2017-11-03T00:11:25.884Z,1509667885.884 [Supervisor](DEBUG): Initializing supervisor.
2017-11-03T00:11:25.887Z,1509667885.887 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2017-11-03T00:11:25.888Z,1509667885.888 [SyncHandler](INFO): Protected caller Thread ID is 5850
2017-11-03T00:11:25.888Z,1509667885.888 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-11-03T00:11:25.889Z,1509667885.889 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2017-11-03T00:11:25.889Z,1509667885.889 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 5851
2017-11-03T00:11:25.892Z,1509667885.892 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-11-03T00:11:25.903Z,1509667885.903 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-11-03T00:11:25.904Z,1509667885.904 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2017-11-03T00:11:25.904Z,1509667885.904 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 5852
2017-11-03T00:11:25.905Z,1509667885.905 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-11-03T00:11:25.906Z,1509667885.906 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2017-11-03T00:11:25.906Z,1509667885.906 [logger ThreadHandler](INFO): Protected caller Thread ID is 5853
2017-11-03T00:11:25.908Z,1509667885.908 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-11-03T00:11:25.908Z,1509667885.908 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-11-03T00:11:25.910Z,1509667885.910 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-11-03T00:11:26.079Z,1509667886.079 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-11-03T00:11:26.080Z,1509667886.080 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-11-03T00:11:26.199Z,1509667886.199 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-11-03T00:11:26.199Z,1509667886.199 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-11-03T00:11:26.553Z,1509667886.553 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-11-03T00:11:26.553Z,1509667886.553 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-11-03T00:11:26.762Z,1509667886.762 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-11-03T00:11:26.763Z,1509667886.763 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-11-03T00:11:26.841Z,1509667886.841 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-11-03T00:11:27.023Z,1509667887.023 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-11-03T00:11:27.024Z,1509667887.024 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-11-03T00:11:27.116Z,1509667887.116 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-11-03T00:11:27.117Z,1509667887.117 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-11-03T00:11:27.373Z,1509667887.373 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-11-03T00:11:27.374Z,1509667887.374 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-11-03T00:11:27.689Z,1509667887.689 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-11-03T00:11:27.689Z,1509667887.689 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-11-03T00:11:27.958Z,1509667887.958 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-11-03T00:11:27.959Z,1509667887.959 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-11-03T00:11:28.409Z,1509667888.409 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-11-03T00:11:28.409Z,1509667888.409 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-11-03T00:11:28.607Z,1509667888.607 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-11-03T00:11:28.607Z,1509667888.607 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-11-03T00:11:28.754Z,1509667888.754 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-11-03T00:11:28.754Z,1509667888.754 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-11-03T00:11:29.162Z,1509667889.162 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-11-03T00:11:29.162Z,1509667889.162 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-11-03T00:11:29.300Z,1509667889.300 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-11-03T00:11:29.302Z,1509667889.302 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/
2017-11-03T00:11:29.303Z,1509667889.303 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Battery.cfg
2017-11-03T00:11:29.516Z,1509667889.516 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-11-03T00:11:29.517Z,1509667889.517 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/BIT.cfg
2017-11-03T00:11:29.619Z,1509667889.619 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Navigation.cfg
2017-11-03T00:11:29.717Z,1509667889.717 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Control.cfg
2017-11-03T00:11:29.810Z,1509667889.810 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Simulator.cfg
2017-11-03T00:11:29.892Z,1509667889.892 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Science.cfg
2017-11-03T00:11:30.028Z,1509667890.028 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Sensor.cfg
2017-11-03T00:11:30.191Z,1509667890.191 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Servo.cfg
2017-11-03T00:11:30.292Z,1509667890.292 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/logger.cfg
2017-11-03T00:11:30.384Z,1509667890.384 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/secure.cfg
2017-11-03T00:11:30.464Z,1509667890.464 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/vehicle.cfg
2017-11-03T00:11:30.621Z,1509667890.621 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/root/
2017-11-03T00:11:30.621Z,1509667890.621 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-11-03T00:11:32.709Z,1509667892.709 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-11-03T00:11:32.836Z,1509667892.836 [SBIT](DEBUG): Construct Startup Built In Test.
2017-11-03T00:11:32.865Z,1509667892.865 [SBIT] Loaded
2017-11-03T00:11:32.865Z,1509667892.865 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-11-03T00:11:32.866Z,1509667892.866 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-11-03T00:11:32.891Z,1509667892.891 [IBIT] Loaded
2017-11-03T00:11:32.892Z,1509667892.892 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-11-03T00:11:32.895Z,1509667892.895 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-11-03T00:11:33.038Z,1509667893.038 [CBIT] Loaded
2017-11-03T00:11:33.038Z,1509667893.038 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-11-03T00:11:33.039Z,1509667893.039 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-11-03T00:11:33.039Z,1509667893.039 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-11-03T00:11:33.104Z,1509667893.104 [VerticalControl](DEBUG): Construct VerticalControl.
2017-11-03T00:11:33.198Z,1509667893.198 [VerticalControl] Loaded
2017-11-03T00:11:33.199Z,1509667893.199 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-11-03T00:11:33.199Z,1509667893.199 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-11-03T00:11:33.258Z,1509667893.258 [HorizontalControl] Loaded
2017-11-03T00:11:33.258Z,1509667893.258 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-11-03T00:11:33.259Z,1509667893.259 [SpeedControl](DEBUG): Construct SpeedControl.
2017-11-03T00:11:33.264Z,1509667893.264 [SpeedControl] Loaded
2017-11-03T00:11:33.265Z,1509667893.265 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-11-03T00:11:33.265Z,1509667893.265 [LoopControl](DEBUG): Construct LoopControl.
2017-11-03T00:11:33.266Z,1509667893.266 [LoopControl] Loaded
2017-11-03T00:11:33.266Z,1509667893.266 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-11-03T00:11:33.266Z,1509667893.266 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-11-03T00:11:33.267Z,1509667893.267 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-11-03T00:11:33.291Z,1509667893.291 [DepthRateCalculator] Loaded
2017-11-03T00:11:33.291Z,1509667893.291 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-11-03T00:11:33.296Z,1509667893.296 [PitchRateCalculator] Loaded
2017-11-03T00:11:33.296Z,1509667893.296 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-11-03T00:11:33.311Z,1509667893.311 [SpeedCalculator] Loaded
2017-11-03T00:11:33.312Z,1509667893.312 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-11-03T00:11:33.333Z,1509667893.333 [TempGradientCalculator] Loaded
2017-11-03T00:11:33.333Z,1509667893.333 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-11-03T00:11:33.347Z,1509667893.347 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-11-03T00:11:33.348Z,1509667893.348 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-11-03T00:11:33.352Z,1509667893.352 [YawRateCalculator] Loaded
2017-11-03T00:11:33.353Z,1509667893.353 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-11-03T00:11:33.353Z,1509667893.353 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-11-03T00:11:33.354Z,1509667893.354 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-11-03T00:11:33.434Z,1509667893.434 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-11-03T00:11:33.434Z,1509667893.434 [StratificationFrontDetector](DEBUG): (re)initializing
2017-11-03T00:11:33.435Z,1509667893.435 [StratificationFrontDetector] Loaded
2017-11-03T00:11:33.435Z,1509667893.435 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-11-03T00:11:33.435Z,1509667893.435 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-11-03T00:11:33.436Z,1509667893.436 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-11-03T00:11:33.708Z,1509667893.708 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-11-03T00:11:33.709Z,1509667893.709 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-11-03T00:11:33.802Z,1509667893.802 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-11-03T00:11:33.802Z,1509667893.802 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-11-03T00:11:33.854Z,1509667893.854 [DeadReckonUsingSpeedCalculator] Loaded
2017-11-03T00:11:33.855Z,1509667893.855 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-11-03T00:11:33.907Z,1509667893.907 [DeadReckonWithRespectToSeafloor] Loaded
2017-11-03T00:11:33.908Z,1509667893.908 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-11-03T00:11:33.923Z,1509667893.923 [NavChart] Loaded
2017-11-03T00:11:33.924Z,1509667893.924 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-11-03T00:11:33.927Z,1509667893.927 [UniversalFixResidualReporter] Loaded
2017-11-03T00:11:33.928Z,1509667893.928 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-11-03T00:11:33.928Z,1509667893.928 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-11-03T00:11:33.929Z,1509667893.929 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-11-03T00:11:33.941Z,1509667893.941 [Module Loader](CRITICAL): Could not find element LcmListener.loadAtStartup
2017-11-03T00:11:33.942Z,1509667893.942 [Module Loader](CRITICAL): Could not find element LcmPublisher.loadAtStartup
2017-11-03T00:11:33.942Z,1509667893.942 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-11-03T00:11:33.943Z,1509667893.943 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-11-03T00:11:34.083Z,1509667894.083 [Aanderaa_O2] Loaded
2017-11-03T00:11:34.083Z,1509667894.083 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-11-03T00:11:34.116Z,1509667894.116 [CTD_Seabird] Loaded
2017-11-03T00:11:34.116Z,1509667894.116 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-11-03T00:11:34.117Z,1509667894.117 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406C34E0
2017-11-03T00:11:34.118Z,1509667894.118 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 5933
2017-11-03T00:11:34.133Z,1509667894.133 [ESPComponent] Loaded
2017-11-03T00:11:34.134Z,1509667894.134 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2017-11-03T00:11:34.147Z,1509667894.147 [PAR_Licor] Loaded
2017-11-03T00:11:34.147Z,1509667894.147 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-11-03T00:11:34.194Z,1509667894.194 [WetLabsBB2FL] Loaded
2017-11-03T00:11:34.194Z,1509667894.194 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-11-03T00:11:34.195Z,1509667894.195 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 406F34E0
2017-11-03T00:11:34.195Z,1509667894.195 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 5934
2017-11-03T00:11:34.196Z,1509667894.196 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-11-03T00:11:34.197Z,1509667894.197 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-11-03T00:11:34.463Z,1509667894.463 [DataOverHttps] Loaded
2017-11-03T00:11:34.463Z,1509667894.463 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-11-03T00:11:34.476Z,1509667894.476 [Depth_Keller] Loaded
2017-11-03T00:11:34.476Z,1509667894.476 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-11-03T00:11:34.481Z,1509667894.481 [DropWeight] Loaded
2017-11-03T00:11:34.481Z,1509667894.481 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-11-03T00:11:34.568Z,1509667894.568 [NAL9602] Loaded
2017-11-03T00:11:34.568Z,1509667894.568 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-11-03T00:11:34.577Z,1509667894.577 [Onboard] Loaded
2017-11-03T00:11:34.577Z,1509667894.577 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-11-03T00:11:34.584Z,1509667894.584 [Radio_Surface] Loaded
2017-11-03T00:11:34.584Z,1509667894.584 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-11-03T00:11:34.585Z,1509667894.585 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409374E0
2017-11-03T00:11:34.586Z,1509667894.586 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 5935
2017-11-03T00:11:34.591Z,1509667894.591 [SCPI] Loaded
2017-11-03T00:11:34.592Z,1509667894.592 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2017-11-03T00:11:34.637Z,1509667894.637 [PNI_TCM] Loaded
2017-11-03T00:11:34.637Z,1509667894.637 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-11-03T00:11:34.695Z,1509667894.695 [Rowe_600LCM] Loaded
2017-11-03T00:11:34.695Z,1509667894.695 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-11-03T00:11:34.696Z,1509667894.696 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 409674E0
2017-11-03T00:11:34.696Z,1509667894.696 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 5936
2017-11-03T00:11:36.600Z,1509667896.600 [BPC1] Loaded
2017-11-03T00:11:36.601Z,1509667896.601 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-11-03T00:11:36.601Z,1509667896.601 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-11-03T00:11:36.602Z,1509667896.602 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-11-03T00:11:36.697Z,1509667896.697 [BuoyancyServo] Loaded
2017-11-03T00:11:36.697Z,1509667896.697 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-11-03T00:11:36.708Z,1509667896.708 [ElevatorServo] Loaded
2017-11-03T00:11:36.709Z,1509667896.709 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-11-03T00:11:36.719Z,1509667896.719 [MassServo] Loaded
2017-11-03T00:11:36.719Z,1509667896.719 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-11-03T00:11:36.730Z,1509667896.730 [RudderServo] Loaded
2017-11-03T00:11:36.730Z,1509667896.730 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-11-03T00:11:36.741Z,1509667896.741 [ThrusterServo] Loaded
2017-11-03T00:11:36.741Z,1509667896.741 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-11-03T00:11:36.741Z,1509667896.741 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-11-03T00:11:36.742Z,1509667896.742 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-11-03T00:11:36.838Z,1509667896.838 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-11-03T00:11:36.838Z,1509667896.838 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-11-03T00:11:36.862Z,1509667896.862 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-11-03T00:11:36.866Z,1509667896.866 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-11-03T00:11:36.866Z,1509667896.866 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-11-03T00:11:36.873Z,1509667896.873 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-11-03T00:11:36.874Z,1509667896.874 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A154E0
2017-11-03T00:11:36.874Z,1509667896.874 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 5937
2017-11-03T00:11:36.879Z,1509667896.879 [Supervisor](INFO): Main Thread ID is 5849
2017-11-03T00:11:36.879Z,1509667896.879 [Supervisor](DEBUG): Running supervisor.
2017-11-03T00:11:36.880Z,1509667896.880 [CommandLine ThreadHandler](INFO): Handler Thread ID is 5938
2017-11-03T00:11:36.883Z,1509667896.883 [controlThread ThreadHandler](INFO): Handler Thread ID is 5939
2017-11-03T00:11:36.883Z,1509667896.883 [controlThread](DEBUG): Initializing ControlThread
2017-11-03T00:11:36.884Z,1509667896.884 [SBIT](INFO): Initialize SBIT Component.
2017-11-03T00:11:36.884Z,1509667896.884 [SBIT](IMPORTANT): git: 2017-10-16-79-ga858579
2017-11-03T00:11:36.884Z,1509667896.884 [SBIT](INFO): git hash: a8585799d0abb9d626597d5adc3105b388fe8787
2017-11-03T00:11:36.885Z,1509667896.885 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2017-11-03T00:11:36.886Z,1509667896.886 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #17 PREEMPT Fri Oct 6 17:22:04 PDT 2017
2017-11-03T00:11:36.887Z,1509667896.887 [SBIT](INFO): Beginning SBIT in 39.000000 seconds.
2017-11-03T00:11:36.888Z,1509667896.888 [IBIT](INFO): Initialize IBIT Component.
2017-11-03T00:11:36.888Z,1509667896.888 [CBIT](DEBUG): Initialize CBIT Component.
2017-11-03T00:11:36.889Z,1509667896.889 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-11-03T00:11:36.890Z,1509667896.890 [logger ThreadHandler](INFO): Handler Thread ID is 5940
2017-11-03T00:11:36.917Z,1509667896.917 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 5941
2017-11-03T00:11:36.917Z,1509667896.917 [CTD_Seabird](INFO): Initializing
2017-11-03T00:11:36.953Z,1509667896.953 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 5943
2017-11-03T00:11:36.954Z,1509667896.954 [WetLabsBB2FL](INFO): Powering down
2017-11-03T00:11:36.973Z,1509667896.973 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-11-03T00:11:36.975Z,1509667896.975 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-11-03T00:11:36.976Z,1509667896.976 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-11-03T00:11:36.976Z,1509667896.976 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-11-03T00:11:36.977Z,1509667896.977 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-11-03T00:11:36.977Z,1509667896.977 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-11-03T00:11:36.977Z,1509667896.977 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-11-03T00:11:36.978Z,1509667896.978 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-11-03T00:11:36.978Z,1509667896.978 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-11-03T00:11:36.979Z,1509667896.979 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-11-03T00:11:36.980Z,1509667896.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:11:36.981Z,1509667896.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:11:36.981Z,1509667896.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:11:36.982Z,1509667896.982 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:11:36.982Z,1509667896.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:11:36.983Z,1509667896.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:11:36.983Z,1509667896.983 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:11:36.983Z,1509667896.983 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:11:36.984Z,1509667896.984 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:11:36.984Z,1509667896.984 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-11-03T00:11:36.985Z,1509667896.985 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-11-03T00:11:36.998Z,1509667896.998 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-11-03T00:11:37.017Z,1509667897.017 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 5944
2017-11-03T00:11:37.023Z,1509667897.023 [Radio_Surface](INFO): Powering up
2017-11-03T00:11:37.041Z,1509667897.041 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 5945
2017-11-03T00:11:37.042Z,1509667897.042 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:11:37.043Z,1509667897.043 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:11:37.052Z,1509667897.052 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:11:37.052Z,1509667897.052 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:11:37.053Z,1509667897.053 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-03T00:11:37.069Z,1509667897.069 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 5946
2017-11-03T00:11:37.072Z,1509667897.072 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-11-03T00:11:37.072Z,1509667897.072 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-11-03T00:11:37.073Z,1509667897.073 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-11-03T00:11:37.073Z,1509667897.073 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-11-03T00:11:37.073Z,1509667897.073 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-11-03T00:11:37.073Z,1509667897.073 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-11-03T00:11:37.073Z,1509667897.073 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-11-03T00:11:37.074Z,1509667897.074 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-11-03T00:11:37.074Z,1509667897.074 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-11-03T00:11:37.074Z,1509667897.074 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-11-03T00:11:37.074Z,1509667897.074 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-11-03T00:11:37.074Z,1509667897.074 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-11-03T00:11:37.075Z,1509667897.075 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-11-03T00:11:37.075Z,1509667897.075 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-11-03T00:11:37.075Z,1509667897.075 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-11-03T00:11:37.075Z,1509667897.075 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-11-03T00:11:37.103Z,1509667897.103 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-11-03T00:11:37.125Z,1509667897.125 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-11-03T00:11:37.217Z,1509667897.217 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-11-03T00:11:37.218Z,1509667897.218 [Default:A.Wait](DEBUG): Construct Wait.
2017-11-03T00:11:37.220Z,1509667897.220 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-03T00:11:37.246Z,1509667897.246 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-11-03T00:11:37.247Z,1509667897.247 [CTD_Seabird](INFO): Powering down
2017-11-03T00:11:37.290Z,1509667897.290 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-11-03T00:11:37.293Z,1509667897.293 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-11-03T00:11:37.314Z,1509667897.314 [Default:E.Execute](DEBUG): Construct Execute.
2017-11-03T00:11:37.318Z,1509667897.318 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-11-03T00:11:37.329Z,1509667897.329 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,SCPI,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-11-03T00:11:37.437Z,1509667897.437 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-11-03T00:11:37.453Z,1509667897.453 [Depth_Keller](ERROR): Pressure reading out of range: 1658.386841 decibar
2017-11-03T00:11:37.687Z,1509667897.687 [DepthRateCalculator](ERROR): Depth measurement is not active
2017-11-03T00:11:37.781Z,1509667897.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:37.781Z,1509667897.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-03T00:11:37.793Z,1509667897.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:37.804Z,1509667897.804 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:37.813Z,1509667897.813 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:37.929Z,1509667897.929 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-03T00:11:37.939Z,1509667897.939 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-03T00:11:37.965Z,1509667897.965 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-11-03T00:11:37.973Z,1509667897.973 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-11-03T00:11:38.014Z,1509667898.014 [MassServo](DEBUG): Initializing EZServoServo.
2017-11-03T00:11:38.025Z,1509667898.025 [MassServo](DEBUG): Initializing MassServo.
2017-11-03T00:11:38.038Z,1509667898.038 [RudderServo](DEBUG): Initializing EZServoServo.
2017-11-03T00:11:38.041Z,1509667898.041 [RudderServo](DEBUG): Initializing RudderServo.
2017-11-03T00:11:38.062Z,1509667898.062 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-11-03T00:11:38.069Z,1509667898.069 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-11-03T00:11:38.126Z,1509667898.126 [CommandLine](FAULT): Scheduling is paused
2017-11-03T00:11:38.126Z,1509667898.126 [CBIT](INFO): Critical error at 20171103T001133
2017-11-03T00:11:38.126Z,1509667898.126 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-11-03T00:11:38.466Z,1509667898.466 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T00:11:38.466Z,1509667898.466 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T00:11:38.466Z,1509667898.466 [DropWeight](ERROR): Hardware Fault
2017-11-03T00:11:38.529Z,1509667898.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:38.529Z,1509667898.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-03T00:11:38.530Z,1509667898.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:38.531Z,1509667898.531 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:38.532Z,1509667898.532 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:38.872Z,1509667898.872 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2017-11-03T00:11:38.873Z,1509667898.873 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-11-03T00:11:38.873Z,1509667898.873 [BuoyancyServo] Communications Fault, FailCount= 1
2017-11-03T00:11:38.873Z,1509667898.873 [BuoyancyServo](ERROR): Communications Fault
2017-11-03T00:11:39.070Z,1509667899.070 [CBIT](INFO): Critical error at 20171103T001138
2017-11-03T00:11:39.073Z,1509667899.073 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T00:11:39.073Z,1509667899.073 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T00:11:39.073Z,1509667899.073 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2017-11-03T00:11:41.354Z,1509667901.354 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:11:41.503Z,1509667901.503 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:11:41.647Z,1509667901.647 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:11:41.672Z,1509667901.672 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:11:41.673Z,1509667901.673 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:11:48.641Z,1509667908.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:48.643Z,1509667908.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:48.644Z,1509667908.644 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:48.645Z,1509667908.645 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:48.670Z,1509667908.670 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-11-03T00:11:48.670Z,1509667908.670 [BuoyancyServo](INFO): Powering down
2017-11-03T00:11:48.761Z,1509667908.761 [CBIT](INFO): Critical error at 20171103T001139
2017-11-03T00:11:48.845Z,1509667908.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:48.846Z,1509667908.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:48.846Z,1509667908.846 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:48.847Z,1509667908.847 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:49.276Z,1509667909.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:49.278Z,1509667909.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:49.278Z,1509667909.278 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:49.279Z,1509667909.279 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:49.572Z,1509667909.572 [Aanderaa_O2](INFO): Powering down
2017-11-03T00:11:49.608Z,1509667909.608 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.005303
2017-11-03T00:11:49.686Z,1509667909.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:49.687Z,1509667909.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:49.687Z,1509667909.687 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:49.696Z,1509667909.696 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:50.008Z,1509667910.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:50.009Z,1509667910.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:50.010Z,1509667910.010 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:50.011Z,1509667910.011 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:50.472Z,1509667910.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:50.474Z,1509667910.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:50.474Z,1509667910.474 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:50.475Z,1509667910.475 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-03T00:11:50.845Z,1509667910.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:50.901Z,1509667910.901 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2017-11-03T00:11:50.901Z,1509667910.901 [BuoyancyServo] No Fault, FailCount= 1
2017-11-03T00:11:51.287Z,1509667911.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:51.311Z,1509667911.311 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-03T00:11:51.312Z,1509667911.312 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-03T00:11:51.662Z,1509667911.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:52.063Z,1509667912.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:52.469Z,1509667912.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:52.873Z,1509667912.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:53.260Z,1509667913.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:53.615Z,1509667913.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:54.038Z,1509667914.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:54.432Z,1509667914.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:54.838Z,1509667914.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:55.286Z,1509667915.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:55.650Z,1509667915.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:56.042Z,1509667916.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:56.442Z,1509667916.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:56.839Z,1509667916.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:57.252Z,1509667917.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:57.620Z,1509667917.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:58.040Z,1509667918.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:58.474Z,1509667918.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:58.844Z,1509667918.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:59.219Z,1509667919.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:11:59.626Z,1509667919.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:00.041Z,1509667920.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:00.423Z,1509667920.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:00.834Z,1509667920.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:01.224Z,1509667921.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:01.619Z,1509667921.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:02.038Z,1509667922.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:02.454Z,1509667922.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:02.819Z,1509667922.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:03.310Z,1509667923.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:03.643Z,1509667923.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:04.019Z,1509667924.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:04.499Z,1509667924.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:04.794Z,1509667924.794 [NAL9602](INFO): Powering up NAL9602
2017-11-03T00:12:04.864Z,1509667924.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:05.248Z,1509667925.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:05.659Z,1509667925.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:06.022Z,1509667926.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:06.485Z,1509667926.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:06.859Z,1509667926.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:07.261Z,1509667927.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:07.648Z,1509667927.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:08.014Z,1509667928.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:08.480Z,1509667928.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:08.827Z,1509667928.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:09.322Z,1509667929.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:09.675Z,1509667929.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:10.027Z,1509667930.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:10.428Z,1509667930.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:10.849Z,1509667930.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:11.229Z,1509667931.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:11.650Z,1509667931.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:12.070Z,1509667932.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:12.428Z,1509667932.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:12.879Z,1509667932.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:13.259Z,1509667933.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:13.633Z,1509667933.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:14.049Z,1509667934.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:14.430Z,1509667934.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:14.815Z,1509667934.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:15.218Z,1509667935.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:15.642Z,1509667935.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:15.990Z,1509667935.990 [NAL9602](INFO): NAL9602 initialized
2017-11-03T00:12:16.050Z,1509667936.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:16.463Z,1509667936.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:16.499Z,1509667936.499 [SBIT](IMPORTANT): Beginning Startup BIT
2017-11-03T00:12:16.516Z,1509667936.516 [CBIT](IMPORTANT): Beginning ground fault scan
2017-11-03T00:12:16.863Z,1509667936.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:17.297Z,1509667937.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:17.703Z,1509667937.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:18.050Z,1509667938.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:18.432Z,1509667938.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:19.038Z,1509667939.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:19.391Z,1509667939.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:19.790Z,1509667939.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:20.207Z,1509667940.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:20.570Z,1509667940.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:21.036Z,1509667941.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:21.419Z,1509667941.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:21.796Z,1509667941.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:22.191Z,1509667942.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:22.603Z,1509667942.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:22.971Z,1509667942.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:23.404Z,1509667943.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:23.775Z,1509667943.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:24.223Z,1509667944.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:24.605Z,1509667944.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:25.014Z,1509667945.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:25.455Z,1509667945.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:25.826Z,1509667945.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:26.216Z,1509667946.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:26.577Z,1509667946.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:26.982Z,1509667946.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:27.409Z,1509667947.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:27.551Z,1509667947.551 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.014432
CHAN A1 (24V): -0.067474
CHAN A2 (12V): -0.000259
CHAN A3 (5V): -0.021467
CHAN B0 (3.3V): -0.000432
CHAN B1 (3.15aV): -0.000668
CHAN B2 (3.15bV): -0.000450
CHAN B3 (GND): -0.000319
OPEN: 0.003508
Full Scale Calc: 4.765 mA, -1.589 mA
2017-11-03T00:12:27.806Z,1509667947.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:28.210Z,1509667948.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:28.587Z,1509667948.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:28.979Z,1509667948.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:29.438Z,1509667949.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:29.809Z,1509667949.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:30.211Z,1509667950.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:30.613Z,1509667950.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:31.003Z,1509667951.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:31.379Z,1509667951.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:31.938Z,1509667951.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:32.391Z,1509667952.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:32.767Z,1509667952.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:33.231Z,1509667953.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:33.619Z,1509667953.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:33.970Z,1509667953.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:34.386Z,1509667954.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:34.774Z,1509667954.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:35.247Z,1509667955.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:35.586Z,1509667955.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:35.977Z,1509667955.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:36.331Z,1509667956.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:36.748Z,1509667956.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:37.134Z,1509667957.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:37.548Z,1509667957.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:37.959Z,1509667957.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:42.262Z,1509667962.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:42.418Z,1509667962.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:42.780Z,1509667962.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:43.180Z,1509667963.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:43.566Z,1509667963.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:43.000Z,1509667964.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:44.367Z,1509667964.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:44.775Z,1509667964.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:45.225Z,1509667965.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:45.567Z,1509667965.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:45.969Z,1509667965.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:46.371Z,1509667966.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:46.779Z,1509667966.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:47.261Z,1509667967.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:47.578Z,1509667967.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:48.026Z,1509667968.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:48.383Z,1509667968.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:48.772Z,1509667968.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:49.285Z,1509667969.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:49.569Z,1509667969.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:50.014Z,1509667970.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:50.407Z,1509667970.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:50.768Z,1509667970.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:51.209Z,1509667971.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:51.571Z,1509667971.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:51.975Z,1509667971.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:52.380Z,1509667972.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:52.781Z,1509667972.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:53.180Z,1509667973.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:53.586Z,1509667973.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:53.969Z,1509667973.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:54.376Z,1509667974.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:54.779Z,1509667974.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:55.159Z,1509667975.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:55.587Z,1509667975.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:55.981Z,1509667975.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:56.380Z,1509667976.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:56.780Z,1509667976.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:57.157Z,1509667977.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:57.584Z,1509667977.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:57.983Z,1509667977.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:58.388Z,1509667978.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:58.979Z,1509667978.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:59.354Z,1509667979.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:12:59.766Z,1509667979.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:00.144Z,1509667980.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:00.548Z,1509667980.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:00.950Z,1509667980.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:01.348Z,1509667981.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:01.747Z,1509667981.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:02.149Z,1509667982.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:02.618Z,1509667982.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:02.958Z,1509667982.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:03.403Z,1509667983.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:03.755Z,1509667983.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:04.171Z,1509667984.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:04.567Z,1509667984.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:04.952Z,1509667984.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:05.350Z,1509667985.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:05.754Z,1509667985.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:06.152Z,1509667986.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:06.552Z,1509667986.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:06.953Z,1509667986.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:07.352Z,1509667987.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:07.761Z,1509667987.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:08.163Z,1509667988.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:08.562Z,1509667988.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:08.962Z,1509667988.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:09.336Z,1509667989.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:09.785Z,1509667989.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:09.885Z,1509667989.885 [SBIT](IMPORTANT): SBIT PASSED
2017-11-03T00:13:10.136Z,1509667990.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:10.139Z,1509667990.139 [MissionManager](IMPORTANT): Started mission Startup
2017-11-03T00:13:10.140Z,1509667990.140 [Startup] Running Loop=1
2017-11-03T00:13:10.140Z,1509667990.140 [Startup](DEBUG): Aggregate::initialize Startup
2017-11-03T00:13:10.140Z,1509667990.140 [Startup:A.GoToSurface] Running Loop=1
2017-11-03T00:13:10.140Z,1509667990.140 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-03T00:13:10.141Z,1509667990.141 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-03T00:13:10.141Z,1509667990.141 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-03T00:13:10.142Z,1509667990.142 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-03T00:13:10.142Z,1509667990.142 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-03T00:13:10.142Z,1509667990.142 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-03T00:13:10.164Z,1509667990.164 [Startup:StartupSatComms] Running Loop=1
2017-11-03T00:13:10.165Z,1509667990.165 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-11-03T00:13:10.165Z,1509667990.165 [Startup:StartupSatComms:A] Running Loop=1
2017-11-03T00:13:10.539Z,1509667990.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:10.543Z,1509667990.543 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-11-03T00:13:10.974Z,1509667990.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:11.347Z,1509667991.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:11.774Z,1509667991.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:12.139Z,1509667992.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:12.539Z,1509667992.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:12.952Z,1509667992.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:13.371Z,1509667993.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:13.771Z,1509667993.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:14.171Z,1509667994.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:14.539Z,1509667994.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:14.939Z,1509667994.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:15.351Z,1509667995.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:15.741Z,1509667995.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:16.139Z,1509667996.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:16.589Z,1509667996.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:16.990Z,1509667996.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:17.341Z,1509667997.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:17.783Z,1509667997.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:18.149Z,1509667998.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:18.583Z,1509667998.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:18.980Z,1509667998.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:19.360Z,1509667999.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:19.745Z,1509667999.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:20.147Z,1509668000.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:20.546Z,1509668000.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:20.944Z,1509668000.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:21.345Z,1509668001.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:21.750Z,1509668001.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:22.145Z,1509668002.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:22.545Z,1509668002.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:22.943Z,1509668002.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:23.359Z,1509668003.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:23.799Z,1509668003.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:24.155Z,1509668004.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:24.558Z,1509668004.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:24.950Z,1509668004.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:25.345Z,1509668005.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:25.791Z,1509668005.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:26.148Z,1509668006.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:26.548Z,1509668006.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:26.947Z,1509668006.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:27.358Z,1509668007.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:27.747Z,1509668007.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:28.147Z,1509668008.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:28.559Z,1509668008.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:28.959Z,1509668008.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:29.354Z,1509668009.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:29.758Z,1509668009.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:30.147Z,1509668010.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:30.548Z,1509668010.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:30.999Z,1509668010.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:31.350Z,1509668011.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:31.736Z,1509668011.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:32.166Z,1509668012.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:32.536Z,1509668012.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:32.975Z,1509668012.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:33.386Z,1509668013.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:33.763Z,1509668013.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:34.163Z,1509668014.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:34.563Z,1509668014.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:34.963Z,1509668014.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:35.336Z,1509668015.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:35.766Z,1509668015.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:36.143Z,1509668016.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:36.543Z,1509668016.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:36.939Z,1509668016.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:37.064Z,1509668017.064 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:13:37.064Z,1509668017.064 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T00:13:37.064Z,1509668017.064 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:13:37.346Z,1509668017.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:13:37.347Z,1509668017.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:37.453Z,1509668017.453 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:13:37.469Z,1509668017.469 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:13:37.570Z,1509668017.570 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:13:37.744Z,1509668017.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:13:37.745Z,1509668017.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:38.143Z,1509668018.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:13:38.144Z,1509668018.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:41.274Z,1509668021.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T00:13:41.275Z,1509668021.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:41.369Z,1509668021.369 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:13:41.369Z,1509668021.369 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T00:13:41.474Z,1509668021.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T00:13:41.474Z,1509668021.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:41.608Z,1509668021.608 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:13:41.609Z,1509668021.609 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:13:41.609Z,1509668021.609 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:13:41.609Z,1509668021.609 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:13:41.850Z,1509668021.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T00:13:41.851Z,1509668021.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:42.239Z,1509668022.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T00:13:42.240Z,1509668022.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:42.635Z,1509668022.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T00:13:42.637Z,1509668022.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:43.034Z,1509668023.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T00:13:43.035Z,1509668023.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:43.434Z,1509668023.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T00:13:43.435Z,1509668023.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:43.827Z,1509668023.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T00:13:43.829Z,1509668023.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:44.234Z,1509668024.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T00:13:44.235Z,1509668024.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:44.634Z,1509668024.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T00:13:44.635Z,1509668024.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:45.028Z,1509668025.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T00:13:45.029Z,1509668025.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:45.491Z,1509668025.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T00:13:45.492Z,1509668025.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:45.731Z,1509668025.731 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:13:45.843Z,1509668025.843 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:13:45.845Z,1509668025.845 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:13:45.846Z,1509668025.846 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:13:45.846Z,1509668025.846 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:13:45.860Z,1509668025.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T00:13:45.901Z,1509668025.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:46.286Z,1509668026.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:46.741Z,1509668026.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:47.085Z,1509668027.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:47.450Z,1509668027.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:47.886Z,1509668027.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:48.219Z,1509668028.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:48.619Z,1509668028.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:49.020Z,1509668029.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:49.423Z,1509668029.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:49.849Z,1509668029.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:50.219Z,1509668030.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:50.623Z,1509668030.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:51.018Z,1509668031.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:51.458Z,1509668031.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:51.850Z,1509668031.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:52.252Z,1509668032.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:52.654Z,1509668032.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:53.022Z,1509668033.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:53.459Z,1509668033.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:53.831Z,1509668033.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:54.222Z,1509668034.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:54.622Z,1509668034.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:55.027Z,1509668035.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:55.420Z,1509668035.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:55.827Z,1509668035.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:56.227Z,1509668036.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:56.649Z,1509668036.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:57.051Z,1509668037.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:57.453Z,1509668037.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:57.849Z,1509668037.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:58.222Z,1509668038.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:58.627Z,1509668038.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:59.015Z,1509668039.015 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T00:13:59.015Z,1509668039.015 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:13:59.016Z,1509668039.016 [BPC1](ERROR): Data Fault
2017-11-03T00:13:59.024Z,1509668039.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:59.129Z,1509668039.129 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:13:59.503Z,1509668039.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:13:59.823Z,1509668039.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:00.227Z,1509668040.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:00.329Z,1509668040.329 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:14:00.329Z,1509668040.329 [BPC1] No Fault, FailCount= 1
2017-11-03T00:14:00.695Z,1509668040.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:01.022Z,1509668041.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:01.459Z,1509668041.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:01.854Z,1509668041.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:02.236Z,1509668042.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:02.636Z,1509668042.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:03.036Z,1509668043.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:03.423Z,1509668043.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:03.835Z,1509668043.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:04.228Z,1509668044.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:04.623Z,1509668044.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:05.022Z,1509668045.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:05.427Z,1509668045.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:05.823Z,1509668045.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:06.223Z,1509668046.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:06.625Z,1509668046.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:07.028Z,1509668047.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:07.453Z,1509668047.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:07.836Z,1509668047.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:08.229Z,1509668048.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:08.624Z,1509668048.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:09.024Z,1509668049.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:09.428Z,1509668049.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:09.825Z,1509668049.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:10.229Z,1509668050.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:10.232Z,1509668050.232 [Startup:StartupSatComms:A](INFO): Timed out from 2017-11-03T00:13:10.2Z
2017-11-03T00:14:10.232Z,1509668050.232 [Startup:StartupSatComms:A] Stopped
2017-11-03T00:14:10.232Z,1509668050.232 [Startup:StartupSatComms:B] Running Loop=1
2017-11-03T00:14:10.629Z,1509668050.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:10.633Z,1509668050.633 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-03T00:14:11.026Z,1509668051.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:11.431Z,1509668051.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:14.691Z,1509668054.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:14.793Z,1509668054.793 [DataOverHttps](INFO): Sending 215 bytes from file Logs/19700101T000451/Courier0000.lzma
2017-11-03T00:14:14.887Z,1509668054.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:15.267Z,1509668055.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:15.595Z,1509668055.595 [DataOverHttps](INFO): Moved sent file to Logs/19700101T000451/Courier0000.lzma.bak
2017-11-03T00:14:15.595Z,1509668055.595 [DataOverHttps](INFO): SBD MOMSN=5182177
2017-11-03T00:14:15.758Z,1509668055.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:16.132Z,1509668056.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:16.478Z,1509668056.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:19.775Z,1509668059.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:19.947Z,1509668059.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:20.325Z,1509668060.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:20.731Z,1509668060.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:21.177Z,1509668061.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:21.523Z,1509668061.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:24.704Z,1509668064.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:24.826Z,1509668064.826 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171026T231851/Courier0008.lzma
2017-11-03T00:14:24.889Z,1509668064.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:25.316Z,1509668065.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:25.622Z,1509668065.622 [DataOverHttps](INFO): Moved sent file to Logs/20171026T231851/Courier0008.lzma.bak
2017-11-03T00:14:25.622Z,1509668065.622 [DataOverHttps](INFO): SBD MOMSN=5182184
2017-11-03T00:14:25.700Z,1509668065.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:26.177Z,1509668066.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:26.479Z,1509668066.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:29.744Z,1509668069.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:29.959Z,1509668069.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:30.343Z,1509668070.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:30.741Z,1509668070.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:31.131Z,1509668071.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:31.599Z,1509668071.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:34.731Z,1509668074.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:34.829Z,1509668074.829 [DataOverHttps](INFO): Sending 214 bytes from file Logs/20171103T001125/Courier0000.lzma
2017-11-03T00:14:34.905Z,1509668074.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:35.335Z,1509668075.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:35.631Z,1509668075.631 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0000.lzma.bak
2017-11-03T00:14:35.631Z,1509668075.631 [DataOverHttps](INFO): SBD MOMSN=5182186
2017-11-03T00:14:35.726Z,1509668075.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:36.211Z,1509668076.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:36.487Z,1509668076.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:39.787Z,1509668079.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:39.787Z,1509668079.787 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-11-03T00:14:39.787Z,1509668079.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:14:39.789Z,1509668079.789 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:39.789Z,1509668079.789 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-11-03T00:14:39.789Z,1509668079.789 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:14:39.791Z,1509668079.791 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:39.791Z,1509668079.791 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-03T00:14:39.791Z,1509668079.791 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:14:39.885Z,1509668079.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:14:39.885Z,1509668079.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:14:39.885Z,1509668079.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:14:40.066Z,1509668080.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:14:40.066Z,1509668080.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-11-03T00:14:40.067Z,1509668080.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:14:40.067Z,1509668080.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-11-03T00:14:40.073Z,1509668080.073 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:14:40.073Z,1509668080.073 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-03T00:14:40.357Z,1509668080.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:14:40.358Z,1509668080.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:14:40.358Z,1509668080.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:14:40.359Z,1509668080.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:14:40.359Z,1509668080.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:14:40.359Z,1509668080.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:14:40.360Z,1509668080.360 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:14:40.360Z,1509668080.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:14:40.361Z,1509668080.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:14:40.759Z,1509668080.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:41.146Z,1509668081.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:41.551Z,1509668081.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:44.770Z,1509668084.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:44.902Z,1509668084.902 [DataOverHttps](INFO): Sending 595 bytes from file Logs/19700101T000451/Express0001.lzma
2017-11-03T00:14:44.985Z,1509668084.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:45.362Z,1509668085.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:45.713Z,1509668085.713 [DataOverHttps](INFO): Moved sent file to Logs/19700101T000451/Express0001.lzma.bak
2017-11-03T00:14:45.713Z,1509668085.713 [DataOverHttps](INFO): SBD MOMSN=5182193
2017-11-03T00:14:45.805Z,1509668085.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:46.345Z,1509668086.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:46.548Z,1509668086.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:49.861Z,1509668089.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:50.019Z,1509668090.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:50.400Z,1509668090.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:50.794Z,1509668090.794 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T00:14:50.795Z,1509668090.795 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:14:50.795Z,1509668090.795 [BPC1](ERROR): Data Fault
2017-11-03T00:14:50.806Z,1509668090.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:50.905Z,1509668090.905 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:14:51.203Z,1509668091.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:51.599Z,1509668091.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:54.796Z,1509668094.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:54.873Z,1509668094.873 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:14:54.873Z,1509668094.873 [BPC1] No Fault, FailCount= 1
2017-11-03T00:14:55.787Z,1509668095.787 [DataOverHttps](INFO): Sending 186 bytes from file Logs/20171026T231851/Express0009.lzma
2017-11-03T00:14:55.971Z,1509668095.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:56.121Z,1509668096.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:56.474Z,1509668096.474 [DataOverHttps](INFO): Moved sent file to Logs/20171026T231851/Express0009.lzma.bak
2017-11-03T00:14:56.475Z,1509668096.475 [DataOverHttps](INFO): SBD MOMSN=5182213
2017-11-03T00:14:56.547Z,1509668096.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:57.345Z,1509668097.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:14:57.504Z,1509668097.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:00.702Z,1509668100.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:00.876Z,1509668100.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:01.265Z,1509668101.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:01.672Z,1509668101.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:02.060Z,1509668102.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:02.459Z,1509668102.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:05.758Z,1509668105.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:05.862Z,1509668105.862 [DataOverHttps](INFO): Sending 690 bytes from file Logs/20171103T001125/Express0001.lzma
2017-11-03T00:15:05.951Z,1509668105.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:06.316Z,1509668106.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:06.659Z,1509668106.659 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0001.lzma.bak
2017-11-03T00:15:06.659Z,1509668106.659 [DataOverHttps](INFO): SBD MOMSN=5182217
2017-11-03T00:15:06.753Z,1509668106.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:07.379Z,1509668107.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:07.383Z,1509668107.383 [Startup:StartupSatComms:B] Stopped
2017-11-03T00:15:07.383Z,1509668107.383 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-11-03T00:15:07.383Z,1509668107.383 [Startup:StartupSatComms] Stopped
2017-11-03T00:15:07.383Z,1509668107.383 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-11-03T00:15:07.384Z,1509668107.384 [Startup](INFO): Completed Startup
2017-11-03T00:15:07.384Z,1509668107.384 [MissionManager](INFO): Startup is completed.
2017-11-03T00:15:07.400Z,1509668107.400 [MissionManager](INFO): Uninitializing Mission Startup
2017-11-03T00:15:07.400Z,1509668107.400 [Startup] Stopped
2017-11-03T00:15:07.401Z,1509668107.401 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-11-03T00:15:07.401Z,1509668107.401 [Startup:A.GoToSurface] Stopped
2017-11-03T00:15:07.401Z,1509668107.401 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-11-03T00:15:07.548Z,1509668107.548 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T00:15:07.549Z,1509668107.549 [BPC1] Data Fault, FailCount= 2
2017-11-03T00:15:07.549Z,1509668107.549 [BPC1](ERROR): Data Fault
2017-11-03T00:15:07.563Z,1509668107.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:07.566Z,1509668107.566 [MissionManager](IMPORTANT): Started mission Default
2017-11-03T00:15:07.566Z,1509668107.566 [Default] Running Loop=1
2017-11-03T00:15:07.566Z,1509668107.566 [Default](DEBUG): Aggregate::initialize Default
2017-11-03T00:15:07.566Z,1509668107.566 [Default:B.GoToSurface] Running Loop=1
2017-11-03T00:15:07.566Z,1509668107.566 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-03T00:15:07.567Z,1509668107.567 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-03T00:15:07.567Z,1509668107.567 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-03T00:15:07.567Z,1509668107.567 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-03T00:15:07.568Z,1509668107.568 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-03T00:15:07.568Z,1509668107.568 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-03T00:15:07.570Z,1509668107.570 [Default:A.Wait] Running Loop=1
2017-11-03T00:15:07.570Z,1509668107.570 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-11-03T00:15:07.664Z,1509668107.664 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:15:10.743Z,1509668110.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:10.920Z,1509668110.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:11.322Z,1509668111.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:11.410Z,1509668111.410 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:15:11.410Z,1509668111.410 [BPC1] No Fault, FailCount= 2
2017-11-03T00:15:11.823Z,1509668111.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:12.099Z,1509668112.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:12.498Z,1509668112.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:12.931Z,1509668112.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:13.301Z,1509668113.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:13.783Z,1509668113.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:14.102Z,1509668114.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:14.503Z,1509668114.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:14.903Z,1509668114.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:15.302Z,1509668115.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:15.715Z,1509668115.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:16.110Z,1509668116.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:16.515Z,1509668116.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:16.911Z,1509668116.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:17.301Z,1509668117.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:17.695Z,1509668117.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:18.103Z,1509668118.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:18.508Z,1509668118.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:18.902Z,1509668118.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:19.303Z,1509668119.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:19.702Z,1509668119.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:20.099Z,1509668120.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:20.507Z,1509668120.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:20.910Z,1509668120.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:20.914Z,1509668120.914 [Default:A.Wait](INFO): Done Waiting.
2017-11-03T00:15:20.914Z,1509668120.914 [Default:A.Wait] Stopped
2017-11-03T00:15:20.914Z,1509668120.914 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T00:15:21.323Z,1509668121.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:21.327Z,1509668121.327 [Default:CheckIn] Running Loop=1
2017-11-03T00:15:21.327Z,1509668121.327 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T00:15:21.327Z,1509668121.327 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T00:15:21.715Z,1509668121.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:21.719Z,1509668121.719 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-11-03T00:15:22.107Z,1509668122.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:22.502Z,1509668122.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:22.903Z,1509668122.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:23.299Z,1509668123.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:23.715Z,1509668123.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:24.091Z,1509668124.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:24.491Z,1509668124.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:24.966Z,1509668124.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:25.294Z,1509668125.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:25.774Z,1509668125.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:26.097Z,1509668126.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:26.535Z,1509668126.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:26.950Z,1509668126.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:27.321Z,1509668127.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:27.750Z,1509668127.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:28.098Z,1509668128.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:28.497Z,1509668128.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:28.899Z,1509668128.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:29.296Z,1509668129.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:29.698Z,1509668129.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:30.097Z,1509668130.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:30.494Z,1509668130.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:30.896Z,1509668130.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:31.301Z,1509668131.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:31.722Z,1509668131.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:32.122Z,1509668132.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:32.499Z,1509668132.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:32.898Z,1509668132.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:33.296Z,1509668133.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:33.691Z,1509668133.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:34.097Z,1509668134.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:34.495Z,1509668134.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:34.930Z,1509668134.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:35.287Z,1509668135.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:35.749Z,1509668135.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:36.099Z,1509668136.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:36.511Z,1509668136.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:36.900Z,1509668136.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:37.302Z,1509668137.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:37.707Z,1509668137.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:38.091Z,1509668138.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:38.495Z,1509668138.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:38.939Z,1509668138.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:39.319Z,1509668139.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:39.708Z,1509668139.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:40.142Z,1509668140.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:40.492Z,1509668140.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:40.922Z,1509668140.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:41.335Z,1509668141.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:41.615Z,1509668141.615 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:15:41.615Z,1509668141.615 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T00:15:41.615Z,1509668141.615 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:15:41.764Z,1509668141.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:15:41.769Z,1509668141.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:41.861Z,1509668141.861 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:15:42.016Z,1509668142.016 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:15:42.143Z,1509668142.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:15:42.153Z,1509668142.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:42.236Z,1509668142.236 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:15:42.523Z,1509668142.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:15:42.524Z,1509668142.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:42.908Z,1509668142.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:15:42.909Z,1509668142.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:43.306Z,1509668143.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:15:43.307Z,1509668143.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:43.699Z,1509668143.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:15:43.701Z,1509668143.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:43.793Z,1509668143.793 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:15:43.793Z,1509668143.793 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T00:15:43.852Z,1509668143.852 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:15:43.853Z,1509668143.853 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:15:43.853Z,1509668143.853 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:15:43.853Z,1509668143.853 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:15:44.106Z,1509668144.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:15:44.107Z,1509668144.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:44.499Z,1509668144.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:15:44.501Z,1509668144.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:44.900Z,1509668144.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:15:44.901Z,1509668144.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:45.300Z,1509668145.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:15:45.301Z,1509668145.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:45.702Z,1509668145.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:15:45.703Z,1509668145.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:46.102Z,1509668146.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:15:46.103Z,1509668146.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:46.506Z,1509668146.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:15:46.507Z,1509668146.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:46.914Z,1509668146.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:15:46.915Z,1509668146.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:47.307Z,1509668147.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:15:47.309Z,1509668147.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:47.711Z,1509668147.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:15:47.713Z,1509668147.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:47.970Z,1509668147.970 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:15:48.037Z,1509668148.037 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:15:48.038Z,1509668148.038 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:15:48.039Z,1509668148.039 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:15:48.040Z,1509668148.040 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:15:48.159Z,1509668148.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:15:48.160Z,1509668148.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:48.515Z,1509668148.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:48.994Z,1509668148.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:49.297Z,1509668149.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:49.703Z,1509668149.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:50.103Z,1509668150.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:50.501Z,1509668150.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:50.903Z,1509668150.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:51.297Z,1509668151.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:51.697Z,1509668151.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:52.102Z,1509668152.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:52.506Z,1509668152.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:52.902Z,1509668152.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:53.354Z,1509668153.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:53.754Z,1509668153.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:54.095Z,1509668154.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:54.505Z,1509668154.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:54.939Z,1509668154.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:55.299Z,1509668155.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:55.742Z,1509668155.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:56.107Z,1509668156.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:56.551Z,1509668156.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:56.903Z,1509668156.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:57.329Z,1509668157.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:57.720Z,1509668157.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:58.110Z,1509668158.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:58.546Z,1509668158.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:58.899Z,1509668158.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:59.309Z,1509668159.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:15:59.743Z,1509668159.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:00.108Z,1509668160.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:00.520Z,1509668160.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:00.938Z,1509668160.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:01.335Z,1509668161.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:01.699Z,1509668161.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:02.096Z,1509668162.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:02.499Z,1509668162.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:02.927Z,1509668162.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:03.307Z,1509668163.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:03.708Z,1509668163.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:04.099Z,1509668164.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:04.496Z,1509668164.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:04.897Z,1509668164.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:05.297Z,1509668165.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:05.694Z,1509668165.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:06.097Z,1509668166.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:06.498Z,1509668166.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:06.895Z,1509668166.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:07.293Z,1509668167.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:07.723Z,1509668167.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:08.203Z,1509668168.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:11.296Z,1509668171.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:11.492Z,1509668171.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:11.880Z,1509668171.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:12.299Z,1509668172.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:12.661Z,1509668172.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:13.080Z,1509668173.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:13.489Z,1509668173.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:13.860Z,1509668173.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:14.305Z,1509668174.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:14.657Z,1509668174.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:15.057Z,1509668175.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:15.452Z,1509668175.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:15.855Z,1509668175.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:16.256Z,1509668176.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:16.657Z,1509668176.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:17.055Z,1509668177.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:17.455Z,1509668177.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:17.860Z,1509668177.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:17.876Z,1509668177.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:18.245Z,1509668178.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:18.260Z,1509668178.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:18.645Z,1509668178.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:18.731Z,1509668178.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:19.033Z,1509668179.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:19.060Z,1509668179.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:19.424Z,1509668179.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:19.439Z,1509668179.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:19.830Z,1509668179.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:19.859Z,1509668179.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:20.223Z,1509668180.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:20.238Z,1509668180.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:20.621Z,1509668180.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:20.636Z,1509668180.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:21.029Z,1509668181.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:21.044Z,1509668181.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:21.431Z,1509668181.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:21.450Z,1509668181.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:21.832Z,1509668181.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:21.847Z,1509668181.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:22.233Z,1509668182.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:22.256Z,1509668182.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:22.633Z,1509668182.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:22.648Z,1509668182.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:23.040Z,1509668183.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:23.055Z,1509668183.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:23.441Z,1509668183.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:23.456Z,1509668183.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:23.840Z,1509668183.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:23.862Z,1509668183.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:24.244Z,1509668184.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:24.259Z,1509668184.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:24.633Z,1509668184.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:24.648Z,1509668184.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:25.037Z,1509668185.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:25.060Z,1509668185.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:25.433Z,1509668185.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:25.507Z,1509668185.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:25.831Z,1509668185.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:25.853Z,1509668185.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:26.238Z,1509668186.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:26.259Z,1509668186.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:26.634Z,1509668186.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:26.694Z,1509668186.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:27.032Z,1509668187.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:27.047Z,1509668187.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:27.420Z,1509668187.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:27.471Z,1509668187.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:27.834Z,1509668187.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:27.891Z,1509668187.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:28.260Z,1509668188.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:16:28.287Z,1509668188.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:28.671Z,1509668188.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:29.063Z,1509668189.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:29.471Z,1509668189.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:29.841Z,1509668189.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:30.271Z,1509668190.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:30.663Z,1509668190.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:31.038Z,1509668191.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:31.463Z,1509668191.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:31.839Z,1509668191.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:32.263Z,1509668192.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:32.639Z,1509668192.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:33.047Z,1509668193.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:33.470Z,1509668193.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:33.870Z,1509668193.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:34.272Z,1509668194.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:34.652Z,1509668194.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:35.050Z,1509668195.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:35.449Z,1509668195.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:35.854Z,1509668195.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:36.251Z,1509668196.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:36.649Z,1509668196.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:37.051Z,1509668197.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:37.450Z,1509668197.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:37.849Z,1509668197.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:38.263Z,1509668198.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:38.661Z,1509668198.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:39.060Z,1509668199.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:39.507Z,1509668199.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:39.860Z,1509668199.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:40.307Z,1509668200.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:40.658Z,1509668200.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:41.055Z,1509668201.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:41.475Z,1509668201.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:41.852Z,1509668201.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:42.322Z,1509668202.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:42.679Z,1509668202.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:43.059Z,1509668203.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:43.439Z,1509668203.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:43.860Z,1509668203.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:44.261Z,1509668204.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:44.664Z,1509668204.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:45.063Z,1509668205.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:45.450Z,1509668205.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:45.859Z,1509668205.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:46.259Z,1509668206.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:46.683Z,1509668206.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:47.039Z,1509668207.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:47.443Z,1509668207.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:47.844Z,1509668207.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:48.239Z,1509668208.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:48.642Z,1509668208.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:49.078Z,1509668209.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:49.453Z,1509668209.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:49.859Z,1509668209.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:50.277Z,1509668210.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:50.647Z,1509668210.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:51.047Z,1509668211.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:51.449Z,1509668211.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:51.847Z,1509668211.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:52.252Z,1509668212.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:52.650Z,1509668212.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:53.047Z,1509668213.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:53.498Z,1509668213.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:53.850Z,1509668213.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:54.274Z,1509668214.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:54.653Z,1509668214.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:55.102Z,1509668215.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:55.456Z,1509668215.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:55.886Z,1509668215.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:56.299Z,1509668216.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:56.682Z,1509668216.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:57.082Z,1509668217.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:57.447Z,1509668217.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:57.843Z,1509668217.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:58.246Z,1509668218.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:58.645Z,1509668218.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:59.055Z,1509668219.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:59.459Z,1509668219.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:16:59.855Z,1509668219.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:00.259Z,1509668220.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:00.737Z,1509668220.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:01.042Z,1509668221.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:01.443Z,1509668221.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:01.855Z,1509668221.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:02.254Z,1509668222.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:02.643Z,1509668222.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:03.059Z,1509668223.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:03.458Z,1509668223.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:03.856Z,1509668223.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:04.255Z,1509668224.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:04.662Z,1509668224.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:05.067Z,1509668225.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:05.461Z,1509668225.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:05.860Z,1509668225.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:06.254Z,1509668226.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:06.655Z,1509668226.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:07.059Z,1509668227.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:07.439Z,1509668227.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:07.840Z,1509668227.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:08.283Z,1509668228.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:11.479Z,1509668231.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:11.659Z,1509668231.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:12.033Z,1509668232.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:12.527Z,1509668232.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:12.860Z,1509668232.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:13.260Z,1509668233.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:13.673Z,1509668233.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:14.026Z,1509668234.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:14.427Z,1509668234.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:14.825Z,1509668234.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:15.229Z,1509668235.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:15.627Z,1509668235.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:16.022Z,1509668236.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:16.432Z,1509668236.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:16.839Z,1509668236.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:17.232Z,1509668237.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:17.632Z,1509668237.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:18.028Z,1509668238.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:18.420Z,1509668238.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:18.826Z,1509668238.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:19.227Z,1509668239.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:19.590Z,1509668239.590 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-03T00:17:19.643Z,1509668239.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:20.029Z,1509668240.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:20.431Z,1509668240.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:20.829Z,1509668240.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:21.231Z,1509668241.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:21.632Z,1509668241.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:22.033Z,1509668242.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:22.433Z,1509668242.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:22.829Z,1509668242.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:23.229Z,1509668243.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:23.639Z,1509668243.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:24.036Z,1509668244.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:24.488Z,1509668244.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:24.828Z,1509668244.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:25.229Z,1509668245.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:25.672Z,1509668245.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:26.024Z,1509668246.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:26.494Z,1509668246.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:26.870Z,1509668246.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:27.278Z,1509668247.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:27.629Z,1509668247.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:28.055Z,1509668248.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:28.471Z,1509668248.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:28.846Z,1509668248.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:29.229Z,1509668249.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:29.640Z,1509668249.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:30.038Z,1509668250.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:30.441Z,1509668250.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:30.839Z,1509668250.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:31.239Z,1509668251.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:31.633Z,1509668251.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:32.031Z,1509668252.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:32.436Z,1509668252.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:32.844Z,1509668252.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:33.241Z,1509668253.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:33.634Z,1509668253.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:34.029Z,1509668254.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:34.435Z,1509668254.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:34.835Z,1509668254.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:35.235Z,1509668255.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:35.641Z,1509668255.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:36.042Z,1509668256.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:36.436Z,1509668256.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:36.828Z,1509668256.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:37.228Z,1509668257.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:37.632Z,1509668257.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:38.035Z,1509668258.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:38.429Z,1509668258.429 [BPC1](ERROR): Failed to parse message.
2017-11-03T00:17:38.430Z,1509668258.430 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T00:17:38.430Z,1509668258.430 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:17:38.430Z,1509668258.430 [BPC1](ERROR): Data Fault
2017-11-03T00:17:38.438Z,1509668258.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:38.517Z,1509668258.517 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:17:38.846Z,1509668258.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:39.243Z,1509668259.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:39.640Z,1509668259.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:39.732Z,1509668259.732 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:17:39.733Z,1509668259.733 [BPC1] No Fault, FailCount= 1
2017-11-03T00:17:40.094Z,1509668260.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:40.465Z,1509668260.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:40.465Z,1509668260.465 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-11-03T00:17:40.465Z,1509668260.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:17:40.467Z,1509668260.467 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:40.467Z,1509668260.467 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2017-11-03T00:17:40.467Z,1509668260.467 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:17:40.489Z,1509668260.489 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:40.490Z,1509668260.490 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-11-03T00:17:40.490Z,1509668260.490 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:17:40.589Z,1509668260.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:17:40.589Z,1509668260.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:17:40.589Z,1509668260.589 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:17:40.921Z,1509668260.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:17:40.921Z,1509668260.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-11-03T00:17:40.922Z,1509668260.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:17:40.922Z,1509668260.922 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2017-11-03T00:17:40.922Z,1509668260.922 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:17:40.922Z,1509668260.922 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-11-03T00:17:41.256Z,1509668261.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:17:41.257Z,1509668261.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:17:41.257Z,1509668261.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:17:41.258Z,1509668261.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:17:41.259Z,1509668261.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:17:41.260Z,1509668261.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:17:41.260Z,1509668261.260 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:17:41.261Z,1509668261.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:17:41.261Z,1509668261.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:17:41.665Z,1509668261.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:42.039Z,1509668262.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:42.433Z,1509668262.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:42.825Z,1509668262.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:43.226Z,1509668263.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:43.629Z,1509668263.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:44.026Z,1509668264.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:44.308Z,1509668264.308 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:17:44.308Z,1509668264.308 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T00:17:44.308Z,1509668264.308 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:17:44.429Z,1509668264.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:17:44.430Z,1509668264.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:44.524Z,1509668264.524 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:17:44.719Z,1509668264.719 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:17:44.873Z,1509668264.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:17:44.874Z,1509668264.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:44.935Z,1509668264.935 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:17:45.238Z,1509668265.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:17:45.239Z,1509668265.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:45.626Z,1509668265.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:17:45.627Z,1509668265.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:46.025Z,1509668266.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:17:46.026Z,1509668266.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:46.427Z,1509668266.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:17:46.427Z,1509668266.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:46.517Z,1509668266.517 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:17:46.517Z,1509668266.517 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T00:17:46.553Z,1509668266.553 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:17:46.553Z,1509668266.553 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:17:46.553Z,1509668266.553 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:17:46.553Z,1509668266.553 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:17:46.825Z,1509668266.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:17:46.826Z,1509668266.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:47.227Z,1509668267.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:17:47.228Z,1509668267.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:47.646Z,1509668267.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:17:47.647Z,1509668267.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:48.043Z,1509668268.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:17:48.045Z,1509668268.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:48.439Z,1509668268.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:17:48.440Z,1509668268.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:48.827Z,1509668268.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:17:48.828Z,1509668268.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:49.227Z,1509668269.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:17:49.228Z,1509668269.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:49.631Z,1509668269.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:17:49.631Z,1509668269.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:50.029Z,1509668270.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:17:50.030Z,1509668270.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:50.439Z,1509668270.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:17:50.440Z,1509668270.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:50.674Z,1509668270.674 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:17:50.743Z,1509668270.743 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:17:50.745Z,1509668270.745 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:17:50.746Z,1509668270.746 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:17:50.746Z,1509668270.746 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:17:50.874Z,1509668270.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:17:50.875Z,1509668270.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:51.257Z,1509668271.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:51.630Z,1509668271.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:52.055Z,1509668272.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:52.419Z,1509668272.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:52.860Z,1509668272.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:53.275Z,1509668273.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:53.633Z,1509668273.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:54.061Z,1509668274.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:54.475Z,1509668274.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:54.826Z,1509668274.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:55.265Z,1509668275.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:55.663Z,1509668275.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:56.030Z,1509668276.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:56.429Z,1509668276.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:56.832Z,1509668276.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:57.265Z,1509668277.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:57.627Z,1509668277.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:58.031Z,1509668278.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:58.429Z,1509668278.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:58.835Z,1509668278.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:59.231Z,1509668279.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:17:59.633Z,1509668279.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:00.033Z,1509668280.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:00.430Z,1509668280.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:00.826Z,1509668280.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:01.229Z,1509668281.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:01.626Z,1509668281.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:02.026Z,1509668282.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:02.459Z,1509668282.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:02.836Z,1509668282.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:03.230Z,1509668283.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:03.630Z,1509668283.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:04.029Z,1509668284.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:04.427Z,1509668284.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:04.835Z,1509668284.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:05.232Z,1509668285.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:05.631Z,1509668285.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:06.032Z,1509668286.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:06.482Z,1509668286.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:06.829Z,1509668286.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:07.283Z,1509668287.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:07.685Z,1509668287.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:08.035Z,1509668288.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:08.475Z,1509668288.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:11.619Z,1509668291.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:11.819Z,1509668291.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:12.179Z,1509668292.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:12.626Z,1509668292.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:12.980Z,1509668292.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:13.389Z,1509668293.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:13.795Z,1509668293.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:14.189Z,1509668294.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:14.581Z,1509668294.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:14.976Z,1509668294.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:15.396Z,1509668295.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:15.789Z,1509668295.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:16.191Z,1509668296.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:16.586Z,1509668296.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:16.985Z,1509668296.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:17.387Z,1509668297.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:17.788Z,1509668297.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:18.187Z,1509668298.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:18.584Z,1509668298.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:18.979Z,1509668298.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:19.395Z,1509668299.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:19.793Z,1509668299.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:20.199Z,1509668300.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:20.587Z,1509668300.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:20.964Z,1509668300.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:21.392Z,1509668301.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:21.799Z,1509668301.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:22.190Z,1509668302.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:22.571Z,1509668302.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:22.968Z,1509668302.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:23.471Z,1509668303.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:23.789Z,1509668303.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:24.190Z,1509668304.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:24.568Z,1509668304.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:25.003Z,1509668305.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:25.395Z,1509668305.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:25.836Z,1509668305.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:26.197Z,1509668306.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:26.596Z,1509668306.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:27.002Z,1509668307.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:27.396Z,1509668307.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:27.796Z,1509668307.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:28.193Z,1509668308.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:28.567Z,1509668308.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:28.973Z,1509668308.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:29.376Z,1509668309.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:29.795Z,1509668309.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:30.195Z,1509668310.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:30.568Z,1509668310.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:30.967Z,1509668310.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:31.398Z,1509668311.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:31.795Z,1509668311.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:32.195Z,1509668312.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:32.567Z,1509668312.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:32.968Z,1509668312.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:33.395Z,1509668313.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:33.794Z,1509668313.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:34.203Z,1509668314.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:34.568Z,1509668314.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:34.968Z,1509668314.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:35.398Z,1509668315.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:35.792Z,1509668315.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:36.197Z,1509668316.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:36.569Z,1509668316.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:36.974Z,1509668316.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:37.455Z,1509668317.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:37.807Z,1509668317.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:38.181Z,1509668318.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:38.575Z,1509668318.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:39.022Z,1509668319.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:39.381Z,1509668319.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:39.803Z,1509668319.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:40.180Z,1509668320.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:40.607Z,1509668320.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:41.005Z,1509668321.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:41.381Z,1509668321.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:41.781Z,1509668321.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:42.176Z,1509668322.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:42.575Z,1509668322.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:42.976Z,1509668322.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:43.376Z,1509668323.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:43.780Z,1509668323.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:44.181Z,1509668324.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:44.575Z,1509668324.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:44.975Z,1509668324.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:45.377Z,1509668325.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:45.780Z,1509668325.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:46.181Z,1509668326.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:46.575Z,1509668326.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:46.974Z,1509668326.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:47.377Z,1509668327.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:47.805Z,1509668327.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:48.180Z,1509668328.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:48.575Z,1509668328.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:48.975Z,1509668328.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:49.383Z,1509668329.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:49.807Z,1509668329.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:50.181Z,1509668330.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:50.576Z,1509668330.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:50.977Z,1509668330.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:51.429Z,1509668331.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:51.829Z,1509668331.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:52.183Z,1509668332.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:52.618Z,1509668332.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:52.983Z,1509668332.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:53.383Z,1509668333.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:53.819Z,1509668333.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:54.183Z,1509668334.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:54.615Z,1509668334.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:55.014Z,1509668335.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:55.383Z,1509668335.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:55.789Z,1509668335.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:56.183Z,1509668336.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:56.578Z,1509668336.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:56.983Z,1509668336.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:57.396Z,1509668337.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:57.785Z,1509668337.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:58.183Z,1509668338.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:58.575Z,1509668338.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:58.971Z,1509668338.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:59.385Z,1509668339.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:18:59.787Z,1509668339.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:00.183Z,1509668340.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:00.575Z,1509668340.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:00.983Z,1509668340.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:01.389Z,1509668341.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:01.784Z,1509668341.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:02.183Z,1509668342.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:02.576Z,1509668342.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:02.983Z,1509668342.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:03.384Z,1509668343.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:03.785Z,1509668343.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:04.183Z,1509668344.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:04.576Z,1509668344.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:04.975Z,1509668344.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:05.470Z,1509668345.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:05.787Z,1509668345.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:06.187Z,1509668346.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:06.575Z,1509668346.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:07.023Z,1509668347.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:07.387Z,1509668347.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:07.792Z,1509668347.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:08.227Z,1509668348.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:08.579Z,1509668348.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:11.927Z,1509668351.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:12.088Z,1509668352.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:12.523Z,1509668352.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:12.885Z,1509668352.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:13.284Z,1509668353.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:13.674Z,1509668353.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:14.073Z,1509668354.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:14.484Z,1509668354.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:14.910Z,1509668354.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:15.281Z,1509668355.281 [PNI_TCM](ERROR): CRC does not match. Expected:0x52372 got:0x16841
2017-11-03T00:19:15.315Z,1509668355.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:15.691Z,1509668355.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:16.081Z,1509668356.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:16.486Z,1509668356.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:16.875Z,1509668356.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:17.295Z,1509668357.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:17.734Z,1509668357.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:18.098Z,1509668358.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:18.474Z,1509668358.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x64653 got:0x47384
2017-11-03T00:19:18.518Z,1509668358.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:18.970Z,1509668358.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:19.275Z,1509668359.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:19.687Z,1509668359.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:20.087Z,1509668360.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:20.491Z,1509668360.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:20.882Z,1509668360.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:21.291Z,1509668361.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:21.749Z,1509668361.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:22.093Z,1509668362.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:22.467Z,1509668362.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:22.894Z,1509668362.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:23.294Z,1509668363.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:23.798Z,1509668363.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:24.090Z,1509668364.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:24.527Z,1509668364.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:24.996Z,1509668364.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:25.303Z,1509668365.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:25.668Z,1509668365.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:26.110Z,1509668366.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:26.515Z,1509668366.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:26.894Z,1509668366.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:27.293Z,1509668367.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:27.693Z,1509668367.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:28.069Z,1509668368.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:28.468Z,1509668368.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:28.871Z,1509668368.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:29.298Z,1509668369.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:29.673Z,1509668369.673 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T00:19:29.693Z,1509668369.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:30.094Z,1509668370.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:30.498Z,1509668370.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:30.889Z,1509668370.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:31.303Z,1509668371.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:31.669Z,1509668371.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:32.066Z,1509668372.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:32.502Z,1509668372.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:32.895Z,1509668372.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:33.273Z,1509668373.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:33.697Z,1509668373.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:34.095Z,1509668374.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:34.466Z,1509668374.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:34.868Z,1509668374.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:35.265Z,1509668375.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:35.750Z,1509668375.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:36.094Z,1509668376.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:36.497Z,1509668376.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:36.866Z,1509668376.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:37.290Z,1509668377.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:37.739Z,1509668377.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:38.119Z,1509668378.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:38.469Z,1509668378.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x33688 got:0x33339
2017-11-03T00:19:38.519Z,1509668378.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:38.899Z,1509668378.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:39.314Z,1509668379.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:39.691Z,1509668379.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:40.057Z,1509668380.057 [PNI_TCM](ERROR): CRC does not match. Expected:0x34675 got:0x33288
2017-11-03T00:19:40.114Z,1509668380.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:40.511Z,1509668380.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:40.869Z,1509668380.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:41.271Z,1509668381.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:41.694Z,1509668381.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:42.098Z,1509668382.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:42.493Z,1509668382.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:42.887Z,1509668382.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:43.264Z,1509668383.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x59328 got:0x33311
2017-11-03T00:19:43.299Z,1509668383.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:43.693Z,1509668383.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:44.068Z,1509668384.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:44.495Z,1509668384.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:44.893Z,1509668384.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:45.302Z,1509668385.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:45.691Z,1509668385.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:46.067Z,1509668386.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:46.467Z,1509668386.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:46.837Z,1509668386.837 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:19:46.837Z,1509668386.837 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T00:19:46.837Z,1509668386.837 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:19:46.935Z,1509668386.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T00:19:46.936Z,1509668386.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:47.041Z,1509668387.041 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:19:47.241Z,1509668387.241 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:19:47.339Z,1509668387.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T00:19:47.340Z,1509668387.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:47.503Z,1509668387.503 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:19:47.686Z,1509668387.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:19:47.687Z,1509668387.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:48.009Z,1509668388.009 [CommandLine](IMPORTANT): got command failComponent
2017-11-03T00:19:48.009Z,1509668388.009 [CommandLine](IMPORTANT): Failed components:
2017-11-03T00:19:48.010Z,1509668388.010 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2017-11-03T00:19:48.010Z,1509668388.010 [CommandLine](IMPORTANT): Rowe_600LCM: Communications Fault
2017-11-03T00:19:48.120Z,1509668388.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-03T00:19:48.125Z,1509668388.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:48.539Z,1509668388.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-03T00:19:48.540Z,1509668388.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:48.902Z,1509668388.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:19:48.903Z,1509668388.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:48.985Z,1509668388.985 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:19:48.985Z,1509668388.985 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T00:19:49.117Z,1509668389.117 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:19:49.117Z,1509668389.117 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:19:49.117Z,1509668389.117 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:19:49.117Z,1509668389.117 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:19:49.261Z,1509668389.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x54814 got:0x1857
2017-11-03T00:19:49.299Z,1509668389.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:19:49.300Z,1509668389.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:49.669Z,1509668389.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:19:49.670Z,1509668389.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:50.094Z,1509668390.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:19:50.095Z,1509668390.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:50.493Z,1509668390.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:19:50.494Z,1509668390.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:50.891Z,1509668390.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:19:50.892Z,1509668390.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:51.275Z,1509668391.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:19:51.276Z,1509668391.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:51.688Z,1509668391.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:19:51.689Z,1509668391.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:52.070Z,1509668392.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:19:52.071Z,1509668392.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:52.518Z,1509668392.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T00:19:52.519Z,1509668392.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:52.874Z,1509668392.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:19:52.875Z,1509668392.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:53.295Z,1509668393.295 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:19:53.323Z,1509668393.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T00:19:53.325Z,1509668393.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:53.423Z,1509668393.423 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:19:53.424Z,1509668393.424 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:19:53.425Z,1509668393.425 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:19:53.425Z,1509668393.425 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:19:53.681Z,1509668393.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:19:53.682Z,1509668393.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:54.075Z,1509668394.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:54.475Z,1509668394.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:54.896Z,1509668394.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:55.272Z,1509668395.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:55.665Z,1509668395.665 [BPC1](ERROR): Failed to receive battery data
2017-11-03T00:19:55.665Z,1509668395.665 [BPC1] Communications Fault, FailCount= 1
2017-11-03T00:19:55.665Z,1509668395.665 [BPC1](ERROR): Communications Fault
2017-11-03T00:19:55.674Z,1509668395.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:55.802Z,1509668395.802 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T00:19:56.073Z,1509668396.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:56.503Z,1509668396.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:56.874Z,1509668396.874 [PNI_TCM](ERROR): CRC does not match. Expected:0x56914 got:0x6594
2017-11-03T00:19:56.914Z,1509668396.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:57.001Z,1509668397.001 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:19:57.001Z,1509668397.001 [BPC1] No Fault, FailCount= 1
2017-11-03T00:19:57.339Z,1509668397.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:57.673Z,1509668397.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:58.087Z,1509668398.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:58.474Z,1509668398.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:58.872Z,1509668398.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:59.273Z,1509668399.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:19:59.730Z,1509668399.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:00.074Z,1509668400.074 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T00:20:00.111Z,1509668400.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:00.487Z,1509668400.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:00.879Z,1509668400.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:01.318Z,1509668401.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:01.673Z,1509668401.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:02.073Z,1509668402.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:02.484Z,1509668402.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:02.887Z,1509668402.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:03.160Z,1509668403.160 [CommandLine](IMPORTANT): got command failComponent
2017-11-03T00:20:03.161Z,1509668403.161 [CommandLine](IMPORTANT): Failed components:
2017-11-03T00:20:03.161Z,1509668403.161 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2017-11-03T00:20:03.285Z,1509668403.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:03.672Z,1509668403.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:04.073Z,1509668404.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:04.487Z,1509668404.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:04.872Z,1509668404.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:05.294Z,1509668405.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:05.686Z,1509668405.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:06.098Z,1509668406.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:06.475Z,1509668406.475 [PNI_TCM](ERROR): CRC does not match. Expected:0x45523 got:0x14105
2017-11-03T00:20:06.495Z,1509668406.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:06.947Z,1509668406.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:07.297Z,1509668407.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:07.686Z,1509668407.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:08.077Z,1509668408.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:08.486Z,1509668408.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:08.883Z,1509668408.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:12.195Z,1509668412.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:12.371Z,1509668412.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:12.749Z,1509668412.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:13.151Z,1509668413.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:13.599Z,1509668413.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:13.978Z,1509668413.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:14.390Z,1509668414.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:14.794Z,1509668414.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:15.201Z,1509668415.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:15.544Z,1509668415.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:15.947Z,1509668415.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:16.347Z,1509668416.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:16.771Z,1509668416.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:17.227Z,1509668417.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:17.568Z,1509668417.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:17.947Z,1509668417.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:18.347Z,1509668418.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:18.742Z,1509668418.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:19.232Z,1509668419.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:19.570Z,1509668419.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:19.976Z,1509668419.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:20.368Z,1509668420.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:20.746Z,1509668420.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:21.142Z,1509668421.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:21.558Z,1509668421.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:21.562Z,1509668421.562 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T00:15:21.3Z
2017-11-03T00:20:21.562Z,1509668421.562 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T00:20:21.562Z,1509668421.562 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T00:20:21.955Z,1509668421.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:21.958Z,1509668421.958 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-03T00:20:22.456Z,1509668422.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:22.794Z,1509668422.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:26.298Z,1509668426.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:26.389Z,1509668426.389 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20171103T001125/Courier0004.lzma
2017-11-03T00:20:26.463Z,1509668426.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:26.863Z,1509668426.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:27.194Z,1509668427.194 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0004.lzma.bak
2017-11-03T00:20:27.194Z,1509668427.194 [DataOverHttps](INFO): SBD MOMSN=5182237
2017-11-03T00:20:27.249Z,1509668427.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:27.951Z,1509668427.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:28.107Z,1509668428.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:31.551Z,1509668431.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:31.743Z,1509668431.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:32.154Z,1509668432.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:32.505Z,1509668432.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:32.903Z,1509668432.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:33.317Z,1509668433.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:36.875Z,1509668436.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:36.995Z,1509668436.995 [DataOverHttps](INFO): Sending 352 bytes from file Logs/20171103T001125/Express0005.lzma
2017-11-03T00:20:37.063Z,1509668437.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:37.540Z,1509668437.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:40.065Z,1509668440.065 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0005.lzma.bak
2017-11-03T00:20:40.065Z,1509668440.065 [DataOverHttps](INFO): SBD MOMSN=5182239
2017-11-03T00:20:40.159Z,1509668440.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:40.485Z,1509668440.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:40.488Z,1509668440.488 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T00:20:40.488Z,1509668440.488 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T00:20:40.488Z,1509668440.488 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T00:20:40.726Z,1509668440.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:44.152Z,1509668444.152 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:44.153Z,1509668444.153 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-11-03T00:20:44.153Z,1509668444.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:20:44.154Z,1509668444.154 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:44.154Z,1509668444.154 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2017-11-03T00:20:44.155Z,1509668444.155 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:20:44.156Z,1509668444.156 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:44.156Z,1509668444.156 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-11-03T00:20:44.157Z,1509668444.157 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:20:44.241Z,1509668444.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:20:44.241Z,1509668444.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:20:44.241Z,1509668444.241 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:20:44.417Z,1509668444.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:20:44.417Z,1509668444.417 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-11-03T00:20:44.418Z,1509668444.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:20:44.418Z,1509668444.418 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2017-11-03T00:20:44.418Z,1509668444.418 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:20:44.418Z,1509668444.418 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-11-03T00:20:44.697Z,1509668444.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:20:44.697Z,1509668444.697 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:20:44.698Z,1509668444.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:20:44.698Z,1509668444.698 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:20:44.698Z,1509668444.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:20:44.699Z,1509668444.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:20:44.699Z,1509668444.699 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:20:44.699Z,1509668444.699 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:20:44.700Z,1509668444.700 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:20:45.176Z,1509668445.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:45.503Z,1509668445.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:45.938Z,1509668445.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:46.337Z,1509668446.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:46.707Z,1509668446.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:47.104Z,1509668447.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:47.515Z,1509668447.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:47.903Z,1509668447.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:48.303Z,1509668448.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:48.703Z,1509668448.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:49.111Z,1509668449.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:49.511Z,1509668449.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:49.915Z,1509668449.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:50.319Z,1509668450.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:50.725Z,1509668450.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:51.154Z,1509668451.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:51.520Z,1509668451.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:51.918Z,1509668451.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:52.331Z,1509668452.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:52.727Z,1509668452.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:53.120Z,1509668453.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:53.543Z,1509668453.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:53.907Z,1509668453.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:54.311Z,1509668454.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:54.707Z,1509668454.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:55.134Z,1509668455.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:55.535Z,1509668455.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:55.953Z,1509668455.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:56.306Z,1509668456.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:56.763Z,1509668456.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:57.186Z,1509668457.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:57.553Z,1509668457.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:57.904Z,1509668457.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:58.331Z,1509668458.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:58.715Z,1509668458.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:59.175Z,1509668459.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:59.557Z,1509668459.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:20:59.908Z,1509668459.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:00.323Z,1509668460.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:00.731Z,1509668460.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:01.110Z,1509668461.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:01.513Z,1509668461.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:01.913Z,1509668461.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:02.313Z,1509668462.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:02.691Z,1509668462.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:03.114Z,1509668463.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:03.496Z,1509668463.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:03.898Z,1509668463.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:04.301Z,1509668464.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:04.706Z,1509668464.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:05.104Z,1509668465.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:05.508Z,1509668465.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:05.910Z,1509668465.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:06.300Z,1509668466.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:06.707Z,1509668466.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:07.102Z,1509668467.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:07.505Z,1509668467.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:07.904Z,1509668467.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:08.305Z,1509668468.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:08.703Z,1509668468.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:09.099Z,1509668469.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:09.499Z,1509668469.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:09.908Z,1509668469.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:10.301Z,1509668470.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:10.706Z,1509668470.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:11.098Z,1509668471.098 [BPC1](ERROR): Failed to parse message.
2017-11-03T00:21:11.098Z,1509668471.098 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T00:21:11.098Z,1509668471.098 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:21:11.129Z,1509668471.129 [BPC1](ERROR): Data Fault
2017-11-03T00:21:11.177Z,1509668471.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:11.281Z,1509668471.281 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:21:11.511Z,1509668471.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:11.903Z,1509668471.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:12.300Z,1509668472.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:12.389Z,1509668472.389 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:21:12.389Z,1509668472.389 [BPC1] No Fault, FailCount= 1
2017-11-03T00:21:12.747Z,1509668472.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:13.162Z,1509668473.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:13.558Z,1509668473.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:13.919Z,1509668473.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:14.319Z,1509668474.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:14.707Z,1509668474.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:15.102Z,1509668475.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:15.495Z,1509668475.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:15.894Z,1509668475.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:16.290Z,1509668476.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:16.714Z,1509668476.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:17.115Z,1509668477.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:17.511Z,1509668477.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:17.891Z,1509668477.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:18.291Z,1509668478.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:18.691Z,1509668478.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:19.091Z,1509668479.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:19.523Z,1509668479.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:19.900Z,1509668479.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:20.307Z,1509668480.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:20.699Z,1509668480.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:21.098Z,1509668481.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:21.488Z,1509668481.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:21.899Z,1509668481.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:22.352Z,1509668482.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:22.705Z,1509668482.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:23.104Z,1509668483.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:23.504Z,1509668483.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:23.891Z,1509668483.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:24.318Z,1509668484.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:24.693Z,1509668484.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:25.094Z,1509668485.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:25.505Z,1509668485.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:25.934Z,1509668485.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:26.305Z,1509668486.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:26.726Z,1509668486.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:27.091Z,1509668487.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:27.562Z,1509668487.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:27.923Z,1509668487.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:28.291Z,1509668488.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:28.705Z,1509668488.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:29.104Z,1509668489.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:29.504Z,1509668489.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:29.891Z,1509668489.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:30.321Z,1509668490.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:30.703Z,1509668490.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:31.119Z,1509668491.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:31.507Z,1509668491.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:31.930Z,1509668491.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:32.311Z,1509668492.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:32.707Z,1509668492.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:33.101Z,1509668493.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:33.508Z,1509668493.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:33.901Z,1509668493.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:34.300Z,1509668494.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:34.715Z,1509668494.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:35.115Z,1509668495.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:35.515Z,1509668495.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:35.899Z,1509668495.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:36.303Z,1509668496.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:36.702Z,1509668496.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:37.103Z,1509668497.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:37.189Z,1509668497.189 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T00:21:37.515Z,1509668497.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:37.914Z,1509668497.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:38.354Z,1509668498.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:38.707Z,1509668498.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:39.170Z,1509668499.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:39.499Z,1509668499.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:39.925Z,1509668499.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:40.323Z,1509668500.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:40.719Z,1509668500.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:41.196Z,1509668501.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:44.300Z,1509668504.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:44.503Z,1509668504.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:44.850Z,1509668504.850 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-11-03T00:21:44.875Z,1509668504.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:45.319Z,1509668505.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:45.655Z,1509668505.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:46.052Z,1509668506.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:46.467Z,1509668506.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:46.891Z,1509668506.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:47.268Z,1509668507.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:47.666Z,1509668507.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:48.057Z,1509668508.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:48.452Z,1509668508.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:48.951Z,1509668508.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:49.270Z,1509668509.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:49.721Z,1509668509.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:49.808Z,1509668509.808 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:21:49.808Z,1509668509.808 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T00:21:49.808Z,1509668509.808 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:21:49.829Z,1509668509.829 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:21:49.829Z,1509668509.829 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T00:21:50.091Z,1509668510.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:21:50.093Z,1509668510.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:50.212Z,1509668510.212 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:21:50.238Z,1509668510.238 [CommandLine](IMPORTANT): got command failComponent
2017-11-03T00:21:50.238Z,1509668510.238 [CommandLine](IMPORTANT): Failed components:
2017-11-03T00:21:50.239Z,1509668510.239 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2017-11-03T00:21:50.239Z,1509668510.239 [CommandLine](IMPORTANT): Rowe_600LCM: Communications Fault
2017-11-03T00:21:50.353Z,1509668510.353 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:21:50.478Z,1509668510.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:21:50.479Z,1509668510.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:50.864Z,1509668510.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-03T00:21:50.865Z,1509668510.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:51.239Z,1509668511.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-03T00:21:51.241Z,1509668511.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:51.643Z,1509668511.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-03T00:21:51.652Z,1509668511.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:52.043Z,1509668512.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T00:21:52.044Z,1509668512.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:52.473Z,1509668512.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:21:52.474Z,1509668512.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:52.883Z,1509668512.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:21:52.884Z,1509668512.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:53.278Z,1509668513.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:21:53.279Z,1509668513.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:53.641Z,1509668513.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T00:21:53.642Z,1509668513.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:54.044Z,1509668514.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T00:21:54.045Z,1509668514.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:54.467Z,1509668514.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:21:54.468Z,1509668514.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:54.843Z,1509668514.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T00:21:54.844Z,1509668514.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:55.243Z,1509668515.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T00:21:55.244Z,1509668515.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:55.678Z,1509668515.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:21:55.679Z,1509668515.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:56.064Z,1509668516.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:21:56.094Z,1509668516.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:21:56.095Z,1509668516.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:56.446Z,1509668516.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:21:56.494Z,1509668516.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:21:56.495Z,1509668516.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:56.832Z,1509668516.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:21:56.847Z,1509668516.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T00:21:56.848Z,1509668516.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:57.277Z,1509668517.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-03T00:21:57.278Z,1509668517.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:57.695Z,1509668517.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:21:57.696Z,1509668517.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:58.081Z,1509668518.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:21:58.081Z,1509668518.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:58.490Z,1509668518.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:21:58.491Z,1509668518.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:58.882Z,1509668518.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:21:58.883Z,1509668518.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:59.316Z,1509668519.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:21:59.317Z,1509668519.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:21:59.685Z,1509668519.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:21:59.686Z,1509668519.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:00.098Z,1509668520.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:22:00.099Z,1509668520.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:00.447Z,1509668520.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-03T00:22:00.448Z,1509668520.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:00.847Z,1509668520.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T00:22:00.849Z,1509668520.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:01.243Z,1509668521.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T00:22:01.244Z,1509668521.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:01.681Z,1509668521.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-03T00:22:01.682Z,1509668521.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:02.061Z,1509668522.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-03T00:22:02.062Z,1509668522.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:02.456Z,1509668522.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-03T00:22:02.457Z,1509668522.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:02.849Z,1509668522.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-03T00:22:02.850Z,1509668522.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:03.246Z,1509668523.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-03T00:22:03.247Z,1509668523.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:03.653Z,1509668523.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-03T00:22:03.655Z,1509668523.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:04.054Z,1509668524.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-03T00:22:04.055Z,1509668524.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:04.457Z,1509668524.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-03T00:22:04.458Z,1509668524.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:04.882Z,1509668524.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:22:04.883Z,1509668524.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:05.264Z,1509668525.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T00:22:05.282Z,1509668525.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:05.653Z,1509668525.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-03T00:22:05.654Z,1509668525.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:06.050Z,1509668526.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-03T00:22:06.051Z,1509668526.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:06.449Z,1509668526.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-03T00:22:06.450Z,1509668526.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:06.851Z,1509668526.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T00:22:06.853Z,1509668526.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:07.255Z,1509668527.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T00:22:07.257Z,1509668527.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:07.663Z,1509668527.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T00:22:07.664Z,1509668527.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:08.060Z,1509668528.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-03T00:22:08.062Z,1509668528.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:08.461Z,1509668528.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-03T00:22:08.462Z,1509668528.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:08.857Z,1509668528.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T00:22:08.858Z,1509668528.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:09.258Z,1509668529.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-03T00:22:09.259Z,1509668529.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:09.651Z,1509668529.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-03T00:22:09.652Z,1509668529.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:10.053Z,1509668530.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:10.460Z,1509668530.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:10.881Z,1509668530.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:11.302Z,1509668531.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:11.656Z,1509668531.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:12.101Z,1509668532.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:12.451Z,1509668532.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:12.880Z,1509668532.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:13.261Z,1509668533.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:13.691Z,1509668533.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:14.099Z,1509668534.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:14.481Z,1509668534.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:14.857Z,1509668534.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:15.257Z,1509668535.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:15.647Z,1509668535.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:16.050Z,1509668536.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:16.461Z,1509668536.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:16.804Z,1509668536.804 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T00:22:16.804Z,1509668536.804 [NAL9602] Data Fault, FailCount= 1
2017-11-03T00:22:16.804Z,1509668536.804 [NAL9602](ERROR): Data Fault
2017-11-03T00:22:16.860Z,1509668536.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:16.949Z,1509668536.949 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T00:22:17.214Z,1509668537.214 [NAL9602](INFO): Powering down
2017-11-03T00:22:17.282Z,1509668537.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:17.614Z,1509668537.614 [NAL9602](FAULT): LCB fault:  Software Overcurrent.
2017-11-03T00:22:17.614Z,1509668537.614 [NAL9602] Hardware Fault, FailCount= 1
2017-11-03T00:22:17.614Z,1509668537.614 [NAL9602](ERROR): Hardware Fault
2017-11-03T00:22:17.664Z,1509668537.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:18.055Z,1509668538.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:18.153Z,1509668538.153 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T00:22:18.153Z,1509668538.153 [NAL9602] No Fault, FailCount= 1
2017-11-03T00:22:18.456Z,1509668538.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:18.854Z,1509668538.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:19.299Z,1509668539.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:19.652Z,1509668539.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:20.055Z,1509668540.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:20.446Z,1509668540.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:20.855Z,1509668540.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:21.259Z,1509668541.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:21.656Z,1509668541.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:22.055Z,1509668542.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:22.453Z,1509668542.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:22.856Z,1509668542.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:23.255Z,1509668543.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:23.655Z,1509668543.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:24.053Z,1509668544.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:24.453Z,1509668544.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:24.851Z,1509668544.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:25.249Z,1509668545.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:25.651Z,1509668545.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:26.100Z,1509668546.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:26.454Z,1509668546.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:26.894Z,1509668546.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:27.252Z,1509668547.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:27.677Z,1509668547.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:28.099Z,1509668548.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:28.463Z,1509668548.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:28.845Z,1509668548.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:29.261Z,1509668549.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:29.662Z,1509668549.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:30.088Z,1509668550.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:30.450Z,1509668550.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:30.845Z,1509668550.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:31.254Z,1509668551.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:31.652Z,1509668551.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:32.052Z,1509668552.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:32.445Z,1509668552.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:32.863Z,1509668552.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:33.255Z,1509668553.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:33.643Z,1509668553.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:34.061Z,1509668554.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:34.462Z,1509668554.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:34.889Z,1509668554.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:35.253Z,1509668555.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:35.649Z,1509668555.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:36.068Z,1509668556.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:36.472Z,1509668556.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:36.846Z,1509668556.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:37.257Z,1509668557.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:37.655Z,1509668557.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:38.053Z,1509668558.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:38.455Z,1509668558.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:38.854Z,1509668558.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:39.262Z,1509668559.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:39.652Z,1509668559.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:40.140Z,1509668560.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:40.466Z,1509668560.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:40.864Z,1509668560.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:41.295Z,1509668561.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:44.411Z,1509668564.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:44.563Z,1509668564.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:44.967Z,1509668564.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:45.337Z,1509668565.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:45.799Z,1509668565.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:46.178Z,1509668566.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:46.542Z,1509668566.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:46.942Z,1509668566.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:47.310Z,1509668567.310 [NAL9602](INFO): Powering up NAL9602
2017-11-03T00:22:47.344Z,1509668567.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:47.741Z,1509668567.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:48.138Z,1509668568.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:48.542Z,1509668568.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:48.938Z,1509668568.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:49.338Z,1509668569.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:49.747Z,1509668569.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:50.141Z,1509668570.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:50.537Z,1509668570.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:50.942Z,1509668570.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:51.337Z,1509668571.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:51.741Z,1509668571.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:52.142Z,1509668572.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:52.546Z,1509668572.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:52.942Z,1509668572.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:53.341Z,1509668573.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:53.742Z,1509668573.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:54.142Z,1509668574.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:54.546Z,1509668574.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:54.941Z,1509668574.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:55.345Z,1509668575.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:55.741Z,1509668575.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:56.128Z,1509668576.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:56.143Z,1509668576.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:56.527Z,1509668576.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:56.616Z,1509668576.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:56.928Z,1509668576.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:56.983Z,1509668576.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:57.324Z,1509668577.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:57.339Z,1509668577.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:57.792Z,1509668577.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:57.807Z,1509668577.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:58.141Z,1509668578.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:58.194Z,1509668578.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:58.572Z,1509668578.572 [NAL9602](INFO): NAL9602 initialized
2017-11-03T00:22:58.590Z,1509668578.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:58.605Z,1509668578.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:58.925Z,1509668578.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:58.980Z,1509668578.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:59.342Z,1509668579.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:22:59.390Z,1509668579.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:22:59.759Z,1509668579.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:00.211Z,1509668580.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:00.546Z,1509668580.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:00.995Z,1509668580.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:01.015Z,1509668581.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:01.397Z,1509668581.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:01.412Z,1509668581.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:01.731Z,1509668581.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:01.747Z,1509668581.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:02.209Z,1509668582.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:02.239Z,1509668582.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:02.641Z,1509668582.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:02.656Z,1509668582.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:03.017Z,1509668583.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:03.047Z,1509668583.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:03.330Z,1509668583.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:03.345Z,1509668583.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:03.719Z,1509668583.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:03.750Z,1509668583.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:04.124Z,1509668584.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:04.149Z,1509668584.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:04.523Z,1509668584.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:04.548Z,1509668584.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:04.938Z,1509668584.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:04.953Z,1509668584.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:05.342Z,1509668585.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:05.362Z,1509668585.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:05.742Z,1509668585.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:05.763Z,1509668585.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:06.123Z,1509668586.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:06.149Z,1509668586.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:06.520Z,1509668586.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:06.554Z,1509668586.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:06.948Z,1509668586.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:07.418Z,1509668587.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:07.736Z,1509668587.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:08.163Z,1509668588.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:08.563Z,1509668588.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:08.964Z,1509668588.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:09.415Z,1509668589.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:09.814Z,1509668589.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:10.136Z,1509668590.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:10.599Z,1509668590.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:10.615Z,1509668590.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:10.930Z,1509668590.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:10.962Z,1509668590.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:11.418Z,1509668591.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:23:11.507Z,1509668591.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:11.845Z,1509668591.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:12.261Z,1509668592.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:12.534Z,1509668592.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:13.083Z,1509668593.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:13.427Z,1509668593.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:13.861Z,1509668593.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:14.168Z,1509668594.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:14.639Z,1509668594.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:14.986Z,1509668594.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:15.335Z,1509668595.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:15.827Z,1509668595.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:16.135Z,1509668596.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:16.635Z,1509668596.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:16.969Z,1509668596.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:17.426Z,1509668597.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:17.771Z,1509668597.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:18.143Z,1509668598.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:18.618Z,1509668598.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:18.940Z,1509668598.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:19.427Z,1509668599.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:19.828Z,1509668599.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:20.168Z,1509668600.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:20.638Z,1509668600.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:21.042Z,1509668601.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:21.340Z,1509668601.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:21.827Z,1509668601.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:22.243Z,1509668602.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:22.631Z,1509668602.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:23.069Z,1509668603.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:23.368Z,1509668603.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:23.770Z,1509668603.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:24.143Z,1509668604.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:24.543Z,1509668604.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:24.944Z,1509668604.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:25.344Z,1509668605.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:25.800Z,1509668605.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:26.152Z,1509668606.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:26.583Z,1509668606.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:26.953Z,1509668606.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:27.382Z,1509668607.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:27.782Z,1509668607.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:28.144Z,1509668608.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:28.612Z,1509668608.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:29.050Z,1509668609.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:29.359Z,1509668609.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:29.832Z,1509668609.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:30.212Z,1509668610.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:30.551Z,1509668610.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:30.951Z,1509668610.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:31.430Z,1509668611.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:31.744Z,1509668611.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:32.239Z,1509668612.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:32.551Z,1509668612.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:32.959Z,1509668612.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:33.437Z,1509668613.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:33.744Z,1509668613.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:34.229Z,1509668614.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:34.541Z,1509668614.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:34.979Z,1509668614.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:35.355Z,1509668615.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:35.787Z,1509668615.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:36.144Z,1509668616.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:36.630Z,1509668616.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:36.945Z,1509668616.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:37.412Z,1509668617.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:37.746Z,1509668617.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:38.237Z,1509668618.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:38.559Z,1509668618.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:38.956Z,1509668618.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:39.351Z,1509668619.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:39.803Z,1509668619.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:40.159Z,1509668620.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:40.554Z,1509668620.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:41.001Z,1509668621.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:41.431Z,1509668621.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:44.511Z,1509668624.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:44.683Z,1509668624.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:45.106Z,1509668625.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:45.106Z,1509668625.106 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-11-03T00:23:45.106Z,1509668625.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:23:45.108Z,1509668625.108 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:45.108Z,1509668625.108 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2017-11-03T00:23:45.108Z,1509668625.108 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:23:45.110Z,1509668625.110 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:45.110Z,1509668625.110 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-11-03T00:23:45.110Z,1509668625.110 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:23:45.208Z,1509668625.208 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:23:45.209Z,1509668625.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:23:45.209Z,1509668625.209 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:23:45.553Z,1509668625.553 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:23:45.553Z,1509668625.553 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-11-03T00:23:45.554Z,1509668625.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:23:45.554Z,1509668625.554 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2017-11-03T00:23:45.554Z,1509668625.554 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:23:45.554Z,1509668625.554 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-11-03T00:23:45.867Z,1509668625.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:23:45.867Z,1509668625.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:23:45.868Z,1509668625.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:23:45.868Z,1509668625.868 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:23:45.869Z,1509668625.869 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:23:45.869Z,1509668625.869 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:23:45.869Z,1509668625.869 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:23:45.870Z,1509668625.870 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:23:45.870Z,1509668625.870 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:23:46.272Z,1509668626.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:23:46.273Z,1509668626.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:46.679Z,1509668626.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:23:46.680Z,1509668626.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:47.076Z,1509668627.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:23:47.077Z,1509668627.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:47.474Z,1509668627.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:23:47.475Z,1509668627.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:47.868Z,1509668627.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:23:47.869Z,1509668627.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:48.265Z,1509668628.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:23:48.266Z,1509668628.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:48.667Z,1509668628.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:23:48.668Z,1509668628.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:49.072Z,1509668629.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:23:49.073Z,1509668629.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:49.479Z,1509668629.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:23:49.481Z,1509668629.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:49.879Z,1509668629.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:23:49.880Z,1509668629.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:50.264Z,1509668630.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:23:50.265Z,1509668630.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:50.663Z,1509668630.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:23:50.664Z,1509668630.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:51.066Z,1509668631.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:23:51.067Z,1509668631.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:51.463Z,1509668631.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:23:51.464Z,1509668631.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:51.863Z,1509668631.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:23:51.864Z,1509668631.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:52.277Z,1509668632.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:23:52.278Z,1509668632.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:52.679Z,1509668632.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T00:23:52.680Z,1509668632.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:53.082Z,1509668633.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:23:53.083Z,1509668633.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:53.464Z,1509668633.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:23:53.465Z,1509668633.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:53.874Z,1509668633.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:23:53.875Z,1509668633.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:54.264Z,1509668634.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:23:54.265Z,1509668634.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:54.664Z,1509668634.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:23:54.665Z,1509668634.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:55.075Z,1509668635.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:23:55.076Z,1509668635.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:55.474Z,1509668635.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:23:55.475Z,1509668635.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:55.882Z,1509668635.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T00:23:55.883Z,1509668635.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:56.274Z,1509668636.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T00:23:56.275Z,1509668636.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:56.670Z,1509668636.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T00:23:56.671Z,1509668636.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:57.154Z,1509668637.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T00:23:57.155Z,1509668637.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:57.463Z,1509668637.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T00:23:57.464Z,1509668637.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:57.910Z,1509668637.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T00:23:57.911Z,1509668637.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:58.268Z,1509668638.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T00:23:58.269Z,1509668638.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:58.694Z,1509668638.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T00:23:58.695Z,1509668638.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:59.109Z,1509668639.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T00:23:59.110Z,1509668639.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:59.462Z,1509668639.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T00:23:59.463Z,1509668639.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:23:59.862Z,1509668639.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T00:23:59.863Z,1509668639.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:00.263Z,1509668640.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:24:00.264Z,1509668640.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:00.663Z,1509668640.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T00:24:00.664Z,1509668640.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:01.089Z,1509668641.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T00:24:01.090Z,1509668641.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:01.467Z,1509668641.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T00:24:01.469Z,1509668641.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:01.864Z,1509668641.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T00:24:01.865Z,1509668641.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:02.259Z,1509668642.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T00:24:02.260Z,1509668642.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:02.666Z,1509668642.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T00:24:02.667Z,1509668642.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:03.062Z,1509668643.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T00:24:03.063Z,1509668643.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:03.459Z,1509668643.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T00:24:03.460Z,1509668643.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:03.862Z,1509668643.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T00:24:03.863Z,1509668643.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:04.274Z,1509668644.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T00:24:04.275Z,1509668644.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:04.664Z,1509668644.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T00:24:04.665Z,1509668644.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:05.092Z,1509668645.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T00:24:05.093Z,1509668645.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:05.467Z,1509668645.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:05.862Z,1509668645.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:06.263Z,1509668646.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:06.667Z,1509668646.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:07.092Z,1509668647.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:07.468Z,1509668647.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:07.863Z,1509668647.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:08.271Z,1509668648.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:08.667Z,1509668648.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:09.063Z,1509668649.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:09.462Z,1509668649.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:09.867Z,1509668649.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:10.269Z,1509668650.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:10.669Z,1509668650.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:11.114Z,1509668651.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:11.514Z,1509668651.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:11.863Z,1509668651.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:12.260Z,1509668652.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:12.702Z,1509668652.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:13.073Z,1509668653.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:13.503Z,1509668653.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:13.872Z,1509668653.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:14.299Z,1509668654.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:14.665Z,1509668654.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:15.064Z,1509668655.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:15.467Z,1509668655.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:15.865Z,1509668655.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:16.271Z,1509668656.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:16.673Z,1509668656.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:17.070Z,1509668657.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:17.463Z,1509668657.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:17.871Z,1509668657.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:18.265Z,1509668658.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:18.663Z,1509668658.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:19.075Z,1509668659.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:19.470Z,1509668659.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:19.871Z,1509668659.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:20.263Z,1509668660.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:20.659Z,1509668660.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:21.064Z,1509668661.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:21.467Z,1509668661.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:21.865Z,1509668661.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:22.271Z,1509668662.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:22.672Z,1509668662.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:23.071Z,1509668663.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:23.471Z,1509668663.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:23.871Z,1509668663.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:24.262Z,1509668664.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:24.664Z,1509668664.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:25.072Z,1509668665.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:25.472Z,1509668665.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:25.918Z,1509668665.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:26.307Z,1509668666.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:26.660Z,1509668666.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:27.102Z,1509668667.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:27.471Z,1509668667.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:27.903Z,1509668667.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:28.314Z,1509668668.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:28.672Z,1509668668.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:29.076Z,1509668669.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:29.463Z,1509668669.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:29.867Z,1509668669.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:30.265Z,1509668670.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:30.665Z,1509668670.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:30.709Z,1509668670.709 [CommandLine](IMPORTANT): got command failComponent
2017-11-03T00:24:30.709Z,1509668670.709 [CommandLine](IMPORTANT): Failed components:
2017-11-03T00:24:30.710Z,1509668670.710 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2017-11-03T00:24:30.710Z,1509668670.710 [CommandLine](IMPORTANT): Rowe_600LCM: Communications Fault
2017-11-03T00:24:31.075Z,1509668671.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:31.479Z,1509668671.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:31.876Z,1509668671.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:32.267Z,1509668672.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:32.315Z,1509668672.315 [CommandLine](IMPORTANT): got command failComponent
2017-11-03T00:24:32.316Z,1509668672.316 [CommandLine](IMPORTANT): Failed components:
2017-11-03T00:24:32.316Z,1509668672.316 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2017-11-03T00:24:32.316Z,1509668672.316 [CommandLine](IMPORTANT): Rowe_600LCM: Communications Fault
2017-11-03T00:24:32.658Z,1509668672.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:33.083Z,1509668673.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:33.455Z,1509668673.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:33.854Z,1509668673.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:34.283Z,1509668674.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:34.682Z,1509668674.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:35.080Z,1509668675.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:35.489Z,1509668675.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:35.867Z,1509668675.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:36.255Z,1509668676.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:36.667Z,1509668676.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:37.085Z,1509668677.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:37.468Z,1509668677.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:37.888Z,1509668677.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:38.267Z,1509668678.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:38.655Z,1509668678.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:39.059Z,1509668679.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:39.486Z,1509668679.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:39.858Z,1509668679.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:40.319Z,1509668680.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:40.715Z,1509668680.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:41.085Z,1509668681.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:41.503Z,1509668681.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:44.560Z,1509668684.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:44.758Z,1509668684.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:45.159Z,1509668685.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:45.539Z,1509668685.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:45.939Z,1509668685.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:46.319Z,1509668686.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:46.707Z,1509668686.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:47.114Z,1509668687.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:47.511Z,1509668687.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:47.937Z,1509668687.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:48.337Z,1509668688.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:48.740Z,1509668688.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:49.119Z,1509668689.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:49.510Z,1509668689.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:49.939Z,1509668689.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:50.316Z,1509668690.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:50.716Z,1509668690.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:51.111Z,1509668691.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:51.510Z,1509668691.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:51.941Z,1509668691.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:52.341Z,1509668692.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:52.717Z,1509668692.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:53.116Z,1509668693.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:53.515Z,1509668693.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:53.942Z,1509668693.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:54.340Z,1509668694.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:54.721Z,1509668694.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:55.115Z,1509668695.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:55.513Z,1509668695.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:55.921Z,1509668695.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:56.342Z,1509668696.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:56.723Z,1509668696.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:57.178Z,1509668697.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:57.511Z,1509668697.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:57.955Z,1509668697.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:58.324Z,1509668698.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:58.755Z,1509668698.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:59.118Z,1509668699.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:59.551Z,1509668699.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:24:59.926Z,1509668699.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:00.325Z,1509668700.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:00.727Z,1509668700.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:01.118Z,1509668701.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:01.511Z,1509668701.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:01.926Z,1509668701.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:02.327Z,1509668702.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:02.722Z,1509668702.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:03.122Z,1509668703.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:03.511Z,1509668703.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:03.923Z,1509668703.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:04.326Z,1509668704.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:04.727Z,1509668704.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:05.117Z,1509668705.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:05.515Z,1509668705.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:05.927Z,1509668705.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:06.323Z,1509668706.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:06.726Z,1509668706.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:07.115Z,1509668707.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:07.517Z,1509668707.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:07.923Z,1509668707.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:08.323Z,1509668708.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:08.723Z,1509668708.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:09.119Z,1509668709.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:09.523Z,1509668709.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:09.923Z,1509668709.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:10.326Z,1509668710.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:10.724Z,1509668710.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:11.118Z,1509668711.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:11.589Z,1509668711.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:11.929Z,1509668711.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:12.363Z,1509668712.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:12.735Z,1509668712.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:13.154Z,1509668713.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:13.518Z,1509668713.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:13.975Z,1509668713.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:14.328Z,1509668714.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:14.727Z,1509668714.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:15.117Z,1509668715.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:15.517Z,1509668715.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:15.927Z,1509668715.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:16.328Z,1509668716.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:16.728Z,1509668716.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:17.118Z,1509668717.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:17.522Z,1509668717.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:17.928Z,1509668717.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:18.331Z,1509668718.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:18.734Z,1509668718.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:19.123Z,1509668719.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:19.519Z,1509668719.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:19.929Z,1509668719.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:20.328Z,1509668720.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:20.720Z,1509668720.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:21.126Z,1509668721.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:21.527Z,1509668721.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:21.930Z,1509668721.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:22.327Z,1509668722.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:22.731Z,1509668722.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:23.126Z,1509668723.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:23.527Z,1509668723.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:23.929Z,1509668723.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:24.339Z,1509668724.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:24.734Z,1509668724.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:25.128Z,1509668725.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:25.555Z,1509668725.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:25.947Z,1509668725.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:26.332Z,1509668726.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:26.751Z,1509668726.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:27.110Z,1509668727.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:27.542Z,1509668727.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:27.951Z,1509668727.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:28.343Z,1509668728.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:28.731Z,1509668728.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:29.107Z,1509668729.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:29.534Z,1509668729.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:29.930Z,1509668729.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:30.328Z,1509668730.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:30.733Z,1509668730.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:31.107Z,1509668731.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:31.506Z,1509668731.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:31.934Z,1509668731.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:32.336Z,1509668732.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:32.732Z,1509668732.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:33.111Z,1509668733.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:33.507Z,1509668733.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:33.933Z,1509668733.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:34.335Z,1509668734.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:34.736Z,1509668734.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:35.107Z,1509668735.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:35.511Z,1509668735.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:35.935Z,1509668735.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:36.333Z,1509668736.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:36.738Z,1509668736.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:37.137Z,1509668737.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:37.515Z,1509668737.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:37.935Z,1509668737.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:38.336Z,1509668738.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:38.735Z,1509668738.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:39.138Z,1509668739.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:39.507Z,1509668739.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:39.959Z,1509668739.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:40.352Z,1509668740.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:40.713Z,1509668740.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:41.158Z,1509668741.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:41.161Z,1509668741.161 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T00:25:41.161Z,1509668741.161 [Default:CheckIn:C.Wait] Stopped
2017-11-03T00:25:41.162Z,1509668741.162 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T00:25:41.162Z,1509668741.162 [Default:CheckIn:D] Running Loop=1
2017-11-03T00:25:41.513Z,1509668741.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:41.542Z,1509668741.542 [Default:CheckIn:D] Stopped
2017-11-03T00:25:41.542Z,1509668741.542 [Default:CheckIn:E] Running Loop=1
2017-11-03T00:25:44.639Z,1509668744.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:44.642Z,1509668744.642 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.565830 min 
2017-11-03T00:25:44.644Z,1509668744.644 [Default:CheckIn:E] Stopped
2017-11-03T00:25:44.644Z,1509668744.644 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T00:25:44.644Z,1509668744.644 [Default:CheckIn] Stopped
2017-11-03T00:25:44.645Z,1509668744.645 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T00:25:44.645Z,1509668744.645 [Default:CheckIn](INFO): Running loop #2
2017-11-03T00:25:44.645Z,1509668744.645 [Default:CheckIn] Running Loop=2
2017-11-03T00:25:44.645Z,1509668744.645 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T00:25:44.645Z,1509668744.645 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T00:25:44.833Z,1509668744.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:45.242Z,1509668745.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:45.603Z,1509668745.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:45.994Z,1509668745.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:46.397Z,1509668746.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:46.803Z,1509668746.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:47.203Z,1509668747.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:47.615Z,1509668747.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:48.003Z,1509668748.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:48.392Z,1509668748.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:48.798Z,1509668748.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:49.196Z,1509668749.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:49.594Z,1509668749.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:50.003Z,1509668750.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:50.401Z,1509668750.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:50.804Z,1509668750.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:51.198Z,1509668751.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:51.593Z,1509668751.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:51.995Z,1509668751.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:52.396Z,1509668752.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:52.811Z,1509668752.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:53.205Z,1509668753.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:53.611Z,1509668753.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:54.011Z,1509668754.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:54.380Z,1509668754.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:54.802Z,1509668754.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:55.202Z,1509668755.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:55.596Z,1509668755.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:56.010Z,1509668756.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:56.419Z,1509668756.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:56.907Z,1509668756.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:57.223Z,1509668757.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:57.616Z,1509668757.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:58.014Z,1509668758.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:58.470Z,1509668758.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:58.817Z,1509668758.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:59.261Z,1509668759.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:25:59.672Z,1509668759.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:00.031Z,1509668760.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:00.389Z,1509668760.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:00.820Z,1509668760.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:01.217Z,1509668761.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:01.591Z,1509668761.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:02.074Z,1509668762.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:02.465Z,1509668762.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:02.827Z,1509668762.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:03.235Z,1509668763.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:03.596Z,1509668763.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:04.019Z,1509668764.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:04.412Z,1509668764.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:04.817Z,1509668764.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:05.211Z,1509668765.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:05.605Z,1509668765.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:06.004Z,1509668766.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:06.400Z,1509668766.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:06.799Z,1509668766.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:07.202Z,1509668767.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:07.583Z,1509668767.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:08.010Z,1509668768.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:08.407Z,1509668768.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:08.806Z,1509668768.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:09.211Z,1509668769.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:09.584Z,1509668769.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:09.990Z,1509668769.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:10.384Z,1509668770.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:10.783Z,1509668770.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:11.208Z,1509668771.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:11.702Z,1509668771.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:12.011Z,1509668772.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:12.411Z,1509668772.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:12.827Z,1509668772.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:13.187Z,1509668773.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:13.631Z,1509668773.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:14.043Z,1509668774.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:14.412Z,1509668774.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:14.808Z,1509668774.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:15.186Z,1509668775.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:15.587Z,1509668775.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:16.011Z,1509668776.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:16.411Z,1509668776.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:16.815Z,1509668776.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:17.214Z,1509668777.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:17.614Z,1509668777.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:18.016Z,1509668778.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:18.391Z,1509668778.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:18.787Z,1509668778.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:19.187Z,1509668779.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:19.583Z,1509668779.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:20.015Z,1509668780.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:20.412Z,1509668780.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:20.813Z,1509668780.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:21.195Z,1509668781.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:21.592Z,1509668781.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:21.991Z,1509668781.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:22.391Z,1509668782.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:22.787Z,1509668782.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:23.213Z,1509668783.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:23.616Z,1509668783.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:24.014Z,1509668784.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:24.386Z,1509668784.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:24.791Z,1509668784.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:25.187Z,1509668785.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:25.586Z,1509668785.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:26.039Z,1509668786.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:26.438Z,1509668786.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:26.792Z,1509668786.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:27.223Z,1509668787.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:27.595Z,1509668787.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:28.027Z,1509668788.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:28.423Z,1509668788.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:28.799Z,1509668788.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:29.199Z,1509668789.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:29.600Z,1509668789.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:30.000Z,1509668790.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:30.390Z,1509668790.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:30.795Z,1509668790.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:31.187Z,1509668791.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:31.579Z,1509668791.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:32.003Z,1509668792.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:32.400Z,1509668792.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:32.797Z,1509668792.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:33.191Z,1509668793.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:33.614Z,1509668793.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:33.986Z,1509668793.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:34.383Z,1509668794.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:34.791Z,1509668794.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:35.196Z,1509668795.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:35.603Z,1509668795.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:35.996Z,1509668795.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:36.385Z,1509668796.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:36.791Z,1509668796.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:37.186Z,1509668797.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:37.585Z,1509668797.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:37.996Z,1509668797.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:38.393Z,1509668798.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:38.481Z,1509668798.481 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T00:26:38.481Z,1509668798.481 [DropWeight] No Fault, FailCount= 1
2017-11-03T00:26:38.796Z,1509668798.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:39.190Z,1509668799.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:39.591Z,1509668799.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:39.985Z,1509668799.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:40.399Z,1509668800.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:40.811Z,1509668800.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:41.195Z,1509668801.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:41.619Z,1509668801.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:44.714Z,1509668804.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:44.886Z,1509668804.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:45.265Z,1509668805.265 [PNI_TCM](ERROR): CRC does not match. Expected:0x23046 got:0x3440
2017-11-03T00:26:45.315Z,1509668805.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:45.718Z,1509668805.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:46.104Z,1509668806.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:46.104Z,1509668806.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2017-11-03T00:26:46.104Z,1509668806.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:26:46.106Z,1509668806.106 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:46.106Z,1509668806.106 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2017-11-03T00:26:46.106Z,1509668806.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:26:46.108Z,1509668806.108 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:46.108Z,1509668806.108 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-11-03T00:26:46.108Z,1509668806.108 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:26:46.201Z,1509668806.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:26:46.201Z,1509668806.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:26:46.201Z,1509668806.201 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:26:46.568Z,1509668806.568 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:26:46.568Z,1509668806.568 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2017-11-03T00:26:46.569Z,1509668806.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:26:46.569Z,1509668806.569 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2017-11-03T00:26:46.569Z,1509668806.569 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:26:46.569Z,1509668806.569 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-11-03T00:26:46.878Z,1509668806.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:26:46.879Z,1509668806.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:26:46.879Z,1509668806.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:26:46.879Z,1509668806.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:26:46.880Z,1509668806.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:26:46.880Z,1509668806.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:26:46.881Z,1509668806.881 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:26:46.881Z,1509668806.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:26:46.881Z,1509668806.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:26:47.271Z,1509668807.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:26:47.273Z,1509668807.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:47.686Z,1509668807.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:26:47.687Z,1509668807.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:48.073Z,1509668808.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:26:48.074Z,1509668808.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:48.468Z,1509668808.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:26:48.469Z,1509668808.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:48.871Z,1509668808.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:26:48.871Z,1509668808.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:49.294Z,1509668809.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:26:49.295Z,1509668809.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:49.676Z,1509668809.676 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T00:26:49.713Z,1509668809.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:26:49.714Z,1509668809.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:50.090Z,1509668810.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:26:50.091Z,1509668810.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:50.478Z,1509668810.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:26:50.479Z,1509668810.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:50.886Z,1509668810.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:26:50.887Z,1509668810.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:51.274Z,1509668811.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:26:51.275Z,1509668811.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:51.668Z,1509668811.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:26:51.673Z,1509668811.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:52.076Z,1509668812.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:26:52.077Z,1509668812.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:52.507Z,1509668812.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:26:52.508Z,1509668812.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:52.877Z,1509668812.877 [PNI_TCM](ERROR): CRC does not match. Expected:0x1063 got:0x7361
2017-11-03T00:26:52.914Z,1509668812.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:26:52.915Z,1509668812.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:53.286Z,1509668813.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:26:53.287Z,1509668813.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:53.672Z,1509668813.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T00:26:53.673Z,1509668813.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:54.090Z,1509668814.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:26:54.091Z,1509668814.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:54.472Z,1509668814.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:26:54.473Z,1509668814.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:54.878Z,1509668814.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:26:54.879Z,1509668814.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:55.284Z,1509668815.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:26:55.285Z,1509668815.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:55.687Z,1509668815.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:26:55.688Z,1509668815.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:56.133Z,1509668816.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:26:56.134Z,1509668816.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:56.481Z,1509668816.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:26:56.482Z,1509668816.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:56.866Z,1509668816.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T00:26:56.890Z,1509668816.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T00:26:56.891Z,1509668816.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:57.274Z,1509668817.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T00:26:57.275Z,1509668817.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:57.698Z,1509668817.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T00:26:57.699Z,1509668817.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:58.083Z,1509668818.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T00:26:58.084Z,1509668818.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:58.484Z,1509668818.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T00:26:58.485Z,1509668818.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:58.923Z,1509668818.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T00:26:58.924Z,1509668818.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:59.285Z,1509668819.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T00:26:59.286Z,1509668819.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:26:59.698Z,1509668819.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T00:26:59.699Z,1509668819.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:00.117Z,1509668820.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T00:27:00.118Z,1509668820.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:00.476Z,1509668820.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T00:27:00.478Z,1509668820.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:00.875Z,1509668820.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T00:27:00.876Z,1509668820.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:01.290Z,1509668821.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:27:01.291Z,1509668821.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:01.684Z,1509668821.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T00:27:01.685Z,1509668821.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:02.103Z,1509668822.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T00:27:02.103Z,1509668822.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:02.489Z,1509668822.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T00:27:02.490Z,1509668822.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:02.859Z,1509668822.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T00:27:02.860Z,1509668822.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:03.262Z,1509668823.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T00:27:03.263Z,1509668823.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:03.686Z,1509668823.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T00:27:03.687Z,1509668823.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:04.086Z,1509668824.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T00:27:04.087Z,1509668824.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:04.486Z,1509668824.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T00:27:04.487Z,1509668824.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:04.886Z,1509668824.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T00:27:04.887Z,1509668824.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:05.289Z,1509668825.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T00:27:05.290Z,1509668825.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:05.661Z,1509668825.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T00:27:05.662Z,1509668825.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:06.063Z,1509668826.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T00:27:06.064Z,1509668826.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:06.467Z,1509668826.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:06.894Z,1509668826.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:07.286Z,1509668827.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:07.687Z,1509668827.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:08.087Z,1509668828.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:08.494Z,1509668828.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:08.861Z,1509668828.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:09.264Z,1509668829.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:09.663Z,1509668829.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:10.095Z,1509668830.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:10.511Z,1509668830.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:10.888Z,1509668830.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:11.264Z,1509668831.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:11.688Z,1509668831.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:12.100Z,1509668832.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:12.467Z,1509668832.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:12.895Z,1509668832.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:13.306Z,1509668833.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:13.710Z,1509668833.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:14.073Z,1509668834.073 [PNI_TCM](ERROR): CRC does not match. Expected:0x59122 got:0x17074
2017-11-03T00:27:14.133Z,1509668834.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:14.465Z,1509668834.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:14.887Z,1509668834.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:15.268Z,1509668835.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:15.667Z,1509668835.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:16.093Z,1509668836.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:16.498Z,1509668836.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:16.894Z,1509668836.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:17.261Z,1509668837.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x65328 got:0x49820
2017-11-03T00:27:17.302Z,1509668837.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:17.669Z,1509668837.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:18.098Z,1509668838.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:18.471Z,1509668838.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:18.893Z,1509668838.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:19.275Z,1509668839.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:19.702Z,1509668839.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:20.092Z,1509668840.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:20.460Z,1509668840.460 [PNI_TCM](ERROR): CRC does not match. Expected:0x27323 got:0x6210
2017-11-03T00:27:20.502Z,1509668840.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:20.894Z,1509668840.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:21.299Z,1509668841.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:21.674Z,1509668841.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x57767 got:0x59426
2017-11-03T00:27:21.697Z,1509668841.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:22.071Z,1509668842.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:22.469Z,1509668842.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:22.902Z,1509668842.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:23.273Z,1509668843.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x3010 got:0x31468
2017-11-03T00:27:23.297Z,1509668843.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:23.693Z,1509668843.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:24.069Z,1509668844.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:24.494Z,1509668844.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:24.908Z,1509668844.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:25.293Z,1509668845.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:25.670Z,1509668845.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:26.111Z,1509668846.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:26.486Z,1509668846.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:26.911Z,1509668846.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:27.274Z,1509668847.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:27.707Z,1509668847.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:28.114Z,1509668848.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:28.490Z,1509668848.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:28.893Z,1509668848.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:29.289Z,1509668849.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:29.674Z,1509668849.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:30.070Z,1509668850.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:30.468Z,1509668850.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:30.895Z,1509668850.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:31.276Z,1509668851.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:31.671Z,1509668851.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:32.078Z,1509668852.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:32.491Z,1509668852.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:32.871Z,1509668852.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:33.270Z,1509668853.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:33.675Z,1509668853.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:34.098Z,1509668854.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:34.474Z,1509668854.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x48290 got:0x7361
2017-11-03T00:27:34.498Z,1509668854.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:34.897Z,1509668854.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:35.271Z,1509668855.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:35.691Z,1509668855.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:36.072Z,1509668856.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:36.471Z,1509668856.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:36.874Z,1509668856.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:37.298Z,1509668857.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:37.673Z,1509668857.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:38.074Z,1509668858.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:38.470Z,1509668858.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:38.911Z,1509668858.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:39.274Z,1509668859.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:39.670Z,1509668859.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:40.126Z,1509668860.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:40.503Z,1509668860.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:40.873Z,1509668860.873 [PNI_TCM](ERROR): CRC does not match. Expected:0x40073 got:0x54811
2017-11-03T00:27:40.923Z,1509668860.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:41.272Z,1509668861.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:41.708Z,1509668861.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:44.787Z,1509668864.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:44.924Z,1509668864.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:45.333Z,1509668865.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:45.737Z,1509668865.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:46.128Z,1509668866.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:46.521Z,1509668866.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:46.923Z,1509668866.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:47.324Z,1509668867.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:47.725Z,1509668867.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:48.132Z,1509668868.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:48.532Z,1509668868.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:48.938Z,1509668868.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:49.331Z,1509668869.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:49.731Z,1509668869.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:50.125Z,1509668870.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:50.526Z,1509668870.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:50.933Z,1509668870.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:51.333Z,1509668871.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:51.733Z,1509668871.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:52.123Z,1509668872.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:52.534Z,1509668872.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:52.939Z,1509668872.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:53.333Z,1509668873.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:53.736Z,1509668873.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:54.131Z,1509668874.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:54.527Z,1509668874.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:54.936Z,1509668874.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:55.343Z,1509668875.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:55.759Z,1509668875.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:56.128Z,1509668876.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:56.533Z,1509668876.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:56.958Z,1509668876.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:57.342Z,1509668877.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:57.735Z,1509668877.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:58.159Z,1509668878.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:58.521Z,1509668878.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:58.972Z,1509668878.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:59.333Z,1509668879.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:27:59.766Z,1509668879.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:00.122Z,1509668880.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:00.523Z,1509668880.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:00.938Z,1509668880.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:01.333Z,1509668881.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:01.733Z,1509668881.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:02.127Z,1509668882.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:02.518Z,1509668882.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:02.933Z,1509668882.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:03.338Z,1509668883.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:03.731Z,1509668883.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:04.125Z,1509668884.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:04.520Z,1509668884.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:04.932Z,1509668884.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:05.332Z,1509668885.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:05.738Z,1509668885.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:06.121Z,1509668886.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:06.521Z,1509668886.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:06.932Z,1509668886.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:07.335Z,1509668887.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:07.732Z,1509668887.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:08.123Z,1509668888.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:08.523Z,1509668888.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:08.932Z,1509668888.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:09.338Z,1509668889.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:09.732Z,1509668889.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:10.121Z,1509668890.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:10.539Z,1509668890.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:10.932Z,1509668890.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:11.332Z,1509668891.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:11.763Z,1509668891.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:12.125Z,1509668892.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:12.521Z,1509668892.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:12.970Z,1509668892.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:13.336Z,1509668893.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:13.770Z,1509668893.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:14.148Z,1509668894.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:14.522Z,1509668894.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:14.932Z,1509668894.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:15.332Z,1509668895.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:15.733Z,1509668895.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:16.131Z,1509668896.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:16.522Z,1509668896.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:16.966Z,1509668896.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:17.333Z,1509668897.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:17.742Z,1509668897.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:18.122Z,1509668898.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:18.524Z,1509668898.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:18.933Z,1509668898.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:19.333Z,1509668899.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:19.733Z,1509668899.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:20.126Z,1509668900.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:20.531Z,1509668900.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:20.932Z,1509668900.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:21.333Z,1509668901.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:21.739Z,1509668901.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:22.131Z,1509668902.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:22.522Z,1509668902.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:22.933Z,1509668902.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:23.337Z,1509668903.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:23.733Z,1509668903.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:24.170Z,1509668904.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:24.521Z,1509668904.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:24.984Z,1509668904.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:25.333Z,1509668905.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:25.733Z,1509668905.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:26.124Z,1509668906.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:26.570Z,1509668906.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:26.932Z,1509668906.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:27.333Z,1509668907.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:27.770Z,1509668907.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:28.123Z,1509668908.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:28.566Z,1509668908.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:28.978Z,1509668908.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:29.331Z,1509668909.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:29.735Z,1509668909.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:30.125Z,1509668910.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:30.525Z,1509668910.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:30.934Z,1509668910.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:31.341Z,1509668911.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:31.731Z,1509668911.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:32.133Z,1509668912.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:32.535Z,1509668912.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:32.940Z,1509668912.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:33.347Z,1509668913.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:33.741Z,1509668913.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:34.111Z,1509668914.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:34.512Z,1509668914.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:34.943Z,1509668914.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:35.341Z,1509668915.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:35.741Z,1509668915.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:36.112Z,1509668916.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:36.516Z,1509668916.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:36.940Z,1509668916.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:37.343Z,1509668917.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:37.739Z,1509668917.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:38.115Z,1509668918.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:38.519Z,1509668918.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:38.940Z,1509668918.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:39.340Z,1509668919.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:39.736Z,1509668919.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:40.162Z,1509668920.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:40.515Z,1509668920.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:40.965Z,1509668920.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:41.337Z,1509668921.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:41.762Z,1509668921.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:44.798Z,1509668924.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:44.994Z,1509668924.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:45.399Z,1509668925.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:45.763Z,1509668925.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:46.163Z,1509668926.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:46.553Z,1509668926.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:46.954Z,1509668926.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:47.355Z,1509668927.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:47.759Z,1509668927.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:48.171Z,1509668928.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:48.560Z,1509668928.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:48.964Z,1509668928.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:49.352Z,1509668929.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:49.754Z,1509668929.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:50.156Z,1509668930.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:50.554Z,1509668930.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:50.964Z,1509668930.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:51.371Z,1509668931.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:51.771Z,1509668931.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:52.154Z,1509668932.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:52.554Z,1509668932.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:52.955Z,1509668932.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:53.363Z,1509668933.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:53.753Z,1509668933.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:54.164Z,1509668934.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:54.563Z,1509668934.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:54.964Z,1509668934.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:55.355Z,1509668935.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:55.754Z,1509668935.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:56.195Z,1509668936.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:56.554Z,1509668936.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:56.964Z,1509668936.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:57.406Z,1509668937.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:57.761Z,1509668937.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:58.198Z,1509668938.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:58.555Z,1509668938.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:58.983Z,1509668938.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:59.383Z,1509668939.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:28:59.755Z,1509668939.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:00.165Z,1509668940.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:00.569Z,1509668940.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:00.971Z,1509668940.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:01.358Z,1509668941.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:01.756Z,1509668941.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:02.157Z,1509668942.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:02.557Z,1509668942.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:02.965Z,1509668942.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:03.366Z,1509668943.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:03.765Z,1509668943.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:04.156Z,1509668944.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:04.579Z,1509668944.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:04.957Z,1509668944.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:05.356Z,1509668945.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:05.761Z,1509668945.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:06.165Z,1509668946.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:06.567Z,1509668946.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:06.967Z,1509668946.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:07.361Z,1509668947.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:07.761Z,1509668947.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:08.161Z,1509668948.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:08.562Z,1509668948.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:08.968Z,1509668948.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:09.369Z,1509668949.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:09.768Z,1509668949.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:10.146Z,1509668950.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:10.544Z,1509668950.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:10.946Z,1509668950.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:11.387Z,1509668951.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:11.769Z,1509668951.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:12.198Z,1509668952.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:12.565Z,1509668952.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:13.015Z,1509668953.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:13.378Z,1509668953.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:13.767Z,1509668953.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:14.146Z,1509668954.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:14.551Z,1509668954.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:14.973Z,1509668954.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:15.373Z,1509668955.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:15.774Z,1509668955.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:16.143Z,1509668956.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:16.544Z,1509668956.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:16.944Z,1509668956.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:17.344Z,1509668957.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:17.750Z,1509668957.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:18.172Z,1509668958.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:18.572Z,1509668958.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:18.972Z,1509668958.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:19.343Z,1509668959.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:19.743Z,1509668959.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:20.144Z,1509668960.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:20.543Z,1509668960.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:20.972Z,1509668960.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:21.371Z,1509668961.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:21.772Z,1509668961.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:22.150Z,1509668962.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:22.544Z,1509668962.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:22.943Z,1509668962.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:23.343Z,1509668963.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:23.744Z,1509668963.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:24.173Z,1509668964.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:24.572Z,1509668964.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:25.020Z,1509668965.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:25.386Z,1509668965.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:25.746Z,1509668965.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:26.175Z,1509668966.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:26.547Z,1509668966.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:26.995Z,1509668966.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:27.394Z,1509668967.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:27.775Z,1509668967.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:28.147Z,1509668968.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:28.546Z,1509668968.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:28.947Z,1509668968.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:29.347Z,1509668969.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:29.751Z,1509668969.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:30.175Z,1509668970.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:30.552Z,1509668970.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:30.976Z,1509668970.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:31.347Z,1509668971.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:31.747Z,1509668971.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:32.153Z,1509668972.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:32.552Z,1509668972.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:32.959Z,1509668972.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:33.359Z,1509668973.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:33.759Z,1509668973.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:34.159Z,1509668974.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:34.552Z,1509668974.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:34.953Z,1509668974.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:35.356Z,1509668975.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:35.758Z,1509668975.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:36.160Z,1509668976.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:36.560Z,1509668976.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:36.966Z,1509668976.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:37.353Z,1509668977.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:37.741Z,1509668977.741 [BPC1](ERROR): Failed to parse message.
2017-11-03T00:29:37.741Z,1509668977.741 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T00:29:37.741Z,1509668977.741 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:29:37.741Z,1509668977.741 [BPC1](ERROR): Data Fault
2017-11-03T00:29:37.749Z,1509668977.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:37.849Z,1509668977.849 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:29:38.153Z,1509668978.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:38.552Z,1509668978.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:38.960Z,1509668978.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:39.069Z,1509668979.069 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:29:39.069Z,1509668979.069 [BPC1] No Fault, FailCount= 1
2017-11-03T00:29:39.411Z,1509668979.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:39.767Z,1509668979.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:40.154Z,1509668980.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:40.586Z,1509668980.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:40.953Z,1509668980.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:41.355Z,1509668981.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:41.755Z,1509668981.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:44.861Z,1509668984.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:45.042Z,1509668985.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:45.413Z,1509668985.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:45.815Z,1509668985.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:46.204Z,1509668986.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:46.608Z,1509668986.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:47.013Z,1509668987.013 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:47.013Z,1509668987.013 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2017-11-03T00:29:47.013Z,1509668987.013 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:29:47.015Z,1509668987.015 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:47.015Z,1509668987.015 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2017-11-03T00:29:47.015Z,1509668987.015 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:29:47.017Z,1509668987.017 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:47.017Z,1509668987.017 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-11-03T00:29:47.017Z,1509668987.017 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:29:47.109Z,1509668987.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:29:47.109Z,1509668987.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:29:47.109Z,1509668987.109 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:29:47.504Z,1509668987.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:29:47.504Z,1509668987.504 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2017-11-03T00:29:47.505Z,1509668987.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:29:47.505Z,1509668987.505 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2017-11-03T00:29:47.505Z,1509668987.505 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:29:47.505Z,1509668987.505 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-11-03T00:29:47.818Z,1509668987.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:29:47.818Z,1509668987.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:29:47.818Z,1509668987.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:29:47.819Z,1509668987.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:29:47.819Z,1509668987.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:29:47.820Z,1509668987.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:29:47.820Z,1509668987.820 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:29:47.820Z,1509668987.820 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:29:47.821Z,1509668987.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:29:48.205Z,1509668988.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:29:48.206Z,1509668988.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:48.605Z,1509668988.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:29:48.606Z,1509668988.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:49.014Z,1509668989.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:29:49.015Z,1509668989.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:49.410Z,1509668989.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:29:49.411Z,1509668989.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:49.809Z,1509668989.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:29:49.810Z,1509668989.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:50.226Z,1509668990.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:29:50.227Z,1509668990.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:50.626Z,1509668990.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:29:50.627Z,1509668990.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:51.026Z,1509668991.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:29:51.027Z,1509668991.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:51.426Z,1509668991.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:29:51.427Z,1509668991.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:51.809Z,1509668991.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:29:51.810Z,1509668991.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:52.210Z,1509668992.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:29:52.211Z,1509668992.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:52.631Z,1509668992.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:29:52.632Z,1509668992.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:53.022Z,1509668993.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:29:53.023Z,1509668993.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:53.430Z,1509668993.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:29:53.431Z,1509668993.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:53.854Z,1509668993.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:29:53.855Z,1509668993.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:54.209Z,1509668994.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:29:54.210Z,1509668994.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:54.648Z,1509668994.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T00:29:54.649Z,1509668994.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:55.047Z,1509668995.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:29:55.048Z,1509668995.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:55.410Z,1509668995.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:29:55.411Z,1509668995.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:55.818Z,1509668995.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:29:55.819Z,1509668995.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:56.223Z,1509668996.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:29:56.224Z,1509668996.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:56.620Z,1509668996.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:29:56.621Z,1509668996.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:57.019Z,1509668997.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:29:57.020Z,1509668997.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:57.411Z,1509668997.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:29:57.412Z,1509668997.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:57.813Z,1509668997.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T00:29:57.814Z,1509668997.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:58.210Z,1509668998.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T00:29:58.211Z,1509668998.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:58.611Z,1509668998.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T00:29:58.612Z,1509668998.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:59.017Z,1509668999.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T00:29:59.018Z,1509668999.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:59.420Z,1509668999.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T00:29:59.421Z,1509668999.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:29:59.826Z,1509668999.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T00:29:59.827Z,1509668999.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:00.214Z,1509669000.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T00:30:00.215Z,1509669000.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:00.612Z,1509669000.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T00:30:00.613Z,1509669000.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:01.010Z,1509669001.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T00:30:01.011Z,1509669001.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:01.414Z,1509669001.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T00:30:01.415Z,1509669001.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:01.812Z,1509669001.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T00:30:01.813Z,1509669001.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:02.222Z,1509669002.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:30:02.223Z,1509669002.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:02.625Z,1509669002.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T00:30:02.626Z,1509669002.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:03.023Z,1509669003.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T00:30:03.025Z,1509669003.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:03.415Z,1509669003.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T00:30:03.416Z,1509669003.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:03.812Z,1509669003.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T00:30:03.813Z,1509669003.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:04.211Z,1509669004.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T00:30:04.212Z,1509669004.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:04.614Z,1509669004.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T00:30:04.615Z,1509669004.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:05.023Z,1509669005.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T00:30:05.024Z,1509669005.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:05.470Z,1509669005.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T00:30:05.471Z,1509669005.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:05.820Z,1509669005.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T00:30:05.821Z,1509669005.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:06.212Z,1509669006.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T00:30:06.213Z,1509669006.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:06.610Z,1509669006.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T00:30:06.611Z,1509669006.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:07.034Z,1509669007.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:07.417Z,1509669007.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:07.806Z,1509669007.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:08.259Z,1509669008.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:08.624Z,1509669008.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:09.057Z,1509669009.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:09.416Z,1509669009.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:09.835Z,1509669009.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:10.219Z,1509669010.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:10.618Z,1509669010.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:11.020Z,1509669011.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:11.423Z,1509669011.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:11.826Z,1509669011.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:12.195Z,1509669012.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:12.616Z,1509669012.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:13.017Z,1509669013.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:13.413Z,1509669013.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:13.820Z,1509669013.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:14.226Z,1509669014.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:14.619Z,1509669014.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:15.020Z,1509669015.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:15.399Z,1509669015.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:15.796Z,1509669015.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:16.200Z,1509669016.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:16.599Z,1509669016.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:17.025Z,1509669017.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:17.427Z,1509669017.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:17.830Z,1509669017.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:18.218Z,1509669018.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:18.602Z,1509669018.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:19.019Z,1509669019.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:19.397Z,1509669019.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:19.799Z,1509669019.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:20.239Z,1509669020.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:20.625Z,1509669020.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:21.028Z,1509669021.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:21.400Z,1509669021.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:21.800Z,1509669021.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:22.250Z,1509669022.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:22.604Z,1509669022.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:23.047Z,1509669023.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:23.427Z,1509669023.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:23.858Z,1509669023.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:24.235Z,1509669024.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:24.631Z,1509669024.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:25.003Z,1509669025.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:25.404Z,1509669025.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:25.803Z,1509669025.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:26.231Z,1509669026.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:26.628Z,1509669026.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:27.029Z,1509669027.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:27.407Z,1509669027.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:27.803Z,1509669027.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:28.207Z,1509669028.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:28.603Z,1509669028.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:29.032Z,1509669029.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:29.428Z,1509669029.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:29.831Z,1509669029.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:30.205Z,1509669030.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:30.603Z,1509669030.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:31.004Z,1509669031.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:31.404Z,1509669031.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:31.812Z,1509669031.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:32.231Z,1509669032.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:32.632Z,1509669032.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:33.027Z,1509669033.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:33.405Z,1509669033.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:33.810Z,1509669033.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:34.205Z,1509669034.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:34.650Z,1509669034.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:35.033Z,1509669035.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:35.434Z,1509669035.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:35.833Z,1509669035.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:36.258Z,1509669036.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:36.606Z,1509669036.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:37.043Z,1509669037.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:37.406Z,1509669037.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:37.842Z,1509669037.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:38.243Z,1509669038.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:38.619Z,1509669038.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:39.013Z,1509669039.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:39.409Z,1509669039.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:39.810Z,1509669039.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:40.210Z,1509669040.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:40.607Z,1509669040.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:41.011Z,1509669041.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:41.417Z,1509669041.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:41.818Z,1509669041.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:44.913Z,1509669044.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:44.917Z,1509669044.917 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T00:25:44.6Z
2017-11-03T00:30:44.917Z,1509669044.917 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T00:30:44.917Z,1509669044.917 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T00:30:45.091Z,1509669045.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:45.598Z,1509669045.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:45.900Z,1509669045.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:46.299Z,1509669046.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:46.691Z,1509669046.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:50.827Z,1509669050.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:50.941Z,1509669050.941 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0008.lzma
2017-11-03T00:30:51.001Z,1509669051.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:51.493Z,1509669051.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:51.764Z,1509669051.764 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0008.lzma.bak
2017-11-03T00:30:51.764Z,1509669051.764 [DataOverHttps](INFO): SBD MOMSN=5182266
2017-11-03T00:30:51.859Z,1509669051.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:52.714Z,1509669052.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:52.947Z,1509669052.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:58.907Z,1509669058.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:59.106Z,1509669059.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:59.496Z,1509669059.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:30:59.895Z,1509669059.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:00.299Z,1509669060.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:00.695Z,1509669060.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:03.852Z,1509669063.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:03.945Z,1509669063.945 [DataOverHttps](INFO): Sending 409 bytes from file Logs/20171103T001125/Express0009.lzma
2017-11-03T00:31:04.028Z,1509669064.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:04.399Z,1509669064.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:04.743Z,1509669064.743 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0009.lzma.bak
2017-11-03T00:31:04.743Z,1509669064.743 [DataOverHttps](INFO): SBD MOMSN=5182268
2017-11-03T00:31:04.856Z,1509669064.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:05.403Z,1509669065.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:05.406Z,1509669065.406 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T00:31:05.406Z,1509669065.406 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T00:31:05.406Z,1509669065.406 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T00:31:05.599Z,1509669065.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:08.698Z,1509669068.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:08.849Z,1509669068.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:09.315Z,1509669069.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:09.695Z,1509669069.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:10.078Z,1509669070.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:10.448Z,1509669070.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:10.851Z,1509669070.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:11.250Z,1509669071.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:11.648Z,1509669071.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:12.057Z,1509669072.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:12.458Z,1509669072.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:12.859Z,1509669072.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:13.245Z,1509669073.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:13.647Z,1509669073.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:14.057Z,1509669074.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:14.457Z,1509669074.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:14.853Z,1509669074.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:15.261Z,1509669075.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:15.661Z,1509669075.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:16.057Z,1509669076.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:16.455Z,1509669076.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:16.847Z,1509669076.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:17.260Z,1509669077.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:17.635Z,1509669077.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:18.067Z,1509669078.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:18.462Z,1509669078.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:18.863Z,1509669078.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:19.235Z,1509669079.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:19.635Z,1509669079.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:20.062Z,1509669080.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:20.487Z,1509669080.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:20.861Z,1509669080.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:21.263Z,1509669081.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:21.674Z,1509669081.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:22.088Z,1509669082.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:22.435Z,1509669082.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:22.883Z,1509669082.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:23.236Z,1509669083.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:23.678Z,1509669083.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:24.104Z,1509669084.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:24.467Z,1509669084.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:24.863Z,1509669084.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:25.238Z,1509669085.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:25.663Z,1509669085.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:26.058Z,1509669086.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:26.435Z,1509669086.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:26.834Z,1509669086.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:27.266Z,1509669087.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:27.678Z,1509669087.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:28.044Z,1509669088.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:28.443Z,1509669088.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:28.847Z,1509669088.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:29.239Z,1509669089.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:29.638Z,1509669089.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:30.071Z,1509669090.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:30.474Z,1509669090.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:30.877Z,1509669090.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:31.243Z,1509669091.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:31.673Z,1509669091.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:32.049Z,1509669092.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:32.445Z,1509669092.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:32.842Z,1509669092.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:33.250Z,1509669093.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:33.652Z,1509669093.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:34.048Z,1509669094.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:34.446Z,1509669094.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:34.894Z,1509669094.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:35.251Z,1509669095.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:35.651Z,1509669095.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:36.098Z,1509669096.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:36.463Z,1509669096.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:36.860Z,1509669096.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:37.290Z,1509669097.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:37.377Z,1509669097.377 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T00:31:37.651Z,1509669097.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:38.086Z,1509669098.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:38.481Z,1509669098.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:38.845Z,1509669098.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:39.261Z,1509669099.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:39.662Z,1509669099.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:40.059Z,1509669100.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:40.463Z,1509669100.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:40.846Z,1509669100.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:41.242Z,1509669101.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:41.649Z,1509669101.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:42.060Z,1509669102.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:42.461Z,1509669102.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:42.864Z,1509669102.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:43.244Z,1509669103.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:43.640Z,1509669103.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:44.059Z,1509669104.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:44.444Z,1509669104.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:44.848Z,1509669104.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:45.256Z,1509669105.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:45.662Z,1509669105.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:46.057Z,1509669106.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:46.449Z,1509669106.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:46.847Z,1509669106.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:47.255Z,1509669107.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:47.644Z,1509669107.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:48.062Z,1509669108.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:48.487Z,1509669108.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:48.849Z,1509669108.849 [BPC1](ERROR): Failed to parse message.
2017-11-03T00:31:48.849Z,1509669108.849 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T00:31:48.849Z,1509669108.849 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:31:48.849Z,1509669108.849 [BPC1](ERROR): Data Fault
2017-11-03T00:31:48.859Z,1509669108.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:48.941Z,1509669108.941 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:31:49.250Z,1509669109.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:49.649Z,1509669109.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:50.054Z,1509669110.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:50.129Z,1509669110.129 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:31:50.129Z,1509669110.129 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T00:31:50.129Z,1509669110.129 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:31:50.129Z,1509669110.129 [BPC1] No Fault, FailCount= 1
2017-11-03T00:31:50.157Z,1509669110.157 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:31:50.157Z,1509669110.157 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:31:50.157Z,1509669110.157 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:31:50.157Z,1509669110.157 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:31:50.503Z,1509669110.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:50.831Z,1509669110.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:51.263Z,1509669111.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:51.681Z,1509669111.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:52.061Z,1509669112.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:52.460Z,1509669112.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:52.862Z,1509669112.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:53.256Z,1509669113.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:53.657Z,1509669113.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:54.060Z,1509669114.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:54.279Z,1509669114.279 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:31:54.345Z,1509669114.345 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:31:54.346Z,1509669114.346 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:31:54.347Z,1509669114.347 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:31:54.347Z,1509669114.347 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:31:54.522Z,1509669114.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:54.875Z,1509669114.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:55.329Z,1509669115.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:55.661Z,1509669115.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:56.037Z,1509669116.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:56.437Z,1509669116.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:56.836Z,1509669116.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:57.265Z,1509669117.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:57.666Z,1509669117.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:58.074Z,1509669118.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:58.473Z,1509669118.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:58.838Z,1509669118.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:59.243Z,1509669119.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:31:59.642Z,1509669119.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:00.078Z,1509669120.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:00.470Z,1509669120.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:00.870Z,1509669120.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:01.269Z,1509669121.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:01.639Z,1509669121.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:02.043Z,1509669122.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:02.450Z,1509669122.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:02.890Z,1509669122.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:03.249Z,1509669123.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:03.695Z,1509669123.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:04.053Z,1509669124.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:04.480Z,1509669124.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:04.839Z,1509669124.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:05.286Z,1509669125.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:05.683Z,1509669125.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:06.064Z,1509669126.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:09.263Z,1509669129.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:09.433Z,1509669129.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:09.820Z,1509669129.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:10.220Z,1509669130.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:10.623Z,1509669130.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:11.029Z,1509669131.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:11.430Z,1509669131.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:11.828Z,1509669131.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:12.225Z,1509669132.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:12.624Z,1509669132.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:13.011Z,1509669133.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:13.408Z,1509669133.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:13.831Z,1509669133.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:14.237Z,1509669134.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:14.635Z,1509669134.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:15.036Z,1509669135.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:15.413Z,1509669135.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:15.808Z,1509669135.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:16.240Z,1509669136.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:16.615Z,1509669136.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:17.034Z,1509669137.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:17.437Z,1509669137.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:17.902Z,1509669137.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:18.239Z,1509669138.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:18.614Z,1509669138.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:19.054Z,1509669139.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:19.408Z,1509669139.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:19.855Z,1509669139.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:20.303Z,1509669140.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:20.637Z,1509669140.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:21.033Z,1509669141.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:21.411Z,1509669141.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:21.810Z,1509669141.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:22.218Z,1509669142.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:22.638Z,1509669142.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:23.020Z,1509669143.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:23.439Z,1509669143.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:23.839Z,1509669143.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:24.219Z,1509669144.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:24.615Z,1509669144.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:25.016Z,1509669145.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:25.417Z,1509669145.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:25.815Z,1509669145.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:26.220Z,1509669146.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:26.619Z,1509669146.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:27.035Z,1509669147.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:27.423Z,1509669147.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:27.819Z,1509669147.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:28.236Z,1509669148.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:28.618Z,1509669148.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:29.033Z,1509669149.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:29.433Z,1509669149.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:29.828Z,1509669149.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:30.231Z,1509669150.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:30.615Z,1509669150.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:31.023Z,1509669151.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:31.421Z,1509669151.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:31.817Z,1509669151.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:32.237Z,1509669152.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:32.708Z,1509669152.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:33.026Z,1509669153.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:33.458Z,1509669153.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:33.826Z,1509669153.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:34.295Z,1509669154.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:34.678Z,1509669154.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:35.030Z,1509669155.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:35.428Z,1509669155.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:35.829Z,1509669155.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:36.219Z,1509669156.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:36.621Z,1509669156.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:37.026Z,1509669157.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:37.424Z,1509669157.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:37.822Z,1509669157.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:38.239Z,1509669158.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:38.683Z,1509669158.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:39.020Z,1509669159.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:39.415Z,1509669159.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:39.811Z,1509669159.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:40.207Z,1509669160.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:40.619Z,1509669160.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:41.024Z,1509669161.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:41.477Z,1509669161.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:41.823Z,1509669161.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:42.226Z,1509669162.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:42.613Z,1509669162.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:43.015Z,1509669163.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:43.418Z,1509669163.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:43.811Z,1509669163.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:44.229Z,1509669164.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:44.625Z,1509669164.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:45.027Z,1509669165.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:45.417Z,1509669165.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:45.820Z,1509669165.820 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T00:32:45.820Z,1509669165.820 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:32:45.820Z,1509669165.820 [BPC1](ERROR): Data Fault
2017-11-03T00:32:45.828Z,1509669165.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:45.933Z,1509669165.933 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:32:46.236Z,1509669166.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:46.616Z,1509669166.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:47.023Z,1509669167.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:47.096Z,1509669167.096 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:32:47.096Z,1509669167.096 [BPC1] No Fault, FailCount= 1
2017-11-03T00:32:47.483Z,1509669167.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:47.830Z,1509669167.830 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:47.830Z,1509669167.830 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2017-11-03T00:32:47.830Z,1509669167.830 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:32:47.832Z,1509669167.832 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:47.832Z,1509669167.832 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2017-11-03T00:32:47.832Z,1509669167.832 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:32:47.834Z,1509669167.834 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:47.834Z,1509669167.834 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-11-03T00:32:47.834Z,1509669167.834 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:32:47.952Z,1509669167.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:32:47.953Z,1509669167.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:32:47.953Z,1509669167.953 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:32:48.357Z,1509669168.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:32:48.357Z,1509669168.357 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2017-11-03T00:32:48.357Z,1509669168.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:32:48.357Z,1509669168.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2017-11-03T00:32:48.358Z,1509669168.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:32:48.358Z,1509669168.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-11-03T00:32:48.621Z,1509669168.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:32:48.622Z,1509669168.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:32:48.622Z,1509669168.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:32:48.623Z,1509669168.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:32:48.623Z,1509669168.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:32:48.623Z,1509669168.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:32:48.624Z,1509669168.624 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:32:48.624Z,1509669168.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:32:48.625Z,1509669168.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:32:49.027Z,1509669169.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:49.408Z,1509669169.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:49.831Z,1509669169.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:50.235Z,1509669170.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:50.642Z,1509669170.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:51.035Z,1509669171.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:51.407Z,1509669171.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:51.815Z,1509669171.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:52.207Z,1509669172.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:52.608Z,1509669172.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:53.036Z,1509669173.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:53.424Z,1509669173.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:53.823Z,1509669173.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:54.219Z,1509669174.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:54.610Z,1509669174.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:55.023Z,1509669175.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:55.409Z,1509669175.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:55.807Z,1509669175.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:56.235Z,1509669176.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:56.639Z,1509669176.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:57.029Z,1509669177.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:57.411Z,1509669177.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:57.850Z,1509669177.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:58.237Z,1509669178.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:58.608Z,1509669178.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:59.039Z,1509669179.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:59.376Z,1509669179.376 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T00:32:59.376Z,1509669179.376 [NAL9602] Data Fault, FailCount= 2
2017-11-03T00:32:59.376Z,1509669179.376 [NAL9602](ERROR): Data Fault
2017-11-03T00:32:59.437Z,1509669179.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:32:59.521Z,1509669179.521 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T00:32:59.778Z,1509669179.778 [NAL9602](INFO): Powering down
2017-11-03T00:32:59.811Z,1509669179.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:00.302Z,1509669180.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:00.618Z,1509669180.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:00.700Z,1509669180.700 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T00:33:00.701Z,1509669180.701 [NAL9602] No Fault, FailCount= 2
2017-11-03T00:33:01.017Z,1509669181.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:01.444Z,1509669181.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:01.817Z,1509669181.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:02.302Z,1509669182.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:02.614Z,1509669182.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:03.044Z,1509669183.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:03.415Z,1509669183.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:03.817Z,1509669183.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:04.217Z,1509669184.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:04.625Z,1509669184.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:05.015Z,1509669185.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:05.415Z,1509669185.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:05.818Z,1509669185.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:06.218Z,1509669186.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:09.468Z,1509669189.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:09.652Z,1509669189.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:10.024Z,1509669190.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:10.425Z,1509669190.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:10.823Z,1509669190.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:11.223Z,1509669191.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:11.623Z,1509669191.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:12.031Z,1509669192.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:12.426Z,1509669192.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:12.824Z,1509669192.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:13.224Z,1509669193.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:13.625Z,1509669193.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:14.026Z,1509669194.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:14.427Z,1509669194.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:14.855Z,1509669194.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:15.267Z,1509669195.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:15.623Z,1509669195.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:16.021Z,1509669196.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:16.427Z,1509669196.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:16.867Z,1509669196.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:17.231Z,1509669197.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:17.659Z,1509669197.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:18.062Z,1509669198.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:18.481Z,1509669198.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:18.831Z,1509669198.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:19.231Z,1509669199.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:19.625Z,1509669199.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:20.025Z,1509669200.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:20.427Z,1509669200.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:20.820Z,1509669200.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:21.223Z,1509669201.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:21.623Z,1509669201.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:22.024Z,1509669202.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:22.425Z,1509669202.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:22.825Z,1509669202.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:23.224Z,1509669203.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:23.623Z,1509669203.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:24.020Z,1509669204.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:24.430Z,1509669204.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:24.825Z,1509669204.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:25.231Z,1509669205.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:25.625Z,1509669205.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:26.020Z,1509669206.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:26.435Z,1509669206.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:26.826Z,1509669206.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:27.226Z,1509669207.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:27.624Z,1509669207.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:28.025Z,1509669208.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:28.426Z,1509669208.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:28.827Z,1509669208.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:29.226Z,1509669209.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:29.675Z,1509669209.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:29.984Z,1509669209.984 [NAL9602](INFO): Powering up NAL9602
2017-11-03T00:33:30.041Z,1509669210.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:30.458Z,1509669210.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:30.832Z,1509669210.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:31.215Z,1509669211.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:31.641Z,1509669211.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:32.023Z,1509669212.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:32.502Z,1509669212.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:32.847Z,1509669212.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:33.213Z,1509669213.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:33.618Z,1509669213.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:34.023Z,1509669214.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:34.419Z,1509669214.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:34.847Z,1509669214.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:35.224Z,1509669215.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:35.618Z,1509669215.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:36.018Z,1509669216.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:36.418Z,1509669216.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:36.827Z,1509669216.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:37.219Z,1509669217.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:37.618Z,1509669217.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:38.014Z,1509669218.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:38.420Z,1509669218.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:38.818Z,1509669218.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:39.218Z,1509669219.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:39.617Z,1509669219.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:40.018Z,1509669220.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:40.451Z,1509669220.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:40.784Z,1509669220.784 [NAL9602](INFO): NAL9602 initialized
2017-11-03T00:33:40.829Z,1509669220.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:41.226Z,1509669221.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:41.627Z,1509669221.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:42.028Z,1509669222.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:42.421Z,1509669222.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:42.823Z,1509669222.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:43.226Z,1509669223.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:43.634Z,1509669223.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:44.032Z,1509669224.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:44.457Z,1509669224.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:44.874Z,1509669224.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:45.280Z,1509669225.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:45.623Z,1509669225.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:46.057Z,1509669226.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:46.478Z,1509669226.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:46.882Z,1509669226.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:47.274Z,1509669227.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:47.635Z,1509669227.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:48.023Z,1509669228.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:48.423Z,1509669228.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:48.824Z,1509669228.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:49.223Z,1509669229.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:49.636Z,1509669229.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:50.032Z,1509669230.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:50.296Z,1509669230.296 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:33:50.296Z,1509669230.296 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T00:33:50.296Z,1509669230.296 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:33:50.437Z,1509669230.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:33:50.438Z,1509669230.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:50.521Z,1509669230.521 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:33:50.701Z,1509669230.701 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:33:50.887Z,1509669230.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T00:33:50.888Z,1509669230.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:50.924Z,1509669230.924 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:33:51.222Z,1509669231.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:33:51.223Z,1509669231.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:51.623Z,1509669231.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:33:51.624Z,1509669231.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:52.030Z,1509669232.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:33:52.031Z,1509669232.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:52.420Z,1509669232.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:33:52.425Z,1509669232.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:52.509Z,1509669232.509 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:33:52.509Z,1509669232.509 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T00:33:52.541Z,1509669232.541 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:33:52.541Z,1509669232.541 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:33:52.541Z,1509669232.541 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:33:52.541Z,1509669232.541 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:33:52.836Z,1509669232.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:33:52.838Z,1509669232.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:53.246Z,1509669233.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:33:53.247Z,1509669233.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:53.634Z,1509669233.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:33:53.635Z,1509669233.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:54.030Z,1509669234.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:33:54.031Z,1509669234.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:54.430Z,1509669234.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:33:54.431Z,1509669234.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:54.827Z,1509669234.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:33:54.828Z,1509669234.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:55.230Z,1509669235.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:33:55.231Z,1509669235.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:55.635Z,1509669235.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:33:55.636Z,1509669235.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:56.037Z,1509669236.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:33:56.038Z,1509669236.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:56.435Z,1509669236.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:33:56.436Z,1509669236.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:56.680Z,1509669236.680 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:33:56.743Z,1509669236.743 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:33:56.745Z,1509669236.745 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:33:56.745Z,1509669236.745 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:33:56.746Z,1509669236.746 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:33:56.851Z,1509669236.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:33:56.852Z,1509669236.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:57.236Z,1509669237.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:57.625Z,1509669237.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:58.027Z,1509669238.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:58.426Z,1509669238.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:58.836Z,1509669238.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:59.245Z,1509669239.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:33:59.698Z,1509669239.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:00.032Z,1509669240.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:00.456Z,1509669240.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:00.837Z,1509669240.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:01.251Z,1509669241.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:01.682Z,1509669241.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:02.037Z,1509669242.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:02.435Z,1509669242.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:02.815Z,1509669242.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:03.243Z,1509669243.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:03.640Z,1509669243.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:04.048Z,1509669244.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:04.415Z,1509669244.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:04.843Z,1509669244.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:05.237Z,1509669245.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:05.649Z,1509669245.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:06.039Z,1509669246.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:06.418Z,1509669246.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:09.711Z,1509669249.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:09.884Z,1509669249.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:10.263Z,1509669250.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:10.671Z,1509669250.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:11.063Z,1509669251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:11.462Z,1509669251.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:11.860Z,1509669251.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:12.259Z,1509669252.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:12.668Z,1509669252.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:13.067Z,1509669253.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:13.499Z,1509669253.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:13.894Z,1509669253.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:14.253Z,1509669254.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:14.651Z,1509669254.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:15.090Z,1509669255.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:15.445Z,1509669255.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:15.887Z,1509669255.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:16.299Z,1509669256.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:16.660Z,1509669256.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:17.051Z,1509669257.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:17.481Z,1509669257.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:17.855Z,1509669257.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:18.251Z,1509669258.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:18.657Z,1509669258.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:19.055Z,1509669259.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:19.463Z,1509669259.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:19.855Z,1509669259.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:20.259Z,1509669260.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:20.651Z,1509669260.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:21.059Z,1509669261.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:21.448Z,1509669261.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:21.856Z,1509669261.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:22.260Z,1509669262.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:22.655Z,1509669262.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:23.052Z,1509669263.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:23.461Z,1509669263.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:23.855Z,1509669263.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:24.259Z,1509669264.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:24.664Z,1509669264.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:25.071Z,1509669265.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:25.465Z,1509669265.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:25.856Z,1509669265.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:26.255Z,1509669266.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:26.662Z,1509669266.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:27.056Z,1509669267.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:27.464Z,1509669267.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:27.869Z,1509669267.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:28.341Z,1509669268.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:28.662Z,1509669268.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:29.062Z,1509669269.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:29.475Z,1509669269.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:29.866Z,1509669269.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:30.274Z,1509669270.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:30.703Z,1509669270.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:31.061Z,1509669271.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:31.475Z,1509669271.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:31.856Z,1509669271.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:32.255Z,1509669272.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:32.656Z,1509669272.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:33.056Z,1509669273.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:33.452Z,1509669273.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:33.865Z,1509669273.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:34.267Z,1509669274.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:34.664Z,1509669274.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:35.059Z,1509669275.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:35.467Z,1509669275.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:35.865Z,1509669275.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:36.243Z,1509669276.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:36.664Z,1509669276.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:37.064Z,1509669277.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:37.478Z,1509669277.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:37.867Z,1509669277.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:38.243Z,1509669278.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:38.669Z,1509669278.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:39.069Z,1509669279.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:39.455Z,1509669279.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:39.857Z,1509669279.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:40.260Z,1509669280.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:40.661Z,1509669280.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:41.046Z,1509669281.046 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T00:34:41.046Z,1509669281.046 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:34:41.046Z,1509669281.046 [BPC1](ERROR): Data Fault
2017-11-03T00:34:41.054Z,1509669281.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:41.147Z,1509669281.147 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:34:41.461Z,1509669281.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:41.853Z,1509669281.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:42.259Z,1509669282.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:42.341Z,1509669282.341 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:34:42.341Z,1509669282.341 [BPC1] No Fault, FailCount= 1
2017-11-03T00:34:42.715Z,1509669282.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:43.060Z,1509669283.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:43.463Z,1509669283.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:43.891Z,1509669283.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:44.255Z,1509669284.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:44.663Z,1509669284.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:45.055Z,1509669285.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:45.473Z,1509669285.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:45.866Z,1509669285.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:46.259Z,1509669286.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:46.665Z,1509669286.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:47.061Z,1509669287.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:47.462Z,1509669287.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:47.859Z,1509669287.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:48.256Z,1509669288.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:48.664Z,1509669288.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:49.065Z,1509669289.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:49.464Z,1509669289.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:49.863Z,1509669289.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:50.260Z,1509669290.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:50.643Z,1509669290.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:51.044Z,1509669291.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:51.458Z,1509669291.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:51.864Z,1509669291.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:52.264Z,1509669292.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:52.665Z,1509669292.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:53.059Z,1509669293.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:53.464Z,1509669293.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:53.861Z,1509669293.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:54.259Z,1509669294.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:54.666Z,1509669294.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:55.071Z,1509669295.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:55.542Z,1509669295.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:55.855Z,1509669295.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:56.247Z,1509669296.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:56.683Z,1509669296.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:57.045Z,1509669297.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:57.495Z,1509669297.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:57.891Z,1509669297.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:58.274Z,1509669298.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:58.677Z,1509669298.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:59.055Z,1509669299.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:59.491Z,1509669299.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:34:59.849Z,1509669299.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:00.251Z,1509669300.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:00.653Z,1509669300.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:01.064Z,1509669301.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:01.456Z,1509669301.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:01.851Z,1509669301.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:02.251Z,1509669302.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:02.650Z,1509669302.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:03.052Z,1509669303.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:03.452Z,1509669303.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:03.881Z,1509669303.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:04.281Z,1509669304.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:04.664Z,1509669304.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:05.052Z,1509669305.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:05.460Z,1509669305.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:05.856Z,1509669305.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:06.253Z,1509669306.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:06.686Z,1509669306.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:10.002Z,1509669310.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:10.194Z,1509669310.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:10.539Z,1509669310.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:10.971Z,1509669310.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:11.351Z,1509669311.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:11.789Z,1509669311.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:12.185Z,1509669312.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:12.555Z,1509669312.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:12.940Z,1509669312.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:13.340Z,1509669313.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:13.749Z,1509669313.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:14.131Z,1509669314.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:14.529Z,1509669314.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:14.949Z,1509669314.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:15.354Z,1509669315.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:15.766Z,1509669315.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:16.132Z,1509669316.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:16.529Z,1509669316.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:16.949Z,1509669316.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:17.328Z,1509669317.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:17.773Z,1509669317.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:18.155Z,1509669318.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:18.548Z,1509669318.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:18.927Z,1509669318.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:19.351Z,1509669319.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:19.727Z,1509669319.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:20.151Z,1509669320.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:20.528Z,1509669320.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:20.949Z,1509669320.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:21.351Z,1509669321.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:21.749Z,1509669321.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:22.129Z,1509669322.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:22.553Z,1509669322.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:22.929Z,1509669322.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:23.349Z,1509669323.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:23.749Z,1509669323.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:24.219Z,1509669324.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:24.559Z,1509669324.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:24.926Z,1509669324.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:25.379Z,1509669325.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:25.728Z,1509669325.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:26.167Z,1509669326.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:26.560Z,1509669326.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:26.959Z,1509669326.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:27.414Z,1509669327.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:27.744Z,1509669327.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:28.143Z,1509669328.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:28.537Z,1509669328.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:28.940Z,1509669328.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:29.336Z,1509669329.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:29.777Z,1509669329.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:30.151Z,1509669330.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:30.551Z,1509669330.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:30.955Z,1509669330.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:31.342Z,1509669331.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:31.755Z,1509669331.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:32.141Z,1509669332.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:32.541Z,1509669332.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:32.950Z,1509669332.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:33.362Z,1509669333.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:33.750Z,1509669333.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:34.140Z,1509669334.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:34.539Z,1509669334.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:34.942Z,1509669334.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:35.351Z,1509669335.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:35.750Z,1509669335.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:36.153Z,1509669336.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:36.549Z,1509669336.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:36.942Z,1509669336.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:37.337Z,1509669337.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:37.737Z,1509669337.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:38.139Z,1509669338.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:38.541Z,1509669338.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:39.018Z,1509669339.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:39.355Z,1509669339.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:39.782Z,1509669339.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:40.137Z,1509669340.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:40.563Z,1509669340.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:40.982Z,1509669340.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:41.383Z,1509669341.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:41.749Z,1509669341.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:42.154Z,1509669342.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:42.552Z,1509669342.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:42.947Z,1509669342.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:43.335Z,1509669343.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:43.758Z,1509669343.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:44.115Z,1509669344.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:44.143Z,1509669344.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:44.515Z,1509669344.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:44.543Z,1509669344.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:44.938Z,1509669344.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:44.963Z,1509669344.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:45.333Z,1509669345.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:45.348Z,1509669345.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:45.748Z,1509669345.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:45.764Z,1509669345.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:46.115Z,1509669346.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:46.147Z,1509669346.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:46.515Z,1509669346.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:46.543Z,1509669346.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:46.915Z,1509669346.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:46.944Z,1509669346.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:47.331Z,1509669347.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:47.351Z,1509669347.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:47.734Z,1509669347.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:47.749Z,1509669347.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:48.139Z,1509669348.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:48.154Z,1509669348.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:48.538Z,1509669348.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:48.553Z,1509669348.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:48.915Z,1509669348.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:48.946Z,1509669348.946 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:48.946Z,1509669348.946 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2017-11-03T00:35:48.946Z,1509669348.946 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:35:48.948Z,1509669348.948 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:48.949Z,1509669348.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2017-11-03T00:35:48.949Z,1509669348.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:35:48.950Z,1509669348.950 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:48.950Z,1509669348.950 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-11-03T00:35:48.951Z,1509669348.951 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:35:49.044Z,1509669349.044 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:35:49.045Z,1509669349.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:35:49.045Z,1509669349.045 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:35:49.341Z,1509669349.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:49.456Z,1509669349.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:35:49.456Z,1509669349.456 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2017-11-03T00:35:49.457Z,1509669349.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:35:49.457Z,1509669349.457 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2017-11-03T00:35:49.457Z,1509669349.457 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:35:49.458Z,1509669349.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-11-03T00:35:49.719Z,1509669349.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:49.747Z,1509669349.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:35:49.748Z,1509669349.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:35:49.748Z,1509669349.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:35:49.749Z,1509669349.749 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:35:49.749Z,1509669349.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:35:49.749Z,1509669349.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:35:49.750Z,1509669349.750 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:35:49.750Z,1509669349.750 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:35:49.751Z,1509669349.751 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:35:50.121Z,1509669350.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:50.137Z,1509669350.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:50.517Z,1509669350.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:50.532Z,1509669350.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:50.931Z,1509669350.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:50.961Z,1509669350.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:51.337Z,1509669351.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:51.367Z,1509669351.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:51.734Z,1509669351.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:51.767Z,1509669351.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:52.116Z,1509669352.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:35:52.132Z,1509669352.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:52.535Z,1509669352.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:52.768Z,1509669352.768 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:35:52.768Z,1509669352.768 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T00:35:52.768Z,1509669352.768 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:35:52.982Z,1509669352.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:35:52.983Z,1509669352.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:53.077Z,1509669353.077 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:35:53.173Z,1509669353.173 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:35:53.403Z,1509669353.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T00:35:53.404Z,1509669353.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:53.458Z,1509669353.458 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:35:53.741Z,1509669353.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:35:53.742Z,1509669353.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:54.160Z,1509669354.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:35:54.161Z,1509669354.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:54.579Z,1509669354.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:35:54.579Z,1509669354.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:54.935Z,1509669354.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:35:54.936Z,1509669354.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:55.040Z,1509669355.040 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:35:55.041Z,1509669355.041 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T00:35:55.072Z,1509669355.072 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:35:55.073Z,1509669355.073 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:35:55.073Z,1509669355.073 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:35:55.073Z,1509669355.073 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:35:55.367Z,1509669355.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:35:55.368Z,1509669355.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:55.766Z,1509669355.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:35:55.767Z,1509669355.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:56.135Z,1509669356.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:35:56.136Z,1509669356.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:56.535Z,1509669356.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:35:56.536Z,1509669356.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:56.941Z,1509669356.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:35:56.942Z,1509669356.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:57.360Z,1509669357.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:35:57.361Z,1509669357.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:57.740Z,1509669357.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:35:57.741Z,1509669357.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:58.134Z,1509669358.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:35:58.135Z,1509669358.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:58.533Z,1509669358.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:35:58.534Z,1509669358.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:58.987Z,1509669358.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T00:35:58.988Z,1509669358.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:59.267Z,1509669359.267 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:35:59.427Z,1509669359.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T00:35:59.436Z,1509669359.436 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:35:59.437Z,1509669359.437 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:35:59.438Z,1509669359.438 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:35:59.439Z,1509669359.439 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:35:59.445Z,1509669359.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:35:59.795Z,1509669359.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T00:35:59.796Z,1509669359.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:00.155Z,1509669360.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:00.570Z,1509669360.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:00.996Z,1509669360.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:01.353Z,1509669361.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:01.772Z,1509669361.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:02.143Z,1509669362.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:02.565Z,1509669362.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:02.955Z,1509669362.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:03.358Z,1509669363.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:03.756Z,1509669363.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:04.132Z,1509669364.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:04.561Z,1509669364.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:04.962Z,1509669364.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:05.371Z,1509669365.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:05.783Z,1509669365.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:05.790Z,1509669365.790 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T00:36:05.790Z,1509669365.790 [Default:CheckIn:C.Wait] Stopped
2017-11-03T00:36:05.790Z,1509669365.790 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T00:36:05.791Z,1509669365.791 [Default:CheckIn:D] Running Loop=1
2017-11-03T00:36:06.167Z,1509669366.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:06.175Z,1509669366.175 [Default:CheckIn:D] Stopped
2017-11-03T00:36:06.175Z,1509669366.175 [Default:CheckIn:E] Running Loop=1
2017-11-03T00:36:06.622Z,1509669366.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:06.683Z,1509669366.683 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.976809 min 
2017-11-03T00:36:06.683Z,1509669366.683 [Default:CheckIn:E] Stopped
2017-11-03T00:36:06.683Z,1509669366.683 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T00:36:06.683Z,1509669366.683 [Default:CheckIn] Stopped
2017-11-03T00:36:06.684Z,1509669366.684 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T00:36:06.684Z,1509669366.684 [Default:CheckIn](INFO): Running loop #3
2017-11-03T00:36:06.701Z,1509669366.701 [Default:CheckIn] Running Loop=3
2017-11-03T00:36:06.701Z,1509669366.701 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T00:36:06.701Z,1509669366.701 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T00:36:06.966Z,1509669366.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:11.594Z,1509669371.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:11.769Z,1509669371.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:12.255Z,1509669372.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:12.573Z,1509669372.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:12.998Z,1509669372.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:13.397Z,1509669373.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:13.761Z,1509669373.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:14.216Z,1509669374.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:14.563Z,1509669374.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:14.965Z,1509669374.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:15.369Z,1509669375.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:15.767Z,1509669375.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:16.226Z,1509669376.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:16.555Z,1509669376.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:16.945Z,1509669376.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:17.343Z,1509669377.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:17.764Z,1509669377.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:18.231Z,1509669378.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:18.603Z,1509669378.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:18.955Z,1509669378.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:19.343Z,1509669379.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:19.358Z,1509669379.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:19.730Z,1509669379.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:19.757Z,1509669379.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:20.128Z,1509669380.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:20.155Z,1509669380.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:20.556Z,1509669380.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:20.572Z,1509669380.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:20.954Z,1509669380.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:20.975Z,1509669380.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:21.351Z,1509669381.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:21.366Z,1509669381.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:21.758Z,1509669381.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:21.773Z,1509669381.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:22.131Z,1509669382.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:22.159Z,1509669382.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:22.551Z,1509669382.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:22.595Z,1509669382.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:22.957Z,1509669382.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:22.978Z,1509669382.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:23.355Z,1509669383.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:23.370Z,1509669383.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:23.728Z,1509669383.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:23.760Z,1509669383.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:24.129Z,1509669384.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:24.144Z,1509669384.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:24.555Z,1509669384.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:24.563Z,1509669384.563 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T00:36:24.563Z,1509669384.563 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:36:24.563Z,1509669384.563 [BPC1](ERROR): Data Fault
2017-11-03T00:36:24.573Z,1509669384.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:24.672Z,1509669384.672 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:36:24.946Z,1509669384.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:24.971Z,1509669384.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:25.361Z,1509669385.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:25.380Z,1509669385.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:25.725Z,1509669385.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:25.760Z,1509669385.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:25.848Z,1509669385.848 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:36:25.848Z,1509669385.848 [BPC1] No Fault, FailCount= 1
2017-11-03T00:36:26.178Z,1509669386.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:26.287Z,1509669386.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:26.527Z,1509669386.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:26.561Z,1509669386.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:26.954Z,1509669386.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:27.014Z,1509669387.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:27.350Z,1509669387.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:27.365Z,1509669387.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:27.750Z,1509669387.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:27.770Z,1509669387.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:28.199Z,1509669388.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:28.218Z,1509669388.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:28.529Z,1509669388.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:28.557Z,1509669388.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:28.930Z,1509669388.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:28.957Z,1509669388.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:29.331Z,1509669389.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:29.358Z,1509669389.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:29.750Z,1509669389.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:29.765Z,1509669389.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:30.197Z,1509669390.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:30.220Z,1509669390.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:30.547Z,1509669390.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:30.567Z,1509669390.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:30.930Z,1509669390.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:30.957Z,1509669390.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:31.330Z,1509669391.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:31.362Z,1509669391.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:31.721Z,1509669391.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:31.753Z,1509669391.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:32.130Z,1509669392.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:32.210Z,1509669392.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:32.529Z,1509669392.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:32.564Z,1509669392.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:32.936Z,1509669392.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:32.959Z,1509669392.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:33.358Z,1509669393.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:33.373Z,1509669393.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:33.742Z,1509669393.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:33.774Z,1509669393.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:34.131Z,1509669394.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:34.162Z,1509669394.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:34.532Z,1509669394.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:34.562Z,1509669394.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:34.933Z,1509669394.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:34.948Z,1509669394.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:35.336Z,1509669395.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:35.351Z,1509669395.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:35.749Z,1509669395.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:35.774Z,1509669395.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:36.146Z,1509669396.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:36.177Z,1509669396.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:36.542Z,1509669396.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:36.573Z,1509669396.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:36.937Z,1509669396.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:36.951Z,1509669396.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:37.333Z,1509669397.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:37.348Z,1509669397.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:37.737Z,1509669397.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:37.795Z,1509669397.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:38.138Z,1509669398.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:38.153Z,1509669398.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:38.542Z,1509669398.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:38.557Z,1509669398.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:38.941Z,1509669398.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:38.957Z,1509669398.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:39.342Z,1509669399.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:39.402Z,1509669399.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:39.737Z,1509669399.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:39.759Z,1509669399.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:40.190Z,1509669400.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:40.242Z,1509669400.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:40.542Z,1509669400.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:40.557Z,1509669400.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:40.942Z,1509669400.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:40.992Z,1509669400.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:41.341Z,1509669401.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:41.394Z,1509669401.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:41.740Z,1509669401.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:41.755Z,1509669401.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:42.188Z,1509669402.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:42.216Z,1509669402.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:42.545Z,1509669402.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:42.561Z,1509669402.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:42.946Z,1509669402.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:42.961Z,1509669402.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:43.345Z,1509669403.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:43.359Z,1509669403.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:43.739Z,1509669403.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:43.754Z,1509669403.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:44.166Z,1509669404.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:44.210Z,1509669404.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:44.550Z,1509669404.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:44.565Z,1509669404.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:44.950Z,1509669404.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:44.965Z,1509669404.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:45.350Z,1509669405.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:45.365Z,1509669405.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:45.730Z,1509669405.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:45.756Z,1509669405.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:46.131Z,1509669406.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:46.198Z,1509669406.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:46.542Z,1509669406.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:46.567Z,1509669406.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:46.942Z,1509669406.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:46.975Z,1509669406.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:47.354Z,1509669407.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:47.369Z,1509669407.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:47.733Z,1509669407.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:47.767Z,1509669407.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:48.129Z,1509669408.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:48.144Z,1509669408.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:48.541Z,1509669408.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:48.569Z,1509669408.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:48.956Z,1509669408.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:48.979Z,1509669408.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:49.342Z,1509669409.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:49.368Z,1509669409.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:49.734Z,1509669409.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:49.765Z,1509669409.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:50.129Z,1509669410.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:50.145Z,1509669410.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:50.542Z,1509669410.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:50.573Z,1509669410.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:50.949Z,1509669410.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:50.975Z,1509669410.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:51.342Z,1509669411.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:51.372Z,1509669411.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:51.730Z,1509669411.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:51.794Z,1509669411.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:52.136Z,1509669412.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:52.152Z,1509669412.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:52.550Z,1509669412.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:52.582Z,1509669412.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:52.950Z,1509669412.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:52.974Z,1509669412.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:53.345Z,1509669413.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:53.403Z,1509669413.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:53.737Z,1509669413.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:53.752Z,1509669413.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:54.179Z,1509669414.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:54.243Z,1509669414.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:54.549Z,1509669414.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:54.576Z,1509669414.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:54.947Z,1509669414.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:55.088Z,1509669415.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:55.349Z,1509669415.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:55.395Z,1509669415.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:55.733Z,1509669415.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:55.749Z,1509669415.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:56.190Z,1509669416.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:56.232Z,1509669416.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:56.545Z,1509669416.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:56.577Z,1509669416.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:56.950Z,1509669416.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:56.977Z,1509669416.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:57.349Z,1509669417.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:57.379Z,1509669417.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:57.738Z,1509669417.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:57.753Z,1509669417.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:58.187Z,1509669418.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:58.212Z,1509669418.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:58.542Z,1509669418.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:58.557Z,1509669418.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:58.942Z,1509669418.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:58.957Z,1509669418.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:59.345Z,1509669419.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:59.360Z,1509669419.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:36:59.731Z,1509669419.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:36:59.746Z,1509669419.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:00.137Z,1509669420.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:00.152Z,1509669420.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:00.542Z,1509669420.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:00.557Z,1509669420.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:00.938Z,1509669420.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:00.953Z,1509669420.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:01.343Z,1509669421.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:01.358Z,1509669421.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:01.738Z,1509669421.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:01.754Z,1509669421.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:02.137Z,1509669422.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:02.153Z,1509669422.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:02.555Z,1509669422.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:02.584Z,1509669422.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:02.949Z,1509669422.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:02.973Z,1509669422.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:03.349Z,1509669423.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:03.385Z,1509669423.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:03.737Z,1509669423.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:03.752Z,1509669423.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:04.137Z,1509669424.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:04.152Z,1509669424.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:04.549Z,1509669424.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:04.581Z,1509669424.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:04.942Z,1509669424.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:04.957Z,1509669424.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:05.372Z,1509669425.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:05.387Z,1509669425.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:05.730Z,1509669425.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:05.761Z,1509669425.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:06.129Z,1509669426.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:06.179Z,1509669426.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:06.556Z,1509669426.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:06.579Z,1509669426.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:06.945Z,1509669426.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:06.968Z,1509669426.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:10.139Z,1509669430.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:10.248Z,1509669430.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:10.452Z,1509669430.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:10.495Z,1509669430.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:10.855Z,1509669430.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:10.862Z,1509669430.862 [PNI_TCM](ERROR): CRC does not match. Expected:0x14108 got:0x13831
2017-11-03T00:37:10.899Z,1509669430.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:11.258Z,1509669431.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:11.293Z,1509669431.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:11.661Z,1509669431.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:11.692Z,1509669431.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:12.068Z,1509669432.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:12.081Z,1509669432.081 [PNI_TCM](ERROR): CRC does not match. Expected:0x40599 got:0x44928
2017-11-03T00:37:12.185Z,1509669432.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:12.467Z,1509669432.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:12.489Z,1509669432.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:12.851Z,1509669432.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:12.911Z,1509669432.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:13.248Z,1509669433.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:13.306Z,1509669433.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:13.648Z,1509669433.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:13.668Z,1509669433.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:14.053Z,1509669434.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:14.069Z,1509669434.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:14.455Z,1509669434.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:14.492Z,1509669434.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:14.867Z,1509669434.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:14.893Z,1509669434.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:15.263Z,1509669435.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:15.290Z,1509669435.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:15.663Z,1509669435.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:15.690Z,1509669435.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:16.051Z,1509669436.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:16.066Z,1509669436.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:16.452Z,1509669436.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:16.481Z,1509669436.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:16.850Z,1509669436.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:16.870Z,1509669436.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:17.255Z,1509669437.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:17.293Z,1509669437.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:17.666Z,1509669437.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:17.689Z,1509669437.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:18.067Z,1509669438.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:18.092Z,1509669438.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:18.464Z,1509669438.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:18.497Z,1509669438.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:18.848Z,1509669438.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:18.866Z,1509669438.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:19.251Z,1509669439.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:19.266Z,1509669439.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:19.653Z,1509669439.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:19.698Z,1509669439.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:20.048Z,1509669440.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:20.069Z,1509669440.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:20.450Z,1509669440.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:20.468Z,1509669440.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:20.866Z,1509669440.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:20.889Z,1509669440.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:21.262Z,1509669441.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:21.290Z,1509669441.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:21.663Z,1509669441.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:21.692Z,1509669441.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:22.050Z,1509669442.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:22.067Z,1509669442.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:22.456Z,1509669442.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:22.471Z,1509669442.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:22.852Z,1509669442.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:22.892Z,1509669442.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:23.252Z,1509669443.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:23.272Z,1509669443.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:23.667Z,1509669443.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:23.699Z,1509669443.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:24.065Z,1509669444.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:24.159Z,1509669444.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:24.467Z,1509669444.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:24.485Z,1509669444.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:24.847Z,1509669444.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:24.878Z,1509669444.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:25.246Z,1509669445.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:25.303Z,1509669445.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:25.644Z,1509669445.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:25.675Z,1509669445.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:26.048Z,1509669446.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:26.150Z,1509669446.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:26.444Z,1509669446.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:26.479Z,1509669446.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:26.863Z,1509669446.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:26.919Z,1509669446.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:27.262Z,1509669447.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:27.319Z,1509669447.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:27.667Z,1509669447.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:27.694Z,1509669447.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:28.049Z,1509669448.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:28.090Z,1509669448.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:28.452Z,1509669448.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:28.460Z,1509669448.460 [PNI_TCM](ERROR): CRC does not match. Expected:0x63649 got:0x25625
2017-11-03T00:37:28.498Z,1509669448.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:28.851Z,1509669448.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:28.866Z,1509669448.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:29.249Z,1509669449.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:29.294Z,1509669449.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:29.661Z,1509669449.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:29.686Z,1509669449.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:30.065Z,1509669450.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:30.095Z,1509669450.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:30.462Z,1509669450.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:30.486Z,1509669450.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:30.844Z,1509669450.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:30.886Z,1509669450.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:31.248Z,1509669451.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:31.285Z,1509669451.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:31.643Z,1509669451.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:31.663Z,1509669451.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:32.047Z,1509669452.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:32.062Z,1509669452.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:32.448Z,1509669452.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:32.491Z,1509669452.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:32.882Z,1509669452.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:32.903Z,1509669452.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:33.267Z,1509669453.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:33.295Z,1509669453.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:33.662Z,1509669453.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:33.685Z,1509669453.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:34.048Z,1509669454.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:34.087Z,1509669454.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:34.445Z,1509669454.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:34.465Z,1509669454.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:34.854Z,1509669454.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:34.890Z,1509669454.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:35.251Z,1509669455.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:35.287Z,1509669455.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:35.667Z,1509669455.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:35.694Z,1509669455.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:36.064Z,1509669456.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:36.155Z,1509669456.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:36.464Z,1509669456.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:36.491Z,1509669456.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:36.851Z,1509669456.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:36.866Z,1509669456.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:37.248Z,1509669457.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:37.294Z,1509669457.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:37.648Z,1509669457.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:37.695Z,1509669457.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:38.052Z,1509669458.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:38.068Z,1509669458.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:38.457Z,1509669458.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:38.472Z,1509669458.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:38.861Z,1509669458.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:38.903Z,1509669458.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:39.260Z,1509669459.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:39.268Z,1509669459.268 [PNI_TCM](ERROR): CRC does not match. Expected:0x58179 got:0x13679
2017-11-03T00:37:39.330Z,1509669459.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:39.664Z,1509669459.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:39.683Z,1509669459.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:40.059Z,1509669460.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:40.074Z,1509669460.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:40.443Z,1509669460.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:40.498Z,1509669460.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:40.846Z,1509669460.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:40.885Z,1509669460.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:41.247Z,1509669461.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:41.318Z,1509669461.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:41.667Z,1509669461.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:41.722Z,1509669461.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:42.067Z,1509669462.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:42.085Z,1509669462.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:42.472Z,1509669462.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:42.487Z,1509669462.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:42.849Z,1509669462.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:42.878Z,1509669462.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:43.247Z,1509669463.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:43.273Z,1509669463.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:43.645Z,1509669463.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:43.677Z,1509669463.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:44.042Z,1509669464.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:44.073Z,1509669464.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:44.448Z,1509669464.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:44.477Z,1509669464.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:44.868Z,1509669464.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:44.883Z,1509669464.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:45.272Z,1509669465.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:45.288Z,1509669465.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:45.669Z,1509669465.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:45.684Z,1509669465.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:46.046Z,1509669466.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:46.076Z,1509669466.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:46.444Z,1509669466.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:46.475Z,1509669466.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:46.855Z,1509669466.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:46.885Z,1509669466.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:47.247Z,1509669467.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:47.290Z,1509669467.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:47.656Z,1509669467.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:47.673Z,1509669467.673 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T00:37:47.698Z,1509669467.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:48.069Z,1509669468.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:48.084Z,1509669468.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:48.475Z,1509669468.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:48.491Z,1509669468.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:48.857Z,1509669468.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:48.886Z,1509669468.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:49.246Z,1509669469.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:49.283Z,1509669469.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:49.650Z,1509669469.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:49.685Z,1509669469.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:50.046Z,1509669470.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:50.135Z,1509669470.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:50.445Z,1509669470.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:50.481Z,1509669470.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:50.860Z,1509669470.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:50.889Z,1509669470.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:51.258Z,1509669471.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:51.288Z,1509669471.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:51.657Z,1509669471.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:51.691Z,1509669471.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:52.051Z,1509669472.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:52.062Z,1509669472.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T00:37:52.158Z,1509669472.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:52.449Z,1509669472.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:52.458Z,1509669472.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x51338 got:0x63751
2017-11-03T00:37:52.535Z,1509669472.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:52.853Z,1509669472.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:52.868Z,1509669472.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:53.249Z,1509669473.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:53.295Z,1509669473.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:53.664Z,1509669473.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:53.715Z,1509669473.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:54.064Z,1509669474.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:54.092Z,1509669474.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:54.458Z,1509669474.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:54.479Z,1509669474.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:54.852Z,1509669474.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:54.914Z,1509669474.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:55.250Z,1509669475.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:55.276Z,1509669475.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:55.653Z,1509669475.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:55.706Z,1509669475.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:55.740Z,1509669475.740 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:37:55.740Z,1509669475.740 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T00:37:55.740Z,1509669475.740 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:37:55.793Z,1509669475.793 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:37:56.058Z,1509669476.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:56.105Z,1509669476.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:37:56.106Z,1509669476.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:56.144Z,1509669476.144 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:37:56.339Z,1509669476.339 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:37:56.452Z,1509669476.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:56.499Z,1509669476.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:37:56.501Z,1509669476.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:56.867Z,1509669476.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:56.893Z,1509669476.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:37:56.894Z,1509669476.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:57.259Z,1509669477.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:57.291Z,1509669477.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:37:57.293Z,1509669477.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:57.662Z,1509669477.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:57.697Z,1509669477.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:37:57.698Z,1509669477.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:57.793Z,1509669477.793 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:37:57.793Z,1509669477.793 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T00:37:57.952Z,1509669477.952 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:37:57.953Z,1509669477.953 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:37:57.953Z,1509669477.953 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:37:57.953Z,1509669477.953 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:37:58.049Z,1509669478.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:58.085Z,1509669478.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:37:58.086Z,1509669478.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:58.452Z,1509669478.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:58.470Z,1509669478.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:37:58.471Z,1509669478.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:58.850Z,1509669478.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:58.867Z,1509669478.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:37:58.869Z,1509669478.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:59.250Z,1509669479.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:59.265Z,1509669479.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:37:59.266Z,1509669479.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:37:59.654Z,1509669479.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:37:59.692Z,1509669479.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:37:59.693Z,1509669479.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:00.064Z,1509669480.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:00.096Z,1509669480.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:38:00.101Z,1509669480.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:00.455Z,1509669480.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:00.470Z,1509669480.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:38:00.471Z,1509669480.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:00.855Z,1509669480.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:00.875Z,1509669480.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:38:00.876Z,1509669480.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:01.251Z,1509669481.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:01.295Z,1509669481.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:38:01.296Z,1509669481.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:01.650Z,1509669481.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:01.668Z,1509669481.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:38:01.669Z,1509669481.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:02.061Z,1509669482.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:02.098Z,1509669482.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:38:02.099Z,1509669482.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:02.206Z,1509669482.206 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:38:02.271Z,1509669482.271 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:38:02.273Z,1509669482.273 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:38:02.273Z,1509669482.273 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:38:02.274Z,1509669482.274 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:38:02.459Z,1509669482.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:02.476Z,1509669482.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:38:02.478Z,1509669482.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:02.867Z,1509669482.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:02.886Z,1509669482.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:03.267Z,1509669483.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:03.287Z,1509669483.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:03.670Z,1509669483.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:03.685Z,1509669483.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:04.048Z,1509669484.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:04.071Z,1509669484.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:04.444Z,1509669484.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:04.485Z,1509669484.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:04.854Z,1509669484.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:04.874Z,1509669484.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:05.260Z,1509669485.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:05.275Z,1509669485.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:05.664Z,1509669485.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:05.679Z,1509669485.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:06.062Z,1509669486.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:06.153Z,1509669486.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:06.468Z,1509669486.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:06.474Z,1509669486.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x29005 got:0x21021
2017-11-03T00:38:06.518Z,1509669486.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:06.861Z,1509669486.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:06.927Z,1509669486.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:07.261Z,1509669487.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:07.276Z,1509669487.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:10.561Z,1509669490.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:10.624Z,1509669490.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:10.736Z,1509669490.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:10.783Z,1509669490.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:11.157Z,1509669491.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:11.214Z,1509669491.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:11.562Z,1509669491.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:11.577Z,1509669491.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:11.957Z,1509669491.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:12.014Z,1509669492.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:12.335Z,1509669492.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:12.407Z,1509669492.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:12.738Z,1509669492.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:12.765Z,1509669492.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:13.139Z,1509669493.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:13.165Z,1509669493.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:13.557Z,1509669493.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:13.573Z,1509669493.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:13.962Z,1509669493.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:13.977Z,1509669493.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:14.358Z,1509669494.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:14.373Z,1509669494.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:14.737Z,1509669494.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:14.771Z,1509669494.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:15.139Z,1509669495.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:15.166Z,1509669495.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:15.553Z,1509669495.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:15.568Z,1509669495.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:15.957Z,1509669495.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:15.972Z,1509669495.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:16.389Z,1509669496.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:16.440Z,1509669496.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:16.740Z,1509669496.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:16.775Z,1509669496.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:17.136Z,1509669497.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:17.170Z,1509669497.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:17.562Z,1509669497.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:17.577Z,1509669497.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:17.945Z,1509669497.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:17.979Z,1509669497.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:18.357Z,1509669498.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:18.373Z,1509669498.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:18.748Z,1509669498.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:18.773Z,1509669498.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:19.136Z,1509669499.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:19.168Z,1509669499.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:19.549Z,1509669499.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:19.583Z,1509669499.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:19.950Z,1509669499.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:19.976Z,1509669499.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:20.350Z,1509669500.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:20.375Z,1509669500.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:20.738Z,1509669500.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:20.775Z,1509669500.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:21.139Z,1509669501.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:21.155Z,1509669501.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:21.550Z,1509669501.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:21.580Z,1509669501.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:21.958Z,1509669501.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:21.991Z,1509669501.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:22.354Z,1509669502.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:22.377Z,1509669502.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:22.740Z,1509669502.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:22.798Z,1509669502.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:23.139Z,1509669503.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:23.155Z,1509669503.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:23.558Z,1509669503.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:23.582Z,1509669503.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:23.953Z,1509669503.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:23.984Z,1509669503.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:24.362Z,1509669504.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:24.395Z,1509669504.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:24.745Z,1509669504.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:24.802Z,1509669504.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:25.140Z,1509669505.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:25.163Z,1509669505.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:25.554Z,1509669505.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:25.589Z,1509669505.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:25.958Z,1509669505.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:26.007Z,1509669506.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:26.362Z,1509669506.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:26.391Z,1509669506.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:26.740Z,1509669506.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:26.795Z,1509669506.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:27.139Z,1509669507.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:27.155Z,1509669507.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:27.545Z,1509669507.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:27.589Z,1509669507.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:27.953Z,1509669507.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:27.985Z,1509669507.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:28.357Z,1509669508.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:28.387Z,1509669508.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:28.740Z,1509669508.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:28.763Z,1509669508.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:29.144Z,1509669509.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:29.159Z,1509669509.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:29.545Z,1509669509.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:29.560Z,1509669509.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:29.953Z,1509669509.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:29.984Z,1509669509.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:30.394Z,1509669510.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:30.437Z,1509669510.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:30.740Z,1509669510.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:30.755Z,1509669510.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:31.139Z,1509669511.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:31.155Z,1509669511.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:31.553Z,1509669511.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:31.585Z,1509669511.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:31.956Z,1509669511.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:31.971Z,1509669511.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:32.358Z,1509669512.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:32.389Z,1509669512.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:32.747Z,1509669512.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:32.763Z,1509669512.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:33.146Z,1509669513.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:33.161Z,1509669513.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:33.558Z,1509669513.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:33.589Z,1509669513.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:33.958Z,1509669513.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:33.989Z,1509669513.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:34.357Z,1509669514.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:34.390Z,1509669514.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:34.749Z,1509669514.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:34.765Z,1509669514.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:35.145Z,1509669515.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:35.160Z,1509669515.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:35.557Z,1509669515.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:35.592Z,1509669515.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:35.958Z,1509669515.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:35.989Z,1509669515.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:36.347Z,1509669516.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:36.363Z,1509669516.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:36.746Z,1509669516.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:36.761Z,1509669516.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:37.144Z,1509669517.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:37.160Z,1509669517.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:37.550Z,1509669517.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:37.571Z,1509669517.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:37.958Z,1509669517.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:37.991Z,1509669517.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:38.350Z,1509669518.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:38.367Z,1509669518.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:38.744Z,1509669518.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:38.806Z,1509669518.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:39.143Z,1509669519.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:39.206Z,1509669519.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:39.557Z,1509669519.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:39.593Z,1509669519.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:39.957Z,1509669519.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:39.989Z,1509669519.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:40.350Z,1509669520.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:40.398Z,1509669520.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:40.745Z,1509669520.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:40.760Z,1509669520.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:41.142Z,1509669521.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:41.191Z,1509669521.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:41.557Z,1509669521.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:41.610Z,1509669521.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:41.949Z,1509669521.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:41.971Z,1509669521.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:42.362Z,1509669522.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:42.393Z,1509669522.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:42.745Z,1509669522.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:42.760Z,1509669522.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:43.144Z,1509669523.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:43.159Z,1509669523.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:43.549Z,1509669523.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:43.571Z,1509669523.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:43.958Z,1509669523.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:43.990Z,1509669523.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:44.355Z,1509669524.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:44.414Z,1509669524.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:44.745Z,1509669524.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:44.760Z,1509669524.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:45.148Z,1509669525.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:45.170Z,1509669525.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:45.550Z,1509669525.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:45.571Z,1509669525.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:45.950Z,1509669525.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:45.965Z,1509669525.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:46.354Z,1509669526.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:46.369Z,1509669526.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:46.749Z,1509669526.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:46.806Z,1509669526.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:47.145Z,1509669527.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:47.160Z,1509669527.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:47.553Z,1509669527.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:47.575Z,1509669527.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:47.954Z,1509669527.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:47.975Z,1509669527.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:48.352Z,1509669528.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:48.367Z,1509669528.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:48.748Z,1509669528.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:48.768Z,1509669528.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:49.147Z,1509669529.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:49.167Z,1509669529.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:49.552Z,1509669529.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:49.567Z,1509669529.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:49.953Z,1509669529.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:49.968Z,1509669529.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:49.968Z,1509669529.968 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2017-11-03T00:38:49.968Z,1509669529.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:38:49.970Z,1509669529.970 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:49.970Z,1509669529.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2017-11-03T00:38:49.970Z,1509669529.970 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:38:49.972Z,1509669529.972 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:49.972Z,1509669529.972 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-11-03T00:38:49.973Z,1509669529.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:38:50.121Z,1509669530.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:38:50.121Z,1509669530.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:38:50.122Z,1509669530.122 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:38:50.355Z,1509669530.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:50.448Z,1509669530.448 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:38:50.449Z,1509669530.449 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2017-11-03T00:38:50.449Z,1509669530.449 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:38:50.449Z,1509669530.449 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2017-11-03T00:38:50.450Z,1509669530.450 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:38:50.450Z,1509669530.450 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-11-03T00:38:50.751Z,1509669530.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:50.770Z,1509669530.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:38:50.770Z,1509669530.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:38:50.770Z,1509669530.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:38:50.771Z,1509669530.771 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:38:50.771Z,1509669530.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:38:50.772Z,1509669530.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:38:50.772Z,1509669530.772 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:38:50.773Z,1509669530.773 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:38:50.773Z,1509669530.773 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:38:51.135Z,1509669531.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:51.167Z,1509669531.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:51.557Z,1509669531.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:51.573Z,1509669531.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:51.955Z,1509669531.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:51.971Z,1509669531.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:52.369Z,1509669532.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:52.384Z,1509669532.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:52.739Z,1509669532.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:52.764Z,1509669532.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:53.139Z,1509669533.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:53.164Z,1509669533.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:53.561Z,1509669533.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:53.582Z,1509669533.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:53.961Z,1509669533.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:54.026Z,1509669534.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:54.353Z,1509669534.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:54.369Z,1509669534.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:54.738Z,1509669534.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:54.764Z,1509669534.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:55.136Z,1509669535.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:55.200Z,1509669535.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:55.557Z,1509669535.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:55.572Z,1509669535.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:55.954Z,1509669535.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:55.991Z,1509669535.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:56.358Z,1509669536.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:56.414Z,1509669536.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:56.743Z,1509669536.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:56.778Z,1509669536.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:57.137Z,1509669537.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:57.152Z,1509669537.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:57.549Z,1509669537.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:57.576Z,1509669537.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:57.949Z,1509669537.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:57.976Z,1509669537.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:58.371Z,1509669538.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:58.426Z,1509669538.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:58.738Z,1509669538.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:58.753Z,1509669538.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:59.136Z,1509669539.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:59.151Z,1509669539.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:59.549Z,1509669539.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:59.578Z,1509669539.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:38:59.949Z,1509669539.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:38:59.976Z,1509669539.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:00.349Z,1509669540.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:00.376Z,1509669540.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:00.742Z,1509669540.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:00.777Z,1509669540.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:01.137Z,1509669541.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:01.152Z,1509669541.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:01.550Z,1509669541.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:01.579Z,1509669541.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:01.965Z,1509669541.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:01.980Z,1509669541.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:02.350Z,1509669542.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:02.374Z,1509669542.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:02.752Z,1509669542.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:02.776Z,1509669542.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:03.136Z,1509669543.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:03.152Z,1509669543.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:03.549Z,1509669543.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:03.579Z,1509669543.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:03.953Z,1509669543.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:03.980Z,1509669543.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:04.353Z,1509669544.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:04.382Z,1509669544.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:04.738Z,1509669544.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:04.753Z,1509669544.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:05.143Z,1509669545.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:05.177Z,1509669545.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:05.553Z,1509669545.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:05.583Z,1509669545.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:05.964Z,1509669545.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:05.987Z,1509669545.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:06.367Z,1509669546.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:06.387Z,1509669546.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:06.737Z,1509669546.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:06.779Z,1509669546.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:07.136Z,1509669547.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:07.151Z,1509669547.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:07.554Z,1509669547.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:07.583Z,1509669547.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:10.811Z,1509669550.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:10.899Z,1509669550.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:11.042Z,1509669551.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:11.057Z,1509669551.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:11.435Z,1509669551.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:11.455Z,1509669551.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:11.837Z,1509669551.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:11.852Z,1509669551.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:12.238Z,1509669552.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:12.283Z,1509669552.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:12.649Z,1509669552.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:12.679Z,1509669552.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:13.038Z,1509669553.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:13.076Z,1509669553.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:13.442Z,1509669553.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:13.495Z,1509669553.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:13.836Z,1509669553.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:13.851Z,1509669553.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:14.236Z,1509669554.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:14.251Z,1509669554.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:14.671Z,1509669554.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:14.733Z,1509669554.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:15.036Z,1509669555.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:15.052Z,1509669555.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:15.435Z,1509669555.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:15.450Z,1509669555.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:15.842Z,1509669555.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:15.857Z,1509669555.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:16.249Z,1509669556.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:16.279Z,1509669556.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:16.651Z,1509669556.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:16.737Z,1509669556.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:17.036Z,1509669557.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:17.051Z,1509669557.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:17.436Z,1509669557.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:17.451Z,1509669557.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:17.836Z,1509669557.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:17.851Z,1509669557.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:18.240Z,1509669558.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:18.255Z,1509669558.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:18.641Z,1509669558.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:18.706Z,1509669558.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:19.052Z,1509669559.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:19.067Z,1509669559.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:19.441Z,1509669559.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:19.463Z,1509669559.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:19.856Z,1509669559.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:19.875Z,1509669559.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:20.234Z,1509669560.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:20.249Z,1509669560.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:20.635Z,1509669560.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:20.650Z,1509669560.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:21.036Z,1509669561.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:21.059Z,1509669561.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:21.433Z,1509669561.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:21.447Z,1509669561.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:21.841Z,1509669561.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:21.857Z,1509669561.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:22.241Z,1509669562.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:22.256Z,1509669562.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:22.642Z,1509669562.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:22.657Z,1509669562.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:23.035Z,1509669563.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:23.050Z,1509669563.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:23.434Z,1509669563.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:23.453Z,1509669563.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:23.836Z,1509669563.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:23.858Z,1509669563.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:24.260Z,1509669564.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:24.282Z,1509669564.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:24.642Z,1509669564.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:24.657Z,1509669564.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:25.049Z,1509669565.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:25.076Z,1509669565.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:25.442Z,1509669565.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:25.502Z,1509669565.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:25.836Z,1509669565.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:25.851Z,1509669565.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:26.241Z,1509669566.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:26.256Z,1509669566.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:26.635Z,1509669566.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:26.691Z,1509669566.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:27.037Z,1509669567.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:27.052Z,1509669567.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:27.439Z,1509669567.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:27.483Z,1509669567.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:27.842Z,1509669567.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:27.891Z,1509669567.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:28.245Z,1509669568.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:28.261Z,1509669568.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:28.694Z,1509669568.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:28.743Z,1509669568.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:29.038Z,1509669569.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:29.054Z,1509669569.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:29.438Z,1509669569.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:29.453Z,1509669569.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:29.835Z,1509669569.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:29.850Z,1509669569.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:30.238Z,1509669570.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:30.253Z,1509669570.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:30.662Z,1509669570.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:30.731Z,1509669570.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:31.046Z,1509669571.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:31.061Z,1509669571.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:31.442Z,1509669571.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:31.457Z,1509669571.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:31.836Z,1509669571.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:31.851Z,1509669571.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:32.235Z,1509669572.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:32.254Z,1509669572.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:32.636Z,1509669572.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:32.651Z,1509669572.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:33.037Z,1509669573.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:33.052Z,1509669573.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:33.436Z,1509669573.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:33.451Z,1509669573.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:33.842Z,1509669573.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:33.857Z,1509669573.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:34.241Z,1509669574.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:34.257Z,1509669574.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:34.642Z,1509669574.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:34.657Z,1509669574.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:35.038Z,1509669575.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:35.053Z,1509669575.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:35.436Z,1509669575.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:35.451Z,1509669575.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:35.839Z,1509669575.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:35.854Z,1509669575.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:36.240Z,1509669576.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:36.255Z,1509669576.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:36.641Z,1509669576.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:36.657Z,1509669576.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:37.042Z,1509669577.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:37.057Z,1509669577.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:37.442Z,1509669577.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:37.457Z,1509669577.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:37.836Z,1509669577.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:37.851Z,1509669577.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:38.259Z,1509669578.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:38.297Z,1509669578.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:38.633Z,1509669578.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:38.691Z,1509669578.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:39.038Z,1509669579.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:39.053Z,1509669579.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:39.441Z,1509669579.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:39.456Z,1509669579.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:39.844Z,1509669579.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:39.863Z,1509669579.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:40.245Z,1509669580.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:40.313Z,1509669580.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:40.653Z,1509669580.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:40.669Z,1509669580.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:41.034Z,1509669581.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:41.094Z,1509669581.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:41.436Z,1509669581.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:41.455Z,1509669581.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:41.841Z,1509669581.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:41.898Z,1509669581.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:42.223Z,1509669582.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:42.271Z,1509669582.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:42.669Z,1509669582.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:42.714Z,1509669582.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:43.050Z,1509669583.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:43.070Z,1509669583.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:43.449Z,1509669583.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:43.471Z,1509669583.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:43.828Z,1509669583.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:43.854Z,1509669583.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:44.231Z,1509669584.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:44.256Z,1509669584.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:44.621Z,1509669584.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:44.672Z,1509669584.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:45.029Z,1509669585.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:45.045Z,1509669585.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:45.429Z,1509669585.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:45.444Z,1509669585.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:45.841Z,1509669585.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:45.866Z,1509669585.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:46.241Z,1509669586.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:46.266Z,1509669586.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:46.641Z,1509669586.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:46.667Z,1509669586.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:47.028Z,1509669587.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:47.043Z,1509669587.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:47.431Z,1509669587.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:47.447Z,1509669587.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:47.828Z,1509669587.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:47.843Z,1509669587.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:48.247Z,1509669588.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:48.275Z,1509669588.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:48.646Z,1509669588.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:48.669Z,1509669588.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:49.046Z,1509669589.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:49.070Z,1509669589.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:49.445Z,1509669589.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:49.469Z,1509669589.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:49.832Z,1509669589.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:49.847Z,1509669589.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:50.247Z,1509669590.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:50.272Z,1509669590.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:50.635Z,1509669590.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:50.674Z,1509669590.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:51.033Z,1509669591.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:51.048Z,1509669591.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:51.433Z,1509669591.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:51.448Z,1509669591.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:51.841Z,1509669591.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:51.873Z,1509669591.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:52.278Z,1509669592.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:52.294Z,1509669592.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:52.646Z,1509669592.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:52.679Z,1509669592.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:53.035Z,1509669593.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:53.086Z,1509669593.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:53.433Z,1509669593.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:53.448Z,1509669593.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:53.841Z,1509669593.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:53.855Z,1509669593.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:54.239Z,1509669594.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:54.302Z,1509669594.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:54.644Z,1509669594.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:54.660Z,1509669594.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:55.048Z,1509669595.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:55.063Z,1509669595.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:55.448Z,1509669595.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:55.499Z,1509669595.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:55.836Z,1509669595.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:55.851Z,1509669595.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:56.240Z,1509669596.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:56.298Z,1509669596.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:56.663Z,1509669596.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:56.741Z,1509669596.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:57.037Z,1509669597.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:57.052Z,1509669597.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:57.438Z,1509669597.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:57.453Z,1509669597.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:57.848Z,1509669597.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:57.863Z,1509669597.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:58.248Z,1509669598.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:58.271Z,1509669598.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:58.301Z,1509669598.301 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:39:58.301Z,1509669598.301 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T00:39:58.301Z,1509669598.301 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:39:58.377Z,1509669598.377 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:39:58.673Z,1509669598.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:58.704Z,1509669598.704 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:39:58.766Z,1509669598.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T00:39:58.767Z,1509669598.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:58.895Z,1509669598.895 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:39:59.034Z,1509669599.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:59.049Z,1509669599.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:39:59.050Z,1509669599.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:59.432Z,1509669599.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:59.447Z,1509669599.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:39:59.448Z,1509669599.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:39:59.836Z,1509669599.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:39:59.850Z,1509669599.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:39:59.851Z,1509669599.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:00.221Z,1509669600.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:00.248Z,1509669600.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:40:00.249Z,1509669600.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:00.336Z,1509669600.336 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:40:00.337Z,1509669600.337 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T00:40:00.508Z,1509669600.508 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:40:00.509Z,1509669600.509 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:40:00.509Z,1509669600.509 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:40:00.509Z,1509669600.509 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:40:00.645Z,1509669600.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:00.661Z,1509669600.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:40:00.662Z,1509669600.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:01.048Z,1509669601.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:01.063Z,1509669601.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:40:01.064Z,1509669601.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:01.445Z,1509669601.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:01.459Z,1509669601.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:40:01.461Z,1509669601.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:01.836Z,1509669601.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:01.851Z,1509669601.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:40:01.852Z,1509669601.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:02.237Z,1509669602.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:02.251Z,1509669602.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:40:02.253Z,1509669602.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:02.636Z,1509669602.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:02.651Z,1509669602.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:40:02.652Z,1509669602.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:03.037Z,1509669603.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:03.052Z,1509669603.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:40:03.053Z,1509669603.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:03.437Z,1509669603.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:03.451Z,1509669603.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:40:03.452Z,1509669603.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:03.849Z,1509669603.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:03.864Z,1509669603.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:40:03.865Z,1509669603.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:04.248Z,1509669604.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:04.263Z,1509669604.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:40:04.264Z,1509669604.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:04.670Z,1509669604.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:04.696Z,1509669604.696 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:40:04.752Z,1509669604.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T00:40:04.757Z,1509669604.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:04.815Z,1509669604.815 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:40:04.816Z,1509669604.816 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:40:04.817Z,1509669604.817 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:40:04.817Z,1509669604.817 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:40:05.043Z,1509669605.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:05.062Z,1509669605.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:40:05.063Z,1509669605.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:05.429Z,1509669605.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:05.444Z,1509669605.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:05.840Z,1509669605.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:05.865Z,1509669605.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:06.228Z,1509669606.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:06.243Z,1509669606.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:06.641Z,1509669606.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:06.668Z,1509669606.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:07.041Z,1509669607.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:07.069Z,1509669607.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:07.442Z,1509669607.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:07.495Z,1509669607.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:07.829Z,1509669607.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:07.845Z,1509669607.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:10.955Z,1509669610.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:10.992Z,1509669610.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:11.144Z,1509669611.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:11.222Z,1509669611.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:11.565Z,1509669611.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:11.581Z,1509669611.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:11.977Z,1509669611.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:12.031Z,1509669612.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:12.356Z,1509669612.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:12.375Z,1509669612.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:12.753Z,1509669612.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:12.803Z,1509669612.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:13.154Z,1509669613.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:13.197Z,1509669613.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:13.557Z,1509669613.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:13.579Z,1509669613.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:13.965Z,1509669613.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:13.996Z,1509669613.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:14.374Z,1509669614.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:14.407Z,1509669614.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:14.751Z,1509669614.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:14.771Z,1509669614.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:15.154Z,1509669615.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:15.169Z,1509669615.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:15.557Z,1509669615.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:15.573Z,1509669615.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:15.957Z,1509669615.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:15.972Z,1509669615.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:16.373Z,1509669616.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:16.404Z,1509669616.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:16.754Z,1509669616.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:16.769Z,1509669616.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:17.150Z,1509669617.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:17.165Z,1509669617.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:17.557Z,1509669617.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:17.573Z,1509669617.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:17.965Z,1509669617.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:17.996Z,1509669617.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:18.350Z,1509669618.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:18.365Z,1509669618.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:18.753Z,1509669618.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:18.768Z,1509669618.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:19.150Z,1509669619.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:19.165Z,1509669619.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:19.566Z,1509669619.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:19.597Z,1509669619.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:19.958Z,1509669619.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:19.973Z,1509669619.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:20.358Z,1509669620.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:20.382Z,1509669620.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:20.755Z,1509669620.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:20.779Z,1509669620.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:21.152Z,1509669621.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:21.168Z,1509669621.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:21.557Z,1509669621.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:21.573Z,1509669621.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:21.962Z,1509669621.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:21.978Z,1509669621.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:22.377Z,1509669622.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:22.406Z,1509669622.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:22.754Z,1509669622.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:22.769Z,1509669622.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:23.142Z,1509669623.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:23.173Z,1509669623.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:23.560Z,1509669623.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:23.576Z,1509669623.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:23.960Z,1509669623.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:24.019Z,1509669624.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:24.411Z,1509669624.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:24.468Z,1509669624.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:24.752Z,1509669624.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:24.767Z,1509669624.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:25.154Z,1509669625.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:25.169Z,1509669625.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:25.548Z,1509669625.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:25.607Z,1509669625.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:25.953Z,1509669625.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:25.969Z,1509669625.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:26.355Z,1509669626.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:26.408Z,1509669626.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:26.766Z,1509669626.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:26.781Z,1509669626.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:27.165Z,1509669627.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:27.218Z,1509669627.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:27.564Z,1509669627.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:27.614Z,1509669627.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:27.953Z,1509669627.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:27.968Z,1509669627.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:28.352Z,1509669628.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:28.367Z,1509669628.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:28.752Z,1509669628.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:28.789Z,1509669628.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:29.156Z,1509669629.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:29.179Z,1509669629.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:29.565Z,1509669629.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:29.580Z,1509669629.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:29.970Z,1509669629.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:29.985Z,1509669629.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:30.357Z,1509669630.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:30.372Z,1509669630.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:30.754Z,1509669630.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:30.769Z,1509669630.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:31.157Z,1509669631.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:31.172Z,1509669631.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:31.562Z,1509669631.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:31.577Z,1509669631.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:31.968Z,1509669631.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:31.991Z,1509669631.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:32.370Z,1509669632.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:32.385Z,1509669632.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:32.757Z,1509669632.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:32.772Z,1509669632.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:33.152Z,1509669633.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:33.179Z,1509669633.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:33.569Z,1509669633.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:33.590Z,1509669633.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:33.970Z,1509669633.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:34.013Z,1509669634.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:34.365Z,1509669634.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:34.381Z,1509669634.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:34.755Z,1509669634.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:34.770Z,1509669634.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:35.154Z,1509669635.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:35.175Z,1509669635.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:35.565Z,1509669635.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:35.580Z,1509669635.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:35.965Z,1509669635.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:35.980Z,1509669635.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:36.365Z,1509669636.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:36.380Z,1509669636.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:36.753Z,1509669636.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:36.769Z,1509669636.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:37.155Z,1509669637.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:37.170Z,1509669637.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:37.565Z,1509669637.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:37.580Z,1509669637.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:37.965Z,1509669637.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:37.980Z,1509669637.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:38.387Z,1509669638.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:38.458Z,1509669638.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:38.744Z,1509669638.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:38.759Z,1509669638.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:39.144Z,1509669639.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:39.159Z,1509669639.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:39.554Z,1509669639.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:39.603Z,1509669639.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:39.960Z,1509669639.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:39.975Z,1509669639.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:40.362Z,1509669640.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:40.377Z,1509669640.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:40.758Z,1509669640.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:40.806Z,1509669640.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:41.156Z,1509669641.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:41.171Z,1509669641.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:41.560Z,1509669641.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:41.607Z,1509669641.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:41.963Z,1509669641.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:42.019Z,1509669642.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:42.361Z,1509669642.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:42.376Z,1509669642.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:42.757Z,1509669642.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:42.772Z,1509669642.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:43.154Z,1509669643.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:43.169Z,1509669643.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:43.560Z,1509669643.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:43.575Z,1509669643.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:43.962Z,1509669643.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:43.977Z,1509669643.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:44.360Z,1509669644.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:44.376Z,1509669644.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:44.753Z,1509669644.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:44.775Z,1509669644.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:45.152Z,1509669645.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:45.167Z,1509669645.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:45.561Z,1509669645.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:45.577Z,1509669645.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:45.961Z,1509669645.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:45.977Z,1509669645.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:46.373Z,1509669646.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:46.407Z,1509669646.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:46.754Z,1509669646.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:46.769Z,1509669646.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:47.148Z,1509669647.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:47.163Z,1509669647.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:47.560Z,1509669647.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:47.579Z,1509669647.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:47.961Z,1509669647.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:47.977Z,1509669647.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:48.360Z,1509669648.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:48.383Z,1509669648.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:48.753Z,1509669648.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:48.775Z,1509669648.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:49.153Z,1509669649.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:49.175Z,1509669649.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:49.560Z,1509669649.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:49.575Z,1509669649.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:49.960Z,1509669649.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:49.975Z,1509669649.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:50.373Z,1509669650.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:50.407Z,1509669650.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:50.755Z,1509669650.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:50.771Z,1509669650.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:51.144Z,1509669651.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:51.174Z,1509669651.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:51.562Z,1509669651.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:51.583Z,1509669651.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:51.960Z,1509669651.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:51.975Z,1509669651.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:52.399Z,1509669652.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:52.470Z,1509669652.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:52.754Z,1509669652.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:52.773Z,1509669652.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:53.140Z,1509669653.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:53.174Z,1509669653.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:53.563Z,1509669653.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:53.595Z,1509669653.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:53.967Z,1509669653.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:53.983Z,1509669653.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:54.363Z,1509669654.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:54.428Z,1509669654.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:54.766Z,1509669654.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:54.822Z,1509669654.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:55.154Z,1509669655.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:55.195Z,1509669655.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:55.573Z,1509669655.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:55.687Z,1509669655.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:55.960Z,1509669655.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:56.003Z,1509669656.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:56.359Z,1509669656.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:56.422Z,1509669656.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:56.758Z,1509669656.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:56.819Z,1509669656.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:57.152Z,1509669657.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:57.168Z,1509669657.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:57.561Z,1509669657.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:57.576Z,1509669657.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:57.980Z,1509669657.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:58.014Z,1509669658.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:58.386Z,1509669658.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:58.419Z,1509669658.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:58.754Z,1509669658.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:58.797Z,1509669658.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:59.153Z,1509669659.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:59.197Z,1509669659.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:59.568Z,1509669659.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:59.651Z,1509669659.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:40:59.963Z,1509669659.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:40:59.999Z,1509669659.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:00.356Z,1509669660.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:00.376Z,1509669660.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:00.790Z,1509669660.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:00.822Z,1509669660.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:01.153Z,1509669661.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:01.204Z,1509669661.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:01.597Z,1509669661.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:01.629Z,1509669661.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:01.959Z,1509669661.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:01.983Z,1509669661.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:02.367Z,1509669662.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:02.415Z,1509669662.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:02.754Z,1509669662.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:02.781Z,1509669662.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:03.165Z,1509669663.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:03.196Z,1509669663.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:03.563Z,1509669663.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:03.582Z,1509669663.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:03.968Z,1509669663.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:03.987Z,1509669663.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:04.362Z,1509669664.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:04.377Z,1509669664.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:04.747Z,1509669664.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:04.773Z,1509669664.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:05.144Z,1509669665.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:05.175Z,1509669665.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:05.566Z,1509669665.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:05.581Z,1509669665.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:05.966Z,1509669665.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:05.980Z,1509669665.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:06.392Z,1509669666.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:06.474Z,1509669666.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:06.749Z,1509669666.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:06.775Z,1509669666.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:06.779Z,1509669666.779 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T00:36:06.7Z
2017-11-03T00:41:06.779Z,1509669666.779 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T00:41:06.779Z,1509669666.779 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T00:41:07.144Z,1509669667.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:07.191Z,1509669667.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:07.671Z,1509669667.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:07.694Z,1509669667.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:07.970Z,1509669667.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:08.013Z,1509669668.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:11.223Z,1509669671.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:11.287Z,1509669671.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:11.380Z,1509669671.380 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0012.lzma
2017-11-03T00:41:11.402Z,1509669671.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:11.442Z,1509669671.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:11.804Z,1509669671.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:11.830Z,1509669671.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:12.179Z,1509669672.179 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0012.lzma.bak
2017-11-03T00:41:12.179Z,1509669672.179 [DataOverHttps](INFO): SBD MOMSN=5182296
2017-11-03T00:41:12.204Z,1509669672.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:12.245Z,1509669672.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:13.754Z,1509669673.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:13.816Z,1509669673.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:13.946Z,1509669673.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:13.986Z,1509669673.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:17.158Z,1509669677.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:17.206Z,1509669677.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:17.324Z,1509669677.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:17.371Z,1509669677.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:17.733Z,1509669677.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:17.747Z,1509669677.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:18.128Z,1509669678.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:18.142Z,1509669678.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:18.545Z,1509669678.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:18.561Z,1509669678.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:18.946Z,1509669678.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:18.963Z,1509669678.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:22.698Z,1509669682.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:22.720Z,1509669682.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:22.853Z,1509669682.853 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20171103T001125/Express0013.lzma
2017-11-03T00:41:22.877Z,1509669682.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:22.918Z,1509669682.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:23.275Z,1509669683.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:23.300Z,1509669683.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:23.655Z,1509669683.655 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0013.lzma.bak
2017-11-03T00:41:23.655Z,1509669683.655 [DataOverHttps](INFO): SBD MOMSN=5182298
2017-11-03T00:41:23.678Z,1509669683.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:23.719Z,1509669683.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:24.277Z,1509669684.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:24.300Z,1509669684.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:24.303Z,1509669684.303 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T00:41:24.303Z,1509669684.303 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T00:41:24.304Z,1509669684.304 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T00:41:24.478Z,1509669684.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:24.512Z,1509669684.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:27.926Z,1509669687.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:27.955Z,1509669687.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:28.139Z,1509669688.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:28.189Z,1509669688.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:28.510Z,1509669688.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:28.583Z,1509669688.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:28.896Z,1509669688.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:28.911Z,1509669688.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:29.300Z,1509669689.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:29.312Z,1509669689.312 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T00:41:29.312Z,1509669689.312 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:41:29.312Z,1509669689.312 [BPC1](ERROR): Data Fault
2017-11-03T00:41:29.348Z,1509669689.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:29.441Z,1509669689.441 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:41:29.703Z,1509669689.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:29.743Z,1509669689.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:30.115Z,1509669690.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:30.193Z,1509669690.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:30.500Z,1509669690.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:30.542Z,1509669690.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:30.632Z,1509669690.632 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:41:30.632Z,1509669690.632 [BPC1] No Fault, FailCount= 1
2017-11-03T00:41:30.913Z,1509669690.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:30.991Z,1509669690.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:31.316Z,1509669691.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:31.341Z,1509669691.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:31.713Z,1509669691.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:31.771Z,1509669691.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:32.100Z,1509669692.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:32.115Z,1509669692.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:32.508Z,1509669692.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:32.523Z,1509669692.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:32.905Z,1509669692.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:32.923Z,1509669692.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:33.305Z,1509669693.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:33.321Z,1509669693.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:33.713Z,1509669693.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:33.729Z,1509669693.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:34.110Z,1509669694.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:34.125Z,1509669694.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:34.509Z,1509669694.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:34.524Z,1509669694.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:34.906Z,1509669694.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:34.922Z,1509669694.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:35.305Z,1509669695.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:35.321Z,1509669695.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:35.705Z,1509669695.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:35.721Z,1509669695.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:36.106Z,1509669696.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:36.122Z,1509669696.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:36.504Z,1509669696.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:36.520Z,1509669696.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:36.923Z,1509669696.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:36.951Z,1509669696.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:37.309Z,1509669697.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:37.326Z,1509669697.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:37.429Z,1509669697.429 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T00:41:37.710Z,1509669697.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:37.731Z,1509669697.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:38.104Z,1509669698.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:38.123Z,1509669698.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:38.506Z,1509669698.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:38.521Z,1509669698.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:38.904Z,1509669698.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:38.920Z,1509669698.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:39.304Z,1509669699.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:39.320Z,1509669699.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:39.713Z,1509669699.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:39.729Z,1509669699.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:40.154Z,1509669700.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:40.190Z,1509669700.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:40.512Z,1509669700.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:40.535Z,1509669700.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:40.906Z,1509669700.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:40.922Z,1509669700.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:41.304Z,1509669701.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:41.320Z,1509669701.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:41.704Z,1509669701.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:41.720Z,1509669701.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:42.115Z,1509669702.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:42.172Z,1509669702.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:42.499Z,1509669702.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:42.531Z,1509669702.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:42.918Z,1509669702.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:42.933Z,1509669702.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:43.322Z,1509669703.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:43.337Z,1509669703.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:43.721Z,1509669703.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:43.788Z,1509669703.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:44.118Z,1509669704.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:44.187Z,1509669704.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:44.497Z,1509669704.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:44.525Z,1509669704.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:44.900Z,1509669704.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:44.966Z,1509669704.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:45.296Z,1509669705.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:45.323Z,1509669705.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:45.715Z,1509669705.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:45.767Z,1509669705.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:46.118Z,1509669706.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:46.219Z,1509669706.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:46.518Z,1509669706.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:46.533Z,1509669706.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:46.898Z,1509669706.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:46.926Z,1509669706.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:47.300Z,1509669707.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:47.331Z,1509669707.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:47.697Z,1509669707.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:47.731Z,1509669707.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:48.111Z,1509669708.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:48.126Z,1509669708.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:48.495Z,1509669708.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:48.522Z,1509669708.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:48.918Z,1509669708.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:48.933Z,1509669708.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:49.319Z,1509669709.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:49.334Z,1509669709.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:49.719Z,1509669709.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:49.734Z,1509669709.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:50.096Z,1509669710.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:50.123Z,1509669710.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:50.497Z,1509669710.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:50.525Z,1509669710.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:50.892Z,1509669710.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:50.922Z,1509669710.922 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:50.922Z,1509669710.922 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2017-11-03T00:41:50.922Z,1509669710.922 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:41:50.924Z,1509669710.924 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:50.925Z,1509669710.925 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2017-11-03T00:41:50.925Z,1509669710.925 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:41:50.927Z,1509669710.927 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:50.927Z,1509669710.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-11-03T00:41:50.927Z,1509669710.927 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:41:51.013Z,1509669711.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:41:51.014Z,1509669711.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:41:51.014Z,1509669711.014 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:41:51.295Z,1509669711.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:51.409Z,1509669711.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:41:51.409Z,1509669711.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2017-11-03T00:41:51.409Z,1509669711.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:41:51.409Z,1509669711.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2017-11-03T00:41:51.410Z,1509669711.410 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:41:51.410Z,1509669711.410 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-11-03T00:41:51.721Z,1509669711.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:51.736Z,1509669711.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:41:51.736Z,1509669711.736 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:41:51.737Z,1509669711.737 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:41:51.737Z,1509669711.737 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:41:51.738Z,1509669711.738 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:41:51.738Z,1509669711.738 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:41:51.738Z,1509669711.738 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:41:51.739Z,1509669711.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:41:51.739Z,1509669711.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:41:52.116Z,1509669712.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:52.132Z,1509669712.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:52.518Z,1509669712.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:52.533Z,1509669712.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:52.896Z,1509669712.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:52.972Z,1509669712.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:53.296Z,1509669713.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:53.328Z,1509669713.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:53.696Z,1509669713.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:53.727Z,1509669713.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:54.138Z,1509669714.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:54.173Z,1509669714.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:54.496Z,1509669714.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:54.511Z,1509669714.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:54.925Z,1509669714.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:54.941Z,1509669714.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:55.318Z,1509669715.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:55.333Z,1509669715.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:55.724Z,1509669715.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:55.739Z,1509669715.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:56.154Z,1509669716.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:56.178Z,1509669716.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:56.497Z,1509669716.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:56.512Z,1509669716.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:56.894Z,1509669716.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:56.910Z,1509669716.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:57.296Z,1509669717.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:57.320Z,1509669717.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:57.705Z,1509669717.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:57.721Z,1509669717.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:58.132Z,1509669718.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:58.195Z,1509669718.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:58.527Z,1509669718.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:58.567Z,1509669718.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:58.897Z,1509669718.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:58.913Z,1509669718.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:59.299Z,1509669719.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:59.374Z,1509669719.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:41:59.696Z,1509669719.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:41:59.719Z,1509669719.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:00.096Z,1509669720.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:00.135Z,1509669720.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:00.499Z,1509669720.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:00.547Z,1509669720.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:00.909Z,1509669720.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:00.925Z,1509669720.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:01.309Z,1509669721.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:01.330Z,1509669721.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:01.709Z,1509669721.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:01.725Z,1509669721.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:02.096Z,1509669722.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:02.119Z,1509669722.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:02.495Z,1509669722.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:02.537Z,1509669722.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:02.898Z,1509669722.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:02.930Z,1509669722.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:03.304Z,1509669723.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:03.323Z,1509669723.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:03.717Z,1509669723.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:03.732Z,1509669723.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:04.113Z,1509669724.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:04.135Z,1509669724.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:04.516Z,1509669724.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:04.531Z,1509669724.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:04.899Z,1509669724.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:04.922Z,1509669724.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:05.307Z,1509669725.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:05.322Z,1509669725.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:05.704Z,1509669725.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:05.720Z,1509669725.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:06.106Z,1509669726.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:06.122Z,1509669726.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:06.501Z,1509669726.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:06.517Z,1509669726.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:06.913Z,1509669726.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:06.935Z,1509669726.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:07.317Z,1509669727.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:07.332Z,1509669727.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:07.716Z,1509669727.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:07.732Z,1509669727.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:08.139Z,1509669728.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:08.174Z,1509669728.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:08.499Z,1509669728.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:08.531Z,1509669728.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:08.900Z,1509669728.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:08.931Z,1509669728.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:09.296Z,1509669729.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:09.327Z,1509669729.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:09.705Z,1509669729.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:09.738Z,1509669729.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:10.140Z,1509669730.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:10.186Z,1509669730.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:10.509Z,1509669730.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:10.536Z,1509669730.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:10.901Z,1509669730.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:10.936Z,1509669730.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:11.299Z,1509669731.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:11.341Z,1509669731.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:11.693Z,1509669731.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:11.715Z,1509669731.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:12.105Z,1509669732.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:12.180Z,1509669732.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:12.500Z,1509669732.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:12.582Z,1509669732.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:12.909Z,1509669732.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:12.941Z,1509669732.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:13.318Z,1509669733.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:13.350Z,1509669733.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:13.710Z,1509669733.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:13.759Z,1509669733.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:14.099Z,1509669734.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:14.119Z,1509669734.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:14.506Z,1509669734.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:14.566Z,1509669734.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:14.901Z,1509669734.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:14.962Z,1509669734.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:15.304Z,1509669735.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:15.320Z,1509669735.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:15.713Z,1509669735.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:15.730Z,1509669735.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:16.114Z,1509669736.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:16.135Z,1509669736.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:16.527Z,1509669736.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:16.561Z,1509669736.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:16.906Z,1509669736.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:16.921Z,1509669736.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:17.304Z,1509669737.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:17.319Z,1509669737.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:17.704Z,1509669737.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:17.720Z,1509669737.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:18.106Z,1509669738.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:18.122Z,1509669738.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:18.500Z,1509669738.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:18.515Z,1509669738.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:18.910Z,1509669738.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:18.939Z,1509669738.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:19.317Z,1509669739.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:19.332Z,1509669739.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:19.716Z,1509669739.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:19.732Z,1509669739.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:20.104Z,1509669740.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:20.120Z,1509669740.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:20.505Z,1509669740.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:20.520Z,1509669740.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:20.901Z,1509669740.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:20.922Z,1509669740.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:21.304Z,1509669741.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:21.319Z,1509669741.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:21.716Z,1509669741.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:21.731Z,1509669741.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:22.159Z,1509669742.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:22.189Z,1509669742.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:22.516Z,1509669742.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:22.532Z,1509669742.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:22.906Z,1509669742.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:22.921Z,1509669742.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:23.308Z,1509669743.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:23.324Z,1509669743.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:23.708Z,1509669743.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:23.724Z,1509669743.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:24.132Z,1509669744.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:24.202Z,1509669744.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:24.494Z,1509669744.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:24.522Z,1509669744.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:24.921Z,1509669744.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:24.943Z,1509669744.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:28.119Z,1509669748.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:28.227Z,1509669748.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:28.378Z,1509669748.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:28.416Z,1509669748.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:28.772Z,1509669748.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:28.823Z,1509669748.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:29.176Z,1509669749.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:29.190Z,1509669749.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:29.577Z,1509669749.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:29.622Z,1509669749.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:29.985Z,1509669749.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:30.035Z,1509669750.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:30.437Z,1509669750.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:30.476Z,1509669750.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:30.772Z,1509669750.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:30.787Z,1509669750.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:31.170Z,1509669751.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:31.185Z,1509669751.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:31.572Z,1509669751.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:31.587Z,1509669751.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:31.972Z,1509669751.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:31.987Z,1509669751.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:32.370Z,1509669752.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:32.388Z,1509669752.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:32.777Z,1509669752.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:32.793Z,1509669752.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:33.173Z,1509669753.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:33.189Z,1509669753.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:33.577Z,1509669753.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:33.593Z,1509669753.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:33.974Z,1509669753.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:33.989Z,1509669753.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:34.374Z,1509669754.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:34.389Z,1509669754.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:34.771Z,1509669754.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:34.786Z,1509669754.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:35.175Z,1509669755.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:35.190Z,1509669755.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:35.576Z,1509669755.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:35.591Z,1509669755.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:35.981Z,1509669755.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:35.996Z,1509669755.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:36.376Z,1509669756.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:36.398Z,1509669756.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:36.773Z,1509669756.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:36.788Z,1509669756.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:37.173Z,1509669757.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:37.188Z,1509669757.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:37.581Z,1509669757.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:37.596Z,1509669757.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:37.978Z,1509669757.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:37.993Z,1509669757.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:38.393Z,1509669758.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:38.423Z,1509669758.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:38.776Z,1509669758.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:38.795Z,1509669758.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:39.176Z,1509669759.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:39.195Z,1509669759.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:39.573Z,1509669759.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:39.588Z,1509669759.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:39.967Z,1509669759.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:39.982Z,1509669759.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:40.375Z,1509669760.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:40.395Z,1509669760.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:40.787Z,1509669760.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:40.810Z,1509669760.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:41.180Z,1509669761.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:41.207Z,1509669761.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:41.578Z,1509669761.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:41.611Z,1509669761.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:41.967Z,1509669761.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:42.021Z,1509669762.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:42.372Z,1509669762.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:42.430Z,1509669762.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:42.764Z,1509669762.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:42.780Z,1509669762.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:43.164Z,1509669763.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:43.219Z,1509669763.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:43.577Z,1509669763.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:43.608Z,1509669763.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:43.977Z,1509669763.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:44.023Z,1509669764.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:44.408Z,1509669764.408 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:42:44.408Z,1509669764.408 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T00:42:44.408Z,1509669764.408 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:42:44.433Z,1509669764.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:44.486Z,1509669764.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T00:42:44.487Z,1509669764.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:44.581Z,1509669764.581 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:42:44.581Z,1509669764.581 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T00:42:44.772Z,1509669764.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:44.794Z,1509669764.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:42:44.795Z,1509669764.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:44.812Z,1509669764.812 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:42:44.982Z,1509669764.982 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:42:45.172Z,1509669765.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:45.195Z,1509669765.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:42:45.196Z,1509669765.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:45.575Z,1509669765.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:45.590Z,1509669765.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:42:45.591Z,1509669765.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:45.977Z,1509669765.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:45.998Z,1509669765.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:42:45.999Z,1509669765.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:46.372Z,1509669766.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:46.388Z,1509669766.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:42:46.389Z,1509669766.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:46.784Z,1509669766.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:46.799Z,1509669766.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:42:46.801Z,1509669766.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:47.184Z,1509669767.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:47.199Z,1509669767.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:42:47.200Z,1509669767.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:47.584Z,1509669767.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:47.606Z,1509669767.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:42:47.607Z,1509669767.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:47.975Z,1509669767.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:47.994Z,1509669767.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:42:47.995Z,1509669767.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:48.375Z,1509669768.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:48.390Z,1509669768.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:42:48.391Z,1509669768.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:48.776Z,1509669768.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:48.791Z,1509669768.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:42:48.792Z,1509669768.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:49.175Z,1509669769.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:49.189Z,1509669769.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:42:49.190Z,1509669769.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:49.585Z,1509669769.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:49.599Z,1509669769.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:42:49.600Z,1509669769.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:49.986Z,1509669769.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:49.000Z,1509669770.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:42:50.001Z,1509669770.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:50.384Z,1509669770.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:50.398Z,1509669770.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:42:50.399Z,1509669770.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:50.776Z,1509669770.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:50.804Z,1509669770.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:42:50.805Z,1509669770.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:51.169Z,1509669771.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:51.188Z,1509669771.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:42:51.189Z,1509669771.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:51.584Z,1509669771.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:51.606Z,1509669771.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T00:42:51.607Z,1509669771.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:51.985Z,1509669771.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:52.006Z,1509669772.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:42:52.007Z,1509669772.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:52.385Z,1509669772.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:52.400Z,1509669772.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:42:52.401Z,1509669772.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:52.774Z,1509669772.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:52.789Z,1509669772.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:42:52.790Z,1509669772.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:53.176Z,1509669773.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:53.191Z,1509669773.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:42:53.192Z,1509669773.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:53.585Z,1509669773.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:53.600Z,1509669773.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:42:53.601Z,1509669773.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:53.984Z,1509669773.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:53.999Z,1509669773.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:42:53.000Z,1509669774.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:54.385Z,1509669774.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:54.406Z,1509669774.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:42:54.407Z,1509669774.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:54.774Z,1509669774.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:54.789Z,1509669774.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T00:42:54.790Z,1509669774.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:55.173Z,1509669775.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:55.188Z,1509669775.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T00:42:55.190Z,1509669775.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:55.585Z,1509669775.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:55.606Z,1509669775.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T00:42:55.607Z,1509669775.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:55.984Z,1509669775.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:55.000Z,1509669776.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T00:42:56.001Z,1509669776.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:56.385Z,1509669776.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:56.455Z,1509669776.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T00:42:56.457Z,1509669776.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:56.774Z,1509669776.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:56.828Z,1509669776.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T00:42:56.829Z,1509669776.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:57.161Z,1509669777.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:57.194Z,1509669777.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T00:42:57.195Z,1509669777.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:57.585Z,1509669777.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:57.641Z,1509669777.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T00:42:57.642Z,1509669777.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:57.988Z,1509669777.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:58.010Z,1509669778.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T00:42:58.011Z,1509669778.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:58.381Z,1509669778.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:58.441Z,1509669778.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T00:42:58.442Z,1509669778.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:58.775Z,1509669778.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:58.831Z,1509669778.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T00:42:58.832Z,1509669778.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:59.176Z,1509669779.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:59.190Z,1509669779.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:42:59.191Z,1509669779.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:59.582Z,1509669779.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:42:59.597Z,1509669779.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T00:42:59.598Z,1509669779.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:42:59.989Z,1509669779.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:00.004Z,1509669780.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T00:43:00.005Z,1509669780.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:00.389Z,1509669780.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:00.403Z,1509669780.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T00:43:00.404Z,1509669780.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:00.762Z,1509669780.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:00.787Z,1509669780.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T00:43:00.789Z,1509669780.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:01.175Z,1509669781.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:01.194Z,1509669781.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T00:43:01.195Z,1509669781.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:01.589Z,1509669781.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:01.603Z,1509669781.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T00:43:01.604Z,1509669781.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:01.980Z,1509669781.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:01.995Z,1509669781.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T00:43:01.997Z,1509669781.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:02.384Z,1509669782.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:02.399Z,1509669782.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T00:43:02.401Z,1509669782.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:02.768Z,1509669782.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:02.793Z,1509669782.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T00:43:02.794Z,1509669782.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:03.157Z,1509669783.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:03.179Z,1509669783.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T00:43:03.185Z,1509669783.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:03.585Z,1509669783.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:03.599Z,1509669783.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T00:43:03.601Z,1509669783.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:03.989Z,1509669783.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:04.003Z,1509669784.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T00:43:04.004Z,1509669784.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:04.381Z,1509669784.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:04.397Z,1509669784.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:04.768Z,1509669784.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:04.793Z,1509669784.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:05.167Z,1509669785.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:05.192Z,1509669785.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:05.581Z,1509669785.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:05.597Z,1509669785.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:05.989Z,1509669785.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:06.005Z,1509669786.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:06.389Z,1509669786.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:06.410Z,1509669786.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:06.768Z,1509669786.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:06.794Z,1509669786.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:07.167Z,1509669787.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:07.192Z,1509669787.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:07.590Z,1509669787.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:07.605Z,1509669787.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:07.983Z,1509669787.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:08.010Z,1509669788.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:08.377Z,1509669788.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:08.404Z,1509669788.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:08.765Z,1509669788.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:08.779Z,1509669788.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:09.164Z,1509669789.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:09.179Z,1509669789.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:09.577Z,1509669789.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:09.604Z,1509669789.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:09.977Z,1509669789.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:10.010Z,1509669790.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:10.377Z,1509669790.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:10.403Z,1509669790.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:10.765Z,1509669790.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:10.842Z,1509669790.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:11.163Z,1509669791.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:11.178Z,1509669791.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:11.577Z,1509669791.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:11.623Z,1509669791.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:11.977Z,1509669791.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:12.008Z,1509669792.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:12.385Z,1509669792.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:12.435Z,1509669792.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:12.764Z,1509669792.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:12.779Z,1509669792.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:13.168Z,1509669793.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:13.222Z,1509669793.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:13.581Z,1509669793.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:13.612Z,1509669793.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:13.985Z,1509669793.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:14.010Z,1509669794.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:14.381Z,1509669794.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:14.413Z,1509669794.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:14.769Z,1509669794.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:14.790Z,1509669794.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:15.171Z,1509669795.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:15.191Z,1509669795.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:15.582Z,1509669795.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:15.612Z,1509669795.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:15.985Z,1509669795.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:16.010Z,1509669796.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:16.377Z,1509669796.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:16.413Z,1509669796.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:16.769Z,1509669796.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:16.784Z,1509669796.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:17.168Z,1509669797.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:17.183Z,1509669797.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:17.577Z,1509669797.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:17.609Z,1509669797.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:17.981Z,1509669797.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:17.996Z,1509669797.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:18.381Z,1509669798.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:18.413Z,1509669798.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:18.773Z,1509669798.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:18.792Z,1509669798.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:19.172Z,1509669799.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:19.187Z,1509669799.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:19.578Z,1509669799.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:19.593Z,1509669799.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:19.982Z,1509669799.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:20.012Z,1509669800.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:20.382Z,1509669800.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:20.413Z,1509669800.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:20.772Z,1509669800.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:20.787Z,1509669800.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:21.167Z,1509669801.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:21.187Z,1509669801.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:21.581Z,1509669801.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:21.613Z,1509669801.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:21.981Z,1509669801.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:22.013Z,1509669802.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:22.382Z,1509669802.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:22.411Z,1509669802.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:22.768Z,1509669802.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:22.783Z,1509669802.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:23.168Z,1509669803.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:23.183Z,1509669803.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:23.573Z,1509669803.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:23.589Z,1509669803.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:23.981Z,1509669803.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:24.011Z,1509669804.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:24.381Z,1509669804.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:24.417Z,1509669804.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:24.770Z,1509669804.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:24.785Z,1509669804.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:25.173Z,1509669805.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:25.273Z,1509669805.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:28.274Z,1509669808.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:28.289Z,1509669808.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:28.437Z,1509669808.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:28.477Z,1509669808.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:28.834Z,1509669808.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:28.843Z,1509669808.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x26277 got:0x17074
2017-11-03T00:43:28.902Z,1509669808.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:29.224Z,1509669809.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:29.259Z,1509669809.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:29.608Z,1509669809.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:29.678Z,1509669809.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:30.021Z,1509669810.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:30.081Z,1509669810.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:30.409Z,1509669810.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:30.438Z,1509669810.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:30.833Z,1509669810.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:30.848Z,1509669810.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:31.233Z,1509669811.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:31.248Z,1509669811.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:31.636Z,1509669811.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:31.655Z,1509669811.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:32.015Z,1509669812.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:32.045Z,1509669812.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:32.412Z,1509669812.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:32.438Z,1509669812.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:32.816Z,1509669812.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:32.842Z,1509669812.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:33.208Z,1509669813.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:33.238Z,1509669813.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:33.635Z,1509669813.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:33.653Z,1509669813.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:34.038Z,1509669814.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:34.082Z,1509669814.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:34.434Z,1509669814.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:34.449Z,1509669814.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:34.812Z,1509669814.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:34.839Z,1509669814.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:35.210Z,1509669815.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:35.239Z,1509669815.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:35.612Z,1509669815.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:35.638Z,1509669815.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:36.026Z,1509669816.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:36.041Z,1509669816.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:36.416Z,1509669816.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:36.443Z,1509669816.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:36.842Z,1509669816.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:36.858Z,1509669816.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:37.234Z,1509669817.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:37.280Z,1509669817.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:37.630Z,1509669817.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:37.648Z,1509669817.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:38.015Z,1509669818.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:38.042Z,1509669818.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:38.412Z,1509669818.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:38.445Z,1509669818.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:38.816Z,1509669818.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:38.844Z,1509669818.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:39.215Z,1509669819.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:39.247Z,1509669819.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:39.635Z,1509669819.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:39.654Z,1509669819.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:40.041Z,1509669820.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:40.057Z,1509669820.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:40.434Z,1509669820.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:40.483Z,1509669820.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:40.813Z,1509669820.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:40.847Z,1509669820.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:41.216Z,1509669821.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:41.242Z,1509669821.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:41.616Z,1509669821.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:41.646Z,1509669821.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:42.013Z,1509669822.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:42.106Z,1509669822.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:42.412Z,1509669822.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:42.443Z,1509669822.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:42.801Z,1509669822.801 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T00:43:42.801Z,1509669822.801 [NAL9602] Data Fault, FailCount= 3
2017-11-03T00:43:42.801Z,1509669822.801 [NAL9602](ERROR): Data Fault
2017-11-03T00:43:42.818Z,1509669822.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:42.867Z,1509669822.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:42.964Z,1509669822.964 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T00:43:43.194Z,1509669823.194 [NAL9602](INFO): Powering down
2017-11-03T00:43:43.212Z,1509669823.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:43.283Z,1509669823.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:43.614Z,1509669823.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:43.639Z,1509669823.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:44.008Z,1509669824.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:44.062Z,1509669824.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:44.164Z,1509669824.164 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T00:43:44.165Z,1509669824.165 [NAL9602] No Fault, FailCount= 3
2017-11-03T00:43:44.415Z,1509669824.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:44.470Z,1509669824.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:44.808Z,1509669824.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:44.847Z,1509669824.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:45.208Z,1509669825.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:45.239Z,1509669825.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:45.614Z,1509669825.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:45.645Z,1509669825.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:46.014Z,1509669826.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:46.048Z,1509669826.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:46.408Z,1509669826.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:46.423Z,1509669826.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:46.814Z,1509669826.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:46.851Z,1509669826.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:47.208Z,1509669827.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:47.222Z,1509669827.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:47.608Z,1509669827.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:47.623Z,1509669827.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:48.008Z,1509669828.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:48.022Z,1509669828.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:48.414Z,1509669828.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:48.451Z,1509669828.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:48.838Z,1509669828.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:48.854Z,1509669828.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:49.212Z,1509669829.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:49.227Z,1509669829.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:49.608Z,1509669829.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:49.622Z,1509669829.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:50.014Z,1509669830.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:50.045Z,1509669830.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:50.412Z,1509669830.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:50.426Z,1509669830.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:50.808Z,1509669830.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:50.822Z,1509669830.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:51.212Z,1509669831.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:51.227Z,1509669831.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:51.612Z,1509669831.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:51.627Z,1509669831.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:52.008Z,1509669832.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:52.030Z,1509669832.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:52.411Z,1509669832.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:52.426Z,1509669832.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:52.818Z,1509669832.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:52.853Z,1509669832.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:53.211Z,1509669833.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:53.230Z,1509669833.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:53.611Z,1509669833.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:53.626Z,1509669833.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:54.012Z,1509669834.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:54.027Z,1509669834.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:54.411Z,1509669834.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:54.426Z,1509669834.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:54.851Z,1509669834.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:54.869Z,1509669834.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:55.215Z,1509669835.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:55.234Z,1509669835.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:55.611Z,1509669835.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:55.626Z,1509669835.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:56.016Z,1509669836.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:56.031Z,1509669836.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:56.418Z,1509669836.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:56.503Z,1509669836.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:56.815Z,1509669836.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:56.830Z,1509669836.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:57.216Z,1509669837.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:57.274Z,1509669837.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:57.615Z,1509669837.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:57.630Z,1509669837.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:58.015Z,1509669838.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:58.058Z,1509669838.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:58.416Z,1509669838.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:58.435Z,1509669838.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:58.815Z,1509669838.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:58.864Z,1509669838.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:59.215Z,1509669839.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:59.229Z,1509669839.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:43:59.616Z,1509669839.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:43:59.631Z,1509669839.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:00.015Z,1509669840.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:00.030Z,1509669840.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:00.424Z,1509669840.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:00.438Z,1509669840.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:00.816Z,1509669840.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:00.858Z,1509669840.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:01.216Z,1509669841.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:01.239Z,1509669841.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:01.615Z,1509669841.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:01.630Z,1509669841.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:02.016Z,1509669842.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:02.031Z,1509669842.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:02.416Z,1509669842.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:02.431Z,1509669842.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:02.815Z,1509669842.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:02.830Z,1509669842.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:03.215Z,1509669843.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:03.231Z,1509669843.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:03.619Z,1509669843.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:03.635Z,1509669843.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:04.015Z,1509669844.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:04.030Z,1509669844.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:04.419Z,1509669844.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:04.435Z,1509669844.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:04.815Z,1509669844.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:04.830Z,1509669844.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:05.214Z,1509669845.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:05.229Z,1509669845.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:05.615Z,1509669845.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:05.631Z,1509669845.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:06.020Z,1509669846.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:06.035Z,1509669846.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:06.415Z,1509669846.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:06.430Z,1509669846.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:06.816Z,1509669846.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:06.831Z,1509669846.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:07.215Z,1509669847.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:07.231Z,1509669847.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:07.615Z,1509669847.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:07.630Z,1509669847.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:08.016Z,1509669848.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:08.031Z,1509669848.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:08.415Z,1509669848.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:08.431Z,1509669848.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:08.819Z,1509669848.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:08.835Z,1509669848.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:09.215Z,1509669849.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:09.231Z,1509669849.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:09.615Z,1509669849.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:09.631Z,1509669849.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:10.020Z,1509669850.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:10.035Z,1509669850.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:10.416Z,1509669850.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:10.458Z,1509669850.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:10.816Z,1509669850.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:10.880Z,1509669850.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:11.216Z,1509669851.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:11.287Z,1509669851.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:11.616Z,1509669851.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:11.638Z,1509669851.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:12.017Z,1509669852.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:12.070Z,1509669852.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:12.416Z,1509669852.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:12.431Z,1509669852.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:12.816Z,1509669852.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:12.874Z,1509669852.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:13.199Z,1509669853.199 [NAL9602](INFO): Powering up NAL9602
2017-11-03T00:44:13.217Z,1509669853.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:13.275Z,1509669853.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:13.616Z,1509669853.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:13.631Z,1509669853.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:14.016Z,1509669854.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:14.031Z,1509669854.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:14.417Z,1509669854.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:14.432Z,1509669854.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:14.817Z,1509669854.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:14.832Z,1509669854.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:15.216Z,1509669855.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:15.231Z,1509669855.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:15.617Z,1509669855.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:15.632Z,1509669855.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:16.016Z,1509669856.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:16.031Z,1509669856.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:16.416Z,1509669856.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:16.431Z,1509669856.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:16.816Z,1509669856.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:16.843Z,1509669856.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:17.215Z,1509669857.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:17.231Z,1509669857.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:17.616Z,1509669857.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:17.632Z,1509669857.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:18.020Z,1509669858.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:18.043Z,1509669858.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:18.417Z,1509669858.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:18.431Z,1509669858.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:18.816Z,1509669858.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:18.831Z,1509669858.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:19.220Z,1509669859.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:19.235Z,1509669859.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:19.616Z,1509669859.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:19.631Z,1509669859.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:20.019Z,1509669860.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:20.037Z,1509669860.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:20.419Z,1509669860.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:20.435Z,1509669860.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:20.819Z,1509669860.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:20.835Z,1509669860.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:21.218Z,1509669861.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:21.234Z,1509669861.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:21.620Z,1509669861.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:21.638Z,1509669861.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:22.019Z,1509669862.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:22.034Z,1509669862.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:22.419Z,1509669862.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:22.435Z,1509669862.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:22.820Z,1509669862.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:22.835Z,1509669862.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:23.218Z,1509669863.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:23.233Z,1509669863.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:23.616Z,1509669863.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:23.631Z,1509669863.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:24.026Z,1509669864.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:24.041Z,1509669864.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:24.403Z,1509669864.403 [NAL9602](INFO): NAL9602 initialized
2017-11-03T00:44:24.420Z,1509669864.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:24.443Z,1509669864.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:24.821Z,1509669864.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:24.840Z,1509669864.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:25.230Z,1509669865.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:25.307Z,1509669865.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:28.309Z,1509669868.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:28.333Z,1509669868.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:28.486Z,1509669868.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:28.522Z,1509669868.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:28.874Z,1509669868.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:28.934Z,1509669868.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:29.271Z,1509669869.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:29.291Z,1509669869.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:29.659Z,1509669869.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:29.729Z,1509669869.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:30.086Z,1509669870.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:30.138Z,1509669870.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:30.479Z,1509669870.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:30.494Z,1509669870.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:30.884Z,1509669870.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:30.899Z,1509669870.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:31.270Z,1509669871.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:31.301Z,1509669871.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:31.675Z,1509669871.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:31.690Z,1509669871.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:32.073Z,1509669872.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:32.088Z,1509669872.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:32.472Z,1509669872.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:32.487Z,1509669872.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:32.876Z,1509669872.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:32.899Z,1509669872.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:33.276Z,1509669873.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:33.306Z,1509669873.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:33.683Z,1509669873.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:33.698Z,1509669873.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:34.058Z,1509669874.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:34.090Z,1509669874.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:34.471Z,1509669874.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:34.486Z,1509669874.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:34.870Z,1509669874.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:34.891Z,1509669874.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:35.260Z,1509669875.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:35.286Z,1509669875.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:35.658Z,1509669875.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:35.686Z,1509669875.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:36.085Z,1509669876.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:36.100Z,1509669876.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:36.487Z,1509669876.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:36.507Z,1509669876.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:36.879Z,1509669876.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:36.894Z,1509669876.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:37.275Z,1509669877.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:37.290Z,1509669877.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:37.659Z,1509669877.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:37.685Z,1509669877.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:38.076Z,1509669878.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:38.091Z,1509669878.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:38.463Z,1509669878.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:38.490Z,1509669878.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:38.885Z,1509669878.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:38.900Z,1509669878.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:39.281Z,1509669879.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:39.296Z,1509669879.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:39.689Z,1509669879.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:39.704Z,1509669879.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:40.074Z,1509669880.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:40.089Z,1509669880.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:40.473Z,1509669880.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:40.488Z,1509669880.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:40.862Z,1509669880.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:40.888Z,1509669880.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:41.277Z,1509669881.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:41.292Z,1509669881.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:41.664Z,1509669881.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:41.690Z,1509669881.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:42.082Z,1509669882.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:42.159Z,1509669882.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:42.481Z,1509669882.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:42.497Z,1509669882.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:42.885Z,1509669882.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:42.949Z,1509669882.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:43.263Z,1509669883.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:43.290Z,1509669883.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:43.674Z,1509669883.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:43.731Z,1509669883.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:44.063Z,1509669884.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:44.129Z,1509669884.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:44.460Z,1509669884.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:44.490Z,1509669884.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:44.885Z,1509669884.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:44.900Z,1509669884.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:45.285Z,1509669885.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:45.300Z,1509669885.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:45.682Z,1509669885.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:45.697Z,1509669885.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:46.057Z,1509669886.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:46.093Z,1509669886.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:46.473Z,1509669886.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:46.489Z,1509669886.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:46.874Z,1509669886.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:46.889Z,1509669886.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:47.260Z,1509669887.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:47.286Z,1509669887.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:47.657Z,1509669887.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:47.690Z,1509669887.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:48.083Z,1509669888.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:48.090Z,1509669888.090 [PNI_TCM](ERROR): CRC does not match. Expected:0x13567 got:0x54491
2017-11-03T00:44:48.134Z,1509669888.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:48.477Z,1509669888.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:48.493Z,1509669888.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:48.877Z,1509669888.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:48.892Z,1509669888.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:49.261Z,1509669889.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:49.300Z,1509669889.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:49.658Z,1509669889.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:49.685Z,1509669889.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:50.059Z,1509669890.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:50.085Z,1509669890.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:50.462Z,1509669890.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:50.488Z,1509669890.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:50.879Z,1509669890.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:50.894Z,1509669890.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:51.285Z,1509669891.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:51.300Z,1509669891.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:51.682Z,1509669891.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:51.697Z,1509669891.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:52.063Z,1509669892.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:52.089Z,1509669892.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:52.089Z,1509669892.089 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2017-11-03T00:44:52.089Z,1509669892.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:44:52.091Z,1509669892.091 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:52.091Z,1509669892.091 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2017-11-03T00:44:52.091Z,1509669892.091 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:44:52.093Z,1509669892.093 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:52.093Z,1509669892.093 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-11-03T00:44:52.093Z,1509669892.093 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:44:52.181Z,1509669892.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:44:52.181Z,1509669892.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:44:52.181Z,1509669892.181 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:44:52.481Z,1509669892.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:52.581Z,1509669892.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:44:52.581Z,1509669892.581 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2017-11-03T00:44:52.581Z,1509669892.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:44:52.581Z,1509669892.581 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2017-11-03T00:44:52.582Z,1509669892.582 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:44:52.582Z,1509669892.582 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-11-03T00:44:52.862Z,1509669892.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:52.892Z,1509669892.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:44:52.897Z,1509669892.897 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:44:52.897Z,1509669892.897 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:44:52.897Z,1509669892.897 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:44:52.898Z,1509669892.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:44:52.898Z,1509669892.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:44:52.899Z,1509669892.899 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:44:52.899Z,1509669892.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:44:52.899Z,1509669892.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:44:53.268Z,1509669893.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:53.298Z,1509669893.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:44:53.299Z,1509669893.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:53.663Z,1509669893.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:53.686Z,1509669893.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:44:53.687Z,1509669893.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:54.075Z,1509669894.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:54.101Z,1509669894.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:44:54.102Z,1509669894.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:54.478Z,1509669894.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:54.510Z,1509669894.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:44:54.511Z,1509669894.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:54.877Z,1509669894.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:54.910Z,1509669894.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:44:54.911Z,1509669894.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:55.265Z,1509669895.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:55.280Z,1509669895.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:44:55.289Z,1509669895.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:55.669Z,1509669895.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:55.725Z,1509669895.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:44:55.726Z,1509669895.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:56.069Z,1509669896.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:56.123Z,1509669896.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:44:56.124Z,1509669896.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:56.469Z,1509669896.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:56.483Z,1509669896.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:44:56.500Z,1509669896.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:56.877Z,1509669896.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:56.923Z,1509669896.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:44:56.924Z,1509669896.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:57.283Z,1509669897.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:57.306Z,1509669897.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:44:57.307Z,1509669897.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:57.678Z,1509669897.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:57.723Z,1509669897.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:44:57.724Z,1509669897.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:58.064Z,1509669898.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:58.118Z,1509669898.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:44:58.119Z,1509669898.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:58.466Z,1509669898.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:58.481Z,1509669898.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:44:58.482Z,1509669898.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:58.870Z,1509669898.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:58.886Z,1509669898.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:44:58.887Z,1509669898.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:59.267Z,1509669899.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:59.286Z,1509669899.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:44:59.287Z,1509669899.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:44:59.669Z,1509669899.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:44:59.683Z,1509669899.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T00:44:59.684Z,1509669899.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:00.078Z,1509669900.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:00.108Z,1509669900.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:45:00.109Z,1509669900.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:00.483Z,1509669900.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:00.512Z,1509669900.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:45:00.513Z,1509669900.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:00.872Z,1509669900.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:00.887Z,1509669900.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:45:00.888Z,1509669900.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:01.270Z,1509669901.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:01.285Z,1509669901.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:45:01.286Z,1509669901.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:01.669Z,1509669901.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:01.684Z,1509669901.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:45:01.685Z,1509669901.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:02.072Z,1509669902.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:02.086Z,1509669902.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:45:02.087Z,1509669902.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:02.472Z,1509669902.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:02.486Z,1509669902.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:45:02.487Z,1509669902.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:02.870Z,1509669902.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:02.886Z,1509669902.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T00:45:02.887Z,1509669902.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:03.281Z,1509669903.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:03.313Z,1509669903.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T00:45:03.314Z,1509669903.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:03.684Z,1509669903.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:03.714Z,1509669903.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T00:45:03.715Z,1509669903.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:04.064Z,1509669904.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:04.087Z,1509669904.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T00:45:04.088Z,1509669904.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:04.471Z,1509669904.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:04.487Z,1509669904.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T00:45:04.488Z,1509669904.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:04.869Z,1509669904.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:04.884Z,1509669904.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T00:45:04.885Z,1509669904.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:05.273Z,1509669905.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:05.289Z,1509669905.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T00:45:05.290Z,1509669905.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:05.668Z,1509669905.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:05.683Z,1509669905.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T00:45:05.684Z,1509669905.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:06.074Z,1509669906.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:06.090Z,1509669906.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T00:45:06.091Z,1509669906.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:06.474Z,1509669906.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:06.488Z,1509669906.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T00:45:06.489Z,1509669906.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:06.876Z,1509669906.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:06.891Z,1509669906.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T00:45:06.892Z,1509669906.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:07.273Z,1509669907.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:07.287Z,1509669907.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:45:07.288Z,1509669907.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:07.667Z,1509669907.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:07.682Z,1509669907.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T00:45:07.683Z,1509669907.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:08.070Z,1509669908.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:08.090Z,1509669908.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T00:45:08.091Z,1509669908.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:08.472Z,1509669908.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:08.487Z,1509669908.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T00:45:08.488Z,1509669908.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:08.875Z,1509669908.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:08.894Z,1509669908.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T00:45:08.895Z,1509669908.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:09.273Z,1509669909.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:09.288Z,1509669909.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T00:45:09.289Z,1509669909.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:09.673Z,1509669909.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:09.694Z,1509669909.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T00:45:09.695Z,1509669909.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:10.072Z,1509669910.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:10.162Z,1509669910.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T00:45:10.162Z,1509669910.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:10.473Z,1509669910.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:10.488Z,1509669910.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T00:45:10.489Z,1509669910.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:10.871Z,1509669910.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:10.894Z,1509669910.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T00:45:10.895Z,1509669910.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:11.271Z,1509669911.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:11.330Z,1509669911.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T00:45:11.330Z,1509669911.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:11.665Z,1509669911.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:11.685Z,1509669911.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T00:45:11.686Z,1509669911.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:12.082Z,1509669912.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:12.134Z,1509669912.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:12.477Z,1509669912.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:12.530Z,1509669912.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:12.876Z,1509669912.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:12.891Z,1509669912.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:13.273Z,1509669913.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:13.287Z,1509669913.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:13.668Z,1509669913.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:13.683Z,1509669913.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:14.073Z,1509669914.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:14.088Z,1509669914.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:14.469Z,1509669914.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:14.484Z,1509669914.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:14.882Z,1509669914.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:14.897Z,1509669914.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:15.279Z,1509669915.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:15.299Z,1509669915.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:15.680Z,1509669915.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:15.702Z,1509669915.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:16.069Z,1509669916.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:16.085Z,1509669916.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:16.465Z,1509669916.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:16.486Z,1509669916.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:16.874Z,1509669916.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:16.889Z,1509669916.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:17.273Z,1509669917.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:17.288Z,1509669917.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:17.670Z,1509669917.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:17.685Z,1509669917.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:18.083Z,1509669918.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:18.102Z,1509669918.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:18.482Z,1509669918.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:18.503Z,1509669918.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:18.876Z,1509669918.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:18.891Z,1509669918.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:19.269Z,1509669919.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:19.284Z,1509669919.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:19.672Z,1509669919.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:19.687Z,1509669919.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:20.074Z,1509669920.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:20.089Z,1509669920.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:20.473Z,1509669920.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:20.488Z,1509669920.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:20.880Z,1509669920.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:20.895Z,1509669920.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:21.283Z,1509669921.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:21.298Z,1509669921.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:21.683Z,1509669921.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:21.698Z,1509669921.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:22.071Z,1509669922.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:22.086Z,1509669922.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:22.471Z,1509669922.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:22.486Z,1509669922.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:22.874Z,1509669922.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:22.889Z,1509669922.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:23.273Z,1509669923.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:23.288Z,1509669923.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:23.674Z,1509669923.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:23.689Z,1509669923.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:24.081Z,1509669924.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:24.102Z,1509669924.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:24.483Z,1509669924.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:24.566Z,1509669924.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:24.872Z,1509669924.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:24.899Z,1509669924.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:25.267Z,1509669925.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:25.323Z,1509669925.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:28.351Z,1509669928.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:28.367Z,1509669928.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:28.508Z,1509669928.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:28.566Z,1509669928.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:28.919Z,1509669928.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:28.962Z,1509669928.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:29.318Z,1509669929.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:29.347Z,1509669929.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:29.717Z,1509669929.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:29.748Z,1509669929.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:30.104Z,1509669930.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:30.120Z,1509669930.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:30.503Z,1509669930.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:30.519Z,1509669930.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:30.900Z,1509669930.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:30.915Z,1509669930.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:31.304Z,1509669931.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:31.319Z,1509669931.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:31.703Z,1509669931.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:31.719Z,1509669931.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:32.104Z,1509669932.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:32.120Z,1509669932.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:32.517Z,1509669932.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:32.544Z,1509669932.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:32.918Z,1509669932.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:32.947Z,1509669932.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:33.300Z,1509669933.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:33.315Z,1509669933.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:33.703Z,1509669933.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:33.718Z,1509669933.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:34.104Z,1509669934.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:34.119Z,1509669934.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:34.503Z,1509669934.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:34.519Z,1509669934.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:34.918Z,1509669934.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:34.947Z,1509669934.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:35.318Z,1509669935.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:35.345Z,1509669935.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:35.709Z,1509669935.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:35.725Z,1509669935.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:36.105Z,1509669936.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:36.120Z,1509669936.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:36.504Z,1509669936.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:36.520Z,1509669936.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:36.904Z,1509669936.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:36.919Z,1509669936.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:37.315Z,1509669937.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:37.343Z,1509669937.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:37.706Z,1509669937.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:37.722Z,1509669937.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:38.109Z,1509669938.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:38.125Z,1509669938.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:38.510Z,1509669938.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:38.525Z,1509669938.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:38.910Z,1509669938.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:38.925Z,1509669938.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:39.304Z,1509669939.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:39.320Z,1509669939.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:39.707Z,1509669939.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:39.722Z,1509669939.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:40.108Z,1509669940.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:40.124Z,1509669940.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:40.505Z,1509669940.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:40.566Z,1509669940.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:40.914Z,1509669940.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:40.934Z,1509669940.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:41.312Z,1509669941.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:41.374Z,1509669941.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:41.718Z,1509669941.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:41.733Z,1509669941.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:42.111Z,1509669942.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:42.127Z,1509669942.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:42.509Z,1509669942.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:42.566Z,1509669942.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:42.913Z,1509669942.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:42.929Z,1509669942.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:43.310Z,1509669943.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:43.358Z,1509669943.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:43.706Z,1509669943.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:43.766Z,1509669943.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:44.119Z,1509669944.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:44.134Z,1509669944.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:44.519Z,1509669944.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:44.538Z,1509669944.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:44.914Z,1509669944.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:44.935Z,1509669944.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:45.307Z,1509669945.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:45.324Z,1509669945.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:45.706Z,1509669945.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:45.722Z,1509669945.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:46.107Z,1509669946.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:46.123Z,1509669946.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:46.504Z,1509669946.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:46.522Z,1509669946.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:46.914Z,1509669946.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:46.935Z,1509669946.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:47.313Z,1509669947.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:47.335Z,1509669947.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:47.717Z,1509669947.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:47.732Z,1509669947.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:48.106Z,1509669948.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:48.165Z,1509669948.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:48.506Z,1509669948.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:48.530Z,1509669948.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:48.905Z,1509669948.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:48.929Z,1509669948.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:49.297Z,1509669949.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:49.335Z,1509669949.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:49.700Z,1509669949.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:49.736Z,1509669949.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:50.115Z,1509669950.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:50.143Z,1509669950.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:50.511Z,1509669950.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:50.589Z,1509669950.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:50.908Z,1509669950.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:50.943Z,1509669950.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:51.339Z,1509669951.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:51.354Z,1509669951.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:51.703Z,1509669951.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:51.755Z,1509669951.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:52.126Z,1509669952.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:52.153Z,1509669952.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:52.495Z,1509669952.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:52.523Z,1509669952.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:52.919Z,1509669952.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:52.938Z,1509669952.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:53.319Z,1509669953.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:53.359Z,1509669953.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:53.715Z,1509669953.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:53.731Z,1509669953.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:54.120Z,1509669954.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:54.186Z,1509669954.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:54.504Z,1509669954.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:54.567Z,1509669954.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:54.942Z,1509669954.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:55.011Z,1509669955.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:55.305Z,1509669955.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:55.371Z,1509669955.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:55.709Z,1509669955.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:55.795Z,1509669955.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:56.107Z,1509669956.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:56.147Z,1509669956.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:56.520Z,1509669956.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:56.586Z,1509669956.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:56.908Z,1509669956.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:56.951Z,1509669956.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:57.327Z,1509669957.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:57.390Z,1509669957.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:57.695Z,1509669957.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:57.750Z,1509669957.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:58.097Z,1509669958.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:58.132Z,1509669958.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:58.499Z,1509669958.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:58.535Z,1509669958.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:58.909Z,1509669958.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:58.942Z,1509669958.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:59.309Z,1509669959.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:59.336Z,1509669959.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:45:59.709Z,1509669959.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:45:59.736Z,1509669959.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:00.097Z,1509669960.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:00.111Z,1509669960.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:00.496Z,1509669960.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:00.511Z,1509669960.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:00.899Z,1509669960.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:00.941Z,1509669960.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:01.302Z,1509669961.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:01.340Z,1509669961.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:01.696Z,1509669961.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:01.711Z,1509669961.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:02.109Z,1509669962.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:02.135Z,1509669962.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:02.509Z,1509669962.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:02.536Z,1509669962.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:02.913Z,1509669962.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:02.966Z,1509669962.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:03.300Z,1509669963.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:03.315Z,1509669963.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:03.697Z,1509669963.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:03.711Z,1509669963.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:04.097Z,1509669964.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:04.112Z,1509669964.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:04.499Z,1509669964.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:04.515Z,1509669964.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:04.913Z,1509669964.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:04.942Z,1509669964.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:05.309Z,1509669965.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:05.341Z,1509669965.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:05.714Z,1509669965.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:05.743Z,1509669965.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:06.101Z,1509669966.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:06.116Z,1509669966.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:06.503Z,1509669966.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:06.539Z,1509669966.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:06.900Z,1509669966.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:06.915Z,1509669966.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:07.300Z,1509669967.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:07.319Z,1509669967.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:07.699Z,1509669967.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:07.715Z,1509669967.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:08.113Z,1509669968.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:08.145Z,1509669968.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:08.513Z,1509669968.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:08.545Z,1509669968.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:08.909Z,1509669968.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:08.941Z,1509669968.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:09.300Z,1509669969.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:09.319Z,1509669969.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:09.700Z,1509669969.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:09.774Z,1509669969.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:10.100Z,1509669970.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:10.115Z,1509669970.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:10.504Z,1509669970.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:10.551Z,1509669970.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:10.913Z,1509669970.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:10.949Z,1509669970.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:11.313Z,1509669971.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:11.362Z,1509669971.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:11.713Z,1509669971.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:11.767Z,1509669971.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:12.100Z,1509669972.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:12.115Z,1509669972.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:12.500Z,1509669972.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:12.515Z,1509669972.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:12.904Z,1509669972.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:12.923Z,1509669972.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:13.300Z,1509669973.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:13.323Z,1509669973.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:13.700Z,1509669973.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:13.719Z,1509669973.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:14.113Z,1509669974.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:14.146Z,1509669974.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:14.513Z,1509669974.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:14.549Z,1509669974.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:14.905Z,1509669974.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:14.921Z,1509669974.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:15.300Z,1509669975.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:15.315Z,1509669975.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:15.701Z,1509669975.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:15.715Z,1509669975.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:16.102Z,1509669976.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:16.117Z,1509669976.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:16.504Z,1509669976.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:16.520Z,1509669976.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:16.913Z,1509669976.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:16.949Z,1509669976.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:17.313Z,1509669977.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:17.348Z,1509669977.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:17.718Z,1509669977.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:17.747Z,1509669977.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:18.101Z,1509669978.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:18.117Z,1509669978.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:18.502Z,1509669978.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:18.517Z,1509669978.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:18.902Z,1509669978.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:18.917Z,1509669978.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:19.302Z,1509669979.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:19.318Z,1509669979.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:19.701Z,1509669979.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:19.717Z,1509669979.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:20.114Z,1509669980.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:20.147Z,1509669980.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:20.513Z,1509669980.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:20.550Z,1509669980.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:20.914Z,1509669980.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:20.947Z,1509669980.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:21.301Z,1509669981.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:21.317Z,1509669981.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:21.701Z,1509669981.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:21.717Z,1509669981.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:22.101Z,1509669982.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:22.118Z,1509669982.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:22.504Z,1509669982.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:22.566Z,1509669982.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:22.910Z,1509669982.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:22.927Z,1509669982.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:23.319Z,1509669983.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:23.352Z,1509669983.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:23.719Z,1509669983.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:23.753Z,1509669983.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:24.104Z,1509669984.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:24.170Z,1509669984.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:24.504Z,1509669984.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:24.520Z,1509669984.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:24.523Z,1509669984.523 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T00:46:24.524Z,1509669984.524 [Default:CheckIn:C.Wait] Stopped
2017-11-03T00:46:24.524Z,1509669984.524 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T00:46:24.524Z,1509669984.524 [Default:CheckIn:D] Running Loop=1
2017-11-03T00:46:24.901Z,1509669984.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:24.916Z,1509669984.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:24.921Z,1509669984.921 [Default:CheckIn:D] Stopped
2017-11-03T00:46:24.921Z,1509669984.921 [Default:CheckIn:E] Running Loop=1
2017-11-03T00:46:25.303Z,1509669985.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:25.355Z,1509669985.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:25.359Z,1509669985.359 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.289229 min 
2017-11-03T00:46:25.359Z,1509669985.359 [Default:CheckIn:E] Stopped
2017-11-03T00:46:25.359Z,1509669985.359 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T00:46:25.359Z,1509669985.359 [Default:CheckIn] Stopped
2017-11-03T00:46:25.359Z,1509669985.359 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T00:46:25.360Z,1509669985.360 [Default:CheckIn](INFO): Running loop #4
2017-11-03T00:46:25.360Z,1509669985.360 [Default:CheckIn] Running Loop=4
2017-11-03T00:46:25.360Z,1509669985.360 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T00:46:25.360Z,1509669985.360 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T00:46:28.380Z,1509669988.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:28.395Z,1509669988.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:28.546Z,1509669988.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:28.615Z,1509669988.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:28.941Z,1509669988.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:29.013Z,1509669989.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:29.345Z,1509669989.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:29.371Z,1509669989.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:29.731Z,1509669989.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:29.746Z,1509669989.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:30.129Z,1509669990.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:30.171Z,1509669990.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:30.527Z,1509669990.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:30.542Z,1509669990.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:30.936Z,1509669990.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:30.967Z,1509669990.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:31.341Z,1509669991.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:31.374Z,1509669991.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:31.738Z,1509669991.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:31.769Z,1509669991.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:32.128Z,1509669992.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:32.143Z,1509669992.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:32.533Z,1509669992.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:32.548Z,1509669992.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:32.927Z,1509669992.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:32.942Z,1509669992.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:33.328Z,1509669993.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:33.343Z,1509669993.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:33.729Z,1509669993.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:33.743Z,1509669993.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:34.145Z,1509669994.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:34.176Z,1509669994.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:34.533Z,1509669994.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:34.549Z,1509669994.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:34.941Z,1509669994.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:34.972Z,1509669994.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:35.328Z,1509669995.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:35.343Z,1509669995.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:35.729Z,1509669995.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:35.748Z,1509669995.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:36.129Z,1509669996.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:36.144Z,1509669996.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:36.529Z,1509669996.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:36.544Z,1509669996.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:36.938Z,1509669996.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:36.953Z,1509669996.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:37.345Z,1509669997.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:37.367Z,1509669997.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:37.745Z,1509669997.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:37.767Z,1509669997.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:38.135Z,1509669998.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:38.151Z,1509669998.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:38.537Z,1509669998.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:38.553Z,1509669998.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:38.936Z,1509669998.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:38.959Z,1509669998.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:39.336Z,1509669999.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:39.351Z,1509669999.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:39.734Z,1509669999.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:39.749Z,1509669999.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:40.145Z,1509670000.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:40.205Z,1509670000.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:40.544Z,1509670000.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:40.606Z,1509670000.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:40.945Z,1509670000.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:40.982Z,1509670000.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:41.335Z,1509670001.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:41.355Z,1509670001.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:41.735Z,1509670001.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:41.794Z,1509670001.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:42.138Z,1509670002.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:42.153Z,1509670002.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:42.529Z,1509670002.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:42.583Z,1509670002.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:42.942Z,1509670002.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:42.995Z,1509670002.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:43.345Z,1509670003.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:43.363Z,1509670003.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:43.744Z,1509670003.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:43.759Z,1509670003.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:44.136Z,1509670004.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:44.151Z,1509670004.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:44.535Z,1509670004.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:44.555Z,1509670004.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:44.929Z,1509670004.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:44.949Z,1509670004.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:45.330Z,1509670005.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:45.345Z,1509670005.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:45.735Z,1509670005.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:45.750Z,1509670005.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:46.142Z,1509670006.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:46.157Z,1509670006.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:46.541Z,1509670006.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:46.556Z,1509670006.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:46.946Z,1509670006.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:46.961Z,1509670006.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:47.329Z,1509670007.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:47.350Z,1509670007.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:47.731Z,1509670007.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:47.746Z,1509670007.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:48.136Z,1509670008.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:48.151Z,1509670008.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:48.529Z,1509670008.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:48.559Z,1509670008.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:48.942Z,1509670008.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:48.957Z,1509670008.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:49.346Z,1509670009.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:49.361Z,1509670009.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:49.746Z,1509670009.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:49.761Z,1509670009.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:50.136Z,1509670010.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:50.151Z,1509670010.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:50.535Z,1509670010.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:50.550Z,1509670010.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:50.936Z,1509670010.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:50.959Z,1509670010.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:51.336Z,1509670011.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:51.351Z,1509670011.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:51.734Z,1509670011.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:51.749Z,1509670011.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:52.145Z,1509670012.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:52.160Z,1509670012.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:52.548Z,1509670012.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:52.563Z,1509670012.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:52.946Z,1509670012.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:52.961Z,1509670012.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:53.336Z,1509670013.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:53.351Z,1509670013.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:53.735Z,1509670013.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:53.808Z,1509670013.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:54.126Z,1509670014.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:54.153Z,1509670014.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:54.527Z,1509670014.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:54.553Z,1509670014.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:54.945Z,1509670014.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:55.008Z,1509670015.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:55.347Z,1509670015.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:55.362Z,1509670015.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:55.734Z,1509670015.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:55.766Z,1509670015.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:56.127Z,1509670016.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:56.179Z,1509670016.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:56.526Z,1509670016.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:56.561Z,1509670016.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:56.921Z,1509670016.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:56.978Z,1509670016.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:57.328Z,1509670017.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:57.368Z,1509670017.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:57.725Z,1509670017.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:57.763Z,1509670017.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:58.137Z,1509670018.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:58.163Z,1509670018.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:58.550Z,1509670018.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:58.566Z,1509670018.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:58.937Z,1509670018.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:58.965Z,1509670018.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:59.321Z,1509670019.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:59.359Z,1509670019.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:46:59.721Z,1509670019.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:46:59.737Z,1509670019.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:00.127Z,1509670020.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:00.163Z,1509670020.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:00.525Z,1509670020.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:00.540Z,1509670020.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:00.937Z,1509670020.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:00.969Z,1509670020.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:01.339Z,1509670021.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:01.359Z,1509670021.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:01.736Z,1509670021.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:01.755Z,1509670021.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:02.135Z,1509670022.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:02.150Z,1509670022.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:02.534Z,1509670022.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:02.549Z,1509670022.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:02.937Z,1509670022.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:02.952Z,1509670022.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:03.336Z,1509670023.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:03.352Z,1509670023.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:03.735Z,1509670023.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:03.751Z,1509670023.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:04.138Z,1509670024.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:04.154Z,1509670024.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:04.542Z,1509670024.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:04.558Z,1509670024.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:04.942Z,1509670024.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:04.958Z,1509670024.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:05.333Z,1509670025.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:05.349Z,1509670025.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:05.734Z,1509670025.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:05.750Z,1509670025.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:06.135Z,1509670026.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:06.150Z,1509670026.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:06.535Z,1509670026.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:06.550Z,1509670026.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:06.937Z,1509670026.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:06.953Z,1509670026.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:07.341Z,1509670027.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:07.356Z,1509670027.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:07.738Z,1509670027.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:07.753Z,1509670027.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:08.134Z,1509670028.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:08.196Z,1509670028.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:08.534Z,1509670028.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:08.549Z,1509670028.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:08.929Z,1509670028.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:08.944Z,1509670028.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:09.337Z,1509670029.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:09.352Z,1509670029.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:09.734Z,1509670029.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:09.767Z,1509670029.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:10.145Z,1509670030.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:10.160Z,1509670030.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:10.541Z,1509670030.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:10.598Z,1509670030.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:10.945Z,1509670030.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:10.966Z,1509670030.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:11.330Z,1509670031.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:11.385Z,1509670031.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:11.729Z,1509670031.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:11.784Z,1509670031.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:12.134Z,1509670032.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:12.149Z,1509670032.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:12.535Z,1509670032.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:12.555Z,1509670032.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:12.944Z,1509670032.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:12.959Z,1509670032.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:13.345Z,1509670033.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:13.366Z,1509670033.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:13.745Z,1509670033.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:13.760Z,1509670033.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:14.130Z,1509670034.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:14.145Z,1509670034.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:14.536Z,1509670034.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:14.551Z,1509670034.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:14.929Z,1509670034.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:14.948Z,1509670034.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:15.329Z,1509670035.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:15.345Z,1509670035.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:15.734Z,1509670035.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:15.754Z,1509670035.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:16.145Z,1509670036.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:16.160Z,1509670036.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:16.544Z,1509670036.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:16.559Z,1509670036.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:16.945Z,1509670036.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:16.959Z,1509670036.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:17.335Z,1509670037.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:17.355Z,1509670037.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:17.730Z,1509670037.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:17.745Z,1509670037.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:18.135Z,1509670038.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:18.150Z,1509670038.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:18.535Z,1509670038.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:18.555Z,1509670038.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:18.943Z,1509670038.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:18.966Z,1509670038.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:19.345Z,1509670039.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:19.359Z,1509670039.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:19.738Z,1509670039.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:19.753Z,1509670039.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:20.126Z,1509670040.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:20.153Z,1509670040.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:20.533Z,1509670040.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:20.548Z,1509670040.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:20.933Z,1509670040.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:20.948Z,1509670040.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:21.336Z,1509670041.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:21.351Z,1509670041.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:21.736Z,1509670041.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:21.751Z,1509670041.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:22.145Z,1509670042.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:22.160Z,1509670042.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:22.544Z,1509670042.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:22.606Z,1509670042.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:22.946Z,1509670042.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:22.966Z,1509670042.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:23.334Z,1509670043.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:23.349Z,1509670043.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:23.730Z,1509670043.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:23.790Z,1509670043.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:24.135Z,1509670044.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:24.150Z,1509670044.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:24.533Z,1509670044.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:24.549Z,1509670044.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:24.945Z,1509670044.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:24.995Z,1509670044.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:25.346Z,1509670045.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:25.361Z,1509670045.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:28.427Z,1509670048.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:28.489Z,1509670048.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:28.616Z,1509670048.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:28.646Z,1509670048.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:29.018Z,1509670049.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:29.067Z,1509670049.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:29.431Z,1509670049.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:29.451Z,1509670049.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:29.837Z,1509670049.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:29.852Z,1509670049.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:30.238Z,1509670050.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:30.258Z,1509670050.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:30.636Z,1509670050.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:30.651Z,1509670050.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:31.012Z,1509670051.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:31.040Z,1509670051.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:31.419Z,1509670051.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:31.444Z,1509670051.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:31.816Z,1509670051.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:31.846Z,1509670051.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:32.213Z,1509670052.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:32.240Z,1509670052.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:32.616Z,1509670052.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:32.651Z,1509670052.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:33.038Z,1509670053.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:33.053Z,1509670053.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:33.425Z,1509670053.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:33.451Z,1509670053.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:33.838Z,1509670053.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:33.853Z,1509670053.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:34.217Z,1509670054.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:34.248Z,1509670054.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:34.619Z,1509670054.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:34.650Z,1509670054.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:35.018Z,1509670055.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:35.033Z,1509670055.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:35.417Z,1509670055.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:35.432Z,1509670055.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:35.830Z,1509670055.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:35.855Z,1509670055.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:36.246Z,1509670056.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:36.266Z,1509670056.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:36.630Z,1509670056.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:36.656Z,1509670056.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:37.019Z,1509670057.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:37.035Z,1509670057.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:37.416Z,1509670057.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:37.430Z,1509670057.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:37.817Z,1509670057.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:37.832Z,1509670057.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:38.216Z,1509670058.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:38.231Z,1509670058.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:38.615Z,1509670058.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:38.630Z,1509670058.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:39.043Z,1509670059.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:39.059Z,1509670059.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:39.428Z,1509670059.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:39.456Z,1509670059.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:39.829Z,1509670059.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:39.871Z,1509670059.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:40.216Z,1509670060.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:40.231Z,1509670060.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:40.615Z,1509670060.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:40.631Z,1509670060.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:41.016Z,1509670061.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:41.075Z,1509670061.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:41.423Z,1509670061.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:41.438Z,1509670061.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:41.837Z,1509670061.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:41.883Z,1509670061.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:42.238Z,1509670062.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:42.264Z,1509670062.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:42.629Z,1509670062.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:42.675Z,1509670062.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:43.023Z,1509670063.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:43.039Z,1509670063.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:43.423Z,1509670063.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:43.467Z,1509670063.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:43.823Z,1509670063.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:43.838Z,1509670063.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:44.224Z,1509670064.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:44.239Z,1509670064.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:44.625Z,1509670064.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:44.640Z,1509670064.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:45.029Z,1509670065.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:45.045Z,1509670065.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:45.437Z,1509670065.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:45.466Z,1509670065.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:45.829Z,1509670065.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:45.865Z,1509670065.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:46.224Z,1509670066.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:46.239Z,1509670066.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:46.621Z,1509670066.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:46.635Z,1509670066.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:47.026Z,1509670067.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:47.041Z,1509670067.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:47.423Z,1509670067.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:47.439Z,1509670067.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:47.829Z,1509670067.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:47.845Z,1509670067.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:48.237Z,1509670068.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:48.268Z,1509670068.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:48.626Z,1509670068.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:48.641Z,1509670068.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:49.025Z,1509670069.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:49.041Z,1509670069.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:49.428Z,1509670069.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:49.442Z,1509670069.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:49.825Z,1509670069.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:49.840Z,1509670069.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:50.225Z,1509670070.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:50.240Z,1509670070.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:50.625Z,1509670070.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:50.640Z,1509670070.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:51.039Z,1509670071.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:51.067Z,1509670071.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:51.430Z,1509670071.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:51.446Z,1509670071.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:51.831Z,1509670071.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:51.867Z,1509670071.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:52.224Z,1509670072.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:52.240Z,1509670072.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:52.622Z,1509670072.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:52.642Z,1509670072.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:53.024Z,1509670073.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:53.048Z,1509670073.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:53.048Z,1509670073.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2017-11-03T00:47:53.048Z,1509670073.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:47:53.070Z,1509670073.070 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:53.070Z,1509670073.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2017-11-03T00:47:53.070Z,1509670073.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:47:53.072Z,1509670073.072 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:53.072Z,1509670073.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-11-03T00:47:53.072Z,1509670073.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:47:53.164Z,1509670073.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:47:53.165Z,1509670073.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:47:53.165Z,1509670073.165 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:47:53.426Z,1509670073.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:53.520Z,1509670073.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:47:53.521Z,1509670073.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2017-11-03T00:47:53.521Z,1509670073.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:47:53.521Z,1509670073.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2017-11-03T00:47:53.522Z,1509670073.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:47:53.522Z,1509670073.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-11-03T00:47:53.829Z,1509670073.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:53.843Z,1509670073.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:47:53.844Z,1509670073.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:47:53.844Z,1509670073.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:47:53.845Z,1509670073.845 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:47:53.845Z,1509670073.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:47:53.845Z,1509670073.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:47:53.846Z,1509670073.846 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:47:53.846Z,1509670073.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:47:53.847Z,1509670073.847 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:47:54.229Z,1509670074.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:54.290Z,1509670074.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:47:54.291Z,1509670074.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:54.630Z,1509670074.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:54.644Z,1509670074.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:47:54.645Z,1509670074.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:55.026Z,1509670075.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:55.041Z,1509670075.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:47:55.041Z,1509670075.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:55.426Z,1509670075.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:55.476Z,1509670075.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:47:55.477Z,1509670075.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:55.824Z,1509670075.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:55.839Z,1509670075.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:47:55.840Z,1509670075.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:56.227Z,1509670076.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:56.242Z,1509670076.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:47:56.243Z,1509670076.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:56.628Z,1509670076.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:56.675Z,1509670076.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:47:56.676Z,1509670076.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:57.032Z,1509670077.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:57.054Z,1509670077.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:47:57.055Z,1509670077.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:57.431Z,1509670077.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:57.482Z,1509670077.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:47:57.483Z,1509670077.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:57.833Z,1509670077.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:57.882Z,1509670077.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:47:57.883Z,1509670077.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:58.220Z,1509670078.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:58.235Z,1509670078.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:47:58.236Z,1509670078.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:58.625Z,1509670078.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:58.640Z,1509670078.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:47:58.641Z,1509670078.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:59.026Z,1509670079.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:59.040Z,1509670079.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:47:59.041Z,1509670079.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:59.426Z,1509670079.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:59.446Z,1509670079.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:47:59.447Z,1509670079.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:47:59.832Z,1509670079.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:47:59.854Z,1509670079.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:47:59.855Z,1509670079.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:00.232Z,1509670080.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:00.246Z,1509670080.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:48:00.247Z,1509670080.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:00.632Z,1509670080.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:00.654Z,1509670080.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T00:48:00.655Z,1509670080.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:01.020Z,1509670081.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:01.034Z,1509670081.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:48:01.035Z,1509670081.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:01.425Z,1509670081.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:01.439Z,1509670081.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:48:01.440Z,1509670081.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:01.809Z,1509670081.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:01.839Z,1509670081.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:48:01.839Z,1509670081.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:02.227Z,1509670082.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:02.242Z,1509670082.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:48:02.243Z,1509670082.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:02.627Z,1509670082.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:02.641Z,1509670082.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:48:02.642Z,1509670082.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:03.033Z,1509670083.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:03.047Z,1509670083.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:48:03.049Z,1509670083.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:03.435Z,1509670083.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:03.450Z,1509670083.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:48:03.451Z,1509670083.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:03.836Z,1509670083.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:03.858Z,1509670083.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T00:48:03.859Z,1509670083.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:04.227Z,1509670084.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:04.246Z,1509670084.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T00:48:04.247Z,1509670084.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:04.626Z,1509670084.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:04.646Z,1509670084.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T00:48:04.647Z,1509670084.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:05.028Z,1509670085.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:05.043Z,1509670085.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T00:48:05.044Z,1509670085.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:05.427Z,1509670085.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:05.446Z,1509670085.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T00:48:05.447Z,1509670085.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:05.836Z,1509670085.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:05.851Z,1509670085.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T00:48:05.851Z,1509670085.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:06.236Z,1509670086.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:06.258Z,1509670086.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T00:48:06.259Z,1509670086.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:06.636Z,1509670086.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:06.651Z,1509670086.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T00:48:06.652Z,1509670086.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:07.026Z,1509670087.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:07.046Z,1509670087.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T00:48:07.047Z,1509670087.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:07.427Z,1509670087.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:07.441Z,1509670087.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T00:48:07.442Z,1509670087.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:07.824Z,1509670087.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:07.846Z,1509670087.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T00:48:07.847Z,1509670087.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:08.227Z,1509670088.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:08.286Z,1509670088.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:48:08.287Z,1509670088.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:08.626Z,1509670088.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:08.640Z,1509670088.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T00:48:08.641Z,1509670088.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:09.037Z,1509670089.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:09.051Z,1509670089.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T00:48:09.053Z,1509670089.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:09.436Z,1509670089.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:09.451Z,1509670089.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T00:48:09.452Z,1509670089.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:09.838Z,1509670089.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:09.852Z,1509670089.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T00:48:09.853Z,1509670089.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:10.212Z,1509670090.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:10.266Z,1509670090.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T00:48:10.267Z,1509670090.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:10.616Z,1509670090.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:10.642Z,1509670090.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T00:48:10.643Z,1509670090.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:11.018Z,1509670091.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:11.044Z,1509670091.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T00:48:11.045Z,1509670091.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:11.416Z,1509670091.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:11.486Z,1509670091.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T00:48:11.487Z,1509670091.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:11.838Z,1509670091.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:11.852Z,1509670091.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T00:48:11.853Z,1509670091.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:12.237Z,1509670092.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:12.287Z,1509670092.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T00:48:12.288Z,1509670092.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:12.640Z,1509670092.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:12.698Z,1509670092.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T00:48:12.698Z,1509670092.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:13.019Z,1509670093.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:13.045Z,1509670093.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T00:48:13.046Z,1509670093.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:13.417Z,1509670093.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:13.452Z,1509670093.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:13.817Z,1509670093.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:13.851Z,1509670093.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:14.230Z,1509670094.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:14.245Z,1509670094.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:14.616Z,1509670094.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:14.644Z,1509670094.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:15.038Z,1509670095.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:15.053Z,1509670095.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:15.441Z,1509670095.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:15.463Z,1509670095.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:15.838Z,1509670095.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:15.853Z,1509670095.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:16.212Z,1509670096.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:16.242Z,1509670096.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:16.619Z,1509670096.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:16.645Z,1509670096.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:17.018Z,1509670097.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:17.044Z,1509670097.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:17.419Z,1509670097.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:17.444Z,1509670097.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:17.836Z,1509670097.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:17.851Z,1509670097.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:18.238Z,1509670098.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:18.253Z,1509670098.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:18.633Z,1509670098.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:18.648Z,1509670098.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:19.019Z,1509670099.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:19.045Z,1509670099.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:19.417Z,1509670099.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:19.448Z,1509670099.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:19.819Z,1509670099.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:19.845Z,1509670099.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:20.220Z,1509670100.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:20.245Z,1509670100.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:20.616Z,1509670100.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:20.643Z,1509670100.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:21.037Z,1509670101.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:21.052Z,1509670101.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:21.441Z,1509670101.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:21.456Z,1509670101.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:21.838Z,1509670101.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:21.853Z,1509670101.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:22.219Z,1509670102.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:22.245Z,1509670102.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:22.619Z,1509670102.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:22.645Z,1509670102.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:23.018Z,1509670103.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:23.071Z,1509670103.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:23.419Z,1509670103.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:23.444Z,1509670103.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:23.837Z,1509670103.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:23.852Z,1509670103.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:24.237Z,1509670104.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:24.306Z,1509670104.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:24.633Z,1509670104.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:24.648Z,1509670104.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:25.019Z,1509670105.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:25.075Z,1509670105.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:25.420Z,1509670105.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:25.446Z,1509670105.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:28.503Z,1509670108.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:28.563Z,1509670108.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:28.691Z,1509670108.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:28.734Z,1509670108.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:29.100Z,1509670109.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:29.147Z,1509670109.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:29.500Z,1509670109.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:29.515Z,1509670109.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:29.901Z,1509670109.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:29.915Z,1509670109.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:30.292Z,1509670110.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:30.307Z,1509670110.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:30.692Z,1509670110.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:30.707Z,1509670110.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:31.092Z,1509670111.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:31.107Z,1509670111.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:31.490Z,1509670111.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:31.505Z,1509670111.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:31.902Z,1509670111.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:31.923Z,1509670111.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:32.300Z,1509670112.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:32.315Z,1509670112.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:32.702Z,1509670112.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:32.717Z,1509670112.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:33.090Z,1509670113.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:33.105Z,1509670113.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:33.491Z,1509670113.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:33.507Z,1509670113.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:33.891Z,1509670113.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:33.906Z,1509670113.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:34.294Z,1509670114.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:34.309Z,1509670114.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:34.689Z,1509670114.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:34.747Z,1509670114.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:35.102Z,1509670115.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:35.117Z,1509670115.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:35.501Z,1509670115.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:35.516Z,1509670115.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:35.901Z,1509670115.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:35.916Z,1509670115.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:36.289Z,1509670116.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:36.312Z,1509670116.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:36.685Z,1509670116.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:36.706Z,1509670116.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:37.092Z,1509670117.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:37.108Z,1509670117.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:37.489Z,1509670117.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:37.506Z,1509670117.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:37.902Z,1509670117.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:37.923Z,1509670117.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:38.300Z,1509670118.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:38.316Z,1509670118.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:38.701Z,1509670118.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:38.719Z,1509670118.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:39.091Z,1509670119.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:39.107Z,1509670119.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:39.491Z,1509670119.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:39.506Z,1509670119.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:39.888Z,1509670119.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:39.908Z,1509670119.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:40.292Z,1509670120.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:40.307Z,1509670120.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:40.690Z,1509670120.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:40.706Z,1509670120.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:41.101Z,1509670121.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:41.166Z,1509670121.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:41.504Z,1509670121.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:41.527Z,1509670121.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:41.901Z,1509670121.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:41.916Z,1509670121.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:42.289Z,1509670122.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:42.351Z,1509670122.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:42.691Z,1509670122.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:42.711Z,1509670122.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:43.077Z,1509670123.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:43.145Z,1509670123.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:43.491Z,1509670123.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:43.546Z,1509670123.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:43.901Z,1509670123.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:43.916Z,1509670123.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:44.304Z,1509670124.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:44.319Z,1509670124.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:44.702Z,1509670124.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:44.717Z,1509670124.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:45.083Z,1509670125.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:45.109Z,1509670125.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:45.483Z,1509670125.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:45.508Z,1509670125.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:45.881Z,1509670125.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:45.909Z,1509670125.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:46.278Z,1509670126.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:46.309Z,1509670126.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:46.676Z,1509670126.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:46.691Z,1509670126.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:47.106Z,1509670127.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:47.121Z,1509670127.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:47.505Z,1509670127.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:47.520Z,1509670127.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:47.902Z,1509670127.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:47.917Z,1509670127.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:48.281Z,1509670128.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:48.314Z,1509670128.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:48.683Z,1509670128.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:48.713Z,1509670128.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:49.080Z,1509670129.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:49.111Z,1509670129.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:49.480Z,1509670129.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:49.495Z,1509670129.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:49.894Z,1509670129.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:49.923Z,1509670129.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:50.293Z,1509670130.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:50.323Z,1509670130.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:50.702Z,1509670130.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:50.721Z,1509670130.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:51.087Z,1509670131.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:51.116Z,1509670131.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:51.484Z,1509670131.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:51.511Z,1509670131.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:51.884Z,1509670131.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:51.915Z,1509670131.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:52.282Z,1509670132.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:52.313Z,1509670132.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:52.687Z,1509670132.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:52.716Z,1509670132.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:53.101Z,1509670133.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:53.116Z,1509670133.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:53.507Z,1509670133.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:53.522Z,1509670133.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:53.907Z,1509670133.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:53.927Z,1509670133.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:54.284Z,1509670134.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:54.307Z,1509670134.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:54.681Z,1509670134.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:54.696Z,1509670134.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:55.083Z,1509670135.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:55.099Z,1509670135.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:55.482Z,1509670135.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:55.497Z,1509670135.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:55.893Z,1509670135.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:55.947Z,1509670135.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:56.293Z,1509670136.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:56.319Z,1509670136.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:56.693Z,1509670136.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:56.719Z,1509670136.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:57.080Z,1509670137.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:57.095Z,1509670137.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:57.479Z,1509670137.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:57.495Z,1509670137.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:57.883Z,1509670137.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:57.899Z,1509670137.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:58.281Z,1509670138.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:58.296Z,1509670138.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:58.679Z,1509670138.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:58.688Z,1509670138.688 [BPC1](ERROR): Failed to receive battery data
2017-11-03T00:48:58.688Z,1509670138.688 [BPC1] Communications Fault, FailCount= 1
2017-11-03T00:48:58.688Z,1509670138.688 [BPC1](ERROR): Communications Fault
2017-11-03T00:48:58.697Z,1509670138.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:58.793Z,1509670138.793 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T00:48:59.102Z,1509670139.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:59.135Z,1509670139.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:59.494Z,1509670139.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:59.524Z,1509670139.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:48:59.893Z,1509670139.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:48:59.925Z,1509670139.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:00.021Z,1509670140.021 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:49:00.021Z,1509670140.021 [BPC1] No Fault, FailCount= 1
2017-11-03T00:49:00.287Z,1509670140.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:00.371Z,1509670140.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:00.680Z,1509670140.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:00.695Z,1509670140.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:01.088Z,1509670141.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:01.103Z,1509670141.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:01.484Z,1509670141.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:01.499Z,1509670141.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:01.901Z,1509670141.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:01.926Z,1509670141.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:02.301Z,1509670142.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:02.326Z,1509670142.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:02.698Z,1509670142.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:02.729Z,1509670142.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:03.087Z,1509670143.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:03.102Z,1509670143.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:03.479Z,1509670143.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:03.495Z,1509670143.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:03.884Z,1509670143.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:03.899Z,1509670143.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:04.280Z,1509670144.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:04.335Z,1509670144.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:04.687Z,1509670144.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:04.702Z,1509670144.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:05.097Z,1509670145.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:05.133Z,1509670145.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:05.497Z,1509670145.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:05.530Z,1509670145.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:05.897Z,1509670145.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:05.912Z,1509670145.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:06.284Z,1509670146.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:06.299Z,1509670146.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:06.684Z,1509670146.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:06.707Z,1509670146.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:07.084Z,1509670147.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:07.099Z,1509670147.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:07.484Z,1509670147.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:07.499Z,1509670147.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:07.890Z,1509670147.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:07.905Z,1509670147.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:08.297Z,1509670148.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:08.312Z,1509670148.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:08.697Z,1509670148.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:08.728Z,1509670148.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:09.085Z,1509670149.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:09.099Z,1509670149.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:09.489Z,1509670149.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:09.504Z,1509670149.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:09.890Z,1509670149.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:09.905Z,1509670149.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:10.286Z,1509670150.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:10.301Z,1509670150.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:10.685Z,1509670150.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:10.700Z,1509670150.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:11.093Z,1509670151.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:11.109Z,1509670151.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:11.502Z,1509670151.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:11.531Z,1509670151.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:11.893Z,1509670151.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:11.909Z,1509670151.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:12.289Z,1509670152.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:12.304Z,1509670152.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:12.687Z,1509670152.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:12.703Z,1509670152.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:13.090Z,1509670153.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:13.105Z,1509670153.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:13.491Z,1509670153.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:13.511Z,1509670153.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:13.901Z,1509670153.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:13.931Z,1509670153.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:14.301Z,1509670154.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:14.332Z,1509670154.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:14.695Z,1509670154.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:14.710Z,1509670154.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:15.090Z,1509670155.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:15.105Z,1509670155.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:15.489Z,1509670155.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:15.550Z,1509670155.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:15.890Z,1509670155.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:15.911Z,1509670155.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:16.289Z,1509670156.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:16.306Z,1509670156.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:16.687Z,1509670156.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:16.743Z,1509670156.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:17.093Z,1509670157.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:17.109Z,1509670157.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:17.501Z,1509670157.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:17.555Z,1509670157.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:17.901Z,1509670157.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:17.951Z,1509670157.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:18.289Z,1509670158.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:18.304Z,1509670158.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:18.688Z,1509670158.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:18.711Z,1509670158.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:19.088Z,1509670159.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:19.103Z,1509670159.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:19.487Z,1509670159.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:19.502Z,1509670159.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:19.901Z,1509670159.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:19.934Z,1509670159.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:20.289Z,1509670160.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:20.305Z,1509670160.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:20.697Z,1509670160.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:20.712Z,1509670160.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:21.085Z,1509670161.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:21.099Z,1509670161.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:21.489Z,1509670161.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:21.504Z,1509670161.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:21.889Z,1509670161.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:21.903Z,1509670161.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:22.286Z,1509670162.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:22.301Z,1509670162.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:22.684Z,1509670162.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:22.699Z,1509670162.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:23.093Z,1509670163.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:23.114Z,1509670163.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:23.492Z,1509670163.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:23.507Z,1509670163.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:23.892Z,1509670163.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:23.907Z,1509670163.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:24.290Z,1509670164.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:24.304Z,1509670164.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:24.690Z,1509670164.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:24.705Z,1509670164.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:25.090Z,1509670165.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:25.106Z,1509670165.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:25.492Z,1509670165.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:25.507Z,1509670165.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:28.602Z,1509670168.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:28.651Z,1509670168.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:28.800Z,1509670168.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:28.842Z,1509670168.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:29.196Z,1509670169.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:29.214Z,1509670169.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:29.591Z,1509670169.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:29.611Z,1509670169.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:29.988Z,1509670169.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:30.062Z,1509670170.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:30.385Z,1509670170.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:30.401Z,1509670170.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:30.793Z,1509670170.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:30.847Z,1509670170.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:31.193Z,1509670171.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:31.208Z,1509670171.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:31.596Z,1509670171.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:31.640Z,1509670171.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:31.982Z,1509670171.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:32.043Z,1509670172.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:32.372Z,1509670172.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:32.400Z,1509670172.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:32.798Z,1509670172.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:32.812Z,1509670172.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:33.201Z,1509670173.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:33.216Z,1509670173.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:33.598Z,1509670173.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:33.613Z,1509670173.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:33.976Z,1509670173.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:34.006Z,1509670174.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:34.372Z,1509670174.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:34.402Z,1509670174.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:34.793Z,1509670174.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:34.808Z,1509670174.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:35.198Z,1509670175.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:35.218Z,1509670175.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:35.597Z,1509670175.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:35.612Z,1509670175.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:35.979Z,1509670175.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:36.005Z,1509670176.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:36.376Z,1509670176.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:36.402Z,1509670176.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:36.797Z,1509670176.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:36.812Z,1509670176.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:37.193Z,1509670177.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:37.208Z,1509670177.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:37.598Z,1509670177.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:37.618Z,1509670177.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:37.979Z,1509670177.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:38.005Z,1509670178.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:38.372Z,1509670178.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:38.402Z,1509670178.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:38.801Z,1509670178.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:38.816Z,1509670178.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:39.197Z,1509670179.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:39.213Z,1509670179.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:39.597Z,1509670179.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:39.613Z,1509670179.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:39.978Z,1509670179.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:40.005Z,1509670180.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:40.376Z,1509670180.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:40.403Z,1509670180.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:40.793Z,1509670180.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:40.808Z,1509670180.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:41.202Z,1509670181.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:41.217Z,1509670181.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:41.598Z,1509670181.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:41.613Z,1509670181.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:41.979Z,1509670181.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:42.006Z,1509670182.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:42.379Z,1509670182.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:42.405Z,1509670182.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:42.798Z,1509670182.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:42.806Z,1509670182.806 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T00:49:42.806Z,1509670182.806 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:49:42.806Z,1509670182.806 [BPC1](ERROR): Data Fault
2017-11-03T00:49:42.814Z,1509670182.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:42.889Z,1509670182.889 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:49:43.201Z,1509670183.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:43.216Z,1509670183.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:43.598Z,1509670183.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:43.618Z,1509670183.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:43.977Z,1509670183.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:44.004Z,1509670184.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:44.097Z,1509670184.097 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:49:44.097Z,1509670184.097 [BPC1] No Fault, FailCount= 1
2017-11-03T00:49:44.379Z,1509670184.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:44.463Z,1509670184.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:44.799Z,1509670184.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:44.854Z,1509670184.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:45.198Z,1509670185.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:45.213Z,1509670185.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:45.597Z,1509670185.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:45.613Z,1509670185.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:45.977Z,1509670185.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:46.004Z,1509670186.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:46.376Z,1509670186.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:46.402Z,1509670186.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:46.797Z,1509670186.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:46.813Z,1509670186.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:47.198Z,1509670187.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:47.215Z,1509670187.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:47.597Z,1509670187.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:47.613Z,1509670187.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:47.971Z,1509670187.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:48.006Z,1509670188.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:48.379Z,1509670188.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:48.404Z,1509670188.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:48.798Z,1509670188.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:48.813Z,1509670188.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:49.193Z,1509670189.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:49.208Z,1509670189.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:49.598Z,1509670189.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:49.618Z,1509670189.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:49.977Z,1509670189.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:50.004Z,1509670190.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:50.375Z,1509670190.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:50.406Z,1509670190.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:50.795Z,1509670190.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:50.810Z,1509670190.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:51.196Z,1509670191.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:51.211Z,1509670191.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:51.594Z,1509670191.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:51.615Z,1509670191.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:51.978Z,1509670191.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:52.004Z,1509670192.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:52.376Z,1509670192.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:52.406Z,1509670192.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:52.794Z,1509670192.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:52.809Z,1509670192.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:53.198Z,1509670193.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:53.214Z,1509670193.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:53.597Z,1509670193.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:53.612Z,1509670193.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:53.975Z,1509670193.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:54.006Z,1509670194.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:54.381Z,1509670194.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:54.426Z,1509670194.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:54.794Z,1509670194.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:54.824Z,1509670194.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:55.193Z,1509670195.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:55.223Z,1509670195.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:55.593Z,1509670195.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:55.624Z,1509670195.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:55.981Z,1509670195.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:56.048Z,1509670196.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:56.380Z,1509670196.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:56.395Z,1509670196.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:56.793Z,1509670196.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:56.847Z,1509670196.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:57.193Z,1509670197.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:57.230Z,1509670197.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:57.593Z,1509670197.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:57.625Z,1509670197.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:57.982Z,1509670197.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:58.028Z,1509670198.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:58.380Z,1509670198.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:58.395Z,1509670198.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:58.793Z,1509670198.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:58.845Z,1509670198.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:59.193Z,1509670199.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:59.250Z,1509670199.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:59.594Z,1509670199.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:59.625Z,1509670199.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:49:59.981Z,1509670199.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:49:59.997Z,1509670199.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:00.381Z,1509670200.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:00.396Z,1509670200.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:00.794Z,1509670200.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:00.826Z,1509670200.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:01.194Z,1509670201.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:01.225Z,1509670201.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:01.590Z,1509670201.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:01.605Z,1509670201.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:01.985Z,1509670201.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:02.003Z,1509670202.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:02.384Z,1509670202.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:02.400Z,1509670202.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:02.790Z,1509670202.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:02.806Z,1509670202.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:03.186Z,1509670203.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:03.202Z,1509670203.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:03.586Z,1509670203.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:03.601Z,1509670203.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:03.986Z,1509670203.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:04.001Z,1509670204.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:04.380Z,1509670204.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:04.396Z,1509670204.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:04.798Z,1509670204.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:04.827Z,1509670204.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:05.197Z,1509670205.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:05.224Z,1509670205.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:05.598Z,1509670205.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:05.626Z,1509670205.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:05.984Z,1509670205.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:06.007Z,1509670206.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:06.385Z,1509670206.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:06.400Z,1509670206.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:06.798Z,1509670206.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:06.827Z,1509670206.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:07.197Z,1509670207.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:07.225Z,1509670207.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:07.589Z,1509670207.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:07.626Z,1509670207.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:07.984Z,1509670207.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:08.007Z,1509670208.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:08.382Z,1509670208.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:08.398Z,1509670208.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:08.789Z,1509670208.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:08.826Z,1509670208.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:09.197Z,1509670209.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:09.227Z,1509670209.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:09.589Z,1509670209.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:09.626Z,1509670209.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:09.985Z,1509670209.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:09.994Z,1509670209.994 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T00:50:09.994Z,1509670209.994 [BPC1] Data Fault, FailCount= 1
2017-11-03T00:50:09.994Z,1509670209.994 [BPC1](ERROR): Data Fault
2017-11-03T00:50:10.002Z,1509670210.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:10.115Z,1509670210.115 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T00:50:10.384Z,1509670210.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:10.400Z,1509670210.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:10.789Z,1509670210.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:10.805Z,1509670210.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:11.197Z,1509670211.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:11.224Z,1509670211.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:11.321Z,1509670211.321 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:50:11.321Z,1509670211.321 [BPC1] No Fault, FailCount= 1
2017-11-03T00:50:11.586Z,1509670211.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:11.670Z,1509670211.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:11.983Z,1509670211.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:11.999Z,1509670211.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:12.383Z,1509670212.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:12.430Z,1509670212.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:12.797Z,1509670212.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:12.827Z,1509670212.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:13.197Z,1509670213.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:13.227Z,1509670213.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:13.589Z,1509670213.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:13.625Z,1509670213.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:13.983Z,1509670213.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:13.999Z,1509670213.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:14.383Z,1509670214.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:14.399Z,1509670214.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:14.797Z,1509670214.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:14.827Z,1509670214.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:15.185Z,1509670215.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:15.201Z,1509670215.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:15.597Z,1509670215.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:15.627Z,1509670215.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:15.985Z,1509670215.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:16.000Z,1509670216.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:16.380Z,1509670216.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:16.395Z,1509670216.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:16.797Z,1509670216.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:16.827Z,1509670216.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:17.197Z,1509670217.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:17.224Z,1509670217.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:17.597Z,1509670217.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:17.627Z,1509670217.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:17.984Z,1509670217.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:17.999Z,1509670217.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:18.383Z,1509670218.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:18.398Z,1509670218.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:18.786Z,1509670218.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:18.801Z,1509670218.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:19.189Z,1509670219.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:19.226Z,1509670219.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:19.597Z,1509670219.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:19.626Z,1509670219.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:19.984Z,1509670219.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:19.000Z,1509670220.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:20.380Z,1509670220.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:20.401Z,1509670220.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:20.789Z,1509670220.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:20.805Z,1509670220.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:21.197Z,1509670221.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:21.229Z,1509670221.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:21.590Z,1509670221.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:21.605Z,1509670221.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:21.988Z,1509670221.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:22.003Z,1509670222.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:22.386Z,1509670222.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:22.402Z,1509670222.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:22.790Z,1509670222.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:22.857Z,1509670222.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:23.189Z,1509670223.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:23.205Z,1509670223.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:23.588Z,1509670223.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:23.603Z,1509670223.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:23.982Z,1509670223.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:24.042Z,1509670224.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:24.385Z,1509670224.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:24.400Z,1509670224.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:24.796Z,1509670224.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:24.812Z,1509670224.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:25.196Z,1509670225.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:25.247Z,1509670225.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:25.598Z,1509670225.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:25.619Z,1509670225.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:28.660Z,1509670228.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:28.707Z,1509670228.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:28.816Z,1509670228.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:28.852Z,1509670228.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:29.238Z,1509670229.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:29.310Z,1509670229.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:29.636Z,1509670229.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:29.658Z,1509670229.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:30.041Z,1509670230.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:30.086Z,1509670230.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:30.419Z,1509670230.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:30.446Z,1509670230.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:30.819Z,1509670230.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:30.849Z,1509670230.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:31.220Z,1509670231.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:31.249Z,1509670231.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:31.617Z,1509670231.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:31.648Z,1509670231.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:32.034Z,1509670232.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:32.049Z,1509670232.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:32.441Z,1509670232.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:32.459Z,1509670232.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:32.841Z,1509670232.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:32.856Z,1509670232.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:33.213Z,1509670233.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:33.247Z,1509670233.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:33.619Z,1509670233.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:33.645Z,1509670233.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:34.018Z,1509670234.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:34.047Z,1509670234.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:34.413Z,1509670234.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:34.444Z,1509670234.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:34.825Z,1509670234.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:34.859Z,1509670234.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:35.242Z,1509670235.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:35.261Z,1509670235.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:35.642Z,1509670235.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:35.660Z,1509670235.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:36.019Z,1509670236.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:36.050Z,1509670236.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:36.417Z,1509670236.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:36.448Z,1509670236.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:36.820Z,1509670236.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:36.857Z,1509670236.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:37.220Z,1509670237.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:37.235Z,1509670237.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:37.617Z,1509670237.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:37.633Z,1509670237.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:38.029Z,1509670238.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:38.061Z,1509670238.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:38.433Z,1509670238.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:38.462Z,1509670238.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:38.829Z,1509670238.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:38.865Z,1509670238.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:39.222Z,1509670239.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:39.241Z,1509670239.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:39.620Z,1509670239.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:39.635Z,1509670239.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:40.022Z,1509670240.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:40.086Z,1509670240.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:40.426Z,1509670240.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:40.442Z,1509670240.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:40.830Z,1509670240.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:40.864Z,1509670240.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:41.229Z,1509670241.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:41.274Z,1509670241.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:41.626Z,1509670241.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:41.641Z,1509670241.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:42.023Z,1509670242.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:42.038Z,1509670242.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:42.427Z,1509670242.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:42.487Z,1509670242.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:42.833Z,1509670242.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:42.848Z,1509670242.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:43.221Z,1509670243.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:43.278Z,1509670243.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:43.626Z,1509670243.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:43.682Z,1509670243.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:44.041Z,1509670244.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:44.071Z,1509670244.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:44.426Z,1509670244.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:44.469Z,1509670244.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:44.830Z,1509670244.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:44.846Z,1509670244.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:45.223Z,1509670245.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:45.239Z,1509670245.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:45.620Z,1509670245.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:45.641Z,1509670245.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:46.025Z,1509670246.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:46.041Z,1509670246.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:46.421Z,1509670246.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:46.436Z,1509670246.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:46.824Z,1509670246.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:46.839Z,1509670246.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:47.239Z,1509670247.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:47.267Z,1509670247.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:47.626Z,1509670247.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:47.669Z,1509670247.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:48.020Z,1509670248.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:48.035Z,1509670248.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:48.425Z,1509670248.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:48.441Z,1509670248.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:48.843Z,1509670248.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:48.873Z,1509670248.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:49.220Z,1509670249.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:49.269Z,1509670249.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:49.622Z,1509670249.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:49.649Z,1509670249.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:50.034Z,1509670250.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:50.055Z,1509670250.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:50.432Z,1509670250.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:50.481Z,1509670250.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:50.832Z,1509670250.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:50.879Z,1509670250.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:51.226Z,1509670251.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:51.241Z,1509670251.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:51.624Z,1509670251.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:51.646Z,1509670251.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:52.027Z,1509670252.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:52.052Z,1509670252.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:52.433Z,1509670252.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:52.466Z,1509670252.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:52.837Z,1509670252.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:52.867Z,1509670252.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:53.241Z,1509670253.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:53.268Z,1509670253.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:53.626Z,1509670253.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:53.663Z,1509670253.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:54.023Z,1509670254.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:54.082Z,1509670254.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:54.082Z,1509670254.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2017-11-03T00:50:54.082Z,1509670254.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:50:54.092Z,1509670254.092 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:54.092Z,1509670254.092 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2017-11-03T00:50:54.093Z,1509670254.093 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:50:54.094Z,1509670254.094 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:54.095Z,1509670254.095 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-11-03T00:50:54.095Z,1509670254.095 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:50:54.209Z,1509670254.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:50:54.209Z,1509670254.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:50:54.209Z,1509670254.209 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:50:54.438Z,1509670254.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:54.561Z,1509670254.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:50:54.561Z,1509670254.561 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2017-11-03T00:50:54.562Z,1509670254.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:50:54.562Z,1509670254.562 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2017-11-03T00:50:54.562Z,1509670254.562 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:50:54.562Z,1509670254.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-11-03T00:50:54.833Z,1509670254.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:54.877Z,1509670254.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:50:54.877Z,1509670254.877 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:50:54.877Z,1509670254.877 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:50:54.878Z,1509670254.878 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:50:54.878Z,1509670254.878 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:50:54.878Z,1509670254.878 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:50:54.879Z,1509670254.879 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:50:54.879Z,1509670254.879 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:50:54.880Z,1509670254.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:50:55.233Z,1509670255.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:55.259Z,1509670255.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:50:55.260Z,1509670255.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:55.617Z,1509670255.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:55.683Z,1509670255.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:50:55.683Z,1509670255.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:56.040Z,1509670256.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:56.099Z,1509670256.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:50:56.100Z,1509670256.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:56.439Z,1509670256.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:56.465Z,1509670256.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:50:56.466Z,1509670256.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:56.845Z,1509670256.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:56.902Z,1509670256.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:50:56.903Z,1509670256.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:57.217Z,1509670257.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:57.272Z,1509670257.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:50:57.273Z,1509670257.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:57.620Z,1509670257.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:57.702Z,1509670257.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:50:57.703Z,1509670257.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:58.033Z,1509670258.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:58.110Z,1509670258.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:50:58.111Z,1509670258.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:58.426Z,1509670258.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:58.473Z,1509670258.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:50:58.474Z,1509670258.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:58.826Z,1509670258.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:58.851Z,1509670258.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:50:58.852Z,1509670258.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:59.235Z,1509670259.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:59.282Z,1509670259.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:50:59.283Z,1509670259.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:50:59.635Z,1509670259.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:50:59.680Z,1509670259.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:50:59.681Z,1509670259.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:00.026Z,1509670260.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:00.055Z,1509670260.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T00:51:00.057Z,1509670260.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:00.427Z,1509670260.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:00.441Z,1509670260.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T00:51:00.442Z,1509670260.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:00.813Z,1509670260.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:00.842Z,1509670260.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T00:51:00.843Z,1509670260.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:01.213Z,1509670261.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:01.240Z,1509670261.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T00:51:01.246Z,1509670261.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:01.617Z,1509670261.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:01.647Z,1509670261.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T00:51:01.648Z,1509670261.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:02.034Z,1509670262.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:02.049Z,1509670262.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T00:51:02.049Z,1509670262.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:02.433Z,1509670262.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:02.448Z,1509670262.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T00:51:02.449Z,1509670262.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:02.838Z,1509670262.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:02.857Z,1509670262.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T00:51:02.858Z,1509670262.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:03.213Z,1509670263.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:03.244Z,1509670263.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T00:51:03.245Z,1509670263.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:03.613Z,1509670263.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:03.640Z,1509670263.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T00:51:03.645Z,1509670263.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:04.021Z,1509670264.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:04.047Z,1509670264.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T00:51:04.048Z,1509670264.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:04.420Z,1509670264.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:04.449Z,1509670264.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T00:51:04.450Z,1509670264.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:04.842Z,1509670264.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:04.856Z,1509670264.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T00:51:04.857Z,1509670264.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:05.238Z,1509670265.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:05.282Z,1509670265.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T00:51:05.283Z,1509670265.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:05.657Z,1509670265.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:05.684Z,1509670265.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T00:51:05.685Z,1509670265.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:06.019Z,1509670266.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:06.062Z,1509670266.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T00:51:06.063Z,1509670266.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:06.417Z,1509670266.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:06.452Z,1509670266.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T00:51:06.457Z,1509670266.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:06.819Z,1509670266.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:06.854Z,1509670266.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T00:51:06.855Z,1509670266.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:07.220Z,1509670267.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:07.256Z,1509670267.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T00:51:07.261Z,1509670267.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:07.617Z,1509670267.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:07.632Z,1509670267.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-03T00:51:07.633Z,1509670267.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:08.030Z,1509670268.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:08.058Z,1509670268.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T00:51:08.059Z,1509670268.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:08.429Z,1509670268.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:08.461Z,1509670268.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T00:51:08.463Z,1509670268.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:08.829Z,1509670268.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:08.882Z,1509670268.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T00:51:08.883Z,1509670268.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:09.220Z,1509670269.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:09.244Z,1509670269.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T00:51:09.261Z,1509670269.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:09.620Z,1509670269.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:09.638Z,1509670269.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T00:51:09.639Z,1509670269.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:10.021Z,1509670270.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:10.042Z,1509670270.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T00:51:10.043Z,1509670270.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:10.423Z,1509670270.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:10.489Z,1509670270.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T00:51:10.490Z,1509670270.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:10.833Z,1509670270.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:10.852Z,1509670270.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T00:51:10.853Z,1509670270.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:11.239Z,1509670271.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:11.297Z,1509670271.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T00:51:11.298Z,1509670271.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:11.633Z,1509670271.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:11.675Z,1509670271.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T00:51:11.676Z,1509670271.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:12.026Z,1509670272.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:12.082Z,1509670272.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T00:51:12.083Z,1509670272.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:12.424Z,1509670272.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:12.482Z,1509670272.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T00:51:12.483Z,1509670272.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:12.836Z,1509670272.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:12.852Z,1509670272.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T00:51:12.853Z,1509670272.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:13.227Z,1509670273.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:13.258Z,1509670273.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T00:51:13.259Z,1509670273.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:13.628Z,1509670273.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:13.643Z,1509670273.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T00:51:13.644Z,1509670273.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:14.036Z,1509670274.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:14.055Z,1509670274.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T00:51:14.056Z,1509670274.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:14.439Z,1509670274.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:14.459Z,1509670274.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:14.838Z,1509670274.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:14.878Z,1509670274.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:15.227Z,1509670275.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:15.247Z,1509670275.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:15.620Z,1509670275.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:15.650Z,1509670275.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:16.028Z,1509670276.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:16.046Z,1509670276.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:16.413Z,1509670276.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:16.443Z,1509670276.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:16.837Z,1509670276.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:16.855Z,1509670276.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:17.238Z,1509670277.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:17.256Z,1509670277.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:17.639Z,1509670277.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:17.659Z,1509670277.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:18.013Z,1509670278.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:18.054Z,1509670278.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:18.426Z,1509670278.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:18.445Z,1509670278.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:18.829Z,1509670278.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:18.848Z,1509670278.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:19.230Z,1509670279.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:19.249Z,1509670279.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:19.625Z,1509670279.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:19.651Z,1509670279.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:20.034Z,1509670280.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:20.050Z,1509670280.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:20.438Z,1509670280.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:20.457Z,1509670280.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:20.842Z,1509670280.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:20.857Z,1509670280.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:21.228Z,1509670281.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:21.265Z,1509670281.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:21.628Z,1509670281.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:21.643Z,1509670281.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:22.026Z,1509670282.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:22.049Z,1509670282.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:22.427Z,1509670282.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:22.447Z,1509670282.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:22.836Z,1509670282.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:22.852Z,1509670282.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:23.237Z,1509670283.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:23.262Z,1509670283.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:23.633Z,1509670283.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:23.653Z,1509670283.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:24.027Z,1509670284.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:24.046Z,1509670284.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:24.426Z,1509670284.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:24.460Z,1509670284.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:24.834Z,1509670284.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:24.858Z,1509670284.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:25.214Z,1509670285.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:25.251Z,1509670285.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:25.620Z,1509670285.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:25.649Z,1509670285.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:25.653Z,1509670285.653 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T00:46:25.4Z
2017-11-03T00:51:25.653Z,1509670285.653 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T00:51:25.653Z,1509670285.653 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T00:51:28.714Z,1509670288.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:28.722Z,1509670288.722 [BPC1](ERROR): Failed to receive battery data
2017-11-03T00:51:28.722Z,1509670288.722 [BPC1] Communications Fault, FailCount= 1
2017-11-03T00:51:28.722Z,1509670288.722 [BPC1](ERROR): Communications Fault
2017-11-03T00:51:28.753Z,1509670288.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:28.834Z,1509670288.834 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T00:51:38.493Z,1509670298.493 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0016.lzma
2017-11-03T00:51:38.540Z,1509670298.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:38.557Z,1509670298.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:38.645Z,1509670298.645 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T00:51:38.689Z,1509670298.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:38.726Z,1509670298.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:39.063Z,1509670299.063 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0016.lzma.bak
2017-11-03T00:51:39.063Z,1509670299.063 [DataOverHttps](INFO): SBD MOMSN=5182316
2017-11-03T00:51:39.085Z,1509670299.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:39.100Z,1509670299.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:39.188Z,1509670299.188 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:51:39.189Z,1509670299.189 [BPC1] No Fault, FailCount= 1
2017-11-03T00:51:39.753Z,1509670299.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:39.835Z,1509670299.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:39.964Z,1509670299.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:40.023Z,1509670300.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:43.078Z,1509670303.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:43.129Z,1509670303.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:43.282Z,1509670303.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:43.297Z,1509670303.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:43.684Z,1509670303.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:43.707Z,1509670303.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:44.082Z,1509670304.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:44.102Z,1509670304.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:44.462Z,1509670304.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:44.495Z,1509670304.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:44.860Z,1509670304.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:44.886Z,1509670304.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:47.943Z,1509670307.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:47.959Z,1509670307.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:48.085Z,1509670308.085 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20171103T001125/Express0017.lzma
2017-11-03T00:51:48.107Z,1509670308.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:48.143Z,1509670308.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:48.526Z,1509670308.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:48.541Z,1509670308.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:48.887Z,1509670308.887 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0017.lzma.bak
2017-11-03T00:51:48.887Z,1509670308.887 [DataOverHttps](INFO): SBD MOMSN=5182318
2017-11-03T00:51:48.938Z,1509670308.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:48.958Z,1509670308.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:49.510Z,1509670309.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:49.539Z,1509670309.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:49.542Z,1509670309.542 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T00:51:49.542Z,1509670309.542 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T00:51:49.542Z,1509670309.542 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T00:51:49.707Z,1509670309.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:49.734Z,1509670309.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:52.821Z,1509670312.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:52.841Z,1509670312.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:52.992Z,1509670312.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:53.023Z,1509670313.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:53.413Z,1509670313.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:53.429Z,1509670313.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:53.821Z,1509670313.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:53.842Z,1509670313.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:54.213Z,1509670314.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:54.235Z,1509670314.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:54.595Z,1509670314.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:54.626Z,1509670314.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:54.994Z,1509670314.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:55.094Z,1509670315.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:55.388Z,1509670315.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:55.403Z,1509670315.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:55.813Z,1509670315.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:55.835Z,1509670315.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:56.214Z,1509670316.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:56.255Z,1509670316.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:56.613Z,1509670316.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:56.628Z,1509670316.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:56.996Z,1509670316.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:57.047Z,1509670317.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:57.395Z,1509670317.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:57.439Z,1509670317.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:57.814Z,1509670317.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:57.835Z,1509670317.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:58.213Z,1509670318.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:58.235Z,1509670318.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:58.614Z,1509670318.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:58.634Z,1509670318.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:58.990Z,1509670318.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:59.025Z,1509670319.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:59.393Z,1509670319.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:59.408Z,1509670319.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:51:59.813Z,1509670319.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:51:59.834Z,1509670319.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:00.217Z,1509670320.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:00.232Z,1509670320.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:00.612Z,1509670320.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:00.627Z,1509670320.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:00.996Z,1509670320.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:01.029Z,1509670321.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:01.393Z,1509670321.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:01.408Z,1509670321.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:01.796Z,1509670321.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:01.820Z,1509670321.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:02.194Z,1509670322.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:02.225Z,1509670322.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:02.593Z,1509670322.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:02.608Z,1509670322.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:03.006Z,1509670323.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:03.032Z,1509670323.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:03.406Z,1509670323.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:03.433Z,1509670323.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:03.806Z,1509670323.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:03.832Z,1509670323.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:04.192Z,1509670324.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:04.231Z,1509670324.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:04.599Z,1509670324.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:04.615Z,1509670324.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:05.000Z,1509670325.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:05.016Z,1509670325.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:05.392Z,1509670325.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:05.415Z,1509670325.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:05.813Z,1509670325.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:05.839Z,1509670325.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:06.205Z,1509670326.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:06.237Z,1509670326.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:06.605Z,1509670326.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:06.637Z,1509670326.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:06.000Z,1509670327.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:07.015Z,1509670327.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:07.396Z,1509670327.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:07.411Z,1509670327.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:07.809Z,1509670327.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:07.834Z,1509670327.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:08.210Z,1509670328.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:08.234Z,1509670328.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:08.606Z,1509670328.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:08.636Z,1509670328.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:08.997Z,1509670328.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:09.012Z,1509670329.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:09.401Z,1509670329.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:09.436Z,1509670329.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:09.805Z,1509670329.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:09.895Z,1509670329.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:10.209Z,1509670330.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:10.244Z,1509670330.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:10.609Z,1509670330.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:10.663Z,1509670330.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:10.996Z,1509670330.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:11.011Z,1509670331.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:11.397Z,1509670331.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:11.454Z,1509670331.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:11.801Z,1509670331.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:11.851Z,1509670331.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:12.197Z,1509670332.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:12.212Z,1509670332.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:12.597Z,1509670332.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:12.612Z,1509670332.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:13.013Z,1509670333.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:13.044Z,1509670333.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:13.409Z,1509670333.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:13.440Z,1509670333.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:13.809Z,1509670333.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:13.841Z,1509670333.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:14.198Z,1509670334.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:14.213Z,1509670334.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:14.596Z,1509670334.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:14.611Z,1509670334.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:14.998Z,1509670334.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:15.013Z,1509670335.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:15.398Z,1509670335.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:15.413Z,1509670335.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:15.802Z,1509670335.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:15.823Z,1509670335.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:16.214Z,1509670336.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:16.243Z,1509670336.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:16.603Z,1509670336.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:16.618Z,1509670336.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:16.996Z,1509670336.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:17.012Z,1509670337.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:17.425Z,1509670337.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:17.440Z,1509670337.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:17.810Z,1509670337.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:17.834Z,1509670337.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:18.227Z,1509670338.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:18.289Z,1509670338.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:18.615Z,1509670338.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:18.631Z,1509670338.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:18.996Z,1509670338.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:19.029Z,1509670339.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:19.389Z,1509670339.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:19.403Z,1509670339.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:19.805Z,1509670339.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:19.840Z,1509670339.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:20.218Z,1509670340.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:20.235Z,1509670340.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:20.606Z,1509670340.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:20.636Z,1509670340.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:20.996Z,1509670340.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:21.030Z,1509670341.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:21.395Z,1509670341.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:21.433Z,1509670341.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:21.806Z,1509670341.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:21.839Z,1509670341.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:22.205Z,1509670342.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:22.231Z,1509670342.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:22.618Z,1509670342.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:22.638Z,1509670342.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:22.995Z,1509670342.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:23.030Z,1509670343.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:23.392Z,1509670343.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:23.430Z,1509670343.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:23.795Z,1509670343.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:23.891Z,1509670343.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:24.200Z,1509670344.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:24.215Z,1509670344.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:24.592Z,1509670344.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:24.607Z,1509670344.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:25.013Z,1509670345.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:25.063Z,1509670345.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:25.405Z,1509670345.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:25.436Z,1509670345.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:25.805Z,1509670345.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:25.855Z,1509670345.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:26.192Z,1509670346.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:26.237Z,1509670346.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:26.592Z,1509670346.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:26.607Z,1509670346.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:26.993Z,1509670346.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:27.007Z,1509670347.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:27.392Z,1509670347.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:27.407Z,1509670347.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:27.806Z,1509670347.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:27.836Z,1509670347.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:28.209Z,1509670348.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:28.234Z,1509670348.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:28.605Z,1509670348.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:28.637Z,1509670348.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:28.992Z,1509670348.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:29.015Z,1509670349.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:29.392Z,1509670349.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:29.407Z,1509670349.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:29.805Z,1509670349.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:29.836Z,1509670349.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:30.205Z,1509670350.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:30.239Z,1509670350.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:30.609Z,1509670350.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:30.641Z,1509670350.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:30.991Z,1509670350.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:31.006Z,1509670351.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:31.392Z,1509670351.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:31.407Z,1509670351.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:31.796Z,1509670351.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:31.811Z,1509670351.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:32.192Z,1509670352.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:32.206Z,1509670352.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:32.592Z,1509670352.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:32.607Z,1509670352.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:33.009Z,1509670353.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:33.041Z,1509670353.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:33.405Z,1509670353.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:33.440Z,1509670353.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:33.809Z,1509670353.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:33.841Z,1509670353.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:34.195Z,1509670354.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:34.215Z,1509670354.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:34.599Z,1509670354.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:34.613Z,1509670354.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:34.998Z,1509670354.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:35.013Z,1509670355.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:35.396Z,1509670355.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:35.411Z,1509670355.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:35.806Z,1509670355.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:35.842Z,1509670355.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:36.205Z,1509670356.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:36.221Z,1509670356.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:36.606Z,1509670356.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:36.690Z,1509670356.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:36.998Z,1509670356.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:37.024Z,1509670357.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:37.401Z,1509670357.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:37.415Z,1509670357.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:37.808Z,1509670357.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:37.823Z,1509670357.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:38.209Z,1509670358.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:38.293Z,1509670358.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:38.613Z,1509670358.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:38.628Z,1509670358.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:39.002Z,1509670359.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:39.017Z,1509670359.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:39.406Z,1509670359.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:39.458Z,1509670359.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:39.813Z,1509670359.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:39.827Z,1509670359.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:40.212Z,1509670360.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:40.262Z,1509670360.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:40.610Z,1509670360.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:40.624Z,1509670360.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:41.002Z,1509670361.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:41.058Z,1509670361.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:41.400Z,1509670361.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:41.415Z,1509670361.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:41.813Z,1509670361.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:41.834Z,1509670361.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:42.212Z,1509670362.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:42.235Z,1509670362.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:42.612Z,1509670362.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:42.627Z,1509670362.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:42.998Z,1509670362.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:43.012Z,1509670363.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:43.400Z,1509670363.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:43.415Z,1509670363.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:43.800Z,1509670363.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:43.815Z,1509670363.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:44.198Z,1509670364.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:44.213Z,1509670364.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:44.603Z,1509670364.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:44.623Z,1509670364.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:44.705Z,1509670364.705 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:52:44.705Z,1509670364.705 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T00:52:44.884Z,1509670364.884 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:52:44.885Z,1509670364.885 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:52:44.885Z,1509670364.885 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:52:44.885Z,1509670364.885 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:52:45.012Z,1509670365.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:45.035Z,1509670365.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:45.409Z,1509670365.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:45.424Z,1509670365.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:45.812Z,1509670365.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:45.827Z,1509670365.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:46.200Z,1509670366.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:46.215Z,1509670366.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:46.601Z,1509670366.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:46.621Z,1509670366.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:47.001Z,1509670367.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:47.017Z,1509670367.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:47.400Z,1509670367.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:47.415Z,1509670367.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:47.812Z,1509670367.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:47.827Z,1509670367.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:48.211Z,1509670368.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:48.231Z,1509670368.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:48.612Z,1509670368.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:48.635Z,1509670368.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:49.010Z,1509670369.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:49.062Z,1509670369.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:49.120Z,1509670369.120 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:52:49.199Z,1509670369.199 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:52:49.200Z,1509670369.200 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:52:49.205Z,1509670369.205 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:52:49.206Z,1509670369.206 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:52:49.413Z,1509670369.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:49.431Z,1509670369.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:49.794Z,1509670369.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:49.821Z,1509670369.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:50.210Z,1509670370.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:50.225Z,1509670370.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:53.370Z,1509670373.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:53.455Z,1509670373.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:53.624Z,1509670373.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:53.659Z,1509670373.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:54.022Z,1509670374.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:54.055Z,1509670374.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:54.426Z,1509670374.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:54.486Z,1509670374.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:54.803Z,1509670374.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:54.829Z,1509670374.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:55.250Z,1509670375.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:55.303Z,1509670375.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:55.601Z,1509670375.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:55.674Z,1509670375.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:56.036Z,1509670376.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:56.114Z,1509670376.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:56.413Z,1509670376.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:56.453Z,1509670376.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:56.814Z,1509670376.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:56.829Z,1509670376.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:57.209Z,1509670377.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:57.224Z,1509670377.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:57.610Z,1509670377.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:57.625Z,1509670377.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:58.009Z,1509670378.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:58.024Z,1509670378.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:58.410Z,1509670378.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:58.425Z,1509670378.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:58.812Z,1509670378.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:58.827Z,1509670378.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:59.246Z,1509670379.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:59.266Z,1509670379.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:52:59.614Z,1509670379.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:52:59.629Z,1509670379.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:00.010Z,1509670380.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:00.025Z,1509670380.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:00.413Z,1509670380.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:00.428Z,1509670380.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:00.810Z,1509670380.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:00.825Z,1509670380.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:01.210Z,1509670381.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:01.251Z,1509670381.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:01.612Z,1509670381.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:01.640Z,1509670381.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:02.016Z,1509670382.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:02.039Z,1509670382.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:02.417Z,1509670382.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:02.433Z,1509670382.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:02.816Z,1509670382.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:02.831Z,1509670382.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:03.221Z,1509670383.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:03.242Z,1509670383.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:03.610Z,1509670383.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:03.631Z,1509670383.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:04.009Z,1509670384.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:04.025Z,1509670384.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:04.412Z,1509670384.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:04.427Z,1509670384.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:04.856Z,1509670384.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:04.907Z,1509670384.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:05.233Z,1509670385.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:05.272Z,1509670385.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:05.616Z,1509670385.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:05.632Z,1509670385.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:06.010Z,1509670386.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:06.025Z,1509670386.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:06.412Z,1509670386.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:06.427Z,1509670386.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:06.808Z,1509670386.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:06.824Z,1509670386.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:07.234Z,1509670387.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:07.263Z,1509670387.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:07.610Z,1509670387.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:07.678Z,1509670387.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:08.021Z,1509670388.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:08.086Z,1509670388.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:08.417Z,1509670388.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:08.432Z,1509670388.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:08.821Z,1509670388.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:08.882Z,1509670388.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:09.211Z,1509670389.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:09.225Z,1509670389.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:09.614Z,1509670389.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:09.667Z,1509670389.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:10.010Z,1509670390.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:10.070Z,1509670390.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:10.410Z,1509670390.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:10.425Z,1509670390.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:10.823Z,1509670390.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:10.839Z,1509670390.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:11.224Z,1509670391.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:11.245Z,1509670391.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:11.681Z,1509670391.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:11.719Z,1509670391.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:12.011Z,1509670392.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:12.046Z,1509670392.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:12.411Z,1509670392.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:12.427Z,1509670392.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:12.811Z,1509670392.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:12.827Z,1509670392.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:13.198Z,1509670393.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:13.224Z,1509670393.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:13.612Z,1509670393.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:13.673Z,1509670393.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:14.022Z,1509670394.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:14.038Z,1509670394.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:14.422Z,1509670394.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:14.443Z,1509670394.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:14.818Z,1509670394.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:14.833Z,1509670394.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:15.199Z,1509670395.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:15.230Z,1509670395.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:15.601Z,1509670395.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:15.631Z,1509670395.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:16.004Z,1509670396.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:16.029Z,1509670396.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:16.400Z,1509670396.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:16.430Z,1509670396.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:16.821Z,1509670396.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:16.836Z,1509670396.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:17.238Z,1509670397.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:17.259Z,1509670397.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:17.622Z,1509670397.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:17.658Z,1509670397.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:18.003Z,1509670398.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:18.035Z,1509670398.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:18.400Z,1509670398.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:18.415Z,1509670398.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:18.799Z,1509670398.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:18.819Z,1509670398.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:19.216Z,1509670399.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:19.254Z,1509670399.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:19.600Z,1509670399.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:19.615Z,1509670399.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:20.017Z,1509670400.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:20.042Z,1509670400.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:20.421Z,1509670400.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:20.453Z,1509670400.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:20.813Z,1509670400.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:20.845Z,1509670400.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:21.219Z,1509670401.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:21.275Z,1509670401.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:21.607Z,1509670401.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:21.623Z,1509670401.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:22.004Z,1509670402.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:22.074Z,1509670402.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:22.406Z,1509670402.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:22.466Z,1509670402.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:22.816Z,1509670402.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:22.831Z,1509670402.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:23.216Z,1509670403.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:23.270Z,1509670403.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:23.616Z,1509670403.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:23.631Z,1509670403.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:24.009Z,1509670404.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:24.055Z,1509670404.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:24.411Z,1509670404.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:24.466Z,1509670404.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:24.808Z,1509670404.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:24.831Z,1509670404.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:25.213Z,1509670405.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:25.228Z,1509670405.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:25.610Z,1509670405.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:25.689Z,1509670405.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:26.020Z,1509670406.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:26.065Z,1509670406.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:26.420Z,1509670406.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:26.443Z,1509670406.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:26.820Z,1509670406.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:26.835Z,1509670406.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:27.208Z,1509670407.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:27.233Z,1509670407.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:27.611Z,1509670407.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:27.688Z,1509670407.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:28.011Z,1509670408.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:28.031Z,1509670408.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:28.410Z,1509670408.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:28.431Z,1509670408.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:28.820Z,1509670408.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:28.841Z,1509670408.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:29.220Z,1509670409.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:29.239Z,1509670409.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:29.620Z,1509670409.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:29.635Z,1509670409.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:30.007Z,1509670410.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:30.026Z,1509670410.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:30.410Z,1509670410.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:30.433Z,1509670410.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:30.810Z,1509670410.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:30.831Z,1509670410.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:31.208Z,1509670411.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:31.231Z,1509670411.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:31.610Z,1509670411.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:31.625Z,1509670411.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:32.020Z,1509670412.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:32.044Z,1509670412.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:32.421Z,1509670412.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:32.435Z,1509670412.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:32.830Z,1509670412.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:32.861Z,1509670412.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:33.220Z,1509670413.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:33.235Z,1509670413.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:33.608Z,1509670413.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:33.628Z,1509670413.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:34.012Z,1509670414.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:34.027Z,1509670414.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:34.410Z,1509670414.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:34.425Z,1509670414.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:34.818Z,1509670414.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:34.833Z,1509670414.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:35.240Z,1509670415.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:35.269Z,1509670415.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:35.621Z,1509670415.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:35.663Z,1509670415.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:36.011Z,1509670416.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:36.026Z,1509670416.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:36.411Z,1509670416.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:36.499Z,1509670416.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:36.801Z,1509670416.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:36.834Z,1509670416.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:37.204Z,1509670417.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:37.273Z,1509670417.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:37.599Z,1509670417.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:37.634Z,1509670417.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:38.022Z,1509670418.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:38.078Z,1509670418.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:38.422Z,1509670418.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:38.482Z,1509670418.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:38.821Z,1509670418.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:38.836Z,1509670418.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:39.199Z,1509670419.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:39.235Z,1509670419.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:39.600Z,1509670419.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:39.686Z,1509670419.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:40.002Z,1509670420.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:40.017Z,1509670420.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:40.400Z,1509670420.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:40.415Z,1509670420.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:40.813Z,1509670420.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:40.845Z,1509670420.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:41.213Z,1509670421.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:41.228Z,1509670421.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:41.650Z,1509670421.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:41.715Z,1509670421.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:42.004Z,1509670422.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:42.051Z,1509670422.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:42.403Z,1509670422.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:42.419Z,1509670422.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:42.803Z,1509670422.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:42.823Z,1509670422.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:43.213Z,1509670423.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:43.228Z,1509670423.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:43.604Z,1509670423.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:43.619Z,1509670423.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:44.013Z,1509670424.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:44.029Z,1509670424.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:44.429Z,1509670424.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:44.457Z,1509670424.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:44.810Z,1509670424.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:44.825Z,1509670424.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:45.211Z,1509670425.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:45.231Z,1509670425.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:45.610Z,1509670425.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:45.625Z,1509670425.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:46.010Z,1509670426.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:46.025Z,1509670426.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:46.410Z,1509670426.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:46.425Z,1509670426.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:46.813Z,1509670426.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:46.829Z,1509670426.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:47.229Z,1509670427.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:47.260Z,1509670427.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:47.614Z,1509670427.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:47.629Z,1509670427.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:48.010Z,1509670428.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:48.025Z,1509670428.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:48.403Z,1509670428.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:48.430Z,1509670428.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:48.810Z,1509670428.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:48.825Z,1509670428.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:49.225Z,1509670429.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:49.262Z,1509670429.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:49.609Z,1509670429.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:49.624Z,1509670429.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:50.017Z,1509670430.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:50.039Z,1509670430.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:50.418Z,1509670430.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:50.479Z,1509670430.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:53.602Z,1509670433.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:53.723Z,1509670433.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:53.864Z,1509670433.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:53.879Z,1509670433.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:54.262Z,1509670434.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:54.318Z,1509670434.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:54.659Z,1509670434.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:54.675Z,1509670434.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:55.072Z,1509670435.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:55.123Z,1509670435.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:55.123Z,1509670435.123 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2017-11-03T00:53:55.123Z,1509670435.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:53:55.125Z,1509670435.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:55.125Z,1509670435.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2017-11-03T00:53:55.125Z,1509670435.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:53:55.127Z,1509670435.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:55.127Z,1509670435.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-11-03T00:53:55.127Z,1509670435.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:53:55.205Z,1509670435.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:53:55.205Z,1509670435.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:53:55.205Z,1509670435.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:53:55.470Z,1509670435.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:55.608Z,1509670435.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:53:55.608Z,1509670435.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2017-11-03T00:53:55.609Z,1509670435.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:53:55.609Z,1509670435.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2017-11-03T00:53:55.609Z,1509670435.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:53:55.609Z,1509670435.609 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-11-03T00:53:55.876Z,1509670435.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:55.890Z,1509670435.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:53:55.891Z,1509670435.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:53:55.891Z,1509670435.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:53:55.891Z,1509670435.891 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:53:55.892Z,1509670435.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:53:55.892Z,1509670435.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:53:55.893Z,1509670435.893 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:53:55.893Z,1509670435.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:53:55.893Z,1509670435.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:53:56.252Z,1509670436.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:56.278Z,1509670436.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:56.653Z,1509670436.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:56.679Z,1509670436.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:57.056Z,1509670437.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:57.140Z,1509670437.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:57.455Z,1509670437.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:57.489Z,1509670437.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:57.874Z,1509670437.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:57.889Z,1509670437.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:58.266Z,1509670438.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:58.287Z,1509670438.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:58.674Z,1509670438.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:58.689Z,1509670438.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:59.049Z,1509670439.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:59.137Z,1509670439.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:59.449Z,1509670439.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:59.476Z,1509670439.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:53:59.853Z,1509670439.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:53:59.887Z,1509670439.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:00.249Z,1509670440.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:00.283Z,1509670440.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:00.655Z,1509670440.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:00.687Z,1509670440.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:01.074Z,1509670441.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:01.157Z,1509670441.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:01.466Z,1509670441.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:01.493Z,1509670441.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:01.862Z,1509670441.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:01.888Z,1509670441.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:02.252Z,1509670442.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:02.268Z,1509670442.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:02.655Z,1509670442.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:02.691Z,1509670442.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:03.054Z,1509670443.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:03.085Z,1509670443.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:03.459Z,1509670443.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:03.494Z,1509670443.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:03.866Z,1509670443.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:03.892Z,1509670443.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:04.266Z,1509670444.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:04.291Z,1509670444.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:04.666Z,1509670444.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:04.691Z,1509670444.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:05.053Z,1509670445.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:05.068Z,1509670445.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:05.471Z,1509670445.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:05.494Z,1509670445.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:05.859Z,1509670445.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:05.895Z,1509670445.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:06.253Z,1509670446.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:06.267Z,1509670446.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:06.657Z,1509670446.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:06.672Z,1509670446.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:07.070Z,1509670447.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:07.100Z,1509670447.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:07.470Z,1509670447.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:07.526Z,1509670447.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:07.874Z,1509670447.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:07.923Z,1509670447.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:08.256Z,1509670448.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:08.271Z,1509670448.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:08.657Z,1509670448.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:08.672Z,1509670448.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:09.061Z,1509670449.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:09.119Z,1509670449.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:09.456Z,1509670449.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:09.471Z,1509670449.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:09.877Z,1509670449.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:09.947Z,1509670449.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:10.270Z,1509670450.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:10.315Z,1509670450.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:10.670Z,1509670450.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:10.701Z,1509670450.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:11.057Z,1509670451.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:11.123Z,1509670451.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:11.462Z,1509670451.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:11.477Z,1509670451.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:11.859Z,1509670451.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:11.878Z,1509670451.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:12.263Z,1509670452.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:12.283Z,1509670452.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:12.663Z,1509670452.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:12.678Z,1509670452.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:13.066Z,1509670453.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:13.147Z,1509670453.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:13.466Z,1509670453.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:13.482Z,1509670453.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:13.866Z,1509670453.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:13.882Z,1509670453.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:14.258Z,1509670454.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:14.278Z,1509670454.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:14.664Z,1509670454.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:14.679Z,1509670454.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:15.059Z,1509670455.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:15.075Z,1509670455.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:15.454Z,1509670455.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:15.486Z,1509670455.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:15.870Z,1509670455.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:15.891Z,1509670455.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:16.269Z,1509670456.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:16.291Z,1509670456.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:16.669Z,1509670456.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:16.691Z,1509670456.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:17.061Z,1509670457.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:17.082Z,1509670457.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:17.455Z,1509670457.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:17.471Z,1509670457.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:17.860Z,1509670457.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:17.876Z,1509670457.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:18.264Z,1509670458.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:18.279Z,1509670458.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:18.663Z,1509670458.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:18.683Z,1509670458.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:19.068Z,1509670459.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:19.084Z,1509670459.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:19.469Z,1509670459.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:19.485Z,1509670459.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:19.869Z,1509670459.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:19.891Z,1509670459.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:20.263Z,1509670460.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:20.283Z,1509670460.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:20.665Z,1509670460.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:20.680Z,1509670460.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:21.063Z,1509670461.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:21.079Z,1509670461.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:21.460Z,1509670461.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:21.483Z,1509670461.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:21.869Z,1509670461.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:21.884Z,1509670461.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:22.268Z,1509670462.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:22.346Z,1509670462.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:22.673Z,1509670462.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:22.688Z,1509670462.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:23.064Z,1509670463.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:23.078Z,1509670463.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:23.463Z,1509670463.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:23.522Z,1509670463.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:23.851Z,1509670463.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:23.876Z,1509670463.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:24.262Z,1509670464.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:24.322Z,1509670464.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:24.648Z,1509670464.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:24.712Z,1509670464.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:25.092Z,1509670465.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:25.147Z,1509670465.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:25.432Z,1509670465.432 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T00:54:25.432Z,1509670465.432 [NAL9602] Data Fault, FailCount= 4
2017-11-03T00:54:25.432Z,1509670465.432 [NAL9602](ERROR): Data Fault
2017-11-03T00:54:25.449Z,1509670465.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:25.491Z,1509670465.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:25.569Z,1509670465.569 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T00:54:25.838Z,1509670465.838 [NAL9602](INFO): Powering down
2017-11-03T00:54:25.856Z,1509670465.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:25.888Z,1509670465.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:26.252Z,1509670466.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:26.277Z,1509670466.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:26.648Z,1509670466.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:26.677Z,1509670466.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:26.764Z,1509670466.764 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T00:54:26.764Z,1509670466.764 [NAL9602] No Fault, FailCount= 4
2017-11-03T00:54:27.048Z,1509670467.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:27.107Z,1509670467.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:27.452Z,1509670467.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:27.467Z,1509670467.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:27.852Z,1509670467.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:27.866Z,1509670467.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:28.248Z,1509670468.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:28.263Z,1509670468.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:28.652Z,1509670468.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:28.666Z,1509670468.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:29.052Z,1509670469.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:29.066Z,1509670469.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:29.459Z,1509670469.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:29.474Z,1509670469.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:29.859Z,1509670469.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:29.874Z,1509670469.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:30.259Z,1509670470.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:30.273Z,1509670470.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:30.659Z,1509670470.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:30.674Z,1509670470.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:31.059Z,1509670471.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:31.073Z,1509670471.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:31.457Z,1509670471.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:31.473Z,1509670471.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:31.856Z,1509670471.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:31.871Z,1509670471.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:32.259Z,1509670472.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:32.274Z,1509670472.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:32.659Z,1509670472.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:32.674Z,1509670472.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:33.059Z,1509670473.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:33.075Z,1509670473.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:33.458Z,1509670473.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:33.473Z,1509670473.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:33.860Z,1509670473.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:33.875Z,1509670473.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:34.259Z,1509670474.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:34.275Z,1509670474.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:34.659Z,1509670474.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:34.675Z,1509670474.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:35.056Z,1509670475.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:35.075Z,1509670475.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:35.460Z,1509670475.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:35.475Z,1509670475.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:35.858Z,1509670475.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:35.873Z,1509670475.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:36.260Z,1509670476.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:36.275Z,1509670476.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:36.659Z,1509670476.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:36.734Z,1509670476.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:37.060Z,1509670477.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:37.107Z,1509670477.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:37.461Z,1509670477.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:37.476Z,1509670477.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:37.872Z,1509670477.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:37.887Z,1509670477.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:38.261Z,1509670478.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:38.318Z,1509670478.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:38.661Z,1509670478.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:38.676Z,1509670478.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:39.054Z,1509670479.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:39.153Z,1509670479.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:39.459Z,1509670479.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:39.474Z,1509670479.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:39.860Z,1509670479.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:39.918Z,1509670479.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:40.259Z,1509670480.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:40.275Z,1509670480.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:40.660Z,1509670480.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:40.675Z,1509670480.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:41.060Z,1509670481.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:41.116Z,1509670481.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:41.462Z,1509670481.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:41.477Z,1509670481.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:41.852Z,1509670481.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:41.877Z,1509670481.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:42.261Z,1509670482.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:42.277Z,1509670482.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:42.662Z,1509670482.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:42.677Z,1509670482.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:43.050Z,1509670483.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:43.075Z,1509670483.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:43.470Z,1509670483.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:43.488Z,1509670483.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:43.848Z,1509670483.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:43.879Z,1509670483.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:44.254Z,1509670484.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:44.279Z,1509670484.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:44.654Z,1509670484.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:44.680Z,1509670484.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:45.054Z,1509670485.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:45.080Z,1509670485.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:45.208Z,1509670485.208 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:54:45.208Z,1509670485.208 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T00:54:45.208Z,1509670485.208 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:54:45.451Z,1509670485.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:45.481Z,1509670485.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:54:45.482Z,1509670485.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:45.573Z,1509670485.573 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:54:45.612Z,1509670485.612 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:54:45.712Z,1509670485.712 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:54:45.859Z,1509670485.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:45.886Z,1509670485.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:54:45.887Z,1509670485.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:46.254Z,1509670486.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:46.281Z,1509670486.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:54:46.282Z,1509670486.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:46.654Z,1509670486.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:46.682Z,1509670486.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:54:46.683Z,1509670486.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:47.052Z,1509670487.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:47.082Z,1509670487.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:54:47.083Z,1509670487.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:47.177Z,1509670487.177 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:54:47.177Z,1509670487.177 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T00:54:47.328Z,1509670487.328 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:54:47.329Z,1509670487.329 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:54:47.329Z,1509670487.329 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:54:47.329Z,1509670487.329 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:54:47.454Z,1509670487.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:47.480Z,1509670487.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:54:47.481Z,1509670487.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:47.853Z,1509670487.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:47.886Z,1509670487.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:54:47.887Z,1509670487.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:48.256Z,1509670488.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:48.282Z,1509670488.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:54:48.283Z,1509670488.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:48.653Z,1509670488.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:48.693Z,1509670488.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:54:48.694Z,1509670488.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:49.053Z,1509670489.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:49.081Z,1509670489.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T00:54:49.082Z,1509670489.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:49.453Z,1509670489.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:49.481Z,1509670489.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T00:54:49.481Z,1509670489.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:49.852Z,1509670489.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:49.881Z,1509670489.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T00:54:49.882Z,1509670489.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:50.253Z,1509670490.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:50.281Z,1509670490.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T00:54:50.282Z,1509670490.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:50.656Z,1509670490.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:50.684Z,1509670490.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T00:54:50.685Z,1509670490.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:51.515Z,1509670491.515 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:54:51.607Z,1509670491.607 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:54:51.608Z,1509670491.608 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:54:51.609Z,1509670491.609 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:54:51.610Z,1509670491.610 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:54:54.252Z,1509670494.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:54.348Z,1509670494.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:54.495Z,1509670494.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:54.515Z,1509670494.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:54.893Z,1509670494.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:54.909Z,1509670494.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:55.302Z,1509670495.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:55.338Z,1509670495.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:55.693Z,1509670495.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:55.741Z,1509670495.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:56.075Z,1509670496.075 [NAL9602](INFO): Powering up NAL9602
2017-11-03T00:54:56.092Z,1509670496.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:56.115Z,1509670496.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:56.492Z,1509670496.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:56.539Z,1509670496.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:56.892Z,1509670496.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:56.908Z,1509670496.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:57.299Z,1509670497.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:57.351Z,1509670497.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:57.692Z,1509670497.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:57.707Z,1509670497.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:58.092Z,1509670498.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:58.107Z,1509670498.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:58.492Z,1509670498.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:58.510Z,1509670498.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:58.891Z,1509670498.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:58.906Z,1509670498.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:59.296Z,1509670499.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:59.311Z,1509670499.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:54:59.688Z,1509670499.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:54:59.702Z,1509670499.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:00.087Z,1509670500.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:00.102Z,1509670500.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:00.495Z,1509670500.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:00.510Z,1509670500.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:00.891Z,1509670500.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:00.905Z,1509670500.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:01.299Z,1509670501.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:01.314Z,1509670501.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:01.692Z,1509670501.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:01.707Z,1509670501.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:02.089Z,1509670502.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:02.104Z,1509670502.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:02.491Z,1509670502.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:02.507Z,1509670502.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:02.891Z,1509670502.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:02.907Z,1509670502.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:03.292Z,1509670503.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:03.311Z,1509670503.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:03.691Z,1509670503.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:03.707Z,1509670503.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:04.091Z,1509670504.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:04.107Z,1509670504.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:04.487Z,1509670504.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:04.502Z,1509670504.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:04.887Z,1509670504.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:04.902Z,1509670504.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:05.292Z,1509670505.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:05.307Z,1509670505.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:05.690Z,1509670505.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:05.722Z,1509670505.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:06.098Z,1509670506.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:06.113Z,1509670506.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:06.497Z,1509670506.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:06.512Z,1509670506.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:06.902Z,1509670506.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:06.918Z,1509670506.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:07.271Z,1509670507.271 [NAL9602](INFO): NAL9602 initialized
2017-11-03T00:55:07.301Z,1509670507.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:07.316Z,1509670507.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:07.706Z,1509670507.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:07.750Z,1509670507.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:08.105Z,1509670508.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:08.122Z,1509670508.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:08.501Z,1509670508.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:08.517Z,1509670508.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:08.898Z,1509670508.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:08.913Z,1509670508.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:09.298Z,1509670509.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:09.382Z,1509670509.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:09.717Z,1509670509.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:09.732Z,1509670509.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:10.098Z,1509670510.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:10.158Z,1509670510.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:10.486Z,1509670510.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:10.518Z,1509670510.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:10.904Z,1509670510.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:10.958Z,1509670510.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:11.311Z,1509670511.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:11.363Z,1509670511.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:11.710Z,1509670511.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:11.725Z,1509670511.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:12.091Z,1509670512.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:12.119Z,1509670512.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:12.491Z,1509670512.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:12.526Z,1509670512.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:12.902Z,1509670512.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:12.923Z,1509670512.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:13.288Z,1509670513.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:13.316Z,1509670513.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:13.715Z,1509670513.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:13.735Z,1509670513.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:14.114Z,1509670514.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:14.135Z,1509670514.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:14.506Z,1509670514.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:14.523Z,1509670514.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:14.890Z,1509670514.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:14.918Z,1509670514.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:15.287Z,1509670515.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:15.315Z,1509670515.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:15.684Z,1509670515.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:15.712Z,1509670515.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:16.085Z,1509670516.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:16.100Z,1509670516.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:16.488Z,1509670516.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:16.503Z,1509670516.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:16.897Z,1509670516.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:16.936Z,1509670516.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:17.301Z,1509670517.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:17.332Z,1509670517.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:17.701Z,1509670517.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:17.736Z,1509670517.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:18.091Z,1509670518.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:18.106Z,1509670518.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:18.492Z,1509670518.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:18.506Z,1509670518.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:18.892Z,1509670518.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:18.907Z,1509670518.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:19.296Z,1509670519.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:19.311Z,1509670519.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:19.701Z,1509670519.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:19.717Z,1509670519.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:20.101Z,1509670520.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:20.117Z,1509670520.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:20.505Z,1509670520.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:20.521Z,1509670520.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:20.895Z,1509670520.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:20.915Z,1509670520.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:21.297Z,1509670521.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:21.312Z,1509670521.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:21.712Z,1509670521.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:21.748Z,1509670521.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:22.098Z,1509670522.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:22.114Z,1509670522.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:22.496Z,1509670522.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:22.519Z,1509670522.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:22.905Z,1509670522.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:22.921Z,1509670522.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:23.304Z,1509670523.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:23.363Z,1509670523.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:23.722Z,1509670523.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:23.779Z,1509670523.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:24.096Z,1509670524.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:24.112Z,1509670524.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:24.498Z,1509670524.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:24.547Z,1509670524.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:24.901Z,1509670524.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:24.915Z,1509670524.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:25.293Z,1509670525.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:25.350Z,1509670525.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:25.710Z,1509670525.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:25.767Z,1509670525.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:26.108Z,1509670526.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:26.131Z,1509670526.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:26.504Z,1509670526.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:26.520Z,1509670526.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:26.900Z,1509670526.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:26.915Z,1509670526.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:27.306Z,1509670527.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:27.321Z,1509670527.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:27.699Z,1509670527.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:27.714Z,1509670527.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:28.097Z,1509670528.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:28.111Z,1509670528.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:28.493Z,1509670528.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:28.514Z,1509670528.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:28.905Z,1509670528.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:28.920Z,1509670528.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:29.313Z,1509670529.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:29.351Z,1509670529.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:29.708Z,1509670529.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:29.731Z,1509670529.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:30.098Z,1509670530.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:30.113Z,1509670530.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:30.497Z,1509670530.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:30.519Z,1509670530.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:30.898Z,1509670530.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:30.913Z,1509670530.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:31.293Z,1509670531.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:31.314Z,1509670531.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:31.709Z,1509670531.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:31.731Z,1509670531.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:32.108Z,1509670532.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:32.123Z,1509670532.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:32.507Z,1509670532.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:32.523Z,1509670532.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:32.900Z,1509670532.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:32.915Z,1509670532.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:33.297Z,1509670533.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:33.311Z,1509670533.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:33.687Z,1509670533.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:33.718Z,1509670533.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:34.090Z,1509670534.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:34.117Z,1509670534.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:34.489Z,1509670534.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:34.519Z,1509670534.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:34.909Z,1509670534.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:34.925Z,1509670534.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:35.309Z,1509670535.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:35.324Z,1509670535.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:35.726Z,1509670535.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:35.741Z,1509670535.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:36.088Z,1509670536.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:36.116Z,1509670536.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:36.489Z,1509670536.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:36.523Z,1509670536.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:36.890Z,1509670536.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:36.918Z,1509670536.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:37.291Z,1509670537.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:37.343Z,1509670537.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:37.728Z,1509670537.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:37.786Z,1509670537.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:38.114Z,1509670538.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:38.135Z,1509670538.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:38.510Z,1509670538.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:38.567Z,1509670538.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:38.890Z,1509670538.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:38.922Z,1509670538.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:39.295Z,1509670539.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:39.347Z,1509670539.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:39.689Z,1509670539.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:39.743Z,1509670539.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:40.090Z,1509670540.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:40.129Z,1509670540.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:40.490Z,1509670540.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:40.527Z,1509670540.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:40.902Z,1509670540.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:40.935Z,1509670540.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:41.302Z,1509670541.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:41.339Z,1509670541.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:41.716Z,1509670541.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:41.732Z,1509670541.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:42.095Z,1509670542.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:42.131Z,1509670542.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:42.489Z,1509670542.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:42.503Z,1509670542.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:42.890Z,1509670542.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:42.905Z,1509670542.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:43.295Z,1509670543.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:43.327Z,1509670543.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:43.705Z,1509670543.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:43.733Z,1509670543.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:44.101Z,1509670544.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:44.135Z,1509670544.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:44.509Z,1509670544.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:44.534Z,1509670544.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:44.895Z,1509670544.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:44.943Z,1509670544.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:45.303Z,1509670545.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:45.339Z,1509670545.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:45.696Z,1509670545.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:45.712Z,1509670545.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:46.098Z,1509670546.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:46.113Z,1509670546.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:46.496Z,1509670546.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:46.511Z,1509670546.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:46.901Z,1509670546.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:46.923Z,1509670546.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:47.309Z,1509670547.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:47.359Z,1509670547.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:47.708Z,1509670547.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:47.724Z,1509670547.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:48.099Z,1509670548.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:48.114Z,1509670548.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:48.497Z,1509670548.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:48.511Z,1509670548.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:48.898Z,1509670548.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:48.913Z,1509670548.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:49.299Z,1509670549.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:49.319Z,1509670549.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:49.734Z,1509670549.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:49.762Z,1509670549.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:50.109Z,1509670550.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:50.125Z,1509670550.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:50.509Z,1509670550.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:50.531Z,1509670550.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:50.903Z,1509670550.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:50.923Z,1509670550.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:56.412Z,1509670556.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:56.490Z,1509670556.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:56.634Z,1509670556.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:56.665Z,1509670556.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:57.079Z,1509670557.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:57.169Z,1509670557.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:57.474Z,1509670557.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:57.499Z,1509670557.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:57.856Z,1509670557.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:57.929Z,1509670557.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:58.253Z,1509670558.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:58.303Z,1509670558.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:58.645Z,1509670558.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:58.727Z,1509670558.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:59.066Z,1509670559.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:59.127Z,1509670559.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:59.476Z,1509670559.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:59.502Z,1509670559.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:55:59.859Z,1509670559.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:55:59.903Z,1509670559.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:00.263Z,1509670560.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:00.295Z,1509670560.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:00.676Z,1509670560.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:00.745Z,1509670560.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:01.053Z,1509670561.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:01.094Z,1509670561.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:01.461Z,1509670561.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:01.505Z,1509670561.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:01.848Z,1509670561.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:01.892Z,1509670561.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:02.250Z,1509670562.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:02.295Z,1509670562.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:02.649Z,1509670562.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:02.703Z,1509670562.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:03.065Z,1509670563.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:03.091Z,1509670563.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:03.446Z,1509670563.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:03.461Z,1509670563.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:03.845Z,1509670563.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:03.861Z,1509670563.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:04.246Z,1509670564.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:04.262Z,1509670564.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:04.657Z,1509670564.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:04.690Z,1509670564.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:05.057Z,1509670565.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:05.089Z,1509670565.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:05.450Z,1509670565.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:05.471Z,1509670565.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:05.853Z,1509670565.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:05.868Z,1509670565.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:06.243Z,1509670566.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:06.262Z,1509670566.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:06.658Z,1509670566.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:06.692Z,1509670566.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:07.058Z,1509670567.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:07.126Z,1509670567.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:07.457Z,1509670567.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:07.472Z,1509670567.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:07.849Z,1509670567.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:07.865Z,1509670567.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:08.247Z,1509670568.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:08.263Z,1509670568.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:08.657Z,1509670568.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:08.672Z,1509670568.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:09.054Z,1509670569.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:09.069Z,1509670569.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:09.461Z,1509670569.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:09.519Z,1509670569.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:09.838Z,1509670569.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:09.869Z,1509670569.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:10.237Z,1509670570.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:10.274Z,1509670570.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:10.649Z,1509670570.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:10.675Z,1509670570.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:11.062Z,1509670571.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:11.165Z,1509670571.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:11.453Z,1509670571.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:11.479Z,1509670571.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:11.837Z,1509670571.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:11.852Z,1509670571.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:12.239Z,1509670572.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:12.299Z,1509670572.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:12.653Z,1509670572.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:12.679Z,1509670572.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:13.049Z,1509670573.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:13.095Z,1509670573.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:13.446Z,1509670573.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:13.491Z,1509670573.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:13.845Z,1509670573.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:13.859Z,1509670573.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:14.240Z,1509670574.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:14.255Z,1509670574.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:14.649Z,1509670574.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:14.664Z,1509670574.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:15.057Z,1509670575.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:15.087Z,1509670575.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:15.450Z,1509670575.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:15.465Z,1509670575.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:15.846Z,1509670575.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:15.861Z,1509670575.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:16.241Z,1509670576.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:16.255Z,1509670576.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:16.657Z,1509670576.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:16.687Z,1509670576.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:17.049Z,1509670577.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:17.064Z,1509670577.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:17.457Z,1509670577.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:17.488Z,1509670577.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:17.844Z,1509670577.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:17.863Z,1509670577.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:18.244Z,1509670578.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:18.263Z,1509670578.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:18.657Z,1509670578.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:18.687Z,1509670578.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:19.046Z,1509670579.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:19.061Z,1509670579.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:19.449Z,1509670579.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:19.486Z,1509670579.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:19.852Z,1509670579.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:19.867Z,1509670579.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:20.244Z,1509670580.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:20.263Z,1509670580.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:20.657Z,1509670580.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:20.687Z,1509670580.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:21.057Z,1509670581.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:21.158Z,1509670581.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:21.461Z,1509670581.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:21.476Z,1509670581.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:21.838Z,1509670581.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:21.864Z,1509670581.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:22.237Z,1509670582.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:22.265Z,1509670582.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:22.661Z,1509670582.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:22.676Z,1509670582.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:23.056Z,1509670583.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:23.072Z,1509670583.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:23.458Z,1509670583.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:23.478Z,1509670583.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:23.840Z,1509670583.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:23.871Z,1509670583.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:24.237Z,1509670584.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:24.287Z,1509670584.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:24.662Z,1509670584.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:24.676Z,1509670584.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:25.065Z,1509670585.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:25.142Z,1509670585.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:25.454Z,1509670585.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:25.484Z,1509670585.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:25.840Z,1509670585.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:25.871Z,1509670585.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:26.239Z,1509670586.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:26.254Z,1509670586.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:26.649Z,1509670586.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:26.695Z,1509670586.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:27.045Z,1509670587.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:27.059Z,1509670587.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:27.449Z,1509670587.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:27.495Z,1509670587.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:27.838Z,1509670587.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:27.883Z,1509670587.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:28.235Z,1509670588.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:28.250Z,1509670588.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:28.661Z,1509670588.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:28.677Z,1509670588.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:29.049Z,1509670589.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:29.065Z,1509670589.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:29.454Z,1509670589.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:29.481Z,1509670589.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:29.837Z,1509670589.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:29.852Z,1509670589.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:30.237Z,1509670590.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:30.252Z,1509670590.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:30.653Z,1509670590.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:30.668Z,1509670590.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:31.049Z,1509670591.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:31.064Z,1509670591.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:31.454Z,1509670591.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:31.469Z,1509670591.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:31.840Z,1509670591.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:31.855Z,1509670591.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:32.233Z,1509670592.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:32.248Z,1509670592.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:32.650Z,1509670592.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:32.665Z,1509670592.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:33.045Z,1509670593.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:33.060Z,1509670593.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:33.454Z,1509670593.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:33.469Z,1509670593.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:33.847Z,1509670593.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:33.863Z,1509670593.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:34.237Z,1509670594.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:34.252Z,1509670594.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:34.659Z,1509670594.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:34.739Z,1509670594.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:35.050Z,1509670595.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:35.119Z,1509670595.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:35.450Z,1509670595.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:35.475Z,1509670595.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:35.836Z,1509670595.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:35.851Z,1509670595.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:36.235Z,1509670596.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:36.263Z,1509670596.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:36.661Z,1509670596.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:36.677Z,1509670596.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:37.056Z,1509670597.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:37.071Z,1509670597.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:37.449Z,1509670597.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:37.472Z,1509670597.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:37.838Z,1509670597.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:37.865Z,1509670597.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:38.237Z,1509670598.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:38.272Z,1509670598.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:38.662Z,1509670598.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:38.725Z,1509670598.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:39.058Z,1509670599.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:39.073Z,1509670599.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:39.445Z,1509670599.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:39.479Z,1509670599.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:39.822Z,1509670599.822 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T00:56:39.822Z,1509670599.822 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T00:56:39.822Z,1509670599.822 [DropWeight](ERROR): Hardware Fault
2017-11-03T00:56:39.841Z,1509670599.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:39.911Z,1509670599.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:40.019Z,1509670600.019 [CBIT](INFO): Critical error at 20171103T005639
2017-11-03T00:56:40.021Z,1509670600.021 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T00:56:40.021Z,1509670600.021 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T00:56:40.240Z,1509670600.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:40.255Z,1509670600.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:40.355Z,1509670600.355 [CBIT](INFO): Critical error at 20171103T005640
2017-11-03T00:56:40.650Z,1509670600.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:40.707Z,1509670600.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:41.054Z,1509670601.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:41.076Z,1509670601.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:41.465Z,1509670601.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:41.511Z,1509670601.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:41.843Z,1509670601.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:41.895Z,1509670601.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:42.246Z,1509670602.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:42.262Z,1509670602.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:42.650Z,1509670602.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:42.666Z,1509670602.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:43.053Z,1509670603.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:43.075Z,1509670603.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:43.458Z,1509670603.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:43.474Z,1509670603.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:43.848Z,1509670603.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:43.863Z,1509670603.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:44.247Z,1509670604.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:44.267Z,1509670604.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:44.652Z,1509670604.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:44.675Z,1509670604.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:45.053Z,1509670605.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:45.067Z,1509670605.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:45.454Z,1509670605.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:45.469Z,1509670605.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:45.839Z,1509670605.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:45.854Z,1509670605.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:46.247Z,1509670606.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:46.262Z,1509670606.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:46.651Z,1509670606.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:46.667Z,1509670606.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:47.052Z,1509670607.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:47.068Z,1509670607.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:47.452Z,1509670607.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:47.475Z,1509670607.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:47.684Z,1509670607.684 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:56:47.685Z,1509670607.685 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T00:56:47.685Z,1509670607.685 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:56:47.852Z,1509670607.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:47.867Z,1509670607.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:56:47.868Z,1509670607.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:47.965Z,1509670607.965 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:56:48.088Z,1509670608.088 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:56:48.172Z,1509670608.172 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:56:48.243Z,1509670608.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:48.260Z,1509670608.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T00:56:48.261Z,1509670608.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:48.652Z,1509670608.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:48.674Z,1509670608.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:56:48.676Z,1509670608.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:49.052Z,1509670609.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:49.067Z,1509670609.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:56:49.069Z,1509670609.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:49.452Z,1509670609.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:49.467Z,1509670609.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T00:56:49.468Z,1509670609.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:49.572Z,1509670609.572 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:56:49.573Z,1509670609.573 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T00:56:49.788Z,1509670609.788 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:56:49.789Z,1509670609.789 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:56:49.789Z,1509670609.789 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:56:49.789Z,1509670609.789 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:56:49.851Z,1509670609.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:49.886Z,1509670609.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T00:56:49.887Z,1509670609.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:49.895Z,1509670609.895 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T00:56:49.895Z,1509670609.895 [Default:CheckIn:C.Wait] Stopped
2017-11-03T00:56:49.895Z,1509670609.895 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T00:56:49.895Z,1509670609.895 [Default:CheckIn:D] Running Loop=1
2017-11-03T00:56:50.247Z,1509670610.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:50.266Z,1509670610.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T00:56:50.267Z,1509670610.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:50.271Z,1509670610.271 [Default:CheckIn:D] Stopped
2017-11-03T00:56:50.271Z,1509670610.271 [Default:CheckIn:E] Running Loop=1
2017-11-03T00:56:50.656Z,1509670610.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:50.671Z,1509670610.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T00:56:50.673Z,1509670610.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:50.676Z,1509670610.676 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.711739 min 
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn:E] Stopped
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn] Stopped
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn](INFO): Running loop #5
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn] Running Loop=5
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T00:56:50.677Z,1509670610.677 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T00:56:51.061Z,1509670611.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:51.076Z,1509670611.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T00:56:51.077Z,1509670611.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:53.969Z,1509670613.969 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:56:54.079Z,1509670614.079 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:56:54.080Z,1509670614.080 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:56:54.081Z,1509670614.081 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:56:54.082Z,1509670614.082 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:56:54.443Z,1509670614.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:54.570Z,1509670614.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:54.688Z,1509670614.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:54.735Z,1509670614.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:55.098Z,1509670615.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:55.114Z,1509670615.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:55.502Z,1509670615.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:55.559Z,1509670615.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:55.906Z,1509670615.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:55.921Z,1509670615.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:55.921Z,1509670615.921 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2017-11-03T00:56:55.921Z,1509670615.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:56:55.923Z,1509670615.923 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:55.923Z,1509670615.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2017-11-03T00:56:55.923Z,1509670615.923 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:56:55.925Z,1509670615.925 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:55.926Z,1509670615.926 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-11-03T00:56:55.926Z,1509670615.926 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:56:55.997Z,1509670615.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:56:55.997Z,1509670615.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:56:55.997Z,1509670615.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:56:56.320Z,1509670616.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:56.451Z,1509670616.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:56:56.451Z,1509670616.451 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2017-11-03T00:56:56.452Z,1509670616.452 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:56:56.452Z,1509670616.452 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2017-11-03T00:56:56.453Z,1509670616.453 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:56:56.453Z,1509670616.453 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-11-03T00:56:56.709Z,1509670616.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:56.765Z,1509670616.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:56:56.765Z,1509670616.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:56:56.766Z,1509670616.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:56:56.766Z,1509670616.766 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:56:56.767Z,1509670616.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:56:56.767Z,1509670616.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:56:56.767Z,1509670616.767 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:56:56.768Z,1509670616.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:56:56.768Z,1509670616.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:56:57.087Z,1509670617.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:57.122Z,1509670617.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:57.491Z,1509670617.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:57.522Z,1509670617.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:57.891Z,1509670617.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:57.922Z,1509670617.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:58.289Z,1509670618.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:58.320Z,1509670618.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:58.701Z,1509670618.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:58.735Z,1509670618.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:59.113Z,1509670619.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:59.128Z,1509670619.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:59.497Z,1509670619.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:59.524Z,1509670619.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:56:59.888Z,1509670619.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:56:59.926Z,1509670619.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:00.291Z,1509670620.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:00.325Z,1509670620.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:00.688Z,1509670620.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:00.731Z,1509670620.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:01.136Z,1509670621.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:01.175Z,1509670621.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:01.487Z,1509670621.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:01.502Z,1509670621.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:01.901Z,1509670621.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:01.933Z,1509670621.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:02.309Z,1509670622.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:02.335Z,1509670622.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:02.701Z,1509670622.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:02.732Z,1509670622.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:03.088Z,1509670623.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:03.103Z,1509670623.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:03.488Z,1509670623.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:03.511Z,1509670623.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:03.895Z,1509670623.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:03.910Z,1509670623.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:04.293Z,1509670624.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:04.307Z,1509670624.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:04.701Z,1509670624.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:04.733Z,1509670624.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:05.101Z,1509670625.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:05.132Z,1509670625.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:05.505Z,1509670625.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:05.530Z,1509670625.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:05.888Z,1509670625.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:05.910Z,1509670625.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:06.292Z,1509670626.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:06.307Z,1509670626.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:06.691Z,1509670626.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:06.711Z,1509670626.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:07.092Z,1509670627.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:07.132Z,1509670627.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:07.494Z,1509670627.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:07.539Z,1509670627.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:07.900Z,1509670627.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:07.915Z,1509670627.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:08.313Z,1509670628.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:08.343Z,1509670628.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:08.702Z,1509670628.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:08.755Z,1509670628.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:09.091Z,1509670629.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:09.107Z,1509670629.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:09.494Z,1509670629.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:09.509Z,1509670629.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:09.895Z,1509670629.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:09.946Z,1509670629.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:10.299Z,1509670630.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:10.338Z,1509670630.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:10.705Z,1509670630.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:10.743Z,1509670630.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:11.101Z,1509670631.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:11.155Z,1509670631.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:11.505Z,1509670631.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:11.536Z,1509670631.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:11.892Z,1509670631.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:11.907Z,1509670631.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:12.299Z,1509670632.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:12.337Z,1509670632.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:12.692Z,1509670632.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:12.711Z,1509670632.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:13.092Z,1509670633.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:13.107Z,1509670633.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:13.491Z,1509670633.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:13.507Z,1509670633.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:13.905Z,1509670633.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:13.937Z,1509670633.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:14.309Z,1509670634.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:14.397Z,1509670634.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:14.704Z,1509670634.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:14.719Z,1509670634.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:15.089Z,1509670635.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:15.104Z,1509670635.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:15.498Z,1509670635.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:15.534Z,1509670635.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:15.892Z,1509670635.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:15.907Z,1509670635.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:16.296Z,1509670636.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:16.336Z,1509670636.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:16.714Z,1509670636.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:16.742Z,1509670636.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:17.099Z,1509670637.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:17.135Z,1509670637.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:17.506Z,1509670637.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:17.537Z,1509670637.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:17.893Z,1509670637.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:17.908Z,1509670637.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:18.292Z,1509670638.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:18.307Z,1509670638.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:18.702Z,1509670638.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:18.742Z,1509670638.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:19.092Z,1509670639.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:19.107Z,1509670639.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:19.492Z,1509670639.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:19.507Z,1509670639.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:19.909Z,1509670639.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:19.939Z,1509670639.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:20.317Z,1509670640.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:20.347Z,1509670640.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:20.706Z,1509670640.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:20.737Z,1509670640.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:21.096Z,1509670641.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:21.111Z,1509670641.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:21.496Z,1509670641.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:21.511Z,1509670641.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:21.897Z,1509670641.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:21.959Z,1509670641.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:22.294Z,1509670642.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:22.315Z,1509670642.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:22.709Z,1509670642.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:22.745Z,1509670642.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:23.101Z,1509670643.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:23.117Z,1509670643.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:23.509Z,1509670643.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:23.560Z,1509670643.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:23.896Z,1509670643.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:23.912Z,1509670643.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:24.296Z,1509670644.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:24.347Z,1509670644.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:24.697Z,1509670644.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:24.711Z,1509670644.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:25.097Z,1509670645.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:25.151Z,1509670645.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:25.496Z,1509670645.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:25.547Z,1509670645.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:25.910Z,1509670645.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:25.945Z,1509670645.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:26.302Z,1509670646.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:26.317Z,1509670646.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:26.710Z,1509670646.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:26.745Z,1509670646.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:27.096Z,1509670647.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:27.115Z,1509670647.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:27.496Z,1509670647.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:27.511Z,1509670647.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:27.897Z,1509670647.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:27.912Z,1509670647.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:28.295Z,1509670648.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:28.311Z,1509670648.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:28.702Z,1509670648.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:28.726Z,1509670648.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:29.103Z,1509670649.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:29.119Z,1509670649.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:29.504Z,1509670649.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:29.520Z,1509670649.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:29.888Z,1509670649.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:29.915Z,1509670649.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:30.287Z,1509670650.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:30.319Z,1509670650.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:30.721Z,1509670650.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:30.736Z,1509670650.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:31.090Z,1509670651.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:31.116Z,1509670651.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:31.491Z,1509670651.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:31.515Z,1509670651.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:31.898Z,1509670651.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:31.921Z,1509670651.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:32.309Z,1509670652.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:32.324Z,1509670652.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:32.722Z,1509670652.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:32.737Z,1509670652.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:33.088Z,1509670653.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:33.119Z,1509670653.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:33.487Z,1509670653.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:33.513Z,1509670653.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:33.902Z,1509670653.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:33.917Z,1509670653.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:34.282Z,1509670654.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:34.313Z,1509670654.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:34.710Z,1509670654.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:34.725Z,1509670654.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:35.109Z,1509670655.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:35.124Z,1509670655.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:35.508Z,1509670655.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:35.523Z,1509670655.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:35.888Z,1509670655.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:35.914Z,1509670655.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:36.287Z,1509670656.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:36.312Z,1509670656.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:36.682Z,1509670656.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:36.727Z,1509670656.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:37.089Z,1509670657.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:37.123Z,1509670657.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:37.490Z,1509670657.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:37.546Z,1509670657.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:37.893Z,1509670657.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:37.920Z,1509670657.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:38.309Z,1509670658.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:38.329Z,1509670658.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:38.709Z,1509670658.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:38.768Z,1509670658.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:39.090Z,1509670659.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:39.121Z,1509670659.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:39.487Z,1509670659.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:39.539Z,1509670659.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:39.891Z,1509670659.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:39.946Z,1509670659.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:40.299Z,1509670660.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:40.323Z,1509670660.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:40.710Z,1509670660.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:40.725Z,1509670660.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:41.112Z,1509670661.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:41.127Z,1509670661.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:41.509Z,1509670661.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:41.524Z,1509670661.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:41.888Z,1509670661.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:41.923Z,1509670661.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:42.291Z,1509670662.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:42.373Z,1509670662.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:42.690Z,1509670662.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:42.721Z,1509670662.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:43.089Z,1509670663.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:43.121Z,1509670663.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:43.488Z,1509670663.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:43.503Z,1509670663.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:43.901Z,1509670663.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:43.928Z,1509670663.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:44.305Z,1509670664.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:44.339Z,1509670664.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:44.733Z,1509670664.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:44.748Z,1509670664.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:45.084Z,1509670665.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:45.100Z,1509670665.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:45.488Z,1509670665.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:45.503Z,1509670665.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:45.890Z,1509670665.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:45.931Z,1509670665.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:46.287Z,1509670666.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:46.302Z,1509670666.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:46.734Z,1509670666.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:46.755Z,1509670666.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:47.110Z,1509670667.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:47.139Z,1509670667.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:47.502Z,1509670667.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:47.532Z,1509670667.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:47.889Z,1509670667.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:47.904Z,1509670667.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:48.291Z,1509670668.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:48.311Z,1509670668.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:48.695Z,1509670668.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:48.734Z,1509670668.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:49.088Z,1509670669.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:49.103Z,1509670669.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:49.488Z,1509670669.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:49.503Z,1509670669.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:49.900Z,1509670669.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:49.931Z,1509670669.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:50.309Z,1509670670.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:50.359Z,1509670670.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:50.706Z,1509670670.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:50.736Z,1509670670.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:51.090Z,1509670671.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:51.105Z,1509670671.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:54.401Z,1509670674.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:54.453Z,1509670674.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:54.613Z,1509670674.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:54.641Z,1509670674.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:55.022Z,1509670675.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:55.042Z,1509670675.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:55.423Z,1509670675.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:55.450Z,1509670675.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:55.822Z,1509670675.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:55.849Z,1509670675.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:56.209Z,1509670676.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:56.267Z,1509670676.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:56.612Z,1509670676.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:56.628Z,1509670676.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:57.010Z,1509670677.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:57.067Z,1509670677.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:57.409Z,1509670677.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:57.472Z,1509670677.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:57.826Z,1509670677.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:57.862Z,1509670677.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:58.226Z,1509670678.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:58.261Z,1509670678.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:58.657Z,1509670678.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:58.688Z,1509670678.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:59.015Z,1509670679.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:59.030Z,1509670679.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:59.411Z,1509670679.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:59.427Z,1509670679.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:57:59.814Z,1509670679.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:57:59.830Z,1509670679.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:00.213Z,1509670680.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:00.227Z,1509670680.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:00.654Z,1509670680.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:00.707Z,1509670680.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:01.021Z,1509670681.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:01.037Z,1509670681.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:01.429Z,1509670681.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:01.460Z,1509670681.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:01.822Z,1509670681.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:01.837Z,1509670681.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:02.214Z,1509670682.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:02.234Z,1509670682.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:02.616Z,1509670682.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:02.631Z,1509670682.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:03.011Z,1509670683.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:03.026Z,1509670683.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:03.415Z,1509670683.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:03.430Z,1509670683.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:03.821Z,1509670683.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:03.836Z,1509670683.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:04.222Z,1509670684.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:04.237Z,1509670684.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:04.622Z,1509670684.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:04.637Z,1509670684.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:05.016Z,1509670685.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:05.031Z,1509670685.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:05.418Z,1509670685.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:05.433Z,1509670685.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:05.816Z,1509670685.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:05.831Z,1509670685.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:06.220Z,1509670686.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:06.235Z,1509670686.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:06.618Z,1509670686.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:06.634Z,1509670686.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:07.021Z,1509670687.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:07.037Z,1509670687.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:07.425Z,1509670687.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:07.439Z,1509670687.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:07.822Z,1509670687.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:07.837Z,1509670687.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:08.225Z,1509670688.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:08.295Z,1509670688.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:08.616Z,1509670688.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:08.631Z,1509670688.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:09.019Z,1509670689.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:09.034Z,1509670689.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:09.414Z,1509670689.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:09.486Z,1509670689.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:09.824Z,1509670689.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:09.839Z,1509670689.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:10.223Z,1509670690.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:10.243Z,1509670690.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:10.623Z,1509670690.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:10.678Z,1509670690.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:11.019Z,1509670691.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:11.038Z,1509670691.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:11.412Z,1509670691.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:11.467Z,1509670691.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:11.815Z,1509670691.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:11.874Z,1509670691.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:12.220Z,1509670692.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:12.239Z,1509670692.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:12.631Z,1509670692.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:12.690Z,1509670692.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:13.023Z,1509670693.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:13.043Z,1509670693.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:13.424Z,1509670693.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:13.439Z,1509670693.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:13.828Z,1509670693.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:13.847Z,1509670693.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:14.216Z,1509670694.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:14.231Z,1509670694.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:14.604Z,1509670694.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:14.701Z,1509670694.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:15.019Z,1509670695.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:15.039Z,1509670695.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:15.415Z,1509670695.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:15.431Z,1509670695.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:15.828Z,1509670695.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:15.843Z,1509670695.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:16.227Z,1509670696.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:16.247Z,1509670696.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:16.627Z,1509670696.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:16.647Z,1509670696.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:17.016Z,1509670697.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:17.075Z,1509670697.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:17.418Z,1509670697.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:17.439Z,1509670697.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:17.816Z,1509670697.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:17.839Z,1509670697.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:18.207Z,1509670698.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:18.233Z,1509670698.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:18.618Z,1509670698.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:18.633Z,1509670698.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:19.025Z,1509670699.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:19.040Z,1509670699.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:19.425Z,1509670699.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:19.446Z,1509670699.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:19.825Z,1509670699.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:19.840Z,1509670699.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:20.222Z,1509670700.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:20.243Z,1509670700.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:20.617Z,1509670700.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:20.638Z,1509670700.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:21.018Z,1509670701.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:21.039Z,1509670701.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:21.416Z,1509670701.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:21.434Z,1509670701.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:21.829Z,1509670701.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:21.844Z,1509670701.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:22.254Z,1509670702.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:22.274Z,1509670702.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:22.630Z,1509670702.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:22.645Z,1509670702.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:23.016Z,1509670703.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:23.039Z,1509670703.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:23.419Z,1509670703.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:23.434Z,1509670703.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:23.816Z,1509670703.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:23.879Z,1509670703.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:24.222Z,1509670704.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:24.238Z,1509670704.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:24.611Z,1509670704.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:24.678Z,1509670704.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:25.029Z,1509670705.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:25.047Z,1509670705.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:25.433Z,1509670705.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:25.490Z,1509670705.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:25.829Z,1509670705.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:25.886Z,1509670705.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:26.209Z,1509670706.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:26.239Z,1509670706.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:26.611Z,1509670706.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:26.709Z,1509670706.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:27.012Z,1509670707.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:27.028Z,1509670707.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:27.415Z,1509670707.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:27.431Z,1509670707.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:27.826Z,1509670707.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:27.857Z,1509670707.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:28.221Z,1509670708.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:28.258Z,1509670708.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:28.634Z,1509670708.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:28.707Z,1509670708.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:29.014Z,1509670709.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:29.033Z,1509670709.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:29.412Z,1509670709.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:29.427Z,1509670709.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:29.816Z,1509670709.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:29.831Z,1509670709.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:30.215Z,1509670710.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:30.230Z,1509670710.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:30.616Z,1509670710.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:30.631Z,1509670710.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:31.021Z,1509670711.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:31.037Z,1509670711.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:31.421Z,1509670711.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:31.436Z,1509670711.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:31.818Z,1509670711.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:31.833Z,1509670711.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:32.217Z,1509670712.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:32.232Z,1509670712.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:32.615Z,1509670712.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:32.634Z,1509670712.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:33.017Z,1509670713.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:33.032Z,1509670713.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:33.417Z,1509670713.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:33.432Z,1509670713.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:33.830Z,1509670713.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:33.859Z,1509670713.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:34.222Z,1509670714.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:34.237Z,1509670714.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:34.622Z,1509670714.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:34.637Z,1509670714.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:35.016Z,1509670715.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:35.033Z,1509670715.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:35.415Z,1509670715.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:35.431Z,1509670715.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:35.812Z,1509670715.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:35.835Z,1509670715.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:36.235Z,1509670716.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:36.268Z,1509670716.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:36.616Z,1509670716.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:36.632Z,1509670716.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:37.029Z,1509670717.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:37.065Z,1509670717.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:37.419Z,1509670717.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:37.434Z,1509670717.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:37.830Z,1509670717.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:37.866Z,1509670717.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:38.216Z,1509670718.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:38.282Z,1509670718.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:38.614Z,1509670718.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:38.631Z,1509670718.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:39.012Z,1509670719.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:39.027Z,1509670719.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:39.420Z,1509670719.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:39.439Z,1509670719.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:39.820Z,1509670719.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:39.835Z,1509670719.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:40.219Z,1509670720.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:40.239Z,1509670720.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:40.631Z,1509670720.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:40.691Z,1509670720.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:41.012Z,1509670721.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:41.020Z,1509670721.020 [BPC1](ERROR): Failed to receive battery data
2017-11-03T00:58:41.020Z,1509670721.020 [BPC1] Communications Fault, FailCount= 1
2017-11-03T00:58:41.020Z,1509670721.020 [BPC1](ERROR): Communications Fault
2017-11-03T00:58:41.028Z,1509670721.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:41.105Z,1509670721.105 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T00:58:41.414Z,1509670721.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:41.429Z,1509670721.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:41.816Z,1509670721.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:41.830Z,1509670721.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:42.219Z,1509670722.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:42.234Z,1509670722.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:42.317Z,1509670722.317 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T00:58:42.317Z,1509670722.317 [BPC1] No Fault, FailCount= 1
2017-11-03T00:58:42.629Z,1509670722.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:42.774Z,1509670722.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:43.023Z,1509670723.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:43.043Z,1509670723.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:43.425Z,1509670723.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:43.439Z,1509670723.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:43.823Z,1509670723.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:43.843Z,1509670723.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:44.214Z,1509670724.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:44.267Z,1509670724.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:44.619Z,1509670724.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:44.639Z,1509670724.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:45.019Z,1509670725.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:45.034Z,1509670725.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:45.416Z,1509670725.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:45.431Z,1509670725.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:45.824Z,1509670725.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:45.839Z,1509670725.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:46.223Z,1509670726.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:46.243Z,1509670726.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:46.623Z,1509670726.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:46.643Z,1509670726.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:47.018Z,1509670727.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:47.033Z,1509670727.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:47.418Z,1509670727.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:47.439Z,1509670727.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:47.825Z,1509670727.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:47.840Z,1509670727.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:48.215Z,1509670728.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:48.235Z,1509670728.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:48.623Z,1509670728.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:48.643Z,1509670728.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:49.023Z,1509670729.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:49.043Z,1509670729.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:49.424Z,1509670729.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:49.439Z,1509670729.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:49.812Z,1509670729.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:49.835Z,1509670729.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:50.214Z,1509670730.214 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T00:58:50.214Z,1509670730.214 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T00:58:50.214Z,1509670730.214 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T00:58:50.235Z,1509670730.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:50.251Z,1509670730.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T00:58:50.276Z,1509670730.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:50.363Z,1509670730.363 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T00:58:50.616Z,1509670730.616 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T00:58:50.643Z,1509670730.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:50.718Z,1509670730.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T00:58:50.719Z,1509670730.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:50.779Z,1509670730.779 [Rowe_600LCM](INFO): Powering down
2017-11-03T00:58:51.027Z,1509670731.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:51.043Z,1509670731.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T00:58:51.044Z,1509670731.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:51.428Z,1509670731.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:51.451Z,1509670731.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T00:58:51.452Z,1509670731.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:54.538Z,1509670734.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:54.553Z,1509670734.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T00:58:54.554Z,1509670734.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:54.665Z,1509670734.665 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T00:58:54.665Z,1509670734.665 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T00:58:54.710Z,1509670734.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:54.746Z,1509670734.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T00:58:54.747Z,1509670734.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:54.821Z,1509670734.821 [Rowe_600LCM](INFO): Initializing
2017-11-03T00:58:54.821Z,1509670734.821 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T00:58:54.821Z,1509670734.821 [Rowe_600LCM](INFO): LCM OK
2017-11-03T00:58:54.821Z,1509670734.821 [Rowe_600LCM](INFO): Powering up
2017-11-03T00:58:55.106Z,1509670735.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:55.155Z,1509670735.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T00:58:55.156Z,1509670735.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:55.506Z,1509670735.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:55.521Z,1509670735.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T00:58:55.522Z,1509670735.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:55.900Z,1509670735.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:55.915Z,1509670735.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T00:58:55.917Z,1509670735.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:56.307Z,1509670736.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:56.326Z,1509670736.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T00:58:56.327Z,1509670736.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:56.713Z,1509670736.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:56.766Z,1509670736.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T00:58:56.767Z,1509670736.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:57.113Z,1509670737.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:57.147Z,1509670737.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T00:58:57.148Z,1509670737.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:57.517Z,1509670737.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:57.562Z,1509670737.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T00:58:57.563Z,1509670737.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:57.899Z,1509670737.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:57.913Z,1509670737.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T00:58:57.914Z,1509670737.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:58.299Z,1509670738.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:58.354Z,1509670738.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T00:58:58.355Z,1509670738.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:58.703Z,1509670738.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:58.718Z,1509670738.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T00:58:58.719Z,1509670738.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:58.944Z,1509670738.944 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T00:58:59.003Z,1509670739.003 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T00:58:59.004Z,1509670739.004 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T00:58:59.005Z,1509670739.005 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T00:58:59.006Z,1509670739.006 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T00:58:59.118Z,1509670739.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:59.175Z,1509670739.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T00:58:59.176Z,1509670739.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:59.503Z,1509670739.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:59.519Z,1509670739.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:58:59.917Z,1509670739.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:58:59.948Z,1509670739.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:00.321Z,1509670740.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:00.346Z,1509670740.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:00.718Z,1509670740.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:00.749Z,1509670740.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:01.107Z,1509670741.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:01.127Z,1509670741.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:01.499Z,1509670741.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:01.514Z,1509670741.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:01.904Z,1509670741.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:01.919Z,1509670741.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:02.303Z,1509670742.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:02.319Z,1509670742.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:02.712Z,1509670742.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:02.727Z,1509670742.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:03.113Z,1509670743.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:03.147Z,1509670743.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:03.513Z,1509670743.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:03.545Z,1509670743.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:03.903Z,1509670743.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:03.918Z,1509670743.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:04.304Z,1509670744.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:04.319Z,1509670744.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:04.703Z,1509670744.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:04.719Z,1509670744.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:05.104Z,1509670745.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:05.123Z,1509670745.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:05.505Z,1509670745.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:05.521Z,1509670745.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:05.950Z,1509670745.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:06.025Z,1509670746.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:06.321Z,1509670746.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:06.350Z,1509670746.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:06.714Z,1509670746.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:06.729Z,1509670746.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:07.107Z,1509670747.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:07.122Z,1509670747.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:07.505Z,1509670747.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:07.520Z,1509670747.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:07.908Z,1509670747.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:07.923Z,1509670747.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:08.307Z,1509670748.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:08.322Z,1509670748.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:08.721Z,1509670748.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:08.750Z,1509670748.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:09.158Z,1509670749.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:09.223Z,1509670749.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:09.512Z,1509670749.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:09.527Z,1509670749.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:09.910Z,1509670749.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:09.930Z,1509670749.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:10.307Z,1509670750.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:10.362Z,1509670750.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:10.708Z,1509670750.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:10.723Z,1509670750.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:11.154Z,1509670751.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:11.218Z,1509670751.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:11.508Z,1509670751.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:11.523Z,1509670751.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:11.915Z,1509670751.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:11.966Z,1509670751.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:12.316Z,1509670752.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:12.331Z,1509670752.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:12.716Z,1509670752.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:12.766Z,1509670752.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:13.138Z,1509670753.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:13.171Z,1509670753.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:13.507Z,1509670753.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:13.522Z,1509670753.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:13.912Z,1509670753.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:13.927Z,1509670753.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:14.306Z,1509670754.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:14.322Z,1509670754.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:14.717Z,1509670754.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:14.731Z,1509670754.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:15.156Z,1509670755.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:15.175Z,1509670755.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:15.520Z,1509670755.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:15.543Z,1509670755.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:15.910Z,1509670755.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:15.926Z,1509670755.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:16.310Z,1509670756.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:16.327Z,1509670756.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:16.707Z,1509670756.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:16.723Z,1509670756.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:17.107Z,1509670757.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:17.121Z,1509670757.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:17.499Z,1509670757.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:17.530Z,1509670757.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:17.920Z,1509670757.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:17.935Z,1509670757.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:18.324Z,1509670758.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:18.339Z,1509670758.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:18.720Z,1509670758.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:18.735Z,1509670758.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:19.111Z,1509670759.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:19.126Z,1509670759.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:19.499Z,1509670759.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:19.533Z,1509670759.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:19.912Z,1509670759.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:19.927Z,1509670759.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:20.311Z,1509670760.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:20.331Z,1509670760.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:20.724Z,1509670760.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:20.739Z,1509670760.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:21.122Z,1509670761.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:21.137Z,1509670761.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:21.522Z,1509670761.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:21.537Z,1509670761.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:21.899Z,1509670761.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:21.926Z,1509670761.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:22.309Z,1509670762.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:22.324Z,1509670762.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:22.710Z,1509670762.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:22.731Z,1509670762.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:23.100Z,1509670763.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:23.125Z,1509670763.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:23.511Z,1509670763.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:23.571Z,1509670763.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:23.917Z,1509670763.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:23.933Z,1509670763.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:24.325Z,1509670764.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:24.339Z,1509670764.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:24.721Z,1509670764.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:24.736Z,1509670764.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:25.138Z,1509670765.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:25.213Z,1509670765.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:25.496Z,1509670765.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:25.511Z,1509670765.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:25.901Z,1509670765.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:25.947Z,1509670765.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:26.300Z,1509670766.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:26.327Z,1509670766.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:26.713Z,1509670766.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:26.763Z,1509670766.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:27.171Z,1509670767.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:27.242Z,1509670767.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:27.513Z,1509670767.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:27.539Z,1509670767.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:27.900Z,1509670767.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:27.939Z,1509670767.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:28.302Z,1509670768.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:28.337Z,1509670768.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:28.700Z,1509670768.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:28.715Z,1509670768.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:29.154Z,1509670769.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:29.187Z,1509670769.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:29.507Z,1509670769.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:29.539Z,1509670769.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:29.917Z,1509670769.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:29.947Z,1509670769.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:30.313Z,1509670770.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:30.339Z,1509670770.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:30.713Z,1509670770.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:30.737Z,1509670770.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:31.106Z,1509670771.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:31.197Z,1509670771.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:31.499Z,1509670771.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:31.513Z,1509670771.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:31.900Z,1509670771.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:31.915Z,1509670771.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:32.302Z,1509670772.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:32.339Z,1509670772.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:32.713Z,1509670772.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:32.738Z,1509670772.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:33.113Z,1509670773.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:33.143Z,1509670773.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:33.527Z,1509670773.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:33.542Z,1509670773.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:33.903Z,1509670773.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:33.917Z,1509670773.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:34.299Z,1509670774.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:34.315Z,1509670774.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:34.707Z,1509670774.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:34.739Z,1509670774.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:35.100Z,1509670775.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:35.118Z,1509670775.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:35.499Z,1509670775.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:35.514Z,1509670775.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:35.910Z,1509670775.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:35.941Z,1509670775.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:36.313Z,1509670776.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:36.343Z,1509670776.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:36.714Z,1509670776.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:36.744Z,1509670776.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:37.101Z,1509670777.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:37.115Z,1509670777.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:37.499Z,1509670777.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:37.514Z,1509670777.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:37.915Z,1509670777.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:37.971Z,1509670777.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:38.299Z,1509670778.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:38.314Z,1509670778.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:38.713Z,1509670778.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:38.743Z,1509670778.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:39.156Z,1509670779.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:39.207Z,1509670779.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:39.517Z,1509670779.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:39.548Z,1509670779.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:39.903Z,1509670779.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:39.947Z,1509670779.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:40.307Z,1509670780.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:40.327Z,1509670780.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:40.703Z,1509670780.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:40.758Z,1509670780.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:41.167Z,1509670781.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:41.246Z,1509670781.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:41.507Z,1509670781.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:41.527Z,1509670781.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:41.917Z,1509670781.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:41.949Z,1509670781.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:42.321Z,1509670782.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:42.347Z,1509670782.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:42.714Z,1509670782.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:42.749Z,1509670782.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:43.151Z,1509670783.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:43.174Z,1509670783.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:43.503Z,1509670783.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:43.518Z,1509670783.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:43.904Z,1509670783.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:43.919Z,1509670783.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:44.303Z,1509670784.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:44.318Z,1509670784.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:44.721Z,1509670784.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:44.745Z,1509670784.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:45.109Z,1509670785.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:45.124Z,1509670785.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:45.509Z,1509670785.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:45.525Z,1509670785.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:45.907Z,1509670785.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:45.922Z,1509670785.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:46.302Z,1509670786.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:46.317Z,1509670786.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:46.707Z,1509670786.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:46.722Z,1509670786.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:47.105Z,1509670787.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:47.119Z,1509670787.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:47.503Z,1509670787.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:47.523Z,1509670787.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:47.912Z,1509670787.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:47.927Z,1509670787.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:48.316Z,1509670788.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:48.338Z,1509670788.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:48.714Z,1509670788.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:48.729Z,1509670788.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:49.108Z,1509670789.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:49.123Z,1509670789.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:49.507Z,1509670789.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:49.522Z,1509670789.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:49.907Z,1509670789.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:49.922Z,1509670789.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:50.308Z,1509670790.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:50.323Z,1509670790.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:50.713Z,1509670790.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:50.728Z,1509670790.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:51.113Z,1509670791.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:51.128Z,1509670791.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:51.518Z,1509670791.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:51.533Z,1509670791.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:54.701Z,1509670794.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:54.775Z,1509670794.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:54.890Z,1509670794.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:54.920Z,1509670794.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:55.304Z,1509670795.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:55.320Z,1509670795.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:55.713Z,1509670795.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:55.770Z,1509670795.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:56.109Z,1509670796.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:56.124Z,1509670796.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:56.488Z,1509670796.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:56.559Z,1509670796.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:56.889Z,1509670796.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:56.939Z,1509670796.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:56.939Z,1509670796.939 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2017-11-03T00:59:56.940Z,1509670796.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T00:59:56.941Z,1509670796.941 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:56.941Z,1509670796.941 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2017-11-03T00:59:56.942Z,1509670796.942 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T00:59:56.943Z,1509670796.943 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:56.943Z,1509670796.943 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-11-03T00:59:56.943Z,1509670796.943 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T00:59:57.053Z,1509670797.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T00:59:57.053Z,1509670797.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T00:59:57.054Z,1509670797.054 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T00:59:57.287Z,1509670797.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:57.408Z,1509670797.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T00:59:57.409Z,1509670797.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2017-11-03T00:59:57.409Z,1509670797.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T00:59:57.409Z,1509670797.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2017-11-03T00:59:57.410Z,1509670797.410 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T00:59:57.410Z,1509670797.410 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-11-03T00:59:57.709Z,1509670797.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:57.723Z,1509670797.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T00:59:57.724Z,1509670797.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:59:57.724Z,1509670797.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:59:57.725Z,1509670797.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T00:59:57.725Z,1509670797.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:59:57.726Z,1509670797.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:59:57.726Z,1509670797.726 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T00:59:57.726Z,1509670797.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T00:59:57.727Z,1509670797.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T00:59:58.117Z,1509670798.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:58.138Z,1509670798.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:58.497Z,1509670798.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:58.548Z,1509670798.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:58.888Z,1509670798.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:58.920Z,1509670798.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:59.291Z,1509670799.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:59.327Z,1509670799.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T00:59:59.687Z,1509670799.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T00:59:59.727Z,1509670799.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:00.087Z,1509670800.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:00.102Z,1509670800.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:00.488Z,1509670800.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:00.502Z,1509670800.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:00.897Z,1509670800.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:00.933Z,1509670800.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:01.301Z,1509670801.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:01.387Z,1509670801.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:01.705Z,1509670801.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:01.720Z,1509670801.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:02.093Z,1509670802.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:02.108Z,1509670802.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:02.495Z,1509670802.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:02.511Z,1509670802.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:02.894Z,1509670802.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:02.909Z,1509670802.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:03.293Z,1509670803.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:03.319Z,1509670803.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:03.710Z,1509670803.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:03.734Z,1509670803.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:04.109Z,1509670804.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:04.130Z,1509670804.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:04.552Z,1509670804.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:04.568Z,1509670804.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:04.896Z,1509670804.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:04.919Z,1509670804.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:05.287Z,1509670805.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:05.312Z,1509670805.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:05.710Z,1509670805.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:05.735Z,1509670805.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:06.097Z,1509670806.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:06.112Z,1509670806.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:06.497Z,1509670806.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:06.512Z,1509670806.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:06.905Z,1509670806.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:06.921Z,1509670806.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:07.307Z,1509670807.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:07.374Z,1509670807.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:07.710Z,1509670807.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:07.726Z,1509670807.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:08.091Z,1509670808.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:08.117Z,1509670808.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:08.489Z,1509670808.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:08.519Z,1509670808.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:08.892Z,1509670808.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:08.918Z,1509670808.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:09.287Z,1509670809.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:09.339Z,1509670809.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:09.713Z,1509670809.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:09.735Z,1509670809.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:10.106Z,1509670810.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:10.143Z,1509670810.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:10.510Z,1509670810.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:10.525Z,1509670810.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:10.889Z,1509670810.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:10.947Z,1509670810.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:11.287Z,1509670811.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:11.339Z,1509670811.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:11.684Z,1509670811.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:11.718Z,1509670811.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:12.089Z,1509670812.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:12.116Z,1509670812.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:12.491Z,1509670812.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:12.516Z,1509670812.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:12.909Z,1509670812.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:12.925Z,1509670812.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:13.320Z,1509670813.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:13.343Z,1509670813.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:13.709Z,1509670813.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:13.730Z,1509670813.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:14.086Z,1509670814.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:14.113Z,1509670814.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:14.488Z,1509670814.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:14.523Z,1509670814.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:14.891Z,1509670814.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:14.922Z,1509670814.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:15.291Z,1509670815.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:15.321Z,1509670815.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:15.709Z,1509670815.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:15.725Z,1509670815.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:16.097Z,1509670816.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:16.123Z,1509670816.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:16.498Z,1509670816.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:16.531Z,1509670816.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:16.889Z,1509670816.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:16.925Z,1509670816.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:17.287Z,1509670817.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:17.301Z,1509670817.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:17.718Z,1509670817.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:17.743Z,1509670817.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:18.090Z,1509670818.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:18.127Z,1509670818.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:18.489Z,1509670818.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:18.504Z,1509670818.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:18.907Z,1509670818.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:18.943Z,1509670818.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:19.302Z,1509670819.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:19.329Z,1509670819.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:19.735Z,1509670819.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:19.750Z,1509670819.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:20.089Z,1509670820.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:20.105Z,1509670820.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:20.490Z,1509670820.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:20.524Z,1509670820.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:20.891Z,1509670820.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:20.907Z,1509670820.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:21.299Z,1509670821.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:21.341Z,1509670821.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:21.705Z,1509670821.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:21.774Z,1509670821.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:22.104Z,1509670822.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:22.140Z,1509670822.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:22.502Z,1509670822.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:22.538Z,1509670822.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:22.892Z,1509670822.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:22.908Z,1509670822.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:23.299Z,1509670823.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:23.358Z,1509670823.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:23.693Z,1509670823.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:23.715Z,1509670823.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:24.092Z,1509670824.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:24.107Z,1509670824.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:24.494Z,1509670824.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:24.552Z,1509670824.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:24.902Z,1509670824.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:24.935Z,1509670824.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:25.309Z,1509670825.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:25.377Z,1509670825.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:25.704Z,1509670825.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:25.747Z,1509670825.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:26.087Z,1509670826.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:26.103Z,1509670826.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:26.487Z,1509670826.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:26.502Z,1509670826.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:26.894Z,1509670826.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:26.909Z,1509670826.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:27.296Z,1509670827.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:27.315Z,1509670827.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:27.705Z,1509670827.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:27.737Z,1509670827.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:28.101Z,1509670828.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:28.115Z,1509670828.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:28.502Z,1509670828.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:28.529Z,1509670828.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:28.891Z,1509670828.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:28.905Z,1509670828.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:29.296Z,1509670829.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:29.315Z,1509670829.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:29.698Z,1509670829.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:29.713Z,1509670829.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:30.096Z,1509670830.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:30.110Z,1509670830.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:30.499Z,1509670830.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:30.513Z,1509670830.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:30.904Z,1509670830.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:30.923Z,1509670830.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:31.303Z,1509670831.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:31.323Z,1509670831.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:31.721Z,1509670831.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:31.756Z,1509670831.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:32.099Z,1509670832.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:32.115Z,1509670832.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:32.496Z,1509670832.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:32.511Z,1509670832.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:32.901Z,1509670832.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:32.917Z,1509670832.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:33.298Z,1509670833.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:33.319Z,1509670833.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:33.719Z,1509670833.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:33.750Z,1509670833.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:34.109Z,1509670834.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:34.130Z,1509670834.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:34.508Z,1509670834.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:34.524Z,1509670834.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:34.897Z,1509670834.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:34.912Z,1509670834.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:35.295Z,1509670835.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:35.314Z,1509670835.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:35.696Z,1509670835.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:35.711Z,1509670835.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:36.096Z,1509670836.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:36.110Z,1509670836.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:36.496Z,1509670836.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:36.511Z,1509670836.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:36.908Z,1509670836.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:36.973Z,1509670836.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:37.308Z,1509670837.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:37.323Z,1509670837.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:37.708Z,1509670837.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:37.771Z,1509670837.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:38.086Z,1509670838.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:38.113Z,1509670838.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:38.490Z,1509670838.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:38.515Z,1509670838.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:38.885Z,1509670838.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:38.939Z,1509670838.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:39.287Z,1509670839.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:39.311Z,1509670839.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:39.709Z,1509670839.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:39.755Z,1509670839.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:40.110Z,1509670840.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:40.155Z,1509670840.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:40.509Z,1509670840.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:40.524Z,1509670840.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:40.890Z,1509670840.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:40.915Z,1509670840.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:41.287Z,1509670841.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:41.313Z,1509670841.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:41.689Z,1509670841.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:41.714Z,1509670841.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:42.088Z,1509670842.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:42.113Z,1509670842.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:42.488Z,1509670842.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:42.519Z,1509670842.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:42.905Z,1509670842.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:42.923Z,1509670842.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:43.309Z,1509670843.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:43.359Z,1509670843.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:43.709Z,1509670843.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:43.730Z,1509670843.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:44.085Z,1509670844.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:44.112Z,1509670844.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:44.488Z,1509670844.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:44.523Z,1509670844.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:44.888Z,1509670844.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:44.920Z,1509670844.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:45.285Z,1509670845.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:45.300Z,1509670845.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:45.730Z,1509670845.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:45.744Z,1509670845.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:46.102Z,1509670846.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:46.135Z,1509670846.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:46.502Z,1509670846.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:46.535Z,1509670846.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:46.890Z,1509670846.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:46.921Z,1509670846.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:47.291Z,1509670847.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:47.327Z,1509670847.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:47.701Z,1509670847.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:47.736Z,1509670847.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:48.091Z,1509670848.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:48.127Z,1509670848.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:48.487Z,1509670848.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:48.503Z,1509670848.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:48.902Z,1509670848.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:48.930Z,1509670848.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:49.301Z,1509670849.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:49.323Z,1509670849.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:49.702Z,1509670849.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:49.729Z,1509670849.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:50.088Z,1509670850.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:50.104Z,1509670850.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:50.488Z,1509670850.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:50.503Z,1509670850.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:50.896Z,1509670850.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:50.931Z,1509670850.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:51.297Z,1509670851.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:51.347Z,1509670851.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:51.706Z,1509670851.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:51.737Z,1509670851.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:54.927Z,1509670854.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:54.959Z,1509670854.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:55.114Z,1509670855.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:55.201Z,1509670855.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:55.496Z,1509670855.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:55.511Z,1509670855.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:55.904Z,1509670855.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:55.959Z,1509670855.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:56.296Z,1509670856.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:56.319Z,1509670856.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:56.709Z,1509670856.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:56.751Z,1509670856.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:57.109Z,1509670857.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:57.154Z,1509670857.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:57.513Z,1509670857.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:57.537Z,1509670857.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:57.899Z,1509670857.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:57.919Z,1509670857.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:58.295Z,1509670858.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:58.310Z,1509670858.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:58.697Z,1509670858.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:58.712Z,1509670858.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:59.100Z,1509670859.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:59.115Z,1509670859.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:59.499Z,1509670859.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:59.514Z,1509670859.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:00:59.902Z,1509670859.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:00:59.917Z,1509670859.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:00.305Z,1509670860.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:00.321Z,1509670860.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:00.705Z,1509670860.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:00.720Z,1509670860.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:01.099Z,1509670861.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:01.115Z,1509670861.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:01.499Z,1509670861.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:01.513Z,1509670861.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:01.904Z,1509670861.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:01.923Z,1509670861.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:02.300Z,1509670862.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:02.315Z,1509670862.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:02.713Z,1509670862.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:02.742Z,1509670862.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:03.154Z,1509670863.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:03.199Z,1509670863.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:03.502Z,1509670863.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:03.523Z,1509670863.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:03.899Z,1509670863.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:03.914Z,1509670863.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:04.300Z,1509670864.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:04.315Z,1509670864.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:04.700Z,1509670864.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:04.715Z,1509670864.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:05.144Z,1509670865.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:05.200Z,1509670865.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:05.500Z,1509670865.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:05.515Z,1509670865.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:05.914Z,1509670865.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:05.942Z,1509670865.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:06.305Z,1509670866.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:06.342Z,1509670866.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:06.702Z,1509670866.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:06.723Z,1509670866.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:07.128Z,1509670867.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:07.183Z,1509670867.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:07.493Z,1509670867.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:07.513Z,1509670867.513 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:01:07.514Z,1509670867.514 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:01:07.514Z,1509670867.514 [BPC1](ERROR): Data Fault
2017-11-03T01:01:07.522Z,1509670867.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:07.605Z,1509670867.605 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:01:07.893Z,1509670867.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:07.920Z,1509670867.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:08.295Z,1509670868.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:08.322Z,1509670868.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:08.713Z,1509670868.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:08.728Z,1509670868.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:08.820Z,1509670868.820 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:01:08.820Z,1509670868.820 [BPC1] No Fault, FailCount= 1
2017-11-03T01:01:09.117Z,1509670869.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:09.258Z,1509670869.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:09.513Z,1509670869.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:09.528Z,1509670869.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:09.893Z,1509670869.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:09.958Z,1509670869.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:10.288Z,1509670870.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:10.338Z,1509670870.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:10.686Z,1509670870.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:10.721Z,1509670870.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:11.093Z,1509670871.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:11.117Z,1509670871.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:11.491Z,1509670871.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:11.517Z,1509670871.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:11.909Z,1509670871.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:11.924Z,1509670871.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:12.308Z,1509670872.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:12.322Z,1509670872.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:12.713Z,1509670872.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:12.729Z,1509670872.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:13.093Z,1509670873.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:13.122Z,1509670873.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:13.492Z,1509670873.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:13.522Z,1509670873.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:13.684Z,1509670873.684 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:01:13.684Z,1509670873.684 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T01:01:13.684Z,1509670873.684 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:01:13.892Z,1509670873.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:13.919Z,1509670873.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:01:13.920Z,1509670873.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:14.009Z,1509670874.009 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:01:14.089Z,1509670874.089 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:01:14.178Z,1509670874.178 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:01:14.292Z,1509670874.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:14.323Z,1509670874.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:01:14.325Z,1509670874.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:14.713Z,1509670874.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:14.728Z,1509670874.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:01:14.729Z,1509670874.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:15.114Z,1509670875.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:15.130Z,1509670875.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:01:15.130Z,1509670875.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:15.513Z,1509670875.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:15.528Z,1509670875.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:01:15.529Z,1509670875.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:15.617Z,1509670875.617 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:01:15.617Z,1509670875.617 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T01:01:15.793Z,1509670875.793 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:01:15.794Z,1509670875.794 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:01:15.794Z,1509670875.794 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:01:15.794Z,1509670875.794 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:01:15.892Z,1509670875.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:15.921Z,1509670875.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:01:15.922Z,1509670875.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:16.293Z,1509670876.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:16.320Z,1509670876.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:01:16.321Z,1509670876.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:16.690Z,1509670876.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:16.721Z,1509670876.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:01:16.722Z,1509670876.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:17.096Z,1509670877.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:17.125Z,1509670877.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:01:17.126Z,1509670877.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:17.496Z,1509670877.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:17.526Z,1509670877.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:01:17.527Z,1509670877.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:17.914Z,1509670877.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:17.929Z,1509670877.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:01:17.930Z,1509670877.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:18.315Z,1509670878.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:18.334Z,1509670878.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:01:18.335Z,1509670878.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:18.715Z,1509670878.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:18.730Z,1509670878.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:01:18.731Z,1509670878.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:19.093Z,1509670879.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:19.120Z,1509670879.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:01:19.125Z,1509670879.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:19.489Z,1509670879.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:19.503Z,1509670879.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:01:19.505Z,1509670879.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:19.906Z,1509670879.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:19.942Z,1509670879.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:01:19.943Z,1509670879.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:20.039Z,1509670880.039 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:01:20.120Z,1509670880.120 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:01:20.121Z,1509670880.121 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:01:20.122Z,1509670880.122 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:01:20.123Z,1509670880.123 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:01:20.334Z,1509670880.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:20.351Z,1509670880.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:01:20.352Z,1509670880.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:20.706Z,1509670880.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:20.734Z,1509670880.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:21.110Z,1509670881.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:21.138Z,1509670881.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:21.506Z,1509670881.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:21.533Z,1509670881.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:21.895Z,1509670881.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:21.974Z,1509670881.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:22.301Z,1509670882.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:22.323Z,1509670882.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:22.702Z,1509670882.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:22.723Z,1509670882.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:23.101Z,1509670883.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:23.148Z,1509670883.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:23.500Z,1509670883.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:23.515Z,1509670883.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:23.908Z,1509670883.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:23.958Z,1509670883.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:24.307Z,1509670884.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:24.358Z,1509670884.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:24.708Z,1509670884.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:24.725Z,1509670884.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:25.102Z,1509670885.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:25.123Z,1509670885.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:25.502Z,1509670885.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:25.523Z,1509670885.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:25.904Z,1509670885.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:25.918Z,1509670885.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:26.300Z,1509670886.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:26.315Z,1509670886.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:26.723Z,1509670886.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:26.748Z,1509670886.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:27.113Z,1509670887.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:27.134Z,1509670887.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:27.512Z,1509670887.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:27.534Z,1509670887.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:27.902Z,1509670887.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:27.917Z,1509670887.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:28.286Z,1509670888.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:28.319Z,1509670888.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:28.697Z,1509670888.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:28.717Z,1509670888.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:29.101Z,1509670889.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:29.116Z,1509670889.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:29.488Z,1509670889.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:29.513Z,1509670889.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:29.912Z,1509670889.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:29.934Z,1509670889.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:30.312Z,1509670890.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:30.331Z,1509670890.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:30.712Z,1509670890.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:30.727Z,1509670890.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:31.100Z,1509670891.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:31.115Z,1509670891.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:31.502Z,1509670891.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:31.523Z,1509670891.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:31.887Z,1509670891.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:31.917Z,1509670891.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:32.310Z,1509670892.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:32.325Z,1509670892.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:32.712Z,1509670892.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:32.727Z,1509670892.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:33.112Z,1509670893.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:33.134Z,1509670893.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:33.512Z,1509670893.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:33.527Z,1509670893.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:33.902Z,1509670893.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:33.923Z,1509670893.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:34.310Z,1509670894.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:34.325Z,1509670894.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:34.699Z,1509670894.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:34.715Z,1509670894.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:35.101Z,1509670895.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:35.116Z,1509670895.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:35.503Z,1509670895.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:35.517Z,1509670895.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:35.912Z,1509670895.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:35.974Z,1509670895.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:36.317Z,1509670896.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:36.378Z,1509670896.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:36.713Z,1509670896.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:36.728Z,1509670896.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:37.101Z,1509670897.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:37.159Z,1509670897.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:37.502Z,1509670897.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:37.523Z,1509670897.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:37.889Z,1509670897.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:37.939Z,1509670897.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:38.291Z,1509670898.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:38.358Z,1509670898.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:38.712Z,1509670898.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:38.727Z,1509670898.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:38.809Z,1509670898.809 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T01:01:39.109Z,1509670899.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:39.123Z,1509670899.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:39.512Z,1509670899.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:39.527Z,1509670899.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:39.900Z,1509670899.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:39.916Z,1509670899.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:40.302Z,1509670900.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:40.317Z,1509670900.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:40.695Z,1509670900.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:40.725Z,1509670900.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:41.091Z,1509670901.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:41.119Z,1509670901.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:41.488Z,1509670901.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:41.503Z,1509670901.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:41.902Z,1509670901.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:41.927Z,1509670901.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:42.305Z,1509670902.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:42.335Z,1509670902.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:42.727Z,1509670902.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:42.741Z,1509670902.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:43.093Z,1509670903.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:43.124Z,1509670903.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:43.492Z,1509670903.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:43.507Z,1509670903.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:43.896Z,1509670903.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:43.911Z,1509670903.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:44.293Z,1509670904.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:44.308Z,1509670904.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:44.734Z,1509670904.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:44.749Z,1509670904.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:45.105Z,1509670905.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:45.133Z,1509670905.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:45.506Z,1509670905.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:45.531Z,1509670905.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:45.894Z,1509670905.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:45.936Z,1509670905.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:46.296Z,1509670906.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:46.330Z,1509670906.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:46.692Z,1509670906.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:46.709Z,1509670906.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:47.093Z,1509670907.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:47.109Z,1509670907.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:47.491Z,1509670907.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:47.507Z,1509670907.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:47.906Z,1509670907.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:47.935Z,1509670907.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:48.305Z,1509670908.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:48.327Z,1509670908.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:48.705Z,1509670908.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:48.731Z,1509670908.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:49.092Z,1509670909.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:49.107Z,1509670909.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:49.499Z,1509670909.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:49.531Z,1509670909.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:49.892Z,1509670909.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:49.907Z,1509670909.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:50.307Z,1509670910.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:50.355Z,1509670910.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:50.710Z,1509670910.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:50.759Z,1509670910.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:50.762Z,1509670910.762 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T00:56:50.7Z
2017-11-03T01:01:50.762Z,1509670910.762 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T01:01:50.762Z,1509670910.762 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T01:01:51.105Z,1509670911.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:51.136Z,1509670911.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:51.610Z,1509670911.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:51.668Z,1509670911.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:51.899Z,1509670911.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:51.914Z,1509670911.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:55.091Z,1509670915.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:55.139Z,1509670915.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:55.258Z,1509670915.258 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171103T001125/Courier0020.lzma
2017-11-03T01:01:55.294Z,1509670915.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:55.334Z,1509670915.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:55.687Z,1509670915.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:55.737Z,1509670915.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:56.047Z,1509670916.047 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0020.lzma.bak
2017-11-03T01:01:56.047Z,1509670916.047 [DataOverHttps](INFO): SBD MOMSN=5182331
2017-11-03T01:01:56.095Z,1509670916.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:56.110Z,1509670916.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:56.758Z,1509670916.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:56.780Z,1509670916.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:01:56.907Z,1509670916.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:01:56.942Z,1509670916.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:00.176Z,1509670920.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:00.191Z,1509670920.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:00.312Z,1509670920.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:00.359Z,1509670920.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:00.735Z,1509670920.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:00.755Z,1509670920.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:01.134Z,1509670921.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:01.150Z,1509670921.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:01.526Z,1509670921.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:01.548Z,1509670921.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:01.915Z,1509670921.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:01.948Z,1509670921.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:05.128Z,1509670925.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:05.151Z,1509670925.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:05.273Z,1509670925.273 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20171103T001125/Express0021.lzma
2017-11-03T01:02:05.310Z,1509670925.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:05.326Z,1509670925.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:05.706Z,1509670925.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:05.722Z,1509670925.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:06.071Z,1509670926.071 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0021.lzma.bak
2017-11-03T01:02:06.071Z,1509670926.071 [DataOverHttps](INFO): SBD MOMSN=5182335
2017-11-03T01:02:06.122Z,1509670926.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:06.205Z,1509670926.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:06.710Z,1509670926.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:06.725Z,1509670926.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:06.729Z,1509670926.729 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T01:02:06.729Z,1509670926.729 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T01:02:06.729Z,1509670926.729 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T01:02:06.895Z,1509670926.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:06.931Z,1509670926.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:10.109Z,1509670930.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:10.179Z,1509670930.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:10.299Z,1509670930.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:10.347Z,1509670930.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:10.733Z,1509670930.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:10.769Z,1509670930.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:11.120Z,1509670931.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:11.171Z,1509670931.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:11.517Z,1509670931.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:11.532Z,1509670931.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:11.901Z,1509670931.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:11.966Z,1509670931.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:12.300Z,1509670932.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:12.351Z,1509670932.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:12.702Z,1509670932.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:12.738Z,1509670932.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:13.100Z,1509670933.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:13.123Z,1509670933.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:13.501Z,1509670933.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:13.532Z,1509670933.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:13.914Z,1509670933.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:13.940Z,1509670933.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:14.333Z,1509670934.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:14.348Z,1509670934.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:14.735Z,1509670934.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:14.750Z,1509670934.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:15.107Z,1509670935.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:15.135Z,1509670935.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:15.502Z,1509670935.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:15.533Z,1509670935.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:15.903Z,1509670935.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:15.938Z,1509670935.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:16.303Z,1509670936.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:16.331Z,1509670936.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:16.710Z,1509670936.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:16.725Z,1509670936.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:17.113Z,1509670937.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:17.134Z,1509670937.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:17.510Z,1509670937.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:17.525Z,1509670937.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:17.907Z,1509670937.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:17.922Z,1509670937.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:18.306Z,1509670938.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:18.327Z,1509670938.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:18.707Z,1509670938.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:18.723Z,1509670938.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:19.108Z,1509670939.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:19.123Z,1509670939.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:19.508Z,1509670939.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:19.531Z,1509670939.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:19.922Z,1509670939.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:19.953Z,1509670939.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:20.329Z,1509670940.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:20.353Z,1509670940.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:20.714Z,1509670940.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:20.729Z,1509670940.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:21.107Z,1509670941.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:21.123Z,1509670941.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:21.504Z,1509670941.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:21.523Z,1509670941.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:21.909Z,1509670941.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:21.924Z,1509670941.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:22.307Z,1509670942.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:22.372Z,1509670942.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:22.721Z,1509670942.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:22.736Z,1509670942.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:23.124Z,1509670943.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:23.147Z,1509670943.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:23.517Z,1509670943.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:23.533Z,1509670943.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:23.909Z,1509670943.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:23.980Z,1509670943.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:24.309Z,1509670944.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:24.416Z,1509670944.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:24.716Z,1509670944.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:24.747Z,1509670944.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:25.102Z,1509670945.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:25.129Z,1509670945.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:25.499Z,1509670945.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:25.555Z,1509670945.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:25.926Z,1509670945.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:25.941Z,1509670945.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:26.325Z,1509670946.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:26.382Z,1509670946.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:26.729Z,1509670946.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:26.779Z,1509670946.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:27.097Z,1509670947.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:27.125Z,1509670947.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:27.500Z,1509670947.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:27.528Z,1509670947.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:27.902Z,1509670947.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:27.930Z,1509670947.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:28.295Z,1509670948.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:28.331Z,1509670948.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:28.717Z,1509670948.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:28.733Z,1509670948.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:29.120Z,1509670949.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:29.136Z,1509670949.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:29.505Z,1509670949.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:29.531Z,1509670949.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:29.900Z,1509670949.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:29.927Z,1509670949.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:30.338Z,1509670950.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:30.359Z,1509670950.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:30.703Z,1509670950.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:30.733Z,1509670950.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:31.101Z,1509670951.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:31.135Z,1509670951.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:31.500Z,1509670951.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:31.534Z,1509670951.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:31.922Z,1509670951.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:31.937Z,1509670951.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:32.334Z,1509670952.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:32.349Z,1509670952.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:32.723Z,1509670952.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:32.738Z,1509670952.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:33.096Z,1509670953.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:33.111Z,1509670953.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:33.501Z,1509670953.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:33.532Z,1509670953.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:33.905Z,1509670953.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:33.940Z,1509670953.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:34.308Z,1509670954.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:34.339Z,1509670954.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:34.714Z,1509670954.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:34.742Z,1509670954.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:35.127Z,1509670955.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:35.142Z,1509670955.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:35.531Z,1509670955.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:35.592Z,1509670955.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:35.900Z,1509670955.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:35.916Z,1509670955.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:36.300Z,1509670956.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:36.391Z,1509670956.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:36.707Z,1509670956.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:36.727Z,1509670956.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:37.104Z,1509670957.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:37.120Z,1509670957.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:37.503Z,1509670957.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:37.518Z,1509670957.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:37.913Z,1509670957.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:37.945Z,1509670957.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:38.317Z,1509670958.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:38.349Z,1509670958.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:38.725Z,1509670958.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:38.814Z,1509670958.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:39.104Z,1509670959.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:39.119Z,1509670959.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:39.507Z,1509670959.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:39.562Z,1509670959.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:39.910Z,1509670959.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:39.925Z,1509670959.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:40.304Z,1509670960.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:40.363Z,1509670960.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:40.733Z,1509670960.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:40.797Z,1509670960.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:41.113Z,1509670961.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:41.127Z,1509670961.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:41.510Z,1509670961.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:41.525Z,1509670961.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:41.958Z,1509670961.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:41.974Z,1509670961.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:42.305Z,1509670962.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:42.326Z,1509670962.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:42.707Z,1509670962.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:42.723Z,1509670962.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:43.107Z,1509670963.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:43.122Z,1509670963.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:43.504Z,1509670963.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:43.518Z,1509670963.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:43.921Z,1509670963.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:43.953Z,1509670963.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:44.313Z,1509670964.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:44.328Z,1509670964.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:44.709Z,1509670964.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:44.730Z,1509670964.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:45.103Z,1509670965.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:45.118Z,1509670965.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:45.504Z,1509670965.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:45.520Z,1509670965.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:45.908Z,1509670965.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:45.922Z,1509670965.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:46.306Z,1509670966.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:46.321Z,1509670966.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:46.713Z,1509670966.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:46.729Z,1509670966.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:47.121Z,1509670967.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:47.136Z,1509670967.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:47.510Z,1509670967.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:47.525Z,1509670967.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:47.907Z,1509670967.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:47.922Z,1509670967.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:48.307Z,1509670968.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:48.327Z,1509670968.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:48.710Z,1509670968.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:48.725Z,1509670968.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:49.108Z,1509670969.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:49.123Z,1509670969.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:49.509Z,1509670969.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:49.524Z,1509670969.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:49.914Z,1509670969.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:49.929Z,1509670969.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:50.311Z,1509670970.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:50.396Z,1509670970.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:50.721Z,1509670970.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:50.736Z,1509670970.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:51.110Z,1509670971.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:51.131Z,1509670971.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:51.510Z,1509670971.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:51.531Z,1509670971.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:51.911Z,1509670971.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:51.926Z,1509670971.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:52.308Z,1509670972.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:52.323Z,1509670972.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:52.725Z,1509670972.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:52.763Z,1509670972.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:53.120Z,1509670973.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:53.194Z,1509670973.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:53.520Z,1509670973.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:53.535Z,1509670973.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:53.908Z,1509670973.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:53.963Z,1509670973.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:54.299Z,1509670974.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:54.314Z,1509670974.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:54.713Z,1509670974.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:54.767Z,1509670974.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:55.108Z,1509670975.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:55.163Z,1509670975.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:55.503Z,1509670975.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:55.523Z,1509670975.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:55.913Z,1509670975.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:55.945Z,1509670975.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:56.313Z,1509670976.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:56.344Z,1509670976.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:56.713Z,1509670976.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:56.745Z,1509670976.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:57.107Z,1509670977.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:57.146Z,1509670977.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:57.499Z,1509670977.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:57.519Z,1509670977.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:57.907Z,1509670977.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:57.922Z,1509670977.922 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:57.922Z,1509670977.922 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2017-11-03T01:02:57.922Z,1509670977.922 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:02:57.924Z,1509670977.924 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:57.924Z,1509670977.924 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2017-11-03T01:02:57.924Z,1509670977.924 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:02:57.958Z,1509670977.958 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:57.958Z,1509670977.958 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-11-03T01:02:57.958Z,1509670977.958 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:02:58.091Z,1509670978.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:02:58.091Z,1509670978.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:02:58.092Z,1509670978.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:02:58.303Z,1509670978.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:58.404Z,1509670978.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:02:58.405Z,1509670978.405 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2017-11-03T01:02:58.405Z,1509670978.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:02:58.405Z,1509670978.405 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2017-11-03T01:02:58.406Z,1509670978.406 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:02:58.406Z,1509670978.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-11-03T01:02:58.709Z,1509670978.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:58.723Z,1509670978.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:02:58.724Z,1509670978.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:02:58.724Z,1509670978.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:02:58.725Z,1509670978.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:02:58.725Z,1509670978.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:02:58.726Z,1509670978.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:02:58.726Z,1509670978.726 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:02:58.726Z,1509670978.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:02:58.727Z,1509670978.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:02:59.116Z,1509670979.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:59.134Z,1509670979.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:59.516Z,1509670979.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:59.531Z,1509670979.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:02:59.910Z,1509670979.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:02:59.931Z,1509670979.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:00.307Z,1509670980.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:00.322Z,1509670980.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:00.708Z,1509670980.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:00.723Z,1509670980.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:01.109Z,1509670981.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:01.123Z,1509670981.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:01.511Z,1509670981.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:01.525Z,1509670981.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:01.916Z,1509670981.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:01.931Z,1509670981.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:02.329Z,1509670982.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:02.358Z,1509670982.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:02.716Z,1509670982.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:02.731Z,1509670982.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:03.111Z,1509670983.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:03.131Z,1509670983.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:03.507Z,1509670983.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:03.522Z,1509670983.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:03.908Z,1509670983.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:03.923Z,1509670983.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:04.308Z,1509670984.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:04.370Z,1509670984.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:04.721Z,1509670984.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:04.736Z,1509670984.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:05.122Z,1509670985.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:05.138Z,1509670985.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:05.521Z,1509670985.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:05.537Z,1509670985.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:05.909Z,1509670985.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:05.925Z,1509670985.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:06.308Z,1509670986.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:06.335Z,1509670986.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:06.720Z,1509670986.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:06.782Z,1509670986.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:07.113Z,1509670987.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:07.129Z,1509670987.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:10.392Z,1509670990.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:10.474Z,1509670990.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:10.616Z,1509670990.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:10.632Z,1509670990.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:11.001Z,1509670991.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:11.027Z,1509670991.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:11.400Z,1509670991.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:11.443Z,1509670991.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:11.788Z,1509670991.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:11.803Z,1509670991.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:12.213Z,1509670992.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:12.273Z,1509670992.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:12.593Z,1509670992.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:12.622Z,1509670992.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:13.001Z,1509670993.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:13.055Z,1509670993.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:13.408Z,1509670993.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:13.423Z,1509670993.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:13.801Z,1509670993.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:13.825Z,1509670993.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:14.198Z,1509670994.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:14.219Z,1509670994.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:14.593Z,1509670994.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:14.623Z,1509670994.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:14.991Z,1509670994.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:15.026Z,1509670995.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:15.386Z,1509670995.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:15.413Z,1509670995.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:15.803Z,1509670995.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:15.823Z,1509670995.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:16.207Z,1509670996.207 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:03:16.207Z,1509670996.207 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T01:03:16.207Z,1509670996.207 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:03:16.227Z,1509670996.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:16.275Z,1509670996.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T01:03:16.276Z,1509670996.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:16.377Z,1509670996.377 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:03:16.377Z,1509670996.377 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T01:03:16.609Z,1509670996.609 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:03:16.629Z,1509670996.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:16.684Z,1509670996.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T01:03:16.686Z,1509670996.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:16.791Z,1509670996.791 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:03:17.003Z,1509670997.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:17.022Z,1509670997.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:03:17.023Z,1509670997.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:17.390Z,1509670997.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:17.415Z,1509670997.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:03:17.417Z,1509670997.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:17.792Z,1509670997.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:17.823Z,1509670997.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:03:17.824Z,1509670997.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:18.195Z,1509670998.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:18.210Z,1509670998.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:03:18.211Z,1509670998.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:18.597Z,1509670998.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:18.612Z,1509670998.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:03:18.613Z,1509670998.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:19.002Z,1509670999.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:19.016Z,1509670999.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:03:19.017Z,1509670999.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:19.401Z,1509670999.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:19.422Z,1509670999.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:03:19.423Z,1509670999.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:19.800Z,1509670999.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:19.815Z,1509670999.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:03:19.816Z,1509670999.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:20.195Z,1509671000.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:20.214Z,1509671000.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:03:20.215Z,1509671000.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:20.596Z,1509671000.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:20.610Z,1509671000.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:03:20.611Z,1509671000.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:20.999Z,1509671000.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:21.013Z,1509671001.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:03:21.014Z,1509671001.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:21.396Z,1509671001.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:21.411Z,1509671001.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:03:21.412Z,1509671001.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:21.802Z,1509671001.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:21.822Z,1509671001.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:03:21.823Z,1509671001.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:22.205Z,1509671002.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:22.219Z,1509671002.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:03:22.221Z,1509671002.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:22.602Z,1509671002.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:22.616Z,1509671002.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:03:22.617Z,1509671002.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:22.995Z,1509671002.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:23.014Z,1509671003.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:03:23.015Z,1509671003.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:23.399Z,1509671003.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:23.413Z,1509671003.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:03:23.414Z,1509671003.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:23.798Z,1509671003.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:23.813Z,1509671003.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:03:23.814Z,1509671003.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:24.195Z,1509671004.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:24.210Z,1509671004.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:03:24.211Z,1509671004.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:24.598Z,1509671004.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:24.613Z,1509671004.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:03:24.614Z,1509671004.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:25.002Z,1509671005.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:25.068Z,1509671005.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:03:25.069Z,1509671005.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:25.401Z,1509671005.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:25.468Z,1509671005.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T01:03:25.469Z,1509671005.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:25.801Z,1509671005.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:25.816Z,1509671005.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:03:25.817Z,1509671005.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:26.196Z,1509671006.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:26.254Z,1509671006.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:03:26.255Z,1509671006.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:26.595Z,1509671006.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:26.610Z,1509671006.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:03:26.611Z,1509671006.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:26.993Z,1509671006.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:27.039Z,1509671007.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:03:27.040Z,1509671007.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:27.396Z,1509671007.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:27.454Z,1509671007.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:03:27.454Z,1509671007.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:27.802Z,1509671007.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:27.817Z,1509671007.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:03:27.818Z,1509671007.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:28.205Z,1509671008.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:28.219Z,1509671008.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:03:28.220Z,1509671008.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:28.602Z,1509671008.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:28.616Z,1509671008.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:03:28.617Z,1509671008.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:28.998Z,1509671008.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:29.013Z,1509671009.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:03:29.014Z,1509671009.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:29.393Z,1509671009.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:29.407Z,1509671009.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:03:29.408Z,1509671009.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:29.797Z,1509671009.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:29.812Z,1509671009.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:03:29.813Z,1509671009.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:30.197Z,1509671010.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:30.211Z,1509671010.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:03:30.212Z,1509671010.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:30.593Z,1509671010.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:30.607Z,1509671010.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:03:30.608Z,1509671010.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:31.001Z,1509671011.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:31.016Z,1509671011.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:03:31.017Z,1509671011.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:31.402Z,1509671011.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:31.422Z,1509671011.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:03:31.423Z,1509671011.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:31.801Z,1509671011.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:31.822Z,1509671011.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:03:31.823Z,1509671011.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:32.196Z,1509671012.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:32.218Z,1509671012.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:03:32.219Z,1509671012.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:32.596Z,1509671012.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:32.611Z,1509671012.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:03:32.612Z,1509671012.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:32.993Z,1509671012.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:33.007Z,1509671013.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:03:33.008Z,1509671013.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:33.395Z,1509671013.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:33.411Z,1509671013.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:03:33.412Z,1509671013.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:33.802Z,1509671013.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:33.822Z,1509671013.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:03:33.823Z,1509671013.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:34.200Z,1509671014.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:34.214Z,1509671014.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:03:34.215Z,1509671014.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:34.602Z,1509671014.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:34.617Z,1509671014.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:03:34.618Z,1509671014.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:34.998Z,1509671014.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:35.018Z,1509671015.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T01:03:35.019Z,1509671015.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:35.398Z,1509671015.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:35.413Z,1509671015.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:03:35.413Z,1509671015.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:35.796Z,1509671015.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:35.811Z,1509671015.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T01:03:35.812Z,1509671015.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:36.199Z,1509671016.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:36.215Z,1509671016.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:36.600Z,1509671016.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:36.615Z,1509671016.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:37.004Z,1509671017.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:37.019Z,1509671017.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:37.406Z,1509671017.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:37.421Z,1509671017.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:37.806Z,1509671017.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:37.821Z,1509671017.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:38.196Z,1509671018.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:38.211Z,1509671018.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:38.600Z,1509671018.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:38.615Z,1509671018.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:39.002Z,1509671019.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:39.017Z,1509671019.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:39.402Z,1509671019.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:39.466Z,1509671019.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:39.808Z,1509671019.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:39.855Z,1509671019.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:40.206Z,1509671020.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:40.221Z,1509671020.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:40.608Z,1509671020.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:40.624Z,1509671020.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:40.999Z,1509671020.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:41.058Z,1509671021.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:41.397Z,1509671021.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:41.415Z,1509671021.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:41.800Z,1509671021.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:41.854Z,1509671021.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:42.197Z,1509671022.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:42.250Z,1509671022.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:42.599Z,1509671022.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:42.614Z,1509671022.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:43.009Z,1509671023.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:43.024Z,1509671023.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:43.408Z,1509671023.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:43.423Z,1509671023.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:43.809Z,1509671023.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:43.824Z,1509671023.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:44.198Z,1509671024.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:44.219Z,1509671024.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:44.598Z,1509671024.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:44.615Z,1509671024.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:44.999Z,1509671024.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:45.014Z,1509671025.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:45.392Z,1509671025.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:45.408Z,1509671025.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:45.810Z,1509671025.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:45.826Z,1509671025.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:46.208Z,1509671026.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:46.222Z,1509671026.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:46.604Z,1509671026.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:46.619Z,1509671026.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:46.999Z,1509671026.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:47.019Z,1509671027.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:47.398Z,1509671027.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:47.413Z,1509671027.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:47.798Z,1509671027.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:47.819Z,1509671027.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:48.199Z,1509671028.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:48.214Z,1509671028.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:48.598Z,1509671028.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:48.618Z,1509671028.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:49.004Z,1509671029.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:49.019Z,1509671029.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:49.408Z,1509671029.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:49.423Z,1509671029.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:49.809Z,1509671029.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:49.823Z,1509671029.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:50.191Z,1509671030.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:50.247Z,1509671030.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:50.595Z,1509671030.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:50.611Z,1509671030.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:50.996Z,1509671030.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:51.011Z,1509671031.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:51.395Z,1509671031.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:51.410Z,1509671031.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:51.802Z,1509671031.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:51.838Z,1509671031.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:52.209Z,1509671032.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:52.239Z,1509671032.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:52.610Z,1509671032.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:52.638Z,1509671032.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:52.994Z,1509671032.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:53.009Z,1509671033.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:53.396Z,1509671033.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:53.418Z,1509671033.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:53.798Z,1509671033.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:53.814Z,1509671033.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:54.198Z,1509671034.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:54.262Z,1509671034.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:54.597Z,1509671034.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:54.668Z,1509671034.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:54.999Z,1509671034.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:55.019Z,1509671035.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:55.405Z,1509671035.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:55.451Z,1509671035.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:55.801Z,1509671035.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:55.822Z,1509671035.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:56.192Z,1509671036.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:56.250Z,1509671036.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:56.598Z,1509671036.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:56.651Z,1509671036.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:56.993Z,1509671036.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:57.007Z,1509671037.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:57.392Z,1509671037.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:57.406Z,1509671037.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:57.802Z,1509671037.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:57.823Z,1509671037.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:58.205Z,1509671038.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:58.219Z,1509671038.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:58.602Z,1509671038.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:58.617Z,1509671038.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:58.998Z,1509671038.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:59.013Z,1509671039.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:59.392Z,1509671039.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:59.407Z,1509671039.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:03:59.798Z,1509671039.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:03:59.813Z,1509671039.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:00.196Z,1509671040.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:00.211Z,1509671040.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:00.596Z,1509671040.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:00.618Z,1509671040.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:00.999Z,1509671040.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:01.019Z,1509671041.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:01.401Z,1509671041.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:01.416Z,1509671041.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:01.801Z,1509671041.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:01.815Z,1509671041.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:02.192Z,1509671042.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:02.207Z,1509671042.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:02.595Z,1509671042.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:02.610Z,1509671042.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:02.996Z,1509671042.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:03.011Z,1509671043.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:03.391Z,1509671043.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:03.407Z,1509671043.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:03.802Z,1509671043.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:03.823Z,1509671043.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:04.200Z,1509671044.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:04.218Z,1509671044.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:04.602Z,1509671044.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:04.617Z,1509671044.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:04.998Z,1509671044.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:05.013Z,1509671045.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:05.396Z,1509671045.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:05.411Z,1509671045.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:05.799Z,1509671045.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:05.814Z,1509671045.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:06.198Z,1509671046.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:06.219Z,1509671046.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:06.598Z,1509671046.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:06.613Z,1509671046.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:07.002Z,1509671047.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:07.017Z,1509671047.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:07.405Z,1509671047.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:07.421Z,1509671047.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:10.499Z,1509671050.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:10.586Z,1509671050.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:10.716Z,1509671050.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:10.758Z,1509671050.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:11.117Z,1509671051.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:11.152Z,1509671051.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:11.515Z,1509671051.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:11.563Z,1509671051.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:11.919Z,1509671051.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:11.954Z,1509671051.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:12.318Z,1509671052.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:12.371Z,1509671052.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:12.729Z,1509671052.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:12.762Z,1509671052.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:13.129Z,1509671053.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:13.197Z,1509671053.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:13.529Z,1509671053.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:13.555Z,1509671053.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:13.916Z,1509671053.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:13.931Z,1509671053.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:14.316Z,1509671054.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:14.331Z,1509671054.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:14.716Z,1509671054.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:14.731Z,1509671054.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:15.123Z,1509671055.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:15.160Z,1509671055.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:15.516Z,1509671055.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:15.531Z,1509671055.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:15.930Z,1509671055.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:15.955Z,1509671055.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:16.329Z,1509671056.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:16.356Z,1509671056.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:16.729Z,1509671056.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:16.755Z,1509671056.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:17.116Z,1509671057.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:17.131Z,1509671057.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:17.516Z,1509671057.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:17.530Z,1509671057.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:17.917Z,1509671057.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:17.932Z,1509671057.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:18.322Z,1509671058.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:18.357Z,1509671058.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:18.729Z,1509671058.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:18.756Z,1509671058.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:19.129Z,1509671059.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:19.156Z,1509671059.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:19.529Z,1509671059.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:19.555Z,1509671059.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:19.916Z,1509671059.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:19.958Z,1509671059.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:20.316Z,1509671060.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:20.335Z,1509671060.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:20.716Z,1509671060.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:20.731Z,1509671060.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:21.117Z,1509671061.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:21.131Z,1509671061.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:21.517Z,1509671061.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:21.532Z,1509671061.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:21.929Z,1509671061.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:21.959Z,1509671061.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:22.329Z,1509671062.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:22.360Z,1509671062.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:22.730Z,1509671062.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:22.760Z,1509671062.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:23.116Z,1509671063.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:23.131Z,1509671063.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:23.516Z,1509671063.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:23.530Z,1509671063.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:23.917Z,1509671063.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:23.932Z,1509671063.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:24.326Z,1509671064.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:24.349Z,1509671064.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:24.734Z,1509671064.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:24.762Z,1509671064.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:25.134Z,1509671065.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:25.191Z,1509671065.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:25.534Z,1509671065.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:25.591Z,1509671065.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:25.919Z,1509671065.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:25.934Z,1509671065.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:26.318Z,1509671066.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:26.338Z,1509671066.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:26.720Z,1509671066.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:26.774Z,1509671066.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:27.121Z,1509671067.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:27.135Z,1509671067.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:27.520Z,1509671067.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:27.570Z,1509671067.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:27.933Z,1509671067.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:27.978Z,1509671067.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:28.333Z,1509671068.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:28.363Z,1509671068.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:28.734Z,1509671068.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:28.761Z,1509671068.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:29.120Z,1509671069.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:29.135Z,1509671069.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:29.520Z,1509671069.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:29.542Z,1509671069.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:29.922Z,1509671069.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:29.937Z,1509671069.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:30.321Z,1509671070.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:30.336Z,1509671070.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:30.733Z,1509671070.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:30.763Z,1509671070.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:31.125Z,1509671071.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:31.141Z,1509671071.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:31.533Z,1509671071.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:31.564Z,1509671071.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:31.920Z,1509671071.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:31.935Z,1509671071.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:32.321Z,1509671072.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:32.335Z,1509671072.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:32.718Z,1509671072.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:32.750Z,1509671072.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:33.128Z,1509671073.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:33.142Z,1509671073.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:33.520Z,1509671073.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:33.537Z,1509671073.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:33.930Z,1509671073.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:33.951Z,1509671073.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:34.329Z,1509671074.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:34.345Z,1509671074.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:34.730Z,1509671074.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:34.747Z,1509671074.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:35.124Z,1509671075.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:35.139Z,1509671075.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:35.526Z,1509671075.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:35.541Z,1509671075.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:35.920Z,1509671075.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:35.935Z,1509671075.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:36.323Z,1509671076.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:36.338Z,1509671076.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:36.729Z,1509671076.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:36.744Z,1509671076.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:37.127Z,1509671077.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:37.143Z,1509671077.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:37.529Z,1509671077.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:37.545Z,1509671077.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:37.925Z,1509671077.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:37.940Z,1509671077.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:38.326Z,1509671078.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:38.341Z,1509671078.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:38.726Z,1509671078.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:38.741Z,1509671078.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:39.123Z,1509671079.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:39.153Z,1509671079.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:39.526Z,1509671079.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:39.543Z,1509671079.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:39.931Z,1509671079.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:40.018Z,1509671080.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:40.335Z,1509671080.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:40.350Z,1509671080.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:40.735Z,1509671080.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:40.787Z,1509671080.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:41.126Z,1509671081.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:41.143Z,1509671081.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:41.526Z,1509671081.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:41.586Z,1509671081.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:41.927Z,1509671081.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:41.986Z,1509671081.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:42.325Z,1509671082.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:42.341Z,1509671082.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:42.737Z,1509671082.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:42.751Z,1509671082.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:43.135Z,1509671083.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:43.155Z,1509671083.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:43.535Z,1509671083.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:43.555Z,1509671083.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:43.924Z,1509671083.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:43.943Z,1509671083.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:44.308Z,1509671084.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:44.333Z,1509671084.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:44.723Z,1509671084.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:44.739Z,1509671084.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:45.127Z,1509671085.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:45.142Z,1509671085.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:45.508Z,1509671085.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:45.533Z,1509671085.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:45.936Z,1509671085.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:45.959Z,1509671085.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:46.336Z,1509671086.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:46.350Z,1509671086.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:46.732Z,1509671086.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:46.748Z,1509671086.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:47.123Z,1509671087.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:47.139Z,1509671087.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:47.526Z,1509671087.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:47.541Z,1509671087.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:47.927Z,1509671087.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:47.942Z,1509671087.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:48.323Z,1509671088.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:48.339Z,1509671088.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:48.736Z,1509671088.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:48.758Z,1509671088.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:49.135Z,1509671089.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:49.155Z,1509671089.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:49.536Z,1509671089.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:49.559Z,1509671089.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:49.926Z,1509671089.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:49.941Z,1509671089.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:50.326Z,1509671090.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:50.343Z,1509671090.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:50.725Z,1509671090.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:50.741Z,1509671090.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:51.127Z,1509671091.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:51.142Z,1509671091.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:51.526Z,1509671091.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:51.543Z,1509671091.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:51.937Z,1509671091.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:51.951Z,1509671091.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:52.337Z,1509671092.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:52.358Z,1509671092.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:52.737Z,1509671092.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:52.752Z,1509671092.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:53.125Z,1509671093.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:53.142Z,1509671093.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:53.528Z,1509671093.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:53.543Z,1509671093.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:53.927Z,1509671093.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:53.983Z,1509671093.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:54.326Z,1509671094.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:54.366Z,1509671094.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:54.737Z,1509671094.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:54.752Z,1509671094.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:55.133Z,1509671095.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:55.155Z,1509671095.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:55.537Z,1509671095.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:55.591Z,1509671095.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:55.916Z,1509671095.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:55.951Z,1509671095.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:56.312Z,1509671096.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:56.359Z,1509671096.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:56.716Z,1509671096.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:56.775Z,1509671096.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:57.117Z,1509671097.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:57.145Z,1509671097.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:57.519Z,1509671097.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:57.544Z,1509671097.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:57.935Z,1509671097.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:57.963Z,1509671097.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:58.341Z,1509671098.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:58.356Z,1509671098.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:58.737Z,1509671098.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:58.752Z,1509671098.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:59.116Z,1509671099.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:59.147Z,1509671099.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:59.516Z,1509671099.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:59.531Z,1509671099.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:04:59.921Z,1509671099.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:04:59.958Z,1509671099.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:00.312Z,1509671100.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:00.327Z,1509671100.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:00.729Z,1509671100.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:00.757Z,1509671100.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:01.129Z,1509671101.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:01.156Z,1509671101.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:01.529Z,1509671101.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:01.556Z,1509671101.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:01.919Z,1509671101.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:01.959Z,1509671101.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:02.316Z,1509671102.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:02.335Z,1509671102.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:02.716Z,1509671102.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:02.739Z,1509671102.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:03.124Z,1509671103.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:03.139Z,1509671103.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:03.516Z,1509671103.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:03.531Z,1509671103.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:03.934Z,1509671103.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:03.958Z,1509671103.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:04.334Z,1509671104.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:04.358Z,1509671104.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:04.730Z,1509671104.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:04.760Z,1509671104.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:05.121Z,1509671105.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:05.136Z,1509671105.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:05.520Z,1509671105.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:05.535Z,1509671105.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:05.916Z,1509671105.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:05.931Z,1509671105.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:06.321Z,1509671106.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:06.336Z,1509671106.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:06.733Z,1509671106.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:06.758Z,1509671106.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:07.137Z,1509671107.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:07.167Z,1509671107.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:07.538Z,1509671107.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:07.567Z,1509671107.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:10.617Z,1509671110.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:10.701Z,1509671110.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:10.842Z,1509671110.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:10.873Z,1509671110.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:11.224Z,1509671111.224 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T01:05:11.224Z,1509671111.224 [NAL9602] Data Fault, FailCount= 5
2017-11-03T01:05:11.224Z,1509671111.224 [NAL9602](ERROR): Data Fault
2017-11-03T01:05:11.244Z,1509671111.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:11.279Z,1509671111.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:11.365Z,1509671111.365 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T01:05:11.365Z,1509671111.365 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T01:05:11.630Z,1509671111.630 [NAL9602](INFO): Powering down
2017-11-03T01:05:11.648Z,1509671111.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:11.722Z,1509671111.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:11.808Z,1509671111.808 [CBIT](INFO): Critical error at 20171103T010511
2017-11-03T01:05:12.042Z,1509671112.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:12.071Z,1509671112.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:12.442Z,1509671112.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:12.450Z,1509671112.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x42658 got:0x7106
2017-11-03T01:05:12.514Z,1509671112.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:12.842Z,1509671112.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:12.895Z,1509671112.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:13.242Z,1509671113.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:13.274Z,1509671113.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:13.642Z,1509671113.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:13.673Z,1509671113.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:14.046Z,1509671114.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:14.071Z,1509671114.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:14.445Z,1509671114.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:14.473Z,1509671114.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:14.839Z,1509671114.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:14.873Z,1509671114.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:15.239Z,1509671115.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:15.274Z,1509671115.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:15.644Z,1509671115.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:15.673Z,1509671115.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:16.044Z,1509671116.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:16.073Z,1509671116.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:16.439Z,1509671116.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:16.482Z,1509671116.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:16.842Z,1509671116.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:16.875Z,1509671116.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:17.240Z,1509671117.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:17.273Z,1509671117.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:17.642Z,1509671117.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:17.673Z,1509671117.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:18.039Z,1509671118.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:18.079Z,1509671118.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:18.442Z,1509671118.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:18.474Z,1509671118.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:18.842Z,1509671118.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:18.873Z,1509671118.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:19.242Z,1509671119.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:19.273Z,1509671119.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:19.642Z,1509671119.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:19.673Z,1509671119.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:20.041Z,1509671120.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:20.075Z,1509671120.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:20.446Z,1509671120.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:20.471Z,1509671120.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:20.843Z,1509671120.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:20.870Z,1509671120.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:21.243Z,1509671121.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:21.282Z,1509671121.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:21.639Z,1509671121.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:21.675Z,1509671121.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:22.044Z,1509671122.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:22.059Z,1509671122.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:22.441Z,1509671122.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:22.457Z,1509671122.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:22.838Z,1509671122.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:22.882Z,1509671122.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:23.239Z,1509671123.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:23.259Z,1509671123.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:23.639Z,1509671123.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:23.658Z,1509671123.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:24.041Z,1509671124.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:24.057Z,1509671124.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:24.439Z,1509671124.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:24.479Z,1509671124.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:24.842Z,1509671124.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:24.899Z,1509671124.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:25.240Z,1509671125.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:25.258Z,1509671125.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:25.640Z,1509671125.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:25.655Z,1509671125.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:26.038Z,1509671126.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:26.078Z,1509671126.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:26.438Z,1509671126.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:26.458Z,1509671126.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:26.848Z,1509671126.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:26.881Z,1509671126.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:27.241Z,1509671127.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:27.255Z,1509671127.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:27.638Z,1509671127.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:27.682Z,1509671127.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:28.038Z,1509671128.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:28.048Z,1509671128.048 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:05:28.048Z,1509671128.048 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:05:28.048Z,1509671128.048 [BPC1](ERROR): Communications Fault
2017-11-03T01:05:28.059Z,1509671128.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:28.161Z,1509671128.161 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:05:28.438Z,1509671128.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:28.456Z,1509671128.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:28.841Z,1509671128.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:28.856Z,1509671128.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:29.238Z,1509671129.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:29.281Z,1509671129.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:29.370Z,1509671129.370 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:05:29.370Z,1509671129.370 [BPC1] No Fault, FailCount= 1
2017-11-03T01:05:29.638Z,1509671129.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:29.721Z,1509671129.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:30.040Z,1509671130.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:30.057Z,1509671130.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:30.440Z,1509671130.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:30.455Z,1509671130.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:30.838Z,1509671130.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:30.879Z,1509671130.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:31.247Z,1509671131.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:31.281Z,1509671131.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:31.648Z,1509671131.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:31.663Z,1509671131.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:32.041Z,1509671132.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:32.055Z,1509671132.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:32.438Z,1509671132.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:32.480Z,1509671132.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:32.842Z,1509671132.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:32.861Z,1509671132.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:33.240Z,1509671133.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:33.256Z,1509671133.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:33.641Z,1509671133.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:33.691Z,1509671133.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:34.043Z,1509671134.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:34.079Z,1509671134.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:34.442Z,1509671134.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:34.461Z,1509671134.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:34.848Z,1509671134.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:34.863Z,1509671134.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:35.248Z,1509671135.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:35.262Z,1509671135.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:35.638Z,1509671135.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:35.681Z,1509671135.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:36.038Z,1509671136.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:36.058Z,1509671136.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:36.445Z,1509671136.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:36.460Z,1509671136.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:36.844Z,1509671136.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:36.859Z,1509671136.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:37.238Z,1509671137.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:37.280Z,1509671137.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:37.642Z,1509671137.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:37.660Z,1509671137.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:38.039Z,1509671138.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:38.056Z,1509671138.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:38.448Z,1509671138.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:38.463Z,1509671138.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:38.846Z,1509671138.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:38.879Z,1509671138.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:39.238Z,1509671139.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:39.257Z,1509671139.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:39.640Z,1509671139.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:39.657Z,1509671139.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:40.040Z,1509671140.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:40.055Z,1509671140.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:40.438Z,1509671140.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:40.479Z,1509671140.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:40.838Z,1509671140.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:40.858Z,1509671140.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:41.245Z,1509671141.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:41.285Z,1509671141.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:41.647Z,1509671141.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:41.662Z,1509671141.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:42.043Z,1509671142.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:42.083Z,1509671142.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:42.442Z,1509671142.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:42.461Z,1509671142.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:42.840Z,1509671142.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:42.857Z,1509671142.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:43.248Z,1509671143.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:43.263Z,1509671143.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:43.643Z,1509671143.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:43.683Z,1509671143.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:44.038Z,1509671144.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:44.058Z,1509671144.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:44.440Z,1509671144.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:44.506Z,1509671144.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:44.850Z,1509671144.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:44.864Z,1509671144.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:45.242Z,1509671145.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:45.274Z,1509671145.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:45.648Z,1509671145.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:45.699Z,1509671145.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:46.049Z,1509671146.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:46.064Z,1509671146.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:46.444Z,1509671146.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:46.490Z,1509671146.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:46.844Z,1509671146.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:46.899Z,1509671146.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:47.246Z,1509671147.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:47.265Z,1509671147.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:47.650Z,1509671147.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:47.664Z,1509671147.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:48.050Z,1509671148.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:48.065Z,1509671148.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:48.447Z,1509671148.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:48.489Z,1509671148.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:48.842Z,1509671148.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:48.861Z,1509671148.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:49.249Z,1509671149.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:49.264Z,1509671149.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:49.650Z,1509671149.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:49.665Z,1509671149.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:50.048Z,1509671150.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:50.075Z,1509671150.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:50.448Z,1509671150.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:50.466Z,1509671150.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:50.849Z,1509671150.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:50.864Z,1509671150.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:51.246Z,1509671151.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:51.261Z,1509671151.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:51.648Z,1509671151.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:51.692Z,1509671151.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:52.049Z,1509671152.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:52.074Z,1509671152.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:52.450Z,1509671152.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:52.464Z,1509671152.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:52.851Z,1509671152.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:52.875Z,1509671152.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:53.240Z,1509671153.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:53.303Z,1509671153.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:53.639Z,1509671153.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:53.669Z,1509671153.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x41423 got:0x259
2017-11-03T01:05:53.714Z,1509671153.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:54.066Z,1509671154.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:54.113Z,1509671154.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:54.449Z,1509671154.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:54.470Z,1509671154.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:54.839Z,1509671154.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:54.903Z,1509671154.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:55.251Z,1509671155.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:55.260Z,1509671155.260 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-03T01:05:55.313Z,1509671155.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:55.654Z,1509671155.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:55.670Z,1509671155.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:56.068Z,1509671156.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:56.087Z,1509671156.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:56.480Z,1509671156.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:56.530Z,1509671156.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:56.856Z,1509671156.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:56.875Z,1509671156.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:57.249Z,1509671157.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:57.334Z,1509671157.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:57.665Z,1509671157.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:57.693Z,1509671157.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:58.068Z,1509671158.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:58.099Z,1509671158.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:58.440Z,1509671158.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:58.479Z,1509671158.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:58.854Z,1509671158.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:58.865Z,1509671158.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-11-03T01:05:58.923Z,1509671158.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:58.923Z,1509671158.923 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2017-11-03T01:05:58.923Z,1509671158.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:05:58.925Z,1509671158.925 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:58.926Z,1509671158.926 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2017-11-03T01:05:58.926Z,1509671158.926 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:05:58.927Z,1509671158.927 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:05:58.928Z,1509671158.928 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-11-03T01:05:58.928Z,1509671158.928 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:05:59.064Z,1509671159.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:05:59.065Z,1509671159.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:05:59.065Z,1509671159.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:05:59.272Z,1509671159.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:59.432Z,1509671159.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:05:59.433Z,1509671159.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2017-11-03T01:05:59.433Z,1509671159.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:05:59.433Z,1509671159.433 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2017-11-03T01:05:59.434Z,1509671159.434 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:05:59.434Z,1509671159.434 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-11-03T01:05:59.641Z,1509671159.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:05:59.717Z,1509671159.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:05:59.718Z,1509671159.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:05:59.718Z,1509671159.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:05:59.719Z,1509671159.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:05:59.719Z,1509671159.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:05:59.719Z,1509671159.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:05:59.720Z,1509671159.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:05:59.720Z,1509671159.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:05:59.721Z,1509671159.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:06:00.058Z,1509671160.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:00.122Z,1509671160.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:06:00.123Z,1509671160.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:00.476Z,1509671160.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:00.494Z,1509671160.494 [PNI_TCM](ERROR): CRC does not match. Expected:0x15588 got:0x33
2017-11-03T01:06:00.571Z,1509671160.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:06:00.571Z,1509671160.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:00.871Z,1509671160.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:00.913Z,1509671160.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:06:00.914Z,1509671160.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:01.239Z,1509671161.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:01.330Z,1509671161.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:06:01.331Z,1509671161.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:01.640Z,1509671161.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:01.690Z,1509671161.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:06:01.691Z,1509671161.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:02.044Z,1509671162.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:02.102Z,1509671162.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:06:02.103Z,1509671162.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:02.454Z,1509671162.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:02.518Z,1509671162.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:06:02.518Z,1509671162.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:02.847Z,1509671162.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:02.906Z,1509671162.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:06:02.907Z,1509671162.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:03.248Z,1509671163.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:03.319Z,1509671163.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:06:03.320Z,1509671163.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:03.650Z,1509671163.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:03.725Z,1509671163.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:06:03.726Z,1509671163.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:04.062Z,1509671164.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:04.109Z,1509671164.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:06:04.110Z,1509671164.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:04.439Z,1509671164.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:04.470Z,1509671164.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T01:06:04.471Z,1509671164.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:04.839Z,1509671164.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:04.882Z,1509671164.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:06:04.883Z,1509671164.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:05.244Z,1509671165.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:05.282Z,1509671165.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:06:05.283Z,1509671165.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:05.649Z,1509671165.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:05.698Z,1509671165.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:06:05.699Z,1509671165.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:06.046Z,1509671166.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:06.103Z,1509671166.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:06:06.104Z,1509671166.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:06.449Z,1509671166.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:06.482Z,1509671166.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:06:06.483Z,1509671166.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:06.850Z,1509671166.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:06.913Z,1509671166.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:06:06.914Z,1509671166.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:07.242Z,1509671167.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:07.299Z,1509671167.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:06:07.300Z,1509671167.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:07.641Z,1509671167.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:07.679Z,1509671167.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:06:07.680Z,1509671167.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:10.954Z,1509671170.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:10.983Z,1509671170.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T01:06:10.984Z,1509671170.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:11.111Z,1509671171.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:11.162Z,1509671171.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T01:06:11.163Z,1509671171.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:11.520Z,1509671171.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:11.542Z,1509671171.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T01:06:11.543Z,1509671171.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:11.910Z,1509671171.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:11.959Z,1509671171.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T01:06:11.960Z,1509671171.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:12.314Z,1509671172.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:12.338Z,1509671172.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T01:06:12.339Z,1509671172.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:12.712Z,1509671172.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:12.736Z,1509671172.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T01:06:12.737Z,1509671172.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:13.114Z,1509671173.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:13.155Z,1509671173.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T01:06:13.156Z,1509671173.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:13.514Z,1509671173.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:13.539Z,1509671173.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T01:06:13.540Z,1509671173.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:13.911Z,1509671173.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:13.936Z,1509671173.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T01:06:13.937Z,1509671173.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:14.314Z,1509671174.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:14.362Z,1509671174.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T01:06:14.363Z,1509671174.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:14.712Z,1509671174.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:14.736Z,1509671174.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T01:06:14.737Z,1509671174.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:15.111Z,1509671175.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:15.173Z,1509671175.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-03T01:06:15.174Z,1509671175.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:15.514Z,1509671175.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:15.563Z,1509671175.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T01:06:15.564Z,1509671175.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:15.912Z,1509671175.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:15.936Z,1509671175.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T01:06:15.937Z,1509671175.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:16.314Z,1509671176.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:16.339Z,1509671176.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T01:06:16.340Z,1509671176.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:16.711Z,1509671176.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:16.735Z,1509671176.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T01:06:16.736Z,1509671176.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:17.110Z,1509671177.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:17.135Z,1509671177.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T01:06:17.136Z,1509671177.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:17.514Z,1509671177.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:17.539Z,1509671177.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T01:06:17.540Z,1509671177.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:17.909Z,1509671177.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:17.936Z,1509671177.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T01:06:17.937Z,1509671177.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:18.312Z,1509671178.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:18.337Z,1509671178.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T01:06:18.338Z,1509671178.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:18.712Z,1509671178.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:18.737Z,1509671178.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T01:06:18.738Z,1509671178.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:19.108Z,1509671179.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:19.137Z,1509671179.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:19.515Z,1509671179.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:19.540Z,1509671179.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:19.910Z,1509671179.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:19.949Z,1509671179.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:20.314Z,1509671180.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:20.339Z,1509671180.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:20.714Z,1509671180.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:20.740Z,1509671180.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:21.111Z,1509671181.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:21.145Z,1509671181.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:21.508Z,1509671181.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:21.539Z,1509671181.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:21.908Z,1509671181.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:21.923Z,1509671181.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:22.311Z,1509671182.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:22.342Z,1509671182.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:22.715Z,1509671182.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:22.745Z,1509671182.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:23.117Z,1509671183.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:23.145Z,1509671183.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:23.513Z,1509671183.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:23.527Z,1509671183.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:23.966Z,1509671183.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:23.997Z,1509671183.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:24.312Z,1509671184.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:24.328Z,1509671184.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:24.715Z,1509671184.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:24.756Z,1509671184.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:25.118Z,1509671185.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:25.154Z,1509671185.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:25.512Z,1509671185.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:25.527Z,1509671185.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:25.913Z,1509671185.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:25.928Z,1509671185.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:26.310Z,1509671186.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:26.347Z,1509671186.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:26.708Z,1509671186.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:26.723Z,1509671186.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:27.111Z,1509671187.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:27.174Z,1509671187.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:27.509Z,1509671187.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:27.524Z,1509671187.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:27.910Z,1509671187.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:27.926Z,1509671187.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:28.314Z,1509671188.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:28.363Z,1509671188.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:28.709Z,1509671188.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:28.723Z,1509671188.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:29.109Z,1509671189.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:29.167Z,1509671189.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:29.514Z,1509671189.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:29.567Z,1509671189.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:29.918Z,1509671189.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:29.932Z,1509671189.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:30.309Z,1509671190.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:30.324Z,1509671190.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:30.714Z,1509671190.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:30.735Z,1509671190.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:31.110Z,1509671191.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:31.127Z,1509671191.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:31.509Z,1509671191.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:31.524Z,1509671191.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:31.914Z,1509671191.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:31.935Z,1509671191.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:32.310Z,1509671192.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:32.325Z,1509671192.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:32.710Z,1509671192.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:32.725Z,1509671192.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:33.114Z,1509671193.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:33.135Z,1509671193.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:33.514Z,1509671193.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:33.529Z,1509671193.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:33.913Z,1509671193.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:33.928Z,1509671193.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:34.318Z,1509671194.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:34.339Z,1509671194.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:34.714Z,1509671194.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:34.729Z,1509671194.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:35.113Z,1509671195.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:35.128Z,1509671195.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:35.518Z,1509671195.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:35.539Z,1509671195.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:35.914Z,1509671195.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:35.929Z,1509671195.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:36.314Z,1509671196.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:36.329Z,1509671196.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:36.714Z,1509671196.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:36.735Z,1509671196.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:37.114Z,1509671197.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:37.128Z,1509671197.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:37.518Z,1509671197.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:37.533Z,1509671197.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:37.914Z,1509671197.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:37.935Z,1509671197.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:38.314Z,1509671198.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:38.329Z,1509671198.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:38.715Z,1509671198.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:38.731Z,1509671198.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:39.114Z,1509671199.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:39.135Z,1509671199.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:39.514Z,1509671199.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:39.534Z,1509671199.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:39.915Z,1509671199.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:39.935Z,1509671199.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:40.314Z,1509671200.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:40.378Z,1509671200.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:40.720Z,1509671200.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:40.734Z,1509671200.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:41.120Z,1509671201.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:41.135Z,1509671201.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:41.517Z,1509671201.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:41.586Z,1509671201.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:41.920Z,1509671201.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:41.935Z,1509671201.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:42.321Z,1509671202.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:42.378Z,1509671202.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:42.718Z,1509671202.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:42.736Z,1509671202.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:43.106Z,1509671203.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:43.155Z,1509671203.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:43.521Z,1509671203.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:43.536Z,1509671203.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:43.918Z,1509671203.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:43.974Z,1509671203.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:44.320Z,1509671204.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:44.335Z,1509671204.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:44.707Z,1509671204.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:44.732Z,1509671204.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:45.118Z,1509671205.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:45.137Z,1509671205.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:45.520Z,1509671205.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:45.535Z,1509671205.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:45.921Z,1509671205.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:45.936Z,1509671205.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:46.321Z,1509671206.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:46.336Z,1509671206.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:46.721Z,1509671206.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:46.735Z,1509671206.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:47.107Z,1509671207.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:47.132Z,1509671207.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:47.518Z,1509671207.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:47.537Z,1509671207.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:47.906Z,1509671207.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:47.930Z,1509671207.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:48.307Z,1509671208.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:48.332Z,1509671208.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:48.718Z,1509671208.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:48.737Z,1509671208.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:49.107Z,1509671209.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:49.131Z,1509671209.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:49.507Z,1509671209.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:49.532Z,1509671209.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:49.918Z,1509671209.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:49.937Z,1509671209.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:50.320Z,1509671210.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:50.335Z,1509671210.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:50.721Z,1509671210.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:50.736Z,1509671210.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:51.114Z,1509671211.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:51.135Z,1509671211.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:51.521Z,1509671211.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:51.535Z,1509671211.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:51.910Z,1509671211.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:51.935Z,1509671211.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:52.311Z,1509671212.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:52.344Z,1509671212.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:52.714Z,1509671212.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:52.738Z,1509671212.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:53.114Z,1509671213.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:53.138Z,1509671213.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:53.512Z,1509671213.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:53.537Z,1509671213.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:53.914Z,1509671213.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:53.939Z,1509671213.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:54.314Z,1509671214.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:54.339Z,1509671214.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:54.711Z,1509671214.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:54.763Z,1509671214.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:55.114Z,1509671215.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:55.138Z,1509671215.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:55.507Z,1509671215.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:55.534Z,1509671215.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:55.912Z,1509671215.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:55.967Z,1509671215.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:56.312Z,1509671216.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:56.326Z,1509671216.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:56.712Z,1509671216.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:56.727Z,1509671216.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:57.115Z,1509671217.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:57.166Z,1509671217.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:57.518Z,1509671217.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:57.547Z,1509671217.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:57.911Z,1509671217.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:57.966Z,1509671217.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:58.314Z,1509671218.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:58.367Z,1509671218.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:58.718Z,1509671218.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:58.747Z,1509671218.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:59.111Z,1509671219.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:59.127Z,1509671219.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:59.510Z,1509671219.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:59.547Z,1509671219.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:06:59.918Z,1509671219.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:06:59.948Z,1509671219.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:00.311Z,1509671220.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:00.326Z,1509671220.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:00.718Z,1509671220.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:00.747Z,1509671220.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:01.111Z,1509671221.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:01.125Z,1509671221.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:01.508Z,1509671221.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:01.523Z,1509671221.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:01.917Z,1509671221.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:01.940Z,1509671221.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:02.312Z,1509671222.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:02.326Z,1509671222.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:02.711Z,1509671222.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:02.727Z,1509671222.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:03.110Z,1509671223.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:03.126Z,1509671223.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:03.511Z,1509671223.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:03.526Z,1509671223.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:03.912Z,1509671223.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:03.928Z,1509671223.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:04.312Z,1509671224.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:04.327Z,1509671224.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:04.712Z,1509671224.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:04.727Z,1509671224.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:05.115Z,1509671225.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:05.147Z,1509671225.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:05.515Z,1509671225.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:05.529Z,1509671225.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:05.911Z,1509671225.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:05.927Z,1509671225.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:06.319Z,1509671226.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:06.354Z,1509671226.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:06.714Z,1509671226.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:06.729Z,1509671226.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:07.114Z,1509671227.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:07.129Z,1509671227.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:07.149Z,1509671227.149 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T01:07:07.149Z,1509671227.149 [Default:CheckIn:C.Wait] Stopped
2017-11-03T01:07:07.149Z,1509671227.149 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T01:07:07.149Z,1509671227.149 [Default:CheckIn:D] Running Loop=1
2017-11-03T01:07:07.511Z,1509671227.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:07.527Z,1509671227.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:07.531Z,1509671227.531 [Default:CheckIn:D] Stopped
2017-11-03T01:07:07.531Z,1509671227.531 [Default:CheckIn:E] Running Loop=1
2017-11-03T01:07:07.918Z,1509671227.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:07.933Z,1509671227.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:07.961Z,1509671227.961 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.999410 min 
2017-11-03T01:07:07.961Z,1509671227.961 [Default:CheckIn:E] Stopped
2017-11-03T01:07:07.961Z,1509671227.961 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T01:07:07.961Z,1509671227.961 [Default:CheckIn] Stopped
2017-11-03T01:07:07.961Z,1509671227.961 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T01:07:07.961Z,1509671227.961 [Default:CheckIn](INFO): Running loop #6
2017-11-03T01:07:07.961Z,1509671227.961 [Default:CheckIn] Running Loop=6
2017-11-03T01:07:07.962Z,1509671227.962 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T01:07:07.962Z,1509671227.962 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T01:07:11.024Z,1509671231.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:11.069Z,1509671231.069 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T01:07:11.069Z,1509671231.069 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:07:11.069Z,1509671231.069 [BPC1](ERROR): Data Fault
2017-11-03T01:07:11.077Z,1509671231.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:11.191Z,1509671231.191 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:07:11.228Z,1509671231.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:11.275Z,1509671231.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:11.365Z,1509671231.365 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T01:07:11.365Z,1509671231.365 [NAL9602] No Fault, FailCount= 5
2017-11-03T01:07:11.618Z,1509671231.618 [NAL9602](INFO): Powering up NAL9602
2017-11-03T01:07:11.635Z,1509671231.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:11.682Z,1509671231.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:12.031Z,1509671232.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:12.062Z,1509671232.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:12.149Z,1509671232.149 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:07:12.149Z,1509671232.149 [BPC1] No Fault, FailCount= 1
2017-11-03T01:07:12.425Z,1509671232.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:12.515Z,1509671232.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:12.830Z,1509671232.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:12.862Z,1509671232.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:13.223Z,1509671233.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:13.283Z,1509671233.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:13.624Z,1509671233.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:13.666Z,1509671233.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:14.027Z,1509671234.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:14.065Z,1509671234.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:14.432Z,1509671234.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:14.466Z,1509671234.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:14.828Z,1509671234.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:14.870Z,1509671234.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:15.230Z,1509671235.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:15.271Z,1509671235.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:15.624Z,1509671235.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:15.642Z,1509671235.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:16.032Z,1509671236.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:16.067Z,1509671236.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:16.431Z,1509671236.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:16.466Z,1509671236.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:16.831Z,1509671236.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:16.872Z,1509671236.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:17.223Z,1509671237.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:17.243Z,1509671237.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:17.633Z,1509671237.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:17.669Z,1509671237.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:18.023Z,1509671238.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:18.047Z,1509671238.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:18.426Z,1509671238.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:18.442Z,1509671238.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:18.834Z,1509671238.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:18.874Z,1509671238.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:19.227Z,1509671239.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:19.245Z,1509671239.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:19.626Z,1509671239.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:19.671Z,1509671239.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:20.031Z,1509671240.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:20.046Z,1509671240.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:20.426Z,1509671240.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:20.446Z,1509671240.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:20.828Z,1509671240.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:20.846Z,1509671240.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:21.226Z,1509671241.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:21.272Z,1509671241.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:21.626Z,1509671241.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:21.641Z,1509671241.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:22.027Z,1509671242.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:22.046Z,1509671242.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:22.444Z,1509671242.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:22.471Z,1509671242.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:22.810Z,1509671242.810 [NAL9602](INFO): NAL9602 initialized
2017-11-03T01:07:22.827Z,1509671242.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:22.875Z,1509671242.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:23.227Z,1509671243.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:23.242Z,1509671243.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:23.643Z,1509671243.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:23.672Z,1509671243.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:24.043Z,1509671244.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:24.071Z,1509671244.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:24.441Z,1509671244.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:24.499Z,1509671244.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:24.832Z,1509671244.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:24.848Z,1509671244.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:25.227Z,1509671245.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:25.289Z,1509671245.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:25.642Z,1509671245.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:25.658Z,1509671245.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:26.034Z,1509671246.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:26.083Z,1509671246.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:26.449Z,1509671246.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:26.466Z,1509671246.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:26.849Z,1509671246.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:26.895Z,1509671246.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:27.252Z,1509671247.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:27.299Z,1509671247.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:27.632Z,1509671247.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:27.669Z,1509671247.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:28.024Z,1509671248.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:28.053Z,1509671248.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:28.441Z,1509671248.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:28.457Z,1509671248.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:28.841Z,1509671248.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:28.863Z,1509671248.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:29.247Z,1509671249.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:29.284Z,1509671249.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:29.651Z,1509671249.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:29.670Z,1509671249.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:30.050Z,1509671250.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:30.071Z,1509671250.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:30.442Z,1509671250.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:30.457Z,1509671250.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:30.823Z,1509671250.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:30.863Z,1509671250.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:31.236Z,1509671251.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:31.255Z,1509671251.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:31.633Z,1509671251.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:31.652Z,1509671251.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:32.041Z,1509671252.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:32.062Z,1509671252.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:32.448Z,1509671252.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:32.490Z,1509671252.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:32.844Z,1509671252.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:32.863Z,1509671252.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:33.250Z,1509671253.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:33.265Z,1509671253.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:33.639Z,1509671253.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:33.655Z,1509671253.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:34.024Z,1509671254.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:34.069Z,1509671254.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:34.437Z,1509671254.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:34.459Z,1509671254.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:34.837Z,1509671254.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:34.855Z,1509671254.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:35.248Z,1509671255.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:35.263Z,1509671255.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:35.648Z,1509671255.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:35.688Z,1509671255.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:36.047Z,1509671256.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:36.066Z,1509671256.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:36.439Z,1509671256.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:36.456Z,1509671256.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:36.852Z,1509671256.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:36.867Z,1509671256.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:37.238Z,1509671257.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:37.271Z,1509671257.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:37.638Z,1509671257.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:37.702Z,1509671257.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:38.040Z,1509671258.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:38.062Z,1509671258.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:38.449Z,1509671258.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:38.464Z,1509671258.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:38.847Z,1509671258.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:38.884Z,1509671258.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:39.250Z,1509671259.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:39.306Z,1509671259.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:39.637Z,1509671259.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:39.655Z,1509671259.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:40.042Z,1509671260.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:40.095Z,1509671260.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:40.439Z,1509671260.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:40.467Z,1509671260.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:40.836Z,1509671260.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:40.894Z,1509671260.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:41.246Z,1509671261.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:41.298Z,1509671261.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:41.652Z,1509671261.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:41.670Z,1509671261.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:42.048Z,1509671262.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:42.084Z,1509671262.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:42.424Z,1509671262.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:42.460Z,1509671262.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:42.840Z,1509671262.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:42.857Z,1509671262.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:43.239Z,1509671263.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:43.254Z,1509671263.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:43.633Z,1509671263.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:43.669Z,1509671263.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:44.036Z,1509671264.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:44.059Z,1509671264.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:44.450Z,1509671264.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:44.471Z,1509671264.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:44.851Z,1509671264.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:44.867Z,1509671264.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:45.248Z,1509671265.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:45.287Z,1509671265.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:45.636Z,1509671265.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:45.671Z,1509671265.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:46.036Z,1509671266.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:46.054Z,1509671266.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:46.444Z,1509671266.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:46.459Z,1509671266.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:46.837Z,1509671266.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:46.871Z,1509671266.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:47.250Z,1509671267.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:47.267Z,1509671267.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:47.651Z,1509671267.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:47.671Z,1509671267.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:48.052Z,1509671268.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:48.067Z,1509671268.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:48.434Z,1509671268.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:48.471Z,1509671268.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:48.838Z,1509671268.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:48.859Z,1509671268.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:49.239Z,1509671269.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:49.257Z,1509671269.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:49.641Z,1509671269.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:49.656Z,1509671269.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:50.037Z,1509671270.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:50.067Z,1509671270.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:50.449Z,1509671270.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:50.467Z,1509671270.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:50.850Z,1509671270.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:50.866Z,1509671270.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:51.253Z,1509671271.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:51.270Z,1509671271.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:51.636Z,1509671271.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:51.706Z,1509671271.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:52.036Z,1509671272.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:52.056Z,1509671272.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:52.442Z,1509671272.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:52.459Z,1509671272.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:52.842Z,1509671272.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:52.863Z,1509671272.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:53.248Z,1509671273.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:53.314Z,1509671273.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:53.651Z,1509671273.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:53.659Z,1509671273.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:07:53.698Z,1509671273.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:54.047Z,1509671274.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:54.062Z,1509671274.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:54.440Z,1509671274.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:54.498Z,1509671274.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:54.837Z,1509671274.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:54.867Z,1509671274.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:55.233Z,1509671275.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:55.287Z,1509671275.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:55.639Z,1509671275.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:55.698Z,1509671275.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:56.039Z,1509671276.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:56.064Z,1509671276.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:56.445Z,1509671276.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:56.484Z,1509671276.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:56.850Z,1509671276.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:56.867Z,1509671276.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:57.252Z,1509671277.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:57.271Z,1509671277.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:57.642Z,1509671277.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:57.657Z,1509671277.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:58.038Z,1509671278.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:58.071Z,1509671278.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:58.437Z,1509671278.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:58.458Z,1509671278.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:58.838Z,1509671278.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:58.856Z,1509671278.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:59.252Z,1509671279.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:59.268Z,1509671279.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:07:59.648Z,1509671279.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:07:59.688Z,1509671279.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:00.048Z,1509671280.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:00.066Z,1509671280.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:00.436Z,1509671280.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:00.454Z,1509671280.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:00.840Z,1509671280.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:00.862Z,1509671280.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:01.232Z,1509671281.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:01.306Z,1509671281.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:01.636Z,1509671281.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:01.656Z,1509671281.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:02.039Z,1509671282.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:02.056Z,1509671282.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:02.440Z,1509671282.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:02.460Z,1509671282.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:02.851Z,1509671282.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:02.893Z,1509671282.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:03.251Z,1509671283.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:03.259Z,1509671283.259 [PNI_TCM](ERROR): CRC does not match. Expected:0x52930 got:0x35435
2017-11-03T01:08:03.295Z,1509671283.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:03.640Z,1509671283.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:03.657Z,1509671283.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:04.040Z,1509671284.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:04.055Z,1509671284.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:04.438Z,1509671284.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:04.471Z,1509671284.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:04.827Z,1509671284.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:04.856Z,1509671284.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:05.251Z,1509671285.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:05.266Z,1509671285.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:05.652Z,1509671285.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:05.667Z,1509671285.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:06.045Z,1509671286.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:06.078Z,1509671286.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:06.438Z,1509671286.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:06.460Z,1509671286.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:06.828Z,1509671286.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:06.866Z,1509671286.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:07.240Z,1509671287.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:07.255Z,1509671287.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:07.638Z,1509671287.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:07.710Z,1509671287.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:08.039Z,1509671288.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:08.058Z,1509671288.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:11.161Z,1509671291.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:11.215Z,1509671291.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:11.350Z,1509671291.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:11.365Z,1509671291.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:11.746Z,1509671291.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:11.798Z,1509671291.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:12.123Z,1509671292.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:12.179Z,1509671292.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:12.525Z,1509671292.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:12.551Z,1509671292.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:12.925Z,1509671292.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:12.954Z,1509671292.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:13.341Z,1509671293.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:13.363Z,1509671293.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:13.748Z,1509671293.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:13.771Z,1509671293.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:14.143Z,1509671294.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:14.167Z,1509671294.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:14.521Z,1509671294.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:14.548Z,1509671294.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:14.927Z,1509671294.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:14.952Z,1509671294.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:15.325Z,1509671295.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:15.358Z,1509671295.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:15.722Z,1509671295.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:15.747Z,1509671295.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:16.126Z,1509671296.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:16.152Z,1509671296.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:16.545Z,1509671296.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:16.560Z,1509671296.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:16.949Z,1509671296.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:16.964Z,1509671296.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:17.343Z,1509671297.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:17.362Z,1509671297.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:17.725Z,1509671297.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:17.755Z,1509671297.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:18.117Z,1509671298.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:18.148Z,1509671298.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:18.527Z,1509671298.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:18.553Z,1509671298.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:18.925Z,1509671298.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:18.954Z,1509671298.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:19.345Z,1509671299.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:19.361Z,1509671299.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:19.744Z,1509671299.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:19.767Z,1509671299.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:20.146Z,1509671300.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:20.161Z,1509671300.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:20.527Z,1509671300.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:20.553Z,1509671300.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:20.925Z,1509671300.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:20.958Z,1509671300.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:21.327Z,1509671301.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:21.353Z,1509671301.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:21.728Z,1509671301.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:21.753Z,1509671301.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:22.125Z,1509671302.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:22.153Z,1509671302.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:22.546Z,1509671302.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:22.561Z,1509671302.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:22.949Z,1509671302.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:23.014Z,1509671303.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:23.345Z,1509671303.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:23.360Z,1509671303.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:23.725Z,1509671303.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:23.755Z,1509671303.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:24.127Z,1509671304.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:24.179Z,1509671304.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:24.528Z,1509671304.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:24.553Z,1509671304.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:24.925Z,1509671304.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:24.959Z,1509671304.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:25.345Z,1509671305.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:25.399Z,1509671305.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:25.745Z,1509671305.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:25.767Z,1509671305.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:26.146Z,1509671306.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:26.199Z,1509671306.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:26.527Z,1509671306.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:26.583Z,1509671306.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:26.925Z,1509671306.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:26.952Z,1509671306.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:27.325Z,1509671307.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:27.358Z,1509671307.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:27.728Z,1509671307.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:27.753Z,1509671307.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:28.127Z,1509671308.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:28.153Z,1509671308.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:28.546Z,1509671308.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:28.561Z,1509671308.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:28.949Z,1509671308.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:28.964Z,1509671308.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:29.345Z,1509671309.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:29.360Z,1509671309.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:29.725Z,1509671309.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:29.753Z,1509671309.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:30.121Z,1509671310.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:30.151Z,1509671310.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:30.526Z,1509671310.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:30.559Z,1509671310.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:30.925Z,1509671310.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:30.956Z,1509671310.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:31.337Z,1509671311.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:31.363Z,1509671311.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:31.750Z,1509671311.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:31.765Z,1509671311.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:32.137Z,1509671312.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:32.164Z,1509671312.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:32.528Z,1509671312.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:32.562Z,1509671312.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:32.927Z,1509671312.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:32.959Z,1509671312.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:33.325Z,1509671313.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:33.341Z,1509671313.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:33.726Z,1509671313.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:33.768Z,1509671313.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:34.127Z,1509671314.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:34.143Z,1509671314.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:34.538Z,1509671314.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:34.571Z,1509671314.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:34.938Z,1509671314.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:34.962Z,1509671314.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:35.342Z,1509671315.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:35.371Z,1509671315.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:35.725Z,1509671315.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:35.740Z,1509671315.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:36.129Z,1509671316.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:36.144Z,1509671316.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:36.528Z,1509671316.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:36.543Z,1509671316.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:36.924Z,1509671316.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:36.939Z,1509671316.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:37.338Z,1509671317.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:37.391Z,1509671317.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:37.745Z,1509671317.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:37.771Z,1509671317.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:38.137Z,1509671318.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:38.169Z,1509671318.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:38.525Z,1509671318.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:38.540Z,1509671318.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:38.924Z,1509671318.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:38.994Z,1509671318.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:39.330Z,1509671319.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:39.358Z,1509671319.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:39.730Z,1509671319.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:39.790Z,1509671319.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:40.134Z,1509671320.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:40.150Z,1509671320.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:40.538Z,1509671320.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:40.590Z,1509671320.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:40.941Z,1509671320.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:40.999Z,1509671320.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:41.337Z,1509671321.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:41.355Z,1509671321.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:41.735Z,1509671321.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:41.751Z,1509671321.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:42.135Z,1509671322.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:42.151Z,1509671322.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:42.533Z,1509671322.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:42.547Z,1509671322.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:42.937Z,1509671322.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:42.951Z,1509671322.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:43.338Z,1509671323.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:43.353Z,1509671323.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:43.741Z,1509671323.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:43.756Z,1509671323.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:44.138Z,1509671324.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:44.159Z,1509671324.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:44.529Z,1509671324.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:44.545Z,1509671324.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:44.928Z,1509671324.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:44.944Z,1509671324.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:45.332Z,1509671325.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:45.348Z,1509671325.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:45.735Z,1509671325.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:45.755Z,1509671325.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:46.134Z,1509671326.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:46.149Z,1509671326.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:46.537Z,1509671326.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:46.553Z,1509671326.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:46.941Z,1509671326.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:46.957Z,1509671326.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:47.337Z,1509671327.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:47.352Z,1509671327.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:47.733Z,1509671327.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:47.748Z,1509671327.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:48.135Z,1509671328.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:48.150Z,1509671328.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:48.534Z,1509671328.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:48.549Z,1509671328.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:48.933Z,1509671328.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:48.955Z,1509671328.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:49.338Z,1509671329.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:49.353Z,1509671329.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:49.741Z,1509671329.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:49.763Z,1509671329.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:50.138Z,1509671330.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:50.153Z,1509671330.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:50.535Z,1509671330.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:50.550Z,1509671330.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:50.935Z,1509671330.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:50.955Z,1509671330.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:51.333Z,1509671331.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:51.390Z,1509671331.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:51.736Z,1509671331.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:51.751Z,1509671331.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:52.134Z,1509671332.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:52.149Z,1509671332.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:52.545Z,1509671332.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:52.560Z,1509671332.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:52.944Z,1509671332.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:52.959Z,1509671332.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:53.341Z,1509671333.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:53.402Z,1509671333.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:53.727Z,1509671333.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:53.759Z,1509671333.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:54.121Z,1509671334.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:54.186Z,1509671334.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:54.521Z,1509671334.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:54.548Z,1509671334.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:54.927Z,1509671334.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:54.994Z,1509671334.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:55.345Z,1509671335.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:55.399Z,1509671335.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:55.749Z,1509671335.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:55.764Z,1509671335.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:56.146Z,1509671336.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:56.161Z,1509671336.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:56.527Z,1509671336.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:56.553Z,1509671336.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:56.926Z,1509671336.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:56.952Z,1509671336.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:57.327Z,1509671337.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:57.353Z,1509671337.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:57.728Z,1509671337.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:57.753Z,1509671337.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:58.120Z,1509671338.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:58.148Z,1509671338.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:58.546Z,1509671338.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:58.561Z,1509671338.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:58.938Z,1509671338.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:58.959Z,1509671338.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:59.341Z,1509671339.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:59.356Z,1509671339.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:59.725Z,1509671339.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:08:59.758Z,1509671339.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:59.758Z,1509671339.758 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2017-11-03T01:08:59.758Z,1509671339.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:08:59.760Z,1509671339.760 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:59.760Z,1509671339.760 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2017-11-03T01:08:59.760Z,1509671339.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:08:59.762Z,1509671339.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:08:59.762Z,1509671339.762 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-11-03T01:08:59.762Z,1509671339.762 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:08:59.845Z,1509671339.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:08:59.845Z,1509671339.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:08:59.845Z,1509671339.845 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:09:00.119Z,1509671340.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:00.240Z,1509671340.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:09:00.241Z,1509671340.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2017-11-03T01:09:00.241Z,1509671340.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:09:00.241Z,1509671340.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2017-11-03T01:09:00.242Z,1509671340.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:09:00.242Z,1509671340.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-11-03T01:09:00.520Z,1509671340.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:00.546Z,1509671340.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:09:00.546Z,1509671340.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:09:00.546Z,1509671340.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:09:00.547Z,1509671340.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:09:00.547Z,1509671340.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:09:00.547Z,1509671340.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:09:00.548Z,1509671340.548 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:09:00.552Z,1509671340.552 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:09:00.553Z,1509671340.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:09:00.927Z,1509671340.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:00.962Z,1509671340.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:09:00.962Z,1509671340.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:01.334Z,1509671341.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:01.359Z,1509671341.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:09:01.360Z,1509671341.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:01.750Z,1509671341.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:01.765Z,1509671341.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:09:01.766Z,1509671341.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:02.137Z,1509671342.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:02.163Z,1509671342.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:09:02.164Z,1509671342.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:02.527Z,1509671342.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:02.558Z,1509671342.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:09:02.559Z,1509671342.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:02.924Z,1509671342.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:02.939Z,1509671342.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:09:02.940Z,1509671342.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:03.325Z,1509671343.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:03.362Z,1509671343.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:09:03.363Z,1509671343.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:03.725Z,1509671343.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:03.740Z,1509671343.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:09:03.741Z,1509671343.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:04.123Z,1509671344.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:04.138Z,1509671344.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:09:04.139Z,1509671344.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:04.538Z,1509671344.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:04.570Z,1509671344.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:09:04.571Z,1509671344.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:04.937Z,1509671344.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:04.969Z,1509671344.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:09:04.970Z,1509671344.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:05.341Z,1509671345.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:05.366Z,1509671345.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:09:05.367Z,1509671345.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:05.725Z,1509671345.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:05.739Z,1509671345.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:09:05.740Z,1509671345.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:06.124Z,1509671346.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:06.186Z,1509671346.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:09:06.187Z,1509671346.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:06.532Z,1509671346.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:06.546Z,1509671346.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:09:06.547Z,1509671346.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:06.929Z,1509671346.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:06.943Z,1509671346.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:09:06.944Z,1509671346.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:07.341Z,1509671347.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:07.414Z,1509671347.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T01:09:07.415Z,1509671347.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:07.741Z,1509671347.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:07.771Z,1509671347.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:09:07.772Z,1509671347.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:08.142Z,1509671348.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:08.190Z,1509671348.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:09:08.191Z,1509671348.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:11.214Z,1509671351.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:11.231Z,1509671351.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T01:09:11.233Z,1509671351.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:11.349Z,1509671351.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:11.402Z,1509671351.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:09:11.403Z,1509671351.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:11.770Z,1509671351.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:11.826Z,1509671351.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T01:09:11.827Z,1509671351.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:12.169Z,1509671352.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:12.184Z,1509671352.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:09:12.185Z,1509671352.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:12.569Z,1509671352.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:12.584Z,1509671352.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:09:12.585Z,1509671352.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:12.947Z,1509671352.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:12.983Z,1509671352.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:09:12.984Z,1509671352.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:13.345Z,1509671353.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:13.376Z,1509671353.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:09:13.377Z,1509671353.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:13.752Z,1509671353.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:13.782Z,1509671353.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:09:13.783Z,1509671353.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:14.149Z,1509671354.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:14.182Z,1509671354.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:09:14.183Z,1509671354.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:14.558Z,1509671354.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:14.590Z,1509671354.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:09:14.591Z,1509671354.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:14.962Z,1509671354.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:14.987Z,1509671354.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:09:14.988Z,1509671354.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:15.362Z,1509671355.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:15.390Z,1509671355.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:09:15.391Z,1509671355.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:15.748Z,1509671355.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:15.763Z,1509671355.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:09:15.764Z,1509671355.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:16.148Z,1509671356.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:16.163Z,1509671356.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:09:16.165Z,1509671356.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:16.549Z,1509671356.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:16.563Z,1509671356.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:09:16.565Z,1509671356.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:16.948Z,1509671356.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:16.963Z,1509671356.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:09:16.964Z,1509671356.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:17.361Z,1509671357.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:17.388Z,1509671357.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:09:17.393Z,1509671357.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:17.769Z,1509671357.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:17.798Z,1509671357.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:09:17.799Z,1509671357.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:18.161Z,1509671358.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:18.193Z,1509671358.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:09:18.194Z,1509671358.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:18.550Z,1509671358.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:18.565Z,1509671358.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:09:18.566Z,1509671358.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:18.949Z,1509671358.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:18.963Z,1509671358.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T01:09:18.965Z,1509671358.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:19.351Z,1509671359.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:19.366Z,1509671359.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:09:19.367Z,1509671359.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:19.750Z,1509671359.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:19.765Z,1509671359.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:20.149Z,1509671360.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:20.164Z,1509671360.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:20.562Z,1509671360.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:20.592Z,1509671360.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:20.962Z,1509671360.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:20.993Z,1509671360.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:21.366Z,1509671361.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:21.391Z,1509671361.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:21.749Z,1509671361.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:21.764Z,1509671361.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:22.148Z,1509671362.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:22.164Z,1509671362.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:22.555Z,1509671362.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:22.599Z,1509671362.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:22.952Z,1509671362.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:22.967Z,1509671362.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:23.365Z,1509671363.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:23.395Z,1509671363.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:23.765Z,1509671363.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:23.819Z,1509671363.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:24.170Z,1509671364.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:24.199Z,1509671364.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:24.552Z,1509671364.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:24.567Z,1509671364.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:24.956Z,1509671364.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:24.996Z,1509671364.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:25.357Z,1509671365.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:25.371Z,1509671365.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:25.757Z,1509671365.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:25.811Z,1509671365.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:26.157Z,1509671366.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:26.196Z,1509671366.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:26.558Z,1509671366.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:26.573Z,1509671366.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:26.970Z,1509671366.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:26.999Z,1509671366.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:27.362Z,1509671367.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:27.377Z,1509671367.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:27.755Z,1509671367.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:27.779Z,1509671367.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:28.154Z,1509671368.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:28.170Z,1509671368.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:28.556Z,1509671368.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:28.571Z,1509671368.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:28.952Z,1509671368.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:28.967Z,1509671368.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:29.357Z,1509671369.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:29.372Z,1509671369.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:29.761Z,1509671369.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:29.800Z,1509671369.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:30.157Z,1509671370.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:30.173Z,1509671370.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:30.555Z,1509671370.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:30.570Z,1509671370.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:30.955Z,1509671370.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:30.970Z,1509671370.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:31.352Z,1509671371.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:31.367Z,1509671371.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:31.756Z,1509671371.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:31.771Z,1509671371.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:32.154Z,1509671372.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:32.178Z,1509671372.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:32.569Z,1509671372.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:32.604Z,1509671372.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:32.961Z,1509671372.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:32.976Z,1509671372.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:33.361Z,1509671373.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:33.376Z,1509671373.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:33.755Z,1509671373.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:33.771Z,1509671373.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:34.155Z,1509671374.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:34.171Z,1509671374.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:34.557Z,1509671374.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:34.571Z,1509671374.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:34.955Z,1509671374.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:34.971Z,1509671374.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:35.361Z,1509671375.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:35.377Z,1509671375.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:35.761Z,1509671375.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:35.775Z,1509671375.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:36.162Z,1509671376.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:36.177Z,1509671376.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:36.556Z,1509671376.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:36.618Z,1509671376.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:36.957Z,1509671376.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:36.971Z,1509671376.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:37.356Z,1509671377.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:37.371Z,1509671377.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:37.759Z,1509671377.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:37.779Z,1509671377.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:38.156Z,1509671378.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:38.191Z,1509671378.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:38.568Z,1509671378.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:38.591Z,1509671378.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:38.967Z,1509671378.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:38.983Z,1509671378.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:39.369Z,1509671379.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:39.415Z,1509671379.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:39.756Z,1509671379.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:39.771Z,1509671379.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:40.152Z,1509671380.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:40.204Z,1509671380.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:40.558Z,1509671380.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:40.596Z,1509671380.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:40.956Z,1509671380.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:40.971Z,1509671380.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:41.369Z,1509671381.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:41.384Z,1509671381.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:41.769Z,1509671381.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:41.791Z,1509671381.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:42.168Z,1509671382.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:42.183Z,1509671382.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:42.552Z,1509671382.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:42.576Z,1509671382.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:42.945Z,1509671382.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:42.970Z,1509671382.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:43.358Z,1509671383.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:43.373Z,1509671383.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:43.759Z,1509671383.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:43.774Z,1509671383.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:44.158Z,1509671384.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:44.178Z,1509671384.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:44.569Z,1509671384.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:44.584Z,1509671384.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:44.964Z,1509671384.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:44.979Z,1509671384.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:45.370Z,1509671385.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:45.384Z,1509671385.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:45.757Z,1509671385.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:45.772Z,1509671385.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:46.144Z,1509671386.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:46.167Z,1509671386.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:46.549Z,1509671386.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:46.574Z,1509671386.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:46.948Z,1509671386.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:46.974Z,1509671386.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:47.369Z,1509671387.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:47.384Z,1509671387.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:47.770Z,1509671387.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:47.791Z,1509671387.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:48.169Z,1509671388.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:48.184Z,1509671388.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:48.550Z,1509671388.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:48.577Z,1509671388.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:48.948Z,1509671388.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:48.975Z,1509671388.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:49.348Z,1509671389.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:49.374Z,1509671389.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:49.749Z,1509671389.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:49.774Z,1509671389.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:50.148Z,1509671390.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:50.182Z,1509671390.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:50.570Z,1509671390.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:50.585Z,1509671390.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:50.969Z,1509671390.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:50.984Z,1509671390.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:51.370Z,1509671391.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:51.430Z,1509671391.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:51.749Z,1509671391.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:51.775Z,1509671391.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:52.145Z,1509671392.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:52.176Z,1509671392.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:52.546Z,1509671392.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:52.603Z,1509671392.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:52.949Z,1509671392.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:52.984Z,1509671392.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:53.358Z,1509671393.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:53.389Z,1509671393.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:53.765Z,1509671393.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:53.829Z,1509671393.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:54.162Z,1509671394.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:54.187Z,1509671394.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:54.547Z,1509671394.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:54.602Z,1509671394.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:54.948Z,1509671394.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:54.999Z,1509671394.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:55.349Z,1509671395.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:55.363Z,1509671395.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:55.749Z,1509671395.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:55.763Z,1509671395.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:56.154Z,1509671396.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:56.181Z,1509671396.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:56.565Z,1509671396.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:56.587Z,1509671396.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:56.961Z,1509671396.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:56.987Z,1509671396.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:57.357Z,1509671397.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:57.388Z,1509671397.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:57.749Z,1509671397.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:57.764Z,1509671397.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:58.147Z,1509671398.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:58.162Z,1509671398.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:58.556Z,1509671398.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:58.582Z,1509671398.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:58.949Z,1509671398.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:58.964Z,1509671398.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:59.361Z,1509671399.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:59.385Z,1509671399.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:09:59.765Z,1509671399.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:09:59.788Z,1509671399.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:00.162Z,1509671400.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:00.191Z,1509671400.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:00.552Z,1509671400.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:00.567Z,1509671400.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:00.948Z,1509671400.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:00.966Z,1509671400.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:01.348Z,1509671401.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:01.364Z,1509671401.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:01.754Z,1509671401.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:01.777Z,1509671401.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:02.155Z,1509671402.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:02.191Z,1509671402.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:02.562Z,1509671402.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:02.586Z,1509671402.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:02.961Z,1509671402.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:02.989Z,1509671402.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:03.361Z,1509671403.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:03.383Z,1509671403.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:03.749Z,1509671403.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:03.764Z,1509671403.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:04.149Z,1509671404.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:04.164Z,1509671404.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:04.550Z,1509671404.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:04.565Z,1509671404.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:04.949Z,1509671404.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:04.964Z,1509671404.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:05.362Z,1509671405.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:05.386Z,1509671405.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:05.762Z,1509671405.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:05.807Z,1509671405.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:06.162Z,1509671406.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:06.191Z,1509671406.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:06.548Z,1509671406.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:06.564Z,1509671406.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:06.948Z,1509671406.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:07.011Z,1509671407.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:07.348Z,1509671407.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:07.363Z,1509671407.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:07.749Z,1509671407.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:07.765Z,1509671407.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:08.151Z,1509671408.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:08.193Z,1509671408.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:11.255Z,1509671411.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:11.271Z,1509671411.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:11.436Z,1509671411.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:11.495Z,1509671411.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:11.834Z,1509671411.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:11.888Z,1509671411.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:12.219Z,1509671412.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:12.245Z,1509671412.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:12.613Z,1509671412.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:12.641Z,1509671412.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:13.012Z,1509671413.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:13.046Z,1509671413.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:13.421Z,1509671413.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:13.455Z,1509671413.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:13.833Z,1509671413.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:13.849Z,1509671413.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:14.234Z,1509671414.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:14.251Z,1509671414.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:14.609Z,1509671414.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:14.623Z,1509671414.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:15.008Z,1509671415.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:15.023Z,1509671415.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:15.413Z,1509671415.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:15.427Z,1509671415.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:15.805Z,1509671415.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:15.820Z,1509671415.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:16.225Z,1509671416.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:16.252Z,1509671416.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:16.625Z,1509671416.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:16.651Z,1509671416.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:17.025Z,1509671417.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:17.055Z,1509671417.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:17.409Z,1509671417.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:17.424Z,1509671417.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:17.815Z,1509671417.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:17.851Z,1509671417.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:18.221Z,1509671418.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:18.247Z,1509671418.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:18.625Z,1509671418.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:18.655Z,1509671418.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:19.025Z,1509671419.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:19.050Z,1509671419.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:19.413Z,1509671419.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:19.428Z,1509671419.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:19.822Z,1509671419.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:19.857Z,1509671419.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:20.225Z,1509671420.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:20.255Z,1509671420.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:20.625Z,1509671420.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:20.657Z,1509671420.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:21.025Z,1509671421.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:21.056Z,1509671421.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:21.413Z,1509671421.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:21.434Z,1509671421.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:21.812Z,1509671421.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:21.827Z,1509671421.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:22.225Z,1509671422.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:22.256Z,1509671422.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:22.633Z,1509671422.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:22.675Z,1509671422.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:23.025Z,1509671423.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:23.056Z,1509671423.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:23.412Z,1509671423.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:23.427Z,1509671423.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:23.818Z,1509671423.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:23.875Z,1509671423.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:24.225Z,1509671424.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:24.257Z,1509671424.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:24.629Z,1509671424.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:24.675Z,1509671424.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:25.029Z,1509671425.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:25.059Z,1509671425.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:25.412Z,1509671425.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:25.467Z,1509671425.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:25.823Z,1509671425.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:25.838Z,1509671425.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:26.229Z,1509671426.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:26.271Z,1509671426.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:26.625Z,1509671426.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:26.660Z,1509671426.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:27.029Z,1509671427.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:27.060Z,1509671427.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:27.416Z,1509671427.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:27.431Z,1509671427.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:27.815Z,1509671427.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:27.831Z,1509671427.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:28.229Z,1509671428.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:28.260Z,1509671428.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:28.629Z,1509671428.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:28.658Z,1509671428.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:29.022Z,1509671429.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:29.037Z,1509671429.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:29.420Z,1509671429.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:29.435Z,1509671429.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:29.815Z,1509671429.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:29.835Z,1509671429.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:30.221Z,1509671430.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:30.237Z,1509671430.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:30.633Z,1509671430.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:30.656Z,1509671430.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:31.029Z,1509671431.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:31.060Z,1509671431.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:31.415Z,1509671431.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:31.430Z,1509671431.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:31.830Z,1509671431.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:31.859Z,1509671431.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:32.216Z,1509671432.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:32.231Z,1509671432.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:32.616Z,1509671432.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:32.638Z,1509671432.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:33.017Z,1509671433.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:33.032Z,1509671433.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:33.429Z,1509671433.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:33.461Z,1509671433.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:33.829Z,1509671433.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:33.860Z,1509671433.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:34.230Z,1509671434.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:34.260Z,1509671434.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:34.617Z,1509671434.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:34.632Z,1509671434.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:35.016Z,1509671435.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:35.031Z,1509671435.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:35.417Z,1509671435.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:35.432Z,1509671435.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:35.817Z,1509671435.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:35.832Z,1509671435.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:36.230Z,1509671436.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:36.258Z,1509671436.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:36.634Z,1509671436.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:36.655Z,1509671436.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:37.029Z,1509671437.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:37.079Z,1509671437.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:37.417Z,1509671437.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:37.432Z,1509671437.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:37.816Z,1509671437.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:37.831Z,1509671437.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:38.230Z,1509671438.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:38.284Z,1509671438.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:38.622Z,1509671438.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:38.637Z,1509671438.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:39.030Z,1509671439.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:39.079Z,1509671439.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:39.417Z,1509671439.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:39.432Z,1509671439.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:39.817Z,1509671439.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:39.863Z,1509671439.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:40.220Z,1509671440.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:40.279Z,1509671440.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:40.617Z,1509671440.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:40.632Z,1509671440.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:41.017Z,1509671441.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:41.032Z,1509671441.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:41.426Z,1509671441.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:41.453Z,1509671441.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:41.829Z,1509671441.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:41.861Z,1509671441.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:42.229Z,1509671442.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:42.258Z,1509671442.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:42.617Z,1509671442.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:42.632Z,1509671442.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:43.015Z,1509671443.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:43.034Z,1509671443.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:43.417Z,1509671443.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:43.433Z,1509671443.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:43.846Z,1509671443.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:43.861Z,1509671443.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:44.233Z,1509671444.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:44.257Z,1509671444.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:44.630Z,1509671444.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:44.659Z,1509671444.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:45.030Z,1509671445.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:45.058Z,1509671445.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:45.417Z,1509671445.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:45.478Z,1509671445.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:45.816Z,1509671445.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:45.832Z,1509671445.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:46.221Z,1509671446.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:46.237Z,1509671446.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:46.629Z,1509671446.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:46.664Z,1509671446.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:47.022Z,1509671447.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:47.038Z,1509671447.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:47.416Z,1509671447.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:47.431Z,1509671447.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:47.816Z,1509671447.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:47.831Z,1509671447.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:48.229Z,1509671448.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:48.262Z,1509671448.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:48.621Z,1509671448.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:48.637Z,1509671448.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:49.033Z,1509671449.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:49.063Z,1509671449.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:49.421Z,1509671449.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:49.436Z,1509671449.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:49.821Z,1509671449.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:49.836Z,1509671449.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:50.221Z,1509671450.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:50.236Z,1509671450.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:50.611Z,1509671450.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:50.653Z,1509671450.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:51.020Z,1509671451.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:51.035Z,1509671451.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:51.434Z,1509671451.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:51.462Z,1509671451.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:51.858Z,1509671451.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:51.881Z,1509671451.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:52.269Z,1509671452.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:52.331Z,1509671452.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:52.621Z,1509671452.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:52.645Z,1509671452.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:53.013Z,1509671453.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:53.090Z,1509671453.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:53.413Z,1509671453.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:53.453Z,1509671453.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:53.813Z,1509671453.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:53.887Z,1509671453.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:54.231Z,1509671454.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:54.263Z,1509671454.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:54.634Z,1509671454.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:54.699Z,1509671454.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:55.032Z,1509671455.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:55.051Z,1509671455.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:55.411Z,1509671455.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:55.427Z,1509671455.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:55.822Z,1509671455.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:55.848Z,1509671455.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:56.224Z,1509671456.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:56.263Z,1509671456.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:56.628Z,1509671456.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:56.661Z,1509671456.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:57.023Z,1509671457.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:57.063Z,1509671457.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:57.414Z,1509671457.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:57.457Z,1509671457.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:57.820Z,1509671457.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:57.860Z,1509671457.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:58.231Z,1509671458.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:58.266Z,1509671458.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:58.640Z,1509671458.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:58.671Z,1509671458.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:59.039Z,1509671459.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:59.107Z,1509671459.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:59.415Z,1509671459.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:59.439Z,1509671459.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:10:59.825Z,1509671459.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:10:59.873Z,1509671459.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:00.216Z,1509671460.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:00.266Z,1509671460.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:00.613Z,1509671460.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:00.647Z,1509671460.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:01.013Z,1509671461.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:01.059Z,1509671461.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:01.431Z,1509671461.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:01.459Z,1509671461.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:01.842Z,1509671461.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:01.865Z,1509671461.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:02.254Z,1509671462.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:02.277Z,1509671462.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:02.637Z,1509671462.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:02.652Z,1509671462.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:03.011Z,1509671463.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:03.047Z,1509671463.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:03.416Z,1509671463.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:03.447Z,1509671463.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:03.823Z,1509671463.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:03.855Z,1509671463.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:04.229Z,1509671464.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:04.253Z,1509671464.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:04.630Z,1509671464.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:04.654Z,1509671464.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:05.030Z,1509671465.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:05.053Z,1509671465.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:05.418Z,1509671465.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:05.455Z,1509671465.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:05.817Z,1509671465.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:05.832Z,1509671465.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:06.219Z,1509671466.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:06.276Z,1509671466.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:06.619Z,1509671466.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:06.667Z,1509671466.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:07.019Z,1509671467.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:07.039Z,1509671467.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:07.428Z,1509671467.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:07.475Z,1509671467.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:07.829Z,1509671467.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:07.844Z,1509671467.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:08.230Z,1509671468.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:08.275Z,1509671468.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:11.391Z,1509671471.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:11.466Z,1509671471.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:11.591Z,1509671471.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:11.630Z,1509671471.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:12.005Z,1509671472.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:12.021Z,1509671472.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:12.414Z,1509671472.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:12.429Z,1509671472.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:12.805Z,1509671472.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:12.820Z,1509671472.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:13.195Z,1509671473.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:13.215Z,1509671473.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:13.595Z,1509671473.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:13.610Z,1509671473.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:14.006Z,1509671474.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:14.022Z,1509671474.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:14.405Z,1509671474.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:14.421Z,1509671474.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:14.818Z,1509671474.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:14.839Z,1509671474.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:15.202Z,1509671475.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:15.223Z,1509671475.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:15.599Z,1509671475.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:15.615Z,1509671475.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:15.991Z,1509671475.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:16.006Z,1509671476.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:16.399Z,1509671476.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:16.414Z,1509671476.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:16.791Z,1509671476.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:16.807Z,1509671476.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:17.209Z,1509671477.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:17.242Z,1509671477.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:17.605Z,1509671477.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:17.637Z,1509671477.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:18.005Z,1509671478.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:18.036Z,1509671478.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:18.396Z,1509671478.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:18.411Z,1509671478.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:18.795Z,1509671478.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:18.810Z,1509671478.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:19.209Z,1509671479.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:19.247Z,1509671479.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:19.609Z,1509671479.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:19.638Z,1509671479.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:20.009Z,1509671480.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:20.037Z,1509671480.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:20.400Z,1509671480.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:20.415Z,1509671480.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:20.796Z,1509671480.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:20.811Z,1509671480.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:21.201Z,1509671481.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:21.217Z,1509671481.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:21.610Z,1509671481.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:21.645Z,1509671481.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:22.010Z,1509671482.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:22.046Z,1509671482.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:22.396Z,1509671482.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:22.404Z,1509671482.404 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T01:11:22.404Z,1509671482.404 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:11:22.405Z,1509671482.405 [BPC1](ERROR): Data Fault
2017-11-03T01:11:22.413Z,1509671482.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:22.505Z,1509671482.505 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:11:22.799Z,1509671482.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:22.819Z,1509671482.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:23.201Z,1509671483.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:23.217Z,1509671483.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:23.601Z,1509671483.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:23.616Z,1509671483.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:23.693Z,1509671483.693 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:11:23.693Z,1509671483.693 [BPC1] No Fault, FailCount= 1
2017-11-03T01:11:24.013Z,1509671484.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:24.095Z,1509671484.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:24.401Z,1509671484.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:24.416Z,1509671484.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:24.799Z,1509671484.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:24.814Z,1509671484.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:25.205Z,1509671485.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:25.255Z,1509671485.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:25.613Z,1509671485.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:25.647Z,1509671485.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:26.013Z,1509671486.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:26.044Z,1509671486.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:26.399Z,1509671486.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:26.418Z,1509671486.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:26.803Z,1509671486.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:26.818Z,1509671486.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:27.204Z,1509671487.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:27.219Z,1509671487.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:27.605Z,1509671487.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:27.620Z,1509671487.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:28.006Z,1509671488.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:28.021Z,1509671488.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:28.402Z,1509671488.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:28.417Z,1509671488.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:28.801Z,1509671488.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:28.816Z,1509671488.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:29.204Z,1509671489.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:29.219Z,1509671489.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:29.603Z,1509671489.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:29.619Z,1509671489.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:30.006Z,1509671490.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:30.021Z,1509671490.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:30.402Z,1509671490.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:30.419Z,1509671490.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:30.796Z,1509671490.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:30.811Z,1509671490.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:31.206Z,1509671491.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:31.221Z,1509671491.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:31.604Z,1509671491.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:31.619Z,1509671491.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:32.005Z,1509671492.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:32.020Z,1509671492.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:32.404Z,1509671492.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:32.427Z,1509671492.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:32.803Z,1509671492.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:32.818Z,1509671492.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:33.206Z,1509671493.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:33.221Z,1509671493.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:33.606Z,1509671493.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:33.621Z,1509671493.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:34.006Z,1509671494.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:34.021Z,1509671494.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:34.401Z,1509671494.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:34.417Z,1509671494.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:34.803Z,1509671494.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:34.819Z,1509671494.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:35.206Z,1509671495.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:35.222Z,1509671495.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:35.609Z,1509671495.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:35.625Z,1509671495.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:36.006Z,1509671496.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:36.021Z,1509671496.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:36.402Z,1509671496.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:36.419Z,1509671496.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:36.802Z,1509671496.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:36.870Z,1509671496.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:37.209Z,1509671497.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:37.231Z,1509671497.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:37.608Z,1509671497.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:37.666Z,1509671497.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:38.013Z,1509671498.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:38.028Z,1509671498.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:38.403Z,1509671498.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:38.459Z,1509671498.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:38.800Z,1509671498.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:38.815Z,1509671498.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:38.893Z,1509671498.893 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T01:11:39.204Z,1509671499.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:39.263Z,1509671499.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:39.612Z,1509671499.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:39.666Z,1509671499.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:40.012Z,1509671500.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:40.035Z,1509671500.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:40.129Z,1509671500.129 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T01:11:40.129Z,1509671500.129 [DropWeight] No Fault, FailCount= 1
2017-11-03T01:11:40.403Z,1509671500.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:40.418Z,1509671500.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:40.801Z,1509671500.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:40.816Z,1509671500.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:41.213Z,1509671501.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:41.228Z,1509671501.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:41.612Z,1509671501.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:41.630Z,1509671501.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:42.013Z,1509671502.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:42.028Z,1509671502.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:42.404Z,1509671502.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:42.427Z,1509671502.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:42.799Z,1509671502.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:42.815Z,1509671502.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:43.213Z,1509671503.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:43.231Z,1509671503.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:43.609Z,1509671503.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:43.631Z,1509671503.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:44.009Z,1509671504.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:44.027Z,1509671504.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:44.402Z,1509671504.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:44.432Z,1509671504.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:44.796Z,1509671504.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:44.821Z,1509671504.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:45.210Z,1509671505.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:45.225Z,1509671505.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:45.614Z,1509671505.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:45.628Z,1509671505.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:46.009Z,1509671506.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:46.025Z,1509671506.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:46.395Z,1509671506.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:46.422Z,1509671506.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:46.793Z,1509671506.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:46.827Z,1509671506.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:47.214Z,1509671507.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:47.229Z,1509671507.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:47.617Z,1509671507.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:47.632Z,1509671507.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:48.012Z,1509671508.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:48.030Z,1509671508.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:48.395Z,1509671508.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:48.421Z,1509671508.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:48.795Z,1509671508.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:48.820Z,1509671508.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:49.213Z,1509671509.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:49.228Z,1509671509.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:49.609Z,1509671509.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:49.625Z,1509671509.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:50.013Z,1509671510.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:50.028Z,1509671510.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:50.393Z,1509671510.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:50.420Z,1509671510.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:50.795Z,1509671510.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:50.838Z,1509671510.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:51.213Z,1509671511.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:51.232Z,1509671511.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:51.614Z,1509671511.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:51.647Z,1509671511.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:52.013Z,1509671512.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:52.074Z,1509671512.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:52.393Z,1509671512.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:52.408Z,1509671512.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:52.795Z,1509671512.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:52.809Z,1509671512.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:53.205Z,1509671513.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:53.273Z,1509671513.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:53.609Z,1509671513.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:53.633Z,1509671513.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:54.005Z,1509671514.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:54.073Z,1509671514.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:54.396Z,1509671514.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:54.455Z,1509671514.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:54.792Z,1509671514.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:54.807Z,1509671514.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:55.220Z,1509671515.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:55.235Z,1509671515.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:55.609Z,1509671515.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:55.642Z,1509671515.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:56.009Z,1509671516.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:56.043Z,1509671516.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:56.396Z,1509671516.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:56.411Z,1509671516.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:56.795Z,1509671516.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:56.831Z,1509671516.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:57.205Z,1509671517.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:57.238Z,1509671517.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:57.605Z,1509671517.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:57.641Z,1509671517.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:58.005Z,1509671518.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:58.037Z,1509671518.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:58.395Z,1509671518.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:58.410Z,1509671518.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:58.799Z,1509671518.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:58.814Z,1509671518.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:59.206Z,1509671519.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:59.238Z,1509671519.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:11:59.605Z,1509671519.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:11:59.636Z,1509671519.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:00.009Z,1509671520.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:00.024Z,1509671520.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:00.396Z,1509671520.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:00.411Z,1509671520.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:00.795Z,1509671520.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:00.810Z,1509671520.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:00.810Z,1509671520.810 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2017-11-03T01:12:00.810Z,1509671520.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:12:00.813Z,1509671520.813 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:00.813Z,1509671520.813 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2017-11-03T01:12:00.813Z,1509671520.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:12:00.815Z,1509671520.815 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:00.815Z,1509671520.815 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-11-03T01:12:00.815Z,1509671520.815 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:12:00.905Z,1509671520.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:12:00.905Z,1509671520.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:12:00.905Z,1509671520.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:12:01.204Z,1509671521.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:01.296Z,1509671521.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:12:01.296Z,1509671521.296 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2017-11-03T01:12:01.297Z,1509671521.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:12:01.297Z,1509671521.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2017-11-03T01:12:01.297Z,1509671521.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:12:01.298Z,1509671521.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-11-03T01:12:01.605Z,1509671521.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:01.619Z,1509671521.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:12:01.620Z,1509671521.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:12:01.620Z,1509671521.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:12:01.621Z,1509671521.621 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:12:01.621Z,1509671521.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:12:01.622Z,1509671521.622 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:12:01.622Z,1509671521.622 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:12:01.622Z,1509671521.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:12:01.623Z,1509671521.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:12:02.008Z,1509671522.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:02.023Z,1509671522.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:12:02.024Z,1509671522.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:02.402Z,1509671522.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:02.416Z,1509671522.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:12:02.417Z,1509671522.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:02.800Z,1509671522.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:02.818Z,1509671522.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:12:02.819Z,1509671522.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:03.208Z,1509671523.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:03.223Z,1509671523.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:12:03.224Z,1509671523.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:03.608Z,1509671523.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:03.630Z,1509671523.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:12:03.631Z,1509671523.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:04.008Z,1509671524.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:04.023Z,1509671524.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:12:04.024Z,1509671524.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:04.403Z,1509671524.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:04.418Z,1509671524.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:12:04.419Z,1509671524.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:04.801Z,1509671524.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:04.815Z,1509671524.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:12:04.816Z,1509671524.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:05.208Z,1509671525.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:05.222Z,1509671525.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:12:05.223Z,1509671525.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:05.609Z,1509671525.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:05.625Z,1509671525.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:12:05.627Z,1509671525.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:06.009Z,1509671526.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:06.030Z,1509671526.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:12:06.031Z,1509671526.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:06.401Z,1509671526.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:06.462Z,1509671526.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T01:12:06.463Z,1509671526.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:06.797Z,1509671526.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:06.859Z,1509671526.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:12:06.860Z,1509671526.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:07.212Z,1509671527.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:07.230Z,1509671527.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:12:07.231Z,1509671527.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:07.612Z,1509671527.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:07.634Z,1509671527.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:12:07.635Z,1509671527.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:08.013Z,1509671528.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:08.066Z,1509671528.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T01:12:08.067Z,1509671528.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:08.071Z,1509671528.071 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T01:07:07.0Z
2017-11-03T01:12:08.071Z,1509671528.071 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T01:12:08.071Z,1509671528.071 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T01:12:08.404Z,1509671528.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:08.419Z,1509671528.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:12:08.420Z,1509671528.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:11.589Z,1509671531.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:11.658Z,1509671531.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:12:11.659Z,1509671531.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:11.777Z,1509671531.777 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171103T001125/Courier0024.lzma
2017-11-03T01:12:11.825Z,1509671531.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:11.875Z,1509671531.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T01:12:11.876Z,1509671531.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:12.216Z,1509671532.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:12.238Z,1509671532.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T01:12:12.239Z,1509671532.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:12.574Z,1509671532.574 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0024.lzma.bak
2017-11-03T01:12:12.575Z,1509671532.575 [DataOverHttps](INFO): SBD MOMSN=5182354
2017-11-03T01:12:12.625Z,1509671532.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:12.639Z,1509671532.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T01:12:12.640Z,1509671532.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:13.192Z,1509671533.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:13.217Z,1509671533.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:12:13.218Z,1509671533.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:13.407Z,1509671533.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:13.425Z,1509671533.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T01:12:13.426Z,1509671533.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:16.539Z,1509671536.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:16.562Z,1509671536.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T01:12:16.563Z,1509671536.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:16.722Z,1509671536.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:16.762Z,1509671536.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:12:16.763Z,1509671536.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:17.116Z,1509671537.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:17.131Z,1509671537.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-03T01:12:17.132Z,1509671537.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:17.517Z,1509671537.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:17.532Z,1509671537.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-03T01:12:17.533Z,1509671537.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:17.901Z,1509671537.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:17.916Z,1509671537.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T01:12:17.917Z,1509671537.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:18.307Z,1509671538.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:18.322Z,1509671538.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T01:12:18.323Z,1509671538.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:21.417Z,1509671541.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:21.433Z,1509671541.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:21.529Z,1509671541.529 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20171103T001125/Express0025.lzma
2017-11-03T01:12:21.563Z,1509671541.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:21.601Z,1509671541.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:21.967Z,1509671541.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:21.991Z,1509671541.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:22.326Z,1509671542.326 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0025.lzma.bak
2017-11-03T01:12:22.327Z,1509671542.327 [DataOverHttps](INFO): SBD MOMSN=5182357
2017-11-03T01:12:22.377Z,1509671542.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:22.391Z,1509671542.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:22.965Z,1509671542.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:22.980Z,1509671542.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:22.983Z,1509671542.983 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T01:12:22.984Z,1509671542.984 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T01:12:22.984Z,1509671542.984 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T01:12:23.159Z,1509671543.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:23.206Z,1509671543.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:26.254Z,1509671546.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:26.352Z,1509671546.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:26.483Z,1509671546.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:26.518Z,1509671546.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:26.907Z,1509671546.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:26.924Z,1509671546.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:27.305Z,1509671547.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:27.343Z,1509671547.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:27.705Z,1509671547.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:27.722Z,1509671547.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:28.085Z,1509671548.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:28.143Z,1509671548.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:28.485Z,1509671548.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:28.536Z,1509671548.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:28.884Z,1509671548.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:28.914Z,1509671548.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:29.305Z,1509671549.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:29.321Z,1509671549.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:29.701Z,1509671549.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:29.730Z,1509671549.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:30.106Z,1509671550.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:30.121Z,1509671550.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:30.487Z,1509671550.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:30.513Z,1509671550.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:30.885Z,1509671550.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:30.913Z,1509671550.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:31.281Z,1509671551.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:31.315Z,1509671551.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:31.686Z,1509671551.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:31.713Z,1509671551.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:32.088Z,1509671552.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:32.114Z,1509671552.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:32.503Z,1509671552.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:32.518Z,1509671552.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:32.910Z,1509671552.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:32.927Z,1509671552.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:33.307Z,1509671553.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:33.322Z,1509671553.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:33.677Z,1509671553.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:33.705Z,1509671553.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:34.084Z,1509671554.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:34.115Z,1509671554.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:34.480Z,1509671554.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:34.494Z,1509671554.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:34.884Z,1509671554.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:34.923Z,1509671554.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:35.297Z,1509671555.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:35.331Z,1509671555.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:35.697Z,1509671555.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:35.727Z,1509671555.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:36.097Z,1509671556.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:36.131Z,1509671556.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:36.484Z,1509671556.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:36.499Z,1509671556.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:36.884Z,1509671556.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:36.899Z,1509671556.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:37.284Z,1509671557.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:37.299Z,1509671557.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:37.685Z,1509671557.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:37.701Z,1509671557.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:38.088Z,1509671558.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:38.103Z,1509671558.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:38.498Z,1509671558.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:38.522Z,1509671558.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:38.901Z,1509671558.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:38.931Z,1509671558.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:39.297Z,1509671559.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:39.323Z,1509671559.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:39.688Z,1509671559.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:39.697Z,1509671559.697 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T01:12:39.697Z,1509671559.697 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:12:39.697Z,1509671559.697 [BPC1](ERROR): Data Fault
2017-11-03T01:12:39.729Z,1509671559.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:39.817Z,1509671559.817 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:12:40.084Z,1509671560.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:40.099Z,1509671560.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:40.484Z,1509671560.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:40.498Z,1509671560.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:40.883Z,1509671560.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:40.898Z,1509671560.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:40.989Z,1509671560.989 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:12:40.989Z,1509671560.989 [BPC1] No Fault, FailCount= 1
2017-11-03T01:12:41.301Z,1509671561.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:41.379Z,1509671561.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:41.697Z,1509671561.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:41.731Z,1509671561.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:42.098Z,1509671562.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:42.133Z,1509671562.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:42.488Z,1509671562.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:42.542Z,1509671562.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:42.887Z,1509671562.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:42.902Z,1509671562.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:43.288Z,1509671563.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:43.303Z,1509671563.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:43.692Z,1509671563.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:43.711Z,1509671563.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:44.088Z,1509671564.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:44.102Z,1509671564.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:44.501Z,1509671564.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:44.534Z,1509671564.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:44.901Z,1509671564.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:44.933Z,1509671564.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:45.301Z,1509671565.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:45.333Z,1509671565.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:45.684Z,1509671565.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:45.699Z,1509671565.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:46.087Z,1509671566.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:46.102Z,1509671566.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:46.488Z,1509671566.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:46.503Z,1509671566.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:46.884Z,1509671566.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:46.899Z,1509671566.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:47.301Z,1509671567.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:47.334Z,1509671567.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:47.701Z,1509671567.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:47.734Z,1509671567.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:48.101Z,1509671568.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:48.134Z,1509671568.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:48.487Z,1509671568.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:48.507Z,1509671568.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:48.888Z,1509671568.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:48.903Z,1509671568.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:49.288Z,1509671569.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:49.303Z,1509671569.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:49.692Z,1509671569.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:49.711Z,1509671569.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:50.088Z,1509671570.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:50.107Z,1509671570.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:50.497Z,1509671570.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:50.533Z,1509671570.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:50.901Z,1509671570.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:50.934Z,1509671570.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:51.301Z,1509671571.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:51.333Z,1509671571.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:51.688Z,1509671571.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:51.703Z,1509671571.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:52.092Z,1509671572.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:52.133Z,1509671572.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:52.493Z,1509671572.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:52.507Z,1509671572.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:52.888Z,1509671572.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:52.903Z,1509671572.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:53.301Z,1509671573.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:53.331Z,1509671573.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:53.701Z,1509671573.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:53.733Z,1509671573.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:54.102Z,1509671574.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:54.132Z,1509671574.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:54.488Z,1509671574.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:54.566Z,1509671574.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:54.895Z,1509671574.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:54.910Z,1509671574.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:55.294Z,1509671575.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:55.344Z,1509671575.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:55.693Z,1509671575.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:55.708Z,1509671575.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:56.093Z,1509671576.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:56.143Z,1509671576.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:56.498Z,1509671576.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:56.543Z,1509671576.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:56.897Z,1509671576.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:56.912Z,1509671576.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:57.298Z,1509671577.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:57.313Z,1509671577.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:57.694Z,1509671577.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:57.710Z,1509671577.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:58.091Z,1509671578.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:58.111Z,1509671578.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:58.493Z,1509671578.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:58.508Z,1509671578.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:58.894Z,1509671578.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:58.909Z,1509671578.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:59.298Z,1509671579.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:59.313Z,1509671579.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:12:59.698Z,1509671579.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:12:59.713Z,1509671579.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:00.096Z,1509671580.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:00.111Z,1509671580.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:00.495Z,1509671580.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:00.511Z,1509671580.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:00.896Z,1509671580.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:00.912Z,1509671580.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:01.289Z,1509671581.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:01.304Z,1509671581.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:01.695Z,1509671581.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:01.711Z,1509671581.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:02.094Z,1509671582.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:02.109Z,1509671582.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:02.496Z,1509671582.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:02.515Z,1509671582.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:02.957Z,1509671582.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:02.992Z,1509671582.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:03.298Z,1509671583.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:03.313Z,1509671583.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:03.694Z,1509671583.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:03.710Z,1509671583.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:04.092Z,1509671584.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:04.123Z,1509671584.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:04.496Z,1509671584.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:04.512Z,1509671584.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:04.894Z,1509671584.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:04.915Z,1509671584.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:05.305Z,1509671585.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:05.321Z,1509671585.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:05.708Z,1509671585.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:05.725Z,1509671585.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:06.105Z,1509671586.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:06.120Z,1509671586.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:06.495Z,1509671586.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:06.515Z,1509671586.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:06.895Z,1509671586.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:06.909Z,1509671586.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:07.295Z,1509671587.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:07.315Z,1509671587.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:07.694Z,1509671587.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:07.709Z,1509671587.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:08.095Z,1509671588.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:08.111Z,1509671588.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:08.505Z,1509671588.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:08.595Z,1509671588.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:08.904Z,1509671588.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:08.924Z,1509671588.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:09.310Z,1509671589.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:09.326Z,1509671589.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:09.687Z,1509671589.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:09.753Z,1509671589.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:10.084Z,1509671590.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:10.114Z,1509671590.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:10.486Z,1509671590.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:10.535Z,1509671590.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:10.888Z,1509671590.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:10.953Z,1509671590.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:11.306Z,1509671591.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:11.322Z,1509671591.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:11.710Z,1509671591.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:11.727Z,1509671591.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:12.107Z,1509671592.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:12.123Z,1509671592.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:12.484Z,1509671592.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:12.519Z,1509671592.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:12.887Z,1509671592.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:12.913Z,1509671592.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:13.284Z,1509671593.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:13.315Z,1509671593.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:13.685Z,1509671593.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:13.712Z,1509671593.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:14.087Z,1509671594.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:14.112Z,1509671594.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:14.505Z,1509671594.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:14.521Z,1509671594.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:14.905Z,1509671594.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:14.920Z,1509671594.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:15.305Z,1509671595.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:15.321Z,1509671595.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:15.680Z,1509671595.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:15.711Z,1509671595.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:16.084Z,1509671596.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:16.118Z,1509671596.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:16.209Z,1509671596.209 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:13:16.209Z,1509671596.209 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T01:13:16.483Z,1509671596.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:16.518Z,1509671596.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:16.602Z,1509671596.602 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:13:16.602Z,1509671596.602 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:13:16.602Z,1509671596.602 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:13:16.602Z,1509671596.602 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:13:16.883Z,1509671596.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:16.918Z,1509671596.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:17.305Z,1509671597.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:17.321Z,1509671597.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:17.693Z,1509671597.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:17.723Z,1509671597.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:18.105Z,1509671598.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:18.121Z,1509671598.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:18.484Z,1509671598.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:18.515Z,1509671598.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:18.887Z,1509671598.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:18.926Z,1509671598.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:19.284Z,1509671599.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:19.299Z,1509671599.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:19.685Z,1509671599.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:19.701Z,1509671599.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:20.091Z,1509671600.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:20.127Z,1509671600.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:20.494Z,1509671600.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:20.527Z,1509671600.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:20.730Z,1509671600.730 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:13:20.787Z,1509671600.787 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:13:20.788Z,1509671600.788 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:13:20.789Z,1509671600.789 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:13:20.790Z,1509671600.790 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:13:20.900Z,1509671600.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:20.942Z,1509671600.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:21.301Z,1509671601.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:21.346Z,1509671601.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:21.726Z,1509671601.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:21.777Z,1509671601.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:22.085Z,1509671602.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:22.093Z,1509671602.093 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T01:13:22.093Z,1509671602.093 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:13:22.093Z,1509671602.093 [BPC1](ERROR): Data Fault
2017-11-03T01:13:22.105Z,1509671602.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:22.217Z,1509671602.217 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:13:22.491Z,1509671602.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:22.506Z,1509671602.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:22.888Z,1509671602.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:22.903Z,1509671602.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:23.309Z,1509671603.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:23.339Z,1509671603.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:23.418Z,1509671603.418 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:13:23.418Z,1509671603.418 [BPC1] No Fault, FailCount= 1
2017-11-03T01:13:23.705Z,1509671603.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:23.775Z,1509671603.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:26.882Z,1509671606.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:26.938Z,1509671606.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:27.079Z,1509671607.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:27.135Z,1509671607.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:27.463Z,1509671607.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:27.490Z,1509671607.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:27.868Z,1509671607.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:27.894Z,1509671607.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:28.282Z,1509671608.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:28.297Z,1509671608.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:28.683Z,1509671608.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:28.698Z,1509671608.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:29.087Z,1509671609.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:29.146Z,1509671609.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:29.461Z,1509671609.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:29.476Z,1509671609.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:29.863Z,1509671609.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:29.878Z,1509671609.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:30.261Z,1509671610.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:30.275Z,1509671610.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:30.661Z,1509671610.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:30.676Z,1509671610.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:31.056Z,1509671611.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:31.071Z,1509671611.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:31.481Z,1509671611.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:31.511Z,1509671611.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:31.877Z,1509671611.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:31.902Z,1509671611.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:32.273Z,1509671612.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:32.304Z,1509671612.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:32.660Z,1509671612.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:32.675Z,1509671612.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:33.063Z,1509671613.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:33.083Z,1509671613.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:33.476Z,1509671613.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:33.504Z,1509671613.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:33.867Z,1509671613.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:33.903Z,1509671613.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:34.277Z,1509671614.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:34.309Z,1509671614.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:34.681Z,1509671614.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:34.707Z,1509671614.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:35.077Z,1509671615.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:35.108Z,1509671615.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:35.464Z,1509671615.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:35.487Z,1509671615.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:35.871Z,1509671615.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:35.885Z,1509671615.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:36.263Z,1509671616.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:36.283Z,1509671616.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:36.664Z,1509671616.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:36.679Z,1509671616.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:37.059Z,1509671617.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:37.074Z,1509671617.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:37.478Z,1509671617.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:37.508Z,1509671617.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:37.885Z,1509671617.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:37.915Z,1509671617.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:38.277Z,1509671618.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:38.308Z,1509671618.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:38.663Z,1509671618.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:38.683Z,1509671618.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:39.134Z,1509671619.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:39.234Z,1509671619.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:39.466Z,1509671619.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:39.480Z,1509671619.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:39.868Z,1509671619.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:39.923Z,1509671619.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:40.274Z,1509671620.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:40.289Z,1509671620.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:40.672Z,1509671620.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:40.716Z,1509671620.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:41.106Z,1509671621.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:41.164Z,1509671621.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:41.470Z,1509671621.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:41.485Z,1509671621.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:41.870Z,1509671621.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:41.885Z,1509671621.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:42.268Z,1509671622.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:42.283Z,1509671622.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:42.669Z,1509671622.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:42.684Z,1509671622.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:43.079Z,1509671623.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:43.169Z,1509671623.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:43.474Z,1509671623.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:43.489Z,1509671623.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:43.873Z,1509671623.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:43.889Z,1509671623.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:44.272Z,1509671624.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:44.287Z,1509671624.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:44.667Z,1509671624.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:44.682Z,1509671624.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:45.068Z,1509671625.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:45.083Z,1509671625.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:45.459Z,1509671625.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:45.493Z,1509671625.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:45.863Z,1509671625.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:45.894Z,1509671625.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:46.281Z,1509671626.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:46.297Z,1509671626.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:46.669Z,1509671626.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:46.694Z,1509671626.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:47.081Z,1509671627.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:47.096Z,1509671627.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:47.471Z,1509671627.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:47.496Z,1509671627.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:47.863Z,1509671627.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:47.893Z,1509671627.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:48.260Z,1509671628.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:48.291Z,1509671628.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:48.662Z,1509671628.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:48.693Z,1509671628.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:49.063Z,1509671629.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:49.078Z,1509671629.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:49.474Z,1509671629.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:49.497Z,1509671629.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:49.895Z,1509671629.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:49.910Z,1509671629.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:50.274Z,1509671630.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:50.297Z,1509671630.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:50.667Z,1509671630.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:50.699Z,1509671630.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:51.064Z,1509671631.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:51.098Z,1509671631.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:51.462Z,1509671631.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:51.476Z,1509671631.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:51.865Z,1509671631.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:51.880Z,1509671631.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:52.277Z,1509671632.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:52.307Z,1509671632.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:52.689Z,1509671632.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:52.703Z,1509671632.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:53.095Z,1509671633.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:53.206Z,1509671633.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:53.465Z,1509671633.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:53.480Z,1509671633.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:53.866Z,1509671633.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:53.881Z,1509671633.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:54.265Z,1509671634.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:54.311Z,1509671634.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:54.666Z,1509671634.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:54.687Z,1509671634.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:55.081Z,1509671635.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:55.152Z,1509671635.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:55.470Z,1509671635.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:55.527Z,1509671635.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:55.878Z,1509671635.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:55.909Z,1509671635.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:56.282Z,1509671636.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:56.312Z,1509671636.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:56.668Z,1509671636.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:56.684Z,1509671636.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:57.099Z,1509671637.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:57.161Z,1509671637.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:57.470Z,1509671637.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:57.486Z,1509671637.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:57.871Z,1509671637.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:57.887Z,1509671637.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:58.279Z,1509671638.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:58.303Z,1509671638.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:58.680Z,1509671638.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:58.696Z,1509671638.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:59.077Z,1509671639.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:59.092Z,1509671639.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:59.459Z,1509671639.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:59.490Z,1509671639.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:13:59.861Z,1509671639.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:13:59.895Z,1509671639.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:00.256Z,1509671640.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:00.286Z,1509671640.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:00.661Z,1509671640.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:00.695Z,1509671640.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:01.057Z,1509671641.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:01.085Z,1509671641.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:01.485Z,1509671641.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:01.500Z,1509671641.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:01.882Z,1509671641.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:01.897Z,1509671641.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:02.281Z,1509671642.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:02.296Z,1509671642.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:02.661Z,1509671642.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:02.695Z,1509671642.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:03.061Z,1509671643.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:03.095Z,1509671643.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:03.462Z,1509671643.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:03.489Z,1509671643.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:03.859Z,1509671643.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:03.886Z,1509671643.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:04.282Z,1509671644.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:04.298Z,1509671644.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:04.683Z,1509671644.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:04.698Z,1509671644.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:05.082Z,1509671645.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:05.097Z,1509671645.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:05.460Z,1509671645.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:05.487Z,1509671645.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:05.880Z,1509671645.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:05.896Z,1509671645.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:06.260Z,1509671646.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:06.286Z,1509671646.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:06.664Z,1509671646.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:06.689Z,1509671646.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:07.085Z,1509671647.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:07.152Z,1509671647.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:07.481Z,1509671647.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:07.497Z,1509671647.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:07.881Z,1509671647.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:07.962Z,1509671647.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:08.282Z,1509671648.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:08.297Z,1509671648.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:08.663Z,1509671648.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:08.719Z,1509671648.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:09.103Z,1509671649.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:09.149Z,1509671649.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:09.462Z,1509671649.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:09.518Z,1509671649.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:09.856Z,1509671649.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:09.903Z,1509671649.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:10.281Z,1509671650.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:10.296Z,1509671650.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:10.685Z,1509671650.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:10.700Z,1509671650.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:11.094Z,1509671651.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:11.151Z,1509671651.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:11.463Z,1509671651.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:11.488Z,1509671651.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:11.863Z,1509671651.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:11.890Z,1509671651.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:12.263Z,1509671652.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:12.288Z,1509671652.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:12.663Z,1509671652.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:12.689Z,1509671652.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:13.063Z,1509671653.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:13.088Z,1509671653.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:13.481Z,1509671653.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:13.509Z,1509671653.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:13.881Z,1509671653.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:13.910Z,1509671653.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:14.277Z,1509671654.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:14.312Z,1509671654.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:14.663Z,1509671654.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:14.679Z,1509671654.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:15.064Z,1509671655.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:15.079Z,1509671655.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:15.476Z,1509671655.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:15.512Z,1509671655.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:15.864Z,1509671655.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:15.879Z,1509671655.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:16.281Z,1509671656.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:16.311Z,1509671656.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:16.677Z,1509671656.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:16.692Z,1509671656.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:17.081Z,1509671657.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:17.116Z,1509671657.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:17.467Z,1509671657.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:17.482Z,1509671657.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:17.867Z,1509671657.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:17.882Z,1509671657.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:18.268Z,1509671658.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:18.291Z,1509671658.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:18.669Z,1509671658.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:18.684Z,1509671658.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:19.068Z,1509671659.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:19.082Z,1509671659.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:19.482Z,1509671659.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:19.513Z,1509671659.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:19.889Z,1509671659.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:19.913Z,1509671659.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:20.273Z,1509671660.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:20.289Z,1509671660.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:20.668Z,1509671660.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:20.683Z,1509671660.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:21.103Z,1509671661.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:21.135Z,1509671661.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:21.469Z,1509671661.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:21.477Z,1509671661.477 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:14:21.478Z,1509671661.478 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:14:21.478Z,1509671661.478 [BPC1](ERROR): Data Fault
2017-11-03T01:14:21.486Z,1509671661.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:21.576Z,1509671661.576 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:14:21.870Z,1509671661.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:21.885Z,1509671661.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:22.273Z,1509671662.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:22.289Z,1509671662.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:22.672Z,1509671662.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:22.686Z,1509671662.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:22.772Z,1509671662.772 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:14:22.772Z,1509671662.772 [BPC1] No Fault, FailCount= 1
2017-11-03T01:14:23.083Z,1509671663.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:23.218Z,1509671663.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:23.469Z,1509671663.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:23.483Z,1509671663.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:23.872Z,1509671663.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:23.926Z,1509671663.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:27.047Z,1509671667.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:27.071Z,1509671667.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:27.236Z,1509671667.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:27.283Z,1509671667.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:27.636Z,1509671667.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:27.646Z,1509671667.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x12969 got:0x1857
2017-11-03T01:14:27.686Z,1509671667.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:28.036Z,1509671668.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:28.051Z,1509671668.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:28.435Z,1509671668.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:28.473Z,1509671668.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:28.822Z,1509671668.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:28.837Z,1509671668.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:29.208Z,1509671669.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:29.237Z,1509671669.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:29.612Z,1509671669.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:29.642Z,1509671669.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:30.021Z,1509671670.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:30.057Z,1509671670.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:30.429Z,1509671670.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:30.446Z,1509671670.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:30.834Z,1509671670.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:30.853Z,1509671670.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:31.236Z,1509671671.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:31.251Z,1509671671.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:31.671Z,1509671671.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:31.695Z,1509671671.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:32.021Z,1509671672.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:32.057Z,1509671672.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:32.422Z,1509671672.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:32.442Z,1509671672.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:32.823Z,1509671672.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:32.850Z,1509671672.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:33.233Z,1509671673.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:33.273Z,1509671673.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:33.679Z,1509671673.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:33.704Z,1509671673.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:34.033Z,1509671674.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:34.053Z,1509671674.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:34.412Z,1509671674.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:34.442Z,1509671674.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:34.813Z,1509671674.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:34.840Z,1509671674.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:35.237Z,1509671675.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:35.257Z,1509671675.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:35.631Z,1509671675.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:35.706Z,1509671675.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:36.039Z,1509671676.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:36.106Z,1509671676.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:36.416Z,1509671676.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:36.464Z,1509671676.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:36.813Z,1509671676.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:36.841Z,1509671676.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:37.247Z,1509671677.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:37.295Z,1509671677.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:37.643Z,1509671677.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:37.658Z,1509671677.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:38.033Z,1509671678.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:38.094Z,1509671678.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:38.413Z,1509671678.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:38.467Z,1509671678.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:38.815Z,1509671678.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:38.846Z,1509671678.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:39.231Z,1509671679.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:39.253Z,1509671679.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:39.634Z,1509671679.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:39.668Z,1509671679.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:40.033Z,1509671680.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:40.054Z,1509671680.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:40.413Z,1509671680.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:40.445Z,1509671680.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:40.819Z,1509671680.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:40.858Z,1509671680.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:41.239Z,1509671681.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:41.270Z,1509671681.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:41.634Z,1509671681.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:41.654Z,1509671681.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:42.031Z,1509671682.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:42.064Z,1509671682.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:42.416Z,1509671682.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:42.454Z,1509671682.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:42.811Z,1509671682.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:42.846Z,1509671682.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:43.235Z,1509671683.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:43.255Z,1509671683.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:43.625Z,1509671683.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:43.667Z,1509671683.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:44.027Z,1509671684.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:44.059Z,1509671684.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:44.413Z,1509671684.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:44.450Z,1509671684.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:44.813Z,1509671684.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:44.828Z,1509671684.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:45.230Z,1509671685.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:45.259Z,1509671685.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:45.657Z,1509671685.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:45.696Z,1509671685.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:46.034Z,1509671686.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:46.078Z,1509671686.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:46.421Z,1509671686.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:46.437Z,1509671686.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:46.826Z,1509671686.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:46.847Z,1509671686.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:47.236Z,1509671687.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:47.251Z,1509671687.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:47.677Z,1509671687.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:47.706Z,1509671687.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:48.034Z,1509671688.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:48.073Z,1509671688.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:48.425Z,1509671688.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:48.446Z,1509671688.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:48.823Z,1509671688.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:48.843Z,1509671688.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:49.234Z,1509671689.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:49.273Z,1509671689.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:49.637Z,1509671689.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:49.657Z,1509671689.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:50.034Z,1509671690.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:50.106Z,1509671690.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:50.426Z,1509671690.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:50.487Z,1509671690.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:50.808Z,1509671690.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:50.843Z,1509671690.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:51.229Z,1509671691.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:51.249Z,1509671691.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:51.636Z,1509671691.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:51.694Z,1509671691.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:52.037Z,1509671692.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:52.051Z,1509671692.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:52.413Z,1509671692.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:52.482Z,1509671692.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:52.830Z,1509671692.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:52.886Z,1509671692.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:53.235Z,1509671693.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:53.253Z,1509671693.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:53.637Z,1509671693.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:53.652Z,1509671693.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:54.034Z,1509671694.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:54.068Z,1509671694.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:54.414Z,1509671694.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:54.439Z,1509671694.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:54.812Z,1509671694.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:54.846Z,1509671694.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:55.239Z,1509671695.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:55.262Z,1509671695.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:55.631Z,1509671695.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:55.666Z,1509671695.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:56.030Z,1509671696.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:56.048Z,1509671696.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:56.416Z,1509671696.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:56.449Z,1509671696.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:56.812Z,1509671696.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:56.851Z,1509671696.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:57.231Z,1509671697.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:57.251Z,1509671697.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:57.631Z,1509671697.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:57.657Z,1509671697.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:58.026Z,1509671698.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:58.056Z,1509671698.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:58.409Z,1509671698.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:58.443Z,1509671698.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:58.814Z,1509671698.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:58.908Z,1509671698.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:59.226Z,1509671699.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:59.266Z,1509671699.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:14:59.666Z,1509671699.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:14:59.705Z,1509671699.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:00.040Z,1509671700.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:00.055Z,1509671700.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:00.416Z,1509671700.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:00.464Z,1509671700.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:00.814Z,1509671700.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:00.851Z,1509671700.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:01.236Z,1509671701.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:01.255Z,1509671701.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:01.655Z,1509671701.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:01.709Z,1509671701.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:01.709Z,1509671701.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2017-11-03T01:15:01.709Z,1509671701.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:15:01.711Z,1509671701.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:01.711Z,1509671701.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2017-11-03T01:15:01.711Z,1509671701.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:15:01.713Z,1509671701.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:01.713Z,1509671701.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2017-11-03T01:15:01.713Z,1509671701.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:15:01.790Z,1509671701.790 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:15:01.790Z,1509671701.790 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:15:01.790Z,1509671701.790 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:15:02.022Z,1509671702.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:02.156Z,1509671702.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:15:02.156Z,1509671702.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2017-11-03T01:15:02.157Z,1509671702.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:15:02.157Z,1509671702.157 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2017-11-03T01:15:02.157Z,1509671702.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:15:02.158Z,1509671702.158 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2017-11-03T01:15:02.418Z,1509671702.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:02.436Z,1509671702.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:15:02.437Z,1509671702.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:15:02.437Z,1509671702.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:15:02.437Z,1509671702.437 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:15:02.438Z,1509671702.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:15:02.438Z,1509671702.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:15:02.438Z,1509671702.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:15:02.439Z,1509671702.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:15:02.439Z,1509671702.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:15:02.815Z,1509671702.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:02.842Z,1509671702.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:03.233Z,1509671703.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:03.254Z,1509671703.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:03.633Z,1509671703.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:03.674Z,1509671703.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:04.033Z,1509671704.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:04.053Z,1509671704.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:04.421Z,1509671704.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:04.444Z,1509671704.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:04.828Z,1509671704.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:04.917Z,1509671704.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:05.233Z,1509671705.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:05.272Z,1509671705.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:05.633Z,1509671705.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:05.686Z,1509671705.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:06.035Z,1509671706.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:06.053Z,1509671706.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:06.424Z,1509671706.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:06.486Z,1509671706.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:06.821Z,1509671706.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:06.878Z,1509671706.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:07.234Z,1509671707.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:07.254Z,1509671707.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:07.638Z,1509671707.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:07.655Z,1509671707.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:08.035Z,1509671708.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:08.050Z,1509671708.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:08.422Z,1509671708.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:08.471Z,1509671708.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:08.822Z,1509671708.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:08.839Z,1509671708.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:09.242Z,1509671709.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:09.257Z,1509671709.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:09.640Z,1509671709.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:09.655Z,1509671709.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:10.033Z,1509671710.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:10.073Z,1509671710.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:10.422Z,1509671710.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:10.437Z,1509671710.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:10.828Z,1509671710.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:10.852Z,1509671710.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:11.236Z,1509671711.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:11.251Z,1509671711.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:11.633Z,1509671711.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:11.691Z,1509671711.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:12.034Z,1509671712.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:12.054Z,1509671712.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:12.423Z,1509671712.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:12.444Z,1509671712.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:12.820Z,1509671712.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:12.843Z,1509671712.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:13.237Z,1509671713.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:13.278Z,1509671713.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:13.658Z,1509671713.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:13.711Z,1509671713.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:14.033Z,1509671714.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:14.052Z,1509671714.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:14.412Z,1509671714.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:14.449Z,1509671714.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:14.815Z,1509671714.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:14.865Z,1509671714.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:15.233Z,1509671715.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:15.253Z,1509671715.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:15.658Z,1509671715.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:15.700Z,1509671715.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:16.031Z,1509671716.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:16.052Z,1509671716.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:16.413Z,1509671716.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:16.440Z,1509671716.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:16.818Z,1509671716.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:16.847Z,1509671716.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:17.119Z,1509671717.119 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:15:17.119Z,1509671717.119 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T01:15:17.119Z,1509671717.119 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:15:17.225Z,1509671717.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:17.258Z,1509671717.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:15:17.259Z,1509671717.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:17.349Z,1509671717.349 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:15:17.533Z,1509671717.533 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:15:17.637Z,1509671717.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:17.678Z,1509671717.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:15:17.679Z,1509671717.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:17.717Z,1509671717.717 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:15:18.038Z,1509671718.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:18.070Z,1509671718.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:15:18.071Z,1509671718.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:18.415Z,1509671718.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:18.448Z,1509671718.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:15:18.450Z,1509671718.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:18.812Z,1509671718.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:18.849Z,1509671718.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:15:18.850Z,1509671718.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:18.937Z,1509671718.937 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:15:18.937Z,1509671718.937 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T01:15:19.215Z,1509671719.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:19.280Z,1509671719.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:15:19.281Z,1509671719.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:19.333Z,1509671719.333 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:15:19.333Z,1509671719.333 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:15:19.333Z,1509671719.333 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:15:19.333Z,1509671719.333 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:15:19.616Z,1509671719.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:19.641Z,1509671719.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:15:19.642Z,1509671719.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:20.015Z,1509671720.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:20.054Z,1509671720.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:15:20.055Z,1509671720.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:20.443Z,1509671720.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:20.502Z,1509671720.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T01:15:20.503Z,1509671720.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:20.827Z,1509671720.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:20.853Z,1509671720.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:15:20.854Z,1509671720.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:21.233Z,1509671721.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:21.292Z,1509671721.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:15:21.293Z,1509671721.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:21.614Z,1509671721.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:21.666Z,1509671721.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:15:21.667Z,1509671721.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:22.013Z,1509671722.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:22.027Z,1509671722.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:15:22.041Z,1509671722.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:22.416Z,1509671722.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:22.455Z,1509671722.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:15:22.456Z,1509671722.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:22.820Z,1509671722.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:22.850Z,1509671722.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:15:22.851Z,1509671722.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:23.226Z,1509671723.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:23.263Z,1509671723.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:15:23.265Z,1509671723.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:23.459Z,1509671723.459 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:15:23.515Z,1509671723.515 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:15:23.516Z,1509671723.516 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:15:23.517Z,1509671723.517 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:15:23.518Z,1509671723.518 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:15:23.629Z,1509671723.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:23.699Z,1509671723.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T01:15:23.700Z,1509671723.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:24.033Z,1509671724.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:24.075Z,1509671724.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:27.298Z,1509671727.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:27.313Z,1509671727.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:27.440Z,1509671727.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:27.487Z,1509671727.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:27.861Z,1509671727.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:27.883Z,1509671727.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:28.264Z,1509671728.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:28.279Z,1509671728.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:28.660Z,1509671728.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:28.675Z,1509671728.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:29.040Z,1509671729.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:29.120Z,1509671729.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:29.447Z,1509671729.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:29.473Z,1509671729.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:29.840Z,1509671729.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:29.855Z,1509671729.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:30.253Z,1509671730.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:30.269Z,1509671730.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:30.661Z,1509671730.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:30.689Z,1509671730.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:31.053Z,1509671731.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:31.141Z,1509671731.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:31.452Z,1509671731.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:31.467Z,1509671731.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:31.851Z,1509671731.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:31.867Z,1509671731.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:32.250Z,1509671732.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:32.309Z,1509671732.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:32.653Z,1509671732.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:32.668Z,1509671732.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:33.044Z,1509671733.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:33.112Z,1509671733.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:33.460Z,1509671733.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:33.475Z,1509671733.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:33.861Z,1509671733.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:33.930Z,1509671733.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:34.264Z,1509671734.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:34.279Z,1509671734.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:34.650Z,1509671734.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:34.691Z,1509671734.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:35.052Z,1509671735.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:35.067Z,1509671735.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:35.440Z,1509671735.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:35.491Z,1509671735.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:35.840Z,1509671735.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:35.890Z,1509671735.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:36.266Z,1509671736.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:36.284Z,1509671736.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:36.661Z,1509671736.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:36.676Z,1509671736.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:37.049Z,1509671737.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:37.074Z,1509671737.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:37.448Z,1509671737.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:37.480Z,1509671737.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:37.843Z,1509671737.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:37.874Z,1509671737.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:38.240Z,1509671738.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:38.273Z,1509671738.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:38.644Z,1509671738.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:38.679Z,1509671738.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:39.036Z,1509671739.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:39.051Z,1509671739.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:39.452Z,1509671739.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:39.477Z,1509671739.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:39.873Z,1509671739.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:39.888Z,1509671739.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:40.261Z,1509671740.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:40.276Z,1509671740.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:40.640Z,1509671740.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:40.675Z,1509671740.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:41.040Z,1509671741.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:41.072Z,1509671741.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:41.444Z,1509671741.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:41.477Z,1509671741.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:41.839Z,1509671741.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:41.875Z,1509671741.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:42.254Z,1509671742.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:42.279Z,1509671742.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:42.667Z,1509671742.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:42.682Z,1509671742.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:43.060Z,1509671743.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:43.145Z,1509671743.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:43.446Z,1509671743.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:43.469Z,1509671743.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:43.842Z,1509671743.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:43.857Z,1509671743.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:44.240Z,1509671744.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:44.255Z,1509671744.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:44.641Z,1509671744.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:44.679Z,1509671744.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:45.041Z,1509671745.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:45.090Z,1509671745.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:45.458Z,1509671745.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:45.490Z,1509671745.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:45.858Z,1509671745.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:45.888Z,1509671745.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:46.259Z,1509671746.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:46.286Z,1509671746.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:46.643Z,1509671746.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:46.666Z,1509671746.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:47.043Z,1509671747.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:47.135Z,1509671747.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:47.449Z,1509671747.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:47.465Z,1509671747.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:47.848Z,1509671747.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:47.907Z,1509671747.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:48.256Z,1509671748.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:48.273Z,1509671748.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:48.655Z,1509671748.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:48.710Z,1509671748.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:49.056Z,1509671749.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:49.076Z,1509671749.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:49.443Z,1509671749.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:49.510Z,1509671749.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:49.843Z,1509671749.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:49.905Z,1509671749.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:50.240Z,1509671750.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:50.270Z,1509671750.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:50.643Z,1509671750.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:50.674Z,1509671750.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:51.043Z,1509671751.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:51.068Z,1509671751.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:51.468Z,1509671751.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:51.491Z,1509671751.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:51.866Z,1509671751.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:51.886Z,1509671751.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:52.260Z,1509671752.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:52.275Z,1509671752.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:52.643Z,1509671752.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:52.668Z,1509671752.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:53.039Z,1509671753.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:53.065Z,1509671753.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:53.442Z,1509671753.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:53.492Z,1509671753.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:53.849Z,1509671753.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:53.881Z,1509671753.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:54.260Z,1509671754.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:54.297Z,1509671754.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:54.678Z,1509671754.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:54.705Z,1509671754.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:55.063Z,1509671755.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:55.086Z,1509671755.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:55.449Z,1509671755.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:55.502Z,1509671755.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:55.849Z,1509671755.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:55.897Z,1509671755.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:56.272Z,1509671756.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:56.316Z,1509671756.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:56.651Z,1509671756.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:56.674Z,1509671756.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:57.070Z,1509671757.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:57.159Z,1509671757.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:57.462Z,1509671757.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:57.478Z,1509671757.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:57.877Z,1509671757.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:57.919Z,1509671757.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:58.259Z,1509671758.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:58.306Z,1509671758.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:58.647Z,1509671758.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:58.701Z,1509671758.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:59.049Z,1509671759.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:59.143Z,1509671759.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:59.442Z,1509671759.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:59.479Z,1509671759.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:59.841Z,1509671759.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:15:59.863Z,1509671759.863 [BPC1](ERROR): Failed to parse message.
2017-11-03T01:15:59.863Z,1509671759.863 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:15:59.863Z,1509671759.863 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:15:59.863Z,1509671759.863 [BPC1](ERROR): Data Fault
2017-11-03T01:15:59.885Z,1509671759.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:15:59.961Z,1509671759.961 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:16:00.264Z,1509671760.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:00.319Z,1509671760.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:00.663Z,1509671760.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:00.691Z,1509671760.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:01.051Z,1509671761.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:01.165Z,1509671761.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:01.266Z,1509671761.266 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:16:01.266Z,1509671761.266 [BPC1] No Fault, FailCount= 1
2017-11-03T01:16:01.459Z,1509671761.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:01.611Z,1509671761.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:01.841Z,1509671761.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:01.893Z,1509671761.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:02.245Z,1509671762.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:02.296Z,1509671762.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:02.642Z,1509671762.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:02.692Z,1509671762.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:03.041Z,1509671763.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:03.093Z,1509671763.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:03.459Z,1509671763.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:03.479Z,1509671763.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:03.878Z,1509671763.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:03.894Z,1509671763.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:04.252Z,1509671764.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:04.290Z,1509671764.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:04.639Z,1509671764.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:04.702Z,1509671764.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:05.041Z,1509671765.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:05.098Z,1509671765.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:05.460Z,1509671765.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:05.483Z,1509671765.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:05.847Z,1509671765.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:05.886Z,1509671765.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:06.253Z,1509671766.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:06.285Z,1509671766.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:06.653Z,1509671766.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:06.684Z,1509671766.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:07.053Z,1509671767.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:07.084Z,1509671767.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:07.447Z,1509671767.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:07.462Z,1509671767.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:07.844Z,1509671767.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:07.859Z,1509671767.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:08.239Z,1509671768.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:08.255Z,1509671768.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:08.640Z,1509671768.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:08.662Z,1509671768.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:09.040Z,1509671769.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:09.059Z,1509671769.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:09.453Z,1509671769.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:09.484Z,1509671769.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:09.857Z,1509671769.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:09.881Z,1509671769.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:10.254Z,1509671770.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:10.290Z,1509671770.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:10.640Z,1509671770.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:10.663Z,1509671770.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:11.043Z,1509671771.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:11.131Z,1509671771.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:11.442Z,1509671771.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:11.473Z,1509671771.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:11.840Z,1509671771.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:11.855Z,1509671771.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:12.253Z,1509671772.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:12.281Z,1509671772.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:12.657Z,1509671772.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:12.691Z,1509671772.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:13.054Z,1509671773.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:13.137Z,1509671773.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:13.441Z,1509671773.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:13.494Z,1509671773.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:13.847Z,1509671773.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:13.886Z,1509671773.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:14.243Z,1509671774.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:14.263Z,1509671774.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:14.647Z,1509671774.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:14.700Z,1509671774.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:15.048Z,1509671775.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:15.112Z,1509671775.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:15.453Z,1509671775.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:15.552Z,1509671775.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:15.854Z,1509671775.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:15.869Z,1509671775.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:16.254Z,1509671776.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:16.299Z,1509671776.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:16.648Z,1509671776.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:16.663Z,1509671776.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:17.046Z,1509671777.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:17.092Z,1509671777.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:17.448Z,1509671777.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:17.463Z,1509671777.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:17.848Z,1509671777.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:17.863Z,1509671777.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:18.261Z,1509671778.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:18.277Z,1509671778.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:18.660Z,1509671778.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:18.675Z,1509671778.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:19.062Z,1509671779.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:19.161Z,1509671779.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:19.454Z,1509671779.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:19.469Z,1509671779.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:19.852Z,1509671779.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:19.867Z,1509671779.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:20.248Z,1509671780.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:20.263Z,1509671780.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:20.655Z,1509671780.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:20.670Z,1509671780.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:21.045Z,1509671781.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:21.066Z,1509671781.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:21.461Z,1509671781.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:21.476Z,1509671781.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:21.860Z,1509671781.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:21.917Z,1509671781.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:22.261Z,1509671782.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:22.276Z,1509671782.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:22.649Z,1509671782.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:22.671Z,1509671782.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:23.050Z,1509671783.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:23.070Z,1509671783.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:23.452Z,1509671783.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:23.468Z,1509671783.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:23.846Z,1509671783.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:23.866Z,1509671783.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:24.262Z,1509671784.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:24.278Z,1509671784.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:27.533Z,1509671787.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:27.563Z,1509671787.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:27.719Z,1509671787.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:27.735Z,1509671787.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:28.103Z,1509671788.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:28.158Z,1509671788.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:28.508Z,1509671788.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:28.539Z,1509671788.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:28.904Z,1509671788.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:28.973Z,1509671788.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:29.327Z,1509671789.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:29.342Z,1509671789.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:29.727Z,1509671789.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:29.787Z,1509671789.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:30.126Z,1509671790.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:30.141Z,1509671790.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:30.500Z,1509671790.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:30.551Z,1509671790.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:30.904Z,1509671790.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:30.939Z,1509671790.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:31.303Z,1509671791.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:31.363Z,1509671791.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:31.712Z,1509671791.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:31.743Z,1509671791.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:32.104Z,1509671792.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:32.143Z,1509671792.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:32.518Z,1509671792.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:32.543Z,1509671792.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:32.921Z,1509671792.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:32.954Z,1509671792.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:33.343Z,1509671793.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:33.394Z,1509671793.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:33.708Z,1509671793.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:33.724Z,1509671793.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:34.103Z,1509671794.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:34.118Z,1509671794.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:34.508Z,1509671794.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:34.524Z,1509671794.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:34.911Z,1509671794.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:34.927Z,1509671794.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:35.322Z,1509671795.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:35.353Z,1509671795.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:35.726Z,1509671795.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:35.748Z,1509671795.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:36.122Z,1509671796.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:36.153Z,1509671796.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:36.508Z,1509671796.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:36.523Z,1509671796.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:36.909Z,1509671796.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:36.925Z,1509671796.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:37.307Z,1509671797.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:37.323Z,1509671797.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:37.717Z,1509671797.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:37.732Z,1509671797.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:38.108Z,1509671798.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:38.124Z,1509671798.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:38.522Z,1509671798.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:38.553Z,1509671798.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:38.943Z,1509671798.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:38.964Z,1509671798.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:39.318Z,1509671799.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:39.333Z,1509671799.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:39.712Z,1509671799.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:39.728Z,1509671799.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:40.113Z,1509671800.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:40.129Z,1509671800.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:40.513Z,1509671800.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:40.535Z,1509671800.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:40.910Z,1509671800.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:40.937Z,1509671800.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:41.319Z,1509671801.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:41.339Z,1509671801.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:41.718Z,1509671801.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:41.733Z,1509671801.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:42.118Z,1509671802.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:42.182Z,1509671802.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:42.516Z,1509671802.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:42.531Z,1509671802.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:42.913Z,1509671802.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:42.978Z,1509671802.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:43.321Z,1509671803.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:43.343Z,1509671803.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:43.716Z,1509671803.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:43.770Z,1509671803.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:44.115Z,1509671804.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:44.135Z,1509671804.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:44.518Z,1509671804.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:44.611Z,1509671804.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:44.918Z,1509671804.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:44.961Z,1509671804.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:45.318Z,1509671805.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:45.333Z,1509671805.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:45.714Z,1509671805.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:45.729Z,1509671805.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:46.114Z,1509671806.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:46.130Z,1509671806.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:46.516Z,1509671806.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:46.532Z,1509671806.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:46.913Z,1509671806.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:46.929Z,1509671806.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:47.337Z,1509671807.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:47.383Z,1509671807.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:47.717Z,1509671807.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:47.739Z,1509671807.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:48.123Z,1509671808.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:48.143Z,1509671808.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:48.509Z,1509671808.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:48.524Z,1509671808.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:48.908Z,1509671808.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:48.924Z,1509671808.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:49.312Z,1509671809.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:49.335Z,1509671809.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:49.719Z,1509671809.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:49.734Z,1509671809.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:50.113Z,1509671810.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:50.128Z,1509671810.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:50.518Z,1509671810.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:50.533Z,1509671810.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:50.918Z,1509671810.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:50.933Z,1509671810.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:51.322Z,1509671811.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:51.337Z,1509671811.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:51.719Z,1509671811.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:51.735Z,1509671811.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:52.114Z,1509671812.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:52.129Z,1509671812.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:52.510Z,1509671812.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:52.525Z,1509671812.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:52.914Z,1509671812.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:52.930Z,1509671812.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:53.318Z,1509671813.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:53.333Z,1509671813.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:53.718Z,1509671813.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:53.733Z,1509671813.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:54.118Z,1509671814.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:54.133Z,1509671814.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:54.515Z,1509671814.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:54.534Z,1509671814.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:54.943Z,1509671814.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:54.968Z,1509671814.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:55.311Z,1509671815.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:55.377Z,1509671815.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:55.714Z,1509671815.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:55.729Z,1509671815.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:56.114Z,1509671816.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:56.130Z,1509671816.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:56.518Z,1509671816.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:56.533Z,1509671816.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:56.921Z,1509671816.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:56.979Z,1509671816.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:57.318Z,1509671817.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:57.333Z,1509671817.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:57.713Z,1509671817.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:57.770Z,1509671817.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:58.115Z,1509671818.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:58.130Z,1509671818.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:58.513Z,1509671818.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:58.567Z,1509671818.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:58.913Z,1509671818.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:58.970Z,1509671818.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:59.318Z,1509671819.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:59.339Z,1509671819.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:16:59.722Z,1509671819.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:16:59.737Z,1509671819.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:00.119Z,1509671820.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:00.134Z,1509671820.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:00.515Z,1509671820.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:00.531Z,1509671820.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:00.909Z,1509671820.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:00.925Z,1509671820.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:01.324Z,1509671821.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:01.379Z,1509671821.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:01.714Z,1509671821.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:01.731Z,1509671821.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:02.108Z,1509671822.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:02.125Z,1509671822.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:02.522Z,1509671822.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:02.543Z,1509671822.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:02.921Z,1509671822.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:02.943Z,1509671822.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:03.322Z,1509671823.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:03.338Z,1509671823.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:03.714Z,1509671823.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:03.742Z,1509671823.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:04.113Z,1509671824.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:04.129Z,1509671824.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:04.515Z,1509671824.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:04.531Z,1509671824.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:04.913Z,1509671824.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:04.929Z,1509671824.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:05.325Z,1509671825.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:05.346Z,1509671825.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:05.730Z,1509671825.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:05.767Z,1509671825.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:06.125Z,1509671826.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:06.147Z,1509671826.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:06.517Z,1509671826.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:06.532Z,1509671826.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:06.917Z,1509671826.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:06.932Z,1509671826.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:07.309Z,1509671827.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:07.331Z,1509671827.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:07.715Z,1509671827.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:07.730Z,1509671827.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:08.115Z,1509671828.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:08.131Z,1509671828.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:08.525Z,1509671828.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:08.540Z,1509671828.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:08.925Z,1509671828.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:08.939Z,1509671828.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:09.325Z,1509671829.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:09.347Z,1509671829.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:09.712Z,1509671829.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:09.781Z,1509671829.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:10.113Z,1509671830.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:10.128Z,1509671830.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:10.515Z,1509671830.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:10.531Z,1509671830.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:10.912Z,1509671830.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:10.982Z,1509671830.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:11.326Z,1509671831.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:11.341Z,1509671831.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:11.729Z,1509671831.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:11.744Z,1509671831.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:12.125Z,1509671832.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:12.175Z,1509671832.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:12.514Z,1509671832.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:12.529Z,1509671832.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:12.901Z,1509671832.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:12.965Z,1509671832.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:13.303Z,1509671833.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:13.370Z,1509671833.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:13.717Z,1509671833.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:13.733Z,1509671833.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:14.115Z,1509671834.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:14.131Z,1509671834.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:14.525Z,1509671834.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:14.547Z,1509671834.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:14.929Z,1509671834.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:14.943Z,1509671834.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:15.361Z,1509671835.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:15.406Z,1509671835.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:15.705Z,1509671835.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:15.732Z,1509671835.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:16.107Z,1509671836.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:16.139Z,1509671836.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:16.506Z,1509671836.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:16.521Z,1509671836.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:16.904Z,1509671836.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:16.923Z,1509671836.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:17.318Z,1509671837.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:17.343Z,1509671837.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:17.733Z,1509671837.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:17.748Z,1509671837.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:18.118Z,1509671838.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:18.142Z,1509671838.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:18.505Z,1509671838.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:18.520Z,1509671838.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:18.907Z,1509671838.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:18.923Z,1509671838.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:19.305Z,1509671839.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:19.320Z,1509671839.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:19.668Z,1509671839.668 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:17:19.668Z,1509671839.668 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T01:17:19.668Z,1509671839.668 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:17:19.736Z,1509671839.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:19.751Z,1509671839.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:17:19.751Z,1509671839.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:19.840Z,1509671839.840 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:17:20.085Z,1509671840.085 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:17:20.155Z,1509671840.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:20.192Z,1509671840.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T01:17:20.201Z,1509671840.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:20.282Z,1509671840.282 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:17:20.522Z,1509671840.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:20.537Z,1509671840.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:17:20.538Z,1509671840.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:20.918Z,1509671840.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:20.932Z,1509671840.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:17:20.933Z,1509671840.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:21.318Z,1509671841.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:21.338Z,1509671841.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:17:21.339Z,1509671841.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:21.713Z,1509671841.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:21.729Z,1509671841.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:17:21.730Z,1509671841.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:21.809Z,1509671841.809 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:17:21.809Z,1509671841.809 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T01:17:21.897Z,1509671841.897 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:17:21.897Z,1509671841.897 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:17:21.897Z,1509671841.897 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:17:21.897Z,1509671841.897 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:17:22.112Z,1509671842.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:22.130Z,1509671842.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:17:22.131Z,1509671842.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:22.515Z,1509671842.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:22.534Z,1509671842.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:17:22.535Z,1509671842.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:22.914Z,1509671842.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:22.934Z,1509671842.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:17:22.935Z,1509671842.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:23.321Z,1509671843.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:23.330Z,1509671843.330 [BPC1](ERROR): Failed to parse message.
2017-11-03T01:17:23.330Z,1509671843.330 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:17:23.330Z,1509671843.330 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:17:23.330Z,1509671843.330 [BPC1](ERROR): Data Fault
2017-11-03T01:17:23.339Z,1509671843.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:17:23.340Z,1509671843.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:23.343Z,1509671843.343 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T01:17:23.343Z,1509671843.343 [Default:CheckIn:C.Wait] Stopped
2017-11-03T01:17:23.344Z,1509671843.344 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T01:17:23.344Z,1509671843.344 [Default:CheckIn:D] Running Loop=1
2017-11-03T01:17:23.454Z,1509671843.454 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:17:23.684Z,1509671843.684 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T01:17:23.684Z,1509671843.684 [NAL9602] Data Fault, FailCount= 1
2017-11-03T01:17:23.684Z,1509671843.684 [NAL9602](ERROR): Data Fault
2017-11-03T01:17:23.721Z,1509671843.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:23.745Z,1509671843.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:17:23.745Z,1509671843.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:23.757Z,1509671843.757 [Default:CheckIn:D] Stopped
2017-11-03T01:17:23.757Z,1509671843.757 [Default:CheckIn:E] Running Loop=1
2017-11-03T01:17:23.849Z,1509671843.849 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T01:17:24.087Z,1509671844.087 [NAL9602](INFO): Powering down
2017-11-03T01:17:24.112Z,1509671844.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:24.146Z,1509671844.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:17:24.147Z,1509671844.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:24.155Z,1509671844.155 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.269845 min 
2017-11-03T01:17:24.155Z,1509671844.155 [Default:CheckIn:E] Stopped
2017-11-03T01:17:24.155Z,1509671844.155 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T01:17:24.155Z,1509671844.155 [Default:CheckIn] Stopped
2017-11-03T01:17:24.155Z,1509671844.155 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T01:17:24.155Z,1509671844.155 [Default:CheckIn](INFO): Running loop #7
2017-11-03T01:17:24.155Z,1509671844.155 [Default:CheckIn] Running Loop=7
2017-11-03T01:17:24.156Z,1509671844.156 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T01:17:24.156Z,1509671844.156 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T01:17:24.517Z,1509671844.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:24.531Z,1509671844.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:17:24.533Z,1509671844.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:24.605Z,1509671844.605 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:17:24.605Z,1509671844.605 [BPC1] No Fault, FailCount= 1
2017-11-03T01:17:26.078Z,1509671846.078 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:17:26.166Z,1509671846.166 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:17:26.167Z,1509671846.167 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:17:26.168Z,1509671846.168 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:17:26.168Z,1509671846.168 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:17:28.103Z,1509671848.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:28.184Z,1509671848.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:28.277Z,1509671848.277 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T01:17:28.277Z,1509671848.277 [NAL9602] No Fault, FailCount= 1
2017-11-03T01:17:28.327Z,1509671848.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:28.371Z,1509671848.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:28.722Z,1509671848.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:28.737Z,1509671848.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:29.123Z,1509671849.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:29.139Z,1509671849.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:29.520Z,1509671849.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:29.575Z,1509671849.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:29.922Z,1509671849.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:29.937Z,1509671849.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:30.312Z,1509671850.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:30.341Z,1509671850.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:30.716Z,1509671850.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:30.739Z,1509671850.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:31.115Z,1509671851.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:31.140Z,1509671851.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:31.513Z,1509671851.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:31.539Z,1509671851.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:31.912Z,1509671851.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:31.938Z,1509671851.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:32.306Z,1509671852.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:32.337Z,1509671852.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:32.713Z,1509671852.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:32.743Z,1509671852.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:33.113Z,1509671853.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:33.143Z,1509671853.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:33.508Z,1509671853.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:33.537Z,1509671853.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:33.915Z,1509671853.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:33.941Z,1509671853.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:34.309Z,1509671854.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:34.336Z,1509671854.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:34.708Z,1509671854.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:34.737Z,1509671854.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:35.112Z,1509671855.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:35.138Z,1509671855.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:35.514Z,1509671855.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:35.540Z,1509671855.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:35.914Z,1509671855.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:35.939Z,1509671855.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:36.311Z,1509671856.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:36.337Z,1509671856.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:36.712Z,1509671856.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:36.738Z,1509671856.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:37.114Z,1509671857.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:37.139Z,1509671857.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:37.513Z,1509671857.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:37.538Z,1509671857.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:37.912Z,1509671857.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:37.945Z,1509671857.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:38.311Z,1509671858.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:38.336Z,1509671858.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:38.712Z,1509671858.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:38.739Z,1509671858.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:39.112Z,1509671859.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:39.142Z,1509671859.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:39.512Z,1509671859.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:39.537Z,1509671859.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:39.912Z,1509671859.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:39.938Z,1509671859.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:40.361Z,1509671860.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:40.465Z,1509671860.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:40.712Z,1509671860.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:40.727Z,1509671860.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:41.111Z,1509671861.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:41.166Z,1509671861.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:41.515Z,1509671861.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:41.530Z,1509671861.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:41.916Z,1509671861.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:41.967Z,1509671861.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:42.319Z,1509671862.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:42.355Z,1509671862.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:42.725Z,1509671862.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:42.767Z,1509671862.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:43.117Z,1509671863.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:43.163Z,1509671863.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:43.512Z,1509671863.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:43.528Z,1509671863.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:43.917Z,1509671863.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:43.932Z,1509671863.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:44.316Z,1509671864.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:44.331Z,1509671864.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:44.727Z,1509671864.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:44.756Z,1509671864.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:45.117Z,1509671865.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:45.132Z,1509671865.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:45.511Z,1509671865.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:45.526Z,1509671865.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:45.919Z,1509671865.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:45.935Z,1509671865.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:46.323Z,1509671866.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:46.338Z,1509671866.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:46.712Z,1509671866.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:46.727Z,1509671866.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:47.111Z,1509671867.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:47.127Z,1509671867.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:47.515Z,1509671867.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:47.530Z,1509671867.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:47.911Z,1509671867.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:47.926Z,1509671867.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:48.322Z,1509671868.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:48.363Z,1509671868.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:48.715Z,1509671868.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:48.731Z,1509671868.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:49.111Z,1509671869.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:49.125Z,1509671869.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:49.511Z,1509671869.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:49.526Z,1509671869.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:49.915Z,1509671869.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:49.930Z,1509671869.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:50.319Z,1509671870.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:50.335Z,1509671870.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:50.711Z,1509671870.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:50.726Z,1509671870.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:51.111Z,1509671871.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:51.135Z,1509671871.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:51.518Z,1509671871.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:51.533Z,1509671871.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:51.915Z,1509671871.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:51.931Z,1509671871.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:52.322Z,1509671872.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:52.359Z,1509671872.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:52.715Z,1509671872.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:52.730Z,1509671872.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:53.116Z,1509671873.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:53.131Z,1509671873.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:53.515Z,1509671873.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:53.530Z,1509671873.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:53.917Z,1509671873.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:53.932Z,1509671873.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:54.299Z,1509671874.299 [NAL9602](INFO): Powering up NAL9602
2017-11-03T01:17:54.326Z,1509671874.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:54.382Z,1509671874.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:54.714Z,1509671874.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:54.786Z,1509671874.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:55.108Z,1509671875.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:55.133Z,1509671875.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:55.508Z,1509671875.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:55.539Z,1509671875.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:55.920Z,1509671875.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:55.938Z,1509671875.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:56.312Z,1509671876.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:56.337Z,1509671876.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:56.710Z,1509671876.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:56.744Z,1509671876.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:57.122Z,1509671877.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:57.143Z,1509671877.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:57.509Z,1509671877.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:57.534Z,1509671877.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:57.924Z,1509671877.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:57.939Z,1509671877.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:58.322Z,1509671878.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:58.330Z,1509671878.330 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:17:58.330Z,1509671878.330 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:17:58.330Z,1509671878.330 [BPC1](ERROR): Communications Fault
2017-11-03T01:17:58.338Z,1509671878.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:58.413Z,1509671878.413 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:17:58.711Z,1509671878.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:58.743Z,1509671878.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:59.115Z,1509671879.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:59.141Z,1509671879.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:59.512Z,1509671879.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:59.538Z,1509671879.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:17:59.625Z,1509671879.625 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:17:59.625Z,1509671879.625 [BPC1] No Fault, FailCount= 1
2017-11-03T01:17:59.914Z,1509671879.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:17:59.991Z,1509671879.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:00.310Z,1509671880.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:00.337Z,1509671880.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:00.712Z,1509671880.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:00.743Z,1509671880.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:01.114Z,1509671881.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:01.146Z,1509671881.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:01.514Z,1509671881.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:01.541Z,1509671881.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:01.914Z,1509671881.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:01.947Z,1509671881.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:02.310Z,1509671882.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:02.336Z,1509671882.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:02.714Z,1509671882.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:02.741Z,1509671882.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:02.741Z,1509671882.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2017-11-03T01:18:02.741Z,1509671882.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:18:02.742Z,1509671882.742 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:02.743Z,1509671882.743 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2017-11-03T01:18:02.743Z,1509671882.743 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:18:02.745Z,1509671882.745 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:02.745Z,1509671882.745 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2017-11-03T01:18:02.745Z,1509671882.745 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:18:02.825Z,1509671882.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:18:02.825Z,1509671882.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:18:02.825Z,1509671882.825 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:18:03.110Z,1509671883.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:03.229Z,1509671883.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:18:03.229Z,1509671883.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2017-11-03T01:18:03.229Z,1509671883.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:18:03.229Z,1509671883.229 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2017-11-03T01:18:03.230Z,1509671883.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:18:03.230Z,1509671883.230 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2017-11-03T01:18:03.514Z,1509671883.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:03.538Z,1509671883.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:18:03.539Z,1509671883.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:18:03.539Z,1509671883.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:18:03.539Z,1509671883.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:18:03.540Z,1509671883.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:18:03.540Z,1509671883.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:18:03.541Z,1509671883.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:18:03.541Z,1509671883.541 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:18:03.541Z,1509671883.541 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:18:03.910Z,1509671883.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:03.959Z,1509671883.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:04.310Z,1509671884.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:04.346Z,1509671884.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:04.708Z,1509671884.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:04.723Z,1509671884.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:05.134Z,1509671885.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:05.149Z,1509671885.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:05.496Z,1509671885.496 [NAL9602](INFO): NAL9602 initialized
2017-11-03T01:18:05.513Z,1509671885.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:05.544Z,1509671885.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:05.908Z,1509671885.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:05.923Z,1509671885.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:06.325Z,1509671886.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:06.351Z,1509671886.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:06.725Z,1509671886.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:06.759Z,1509671886.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:07.108Z,1509671887.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:07.123Z,1509671887.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:07.509Z,1509671887.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:07.523Z,1509671887.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:07.915Z,1509671887.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:07.949Z,1509671887.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:08.323Z,1509671888.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:08.408Z,1509671888.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:08.708Z,1509671888.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:08.723Z,1509671888.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:09.138Z,1509671889.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:09.153Z,1509671889.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:09.521Z,1509671889.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:09.549Z,1509671889.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:09.925Z,1509671889.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:09.951Z,1509671889.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:10.315Z,1509671890.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:10.350Z,1509671890.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:10.717Z,1509671890.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:10.748Z,1509671890.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:11.116Z,1509671891.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:11.147Z,1509671891.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:11.515Z,1509671891.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:11.553Z,1509671891.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:11.929Z,1509671891.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:11.958Z,1509671891.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:12.340Z,1509671892.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:12.355Z,1509671892.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:12.748Z,1509671892.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:12.770Z,1509671892.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:13.112Z,1509671893.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:13.127Z,1509671893.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:13.519Z,1509671893.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:13.553Z,1509671893.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:13.919Z,1509671893.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:13.952Z,1509671893.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:14.323Z,1509671894.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:14.352Z,1509671894.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:14.715Z,1509671894.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:14.755Z,1509671894.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:15.125Z,1509671895.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:15.157Z,1509671895.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:15.521Z,1509671895.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:15.555Z,1509671895.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:15.925Z,1509671895.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:15.957Z,1509671895.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:16.316Z,1509671896.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:16.371Z,1509671896.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:16.719Z,1509671896.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:16.758Z,1509671896.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:17.113Z,1509671897.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:17.166Z,1509671897.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:17.519Z,1509671897.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:17.575Z,1509671897.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:17.925Z,1509671897.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:17.956Z,1509671897.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:18.348Z,1509671898.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:18.363Z,1509671898.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:18.733Z,1509671898.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:18.763Z,1509671898.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:19.112Z,1509671899.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:19.126Z,1509671899.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:19.513Z,1509671899.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:19.528Z,1509671899.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:19.912Z,1509671899.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:19.927Z,1509671899.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:20.316Z,1509671900.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:20.335Z,1509671900.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:20.713Z,1509671900.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:20.728Z,1509671900.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:21.126Z,1509671901.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:21.157Z,1509671901.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:21.525Z,1509671901.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:21.556Z,1509671901.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:21.924Z,1509671901.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:21.955Z,1509671901.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:22.327Z,1509671902.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:22.386Z,1509671902.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:22.716Z,1509671902.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:22.731Z,1509671902.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:23.120Z,1509671903.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:23.135Z,1509671903.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:23.512Z,1509671903.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:23.528Z,1509671903.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:23.930Z,1509671903.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:23.961Z,1509671903.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:24.325Z,1509671904.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:24.353Z,1509671904.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:24.734Z,1509671904.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:24.764Z,1509671904.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:27.964Z,1509671907.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:27.980Z,1509671907.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:28.144Z,1509671908.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:28.238Z,1509671908.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:28.534Z,1509671908.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:28.564Z,1509671908.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:28.937Z,1509671908.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:28.963Z,1509671908.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:29.330Z,1509671909.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:29.364Z,1509671909.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:29.720Z,1509671909.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:29.782Z,1509671909.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:30.147Z,1509671910.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:30.175Z,1509671910.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:30.525Z,1509671910.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:30.571Z,1509671910.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:30.934Z,1509671910.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:30.968Z,1509671910.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:31.333Z,1509671911.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:31.375Z,1509671911.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:31.726Z,1509671911.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:31.779Z,1509671911.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:32.138Z,1509671912.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:32.183Z,1509671912.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:32.520Z,1509671912.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:32.535Z,1509671912.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:32.920Z,1509671912.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:32.943Z,1509671912.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:33.321Z,1509671913.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:33.336Z,1509671913.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:33.720Z,1509671913.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:33.734Z,1509671913.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:34.156Z,1509671914.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:34.191Z,1509671914.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:34.530Z,1509671914.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:34.545Z,1509671914.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:34.926Z,1509671914.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:34.940Z,1509671914.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:35.321Z,1509671915.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:35.336Z,1509671915.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:35.723Z,1509671915.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:35.741Z,1509671915.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:36.125Z,1509671916.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:36.139Z,1509671916.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:36.531Z,1509671916.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:36.546Z,1509671916.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:36.930Z,1509671916.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:36.945Z,1509671916.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:37.337Z,1509671917.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:37.368Z,1509671917.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:37.730Z,1509671917.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:37.745Z,1509671917.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:38.125Z,1509671918.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:38.140Z,1509671918.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:38.524Z,1509671918.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:38.538Z,1509671918.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:38.921Z,1509671918.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:38.936Z,1509671918.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:39.325Z,1509671919.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:39.340Z,1509671919.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:39.725Z,1509671919.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:39.740Z,1509671919.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:40.130Z,1509671920.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:40.145Z,1509671920.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:40.537Z,1509671920.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:40.568Z,1509671920.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:40.934Z,1509671920.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:40.965Z,1509671920.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:41.331Z,1509671921.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:41.346Z,1509671921.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:41.720Z,1509671921.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:41.746Z,1509671921.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:42.152Z,1509671922.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:42.208Z,1509671922.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:42.531Z,1509671922.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:42.547Z,1509671922.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:42.940Z,1509671922.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:42.955Z,1509671922.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:43.344Z,1509671923.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:43.366Z,1509671923.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:43.740Z,1509671923.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:43.795Z,1509671923.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:44.140Z,1509671924.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:44.176Z,1509671924.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:44.525Z,1509671924.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:44.540Z,1509671924.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:44.920Z,1509671924.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:44.970Z,1509671924.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:45.324Z,1509671925.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:45.339Z,1509671925.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:45.722Z,1509671925.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:45.764Z,1509671925.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:46.172Z,1509671926.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:46.231Z,1509671926.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:46.531Z,1509671926.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:46.567Z,1509671926.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:46.931Z,1509671926.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:46.966Z,1509671926.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:47.320Z,1509671927.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:47.339Z,1509671927.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:47.724Z,1509671927.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:47.739Z,1509671927.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:48.131Z,1509671928.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:48.186Z,1509671928.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:48.523Z,1509671928.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:48.541Z,1509671928.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:48.930Z,1509671928.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:48.967Z,1509671928.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:49.325Z,1509671929.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:49.340Z,1509671929.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:49.726Z,1509671929.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:49.741Z,1509671929.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:50.124Z,1509671930.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:50.138Z,1509671930.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:50.524Z,1509671930.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:50.539Z,1509671930.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:50.921Z,1509671930.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:50.936Z,1509671930.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:51.324Z,1509671931.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:51.339Z,1509671931.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:51.724Z,1509671931.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:51.739Z,1509671931.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:52.126Z,1509671932.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:52.141Z,1509671932.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:52.537Z,1509671932.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:52.566Z,1509671932.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:52.930Z,1509671932.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:52.950Z,1509671932.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:53.325Z,1509671933.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:53.340Z,1509671933.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:53.725Z,1509671933.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:53.740Z,1509671933.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:54.123Z,1509671934.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:54.137Z,1509671934.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:54.527Z,1509671934.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:54.547Z,1509671934.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:54.930Z,1509671934.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:54.945Z,1509671934.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:55.333Z,1509671935.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:55.348Z,1509671935.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:55.730Z,1509671935.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:55.745Z,1509671935.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:56.149Z,1509671936.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:56.180Z,1509671936.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:56.527Z,1509671936.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:56.590Z,1509671936.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:56.926Z,1509671936.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:56.941Z,1509671936.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:57.327Z,1509671937.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:57.342Z,1509671937.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:57.727Z,1509671937.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:57.742Z,1509671937.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:58.154Z,1509671938.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:58.183Z,1509671938.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:58.531Z,1509671938.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:58.594Z,1509671938.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:58.933Z,1509671938.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:58.954Z,1509671938.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:59.320Z,1509671939.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:59.382Z,1509671939.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:18:59.725Z,1509671939.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:18:59.740Z,1509671939.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:00.152Z,1509671940.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:00.227Z,1509671940.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:00.525Z,1509671940.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:00.578Z,1509671940.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:00.933Z,1509671940.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:00.951Z,1509671940.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:01.332Z,1509671941.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:01.347Z,1509671941.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:01.732Z,1509671941.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:01.747Z,1509671941.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:02.150Z,1509671942.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:02.217Z,1509671942.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:02.525Z,1509671942.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:02.548Z,1509671942.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:02.927Z,1509671942.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:02.947Z,1509671942.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:03.326Z,1509671943.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:03.340Z,1509671943.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:03.727Z,1509671943.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:03.746Z,1509671943.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:04.134Z,1509671944.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:04.149Z,1509671944.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:04.537Z,1509671944.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:04.553Z,1509671944.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:04.941Z,1509671944.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:04.957Z,1509671944.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:05.326Z,1509671945.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:05.341Z,1509671945.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:05.724Z,1509671945.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:05.747Z,1509671945.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:06.129Z,1509671946.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:06.151Z,1509671946.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:06.512Z,1509671946.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:06.539Z,1509671946.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:06.928Z,1509671946.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:06.955Z,1509671946.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:07.341Z,1509671947.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:07.356Z,1509671947.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:07.737Z,1509671947.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:07.752Z,1509671947.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:08.111Z,1509671948.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:08.142Z,1509671948.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:08.517Z,1509671948.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:08.543Z,1509671948.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:08.936Z,1509671948.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:08.951Z,1509671948.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:09.318Z,1509671949.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:09.344Z,1509671949.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:09.717Z,1509671949.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:09.744Z,1509671949.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:10.151Z,1509671950.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:10.169Z,1509671950.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:10.539Z,1509671950.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:10.554Z,1509671950.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:10.943Z,1509671950.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:11.002Z,1509671951.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:11.319Z,1509671951.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:11.356Z,1509671951.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:11.716Z,1509671951.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:11.731Z,1509671951.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:12.150Z,1509671952.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:12.175Z,1509671952.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:12.517Z,1509671952.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:12.532Z,1509671952.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:12.930Z,1509671952.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:12.983Z,1509671952.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:13.330Z,1509671953.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:13.357Z,1509671953.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:13.730Z,1509671953.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:13.799Z,1509671953.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:14.161Z,1509671954.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:14.180Z,1509671954.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:14.524Z,1509671954.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:14.575Z,1509671954.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:14.919Z,1509671954.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:14.967Z,1509671954.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:15.328Z,1509671955.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:15.370Z,1509671955.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:15.717Z,1509671955.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:15.732Z,1509671955.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:16.163Z,1509671956.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:16.211Z,1509671956.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:16.530Z,1509671956.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:16.556Z,1509671956.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:16.930Z,1509671956.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:16.957Z,1509671956.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:17.319Z,1509671957.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:17.359Z,1509671957.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:17.719Z,1509671957.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:17.733Z,1509671957.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:18.118Z,1509671958.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:18.133Z,1509671958.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:18.527Z,1509671958.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:18.557Z,1509671958.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:18.930Z,1509671958.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:18.957Z,1509671958.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:19.326Z,1509671959.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:19.361Z,1509671959.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:19.738Z,1509671959.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:19.767Z,1509671959.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:20.124Z,1509671960.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:20.139Z,1509671960.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:20.517Z,1509671960.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:20.532Z,1509671960.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:20.924Z,1509671960.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:20.939Z,1509671960.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:21.320Z,1509671961.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:21.336Z,1509671961.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:21.720Z,1509671961.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:21.736Z,1509671961.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:22.131Z,1509671962.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:22.160Z,1509671962.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:22.256Z,1509671962.256 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:19:22.256Z,1509671962.256 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T01:19:22.257Z,1509671962.257 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:19:22.534Z,1509671962.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:22.559Z,1509671962.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:19:22.560Z,1509671962.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:22.661Z,1509671962.661 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:19:22.685Z,1509671962.685 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:19:22.798Z,1509671962.798 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:19:22.947Z,1509671962.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:22.963Z,1509671962.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:19:22.964Z,1509671962.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:23.317Z,1509671963.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:23.345Z,1509671963.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:19:23.346Z,1509671963.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:23.717Z,1509671963.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:23.751Z,1509671963.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:19:23.752Z,1509671963.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:24.118Z,1509671964.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:24.145Z,1509671964.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:19:24.146Z,1509671964.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:24.237Z,1509671964.237 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:19:24.237Z,1509671964.237 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T01:19:24.412Z,1509671964.412 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:19:24.413Z,1509671964.413 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:19:24.413Z,1509671964.413 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:19:24.413Z,1509671964.413 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:19:24.517Z,1509671964.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:24.548Z,1509671964.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:19:24.554Z,1509671964.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:24.943Z,1509671964.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:24.960Z,1509671964.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:19:24.961Z,1509671964.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:28.073Z,1509671968.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:28.171Z,1509671968.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:19:28.172Z,1509671968.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:28.322Z,1509671968.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:28.354Z,1509671968.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T01:19:28.355Z,1509671968.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:28.539Z,1509671968.539 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:19:28.597Z,1509671968.597 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:19:28.598Z,1509671968.598 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:19:28.599Z,1509671968.599 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:19:28.599Z,1509671968.599 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:19:28.715Z,1509671968.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:28.758Z,1509671968.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T01:19:28.759Z,1509671968.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:29.112Z,1509671969.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:29.166Z,1509671969.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:29.508Z,1509671969.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:29.523Z,1509671969.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:29.921Z,1509671969.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:29.967Z,1509671969.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:30.321Z,1509671970.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:30.367Z,1509671970.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:30.714Z,1509671970.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:30.729Z,1509671970.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:31.108Z,1509671971.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:31.123Z,1509671971.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:31.512Z,1509671971.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:31.528Z,1509671971.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:31.908Z,1509671971.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:31.927Z,1509671971.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:32.308Z,1509671972.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:32.323Z,1509671972.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:32.708Z,1509671972.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:32.723Z,1509671972.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:33.121Z,1509671973.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:33.153Z,1509671973.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:33.525Z,1509671973.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:33.549Z,1509671973.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:33.921Z,1509671973.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:33.952Z,1509671973.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:34.308Z,1509671974.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:34.323Z,1509671974.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:34.713Z,1509671974.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:34.728Z,1509671974.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:35.122Z,1509671975.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:35.154Z,1509671975.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:35.514Z,1509671975.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:35.579Z,1509671975.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:35.922Z,1509671975.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:35.937Z,1509671975.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:36.325Z,1509671976.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:36.339Z,1509671976.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:36.724Z,1509671976.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:36.747Z,1509671976.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:37.113Z,1509671977.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:37.134Z,1509671977.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:37.516Z,1509671977.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:37.531Z,1509671977.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:37.913Z,1509671977.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:37.929Z,1509671977.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:38.310Z,1509671978.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:38.331Z,1509671978.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:38.717Z,1509671978.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:38.733Z,1509671978.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:39.125Z,1509671979.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:39.140Z,1509671979.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:39.525Z,1509671979.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:39.546Z,1509671979.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:39.926Z,1509671979.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:39.947Z,1509671979.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:40.311Z,1509671980.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:40.327Z,1509671980.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:40.715Z,1509671980.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:40.735Z,1509671980.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:41.112Z,1509671981.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:41.171Z,1509671981.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:41.514Z,1509671981.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:41.530Z,1509671981.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:41.925Z,1509671981.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:41.988Z,1509671981.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:42.326Z,1509671982.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:42.342Z,1509671982.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:42.726Z,1509671982.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:42.742Z,1509671982.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:43.112Z,1509671983.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:43.170Z,1509671983.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:43.516Z,1509671983.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:43.531Z,1509671983.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:43.913Z,1509671983.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:43.974Z,1509671983.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:44.304Z,1509671984.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:44.371Z,1509671984.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:44.715Z,1509671984.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:44.730Z,1509671984.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:45.125Z,1509671985.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:45.140Z,1509671985.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:45.527Z,1509671985.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:45.550Z,1509671985.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:45.928Z,1509671985.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:45.943Z,1509671985.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:46.303Z,1509671986.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:46.331Z,1509671986.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:46.704Z,1509671986.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:46.737Z,1509671986.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:47.107Z,1509671987.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:47.133Z,1509671987.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:47.504Z,1509671987.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:47.535Z,1509671987.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:47.923Z,1509671987.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:47.942Z,1509671987.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:48.343Z,1509671988.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:48.405Z,1509671988.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:48.729Z,1509671988.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:48.744Z,1509671988.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:49.104Z,1509671989.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:49.139Z,1509671989.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:49.500Z,1509671989.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:49.535Z,1509671989.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:49.904Z,1509671989.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:49.934Z,1509671989.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:50.305Z,1509671990.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:50.332Z,1509671990.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:50.704Z,1509671990.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:50.743Z,1509671990.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:51.126Z,1509671991.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:51.141Z,1509671991.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:51.525Z,1509671991.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:51.540Z,1509671991.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:51.927Z,1509671991.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:51.946Z,1509671991.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:52.307Z,1509671992.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:52.333Z,1509671992.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:52.704Z,1509671992.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:52.739Z,1509671992.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:53.108Z,1509671993.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:53.135Z,1509671993.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:53.505Z,1509671993.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:53.532Z,1509671993.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:53.926Z,1509671993.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:53.941Z,1509671993.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:54.326Z,1509671994.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:54.341Z,1509671994.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:54.727Z,1509671994.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:54.792Z,1509671994.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:55.107Z,1509671995.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:55.134Z,1509671995.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:55.507Z,1509671995.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:55.534Z,1509671995.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:55.907Z,1509671995.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:55.939Z,1509671995.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:56.303Z,1509671996.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:56.335Z,1509671996.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:56.700Z,1509671996.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:56.755Z,1509671996.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:57.123Z,1509671997.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:57.144Z,1509671997.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:57.525Z,1509671997.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:57.540Z,1509671997.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:57.929Z,1509671997.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:57.975Z,1509671997.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:58.303Z,1509671998.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:58.338Z,1509671998.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:58.704Z,1509671998.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:58.769Z,1509671998.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:59.107Z,1509671999.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:59.174Z,1509671999.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:59.504Z,1509671999.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:59.534Z,1509671999.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:19:59.924Z,1509671999.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:19:59.939Z,1509671999.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:00.326Z,1509672000.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:00.346Z,1509672000.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:00.725Z,1509672000.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:00.740Z,1509672000.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:01.104Z,1509672001.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:01.134Z,1509672001.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:01.507Z,1509672001.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:01.532Z,1509672001.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:01.904Z,1509672001.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:01.934Z,1509672001.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:02.321Z,1509672002.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:02.387Z,1509672002.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:02.707Z,1509672002.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:02.732Z,1509672002.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:03.123Z,1509672003.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:03.143Z,1509672003.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:03.525Z,1509672003.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:03.539Z,1509672003.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:03.929Z,1509672003.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:03.944Z,1509672003.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:04.307Z,1509672004.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:04.333Z,1509672004.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:04.703Z,1509672004.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:04.733Z,1509672004.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:05.106Z,1509672005.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:05.132Z,1509672005.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:05.505Z,1509672005.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:05.534Z,1509672005.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:05.925Z,1509672005.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:05.940Z,1509672005.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:06.329Z,1509672006.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:06.350Z,1509672006.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:06.725Z,1509672006.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:06.741Z,1509672006.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:07.104Z,1509672007.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:07.134Z,1509672007.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:07.507Z,1509672007.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:07.533Z,1509672007.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:07.907Z,1509672007.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:07.932Z,1509672007.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:08.324Z,1509672008.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:08.339Z,1509672008.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:08.707Z,1509672008.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:08.733Z,1509672008.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:09.129Z,1509672009.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:09.144Z,1509672009.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:09.525Z,1509672009.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:09.591Z,1509672009.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:09.929Z,1509672009.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:09.944Z,1509672009.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:10.303Z,1509672010.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:10.334Z,1509672010.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:10.704Z,1509672010.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:10.735Z,1509672010.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:11.107Z,1509672011.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:11.151Z,1509672011.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:11.504Z,1509672011.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:11.535Z,1509672011.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:11.917Z,1509672011.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:11.943Z,1509672011.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:12.317Z,1509672012.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:12.380Z,1509672012.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:12.729Z,1509672012.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:12.744Z,1509672012.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:13.104Z,1509672013.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:13.166Z,1509672013.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:13.504Z,1509672013.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:13.556Z,1509672013.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:13.907Z,1509672013.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:13.941Z,1509672013.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:14.308Z,1509672014.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:14.341Z,1509672014.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:14.707Z,1509672014.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:14.745Z,1509672014.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:15.118Z,1509672015.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:15.144Z,1509672015.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:15.517Z,1509672015.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:15.543Z,1509672015.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:15.931Z,1509672015.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:15.946Z,1509672015.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:16.318Z,1509672016.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:16.384Z,1509672016.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:16.705Z,1509672016.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:16.720Z,1509672016.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:17.112Z,1509672017.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:17.147Z,1509672017.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:17.504Z,1509672017.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:17.519Z,1509672017.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:17.922Z,1509672017.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:17.951Z,1509672017.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:18.318Z,1509672018.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:18.343Z,1509672018.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:18.730Z,1509672018.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:18.750Z,1509672018.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:19.111Z,1509672019.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:19.143Z,1509672019.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:19.504Z,1509672019.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:19.518Z,1509672019.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:19.905Z,1509672019.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:19.920Z,1509672019.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:20.305Z,1509672020.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:20.320Z,1509672020.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:20.712Z,1509672020.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:20.751Z,1509672020.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:21.118Z,1509672021.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:21.153Z,1509672021.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:21.522Z,1509672021.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:21.552Z,1509672021.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:21.926Z,1509672021.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:21.950Z,1509672021.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:22.315Z,1509672022.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:22.354Z,1509672022.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:22.708Z,1509672022.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:22.723Z,1509672022.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:23.112Z,1509672023.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:23.154Z,1509672023.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:23.507Z,1509672023.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:23.527Z,1509672023.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:23.921Z,1509672023.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:23.952Z,1509672023.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:24.329Z,1509672024.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:24.359Z,1509672024.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:24.726Z,1509672024.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:24.750Z,1509672024.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:25.111Z,1509672025.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:25.127Z,1509672025.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:28.453Z,1509672028.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:28.519Z,1509672028.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:28.628Z,1509672028.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:28.661Z,1509672028.661 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:20:28.661Z,1509672028.661 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:20:28.661Z,1509672028.661 [BPC1](ERROR): Communications Fault
2017-11-03T01:20:28.675Z,1509672028.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:28.793Z,1509672028.793 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:20:29.049Z,1509672029.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:29.071Z,1509672029.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:29.450Z,1509672029.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:29.465Z,1509672029.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:29.848Z,1509672029.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:29.863Z,1509672029.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:29.945Z,1509672029.945 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:20:29.945Z,1509672029.945 [BPC1] No Fault, FailCount= 1
2017-11-03T01:20:30.231Z,1509672030.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:30.365Z,1509672030.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:30.631Z,1509672030.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:30.657Z,1509672030.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:31.028Z,1509672031.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:31.054Z,1509672031.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:31.429Z,1509672031.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:31.459Z,1509672031.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:31.825Z,1509672031.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:31.851Z,1509672031.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:32.248Z,1509672032.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:32.303Z,1509672032.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:32.668Z,1509672032.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:32.705Z,1509672032.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:33.054Z,1509672033.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:33.068Z,1509672033.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:33.428Z,1509672033.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:33.454Z,1509672033.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:33.828Z,1509672033.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:33.854Z,1509672033.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:34.231Z,1509672034.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:34.257Z,1509672034.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:34.666Z,1509672034.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:34.693Z,1509672034.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:35.049Z,1509672035.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:35.071Z,1509672035.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:35.437Z,1509672035.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:35.463Z,1509672035.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:35.849Z,1509672035.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:35.871Z,1509672035.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:36.239Z,1509672036.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:36.271Z,1509672036.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:36.629Z,1509672036.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:36.663Z,1509672036.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:37.027Z,1509672037.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:37.062Z,1509672037.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:37.429Z,1509672037.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:37.462Z,1509672037.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:37.826Z,1509672037.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:37.869Z,1509672037.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:38.260Z,1509672038.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:38.275Z,1509672038.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:38.641Z,1509672038.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:38.671Z,1509672038.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:39.041Z,1509672039.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:39.073Z,1509672039.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:39.431Z,1509672039.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:39.451Z,1509672039.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:39.828Z,1509672039.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:39.843Z,1509672039.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:40.236Z,1509672040.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:40.272Z,1509672040.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:40.635Z,1509672040.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:40.651Z,1509672040.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:41.045Z,1509672041.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:41.070Z,1509672041.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:41.449Z,1509672041.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:41.478Z,1509672041.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:41.845Z,1509672041.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:41.870Z,1509672041.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:42.239Z,1509672042.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:42.266Z,1509672042.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:42.630Z,1509672042.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:42.645Z,1509672042.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:43.035Z,1509672043.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:43.071Z,1509672043.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:43.434Z,1509672043.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:43.449Z,1509672043.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:43.830Z,1509672043.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:43.845Z,1509672043.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:44.245Z,1509672044.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:44.377Z,1509672044.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:44.645Z,1509672044.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:44.661Z,1509672044.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:45.042Z,1509672045.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:45.095Z,1509672045.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:45.439Z,1509672045.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:45.459Z,1509672045.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:45.837Z,1509672045.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:45.887Z,1509672045.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:46.240Z,1509672046.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:46.259Z,1509672046.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:46.662Z,1509672046.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:46.735Z,1509672046.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:47.042Z,1509672047.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:47.057Z,1509672047.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:47.442Z,1509672047.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:47.458Z,1509672047.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:47.842Z,1509672047.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:47.858Z,1509672047.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:48.236Z,1509672048.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:48.252Z,1509672048.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:48.679Z,1509672048.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:48.707Z,1509672048.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:49.039Z,1509672049.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:49.055Z,1509672049.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:49.438Z,1509672049.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:49.454Z,1509672049.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:49.840Z,1509672049.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:49.887Z,1509672049.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:50.240Z,1509672050.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:50.259Z,1509672050.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:50.642Z,1509672050.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:50.659Z,1509672050.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:51.042Z,1509672051.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:51.057Z,1509672051.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:51.438Z,1509672051.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:51.454Z,1509672051.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:51.836Z,1509672051.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:51.859Z,1509672051.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:52.236Z,1509672052.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:52.259Z,1509672052.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:52.638Z,1509672052.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:52.653Z,1509672052.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:53.041Z,1509672053.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:53.057Z,1509672053.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:53.445Z,1509672053.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:53.460Z,1509672053.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:53.842Z,1509672053.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:53.911Z,1509672053.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:54.241Z,1509672054.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:54.288Z,1509672054.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:54.637Z,1509672054.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:54.660Z,1509672054.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:55.031Z,1509672055.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:55.070Z,1509672055.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:55.430Z,1509672055.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:55.470Z,1509672055.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:55.829Z,1509672055.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:55.859Z,1509672055.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:56.256Z,1509672056.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:56.271Z,1509672056.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:56.670Z,1509672056.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:56.717Z,1509672056.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:57.055Z,1509672057.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:57.083Z,1509672057.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:57.430Z,1509672057.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:57.467Z,1509672057.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:57.863Z,1509672057.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:57.883Z,1509672057.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:58.267Z,1509672058.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:58.445Z,1509672058.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:58.629Z,1509672058.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:58.726Z,1509672058.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:59.039Z,1509672059.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:59.070Z,1509672059.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:59.452Z,1509672059.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:59.518Z,1509672059.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:20:59.840Z,1509672059.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:20:59.874Z,1509672059.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:00.229Z,1509672060.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:00.305Z,1509672060.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:00.639Z,1509672060.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:00.727Z,1509672060.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:01.032Z,1509672061.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:01.075Z,1509672061.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:01.430Z,1509672061.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:01.467Z,1509672061.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:01.829Z,1509672061.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:01.871Z,1509672061.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:02.248Z,1509672062.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:02.314Z,1509672062.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:02.696Z,1509672062.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:02.788Z,1509672062.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:03.044Z,1509672063.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:03.115Z,1509672063.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:03.429Z,1509672063.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:03.470Z,1509672063.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:03.864Z,1509672063.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:03.943Z,1509672063.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:03.943Z,1509672063.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2017-11-03T01:21:03.943Z,1509672063.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:21:03.971Z,1509672063.971 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:03.971Z,1509672063.971 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2017-11-03T01:21:03.971Z,1509672063.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:21:03.973Z,1509672063.973 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:03.973Z,1509672063.973 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2017-11-03T01:21:03.974Z,1509672063.974 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:21:04.072Z,1509672064.072 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:21:04.072Z,1509672064.072 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:21:04.073Z,1509672064.073 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:21:04.238Z,1509672064.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:04.376Z,1509672064.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:21:04.376Z,1509672064.376 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2017-11-03T01:21:04.377Z,1509672064.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:21:04.377Z,1509672064.377 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2017-11-03T01:21:04.377Z,1509672064.377 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:21:04.377Z,1509672064.377 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2017-11-03T01:21:04.635Z,1509672064.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:04.663Z,1509672064.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:21:04.663Z,1509672064.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:21:04.663Z,1509672064.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:21:04.664Z,1509672064.664 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:21:04.669Z,1509672064.669 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:21:04.669Z,1509672064.669 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:21:04.670Z,1509672064.670 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:21:04.670Z,1509672064.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:21:04.670Z,1509672064.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:21:05.047Z,1509672065.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:05.076Z,1509672065.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:05.447Z,1509672065.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:05.498Z,1509672065.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:05.848Z,1509672065.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:05.884Z,1509672065.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:06.235Z,1509672066.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:06.255Z,1509672066.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:06.631Z,1509672066.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:06.646Z,1509672066.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:07.031Z,1509672067.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:07.046Z,1509672067.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:07.432Z,1509672067.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:07.447Z,1509672067.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:07.869Z,1509672067.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:07.884Z,1509672067.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:08.246Z,1509672068.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:08.277Z,1509672068.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:08.645Z,1509672068.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:08.682Z,1509672068.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:09.045Z,1509672069.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:09.078Z,1509672069.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:09.436Z,1509672069.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:09.459Z,1509672069.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:09.832Z,1509672069.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:09.847Z,1509672069.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:10.233Z,1509672070.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:10.247Z,1509672070.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:10.632Z,1509672070.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:10.647Z,1509672070.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:11.045Z,1509672071.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:11.077Z,1509672071.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:11.437Z,1509672071.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:11.452Z,1509672071.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:11.850Z,1509672071.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:11.879Z,1509672071.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:12.236Z,1509672072.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:12.251Z,1509672072.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:12.636Z,1509672072.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:12.730Z,1509672072.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:13.039Z,1509672073.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:13.055Z,1509672073.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:13.437Z,1509672073.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:13.452Z,1509672073.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:13.841Z,1509672073.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:13.911Z,1509672073.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:14.242Z,1509672074.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:14.257Z,1509672074.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:14.661Z,1509672074.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:14.735Z,1509672074.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:15.044Z,1509672075.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:15.091Z,1509672075.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:15.438Z,1509672075.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:15.453Z,1509672075.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:15.839Z,1509672075.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:15.859Z,1509672075.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:16.239Z,1509672076.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:16.254Z,1509672076.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:16.663Z,1509672076.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:16.695Z,1509672076.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:17.040Z,1509672077.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:17.055Z,1509672077.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:17.457Z,1509672077.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:17.482Z,1509672077.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:17.842Z,1509672077.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:17.857Z,1509672077.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:18.235Z,1509672078.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:18.250Z,1509672078.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:18.638Z,1509672078.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:18.653Z,1509672078.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:19.033Z,1509672079.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:19.049Z,1509672079.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:19.437Z,1509672079.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:19.452Z,1509672079.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:19.838Z,1509672079.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:19.853Z,1509672079.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:20.241Z,1509672080.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:20.257Z,1509672080.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:20.641Z,1509672080.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:20.656Z,1509672080.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:21.041Z,1509672081.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:21.055Z,1509672081.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:21.437Z,1509672081.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:21.452Z,1509672081.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:21.834Z,1509672081.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:21.849Z,1509672081.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:22.239Z,1509672082.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:22.255Z,1509672082.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:22.640Z,1509672082.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:22.655Z,1509672082.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:23.042Z,1509672083.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:23.057Z,1509672083.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:23.445Z,1509672083.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:23.459Z,1509672083.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:23.842Z,1509672083.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:23.857Z,1509672083.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:24.241Z,1509672084.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:24.256Z,1509672084.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:24.639Z,1509672084.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:24.654Z,1509672084.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:24.976Z,1509672084.976 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:21:24.976Z,1509672084.976 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T01:21:24.976Z,1509672084.976 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:21:25.049Z,1509672085.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:25.075Z,1509672085.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:21:25.077Z,1509672085.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:25.153Z,1509672085.153 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:21:25.380Z,1509672085.380 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:21:25.452Z,1509672085.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:25.489Z,1509672085.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:21:25.490Z,1509672085.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:25.605Z,1509672085.605 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:21:28.566Z,1509672088.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:28.660Z,1509672088.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:21:28.661Z,1509672088.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:28.745Z,1509672088.745 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:21:28.745Z,1509672088.745 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T01:21:28.810Z,1509672088.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:28.836Z,1509672088.836 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:21:28.837Z,1509672088.837 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:21:28.837Z,1509672088.837 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:21:28.837Z,1509672088.837 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:21:28.858Z,1509672088.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T01:21:28.859Z,1509672088.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:29.201Z,1509672089.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:29.259Z,1509672089.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T01:21:29.261Z,1509672089.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:29.602Z,1509672089.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:29.622Z,1509672089.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T01:21:29.623Z,1509672089.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:29.983Z,1509672089.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:30.037Z,1509672090.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T01:21:30.039Z,1509672090.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:30.384Z,1509672090.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:30.435Z,1509672090.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T01:21:30.437Z,1509672090.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:30.783Z,1509672090.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:30.813Z,1509672090.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T01:21:30.814Z,1509672090.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:31.202Z,1509672091.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:31.216Z,1509672091.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T01:21:31.217Z,1509672091.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:31.602Z,1509672091.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:31.617Z,1509672091.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T01:21:31.618Z,1509672091.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:32.005Z,1509672092.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:32.020Z,1509672092.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T01:21:32.021Z,1509672092.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:32.383Z,1509672092.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:32.414Z,1509672092.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T01:21:32.415Z,1509672092.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:32.780Z,1509672092.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:32.811Z,1509672092.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T01:21:32.812Z,1509672092.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:32.981Z,1509672092.981 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:21:33.039Z,1509672093.039 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:21:33.040Z,1509672093.040 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:21:33.041Z,1509672093.041 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:21:33.041Z,1509672093.041 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:21:33.182Z,1509672093.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:33.223Z,1509672093.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T01:21:33.224Z,1509672093.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:33.581Z,1509672093.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:33.613Z,1509672093.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:33.993Z,1509672093.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:34.019Z,1509672094.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:34.394Z,1509672094.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:34.420Z,1509672094.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:34.790Z,1509672094.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:34.822Z,1509672094.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:35.180Z,1509672095.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:35.196Z,1509672095.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:35.581Z,1509672095.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:35.596Z,1509672095.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:35.985Z,1509672095.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:36.001Z,1509672096.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:36.388Z,1509672096.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:36.403Z,1509672096.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:36.780Z,1509672096.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:36.795Z,1509672096.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:37.193Z,1509672097.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:37.225Z,1509672097.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:37.601Z,1509672097.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:37.631Z,1509672097.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:37.997Z,1509672097.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:38.032Z,1509672098.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:38.386Z,1509672098.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:38.401Z,1509672098.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:38.789Z,1509672098.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:38.804Z,1509672098.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:38.917Z,1509672098.917 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T01:21:39.186Z,1509672099.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:39.202Z,1509672099.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:39.585Z,1509672099.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:39.607Z,1509672099.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:40.045Z,1509672100.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:40.109Z,1509672100.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:40.398Z,1509672100.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:40.434Z,1509672100.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:40.798Z,1509672100.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:40.833Z,1509672100.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:41.184Z,1509672101.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:41.199Z,1509672101.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:41.589Z,1509672101.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:41.604Z,1509672101.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:41.983Z,1509672101.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:41.998Z,1509672101.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:42.388Z,1509672102.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:42.456Z,1509672102.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:42.791Z,1509672102.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:42.844Z,1509672102.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:43.196Z,1509672103.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:43.211Z,1509672103.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:43.596Z,1509672103.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:43.650Z,1509672103.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:43.998Z,1509672103.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:44.012Z,1509672104.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:44.385Z,1509672104.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:44.445Z,1509672104.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:44.791Z,1509672104.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:44.843Z,1509672104.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:45.189Z,1509672105.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:45.211Z,1509672105.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:45.585Z,1509672105.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:45.607Z,1509672105.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:45.000Z,1509672106.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:46.015Z,1509672106.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:46.400Z,1509672106.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:46.415Z,1509672106.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:46.801Z,1509672106.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:46.817Z,1509672106.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:47.179Z,1509672107.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:47.211Z,1509672107.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:47.576Z,1509672107.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:47.606Z,1509672107.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:47.976Z,1509672107.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:48.006Z,1509672108.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:48.383Z,1509672108.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:48.408Z,1509672108.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:48.776Z,1509672108.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:48.806Z,1509672108.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:49.201Z,1509672109.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:49.216Z,1509672109.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:49.601Z,1509672109.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:49.616Z,1509672109.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:50.005Z,1509672110.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:50.019Z,1509672110.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:50.376Z,1509672110.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:50.406Z,1509672110.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:50.783Z,1509672110.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:50.808Z,1509672110.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:51.203Z,1509672111.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:51.257Z,1509672111.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:51.577Z,1509672111.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:51.611Z,1509672111.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:52.001Z,1509672112.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:52.016Z,1509672112.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:52.402Z,1509672112.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:52.417Z,1509672112.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:52.812Z,1509672112.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:52.833Z,1509672112.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:53.181Z,1509672113.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:53.210Z,1509672113.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:53.580Z,1509672113.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:53.607Z,1509672113.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:53.984Z,1509672113.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:54.010Z,1509672114.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:54.383Z,1509672114.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:54.410Z,1509672114.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:54.781Z,1509672114.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:54.809Z,1509672114.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:55.202Z,1509672115.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:55.217Z,1509672115.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:55.637Z,1509672115.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:55.678Z,1509672115.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:56.001Z,1509672116.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:56.033Z,1509672116.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:56.387Z,1509672116.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:56.407Z,1509672116.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:56.788Z,1509672116.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:56.880Z,1509672116.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:57.190Z,1509672117.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:57.204Z,1509672117.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:57.610Z,1509672117.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:57.699Z,1509672117.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:57.994Z,1509672117.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:58.033Z,1509672118.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:58.392Z,1509672118.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:58.432Z,1509672118.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:58.793Z,1509672118.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:58.879Z,1509672118.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:59.186Z,1509672119.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:59.206Z,1509672119.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:59.589Z,1509672119.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:21:59.636Z,1509672119.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:21:59.990Z,1509672119.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:00.005Z,1509672120.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:00.390Z,1509672120.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:00.405Z,1509672120.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:00.785Z,1509672120.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:00.800Z,1509672120.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:01.194Z,1509672121.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:01.209Z,1509672121.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:01.598Z,1509672121.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:01.613Z,1509672121.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:01.994Z,1509672121.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:02.009Z,1509672122.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:02.385Z,1509672122.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:02.400Z,1509672122.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:02.789Z,1509672122.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:02.804Z,1509672122.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:03.194Z,1509672123.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:03.215Z,1509672123.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:03.589Z,1509672123.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:03.604Z,1509672123.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:03.994Z,1509672123.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:04.009Z,1509672124.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:04.395Z,1509672124.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:04.430Z,1509672124.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:04.792Z,1509672124.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:04.807Z,1509672124.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:05.201Z,1509672125.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:05.262Z,1509672125.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:05.589Z,1509672125.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:05.610Z,1509672125.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:05.984Z,1509672125.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:06.007Z,1509672126.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:06.390Z,1509672126.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:06.405Z,1509672126.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:06.791Z,1509672126.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:06.811Z,1509672126.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:07.194Z,1509672127.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:07.209Z,1509672127.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:07.594Z,1509672127.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:07.609Z,1509672127.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:07.998Z,1509672127.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:08.013Z,1509672128.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:08.390Z,1509672128.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:08.405Z,1509672128.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:08.790Z,1509672128.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:08.805Z,1509672128.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:09.192Z,1509672129.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:09.215Z,1509672129.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:09.584Z,1509672129.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:09.665Z,1509672129.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:09.996Z,1509672129.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:10.004Z,1509672130.004 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T01:22:10.004Z,1509672130.004 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:22:10.004Z,1509672130.004 [BPC1](ERROR): Data Fault
2017-11-03T01:22:10.012Z,1509672130.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:10.129Z,1509672130.129 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:22:10.396Z,1509672130.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:10.411Z,1509672130.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:10.796Z,1509672130.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:10.819Z,1509672130.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:11.190Z,1509672131.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:11.205Z,1509672131.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:11.288Z,1509672131.288 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:22:11.288Z,1509672131.288 [BPC1] No Fault, FailCount= 1
2017-11-03T01:22:11.591Z,1509672131.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:11.742Z,1509672131.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:11.991Z,1509672131.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:12.040Z,1509672132.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:12.389Z,1509672132.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:12.446Z,1509672132.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:12.786Z,1509672132.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:12.801Z,1509672132.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:13.196Z,1509672133.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:13.219Z,1509672133.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:13.597Z,1509672133.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:13.612Z,1509672133.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:13.998Z,1509672133.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:14.013Z,1509672134.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:14.392Z,1509672134.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:14.407Z,1509672134.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:14.789Z,1509672134.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:14.806Z,1509672134.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:15.191Z,1509672135.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:15.215Z,1509672135.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:15.588Z,1509672135.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:15.607Z,1509672135.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:16.001Z,1509672136.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:16.016Z,1509672136.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:16.399Z,1509672136.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:16.415Z,1509672136.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:16.801Z,1509672136.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:16.816Z,1509672136.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:17.198Z,1509672137.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:17.217Z,1509672137.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:17.586Z,1509672137.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:17.602Z,1509672137.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:17.988Z,1509672137.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:18.005Z,1509672138.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:18.389Z,1509672138.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:18.406Z,1509672138.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:18.773Z,1509672138.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:18.799Z,1509672138.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:19.215Z,1509672139.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:19.253Z,1509672139.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:19.600Z,1509672139.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:19.615Z,1509672139.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:20.001Z,1509672140.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:20.041Z,1509672140.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:20.392Z,1509672140.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:20.407Z,1509672140.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:20.794Z,1509672140.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:20.814Z,1509672140.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:21.193Z,1509672141.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:21.214Z,1509672141.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:21.582Z,1509672141.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:21.609Z,1509672141.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:22.000Z,1509672142.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:22.015Z,1509672142.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:22.401Z,1509672142.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:22.422Z,1509672142.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:22.800Z,1509672142.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:22.823Z,1509672142.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:23.188Z,1509672143.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:23.197Z,1509672143.197 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:22:23.197Z,1509672143.197 [BPC1] Data Fault, FailCount= 2
2017-11-03T01:22:23.197Z,1509672143.197 [BPC1](ERROR): Data Fault
2017-11-03T01:22:23.211Z,1509672143.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:23.308Z,1509672143.308 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:22:23.599Z,1509672143.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:23.699Z,1509672143.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:23.989Z,1509672143.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:24.009Z,1509672144.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:24.394Z,1509672144.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:24.409Z,1509672144.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:24.413Z,1509672144.413 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T01:17:24.2Z
2017-11-03T01:22:24.413Z,1509672144.413 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T01:22:24.413Z,1509672144.413 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T01:22:24.485Z,1509672144.485 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:22:24.485Z,1509672144.485 [BPC1] No Fault, FailCount= 2
2017-11-03T01:22:24.775Z,1509672144.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:24.847Z,1509672144.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:25.306Z,1509672145.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:25.321Z,1509672145.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:25.619Z,1509672145.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:25.702Z,1509672145.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:28.850Z,1509672148.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:28.857Z,1509672148.857 [PNI_TCM](ERROR): CRC does not match. Expected:0x24188 got:0x2589
2017-11-03T01:22:28.857Z,1509672148.857 [PNI_TCM](ERROR): CRC does not match. Expected:0x6034 got:0x1821
2017-11-03T01:22:28.857Z,1509672148.857 [PNI_TCM](ERROR): CRC does not match. Expected:0x32737 got:0x46621
2017-11-03T01:22:28.858Z,1509672148.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x46504 got:0x19741
2017-11-03T01:22:28.858Z,1509672148.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x47123 got:0x60445
2017-11-03T01:22:28.858Z,1509672148.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x15148 got:0x38429
2017-11-03T01:22:28.859Z,1509672148.859 [PNI_TCM](ERROR): CRC does not match. Expected:0x28286 got:0x20765
2017-11-03T01:22:28.859Z,1509672148.859 [PNI_TCM](ERROR): CRC does not match. Expected:0x2391 got:0x16157
2017-11-03T01:22:28.879Z,1509672148.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:29.033Z,1509672149.033 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0028.lzma
2017-11-03T01:22:29.100Z,1509672149.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:29.159Z,1509672149.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:29.460Z,1509672149.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:29.475Z,1509672149.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:29.835Z,1509672149.835 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0028.lzma.bak
2017-11-03T01:22:29.835Z,1509672149.835 [DataOverHttps](INFO): SBD MOMSN=5182370
2017-11-03T01:22:29.870Z,1509672149.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:29.893Z,1509672149.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:30.456Z,1509672150.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:30.471Z,1509672150.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:30.661Z,1509672150.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:30.706Z,1509672150.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:34.004Z,1509672154.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:34.019Z,1509672154.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:34.165Z,1509672154.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:34.181Z,1509672154.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:34.561Z,1509672154.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:34.577Z,1509672154.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:34.959Z,1509672154.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:34.974Z,1509672154.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:35.384Z,1509672155.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:35.415Z,1509672155.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:35.757Z,1509672155.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:35.772Z,1509672155.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:38.978Z,1509672158.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:39.071Z,1509672159.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:39.173Z,1509672159.173 [DataOverHttps](INFO): Sending 222 bytes from file Logs/20171103T001125/Express0029.lzma
2017-11-03T01:22:39.224Z,1509672159.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:39.243Z,1509672159.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:39.633Z,1509672159.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:39.678Z,1509672159.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:39.975Z,1509672159.975 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0029.lzma.bak
2017-11-03T01:22:39.975Z,1509672159.975 [DataOverHttps](INFO): SBD MOMSN=5182372
2017-11-03T01:22:40.013Z,1509672160.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:40.075Z,1509672160.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:40.593Z,1509672160.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:40.617Z,1509672160.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:40.620Z,1509672160.620 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T01:22:40.620Z,1509672160.620 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T01:22:40.620Z,1509672160.620 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T01:22:40.795Z,1509672160.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:40.862Z,1509672160.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:43.992Z,1509672163.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:44.039Z,1509672164.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:44.210Z,1509672164.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:44.231Z,1509672164.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:44.605Z,1509672164.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:44.621Z,1509672164.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:44.987Z,1509672164.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:45.018Z,1509672165.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:45.384Z,1509672165.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:45.407Z,1509672165.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:45.784Z,1509672165.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:45.800Z,1509672165.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:46.201Z,1509672166.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:46.226Z,1509672166.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:46.593Z,1509672166.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:46.620Z,1509672166.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:46.998Z,1509672166.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:47.028Z,1509672167.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:47.399Z,1509672167.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:47.428Z,1509672167.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:47.785Z,1509672167.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:47.800Z,1509672167.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:48.191Z,1509672168.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:48.227Z,1509672168.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:48.584Z,1509672168.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:48.599Z,1509672168.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:49.002Z,1509672169.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:49.025Z,1509672169.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:49.436Z,1509672169.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:49.475Z,1509672169.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:49.806Z,1509672169.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:49.838Z,1509672169.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:50.188Z,1509672170.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:50.203Z,1509672170.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:50.593Z,1509672170.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:50.608Z,1509672170.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:50.985Z,1509672170.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:51.001Z,1509672171.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:51.386Z,1509672171.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:51.407Z,1509672171.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:51.790Z,1509672171.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:51.827Z,1509672171.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:52.199Z,1509672172.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:52.229Z,1509672172.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:52.598Z,1509672172.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:52.629Z,1509672172.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:53.002Z,1509672173.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:53.026Z,1509672173.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:53.384Z,1509672173.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:53.399Z,1509672173.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:53.799Z,1509672173.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:53.829Z,1509672173.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:54.191Z,1509672174.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:54.207Z,1509672174.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:54.585Z,1509672174.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:54.600Z,1509672174.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:55.001Z,1509672175.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:55.034Z,1509672175.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:55.397Z,1509672175.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:55.412Z,1509672175.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:55.806Z,1509672175.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:55.842Z,1509672175.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:56.194Z,1509672176.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:56.271Z,1509672176.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:56.592Z,1509672176.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:56.607Z,1509672176.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:56.995Z,1509672176.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:57.046Z,1509672177.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:57.395Z,1509672177.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:57.415Z,1509672177.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:57.792Z,1509672177.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:57.850Z,1509672177.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:58.206Z,1509672178.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:58.258Z,1509672178.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:58.607Z,1509672178.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:58.625Z,1509672178.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:59.005Z,1509672179.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:59.019Z,1509672179.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:59.383Z,1509672179.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:59.413Z,1509672179.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:22:59.788Z,1509672179.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:22:59.813Z,1509672179.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:00.185Z,1509672180.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:00.273Z,1509672180.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:00.587Z,1509672180.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:00.613Z,1509672180.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:01.005Z,1509672181.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:01.020Z,1509672181.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:01.397Z,1509672181.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:01.412Z,1509672181.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:01.798Z,1509672181.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:01.813Z,1509672181.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:02.189Z,1509672182.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:02.211Z,1509672182.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:02.592Z,1509672182.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:02.607Z,1509672182.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:03.004Z,1509672183.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:03.042Z,1509672183.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:03.412Z,1509672183.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:03.440Z,1509672183.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:03.791Z,1509672183.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:03.811Z,1509672183.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:04.214Z,1509672184.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:04.229Z,1509672184.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:04.594Z,1509672184.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:04.628Z,1509672184.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:05.009Z,1509672185.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:05.023Z,1509672185.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:05.386Z,1509672185.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:05.417Z,1509672185.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:05.787Z,1509672185.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:05.821Z,1509672185.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:06.186Z,1509672186.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:06.217Z,1509672186.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:06.591Z,1509672186.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:06.623Z,1509672186.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:07.001Z,1509672187.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:07.026Z,1509672187.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:07.397Z,1509672187.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:07.429Z,1509672187.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:07.802Z,1509672187.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:07.824Z,1509672187.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:08.207Z,1509672188.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:08.231Z,1509672188.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:08.588Z,1509672188.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:08.603Z,1509672188.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:08.984Z,1509672188.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:09.030Z,1509672189.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:09.384Z,1509672189.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:09.541Z,1509672189.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:09.787Z,1509672189.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:09.817Z,1509672189.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:10.206Z,1509672190.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:10.286Z,1509672190.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:10.597Z,1509672190.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:10.621Z,1509672190.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:11.004Z,1509672191.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:11.051Z,1509672191.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:11.388Z,1509672191.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:11.403Z,1509672191.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:11.790Z,1509672191.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:11.839Z,1509672191.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:12.190Z,1509672192.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:12.205Z,1509672192.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:12.589Z,1509672192.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:12.635Z,1509672192.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:12.994Z,1509672192.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:13.009Z,1509672193.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:13.401Z,1509672193.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:13.432Z,1509672193.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:13.806Z,1509672193.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:13.835Z,1509672193.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:14.188Z,1509672194.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:14.203Z,1509672194.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:14.589Z,1509672194.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:14.604Z,1509672194.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:14.988Z,1509672194.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:15.003Z,1509672195.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:15.392Z,1509672195.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:15.407Z,1509672195.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:15.789Z,1509672195.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:15.805Z,1509672195.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:16.201Z,1509672196.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:16.237Z,1509672196.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:16.601Z,1509672196.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:16.633Z,1509672196.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:17.001Z,1509672197.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:17.033Z,1509672197.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:17.413Z,1509672197.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:17.444Z,1509672197.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:17.789Z,1509672197.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:17.811Z,1509672197.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:18.189Z,1509672198.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:18.204Z,1509672198.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:18.593Z,1509672198.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:18.608Z,1509672198.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:18.997Z,1509672198.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:19.029Z,1509672199.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:19.401Z,1509672199.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:19.432Z,1509672199.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:19.813Z,1509672199.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:19.843Z,1509672199.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:20.192Z,1509672200.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:20.207Z,1509672200.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:20.591Z,1509672200.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:20.620Z,1509672200.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:20.994Z,1509672200.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:21.009Z,1509672201.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:21.393Z,1509672201.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:21.408Z,1509672201.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:21.799Z,1509672201.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:21.838Z,1509672201.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:22.198Z,1509672202.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:22.213Z,1509672202.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:22.606Z,1509672202.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:22.635Z,1509672202.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:22.998Z,1509672202.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:23.013Z,1509672203.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:23.383Z,1509672203.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:23.415Z,1509672203.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:23.801Z,1509672203.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:23.840Z,1509672203.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:24.186Z,1509672204.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:24.213Z,1509672204.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:24.581Z,1509672204.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:24.683Z,1509672204.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:25.006Z,1509672205.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:25.022Z,1509672205.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:25.419Z,1509672205.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:25.478Z,1509672205.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:25.806Z,1509672205.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:25.834Z,1509672205.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:26.184Z,1509672206.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:26.239Z,1509672206.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:26.587Z,1509672206.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:26.635Z,1509672206.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:26.987Z,1509672206.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:27.024Z,1509672207.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:27.379Z,1509672207.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:27.410Z,1509672207.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:27.794Z,1509672207.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:27.809Z,1509672207.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:28.205Z,1509672208.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:28.227Z,1509672208.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:28.604Z,1509672208.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:28.623Z,1509672208.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:29.004Z,1509672209.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:29.019Z,1509672209.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:29.185Z,1509672209.185 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:23:29.185Z,1509672209.185 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T01:23:29.185Z,1509672209.185 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:23:29.386Z,1509672209.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:29.417Z,1509672209.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:23:29.418Z,1509672209.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:29.513Z,1509672209.513 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:23:29.513Z,1509672209.513 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T01:23:29.588Z,1509672209.588 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:23:29.676Z,1509672209.676 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:23:29.796Z,1509672209.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:29.898Z,1509672209.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T01:23:29.899Z,1509672209.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:30.193Z,1509672210.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:30.208Z,1509672210.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:23:30.209Z,1509672210.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:30.593Z,1509672210.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:30.608Z,1509672210.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:23:30.609Z,1509672210.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:31.004Z,1509672211.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:31.019Z,1509672211.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:23:31.020Z,1509672211.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:31.404Z,1509672211.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:31.418Z,1509672211.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:23:31.419Z,1509672211.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:31.805Z,1509672211.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:31.826Z,1509672211.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:23:31.827Z,1509672211.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:32.193Z,1509672212.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:32.208Z,1509672212.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:23:32.209Z,1509672212.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:32.592Z,1509672212.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:32.614Z,1509672212.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:23:32.615Z,1509672212.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:32.996Z,1509672212.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:33.010Z,1509672213.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:23:33.011Z,1509672213.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:33.393Z,1509672213.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:33.408Z,1509672213.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:23:33.409Z,1509672213.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:33.792Z,1509672213.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:33.814Z,1509672213.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:23:33.815Z,1509672213.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:34.205Z,1509672214.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:34.226Z,1509672214.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:23:34.227Z,1509672214.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:34.603Z,1509672214.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:34.622Z,1509672214.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:23:34.623Z,1509672214.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:35.004Z,1509672215.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:35.026Z,1509672215.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:23:35.027Z,1509672215.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:35.396Z,1509672215.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:35.418Z,1509672215.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:23:35.419Z,1509672215.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:35.803Z,1509672215.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:35.857Z,1509672215.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:23:35.858Z,1509672215.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:36.193Z,1509672216.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:36.208Z,1509672216.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:23:36.209Z,1509672216.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:36.596Z,1509672216.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:36.611Z,1509672216.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:23:36.612Z,1509672216.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:37.005Z,1509672217.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:37.019Z,1509672217.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:23:37.020Z,1509672217.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:37.405Z,1509672217.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:37.419Z,1509672217.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:23:37.421Z,1509672217.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:37.805Z,1509672217.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:37.820Z,1509672217.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:23:37.821Z,1509672217.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:38.194Z,1509672218.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:38.214Z,1509672218.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:23:38.215Z,1509672218.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:38.593Z,1509672218.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:38.677Z,1509672218.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T01:23:38.678Z,1509672218.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:38.985Z,1509672218.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:39.013Z,1509672219.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:23:39.014Z,1509672219.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:39.391Z,1509672219.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:39.457Z,1509672219.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:23:39.458Z,1509672219.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:39.784Z,1509672219.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:39.813Z,1509672219.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:23:39.814Z,1509672219.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:40.210Z,1509672220.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:40.262Z,1509672220.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:23:40.263Z,1509672220.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:40.609Z,1509672220.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:40.662Z,1509672220.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:23:40.663Z,1509672220.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:41.005Z,1509672221.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:41.020Z,1509672221.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:23:41.021Z,1509672221.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:41.384Z,1509672221.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:41.419Z,1509672221.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:23:41.420Z,1509672221.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:44.502Z,1509672224.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:44.523Z,1509672224.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T01:23:44.524Z,1509672224.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:44.637Z,1509672224.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:44.685Z,1509672224.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T01:23:44.686Z,1509672224.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:45.058Z,1509672225.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:45.073Z,1509672225.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T01:23:45.074Z,1509672225.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:45.458Z,1509672225.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:45.472Z,1509672225.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T01:23:45.473Z,1509672225.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:45.849Z,1509672225.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:45.864Z,1509672225.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:23:45.865Z,1509672225.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:46.233Z,1509672226.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:46.254Z,1509672226.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:23:46.255Z,1509672226.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:46.632Z,1509672226.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:46.647Z,1509672226.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:23:46.648Z,1509672226.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:47.037Z,1509672227.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:47.051Z,1509672227.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:23:47.052Z,1509672227.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:47.436Z,1509672227.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:47.463Z,1509672227.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:23:47.464Z,1509672227.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:47.839Z,1509672227.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:47.873Z,1509672227.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T01:23:47.874Z,1509672227.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:48.250Z,1509672228.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:48.275Z,1509672228.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T01:23:48.276Z,1509672228.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:48.662Z,1509672228.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:48.682Z,1509672228.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T01:23:48.683Z,1509672228.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:49.050Z,1509672229.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:49.083Z,1509672229.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:49.436Z,1509672229.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:49.451Z,1509672229.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:49.836Z,1509672229.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:49.851Z,1509672229.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:50.236Z,1509672230.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:50.252Z,1509672230.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:50.640Z,1509672230.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:50.675Z,1509672230.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:51.050Z,1509672231.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:51.074Z,1509672231.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:51.450Z,1509672231.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:51.473Z,1509672231.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:51.854Z,1509672231.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:51.883Z,1509672231.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:52.237Z,1509672232.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:52.253Z,1509672232.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:52.643Z,1509672232.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:52.734Z,1509672232.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:53.040Z,1509672233.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:53.079Z,1509672233.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:53.437Z,1509672233.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:53.490Z,1509672233.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:53.850Z,1509672233.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:53.880Z,1509672233.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:54.254Z,1509672234.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:54.311Z,1509672234.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:54.654Z,1509672234.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:54.678Z,1509672234.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:55.041Z,1509672235.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:55.099Z,1509672235.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:55.441Z,1509672235.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:55.456Z,1509672235.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:55.868Z,1509672235.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:55.884Z,1509672235.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:56.257Z,1509672236.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:56.287Z,1509672236.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:56.654Z,1509672236.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:56.678Z,1509672236.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:57.044Z,1509672237.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:57.059Z,1509672237.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:57.436Z,1509672237.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:57.452Z,1509672237.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:57.854Z,1509672237.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:57.878Z,1509672237.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:58.250Z,1509672238.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:58.281Z,1509672238.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:58.650Z,1509672238.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:58.680Z,1509672238.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:59.041Z,1509672239.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:59.079Z,1509672239.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:59.436Z,1509672239.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:59.451Z,1509672239.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:23:59.854Z,1509672239.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:23:59.885Z,1509672239.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:00.254Z,1509672240.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:00.285Z,1509672240.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:00.649Z,1509672240.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:00.687Z,1509672240.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:01.044Z,1509672241.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:01.083Z,1509672241.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:01.440Z,1509672241.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:01.463Z,1509672241.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:01.853Z,1509672241.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:01.868Z,1509672241.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:02.258Z,1509672242.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:02.286Z,1509672242.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:02.650Z,1509672242.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:02.665Z,1509672242.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:03.042Z,1509672243.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:03.057Z,1509672243.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:03.444Z,1509672243.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:03.459Z,1509672243.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:03.843Z,1509672243.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:03.862Z,1509672243.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:04.257Z,1509672244.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:04.288Z,1509672244.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:04.658Z,1509672244.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:04.687Z,1509672244.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:04.687Z,1509672244.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2017-11-03T01:24:04.687Z,1509672244.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:24:04.689Z,1509672244.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:04.689Z,1509672244.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2017-11-03T01:24:04.689Z,1509672244.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:24:04.691Z,1509672244.691 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:04.691Z,1509672244.691 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2017-11-03T01:24:04.691Z,1509672244.691 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:24:04.781Z,1509672244.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:24:04.781Z,1509672244.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:24:04.781Z,1509672244.781 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:24:05.049Z,1509672245.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:05.145Z,1509672245.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:24:05.145Z,1509672245.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2017-11-03T01:24:05.145Z,1509672245.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:24:05.145Z,1509672245.145 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2017-11-03T01:24:05.146Z,1509672245.146 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:24:05.146Z,1509672245.146 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2017-11-03T01:24:05.448Z,1509672245.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:05.462Z,1509672245.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:24:05.462Z,1509672245.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:24:05.462Z,1509672245.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:24:05.463Z,1509672245.463 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:24:05.463Z,1509672245.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:24:05.463Z,1509672245.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:24:05.464Z,1509672245.464 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:24:05.464Z,1509672245.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:24:05.465Z,1509672245.465 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:24:05.847Z,1509672245.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:05.870Z,1509672245.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:24:05.871Z,1509672245.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:06.246Z,1509672246.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:06.261Z,1509672246.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:24:06.262Z,1509672246.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:06.648Z,1509672246.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:06.663Z,1509672246.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:24:06.664Z,1509672246.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:07.052Z,1509672247.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:07.134Z,1509672247.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:24:07.135Z,1509672247.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:07.457Z,1509672247.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:07.473Z,1509672247.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:24:07.474Z,1509672247.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:07.861Z,1509672247.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:07.882Z,1509672247.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:24:07.883Z,1509672247.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:08.239Z,1509672248.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:08.304Z,1509672248.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:24:08.305Z,1509672248.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:08.636Z,1509672248.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:08.662Z,1509672248.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:24:08.662Z,1509672248.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:09.050Z,1509672249.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:09.090Z,1509672249.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:24:09.091Z,1509672249.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:09.440Z,1509672249.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:09.504Z,1509672249.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:24:09.505Z,1509672249.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:09.858Z,1509672249.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:09.873Z,1509672249.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:24:09.874Z,1509672249.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:10.262Z,1509672250.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:10.282Z,1509672250.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:24:10.283Z,1509672250.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:10.658Z,1509672250.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:10.678Z,1509672250.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:24:10.679Z,1509672250.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:11.036Z,1509672251.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:11.063Z,1509672251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:24:11.063Z,1509672251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:11.439Z,1509672251.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:11.465Z,1509672251.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:24:11.466Z,1509672251.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:11.832Z,1509672251.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:11.866Z,1509672251.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:24:11.867Z,1509672251.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:12.257Z,1509672252.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:12.273Z,1509672252.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:24:12.274Z,1509672252.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:12.654Z,1509672252.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:12.668Z,1509672252.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:24:12.669Z,1509672252.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:13.050Z,1509672253.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:13.064Z,1509672253.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:24:13.065Z,1509672253.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:13.436Z,1509672253.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:13.462Z,1509672253.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:24:13.463Z,1509672253.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:13.839Z,1509672253.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:13.864Z,1509672253.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:24:13.865Z,1509672253.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:14.233Z,1509672254.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:14.259Z,1509672254.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T01:24:14.260Z,1509672254.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:14.636Z,1509672254.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:14.662Z,1509672254.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:24:14.662Z,1509672254.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:15.062Z,1509672255.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:15.076Z,1509672255.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:24:15.077Z,1509672255.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:15.461Z,1509672255.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:15.475Z,1509672255.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:24:15.477Z,1509672255.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:15.857Z,1509672255.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:15.872Z,1509672255.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:24:15.873Z,1509672255.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:16.232Z,1509672256.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:16.265Z,1509672256.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:24:16.266Z,1509672256.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:16.639Z,1509672256.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:16.664Z,1509672256.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:24:16.665Z,1509672256.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:17.037Z,1509672257.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:17.064Z,1509672257.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:24:17.065Z,1509672257.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:17.439Z,1509672257.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:17.465Z,1509672257.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:24:17.466Z,1509672257.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:17.857Z,1509672257.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:17.872Z,1509672257.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:24:17.873Z,1509672257.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:18.257Z,1509672258.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:18.272Z,1509672258.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:24:18.273Z,1509672258.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:18.662Z,1509672258.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:18.676Z,1509672258.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:24:18.677Z,1509672258.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:19.035Z,1509672259.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:19.061Z,1509672259.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:24:19.062Z,1509672259.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:19.440Z,1509672259.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:19.465Z,1509672259.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:24:19.466Z,1509672259.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:19.839Z,1509672259.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:19.864Z,1509672259.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:24:19.865Z,1509672259.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:20.257Z,1509672260.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:20.278Z,1509672260.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:24:20.279Z,1509672260.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:20.658Z,1509672260.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:20.672Z,1509672260.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:24:20.673Z,1509672260.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:21.062Z,1509672261.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:21.076Z,1509672261.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:24:21.077Z,1509672261.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:21.435Z,1509672261.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:21.518Z,1509672261.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:24:21.519Z,1509672261.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:21.836Z,1509672261.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:21.867Z,1509672261.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:24:21.868Z,1509672261.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:22.240Z,1509672262.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:22.275Z,1509672262.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:24:22.276Z,1509672262.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:22.637Z,1509672262.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:22.694Z,1509672262.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:24:22.695Z,1509672262.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:23.050Z,1509672263.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:23.082Z,1509672263.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:24:23.083Z,1509672263.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:23.445Z,1509672263.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:23.494Z,1509672263.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:24:23.495Z,1509672263.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:23.850Z,1509672263.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:23.912Z,1509672263.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T01:24:23.913Z,1509672263.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:24.236Z,1509672264.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:24.251Z,1509672264.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:24:24.252Z,1509672264.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:24.636Z,1509672264.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:24.651Z,1509672264.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T01:24:24.652Z,1509672264.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:25.036Z,1509672265.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:25.051Z,1509672265.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:25.436Z,1509672265.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:25.452Z,1509672265.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:25.835Z,1509672265.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:25.850Z,1509672265.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:26.250Z,1509672266.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:26.280Z,1509672266.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:26.649Z,1509672266.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:26.685Z,1509672266.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:27.057Z,1509672267.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:27.086Z,1509672267.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:27.440Z,1509672267.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:27.463Z,1509672267.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:27.840Z,1509672267.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:27.855Z,1509672267.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:28.236Z,1509672268.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:28.251Z,1509672268.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:28.640Z,1509672268.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:28.663Z,1509672268.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:29.054Z,1509672269.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:29.084Z,1509672269.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:29.448Z,1509672269.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:29.463Z,1509672269.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:29.854Z,1509672269.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:29.884Z,1509672269.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:30.240Z,1509672270.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:30.255Z,1509672270.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:30.635Z,1509672270.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:30.650Z,1509672270.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:31.041Z,1509672271.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:31.055Z,1509672271.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:31.440Z,1509672271.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:31.463Z,1509672271.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:31.853Z,1509672271.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:31.888Z,1509672271.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:32.254Z,1509672272.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:32.285Z,1509672272.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:32.650Z,1509672272.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:32.665Z,1509672272.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:33.046Z,1509672273.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:33.060Z,1509672273.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:33.444Z,1509672273.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:33.459Z,1509672273.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:33.850Z,1509672273.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:33.886Z,1509672273.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:34.245Z,1509672274.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:34.260Z,1509672274.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:34.650Z,1509672274.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:34.665Z,1509672274.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:35.042Z,1509672275.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:35.061Z,1509672275.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:35.446Z,1509672275.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:35.460Z,1509672275.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:35.845Z,1509672275.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:35.906Z,1509672275.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:36.257Z,1509672276.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:36.311Z,1509672276.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:36.657Z,1509672276.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:36.672Z,1509672276.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:37.058Z,1509672277.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:37.089Z,1509672277.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:37.443Z,1509672277.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:37.495Z,1509672277.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:37.845Z,1509672277.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:37.866Z,1509672277.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:38.242Z,1509672278.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:38.298Z,1509672278.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:38.642Z,1509672278.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:38.691Z,1509672278.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:39.058Z,1509672279.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:39.093Z,1509672279.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:39.458Z,1509672279.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:39.489Z,1509672279.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:39.850Z,1509672279.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:39.865Z,1509672279.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:40.244Z,1509672280.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:40.259Z,1509672280.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:40.644Z,1509672280.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:40.659Z,1509672280.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:41.046Z,1509672281.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:41.061Z,1509672281.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:41.443Z,1509672281.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:41.458Z,1509672281.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:44.542Z,1509672284.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:44.557Z,1509672284.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:44.702Z,1509672284.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:44.737Z,1509672284.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:45.096Z,1509672285.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:45.111Z,1509672285.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:45.488Z,1509672285.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:45.504Z,1509672285.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:45.891Z,1509672285.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:45.911Z,1509672285.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:46.293Z,1509672286.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:46.307Z,1509672286.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:46.691Z,1509672286.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:46.711Z,1509672286.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:47.096Z,1509672287.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:47.112Z,1509672287.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:47.498Z,1509672287.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:47.513Z,1509672287.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:47.897Z,1509672287.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:47.912Z,1509672287.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:48.288Z,1509672288.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:48.304Z,1509672288.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:48.689Z,1509672288.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:48.704Z,1509672288.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:49.092Z,1509672289.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:49.107Z,1509672289.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:49.492Z,1509672289.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:49.537Z,1509672289.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:49.897Z,1509672289.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:49.919Z,1509672289.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:50.297Z,1509672290.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:50.312Z,1509672290.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:50.696Z,1509672290.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:50.754Z,1509672290.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:51.093Z,1509672291.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:51.107Z,1509672291.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:51.485Z,1509672291.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:51.504Z,1509672291.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:51.901Z,1509672291.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:51.916Z,1509672291.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:52.301Z,1509672292.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:52.316Z,1509672292.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:52.698Z,1509672292.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:52.713Z,1509672292.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:53.090Z,1509672293.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:53.105Z,1509672293.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:53.486Z,1509672293.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:53.501Z,1509672293.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:53.898Z,1509672293.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:53.906Z,1509672293.906 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:24:53.906Z,1509672293.906 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:24:53.906Z,1509672293.906 [BPC1](ERROR): Communications Fault
2017-11-03T01:24:53.915Z,1509672293.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:54.013Z,1509672294.013 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:24:54.300Z,1509672294.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:54.316Z,1509672294.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:54.701Z,1509672294.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:54.716Z,1509672294.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:55.091Z,1509672295.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:55.107Z,1509672295.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:55.189Z,1509672295.189 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:24:55.189Z,1509672295.189 [BPC1] No Fault, FailCount= 1
2017-11-03T01:24:55.492Z,1509672295.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:55.586Z,1509672295.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:55.900Z,1509672295.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:55.919Z,1509672295.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:56.300Z,1509672296.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:56.315Z,1509672296.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:56.700Z,1509672296.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:56.715Z,1509672296.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:57.089Z,1509672297.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:57.104Z,1509672297.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:57.490Z,1509672297.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:57.511Z,1509672297.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:57.900Z,1509672297.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:57.923Z,1509672297.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:58.300Z,1509672298.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:58.322Z,1509672298.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:58.700Z,1509672298.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:58.715Z,1509672298.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:59.089Z,1509672299.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:59.104Z,1509672299.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:59.489Z,1509672299.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:59.503Z,1509672299.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:24:59.900Z,1509672299.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:24:59.923Z,1509672299.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:00.300Z,1509672300.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:00.347Z,1509672300.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:00.700Z,1509672300.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:00.715Z,1509672300.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:01.086Z,1509672301.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:01.101Z,1509672301.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:01.488Z,1509672301.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:01.503Z,1509672301.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:01.900Z,1509672301.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:01.915Z,1509672301.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:02.299Z,1509672302.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:02.319Z,1509672302.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:02.700Z,1509672302.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:02.715Z,1509672302.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:03.086Z,1509672303.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:03.101Z,1509672303.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:03.485Z,1509672303.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:03.506Z,1509672303.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:03.900Z,1509672303.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:03.923Z,1509672303.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:04.300Z,1509672304.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:04.315Z,1509672304.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:04.698Z,1509672304.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:04.719Z,1509672304.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:05.091Z,1509672305.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:05.111Z,1509672305.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:05.491Z,1509672305.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:05.506Z,1509672305.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:05.900Z,1509672305.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:05.919Z,1509672305.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:06.300Z,1509672306.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:06.319Z,1509672306.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:06.701Z,1509672306.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:06.722Z,1509672306.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:07.091Z,1509672307.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:07.111Z,1509672307.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:07.488Z,1509672307.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:07.503Z,1509672307.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:07.901Z,1509672307.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:07.916Z,1509672307.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:08.300Z,1509672308.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:08.323Z,1509672308.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:08.700Z,1509672308.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:08.723Z,1509672308.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:09.090Z,1509672309.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:09.105Z,1509672309.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:09.485Z,1509672309.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:09.501Z,1509672309.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:09.900Z,1509672309.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:09.919Z,1509672309.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:10.300Z,1509672310.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:10.308Z,1509672310.308 [BPC1](ERROR): Failed to parse message.
2017-11-03T01:25:10.309Z,1509672310.309 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:25:10.309Z,1509672310.309 [BPC1] Data Fault, FailCount= 2
2017-11-03T01:25:10.309Z,1509672310.309 [BPC1](ERROR): Data Fault
2017-11-03T01:25:10.323Z,1509672310.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:10.437Z,1509672310.437 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:25:10.700Z,1509672310.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:10.716Z,1509672310.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:11.089Z,1509672311.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:11.104Z,1509672311.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:11.489Z,1509672311.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:11.503Z,1509672311.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:11.588Z,1509672311.588 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:25:11.588Z,1509672311.588 [BPC1] No Fault, FailCount= 2
2017-11-03T01:25:11.897Z,1509672311.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:11.975Z,1509672311.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:12.300Z,1509672312.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:12.319Z,1509672312.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:12.698Z,1509672312.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:12.712Z,1509672312.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:13.090Z,1509672313.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:13.111Z,1509672313.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:13.488Z,1509672313.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:13.546Z,1509672313.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:13.900Z,1509672313.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:13.922Z,1509672313.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:14.298Z,1509672314.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:14.313Z,1509672314.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:14.700Z,1509672314.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:14.715Z,1509672314.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:15.085Z,1509672315.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:15.107Z,1509672315.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:15.492Z,1509672315.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:15.507Z,1509672315.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:15.900Z,1509672315.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:15.915Z,1509672315.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:16.301Z,1509672316.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:16.315Z,1509672316.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:16.698Z,1509672316.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:16.713Z,1509672316.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:17.090Z,1509672317.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:17.105Z,1509672317.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:17.486Z,1509672317.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:17.501Z,1509672317.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:17.900Z,1509672317.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:17.924Z,1509672317.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:18.305Z,1509672318.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:18.320Z,1509672318.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:18.705Z,1509672318.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:18.720Z,1509672318.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:19.095Z,1509672319.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:19.110Z,1509672319.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:19.483Z,1509672319.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:19.509Z,1509672319.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:19.906Z,1509672319.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:19.926Z,1509672319.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:20.306Z,1509672320.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:20.321Z,1509672320.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:20.701Z,1509672320.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:20.723Z,1509672320.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:21.083Z,1509672321.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:21.110Z,1509672321.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:21.480Z,1509672321.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:21.506Z,1509672321.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:21.902Z,1509672321.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:21.917Z,1509672321.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:22.305Z,1509672322.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:22.320Z,1509672322.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:22.702Z,1509672322.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:22.717Z,1509672322.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:23.094Z,1509672323.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:23.109Z,1509672323.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:23.479Z,1509672323.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:23.505Z,1509672323.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:23.902Z,1509672323.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:23.917Z,1509672323.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:24.305Z,1509672324.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:24.367Z,1509672324.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:24.702Z,1509672324.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:24.717Z,1509672324.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:25.077Z,1509672325.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:25.104Z,1509672325.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:25.483Z,1509672325.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:25.549Z,1509672325.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:25.902Z,1509672325.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:25.916Z,1509672325.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:26.297Z,1509672326.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:26.352Z,1509672326.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:26.701Z,1509672326.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:26.758Z,1509672326.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:27.083Z,1509672327.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:27.109Z,1509672327.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:27.483Z,1509672327.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:27.509Z,1509672327.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:27.901Z,1509672327.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:27.917Z,1509672327.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:28.301Z,1509672328.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:28.322Z,1509672328.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:28.698Z,1509672328.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:28.713Z,1509672328.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:29.082Z,1509672329.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:29.108Z,1509672329.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:29.477Z,1509672329.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:29.511Z,1509672329.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:29.902Z,1509672329.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:29.917Z,1509672329.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:30.299Z,1509672330.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:30.319Z,1509672330.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:30.702Z,1509672330.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:30.722Z,1509672330.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:31.084Z,1509672331.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:31.110Z,1509672331.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:31.479Z,1509672331.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:31.510Z,1509672331.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:31.906Z,1509672331.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:31.921Z,1509672331.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:32.298Z,1509672332.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:32.319Z,1509672332.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:32.701Z,1509672332.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:32.717Z,1509672332.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:33.080Z,1509672333.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:33.110Z,1509672333.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:33.476Z,1509672333.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:33.507Z,1509672333.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:33.902Z,1509672333.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:33.917Z,1509672333.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:34.305Z,1509672334.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:34.327Z,1509672334.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:34.698Z,1509672334.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:34.718Z,1509672334.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:35.081Z,1509672335.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:35.097Z,1509672335.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:35.479Z,1509672335.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:35.514Z,1509672335.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:35.901Z,1509672335.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:35.917Z,1509672335.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:36.299Z,1509672336.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:36.318Z,1509672336.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:36.702Z,1509672336.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:36.717Z,1509672336.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:37.083Z,1509672337.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:37.135Z,1509672337.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:37.480Z,1509672337.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:37.514Z,1509672337.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:37.902Z,1509672337.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:37.917Z,1509672337.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:38.301Z,1509672338.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:38.317Z,1509672338.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:38.702Z,1509672338.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:38.743Z,1509672338.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:39.082Z,1509672339.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:39.118Z,1509672339.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:39.487Z,1509672339.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:39.515Z,1509672339.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:39.893Z,1509672339.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:39.960Z,1509672339.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:40.304Z,1509672340.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:40.319Z,1509672340.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:40.693Z,1509672340.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:40.760Z,1509672340.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:41.087Z,1509672341.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:41.135Z,1509672341.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:41.484Z,1509672341.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:41.515Z,1509672341.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:44.604Z,1509672344.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:44.619Z,1509672344.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:44.773Z,1509672344.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:44.814Z,1509672344.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:45.172Z,1509672345.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:45.195Z,1509672345.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:45.559Z,1509672345.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:45.574Z,1509672345.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:45.957Z,1509672345.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:45.978Z,1509672345.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:46.361Z,1509672346.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:46.375Z,1509672346.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:46.744Z,1509672346.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:46.770Z,1509672346.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:47.169Z,1509672347.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:47.184Z,1509672347.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:47.572Z,1509672347.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:47.587Z,1509672347.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:47.965Z,1509672347.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:47.980Z,1509672347.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:48.357Z,1509672348.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:48.378Z,1509672348.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:48.760Z,1509672348.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:48.775Z,1509672348.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:49.160Z,1509672349.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:49.175Z,1509672349.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:49.557Z,1509672349.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:49.578Z,1509672349.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:49.972Z,1509672349.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:49.987Z,1509672349.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:50.372Z,1509672350.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:50.387Z,1509672350.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:50.769Z,1509672350.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:50.783Z,1509672350.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:51.160Z,1509672351.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:51.175Z,1509672351.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:51.559Z,1509672351.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:51.599Z,1509672351.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:51.949Z,1509672351.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:51.979Z,1509672351.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:52.362Z,1509672352.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:52.377Z,1509672352.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:52.751Z,1509672352.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:52.777Z,1509672352.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:53.169Z,1509672353.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:53.231Z,1509672353.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:53.570Z,1509672353.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:53.585Z,1509672353.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:53.969Z,1509672353.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:54.023Z,1509672354.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:54.348Z,1509672354.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:54.379Z,1509672354.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:54.749Z,1509672354.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:54.803Z,1509672354.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:55.150Z,1509672355.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:55.202Z,1509672355.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:55.550Z,1509672355.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:55.592Z,1509672355.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:55.987Z,1509672355.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:56.011Z,1509672356.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:56.381Z,1509672356.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:56.406Z,1509672356.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:56.776Z,1509672356.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:56.819Z,1509672356.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:57.159Z,1509672357.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:57.203Z,1509672357.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:57.553Z,1509672357.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:57.596Z,1509672357.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:57.955Z,1509672357.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:58.003Z,1509672358.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:58.357Z,1509672358.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:58.372Z,1509672358.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:58.755Z,1509672358.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:58.769Z,1509672358.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:59.172Z,1509672359.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:59.191Z,1509672359.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:59.572Z,1509672359.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:59.622Z,1509672359.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:25:59.967Z,1509672359.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:25:59.991Z,1509672359.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:00.373Z,1509672360.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:00.401Z,1509672360.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:00.749Z,1509672360.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:00.789Z,1509672360.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:01.150Z,1509672361.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:01.185Z,1509672361.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:01.550Z,1509672361.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:01.585Z,1509672361.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:01.971Z,1509672361.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:02.038Z,1509672362.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:02.373Z,1509672362.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:02.396Z,1509672362.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:02.781Z,1509672362.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:02.830Z,1509672362.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:03.149Z,1509672363.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:03.211Z,1509672363.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:03.569Z,1509672363.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:03.605Z,1509672363.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:03.957Z,1509672363.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:04.003Z,1509672364.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:04.359Z,1509672364.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:04.426Z,1509672364.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:04.758Z,1509672364.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:04.785Z,1509672364.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:05.168Z,1509672365.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:05.199Z,1509672365.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:05.572Z,1509672365.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:05.633Z,1509672365.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:05.977Z,1509672365.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:06.073Z,1509672366.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:06.375Z,1509672366.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:06.391Z,1509672366.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:06.751Z,1509672366.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:06.788Z,1509672366.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:07.152Z,1509672367.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:07.184Z,1509672367.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:07.549Z,1509672367.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:07.617Z,1509672367.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:07.962Z,1509672367.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:07.992Z,1509672367.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:08.362Z,1509672368.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:08.411Z,1509672368.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:08.766Z,1509672368.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:08.790Z,1509672368.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:09.148Z,1509672369.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:09.193Z,1509672369.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:09.548Z,1509672369.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:09.602Z,1509672369.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:09.952Z,1509672369.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:09.991Z,1509672369.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:10.348Z,1509672370.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:10.363Z,1509672370.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:10.755Z,1509672370.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:10.794Z,1509672370.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:11.166Z,1509672371.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:11.190Z,1509672371.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:11.560Z,1509672371.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:11.595Z,1509672371.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:11.962Z,1509672371.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:11.992Z,1509672371.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:12.352Z,1509672372.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:12.391Z,1509672372.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:12.752Z,1509672372.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:12.766Z,1509672372.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:13.150Z,1509672373.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:13.165Z,1509672373.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:13.553Z,1509672373.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:13.567Z,1509672373.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:13.960Z,1509672373.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:13.975Z,1509672373.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:14.362Z,1509672374.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:14.397Z,1509672374.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:14.769Z,1509672374.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:14.799Z,1509672374.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:15.153Z,1509672375.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:15.167Z,1509672375.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:15.553Z,1509672375.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:15.568Z,1509672375.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:15.952Z,1509672375.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:15.968Z,1509672375.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:16.352Z,1509672376.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:16.368Z,1509672376.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:16.752Z,1509672376.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:16.798Z,1509672376.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:17.162Z,1509672377.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:17.183Z,1509672377.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:17.570Z,1509672377.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:17.664Z,1509672377.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:17.968Z,1509672377.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:17.984Z,1509672377.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:18.348Z,1509672378.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:18.374Z,1509672378.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:18.751Z,1509672378.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:18.777Z,1509672378.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:19.152Z,1509672379.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:19.177Z,1509672379.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:19.548Z,1509672379.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:19.574Z,1509672379.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:19.974Z,1509672379.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:19.988Z,1509672379.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:20.373Z,1509672380.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:20.388Z,1509672380.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:20.769Z,1509672380.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:20.830Z,1509672380.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:21.141Z,1509672381.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:21.175Z,1509672381.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:21.548Z,1509672381.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:21.599Z,1509672381.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:21.948Z,1509672381.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:22.005Z,1509672382.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:22.345Z,1509672382.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:22.378Z,1509672382.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:22.748Z,1509672382.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:22.867Z,1509672382.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:23.169Z,1509672383.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:23.184Z,1509672383.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:23.573Z,1509672383.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:23.624Z,1509672383.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:23.970Z,1509672383.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:24.038Z,1509672384.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:24.347Z,1509672384.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:24.367Z,1509672384.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:24.748Z,1509672384.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:24.770Z,1509672384.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:25.153Z,1509672385.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:25.191Z,1509672385.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:25.555Z,1509672385.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:25.571Z,1509672385.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:25.960Z,1509672385.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:25.994Z,1509672385.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:26.362Z,1509672386.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:26.391Z,1509672386.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:26.766Z,1509672386.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:26.789Z,1509672386.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:27.198Z,1509672387.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:27.212Z,1509672387.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:27.552Z,1509672387.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:27.591Z,1509672387.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:27.952Z,1509672387.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:27.967Z,1509672387.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:28.348Z,1509672388.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:28.363Z,1509672388.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:28.755Z,1509672388.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:28.791Z,1509672388.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:29.166Z,1509672389.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:29.189Z,1509672389.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:29.560Z,1509672389.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:29.594Z,1509672389.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:29.966Z,1509672389.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:29.989Z,1509672389.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:30.351Z,1509672390.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:30.371Z,1509672390.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:30.747Z,1509672390.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:30.762Z,1509672390.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:31.153Z,1509672391.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:31.168Z,1509672391.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:31.555Z,1509672391.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:31.570Z,1509672391.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:31.969Z,1509672391.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:31.998Z,1509672391.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:32.370Z,1509672392.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:32.399Z,1509672392.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:32.766Z,1509672392.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:32.789Z,1509672392.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:33.147Z,1509672393.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:33.162Z,1509672393.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:33.555Z,1509672393.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:33.594Z,1509672393.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:33.951Z,1509672393.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:33.971Z,1509672393.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:34.353Z,1509672394.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:34.411Z,1509672394.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:34.752Z,1509672394.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:34.775Z,1509672394.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:35.166Z,1509672395.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:35.197Z,1509672395.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:35.565Z,1509672395.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:35.580Z,1509672395.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:35.966Z,1509672395.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:36.015Z,1509672396.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:36.352Z,1509672396.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:36.374Z,1509672396.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:36.753Z,1509672396.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:36.767Z,1509672396.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:37.153Z,1509672397.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:37.207Z,1509672397.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:37.552Z,1509672397.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:37.575Z,1509672397.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:37.957Z,1509672397.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:38.002Z,1509672398.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:38.366Z,1509672398.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:38.397Z,1509672398.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:38.766Z,1509672398.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:38.815Z,1509672398.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:39.152Z,1509672399.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:39.167Z,1509672399.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:39.553Z,1509672399.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:39.567Z,1509672399.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:39.953Z,1509672399.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:39.967Z,1509672399.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:40.354Z,1509672400.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:40.369Z,1509672400.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:40.753Z,1509672400.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:40.768Z,1509672400.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:41.166Z,1509672401.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:41.197Z,1509672401.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:41.565Z,1509672401.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:41.580Z,1509672401.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:44.663Z,1509672404.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:44.679Z,1509672404.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:44.820Z,1509672404.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:44.850Z,1509672404.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:45.218Z,1509672405.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:45.253Z,1509672405.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:45.616Z,1509672405.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:45.650Z,1509672405.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:46.034Z,1509672406.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:46.050Z,1509672406.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:46.436Z,1509672406.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:46.455Z,1509672406.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:46.826Z,1509672406.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:46.859Z,1509672406.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:47.216Z,1509672407.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:47.244Z,1509672407.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:47.613Z,1509672407.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:47.658Z,1509672407.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:48.020Z,1509672408.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:48.052Z,1509672408.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:48.416Z,1509672408.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:48.442Z,1509672408.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:48.812Z,1509672408.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:48.832Z,1509672408.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:49.225Z,1509672409.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:49.260Z,1509672409.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:49.625Z,1509672409.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:49.682Z,1509672409.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:50.025Z,1509672410.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:50.063Z,1509672410.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:50.412Z,1509672410.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:50.432Z,1509672410.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:50.812Z,1509672410.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:50.870Z,1509672410.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:51.216Z,1509672411.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:51.231Z,1509672411.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:51.616Z,1509672411.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:51.661Z,1509672411.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:52.031Z,1509672412.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:52.079Z,1509672412.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:52.429Z,1509672412.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:52.462Z,1509672412.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:52.818Z,1509672412.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:52.863Z,1509672412.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:53.216Z,1509672413.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:53.261Z,1509672413.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:53.616Z,1509672413.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:53.671Z,1509672413.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:54.017Z,1509672414.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:54.032Z,1509672414.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:54.416Z,1509672414.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:54.432Z,1509672414.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:54.816Z,1509672414.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:54.832Z,1509672414.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:55.232Z,1509672415.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:55.259Z,1509672415.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:55.634Z,1509672415.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:55.666Z,1509672415.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:56.029Z,1509672416.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:56.062Z,1509672416.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:56.414Z,1509672416.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:56.435Z,1509672416.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:56.816Z,1509672416.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:56.835Z,1509672416.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:57.230Z,1509672417.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:57.263Z,1509672417.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:57.616Z,1509672417.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:57.639Z,1509672417.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:58.030Z,1509672418.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:58.063Z,1509672418.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:58.431Z,1509672418.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:58.465Z,1509672418.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:58.822Z,1509672418.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:58.861Z,1509672418.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:59.217Z,1509672419.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:59.231Z,1509672419.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:26:59.616Z,1509672419.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:26:59.632Z,1509672419.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:00.017Z,1509672420.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:00.035Z,1509672420.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:00.417Z,1509672420.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:00.432Z,1509672420.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:00.815Z,1509672420.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:00.831Z,1509672420.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:01.231Z,1509672421.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:01.263Z,1509672421.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:01.633Z,1509672421.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:01.667Z,1509672421.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:02.030Z,1509672422.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:02.070Z,1509672422.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:02.416Z,1509672422.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:02.435Z,1509672422.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:02.816Z,1509672422.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:02.840Z,1509672422.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:03.216Z,1509672423.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:03.235Z,1509672423.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:03.616Z,1509672423.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:03.639Z,1509672423.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:04.025Z,1509672424.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:04.075Z,1509672424.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:04.435Z,1509672424.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:04.467Z,1509672424.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:04.839Z,1509672424.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:04.867Z,1509672424.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:05.218Z,1509672425.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:05.259Z,1509672425.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:05.620Z,1509672425.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:05.679Z,1509672425.679 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:05.680Z,1509672425.680 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2017-11-03T01:27:05.680Z,1509672425.680 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:27:05.681Z,1509672425.681 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:05.682Z,1509672425.682 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2017-11-03T01:27:05.682Z,1509672425.682 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:27:05.683Z,1509672425.683 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:05.684Z,1509672425.684 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2017-11-03T01:27:05.684Z,1509672425.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:27:05.780Z,1509672425.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:27:05.780Z,1509672425.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:27:05.781Z,1509672425.781 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:27:06.022Z,1509672426.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:06.136Z,1509672426.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:27:06.137Z,1509672426.137 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2017-11-03T01:27:06.137Z,1509672426.137 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:27:06.137Z,1509672426.137 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2017-11-03T01:27:06.138Z,1509672426.138 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:27:06.138Z,1509672426.138 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2017-11-03T01:27:06.418Z,1509672426.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:06.443Z,1509672426.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:27:06.444Z,1509672426.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:27:06.448Z,1509672426.448 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:27:06.449Z,1509672426.449 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:27:06.449Z,1509672426.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:27:06.450Z,1509672426.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:27:06.450Z,1509672426.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:27:06.450Z,1509672426.450 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:27:06.451Z,1509672426.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:27:06.823Z,1509672426.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:06.872Z,1509672426.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:27:06.873Z,1509672426.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:07.228Z,1509672427.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:07.252Z,1509672427.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:27:07.253Z,1509672427.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:07.627Z,1509672427.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:07.678Z,1509672427.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:27:07.679Z,1509672427.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:08.030Z,1509672428.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:08.072Z,1509672428.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:27:08.073Z,1509672428.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:08.422Z,1509672428.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:08.470Z,1509672428.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:27:08.471Z,1509672428.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:08.820Z,1509672428.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:08.845Z,1509672428.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:27:08.846Z,1509672428.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:09.221Z,1509672429.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:09.240Z,1509672429.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:27:09.241Z,1509672429.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:09.623Z,1509672429.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:09.639Z,1509672429.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:27:09.641Z,1509672429.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:10.028Z,1509672430.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:10.070Z,1509672430.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:27:10.071Z,1509672430.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:10.428Z,1509672430.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:10.445Z,1509672430.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:27:10.446Z,1509672430.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:10.828Z,1509672430.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:10.846Z,1509672430.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:27:10.847Z,1509672430.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:11.221Z,1509672431.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:11.238Z,1509672431.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:27:11.239Z,1509672431.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:11.623Z,1509672431.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:11.647Z,1509672431.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:27:11.648Z,1509672431.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:12.022Z,1509672432.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:12.045Z,1509672432.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:27:12.046Z,1509672432.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:12.421Z,1509672432.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:12.439Z,1509672432.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:27:12.441Z,1509672432.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:12.825Z,1509672432.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:12.841Z,1509672432.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:27:12.842Z,1509672432.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:13.228Z,1509672433.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:13.268Z,1509672433.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:27:13.269Z,1509672433.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:13.627Z,1509672433.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:13.650Z,1509672433.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:27:13.651Z,1509672433.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:14.028Z,1509672434.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:14.046Z,1509672434.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:27:14.047Z,1509672434.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:14.421Z,1509672434.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:14.445Z,1509672434.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:27:14.446Z,1509672434.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:14.822Z,1509672434.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:14.870Z,1509672434.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:27:14.871Z,1509672434.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:15.220Z,1509672435.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:15.234Z,1509672435.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T01:27:15.235Z,1509672435.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:15.623Z,1509672435.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:15.642Z,1509672435.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:27:15.643Z,1509672435.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:16.030Z,1509672436.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:16.045Z,1509672436.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:27:16.046Z,1509672436.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:16.429Z,1509672436.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:16.471Z,1509672436.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:27:16.472Z,1509672436.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:16.828Z,1509672436.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:16.846Z,1509672436.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:27:16.847Z,1509672436.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:17.220Z,1509672437.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:17.239Z,1509672437.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:27:17.240Z,1509672437.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:17.624Z,1509672437.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:17.640Z,1509672437.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:27:17.641Z,1509672437.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:18.023Z,1509672438.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:18.058Z,1509672438.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:27:18.060Z,1509672438.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:18.419Z,1509672438.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:18.449Z,1509672438.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:27:18.450Z,1509672438.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:18.809Z,1509672438.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:18.859Z,1509672438.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:27:18.859Z,1509672438.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:19.237Z,1509672439.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:19.251Z,1509672439.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:27:19.253Z,1509672439.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:19.633Z,1509672439.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:19.666Z,1509672439.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:27:19.667Z,1509672439.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:20.038Z,1509672440.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:20.056Z,1509672440.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:27:20.057Z,1509672440.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:20.408Z,1509672440.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:20.466Z,1509672440.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:27:20.467Z,1509672440.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:20.812Z,1509672440.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:20.844Z,1509672440.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:27:20.845Z,1509672440.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:21.215Z,1509672441.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:21.241Z,1509672441.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:27:21.242Z,1509672441.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:21.615Z,1509672441.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:21.686Z,1509672441.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:27:21.687Z,1509672441.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:22.035Z,1509672442.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:22.051Z,1509672442.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:27:22.052Z,1509672442.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:22.436Z,1509672442.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:22.475Z,1509672442.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:27:22.476Z,1509672442.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:22.821Z,1509672442.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:22.866Z,1509672442.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:27:22.867Z,1509672442.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:23.213Z,1509672443.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:23.258Z,1509672443.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:27:23.259Z,1509672443.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:23.609Z,1509672443.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:23.623Z,1509672443.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T01:27:23.624Z,1509672443.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:24.016Z,1509672444.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:24.054Z,1509672444.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:27:24.055Z,1509672444.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:24.414Z,1509672444.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:24.456Z,1509672444.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:27:24.461Z,1509672444.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:24.812Z,1509672444.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:24.827Z,1509672444.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T01:27:24.828Z,1509672444.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:25.231Z,1509672445.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:25.259Z,1509672445.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:27:25.259Z,1509672445.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:25.632Z,1509672445.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:25.655Z,1509672445.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T01:27:25.657Z,1509672445.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:26.026Z,1509672446.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:26.061Z,1509672446.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:26.412Z,1509672446.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:26.428Z,1509672446.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:26.812Z,1509672446.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:26.854Z,1509672446.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:27.220Z,1509672447.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:27.239Z,1509672447.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:27.619Z,1509672447.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:27.666Z,1509672447.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:28.029Z,1509672448.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:28.064Z,1509672448.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:28.430Z,1509672448.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:28.460Z,1509672448.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:28.831Z,1509672448.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:28.887Z,1509672448.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:29.216Z,1509672449.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:29.261Z,1509672449.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:29.616Z,1509672449.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:29.630Z,1509672449.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:30.015Z,1509672450.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:30.032Z,1509672450.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:30.422Z,1509672450.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:30.440Z,1509672450.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:30.816Z,1509672450.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:30.839Z,1509672450.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:31.222Z,1509672451.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:31.237Z,1509672451.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:31.631Z,1509672451.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:31.658Z,1509672451.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:32.032Z,1509672452.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:32.059Z,1509672452.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:32.416Z,1509672452.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:32.459Z,1509672452.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:32.816Z,1509672452.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:32.835Z,1509672452.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:33.217Z,1509672453.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:33.234Z,1509672453.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:33.614Z,1509672453.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:33.645Z,1509672453.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:34.026Z,1509672454.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:34.041Z,1509672454.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:34.448Z,1509672454.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:34.472Z,1509672454.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:34.824Z,1509672454.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:34.865Z,1509672454.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:35.221Z,1509672455.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:35.231Z,1509672455.231 [PNI_TCM](ERROR): CRC does not match. Expected:0x29945 got:0x6210
2017-11-03T01:27:35.268Z,1509672455.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:35.620Z,1509672455.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:35.647Z,1509672455.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:36.022Z,1509672456.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:36.037Z,1509672456.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:36.421Z,1509672456.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:36.440Z,1509672456.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:36.822Z,1509672456.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:36.839Z,1509672456.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:37.225Z,1509672457.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:37.267Z,1509672457.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:37.629Z,1509672457.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:37.648Z,1509672457.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:38.025Z,1509672458.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:38.044Z,1509672458.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:38.417Z,1509672458.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:38.429Z,1509672458.429 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:27:38.429Z,1509672458.429 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:27:38.429Z,1509672458.429 [BPC1](ERROR): Communications Fault
2017-11-03T01:27:38.437Z,1509672458.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:38.513Z,1509672458.513 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:27:38.824Z,1509672458.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:38.839Z,1509672458.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:39.225Z,1509672459.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:39.240Z,1509672459.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:39.618Z,1509672459.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:39.641Z,1509672459.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:39.721Z,1509672459.721 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:27:39.721Z,1509672459.721 [BPC1] No Fault, FailCount= 1
2017-11-03T01:27:40.030Z,1509672460.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:40.115Z,1509672460.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:40.429Z,1509672460.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:40.474Z,1509672460.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:40.848Z,1509672460.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:40.872Z,1509672460.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:40.875Z,1509672460.875 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T01:27:40.875Z,1509672460.875 [Default:CheckIn:C.Wait] Stopped
2017-11-03T01:27:40.875Z,1509672460.875 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T01:27:40.876Z,1509672460.876 [Default:CheckIn:D] Running Loop=1
2017-11-03T01:27:41.221Z,1509672461.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:41.266Z,1509672461.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:41.269Z,1509672461.269 [Default:CheckIn:D] Stopped
2017-11-03T01:27:41.269Z,1509672461.269 [Default:CheckIn:E] Running Loop=1
2017-11-03T01:27:41.626Z,1509672461.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:41.635Z,1509672461.635 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:27:41.671Z,1509672461.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:41.674Z,1509672461.674 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.561711 min 
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn:E] Stopped
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn] Stopped
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn](INFO): Running loop #8
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn] Running Loop=8
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T01:27:41.675Z,1509672461.675 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T01:27:44.719Z,1509672464.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:44.778Z,1509672464.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:44.899Z,1509672464.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:44.931Z,1509672464.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:45.324Z,1509672465.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:45.339Z,1509672465.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:45.723Z,1509672465.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:45.738Z,1509672465.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:46.123Z,1509672466.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:46.138Z,1509672466.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:46.504Z,1509672466.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:46.535Z,1509672466.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:46.897Z,1509672466.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:46.928Z,1509672466.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:47.302Z,1509672467.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:47.333Z,1509672467.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:47.701Z,1509672467.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:47.716Z,1509672467.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:48.114Z,1509672468.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:48.147Z,1509672468.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:48.514Z,1509672468.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:48.547Z,1509672468.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:48.914Z,1509672468.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:48.941Z,1509672468.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:49.300Z,1509672469.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:49.316Z,1509672469.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:49.700Z,1509672469.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:49.744Z,1509672469.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:50.103Z,1509672470.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:50.118Z,1509672470.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:50.500Z,1509672470.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:50.543Z,1509672470.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:50.913Z,1509672470.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:50.943Z,1509672470.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:51.317Z,1509672471.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:51.350Z,1509672471.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:51.714Z,1509672471.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:51.749Z,1509672471.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:52.104Z,1509672472.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:52.123Z,1509672472.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:52.507Z,1509672472.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:52.522Z,1509672472.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:52.900Z,1509672472.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:52.915Z,1509672472.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:53.305Z,1509672473.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:53.320Z,1509672473.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:53.707Z,1509672473.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:53.722Z,1509672473.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:54.118Z,1509672474.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:54.149Z,1509672474.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:54.518Z,1509672474.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:54.549Z,1509672474.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:54.918Z,1509672474.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:54.948Z,1509672474.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:55.304Z,1509672475.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:55.319Z,1509672475.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:55.703Z,1509672475.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:55.770Z,1509672475.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:56.109Z,1509672476.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:56.125Z,1509672476.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:56.508Z,1509672476.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:56.524Z,1509672476.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:56.922Z,1509672476.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:56.971Z,1509672476.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:57.321Z,1509672477.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:57.352Z,1509672477.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:57.708Z,1509672477.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:57.756Z,1509672477.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:58.108Z,1509672478.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:58.155Z,1509672478.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:58.507Z,1509672478.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:58.523Z,1509672478.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:58.908Z,1509672478.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:58.931Z,1509672478.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:59.308Z,1509672479.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:59.331Z,1509672479.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:27:59.708Z,1509672479.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:27:59.731Z,1509672479.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:00.122Z,1509672480.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:00.151Z,1509672480.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:00.513Z,1509672480.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:00.550Z,1509672480.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:00.922Z,1509672480.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:00.952Z,1509672480.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:01.307Z,1509672481.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:01.323Z,1509672481.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:01.706Z,1509672481.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:01.722Z,1509672481.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:02.108Z,1509672482.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:02.131Z,1509672482.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:02.505Z,1509672482.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:02.521Z,1509672482.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:02.913Z,1509672482.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:02.950Z,1509672482.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:03.321Z,1509672483.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:03.349Z,1509672483.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:03.710Z,1509672483.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:03.725Z,1509672483.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:04.108Z,1509672484.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:04.123Z,1509672484.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:04.508Z,1509672484.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:04.524Z,1509672484.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:04.907Z,1509672484.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:04.923Z,1509672484.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:05.308Z,1509672485.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:05.323Z,1509672485.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:05.708Z,1509672485.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:05.724Z,1509672485.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:06.114Z,1509672486.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:06.130Z,1509672486.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:06.483Z,1509672486.483 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T01:28:06.483Z,1509672486.483 [NAL9602] Data Fault, FailCount= 2
2017-11-03T01:28:06.484Z,1509672486.484 [NAL9602](ERROR): Data Fault
2017-11-03T01:28:06.507Z,1509672486.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:06.539Z,1509672486.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:06.628Z,1509672486.628 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T01:28:06.886Z,1509672486.886 [NAL9602](INFO): Powering down
2017-11-03T01:28:06.918Z,1509672486.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:06.933Z,1509672486.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:07.310Z,1509672487.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:07.326Z,1509672487.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:07.709Z,1509672487.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:07.723Z,1509672487.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:07.808Z,1509672487.808 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T01:28:07.808Z,1509672487.808 [NAL9602] No Fault, FailCount= 2
2017-11-03T01:28:08.110Z,1509672488.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:08.131Z,1509672488.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:08.511Z,1509672488.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:08.527Z,1509672488.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:08.909Z,1509672488.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:08.943Z,1509672488.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:09.310Z,1509672489.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:09.325Z,1509672489.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:09.710Z,1509672489.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:09.725Z,1509672489.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:10.099Z,1509672490.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:10.126Z,1509672490.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:10.497Z,1509672490.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:10.559Z,1509672490.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:10.911Z,1509672490.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:10.926Z,1509672490.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:11.312Z,1509672491.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:11.351Z,1509672491.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:11.711Z,1509672491.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:11.727Z,1509672491.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:12.110Z,1509672492.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:12.168Z,1509672492.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:12.509Z,1509672492.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:12.551Z,1509672492.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:12.910Z,1509672492.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:12.926Z,1509672492.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:13.310Z,1509672493.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:13.327Z,1509672493.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:13.708Z,1509672493.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:13.727Z,1509672493.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:14.110Z,1509672494.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:14.125Z,1509672494.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:14.510Z,1509672494.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:14.526Z,1509672494.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:14.900Z,1509672494.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:14.926Z,1509672494.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:15.296Z,1509672495.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:15.321Z,1509672495.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:15.710Z,1509672495.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:15.726Z,1509672495.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:16.109Z,1509672496.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:16.125Z,1509672496.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:16.492Z,1509672496.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:16.526Z,1509672496.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:16.896Z,1509672496.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:16.923Z,1509672496.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:17.311Z,1509672497.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:17.326Z,1509672497.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:17.692Z,1509672497.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:17.722Z,1509672497.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:18.109Z,1509672498.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:18.125Z,1509672498.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:18.510Z,1509672498.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:18.525Z,1509672498.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:18.896Z,1509672498.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:18.923Z,1509672498.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:19.296Z,1509672499.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:19.323Z,1509672499.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:19.700Z,1509672499.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:19.726Z,1509672499.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:20.110Z,1509672500.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:20.130Z,1509672500.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:20.510Z,1509672500.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:20.526Z,1509672500.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:20.909Z,1509672500.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:20.925Z,1509672500.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:21.300Z,1509672501.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:21.326Z,1509672501.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:21.711Z,1509672501.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:21.726Z,1509672501.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:22.100Z,1509672502.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:22.127Z,1509672502.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:22.510Z,1509672502.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:22.530Z,1509672502.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:22.896Z,1509672502.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:22.957Z,1509672502.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:23.300Z,1509672503.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:23.325Z,1509672503.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:23.710Z,1509672503.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:23.730Z,1509672503.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:24.099Z,1509672504.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:24.126Z,1509672504.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:24.511Z,1509672504.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:24.543Z,1509672504.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:24.897Z,1509672504.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:24.922Z,1509672504.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:25.311Z,1509672505.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:25.327Z,1509672505.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:25.710Z,1509672505.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:25.767Z,1509672505.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:26.096Z,1509672506.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:26.122Z,1509672506.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:26.511Z,1509672506.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:26.567Z,1509672506.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:26.910Z,1509672506.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:26.952Z,1509672506.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:27.310Z,1509672507.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:27.326Z,1509672507.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:27.710Z,1509672507.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:27.727Z,1509672507.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:28.109Z,1509672508.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:28.125Z,1509672508.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:28.500Z,1509672508.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:28.526Z,1509672508.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:28.910Z,1509672508.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:28.925Z,1509672508.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:29.300Z,1509672509.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:29.325Z,1509672509.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:29.700Z,1509672509.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:29.725Z,1509672509.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:30.100Z,1509672510.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:30.126Z,1509672510.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:30.500Z,1509672510.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:30.525Z,1509672510.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:30.896Z,1509672510.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:30.921Z,1509672510.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:31.300Z,1509672511.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:31.326Z,1509672511.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:31.700Z,1509672511.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:31.725Z,1509672511.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:32.110Z,1509672512.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:32.125Z,1509672512.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:32.509Z,1509672512.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:32.525Z,1509672512.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:32.900Z,1509672512.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:32.925Z,1509672512.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:33.310Z,1509672513.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:33.325Z,1509672513.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:33.699Z,1509672513.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:33.731Z,1509672513.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:34.100Z,1509672514.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:34.130Z,1509672514.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:34.502Z,1509672514.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:34.528Z,1509672514.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:34.901Z,1509672514.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:34.930Z,1509672514.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:35.301Z,1509672515.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:35.330Z,1509672515.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:35.702Z,1509672515.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:35.728Z,1509672515.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:36.100Z,1509672516.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:36.131Z,1509672516.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:36.500Z,1509672516.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:36.530Z,1509672516.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:36.902Z,1509672516.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:36.928Z,1509672516.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:37.283Z,1509672517.283 [NAL9602](INFO): Powering up NAL9602
2017-11-03T01:28:37.302Z,1509672517.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:37.363Z,1509672517.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:37.700Z,1509672517.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:37.735Z,1509672517.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:38.102Z,1509672518.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:38.140Z,1509672518.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:38.500Z,1509672518.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:38.515Z,1509672518.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:38.900Z,1509672518.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:38.964Z,1509672518.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:39.300Z,1509672519.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:39.314Z,1509672519.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:39.703Z,1509672519.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:39.759Z,1509672519.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:40.102Z,1509672520.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:40.139Z,1509672520.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:40.499Z,1509672520.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:40.551Z,1509672520.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:40.900Z,1509672520.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:40.959Z,1509672520.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:41.301Z,1509672521.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:41.317Z,1509672521.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:41.701Z,1509672521.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:41.717Z,1509672521.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:44.791Z,1509672524.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:44.807Z,1509672524.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:44.915Z,1509672524.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:44.947Z,1509672524.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:45.313Z,1509672525.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:45.339Z,1509672525.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:45.720Z,1509672525.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:45.745Z,1509672525.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:46.114Z,1509672526.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:46.150Z,1509672526.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:46.512Z,1509672526.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:46.547Z,1509672526.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:46.917Z,1509672526.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:46.945Z,1509672526.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:47.317Z,1509672527.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:47.351Z,1509672527.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:47.738Z,1509672527.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:47.753Z,1509672527.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:48.100Z,1509672528.100 [NAL9602](INFO): NAL9602 initialized
2017-11-03T01:28:48.117Z,1509672528.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:48.147Z,1509672528.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:48.517Z,1509672528.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:48.550Z,1509672528.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:48.942Z,1509672528.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:48.963Z,1509672528.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:49.338Z,1509672529.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:49.353Z,1509672529.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:49.717Z,1509672529.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:49.750Z,1509672529.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:50.118Z,1509672530.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:50.145Z,1509672530.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:50.519Z,1509672530.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:50.546Z,1509672530.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:50.938Z,1509672530.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:50.956Z,1509672530.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:51.336Z,1509672531.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:51.367Z,1509672531.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:51.738Z,1509672531.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:51.759Z,1509672531.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:52.118Z,1509672532.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:52.144Z,1509672532.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:52.518Z,1509672532.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:52.550Z,1509672532.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:52.912Z,1509672532.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:52.948Z,1509672532.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:53.316Z,1509672533.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:53.374Z,1509672533.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:53.712Z,1509672533.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:53.752Z,1509672533.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:54.139Z,1509672534.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:54.195Z,1509672534.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:54.538Z,1509672534.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:54.553Z,1509672534.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:54.939Z,1509672534.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:54.996Z,1509672534.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:55.320Z,1509672535.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:55.374Z,1509672535.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:55.717Z,1509672535.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:55.748Z,1509672535.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:56.120Z,1509672536.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:56.158Z,1509672536.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:56.519Z,1509672536.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:56.556Z,1509672536.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:56.930Z,1509672536.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:56.957Z,1509672536.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:57.342Z,1509672537.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:57.362Z,1509672537.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:57.726Z,1509672537.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:57.752Z,1509672537.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:58.120Z,1509672538.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:58.151Z,1509672538.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:58.519Z,1509672538.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:58.534Z,1509672538.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:58.918Z,1509672538.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:58.933Z,1509672538.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:59.325Z,1509672539.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:59.359Z,1509672539.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:28:59.717Z,1509672539.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:28:59.732Z,1509672539.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:00.131Z,1509672540.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:00.163Z,1509672540.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:00.531Z,1509672540.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:00.555Z,1509672540.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:00.930Z,1509672540.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:00.954Z,1509672540.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:01.316Z,1509672541.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:01.332Z,1509672541.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:01.719Z,1509672541.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:01.759Z,1509672541.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:02.124Z,1509672542.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:02.159Z,1509672542.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:02.519Z,1509672542.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:02.558Z,1509672542.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:02.930Z,1509672542.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:02.954Z,1509672542.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:03.345Z,1509672543.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:03.359Z,1509672543.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:03.730Z,1509672543.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:03.754Z,1509672543.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:04.117Z,1509672544.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:04.132Z,1509672544.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:04.520Z,1509672544.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:04.535Z,1509672544.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:04.917Z,1509672544.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:04.933Z,1509672544.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:05.319Z,1509672545.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:05.334Z,1509672545.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:05.716Z,1509672545.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:05.774Z,1509672545.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:06.131Z,1509672546.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:06.155Z,1509672546.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:06.531Z,1509672546.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:06.561Z,1509672546.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:06.931Z,1509672546.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:06.955Z,1509672546.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:07.319Z,1509672547.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:07.335Z,1509672547.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:07.715Z,1509672547.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:07.756Z,1509672547.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:08.116Z,1509672548.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:08.131Z,1509672548.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:08.515Z,1509672548.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:08.531Z,1509672548.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:08.930Z,1509672548.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:08.983Z,1509672548.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:09.325Z,1509672549.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:09.361Z,1509672549.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:09.730Z,1509672549.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:09.778Z,1509672549.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:10.123Z,1509672550.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:10.162Z,1509672550.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:10.515Z,1509672550.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:10.564Z,1509672550.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:10.916Z,1509672550.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:10.931Z,1509672550.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:11.321Z,1509672551.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:11.336Z,1509672551.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:11.720Z,1509672551.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:11.734Z,1509672551.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:12.130Z,1509672552.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:12.161Z,1509672552.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:12.534Z,1509672552.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:12.563Z,1509672552.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:12.930Z,1509672552.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:12.961Z,1509672552.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:13.316Z,1509672553.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:13.331Z,1509672553.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:13.720Z,1509672553.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:13.735Z,1509672553.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:14.116Z,1509672554.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:14.131Z,1509672554.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:14.516Z,1509672554.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:14.531Z,1509672554.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:14.934Z,1509672554.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:14.963Z,1509672554.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:15.329Z,1509672555.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:15.363Z,1509672555.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:15.730Z,1509672555.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:15.763Z,1509672555.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:16.123Z,1509672556.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:16.143Z,1509672556.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:16.515Z,1509672556.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:16.530Z,1509672556.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:16.916Z,1509672556.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:16.931Z,1509672556.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:17.321Z,1509672557.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:17.336Z,1509672557.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:17.723Z,1509672557.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:17.738Z,1509672557.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:18.130Z,1509672558.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:18.162Z,1509672558.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:18.537Z,1509672558.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:18.562Z,1509672558.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:18.934Z,1509672558.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:18.965Z,1509672558.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:19.315Z,1509672559.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:19.335Z,1509672559.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:19.720Z,1509672559.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:19.743Z,1509672559.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:20.116Z,1509672560.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:20.131Z,1509672560.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:20.516Z,1509672560.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:20.531Z,1509672560.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:20.934Z,1509672560.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:20.965Z,1509672560.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:21.333Z,1509672561.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:21.409Z,1509672561.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:21.727Z,1509672561.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:21.747Z,1509672561.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:22.125Z,1509672562.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:22.147Z,1509672562.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:22.528Z,1509672562.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:22.543Z,1509672562.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:22.921Z,1509672562.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:22.990Z,1509672562.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:23.326Z,1509672563.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:23.341Z,1509672563.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:23.726Z,1509672563.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:23.778Z,1509672563.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:24.132Z,1509672564.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:24.147Z,1509672564.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:24.532Z,1509672564.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:24.579Z,1509672564.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:24.932Z,1509672564.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:24.954Z,1509672564.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:25.321Z,1509672565.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:25.378Z,1509672565.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:25.725Z,1509672565.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:25.740Z,1509672565.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:26.127Z,1509672566.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:26.142Z,1509672566.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:26.529Z,1509672566.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:26.543Z,1509672566.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:26.933Z,1509672566.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:26.955Z,1509672566.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:27.333Z,1509672567.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:27.348Z,1509672567.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:27.734Z,1509672567.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:27.749Z,1509672567.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:28.125Z,1509672568.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:28.140Z,1509672568.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:28.529Z,1509672568.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:28.543Z,1509672568.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:28.918Z,1509672568.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:28.938Z,1509672568.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:29.327Z,1509672569.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:29.342Z,1509672569.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:29.729Z,1509672569.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:29.743Z,1509672569.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:30.135Z,1509672570.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:30.155Z,1509672570.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:30.534Z,1509672570.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:30.555Z,1509672570.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:30.933Z,1509672570.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:30.954Z,1509672570.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:31.321Z,1509672571.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:31.336Z,1509672571.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:31.726Z,1509672571.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:31.741Z,1509672571.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:32.129Z,1509672572.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:32.144Z,1509672572.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:32.527Z,1509672572.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:32.551Z,1509672572.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:32.932Z,1509672572.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:32.948Z,1509672572.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:33.334Z,1509672573.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:33.354Z,1509672573.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:33.733Z,1509672573.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:33.749Z,1509672573.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:34.127Z,1509672574.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:34.142Z,1509672574.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:34.529Z,1509672574.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:34.544Z,1509672574.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:34.926Z,1509672574.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:34.941Z,1509672574.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:35.326Z,1509672575.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:35.341Z,1509672575.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:35.729Z,1509672575.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:35.744Z,1509672575.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:36.133Z,1509672576.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:36.195Z,1509672576.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:36.532Z,1509672576.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:36.547Z,1509672576.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:36.934Z,1509672576.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:36.948Z,1509672576.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:37.322Z,1509672577.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:37.390Z,1509672577.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:37.726Z,1509672577.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:37.741Z,1509672577.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:38.130Z,1509672578.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:38.145Z,1509672578.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:38.528Z,1509672578.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:38.586Z,1509672578.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:38.937Z,1509672578.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:38.959Z,1509672578.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:39.337Z,1509672579.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:39.376Z,1509672579.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:39.738Z,1509672579.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:39.795Z,1509672579.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:40.125Z,1509672580.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:40.141Z,1509672580.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:40.529Z,1509672580.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:40.544Z,1509672580.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:40.928Z,1509672580.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:40.943Z,1509672580.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:41.329Z,1509672581.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:41.344Z,1509672581.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:41.728Z,1509672581.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:41.743Z,1509672581.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:44.835Z,1509672584.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:44.855Z,1509672584.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:45.019Z,1509672585.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:45.050Z,1509672585.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:45.406Z,1509672585.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:45.432Z,1509672585.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:45.799Z,1509672585.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:45.834Z,1509672585.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:46.194Z,1509672586.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:46.209Z,1509672586.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:46.593Z,1509672586.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:46.607Z,1509672586.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:47.006Z,1509672587.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:47.032Z,1509672587.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:47.405Z,1509672587.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:47.432Z,1509672587.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:47.805Z,1509672587.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:47.838Z,1509672587.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:48.191Z,1509672588.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:48.207Z,1509672588.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:48.593Z,1509672588.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:48.608Z,1509672588.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:48.993Z,1509672588.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:49.007Z,1509672589.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:49.397Z,1509672589.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:49.430Z,1509672589.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:49.792Z,1509672589.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:49.807Z,1509672589.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:50.205Z,1509672590.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:50.233Z,1509672590.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:50.605Z,1509672590.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:50.632Z,1509672590.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:51.005Z,1509672591.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:51.059Z,1509672591.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:51.393Z,1509672591.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:51.453Z,1509672591.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:51.793Z,1509672591.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:51.809Z,1509672591.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:52.201Z,1509672592.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:52.232Z,1509672592.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:52.592Z,1509672592.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:52.636Z,1509672592.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:53.006Z,1509672593.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:53.036Z,1509672593.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:53.406Z,1509672593.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:53.451Z,1509672593.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:53.805Z,1509672593.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:53.854Z,1509672593.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:54.192Z,1509672594.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:54.207Z,1509672594.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:54.592Z,1509672594.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:54.607Z,1509672594.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:54.991Z,1509672594.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:55.006Z,1509672595.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:55.392Z,1509672595.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:55.407Z,1509672595.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:55.799Z,1509672595.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:55.835Z,1509672595.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:56.205Z,1509672596.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:56.236Z,1509672596.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:56.601Z,1509672596.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:56.632Z,1509672596.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:57.009Z,1509672597.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:57.033Z,1509672597.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:57.392Z,1509672597.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:57.414Z,1509672597.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:57.793Z,1509672597.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:57.808Z,1509672597.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:58.197Z,1509672598.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:58.212Z,1509672598.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:58.599Z,1509672598.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:58.614Z,1509672598.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:59.005Z,1509672599.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:59.036Z,1509672599.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:59.413Z,1509672599.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:59.443Z,1509672599.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:29:59.813Z,1509672599.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:29:59.842Z,1509672599.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:00.192Z,1509672600.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:00.207Z,1509672600.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:00.596Z,1509672600.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:00.611Z,1509672600.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:00.999Z,1509672600.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:01.014Z,1509672601.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:01.400Z,1509672601.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:01.435Z,1509672601.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:01.799Z,1509672601.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:01.838Z,1509672601.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:02.214Z,1509672602.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:02.243Z,1509672602.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:02.605Z,1509672602.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:02.637Z,1509672602.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:03.009Z,1509672603.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:03.033Z,1509672603.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:03.396Z,1509672603.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:03.435Z,1509672603.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:03.799Z,1509672603.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:03.819Z,1509672603.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:04.196Z,1509672604.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:04.219Z,1509672604.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:04.596Z,1509672604.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:04.662Z,1509672604.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:05.005Z,1509672605.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:05.021Z,1509672605.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:05.413Z,1509672605.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:05.441Z,1509672605.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:05.806Z,1509672605.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:05.851Z,1509672605.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:06.197Z,1509672606.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:06.212Z,1509672606.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:06.600Z,1509672606.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:06.651Z,1509672606.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:06.651Z,1509672606.651 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2017-11-03T01:30:06.651Z,1509672606.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:30:06.653Z,1509672606.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:06.653Z,1509672606.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2017-11-03T01:30:06.653Z,1509672606.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:30:06.655Z,1509672606.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:06.655Z,1509672606.655 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2017-11-03T01:30:06.655Z,1509672606.655 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:30:06.737Z,1509672606.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:30:06.737Z,1509672606.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:30:06.737Z,1509672606.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:30:07.002Z,1509672607.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:07.092Z,1509672607.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:30:07.093Z,1509672607.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2017-11-03T01:30:07.093Z,1509672607.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:30:07.093Z,1509672607.093 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2017-11-03T01:30:07.094Z,1509672607.094 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:30:07.094Z,1509672607.094 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2017-11-03T01:30:07.395Z,1509672607.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:07.453Z,1509672607.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:30:07.453Z,1509672607.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:30:07.454Z,1509672607.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:30:07.454Z,1509672607.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:30:07.454Z,1509672607.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:30:07.455Z,1509672607.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:30:07.455Z,1509672607.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:30:07.455Z,1509672607.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:30:07.456Z,1509672607.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:30:07.791Z,1509672607.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:07.848Z,1509672607.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:30:07.849Z,1509672607.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:08.213Z,1509672608.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:08.228Z,1509672608.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:30:08.229Z,1509672608.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:08.616Z,1509672608.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:08.631Z,1509672608.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:30:08.632Z,1509672608.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:09.013Z,1509672609.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:09.027Z,1509672609.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:30:09.029Z,1509672609.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:09.406Z,1509672609.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:09.421Z,1509672609.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:30:09.422Z,1509672609.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:09.803Z,1509672609.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:09.818Z,1509672609.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:30:09.819Z,1509672609.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:10.201Z,1509672610.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:10.216Z,1509672610.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:30:10.217Z,1509672610.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:10.604Z,1509672610.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:10.619Z,1509672610.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:30:10.620Z,1509672610.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:11.015Z,1509672611.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:11.034Z,1509672611.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:30:11.035Z,1509672611.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:11.413Z,1509672611.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:11.427Z,1509672611.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:30:11.428Z,1509672611.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:11.816Z,1509672611.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:11.831Z,1509672611.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:30:11.832Z,1509672611.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:12.203Z,1509672612.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:12.217Z,1509672612.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:30:12.218Z,1509672612.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:12.601Z,1509672612.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:12.619Z,1509672612.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:30:12.620Z,1509672612.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:13.005Z,1509672613.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:13.019Z,1509672613.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:30:13.021Z,1509672613.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:13.404Z,1509672613.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:13.466Z,1509672613.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:30:13.467Z,1509672613.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:13.793Z,1509672613.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:13.827Z,1509672613.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:30:13.828Z,1509672613.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:14.207Z,1509672614.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:14.227Z,1509672614.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:30:14.229Z,1509672614.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:14.613Z,1509672614.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:14.628Z,1509672614.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:30:14.629Z,1509672614.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:15.014Z,1509672615.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:15.029Z,1509672615.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:30:15.030Z,1509672615.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:15.406Z,1509672615.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:15.421Z,1509672615.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:30:15.422Z,1509672615.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:15.806Z,1509672615.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:15.820Z,1509672615.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:30:15.821Z,1509672615.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:16.195Z,1509672616.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:16.221Z,1509672616.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T01:30:16.222Z,1509672616.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:16.596Z,1509672616.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:16.622Z,1509672616.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:30:16.623Z,1509672616.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:17.017Z,1509672617.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:17.032Z,1509672617.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:30:17.033Z,1509672617.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:17.414Z,1509672617.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:17.429Z,1509672617.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:30:17.430Z,1509672617.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:17.818Z,1509672617.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:17.838Z,1509672617.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:30:17.839Z,1509672617.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:18.189Z,1509672618.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:18.218Z,1509672618.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:30:18.218Z,1509672618.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:18.593Z,1509672618.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:18.612Z,1509672618.612 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:30:18.612Z,1509672618.612 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:30:18.612Z,1509672618.612 [BPC1](ERROR): Data Fault
2017-11-03T01:30:18.620Z,1509672618.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:30:18.621Z,1509672618.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:18.720Z,1509672618.720 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:30:18.995Z,1509672618.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:19.027Z,1509672619.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:30:19.028Z,1509672619.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:19.390Z,1509672619.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:19.415Z,1509672619.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:30:19.416Z,1509672619.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:19.793Z,1509672619.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:19.825Z,1509672619.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:30:19.826Z,1509672619.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:19.905Z,1509672619.905 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:30:19.905Z,1509672619.905 [BPC1] No Fault, FailCount= 1
2017-11-03T01:30:20.217Z,1509672620.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:20.294Z,1509672620.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:30:20.295Z,1509672620.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:20.617Z,1509672620.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:20.632Z,1509672620.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:30:20.633Z,1509672620.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:21.014Z,1509672621.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:21.069Z,1509672621.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:30:21.070Z,1509672621.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:21.395Z,1509672621.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:21.420Z,1509672621.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:30:21.421Z,1509672621.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:21.796Z,1509672621.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:21.821Z,1509672621.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:30:21.822Z,1509672621.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:22.193Z,1509672622.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:22.219Z,1509672622.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:30:22.220Z,1509672622.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:22.595Z,1509672622.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:22.620Z,1509672622.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:30:22.621Z,1509672622.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:23.010Z,1509672623.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:23.024Z,1509672623.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:30:23.025Z,1509672623.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:23.413Z,1509672623.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:23.428Z,1509672623.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:30:23.429Z,1509672623.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:23.815Z,1509672623.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:23.829Z,1509672623.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:30:23.830Z,1509672623.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:24.189Z,1509672624.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:24.216Z,1509672624.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:30:24.217Z,1509672624.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:24.592Z,1509672624.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:24.626Z,1509672624.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:30:24.626Z,1509672624.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:24.989Z,1509672624.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:25.022Z,1509672625.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:30:25.023Z,1509672625.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:25.390Z,1509672625.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:25.416Z,1509672625.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:30:25.417Z,1509672625.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:25.793Z,1509672625.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:25.820Z,1509672625.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T01:30:25.821Z,1509672625.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:26.218Z,1509672626.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:26.232Z,1509672626.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:30:26.233Z,1509672626.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:26.607Z,1509672626.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:26.627Z,1509672626.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T01:30:26.629Z,1509672626.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:27.014Z,1509672627.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:27.029Z,1509672627.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:27.389Z,1509672627.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:27.416Z,1509672627.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:27.793Z,1509672627.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:27.819Z,1509672627.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:28.193Z,1509672628.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:28.220Z,1509672628.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:28.596Z,1509672628.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:28.622Z,1509672628.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:29.017Z,1509672629.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:29.032Z,1509672629.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:29.414Z,1509672629.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:29.429Z,1509672629.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:29.821Z,1509672629.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:29.836Z,1509672629.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:30.195Z,1509672630.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:30.222Z,1509672630.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:30.595Z,1509672630.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:30.627Z,1509672630.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:30.995Z,1509672630.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:31.022Z,1509672631.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:31.396Z,1509672631.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:31.422Z,1509672631.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:31.793Z,1509672631.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:31.818Z,1509672631.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:32.217Z,1509672632.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:32.233Z,1509672632.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:32.613Z,1509672632.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:32.674Z,1509672632.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:33.013Z,1509672633.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:33.083Z,1509672633.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:33.395Z,1509672633.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:33.421Z,1509672633.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:33.793Z,1509672633.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:33.819Z,1509672633.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:34.193Z,1509672634.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:34.262Z,1509672634.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:34.589Z,1509672634.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:34.618Z,1509672634.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:35.013Z,1509672635.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:35.067Z,1509672635.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:35.413Z,1509672635.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:35.471Z,1509672635.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:35.817Z,1509672635.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:35.838Z,1509672635.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:36.193Z,1509672636.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:36.218Z,1509672636.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:36.593Z,1509672636.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:36.618Z,1509672636.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:36.995Z,1509672636.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:37.021Z,1509672637.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:37.394Z,1509672637.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:37.419Z,1509672637.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:37.793Z,1509672637.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:37.821Z,1509672637.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:38.209Z,1509672638.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:38.224Z,1509672638.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:38.613Z,1509672638.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:38.628Z,1509672638.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:39.012Z,1509672639.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:39.027Z,1509672639.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:39.406Z,1509672639.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:39.420Z,1509672639.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:39.793Z,1509672639.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:39.819Z,1509672639.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:40.196Z,1509672640.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:40.221Z,1509672640.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:40.588Z,1509672640.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:40.618Z,1509672640.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:41.013Z,1509672641.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:41.028Z,1509672641.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:41.413Z,1509672641.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:41.428Z,1509672641.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:41.813Z,1509672641.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:41.828Z,1509672641.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:44.908Z,1509672644.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:44.924Z,1509672644.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:45.067Z,1509672645.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:45.109Z,1509672645.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:45.472Z,1509672645.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:45.488Z,1509672645.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:45.873Z,1509672645.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:45.895Z,1509672645.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:46.272Z,1509672646.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:46.287Z,1509672646.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:46.668Z,1509672646.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:46.683Z,1509672646.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:47.065Z,1509672647.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:47.081Z,1509672647.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:47.464Z,1509672647.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:47.534Z,1509672647.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:47.873Z,1509672647.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:47.931Z,1509672647.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:48.273Z,1509672648.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:48.295Z,1509672648.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:48.671Z,1509672648.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:48.723Z,1509672648.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:49.068Z,1509672649.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:49.082Z,1509672649.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:49.464Z,1509672649.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:49.522Z,1509672649.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:49.872Z,1509672649.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:49.926Z,1509672649.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:50.272Z,1509672650.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:50.287Z,1509672650.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:50.672Z,1509672650.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:50.688Z,1509672650.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:51.063Z,1509672651.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:51.083Z,1509672651.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:51.467Z,1509672651.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:51.482Z,1509672651.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:51.872Z,1509672651.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:51.895Z,1509672651.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:52.271Z,1509672652.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:52.291Z,1509672652.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:52.672Z,1509672652.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:52.687Z,1509672652.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:53.065Z,1509672653.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:53.080Z,1509672653.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:53.464Z,1509672653.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:53.479Z,1509672653.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:53.872Z,1509672653.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:53.887Z,1509672653.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:54.272Z,1509672654.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:54.287Z,1509672654.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:54.672Z,1509672654.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:54.687Z,1509672654.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:55.069Z,1509672655.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:55.083Z,1509672655.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:55.465Z,1509672655.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:55.480Z,1509672655.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:55.872Z,1509672655.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:55.887Z,1509672655.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:56.275Z,1509672656.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:56.318Z,1509672656.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:56.674Z,1509672656.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:56.691Z,1509672656.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:57.055Z,1509672657.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:57.089Z,1509672657.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:57.457Z,1509672657.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:57.507Z,1509672657.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:57.887Z,1509672657.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:57.911Z,1509672657.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:58.304Z,1509672658.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:58.339Z,1509672658.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:58.678Z,1509672658.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:58.742Z,1509672658.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:59.088Z,1509672659.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:59.137Z,1509672659.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:59.457Z,1509672659.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:59.487Z,1509672659.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:30:59.918Z,1509672659.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:30:59.934Z,1509672659.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:00.293Z,1509672660.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:00.329Z,1509672660.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:00.676Z,1509672660.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:00.700Z,1509672660.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:01.058Z,1509672661.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:01.093Z,1509672661.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:01.457Z,1509672661.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:01.499Z,1509672661.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:01.895Z,1509672661.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:01.971Z,1509672661.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:02.275Z,1509672662.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:02.326Z,1509672662.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:02.671Z,1509672662.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:02.717Z,1509672662.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:03.066Z,1509672663.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:03.123Z,1509672663.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:03.505Z,1509672663.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:03.564Z,1509672663.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:03.871Z,1509672663.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:03.978Z,1509672663.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:04.302Z,1509672664.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:04.323Z,1509672664.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:04.679Z,1509672664.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:04.763Z,1509672664.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:05.070Z,1509672665.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:05.124Z,1509672665.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:05.465Z,1509672665.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:05.525Z,1509672665.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:05.878Z,1509672665.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:05.931Z,1509672665.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:06.292Z,1509672666.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:06.311Z,1509672666.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:06.670Z,1509672666.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:06.695Z,1509672666.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:07.065Z,1509672667.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:07.091Z,1509672667.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:07.467Z,1509672667.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:07.531Z,1509672667.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:07.891Z,1509672667.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:07.924Z,1509672667.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:08.293Z,1509672668.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:08.322Z,1509672668.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:08.668Z,1509672668.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:08.691Z,1509672668.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:09.064Z,1509672669.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:09.087Z,1509672669.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:09.466Z,1509672669.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:09.481Z,1509672669.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:09.870Z,1509672669.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:09.885Z,1509672669.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:10.269Z,1509672670.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:10.284Z,1509672670.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:10.673Z,1509672670.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:10.688Z,1509672670.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:11.067Z,1509672671.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:11.087Z,1509672671.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:11.464Z,1509672671.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:11.479Z,1509672671.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:11.873Z,1509672671.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:11.888Z,1509672671.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:12.270Z,1509672672.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:12.285Z,1509672672.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:12.669Z,1509672672.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:12.685Z,1509672672.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:13.068Z,1509672673.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:13.083Z,1509672673.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:13.461Z,1509672673.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:13.476Z,1509672673.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:13.870Z,1509672673.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:13.886Z,1509672673.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:14.269Z,1509672674.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:14.284Z,1509672674.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:14.670Z,1509672674.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:14.686Z,1509672674.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:15.065Z,1509672675.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:15.081Z,1509672675.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:15.466Z,1509672675.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:15.482Z,1509672675.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:15.870Z,1509672675.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:15.886Z,1509672675.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:16.269Z,1509672676.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:16.285Z,1509672676.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:16.673Z,1509672676.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:16.757Z,1509672676.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:17.061Z,1509672677.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:17.076Z,1509672677.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:17.466Z,1509672677.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:17.523Z,1509672677.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:17.877Z,1509672677.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:17.891Z,1509672677.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:18.272Z,1509672678.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:18.323Z,1509672678.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:18.676Z,1509672678.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:18.723Z,1509672678.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:19.068Z,1509672679.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:19.082Z,1509672679.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:19.460Z,1509672679.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:19.483Z,1509672679.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:19.876Z,1509672679.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:19.891Z,1509672679.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:20.276Z,1509672680.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:20.291Z,1509672680.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:20.673Z,1509672680.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:20.687Z,1509672680.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:21.065Z,1509672681.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:21.079Z,1509672681.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:21.467Z,1509672681.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:21.482Z,1509672681.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:21.873Z,1509672681.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:21.888Z,1509672681.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:22.275Z,1509672682.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:22.295Z,1509672682.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:22.676Z,1509672682.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:22.691Z,1509672682.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:23.067Z,1509672683.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:23.087Z,1509672683.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:23.464Z,1509672683.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:23.479Z,1509672683.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:23.876Z,1509672683.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:23.891Z,1509672683.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:24.276Z,1509672684.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:24.291Z,1509672684.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:24.737Z,1509672684.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:24.752Z,1509672684.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:25.065Z,1509672685.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:25.080Z,1509672685.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:25.449Z,1509672685.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:25.477Z,1509672685.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:25.866Z,1509672685.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:25.887Z,1509672685.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:26.264Z,1509672686.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:26.279Z,1509672686.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:26.667Z,1509672686.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:26.687Z,1509672686.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:27.076Z,1509672687.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:27.099Z,1509672687.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:27.473Z,1509672687.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:27.487Z,1509672687.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:27.876Z,1509672687.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:27.891Z,1509672687.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:28.264Z,1509672688.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:28.279Z,1509672688.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:28.668Z,1509672688.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:28.682Z,1509672688.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:29.067Z,1509672689.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:29.087Z,1509672689.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:29.466Z,1509672689.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:29.487Z,1509672689.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:29.876Z,1509672689.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:29.895Z,1509672689.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:30.276Z,1509672690.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:30.291Z,1509672690.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:30.676Z,1509672690.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:30.755Z,1509672690.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:31.059Z,1509672691.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:31.085Z,1509672691.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:31.459Z,1509672691.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:31.520Z,1509672691.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:31.877Z,1509672691.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:31.892Z,1509672691.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:32.277Z,1509672692.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:32.323Z,1509672692.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:32.678Z,1509672692.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:32.731Z,1509672692.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:33.057Z,1509672693.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:33.091Z,1509672693.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:33.456Z,1509672693.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:33.487Z,1509672693.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:33.878Z,1509672693.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:33.893Z,1509672693.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:34.277Z,1509672694.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:34.292Z,1509672694.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:34.682Z,1509672694.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:34.697Z,1509672694.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:35.056Z,1509672695.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:35.083Z,1509672695.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:35.457Z,1509672695.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:35.487Z,1509672695.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:35.881Z,1509672695.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:35.896Z,1509672695.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:36.282Z,1509672696.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:36.297Z,1509672696.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:36.677Z,1509672696.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:36.693Z,1509672696.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:37.070Z,1509672697.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:37.085Z,1509672697.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:37.453Z,1509672697.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:37.487Z,1509672697.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:37.878Z,1509672697.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:37.893Z,1509672697.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:38.282Z,1509672698.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:38.297Z,1509672698.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:38.669Z,1509672698.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:38.691Z,1509672698.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:39.057Z,1509672699.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:39.091Z,1509672699.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:39.177Z,1509672699.177 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T01:31:39.459Z,1509672699.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:39.485Z,1509672699.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:39.877Z,1509672699.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:39.893Z,1509672699.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:40.277Z,1509672700.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:40.293Z,1509672700.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:40.682Z,1509672700.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:40.697Z,1509672700.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:41.060Z,1509672701.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:41.085Z,1509672701.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:41.457Z,1509672701.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:41.487Z,1509672701.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:41.882Z,1509672701.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:41.897Z,1509672701.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:44.979Z,1509672704.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:45.070Z,1509672705.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:45.219Z,1509672705.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:45.253Z,1509672705.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:45.599Z,1509672705.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:45.652Z,1509672705.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:45.996Z,1509672705.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:46.011Z,1509672706.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:46.400Z,1509672706.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:46.459Z,1509672706.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:46.792Z,1509672706.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:46.807Z,1509672706.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:47.206Z,1509672707.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:47.252Z,1509672707.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:47.606Z,1509672707.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:47.642Z,1509672707.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:48.009Z,1509672708.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:48.041Z,1509672708.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:48.398Z,1509672708.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:48.413Z,1509672708.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:48.797Z,1509672708.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:48.812Z,1509672708.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:49.196Z,1509672709.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:49.211Z,1509672709.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:49.597Z,1509672709.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:49.612Z,1509672709.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:50.010Z,1509672710.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:50.040Z,1509672710.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:50.410Z,1509672710.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:50.435Z,1509672710.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:50.802Z,1509672710.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:50.817Z,1509672710.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:51.195Z,1509672711.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:51.219Z,1509672711.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:51.595Z,1509672711.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:51.611Z,1509672711.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:51.995Z,1509672711.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:52.012Z,1509672712.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:52.396Z,1509672712.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:52.419Z,1509672712.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:52.795Z,1509672712.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:52.810Z,1509672712.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:53.210Z,1509672713.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:53.240Z,1509672713.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:53.610Z,1509672713.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:53.644Z,1509672713.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:54.009Z,1509672714.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:54.043Z,1509672714.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:54.397Z,1509672714.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:54.412Z,1509672714.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:54.800Z,1509672714.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:54.815Z,1509672714.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:55.196Z,1509672715.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:55.211Z,1509672715.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:55.595Z,1509672715.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:55.611Z,1509672715.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:56.010Z,1509672716.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:56.042Z,1509672716.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:56.409Z,1509672716.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:56.439Z,1509672716.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:56.810Z,1509672716.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:56.842Z,1509672716.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:57.196Z,1509672717.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:57.211Z,1509672717.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:57.597Z,1509672717.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:57.611Z,1509672717.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:57.997Z,1509672717.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:58.013Z,1509672718.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:58.397Z,1509672718.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:58.412Z,1509672718.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:58.796Z,1509672718.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:58.811Z,1509672718.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:59.210Z,1509672719.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:59.291Z,1509672719.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:31:59.613Z,1509672719.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:31:59.643Z,1509672719.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:00.014Z,1509672720.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:00.073Z,1509672720.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:00.400Z,1509672720.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:00.415Z,1509672720.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:00.798Z,1509672720.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:00.855Z,1509672720.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:01.201Z,1509672721.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:01.243Z,1509672721.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:01.596Z,1509672721.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:01.611Z,1509672721.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:02.006Z,1509672722.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:02.021Z,1509672722.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:02.413Z,1509672722.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:02.444Z,1509672722.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:02.814Z,1509672722.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:02.843Z,1509672722.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:03.198Z,1509672723.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:03.219Z,1509672723.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:03.602Z,1509672723.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:03.617Z,1509672723.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:03.998Z,1509672723.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:04.013Z,1509672724.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:04.402Z,1509672724.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:04.417Z,1509672724.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:04.804Z,1509672724.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:04.818Z,1509672724.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:05.206Z,1509672725.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:05.221Z,1509672725.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:05.609Z,1509672725.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:05.629Z,1509672725.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:06.010Z,1509672726.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:06.025Z,1509672726.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:06.396Z,1509672726.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:06.412Z,1509672726.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:06.800Z,1509672726.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:06.816Z,1509672726.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:07.204Z,1509672727.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:07.221Z,1509672727.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:07.596Z,1509672727.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:07.615Z,1509672727.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:08.008Z,1509672728.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:08.024Z,1509672728.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:08.408Z,1509672728.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:08.433Z,1509672728.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:08.808Z,1509672728.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:08.828Z,1509672728.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:09.200Z,1509672729.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:09.215Z,1509672729.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:09.604Z,1509672729.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:09.618Z,1509672729.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:10.003Z,1509672730.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:10.023Z,1509672730.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:10.401Z,1509672730.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:10.416Z,1509672730.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:10.804Z,1509672730.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:10.819Z,1509672730.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:11.210Z,1509672731.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:11.225Z,1509672731.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:11.613Z,1509672731.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:11.629Z,1509672731.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:12.017Z,1509672732.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:12.059Z,1509672732.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:12.403Z,1509672732.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:12.418Z,1509672732.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:12.801Z,1509672732.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:12.860Z,1509672732.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:13.204Z,1509672733.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:13.277Z,1509672733.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:13.588Z,1509672733.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:13.614Z,1509672733.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:14.013Z,1509672734.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:14.075Z,1509672734.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:14.414Z,1509672734.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:14.429Z,1509672734.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:14.809Z,1509672734.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:14.866Z,1509672734.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:15.201Z,1509672735.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:15.259Z,1509672735.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:15.604Z,1509672735.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:15.619Z,1509672735.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:15.991Z,1509672735.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:16.017Z,1509672736.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:16.402Z,1509672736.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:16.417Z,1509672736.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:16.805Z,1509672736.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:16.830Z,1509672736.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:17.213Z,1509672737.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:17.228Z,1509672737.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:17.613Z,1509672737.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:17.628Z,1509672737.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:18.017Z,1509672738.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:18.034Z,1509672738.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:18.388Z,1509672738.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:18.414Z,1509672738.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:18.800Z,1509672738.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:18.823Z,1509672738.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:19.204Z,1509672739.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:19.219Z,1509672739.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:19.588Z,1509672739.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:19.614Z,1509672739.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:20.013Z,1509672740.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:20.034Z,1509672740.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:20.414Z,1509672740.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:20.429Z,1509672740.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:20.813Z,1509672740.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:20.828Z,1509672740.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:21.202Z,1509672741.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:21.217Z,1509672741.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:21.605Z,1509672741.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:21.622Z,1509672741.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:22.003Z,1509672742.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:22.019Z,1509672742.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:22.401Z,1509672742.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:22.416Z,1509672742.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:22.806Z,1509672742.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:22.822Z,1509672742.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:23.213Z,1509672743.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:23.232Z,1509672743.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:23.613Z,1509672743.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:23.628Z,1509672743.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:24.016Z,1509672744.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:24.031Z,1509672744.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:24.403Z,1509672744.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:24.423Z,1509672744.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:24.801Z,1509672744.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:24.826Z,1509672744.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:25.205Z,1509672745.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:25.221Z,1509672745.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:25.603Z,1509672745.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:25.618Z,1509672745.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:26.014Z,1509672746.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:26.030Z,1509672746.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:26.417Z,1509672746.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:26.436Z,1509672746.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:26.813Z,1509672746.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:26.828Z,1509672746.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:27.201Z,1509672747.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:27.267Z,1509672747.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:27.595Z,1509672747.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:27.667Z,1509672747.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:27.995Z,1509672747.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:28.025Z,1509672748.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:28.394Z,1509672748.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:28.467Z,1509672748.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:28.797Z,1509672748.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:28.826Z,1509672748.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:29.214Z,1509672749.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:29.274Z,1509672749.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:29.619Z,1509672749.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:29.678Z,1509672749.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:30.011Z,1509672750.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:30.042Z,1509672750.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:30.393Z,1509672750.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:30.423Z,1509672750.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:30.795Z,1509672750.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:30.821Z,1509672750.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:31.195Z,1509672751.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:31.225Z,1509672751.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:31.595Z,1509672751.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:31.621Z,1509672751.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:32.011Z,1509672752.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:32.031Z,1509672752.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:32.417Z,1509672752.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:32.435Z,1509672752.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:32.809Z,1509672752.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:32.829Z,1509672752.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:33.192Z,1509672753.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:33.223Z,1509672753.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:33.588Z,1509672753.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:33.623Z,1509672753.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:33.988Z,1509672753.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:34.003Z,1509672754.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:34.397Z,1509672754.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:34.433Z,1509672754.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:34.792Z,1509672754.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:34.807Z,1509672754.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:35.203Z,1509672755.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:35.233Z,1509672755.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:35.605Z,1509672755.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:35.636Z,1509672755.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:36.005Z,1509672756.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:36.035Z,1509672756.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:36.392Z,1509672756.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:36.407Z,1509672756.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:36.796Z,1509672756.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:36.811Z,1509672756.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:37.192Z,1509672757.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:37.207Z,1509672757.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:37.592Z,1509672757.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:37.608Z,1509672757.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:38.010Z,1509672758.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:38.039Z,1509672758.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:38.406Z,1509672758.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:38.434Z,1509672758.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:38.806Z,1509672758.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:38.832Z,1509672758.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:39.192Z,1509672759.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:39.208Z,1509672759.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:39.595Z,1509672759.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:39.610Z,1509672759.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:39.995Z,1509672759.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:40.035Z,1509672760.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:40.393Z,1509672760.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:40.408Z,1509672760.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:40.799Z,1509672760.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:40.834Z,1509672760.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:41.210Z,1509672761.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:41.263Z,1509672761.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:41.613Z,1509672761.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:41.663Z,1509672761.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:42.009Z,1509672762.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:42.044Z,1509672762.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:42.048Z,1509672762.048 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T01:27:41.7Z
2017-11-03T01:32:42.048Z,1509672762.048 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T01:32:42.048Z,1509672762.048 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T01:32:45.087Z,1509672765.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:45.143Z,1509672765.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:45.559Z,1509672765.559 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0032.lzma
2017-11-03T01:32:45.590Z,1509672765.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:45.605Z,1509672765.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:45.894Z,1509672765.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:45.943Z,1509672765.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:46.250Z,1509672766.250 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0032.lzma.bak
2017-11-03T01:32:46.251Z,1509672766.251 [DataOverHttps](INFO): SBD MOMSN=5182387
2017-11-03T01:32:46.302Z,1509672766.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:46.351Z,1509672766.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:46.890Z,1509672766.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:46.905Z,1509672766.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:47.084Z,1509672767.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:47.119Z,1509672767.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:50.179Z,1509672770.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:50.194Z,1509672770.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:50.320Z,1509672770.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:50.371Z,1509672770.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:50.742Z,1509672770.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:50.757Z,1509672770.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:51.142Z,1509672771.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:51.200Z,1509672771.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:51.537Z,1509672771.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:51.553Z,1509672771.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:51.931Z,1509672771.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:51.946Z,1509672771.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:55.017Z,1509672775.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:55.040Z,1509672775.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:55.139Z,1509672775.139 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20171103T001125/Express0033.lzma
2017-11-03T01:32:55.161Z,1509672775.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:55.207Z,1509672775.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:55.585Z,1509672775.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:55.607Z,1509672775.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:55.939Z,1509672775.939 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0033.lzma.bak
2017-11-03T01:32:55.939Z,1509672775.939 [DataOverHttps](INFO): SBD MOMSN=5182389
2017-11-03T01:32:55.997Z,1509672775.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:56.012Z,1509672776.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:56.582Z,1509672776.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:56.603Z,1509672776.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:56.606Z,1509672776.606 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T01:32:56.606Z,1509672776.606 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T01:32:56.606Z,1509672776.606 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T01:32:56.767Z,1509672776.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:56.814Z,1509672776.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:32:59.867Z,1509672779.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:32:59.963Z,1509672779.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:00.112Z,1509672780.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:00.144Z,1509672780.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:00.522Z,1509672780.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:00.555Z,1509672780.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:00.925Z,1509672780.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:00.952Z,1509672780.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:01.322Z,1509672781.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:01.389Z,1509672781.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:01.711Z,1509672781.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:01.747Z,1509672781.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:02.112Z,1509672782.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:02.152Z,1509672782.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:02.507Z,1509672782.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:02.563Z,1509672782.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:02.922Z,1509672782.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:02.955Z,1509672782.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:03.321Z,1509672783.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:03.352Z,1509672783.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:03.722Z,1509672783.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:03.756Z,1509672783.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:04.111Z,1509672784.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:04.127Z,1509672784.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:04.512Z,1509672784.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:04.527Z,1509672784.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:04.912Z,1509672784.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:04.927Z,1509672784.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:05.316Z,1509672785.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:05.355Z,1509672785.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:05.711Z,1509672785.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:05.726Z,1509672785.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:06.126Z,1509672786.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:06.158Z,1509672786.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:06.526Z,1509672786.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:06.557Z,1509672786.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:06.926Z,1509672786.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:06.960Z,1509672786.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:07.310Z,1509672787.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:07.327Z,1509672787.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:07.711Z,1509672787.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:07.727Z,1509672787.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:07.727Z,1509672787.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2017-11-03T01:33:07.727Z,1509672787.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:33:07.729Z,1509672787.729 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:07.730Z,1509672787.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2017-11-03T01:33:07.730Z,1509672787.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:33:07.731Z,1509672787.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:07.731Z,1509672787.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2017-11-03T01:33:07.732Z,1509672787.732 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:33:07.825Z,1509672787.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:33:07.825Z,1509672787.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:33:07.825Z,1509672787.825 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:33:08.119Z,1509672788.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:08.213Z,1509672788.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:33:08.213Z,1509672788.213 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2017-11-03T01:33:08.214Z,1509672788.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:33:08.214Z,1509672788.214 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2017-11-03T01:33:08.214Z,1509672788.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:33:08.214Z,1509672788.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2017-11-03T01:33:08.512Z,1509672788.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:08.526Z,1509672788.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:33:08.527Z,1509672788.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:33:08.527Z,1509672788.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:33:08.527Z,1509672788.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:33:08.528Z,1509672788.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:33:08.528Z,1509672788.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:33:08.529Z,1509672788.529 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:33:08.529Z,1509672788.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:33:08.530Z,1509672788.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:33:08.920Z,1509672788.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:08.954Z,1509672788.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:33:08.955Z,1509672788.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:09.329Z,1509672789.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:09.343Z,1509672789.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:33:09.344Z,1509672789.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:09.726Z,1509672789.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:09.741Z,1509672789.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:33:09.742Z,1509672789.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:10.116Z,1509672790.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:10.131Z,1509672790.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:33:10.132Z,1509672790.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:10.580Z,1509672790.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:10.634Z,1509672790.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-03T01:33:10.635Z,1509672790.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:10.919Z,1509672790.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:10.938Z,1509672790.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:33:10.939Z,1509672790.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:11.318Z,1509672791.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:11.333Z,1509672791.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:33:11.334Z,1509672791.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:11.727Z,1509672791.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:11.742Z,1509672791.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:33:11.743Z,1509672791.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:12.129Z,1509672792.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:12.150Z,1509672792.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:33:12.151Z,1509672792.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:12.542Z,1509672792.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:12.570Z,1509672792.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:33:12.571Z,1509672792.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:12.929Z,1509672792.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:12.950Z,1509672792.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:33:12.951Z,1509672792.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:13.319Z,1509672793.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:13.338Z,1509672793.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:33:13.339Z,1509672793.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:13.710Z,1509672793.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:13.741Z,1509672793.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:33:13.742Z,1509672793.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:14.118Z,1509672794.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:14.132Z,1509672794.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:33:14.133Z,1509672794.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:14.503Z,1509672794.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:14.586Z,1509672794.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T01:33:14.587Z,1509672794.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:14.929Z,1509672794.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:14.950Z,1509672794.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:33:14.951Z,1509672794.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:15.334Z,1509672795.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:15.375Z,1509672795.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:33:15.376Z,1509672795.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:15.727Z,1509672795.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:15.742Z,1509672795.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:33:15.743Z,1509672795.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:16.117Z,1509672796.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:16.178Z,1509672796.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T01:33:16.179Z,1509672796.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:16.520Z,1509672796.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:16.559Z,1509672796.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:33:16.560Z,1509672796.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:16.908Z,1509672796.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:16.976Z,1509672796.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:33:16.978Z,1509672796.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:17.318Z,1509672797.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:17.337Z,1509672797.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T01:33:17.338Z,1509672797.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:17.705Z,1509672797.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:17.732Z,1509672797.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:33:17.733Z,1509672797.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:18.126Z,1509672798.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:18.145Z,1509672798.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:33:18.146Z,1509672798.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:18.531Z,1509672798.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:18.546Z,1509672798.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:33:18.547Z,1509672798.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:18.933Z,1509672798.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:18.954Z,1509672798.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:33:18.955Z,1509672798.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:19.304Z,1509672799.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:19.333Z,1509672799.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:33:19.334Z,1509672799.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:19.717Z,1509672799.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:19.735Z,1509672799.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:33:19.737Z,1509672799.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:20.112Z,1509672800.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:20.149Z,1509672800.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:33:20.149Z,1509672800.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:20.507Z,1509672800.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:20.523Z,1509672800.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:33:20.524Z,1509672800.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:20.922Z,1509672800.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:20.946Z,1509672800.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:33:20.947Z,1509672800.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:21.322Z,1509672801.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:21.346Z,1509672801.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:33:21.347Z,1509672801.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:21.722Z,1509672801.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:21.745Z,1509672801.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:33:21.746Z,1509672801.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:22.115Z,1509672802.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:22.147Z,1509672802.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:33:22.149Z,1509672802.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:22.508Z,1509672802.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:22.522Z,1509672802.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:33:22.523Z,1509672802.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:22.908Z,1509672802.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:22.923Z,1509672802.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:33:22.924Z,1509672802.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:23.316Z,1509672803.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:23.347Z,1509672803.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:33:23.348Z,1509672803.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:23.708Z,1509672803.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:23.730Z,1509672803.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:33:23.731Z,1509672803.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:24.122Z,1509672804.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:24.152Z,1509672804.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:33:24.153Z,1509672804.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:24.526Z,1509672804.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:24.549Z,1509672804.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:33:24.550Z,1509672804.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:24.930Z,1509672804.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:24.954Z,1509672804.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:33:24.955Z,1509672804.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:25.315Z,1509672805.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:25.331Z,1509672805.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:33:25.332Z,1509672805.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:25.715Z,1509672805.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:25.751Z,1509672805.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:33:25.753Z,1509672805.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:26.113Z,1509672806.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:26.127Z,1509672806.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:33:26.128Z,1509672806.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:26.512Z,1509672806.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:26.527Z,1509672806.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:33:26.528Z,1509672806.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:26.926Z,1509672806.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:26.954Z,1509672806.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T01:33:26.955Z,1509672806.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:27.325Z,1509672807.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:27.358Z,1509672807.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:33:27.359Z,1509672807.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:27.726Z,1509672807.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:27.751Z,1509672807.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:28.112Z,1509672808.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:28.128Z,1509672808.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:28.515Z,1509672808.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:28.595Z,1509672808.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:28.908Z,1509672808.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:28.924Z,1509672808.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:29.317Z,1509672809.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:29.332Z,1509672809.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:29.433Z,1509672809.433 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:33:29.433Z,1509672809.433 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T01:33:29.548Z,1509672809.548 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:33:29.549Z,1509672809.549 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:33:29.549Z,1509672809.549 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:33:29.549Z,1509672809.549 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:33:29.715Z,1509672809.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:29.757Z,1509672809.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:30.122Z,1509672810.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:30.153Z,1509672810.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:30.526Z,1509672810.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:30.579Z,1509672810.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:30.926Z,1509672810.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:30.978Z,1509672810.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:31.312Z,1509672811.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:31.327Z,1509672811.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:31.717Z,1509672811.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:31.732Z,1509672811.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:32.117Z,1509672812.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:32.132Z,1509672812.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:32.517Z,1509672812.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:32.532Z,1509672812.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:32.930Z,1509672812.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:32.965Z,1509672812.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:33.329Z,1509672813.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:33.344Z,1509672813.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:33.672Z,1509672813.672 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:33:33.771Z,1509672813.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:33.790Z,1509672813.790 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:33:33.791Z,1509672813.791 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:33:33.792Z,1509672813.792 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:33:33.809Z,1509672813.809 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:33:33.837Z,1509672813.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:34.131Z,1509672814.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:34.162Z,1509672814.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:34.530Z,1509672814.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:34.619Z,1509672814.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:34.914Z,1509672814.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:34.943Z,1509672814.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:35.313Z,1509672815.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:35.337Z,1509672815.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:35.710Z,1509672815.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:35.747Z,1509672815.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:36.126Z,1509672816.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:36.152Z,1509672816.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:36.523Z,1509672816.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:36.553Z,1509672816.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:36.923Z,1509672816.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:36.954Z,1509672816.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:37.312Z,1509672817.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:37.329Z,1509672817.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:37.707Z,1509672817.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:37.724Z,1509672817.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:38.110Z,1509672818.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:38.127Z,1509672818.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:38.511Z,1509672818.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:38.531Z,1509672818.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:38.922Z,1509672818.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:38.953Z,1509672818.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:39.326Z,1509672819.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:39.349Z,1509672819.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:39.726Z,1509672819.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:39.751Z,1509672819.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:40.112Z,1509672820.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:40.127Z,1509672820.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:40.515Z,1509672820.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:40.531Z,1509672820.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:40.908Z,1509672820.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:40.923Z,1509672820.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:41.324Z,1509672821.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:41.355Z,1509672821.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:41.712Z,1509672821.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:41.727Z,1509672821.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:42.122Z,1509672822.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:42.158Z,1509672822.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:42.526Z,1509672822.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:42.557Z,1509672822.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:42.926Z,1509672822.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:42.998Z,1509672822.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:43.307Z,1509672823.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:43.365Z,1509672823.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:43.708Z,1509672823.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:43.743Z,1509672823.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:44.110Z,1509672824.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:44.141Z,1509672824.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:44.504Z,1509672824.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:44.563Z,1509672824.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:44.930Z,1509672824.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:44.948Z,1509672824.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:45.342Z,1509672825.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:45.391Z,1509672825.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:45.718Z,1509672825.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:45.782Z,1509672825.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:46.111Z,1509672826.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:46.142Z,1509672826.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:46.511Z,1509672826.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:46.543Z,1509672826.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:46.911Z,1509672826.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:46.942Z,1509672826.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:47.379Z,1509672827.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:47.409Z,1509672827.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:47.708Z,1509672827.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:47.740Z,1509672827.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:48.122Z,1509672828.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:48.148Z,1509672828.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:48.521Z,1509672828.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:48.555Z,1509672828.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:48.922Z,1509672828.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:48.948Z,1509672828.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:49.304Z,1509672829.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:49.323Z,1509672829.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:49.723Z,1509672829.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:49.755Z,1509672829.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:50.114Z,1509672830.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:50.145Z,1509672830.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:50.508Z,1509672830.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:50.524Z,1509672830.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:50.922Z,1509672830.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:50.952Z,1509672830.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:51.330Z,1509672831.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:51.349Z,1509672831.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:51.718Z,1509672831.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:51.739Z,1509672831.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:52.114Z,1509672832.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:52.146Z,1509672832.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:52.512Z,1509672832.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:52.535Z,1509672832.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:52.911Z,1509672832.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:52.952Z,1509672832.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:53.312Z,1509672833.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:53.346Z,1509672833.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:53.716Z,1509672833.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:53.732Z,1509672833.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:54.122Z,1509672834.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:54.137Z,1509672834.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:54.530Z,1509672834.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:54.557Z,1509672834.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:54.930Z,1509672834.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:54.959Z,1509672834.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:55.317Z,1509672835.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:55.332Z,1509672835.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:55.719Z,1509672835.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:55.734Z,1509672835.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:56.118Z,1509672836.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:56.134Z,1509672836.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:56.517Z,1509672836.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:56.532Z,1509672836.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:56.930Z,1509672836.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:56.965Z,1509672836.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:33:57.330Z,1509672837.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:33:57.365Z,1509672837.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:00.526Z,1509672840.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:00.595Z,1509672840.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:00.728Z,1509672840.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:00.771Z,1509672840.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:01.126Z,1509672841.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:01.141Z,1509672841.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:01.528Z,1509672841.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:01.569Z,1509672841.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:01.937Z,1509672841.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:01.983Z,1509672841.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:02.341Z,1509672842.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:02.365Z,1509672842.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:02.737Z,1509672842.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:02.783Z,1509672842.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:03.123Z,1509672843.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:03.178Z,1509672843.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:03.524Z,1509672843.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:03.539Z,1509672843.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:03.919Z,1509672843.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:03.944Z,1509672843.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:04.324Z,1509672844.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:04.349Z,1509672844.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:04.723Z,1509672844.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:04.750Z,1509672844.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:05.141Z,1509672845.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:05.163Z,1509672845.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:05.541Z,1509672845.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:05.556Z,1509672845.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:05.942Z,1509672845.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:05.957Z,1509672845.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:06.316Z,1509672846.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:06.331Z,1509672846.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:06.720Z,1509672846.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:06.754Z,1509672846.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:07.126Z,1509672847.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:07.163Z,1509672847.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:07.513Z,1509672847.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:07.528Z,1509672847.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:07.941Z,1509672847.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:07.957Z,1509672847.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:08.342Z,1509672848.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:08.363Z,1509672848.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:08.729Z,1509672848.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:08.763Z,1509672848.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:09.129Z,1509672849.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:09.169Z,1509672849.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:09.520Z,1509672849.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:09.556Z,1509672849.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:09.923Z,1509672849.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:09.958Z,1509672849.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:10.321Z,1509672850.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:10.356Z,1509672850.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:10.721Z,1509672850.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:10.736Z,1509672850.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:11.172Z,1509672851.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:11.187Z,1509672851.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:11.537Z,1509672851.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:11.572Z,1509672851.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:11.937Z,1509672851.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:11.974Z,1509672851.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:12.324Z,1509672852.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:12.339Z,1509672852.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:12.725Z,1509672852.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:12.741Z,1509672852.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:13.169Z,1509672853.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:13.209Z,1509672853.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:13.527Z,1509672853.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:13.547Z,1509672853.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:13.934Z,1509672853.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:13.949Z,1509672853.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:14.330Z,1509672854.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:14.345Z,1509672854.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:14.742Z,1509672854.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:14.768Z,1509672854.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:15.124Z,1509672855.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:15.179Z,1509672855.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:15.528Z,1509672855.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:15.590Z,1509672855.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:15.932Z,1509672855.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:15.947Z,1509672855.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:16.333Z,1509672856.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:16.349Z,1509672856.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:16.730Z,1509672856.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:16.793Z,1509672856.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:17.136Z,1509672857.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:17.151Z,1509672857.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:17.538Z,1509672857.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:17.633Z,1509672857.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:17.937Z,1509672857.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:17.983Z,1509672857.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:18.330Z,1509672858.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:18.347Z,1509672858.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:18.728Z,1509672858.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:18.743Z,1509672858.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:19.132Z,1509672859.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:19.146Z,1509672859.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:19.530Z,1509672859.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:19.551Z,1509672859.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:19.940Z,1509672859.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:19.956Z,1509672859.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:20.341Z,1509672860.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:20.356Z,1509672860.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:20.737Z,1509672860.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:20.752Z,1509672860.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:21.145Z,1509672861.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:21.161Z,1509672861.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:21.517Z,1509672861.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:21.543Z,1509672861.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:21.929Z,1509672861.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:21.946Z,1509672861.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:22.333Z,1509672862.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:22.349Z,1509672862.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:22.716Z,1509672862.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:22.742Z,1509672862.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:23.142Z,1509672863.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:23.169Z,1509672863.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:23.542Z,1509672863.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:23.557Z,1509672863.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:23.942Z,1509672863.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:23.957Z,1509672863.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:24.317Z,1509672864.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:24.349Z,1509672864.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:24.720Z,1509672864.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:24.735Z,1509672864.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:25.161Z,1509672865.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:25.185Z,1509672865.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:25.520Z,1509672865.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:25.536Z,1509672865.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:25.938Z,1509672865.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:25.963Z,1509672865.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:26.334Z,1509672866.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:26.366Z,1509672866.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:26.734Z,1509672866.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:26.757Z,1509672866.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:27.176Z,1509672867.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:27.215Z,1509672867.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:27.520Z,1509672867.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:27.535Z,1509672867.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:27.920Z,1509672867.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:27.935Z,1509672867.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:28.328Z,1509672868.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:28.359Z,1509672868.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:28.719Z,1509672868.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:28.742Z,1509672868.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:29.138Z,1509672869.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:29.167Z,1509672869.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:29.556Z,1509672869.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:29.574Z,1509672869.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:29.946Z,1509672869.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:30.002Z,1509672870.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:30.330Z,1509672870.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:30.387Z,1509672870.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:30.728Z,1509672870.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:30.755Z,1509672870.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:31.132Z,1509672871.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:31.147Z,1509672871.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:31.529Z,1509672871.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:31.616Z,1509672871.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:31.941Z,1509672871.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:31.957Z,1509672871.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:32.344Z,1509672872.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:32.388Z,1509672872.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:32.740Z,1509672872.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:32.798Z,1509672872.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:33.131Z,1509672873.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:33.146Z,1509672873.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:33.529Z,1509672873.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:33.547Z,1509672873.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:33.931Z,1509672873.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:33.956Z,1509672873.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:34.326Z,1509672874.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:34.349Z,1509672874.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:34.727Z,1509672874.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:34.741Z,1509672874.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:35.164Z,1509672875.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:35.179Z,1509672875.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:35.537Z,1509672875.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:35.563Z,1509672875.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:35.937Z,1509672875.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:35.970Z,1509672875.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:36.324Z,1509672876.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:36.339Z,1509672876.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:36.724Z,1509672876.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:36.739Z,1509672876.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:37.134Z,1509672877.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:37.187Z,1509672877.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:37.524Z,1509672877.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:37.539Z,1509672877.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:37.938Z,1509672877.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:37.969Z,1509672877.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:38.338Z,1509672878.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:38.367Z,1509672878.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:38.738Z,1509672878.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:38.768Z,1509672878.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:39.134Z,1509672879.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:39.182Z,1509672879.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:39.528Z,1509672879.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:39.551Z,1509672879.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:39.927Z,1509672879.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:39.942Z,1509672879.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:40.328Z,1509672880.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:40.347Z,1509672880.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:40.727Z,1509672880.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:40.742Z,1509672880.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:41.175Z,1509672881.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:41.214Z,1509672881.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:41.541Z,1509672881.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:41.556Z,1509672881.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:41.942Z,1509672881.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:41.962Z,1509672881.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:42.320Z,1509672882.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:42.346Z,1509672882.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:42.723Z,1509672882.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:42.748Z,1509672882.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:43.124Z,1509672883.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:43.150Z,1509672883.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:43.539Z,1509672883.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:43.555Z,1509672883.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:43.942Z,1509672883.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:44.010Z,1509672884.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:44.346Z,1509672884.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:44.360Z,1509672884.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:44.741Z,1509672884.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:44.803Z,1509672884.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:45.120Z,1509672885.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:45.154Z,1509672885.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:45.521Z,1509672885.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:45.555Z,1509672885.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:45.935Z,1509672885.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:45.991Z,1509672885.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:46.324Z,1509672886.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:46.339Z,1509672886.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:46.724Z,1509672886.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:46.779Z,1509672886.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:47.137Z,1509672887.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:47.191Z,1509672887.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:47.537Z,1509672887.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:47.571Z,1509672887.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:47.945Z,1509672887.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:47.967Z,1509672887.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:48.323Z,1509672888.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:48.349Z,1509672888.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:48.720Z,1509672888.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:48.746Z,1509672888.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:49.148Z,1509672889.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:49.162Z,1509672889.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:49.521Z,1509672889.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:49.555Z,1509672889.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:49.941Z,1509672889.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:49.957Z,1509672889.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:50.343Z,1509672890.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:50.362Z,1509672890.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:50.741Z,1509672890.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:50.757Z,1509672890.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:51.153Z,1509672891.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:51.171Z,1509672891.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:51.524Z,1509672891.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:51.552Z,1509672891.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:51.917Z,1509672891.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:51.948Z,1509672891.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:52.325Z,1509672892.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:52.351Z,1509672892.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:52.717Z,1509672892.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:52.752Z,1509672892.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:53.143Z,1509672893.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:53.171Z,1509672893.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:53.542Z,1509672893.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:53.557Z,1509672893.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:53.943Z,1509672893.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:53.958Z,1509672893.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:54.323Z,1509672894.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:54.355Z,1509672894.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:54.720Z,1509672894.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:54.751Z,1509672894.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:55.180Z,1509672895.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:55.234Z,1509672895.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:55.520Z,1509672895.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:55.535Z,1509672895.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:55.933Z,1509672895.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:55.961Z,1509672895.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:56.333Z,1509672896.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:56.368Z,1509672896.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:56.734Z,1509672896.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:56.760Z,1509672896.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:57.122Z,1509672897.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:57.137Z,1509672897.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:34:57.537Z,1509672897.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:34:57.561Z,1509672897.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:00.748Z,1509672900.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:00.827Z,1509672900.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:00.976Z,1509672900.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:00.991Z,1509672900.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:01.373Z,1509672901.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:01.389Z,1509672901.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:01.786Z,1509672901.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:01.835Z,1509672901.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:02.178Z,1509672902.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:02.193Z,1509672902.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:02.573Z,1509672902.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:02.612Z,1509672902.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:02.972Z,1509672902.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:03.019Z,1509672903.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:03.366Z,1509672903.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:03.398Z,1509672903.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:03.773Z,1509672903.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:03.789Z,1509672903.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:04.184Z,1509672904.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:04.200Z,1509672904.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:04.584Z,1509672904.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:04.599Z,1509672904.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:04.982Z,1509672904.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:04.996Z,1509672904.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:05.363Z,1509672905.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:05.389Z,1509672905.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:05.775Z,1509672905.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:05.791Z,1509672905.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:06.161Z,1509672906.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:06.187Z,1509672906.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:06.574Z,1509672906.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:06.589Z,1509672906.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:06.985Z,1509672906.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:06.000Z,1509672907.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:07.389Z,1509672907.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:07.411Z,1509672907.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:07.785Z,1509672907.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:07.800Z,1509672907.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:08.175Z,1509672908.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:08.195Z,1509672908.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:08.561Z,1509672908.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:08.586Z,1509672908.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:08.974Z,1509672908.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:08.989Z,1509672908.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:09.363Z,1509672909.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:09.391Z,1509672909.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:09.773Z,1509672909.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:09.792Z,1509672909.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:10.185Z,1509672910.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:10.211Z,1509672910.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:10.588Z,1509672910.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:10.603Z,1509672910.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:10.989Z,1509672910.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:11.003Z,1509672911.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:11.389Z,1509672911.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:11.430Z,1509672911.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:11.773Z,1509672911.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:11.794Z,1509672911.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:12.174Z,1509672912.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:12.189Z,1509672912.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:12.574Z,1509672912.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:12.589Z,1509672912.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:12.985Z,1509672912.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:12.993Z,1509672912.993 [BPC1](ERROR): Failed to parse message.
2017-11-03T01:35:12.993Z,1509672912.993 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:35:12.993Z,1509672912.993 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:35:12.993Z,1509672912.993 [BPC1](ERROR): Data Fault
2017-11-03T01:35:13.002Z,1509672913.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:13.077Z,1509672913.077 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:35:13.387Z,1509672913.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:13.403Z,1509672913.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:13.786Z,1509672913.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:13.801Z,1509672913.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:14.167Z,1509672914.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:14.193Z,1509672914.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:14.296Z,1509672914.296 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:35:14.296Z,1509672914.296 [BPC1] No Fault, FailCount= 1
2017-11-03T01:35:14.565Z,1509672914.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:14.651Z,1509672914.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:14.963Z,1509672914.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:14.989Z,1509672914.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:15.366Z,1509672915.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:15.392Z,1509672915.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:15.786Z,1509672915.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:15.842Z,1509672915.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:16.186Z,1509672916.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:16.201Z,1509672916.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:16.589Z,1509672916.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:16.611Z,1509672916.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:16.991Z,1509672916.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:17.006Z,1509672917.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:17.372Z,1509672917.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:17.387Z,1509672917.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:17.769Z,1509672917.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:17.784Z,1509672917.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:18.169Z,1509672918.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:18.190Z,1509672918.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:18.564Z,1509672918.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:18.580Z,1509672918.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:18.982Z,1509672918.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:19.012Z,1509672919.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:19.386Z,1509672919.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:19.409Z,1509672919.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:19.774Z,1509672919.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:19.790Z,1509672919.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:20.172Z,1509672920.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:20.187Z,1509672920.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:20.568Z,1509672920.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:20.583Z,1509672920.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:20.966Z,1509672920.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:20.985Z,1509672920.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:21.373Z,1509672921.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:21.388Z,1509672921.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:21.772Z,1509672921.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:21.788Z,1509672921.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:22.181Z,1509672922.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:22.211Z,1509672922.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:22.581Z,1509672922.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:22.613Z,1509672922.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:22.985Z,1509672922.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:23.014Z,1509672923.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:23.362Z,1509672923.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:23.385Z,1509672923.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:23.773Z,1509672923.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:23.788Z,1509672923.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:24.176Z,1509672924.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:24.191Z,1509672924.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:24.575Z,1509672924.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:24.595Z,1509672924.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:24.980Z,1509672924.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:25.003Z,1509672925.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:25.416Z,1509672925.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:25.438Z,1509672925.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:25.782Z,1509672925.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:25.797Z,1509672925.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:26.173Z,1509672926.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:26.238Z,1509672926.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:26.576Z,1509672926.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:26.591Z,1509672926.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:26.975Z,1509672926.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:26.995Z,1509672926.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:27.378Z,1509672927.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:27.393Z,1509672927.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:27.783Z,1509672927.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:27.798Z,1509672927.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:28.185Z,1509672928.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:28.246Z,1509672928.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:28.585Z,1509672928.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:28.600Z,1509672928.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:28.985Z,1509672928.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:29.035Z,1509672929.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:29.373Z,1509672929.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:29.388Z,1509672929.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:29.653Z,1509672929.653 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:35:29.653Z,1509672929.653 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T01:35:29.654Z,1509672929.654 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:35:29.766Z,1509672929.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:29.820Z,1509672929.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:35:29.821Z,1509672929.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:29.924Z,1509672929.924 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:35:30.057Z,1509672930.057 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:35:30.182Z,1509672930.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:30.208Z,1509672930.208 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:35:30.235Z,1509672930.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:35:30.237Z,1509672930.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:30.573Z,1509672930.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:30.588Z,1509672930.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:35:30.589Z,1509672930.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:30.984Z,1509672930.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:30.000Z,1509672931.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:35:31.001Z,1509672931.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:31.385Z,1509672931.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:31.400Z,1509672931.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:35:31.401Z,1509672931.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:31.492Z,1509672931.492 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:35:31.492Z,1509672931.492 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T01:35:31.786Z,1509672931.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:31.800Z,1509672931.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:35:31.801Z,1509672931.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:31.825Z,1509672931.825 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:35:31.825Z,1509672931.825 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:35:31.825Z,1509672931.825 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:35:31.825Z,1509672931.825 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:35:32.167Z,1509672932.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:32.194Z,1509672932.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:35:32.195Z,1509672932.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:32.568Z,1509672932.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:32.594Z,1509672932.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:35:32.595Z,1509672932.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:32.960Z,1509672932.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:32.990Z,1509672932.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:35:32.991Z,1509672932.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:33.366Z,1509672933.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:33.393Z,1509672933.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:35:33.393Z,1509672933.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:33.767Z,1509672933.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:33.794Z,1509672933.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:35:33.795Z,1509672933.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:34.186Z,1509672934.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:34.206Z,1509672934.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:35:34.207Z,1509672934.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:34.586Z,1509672934.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:34.601Z,1509672934.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:35:34.602Z,1509672934.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:34.990Z,1509672934.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:35.004Z,1509672935.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:35:35.005Z,1509672935.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:35.361Z,1509672935.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:35.395Z,1509672935.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:35:35.396Z,1509672935.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:35.765Z,1509672935.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:35.798Z,1509672935.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:35:35.799Z,1509672935.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:35.960Z,1509672935.960 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:35:36.021Z,1509672936.021 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:35:36.022Z,1509672936.022 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:35:36.024Z,1509672936.024 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:35:36.024Z,1509672936.024 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:35:36.165Z,1509672936.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:36.181Z,1509672936.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:35:36.182Z,1509672936.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:36.574Z,1509672936.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:36.599Z,1509672936.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:36.982Z,1509672936.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:37.004Z,1509672937.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:37.378Z,1509672937.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:37.410Z,1509672937.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:37.792Z,1509672937.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:37.815Z,1509672937.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:38.165Z,1509672938.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:38.181Z,1509672938.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:38.565Z,1509672938.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:38.580Z,1509672938.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:38.964Z,1509672938.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:38.981Z,1509672938.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:39.370Z,1509672939.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:39.402Z,1509672939.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:39.764Z,1509672939.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:39.780Z,1509672939.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:40.193Z,1509672940.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:40.308Z,1509672940.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:40.592Z,1509672940.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:40.607Z,1509672940.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:40.978Z,1509672940.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:41.031Z,1509672941.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:41.364Z,1509672941.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:41.380Z,1509672941.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:41.768Z,1509672941.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:41.783Z,1509672941.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:42.176Z,1509672942.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:42.207Z,1509672942.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:42.568Z,1509672942.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:42.626Z,1509672942.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:42.982Z,1509672942.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:43.012Z,1509672943.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:43.381Z,1509672943.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:43.412Z,1509672943.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:43.778Z,1509672943.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:43.834Z,1509672943.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:44.175Z,1509672944.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:44.214Z,1509672944.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:44.569Z,1509672944.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:44.622Z,1509672944.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:44.964Z,1509672944.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:45.022Z,1509672945.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:45.369Z,1509672945.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:45.391Z,1509672945.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:45.764Z,1509672945.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:45.779Z,1509672945.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:46.182Z,1509672946.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:46.212Z,1509672946.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:46.582Z,1509672946.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:46.612Z,1509672946.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:46.982Z,1509672946.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:47.013Z,1509672947.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:47.364Z,1509672947.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:47.379Z,1509672947.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:47.768Z,1509672947.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:47.791Z,1509672947.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:48.190Z,1509672948.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:48.220Z,1509672948.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:48.569Z,1509672948.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:48.583Z,1509672948.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:48.982Z,1509672948.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:49.012Z,1509672949.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:49.385Z,1509672949.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:49.414Z,1509672949.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:49.778Z,1509672949.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:49.809Z,1509672949.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:50.168Z,1509672950.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:50.191Z,1509672950.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:50.579Z,1509672950.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:50.610Z,1509672950.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:50.970Z,1509672950.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:50.985Z,1509672950.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:51.369Z,1509672951.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:51.384Z,1509672951.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:51.769Z,1509672951.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:51.783Z,1509672951.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:52.174Z,1509672952.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:52.189Z,1509672952.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:52.651Z,1509672952.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:52.724Z,1509672952.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:52.976Z,1509672952.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:53.027Z,1509672953.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:53.390Z,1509672953.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:53.418Z,1509672953.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:53.763Z,1509672953.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:53.814Z,1509672953.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:54.199Z,1509672954.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:54.256Z,1509672954.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:54.574Z,1509672954.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:54.654Z,1509672954.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:54.975Z,1509672954.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:55.021Z,1509672955.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:55.384Z,1509672955.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:55.451Z,1509672955.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:55.780Z,1509672955.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:55.867Z,1509672955.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:56.181Z,1509672956.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:56.207Z,1509672956.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:56.572Z,1509672956.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:56.587Z,1509672956.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:56.980Z,1509672956.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:57.035Z,1509672957.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:57.407Z,1509672957.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:57.498Z,1509672957.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:35:57.778Z,1509672957.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:35:57.822Z,1509672957.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:04.682Z,1509672964.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:04.758Z,1509672964.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:04.940Z,1509672964.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:05.014Z,1509672965.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:05.336Z,1509672965.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:05.410Z,1509672965.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:05.733Z,1509672965.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:05.771Z,1509672965.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:06.131Z,1509672966.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:06.173Z,1509672966.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:06.538Z,1509672966.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:06.629Z,1509672966.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:06.928Z,1509672966.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:06.988Z,1509672966.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:07.334Z,1509672967.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:07.349Z,1509672967.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:07.735Z,1509672967.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:07.755Z,1509672967.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:08.111Z,1509672968.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:08.139Z,1509672968.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:08.523Z,1509672968.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:08.538Z,1509672968.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:08.538Z,1509672968.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2017-11-03T01:36:08.538Z,1509672968.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:36:08.540Z,1509672968.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:08.540Z,1509672968.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2017-11-03T01:36:08.540Z,1509672968.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:36:08.542Z,1509672968.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:08.542Z,1509672968.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2017-11-03T01:36:08.542Z,1509672968.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:36:08.669Z,1509672968.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:36:08.669Z,1509672968.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:36:08.669Z,1509672968.669 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:36:08.911Z,1509672968.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:09.020Z,1509672969.020 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:36:09.020Z,1509672969.020 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2017-11-03T01:36:09.021Z,1509672969.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:36:09.021Z,1509672969.021 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2017-11-03T01:36:09.021Z,1509672969.021 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:36:09.021Z,1509672969.021 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2017-11-03T01:36:09.320Z,1509672969.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:09.354Z,1509672969.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:36:09.354Z,1509672969.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:36:09.355Z,1509672969.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:36:09.355Z,1509672969.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:36:09.355Z,1509672969.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:36:09.356Z,1509672969.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:36:09.356Z,1509672969.356 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:36:09.357Z,1509672969.357 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:36:09.357Z,1509672969.357 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:36:09.713Z,1509672969.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:09.728Z,1509672969.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:10.162Z,1509672970.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:10.177Z,1509672970.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:10.527Z,1509672970.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:10.551Z,1509672970.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:10.927Z,1509672970.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:10.951Z,1509672970.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:11.318Z,1509672971.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:11.349Z,1509672971.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:11.712Z,1509672971.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:11.728Z,1509672971.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:12.155Z,1509672972.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:12.172Z,1509672972.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:12.512Z,1509672972.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:12.530Z,1509672972.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:12.926Z,1509672972.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:12.957Z,1509672972.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:13.327Z,1509672973.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:13.361Z,1509672973.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:13.726Z,1509672973.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:13.764Z,1509672973.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:14.145Z,1509672974.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:14.174Z,1509672974.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:14.520Z,1509672974.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:14.561Z,1509672974.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:14.912Z,1509672974.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:14.928Z,1509672974.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:15.312Z,1509672975.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:15.328Z,1509672975.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:15.712Z,1509672975.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:15.735Z,1509672975.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:16.171Z,1509672976.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:16.209Z,1509672976.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:16.526Z,1509672976.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:16.576Z,1509672976.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:16.934Z,1509672976.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:16.963Z,1509672976.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:17.319Z,1509672977.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:17.375Z,1509672977.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:17.712Z,1509672977.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:17.727Z,1509672977.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:18.120Z,1509672978.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:18.167Z,1509672978.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:18.521Z,1509672978.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:18.536Z,1509672978.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:18.952Z,1509672978.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:19.006Z,1509672979.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:19.330Z,1509672979.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:19.379Z,1509672979.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:19.730Z,1509672979.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:19.761Z,1509672979.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:20.120Z,1509672980.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:20.135Z,1509672980.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:20.515Z,1509672980.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:20.531Z,1509672980.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:20.920Z,1509672980.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:20.935Z,1509672980.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:21.313Z,1509672981.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:21.328Z,1509672981.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:21.719Z,1509672981.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:21.739Z,1509672981.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:22.125Z,1509672982.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:22.161Z,1509672982.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:22.526Z,1509672982.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:22.557Z,1509672982.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:22.930Z,1509672982.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:22.945Z,1509672982.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:23.325Z,1509672983.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:23.340Z,1509672983.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:23.724Z,1509672983.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:23.739Z,1509672983.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:24.136Z,1509672984.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:24.151Z,1509672984.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:24.508Z,1509672984.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:24.535Z,1509672984.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:24.933Z,1509672984.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:25.022Z,1509672985.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:25.334Z,1509672985.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:25.349Z,1509672985.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:25.736Z,1509672985.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:25.751Z,1509672985.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:26.128Z,1509672986.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:26.144Z,1509672986.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:26.524Z,1509672986.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:26.539Z,1509672986.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:26.925Z,1509672986.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:26.941Z,1509672986.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:27.326Z,1509672987.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:27.341Z,1509672987.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:27.729Z,1509672987.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:27.744Z,1509672987.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:28.139Z,1509672988.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:28.178Z,1509672988.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:28.535Z,1509672988.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:28.550Z,1509672988.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:28.930Z,1509672988.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:28.951Z,1509672988.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:29.326Z,1509672989.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:29.341Z,1509672989.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:29.724Z,1509672989.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:29.739Z,1509672989.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:30.145Z,1509672990.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:30.227Z,1509672990.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:30.515Z,1509672990.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:30.543Z,1509672990.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:30.937Z,1509672990.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:30.952Z,1509672990.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:31.335Z,1509672991.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:31.402Z,1509672991.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:31.736Z,1509672991.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:31.758Z,1509672991.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:32.115Z,1509672992.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:32.180Z,1509672992.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:32.511Z,1509672992.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:32.544Z,1509672992.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:32.912Z,1509672992.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:32.979Z,1509672992.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:33.316Z,1509672993.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:33.381Z,1509672993.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:33.712Z,1509672993.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:33.742Z,1509672993.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:34.135Z,1509672994.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:34.151Z,1509672994.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:34.530Z,1509672994.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:34.545Z,1509672994.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:34.921Z,1509672994.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:34.942Z,1509672994.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:35.321Z,1509672995.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:35.336Z,1509672995.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:35.720Z,1509672995.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:35.735Z,1509672995.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:36.120Z,1509672996.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:36.135Z,1509672996.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:36.520Z,1509672996.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:36.535Z,1509672996.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:36.922Z,1509672996.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:36.937Z,1509672996.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:37.334Z,1509672997.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:37.363Z,1509672997.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:37.726Z,1509672997.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:37.763Z,1509672997.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:38.137Z,1509672998.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:38.168Z,1509672998.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:38.519Z,1509672998.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:38.538Z,1509672998.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:38.912Z,1509672998.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:38.939Z,1509672998.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:39.308Z,1509672999.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:39.332Z,1509672999.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:39.706Z,1509672999.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:39.723Z,1509672999.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:40.127Z,1509673000.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:40.163Z,1509673000.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:40.548Z,1509673000.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:40.580Z,1509673000.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:40.918Z,1509673000.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:40.962Z,1509673000.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:41.324Z,1509673001.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:41.355Z,1509673001.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:41.719Z,1509673001.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:41.735Z,1509673001.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:42.155Z,1509673002.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:42.173Z,1509673002.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:42.517Z,1509673002.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:42.533Z,1509673002.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:42.926Z,1509673002.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:42.960Z,1509673002.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:43.330Z,1509673003.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:43.359Z,1509673003.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:43.730Z,1509673003.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:43.761Z,1509673003.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:44.174Z,1509673004.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:44.250Z,1509673004.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:44.517Z,1509673004.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:44.533Z,1509673004.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:44.918Z,1509673004.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:44.933Z,1509673004.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:45.318Z,1509673005.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:45.390Z,1509673005.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:45.721Z,1509673005.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:45.735Z,1509673005.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:46.127Z,1509673006.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:46.146Z,1509673006.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:46.527Z,1509673006.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:46.583Z,1509673006.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:46.925Z,1509673006.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:46.946Z,1509673006.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:47.321Z,1509673007.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:47.374Z,1509673007.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:47.720Z,1509673007.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:47.772Z,1509673007.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:48.121Z,1509673008.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:48.137Z,1509673008.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:48.521Z,1509673008.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:48.536Z,1509673008.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:48.924Z,1509673008.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:48.944Z,1509673008.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:49.329Z,1509673009.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:49.351Z,1509673009.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:49.730Z,1509673009.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:49.751Z,1509673009.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:50.124Z,1509673010.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:50.139Z,1509673010.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:50.524Z,1509673010.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:50.538Z,1509673010.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:50.911Z,1509673010.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:50.948Z,1509673010.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:51.309Z,1509673011.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:51.339Z,1509673011.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:51.724Z,1509673011.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:51.739Z,1509673011.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:52.162Z,1509673012.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:52.183Z,1509673012.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:52.527Z,1509673012.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:52.551Z,1509673012.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:52.930Z,1509673012.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:52.960Z,1509673012.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:53.312Z,1509673013.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:53.351Z,1509673013.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:53.712Z,1509673013.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:53.727Z,1509673013.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:54.146Z,1509673014.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:54.181Z,1509673014.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:54.521Z,1509673014.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:54.536Z,1509673014.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:54.934Z,1509673014.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:54.962Z,1509673014.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:55.326Z,1509673015.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:55.341Z,1509673015.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:55.734Z,1509673015.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:55.763Z,1509673015.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:56.135Z,1509673016.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:56.175Z,1509673016.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:56.518Z,1509673016.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:56.538Z,1509673016.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:56.921Z,1509673016.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:56.937Z,1509673016.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:57.321Z,1509673017.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:57.336Z,1509673017.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:57.720Z,1509673017.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:57.735Z,1509673017.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:36:58.178Z,1509673018.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:36:58.218Z,1509673018.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:01.330Z,1509673021.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:01.399Z,1509673021.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:01.552Z,1509673021.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:01.591Z,1509673021.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:01.943Z,1509673021.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:01.958Z,1509673021.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:02.339Z,1509673022.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:02.391Z,1509673022.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:02.748Z,1509673022.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:02.763Z,1509673022.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:03.149Z,1509673023.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:03.195Z,1509673023.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:03.548Z,1509673023.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:03.595Z,1509673023.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:03.948Z,1509673023.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:03.963Z,1509673023.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:04.343Z,1509673024.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:04.358Z,1509673024.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:04.746Z,1509673024.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:04.767Z,1509673024.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:05.143Z,1509673025.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:05.158Z,1509673025.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:05.542Z,1509673025.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:05.557Z,1509673025.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:05.949Z,1509673025.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:05.964Z,1509673025.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:06.361Z,1509673026.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:06.390Z,1509673026.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:06.750Z,1509673026.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:06.765Z,1509673026.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:07.142Z,1509673027.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:07.163Z,1509673027.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:07.544Z,1509673027.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:07.558Z,1509673027.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:07.941Z,1509673027.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:07.956Z,1509673027.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:08.340Z,1509673028.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:08.356Z,1509673028.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:08.743Z,1509673028.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:08.758Z,1509673028.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:09.150Z,1509673029.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:09.199Z,1509673029.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:09.549Z,1509673029.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:09.565Z,1509673029.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:09.948Z,1509673029.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:09.963Z,1509673029.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:10.340Z,1509673030.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:10.363Z,1509673030.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:10.735Z,1509673030.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:10.755Z,1509673030.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:11.143Z,1509673031.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:11.159Z,1509673031.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:11.542Z,1509673031.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:11.558Z,1509673031.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:11.948Z,1509673031.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:11.971Z,1509673031.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:12.362Z,1509673032.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:12.394Z,1509673032.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:12.753Z,1509673032.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:12.769Z,1509673032.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:13.143Z,1509673033.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:13.163Z,1509673033.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:13.540Z,1509673033.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:13.562Z,1509673033.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:13.944Z,1509673033.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:13.959Z,1509673033.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:14.385Z,1509673034.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:14.411Z,1509673034.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:14.740Z,1509673034.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:14.755Z,1509673034.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:15.152Z,1509673035.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:15.168Z,1509673035.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:15.552Z,1509673035.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:15.614Z,1509673035.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:15.952Z,1509673035.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:15.975Z,1509673035.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:16.342Z,1509673036.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:16.396Z,1509673036.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:16.737Z,1509673036.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:16.756Z,1509673036.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:17.141Z,1509673037.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:17.195Z,1509673037.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:17.541Z,1509673037.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:17.595Z,1509673037.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:17.952Z,1509673037.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:17.967Z,1509673037.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:18.351Z,1509673038.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:18.370Z,1509673038.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:18.753Z,1509673038.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:18.768Z,1509673038.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:19.139Z,1509673039.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:19.155Z,1509673039.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:19.541Z,1509673039.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:19.576Z,1509673039.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:19.941Z,1509673039.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:19.956Z,1509673039.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:20.343Z,1509673040.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:20.366Z,1509673040.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:20.740Z,1509673040.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:20.755Z,1509673040.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:21.153Z,1509673041.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:21.169Z,1509673041.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:21.552Z,1509673041.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:21.567Z,1509673041.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:21.952Z,1509673041.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:21.967Z,1509673041.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:22.337Z,1509673042.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:22.358Z,1509673042.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:22.737Z,1509673042.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:22.799Z,1509673042.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:23.143Z,1509673043.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:23.158Z,1509673043.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:23.544Z,1509673043.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:23.559Z,1509673043.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:23.953Z,1509673043.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:23.968Z,1509673043.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:24.353Z,1509673044.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:24.367Z,1509673044.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:24.753Z,1509673044.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:24.768Z,1509673044.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:25.142Z,1509673045.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:25.163Z,1509673045.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:25.532Z,1509673045.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:25.557Z,1509673045.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:25.943Z,1509673045.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:25.958Z,1509673045.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:26.332Z,1509673046.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:26.357Z,1509673046.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:26.743Z,1509673046.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:26.758Z,1509673046.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:27.157Z,1509673047.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:27.172Z,1509673047.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:27.556Z,1509673047.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:27.579Z,1509673047.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:27.954Z,1509673047.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:27.969Z,1509673047.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:28.367Z,1509673048.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:28.398Z,1509673048.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:28.729Z,1509673048.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:28.760Z,1509673048.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:29.136Z,1509673049.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:29.166Z,1509673049.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:29.535Z,1509673049.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:29.611Z,1509673049.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:29.954Z,1509673049.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:29.969Z,1509673049.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:30.355Z,1509673050.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:30.370Z,1509673050.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:30.755Z,1509673050.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:30.811Z,1509673050.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:31.135Z,1509673051.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:31.166Z,1509673051.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:31.532Z,1509673051.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:31.587Z,1509673051.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:31.928Z,1509673051.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:31.990Z,1509673051.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:32.336Z,1509673052.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:32.367Z,1509673052.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:32.731Z,1509673052.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:32.766Z,1509673052.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:33.141Z,1509673053.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:33.167Z,1509673053.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:33.558Z,1509673053.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:33.574Z,1509673053.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:33.945Z,1509673053.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:33.970Z,1509673053.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:34.327Z,1509673054.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:34.346Z,1509673054.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:34.743Z,1509673054.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:34.775Z,1509673054.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:35.133Z,1509673055.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:35.166Z,1509673055.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:35.535Z,1509673055.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:35.565Z,1509673055.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:35.941Z,1509673055.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:35.975Z,1509673055.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:36.365Z,1509673056.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:36.380Z,1509673056.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:36.754Z,1509673056.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:36.769Z,1509673056.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:37.135Z,1509673057.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:37.165Z,1509673057.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:37.532Z,1509673057.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:37.565Z,1509673057.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:37.935Z,1509673057.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:37.966Z,1509673057.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:38.344Z,1509673058.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:38.375Z,1509673058.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:38.732Z,1509673058.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:38.767Z,1509673058.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:39.158Z,1509673059.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:39.172Z,1509673059.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:39.558Z,1509673059.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:39.573Z,1509673059.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:39.944Z,1509673059.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:39.974Z,1509673059.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:40.343Z,1509673060.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:40.371Z,1509673060.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:40.729Z,1509673060.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:40.756Z,1509673060.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:41.136Z,1509673061.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:41.171Z,1509673061.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:41.535Z,1509673061.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:41.570Z,1509673061.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:41.946Z,1509673061.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:41.972Z,1509673061.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:42.370Z,1509673062.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:42.397Z,1509673062.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:42.746Z,1509673062.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:42.794Z,1509673062.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:43.132Z,1509673063.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:43.148Z,1509673063.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:43.532Z,1509673063.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:43.599Z,1509673063.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:43.932Z,1509673063.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:43.951Z,1509673063.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:44.333Z,1509673064.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:44.348Z,1509673064.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:44.733Z,1509673064.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:44.782Z,1509673064.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:45.145Z,1509673065.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:45.181Z,1509673065.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:45.554Z,1509673065.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:45.607Z,1509673065.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:45.953Z,1509673065.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:46.010Z,1509673066.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:46.335Z,1509673066.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:46.350Z,1509673066.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:46.740Z,1509673066.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:46.780Z,1509673066.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:47.140Z,1509673067.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:47.157Z,1509673067.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:47.535Z,1509673067.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:47.550Z,1509673067.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:47.950Z,1509673067.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:47.985Z,1509673067.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:48.352Z,1509673068.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:48.374Z,1509673068.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:48.753Z,1509673068.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:48.775Z,1509673068.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:49.140Z,1509673069.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:49.155Z,1509673069.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:49.540Z,1509673069.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:49.554Z,1509673069.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:49.943Z,1509673069.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:49.958Z,1509673069.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:50.337Z,1509673070.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:50.358Z,1509673070.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:50.740Z,1509673070.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:50.755Z,1509673070.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:51.149Z,1509673071.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:51.164Z,1509673071.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:51.552Z,1509673071.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:51.567Z,1509673071.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:51.952Z,1509673071.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:51.974Z,1509673071.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:52.331Z,1509673072.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:52.363Z,1509673072.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:52.732Z,1509673072.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:52.758Z,1509673072.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:53.133Z,1509673073.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:53.159Z,1509673073.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:53.535Z,1509673073.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:53.561Z,1509673073.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:53.953Z,1509673073.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:53.975Z,1509673073.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:54.353Z,1509673074.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:54.375Z,1509673074.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:54.754Z,1509673074.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:54.774Z,1509673074.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:55.132Z,1509673075.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:55.158Z,1509673075.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:55.532Z,1509673075.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:55.558Z,1509673075.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:55.935Z,1509673075.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:55.961Z,1509673075.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:56.369Z,1509673076.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:56.458Z,1509673076.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:56.732Z,1509673076.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:56.762Z,1509673076.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:57.153Z,1509673077.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:57.168Z,1509673077.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:57.171Z,1509673077.171 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T01:37:57.172Z,1509673077.172 [Default:CheckIn:C.Wait] Stopped
2017-11-03T01:37:57.172Z,1509673077.172 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T01:37:57.172Z,1509673077.172 [Default:CheckIn:D] Running Loop=1
2017-11-03T01:37:57.545Z,1509673077.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:57.561Z,1509673077.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:57.564Z,1509673077.564 [Default:CheckIn:D] Stopped
2017-11-03T01:37:57.564Z,1509673077.564 [Default:CheckIn:E] Running Loop=1
2017-11-03T01:37:57.943Z,1509673077.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:57.967Z,1509673077.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.833285 min 
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn:E] Stopped
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn] Stopped
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn](INFO): Running loop #9
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn] Running Loop=9
2017-11-03T01:37:57.975Z,1509673077.975 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T01:37:57.976Z,1509673077.976 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T01:37:58.334Z,1509673078.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:37:58.394Z,1509673078.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:01.530Z,1509673081.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:01.553Z,1509673081.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:01.680Z,1509673081.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:01.711Z,1509673081.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:02.114Z,1509673082.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:02.149Z,1509673082.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:02.497Z,1509673082.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:02.547Z,1509673082.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:02.905Z,1509673082.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:02.921Z,1509673082.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:03.276Z,1509673083.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:03.327Z,1509673083.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:03.681Z,1509673083.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:03.730Z,1509673083.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:04.113Z,1509673084.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:04.165Z,1509673084.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:04.483Z,1509673084.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:04.502Z,1509673084.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:04.897Z,1509673084.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:04.922Z,1509673084.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:05.301Z,1509673085.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:05.330Z,1509673085.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:05.702Z,1509673085.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:05.731Z,1509673085.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:06.126Z,1509673086.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:06.175Z,1509673086.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:06.487Z,1509673086.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:06.502Z,1509673086.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:06.887Z,1509673086.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:06.907Z,1509673086.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:07.284Z,1509673087.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:07.306Z,1509673087.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:07.683Z,1509673087.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:07.703Z,1509673087.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:08.106Z,1509673088.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:08.180Z,1509673088.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:08.497Z,1509673088.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:08.532Z,1509673088.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:08.901Z,1509673088.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:08.932Z,1509673088.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:09.283Z,1509673089.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:09.298Z,1509673089.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:09.684Z,1509673089.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:09.707Z,1509673089.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:10.084Z,1509673090.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:10.099Z,1509673090.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:10.495Z,1509673090.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:10.510Z,1509673090.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:10.898Z,1509673090.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:10.933Z,1509673090.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:11.293Z,1509673091.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:11.309Z,1509673091.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:11.694Z,1509673091.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:11.709Z,1509673091.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:12.087Z,1509673092.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:12.102Z,1509673092.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:12.488Z,1509673092.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:12.503Z,1509673092.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:12.887Z,1509673092.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:12.902Z,1509673092.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:13.288Z,1509673093.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:13.303Z,1509673093.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:13.688Z,1509673093.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:13.703Z,1509673093.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:14.101Z,1509673094.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:14.131Z,1509673094.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:14.501Z,1509673094.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:14.559Z,1509673094.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:14.897Z,1509673094.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:14.912Z,1509673094.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:15.292Z,1509673095.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:15.307Z,1509673095.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:15.691Z,1509673095.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:15.762Z,1509673095.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:16.118Z,1509673096.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:16.152Z,1509673096.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:16.476Z,1509673096.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:16.502Z,1509673096.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:16.903Z,1509673096.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:16.951Z,1509673096.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:17.304Z,1509673097.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:17.323Z,1509673097.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:17.695Z,1509673097.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:17.737Z,1509673097.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:18.117Z,1509673098.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:18.198Z,1509673098.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:18.490Z,1509673098.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:18.505Z,1509673098.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:18.902Z,1509673098.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:18.923Z,1509673098.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:19.301Z,1509673099.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:19.316Z,1509673099.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:19.698Z,1509673099.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:19.719Z,1509673099.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:20.124Z,1509673100.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:20.156Z,1509673100.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:20.491Z,1509673100.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:20.506Z,1509673100.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:20.901Z,1509673100.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:20.916Z,1509673100.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:21.298Z,1509673101.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:21.313Z,1509673101.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:21.690Z,1509673101.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:21.711Z,1509673101.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:22.092Z,1509673102.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:22.168Z,1509673102.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:22.491Z,1509673102.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:22.506Z,1509673102.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:22.898Z,1509673102.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:22.913Z,1509673102.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:23.302Z,1509673103.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:23.317Z,1509673103.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:23.698Z,1509673103.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:23.713Z,1509673103.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:24.077Z,1509673104.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:24.103Z,1509673104.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:24.499Z,1509673104.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:24.514Z,1509673104.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:24.891Z,1509673104.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:24.907Z,1509673104.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:25.291Z,1509673105.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:25.311Z,1509673105.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:25.689Z,1509673105.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:25.706Z,1509673105.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:26.104Z,1509673106.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:26.121Z,1509673106.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:26.503Z,1509673106.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:26.524Z,1509673106.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:26.904Z,1509673106.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:26.924Z,1509673106.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:27.291Z,1509673107.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:27.306Z,1509673107.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:27.691Z,1509673107.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:27.711Z,1509673107.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:28.090Z,1509673108.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:28.105Z,1509673108.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:28.490Z,1509673108.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:28.523Z,1509673108.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:28.901Z,1509673108.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:28.934Z,1509673108.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:29.297Z,1509673109.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:29.332Z,1509673109.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:29.697Z,1509673109.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:29.733Z,1509673109.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:30.120Z,1509673110.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:30.198Z,1509673110.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:30.488Z,1509673110.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:30.503Z,1509673110.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:30.889Z,1509673110.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:30.904Z,1509673110.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:31.289Z,1509673111.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:31.339Z,1509673111.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:31.688Z,1509673111.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:31.703Z,1509673111.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:32.123Z,1509673112.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:32.187Z,1509673112.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:32.501Z,1509673112.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:32.562Z,1509673112.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:32.901Z,1509673112.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:32.917Z,1509673112.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:33.277Z,1509673113.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:33.291Z,1509673113.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:33.680Z,1509673113.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:33.712Z,1509673113.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:34.126Z,1509673114.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:34.162Z,1509673114.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:34.487Z,1509673114.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:34.517Z,1509673114.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:34.905Z,1509673114.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:34.921Z,1509673114.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:34.976Z,1509673114.976 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:38:34.976Z,1509673114.976 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T01:38:34.977Z,1509673114.977 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:38:35.024Z,1509673115.024 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:38:35.293Z,1509673115.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:35.319Z,1509673115.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:38:35.319Z,1509673115.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:35.381Z,1509673115.381 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:38:35.490Z,1509673115.490 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:38:35.698Z,1509673115.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:35.734Z,1509673115.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:38:35.735Z,1509673115.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:36.086Z,1509673116.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:36.101Z,1509673116.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:38:36.102Z,1509673116.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:36.486Z,1509673116.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:36.500Z,1509673116.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:38:36.501Z,1509673116.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:36.884Z,1509673116.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:36.899Z,1509673116.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:38:36.900Z,1509673116.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:36.992Z,1509673116.992 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:38:36.992Z,1509673116.992 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T01:38:37.104Z,1509673117.104 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:38:37.105Z,1509673117.105 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:38:37.105Z,1509673117.105 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:38:37.105Z,1509673117.105 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:38:37.285Z,1509673117.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:37.306Z,1509673117.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:38:37.307Z,1509673117.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:37.687Z,1509673117.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:37.702Z,1509673117.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:38:37.703Z,1509673117.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:38.093Z,1509673118.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:38.109Z,1509673118.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:38:38.110Z,1509673118.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:38.490Z,1509673118.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:38.505Z,1509673118.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:38:38.506Z,1509673118.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:38.892Z,1509673118.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:38.919Z,1509673118.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:38:38.920Z,1509673118.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:39.293Z,1509673119.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:39.308Z,1509673119.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:38:39.310Z,1509673119.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:39.692Z,1509673119.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:39.707Z,1509673119.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:38:39.708Z,1509673119.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:40.090Z,1509673120.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:40.106Z,1509673120.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:38:40.107Z,1509673120.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:40.493Z,1509673120.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:40.507Z,1509673120.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:38:40.508Z,1509673120.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:40.897Z,1509673120.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:40.912Z,1509673120.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:38:40.913Z,1509673120.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:41.224Z,1509673121.224 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:38:41.313Z,1509673121.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:41.351Z,1509673121.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:38:41.352Z,1509673121.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:41.359Z,1509673121.359 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:38:41.360Z,1509673121.360 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:38:41.361Z,1509673121.361 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:38:41.361Z,1509673121.361 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:38:41.702Z,1509673121.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:41.723Z,1509673121.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:38:41.724Z,1509673121.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:42.084Z,1509673122.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:42.111Z,1509673122.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:42.481Z,1509673122.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:42.515Z,1509673122.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:42.897Z,1509673122.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:42.912Z,1509673122.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:43.294Z,1509673123.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:43.309Z,1509673123.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:43.681Z,1509673123.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:43.751Z,1509673123.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:44.101Z,1509673124.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:44.117Z,1509673124.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:44.505Z,1509673124.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:44.521Z,1509673124.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:44.901Z,1509673124.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:44.962Z,1509673124.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:45.276Z,1509673125.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:45.312Z,1509673125.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:45.686Z,1509673125.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:45.713Z,1509673125.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:46.082Z,1509673126.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:46.139Z,1509673126.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:46.481Z,1509673126.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:46.514Z,1509673126.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:46.897Z,1509673126.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:46.957Z,1509673126.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:47.299Z,1509673127.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:47.362Z,1509673127.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:47.702Z,1509673127.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:47.717Z,1509673127.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:48.087Z,1509673128.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:48.118Z,1509673128.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:48.479Z,1509673128.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:48.515Z,1509673128.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:48.883Z,1509673128.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:48.897Z,1509673128.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:49.288Z,1509673129.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:49.320Z,1509673129.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:49.680Z,1509673129.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:49.695Z,1509673129.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:50.066Z,1509673130.066 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T01:38:50.066Z,1509673130.066 [NAL9602] Data Fault, FailCount= 3
2017-11-03T01:38:50.066Z,1509673130.066 [NAL9602](ERROR): Data Fault
2017-11-03T01:38:50.083Z,1509673130.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:50.098Z,1509673130.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:50.214Z,1509673130.214 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T01:38:50.462Z,1509673130.462 [NAL9602](INFO): Powering down
2017-11-03T01:38:50.480Z,1509673130.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:50.496Z,1509673130.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:50.884Z,1509673130.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:50.899Z,1509673130.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:51.287Z,1509673131.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:51.302Z,1509673131.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:51.396Z,1509673131.396 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T01:38:51.396Z,1509673131.396 [NAL9602] No Fault, FailCount= 3
2017-11-03T01:38:51.683Z,1509673131.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:51.698Z,1509673131.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:52.088Z,1509673132.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:52.103Z,1509673132.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:52.490Z,1509673132.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:52.504Z,1509673132.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:52.884Z,1509673132.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:52.899Z,1509673132.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:53.286Z,1509673133.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:53.307Z,1509673133.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:53.688Z,1509673133.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:53.707Z,1509673133.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:54.089Z,1509673134.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:54.104Z,1509673134.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:54.491Z,1509673134.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:54.506Z,1509673134.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:54.884Z,1509673134.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:54.898Z,1509673134.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:55.287Z,1509673135.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:55.307Z,1509673135.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:55.685Z,1509673135.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:55.705Z,1509673135.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:56.088Z,1509673136.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:56.103Z,1509673136.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:56.491Z,1509673136.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:56.507Z,1509673136.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:56.891Z,1509673136.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:56.906Z,1509673136.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:57.286Z,1509673137.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:57.306Z,1509673137.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:57.692Z,1509673137.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:57.707Z,1509673137.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:58.091Z,1509673138.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:58.150Z,1509673138.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:38:58.492Z,1509673138.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:38:58.510Z,1509673138.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:01.779Z,1509673141.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:01.823Z,1509673141.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:01.959Z,1509673141.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:02.002Z,1509673142.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:02.357Z,1509673142.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:02.372Z,1509673142.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:02.759Z,1509673142.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:02.815Z,1509673142.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:03.156Z,1509673143.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:03.171Z,1509673143.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:03.556Z,1509673143.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:03.651Z,1509673143.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:03.967Z,1509673143.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:04.022Z,1509673144.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:04.365Z,1509673144.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:04.379Z,1509673144.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:04.766Z,1509673144.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:04.782Z,1509673144.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:05.160Z,1509673145.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:05.175Z,1509673145.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:05.564Z,1509673145.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:05.628Z,1509673145.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:05.966Z,1509673145.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:05.981Z,1509673145.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:06.358Z,1509673146.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:06.378Z,1509673146.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:06.766Z,1509673146.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:06.783Z,1509673146.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:07.162Z,1509673147.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:07.177Z,1509673147.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:07.564Z,1509673147.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:07.579Z,1509673147.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:07.964Z,1509673147.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:07.979Z,1509673147.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:08.352Z,1509673148.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:08.377Z,1509673148.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:08.752Z,1509673148.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:08.778Z,1509673148.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:09.162Z,1509673149.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:09.177Z,1509673149.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:09.564Z,1509673149.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:09.579Z,1509673149.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:09.579Z,1509673149.579 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2017-11-03T01:39:09.579Z,1509673149.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:39:09.581Z,1509673149.581 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:09.581Z,1509673149.581 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2017-11-03T01:39:09.582Z,1509673149.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:39:09.583Z,1509673149.583 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:09.583Z,1509673149.583 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2017-11-03T01:39:09.583Z,1509673149.583 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:39:09.665Z,1509673149.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:39:09.665Z,1509673149.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:39:09.665Z,1509673149.665 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:39:09.954Z,1509673149.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:10.072Z,1509673150.072 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:39:10.072Z,1509673150.072 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2017-11-03T01:39:10.073Z,1509673150.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:39:10.073Z,1509673150.073 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2017-11-03T01:39:10.073Z,1509673150.073 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:39:10.073Z,1509673150.073 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2017-11-03T01:39:10.354Z,1509673150.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:10.379Z,1509673150.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:39:10.379Z,1509673150.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:39:10.380Z,1509673150.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:39:10.380Z,1509673150.380 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:39:10.381Z,1509673150.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:39:10.381Z,1509673150.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:39:10.381Z,1509673150.381 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:39:10.382Z,1509673150.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:39:10.382Z,1509673150.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:39:10.754Z,1509673150.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:10.789Z,1509673150.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:11.155Z,1509673151.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:11.195Z,1509673151.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:11.558Z,1509673151.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:11.590Z,1509673151.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:11.957Z,1509673151.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:11.990Z,1509673151.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:12.356Z,1509673152.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:12.387Z,1509673152.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:12.759Z,1509673152.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:12.794Z,1509673152.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:13.168Z,1509673153.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:13.207Z,1509673153.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:13.558Z,1509673153.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:13.593Z,1509673153.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:13.956Z,1509673153.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:13.972Z,1509673153.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:14.356Z,1509673154.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:14.370Z,1509673154.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:14.755Z,1509673154.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:14.775Z,1509673154.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:15.163Z,1509673155.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:15.212Z,1509673155.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:15.560Z,1509673155.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:15.575Z,1509673155.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:15.955Z,1509673155.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:16.010Z,1509673156.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:16.355Z,1509673156.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:16.371Z,1509673156.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:16.762Z,1509673156.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:16.819Z,1509673156.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:17.155Z,1509673157.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:17.170Z,1509673157.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:17.562Z,1509673157.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:17.653Z,1509673157.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:17.955Z,1509673157.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:17.969Z,1509673157.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:18.355Z,1509673158.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:18.407Z,1509673158.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:18.762Z,1509673158.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:18.803Z,1509673158.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:19.162Z,1509673159.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:19.177Z,1509673159.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:19.562Z,1509673159.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:19.618Z,1509673159.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:19.955Z,1509673159.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:19.975Z,1509673159.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:20.355Z,1509673160.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:20.374Z,1509673160.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:20.740Z,1509673160.740 [NAL9602](INFO): Powering up NAL9602
2017-11-03T01:39:20.757Z,1509673160.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:20.772Z,1509673160.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:21.170Z,1509673161.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:21.201Z,1509673161.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:21.563Z,1509673161.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:21.583Z,1509673161.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:21.958Z,1509673161.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:21.974Z,1509673161.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:22.361Z,1509673162.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:22.376Z,1509673162.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:22.755Z,1509673162.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:22.770Z,1509673162.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:23.170Z,1509673163.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:23.201Z,1509673163.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:23.560Z,1509673163.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:23.575Z,1509673163.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:23.960Z,1509673163.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:23.974Z,1509673163.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:24.361Z,1509673164.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:24.376Z,1509673164.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:24.759Z,1509673164.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:24.775Z,1509673164.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:25.171Z,1509673165.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:25.198Z,1509673165.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:25.560Z,1509673165.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:25.576Z,1509673165.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:25.961Z,1509673165.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:25.979Z,1509673165.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:26.365Z,1509673166.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:26.379Z,1509673166.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:26.766Z,1509673166.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:26.788Z,1509673166.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:27.177Z,1509673167.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:27.214Z,1509673167.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:27.565Z,1509673167.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:27.581Z,1509673167.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:27.966Z,1509673167.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:27.987Z,1509673167.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:28.366Z,1509673168.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:28.381Z,1509673168.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:28.765Z,1509673168.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:28.780Z,1509673168.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:29.166Z,1509673169.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:29.231Z,1509673169.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:29.554Z,1509673169.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:29.586Z,1509673169.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:29.956Z,1509673169.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:30.028Z,1509673170.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:30.352Z,1509673170.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:30.379Z,1509673170.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:30.758Z,1509673170.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:30.807Z,1509673170.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:31.177Z,1509673171.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:31.192Z,1509673171.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:31.542Z,1509673171.542 [NAL9602](INFO): NAL9602 initialized
2017-11-03T01:39:31.559Z,1509673171.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:31.706Z,1509673171.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:31.952Z,1509673171.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:31.979Z,1509673171.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:32.381Z,1509673172.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:32.435Z,1509673172.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:32.773Z,1509673172.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:32.789Z,1509673172.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:33.181Z,1509673173.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:33.199Z,1509673173.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:33.559Z,1509673173.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:33.646Z,1509673173.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:33.959Z,1509673173.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:33.984Z,1509673173.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:34.359Z,1509673174.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:34.385Z,1509673174.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:34.760Z,1509673174.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:34.785Z,1509673174.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:35.151Z,1509673175.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:35.178Z,1509673175.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:35.582Z,1509673175.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:35.597Z,1509673175.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:35.979Z,1509673175.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:35.999Z,1509673175.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:36.378Z,1509673176.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:36.393Z,1509673176.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:36.759Z,1509673176.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:36.789Z,1509673176.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:37.159Z,1509673177.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:37.190Z,1509673177.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:37.560Z,1509673177.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:37.589Z,1509673177.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:37.963Z,1509673177.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:37.991Z,1509673177.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:38.369Z,1509673178.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:38.395Z,1509673178.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:38.765Z,1509673178.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:38.791Z,1509673178.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:39.191Z,1509673179.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:39.211Z,1509673179.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:39.563Z,1509673179.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:39.591Z,1509673179.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:39.959Z,1509673179.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:39.983Z,1509673179.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:40.360Z,1509673180.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:40.374Z,1509673180.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:40.759Z,1509673180.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:40.774Z,1509673180.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:41.194Z,1509673181.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:41.218Z,1509673181.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:41.570Z,1509673181.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:41.598Z,1509673181.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:41.974Z,1509673181.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:41.999Z,1509673181.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:42.370Z,1509673182.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:42.395Z,1509673182.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:42.758Z,1509673182.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:42.773Z,1509673182.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:43.157Z,1509673183.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:43.225Z,1509673183.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:43.561Z,1509673183.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:43.577Z,1509673183.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:43.960Z,1509673183.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:43.975Z,1509673183.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:44.378Z,1509673184.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:44.458Z,1509673184.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:44.773Z,1509673184.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:44.809Z,1509673184.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:45.177Z,1509673185.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:45.214Z,1509673185.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:45.563Z,1509673185.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:45.621Z,1509673185.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:45.964Z,1509673185.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:46.022Z,1509673186.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:46.367Z,1509673186.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:46.381Z,1509673186.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:46.767Z,1509673186.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:46.823Z,1509673186.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:47.164Z,1509673187.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:47.219Z,1509673187.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:47.588Z,1509673187.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:47.675Z,1509673187.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:47.977Z,1509673187.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:47.992Z,1509673187.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:48.377Z,1509673188.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:48.392Z,1509673188.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:48.767Z,1509673188.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:48.782Z,1509673188.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:49.174Z,1509673189.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:49.189Z,1509673189.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:49.560Z,1509673189.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:49.585Z,1509673189.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:49.959Z,1509673189.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:49.984Z,1509673189.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:50.381Z,1509673190.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:50.397Z,1509673190.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:50.774Z,1509673190.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:50.789Z,1509673190.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:51.188Z,1509673191.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:51.204Z,1509673191.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:51.559Z,1509673191.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:51.584Z,1509673191.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:51.959Z,1509673191.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:51.984Z,1509673191.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:52.355Z,1509673192.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:52.386Z,1509673192.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:52.760Z,1509673192.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:52.785Z,1509673192.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:53.164Z,1509673193.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:53.215Z,1509673193.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:53.565Z,1509673193.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:53.595Z,1509673193.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:53.981Z,1509673193.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:53.996Z,1509673193.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:54.364Z,1509673194.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:54.395Z,1509673194.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:54.759Z,1509673194.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:54.795Z,1509673194.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:55.187Z,1509673195.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:55.218Z,1509673195.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:55.560Z,1509673195.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:55.583Z,1509673195.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:55.959Z,1509673195.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:55.973Z,1509673195.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:56.369Z,1509673196.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:56.395Z,1509673196.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:56.769Z,1509673196.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:56.797Z,1509673196.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:57.173Z,1509673197.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:57.199Z,1509673197.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:57.555Z,1509673197.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:57.570Z,1509673197.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:57.956Z,1509673197.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:57.971Z,1509673197.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:58.359Z,1509673198.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:58.374Z,1509673198.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:39:58.763Z,1509673198.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:39:58.782Z,1509673198.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:02.049Z,1509673202.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:02.110Z,1509673202.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:02.257Z,1509673202.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:02.295Z,1509673202.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:02.653Z,1509673202.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:02.707Z,1509673202.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:03.091Z,1509673203.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:03.131Z,1509673203.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:03.435Z,1509673203.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:03.502Z,1509673203.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:03.833Z,1509673203.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:03.902Z,1509673203.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:04.232Z,1509673204.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:04.259Z,1509673204.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:04.653Z,1509673204.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:04.669Z,1509673204.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:05.084Z,1509673205.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:05.126Z,1509673205.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:05.458Z,1509673205.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:05.473Z,1509673205.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:05.832Z,1509673205.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:05.858Z,1509673205.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:06.236Z,1509673206.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:06.262Z,1509673206.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:06.631Z,1509673206.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:06.658Z,1509673206.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:07.033Z,1509673207.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:07.118Z,1509673207.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:07.449Z,1509673207.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:07.481Z,1509673207.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:07.850Z,1509673207.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:07.877Z,1509673207.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:08.254Z,1509673208.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:08.283Z,1509673208.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:08.639Z,1509673208.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:08.670Z,1509673208.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:09.037Z,1509673209.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:09.053Z,1509673209.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:09.439Z,1509673209.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:09.455Z,1509673209.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:09.842Z,1509673209.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:09.858Z,1509673209.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:10.243Z,1509673210.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:10.260Z,1509673210.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:10.647Z,1509673210.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:10.667Z,1509673210.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:11.047Z,1509673211.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:11.063Z,1509673211.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:11.461Z,1509673211.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:11.493Z,1509673211.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:11.842Z,1509673211.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:11.858Z,1509673211.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:12.240Z,1509673212.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:12.255Z,1509673212.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:12.644Z,1509673212.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:12.659Z,1509673212.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:13.043Z,1509673213.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:13.063Z,1509673213.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:13.452Z,1509673213.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:13.467Z,1509673213.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:13.853Z,1509673213.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:13.868Z,1509673213.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:14.252Z,1509673214.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:14.275Z,1509673214.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:14.640Z,1509673214.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:14.655Z,1509673214.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:15.043Z,1509673215.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:15.052Z,1509673215.052 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:40:15.052Z,1509673215.052 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:40:15.052Z,1509673215.052 [BPC1](ERROR): Data Fault
2017-11-03T01:40:15.060Z,1509673215.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:15.152Z,1509673215.152 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:40:15.443Z,1509673215.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:15.463Z,1509673215.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:15.850Z,1509673215.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:15.871Z,1509673215.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:16.240Z,1509673216.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:16.259Z,1509673216.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:16.349Z,1509673216.349 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:40:16.349Z,1509673216.349 [BPC1] No Fault, FailCount= 1
2017-11-03T01:40:16.652Z,1509673216.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:16.722Z,1509673216.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:17.092Z,1509673217.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:17.116Z,1509673217.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:17.456Z,1509673217.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:17.503Z,1509673217.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:17.841Z,1509673217.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:17.862Z,1509673217.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:18.240Z,1509673218.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:18.267Z,1509673218.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:18.644Z,1509673218.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:18.659Z,1509673218.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:19.074Z,1509673219.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:19.125Z,1509673219.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:19.453Z,1509673219.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:19.468Z,1509673219.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:19.856Z,1509673219.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:19.871Z,1509673219.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:20.252Z,1509673220.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:20.267Z,1509673220.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:20.640Z,1509673220.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:20.663Z,1509673220.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:21.028Z,1509673221.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:21.114Z,1509673221.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:21.428Z,1509673221.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:21.443Z,1509673221.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:21.835Z,1509673221.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:21.870Z,1509673221.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:22.235Z,1509673222.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:22.266Z,1509673222.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:22.641Z,1509673222.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:22.673Z,1509673222.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:23.045Z,1509673223.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:23.076Z,1509673223.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:23.452Z,1509673223.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:23.467Z,1509673223.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:23.844Z,1509673223.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:23.863Z,1509673223.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:24.240Z,1509673224.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:24.262Z,1509673224.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:24.639Z,1509673224.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:24.662Z,1509673224.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:25.044Z,1509673225.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:25.059Z,1509673225.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:25.453Z,1509673225.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:25.468Z,1509673225.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:25.853Z,1509673225.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:25.868Z,1509673225.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:26.254Z,1509673226.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:26.269Z,1509673226.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:26.642Z,1509673226.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:26.657Z,1509673226.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:27.041Z,1509673227.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:27.057Z,1509673227.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:27.444Z,1509673227.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:27.459Z,1509673227.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:27.838Z,1509673227.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:27.858Z,1509673227.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:28.242Z,1509673228.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:28.257Z,1509673228.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:28.654Z,1509673228.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:28.675Z,1509673228.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:29.053Z,1509673229.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:29.068Z,1509673229.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:29.453Z,1509673229.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:29.514Z,1509673229.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:29.839Z,1509673229.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:29.899Z,1509673229.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:30.240Z,1509673230.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:30.266Z,1509673230.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:30.644Z,1509673230.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:30.699Z,1509673230.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:31.028Z,1509673231.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:31.111Z,1509673231.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:31.445Z,1509673231.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:31.510Z,1509673231.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:31.849Z,1509673231.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:31.883Z,1509673231.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:32.245Z,1509673232.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:32.314Z,1509673232.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:32.632Z,1509673232.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:32.676Z,1509673232.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:33.035Z,1509673233.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:33.131Z,1509673233.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:33.432Z,1509673233.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:33.447Z,1509673233.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:33.835Z,1509673233.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:33.850Z,1509673233.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:34.235Z,1509673234.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:34.250Z,1509673234.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:34.645Z,1509673234.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:34.670Z,1509673234.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:35.045Z,1509673235.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:35.129Z,1509673235.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:35.446Z,1509673235.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:35.477Z,1509673235.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:35.831Z,1509673235.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:35.847Z,1509673235.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:36.231Z,1509673236.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:36.245Z,1509673236.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:36.632Z,1509673236.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:36.647Z,1509673236.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:37.035Z,1509673237.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:37.050Z,1509673237.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:37.182Z,1509673237.182 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:40:37.182Z,1509673237.182 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T01:40:37.182Z,1509673237.182 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:40:37.442Z,1509673237.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:37.474Z,1509673237.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:40:37.475Z,1509673237.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:37.557Z,1509673237.557 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:40:37.585Z,1509673237.585 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:40:37.677Z,1509673237.677 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:40:37.850Z,1509673237.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:37.889Z,1509673237.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:40:37.890Z,1509673237.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:38.250Z,1509673238.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:38.265Z,1509673238.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:40:38.266Z,1509673238.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:38.642Z,1509673238.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:38.657Z,1509673238.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:40:38.658Z,1509673238.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:39.044Z,1509673239.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:39.059Z,1509673239.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:40:39.060Z,1509673239.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:39.141Z,1509673239.141 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:40:39.141Z,1509673239.141 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T01:40:39.292Z,1509673239.292 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:40:39.293Z,1509673239.293 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:40:39.293Z,1509673239.293 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:40:39.293Z,1509673239.293 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:40:39.438Z,1509673239.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:39.457Z,1509673239.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:40:39.458Z,1509673239.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:39.841Z,1509673239.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:39.856Z,1509673239.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:40:39.857Z,1509673239.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:40.240Z,1509673240.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:40.255Z,1509673240.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:40:40.256Z,1509673240.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:40.650Z,1509673240.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:40.665Z,1509673240.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:40:40.666Z,1509673240.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:41.047Z,1509673241.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:41.062Z,1509673241.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:40:41.063Z,1509673241.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:41.449Z,1509673241.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:41.464Z,1509673241.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:40:41.465Z,1509673241.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:41.843Z,1509673241.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:41.862Z,1509673241.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:40:41.863Z,1509673241.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:42.240Z,1509673242.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:42.255Z,1509673242.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:40:42.256Z,1509673242.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:42.640Z,1509673242.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:42.655Z,1509673242.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:40:42.656Z,1509673242.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:43.043Z,1509673243.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:43.062Z,1509673243.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:40:43.063Z,1509673243.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:43.455Z,1509673243.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:43.494Z,1509673243.494 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:40:43.521Z,1509673243.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:40:43.522Z,1509673243.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:43.592Z,1509673243.592 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:40:43.593Z,1509673243.593 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:40:43.594Z,1509673243.594 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:40:43.595Z,1509673243.595 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:40:43.859Z,1509673243.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:43.879Z,1509673243.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:40:43.880Z,1509673243.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:44.265Z,1509673244.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:44.354Z,1509673244.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:44.633Z,1509673244.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:44.673Z,1509673244.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:45.036Z,1509673245.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:45.091Z,1509673245.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:45.434Z,1509673245.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:45.449Z,1509673245.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:45.834Z,1509673245.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:45.876Z,1509673245.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:46.232Z,1509673246.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:46.286Z,1509673246.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:46.646Z,1509673246.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:46.677Z,1509673246.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:47.050Z,1509673247.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:47.080Z,1509673247.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:47.448Z,1509673247.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:47.482Z,1509673247.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:47.869Z,1509673247.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:47.886Z,1509673247.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:48.239Z,1509673248.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:48.260Z,1509673248.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:48.637Z,1509673248.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:48.652Z,1509673248.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:49.036Z,1509673249.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:49.051Z,1509673249.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:49.450Z,1509673249.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:49.479Z,1509673249.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:49.850Z,1509673249.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:49.879Z,1509673249.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:50.250Z,1509673250.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:50.271Z,1509673250.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:50.643Z,1509673250.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:50.658Z,1509673250.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:51.043Z,1509673251.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:51.063Z,1509673251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:51.440Z,1509673251.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:51.455Z,1509673251.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:51.840Z,1509673251.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:51.855Z,1509673251.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:52.241Z,1509673252.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:52.256Z,1509673252.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:52.649Z,1509673252.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:52.665Z,1509673252.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:53.055Z,1509673253.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:53.108Z,1509673253.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:53.446Z,1509673253.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:53.461Z,1509673253.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:53.841Z,1509673253.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:53.871Z,1509673253.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:54.248Z,1509673254.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:54.263Z,1509673254.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:54.641Z,1509673254.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:54.664Z,1509673254.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:55.059Z,1509673255.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:55.117Z,1509673255.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:55.451Z,1509673255.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:55.478Z,1509673255.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:55.848Z,1509673255.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:55.887Z,1509673255.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:56.266Z,1509673256.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:56.295Z,1509673256.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:56.649Z,1509673256.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:56.707Z,1509673256.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:57.070Z,1509673257.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:57.175Z,1509673257.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:57.440Z,1509673257.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:57.455Z,1509673257.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:57.839Z,1509673257.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:57.859Z,1509673257.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:58.261Z,1509673258.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:58.395Z,1509673258.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:58.655Z,1509673258.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:58.683Z,1509673258.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:40:59.064Z,1509673259.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:40:59.163Z,1509673259.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:05.395Z,1509673265.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:05.412Z,1509673265.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:05.541Z,1509673265.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:05.620Z,1509673265.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:05.942Z,1509673265.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:05.987Z,1509673265.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:06.347Z,1509673266.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:06.363Z,1509673266.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:06.742Z,1509673266.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:06.757Z,1509673266.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:07.143Z,1509673267.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:07.158Z,1509673267.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:07.557Z,1509673267.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:07.572Z,1509673267.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:07.953Z,1509673267.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:07.968Z,1509673267.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:08.353Z,1509673268.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:08.369Z,1509673268.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:08.737Z,1509673268.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:08.752Z,1509673268.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:09.140Z,1509673269.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:09.155Z,1509673269.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:09.561Z,1509673269.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:09.576Z,1509673269.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:09.943Z,1509673269.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:09.958Z,1509673269.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:10.353Z,1509673270.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:10.369Z,1509673270.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:10.757Z,1509673270.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:10.772Z,1509673270.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:11.153Z,1509673271.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:11.168Z,1509673271.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:11.544Z,1509673271.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:11.559Z,1509673271.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:11.940Z,1509673271.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:11.955Z,1509673271.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:12.357Z,1509673272.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:12.373Z,1509673272.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:12.753Z,1509673272.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:12.768Z,1509673272.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:13.154Z,1509673273.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:13.169Z,1509673273.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:13.544Z,1509673273.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:13.559Z,1509673273.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:13.941Z,1509673273.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:13.972Z,1509673273.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:14.353Z,1509673274.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:14.369Z,1509673274.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:14.851Z,1509673274.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:14.906Z,1509673274.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:15.170Z,1509673275.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:15.215Z,1509673275.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:15.540Z,1509673275.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:15.594Z,1509673275.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:15.941Z,1509673275.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:15.963Z,1509673275.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:16.341Z,1509673276.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:16.373Z,1509673276.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:16.742Z,1509673276.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:16.771Z,1509673276.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:17.161Z,1509673277.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:17.205Z,1509673277.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:17.579Z,1509673277.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:17.635Z,1509673277.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:17.956Z,1509673277.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:18.007Z,1509673278.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:18.355Z,1509673278.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:18.399Z,1509673278.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:18.735Z,1509673278.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:18.763Z,1509673278.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:19.151Z,1509673279.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:19.207Z,1509673279.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:19.544Z,1509673279.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:19.575Z,1509673279.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:19.940Z,1509673279.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:19.998Z,1509673279.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:20.358Z,1509673280.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:20.407Z,1509673280.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:20.753Z,1509673280.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:20.789Z,1509673280.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:21.150Z,1509673281.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:21.165Z,1509673281.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:21.545Z,1509673281.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:21.560Z,1509673281.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:21.947Z,1509673281.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:21.966Z,1509673281.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:22.356Z,1509673282.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:22.371Z,1509673282.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:22.756Z,1509673282.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:22.771Z,1509673282.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:23.161Z,1509673283.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:23.176Z,1509673283.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:23.549Z,1509673283.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:23.564Z,1509673283.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:23.948Z,1509673283.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:23.963Z,1509673283.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:24.350Z,1509673284.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:24.365Z,1509673284.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:24.740Z,1509673284.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:24.755Z,1509673284.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:25.153Z,1509673285.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:25.168Z,1509673285.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:25.557Z,1509673285.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:25.589Z,1509673285.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:25.957Z,1509673285.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:25.972Z,1509673285.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:26.357Z,1509673286.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:26.388Z,1509673286.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:26.744Z,1509673286.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:26.759Z,1509673286.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:27.151Z,1509673287.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:27.170Z,1509673287.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:27.549Z,1509673287.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:27.571Z,1509673287.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:27.946Z,1509673287.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:27.961Z,1509673287.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:28.362Z,1509673288.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:28.393Z,1509673288.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:28.753Z,1509673288.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:28.769Z,1509673288.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:29.205Z,1509673289.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:29.223Z,1509673289.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:29.548Z,1509673289.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:29.563Z,1509673289.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:29.945Z,1509673289.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:29.972Z,1509673289.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:30.352Z,1509673290.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:30.367Z,1509673290.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:30.751Z,1509673290.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:30.767Z,1509673290.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:31.149Z,1509673291.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:31.164Z,1509673291.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:31.554Z,1509673291.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:31.569Z,1509673291.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:31.958Z,1509673291.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:31.974Z,1509673291.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:32.354Z,1509673292.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:32.430Z,1509673292.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:32.749Z,1509673292.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:32.765Z,1509673292.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:33.144Z,1509673293.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:33.199Z,1509673293.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:33.546Z,1509673293.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:33.567Z,1509673293.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:33.935Z,1509673293.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:33.986Z,1509673293.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:34.361Z,1509673294.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:34.415Z,1509673294.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:34.760Z,1509673294.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:34.775Z,1509673294.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:35.158Z,1509673295.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:35.173Z,1509673295.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:35.544Z,1509673295.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:35.569Z,1509673295.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:35.949Z,1509673295.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:35.972Z,1509673295.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:36.353Z,1509673296.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:36.385Z,1509673296.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:36.753Z,1509673296.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:36.784Z,1509673296.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:37.161Z,1509673297.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:37.193Z,1509673297.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:37.550Z,1509673297.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:37.565Z,1509673297.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:37.948Z,1509673297.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:37.963Z,1509673297.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:38.347Z,1509673298.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:38.374Z,1509673298.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:38.746Z,1509673298.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:38.761Z,1509673298.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:39.155Z,1509673299.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:39.171Z,1509673299.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:39.261Z,1509673299.261 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T01:41:39.554Z,1509673299.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:39.575Z,1509673299.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:39.961Z,1509673299.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:39.976Z,1509673299.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:40.361Z,1509673300.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:40.383Z,1509673300.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:40.748Z,1509673300.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:40.763Z,1509673300.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:41.165Z,1509673301.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:41.202Z,1509673301.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:41.525Z,1509673301.525 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T01:41:41.526Z,1509673301.526 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T01:41:41.526Z,1509673301.526 [DropWeight](ERROR): Hardware Fault
2017-11-03T01:41:41.566Z,1509673301.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:41.582Z,1509673301.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:41.679Z,1509673301.679 [CBIT](INFO): Critical error at 20171103T014141
2017-11-03T01:41:41.681Z,1509673301.681 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T01:41:41.681Z,1509673301.681 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T01:41:41.950Z,1509673301.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:41.971Z,1509673301.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:42.049Z,1509673302.049 [CBIT](INFO): Critical error at 20171103T014141
2017-11-03T01:41:42.362Z,1509673302.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:42.383Z,1509673302.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:42.759Z,1509673302.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:42.779Z,1509673302.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:43.189Z,1509673303.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:43.223Z,1509673303.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:43.549Z,1509673303.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:43.563Z,1509673303.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:43.950Z,1509673303.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:43.971Z,1509673303.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:44.348Z,1509673304.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:44.363Z,1509673304.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:44.751Z,1509673304.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:44.767Z,1509673304.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:45.150Z,1509673305.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:45.171Z,1509673305.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:45.558Z,1509673305.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:45.573Z,1509673305.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:45.959Z,1509673305.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:45.979Z,1509673305.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:46.360Z,1509673306.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:46.462Z,1509673306.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:46.740Z,1509673306.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:46.766Z,1509673306.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:47.142Z,1509673307.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:47.169Z,1509673307.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:47.543Z,1509673307.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:47.656Z,1509673307.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:47.941Z,1509673307.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:47.966Z,1509673307.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:48.362Z,1509673308.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:48.415Z,1509673308.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:48.764Z,1509673308.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:48.815Z,1509673308.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:49.161Z,1509673309.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:49.176Z,1509673309.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:49.543Z,1509673309.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:49.569Z,1509673309.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:49.939Z,1509673309.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:49.973Z,1509673309.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:50.340Z,1509673310.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:50.371Z,1509673310.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:50.737Z,1509673310.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:50.752Z,1509673310.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:51.146Z,1509673311.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:51.183Z,1509673311.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:51.557Z,1509673311.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:51.581Z,1509673311.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:51.960Z,1509673311.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:51.984Z,1509673311.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:52.358Z,1509673312.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:52.379Z,1509673312.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:52.747Z,1509673312.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:52.785Z,1509673312.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:53.155Z,1509673313.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:53.182Z,1509673313.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:53.547Z,1509673313.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:53.563Z,1509673313.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:53.943Z,1509673313.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:53.959Z,1509673313.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:54.353Z,1509673314.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:54.385Z,1509673314.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:54.750Z,1509673314.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:54.787Z,1509673314.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:55.158Z,1509673315.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:55.185Z,1509673315.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:55.545Z,1509673315.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:55.560Z,1509673315.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:55.944Z,1509673315.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:55.960Z,1509673315.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:56.344Z,1509673316.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:56.359Z,1509673316.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:56.764Z,1509673316.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:56.795Z,1509673316.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:57.175Z,1509673317.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:57.203Z,1509673317.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:57.554Z,1509673317.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:57.570Z,1509673317.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:57.953Z,1509673317.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:57.971Z,1509673317.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:58.354Z,1509673318.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:58.370Z,1509673318.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:58.750Z,1509673318.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:58.765Z,1509673318.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:41:59.150Z,1509673319.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:41:59.166Z,1509673319.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:02.350Z,1509673322.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:02.442Z,1509673322.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:02.567Z,1509673322.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:02.582Z,1509673322.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:02.977Z,1509673322.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:03.003Z,1509673323.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:03.381Z,1509673323.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:03.447Z,1509673323.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:03.777Z,1509673323.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:03.799Z,1509673323.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:04.167Z,1509673324.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:04.223Z,1509673324.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:04.567Z,1509673324.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:04.626Z,1509673324.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:04.967Z,1509673324.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:04.982Z,1509673324.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:05.377Z,1509673325.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:05.406Z,1509673325.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:05.773Z,1509673325.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:05.804Z,1509673325.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:06.174Z,1509673326.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:06.204Z,1509673326.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:06.566Z,1509673326.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:06.581Z,1509673326.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:06.961Z,1509673326.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:06.981Z,1509673326.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:07.366Z,1509673327.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:07.381Z,1509673327.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:07.770Z,1509673327.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:07.785Z,1509673327.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:08.164Z,1509673328.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:08.179Z,1509673328.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:08.576Z,1509673328.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:08.599Z,1509673328.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:08.977Z,1509673328.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:08.991Z,1509673328.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:09.373Z,1509673329.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:09.388Z,1509673329.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:09.768Z,1509673329.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:09.783Z,1509673329.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:10.171Z,1509673330.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:10.185Z,1509673330.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:10.571Z,1509673330.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:10.586Z,1509673330.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:10.587Z,1509673330.587 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2017-11-03T01:42:10.587Z,1509673330.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:42:10.589Z,1509673330.589 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:10.589Z,1509673330.589 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2017-11-03T01:42:10.589Z,1509673330.589 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:42:10.590Z,1509673330.590 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:10.591Z,1509673330.591 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2017-11-03T01:42:10.591Z,1509673330.591 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:42:10.669Z,1509673330.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:42:10.669Z,1509673330.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:42:10.669Z,1509673330.669 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:42:10.962Z,1509673330.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:11.068Z,1509673331.068 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:42:11.069Z,1509673331.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2017-11-03T01:42:11.069Z,1509673331.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:42:11.069Z,1509673331.069 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2017-11-03T01:42:11.070Z,1509673331.070 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:42:11.070Z,1509673331.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2017-11-03T01:42:11.372Z,1509673331.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:11.394Z,1509673331.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:42:11.395Z,1509673331.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:42:11.395Z,1509673331.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:42:11.395Z,1509673331.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:42:11.396Z,1509673331.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:42:11.396Z,1509673331.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:42:11.397Z,1509673331.397 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:42:11.397Z,1509673331.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:42:11.397Z,1509673331.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:42:11.773Z,1509673331.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:11.796Z,1509673331.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:12.181Z,1509673332.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:12.196Z,1509673332.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:12.579Z,1509673332.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:12.594Z,1509673332.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:12.963Z,1509673332.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:12.989Z,1509673332.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:13.378Z,1509673333.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:13.413Z,1509673333.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:13.761Z,1509673333.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:13.791Z,1509673333.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:14.163Z,1509673334.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:14.189Z,1509673334.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:14.582Z,1509673334.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:14.597Z,1509673334.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:14.986Z,1509673334.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:15.001Z,1509673335.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:15.382Z,1509673335.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:15.401Z,1509673335.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:15.758Z,1509673335.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:15.790Z,1509673335.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:16.161Z,1509673336.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:16.194Z,1509673336.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:16.565Z,1509673336.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:16.651Z,1509673336.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:16.961Z,1509673336.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:16.992Z,1509673336.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:17.374Z,1509673337.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:17.400Z,1509673337.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:17.774Z,1509673337.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:17.842Z,1509673337.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:18.174Z,1509673338.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:18.207Z,1509673338.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:18.560Z,1509673338.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:18.614Z,1509673338.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:18.963Z,1509673338.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:19.047Z,1509673339.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:19.367Z,1509673339.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:19.401Z,1509673339.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:19.768Z,1509673339.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:19.801Z,1509673339.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:20.167Z,1509673340.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:20.198Z,1509673340.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:20.573Z,1509673340.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:20.605Z,1509673340.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:20.977Z,1509673340.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:21.009Z,1509673341.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:21.371Z,1509673341.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:21.391Z,1509673341.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:21.770Z,1509673341.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:21.785Z,1509673341.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:22.169Z,1509673342.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:22.190Z,1509673342.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:22.571Z,1509673342.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:22.591Z,1509673342.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:22.969Z,1509673342.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:22.984Z,1509673342.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:23.373Z,1509673343.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:23.388Z,1509673343.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:23.772Z,1509673343.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:23.787Z,1509673343.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:24.173Z,1509673344.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:24.188Z,1509673344.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:24.571Z,1509673344.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:24.595Z,1509673344.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:24.965Z,1509673344.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:24.980Z,1509673344.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:25.372Z,1509673345.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:25.387Z,1509673345.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:25.768Z,1509673345.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:25.795Z,1509673345.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:26.171Z,1509673346.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:26.191Z,1509673346.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:26.581Z,1509673346.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:26.603Z,1509673346.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:26.982Z,1509673346.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:27.002Z,1509673347.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:27.388Z,1509673347.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:27.407Z,1509673347.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:27.773Z,1509673347.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:27.795Z,1509673347.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:28.169Z,1509673348.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:28.187Z,1509673348.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:28.573Z,1509673348.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:28.589Z,1509673348.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:28.968Z,1509673348.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:28.983Z,1509673348.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:29.383Z,1509673349.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:29.399Z,1509673349.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:29.786Z,1509673349.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:29.802Z,1509673349.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:30.180Z,1509673350.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:30.195Z,1509673350.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:30.569Z,1509673350.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:30.631Z,1509673350.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:30.970Z,1509673350.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:31.031Z,1509673351.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:31.361Z,1509673351.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:31.390Z,1509673351.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:31.758Z,1509673351.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:31.842Z,1509673351.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:32.163Z,1509673352.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:32.188Z,1509673352.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:32.581Z,1509673352.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:32.638Z,1509673352.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:32.982Z,1509673352.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:33.075Z,1509673353.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:33.377Z,1509673353.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:33.392Z,1509673353.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:33.763Z,1509673353.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:33.789Z,1509673353.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:34.163Z,1509673354.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:34.189Z,1509673354.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:34.564Z,1509673354.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:34.589Z,1509673354.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:34.963Z,1509673354.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:34.989Z,1509673354.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:35.377Z,1509673355.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:35.400Z,1509673355.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:35.774Z,1509673355.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:35.803Z,1509673355.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:36.173Z,1509673356.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:36.199Z,1509673356.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:36.567Z,1509673356.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:36.600Z,1509673356.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:36.960Z,1509673356.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:36.975Z,1509673356.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:37.365Z,1509673357.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:37.380Z,1509673357.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:37.761Z,1509673357.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:37.799Z,1509673357.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:38.160Z,1509673358.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:38.175Z,1509673358.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:38.577Z,1509673358.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:38.602Z,1509673358.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:38.981Z,1509673358.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:39.010Z,1509673359.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:39.378Z,1509673359.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:39.401Z,1509673359.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:39.763Z,1509673359.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:39.778Z,1509673359.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:40.160Z,1509673360.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:40.176Z,1509673360.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:40.561Z,1509673360.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:40.576Z,1509673360.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:40.966Z,1509673360.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:41.006Z,1509673361.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:41.382Z,1509673361.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:41.413Z,1509673361.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:41.774Z,1509673361.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:41.810Z,1509673361.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:42.176Z,1509673362.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:42.204Z,1509673362.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:42.561Z,1509673362.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:42.576Z,1509673362.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:42.958Z,1509673362.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:42.987Z,1509673362.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:43.369Z,1509673363.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:43.384Z,1509673363.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:43.776Z,1509673363.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:43.795Z,1509673363.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:44.170Z,1509673364.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:44.191Z,1509673364.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:44.574Z,1509673364.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:44.638Z,1509673364.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:44.978Z,1509673364.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:45.042Z,1509673365.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:45.380Z,1509673365.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:45.403Z,1509673365.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:45.778Z,1509673365.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:45.827Z,1509673365.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:46.171Z,1509673366.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:46.191Z,1509673366.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:46.571Z,1509673366.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:46.630Z,1509673366.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:46.967Z,1509673366.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:46.983Z,1509673366.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:47.376Z,1509673367.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:47.427Z,1509673367.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:47.780Z,1509673367.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:47.795Z,1509673367.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:48.180Z,1509673368.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:48.195Z,1509673368.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:48.571Z,1509673368.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:48.591Z,1509673368.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:48.970Z,1509673368.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:48.991Z,1509673368.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:49.359Z,1509673369.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:49.379Z,1509673369.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:49.768Z,1509673369.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:49.802Z,1509673369.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:50.160Z,1509673370.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:50.175Z,1509673370.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:50.577Z,1509673370.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:50.607Z,1509673370.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:50.988Z,1509673370.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:51.003Z,1509673371.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:51.370Z,1509673371.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:51.385Z,1509673371.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:51.769Z,1509673371.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:51.784Z,1509673371.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:52.163Z,1509673372.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:52.189Z,1509673372.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:52.564Z,1509673372.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:52.579Z,1509673372.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:52.968Z,1509673372.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:52.983Z,1509673372.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:53.370Z,1509673373.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:53.391Z,1509673373.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:53.781Z,1509673373.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:53.809Z,1509673373.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:54.181Z,1509673374.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:54.211Z,1509673374.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:54.569Z,1509673374.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:54.584Z,1509673374.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:54.971Z,1509673374.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:54.986Z,1509673374.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:55.379Z,1509673375.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:55.415Z,1509673375.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:55.769Z,1509673375.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:55.787Z,1509673375.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:56.171Z,1509673376.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:56.191Z,1509673376.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:56.574Z,1509673376.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:56.590Z,1509673376.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:56.973Z,1509673376.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:56.989Z,1509673376.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:57.375Z,1509673377.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:57.395Z,1509673377.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:57.767Z,1509673377.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:57.787Z,1509673377.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:58.169Z,1509673378.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:58.184Z,1509673378.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:58.187Z,1509673378.187 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T01:37:57.0Z
2017-11-03T01:42:58.187Z,1509673378.187 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T01:42:58.187Z,1509673378.187 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T01:42:58.571Z,1509673378.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:58.591Z,1509673378.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:59.067Z,1509673379.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:59.130Z,1509673379.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:42:59.373Z,1509673379.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:42:59.431Z,1509673379.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:02.637Z,1509673382.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:02.675Z,1509673382.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:02.781Z,1509673382.781 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171103T001125/Courier0036.lzma
2017-11-03T01:43:02.831Z,1509673382.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:02.848Z,1509673382.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:03.199Z,1509673383.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:03.232Z,1509673383.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:03.583Z,1509673383.583 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0036.lzma.bak
2017-11-03T01:43:03.583Z,1509673383.583 [DataOverHttps](INFO): SBD MOMSN=5182403
2017-11-03T01:43:03.605Z,1509673383.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:03.674Z,1509673383.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:04.202Z,1509673384.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:04.225Z,1509673384.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:04.421Z,1509673384.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:04.483Z,1509673384.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:07.741Z,1509673387.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:07.748Z,1509673387.748 [PNI_TCM](ERROR): CRC does not match. Expected:0x27302 got:0x7361
2017-11-03T01:43:07.748Z,1509673387.748 [PNI_TCM](ERROR): CRC does not match. Expected:0x18691 got:0x7361
2017-11-03T01:43:07.749Z,1509673387.749 [PNI_TCM](ERROR): CRC does not match. Expected:0x23928 got:0x7361
2017-11-03T01:43:07.749Z,1509673387.749 [PNI_TCM](ERROR): CRC does not match. Expected:0x7583 got:0x7361
2017-11-03T01:43:07.749Z,1509673387.749 [PNI_TCM](ERROR): CRC does not match. Expected:0x33246 got:0x7361
2017-11-03T01:43:07.750Z,1509673387.750 [PNI_TCM](ERROR): CRC does not match. Expected:0x29714 got:0x7361
2017-11-03T01:43:07.750Z,1509673387.750 [PNI_TCM](ERROR): CRC does not match. Expected:0x1829 got:0x7361
2017-11-03T01:43:07.750Z,1509673387.750 [PNI_TCM](ERROR): CRC does not match. Expected:0x58712 got:0x7361
2017-11-03T01:43:07.820Z,1509673387.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:07.977Z,1509673387.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:08.010Z,1509673388.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:08.353Z,1509673388.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:08.387Z,1509673388.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:08.759Z,1509673388.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:08.785Z,1509673388.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:09.153Z,1509673389.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:09.186Z,1509673389.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:09.562Z,1509673389.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:09.589Z,1509673389.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:12.762Z,1509673392.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:12.791Z,1509673392.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:12.913Z,1509673392.913 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20171103T001125/Express0037.lzma
2017-11-03T01:43:12.953Z,1509673392.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:12.990Z,1509673392.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:13.342Z,1509673393.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:13.357Z,1509673393.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:13.711Z,1509673393.711 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0037.lzma.bak
2017-11-03T01:43:13.711Z,1509673393.711 [DataOverHttps](INFO): SBD MOMSN=5182407
2017-11-03T01:43:13.748Z,1509673393.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:13.771Z,1509673393.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:14.338Z,1509673394.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:14.359Z,1509673394.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:14.363Z,1509673394.363 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T01:43:14.363Z,1509673394.363 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T01:43:14.363Z,1509673394.363 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T01:43:14.549Z,1509673394.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:14.565Z,1509673394.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:17.849Z,1509673397.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:17.870Z,1509673397.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:18.042Z,1509673398.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:18.089Z,1509673398.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:18.422Z,1509673398.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:18.444Z,1509673398.444 [PNI_TCM](ERROR): CRC does not match. Expected:0x22112 got:0x19640
2017-11-03T01:43:18.492Z,1509673398.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:18.841Z,1509673398.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:18.856Z,1509673398.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:19.241Z,1509673399.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:19.257Z,1509673399.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:19.642Z,1509673399.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:19.734Z,1509673399.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:20.034Z,1509673400.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:20.051Z,1509673400.051 [PNI_TCM](ERROR): CRC does not match. Expected:0x24679 got:0x48742
2017-11-03T01:43:20.078Z,1509673400.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:20.445Z,1509673400.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:20.502Z,1509673400.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:20.824Z,1509673400.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:20.851Z,1509673400.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:21.219Z,1509673401.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:21.278Z,1509673401.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:21.623Z,1509673401.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:21.692Z,1509673401.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:22.020Z,1509673402.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:22.054Z,1509673402.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:22.443Z,1509673402.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:22.459Z,1509673402.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:22.851Z,1509673402.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:22.868Z,1509673402.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:23.233Z,1509673403.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:23.262Z,1509673403.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:23.618Z,1509673403.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:23.654Z,1509673403.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:24.018Z,1509673404.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:24.048Z,1509673404.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:24.422Z,1509673404.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:24.471Z,1509673404.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:24.823Z,1509673404.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:24.854Z,1509673404.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:25.217Z,1509673405.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:25.250Z,1509673405.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:25.659Z,1509673405.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:25.710Z,1509673405.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:26.037Z,1509673406.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:26.063Z,1509673406.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:26.444Z,1509673406.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:26.460Z,1509673406.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:26.820Z,1509673406.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:26.859Z,1509673406.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:27.219Z,1509673407.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:27.247Z,1509673407.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:27.665Z,1509673407.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:27.710Z,1509673407.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:28.021Z,1509673408.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:28.063Z,1509673408.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:28.439Z,1509673408.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:28.450Z,1509673408.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x64679 got:0x20760
2017-11-03T01:43:28.490Z,1509673408.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:28.861Z,1509673408.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:28.901Z,1509673408.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:29.251Z,1509673409.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:29.268Z,1509673409.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:29.624Z,1509673409.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:29.662Z,1509673409.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:30.017Z,1509673410.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:30.048Z,1509673410.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:30.423Z,1509673410.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:30.455Z,1509673410.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:30.823Z,1509673410.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:30.856Z,1509673410.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:31.231Z,1509673411.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:31.263Z,1509673411.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:31.644Z,1509673411.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:31.660Z,1509673411.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:32.046Z,1509673412.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:32.055Z,1509673412.055 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:43:32.055Z,1509673412.055 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:43:32.055Z,1509673412.055 [BPC1](ERROR): Data Fault
2017-11-03T01:43:32.070Z,1509673412.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:32.169Z,1509673412.169 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:43:32.441Z,1509673412.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:32.475Z,1509673412.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:32.820Z,1509673412.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:32.858Z,1509673412.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:33.243Z,1509673413.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:33.258Z,1509673413.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:33.348Z,1509673413.348 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:43:33.348Z,1509673413.348 [BPC1] No Fault, FailCount= 1
2017-11-03T01:43:33.626Z,1509673413.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:33.703Z,1509673413.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:33.904Z,1509673413.904 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:43:33.904Z,1509673413.904 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T01:43:33.904Z,1509673413.904 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:43:34.019Z,1509673414.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:34.062Z,1509673414.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:43:34.063Z,1509673414.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:34.157Z,1509673414.157 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:43:34.308Z,1509673414.308 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:43:34.460Z,1509673414.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:34.479Z,1509673414.479 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:43:34.480Z,1509673414.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:43:34.507Z,1509673414.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:34.847Z,1509673414.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:34.863Z,1509673414.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:43:34.864Z,1509673414.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:35.243Z,1509673415.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:35.350Z,1509673415.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:43:35.351Z,1509673415.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:35.623Z,1509673415.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:35.654Z,1509673415.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:43:35.655Z,1509673415.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:35.741Z,1509673415.741 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:43:35.741Z,1509673415.741 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T01:43:36.021Z,1509673416.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:36.051Z,1509673416.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T01:43:36.057Z,1509673416.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:36.093Z,1509673416.093 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:43:36.093Z,1509673416.093 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:43:36.093Z,1509673416.093 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:43:36.093Z,1509673416.093 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:43:36.419Z,1509673416.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:36.458Z,1509673416.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:43:36.459Z,1509673416.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:36.826Z,1509673416.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:36.857Z,1509673416.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:43:36.858Z,1509673416.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:37.223Z,1509673417.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:37.263Z,1509673417.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:43:37.263Z,1509673417.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:37.633Z,1509673417.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:37.663Z,1509673417.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:43:37.664Z,1509673417.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:38.031Z,1509673418.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:38.057Z,1509673418.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:43:38.058Z,1509673418.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:38.435Z,1509673418.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:38.461Z,1509673418.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:43:38.462Z,1509673418.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:38.815Z,1509673418.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:38.862Z,1509673418.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:43:38.863Z,1509673418.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:39.216Z,1509673419.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:39.230Z,1509673419.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T01:43:39.231Z,1509673419.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:39.668Z,1509673419.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:39.682Z,1509673419.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:43:39.683Z,1509673419.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:40.025Z,1509673420.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:40.054Z,1509673420.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:43:40.055Z,1509673420.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:40.229Z,1509673420.229 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:43:40.292Z,1509673420.292 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:43:40.293Z,1509673420.293 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:43:40.294Z,1509673420.294 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:43:40.295Z,1509673420.295 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:43:40.436Z,1509673420.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:40.502Z,1509673420.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:43:40.503Z,1509673420.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:40.833Z,1509673420.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:40.856Z,1509673420.856 [PNI_TCM](ERROR): CRC does not match. Expected:0x34625 got:0x5915
2017-11-03T01:43:40.883Z,1509673420.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:41.252Z,1509673421.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:41.275Z,1509673421.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:41.645Z,1509673421.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:41.661Z,1509673421.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:42.019Z,1509673422.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:42.067Z,1509673422.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:42.427Z,1509673422.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:42.459Z,1509673422.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:42.821Z,1509673422.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:42.856Z,1509673422.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:43.223Z,1509673423.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:43.256Z,1509673423.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:43.634Z,1509673423.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:43.665Z,1509673423.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:44.034Z,1509673424.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:44.067Z,1509673424.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:44.437Z,1509673424.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:44.467Z,1509673424.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:44.823Z,1509673424.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:44.839Z,1509673424.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:45.220Z,1509673425.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:45.266Z,1509673425.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:45.620Z,1509673425.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:45.637Z,1509673425.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:46.022Z,1509673426.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:46.042Z,1509673426.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:46.435Z,1509673426.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:46.465Z,1509673426.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:46.834Z,1509673426.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:46.895Z,1509673426.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:47.279Z,1509673427.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:47.380Z,1509673427.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:47.612Z,1509673427.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:47.651Z,1509673427.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:48.034Z,1509673428.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:48.041Z,1509673428.041 [PNI_TCM](ERROR): CRC does not match. Expected:0x64759 got:0x19709
2017-11-03T01:43:48.098Z,1509673428.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:48.427Z,1509673428.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:48.460Z,1509673428.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:48.829Z,1509673428.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:48.887Z,1509673428.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:49.233Z,1509673429.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:49.287Z,1509673429.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:49.644Z,1509673429.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:49.659Z,1509673429.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:50.086Z,1509673430.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:50.108Z,1509673430.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:50.443Z,1509673430.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:50.459Z,1509673430.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:50.829Z,1509673430.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:50.851Z,1509673430.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:51.234Z,1509673431.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:51.255Z,1509673431.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:51.629Z,1509673431.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:51.663Z,1509673431.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:52.055Z,1509673432.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:52.115Z,1509673432.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:52.442Z,1509673432.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:52.457Z,1509673432.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:52.842Z,1509673432.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:52.863Z,1509673432.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:53.241Z,1509673433.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:53.289Z,1509673433.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:53.622Z,1509673433.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:53.646Z,1509673433.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x25651 got:0x7361
2017-11-03T01:43:53.663Z,1509673433.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:54.012Z,1509673434.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:54.098Z,1509673434.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:54.428Z,1509673434.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:54.459Z,1509673434.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:54.825Z,1509673434.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:54.863Z,1509673434.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:55.220Z,1509673435.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:55.235Z,1509673435.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:55.636Z,1509673435.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:55.659Z,1509673435.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:56.036Z,1509673436.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:56.125Z,1509673436.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:56.430Z,1509673436.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:56.466Z,1509673436.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:56.827Z,1509673436.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:56.851Z,1509673436.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:57.232Z,1509673437.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:57.248Z,1509673437.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:57.630Z,1509673437.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:57.646Z,1509673437.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:58.027Z,1509673438.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:58.066Z,1509673438.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:58.445Z,1509673438.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:58.461Z,1509673438.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:58.842Z,1509673438.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:58.863Z,1509673438.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:59.244Z,1509673439.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:59.287Z,1509673439.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:43:59.619Z,1509673439.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:43:59.660Z,1509673439.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:00.023Z,1509673440.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:00.059Z,1509673440.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:00.426Z,1509673440.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:00.452Z,1509673440.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:00.824Z,1509673440.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:00.854Z,1509673440.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:01.223Z,1509673441.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:01.282Z,1509673441.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:01.633Z,1509673441.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:01.691Z,1509673441.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:02.040Z,1509673442.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:02.064Z,1509673442.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:02.436Z,1509673442.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:02.467Z,1509673442.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:02.831Z,1509673442.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:02.907Z,1509673442.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:03.225Z,1509673443.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:03.261Z,1509673443.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:03.621Z,1509673443.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:03.678Z,1509673443.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:04.027Z,1509673444.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:04.086Z,1509673444.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:04.434Z,1509673444.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:04.474Z,1509673444.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:04.856Z,1509673444.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:04.871Z,1509673444.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:05.240Z,1509673445.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:05.268Z,1509673445.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:05.629Z,1509673445.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:05.670Z,1509673445.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:06.073Z,1509673446.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:06.121Z,1509673446.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:06.423Z,1509673446.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:06.464Z,1509673446.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:06.825Z,1509673446.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:06.844Z,1509673446.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:07.222Z,1509673447.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:07.238Z,1509673447.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:07.637Z,1509673447.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:07.671Z,1509673447.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:08.063Z,1509673448.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:08.131Z,1509673448.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:08.439Z,1509673448.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:08.467Z,1509673448.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:08.826Z,1509673448.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:08.841Z,1509673448.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:09.226Z,1509673449.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:09.267Z,1509673449.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:09.620Z,1509673449.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:09.647Z,1509673449.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:10.023Z,1509673450.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:10.106Z,1509673450.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:10.435Z,1509673450.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:10.455Z,1509673450.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:10.831Z,1509673450.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:10.875Z,1509673450.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:11.234Z,1509673451.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:11.254Z,1509673451.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:11.626Z,1509673451.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:11.644Z,1509673451.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:12.034Z,1509673452.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:12.049Z,1509673452.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:12.438Z,1509673452.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:12.479Z,1509673452.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:12.830Z,1509673452.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:12.839Z,1509673452.839 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-11-03T01:44:12.867Z,1509673452.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:13.234Z,1509673453.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:13.241Z,1509673453.241 [PNI_TCM](ERROR): CRC does not match. Expected:0x3229 got:0x7106
2017-11-03T01:44:13.267Z,1509673453.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:13.643Z,1509673453.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:13.658Z,1509673453.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:14.044Z,1509673454.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:14.064Z,1509673454.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:14.458Z,1509673454.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:14.486Z,1509673454.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:14.832Z,1509673454.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:14.853Z,1509673454.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:18.068Z,1509673458.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:18.167Z,1509673458.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:18.299Z,1509673458.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:18.342Z,1509673458.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:18.717Z,1509673458.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:18.747Z,1509673458.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:19.113Z,1509673459.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:19.182Z,1509673459.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:19.510Z,1509673459.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:19.540Z,1509673459.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:19.901Z,1509673459.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:19.947Z,1509673459.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:20.300Z,1509673460.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:20.358Z,1509673460.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:20.697Z,1509673460.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:20.712Z,1509673460.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:21.097Z,1509673461.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:21.112Z,1509673461.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:21.510Z,1509673461.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:21.541Z,1509673461.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:21.910Z,1509673461.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:21.940Z,1509673461.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:22.314Z,1509673462.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:22.336Z,1509673462.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:22.715Z,1509673462.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:22.738Z,1509673462.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:23.095Z,1509673463.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:23.111Z,1509673463.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:23.496Z,1509673463.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:23.512Z,1509673463.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:23.895Z,1509673463.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:23.914Z,1509673463.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:24.309Z,1509673464.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:24.340Z,1509673464.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:24.709Z,1509673464.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:24.741Z,1509673464.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:25.109Z,1509673465.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:25.140Z,1509673465.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:25.496Z,1509673465.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:25.562Z,1509673465.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:25.900Z,1509673465.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:25.915Z,1509673465.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:26.322Z,1509673466.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:26.351Z,1509673466.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:26.705Z,1509673466.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:26.720Z,1509673466.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:27.113Z,1509673467.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:27.144Z,1509673467.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:27.500Z,1509673467.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:27.515Z,1509673467.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:27.900Z,1509673467.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:27.923Z,1509673467.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:28.352Z,1509673468.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:28.376Z,1509673468.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:28.717Z,1509673468.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:28.732Z,1509673468.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:29.113Z,1509673469.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:29.128Z,1509673469.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:29.506Z,1509673469.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:29.521Z,1509673469.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:29.907Z,1509673469.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:29.922Z,1509673469.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:30.317Z,1509673470.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:30.332Z,1509673470.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:30.718Z,1509673470.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:30.733Z,1509673470.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:31.118Z,1509673471.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:31.133Z,1509673471.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:31.507Z,1509673471.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:31.527Z,1509673471.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:31.894Z,1509673471.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:31.924Z,1509673471.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:32.317Z,1509673472.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:32.375Z,1509673472.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:32.716Z,1509673472.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:32.733Z,1509673472.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:33.116Z,1509673473.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:33.132Z,1509673473.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:33.508Z,1509673473.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:33.566Z,1509673473.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:33.906Z,1509673473.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:33.927Z,1509673473.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:34.313Z,1509673474.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:34.359Z,1509673474.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:34.717Z,1509673474.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:34.767Z,1509673474.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:35.116Z,1509673475.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:35.131Z,1509673475.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:35.507Z,1509673475.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:35.522Z,1509673475.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:35.896Z,1509673475.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:35.921Z,1509673475.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:36.320Z,1509673476.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:36.335Z,1509673476.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:36.719Z,1509673476.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:36.739Z,1509673476.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:37.117Z,1509673477.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:37.138Z,1509673477.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:37.507Z,1509673477.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:37.527Z,1509673477.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:37.905Z,1509673477.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:37.920Z,1509673477.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:38.320Z,1509673478.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:38.343Z,1509673478.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:38.719Z,1509673478.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:38.739Z,1509673478.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:39.116Z,1509673479.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:39.131Z,1509673479.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:39.506Z,1509673479.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:39.520Z,1509673479.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:39.892Z,1509673479.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:39.918Z,1509673479.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:40.319Z,1509673480.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:40.339Z,1509673480.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:40.720Z,1509673480.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:40.735Z,1509673480.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:41.113Z,1509673481.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:41.128Z,1509673481.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:41.496Z,1509673481.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:41.521Z,1509673481.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:41.906Z,1509673481.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:41.921Z,1509673481.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:42.355Z,1509673482.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:42.375Z,1509673482.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:42.716Z,1509673482.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:42.731Z,1509673482.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:43.114Z,1509673483.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:43.134Z,1509673483.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:43.507Z,1509673483.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:43.527Z,1509673483.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:43.905Z,1509673483.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:43.922Z,1509673483.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:44.317Z,1509673484.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:44.332Z,1509673484.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:44.716Z,1509673484.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:44.731Z,1509673484.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:45.116Z,1509673485.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:45.131Z,1509673485.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:45.507Z,1509673485.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:45.522Z,1509673485.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:45.906Z,1509673485.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:45.963Z,1509673485.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:46.317Z,1509673486.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:46.332Z,1509673486.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:46.729Z,1509673486.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:46.744Z,1509673486.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:47.113Z,1509673487.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:47.171Z,1509673487.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:47.497Z,1509673487.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:47.523Z,1509673487.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:47.899Z,1509673487.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:47.924Z,1509673487.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:48.314Z,1509673488.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:48.373Z,1509673488.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:48.717Z,1509673488.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:48.732Z,1509673488.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:49.118Z,1509673489.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:49.174Z,1509673489.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:49.497Z,1509673489.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:49.555Z,1509673489.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:49.898Z,1509673489.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:49.927Z,1509673489.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:50.315Z,1509673490.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:50.330Z,1509673490.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:50.716Z,1509673490.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:50.731Z,1509673490.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:51.117Z,1509673491.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:51.133Z,1509673491.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:51.497Z,1509673491.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:51.526Z,1509673491.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:51.896Z,1509673491.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:51.941Z,1509673491.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:52.309Z,1509673492.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:52.332Z,1509673492.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:52.717Z,1509673492.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:52.732Z,1509673492.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:53.113Z,1509673493.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:53.128Z,1509673493.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:53.497Z,1509673493.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:53.524Z,1509673493.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:53.898Z,1509673493.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:53.923Z,1509673493.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:54.324Z,1509673494.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:54.339Z,1509673494.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:54.715Z,1509673494.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:54.734Z,1509673494.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:55.117Z,1509673495.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:55.131Z,1509673495.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:55.500Z,1509673495.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:55.526Z,1509673495.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:55.897Z,1509673495.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:55.927Z,1509673495.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:56.349Z,1509673496.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:56.375Z,1509673496.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:56.722Z,1509673496.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:56.737Z,1509673496.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:57.117Z,1509673497.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:57.132Z,1509673497.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:57.500Z,1509673497.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:57.526Z,1509673497.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:57.896Z,1509673497.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:57.927Z,1509673497.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:58.317Z,1509673498.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:58.332Z,1509673498.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:58.725Z,1509673498.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:58.741Z,1509673498.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:59.119Z,1509673499.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:59.139Z,1509673499.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:59.497Z,1509673499.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:59.524Z,1509673499.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:44:59.898Z,1509673499.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:44:59.954Z,1509673499.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:00.317Z,1509673500.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:00.332Z,1509673500.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:00.723Z,1509673500.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:00.738Z,1509673500.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:01.118Z,1509673501.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:01.133Z,1509673501.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:01.500Z,1509673501.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:01.551Z,1509673501.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:01.897Z,1509673501.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:01.930Z,1509673501.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:02.305Z,1509673502.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:02.359Z,1509673502.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:02.717Z,1509673502.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:02.739Z,1509673502.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:03.117Z,1509673503.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:03.177Z,1509673503.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:03.497Z,1509673503.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:03.543Z,1509673503.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:03.895Z,1509673503.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:03.922Z,1509673503.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:04.322Z,1509673504.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:04.337Z,1509673504.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:04.709Z,1509673504.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:04.741Z,1509673504.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:05.102Z,1509673505.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:05.129Z,1509673505.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:05.500Z,1509673505.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:05.524Z,1509673505.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:05.899Z,1509673505.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:05.936Z,1509673505.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:06.323Z,1509673506.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:06.347Z,1509673506.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:06.710Z,1509673506.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:06.739Z,1509673506.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:07.110Z,1509673507.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:07.132Z,1509673507.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:07.497Z,1509673507.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:07.529Z,1509673507.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:07.899Z,1509673507.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:07.932Z,1509673507.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:08.324Z,1509673508.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:08.339Z,1509673508.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:08.709Z,1509673508.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:08.739Z,1509673508.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:09.109Z,1509673509.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:09.132Z,1509673509.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:09.499Z,1509673509.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:09.536Z,1509673509.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:09.897Z,1509673509.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:09.912Z,1509673509.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:10.349Z,1509673510.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:10.386Z,1509673510.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:10.709Z,1509673510.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:10.739Z,1509673510.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:11.110Z,1509673511.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:11.133Z,1509673511.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:11.500Z,1509673511.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:11.523Z,1509673511.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:11.523Z,1509673511.523 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2017-11-03T01:45:11.523Z,1509673511.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:45:11.529Z,1509673511.529 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:11.529Z,1509673511.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2017-11-03T01:45:11.529Z,1509673511.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:45:11.531Z,1509673511.531 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:11.531Z,1509673511.531 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2017-11-03T01:45:11.531Z,1509673511.531 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:45:11.628Z,1509673511.628 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:45:11.629Z,1509673511.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:45:11.629Z,1509673511.629 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:45:11.903Z,1509673511.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:12.024Z,1509673512.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:45:12.024Z,1509673512.024 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2017-11-03T01:45:12.024Z,1509673512.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:45:12.025Z,1509673512.025 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2017-11-03T01:45:12.025Z,1509673512.025 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:45:12.025Z,1509673512.025 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2017-11-03T01:45:12.310Z,1509673512.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:12.339Z,1509673512.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:45:12.339Z,1509673512.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:45:12.339Z,1509673512.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:45:12.340Z,1509673512.340 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:45:12.340Z,1509673512.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:45:12.341Z,1509673512.341 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:45:12.341Z,1509673512.341 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:45:12.342Z,1509673512.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:45:12.342Z,1509673512.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:45:12.721Z,1509673512.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:12.751Z,1509673512.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:13.114Z,1509673513.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:13.143Z,1509673513.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:13.501Z,1509673513.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:13.516Z,1509673513.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:13.901Z,1509673513.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:13.962Z,1509673513.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:14.313Z,1509673514.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:14.328Z,1509673514.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:14.722Z,1509673514.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:14.743Z,1509673514.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:15.114Z,1509673515.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:15.147Z,1509673515.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:18.387Z,1509673518.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:18.420Z,1509673518.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:18.572Z,1509673518.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:18.602Z,1509673518.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:18.984Z,1509673518.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:18.000Z,1509673519.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:19.390Z,1509673519.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:19.431Z,1509673519.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:19.777Z,1509673519.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:19.807Z,1509673519.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:20.178Z,1509673520.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:20.246Z,1509673520.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:20.570Z,1509673520.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:20.619Z,1509673520.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:20.964Z,1509673520.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:20.999Z,1509673520.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:21.378Z,1509673521.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:21.399Z,1509673521.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:21.789Z,1509673521.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:21.804Z,1509673521.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:22.206Z,1509673522.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:22.221Z,1509673522.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:22.568Z,1509673522.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:22.596Z,1509673522.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:22.972Z,1509673522.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:22.988Z,1509673522.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:23.374Z,1509673523.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:23.389Z,1509673523.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:23.773Z,1509673523.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:23.788Z,1509673523.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:24.173Z,1509673524.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:24.188Z,1509673524.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:24.574Z,1509673524.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:24.589Z,1509673524.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:24.978Z,1509673524.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:24.993Z,1509673524.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:25.385Z,1509673525.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:25.400Z,1509673525.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:25.768Z,1509673525.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:25.784Z,1509673525.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:26.172Z,1509673526.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:26.191Z,1509673526.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:26.582Z,1509673526.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:26.670Z,1509673526.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:26.968Z,1509673526.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:26.991Z,1509673526.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:27.378Z,1509673527.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:27.393Z,1509673527.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:27.786Z,1509673527.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:27.821Z,1509673527.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:28.178Z,1509673528.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:28.193Z,1509673528.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:28.603Z,1509673528.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:28.681Z,1509673528.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:28.972Z,1509673528.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:28.991Z,1509673528.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:29.375Z,1509673529.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:29.391Z,1509673529.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:29.773Z,1509673529.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:29.788Z,1509673529.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:30.175Z,1509673530.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:30.195Z,1509673530.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:30.585Z,1509673530.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:30.600Z,1509673530.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:30.984Z,1509673530.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:30.999Z,1509673530.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:31.385Z,1509673531.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:31.400Z,1509673531.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:31.775Z,1509673531.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:31.835Z,1509673531.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:32.182Z,1509673532.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:32.197Z,1509673532.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:32.574Z,1509673532.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:32.631Z,1509673532.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:32.974Z,1509673532.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:32.995Z,1509673532.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:33.385Z,1509673533.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:33.401Z,1509673533.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:33.789Z,1509673533.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:33.832Z,1509673533.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:34.181Z,1509673534.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:34.197Z,1509673534.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:34.574Z,1509673534.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:34.629Z,1509673534.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:34.972Z,1509673534.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:35.030Z,1509673535.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:35.374Z,1509673535.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:35.395Z,1509673535.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:35.774Z,1509673535.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:35.789Z,1509673535.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:36.167Z,1509673536.167 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:45:36.167Z,1509673536.167 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T01:45:36.167Z,1509673536.167 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:45:36.193Z,1509673536.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:36.221Z,1509673536.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:45:36.222Z,1509673536.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:36.316Z,1509673536.316 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:45:36.317Z,1509673536.317 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T01:45:36.573Z,1509673536.573 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:45:36.609Z,1509673536.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:36.660Z,1509673536.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T01:45:36.665Z,1509673536.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:36.766Z,1509673536.766 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:45:36.989Z,1509673536.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:37.019Z,1509673537.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:45:37.020Z,1509673537.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:37.382Z,1509673537.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:37.411Z,1509673537.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:45:37.412Z,1509673537.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:37.764Z,1509673537.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:37.779Z,1509673537.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:45:37.780Z,1509673537.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:38.168Z,1509673538.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:38.183Z,1509673538.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:45:38.183Z,1509673538.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:38.564Z,1509673538.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:38.578Z,1509673538.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:45:38.579Z,1509673538.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:38.964Z,1509673538.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:38.986Z,1509673538.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:45:38.987Z,1509673538.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:39.381Z,1509673539.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:39.411Z,1509673539.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:45:39.412Z,1509673539.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:39.785Z,1509673539.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:39.809Z,1509673539.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:45:39.810Z,1509673539.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:40.177Z,1509673540.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:40.192Z,1509673540.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:45:40.209Z,1509673540.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:40.567Z,1509673540.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:40.586Z,1509673540.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:45:40.587Z,1509673540.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:40.967Z,1509673540.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:40.982Z,1509673540.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:45:40.983Z,1509673540.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:41.368Z,1509673541.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:41.390Z,1509673541.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:45:41.391Z,1509673541.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:41.773Z,1509673541.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:41.795Z,1509673541.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:45:41.796Z,1509673541.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:42.167Z,1509673542.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:42.181Z,1509673542.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:45:42.182Z,1509673542.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:42.582Z,1509673542.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:42.613Z,1509673542.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:45:42.614Z,1509673542.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:42.981Z,1509673542.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:42.996Z,1509673542.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:45:43.013Z,1509673543.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:43.377Z,1509673543.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:43.392Z,1509673543.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:45:43.393Z,1509673543.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:43.772Z,1509673543.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:43.787Z,1509673543.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:45:43.788Z,1509673543.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:44.171Z,1509673544.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:44.186Z,1509673544.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:45:44.187Z,1509673544.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:44.572Z,1509673544.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:44.594Z,1509673544.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:45:44.595Z,1509673544.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:44.966Z,1509673544.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:44.993Z,1509673544.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:45:44.994Z,1509673544.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:45.378Z,1509673545.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:45.393Z,1509673545.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T01:45:45.394Z,1509673545.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:45.781Z,1509673545.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:45.838Z,1509673545.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:45:45.839Z,1509673545.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:46.176Z,1509673546.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:46.190Z,1509673546.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:45:46.191Z,1509673546.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:46.572Z,1509673546.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:46.586Z,1509673546.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:45:46.587Z,1509673546.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:46.973Z,1509673546.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:46.994Z,1509673546.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:45:46.995Z,1509673546.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:47.374Z,1509673547.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:47.430Z,1509673547.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T01:45:47.430Z,1509673547.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:47.773Z,1509673547.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:47.788Z,1509673547.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:45:47.789Z,1509673547.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:48.172Z,1509673548.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:48.187Z,1509673548.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:45:48.188Z,1509673548.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:48.580Z,1509673548.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:48.630Z,1509673548.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:45:48.631Z,1509673548.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:48.980Z,1509673548.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:48.995Z,1509673548.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:45:48.996Z,1509673548.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:49.380Z,1509673549.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:49.426Z,1509673549.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:45:49.427Z,1509673549.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:49.774Z,1509673549.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:49.837Z,1509673549.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:45:49.838Z,1509673549.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:50.173Z,1509673550.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:50.204Z,1509673550.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:45:50.209Z,1509673550.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:50.575Z,1509673550.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:50.598Z,1509673550.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:45:50.599Z,1509673550.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:50.999Z,1509673550.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:51.038Z,1509673551.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:45:51.039Z,1509673551.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:51.375Z,1509673551.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:51.407Z,1509673551.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:45:51.408Z,1509673551.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:51.780Z,1509673551.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:51.815Z,1509673551.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:45:51.816Z,1509673551.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:52.180Z,1509673552.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:52.219Z,1509673552.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:45:52.220Z,1509673552.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:52.584Z,1509673552.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:52.616Z,1509673552.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:45:52.617Z,1509673552.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:53.002Z,1509673553.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:53.017Z,1509673553.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:45:53.018Z,1509673553.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:53.386Z,1509673553.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:53.409Z,1509673553.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:45:53.410Z,1509673553.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:53.772Z,1509673553.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:53.822Z,1509673553.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:45:53.823Z,1509673553.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:54.173Z,1509673554.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:54.222Z,1509673554.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:45:54.223Z,1509673554.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:54.574Z,1509673554.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:54.626Z,1509673554.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:45:54.627Z,1509673554.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:54.980Z,1509673554.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:55.059Z,1509673555.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T01:45:55.059Z,1509673555.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:55.376Z,1509673555.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:55.395Z,1509673555.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:45:55.396Z,1509673555.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:55.770Z,1509673555.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:55.819Z,1509673555.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:56.161Z,1509673556.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:56.195Z,1509673556.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:56.565Z,1509673556.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:56.580Z,1509673556.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:56.965Z,1509673556.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:57.009Z,1509673557.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:57.375Z,1509673557.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:57.414Z,1509673557.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:57.779Z,1509673557.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:57.819Z,1509673557.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:58.175Z,1509673558.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:58.218Z,1509673558.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:58.565Z,1509673558.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:58.643Z,1509673558.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:58.965Z,1509673558.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:59.024Z,1509673559.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:59.395Z,1509673559.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:59.410Z,1509673559.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:45:59.770Z,1509673559.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:45:59.785Z,1509673559.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:00.168Z,1509673560.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:00.209Z,1509673560.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:00.581Z,1509673560.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:00.634Z,1509673560.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:00.981Z,1509673560.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:01.006Z,1509673561.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:01.372Z,1509673561.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:01.395Z,1509673561.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:01.776Z,1509673561.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:01.799Z,1509673561.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:02.170Z,1509673562.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:02.230Z,1509673562.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:02.577Z,1509673562.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:02.592Z,1509673562.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:02.959Z,1509673562.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:02.985Z,1509673562.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:03.385Z,1509673563.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:03.431Z,1509673563.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:03.786Z,1509673563.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:03.807Z,1509673563.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:04.185Z,1509673564.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:04.231Z,1509673564.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:04.570Z,1509673564.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:04.618Z,1509673564.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:04.974Z,1509673564.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:04.990Z,1509673564.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:05.389Z,1509673565.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:05.482Z,1509673565.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:05.773Z,1509673565.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:05.789Z,1509673565.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:06.175Z,1509673566.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:06.189Z,1509673566.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:06.584Z,1509673566.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:06.599Z,1509673566.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:06.984Z,1509673566.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:06.999Z,1509673566.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:07.381Z,1509673567.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:07.396Z,1509673567.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:07.769Z,1509673567.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:07.789Z,1509673567.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:08.175Z,1509673568.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:08.190Z,1509673568.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:08.577Z,1509673568.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:08.591Z,1509673568.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:08.968Z,1509673568.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:08.992Z,1509673568.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:09.385Z,1509673569.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:09.400Z,1509673569.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:09.783Z,1509673569.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:09.797Z,1509673569.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:10.186Z,1509673570.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:10.208Z,1509673570.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:10.568Z,1509673570.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:10.591Z,1509673570.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:10.967Z,1509673570.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:10.983Z,1509673570.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:11.372Z,1509673571.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:11.387Z,1509673571.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:11.770Z,1509673571.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:11.786Z,1509673571.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:12.171Z,1509673572.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:12.191Z,1509673572.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:12.582Z,1509673572.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:12.621Z,1509673572.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:12.981Z,1509673572.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:13.012Z,1509673573.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:13.373Z,1509673573.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:13.388Z,1509673573.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:13.768Z,1509673573.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:13.783Z,1509673573.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:14.167Z,1509673574.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:14.187Z,1509673574.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:14.568Z,1509673574.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:14.583Z,1509673574.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:14.969Z,1509673574.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:15.030Z,1509673575.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:15.378Z,1509673575.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:15.394Z,1509673575.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:18.597Z,1509673578.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:18.639Z,1509673578.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:18.785Z,1509673578.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:18.822Z,1509673578.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:19.179Z,1509673579.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:19.194Z,1509673579.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:19.576Z,1509673579.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:19.634Z,1509673579.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:19.972Z,1509673579.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:19.987Z,1509673579.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:20.381Z,1509673580.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:20.430Z,1509673580.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:20.781Z,1509673580.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:20.796Z,1509673580.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:21.180Z,1509673581.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:21.234Z,1509673581.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:21.577Z,1509673581.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:21.592Z,1509673581.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:21.979Z,1509673581.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:21.994Z,1509673581.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:22.378Z,1509673582.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:22.394Z,1509673582.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:22.776Z,1509673582.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:22.792Z,1509673582.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:23.178Z,1509673583.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:23.193Z,1509673583.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:23.579Z,1509673583.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:23.599Z,1509673583.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:23.981Z,1509673583.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:24.003Z,1509673584.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:24.381Z,1509673584.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:24.398Z,1509673584.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:24.778Z,1509673584.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:24.840Z,1509673584.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:25.176Z,1509673585.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:25.191Z,1509673585.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:25.579Z,1509673585.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:25.594Z,1509673585.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:25.972Z,1509673585.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:25.995Z,1509673585.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:26.381Z,1509673586.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:26.397Z,1509673586.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:26.780Z,1509673586.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:26.795Z,1509673586.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:27.182Z,1509673587.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:27.197Z,1509673587.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:27.577Z,1509673587.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:27.592Z,1509673587.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:27.978Z,1509673587.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:27.993Z,1509673587.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:28.378Z,1509673588.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:28.399Z,1509673588.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:28.779Z,1509673588.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:28.794Z,1509673588.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:29.178Z,1509673589.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:29.193Z,1509673589.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:29.583Z,1509673589.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:29.598Z,1509673589.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:29.986Z,1509673589.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:30.001Z,1509673590.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:30.381Z,1509673590.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:30.402Z,1509673590.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:30.778Z,1509673590.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:30.815Z,1509673590.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:31.178Z,1509673591.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:31.193Z,1509673591.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:31.578Z,1509673591.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:31.598Z,1509673591.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:31.971Z,1509673591.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:31.987Z,1509673591.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:32.382Z,1509673592.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:32.446Z,1509673592.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:32.788Z,1509673592.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:32.810Z,1509673592.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:33.188Z,1509673593.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:33.260Z,1509673593.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:33.578Z,1509673593.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:33.599Z,1509673593.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:33.979Z,1509673593.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:34.034Z,1509673594.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:34.378Z,1509673594.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:34.399Z,1509673594.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:34.779Z,1509673594.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:34.839Z,1509673594.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:35.164Z,1509673595.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:35.189Z,1509673595.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:35.588Z,1509673595.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:35.639Z,1509673595.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:35.988Z,1509673595.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:36.003Z,1509673596.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:36.389Z,1509673596.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:36.410Z,1509673596.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:36.778Z,1509673596.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:36.887Z,1509673596.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:37.177Z,1509673597.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:37.210Z,1509673597.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:37.579Z,1509673597.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:37.594Z,1509673597.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:37.964Z,1509673597.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:37.989Z,1509673597.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:38.388Z,1509673598.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:38.403Z,1509673598.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:38.785Z,1509673598.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:38.799Z,1509673598.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:39.188Z,1509673599.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:39.203Z,1509673599.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:39.578Z,1509673599.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:39.599Z,1509673599.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:39.978Z,1509673599.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:39.993Z,1509673599.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:40.378Z,1509673600.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:40.399Z,1509673600.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:40.779Z,1509673600.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:40.799Z,1509673600.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:41.178Z,1509673601.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:41.193Z,1509673601.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:41.588Z,1509673601.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:41.603Z,1509673601.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:41.991Z,1509673601.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:42.011Z,1509673602.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:42.389Z,1509673602.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:42.404Z,1509673602.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:42.777Z,1509673602.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:42.804Z,1509673602.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:43.178Z,1509673603.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:43.199Z,1509673603.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:43.579Z,1509673603.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:43.593Z,1509673603.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:43.978Z,1509673603.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:43.999Z,1509673603.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:44.389Z,1509673604.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:44.404Z,1509673604.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:44.792Z,1509673604.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:44.810Z,1509673604.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:45.189Z,1509673605.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:45.204Z,1509673605.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:45.578Z,1509673605.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:45.593Z,1509673605.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:45.978Z,1509673605.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:45.998Z,1509673605.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:46.377Z,1509673606.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:46.436Z,1509673606.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:46.777Z,1509673606.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:46.792Z,1509673606.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:47.179Z,1509673607.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:47.198Z,1509673607.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:47.589Z,1509673607.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:47.660Z,1509673607.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:47.989Z,1509673607.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:48.004Z,1509673608.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:48.389Z,1509673608.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:48.439Z,1509673608.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:48.768Z,1509673608.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:48.794Z,1509673608.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:49.170Z,1509673609.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:49.236Z,1509673609.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:49.568Z,1509673609.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:49.640Z,1509673609.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:49.969Z,1509673609.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:49.994Z,1509673609.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:50.389Z,1509673610.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:50.404Z,1509673610.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:50.793Z,1509673610.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:50.808Z,1509673610.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:51.190Z,1509673611.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:51.205Z,1509673611.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:51.569Z,1509673611.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:51.603Z,1509673611.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:51.970Z,1509673611.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:51.997Z,1509673611.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:52.405Z,1509673612.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:52.423Z,1509673612.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:52.769Z,1509673612.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:52.799Z,1509673612.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:53.171Z,1509673613.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:53.196Z,1509673613.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:53.589Z,1509673613.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:53.611Z,1509673613.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:53.989Z,1509673613.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:54.005Z,1509673614.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:54.396Z,1509673614.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:54.411Z,1509673614.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:54.768Z,1509673614.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:54.794Z,1509673614.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:55.168Z,1509673615.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:55.229Z,1509673615.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:55.565Z,1509673615.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:55.599Z,1509673615.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:55.971Z,1509673615.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:55.995Z,1509673615.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:56.387Z,1509673616.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:56.407Z,1509673616.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:56.785Z,1509673616.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:56.806Z,1509673616.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:57.188Z,1509673617.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:57.203Z,1509673617.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:57.568Z,1509673617.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:57.598Z,1509673617.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:57.970Z,1509673617.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:58.002Z,1509673618.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:58.368Z,1509673618.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:58.403Z,1509673618.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:58.771Z,1509673618.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:58.797Z,1509673618.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:59.167Z,1509673619.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:59.198Z,1509673619.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:59.593Z,1509673619.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:46:59.608Z,1509673619.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:46:59.987Z,1509673619.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:00.006Z,1509673620.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:00.391Z,1509673620.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:00.406Z,1509673620.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:00.771Z,1509673620.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:00.797Z,1509673620.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:01.169Z,1509673621.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:01.200Z,1509673621.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:01.569Z,1509673621.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:01.603Z,1509673621.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:01.963Z,1509673621.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:01.999Z,1509673621.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:02.382Z,1509673622.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:02.415Z,1509673622.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:02.777Z,1509673622.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:02.806Z,1509673622.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:03.177Z,1509673623.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:03.207Z,1509673623.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:03.568Z,1509673623.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:03.583Z,1509673623.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:03.968Z,1509673623.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:04.005Z,1509673624.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:04.364Z,1509673624.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:04.383Z,1509673624.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:04.769Z,1509673624.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:04.777Z,1509673624.777 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:47:04.777Z,1509673624.777 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:47:04.777Z,1509673624.777 [BPC1](ERROR): Communications Fault
2017-11-03T01:47:04.785Z,1509673624.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:04.897Z,1509673624.897 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:47:05.168Z,1509673625.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:05.183Z,1509673625.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:05.581Z,1509673625.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:05.613Z,1509673625.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:05.981Z,1509673625.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:06.012Z,1509673626.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:06.101Z,1509673626.101 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:47:06.101Z,1509673626.101 [BPC1] No Fault, FailCount= 1
2017-11-03T01:47:06.389Z,1509673626.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:06.474Z,1509673626.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:06.769Z,1509673626.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:06.784Z,1509673626.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:07.168Z,1509673627.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:07.183Z,1509673627.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:07.568Z,1509673627.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:07.583Z,1509673627.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:07.967Z,1509673627.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:07.983Z,1509673627.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:08.386Z,1509673628.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:08.415Z,1509673628.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:08.790Z,1509673628.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:08.813Z,1509673628.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:09.181Z,1509673629.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:09.215Z,1509673629.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:09.571Z,1509673629.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:09.591Z,1509673629.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:09.967Z,1509673629.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:09.982Z,1509673629.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:10.367Z,1509673630.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:10.383Z,1509673630.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:10.772Z,1509673630.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:10.822Z,1509673630.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:11.171Z,1509673631.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:11.185Z,1509673631.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:11.581Z,1509673631.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:11.617Z,1509673631.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:11.985Z,1509673631.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:12.017Z,1509673632.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:12.385Z,1509673632.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:12.415Z,1509673632.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:12.771Z,1509673632.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:12.786Z,1509673632.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:13.171Z,1509673633.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:13.186Z,1509673633.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:13.572Z,1509673633.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:13.586Z,1509673633.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:13.971Z,1509673633.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:13.991Z,1509673633.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:14.386Z,1509673634.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:14.418Z,1509673634.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:14.777Z,1509673634.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:14.791Z,1509673634.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:15.177Z,1509673635.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:15.192Z,1509673635.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:15.574Z,1509673635.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:15.589Z,1509673635.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:18.672Z,1509673638.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:18.687Z,1509673638.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:18.827Z,1509673638.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:18.845Z,1509673638.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:19.235Z,1509673639.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:19.265Z,1509673639.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:19.641Z,1509673639.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:19.667Z,1509673639.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:20.034Z,1509673640.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:20.067Z,1509673640.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:20.419Z,1509673640.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:20.463Z,1509673640.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:20.823Z,1509673640.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:20.830Z,1509673640.830 [PNI_TCM](ERROR): CRC does not match. Expected:0x20033 got:0x58880
2017-11-03T01:47:20.868Z,1509673640.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:21.218Z,1509673641.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:21.262Z,1509673641.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:21.639Z,1509673641.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:21.691Z,1509673641.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:22.034Z,1509673642.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:22.067Z,1509673642.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:22.435Z,1509673642.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:22.466Z,1509673642.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:22.823Z,1509673642.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:22.883Z,1509673642.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:23.220Z,1509673643.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:23.235Z,1509673643.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:23.620Z,1509673643.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:23.671Z,1509673643.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:24.021Z,1509673644.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:24.075Z,1509673644.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:24.437Z,1509673644.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:24.474Z,1509673644.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:24.834Z,1509673644.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:24.844Z,1509673644.844 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T01:47:24.871Z,1509673644.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:25.235Z,1509673645.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:25.267Z,1509673645.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:25.622Z,1509673645.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:25.637Z,1509673645.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:26.019Z,1509673646.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:26.065Z,1509673646.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:26.419Z,1509673646.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:26.436Z,1509673646.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:26.820Z,1509673646.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:26.838Z,1509673646.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:27.221Z,1509673647.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:27.237Z,1509673647.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:27.633Z,1509673647.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:27.671Z,1509673647.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:28.033Z,1509673648.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:28.069Z,1509673648.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:28.427Z,1509673648.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:28.444Z,1509673648.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:28.821Z,1509673648.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:28.837Z,1509673648.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:29.220Z,1509673649.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:29.243Z,1509673649.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:29.620Z,1509673649.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:29.637Z,1509673649.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:30.021Z,1509673650.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:30.039Z,1509673650.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:30.435Z,1509673650.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:30.467Z,1509673650.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:30.846Z,1509673650.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:30.872Z,1509673650.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:31.234Z,1509673651.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:31.271Z,1509673651.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:31.620Z,1509673651.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:31.662Z,1509673651.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:32.023Z,1509673652.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:32.030Z,1509673652.030 [PNI_TCM](ERROR): CRC does not match. Expected:0x36621 got:0x21275
2017-11-03T01:47:32.067Z,1509673652.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:32.420Z,1509673652.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:32.467Z,1509673652.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:32.821Z,1509673652.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:32.838Z,1509673652.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:33.220Z,1509673653.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:33.239Z,1509673653.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:33.635Z,1509673653.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:33.667Z,1509673653.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:34.033Z,1509673654.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:34.074Z,1509673654.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:34.434Z,1509673654.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:34.469Z,1509673654.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:34.820Z,1509673654.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:34.883Z,1509673654.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:35.223Z,1509673655.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:35.230Z,1509673655.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x20418 got:0x49818
2017-11-03T01:47:35.268Z,1509673655.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:35.621Z,1509673655.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:35.664Z,1509673655.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:36.020Z,1509673656.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:36.037Z,1509673656.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:36.427Z,1509673656.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:36.485Z,1509673656.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:36.835Z,1509673656.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:36.867Z,1509673656.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:37.234Z,1509673657.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:37.306Z,1509673657.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:37.620Z,1509673657.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:37.646Z,1509673657.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:38.020Z,1509673658.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:38.072Z,1509673658.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:38.422Z,1509673658.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:38.478Z,1509673658.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:38.820Z,1509673658.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:38.867Z,1509673658.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:39.220Z,1509673659.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:39.236Z,1509673659.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:39.635Z,1509673659.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:39.667Z,1509673659.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:40.038Z,1509673660.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:40.070Z,1509673660.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:40.438Z,1509673660.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:40.466Z,1509673660.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:40.823Z,1509673660.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:40.866Z,1509673660.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:41.225Z,1509673661.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:41.242Z,1509673661.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:41.626Z,1509673661.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:41.647Z,1509673661.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:42.024Z,1509673662.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:42.064Z,1509673662.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:42.439Z,1509673662.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:42.471Z,1509673662.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:42.827Z,1509673662.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:42.844Z,1509673662.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:43.232Z,1509673663.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:43.247Z,1509673663.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:43.624Z,1509673663.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:43.650Z,1509673663.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:44.024Z,1509673664.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:44.044Z,1509673664.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:44.423Z,1509673664.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:44.442Z,1509673664.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:44.826Z,1509673664.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:44.841Z,1509673664.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:45.224Z,1509673665.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:45.268Z,1509673665.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:45.630Z,1509673665.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:45.649Z,1509673665.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:46.039Z,1509673666.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:46.070Z,1509673666.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:46.428Z,1509673666.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:46.443Z,1509673666.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:46.823Z,1509673666.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:46.864Z,1509673666.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:47.222Z,1509673667.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:47.245Z,1509673667.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:47.626Z,1509673667.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:47.643Z,1509673667.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:48.025Z,1509673668.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:48.040Z,1509673668.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:48.437Z,1509673668.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:48.478Z,1509673668.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:48.830Z,1509673668.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:48.838Z,1509673668.838 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-03T01:47:48.875Z,1509673668.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:49.239Z,1509673669.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:49.246Z,1509673669.246 [PNI_TCM](ERROR): CRC does not match. Expected:0x5902 got:0x39589
2017-11-03T01:47:49.294Z,1509673669.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:49.628Z,1509673669.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:49.643Z,1509673669.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:50.024Z,1509673670.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:50.066Z,1509673670.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:50.424Z,1509673670.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:50.443Z,1509673670.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:50.827Z,1509673670.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:50.887Z,1509673670.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:51.225Z,1509673671.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:51.240Z,1509673671.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:51.633Z,1509673671.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:51.690Z,1509673671.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:52.033Z,1509673672.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:52.074Z,1509673672.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:52.435Z,1509673672.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:52.491Z,1509673672.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:52.826Z,1509673672.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:52.843Z,1509673672.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:53.220Z,1509673673.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:53.271Z,1509673673.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:53.627Z,1509673673.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:53.647Z,1509673673.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:54.023Z,1509673674.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:54.042Z,1509673674.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:54.435Z,1509673674.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:54.451Z,1509673674.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:54.834Z,1509673674.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:54.873Z,1509673674.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:55.231Z,1509673675.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:55.250Z,1509673675.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:55.620Z,1509673675.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:55.639Z,1509673675.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:56.029Z,1509673676.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:56.044Z,1509673676.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:56.423Z,1509673676.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:56.469Z,1509673676.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:56.839Z,1509673676.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:56.855Z,1509673676.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:57.220Z,1509673677.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:57.254Z,1509673677.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:57.634Z,1509673677.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:57.641Z,1509673677.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x60774 got:0x7106
2017-11-03T01:47:57.674Z,1509673677.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:58.032Z,1509673678.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:58.069Z,1509673678.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:58.431Z,1509673678.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:58.450Z,1509673678.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:58.827Z,1509673678.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:58.845Z,1509673678.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:59.230Z,1509673679.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:59.250Z,1509673679.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:47:59.627Z,1509673679.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:47:59.669Z,1509673679.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:00.024Z,1509673680.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:00.043Z,1509673680.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:00.434Z,1509673680.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:00.449Z,1509673680.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:00.835Z,1509673680.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:00.855Z,1509673680.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:01.231Z,1509673681.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:01.268Z,1509673681.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:01.627Z,1509673681.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:01.646Z,1509673681.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:02.027Z,1509673682.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:02.045Z,1509673682.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:02.425Z,1509673682.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:02.441Z,1509673682.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:02.827Z,1509673682.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:02.855Z,1509673682.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:03.226Z,1509673683.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:03.248Z,1509673683.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:03.634Z,1509673683.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:03.694Z,1509673683.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:04.033Z,1509673684.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:04.066Z,1509673684.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:04.432Z,1509673684.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:04.474Z,1509673684.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:04.823Z,1509673684.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:04.842Z,1509673684.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:05.228Z,1509673685.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:05.290Z,1509673685.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:05.630Z,1509673685.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:05.645Z,1509673685.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:06.023Z,1509673686.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:06.079Z,1509673686.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:06.432Z,1509673686.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:06.451Z,1509673686.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:06.834Z,1509673686.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:06.883Z,1509673686.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:07.234Z,1509673687.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:07.283Z,1509673687.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:07.624Z,1509673687.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:07.659Z,1509673687.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:08.026Z,1509673688.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:08.048Z,1509673688.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:08.425Z,1509673688.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:08.443Z,1509673688.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:08.831Z,1509673688.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:08.847Z,1509673688.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:09.226Z,1509673689.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:09.259Z,1509673689.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:09.631Z,1509673689.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:09.650Z,1509673689.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:10.034Z,1509673690.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:10.054Z,1509673690.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:10.434Z,1509673690.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:10.449Z,1509673690.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:10.824Z,1509673690.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:10.859Z,1509673690.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:11.227Z,1509673691.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:11.246Z,1509673691.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:11.630Z,1509673691.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:11.646Z,1509673691.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:12.027Z,1509673692.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:12.043Z,1509673692.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:12.432Z,1509673692.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:12.472Z,1509673692.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:12.472Z,1509673692.472 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2017-11-03T01:48:12.473Z,1509673692.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:48:12.474Z,1509673692.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:12.474Z,1509673692.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2017-11-03T01:48:12.474Z,1509673692.474 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:48:12.476Z,1509673692.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:12.477Z,1509673692.477 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2017-11-03T01:48:12.477Z,1509673692.477 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:48:12.572Z,1509673692.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:48:12.573Z,1509673692.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:48:12.573Z,1509673692.573 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:48:12.829Z,1509673692.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:12.921Z,1509673692.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:48:12.921Z,1509673692.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2017-11-03T01:48:12.922Z,1509673692.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:48:12.922Z,1509673692.922 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2017-11-03T01:48:12.922Z,1509673692.922 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:48:12.922Z,1509673692.922 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2017-11-03T01:48:13.235Z,1509673693.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:13.249Z,1509673693.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:48:13.249Z,1509673693.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:48:13.249Z,1509673693.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:48:13.250Z,1509673693.250 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:48:13.250Z,1509673693.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:48:13.251Z,1509673693.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:48:13.251Z,1509673693.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:48:13.251Z,1509673693.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:48:13.252Z,1509673693.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:48:13.636Z,1509673693.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:13.650Z,1509673693.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:48:13.651Z,1509673693.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:14.027Z,1509673694.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:14.058Z,1509673694.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:48:14.059Z,1509673694.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:14.425Z,1509673694.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:14.444Z,1509673694.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:48:14.445Z,1509673694.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:14.831Z,1509673694.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:14.846Z,1509673694.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:48:14.847Z,1509673694.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:14.851Z,1509673694.851 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T01:48:14.851Z,1509673694.851 [Default:CheckIn:C.Wait] Stopped
2017-11-03T01:48:14.851Z,1509673694.851 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T01:48:14.851Z,1509673694.851 [Default:CheckIn:D] Running Loop=1
2017-11-03T01:48:15.230Z,1509673695.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:15.245Z,1509673695.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:48:15.246Z,1509673695.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:15.249Z,1509673695.249 [Default:CheckIn:D] Stopped
2017-11-03T01:48:15.249Z,1509673695.249 [Default:CheckIn:E] Running Loop=1
2017-11-03T01:48:15.636Z,1509673695.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:15.676Z,1509673695.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:48:15.677Z,1509673695.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:15.681Z,1509673695.681 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.128044 min 
2017-11-03T01:48:15.681Z,1509673695.681 [Default:CheckIn:E] Stopped
2017-11-03T01:48:15.681Z,1509673695.681 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T01:48:15.681Z,1509673695.681 [Default:CheckIn] Stopped
2017-11-03T01:48:15.681Z,1509673695.681 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T01:48:15.681Z,1509673695.681 [Default:CheckIn](INFO): Running loop #10
2017-11-03T01:48:15.682Z,1509673695.682 [Default:CheckIn] Running Loop=10
2017-11-03T01:48:15.682Z,1509673695.682 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T01:48:15.682Z,1509673695.682 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T01:48:18.737Z,1509673698.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:18.744Z,1509673698.744 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:48:18.744Z,1509673698.744 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:48:18.745Z,1509673698.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:48:18.745Z,1509673698.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:48:18.745Z,1509673698.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:48:18.746Z,1509673698.746 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:48:18.746Z,1509673698.746 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T01:48:18.838Z,1509673698.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:48:18.839Z,1509673698.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:18.986Z,1509673698.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:19.001Z,1509673699.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T01:48:19.002Z,1509673699.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:19.361Z,1509673699.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:19.414Z,1509673699.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T01:48:19.415Z,1509673699.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:19.764Z,1509673699.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:19.789Z,1509673699.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T01:48:19.790Z,1509673699.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:20.163Z,1509673700.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:20.187Z,1509673700.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T01:48:20.188Z,1509673700.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:20.580Z,1509673700.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:20.635Z,1509673700.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T01:48:20.636Z,1509673700.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:20.981Z,1509673700.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:20.995Z,1509673700.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T01:48:20.996Z,1509673700.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:21.377Z,1509673701.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:21.436Z,1509673701.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T01:48:21.437Z,1509673701.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:21.760Z,1509673701.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:21.818Z,1509673701.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T01:48:21.819Z,1509673701.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:22.160Z,1509673702.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:22.189Z,1509673702.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T01:48:22.190Z,1509673702.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:22.563Z,1509673702.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:22.589Z,1509673702.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T01:48:22.590Z,1509673702.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:22.962Z,1509673702.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:22.994Z,1509673702.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T01:48:22.995Z,1509673702.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:23.381Z,1509673703.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:23.396Z,1509673703.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T01:48:23.397Z,1509673703.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:23.785Z,1509673703.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:23.800Z,1509673703.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T01:48:23.801Z,1509673703.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:24.181Z,1509673704.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:24.195Z,1509673704.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T01:48:24.196Z,1509673704.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:24.560Z,1509673704.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:24.605Z,1509673704.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T01:48:24.606Z,1509673704.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:24.956Z,1509673704.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:24.983Z,1509673704.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T01:48:24.984Z,1509673704.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:25.360Z,1509673705.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:25.391Z,1509673705.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T01:48:25.392Z,1509673705.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:25.761Z,1509673705.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:25.775Z,1509673705.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T01:48:25.793Z,1509673705.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:26.160Z,1509673706.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:26.175Z,1509673706.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T01:48:26.176Z,1509673706.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:26.569Z,1509673706.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:26.596Z,1509673706.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T01:48:26.601Z,1509673706.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:26.977Z,1509673706.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:27.009Z,1509673707.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T01:48:27.010Z,1509673707.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:27.373Z,1509673707.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:27.404Z,1509673707.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T01:48:27.405Z,1509673707.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:27.763Z,1509673707.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:27.778Z,1509673707.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T01:48:27.779Z,1509673707.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:28.161Z,1509673708.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:28.176Z,1509673708.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T01:48:28.177Z,1509673708.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:28.568Z,1509673708.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:28.583Z,1509673708.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T01:48:28.584Z,1509673708.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:28.965Z,1509673708.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:28.979Z,1509673708.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T01:48:28.980Z,1509673708.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:29.378Z,1509673709.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:29.404Z,1509673709.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T01:48:29.405Z,1509673709.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:29.782Z,1509673709.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:29.810Z,1509673709.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T01:48:29.811Z,1509673709.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:30.178Z,1509673710.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:30.201Z,1509673710.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T01:48:30.202Z,1509673710.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:30.567Z,1509673710.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:30.582Z,1509673710.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T01:48:30.583Z,1509673710.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:30.960Z,1509673710.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:30.979Z,1509673710.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T01:48:30.980Z,1509673710.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:31.364Z,1509673711.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:31.378Z,1509673711.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T01:48:31.379Z,1509673711.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:31.768Z,1509673711.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:31.783Z,1509673711.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T01:48:31.784Z,1509673711.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:32.160Z,1509673712.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:32.230Z,1509673712.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T01:48:32.231Z,1509673712.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:32.573Z,1509673712.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:32.589Z,1509673712.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:32.981Z,1509673712.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:33.012Z,1509673713.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:33.382Z,1509673713.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:33.411Z,1509673713.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:33.768Z,1509673713.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:33.822Z,1509673713.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:34.169Z,1509673714.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:34.184Z,1509673714.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:34.571Z,1509673714.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:34.591Z,1509673714.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:34.969Z,1509673714.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:35.019Z,1509673715.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:35.373Z,1509673715.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:35.389Z,1509673715.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:35.772Z,1509673715.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:35.822Z,1509673715.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:36.174Z,1509673716.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:36.219Z,1509673716.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:36.572Z,1509673716.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:36.587Z,1509673716.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:36.965Z,1509673716.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:36.981Z,1509673716.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:37.369Z,1509673717.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:37.384Z,1509673717.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:37.772Z,1509673717.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:37.796Z,1509673717.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:38.171Z,1509673718.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:38.186Z,1509673718.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:38.574Z,1509673718.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:38.595Z,1509673718.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:38.973Z,1509673718.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:38.988Z,1509673718.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:39.372Z,1509673719.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:39.388Z,1509673719.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:39.768Z,1509673719.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:39.784Z,1509673719.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:40.165Z,1509673720.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:40.179Z,1509673720.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:40.571Z,1509673720.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:40.591Z,1509673720.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:40.968Z,1509673720.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:40.991Z,1509673720.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:41.373Z,1509673721.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:41.387Z,1509673721.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:41.773Z,1509673721.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:41.788Z,1509673721.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:42.173Z,1509673722.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:42.189Z,1509673722.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:42.570Z,1509673722.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:42.585Z,1509673722.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:42.971Z,1509673722.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:42.986Z,1509673722.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:43.371Z,1509673723.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:43.386Z,1509673723.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:43.772Z,1509673723.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:43.798Z,1509673723.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:44.168Z,1509673724.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:44.184Z,1509673724.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:44.573Z,1509673724.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:44.595Z,1509673724.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:44.977Z,1509673724.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:44.998Z,1509673724.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:45.374Z,1509673725.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:45.391Z,1509673725.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:45.768Z,1509673725.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:45.792Z,1509673725.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:46.170Z,1509673726.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:46.190Z,1509673726.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:46.570Z,1509673726.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:46.591Z,1509673726.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:46.968Z,1509673726.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:47.026Z,1509673727.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:47.377Z,1509673727.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:47.391Z,1509673727.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:47.776Z,1509673727.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:47.799Z,1509673727.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:48.176Z,1509673728.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:48.247Z,1509673728.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:48.556Z,1509673728.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:48.582Z,1509673728.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:48.971Z,1509673728.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:49.026Z,1509673729.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:49.370Z,1509673729.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:49.391Z,1509673729.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:49.757Z,1509673729.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:49.809Z,1509673729.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:50.156Z,1509673730.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:50.187Z,1509673730.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:50.581Z,1509673730.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:50.638Z,1509673730.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:50.977Z,1509673730.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:50.992Z,1509673730.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:51.381Z,1509673731.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:51.396Z,1509673731.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:51.760Z,1509673731.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:51.787Z,1509673731.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:52.161Z,1509673732.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:52.194Z,1509673732.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:52.563Z,1509673732.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:52.589Z,1509673732.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:52.960Z,1509673732.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:52.985Z,1509673732.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:53.382Z,1509673733.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:53.396Z,1509673733.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:53.785Z,1509673733.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:53.800Z,1509673733.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:54.181Z,1509673734.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:54.196Z,1509673734.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:54.556Z,1509673734.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:54.586Z,1509673734.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:54.960Z,1509673734.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:54.986Z,1509673734.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:55.360Z,1509673735.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:55.385Z,1509673735.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:55.763Z,1509673735.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:55.799Z,1509673735.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:56.160Z,1509673736.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:56.186Z,1509673736.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:56.581Z,1509673736.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:56.603Z,1509673736.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:56.985Z,1509673736.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:56.000Z,1509673737.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:57.381Z,1509673737.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:57.396Z,1509673737.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:57.761Z,1509673737.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:57.791Z,1509673737.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:58.162Z,1509673738.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:58.188Z,1509673738.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:58.564Z,1509673738.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:58.589Z,1509673738.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:58.960Z,1509673738.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:58.986Z,1509673738.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:59.382Z,1509673739.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:59.397Z,1509673739.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:48:59.781Z,1509673739.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:48:59.797Z,1509673739.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:00.181Z,1509673740.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:00.196Z,1509673740.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:00.562Z,1509673740.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:00.588Z,1509673740.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:00.961Z,1509673740.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:00.987Z,1509673740.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:01.360Z,1509673741.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:01.411Z,1509673741.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:01.757Z,1509673741.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:01.810Z,1509673741.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:02.160Z,1509673742.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:02.189Z,1509673742.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:02.581Z,1509673742.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:02.650Z,1509673742.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:02.978Z,1509673742.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:02.993Z,1509673742.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:03.381Z,1509673743.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:03.438Z,1509673743.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:03.760Z,1509673743.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:03.794Z,1509673743.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:04.156Z,1509673744.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:04.199Z,1509673744.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:04.561Z,1509673744.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:04.629Z,1509673744.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:04.960Z,1509673744.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:04.991Z,1509673744.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:05.382Z,1509673745.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:05.397Z,1509673745.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:05.781Z,1509673745.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:05.797Z,1509673745.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:06.181Z,1509673746.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:06.196Z,1509673746.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:06.557Z,1509673746.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:06.591Z,1509673746.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:06.961Z,1509673746.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:06.988Z,1509673746.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:07.361Z,1509673747.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:07.388Z,1509673747.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:07.757Z,1509673747.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:07.804Z,1509673747.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:08.161Z,1509673748.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:08.189Z,1509673748.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:08.582Z,1509673748.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:08.597Z,1509673748.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:08.978Z,1509673748.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:08.993Z,1509673748.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:09.382Z,1509673749.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:09.407Z,1509673749.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:09.760Z,1509673749.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:09.791Z,1509673749.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:10.156Z,1509673750.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:10.194Z,1509673750.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:10.561Z,1509673750.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:10.589Z,1509673750.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:10.960Z,1509673750.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:10.995Z,1509673750.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:11.381Z,1509673751.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:11.397Z,1509673751.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:11.782Z,1509673751.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:11.798Z,1509673751.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:12.180Z,1509673752.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:12.195Z,1509673752.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:12.560Z,1509673752.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:12.598Z,1509673752.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:12.961Z,1509673752.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:12.990Z,1509673752.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:13.366Z,1509673753.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:13.392Z,1509673753.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:13.762Z,1509673753.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:13.796Z,1509673753.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:14.161Z,1509673754.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:14.188Z,1509673754.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:14.582Z,1509673754.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:14.597Z,1509673754.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:14.983Z,1509673754.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:15.002Z,1509673755.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:15.383Z,1509673755.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:15.449Z,1509673755.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:15.763Z,1509673755.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:15.795Z,1509673755.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:18.854Z,1509673758.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:18.911Z,1509673758.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:19.097Z,1509673759.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:19.138Z,1509673759.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:19.498Z,1509673759.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:19.535Z,1509673759.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:19.905Z,1509673759.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:19.954Z,1509673759.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:20.306Z,1509673760.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:20.334Z,1509673760.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:20.691Z,1509673760.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:20.742Z,1509673760.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:21.089Z,1509673761.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:21.132Z,1509673761.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:21.492Z,1509673761.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:21.507Z,1509673761.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:21.891Z,1509673761.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:21.907Z,1509673761.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:22.305Z,1509673762.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:22.335Z,1509673762.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:22.697Z,1509673762.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:22.713Z,1509673762.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:23.097Z,1509673763.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:23.112Z,1509673763.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:23.493Z,1509673763.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:23.508Z,1509673763.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:23.891Z,1509673763.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:23.906Z,1509673763.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:24.297Z,1509673764.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:24.313Z,1509673764.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:24.693Z,1509673764.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:24.707Z,1509673764.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:25.092Z,1509673765.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:25.111Z,1509673765.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:25.493Z,1509673765.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:25.508Z,1509673765.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:25.891Z,1509673765.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:25.905Z,1509673765.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:26.294Z,1509673766.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:26.315Z,1509673766.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:26.698Z,1509673766.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:26.734Z,1509673766.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:27.105Z,1509673767.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:27.136Z,1509673767.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:27.492Z,1509673767.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:27.507Z,1509673767.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:27.891Z,1509673767.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:27.907Z,1509673767.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:28.306Z,1509673768.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:28.335Z,1509673768.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:28.706Z,1509673768.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:28.735Z,1509673768.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:29.097Z,1509673769.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:29.113Z,1509673769.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:29.492Z,1509673769.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:29.507Z,1509673769.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:29.891Z,1509673769.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:29.907Z,1509673769.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:30.298Z,1509673770.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:30.313Z,1509673770.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:30.705Z,1509673770.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:30.737Z,1509673770.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:31.098Z,1509673771.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:31.113Z,1509673771.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:31.492Z,1509673771.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:31.507Z,1509673771.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:31.889Z,1509673771.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:31.903Z,1509673771.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:32.305Z,1509673772.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:32.341Z,1509673772.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:32.667Z,1509673772.667 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T01:49:32.667Z,1509673772.667 [NAL9602] Data Fault, FailCount= 4
2017-11-03T01:49:32.667Z,1509673772.667 [NAL9602](ERROR): Data Fault
2017-11-03T01:49:32.691Z,1509673772.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:32.723Z,1509673772.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:32.813Z,1509673772.813 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T01:49:33.069Z,1509673773.069 [NAL9602](INFO): Powering down
2017-11-03T01:49:33.101Z,1509673773.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:33.148Z,1509673773.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:33.494Z,1509673773.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:33.509Z,1509673773.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:33.890Z,1509673773.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:33.910Z,1509673773.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:33.989Z,1509673773.989 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T01:49:33.989Z,1509673773.989 [NAL9602] No Fault, FailCount= 4
2017-11-03T01:49:34.278Z,1509673774.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:34.311Z,1509673774.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:34.676Z,1509673774.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:34.711Z,1509673774.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:35.084Z,1509673775.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:35.115Z,1509673775.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:35.486Z,1509673775.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:35.510Z,1509673775.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:35.886Z,1509673775.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:35.911Z,1509673775.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:36.284Z,1509673776.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:36.302Z,1509673776.302 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:49:36.302Z,1509673776.302 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:49:36.302Z,1509673776.302 [BPC1](ERROR): Communications Fault
2017-11-03T01:49:36.310Z,1509673776.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:36.413Z,1509673776.413 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:49:36.686Z,1509673776.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:36.711Z,1509673776.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:37.076Z,1509673777.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:37.099Z,1509673777.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:37.484Z,1509673777.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:37.513Z,1509673777.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:37.601Z,1509673777.601 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:49:37.601Z,1509673777.601 [BPC1] No Fault, FailCount= 1
2017-11-03T01:49:37.878Z,1509673777.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:37.951Z,1509673777.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:38.278Z,1509673778.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:38.309Z,1509673778.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:38.684Z,1509673778.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:38.715Z,1509673778.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:39.086Z,1509673779.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:39.121Z,1509673779.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:39.486Z,1509673779.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:39.539Z,1509673779.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:39.884Z,1509673779.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:39.899Z,1509673779.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:40.286Z,1509673780.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:40.322Z,1509673780.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:40.680Z,1509673780.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:40.699Z,1509673780.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:41.084Z,1509673781.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:41.121Z,1509673781.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:41.486Z,1509673781.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:41.522Z,1509673781.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:41.880Z,1509673781.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:41.895Z,1509673781.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:42.284Z,1509673782.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:42.299Z,1509673782.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:42.686Z,1509673782.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:42.723Z,1509673782.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:43.076Z,1509673783.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:43.091Z,1509673783.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:43.486Z,1509673783.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:43.521Z,1509673783.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:43.886Z,1509673783.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:43.923Z,1509673783.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:44.279Z,1509673784.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:44.294Z,1509673784.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:44.684Z,1509673784.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:44.699Z,1509673784.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:45.086Z,1509673785.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:45.122Z,1509673785.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:45.480Z,1509673785.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:45.495Z,1509673785.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:45.884Z,1509673785.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:45.921Z,1509673785.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:46.286Z,1509673786.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:46.317Z,1509673786.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:46.686Z,1509673786.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:46.701Z,1509673786.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:47.084Z,1509673787.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:47.099Z,1509673787.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:47.486Z,1509673787.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:47.500Z,1509673787.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:47.884Z,1509673787.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:47.923Z,1509673787.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:48.283Z,1509673788.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:48.303Z,1509673788.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:48.690Z,1509673788.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:48.705Z,1509673788.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:49.090Z,1509673789.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:49.105Z,1509673789.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:49.491Z,1509673789.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:49.511Z,1509673789.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:49.891Z,1509673789.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:49.905Z,1509673789.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:50.291Z,1509673790.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:50.311Z,1509673790.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:50.690Z,1509673790.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:50.711Z,1509673790.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:51.089Z,1509673791.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:51.103Z,1509673791.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:51.491Z,1509673791.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:51.567Z,1509673791.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:51.893Z,1509673791.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:51.908Z,1509673791.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:52.287Z,1509673792.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:52.339Z,1509673792.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:52.687Z,1509673792.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:52.702Z,1509673792.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:53.091Z,1509673793.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:53.147Z,1509673793.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:53.493Z,1509673793.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:53.540Z,1509673793.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:53.886Z,1509673793.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:53.901Z,1509673793.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:54.290Z,1509673794.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:54.305Z,1509673794.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:54.693Z,1509673794.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:54.707Z,1509673794.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:55.093Z,1509673795.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:55.108Z,1509673795.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:55.492Z,1509673795.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:55.506Z,1509673795.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:55.890Z,1509673795.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:55.905Z,1509673795.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:56.287Z,1509673796.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:56.302Z,1509673796.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:56.692Z,1509673796.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:56.715Z,1509673796.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:57.088Z,1509673797.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:57.102Z,1509673797.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:57.487Z,1509673797.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:57.502Z,1509673797.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:57.891Z,1509673797.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:57.907Z,1509673797.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:58.287Z,1509673798.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:58.302Z,1509673798.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:58.687Z,1509673798.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:58.702Z,1509673798.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:59.088Z,1509673799.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:59.104Z,1509673799.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:59.492Z,1509673799.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:59.507Z,1509673799.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:49:59.888Z,1509673799.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:49:59.903Z,1509673799.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:00.292Z,1509673800.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:00.307Z,1509673800.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:00.693Z,1509673800.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:00.715Z,1509673800.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:01.088Z,1509673801.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:01.103Z,1509673801.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:01.492Z,1509673801.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:01.515Z,1509673801.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:01.893Z,1509673801.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:01.908Z,1509673801.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:02.291Z,1509673802.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:02.307Z,1509673802.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:02.694Z,1509673802.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:02.709Z,1509673802.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:03.094Z,1509673803.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:03.109Z,1509673803.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:03.470Z,1509673803.470 [NAL9602](INFO): Powering up NAL9602
2017-11-03T01:50:03.500Z,1509673803.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:03.515Z,1509673803.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:03.891Z,1509673803.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:03.906Z,1509673803.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:04.293Z,1509673804.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:04.308Z,1509673804.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:04.693Z,1509673804.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:04.709Z,1509673804.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:05.090Z,1509673805.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:05.111Z,1509673805.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:05.485Z,1509673805.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:05.548Z,1509673805.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:05.876Z,1509673805.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:05.910Z,1509673805.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:06.291Z,1509673806.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:06.350Z,1509673806.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:06.694Z,1509673806.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:06.708Z,1509673806.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:07.087Z,1509673807.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:07.144Z,1509673807.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:07.491Z,1509673807.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:07.540Z,1509673807.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:07.894Z,1509673807.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:07.908Z,1509673807.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:08.291Z,1509673808.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:08.306Z,1509673808.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:08.688Z,1509673808.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:08.706Z,1509673808.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:09.090Z,1509673809.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:09.105Z,1509673809.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:09.493Z,1509673809.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:09.508Z,1509673809.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:09.894Z,1509673809.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:09.909Z,1509673809.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:10.288Z,1509673810.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:10.302Z,1509673810.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:10.688Z,1509673810.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:10.703Z,1509673810.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:11.095Z,1509673811.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:11.109Z,1509673811.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:11.487Z,1509673811.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:11.502Z,1509673811.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:11.890Z,1509673811.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:11.907Z,1509673811.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:12.293Z,1509673812.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:12.309Z,1509673812.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:12.679Z,1509673812.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:12.705Z,1509673812.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:13.079Z,1509673813.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:13.106Z,1509673813.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:13.491Z,1509673813.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:13.505Z,1509673813.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:13.893Z,1509673813.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:13.908Z,1509673813.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:14.296Z,1509673814.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:14.311Z,1509673814.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:14.666Z,1509673814.666 [NAL9602](INFO): NAL9602 initialized
2017-11-03T01:50:14.686Z,1509673814.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:14.712Z,1509673814.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:15.091Z,1509673815.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:15.110Z,1509673815.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:15.504Z,1509673815.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:15.519Z,1509673815.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:15.904Z,1509673815.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:15.919Z,1509673815.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:19.005Z,1509673819.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:19.020Z,1509673819.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:19.151Z,1509673819.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:19.196Z,1509673819.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:19.555Z,1509673819.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:19.599Z,1509673819.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:19.953Z,1509673819.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:19.988Z,1509673819.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:20.346Z,1509673820.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:20.369Z,1509673820.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:20.747Z,1509673820.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:20.763Z,1509673820.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:21.151Z,1509673821.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:21.200Z,1509673821.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:21.551Z,1509673821.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:21.566Z,1509673821.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:21.948Z,1509673821.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:22.007Z,1509673822.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:22.356Z,1509673822.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:22.406Z,1509673822.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:22.757Z,1509673822.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:22.773Z,1509673822.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:23.156Z,1509673823.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:23.171Z,1509673823.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:23.549Z,1509673823.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:23.564Z,1509673823.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:23.950Z,1509673823.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:23.971Z,1509673823.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:24.349Z,1509673824.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:24.364Z,1509673824.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:24.750Z,1509673824.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:24.765Z,1509673824.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:25.150Z,1509673825.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:25.177Z,1509673825.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:25.560Z,1509673825.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:25.575Z,1509673825.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:25.961Z,1509673825.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:25.976Z,1509673825.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:26.336Z,1509673826.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:26.366Z,1509673826.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:26.748Z,1509673826.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:26.766Z,1509673826.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:27.140Z,1509673827.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:27.165Z,1509673827.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:27.551Z,1509673827.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:27.566Z,1509673827.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:27.948Z,1509673827.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:27.966Z,1509673827.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:28.361Z,1509673828.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:28.376Z,1509673828.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:28.757Z,1509673828.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:28.772Z,1509673828.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:29.160Z,1509673829.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:29.175Z,1509673829.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:29.551Z,1509673829.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:29.570Z,1509673829.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:29.951Z,1509673829.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:29.966Z,1509673829.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:30.349Z,1509673830.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:30.365Z,1509673830.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:30.751Z,1509673830.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:30.770Z,1509673830.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:31.146Z,1509673831.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:31.178Z,1509673831.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:31.565Z,1509673831.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:31.580Z,1509673831.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:31.962Z,1509673831.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:31.977Z,1509673831.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:32.343Z,1509673832.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:32.368Z,1509673832.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:32.741Z,1509673832.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:32.770Z,1509673832.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:33.141Z,1509673833.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:33.170Z,1509673833.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:33.537Z,1509673833.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:33.569Z,1509673833.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:33.941Z,1509673833.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:33.969Z,1509673833.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:34.362Z,1509673834.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:34.442Z,1509673834.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:34.750Z,1509673834.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:34.781Z,1509673834.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:35.154Z,1509673835.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:35.222Z,1509673835.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:35.540Z,1509673835.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:35.555Z,1509673835.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:35.941Z,1509673835.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:35.987Z,1509673835.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:36.341Z,1509673836.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:36.387Z,1509673836.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:36.741Z,1509673836.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:36.755Z,1509673836.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:37.154Z,1509673837.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:37.183Z,1509673837.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:37.554Z,1509673837.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:37.584Z,1509673837.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:37.957Z,1509673837.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:37.982Z,1509673837.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:38.340Z,1509673838.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:38.363Z,1509673838.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:38.741Z,1509673838.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:38.756Z,1509673838.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:39.147Z,1509673839.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:39.186Z,1509673839.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:39.541Z,1509673839.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:39.556Z,1509673839.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:39.947Z,1509673839.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:39.983Z,1509673839.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:40.358Z,1509673840.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:40.387Z,1509673840.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:40.746Z,1509673840.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:40.782Z,1509673840.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:41.158Z,1509673841.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:41.187Z,1509673841.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:41.547Z,1509673841.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:41.586Z,1509673841.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:41.940Z,1509673841.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:41.963Z,1509673841.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:42.344Z,1509673842.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:42.359Z,1509673842.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:42.747Z,1509673842.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:42.763Z,1509673842.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:43.155Z,1509673843.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:43.186Z,1509673843.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:43.558Z,1509673843.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:43.588Z,1509673843.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:43.958Z,1509673843.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:43.989Z,1509673843.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:44.344Z,1509673844.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:44.367Z,1509673844.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:44.744Z,1509673844.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:44.760Z,1509673844.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:45.145Z,1509673845.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:45.160Z,1509673845.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:45.544Z,1509673845.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:45.559Z,1509673845.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:45.944Z,1509673845.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:45.959Z,1509673845.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:46.350Z,1509673846.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:46.365Z,1509673846.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:46.758Z,1509673846.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:46.786Z,1509673846.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:47.158Z,1509673847.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:47.189Z,1509673847.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:47.544Z,1509673847.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:47.559Z,1509673847.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:47.945Z,1509673847.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:47.961Z,1509673847.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:48.344Z,1509673848.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:48.422Z,1509673848.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:48.742Z,1509673848.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:48.763Z,1509673848.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:49.156Z,1509673849.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:49.203Z,1509673849.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:49.556Z,1509673849.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:49.571Z,1509673849.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:49.957Z,1509673849.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:50.003Z,1509673850.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:50.344Z,1509673850.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:50.402Z,1509673850.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:50.748Z,1509673850.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:50.779Z,1509673850.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:51.151Z,1509673851.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:51.166Z,1509673851.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:51.549Z,1509673851.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:51.573Z,1509673851.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:51.940Z,1509673851.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:51.978Z,1509673851.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:52.373Z,1509673852.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:52.420Z,1509673852.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:52.763Z,1509673852.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:52.791Z,1509673852.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:53.152Z,1509673853.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:53.194Z,1509673853.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:53.544Z,1509673853.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:53.583Z,1509673853.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:53.941Z,1509673853.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:53.971Z,1509673853.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:54.341Z,1509673854.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:54.370Z,1509673854.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:54.734Z,1509673854.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:54.767Z,1509673854.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:55.152Z,1509673855.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:55.192Z,1509673855.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:55.560Z,1509673855.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:55.598Z,1509673855.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:55.955Z,1509673855.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:56.026Z,1509673856.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:56.345Z,1509673856.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:56.390Z,1509673856.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:56.756Z,1509673856.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:56.798Z,1509673856.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:57.148Z,1509673857.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:57.207Z,1509673857.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:57.548Z,1509673857.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:57.568Z,1509673857.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:57.948Z,1509673857.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:57.968Z,1509673857.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:58.360Z,1509673858.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:58.374Z,1509673858.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:58.762Z,1509673858.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:58.787Z,1509673858.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:59.159Z,1509673859.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:59.183Z,1509673859.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:59.550Z,1509673859.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:59.586Z,1509673859.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:50:59.941Z,1509673859.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:50:59.969Z,1509673859.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:00.341Z,1509673860.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:00.357Z,1509673860.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:00.740Z,1509673860.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:00.755Z,1509673860.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:01.154Z,1509673861.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:01.169Z,1509673861.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:01.554Z,1509673861.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:01.569Z,1509673861.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:01.953Z,1509673861.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:01.994Z,1509673861.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:02.343Z,1509673862.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:02.382Z,1509673862.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:02.740Z,1509673862.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:02.756Z,1509673862.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:03.142Z,1509673863.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:03.157Z,1509673863.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:03.543Z,1509673863.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:03.591Z,1509673863.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:03.940Z,1509673863.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:03.955Z,1509673863.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:04.369Z,1509673864.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:04.414Z,1509673864.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:04.758Z,1509673864.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:04.803Z,1509673864.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:05.154Z,1509673865.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:05.169Z,1509673865.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:05.542Z,1509673865.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:05.557Z,1509673865.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:05.940Z,1509673865.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:05.956Z,1509673865.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:06.343Z,1509673866.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:06.359Z,1509673866.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:06.742Z,1509673866.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:06.757Z,1509673866.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:07.154Z,1509673867.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:07.169Z,1509673867.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:07.554Z,1509673867.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:07.569Z,1509673867.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:07.949Z,1509673867.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:07.964Z,1509673867.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:08.343Z,1509673868.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:08.363Z,1509673868.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:08.742Z,1509673868.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:08.763Z,1509673868.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:09.142Z,1509673869.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:09.157Z,1509673869.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:09.545Z,1509673869.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:09.568Z,1509673869.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:09.956Z,1509673869.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:09.991Z,1509673869.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:10.346Z,1509673870.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:10.386Z,1509673870.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:10.754Z,1509673870.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:10.775Z,1509673870.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:11.158Z,1509673871.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:11.185Z,1509673871.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:11.543Z,1509673871.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:11.558Z,1509673871.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:11.948Z,1509673871.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:11.963Z,1509673871.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:12.344Z,1509673872.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:12.359Z,1509673872.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:12.743Z,1509673872.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:12.758Z,1509673872.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:13.158Z,1509673873.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:13.189Z,1509673873.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:13.558Z,1509673873.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:13.591Z,1509673873.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:13.591Z,1509673873.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2017-11-03T01:51:13.591Z,1509673873.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:51:13.593Z,1509673873.593 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:13.593Z,1509673873.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2017-11-03T01:51:13.593Z,1509673873.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:51:13.595Z,1509673873.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:13.595Z,1509673873.595 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2017-11-03T01:51:13.595Z,1509673873.595 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:51:13.677Z,1509673873.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:51:13.677Z,1509673873.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:51:13.677Z,1509673873.677 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:51:13.952Z,1509673873.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:14.040Z,1509673874.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:51:14.040Z,1509673874.040 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2017-11-03T01:51:14.041Z,1509673874.041 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:51:14.041Z,1509673874.041 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2017-11-03T01:51:14.041Z,1509673874.041 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:51:14.042Z,1509673874.042 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2017-11-03T01:51:14.350Z,1509673874.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:14.369Z,1509673874.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:51:14.370Z,1509673874.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:51:14.370Z,1509673874.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:51:14.371Z,1509673874.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:51:14.371Z,1509673874.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:51:14.371Z,1509673874.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:51:14.372Z,1509673874.372 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:51:14.372Z,1509673874.372 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:51:14.373Z,1509673874.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:51:14.748Z,1509673874.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:14.763Z,1509673874.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:51:14.764Z,1509673874.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:15.151Z,1509673875.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:15.170Z,1509673875.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:51:15.171Z,1509673875.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:15.551Z,1509673875.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:15.566Z,1509673875.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:51:15.567Z,1509673875.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:15.943Z,1509673875.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:15.958Z,1509673875.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:51:15.959Z,1509673875.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:19.052Z,1509673879.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:19.142Z,1509673879.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:51:19.143Z,1509673879.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:19.292Z,1509673879.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:19.314Z,1509673879.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T01:51:19.315Z,1509673879.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:19.687Z,1509673879.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:19.706Z,1509673879.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T01:51:19.707Z,1509673879.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:20.079Z,1509673880.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:20.133Z,1509673880.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T01:51:20.134Z,1509673880.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:20.476Z,1509673880.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:20.491Z,1509673880.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T01:51:20.492Z,1509673880.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:20.878Z,1509673880.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:20.947Z,1509673880.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T01:51:20.948Z,1509673880.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:21.285Z,1509673881.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:21.332Z,1509673881.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T01:51:21.333Z,1509673881.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:21.687Z,1509673881.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:21.706Z,1509673881.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T01:51:21.707Z,1509673881.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:22.088Z,1509673882.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:22.102Z,1509673882.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T01:51:22.103Z,1509673882.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:22.479Z,1509673882.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:22.493Z,1509673882.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T01:51:22.494Z,1509673882.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:22.878Z,1509673882.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:22.893Z,1509673882.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T01:51:22.894Z,1509673882.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:23.276Z,1509673883.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:23.291Z,1509673883.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T01:51:23.292Z,1509673883.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:23.664Z,1509673883.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:23.687Z,1509673883.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T01:51:23.688Z,1509673883.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:24.087Z,1509673884.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:24.106Z,1509673884.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T01:51:24.107Z,1509673884.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:24.488Z,1509673884.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:24.506Z,1509673884.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T01:51:24.507Z,1509673884.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:24.885Z,1509673884.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:24.899Z,1509673884.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T01:51:24.900Z,1509673884.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:25.276Z,1509673885.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:25.291Z,1509673885.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T01:51:25.292Z,1509673885.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:25.675Z,1509673885.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:25.690Z,1509673885.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T01:51:25.691Z,1509673885.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:26.085Z,1509673886.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:26.099Z,1509673886.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T01:51:26.100Z,1509673886.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:26.487Z,1509673886.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:26.506Z,1509673886.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T01:51:26.507Z,1509673886.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:26.888Z,1509673886.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:26.910Z,1509673886.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T01:51:26.911Z,1509673886.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:27.273Z,1509673887.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:27.287Z,1509673887.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T01:51:27.288Z,1509673887.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:27.678Z,1509673887.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:27.692Z,1509673887.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T01:51:27.693Z,1509673887.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:28.076Z,1509673888.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:28.090Z,1509673888.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T01:51:28.091Z,1509673888.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:28.480Z,1509673888.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:28.494Z,1509673888.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T01:51:28.495Z,1509673888.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:28.867Z,1509673888.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:28.897Z,1509673888.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T01:51:28.898Z,1509673888.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:29.289Z,1509673889.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:29.304Z,1509673889.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T01:51:29.305Z,1509673889.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:29.693Z,1509673889.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:29.714Z,1509673889.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T01:51:29.715Z,1509673889.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:30.088Z,1509673890.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:30.103Z,1509673890.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T01:51:30.104Z,1509673890.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:30.471Z,1509673890.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:30.496Z,1509673890.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T01:51:30.497Z,1509673890.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:30.868Z,1509673890.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:30.893Z,1509673890.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T01:51:30.894Z,1509673890.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:31.270Z,1509673891.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:31.295Z,1509673891.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T01:51:31.297Z,1509673891.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:31.669Z,1509673891.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:31.695Z,1509673891.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T01:51:31.696Z,1509673891.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:32.090Z,1509673892.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:32.104Z,1509673892.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T01:51:32.105Z,1509673892.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:32.490Z,1509673892.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:32.504Z,1509673892.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T01:51:32.505Z,1509673892.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:32.890Z,1509673892.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:32.904Z,1509673892.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T01:51:32.905Z,1509673892.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:33.269Z,1509673893.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:33.322Z,1509673893.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T01:51:33.323Z,1509673893.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:33.669Z,1509673893.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:33.754Z,1509673893.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:34.087Z,1509673894.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:34.103Z,1509673894.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:34.486Z,1509673894.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:34.527Z,1509673894.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:34.889Z,1509673894.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:34.904Z,1509673894.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:35.269Z,1509673895.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:35.341Z,1509673895.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:35.670Z,1509673895.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:35.720Z,1509673895.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:36.089Z,1509673896.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:36.104Z,1509673896.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:36.493Z,1509673896.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:36.508Z,1509673896.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:36.890Z,1509673896.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:36.905Z,1509673896.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:37.273Z,1509673897.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:37.298Z,1509673897.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:37.669Z,1509673897.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:37.696Z,1509673897.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:38.089Z,1509673898.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:38.104Z,1509673898.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:38.494Z,1509673898.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:38.509Z,1509673898.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:38.890Z,1509673898.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:38.905Z,1509673898.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:39.265Z,1509673899.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:39.299Z,1509673899.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:39.389Z,1509673899.389 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T01:51:39.665Z,1509673899.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:39.695Z,1509673899.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:40.090Z,1509673900.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:40.105Z,1509673900.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:40.492Z,1509673900.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:40.506Z,1509673900.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:40.889Z,1509673900.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:40.904Z,1509673900.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:41.269Z,1509673901.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:41.303Z,1509673901.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:41.670Z,1509673901.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:41.702Z,1509673901.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:42.073Z,1509673902.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:42.099Z,1509673902.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:42.489Z,1509673902.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:42.511Z,1509673902.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:42.893Z,1509673902.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:42.909Z,1509673902.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:43.268Z,1509673903.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:43.299Z,1509673903.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:43.670Z,1509673903.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:43.705Z,1509673903.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:44.064Z,1509673904.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:44.079Z,1509673904.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:44.473Z,1509673904.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:44.504Z,1509673904.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:44.869Z,1509673904.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:44.885Z,1509673904.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:45.282Z,1509673905.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:45.308Z,1509673905.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:45.686Z,1509673905.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:45.719Z,1509673905.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:46.082Z,1509673906.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:46.106Z,1509673906.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:46.468Z,1509673906.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:46.484Z,1509673906.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:46.870Z,1509673906.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:46.886Z,1509673906.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:47.269Z,1509673907.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:47.313Z,1509673907.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:47.668Z,1509673907.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:47.755Z,1509673907.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:48.081Z,1509673908.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:48.111Z,1509673908.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:48.485Z,1509673908.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:48.542Z,1509673908.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:48.885Z,1509673908.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:48.910Z,1509673908.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:49.267Z,1509673909.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:49.319Z,1509673909.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:49.674Z,1509673909.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:49.727Z,1509673909.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:50.071Z,1509673910.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:50.086Z,1509673910.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:50.472Z,1509673910.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:50.487Z,1509673910.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:50.872Z,1509673910.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:50.887Z,1509673910.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:51.281Z,1509673911.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:51.312Z,1509673911.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:51.689Z,1509673911.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:51.719Z,1509673911.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:52.085Z,1509673912.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:52.109Z,1509673912.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:52.472Z,1509673912.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:52.491Z,1509673912.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:52.867Z,1509673912.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:52.887Z,1509673912.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:53.273Z,1509673913.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:53.289Z,1509673913.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:53.675Z,1509673913.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:53.689Z,1509673913.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:54.081Z,1509673914.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:54.112Z,1509673914.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:54.485Z,1509673914.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:54.510Z,1509673914.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:54.884Z,1509673914.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:54.919Z,1509673914.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:55.271Z,1509673915.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:55.286Z,1509673915.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:55.674Z,1509673915.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:55.711Z,1509673915.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:56.071Z,1509673916.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:56.085Z,1509673916.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:56.476Z,1509673916.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:56.491Z,1509673916.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:56.875Z,1509673916.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:56.914Z,1509673916.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:57.285Z,1509673917.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:57.310Z,1509673917.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:57.681Z,1509673917.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:57.711Z,1509673917.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:58.086Z,1509673918.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:58.109Z,1509673918.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:58.471Z,1509673918.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:58.486Z,1509673918.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:58.875Z,1509673918.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:58.904Z,1509673918.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:59.269Z,1509673919.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:59.291Z,1509673919.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:51:59.676Z,1509673919.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:51:59.691Z,1509673919.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:00.084Z,1509673920.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:00.099Z,1509673920.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:00.483Z,1509673920.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:00.503Z,1509673920.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:00.884Z,1509673920.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:00.906Z,1509673920.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:01.278Z,1509673921.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:01.299Z,1509673921.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:01.678Z,1509673921.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:01.762Z,1509673921.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:02.080Z,1509673922.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:02.095Z,1509673922.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:02.479Z,1509673922.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:02.538Z,1509673922.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:02.878Z,1509673922.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:02.899Z,1509673922.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:03.289Z,1509673923.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:03.335Z,1509673923.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:03.691Z,1509673923.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:03.742Z,1509673923.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:04.088Z,1509673924.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:04.106Z,1509673924.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:04.478Z,1509673924.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:04.493Z,1509673924.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:04.877Z,1509673924.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:04.892Z,1509673924.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:05.277Z,1509673925.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:05.292Z,1509673925.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:05.664Z,1509673925.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:05.690Z,1509673925.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:06.088Z,1509673926.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:06.103Z,1509673926.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:06.489Z,1509673926.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:06.503Z,1509673926.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:06.889Z,1509673926.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:06.910Z,1509673926.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:07.279Z,1509673927.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:07.295Z,1509673927.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:07.677Z,1509673927.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:07.696Z,1509673927.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:08.085Z,1509673928.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:08.100Z,1509673928.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:08.489Z,1509673928.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:08.504Z,1509673928.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:08.889Z,1509673928.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:08.904Z,1509673928.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:09.280Z,1509673929.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:09.295Z,1509673929.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:09.665Z,1509673929.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:09.691Z,1509673929.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:10.085Z,1509673930.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:10.100Z,1509673930.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:10.485Z,1509673930.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:10.500Z,1509673930.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:10.889Z,1509673930.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:10.904Z,1509673930.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:11.278Z,1509673931.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:11.293Z,1509673931.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:11.679Z,1509673931.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:11.698Z,1509673931.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:12.088Z,1509673932.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:12.111Z,1509673932.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:12.489Z,1509673932.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:12.504Z,1509673932.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:12.890Z,1509673932.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:12.905Z,1509673932.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:13.281Z,1509673933.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:13.297Z,1509673933.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:13.668Z,1509673933.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:13.695Z,1509673933.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:14.090Z,1509673934.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:14.110Z,1509673934.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:14.490Z,1509673934.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:14.505Z,1509673934.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:14.889Z,1509673934.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:14.904Z,1509673934.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:15.268Z,1509673935.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:15.294Z,1509673935.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:15.681Z,1509673935.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:15.739Z,1509673935.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:16.089Z,1509673936.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:16.158Z,1509673936.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:19.161Z,1509673939.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:19.176Z,1509673939.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:19.352Z,1509673939.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:19.367Z,1509673939.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:19.725Z,1509673939.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:19.789Z,1509673939.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:20.124Z,1509673940.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:20.150Z,1509673940.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:20.525Z,1509673940.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:20.589Z,1509673940.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:20.928Z,1509673940.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:20.994Z,1509673940.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:21.346Z,1509673941.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:21.361Z,1509673941.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:21.750Z,1509673941.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:21.765Z,1509673941.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:22.146Z,1509673942.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:22.167Z,1509673942.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:22.521Z,1509673942.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:22.548Z,1509673942.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:22.927Z,1509673942.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:22.962Z,1509673942.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:23.326Z,1509673943.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:23.352Z,1509673943.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:23.725Z,1509673943.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:23.758Z,1509673943.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:24.142Z,1509673944.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:24.157Z,1509673944.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:24.546Z,1509673944.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:24.561Z,1509673944.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:24.942Z,1509673944.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:24.957Z,1509673944.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:25.317Z,1509673945.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:25.344Z,1509673945.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:25.725Z,1509673945.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:25.753Z,1509673945.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:26.125Z,1509673946.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:26.154Z,1509673946.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:26.528Z,1509673946.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:26.554Z,1509673946.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:26.926Z,1509673946.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:26.951Z,1509673946.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:27.338Z,1509673947.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:27.367Z,1509673947.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:27.742Z,1509673947.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:27.757Z,1509673947.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:28.146Z,1509673948.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:28.161Z,1509673948.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:28.526Z,1509673948.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:28.552Z,1509673948.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:28.929Z,1509673948.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:28.955Z,1509673948.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:29.326Z,1509673949.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:29.353Z,1509673949.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:29.727Z,1509673949.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:29.755Z,1509673949.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:30.146Z,1509673950.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:30.161Z,1509673950.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:30.545Z,1509673950.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:30.567Z,1509673950.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:30.945Z,1509673950.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:30.966Z,1509673950.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:31.327Z,1509673951.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:31.353Z,1509673951.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:31.725Z,1509673951.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:31.755Z,1509673951.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:32.127Z,1509673952.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:32.153Z,1509673952.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:32.526Z,1509673952.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:32.551Z,1509673952.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:32.923Z,1509673952.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:32.000Z,1509673953.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:33.345Z,1509673953.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:33.360Z,1509673953.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:33.749Z,1509673953.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:33.764Z,1509673953.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:34.145Z,1509673954.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:34.200Z,1509673954.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:34.521Z,1509673954.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:34.555Z,1509673954.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:34.921Z,1509673954.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:34.966Z,1509673954.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:35.325Z,1509673955.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:35.383Z,1509673955.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:35.725Z,1509673955.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:35.758Z,1509673955.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:36.142Z,1509673956.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:36.163Z,1509673956.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:36.543Z,1509673956.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:36.562Z,1509673956.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:36.942Z,1509673956.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:36.957Z,1509673956.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:37.327Z,1509673957.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:37.352Z,1509673957.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:37.725Z,1509673957.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:37.755Z,1509673957.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:38.125Z,1509673958.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:38.158Z,1509673958.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:38.524Z,1509673958.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:38.554Z,1509673958.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:38.925Z,1509673958.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:38.952Z,1509673958.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:39.345Z,1509673959.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:39.360Z,1509673959.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:39.730Z,1509673959.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:39.755Z,1509673959.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:40.145Z,1509673960.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:40.160Z,1509673960.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:40.525Z,1509673960.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:40.558Z,1509673960.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:40.921Z,1509673960.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:40.936Z,1509673960.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:41.325Z,1509673961.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:41.357Z,1509673961.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:41.725Z,1509673961.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:41.762Z,1509673961.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:42.134Z,1509673962.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:42.160Z,1509673962.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:42.537Z,1509673962.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:42.571Z,1509673962.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:42.937Z,1509673962.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:42.963Z,1509673962.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:43.327Z,1509673963.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:43.361Z,1509673963.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:43.725Z,1509673963.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:43.740Z,1509673963.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:44.127Z,1509673964.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:44.161Z,1509673964.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:44.525Z,1509673964.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:44.540Z,1509673964.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:44.927Z,1509673964.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:44.958Z,1509673964.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:45.338Z,1509673965.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:45.367Z,1509673965.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:45.737Z,1509673965.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:45.767Z,1509673965.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:46.137Z,1509673966.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:46.167Z,1509673966.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:46.527Z,1509673966.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:46.560Z,1509673966.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:46.924Z,1509673966.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:46.939Z,1509673966.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:47.328Z,1509673967.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:47.422Z,1509673967.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:47.725Z,1509673967.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:47.740Z,1509673967.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:48.134Z,1509673968.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:48.164Z,1509673968.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:48.537Z,1509673968.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:48.594Z,1509673968.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:48.937Z,1509673968.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:48.962Z,1509673968.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:49.324Z,1509673969.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:49.383Z,1509673969.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:49.731Z,1509673969.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:49.783Z,1509673969.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:50.131Z,1509673970.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:50.162Z,1509673970.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:50.525Z,1509673970.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:50.540Z,1509673970.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:50.924Z,1509673970.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:50.939Z,1509673970.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:51.341Z,1509673971.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:51.366Z,1509673971.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:51.737Z,1509673971.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:51.769Z,1509673971.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:52.137Z,1509673972.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:52.168Z,1509673972.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:52.525Z,1509673972.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:52.540Z,1509673972.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:52.924Z,1509673972.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:52.939Z,1509673972.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:53.326Z,1509673973.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:53.341Z,1509673973.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:53.727Z,1509673973.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:53.747Z,1509673973.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:54.141Z,1509673974.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:54.166Z,1509673974.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:54.541Z,1509673974.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:54.571Z,1509673974.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:54.941Z,1509673974.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:54.967Z,1509673974.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:55.325Z,1509673975.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:55.340Z,1509673975.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:55.730Z,1509673975.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:55.745Z,1509673975.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:56.129Z,1509673976.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:56.144Z,1509673976.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:56.533Z,1509673976.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:56.548Z,1509673976.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:56.930Z,1509673976.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:56.951Z,1509673976.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:57.342Z,1509673977.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:57.373Z,1509673977.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:57.738Z,1509673977.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:57.772Z,1509673977.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:58.142Z,1509673978.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:58.173Z,1509673978.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:58.529Z,1509673978.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:58.544Z,1509673978.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:58.931Z,1509673978.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:58.947Z,1509673978.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:59.331Z,1509673979.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:59.346Z,1509673979.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:52:59.725Z,1509673979.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:52:59.740Z,1509673979.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:00.146Z,1509673980.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:00.169Z,1509673980.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:00.542Z,1509673980.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:00.574Z,1509673980.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:00.942Z,1509673980.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:00.973Z,1509673980.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:01.332Z,1509673981.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:01.347Z,1509673981.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:01.729Z,1509673981.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:01.806Z,1509673981.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:02.136Z,1509673982.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:02.151Z,1509673982.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:02.535Z,1509673982.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:02.583Z,1509673982.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:02.933Z,1509673982.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:02.949Z,1509673982.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:03.338Z,1509673983.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:03.390Z,1509673983.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:03.741Z,1509673983.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:03.757Z,1509673983.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:04.145Z,1509673984.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:04.206Z,1509673984.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:04.527Z,1509673984.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:04.553Z,1509673984.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:04.927Z,1509673984.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:04.953Z,1509673984.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:05.326Z,1509673985.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:05.352Z,1509673985.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:05.728Z,1509673985.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:05.754Z,1509673985.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:06.138Z,1509673986.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:06.160Z,1509673986.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:06.543Z,1509673986.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:06.563Z,1509673986.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:06.943Z,1509673986.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:06.958Z,1509673986.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:07.321Z,1509673987.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:07.353Z,1509673987.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:07.725Z,1509673987.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:07.761Z,1509673987.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:08.121Z,1509673988.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:08.136Z,1509673988.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:08.528Z,1509673988.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:08.560Z,1509673988.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:08.925Z,1509673988.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:08.940Z,1509673988.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:09.337Z,1509673989.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:09.366Z,1509673989.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:09.742Z,1509673989.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:09.769Z,1509673989.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:10.137Z,1509673990.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:10.164Z,1509673990.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:10.525Z,1509673990.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:10.539Z,1509673990.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:10.927Z,1509673990.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:10.967Z,1509673990.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:11.326Z,1509673991.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:11.341Z,1509673991.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:11.724Z,1509673991.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:11.738Z,1509673991.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:12.137Z,1509673992.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:12.169Z,1509673992.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:12.537Z,1509673992.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:12.568Z,1509673992.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:12.937Z,1509673992.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:12.952Z,1509673992.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:13.331Z,1509673993.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:13.346Z,1509673993.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:13.728Z,1509673993.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:13.751Z,1509673993.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:14.124Z,1509673994.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:14.138Z,1509673994.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:14.529Z,1509673994.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:14.544Z,1509673994.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:14.931Z,1509673994.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:14.946Z,1509673994.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:15.341Z,1509673995.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:15.373Z,1509673995.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:15.738Z,1509673995.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:15.769Z,1509673995.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:15.772Z,1509673995.772 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T01:48:15.7Z
2017-11-03T01:53:15.773Z,1509673995.773 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T01:53:15.773Z,1509673995.773 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T01:53:16.142Z,1509673996.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:16.215Z,1509673996.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:19.327Z,1509673999.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:19.342Z,1509673999.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:19.453Z,1509673999.453 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0040.lzma
2017-11-03T01:53:19.491Z,1509673999.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:19.534Z,1509673999.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:19.892Z,1509673999.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:19.946Z,1509673999.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:20.251Z,1509674000.251 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0040.lzma.bak
2017-11-03T01:53:20.251Z,1509674000.251 [DataOverHttps](INFO): SBD MOMSN=5182425
2017-11-03T01:53:20.325Z,1509674000.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:20.341Z,1509674000.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:20.889Z,1509674000.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:20.946Z,1509674000.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:21.090Z,1509674001.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:21.133Z,1509674001.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:24.175Z,1509674004.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:24.215Z,1509674004.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:24.356Z,1509674004.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:24.391Z,1509674004.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:24.766Z,1509674004.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:24.795Z,1509674004.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:25.181Z,1509674005.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:25.196Z,1509674005.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:25.576Z,1509674005.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:25.599Z,1509674005.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:25.951Z,1509674005.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:25.967Z,1509674005.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:29.044Z,1509674009.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:29.059Z,1509674009.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:29.189Z,1509674009.189 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20171103T001125/Express0041.lzma
2017-11-03T01:53:29.211Z,1509674009.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:29.242Z,1509674009.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:29.614Z,1509674009.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:29.645Z,1509674009.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:36.185Z,1509674016.185 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0041.lzma.bak
2017-11-03T01:53:36.185Z,1509674016.185 [DataOverHttps](INFO): SBD MOMSN=5182427
2017-11-03T01:53:36.222Z,1509674016.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:36.307Z,1509674016.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:36.654Z,1509674016.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:36.669Z,1509674016.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:36.673Z,1509674016.673 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T01:53:36.673Z,1509674016.673 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T01:53:36.673Z,1509674016.673 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T01:53:36.837Z,1509674016.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:36.863Z,1509674016.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:39.921Z,1509674019.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:39.963Z,1509674019.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:40.092Z,1509674020.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:40.124Z,1509674020.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:40.513Z,1509674020.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:40.570Z,1509674020.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:40.913Z,1509674020.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:40.970Z,1509674020.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:41.313Z,1509674021.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:41.335Z,1509674021.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:41.693Z,1509674021.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:41.719Z,1509674021.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:42.094Z,1509674022.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:42.120Z,1509674022.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:42.496Z,1509674022.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:42.522Z,1509674022.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:42.895Z,1509674022.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:42.923Z,1509674022.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:43.307Z,1509674023.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:43.329Z,1509674023.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:43.709Z,1509674023.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:43.725Z,1509674023.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:44.113Z,1509674024.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:44.135Z,1509674024.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:44.493Z,1509674024.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:44.519Z,1509674024.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:44.889Z,1509674024.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:44.916Z,1509674024.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:45.295Z,1509674025.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:45.321Z,1509674025.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:45.693Z,1509674025.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:45.720Z,1509674025.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:46.113Z,1509674026.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:46.135Z,1509674026.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:46.517Z,1509674026.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:46.532Z,1509674026.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:46.910Z,1509674026.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:46.930Z,1509674026.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:47.295Z,1509674027.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:47.320Z,1509674027.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:47.693Z,1509674027.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:47.724Z,1509674027.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:48.095Z,1509674028.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:48.127Z,1509674028.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:48.489Z,1509674028.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:48.517Z,1509674028.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:48.893Z,1509674028.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:48.908Z,1509674028.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:49.305Z,1509674029.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:49.338Z,1509674029.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:49.706Z,1509674029.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:49.735Z,1509674029.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:50.105Z,1509674030.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:50.135Z,1509674030.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:50.492Z,1509674030.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:50.507Z,1509674030.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:50.895Z,1509674030.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:50.926Z,1509674030.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:51.296Z,1509674031.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:51.319Z,1509674031.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:51.699Z,1509674031.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:51.728Z,1509674031.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:52.106Z,1509674032.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:52.139Z,1509674032.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:52.514Z,1509674032.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:52.535Z,1509674032.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:52.905Z,1509674032.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:52.958Z,1509674032.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:53.299Z,1509674033.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:53.352Z,1509674033.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:53.691Z,1509674033.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:53.707Z,1509674033.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:54.099Z,1509674034.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:54.147Z,1509674034.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:54.491Z,1509674034.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:54.511Z,1509674034.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:54.891Z,1509674034.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:54.947Z,1509674034.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:55.305Z,1509674035.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:55.355Z,1509674035.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:55.706Z,1509674035.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:55.730Z,1509674035.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:56.106Z,1509674036.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:56.130Z,1509674036.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:56.491Z,1509674036.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:56.506Z,1509674036.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:56.893Z,1509674036.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:56.908Z,1509674036.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:57.292Z,1509674037.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:57.307Z,1509674037.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:57.691Z,1509674037.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:57.706Z,1509674037.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:58.106Z,1509674038.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:58.135Z,1509674038.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:58.505Z,1509674038.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:58.535Z,1509674038.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:58.905Z,1509674038.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:58.938Z,1509674038.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:59.292Z,1509674039.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:59.307Z,1509674039.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:53:59.691Z,1509674039.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:53:59.706Z,1509674039.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:00.091Z,1509674040.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:00.106Z,1509674040.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:00.492Z,1509674040.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:00.507Z,1509674040.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:00.891Z,1509674040.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:00.906Z,1509674040.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:01.305Z,1509674041.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:01.331Z,1509674041.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:01.706Z,1509674041.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:01.730Z,1509674041.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:02.105Z,1509674042.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:02.130Z,1509674042.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:02.492Z,1509674042.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:02.535Z,1509674042.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:02.892Z,1509674042.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:02.907Z,1509674042.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:03.300Z,1509674043.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:03.334Z,1509674043.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:03.692Z,1509674043.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:03.706Z,1509674043.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:04.110Z,1509674044.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:04.139Z,1509674044.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:04.520Z,1509674044.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:04.535Z,1509674044.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:04.905Z,1509674044.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:04.930Z,1509674044.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:05.292Z,1509674045.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:05.307Z,1509674045.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:05.699Z,1509674045.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:05.732Z,1509674045.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:06.092Z,1509674046.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:06.107Z,1509674046.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:06.493Z,1509674046.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:06.508Z,1509674046.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:06.893Z,1509674046.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:06.909Z,1509674046.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:07.305Z,1509674047.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:07.351Z,1509674047.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:07.706Z,1509674047.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:07.741Z,1509674047.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:08.106Z,1509674048.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:08.141Z,1509674048.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:08.491Z,1509674048.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:08.506Z,1509674048.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:08.892Z,1509674048.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:08.907Z,1509674048.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:09.292Z,1509674049.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:09.308Z,1509674049.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:09.699Z,1509674049.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:09.714Z,1509674049.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:10.106Z,1509674050.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:10.123Z,1509674050.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:10.506Z,1509674050.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:10.514Z,1509674050.514 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:54:10.514Z,1509674050.514 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:54:10.514Z,1509674050.514 [BPC1](ERROR): Communications Fault
2017-11-03T01:54:10.523Z,1509674050.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:10.613Z,1509674050.613 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:54:10.905Z,1509674050.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:10.921Z,1509674050.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:11.295Z,1509674051.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:11.315Z,1509674051.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:11.692Z,1509674051.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:11.707Z,1509674051.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:11.797Z,1509674051.797 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:54:11.797Z,1509674051.797 [BPC1] No Fault, FailCount= 1
2017-11-03T01:54:12.088Z,1509674052.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:12.147Z,1509674052.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:12.493Z,1509674052.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:12.509Z,1509674052.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:12.901Z,1509674052.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:12.917Z,1509674052.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:13.305Z,1509674053.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:13.321Z,1509674053.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:13.706Z,1509674053.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:13.791Z,1509674053.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:14.105Z,1509674054.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:14.121Z,1509674054.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:14.492Z,1509674054.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:14.507Z,1509674054.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:14.507Z,1509674054.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2017-11-03T01:54:14.507Z,1509674054.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:54:14.509Z,1509674054.509 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:14.509Z,1509674054.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2017-11-03T01:54:14.509Z,1509674054.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:54:14.511Z,1509674054.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:14.511Z,1509674054.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2017-11-03T01:54:14.511Z,1509674054.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:54:14.596Z,1509674054.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:54:14.597Z,1509674054.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:54:14.597Z,1509674054.597 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:54:14.895Z,1509674054.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:15.000Z,1509674055.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:54:15.000Z,1509674055.000 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2017-11-03T01:54:15.001Z,1509674055.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:54:15.001Z,1509674055.001 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2017-11-03T01:54:15.001Z,1509674055.001 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:54:15.001Z,1509674055.001 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2017-11-03T01:54:15.294Z,1509674055.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:15.308Z,1509674055.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:54:15.308Z,1509674055.308 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:54:15.309Z,1509674055.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:54:15.309Z,1509674055.309 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:54:15.309Z,1509674055.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:54:15.310Z,1509674055.310 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:54:15.310Z,1509674055.310 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:54:15.310Z,1509674055.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:54:15.311Z,1509674055.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:54:15.691Z,1509674055.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:15.710Z,1509674055.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:54:15.711Z,1509674055.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:16.106Z,1509674056.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:16.121Z,1509674056.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:54:16.122Z,1509674056.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:16.514Z,1509674056.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:16.542Z,1509674056.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T01:54:16.543Z,1509674056.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:16.907Z,1509674056.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:16.934Z,1509674056.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T01:54:16.935Z,1509674056.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:17.291Z,1509674057.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:17.314Z,1509674057.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T01:54:17.315Z,1509674057.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:17.696Z,1509674057.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:17.727Z,1509674057.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T01:54:17.728Z,1509674057.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:18.093Z,1509674058.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:18.107Z,1509674058.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T01:54:18.108Z,1509674058.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:18.494Z,1509674058.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:18.509Z,1509674058.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T01:54:18.510Z,1509674058.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:18.892Z,1509674058.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:18.908Z,1509674058.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T01:54:18.910Z,1509674058.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:19.306Z,1509674059.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:19.337Z,1509674059.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:54:19.338Z,1509674059.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:19.706Z,1509674059.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:19.737Z,1509674059.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T01:54:19.738Z,1509674059.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:20.105Z,1509674060.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:20.141Z,1509674060.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T01:54:20.142Z,1509674060.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:20.492Z,1509674060.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:20.506Z,1509674060.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T01:54:20.507Z,1509674060.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:20.891Z,1509674060.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:20.910Z,1509674060.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T01:54:20.911Z,1509674060.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:21.292Z,1509674061.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:21.307Z,1509674061.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T01:54:21.308Z,1509674061.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:21.691Z,1509674061.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:21.706Z,1509674061.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T01:54:21.706Z,1509674061.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:22.106Z,1509674062.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:22.138Z,1509674062.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T01:54:22.139Z,1509674062.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:22.505Z,1509674062.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:22.536Z,1509674062.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T01:54:22.537Z,1509674062.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:22.909Z,1509674062.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:22.941Z,1509674062.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T01:54:22.942Z,1509674062.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:23.291Z,1509674063.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:23.306Z,1509674063.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T01:54:23.307Z,1509674063.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:23.699Z,1509674063.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:23.719Z,1509674063.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T01:54:23.720Z,1509674063.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:24.095Z,1509674064.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:24.110Z,1509674064.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T01:54:24.111Z,1509674064.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:24.497Z,1509674064.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:24.511Z,1509674064.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T01:54:24.512Z,1509674064.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:24.895Z,1509674064.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:24.954Z,1509674064.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T01:54:24.954Z,1509674064.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:25.305Z,1509674065.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:25.320Z,1509674065.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T01:54:25.321Z,1509674065.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:25.710Z,1509674065.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:25.725Z,1509674065.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T01:54:25.726Z,1509674065.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:26.106Z,1509674066.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:26.162Z,1509674066.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T01:54:26.163Z,1509674066.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:26.502Z,1509674066.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:26.516Z,1509674066.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T01:54:26.517Z,1509674066.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:26.896Z,1509674066.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:26.950Z,1509674066.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T01:54:26.951Z,1509674066.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:27.302Z,1509674067.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:27.350Z,1509674067.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T01:54:27.351Z,1509674067.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:27.700Z,1509674067.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:27.715Z,1509674067.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T01:54:27.716Z,1509674067.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:28.106Z,1509674068.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:28.121Z,1509674068.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T01:54:28.122Z,1509674068.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:28.505Z,1509674068.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:28.521Z,1509674068.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T01:54:28.522Z,1509674068.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:28.905Z,1509674068.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:28.920Z,1509674068.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T01:54:28.921Z,1509674068.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:29.295Z,1509674069.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:29.310Z,1509674069.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T01:54:29.311Z,1509674069.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:29.702Z,1509674069.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:29.717Z,1509674069.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T01:54:29.718Z,1509674069.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:30.102Z,1509674070.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:30.116Z,1509674070.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T01:54:30.117Z,1509674070.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:30.502Z,1509674070.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:30.517Z,1509674070.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T01:54:30.518Z,1509674070.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:30.900Z,1509674070.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:30.914Z,1509674070.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T01:54:30.915Z,1509674070.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:31.305Z,1509674071.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:31.320Z,1509674071.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T01:54:31.321Z,1509674071.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:31.703Z,1509674071.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:31.723Z,1509674071.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T01:54:31.724Z,1509674071.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:32.105Z,1509674072.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:32.121Z,1509674072.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T01:54:32.122Z,1509674072.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:32.502Z,1509674072.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:32.517Z,1509674072.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T01:54:32.518Z,1509674072.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:32.896Z,1509674072.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:32.910Z,1509674072.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T01:54:32.911Z,1509674072.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:33.300Z,1509674073.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:33.315Z,1509674073.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T01:54:33.316Z,1509674073.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:33.696Z,1509674073.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:33.710Z,1509674073.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T01:54:33.711Z,1509674073.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:34.106Z,1509674074.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:34.121Z,1509674074.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T01:54:34.122Z,1509674074.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:34.509Z,1509674074.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:34.525Z,1509674074.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:34.905Z,1509674074.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:34.923Z,1509674074.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:35.302Z,1509674075.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:35.318Z,1509674075.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:35.700Z,1509674075.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:35.715Z,1509674075.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:36.102Z,1509674076.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:36.117Z,1509674076.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:36.502Z,1509674076.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:36.518Z,1509674076.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:36.898Z,1509674076.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:36.919Z,1509674076.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:37.305Z,1509674077.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:37.321Z,1509674077.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:40.542Z,1509674080.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:40.614Z,1509674080.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:40.766Z,1509674080.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:40.806Z,1509674080.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:41.154Z,1509674081.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:41.168Z,1509674081.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:41.553Z,1509674081.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:41.606Z,1509674081.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:41.949Z,1509674081.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:41.965Z,1509674081.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:42.361Z,1509674082.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:42.401Z,1509674082.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:42.757Z,1509674082.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:42.779Z,1509674082.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:43.160Z,1509674083.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:43.207Z,1509674083.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:43.536Z,1509674083.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:43.562Z,1509674083.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:43.950Z,1509674083.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:43.967Z,1509674083.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:44.351Z,1509674084.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:44.367Z,1509674084.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:44.750Z,1509674084.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:44.771Z,1509674084.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:45.159Z,1509674085.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:45.179Z,1509674085.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:45.560Z,1509674085.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:45.579Z,1509674085.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:45.960Z,1509674085.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:45.975Z,1509674085.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:46.344Z,1509674086.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:46.360Z,1509674086.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:46.748Z,1509674086.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:46.763Z,1509674086.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:47.150Z,1509674087.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:47.165Z,1509674087.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:47.545Z,1509674087.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:47.560Z,1509674087.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:47.950Z,1509674087.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:47.971Z,1509674087.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:48.360Z,1509674088.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:48.375Z,1509674088.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:48.757Z,1509674088.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:48.771Z,1509674088.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:49.160Z,1509674089.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:49.183Z,1509674089.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:49.548Z,1509674089.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:49.570Z,1509674089.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:49.944Z,1509674089.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:49.960Z,1509674089.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:50.351Z,1509674090.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:50.366Z,1509674090.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:50.750Z,1509674090.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:50.764Z,1509674090.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:51.160Z,1509674091.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:51.175Z,1509674091.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:51.559Z,1509674091.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:51.579Z,1509674091.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:51.960Z,1509674091.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:51.982Z,1509674091.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:52.350Z,1509674092.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:52.371Z,1509674092.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:52.750Z,1509674092.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:52.771Z,1509674092.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:53.150Z,1509674093.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:53.165Z,1509674093.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:53.551Z,1509674093.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:53.620Z,1509674093.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:53.947Z,1509674093.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:53.963Z,1509674093.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:54.360Z,1509674094.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:54.382Z,1509674094.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:54.759Z,1509674094.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:54.779Z,1509674094.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:55.160Z,1509674095.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:55.227Z,1509674095.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:55.550Z,1509674095.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:55.565Z,1509674095.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:55.950Z,1509674095.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:55.965Z,1509674095.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:56.349Z,1509674096.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:56.402Z,1509674096.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:56.751Z,1509674096.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:56.771Z,1509674096.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:57.157Z,1509674097.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:57.211Z,1509674097.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:57.560Z,1509674097.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:57.575Z,1509674097.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:57.955Z,1509674097.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:57.997Z,1509674097.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:58.332Z,1509674098.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:58.365Z,1509674098.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:58.740Z,1509674098.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:58.764Z,1509674098.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:59.139Z,1509674099.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:59.171Z,1509674099.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:59.543Z,1509674099.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:59.569Z,1509674099.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:54:59.940Z,1509674099.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:54:59.973Z,1509674099.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:00.361Z,1509674100.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:00.375Z,1509674100.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:00.756Z,1509674100.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:00.771Z,1509674100.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:01.161Z,1509674101.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:01.176Z,1509674101.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:01.540Z,1509674101.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:01.570Z,1509674101.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:01.943Z,1509674101.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:01.967Z,1509674101.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:02.341Z,1509674102.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:02.366Z,1509674102.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:02.736Z,1509674102.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:02.765Z,1509674102.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:03.155Z,1509674103.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:03.175Z,1509674103.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:03.561Z,1509674103.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:03.575Z,1509674103.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:03.959Z,1509674103.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:03.983Z,1509674103.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:04.343Z,1509674104.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:04.368Z,1509674104.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:04.758Z,1509674104.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:04.779Z,1509674104.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:05.136Z,1509674105.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:05.170Z,1509674105.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:05.543Z,1509674105.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:05.569Z,1509674105.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:05.943Z,1509674105.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:05.968Z,1509674105.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:06.361Z,1509674106.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:06.376Z,1509674106.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:06.765Z,1509674106.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:06.780Z,1509674106.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:07.161Z,1509674107.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:07.176Z,1509674107.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:07.543Z,1509674107.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:07.568Z,1509674107.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:07.943Z,1509674107.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:07.968Z,1509674107.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:08.341Z,1509674108.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:08.367Z,1509674108.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:08.740Z,1509674108.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:08.783Z,1509674108.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:09.161Z,1509674109.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:09.176Z,1509674109.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:09.561Z,1509674109.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:09.576Z,1509674109.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:09.958Z,1509674109.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:09.991Z,1509674109.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:10.337Z,1509674110.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:10.368Z,1509674110.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:10.741Z,1509674110.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:10.774Z,1509674110.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:11.143Z,1509674111.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:11.187Z,1509674111.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:11.544Z,1509674111.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:11.573Z,1509674111.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:11.940Z,1509674111.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:11.987Z,1509674111.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:12.350Z,1509674112.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:12.403Z,1509674112.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:12.765Z,1509674112.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:12.779Z,1509674112.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:13.161Z,1509674113.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:13.176Z,1509674113.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:13.541Z,1509674113.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:13.576Z,1509674113.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:13.943Z,1509674113.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:13.974Z,1509674113.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:14.341Z,1509674114.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:14.377Z,1509674114.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:14.736Z,1509674114.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:14.751Z,1509674114.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:15.150Z,1509674115.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:15.174Z,1509674115.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:15.553Z,1509674115.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:15.583Z,1509674115.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:15.953Z,1509674115.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:15.979Z,1509674115.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:16.341Z,1509674116.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:16.356Z,1509674116.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:16.738Z,1509674116.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:16.753Z,1509674116.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:17.141Z,1509674117.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:17.155Z,1509674117.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:17.542Z,1509674117.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:17.557Z,1509674117.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:17.940Z,1509674117.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:17.955Z,1509674117.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:18.354Z,1509674118.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:18.385Z,1509674118.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:18.755Z,1509674118.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:18.785Z,1509674118.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:19.155Z,1509674119.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:19.184Z,1509674119.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:19.539Z,1509674119.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:19.555Z,1509674119.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:19.943Z,1509674119.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:19.963Z,1509674119.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:20.347Z,1509674120.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:20.364Z,1509674120.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:20.743Z,1509674120.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:20.758Z,1509674120.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:21.153Z,1509674121.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:21.184Z,1509674121.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:21.553Z,1509674121.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:21.586Z,1509674121.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:21.957Z,1509674121.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:21.983Z,1509674121.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:22.339Z,1509674122.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:22.354Z,1509674122.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:22.740Z,1509674122.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:22.755Z,1509674122.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:23.147Z,1509674123.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:23.209Z,1509674123.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:23.543Z,1509674123.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:23.558Z,1509674123.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:23.944Z,1509674123.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:23.959Z,1509674123.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:24.345Z,1509674124.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:24.410Z,1509674124.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:24.749Z,1509674124.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:24.765Z,1509674124.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:25.157Z,1509674125.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:25.203Z,1509674125.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:25.543Z,1509674125.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:25.558Z,1509674125.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:25.943Z,1509674125.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:25.991Z,1509674125.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:26.344Z,1509674126.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:26.395Z,1509674126.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:26.743Z,1509674126.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:26.758Z,1509674126.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:27.157Z,1509674127.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:27.186Z,1509674127.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:27.558Z,1509674127.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:27.589Z,1509674127.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:27.957Z,1509674127.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:27.987Z,1509674127.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:28.343Z,1509674128.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:28.358Z,1509674128.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:28.743Z,1509674128.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:28.758Z,1509674128.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:29.143Z,1509674129.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:29.158Z,1509674129.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:29.544Z,1509674129.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:29.559Z,1509674129.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:29.943Z,1509674129.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:29.958Z,1509674129.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:30.361Z,1509674130.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:30.391Z,1509674130.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:30.749Z,1509674130.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:30.764Z,1509674130.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:31.157Z,1509674131.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:31.189Z,1509674131.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:31.543Z,1509674131.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:31.558Z,1509674131.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:31.943Z,1509674131.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:31.958Z,1509674131.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:32.348Z,1509674132.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:32.363Z,1509674132.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:32.743Z,1509674132.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:32.758Z,1509674132.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:33.157Z,1509674133.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:33.189Z,1509674133.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:33.557Z,1509674133.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:33.572Z,1509674133.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:33.961Z,1509674133.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:33.991Z,1509674133.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:34.347Z,1509674134.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:34.362Z,1509674134.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:34.747Z,1509674134.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:34.762Z,1509674134.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:35.147Z,1509674135.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:35.162Z,1509674135.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:35.548Z,1509674135.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:35.571Z,1509674135.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:35.947Z,1509674135.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:35.963Z,1509674135.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:36.353Z,1509674136.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:36.368Z,1509674136.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:36.476Z,1509674136.476 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:55:36.476Z,1509674136.476 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T01:55:36.560Z,1509674136.560 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:55:36.561Z,1509674136.561 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:55:36.561Z,1509674136.561 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:55:36.561Z,1509674136.561 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:55:36.761Z,1509674136.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:36.822Z,1509674136.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:37.154Z,1509674137.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:37.169Z,1509674137.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:37.548Z,1509674137.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:37.563Z,1509674137.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:40.735Z,1509674140.735 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:55:40.754Z,1509674140.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:40.905Z,1509674140.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:40.968Z,1509674140.968 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:55:40.969Z,1509674140.969 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:55:40.970Z,1509674140.970 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:55:40.970Z,1509674140.970 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:55:41.094Z,1509674141.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:41.123Z,1509674141.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:41.498Z,1509674141.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:41.514Z,1509674141.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:41.894Z,1509674141.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:41.910Z,1509674141.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:42.278Z,1509674142.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:42.304Z,1509674142.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:42.672Z,1509674142.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:42.703Z,1509674142.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:43.068Z,1509674143.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:43.115Z,1509674143.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:43.470Z,1509674143.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:43.485Z,1509674143.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:43.868Z,1509674143.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:43.914Z,1509674143.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:44.278Z,1509674144.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:44.331Z,1509674144.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:44.698Z,1509674144.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:44.713Z,1509674144.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:45.082Z,1509674145.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:45.115Z,1509674145.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:45.472Z,1509674145.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:45.488Z,1509674145.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:45.874Z,1509674145.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:45.909Z,1509674145.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:46.272Z,1509674146.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:46.287Z,1509674146.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:46.670Z,1509674146.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:46.685Z,1509674146.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:47.081Z,1509674147.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:47.106Z,1509674147.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:47.506Z,1509674147.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:47.522Z,1509674147.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:47.897Z,1509674147.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:47.963Z,1509674147.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:48.277Z,1509674148.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:48.292Z,1509674148.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:48.673Z,1509674148.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:48.695Z,1509674148.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:49.074Z,1509674149.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:49.089Z,1509674149.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:49.478Z,1509674149.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:49.515Z,1509674149.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:49.872Z,1509674149.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:49.887Z,1509674149.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:50.286Z,1509674150.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:50.317Z,1509674150.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:50.687Z,1509674150.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:50.716Z,1509674150.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:51.123Z,1509674151.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:51.146Z,1509674151.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:51.480Z,1509674151.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:51.500Z,1509674151.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:51.876Z,1509674151.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:51.901Z,1509674151.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:52.278Z,1509674152.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:52.304Z,1509674152.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:52.676Z,1509674152.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:52.709Z,1509674152.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:53.093Z,1509674153.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:53.139Z,1509674153.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:53.483Z,1509674153.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:53.521Z,1509674153.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:53.880Z,1509674153.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:53.917Z,1509674153.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:54.274Z,1509674154.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:54.319Z,1509674154.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:54.683Z,1509674154.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:54.723Z,1509674154.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:55.130Z,1509674155.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:55.214Z,1509674155.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:55.485Z,1509674155.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:55.500Z,1509674155.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:55.882Z,1509674155.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:55.926Z,1509674155.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:56.276Z,1509674156.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:56.367Z,1509674156.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:56.687Z,1509674156.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:56.747Z,1509674156.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:57.082Z,1509674157.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:57.147Z,1509674157.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:57.472Z,1509674157.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:57.531Z,1509674157.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:57.873Z,1509674157.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:57.904Z,1509674157.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:58.287Z,1509674158.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:58.379Z,1509674158.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:58.691Z,1509674158.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:58.735Z,1509674158.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:59.134Z,1509674159.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:59.231Z,1509674159.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:59.469Z,1509674159.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:59.507Z,1509674159.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:55:59.868Z,1509674159.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:55:59.909Z,1509674159.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:00.269Z,1509674160.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:00.307Z,1509674160.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:00.668Z,1509674160.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:00.702Z,1509674160.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:01.087Z,1509674161.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:01.115Z,1509674161.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:01.491Z,1509674161.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:01.519Z,1509674161.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:01.898Z,1509674161.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:01.913Z,1509674161.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:02.264Z,1509674162.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:02.279Z,1509674162.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:02.670Z,1509674162.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:02.707Z,1509674162.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:03.068Z,1509674163.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:03.106Z,1509674163.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:03.465Z,1509674163.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:03.480Z,1509674163.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:03.878Z,1509674163.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:03.911Z,1509674163.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:04.281Z,1509674164.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:04.308Z,1509674164.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:04.693Z,1509674164.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:04.711Z,1509674164.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:05.077Z,1509674165.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:05.103Z,1509674165.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:05.470Z,1509674165.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:05.507Z,1509674165.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:05.867Z,1509674165.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:05.903Z,1509674165.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:06.271Z,1509674166.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:06.287Z,1509674166.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:06.667Z,1509674166.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:06.682Z,1509674166.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:07.105Z,1509674167.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:07.135Z,1509674167.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:07.481Z,1509674167.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:07.506Z,1509674167.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:07.885Z,1509674167.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:07.911Z,1509674167.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:08.267Z,1509674168.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:08.283Z,1509674168.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:08.675Z,1509674168.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:08.707Z,1509674168.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:09.096Z,1509674169.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:09.124Z,1509674169.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:09.471Z,1509674169.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:09.497Z,1509674169.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:09.870Z,1509674169.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:09.896Z,1509674169.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:10.289Z,1509674170.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:10.351Z,1509674170.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:10.693Z,1509674170.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:10.708Z,1509674170.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:11.124Z,1509674171.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:11.210Z,1509674171.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:11.469Z,1509674171.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:11.484Z,1509674171.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:11.871Z,1509674171.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:11.910Z,1509674171.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:12.271Z,1509674172.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:12.319Z,1509674172.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:12.671Z,1509674172.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:12.709Z,1509674172.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:13.081Z,1509674173.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:13.187Z,1509674173.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:13.485Z,1509674173.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:13.511Z,1509674173.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:13.885Z,1509674173.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:13.950Z,1509674173.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:14.268Z,1509674174.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:14.283Z,1509674174.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:14.672Z,1509674174.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:14.703Z,1509674174.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:15.071Z,1509674175.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:15.086Z,1509674175.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:15.468Z,1509674175.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:15.483Z,1509674175.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:15.869Z,1509674175.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:15.890Z,1509674175.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:16.289Z,1509674176.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:16.320Z,1509674176.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:16.689Z,1509674176.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:16.704Z,1509674176.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:17.089Z,1509674177.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:17.104Z,1509674177.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:17.476Z,1509674177.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:17.491Z,1509674177.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:17.871Z,1509674177.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:17.886Z,1509674177.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:18.276Z,1509674178.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:18.295Z,1509674178.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:18.674Z,1509674178.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:18.693Z,1509674178.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:19.077Z,1509674179.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:19.093Z,1509674179.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:19.481Z,1509674179.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:19.495Z,1509674179.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:19.877Z,1509674179.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:19.893Z,1509674179.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:20.277Z,1509674180.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:20.292Z,1509674180.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:20.674Z,1509674180.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:20.689Z,1509674180.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:21.112Z,1509674181.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:21.136Z,1509674181.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:21.490Z,1509674181.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:21.522Z,1509674181.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:21.890Z,1509674181.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:21.921Z,1509674181.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:22.276Z,1509674182.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:22.292Z,1509674182.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:22.676Z,1509674182.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:22.699Z,1509674182.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:23.100Z,1509674183.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:23.136Z,1509674183.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:23.477Z,1509674183.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:23.493Z,1509674183.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:23.891Z,1509674183.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:23.922Z,1509674183.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:24.281Z,1509674184.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:24.296Z,1509674184.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:24.689Z,1509674184.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:24.739Z,1509674184.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:25.128Z,1509674185.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:25.148Z,1509674185.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:25.478Z,1509674185.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:25.494Z,1509674185.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:25.879Z,1509674185.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:25.947Z,1509674185.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:26.280Z,1509674186.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:26.295Z,1509674186.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:26.665Z,1509674186.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:26.700Z,1509674186.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:27.096Z,1509674187.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:27.185Z,1509674187.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:27.486Z,1509674187.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:27.501Z,1509674187.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:27.884Z,1509674187.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:27.934Z,1509674187.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:28.271Z,1509674188.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:28.295Z,1509674188.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:28.673Z,1509674188.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:28.733Z,1509674188.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:29.079Z,1509674189.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:29.109Z,1509674189.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:29.470Z,1509674189.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:29.501Z,1509674189.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:29.870Z,1509674189.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:29.895Z,1509674189.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:30.290Z,1509674190.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:30.305Z,1509674190.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:30.694Z,1509674190.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:30.709Z,1509674190.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:31.089Z,1509674191.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:31.105Z,1509674191.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:31.464Z,1509674191.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:31.497Z,1509674191.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:31.867Z,1509674191.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:31.881Z,1509674191.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:32.269Z,1509674192.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:32.284Z,1509674192.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:32.668Z,1509674192.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:32.682Z,1509674192.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:33.077Z,1509674193.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:33.109Z,1509674193.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:33.489Z,1509674193.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:33.539Z,1509674193.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:33.883Z,1509674193.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:33.903Z,1509674193.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:34.278Z,1509674194.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:34.293Z,1509674194.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:34.666Z,1509674194.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:34.687Z,1509674194.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:35.108Z,1509674195.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:35.135Z,1509674195.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:35.479Z,1509674195.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:35.495Z,1509674195.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:35.875Z,1509674195.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:35.891Z,1509674195.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:36.283Z,1509674196.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:36.306Z,1509674196.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:36.685Z,1509674196.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:36.700Z,1509674196.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:37.123Z,1509674197.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:37.138Z,1509674197.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:37.476Z,1509674197.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:37.491Z,1509674197.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:37.876Z,1509674197.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:37.891Z,1509674197.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:41.083Z,1509674201.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:41.150Z,1509674201.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:41.303Z,1509674201.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:41.339Z,1509674201.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:41.710Z,1509674201.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:41.736Z,1509674201.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:41.829Z,1509674201.829 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T01:56:41.829Z,1509674201.829 [DropWeight] No Fault, FailCount= 1
2017-11-03T01:56:42.121Z,1509674202.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:42.136Z,1509674202.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:42.521Z,1509674202.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:42.542Z,1509674202.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:42.897Z,1509674202.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:42.933Z,1509674202.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:43.353Z,1509674203.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:43.390Z,1509674203.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:43.702Z,1509674203.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:43.710Z,1509674203.710 [BPC1](ERROR): Failed to receive battery data
2017-11-03T01:56:43.710Z,1509674203.710 [BPC1] Communications Fault, FailCount= 1
2017-11-03T01:56:43.710Z,1509674203.710 [BPC1](ERROR): Communications Fault
2017-11-03T01:56:43.745Z,1509674203.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:43.825Z,1509674203.825 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T01:56:44.109Z,1509674204.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:44.143Z,1509674204.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:44.529Z,1509674204.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:44.551Z,1509674204.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:44.914Z,1509674204.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:44.947Z,1509674204.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:45.044Z,1509674205.044 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:56:45.044Z,1509674205.044 [BPC1] No Fault, FailCount= 1
2017-11-03T01:56:45.303Z,1509674205.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:45.387Z,1509674205.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:45.703Z,1509674205.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:45.740Z,1509674205.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:46.102Z,1509674206.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:46.123Z,1509674206.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:46.502Z,1509674206.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:46.518Z,1509674206.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:46.902Z,1509674206.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:46.918Z,1509674206.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:47.318Z,1509674207.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:47.340Z,1509674207.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:47.737Z,1509674207.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:47.752Z,1509674207.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:48.115Z,1509674208.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:48.147Z,1509674208.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:48.500Z,1509674208.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:48.516Z,1509674208.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:48.902Z,1509674208.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:48.918Z,1509674208.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:49.300Z,1509674209.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:49.350Z,1509674209.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:49.706Z,1509674209.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:49.722Z,1509674209.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:50.114Z,1509674210.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:50.145Z,1509674210.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:50.514Z,1509674210.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:50.544Z,1509674210.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:50.906Z,1509674210.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:50.921Z,1509674210.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:51.305Z,1509674211.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:51.321Z,1509674211.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:51.720Z,1509674211.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:51.746Z,1509674211.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:52.104Z,1509674212.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:52.123Z,1509674212.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:52.500Z,1509674212.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:52.516Z,1509674212.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:52.900Z,1509674212.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:52.916Z,1509674212.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:53.319Z,1509674213.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:53.347Z,1509674213.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:53.712Z,1509674213.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:53.743Z,1509674213.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:54.106Z,1509674214.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:54.121Z,1509674214.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:54.499Z,1509674214.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:54.514Z,1509674214.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:54.899Z,1509674214.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:54.914Z,1509674214.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:55.305Z,1509674215.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:55.320Z,1509674215.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:55.699Z,1509674215.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:55.719Z,1509674215.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:56.105Z,1509674216.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:56.121Z,1509674216.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:56.514Z,1509674216.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:56.546Z,1509674216.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:56.913Z,1509674216.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:56.952Z,1509674216.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:57.355Z,1509674217.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:57.402Z,1509674217.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:57.704Z,1509674217.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:57.723Z,1509674217.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:58.103Z,1509674218.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:58.119Z,1509674218.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:58.504Z,1509674218.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:58.520Z,1509674218.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:58.904Z,1509674218.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:58.923Z,1509674218.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:59.318Z,1509674219.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:59.346Z,1509674219.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:59.709Z,1509674219.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:56:59.718Z,1509674219.718 [BPC1](ERROR): Failed to parse message.
2017-11-03T01:56:59.718Z,1509674219.718 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T01:56:59.718Z,1509674219.718 [BPC1] Data Fault, FailCount= 2
2017-11-03T01:56:59.718Z,1509674219.718 [BPC1](ERROR): Data Fault
2017-11-03T01:56:59.755Z,1509674219.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:56:59.853Z,1509674219.853 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:57:00.118Z,1509674220.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:00.146Z,1509674220.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:00.503Z,1509674220.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:00.519Z,1509674220.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:00.904Z,1509674220.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:00.919Z,1509674220.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:01.034Z,1509674221.034 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:57:01.034Z,1509674221.034 [BPC1] No Fault, FailCount= 2
2017-11-03T01:57:01.304Z,1509674221.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:01.390Z,1509674221.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:01.702Z,1509674221.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:01.717Z,1509674221.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:02.109Z,1509674222.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:02.162Z,1509674222.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:02.506Z,1509674222.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:02.521Z,1509674222.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:02.918Z,1509674222.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:02.946Z,1509674222.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:03.299Z,1509674223.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:03.314Z,1509674223.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:03.703Z,1509674223.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:03.719Z,1509674223.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:04.102Z,1509674224.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:04.122Z,1509674224.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:04.501Z,1509674224.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:04.523Z,1509674224.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:04.904Z,1509674224.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:04.923Z,1509674224.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:05.305Z,1509674225.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:05.321Z,1509674225.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:05.718Z,1509674225.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:05.748Z,1509674225.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:06.118Z,1509674226.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:06.147Z,1509674226.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:06.503Z,1509674226.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:06.519Z,1509674226.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:06.901Z,1509674226.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:06.915Z,1509674226.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:07.300Z,1509674227.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:07.315Z,1509674227.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:07.704Z,1509674227.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:07.723Z,1509674227.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:08.108Z,1509674228.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:08.124Z,1509674228.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:08.509Z,1509674228.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:08.525Z,1509674228.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:08.909Z,1509674228.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:08.930Z,1509674228.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:09.298Z,1509674229.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:09.326Z,1509674229.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:09.706Z,1509674229.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:09.723Z,1509674229.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:10.104Z,1509674230.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:10.119Z,1509674230.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:10.508Z,1509674230.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:10.523Z,1509674230.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:10.904Z,1509674230.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:10.920Z,1509674230.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:11.365Z,1509674231.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:11.393Z,1509674231.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:11.716Z,1509674231.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:11.738Z,1509674231.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:12.116Z,1509674232.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:12.132Z,1509674232.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:12.506Z,1509674232.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:12.523Z,1509674232.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:12.905Z,1509674232.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:12.970Z,1509674232.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:13.305Z,1509674233.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:13.321Z,1509674233.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:13.714Z,1509674233.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:13.735Z,1509674233.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:14.122Z,1509674234.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:14.171Z,1509674234.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:14.518Z,1509674234.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:14.533Z,1509674234.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:14.918Z,1509674234.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:14.966Z,1509674234.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:15.292Z,1509674235.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:15.343Z,1509674235.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:15.343Z,1509674235.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2017-11-03T01:57:15.344Z,1509674235.344 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T01:57:15.345Z,1509674235.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:15.345Z,1509674235.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2017-11-03T01:57:15.346Z,1509674235.346 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T01:57:15.347Z,1509674235.347 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:15.347Z,1509674235.347 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2017-11-03T01:57:15.347Z,1509674235.347 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T01:57:15.460Z,1509674235.460 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T01:57:15.461Z,1509674235.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T01:57:15.461Z,1509674235.461 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T01:57:15.695Z,1509674235.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:15.808Z,1509674235.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T01:57:15.809Z,1509674235.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2017-11-03T01:57:15.809Z,1509674235.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T01:57:15.809Z,1509674235.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2017-11-03T01:57:15.810Z,1509674235.810 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T01:57:15.810Z,1509674235.810 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2017-11-03T01:57:16.095Z,1509674236.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:16.120Z,1509674236.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T01:57:16.120Z,1509674236.120 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:57:16.121Z,1509674236.121 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:57:16.121Z,1509674236.121 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T01:57:16.122Z,1509674236.122 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:57:16.122Z,1509674236.122 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:57:16.122Z,1509674236.122 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T01:57:16.123Z,1509674236.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T01:57:16.123Z,1509674236.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T01:57:16.496Z,1509674236.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:16.523Z,1509674236.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:16.896Z,1509674236.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:16.911Z,1509674236.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:17.321Z,1509674237.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:17.336Z,1509674237.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:17.709Z,1509674237.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:17.743Z,1509674237.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:18.119Z,1509674238.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:18.134Z,1509674238.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:18.499Z,1509674238.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:18.533Z,1509674238.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:18.896Z,1509674238.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:18.911Z,1509674238.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:19.308Z,1509674239.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:19.333Z,1509674239.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:19.700Z,1509674239.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:19.732Z,1509674239.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:20.123Z,1509674240.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:20.137Z,1509674240.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:20.510Z,1509674240.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:20.543Z,1509674240.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:20.906Z,1509674240.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:20.931Z,1509674240.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:21.302Z,1509674241.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:21.333Z,1509674241.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:21.700Z,1509674241.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:21.716Z,1509674241.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:22.103Z,1509674242.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:22.139Z,1509674242.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:22.503Z,1509674242.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:22.519Z,1509674242.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:22.901Z,1509674242.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:22.918Z,1509674242.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:23.330Z,1509674243.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:23.345Z,1509674243.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:23.713Z,1509674243.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:23.740Z,1509674243.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:24.114Z,1509674244.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:24.147Z,1509674244.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:24.501Z,1509674244.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:24.516Z,1509674244.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:24.901Z,1509674244.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:24.917Z,1509674244.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:25.357Z,1509674245.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:25.396Z,1509674245.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:25.700Z,1509674245.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:25.716Z,1509674245.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:26.115Z,1509674246.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:26.171Z,1509674246.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:26.514Z,1509674246.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:26.551Z,1509674246.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:26.914Z,1509674246.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:26.974Z,1509674246.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:27.300Z,1509674247.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:27.316Z,1509674247.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:27.702Z,1509674247.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:27.718Z,1509674247.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:28.102Z,1509674248.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:28.154Z,1509674248.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:28.505Z,1509674248.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:28.520Z,1509674248.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:28.900Z,1509674248.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:28.954Z,1509674248.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:29.309Z,1509674249.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:29.362Z,1509674249.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:29.726Z,1509674249.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:29.755Z,1509674249.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:30.118Z,1509674250.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:30.147Z,1509674250.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:30.504Z,1509674250.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:30.523Z,1509674250.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:30.904Z,1509674250.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:30.919Z,1509674250.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:31.299Z,1509674251.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:31.314Z,1509674251.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:31.702Z,1509674251.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:31.718Z,1509674251.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:32.110Z,1509674252.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:32.125Z,1509674252.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:32.506Z,1509674252.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:32.521Z,1509674252.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:32.909Z,1509674252.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:32.925Z,1509674252.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:33.303Z,1509674253.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:33.319Z,1509674253.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:33.700Z,1509674253.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:33.723Z,1509674253.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:34.103Z,1509674254.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:34.119Z,1509674254.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:34.504Z,1509674254.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:34.523Z,1509674254.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:34.900Z,1509674254.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:34.923Z,1509674254.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:35.305Z,1509674255.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:35.321Z,1509674255.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:35.713Z,1509674255.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:35.746Z,1509674255.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:36.118Z,1509674256.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:36.147Z,1509674256.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:36.502Z,1509674256.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:36.518Z,1509674256.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:36.688Z,1509674256.688 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:57:36.688Z,1509674256.688 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T01:57:36.688Z,1509674256.688 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:57:36.903Z,1509674256.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:36.922Z,1509674256.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T01:57:36.923Z,1509674256.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:37.036Z,1509674257.036 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:57:37.093Z,1509674257.093 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:57:37.234Z,1509674257.234 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:57:37.311Z,1509674257.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:37.331Z,1509674257.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T01:57:37.349Z,1509674257.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:37.705Z,1509674257.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:37.720Z,1509674257.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T01:57:37.721Z,1509674257.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:38.122Z,1509674258.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:38.142Z,1509674258.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T01:57:38.143Z,1509674258.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:41.282Z,1509674261.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:41.354Z,1509674261.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T01:57:41.355Z,1509674261.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:41.441Z,1509674261.441 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:57:41.441Z,1509674261.441 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T01:57:41.502Z,1509674261.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:41.542Z,1509674261.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T01:57:41.543Z,1509674261.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:41.676Z,1509674261.676 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:57:41.677Z,1509674261.677 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:57:41.677Z,1509674261.677 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:57:41.677Z,1509674261.677 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:57:41.881Z,1509674261.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:41.896Z,1509674261.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T01:57:41.897Z,1509674261.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:42.284Z,1509674262.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:42.330Z,1509674262.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T01:57:42.331Z,1509674262.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:42.682Z,1509674262.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:42.697Z,1509674262.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T01:57:42.697Z,1509674262.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:43.091Z,1509674263.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:43.149Z,1509674263.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T01:57:43.150Z,1509674263.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:43.491Z,1509674263.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:43.543Z,1509674263.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T01:57:43.544Z,1509674263.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:43.895Z,1509674263.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:43.924Z,1509674263.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T01:57:43.925Z,1509674263.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:44.279Z,1509674264.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:44.295Z,1509674264.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T01:57:44.296Z,1509674264.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:44.680Z,1509674264.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:44.695Z,1509674264.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T01:57:44.697Z,1509674264.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:45.080Z,1509674265.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:45.094Z,1509674265.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T01:57:45.095Z,1509674265.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:45.476Z,1509674265.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:45.490Z,1509674265.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T01:57:45.491Z,1509674265.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:45.793Z,1509674265.793 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:57:45.880Z,1509674265.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:45.895Z,1509674265.895 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:57:45.896Z,1509674265.896 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:57:45.897Z,1509674265.897 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:57:45.898Z,1509674265.898 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:57:45.967Z,1509674265.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T01:57:45.968Z,1509674265.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:46.297Z,1509674266.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:46.343Z,1509674266.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:46.693Z,1509674266.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:46.729Z,1509674266.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:47.090Z,1509674267.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:47.122Z,1509674267.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:47.480Z,1509674267.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:47.495Z,1509674267.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:47.883Z,1509674267.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:47.898Z,1509674267.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:48.280Z,1509674268.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:48.303Z,1509674268.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:48.680Z,1509674268.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:48.695Z,1509674268.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:49.093Z,1509674269.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:49.130Z,1509674269.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:49.493Z,1509674269.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:49.525Z,1509674269.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:49.890Z,1509674269.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:49.926Z,1509674269.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:50.286Z,1509674270.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:50.304Z,1509674270.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:50.683Z,1509674270.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:50.700Z,1509674270.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:51.084Z,1509674271.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:51.099Z,1509674271.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:51.485Z,1509674271.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:51.500Z,1509674271.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:51.884Z,1509674271.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:51.906Z,1509674271.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:52.290Z,1509674272.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:52.335Z,1509674272.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:52.697Z,1509674272.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:52.733Z,1509674272.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:53.098Z,1509674273.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:53.114Z,1509674273.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:53.476Z,1509674273.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:53.502Z,1509674273.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:53.876Z,1509674273.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:53.907Z,1509674273.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:54.279Z,1509674274.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:54.331Z,1509674274.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:54.677Z,1509674274.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:54.711Z,1509674274.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:55.102Z,1509674275.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:55.130Z,1509674275.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:55.490Z,1509674275.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:55.527Z,1509674275.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:55.889Z,1509674275.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:55.959Z,1509674275.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:56.279Z,1509674276.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:56.303Z,1509674276.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:56.684Z,1509674276.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:56.731Z,1509674276.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:57.091Z,1509674277.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:57.141Z,1509674277.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:57.480Z,1509674277.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:57.523Z,1509674277.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:57.876Z,1509674277.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:57.931Z,1509674277.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:58.293Z,1509674278.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:58.323Z,1509674278.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:58.693Z,1509674278.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:58.718Z,1509674278.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:59.115Z,1509674279.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:59.135Z,1509674279.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:59.479Z,1509674279.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:59.519Z,1509674279.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:57:59.877Z,1509674279.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:57:59.892Z,1509674279.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:00.276Z,1509674280.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:00.291Z,1509674280.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:00.677Z,1509674280.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:00.691Z,1509674280.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:01.123Z,1509674281.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:01.138Z,1509674281.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:01.489Z,1509674281.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:01.529Z,1509674281.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:01.893Z,1509674281.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:01.925Z,1509674281.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:02.280Z,1509674282.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:02.303Z,1509674282.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:02.677Z,1509674282.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:02.691Z,1509674282.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:03.126Z,1509674283.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:03.171Z,1509674283.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:03.490Z,1509674283.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:03.517Z,1509674283.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:03.882Z,1509674283.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:03.897Z,1509674283.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:04.289Z,1509674284.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:04.305Z,1509674284.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:04.689Z,1509674284.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:04.704Z,1509674284.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:05.090Z,1509674285.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:05.105Z,1509674285.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:05.494Z,1509674285.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:05.509Z,1509674285.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:05.886Z,1509674285.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:05.901Z,1509674285.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:06.287Z,1509674286.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:06.307Z,1509674286.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:06.680Z,1509674286.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:06.700Z,1509674286.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:07.093Z,1509674287.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:07.114Z,1509674287.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:07.490Z,1509674287.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:07.505Z,1509674287.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:07.890Z,1509674287.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:07.905Z,1509674287.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:08.287Z,1509674288.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:08.307Z,1509674288.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:08.685Z,1509674288.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:08.700Z,1509674288.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:09.084Z,1509674289.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:09.146Z,1509674289.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:09.489Z,1509674289.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:09.504Z,1509674289.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:09.878Z,1509674289.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:09.899Z,1509674289.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:10.292Z,1509674290.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:10.354Z,1509674290.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:10.697Z,1509674290.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:10.719Z,1509674290.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:11.104Z,1509674291.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:11.145Z,1509674291.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:11.479Z,1509674291.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:11.547Z,1509674291.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:11.877Z,1509674291.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:11.903Z,1509674291.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:12.280Z,1509674292.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:12.347Z,1509674292.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:12.676Z,1509674292.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:12.746Z,1509674292.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:13.108Z,1509674293.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:13.147Z,1509674293.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:13.501Z,1509674293.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:13.516Z,1509674293.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:13.898Z,1509674293.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:13.913Z,1509674293.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:14.273Z,1509674294.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:14.300Z,1509674294.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:14.676Z,1509674294.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:14.707Z,1509674294.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:15.113Z,1509674295.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:15.165Z,1509674295.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:15.482Z,1509674295.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:15.510Z,1509674295.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:15.883Z,1509674295.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:15.913Z,1509674295.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:16.297Z,1509674296.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:16.312Z,1509674296.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:16.701Z,1509674296.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:16.716Z,1509674296.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:17.123Z,1509674297.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:17.176Z,1509674297.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:17.481Z,1509674297.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:17.509Z,1509674297.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:17.882Z,1509674297.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:17.905Z,1509674297.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:18.277Z,1509674298.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:18.293Z,1509674298.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:18.673Z,1509674298.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:18.688Z,1509674298.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:19.089Z,1509674299.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:19.119Z,1509674299.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:19.493Z,1509674299.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:19.519Z,1509674299.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:19.890Z,1509674299.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:19.915Z,1509674299.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:20.273Z,1509674300.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:20.288Z,1509674300.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:20.715Z,1509674300.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:20.730Z,1509674300.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:21.077Z,1509674301.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:21.093Z,1509674301.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:21.477Z,1509674301.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:21.515Z,1509674301.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:21.880Z,1509674301.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:21.897Z,1509674301.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:22.291Z,1509674302.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:22.321Z,1509674302.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:22.695Z,1509674302.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:22.719Z,1509674302.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:23.090Z,1509674303.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:23.122Z,1509674303.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:23.475Z,1509674303.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:23.527Z,1509674303.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:23.887Z,1509674303.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:23.896Z,1509674303.896 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T01:58:23.896Z,1509674303.896 [BPC1] Data Fault, FailCount= 1
2017-11-03T01:58:23.896Z,1509674303.896 [BPC1](ERROR): Data Fault
2017-11-03T01:58:23.935Z,1509674303.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:24.021Z,1509674304.021 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T01:58:24.284Z,1509674304.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:24.307Z,1509674304.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:24.683Z,1509674304.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:24.698Z,1509674304.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:25.111Z,1509674305.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:25.141Z,1509674305.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:25.224Z,1509674305.224 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T01:58:25.224Z,1509674305.224 [BPC1] No Fault, FailCount= 1
2017-11-03T01:58:25.486Z,1509674305.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:25.571Z,1509674305.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:25.897Z,1509674305.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:25.929Z,1509674305.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:26.285Z,1509674306.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:26.338Z,1509674306.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:26.684Z,1509674306.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:26.699Z,1509674306.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:27.099Z,1509674307.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:27.141Z,1509674307.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:27.485Z,1509674307.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:27.500Z,1509674307.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:27.884Z,1509674307.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:27.907Z,1509674307.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:28.301Z,1509674308.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:28.331Z,1509674308.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:28.697Z,1509674308.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:28.712Z,1509674308.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:29.120Z,1509674309.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:29.145Z,1509674309.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:29.482Z,1509674309.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:29.499Z,1509674309.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:29.883Z,1509674309.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:29.898Z,1509674309.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:30.284Z,1509674310.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:30.299Z,1509674310.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:30.683Z,1509674310.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:30.697Z,1509674310.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:31.106Z,1509674311.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:31.176Z,1509674311.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:31.497Z,1509674311.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:31.532Z,1509674311.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:31.885Z,1509674311.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:31.899Z,1509674311.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:32.284Z,1509674312.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:32.299Z,1509674312.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:32.684Z,1509674312.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:32.699Z,1509674312.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:33.081Z,1509674313.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:33.096Z,1509674313.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:33.492Z,1509674313.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:33.507Z,1509674313.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:33.884Z,1509674313.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:33.907Z,1509674313.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:34.297Z,1509674314.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:34.330Z,1509674314.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:34.697Z,1509674314.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:34.712Z,1509674314.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:35.098Z,1509674315.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:35.129Z,1509674315.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:35.483Z,1509674315.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:35.498Z,1509674315.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:35.883Z,1509674315.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:35.902Z,1509674315.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:36.281Z,1509674316.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:36.296Z,1509674316.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:36.683Z,1509674316.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:36.698Z,1509674316.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:37.089Z,1509674317.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:37.150Z,1509674317.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:37.153Z,1509674317.153 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T01:58:37.153Z,1509674317.153 [Default:CheckIn:C.Wait] Stopped
2017-11-03T01:58:37.153Z,1509674317.153 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T01:58:37.153Z,1509674317.153 [Default:CheckIn:D] Running Loop=1
2017-11-03T01:58:37.497Z,1509674317.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:37.529Z,1509674317.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:37.532Z,1509674317.532 [Default:CheckIn:D] Stopped
2017-11-03T01:58:37.532Z,1509674317.532 [Default:CheckIn:E] Running Loop=1
2017-11-03T01:58:37.889Z,1509674317.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:37.923Z,1509674317.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:37.926Z,1509674317.926 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.499422 min 
2017-11-03T01:58:37.926Z,1509674317.926 [Default:CheckIn:E] Stopped
2017-11-03T01:58:37.926Z,1509674317.926 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T01:58:37.926Z,1509674317.926 [Default:CheckIn] Stopped
2017-11-03T01:58:37.927Z,1509674317.927 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T01:58:37.927Z,1509674317.927 [Default:CheckIn](INFO): Running loop #11
2017-11-03T01:58:37.927Z,1509674317.927 [Default:CheckIn] Running Loop=11
2017-11-03T01:58:37.927Z,1509674317.927 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T01:58:37.927Z,1509674317.927 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T01:58:38.283Z,1509674318.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:38.313Z,1509674318.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:41.551Z,1509674321.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:41.611Z,1509674321.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:41.737Z,1509674321.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:41.766Z,1509674321.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:42.160Z,1509674322.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:42.175Z,1509674322.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:42.567Z,1509674322.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:42.582Z,1509674322.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:42.958Z,1509674322.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:43.018Z,1509674323.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:43.338Z,1509674323.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:43.370Z,1509674323.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:43.737Z,1509674323.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:43.783Z,1509674323.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:44.136Z,1509674324.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:44.194Z,1509674324.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:44.539Z,1509674324.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:44.578Z,1509674324.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:44.936Z,1509674324.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:44.952Z,1509674324.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:45.362Z,1509674325.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:45.383Z,1509674325.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:45.750Z,1509674325.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:45.777Z,1509674325.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:46.146Z,1509674326.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:46.175Z,1509674326.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:46.536Z,1509674326.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:46.551Z,1509674326.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:46.937Z,1509674326.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:46.952Z,1509674326.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:47.379Z,1509674327.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:47.401Z,1509674327.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:47.736Z,1509674327.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:47.753Z,1509674327.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:48.158Z,1509674328.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:48.190Z,1509674328.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:48.551Z,1509674328.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:48.582Z,1509674328.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:48.950Z,1509674328.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:49.034Z,1509674329.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:49.336Z,1509674329.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:49.359Z,1509674329.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:49.739Z,1509674329.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:49.759Z,1509674329.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:50.143Z,1509674330.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:50.163Z,1509674330.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:50.542Z,1509674330.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:50.557Z,1509674330.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:50.939Z,1509674330.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:50.954Z,1509674330.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:51.353Z,1509674331.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:51.388Z,1509674331.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:51.758Z,1509674331.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:51.780Z,1509674331.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:52.154Z,1509674332.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:52.186Z,1509674332.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:52.540Z,1509674332.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:52.562Z,1509674332.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:52.941Z,1509674332.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:52.956Z,1509674332.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:53.342Z,1509674333.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:53.357Z,1509674333.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:53.740Z,1509674333.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:53.756Z,1509674333.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:54.153Z,1509674334.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:54.185Z,1509674334.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:54.550Z,1509674334.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:54.565Z,1509674334.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:54.949Z,1509674334.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:55.003Z,1509674335.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:55.351Z,1509674335.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:55.376Z,1509674335.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:55.736Z,1509674335.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:55.751Z,1509674335.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:56.143Z,1509674336.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:56.220Z,1509674336.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:56.537Z,1509674336.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:56.552Z,1509674336.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:56.936Z,1509674336.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:56.975Z,1509674336.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:57.353Z,1509674337.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:57.422Z,1509674337.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:57.750Z,1509674337.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:57.785Z,1509674337.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:58.150Z,1509674338.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:58.202Z,1509674338.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:58.543Z,1509674338.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:58.595Z,1509674338.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:58.941Z,1509674338.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:58.956Z,1509674338.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:59.344Z,1509674339.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:59.359Z,1509674339.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:58:59.740Z,1509674339.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:58:59.755Z,1509674339.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:00.153Z,1509674340.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:00.184Z,1509674340.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:00.554Z,1509674340.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:00.583Z,1509674340.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:00.953Z,1509674340.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:00.982Z,1509674340.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:01.354Z,1509674341.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:01.389Z,1509674341.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:01.741Z,1509674341.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:01.756Z,1509674341.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:02.140Z,1509674342.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:02.155Z,1509674342.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:02.542Z,1509674342.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:02.556Z,1509674342.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:02.941Z,1509674342.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:02.956Z,1509674342.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:03.353Z,1509674343.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:03.383Z,1509674343.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:03.773Z,1509674343.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:03.788Z,1509674343.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:04.153Z,1509674344.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:04.185Z,1509674344.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:04.540Z,1509674344.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:04.555Z,1509674344.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:04.941Z,1509674344.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:04.963Z,1509674344.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:05.342Z,1509674345.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:05.357Z,1509674345.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:05.751Z,1509674345.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:05.787Z,1509674345.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:06.153Z,1509674346.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:06.185Z,1509674346.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:06.554Z,1509674346.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:06.582Z,1509674346.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:06.953Z,1509674346.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:06.982Z,1509674346.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:07.343Z,1509674347.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:07.370Z,1509674347.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:07.744Z,1509674347.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:07.759Z,1509674347.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:08.143Z,1509674348.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:08.158Z,1509674348.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:08.547Z,1509674348.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:08.562Z,1509674348.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:08.945Z,1509674348.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:08.960Z,1509674348.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:09.350Z,1509674349.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:09.415Z,1509674349.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:09.750Z,1509674349.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:09.765Z,1509674349.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:10.150Z,1509674350.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:10.165Z,1509674350.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:10.543Z,1509674350.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:10.558Z,1509674350.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:10.946Z,1509674350.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:11.010Z,1509674351.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:11.336Z,1509674351.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:11.363Z,1509674351.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:11.742Z,1509674351.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:11.787Z,1509674351.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:12.150Z,1509674352.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:12.165Z,1509674352.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:12.546Z,1509674352.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:12.598Z,1509674352.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:12.949Z,1509674352.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:12.994Z,1509674352.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:13.344Z,1509674353.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:13.359Z,1509674353.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:13.739Z,1509674353.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:13.763Z,1509674353.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:14.143Z,1509674354.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:14.158Z,1509674354.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:14.547Z,1509674354.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:14.562Z,1509674354.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:14.944Z,1509674354.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:14.959Z,1509674354.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:15.356Z,1509674355.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:15.395Z,1509674355.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:15.757Z,1509674355.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:15.773Z,1509674355.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:16.153Z,1509674356.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:16.175Z,1509674356.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:16.544Z,1509674356.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:16.559Z,1509674356.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:16.946Z,1509674356.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:16.961Z,1509674356.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:17.346Z,1509674357.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:17.361Z,1509674357.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:17.749Z,1509674357.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:17.763Z,1509674357.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:18.158Z,1509674358.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:18.173Z,1509674358.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:18.554Z,1509674358.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:18.575Z,1509674358.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:18.958Z,1509674358.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:18.973Z,1509674358.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:19.342Z,1509674359.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:19.366Z,1509674359.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:19.749Z,1509674359.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:19.764Z,1509674359.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:20.146Z,1509674360.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:20.167Z,1509674360.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:20.547Z,1509674360.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:20.563Z,1509674360.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:20.947Z,1509674360.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:20.962Z,1509674360.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:21.360Z,1509674361.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:21.375Z,1509674361.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:21.759Z,1509674361.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:21.775Z,1509674361.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:22.158Z,1509674362.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:22.179Z,1509674362.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:22.535Z,1509674362.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:22.563Z,1509674362.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:22.947Z,1509674362.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:22.971Z,1509674362.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:23.340Z,1509674363.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:23.367Z,1509674363.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:23.737Z,1509674363.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:23.771Z,1509674363.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:24.158Z,1509674364.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:24.179Z,1509674364.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:24.558Z,1509674364.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:24.573Z,1509674364.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:24.962Z,1509674364.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:24.995Z,1509674364.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:25.351Z,1509674365.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:25.406Z,1509674365.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:25.737Z,1509674365.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:25.753Z,1509674365.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:26.136Z,1509674366.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:26.180Z,1509674366.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:26.544Z,1509674366.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:26.559Z,1509674366.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:26.944Z,1509674366.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:27.002Z,1509674367.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:27.359Z,1509674367.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:27.427Z,1509674367.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:27.754Z,1509674367.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:27.787Z,1509674367.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:28.154Z,1509674368.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:28.179Z,1509674368.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:28.539Z,1509674368.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:28.554Z,1509674368.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:28.936Z,1509674368.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:28.950Z,1509674368.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:29.357Z,1509674369.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:29.398Z,1509674369.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:29.740Z,1509674369.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:29.755Z,1509674369.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:30.149Z,1509674370.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:30.176Z,1509674370.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:30.549Z,1509674370.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:30.581Z,1509674370.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:30.958Z,1509674370.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:30.973Z,1509674370.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:31.337Z,1509674371.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:31.372Z,1509674371.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:31.731Z,1509674371.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:31.771Z,1509674371.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:32.137Z,1509674372.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:32.152Z,1509674372.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:32.537Z,1509674372.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:32.552Z,1509674372.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:32.936Z,1509674372.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:32.951Z,1509674372.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:33.349Z,1509674373.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:33.375Z,1509674373.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:33.764Z,1509674373.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:33.779Z,1509674373.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:34.149Z,1509674374.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:34.179Z,1509674374.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:34.535Z,1509674374.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:34.550Z,1509674374.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:34.935Z,1509674374.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:34.950Z,1509674374.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:35.341Z,1509674375.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:35.373Z,1509674375.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:35.737Z,1509674375.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:35.752Z,1509674375.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:36.149Z,1509674376.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:36.180Z,1509674376.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:36.549Z,1509674376.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:36.580Z,1509674376.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:36.949Z,1509674376.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:36.982Z,1509674376.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:37.351Z,1509674377.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:37.367Z,1509674377.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:37.740Z,1509674377.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:37.759Z,1509674377.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:38.140Z,1509674378.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:38.155Z,1509674378.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:38.542Z,1509674378.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:38.557Z,1509674378.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:41.877Z,1509674381.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:41.947Z,1509674381.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:41.956Z,1509674381.956 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T01:59:41.957Z,1509674381.957 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T01:59:41.957Z,1509674381.957 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T01:59:42.037Z,1509674382.037 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T01:59:42.094Z,1509674382.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:42.118Z,1509674382.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.2 s old, using for 20.0 s.
2017-11-03T01:59:42.119Z,1509674382.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:42.361Z,1509674382.361 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T01:59:42.489Z,1509674382.489 [Rowe_600LCM](INFO): Powering down
2017-11-03T01:59:42.501Z,1509674382.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:42.519Z,1509674382.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.6 s old, using for 20.0 s.
2017-11-03T01:59:42.520Z,1509674382.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:42.899Z,1509674382.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:42.950Z,1509674382.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-03T01:59:42.951Z,1509674382.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:43.273Z,1509674383.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:43.299Z,1509674383.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-03T01:59:43.301Z,1509674383.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:43.673Z,1509674383.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:43.741Z,1509674383.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T01:59:43.742Z,1509674383.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:43.845Z,1509674383.845 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T01:59:43.845Z,1509674383.845 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T01:59:44.071Z,1509674384.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:44.104Z,1509674384.104 [Rowe_600LCM](INFO): Initializing
2017-11-03T01:59:44.105Z,1509674384.105 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T01:59:44.105Z,1509674384.105 [Rowe_600LCM](INFO): LCM OK
2017-11-03T01:59:44.105Z,1509674384.105 [Rowe_600LCM](INFO): Powering up
2017-11-03T01:59:44.153Z,1509674384.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-03T01:59:44.154Z,1509674384.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:44.473Z,1509674384.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:44.498Z,1509674384.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-03T01:59:44.499Z,1509674384.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:44.872Z,1509674384.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:44.898Z,1509674384.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-03T01:59:44.899Z,1509674384.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:45.293Z,1509674385.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:45.308Z,1509674385.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T01:59:45.309Z,1509674385.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:45.693Z,1509674385.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:45.707Z,1509674385.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T01:59:45.708Z,1509674385.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:46.094Z,1509674386.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:46.109Z,1509674386.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T01:59:46.110Z,1509674386.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:46.473Z,1509674386.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:46.585Z,1509674386.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T01:59:46.586Z,1509674386.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:46.872Z,1509674386.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:46.897Z,1509674386.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T01:59:46.898Z,1509674386.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:47.276Z,1509674387.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:47.302Z,1509674387.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T01:59:47.303Z,1509674387.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:47.672Z,1509674387.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:47.697Z,1509674387.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T01:59:47.698Z,1509674387.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:48.093Z,1509674388.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:48.107Z,1509674388.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T01:59:48.108Z,1509674388.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:48.265Z,1509674388.265 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T01:59:48.319Z,1509674388.319 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T01:59:48.321Z,1509674388.321 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T01:59:48.322Z,1509674388.322 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T01:59:48.322Z,1509674388.322 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T01:59:48.504Z,1509674388.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:48.522Z,1509674388.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T01:59:48.523Z,1509674388.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:48.883Z,1509674388.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:48.910Z,1509674388.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:49.278Z,1509674389.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:49.303Z,1509674389.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:49.674Z,1509674389.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:49.706Z,1509674389.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:50.070Z,1509674390.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:50.086Z,1509674390.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:50.473Z,1509674390.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:50.489Z,1509674390.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:50.874Z,1509674390.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:50.890Z,1509674390.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:51.286Z,1509674391.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:51.319Z,1509674391.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:51.689Z,1509674391.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:51.723Z,1509674391.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:52.122Z,1509674392.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:52.159Z,1509674392.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:52.473Z,1509674392.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:52.489Z,1509674392.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:52.876Z,1509674392.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:52.891Z,1509674392.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:53.273Z,1509674393.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:53.289Z,1509674393.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:53.675Z,1509674393.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:53.691Z,1509674393.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:54.124Z,1509674394.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:54.167Z,1509674394.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:54.539Z,1509674394.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:54.572Z,1509674394.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:54.890Z,1509674394.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:54.919Z,1509674394.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:55.276Z,1509674395.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:55.291Z,1509674395.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:55.676Z,1509674395.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:55.691Z,1509674395.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:56.106Z,1509674396.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:56.195Z,1509674396.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:56.477Z,1509674396.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:56.493Z,1509674396.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:56.876Z,1509674396.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:56.891Z,1509674396.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:57.290Z,1509674397.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:57.342Z,1509674397.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:57.689Z,1509674397.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:57.721Z,1509674397.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:58.130Z,1509674398.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:58.194Z,1509674398.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:58.476Z,1509674398.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:58.530Z,1509674398.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:58.875Z,1509674398.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:58.895Z,1509674398.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:59.276Z,1509674399.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:59.291Z,1509674399.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T01:59:59.680Z,1509674399.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T01:59:59.695Z,1509674399.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:00.114Z,1509674400.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:00.177Z,1509674400.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:00.489Z,1509674400.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:00.520Z,1509674400.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:00.882Z,1509674400.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:00.897Z,1509674400.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:01.275Z,1509674401.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:01.290Z,1509674401.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:01.675Z,1509674401.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:01.690Z,1509674401.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:02.076Z,1509674402.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:02.091Z,1509674402.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:02.488Z,1509674402.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:02.520Z,1509674402.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:02.876Z,1509674402.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:02.890Z,1509674402.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:03.282Z,1509674403.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:03.297Z,1509674403.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:03.689Z,1509674403.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:03.704Z,1509674403.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:04.093Z,1509674404.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:04.125Z,1509674404.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:04.480Z,1509674404.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:04.495Z,1509674404.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:04.878Z,1509674404.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:04.898Z,1509674404.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:05.280Z,1509674405.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:05.295Z,1509674405.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:05.679Z,1509674405.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:05.699Z,1509674405.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:06.085Z,1509674406.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:06.122Z,1509674406.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:06.493Z,1509674406.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:06.523Z,1509674406.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:06.902Z,1509674406.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:06.931Z,1509674406.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:07.282Z,1509674407.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:07.297Z,1509674407.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:07.681Z,1509674407.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:07.702Z,1509674407.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:08.102Z,1509674408.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:08.142Z,1509674408.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:08.479Z,1509674408.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:08.495Z,1509674408.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:08.882Z,1509674408.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:08.897Z,1509674408.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:09.288Z,1509674409.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:09.303Z,1509674409.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:09.687Z,1509674409.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:09.706Z,1509674409.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:10.100Z,1509674410.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:10.151Z,1509674410.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:10.480Z,1509674410.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:10.555Z,1509674410.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:10.882Z,1509674410.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:10.897Z,1509674410.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:11.284Z,1509674411.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:11.342Z,1509674411.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:11.680Z,1509674411.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:11.695Z,1509674411.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:12.111Z,1509674412.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:12.167Z,1509674412.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:12.493Z,1509674412.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:12.508Z,1509674412.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:12.892Z,1509674412.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:12.946Z,1509674412.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:13.280Z,1509674413.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:13.302Z,1509674413.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:13.684Z,1509674413.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:13.698Z,1509674413.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:14.116Z,1509674414.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:14.181Z,1509674414.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:14.480Z,1509674414.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:14.495Z,1509674414.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:14.880Z,1509674414.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:14.899Z,1509674414.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:15.292Z,1509674415.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:15.315Z,1509674415.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:15.655Z,1509674415.655 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T02:00:15.655Z,1509674415.655 [NAL9602] Data Fault, FailCount= 5
2017-11-03T02:00:15.656Z,1509674415.656 [NAL9602](ERROR): Data Fault
2017-11-03T02:00:15.688Z,1509674415.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:15.712Z,1509674415.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:15.809Z,1509674415.809 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T02:00:15.809Z,1509674415.809 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T02:00:16.058Z,1509674416.058 [NAL9602](INFO): Powering down
2017-11-03T02:00:16.089Z,1509674416.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:16.104Z,1509674416.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:16.183Z,1509674416.183 [CBIT](INFO): Critical error at 20171103T020015
2017-11-03T02:00:16.470Z,1509674416.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:16.496Z,1509674416.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:16.496Z,1509674416.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2017-11-03T02:00:16.496Z,1509674416.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:00:16.498Z,1509674416.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:16.498Z,1509674416.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2017-11-03T02:00:16.498Z,1509674416.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:00:16.500Z,1509674416.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:16.500Z,1509674416.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2017-11-03T02:00:16.501Z,1509674416.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:00:16.577Z,1509674416.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:00:16.577Z,1509674416.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:00:16.577Z,1509674416.577 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:00:16.870Z,1509674416.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:16.988Z,1509674416.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:00:16.989Z,1509674416.989 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2017-11-03T02:00:16.989Z,1509674416.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:00:16.989Z,1509674416.989 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2017-11-03T02:00:16.990Z,1509674416.990 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:00:16.990Z,1509674416.990 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2017-11-03T02:00:17.274Z,1509674417.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:17.297Z,1509674417.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:00:17.298Z,1509674417.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:00:17.298Z,1509674417.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:00:17.298Z,1509674417.298 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:00:17.299Z,1509674417.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:00:17.299Z,1509674417.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:00:17.299Z,1509674417.299 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:00:17.300Z,1509674417.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:00:17.300Z,1509674417.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:00:17.672Z,1509674417.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:17.707Z,1509674417.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:18.072Z,1509674418.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:18.105Z,1509674418.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:18.467Z,1509674418.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:18.482Z,1509674418.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:18.874Z,1509674418.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:18.905Z,1509674418.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:19.272Z,1509674419.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:19.307Z,1509674419.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:19.674Z,1509674419.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:19.705Z,1509674419.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:20.074Z,1509674420.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:20.105Z,1509674420.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:20.470Z,1509674420.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:20.503Z,1509674420.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:20.870Z,1509674420.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:20.887Z,1509674420.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:21.271Z,1509674421.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:21.287Z,1509674421.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:21.669Z,1509674421.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:21.691Z,1509674421.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:22.107Z,1509674422.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:22.142Z,1509674422.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:22.480Z,1509674422.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:22.496Z,1509674422.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:22.880Z,1509674422.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:22.895Z,1509674422.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:23.268Z,1509674423.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:23.298Z,1509674423.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:23.680Z,1509674423.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:23.695Z,1509674423.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:24.110Z,1509674424.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:24.141Z,1509674424.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:24.482Z,1509674424.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:24.515Z,1509674424.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:24.872Z,1509674424.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:24.903Z,1509674424.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:25.268Z,1509674425.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:25.315Z,1509674425.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:25.667Z,1509674425.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:25.702Z,1509674425.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:26.108Z,1509674426.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:26.155Z,1509674426.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:26.475Z,1509674426.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:26.501Z,1509674426.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:26.872Z,1509674426.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:26.923Z,1509674426.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:27.269Z,1509674427.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:27.335Z,1509674427.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:27.673Z,1509674427.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:27.706Z,1509674427.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:28.107Z,1509674428.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:28.172Z,1509674428.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:28.475Z,1509674428.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:28.502Z,1509674428.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:28.872Z,1509674428.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:28.898Z,1509674428.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:29.267Z,1509674429.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:29.302Z,1509674429.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:29.675Z,1509674429.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:29.701Z,1509674429.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:30.071Z,1509674430.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:30.098Z,1509674430.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:30.470Z,1509674430.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:30.497Z,1509674430.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:30.867Z,1509674430.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:30.899Z,1509674430.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:31.271Z,1509674431.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:31.301Z,1509674431.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:31.674Z,1509674431.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:31.707Z,1509674431.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:32.068Z,1509674432.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:32.098Z,1509674432.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:32.467Z,1509674432.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:32.482Z,1509674432.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:32.870Z,1509674432.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:32.905Z,1509674432.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:33.269Z,1509674433.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:33.284Z,1509674433.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:33.674Z,1509674433.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:33.711Z,1509674433.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:34.068Z,1509674434.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:34.083Z,1509674434.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:34.473Z,1509674434.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:34.488Z,1509674434.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:34.879Z,1509674434.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:34.912Z,1509674434.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:35.272Z,1509674435.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:35.287Z,1509674435.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:35.672Z,1509674435.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:35.687Z,1509674435.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:36.115Z,1509674436.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:36.131Z,1509674436.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:36.476Z,1509674436.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:36.492Z,1509674436.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:36.871Z,1509674436.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:36.887Z,1509674436.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:37.270Z,1509674437.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:37.288Z,1509674437.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:37.671Z,1509674437.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:37.685Z,1509674437.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:38.109Z,1509674438.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:38.136Z,1509674438.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:38.473Z,1509674438.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:38.488Z,1509674438.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:38.879Z,1509674438.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:38.893Z,1509674438.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:42.057Z,1509674442.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:42.179Z,1509674442.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:42.331Z,1509674442.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:42.367Z,1509674442.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:42.729Z,1509674442.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:42.743Z,1509674442.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:43.130Z,1509674443.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:43.179Z,1509674443.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:43.522Z,1509674443.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:43.537Z,1509674443.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:43.922Z,1509674443.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:43.972Z,1509674443.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:44.349Z,1509674444.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:44.403Z,1509674444.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:44.730Z,1509674444.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:44.745Z,1509674444.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:45.129Z,1509674445.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:45.150Z,1509674445.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:45.530Z,1509674445.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:45.545Z,1509674445.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:45.927Z,1509674445.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:45.943Z,1509674445.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:46.323Z,1509674446.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:46.337Z,1509674446.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:46.726Z,1509674446.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:46.741Z,1509674446.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:47.128Z,1509674447.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:47.151Z,1509674447.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:47.528Z,1509674447.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:47.543Z,1509674447.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:47.928Z,1509674447.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:47.943Z,1509674447.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:48.324Z,1509674448.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:48.339Z,1509674448.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:48.731Z,1509674448.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:48.746Z,1509674448.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:49.129Z,1509674449.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:49.144Z,1509674449.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:49.529Z,1509674449.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:49.543Z,1509674449.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:49.923Z,1509674449.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:49.938Z,1509674449.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:50.327Z,1509674450.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:50.342Z,1509674450.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:50.728Z,1509674450.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:50.743Z,1509674450.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:51.130Z,1509674451.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:51.145Z,1509674451.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:51.524Z,1509674451.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:51.540Z,1509674451.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:51.929Z,1509674451.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:51.945Z,1509674451.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:52.326Z,1509674452.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:52.346Z,1509674452.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:52.730Z,1509674452.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:52.745Z,1509674452.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:53.128Z,1509674453.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:53.143Z,1509674453.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:53.530Z,1509674453.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:53.545Z,1509674453.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:53.929Z,1509674453.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:53.945Z,1509674453.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:54.326Z,1509674454.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:54.343Z,1509674454.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:54.729Z,1509674454.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:54.745Z,1509674454.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:55.129Z,1509674455.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:55.144Z,1509674455.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:55.528Z,1509674455.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:55.551Z,1509674455.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:55.930Z,1509674455.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:55.945Z,1509674455.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:56.322Z,1509674456.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:56.391Z,1509674456.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:56.730Z,1509674456.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:56.744Z,1509674456.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:57.125Z,1509674457.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:57.163Z,1509674457.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:57.528Z,1509674457.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:57.543Z,1509674457.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:57.928Z,1509674457.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:57.975Z,1509674457.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:58.349Z,1509674458.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:58.400Z,1509674458.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:58.725Z,1509674458.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:58.742Z,1509674458.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:59.131Z,1509674459.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:59.150Z,1509674459.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:59.531Z,1509674459.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:59.545Z,1509674459.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:00:59.926Z,1509674459.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:00:59.941Z,1509674459.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:00.327Z,1509674460.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:00.342Z,1509674460.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:00.721Z,1509674460.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:00.737Z,1509674460.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:01.126Z,1509674461.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:01.143Z,1509674461.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:01.527Z,1509674461.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:01.543Z,1509674461.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:01.922Z,1509674461.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:01.937Z,1509674461.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:02.323Z,1509674462.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:02.338Z,1509674462.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:02.734Z,1509674462.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:02.774Z,1509674462.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:03.126Z,1509674463.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:03.140Z,1509674463.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:03.523Z,1509674463.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:03.538Z,1509674463.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:03.927Z,1509674463.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:03.979Z,1509674463.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:04.320Z,1509674464.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:04.375Z,1509674464.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:04.718Z,1509674464.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:04.751Z,1509674464.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:05.121Z,1509674465.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:05.168Z,1509674465.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:05.520Z,1509674465.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:05.563Z,1509674465.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:05.920Z,1509674465.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:05.959Z,1509674465.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:06.328Z,1509674466.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:06.343Z,1509674466.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:06.727Z,1509674466.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:06.756Z,1509674466.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:07.128Z,1509674467.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:07.159Z,1509674467.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:07.526Z,1509674467.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:07.546Z,1509674467.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:07.926Z,1509674467.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:07.962Z,1509674467.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:08.352Z,1509674468.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:08.390Z,1509674468.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:08.720Z,1509674468.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:08.757Z,1509674468.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:09.120Z,1509674469.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:09.163Z,1509674469.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:09.520Z,1509674469.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:09.598Z,1509674469.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:09.920Z,1509674469.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:09.957Z,1509674469.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:10.341Z,1509674470.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:10.374Z,1509674470.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:10.741Z,1509674470.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:10.912Z,1509674470.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:11.127Z,1509674471.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:11.173Z,1509674471.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:11.527Z,1509674471.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:11.578Z,1509674471.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:11.927Z,1509674471.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:11.981Z,1509674471.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:12.332Z,1509674472.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:12.411Z,1509674472.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:12.732Z,1509674472.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:12.799Z,1509674472.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:13.129Z,1509674473.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:13.161Z,1509674473.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:13.529Z,1509674473.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:13.555Z,1509674473.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:13.929Z,1509674473.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:13.948Z,1509674473.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:14.320Z,1509674474.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:14.370Z,1509674474.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:14.720Z,1509674474.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:14.774Z,1509674474.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:15.120Z,1509674475.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:15.163Z,1509674475.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:15.518Z,1509674475.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:15.549Z,1509674475.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:15.920Z,1509674475.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:15.935Z,1509674475.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:16.322Z,1509674476.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:16.359Z,1509674476.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:16.727Z,1509674476.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:16.755Z,1509674476.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:17.120Z,1509674477.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:17.135Z,1509674477.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:17.522Z,1509674477.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:17.559Z,1509674477.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:17.916Z,1509674477.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:17.931Z,1509674477.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:18.318Z,1509674478.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:18.355Z,1509674478.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:18.720Z,1509674478.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:18.735Z,1509674478.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:19.119Z,1509674479.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:19.134Z,1509674479.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:19.522Z,1509674479.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:19.559Z,1509674479.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:19.919Z,1509674479.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:19.933Z,1509674479.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:20.324Z,1509674480.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:20.339Z,1509674480.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:20.723Z,1509674480.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:20.743Z,1509674480.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:21.119Z,1509674481.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:21.133Z,1509674481.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:21.519Z,1509674481.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:21.535Z,1509674481.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:21.920Z,1509674481.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:21.935Z,1509674481.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:22.324Z,1509674482.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:22.339Z,1509674482.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:22.719Z,1509674482.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:22.735Z,1509674482.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:23.126Z,1509674483.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:23.163Z,1509674483.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:23.526Z,1509674483.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:23.541Z,1509674483.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:23.926Z,1509674483.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:23.965Z,1509674483.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:24.334Z,1509674484.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:24.363Z,1509674484.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:24.724Z,1509674484.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:24.782Z,1509674484.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:25.126Z,1509674485.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:25.171Z,1509674485.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:25.525Z,1509674485.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:25.540Z,1509674485.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:25.923Z,1509674485.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:25.963Z,1509674485.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:26.343Z,1509674486.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:26.383Z,1509674486.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:26.728Z,1509674486.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:26.787Z,1509674486.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:27.124Z,1509674487.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:27.166Z,1509674487.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:27.524Z,1509674487.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:27.539Z,1509674487.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:27.923Z,1509674487.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:27.947Z,1509674487.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:28.323Z,1509674488.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:28.338Z,1509674488.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:28.722Z,1509674488.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:28.738Z,1509674488.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:29.124Z,1509674489.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:29.143Z,1509674489.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:29.524Z,1509674489.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:29.539Z,1509674489.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:29.925Z,1509674489.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:29.940Z,1509674489.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:30.323Z,1509674490.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:30.338Z,1509674490.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:30.728Z,1509674490.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:30.743Z,1509674490.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:31.124Z,1509674491.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:31.139Z,1509674491.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:31.523Z,1509674491.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:31.538Z,1509674491.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:31.923Z,1509674491.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:31.939Z,1509674491.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:32.322Z,1509674492.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:32.338Z,1509674492.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:32.723Z,1509674492.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:32.738Z,1509674492.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:33.127Z,1509674493.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:33.143Z,1509674493.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:33.523Z,1509674493.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:33.538Z,1509674493.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:33.927Z,1509674493.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:33.942Z,1509674493.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:34.326Z,1509674494.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:34.341Z,1509674494.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:34.727Z,1509674494.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:34.742Z,1509674494.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:35.127Z,1509674495.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:35.142Z,1509674495.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:35.526Z,1509674495.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:35.545Z,1509674495.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:35.928Z,1509674495.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:35.943Z,1509674495.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:36.327Z,1509674496.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:36.346Z,1509674496.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:36.727Z,1509674496.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:36.743Z,1509674496.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:37.127Z,1509674497.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:37.142Z,1509674497.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:37.528Z,1509674497.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:37.543Z,1509674497.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:37.928Z,1509674497.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:37.943Z,1509674497.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:38.325Z,1509674498.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:38.347Z,1509674498.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:38.727Z,1509674498.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:38.736Z,1509674498.736 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T02:01:38.736Z,1509674498.736 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:01:38.736Z,1509674498.736 [BPC1](ERROR): Data Fault
2017-11-03T02:01:38.744Z,1509674498.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:38.817Z,1509674498.817 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:01:39.117Z,1509674499.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:39.151Z,1509674499.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:42.314Z,1509674502.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:42.329Z,1509674502.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:42.429Z,1509674502.429 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T02:01:42.462Z,1509674502.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:42.479Z,1509674502.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:42.571Z,1509674502.571 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:01:42.571Z,1509674502.571 [BPC1] No Fault, FailCount= 1
2017-11-03T02:01:42.865Z,1509674502.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:42.924Z,1509674502.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:43.263Z,1509674503.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:43.279Z,1509674503.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:43.667Z,1509674503.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:43.715Z,1509674503.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:44.064Z,1509674504.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:44.078Z,1509674504.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:44.464Z,1509674504.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:44.480Z,1509674504.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:44.508Z,1509674504.508 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:01:44.508Z,1509674504.508 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T02:01:44.508Z,1509674504.508 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:01:44.626Z,1509674504.626 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:01:44.866Z,1509674504.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:44.881Z,1509674504.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:01:44.882Z,1509674504.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:44.913Z,1509674504.913 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:01:45.010Z,1509674505.010 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:01:45.271Z,1509674505.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:45.288Z,1509674505.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:01:45.289Z,1509674505.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:45.664Z,1509674505.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:45.679Z,1509674505.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:01:45.680Z,1509674505.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:46.066Z,1509674506.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:46.081Z,1509674506.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:01:46.082Z,1509674506.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:46.462Z,1509674506.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:46.476Z,1509674506.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:01:46.477Z,1509674506.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:46.564Z,1509674506.564 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:01:46.565Z,1509674506.565 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T02:01:46.624Z,1509674506.624 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:01:46.625Z,1509674506.625 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:01:46.625Z,1509674506.625 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:01:46.625Z,1509674506.625 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:01:46.867Z,1509674506.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:46.882Z,1509674506.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:01:46.882Z,1509674506.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:47.263Z,1509674507.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:47.278Z,1509674507.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:01:47.278Z,1509674507.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:47.664Z,1509674507.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:47.678Z,1509674507.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:01:47.679Z,1509674507.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:48.073Z,1509674508.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:48.087Z,1509674508.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:01:48.088Z,1509674508.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:48.466Z,1509674508.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:48.481Z,1509674508.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:01:48.482Z,1509674508.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:48.861Z,1509674508.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:48.880Z,1509674508.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:01:48.881Z,1509674508.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:49.260Z,1509674509.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:49.275Z,1509674509.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:01:49.277Z,1509674509.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:49.663Z,1509674509.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:49.677Z,1509674509.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:01:49.678Z,1509674509.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:50.065Z,1509674510.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:50.094Z,1509674510.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:01:50.095Z,1509674510.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:50.464Z,1509674510.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:50.487Z,1509674510.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:01:50.488Z,1509674510.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:50.792Z,1509674510.792 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:01:50.870Z,1509674510.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:50.921Z,1509674510.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:01:50.922Z,1509674510.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:50.932Z,1509674510.932 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:01:50.933Z,1509674510.933 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:01:50.934Z,1509674510.934 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:01:50.935Z,1509674510.935 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:01:51.276Z,1509674511.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:51.315Z,1509674511.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:01:51.316Z,1509674511.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:51.706Z,1509674511.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:51.774Z,1509674511.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:52.070Z,1509674512.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:52.090Z,1509674512.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:52.469Z,1509674512.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:52.485Z,1509674512.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:52.873Z,1509674512.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:52.889Z,1509674512.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:53.273Z,1509674513.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:53.294Z,1509674513.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:53.671Z,1509674513.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:53.691Z,1509674513.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:54.072Z,1509674514.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:54.087Z,1509674514.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:54.472Z,1509674514.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:54.487Z,1509674514.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:54.877Z,1509674514.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:54.921Z,1509674514.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:55.275Z,1509674515.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:55.290Z,1509674515.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:55.672Z,1509674515.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:55.762Z,1509674515.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:56.070Z,1509674516.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:56.089Z,1509674516.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:56.474Z,1509674516.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:56.530Z,1509674516.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:56.867Z,1509674516.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:56.881Z,1509674516.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:57.279Z,1509674517.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:57.346Z,1509674517.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:57.673Z,1509674517.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:57.688Z,1509674517.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:58.070Z,1509674518.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:58.125Z,1509674518.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:58.471Z,1509674518.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:58.486Z,1509674518.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:58.873Z,1509674518.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:58.889Z,1509674518.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:59.269Z,1509674519.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:59.290Z,1509674519.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:01:59.673Z,1509674519.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:01:59.688Z,1509674519.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:00.067Z,1509674520.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:00.082Z,1509674520.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:00.467Z,1509674520.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:00.481Z,1509674520.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:00.871Z,1509674520.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:00.891Z,1509674520.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:01.267Z,1509674521.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:01.282Z,1509674521.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:01.671Z,1509674521.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:01.685Z,1509674521.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:02.064Z,1509674522.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:02.079Z,1509674522.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:02.459Z,1509674522.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:02.474Z,1509674522.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:02.871Z,1509674522.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:02.885Z,1509674522.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:03.270Z,1509674523.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:03.291Z,1509674523.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:03.672Z,1509674523.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:03.687Z,1509674523.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:04.067Z,1509674524.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:04.081Z,1509674524.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:04.473Z,1509674524.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:04.488Z,1509674524.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:04.871Z,1509674524.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:04.885Z,1509674524.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:05.309Z,1509674525.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:05.349Z,1509674525.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:05.670Z,1509674525.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:05.689Z,1509674525.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:06.074Z,1509674526.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:06.089Z,1509674526.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:06.467Z,1509674526.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:06.481Z,1509674526.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:06.866Z,1509674526.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:06.889Z,1509674526.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:07.264Z,1509674527.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:07.289Z,1509674527.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:07.678Z,1509674527.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:07.693Z,1509674527.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:08.064Z,1509674528.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:08.090Z,1509674528.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:08.473Z,1509674528.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:08.489Z,1509674528.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:08.874Z,1509674528.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:08.895Z,1509674528.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:09.274Z,1509674529.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:09.289Z,1509674529.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:09.679Z,1509674529.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:09.695Z,1509674529.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:10.074Z,1509674530.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:10.158Z,1509674530.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:10.464Z,1509674530.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:10.489Z,1509674530.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:10.867Z,1509674530.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:10.933Z,1509674530.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:11.262Z,1509674531.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:11.286Z,1509674531.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:11.664Z,1509674531.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:11.719Z,1509674531.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:12.066Z,1509674532.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:12.091Z,1509674532.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:12.463Z,1509674532.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:12.511Z,1509674532.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:12.864Z,1509674532.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:12.889Z,1509674532.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:13.262Z,1509674533.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:13.287Z,1509674533.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:13.666Z,1509674533.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:13.690Z,1509674533.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:14.067Z,1509674534.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:14.091Z,1509674534.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:14.463Z,1509674534.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:14.489Z,1509674534.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:14.859Z,1509674534.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:14.895Z,1509674534.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:15.282Z,1509674535.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:15.303Z,1509674535.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:15.666Z,1509674535.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:15.691Z,1509674535.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:15.784Z,1509674535.784 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T02:02:15.785Z,1509674535.785 [NAL9602] No Fault, FailCount= 5
2017-11-03T02:02:16.050Z,1509674536.050 [NAL9602](INFO): Powering up NAL9602
2017-11-03T02:02:16.068Z,1509674536.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:16.096Z,1509674536.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:16.467Z,1509674536.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:16.492Z,1509674536.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:16.860Z,1509674536.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:16.887Z,1509674536.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:17.282Z,1509674537.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:17.303Z,1509674537.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:17.668Z,1509674537.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:17.695Z,1509674537.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:18.066Z,1509674538.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:18.092Z,1509674538.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:18.460Z,1509674538.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:18.495Z,1509674538.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:18.867Z,1509674538.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:18.892Z,1509674538.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:19.266Z,1509674539.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:19.351Z,1509674539.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:19.664Z,1509674539.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:19.679Z,1509674539.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:20.067Z,1509674540.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:20.082Z,1509674540.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:20.468Z,1509674540.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:20.483Z,1509674540.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:20.869Z,1509674540.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:20.883Z,1509674540.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:21.267Z,1509674541.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:21.306Z,1509674541.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:21.672Z,1509674541.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:21.703Z,1509674541.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:22.073Z,1509674542.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:22.088Z,1509674542.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:22.467Z,1509674542.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:22.483Z,1509674542.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:22.871Z,1509674542.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:22.886Z,1509674542.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:23.268Z,1509674543.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:23.283Z,1509674543.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:23.679Z,1509674543.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:23.707Z,1509674543.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:24.068Z,1509674544.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:24.083Z,1509674544.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:24.470Z,1509674544.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:24.554Z,1509674544.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:24.864Z,1509674544.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:24.880Z,1509674544.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:25.270Z,1509674545.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:25.334Z,1509674545.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:25.670Z,1509674545.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:25.691Z,1509674545.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:26.063Z,1509674546.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:26.115Z,1509674546.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:26.471Z,1509674546.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:26.524Z,1509674546.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:26.881Z,1509674546.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:26.896Z,1509674546.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:27.255Z,1509674547.255 [NAL9602](INFO): NAL9602 initialized
2017-11-03T02:02:27.272Z,1509674547.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:27.295Z,1509674547.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:27.670Z,1509674547.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:27.689Z,1509674547.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:28.085Z,1509674548.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:28.100Z,1509674548.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:28.485Z,1509674548.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:28.517Z,1509674548.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:28.871Z,1509674548.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:28.886Z,1509674548.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:29.271Z,1509674549.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:29.290Z,1509674549.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:29.673Z,1509674549.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:29.688Z,1509674549.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:30.074Z,1509674550.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:30.089Z,1509674550.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:30.469Z,1509674550.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:30.484Z,1509674550.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:30.873Z,1509674550.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:30.895Z,1509674550.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:31.290Z,1509674551.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:31.321Z,1509674551.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:31.686Z,1509674551.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:31.722Z,1509674551.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:32.067Z,1509674552.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:32.082Z,1509674552.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:32.470Z,1509674552.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:32.485Z,1509674552.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:32.872Z,1509674552.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:32.887Z,1509674552.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:33.279Z,1509674553.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:33.371Z,1509674553.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:33.678Z,1509674553.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:33.693Z,1509674553.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:34.081Z,1509674554.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:34.096Z,1509674554.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:34.478Z,1509674554.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:34.493Z,1509674554.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:34.875Z,1509674554.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:34.895Z,1509674554.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:35.272Z,1509674555.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:35.294Z,1509674555.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:35.678Z,1509674555.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:35.699Z,1509674555.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:36.074Z,1509674556.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:36.089Z,1509674556.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:36.475Z,1509674556.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:36.490Z,1509674556.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:36.878Z,1509674556.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:36.893Z,1509674556.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:37.281Z,1509674557.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:37.296Z,1509674557.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:37.683Z,1509674557.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:37.719Z,1509674557.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:38.075Z,1509674558.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:38.090Z,1509674558.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:38.472Z,1509674558.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:38.558Z,1509674558.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:38.876Z,1509674558.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:38.891Z,1509674558.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:39.267Z,1509674559.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:39.282Z,1509674559.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:42.493Z,1509674562.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:42.539Z,1509674562.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:42.681Z,1509674562.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:42.722Z,1509674562.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:43.122Z,1509674563.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:43.182Z,1509674563.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:43.467Z,1509674563.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:43.526Z,1509674563.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:43.868Z,1509674563.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:43.884Z,1509674563.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:44.264Z,1509674564.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:44.287Z,1509674564.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:44.677Z,1509674564.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:44.693Z,1509674564.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:45.086Z,1509674565.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:45.146Z,1509674565.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:45.476Z,1509674565.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:45.499Z,1509674565.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:45.866Z,1509674565.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:45.881Z,1509674565.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:46.261Z,1509674566.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:46.283Z,1509674566.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:46.665Z,1509674566.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:46.680Z,1509674566.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:47.052Z,1509674567.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:47.080Z,1509674567.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:47.451Z,1509674567.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:47.478Z,1509674567.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:47.870Z,1509674567.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:47.885Z,1509674567.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:48.274Z,1509674568.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:48.289Z,1509674568.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:48.676Z,1509674568.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:48.691Z,1509674568.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:49.064Z,1509674569.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:49.087Z,1509674569.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:49.460Z,1509674569.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:49.484Z,1509674569.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:49.852Z,1509674569.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:49.877Z,1509674569.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:50.265Z,1509674570.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:50.287Z,1509674570.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:50.680Z,1509674570.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:50.697Z,1509674570.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:51.080Z,1509674571.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:51.096Z,1509674571.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:51.477Z,1509674571.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:51.499Z,1509674571.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:51.855Z,1509674571.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:51.882Z,1509674571.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:52.267Z,1509674572.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:52.287Z,1509674572.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:52.665Z,1509674572.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:52.680Z,1509674572.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:53.090Z,1509674573.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:53.135Z,1509674573.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:53.466Z,1509674573.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:53.487Z,1509674573.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:53.873Z,1509674573.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:53.888Z,1509674573.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:54.277Z,1509674574.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:54.293Z,1509674574.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:54.677Z,1509674574.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:54.692Z,1509674574.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:55.087Z,1509674575.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:55.130Z,1509674575.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:55.467Z,1509674575.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:55.507Z,1509674575.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:55.859Z,1509674575.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:55.911Z,1509674575.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:56.256Z,1509674576.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:56.285Z,1509674576.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:56.675Z,1509674576.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:56.730Z,1509674576.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:57.096Z,1509674577.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:57.131Z,1509674577.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:57.469Z,1509674577.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:57.518Z,1509674577.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:57.856Z,1509674577.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:57.910Z,1509674577.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:58.255Z,1509674578.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:58.271Z,1509674578.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:58.655Z,1509674578.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:58.670Z,1509674578.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:59.056Z,1509674579.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:59.130Z,1509674579.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:59.460Z,1509674579.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:59.479Z,1509674579.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:02:59.865Z,1509674579.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:02:59.880Z,1509674579.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:00.273Z,1509674580.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:00.304Z,1509674580.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:00.665Z,1509674580.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:00.681Z,1509674580.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:01.063Z,1509674581.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:01.078Z,1509674581.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:01.463Z,1509674581.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:01.478Z,1509674581.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:01.865Z,1509674581.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:01.880Z,1509674581.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:02.263Z,1509674582.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:02.278Z,1509674582.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:02.669Z,1509674582.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:02.706Z,1509674582.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:03.077Z,1509674583.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:03.105Z,1509674583.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:03.477Z,1509674583.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:03.505Z,1509674583.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:03.858Z,1509674583.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:03.885Z,1509674583.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:04.264Z,1509674584.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:04.279Z,1509674584.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:04.664Z,1509674584.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:04.686Z,1509674584.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:05.069Z,1509674585.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:05.084Z,1509674585.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:05.466Z,1509674585.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:05.487Z,1509674585.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:05.874Z,1509674585.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:05.889Z,1509674585.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:06.277Z,1509674586.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:06.292Z,1509674586.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:06.676Z,1509674586.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:06.691Z,1509674586.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:07.091Z,1509674587.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:07.126Z,1509674587.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:07.466Z,1509674587.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:07.481Z,1509674587.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:07.866Z,1509674587.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:07.881Z,1509674587.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:08.264Z,1509674588.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:08.279Z,1509674588.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:08.677Z,1509674588.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:08.692Z,1509674588.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:09.096Z,1509674589.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:09.132Z,1509674589.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:09.476Z,1509674589.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:09.491Z,1509674589.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:09.868Z,1509674589.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:09.926Z,1509674589.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:10.260Z,1509674590.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:10.335Z,1509674590.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:10.664Z,1509674590.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:10.686Z,1509674590.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:11.098Z,1509674591.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:11.139Z,1509674591.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:11.464Z,1509674591.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:11.519Z,1509674591.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:11.876Z,1509674591.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:11.891Z,1509674591.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:12.277Z,1509674592.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:12.327Z,1509674592.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:12.676Z,1509674592.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:12.730Z,1509674592.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:13.064Z,1509674593.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:13.169Z,1509674593.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:13.468Z,1509674593.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:13.483Z,1509674593.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:13.861Z,1509674593.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:13.877Z,1509674593.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:14.264Z,1509674594.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:14.279Z,1509674594.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:14.677Z,1509674594.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:14.693Z,1509674594.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:15.074Z,1509674595.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:15.089Z,1509674595.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:15.475Z,1509674595.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:15.490Z,1509674595.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:15.869Z,1509674595.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:15.884Z,1509674595.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:16.267Z,1509674596.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:16.287Z,1509674596.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:16.666Z,1509674596.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:16.681Z,1509674596.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:17.069Z,1509674597.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:17.091Z,1509674597.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:17.464Z,1509674597.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:17.479Z,1509674597.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:17.480Z,1509674597.480 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2017-11-03T02:03:17.480Z,1509674597.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:03:17.482Z,1509674597.482 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:17.482Z,1509674597.482 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2017-11-03T02:03:17.482Z,1509674597.482 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:03:17.483Z,1509674597.483 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:17.484Z,1509674597.484 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2017-11-03T02:03:17.484Z,1509674597.484 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:03:17.575Z,1509674597.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:03:17.576Z,1509674597.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:03:17.576Z,1509674597.576 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:03:17.872Z,1509674597.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:17.960Z,1509674597.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:03:17.960Z,1509674597.960 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2017-11-03T02:03:17.961Z,1509674597.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:03:17.961Z,1509674597.961 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2017-11-03T02:03:17.961Z,1509674597.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:03:17.961Z,1509674597.961 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2017-11-03T02:03:18.273Z,1509674598.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:18.287Z,1509674598.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:03:18.288Z,1509674598.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:03:18.288Z,1509674598.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:03:18.289Z,1509674598.289 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:03:18.289Z,1509674598.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:03:18.289Z,1509674598.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:03:18.290Z,1509674598.290 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:03:18.290Z,1509674598.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:03:18.290Z,1509674598.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:03:18.670Z,1509674598.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:18.692Z,1509674598.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:19.068Z,1509674599.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:19.083Z,1509674599.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:19.452Z,1509674599.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:19.488Z,1509674599.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:19.856Z,1509674599.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:19.886Z,1509674599.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:20.267Z,1509674600.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:20.290Z,1509674600.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:20.682Z,1509674600.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:20.697Z,1509674600.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:21.114Z,1509674601.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:21.143Z,1509674601.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:21.478Z,1509674601.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:21.499Z,1509674601.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:21.868Z,1509674601.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:21.884Z,1509674601.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:22.266Z,1509674602.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:22.282Z,1509674602.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:22.667Z,1509674602.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:22.682Z,1509674602.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:23.094Z,1509674603.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:23.136Z,1509674603.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:23.465Z,1509674603.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:23.481Z,1509674603.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:23.870Z,1509674603.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:23.900Z,1509674603.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:24.282Z,1509674604.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:24.303Z,1509674604.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:24.680Z,1509674604.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:24.751Z,1509674604.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:25.101Z,1509674605.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:25.143Z,1509674605.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:25.467Z,1509674605.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:25.483Z,1509674605.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:25.856Z,1509674605.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:25.918Z,1509674605.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:26.265Z,1509674606.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:26.283Z,1509674606.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:26.680Z,1509674606.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:26.731Z,1509674606.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:27.094Z,1509674607.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:27.181Z,1509674607.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:27.476Z,1509674607.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:27.492Z,1509674607.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:27.867Z,1509674607.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:27.883Z,1509674607.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:28.264Z,1509674608.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:28.287Z,1509674608.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:28.665Z,1509674608.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:28.686Z,1509674608.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:29.069Z,1509674609.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:29.084Z,1509674609.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:29.455Z,1509674609.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:29.480Z,1509674609.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:29.876Z,1509674609.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:29.891Z,1509674609.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:30.280Z,1509674610.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:30.295Z,1509674610.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:30.669Z,1509674610.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:30.684Z,1509674610.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:31.055Z,1509674611.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:31.090Z,1509674611.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:31.452Z,1509674611.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:31.467Z,1509674611.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:31.855Z,1509674611.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:31.891Z,1509674611.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:32.259Z,1509674612.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:32.274Z,1509674612.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:32.673Z,1509674612.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:32.700Z,1509674612.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:33.073Z,1509674613.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:33.107Z,1509674613.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:33.469Z,1509674613.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:33.502Z,1509674613.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:33.859Z,1509674613.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:33.883Z,1509674613.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:34.256Z,1509674614.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:34.295Z,1509674614.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:34.663Z,1509674614.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:34.678Z,1509674614.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:35.108Z,1509674615.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:35.145Z,1509674615.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:35.455Z,1509674615.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:35.474Z,1509674615.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:35.869Z,1509674615.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:35.900Z,1509674615.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:36.277Z,1509674616.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:36.304Z,1509674616.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:36.669Z,1509674616.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:36.700Z,1509674616.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:37.101Z,1509674617.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:37.127Z,1509674617.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:37.463Z,1509674617.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:37.478Z,1509674617.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:37.860Z,1509674617.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:37.875Z,1509674617.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:38.259Z,1509674618.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:38.274Z,1509674618.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:38.278Z,1509674618.278 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T01:58:37.9Z
2017-11-03T02:03:38.278Z,1509674618.278 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T02:03:38.278Z,1509674618.278 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T02:03:38.669Z,1509674618.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:38.704Z,1509674618.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:39.246Z,1509674619.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:39.320Z,1509674619.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:39.482Z,1509674619.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:39.515Z,1509674619.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:42.726Z,1509674622.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:42.771Z,1509674622.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:42.873Z,1509674622.873 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171103T001125/Courier0044.lzma
2017-11-03T02:03:42.912Z,1509674622.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:42.935Z,1509674622.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:43.351Z,1509674623.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:43.414Z,1509674623.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:43.674Z,1509674623.674 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0044.lzma.bak
2017-11-03T02:03:43.675Z,1509674623.675 [DataOverHttps](INFO): SBD MOMSN=5182444
2017-11-03T02:03:43.723Z,1509674623.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:43.775Z,1509674623.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:44.305Z,1509674624.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:44.327Z,1509674624.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:44.505Z,1509674624.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:44.522Z,1509674624.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:47.216Z,1509674627.216 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:03:47.216Z,1509674627.216 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T02:03:47.216Z,1509674627.216 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:03:47.621Z,1509674627.621 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:03:47.784Z,1509674627.784 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:03:47.924Z,1509674627.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:47.961Z,1509674627.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T02:03:47.962Z,1509674627.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:48.049Z,1509674628.049 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:03:48.085Z,1509674628.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:48.129Z,1509674628.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:03:48.129Z,1509674628.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:48.504Z,1509674628.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:48.521Z,1509674628.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:03:48.522Z,1509674628.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:48.905Z,1509674628.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:48.939Z,1509674628.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:03:48.939Z,1509674628.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:49.064Z,1509674629.064 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:03:49.065Z,1509674629.065 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T02:03:49.302Z,1509674629.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:49.317Z,1509674629.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:03:49.318Z,1509674629.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:49.401Z,1509674629.401 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:03:49.401Z,1509674629.401 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:03:49.401Z,1509674629.401 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:03:49.401Z,1509674629.401 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:03:49.688Z,1509674629.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:49.714Z,1509674629.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:03:49.715Z,1509674629.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:52.789Z,1509674632.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:52.829Z,1509674632.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-03T02:03:52.830Z,1509674632.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:52.929Z,1509674632.929 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20171103T001125/Express0045.lzma
2017-11-03T02:03:52.963Z,1509674632.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:52.986Z,1509674632.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T02:03:52.987Z,1509674632.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:53.369Z,1509674633.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:53.390Z,1509674633.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T02:03:53.391Z,1509674633.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:53.549Z,1509674633.549 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:03:53.607Z,1509674633.607 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:03:53.608Z,1509674633.608 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:03:53.609Z,1509674633.609 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:03:53.610Z,1509674633.610 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:03:53.727Z,1509674633.727 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0045.lzma.bak
2017-11-03T02:03:53.727Z,1509674633.727 [DataOverHttps](INFO): SBD MOMSN=5182447
2017-11-03T02:03:53.774Z,1509674633.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:53.807Z,1509674633.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T02:03:53.808Z,1509674633.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:54.370Z,1509674634.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:54.386Z,1509674634.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:54.389Z,1509674634.389 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T02:03:54.389Z,1509674634.389 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T02:03:54.389Z,1509674634.389 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T02:03:54.548Z,1509674634.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:54.579Z,1509674634.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:57.683Z,1509674637.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:57.754Z,1509674637.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:57.885Z,1509674637.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:57.924Z,1509674637.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:58.288Z,1509674638.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:58.304Z,1509674638.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:58.689Z,1509674638.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:58.728Z,1509674638.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:59.091Z,1509674639.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:59.111Z,1509674639.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:59.476Z,1509674639.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:59.531Z,1509674639.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:03:59.883Z,1509674639.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:03:59.918Z,1509674639.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:00.296Z,1509674640.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:00.354Z,1509674640.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:00.687Z,1509674640.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:00.716Z,1509674640.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:01.090Z,1509674641.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:01.105Z,1509674641.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:01.488Z,1509674641.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:01.505Z,1509674641.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:01.883Z,1509674641.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:01.899Z,1509674641.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:02.279Z,1509674642.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:02.294Z,1509674642.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:02.684Z,1509674642.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:02.699Z,1509674642.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:03.098Z,1509674643.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:03.138Z,1509674643.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:03.468Z,1509674643.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:03.494Z,1509674643.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:03.890Z,1509674643.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:03.905Z,1509674643.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:04.293Z,1509674644.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:04.308Z,1509674644.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:04.693Z,1509674644.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:04.707Z,1509674644.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:05.103Z,1509674645.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:05.137Z,1509674645.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:05.471Z,1509674645.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:05.503Z,1509674645.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:05.882Z,1509674645.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:05.898Z,1509674645.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:06.282Z,1509674646.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:06.299Z,1509674646.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:06.693Z,1509674646.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:06.709Z,1509674646.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:07.114Z,1509674647.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:07.143Z,1509674647.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:07.489Z,1509674647.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:07.518Z,1509674647.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:07.880Z,1509674647.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:07.902Z,1509674647.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:08.283Z,1509674648.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:08.298Z,1509674648.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:08.690Z,1509674648.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:08.711Z,1509674648.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:09.113Z,1509674649.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:09.147Z,1509674649.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:09.533Z,1509674649.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:09.594Z,1509674649.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:09.893Z,1509674649.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:09.908Z,1509674649.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:10.293Z,1509674650.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:10.308Z,1509674650.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:10.696Z,1509674650.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:10.751Z,1509674650.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:11.072Z,1509674651.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:11.171Z,1509674651.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:11.479Z,1509674651.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:11.518Z,1509674651.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:11.876Z,1509674651.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:11.915Z,1509674651.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:12.299Z,1509674652.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:12.323Z,1509674652.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:12.689Z,1509674652.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:12.744Z,1509674652.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:13.089Z,1509674653.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:13.163Z,1509674653.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:13.489Z,1509674653.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:13.535Z,1509674653.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:13.879Z,1509674653.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:13.899Z,1509674653.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:14.277Z,1509674654.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:14.320Z,1509674654.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:14.676Z,1509674654.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:14.730Z,1509674654.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:15.076Z,1509674655.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:15.091Z,1509674655.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:15.475Z,1509674655.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:15.495Z,1509674655.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:15.889Z,1509674655.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:15.919Z,1509674655.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:16.289Z,1509674656.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:16.320Z,1509674656.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:16.693Z,1509674656.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:16.719Z,1509674656.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:17.072Z,1509674657.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:17.087Z,1509674657.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:17.475Z,1509674657.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:17.491Z,1509674657.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:17.884Z,1509674657.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:17.920Z,1509674657.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:18.272Z,1509674658.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:18.287Z,1509674658.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:18.689Z,1509674658.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:18.721Z,1509674658.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:19.122Z,1509674659.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:19.136Z,1509674659.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:19.478Z,1509674659.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:19.493Z,1509674659.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:19.872Z,1509674659.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:19.887Z,1509674659.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:20.280Z,1509674660.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:20.295Z,1509674660.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:20.676Z,1509674660.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:20.699Z,1509674660.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:21.112Z,1509674661.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:21.141Z,1509674661.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:21.476Z,1509674661.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:21.491Z,1509674661.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:21.889Z,1509674661.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:21.924Z,1509674661.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:22.289Z,1509674662.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:22.321Z,1509674662.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:22.693Z,1509674662.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:22.723Z,1509674662.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:23.114Z,1509674663.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:23.146Z,1509674663.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:23.480Z,1509674663.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:23.502Z,1509674663.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:23.881Z,1509674663.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:23.897Z,1509674663.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:24.280Z,1509674664.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:24.295Z,1509674664.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:24.685Z,1509674664.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:24.701Z,1509674664.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:25.116Z,1509674665.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:25.151Z,1509674665.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:25.494Z,1509674665.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:25.551Z,1509674665.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:25.880Z,1509674665.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:25.895Z,1509674665.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:26.280Z,1509674666.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:26.295Z,1509674666.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:26.676Z,1509674666.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:26.691Z,1509674666.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:27.080Z,1509674667.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:27.142Z,1509674667.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:27.479Z,1509674667.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:27.494Z,1509674667.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:27.888Z,1509674667.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:27.903Z,1509674667.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:28.288Z,1509674668.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:28.342Z,1509674668.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:28.689Z,1509674668.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:28.704Z,1509674668.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:29.076Z,1509674669.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:29.131Z,1509674669.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:29.480Z,1509674669.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:29.538Z,1509674669.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:29.872Z,1509674669.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:29.906Z,1509674669.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:30.275Z,1509674670.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:30.301Z,1509674670.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:30.691Z,1509674670.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:30.711Z,1509674670.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:31.098Z,1509674671.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:31.113Z,1509674671.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:31.489Z,1509674671.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:31.504Z,1509674671.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:31.882Z,1509674671.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:31.897Z,1509674671.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:32.281Z,1509674672.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:32.296Z,1509674672.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:32.677Z,1509674672.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:32.693Z,1509674672.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:33.100Z,1509674673.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:33.135Z,1509674673.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:33.477Z,1509674673.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:33.492Z,1509674673.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:33.889Z,1509674673.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:33.919Z,1509674673.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:34.289Z,1509674674.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:34.322Z,1509674674.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:34.689Z,1509674674.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:34.720Z,1509674674.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:35.123Z,1509674675.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:35.138Z,1509674675.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:35.477Z,1509674675.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:35.492Z,1509674675.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:35.877Z,1509674675.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:35.893Z,1509674675.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:36.277Z,1509674676.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:36.292Z,1509674676.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:36.690Z,1509674676.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:36.721Z,1509674676.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:37.131Z,1509674677.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:37.149Z,1509674677.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:37.491Z,1509674677.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:37.522Z,1509674677.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:37.874Z,1509674677.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:37.907Z,1509674677.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:38.282Z,1509674678.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:38.298Z,1509674678.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:38.682Z,1509674678.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:38.698Z,1509674678.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:39.089Z,1509674679.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:39.157Z,1509674679.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:39.484Z,1509674679.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:39.503Z,1509674679.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:39.888Z,1509674679.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:39.954Z,1509674679.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:40.293Z,1509674680.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:40.309Z,1509674680.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:40.697Z,1509674680.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:40.715Z,1509674680.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:41.075Z,1509674681.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:41.106Z,1509674681.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:41.475Z,1509674681.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:41.551Z,1509674681.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:41.870Z,1509674681.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:41.908Z,1509674681.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:42.276Z,1509674682.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:42.346Z,1509674682.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:42.694Z,1509674682.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:42.709Z,1509674682.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:43.095Z,1509674683.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:43.136Z,1509674683.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:43.494Z,1509674683.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:43.552Z,1509674683.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:43.877Z,1509674683.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:43.908Z,1509674683.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:44.272Z,1509674684.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:44.288Z,1509674684.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:44.675Z,1509674684.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:44.691Z,1509674684.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:45.079Z,1509674685.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:45.112Z,1509674685.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:45.471Z,1509674685.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:45.486Z,1509674685.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:45.900Z,1509674685.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:45.915Z,1509674685.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:46.285Z,1509674686.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:46.311Z,1509674686.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:46.685Z,1509674686.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:46.711Z,1509674686.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:47.117Z,1509674687.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:47.135Z,1509674687.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:47.472Z,1509674687.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:47.487Z,1509674687.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:47.872Z,1509674687.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:47.887Z,1509674687.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:48.272Z,1509674688.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:48.288Z,1509674688.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:48.686Z,1509674688.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:48.709Z,1509674688.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:49.123Z,1509674689.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:49.150Z,1509674689.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:49.486Z,1509674689.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:49.501Z,1509674689.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:49.878Z,1509674689.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:49.894Z,1509674689.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:50.280Z,1509674690.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:50.294Z,1509674690.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:50.680Z,1509674690.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:50.695Z,1509674690.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:51.103Z,1509674691.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:51.145Z,1509674691.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:51.480Z,1509674691.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:51.494Z,1509674691.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:51.894Z,1509674691.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:51.922Z,1509674691.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:52.285Z,1509674692.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:52.301Z,1509674692.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:52.693Z,1509674692.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:52.722Z,1509674692.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:53.098Z,1509674693.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:53.150Z,1509674693.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:53.478Z,1509674693.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:53.497Z,1509674693.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:53.881Z,1509674693.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:53.896Z,1509674693.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:54.280Z,1509674694.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:54.303Z,1509674694.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:54.693Z,1509674694.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:54.743Z,1509674694.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:55.093Z,1509674695.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:55.124Z,1509674695.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:58.272Z,1509674698.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:58.342Z,1509674698.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:58.453Z,1509674698.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:58.495Z,1509674698.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:58.870Z,1509674698.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:58.885Z,1509674698.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:59.267Z,1509674699.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:59.322Z,1509674699.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:04:59.687Z,1509674699.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:04:59.725Z,1509674699.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:00.082Z,1509674700.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:00.121Z,1509674700.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:00.475Z,1509674700.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:00.523Z,1509674700.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:00.869Z,1509674700.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:00.884Z,1509674700.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:01.255Z,1509674701.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:01.282Z,1509674701.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:01.665Z,1509674701.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:01.691Z,1509674701.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:02.068Z,1509674702.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:02.091Z,1509674702.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:02.467Z,1509674702.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:02.483Z,1509674702.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:02.873Z,1509674702.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:02.889Z,1509674702.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:03.277Z,1509674703.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:03.293Z,1509674703.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:03.680Z,1509674703.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:03.696Z,1509674703.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:04.066Z,1509674704.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:04.087Z,1509674704.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:04.465Z,1509674704.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:04.487Z,1509674704.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:04.872Z,1509674704.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:04.886Z,1509674704.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:05.265Z,1509674705.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:05.286Z,1509674705.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:05.678Z,1509674705.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:05.693Z,1509674705.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:06.072Z,1509674706.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:06.087Z,1509674706.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:06.477Z,1509674706.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:06.492Z,1509674706.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:06.866Z,1509674706.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:06.886Z,1509674706.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:07.256Z,1509674707.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:07.283Z,1509674707.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:07.666Z,1509674707.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:07.687Z,1509674707.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:08.067Z,1509674708.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:08.083Z,1509674708.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:08.471Z,1509674708.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:08.490Z,1509674708.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:08.877Z,1509674708.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:08.892Z,1509674708.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:09.314Z,1509674709.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:09.350Z,1509674709.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:09.669Z,1509674709.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:09.704Z,1509674709.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:10.059Z,1509674710.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:10.079Z,1509674710.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:10.460Z,1509674710.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:10.476Z,1509674710.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:10.864Z,1509674710.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:10.878Z,1509674710.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:11.260Z,1509674711.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:11.326Z,1509674711.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:11.672Z,1509674711.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:11.688Z,1509674711.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:12.077Z,1509674712.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:12.108Z,1509674712.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:12.511Z,1509674712.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:12.530Z,1509674712.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:12.864Z,1509674712.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:12.922Z,1509674712.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:13.265Z,1509674713.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:13.280Z,1509674713.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:13.669Z,1509674713.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:13.718Z,1509674713.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:14.064Z,1509674714.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:14.079Z,1509674714.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:14.463Z,1509674714.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:14.510Z,1509674714.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:14.881Z,1509674714.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:14.930Z,1509674714.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:15.277Z,1509674715.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:15.313Z,1509674715.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:15.669Z,1509674715.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:15.690Z,1509674715.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:16.064Z,1509674716.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:16.079Z,1509674716.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:16.467Z,1509674716.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:16.483Z,1509674716.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:16.864Z,1509674716.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:16.879Z,1509674716.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:17.268Z,1509674717.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:17.283Z,1509674717.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:17.677Z,1509674717.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:17.709Z,1509674717.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:18.081Z,1509674718.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:18.110Z,1509674718.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:18.478Z,1509674718.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:18.509Z,1509674718.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:18.863Z,1509674718.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:18.883Z,1509674718.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:19.263Z,1509674719.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:19.282Z,1509674719.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:19.667Z,1509674719.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:19.683Z,1509674719.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:20.065Z,1509674720.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:20.080Z,1509674720.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:20.461Z,1509674720.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:20.475Z,1509674720.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:20.869Z,1509674720.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:20.885Z,1509674720.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:21.269Z,1509674721.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:21.285Z,1509674721.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:21.678Z,1509674721.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:21.710Z,1509674721.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:22.063Z,1509674722.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:22.078Z,1509674722.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:22.464Z,1509674722.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:22.479Z,1509674722.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:22.868Z,1509674722.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:22.883Z,1509674722.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:23.279Z,1509674723.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:23.334Z,1509674723.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:23.672Z,1509674723.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:23.687Z,1509674723.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:24.073Z,1509674724.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:24.094Z,1509674724.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:24.474Z,1509674724.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:24.495Z,1509674724.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:24.866Z,1509674724.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:24.883Z,1509674724.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:25.265Z,1509674725.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:25.280Z,1509674725.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:25.673Z,1509674725.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:25.733Z,1509674725.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:26.069Z,1509674726.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:26.085Z,1509674726.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:26.468Z,1509674726.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:26.483Z,1509674726.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:26.873Z,1509674726.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:26.888Z,1509674726.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:27.272Z,1509674727.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:27.334Z,1509674727.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:27.679Z,1509674727.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:27.699Z,1509674727.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:28.066Z,1509674728.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:28.123Z,1509674728.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:28.464Z,1509674728.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:28.479Z,1509674728.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:28.865Z,1509674728.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:28.924Z,1509674728.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:29.267Z,1509674729.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:29.323Z,1509674729.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:29.677Z,1509674729.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:29.692Z,1509674729.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:30.078Z,1509674730.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:30.093Z,1509674730.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:30.477Z,1509674730.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:30.492Z,1509674730.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:30.868Z,1509674730.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:30.884Z,1509674730.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:31.274Z,1509674731.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:31.289Z,1509674731.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:31.661Z,1509674731.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:31.684Z,1509674731.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:32.058Z,1509674732.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:32.084Z,1509674732.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:32.456Z,1509674732.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:32.484Z,1509674732.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:32.878Z,1509674732.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:32.893Z,1509674732.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:33.284Z,1509674733.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:33.300Z,1509674733.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:33.679Z,1509674733.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:33.699Z,1509674733.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:34.055Z,1509674734.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:34.081Z,1509674734.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:34.458Z,1509674734.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:34.484Z,1509674734.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:34.857Z,1509674734.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:34.884Z,1509674734.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:35.276Z,1509674735.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:35.299Z,1509674735.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:35.678Z,1509674735.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:35.693Z,1509674735.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:36.078Z,1509674736.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:36.098Z,1509674736.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:36.478Z,1509674736.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:36.494Z,1509674736.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:36.854Z,1509674736.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:36.885Z,1509674736.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:37.263Z,1509674737.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:37.345Z,1509674737.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:37.661Z,1509674737.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:37.677Z,1509674737.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:38.061Z,1509674738.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:38.076Z,1509674738.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:38.456Z,1509674738.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:38.471Z,1509674738.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:38.878Z,1509674738.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:38.907Z,1509674738.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:39.274Z,1509674739.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:39.303Z,1509674739.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:39.689Z,1509674739.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:39.730Z,1509674739.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:40.060Z,1509674740.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:40.076Z,1509674740.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:40.464Z,1509674740.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:40.480Z,1509674740.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:40.863Z,1509674740.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:40.880Z,1509674740.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:41.259Z,1509674741.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:41.330Z,1509674741.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:41.674Z,1509674741.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:41.707Z,1509674741.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:42.074Z,1509674742.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:42.090Z,1509674742.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:42.470Z,1509674742.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:42.519Z,1509674742.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:42.865Z,1509674742.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:42.880Z,1509674742.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:43.263Z,1509674743.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:43.315Z,1509674743.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:43.668Z,1509674743.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:43.722Z,1509674743.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:44.065Z,1509674744.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:44.081Z,1509674744.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:44.464Z,1509674744.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:44.479Z,1509674744.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:44.870Z,1509674744.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:44.885Z,1509674744.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:45.269Z,1509674745.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:45.291Z,1509674745.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:45.670Z,1509674745.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:45.685Z,1509674745.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:46.064Z,1509674746.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:46.079Z,1509674746.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:46.464Z,1509674746.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:46.483Z,1509674746.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:46.868Z,1509674746.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:46.883Z,1509674746.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:47.263Z,1509674747.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:47.279Z,1509674747.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:47.669Z,1509674747.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:47.685Z,1509674747.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:48.073Z,1509674748.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:48.088Z,1509674748.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:48.470Z,1509674748.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:48.490Z,1509674748.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:48.865Z,1509674748.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:48.880Z,1509674748.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:49.263Z,1509674749.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:49.278Z,1509674749.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:49.660Z,1509674749.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:49.675Z,1509674749.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:49.928Z,1509674749.928 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:05:49.928Z,1509674749.928 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T02:05:49.928Z,1509674749.928 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:05:50.060Z,1509674750.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:50.094Z,1509674750.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:05:50.095Z,1509674750.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:50.189Z,1509674750.189 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:05:50.189Z,1509674750.189 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T02:05:50.332Z,1509674750.332 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:05:50.420Z,1509674750.420 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:05:50.472Z,1509674750.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:50.489Z,1509674750.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:05:50.490Z,1509674750.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:50.873Z,1509674750.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:50.888Z,1509674750.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:05:50.889Z,1509674750.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:51.273Z,1509674751.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:51.288Z,1509674751.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:05:51.289Z,1509674751.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:51.673Z,1509674751.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:51.694Z,1509674751.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:05:51.695Z,1509674751.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:52.066Z,1509674752.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:52.081Z,1509674752.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:05:52.082Z,1509674752.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:52.465Z,1509674752.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:52.480Z,1509674752.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:05:52.481Z,1509674752.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:52.910Z,1509674752.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:52.938Z,1509674752.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-03T02:05:52.939Z,1509674752.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:53.287Z,1509674753.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:53.326Z,1509674753.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T02:05:53.327Z,1509674753.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:53.680Z,1509674753.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:53.703Z,1509674753.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:05:53.704Z,1509674753.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:54.071Z,1509674754.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:54.118Z,1509674754.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:05:54.119Z,1509674754.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:54.468Z,1509674754.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:54.546Z,1509674754.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T02:05:54.547Z,1509674754.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:54.880Z,1509674754.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:54.918Z,1509674754.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:05:54.919Z,1509674754.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:05:55.266Z,1509674755.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:05:55.282Z,1509674755.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:05:55.283Z,1509674755.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:00.852Z,1509674760.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:00.870Z,1509674760.870 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:06:00.870Z,1509674760.870 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:06:00.870Z,1509674760.870 [BPC1](ERROR): Communications Fault
2017-11-03T02:06:00.878Z,1509674760.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:06:00.879Z,1509674760.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:01.001Z,1509674761.001 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:06:01.054Z,1509674761.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:01.095Z,1509674761.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T02:06:01.096Z,1509674761.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:01.451Z,1509674761.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:01.471Z,1509674761.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T02:06:01.471Z,1509674761.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:01.855Z,1509674761.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:01.908Z,1509674761.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T02:06:01.917Z,1509674761.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:02.017Z,1509674762.017 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:06:02.017Z,1509674762.017 [BPC1] No Fault, FailCount= 1
2017-11-03T02:06:02.250Z,1509674762.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:02.314Z,1509674762.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T02:06:02.315Z,1509674762.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:02.632Z,1509674762.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:02.671Z,1509674762.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T02:06:02.672Z,1509674762.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:03.040Z,1509674763.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:03.058Z,1509674763.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T02:06:03.059Z,1509674763.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:03.437Z,1509674763.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:03.458Z,1509674763.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T02:06:03.459Z,1509674763.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:03.853Z,1509674763.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:03.874Z,1509674763.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T02:06:03.875Z,1509674763.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:04.253Z,1509674764.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:04.279Z,1509674764.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T02:06:04.280Z,1509674764.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:04.649Z,1509674764.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:04.664Z,1509674764.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T02:06:04.665Z,1509674764.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:05.036Z,1509674765.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:05.050Z,1509674765.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T02:06:05.051Z,1509674765.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:05.430Z,1509674765.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:05.444Z,1509674765.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T02:06:05.445Z,1509674765.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:05.839Z,1509674765.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:05.858Z,1509674765.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T02:06:05.859Z,1509674765.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:06.235Z,1509674766.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:06.249Z,1509674766.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T02:06:06.250Z,1509674766.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:06.645Z,1509674766.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:06.660Z,1509674766.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T02:06:06.661Z,1509674766.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:07.053Z,1509674767.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:07.068Z,1509674767.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T02:06:07.069Z,1509674767.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:07.453Z,1509674767.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:07.474Z,1509674767.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T02:06:07.475Z,1509674767.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:07.840Z,1509674767.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:07.854Z,1509674767.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T02:06:07.855Z,1509674767.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:08.236Z,1509674768.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:08.251Z,1509674768.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T02:06:08.252Z,1509674768.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:08.645Z,1509674768.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:08.660Z,1509674768.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T02:06:08.661Z,1509674768.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:09.054Z,1509674769.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:09.068Z,1509674769.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T02:06:09.069Z,1509674769.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:09.519Z,1509674769.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:09.543Z,1509674769.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-03T02:06:09.543Z,1509674769.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:09.836Z,1509674769.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:09.851Z,1509674769.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:10.239Z,1509674770.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:10.259Z,1509674770.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:10.651Z,1509674770.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:10.695Z,1509674770.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:11.037Z,1509674771.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:11.067Z,1509674771.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:11.436Z,1509674771.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:11.459Z,1509674771.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:11.851Z,1509674771.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:11.875Z,1509674771.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:12.270Z,1509674772.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:12.301Z,1509674772.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:12.647Z,1509674772.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:12.679Z,1509674772.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:13.036Z,1509674773.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:13.091Z,1509674773.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:13.436Z,1509674773.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:13.479Z,1509674773.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:13.857Z,1509674773.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:13.901Z,1509674773.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:14.235Z,1509674774.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:14.259Z,1509674774.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:14.645Z,1509674774.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:14.695Z,1509674774.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:15.045Z,1509674775.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:15.079Z,1509674775.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:15.457Z,1509674775.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:15.473Z,1509674775.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:15.835Z,1509674775.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:15.866Z,1509674775.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:16.236Z,1509674776.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:16.298Z,1509674776.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:16.649Z,1509674776.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:16.683Z,1509674776.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:17.045Z,1509674777.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:17.099Z,1509674777.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:17.446Z,1509674777.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:17.514Z,1509674777.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:17.837Z,1509674777.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:17.873Z,1509674777.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:18.236Z,1509674778.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:18.275Z,1509674778.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:18.649Z,1509674778.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:18.683Z,1509674778.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:18.683Z,1509674778.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2017-11-03T02:06:18.683Z,1509674778.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:06:18.685Z,1509674778.685 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:18.685Z,1509674778.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2017-11-03T02:06:18.685Z,1509674778.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:06:18.687Z,1509674778.687 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:18.687Z,1509674778.687 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2017-11-03T02:06:18.687Z,1509674778.687 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:06:18.761Z,1509674778.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:06:18.761Z,1509674778.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:06:18.761Z,1509674778.761 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:06:19.067Z,1509674779.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:19.160Z,1509674779.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:06:19.161Z,1509674779.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2017-11-03T02:06:19.161Z,1509674779.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:06:19.161Z,1509674779.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2017-11-03T02:06:19.162Z,1509674779.162 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:06:19.162Z,1509674779.162 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2017-11-03T02:06:19.459Z,1509674779.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:19.477Z,1509674779.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:06:19.478Z,1509674779.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:06:19.478Z,1509674779.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:06:19.478Z,1509674779.478 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:06:19.479Z,1509674779.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:06:19.479Z,1509674779.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:06:19.480Z,1509674779.480 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:06:19.480Z,1509674779.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:06:19.480Z,1509674779.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:06:19.840Z,1509674779.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:19.863Z,1509674779.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:06:19.872Z,1509674779.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:20.240Z,1509674780.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:20.262Z,1509674780.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:06:20.263Z,1509674780.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:20.657Z,1509674780.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:20.687Z,1509674780.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:06:20.688Z,1509674780.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:21.057Z,1509674781.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:21.087Z,1509674781.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:06:21.088Z,1509674781.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:21.457Z,1509674781.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:21.487Z,1509674781.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:06:21.487Z,1509674781.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:21.845Z,1509674781.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:21.859Z,1509674781.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:06:21.860Z,1509674781.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:22.244Z,1509674782.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:22.259Z,1509674782.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:06:22.260Z,1509674782.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:22.649Z,1509674782.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:22.702Z,1509674782.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:06:22.702Z,1509674782.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:23.049Z,1509674783.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:23.070Z,1509674783.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:06:23.071Z,1509674783.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:23.448Z,1509674783.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:23.463Z,1509674783.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:06:23.464Z,1509674783.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:23.845Z,1509674783.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:23.859Z,1509674783.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:06:23.861Z,1509674783.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:24.241Z,1509674784.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:24.256Z,1509674784.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:06:24.257Z,1509674784.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:24.648Z,1509674784.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:24.663Z,1509674784.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:06:24.664Z,1509674784.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:25.049Z,1509674785.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:25.064Z,1509674785.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:06:25.065Z,1509674785.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:25.450Z,1509674785.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:25.464Z,1509674785.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:06:25.465Z,1509674785.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:25.843Z,1509674785.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:25.858Z,1509674785.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:06:25.859Z,1509674785.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:26.245Z,1509674786.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:26.260Z,1509674786.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:06:26.261Z,1509674786.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:26.649Z,1509674786.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:26.664Z,1509674786.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:06:26.665Z,1509674786.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:27.054Z,1509674787.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:27.069Z,1509674787.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:06:27.070Z,1509674787.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:27.450Z,1509674787.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:27.470Z,1509674787.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:06:27.471Z,1509674787.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:27.846Z,1509674787.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:27.862Z,1509674787.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:06:27.863Z,1509674787.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:28.245Z,1509674788.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:28.302Z,1509674788.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:06:28.303Z,1509674788.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:28.649Z,1509674788.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:28.665Z,1509674788.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:06:28.666Z,1509674788.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:29.049Z,1509674789.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:29.063Z,1509674789.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:06:29.064Z,1509674789.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:29.454Z,1509674789.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:29.468Z,1509674789.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:06:29.469Z,1509674789.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:29.846Z,1509674789.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:29.898Z,1509674789.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:06:29.899Z,1509674789.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:30.245Z,1509674790.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:30.266Z,1509674790.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:06:30.267Z,1509674790.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:30.649Z,1509674790.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:30.698Z,1509674790.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:06:30.699Z,1509674790.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:31.050Z,1509674791.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:31.099Z,1509674791.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:06:31.100Z,1509674791.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:31.453Z,1509674791.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:31.467Z,1509674791.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:06:31.468Z,1509674791.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:31.842Z,1509674791.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:31.858Z,1509674791.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:06:31.859Z,1509674791.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:32.245Z,1509674792.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:32.260Z,1509674792.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:06:32.261Z,1509674792.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:32.653Z,1509674792.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:32.668Z,1509674792.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:06:32.669Z,1509674792.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:33.048Z,1509674793.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:33.063Z,1509674793.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:06:33.063Z,1509674793.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:33.453Z,1509674793.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:33.468Z,1509674793.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:06:33.470Z,1509674793.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:33.848Z,1509674793.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:33.862Z,1509674793.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:06:33.863Z,1509674793.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:34.241Z,1509674794.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:34.256Z,1509674794.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:06:34.257Z,1509674794.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:34.650Z,1509674794.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:34.665Z,1509674794.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:06:34.666Z,1509674794.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:35.054Z,1509674795.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:35.068Z,1509674795.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:06:35.069Z,1509674795.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:35.448Z,1509674795.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:35.463Z,1509674795.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:06:35.464Z,1509674795.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:35.845Z,1509674795.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:35.860Z,1509674795.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:06:35.861Z,1509674795.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:36.240Z,1509674796.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:36.255Z,1509674796.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:06:36.256Z,1509674796.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:36.648Z,1509674796.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:36.663Z,1509674796.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:06:36.664Z,1509674796.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:37.049Z,1509674797.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:37.064Z,1509674797.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:06:37.066Z,1509674797.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:37.453Z,1509674797.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:37.467Z,1509674797.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:06:37.469Z,1509674797.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:37.847Z,1509674797.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:37.866Z,1509674797.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:06:37.867Z,1509674797.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:38.244Z,1509674798.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:38.266Z,1509674798.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:06:38.267Z,1509674798.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:38.653Z,1509674798.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:38.668Z,1509674798.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T02:06:38.669Z,1509674798.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:39.054Z,1509674799.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:39.069Z,1509674799.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:39.452Z,1509674799.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:39.467Z,1509674799.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:39.848Z,1509674799.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:39.870Z,1509674799.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:40.242Z,1509674800.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:40.263Z,1509674800.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:40.652Z,1509674800.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:40.671Z,1509674800.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:41.052Z,1509674801.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:41.074Z,1509674801.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:41.452Z,1509674801.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:41.467Z,1509674801.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:41.845Z,1509674801.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:41.906Z,1509674801.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:42.245Z,1509674802.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:42.266Z,1509674802.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:42.652Z,1509674802.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:42.667Z,1509674802.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:43.053Z,1509674803.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:43.120Z,1509674803.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:43.452Z,1509674803.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:43.467Z,1509674803.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:43.847Z,1509674803.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:43.862Z,1509674803.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:44.244Z,1509674804.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:44.299Z,1509674804.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:44.656Z,1509674804.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:44.671Z,1509674804.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:45.053Z,1509674805.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:45.110Z,1509674805.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:45.456Z,1509674805.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:45.510Z,1509674805.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:45.848Z,1509674805.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:45.865Z,1509674805.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:46.247Z,1509674806.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:46.267Z,1509674806.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:46.656Z,1509674806.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:46.679Z,1509674806.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:47.056Z,1509674807.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:47.078Z,1509674807.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:47.456Z,1509674807.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:47.471Z,1509674807.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:47.845Z,1509674807.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:47.860Z,1509674807.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:48.247Z,1509674808.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:48.262Z,1509674808.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:48.653Z,1509674808.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:48.668Z,1509674808.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:49.056Z,1509674809.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:49.079Z,1509674809.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:49.456Z,1509674809.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:49.478Z,1509674809.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:49.847Z,1509674809.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:49.863Z,1509674809.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:50.241Z,1509674810.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:50.268Z,1509674810.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:50.660Z,1509674810.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:50.675Z,1509674810.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:51.060Z,1509674811.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:51.101Z,1509674811.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:51.456Z,1509674811.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:51.471Z,1509674811.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:51.849Z,1509674811.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:51.864Z,1509674811.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:52.246Z,1509674812.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:52.267Z,1509674812.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:52.657Z,1509674812.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:52.672Z,1509674812.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:53.060Z,1509674813.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:53.075Z,1509674813.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:53.453Z,1509674813.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:53.468Z,1509674813.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:53.845Z,1509674813.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:53.867Z,1509674813.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:54.248Z,1509674814.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:54.263Z,1509674814.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:54.660Z,1509674814.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:54.683Z,1509674814.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:55.056Z,1509674815.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:55.071Z,1509674815.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:55.458Z,1509674815.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:55.473Z,1509674815.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:58.555Z,1509674818.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:58.650Z,1509674818.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:58.797Z,1509674818.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:58.831Z,1509674818.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:59.206Z,1509674819.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:59.221Z,1509674819.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:06:59.609Z,1509674819.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:06:59.659Z,1509674819.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:00.008Z,1509674820.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:00.034Z,1509674820.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:00.399Z,1509674820.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:00.451Z,1509674820.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:00.800Z,1509674820.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:00.858Z,1509674820.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:01.199Z,1509674821.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:01.219Z,1509674821.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:01.610Z,1509674821.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:01.628Z,1509674821.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:02.008Z,1509674822.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:02.052Z,1509674822.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:02.408Z,1509674822.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:02.423Z,1509674822.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:02.800Z,1509674822.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:02.815Z,1509674822.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:03.193Z,1509674823.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:03.218Z,1509674823.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:03.608Z,1509674823.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:03.624Z,1509674823.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:04.008Z,1509674824.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:04.033Z,1509674824.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:04.405Z,1509674824.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:04.423Z,1509674824.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:04.796Z,1509674824.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:04.814Z,1509674824.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:05.200Z,1509674825.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:05.215Z,1509674825.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:05.580Z,1509674825.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:05.606Z,1509674825.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:06.008Z,1509674826.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:06.028Z,1509674826.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:06.410Z,1509674826.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:06.434Z,1509674826.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:06.808Z,1509674826.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:06.852Z,1509674826.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:07.198Z,1509674827.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:07.219Z,1509674827.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:07.600Z,1509674827.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:07.626Z,1509674827.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:07.999Z,1509674827.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:08.019Z,1509674828.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:08.396Z,1509674828.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:08.411Z,1509674828.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:08.809Z,1509674828.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:08.824Z,1509674828.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:09.208Z,1509674829.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:09.228Z,1509674829.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:09.609Z,1509674829.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:09.627Z,1509674829.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:09.998Z,1509674829.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:10.031Z,1509674830.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:10.399Z,1509674830.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:10.419Z,1509674830.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:10.799Z,1509674830.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:10.820Z,1509674830.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:11.200Z,1509674831.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:11.219Z,1509674831.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:11.605Z,1509674831.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:11.675Z,1509674831.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:12.012Z,1509674832.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:12.033Z,1509674832.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:12.412Z,1509674832.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:12.432Z,1509674832.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:12.800Z,1509674832.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:12.867Z,1509674832.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:13.191Z,1509674833.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:13.217Z,1509674833.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:13.614Z,1509674833.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:13.631Z,1509674833.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:14.013Z,1509674834.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:14.067Z,1509674834.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:14.410Z,1509674834.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:14.428Z,1509674834.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:14.792Z,1509674834.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:14.858Z,1509674834.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:15.189Z,1509674835.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:15.253Z,1509674835.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:15.609Z,1509674835.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:15.629Z,1509674835.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:16.016Z,1509674836.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:16.032Z,1509674836.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:16.410Z,1509674836.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:16.459Z,1509674836.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:16.789Z,1509674836.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:16.818Z,1509674836.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:17.192Z,1509674837.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:17.219Z,1509674837.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:17.585Z,1509674837.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:17.621Z,1509674837.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:18.010Z,1509674838.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:18.025Z,1509674838.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:18.414Z,1509674838.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:18.430Z,1509674838.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:18.810Z,1509674838.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:18.829Z,1509674838.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:19.189Z,1509674839.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:19.225Z,1509674839.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:19.590Z,1509674839.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:19.621Z,1509674839.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:19.990Z,1509674839.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:20.005Z,1509674840.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:20.395Z,1509674840.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:20.435Z,1509674840.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:20.806Z,1509674840.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:20.836Z,1509674840.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:21.202Z,1509674841.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:21.236Z,1509674841.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:21.605Z,1509674841.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:21.639Z,1509674841.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:21.996Z,1509674841.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:22.011Z,1509674842.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:22.393Z,1509674842.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:22.410Z,1509674842.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:22.795Z,1509674842.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:22.846Z,1509674842.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:23.200Z,1509674843.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:23.216Z,1509674843.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:23.601Z,1509674843.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:23.616Z,1509674843.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:24.006Z,1509674844.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:24.041Z,1509674844.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:24.406Z,1509674844.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:24.421Z,1509674844.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:24.800Z,1509674844.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:24.815Z,1509674844.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:25.198Z,1509674845.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:25.214Z,1509674845.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:25.601Z,1509674845.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:25.623Z,1509674845.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:26.006Z,1509674846.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:26.061Z,1509674846.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:26.404Z,1509674846.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:26.427Z,1509674846.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:26.801Z,1509674846.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:26.815Z,1509674846.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:27.200Z,1509674847.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:27.219Z,1509674847.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:27.603Z,1509674847.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:27.674Z,1509674847.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:28.013Z,1509674848.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:28.030Z,1509674848.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:28.410Z,1509674848.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:28.459Z,1509674848.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:28.793Z,1509674848.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:28.827Z,1509674848.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:29.183Z,1509674849.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:29.235Z,1509674849.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:29.599Z,1509674849.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:29.658Z,1509674849.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:30.009Z,1509674850.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:30.029Z,1509674850.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:30.415Z,1509674850.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:30.432Z,1509674850.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:30.804Z,1509674850.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:30.851Z,1509674850.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:31.199Z,1509674851.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:31.219Z,1509674851.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:31.599Z,1509674851.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:31.614Z,1509674851.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:31.986Z,1509674851.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:32.014Z,1509674852.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:32.396Z,1509674852.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:32.419Z,1509674852.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:32.813Z,1509674852.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:32.828Z,1509674852.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:33.205Z,1509674853.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:33.223Z,1509674853.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:33.610Z,1509674853.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:33.628Z,1509674853.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:33.984Z,1509674853.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:34.011Z,1509674854.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:34.384Z,1509674854.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:34.414Z,1509674854.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:34.789Z,1509674854.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:34.831Z,1509674854.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:35.184Z,1509674855.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:35.218Z,1509674855.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:35.591Z,1509674855.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:35.617Z,1509674855.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:36.009Z,1509674856.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:07:36.033Z,1509674856.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:36.420Z,1509674856.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:36.828Z,1509674856.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:37.231Z,1509674857.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:37.616Z,1509674857.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:38.016Z,1509674858.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:38.421Z,1509674858.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:38.828Z,1509674858.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:39.227Z,1509674859.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:39.629Z,1509674859.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:40.065Z,1509674860.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:40.430Z,1509674860.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:40.823Z,1509674860.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:41.216Z,1509674861.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:41.677Z,1509674861.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:42.053Z,1509674862.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:42.455Z,1509674862.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:42.815Z,1509674862.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:43.252Z,1509674863.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:43.658Z,1509674863.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:44.024Z,1509674864.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:44.429Z,1509674864.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:44.823Z,1509674864.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:45.219Z,1509674865.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:45.624Z,1509674865.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:46.020Z,1509674866.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:46.427Z,1509674866.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:46.831Z,1509674866.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:47.212Z,1509674867.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:47.620Z,1509674867.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:48.028Z,1509674868.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:48.431Z,1509674868.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:48.824Z,1509674868.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:49.228Z,1509674869.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:49.620Z,1509674869.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:50.014Z,1509674870.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:50.419Z,1509674870.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:50.832Z,1509674870.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:51.228Z,1509674871.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:51.653Z,1509674871.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:52.017Z,1509674872.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:52.426Z,1509674872.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:52.825Z,1509674872.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:53.217Z,1509674873.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:53.623Z,1509674873.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:54.074Z,1509674874.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:54.431Z,1509674874.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:54.858Z,1509674874.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:55.243Z,1509674875.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:55.617Z,1509674875.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:58.731Z,1509674878.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:58.895Z,1509674878.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:59.334Z,1509674879.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:07:59.734Z,1509674879.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:00.092Z,1509674880.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:00.486Z,1509674880.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:00.888Z,1509674880.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:01.287Z,1509674881.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:01.692Z,1509674881.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:02.111Z,1509674882.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:02.492Z,1509674882.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:02.887Z,1509674882.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:03.291Z,1509674883.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:03.687Z,1509674883.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:04.087Z,1509674884.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:04.488Z,1509674884.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:04.889Z,1509674884.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:05.312Z,1509674885.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:05.692Z,1509674885.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:06.087Z,1509674886.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:06.488Z,1509674886.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:06.895Z,1509674886.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:07.288Z,1509674887.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:07.716Z,1509674887.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:08.095Z,1509674888.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:08.513Z,1509674888.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:08.887Z,1509674888.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:09.295Z,1509674889.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:09.687Z,1509674889.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:10.088Z,1509674890.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:10.534Z,1509674890.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:10.893Z,1509674890.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:11.292Z,1509674891.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:11.693Z,1509674891.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:12.134Z,1509674892.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:12.490Z,1509674892.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:12.889Z,1509674892.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:13.322Z,1509674893.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:13.696Z,1509674893.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:14.130Z,1509674894.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:14.530Z,1509674894.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:14.888Z,1509674894.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:15.296Z,1509674895.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:15.689Z,1509674895.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:16.088Z,1509674896.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:16.495Z,1509674896.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:16.895Z,1509674896.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:17.302Z,1509674897.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:17.695Z,1509674897.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:18.086Z,1509674898.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:18.489Z,1509674898.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:18.890Z,1509674898.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:19.291Z,1509674899.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:19.695Z,1509674899.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:20.095Z,1509674900.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:20.495Z,1509674900.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:20.887Z,1509674900.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:21.283Z,1509674901.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:21.685Z,1509674901.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:22.091Z,1509674902.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:22.491Z,1509674902.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:22.895Z,1509674902.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:23.295Z,1509674903.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:23.697Z,1509674903.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:24.087Z,1509674904.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:24.488Z,1509674904.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:24.891Z,1509674904.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:25.340Z,1509674905.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:25.698Z,1509674905.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:26.095Z,1509674906.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:26.538Z,1509674906.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:26.889Z,1509674906.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:27.291Z,1509674907.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:27.726Z,1509674907.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:28.088Z,1509674908.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:28.526Z,1509674908.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:28.935Z,1509674908.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:29.306Z,1509674909.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:29.696Z,1509674909.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:30.088Z,1509674910.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:30.485Z,1509674910.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:30.895Z,1509674910.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:31.286Z,1509674911.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:31.699Z,1509674911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:32.103Z,1509674912.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:32.499Z,1509674912.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:32.885Z,1509674912.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:33.291Z,1509674913.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:33.687Z,1509674913.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:34.089Z,1509674914.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:34.488Z,1509674914.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:34.899Z,1509674914.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:35.309Z,1509674915.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:35.703Z,1509674915.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:36.079Z,1509674916.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:36.480Z,1509674916.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:36.880Z,1509674916.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:37.306Z,1509674917.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:37.705Z,1509674917.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:38.103Z,1509674918.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:38.504Z,1509674918.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:38.879Z,1509674918.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:39.279Z,1509674919.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:39.719Z,1509674919.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:40.083Z,1509674920.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:40.484Z,1509674920.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:40.934Z,1509674920.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:41.313Z,1509674921.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:41.711Z,1509674921.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:42.115Z,1509674922.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:42.485Z,1509674922.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:42.919Z,1509674922.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:43.319Z,1509674923.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:43.719Z,1509674923.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:44.109Z,1509674924.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:44.509Z,1509674924.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:44.883Z,1509674924.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:45.280Z,1509674925.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:45.684Z,1509674925.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:46.085Z,1509674926.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:46.491Z,1509674926.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:46.911Z,1509674926.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:47.313Z,1509674927.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:47.712Z,1509674927.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:48.085Z,1509674928.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:48.482Z,1509674928.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:48.887Z,1509674928.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:49.284Z,1509674929.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:49.714Z,1509674929.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:50.113Z,1509674930.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:50.496Z,1509674930.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:50.887Z,1509674930.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:51.287Z,1509674931.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:51.687Z,1509674931.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:52.087Z,1509674932.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:52.486Z,1509674932.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:52.913Z,1509674932.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:53.314Z,1509674933.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:53.715Z,1509674933.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:54.087Z,1509674934.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:54.480Z,1509674934.480 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:08:54.480Z,1509674934.480 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:08:54.480Z,1509674934.480 [BPC1](ERROR): Data Fault
2017-11-03T02:08:54.488Z,1509674934.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:54.592Z,1509674934.592 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:08:54.887Z,1509674934.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:54.891Z,1509674934.891 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T02:08:54.891Z,1509674934.891 [Default:CheckIn:C.Wait] Stopped
2017-11-03T02:08:54.891Z,1509674934.891 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T02:08:54.891Z,1509674934.891 [Default:CheckIn:D] Running Loop=1
2017-11-03T02:08:55.287Z,1509674935.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:55.290Z,1509674935.290 [Default:CheckIn:D] Stopped
2017-11-03T02:08:55.290Z,1509674935.290 [Default:CheckIn:E] Running Loop=1
2017-11-03T02:08:55.715Z,1509674935.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:55.719Z,1509674935.719 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.795394 min 
2017-11-03T02:08:55.719Z,1509674935.719 [Default:CheckIn:E] Stopped
2017-11-03T02:08:55.719Z,1509674935.719 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T02:08:55.719Z,1509674935.719 [Default:CheckIn] Stopped
2017-11-03T02:08:55.720Z,1509674935.720 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T02:08:55.720Z,1509674935.720 [Default:CheckIn](INFO): Running loop #12
2017-11-03T02:08:55.720Z,1509674935.720 [Default:CheckIn] Running Loop=12
2017-11-03T02:08:55.720Z,1509674935.720 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T02:08:55.720Z,1509674935.720 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T02:08:55.797Z,1509674935.797 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:08:55.797Z,1509674935.797 [BPC1] No Fault, FailCount= 1
2017-11-03T02:08:58.840Z,1509674938.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:59.047Z,1509674939.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:59.393Z,1509674939.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:08:59.792Z,1509674939.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:00.192Z,1509674940.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:00.591Z,1509674940.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:01.017Z,1509674941.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:01.419Z,1509674941.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:01.819Z,1509674941.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:02.191Z,1509674942.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:02.593Z,1509674942.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:02.991Z,1509674942.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:03.395Z,1509674943.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:03.820Z,1509674943.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:04.220Z,1509674944.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:04.596Z,1509674944.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:04.991Z,1509674944.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:05.390Z,1509674945.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:05.791Z,1509674945.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:06.199Z,1509674946.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:06.602Z,1509674946.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:07.003Z,1509674947.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:07.404Z,1509674947.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:07.804Z,1509674947.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:08.203Z,1509674948.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:08.595Z,1509674948.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:08.999Z,1509674948.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:09.399Z,1509674949.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:09.807Z,1509674949.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:10.204Z,1509674950.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:10.650Z,1509674950.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:10.995Z,1509674950.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:11.415Z,1509674951.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:11.801Z,1509674951.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:12.196Z,1509674952.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:12.639Z,1509674952.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:13.007Z,1509674953.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:13.439Z,1509674953.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:13.831Z,1509674953.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:14.198Z,1509674954.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:14.598Z,1509674954.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:15.001Z,1509674955.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:15.403Z,1509674955.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:15.811Z,1509674955.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:16.214Z,1509674956.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:16.611Z,1509674956.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:16.995Z,1509674956.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:17.399Z,1509674957.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:17.802Z,1509674957.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:18.197Z,1509674958.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:18.599Z,1509674958.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:19.004Z,1509674959.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:19.407Z,1509674959.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:19.831Z,1509674959.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:19.831Z,1509674959.831 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2017-11-03T02:09:19.831Z,1509674959.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:09:19.833Z,1509674959.833 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:19.833Z,1509674959.833 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2017-11-03T02:09:19.833Z,1509674959.833 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:09:19.835Z,1509674959.835 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:19.835Z,1509674959.835 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2017-11-03T02:09:19.835Z,1509674959.835 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:09:19.928Z,1509674959.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:09:19.929Z,1509674959.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:09:19.929Z,1509674959.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:09:20.288Z,1509674960.288 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:09:20.289Z,1509674960.289 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2017-11-03T02:09:20.289Z,1509674960.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:09:20.289Z,1509674960.289 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2017-11-03T02:09:20.290Z,1509674960.290 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:09:20.290Z,1509674960.290 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2017-11-03T02:09:20.610Z,1509674960.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:09:20.610Z,1509674960.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:09:20.610Z,1509674960.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:09:20.611Z,1509674960.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:09:20.611Z,1509674960.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:09:20.612Z,1509674960.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:09:20.612Z,1509674960.612 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:09:20.617Z,1509674960.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:09:20.617Z,1509674960.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:09:20.991Z,1509674960.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:09:20.993Z,1509674960.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:21.386Z,1509674961.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:09:21.387Z,1509674961.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:21.819Z,1509674961.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:09:21.820Z,1509674961.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:22.218Z,1509674962.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:09:22.219Z,1509674962.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:22.600Z,1509674962.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:09:22.617Z,1509674962.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:22.991Z,1509674962.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:09:22.992Z,1509674962.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:23.395Z,1509674963.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:09:23.396Z,1509674963.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:23.791Z,1509674963.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:09:23.792Z,1509674963.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:24.191Z,1509674964.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:09:24.192Z,1509674964.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:24.595Z,1509674964.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:09:24.596Z,1509674964.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:25.019Z,1509674965.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:09:25.019Z,1509674965.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:25.420Z,1509674965.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:09:25.421Z,1509674965.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:25.843Z,1509674965.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:09:25.844Z,1509674965.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:26.229Z,1509674966.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:09:26.230Z,1509674966.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:26.635Z,1509674966.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:09:26.636Z,1509674966.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:27.030Z,1509674967.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:09:27.031Z,1509674967.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:27.390Z,1509674967.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:09:27.391Z,1509674967.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:27.842Z,1509674967.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:09:27.843Z,1509674967.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:28.246Z,1509674968.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:09:28.247Z,1509674968.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:28.608Z,1509674968.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:09:28.625Z,1509674968.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:28.995Z,1509674968.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:09:28.996Z,1509674968.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:29.395Z,1509674969.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:09:29.396Z,1509674969.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:29.796Z,1509674969.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:09:29.797Z,1509674969.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:30.195Z,1509674970.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:09:30.197Z,1509674970.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:30.595Z,1509674970.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:09:30.596Z,1509674970.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:30.996Z,1509674970.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:09:30.997Z,1509674970.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:31.400Z,1509674971.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:09:31.401Z,1509674971.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:31.832Z,1509674971.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:09:31.833Z,1509674971.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:32.193Z,1509674972.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:09:32.194Z,1509674972.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:32.596Z,1509674972.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:09:32.597Z,1509674972.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:33.002Z,1509674973.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:09:33.003Z,1509674973.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:33.392Z,1509674973.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:09:33.393Z,1509674973.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:33.800Z,1509674973.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:09:33.801Z,1509674973.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:34.202Z,1509674974.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:09:34.203Z,1509674974.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:34.602Z,1509674974.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:09:34.603Z,1509674974.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:35.002Z,1509674975.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:09:35.003Z,1509674975.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:35.396Z,1509674975.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:09:35.397Z,1509674975.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:35.796Z,1509674975.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:09:35.797Z,1509674975.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:36.196Z,1509674976.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:09:36.197Z,1509674976.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:36.592Z,1509674976.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:09:36.594Z,1509674976.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:36.996Z,1509674976.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:09:36.998Z,1509674976.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:37.425Z,1509674977.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:09:37.426Z,1509674977.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:37.830Z,1509674977.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:09:37.831Z,1509674977.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:38.196Z,1509674978.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:09:38.197Z,1509674978.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:38.595Z,1509674978.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:09:38.597Z,1509674978.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:38.996Z,1509674978.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:09:38.997Z,1509674978.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:39.396Z,1509674979.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:09:39.397Z,1509674979.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:39.846Z,1509674979.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:40.205Z,1509674980.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:40.650Z,1509674980.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:41.004Z,1509674981.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:41.394Z,1509674981.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:41.838Z,1509674981.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:42.198Z,1509674982.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:42.619Z,1509674982.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:43.042Z,1509674983.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:43.415Z,1509674983.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:43.814Z,1509674983.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:44.203Z,1509674984.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:44.603Z,1509674984.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:45.006Z,1509674985.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:45.392Z,1509674985.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:45.807Z,1509674985.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:46.203Z,1509674986.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:46.604Z,1509674986.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:47.003Z,1509674987.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:47.393Z,1509674987.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:47.793Z,1509674987.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:48.203Z,1509674988.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:48.593Z,1509674988.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:49.004Z,1509674989.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:49.415Z,1509674989.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:49.811Z,1509674989.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:50.203Z,1509674990.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:50.603Z,1509674990.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:50.997Z,1509674990.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:51.399Z,1509674991.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:51.809Z,1509674991.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:52.212Z,1509674992.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:52.609Z,1509674992.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:52.996Z,1509674992.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:53.400Z,1509674993.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:53.807Z,1509674993.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:54.198Z,1509674994.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:54.646Z,1509674994.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:55.062Z,1509674995.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:55.408Z,1509674995.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:55.839Z,1509674995.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:58.896Z,1509674998.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:59.094Z,1509674999.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:59.498Z,1509674999.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:09:59.863Z,1509674999.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:00.256Z,1509675000.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:00.650Z,1509675000.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:01.050Z,1509675001.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:01.449Z,1509675001.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:01.863Z,1509675001.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:02.267Z,1509675002.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:02.659Z,1509675002.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:03.045Z,1509675003.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:03.448Z,1509675003.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:03.848Z,1509675003.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:04.245Z,1509675004.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:04.659Z,1509675004.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:05.059Z,1509675005.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:05.456Z,1509675005.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:05.848Z,1509675005.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:06.255Z,1509675006.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:06.686Z,1509675006.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:07.063Z,1509675007.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:07.459Z,1509675007.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:07.851Z,1509675007.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:08.247Z,1509675008.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:08.659Z,1509675008.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:09.059Z,1509675009.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:09.463Z,1509675009.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:09.848Z,1509675009.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:10.250Z,1509675010.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:10.663Z,1509675010.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:11.059Z,1509675011.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:11.499Z,1509675011.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:11.891Z,1509675011.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:12.248Z,1509675012.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:12.691Z,1509675012.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:13.067Z,1509675013.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:13.502Z,1509675013.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:13.875Z,1509675013.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:14.244Z,1509675014.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:14.667Z,1509675014.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:15.064Z,1509675015.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:15.460Z,1509675015.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:15.851Z,1509675015.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:16.250Z,1509675016.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:16.656Z,1509675016.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:17.060Z,1509675017.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:17.464Z,1509675017.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:17.851Z,1509675017.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:18.253Z,1509675018.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:18.665Z,1509675018.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:19.058Z,1509675019.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:19.467Z,1509675019.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:19.851Z,1509675019.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:20.247Z,1509675020.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:20.667Z,1509675020.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:21.070Z,1509675021.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:21.471Z,1509675021.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:21.849Z,1509675021.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:22.249Z,1509675022.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:22.661Z,1509675022.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:23.061Z,1509675023.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:23.463Z,1509675023.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:23.851Z,1509675023.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:24.249Z,1509675024.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:24.670Z,1509675024.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:25.071Z,1509675025.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:25.461Z,1509675025.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:25.867Z,1509675025.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:26.275Z,1509675026.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:26.661Z,1509675026.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:27.057Z,1509675027.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:27.499Z,1509675027.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:27.859Z,1509675027.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:28.279Z,1509675028.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:28.699Z,1509675028.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:29.061Z,1509675029.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:29.466Z,1509675029.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:29.851Z,1509675029.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:30.255Z,1509675030.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:30.662Z,1509675030.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:31.056Z,1509675031.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:31.460Z,1509675031.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:31.852Z,1509675031.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:32.246Z,1509675032.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:32.667Z,1509675032.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:33.064Z,1509675033.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:33.459Z,1509675033.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:33.840Z,1509675033.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:34.241Z,1509675034.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:34.663Z,1509675034.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:35.071Z,1509675035.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:35.467Z,1509675035.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:35.841Z,1509675035.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:36.239Z,1509675036.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:36.670Z,1509675036.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:37.067Z,1509675037.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:37.463Z,1509675037.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:37.840Z,1509675037.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:38.239Z,1509675038.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:38.663Z,1509675038.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:39.070Z,1509675039.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:39.462Z,1509675039.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:39.840Z,1509675039.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:40.239Z,1509675040.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:40.714Z,1509675040.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:41.091Z,1509675041.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:41.469Z,1509675041.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:41.839Z,1509675041.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:42.271Z,1509675042.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:42.677Z,1509675042.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:43.083Z,1509675043.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:43.483Z,1509675043.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:43.838Z,1509675043.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:44.243Z,1509675044.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:44.667Z,1509675044.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:45.069Z,1509675045.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:45.465Z,1509675045.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:45.839Z,1509675045.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:46.238Z,1509675046.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:46.666Z,1509675046.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:47.066Z,1509675047.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:47.468Z,1509675047.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:47.839Z,1509675047.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:48.243Z,1509675048.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:48.668Z,1509675048.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:49.067Z,1509675049.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:49.467Z,1509675049.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:49.845Z,1509675049.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:50.239Z,1509675050.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:50.665Z,1509675050.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:51.067Z,1509675051.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:51.467Z,1509675051.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:51.887Z,1509675051.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:52.282Z,1509675052.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:52.671Z,1509675052.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:53.075Z,1509675053.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:53.478Z,1509675053.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:53.846Z,1509675053.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:54.281Z,1509675054.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:54.714Z,1509675054.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:55.085Z,1509675055.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:55.567Z,1509675055.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:10:55.898Z,1509675055.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:01.999Z,1509675061.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:02.233Z,1509675062.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:02.639Z,1509675062.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:03.043Z,1509675063.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:03.407Z,1509675063.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:03.815Z,1509675063.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:04.239Z,1509675064.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:04.607Z,1509675064.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:04.982Z,1509675064.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:04.997Z,1509675064.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:05.373Z,1509675065.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:05.389Z,1509675065.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:05.778Z,1509675065.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:05.793Z,1509675065.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:06.152Z,1509675066.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:06.187Z,1509675066.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:06.557Z,1509675066.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:06.588Z,1509675066.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:06.957Z,1509675066.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:06.989Z,1509675066.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:07.355Z,1509675067.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:07.369Z,1509675067.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:07.769Z,1509675067.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:07.807Z,1509675067.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:08.169Z,1509675068.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:08.196Z,1509675068.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:08.565Z,1509675068.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:08.599Z,1509675068.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:08.957Z,1509675068.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:08.972Z,1509675068.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:09.361Z,1509675069.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:09.376Z,1509675069.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:09.753Z,1509675069.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:09.767Z,1509675069.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:10.158Z,1509675070.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:10.173Z,1509675070.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:10.557Z,1509675070.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:10.571Z,1509675070.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:10.969Z,1509675070.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:11.002Z,1509675071.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:11.369Z,1509675071.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:11.395Z,1509675071.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:11.770Z,1509675071.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:11.803Z,1509675071.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:12.155Z,1509675072.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:12.170Z,1509675072.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:12.557Z,1509675072.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:12.572Z,1509675072.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:12.958Z,1509675072.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:12.973Z,1509675072.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:13.355Z,1509675073.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:13.370Z,1509675073.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:13.769Z,1509675073.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:13.817Z,1509675073.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:14.177Z,1509675074.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:14.207Z,1509675074.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:14.577Z,1509675074.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:14.606Z,1509675074.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:14.960Z,1509675074.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:15.022Z,1509675075.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:15.360Z,1509675075.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:15.426Z,1509675075.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:15.761Z,1509675075.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:15.776Z,1509675075.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:16.164Z,1509675076.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:16.211Z,1509675076.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:16.562Z,1509675076.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:16.581Z,1509675076.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:16.969Z,1509675076.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:17.014Z,1509675077.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:17.377Z,1509675077.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:17.423Z,1509675077.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:17.769Z,1509675077.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:17.785Z,1509675077.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:18.163Z,1509675078.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:18.178Z,1509675078.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:18.564Z,1509675078.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:18.579Z,1509675078.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:18.964Z,1509675078.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:18.987Z,1509675078.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:19.363Z,1509675079.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:19.377Z,1509675079.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:19.770Z,1509675079.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:19.785Z,1509675079.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:20.177Z,1509675080.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:20.205Z,1509675080.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:20.569Z,1509675080.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:20.605Z,1509675080.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:20.964Z,1509675080.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:20.979Z,1509675080.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:21.363Z,1509675081.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:21.379Z,1509675081.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:21.765Z,1509675081.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:21.780Z,1509675081.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:22.164Z,1509675082.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:22.179Z,1509675082.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:22.565Z,1509675082.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:22.580Z,1509675082.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:22.977Z,1509675082.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:23.007Z,1509675083.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:23.381Z,1509675083.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:23.405Z,1509675083.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:23.777Z,1509675083.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:23.807Z,1509675083.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:24.165Z,1509675084.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:24.180Z,1509675084.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:24.564Z,1509675084.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:24.579Z,1509675084.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:24.966Z,1509675084.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:24.981Z,1509675084.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:25.367Z,1509675085.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:25.381Z,1509675085.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:25.770Z,1509675085.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:25.785Z,1509675085.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:26.177Z,1509675086.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:26.207Z,1509675086.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:26.577Z,1509675086.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:26.607Z,1509675086.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:26.960Z,1509675086.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:26.975Z,1509675086.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:27.366Z,1509675087.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:27.381Z,1509675087.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:27.765Z,1509675087.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:27.781Z,1509675087.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:28.166Z,1509675088.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:28.181Z,1509675088.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:28.566Z,1509675088.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:28.581Z,1509675088.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:28.966Z,1509675088.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:28.987Z,1509675088.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:29.421Z,1509675089.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:29.483Z,1509675089.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:29.770Z,1509675089.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:29.785Z,1509675089.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:30.166Z,1509675090.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:30.182Z,1509675090.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:30.558Z,1509675090.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:30.614Z,1509675090.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:30.966Z,1509675090.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:30.981Z,1509675090.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:31.364Z,1509675091.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:31.416Z,1509675091.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:31.777Z,1509675091.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:31.826Z,1509675091.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:32.176Z,1509675092.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:32.195Z,1509675092.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:32.577Z,1509675092.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:32.592Z,1509675092.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:32.986Z,1509675092.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:33.037Z,1509675093.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:33.366Z,1509675093.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:33.387Z,1509675093.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:33.767Z,1509675093.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:33.782Z,1509675093.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:34.163Z,1509675094.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:34.178Z,1509675094.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:34.566Z,1509675094.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:34.581Z,1509675094.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:34.974Z,1509675094.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:34.994Z,1509675094.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:35.374Z,1509675095.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:35.389Z,1509675095.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:35.777Z,1509675095.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:35.793Z,1509675095.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:36.168Z,1509675096.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:36.183Z,1509675096.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:36.561Z,1509675096.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:36.583Z,1509675096.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:36.966Z,1509675096.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:36.982Z,1509675096.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:37.362Z,1509675097.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:37.377Z,1509675097.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:37.766Z,1509675097.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:37.793Z,1509675097.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:38.177Z,1509675098.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:38.192Z,1509675098.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:38.580Z,1509675098.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:38.595Z,1509675098.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:38.967Z,1509675098.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:38.983Z,1509675098.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:39.365Z,1509675099.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:39.383Z,1509675099.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:39.768Z,1509675099.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:39.783Z,1509675099.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:40.166Z,1509675100.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:40.181Z,1509675100.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:40.566Z,1509675100.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:40.587Z,1509675100.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:40.981Z,1509675100.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:40.996Z,1509675100.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:41.373Z,1509675101.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:41.389Z,1509675101.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:41.780Z,1509675101.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:41.796Z,1509675101.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:42.168Z,1509675102.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:42.182Z,1509675102.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:42.567Z,1509675102.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:42.583Z,1509675102.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:42.673Z,1509675102.673 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T02:11:42.966Z,1509675102.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:42.981Z,1509675102.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:43.366Z,1509675103.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:43.381Z,1509675103.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:43.777Z,1509675103.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:43.866Z,1509675103.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:44.177Z,1509675104.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:44.193Z,1509675104.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:44.582Z,1509675104.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:44.602Z,1509675104.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:44.954Z,1509675104.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:45.022Z,1509675105.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:45.356Z,1509675105.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:45.382Z,1509675105.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:45.757Z,1509675105.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:45.820Z,1509675105.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:46.160Z,1509675106.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:46.226Z,1509675106.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:46.556Z,1509675106.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:46.582Z,1509675106.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:46.982Z,1509675106.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:46.997Z,1509675106.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:47.381Z,1509675107.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:47.396Z,1509675107.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:47.777Z,1509675107.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:47.793Z,1509675107.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:48.159Z,1509675108.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:48.185Z,1509675108.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:48.553Z,1509675108.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:48.582Z,1509675108.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:48.958Z,1509675108.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:48.983Z,1509675108.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:49.359Z,1509675109.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:49.385Z,1509675109.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:49.774Z,1509675109.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:49.789Z,1509675109.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:50.177Z,1509675110.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:50.192Z,1509675110.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:50.575Z,1509675110.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:50.599Z,1509675110.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:50.959Z,1509675110.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:50.985Z,1509675110.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:51.356Z,1509675111.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:51.382Z,1509675111.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:51.753Z,1509675111.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:51.779Z,1509675111.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:52.154Z,1509675112.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:52.185Z,1509675112.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:52.556Z,1509675112.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:52.589Z,1509675112.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:52.965Z,1509675112.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:52.995Z,1509675112.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:53.381Z,1509675113.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:53.396Z,1509675113.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:53.777Z,1509675113.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:53.793Z,1509675113.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:54.153Z,1509675114.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:54.167Z,1509675114.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:54.557Z,1509675114.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:54.588Z,1509675114.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:54.958Z,1509675114.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:54.989Z,1509675114.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:55.359Z,1509675115.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:55.382Z,1509675115.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:55.770Z,1509675115.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:55.794Z,1509675115.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:56.174Z,1509675116.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:56.199Z,1509675116.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:59.394Z,1509675119.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:59.491Z,1509675119.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:11:59.640Z,1509675119.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:11:59.658Z,1509675119.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:00.038Z,1509675120.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:00.098Z,1509675120.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:00.435Z,1509675120.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:00.463Z,1509675120.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:00.849Z,1509675120.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:00.899Z,1509675120.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:01.248Z,1509675121.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:01.299Z,1509675121.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:01.650Z,1509675121.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:01.665Z,1509675121.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:02.036Z,1509675122.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:02.052Z,1509675122.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:02.435Z,1509675122.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:02.450Z,1509675122.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:02.834Z,1509675122.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:02.870Z,1509675122.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:03.238Z,1509675123.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:03.245Z,1509675123.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x33958 got:0x48895
2017-11-03T02:12:03.274Z,1509675123.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:03.646Z,1509675123.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:03.661Z,1509675123.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:04.048Z,1509675124.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:04.063Z,1509675124.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:04.444Z,1509675124.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:04.460Z,1509675124.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:04.837Z,1509675124.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:04.852Z,1509675124.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:05.238Z,1509675125.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:05.252Z,1509675125.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:05.641Z,1509675125.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:05.663Z,1509675125.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:06.050Z,1509675126.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:06.070Z,1509675126.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:06.440Z,1509675126.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:06.467Z,1509675126.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:06.826Z,1509675126.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:06.852Z,1509675126.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:07.227Z,1509675127.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:07.253Z,1509675127.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:07.651Z,1509675127.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:07.666Z,1509675127.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:08.042Z,1509675128.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:08.072Z,1509675128.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:08.447Z,1509675128.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:08.462Z,1509675128.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:08.838Z,1509675128.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:08.853Z,1509675128.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:09.220Z,1509675129.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:09.252Z,1509675129.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:09.649Z,1509675129.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:09.664Z,1509675129.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:10.047Z,1509675130.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:10.066Z,1509675130.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:10.448Z,1509675130.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:10.463Z,1509675130.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:10.825Z,1509675130.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:10.871Z,1509675130.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:11.220Z,1509675131.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:11.251Z,1509675131.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:11.647Z,1509675131.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:11.653Z,1509675131.653 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-03T02:12:11.679Z,1509675131.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:12.045Z,1509675132.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:12.060Z,1509675132.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:12.448Z,1509675132.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:12.463Z,1509675132.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:12.840Z,1509675132.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:12.856Z,1509675132.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:13.226Z,1509675133.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:13.306Z,1509675133.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:13.642Z,1509675133.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:13.657Z,1509675133.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:14.053Z,1509675134.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:14.068Z,1509675134.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:14.448Z,1509675134.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:14.506Z,1509675134.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:14.827Z,1509675134.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:14.853Z,1509675134.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:15.222Z,1509675135.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:15.275Z,1509675135.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:15.648Z,1509675135.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:15.703Z,1509675135.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:16.044Z,1509675136.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:16.059Z,1509675136.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:16.447Z,1509675136.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:16.467Z,1509675136.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:16.828Z,1509675136.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:16.854Z,1509675136.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:17.224Z,1509675137.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:17.262Z,1509675137.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:17.648Z,1509675137.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:17.663Z,1509675137.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:18.046Z,1509675138.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:18.061Z,1509675138.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:18.442Z,1509675138.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:18.462Z,1509675138.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:18.828Z,1509675138.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:18.857Z,1509675138.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:19.224Z,1509675139.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:19.253Z,1509675139.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:19.647Z,1509675139.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:19.661Z,1509675139.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:20.105Z,1509675140.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:20.121Z,1509675140.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:20.448Z,1509675140.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:20.463Z,1509675140.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:20.829Z,1509675140.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:20.857Z,1509675140.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:20.857Z,1509675140.857 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2017-11-03T02:12:20.857Z,1509675140.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:12:20.859Z,1509675140.859 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:20.859Z,1509675140.859 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2017-11-03T02:12:20.859Z,1509675140.859 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:12:20.861Z,1509675140.861 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:20.861Z,1509675140.861 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2017-11-03T02:12:20.861Z,1509675140.861 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:12:20.957Z,1509675140.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:12:20.957Z,1509675140.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:12:20.957Z,1509675140.957 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:12:21.218Z,1509675141.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:21.324Z,1509675141.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:12:21.325Z,1509675141.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2017-11-03T02:12:21.325Z,1509675141.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:12:21.325Z,1509675141.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2017-11-03T02:12:21.326Z,1509675141.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:12:21.326Z,1509675141.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2017-11-03T02:12:21.649Z,1509675141.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:21.663Z,1509675141.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:12:21.664Z,1509675141.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:12:21.664Z,1509675141.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:12:21.665Z,1509675141.665 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:12:21.665Z,1509675141.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:12:21.665Z,1509675141.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:12:21.666Z,1509675141.666 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:12:21.666Z,1509675141.666 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:12:21.666Z,1509675141.666 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:12:22.038Z,1509675142.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:22.066Z,1509675142.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:12:22.067Z,1509675142.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:22.439Z,1509675142.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:22.465Z,1509675142.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:12:22.466Z,1509675142.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:22.827Z,1509675142.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:22.842Z,1509675142.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:12:22.843Z,1509675142.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:23.226Z,1509675143.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:23.240Z,1509675143.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:12:23.241Z,1509675143.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:23.638Z,1509675143.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:23.666Z,1509675143.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:12:23.667Z,1509675143.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:24.043Z,1509675144.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:24.065Z,1509675144.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:12:24.066Z,1509675144.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:24.439Z,1509675144.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:24.465Z,1509675144.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:12:24.466Z,1509675144.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:24.832Z,1509675144.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:24.847Z,1509675144.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:12:24.848Z,1509675144.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:25.227Z,1509675145.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:25.267Z,1509675145.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:12:25.269Z,1509675145.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:25.639Z,1509675145.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:25.672Z,1509675145.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:12:25.673Z,1509675145.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:26.039Z,1509675146.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:26.071Z,1509675146.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:12:26.072Z,1509675146.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:26.445Z,1509675146.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:26.470Z,1509675146.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:12:26.471Z,1509675146.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:26.829Z,1509675146.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:26.873Z,1509675146.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:12:26.874Z,1509675146.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:27.231Z,1509675147.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:27.248Z,1509675147.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:12:27.249Z,1509675147.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:27.642Z,1509675147.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:27.698Z,1509675147.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:12:27.699Z,1509675147.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:28.045Z,1509675148.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:28.091Z,1509675148.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:12:28.092Z,1509675148.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:28.439Z,1509675148.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:28.472Z,1509675148.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:12:28.473Z,1509675148.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:28.831Z,1509675148.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:28.881Z,1509675148.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:12:28.882Z,1509675148.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:29.230Z,1509675149.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:29.244Z,1509675149.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:12:29.245Z,1509675149.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:29.610Z,1509675149.610 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T02:12:29.610Z,1509675149.610 [NAL9602] Data Fault, FailCount= 1
2017-11-03T02:12:29.610Z,1509675149.610 [NAL9602](ERROR): Data Fault
2017-11-03T02:12:29.629Z,1509675149.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:29.689Z,1509675149.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:12:29.690Z,1509675149.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:29.773Z,1509675149.773 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T02:12:30.014Z,1509675150.014 [NAL9602](INFO): Powering down
2017-11-03T02:12:30.032Z,1509675150.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:30.109Z,1509675150.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T02:12:30.110Z,1509675150.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:30.430Z,1509675150.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:30.438Z,1509675150.438 [PNI_TCM](ERROR): CRC does not match. Expected:0x61105 got:0x45564
2017-11-03T02:12:30.471Z,1509675150.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:12:30.472Z,1509675150.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:30.830Z,1509675150.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:30.845Z,1509675150.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:12:30.846Z,1509675150.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:30.940Z,1509675150.940 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T02:12:30.941Z,1509675150.941 [NAL9602] No Fault, FailCount= 1
2017-11-03T02:12:31.233Z,1509675151.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:31.248Z,1509675151.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:12:31.249Z,1509675151.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:31.624Z,1509675151.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:31.668Z,1509675151.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:12:31.669Z,1509675151.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:32.023Z,1509675152.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:32.043Z,1509675152.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:12:32.043Z,1509675152.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:32.426Z,1509675152.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:32.441Z,1509675152.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:12:32.442Z,1509675152.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:32.826Z,1509675152.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:32.840Z,1509675152.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:12:32.841Z,1509675152.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:33.224Z,1509675153.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:33.269Z,1509675153.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:12:33.270Z,1509675153.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:33.629Z,1509675153.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:33.647Z,1509675153.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:12:33.648Z,1509675153.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:34.026Z,1509675154.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:34.041Z,1509675154.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:12:34.042Z,1509675154.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:34.426Z,1509675154.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:34.441Z,1509675154.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:12:34.442Z,1509675154.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:34.830Z,1509675154.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:34.871Z,1509675154.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:12:34.872Z,1509675154.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:35.223Z,1509675155.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:35.232Z,1509675155.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x37774 got:0x1797
2017-11-03T02:12:35.251Z,1509675155.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:12:35.252Z,1509675155.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:35.629Z,1509675155.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:35.635Z,1509675155.635 [PNI_TCM](ERROR): CRC does not match. Expected:0x58325 got:0x38172
2017-11-03T02:12:35.678Z,1509675155.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:12:35.679Z,1509675155.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:36.031Z,1509675156.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:36.045Z,1509675156.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:12:36.046Z,1509675156.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:36.423Z,1509675156.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:36.449Z,1509675156.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:12:36.450Z,1509675156.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:36.828Z,1509675156.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:36.846Z,1509675156.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:12:36.847Z,1509675156.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:37.232Z,1509675157.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:37.247Z,1509675157.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:12:37.248Z,1509675157.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:37.626Z,1509675157.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:37.641Z,1509675157.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:12:37.642Z,1509675157.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:38.027Z,1509675158.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:38.068Z,1509675158.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:12:38.069Z,1509675158.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:38.430Z,1509675158.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:38.446Z,1509675158.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:12:38.447Z,1509675158.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:38.833Z,1509675158.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:38.847Z,1509675158.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:12:38.848Z,1509675158.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:39.233Z,1509675159.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:39.247Z,1509675159.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:12:39.249Z,1509675159.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:39.623Z,1509675159.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:39.649Z,1509675159.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:12:39.650Z,1509675159.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:40.032Z,1509675160.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:40.049Z,1509675160.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:12:40.050Z,1509675160.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:40.426Z,1509675160.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:40.442Z,1509675160.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:12:40.443Z,1509675160.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:40.831Z,1509675160.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:40.846Z,1509675160.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T02:12:40.847Z,1509675160.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:41.223Z,1509675161.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:41.268Z,1509675161.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:41.623Z,1509675161.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:41.642Z,1509675161.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:42.029Z,1509675162.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:42.090Z,1509675162.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:42.476Z,1509675162.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:42.875Z,1509675162.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:43.241Z,1509675163.241 [PNI_TCM](ERROR): CRC does not match. Expected:0x11573 got:0x2332
2017-11-03T02:12:43.284Z,1509675163.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:43.635Z,1509675163.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:43.649Z,1509675163.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:44.036Z,1509675164.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:44.087Z,1509675164.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:44.432Z,1509675164.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:44.490Z,1509675164.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:44.843Z,1509675164.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x31985 got:0x65202
2017-11-03T02:12:44.863Z,1509675164.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:45.246Z,1509675165.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:45.650Z,1509675165.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:46.063Z,1509675166.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:46.443Z,1509675166.443 [PNI_TCM](ERROR): CRC does not match. Expected:0x64601 got:0x7361
2017-11-03T02:12:46.478Z,1509675166.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:46.849Z,1509675166.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:47.245Z,1509675167.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:47.654Z,1509675167.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:48.051Z,1509675168.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:48.452Z,1509675168.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:48.851Z,1509675168.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:49.259Z,1509675169.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:49.638Z,1509675169.638 [PNI_TCM](ERROR): CRC does not match. Expected:0x6519 got:0x6210
2017-11-03T02:12:49.655Z,1509675169.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:50.052Z,1509675170.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:50.450Z,1509675170.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:50.859Z,1509675170.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:51.238Z,1509675171.238 [PNI_TCM](ERROR): CRC does not match. Expected:0x45620 got:0x6593
2017-11-03T02:12:51.263Z,1509675171.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:51.650Z,1509675171.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:52.049Z,1509675172.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:52.473Z,1509675172.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:52.841Z,1509675172.841 [PNI_TCM](ERROR): CRC does not match. Expected:0x59513 got:0x7361
2017-11-03T02:12:52.859Z,1509675172.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:53.250Z,1509675173.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:53.651Z,1509675173.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:54.075Z,1509675174.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:54.442Z,1509675174.442 [PNI_TCM](ERROR): CRC does not match. Expected:0x38602 got:0x6593
2017-11-03T02:12:54.459Z,1509675174.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:54.849Z,1509675174.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:55.249Z,1509675175.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:55.633Z,1509675175.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:55.678Z,1509675175.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:56.036Z,1509675176.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:56.043Z,1509675176.043 [PNI_TCM](ERROR): CRC does not match. Expected:0x26568 got:0x7106
2017-11-03T02:12:56.079Z,1509675176.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:56.438Z,1509675176.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:56.453Z,1509675176.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:59.511Z,1509675179.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:59.610Z,1509675179.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:12:59.748Z,1509675179.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:12:59.763Z,1509675179.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:00.128Z,1509675180.128 [NAL9602](INFO): Powering up NAL9602
2017-11-03T02:13:00.146Z,1509675180.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:00.161Z,1509675180.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:00.550Z,1509675180.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:00.596Z,1509675180.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:00.944Z,1509675180.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:00.959Z,1509675180.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:01.344Z,1509675181.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:01.395Z,1509675181.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:01.744Z,1509675181.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:01.802Z,1509675181.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:02.144Z,1509675182.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:02.159Z,1509675182.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:02.550Z,1509675182.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:02.586Z,1509675182.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:02.944Z,1509675182.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:02.962Z,1509675182.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:03.344Z,1509675183.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:03.359Z,1509675183.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:03.743Z,1509675183.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:13:03.758Z,1509675183.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:04.184Z,1509675184.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:04.559Z,1509675184.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:04.958Z,1509675184.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:05.359Z,1509675185.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:05.759Z,1509675185.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:06.184Z,1509675186.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:06.563Z,1509675186.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:06.959Z,1509675186.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:07.358Z,1509675187.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:07.763Z,1509675187.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:08.159Z,1509675188.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:08.557Z,1509675188.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:08.959Z,1509675188.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:09.359Z,1509675189.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:09.783Z,1509675189.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:10.183Z,1509675190.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:10.587Z,1509675190.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:10.932Z,1509675190.932 [NAL9602](INFO): NAL9602 initialized
2017-11-03T02:13:10.980Z,1509675190.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:11.367Z,1509675191.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:11.789Z,1509675191.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:12.187Z,1509675192.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:12.585Z,1509675192.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:12.962Z,1509675192.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:13.359Z,1509675193.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:13.799Z,1509675193.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:14.214Z,1509675194.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:14.566Z,1509675194.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:15.010Z,1509675195.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:15.375Z,1509675195.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:15.807Z,1509675195.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:16.207Z,1509675196.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:16.568Z,1509675196.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:16.969Z,1509675196.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:17.375Z,1509675197.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:17.775Z,1509675197.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:18.176Z,1509675198.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:18.575Z,1509675198.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:18.971Z,1509675198.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:19.369Z,1509675199.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:19.775Z,1509675199.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:20.166Z,1509675200.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:20.570Z,1509675200.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:20.977Z,1509675200.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:21.376Z,1509675201.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:21.783Z,1509675201.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:22.165Z,1509675202.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:22.566Z,1509675202.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:22.971Z,1509675202.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:23.371Z,1509675203.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:23.778Z,1509675203.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:24.183Z,1509675204.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:24.576Z,1509675204.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:24.981Z,1509675204.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:25.370Z,1509675205.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:25.771Z,1509675205.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:26.173Z,1509675206.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:26.569Z,1509675206.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:26.983Z,1509675206.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:27.377Z,1509675207.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:27.776Z,1509675207.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:28.174Z,1509675208.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:28.607Z,1509675208.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:28.969Z,1509675208.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:29.362Z,1509675209.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:29.777Z,1509675209.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:30.179Z,1509675210.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:30.579Z,1509675210.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:30.971Z,1509675210.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:31.360Z,1509675211.360 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:13:31.361Z,1509675211.361 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:13:31.361Z,1509675211.361 [BPC1](ERROR): Communications Fault
2017-11-03T02:13:31.369Z,1509675211.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:31.469Z,1509675211.469 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:13:31.770Z,1509675211.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:32.173Z,1509675212.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:32.575Z,1509675212.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:32.653Z,1509675212.653 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:13:32.653Z,1509675212.653 [BPC1] No Fault, FailCount= 1
2017-11-03T02:13:33.031Z,1509675213.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:33.384Z,1509675213.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:33.780Z,1509675213.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:34.169Z,1509675214.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:34.570Z,1509675214.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:34.969Z,1509675214.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:35.369Z,1509675215.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:35.781Z,1509675215.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:36.180Z,1509675216.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:36.586Z,1509675216.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:36.970Z,1509675216.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:37.414Z,1509675217.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:37.769Z,1509675217.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:38.171Z,1509675218.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:38.569Z,1509675218.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:38.980Z,1509675218.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:39.385Z,1509675219.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:39.781Z,1509675219.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:40.168Z,1509675220.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:40.569Z,1509675220.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:40.970Z,1509675220.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:41.368Z,1509675221.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:41.781Z,1509675221.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:42.179Z,1509675222.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:42.579Z,1509675222.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:42.970Z,1509675222.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:43.369Z,1509675223.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:43.774Z,1509675223.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:44.172Z,1509675224.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:44.573Z,1509675224.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:44.976Z,1509675224.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:45.381Z,1509675225.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:45.781Z,1509675225.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:46.174Z,1509675226.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:46.573Z,1509675226.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:46.971Z,1509675226.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:47.374Z,1509675227.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:47.787Z,1509675227.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:48.227Z,1509675228.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:48.586Z,1509675228.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:48.980Z,1509675228.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:49.359Z,1509675229.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:49.780Z,1509675229.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:50.176Z,1509675230.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:50.595Z,1509675230.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:51.003Z,1509675231.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:51.387Z,1509675231.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:51.787Z,1509675231.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:52.179Z,1509675232.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:52.581Z,1509675232.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:52.973Z,1509675232.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:53.379Z,1509675233.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:53.787Z,1509675233.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:54.180Z,1509675234.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:54.581Z,1509675234.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:54.959Z,1509675234.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:55.371Z,1509675235.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:55.764Z,1509675235.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:55.767Z,1509675235.767 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T02:08:55.7Z
2017-11-03T02:13:55.767Z,1509675235.767 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T02:13:55.767Z,1509675235.767 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T02:13:56.167Z,1509675236.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:56.673Z,1509675236.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:59.672Z,1509675239.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:13:59.769Z,1509675239.769 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0048.lzma
2017-11-03T02:13:59.851Z,1509675239.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:00.223Z,1509675240.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:00.569Z,1509675240.569 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0048.lzma.bak
2017-11-03T02:14:00.569Z,1509675240.569 [DataOverHttps](INFO): SBD MOMSN=5182461
2017-11-03T02:14:00.646Z,1509675240.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:01.221Z,1509675241.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:01.415Z,1509675241.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:04.583Z,1509675244.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:04.759Z,1509675244.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:05.151Z,1509675245.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:05.563Z,1509675245.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:05.924Z,1509675245.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:06.370Z,1509675246.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:09.447Z,1509675249.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:09.557Z,1509675249.557 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20171103T001125/Express0049.lzma
2017-11-03T02:14:09.651Z,1509675249.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:10.012Z,1509675250.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:10.355Z,1509675250.355 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0049.lzma.bak
2017-11-03T02:14:10.355Z,1509675250.355 [DataOverHttps](INFO): SBD MOMSN=5182463
2017-11-03T02:14:10.416Z,1509675250.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:11.007Z,1509675251.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:11.010Z,1509675251.010 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T02:14:11.010Z,1509675251.010 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T02:14:11.010Z,1509675251.010 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T02:14:11.222Z,1509675251.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:14.300Z,1509675254.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:14.477Z,1509675254.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:14.871Z,1509675254.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:15.259Z,1509675255.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:15.662Z,1509675255.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:16.062Z,1509675256.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:16.470Z,1509675256.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:16.875Z,1509675256.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:17.274Z,1509675257.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:17.679Z,1509675257.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:18.063Z,1509675258.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:18.467Z,1509675258.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:18.866Z,1509675258.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:19.265Z,1509675259.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:19.663Z,1509675259.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:20.113Z,1509675260.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:20.474Z,1509675260.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:20.873Z,1509675260.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:21.275Z,1509675261.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:21.660Z,1509675261.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:22.074Z,1509675262.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:22.497Z,1509675262.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:22.879Z,1509675262.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:23.303Z,1509675263.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:23.698Z,1509675263.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:24.063Z,1509675264.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:24.462Z,1509675264.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:24.863Z,1509675264.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:25.264Z,1509675265.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:25.662Z,1509675265.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:26.076Z,1509675266.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:26.472Z,1509675266.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:26.875Z,1509675266.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:27.261Z,1509675267.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:27.660Z,1509675267.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:28.064Z,1509675268.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:28.469Z,1509675268.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:28.872Z,1509675268.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:29.277Z,1509675269.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:29.677Z,1509675269.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:30.066Z,1509675270.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:30.473Z,1509675270.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:30.871Z,1509675270.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:31.262Z,1509675271.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:31.665Z,1509675271.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:32.078Z,1509675272.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:32.469Z,1509675272.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:32.869Z,1509675272.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:33.265Z,1509675273.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:33.667Z,1509675273.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:34.091Z,1509675274.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:34.465Z,1509675274.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:34.879Z,1509675274.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:35.277Z,1509675275.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:35.711Z,1509675275.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:36.048Z,1509675276.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:36.456Z,1509675276.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:36.886Z,1509675276.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:37.257Z,1509675277.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:37.695Z,1509675277.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:38.102Z,1509675278.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:38.496Z,1509675278.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:38.864Z,1509675278.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:39.251Z,1509675279.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:39.666Z,1509675279.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:40.046Z,1509675280.046 [PNI_TCM](ERROR): CRC does not match. Expected:0x43679 got:0x7106
2017-11-03T02:14:40.071Z,1509675280.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:40.458Z,1509675280.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:40.864Z,1509675280.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:41.267Z,1509675281.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:41.674Z,1509675281.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:42.054Z,1509675282.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:42.459Z,1509675282.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:42.879Z,1509675282.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:43.245Z,1509675283.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x7690 got:0x16857
2017-11-03T02:14:43.282Z,1509675283.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:43.663Z,1509675283.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:44.084Z,1509675284.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:44.483Z,1509675284.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:44.880Z,1509675284.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:45.258Z,1509675285.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:45.654Z,1509675285.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:46.058Z,1509675286.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:46.458Z,1509675286.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:46.864Z,1509675286.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:47.283Z,1509675287.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:47.674Z,1509675287.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:48.056Z,1509675288.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:48.458Z,1509675288.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:48.895Z,1509675288.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:49.264Z,1509675289.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:49.664Z,1509675289.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:50.105Z,1509675290.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:50.463Z,1509675290.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:50.871Z,1509675290.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:51.287Z,1509675291.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:51.662Z,1509675291.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:52.095Z,1509675292.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:52.494Z,1509675292.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:52.867Z,1509675292.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:53.268Z,1509675293.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:53.663Z,1509675293.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:54.067Z,1509675294.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:54.466Z,1509675294.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:54.862Z,1509675294.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:55.260Z,1509675295.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:55.662Z,1509675295.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:56.066Z,1509675296.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:56.471Z,1509675296.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:56.864Z,1509675296.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:57.262Z,1509675297.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:57.658Z,1509675297.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:58.071Z,1509675298.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:58.459Z,1509675298.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:58.871Z,1509675298.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:59.265Z,1509675299.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:14:59.689Z,1509675299.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:00.061Z,1509675300.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:00.461Z,1509675300.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:00.865Z,1509675300.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:01.259Z,1509675301.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:01.661Z,1509675301.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:02.070Z,1509675302.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:02.468Z,1509675302.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:02.922Z,1509675302.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:03.259Z,1509675303.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:03.662Z,1509675303.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:04.066Z,1509675304.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:04.491Z,1509675304.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:04.868Z,1509675304.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:05.275Z,1509675305.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:05.695Z,1509675305.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:06.064Z,1509675306.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:06.498Z,1509675306.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:06.898Z,1509675306.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:07.267Z,1509675307.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:07.662Z,1509675307.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:08.068Z,1509675308.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:08.470Z,1509675308.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:08.873Z,1509675308.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:09.264Z,1509675309.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:09.667Z,1509675309.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:10.063Z,1509675310.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:10.459Z,1509675310.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:10.869Z,1509675310.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:11.267Z,1509675311.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:11.670Z,1509675311.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:14.759Z,1509675314.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:14.901Z,1509675314.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:15.320Z,1509675315.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:15.724Z,1509675315.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:16.117Z,1509675316.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:16.510Z,1509675316.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:16.908Z,1509675316.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:17.310Z,1509675317.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:17.759Z,1509675317.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:18.117Z,1509675318.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:18.517Z,1509675318.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:18.927Z,1509675318.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:19.311Z,1509675319.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:19.723Z,1509675319.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:20.139Z,1509675320.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:20.515Z,1509675320.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:20.938Z,1509675320.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:21.331Z,1509675321.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:21.723Z,1509675321.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:21.723Z,1509675321.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2017-11-03T02:15:21.723Z,1509675321.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:15:21.725Z,1509675321.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:21.725Z,1509675321.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2017-11-03T02:15:21.725Z,1509675321.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:15:21.727Z,1509675321.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:21.727Z,1509675321.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2017-11-03T02:15:21.727Z,1509675321.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:15:21.818Z,1509675321.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:15:21.818Z,1509675321.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:15:21.818Z,1509675321.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:15:22.221Z,1509675322.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:15:22.221Z,1509675322.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2017-11-03T02:15:22.222Z,1509675322.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:15:22.222Z,1509675322.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2017-11-03T02:15:22.222Z,1509675322.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:15:22.222Z,1509675322.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2017-11-03T02:15:22.529Z,1509675322.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:15:22.530Z,1509675322.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:15:22.530Z,1509675322.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:15:22.530Z,1509675322.530 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:15:22.531Z,1509675322.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:15:22.531Z,1509675322.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:15:22.531Z,1509675322.531 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:15:22.532Z,1509675322.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:15:22.532Z,1509675322.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:15:22.899Z,1509675322.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:15:22.900Z,1509675322.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:23.302Z,1509675323.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:15:23.303Z,1509675323.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:23.726Z,1509675323.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:15:23.727Z,1509675323.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:24.123Z,1509675324.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:15:24.124Z,1509675324.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:24.521Z,1509675324.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:15:24.522Z,1509675324.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:24.898Z,1509675324.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:15:24.899Z,1509675324.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:25.294Z,1509675325.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:15:25.295Z,1509675325.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:25.721Z,1509675325.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:15:25.722Z,1509675325.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:26.122Z,1509675326.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:15:26.123Z,1509675326.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:26.522Z,1509675326.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:15:26.523Z,1509675326.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:26.899Z,1509675326.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:15:26.900Z,1509675326.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:27.297Z,1509675327.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:15:27.298Z,1509675327.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:27.721Z,1509675327.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:15:27.722Z,1509675327.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:28.122Z,1509675328.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:15:28.122Z,1509675328.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:28.522Z,1509675328.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:15:28.523Z,1509675328.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:28.899Z,1509675328.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:15:28.900Z,1509675328.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:29.298Z,1509675329.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:15:29.299Z,1509675329.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:29.722Z,1509675329.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:15:29.723Z,1509675329.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:30.123Z,1509675330.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:15:30.125Z,1509675330.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:30.521Z,1509675330.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:15:30.522Z,1509675330.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:30.899Z,1509675330.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:15:30.900Z,1509675330.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:31.302Z,1509675331.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:15:31.303Z,1509675331.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:31.746Z,1509675331.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:15:31.747Z,1509675331.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:32.128Z,1509675332.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:15:32.129Z,1509675332.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:32.504Z,1509675332.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:15:32.505Z,1509675332.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:32.899Z,1509675332.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:15:32.900Z,1509675332.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:33.299Z,1509675333.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:15:33.300Z,1509675333.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:33.738Z,1509675333.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:15:33.739Z,1509675333.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:34.108Z,1509675334.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:15:34.109Z,1509675334.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:34.553Z,1509675334.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:15:34.554Z,1509675334.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:34.906Z,1509675334.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:15:34.907Z,1509675334.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:35.334Z,1509675335.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:15:35.335Z,1509675335.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:35.708Z,1509675335.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:15:35.709Z,1509675335.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:36.134Z,1509675336.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:15:36.135Z,1509675336.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:36.508Z,1509675336.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:15:36.509Z,1509675336.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:36.910Z,1509675336.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:15:36.911Z,1509675336.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:37.302Z,1509675337.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:15:37.303Z,1509675337.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:37.708Z,1509675337.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:15:37.709Z,1509675337.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:38.131Z,1509675338.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:15:38.132Z,1509675338.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:38.504Z,1509675338.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:15:38.505Z,1509675338.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:38.902Z,1509675338.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:15:38.903Z,1509675338.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:39.302Z,1509675339.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:15:39.303Z,1509675339.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:39.704Z,1509675339.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:15:39.705Z,1509675339.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:40.107Z,1509675340.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:15:40.109Z,1509675340.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:40.508Z,1509675340.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:15:40.509Z,1509675340.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:40.901Z,1509675340.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:15:40.902Z,1509675340.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:41.303Z,1509675341.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:15:41.304Z,1509675341.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:41.731Z,1509675341.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:42.105Z,1509675342.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:42.508Z,1509675342.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:42.905Z,1509675342.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:43.307Z,1509675343.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:43.730Z,1509675343.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:44.129Z,1509675344.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:44.531Z,1509675344.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:44.904Z,1509675344.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:45.303Z,1509675345.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:45.709Z,1509675345.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:46.108Z,1509675346.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:46.509Z,1509675346.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:46.950Z,1509675346.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:47.305Z,1509675347.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:47.731Z,1509675347.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:48.158Z,1509675348.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:48.531Z,1509675348.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:48.904Z,1509675348.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:49.335Z,1509675349.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:49.708Z,1509675349.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:50.150Z,1509675350.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:50.225Z,1509675350.225 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:15:50.225Z,1509675350.225 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T02:15:50.352Z,1509675350.352 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:15:50.353Z,1509675350.353 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:15:50.353Z,1509675350.353 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:15:50.353Z,1509675350.353 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:15:50.547Z,1509675350.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:50.911Z,1509675350.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:51.342Z,1509675351.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:51.707Z,1509675351.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:52.149Z,1509675352.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:52.523Z,1509675352.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:52.915Z,1509675352.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:53.323Z,1509675353.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:53.736Z,1509675353.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:54.155Z,1509675354.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:54.572Z,1509675354.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:54.715Z,1509675354.715 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:15:54.775Z,1509675354.775 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:15:54.776Z,1509675354.776 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:15:54.777Z,1509675354.777 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:15:54.777Z,1509675354.777 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:15:54.938Z,1509675354.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:55.354Z,1509675355.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:55.733Z,1509675355.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:56.121Z,1509675356.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:56.536Z,1509675356.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:56.937Z,1509675356.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:57.351Z,1509675357.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:57.809Z,1509675357.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:58.151Z,1509675358.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:58.550Z,1509675358.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:58.915Z,1509675358.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:59.354Z,1509675359.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:15:59.750Z,1509675359.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:00.122Z,1509675360.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:00.540Z,1509675360.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:00.914Z,1509675360.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:01.411Z,1509675361.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:01.732Z,1509675361.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:02.146Z,1509675362.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:02.525Z,1509675362.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:02.899Z,1509675362.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:03.294Z,1509675363.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:03.717Z,1509675363.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:04.118Z,1509675364.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:04.518Z,1509675364.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:04.897Z,1509675364.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:05.317Z,1509675365.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:05.712Z,1509675365.712 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:16:05.712Z,1509675365.712 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:16:05.712Z,1509675365.712 [BPC1](ERROR): Communications Fault
2017-11-03T02:16:05.720Z,1509675365.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:05.804Z,1509675365.804 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:16:06.123Z,1509675366.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:06.517Z,1509675366.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:06.894Z,1509675366.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:06.984Z,1509675366.984 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:16:06.984Z,1509675366.984 [BPC1] No Fault, FailCount= 1
2017-11-03T02:16:07.371Z,1509675367.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:07.695Z,1509675367.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:08.118Z,1509675368.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:08.517Z,1509675368.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:08.917Z,1509675368.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:09.317Z,1509675369.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:09.719Z,1509675369.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:10.118Z,1509675370.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:10.494Z,1509675370.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:10.923Z,1509675370.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:11.323Z,1509675371.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:11.750Z,1509675371.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:14.917Z,1509675374.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:15.073Z,1509675375.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:15.482Z,1509675375.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:15.885Z,1509675375.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:16.281Z,1509675376.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:16.673Z,1509675376.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:17.072Z,1509675377.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:17.473Z,1509675377.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:17.886Z,1509675377.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:18.280Z,1509675378.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:18.681Z,1509675378.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:19.055Z,1509675379.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:19.475Z,1509675379.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:19.883Z,1509675379.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:20.283Z,1509675380.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:20.680Z,1509675380.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:21.130Z,1509675381.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:21.486Z,1509675381.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:21.883Z,1509675381.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:22.287Z,1509675382.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:22.658Z,1509675382.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:23.126Z,1509675383.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:23.463Z,1509675383.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:23.899Z,1509675383.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:24.285Z,1509675384.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:24.718Z,1509675384.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:25.162Z,1509675385.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:25.467Z,1509675385.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:25.867Z,1509675385.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:26.258Z,1509675386.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:26.667Z,1509675386.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:27.135Z,1509675387.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:27.482Z,1509675387.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:27.879Z,1509675387.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:28.275Z,1509675388.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:28.663Z,1509675388.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:29.070Z,1509675389.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:29.465Z,1509675389.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:29.876Z,1509675389.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:30.276Z,1509675390.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:30.679Z,1509675390.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:31.070Z,1509675391.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:31.471Z,1509675391.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:31.874Z,1509675391.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:32.261Z,1509675392.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:32.670Z,1509675392.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:33.073Z,1509675393.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:33.482Z,1509675393.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:33.872Z,1509675393.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:34.259Z,1509675394.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:34.661Z,1509675394.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:35.101Z,1509675395.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:35.467Z,1509675395.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:35.899Z,1509675395.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:36.272Z,1509675396.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:36.672Z,1509675396.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:37.112Z,1509675397.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:37.467Z,1509675397.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:37.894Z,1509675397.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:38.262Z,1509675398.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:38.703Z,1509675398.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:39.117Z,1509675399.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:39.540Z,1509675399.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:39.879Z,1509675399.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:40.259Z,1509675400.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:40.672Z,1509675400.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:41.119Z,1509675401.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:41.487Z,1509675401.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:41.879Z,1509675401.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:42.290Z,1509675402.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:42.691Z,1509675402.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:43.065Z,1509675403.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:43.491Z,1509675403.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:43.863Z,1509675403.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:44.263Z,1509675404.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:44.663Z,1509675404.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:45.090Z,1509675405.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:45.489Z,1509675405.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:45.877Z,1509675405.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:46.276Z,1509675406.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:46.677Z,1509675406.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:47.079Z,1509675407.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:47.459Z,1509675407.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:47.895Z,1509675407.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:48.282Z,1509675408.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:48.682Z,1509675408.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:49.126Z,1509675409.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:49.488Z,1509675409.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:49.859Z,1509675409.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:50.306Z,1509675410.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:50.689Z,1509675410.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:51.154Z,1509675411.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:51.476Z,1509675411.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:51.876Z,1509675411.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:52.299Z,1509675412.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:52.662Z,1509675412.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:53.159Z,1509675413.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:53.504Z,1509675413.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:53.895Z,1509675413.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:54.294Z,1509675414.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:54.689Z,1509675414.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:55.134Z,1509675415.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:55.467Z,1509675415.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:55.867Z,1509675415.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:56.269Z,1509675416.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:56.667Z,1509675416.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:57.072Z,1509675417.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:57.479Z,1509675417.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:57.873Z,1509675417.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:58.271Z,1509675418.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:58.667Z,1509675418.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:59.075Z,1509675419.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:59.468Z,1509675419.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:16:59.871Z,1509675419.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:00.276Z,1509675420.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:00.672Z,1509675420.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:01.067Z,1509675421.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:01.469Z,1509675421.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:01.871Z,1509675421.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:02.269Z,1509675422.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:02.677Z,1509675422.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:03.112Z,1509675423.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:03.471Z,1509675423.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:03.873Z,1509675423.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:04.267Z,1509675424.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:04.707Z,1509675424.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:05.117Z,1509675425.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:05.470Z,1509675425.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:05.918Z,1509675425.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:06.276Z,1509675426.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:06.673Z,1509675426.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:07.162Z,1509675427.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:07.468Z,1509675427.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:07.902Z,1509675427.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:08.269Z,1509675428.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:08.698Z,1509675428.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:09.161Z,1509675429.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:09.472Z,1509675429.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:09.873Z,1509675429.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:10.268Z,1509675430.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:10.668Z,1509675430.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:11.075Z,1509675431.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:11.465Z,1509675431.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:11.873Z,1509675431.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:15.149Z,1509675435.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:15.325Z,1509675435.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:15.719Z,1509675435.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:16.114Z,1509675436.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:16.519Z,1509675436.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:16.934Z,1509675436.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:17.328Z,1509675437.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:17.725Z,1509675437.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:18.115Z,1509675438.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:18.519Z,1509675438.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:18.913Z,1509675438.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:19.335Z,1509675439.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:19.724Z,1509675439.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:20.124Z,1509675440.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:20.571Z,1509675440.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:20.910Z,1509675440.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:21.323Z,1509675441.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:21.766Z,1509675441.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:22.127Z,1509675442.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:22.567Z,1509675442.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:22.939Z,1509675442.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:23.311Z,1509675443.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:23.724Z,1509675443.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:24.127Z,1509675444.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:24.524Z,1509675444.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:24.919Z,1509675444.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:25.361Z,1509675445.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:25.731Z,1509675445.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:26.125Z,1509675446.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:26.528Z,1509675446.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:26.921Z,1509675446.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:27.319Z,1509675447.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:27.726Z,1509675447.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:28.131Z,1509675448.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:28.531Z,1509675448.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:28.924Z,1509675448.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:29.303Z,1509675449.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:29.731Z,1509675449.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:30.131Z,1509675450.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:30.531Z,1509675450.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:30.924Z,1509675450.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:31.321Z,1509675451.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:31.731Z,1509675451.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:32.135Z,1509675452.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:32.534Z,1509675452.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:32.904Z,1509675452.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:33.328Z,1509675453.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:33.755Z,1509675453.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:34.135Z,1509675454.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:34.526Z,1509675454.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:34.951Z,1509675454.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:35.327Z,1509675455.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:35.726Z,1509675455.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:36.158Z,1509675456.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:36.526Z,1509675456.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:36.943Z,1509675456.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:37.359Z,1509675457.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:37.725Z,1509675457.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:38.126Z,1509675458.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:38.534Z,1509675458.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:38.908Z,1509675458.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:39.350Z,1509675459.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:39.727Z,1509675459.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:40.127Z,1509675460.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:40.527Z,1509675460.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:40.903Z,1509675460.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:41.303Z,1509675461.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:41.735Z,1509675461.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:42.125Z,1509675462.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:42.526Z,1509675462.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:42.927Z,1509675462.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:43.302Z,1509675463.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:43.739Z,1509675463.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:44.134Z,1509675464.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:44.536Z,1509675464.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:44.909Z,1509675464.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:45.338Z,1509675465.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:45.738Z,1509675465.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:46.135Z,1509675466.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:46.536Z,1509675466.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:46.910Z,1509675466.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:47.337Z,1509675467.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:47.759Z,1509675467.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:48.140Z,1509675468.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:48.536Z,1509675468.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:48.911Z,1509675468.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:49.354Z,1509675469.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:49.713Z,1509675469.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:50.141Z,1509675470.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:50.535Z,1509675470.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:50.672Z,1509675470.672 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:17:50.672Z,1509675470.672 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T02:17:50.672Z,1509675470.672 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:17:50.907Z,1509675470.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:17:50.908Z,1509675470.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:50.996Z,1509675470.996 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:17:51.077Z,1509675471.077 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:17:51.215Z,1509675471.215 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:17:51.347Z,1509675471.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:17:51.349Z,1509675471.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:51.758Z,1509675471.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:17:51.759Z,1509675471.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:52.141Z,1509675472.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:17:52.142Z,1509675472.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:52.536Z,1509675472.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:17:52.537Z,1509675472.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:52.625Z,1509675472.625 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:17:52.625Z,1509675472.625 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T02:17:52.828Z,1509675472.828 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:17:52.829Z,1509675472.829 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:17:52.829Z,1509675472.829 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:17:52.829Z,1509675472.829 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:17:52.940Z,1509675472.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:17:52.941Z,1509675472.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:53.308Z,1509675473.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:17:53.309Z,1509675473.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:53.740Z,1509675473.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:17:53.741Z,1509675473.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:54.120Z,1509675474.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:17:54.141Z,1509675474.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:54.513Z,1509675474.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:17:54.514Z,1509675474.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:54.911Z,1509675474.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:17:54.913Z,1509675474.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:55.308Z,1509675475.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:17:55.309Z,1509675475.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:55.720Z,1509675475.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:17:55.721Z,1509675475.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:56.120Z,1509675476.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:17:56.121Z,1509675476.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:56.521Z,1509675476.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:17:56.522Z,1509675476.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:56.954Z,1509675476.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:17:56.955Z,1509675476.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:57.064Z,1509675477.064 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:17:57.139Z,1509675477.139 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:17:57.140Z,1509675477.140 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:17:57.141Z,1509675477.141 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:17:57.141Z,1509675477.141 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:17:57.315Z,1509675477.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:17:57.317Z,1509675477.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:57.735Z,1509675477.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:58.126Z,1509675478.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:58.526Z,1509675478.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:58.914Z,1509675478.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:59.313Z,1509675479.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:17:59.725Z,1509675479.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:00.125Z,1509675480.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:00.525Z,1509675480.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:00.914Z,1509675480.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:01.312Z,1509675481.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:01.714Z,1509675481.714 [BPC1](ERROR): Failed to parse message.
2017-11-03T02:18:01.714Z,1509675481.714 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T02:18:01.714Z,1509675481.714 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:18:01.714Z,1509675481.714 [BPC1](ERROR): Data Fault
2017-11-03T02:18:01.723Z,1509675481.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:01.805Z,1509675481.805 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:18:02.135Z,1509675482.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:02.535Z,1509675482.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:02.915Z,1509675482.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:03.015Z,1509675483.015 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:18:03.015Z,1509675483.015 [BPC1] No Fault, FailCount= 1
2017-11-03T02:18:03.367Z,1509675483.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:03.725Z,1509675483.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:04.121Z,1509675484.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:04.566Z,1509675484.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:04.915Z,1509675484.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:05.323Z,1509675485.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:05.725Z,1509675485.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:06.135Z,1509675486.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:06.524Z,1509675486.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:06.916Z,1509675486.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:07.323Z,1509675487.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:07.721Z,1509675487.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:08.125Z,1509675488.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:08.535Z,1509675488.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:08.915Z,1509675488.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:09.316Z,1509675489.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:09.734Z,1509675489.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:10.121Z,1509675490.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:10.525Z,1509675490.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:10.915Z,1509675490.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:11.383Z,1509675491.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:11.724Z,1509675491.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:12.135Z,1509675492.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:15.376Z,1509675495.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:15.587Z,1509675495.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:15.931Z,1509675495.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:16.335Z,1509675496.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:16.782Z,1509675496.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:17.154Z,1509675497.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:17.574Z,1509675497.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:17.925Z,1509675497.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:18.369Z,1509675498.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:18.774Z,1509675498.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:19.155Z,1509675499.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:19.538Z,1509675499.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:19.935Z,1509675499.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:20.328Z,1509675500.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:20.737Z,1509675500.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:21.155Z,1509675501.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:21.536Z,1509675501.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:21.930Z,1509675501.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:22.329Z,1509675502.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:22.743Z,1509675502.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:22.743Z,1509675502.743 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2017-11-03T02:18:22.743Z,1509675502.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:18:22.745Z,1509675502.745 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:22.745Z,1509675502.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2017-11-03T02:18:22.745Z,1509675502.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:18:22.747Z,1509675502.747 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:22.747Z,1509675502.747 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2017-11-03T02:18:22.747Z,1509675502.747 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:18:22.827Z,1509675502.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:18:22.827Z,1509675502.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:18:22.827Z,1509675502.827 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:18:23.280Z,1509675503.280 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:18:23.281Z,1509675503.281 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2017-11-03T02:18:23.281Z,1509675503.281 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:18:23.281Z,1509675503.281 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2017-11-03T02:18:23.282Z,1509675503.282 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:18:23.282Z,1509675503.282 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2017-11-03T02:18:23.542Z,1509675503.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:18:23.542Z,1509675503.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:18:23.542Z,1509675503.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:18:23.543Z,1509675503.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:18:23.543Z,1509675503.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:18:23.543Z,1509675503.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:18:23.544Z,1509675503.544 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:18:23.544Z,1509675503.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:18:23.545Z,1509675503.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:18:23.938Z,1509675503.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:24.341Z,1509675504.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:24.737Z,1509675504.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:25.143Z,1509675505.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:25.543Z,1509675505.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:25.915Z,1509675505.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:26.315Z,1509675506.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:26.743Z,1509675506.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:27.143Z,1509675507.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:27.537Z,1509675507.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:27.919Z,1509675507.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:28.314Z,1509675508.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:28.747Z,1509675508.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:29.148Z,1509675509.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:29.621Z,1509675509.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:29.924Z,1509675509.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:30.327Z,1509675510.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:30.782Z,1509675510.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:31.159Z,1509675511.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:31.567Z,1509675511.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:31.926Z,1509675511.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:32.362Z,1509675512.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:32.767Z,1509675512.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:33.136Z,1509675513.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:33.531Z,1509675513.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:33.925Z,1509675513.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:34.331Z,1509675514.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:34.731Z,1509675514.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:35.167Z,1509675515.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:35.531Z,1509675515.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:35.925Z,1509675515.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:36.328Z,1509675516.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:36.731Z,1509675516.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:37.184Z,1509675517.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:37.532Z,1509675517.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:37.919Z,1509675517.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:38.336Z,1509675518.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:38.787Z,1509675518.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:39.143Z,1509675519.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:39.545Z,1509675519.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:39.933Z,1509675519.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:40.312Z,1509675520.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:40.741Z,1509675520.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:41.135Z,1509675521.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:41.537Z,1509675521.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:41.949Z,1509675521.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:42.315Z,1509675522.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:42.747Z,1509675522.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:43.147Z,1509675523.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:43.593Z,1509675523.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:43.927Z,1509675523.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:44.319Z,1509675524.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:44.767Z,1509675524.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:45.149Z,1509675525.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:45.548Z,1509675525.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:45.947Z,1509675525.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:46.327Z,1509675526.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:46.767Z,1509675526.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:47.199Z,1509675527.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:47.550Z,1509675527.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:47.925Z,1509675527.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:48.323Z,1509675528.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:48.750Z,1509675528.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:49.160Z,1509675529.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:49.534Z,1509675529.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:49.927Z,1509675529.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:50.327Z,1509675530.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:50.733Z,1509675530.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:51.182Z,1509675531.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:51.529Z,1509675531.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:51.926Z,1509675531.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:52.323Z,1509675532.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:52.729Z,1509675532.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:53.132Z,1509675533.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:53.528Z,1509675533.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:53.924Z,1509675533.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:54.342Z,1509675534.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:54.732Z,1509675534.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:55.132Z,1509675535.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:55.532Z,1509675535.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:55.927Z,1509675535.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:56.324Z,1509675536.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:56.747Z,1509675536.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:57.136Z,1509675537.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:57.536Z,1509675537.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:57.932Z,1509675537.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:58.328Z,1509675538.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:58.736Z,1509675538.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:59.217Z,1509675539.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:59.536Z,1509675539.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:18:59.959Z,1509675539.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:00.327Z,1509675540.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:00.773Z,1509675540.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:01.179Z,1509675541.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:01.542Z,1509675541.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:01.927Z,1509675541.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:02.329Z,1509675542.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:02.733Z,1509675542.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:03.151Z,1509675543.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:03.536Z,1509675543.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:03.927Z,1509675543.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:04.328Z,1509675544.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:04.736Z,1509675544.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:05.183Z,1509675545.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:05.535Z,1509675545.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:05.928Z,1509675545.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:06.330Z,1509675546.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:06.736Z,1509675546.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:07.135Z,1509675547.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:07.536Z,1509675547.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:07.927Z,1509675547.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:08.328Z,1509675548.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:08.737Z,1509675548.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:09.136Z,1509675549.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:09.535Z,1509675549.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:09.914Z,1509675549.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:10.319Z,1509675550.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:10.743Z,1509675550.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:11.143Z,1509675551.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:11.583Z,1509675551.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:11.605Z,1509675551.605 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T02:19:11.605Z,1509675551.605 [Default:CheckIn:C.Wait] Stopped
2017-11-03T02:19:11.605Z,1509675551.605 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T02:19:11.605Z,1509675551.605 [Default:CheckIn:D] Running Loop=1
2017-11-03T02:19:11.925Z,1509675551.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:11.928Z,1509675551.928 [Default:CheckIn:D] Stopped
2017-11-03T02:19:11.928Z,1509675551.928 [Default:CheckIn:E] Running Loop=1
2017-11-03T02:19:12.329Z,1509675552.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:12.332Z,1509675552.332 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.072697 min 
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn:E] Stopped
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn] Stopped
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn](INFO): Running loop #13
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn] Running Loop=13
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T02:19:12.333Z,1509675552.333 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T02:19:15.655Z,1509675555.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:15.831Z,1509675555.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:16.251Z,1509675556.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:16.607Z,1509675556.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:17.090Z,1509675557.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:17.429Z,1509675557.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:17.859Z,1509675557.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:18.225Z,1509675558.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:18.630Z,1509675558.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:19.029Z,1509675559.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:19.418Z,1509675559.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:19.812Z,1509675559.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:20.215Z,1509675560.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:20.615Z,1509675560.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:21.020Z,1509675561.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:21.416Z,1509675561.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:21.823Z,1509675561.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:22.212Z,1509675562.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:22.615Z,1509675562.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:23.012Z,1509675563.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:23.407Z,1509675563.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:23.815Z,1509675563.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:24.216Z,1509675564.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:24.618Z,1509675564.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:25.013Z,1509675565.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:25.411Z,1509675565.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:25.826Z,1509675565.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:26.211Z,1509675566.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:26.613Z,1509675566.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:27.098Z,1509675567.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:27.416Z,1509675567.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:27.817Z,1509675567.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:28.213Z,1509675568.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:28.613Z,1509675568.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:29.063Z,1509675569.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:29.414Z,1509675569.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:29.875Z,1509675569.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:30.219Z,1509675570.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:30.650Z,1509675570.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:31.093Z,1509675571.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:31.450Z,1509675571.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:31.850Z,1509675571.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:32.219Z,1509675572.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:32.611Z,1509675572.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:33.030Z,1509675573.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:33.427Z,1509675573.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:33.823Z,1509675573.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:34.213Z,1509675574.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:34.615Z,1509675574.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:35.011Z,1509675575.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:35.414Z,1509675575.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:35.824Z,1509675575.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:36.223Z,1509675576.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:36.623Z,1509675576.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:37.014Z,1509675577.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:37.411Z,1509675577.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:37.821Z,1509675577.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:38.212Z,1509675578.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:38.611Z,1509675578.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:39.023Z,1509675579.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:39.423Z,1509675579.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:39.820Z,1509675579.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:40.213Z,1509675580.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:40.614Z,1509675580.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:41.070Z,1509675581.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:41.413Z,1509675581.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:41.823Z,1509675581.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:42.231Z,1509675582.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:42.624Z,1509675582.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:43.067Z,1509675583.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:43.412Z,1509675583.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:43.871Z,1509675583.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:44.213Z,1509675584.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:44.611Z,1509675584.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:45.106Z,1509675585.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:45.423Z,1509675585.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:45.855Z,1509675585.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:46.250Z,1509675586.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:46.615Z,1509675586.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:47.013Z,1509675587.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:47.427Z,1509675587.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:47.824Z,1509675587.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:48.224Z,1509675588.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:48.628Z,1509675588.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:49.016Z,1509675589.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:49.418Z,1509675589.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:49.817Z,1509675589.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:50.210Z,1509675590.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:50.612Z,1509675590.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:51.028Z,1509675591.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:51.419Z,1509675591.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:51.820Z,1509675591.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:52.218Z,1509675592.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:52.619Z,1509675592.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:53.014Z,1509675593.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:53.196Z,1509675593.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:19:53.196Z,1509675593.196 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T02:19:53.196Z,1509675593.196 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:19:53.411Z,1509675593.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:19:53.412Z,1509675593.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:53.516Z,1509675593.516 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:19:53.601Z,1509675593.601 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:19:53.697Z,1509675593.697 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:19:53.834Z,1509675593.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:19:53.835Z,1509675593.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:54.221Z,1509675594.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:19:54.222Z,1509675594.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:54.630Z,1509675594.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:19:54.631Z,1509675594.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:55.014Z,1509675595.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:19:55.015Z,1509675595.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:55.101Z,1509675595.101 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:19:55.101Z,1509675595.101 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T02:19:55.312Z,1509675595.312 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:19:55.313Z,1509675595.313 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:19:55.313Z,1509675595.313 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:19:55.313Z,1509675595.313 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:19:55.413Z,1509675595.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:19:55.414Z,1509675595.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:55.818Z,1509675595.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:19:55.819Z,1509675595.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:56.222Z,1509675596.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:19:56.223Z,1509675596.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:56.626Z,1509675596.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:19:56.627Z,1509675596.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:57.022Z,1509675597.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:19:57.023Z,1509675597.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:57.434Z,1509675597.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:19:57.435Z,1509675597.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:57.830Z,1509675597.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:19:57.831Z,1509675597.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:58.291Z,1509675598.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T02:19:58.292Z,1509675598.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:58.619Z,1509675598.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:19:58.620Z,1509675598.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:59.057Z,1509675599.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:19:59.058Z,1509675599.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:59.483Z,1509675599.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T02:19:59.484Z,1509675599.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:19:59.534Z,1509675599.534 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:19:59.619Z,1509675599.619 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:19:59.621Z,1509675599.621 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:19:59.622Z,1509675599.622 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:19:59.622Z,1509675599.622 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:19:59.878Z,1509675599.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T02:19:59.885Z,1509675599.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:00.267Z,1509675600.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:00.625Z,1509675600.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:01.020Z,1509675601.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:01.420Z,1509675601.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:01.815Z,1509675601.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:02.203Z,1509675602.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:02.621Z,1509675602.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:03.097Z,1509675603.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:03.424Z,1509675603.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:03.823Z,1509675603.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:04.204Z,1509675604.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:04.604Z,1509675604.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:05.076Z,1509675605.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:05.417Z,1509675605.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:05.824Z,1509675605.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:06.225Z,1509675606.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:06.627Z,1509675606.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:07.077Z,1509675607.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:07.419Z,1509675607.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:07.813Z,1509675607.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:08.219Z,1509675608.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:08.615Z,1509675608.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:09.093Z,1509675609.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:09.420Z,1509675609.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:09.817Z,1509675609.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:10.218Z,1509675610.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:10.613Z,1509675610.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:11.019Z,1509675611.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:11.422Z,1509675611.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:11.830Z,1509675611.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:12.270Z,1509675612.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:12.679Z,1509675612.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:15.899Z,1509675615.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:16.072Z,1509675616.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:16.481Z,1509675616.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:16.923Z,1509675616.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:17.281Z,1509675617.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:17.722Z,1509675617.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:18.113Z,1509675618.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:18.475Z,1509675618.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:18.884Z,1509675618.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:19.287Z,1509675619.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:19.681Z,1509675619.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:20.071Z,1509675620.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:20.474Z,1509675620.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:20.873Z,1509675620.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:21.271Z,1509675621.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:21.670Z,1509675621.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:22.083Z,1509675622.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:22.485Z,1509675622.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:22.881Z,1509675622.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:23.271Z,1509675623.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:23.679Z,1509675623.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:24.079Z,1509675624.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:24.468Z,1509675624.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:24.880Z,1509675624.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:25.288Z,1509675625.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:25.683Z,1509675625.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:26.068Z,1509675626.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:26.468Z,1509675626.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:26.883Z,1509675626.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:27.339Z,1509675627.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:27.668Z,1509675627.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:28.079Z,1509675628.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:28.486Z,1509675628.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:28.884Z,1509675628.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:29.261Z,1509675629.261 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T02:20:29.261Z,1509675629.261 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:20:29.262Z,1509675629.262 [BPC1](ERROR): Data Fault
2017-11-03T02:20:29.270Z,1509675629.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:29.349Z,1509675629.349 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:20:29.688Z,1509675629.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:30.073Z,1509675630.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:30.472Z,1509675630.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:30.564Z,1509675630.564 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:20:30.564Z,1509675630.564 [BPC1] No Fault, FailCount= 1
2017-11-03T02:20:30.939Z,1509675630.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:31.278Z,1509675631.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:31.723Z,1509675631.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:32.074Z,1509675632.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:32.475Z,1509675632.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:32.873Z,1509675632.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:33.278Z,1509675633.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:33.673Z,1509675633.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:34.079Z,1509675634.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:34.486Z,1509675634.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:34.882Z,1509675634.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:35.270Z,1509675635.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:35.673Z,1509675635.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:36.071Z,1509675636.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:36.475Z,1509675636.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:36.881Z,1509675636.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:37.288Z,1509675637.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:37.680Z,1509675637.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:38.078Z,1509675638.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:38.478Z,1509675638.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:38.872Z,1509675638.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:39.273Z,1509675639.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:39.679Z,1509675639.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:40.087Z,1509675640.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:40.484Z,1509675640.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:40.880Z,1509675640.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:41.333Z,1509675641.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:41.673Z,1509675641.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:42.101Z,1509675642.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:42.479Z,1509675642.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:42.882Z,1509675642.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:43.287Z,1509675643.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:43.733Z,1509675643.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:44.091Z,1509675644.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:44.476Z,1509675644.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:44.914Z,1509675644.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:45.276Z,1509675645.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:45.717Z,1509675645.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:46.122Z,1509675646.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:46.484Z,1509675646.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:46.881Z,1509675646.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:47.276Z,1509675647.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:47.677Z,1509675647.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:48.083Z,1509675648.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:48.478Z,1509675648.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:48.885Z,1509675648.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:49.299Z,1509675649.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:49.684Z,1509675649.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:50.078Z,1509675650.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:50.476Z,1509675650.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:50.871Z,1509675650.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:51.271Z,1509675651.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:51.668Z,1509675651.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:52.079Z,1509675652.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:52.478Z,1509675652.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:52.876Z,1509675652.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:53.271Z,1509675653.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:53.670Z,1509675653.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:54.075Z,1509675654.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:54.471Z,1509675654.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:54.885Z,1509675654.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:55.340Z,1509675655.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:55.692Z,1509675655.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:56.125Z,1509675656.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:56.496Z,1509675656.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:56.891Z,1509675656.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:57.287Z,1509675657.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:57.701Z,1509675657.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:58.195Z,1509675658.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:58.496Z,1509675658.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:58.943Z,1509675658.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:59.310Z,1509675659.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:20:59.710Z,1509675659.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:00.099Z,1509675660.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:00.519Z,1509675660.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:00.905Z,1509675660.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:01.303Z,1509675661.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:01.712Z,1509675661.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:02.138Z,1509675662.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:02.516Z,1509675662.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:02.903Z,1509675662.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:03.301Z,1509675663.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:03.701Z,1509675663.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:04.110Z,1509675664.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:04.502Z,1509675664.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:04.906Z,1509675664.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:05.276Z,1509675665.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:05.720Z,1509675665.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:06.071Z,1509675666.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:06.466Z,1509675666.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:06.879Z,1509675666.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:07.279Z,1509675667.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:07.679Z,1509675667.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:08.068Z,1509675668.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:08.474Z,1509675668.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:08.871Z,1509675668.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:09.362Z,1509675669.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:09.667Z,1509675669.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:10.078Z,1509675670.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:10.476Z,1509675670.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:10.879Z,1509675670.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:11.270Z,1509675671.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:11.680Z,1509675671.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:12.122Z,1509675672.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:12.521Z,1509675672.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:12.884Z,1509675672.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:16.179Z,1509675676.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:16.355Z,1509675676.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:16.759Z,1509675676.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:17.167Z,1509675677.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:17.518Z,1509675677.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:17.932Z,1509675677.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:18.330Z,1509675678.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:18.728Z,1509675678.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:19.143Z,1509675679.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:19.520Z,1509675679.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:19.917Z,1509675679.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:20.322Z,1509675680.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:20.725Z,1509675680.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:21.210Z,1509675681.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:21.533Z,1509675681.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:21.921Z,1509675681.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:22.316Z,1509675682.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:22.730Z,1509675682.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:23.131Z,1509675683.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:23.531Z,1509675683.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:23.920Z,1509675683.920 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:23.920Z,1509675683.920 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2017-11-03T02:21:23.920Z,1509675683.920 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:21:23.922Z,1509675683.922 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:23.922Z,1509675683.922 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2017-11-03T02:21:23.922Z,1509675683.922 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:21:23.924Z,1509675683.924 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:23.924Z,1509675683.924 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2017-11-03T02:21:23.924Z,1509675683.924 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:21:24.001Z,1509675684.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:21:24.001Z,1509675684.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:21:24.001Z,1509675684.001 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:21:24.405Z,1509675684.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:21:24.405Z,1509675684.405 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2017-11-03T02:21:24.405Z,1509675684.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:21:24.405Z,1509675684.405 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2017-11-03T02:21:24.406Z,1509675684.406 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:21:24.406Z,1509675684.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2017-11-03T02:21:24.726Z,1509675684.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:21:24.727Z,1509675684.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:21:24.727Z,1509675684.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:21:24.728Z,1509675684.728 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:21:24.728Z,1509675684.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:21:24.729Z,1509675684.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:21:24.729Z,1509675684.729 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:21:24.729Z,1509675684.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:21:24.730Z,1509675684.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:21:25.135Z,1509675685.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:25.531Z,1509675685.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:25.912Z,1509675685.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:26.311Z,1509675686.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:26.738Z,1509675686.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:27.136Z,1509675687.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:27.589Z,1509675687.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:27.911Z,1509675687.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:28.319Z,1509675688.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:28.741Z,1509675688.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:29.214Z,1509675689.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:29.520Z,1509675689.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:29.923Z,1509675689.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:30.347Z,1509675690.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:30.720Z,1509675690.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:31.175Z,1509675691.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:31.551Z,1509675691.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:31.919Z,1509675691.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:32.323Z,1509675692.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:32.726Z,1509675692.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:33.157Z,1509675693.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:33.529Z,1509675693.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:33.918Z,1509675693.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:34.317Z,1509675694.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:34.734Z,1509675694.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:35.177Z,1509675695.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:35.528Z,1509675695.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:35.917Z,1509675695.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:36.337Z,1509675696.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:36.727Z,1509675696.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:37.127Z,1509675697.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:37.524Z,1509675697.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:37.915Z,1509675697.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:38.319Z,1509675698.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:38.735Z,1509675698.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:39.131Z,1509675699.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:39.527Z,1509675699.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:39.921Z,1509675699.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:40.327Z,1509675700.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:40.729Z,1509675700.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:41.131Z,1509675701.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:41.528Z,1509675701.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:41.929Z,1509675701.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:42.303Z,1509675702.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:42.735Z,1509675702.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:42.826Z,1509675702.826 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T02:21:43.138Z,1509675703.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:43.594Z,1509675703.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:43.908Z,1509675703.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:44.343Z,1509675704.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:44.735Z,1509675704.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:45.178Z,1509675705.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:45.575Z,1509675705.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:45.924Z,1509675705.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:46.321Z,1509675706.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:46.736Z,1509675706.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:47.145Z,1509675707.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:47.532Z,1509675707.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:47.915Z,1509675707.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:48.315Z,1509675708.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:48.735Z,1509675708.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:49.194Z,1509675709.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:49.534Z,1509675709.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:49.911Z,1509675709.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:50.307Z,1509675710.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:50.734Z,1509675710.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:51.154Z,1509675711.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:51.529Z,1509675711.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:51.917Z,1509675711.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:52.322Z,1509675712.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:52.735Z,1509675712.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:53.128Z,1509675713.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:53.529Z,1509675713.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:53.930Z,1509675713.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:54.307Z,1509675714.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:54.735Z,1509675714.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:55.139Z,1509675715.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:55.535Z,1509675715.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:55.643Z,1509675715.643 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:21:55.644Z,1509675715.644 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T02:21:55.644Z,1509675715.644 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:21:55.677Z,1509675715.677 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:21:55.923Z,1509675715.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:21:55.924Z,1509675715.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:56.048Z,1509675716.048 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:21:56.138Z,1509675716.138 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:21:56.323Z,1509675716.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:21:56.324Z,1509675716.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:56.724Z,1509675716.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:21:56.725Z,1509675716.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:57.125Z,1509675717.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:21:57.126Z,1509675717.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:57.567Z,1509675717.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:21:57.568Z,1509675717.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:57.661Z,1509675717.661 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:21:57.661Z,1509675717.661 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T02:21:57.752Z,1509675717.752 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:21:57.753Z,1509675717.753 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:21:57.753Z,1509675717.753 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:21:57.753Z,1509675717.753 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:21:57.945Z,1509675717.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:21:57.946Z,1509675717.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:58.315Z,1509675718.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:21:58.316Z,1509675718.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:58.728Z,1509675718.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:21:58.729Z,1509675718.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:59.162Z,1509675719.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:21:59.163Z,1509675719.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:59.527Z,1509675719.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:21:59.528Z,1509675719.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:21:59.955Z,1509675719.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:21:59.956Z,1509675719.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:00.358Z,1509675720.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:22:00.359Z,1509675720.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:00.728Z,1509675720.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:22:00.729Z,1509675720.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:01.134Z,1509675721.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:22:01.135Z,1509675721.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:01.527Z,1509675721.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:22:01.528Z,1509675721.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:01.931Z,1509675721.931 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:22:01.982Z,1509675721.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:22:01.983Z,1509675721.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:02.059Z,1509675722.059 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:22:02.061Z,1509675722.061 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:22:02.061Z,1509675722.061 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:22:02.062Z,1509675722.062 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:22:02.320Z,1509675722.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:22:02.321Z,1509675722.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:02.728Z,1509675722.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:03.127Z,1509675723.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:03.527Z,1509675723.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:03.923Z,1509675723.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:04.331Z,1509675724.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:04.732Z,1509675724.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:05.132Z,1509675725.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:05.528Z,1509675725.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:05.920Z,1509675725.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:06.327Z,1509675726.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:06.732Z,1509675726.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:07.138Z,1509675727.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:07.530Z,1509675727.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:07.917Z,1509675727.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:08.320Z,1509675728.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:08.735Z,1509675728.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:09.139Z,1509675729.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:09.534Z,1509675729.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:09.918Z,1509675729.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:10.327Z,1509675730.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:10.732Z,1509675730.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:11.135Z,1509675731.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:11.539Z,1509675731.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:11.907Z,1509675731.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:12.370Z,1509675732.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:12.733Z,1509675732.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:13.135Z,1509675733.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:16.433Z,1509675736.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:16.594Z,1509675736.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:17.030Z,1509675737.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:17.429Z,1509675737.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:17.803Z,1509675737.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:18.204Z,1509675738.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:18.607Z,1509675738.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:18.990Z,1509675738.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:19.391Z,1509675739.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:19.792Z,1509675739.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:20.197Z,1509675740.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:20.594Z,1509675740.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:21.007Z,1509675741.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:21.401Z,1509675741.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:21.797Z,1509675741.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:22.191Z,1509675742.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:22.597Z,1509675742.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:22.992Z,1509675742.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:23.388Z,1509675743.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:23.807Z,1509675743.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:24.204Z,1509675744.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:24.663Z,1509675744.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:24.997Z,1509675744.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:25.398Z,1509675745.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:25.803Z,1509675745.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:26.197Z,1509675746.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:26.662Z,1509675746.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:27.001Z,1509675747.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:27.407Z,1509675747.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:27.810Z,1509675747.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:28.199Z,1509675748.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:28.579Z,1509675748.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:28.980Z,1509675748.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:29.422Z,1509675749.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:29.831Z,1509675749.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:30.215Z,1509675750.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:30.627Z,1509675750.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:30.983Z,1509675750.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:31.419Z,1509675751.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:31.783Z,1509675751.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:32.239Z,1509675752.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:32.565Z,1509675752.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:32.579Z,1509675752.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:32.982Z,1509675752.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:33.005Z,1509675753.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:33.381Z,1509675753.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:33.406Z,1509675753.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:33.784Z,1509675753.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:33.808Z,1509675753.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:34.172Z,1509675754.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:34.187Z,1509675754.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:34.568Z,1509675754.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:34.583Z,1509675754.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:34.971Z,1509675754.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:34.986Z,1509675754.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:35.369Z,1509675755.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:35.384Z,1509675755.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:35.781Z,1509675755.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:35.806Z,1509675755.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:36.185Z,1509675756.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:36.215Z,1509675756.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:36.589Z,1509675756.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:36.614Z,1509675756.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:36.972Z,1509675756.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:36.987Z,1509675756.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:37.372Z,1509675757.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:37.386Z,1509675757.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:37.771Z,1509675757.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:37.787Z,1509675757.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:38.172Z,1509675758.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:38.187Z,1509675758.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:38.625Z,1509675758.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:38.673Z,1509675758.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:38.978Z,1509675758.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:38.993Z,1509675758.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:39.381Z,1509675759.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:39.396Z,1509675759.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:39.777Z,1509675759.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:39.798Z,1509675759.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:40.172Z,1509675760.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:40.187Z,1509675760.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:40.614Z,1509675760.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:40.656Z,1509675760.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:40.974Z,1509675760.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:40.990Z,1509675760.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:41.375Z,1509675761.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:41.395Z,1509675761.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:41.785Z,1509675761.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:41.800Z,1509675761.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:42.185Z,1509675762.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:42.199Z,1509675762.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:42.584Z,1509675762.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:42.599Z,1509675762.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:42.972Z,1509675762.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:42.991Z,1509675762.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:43.371Z,1509675763.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:43.386Z,1509675763.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:43.772Z,1509675763.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:43.843Z,1509675763.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:44.163Z,1509675764.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:44.215Z,1509675764.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:44.564Z,1509675764.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:44.591Z,1509675764.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:45.010Z,1509675765.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:45.059Z,1509675765.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:45.389Z,1509675765.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:45.403Z,1509675765.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:45.781Z,1509675765.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:45.819Z,1509675765.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:46.163Z,1509675766.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:46.219Z,1509675766.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:46.564Z,1509675766.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:46.590Z,1509675766.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:46.966Z,1509675766.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:46.992Z,1509675766.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:47.364Z,1509675767.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:47.390Z,1509675767.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:47.784Z,1509675767.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:47.799Z,1509675767.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:48.215Z,1509675768.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:48.600Z,1509675768.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:48.988Z,1509675768.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:49.367Z,1509675769.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:49.395Z,1509675769.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:49.764Z,1509675769.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:49.790Z,1509675769.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:50.165Z,1509675770.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:22:50.191Z,1509675770.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:50.600Z,1509675770.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:51.000Z,1509675771.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:51.400Z,1509675771.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:51.802Z,1509675771.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:52.192Z,1509675772.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:52.651Z,1509675772.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:52.992Z,1509675772.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:53.392Z,1509675773.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:53.802Z,1509675773.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:54.210Z,1509675774.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:54.690Z,1509675774.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:54.999Z,1509675774.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:55.399Z,1509675775.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:55.799Z,1509675775.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:56.195Z,1509675776.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:56.593Z,1509675776.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:57.001Z,1509675777.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:57.404Z,1509675777.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:57.807Z,1509675777.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:58.250Z,1509675778.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:58.615Z,1509675778.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:58.991Z,1509675778.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:59.395Z,1509675779.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:22:59.871Z,1509675779.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:00.211Z,1509675780.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:00.640Z,1509675780.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:01.034Z,1509675781.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:01.393Z,1509675781.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:01.795Z,1509675781.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:02.196Z,1509675782.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:02.596Z,1509675782.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:03.001Z,1509675783.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:03.401Z,1509675783.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:03.799Z,1509675783.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:04.196Z,1509675784.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:04.607Z,1509675784.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:04.998Z,1509675784.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:05.380Z,1509675785.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:05.819Z,1509675785.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:06.207Z,1509675786.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:06.663Z,1509675786.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:06.990Z,1509675786.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:07.378Z,1509675787.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:07.799Z,1509675787.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:08.180Z,1509675788.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:08.661Z,1509675788.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:09.003Z,1509675789.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:09.411Z,1509675789.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:09.810Z,1509675789.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:10.183Z,1509675790.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:10.606Z,1509675790.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:10.981Z,1509675790.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:11.379Z,1509675791.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:11.747Z,1509675791.747 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T02:23:11.748Z,1509675791.748 [NAL9602] Data Fault, FailCount= 2
2017-11-03T02:23:11.748Z,1509675791.748 [NAL9602](ERROR): Data Fault
2017-11-03T02:23:11.780Z,1509675791.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:11.896Z,1509675791.896 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T02:23:12.151Z,1509675792.151 [NAL9602](INFO): Powering down
2017-11-03T02:23:12.184Z,1509675792.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:12.608Z,1509675792.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:13.026Z,1509675793.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:13.113Z,1509675793.113 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T02:23:13.113Z,1509675793.113 [NAL9602] No Fault, FailCount= 2
2017-11-03T02:23:13.381Z,1509675793.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:16.634Z,1509675796.634 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:23:16.635Z,1509675796.635 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:23:16.635Z,1509675796.635 [BPC1](ERROR): Communications Fault
2017-11-03T02:23:16.667Z,1509675796.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:16.757Z,1509675796.757 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:23:16.839Z,1509675796.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:17.226Z,1509675797.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:17.631Z,1509675797.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:17.713Z,1509675797.713 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:23:17.713Z,1509675797.713 [BPC1] No Fault, FailCount= 1
2017-11-03T02:23:18.087Z,1509675798.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:18.419Z,1509675798.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:18.825Z,1509675798.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:19.222Z,1509675799.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:19.627Z,1509675799.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:20.038Z,1509675800.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:20.421Z,1509675800.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:20.829Z,1509675800.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:21.237Z,1509675801.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:21.627Z,1509675801.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:22.024Z,1509675802.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:22.462Z,1509675802.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:22.844Z,1509675802.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:23.219Z,1509675803.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:23.625Z,1509675803.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:24.071Z,1509675804.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:24.444Z,1509675804.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:24.819Z,1509675804.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:25.232Z,1509675805.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:25.625Z,1509675805.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:26.093Z,1509675806.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:26.434Z,1509675806.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:26.831Z,1509675806.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:27.201Z,1509675807.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:27.626Z,1509675807.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:28.005Z,1509675808.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:28.414Z,1509675808.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:28.822Z,1509675808.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:29.227Z,1509675809.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:29.623Z,1509675809.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:30.020Z,1509675810.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:30.418Z,1509675810.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:30.817Z,1509675810.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:31.215Z,1509675811.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:31.624Z,1509675811.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:32.021Z,1509675812.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:32.413Z,1509675812.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:32.862Z,1509675812.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:33.221Z,1509675813.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:33.619Z,1509675813.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:34.014Z,1509675814.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:34.417Z,1509675814.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:34.863Z,1509675814.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:35.219Z,1509675815.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:35.651Z,1509675815.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:36.051Z,1509675816.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:36.410Z,1509675816.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:36.826Z,1509675816.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:37.245Z,1509675817.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:37.610Z,1509675817.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:38.071Z,1509675818.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:38.444Z,1509675818.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:38.849Z,1509675818.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:39.210Z,1509675819.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:39.626Z,1509675819.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:40.074Z,1509675820.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:40.451Z,1509675820.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:40.823Z,1509675820.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:41.212Z,1509675821.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:41.617Z,1509675821.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:42.081Z,1509675822.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:42.371Z,1509675822.371 [NAL9602](INFO): Powering up NAL9602
2017-11-03T02:23:42.422Z,1509675822.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:42.826Z,1509675822.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:43.221Z,1509675823.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:43.622Z,1509675823.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:44.023Z,1509675824.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:44.430Z,1509675824.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:44.822Z,1509675824.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:45.237Z,1509675825.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:45.623Z,1509675825.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:46.028Z,1509675826.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:46.420Z,1509675826.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:46.846Z,1509675826.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:47.219Z,1509675827.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:47.626Z,1509675827.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:48.023Z,1509675828.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:48.450Z,1509675828.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:48.801Z,1509675828.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:49.243Z,1509675829.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:49.632Z,1509675829.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:50.048Z,1509675830.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:50.447Z,1509675830.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:50.833Z,1509675830.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:51.234Z,1509675831.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:51.608Z,1509675831.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:52.086Z,1509675832.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:52.442Z,1509675832.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:52.832Z,1509675832.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:53.176Z,1509675833.176 [NAL9602](INFO): NAL9602 initialized
2017-11-03T02:23:53.245Z,1509675833.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:53.604Z,1509675833.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:54.087Z,1509675834.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:54.436Z,1509675834.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:54.845Z,1509675834.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:55.208Z,1509675835.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:55.607Z,1509675835.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:56.038Z,1509675836.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:56.411Z,1509675836.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:56.812Z,1509675836.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:57.238Z,1509675837.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:57.638Z,1509675837.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:58.046Z,1509675838.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:58.453Z,1509675838.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:58.824Z,1509675838.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:59.224Z,1509675839.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:23:59.649Z,1509675839.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:00.026Z,1509675840.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:00.450Z,1509675840.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:00.820Z,1509675840.820 [BPC1](ERROR): Failed to parse message.
2017-11-03T02:24:00.820Z,1509675840.820 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:24:00.820Z,1509675840.820 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:24:00.820Z,1509675840.820 [BPC1](ERROR): Data Fault
2017-11-03T02:24:00.829Z,1509675840.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:00.933Z,1509675840.933 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:24:01.251Z,1509675841.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:01.623Z,1509675841.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:02.011Z,1509675842.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:02.093Z,1509675842.093 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:24:02.093Z,1509675842.093 [BPC1] No Fault, FailCount= 1
2017-11-03T02:24:02.479Z,1509675842.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:02.826Z,1509675842.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:03.235Z,1509675843.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:03.655Z,1509675843.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:04.035Z,1509675844.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:04.431Z,1509675844.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:04.817Z,1509675844.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:05.227Z,1509675845.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:05.622Z,1509675845.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:06.107Z,1509675846.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:06.453Z,1509675846.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:06.831Z,1509675846.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:07.223Z,1509675847.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:07.637Z,1509675847.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:08.094Z,1509675848.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:08.435Z,1509675848.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:08.828Z,1509675848.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:09.256Z,1509675849.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:09.636Z,1509675849.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:10.113Z,1509675850.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:10.423Z,1509675850.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:10.837Z,1509675850.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:11.221Z,1509675851.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:11.626Z,1509675851.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:12.035Z,1509675852.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:12.469Z,1509675852.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:12.472Z,1509675852.472 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T02:19:12.3Z
2017-11-03T02:24:12.472Z,1509675852.472 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T02:24:12.473Z,1509675852.473 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T02:24:12.834Z,1509675852.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:13.325Z,1509675853.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:13.631Z,1509675853.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:16.966Z,1509675856.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:17.085Z,1509675857.085 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0052.lzma
2017-11-03T02:24:17.155Z,1509675857.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:17.547Z,1509675857.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:17.887Z,1509675857.887 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0052.lzma.bak
2017-11-03T02:24:17.887Z,1509675857.887 [DataOverHttps](INFO): SBD MOMSN=5182479
2017-11-03T02:24:17.987Z,1509675857.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:18.633Z,1509675858.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:18.822Z,1509675858.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:22.126Z,1509675862.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:22.277Z,1509675862.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:22.684Z,1509675862.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:23.084Z,1509675863.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:23.488Z,1509675863.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:23.876Z,1509675863.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:27.076Z,1509675867.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:27.076Z,1509675867.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2017-11-03T02:24:27.076Z,1509675867.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:24:27.078Z,1509675867.078 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:27.078Z,1509675867.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2017-11-03T02:24:27.078Z,1509675867.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:24:27.080Z,1509675867.080 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:27.080Z,1509675867.080 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2017-11-03T02:24:27.080Z,1509675867.080 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:24:27.184Z,1509675867.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:24:27.184Z,1509675867.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:24:27.185Z,1509675867.185 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:24:27.200Z,1509675867.200 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20171103T001125/Express0053.lzma
2017-11-03T02:24:27.365Z,1509675867.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:24:27.365Z,1509675867.365 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2017-11-03T02:24:27.365Z,1509675867.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:24:27.365Z,1509675867.365 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2017-11-03T02:24:27.366Z,1509675867.366 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:24:27.366Z,1509675867.366 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2017-11-03T02:24:27.660Z,1509675867.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:24:27.661Z,1509675867.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:24:27.661Z,1509675867.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:24:27.661Z,1509675867.661 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:24:27.662Z,1509675867.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:24:27.662Z,1509675867.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:24:27.662Z,1509675867.662 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:24:27.663Z,1509675867.663 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:24:27.663Z,1509675867.663 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:24:27.999Z,1509675867.999 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0053.lzma.bak
2017-11-03T02:24:27.999Z,1509675867.999 [DataOverHttps](INFO): SBD MOMSN=5182481
2017-11-03T02:24:28.070Z,1509675868.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:28.654Z,1509675868.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:28.657Z,1509675868.657 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T02:24:28.657Z,1509675868.657 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T02:24:28.657Z,1509675868.657 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T02:24:28.848Z,1509675868.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:32.069Z,1509675872.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:32.226Z,1509675872.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:32.677Z,1509675872.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:33.062Z,1509675873.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:33.416Z,1509675873.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:33.814Z,1509675873.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:34.251Z,1509675874.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:34.608Z,1509675874.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:35.015Z,1509675875.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:35.454Z,1509675875.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:35.816Z,1509675875.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:36.250Z,1509675876.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:36.648Z,1509675876.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:37.004Z,1509675877.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:37.410Z,1509675877.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:37.893Z,1509675877.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:38.219Z,1509675878.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:38.619Z,1509675878.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:39.023Z,1509675879.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:39.404Z,1509675879.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:39.809Z,1509675879.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:40.219Z,1509675880.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:40.619Z,1509675880.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:41.020Z,1509675881.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:41.421Z,1509675881.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:41.819Z,1509675881.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:42.215Z,1509675882.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:42.607Z,1509675882.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:43.007Z,1509675883.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:43.427Z,1509675883.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:43.804Z,1509675883.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:44.225Z,1509675884.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:44.652Z,1509675884.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:45.026Z,1509675885.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:45.404Z,1509675885.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:45.805Z,1509675885.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:46.205Z,1509675886.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:46.653Z,1509675886.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:47.025Z,1509675887.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:47.451Z,1509675887.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:47.831Z,1509675887.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:48.227Z,1509675888.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:48.606Z,1509675888.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:49.046Z,1509675889.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:49.405Z,1509675889.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:49.856Z,1509675889.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:50.233Z,1509675890.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:50.658Z,1509675890.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:51.058Z,1509675891.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:51.404Z,1509675891.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:51.803Z,1509675891.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:52.209Z,1509675892.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:52.611Z,1509675892.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:53.038Z,1509675893.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:53.429Z,1509675893.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:53.835Z,1509675893.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:54.238Z,1509675894.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:54.602Z,1509675894.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:55.037Z,1509675895.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:55.404Z,1509675895.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:55.802Z,1509675895.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:56.232Z,1509675896.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:56.631Z,1509675896.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:57.023Z,1509675897.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:57.417Z,1509675897.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:57.815Z,1509675897.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:58.213Z,1509675898.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:58.659Z,1509675898.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:59.020Z,1509675899.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:59.424Z,1509675899.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:24:59.820Z,1509675899.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:00.212Z,1509675900.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:00.667Z,1509675900.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:01.010Z,1509675901.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:01.435Z,1509675901.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:01.813Z,1509675901.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:02.237Z,1509675902.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:02.625Z,1509675902.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:03.025Z,1509675903.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:03.439Z,1509675903.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:03.815Z,1509675903.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:04.239Z,1509675904.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:04.599Z,1509675904.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:05.128Z,1509675905.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:05.422Z,1509675905.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:05.868Z,1509675905.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:06.231Z,1509675906.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:06.619Z,1509675906.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:06.999Z,1509675906.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:07.415Z,1509675907.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:07.822Z,1509675907.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:08.243Z,1509675908.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:08.651Z,1509675908.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:09.021Z,1509675909.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:09.411Z,1509675909.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:09.818Z,1509675909.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:10.217Z,1509675910.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:10.619Z,1509675910.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:11.012Z,1509675911.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:11.410Z,1509675911.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:11.812Z,1509675911.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:12.211Z,1509675912.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:12.658Z,1509675912.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:13.007Z,1509675913.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:13.408Z,1509675913.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:13.865Z,1509675913.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:14.219Z,1509675914.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:14.660Z,1509675914.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:15.016Z,1509675915.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:15.407Z,1509675915.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:15.815Z,1509675915.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:16.251Z,1509675916.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:16.611Z,1509675916.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:17.012Z,1509675917.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:17.411Z,1509675917.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:17.862Z,1509675917.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:18.219Z,1509675918.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:18.639Z,1509675918.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:19.011Z,1509675919.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:19.446Z,1509675919.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:19.839Z,1509675919.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:20.241Z,1509675920.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:20.640Z,1509675920.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:21.015Z,1509675921.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:21.407Z,1509675921.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:21.815Z,1509675921.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:22.207Z,1509675922.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:22.607Z,1509675922.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:23.012Z,1509675923.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:23.411Z,1509675923.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:23.823Z,1509675923.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:24.209Z,1509675924.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:24.335Z,1509675924.335 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:25:24.336Z,1509675924.336 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T02:25:24.336Z,1509675924.336 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:25:24.614Z,1509675924.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:25:24.615Z,1509675924.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:24.689Z,1509675924.689 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:25:24.741Z,1509675924.741 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:25:24.833Z,1509675924.833 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:25:25.018Z,1509675925.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:25:25.019Z,1509675925.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:25.409Z,1509675925.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:25:25.410Z,1509675925.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:25.810Z,1509675925.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:25:25.811Z,1509675925.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:26.220Z,1509675926.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:25:26.221Z,1509675926.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:26.317Z,1509675926.317 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:25:26.317Z,1509675926.317 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T02:25:26.449Z,1509675926.449 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:25:26.450Z,1509675926.450 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:25:26.450Z,1509675926.450 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:25:26.450Z,1509675926.450 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:25:26.627Z,1509675926.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:25:26.628Z,1509675926.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:27.026Z,1509675927.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:25:27.027Z,1509675927.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:27.409Z,1509675927.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:25:27.410Z,1509675927.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:27.808Z,1509675927.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:25:27.809Z,1509675927.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:28.212Z,1509675928.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:25:28.213Z,1509675928.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:28.607Z,1509675928.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:25:28.608Z,1509675928.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:29.026Z,1509675929.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:25:29.027Z,1509675929.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:29.421Z,1509675929.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:25:29.422Z,1509675929.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:30.626Z,1509675930.626 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:25:30.716Z,1509675930.716 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:25:30.717Z,1509675930.717 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:25:30.718Z,1509675930.718 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:25:30.718Z,1509675930.718 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:25:32.943Z,1509675932.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:33.101Z,1509675933.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:33.500Z,1509675933.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:33.919Z,1509675933.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:34.299Z,1509675934.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:34.739Z,1509675934.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:35.151Z,1509675935.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:35.511Z,1509675935.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:35.915Z,1509675935.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:36.301Z,1509675936.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:36.702Z,1509675936.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:37.101Z,1509675937.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:37.503Z,1509675937.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:37.905Z,1509675937.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:38.310Z,1509675938.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:38.713Z,1509675938.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:39.114Z,1509675939.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:39.483Z,1509675939.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:39.884Z,1509675939.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:40.308Z,1509675940.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:40.684Z,1509675940.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:41.113Z,1509675941.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:41.521Z,1509675941.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:41.920Z,1509675941.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:42.306Z,1509675942.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:42.687Z,1509675942.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:43.121Z,1509675943.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:43.492Z,1509675943.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:43.890Z,1509675943.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:44.311Z,1509675944.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:44.709Z,1509675944.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:45.134Z,1509675945.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:45.490Z,1509675945.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:45.887Z,1509675945.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:46.292Z,1509675946.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:46.690Z,1509675946.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:47.143Z,1509675947.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:47.513Z,1509675947.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:47.913Z,1509675947.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:48.288Z,1509675948.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:48.691Z,1509675948.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:49.165Z,1509675949.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:49.499Z,1509675949.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:49.904Z,1509675949.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:50.299Z,1509675950.299 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:25:50.299Z,1509675950.299 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:25:50.299Z,1509675950.299 [BPC1](ERROR): Communications Fault
2017-11-03T02:25:50.307Z,1509675950.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:50.385Z,1509675950.385 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:25:50.715Z,1509675950.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:51.111Z,1509675951.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:51.511Z,1509675951.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:51.604Z,1509675951.604 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:25:51.604Z,1509675951.604 [BPC1] No Fault, FailCount= 1
2017-11-03T02:25:51.955Z,1509675951.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:52.287Z,1509675952.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:52.688Z,1509675952.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:53.155Z,1509675953.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:53.510Z,1509675953.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:53.916Z,1509675953.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:54.295Z,1509675954.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:54.690Z,1509675954.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:55.086Z,1509675955.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:55.519Z,1509675955.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:55.910Z,1509675955.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:56.309Z,1509675956.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:56.727Z,1509675956.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:57.123Z,1509675957.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:57.541Z,1509675957.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:57.915Z,1509675957.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:58.331Z,1509675958.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:58.718Z,1509675958.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:59.157Z,1509675959.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:59.515Z,1509675959.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:25:59.911Z,1509675959.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:00.332Z,1509675960.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:00.721Z,1509675960.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:01.163Z,1509675961.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:01.525Z,1509675961.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:01.891Z,1509675961.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:02.314Z,1509675962.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:02.733Z,1509675962.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:03.221Z,1509675963.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:03.534Z,1509675963.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:03.971Z,1509675963.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:04.322Z,1509675964.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:04.705Z,1509675964.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:05.103Z,1509675965.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:05.551Z,1509675965.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:05.914Z,1509675965.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:06.345Z,1509675966.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:06.712Z,1509675966.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:07.146Z,1509675967.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:07.584Z,1509675967.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:07.896Z,1509675967.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:08.309Z,1509675968.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:08.708Z,1509675968.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:09.107Z,1509675969.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:09.493Z,1509675969.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:09.901Z,1509675969.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:10.303Z,1509675970.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:10.722Z,1509675970.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:11.117Z,1509675971.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:11.509Z,1509675971.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:11.909Z,1509675971.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:12.303Z,1509675972.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:12.705Z,1509675972.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:13.131Z,1509675973.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:13.505Z,1509675973.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:13.908Z,1509675973.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:14.322Z,1509675974.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:14.709Z,1509675974.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:15.129Z,1509675975.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:15.509Z,1509675975.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:15.909Z,1509675975.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:16.309Z,1509675976.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:16.705Z,1509675976.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:17.154Z,1509675977.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:17.519Z,1509675977.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:17.926Z,1509675977.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:18.310Z,1509675978.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:18.727Z,1509675978.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:19.087Z,1509675979.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:19.491Z,1509675979.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:19.930Z,1509675979.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:20.318Z,1509675980.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:20.707Z,1509675980.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:21.131Z,1509675981.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:21.490Z,1509675981.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:21.919Z,1509675981.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:22.319Z,1509675982.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:22.695Z,1509675982.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:23.100Z,1509675983.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:23.504Z,1509675983.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:23.900Z,1509675983.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:24.295Z,1509675984.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:24.688Z,1509675984.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:25.091Z,1509675985.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:25.491Z,1509675985.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:25.936Z,1509675985.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:26.297Z,1509675986.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:26.697Z,1509675986.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:27.100Z,1509675987.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:27.489Z,1509675987.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:27.891Z,1509675987.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:28.288Z,1509675988.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:28.690Z,1509675988.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:29.111Z,1509675989.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:29.505Z,1509675989.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:33.911Z,1509675993.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:34.072Z,1509675994.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:34.459Z,1509675994.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:34.900Z,1509675994.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:35.253Z,1509675995.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:35.690Z,1509675995.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:36.091Z,1509675996.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:36.479Z,1509675996.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:36.887Z,1509675996.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:37.290Z,1509675997.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:37.674Z,1509675997.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:38.057Z,1509675998.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:38.451Z,1509675998.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:38.879Z,1509675998.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:39.287Z,1509675999.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:39.682Z,1509675999.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:40.077Z,1509676000.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:40.478Z,1509676000.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:40.856Z,1509676000.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:41.278Z,1509676001.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:41.654Z,1509676001.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:42.053Z,1509676002.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:26:42.079Z,1509676002.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:42.454Z,1509676002.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:26:42.483Z,1509676002.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:42.856Z,1509676002.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:26:42.880Z,1509676002.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:43.234Z,1509676003.234 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T02:26:43.234Z,1509676003.234 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T02:26:43.234Z,1509676003.234 [DropWeight](ERROR): Hardware Fault
2017-11-03T02:26:43.295Z,1509676003.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:43.387Z,1509676003.387 [CBIT](INFO): Critical error at 20171103T022643
2017-11-03T02:26:43.389Z,1509676003.389 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T02:26:43.389Z,1509676003.389 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T02:26:43.660Z,1509676003.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:43.751Z,1509676003.751 [CBIT](INFO): Critical error at 20171103T022643
2017-11-03T02:26:44.059Z,1509676004.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:44.461Z,1509676004.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:44.862Z,1509676004.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:45.291Z,1509676005.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:45.665Z,1509676005.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:46.086Z,1509676006.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:46.461Z,1509676006.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:46.859Z,1509676006.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:47.346Z,1509676007.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:47.660Z,1509676007.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:48.099Z,1509676008.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:48.468Z,1509676008.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:48.914Z,1509676008.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:49.262Z,1509676009.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:49.673Z,1509676009.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:50.098Z,1509676010.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:50.467Z,1509676010.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:50.898Z,1509676010.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:51.299Z,1509676011.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:51.675Z,1509676011.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:52.064Z,1509676012.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:52.464Z,1509676012.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:52.894Z,1509676012.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:53.263Z,1509676013.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:53.658Z,1509676013.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:54.067Z,1509676014.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:54.468Z,1509676014.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:54.865Z,1509676014.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:55.263Z,1509676015.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:55.664Z,1509676015.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:56.064Z,1509676016.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:56.461Z,1509676016.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:56.854Z,1509676016.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:57.264Z,1509676017.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:57.668Z,1509676017.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:58.068Z,1509676018.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:58.463Z,1509676018.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:58.864Z,1509676018.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:59.269Z,1509676019.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:26:59.660Z,1509676019.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:00.065Z,1509676020.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:00.468Z,1509676020.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:00.865Z,1509676020.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:01.314Z,1509676021.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:01.659Z,1509676021.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:02.110Z,1509676022.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:02.461Z,1509676022.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:02.867Z,1509676022.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:03.326Z,1509676023.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:03.681Z,1509676023.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:04.072Z,1509676024.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:04.502Z,1509676024.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:04.867Z,1509676024.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:05.297Z,1509676025.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:05.710Z,1509676025.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:06.077Z,1509676026.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:06.477Z,1509676026.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:06.876Z,1509676026.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:07.272Z,1509676027.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:07.664Z,1509676027.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:08.065Z,1509676028.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:08.465Z,1509676028.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:08.861Z,1509676028.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:09.273Z,1509676029.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:09.673Z,1509676029.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:10.070Z,1509676030.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:10.465Z,1509676030.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:10.862Z,1509676030.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:11.267Z,1509676031.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:11.671Z,1509676031.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:12.078Z,1509676032.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:12.483Z,1509676032.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:12.875Z,1509676032.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:13.265Z,1509676033.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:13.664Z,1509676033.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:14.067Z,1509676034.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:14.462Z,1509676034.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:14.865Z,1509676034.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:15.351Z,1509676035.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:15.683Z,1509676035.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:16.103Z,1509676036.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:16.455Z,1509676036.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:16.848Z,1509676036.848 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:27:16.848Z,1509676036.848 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:27:16.848Z,1509676036.848 [BPC1](ERROR): Data Fault
2017-11-03T02:27:16.869Z,1509676036.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:16.973Z,1509676036.973 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:27:17.256Z,1509676037.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:17.679Z,1509676037.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:18.084Z,1509676038.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:18.173Z,1509676038.173 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:27:18.173Z,1509676038.173 [BPC1] No Fault, FailCount= 1
2017-11-03T02:27:18.534Z,1509676038.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:18.882Z,1509676038.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:19.292Z,1509676039.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:19.681Z,1509676039.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:20.054Z,1509676040.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:20.478Z,1509676040.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:20.855Z,1509676040.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:21.283Z,1509676041.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:21.685Z,1509676041.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:22.083Z,1509676042.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:22.453Z,1509676042.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:22.857Z,1509676042.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:23.264Z,1509676043.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:23.657Z,1509676043.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:24.068Z,1509676044.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:24.484Z,1509676044.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:24.887Z,1509676044.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:25.290Z,1509676045.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:25.654Z,1509676045.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:26.056Z,1509676046.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:26.458Z,1509676046.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:26.656Z,1509676046.656 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:27:26.656Z,1509676046.656 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T02:27:26.656Z,1509676046.656 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:27:26.861Z,1509676046.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:27:26.862Z,1509676046.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:26.957Z,1509676046.957 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:27:26.957Z,1509676046.957 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T02:27:27.064Z,1509676047.064 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:27:27.232Z,1509676047.232 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:27:27.267Z,1509676047.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:27:27.268Z,1509676047.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:27.674Z,1509676047.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:27:27.675Z,1509676047.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:27.675Z,1509676047.675 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2017-11-03T02:27:27.675Z,1509676047.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:27:27.697Z,1509676047.697 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:27.697Z,1509676047.697 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2017-11-03T02:27:27.698Z,1509676047.698 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:27:27.700Z,1509676047.700 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:27.700Z,1509676047.700 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2017-11-03T02:27:27.700Z,1509676047.700 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:27:27.789Z,1509676047.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:27:27.789Z,1509676047.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:27:27.790Z,1509676047.790 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:27:28.156Z,1509676048.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:27:28.156Z,1509676048.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2017-11-03T02:27:28.157Z,1509676048.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:27:28.157Z,1509676048.157 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2017-11-03T02:27:28.157Z,1509676048.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:27:28.157Z,1509676048.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2017-11-03T02:27:28.461Z,1509676048.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:27:28.462Z,1509676048.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:27:28.462Z,1509676048.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:27:28.462Z,1509676048.462 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:27:28.463Z,1509676048.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:27:28.463Z,1509676048.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:27:28.464Z,1509676048.464 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:27:28.464Z,1509676048.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:27:28.464Z,1509676048.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:27:28.866Z,1509676048.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:27:28.867Z,1509676048.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:29.270Z,1509676049.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:27:29.271Z,1509676049.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:29.663Z,1509676049.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:27:29.664Z,1509676049.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:32.848Z,1509676052.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:27:32.849Z,1509676052.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:33.014Z,1509676053.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T02:27:33.015Z,1509676053.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:33.407Z,1509676053.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T02:27:33.408Z,1509676053.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:33.826Z,1509676053.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T02:27:33.827Z,1509676053.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:34.186Z,1509676054.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T02:27:34.187Z,1509676054.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:34.605Z,1509676054.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T02:27:34.606Z,1509676054.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:35.004Z,1509676055.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T02:27:35.005Z,1509676055.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:35.433Z,1509676055.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T02:27:35.434Z,1509676055.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:35.809Z,1509676055.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T02:27:35.810Z,1509676055.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:36.186Z,1509676056.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T02:27:36.187Z,1509676056.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:36.582Z,1509676056.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T02:27:36.583Z,1509676056.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:37.010Z,1509676057.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-03T02:27:37.011Z,1509676057.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:37.411Z,1509676057.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-03T02:27:37.412Z,1509676057.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:37.810Z,1509676057.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T02:27:37.811Z,1509676057.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:38.181Z,1509676058.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T02:27:38.182Z,1509676058.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:38.582Z,1509676058.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T02:27:38.583Z,1509676058.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:38.992Z,1509676058.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T02:27:39.009Z,1509676059.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:39.408Z,1509676059.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T02:27:39.409Z,1509676059.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:39.811Z,1509676059.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T02:27:39.812Z,1509676059.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:40.186Z,1509676060.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T02:27:40.187Z,1509676060.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:40.581Z,1509676060.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T02:27:40.582Z,1509676060.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:41.010Z,1509676061.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T02:27:41.011Z,1509676061.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:41.391Z,1509676061.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T02:27:41.392Z,1509676061.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:41.810Z,1509676061.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T02:27:41.810Z,1509676061.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:42.186Z,1509676062.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T02:27:42.187Z,1509676062.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:42.582Z,1509676062.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T02:27:42.583Z,1509676062.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:43.009Z,1509676063.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T02:27:43.010Z,1509676063.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:43.411Z,1509676063.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T02:27:43.412Z,1509676063.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:43.816Z,1509676063.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T02:27:43.817Z,1509676063.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:44.185Z,1509676064.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T02:27:44.186Z,1509676064.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:44.590Z,1509676064.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T02:27:44.591Z,1509676064.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:44.992Z,1509676064.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T02:27:45.009Z,1509676065.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:45.409Z,1509676065.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T02:27:45.410Z,1509676065.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:45.838Z,1509676065.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T02:27:45.839Z,1509676065.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:46.179Z,1509676066.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T02:27:46.179Z,1509676066.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:46.584Z,1509676066.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:47.011Z,1509676067.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:47.423Z,1509676067.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:47.791Z,1509676067.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:48.184Z,1509676068.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:48.615Z,1509676068.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:49.013Z,1509676069.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:49.435Z,1509676069.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:49.843Z,1509676069.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:50.183Z,1509676070.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:50.583Z,1509676070.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:51.012Z,1509676071.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:51.395Z,1509676071.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:51.815Z,1509676071.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:52.191Z,1509676072.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:52.582Z,1509676072.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:53.013Z,1509676073.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:53.412Z,1509676073.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:53.796Z,1509676073.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:54.188Z,1509676074.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:54.583Z,1509676074.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:54.996Z,1509676074.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:55.415Z,1509676075.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:55.815Z,1509676075.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:56.184Z,1509676076.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:56.591Z,1509676076.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:56.989Z,1509676076.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:57.413Z,1509676077.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:57.813Z,1509676077.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:58.185Z,1509676078.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:58.583Z,1509676078.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:59.013Z,1509676079.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:59.412Z,1509676079.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:27:59.815Z,1509676079.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:00.230Z,1509676080.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:00.591Z,1509676080.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:00.991Z,1509676080.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:01.393Z,1509676081.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:01.793Z,1509676081.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:02.224Z,1509676082.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:02.583Z,1509676082.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:03.034Z,1509676083.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:03.402Z,1509676083.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:03.824Z,1509676083.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:04.189Z,1509676084.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:04.626Z,1509676084.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:04.996Z,1509676084.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:05.395Z,1509676085.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:05.795Z,1509676085.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:06.188Z,1509676086.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:06.588Z,1509676086.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:07.002Z,1509676087.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:07.395Z,1509676087.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:07.803Z,1509676087.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:08.191Z,1509676088.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:08.590Z,1509676088.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:09.003Z,1509676089.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:09.398Z,1509676089.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:09.796Z,1509676089.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:10.190Z,1509676090.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:10.591Z,1509676090.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:10.995Z,1509676090.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:11.399Z,1509676091.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:11.830Z,1509676091.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:12.191Z,1509676092.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:12.591Z,1509676092.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:12.999Z,1509676092.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:13.402Z,1509676093.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:13.795Z,1509676093.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:14.188Z,1509676094.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:14.591Z,1509676094.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:14.999Z,1509676094.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:15.398Z,1509676095.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:15.840Z,1509676095.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:16.187Z,1509676096.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:16.641Z,1509676096.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:16.995Z,1509676096.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:17.427Z,1509676097.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:17.804Z,1509676097.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:18.222Z,1509676098.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:18.626Z,1509676098.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:18.999Z,1509676098.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:19.396Z,1509676099.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:19.795Z,1509676099.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:20.190Z,1509676100.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:20.590Z,1509676100.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:20.999Z,1509676100.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:21.399Z,1509676101.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:21.795Z,1509676101.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:22.190Z,1509676102.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:22.587Z,1509676102.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:22.995Z,1509676102.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:23.403Z,1509676103.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:23.823Z,1509676103.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:24.190Z,1509676104.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:24.591Z,1509676104.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:24.999Z,1509676104.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:25.395Z,1509676105.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:25.803Z,1509676105.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:26.189Z,1509676106.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:26.588Z,1509676106.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:26.995Z,1509676106.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:27.399Z,1509676107.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:27.802Z,1509676107.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:28.188Z,1509676108.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:28.587Z,1509676108.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:28.995Z,1509676108.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:29.403Z,1509676109.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:29.825Z,1509676109.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:32.935Z,1509676112.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:33.107Z,1509676113.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:33.531Z,1509676113.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:33.901Z,1509676113.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:34.330Z,1509676114.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:34.722Z,1509676114.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:35.090Z,1509676115.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:35.487Z,1509676115.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:35.887Z,1509676115.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:36.296Z,1509676116.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:36.696Z,1509676116.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:37.095Z,1509676117.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:37.486Z,1509676117.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:37.891Z,1509676117.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:38.284Z,1509676118.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:38.686Z,1509676118.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:39.103Z,1509676119.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:39.495Z,1509676119.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:39.895Z,1509676119.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:40.291Z,1509676120.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:40.687Z,1509676120.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:41.087Z,1509676121.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:41.487Z,1509676121.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:41.883Z,1509676121.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:42.302Z,1509676122.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:42.707Z,1509676122.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:43.095Z,1509676123.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:43.487Z,1509676123.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:43.887Z,1509676123.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:44.285Z,1509676124.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:44.690Z,1509676124.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:45.103Z,1509676125.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:45.503Z,1509676125.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:45.897Z,1509676125.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:46.291Z,1509676126.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:46.715Z,1509676126.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:47.114Z,1509676127.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:47.489Z,1509676127.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:47.907Z,1509676127.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:48.304Z,1509676128.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:48.738Z,1509676128.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:49.107Z,1509676129.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:49.503Z,1509676129.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:49.894Z,1509676129.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:50.297Z,1509676130.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:50.700Z,1509676130.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:51.099Z,1509676131.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:51.515Z,1509676131.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:51.898Z,1509676131.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:52.271Z,1509676132.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:52.675Z,1509676132.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:53.074Z,1509676133.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:53.472Z,1509676133.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:53.876Z,1509676133.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:54.301Z,1509676134.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:54.700Z,1509676134.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:55.103Z,1509676135.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:55.474Z,1509676135.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:55.903Z,1509676135.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:56.275Z,1509676136.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:56.705Z,1509676136.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:57.103Z,1509676137.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:57.511Z,1509676137.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:57.904Z,1509676137.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:58.274Z,1509676138.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:58.674Z,1509676138.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:59.073Z,1509676139.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:59.483Z,1509676139.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:28:59.883Z,1509676139.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:00.303Z,1509676140.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:00.711Z,1509676140.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:01.103Z,1509676141.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:01.547Z,1509676141.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:01.887Z,1509676141.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:02.310Z,1509676142.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:02.681Z,1509676142.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:03.115Z,1509676143.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:03.527Z,1509676143.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:03.887Z,1509676143.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:04.287Z,1509676144.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:04.678Z,1509676144.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:05.077Z,1509676145.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:05.475Z,1509676145.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:05.887Z,1509676145.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:06.288Z,1509676146.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:06.688Z,1509676146.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:07.107Z,1509676147.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:07.481Z,1509676147.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:07.874Z,1509676147.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:08.282Z,1509676148.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:08.674Z,1509676148.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:09.107Z,1509676149.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:09.507Z,1509676149.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:09.908Z,1509676149.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:10.274Z,1509676150.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:10.678Z,1509676150.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:11.073Z,1509676151.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:11.483Z,1509676151.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:11.878Z,1509676151.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:12.307Z,1509676152.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:12.705Z,1509676152.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:13.107Z,1509676153.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:13.481Z,1509676153.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:13.874Z,1509676153.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:14.283Z,1509676154.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:14.686Z,1509676154.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:15.108Z,1509676155.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:15.567Z,1509676155.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:15.906Z,1509676155.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:16.278Z,1509676156.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:16.714Z,1509676156.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:17.077Z,1509676157.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:17.514Z,1509676157.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:17.923Z,1509676157.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:18.284Z,1509676158.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:18.705Z,1509676158.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:19.107Z,1509676159.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:19.478Z,1509676159.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:19.879Z,1509676159.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:20.279Z,1509676160.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:20.678Z,1509676160.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:21.105Z,1509676161.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:21.507Z,1509676161.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:21.882Z,1509676161.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:22.279Z,1509676162.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:22.683Z,1509676162.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:23.078Z,1509676163.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:23.480Z,1509676163.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:23.880Z,1509676163.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:24.284Z,1509676164.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:24.706Z,1509676164.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:25.106Z,1509676165.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:25.479Z,1509676165.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:25.879Z,1509676165.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:26.307Z,1509676166.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:26.679Z,1509676166.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:27.106Z,1509676167.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:27.509Z,1509676167.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:27.910Z,1509676167.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:28.280Z,1509676168.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:28.679Z,1509676168.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:29.079Z,1509676169.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:29.082Z,1509676169.082 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T02:29:29.082Z,1509676169.082 [Default:CheckIn:C.Wait] Stopped
2017-11-03T02:29:29.082Z,1509676169.082 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T02:29:29.082Z,1509676169.082 [Default:CheckIn:D] Running Loop=1
2017-11-03T02:29:29.485Z,1509676169.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:29.488Z,1509676169.488 [Default:CheckIn:D] Stopped
2017-11-03T02:29:29.488Z,1509676169.488 [Default:CheckIn:E] Running Loop=1
2017-11-03T02:29:29.959Z,1509676169.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:29.966Z,1509676169.966 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.365356 min 
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn:E] Stopped
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn] Stopped
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn](INFO): Running loop #14
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn] Running Loop=14
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T02:29:29.967Z,1509676169.967 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T02:29:32.994Z,1509676172.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:33.210Z,1509676173.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:33.581Z,1509676173.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:33.983Z,1509676173.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:34.372Z,1509676174.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:34.783Z,1509676174.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:35.219Z,1509676175.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:35.585Z,1509676175.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:35.987Z,1509676175.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:36.372Z,1509676176.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:36.775Z,1509676176.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:37.178Z,1509676177.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:37.574Z,1509676177.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:37.977Z,1509676177.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:38.386Z,1509676178.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:38.777Z,1509676178.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:39.171Z,1509676179.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:39.569Z,1509676179.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:39.977Z,1509676179.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:40.379Z,1509676180.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:40.791Z,1509676180.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:41.173Z,1509676181.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:41.568Z,1509676181.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:41.980Z,1509676181.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:42.390Z,1509676182.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:42.783Z,1509676182.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:43.177Z,1509676183.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:43.567Z,1509676183.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:43.987Z,1509676183.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:44.385Z,1509676184.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:44.780Z,1509676184.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:45.178Z,1509676185.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:45.558Z,1509676185.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:45.991Z,1509676185.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:46.386Z,1509676186.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:46.786Z,1509676186.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:47.246Z,1509676187.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:47.563Z,1509676187.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:48.012Z,1509676188.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:48.390Z,1509676188.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:48.831Z,1509676188.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:49.195Z,1509676189.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:49.561Z,1509676189.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:49.981Z,1509676189.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:50.381Z,1509676190.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:50.786Z,1509676190.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:51.159Z,1509676191.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:51.557Z,1509676191.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:51.986Z,1509676191.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:52.386Z,1509676192.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:52.786Z,1509676192.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:53.162Z,1509676193.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:53.559Z,1509676193.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:53.982Z,1509676193.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:54.390Z,1509676194.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:54.791Z,1509676194.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:55.159Z,1509676195.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:55.559Z,1509676195.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:55.980Z,1509676195.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:56.386Z,1509676196.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:56.799Z,1509676196.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:57.160Z,1509676197.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:57.559Z,1509676197.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:57.981Z,1509676197.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:58.386Z,1509676198.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:58.786Z,1509676198.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:59.160Z,1509676199.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:59.559Z,1509676199.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:29:59.986Z,1509676199.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:00.388Z,1509676200.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:00.786Z,1509676200.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:01.227Z,1509676201.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:01.567Z,1509676201.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:02.016Z,1509676202.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:02.393Z,1509676202.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:02.818Z,1509676202.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:03.171Z,1509676203.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:03.592Z,1509676203.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:03.992Z,1509676203.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:04.380Z,1509676204.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:04.778Z,1509676204.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:05.167Z,1509676205.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:05.562Z,1509676205.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:05.980Z,1509676205.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:06.380Z,1509676206.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:06.780Z,1509676206.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:07.170Z,1509676207.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:07.566Z,1509676207.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:07.996Z,1509676207.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:08.371Z,1509676208.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:08.768Z,1509676208.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:09.166Z,1509676209.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:09.567Z,1509676209.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:09.972Z,1509676209.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:10.383Z,1509676210.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:10.773Z,1509676210.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:11.171Z,1509676211.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:11.568Z,1509676211.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:11.978Z,1509676211.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:12.373Z,1509676212.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:12.773Z,1509676212.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:13.163Z,1509676213.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:13.567Z,1509676213.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:13.973Z,1509676213.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:14.372Z,1509676214.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:14.773Z,1509676214.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:15.220Z,1509676215.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:15.587Z,1509676215.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:15.981Z,1509676215.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:16.422Z,1509676216.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:16.780Z,1509676216.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:17.195Z,1509676217.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:17.615Z,1509676217.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:17.981Z,1509676217.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:18.390Z,1509676218.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:18.780Z,1509676218.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:19.172Z,1509676219.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:19.572Z,1509676219.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:19.981Z,1509676219.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:20.386Z,1509676220.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:20.777Z,1509676220.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:21.169Z,1509676221.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:21.568Z,1509676221.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:21.977Z,1509676221.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:22.387Z,1509676222.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:22.786Z,1509676222.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:23.171Z,1509676223.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:23.567Z,1509676223.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:23.980Z,1509676223.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:24.375Z,1509676224.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:24.780Z,1509676224.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:25.168Z,1509676225.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:25.570Z,1509676225.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:25.980Z,1509676225.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:26.387Z,1509676226.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:26.780Z,1509676226.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:27.175Z,1509676227.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:27.575Z,1509676227.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:27.975Z,1509676227.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:28.379Z,1509676228.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:28.779Z,1509676228.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:28.780Z,1509676228.780 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2017-11-03T02:30:28.780Z,1509676228.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:30:28.782Z,1509676228.782 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:28.782Z,1509676228.782 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2017-11-03T02:30:28.782Z,1509676228.782 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:30:28.784Z,1509676228.784 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:28.784Z,1509676228.784 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2017-11-03T02:30:28.784Z,1509676228.784 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:30:28.857Z,1509676228.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:30:28.857Z,1509676228.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:30:28.857Z,1509676228.857 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:30:29.265Z,1509676229.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:30:29.265Z,1509676229.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2017-11-03T02:30:29.265Z,1509676229.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:30:29.265Z,1509676229.265 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2017-11-03T02:30:29.266Z,1509676229.266 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:30:29.266Z,1509676229.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2017-11-03T02:30:29.617Z,1509676229.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:30:29.617Z,1509676229.617 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:30:29.618Z,1509676229.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:30:29.618Z,1509676229.618 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:30:29.619Z,1509676229.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:30:29.619Z,1509676229.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:30:29.619Z,1509676229.619 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:30:29.620Z,1509676229.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:30:29.620Z,1509676229.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:30:30.018Z,1509676230.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:30:30.019Z,1509676230.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:33.069Z,1509676233.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T02:30:33.070Z,1509676233.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:33.266Z,1509676233.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T02:30:33.267Z,1509676233.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:33.610Z,1509676233.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:30:33.611Z,1509676233.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:34.027Z,1509676234.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:30:34.028Z,1509676234.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:34.447Z,1509676234.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T02:30:34.448Z,1509676234.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:34.803Z,1509676234.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:30:34.805Z,1509676234.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:35.215Z,1509676235.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:30:35.216Z,1509676235.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:35.618Z,1509676235.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:30:35.619Z,1509676235.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:36.019Z,1509676236.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:30:36.020Z,1509676236.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:36.406Z,1509676236.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:30:36.407Z,1509676236.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:36.811Z,1509676236.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:30:36.812Z,1509676236.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:37.211Z,1509676237.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:30:37.213Z,1509676237.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:37.590Z,1509676237.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:30:37.591Z,1509676237.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:38.022Z,1509676238.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:30:38.023Z,1509676238.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:38.423Z,1509676238.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:30:38.425Z,1509676238.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:38.819Z,1509676238.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:30:38.821Z,1509676238.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:39.194Z,1509676239.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:30:39.195Z,1509676239.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:39.621Z,1509676239.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:30:39.622Z,1509676239.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:39.994Z,1509676239.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:30:39.995Z,1509676239.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:40.395Z,1509676240.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:30:40.396Z,1509676240.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:40.794Z,1509676240.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:30:40.795Z,1509676240.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:41.223Z,1509676241.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:30:41.224Z,1509676241.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:41.633Z,1509676241.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T02:30:41.634Z,1509676241.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:42.024Z,1509676242.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:30:42.025Z,1509676242.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:42.426Z,1509676242.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:30:42.427Z,1509676242.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:42.794Z,1509676242.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:30:42.795Z,1509676242.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:43.198Z,1509676243.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:30:43.199Z,1509676243.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:43.593Z,1509676243.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:30:43.594Z,1509676243.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:44.022Z,1509676244.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:30:44.023Z,1509676244.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:44.426Z,1509676244.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:30:44.427Z,1509676244.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:44.824Z,1509676244.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:30:44.826Z,1509676244.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:45.223Z,1509676245.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:30:45.223Z,1509676245.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:45.591Z,1509676245.591 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:30:45.591Z,1509676245.591 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:30:45.592Z,1509676245.592 [BPC1](ERROR): Data Fault
2017-11-03T02:30:45.599Z,1509676245.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:30:45.600Z,1509676245.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:45.709Z,1509676245.709 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:30:45.999Z,1509676245.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:30:45.000Z,1509676246.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:46.402Z,1509676246.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:30:46.403Z,1509676246.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:46.806Z,1509676246.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:30:46.807Z,1509676246.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:46.905Z,1509676246.905 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:30:46.905Z,1509676246.905 [BPC1] No Fault, FailCount= 1
2017-11-03T02:30:47.275Z,1509676247.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T02:30:47.275Z,1509676247.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:47.615Z,1509676247.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:30:47.633Z,1509676247.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:48.038Z,1509676248.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T02:30:48.039Z,1509676248.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:48.404Z,1509676248.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:30:48.405Z,1509676248.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:48.808Z,1509676248.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:49.205Z,1509676249.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:49.600Z,1509676249.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:50.008Z,1509676250.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:50.416Z,1509676250.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:50.814Z,1509676250.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:51.199Z,1509676251.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:51.611Z,1509676251.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:52.009Z,1509676252.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:52.401Z,1509676252.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:52.803Z,1509676252.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:53.222Z,1509676253.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:53.619Z,1509676253.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:54.015Z,1509676254.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:54.405Z,1509676254.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:54.811Z,1509676254.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:55.206Z,1509676255.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:55.606Z,1509676255.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:56.015Z,1509676256.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:56.418Z,1509676256.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:56.826Z,1509676256.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:57.211Z,1509676257.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:57.603Z,1509676257.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:58.007Z,1509676258.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:58.405Z,1509676258.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:58.803Z,1509676258.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:59.216Z,1509676259.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:30:59.623Z,1509676259.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:00.122Z,1509676260.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:00.396Z,1509676260.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:00.824Z,1509676260.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:01.225Z,1509676261.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:01.666Z,1509676261.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:02.078Z,1509676262.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:02.436Z,1509676262.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:02.849Z,1509676262.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:03.231Z,1509676263.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:03.642Z,1509676263.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:04.039Z,1509676264.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:04.429Z,1509676264.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:04.818Z,1509676264.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:05.252Z,1509676265.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:05.629Z,1509676265.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:06.024Z,1509676266.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:06.446Z,1509676266.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:06.833Z,1509676266.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:07.226Z,1509676267.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:07.633Z,1509676267.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:08.044Z,1509676268.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:08.460Z,1509676268.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:08.864Z,1509676268.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:09.195Z,1509676269.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:09.658Z,1509676269.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:10.018Z,1509676270.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:10.422Z,1509676270.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:10.825Z,1509676270.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:11.231Z,1509676271.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:11.636Z,1509676271.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:12.015Z,1509676272.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:12.402Z,1509676272.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:12.804Z,1509676272.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:13.201Z,1509676273.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:13.601Z,1509676273.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:14.036Z,1509676274.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:14.495Z,1509676274.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:14.806Z,1509676274.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:15.239Z,1509676275.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:15.602Z,1509676275.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:16.030Z,1509676276.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:16.447Z,1509676276.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:16.802Z,1509676276.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:17.207Z,1509676277.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:17.614Z,1509676277.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:18.015Z,1509676278.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:18.398Z,1509676278.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:18.799Z,1509676278.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:19.211Z,1509676279.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:19.600Z,1509676279.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:20.012Z,1509676280.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:20.422Z,1509676280.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:20.815Z,1509676280.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:21.200Z,1509676281.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:21.641Z,1509676281.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:21.999Z,1509676281.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:22.400Z,1509676282.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:22.802Z,1509676282.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:23.212Z,1509676283.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:23.604Z,1509676283.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:24.030Z,1509676284.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:24.402Z,1509676284.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:24.799Z,1509676284.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:25.199Z,1509676285.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:25.598Z,1509676285.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:26.028Z,1509676286.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:26.412Z,1509676286.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:26.835Z,1509676286.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:27.203Z,1509676287.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:27.603Z,1509676287.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:28.003Z,1509676288.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:28.458Z,1509676288.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:28.854Z,1509676288.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:29.216Z,1509676289.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:29.647Z,1509676289.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:30.020Z,1509676290.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:33.107Z,1509676293.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:33.253Z,1509676293.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:33.699Z,1509676293.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:34.066Z,1509676294.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:34.463Z,1509676294.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:34.848Z,1509676294.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:35.251Z,1509676295.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:35.651Z,1509676295.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:36.059Z,1509676296.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:36.455Z,1509676296.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:36.855Z,1509676296.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:37.248Z,1509676297.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:37.650Z,1509676297.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:38.055Z,1509676298.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:38.448Z,1509676298.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:38.852Z,1509676298.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:39.263Z,1509676299.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:39.653Z,1509676299.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:40.052Z,1509676300.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:40.455Z,1509676300.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:40.848Z,1509676300.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:41.247Z,1509676301.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:41.652Z,1509676301.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:42.057Z,1509676302.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:42.462Z,1509676302.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:42.863Z,1509676302.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:42.941Z,1509676302.941 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T02:31:43.255Z,1509676303.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:43.653Z,1509676303.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:44.048Z,1509676304.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:44.456Z,1509676304.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:44.858Z,1509676304.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:45.317Z,1509676305.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:45.666Z,1509676305.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:46.082Z,1509676306.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:46.455Z,1509676306.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:46.856Z,1509676306.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:47.275Z,1509676307.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:47.639Z,1509676307.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:48.099Z,1509676308.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:48.487Z,1509676308.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:48.859Z,1509676308.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:49.237Z,1509676309.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:49.638Z,1509676309.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:50.058Z,1509676310.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:50.459Z,1509676310.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:50.839Z,1509676310.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:51.263Z,1509676311.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:51.659Z,1509676311.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:52.060Z,1509676312.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:52.439Z,1509676312.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:52.837Z,1509676312.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:53.262Z,1509676313.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:53.657Z,1509676313.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:54.055Z,1509676314.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:54.462Z,1509676314.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:54.859Z,1509676314.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:55.254Z,1509676315.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:55.628Z,1509676315.628 [PNI_TCM](ERROR): CRC does not match. Expected:0x52597 got:0x7361
2017-11-03T02:31:55.666Z,1509676315.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:56.037Z,1509676316.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:56.458Z,1509676316.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:56.860Z,1509676316.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:57.260Z,1509676317.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:57.662Z,1509676317.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:58.060Z,1509676318.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:58.458Z,1509676318.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:58.827Z,1509676318.827 [PNI_TCM](ERROR): CRC does not match. Expected:0x42277 got:0x20071
2017-11-03T02:31:58.858Z,1509676318.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:59.239Z,1509676319.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:31:59.662Z,1509676319.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:00.062Z,1509676320.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:00.483Z,1509676320.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:00.891Z,1509676320.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:01.259Z,1509676321.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:01.671Z,1509676321.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:02.037Z,1509676322.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:02.475Z,1509676322.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:02.878Z,1509676322.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:03.262Z,1509676323.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:03.661Z,1509676323.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:04.071Z,1509676324.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:04.458Z,1509676324.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:04.838Z,1509676324.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:05.237Z,1509676325.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:05.643Z,1509676325.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:06.063Z,1509676326.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:06.471Z,1509676326.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:06.861Z,1509676326.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:07.263Z,1509676327.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:07.666Z,1509676327.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:08.037Z,1509676328.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:08.437Z,1509676328.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:08.838Z,1509676328.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:09.261Z,1509676329.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:09.666Z,1509676329.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:10.067Z,1509676330.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:10.443Z,1509676330.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:10.866Z,1509676330.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:11.232Z,1509676331.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-03T02:32:11.271Z,1509676331.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:11.663Z,1509676331.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:12.070Z,1509676332.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:12.466Z,1509676332.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:12.862Z,1509676332.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:13.241Z,1509676333.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:13.638Z,1509676333.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:14.063Z,1509676334.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:14.434Z,1509676334.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-03T02:32:14.470Z,1509676334.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:14.906Z,1509676334.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:15.268Z,1509676335.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:15.672Z,1509676335.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:16.087Z,1509676336.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:16.441Z,1509676336.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:16.860Z,1509676336.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:17.279Z,1509676337.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:17.633Z,1509676337.633 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T02:32:17.669Z,1509676337.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:18.069Z,1509676338.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:18.470Z,1509676338.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:18.870Z,1509676338.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:19.242Z,1509676339.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:19.640Z,1509676339.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:20.047Z,1509676340.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:20.462Z,1509676340.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:20.834Z,1509676340.834 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T02:32:20.867Z,1509676340.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:21.269Z,1509676341.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:21.670Z,1509676341.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:22.070Z,1509676342.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:22.434Z,1509676342.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x17519 got:0x11271
2017-11-03T02:32:22.478Z,1509676342.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:22.851Z,1509676342.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:23.243Z,1509676343.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:23.668Z,1509676343.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:24.070Z,1509676344.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:24.469Z,1509676344.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:24.869Z,1509676344.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:25.268Z,1509676345.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:25.641Z,1509676345.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:26.041Z,1509676346.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:26.442Z,1509676346.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:26.847Z,1509676346.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:27.271Z,1509676347.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:27.669Z,1509676347.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:28.050Z,1509676348.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:28.468Z,1509676348.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:28.842Z,1509676348.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:29.313Z,1509676349.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:29.647Z,1509676349.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:30.090Z,1509676350.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:33.175Z,1509676353.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:33.379Z,1509676353.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:33.767Z,1509676353.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:34.129Z,1509676354.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:34.529Z,1509676354.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:34.928Z,1509676354.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:35.341Z,1509676355.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:35.740Z,1509676355.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:36.140Z,1509676356.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:36.530Z,1509676356.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:36.929Z,1509676356.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:37.335Z,1509676357.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:37.730Z,1509676357.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:38.141Z,1509676358.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:38.540Z,1509676358.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:38.936Z,1509676358.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:39.335Z,1509676359.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:39.729Z,1509676359.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:40.130Z,1509676360.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:40.531Z,1509676360.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:40.931Z,1509676360.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:41.346Z,1509676361.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:41.741Z,1509676361.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:42.141Z,1509676362.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:42.538Z,1509676362.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:42.929Z,1509676362.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:43.329Z,1509676363.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:43.733Z,1509676363.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:44.141Z,1509676364.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:44.540Z,1509676364.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:44.942Z,1509676364.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:45.329Z,1509676365.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:45.755Z,1509676365.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:46.158Z,1509676366.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:46.529Z,1509676366.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:46.974Z,1509676366.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:47.340Z,1509676367.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:47.779Z,1509676367.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:48.178Z,1509676368.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:48.532Z,1509676368.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:48.939Z,1509676368.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:49.329Z,1509676369.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:49.732Z,1509676369.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:50.139Z,1509676370.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:50.544Z,1509676370.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:50.940Z,1509676370.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:51.335Z,1509676371.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:51.735Z,1509676371.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:52.133Z,1509676372.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:52.531Z,1509676372.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:52.941Z,1509676372.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:53.337Z,1509676373.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:53.741Z,1509676373.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:54.129Z,1509676374.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:54.531Z,1509676374.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:54.932Z,1509676374.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:55.341Z,1509676375.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:55.745Z,1509676375.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:56.141Z,1509676376.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:56.532Z,1509676376.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:56.934Z,1509676376.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:57.333Z,1509676377.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:57.753Z,1509676377.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:58.143Z,1509676378.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:58.551Z,1509676378.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:58.941Z,1509676378.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:59.333Z,1509676379.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:32:59.731Z,1509676379.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:00.158Z,1509676380.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:00.534Z,1509676380.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:00.931Z,1509676380.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:01.344Z,1509676381.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:01.742Z,1509676381.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:02.143Z,1509676382.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:02.531Z,1509676382.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:02.944Z,1509676382.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:03.310Z,1509676383.310 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:33:03.310Z,1509676383.310 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:33:03.310Z,1509676383.310 [BPC1](ERROR): Communications Fault
2017-11-03T02:33:03.318Z,1509676383.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:03.421Z,1509676383.421 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:33:03.721Z,1509676383.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:04.143Z,1509676384.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:04.545Z,1509676384.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:04.633Z,1509676384.633 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:33:04.633Z,1509676384.633 [BPC1] No Fault, FailCount= 1
2017-11-03T02:33:04.998Z,1509676384.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:05.319Z,1509676385.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:05.715Z,1509676385.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:06.123Z,1509676386.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:06.502Z,1509676386.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:06.554Z,1509676386.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:06.901Z,1509676386.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:06.916Z,1509676386.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:07.318Z,1509676387.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:07.345Z,1509676387.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:07.718Z,1509676387.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:07.745Z,1509676387.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:08.118Z,1509676388.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:08.144Z,1509676388.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:08.505Z,1509676388.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:08.521Z,1509676388.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:08.904Z,1509676388.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:08.920Z,1509676388.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:09.301Z,1509676389.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:09.317Z,1509676389.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:09.706Z,1509676389.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:09.723Z,1509676389.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:10.148Z,1509676390.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:10.547Z,1509676390.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:10.947Z,1509676390.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:11.311Z,1509676391.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:11.326Z,1509676391.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:11.703Z,1509676391.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:11.719Z,1509676391.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:12.103Z,1509676392.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:12.119Z,1509676392.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:12.504Z,1509676392.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:12.519Z,1509676392.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:12.903Z,1509676392.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:12.919Z,1509676392.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:13.318Z,1509676393.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:13.348Z,1509676393.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:13.718Z,1509676393.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:13.749Z,1509676393.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:14.118Z,1509676394.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:14.148Z,1509676394.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:14.511Z,1509676394.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:14.551Z,1509676394.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:14.918Z,1509676394.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:15.323Z,1509676395.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:15.749Z,1509676395.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:16.147Z,1509676396.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:16.546Z,1509676396.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:16.947Z,1509676396.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:17.362Z,1509676397.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:17.727Z,1509676397.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:18.131Z,1509676398.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:18.558Z,1509676398.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:18.923Z,1509676398.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:19.375Z,1509676399.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:19.740Z,1509676399.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:20.175Z,1509676400.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:20.526Z,1509676400.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:20.926Z,1509676400.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:21.327Z,1509676401.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:21.726Z,1509676401.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:22.140Z,1509676402.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:22.557Z,1509676402.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:22.933Z,1509676402.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:23.323Z,1509676403.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:23.723Z,1509676403.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:24.131Z,1509676404.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:24.527Z,1509676404.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:24.923Z,1509676404.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:25.333Z,1509676405.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:25.740Z,1509676405.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:26.157Z,1509676406.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:26.527Z,1509676406.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:26.926Z,1509676406.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:27.328Z,1509676407.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:27.731Z,1509676407.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:28.159Z,1509676408.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:28.557Z,1509676408.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:28.957Z,1509676408.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:29.327Z,1509676409.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:29.731Z,1509676409.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:29.731Z,1509676409.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2017-11-03T02:33:29.731Z,1509676409.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:33:29.733Z,1509676409.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:29.733Z,1509676409.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2017-11-03T02:33:29.733Z,1509676409.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:33:29.735Z,1509676409.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:29.735Z,1509676409.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2017-11-03T02:33:29.735Z,1509676409.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:33:29.825Z,1509676409.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:33:29.825Z,1509676409.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:33:29.825Z,1509676409.825 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:33:30.240Z,1509676410.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:33:30.241Z,1509676410.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2017-11-03T02:33:30.241Z,1509676410.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:33:30.241Z,1509676410.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2017-11-03T02:33:30.242Z,1509676410.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:33:30.242Z,1509676410.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2017-11-03T02:33:33.305Z,1509676413.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:33:33.305Z,1509676413.305 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:33:33.306Z,1509676413.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:33:33.306Z,1509676413.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:33:33.306Z,1509676413.306 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:33:33.307Z,1509676413.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:33:33.307Z,1509676413.307 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:33:33.307Z,1509676413.307 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:33:33.308Z,1509676413.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:33:33.486Z,1509676413.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T02:33:33.487Z,1509676413.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:33.906Z,1509676413.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T02:33:33.907Z,1509676413.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:34.274Z,1509676414.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T02:33:34.275Z,1509676414.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:34.682Z,1509676414.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T02:33:34.682Z,1509676414.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:35.090Z,1509676415.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T02:33:35.091Z,1509676415.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:35.446Z,1509676415.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T02:33:35.447Z,1509676415.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:35.853Z,1509676415.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T02:33:35.854Z,1509676415.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:36.271Z,1509676416.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T02:33:36.272Z,1509676416.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:36.670Z,1509676416.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T02:33:36.671Z,1509676416.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:37.074Z,1509676417.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T02:33:37.075Z,1509676417.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:37.450Z,1509676417.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T02:33:37.451Z,1509676417.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:37.845Z,1509676417.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T02:33:37.846Z,1509676417.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:38.254Z,1509676418.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T02:33:38.255Z,1509676418.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:38.646Z,1509676418.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T02:33:38.647Z,1509676418.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:39.076Z,1509676419.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T02:33:39.077Z,1509676419.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:39.474Z,1509676419.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T02:33:39.475Z,1509676419.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:39.871Z,1509676419.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T02:33:39.873Z,1509676419.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:40.245Z,1509676420.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T02:33:40.246Z,1509676420.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:40.646Z,1509676420.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T02:33:40.647Z,1509676420.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:41.050Z,1509676421.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T02:33:41.051Z,1509676421.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:41.453Z,1509676421.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T02:33:41.454Z,1509676421.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:41.874Z,1509676421.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T02:33:41.875Z,1509676421.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:42.271Z,1509676422.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T02:33:42.273Z,1509676422.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:42.674Z,1509676422.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T02:33:42.675Z,1509676422.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:43.056Z,1509676423.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T02:33:43.065Z,1509676423.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:43.454Z,1509676423.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T02:33:43.455Z,1509676423.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:43.853Z,1509676423.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T02:33:43.854Z,1509676423.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:44.254Z,1509676424.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T02:33:44.255Z,1509676424.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:44.674Z,1509676424.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T02:33:44.675Z,1509676424.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:45.079Z,1509676425.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T02:33:45.080Z,1509676425.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:45.506Z,1509676425.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T02:33:45.507Z,1509676425.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:45.878Z,1509676425.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T02:33:45.879Z,1509676425.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:46.246Z,1509676426.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T02:33:46.247Z,1509676426.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:46.658Z,1509676426.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T02:33:46.659Z,1509676426.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:47.046Z,1509676427.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T02:33:47.047Z,1509676427.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:47.502Z,1509676427.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T02:33:47.503Z,1509676427.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:47.854Z,1509676427.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T02:33:47.855Z,1509676427.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:48.294Z,1509676428.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T02:33:48.295Z,1509676428.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:48.678Z,1509676428.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T02:33:48.678Z,1509676428.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:49.098Z,1509676429.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T02:33:49.099Z,1509676429.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:49.446Z,1509676429.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T02:33:49.447Z,1509676429.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:49.891Z,1509676429.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:50.247Z,1509676430.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:50.650Z,1509676430.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:51.080Z,1509676431.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:51.478Z,1509676431.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:51.879Z,1509676431.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:52.232Z,1509676432.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:52.247Z,1509676432.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:52.632Z,1509676432.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:52.654Z,1509676432.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:53.031Z,1509676433.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:53.046Z,1509676433.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:53.432Z,1509676433.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:53.447Z,1509676433.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:53.840Z,1509676433.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:53.855Z,1509676433.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:54.214Z,1509676434.214 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T02:33:54.215Z,1509676434.215 [NAL9602] Data Fault, FailCount= 3
2017-11-03T02:33:54.215Z,1509676434.215 [NAL9602](ERROR): Data Fault
2017-11-03T02:33:54.231Z,1509676434.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:54.246Z,1509676434.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:54.337Z,1509676434.337 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T02:33:54.619Z,1509676434.619 [NAL9602](INFO): Powering down
2017-11-03T02:33:54.637Z,1509676434.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:54.658Z,1509676434.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:55.035Z,1509676435.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:55.055Z,1509676435.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:55.434Z,1509676435.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:55.450Z,1509676435.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:55.541Z,1509676435.541 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T02:33:55.541Z,1509676435.541 [NAL9602] No Fault, FailCount= 3
2017-11-03T02:33:55.835Z,1509676435.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:55.850Z,1509676435.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:56.235Z,1509676436.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:56.251Z,1509676436.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:56.635Z,1509676436.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:56.650Z,1509676436.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:57.035Z,1509676437.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:57.050Z,1509676437.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:57.435Z,1509676437.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:57.451Z,1509676437.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:57.836Z,1509676437.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:33:57.851Z,1509676437.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:58.250Z,1509676438.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:58.650Z,1509676438.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:59.054Z,1509676439.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:59.454Z,1509676439.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:33:59.855Z,1509676439.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:00.291Z,1509676440.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:00.654Z,1509676440.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:01.054Z,1509676441.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:01.454Z,1509676441.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:01.891Z,1509676441.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:02.251Z,1509676442.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:02.649Z,1509676442.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:03.088Z,1509676443.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:03.452Z,1509676443.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:03.887Z,1509676443.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:04.288Z,1509676444.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:04.655Z,1509676444.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:05.055Z,1509676445.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:05.455Z,1509676445.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:05.855Z,1509676445.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:06.249Z,1509676446.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:06.652Z,1509676446.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:07.050Z,1509676447.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:07.449Z,1509676447.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:07.853Z,1509676447.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:08.249Z,1509676448.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:08.655Z,1509676448.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:09.053Z,1509676449.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:09.449Z,1509676449.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:09.855Z,1509676449.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:10.254Z,1509676450.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:10.656Z,1509676450.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:11.055Z,1509676451.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:11.453Z,1509676451.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:11.856Z,1509676451.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:12.256Z,1509676452.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:12.655Z,1509676452.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:13.057Z,1509676453.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:13.456Z,1509676453.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:13.857Z,1509676453.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:14.256Z,1509676454.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:14.656Z,1509676454.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:15.102Z,1509676455.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:15.456Z,1509676455.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:15.856Z,1509676455.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:16.279Z,1509676456.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:16.651Z,1509676456.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:17.056Z,1509676457.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:17.498Z,1509676457.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:17.851Z,1509676457.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:18.275Z,1509676458.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:18.698Z,1509676458.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:19.056Z,1509676459.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:19.455Z,1509676459.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:19.857Z,1509676459.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:20.251Z,1509676460.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:20.655Z,1509676460.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:21.056Z,1509676461.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:21.457Z,1509676461.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:21.850Z,1509676461.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:22.257Z,1509676462.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:22.651Z,1509676462.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:23.050Z,1509676463.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:23.456Z,1509676463.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:23.860Z,1509676463.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:24.258Z,1509676464.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:24.657Z,1509676464.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:25.018Z,1509676465.018 [NAL9602](INFO): Powering up NAL9602
2017-11-03T02:34:25.063Z,1509676465.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:25.455Z,1509676465.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:25.867Z,1509676465.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:26.256Z,1509676466.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:26.659Z,1509676466.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:27.060Z,1509676467.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:27.464Z,1509676467.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:27.860Z,1509676467.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:28.260Z,1509676468.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:28.657Z,1509676468.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:29.058Z,1509676469.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:29.483Z,1509676469.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:29.857Z,1509676469.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:30.258Z,1509676470.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:30.262Z,1509676470.262 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T02:29:29.0Z
2017-11-03T02:34:30.262Z,1509676470.262 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T02:34:30.262Z,1509676470.262 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T02:34:33.372Z,1509676473.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:33.753Z,1509676473.753 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171103T001125/Courier0056.lzma
2017-11-03T02:34:33.802Z,1509676473.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:34.086Z,1509676474.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:34.453Z,1509676474.453 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0056.lzma.bak
2017-11-03T02:34:34.453Z,1509676474.453 [DataOverHttps](INFO): SBD MOMSN=5182495
2017-11-03T02:34:34.489Z,1509676474.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:35.179Z,1509676475.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:35.335Z,1509676475.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:38.403Z,1509676478.403 [NAL9602](INFO): NAL9602 initialized
2017-11-03T02:34:38.479Z,1509676478.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:38.635Z,1509676478.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:39.066Z,1509676479.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:39.423Z,1509676479.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:39.824Z,1509676479.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:40.222Z,1509676480.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:43.326Z,1509676483.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:43.425Z,1509676483.425 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20171103T001125/Express0057.lzma
2017-11-03T02:34:43.503Z,1509676483.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:43.879Z,1509676483.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:44.223Z,1509676484.223 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0057.lzma.bak
2017-11-03T02:34:44.223Z,1509676484.223 [DataOverHttps](INFO): SBD MOMSN=5182499
2017-11-03T02:34:44.291Z,1509676484.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:44.878Z,1509676484.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:44.882Z,1509676484.882 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T02:34:44.882Z,1509676484.882 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T02:34:44.882Z,1509676484.882 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T02:34:45.087Z,1509676485.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:48.181Z,1509676488.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:48.343Z,1509676488.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:48.731Z,1509676488.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:49.134Z,1509676489.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:49.531Z,1509676489.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:49.963Z,1509676489.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:50.321Z,1509676490.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:50.727Z,1509676490.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:51.147Z,1509676491.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:51.523Z,1509676491.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:51.939Z,1509676491.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:52.370Z,1509676492.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:52.734Z,1509676492.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:53.166Z,1509676493.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:53.551Z,1509676493.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:53.921Z,1509676493.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:54.319Z,1509676494.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:54.731Z,1509676494.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:55.135Z,1509676495.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:55.527Z,1509676495.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:55.920Z,1509676495.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:56.321Z,1509676496.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:56.723Z,1509676496.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:57.124Z,1509676497.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:57.525Z,1509676497.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:57.931Z,1509676497.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:58.331Z,1509676498.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:58.754Z,1509676498.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:59.127Z,1509676499.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:59.523Z,1509676499.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:34:59.929Z,1509676499.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:00.327Z,1509676500.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:00.735Z,1509676500.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:01.136Z,1509676501.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:01.541Z,1509676501.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:01.927Z,1509676501.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:02.311Z,1509676502.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:02.715Z,1509676502.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:03.114Z,1509676503.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:03.535Z,1509676503.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:03.939Z,1509676503.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:04.338Z,1509676504.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:04.766Z,1509676504.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:05.110Z,1509676505.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:05.562Z,1509676505.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:05.915Z,1509676505.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:06.314Z,1509676506.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:06.767Z,1509676506.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:07.128Z,1509676507.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:07.551Z,1509676507.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:07.923Z,1509676507.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:08.355Z,1509676508.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:08.719Z,1509676508.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:09.116Z,1509676509.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:09.519Z,1509676509.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:09.928Z,1509676509.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:10.328Z,1509676510.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:10.728Z,1509676510.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:11.123Z,1509676511.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:11.519Z,1509676511.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:11.919Z,1509676511.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:12.315Z,1509676512.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:12.745Z,1509676512.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:13.146Z,1509676513.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:13.545Z,1509676513.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:13.919Z,1509676513.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:14.316Z,1509676514.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:14.716Z,1509676514.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:15.120Z,1509676515.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:15.519Z,1509676515.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:15.945Z,1509676515.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:16.345Z,1509676516.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:16.725Z,1509676516.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:17.123Z,1509676517.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:17.518Z,1509676517.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:17.919Z,1509676517.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:18.327Z,1509676518.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:18.725Z,1509676518.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:19.179Z,1509676519.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:19.545Z,1509676519.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:19.923Z,1509676519.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:20.367Z,1509676520.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:20.717Z,1509676520.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:21.120Z,1509676521.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:21.519Z,1509676521.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:21.967Z,1509676521.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:22.324Z,1509676522.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:22.755Z,1509676522.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:23.154Z,1509676523.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:23.518Z,1509676523.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:23.919Z,1509676523.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:24.318Z,1509676524.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:24.721Z,1509676524.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:25.146Z,1509676525.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:25.545Z,1509676525.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:25.923Z,1509676525.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:26.318Z,1509676526.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:26.718Z,1509676526.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:27.118Z,1509676527.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:27.518Z,1509676527.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:27.945Z,1509676527.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:28.390Z,1509676528.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:28.726Z,1509676528.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:29.155Z,1509676529.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:29.517Z,1509676529.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:29.949Z,1509676529.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:30.355Z,1509676530.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:30.724Z,1509676530.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:31.149Z,1509676531.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:31.532Z,1509676531.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:31.923Z,1509676531.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:32.317Z,1509676532.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:32.718Z,1509676532.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:33.118Z,1509676533.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:33.514Z,1509676533.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:33.924Z,1509676533.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:34.324Z,1509676534.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:34.731Z,1509676534.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:35.123Z,1509676535.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:35.523Z,1509676535.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:35.975Z,1509676535.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:36.429Z,1509676536.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:36.724Z,1509676536.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:37.132Z,1509676537.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:37.524Z,1509676537.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:37.918Z,1509676537.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:38.318Z,1509676538.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:38.718Z,1509676538.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:39.119Z,1509676539.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:39.518Z,1509676539.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:39.924Z,1509676539.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:40.368Z,1509676540.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:40.731Z,1509676540.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:41.123Z,1509676541.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:41.518Z,1509676541.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:41.918Z,1509676541.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:42.319Z,1509676542.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:42.770Z,1509676542.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:43.131Z,1509676543.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:43.524Z,1509676543.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:43.951Z,1509676543.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:44.315Z,1509676544.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:44.758Z,1509676544.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:45.155Z,1509676545.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:45.521Z,1509676545.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:48.617Z,1509676548.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:48.801Z,1509676548.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:49.168Z,1509676549.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:49.559Z,1509676549.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:49.956Z,1509676549.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:50.352Z,1509676550.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:50.775Z,1509676550.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:51.174Z,1509676551.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:51.574Z,1509676551.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:51.969Z,1509676551.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:52.367Z,1509676552.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:52.778Z,1509676552.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:53.169Z,1509676553.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:53.605Z,1509676553.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:54.002Z,1509676554.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:54.383Z,1509676554.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:54.799Z,1509676554.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:55.202Z,1509676555.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:55.555Z,1509676555.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:56.018Z,1509676556.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:56.382Z,1509676556.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:56.783Z,1509676556.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:57.199Z,1509676557.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:57.645Z,1509676557.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:57.960Z,1509676557.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:58.399Z,1509676558.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:58.823Z,1509676558.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:59.213Z,1509676559.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:59.625Z,1509676559.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:35:59.978Z,1509676559.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:00.386Z,1509676560.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:00.791Z,1509676560.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:01.183Z,1509676561.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:01.560Z,1509676561.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:01.991Z,1509676561.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:02.354Z,1509676562.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:02.787Z,1509676562.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:03.189Z,1509676563.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:03.570Z,1509676563.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:03.963Z,1509676563.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:04.355Z,1509676564.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:04.758Z,1509676564.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:05.148Z,1509676565.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:05.555Z,1509676565.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:05.963Z,1509676565.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:06.371Z,1509676566.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:06.763Z,1509676566.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:07.157Z,1509676567.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:07.563Z,1509676567.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:07.958Z,1509676567.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:08.362Z,1509676568.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:08.767Z,1509676568.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:09.167Z,1509676569.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:09.563Z,1509676569.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:10.003Z,1509676570.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:10.354Z,1509676570.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:10.762Z,1509676570.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:11.163Z,1509676571.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:11.603Z,1509676571.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:11.967Z,1509676571.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:12.371Z,1509676572.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:12.799Z,1509676572.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:13.162Z,1509676573.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:13.579Z,1509676573.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:13.994Z,1509676573.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:14.354Z,1509676574.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:14.771Z,1509676574.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:15.171Z,1509676575.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:15.567Z,1509676575.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:15.963Z,1509676575.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:16.366Z,1509676576.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:16.757Z,1509676576.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:17.199Z,1509676577.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:17.554Z,1509676577.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:17.998Z,1509676577.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:18.359Z,1509676578.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:18.771Z,1509676578.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:19.158Z,1509676579.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:19.555Z,1509676579.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:19.955Z,1509676579.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:20.356Z,1509676580.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:20.764Z,1509676580.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:21.175Z,1509676581.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:21.568Z,1509676581.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:21.963Z,1509676581.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:22.356Z,1509676582.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:22.762Z,1509676582.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:23.183Z,1509676583.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:23.556Z,1509676583.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:24.007Z,1509676584.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:24.371Z,1509676584.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:24.768Z,1509676584.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:25.178Z,1509676585.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:25.551Z,1509676585.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:25.954Z,1509676585.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:26.388Z,1509676586.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:26.756Z,1509676586.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:27.160Z,1509676587.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:27.595Z,1509676587.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:27.955Z,1509676587.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:28.387Z,1509676588.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:28.754Z,1509676588.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:29.187Z,1509676589.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:29.559Z,1509676589.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:29.981Z,1509676589.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:30.356Z,1509676590.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:30.760Z,1509676590.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:31.152Z,1509676591.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:31.551Z,1509676591.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:31.955Z,1509676591.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:32.354Z,1509676592.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:32.781Z,1509676592.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:33.180Z,1509676593.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:33.559Z,1509676593.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:33.560Z,1509676593.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2017-11-03T02:36:33.560Z,1509676593.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:36:33.561Z,1509676593.561 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:33.562Z,1509676593.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2017-11-03T02:36:33.562Z,1509676593.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:36:33.563Z,1509676593.563 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:33.564Z,1509676593.564 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2017-11-03T02:36:33.564Z,1509676593.564 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:36:33.674Z,1509676593.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:36:33.674Z,1509676593.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:36:33.674Z,1509676593.674 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:36:34.032Z,1509676594.032 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:36:34.033Z,1509676594.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2017-11-03T02:36:34.033Z,1509676594.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:36:34.033Z,1509676594.033 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2017-11-03T02:36:34.034Z,1509676594.034 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:36:34.034Z,1509676594.034 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2017-11-03T02:36:34.403Z,1509676594.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:36:34.403Z,1509676594.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:36:34.404Z,1509676594.404 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:36:34.405Z,1509676594.405 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:36:34.405Z,1509676594.405 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:36:34.406Z,1509676594.406 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:36:34.406Z,1509676594.406 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:36:34.407Z,1509676594.407 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:36:34.408Z,1509676594.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:36:34.754Z,1509676594.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:36:34.755Z,1509676594.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:35.159Z,1509676595.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:36:35.160Z,1509676595.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:35.555Z,1509676595.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:36:35.556Z,1509676595.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:35.963Z,1509676595.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:36:35.965Z,1509676595.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:36.367Z,1509676596.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:36:36.368Z,1509676596.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:36.767Z,1509676596.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:36:36.768Z,1509676596.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:37.162Z,1509676597.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:36:37.163Z,1509676597.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:37.562Z,1509676597.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:36:37.563Z,1509676597.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:37.955Z,1509676597.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:36:37.956Z,1509676597.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:38.355Z,1509676598.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:36:38.356Z,1509676598.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:38.763Z,1509676598.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:36:38.764Z,1509676598.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:39.167Z,1509676599.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:36:39.168Z,1509676599.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:39.570Z,1509676599.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:36:39.571Z,1509676599.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:39.975Z,1509676599.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:36:39.975Z,1509676599.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:40.354Z,1509676600.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:36:40.355Z,1509676600.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:40.755Z,1509676600.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:36:40.756Z,1509676600.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:41.213Z,1509676601.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T02:36:41.214Z,1509676601.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:41.555Z,1509676601.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:36:41.556Z,1509676601.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:41.995Z,1509676601.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:36:41.996Z,1509676601.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:42.370Z,1509676602.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:36:42.371Z,1509676602.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:42.802Z,1509676602.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:36:42.803Z,1509676602.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:43.179Z,1509676603.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:36:43.180Z,1509676603.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:43.557Z,1509676603.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:36:43.558Z,1509676603.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:43.955Z,1509676603.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:36:43.956Z,1509676603.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:44.355Z,1509676604.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:36:44.356Z,1509676604.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:44.774Z,1509676604.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:36:44.775Z,1509676604.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:45.174Z,1509676605.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:36:45.175Z,1509676605.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:45.567Z,1509676605.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:36:45.569Z,1509676605.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:48.666Z,1509676608.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T02:36:48.667Z,1509676608.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:48.837Z,1509676608.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T02:36:48.838Z,1509676608.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:49.246Z,1509676609.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T02:36:49.247Z,1509676609.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:49.645Z,1509676609.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T02:36:49.646Z,1509676609.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:50.023Z,1509676610.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T02:36:50.024Z,1509676610.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:50.414Z,1509676610.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T02:36:50.415Z,1509676610.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:50.809Z,1509676610.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T02:36:50.810Z,1509676610.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:51.206Z,1509676611.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:36:51.207Z,1509676611.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:51.624Z,1509676611.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T02:36:51.625Z,1509676611.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:52.027Z,1509676612.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T02:36:52.028Z,1509676612.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:52.443Z,1509676612.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T02:36:52.445Z,1509676612.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:52.815Z,1509676612.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T02:36:52.816Z,1509676612.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:53.209Z,1509676613.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:36:53.210Z,1509676613.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:53.623Z,1509676613.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:54.067Z,1509676614.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:54.419Z,1509676614.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:54.809Z,1509676614.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:55.231Z,1509676615.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:55.616Z,1509676615.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:56.055Z,1509676616.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:56.426Z,1509676616.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:56.850Z,1509676616.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:57.248Z,1509676617.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:57.620Z,1509676617.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:58.026Z,1509676618.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:58.422Z,1509676618.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:58.831Z,1509676618.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:59.215Z,1509676619.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:36:59.623Z,1509676619.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:00.030Z,1509676620.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:00.445Z,1509676620.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:00.810Z,1509676620.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:01.213Z,1509676621.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:01.619Z,1509676621.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:02.045Z,1509676622.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:02.421Z,1509676622.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:02.810Z,1509676622.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:03.213Z,1509676623.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:03.627Z,1509676623.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:04.030Z,1509676624.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:04.423Z,1509676624.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:04.815Z,1509676624.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:05.215Z,1509676625.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:05.621Z,1509676625.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:06.027Z,1509676626.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:06.422Z,1509676626.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:06.827Z,1509676626.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:07.215Z,1509676627.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:07.623Z,1509676627.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:08.066Z,1509676628.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:08.446Z,1509676628.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:08.817Z,1509676628.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:09.251Z,1509676629.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:09.631Z,1509676629.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:10.049Z,1509676630.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:10.458Z,1509676630.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:10.813Z,1509676630.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:11.235Z,1509676631.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:11.659Z,1509676631.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:12.026Z,1509676632.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:12.423Z,1509676632.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:12.814Z,1509676632.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:13.211Z,1509676633.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:13.616Z,1509676633.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:14.030Z,1509676634.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:14.431Z,1509676634.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:14.832Z,1509676634.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:15.209Z,1509676635.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:15.621Z,1509676635.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:16.021Z,1509676636.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:16.447Z,1509676636.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:16.812Z,1509676636.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:17.218Z,1509676637.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:17.623Z,1509676637.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:18.050Z,1509676638.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:18.421Z,1509676638.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:18.809Z,1509676638.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:19.214Z,1509676639.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:19.619Z,1509676639.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:20.021Z,1509676640.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:20.421Z,1509676640.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:20.815Z,1509676640.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:21.208Z,1509676641.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:21.622Z,1509676641.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:22.027Z,1509676642.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:22.470Z,1509676642.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:22.826Z,1509676642.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:23.215Z,1509676643.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:23.678Z,1509676643.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:24.027Z,1509676644.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:24.463Z,1509676644.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:24.812Z,1509676644.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:25.235Z,1509676645.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:25.623Z,1509676645.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:26.059Z,1509676646.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:26.417Z,1509676646.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:26.815Z,1509676646.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:26.905Z,1509676646.905 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:37:26.905Z,1509676646.905 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T02:37:27.160Z,1509676647.160 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:37:27.161Z,1509676647.161 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:37:27.161Z,1509676647.161 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:37:27.161Z,1509676647.161 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:37:27.239Z,1509676647.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:27.633Z,1509676647.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:28.017Z,1509676648.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:28.425Z,1509676648.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:28.818Z,1509676648.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:29.218Z,1509676649.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:29.630Z,1509676649.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:30.023Z,1509676650.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:30.427Z,1509676650.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:30.823Z,1509676650.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:31.194Z,1509676651.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:31.354Z,1509676651.354 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:37:31.421Z,1509676651.421 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:37:31.422Z,1509676651.422 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:37:31.423Z,1509676651.423 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:37:31.423Z,1509676651.423 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:37:31.639Z,1509676651.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:32.034Z,1509676652.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:32.446Z,1509676652.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:32.804Z,1509676652.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:33.207Z,1509676653.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:33.637Z,1509676653.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:34.042Z,1509676654.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:34.413Z,1509676654.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:34.820Z,1509676654.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:35.212Z,1509676655.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:35.613Z,1509676655.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:36.012Z,1509676656.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:36.418Z,1509676656.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:36.851Z,1509676656.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:37.207Z,1509676657.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:37.615Z,1509676657.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:38.063Z,1509676658.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:38.430Z,1509676658.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:38.812Z,1509676658.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:39.250Z,1509676659.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:39.625Z,1509676659.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:40.059Z,1509676660.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:40.462Z,1509676660.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:40.813Z,1509676660.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:41.215Z,1509676661.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:41.624Z,1509676661.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:42.052Z,1509676662.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:42.416Z,1509676662.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:42.821Z,1509676662.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:43.215Z,1509676663.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:43.623Z,1509676663.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:44.033Z,1509676664.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:44.423Z,1509676664.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:44.820Z,1509676664.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:45.197Z,1509676665.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:45.627Z,1509676665.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:48.817Z,1509676668.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:48.982Z,1509676668.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:49.374Z,1509676669.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:49.780Z,1509676669.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:50.171Z,1509676670.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:50.571Z,1509676670.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:50.987Z,1509676670.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:51.427Z,1509676671.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:51.787Z,1509676671.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:52.175Z,1509676672.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:52.559Z,1509676672.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:52.999Z,1509676672.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:53.359Z,1509676673.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:53.799Z,1509676673.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:54.191Z,1509676674.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:54.624Z,1509676674.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:54.994Z,1509676674.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:55.354Z,1509676675.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:55.783Z,1509676675.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:56.160Z,1509676676.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:56.559Z,1509676676.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:57.004Z,1509676677.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:57.391Z,1509676677.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:57.784Z,1509676677.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:58.163Z,1509676678.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:58.582Z,1509676678.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:58.962Z,1509676678.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:59.367Z,1509676679.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:37:59.785Z,1509676679.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:00.203Z,1509676680.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:00.584Z,1509676680.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:00.987Z,1509676680.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:01.367Z,1509676681.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:01.763Z,1509676681.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:02.163Z,1509676682.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:02.562Z,1509676682.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:02.992Z,1509676682.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:03.376Z,1509676683.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:03.792Z,1509676683.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:04.167Z,1509676684.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:04.566Z,1509676684.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:04.968Z,1509676684.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:05.373Z,1509676685.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:05.773Z,1509676685.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:06.193Z,1509676686.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:06.572Z,1509676686.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:06.971Z,1509676686.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:07.411Z,1509676687.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:07.761Z,1509676687.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:08.199Z,1509676688.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:08.567Z,1509676688.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:09.003Z,1509676689.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:09.403Z,1509676689.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:09.769Z,1509676689.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:10.168Z,1509676690.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:10.567Z,1509676690.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:10.968Z,1509676690.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:11.369Z,1509676691.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:11.779Z,1509676691.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:12.180Z,1509676692.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:12.576Z,1509676692.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:12.967Z,1509676692.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:13.369Z,1509676693.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:13.769Z,1509676693.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:14.175Z,1509676694.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:14.570Z,1509676694.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:14.981Z,1509676694.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:15.383Z,1509676695.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:15.781Z,1509676695.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:16.173Z,1509676696.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:16.578Z,1509676696.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:16.974Z,1509676696.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:17.375Z,1509676697.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:17.781Z,1509676697.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:18.183Z,1509676698.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:18.581Z,1509676698.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:18.971Z,1509676698.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:19.373Z,1509676699.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:19.771Z,1509676699.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:20.175Z,1509676700.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:20.565Z,1509676700.565 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:38:20.565Z,1509676700.565 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:38:20.565Z,1509676700.565 [BPC1](ERROR): Data Fault
2017-11-03T02:38:20.581Z,1509676700.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:20.673Z,1509676700.673 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:38:20.981Z,1509676700.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:21.387Z,1509676701.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:21.779Z,1509676701.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:21.869Z,1509676701.869 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:38:21.869Z,1509676701.869 [BPC1] No Fault, FailCount= 1
2017-11-03T02:38:22.227Z,1509676702.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:22.594Z,1509676702.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:22.978Z,1509676702.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:23.375Z,1509676703.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:23.779Z,1509676703.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:24.191Z,1509676704.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:24.587Z,1509676704.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:25.026Z,1509676705.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:25.359Z,1509676705.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:25.755Z,1509676705.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:26.159Z,1509676706.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:26.557Z,1509676706.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:27.043Z,1509676707.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:27.387Z,1509676707.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:27.795Z,1509676707.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:28.155Z,1509676708.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:28.559Z,1509676708.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:28.959Z,1509676708.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:29.359Z,1509676709.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:29.787Z,1509676709.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:30.185Z,1509676710.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:30.587Z,1509676710.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:30.959Z,1509676710.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:31.383Z,1509676711.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:31.759Z,1509676711.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:32.159Z,1509676712.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:32.559Z,1509676712.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:32.987Z,1509676712.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:33.396Z,1509676713.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:33.779Z,1509676713.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:34.159Z,1509676714.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:34.611Z,1509676714.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:34.960Z,1509676714.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:35.403Z,1509676715.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:35.779Z,1509676715.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:36.215Z,1509676716.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:36.611Z,1509676716.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:36.957Z,1509676716.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:37.361Z,1509676717.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:37.773Z,1509676717.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:38.159Z,1509676718.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:38.559Z,1509676718.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:39.054Z,1509676719.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:39.381Z,1509676719.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:39.782Z,1509676719.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:40.155Z,1509676720.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:40.558Z,1509676720.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:40.959Z,1509676720.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:41.371Z,1509676721.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:41.772Z,1509676721.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:42.171Z,1509676722.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:42.572Z,1509676722.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:42.967Z,1509676722.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:43.373Z,1509676723.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:43.768Z,1509676723.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:44.167Z,1509676724.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:44.575Z,1509676724.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:44.981Z,1509676724.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:45.383Z,1509676725.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:45.781Z,1509676725.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:49.054Z,1509676729.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:49.215Z,1509676729.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:49.682Z,1509676729.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:50.024Z,1509676730.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:50.447Z,1509676730.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:50.839Z,1509676730.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:51.190Z,1509676731.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:51.674Z,1509676731.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:52.039Z,1509676732.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:52.423Z,1509676732.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:52.795Z,1509676732.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:53.194Z,1509676733.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:53.620Z,1509676733.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:54.040Z,1509676734.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:54.418Z,1509676734.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:54.795Z,1509676734.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:55.198Z,1509676735.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:55.618Z,1509676735.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:56.019Z,1509676736.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:56.426Z,1509676736.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:56.827Z,1509676736.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:57.195Z,1509676737.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:57.617Z,1509676737.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:58.022Z,1509676738.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:58.420Z,1509676738.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:58.818Z,1509676738.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:59.220Z,1509676739.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:38:59.622Z,1509676739.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:00.020Z,1509676740.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:00.419Z,1509676740.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:00.799Z,1509676740.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:01.199Z,1509676741.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:01.624Z,1509676741.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:02.033Z,1509676742.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:02.404Z,1509676742.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:02.850Z,1509676742.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:03.249Z,1509676743.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:03.650Z,1509676743.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:04.032Z,1509676744.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:04.403Z,1509676744.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:04.831Z,1509676744.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:05.227Z,1509676745.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:05.646Z,1509676745.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:06.031Z,1509676746.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:06.410Z,1509676746.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:06.807Z,1509676746.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:07.207Z,1509676747.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:07.605Z,1509676747.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:08.029Z,1509676748.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:08.404Z,1509676748.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:08.801Z,1509676748.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:09.203Z,1509676749.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:09.610Z,1509676749.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:10.005Z,1509676750.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:10.405Z,1509676750.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:10.802Z,1509676750.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:11.198Z,1509676751.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:11.605Z,1509676751.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:12.004Z,1509676752.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:12.404Z,1509676752.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:12.805Z,1509676752.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:13.201Z,1509676753.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:13.609Z,1509676753.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:14.008Z,1509676754.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:14.429Z,1509676754.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:14.801Z,1509676754.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:15.207Z,1509676755.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:15.608Z,1509676755.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:16.018Z,1509676756.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:16.446Z,1509676756.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:16.803Z,1509676756.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:17.238Z,1509676757.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:17.690Z,1509676757.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:18.047Z,1509676758.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:18.413Z,1509676758.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:18.846Z,1509676758.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:19.203Z,1509676759.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:19.694Z,1509676759.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:20.009Z,1509676760.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:20.447Z,1509676760.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:20.809Z,1509676760.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:21.201Z,1509676761.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:21.613Z,1509676761.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:22.018Z,1509676762.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:22.413Z,1509676762.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:22.800Z,1509676762.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:23.215Z,1509676763.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:23.609Z,1509676763.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:24.017Z,1509676764.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:24.411Z,1509676764.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:24.799Z,1509676764.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:25.208Z,1509676765.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:25.617Z,1509676765.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:26.007Z,1509676766.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:26.411Z,1509676766.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:26.801Z,1509676766.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:27.214Z,1509676767.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:27.612Z,1509676767.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:27.900Z,1509676767.900 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:39:27.900Z,1509676767.900 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T02:39:27.900Z,1509676767.900 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:39:28.010Z,1509676768.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:39:28.011Z,1509676768.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:28.089Z,1509676768.089 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:39:28.304Z,1509676768.304 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:39:28.455Z,1509676768.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:39:28.465Z,1509676768.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:28.474Z,1509676768.474 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:39:28.803Z,1509676768.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:39:28.805Z,1509676768.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:29.202Z,1509676769.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:39:29.203Z,1509676769.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:29.612Z,1509676769.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:39:29.613Z,1509676769.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:29.693Z,1509676769.693 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:39:29.693Z,1509676769.693 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T02:39:30.013Z,1509676770.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:39:30.015Z,1509676770.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:30.089Z,1509676770.089 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:39:30.089Z,1509676770.089 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:39:30.089Z,1509676770.089 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:39:30.090Z,1509676770.090 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:39:30.416Z,1509676770.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:39:30.417Z,1509676770.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:30.810Z,1509676770.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:39:30.811Z,1509676770.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:31.202Z,1509676771.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:39:31.203Z,1509676771.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:31.615Z,1509676771.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:39:31.617Z,1509676771.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:32.018Z,1509676772.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:39:32.019Z,1509676772.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:32.482Z,1509676772.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T02:39:32.482Z,1509676772.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:32.813Z,1509676772.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:39:32.814Z,1509676772.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:33.207Z,1509676773.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:39:33.208Z,1509676773.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:33.653Z,1509676773.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:39:33.654Z,1509676773.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:34.012Z,1509676774.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:39:34.013Z,1509676774.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:34.215Z,1509676774.215 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:39:34.268Z,1509676774.268 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:39:34.269Z,1509676774.269 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:39:34.270Z,1509676774.270 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:39:34.270Z,1509676774.270 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:39:34.453Z,1509676774.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:39:34.454Z,1509676774.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:34.454Z,1509676774.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2017-11-03T02:39:34.454Z,1509676774.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:39:34.456Z,1509676774.456 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:34.456Z,1509676774.456 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2017-11-03T02:39:34.457Z,1509676774.457 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:39:34.459Z,1509676774.459 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:34.459Z,1509676774.459 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2017-11-03T02:39:34.459Z,1509676774.459 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:39:34.545Z,1509676774.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:39:34.546Z,1509676774.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:39:34.546Z,1509676774.546 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:39:34.966Z,1509676774.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:39:34.966Z,1509676774.966 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2017-11-03T02:39:34.967Z,1509676774.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:39:34.967Z,1509676774.967 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2017-11-03T02:39:34.967Z,1509676774.967 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:39:34.968Z,1509676774.968 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2017-11-03T02:39:35.240Z,1509676775.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:39:35.245Z,1509676775.245 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:39:35.246Z,1509676775.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:39:35.247Z,1509676775.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:39:35.247Z,1509676775.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:39:35.248Z,1509676775.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:39:35.248Z,1509676775.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:39:35.248Z,1509676775.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:39:35.249Z,1509676775.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:39:35.627Z,1509676775.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:36.012Z,1509676776.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:36.418Z,1509676776.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:36.809Z,1509676776.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:37.208Z,1509676777.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:37.613Z,1509676777.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:38.059Z,1509676778.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:38.435Z,1509676778.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:38.811Z,1509676778.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:39.208Z,1509676779.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:39.615Z,1509676779.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:40.072Z,1509676780.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:40.422Z,1509676780.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:40.795Z,1509676780.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:41.203Z,1509676781.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:41.603Z,1509676781.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:42.070Z,1509676782.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:42.405Z,1509676782.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:42.799Z,1509676782.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:43.211Z,1509676783.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:43.629Z,1509676783.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:44.081Z,1509676784.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:44.428Z,1509676784.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:44.804Z,1509676784.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:45.201Z,1509676785.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:45.204Z,1509676785.204 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T02:39:45.204Z,1509676785.204 [Default:CheckIn:C.Wait] Stopped
2017-11-03T02:39:45.204Z,1509676785.204 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T02:39:45.205Z,1509676785.205 [Default:CheckIn:D] Running Loop=1
2017-11-03T02:39:45.608Z,1509676785.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:45.612Z,1509676785.612 [Default:CheckIn:D] Stopped
2017-11-03T02:39:45.612Z,1509676785.612 [Default:CheckIn:E] Running Loop=1
2017-11-03T02:39:46.033Z,1509676786.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:46.040Z,1509676786.040 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.634082 min 
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn:E] Stopped
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn] Stopped
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn](INFO): Running loop #15
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn] Running Loop=15
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T02:39:46.041Z,1509676786.041 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T02:39:49.255Z,1509676789.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:49.407Z,1509676789.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:49.839Z,1509676789.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:50.203Z,1509676790.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:50.679Z,1509676790.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:51.036Z,1509676791.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:51.401Z,1509676791.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:51.796Z,1509676791.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:52.195Z,1509676792.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:52.645Z,1509676792.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:53.023Z,1509676793.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:53.419Z,1509676793.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:53.795Z,1509676793.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:54.199Z,1509676794.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:54.622Z,1509676794.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:55.001Z,1509676795.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:55.422Z,1509676795.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:55.800Z,1509676795.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:56.195Z,1509676796.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:56.622Z,1509676796.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:57.022Z,1509676797.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:57.421Z,1509676797.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:57.795Z,1509676797.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:58.223Z,1509676798.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:58.621Z,1509676798.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:59.022Z,1509676799.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:59.419Z,1509676799.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:39:59.803Z,1509676799.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:00.199Z,1509676800.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:00.624Z,1509676800.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:01.021Z,1509676801.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:01.422Z,1509676801.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:01.803Z,1509676801.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:02.189Z,1509676802.189 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:40:02.189Z,1509676802.189 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:40:02.189Z,1509676802.189 [BPC1](ERROR): Data Fault
2017-11-03T02:40:02.197Z,1509676802.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:02.305Z,1509676802.305 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:40:02.610Z,1509676802.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:03.004Z,1509676803.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:03.404Z,1509676803.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:03.485Z,1509676803.485 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:40:03.485Z,1509676803.485 [BPC1] No Fault, FailCount= 1
2017-11-03T02:40:03.855Z,1509676803.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:04.202Z,1509676804.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:04.687Z,1509676804.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:05.009Z,1509676805.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:05.411Z,1509676805.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:05.803Z,1509676805.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:06.201Z,1509676806.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:06.681Z,1509676806.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:07.008Z,1509676807.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:07.411Z,1509676807.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:07.803Z,1509676807.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:08.199Z,1509676808.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:08.611Z,1509676808.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:09.009Z,1509676809.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:09.403Z,1509676809.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:09.801Z,1509676809.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:10.208Z,1509676810.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:10.603Z,1509676810.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:11.004Z,1509676811.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:11.403Z,1509676811.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:11.831Z,1509676811.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:12.203Z,1509676812.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:12.604Z,1509676812.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:13.003Z,1509676813.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:13.405Z,1509676813.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:13.802Z,1509676813.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:14.197Z,1509676814.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:14.611Z,1509676814.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:15.014Z,1509676815.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:15.405Z,1509676815.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:15.801Z,1509676815.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:16.202Z,1509676816.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:16.639Z,1509676816.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:17.038Z,1509676817.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:17.415Z,1509676817.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:17.834Z,1509676817.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:18.217Z,1509676818.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:18.679Z,1509676818.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:19.046Z,1509676819.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:19.413Z,1509676819.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:19.819Z,1509676819.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:20.191Z,1509676820.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:20.646Z,1509676820.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:21.018Z,1509676821.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:21.412Z,1509676821.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:21.795Z,1509676821.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:22.217Z,1509676822.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:22.613Z,1509676822.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:23.013Z,1509676823.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:23.419Z,1509676823.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:23.791Z,1509676823.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:24.211Z,1509676824.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:24.613Z,1509676824.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:25.012Z,1509676825.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:25.423Z,1509676825.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:25.791Z,1509676825.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:26.212Z,1509676826.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:26.613Z,1509676826.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:27.018Z,1509676827.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:27.412Z,1509676827.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:27.791Z,1509676827.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:28.219Z,1509676828.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:28.627Z,1509676828.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:29.012Z,1509676829.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:29.420Z,1509676829.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:29.795Z,1509676829.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:30.213Z,1509676830.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:30.603Z,1509676830.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:31.066Z,1509676831.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:31.415Z,1509676831.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:31.835Z,1509676831.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:32.203Z,1509676832.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:32.671Z,1509676832.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:33.043Z,1509676833.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:33.411Z,1509676833.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:33.803Z,1509676833.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:34.201Z,1509676834.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:34.659Z,1509676834.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:35.011Z,1509676835.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:35.412Z,1509676835.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:35.802Z,1509676835.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:36.198Z,1509676836.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:36.617Z,1509676836.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:37.019Z,1509676837.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:37.415Z,1509676837.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:37.802Z,1509676837.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:38.209Z,1509676838.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:38.612Z,1509676838.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:39.011Z,1509676839.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:39.415Z,1509676839.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:39.802Z,1509676839.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:40.211Z,1509676840.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:40.611Z,1509676840.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:41.015Z,1509676841.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:41.418Z,1509676841.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:41.807Z,1509676841.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:42.198Z,1509676842.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:42.612Z,1509676842.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:43.016Z,1509676843.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:43.419Z,1509676843.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:43.804Z,1509676843.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:44.201Z,1509676844.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:44.620Z,1509676844.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:45.039Z,1509676845.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:45.439Z,1509676845.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:45.815Z,1509676845.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:46.215Z,1509676846.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:49.486Z,1509676849.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:49.675Z,1509676849.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:50.111Z,1509676850.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:50.486Z,1509676850.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:50.862Z,1509676850.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:51.247Z,1509676851.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:51.667Z,1509676851.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:52.118Z,1509676852.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:52.505Z,1509676852.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:52.872Z,1509676852.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:53.264Z,1509676853.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:53.675Z,1509676853.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:54.128Z,1509676854.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:54.469Z,1509676854.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:54.868Z,1509676854.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:55.274Z,1509676855.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:55.662Z,1509676855.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:56.167Z,1509676856.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:56.516Z,1509676856.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:56.873Z,1509676856.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:57.294Z,1509676857.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:57.675Z,1509676857.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:58.079Z,1509676858.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:58.482Z,1509676858.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:58.870Z,1509676858.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:59.283Z,1509676859.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:40:59.678Z,1509676859.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:00.071Z,1509676860.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:00.506Z,1509676860.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:00.876Z,1509676860.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:01.279Z,1509676861.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:01.682Z,1509676861.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:02.075Z,1509676862.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:02.435Z,1509676862.435 [PNI_TCM](ERROR): CRC does not match. Expected:0x35644 got:0x7106
2017-11-03T02:41:02.482Z,1509676862.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:02.939Z,1509676862.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:03.290Z,1509676863.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:03.687Z,1509676863.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:04.130Z,1509676864.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:04.479Z,1509676864.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:04.883Z,1509676864.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:05.250Z,1509676865.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:05.655Z,1509676865.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:06.088Z,1509676866.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:06.447Z,1509676866.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:06.854Z,1509676866.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:07.263Z,1509676867.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:07.653Z,1509676867.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:08.111Z,1509676868.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:08.451Z,1509676868.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:08.852Z,1509676868.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:09.251Z,1509676869.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:09.655Z,1509676869.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:10.127Z,1509676870.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:10.455Z,1509676870.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:10.847Z,1509676870.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:11.250Z,1509676871.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:11.649Z,1509676871.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:12.053Z,1509676872.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:12.457Z,1509676872.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:12.856Z,1509676872.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:13.258Z,1509676873.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:13.659Z,1509676873.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:14.054Z,1509676874.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:14.455Z,1509676874.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:14.863Z,1509676874.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:15.261Z,1509676875.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:15.663Z,1509676875.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:16.057Z,1509676876.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:16.487Z,1509676876.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:16.883Z,1509676876.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:17.247Z,1509676877.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:17.641Z,1509676877.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:18.099Z,1509676878.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:18.442Z,1509676878.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:18.890Z,1509676878.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:19.283Z,1509676879.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:19.655Z,1509676879.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:20.105Z,1509676880.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:20.447Z,1509676880.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:20.847Z,1509676880.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:21.255Z,1509676881.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:21.647Z,1509676881.647 [PNI_TCM](ERROR): CRC does not match. Expected:0x27502 got:0x16384
2017-11-03T02:41:21.674Z,1509676881.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:22.095Z,1509676882.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:22.452Z,1509676882.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:22.851Z,1509676882.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:23.257Z,1509676883.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:23.639Z,1509676883.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:24.091Z,1509676884.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:24.540Z,1509676884.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:24.874Z,1509676884.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:25.270Z,1509676885.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:25.671Z,1509676885.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:26.051Z,1509676886.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:26.441Z,1509676886.441 [PNI_TCM](ERROR): CRC does not match. Expected:0x31215 got:0x6210
2017-11-03T02:41:26.483Z,1509676886.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:26.847Z,1509676886.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:27.242Z,1509676887.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:27.670Z,1509676887.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:28.068Z,1509676888.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:28.471Z,1509676888.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:28.847Z,1509676888.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:29.257Z,1509676889.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:29.652Z,1509676889.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:30.053Z,1509676890.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:30.196Z,1509676890.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:41:30.196Z,1509676890.196 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T02:41:30.196Z,1509676890.196 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:41:30.454Z,1509676890.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:41:30.455Z,1509676890.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:30.547Z,1509676890.547 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:41:30.601Z,1509676890.601 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:41:30.690Z,1509676890.690 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:41:30.866Z,1509676890.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:41:30.867Z,1509676890.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:31.314Z,1509676891.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-03T02:41:31.315Z,1509676891.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:31.713Z,1509676891.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-03T02:41:31.714Z,1509676891.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:32.051Z,1509676892.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:41:32.052Z,1509676892.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:32.157Z,1509676892.157 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:41:32.157Z,1509676892.157 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T02:41:32.304Z,1509676892.304 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:41:32.305Z,1509676892.305 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:41:32.305Z,1509676892.305 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:41:32.305Z,1509676892.305 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:41:32.494Z,1509676892.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:41:32.495Z,1509676892.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:32.862Z,1509676892.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:41:32.863Z,1509676892.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:33.275Z,1509676893.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:41:33.276Z,1509676893.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:33.698Z,1509676893.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:41:33.699Z,1509676893.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:34.063Z,1509676894.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:41:34.064Z,1509676894.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:34.466Z,1509676894.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:41:34.467Z,1509676894.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:34.850Z,1509676894.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:41:34.851Z,1509676894.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:35.249Z,1509676895.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:41:35.250Z,1509676895.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:35.655Z,1509676895.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:41:35.656Z,1509676895.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:36.055Z,1509676896.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:41:36.056Z,1509676896.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:36.467Z,1509676896.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:41:36.468Z,1509676896.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:36.531Z,1509676896.531 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:41:36.623Z,1509676896.623 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:41:36.624Z,1509676896.624 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:41:36.625Z,1509676896.625 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:41:36.625Z,1509676896.625 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:41:36.881Z,1509676896.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:41:36.882Z,1509676896.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:37.287Z,1509676897.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:37.653Z,1509676897.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:38.047Z,1509676898.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:38.449Z,1509676898.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:38.852Z,1509676898.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:39.253Z,1509676899.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:39.653Z,1509676899.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:40.131Z,1509676900.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:40.455Z,1509676900.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:40.851Z,1509676900.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:41.255Z,1509676901.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:41.646Z,1509676901.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:42.099Z,1509676902.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:42.453Z,1509676902.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:42.856Z,1509676902.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:43.256Z,1509676903.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:43.345Z,1509676903.345 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T02:41:43.345Z,1509676903.345 [DropWeight] No Fault, FailCount= 1
2017-11-03T02:41:43.345Z,1509676903.345 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T02:41:43.663Z,1509676903.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:44.103Z,1509676904.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:44.452Z,1509676904.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:44.849Z,1509676904.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:45.258Z,1509676905.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:45.730Z,1509676905.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:46.106Z,1509676906.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:46.499Z,1509676906.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:49.648Z,1509676909.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:49.839Z,1509676909.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:50.288Z,1509676910.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:50.607Z,1509676910.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:51.011Z,1509676911.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:51.409Z,1509676911.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:51.807Z,1509676911.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:52.183Z,1509676912.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:52.638Z,1509676912.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:53.011Z,1509676913.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:53.407Z,1509676913.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:53.785Z,1509676913.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:54.184Z,1509676914.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:54.638Z,1509676914.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:55.007Z,1509676915.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:55.411Z,1509676915.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:55.785Z,1509676915.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:56.208Z,1509676916.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:56.610Z,1509676916.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:57.011Z,1509676917.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:57.419Z,1509676917.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:57.813Z,1509676917.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:58.210Z,1509676918.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:58.612Z,1509676918.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:59.012Z,1509676919.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:59.411Z,1509676919.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:41:59.785Z,1509676919.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:00.211Z,1509676920.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:00.615Z,1509676920.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:01.015Z,1509676921.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:01.477Z,1509676921.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:01.788Z,1509676921.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:02.275Z,1509676922.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:02.593Z,1509676922.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:03.031Z,1509676923.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:03.415Z,1509676923.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:03.819Z,1509676923.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:04.223Z,1509676924.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:04.597Z,1509676924.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:04.993Z,1509676924.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:05.396Z,1509676925.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:05.794Z,1509676925.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:06.191Z,1509676926.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:06.646Z,1509676926.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:07.021Z,1509676927.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:07.393Z,1509676927.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:07.791Z,1509676927.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:08.192Z,1509676928.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:08.642Z,1509676928.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:09.003Z,1509676929.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:09.397Z,1509676929.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:09.792Z,1509676929.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:10.194Z,1509676930.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:10.597Z,1509676930.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:11.004Z,1509676931.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:11.402Z,1509676931.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:11.798Z,1509676931.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:12.196Z,1509676932.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:12.623Z,1509676932.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:13.020Z,1509676933.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:13.392Z,1509676933.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:13.792Z,1509676933.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:14.199Z,1509676934.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:14.621Z,1509676934.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:14.996Z,1509676934.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:15.398Z,1509676935.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:15.793Z,1509676935.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:16.238Z,1509676936.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:16.650Z,1509676936.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:17.015Z,1509676937.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:17.434Z,1509676937.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:17.795Z,1509676937.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:18.281Z,1509676938.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:18.605Z,1509676938.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:19.046Z,1509676939.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:19.407Z,1509676939.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:19.800Z,1509676939.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:20.183Z,1509676940.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:20.650Z,1509676940.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:21.015Z,1509676941.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:21.409Z,1509676941.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:21.811Z,1509676941.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:22.182Z,1509676942.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:22.638Z,1509676942.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:23.010Z,1509676943.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:23.410Z,1509676943.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:23.784Z,1509676943.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:24.186Z,1509676944.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:24.615Z,1509676944.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:25.019Z,1509676945.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:25.415Z,1509676945.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:25.787Z,1509676945.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:26.195Z,1509676946.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:26.615Z,1509676946.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:27.015Z,1509676947.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:27.417Z,1509676947.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:27.787Z,1509676947.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:28.215Z,1509676948.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:28.616Z,1509676948.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:29.014Z,1509676949.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:29.415Z,1509676949.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:29.789Z,1509676949.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:30.191Z,1509676950.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:30.615Z,1509676950.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:31.078Z,1509676951.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:31.416Z,1509676951.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:31.823Z,1509676951.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:32.191Z,1509676952.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:32.631Z,1509676952.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:33.035Z,1509676953.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:33.411Z,1509676953.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:33.799Z,1509676953.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:34.191Z,1509676954.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:34.630Z,1509676954.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:34.999Z,1509676954.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:35.404Z,1509676955.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:35.404Z,1509676955.404 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2017-11-03T02:42:35.404Z,1509676955.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:42:35.406Z,1509676955.406 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:35.406Z,1509676955.406 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2017-11-03T02:42:35.406Z,1509676955.406 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:42:35.408Z,1509676955.408 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:35.408Z,1509676955.408 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2017-11-03T02:42:35.408Z,1509676955.408 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:42:35.481Z,1509676955.481 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:42:35.481Z,1509676955.481 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:42:35.481Z,1509676955.481 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:42:35.880Z,1509676955.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:42:35.881Z,1509676955.881 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2017-11-03T02:42:35.881Z,1509676955.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:42:35.881Z,1509676955.881 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2017-11-03T02:42:35.882Z,1509676955.882 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:42:35.882Z,1509676955.882 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2017-11-03T02:42:36.198Z,1509676956.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:42:36.198Z,1509676956.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:42:36.199Z,1509676956.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:42:36.199Z,1509676956.199 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:42:36.199Z,1509676956.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:42:36.200Z,1509676956.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:42:36.200Z,1509676956.200 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:42:36.201Z,1509676956.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:42:36.201Z,1509676956.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:42:36.657Z,1509676956.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:37.002Z,1509676957.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:37.404Z,1509676957.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:37.795Z,1509676957.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:38.195Z,1509676958.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:38.615Z,1509676958.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:39.006Z,1509676959.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:39.404Z,1509676959.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:39.801Z,1509676959.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:40.202Z,1509676960.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:40.615Z,1509676960.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:41.015Z,1509676961.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:41.405Z,1509676961.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:41.803Z,1509676961.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:42.201Z,1509676962.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:42.604Z,1509676962.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:43.015Z,1509676963.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:43.405Z,1509676963.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:43.802Z,1509676963.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:44.202Z,1509676964.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:44.610Z,1509676964.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:45.014Z,1509676965.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:45.423Z,1509676965.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:45.797Z,1509676965.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:46.205Z,1509676966.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:46.597Z,1509676966.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:49.798Z,1509676969.798 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:42:49.798Z,1509676969.798 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:42:49.798Z,1509676969.798 [BPC1](ERROR): Communications Fault
2017-11-03T02:42:49.831Z,1509676969.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:49.909Z,1509676969.909 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:42:50.012Z,1509676970.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:50.371Z,1509676970.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:50.771Z,1509676970.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:50.868Z,1509676970.868 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:42:50.869Z,1509676970.869 [BPC1] No Fault, FailCount= 1
2017-11-03T02:42:51.228Z,1509676971.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:51.573Z,1509676971.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:52.041Z,1509676972.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:52.414Z,1509676972.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:52.781Z,1509676972.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:53.179Z,1509676973.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:53.578Z,1509676973.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:53.973Z,1509676973.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:54.371Z,1509676974.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:54.791Z,1509676974.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:55.189Z,1509676975.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:55.569Z,1509676975.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:55.961Z,1509676975.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:56.377Z,1509676976.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:56.763Z,1509676976.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:57.167Z,1509676977.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:57.563Z,1509676977.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:57.979Z,1509676977.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:58.384Z,1509676978.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:58.786Z,1509676978.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:59.175Z,1509676979.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:59.574Z,1509676979.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:42:59.974Z,1509676979.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:00.371Z,1509676980.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:00.780Z,1509676980.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:01.177Z,1509676981.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:01.587Z,1509676981.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:01.968Z,1509676981.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:02.371Z,1509676982.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:02.768Z,1509676982.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:03.211Z,1509676983.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:03.570Z,1509676983.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:03.979Z,1509676983.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:04.386Z,1509676984.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:04.830Z,1509676984.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:05.175Z,1509676985.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:05.598Z,1509676985.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:06.042Z,1509676986.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:06.371Z,1509676986.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:06.780Z,1509676986.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:07.176Z,1509676987.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:07.580Z,1509676987.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:08.021Z,1509676988.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:08.377Z,1509676988.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:08.783Z,1509676988.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:09.166Z,1509676989.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:09.558Z,1509676989.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:10.010Z,1509676990.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:10.390Z,1509676990.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:10.789Z,1509676990.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:11.158Z,1509676991.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:11.565Z,1509676991.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:11.958Z,1509676991.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:12.367Z,1509676992.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:12.791Z,1509676992.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:13.191Z,1509676993.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:13.576Z,1509676993.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:13.966Z,1509676993.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:14.370Z,1509676994.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:14.764Z,1509676994.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:15.163Z,1509676995.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:15.567Z,1509676995.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:15.993Z,1509676995.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:16.376Z,1509676996.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:16.844Z,1509676996.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:17.167Z,1509676997.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:17.567Z,1509676997.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:18.018Z,1509676998.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:18.367Z,1509676998.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:18.793Z,1509676998.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:19.214Z,1509676999.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:19.576Z,1509676999.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:20.044Z,1509677000.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:20.363Z,1509677000.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:20.810Z,1509677000.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:21.170Z,1509677001.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:21.570Z,1509677001.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:22.025Z,1509677002.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:22.384Z,1509677002.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:22.785Z,1509677002.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:23.172Z,1509677003.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:23.575Z,1509677003.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:23.974Z,1509677003.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:24.383Z,1509677004.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:24.787Z,1509677004.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:25.181Z,1509677005.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:25.587Z,1509677005.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:25.959Z,1509677005.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:26.379Z,1509677006.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:26.759Z,1509677006.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:27.160Z,1509677007.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:27.585Z,1509677007.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:27.980Z,1509677007.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:28.399Z,1509677008.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:28.794Z,1509677008.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:29.183Z,1509677009.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:29.563Z,1509677009.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:29.983Z,1509677009.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:30.367Z,1509677010.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:30.795Z,1509677010.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:31.187Z,1509677011.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:31.585Z,1509677011.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:32.012Z,1509677012.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:32.403Z,1509677012.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:32.590Z,1509677012.590 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:43:32.590Z,1509677012.590 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T02:43:32.590Z,1509677012.590 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:43:32.770Z,1509677012.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:43:32.771Z,1509677012.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:32.865Z,1509677012.865 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:43:32.992Z,1509677012.992 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:43:33.080Z,1509677013.080 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:43:33.170Z,1509677013.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:43:33.171Z,1509677013.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:33.600Z,1509677013.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:43:33.602Z,1509677013.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:33.975Z,1509677013.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:43:33.976Z,1509677013.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:34.407Z,1509677014.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:43:34.408Z,1509677014.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:34.501Z,1509677014.501 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:43:34.501Z,1509677014.501 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T02:43:34.696Z,1509677014.696 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:43:34.697Z,1509677014.697 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:43:34.697Z,1509677014.697 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:43:34.697Z,1509677014.697 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:43:34.820Z,1509677014.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:43:34.821Z,1509677014.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:35.175Z,1509677015.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:43:35.176Z,1509677015.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:35.570Z,1509677015.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:43:35.570Z,1509677015.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:35.968Z,1509677015.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:43:35.969Z,1509677015.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:36.367Z,1509677016.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:43:36.368Z,1509677016.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:36.782Z,1509677016.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:43:36.783Z,1509677016.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:37.182Z,1509677017.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:43:37.183Z,1509677017.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:37.575Z,1509677017.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:43:37.576Z,1509677017.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:37.967Z,1509677017.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:43:37.969Z,1509677017.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:38.370Z,1509677018.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:43:38.371Z,1509677018.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:38.834Z,1509677018.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:43:38.836Z,1509677018.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:38.958Z,1509677018.958 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:43:39.019Z,1509677019.019 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:43:39.021Z,1509677019.021 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:43:39.021Z,1509677019.021 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:43:39.022Z,1509677019.022 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:43:39.200Z,1509677019.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:43:39.205Z,1509677019.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:39.611Z,1509677019.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:40.015Z,1509677020.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:40.381Z,1509677020.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:40.791Z,1509677020.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:41.172Z,1509677021.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:41.572Z,1509677021.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:41.975Z,1509677021.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:42.379Z,1509677022.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:42.791Z,1509677022.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:43.186Z,1509677023.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:43.591Z,1509677023.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:43.975Z,1509677023.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:44.374Z,1509677024.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:44.772Z,1509677024.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:45.209Z,1509677025.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:45.571Z,1509677025.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:45.983Z,1509677025.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:46.382Z,1509677026.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:46.790Z,1509677026.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:49.990Z,1509677029.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:50.153Z,1509677030.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:50.553Z,1509677030.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:50.953Z,1509677030.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:51.394Z,1509677031.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:51.786Z,1509677031.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:52.179Z,1509677032.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:52.579Z,1509677032.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:52.953Z,1509677032.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:53.353Z,1509677033.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:53.756Z,1509677033.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:54.151Z,1509677034.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:54.545Z,1509677034.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:54.949Z,1509677034.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:55.351Z,1509677035.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:55.753Z,1509677035.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:56.153Z,1509677036.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:56.556Z,1509677036.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:56.955Z,1509677036.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:57.347Z,1509677037.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:57.748Z,1509677037.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:58.149Z,1509677038.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:58.550Z,1509677038.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:58.954Z,1509677038.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:59.365Z,1509677039.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:43:59.762Z,1509677039.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:00.152Z,1509677040.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:00.551Z,1509677040.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:00.952Z,1509677040.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:01.361Z,1509677041.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:01.752Z,1509677041.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:02.156Z,1509677042.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:02.556Z,1509677042.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:03.033Z,1509677043.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:03.355Z,1509677043.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:03.751Z,1509677043.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:04.152Z,1509677044.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:04.599Z,1509677044.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:04.967Z,1509677044.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:05.395Z,1509677045.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:05.761Z,1509677045.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:06.179Z,1509677046.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:06.567Z,1509677046.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:06.950Z,1509677046.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:07.363Z,1509677047.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:07.766Z,1509677047.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:08.164Z,1509677048.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:08.567Z,1509677048.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:08.952Z,1509677048.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:09.358Z,1509677049.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:09.754Z,1509677049.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:10.157Z,1509677050.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:10.557Z,1509677050.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:10.961Z,1509677050.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:11.364Z,1509677051.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:11.763Z,1509677051.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:12.161Z,1509677052.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:12.558Z,1509677052.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:12.941Z,1509677052.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:13.350Z,1509677053.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:13.776Z,1509677053.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:14.177Z,1509677054.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:14.560Z,1509677054.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:14.947Z,1509677054.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:15.355Z,1509677055.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:15.752Z,1509677055.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:16.152Z,1509677056.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:16.551Z,1509677056.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:16.966Z,1509677056.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:17.387Z,1509677057.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:17.763Z,1509677057.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:18.142Z,1509677058.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:18.571Z,1509677058.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:18.943Z,1509677058.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:19.387Z,1509677059.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:19.767Z,1509677059.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:20.199Z,1509677060.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:20.591Z,1509677060.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:20.941Z,1509677060.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:21.371Z,1509677061.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:21.745Z,1509677061.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:22.191Z,1509677062.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:22.540Z,1509677062.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:22.967Z,1509677062.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:23.367Z,1509677063.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:23.770Z,1509677063.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:24.144Z,1509677064.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:24.540Z,1509677064.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:24.947Z,1509677064.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:25.342Z,1509677065.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:25.775Z,1509677065.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:26.168Z,1509677066.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:26.569Z,1509677066.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:26.940Z,1509677066.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:27.351Z,1509677067.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:27.749Z,1509677067.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:28.148Z,1509677068.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:28.548Z,1509677068.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:28.953Z,1509677068.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:29.363Z,1509677069.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:29.767Z,1509677069.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:30.152Z,1509677070.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:30.555Z,1509677070.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:30.949Z,1509677070.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:31.379Z,1509677071.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:31.760Z,1509677071.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:32.166Z,1509677072.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:32.603Z,1509677072.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:32.936Z,1509677072.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:33.379Z,1509677073.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:33.757Z,1509677073.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:34.183Z,1509677074.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:34.566Z,1509677074.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:34.964Z,1509677074.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:35.369Z,1509677075.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:35.770Z,1509677075.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:36.167Z,1509677076.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:36.543Z,1509677076.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:36.960Z,1509677076.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:37.353Z,1509677077.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:37.758Z,1509677077.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:38.168Z,1509677078.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:38.570Z,1509677078.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:38.939Z,1509677078.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:39.338Z,1509677079.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:39.744Z,1509677079.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:40.140Z,1509677080.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:40.538Z,1509677080.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:40.907Z,1509677080.907 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T02:44:40.907Z,1509677080.907 [NAL9602] Data Fault, FailCount= 4
2017-11-03T02:44:40.907Z,1509677080.907 [NAL9602](ERROR): Data Fault
2017-11-03T02:44:40.940Z,1509677080.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:41.065Z,1509677081.065 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T02:44:41.306Z,1509677081.306 [NAL9602](INFO): Powering down
2017-11-03T02:44:41.355Z,1509677081.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:41.756Z,1509677081.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:42.156Z,1509677082.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:42.252Z,1509677082.252 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T02:44:42.253Z,1509677082.253 [NAL9602] No Fault, FailCount= 4
2017-11-03T02:44:42.560Z,1509677082.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:42.962Z,1509677082.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:43.343Z,1509677083.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:43.739Z,1509677083.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:44.138Z,1509677084.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:44.539Z,1509677084.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:44.946Z,1509677084.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:45.386Z,1509677085.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:45.743Z,1509677085.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:46.147Z,1509677086.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:46.150Z,1509677086.150 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T02:39:46.0Z
2017-11-03T02:44:46.150Z,1509677086.150 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T02:44:46.150Z,1509677086.150 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T02:44:46.579Z,1509677086.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:47.122Z,1509677087.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:50.159Z,1509677090.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:50.296Z,1509677090.296 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0060.lzma
2017-11-03T02:44:50.369Z,1509677090.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:50.774Z,1509677090.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:51.083Z,1509677091.083 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0060.lzma.bak
2017-11-03T02:44:51.083Z,1509677091.083 [DataOverHttps](INFO): SBD MOMSN=5182515
2017-11-03T02:44:51.167Z,1509677091.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:51.815Z,1509677091.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:51.953Z,1509677091.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:55.206Z,1509677095.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:55.359Z,1509677095.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:55.757Z,1509677095.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:56.153Z,1509677096.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:56.555Z,1509677096.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:44:56.959Z,1509677096.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:00.207Z,1509677100.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:00.307Z,1509677100.307 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20171103T001125/Express0061.lzma
2017-11-03T02:45:00.371Z,1509677100.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:00.758Z,1509677100.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:01.111Z,1509677101.111 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0061.lzma.bak
2017-11-03T02:45:01.111Z,1509677101.111 [DataOverHttps](INFO): SBD MOMSN=5182517
2017-11-03T02:45:01.189Z,1509677101.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:01.770Z,1509677101.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:01.773Z,1509677101.773 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T02:45:01.773Z,1509677101.773 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T02:45:01.773Z,1509677101.773 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T02:45:01.971Z,1509677101.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:05.182Z,1509677105.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:05.331Z,1509677105.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:05.731Z,1509677105.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:06.131Z,1509677106.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:06.504Z,1509677106.504 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:45:06.504Z,1509677106.504 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:45:06.504Z,1509677106.504 [BPC1](ERROR): Communications Fault
2017-11-03T02:45:06.528Z,1509677106.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:06.614Z,1509677106.614 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:45:06.927Z,1509677106.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:07.330Z,1509677107.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:07.723Z,1509677107.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:07.812Z,1509677107.812 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:45:07.812Z,1509677107.812 [BPC1] No Fault, FailCount= 1
2017-11-03T02:45:08.174Z,1509677108.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:08.514Z,1509677108.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:08.928Z,1509677108.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:09.315Z,1509677109.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:09.715Z,1509677109.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:10.123Z,1509677110.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:10.515Z,1509677110.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:10.917Z,1509677110.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:11.318Z,1509677111.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:11.683Z,1509677111.683 [NAL9602](INFO): Powering up NAL9602
2017-11-03T02:45:11.715Z,1509677111.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:12.119Z,1509677112.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:12.523Z,1509677112.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:12.947Z,1509677112.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:13.426Z,1509677113.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:13.723Z,1509677113.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:14.121Z,1509677114.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:14.527Z,1509677114.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:14.919Z,1509677114.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:15.319Z,1509677115.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:15.713Z,1509677115.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:16.113Z,1509677116.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:16.514Z,1509677116.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:16.917Z,1509677116.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:17.350Z,1509677117.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:17.715Z,1509677117.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:18.114Z,1509677118.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:18.514Z,1509677118.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:18.913Z,1509677118.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:19.315Z,1509677119.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:19.718Z,1509677119.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:20.114Z,1509677120.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:20.514Z,1509677120.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:20.939Z,1509677120.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:21.314Z,1509677121.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:21.719Z,1509677121.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:22.137Z,1509677122.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:22.483Z,1509677122.483 [NAL9602](INFO): NAL9602 initialized
2017-11-03T02:45:22.519Z,1509677122.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:22.914Z,1509677122.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:23.363Z,1509677123.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:23.743Z,1509677123.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:24.144Z,1509677124.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:24.516Z,1509677124.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:24.915Z,1509677124.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:25.343Z,1509677125.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:25.723Z,1509677125.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:26.151Z,1509677126.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:26.555Z,1509677126.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:26.943Z,1509677126.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:27.359Z,1509677127.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:27.723Z,1509677127.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:28.123Z,1509677128.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:28.519Z,1509677128.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:28.914Z,1509677128.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:29.355Z,1509677129.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:29.745Z,1509677129.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:30.128Z,1509677130.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:30.523Z,1509677130.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:30.919Z,1509677130.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:31.357Z,1509677131.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:31.724Z,1509677131.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:32.123Z,1509677132.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:32.545Z,1509677132.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:32.959Z,1509677132.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:33.348Z,1509677133.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:33.723Z,1509677133.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:34.123Z,1509677134.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:34.520Z,1509677134.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:34.923Z,1509677134.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:35.168Z,1509677135.168 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:45:35.168Z,1509677135.168 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T02:45:35.168Z,1509677135.168 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:45:35.346Z,1509677135.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:45:35.347Z,1509677135.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:35.441Z,1509677135.441 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:45:35.573Z,1509677135.573 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:45:35.712Z,1509677135.712 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:45:35.761Z,1509677135.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:45:35.762Z,1509677135.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:36.147Z,1509677136.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:45:36.148Z,1509677136.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:36.524Z,1509677136.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:45:36.525Z,1509677136.525 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:36.525Z,1509677136.525 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2017-11-03T02:45:36.525Z,1509677136.525 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:45:36.527Z,1509677136.527 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:36.527Z,1509677136.527 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2017-11-03T02:45:36.527Z,1509677136.527 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:45:36.549Z,1509677136.549 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:36.550Z,1509677136.550 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2017-11-03T02:45:36.550Z,1509677136.550 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:45:36.662Z,1509677136.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:45:36.662Z,1509677136.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:45:36.662Z,1509677136.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:45:37.021Z,1509677137.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:45:37.021Z,1509677137.021 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2017-11-03T02:45:37.021Z,1509677137.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:45:37.021Z,1509677137.021 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2017-11-03T02:45:37.022Z,1509677137.022 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:45:37.022Z,1509677137.022 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2017-11-03T02:45:37.022Z,1509677137.022 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:45:37.022Z,1509677137.022 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T02:45:37.328Z,1509677137.328 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:45:37.329Z,1509677137.329 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:45:37.329Z,1509677137.329 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:45:37.329Z,1509677137.329 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:45:37.331Z,1509677137.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:45:37.332Z,1509677137.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:45:37.332Z,1509677137.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:45:37.333Z,1509677137.333 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:45:37.333Z,1509677137.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:45:37.333Z,1509677137.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:45:37.334Z,1509677137.334 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:45:37.334Z,1509677137.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:45:37.335Z,1509677137.335 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:45:37.708Z,1509677137.708 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:45:37.708Z,1509677137.708 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:45:37.708Z,1509677137.708 [BPC1](ERROR): Data Fault
2017-11-03T02:45:37.719Z,1509677137.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:45:37.720Z,1509677137.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:37.828Z,1509677137.828 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:45:38.115Z,1509677138.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:45:38.116Z,1509677138.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:38.544Z,1509677138.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:45:38.545Z,1509677138.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:38.942Z,1509677138.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:45:38.943Z,1509677138.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:39.032Z,1509677139.032 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:45:39.033Z,1509677139.033 [BPC1] No Fault, FailCount= 1
2017-11-03T02:45:39.394Z,1509677139.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T02:45:39.395Z,1509677139.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:39.715Z,1509677139.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:45:39.716Z,1509677139.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:40.146Z,1509677140.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:45:40.147Z,1509677140.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:40.523Z,1509677140.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:45:40.524Z,1509677140.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:40.916Z,1509677140.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:45:40.917Z,1509677140.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:41.343Z,1509677141.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:45:41.344Z,1509677141.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:41.499Z,1509677141.499 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:45:41.555Z,1509677141.555 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:45:41.556Z,1509677141.556 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:45:41.557Z,1509677141.557 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:45:41.558Z,1509677141.558 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:45:41.757Z,1509677141.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:45:41.758Z,1509677141.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:42.156Z,1509677142.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:42.525Z,1509677142.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:42.924Z,1509677142.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:43.324Z,1509677143.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:43.721Z,1509677143.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:44.124Z,1509677144.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:44.535Z,1509677144.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:44.926Z,1509677144.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:45.343Z,1509677145.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:45.726Z,1509677145.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:46.120Z,1509677146.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:46.525Z,1509677146.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:46.927Z,1509677146.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:47.343Z,1509677147.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:47.736Z,1509677147.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:48.251Z,1509677148.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:48.515Z,1509677148.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:48.930Z,1509677148.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:49.336Z,1509677149.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:49.715Z,1509677149.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:50.133Z,1509677150.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:50.542Z,1509677150.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:50.967Z,1509677150.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:51.341Z,1509677151.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:51.716Z,1509677151.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:52.162Z,1509677152.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:52.524Z,1509677152.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:52.957Z,1509677152.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:53.390Z,1509677153.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:53.747Z,1509677153.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:54.166Z,1509677154.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:54.554Z,1509677154.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:54.923Z,1509677154.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:55.358Z,1509677155.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:55.725Z,1509677155.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:56.119Z,1509677156.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:56.549Z,1509677156.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:56.946Z,1509677156.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:57.349Z,1509677157.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:57.726Z,1509677157.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:58.123Z,1509677158.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:58.519Z,1509677158.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:58.989Z,1509677158.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:59.355Z,1509677159.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:45:59.751Z,1509677159.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:00.159Z,1509677160.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:00.561Z,1509677160.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:00.939Z,1509677160.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:01.375Z,1509677161.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:01.737Z,1509677161.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:02.133Z,1509677162.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:02.536Z,1509677162.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:08.839Z,1509677168.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:09.081Z,1509677169.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:09.446Z,1509677169.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:09.815Z,1509677169.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:10.212Z,1509677170.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:10.639Z,1509677170.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:11.010Z,1509677171.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:11.417Z,1509677171.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:11.817Z,1509677171.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:12.204Z,1509677172.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:12.603Z,1509677172.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:13.012Z,1509677173.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:13.403Z,1509677173.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:13.803Z,1509677173.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:14.198Z,1509677174.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:14.575Z,1509677174.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:15.058Z,1509677175.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:15.375Z,1509677175.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:15.807Z,1509677175.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:16.179Z,1509677176.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:16.623Z,1509677176.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:17.069Z,1509677177.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:17.411Z,1509677177.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:17.780Z,1509677177.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:18.182Z,1509677178.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:18.583Z,1509677178.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:18.980Z,1509677178.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:19.410Z,1509677179.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:19.807Z,1509677179.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:20.209Z,1509677180.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:20.579Z,1509677180.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:20.983Z,1509677180.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:21.379Z,1509677181.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:21.819Z,1509677181.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:22.185Z,1509677182.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:22.650Z,1509677182.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:22.993Z,1509677182.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:23.429Z,1509677183.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:23.789Z,1509677183.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:24.203Z,1509677184.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:24.629Z,1509677184.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:24.990Z,1509677184.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:25.397Z,1509677185.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:25.801Z,1509677185.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:26.202Z,1509677186.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:26.588Z,1509677186.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:26.995Z,1509677186.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:27.387Z,1509677187.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:27.797Z,1509677187.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:28.195Z,1509677188.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:28.596Z,1509677188.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:29.049Z,1509677189.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:29.405Z,1509677189.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:29.810Z,1509677189.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:30.176Z,1509677190.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:30.581Z,1509677190.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:31.018Z,1509677191.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:31.389Z,1509677191.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:31.810Z,1509677191.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:32.209Z,1509677192.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:32.585Z,1509677192.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:33.041Z,1509677193.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:33.387Z,1509677193.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:33.785Z,1509677193.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:34.238Z,1509677194.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:34.611Z,1509677194.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:35.009Z,1509677195.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:35.447Z,1509677195.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:35.785Z,1509677195.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:36.182Z,1509677196.182 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:46:36.182Z,1509677196.182 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:46:36.182Z,1509677196.182 [BPC1](ERROR): Data Fault
2017-11-03T02:46:36.190Z,1509677196.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:36.289Z,1509677196.289 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:46:36.588Z,1509677196.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:36.978Z,1509677196.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:37.389Z,1509677197.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:37.480Z,1509677197.480 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:46:37.480Z,1509677197.480 [BPC1] No Fault, FailCount= 1
2017-11-03T02:46:37.847Z,1509677197.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:38.192Z,1509677198.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:38.618Z,1509677198.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:38.985Z,1509677198.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:39.377Z,1509677199.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:39.785Z,1509677199.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:40.191Z,1509677200.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:40.602Z,1509677200.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:40.999Z,1509677200.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:41.395Z,1509677201.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:41.791Z,1509677201.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:42.191Z,1509677202.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:42.586Z,1509677202.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:43.074Z,1509677203.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:43.403Z,1509677203.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:43.795Z,1509677203.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:44.195Z,1509677204.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:44.591Z,1509677204.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:45.054Z,1509677205.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:45.387Z,1509677205.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:45.785Z,1509677205.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:46.195Z,1509677206.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:46.600Z,1509677206.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:47.057Z,1509677207.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:47.403Z,1509677207.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:47.787Z,1509677207.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:48.191Z,1509677208.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:48.586Z,1509677208.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:49.003Z,1509677209.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:49.405Z,1509677209.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:49.799Z,1509677209.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:50.202Z,1509677210.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:50.599Z,1509677210.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:51.016Z,1509677211.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:51.399Z,1509677211.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:51.819Z,1509677211.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:52.198Z,1509677212.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:52.648Z,1509677212.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:53.027Z,1509677213.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:53.399Z,1509677213.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:53.798Z,1509677213.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:54.175Z,1509677214.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:54.599Z,1509677214.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:54.975Z,1509677214.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:55.396Z,1509677215.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:55.793Z,1509677215.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:56.203Z,1509677216.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:56.575Z,1509677216.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:57.046Z,1509677217.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:57.374Z,1509677217.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:57.779Z,1509677217.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:58.179Z,1509677218.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:58.604Z,1509677218.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:59.059Z,1509677219.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:59.400Z,1509677219.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:46:59.781Z,1509677219.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:00.203Z,1509677220.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:00.580Z,1509677220.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:00.980Z,1509677220.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:01.401Z,1509677221.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:01.803Z,1509677221.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:02.206Z,1509677222.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:02.589Z,1509677222.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:05.959Z,1509677225.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:06.108Z,1509677226.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:06.527Z,1509677226.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:06.972Z,1509677226.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:07.328Z,1509677227.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:07.743Z,1509677227.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:08.143Z,1509677228.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:08.503Z,1509677228.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:08.903Z,1509677228.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:09.328Z,1509677229.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:09.731Z,1509677229.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:10.126Z,1509677230.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:10.504Z,1509677230.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:10.899Z,1509677230.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:11.323Z,1509677231.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:11.705Z,1509677231.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:12.138Z,1509677232.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:12.526Z,1509677232.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:12.928Z,1509677232.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:13.333Z,1509677233.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:13.706Z,1509677233.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:14.106Z,1509677234.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:14.507Z,1509677234.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:14.911Z,1509677234.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:15.343Z,1509677235.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:15.733Z,1509677235.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:16.136Z,1509677236.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:16.510Z,1509677236.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:16.907Z,1509677236.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:17.337Z,1509677237.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:17.715Z,1509677237.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:18.111Z,1509677238.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:18.555Z,1509677238.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:18.936Z,1509677238.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:19.353Z,1509677239.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:19.754Z,1509677239.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:20.114Z,1509677240.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:20.543Z,1509677240.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:20.911Z,1509677240.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:21.355Z,1509677241.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:21.739Z,1509677241.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:22.155Z,1509677242.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:22.507Z,1509677242.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:22.907Z,1509677242.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:23.311Z,1509677243.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:23.708Z,1509677243.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:24.111Z,1509677244.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:24.537Z,1509677244.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:24.920Z,1509677244.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:25.325Z,1509677245.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:25.719Z,1509677245.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:26.119Z,1509677246.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:26.506Z,1509677246.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:26.903Z,1509677246.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:27.329Z,1509677247.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:27.728Z,1509677247.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:28.127Z,1509677248.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:28.503Z,1509677248.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:28.903Z,1509677248.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:29.326Z,1509677249.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:29.727Z,1509677249.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:30.107Z,1509677250.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:30.530Z,1509677250.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:30.933Z,1509677250.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:31.339Z,1509677251.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:31.711Z,1509677251.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:32.107Z,1509677252.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:32.509Z,1509677252.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:32.907Z,1509677252.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:33.356Z,1509677253.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:33.739Z,1509677253.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:34.154Z,1509677254.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:34.508Z,1509677254.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:34.933Z,1509677254.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:35.334Z,1509677255.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:35.734Z,1509677255.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:36.108Z,1509677256.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:36.530Z,1509677256.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:36.931Z,1509677256.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:37.310Z,1509677257.310 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:47:37.310Z,1509677257.310 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:47:37.310Z,1509677257.310 [BPC1](ERROR): Communications Fault
2017-11-03T02:47:37.343Z,1509677257.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:37.421Z,1509677257.421 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:47:37.586Z,1509677257.586 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:47:37.587Z,1509677257.587 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T02:47:37.587Z,1509677257.587 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:47:37.730Z,1509677257.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T02:47:37.731Z,1509677257.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:37.828Z,1509677257.828 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:47:37.829Z,1509677257.829 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T02:47:37.989Z,1509677257.989 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:47:38.147Z,1509677258.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:47:38.148Z,1509677258.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:38.161Z,1509677258.161 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:47:38.512Z,1509677258.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:47:38.513Z,1509677258.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:38.622Z,1509677258.622 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:47:38.622Z,1509677258.622 [BPC1] No Fault, FailCount= 1
2017-11-03T02:47:38.974Z,1509677258.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:47:38.975Z,1509677258.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:39.336Z,1509677259.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:47:39.337Z,1509677259.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:39.735Z,1509677259.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:47:39.736Z,1509677259.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:40.136Z,1509677260.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:47:40.137Z,1509677260.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:40.536Z,1509677260.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:47:40.537Z,1509677260.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:40.911Z,1509677260.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:47:40.913Z,1509677260.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:41.311Z,1509677261.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:47:41.313Z,1509677261.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:41.712Z,1509677261.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:47:41.713Z,1509677261.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:42.112Z,1509677262.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:47:42.113Z,1509677262.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:42.537Z,1509677262.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:47:42.538Z,1509677262.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:42.938Z,1509677262.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:47:42.939Z,1509677262.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:43.337Z,1509677263.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:47:43.338Z,1509677263.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:43.712Z,1509677263.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:47:43.713Z,1509677263.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:44.110Z,1509677264.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:47:44.111Z,1509677264.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:44.508Z,1509677264.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:47:44.509Z,1509677264.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:44.910Z,1509677264.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:47:44.911Z,1509677264.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:45.338Z,1509677265.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:47:45.339Z,1509677265.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:45.713Z,1509677265.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:47:45.714Z,1509677265.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:46.137Z,1509677266.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:47:46.138Z,1509677266.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:46.509Z,1509677266.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:47:46.510Z,1509677266.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:46.910Z,1509677266.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:47:46.911Z,1509677266.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:47.313Z,1509677267.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:47:47.313Z,1509677267.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:47.710Z,1509677267.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:47:47.711Z,1509677267.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:48.113Z,1509677268.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:47:48.114Z,1509677268.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:48.516Z,1509677268.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:47:48.517Z,1509677268.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:48.915Z,1509677268.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:47:48.917Z,1509677268.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:49.319Z,1509677269.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:47:49.320Z,1509677269.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:49.712Z,1509677269.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:47:49.713Z,1509677269.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:50.118Z,1509677270.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:47:50.119Z,1509677270.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:50.513Z,1509677270.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:47:50.514Z,1509677270.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:50.912Z,1509677270.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:47:50.913Z,1509677270.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:51.316Z,1509677271.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:47:51.317Z,1509677271.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:51.717Z,1509677271.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:47:51.718Z,1509677271.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:52.170Z,1509677272.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:47:52.171Z,1509677272.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:52.514Z,1509677272.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:47:52.515Z,1509677272.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:52.919Z,1509677272.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:47:52.920Z,1509677272.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:53.349Z,1509677273.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:47:53.350Z,1509677273.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:53.712Z,1509677273.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:47:53.713Z,1509677273.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:54.145Z,1509677274.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:47:54.146Z,1509677274.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:54.554Z,1509677274.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:47:54.555Z,1509677274.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:54.930Z,1509677274.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:47:54.931Z,1509677274.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:55.320Z,1509677275.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:47:55.321Z,1509677275.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:55.719Z,1509677275.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:47:55.720Z,1509677275.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:56.114Z,1509677276.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:47:56.115Z,1509677276.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:56.518Z,1509677276.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:47:56.519Z,1509677276.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:56.910Z,1509677276.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:47:56.911Z,1509677276.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:57.323Z,1509677277.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T02:47:57.324Z,1509677277.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:57.720Z,1509677277.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:58.131Z,1509677278.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:58.515Z,1509677278.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:58.915Z,1509677278.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:59.323Z,1509677279.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:47:59.718Z,1509677279.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:00.120Z,1509677280.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:00.524Z,1509677280.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:00.925Z,1509677280.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:01.335Z,1509677281.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:01.716Z,1509677281.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:02.118Z,1509677282.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:02.516Z,1509677282.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:02.916Z,1509677282.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:06.033Z,1509677286.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:06.181Z,1509677286.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:06.650Z,1509677286.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:06.974Z,1509677286.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:07.369Z,1509677287.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:07.814Z,1509677287.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:08.171Z,1509677288.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:08.618Z,1509677288.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:09.018Z,1509677289.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:09.381Z,1509677289.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:09.768Z,1509677289.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:10.172Z,1509677290.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:10.572Z,1509677290.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:10.973Z,1509677290.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:11.381Z,1509677291.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:11.786Z,1509677291.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:12.180Z,1509677292.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:12.575Z,1509677292.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:12.973Z,1509677292.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:13.373Z,1509677293.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:13.771Z,1509677293.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:14.173Z,1509677294.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:14.580Z,1509677294.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:14.980Z,1509677294.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:15.385Z,1509677295.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:15.773Z,1509677295.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:16.179Z,1509677296.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:16.574Z,1509677296.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:16.973Z,1509677296.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:17.381Z,1509677297.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:17.800Z,1509677297.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:18.187Z,1509677298.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:18.574Z,1509677298.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:18.974Z,1509677298.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:19.373Z,1509677299.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:19.772Z,1509677299.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:20.174Z,1509677300.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:20.581Z,1509677300.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:21.050Z,1509677301.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:21.383Z,1509677301.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:21.798Z,1509677301.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:22.178Z,1509677302.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:22.599Z,1509677302.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:22.998Z,1509677302.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:23.383Z,1509677303.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:23.783Z,1509677303.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:24.186Z,1509677304.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:24.576Z,1509677304.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:24.959Z,1509677304.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:25.383Z,1509677305.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:25.777Z,1509677305.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:26.159Z,1509677306.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:26.585Z,1509677306.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:26.988Z,1509677306.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:27.390Z,1509677307.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:27.756Z,1509677307.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:28.187Z,1509677308.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:28.562Z,1509677308.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:28.956Z,1509677308.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:29.387Z,1509677309.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:29.789Z,1509677309.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:30.187Z,1509677310.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:30.560Z,1509677310.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:30.962Z,1509677310.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:31.359Z,1509677311.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:31.760Z,1509677311.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:32.165Z,1509677312.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:32.588Z,1509677312.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:32.992Z,1509677312.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:33.390Z,1509677313.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:33.767Z,1509677313.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:34.159Z,1509677314.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:34.566Z,1509677314.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:35.019Z,1509677315.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:35.391Z,1509677315.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:35.803Z,1509677315.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:36.191Z,1509677316.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:36.598Z,1509677316.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:36.992Z,1509677316.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:37.367Z,1509677317.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:37.367Z,1509677317.367 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2017-11-03T02:48:37.367Z,1509677317.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:48:37.369Z,1509677317.369 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:37.369Z,1509677317.369 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2017-11-03T02:48:37.369Z,1509677317.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:48:37.371Z,1509677317.371 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:37.371Z,1509677317.371 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2017-11-03T02:48:37.371Z,1509677317.371 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:48:37.457Z,1509677317.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:48:37.457Z,1509677317.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:48:37.457Z,1509677317.457 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:48:37.852Z,1509677317.852 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:48:37.853Z,1509677317.853 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2017-11-03T02:48:37.853Z,1509677317.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:48:37.853Z,1509677317.853 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2017-11-03T02:48:37.854Z,1509677317.854 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:48:37.854Z,1509677317.854 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2017-11-03T02:48:38.170Z,1509677318.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:48:38.170Z,1509677318.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:48:38.170Z,1509677318.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:48:38.171Z,1509677318.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:48:38.171Z,1509677318.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:48:38.172Z,1509677318.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:48:38.172Z,1509677318.172 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:48:38.172Z,1509677318.172 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:48:38.173Z,1509677318.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:48:38.585Z,1509677318.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:48:38.586Z,1509677318.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:38.980Z,1509677318.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:48:38.981Z,1509677318.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:39.384Z,1509677319.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:48:39.385Z,1509677319.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:39.775Z,1509677319.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:48:39.776Z,1509677319.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:40.180Z,1509677320.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:48:40.181Z,1509677320.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:40.554Z,1509677320.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:48:40.555Z,1509677320.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:40.958Z,1509677320.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:48:40.959Z,1509677320.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:41.386Z,1509677321.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:48:41.387Z,1509677321.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:41.782Z,1509677321.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:48:41.783Z,1509677321.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:42.186Z,1509677322.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:48:42.187Z,1509677322.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:42.578Z,1509677322.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:48:42.578Z,1509677322.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:42.958Z,1509677322.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:48:42.959Z,1509677322.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:43.358Z,1509677323.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:48:43.359Z,1509677323.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:43.759Z,1509677323.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:48:43.777Z,1509677323.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:44.178Z,1509677324.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:48:44.179Z,1509677324.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:44.579Z,1509677324.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:48:44.580Z,1509677324.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:44.979Z,1509677324.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:48:44.979Z,1509677324.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:45.382Z,1509677325.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:48:45.383Z,1509677325.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:45.759Z,1509677325.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:48:45.760Z,1509677325.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:46.170Z,1509677326.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:48:46.171Z,1509677326.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:46.580Z,1509677326.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:48:46.581Z,1509677326.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:46.959Z,1509677326.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:48:46.960Z,1509677326.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:47.386Z,1509677327.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:48:47.387Z,1509677327.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:47.782Z,1509677327.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:48:47.783Z,1509677327.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:48.179Z,1509677328.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:48:48.181Z,1509677328.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:48.570Z,1509677328.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:48:48.571Z,1509677328.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:49.051Z,1509677329.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T02:48:49.051Z,1509677329.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:49.358Z,1509677329.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:48:49.359Z,1509677329.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:49.776Z,1509677329.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:48:49.777Z,1509677329.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:50.190Z,1509677330.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:48:50.191Z,1509677330.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:50.582Z,1509677330.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:48:50.583Z,1509677330.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:51.023Z,1509677331.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T02:48:51.024Z,1509677331.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:51.403Z,1509677331.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:48:51.404Z,1509677331.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:51.774Z,1509677331.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:48:51.775Z,1509677331.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:52.170Z,1509677332.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:48:52.171Z,1509677332.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:52.558Z,1509677332.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:48:52.559Z,1509677332.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:52.959Z,1509677332.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:48:52.960Z,1509677332.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:53.386Z,1509677333.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:48:53.387Z,1509677333.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:53.780Z,1509677333.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:48:53.781Z,1509677333.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:54.186Z,1509677334.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:48:54.187Z,1509677334.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:54.572Z,1509677334.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:48:54.573Z,1509677334.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:54.958Z,1509677334.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:48:54.959Z,1509677334.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:55.359Z,1509677335.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:48:55.359Z,1509677335.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:55.782Z,1509677335.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:48:55.782Z,1509677335.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:56.159Z,1509677336.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:48:56.159Z,1509677336.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:56.586Z,1509677336.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:48:56.587Z,1509677336.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:56.990Z,1509677336.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:48:56.991Z,1509677336.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:57.387Z,1509677337.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:57.759Z,1509677337.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:58.182Z,1509677338.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:58.561Z,1509677338.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:58.964Z,1509677338.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:59.383Z,1509677339.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:48:59.786Z,1509677339.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:00.184Z,1509677340.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:00.587Z,1509677340.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:00.964Z,1509677340.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:01.363Z,1509677341.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:01.767Z,1509677341.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:02.187Z,1509677342.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:02.593Z,1509677342.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:02.995Z,1509677342.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:06.131Z,1509677346.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:06.296Z,1509677346.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:06.694Z,1509677346.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:07.123Z,1509677347.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:07.504Z,1509677347.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:07.946Z,1509677347.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:08.327Z,1509677348.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:08.697Z,1509677348.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:09.097Z,1509677349.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:09.497Z,1509677349.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:09.895Z,1509677349.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:10.311Z,1509677350.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:10.702Z,1509677350.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:11.107Z,1509677351.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:11.494Z,1509677351.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:11.898Z,1509677351.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:12.303Z,1509677352.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:12.709Z,1509677352.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:13.111Z,1509677353.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:13.498Z,1509677353.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:13.897Z,1509677353.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:14.305Z,1509677354.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:14.701Z,1509677354.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:15.105Z,1509677355.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:15.488Z,1509677355.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:15.901Z,1509677355.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:16.307Z,1509677356.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:16.710Z,1509677356.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:17.106Z,1509677357.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:17.505Z,1509677357.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:17.909Z,1509677357.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:18.307Z,1509677358.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:18.711Z,1509677358.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:19.115Z,1509677359.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:19.505Z,1509677359.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:19.911Z,1509677359.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:20.324Z,1509677360.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:20.711Z,1509677360.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:21.142Z,1509677361.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:21.514Z,1509677361.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:21.918Z,1509677361.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:22.343Z,1509677362.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:22.715Z,1509677362.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:23.111Z,1509677363.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:23.487Z,1509677363.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:23.890Z,1509677363.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:24.309Z,1509677364.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:24.719Z,1509677364.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:25.110Z,1509677365.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:25.483Z,1509677365.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:25.886Z,1509677365.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:26.313Z,1509677366.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:26.708Z,1509677366.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:27.109Z,1509677367.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:27.482Z,1509677367.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:27.882Z,1509677367.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:28.311Z,1509677368.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:28.713Z,1509677368.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:29.111Z,1509677369.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:29.487Z,1509677369.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:29.882Z,1509677369.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:30.308Z,1509677370.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:30.710Z,1509677370.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:31.118Z,1509677371.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:31.483Z,1509677371.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:31.891Z,1509677371.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:32.311Z,1509677372.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:32.719Z,1509677372.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:33.109Z,1509677373.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:33.487Z,1509677373.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:33.887Z,1509677373.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:34.378Z,1509677374.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:34.700Z,1509677374.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:35.118Z,1509677375.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:35.522Z,1509677375.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:35.890Z,1509677375.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:36.323Z,1509677376.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:36.739Z,1509677376.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:37.117Z,1509677377.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:37.487Z,1509677377.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:37.891Z,1509677377.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:38.317Z,1509677378.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:38.700Z,1509677378.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:39.100Z,1509677379.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:39.487Z,1509677379.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:39.887Z,1509677379.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:40.318Z,1509677380.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:40.700Z,1509677380.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:41.092Z,1509677381.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:41.487Z,1509677381.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:41.886Z,1509677381.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:42.292Z,1509677382.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:42.718Z,1509677382.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:43.100Z,1509677383.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:43.491Z,1509677383.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:43.891Z,1509677383.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:44.304Z,1509677384.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:44.693Z,1509677384.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:45.097Z,1509677385.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:45.498Z,1509677385.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:45.887Z,1509677385.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:46.297Z,1509677386.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:46.722Z,1509677386.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:47.097Z,1509677387.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:47.491Z,1509677387.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:47.890Z,1509677387.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:48.297Z,1509677388.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:48.755Z,1509677388.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:49.102Z,1509677389.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:49.531Z,1509677389.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:49.899Z,1509677389.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:50.342Z,1509677390.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:50.731Z,1509677390.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:51.100Z,1509677391.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:51.493Z,1509677391.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:51.891Z,1509677391.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:52.301Z,1509677392.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:52.700Z,1509677392.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:53.099Z,1509677393.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:53.493Z,1509677393.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:53.888Z,1509677393.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:54.300Z,1509677394.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:54.699Z,1509677394.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:55.100Z,1509677395.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:55.499Z,1509677395.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:55.895Z,1509677395.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:56.301Z,1509677396.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:56.700Z,1509677396.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:57.100Z,1509677397.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:57.495Z,1509677397.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:57.899Z,1509677397.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:58.307Z,1509677398.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:58.700Z,1509677398.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:59.100Z,1509677399.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:59.492Z,1509677399.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:49:59.899Z,1509677399.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:00.299Z,1509677400.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:00.701Z,1509677400.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:01.106Z,1509677401.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:01.494Z,1509677401.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:01.891Z,1509677401.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:02.306Z,1509677402.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:02.326Z,1509677402.326 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T02:50:02.326Z,1509677402.326 [Default:CheckIn:C.Wait] Stopped
2017-11-03T02:50:02.326Z,1509677402.326 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T02:50:02.326Z,1509677402.326 [Default:CheckIn:D] Running Loop=1
2017-11-03T02:50:02.770Z,1509677402.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:02.778Z,1509677402.778 [Default:CheckIn:D] Stopped
2017-11-03T02:50:02.778Z,1509677402.778 [Default:CheckIn:E] Running Loop=1
2017-11-03T02:50:03.105Z,1509677403.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:03.108Z,1509677403.108 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.920182 min 
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn:E] Stopped
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn] Stopped
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn](INFO): Running loop #16
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn] Running Loop=16
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T02:50:03.109Z,1509677403.109 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T02:50:06.207Z,1509677406.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:06.354Z,1509677406.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:06.790Z,1509677406.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:07.191Z,1509677407.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:07.552Z,1509677407.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:07.947Z,1509677407.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:08.327Z,1509677408.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:08.755Z,1509677408.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:09.131Z,1509677409.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:09.555Z,1509677409.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:09.951Z,1509677409.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:10.359Z,1509677410.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:10.727Z,1509677410.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:11.127Z,1509677411.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:11.528Z,1509677411.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:11.955Z,1509677411.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:12.359Z,1509677412.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:12.759Z,1509677412.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:13.159Z,1509677413.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:13.527Z,1509677413.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:13.931Z,1509677413.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:14.332Z,1509677414.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:14.731Z,1509677414.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:15.131Z,1509677415.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:15.554Z,1509677415.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:15.959Z,1509677415.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:16.351Z,1509677416.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:16.751Z,1509677416.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:17.131Z,1509677417.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:17.532Z,1509677417.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:17.932Z,1509677417.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:18.363Z,1509677418.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:18.755Z,1509677418.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:19.183Z,1509677419.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:19.570Z,1509677419.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:19.939Z,1509677419.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:20.379Z,1509677420.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:20.731Z,1509677420.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:21.179Z,1509677421.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:21.591Z,1509677421.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:21.959Z,1509677421.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:22.357Z,1509677422.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:22.731Z,1509677422.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:23.135Z,1509677423.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:23.535Z,1509677423.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:23.935Z,1509677423.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:24.359Z,1509677424.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:24.763Z,1509677424.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:25.158Z,1509677425.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:25.535Z,1509677425.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:25.935Z,1509677425.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:26.334Z,1509677426.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:26.735Z,1509677426.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:27.136Z,1509677427.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:27.567Z,1509677427.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:27.967Z,1509677427.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:28.357Z,1509677428.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:28.739Z,1509677428.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:29.131Z,1509677429.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:29.537Z,1509677429.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:29.935Z,1509677429.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:30.359Z,1509677430.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:30.757Z,1509677430.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:31.163Z,1509677431.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:31.532Z,1509677431.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:31.935Z,1509677431.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:32.336Z,1509677432.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:32.740Z,1509677432.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:33.136Z,1509677433.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:33.558Z,1509677433.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:34.026Z,1509677434.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:34.358Z,1509677434.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:34.779Z,1509677434.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:35.138Z,1509677435.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:35.567Z,1509677435.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:35.961Z,1509677435.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:36.359Z,1509677436.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:36.757Z,1509677436.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:37.158Z,1509677437.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:37.532Z,1509677437.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:37.959Z,1509677437.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:38.334Z,1509677438.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:38.732Z,1509677438.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:39.135Z,1509677439.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:39.565Z,1509677439.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:39.961Z,1509677439.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:40.362Z,1509677440.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:40.731Z,1509677440.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:41.131Z,1509677441.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:41.535Z,1509677441.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:41.930Z,1509677441.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:42.362Z,1509677442.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:42.765Z,1509677442.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:43.144Z,1509677443.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:43.535Z,1509677443.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:43.939Z,1509677443.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:44.333Z,1509677444.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:44.735Z,1509677444.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:45.139Z,1509677445.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:45.563Z,1509677445.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:45.963Z,1509677445.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:46.363Z,1509677446.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:46.734Z,1509677446.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:47.139Z,1509677447.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:47.535Z,1509677447.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:47.982Z,1509677447.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:48.384Z,1509677448.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:48.765Z,1509677448.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:49.148Z,1509677449.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:49.571Z,1509677449.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:49.939Z,1509677449.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:50.366Z,1509677450.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:50.775Z,1509677450.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:51.135Z,1509677451.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:51.539Z,1509677451.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:51.973Z,1509677451.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:52.357Z,1509677452.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:52.741Z,1509677452.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:53.155Z,1509677453.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:53.554Z,1509677453.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:53.986Z,1509677453.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:54.367Z,1509677454.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:54.763Z,1509677454.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:55.154Z,1509677455.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:55.564Z,1509677455.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:55.951Z,1509677455.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:56.372Z,1509677456.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:56.749Z,1509677456.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:57.149Z,1509677457.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:57.583Z,1509677457.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:57.963Z,1509677457.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:58.387Z,1509677458.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:58.798Z,1509677458.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:59.148Z,1509677459.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:59.617Z,1509677459.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:50:59.965Z,1509677459.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:00.397Z,1509677460.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:00.764Z,1509677460.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:01.168Z,1509677461.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:01.568Z,1509677461.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:01.968Z,1509677461.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:02.416Z,1509677462.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:02.767Z,1509677462.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:03.215Z,1509677463.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:06.613Z,1509677466.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:06.807Z,1509677466.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:07.220Z,1509677467.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:07.575Z,1509677467.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:08.014Z,1509677468.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:08.410Z,1509677468.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:08.773Z,1509677468.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:09.171Z,1509677469.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:09.584Z,1509677469.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:09.988Z,1509677469.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:10.387Z,1509677470.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:10.773Z,1509677470.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:11.172Z,1509677471.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:11.573Z,1509677471.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:11.974Z,1509677471.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:12.382Z,1509677472.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:12.781Z,1509677472.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:13.186Z,1509677473.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:13.575Z,1509677473.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:13.973Z,1509677473.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:14.374Z,1509677474.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:14.774Z,1509677474.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:15.173Z,1509677475.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:15.585Z,1509677475.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:15.989Z,1509677475.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:16.385Z,1509677476.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:16.777Z,1509677476.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:17.176Z,1509677477.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:17.578Z,1509677477.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:17.981Z,1509677477.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:18.389Z,1509677478.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:18.784Z,1509677478.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:19.185Z,1509677479.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:19.578Z,1509677479.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:20.003Z,1509677480.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:20.408Z,1509677480.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:20.783Z,1509677480.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:21.183Z,1509677481.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:21.635Z,1509677481.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:21.982Z,1509677481.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:22.432Z,1509677482.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:22.799Z,1509677482.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:23.185Z,1509677483.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:23.583Z,1509677483.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:23.982Z,1509677483.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:24.391Z,1509677484.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:24.789Z,1509677484.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:25.191Z,1509677485.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:25.583Z,1509677485.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:25.982Z,1509677485.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:26.363Z,1509677486.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:26.763Z,1509677486.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:27.182Z,1509677487.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:27.591Z,1509677487.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:27.990Z,1509677487.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:28.384Z,1509677488.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:28.782Z,1509677488.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:29.183Z,1509677489.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:29.582Z,1509677489.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:29.982Z,1509677489.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:30.390Z,1509677490.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:30.791Z,1509677490.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:31.191Z,1509677491.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:31.584Z,1509677491.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:32.008Z,1509677492.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:32.363Z,1509677492.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:32.783Z,1509677492.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:33.181Z,1509677493.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:33.591Z,1509677493.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:33.984Z,1509677493.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:34.391Z,1509677494.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:34.826Z,1509677494.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:35.162Z,1509677495.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:35.595Z,1509677495.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:35.987Z,1509677495.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:36.415Z,1509677496.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:36.819Z,1509677496.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:37.190Z,1509677497.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:37.562Z,1509677497.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:37.963Z,1509677497.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:38.367Z,1509677498.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:38.367Z,1509677498.367 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2017-11-03T02:51:38.367Z,1509677498.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:51:38.385Z,1509677498.385 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:38.385Z,1509677498.385 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2017-11-03T02:51:38.385Z,1509677498.385 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:51:38.387Z,1509677498.387 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:38.387Z,1509677498.387 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2017-11-03T02:51:38.387Z,1509677498.387 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:51:38.485Z,1509677498.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:51:38.485Z,1509677498.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:51:38.485Z,1509677498.485 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:51:38.853Z,1509677498.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:51:38.854Z,1509677498.854 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2017-11-03T02:51:38.854Z,1509677498.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:51:38.854Z,1509677498.854 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2017-11-03T02:51:38.855Z,1509677498.855 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:51:38.855Z,1509677498.855 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2017-11-03T02:51:39.173Z,1509677499.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:51:39.174Z,1509677499.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:51:39.174Z,1509677499.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:51:39.175Z,1509677499.175 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:51:39.175Z,1509677499.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:51:39.175Z,1509677499.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:51:39.176Z,1509677499.176 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:51:39.192Z,1509677499.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:51:39.193Z,1509677499.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:51:39.580Z,1509677499.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:51:39.597Z,1509677499.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:39.983Z,1509677499.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:51:39.984Z,1509677499.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:40.376Z,1509677500.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:51:40.377Z,1509677500.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:40.774Z,1509677500.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:51:40.775Z,1509677500.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:41.167Z,1509677501.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:51:41.168Z,1509677501.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:41.570Z,1509677501.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:51:41.571Z,1509677501.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:41.969Z,1509677501.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:51:41.970Z,1509677501.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:42.383Z,1509677502.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:51:42.406Z,1509677502.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:42.783Z,1509677502.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:51:42.801Z,1509677502.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:43.203Z,1509677503.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:51:43.205Z,1509677503.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:43.566Z,1509677503.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:51:43.567Z,1509677503.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:43.649Z,1509677503.649 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T02:51:43.970Z,1509677503.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:51:43.971Z,1509677503.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:44.370Z,1509677504.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:51:44.371Z,1509677504.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:44.778Z,1509677504.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:51:44.779Z,1509677504.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:45.170Z,1509677505.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:51:45.171Z,1509677505.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:45.576Z,1509677505.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:51:45.577Z,1509677505.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:46.001Z,1509677506.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:51:46.002Z,1509677506.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:46.383Z,1509677506.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:51:46.401Z,1509677506.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:46.774Z,1509677506.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:51:46.775Z,1509677506.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:47.178Z,1509677507.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:51:47.179Z,1509677507.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:47.571Z,1509677507.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:51:47.572Z,1509677507.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:47.972Z,1509677507.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:51:47.973Z,1509677507.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:48.380Z,1509677508.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:51:48.381Z,1509677508.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:48.846Z,1509677508.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T02:51:48.846Z,1509677508.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:49.183Z,1509677509.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:51:49.185Z,1509677509.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:49.573Z,1509677509.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:51:49.574Z,1509677509.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:50.012Z,1509677510.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:51:50.013Z,1509677510.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:50.372Z,1509677510.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:51:50.373Z,1509677510.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:50.818Z,1509677510.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T02:51:50.819Z,1509677510.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:51.215Z,1509677511.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:51:51.216Z,1509677511.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:51.584Z,1509677511.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:51:51.585Z,1509677511.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:51.989Z,1509677511.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:51:51.990Z,1509677511.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:52.380Z,1509677512.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:51:52.381Z,1509677512.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:52.775Z,1509677512.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:51:52.776Z,1509677512.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:53.178Z,1509677513.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T02:51:53.179Z,1509677513.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:53.576Z,1509677513.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:51:53.577Z,1509677513.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:53.982Z,1509677513.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:51:53.983Z,1509677513.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:54.388Z,1509677514.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:51:54.389Z,1509677514.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:54.779Z,1509677514.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:51:54.780Z,1509677514.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:55.184Z,1509677515.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:51:55.185Z,1509677515.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:55.576Z,1509677515.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:51:55.577Z,1509677515.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:55.972Z,1509677515.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:51:55.973Z,1509677515.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:56.372Z,1509677516.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:51:56.373Z,1509677516.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:56.774Z,1509677516.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:51:56.775Z,1509677516.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:57.170Z,1509677517.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:51:57.171Z,1509677517.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:57.584Z,1509677517.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:51:57.585Z,1509677517.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:57.988Z,1509677517.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:51:57.989Z,1509677517.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:58.385Z,1509677518.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:58.777Z,1509677518.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:59.178Z,1509677519.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:59.575Z,1509677519.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:51:59.977Z,1509677519.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:00.390Z,1509677520.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:00.789Z,1509677520.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:01.184Z,1509677521.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:01.582Z,1509677521.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:01.980Z,1509677521.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:02.372Z,1509677522.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:02.775Z,1509677522.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:03.224Z,1509677523.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:06.295Z,1509677526.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:06.483Z,1509677526.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:06.903Z,1509677526.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:07.255Z,1509677527.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:07.683Z,1509677527.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:08.095Z,1509677528.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:08.476Z,1509677528.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:08.876Z,1509677528.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:09.279Z,1509677529.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:09.649Z,1509677529.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:10.055Z,1509677530.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:10.452Z,1509677530.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:10.849Z,1509677530.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:11.277Z,1509677531.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:11.673Z,1509677531.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:12.078Z,1509677532.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:12.450Z,1509677532.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:12.849Z,1509677532.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:13.272Z,1509677533.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:13.679Z,1509677533.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:14.078Z,1509677534.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:14.455Z,1509677534.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:14.855Z,1509677534.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:15.279Z,1509677535.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:15.680Z,1509677535.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:16.079Z,1509677536.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:16.451Z,1509677536.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:16.850Z,1509677536.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:17.278Z,1509677537.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:17.677Z,1509677537.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:18.079Z,1509677538.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:18.455Z,1509677538.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:18.850Z,1509677538.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:19.282Z,1509677539.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:19.679Z,1509677539.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:20.079Z,1509677540.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:20.495Z,1509677540.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:21.033Z,1509677541.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:21.264Z,1509677541.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:21.683Z,1509677541.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:22.058Z,1509677542.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:22.455Z,1509677542.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:22.855Z,1509677542.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:23.257Z,1509677543.257 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:52:23.257Z,1509677543.257 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:52:23.257Z,1509677543.257 [BPC1](ERROR): Communications Fault
2017-11-03T02:52:23.286Z,1509677543.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:23.377Z,1509677543.377 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:52:23.684Z,1509677543.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:24.087Z,1509677544.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:24.455Z,1509677544.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:24.548Z,1509677544.548 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:52:24.549Z,1509677544.549 [BPC1] No Fault, FailCount= 1
2017-11-03T02:52:24.907Z,1509677544.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:25.267Z,1509677545.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:25.685Z,1509677545.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:26.084Z,1509677546.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:26.456Z,1509677546.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:26.857Z,1509677546.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:27.261Z,1509677547.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:27.668Z,1509677547.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:28.060Z,1509677548.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:28.463Z,1509677548.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:28.859Z,1509677548.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:29.303Z,1509677549.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:29.668Z,1509677549.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:30.084Z,1509677550.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:30.463Z,1509677550.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:30.855Z,1509677550.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:31.288Z,1509677551.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:31.659Z,1509677551.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:32.060Z,1509677552.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:32.455Z,1509677552.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:32.852Z,1509677552.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:33.262Z,1509677553.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:33.687Z,1509677553.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:34.056Z,1509677554.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:34.455Z,1509677554.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:34.863Z,1509677554.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:35.258Z,1509677555.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:35.668Z,1509677555.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:36.057Z,1509677556.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:36.463Z,1509677556.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:36.861Z,1509677556.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:37.258Z,1509677557.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:37.668Z,1509677557.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:38.063Z,1509677558.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:38.460Z,1509677558.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:38.855Z,1509677558.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:39.261Z,1509677559.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:39.685Z,1509677559.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:40.111Z,1509677560.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:40.457Z,1509677560.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:40.855Z,1509677560.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:41.307Z,1509677561.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:41.685Z,1509677561.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:42.110Z,1509677562.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:42.490Z,1509677562.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:42.858Z,1509677562.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:43.287Z,1509677563.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:43.668Z,1509677563.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:44.060Z,1509677564.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:44.458Z,1509677564.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:44.857Z,1509677564.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:45.271Z,1509677565.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:45.664Z,1509677565.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:46.071Z,1509677566.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:46.459Z,1509677566.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:46.858Z,1509677566.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:47.275Z,1509677567.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:47.675Z,1509677567.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:48.072Z,1509677568.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:48.459Z,1509677568.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:48.857Z,1509677568.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:49.273Z,1509677569.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:49.665Z,1509677569.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:50.073Z,1509677570.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:50.457Z,1509677570.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:50.860Z,1509677570.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:51.271Z,1509677571.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:51.670Z,1509677571.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:52.099Z,1509677572.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:52.459Z,1509677572.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:52.909Z,1509677572.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:53.264Z,1509677573.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:53.667Z,1509677573.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:54.078Z,1509677574.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:54.507Z,1509677574.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:54.909Z,1509677574.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:55.306Z,1509677575.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:55.666Z,1509677575.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:56.105Z,1509677576.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:56.483Z,1509677576.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:56.860Z,1509677576.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:57.275Z,1509677577.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:57.672Z,1509677577.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:58.068Z,1509677578.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:58.458Z,1509677578.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:58.861Z,1509677578.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:59.272Z,1509677579.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:52:59.668Z,1509677579.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:00.070Z,1509677580.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:00.460Z,1509677580.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:00.859Z,1509677580.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:01.272Z,1509677581.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:01.667Z,1509677581.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:02.069Z,1509677582.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:02.463Z,1509677582.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:02.863Z,1509677582.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:03.268Z,1509677583.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:06.379Z,1509677586.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:06.557Z,1509677586.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:06.921Z,1509677586.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:07.335Z,1509677587.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:07.721Z,1509677587.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:08.123Z,1509677588.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:08.571Z,1509677588.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:08.933Z,1509677588.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:09.339Z,1509677589.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:09.766Z,1509677589.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:10.120Z,1509677590.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:10.561Z,1509677590.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:10.947Z,1509677590.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:11.333Z,1509677591.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:11.733Z,1509677591.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:12.129Z,1509677592.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:12.521Z,1509677592.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:12.921Z,1509677592.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:13.321Z,1509677593.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:13.722Z,1509677593.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:14.120Z,1509677594.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:14.529Z,1509677594.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:14.933Z,1509677594.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:15.339Z,1509677595.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:15.721Z,1509677595.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:16.121Z,1509677596.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:16.523Z,1509677596.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:16.924Z,1509677596.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:17.333Z,1509677597.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:17.739Z,1509677597.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:18.131Z,1509677598.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:18.521Z,1509677598.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:18.931Z,1509677598.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:19.320Z,1509677599.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:19.725Z,1509677599.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:20.121Z,1509677600.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:20.542Z,1509677600.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:20.943Z,1509677600.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:21.334Z,1509677601.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:21.775Z,1509677601.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:22.120Z,1509677602.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:22.523Z,1509677602.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:22.947Z,1509677602.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:23.331Z,1509677603.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:23.739Z,1509677603.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:24.162Z,1509677604.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:24.524Z,1509677604.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:24.963Z,1509677604.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:25.324Z,1509677605.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:25.758Z,1509677605.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:26.123Z,1509677606.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:26.545Z,1509677606.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:26.939Z,1509677606.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:27.331Z,1509677607.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:27.707Z,1509677607.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:28.127Z,1509677608.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:28.512Z,1509677608.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:28.926Z,1509677608.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:29.339Z,1509677609.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:29.739Z,1509677609.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:30.138Z,1509677610.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:30.533Z,1509677610.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:30.931Z,1509677610.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:31.327Z,1509677611.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:31.734Z,1509677611.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:32.135Z,1509677612.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:32.542Z,1509677612.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:32.935Z,1509677612.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:33.334Z,1509677613.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:33.715Z,1509677613.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:34.110Z,1509677614.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:34.511Z,1509677614.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:34.910Z,1509677614.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:35.335Z,1509677615.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:35.735Z,1509677615.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:36.162Z,1509677616.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:36.515Z,1509677616.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:36.910Z,1509677616.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:37.355Z,1509677617.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:37.711Z,1509677617.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:38.110Z,1509677618.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:38.584Z,1509677618.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:38.934Z,1509677618.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:39.367Z,1509677619.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:39.743Z,1509677619.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:40.110Z,1509677620.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:40.535Z,1509677620.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:40.911Z,1509677620.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:41.334Z,1509677621.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:41.734Z,1509677621.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:42.135Z,1509677622.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:42.510Z,1509677622.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:42.935Z,1509677622.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:43.310Z,1509677623.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:43.711Z,1509677623.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:44.110Z,1509677624.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:44.532Z,1509677624.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:44.931Z,1509677624.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:45.331Z,1509677625.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:45.722Z,1509677625.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:46.116Z,1509677626.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:46.521Z,1509677626.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:46.918Z,1509677626.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:47.332Z,1509677627.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:47.732Z,1509677627.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:48.138Z,1509677628.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:48.523Z,1509677628.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:48.923Z,1509677628.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:49.322Z,1509677629.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:49.723Z,1509677629.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:50.125Z,1509677630.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:50.585Z,1509677630.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:50.931Z,1509677630.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:51.333Z,1509677631.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:51.724Z,1509677631.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:52.151Z,1509677632.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:52.528Z,1509677632.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:52.942Z,1509677632.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:53.332Z,1509677633.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:53.772Z,1509677633.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:54.175Z,1509677634.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:54.507Z,1509677634.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:54.911Z,1509677634.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:55.333Z,1509677635.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:55.708Z,1509677635.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:56.133Z,1509677636.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:56.538Z,1509677636.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:56.933Z,1509677636.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:57.339Z,1509677637.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:57.707Z,1509677637.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:58.107Z,1509677638.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:58.512Z,1509677638.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:58.936Z,1509677638.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:59.336Z,1509677639.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:53:59.743Z,1509677639.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:00.142Z,1509677640.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:00.511Z,1509677640.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:00.934Z,1509677640.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:01.335Z,1509677641.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:01.733Z,1509677641.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:02.127Z,1509677642.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:02.539Z,1509677642.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:02.935Z,1509677642.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:03.333Z,1509677643.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:06.478Z,1509677646.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:06.652Z,1509677646.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:07.049Z,1509677647.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:07.482Z,1509677647.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:07.852Z,1509677647.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:08.267Z,1509677648.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:08.663Z,1509677648.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:09.036Z,1509677649.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:09.448Z,1509677649.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:09.854Z,1509677649.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:10.249Z,1509677650.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:10.637Z,1509677650.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:11.038Z,1509677651.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:11.443Z,1509677651.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:11.840Z,1509677651.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:12.239Z,1509677652.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:12.646Z,1509677652.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:13.048Z,1509677653.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:13.454Z,1509677653.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:13.835Z,1509677653.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:14.239Z,1509677654.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:14.641Z,1509677654.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:15.038Z,1509677655.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:15.449Z,1509677655.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:15.853Z,1509677655.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:16.248Z,1509677656.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:16.637Z,1509677656.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:17.039Z,1509677657.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:17.443Z,1509677657.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:17.838Z,1509677657.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:18.237Z,1509677658.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:18.649Z,1509677658.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:19.049Z,1509677659.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:19.476Z,1509677659.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:19.840Z,1509677659.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:20.245Z,1509677660.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:20.659Z,1509677660.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:21.041Z,1509677661.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:21.452Z,1509677661.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:21.875Z,1509677661.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:22.251Z,1509677662.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:22.651Z,1509677662.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:23.059Z,1509677663.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:23.444Z,1509677663.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:23.845Z,1509677663.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:24.246Z,1509677664.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:24.647Z,1509677664.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:25.050Z,1509677665.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:25.454Z,1509677665.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:25.820Z,1509677665.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:26.245Z,1509677666.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:26.647Z,1509677666.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:27.023Z,1509677667.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:27.449Z,1509677667.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:27.846Z,1509677667.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:28.251Z,1509677668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:28.646Z,1509677668.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:29.048Z,1509677669.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:29.427Z,1509677669.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:29.847Z,1509677669.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:30.248Z,1509677670.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:30.650Z,1509677670.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:31.049Z,1509677671.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:31.454Z,1509677671.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:31.827Z,1509677671.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:32.247Z,1509677672.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:32.647Z,1509677672.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:33.046Z,1509677673.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:33.451Z,1509677673.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:33.850Z,1509677673.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:34.275Z,1509677674.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:34.631Z,1509677674.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:35.075Z,1509677675.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:35.427Z,1509677675.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:35.852Z,1509677675.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:36.270Z,1509677676.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:36.649Z,1509677676.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:37.083Z,1509677677.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:37.475Z,1509677677.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:37.831Z,1509677677.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:38.250Z,1509677678.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:38.651Z,1509677678.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:39.027Z,1509677679.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:39.455Z,1509677679.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:39.455Z,1509677679.455 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2017-11-03T02:54:39.455Z,1509677679.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:54:39.457Z,1509677679.457 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:39.457Z,1509677679.457 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2017-11-03T02:54:39.457Z,1509677679.457 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:54:39.459Z,1509677679.459 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:39.459Z,1509677679.459 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2017-11-03T02:54:39.459Z,1509677679.459 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:54:39.533Z,1509677679.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:54:39.533Z,1509677679.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:54:39.533Z,1509677679.533 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:54:39.932Z,1509677679.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:54:39.932Z,1509677679.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2017-11-03T02:54:39.933Z,1509677679.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:54:39.933Z,1509677679.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2017-11-03T02:54:39.933Z,1509677679.933 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:54:39.933Z,1509677679.933 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2017-11-03T02:54:40.254Z,1509677680.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:54:40.254Z,1509677680.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:54:40.255Z,1509677680.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:54:40.255Z,1509677680.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:54:40.255Z,1509677680.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:54:40.256Z,1509677680.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:54:40.256Z,1509677680.256 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:54:40.257Z,1509677680.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:54:40.257Z,1509677680.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:54:40.637Z,1509677680.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:54:40.638Z,1509677680.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:41.042Z,1509677681.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:54:41.043Z,1509677681.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:41.430Z,1509677681.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:54:41.431Z,1509677681.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:41.831Z,1509677681.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:54:41.832Z,1509677681.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:42.234Z,1509677682.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:54:42.235Z,1509677682.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:42.636Z,1509677682.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:54:42.637Z,1509677682.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:43.043Z,1509677683.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:54:43.061Z,1509677683.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:43.444Z,1509677683.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:54:43.461Z,1509677683.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:43.831Z,1509677683.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:54:43.832Z,1509677683.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:44.234Z,1509677684.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:54:44.235Z,1509677684.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:44.635Z,1509677684.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:54:44.637Z,1509677684.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:45.034Z,1509677685.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:54:45.035Z,1509677685.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:45.460Z,1509677685.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:54:45.461Z,1509677685.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:45.896Z,1509677685.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T02:54:45.913Z,1509677685.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:46.248Z,1509677686.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:54:46.265Z,1509677686.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:46.634Z,1509677686.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T02:54:46.635Z,1509677686.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:47.035Z,1509677687.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T02:54:47.036Z,1509677687.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:47.436Z,1509677687.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T02:54:47.437Z,1509677687.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:47.835Z,1509677687.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T02:54:47.836Z,1509677687.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:48.282Z,1509677688.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T02:54:48.283Z,1509677688.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:48.650Z,1509677688.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T02:54:48.651Z,1509677688.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:49.043Z,1509677689.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T02:54:49.045Z,1509677689.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:49.439Z,1509677689.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T02:54:49.440Z,1509677689.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:49.832Z,1509677689.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T02:54:49.833Z,1509677689.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:50.235Z,1509677690.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T02:54:50.237Z,1509677690.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:50.644Z,1509677690.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T02:54:50.645Z,1509677690.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:51.050Z,1509677691.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T02:54:51.051Z,1509677691.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:51.444Z,1509677691.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T02:54:51.445Z,1509677691.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:51.839Z,1509677691.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T02:54:51.840Z,1509677691.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:52.231Z,1509677692.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T02:54:52.232Z,1509677692.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:52.631Z,1509677692.631 [BPC1](ERROR): Failed to receive battery data
2017-11-03T02:54:52.631Z,1509677692.631 [BPC1] Communications Fault, FailCount= 1
2017-11-03T02:54:52.631Z,1509677692.631 [BPC1](ERROR): Communications Fault
2017-11-03T02:54:52.639Z,1509677692.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T02:54:52.640Z,1509677692.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:52.729Z,1509677692.729 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T02:54:53.040Z,1509677693.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T02:54:53.041Z,1509677693.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:53.445Z,1509677693.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T02:54:53.446Z,1509677693.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:53.843Z,1509677693.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T02:54:53.844Z,1509677693.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:53.937Z,1509677693.937 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:54:53.937Z,1509677693.937 [BPC1] No Fault, FailCount= 1
2017-11-03T02:54:54.314Z,1509677694.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T02:54:54.315Z,1509677694.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:54.642Z,1509677694.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T02:54:54.643Z,1509677694.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:55.035Z,1509677695.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T02:54:55.037Z,1509677695.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:55.439Z,1509677695.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T02:54:55.440Z,1509677695.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:55.835Z,1509677695.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T02:54:55.836Z,1509677695.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:56.235Z,1509677696.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T02:54:56.236Z,1509677696.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:56.644Z,1509677696.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T02:54:56.645Z,1509677696.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:57.044Z,1509677697.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T02:54:57.045Z,1509677697.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:57.450Z,1509677697.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T02:54:57.451Z,1509677697.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:57.842Z,1509677697.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T02:54:57.843Z,1509677697.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:58.242Z,1509677698.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T02:54:58.243Z,1509677698.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:58.670Z,1509677698.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T02:54:58.671Z,1509677698.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:59.038Z,1509677699.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T02:54:59.039Z,1509677699.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:59.450Z,1509677699.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T02:54:59.451Z,1509677699.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:54:59.851Z,1509677699.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:00.247Z,1509677700.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:00.633Z,1509677700.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:01.034Z,1509677701.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:01.439Z,1509677701.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:01.840Z,1509677701.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:02.238Z,1509677702.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:02.643Z,1509677702.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:03.044Z,1509677703.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:03.444Z,1509677703.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:03.448Z,1509677703.448 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T02:50:03.1Z
2017-11-03T02:55:03.448Z,1509677703.448 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T02:55:03.448Z,1509677703.448 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T02:55:06.541Z,1509677706.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:06.925Z,1509677706.925 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0064.lzma
2017-11-03T02:55:06.972Z,1509677706.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:07.280Z,1509677707.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:07.619Z,1509677707.619 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0064.lzma.bak
2017-11-03T02:55:07.619Z,1509677707.619 [DataOverHttps](INFO): SBD MOMSN=5182534
2017-11-03T02:55:07.694Z,1509677707.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:08.278Z,1509677708.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:08.470Z,1509677708.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:11.613Z,1509677711.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:11.768Z,1509677711.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:12.181Z,1509677712.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:12.623Z,1509677712.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:12.980Z,1509677712.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:13.423Z,1509677713.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:16.476Z,1509677716.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:16.581Z,1509677716.581 [DataOverHttps](INFO): Sending 224 bytes from file Logs/20171103T001125/Express0065.lzma
2017-11-03T02:55:16.651Z,1509677716.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:17.036Z,1509677717.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:17.379Z,1509677717.379 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0065.lzma.bak
2017-11-03T02:55:17.379Z,1509677717.379 [DataOverHttps](INFO): SBD MOMSN=5182536
2017-11-03T02:55:17.452Z,1509677717.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:18.034Z,1509677718.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:18.038Z,1509677718.038 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T02:55:18.038Z,1509677718.038 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T02:55:18.038Z,1509677718.038 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T02:55:18.235Z,1509677718.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:21.341Z,1509677721.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:21.499Z,1509677721.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:21.891Z,1509677721.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:22.295Z,1509677722.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:22.688Z,1509677722.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:23.080Z,1509677723.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:23.482Z,1509677723.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:23.886Z,1509677723.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:24.240Z,1509677724.240 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T02:55:24.240Z,1509677724.240 [NAL9602] Data Fault, FailCount= 5
2017-11-03T02:55:24.240Z,1509677724.240 [NAL9602](ERROR): Data Fault
2017-11-03T02:55:24.300Z,1509677724.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:24.385Z,1509677724.385 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T02:55:24.385Z,1509677724.385 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T02:55:24.642Z,1509677724.642 [NAL9602](INFO): Powering down
2017-11-03T02:55:24.691Z,1509677724.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:24.771Z,1509677724.771 [CBIT](INFO): Critical error at 20171103T025524
2017-11-03T02:55:25.081Z,1509677725.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:25.482Z,1509677725.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:25.883Z,1509677725.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:26.287Z,1509677726.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:26.683Z,1509677726.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:27.111Z,1509677727.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:27.483Z,1509677727.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:27.884Z,1509677727.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:28.311Z,1509677728.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:28.666Z,1509677728.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:29.089Z,1509677729.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:29.503Z,1509677729.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:29.888Z,1509677729.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:30.299Z,1509677730.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:30.687Z,1509677730.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:31.111Z,1509677731.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:31.470Z,1509677731.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:31.871Z,1509677731.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:32.270Z,1509677732.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:32.683Z,1509677732.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:33.071Z,1509677733.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:33.489Z,1509677733.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:33.887Z,1509677733.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:34.271Z,1509677734.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:34.689Z,1509677734.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:35.081Z,1509677735.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:35.471Z,1509677735.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:35.883Z,1509677735.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:36.281Z,1509677736.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:36.671Z,1509677736.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:37.090Z,1509677737.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:37.491Z,1509677737.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:37.893Z,1509677737.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:38.270Z,1509677738.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:38.671Z,1509677738.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:39.071Z,1509677739.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:39.470Z,1509677739.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:39.871Z,1509677739.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:40.271Z,1509677740.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:40.674Z,1509677740.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:41.071Z,1509677741.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:41.513Z,1509677741.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:41.873Z,1509677741.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:42.298Z,1509677742.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:42.670Z,1509677742.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:43.107Z,1509677743.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:43.470Z,1509677743.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:43.870Z,1509677743.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:44.303Z,1509677744.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:44.670Z,1509677744.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:45.098Z,1509677745.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:45.510Z,1509677745.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:45.870Z,1509677745.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:46.270Z,1509677746.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:46.672Z,1509677746.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:47.070Z,1509677747.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:47.471Z,1509677747.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:47.873Z,1509677747.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:48.270Z,1509677748.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:48.665Z,1509677748.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:49.073Z,1509677749.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:49.470Z,1509677749.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:49.866Z,1509677749.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:50.273Z,1509677750.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:50.679Z,1509677750.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:51.065Z,1509677751.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:51.546Z,1509677751.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:51.870Z,1509677751.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:52.266Z,1509677752.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:52.683Z,1509677752.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:53.110Z,1509677753.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:53.502Z,1509677753.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:53.896Z,1509677753.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:54.304Z,1509677754.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:54.704Z,1509677754.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:55.087Z,1509677755.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:55.478Z,1509677755.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:55.908Z,1509677755.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:56.327Z,1509677756.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:56.676Z,1509677756.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:57.088Z,1509677757.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:57.531Z,1509677757.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:57.887Z,1509677757.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:58.318Z,1509677758.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:58.718Z,1509677758.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:59.117Z,1509677759.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:59.511Z,1509677759.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:55:59.923Z,1509677759.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:00.322Z,1509677760.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:00.718Z,1509677760.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:01.127Z,1509677761.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:01.487Z,1509677761.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:01.894Z,1509677761.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:02.295Z,1509677762.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:02.683Z,1509677762.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:03.095Z,1509677763.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:03.484Z,1509677763.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:03.898Z,1509677763.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:04.326Z,1509677764.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:04.698Z,1509677764.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:05.092Z,1509677765.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:05.543Z,1509677765.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:05.907Z,1509677765.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:06.288Z,1509677766.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:06.665Z,1509677766.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:07.088Z,1509677767.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:07.483Z,1509677767.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:07.894Z,1509677767.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:08.289Z,1509677768.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:08.691Z,1509677768.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:09.090Z,1509677769.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:09.490Z,1509677769.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:09.888Z,1509677769.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:10.271Z,1509677770.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:10.691Z,1509677770.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:11.096Z,1509677771.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:11.474Z,1509677771.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:11.914Z,1509677771.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:12.279Z,1509677772.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:12.699Z,1509677772.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:13.070Z,1509677773.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:13.506Z,1509677773.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:13.912Z,1509677773.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:14.271Z,1509677774.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:14.679Z,1509677774.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:15.071Z,1509677775.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:15.470Z,1509677775.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:15.879Z,1509677775.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:16.270Z,1509677776.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:16.670Z,1509677776.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:17.099Z,1509677777.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:17.477Z,1509677777.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:17.878Z,1509677777.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:18.276Z,1509677778.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:18.673Z,1509677778.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:21.799Z,1509677781.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:21.958Z,1509677781.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:22.341Z,1509677782.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:22.737Z,1509677782.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:23.139Z,1509677783.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:23.537Z,1509677783.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:23.942Z,1509677783.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:24.340Z,1509677784.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:24.763Z,1509677784.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:25.141Z,1509677785.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:25.539Z,1509677785.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:25.960Z,1509677785.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:26.339Z,1509677786.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:26.747Z,1509677786.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:27.163Z,1509677787.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:27.547Z,1509677787.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:27.971Z,1509677787.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:28.342Z,1509677788.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:28.766Z,1509677788.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:29.147Z,1509677789.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:29.539Z,1509677789.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:29.935Z,1509677789.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:30.343Z,1509677790.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:30.774Z,1509677790.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:31.134Z,1509677791.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:31.554Z,1509677791.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:31.922Z,1509677791.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:31.942Z,1509677791.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:32.319Z,1509677792.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:32.335Z,1509677792.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:32.723Z,1509677792.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:32.747Z,1509677792.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:33.150Z,1509677793.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:33.543Z,1509677793.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:33.951Z,1509677793.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:34.337Z,1509677794.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:34.737Z,1509677794.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:35.151Z,1509677795.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:35.536Z,1509677795.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:35.937Z,1509677795.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:36.347Z,1509677796.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:36.745Z,1509677796.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:37.143Z,1509677797.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:37.547Z,1509677797.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:37.946Z,1509677797.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:38.337Z,1509677798.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:38.751Z,1509677798.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:39.137Z,1509677799.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:39.586Z,1509677799.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:39.945Z,1509677799.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:40.345Z,1509677800.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:40.799Z,1509677800.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:41.145Z,1509677801.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:41.533Z,1509677801.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:41.580Z,1509677801.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:41.932Z,1509677801.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:41.947Z,1509677801.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:42.333Z,1509677802.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:42.390Z,1509677802.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:42.732Z,1509677802.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:42.780Z,1509677802.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:43.127Z,1509677803.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:43.142Z,1509677803.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:43.532Z,1509677803.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:43.547Z,1509677803.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:43.932Z,1509677803.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:43.947Z,1509677803.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:44.333Z,1509677804.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:44.348Z,1509677804.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:44.731Z,1509677804.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T02:56:44.746Z,1509677804.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:45.141Z,1509677805.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:45.547Z,1509677805.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:45.946Z,1509677805.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:46.341Z,1509677806.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:46.741Z,1509677806.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:47.146Z,1509677807.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:47.542Z,1509677807.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:47.947Z,1509677807.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:48.346Z,1509677808.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:48.741Z,1509677808.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:49.147Z,1509677809.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:49.546Z,1509677809.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:49.947Z,1509677809.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:50.347Z,1509677810.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:50.748Z,1509677810.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:51.147Z,1509677811.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:51.547Z,1509677811.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:51.948Z,1509677811.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:52.347Z,1509677812.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:52.741Z,1509677812.741 [BPC1](ERROR): Failed to parse message.
2017-11-03T02:56:52.741Z,1509677812.741 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T02:56:52.741Z,1509677812.741 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:56:52.741Z,1509677812.741 [BPC1](ERROR): Data Fault
2017-11-03T02:56:52.749Z,1509677812.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:52.826Z,1509677812.826 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:56:53.149Z,1509677813.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:53.541Z,1509677813.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:53.941Z,1509677813.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:54.034Z,1509677814.034 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:56:54.034Z,1509677814.034 [BPC1] No Fault, FailCount= 1
2017-11-03T02:56:54.403Z,1509677814.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:54.748Z,1509677814.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:55.149Z,1509677815.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:55.548Z,1509677815.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:55.983Z,1509677815.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:56.343Z,1509677816.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:56.749Z,1509677816.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:57.145Z,1509677817.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:57.550Z,1509677817.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:57.947Z,1509677817.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:58.344Z,1509677818.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:58.745Z,1509677818.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:59.147Z,1509677819.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:59.544Z,1509677819.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:56:59.949Z,1509677819.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:00.351Z,1509677820.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:00.749Z,1509677820.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:01.143Z,1509677821.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:01.545Z,1509677821.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:01.944Z,1509677821.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:02.346Z,1509677822.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:02.747Z,1509677822.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:03.149Z,1509677823.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:03.551Z,1509677823.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:03.948Z,1509677823.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:04.349Z,1509677824.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:04.747Z,1509677824.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:05.154Z,1509677825.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:05.545Z,1509677825.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:05.948Z,1509677825.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:06.358Z,1509677826.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:06.767Z,1509677826.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:07.149Z,1509677827.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:07.586Z,1509677827.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:07.944Z,1509677827.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:08.344Z,1509677828.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:08.771Z,1509677828.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:09.143Z,1509677829.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:09.592Z,1509677829.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:09.975Z,1509677829.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:10.348Z,1509677830.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:10.742Z,1509677830.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:11.155Z,1509677831.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:11.548Z,1509677831.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:11.948Z,1509677831.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:12.348Z,1509677832.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:12.748Z,1509677832.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:13.143Z,1509677833.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:13.546Z,1509677833.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:13.948Z,1509677833.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:14.348Z,1509677834.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:14.754Z,1509677834.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:15.174Z,1509677835.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:15.550Z,1509677835.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:15.950Z,1509677835.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:16.347Z,1509677836.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:16.746Z,1509677836.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:17.149Z,1509677837.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:17.553Z,1509677837.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:17.952Z,1509677837.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:18.358Z,1509677838.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:18.751Z,1509677838.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:21.863Z,1509677841.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:22.027Z,1509677842.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:22.451Z,1509677842.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:22.802Z,1509677842.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:23.203Z,1509677843.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:23.627Z,1509677843.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:24.006Z,1509677844.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:24.430Z,1509677844.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:24.543Z,1509677844.543 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T02:57:24.543Z,1509677844.543 [NAL9602] No Fault, FailCount= 5
2017-11-03T02:57:24.762Z,1509677844.762 [NAL9602](INFO): Powering up NAL9602
2017-11-03T02:57:24.831Z,1509677844.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:25.205Z,1509677845.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:25.610Z,1509677845.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:26.005Z,1509677846.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:26.404Z,1509677846.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:26.814Z,1509677846.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:27.209Z,1509677847.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:27.602Z,1509677847.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:28.010Z,1509677848.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:28.407Z,1509677848.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:28.808Z,1509677848.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:29.210Z,1509677849.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:29.605Z,1509677849.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:30.011Z,1509677850.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:30.410Z,1509677850.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:30.805Z,1509677850.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:31.204Z,1509677851.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:31.614Z,1509677851.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:32.009Z,1509677852.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:32.402Z,1509677852.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:32.806Z,1509677852.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:33.207Z,1509677853.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:33.610Z,1509677853.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:34.012Z,1509677854.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:34.416Z,1509677854.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:34.809Z,1509677854.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:35.222Z,1509677855.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:35.566Z,1509677855.566 [NAL9602](INFO): NAL9602 initialized
2017-11-03T02:57:35.634Z,1509677855.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:36.004Z,1509677856.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:36.420Z,1509677856.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:36.887Z,1509677856.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:37.234Z,1509677857.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:37.615Z,1509677857.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:37.701Z,1509677857.701 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:57:37.701Z,1509677857.701 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T02:57:37.964Z,1509677857.964 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:57:37.965Z,1509677857.965 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:57:37.965Z,1509677857.965 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:57:37.965Z,1509677857.965 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:57:38.038Z,1509677858.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:38.417Z,1509677858.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:38.823Z,1509677858.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:39.228Z,1509677859.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:39.620Z,1509677859.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:40.022Z,1509677860.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:40.439Z,1509677860.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:40.439Z,1509677860.439 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2017-11-03T02:57:40.439Z,1509677860.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T02:57:40.464Z,1509677860.464 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:40.464Z,1509677860.464 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2017-11-03T02:57:40.465Z,1509677860.464 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T02:57:40.466Z,1509677860.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:40.466Z,1509677860.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2017-11-03T02:57:40.467Z,1509677860.467 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T02:57:40.556Z,1509677860.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T02:57:40.557Z,1509677860.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T02:57:40.557Z,1509677860.557 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T02:57:40.898Z,1509677860.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T02:57:40.898Z,1509677860.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2017-11-03T02:57:40.898Z,1509677860.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T02:57:40.898Z,1509677860.898 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2017-11-03T02:57:40.899Z,1509677860.899 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T02:57:40.899Z,1509677860.899 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2017-11-03T02:57:41.218Z,1509677861.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T02:57:41.218Z,1509677861.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:57:41.218Z,1509677861.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:57:41.219Z,1509677861.219 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T02:57:41.219Z,1509677861.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:57:41.219Z,1509677861.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:57:41.220Z,1509677861.220 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T02:57:41.220Z,1509677861.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T02:57:41.221Z,1509677861.221 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T02:57:41.614Z,1509677861.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:57:41.615Z,1509677861.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:41.994Z,1509677861.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:57:41.995Z,1509677861.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:42.154Z,1509677862.154 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:57:42.211Z,1509677862.211 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:57:42.212Z,1509677862.212 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:57:42.213Z,1509677862.213 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:57:42.214Z,1509677862.214 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:57:42.468Z,1509677862.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:57:42.470Z,1509677862.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:42.836Z,1509677862.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:43.217Z,1509677863.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:43.623Z,1509677863.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:44.009Z,1509677864.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:44.418Z,1509677864.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:44.811Z,1509677864.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:45.214Z,1509677865.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:45.622Z,1509677865.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:46.088Z,1509677866.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:46.422Z,1509677866.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:46.815Z,1509677866.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:47.205Z,1509677867.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:47.596Z,1509677867.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:48.085Z,1509677868.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:48.430Z,1509677868.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:48.828Z,1509677868.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:49.224Z,1509677869.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:49.626Z,1509677869.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:50.069Z,1509677870.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:50.399Z,1509677870.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:50.796Z,1509677870.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:51.259Z,1509677871.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:51.610Z,1509677871.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:52.063Z,1509677872.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:52.462Z,1509677872.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:52.823Z,1509677872.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:53.241Z,1509677873.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:53.650Z,1509677873.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:54.011Z,1509677874.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:54.431Z,1509677874.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:54.840Z,1509677874.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:55.224Z,1509677875.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:55.607Z,1509677875.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:55.997Z,1509677875.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:56.401Z,1509677876.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:56.795Z,1509677876.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:57.199Z,1509677877.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:57.620Z,1509677877.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:58.042Z,1509677878.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:58.430Z,1509677878.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:58.798Z,1509677878.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:59.206Z,1509677879.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:59.599Z,1509677879.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:57:59.999Z,1509677879.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:00.427Z,1509677880.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:00.831Z,1509677880.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:01.235Z,1509677881.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:01.599Z,1509677881.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:02.080Z,1509677882.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:02.425Z,1509677882.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:02.804Z,1509677882.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:03.207Z,1509677883.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:03.614Z,1509677883.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:04.072Z,1509677884.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:04.444Z,1509677884.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:04.805Z,1509677884.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:05.214Z,1509677885.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:05.678Z,1509677885.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:06.059Z,1509677886.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:06.435Z,1509677886.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:06.859Z,1509677886.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:07.216Z,1509677887.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:07.650Z,1509677887.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:08.103Z,1509677888.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:08.406Z,1509677888.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:08.813Z,1509677888.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:09.230Z,1509677889.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:09.626Z,1509677889.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:10.021Z,1509677890.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:10.417Z,1509677890.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:10.823Z,1509677890.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:11.205Z,1509677891.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:11.610Z,1509677891.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:12.011Z,1509677892.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:12.423Z,1509677892.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:12.812Z,1509677892.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:13.221Z,1509677893.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:13.611Z,1509677893.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:14.011Z,1509677894.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:14.411Z,1509677894.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:14.805Z,1509677894.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:15.213Z,1509677895.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:15.647Z,1509677895.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:16.080Z,1509677896.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:16.449Z,1509677896.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:16.827Z,1509677896.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:17.216Z,1509677897.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:17.627Z,1509677897.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:18.073Z,1509677898.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:18.424Z,1509677898.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:18.837Z,1509677898.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:22.195Z,1509677902.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:22.362Z,1509677902.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:22.743Z,1509677902.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:23.182Z,1509677903.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:23.556Z,1509677903.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:23.980Z,1509677903.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:24.363Z,1509677904.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:24.782Z,1509677904.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:25.141Z,1509677905.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:25.545Z,1509677905.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:25.947Z,1509677905.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:26.354Z,1509677906.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:26.749Z,1509677906.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:27.152Z,1509677907.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:27.543Z,1509677907.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:27.939Z,1509677907.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:28.352Z,1509677908.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:28.759Z,1509677908.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:29.155Z,1509677909.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:29.548Z,1509677909.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:29.927Z,1509677909.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:30.340Z,1509677910.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:30.761Z,1509677910.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:31.163Z,1509677911.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:31.535Z,1509677911.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:31.935Z,1509677911.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:32.370Z,1509677912.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:32.752Z,1509677912.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:33.144Z,1509677913.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:33.546Z,1509677913.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:33.939Z,1509677913.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:34.373Z,1509677914.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:34.754Z,1509677914.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:35.148Z,1509677915.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:35.540Z,1509677915.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:35.941Z,1509677915.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:36.395Z,1509677916.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:36.794Z,1509677916.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:37.150Z,1509677917.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:37.575Z,1509677917.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:37.947Z,1509677917.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:38.398Z,1509677918.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:38.782Z,1509677918.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:39.223Z,1509677919.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:39.542Z,1509677919.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:39.943Z,1509677919.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:40.351Z,1509677920.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:40.750Z,1509677920.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:41.147Z,1509677921.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:41.540Z,1509677921.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:41.947Z,1509677921.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:42.347Z,1509677922.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:42.751Z,1509677922.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:43.147Z,1509677923.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:43.541Z,1509677923.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:43.947Z,1509677923.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:44.352Z,1509677924.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:44.757Z,1509677924.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:45.152Z,1509677925.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:45.527Z,1509677925.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:45.949Z,1509677925.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:46.360Z,1509677926.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:46.764Z,1509677926.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:47.164Z,1509677927.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:47.536Z,1509677927.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:47.934Z,1509677927.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:48.345Z,1509677928.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:48.745Z,1509677928.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:49.144Z,1509677929.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:49.547Z,1509677929.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:49.939Z,1509677929.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:50.373Z,1509677930.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:50.802Z,1509677930.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:51.202Z,1509677931.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:51.550Z,1509677931.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:51.982Z,1509677931.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:52.367Z,1509677932.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:52.791Z,1509677932.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:53.187Z,1509677933.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:53.543Z,1509677933.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:53.947Z,1509677933.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:54.353Z,1509677934.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:54.757Z,1509677934.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:55.152Z,1509677935.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:55.543Z,1509677935.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:55.947Z,1509677935.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:56.358Z,1509677936.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:56.753Z,1509677936.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:57.163Z,1509677937.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:57.541Z,1509677937.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:57.943Z,1509677937.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:58.359Z,1509677938.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:58.753Z,1509677938.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:59.150Z,1509677939.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:59.543Z,1509677939.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:58:59.944Z,1509677939.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:00.361Z,1509677940.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:00.757Z,1509677940.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:01.162Z,1509677941.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:01.540Z,1509677941.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:01.939Z,1509677941.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:02.367Z,1509677942.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:02.761Z,1509677942.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:03.157Z,1509677943.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:03.536Z,1509677943.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:03.931Z,1509677943.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:04.363Z,1509677944.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:04.761Z,1509677944.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:05.187Z,1509677945.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:05.582Z,1509677945.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:05.935Z,1509677945.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:06.410Z,1509677946.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:06.764Z,1509677946.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:07.186Z,1509677947.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:07.571Z,1509677947.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:07.939Z,1509677947.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:08.365Z,1509677948.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:08.747Z,1509677948.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:09.153Z,1509677949.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:09.549Z,1509677949.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:09.931Z,1509677949.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:10.355Z,1509677950.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:10.762Z,1509677950.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:11.144Z,1509677951.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:11.558Z,1509677951.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:11.930Z,1509677951.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:12.348Z,1509677952.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:12.752Z,1509677952.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:13.152Z,1509677953.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:13.544Z,1509677953.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:13.949Z,1509677953.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:14.357Z,1509677954.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:14.755Z,1509677954.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:15.152Z,1509677955.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:15.548Z,1509677955.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:15.953Z,1509677955.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:16.355Z,1509677956.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:16.755Z,1509677956.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:17.156Z,1509677957.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:17.531Z,1509677957.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:17.939Z,1509677957.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:18.358Z,1509677958.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:18.750Z,1509677958.750 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T02:59:18.750Z,1509677958.750 [BPC1] Data Fault, FailCount= 1
2017-11-03T02:59:18.750Z,1509677958.750 [BPC1](ERROR): Data Fault
2017-11-03T02:59:18.763Z,1509677958.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:18.856Z,1509677958.856 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T02:59:19.162Z,1509677959.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:22.358Z,1509677962.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:22.601Z,1509677962.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:22.685Z,1509677962.685 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T02:59:22.685Z,1509677962.685 [BPC1] No Fault, FailCount= 1
2017-11-03T02:59:22.983Z,1509677962.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:23.367Z,1509677963.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:23.735Z,1509677963.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:24.123Z,1509677964.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:24.592Z,1509677964.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:24.918Z,1509677964.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:25.318Z,1509677965.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:25.725Z,1509677965.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:26.128Z,1509677966.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:26.527Z,1509677966.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:26.915Z,1509677966.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:27.323Z,1509677967.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:27.723Z,1509677967.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:28.121Z,1509677968.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:28.530Z,1509677968.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:28.927Z,1509677968.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:29.326Z,1509677969.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:29.721Z,1509677969.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:30.121Z,1509677970.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:30.521Z,1509677970.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:30.919Z,1509677970.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:31.364Z,1509677971.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:31.731Z,1509677971.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:32.147Z,1509677972.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:32.535Z,1509677972.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:32.921Z,1509677972.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:33.321Z,1509677973.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:33.721Z,1509677973.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:34.121Z,1509677974.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:34.531Z,1509677974.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:34.982Z,1509677974.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:35.374Z,1509677975.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:35.721Z,1509677975.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:36.122Z,1509677976.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:36.591Z,1509677976.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:36.919Z,1509677976.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:37.363Z,1509677977.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:37.765Z,1509677977.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:38.128Z,1509677978.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:38.172Z,1509677978.172 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T02:59:38.173Z,1509677978.173 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T02:59:38.173Z,1509677978.173 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T02:59:38.209Z,1509677978.209 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T02:59:38.577Z,1509677978.577 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T02:59:38.632Z,1509677978.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T02:59:38.633Z,1509677978.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:38.773Z,1509677978.773 [Rowe_600LCM](INFO): Powering down
2017-11-03T02:59:38.922Z,1509677978.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T02:59:38.923Z,1509677978.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:39.307Z,1509677979.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T02:59:39.324Z,1509677979.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:39.707Z,1509677979.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T02:59:39.709Z,1509677979.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:40.107Z,1509677980.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T02:59:40.108Z,1509677980.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:40.205Z,1509677980.205 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T02:59:40.205Z,1509677980.205 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T02:59:40.388Z,1509677980.388 [Rowe_600LCM](INFO): Initializing
2017-11-03T02:59:40.389Z,1509677980.389 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T02:59:40.389Z,1509677980.389 [Rowe_600LCM](INFO): LCM OK
2017-11-03T02:59:40.389Z,1509677980.389 [Rowe_600LCM](INFO): Powering up
2017-11-03T02:59:40.537Z,1509677980.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T02:59:40.538Z,1509677980.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:40.938Z,1509677980.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T02:59:40.939Z,1509677980.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:41.333Z,1509677981.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T02:59:41.334Z,1509677981.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:41.710Z,1509677981.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T02:59:41.711Z,1509677981.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:42.107Z,1509677982.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T02:59:42.108Z,1509677982.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:42.507Z,1509677982.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T02:59:42.509Z,1509677982.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:42.907Z,1509677982.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T02:59:42.909Z,1509677982.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:43.306Z,1509677983.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T02:59:43.307Z,1509677983.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:43.730Z,1509677983.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T02:59:43.731Z,1509677983.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:44.130Z,1509677984.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T02:59:44.131Z,1509677984.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:44.578Z,1509677984.578 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T02:59:44.605Z,1509677984.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T02:59:44.631Z,1509677984.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:44.691Z,1509677984.691 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T02:59:44.692Z,1509677984.692 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T02:59:44.693Z,1509677984.693 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T02:59:44.693Z,1509677984.693 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T02:59:44.909Z,1509677984.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T02:59:44.910Z,1509677984.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:45.309Z,1509677985.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:45.713Z,1509677985.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:46.111Z,1509677986.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:46.536Z,1509677986.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:46.936Z,1509677986.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:47.337Z,1509677987.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:47.707Z,1509677987.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:48.138Z,1509677988.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:48.508Z,1509677988.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:48.938Z,1509677988.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:49.313Z,1509677989.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:49.814Z,1509677989.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:50.148Z,1509677990.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:50.547Z,1509677990.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:50.907Z,1509677990.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:51.347Z,1509677991.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:51.714Z,1509677991.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:52.155Z,1509677992.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:52.539Z,1509677992.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:52.940Z,1509677992.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:53.337Z,1509677993.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:53.719Z,1509677993.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:54.139Z,1509677994.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:54.511Z,1509677994.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:54.911Z,1509677994.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:55.314Z,1509677995.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:55.738Z,1509677995.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:56.199Z,1509677996.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:56.522Z,1509677996.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:56.916Z,1509677996.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:57.315Z,1509677997.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:57.716Z,1509677997.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:58.115Z,1509677998.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:58.522Z,1509677998.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:58.922Z,1509677998.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:59.321Z,1509677999.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T02:59:59.719Z,1509677999.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:00.114Z,1509678000.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:00.570Z,1509678000.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:00.915Z,1509678000.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:01.313Z,1509678001.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:01.725Z,1509678001.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:02.148Z,1509678002.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:02.579Z,1509678002.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:02.919Z,1509678002.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:03.315Z,1509678003.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:03.763Z,1509678003.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:04.139Z,1509678004.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:04.527Z,1509678004.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:04.974Z,1509678004.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:05.333Z,1509678005.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:05.747Z,1509678005.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:06.115Z,1509678006.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:06.543Z,1509678006.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:06.918Z,1509678006.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:07.323Z,1509678007.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:07.733Z,1509678007.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:08.135Z,1509678008.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:08.535Z,1509678008.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:08.915Z,1509678008.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:09.321Z,1509678009.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:09.721Z,1509678009.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:10.131Z,1509678010.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:10.532Z,1509678010.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:10.933Z,1509678010.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:11.329Z,1509678011.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:11.719Z,1509678011.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:12.122Z,1509678012.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:12.518Z,1509678012.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:12.926Z,1509678012.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:13.327Z,1509678013.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:13.732Z,1509678013.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:14.135Z,1509678014.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:14.598Z,1509678014.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:14.907Z,1509678014.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:15.326Z,1509678015.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:15.708Z,1509678015.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:16.126Z,1509678016.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:16.589Z,1509678016.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:16.939Z,1509678016.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:17.377Z,1509678017.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:17.735Z,1509678017.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:18.195Z,1509678018.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:18.511Z,1509678018.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:18.514Z,1509678018.514 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T03:00:18.515Z,1509678018.515 [Default:CheckIn:C.Wait] Stopped
2017-11-03T03:00:18.515Z,1509678018.515 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T03:00:18.515Z,1509678018.515 [Default:CheckIn:D] Running Loop=1
2017-11-03T03:00:18.913Z,1509678018.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:18.917Z,1509678018.917 [Default:CheckIn:D] Stopped
2017-11-03T03:00:18.917Z,1509678018.917 [Default:CheckIn:E] Running Loop=1
2017-11-03T03:00:19.346Z,1509678019.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:19.350Z,1509678019.350 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.189160 min 
2017-11-03T03:00:19.350Z,1509678019.350 [Default:CheckIn:E] Stopped
2017-11-03T03:00:19.350Z,1509678019.350 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T03:00:19.350Z,1509678019.350 [Default:CheckIn] Stopped
2017-11-03T03:00:19.350Z,1509678019.350 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T03:00:19.350Z,1509678019.350 [Default:CheckIn](INFO): Running loop #17
2017-11-03T03:00:19.351Z,1509678019.351 [Default:CheckIn] Running Loop=17
2017-11-03T03:00:19.351Z,1509678019.351 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T03:00:19.351Z,1509678019.351 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T03:00:22.593Z,1509678022.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:22.811Z,1509678022.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:23.203Z,1509678023.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:23.572Z,1509678023.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:23.945Z,1509678023.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:24.352Z,1509678024.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:24.761Z,1509678024.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:25.163Z,1509678025.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:25.551Z,1509678025.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:25.947Z,1509678025.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:26.361Z,1509678026.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:26.763Z,1509678026.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:27.153Z,1509678027.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:27.546Z,1509678027.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:27.945Z,1509678027.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:28.354Z,1509678028.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:28.763Z,1509678028.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:29.163Z,1509678029.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:29.548Z,1509678029.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:29.947Z,1509678029.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:30.349Z,1509678030.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:30.749Z,1509678030.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:31.149Z,1509678031.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:31.543Z,1509678031.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:31.943Z,1509678031.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:32.352Z,1509678032.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:32.755Z,1509678032.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:33.155Z,1509678033.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:33.545Z,1509678033.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:33.943Z,1509678033.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:34.358Z,1509678034.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:34.813Z,1509678034.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:35.199Z,1509678035.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:35.548Z,1509678035.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:35.953Z,1509678035.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:36.375Z,1509678036.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:36.762Z,1509678036.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:37.200Z,1509678037.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:37.579Z,1509678037.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:37.935Z,1509678037.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:38.363Z,1509678038.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:38.767Z,1509678038.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:39.161Z,1509678039.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:39.536Z,1509678039.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:39.959Z,1509678039.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:40.364Z,1509678040.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:40.774Z,1509678040.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:41.171Z,1509678041.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:41.540Z,1509678041.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:41.541Z,1509678041.541 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2017-11-03T03:00:41.541Z,1509678041.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:00:41.542Z,1509678041.542 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:41.542Z,1509678041.542 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2017-11-03T03:00:41.543Z,1509678041.543 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:00:41.545Z,1509678041.545 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:41.545Z,1509678041.545 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2017-11-03T03:00:41.545Z,1509678041.545 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:00:41.653Z,1509678041.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:00:41.653Z,1509678041.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:00:41.653Z,1509678041.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:00:42.020Z,1509678042.020 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:00:42.020Z,1509678042.020 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2017-11-03T03:00:42.021Z,1509678042.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:00:42.021Z,1509678042.021 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2017-11-03T03:00:42.021Z,1509678042.021 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:00:42.021Z,1509678042.021 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2017-11-03T03:00:42.364Z,1509678042.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:00:42.364Z,1509678042.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:00:42.377Z,1509678042.377 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:00:42.377Z,1509678042.377 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:00:42.377Z,1509678042.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:00:42.378Z,1509678042.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:00:42.378Z,1509678042.378 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:00:42.379Z,1509678042.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:00:42.379Z,1509678042.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:00:42.752Z,1509678042.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:43.156Z,1509678043.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:43.545Z,1509678043.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:43.943Z,1509678043.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:44.357Z,1509678044.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:44.757Z,1509678044.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:45.161Z,1509678045.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:45.548Z,1509678045.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:45.950Z,1509678045.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:46.355Z,1509678046.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:46.757Z,1509678046.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:47.159Z,1509678047.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:47.553Z,1509678047.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:47.989Z,1509678047.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:48.361Z,1509678048.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:48.763Z,1509678048.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:49.163Z,1509678049.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:49.571Z,1509678049.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:49.939Z,1509678049.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:50.408Z,1509678050.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:50.760Z,1509678050.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:51.194Z,1509678051.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:51.545Z,1509678051.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:51.955Z,1509678051.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:52.394Z,1509678052.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:52.763Z,1509678052.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:53.161Z,1509678053.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:53.556Z,1509678053.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:53.972Z,1509678053.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:54.402Z,1509678054.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:54.773Z,1509678054.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:55.179Z,1509678055.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:55.577Z,1509678055.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:55.976Z,1509678055.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:56.395Z,1509678056.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:56.744Z,1509678056.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:57.179Z,1509678057.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:57.577Z,1509678057.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:57.957Z,1509678057.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:58.368Z,1509678058.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:58.779Z,1509678058.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:59.206Z,1509678059.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:00:59.563Z,1509678059.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:00.029Z,1509678060.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:00.378Z,1509678060.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:00.804Z,1509678060.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:01.197Z,1509678061.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:01.607Z,1509678061.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:01.995Z,1509678061.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:02.359Z,1509678062.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:02.801Z,1509678062.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:03.246Z,1509678063.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:03.555Z,1509678063.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:04.045Z,1509678064.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:04.419Z,1509678064.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:04.771Z,1509678064.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:05.198Z,1509678065.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:05.576Z,1509678065.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:05.975Z,1509678065.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:06.387Z,1509678066.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:06.760Z,1509678066.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:07.163Z,1509678067.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:07.547Z,1509678067.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:07.951Z,1509678067.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:08.356Z,1509678068.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:08.766Z,1509678068.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:09.163Z,1509678069.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:09.545Z,1509678069.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:09.945Z,1509678069.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:10.360Z,1509678070.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:10.767Z,1509678070.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:11.163Z,1509678071.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:11.546Z,1509678071.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:11.944Z,1509678071.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:12.351Z,1509678072.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:12.757Z,1509678072.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:13.163Z,1509678073.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:13.546Z,1509678073.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:13.945Z,1509678073.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:14.365Z,1509678074.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:14.809Z,1509678074.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:15.161Z,1509678075.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:15.547Z,1509678075.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:15.954Z,1509678075.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:16.361Z,1509678076.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:16.763Z,1509678076.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:17.163Z,1509678077.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:17.553Z,1509678077.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:17.952Z,1509678077.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:18.384Z,1509678078.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:18.784Z,1509678078.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:19.163Z,1509678079.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:19.538Z,1509678079.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:22.743Z,1509678082.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:22.904Z,1509678082.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:23.335Z,1509678083.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:23.739Z,1509678083.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:24.099Z,1509678084.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:24.500Z,1509678084.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:24.893Z,1509678084.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:25.294Z,1509678085.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:25.704Z,1509678085.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:26.108Z,1509678086.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:26.516Z,1509678086.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:26.984Z,1509678086.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:27.299Z,1509678087.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:27.692Z,1509678087.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:28.120Z,1509678088.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:28.516Z,1509678088.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:28.913Z,1509678088.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:29.307Z,1509678089.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:29.706Z,1509678089.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:30.110Z,1509678090.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:30.502Z,1509678090.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:30.901Z,1509678090.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:31.303Z,1509678091.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:31.711Z,1509678091.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:32.138Z,1509678092.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:32.504Z,1509678092.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:32.899Z,1509678092.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:33.309Z,1509678093.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:33.701Z,1509678093.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:34.157Z,1509678094.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:34.512Z,1509678094.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:34.915Z,1509678094.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:35.312Z,1509678095.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:35.751Z,1509678095.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:36.107Z,1509678096.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:36.515Z,1509678096.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:36.941Z,1509678096.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:37.301Z,1509678097.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:37.754Z,1509678097.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:38.150Z,1509678098.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:38.573Z,1509678098.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:38.909Z,1509678098.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:39.288Z,1509678099.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:39.709Z,1509678099.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:40.080Z,1509678100.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:40.116Z,1509678100.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:40.490Z,1509678100.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:40.573Z,1509678100.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:40.605Z,1509678100.605 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:01:40.605Z,1509678100.605 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T03:01:40.605Z,1509678100.605 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:01:40.680Z,1509678100.680 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:01:40.897Z,1509678100.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:40.923Z,1509678100.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:01:40.924Z,1509678100.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:41.009Z,1509678101.009 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:01:41.108Z,1509678101.108 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:01:41.302Z,1509678101.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:41.335Z,1509678101.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:01:41.336Z,1509678101.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:41.679Z,1509678101.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:41.694Z,1509678101.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-03T03:01:41.695Z,1509678101.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:42.083Z,1509678102.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:42.099Z,1509678102.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-03T03:01:42.100Z,1509678102.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:42.479Z,1509678102.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:42.495Z,1509678102.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-03T03:01:42.496Z,1509678102.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:42.608Z,1509678102.608 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:01:42.608Z,1509678102.608 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T03:01:42.724Z,1509678102.724 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:01:42.725Z,1509678102.725 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:01:42.725Z,1509678102.725 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:01:42.725Z,1509678102.725 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:01:42.877Z,1509678102.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:42.892Z,1509678102.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T03:01:42.894Z,1509678102.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:43.280Z,1509678103.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:01:43.295Z,1509678103.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-11-03T03:01:43.297Z,1509678103.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:43.725Z,1509678103.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:01:43.726Z,1509678103.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:43.813Z,1509678103.813 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T03:01:44.120Z,1509678104.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:01:44.125Z,1509678104.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:44.508Z,1509678104.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T03:01:44.525Z,1509678104.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:44.899Z,1509678104.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T03:01:44.900Z,1509678104.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:45.297Z,1509678105.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T03:01:45.298Z,1509678105.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:45.706Z,1509678105.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T03:01:45.707Z,1509678105.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:46.099Z,1509678106.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T03:01:46.100Z,1509678106.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:46.527Z,1509678106.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:01:46.528Z,1509678106.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:46.879Z,1509678106.879 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:01:46.952Z,1509678106.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:01:46.954Z,1509678106.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:47.028Z,1509678107.028 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:01:47.029Z,1509678107.029 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:01:47.030Z,1509678107.030 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:01:47.031Z,1509678107.031 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:01:47.350Z,1509678107.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:01:47.351Z,1509678107.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:47.707Z,1509678107.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:48.107Z,1509678108.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:48.504Z,1509678108.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:48.906Z,1509678108.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:49.302Z,1509678109.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:49.719Z,1509678109.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:50.114Z,1509678110.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:50.579Z,1509678110.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:50.911Z,1509678110.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:51.334Z,1509678111.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:51.723Z,1509678111.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:52.131Z,1509678112.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:52.535Z,1509678112.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:52.919Z,1509678112.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:53.323Z,1509678113.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:53.698Z,1509678113.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:54.091Z,1509678114.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:54.494Z,1509678114.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:54.896Z,1509678114.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:55.318Z,1509678115.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:55.717Z,1509678115.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:56.124Z,1509678116.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:56.517Z,1509678116.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:56.899Z,1509678116.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:57.293Z,1509678117.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:57.695Z,1509678117.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:58.095Z,1509678118.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:58.520Z,1509678118.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:58.923Z,1509678118.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:59.319Z,1509678119.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:01:59.695Z,1509678119.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:00.121Z,1509678120.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:00.495Z,1509678120.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:00.891Z,1509678120.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:01.332Z,1509678121.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:01.718Z,1509678121.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:02.120Z,1509678122.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:02.517Z,1509678122.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:02.919Z,1509678122.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:03.290Z,1509678123.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:03.718Z,1509678123.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:04.095Z,1509678124.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:04.547Z,1509678124.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:04.923Z,1509678124.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:05.320Z,1509678125.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:05.696Z,1509678125.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:06.099Z,1509678126.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:06.503Z,1509678126.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:06.899Z,1509678126.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:07.299Z,1509678127.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:07.713Z,1509678127.713 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:02:07.713Z,1509678127.713 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:02:07.713Z,1509678127.713 [BPC1](ERROR): Communications Fault
2017-11-03T03:02:07.722Z,1509678127.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:07.813Z,1509678127.813 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:02:08.116Z,1509678128.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:08.520Z,1509678128.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:08.898Z,1509678128.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:09.013Z,1509678129.013 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:02:09.013Z,1509678129.013 [BPC1] No Fault, FailCount= 1
2017-11-03T03:02:09.351Z,1509678129.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:09.695Z,1509678129.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:10.094Z,1509678130.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:10.524Z,1509678130.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:10.924Z,1509678130.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:11.320Z,1509678131.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:11.695Z,1509678131.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:12.099Z,1509678132.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:12.494Z,1509678132.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:12.895Z,1509678132.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:13.339Z,1509678133.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:13.725Z,1509678133.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:14.124Z,1509678134.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:14.524Z,1509678134.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:14.895Z,1509678134.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:15.336Z,1509678135.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:15.697Z,1509678135.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:16.099Z,1509678136.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:16.523Z,1509678136.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:16.925Z,1509678136.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:17.325Z,1509678137.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:17.698Z,1509678137.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:18.096Z,1509678138.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:18.495Z,1509678138.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:18.895Z,1509678138.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:19.296Z,1509678139.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:19.720Z,1509678139.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:22.927Z,1509678142.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:23.132Z,1509678143.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:23.492Z,1509678143.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:23.895Z,1509678143.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:24.316Z,1509678144.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:24.700Z,1509678144.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:25.159Z,1509678145.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:25.501Z,1509678145.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:25.911Z,1509678145.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:26.311Z,1509678146.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:26.696Z,1509678146.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:27.142Z,1509678147.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:27.505Z,1509678147.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:27.903Z,1509678147.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:28.310Z,1509678148.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:28.679Z,1509678148.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:29.079Z,1509678149.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:29.494Z,1509678149.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:29.880Z,1509678149.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:30.304Z,1509678150.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:30.703Z,1509678150.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:31.104Z,1509678151.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:31.549Z,1509678151.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:31.882Z,1509678151.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:32.284Z,1509678152.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:32.690Z,1509678152.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:33.083Z,1509678153.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:33.575Z,1509678153.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:33.899Z,1509678153.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:34.303Z,1509678154.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:34.691Z,1509678154.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:35.092Z,1509678155.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:35.495Z,1509678155.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:35.889Z,1509678155.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:36.293Z,1509678156.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:36.699Z,1509678156.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:37.151Z,1509678157.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:37.507Z,1509678157.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:37.888Z,1509678157.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:38.346Z,1509678158.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:38.688Z,1509678158.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:39.135Z,1509678159.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:39.497Z,1509678159.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:39.938Z,1509678159.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:40.331Z,1509678160.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:40.691Z,1509678160.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:41.148Z,1509678161.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:41.488Z,1509678161.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:41.905Z,1509678161.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:42.295Z,1509678162.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:42.699Z,1509678162.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:43.100Z,1509678163.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:43.501Z,1509678163.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:43.889Z,1509678163.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:44.285Z,1509678164.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:44.690Z,1509678164.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:45.095Z,1509678165.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:45.562Z,1509678165.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:45.904Z,1509678165.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:46.305Z,1509678166.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:46.693Z,1509678166.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:47.144Z,1509678167.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:47.494Z,1509678167.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:47.903Z,1509678167.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:48.279Z,1509678168.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:48.705Z,1509678168.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:49.112Z,1509678169.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:49.503Z,1509678169.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:49.903Z,1509678169.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:50.280Z,1509678170.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:50.727Z,1509678170.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:51.091Z,1509678171.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:51.496Z,1509678171.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:51.927Z,1509678171.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:52.298Z,1509678172.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:52.686Z,1509678172.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:53.135Z,1509678173.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:53.487Z,1509678173.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:53.923Z,1509678173.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:54.319Z,1509678174.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:54.698Z,1509678174.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:55.148Z,1509678175.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:55.492Z,1509678175.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:55.887Z,1509678175.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:56.287Z,1509678176.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:56.695Z,1509678176.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:57.086Z,1509678177.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:57.492Z,1509678177.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:57.900Z,1509678177.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:58.293Z,1509678178.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:58.687Z,1509678178.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:59.087Z,1509678179.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:59.495Z,1509678179.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:02:59.891Z,1509678179.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:00.291Z,1509678180.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:00.695Z,1509678180.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:01.096Z,1509678181.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:01.499Z,1509678181.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:01.892Z,1509678181.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:02.292Z,1509678182.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:02.690Z,1509678182.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:03.092Z,1509678183.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:03.501Z,1509678183.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:03.899Z,1509678183.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:04.301Z,1509678184.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:04.692Z,1509678184.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:05.099Z,1509678185.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:05.490Z,1509678185.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:05.892Z,1509678185.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:06.291Z,1509678186.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:06.749Z,1509678186.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:07.123Z,1509678187.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:07.500Z,1509678187.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:07.893Z,1509678187.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:08.294Z,1509678188.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:08.691Z,1509678188.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:09.147Z,1509678189.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:09.498Z,1509678189.498 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:03:09.498Z,1509678189.498 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:03:09.498Z,1509678189.498 [BPC1](ERROR): Communications Fault
2017-11-03T03:03:09.506Z,1509678189.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:09.581Z,1509678189.581 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:03:09.907Z,1509678189.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:10.300Z,1509678190.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:10.683Z,1509678190.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:10.769Z,1509678190.769 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:03:10.769Z,1509678190.769 [BPC1] No Fault, FailCount= 1
2017-11-03T03:03:11.147Z,1509678191.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:11.501Z,1509678191.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:11.875Z,1509678191.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:12.297Z,1509678192.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:12.742Z,1509678192.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:13.099Z,1509678193.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:13.551Z,1509678193.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:13.878Z,1509678193.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:14.282Z,1509678194.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:14.679Z,1509678194.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:15.077Z,1509678195.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:15.573Z,1509678195.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:15.905Z,1509678195.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:16.317Z,1509678196.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:16.678Z,1509678196.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:17.102Z,1509678197.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:17.479Z,1509678197.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:17.880Z,1509678197.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:18.302Z,1509678198.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:18.701Z,1509678198.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:19.119Z,1509678199.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:19.504Z,1509678199.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:19.902Z,1509678199.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:23.230Z,1509678203.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:23.405Z,1509678203.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:23.813Z,1509678203.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:24.221Z,1509678204.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:24.649Z,1509678204.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:25.007Z,1509678205.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:25.427Z,1509678205.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:25.835Z,1509678205.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:26.205Z,1509678206.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:26.613Z,1509678206.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:27.014Z,1509678207.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:27.412Z,1509678207.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:27.805Z,1509678207.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:28.204Z,1509678208.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:28.603Z,1509678208.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:28.999Z,1509678208.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:29.419Z,1509678209.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:29.824Z,1509678209.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:30.211Z,1509678210.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:30.612Z,1509678210.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:31.051Z,1509678211.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:31.387Z,1509678211.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:31.809Z,1509678211.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:32.211Z,1509678212.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:32.613Z,1509678212.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:33.065Z,1509678213.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:33.397Z,1509678213.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:33.412Z,1509678213.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:33.776Z,1509678213.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:33.810Z,1509678213.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:34.176Z,1509678214.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:34.192Z,1509678214.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:34.580Z,1509678214.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:34.595Z,1509678214.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:35.039Z,1509678215.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:35.069Z,1509678215.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:35.394Z,1509678215.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:35.416Z,1509678215.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:35.790Z,1509678215.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:35.820Z,1509678215.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:36.189Z,1509678216.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:36.239Z,1509678216.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:36.583Z,1509678216.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:36.622Z,1509678216.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:36.976Z,1509678216.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:36.999Z,1509678216.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:37.386Z,1509678217.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:37.401Z,1509678217.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:37.787Z,1509678217.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:37.802Z,1509678217.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:38.182Z,1509678218.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:38.238Z,1509678218.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:38.589Z,1509678218.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:38.605Z,1509678218.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:38.990Z,1509678218.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:39.039Z,1509678219.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:39.388Z,1509678219.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:39.403Z,1509678219.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:39.782Z,1509678219.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:39.842Z,1509678219.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:40.187Z,1509678220.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:40.241Z,1509678220.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:40.587Z,1509678220.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:40.607Z,1509678220.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:40.985Z,1509678220.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:41.001Z,1509678221.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:41.390Z,1509678221.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:41.406Z,1509678221.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:41.790Z,1509678221.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:41.811Z,1509678221.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:42.194Z,1509678222.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:42.209Z,1509678222.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:42.585Z,1509678222.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:42.600Z,1509678222.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:42.600Z,1509678222.600 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2017-11-03T03:03:42.600Z,1509678222.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:03:42.602Z,1509678222.602 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:42.602Z,1509678222.602 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2017-11-03T03:03:42.602Z,1509678222.602 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:03:42.604Z,1509678222.604 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:42.604Z,1509678222.604 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2017-11-03T03:03:42.604Z,1509678222.604 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:03:42.685Z,1509678222.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:03:42.685Z,1509678222.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:03:42.685Z,1509678222.685 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:03:42.983Z,1509678222.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:43.089Z,1509678223.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:03:43.089Z,1509678223.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2017-11-03T03:03:43.089Z,1509678223.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:03:43.089Z,1509678223.089 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2017-11-03T03:03:43.090Z,1509678223.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:03:43.090Z,1509678223.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2017-11-03T03:03:43.160Z,1509678223.160 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:03:43.160Z,1509678223.160 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T03:03:43.160Z,1509678223.160 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:03:43.387Z,1509678223.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:43.401Z,1509678223.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:03:43.402Z,1509678223.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:03:43.402Z,1509678223.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:03:43.403Z,1509678223.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:03:43.403Z,1509678223.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:03:43.403Z,1509678223.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:03:43.404Z,1509678223.404 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:03:43.404Z,1509678223.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:03:43.405Z,1509678223.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:03:43.485Z,1509678223.485 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:03:43.565Z,1509678223.565 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:03:43.669Z,1509678223.669 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:03:43.791Z,1509678223.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:43.811Z,1509678223.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:03:43.812Z,1509678223.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:44.172Z,1509678224.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:44.201Z,1509678224.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:03:44.202Z,1509678224.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:44.594Z,1509678224.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:44.609Z,1509678224.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:03:44.610Z,1509678224.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:44.997Z,1509678224.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:45.012Z,1509678225.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:03:45.013Z,1509678225.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:45.109Z,1509678225.109 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:03:45.109Z,1509678225.109 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T03:03:45.284Z,1509678225.284 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:03:45.285Z,1509678225.285 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:03:45.285Z,1509678225.285 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:03:45.285Z,1509678225.285 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:03:45.401Z,1509678225.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:45.422Z,1509678225.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:03:45.423Z,1509678225.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:45.773Z,1509678225.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:45.804Z,1509678225.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:03:45.809Z,1509678225.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:46.179Z,1509678226.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:46.198Z,1509678226.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:03:46.199Z,1509678226.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:46.622Z,1509678226.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:46.638Z,1509678226.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:03:46.639Z,1509678226.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:46.975Z,1509678226.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:46.994Z,1509678226.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:03:46.995Z,1509678226.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:47.398Z,1509678227.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:47.426Z,1509678227.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:03:47.427Z,1509678227.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:47.797Z,1509678227.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:47.826Z,1509678227.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:03:47.827Z,1509678227.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:48.197Z,1509678228.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:48.221Z,1509678228.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:03:48.222Z,1509678228.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:48.583Z,1509678228.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:48.599Z,1509678228.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:03:48.600Z,1509678228.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:48.983Z,1509678228.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:48.997Z,1509678228.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:03:48.998Z,1509678228.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:49.393Z,1509678229.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:49.431Z,1509678229.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:03:49.432Z,1509678229.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:49.527Z,1509678229.527 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:03:49.598Z,1509678229.598 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:03:49.600Z,1509678229.600 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:03:49.601Z,1509678229.601 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:03:49.602Z,1509678229.602 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:03:49.784Z,1509678229.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:49.801Z,1509678229.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:03:49.802Z,1509678229.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:50.179Z,1509678230.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:50.210Z,1509678230.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:50.593Z,1509678230.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:50.615Z,1509678230.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:50.993Z,1509678230.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:03:51.058Z,1509678231.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:51.407Z,1509678231.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:51.805Z,1509678231.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:52.204Z,1509678232.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:52.620Z,1509678232.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:53.090Z,1509678233.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:53.443Z,1509678233.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:53.812Z,1509678233.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:54.247Z,1509678234.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:54.600Z,1509678234.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:55.102Z,1509678235.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:55.403Z,1509678235.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:55.801Z,1509678235.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:56.202Z,1509678236.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:56.613Z,1509678236.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:57.095Z,1509678237.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:57.418Z,1509678237.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:57.802Z,1509678237.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:58.214Z,1509678238.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:58.603Z,1509678238.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:59.052Z,1509678239.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:59.412Z,1509678239.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:03:59.818Z,1509678239.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:00.212Z,1509678240.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:00.600Z,1509678240.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:01.001Z,1509678241.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:01.412Z,1509678241.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:01.809Z,1509678241.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:02.190Z,1509678242.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:02.622Z,1509678242.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:03.019Z,1509678243.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:03.422Z,1509678243.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:03.811Z,1509678243.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:04.203Z,1509678244.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:04.609Z,1509678244.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:04.992Z,1509678244.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:05.419Z,1509678245.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:05.806Z,1509678245.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:06.243Z,1509678246.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:06.614Z,1509678246.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:07.035Z,1509678247.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:07.418Z,1509678247.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:07.847Z,1509678247.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:08.215Z,1509678248.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:08.647Z,1509678248.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:09.099Z,1509678249.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:09.406Z,1509678249.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:09.799Z,1509678249.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:10.199Z,1509678250.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:10.601Z,1509678250.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:11.063Z,1509678251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:11.413Z,1509678251.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:11.819Z,1509678251.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:12.214Z,1509678252.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:12.604Z,1509678252.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:13.067Z,1509678253.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:13.400Z,1509678253.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:13.796Z,1509678253.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:14.195Z,1509678254.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:14.624Z,1509678254.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:15.086Z,1509678255.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:15.425Z,1509678255.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:15.795Z,1509678255.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:16.195Z,1509678256.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:16.596Z,1509678256.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:16.997Z,1509678256.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:17.415Z,1509678257.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:17.840Z,1509678257.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:18.216Z,1509678258.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:18.601Z,1509678258.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:19.015Z,1509678259.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:19.404Z,1509678259.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:19.843Z,1509678259.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:20.211Z,1509678260.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:23.516Z,1509678263.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:23.669Z,1509678263.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:24.102Z,1509678264.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:24.457Z,1509678264.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:24.892Z,1509678264.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:25.283Z,1509678265.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:25.665Z,1509678265.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:26.067Z,1509678266.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:26.470Z,1509678266.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:26.859Z,1509678266.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:27.264Z,1509678267.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:27.660Z,1509678267.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:28.059Z,1509678268.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:28.507Z,1509678268.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:28.868Z,1509678268.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:29.271Z,1509678269.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:29.643Z,1509678269.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:30.086Z,1509678270.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:30.467Z,1509678270.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:30.851Z,1509678270.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:31.310Z,1509678271.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:31.669Z,1509678271.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:32.079Z,1509678272.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:32.474Z,1509678272.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:32.846Z,1509678272.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:33.269Z,1509678273.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:33.673Z,1509678273.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:34.049Z,1509678274.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:34.468Z,1509678274.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:34.869Z,1509678274.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:35.279Z,1509678275.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:35.669Z,1509678275.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:36.086Z,1509678276.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:36.455Z,1509678276.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:36.891Z,1509678276.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:37.247Z,1509678277.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:37.691Z,1509678277.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:38.091Z,1509678278.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:38.482Z,1509678278.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:38.849Z,1509678278.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:39.251Z,1509678279.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:39.675Z,1509678279.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:40.052Z,1509678280.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:40.471Z,1509678280.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:40.872Z,1509678280.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:41.273Z,1509678281.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:41.652Z,1509678281.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:42.050Z,1509678282.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:42.447Z,1509678282.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:42.855Z,1509678282.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:43.274Z,1509678283.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:43.670Z,1509678283.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:44.078Z,1509678284.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:44.480Z,1509678284.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:44.852Z,1509678284.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:45.330Z,1509678285.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:45.653Z,1509678285.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:46.055Z,1509678286.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:46.457Z,1509678286.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:46.879Z,1509678286.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:47.256Z,1509678287.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:47.659Z,1509678287.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:48.042Z,1509678288.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:04:48.057Z,1509678288.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:48.437Z,1509678288.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:04:48.498Z,1509678288.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:48.838Z,1509678288.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:04:48.854Z,1509678288.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:49.254Z,1509678289.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:49.664Z,1509678289.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:50.064Z,1509678290.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:50.502Z,1509678290.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:50.855Z,1509678290.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:51.278Z,1509678291.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:51.654Z,1509678291.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:52.102Z,1509678292.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:52.478Z,1509678292.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:52.896Z,1509678292.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:53.287Z,1509678293.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:53.647Z,1509678293.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:54.050Z,1509678294.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:54.450Z,1509678294.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:54.852Z,1509678294.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:55.261Z,1509678295.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:55.671Z,1509678295.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:56.064Z,1509678296.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:56.470Z,1509678296.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:56.838Z,1509678296.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:57.265Z,1509678297.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:57.661Z,1509678297.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:58.059Z,1509678298.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:58.471Z,1509678298.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:58.864Z,1509678298.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:59.309Z,1509678299.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:04:59.667Z,1509678299.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:00.043Z,1509678300.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:00.446Z,1509678300.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:00.846Z,1509678300.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:01.249Z,1509678301.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:01.672Z,1509678301.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:02.070Z,1509678302.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:02.472Z,1509678302.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:02.871Z,1509678302.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:03.294Z,1509678303.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:03.674Z,1509678303.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:04.051Z,1509678304.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:04.475Z,1509678304.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:04.899Z,1509678304.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:05.255Z,1509678305.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:05.651Z,1509678305.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:06.083Z,1509678306.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:06.446Z,1509678306.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:06.895Z,1509678306.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:07.255Z,1509678307.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:07.691Z,1509678307.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:08.074Z,1509678308.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:08.475Z,1509678308.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:08.851Z,1509678308.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:09.251Z,1509678309.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:09.655Z,1509678309.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:10.049Z,1509678310.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:10.475Z,1509678310.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:10.874Z,1509678310.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:11.301Z,1509678311.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:11.648Z,1509678311.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:12.051Z,1509678312.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:12.448Z,1509678312.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:12.855Z,1509678312.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:13.322Z,1509678313.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:13.656Z,1509678313.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:14.078Z,1509678314.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:14.477Z,1509678314.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:14.854Z,1509678314.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:15.255Z,1509678315.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:15.677Z,1509678315.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:16.053Z,1509678316.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:16.477Z,1509678316.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:16.875Z,1509678316.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:17.278Z,1509678317.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:17.676Z,1509678317.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:18.090Z,1509678318.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:18.457Z,1509678318.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:18.853Z,1509678318.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:19.251Z,1509678319.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:19.702Z,1509678319.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:19.709Z,1509678319.709 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T03:00:19.4Z
2017-11-03T03:05:19.710Z,1509678319.710 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T03:05:19.710Z,1509678319.710 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T03:05:20.060Z,1509678320.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:20.587Z,1509678320.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:23.707Z,1509678323.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:23.833Z,1509678323.833 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171103T001125/Courier0068.lzma
2017-11-03T03:05:23.915Z,1509678323.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:24.328Z,1509678324.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:24.631Z,1509678324.631 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0068.lzma.bak
2017-11-03T03:05:24.631Z,1509678324.631 [DataOverHttps](INFO): SBD MOMSN=5182551
2017-11-03T03:05:24.697Z,1509678324.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:25.437Z,1509678325.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:25.589Z,1509678325.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:28.835Z,1509678328.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:28.995Z,1509678328.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:29.396Z,1509678329.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:29.806Z,1509678329.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:30.197Z,1509678330.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:30.593Z,1509678330.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:33.847Z,1509678333.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:33.862Z,1509678333.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:33.984Z,1509678333.984 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20171103T001125/Express0069.lzma
2017-11-03T03:05:34.005Z,1509678334.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:34.045Z,1509678334.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:34.415Z,1509678334.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:34.442Z,1509678334.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:34.775Z,1509678334.775 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0069.lzma.bak
2017-11-03T03:05:34.775Z,1509678334.775 [DataOverHttps](INFO): SBD MOMSN=5182554
2017-11-03T03:05:34.812Z,1509678334.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:34.853Z,1509678334.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:35.424Z,1509678335.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:35.467Z,1509678335.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:35.486Z,1509678335.486 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T03:05:35.486Z,1509678335.486 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T03:05:35.486Z,1509678335.486 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T03:05:35.615Z,1509678335.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:35.650Z,1509678335.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:38.859Z,1509678338.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:38.920Z,1509678338.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:39.127Z,1509678339.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:39.156Z,1509678339.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:39.465Z,1509678339.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:39.481Z,1509678339.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:39.869Z,1509678339.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:39.919Z,1509678339.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:40.260Z,1509678340.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:40.281Z,1509678340.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:40.647Z,1509678340.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:40.714Z,1509678340.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:41.045Z,1509678341.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:41.109Z,1509678341.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:41.443Z,1509678341.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:41.475Z,1509678341.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:41.846Z,1509678341.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:41.872Z,1509678341.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:42.247Z,1509678342.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:42.273Z,1509678342.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:42.664Z,1509678342.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:42.680Z,1509678342.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:43.066Z,1509678343.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:43.081Z,1509678343.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:43.466Z,1509678343.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:43.482Z,1509678343.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:43.842Z,1509678343.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:43.874Z,1509678343.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:44.244Z,1509678344.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:44.275Z,1509678344.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:44.648Z,1509678344.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:44.674Z,1509678344.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:45.047Z,1509678345.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:45.072Z,1509678345.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:45.465Z,1509678345.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:45.480Z,1509678345.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:45.593Z,1509678345.593 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:05:45.593Z,1509678345.593 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T03:05:45.593Z,1509678345.593 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:05:45.878Z,1509678345.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:45.892Z,1509678345.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:05:45.893Z,1509678345.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:45.984Z,1509678345.984 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:05:45.996Z,1509678345.996 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:05:46.098Z,1509678346.098 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:05:46.258Z,1509678346.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:46.339Z,1509678346.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T03:05:46.341Z,1509678346.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:46.645Z,1509678346.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:46.660Z,1509678346.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:05:46.677Z,1509678346.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:47.045Z,1509678347.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:47.081Z,1509678347.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:05:47.082Z,1509678347.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:47.451Z,1509678347.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:47.470Z,1509678347.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:05:47.471Z,1509678347.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:47.580Z,1509678347.580 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:05:47.580Z,1509678347.580 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T03:05:47.712Z,1509678347.712 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:05:47.713Z,1509678347.713 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:05:47.713Z,1509678347.713 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:05:47.713Z,1509678347.713 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:05:47.850Z,1509678347.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:47.866Z,1509678347.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:05:47.866Z,1509678347.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:48.249Z,1509678348.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:48.264Z,1509678348.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:05:48.265Z,1509678348.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:48.662Z,1509678348.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:48.692Z,1509678348.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:05:48.694Z,1509678348.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:49.062Z,1509678349.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:05:49.100Z,1509678349.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:05:49.101Z,1509678349.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:49.494Z,1509678349.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:05:49.495Z,1509678349.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:49.868Z,1509678349.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:05:49.869Z,1509678349.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:50.267Z,1509678350.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:05:50.269Z,1509678350.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:50.672Z,1509678350.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:05:50.673Z,1509678350.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:51.078Z,1509678351.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:05:51.079Z,1509678351.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:51.481Z,1509678351.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:05:51.482Z,1509678351.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:51.882Z,1509678351.882 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:05:51.983Z,1509678351.983 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:05:51.985Z,1509678351.985 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:05:51.985Z,1509678351.985 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:05:51.986Z,1509678351.986 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:05:52.002Z,1509678352.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T03:05:52.003Z,1509678352.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:52.286Z,1509678352.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:05:52.287Z,1509678352.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:52.692Z,1509678352.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:53.104Z,1509678353.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:53.484Z,1509678353.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:53.899Z,1509678353.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:54.259Z,1509678354.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:54.711Z,1509678354.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:55.111Z,1509678355.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:55.491Z,1509678355.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:55.890Z,1509678355.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:56.275Z,1509678356.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:56.681Z,1509678356.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:57.079Z,1509678357.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:57.526Z,1509678357.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:57.891Z,1509678357.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:58.291Z,1509678358.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:58.731Z,1509678358.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:59.144Z,1509678359.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:59.491Z,1509678359.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:05:59.883Z,1509678359.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:00.294Z,1509678360.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:00.745Z,1509678360.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:01.095Z,1509678361.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:01.499Z,1509678361.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:01.892Z,1509678361.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:02.293Z,1509678362.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:02.694Z,1509678362.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:03.090Z,1509678363.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:03.498Z,1509678363.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:03.915Z,1509678363.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:04.294Z,1509678364.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:04.659Z,1509678364.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:05.076Z,1509678365.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:05.458Z,1509678365.458 [BPC1](ERROR): Failed to parse message.
2017-11-03T03:06:05.458Z,1509678365.458 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T03:06:05.458Z,1509678365.458 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:06:05.458Z,1509678365.458 [BPC1](ERROR): Data Fault
2017-11-03T03:06:05.503Z,1509678365.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:05.605Z,1509678365.605 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:06:05.878Z,1509678365.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:06.318Z,1509678366.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:06.715Z,1509678366.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:06.821Z,1509678366.821 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:06:06.821Z,1509678366.821 [BPC1] No Fault, FailCount= 1
2017-11-03T03:06:07.217Z,1509678367.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:07.521Z,1509678367.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:07.919Z,1509678367.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:08.329Z,1509678368.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:08.691Z,1509678368.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:09.079Z,1509678369.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:09.483Z,1509678369.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:09.913Z,1509678369.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:10.287Z,1509678370.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:10.690Z,1509678370.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:11.133Z,1509678371.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:11.458Z,1509678371.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:11.863Z,1509678371.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:12.337Z,1509678372.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:12.689Z,1509678372.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:13.090Z,1509678373.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:13.491Z,1509678373.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:13.863Z,1509678373.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:14.263Z,1509678374.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:14.660Z,1509678374.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:14.695Z,1509678374.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:15.048Z,1509678375.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:15.063Z,1509678375.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:15.461Z,1509678375.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:15.492Z,1509678375.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:15.853Z,1509678375.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:15.869Z,1509678375.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:16.261Z,1509678376.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:16.292Z,1509678376.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:16.659Z,1509678376.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:16.692Z,1509678376.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:17.049Z,1509678377.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:17.064Z,1509678377.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:17.449Z,1509678377.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:17.464Z,1509678377.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:17.850Z,1509678377.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:06:17.865Z,1509678377.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:18.271Z,1509678378.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:18.719Z,1509678378.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:19.090Z,1509678379.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:19.490Z,1509678379.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:19.910Z,1509678379.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:20.263Z,1509678380.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:20.703Z,1509678380.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:21.063Z,1509678381.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:21.515Z,1509678381.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:22.066Z,1509678382.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:22.295Z,1509678382.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:22.663Z,1509678382.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:23.062Z,1509678383.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:23.463Z,1509678383.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:23.863Z,1509678383.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:24.270Z,1509678384.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:24.693Z,1509678384.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:25.094Z,1509678385.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:25.492Z,1509678385.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:25.863Z,1509678385.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:26.321Z,1509678386.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:26.665Z,1509678386.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:27.065Z,1509678387.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:27.483Z,1509678387.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:27.877Z,1509678387.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:28.271Z,1509678388.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:28.668Z,1509678388.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:29.062Z,1509678389.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:29.467Z,1509678389.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:29.863Z,1509678389.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:30.262Z,1509678390.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:30.673Z,1509678390.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:31.079Z,1509678391.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:31.512Z,1509678391.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:31.867Z,1509678391.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:32.260Z,1509678392.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:32.683Z,1509678392.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:33.067Z,1509678393.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:33.469Z,1509678393.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:33.895Z,1509678393.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:34.291Z,1509678394.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:34.691Z,1509678394.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:35.113Z,1509678395.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:35.498Z,1509678395.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:35.894Z,1509678395.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:39.992Z,1509678399.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:40.165Z,1509678400.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:40.552Z,1509678400.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:40.954Z,1509678400.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:41.340Z,1509678401.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:41.743Z,1509678401.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:42.143Z,1509678402.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:42.631Z,1509678402.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:42.959Z,1509678402.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:43.400Z,1509678403.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:43.404Z,1509678403.404 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:43.404Z,1509678403.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2017-11-03T03:06:43.404Z,1509678403.404 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:06:43.406Z,1509678403.406 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:43.406Z,1509678403.406 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2017-11-03T03:06:43.406Z,1509678403.406 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:06:43.532Z,1509678403.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:06:43.533Z,1509678403.533 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:06:43.744Z,1509678403.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:43.744Z,1509678403.744 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2017-11-03T03:06:43.744Z,1509678403.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:06:43.832Z,1509678403.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:06:43.833Z,1509678403.833 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:06:43.833Z,1509678403.833 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2017-11-03T03:06:43.833Z,1509678403.833 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:06:43.833Z,1509678403.833 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2017-11-03T03:06:44.142Z,1509678404.142 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:06:44.142Z,1509678404.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:06:44.143Z,1509678404.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:06:44.143Z,1509678404.143 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:06:44.144Z,1509678404.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:06:44.144Z,1509678404.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:06:44.244Z,1509678404.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:06:44.244Z,1509678404.244 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2017-11-03T03:06:44.598Z,1509678404.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:06:44.598Z,1509678404.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:06:44.599Z,1509678404.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:06:44.945Z,1509678404.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:45.354Z,1509678405.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:45.758Z,1509678405.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:46.151Z,1509678406.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:46.590Z,1509678406.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:46.943Z,1509678406.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:47.354Z,1509678407.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:47.795Z,1509678407.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:48.165Z,1509678408.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:48.544Z,1509678408.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:48.974Z,1509678408.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:49.353Z,1509678409.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:49.787Z,1509678409.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:50.199Z,1509678410.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:50.543Z,1509678410.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:50.944Z,1509678410.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:51.359Z,1509678411.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:51.762Z,1509678411.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:52.158Z,1509678412.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:52.544Z,1509678412.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:52.944Z,1509678412.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:53.354Z,1509678413.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:53.753Z,1509678413.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:54.163Z,1509678414.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:54.553Z,1509678414.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:54.949Z,1509678414.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:55.361Z,1509678415.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:55.783Z,1509678415.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:56.159Z,1509678416.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:56.618Z,1509678416.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:56.931Z,1509678416.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:57.358Z,1509678417.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:57.763Z,1509678417.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:58.163Z,1509678418.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:58.607Z,1509678418.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:58.946Z,1509678418.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:59.354Z,1509678419.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:06:59.756Z,1509678419.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:00.159Z,1509678420.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:00.545Z,1509678420.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:00.945Z,1509678420.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:01.354Z,1509678421.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:01.763Z,1509678421.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:02.152Z,1509678422.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:02.571Z,1509678422.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:02.928Z,1509678422.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:03.354Z,1509678423.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:03.779Z,1509678423.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:04.155Z,1509678424.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:04.563Z,1509678424.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:04.963Z,1509678424.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:05.366Z,1509678425.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:05.753Z,1509678425.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:06.158Z,1509678426.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:06.555Z,1509678426.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:06.947Z,1509678426.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:07.352Z,1509678427.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:07.750Z,1509678427.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:08.159Z,1509678428.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:08.553Z,1509678428.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:08.927Z,1509678428.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:09.355Z,1509678429.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:09.763Z,1509678429.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:10.159Z,1509678430.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:10.615Z,1509678430.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:10.932Z,1509678430.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:11.359Z,1509678431.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:11.759Z,1509678431.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:12.154Z,1509678432.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:12.611Z,1509678432.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:12.932Z,1509678432.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:13.363Z,1509678433.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:13.763Z,1509678433.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:14.145Z,1509678434.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:14.549Z,1509678434.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:14.932Z,1509678434.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:15.354Z,1509678435.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:15.762Z,1509678435.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:16.158Z,1509678436.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:16.533Z,1509678436.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:16.971Z,1509678436.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:17.391Z,1509678437.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:17.763Z,1509678437.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:18.179Z,1509678438.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:18.537Z,1509678438.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:18.967Z,1509678438.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:19.379Z,1509678439.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:19.761Z,1509678439.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:20.166Z,1509678440.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:20.537Z,1509678440.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:20.937Z,1509678440.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:21.362Z,1509678441.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:21.763Z,1509678441.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:22.163Z,1509678442.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:22.551Z,1509678442.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:22.941Z,1509678442.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:23.349Z,1509678443.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:23.759Z,1509678443.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:24.159Z,1509678444.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:24.605Z,1509678444.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:24.939Z,1509678444.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:25.355Z,1509678445.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:25.749Z,1509678445.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:26.159Z,1509678446.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:26.609Z,1509678446.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:26.947Z,1509678446.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:27.353Z,1509678447.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:27.738Z,1509678447.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:27.758Z,1509678447.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:28.138Z,1509678448.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:28.159Z,1509678448.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:28.527Z,1509678448.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:28.547Z,1509678448.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:28.927Z,1509678448.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:28.947Z,1509678448.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:29.338Z,1509678449.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:29.359Z,1509678449.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:29.737Z,1509678449.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:29.752Z,1509678449.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:30.138Z,1509678450.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:30.153Z,1509678450.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:30.526Z,1509678450.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:30.541Z,1509678450.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:30.926Z,1509678450.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:30.942Z,1509678450.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:31.338Z,1509678451.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:31.400Z,1509678451.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:31.735Z,1509678451.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:31.802Z,1509678451.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:32.142Z,1509678452.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:32.157Z,1509678452.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:32.526Z,1509678452.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:32.582Z,1509678452.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:32.913Z,1509678452.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:32.947Z,1509678452.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:33.339Z,1509678453.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:33.391Z,1509678453.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:33.734Z,1509678453.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:33.787Z,1509678453.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:34.139Z,1509678454.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:34.155Z,1509678454.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:34.526Z,1509678454.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:34.542Z,1509678454.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:34.925Z,1509678454.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:34.951Z,1509678454.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:35.339Z,1509678455.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:35.359Z,1509678455.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:35.738Z,1509678455.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:35.753Z,1509678455.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:36.139Z,1509678456.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:36.163Z,1509678456.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:39.298Z,1509678459.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:39.313Z,1509678459.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:39.445Z,1509678459.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:39.489Z,1509678459.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:39.822Z,1509678459.822 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T03:07:39.822Z,1509678459.822 [NAL9602] Data Fault, FailCount= 1
2017-11-03T03:07:39.822Z,1509678459.822 [NAL9602](ERROR): Data Fault
2017-11-03T03:07:39.851Z,1509678459.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:39.875Z,1509678459.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:39.965Z,1509678459.965 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T03:07:40.219Z,1509678460.219 [NAL9602](INFO): Powering down
2017-11-03T03:07:40.251Z,1509678460.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:40.266Z,1509678460.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:40.641Z,1509678460.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:40.662Z,1509678460.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:41.045Z,1509678461.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:41.060Z,1509678461.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:41.148Z,1509678461.148 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T03:07:41.148Z,1509678461.148 [NAL9602] No Fault, FailCount= 1
2017-11-03T03:07:41.448Z,1509678461.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:41.463Z,1509678461.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:41.844Z,1509678461.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:41.860Z,1509678461.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:42.242Z,1509678462.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:42.258Z,1509678462.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:42.645Z,1509678462.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:42.661Z,1509678462.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:43.041Z,1509678463.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:43.057Z,1509678463.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:43.443Z,1509678463.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:43.457Z,1509678463.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:43.847Z,1509678463.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:43.862Z,1509678463.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:44.251Z,1509678464.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:44.267Z,1509678464.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:44.647Z,1509678464.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:44.666Z,1509678464.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:45.046Z,1509678465.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:45.067Z,1509678465.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:45.443Z,1509678465.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:45.459Z,1509678465.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:45.846Z,1509678465.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:45.879Z,1509678465.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:46.234Z,1509678466.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:46.287Z,1509678466.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:46.636Z,1509678466.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:46.662Z,1509678466.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:47.032Z,1509678467.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:47.062Z,1509678467.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:47.438Z,1509678467.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:47.507Z,1509678467.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:47.838Z,1509678467.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:47.882Z,1509678467.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:48.081Z,1509678468.081 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:07:48.081Z,1509678468.081 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T03:07:48.081Z,1509678468.081 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:07:48.235Z,1509678468.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:48.290Z,1509678468.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:07:48.291Z,1509678468.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:48.398Z,1509678468.398 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:07:48.398Z,1509678468.398 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T03:07:48.484Z,1509678468.484 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:07:48.571Z,1509678468.571 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:07:48.635Z,1509678468.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:48.707Z,1509678468.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:07:48.708Z,1509678468.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:49.036Z,1509678469.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:49.061Z,1509678469.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:07:49.062Z,1509678469.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:49.436Z,1509678469.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:49.461Z,1509678469.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:07:49.462Z,1509678469.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:49.832Z,1509678469.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:49.862Z,1509678469.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:07:49.863Z,1509678469.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:50.238Z,1509678470.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:50.263Z,1509678470.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:07:50.264Z,1509678470.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:50.636Z,1509678470.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:50.661Z,1509678470.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:07:50.662Z,1509678470.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:51.028Z,1509678471.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:51.051Z,1509678471.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:07:51.052Z,1509678471.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:51.436Z,1509678471.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:51.465Z,1509678471.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:07:51.466Z,1509678471.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:51.836Z,1509678471.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:51.865Z,1509678471.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:07:51.866Z,1509678471.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:52.236Z,1509678472.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:52.265Z,1509678472.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:07:52.266Z,1509678472.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:52.636Z,1509678472.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:52.665Z,1509678472.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:07:52.666Z,1509678472.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:53.039Z,1509678473.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:53.070Z,1509678473.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:07:53.071Z,1509678473.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:53.432Z,1509678473.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:53.459Z,1509678473.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:07:53.460Z,1509678473.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:53.836Z,1509678473.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:53.870Z,1509678473.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:07:53.871Z,1509678473.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:54.237Z,1509678474.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:54.270Z,1509678474.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:07:54.271Z,1509678474.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:54.638Z,1509678474.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:54.669Z,1509678474.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:07:54.670Z,1509678474.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:55.036Z,1509678475.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:55.070Z,1509678475.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:07:55.071Z,1509678475.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:55.437Z,1509678475.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:55.470Z,1509678475.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:07:55.471Z,1509678475.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:55.839Z,1509678475.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:55.869Z,1509678475.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:07:55.870Z,1509678475.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:56.236Z,1509678476.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:56.271Z,1509678476.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:07:56.272Z,1509678476.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:56.636Z,1509678476.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:56.663Z,1509678476.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:07:56.668Z,1509678476.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:57.032Z,1509678477.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:57.047Z,1509678477.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:07:57.048Z,1509678477.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:57.432Z,1509678477.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:57.446Z,1509678477.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:07:57.447Z,1509678477.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:57.837Z,1509678477.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:57.872Z,1509678477.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:07:57.873Z,1509678477.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:58.236Z,1509678478.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:58.251Z,1509678478.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:07:58.252Z,1509678478.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:58.636Z,1509678478.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:58.651Z,1509678478.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:07:58.651Z,1509678478.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:59.036Z,1509678479.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:59.051Z,1509678479.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:07:59.052Z,1509678479.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:59.435Z,1509678479.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:59.450Z,1509678479.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T03:07:59.451Z,1509678479.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:07:59.835Z,1509678479.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:07:59.849Z,1509678479.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:07:59.850Z,1509678479.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:00.243Z,1509678480.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:00.275Z,1509678480.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:08:00.276Z,1509678480.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:00.635Z,1509678480.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:00.698Z,1509678480.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:08:00.699Z,1509678480.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:01.039Z,1509678481.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:01.099Z,1509678481.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:08:01.099Z,1509678481.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:01.439Z,1509678481.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:01.454Z,1509678481.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T03:08:01.455Z,1509678481.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:01.839Z,1509678481.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:01.854Z,1509678481.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T03:08:01.855Z,1509678481.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:02.239Z,1509678482.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:02.281Z,1509678482.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:08:02.282Z,1509678482.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:02.639Z,1509678482.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:02.654Z,1509678482.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:08:02.655Z,1509678482.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:03.039Z,1509678483.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:03.086Z,1509678483.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:08:03.087Z,1509678483.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:03.439Z,1509678483.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:03.483Z,1509678483.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:08:03.485Z,1509678483.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:03.839Z,1509678483.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:03.854Z,1509678483.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:08:03.855Z,1509678483.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:04.239Z,1509678484.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:04.254Z,1509678484.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:08:04.255Z,1509678484.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:04.639Z,1509678484.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:04.653Z,1509678484.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:08:04.654Z,1509678484.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:05.039Z,1509678485.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:05.058Z,1509678485.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:08:05.059Z,1509678485.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:05.442Z,1509678485.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:05.457Z,1509678485.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T03:08:05.458Z,1509678485.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:05.842Z,1509678485.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:05.881Z,1509678485.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:08:05.882Z,1509678485.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:06.243Z,1509678486.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:06.278Z,1509678486.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:08:06.279Z,1509678486.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:06.635Z,1509678486.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:06.650Z,1509678486.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T03:08:06.651Z,1509678486.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:07.042Z,1509678487.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:07.056Z,1509678487.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:08:07.057Z,1509678487.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:07.440Z,1509678487.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:07.458Z,1509678487.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:08:07.459Z,1509678487.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:07.837Z,1509678487.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:07.851Z,1509678487.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T03:08:07.852Z,1509678487.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:08.240Z,1509678488.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:08.254Z,1509678488.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:08.640Z,1509678488.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:08.659Z,1509678488.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:09.035Z,1509678489.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:09.050Z,1509678489.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:09.440Z,1509678489.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:09.454Z,1509678489.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:09.842Z,1509678489.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:09.863Z,1509678489.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:10.235Z,1509678490.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:10.251Z,1509678490.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:10.623Z,1509678490.623 [NAL9602](INFO): Powering up NAL9602
2017-11-03T03:08:10.641Z,1509678490.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:10.656Z,1509678490.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:11.044Z,1509678491.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:11.059Z,1509678491.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:11.443Z,1509678491.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:11.458Z,1509678491.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:11.835Z,1509678491.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:11.850Z,1509678491.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:12.235Z,1509678492.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:12.250Z,1509678492.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:12.642Z,1509678492.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:12.663Z,1509678492.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:13.039Z,1509678493.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:13.055Z,1509678493.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:13.435Z,1509678493.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:13.450Z,1509678493.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:13.842Z,1509678493.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:13.858Z,1509678493.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:14.242Z,1509678494.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:14.263Z,1509678494.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:14.639Z,1509678494.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:14.658Z,1509678494.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:15.042Z,1509678495.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:15.063Z,1509678495.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:15.440Z,1509678495.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:15.499Z,1509678495.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:15.840Z,1509678495.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:15.901Z,1509678495.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:16.240Z,1509678496.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:16.259Z,1509678496.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:16.646Z,1509678496.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:16.691Z,1509678496.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:17.046Z,1509678497.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:17.061Z,1509678497.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:17.443Z,1509678497.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:17.499Z,1509678497.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:17.846Z,1509678497.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:17.895Z,1509678497.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:18.246Z,1509678498.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:18.261Z,1509678498.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:18.647Z,1509678498.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:18.662Z,1509678498.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:19.047Z,1509678499.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:19.061Z,1509678499.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:19.445Z,1509678499.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:19.460Z,1509678499.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:19.846Z,1509678499.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:19.862Z,1509678499.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:20.246Z,1509678500.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:20.261Z,1509678500.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:20.643Z,1509678500.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:20.658Z,1509678500.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:21.046Z,1509678501.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:21.062Z,1509678501.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:21.450Z,1509678501.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:21.465Z,1509678501.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:21.822Z,1509678501.822 [NAL9602](INFO): NAL9602 initialized
2017-11-03T03:08:21.850Z,1509678501.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:21.865Z,1509678501.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:22.246Z,1509678502.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:22.261Z,1509678502.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:22.654Z,1509678502.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:22.669Z,1509678502.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:23.053Z,1509678503.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:23.068Z,1509678503.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:23.449Z,1509678503.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:23.464Z,1509678503.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:23.846Z,1509678503.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:23.861Z,1509678503.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:24.245Z,1509678504.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:24.260Z,1509678504.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:24.647Z,1509678504.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:24.663Z,1509678504.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:25.046Z,1509678505.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:25.061Z,1509678505.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:25.450Z,1509678505.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:25.465Z,1509678505.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:25.852Z,1509678505.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:25.867Z,1509678505.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:26.250Z,1509678506.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:26.265Z,1509678506.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:26.645Z,1509678506.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:26.660Z,1509678506.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:27.046Z,1509678507.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:27.061Z,1509678507.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:27.447Z,1509678507.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:27.467Z,1509678507.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:27.845Z,1509678507.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:27.860Z,1509678507.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:28.249Z,1509678508.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:28.265Z,1509678508.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:28.650Z,1509678508.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:28.665Z,1509678508.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:29.049Z,1509678509.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:29.070Z,1509678509.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:29.445Z,1509678509.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:29.460Z,1509678509.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:29.843Z,1509678509.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:29.914Z,1509678509.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:30.240Z,1509678510.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:30.275Z,1509678510.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:30.646Z,1509678510.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:30.661Z,1509678510.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:31.046Z,1509678511.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:31.106Z,1509678511.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:31.451Z,1509678511.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:31.466Z,1509678511.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:31.852Z,1509678511.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:31.903Z,1509678511.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:32.251Z,1509678512.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:32.303Z,1509678512.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:32.642Z,1509678512.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:32.657Z,1509678512.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:33.045Z,1509678513.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:33.060Z,1509678513.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:33.448Z,1509678513.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:33.467Z,1509678513.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:33.846Z,1509678513.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:33.861Z,1509678513.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:34.252Z,1509678514.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:34.268Z,1509678514.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:34.654Z,1509678514.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:34.669Z,1509678514.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:35.049Z,1509678515.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:35.070Z,1509678515.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:35.445Z,1509678515.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:35.467Z,1509678515.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:35.847Z,1509678515.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:35.863Z,1509678515.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:36.247Z,1509678516.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:36.262Z,1509678516.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:39.336Z,1509678519.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:39.351Z,1509678519.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:39.480Z,1509678519.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:39.527Z,1509678519.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:39.901Z,1509678519.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:39.916Z,1509678519.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:40.305Z,1509678520.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:40.320Z,1509678520.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:40.701Z,1509678520.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:40.716Z,1509678520.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:41.091Z,1509678521.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:41.106Z,1509678521.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:41.493Z,1509678521.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:41.508Z,1509678521.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:41.890Z,1509678521.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:41.905Z,1509678521.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:42.301Z,1509678522.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:42.315Z,1509678522.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:42.702Z,1509678522.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:42.717Z,1509678522.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:43.101Z,1509678523.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:43.116Z,1509678523.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:43.491Z,1509678523.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:43.506Z,1509678523.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:43.891Z,1509678523.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:43.906Z,1509678523.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:44.290Z,1509678524.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:44.363Z,1509678524.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:44.683Z,1509678524.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:44.708Z,1509678524.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:45.083Z,1509678525.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:45.150Z,1509678525.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:45.505Z,1509678525.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:45.520Z,1509678525.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:45.897Z,1509678525.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:45.947Z,1509678525.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:46.302Z,1509678526.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:46.355Z,1509678526.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:46.683Z,1509678526.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:46.709Z,1509678526.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:47.076Z,1509678527.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:47.105Z,1509678527.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:47.482Z,1509678527.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:47.509Z,1509678527.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:47.883Z,1509678527.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:47.908Z,1509678527.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:48.314Z,1509678528.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:48.717Z,1509678528.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:49.116Z,1509678529.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:49.507Z,1509678529.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:49.906Z,1509678529.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:50.304Z,1509678530.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:50.706Z,1509678530.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:51.105Z,1509678531.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:51.516Z,1509678531.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:51.916Z,1509678531.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:52.313Z,1509678532.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:52.711Z,1509678532.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:53.109Z,1509678533.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:53.503Z,1509678533.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:53.908Z,1509678533.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:54.318Z,1509678534.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:54.727Z,1509678534.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:55.117Z,1509678535.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:55.514Z,1509678535.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:55.909Z,1509678535.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:56.305Z,1509678536.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:56.707Z,1509678536.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:57.104Z,1509678537.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:57.516Z,1509678537.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:57.916Z,1509678537.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:58.366Z,1509678538.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:58.713Z,1509678538.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:59.080Z,1509678539.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:59.150Z,1509678539.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:59.478Z,1509678539.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:59.505Z,1509678539.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:08:59.880Z,1509678539.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:08:59.918Z,1509678539.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:00.289Z,1509678540.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:00.340Z,1509678540.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:00.707Z,1509678540.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:00.722Z,1509678540.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:01.093Z,1509678541.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:01.157Z,1509678541.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:01.481Z,1509678541.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:01.534Z,1509678541.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:01.881Z,1509678541.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:01.913Z,1509678541.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:02.277Z,1509678542.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:02.293Z,1509678542.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:02.680Z,1509678542.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:02.695Z,1509678542.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:03.080Z,1509678543.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:03.096Z,1509678543.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:03.493Z,1509678543.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:03.523Z,1509678543.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:03.893Z,1509678543.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:03.920Z,1509678543.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:04.294Z,1509678544.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:04.320Z,1509678544.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:04.679Z,1509678544.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:04.722Z,1509678544.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:05.079Z,1509678545.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:05.094Z,1509678545.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:05.480Z,1509678545.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:05.495Z,1509678545.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:05.887Z,1509678545.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:05.927Z,1509678545.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:06.293Z,1509678546.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:06.324Z,1509678546.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:06.693Z,1509678546.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:06.725Z,1509678546.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:07.097Z,1509678547.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:07.129Z,1509678547.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:07.479Z,1509678547.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:07.494Z,1509678547.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:07.879Z,1509678547.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:07.895Z,1509678547.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:08.287Z,1509678548.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:08.307Z,1509678548.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:08.680Z,1509678548.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:08.705Z,1509678548.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:09.087Z,1509678549.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:09.102Z,1509678549.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:09.498Z,1509678549.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:09.529Z,1509678549.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:09.893Z,1509678549.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:09.907Z,1509678549.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:10.301Z,1509678550.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:10.328Z,1509678550.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:10.684Z,1509678550.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:10.707Z,1509678550.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:11.087Z,1509678551.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:11.106Z,1509678551.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:11.480Z,1509678551.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:11.495Z,1509678551.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:11.884Z,1509678551.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:11.903Z,1509678551.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:12.293Z,1509678552.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:12.308Z,1509678552.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:12.693Z,1509678552.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:12.728Z,1509678552.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:13.097Z,1509678553.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:13.129Z,1509678553.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:13.484Z,1509678553.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:13.554Z,1509678553.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:13.884Z,1509678553.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:13.954Z,1509678553.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:14.288Z,1509678554.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:14.311Z,1509678554.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:14.685Z,1509678554.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:14.731Z,1509678554.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:15.087Z,1509678555.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:15.102Z,1509678555.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:15.497Z,1509678555.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:15.551Z,1509678555.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:15.893Z,1509678555.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:15.938Z,1509678555.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:16.297Z,1509678556.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:16.312Z,1509678556.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:16.686Z,1509678556.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:16.707Z,1509678556.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:17.084Z,1509678557.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:17.099Z,1509678557.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:17.491Z,1509678557.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:17.507Z,1509678557.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:17.888Z,1509678557.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:17.903Z,1509678557.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:18.293Z,1509678558.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:18.308Z,1509678558.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:18.697Z,1509678558.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:18.712Z,1509678558.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:19.093Z,1509678559.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:19.109Z,1509678559.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:19.490Z,1509678559.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:19.504Z,1509678559.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:19.890Z,1509678559.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:19.905Z,1509678559.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:20.290Z,1509678560.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:20.305Z,1509678560.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:20.690Z,1509678560.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:20.705Z,1509678560.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:21.085Z,1509678561.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:21.100Z,1509678561.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:21.497Z,1509678561.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:21.513Z,1509678561.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:21.891Z,1509678561.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:21.906Z,1509678561.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:22.292Z,1509678562.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:22.307Z,1509678562.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:22.690Z,1509678562.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:22.705Z,1509678562.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:23.089Z,1509678563.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:23.104Z,1509678563.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:23.491Z,1509678563.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:23.506Z,1509678563.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:23.888Z,1509678563.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:23.903Z,1509678563.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:24.293Z,1509678564.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:24.308Z,1509678564.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:24.697Z,1509678564.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:24.734Z,1509678564.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:25.093Z,1509678565.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:25.109Z,1509678565.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:25.490Z,1509678565.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:25.504Z,1509678565.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:25.890Z,1509678565.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:25.905Z,1509678565.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:26.290Z,1509678566.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:26.305Z,1509678566.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:26.690Z,1509678566.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:26.705Z,1509678566.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:27.090Z,1509678567.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:27.105Z,1509678567.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:27.494Z,1509678567.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:27.509Z,1509678567.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:27.893Z,1509678567.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:27.976Z,1509678567.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:28.297Z,1509678568.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:28.312Z,1509678568.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:28.688Z,1509678568.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:28.743Z,1509678568.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:29.088Z,1509678569.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:29.110Z,1509678569.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:29.487Z,1509678569.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:29.543Z,1509678569.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:29.888Z,1509678569.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:29.943Z,1509678569.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:30.296Z,1509678570.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:30.311Z,1509678570.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:30.697Z,1509678570.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:30.713Z,1509678570.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:31.096Z,1509678571.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:31.111Z,1509678571.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:31.488Z,1509678571.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:31.503Z,1509678571.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:31.890Z,1509678571.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:31.905Z,1509678571.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:32.291Z,1509678572.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:32.306Z,1509678572.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:32.688Z,1509678572.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:32.703Z,1509678572.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:33.086Z,1509678573.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:33.105Z,1509678573.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:33.497Z,1509678573.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:33.512Z,1509678573.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:33.896Z,1509678573.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:33.911Z,1509678573.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:34.299Z,1509678574.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:34.314Z,1509678574.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:34.689Z,1509678574.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:34.704Z,1509678574.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:35.088Z,1509678575.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:35.110Z,1509678575.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:35.493Z,1509678575.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:35.507Z,1509678575.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:35.891Z,1509678575.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:09:35.915Z,1509678575.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:36.318Z,1509678576.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:39.436Z,1509678579.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:39.630Z,1509678579.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:39.992Z,1509678579.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:40.398Z,1509678580.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:40.792Z,1509678580.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:41.204Z,1509678581.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:41.609Z,1509678581.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:42.054Z,1509678582.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:42.424Z,1509678582.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:42.793Z,1509678582.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:43.223Z,1509678583.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:43.607Z,1509678583.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:44.046Z,1509678584.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:44.411Z,1509678584.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:44.412Z,1509678584.412 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:44.412Z,1509678584.412 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2017-11-03T03:09:44.412Z,1509678584.412 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:09:44.414Z,1509678584.414 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:44.414Z,1509678584.414 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2017-11-03T03:09:44.415Z,1509678584.415 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:09:44.489Z,1509678584.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:09:44.489Z,1509678584.489 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:09:44.830Z,1509678584.830 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:44.831Z,1509678584.831 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2017-11-03T03:09:44.831Z,1509678584.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:09:44.936Z,1509678584.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:09:44.937Z,1509678584.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:09:44.937Z,1509678584.937 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2017-11-03T03:09:44.937Z,1509678584.937 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:09:44.937Z,1509678584.937 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2017-11-03T03:09:45.178Z,1509678585.178 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:09:45.179Z,1509678585.179 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:09:45.179Z,1509678585.179 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:09:45.179Z,1509678585.179 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:09:45.180Z,1509678585.180 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:09:45.180Z,1509678585.180 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:09:45.284Z,1509678585.284 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:09:45.284Z,1509678585.284 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2017-11-03T03:09:45.579Z,1509678585.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:09:45.580Z,1509678585.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:09:45.580Z,1509678585.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:09:45.978Z,1509678585.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-03T03:09:45.979Z,1509678585.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:46.413Z,1509678586.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:09:46.414Z,1509678586.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:46.796Z,1509678586.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:09:46.813Z,1509678586.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:47.199Z,1509678587.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:09:47.222Z,1509678587.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:47.587Z,1509678587.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:09:47.589Z,1509678587.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:47.987Z,1509678587.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:09:47.988Z,1509678587.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:48.384Z,1509678588.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:09:48.385Z,1509678588.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:48.785Z,1509678588.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:09:48.786Z,1509678588.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:49.194Z,1509678589.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:09:49.195Z,1509678589.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:49.594Z,1509678589.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:09:49.595Z,1509678589.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:50.000Z,1509678590.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:09:50.017Z,1509678590.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:50.393Z,1509678590.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:09:50.394Z,1509678590.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:50.823Z,1509678590.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:09:50.824Z,1509678590.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:51.184Z,1509678591.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:09:51.186Z,1509678591.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:51.587Z,1509678591.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:09:51.589Z,1509678591.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:51.987Z,1509678591.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:09:51.988Z,1509678591.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:52.392Z,1509678592.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:09:52.393Z,1509678592.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:52.794Z,1509678592.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:09:52.796Z,1509678592.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:53.192Z,1509678593.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:09:53.193Z,1509678593.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:53.588Z,1509678593.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:09:53.589Z,1509678593.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:53.986Z,1509678593.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:09:53.987Z,1509678593.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:54.397Z,1509678594.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:09:54.398Z,1509678594.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:54.784Z,1509678594.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:09:54.785Z,1509678594.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:55.189Z,1509678595.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:09:55.190Z,1509678595.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:55.592Z,1509678595.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:09:55.593Z,1509678595.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:55.999Z,1509678595.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:09:56.001Z,1509678596.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:56.392Z,1509678596.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T03:09:56.393Z,1509678596.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:56.856Z,1509678596.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:09:56.857Z,1509678596.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:57.185Z,1509678597.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:09:57.186Z,1509678597.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:57.626Z,1509678597.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:09:57.627Z,1509678597.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:57.990Z,1509678597.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:09:57.991Z,1509678597.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:58.434Z,1509678598.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T03:09:58.435Z,1509678598.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:58.804Z,1509678598.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T03:09:58.806Z,1509678598.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:59.230Z,1509678599.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:09:59.231Z,1509678599.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:59.589Z,1509678599.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:09:59.590Z,1509678599.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:09:59.986Z,1509678599.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:09:59.987Z,1509678599.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:00.394Z,1509678600.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:10:00.395Z,1509678600.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:00.787Z,1509678600.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:10:00.788Z,1509678600.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:01.202Z,1509678601.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:10:01.203Z,1509678601.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:01.584Z,1509678601.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:01.602Z,1509678601.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:10:01.603Z,1509678601.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:01.985Z,1509678601.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:01.999Z,1509678601.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:10:02.001Z,1509678602.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:02.374Z,1509678602.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:02.397Z,1509678602.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T03:10:02.399Z,1509678602.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:02.774Z,1509678602.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:02.807Z,1509678602.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:10:02.808Z,1509678602.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:03.181Z,1509678603.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:03.196Z,1509678603.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:10:03.197Z,1509678603.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:03.584Z,1509678603.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:03.599Z,1509678603.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T03:10:03.601Z,1509678603.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:03.984Z,1509678603.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:04.006Z,1509678604.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:10:04.007Z,1509678604.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:04.370Z,1509678604.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:04.385Z,1509678604.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:10:04.386Z,1509678604.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:04.773Z,1509678604.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:04.788Z,1509678604.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T03:10:04.789Z,1509678604.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:05.175Z,1509678605.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:05.195Z,1509678605.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:05.585Z,1509678605.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:05.604Z,1509678605.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:05.984Z,1509678605.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:05.999Z,1509678605.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:06.384Z,1509678606.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:06.399Z,1509678606.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:06.775Z,1509678606.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:06.791Z,1509678606.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:07.172Z,1509678607.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:07.187Z,1509678607.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:07.575Z,1509678607.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:07.595Z,1509678607.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:07.976Z,1509678607.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:07.991Z,1509678607.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:08.384Z,1509678608.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:08.399Z,1509678608.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:08.784Z,1509678608.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:08.825Z,1509678608.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:09.185Z,1509678609.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:09.227Z,1509678609.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:09.572Z,1509678609.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:09.587Z,1509678609.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:09.975Z,1509678609.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:09.995Z,1509678609.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:10.376Z,1509678610.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:10.392Z,1509678610.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:10.772Z,1509678610.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:10.787Z,1509678610.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:11.184Z,1509678611.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:11.262Z,1509678611.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:11.589Z,1509678611.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:11.608Z,1509678611.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:11.989Z,1509678611.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:12.042Z,1509678612.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:12.364Z,1509678612.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:12.390Z,1509678612.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:12.761Z,1509678612.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:12.830Z,1509678612.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:13.164Z,1509678613.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:13.229Z,1509678613.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:13.586Z,1509678613.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:13.605Z,1509678613.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:13.982Z,1509678613.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:14.003Z,1509678614.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:14.388Z,1509678614.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:14.403Z,1509678614.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:14.767Z,1509678614.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:14.807Z,1509678614.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:15.167Z,1509678615.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:15.197Z,1509678615.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:15.568Z,1509678615.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:15.593Z,1509678615.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:15.967Z,1509678615.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:15.992Z,1509678615.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:16.390Z,1509678616.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:16.408Z,1509678616.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:16.786Z,1509678616.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:16.805Z,1509678616.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:17.185Z,1509678617.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:17.201Z,1509678617.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:17.567Z,1509678617.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:17.594Z,1509678617.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:17.964Z,1509678617.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:17.990Z,1509678617.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:18.378Z,1509678618.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:18.395Z,1509678618.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:18.767Z,1509678618.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:18.794Z,1509678618.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:19.186Z,1509678619.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:19.201Z,1509678619.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:19.589Z,1509678619.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:19.607Z,1509678619.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:19.982Z,1509678619.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:20.002Z,1509678620.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:20.367Z,1509678620.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:20.399Z,1509678620.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:20.767Z,1509678620.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:20.816Z,1509678620.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:21.190Z,1509678621.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:21.209Z,1509678621.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:21.586Z,1509678621.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:21.605Z,1509678621.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:21.985Z,1509678621.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:22.001Z,1509678622.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:22.367Z,1509678622.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:22.394Z,1509678622.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:22.768Z,1509678622.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:22.794Z,1509678622.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:23.167Z,1509678623.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:23.202Z,1509678623.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:23.586Z,1509678623.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:23.602Z,1509678623.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:23.985Z,1509678623.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:24.000Z,1509678624.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:24.381Z,1509678624.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:24.404Z,1509678624.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:24.764Z,1509678624.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:24.791Z,1509678624.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:25.168Z,1509678625.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:25.247Z,1509678625.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:25.568Z,1509678625.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:25.619Z,1509678625.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:25.961Z,1509678625.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:25.989Z,1509678625.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:26.378Z,1509678626.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:26.408Z,1509678626.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:26.790Z,1509678626.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:26.847Z,1509678626.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:27.191Z,1509678627.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:27.206Z,1509678627.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:27.565Z,1509678627.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:27.623Z,1509678627.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:27.960Z,1509678627.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:27.975Z,1509678627.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:28.364Z,1509678628.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:28.411Z,1509678628.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:28.768Z,1509678628.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:28.783Z,1509678628.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:29.163Z,1509678629.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:29.178Z,1509678629.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:29.578Z,1509678629.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:29.607Z,1509678629.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:29.977Z,1509678629.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:30.007Z,1509678630.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:30.377Z,1509678630.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:30.404Z,1509678630.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:30.763Z,1509678630.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:30.778Z,1509678630.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:31.163Z,1509678631.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:31.179Z,1509678631.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:31.571Z,1509678631.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:31.606Z,1509678631.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:31.963Z,1509678631.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:31.978Z,1509678631.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:32.377Z,1509678632.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:32.404Z,1509678632.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:32.777Z,1509678632.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:32.806Z,1509678632.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:33.177Z,1509678633.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:33.205Z,1509678633.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:33.563Z,1509678633.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:33.579Z,1509678633.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:33.963Z,1509678633.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:33.978Z,1509678633.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:34.364Z,1509678634.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:34.379Z,1509678634.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:34.764Z,1509678634.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:34.787Z,1509678634.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:35.163Z,1509678635.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:35.178Z,1509678635.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:35.577Z,1509678635.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:35.613Z,1509678635.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:35.981Z,1509678635.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:36.010Z,1509678636.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:36.013Z,1509678636.013 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T03:10:36.013Z,1509678636.013 [Default:CheckIn:C.Wait] Stopped
2017-11-03T03:10:36.013Z,1509678636.013 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T03:10:36.014Z,1509678636.014 [Default:CheckIn:D] Running Loop=1
2017-11-03T03:10:36.377Z,1509678636.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:36.408Z,1509678636.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:36.412Z,1509678636.412 [Default:CheckIn:D] Stopped
2017-11-03T03:10:36.412Z,1509678636.412 [Default:CheckIn:E] Running Loop=1
2017-11-03T03:10:39.475Z,1509678639.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:39.506Z,1509678639.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:39.510Z,1509678639.510 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.480762 min 
2017-11-03T03:10:39.510Z,1509678639.510 [Default:CheckIn:E] Stopped
2017-11-03T03:10:39.510Z,1509678639.510 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T03:10:39.510Z,1509678639.510 [Default:CheckIn] Stopped
2017-11-03T03:10:39.510Z,1509678639.510 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T03:10:39.511Z,1509678639.511 [Default:CheckIn](INFO): Running loop #18
2017-11-03T03:10:39.511Z,1509678639.511 [Default:CheckIn] Running Loop=18
2017-11-03T03:10:39.511Z,1509678639.511 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T03:10:39.511Z,1509678639.511 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T03:10:39.643Z,1509678639.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:39.679Z,1509678639.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:40.061Z,1509678640.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:40.077Z,1509678640.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:40.461Z,1509678640.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:40.534Z,1509678640.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:40.861Z,1509678640.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:40.876Z,1509678640.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:41.244Z,1509678641.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:41.295Z,1509678641.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:41.641Z,1509678641.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:41.668Z,1509678641.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:42.040Z,1509678642.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:42.110Z,1509678642.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:42.461Z,1509678642.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:42.499Z,1509678642.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:42.865Z,1509678642.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:42.880Z,1509678642.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:43.261Z,1509678643.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:43.276Z,1509678643.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:43.643Z,1509678643.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:43.667Z,1509678643.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:44.043Z,1509678644.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:44.069Z,1509678644.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:44.445Z,1509678644.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:44.474Z,1509678644.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:44.838Z,1509678644.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:44.869Z,1509678644.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:45.262Z,1509678645.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:45.277Z,1509678645.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:45.661Z,1509678645.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:45.676Z,1509678645.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:46.058Z,1509678646.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:46.078Z,1509678646.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:46.440Z,1509678646.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:46.471Z,1509678646.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:46.841Z,1509678646.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:46.871Z,1509678646.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:47.243Z,1509678647.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:47.267Z,1509678647.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:47.645Z,1509678647.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:47.671Z,1509678647.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:48.041Z,1509678648.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:48.070Z,1509678648.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:48.457Z,1509678648.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:48.472Z,1509678648.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:48.862Z,1509678648.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:48.877Z,1509678648.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:49.261Z,1509678649.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:49.276Z,1509678649.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:49.643Z,1509678649.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:49.668Z,1509678649.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:50.043Z,1509678650.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:50.071Z,1509678650.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:50.442Z,1509678650.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:50.468Z,1509678650.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:50.844Z,1509678650.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:50.869Z,1509678650.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:51.266Z,1509678651.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:51.281Z,1509678651.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:51.661Z,1509678651.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:51.676Z,1509678651.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:52.058Z,1509678652.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:52.078Z,1509678652.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:52.444Z,1509678652.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:52.471Z,1509678652.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:52.841Z,1509678652.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:52.874Z,1509678652.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:53.281Z,1509678653.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:53.319Z,1509678653.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:53.642Z,1509678653.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:53.683Z,1509678653.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:54.044Z,1509678654.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:54.082Z,1509678654.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:54.459Z,1509678654.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:54.568Z,1509678654.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:54.856Z,1509678654.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:54.890Z,1509678654.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:55.252Z,1509678655.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:10:55.295Z,1509678655.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:55.698Z,1509678655.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:56.091Z,1509678656.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:56.495Z,1509678656.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:56.919Z,1509678656.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:57.307Z,1509678657.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:57.711Z,1509678657.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:58.155Z,1509678658.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:58.496Z,1509678658.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:58.891Z,1509678658.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:59.300Z,1509678659.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:10:59.691Z,1509678659.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:00.093Z,1509678660.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:00.531Z,1509678660.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:00.939Z,1509678660.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:01.295Z,1509678661.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:01.699Z,1509678661.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:02.135Z,1509678662.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:02.489Z,1509678662.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:02.910Z,1509678662.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:03.271Z,1509678663.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:03.676Z,1509678663.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:04.074Z,1509678664.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:04.456Z,1509678664.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:04.856Z,1509678664.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:05.260Z,1509678665.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:05.657Z,1509678665.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:06.057Z,1509678666.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:06.469Z,1509678666.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:06.879Z,1509678666.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:07.269Z,1509678667.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:07.659Z,1509678667.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:08.056Z,1509678668.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:08.459Z,1509678668.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:08.843Z,1509678668.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:11:08.858Z,1509678668.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:09.253Z,1509678669.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:11:09.314Z,1509678669.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:09.654Z,1509678669.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:11:09.669Z,1509678669.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:10.099Z,1509678670.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:10.455Z,1509678670.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:10.891Z,1509678670.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:11.279Z,1509678671.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:11.661Z,1509678671.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:12.057Z,1509678672.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:12.478Z,1509678672.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:12.872Z,1509678672.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:13.269Z,1509678673.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:13.662Z,1509678673.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:14.118Z,1509678674.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:14.475Z,1509678674.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:14.874Z,1509678674.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:15.319Z,1509678675.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:15.711Z,1509678675.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:16.098Z,1509678676.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:16.468Z,1509678676.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:16.884Z,1509678676.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:17.266Z,1509678677.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:17.687Z,1509678677.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:18.085Z,1509678678.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:18.470Z,1509678678.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:18.869Z,1509678678.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:19.268Z,1509678679.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:19.666Z,1509678679.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:20.066Z,1509678680.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:20.463Z,1509678680.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:20.866Z,1509678680.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:21.273Z,1509678681.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:21.669Z,1509678681.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:22.074Z,1509678682.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:22.464Z,1509678682.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:22.914Z,1509678682.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:23.283Z,1509678683.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:23.665Z,1509678683.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:24.078Z,1509678684.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:24.507Z,1509678684.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:24.876Z,1509678684.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:25.311Z,1509678685.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:25.706Z,1509678685.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:26.064Z,1509678686.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:26.466Z,1509678686.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:26.865Z,1509678686.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:27.281Z,1509678687.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:27.680Z,1509678687.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:28.082Z,1509678688.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:28.465Z,1509678688.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:28.875Z,1509678688.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:29.268Z,1509678689.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:29.666Z,1509678689.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:30.064Z,1509678690.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:30.476Z,1509678690.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:30.871Z,1509678690.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:31.276Z,1509678691.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:31.670Z,1509678691.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:32.068Z,1509678692.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:32.469Z,1509678692.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:32.871Z,1509678692.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:33.277Z,1509678693.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:33.675Z,1509678693.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:34.082Z,1509678694.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:34.471Z,1509678694.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:34.865Z,1509678694.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:35.265Z,1509678695.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:35.669Z,1509678695.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:36.067Z,1509678696.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:36.477Z,1509678696.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:39.627Z,1509678699.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:39.782Z,1509678699.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:40.171Z,1509678700.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:40.610Z,1509678700.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:40.974Z,1509678700.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:41.403Z,1509678701.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:41.822Z,1509678701.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:42.180Z,1509678702.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:42.578Z,1509678702.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:42.975Z,1509678702.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:43.359Z,1509678703.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:43.758Z,1509678703.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:43.869Z,1509678703.869 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T03:11:44.159Z,1509678704.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:44.527Z,1509678704.527 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T03:11:44.527Z,1509678704.527 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T03:11:44.527Z,1509678704.527 [DropWeight](ERROR): Hardware Fault
2017-11-03T03:11:44.602Z,1509678704.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:44.691Z,1509678704.691 [CBIT](INFO): Critical error at 20171103T031144
2017-11-03T03:11:44.693Z,1509678704.693 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T03:11:44.693Z,1509678704.693 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T03:11:44.986Z,1509678704.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:45.064Z,1509678705.064 [CBIT](INFO): Critical error at 20171103T031144
2017-11-03T03:11:45.382Z,1509678705.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:45.759Z,1509678705.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:46.158Z,1509678706.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:46.559Z,1509678706.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:46.975Z,1509678706.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:47.386Z,1509678707.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:47.783Z,1509678707.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:48.179Z,1509678708.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:48.572Z,1509678708.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:48.979Z,1509678708.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:49.359Z,1509678709.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:49.787Z,1509678709.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:50.161Z,1509678710.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:50.582Z,1509678710.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:50.990Z,1509678710.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:51.391Z,1509678711.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:51.760Z,1509678711.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:52.159Z,1509678712.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:52.554Z,1509678712.554 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T03:11:52.554Z,1509678712.554 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:11:52.554Z,1509678712.554 [BPC1](ERROR): Data Fault
2017-11-03T03:11:52.562Z,1509678712.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:52.665Z,1509678712.665 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:11:52.971Z,1509678712.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:53.372Z,1509678713.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:53.783Z,1509678713.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:53.861Z,1509678713.861 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:11:53.861Z,1509678713.861 [BPC1] No Fault, FailCount= 1
2017-11-03T03:11:54.231Z,1509678714.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:54.608Z,1509678714.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:54.970Z,1509678714.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:55.377Z,1509678715.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:55.769Z,1509678715.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:56.169Z,1509678716.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:56.580Z,1509678716.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:56.986Z,1509678716.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:57.380Z,1509678717.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:57.776Z,1509678717.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:58.170Z,1509678718.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:58.570Z,1509678718.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:58.969Z,1509678718.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:59.380Z,1509678719.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:11:59.781Z,1509678719.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:00.184Z,1509678720.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:00.575Z,1509678720.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:00.973Z,1509678720.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:01.371Z,1509678721.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:01.772Z,1509678721.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:02.171Z,1509678722.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:02.582Z,1509678722.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:02.986Z,1509678722.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:03.383Z,1509678723.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:03.778Z,1509678723.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:04.171Z,1509678724.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:04.571Z,1509678724.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:04.999Z,1509678724.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:05.378Z,1509678725.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:05.788Z,1509678725.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:06.181Z,1509678726.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:06.601Z,1509678726.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:06.973Z,1509678726.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:07.403Z,1509678727.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:07.771Z,1509678727.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:08.195Z,1509678728.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:08.618Z,1509678728.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:08.986Z,1509678728.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:09.381Z,1509678729.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:09.775Z,1509678729.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:10.173Z,1509678730.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:10.574Z,1509678730.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:10.971Z,1509678730.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:11.380Z,1509678731.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:11.781Z,1509678731.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:12.180Z,1509678732.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:12.579Z,1509678732.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:12.975Z,1509678732.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:13.359Z,1509678733.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:13.760Z,1509678733.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:14.159Z,1509678734.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:14.587Z,1509678734.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:14.986Z,1509678734.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:15.380Z,1509678735.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:15.777Z,1509678735.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:16.159Z,1509678736.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:16.560Z,1509678736.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:16.979Z,1509678736.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:17.380Z,1509678737.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:17.791Z,1509678737.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:18.179Z,1509678738.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:18.559Z,1509678738.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:18.959Z,1509678738.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:19.395Z,1509678739.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:19.760Z,1509678739.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:20.179Z,1509678740.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:20.587Z,1509678740.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:21.007Z,1509678741.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:21.380Z,1509678741.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:21.795Z,1509678741.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:22.159Z,1509678742.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:22.599Z,1509678742.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:22.995Z,1509678742.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:23.387Z,1509678743.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:23.791Z,1509678743.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:24.179Z,1509678744.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:24.579Z,1509678744.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:24.979Z,1509678744.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:25.377Z,1509678745.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:25.780Z,1509678745.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:26.179Z,1509678746.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:26.579Z,1509678746.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:26.987Z,1509678746.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:27.383Z,1509678747.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:27.775Z,1509678747.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:28.145Z,1509678748.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:28.159Z,1509678748.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:28.551Z,1509678748.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:28.580Z,1509678748.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:28.948Z,1509678748.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:28.971Z,1509678748.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:29.357Z,1509678749.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:29.387Z,1509678749.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:29.771Z,1509678749.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:29.787Z,1509678749.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:30.164Z,1509678750.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:30.179Z,1509678750.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:30.547Z,1509678750.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:30.578Z,1509678750.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:30.947Z,1509678750.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:30.962Z,1509678750.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:31.345Z,1509678751.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:12:31.360Z,1509678751.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:31.785Z,1509678751.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:32.159Z,1509678752.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:32.581Z,1509678752.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:32.995Z,1509678752.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:33.381Z,1509678753.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:33.799Z,1509678753.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:34.158Z,1509678754.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:34.586Z,1509678754.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:34.983Z,1509678754.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:35.415Z,1509678755.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:35.787Z,1509678755.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:36.215Z,1509678756.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:36.565Z,1509678756.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:39.690Z,1509678759.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:39.867Z,1509678759.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:40.291Z,1509678760.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:40.696Z,1509678760.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:41.055Z,1509678761.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:41.445Z,1509678761.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:41.846Z,1509678761.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:42.266Z,1509678762.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:42.658Z,1509678762.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:43.054Z,1509678763.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:43.447Z,1509678763.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:43.846Z,1509678763.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:44.252Z,1509678764.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:44.655Z,1509678764.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:45.051Z,1509678765.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:45.448Z,1509678765.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:45.449Z,1509678765.449 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:45.449Z,1509678765.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2017-11-03T03:12:45.449Z,1509678765.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:12:45.451Z,1509678765.451 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:45.451Z,1509678765.451 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2017-11-03T03:12:45.451Z,1509678765.451 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:12:45.541Z,1509678765.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:12:45.541Z,1509678765.541 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:12:45.848Z,1509678765.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:45.848Z,1509678765.848 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2017-11-03T03:12:45.848Z,1509678765.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:12:45.940Z,1509678765.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:12:45.941Z,1509678765.941 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:12:45.941Z,1509678765.941 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2017-11-03T03:12:45.941Z,1509678765.941 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:12:45.941Z,1509678765.941 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2017-11-03T03:12:46.251Z,1509678766.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:12:46.251Z,1509678766.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:12:46.252Z,1509678766.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:12:46.252Z,1509678766.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:12:46.253Z,1509678766.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:12:46.253Z,1509678766.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:12:46.329Z,1509678766.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:12:46.329Z,1509678766.329 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2017-11-03T03:12:46.661Z,1509678766.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:12:46.661Z,1509678766.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:12:46.661Z,1509678766.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:12:47.055Z,1509678767.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:12:47.057Z,1509678767.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:47.452Z,1509678767.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:12:47.453Z,1509678767.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:47.859Z,1509678767.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:12:47.860Z,1509678767.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:48.258Z,1509678768.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:12:48.259Z,1509678768.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:48.661Z,1509678768.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:12:48.662Z,1509678768.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:49.054Z,1509678769.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:12:49.055Z,1509678769.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:49.453Z,1509678769.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:12:49.454Z,1509678769.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:49.834Z,1509678769.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:12:49.835Z,1509678769.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:50.260Z,1509678770.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:12:50.261Z,1509678770.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:50.706Z,1509678770.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T03:12:50.707Z,1509678770.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:51.056Z,1509678771.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:12:51.057Z,1509678771.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:51.434Z,1509678771.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:12:51.435Z,1509678771.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:51.858Z,1509678771.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:12:51.859Z,1509678771.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:52.279Z,1509678772.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:12:52.280Z,1509678772.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:52.660Z,1509678772.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:12:52.665Z,1509678772.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:53.065Z,1509678773.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:12:53.066Z,1509678773.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:53.470Z,1509678773.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:12:53.471Z,1509678773.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:53.837Z,1509678773.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:12:53.838Z,1509678773.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:54.274Z,1509678774.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:12:54.275Z,1509678774.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:54.664Z,1509678774.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:12:54.665Z,1509678774.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:55.041Z,1509678775.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:12:55.042Z,1509678775.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:55.467Z,1509678775.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:12:55.468Z,1509678775.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:55.865Z,1509678775.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:12:55.866Z,1509678775.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:56.247Z,1509678776.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:12:56.264Z,1509678776.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:56.639Z,1509678776.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:12:56.640Z,1509678776.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:57.035Z,1509678777.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:12:57.036Z,1509678777.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:57.438Z,1509678777.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T03:12:57.439Z,1509678777.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:57.839Z,1509678777.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:12:57.840Z,1509678777.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:58.238Z,1509678778.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:12:58.239Z,1509678778.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:58.668Z,1509678778.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:12:58.669Z,1509678778.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:59.066Z,1509678779.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:12:59.067Z,1509678779.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:59.437Z,1509678779.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T03:12:59.438Z,1509678779.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:12:59.846Z,1509678779.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T03:12:59.847Z,1509678779.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:00.238Z,1509678780.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:13:00.239Z,1509678780.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:00.638Z,1509678780.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:13:00.639Z,1509678780.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:01.042Z,1509678781.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:13:01.043Z,1509678781.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:01.466Z,1509678781.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:13:01.467Z,1509678781.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:01.865Z,1509678781.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:13:01.866Z,1509678781.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:02.262Z,1509678782.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:13:02.263Z,1509678782.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:02.638Z,1509678782.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:13:02.639Z,1509678782.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:03.037Z,1509678783.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:13:03.038Z,1509678783.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:03.443Z,1509678783.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T03:13:03.444Z,1509678783.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:03.838Z,1509678783.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:13:03.839Z,1509678783.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:04.265Z,1509678784.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:13:04.266Z,1509678784.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:04.665Z,1509678784.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T03:13:04.666Z,1509678784.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:05.066Z,1509678785.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:13:05.067Z,1509678785.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:05.477Z,1509678785.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:13:05.478Z,1509678785.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:05.843Z,1509678785.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T03:13:05.844Z,1509678785.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:06.238Z,1509678786.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:06.642Z,1509678786.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:07.086Z,1509678787.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:07.452Z,1509678787.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:07.852Z,1509678787.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:08.290Z,1509678788.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:08.638Z,1509678788.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:09.071Z,1509678789.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:09.475Z,1509678789.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:09.838Z,1509678789.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:10.251Z,1509678790.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:10.670Z,1509678790.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:11.048Z,1509678791.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:11.439Z,1509678791.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:11.841Z,1509678791.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:12.269Z,1509678792.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:12.651Z,1509678792.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:13.052Z,1509678793.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:13.443Z,1509678793.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:13.838Z,1509678793.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:14.243Z,1509678794.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:14.647Z,1509678794.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:15.038Z,1509678795.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:15.444Z,1509678795.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:15.852Z,1509678795.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:16.251Z,1509678796.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:16.639Z,1509678796.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:17.039Z,1509678797.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:17.438Z,1509678797.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:17.842Z,1509678797.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:18.269Z,1509678798.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:18.673Z,1509678798.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:19.045Z,1509678799.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:19.439Z,1509678799.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:19.876Z,1509678799.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:20.244Z,1509678800.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:20.648Z,1509678800.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:21.048Z,1509678801.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:21.502Z,1509678801.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:21.848Z,1509678801.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:22.263Z,1509678802.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:22.698Z,1509678802.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:23.063Z,1509678803.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:23.471Z,1509678803.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:23.867Z,1509678803.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:24.257Z,1509678804.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:24.666Z,1509678804.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:25.056Z,1509678805.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:25.446Z,1509678805.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:25.847Z,1509678805.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:26.253Z,1509678806.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:26.656Z,1509678806.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:27.062Z,1509678807.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:27.449Z,1509678807.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:27.850Z,1509678807.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:28.256Z,1509678808.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:28.661Z,1509678808.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:29.057Z,1509678809.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:29.446Z,1509678809.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:29.849Z,1509678809.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:30.257Z,1509678810.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:30.658Z,1509678810.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:31.053Z,1509678811.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:31.448Z,1509678811.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:31.849Z,1509678811.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:32.257Z,1509678812.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:32.654Z,1509678812.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:33.056Z,1509678813.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:33.447Z,1509678813.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:33.851Z,1509678813.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:34.256Z,1509678814.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:34.695Z,1509678814.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:35.049Z,1509678815.049 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T03:13:35.049Z,1509678815.049 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:13:35.049Z,1509678815.049 [BPC1](ERROR): Data Fault
2017-11-03T03:13:35.057Z,1509678815.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:35.137Z,1509678815.137 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:13:35.452Z,1509678815.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:35.831Z,1509678815.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:36.263Z,1509678816.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:36.341Z,1509678816.341 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:13:36.341Z,1509678816.341 [BPC1] No Fault, FailCount= 1
2017-11-03T03:13:36.711Z,1509678816.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:39.766Z,1509678819.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:39.930Z,1509678819.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:40.315Z,1509678820.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:40.714Z,1509678820.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:41.111Z,1509678821.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:41.519Z,1509678821.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:41.916Z,1509678821.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:42.319Z,1509678822.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:42.714Z,1509678822.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:43.113Z,1509678823.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:43.510Z,1509678823.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:43.908Z,1509678823.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:44.316Z,1509678824.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:44.727Z,1509678824.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:45.122Z,1509678825.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:45.505Z,1509678825.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:45.908Z,1509678825.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:46.303Z,1509678826.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:46.711Z,1509678826.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:47.108Z,1509678827.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:47.522Z,1509678827.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:47.923Z,1509678827.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:48.319Z,1509678828.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:48.708Z,1509678828.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:49.109Z,1509678829.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:49.510Z,1509678829.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:49.907Z,1509678829.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:50.320Z,1509678830.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:50.762Z,1509678830.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:51.126Z,1509678831.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:51.519Z,1509678831.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:51.935Z,1509678831.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:52.284Z,1509678832.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:13:52.310Z,1509678832.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:52.688Z,1509678832.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:13:52.714Z,1509678832.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:53.085Z,1509678833.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:13:53.154Z,1509678833.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:53.519Z,1509678833.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:53.962Z,1509678833.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:54.358Z,1509678834.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:54.718Z,1509678834.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:55.111Z,1509678835.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:55.515Z,1509678835.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:55.908Z,1509678835.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:56.320Z,1509678836.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:56.727Z,1509678836.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:57.126Z,1509678837.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:57.510Z,1509678837.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:57.917Z,1509678837.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:58.310Z,1509678838.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:58.710Z,1509678838.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:59.107Z,1509678839.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:59.519Z,1509678839.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:13:59.925Z,1509678839.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:00.320Z,1509678840.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:00.714Z,1509678840.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:01.113Z,1509678841.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:01.512Z,1509678841.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:01.909Z,1509678841.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:02.317Z,1509678842.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:02.720Z,1509678842.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:03.123Z,1509678843.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:03.519Z,1509678843.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:03.908Z,1509678843.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:04.315Z,1509678844.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:04.712Z,1509678844.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:05.108Z,1509678845.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:05.535Z,1509678845.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:05.923Z,1509678845.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:06.319Z,1509678846.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:06.716Z,1509678846.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:07.095Z,1509678847.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:07.516Z,1509678847.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:07.918Z,1509678847.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:08.321Z,1509678848.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:08.727Z,1509678848.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:09.122Z,1509678849.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:09.489Z,1509678849.489 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:14:09.489Z,1509678849.489 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:14:09.489Z,1509678849.489 [BPC1](ERROR): Communications Fault
2017-11-03T03:14:09.509Z,1509678849.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:09.605Z,1509678849.605 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:14:09.922Z,1509678849.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:10.299Z,1509678850.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:10.716Z,1509678850.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:10.806Z,1509678850.806 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:14:10.806Z,1509678850.806 [BPC1] No Fault, FailCount= 1
2017-11-03T03:14:11.166Z,1509678851.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:11.519Z,1509678851.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:11.921Z,1509678851.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:12.324Z,1509678852.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:12.718Z,1509678852.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:13.100Z,1509678853.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:13.517Z,1509678853.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:13.917Z,1509678853.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:14.321Z,1509678854.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:14.721Z,1509678854.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:15.140Z,1509678855.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:15.499Z,1509678855.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:15.921Z,1509678855.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:16.299Z,1509678856.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:16.700Z,1509678856.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:17.118Z,1509678857.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:17.522Z,1509678857.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:17.918Z,1509678857.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:18.323Z,1509678858.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:18.716Z,1509678858.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:19.099Z,1509678859.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:19.518Z,1509678859.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:19.916Z,1509678859.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:20.321Z,1509678860.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:20.747Z,1509678860.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:21.126Z,1509678861.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:21.498Z,1509678861.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:21.899Z,1509678861.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:22.299Z,1509678862.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:22.723Z,1509678862.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:23.098Z,1509678863.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:23.530Z,1509678863.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:23.922Z,1509678863.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:24.327Z,1509678864.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:24.725Z,1509678864.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:25.098Z,1509678865.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:25.503Z,1509678865.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:25.940Z,1509678865.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:26.330Z,1509678866.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:26.726Z,1509678866.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:27.131Z,1509678867.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:27.498Z,1509678867.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:27.943Z,1509678867.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:28.298Z,1509678868.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:28.739Z,1509678868.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:29.098Z,1509678869.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:29.551Z,1509678869.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:29.922Z,1509678869.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:30.320Z,1509678870.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:30.698Z,1509678870.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:31.098Z,1509678871.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:31.500Z,1509678871.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:31.922Z,1509678871.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:32.321Z,1509678872.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:32.726Z,1509678872.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:33.120Z,1509678873.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:33.498Z,1509678873.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:33.899Z,1509678873.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:34.321Z,1509678874.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:34.699Z,1509678874.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:35.121Z,1509678875.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:35.520Z,1509678875.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:35.924Z,1509678875.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:36.322Z,1509678876.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:36.701Z,1509678876.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:39.823Z,1509678879.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:39.985Z,1509678879.985 [BPC1](ERROR): Failed to parse message.
2017-11-03T03:14:39.985Z,1509678879.985 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T03:14:39.985Z,1509678879.985 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:14:39.985Z,1509678879.985 [BPC1](ERROR): Data Fault
2017-11-03T03:14:39.999Z,1509678879.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:40.101Z,1509678880.101 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:14:40.395Z,1509678880.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:40.799Z,1509678880.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:41.195Z,1509678881.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:41.301Z,1509678881.301 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:14:41.301Z,1509678881.301 [BPC1] No Fault, FailCount= 1
2017-11-03T03:14:41.627Z,1509678881.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:42.018Z,1509678882.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:42.377Z,1509678882.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:42.780Z,1509678882.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:43.179Z,1509678883.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:43.589Z,1509678883.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:43.994Z,1509678883.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:44.385Z,1509678884.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:44.778Z,1509678884.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:45.181Z,1509678885.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:45.581Z,1509678885.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:45.983Z,1509678885.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:46.384Z,1509678886.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:46.785Z,1509678886.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:47.199Z,1509678887.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:47.554Z,1509678887.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:47.580Z,1509678887.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:47.948Z,1509678887.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:47.975Z,1509678887.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:48.349Z,1509678888.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:48.376Z,1509678888.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:48.755Z,1509678888.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:48.785Z,1509678888.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:49.155Z,1509678889.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:49.186Z,1509678889.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:49.573Z,1509678889.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:49.595Z,1509678889.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:49.976Z,1509678889.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:49.991Z,1509678889.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:50.374Z,1509678890.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:50.399Z,1509678890.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:50.754Z,1509678890.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:50.785Z,1509678890.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:51.154Z,1509678891.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:51.185Z,1509678891.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:51.555Z,1509678891.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:51.586Z,1509678891.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:51.955Z,1509678891.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:51.985Z,1509678891.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:52.374Z,1509678892.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:52.389Z,1509678892.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:52.778Z,1509678892.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:52.843Z,1509678892.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:53.173Z,1509678893.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:53.195Z,1509678893.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:53.554Z,1509678893.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:53.586Z,1509678893.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:53.951Z,1509678893.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:54.008Z,1509678894.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:54.356Z,1509678894.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:54.386Z,1509678894.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:54.756Z,1509678894.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:54.799Z,1509678894.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:55.155Z,1509678895.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:55.187Z,1509678895.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:55.574Z,1509678895.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:55.634Z,1509678895.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:55.974Z,1509678895.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:56.031Z,1509678896.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:56.374Z,1509678896.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:56.390Z,1509678896.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:56.754Z,1509678896.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:56.786Z,1509678896.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:57.151Z,1509678897.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:57.188Z,1509678897.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:57.556Z,1509678897.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:57.588Z,1509678897.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:57.955Z,1509678897.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:57.986Z,1509678897.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:58.373Z,1509678898.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:58.389Z,1509678898.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:58.761Z,1509678898.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:58.796Z,1509678898.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:59.174Z,1509678899.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:59.195Z,1509678899.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:59.554Z,1509678899.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:59.585Z,1509678899.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:14:59.954Z,1509678899.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:14:59.987Z,1509678899.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:00.355Z,1509678900.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:00.386Z,1509678900.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:00.755Z,1509678900.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:00.785Z,1509678900.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:01.152Z,1509678901.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:01.188Z,1509678901.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:01.565Z,1509678901.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:01.599Z,1509678901.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:01.978Z,1509678901.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:01.993Z,1509678901.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:02.365Z,1509678902.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:02.395Z,1509678902.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:02.755Z,1509678902.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:02.787Z,1509678902.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:03.154Z,1509678903.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:03.187Z,1509678903.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:03.556Z,1509678903.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:03.591Z,1509678903.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:03.955Z,1509678903.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:03.986Z,1509678903.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:04.364Z,1509678904.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:04.386Z,1509678904.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:04.775Z,1509678904.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:04.817Z,1509678904.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:05.165Z,1509678905.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:05.195Z,1509678905.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:05.558Z,1509678905.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:05.587Z,1509678905.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:05.951Z,1509678905.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:05.991Z,1509678905.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:06.353Z,1509678906.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:06.368Z,1509678906.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:06.755Z,1509678906.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:06.807Z,1509678906.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:07.160Z,1509678907.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:07.183Z,1509678907.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:07.565Z,1509678907.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:07.581Z,1509678907.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:07.973Z,1509678907.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:08.005Z,1509678908.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:08.366Z,1509678908.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:08.411Z,1509678908.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:08.759Z,1509678908.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:08.775Z,1509678908.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:09.155Z,1509678909.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:09.170Z,1509678909.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:09.563Z,1509678909.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:09.615Z,1509678909.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:09.960Z,1509678909.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:09.975Z,1509678909.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:10.363Z,1509678910.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:10.416Z,1509678910.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:10.765Z,1509678910.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:10.823Z,1509678910.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:11.166Z,1509678911.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:11.181Z,1509678911.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:11.555Z,1509678911.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:11.570Z,1509678911.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:11.960Z,1509678911.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:11.975Z,1509678911.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:12.359Z,1509678912.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:12.379Z,1509678912.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:12.761Z,1509678912.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:12.776Z,1509678912.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:13.160Z,1509678913.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:13.175Z,1509678913.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:13.566Z,1509678913.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:13.581Z,1509678913.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:13.963Z,1509678913.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:13.978Z,1509678913.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:14.366Z,1509678914.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:14.381Z,1509678914.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:14.759Z,1509678914.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:14.774Z,1509678914.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:15.155Z,1509678915.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:15.170Z,1509678915.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:15.563Z,1509678915.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:15.583Z,1509678915.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:15.959Z,1509678915.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:15.974Z,1509678915.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:16.363Z,1509678916.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:16.378Z,1509678916.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:16.768Z,1509678916.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:16.783Z,1509678916.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:17.168Z,1509678917.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:17.183Z,1509678917.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:17.562Z,1509678917.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:17.577Z,1509678917.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:17.961Z,1509678917.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:17.976Z,1509678917.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:18.360Z,1509678918.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:18.375Z,1509678918.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:18.763Z,1509678918.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:18.778Z,1509678918.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:19.161Z,1509678919.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:19.176Z,1509678919.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:19.568Z,1509678919.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:19.583Z,1509678919.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:19.968Z,1509678919.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:19.990Z,1509678919.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:20.369Z,1509678920.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:20.384Z,1509678920.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:20.761Z,1509678920.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:20.776Z,1509678920.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:21.161Z,1509678921.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:21.176Z,1509678921.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:21.558Z,1509678921.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:21.620Z,1509678921.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:21.961Z,1509678921.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:21.976Z,1509678921.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:22.372Z,1509678922.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:22.387Z,1509678922.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:22.773Z,1509678922.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:22.789Z,1509678922.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:23.173Z,1509678923.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:23.234Z,1509678923.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:23.552Z,1509678923.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:23.584Z,1509678923.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:23.955Z,1509678923.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:24.021Z,1509678924.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:24.353Z,1509678924.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:24.382Z,1509678924.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:24.748Z,1509678924.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:24.803Z,1509678924.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:25.155Z,1509678925.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:25.221Z,1509678925.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:25.573Z,1509678925.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:25.599Z,1509678925.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:25.973Z,1509678925.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:25.995Z,1509678925.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:26.373Z,1509678926.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:26.388Z,1509678926.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:26.752Z,1509678926.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:26.782Z,1509678926.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:27.148Z,1509678927.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:27.177Z,1509678927.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:27.555Z,1509678927.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:27.581Z,1509678927.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:27.954Z,1509678927.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:27.980Z,1509678927.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:28.373Z,1509678928.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:28.394Z,1509678928.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:28.773Z,1509678928.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:28.789Z,1509678928.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:29.173Z,1509678929.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:29.195Z,1509678929.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:29.551Z,1509678929.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:29.576Z,1509678929.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:29.955Z,1509678929.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:29.982Z,1509678929.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:30.353Z,1509678930.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:30.383Z,1509678930.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:30.754Z,1509678930.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:30.779Z,1509678930.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:31.144Z,1509678931.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:31.168Z,1509678931.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:31.574Z,1509678931.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:31.595Z,1509678931.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:31.978Z,1509678931.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:32.001Z,1509678932.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:32.373Z,1509678932.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:32.395Z,1509678932.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:32.752Z,1509678932.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:32.783Z,1509678932.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:33.155Z,1509678933.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:33.187Z,1509678933.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:33.553Z,1509678933.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:33.588Z,1509678933.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:33.954Z,1509678933.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:34.007Z,1509678934.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:34.365Z,1509678934.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:34.395Z,1509678934.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:34.761Z,1509678934.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:34.790Z,1509678934.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:35.177Z,1509678935.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:35.197Z,1509678935.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:35.555Z,1509678935.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:35.592Z,1509678935.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:35.955Z,1509678935.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:36.013Z,1509678936.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:36.355Z,1509678936.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:36.390Z,1509678936.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:36.756Z,1509678936.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:36.794Z,1509678936.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:39.839Z,1509678939.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:39.910Z,1509678939.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:39.914Z,1509678939.914 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T03:10:39.5Z
2017-11-03T03:15:39.914Z,1509678939.914 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T03:15:39.914Z,1509678939.914 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T03:15:40.058Z,1509678940.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:40.086Z,1509678940.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:40.561Z,1509678940.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:40.586Z,1509678940.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:40.854Z,1509678940.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:40.886Z,1509678940.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:41.240Z,1509678941.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:41.256Z,1509678941.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:41.641Z,1509678941.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:41.686Z,1509678941.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:44.732Z,1509678944.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:44.747Z,1509678944.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:44.861Z,1509678944.861 [DataOverHttps](INFO): Sending 119 bytes from file Logs/20171103T001125/Courier0072.lzma
2017-11-03T03:15:44.903Z,1509678944.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:44.951Z,1509678944.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:45.295Z,1509678945.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:45.355Z,1509678945.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:45.659Z,1509678945.659 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0072.lzma.bak
2017-11-03T03:15:45.659Z,1509678945.659 [DataOverHttps](INFO): SBD MOMSN=5182568
2017-11-03T03:15:45.696Z,1509678945.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:15:45.720Z,1509678945.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:46.323Z,1509678946.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:46.324Z,1509678946.324 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:46.324Z,1509678946.324 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2017-11-03T03:15:46.340Z,1509678946.340 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:15:46.342Z,1509678946.342 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:46.342Z,1509678946.342 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2017-11-03T03:15:46.343Z,1509678946.343 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:15:46.436Z,1509678946.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:15:46.437Z,1509678946.437 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:15:46.522Z,1509678946.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:46.608Z,1509678946.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:15:46.609Z,1509678946.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2017-11-03T03:15:46.609Z,1509678946.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:15:46.609Z,1509678946.609 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2017-11-03T03:15:49.595Z,1509678949.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:49.595Z,1509678949.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2017-11-03T03:15:49.595Z,1509678949.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:15:49.597Z,1509678949.597 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:15:49.598Z,1509678949.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:15:49.598Z,1509678949.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:15:49.599Z,1509678949.599 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:15:49.599Z,1509678949.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:15:49.599Z,1509678949.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:15:49.685Z,1509678949.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:15:49.864Z,1509678949.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:15:49.864Z,1509678949.864 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2017-11-03T03:15:50.153Z,1509678950.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:15:50.154Z,1509678950.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:15:50.154Z,1509678950.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:15:50.548Z,1509678950.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-03T03:15:50.549Z,1509678950.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:50.946Z,1509678950.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-03T03:15:50.947Z,1509678950.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:51.350Z,1509678951.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T03:15:51.351Z,1509678951.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:54.477Z,1509678954.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T03:15:54.478Z,1509678954.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:54.586Z,1509678954.586 [DataOverHttps](INFO): Sending 258 bytes from file Logs/20171103T001125/Express0073.lzma
2017-11-03T03:15:54.666Z,1509678954.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T03:15:54.667Z,1509678954.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:55.039Z,1509678955.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T03:15:55.040Z,1509678955.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:55.383Z,1509678955.383 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0073.lzma.bak
2017-11-03T03:15:55.383Z,1509678955.383 [DataOverHttps](INFO): SBD MOMSN=5182572
2017-11-03T03:15:55.479Z,1509678955.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T03:15:55.480Z,1509678955.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:56.250Z,1509678956.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-03T03:15:56.251Z,1509678956.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:15:56.255Z,1509678956.255 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T03:15:56.255Z,1509678956.255 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T03:15:56.255Z,1509678956.255 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T03:15:56.457Z,1509678956.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T03:15:56.458Z,1509678956.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:01.899Z,1509678961.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-03T03:16:01.900Z,1509678961.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:02.115Z,1509678962.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T03:16:02.125Z,1509678962.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:02.523Z,1509678962.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T03:16:02.524Z,1509678962.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:02.929Z,1509678962.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T03:16:02.930Z,1509678962.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:03.311Z,1509678963.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T03:16:03.321Z,1509678963.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:03.730Z,1509678963.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T03:16:03.731Z,1509678963.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:04.096Z,1509678964.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T03:16:04.121Z,1509678964.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:04.527Z,1509678964.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T03:16:04.528Z,1509678964.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:04.919Z,1509678964.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T03:16:04.920Z,1509678964.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:05.322Z,1509678965.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T03:16:05.323Z,1509678965.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:05.723Z,1509678965.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T03:16:05.724Z,1509678965.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:06.114Z,1509678966.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T03:16:06.115Z,1509678966.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:06.539Z,1509678966.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T03:16:06.540Z,1509678966.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:06.894Z,1509678966.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T03:16:06.895Z,1509678966.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:07.290Z,1509678967.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T03:16:07.291Z,1509678967.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:07.694Z,1509678967.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T03:16:07.695Z,1509678967.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:08.092Z,1509678968.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T03:16:08.093Z,1509678968.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:08.578Z,1509678968.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T03:16:08.579Z,1509678968.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:08.899Z,1509678968.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T03:16:08.900Z,1509678968.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:09.302Z,1509678969.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T03:16:09.303Z,1509678969.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:09.693Z,1509678969.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:10.091Z,1509678970.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:10.488Z,1509678970.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:10.891Z,1509678970.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:11.339Z,1509678971.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:11.703Z,1509678971.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:12.106Z,1509678972.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:12.494Z,1509678972.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:12.891Z,1509678972.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:13.291Z,1509678973.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:13.694Z,1509678973.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:14.089Z,1509678974.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:14.507Z,1509678974.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:14.931Z,1509678974.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:15.350Z,1509678975.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:15.732Z,1509678975.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:16.093Z,1509678976.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:16.491Z,1509678976.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:16.911Z,1509678976.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:17.299Z,1509678977.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:17.751Z,1509678977.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:18.099Z,1509678978.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:18.527Z,1509678978.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:18.930Z,1509678978.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:19.325Z,1509678979.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:19.695Z,1509678979.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:20.092Z,1509678980.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:20.499Z,1509678980.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:20.898Z,1509678980.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:21.307Z,1509678981.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:21.691Z,1509678981.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:22.086Z,1509678982.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:22.495Z,1509678982.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:22.888Z,1509678982.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:23.298Z,1509678983.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:23.702Z,1509678983.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:24.102Z,1509678984.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:24.487Z,1509678984.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:24.891Z,1509678984.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:25.291Z,1509678985.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:25.694Z,1509678985.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:26.093Z,1509678986.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:26.507Z,1509678986.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:26.900Z,1509678986.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:27.307Z,1509678987.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:27.691Z,1509678987.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:28.087Z,1509678988.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:28.491Z,1509678988.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:28.890Z,1509678988.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:29.339Z,1509678989.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:29.703Z,1509678989.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:30.107Z,1509678990.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:30.498Z,1509678990.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:30.891Z,1509678990.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:31.307Z,1509678991.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:31.694Z,1509678991.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:32.100Z,1509678992.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:32.542Z,1509678992.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:32.899Z,1509678992.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:33.339Z,1509678993.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:33.691Z,1509678993.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:34.103Z,1509678994.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:34.493Z,1509678994.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:34.895Z,1509678994.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:35.300Z,1509678995.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:35.703Z,1509678995.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:36.110Z,1509678996.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:36.494Z,1509678996.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:36.899Z,1509678996.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:37.300Z,1509678997.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:37.695Z,1509678997.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:38.099Z,1509678998.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:38.504Z,1509678998.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:38.947Z,1509678998.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:39.304Z,1509678999.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:39.700Z,1509678999.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:40.094Z,1509679000.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:40.495Z,1509679000.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:40.891Z,1509679000.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:41.299Z,1509679001.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:41.707Z,1509679001.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:42.103Z,1509679002.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:42.498Z,1509679002.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:42.899Z,1509679002.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:43.291Z,1509679003.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:43.695Z,1509679003.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:44.092Z,1509679004.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:44.504Z,1509679004.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:44.907Z,1509679004.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:45.304Z,1509679005.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:45.700Z,1509679005.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:46.094Z,1509679006.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:46.539Z,1509679006.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:46.899Z,1509679006.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:47.335Z,1509679007.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:47.707Z,1509679007.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:48.147Z,1509679008.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:48.536Z,1509679008.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:48.892Z,1509679008.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:49.296Z,1509679009.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:49.697Z,1509679009.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:50.103Z,1509679010.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:50.504Z,1509679010.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:50.901Z,1509679010.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:51.300Z,1509679011.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:51.695Z,1509679011.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:52.078Z,1509679012.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:52.500Z,1509679012.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:52.899Z,1509679012.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:53.305Z,1509679013.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:53.703Z,1509679013.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:54.111Z,1509679014.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:54.478Z,1509679014.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:54.903Z,1509679014.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:55.283Z,1509679015.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:55.705Z,1509679015.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:56.102Z,1509679016.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:56.505Z,1509679016.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:16:56.911Z,1509679016.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:00.013Z,1509679020.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:00.158Z,1509679020.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:00.636Z,1509679020.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:00.955Z,1509679020.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:01.405Z,1509679021.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:01.765Z,1509679021.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:02.205Z,1509679022.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:02.582Z,1509679022.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:02.967Z,1509679022.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:03.363Z,1509679023.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:03.741Z,1509679023.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:04.144Z,1509679024.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:04.566Z,1509679024.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:04.971Z,1509679024.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:05.369Z,1509679025.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:05.744Z,1509679025.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:06.144Z,1509679026.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:06.543Z,1509679026.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:06.944Z,1509679026.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:07.367Z,1509679027.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:07.769Z,1509679027.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:08.167Z,1509679028.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:08.547Z,1509679028.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:08.943Z,1509679028.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:09.367Z,1509679029.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:09.744Z,1509679029.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:10.143Z,1509679030.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:10.571Z,1509679030.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:10.970Z,1509679030.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:11.372Z,1509679031.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:11.747Z,1509679031.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:12.144Z,1509679032.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:12.543Z,1509679032.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:12.943Z,1509679032.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:13.371Z,1509679033.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:13.741Z,1509679033.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:13.774Z,1509679033.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:14.142Z,1509679034.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:14.173Z,1509679034.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:14.528Z,1509679034.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:14.599Z,1509679034.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:14.928Z,1509679034.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:14.942Z,1509679034.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:15.328Z,1509679035.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:15.383Z,1509679035.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:15.733Z,1509679035.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:15.748Z,1509679035.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:16.136Z,1509679036.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:16.178Z,1509679036.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:16.549Z,1509679036.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:16.595Z,1509679036.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:16.949Z,1509679036.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:16.978Z,1509679036.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:17.341Z,1509679037.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:17.378Z,1509679037.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:17.737Z,1509679037.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:17.751Z,1509679037.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:18.132Z,1509679038.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:18.147Z,1509679038.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:18.536Z,1509679038.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:18.551Z,1509679038.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:18.933Z,1509679038.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:18.948Z,1509679038.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:19.349Z,1509679039.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:19.378Z,1509679039.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:19.749Z,1509679039.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:19.779Z,1509679039.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:20.138Z,1509679040.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:20.153Z,1509679040.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:20.537Z,1509679040.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:20.552Z,1509679040.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:20.936Z,1509679040.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:20.951Z,1509679040.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:21.333Z,1509679041.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:21.349Z,1509679041.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:21.737Z,1509679041.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:21.752Z,1509679041.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:22.133Z,1509679042.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:22.148Z,1509679042.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:22.538Z,1509679042.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:22.553Z,1509679042.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:22.949Z,1509679042.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:22.981Z,1509679042.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:23.349Z,1509679043.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:23.364Z,1509679043.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:23.736Z,1509679043.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:23.751Z,1509679043.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:24.136Z,1509679044.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:24.151Z,1509679044.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:24.537Z,1509679044.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:24.552Z,1509679044.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:24.936Z,1509679044.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:24.951Z,1509679044.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:25.341Z,1509679045.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:25.357Z,1509679045.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:25.748Z,1509679045.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:25.782Z,1509679045.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:26.150Z,1509679046.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:26.181Z,1509679046.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:26.537Z,1509679046.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:26.552Z,1509679046.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:26.952Z,1509679046.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:27.359Z,1509679047.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:27.751Z,1509679047.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:28.154Z,1509679048.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:28.556Z,1509679048.556 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T03:17:28.556Z,1509679048.556 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:17:28.556Z,1509679048.556 [BPC1](ERROR): Data Fault
2017-11-03T03:17:28.565Z,1509679048.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:28.678Z,1509679048.678 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:17:28.961Z,1509679048.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:29.359Z,1509679049.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:29.753Z,1509679049.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:29.833Z,1509679049.833 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:17:29.833Z,1509679049.833 [BPC1] No Fault, FailCount= 1
2017-11-03T03:17:30.207Z,1509679050.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:30.555Z,1509679050.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:30.991Z,1509679050.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:31.359Z,1509679051.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:31.759Z,1509679051.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:32.160Z,1509679052.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:32.552Z,1509679052.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:32.955Z,1509679052.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:33.349Z,1509679053.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:33.754Z,1509679053.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:34.155Z,1509679054.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:34.557Z,1509679054.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:34.963Z,1509679054.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:35.363Z,1509679055.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:35.748Z,1509679055.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:36.150Z,1509679056.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:36.553Z,1509679056.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:36.953Z,1509679056.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:37.362Z,1509679057.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:37.770Z,1509679057.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:38.164Z,1509679058.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:38.551Z,1509679058.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:38.953Z,1509679058.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:39.352Z,1509679059.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:39.754Z,1509679059.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:40.154Z,1509679060.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:40.563Z,1509679060.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:40.966Z,1509679060.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:41.364Z,1509679061.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:41.756Z,1509679061.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:42.152Z,1509679062.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:42.575Z,1509679062.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:42.999Z,1509679062.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:43.364Z,1509679063.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:43.806Z,1509679063.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:44.171Z,1509679064.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:44.575Z,1509679064.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:44.931Z,1509679064.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:44.958Z,1509679064.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:45.325Z,1509679065.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:45.383Z,1509679065.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:45.725Z,1509679065.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:45.751Z,1509679065.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:46.129Z,1509679066.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:46.167Z,1509679066.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:46.546Z,1509679066.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:46.561Z,1509679066.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:46.953Z,1509679066.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:46.974Z,1509679066.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:47.350Z,1509679067.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:47.365Z,1509679067.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:47.729Z,1509679067.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:47.755Z,1509679067.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:48.125Z,1509679068.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:48.154Z,1509679068.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:48.245Z,1509679068.245 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:17:48.245Z,1509679068.245 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T03:17:48.425Z,1509679068.425 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:17:48.425Z,1509679068.425 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:17:48.425Z,1509679068.425 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:17:48.426Z,1509679068.426 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:17:48.529Z,1509679068.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:48.563Z,1509679068.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:48.926Z,1509679068.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:48.959Z,1509679068.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:49.349Z,1509679069.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:49.363Z,1509679069.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:49.750Z,1509679069.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:49.765Z,1509679069.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:50.146Z,1509679070.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:50.161Z,1509679070.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:50.529Z,1509679070.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:50.554Z,1509679070.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:50.960Z,1509679070.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:51.355Z,1509679071.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:51.739Z,1509679071.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:52.162Z,1509679072.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:52.588Z,1509679072.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:52.655Z,1509679072.655 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:17:52.731Z,1509679072.731 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:17:52.732Z,1509679072.732 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:17:52.733Z,1509679072.733 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:17:52.734Z,1509679072.734 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:17:52.972Z,1509679072.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:53.369Z,1509679073.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:53.760Z,1509679073.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:54.146Z,1509679074.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:54.533Z,1509679074.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:54.549Z,1509679074.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:54.929Z,1509679074.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:54.944Z,1509679074.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:55.345Z,1509679075.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:55.381Z,1509679075.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:55.745Z,1509679075.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:55.777Z,1509679075.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:56.150Z,1509679076.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:56.178Z,1509679076.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:56.536Z,1509679076.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:56.551Z,1509679076.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:17:56.938Z,1509679076.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:17:56.953Z,1509679076.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:00.269Z,1509679080.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:00.350Z,1509679080.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:00.494Z,1509679080.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:00.509Z,1509679080.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:00.905Z,1509679080.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:00.955Z,1509679080.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:01.305Z,1509679081.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:01.337Z,1509679081.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:01.697Z,1509679081.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:01.743Z,1509679081.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:02.090Z,1509679082.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:02.143Z,1509679082.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:02.493Z,1509679082.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:02.509Z,1509679082.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:02.891Z,1509679082.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:02.907Z,1509679082.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:03.304Z,1509679083.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:03.320Z,1509679083.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:03.704Z,1509679083.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:03.720Z,1509679083.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:04.104Z,1509679084.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:04.120Z,1509679084.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:04.495Z,1509679084.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:04.510Z,1509679084.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:04.877Z,1509679084.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:04.911Z,1509679084.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:05.283Z,1509679085.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:18:05.314Z,1509679085.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:05.714Z,1509679085.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:06.112Z,1509679086.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:06.521Z,1509679086.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:06.921Z,1509679086.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:07.326Z,1509679087.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:07.698Z,1509679087.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:08.129Z,1509679088.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:08.503Z,1509679088.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:08.905Z,1509679088.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:09.339Z,1509679089.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:09.731Z,1509679089.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:10.128Z,1509679090.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:10.507Z,1509679090.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:10.931Z,1509679090.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:11.327Z,1509679091.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:11.707Z,1509679091.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:12.103Z,1509679092.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:12.527Z,1509679092.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:12.927Z,1509679092.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:13.340Z,1509679093.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:13.706Z,1509679093.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:14.170Z,1509679094.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:14.499Z,1509679094.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:14.939Z,1509679094.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:15.334Z,1509679095.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:15.751Z,1509679095.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:16.151Z,1509679096.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:16.503Z,1509679096.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:16.903Z,1509679096.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:17.301Z,1509679097.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:17.711Z,1509679097.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:18.103Z,1509679098.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:18.507Z,1509679098.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:18.994Z,1509679098.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:19.312Z,1509679099.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:19.703Z,1509679099.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:20.111Z,1509679100.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:20.499Z,1509679100.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:20.897Z,1509679100.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:21.309Z,1509679101.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:21.736Z,1509679101.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:22.110Z,1509679102.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:22.507Z,1509679102.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:22.906Z,1509679102.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:23.319Z,1509679103.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:23.710Z,1509679103.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:24.110Z,1509679104.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:24.467Z,1509679104.467 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T03:18:24.467Z,1509679104.467 [NAL9602] Data Fault, FailCount= 2
2017-11-03T03:18:24.467Z,1509679104.467 [NAL9602](ERROR): Data Fault
2017-11-03T03:18:24.527Z,1509679104.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:24.621Z,1509679104.621 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T03:18:24.870Z,1509679104.870 [NAL9602](INFO): Powering down
2017-11-03T03:18:24.916Z,1509679104.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:25.306Z,1509679105.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:25.708Z,1509679105.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:25.797Z,1509679105.797 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T03:18:25.797Z,1509679105.797 [NAL9602] No Fault, FailCount= 2
2017-11-03T03:18:26.109Z,1509679106.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:26.506Z,1509679106.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:26.908Z,1509679106.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:27.325Z,1509679107.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:27.708Z,1509679107.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:28.189Z,1509679108.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:28.510Z,1509679108.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:28.903Z,1509679108.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:29.327Z,1509679109.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:29.717Z,1509679109.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:30.149Z,1509679110.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:30.502Z,1509679110.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:30.952Z,1509679110.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:31.303Z,1509679111.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:31.712Z,1509679111.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:32.116Z,1509679112.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:32.508Z,1509679112.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:32.907Z,1509679112.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:33.317Z,1509679113.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:33.702Z,1509679113.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:34.116Z,1509679114.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:34.517Z,1509679114.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:34.894Z,1509679114.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:35.310Z,1509679115.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:35.715Z,1509679115.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:36.103Z,1509679116.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:36.502Z,1509679116.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:36.915Z,1509679116.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:37.305Z,1509679117.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:37.707Z,1509679117.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:38.119Z,1509679118.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:38.508Z,1509679118.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:38.908Z,1509679118.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:39.317Z,1509679119.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:39.709Z,1509679119.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:40.108Z,1509679120.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:40.508Z,1509679120.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:40.908Z,1509679120.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:41.329Z,1509679121.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:41.709Z,1509679121.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:42.109Z,1509679122.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:42.527Z,1509679122.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:42.903Z,1509679122.903 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T03:18:42.903Z,1509679122.903 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:18:42.903Z,1509679122.903 [BPC1](ERROR): Data Fault
2017-11-03T03:18:42.912Z,1509679122.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:42.993Z,1509679122.993 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:18:43.310Z,1509679123.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:43.709Z,1509679123.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:44.107Z,1509679124.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:44.200Z,1509679124.200 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:18:44.201Z,1509679124.201 [BPC1] No Fault, FailCount= 1
2017-11-03T03:18:44.563Z,1509679124.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:44.908Z,1509679124.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:45.307Z,1509679125.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:45.734Z,1509679125.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:46.110Z,1509679126.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:46.511Z,1509679126.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:46.911Z,1509679126.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:47.302Z,1509679127.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:47.698Z,1509679127.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:48.125Z,1509679128.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:48.497Z,1509679128.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:48.897Z,1509679128.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:49.322Z,1509679129.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:49.697Z,1509679129.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:49.698Z,1509679129.698 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:49.698Z,1509679129.698 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2017-11-03T03:18:49.698Z,1509679129.698 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:18:49.700Z,1509679129.700 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:49.700Z,1509679129.700 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2017-11-03T03:18:49.701Z,1509679129.701 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:18:49.817Z,1509679129.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:18:49.817Z,1509679129.817 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:18:50.104Z,1509679130.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:50.220Z,1509679130.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:18:50.220Z,1509679130.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2017-11-03T03:18:50.221Z,1509679130.221 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:18:50.221Z,1509679130.221 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2017-11-03T03:18:50.499Z,1509679130.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:50.499Z,1509679130.499 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2017-11-03T03:18:50.499Z,1509679130.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:18:50.500Z,1509679130.500 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:18:50.500Z,1509679130.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:18:50.501Z,1509679130.501 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:18:50.501Z,1509679130.501 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:18:50.502Z,1509679130.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:18:50.502Z,1509679130.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:18:50.589Z,1509679130.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:18:50.991Z,1509679130.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:18:50.992Z,1509679130.992 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2017-11-03T03:18:51.303Z,1509679131.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:18:51.304Z,1509679131.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:18:51.304Z,1509679131.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:18:51.702Z,1509679131.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:52.102Z,1509679132.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:52.510Z,1509679132.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:52.918Z,1509679132.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:53.311Z,1509679133.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:53.707Z,1509679133.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:54.106Z,1509679134.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:54.508Z,1509679134.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:54.908Z,1509679134.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:55.266Z,1509679135.266 [NAL9602](INFO): Powering up NAL9602
2017-11-03T03:18:55.336Z,1509679135.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:55.714Z,1509679135.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:56.101Z,1509679136.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:56.510Z,1509679136.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:56.908Z,1509679136.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:18:57.383Z,1509679137.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:00.518Z,1509679140.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:00.698Z,1509679140.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:01.138Z,1509679141.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:01.495Z,1509679141.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:01.907Z,1509679141.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:02.311Z,1509679142.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:02.695Z,1509679142.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:03.101Z,1509679143.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:03.495Z,1509679143.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:03.900Z,1509679143.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:04.303Z,1509679144.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:04.702Z,1509679144.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:05.100Z,1509679145.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:05.500Z,1509679145.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:05.904Z,1509679145.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:06.254Z,1509679146.254 [NAL9602](INFO): NAL9602 initialized
2017-11-03T03:19:06.304Z,1509679146.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:06.699Z,1509679146.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:07.134Z,1509679147.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:07.508Z,1509679147.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:07.914Z,1509679147.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:08.283Z,1509679148.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:08.711Z,1509679148.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:09.088Z,1509679149.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:09.490Z,1509679149.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:09.909Z,1509679149.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:10.314Z,1509679150.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:10.715Z,1509679150.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:11.111Z,1509679151.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:11.520Z,1509679151.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:11.891Z,1509679151.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:12.291Z,1509679152.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:12.690Z,1509679152.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:13.118Z,1509679153.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:13.573Z,1509679153.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:13.896Z,1509679153.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:14.353Z,1509679154.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:14.686Z,1509679154.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:15.095Z,1509679155.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:15.530Z,1509679155.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:15.896Z,1509679155.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:16.319Z,1509679156.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:16.726Z,1509679156.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:17.101Z,1509679157.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:17.493Z,1509679157.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:17.896Z,1509679157.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:18.303Z,1509679158.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:18.696Z,1509679158.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:19.098Z,1509679159.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:19.499Z,1509679159.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:19.902Z,1509679159.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:20.300Z,1509679160.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:20.697Z,1509679160.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:21.142Z,1509679161.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:21.492Z,1509679161.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:21.907Z,1509679161.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:22.308Z,1509679162.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:22.703Z,1509679162.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:23.091Z,1509679163.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:23.500Z,1509679163.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:23.903Z,1509679163.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:24.307Z,1509679164.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:24.707Z,1509679164.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:25.099Z,1509679165.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:25.554Z,1509679165.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:25.892Z,1509679165.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:26.306Z,1509679166.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:26.692Z,1509679166.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:27.103Z,1509679167.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:27.590Z,1509679167.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:27.900Z,1509679167.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:28.292Z,1509679168.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:28.693Z,1509679168.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:29.173Z,1509679169.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:29.492Z,1509679169.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:29.939Z,1509679169.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:30.303Z,1509679170.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:30.735Z,1509679170.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:31.128Z,1509679171.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:31.499Z,1509679171.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:31.903Z,1509679171.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:32.300Z,1509679172.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:32.703Z,1509679172.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:33.091Z,1509679173.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:33.502Z,1509679173.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:33.911Z,1509679173.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:34.304Z,1509679174.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:34.697Z,1509679174.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:35.122Z,1509679175.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:35.495Z,1509679175.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:35.906Z,1509679175.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:36.311Z,1509679176.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:36.704Z,1509679176.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:37.102Z,1509679177.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:37.500Z,1509679177.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:37.898Z,1509679177.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:38.301Z,1509679178.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:38.686Z,1509679178.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:39.107Z,1509679179.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:39.565Z,1509679179.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:39.895Z,1509679179.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:40.291Z,1509679180.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:40.698Z,1509679180.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:41.094Z,1509679181.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:41.553Z,1509679181.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:41.899Z,1509679181.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:42.299Z,1509679182.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:42.703Z,1509679182.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:43.144Z,1509679183.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:43.545Z,1509679183.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:43.891Z,1509679183.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:44.292Z,1509679184.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:44.734Z,1509679184.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:45.107Z,1509679185.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:45.538Z,1509679185.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:45.935Z,1509679185.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:46.292Z,1509679186.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:46.691Z,1509679186.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:47.095Z,1509679187.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:47.491Z,1509679187.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:47.900Z,1509679187.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:48.300Z,1509679188.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:48.616Z,1509679188.616 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:19:48.616Z,1509679188.616 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T03:19:48.616Z,1509679188.616 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:19:48.721Z,1509679188.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:19:48.722Z,1509679188.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:48.825Z,1509679188.825 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:19:49.024Z,1509679189.024 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:19:49.208Z,1509679189.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T03:19:49.209Z,1509679189.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:49.280Z,1509679189.280 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:19:49.490Z,1509679189.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:19:49.491Z,1509679189.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:49.891Z,1509679189.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:19:49.892Z,1509679189.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:50.292Z,1509679190.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:19:50.293Z,1509679190.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:50.689Z,1509679190.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:19:50.690Z,1509679190.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:50.781Z,1509679190.781 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:19:50.781Z,1509679190.781 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T03:19:50.896Z,1509679190.896 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:19:50.897Z,1509679190.897 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:19:50.897Z,1509679190.897 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:19:50.897Z,1509679190.897 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:19:51.110Z,1509679191.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:19:51.111Z,1509679191.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:51.504Z,1509679191.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:19:51.505Z,1509679191.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:51.900Z,1509679191.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:19:51.901Z,1509679191.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:52.291Z,1509679192.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:19:52.292Z,1509679192.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:52.693Z,1509679192.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:19:52.694Z,1509679192.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:53.094Z,1509679193.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:19:53.095Z,1509679193.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:53.492Z,1509679193.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:19:53.493Z,1509679193.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:53.903Z,1509679193.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:19:53.904Z,1509679193.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:54.300Z,1509679194.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:19:54.301Z,1509679194.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:54.706Z,1509679194.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:19:54.707Z,1509679194.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:55.018Z,1509679195.018 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:19:55.128Z,1509679195.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:19:55.133Z,1509679195.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:55.187Z,1509679195.187 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:19:55.188Z,1509679195.188 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:19:55.189Z,1509679195.189 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:19:55.189Z,1509679195.189 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:19:55.497Z,1509679195.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:19:55.498Z,1509679195.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:55.903Z,1509679195.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:56.297Z,1509679196.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:56.703Z,1509679196.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:57.111Z,1509679197.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:19:57.514Z,1509679197.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:00.682Z,1509679200.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:00.855Z,1509679200.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:01.243Z,1509679201.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:01.679Z,1509679201.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:02.113Z,1509679202.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:02.493Z,1509679202.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:02.859Z,1509679202.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:03.271Z,1509679203.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:03.629Z,1509679203.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:04.052Z,1509679204.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:04.455Z,1509679204.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:04.846Z,1509679204.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x23803 got:0x17074
2017-11-03T03:20:04.871Z,1509679204.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:05.247Z,1509679205.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:05.652Z,1509679205.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:06.048Z,1509679206.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:06.428Z,1509679206.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:06.859Z,1509679206.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:07.259Z,1509679207.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:07.652Z,1509679207.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:08.031Z,1509679208.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:08.429Z,1509679208.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:08.851Z,1509679208.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:09.255Z,1509679209.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:09.652Z,1509679209.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:10.031Z,1509679210.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:10.450Z,1509679210.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:10.853Z,1509679210.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:11.251Z,1509679211.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:11.659Z,1509679211.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:12.030Z,1509679212.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:12.450Z,1509679212.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:12.833Z,1509679212.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T03:20:12.859Z,1509679212.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:13.259Z,1509679213.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:13.653Z,1509679213.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:14.054Z,1509679214.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:14.422Z,1509679214.422 [PNI_TCM](ERROR): CRC does not match. Expected:0x26751 got:0x49643
2017-11-03T03:20:14.455Z,1509679214.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:14.855Z,1509679214.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:15.367Z,1509679215.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:15.667Z,1509679215.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:16.066Z,1509679216.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:16.432Z,1509679216.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:16.829Z,1509679216.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:16.874Z,1509679216.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:17.235Z,1509679217.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:17.305Z,1509679217.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:17.647Z,1509679217.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:17.662Z,1509679217.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:18.022Z,1509679218.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:18.037Z,1509679218.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:18.416Z,1509679218.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:18.431Z,1509679218.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:18.828Z,1509679218.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:18.851Z,1509679218.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:19.224Z,1509679219.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:19.238Z,1509679219.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:19.638Z,1509679219.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:19.658Z,1509679219.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:20.019Z,1509679220.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:20.039Z,1509679220.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:20.415Z,1509679220.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:20.443Z,1509679220.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:20.824Z,1509679220.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:20.830Z,1509679220.830 [PNI_TCM](ERROR): CRC does not match. Expected:0x25853 got:0x51573
2017-11-03T03:20:20.870Z,1509679220.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:21.237Z,1509679221.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:21.260Z,1509679221.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:21.629Z,1509679221.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:21.664Z,1509679221.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:22.022Z,1509679222.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:22.039Z,1509679222.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:22.422Z,1509679222.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:22.443Z,1509679222.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:22.838Z,1509679222.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:22.862Z,1509679222.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:23.241Z,1509679223.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:23.271Z,1509679223.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:23.635Z,1509679223.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:23.662Z,1509679223.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:24.018Z,1509679224.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:24.033Z,1509679224.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:24.419Z,1509679224.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:24.435Z,1509679224.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:24.818Z,1509679224.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:24.833Z,1509679224.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:25.262Z,1509679225.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:25.662Z,1509679225.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:26.064Z,1509679226.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:26.432Z,1509679226.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:26.858Z,1509679226.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:27.229Z,1509679227.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x60917 got:0x21
2017-11-03T03:20:27.266Z,1509679227.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:27.634Z,1509679227.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:28.061Z,1509679228.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:28.464Z,1509679228.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:28.885Z,1509679228.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:29.309Z,1509679229.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:29.682Z,1509679229.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:30.036Z,1509679230.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:30.444Z,1509679230.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:30.878Z,1509679230.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:31.247Z,1509679231.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:31.691Z,1509679231.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:32.087Z,1509679232.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:32.442Z,1509679232.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:32.843Z,1509679232.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:33.240Z,1509679233.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:33.639Z,1509679233.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:34.055Z,1509679234.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:34.446Z,1509679234.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:34.874Z,1509679234.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:35.234Z,1509679235.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:35.636Z,1509679235.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:36.038Z,1509679236.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:36.437Z,1509679236.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:36.850Z,1509679236.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:37.247Z,1509679237.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:37.650Z,1509679237.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:38.040Z,1509679238.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:38.442Z,1509679238.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:38.845Z,1509679238.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:39.252Z,1509679239.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:39.650Z,1509679239.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:40.047Z,1509679240.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:40.437Z,1509679240.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:40.847Z,1509679240.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:41.273Z,1509679241.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:41.651Z,1509679241.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:42.041Z,1509679242.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:42.440Z,1509679242.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:42.854Z,1509679242.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:43.325Z,1509679243.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:43.659Z,1509679243.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:44.048Z,1509679244.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:44.506Z,1509679244.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:44.841Z,1509679244.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:45.278Z,1509679245.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:45.610Z,1509679245.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:45.647Z,1509679245.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:46.036Z,1509679246.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:46.090Z,1509679246.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:46.436Z,1509679246.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:20:46.490Z,1509679246.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:46.880Z,1509679246.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:47.243Z,1509679247.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:47.640Z,1509679247.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:48.051Z,1509679248.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:48.441Z,1509679248.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:48.836Z,1509679248.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:49.254Z,1509679249.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:49.651Z,1509679249.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:50.047Z,1509679250.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:50.438Z,1509679250.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:50.855Z,1509679250.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:51.238Z,1509679251.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:51.640Z,1509679251.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:52.067Z,1509679252.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:52.461Z,1509679252.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:52.874Z,1509679252.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:53.264Z,1509679253.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:53.661Z,1509679253.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:54.063Z,1509679254.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:54.423Z,1509679254.423 [PNI_TCM](ERROR): CRC does not match. Expected:0x64879 got:0x39369
2017-11-03T03:20:54.467Z,1509679254.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:54.867Z,1509679254.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:55.263Z,1509679255.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:55.675Z,1509679255.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:56.076Z,1509679256.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:56.467Z,1509679256.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:56.470Z,1509679256.470 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T03:20:56.470Z,1509679256.470 [Default:CheckIn:C.Wait] Stopped
2017-11-03T03:20:56.470Z,1509679256.470 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T03:20:56.470Z,1509679256.470 [Default:CheckIn:D] Running Loop=1
2017-11-03T03:20:56.877Z,1509679256.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:56.889Z,1509679256.889 [Default:CheckIn:D] Stopped
2017-11-03T03:20:56.889Z,1509679256.889 [Default:CheckIn:E] Running Loop=1
2017-11-03T03:20:57.295Z,1509679257.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:57.331Z,1509679257.331 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.822038 min 
2017-11-03T03:20:57.331Z,1509679257.331 [Default:CheckIn:E] Stopped
2017-11-03T03:20:57.331Z,1509679257.331 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T03:20:57.331Z,1509679257.331 [Default:CheckIn] Stopped
2017-11-03T03:20:57.331Z,1509679257.331 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T03:20:57.331Z,1509679257.331 [Default:CheckIn](INFO): Running loop #19
2017-11-03T03:20:57.331Z,1509679257.331 [Default:CheckIn] Running Loop=19
2017-11-03T03:20:57.332Z,1509679257.332 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T03:20:57.332Z,1509679257.332 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T03:20:57.644Z,1509679257.644 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T03:20:57.644Z,1509679257.644 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:20:57.644Z,1509679257.644 [BPC1](ERROR): Data Fault
2017-11-03T03:20:57.699Z,1509679257.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:20:57.801Z,1509679257.801 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:21:04.143Z,1509679264.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:04.318Z,1509679264.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:04.699Z,1509679264.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:04.809Z,1509679264.809 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:21:04.809Z,1509679264.809 [BPC1] No Fault, FailCount= 1
2017-11-03T03:21:05.171Z,1509679265.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:05.496Z,1509679265.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:05.911Z,1509679265.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:06.289Z,1509679266.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:06.682Z,1509679266.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:07.100Z,1509679267.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:07.497Z,1509679267.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:07.927Z,1509679267.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:08.284Z,1509679268.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:08.687Z,1509679268.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:09.130Z,1509679269.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:09.491Z,1509679269.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:09.893Z,1509679269.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:10.295Z,1509679270.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:10.688Z,1509679270.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:11.078Z,1509679271.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:11.475Z,1509679271.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:11.884Z,1509679271.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:12.284Z,1509679272.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:12.687Z,1509679272.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:13.079Z,1509679273.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:13.476Z,1509679273.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:13.894Z,1509679273.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:14.293Z,1509679274.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:14.727Z,1509679274.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:15.076Z,1509679275.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:15.482Z,1509679275.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:15.889Z,1509679275.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:16.295Z,1509679276.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:16.694Z,1509679276.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:17.076Z,1509679277.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:17.483Z,1509679277.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:17.927Z,1509679277.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:18.323Z,1509679278.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:18.699Z,1509679278.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:19.174Z,1509679279.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:19.483Z,1509679279.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:19.922Z,1509679279.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:20.334Z,1509679280.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:20.691Z,1509679280.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:21.083Z,1509679281.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:21.487Z,1509679281.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:21.895Z,1509679281.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:22.296Z,1509679282.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:22.696Z,1509679282.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:23.141Z,1509679283.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:23.487Z,1509679283.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:23.902Z,1509679283.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:24.296Z,1509679284.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:24.691Z,1509679284.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:25.088Z,1509679285.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:25.487Z,1509679285.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:25.896Z,1509679285.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:26.291Z,1509679286.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:26.696Z,1509679286.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:27.087Z,1509679287.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:27.546Z,1509679287.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:27.896Z,1509679287.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:28.299Z,1509679288.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:28.697Z,1509679288.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:29.107Z,1509679289.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:29.530Z,1509679289.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:29.904Z,1509679289.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:30.311Z,1509679290.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:30.700Z,1509679290.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:31.103Z,1509679291.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:31.479Z,1509679291.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:31.900Z,1509679291.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:32.323Z,1509679292.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:32.707Z,1509679292.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:33.105Z,1509679293.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:33.480Z,1509679293.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:33.905Z,1509679293.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:34.306Z,1509679294.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:34.709Z,1509679294.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:35.104Z,1509679295.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:35.472Z,1509679295.472 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:21:35.473Z,1509679295.473 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:21:35.473Z,1509679295.473 [BPC1](ERROR): Communications Fault
2017-11-03T03:21:35.481Z,1509679295.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:35.581Z,1509679295.581 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:21:35.911Z,1509679295.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:36.291Z,1509679296.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:36.709Z,1509679296.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:36.800Z,1509679296.800 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:21:36.800Z,1509679296.800 [BPC1] No Fault, FailCount= 1
2017-11-03T03:21:37.202Z,1509679297.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:37.479Z,1509679297.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:37.909Z,1509679297.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:38.312Z,1509679298.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:38.709Z,1509679298.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:39.079Z,1509679299.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:39.483Z,1509679299.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:39.911Z,1509679299.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:40.308Z,1509679300.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:40.713Z,1509679300.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:41.083Z,1509679301.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:41.562Z,1509679301.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:41.909Z,1509679301.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:42.291Z,1509679302.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:42.710Z,1509679302.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:43.083Z,1509679303.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:43.480Z,1509679303.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:43.884Z,1509679303.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:43.973Z,1509679303.973 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T03:21:44.291Z,1509679304.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:44.681Z,1509679304.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:45.093Z,1509679305.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:45.490Z,1509679305.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:45.899Z,1509679305.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:46.291Z,1509679306.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:46.686Z,1509679306.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:47.088Z,1509679307.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:47.482Z,1509679307.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:47.895Z,1509679307.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:48.288Z,1509679308.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:48.695Z,1509679308.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:49.091Z,1509679309.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:49.486Z,1509679309.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:49.889Z,1509679309.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:50.288Z,1509679310.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:50.689Z,1509679310.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:50.690Z,1509679310.690 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:50.690Z,1509679310.690 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2017-11-03T03:21:50.690Z,1509679310.690 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:21:50.692Z,1509679310.692 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:50.693Z,1509679310.693 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2017-11-03T03:21:50.693Z,1509679310.693 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:21:50.797Z,1509679310.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:21:50.797Z,1509679310.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:21:51.122Z,1509679311.122 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:21:51.122Z,1509679311.122 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T03:21:51.122Z,1509679311.122 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:21:51.133Z,1509679311.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:21:51.134Z,1509679311.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:51.220Z,1509679311.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:21:51.221Z,1509679311.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2017-11-03T03:21:51.221Z,1509679311.221 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:21:51.221Z,1509679311.221 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2017-11-03T03:21:51.222Z,1509679311.222 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:21:51.486Z,1509679311.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:21:51.487Z,1509679311.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:51.487Z,1509679311.487 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2017-11-03T03:21:51.487Z,1509679311.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:21:51.488Z,1509679311.488 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:21:51.489Z,1509679311.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:21:51.489Z,1509679311.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:21:51.489Z,1509679311.489 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:21:51.490Z,1509679311.490 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:21:51.490Z,1509679311.490 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:21:51.524Z,1509679311.524 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:21:51.585Z,1509679311.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:21:51.692Z,1509679311.692 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:21:51.997Z,1509679311.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:21:51.997Z,1509679311.997 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2017-11-03T03:21:52.299Z,1509679312.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:21:52.300Z,1509679312.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:21:52.300Z,1509679312.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:21:52.719Z,1509679312.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:21:52.720Z,1509679312.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:53.079Z,1509679313.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:21:53.081Z,1509679313.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:53.185Z,1509679313.185 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:21:53.185Z,1509679313.185 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T03:21:53.308Z,1509679313.308 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:21:53.309Z,1509679313.309 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:21:53.309Z,1509679313.309 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:21:53.309Z,1509679313.309 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:21:53.522Z,1509679313.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:21:53.523Z,1509679313.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:53.907Z,1509679313.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:21:53.908Z,1509679313.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:54.310Z,1509679314.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:21:54.311Z,1509679314.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:54.734Z,1509679314.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:21:54.735Z,1509679314.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:55.077Z,1509679315.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:21:55.078Z,1509679315.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:55.478Z,1509679315.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:21:55.479Z,1509679315.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:55.878Z,1509679315.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:21:55.879Z,1509679315.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:56.281Z,1509679316.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:21:56.282Z,1509679316.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:56.678Z,1509679316.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:21:56.679Z,1509679316.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:57.106Z,1509679317.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:21:57.107Z,1509679317.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:57.426Z,1509679317.426 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:21:57.508Z,1509679317.508 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:21:57.509Z,1509679317.509 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:21:57.510Z,1509679317.510 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:21:57.511Z,1509679317.511 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:21:57.574Z,1509679317.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T03:21:57.575Z,1509679317.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:21:57.920Z,1509679317.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:01.067Z,1509679321.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:01.232Z,1509679321.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:01.632Z,1509679321.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:02.037Z,1509679322.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:02.435Z,1509679322.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:02.830Z,1509679322.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:03.194Z,1509679323.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:03.225Z,1509679323.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:03.591Z,1509679323.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:03.623Z,1509679323.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:04.024Z,1509679324.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:04.060Z,1509679324.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:04.405Z,1509679324.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:04.457Z,1509679324.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:04.816Z,1509679324.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:04.847Z,1509679324.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:05.200Z,1509679325.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:05.267Z,1509679325.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:05.602Z,1509679325.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:05.618Z,1509679325.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:05.998Z,1509679325.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:06.032Z,1509679326.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:06.399Z,1509679326.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:06.470Z,1509679326.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:06.803Z,1509679326.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:06.820Z,1509679326.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:07.211Z,1509679327.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:07.262Z,1509679327.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:07.607Z,1509679327.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:07.650Z,1509679327.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:08.010Z,1509679328.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:08.058Z,1509679328.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:08.402Z,1509679328.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:08.462Z,1509679328.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:08.807Z,1509679328.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:08.827Z,1509679328.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:09.199Z,1509679329.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:09.232Z,1509679329.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:09.600Z,1509679329.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:09.620Z,1509679329.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:10.010Z,1509679330.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:10.031Z,1509679330.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:10.411Z,1509679330.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:10.426Z,1509679330.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:10.808Z,1509679330.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:10.848Z,1509679330.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:11.212Z,1509679331.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:11.229Z,1509679331.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:11.605Z,1509679331.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:11.621Z,1509679331.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:11.998Z,1509679331.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:12.021Z,1509679332.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:12.395Z,1509679332.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:12.438Z,1509679332.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:12.793Z,1509679332.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:12.831Z,1509679332.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:13.213Z,1509679333.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:13.228Z,1509679333.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:13.615Z,1509679333.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:13.630Z,1509679333.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:14.013Z,1509679334.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:14.055Z,1509679334.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:14.389Z,1509679334.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:14.420Z,1509679334.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:14.792Z,1509679334.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:14.830Z,1509679334.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:15.216Z,1509679335.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:15.231Z,1509679335.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:15.595Z,1509679335.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:15.639Z,1509679335.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:16.016Z,1509679336.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:16.039Z,1509679336.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:16.422Z,1509679336.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:16.437Z,1509679336.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:16.815Z,1509679336.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:16.835Z,1509679336.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:17.210Z,1509679337.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:17.273Z,1509679337.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:17.591Z,1509679337.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:17.634Z,1509679337.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:17.995Z,1509679337.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:18.025Z,1509679338.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:18.396Z,1509679338.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:18.425Z,1509679338.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:18.793Z,1509679338.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:18.830Z,1509679338.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:19.218Z,1509679339.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:19.284Z,1509679339.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:19.619Z,1509679339.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:19.635Z,1509679339.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:20.015Z,1509679340.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:20.035Z,1509679340.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:20.389Z,1509679340.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:20.455Z,1509679340.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:20.800Z,1509679340.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:20.829Z,1509679340.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:21.196Z,1509679341.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:21.228Z,1509679341.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:21.604Z,1509679341.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:21.617Z,1509679341.617 [PNI_TCM](ERROR): CRC does not match. Expected:0x10969 got:0x49152
2017-11-03T03:22:21.673Z,1509679341.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:22.012Z,1509679342.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:22.046Z,1509679342.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:22.415Z,1509679342.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:22.427Z,1509679342.427 [PNI_TCM](ERROR): CRC does not match. Expected:0x46444 got:0x60185
2017-11-03T03:22:22.479Z,1509679342.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:22.808Z,1509679342.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:22.874Z,1509679342.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:23.206Z,1509679343.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:23.229Z,1509679343.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:23.592Z,1509679343.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:23.632Z,1509679343.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:23.999Z,1509679343.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:24.031Z,1509679344.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:24.400Z,1509679344.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:24.423Z,1509679344.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:24.795Z,1509679344.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:24.827Z,1509679344.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:25.202Z,1509679345.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:25.242Z,1509679345.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:25.605Z,1509679345.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:25.635Z,1509679345.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:26.031Z,1509679346.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:26.408Z,1509679346.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:26.843Z,1509679346.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:27.196Z,1509679347.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:27.239Z,1509679347.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:27.589Z,1509679347.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:27.610Z,1509679347.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:28.020Z,1509679348.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:28.043Z,1509679348.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:28.405Z,1509679348.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:28.437Z,1509679348.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:28.812Z,1509679348.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:28.838Z,1509679348.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:29.199Z,1509679349.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:29.225Z,1509679349.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:29.602Z,1509679349.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:29.633Z,1509679349.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:29.993Z,1509679349.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:30.039Z,1509679350.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:30.397Z,1509679350.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:30.437Z,1509679350.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:30.797Z,1509679350.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:30.817Z,1509679350.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:31.238Z,1509679351.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:31.272Z,1509679351.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:31.612Z,1509679351.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:31.655Z,1509679351.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:32.015Z,1509679352.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:32.023Z,1509679352.023 [PNI_TCM](ERROR): CRC does not match. Expected:0x41661 got:0x39369
2017-11-03T03:22:32.070Z,1509679352.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:32.405Z,1509679352.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:32.427Z,1509679352.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:32.799Z,1509679352.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:32.822Z,1509679352.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:33.198Z,1509679353.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:33.235Z,1509679353.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:33.598Z,1509679353.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:33.655Z,1509679353.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:34.018Z,1509679354.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:34.033Z,1509679354.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:34.419Z,1509679354.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:34.433Z,1509679354.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:34.814Z,1509679354.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:34.882Z,1509679354.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:35.201Z,1509679355.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:35.238Z,1509679355.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:35.588Z,1509679355.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:35.618Z,1509679355.618 [PNI_TCM](ERROR): CRC does not match. Expected:0x8413 got:0x41755
2017-11-03T03:22:35.653Z,1509679355.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:36.007Z,1509679356.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:36.066Z,1509679356.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:36.402Z,1509679356.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:36.435Z,1509679356.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:36.805Z,1509679356.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:36.854Z,1509679356.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:37.209Z,1509679357.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:37.263Z,1509679357.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:37.617Z,1509679357.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:22:37.632Z,1509679357.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:38.039Z,1509679358.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:38.422Z,1509679358.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:38.812Z,1509679358.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:39.213Z,1509679359.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:39.632Z,1509679359.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:40.031Z,1509679360.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:40.436Z,1509679360.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:40.835Z,1509679360.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:41.228Z,1509679361.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:41.621Z,1509679361.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:42.021Z,1509679362.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:42.428Z,1509679362.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:42.813Z,1509679362.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:43.228Z,1509679363.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:43.632Z,1509679363.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:44.034Z,1509679364.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:44.435Z,1509679364.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:44.821Z,1509679364.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:45.274Z,1509679365.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:45.624Z,1509679365.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:46.050Z,1509679366.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:46.429Z,1509679366.429 [PNI_TCM](ERROR): CRC does not match. Expected:0x3922 got:0x49596
2017-11-03T03:22:46.454Z,1509679366.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:46.831Z,1509679366.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:47.222Z,1509679367.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:47.632Z,1509679367.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:48.035Z,1509679368.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:48.412Z,1509679368.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:48.811Z,1509679368.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:49.259Z,1509679369.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:49.635Z,1509679369.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:50.078Z,1509679370.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:50.410Z,1509679370.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:50.858Z,1509679370.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:51.243Z,1509679371.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:51.611Z,1509679371.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:52.029Z,1509679372.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:52.439Z,1509679372.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:52.832Z,1509679372.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:53.234Z,1509679373.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:53.602Z,1509679373.602 [PNI_TCM](ERROR): CRC does not match. Expected:0x50919 got:0x32768
2017-11-03T03:22:53.642Z,1509679373.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:54.034Z,1509679374.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:54.408Z,1509679374.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:54.811Z,1509679374.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:55.230Z,1509679375.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:55.639Z,1509679375.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:56.038Z,1509679376.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:56.430Z,1509679376.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:56.802Z,1509679376.802 [PNI_TCM](ERROR): CRC does not match. Expected:0x2778 got:0x6210
2017-11-03T03:22:56.834Z,1509679376.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:57.250Z,1509679377.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:57.635Z,1509679377.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:22:58.030Z,1509679378.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:01.230Z,1509679381.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:01.430Z,1509679381.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:01.794Z,1509679381.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:02.248Z,1509679382.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:02.603Z,1509679382.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:03.007Z,1509679383.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:03.439Z,1509679383.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:03.804Z,1509679383.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:04.238Z,1509679384.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:04.592Z,1509679384.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:05.091Z,1509679385.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:05.437Z,1509679385.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:05.814Z,1509679385.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:06.207Z,1509679386.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:06.618Z,1509679386.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:07.068Z,1509679387.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:07.396Z,1509679387.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:07.807Z,1509679387.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:08.203Z,1509679388.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:08.607Z,1509679388.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:09.067Z,1509679389.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:09.397Z,1509679389.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:09.808Z,1509679389.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:10.207Z,1509679390.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:10.601Z,1509679390.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:10.997Z,1509679390.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:11.404Z,1509679391.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:11.809Z,1509679391.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:12.215Z,1509679392.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:12.615Z,1509679392.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:13.014Z,1509679393.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:13.410Z,1509679393.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:13.805Z,1509679393.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:14.188Z,1509679394.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:14.587Z,1509679394.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:15.011Z,1509679395.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:15.406Z,1509679395.406 [BPC1](ERROR): Failed to parse message.
2017-11-03T03:23:15.406Z,1509679395.406 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T03:23:15.406Z,1509679395.406 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:23:15.406Z,1509679395.406 [BPC1](ERROR): Data Fault
2017-11-03T03:23:15.414Z,1509679395.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:15.504Z,1509679395.504 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:23:15.804Z,1509679395.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:16.199Z,1509679396.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:16.603Z,1509679396.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:16.685Z,1509679396.685 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:23:16.685Z,1509679396.685 [BPC1] No Fault, FailCount= 1
2017-11-03T03:23:17.051Z,1509679397.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:17.395Z,1509679397.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:17.801Z,1509679397.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:18.208Z,1509679398.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:18.643Z,1509679398.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:19.067Z,1509679399.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:19.396Z,1509679399.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:19.799Z,1509679399.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:20.207Z,1509679400.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:20.596Z,1509679400.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:21.066Z,1509679401.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:21.410Z,1509679401.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:21.808Z,1509679401.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:22.196Z,1509679402.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:22.599Z,1509679402.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:23.046Z,1509679403.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:23.407Z,1509679403.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:23.805Z,1509679403.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:24.219Z,1509679404.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:24.615Z,1509679404.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:25.077Z,1509679405.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:25.405Z,1509679405.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:25.808Z,1509679405.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:26.183Z,1509679406.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:26.587Z,1509679406.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:27.015Z,1509679407.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:27.411Z,1509679407.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:27.815Z,1509679407.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:28.187Z,1509679408.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:28.587Z,1509679408.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:29.005Z,1509679409.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:29.423Z,1509679409.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:29.814Z,1509679409.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:30.211Z,1509679410.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:30.635Z,1509679410.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:31.012Z,1509679411.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:31.388Z,1509679411.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:31.827Z,1509679411.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:32.213Z,1509679412.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:32.627Z,1509679412.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:33.072Z,1509679413.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:33.410Z,1509679413.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:33.819Z,1509679413.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:34.191Z,1509679414.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:34.614Z,1509679414.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:35.067Z,1509679415.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:35.391Z,1509679415.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:35.795Z,1509679415.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:36.200Z,1509679416.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:36.619Z,1509679416.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:37.075Z,1509679417.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:37.390Z,1509679417.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:37.792Z,1509679417.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:38.190Z,1509679418.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:38.595Z,1509679418.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:39.048Z,1509679419.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:39.400Z,1509679419.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:39.825Z,1509679419.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:40.199Z,1509679420.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:40.598Z,1509679420.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:40.999Z,1509679420.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:41.399Z,1509679421.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:41.796Z,1509679421.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:42.221Z,1509679422.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:42.604Z,1509679422.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:43.001Z,1509679423.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:43.391Z,1509679423.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:43.839Z,1509679423.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:44.197Z,1509679424.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:44.595Z,1509679424.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:45.046Z,1509679425.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:45.403Z,1509679425.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:45.804Z,1509679425.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:46.234Z,1509679426.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:46.598Z,1509679426.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:47.060Z,1509679427.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:47.434Z,1509679427.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:47.795Z,1509679427.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:48.207Z,1509679428.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:48.607Z,1509679428.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:49.058Z,1509679429.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:49.403Z,1509679429.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:49.795Z,1509679429.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:50.197Z,1509679430.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:50.603Z,1509679430.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:51.085Z,1509679431.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:51.407Z,1509679431.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:51.807Z,1509679431.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:52.194Z,1509679432.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:52.611Z,1509679432.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:52.992Z,1509679432.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:53.406Z,1509679433.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:53.807Z,1509679433.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:53.904Z,1509679433.904 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:23:53.904Z,1509679433.904 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T03:23:53.904Z,1509679433.904 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:23:54.217Z,1509679434.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:23:54.218Z,1509679434.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:54.310Z,1509679434.310 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:23:54.346Z,1509679434.346 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:23:54.435Z,1509679434.435 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:23:54.608Z,1509679434.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:23:54.609Z,1509679434.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:55.007Z,1509679435.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:23:55.008Z,1509679435.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:55.396Z,1509679435.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:23:55.397Z,1509679435.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:55.796Z,1509679435.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:23:55.797Z,1509679435.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:55.885Z,1509679435.885 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:23:55.885Z,1509679435.885 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T03:23:56.048Z,1509679436.048 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:23:56.049Z,1509679436.049 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:23:56.049Z,1509679436.049 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:23:56.049Z,1509679436.049 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:23:56.202Z,1509679436.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:23:56.203Z,1509679436.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:56.602Z,1509679436.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:23:56.603Z,1509679436.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:57.008Z,1509679437.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:23:57.009Z,1509679437.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:57.403Z,1509679437.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:23:57.404Z,1509679437.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:57.808Z,1509679437.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:23:57.809Z,1509679437.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:23:58.249Z,1509679438.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:23:58.250Z,1509679438.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:00.221Z,1509679440.221 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:24:00.303Z,1509679440.303 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:24:00.304Z,1509679440.304 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:24:00.305Z,1509679440.305 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:24:00.306Z,1509679440.306 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:24:01.617Z,1509679441.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:01.800Z,1509679441.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:02.201Z,1509679442.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:02.637Z,1509679442.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:03.001Z,1509679443.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:03.414Z,1509679443.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:03.808Z,1509679443.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:04.198Z,1509679444.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:04.591Z,1509679444.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:05.004Z,1509679445.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:05.407Z,1509679445.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:05.813Z,1509679445.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:06.203Z,1509679446.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:06.600Z,1509679446.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:07.012Z,1509679447.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:07.415Z,1509679447.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:07.779Z,1509679447.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:08.201Z,1509679448.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:08.601Z,1509679448.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:09.007Z,1509679449.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:09.423Z,1509679449.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:09.806Z,1509679449.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:10.198Z,1509679450.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:10.605Z,1509679450.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:11.001Z,1509679451.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:11.407Z,1509679451.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:11.802Z,1509679451.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:12.204Z,1509679452.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:12.605Z,1509679452.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:13.005Z,1509679453.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:13.378Z,1509679453.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:13.778Z,1509679453.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:14.215Z,1509679454.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:14.635Z,1509679454.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:15.009Z,1509679455.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:15.387Z,1509679455.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:15.786Z,1509679455.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:16.218Z,1509679456.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:16.586Z,1509679456.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:17.023Z,1509679457.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:17.423Z,1509679457.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:17.793Z,1509679457.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:18.190Z,1509679458.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:18.591Z,1509679458.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:18.985Z,1509679458.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:19.386Z,1509679459.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:19.787Z,1509679459.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:20.273Z,1509679460.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:20.592Z,1509679460.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:20.988Z,1509679460.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:21.386Z,1509679461.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:21.782Z,1509679461.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:22.187Z,1509679462.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:22.621Z,1509679462.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:22.999Z,1509679462.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:23.396Z,1509679463.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:23.793Z,1509679463.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:24.193Z,1509679464.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:24.615Z,1509679464.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:24.987Z,1509679464.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:25.388Z,1509679465.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:25.789Z,1509679465.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:26.221Z,1509679466.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:26.592Z,1509679466.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:26.992Z,1509679466.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:27.389Z,1509679467.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:27.789Z,1509679467.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:28.235Z,1509679468.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:28.591Z,1509679468.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:28.995Z,1509679468.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:29.447Z,1509679469.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:29.798Z,1509679469.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:30.226Z,1509679470.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:30.595Z,1509679470.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:31.026Z,1509679471.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:31.422Z,1509679471.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:31.795Z,1509679471.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:32.195Z,1509679472.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:32.596Z,1509679472.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:32.999Z,1509679472.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:33.387Z,1509679473.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:33.789Z,1509679473.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:34.187Z,1509679474.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:34.588Z,1509679474.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:34.000Z,1509679475.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:35.395Z,1509679475.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:35.800Z,1509679475.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:36.195Z,1509679476.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:36.609Z,1509679476.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:36.992Z,1509679476.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:37.395Z,1509679477.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:37.794Z,1509679477.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:38.200Z,1509679478.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:38.614Z,1509679478.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:39.007Z,1509679479.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:39.395Z,1509679479.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:39.798Z,1509679479.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:40.189Z,1509679480.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:40.592Z,1509679480.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:41.003Z,1509679481.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:41.411Z,1509679481.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:41.837Z,1509679481.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:42.239Z,1509679482.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:42.593Z,1509679482.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:42.994Z,1509679482.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:43.387Z,1509679483.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:43.818Z,1509679483.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:44.208Z,1509679484.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:44.646Z,1509679484.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:44.999Z,1509679484.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:45.411Z,1509679485.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:45.803Z,1509679485.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:46.192Z,1509679486.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:46.593Z,1509679486.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:47.002Z,1509679487.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:47.404Z,1509679487.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:47.801Z,1509679487.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:48.187Z,1509679488.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:48.583Z,1509679488.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:48.990Z,1509679488.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:49.391Z,1509679489.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:49.786Z,1509679489.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:50.195Z,1509679490.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:50.620Z,1509679490.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:51.003Z,1509679491.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:51.387Z,1509679491.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:51.791Z,1509679491.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:51.793Z,1509679491.793 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:51.793Z,1509679491.793 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2017-11-03T03:24:51.793Z,1509679491.793 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:24:51.795Z,1509679491.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:51.795Z,1509679491.795 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2017-11-03T03:24:51.795Z,1509679491.795 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:24:51.900Z,1509679491.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:24:51.901Z,1509679491.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:24:52.191Z,1509679492.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:52.284Z,1509679492.284 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:24:52.284Z,1509679492.284 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2017-11-03T03:24:52.285Z,1509679492.285 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:24:52.285Z,1509679492.285 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2017-11-03T03:24:52.605Z,1509679492.605 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:52.606Z,1509679492.606 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2017-11-03T03:24:52.606Z,1509679492.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:24:52.607Z,1509679492.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:24:52.607Z,1509679492.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:24:52.607Z,1509679492.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:24:52.608Z,1509679492.608 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:24:52.608Z,1509679492.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:24:52.625Z,1509679492.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:24:52.720Z,1509679492.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:24:53.077Z,1509679493.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:24:53.077Z,1509679493.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2017-11-03T03:24:53.395Z,1509679493.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:24:53.395Z,1509679493.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:24:53.395Z,1509679493.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:24:53.830Z,1509679493.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:54.190Z,1509679494.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:54.588Z,1509679494.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:54.995Z,1509679494.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:55.389Z,1509679495.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:55.789Z,1509679495.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:56.203Z,1509679496.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:56.648Z,1509679496.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:56.999Z,1509679496.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:57.388Z,1509679497.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:57.807Z,1509679497.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:58.187Z,1509679498.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:24:58.590Z,1509679498.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:01.831Z,1509679501.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:02.033Z,1509679502.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:02.429Z,1509679502.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:02.824Z,1509679502.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:03.196Z,1509679503.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:03.592Z,1509679503.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:03.998Z,1509679503.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:04.405Z,1509679504.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:04.803Z,1509679504.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:05.199Z,1509679505.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:05.575Z,1509679505.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:06.001Z,1509679506.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:06.375Z,1509679506.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:06.785Z,1509679506.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:07.188Z,1509679507.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:07.587Z,1509679507.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:08.047Z,1509679508.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:08.412Z,1509679508.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:08.783Z,1509679508.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:09.187Z,1509679509.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:09.584Z,1509679509.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:10.045Z,1509679510.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:10.408Z,1509679510.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:10.802Z,1509679510.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:11.187Z,1509679511.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:11.591Z,1509679511.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:12.038Z,1509679512.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:12.391Z,1509679512.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:12.784Z,1509679512.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:13.203Z,1509679513.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:13.650Z,1509679513.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:13.995Z,1509679513.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:14.375Z,1509679514.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:14.817Z,1509679514.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:15.179Z,1509679515.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:15.619Z,1509679515.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:16.004Z,1509679516.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:16.431Z,1509679516.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:16.827Z,1509679516.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:17.173Z,1509679517.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:17.599Z,1509679517.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:17.974Z,1509679517.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:18.375Z,1509679518.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:18.779Z,1509679518.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:19.204Z,1509679519.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:19.608Z,1509679519.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:19.988Z,1509679519.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:20.378Z,1509679520.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:20.788Z,1509679520.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:21.179Z,1509679521.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:21.578Z,1509679521.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:22.055Z,1509679522.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:22.420Z,1509679522.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:22.795Z,1509679522.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:23.191Z,1509679523.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:23.591Z,1509679523.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:24.043Z,1509679524.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:24.399Z,1509679524.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:24.795Z,1509679524.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:25.207Z,1509679525.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:25.603Z,1509679525.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:26.055Z,1509679526.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:26.402Z,1509679526.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:26.775Z,1509679526.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:27.214Z,1509679527.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:27.574Z,1509679527.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:27.992Z,1509679527.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:28.392Z,1509679528.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:28.842Z,1509679528.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:29.183Z,1509679529.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:29.591Z,1509679529.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:30.018Z,1509679530.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:30.396Z,1509679530.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:30.820Z,1509679530.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:31.230Z,1509679531.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:31.595Z,1509679531.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:31.995Z,1509679531.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:32.382Z,1509679532.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:32.781Z,1509679532.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:33.183Z,1509679533.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:33.583Z,1509679533.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:33.991Z,1509679533.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:34.395Z,1509679534.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:34.791Z,1509679534.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:35.183Z,1509679535.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:35.579Z,1509679535.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:36.039Z,1509679536.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:36.407Z,1509679536.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:36.787Z,1509679536.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:37.202Z,1509679537.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:37.608Z,1509679537.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:38.047Z,1509679538.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:38.407Z,1509679538.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:38.776Z,1509679538.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:39.202Z,1509679539.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:39.576Z,1509679539.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:40.063Z,1509679540.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:40.429Z,1509679540.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:40.821Z,1509679540.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:41.181Z,1509679541.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:41.626Z,1509679541.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:41.983Z,1509679541.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:42.387Z,1509679542.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:42.778Z,1509679542.778 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T03:25:42.778Z,1509679542.778 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:25:42.778Z,1509679542.778 [BPC1](ERROR): Data Fault
2017-11-03T03:25:42.791Z,1509679542.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:42.889Z,1509679542.889 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:25:43.201Z,1509679543.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:43.591Z,1509679543.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:43.995Z,1509679543.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:44.088Z,1509679544.088 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:25:44.089Z,1509679544.089 [BPC1] No Fault, FailCount= 1
2017-11-03T03:25:44.435Z,1509679544.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:44.781Z,1509679544.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:45.250Z,1509679545.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:45.591Z,1509679545.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:45.997Z,1509679545.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:46.404Z,1509679546.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:46.793Z,1509679546.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:47.190Z,1509679547.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:47.591Z,1509679547.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:47.998Z,1509679547.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:48.386Z,1509679548.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:48.795Z,1509679548.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:49.196Z,1509679549.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:49.604Z,1509679549.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:50.066Z,1509679550.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:50.408Z,1509679550.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:50.807Z,1509679550.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:51.188Z,1509679551.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:51.591Z,1509679551.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:52.098Z,1509679552.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:52.415Z,1509679552.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:52.807Z,1509679552.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:53.196Z,1509679553.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:53.610Z,1509679553.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:54.051Z,1509679554.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:54.408Z,1509679554.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:54.805Z,1509679554.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:55.246Z,1509679555.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:55.625Z,1509679555.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:56.082Z,1509679556.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:56.121Z,1509679556.121 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:25:56.121Z,1509679556.121 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T03:25:56.121Z,1509679556.121 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:25:56.229Z,1509679556.229 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:25:56.394Z,1509679556.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.3 s old, using for 20.0 s.
2017-11-03T03:25:56.395Z,1509679556.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:56.524Z,1509679556.524 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:25:56.685Z,1509679556.685 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:25:56.796Z,1509679556.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.7 s old, using for 20.0 s.
2017-11-03T03:25:56.797Z,1509679556.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:57.247Z,1509679557.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:25:57.248Z,1509679557.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:57.615Z,1509679557.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-03T03:25:57.621Z,1509679557.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:57.648Z,1509679557.648 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T03:20:57.3Z
2017-11-03T03:25:57.648Z,1509679557.648 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T03:25:57.652Z,1509679557.652 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T03:25:58.041Z,1509679558.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:25:58.042Z,1509679558.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:58.141Z,1509679558.141 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:25:58.141Z,1509679558.141 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T03:25:58.301Z,1509679558.301 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:25:58.301Z,1509679558.301 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:25:58.301Z,1509679558.301 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:25:58.301Z,1509679558.301 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:25:59.035Z,1509679559.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-03T03:25:59.036Z,1509679559.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:25:59.234Z,1509679559.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:25:59.235Z,1509679559.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:02.532Z,1509679562.532 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:26:02.647Z,1509679562.647 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:26:02.649Z,1509679562.649 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:26:02.650Z,1509679562.650 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:26:02.650Z,1509679562.650 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:26:05.644Z,1509679565.644 [PNI_TCM](ERROR): CRC does not match. Expected:0x28136 got:0x45590
2017-11-03T03:26:05.645Z,1509679565.645 [PNI_TCM](ERROR): CRC does not match. Expected:0x2082 got:0x45585
2017-11-03T03:26:05.645Z,1509679565.645 [PNI_TCM](ERROR): CRC does not match. Expected:0x1831 got:0x45579
2017-11-03T03:26:05.646Z,1509679565.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x40559 got:0x45580
2017-11-03T03:26:05.646Z,1509679565.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x61787 got:0x45581
2017-11-03T03:26:05.646Z,1509679565.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x61591 got:0x45578
2017-11-03T03:26:05.647Z,1509679565.647 [PNI_TCM](ERROR): CRC does not match. Expected:0x28077 got:0x45582
2017-11-03T03:26:05.647Z,1509679565.647 [PNI_TCM](ERROR): CRC does not match. Expected:0x58757 got:0x45585
2017-11-03T03:26:05.647Z,1509679565.647 [PNI_TCM](ERROR): CRC does not match. Expected:0x47837 got:0x45583
2017-11-03T03:26:05.648Z,1509679565.648 [PNI_TCM](ERROR): CRC does not match. Expected:0x30987 got:0x45583
2017-11-03T03:26:05.648Z,1509679565.648 [PNI_TCM](ERROR): CRC does not match. Expected:0x5092 got:0x45580
2017-11-03T03:26:05.649Z,1509679565.649 [PNI_TCM](ERROR): CRC does not match. Expected:0x3844 got:0x45577
2017-11-03T03:26:05.649Z,1509679565.649 [PNI_TCM](ERROR): CRC does not match. Expected:0x14238 got:0x45581
2017-11-03T03:26:05.649Z,1509679565.649 [PNI_TCM](ERROR): CRC does not match. Expected:0x29878 got:0x45578
2017-11-03T03:26:05.650Z,1509679565.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x63471 got:0x45581
2017-11-03T03:26:05.650Z,1509679565.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x28572 got:0x45579
2017-11-03T03:26:05.664Z,1509679565.664 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2017-11-03T03:26:05.664Z,1509679565.664 [PNI_TCM] Data Fault, FailCount= 1
2017-11-03T03:26:05.664Z,1509679565.664 [PNI_TCM](ERROR): Data Fault
2017-11-03T03:26:05.730Z,1509679565.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.495768 seconds old.
2017-11-03T03:26:05.731Z,1509679565.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:05.732Z,1509679565.732 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.495666 seconds old.
2017-11-03T03:26:05.742Z,1509679565.742 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.500447 seconds old.
2017-11-03T03:26:05.842Z,1509679565.842 [CBIT](ERROR): Data Fault in component: PNI_TCM
2017-11-03T03:26:05.853Z,1509679565.853 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0076.lzma
2017-11-03T03:26:05.874Z,1509679565.874 [PNI_TCM](INFO): Powering down
2017-11-03T03:26:05.881Z,1509679565.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.647254 seconds old.
2017-11-03T03:26:05.882Z,1509679565.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:05.883Z,1509679565.883 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.647020 seconds old.
2017-11-03T03:26:05.884Z,1509679565.884 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.642960 seconds old.
2017-11-03T03:26:06.289Z,1509679566.289 [PNI_TCM](FAULT): LCB fault:  Software Overcurrent.
2017-11-03T03:26:06.289Z,1509679566.289 [PNI_TCM] Hardware Fault, FailCount= 1
2017-11-03T03:26:06.289Z,1509679566.289 [PNI_TCM](ERROR): Hardware Fault
2017-11-03T03:26:06.319Z,1509679566.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.085074 seconds old.
2017-11-03T03:26:06.320Z,1509679566.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:06.321Z,1509679566.321 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.084932 seconds old.
2017-11-03T03:26:06.322Z,1509679566.322 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.080880 seconds old.
2017-11-03T03:26:06.659Z,1509679566.659 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0076.lzma.bak
2017-11-03T03:26:06.659Z,1509679566.659 [DataOverHttps](INFO): SBD MOMSN=5182589
2017-11-03T03:26:06.720Z,1509679566.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.486080 seconds old.
2017-11-03T03:26:06.721Z,1509679566.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:06.722Z,1509679566.722 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.486156 seconds old.
2017-11-03T03:26:06.723Z,1509679566.723 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.482109 seconds old.
2017-11-03T03:26:07.333Z,1509679567.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.099523 seconds old.
2017-11-03T03:26:07.335Z,1509679567.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:07.335Z,1509679567.335 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.099319 seconds old.
2017-11-03T03:26:07.337Z,1509679567.337 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.095591 seconds old.
2017-11-03T03:26:07.434Z,1509679567.434 [CBIT](INFO): Clearing failed state for component PNI_TCM
2017-11-03T03:26:07.434Z,1509679567.434 [PNI_TCM] No Fault, FailCount= 1
2017-11-03T03:26:07.507Z,1509679567.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.273141 seconds old.
2017-11-03T03:26:07.510Z,1509679567.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:07.511Z,1509679567.511 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.274723 seconds old.
2017-11-03T03:26:07.513Z,1509679567.513 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.271915 seconds old.
2017-11-03T03:26:10.655Z,1509679570.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.421313 seconds old.
2017-11-03T03:26:10.657Z,1509679570.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:10.657Z,1509679570.657 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.421387 seconds old.
2017-11-03T03:26:10.659Z,1509679570.659 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.417376 seconds old.
2017-11-03T03:26:10.817Z,1509679570.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.583337 seconds old.
2017-11-03T03:26:10.818Z,1509679570.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:10.819Z,1509679570.819 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.583200 seconds old.
2017-11-03T03:26:10.821Z,1509679570.821 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.579188 seconds old.
2017-11-03T03:26:11.229Z,1509679571.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.995385 seconds old.
2017-11-03T03:26:11.230Z,1509679571.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:11.231Z,1509679571.231 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.995248 seconds old.
2017-11-03T03:26:11.233Z,1509679571.233 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.991590 seconds old.
2017-11-03T03:26:11.651Z,1509679571.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.417146 seconds old.
2017-11-03T03:26:11.653Z,1509679571.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:11.653Z,1509679571.653 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.417389 seconds old.
2017-11-03T03:26:11.655Z,1509679571.655 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.413399 seconds old.
2017-11-03T03:26:12.021Z,1509679572.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.787319 seconds old.
2017-11-03T03:26:12.022Z,1509679572.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:12.023Z,1509679572.023 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.787122 seconds old.
2017-11-03T03:26:12.025Z,1509679572.025 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.783105 seconds old.
2017-11-03T03:26:12.413Z,1509679572.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.179069 seconds old.
2017-11-03T03:26:12.414Z,1509679572.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:12.415Z,1509679572.415 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.178881 seconds old.
2017-11-03T03:26:12.416Z,1509679572.416 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.174865 seconds old.
2017-11-03T03:26:15.674Z,1509679575.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:23.682Z,1509679583.682 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20171103T001125/Express0077.lzma
2017-11-03T03:26:23.726Z,1509679583.726 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:26:23.726Z,1509679583.726 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:26:23.726Z,1509679583.726 [BPC1](ERROR): Communications Fault
2017-11-03T03:26:23.735Z,1509679583.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:23.825Z,1509679583.825 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:26:23.903Z,1509679583.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:24.715Z,1509679584.715 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0077.lzma.bak
2017-11-03T03:26:24.715Z,1509679584.715 [DataOverHttps](INFO): SBD MOMSN=5182591
2017-11-03T03:26:24.798Z,1509679584.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:25.508Z,1509679585.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:25.511Z,1509679585.511 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T03:26:25.511Z,1509679585.511 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T03:26:25.511Z,1509679585.511 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T03:26:25.600Z,1509679585.600 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:26:25.600Z,1509679585.600 [BPC1] No Fault, FailCount= 1
2017-11-03T03:26:25.743Z,1509679585.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:28.893Z,1509679588.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:29.119Z,1509679589.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:29.501Z,1509679589.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:29.900Z,1509679589.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:30.299Z,1509679590.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:30.683Z,1509679590.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:31.095Z,1509679591.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:31.499Z,1509679591.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:31.898Z,1509679591.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:32.299Z,1509679592.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:32.703Z,1509679592.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:33.076Z,1509679593.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:33.511Z,1509679593.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:33.904Z,1509679593.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:34.305Z,1509679594.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:34.708Z,1509679594.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:35.074Z,1509679595.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:35.518Z,1509679595.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:35.882Z,1509679595.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:36.278Z,1509679596.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:36.687Z,1509679596.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:37.089Z,1509679597.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:37.488Z,1509679597.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:37.909Z,1509679597.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:38.286Z,1509679598.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:38.678Z,1509679598.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:39.088Z,1509679599.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:39.485Z,1509679599.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:39.885Z,1509679599.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:40.289Z,1509679600.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:40.739Z,1509679600.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:41.127Z,1509679601.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:41.485Z,1509679601.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:41.884Z,1509679601.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:42.327Z,1509679602.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:42.691Z,1509679602.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:43.175Z,1509679603.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:43.509Z,1509679603.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:43.927Z,1509679603.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:44.286Z,1509679604.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:44.691Z,1509679604.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:44.798Z,1509679604.798 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T03:26:44.799Z,1509679604.799 [DropWeight] No Fault, FailCount= 1
2017-11-03T03:26:45.091Z,1509679605.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:45.483Z,1509679605.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:45.889Z,1509679605.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:46.289Z,1509679606.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:46.711Z,1509679606.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:47.080Z,1509679607.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:47.535Z,1509679607.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:47.884Z,1509679607.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:48.281Z,1509679608.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:48.685Z,1509679608.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:49.093Z,1509679609.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:49.563Z,1509679609.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:49.889Z,1509679609.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:50.286Z,1509679610.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:50.685Z,1509679610.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:51.098Z,1509679611.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:51.486Z,1509679611.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:51.890Z,1509679611.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:52.295Z,1509679612.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:52.698Z,1509679612.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:53.086Z,1509679613.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:53.483Z,1509679613.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:53.885Z,1509679613.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:54.281Z,1509679614.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:54.683Z,1509679614.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:55.093Z,1509679615.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:55.534Z,1509679615.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:55.943Z,1509679615.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:56.277Z,1509679616.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:56.679Z,1509679616.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:57.108Z,1509679617.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:57.514Z,1509679617.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:57.888Z,1509679617.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:58.318Z,1509679618.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:58.714Z,1509679618.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:59.079Z,1509679619.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:59.487Z,1509679619.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:26:59.888Z,1509679619.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:00.333Z,1509679620.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:00.689Z,1509679620.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:01.078Z,1509679621.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:01.485Z,1509679621.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:01.888Z,1509679621.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:02.301Z,1509679622.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:02.700Z,1509679622.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:03.087Z,1509679623.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:03.543Z,1509679623.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:03.907Z,1509679623.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:04.303Z,1509679624.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:04.698Z,1509679624.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:05.083Z,1509679625.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:05.484Z,1509679625.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:05.886Z,1509679625.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:06.286Z,1509679626.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:06.691Z,1509679626.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:07.104Z,1509679627.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:07.503Z,1509679627.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:07.899Z,1509679627.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:08.288Z,1509679628.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:08.684Z,1509679628.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:09.083Z,1509679629.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:09.487Z,1509679629.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:09.899Z,1509679629.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:10.342Z,1509679630.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:10.711Z,1509679630.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:11.117Z,1509679631.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:11.519Z,1509679631.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:11.901Z,1509679631.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:12.334Z,1509679632.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:12.733Z,1509679632.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:13.088Z,1509679633.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:13.488Z,1509679633.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:13.897Z,1509679633.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:14.300Z,1509679634.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:14.703Z,1509679634.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:15.089Z,1509679635.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:15.510Z,1509679635.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:15.875Z,1509679635.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:16.276Z,1509679636.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:16.672Z,1509679636.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:17.103Z,1509679637.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:17.561Z,1509679637.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:17.908Z,1509679637.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:18.279Z,1509679638.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:18.683Z,1509679638.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:19.107Z,1509679639.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:19.487Z,1509679639.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:19.907Z,1509679639.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:20.308Z,1509679640.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:20.707Z,1509679640.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:21.106Z,1509679641.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:21.483Z,1509679641.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:21.887Z,1509679641.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:22.287Z,1509679642.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:22.682Z,1509679642.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:23.107Z,1509679643.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:23.507Z,1509679643.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:23.909Z,1509679643.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:24.281Z,1509679644.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:24.742Z,1509679644.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:25.131Z,1509679645.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:25.485Z,1509679645.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:25.931Z,1509679645.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:29.082Z,1509679649.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:29.283Z,1509679649.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:29.671Z,1509679649.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:30.035Z,1509679650.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:30.433Z,1509679650.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:30.837Z,1509679650.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:31.237Z,1509679651.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:31.641Z,1509679651.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:32.031Z,1509679652.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:32.439Z,1509679652.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:32.836Z,1509679652.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:33.266Z,1509679653.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:33.637Z,1509679653.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:34.034Z,1509679654.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:34.431Z,1509679654.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:34.840Z,1509679654.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:35.236Z,1509679655.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:35.636Z,1509679655.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:36.035Z,1509679656.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:36.428Z,1509679656.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:36.837Z,1509679656.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:37.266Z,1509679657.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:37.637Z,1509679657.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:38.036Z,1509679658.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:38.438Z,1509679658.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:38.847Z,1509679658.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:39.244Z,1509679659.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:39.650Z,1509679659.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:40.039Z,1509679660.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:40.433Z,1509679660.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:40.850Z,1509679660.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:41.329Z,1509679661.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:41.694Z,1509679661.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:42.055Z,1509679662.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:42.438Z,1509679662.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:42.882Z,1509679662.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:43.245Z,1509679663.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:43.682Z,1509679663.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:44.080Z,1509679664.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:44.435Z,1509679664.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:44.851Z,1509679664.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:45.249Z,1509679665.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:45.651Z,1509679665.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:46.035Z,1509679666.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:46.432Z,1509679666.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:46.842Z,1509679666.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:47.240Z,1509679667.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:47.645Z,1509679667.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:48.039Z,1509679668.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:48.441Z,1509679668.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:48.840Z,1509679668.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:49.259Z,1509679669.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:49.647Z,1509679669.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:50.044Z,1509679670.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:50.443Z,1509679670.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:50.841Z,1509679670.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:51.244Z,1509679671.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:51.640Z,1509679671.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:52.043Z,1509679672.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:52.451Z,1509679672.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:52.854Z,1509679672.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:52.856Z,1509679672.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:52.856Z,1509679672.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2017-11-03T03:27:52.856Z,1509679672.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:27:52.858Z,1509679672.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:52.858Z,1509679672.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2017-11-03T03:27:52.858Z,1509679672.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:27:52.937Z,1509679672.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:27:52.937Z,1509679672.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:27:53.227Z,1509679673.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:53.328Z,1509679673.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:27:53.329Z,1509679673.329 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2017-11-03T03:27:53.329Z,1509679673.329 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:27:53.329Z,1509679673.329 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2017-11-03T03:27:53.646Z,1509679673.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:53.646Z,1509679673.646 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2017-11-03T03:27:53.646Z,1509679673.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:27:53.647Z,1509679673.647 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:27:53.647Z,1509679673.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:27:53.648Z,1509679673.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:27:53.648Z,1509679673.648 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:27:53.649Z,1509679673.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:27:53.649Z,1509679673.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:27:53.737Z,1509679673.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:27:54.104Z,1509679674.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:27:54.104Z,1509679674.104 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2017-11-03T03:27:54.426Z,1509679674.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:27:54.427Z,1509679674.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:27:54.427Z,1509679674.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:27:54.836Z,1509679674.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:55.288Z,1509679675.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:55.643Z,1509679675.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:56.080Z,1509679676.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:56.475Z,1509679676.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:56.840Z,1509679676.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:57.275Z,1509679677.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:57.654Z,1509679677.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:58.074Z,1509679678.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:58.340Z,1509679678.340 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:27:58.340Z,1509679678.340 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T03:27:58.340Z,1509679678.340 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:27:58.498Z,1509679678.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:27:58.499Z,1509679678.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:58.625Z,1509679678.625 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:27:58.625Z,1509679678.625 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T03:27:58.744Z,1509679678.744 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:27:58.881Z,1509679678.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:27:58.882Z,1509679678.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:58.959Z,1509679678.959 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:27:59.248Z,1509679679.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:27:59.249Z,1509679679.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:27:59.644Z,1509679679.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:27:59.645Z,1509679679.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:00.042Z,1509679680.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:28:00.043Z,1509679680.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:00.439Z,1509679680.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:28:00.440Z,1509679680.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:00.846Z,1509679680.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:28:00.847Z,1509679680.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:01.249Z,1509679681.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:28:01.250Z,1509679681.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:01.643Z,1509679681.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:28:01.648Z,1509679681.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:02.024Z,1509679682.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:28:02.025Z,1509679682.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:02.423Z,1509679682.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T03:28:02.423Z,1509679682.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:02.847Z,1509679682.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:28:02.848Z,1509679682.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:03.247Z,1509679683.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:28:03.248Z,1509679683.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:03.648Z,1509679683.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:28:03.649Z,1509679683.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:04.024Z,1509679684.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:28:04.025Z,1509679684.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:04.423Z,1509679684.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T03:28:04.424Z,1509679684.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:04.848Z,1509679684.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:28:04.849Z,1509679684.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:05.228Z,1509679685.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:28:05.245Z,1509679685.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:05.651Z,1509679685.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:28:05.652Z,1509679685.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:06.022Z,1509679686.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-03T03:28:06.023Z,1509679686.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:06.426Z,1509679686.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:28:06.427Z,1509679686.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:06.851Z,1509679686.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:28:06.852Z,1509679686.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:07.258Z,1509679687.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:28:07.259Z,1509679687.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:07.651Z,1509679687.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:28:07.652Z,1509679687.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:08.026Z,1509679688.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:28:08.027Z,1509679688.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:08.422Z,1509679688.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-03T03:28:08.423Z,1509679688.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:08.851Z,1509679688.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:28:08.852Z,1509679688.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:09.251Z,1509679689.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:28:09.252Z,1509679689.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:09.651Z,1509679689.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T03:28:09.652Z,1509679689.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:10.052Z,1509679690.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:28:10.053Z,1509679690.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:10.466Z,1509679690.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:28:10.467Z,1509679690.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:10.879Z,1509679690.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:28:10.880Z,1509679690.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:11.251Z,1509679691.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:28:11.252Z,1509679691.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:11.674Z,1509679691.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T03:28:11.675Z,1509679691.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:12.027Z,1509679692.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T03:28:12.028Z,1509679692.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:12.458Z,1509679692.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:28:12.459Z,1509679692.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:12.874Z,1509679692.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:28:12.875Z,1509679692.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:13.255Z,1509679693.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:28:13.256Z,1509679693.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:13.632Z,1509679693.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:28:13.633Z,1509679693.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:14.027Z,1509679694.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:28:14.028Z,1509679694.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:14.426Z,1509679694.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:28:14.427Z,1509679694.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:14.855Z,1509679694.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:28:14.856Z,1509679694.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:15.253Z,1509679695.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:28:15.254Z,1509679695.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:15.653Z,1509679695.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T03:28:15.654Z,1509679695.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:16.034Z,1509679696.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:28:16.035Z,1509679696.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:16.432Z,1509679696.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:28:16.433Z,1509679696.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:16.855Z,1509679696.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T03:28:16.856Z,1509679696.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:17.256Z,1509679697.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:28:17.261Z,1509679697.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:17.658Z,1509679697.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:28:17.659Z,1509679697.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:18.028Z,1509679698.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T03:28:18.029Z,1509679698.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:18.435Z,1509679698.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:18.857Z,1509679698.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:19.240Z,1509679699.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:19.657Z,1509679699.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:20.029Z,1509679700.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:20.428Z,1509679700.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:20.857Z,1509679700.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:21.237Z,1509679701.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:21.637Z,1509679701.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:22.032Z,1509679702.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:22.430Z,1509679702.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:22.863Z,1509679702.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:23.264Z,1509679703.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:23.643Z,1509679703.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:24.033Z,1509679704.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:24.435Z,1509679704.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:24.883Z,1509679704.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:25.301Z,1509679705.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:25.633Z,1509679705.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:26.071Z,1509679706.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:29.128Z,1509679709.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:29.311Z,1509679709.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:29.710Z,1509679709.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:30.082Z,1509679710.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:30.467Z,1509679710.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:30.867Z,1509679710.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:31.263Z,1509679711.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:31.667Z,1509679711.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:32.073Z,1509679712.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:32.476Z,1509679712.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:32.868Z,1509679712.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:33.267Z,1509679713.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:33.670Z,1509679713.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:34.063Z,1509679714.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:34.467Z,1509679714.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:34.876Z,1509679714.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:35.271Z,1509679715.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:35.672Z,1509679715.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:36.065Z,1509679716.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:36.463Z,1509679716.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:36.873Z,1509679716.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:37.282Z,1509679717.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:37.673Z,1509679717.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:38.068Z,1509679718.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:38.470Z,1509679718.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:38.872Z,1509679718.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:39.272Z,1509679719.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:39.682Z,1509679719.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:40.068Z,1509679720.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:40.467Z,1509679720.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:40.871Z,1509679720.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:41.275Z,1509679721.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:41.699Z,1509679721.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:42.095Z,1509679722.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:42.450Z,1509679722.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:42.904Z,1509679722.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:43.275Z,1509679723.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:43.702Z,1509679723.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:44.087Z,1509679724.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:44.470Z,1509679724.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:44.879Z,1509679724.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:45.279Z,1509679725.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:45.678Z,1509679725.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:46.052Z,1509679726.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:46.478Z,1509679726.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:46.887Z,1509679726.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:47.276Z,1509679727.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:47.675Z,1509679727.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:48.055Z,1509679728.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:48.450Z,1509679728.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:48.879Z,1509679728.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:49.280Z,1509679729.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:49.679Z,1509679729.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:50.058Z,1509679730.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:50.458Z,1509679730.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:50.880Z,1509679730.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:51.285Z,1509679731.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:51.684Z,1509679731.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:52.055Z,1509679732.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:52.455Z,1509679732.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:52.890Z,1509679732.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:53.282Z,1509679733.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:53.683Z,1509679733.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:54.056Z,1509679734.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:54.455Z,1509679734.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:54.883Z,1509679734.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:55.279Z,1509679735.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:55.681Z,1509679735.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:56.103Z,1509679736.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:56.456Z,1509679736.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:56.906Z,1509679736.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:57.287Z,1509679737.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:57.661Z,1509679737.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:58.091Z,1509679738.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:58.456Z,1509679738.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:58.904Z,1509679738.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:59.303Z,1509679739.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:28:59.685Z,1509679739.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:00.061Z,1509679740.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:00.460Z,1509679740.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:00.892Z,1509679740.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:01.290Z,1509679741.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:01.661Z,1509679741.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:02.060Z,1509679742.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:02.456Z,1509679742.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:02.890Z,1509679742.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:03.287Z,1509679743.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:03.695Z,1509679743.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:04.060Z,1509679744.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:04.460Z,1509679744.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:04.893Z,1509679744.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:05.261Z,1509679745.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:05.665Z,1509679745.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:06.062Z,1509679746.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:06.461Z,1509679746.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:06.865Z,1509679746.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:07.222Z,1509679747.222 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T03:29:07.222Z,1509679747.222 [NAL9602] Data Fault, FailCount= 3
2017-11-03T03:29:07.222Z,1509679747.222 [NAL9602](ERROR): Data Fault
2017-11-03T03:29:07.298Z,1509679747.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:07.384Z,1509679747.384 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T03:29:07.622Z,1509679747.622 [NAL9602](INFO): Powering down
2017-11-03T03:29:07.668Z,1509679747.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:08.058Z,1509679748.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:08.461Z,1509679748.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:08.552Z,1509679748.552 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T03:29:08.553Z,1509679748.553 [NAL9602] No Fault, FailCount= 3
2017-11-03T03:29:08.861Z,1509679748.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:09.258Z,1509679749.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:09.667Z,1509679749.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:10.054Z,1509679750.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:10.461Z,1509679750.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:10.856Z,1509679750.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:11.304Z,1509679751.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:11.715Z,1509679751.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:12.056Z,1509679752.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:12.461Z,1509679752.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:12.903Z,1509679752.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:13.260Z,1509679753.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:13.703Z,1509679753.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:14.087Z,1509679754.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:14.460Z,1509679754.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:14.861Z,1509679754.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:15.259Z,1509679755.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:15.661Z,1509679755.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:16.056Z,1509679756.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:16.459Z,1509679756.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:16.856Z,1509679756.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:17.260Z,1509679757.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:17.659Z,1509679757.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:18.060Z,1509679758.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:18.460Z,1509679758.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:18.866Z,1509679758.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:19.256Z,1509679759.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:19.667Z,1509679759.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:20.060Z,1509679760.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:20.456Z,1509679760.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:20.860Z,1509679760.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:21.260Z,1509679761.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:21.666Z,1509679761.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:22.101Z,1509679762.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:22.475Z,1509679762.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:22.866Z,1509679762.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:23.261Z,1509679763.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:23.660Z,1509679763.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:24.067Z,1509679764.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:24.461Z,1509679764.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:24.860Z,1509679764.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:25.266Z,1509679765.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:25.660Z,1509679765.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:26.134Z,1509679766.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:29.135Z,1509679769.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:29.314Z,1509679769.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:29.708Z,1509679769.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:30.113Z,1509679770.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:30.487Z,1509679770.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:30.915Z,1509679770.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:31.323Z,1509679771.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:31.686Z,1509679771.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:32.086Z,1509679772.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:32.485Z,1509679772.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:32.890Z,1509679772.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:33.287Z,1509679773.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:33.686Z,1509679773.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:34.087Z,1509679774.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:34.490Z,1509679774.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:34.886Z,1509679774.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:35.314Z,1509679775.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:35.692Z,1509679775.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:36.091Z,1509679776.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:36.487Z,1509679776.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:36.887Z,1509679776.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:37.287Z,1509679777.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:37.662Z,1509679777.662 [NAL9602](INFO): Powering up NAL9602
2017-11-03T03:29:37.714Z,1509679777.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:38.090Z,1509679778.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:38.491Z,1509679778.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:38.889Z,1509679778.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:39.291Z,1509679779.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:39.687Z,1509679779.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:40.087Z,1509679780.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:40.517Z,1509679780.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:40.919Z,1509679780.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:41.288Z,1509679781.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:41.695Z,1509679781.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:42.102Z,1509679782.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:42.499Z,1509679782.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:42.898Z,1509679782.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:43.372Z,1509679783.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:43.695Z,1509679783.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:44.100Z,1509679784.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:44.532Z,1509679784.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:44.894Z,1509679784.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:45.335Z,1509679785.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:45.729Z,1509679785.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:46.127Z,1509679786.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:46.496Z,1509679786.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:46.902Z,1509679786.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:47.299Z,1509679787.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:47.703Z,1509679787.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:48.097Z,1509679788.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:48.506Z,1509679788.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:48.855Z,1509679788.855 [NAL9602](INFO): NAL9602 initialized
2017-11-03T03:29:48.902Z,1509679788.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:49.307Z,1509679789.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:49.706Z,1509679789.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:50.106Z,1509679790.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:50.500Z,1509679790.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:50.903Z,1509679790.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:51.299Z,1509679791.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:51.701Z,1509679791.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:52.100Z,1509679792.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:52.507Z,1509679792.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:52.907Z,1509679792.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:53.306Z,1509679793.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:53.701Z,1509679793.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:54.107Z,1509679794.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:54.499Z,1509679794.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:54.904Z,1509679794.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:55.306Z,1509679795.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:55.730Z,1509679795.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:56.110Z,1509679796.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:56.500Z,1509679796.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:56.900Z,1509679796.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:57.295Z,1509679797.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:57.762Z,1509679797.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:58.094Z,1509679798.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:58.515Z,1509679798.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:58.942Z,1509679798.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:59.308Z,1509679799.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:29:59.738Z,1509679799.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:00.135Z,1509679800.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:00.519Z,1509679800.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:00.897Z,1509679800.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:01.313Z,1509679801.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:01.719Z,1509679801.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:02.131Z,1509679802.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:02.497Z,1509679802.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:02.901Z,1509679802.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:03.301Z,1509679803.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:03.713Z,1509679803.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:04.092Z,1509679804.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:04.510Z,1509679804.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:04.913Z,1509679804.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:05.331Z,1509679805.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:05.698Z,1509679805.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:06.102Z,1509679806.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:06.501Z,1509679806.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:06.919Z,1509679806.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:07.312Z,1509679807.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:07.719Z,1509679807.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:08.115Z,1509679808.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:08.507Z,1509679808.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:08.898Z,1509679808.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:09.306Z,1509679809.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:09.703Z,1509679809.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:10.112Z,1509679810.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:10.511Z,1509679810.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:10.907Z,1509679810.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:11.319Z,1509679811.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:11.719Z,1509679811.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:12.097Z,1509679812.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:12.542Z,1509679812.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:12.951Z,1509679812.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:13.319Z,1509679813.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:13.707Z,1509679813.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:14.150Z,1509679814.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:14.501Z,1509679814.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:14.942Z,1509679814.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:15.297Z,1509679815.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:15.737Z,1509679815.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:16.098Z,1509679816.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:16.508Z,1509679816.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:16.915Z,1509679816.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:17.312Z,1509679817.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:17.719Z,1509679817.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:18.107Z,1509679818.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:18.497Z,1509679818.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:18.902Z,1509679818.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:19.312Z,1509679819.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:19.724Z,1509679819.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:20.115Z,1509679820.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:20.504Z,1509679820.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:20.897Z,1509679820.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:21.305Z,1509679821.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:21.701Z,1509679821.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:22.101Z,1509679822.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:22.514Z,1509679822.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:22.936Z,1509679822.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:23.323Z,1509679823.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:23.703Z,1509679823.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:24.104Z,1509679824.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:24.522Z,1509679824.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:24.901Z,1509679824.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:25.311Z,1509679825.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:25.720Z,1509679825.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:26.138Z,1509679826.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:29.267Z,1509679829.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:29.425Z,1509679829.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:29.844Z,1509679829.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:30.247Z,1509679830.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:30.625Z,1509679830.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:31.051Z,1509679831.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:31.450Z,1509679831.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:31.821Z,1509679831.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:32.221Z,1509679832.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:32.647Z,1509679832.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:33.045Z,1509679833.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:33.425Z,1509679833.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:33.819Z,1509679833.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:34.219Z,1509679834.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:34.620Z,1509679834.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:35.019Z,1509679835.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:35.422Z,1509679835.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:35.849Z,1509679835.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:36.247Z,1509679836.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:36.618Z,1509679836.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:37.019Z,1509679837.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:37.418Z,1509679837.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:37.823Z,1509679837.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:38.219Z,1509679838.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:38.623Z,1509679838.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:39.045Z,1509679839.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:39.424Z,1509679839.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:39.818Z,1509679839.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:40.223Z,1509679840.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:40.623Z,1509679840.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:41.018Z,1509679841.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:41.424Z,1509679841.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:41.826Z,1509679841.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:42.247Z,1509679842.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:42.619Z,1509679842.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:43.019Z,1509679843.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:43.469Z,1509679843.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:43.870Z,1509679843.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:44.218Z,1509679844.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:44.674Z,1509679844.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:45.020Z,1509679845.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:45.454Z,1509679845.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:45.850Z,1509679845.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:46.218Z,1509679846.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:46.619Z,1509679846.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:47.018Z,1509679847.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:47.448Z,1509679847.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:47.824Z,1509679847.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:48.231Z,1509679848.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:48.623Z,1509679848.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:49.023Z,1509679849.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:49.418Z,1509679849.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:49.819Z,1509679849.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:50.218Z,1509679850.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:50.624Z,1509679850.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:51.032Z,1509679851.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:51.432Z,1509679851.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:51.820Z,1509679851.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:52.218Z,1509679852.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:52.655Z,1509679852.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:53.022Z,1509679853.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:53.431Z,1509679853.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:53.853Z,1509679853.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:53.855Z,1509679853.855 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:53.855Z,1509679853.855 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2017-11-03T03:30:53.855Z,1509679853.855 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:30:53.861Z,1509679853.861 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:53.862Z,1509679853.862 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2017-11-03T03:30:53.862Z,1509679853.862 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:30:53.953Z,1509679853.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:30:53.953Z,1509679853.953 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:30:54.257Z,1509679854.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:54.348Z,1509679854.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:30:54.349Z,1509679854.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2017-11-03T03:30:54.349Z,1509679854.349 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:30:54.349Z,1509679854.349 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2017-11-03T03:30:54.638Z,1509679854.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:54.638Z,1509679854.638 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2017-11-03T03:30:54.638Z,1509679854.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:30:54.639Z,1509679854.639 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:30:54.640Z,1509679854.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:30:54.640Z,1509679854.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:30:54.657Z,1509679854.657 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:30:54.657Z,1509679854.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:30:54.657Z,1509679854.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:30:54.737Z,1509679854.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:30:55.165Z,1509679855.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:30:55.165Z,1509679855.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2017-11-03T03:30:55.431Z,1509679855.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:30:55.431Z,1509679855.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:30:55.432Z,1509679855.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:30:55.833Z,1509679855.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:30:55.834Z,1509679855.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:56.237Z,1509679856.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:30:56.238Z,1509679856.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:56.652Z,1509679856.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:30:56.669Z,1509679856.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:57.044Z,1509679857.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:30:57.049Z,1509679857.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:57.471Z,1509679857.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:30:57.472Z,1509679857.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:57.913Z,1509679857.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-03T03:30:57.914Z,1509679857.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:58.267Z,1509679858.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:30:58.268Z,1509679858.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:58.623Z,1509679858.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:30:58.669Z,1509679858.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:59.106Z,1509679859.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T03:30:59.107Z,1509679859.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:59.426Z,1509679859.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:30:59.427Z,1509679859.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:30:59.908Z,1509679859.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T03:30:59.917Z,1509679859.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:00.306Z,1509679860.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T03:31:00.307Z,1509679860.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:00.629Z,1509679860.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:31:00.630Z,1509679860.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:01.019Z,1509679861.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:31:01.020Z,1509679861.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:01.431Z,1509679861.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:31:01.432Z,1509679861.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:01.829Z,1509679861.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:31:01.830Z,1509679861.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:02.227Z,1509679862.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:31:02.228Z,1509679862.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:02.665Z,1509679862.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:31:02.666Z,1509679862.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:03.065Z,1509679863.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:31:03.066Z,1509679863.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:03.439Z,1509679863.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:31:03.440Z,1509679863.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:03.838Z,1509679863.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:31:03.839Z,1509679863.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:04.226Z,1509679864.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:31:04.227Z,1509679864.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:04.620Z,1509679864.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:31:04.621Z,1509679864.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:05.023Z,1509679865.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:31:05.023Z,1509679865.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:05.431Z,1509679865.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:31:05.432Z,1509679865.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:05.832Z,1509679865.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:31:05.833Z,1509679865.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:06.242Z,1509679866.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T03:31:06.243Z,1509679866.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:06.630Z,1509679866.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:31:06.631Z,1509679866.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:07.021Z,1509679867.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:31:07.022Z,1509679867.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:07.430Z,1509679867.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:31:07.431Z,1509679867.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:07.824Z,1509679867.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:31:07.825Z,1509679867.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:08.223Z,1509679868.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T03:31:08.224Z,1509679868.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:08.637Z,1509679868.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T03:31:08.638Z,1509679868.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:09.036Z,1509679869.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:31:09.037Z,1509679869.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:09.433Z,1509679869.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:31:09.434Z,1509679869.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:09.826Z,1509679869.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:31:09.827Z,1509679869.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:10.221Z,1509679870.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:31:10.222Z,1509679870.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:10.625Z,1509679870.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:31:10.625Z,1509679870.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:11.024Z,1509679871.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:31:11.025Z,1509679871.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:11.434Z,1509679871.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:31:11.435Z,1509679871.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:11.842Z,1509679871.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:31:11.843Z,1509679871.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:12.301Z,1509679872.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T03:31:12.302Z,1509679872.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:12.629Z,1509679872.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:31:12.630Z,1509679872.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:13.034Z,1509679873.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:31:13.035Z,1509679873.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:13.529Z,1509679873.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T03:31:13.530Z,1509679873.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:13.811Z,1509679873.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:31:13.828Z,1509679873.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:14.279Z,1509679874.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:31:14.280Z,1509679874.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:14.679Z,1509679874.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:15.036Z,1509679875.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:15.411Z,1509679875.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:15.812Z,1509679875.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:16.236Z,1509679876.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:16.636Z,1509679876.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:17.037Z,1509679877.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:17.435Z,1509679877.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:17.838Z,1509679877.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:18.213Z,1509679878.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:18.633Z,1509679878.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:19.011Z,1509679879.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:19.491Z,1509679879.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:19.835Z,1509679879.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:20.234Z,1509679880.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:20.629Z,1509679880.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:21.011Z,1509679881.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:21.437Z,1509679881.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:21.838Z,1509679881.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:22.211Z,1509679882.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:22.633Z,1509679882.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:23.035Z,1509679883.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:23.433Z,1509679883.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:23.812Z,1509679883.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:24.211Z,1509679884.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:24.612Z,1509679884.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:25.037Z,1509679885.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:25.434Z,1509679885.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:25.839Z,1509679885.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:25.842Z,1509679885.842 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T03:31:25.842Z,1509679885.842 [Default:CheckIn:C.Wait] Stopped
2017-11-03T03:31:25.842Z,1509679885.842 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T03:31:25.842Z,1509679885.842 [Default:CheckIn:D] Running Loop=1
2017-11-03T03:31:26.243Z,1509679886.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:26.246Z,1509679886.246 [Default:CheckIn:D] Stopped
2017-11-03T03:31:26.246Z,1509679886.246 [Default:CheckIn:E] Running Loop=1
2017-11-03T03:31:29.356Z,1509679889.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:29.359Z,1509679889.359 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.311328 min 
2017-11-03T03:31:29.359Z,1509679889.359 [Default:CheckIn:E] Stopped
2017-11-03T03:31:29.360Z,1509679889.360 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T03:31:29.360Z,1509679889.360 [Default:CheckIn] Stopped
2017-11-03T03:31:29.360Z,1509679889.360 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T03:31:29.360Z,1509679889.360 [Default:CheckIn](INFO): Running loop #20
2017-11-03T03:31:29.360Z,1509679889.360 [Default:CheckIn] Running Loop=20
2017-11-03T03:31:29.360Z,1509679889.360 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T03:31:29.360Z,1509679889.360 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T03:31:29.507Z,1509679889.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:29.919Z,1509679889.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:30.317Z,1509679890.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:30.711Z,1509679890.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:31.139Z,1509679891.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:31.506Z,1509679891.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:31.939Z,1509679891.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:32.315Z,1509679892.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:32.736Z,1509679892.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:33.115Z,1509679893.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:33.511Z,1509679893.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:33.906Z,1509679893.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:34.311Z,1509679894.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:34.704Z,1509679894.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:35.106Z,1509679895.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:35.511Z,1509679895.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:35.912Z,1509679895.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:36.318Z,1509679896.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:36.710Z,1509679896.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:37.111Z,1509679897.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:37.505Z,1509679897.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:37.911Z,1509679897.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:38.315Z,1509679898.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:38.711Z,1509679898.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:39.118Z,1509679899.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:39.511Z,1509679899.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:39.906Z,1509679899.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:40.311Z,1509679900.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:40.706Z,1509679900.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:41.105Z,1509679901.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:41.511Z,1509679901.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:41.912Z,1509679901.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:42.312Z,1509679902.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:42.711Z,1509679902.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:43.096Z,1509679903.096 [BPC1](ERROR): Failed to parse message.
2017-11-03T03:31:43.096Z,1509679903.096 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T03:31:43.096Z,1509679903.096 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:31:43.096Z,1509679903.096 [BPC1](ERROR): Data Fault
2017-11-03T03:31:43.111Z,1509679903.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:43.209Z,1509679903.209 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:31:43.507Z,1509679903.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:43.911Z,1509679903.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:44.013Z,1509679904.013 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T03:31:44.315Z,1509679904.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:44.417Z,1509679904.417 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:31:44.417Z,1509679904.417 [BPC1] No Fault, FailCount= 1
2017-11-03T03:31:44.763Z,1509679904.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:45.115Z,1509679905.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:45.539Z,1509679905.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:45.899Z,1509679905.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:46.310Z,1509679906.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:46.706Z,1509679906.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:47.106Z,1509679907.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:47.515Z,1509679907.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:47.915Z,1509679907.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:48.312Z,1509679908.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:48.707Z,1509679908.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:49.111Z,1509679909.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:49.500Z,1509679909.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:49.910Z,1509679909.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:50.315Z,1509679910.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:50.710Z,1509679910.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:51.111Z,1509679911.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:51.511Z,1509679911.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:51.907Z,1509679911.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:52.311Z,1509679912.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:52.705Z,1509679912.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:53.107Z,1509679913.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:53.511Z,1509679913.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:53.912Z,1509679913.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:54.318Z,1509679914.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:54.707Z,1509679914.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:55.111Z,1509679915.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:55.510Z,1509679915.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:55.902Z,1509679915.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:56.335Z,1509679916.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:56.734Z,1509679916.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:57.112Z,1509679917.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:57.543Z,1509679917.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:57.908Z,1509679917.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:58.305Z,1509679918.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:58.746Z,1509679918.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:59.108Z,1509679919.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:59.551Z,1509679919.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:31:59.951Z,1509679919.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:00.323Z,1509679920.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:00.707Z,1509679920.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:01.107Z,1509679921.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:01.508Z,1509679921.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:01.907Z,1509679921.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:02.317Z,1509679922.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:02.723Z,1509679922.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:03.116Z,1509679923.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:03.507Z,1509679923.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:03.901Z,1509679923.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:04.311Z,1509679924.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:04.704Z,1509679924.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:05.110Z,1509679925.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:05.512Z,1509679925.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:05.919Z,1509679925.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:06.312Z,1509679926.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:06.706Z,1509679926.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:07.103Z,1509679927.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:07.508Z,1509679927.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:07.911Z,1509679927.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:08.315Z,1509679928.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:08.715Z,1509679928.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:09.119Z,1509679929.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:09.511Z,1509679929.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:09.910Z,1509679929.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:10.311Z,1509679930.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:10.747Z,1509679930.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:11.105Z,1509679931.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:11.515Z,1509679931.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:11.962Z,1509679931.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:12.326Z,1509679932.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:12.750Z,1509679932.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:13.115Z,1509679933.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:13.531Z,1509679933.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:13.935Z,1509679933.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:14.316Z,1509679934.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:14.726Z,1509679934.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:15.116Z,1509679935.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:15.504Z,1509679935.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:15.904Z,1509679935.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:16.305Z,1509679936.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:16.705Z,1509679936.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:17.105Z,1509679937.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:17.516Z,1509679937.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:17.916Z,1509679937.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:18.312Z,1509679938.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:18.715Z,1509679938.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:19.104Z,1509679939.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:19.507Z,1509679939.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:19.911Z,1509679939.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:20.316Z,1509679940.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:20.720Z,1509679940.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:21.115Z,1509679941.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:21.504Z,1509679941.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:21.906Z,1509679941.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:22.315Z,1509679942.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:22.706Z,1509679942.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:23.105Z,1509679943.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:23.516Z,1509679943.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:23.916Z,1509679943.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:24.363Z,1509679944.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:24.715Z,1509679944.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:25.111Z,1509679945.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:25.505Z,1509679945.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:25.931Z,1509679945.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:26.317Z,1509679946.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:29.432Z,1509679949.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:29.627Z,1509679949.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:30.019Z,1509679950.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:30.422Z,1509679950.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:30.800Z,1509679950.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:31.201Z,1509679951.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:31.606Z,1509679951.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:32.011Z,1509679952.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:32.402Z,1509679952.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:32.794Z,1509679952.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:33.195Z,1509679953.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:33.599Z,1509679953.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:33.995Z,1509679953.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:34.400Z,1509679954.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:34.807Z,1509679954.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:35.203Z,1509679955.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:35.595Z,1509679955.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:35.999Z,1509679955.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:36.393Z,1509679956.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:36.799Z,1509679956.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:37.203Z,1509679957.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:37.608Z,1509679957.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:38.007Z,1509679958.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:38.410Z,1509679958.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:38.797Z,1509679958.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:39.193Z,1509679959.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:39.595Z,1509679959.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:39.994Z,1509679959.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:40.411Z,1509679960.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:40.855Z,1509679960.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:41.204Z,1509679961.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:41.597Z,1509679961.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:41.999Z,1509679961.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:42.397Z,1509679962.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:42.823Z,1509679962.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:43.197Z,1509679963.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:43.642Z,1509679963.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:44.015Z,1509679964.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:44.446Z,1509679964.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:44.807Z,1509679964.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:45.198Z,1509679965.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:45.603Z,1509679965.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:45.980Z,1509679965.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:46.411Z,1509679966.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:46.815Z,1509679966.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:47.204Z,1509679967.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:47.605Z,1509679967.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:48.000Z,1509679968.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:48.387Z,1509679968.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:48.785Z,1509679968.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:49.183Z,1509679969.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:49.607Z,1509679969.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:50.007Z,1509679970.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:50.406Z,1509679970.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:50.782Z,1509679970.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:51.182Z,1509679971.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:51.583Z,1509679971.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:51.989Z,1509679971.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:52.411Z,1509679972.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:52.811Z,1509679972.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:53.211Z,1509679973.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:53.582Z,1509679973.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:53.991Z,1509679973.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:54.386Z,1509679974.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:54.783Z,1509679974.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:55.211Z,1509679975.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:55.611Z,1509679975.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:56.031Z,1509679976.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:56.411Z,1509679976.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:56.835Z,1509679976.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:57.182Z,1509679977.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:57.631Z,1509679977.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:57.982Z,1509679977.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:58.431Z,1509679978.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:58.831Z,1509679978.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:59.212Z,1509679979.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:59.587Z,1509679979.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:32:59.983Z,1509679979.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:00.384Z,1509679980.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:00.787Z,1509679980.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:01.182Z,1509679981.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:01.612Z,1509679981.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:02.011Z,1509679982.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:02.409Z,1509679982.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:02.782Z,1509679982.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:03.182Z,1509679983.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:03.587Z,1509679983.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:03.990Z,1509679983.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:04.411Z,1509679984.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:04.819Z,1509679984.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:05.218Z,1509679985.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:05.582Z,1509679985.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:05.991Z,1509679985.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:06.390Z,1509679986.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:06.811Z,1509679986.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:07.191Z,1509679987.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:07.619Z,1509679987.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:08.012Z,1509679988.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:08.409Z,1509679988.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:08.783Z,1509679988.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:09.187Z,1509679989.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:09.626Z,1509679989.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:09.987Z,1509679989.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:10.415Z,1509679990.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:10.837Z,1509679990.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:11.219Z,1509679991.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:11.618Z,1509679991.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:11.986Z,1509679991.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:12.426Z,1509679992.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:12.823Z,1509679992.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:13.187Z,1509679993.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:13.614Z,1509679993.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:13.996Z,1509679993.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:14.415Z,1509679994.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:14.790Z,1509679994.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:15.187Z,1509679995.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:15.588Z,1509679995.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:15.990Z,1509679995.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:16.396Z,1509679996.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:16.815Z,1509679996.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:17.216Z,1509679997.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:17.586Z,1509679997.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:17.988Z,1509679997.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:18.392Z,1509679998.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:18.788Z,1509679998.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:19.189Z,1509679999.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:19.616Z,1509679999.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:20.014Z,1509680000.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:20.417Z,1509680000.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:20.787Z,1509680000.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:21.188Z,1509680001.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:21.589Z,1509680001.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:21.988Z,1509680001.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:22.413Z,1509680002.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:22.821Z,1509680002.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:23.235Z,1509680003.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:23.588Z,1509680003.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:23.989Z,1509680003.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:24.391Z,1509680004.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:24.793Z,1509680004.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:25.223Z,1509680005.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:25.599Z,1509680005.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:26.007Z,1509680006.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:26.446Z,1509680006.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:29.483Z,1509680009.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:29.679Z,1509680009.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:30.042Z,1509680010.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:30.484Z,1509680010.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:30.841Z,1509680010.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:31.231Z,1509680011.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:31.639Z,1509680011.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:32.035Z,1509680012.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:32.441Z,1509680012.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:32.844Z,1509680012.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:33.240Z,1509680013.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:33.640Z,1509680013.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:34.032Z,1509680014.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:34.431Z,1509680014.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:34.840Z,1509680014.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:35.244Z,1509680015.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:35.683Z,1509680015.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:36.040Z,1509680016.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:36.435Z,1509680016.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:36.832Z,1509680016.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:37.235Z,1509680017.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:37.640Z,1509680017.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:38.044Z,1509680018.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:38.440Z,1509680018.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:38.832Z,1509680018.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:39.232Z,1509680019.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:39.631Z,1509680019.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:40.032Z,1509680020.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:40.447Z,1509680020.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:40.840Z,1509680020.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:41.291Z,1509680021.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:41.635Z,1509680021.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:42.035Z,1509680022.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:42.455Z,1509680022.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:42.835Z,1509680022.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:43.286Z,1509680023.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:43.679Z,1509680023.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:44.051Z,1509680024.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:44.431Z,1509680024.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:44.832Z,1509680024.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:45.251Z,1509680025.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:45.640Z,1509680025.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:46.044Z,1509680026.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:46.430Z,1509680026.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:46.835Z,1509680026.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:47.244Z,1509680027.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:47.640Z,1509680027.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:48.040Z,1509680028.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:48.432Z,1509680028.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:48.863Z,1509680028.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:49.236Z,1509680029.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:49.647Z,1509680029.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:50.047Z,1509680030.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:50.447Z,1509680030.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:50.842Z,1509680030.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:51.240Z,1509680031.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:51.620Z,1509680031.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:52.019Z,1509680032.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:52.442Z,1509680032.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:52.840Z,1509680032.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:53.246Z,1509680033.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:53.638Z,1509680033.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:54.034Z,1509680034.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:54.451Z,1509680034.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:54.847Z,1509680034.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:54.848Z,1509680034.848 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:54.848Z,1509680034.848 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2017-11-03T03:33:54.849Z,1509680034.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:33:54.850Z,1509680034.850 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:54.851Z,1509680034.851 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2017-11-03T03:33:54.851Z,1509680034.851 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:33:54.929Z,1509680034.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:33:54.929Z,1509680034.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:33:55.259Z,1509680035.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:55.348Z,1509680035.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:33:55.349Z,1509680035.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2017-11-03T03:33:55.349Z,1509680035.349 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:33:55.349Z,1509680035.349 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2017-11-03T03:33:55.649Z,1509680035.649 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:55.650Z,1509680035.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2017-11-03T03:33:55.650Z,1509680035.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:33:55.650Z,1509680035.650 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:33:55.651Z,1509680035.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:33:55.651Z,1509680035.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:33:55.652Z,1509680035.652 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:33:55.652Z,1509680035.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:33:55.652Z,1509680035.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:33:55.741Z,1509680035.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:33:56.160Z,1509680036.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:33:56.160Z,1509680036.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2017-11-03T03:33:56.429Z,1509680036.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:33:56.430Z,1509680036.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:33:56.430Z,1509680036.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:33:56.862Z,1509680036.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:33:56.863Z,1509680036.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:57.238Z,1509680037.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:33:57.239Z,1509680037.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:57.670Z,1509680037.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:33:57.671Z,1509680037.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:58.034Z,1509680038.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:33:58.035Z,1509680038.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:58.434Z,1509680038.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:33:58.435Z,1509680038.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:58.828Z,1509680038.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:33:58.829Z,1509680038.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:59.231Z,1509680039.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:33:59.232Z,1509680039.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:33:59.642Z,1509680039.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:33:59.643Z,1509680039.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:00.034Z,1509680040.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:34:00.035Z,1509680040.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:00.435Z,1509680040.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:34:00.436Z,1509680040.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:00.827Z,1509680040.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:34:00.828Z,1509680040.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:01.227Z,1509680041.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:34:01.229Z,1509680041.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:01.632Z,1509680041.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:34:01.633Z,1509680041.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:02.030Z,1509680042.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:34:02.031Z,1509680042.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:02.435Z,1509680042.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:34:02.436Z,1509680042.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:02.835Z,1509680042.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:34:02.837Z,1509680042.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:03.235Z,1509680043.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:34:03.237Z,1509680043.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:03.638Z,1509680043.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:34:03.639Z,1509680043.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:04.029Z,1509680044.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:34:04.030Z,1509680044.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:04.432Z,1509680044.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:34:04.433Z,1509680044.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:04.828Z,1509680044.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:34:04.829Z,1509680044.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:05.237Z,1509680045.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:34:05.238Z,1509680045.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:05.643Z,1509680045.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:34:05.644Z,1509680045.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:06.035Z,1509680046.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:34:06.036Z,1509680046.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:06.432Z,1509680046.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:34:06.433Z,1509680046.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:06.828Z,1509680046.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:34:06.829Z,1509680046.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:07.235Z,1509680047.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T03:34:07.237Z,1509680047.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:07.637Z,1509680047.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:34:07.638Z,1509680047.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:08.093Z,1509680048.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:34:08.094Z,1509680048.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:08.434Z,1509680048.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:34:08.435Z,1509680048.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:08.829Z,1509680048.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:34:08.830Z,1509680048.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:09.282Z,1509680049.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T03:34:09.283Z,1509680049.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:09.640Z,1509680049.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T03:34:09.641Z,1509680049.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:10.074Z,1509680050.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:34:10.075Z,1509680050.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:10.436Z,1509680050.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:34:10.437Z,1509680050.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:10.866Z,1509680050.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:34:10.866Z,1509680050.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:11.267Z,1509680051.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:34:11.268Z,1509680051.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:11.632Z,1509680051.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:34:11.633Z,1509680051.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:12.030Z,1509680052.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:34:12.031Z,1509680052.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:12.439Z,1509680052.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:34:12.440Z,1509680052.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:12.840Z,1509680052.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:34:12.841Z,1509680052.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:13.238Z,1509680053.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T03:34:13.239Z,1509680053.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:13.627Z,1509680053.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:34:13.628Z,1509680053.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:14.026Z,1509680054.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:34:14.027Z,1509680054.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:14.427Z,1509680054.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T03:34:14.428Z,1509680054.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:14.827Z,1509680054.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:34:14.828Z,1509680054.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:15.235Z,1509680055.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:34:15.237Z,1509680055.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:15.642Z,1509680055.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T03:34:15.643Z,1509680055.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:16.039Z,1509680056.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:16.425Z,1509680056.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:16.828Z,1509680056.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:17.230Z,1509680057.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:17.647Z,1509680057.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:18.043Z,1509680058.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:18.436Z,1509680058.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:18.835Z,1509680058.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:19.227Z,1509680059.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:19.631Z,1509680059.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:20.035Z,1509680060.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:20.439Z,1509680060.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:20.839Z,1509680060.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:21.239Z,1509680061.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:21.651Z,1509680061.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:22.030Z,1509680062.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:22.435Z,1509680062.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:22.835Z,1509680062.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:23.287Z,1509680063.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:23.636Z,1509680063.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:24.040Z,1509680064.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:24.455Z,1509680064.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:24.833Z,1509680064.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:25.278Z,1509680065.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:25.672Z,1509680065.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:26.036Z,1509680066.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:26.432Z,1509680066.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:29.529Z,1509680069.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:29.706Z,1509680069.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:30.087Z,1509680070.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:30.494Z,1509680070.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:30.879Z,1509680070.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:31.284Z,1509680071.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:31.687Z,1509680071.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:32.063Z,1509680072.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:32.487Z,1509680072.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:32.891Z,1509680072.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:33.287Z,1509680073.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:33.663Z,1509680073.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:34.063Z,1509680074.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:34.464Z,1509680074.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:34.863Z,1509680074.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:35.294Z,1509680075.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:35.686Z,1509680075.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:36.087Z,1509680076.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:36.515Z,1509680076.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:36.866Z,1509680076.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:37.289Z,1509680077.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:37.719Z,1509680077.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:38.090Z,1509680078.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:38.467Z,1509680078.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:38.903Z,1509680078.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:39.289Z,1509680079.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:39.719Z,1509680079.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:40.134Z,1509680080.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:40.468Z,1509680080.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:40.871Z,1509680080.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:41.296Z,1509680081.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:41.693Z,1509680081.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:42.089Z,1509680082.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:42.468Z,1509680082.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:42.868Z,1509680082.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:43.293Z,1509680083.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:43.679Z,1509680083.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:44.072Z,1509680084.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:44.469Z,1509680084.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:44.867Z,1509680084.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:45.273Z,1509680085.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:45.697Z,1509680085.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:46.076Z,1509680086.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:46.473Z,1509680086.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:46.873Z,1509680086.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:47.273Z,1509680087.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:47.678Z,1509680087.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:48.078Z,1509680088.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:48.471Z,1509680088.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:48.872Z,1509680088.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:49.279Z,1509680089.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:49.677Z,1509680089.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:50.078Z,1509680090.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:50.519Z,1509680090.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:50.871Z,1509680090.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:51.281Z,1509680091.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:51.679Z,1509680091.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:52.083Z,1509680092.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:52.519Z,1509680092.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:52.871Z,1509680092.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:53.321Z,1509680093.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:53.679Z,1509680093.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:54.120Z,1509680094.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:54.514Z,1509680094.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:54.870Z,1509680094.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:55.283Z,1509680095.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:55.679Z,1509680095.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:56.086Z,1509680096.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:56.472Z,1509680096.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:56.870Z,1509680096.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:57.279Z,1509680097.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:57.686Z,1509680097.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:58.079Z,1509680098.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:58.468Z,1509680098.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:58.871Z,1509680098.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:59.281Z,1509680099.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:34:59.683Z,1509680099.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:00.083Z,1509680100.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:00.472Z,1509680100.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:00.867Z,1509680100.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:01.283Z,1509680101.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:01.678Z,1509680101.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:02.083Z,1509680102.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:02.475Z,1509680102.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:02.871Z,1509680102.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:03.281Z,1509680103.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:03.683Z,1509680103.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:04.082Z,1509680104.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:04.479Z,1509680104.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:04.871Z,1509680104.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:05.330Z,1509680105.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:05.682Z,1509680105.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:06.083Z,1509680106.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:06.530Z,1509680106.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:06.867Z,1509680106.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:07.283Z,1509680107.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:07.719Z,1509680107.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:08.080Z,1509680108.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:08.514Z,1509680108.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:08.907Z,1509680108.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:09.280Z,1509680109.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:09.683Z,1509680109.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:10.080Z,1509680110.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:10.474Z,1509680110.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:10.871Z,1509680110.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:11.281Z,1509680111.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:11.683Z,1509680111.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:12.086Z,1509680112.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:12.473Z,1509680112.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:12.874Z,1509680112.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:13.283Z,1509680113.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:13.682Z,1509680113.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:14.086Z,1509680114.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:14.472Z,1509680114.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:14.875Z,1509680114.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:15.282Z,1509680115.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:15.687Z,1509680115.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:16.084Z,1509680116.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:16.479Z,1509680116.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:16.871Z,1509680116.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:17.283Z,1509680117.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:17.683Z,1509680117.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:18.109Z,1509680118.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:18.474Z,1509680118.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:18.875Z,1509680118.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:19.334Z,1509680119.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:19.684Z,1509680119.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:20.086Z,1509680120.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:20.473Z,1509680120.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:20.875Z,1509680120.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:21.334Z,1509680121.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:21.688Z,1509680121.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:22.123Z,1509680122.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:22.476Z,1509680122.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:22.912Z,1509680122.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:23.322Z,1509680123.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:23.681Z,1509680123.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:24.091Z,1509680124.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:24.477Z,1509680124.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:24.874Z,1509680124.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:25.285Z,1509680125.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:25.682Z,1509680125.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:26.082Z,1509680126.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:26.478Z,1509680126.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:29.565Z,1509680129.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:29.739Z,1509680129.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:30.158Z,1509680130.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:30.534Z,1509680130.534 [PNI_TCM](ERROR): CRC does not match. Expected:0x47564 got:0x1857
2017-11-03T03:35:30.570Z,1509680130.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:30.921Z,1509680130.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:31.326Z,1509680131.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:31.747Z,1509680131.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:32.114Z,1509680132.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x4990 got:0x1857
2017-11-03T03:35:32.146Z,1509680132.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:32.533Z,1509680132.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:32.939Z,1509680132.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:33.361Z,1509680133.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:33.724Z,1509680133.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:34.144Z,1509680134.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:34.521Z,1509680134.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:34.951Z,1509680134.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:35.336Z,1509680135.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:35.735Z,1509680135.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:36.173Z,1509680136.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:36.527Z,1509680136.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:36.946Z,1509680136.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:37.368Z,1509680137.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:37.726Z,1509680137.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:38.134Z,1509680138.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:38.532Z,1509680138.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:38.938Z,1509680138.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:39.333Z,1509680139.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:39.730Z,1509680139.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:40.118Z,1509680140.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:40.507Z,1509680140.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:40.927Z,1509680140.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:41.333Z,1509680141.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:41.732Z,1509680141.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:42.135Z,1509680142.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:42.535Z,1509680142.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:42.930Z,1509680142.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:43.329Z,1509680143.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:43.707Z,1509680143.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:44.129Z,1509680144.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:44.540Z,1509680144.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:44.936Z,1509680144.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:45.332Z,1509680145.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:45.730Z,1509680145.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:46.131Z,1509680146.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:46.512Z,1509680146.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:46.910Z,1509680146.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:47.331Z,1509680147.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:47.731Z,1509680147.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:48.135Z,1509680148.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:48.562Z,1509680148.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:48.931Z,1509680148.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:49.338Z,1509680149.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:49.752Z,1509680149.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:50.133Z,1509680150.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:50.530Z,1509680150.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:50.959Z,1509680150.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:51.330Z,1509680151.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:51.751Z,1509680151.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:52.133Z,1509680152.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:52.535Z,1509680152.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:52.910Z,1509680152.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:53.331Z,1509680153.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:53.730Z,1509680153.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:54.131Z,1509680154.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:54.529Z,1509680154.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:54.910Z,1509680154.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:55.308Z,1509680155.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:55.733Z,1509680155.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:56.111Z,1509680156.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:56.551Z,1509680156.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:56.947Z,1509680156.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:57.339Z,1509680157.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:57.783Z,1509680157.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:58.111Z,1509680158.111 [PNI_TCM](ERROR): CRC does not match. Expected:0x51767 got:0x60042
2017-11-03T03:35:58.158Z,1509680158.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:58.547Z,1509680158.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:58.940Z,1509680158.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:59.358Z,1509680159.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:35:59.745Z,1509680159.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:00.163Z,1509680160.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:00.554Z,1509680160.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:00.921Z,1509680160.921 [PNI_TCM](ERROR): CRC does not match. Expected:0x3942 got:0x16860
2017-11-03T03:36:00.947Z,1509680160.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:01.318Z,1509680161.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:01.738Z,1509680161.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:02.139Z,1509680162.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:02.551Z,1509680162.551 [PNI_TCM](ERROR): CRC does not match. Expected:0x2739 got:0x7106
2017-11-03T03:36:02.607Z,1509680162.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:02.934Z,1509680162.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:03.337Z,1509680163.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:03.781Z,1509680163.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:04.227Z,1509680164.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:04.546Z,1509680164.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:04.966Z,1509680164.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:05.374Z,1509680165.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:05.775Z,1509680165.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:06.174Z,1509680166.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:06.540Z,1509680166.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:06.959Z,1509680166.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:07.347Z,1509680167.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:07.747Z,1509680167.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:08.121Z,1509680168.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:08.533Z,1509680168.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:08.932Z,1509680168.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:09.335Z,1509680169.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:09.729Z,1509680169.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:10.138Z,1509680170.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:10.515Z,1509680170.515 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-11-03T03:36:10.542Z,1509680170.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:10.924Z,1509680170.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:11.325Z,1509680171.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:11.761Z,1509680171.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:12.123Z,1509680172.123 [PNI_TCM](ERROR): CRC does not match. Expected:0x46355 got:0x27
2017-11-03T03:36:12.166Z,1509680172.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:12.529Z,1509680172.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:12.921Z,1509680172.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:13.334Z,1509680173.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:13.725Z,1509680173.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:14.121Z,1509680174.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:14.535Z,1509680174.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:14.961Z,1509680174.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:15.323Z,1509680175.323 [PNI_TCM](ERROR): CRC does not match. Expected:0x64737 got:0x16861
2017-11-03T03:36:15.364Z,1509680175.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:15.733Z,1509680175.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:16.130Z,1509680176.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:16.539Z,1509680176.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:16.923Z,1509680176.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:17.338Z,1509680177.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:17.733Z,1509680177.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:18.178Z,1509680178.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:18.515Z,1509680178.515 [PNI_TCM](ERROR): CRC does not match. Expected:0x9668 got:0x16861
2017-11-03T03:36:18.581Z,1509680178.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:18.923Z,1509680178.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:19.351Z,1509680179.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:19.722Z,1509680179.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:20.164Z,1509680180.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:20.570Z,1509680180.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:20.964Z,1509680180.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:21.347Z,1509680181.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:21.713Z,1509680181.713 [PNI_TCM](ERROR): CRC does not match. Expected:0x41447 got:0x110
2017-11-03T03:36:21.739Z,1509680181.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:22.121Z,1509680182.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:22.521Z,1509680182.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:22.921Z,1509680182.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:23.330Z,1509680183.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:23.731Z,1509680183.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:24.132Z,1509680184.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:24.542Z,1509680184.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:24.914Z,1509680184.914 [PNI_TCM](ERROR): CRC does not match. Expected:0x25977 got:0x49818
2017-11-03T03:36:24.942Z,1509680184.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:25.325Z,1509680185.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:25.722Z,1509680185.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:26.123Z,1509680186.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:26.533Z,1509680186.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:29.651Z,1509680189.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:29.654Z,1509680189.654 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T03:31:29.4Z
2017-11-03T03:36:29.654Z,1509680189.654 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T03:36:29.654Z,1509680189.654 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T03:36:29.835Z,1509680189.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:30.326Z,1509680190.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:30.627Z,1509680190.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:31.008Z,1509680191.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:31.443Z,1509680191.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:34.583Z,1509680194.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:34.693Z,1509680194.693 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0080.lzma
2017-11-03T03:36:34.758Z,1509680194.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:35.139Z,1509680195.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:35.491Z,1509680195.491 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0080.lzma.bak
2017-11-03T03:36:35.492Z,1509680195.492 [DataOverHttps](INFO): SBD MOMSN=5182608
2017-11-03T03:36:35.623Z,1509680195.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:36.150Z,1509680196.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:36.406Z,1509680196.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:39.459Z,1509680199.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:39.646Z,1509680199.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:40.004Z,1509680200.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:40.406Z,1509680200.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:40.807Z,1509680200.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:41.211Z,1509680201.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:44.344Z,1509680204.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:44.457Z,1509680204.457 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20171103T001125/Express0081.lzma
2017-11-03T03:36:44.541Z,1509680204.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:44.917Z,1509680204.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:45.259Z,1509680205.259 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0081.lzma.bak
2017-11-03T03:36:45.259Z,1509680205.259 [DataOverHttps](INFO): SBD MOMSN=5182610
2017-11-03T03:36:45.343Z,1509680205.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:45.917Z,1509680205.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:45.921Z,1509680205.921 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T03:36:45.921Z,1509680205.921 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T03:36:45.921Z,1509680205.921 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T03:36:46.123Z,1509680206.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:49.212Z,1509680209.212 [PNI_TCM](ERROR): CRC does not match. Expected:0x17704 got:0x56576
2017-11-03T03:36:49.212Z,1509680209.212 [PNI_TCM](ERROR): CRC does not match. Expected:0x28996 got:0x56512
2017-11-03T03:36:49.213Z,1509680209.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x12413 got:0x56768
2017-11-03T03:36:49.213Z,1509680209.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x32158 got:0x56512
2017-11-03T03:36:49.213Z,1509680209.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x58883 got:0x56384
2017-11-03T03:36:49.214Z,1509680209.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x17912 got:0x56512
2017-11-03T03:36:49.214Z,1509680209.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x2613 got:0x56576
2017-11-03T03:36:49.279Z,1509680209.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:49.459Z,1509680209.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:49.864Z,1509680209.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:50.250Z,1509680210.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:50.629Z,1509680210.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:51.030Z,1509680211.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:51.524Z,1509680211.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:51.850Z,1509680211.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:52.279Z,1509680212.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:52.628Z,1509680212.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:53.071Z,1509680213.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:53.429Z,1509680213.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:53.863Z,1509680213.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:54.251Z,1509680214.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:54.652Z,1509680214.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:55.055Z,1509680215.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:55.432Z,1509680215.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:55.828Z,1509680215.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:55.830Z,1509680215.830 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:55.830Z,1509680215.830 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2017-11-03T03:36:55.830Z,1509680215.830 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:36:55.832Z,1509680215.832 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:55.832Z,1509680215.832 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2017-11-03T03:36:55.832Z,1509680215.832 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:36:55.952Z,1509680215.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:36:55.953Z,1509680215.953 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:36:56.256Z,1509680216.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:56.341Z,1509680216.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:36:56.341Z,1509680216.341 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2017-11-03T03:36:56.342Z,1509680216.342 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:36:56.342Z,1509680216.342 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2017-11-03T03:36:56.656Z,1509680216.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:56.656Z,1509680216.656 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2017-11-03T03:36:56.656Z,1509680216.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:36:56.658Z,1509680216.658 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:36:56.658Z,1509680216.658 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:36:56.659Z,1509680216.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:36:56.659Z,1509680216.659 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:36:56.659Z,1509680216.659 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:36:56.660Z,1509680216.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:36:56.737Z,1509680216.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:36:57.147Z,1509680217.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:36:57.147Z,1509680217.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2017-11-03T03:36:57.431Z,1509680217.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:36:57.431Z,1509680217.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:36:57.432Z,1509680217.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:36:57.838Z,1509680217.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:36:57.839Z,1509680217.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:58.259Z,1509680218.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:36:58.260Z,1509680218.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:58.660Z,1509680218.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:36:58.661Z,1509680218.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:59.059Z,1509680219.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:36:59.059Z,1509680219.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:59.432Z,1509680219.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:36:59.433Z,1509680219.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:36:59.830Z,1509680219.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:36:59.831Z,1509680219.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:00.237Z,1509680220.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:37:00.238Z,1509680220.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:00.660Z,1509680220.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:37:00.665Z,1509680220.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:01.044Z,1509680221.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:37:01.065Z,1509680221.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:01.431Z,1509680221.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:37:01.432Z,1509680221.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:01.834Z,1509680221.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:37:01.835Z,1509680221.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:02.263Z,1509680222.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:37:02.264Z,1509680222.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:02.663Z,1509680222.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:37:02.664Z,1509680222.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:03.044Z,1509680223.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:37:03.061Z,1509680223.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:03.476Z,1509680223.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:37:03.477Z,1509680223.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:03.838Z,1509680223.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:37:03.839Z,1509680223.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:04.240Z,1509680224.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:37:04.241Z,1509680224.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:04.646Z,1509680224.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:37:04.647Z,1509680224.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:05.042Z,1509680225.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:37:05.043Z,1509680225.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:05.486Z,1509680225.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:37:05.486Z,1509680225.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:05.888Z,1509680225.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:37:05.889Z,1509680225.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:06.240Z,1509680226.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:37:06.241Z,1509680226.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:06.670Z,1509680226.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:37:06.671Z,1509680226.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:07.043Z,1509680227.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:37:07.044Z,1509680227.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:07.470Z,1509680227.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:37:07.471Z,1509680227.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:07.869Z,1509680227.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:37:07.870Z,1509680227.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:08.246Z,1509680228.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T03:37:08.247Z,1509680228.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:08.640Z,1509680228.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:37:08.641Z,1509680228.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:09.039Z,1509680229.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:37:09.041Z,1509680229.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:09.437Z,1509680229.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:37:09.438Z,1509680229.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:09.837Z,1509680229.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:37:09.838Z,1509680229.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:10.240Z,1509680230.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T03:37:10.241Z,1509680230.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:10.643Z,1509680230.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T03:37:10.644Z,1509680230.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:11.040Z,1509680231.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:37:11.041Z,1509680231.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:11.442Z,1509680231.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:37:11.443Z,1509680231.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:11.836Z,1509680231.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:37:11.837Z,1509680231.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:12.240Z,1509680232.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:37:12.241Z,1509680232.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:12.647Z,1509680232.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:37:12.648Z,1509680232.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:13.051Z,1509680233.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:37:13.052Z,1509680233.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:13.439Z,1509680233.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:37:13.440Z,1509680233.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:13.843Z,1509680233.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:37:13.845Z,1509680233.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:14.248Z,1509680234.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T03:37:14.249Z,1509680234.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:14.651Z,1509680234.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:37:14.653Z,1509680234.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:15.046Z,1509680235.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:37:15.047Z,1509680235.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:15.446Z,1509680235.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T03:37:15.447Z,1509680235.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:15.842Z,1509680235.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:37:15.843Z,1509680235.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:16.248Z,1509680236.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:37:16.249Z,1509680236.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:16.654Z,1509680236.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T03:37:16.655Z,1509680236.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:17.055Z,1509680237.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:17.439Z,1509680237.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:17.843Z,1509680237.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:18.254Z,1509680238.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:18.655Z,1509680238.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:19.054Z,1509680239.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:19.445Z,1509680239.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:19.867Z,1509680239.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:20.271Z,1509680240.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:20.651Z,1509680240.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:21.048Z,1509680241.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:21.451Z,1509680241.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:21.964Z,1509680241.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:22.291Z,1509680242.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:22.689Z,1509680242.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:23.048Z,1509680243.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:23.444Z,1509680243.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:23.845Z,1509680243.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:24.248Z,1509680244.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:24.649Z,1509680244.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:25.054Z,1509680245.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:25.444Z,1509680245.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:25.848Z,1509680245.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:26.254Z,1509680246.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:26.659Z,1509680246.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:27.054Z,1509680247.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:27.428Z,1509680247.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:27.847Z,1509680247.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:28.251Z,1509680248.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:28.652Z,1509680248.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:29.059Z,1509680249.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:29.425Z,1509680249.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:29.854Z,1509680249.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:30.263Z,1509680250.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:30.651Z,1509680250.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:31.053Z,1509680251.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:31.429Z,1509680251.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:31.828Z,1509680251.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:32.252Z,1509680252.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:32.656Z,1509680252.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:33.051Z,1509680253.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:33.448Z,1509680253.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:33.830Z,1509680253.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:34.255Z,1509680254.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:34.715Z,1509680254.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:35.051Z,1509680255.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:35.463Z,1509680255.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:35.827Z,1509680255.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:36.278Z,1509680256.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:36.675Z,1509680256.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:37.056Z,1509680257.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:37.428Z,1509680257.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:37.831Z,1509680257.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:38.257Z,1509680258.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:38.657Z,1509680258.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:39.057Z,1509680259.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:39.430Z,1509680259.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:39.827Z,1509680259.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:40.254Z,1509680260.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:40.658Z,1509680260.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:41.055Z,1509680261.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:41.428Z,1509680261.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:41.826Z,1509680261.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:42.255Z,1509680262.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:42.655Z,1509680262.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:43.057Z,1509680263.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:43.427Z,1509680263.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:43.856Z,1509680263.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:44.256Z,1509680264.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:44.655Z,1509680264.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:45.055Z,1509680265.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:45.427Z,1509680265.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:45.831Z,1509680265.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:46.256Z,1509680266.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:46.655Z,1509680266.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:49.807Z,1509680269.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:49.972Z,1509680269.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:50.403Z,1509680270.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:50.764Z,1509680270.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:51.187Z,1509680271.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:51.603Z,1509680271.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:51.972Z,1509680271.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:52.375Z,1509680272.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:52.757Z,1509680272.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:53.163Z,1509680273.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:53.563Z,1509680273.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:53.957Z,1509680273.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:54.375Z,1509680274.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:54.775Z,1509680274.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:55.164Z,1509680275.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:55.557Z,1509680275.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:55.959Z,1509680275.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:56.357Z,1509680276.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:56.754Z,1509680276.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:57.157Z,1509680277.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:57.572Z,1509680277.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:57.971Z,1509680277.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:58.364Z,1509680278.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:58.445Z,1509680278.445 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:37:58.445Z,1509680278.445 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T03:37:58.453Z,1509680278.453 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:37:58.454Z,1509680278.454 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:37:58.454Z,1509680278.454 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:37:58.454Z,1509680278.454 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:37:58.756Z,1509680278.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:59.167Z,1509680279.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:59.557Z,1509680279.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:37:59.956Z,1509680279.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:00.375Z,1509680280.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:00.768Z,1509680280.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:01.177Z,1509680281.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:01.567Z,1509680281.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:01.956Z,1509680281.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:02.360Z,1509680282.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:02.580Z,1509680282.580 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:38:02.640Z,1509680282.640 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:38:02.641Z,1509680282.641 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:38:02.642Z,1509680282.642 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:38:02.643Z,1509680282.643 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:38:02.780Z,1509680282.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:03.148Z,1509680283.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:03.595Z,1509680283.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:04.003Z,1509680284.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:04.373Z,1509680284.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:04.795Z,1509680284.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:05.151Z,1509680285.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:05.595Z,1509680285.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:05.995Z,1509680285.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:06.373Z,1509680286.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:06.780Z,1509680286.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:07.176Z,1509680287.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:07.574Z,1509680287.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:07.947Z,1509680287.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:08.347Z,1509680288.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:08.748Z,1509680288.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:09.173Z,1509680289.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:09.677Z,1509680289.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:09.971Z,1509680289.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:10.371Z,1509680290.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:10.748Z,1509680290.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:11.143Z,1509680291.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:11.548Z,1509680291.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:11.962Z,1509680291.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:12.381Z,1509680292.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:12.782Z,1509680292.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:13.160Z,1509680293.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:13.555Z,1509680293.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:13.954Z,1509680293.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:14.363Z,1509680294.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:14.751Z,1509680294.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:15.152Z,1509680295.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:15.561Z,1509680295.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:15.957Z,1509680295.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:16.360Z,1509680296.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:16.755Z,1509680296.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:17.153Z,1509680297.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:17.555Z,1509680297.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:17.955Z,1509680297.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:18.418Z,1509680298.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:18.763Z,1509680298.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:19.195Z,1509680299.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:19.563Z,1509680299.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:19.994Z,1509680299.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:20.395Z,1509680300.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:20.755Z,1509680300.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:21.157Z,1509680301.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:21.565Z,1509680301.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:21.964Z,1509680301.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:22.371Z,1509680302.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:22.760Z,1509680302.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:23.163Z,1509680303.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:23.568Z,1509680303.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:23.958Z,1509680303.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:24.371Z,1509680304.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:24.771Z,1509680304.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:25.172Z,1509680305.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:25.586Z,1509680305.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:25.963Z,1509680305.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:26.359Z,1509680306.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:26.756Z,1509680306.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:27.156Z,1509680307.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:27.607Z,1509680307.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:27.970Z,1509680307.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:28.387Z,1509680308.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:28.768Z,1509680308.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:29.164Z,1509680309.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:29.564Z,1509680309.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:29.966Z,1509680309.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:30.368Z,1509680310.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:30.812Z,1509680310.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:31.183Z,1509680311.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:31.565Z,1509680311.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:31.963Z,1509680311.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:32.371Z,1509680312.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:32.799Z,1509680312.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:33.170Z,1509680313.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:33.591Z,1509680313.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:33.970Z,1509680313.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:34.402Z,1509680314.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:34.787Z,1509680314.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:35.173Z,1509680315.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:35.551Z,1509680315.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:35.953Z,1509680315.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:36.375Z,1509680316.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:36.773Z,1509680316.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:37.174Z,1509680317.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:37.559Z,1509680317.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:37.954Z,1509680317.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:38.354Z,1509680318.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:38.759Z,1509680318.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:39.159Z,1509680319.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:39.606Z,1509680319.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:39.961Z,1509680319.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:40.381Z,1509680320.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:40.754Z,1509680320.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:41.163Z,1509680321.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:41.601Z,1509680321.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:41.959Z,1509680321.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:42.381Z,1509680322.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:42.763Z,1509680322.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:43.162Z,1509680323.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:43.554Z,1509680323.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:43.953Z,1509680323.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:44.354Z,1509680324.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:44.755Z,1509680324.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:45.152Z,1509680325.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:45.560Z,1509680325.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:45.987Z,1509680325.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:46.384Z,1509680326.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:46.779Z,1509680326.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:50.006Z,1509680330.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:50.148Z,1509680330.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:50.557Z,1509680330.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:50.990Z,1509680330.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:51.353Z,1509680331.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:51.767Z,1509680331.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:52.171Z,1509680332.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:52.542Z,1509680332.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:52.942Z,1509680332.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:53.359Z,1509680333.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:53.753Z,1509680333.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:54.163Z,1509680334.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:54.547Z,1509680334.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:54.954Z,1509680334.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:55.342Z,1509680335.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:55.752Z,1509680335.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:56.147Z,1509680336.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:56.551Z,1509680336.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:57.060Z,1509680337.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:57.345Z,1509680337.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:57.739Z,1509680337.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:58.142Z,1509680338.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:58.547Z,1509680338.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:59.022Z,1509680339.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:59.345Z,1509680339.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:38:59.751Z,1509680339.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:00.152Z,1509680340.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:00.539Z,1509680340.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:00.969Z,1509680340.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:01.343Z,1509680341.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:01.745Z,1509680341.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:02.139Z,1509680342.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:02.558Z,1509680342.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:02.959Z,1509680342.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:03.360Z,1509680343.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:03.744Z,1509680343.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:04.218Z,1509680344.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:04.552Z,1509680344.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:04.967Z,1509680344.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:05.358Z,1509680345.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:05.799Z,1509680345.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:06.179Z,1509680346.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:06.552Z,1509680346.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:06.932Z,1509680346.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:07.331Z,1509680347.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:07.756Z,1509680347.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:08.148Z,1509680348.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:08.560Z,1509680348.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:08.954Z,1509680348.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:09.363Z,1509680349.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:09.747Z,1509680349.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:10.140Z,1509680350.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:10.540Z,1509680350.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:11.026Z,1509680351.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:11.363Z,1509680351.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:11.755Z,1509680351.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:12.153Z,1509680352.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:12.542Z,1509680352.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:13.014Z,1509680353.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:13.350Z,1509680353.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:13.751Z,1509680353.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:14.145Z,1509680354.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:14.557Z,1509680354.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:15.010Z,1509680355.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:15.353Z,1509680355.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:15.747Z,1509680355.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:16.146Z,1509680356.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:16.544Z,1509680356.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:16.947Z,1509680356.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:17.366Z,1509680357.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:17.756Z,1509680357.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:18.236Z,1509680358.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:18.559Z,1509680358.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:18.979Z,1509680358.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:19.367Z,1509680359.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:19.763Z,1509680359.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:20.179Z,1509680360.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:20.567Z,1509680360.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:20.963Z,1509680360.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:21.360Z,1509680361.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:21.762Z,1509680361.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:22.139Z,1509680362.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:22.560Z,1509680362.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:22.933Z,1509680362.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:23.357Z,1509680363.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:23.768Z,1509680363.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:24.163Z,1509680364.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:24.533Z,1509680364.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:25.017Z,1509680365.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:25.333Z,1509680365.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:25.757Z,1509680365.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:26.135Z,1509680366.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:26.563Z,1509680366.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:27.028Z,1509680367.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:27.361Z,1509680367.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:27.735Z,1509680367.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:28.143Z,1509680368.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:28.543Z,1509680368.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:29.028Z,1509680369.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:29.362Z,1509680369.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:29.762Z,1509680369.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:30.167Z,1509680370.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:30.540Z,1509680370.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:30.936Z,1509680370.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:31.342Z,1509680371.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:31.743Z,1509680371.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:32.203Z,1509680372.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:32.553Z,1509680372.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:32.990Z,1509680372.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:33.356Z,1509680373.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:33.786Z,1509680373.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:34.176Z,1509680374.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:34.541Z,1509680374.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:34.950Z,1509680374.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:35.355Z,1509680375.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:35.755Z,1509680375.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:36.162Z,1509680376.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:36.551Z,1509680376.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:36.944Z,1509680376.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:37.346Z,1509680377.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:37.747Z,1509680377.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:38.155Z,1509680378.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:38.549Z,1509680378.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:39.012Z,1509680379.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:39.354Z,1509680379.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:39.759Z,1509680379.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:40.131Z,1509680380.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:40.533Z,1509680380.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:41.023Z,1509680381.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:41.355Z,1509680381.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:41.763Z,1509680381.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:42.159Z,1509680382.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:42.555Z,1509680382.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:42.984Z,1509680382.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:43.339Z,1509680383.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:43.736Z,1509680383.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:44.135Z,1509680384.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:44.566Z,1509680384.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:44.966Z,1509680384.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:45.345Z,1509680385.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:45.771Z,1509680385.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:46.193Z,1509680386.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:46.544Z,1509680386.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:46.975Z,1509680386.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:50.098Z,1509680390.098 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T03:39:50.098Z,1509680390.098 [NAL9602] Data Fault, FailCount= 4
2017-11-03T03:39:50.098Z,1509680390.098 [NAL9602](ERROR): Data Fault
2017-11-03T03:39:50.147Z,1509680390.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:50.252Z,1509680390.252 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T03:39:50.281Z,1509680390.281 [NAL9602](INFO): Powering down
2017-11-03T03:39:50.365Z,1509680390.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:50.735Z,1509680390.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:51.121Z,1509680391.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:51.217Z,1509680391.217 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T03:39:51.217Z,1509680391.217 [NAL9602] No Fault, FailCount= 4
2017-11-03T03:39:51.583Z,1509680391.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:51.904Z,1509680391.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:52.327Z,1509680392.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:52.702Z,1509680392.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:53.102Z,1509680393.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:53.502Z,1509680393.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:53.902Z,1509680393.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:54.301Z,1509680394.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:54.702Z,1509680394.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:55.106Z,1509680395.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:55.502Z,1509680395.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:55.902Z,1509680395.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:56.332Z,1509680396.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:56.701Z,1509680396.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:56.703Z,1509680396.703 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:56.703Z,1509680396.703 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2017-11-03T03:39:56.703Z,1509680396.703 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:39:56.705Z,1509680396.705 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:56.705Z,1509680396.705 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2017-11-03T03:39:56.705Z,1509680396.705 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:39:56.824Z,1509680396.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:39:56.825Z,1509680396.825 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:39:57.110Z,1509680397.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:57.204Z,1509680397.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:39:57.205Z,1509680397.205 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2017-11-03T03:39:57.205Z,1509680397.205 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:39:57.205Z,1509680397.205 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2017-11-03T03:39:57.510Z,1509680397.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:57.510Z,1509680397.510 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2017-11-03T03:39:57.510Z,1509680397.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:39:57.511Z,1509680397.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:39:57.511Z,1509680397.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:39:57.511Z,1509680397.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:39:57.512Z,1509680397.512 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:39:57.512Z,1509680397.512 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:39:57.513Z,1509680397.513 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:39:57.605Z,1509680397.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:39:57.996Z,1509680397.996 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:39:57.996Z,1509680397.996 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2017-11-03T03:39:58.305Z,1509680398.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:39:58.306Z,1509680398.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:39:58.306Z,1509680398.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:39:58.592Z,1509680398.592 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:39:58.592Z,1509680398.592 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T03:39:58.592Z,1509680398.592 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:39:58.714Z,1509680398.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:39:58.715Z,1509680398.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:58.805Z,1509680398.805 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:39:58.997Z,1509680398.997 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:39:59.149Z,1509680399.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:39:59.150Z,1509680399.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:59.250Z,1509680399.250 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:39:59.519Z,1509680399.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:39:59.519Z,1509680399.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:39:59.913Z,1509680399.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:39:59.914Z,1509680399.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:00.310Z,1509680400.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:40:00.311Z,1509680400.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:00.711Z,1509680400.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:40:00.712Z,1509680400.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:00.797Z,1509680400.797 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:40:00.797Z,1509680400.797 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T03:40:00.864Z,1509680400.864 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:40:00.865Z,1509680400.865 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:40:00.865Z,1509680400.865 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:40:00.865Z,1509680400.865 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:40:01.120Z,1509680401.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:40:01.121Z,1509680401.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:01.520Z,1509680401.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:40:01.521Z,1509680401.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:01.923Z,1509680401.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:40:01.924Z,1509680401.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:02.343Z,1509680402.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:40:02.344Z,1509680402.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:02.720Z,1509680402.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:40:02.721Z,1509680402.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:03.139Z,1509680403.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:40:03.141Z,1509680403.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:03.520Z,1509680403.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:40:03.521Z,1509680403.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:03.899Z,1509680403.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:40:03.900Z,1509680403.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:04.338Z,1509680404.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:40:04.339Z,1509680404.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:04.720Z,1509680404.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:40:04.721Z,1509680404.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:04.987Z,1509680404.987 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:40:05.051Z,1509680405.051 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:40:05.052Z,1509680405.052 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:40:05.061Z,1509680405.061 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:40:05.061Z,1509680405.061 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:40:05.180Z,1509680405.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T03:40:05.181Z,1509680405.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:05.565Z,1509680405.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:06.013Z,1509680406.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:06.320Z,1509680406.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:06.716Z,1509680406.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:07.104Z,1509680407.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:07.525Z,1509680407.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:07.921Z,1509680407.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:08.307Z,1509680408.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:08.703Z,1509680408.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:09.128Z,1509680409.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:09.504Z,1509680409.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:09.903Z,1509680409.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:10.308Z,1509680410.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:10.700Z,1509680410.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:11.139Z,1509680411.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:11.509Z,1509680411.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:11.908Z,1509680411.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:12.308Z,1509680412.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:12.708Z,1509680412.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:13.113Z,1509680413.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:13.509Z,1509680413.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:13.908Z,1509680413.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:14.308Z,1509680414.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:14.708Z,1509680414.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:15.136Z,1509680415.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:15.516Z,1509680415.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:15.914Z,1509680415.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:16.309Z,1509680416.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:16.708Z,1509680416.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:17.139Z,1509680417.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:17.562Z,1509680417.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:17.927Z,1509680417.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:18.314Z,1509680418.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:18.710Z,1509680418.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:19.159Z,1509680419.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:19.519Z,1509680419.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:19.947Z,1509680419.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:20.331Z,1509680420.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:20.672Z,1509680420.672 [NAL9602](INFO): Powering up NAL9602
2017-11-03T03:40:20.722Z,1509680420.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:21.099Z,1509680421.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:21.590Z,1509680421.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:21.903Z,1509680421.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:22.303Z,1509680422.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:22.698Z,1509680422.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:23.102Z,1509680423.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:23.586Z,1509680423.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:23.902Z,1509680423.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:24.303Z,1509680424.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:24.702Z,1509680424.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:25.101Z,1509680425.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:25.529Z,1509680425.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:25.902Z,1509680425.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:26.301Z,1509680426.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:26.703Z,1509680426.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:27.127Z,1509680427.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:27.503Z,1509680427.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:27.903Z,1509680427.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:28.302Z,1509680428.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:28.702Z,1509680428.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:29.125Z,1509680429.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:29.525Z,1509680429.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:29.928Z,1509680429.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:30.304Z,1509680430.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:30.702Z,1509680430.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:31.135Z,1509680431.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:31.525Z,1509680431.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:31.871Z,1509680431.871 [NAL9602](INFO): NAL9602 initialized
2017-11-03T03:40:31.903Z,1509680431.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:32.346Z,1509680432.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:32.750Z,1509680432.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:33.125Z,1509680433.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:33.539Z,1509680433.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:33.943Z,1509680433.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:34.315Z,1509680434.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:34.739Z,1509680434.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:35.143Z,1509680435.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:35.590Z,1509680435.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:35.916Z,1509680435.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:36.339Z,1509680436.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:36.711Z,1509680436.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:37.110Z,1509680437.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:37.586Z,1509680437.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:37.913Z,1509680437.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:38.315Z,1509680438.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:38.717Z,1509680438.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:39.119Z,1509680439.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:39.519Z,1509680439.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:39.909Z,1509680439.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:40.307Z,1509680440.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:40.711Z,1509680440.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:41.115Z,1509680441.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:41.515Z,1509680441.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:41.918Z,1509680441.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:42.321Z,1509680442.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:42.707Z,1509680442.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:43.119Z,1509680443.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:43.513Z,1509680443.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:43.913Z,1509680443.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:44.316Z,1509680444.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:44.721Z,1509680444.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:45.119Z,1509680445.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:45.511Z,1509680445.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:45.913Z,1509680445.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:46.319Z,1509680446.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:46.713Z,1509680446.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:47.220Z,1509680447.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:50.315Z,1509680450.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:50.514Z,1509680450.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:50.935Z,1509680450.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:51.295Z,1509680451.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:51.715Z,1509680451.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:52.115Z,1509680452.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:52.501Z,1509680452.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:52.901Z,1509680452.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:53.319Z,1509680453.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:53.697Z,1509680453.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:54.101Z,1509680454.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:54.495Z,1509680454.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:54.875Z,1509680454.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:55.291Z,1509680455.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:55.701Z,1509680455.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:56.165Z,1509680456.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:56.525Z,1509680456.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:56.894Z,1509680456.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:57.310Z,1509680457.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:57.714Z,1509680457.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:58.119Z,1509680458.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:58.527Z,1509680458.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:58.929Z,1509680458.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:59.323Z,1509680459.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:40:59.714Z,1509680459.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:00.126Z,1509680460.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:00.483Z,1509680460.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:00.898Z,1509680460.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:01.336Z,1509680461.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:01.735Z,1509680461.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:02.134Z,1509680462.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:02.499Z,1509680462.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:02.895Z,1509680462.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:03.334Z,1509680463.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:03.738Z,1509680463.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:04.183Z,1509680464.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:04.530Z,1509680464.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:04.917Z,1509680464.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:05.321Z,1509680465.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:05.730Z,1509680465.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:06.157Z,1509680466.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:06.508Z,1509680466.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:06.906Z,1509680466.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:07.267Z,1509680467.267 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:41:07.267Z,1509680467.267 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:41:07.267Z,1509680467.267 [BPC1](ERROR): Communications Fault
2017-11-03T03:41:07.303Z,1509680467.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:07.409Z,1509680467.409 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:41:07.718Z,1509680467.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:08.098Z,1509680468.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:08.504Z,1509680468.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:08.592Z,1509680468.592 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:41:08.592Z,1509680468.592 [BPC1] No Fault, FailCount= 1
2017-11-03T03:41:09.005Z,1509680469.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:09.319Z,1509680469.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:09.698Z,1509680469.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:10.119Z,1509680470.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:10.500Z,1509680470.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:10.875Z,1509680470.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:11.314Z,1509680471.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:11.684Z,1509680471.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:12.105Z,1509680472.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:12.478Z,1509680472.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:12.876Z,1509680472.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:13.313Z,1509680473.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:13.714Z,1509680473.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:14.103Z,1509680474.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:14.481Z,1509680474.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:14.875Z,1509680474.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:15.323Z,1509680475.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:15.709Z,1509680475.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:16.108Z,1509680476.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:16.480Z,1509680476.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:16.888Z,1509680476.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:17.323Z,1509680477.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:17.715Z,1509680477.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:18.125Z,1509680478.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:18.498Z,1509680478.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:18.887Z,1509680478.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:19.291Z,1509680479.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:19.696Z,1509680479.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:20.095Z,1509680480.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:20.486Z,1509680480.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:20.962Z,1509680480.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:21.300Z,1509680481.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:21.698Z,1509680481.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:22.121Z,1509680482.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:22.522Z,1509680482.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:22.888Z,1509680482.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:23.329Z,1509680483.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:23.747Z,1509680483.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:24.107Z,1509680484.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:24.490Z,1509680484.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:24.896Z,1509680484.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:25.303Z,1509680485.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:25.702Z,1509680485.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:26.101Z,1509680486.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:26.477Z,1509680486.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:26.874Z,1509680486.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:27.307Z,1509680487.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:27.702Z,1509680487.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:28.101Z,1509680488.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:28.499Z,1509680488.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:28.875Z,1509680488.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:29.321Z,1509680489.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:29.701Z,1509680489.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:30.143Z,1509680490.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:30.509Z,1509680490.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:30.875Z,1509680490.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:31.275Z,1509680491.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:31.699Z,1509680491.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:32.076Z,1509680492.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:32.501Z,1509680492.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:32.902Z,1509680492.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:33.308Z,1509680493.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:33.705Z,1509680493.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:34.076Z,1509680494.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:34.477Z,1509680494.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:34.963Z,1509680494.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:35.321Z,1509680495.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:35.750Z,1509680495.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:36.122Z,1509680496.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:36.521Z,1509680496.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:36.883Z,1509680496.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:37.335Z,1509680497.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:37.735Z,1509680497.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:38.126Z,1509680498.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:38.483Z,1509680498.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:38.882Z,1509680498.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:39.307Z,1509680499.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:39.719Z,1509680499.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:40.108Z,1509680500.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:40.483Z,1509680500.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:40.888Z,1509680500.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:41.300Z,1509680501.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:41.697Z,1509680501.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:42.098Z,1509680502.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:42.491Z,1509680502.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:42.872Z,1509680502.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:43.321Z,1509680503.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:43.704Z,1509680503.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:44.105Z,1509680504.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:44.193Z,1509680504.193 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T03:41:44.499Z,1509680504.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:44.892Z,1509680504.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:45.319Z,1509680505.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:45.697Z,1509680505.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:46.141Z,1509680506.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:46.145Z,1509680506.145 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T03:41:46.145Z,1509680506.145 [Default:CheckIn:C.Wait] Stopped
2017-11-03T03:41:46.145Z,1509680506.145 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T03:41:46.145Z,1509680506.145 [Default:CheckIn:D] Running Loop=1
2017-11-03T03:41:46.507Z,1509680506.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:46.510Z,1509680506.510 [Default:CheckIn:D] Stopped
2017-11-03T03:41:46.510Z,1509680506.510 [Default:CheckIn:E] Running Loop=1
2017-11-03T03:41:46.876Z,1509680506.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:46.880Z,1509680506.880 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.649072 min 
2017-11-03T03:41:46.880Z,1509680506.880 [Default:CheckIn:E] Stopped
2017-11-03T03:41:46.896Z,1509680506.896 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T03:41:46.896Z,1509680506.897 [Default:CheckIn] Stopped
2017-11-03T03:41:46.897Z,1509680506.897 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T03:41:46.897Z,1509680506.897 [Default:CheckIn](INFO): Running loop #21
2017-11-03T03:41:46.897Z,1509680506.897 [Default:CheckIn] Running Loop=21
2017-11-03T03:41:46.897Z,1509680506.897 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T03:41:46.897Z,1509680506.897 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T03:41:47.294Z,1509680507.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:50.574Z,1509680510.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:50.766Z,1509680510.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:51.131Z,1509680511.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:51.570Z,1509680511.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:51.927Z,1509680511.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:52.362Z,1509680512.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:52.771Z,1509680512.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:53.135Z,1509680513.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:53.539Z,1509680513.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:53.927Z,1509680513.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:54.327Z,1509680514.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:54.731Z,1509680514.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:55.135Z,1509680515.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:55.547Z,1509680515.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:55.939Z,1509680515.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:56.339Z,1509680516.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:56.727Z,1509680516.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:57.131Z,1509680517.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:57.528Z,1509680517.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:57.931Z,1509680517.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:58.335Z,1509680518.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:58.743Z,1509680518.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:59.146Z,1509680519.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:59.587Z,1509680519.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:41:59.927Z,1509680519.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:00.327Z,1509680520.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:00.730Z,1509680520.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:01.127Z,1509680521.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:01.168Z,1509680521.168 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:42:01.168Z,1509680521.168 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T03:42:01.168Z,1509680521.168 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:42:01.232Z,1509680521.232 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:42:01.573Z,1509680521.573 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:42:01.623Z,1509680521.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T03:42:01.624Z,1509680521.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:01.729Z,1509680521.729 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:42:01.946Z,1509680521.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:42:01.947Z,1509680521.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:02.339Z,1509680522.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:42:02.340Z,1509680522.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:02.727Z,1509680522.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:42:02.728Z,1509680522.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:03.131Z,1509680523.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:42:03.131Z,1509680523.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:03.209Z,1509680523.209 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:42:03.209Z,1509680523.209 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T03:42:03.344Z,1509680523.344 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:42:03.345Z,1509680523.345 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:42:03.345Z,1509680523.345 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:42:03.345Z,1509680523.345 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:42:03.527Z,1509680523.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:42:03.528Z,1509680523.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:03.971Z,1509680523.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:42:03.972Z,1509680523.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:04.341Z,1509680524.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:42:04.342Z,1509680524.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:04.792Z,1509680524.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T03:42:04.793Z,1509680524.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:05.140Z,1509680525.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:42:05.141Z,1509680525.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:05.558Z,1509680525.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:42:05.559Z,1509680525.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:05.932Z,1509680525.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:42:05.933Z,1509680525.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:06.374Z,1509680526.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:42:06.375Z,1509680526.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:06.735Z,1509680526.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:42:06.736Z,1509680526.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:07.162Z,1509680527.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:42:07.163Z,1509680527.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:07.468Z,1509680527.468 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:42:07.590Z,1509680527.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T03:42:07.591Z,1509680527.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:07.599Z,1509680527.599 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:42:07.601Z,1509680527.601 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:42:07.601Z,1509680527.601 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:42:07.602Z,1509680527.602 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:42:07.950Z,1509680527.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:42:07.951Z,1509680527.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:08.343Z,1509680528.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:08.735Z,1509680528.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:09.120Z,1509680529.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:09.522Z,1509680529.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:09.945Z,1509680529.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:10.350Z,1509680530.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:10.748Z,1509680530.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:11.148Z,1509680531.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:11.525Z,1509680531.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:11.923Z,1509680531.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:12.319Z,1509680532.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:12.720Z,1509680532.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:13.127Z,1509680533.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:13.548Z,1509680533.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:13.948Z,1509680533.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:14.353Z,1509680534.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:14.731Z,1509680534.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:15.123Z,1509680535.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:15.524Z,1509680535.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:15.924Z,1509680535.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:16.353Z,1509680536.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:16.755Z,1509680536.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:17.152Z,1509680537.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:17.523Z,1509680537.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:17.974Z,1509680537.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:18.328Z,1509680538.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:18.727Z,1509680538.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:19.174Z,1509680539.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:19.540Z,1509680539.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:19.940Z,1509680539.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:20.371Z,1509680540.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:20.727Z,1509680540.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:21.159Z,1509680541.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:21.566Z,1509680541.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:21.926Z,1509680541.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:22.339Z,1509680542.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:22.745Z,1509680542.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:23.136Z,1509680543.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:23.537Z,1509680543.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:23.936Z,1509680543.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:24.336Z,1509680544.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:24.715Z,1509680544.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:25.135Z,1509680545.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:25.547Z,1509680545.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:25.941Z,1509680545.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:26.339Z,1509680546.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:26.719Z,1509680546.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:27.119Z,1509680547.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:27.546Z,1509680547.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:27.922Z,1509680547.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:28.347Z,1509680548.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:28.747Z,1509680548.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:29.132Z,1509680549.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:29.582Z,1509680549.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:29.923Z,1509680549.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:30.331Z,1509680550.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:30.727Z,1509680550.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:31.125Z,1509680551.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:31.575Z,1509680551.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:31.958Z,1509680551.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:32.376Z,1509680552.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:32.727Z,1509680552.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:33.126Z,1509680553.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:33.527Z,1509680553.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:33.966Z,1509680553.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:34.336Z,1509680554.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:34.739Z,1509680554.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:35.182Z,1509680555.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:35.527Z,1509680555.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:35.970Z,1509680555.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:36.370Z,1509680556.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:36.730Z,1509680556.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:37.125Z,1509680557.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:37.539Z,1509680557.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:37.935Z,1509680557.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:38.339Z,1509680558.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:38.726Z,1509680558.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:39.131Z,1509680559.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:39.525Z,1509680559.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:39.926Z,1509680559.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:40.336Z,1509680560.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:40.735Z,1509680560.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:41.139Z,1509680561.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:41.542Z,1509680561.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:41.938Z,1509680561.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:42.330Z,1509680562.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:42.742Z,1509680562.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:43.119Z,1509680563.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:43.597Z,1509680563.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:43.948Z,1509680563.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:44.336Z,1509680564.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:44.730Z,1509680564.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:45.140Z,1509680565.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:45.593Z,1509680565.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:45.920Z,1509680565.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:46.349Z,1509680566.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:46.755Z,1509680566.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:47.152Z,1509680567.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:47.570Z,1509680567.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:50.735Z,1509680570.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:50.914Z,1509680570.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:51.320Z,1509680571.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:51.747Z,1509680571.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:52.116Z,1509680572.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:52.527Z,1509680572.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:52.938Z,1509680572.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:53.319Z,1509680573.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:53.715Z,1509680573.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:54.095Z,1509680574.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:54.519Z,1509680574.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:54.921Z,1509680574.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:55.324Z,1509680575.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:55.714Z,1509680575.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:56.096Z,1509680576.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:56.492Z,1509680576.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:56.895Z,1509680576.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:57.325Z,1509680577.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:57.702Z,1509680577.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:57.704Z,1509680577.704 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:57.704Z,1509680577.704 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2017-11-03T03:42:57.704Z,1509680577.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:42:57.722Z,1509680577.722 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:57.722Z,1509680577.722 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2017-11-03T03:42:57.722Z,1509680577.722 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:42:57.820Z,1509680577.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:42:57.821Z,1509680577.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:42:58.130Z,1509680578.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:58.220Z,1509680578.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:42:58.220Z,1509680578.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2017-11-03T03:42:58.221Z,1509680578.221 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:42:58.221Z,1509680578.221 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2017-11-03T03:42:58.495Z,1509680578.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:42:58.496Z,1509680578.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2017-11-03T03:42:58.496Z,1509680578.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:42:58.497Z,1509680578.497 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:42:58.498Z,1509680578.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:42:58.499Z,1509680578.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:42:58.499Z,1509680578.499 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:42:58.501Z,1509680578.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:42:58.501Z,1509680578.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:42:58.608Z,1509680578.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:42:58.988Z,1509680578.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:42:58.988Z,1509680578.988 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2017-11-03T03:42:59.299Z,1509680579.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:42:59.300Z,1509680579.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:42:59.300Z,1509680579.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:42:59.731Z,1509680579.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:00.103Z,1509680580.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:00.507Z,1509680580.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:00.907Z,1509680580.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:01.330Z,1509680581.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:01.713Z,1509680581.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:02.106Z,1509680582.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:02.517Z,1509680582.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:02.889Z,1509680582.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:03.325Z,1509680583.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:03.767Z,1509680583.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:04.104Z,1509680584.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:04.525Z,1509680584.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:04.897Z,1509680584.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:05.346Z,1509680585.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:05.705Z,1509680585.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:06.118Z,1509680586.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:06.551Z,1509680586.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:06.913Z,1509680586.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:07.346Z,1509680587.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:07.744Z,1509680587.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:08.107Z,1509680588.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:08.505Z,1509680588.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:08.904Z,1509680588.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:09.327Z,1509680589.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:09.735Z,1509680589.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:10.106Z,1509680590.106 [PNI_TCM](ERROR): CRC does not match. Expected:0x51672 got:0x16861
2017-11-03T03:43:10.130Z,1509680590.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:10.514Z,1509680590.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:10.918Z,1509680590.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:11.284Z,1509680591.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:11.712Z,1509680591.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:12.109Z,1509680592.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:12.520Z,1509680592.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:12.943Z,1509680592.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:13.313Z,1509680593.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:13.718Z,1509680593.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:14.122Z,1509680594.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:14.488Z,1509680594.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:14.945Z,1509680594.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:15.321Z,1509680595.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:15.723Z,1509680595.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:16.121Z,1509680596.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:16.496Z,1509680596.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:16.895Z,1509680596.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:17.297Z,1509680597.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:17.705Z,1509680597.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:18.147Z,1509680598.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:18.519Z,1509680598.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:18.993Z,1509680598.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:19.343Z,1509680599.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:19.701Z,1509680599.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:20.138Z,1509680600.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:20.521Z,1509680600.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:20.936Z,1509680600.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:21.325Z,1509680601.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:21.719Z,1509680601.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:22.121Z,1509680602.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:22.488Z,1509680602.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:22.895Z,1509680602.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:23.314Z,1509680603.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:23.721Z,1509680603.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:24.086Z,1509680604.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:24.515Z,1509680604.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:24.915Z,1509680604.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:25.321Z,1509680605.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:25.715Z,1509680605.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:26.096Z,1509680606.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:26.492Z,1509680606.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:26.889Z,1509680606.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:27.322Z,1509680607.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:27.719Z,1509680607.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:28.118Z,1509680608.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:28.522Z,1509680608.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:28.895Z,1509680608.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:29.299Z,1509680609.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:29.699Z,1509680609.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:30.122Z,1509680610.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:30.520Z,1509680610.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:30.975Z,1509680610.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:31.321Z,1509680611.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:31.762Z,1509680611.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:32.095Z,1509680612.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:32.531Z,1509680612.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:32.897Z,1509680612.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:33.346Z,1509680613.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:33.735Z,1509680613.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:34.106Z,1509680614.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:34.502Z,1509680614.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:34.929Z,1509680614.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:35.305Z,1509680615.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:35.704Z,1509680615.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:36.099Z,1509680616.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:36.509Z,1509680616.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:36.917Z,1509680616.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:37.317Z,1509680617.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:37.706Z,1509680617.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:38.121Z,1509680618.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:38.505Z,1509680618.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:38.902Z,1509680618.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:39.315Z,1509680619.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:39.723Z,1509680619.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:40.113Z,1509680620.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:40.507Z,1509680620.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:40.904Z,1509680620.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:41.318Z,1509680621.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:41.709Z,1509680621.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:42.105Z,1509680622.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:42.514Z,1509680622.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:42.990Z,1509680622.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:43.312Z,1509680623.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:43.702Z,1509680623.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:44.111Z,1509680624.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:44.546Z,1509680624.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:44.900Z,1509680624.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:45.335Z,1509680625.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:45.728Z,1509680625.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:46.119Z,1509680626.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:46.519Z,1509680626.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:46.889Z,1509680626.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:47.335Z,1509680627.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:47.740Z,1509680627.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:50.878Z,1509680630.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:51.053Z,1509680631.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:51.449Z,1509680631.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:51.859Z,1509680631.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:52.242Z,1509680632.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:52.640Z,1509680632.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:53.043Z,1509680633.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:53.448Z,1509680633.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:53.849Z,1509680633.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:54.249Z,1509680634.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:54.640Z,1509680634.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:55.042Z,1509680635.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:55.447Z,1509680635.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:55.855Z,1509680635.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:56.259Z,1509680636.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:56.655Z,1509680636.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:57.066Z,1509680637.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:57.413Z,1509680637.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:43:57.428Z,1509680637.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:57.813Z,1509680637.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:43:57.828Z,1509680637.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:58.218Z,1509680638.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:43:58.232Z,1509680638.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:58.625Z,1509680638.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:43:58.699Z,1509680638.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:59.048Z,1509680639.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:43:59.064Z,1509680639.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:59.425Z,1509680639.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:43:59.457Z,1509680639.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:43:59.812Z,1509680639.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:43:59.867Z,1509680639.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:00.218Z,1509680640.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:00.233Z,1509680640.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:00.617Z,1509680640.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:00.632Z,1509680640.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:01.037Z,1509680641.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:01.101Z,1509680641.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:01.430Z,1509680641.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:01.461Z,1509680641.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:01.829Z,1509680641.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:01.871Z,1509680641.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:02.230Z,1509680642.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:02.272Z,1509680642.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:02.617Z,1509680642.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:02.632Z,1509680642.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:03.061Z,1509680643.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:03.101Z,1509680643.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:03.422Z,1509680643.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:03.436Z,1509680643.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:03.822Z,1509680643.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:03.838Z,1509680643.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:03.884Z,1509680643.884 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:44:03.885Z,1509680643.885 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T03:44:03.885Z,1509680643.885 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:44:03.944Z,1509680643.944 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:44:04.222Z,1509680644.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:04.237Z,1509680644.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:44:04.238Z,1509680644.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:04.288Z,1509680644.288 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:44:04.404Z,1509680644.404 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:44:04.627Z,1509680644.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:04.643Z,1509680644.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:44:04.644Z,1509680644.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:05.026Z,1509680645.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:05.043Z,1509680645.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:44:05.044Z,1509680645.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:05.426Z,1509680645.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:05.442Z,1509680645.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:44:05.443Z,1509680645.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:05.820Z,1509680645.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:05.836Z,1509680645.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:44:05.837Z,1509680645.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:05.920Z,1509680645.920 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:44:05.921Z,1509680645.921 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T03:44:06.020Z,1509680646.020 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:44:06.021Z,1509680646.021 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:44:06.021Z,1509680646.021 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:44:06.021Z,1509680646.021 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:44:06.222Z,1509680646.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:06.238Z,1509680646.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:44:06.239Z,1509680646.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:06.622Z,1509680646.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:06.637Z,1509680646.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:44:06.638Z,1509680646.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:07.022Z,1509680647.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:07.037Z,1509680647.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:44:07.038Z,1509680647.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:07.426Z,1509680647.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:07.441Z,1509680647.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:44:07.442Z,1509680647.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:07.829Z,1509680647.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:07.844Z,1509680647.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:44:07.845Z,1509680647.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:08.229Z,1509680648.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:08.243Z,1509680648.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:44:08.245Z,1509680648.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:08.622Z,1509680648.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:08.636Z,1509680648.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:44:08.637Z,1509680648.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:09.021Z,1509680649.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:09.036Z,1509680649.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:44:09.037Z,1509680649.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:09.424Z,1509680649.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:09.438Z,1509680649.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:44:09.439Z,1509680649.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:09.822Z,1509680649.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:09.836Z,1509680649.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:44:09.837Z,1509680649.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:10.144Z,1509680650.144 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:44:10.228Z,1509680650.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:10.266Z,1509680650.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:44:10.267Z,1509680650.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:10.311Z,1509680650.311 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:44:10.312Z,1509680650.312 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:44:10.313Z,1509680650.313 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:44:10.314Z,1509680650.314 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:44:10.650Z,1509680650.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:44:10.651Z,1509680650.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:11.043Z,1509680651.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:11.438Z,1509680651.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:11.825Z,1509680651.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:11.840Z,1509680651.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:12.230Z,1509680652.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:12.245Z,1509680652.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:12.629Z,1509680652.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:12.651Z,1509680652.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:13.029Z,1509680653.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:13.051Z,1509680653.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:13.421Z,1509680653.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:13.489Z,1509680653.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:13.822Z,1509680653.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:13.837Z,1509680653.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:14.217Z,1509680654.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:14.251Z,1509680654.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:14.632Z,1509680654.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:14.651Z,1509680654.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:15.032Z,1509680655.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:15.086Z,1509680655.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:15.432Z,1509680655.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:15.454Z,1509680655.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:15.830Z,1509680655.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:15.886Z,1509680655.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:16.220Z,1509680656.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:16.275Z,1509680656.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:16.623Z,1509680656.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:16.638Z,1509680656.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:17.020Z,1509680657.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:17.035Z,1509680657.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:17.434Z,1509680657.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:17.449Z,1509680657.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:17.832Z,1509680657.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:17.847Z,1509680657.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:18.232Z,1509680658.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:18.247Z,1509680658.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:18.620Z,1509680658.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:18.635Z,1509680658.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:19.028Z,1509680659.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:19.043Z,1509680659.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:19.422Z,1509680659.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:19.437Z,1509680659.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:19.820Z,1509680659.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:19.835Z,1509680659.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:20.233Z,1509680660.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:20.247Z,1509680660.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:20.632Z,1509680660.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:20.651Z,1509680660.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:21.038Z,1509680661.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:21.059Z,1509680661.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:21.418Z,1509680661.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:21.445Z,1509680661.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:21.851Z,1509680661.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:21.883Z,1509680661.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:22.223Z,1509680662.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:22.243Z,1509680662.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:22.681Z,1509680662.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:23.063Z,1509680663.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:23.448Z,1509680663.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:23.839Z,1509680663.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:24.243Z,1509680664.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:24.643Z,1509680664.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:25.057Z,1509680665.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:25.451Z,1509680665.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:25.855Z,1509680665.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:26.238Z,1509680666.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:26.252Z,1509680666.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:26.623Z,1509680666.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:26.638Z,1509680666.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:27.058Z,1509680667.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:27.143Z,1509680667.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:27.440Z,1509680667.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:27.843Z,1509680667.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:28.299Z,1509680668.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:28.630Z,1509680668.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:28.645Z,1509680668.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:29.033Z,1509680669.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:29.048Z,1509680669.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:29.428Z,1509680669.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T03:44:29.443Z,1509680669.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:29.863Z,1509680669.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:30.252Z,1509680670.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:30.686Z,1509680670.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:31.091Z,1509680671.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:31.440Z,1509680671.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:31.831Z,1509680671.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:32.257Z,1509680672.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:32.655Z,1509680672.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:33.055Z,1509680673.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:33.426Z,1509680673.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:33.835Z,1509680673.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:34.235Z,1509680674.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:34.643Z,1509680674.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:35.049Z,1509680675.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:35.443Z,1509680675.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:35.839Z,1509680675.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:36.239Z,1509680676.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:36.637Z,1509680676.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:37.051Z,1509680677.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:37.444Z,1509680677.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:37.843Z,1509680677.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:38.244Z,1509680678.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:38.635Z,1509680678.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:39.065Z,1509680679.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:39.439Z,1509680679.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:39.843Z,1509680679.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:40.239Z,1509680680.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:40.652Z,1509680680.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:41.111Z,1509680681.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:41.448Z,1509680681.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:41.863Z,1509680681.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:42.237Z,1509680682.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:42.640Z,1509680682.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:43.038Z,1509680683.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:43.487Z,1509680683.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:43.852Z,1509680683.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:44.283Z,1509680684.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:44.646Z,1509680684.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:45.071Z,1509680685.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:45.519Z,1509680685.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:45.840Z,1509680685.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:46.247Z,1509680686.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:46.655Z,1509680686.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:47.059Z,1509680687.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:47.448Z,1509680687.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:47.848Z,1509680687.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:51.123Z,1509680691.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:51.302Z,1509680691.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:51.701Z,1509680691.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:52.104Z,1509680692.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:52.505Z,1509680692.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:52.911Z,1509680692.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:53.290Z,1509680693.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:53.677Z,1509680693.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:54.078Z,1509680694.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:54.486Z,1509680694.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:54.887Z,1509680694.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:55.317Z,1509680695.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:55.683Z,1509680695.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:56.128Z,1509680696.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:56.481Z,1509680696.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:56.930Z,1509680696.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:57.302Z,1509680697.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:57.730Z,1509680697.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:58.091Z,1509680698.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:58.519Z,1509680698.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:58.878Z,1509680698.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:59.330Z,1509680699.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:44:59.691Z,1509680699.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:00.095Z,1509680700.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:00.479Z,1509680700.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:00.887Z,1509680700.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:01.294Z,1509680701.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:01.695Z,1509680701.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:02.091Z,1509680702.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:02.481Z,1509680702.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:02.873Z,1509680702.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:03.305Z,1509680703.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:03.695Z,1509680703.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:04.091Z,1509680704.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:04.484Z,1509680704.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:04.892Z,1509680704.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:05.295Z,1509680705.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:05.695Z,1509680705.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:06.091Z,1509680706.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:06.492Z,1509680706.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:06.867Z,1509680706.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:07.303Z,1509680707.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:07.689Z,1509680707.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:08.089Z,1509680708.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:08.469Z,1509680708.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:08.867Z,1509680708.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:09.303Z,1509680709.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:09.690Z,1509680709.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:10.123Z,1509680710.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:10.476Z,1509680710.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:10.873Z,1509680710.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:11.361Z,1509680711.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:11.704Z,1509680711.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:12.105Z,1509680712.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:12.510Z,1509680712.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:12.875Z,1509680712.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:13.330Z,1509680713.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:13.711Z,1509680713.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:14.102Z,1509680714.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:14.479Z,1509680714.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:14.874Z,1509680714.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:15.305Z,1509680715.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:15.680Z,1509680715.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:16.088Z,1509680716.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:16.483Z,1509680716.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:16.878Z,1509680716.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:17.287Z,1509680717.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:17.692Z,1509680717.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:18.097Z,1509680718.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:18.483Z,1509680718.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:18.883Z,1509680718.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:19.294Z,1509680719.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:19.700Z,1509680719.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:20.101Z,1509680720.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:20.471Z,1509680720.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:20.875Z,1509680720.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:21.302Z,1509680721.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:21.705Z,1509680721.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:22.084Z,1509680722.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:22.471Z,1509680722.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:22.870Z,1509680722.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:23.300Z,1509680723.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:23.684Z,1509680723.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:24.133Z,1509680724.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:24.475Z,1509680724.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:24.883Z,1509680724.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:25.331Z,1509680725.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:25.683Z,1509680725.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:26.089Z,1509680726.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:26.511Z,1509680726.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:26.873Z,1509680726.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:27.314Z,1509680727.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:27.714Z,1509680727.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:28.089Z,1509680728.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:28.477Z,1509680728.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:28.876Z,1509680728.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:29.284Z,1509680729.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:29.689Z,1509680729.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:30.091Z,1509680730.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:30.478Z,1509680730.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:30.874Z,1509680730.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:31.295Z,1509680731.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:31.695Z,1509680731.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:32.087Z,1509680732.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:32.479Z,1509680732.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:32.886Z,1509680732.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:33.291Z,1509680733.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:33.693Z,1509680733.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:34.098Z,1509680734.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:34.489Z,1509680734.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:34.878Z,1509680734.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:35.297Z,1509680735.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:35.698Z,1509680735.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:36.096Z,1509680736.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:36.488Z,1509680736.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:36.867Z,1509680736.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:37.298Z,1509680737.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:37.697Z,1509680737.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:38.110Z,1509680738.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:38.483Z,1509680738.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:38.864Z,1509680738.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:39.310Z,1509680739.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:39.695Z,1509680739.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:40.115Z,1509680740.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:40.469Z,1509680740.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:40.899Z,1509680740.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:41.289Z,1509680741.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:41.732Z,1509680741.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:42.123Z,1509680742.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:42.467Z,1509680742.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:42.866Z,1509680742.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:43.298Z,1509680743.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:43.700Z,1509680743.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:44.097Z,1509680744.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:44.491Z,1509680744.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:44.898Z,1509680744.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:45.306Z,1509680745.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:45.703Z,1509680745.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:46.080Z,1509680746.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:46.471Z,1509680746.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:46.875Z,1509680746.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:47.284Z,1509680747.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:47.678Z,1509680747.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:48.085Z,1509680748.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:51.362Z,1509680751.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:51.514Z,1509680751.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:51.935Z,1509680751.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:52.330Z,1509680752.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:52.721Z,1509680752.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:53.123Z,1509680753.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:53.504Z,1509680753.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:53.903Z,1509680753.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:54.379Z,1509680754.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:54.738Z,1509680754.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:55.113Z,1509680755.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:55.592Z,1509680755.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:55.909Z,1509680755.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:56.339Z,1509680756.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:56.743Z,1509680756.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:57.109Z,1509680757.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:57.612Z,1509680757.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:57.915Z,1509680757.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:58.317Z,1509680758.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:58.735Z,1509680758.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:58.753Z,1509680758.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:58.753Z,1509680758.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2017-11-03T03:45:58.753Z,1509680758.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:45:58.755Z,1509680758.755 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:58.755Z,1509680758.755 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2017-11-03T03:45:58.755Z,1509680758.755 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:45:58.837Z,1509680758.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:45:58.837Z,1509680758.837 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:45:59.151Z,1509680759.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:59.244Z,1509680759.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:45:59.244Z,1509680759.244 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2017-11-03T03:45:59.244Z,1509680759.244 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:45:59.245Z,1509680759.245 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2017-11-03T03:45:59.519Z,1509680759.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:45:59.519Z,1509680759.519 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2017-11-03T03:45:59.519Z,1509680759.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:45:59.520Z,1509680759.520 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:45:59.524Z,1509680759.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:45:59.525Z,1509680759.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:45:59.525Z,1509680759.525 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:45:59.526Z,1509680759.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:45:59.526Z,1509680759.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:45:59.637Z,1509680759.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:46:00.050Z,1509680760.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:46:00.050Z,1509680760.050 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2017-11-03T03:46:00.328Z,1509680760.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:46:00.336Z,1509680760.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:46:00.337Z,1509680760.337 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:46:00.764Z,1509680760.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:01.117Z,1509680761.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:01.542Z,1509680761.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:01.919Z,1509680761.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:02.379Z,1509680762.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:02.727Z,1509680762.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:03.112Z,1509680763.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:03.549Z,1509680763.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:03.954Z,1509680763.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:04.350Z,1509680764.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:04.727Z,1509680764.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:05.173Z,1509680765.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:05.555Z,1509680765.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:05.927Z,1509680765.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:06.375Z,1509680766.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:06.680Z,1509680766.680 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:46:06.681Z,1509680766.681 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T03:46:06.681Z,1509680766.681 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:46:06.741Z,1509680766.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:46:06.742Z,1509680766.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:06.833Z,1509680766.833 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:46:07.085Z,1509680767.085 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:46:07.231Z,1509680767.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T03:46:07.245Z,1509680767.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:07.407Z,1509680767.407 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:46:07.538Z,1509680767.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:46:07.539Z,1509680767.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:07.941Z,1509680767.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:46:07.942Z,1509680767.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:08.358Z,1509680768.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:46:08.359Z,1509680768.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:08.775Z,1509680768.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:46:08.776Z,1509680768.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:08.880Z,1509680768.880 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:46:08.880Z,1509680768.880 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T03:46:09.020Z,1509680769.020 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:46:09.021Z,1509680769.021 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:46:09.021Z,1509680769.021 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:46:09.021Z,1509680769.021 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:46:09.124Z,1509680769.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-11-03T03:46:09.153Z,1509680769.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:09.570Z,1509680769.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:46:09.571Z,1509680769.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:09.959Z,1509680769.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:46:09.969Z,1509680769.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:10.358Z,1509680770.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:46:10.359Z,1509680770.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:10.745Z,1509680770.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:46:10.746Z,1509680770.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:11.109Z,1509680771.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T03:46:11.110Z,1509680771.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:11.510Z,1509680771.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T03:46:11.511Z,1509680771.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:11.908Z,1509680771.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T03:46:11.909Z,1509680771.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:12.316Z,1509680772.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T03:46:12.317Z,1509680772.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:12.716Z,1509680772.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T03:46:12.717Z,1509680772.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:13.191Z,1509680773.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:46:13.193Z,1509680773.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:13.220Z,1509680773.220 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:46:13.347Z,1509680773.347 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:46:13.348Z,1509680773.348 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:46:13.349Z,1509680773.349 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:46:13.349Z,1509680773.349 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:46:13.516Z,1509680773.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T03:46:13.521Z,1509680773.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:13.910Z,1509680773.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:14.315Z,1509680774.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:14.711Z,1509680774.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:15.108Z,1509680775.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:15.519Z,1509680775.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:15.921Z,1509680775.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:16.316Z,1509680776.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:16.709Z,1509680776.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:17.111Z,1509680777.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:17.515Z,1509680777.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:17.919Z,1509680777.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:18.321Z,1509680778.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:18.716Z,1509680778.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:19.119Z,1509680779.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:19.510Z,1509680779.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:19.909Z,1509680779.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:20.378Z,1509680780.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:20.717Z,1509680780.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:21.119Z,1509680781.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:21.519Z,1509680781.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:21.978Z,1509680781.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:22.343Z,1509680782.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:22.699Z,1509680782.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:23.134Z,1509680783.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:23.499Z,1509680783.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:23.898Z,1509680783.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:24.351Z,1509680784.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:24.731Z,1509680784.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:25.150Z,1509680785.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:25.550Z,1509680785.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:25.907Z,1509680785.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:26.311Z,1509680786.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:26.714Z,1509680786.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:27.119Z,1509680787.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:27.519Z,1509680787.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:27.961Z,1509680787.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:28.329Z,1509680788.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:28.716Z,1509680788.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:29.114Z,1509680789.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:29.519Z,1509680789.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:29.902Z,1509680789.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:30.327Z,1509680790.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:30.735Z,1509680790.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:31.123Z,1509680791.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:31.503Z,1509680791.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:31.899Z,1509680791.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:32.322Z,1509680792.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:32.724Z,1509680792.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:33.099Z,1509680793.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:33.534Z,1509680793.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:33.927Z,1509680793.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:34.354Z,1509680794.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:34.706Z,1509680794.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:35.107Z,1509680795.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:35.507Z,1509680795.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:35.905Z,1509680795.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:36.333Z,1509680796.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:36.734Z,1509680796.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:37.148Z,1509680797.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:37.549Z,1509680797.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:38.006Z,1509680798.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:38.332Z,1509680798.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:38.709Z,1509680798.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:39.139Z,1509680799.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:39.550Z,1509680799.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:39.912Z,1509680799.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:40.320Z,1509680800.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:40.715Z,1509680800.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:41.111Z,1509680801.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:41.519Z,1509680801.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:41.914Z,1509680801.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:42.335Z,1509680802.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:42.716Z,1509680802.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:43.118Z,1509680803.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:43.510Z,1509680803.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:43.913Z,1509680803.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:44.335Z,1509680804.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:44.707Z,1509680804.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:45.107Z,1509680805.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:45.512Z,1509680805.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:45.935Z,1509680805.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:46.332Z,1509680806.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:46.712Z,1509680806.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:47.110Z,1509680807.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:47.114Z,1509680807.114 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T03:41:46.9Z
2017-11-03T03:46:47.114Z,1509680807.114 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T03:46:47.114Z,1509680807.114 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T03:46:47.509Z,1509680807.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:48.013Z,1509680808.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:48.313Z,1509680808.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:51.722Z,1509680811.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:52.373Z,1509680812.373 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0084.lzma
2017-11-03T03:46:52.475Z,1509680812.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:52.632Z,1509680812.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:52.991Z,1509680812.991 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0084.lzma.bak
2017-11-03T03:46:52.991Z,1509680812.991 [DataOverHttps](INFO): SBD MOMSN=5182625
2017-11-03T03:46:53.079Z,1509680813.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:53.639Z,1509680813.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:53.867Z,1509680813.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:57.091Z,1509680817.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:57.279Z,1509680817.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:57.651Z,1509680817.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:58.097Z,1509680818.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:58.453Z,1509680818.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:46:58.851Z,1509680818.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:02.162Z,1509680822.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:02.274Z,1509680822.274 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20171103T001125/Express0085.lzma
2017-11-03T03:47:02.351Z,1509680822.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:02.723Z,1509680822.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:03.067Z,1509680823.067 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0085.lzma.bak
2017-11-03T03:47:03.067Z,1509680823.067 [DataOverHttps](INFO): SBD MOMSN=5182627
2017-11-03T03:47:03.127Z,1509680823.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:03.711Z,1509680823.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:03.714Z,1509680823.714 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T03:47:03.715Z,1509680823.715 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T03:47:03.715Z,1509680823.715 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T03:47:03.930Z,1509680823.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:07.226Z,1509680827.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:07.419Z,1509680827.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:07.900Z,1509680827.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:08.206Z,1509680828.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:08.602Z,1509680828.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:09.078Z,1509680829.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:09.416Z,1509680829.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:09.819Z,1509680829.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:10.257Z,1509680830.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:10.609Z,1509680830.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:11.031Z,1509680831.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:11.420Z,1509680831.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:11.816Z,1509680831.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:12.195Z,1509680832.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:12.694Z,1509680832.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:13.008Z,1509680833.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:13.404Z,1509680833.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:13.793Z,1509680833.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:14.230Z,1509680834.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:14.595Z,1509680834.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:14.993Z,1509680834.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:15.401Z,1509680835.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:15.811Z,1509680835.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:16.231Z,1509680836.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:16.592Z,1509680836.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:16.999Z,1509680836.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:17.399Z,1509680837.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:17.822Z,1509680837.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:18.205Z,1509680838.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:18.614Z,1509680838.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:19.014Z,1509680839.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:19.413Z,1509680839.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:19.806Z,1509680839.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:20.211Z,1509680840.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:20.611Z,1509680840.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:21.000Z,1509680841.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:21.413Z,1509680841.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:21.809Z,1509680841.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:22.227Z,1509680842.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:22.612Z,1509680842.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:23.046Z,1509680843.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:23.400Z,1509680843.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:23.830Z,1509680843.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:24.208Z,1509680844.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:24.609Z,1509680844.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:25.050Z,1509680845.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:25.411Z,1509680845.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:25.818Z,1509680845.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:26.230Z,1509680846.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:26.603Z,1509680846.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:27.004Z,1509680847.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:27.413Z,1509680847.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:27.816Z,1509680847.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:28.278Z,1509680848.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:28.605Z,1509680848.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:29.007Z,1509680849.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:29.404Z,1509680849.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:29.803Z,1509680849.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:30.199Z,1509680850.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:30.619Z,1509680850.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:31.019Z,1509680851.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:31.412Z,1509680851.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:31.808Z,1509680851.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:32.209Z,1509680852.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:32.607Z,1509680852.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:33.007Z,1509680853.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:33.417Z,1509680853.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:33.832Z,1509680853.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:34.219Z,1509680854.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:34.592Z,1509680854.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:34.991Z,1509680854.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:35.388Z,1509680855.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:35.793Z,1509680855.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:36.214Z,1509680856.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:36.617Z,1509680856.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:37.016Z,1509680857.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:37.419Z,1509680857.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:37.827Z,1509680857.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:38.234Z,1509680858.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:38.596Z,1509680858.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:39.021Z,1509680859.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:39.401Z,1509680859.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:39.842Z,1509680859.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:40.231Z,1509680860.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:40.624Z,1509680860.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:40.995Z,1509680860.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:41.394Z,1509680861.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:41.796Z,1509680861.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:42.271Z,1509680862.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:42.623Z,1509680862.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:43.023Z,1509680863.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:43.423Z,1509680863.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:43.795Z,1509680863.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:44.194Z,1509680864.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:44.622Z,1509680864.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:44.995Z,1509680864.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:45.408Z,1509680865.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:45.805Z,1509680865.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:46.204Z,1509680866.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:46.604Z,1509680866.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:46.999Z,1509680866.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:47.400Z,1509680867.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:47.804Z,1509680867.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:48.207Z,1509680868.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:48.605Z,1509680868.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:49.008Z,1509680869.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:49.405Z,1509680869.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:49.801Z,1509680869.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:50.208Z,1509680870.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:50.601Z,1509680870.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:51.007Z,1509680871.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:51.404Z,1509680871.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:51.809Z,1509680871.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:52.235Z,1509680872.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:52.646Z,1509680872.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:53.001Z,1509680873.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:53.435Z,1509680873.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:53.803Z,1509680873.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:54.242Z,1509680874.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:54.642Z,1509680874.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:55.008Z,1509680875.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:55.405Z,1509680875.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:55.800Z,1509680875.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:56.251Z,1509680876.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:56.591Z,1509680876.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:56.995Z,1509680876.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:57.422Z,1509680877.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:57.832Z,1509680877.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:58.208Z,1509680878.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:58.599Z,1509680878.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:58.999Z,1509680878.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:59.395Z,1509680879.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:47:59.796Z,1509680879.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:00.199Z,1509680880.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:00.623Z,1509680880.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:01.007Z,1509680881.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:01.408Z,1509680881.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:01.797Z,1509680881.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:02.198Z,1509680882.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:02.596Z,1509680882.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:02.995Z,1509680882.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:03.429Z,1509680883.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:03.826Z,1509680883.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:04.242Z,1509680884.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:07.498Z,1509680887.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:07.669Z,1509680887.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:08.139Z,1509680888.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:08.482Z,1509680888.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:08.895Z,1509680888.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:09.283Z,1509680889.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:09.651Z,1509680889.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:09.660Z,1509680889.660 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T03:48:09.660Z,1509680889.660 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T03:48:09.660Z,1509680889.660 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T03:48:09.760Z,1509680889.760 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T03:48:09.761Z,1509680889.761 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T03:48:10.053Z,1509680890.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T03:48:10.054Z,1509680890.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:10.066Z,1509680890.066 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T03:48:10.289Z,1509680890.289 [Rowe_600LCM](INFO): Powering down
2017-11-03T03:48:10.463Z,1509680890.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T03:48:10.464Z,1509680890.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:10.855Z,1509680890.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:48:10.857Z,1509680890.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:11.256Z,1509680891.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:48:11.257Z,1509680891.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:11.653Z,1509680891.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:48:11.654Z,1509680891.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:12.050Z,1509680892.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:48:12.051Z,1509680892.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:12.454Z,1509680892.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:48:12.455Z,1509680892.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:12.850Z,1509680892.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:48:12.851Z,1509680892.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:13.258Z,1509680893.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:48:13.259Z,1509680893.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:13.657Z,1509680893.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:48:13.658Z,1509680893.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:14.057Z,1509680894.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:48:14.058Z,1509680894.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:14.454Z,1509680894.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:48:14.455Z,1509680894.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:14.851Z,1509680894.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:48:14.853Z,1509680894.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:15.262Z,1509680895.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T03:48:15.263Z,1509680895.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:15.692Z,1509680895.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:48:15.693Z,1509680895.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:16.057Z,1509680896.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:48:16.057Z,1509680896.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:16.452Z,1509680896.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:48:16.453Z,1509680896.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:16.853Z,1509680896.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:48:16.854Z,1509680896.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:17.290Z,1509680897.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T03:48:17.291Z,1509680897.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:17.656Z,1509680897.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:48:17.657Z,1509680897.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:18.059Z,1509680898.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:48:18.060Z,1509680898.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:18.455Z,1509680898.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:48:18.456Z,1509680898.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:18.851Z,1509680898.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:48:18.852Z,1509680898.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:19.266Z,1509680899.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:48:19.267Z,1509680899.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:19.687Z,1509680899.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:48:19.688Z,1509680899.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:20.059Z,1509680900.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:48:20.060Z,1509680900.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:20.455Z,1509680900.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:48:20.456Z,1509680900.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:20.851Z,1509680900.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T03:48:20.852Z,1509680900.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:21.320Z,1509680901.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T03:48:21.321Z,1509680901.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:21.664Z,1509680901.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T03:48:21.665Z,1509680901.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:22.063Z,1509680902.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T03:48:22.064Z,1509680902.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:22.488Z,1509680902.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T03:48:22.489Z,1509680902.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:22.855Z,1509680902.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T03:48:22.856Z,1509680902.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:23.305Z,1509680903.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T03:48:23.306Z,1509680903.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:23.705Z,1509680903.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T03:48:23.706Z,1509680903.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:24.062Z,1509680904.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T03:48:24.063Z,1509680904.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:24.453Z,1509680904.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T03:48:24.454Z,1509680904.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:24.854Z,1509680904.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T03:48:24.855Z,1509680904.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:25.267Z,1509680905.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T03:48:25.268Z,1509680905.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:25.667Z,1509680905.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T03:48:25.668Z,1509680905.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:26.062Z,1509680906.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T03:48:26.063Z,1509680906.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:26.456Z,1509680906.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T03:48:26.457Z,1509680906.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:26.859Z,1509680906.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T03:48:26.860Z,1509680906.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:27.263Z,1509680907.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T03:48:27.265Z,1509680907.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:27.656Z,1509680907.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T03:48:27.657Z,1509680907.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:28.063Z,1509680908.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T03:48:28.064Z,1509680908.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:28.453Z,1509680908.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T03:48:28.454Z,1509680908.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:28.847Z,1509680908.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T03:48:28.848Z,1509680908.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:29.263Z,1509680909.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T03:48:29.264Z,1509680909.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:29.665Z,1509680909.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:30.060Z,1509680910.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:30.455Z,1509680910.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:30.856Z,1509680910.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:31.269Z,1509680911.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:31.668Z,1509680911.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:32.064Z,1509680912.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:32.457Z,1509680912.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:32.856Z,1509680912.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:33.264Z,1509680913.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:33.669Z,1509680913.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:34.069Z,1509680914.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:34.454Z,1509680914.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:34.859Z,1509680914.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:35.265Z,1509680915.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:35.718Z,1509680915.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:36.083Z,1509680916.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:36.460Z,1509680916.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:36.875Z,1509680916.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:37.269Z,1509680917.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:37.710Z,1509680917.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:38.108Z,1509680918.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:38.462Z,1509680918.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:38.861Z,1509680918.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:39.268Z,1509680919.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:39.669Z,1509680919.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:40.065Z,1509680920.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:40.461Z,1509680920.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:40.839Z,1509680920.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:41.271Z,1509680921.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:41.671Z,1509680921.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:42.069Z,1509680922.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:42.461Z,1509680922.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:42.859Z,1509680922.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:43.269Z,1509680923.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:43.662Z,1509680923.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:44.071Z,1509680924.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:44.468Z,1509680924.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:44.862Z,1509680924.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:45.267Z,1509680925.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:45.669Z,1509680925.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:46.067Z,1509680926.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:46.444Z,1509680926.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:46.843Z,1509680926.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:47.267Z,1509680927.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:47.667Z,1509680927.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:48.075Z,1509680928.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:48.467Z,1509680928.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:48.843Z,1509680928.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:49.270Z,1509680929.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:49.690Z,1509680929.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:50.091Z,1509680930.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:50.443Z,1509680930.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:50.894Z,1509680930.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:51.269Z,1509680931.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:51.695Z,1509680931.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:52.086Z,1509680932.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:52.471Z,1509680932.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:52.850Z,1509680932.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:53.277Z,1509680933.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:53.677Z,1509680933.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:54.079Z,1509680934.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:54.452Z,1509680934.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:54.851Z,1509680934.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:55.279Z,1509680935.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:55.653Z,1509680935.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:56.078Z,1509680936.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:56.448Z,1509680936.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:56.847Z,1509680936.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:57.277Z,1509680937.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:57.652Z,1509680937.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:58.059Z,1509680938.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:58.452Z,1509680938.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:58.847Z,1509680938.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:59.285Z,1509680939.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:59.656Z,1509680939.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:59.658Z,1509680939.658 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:59.659Z,1509680939.659 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2017-11-03T03:48:59.659Z,1509680939.659 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:48:59.677Z,1509680939.677 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:48:59.677Z,1509680939.677 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2017-11-03T03:48:59.677Z,1509680939.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:48:59.773Z,1509680939.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:48:59.773Z,1509680939.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:49:00.060Z,1509680940.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:00.168Z,1509680940.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:49:00.168Z,1509680940.168 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2017-11-03T03:49:00.169Z,1509680940.169 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:49:00.169Z,1509680940.169 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2017-11-03T03:49:00.454Z,1509680940.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:00.454Z,1509680940.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2017-11-03T03:49:00.454Z,1509680940.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:49:00.455Z,1509680940.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:49:00.455Z,1509680940.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:49:00.456Z,1509680940.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:49:00.456Z,1509680940.456 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:49:00.457Z,1509680940.457 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:49:00.457Z,1509680940.457 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:49:00.564Z,1509680940.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:49:00.933Z,1509680940.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:49:00.933Z,1509680940.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2017-11-03T03:49:01.259Z,1509680941.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:49:01.259Z,1509680941.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:49:01.260Z,1509680941.260 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:49:01.660Z,1509680941.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:49:01.661Z,1509680941.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:02.056Z,1509680942.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:49:02.057Z,1509680942.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:02.453Z,1509680942.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:49:02.454Z,1509680942.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:02.853Z,1509680942.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:49:02.854Z,1509680942.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:03.262Z,1509680943.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:49:03.263Z,1509680943.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:03.722Z,1509680943.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-03T03:49:03.723Z,1509680943.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:04.060Z,1509680944.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:49:04.061Z,1509680944.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:04.454Z,1509680944.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:49:04.455Z,1509680944.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:07.555Z,1509680947.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T03:49:07.556Z,1509680947.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:07.727Z,1509680947.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T03:49:07.729Z,1509680947.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:08.161Z,1509680948.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T03:49:08.162Z,1509680948.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:08.547Z,1509680948.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T03:49:08.548Z,1509680948.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:08.906Z,1509680948.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T03:49:08.907Z,1509680948.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:09.330Z,1509680949.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T03:49:09.330Z,1509680949.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:09.716Z,1509680949.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T03:49:09.717Z,1509680949.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:10.113Z,1509680950.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T03:49:10.114Z,1509680950.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:10.523Z,1509680950.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T03:49:10.524Z,1509680950.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:10.927Z,1509680950.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T03:49:10.928Z,1509680950.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:11.312Z,1509680951.312 [PNI_TCM](ERROR): CRC does not match. Expected:0x25309 got:0x14875
2017-11-03T03:49:11.348Z,1509680951.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T03:49:11.349Z,1509680951.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:11.719Z,1509680951.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T03:49:11.720Z,1509680951.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:12.107Z,1509680952.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T03:49:12.108Z,1509680952.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:12.530Z,1509680952.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T03:49:12.531Z,1509680952.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:12.911Z,1509680952.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T03:49:12.912Z,1509680952.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:13.326Z,1509680953.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T03:49:13.327Z,1509680953.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:13.717Z,1509680953.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T03:49:13.718Z,1509680953.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:14.145Z,1509680954.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T03:49:14.146Z,1509680954.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:14.507Z,1509680954.507 [PNI_TCM](ERROR): CRC does not match. Expected:0x14664 got:0x39431
2017-11-03T03:49:14.527Z,1509680954.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T03:49:14.528Z,1509680954.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:14.913Z,1509680954.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T03:49:14.914Z,1509680954.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:15.314Z,1509680955.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T03:49:15.315Z,1509680955.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:15.730Z,1509680955.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T03:49:15.731Z,1509680955.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:16.114Z,1509680956.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T03:49:16.115Z,1509680956.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:16.523Z,1509680956.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T03:49:16.524Z,1509680956.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:16.930Z,1509680956.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T03:49:16.931Z,1509680956.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:17.334Z,1509680957.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T03:49:17.335Z,1509680957.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:17.706Z,1509680957.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x47984 got:0x19483
2017-11-03T03:49:17.730Z,1509680957.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T03:49:17.731Z,1509680957.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:18.115Z,1509680958.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T03:49:18.116Z,1509680958.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:18.507Z,1509680958.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T03:49:18.508Z,1509680958.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:18.930Z,1509680958.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T03:49:18.931Z,1509680958.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:19.327Z,1509680959.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T03:49:19.328Z,1509680959.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:19.727Z,1509680959.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T03:49:19.727Z,1509680959.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:20.122Z,1509680960.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T03:49:20.123Z,1509680960.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:20.564Z,1509680960.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:20.935Z,1509680960.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:21.313Z,1509680961.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:21.739Z,1509680961.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:22.131Z,1509680962.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:22.515Z,1509680962.515 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-03T03:49:22.574Z,1509680962.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:22.955Z,1509680962.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:23.331Z,1509680963.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:23.730Z,1509680963.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:24.118Z,1509680964.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:24.515Z,1509680964.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:24.910Z,1509680964.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:25.331Z,1509680965.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:25.711Z,1509680965.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x44284 got:0x61467
2017-11-03T03:49:25.758Z,1509680965.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:26.128Z,1509680966.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:26.508Z,1509680966.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:26.917Z,1509680966.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:27.313Z,1509680967.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:27.707Z,1509680967.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:28.104Z,1509680968.104 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-03T03:49:28.131Z,1509680968.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:28.535Z,1509680968.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:28.919Z,1509680968.919 [PNI_TCM](ERROR): CRC does not match. Expected:0x50456 got:0x47367
2017-11-03T03:49:28.939Z,1509680968.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:29.323Z,1509680969.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:29.709Z,1509680969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:30.130Z,1509680970.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:30.515Z,1509680970.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:30.912Z,1509680970.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:31.318Z,1509680971.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:31.726Z,1509680971.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:32.123Z,1509680972.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:32.515Z,1509680972.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:32.913Z,1509680972.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:33.330Z,1509680973.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:33.718Z,1509680973.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:34.114Z,1509680974.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:34.521Z,1509680974.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:34.987Z,1509680974.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:35.322Z,1509680975.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:35.712Z,1509680975.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:36.134Z,1509680976.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:36.562Z,1509680976.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:36.930Z,1509680976.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:37.351Z,1509680977.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:37.729Z,1509680977.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:38.130Z,1509680978.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:38.503Z,1509680978.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:38.900Z,1509680978.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:39.301Z,1509680979.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:39.727Z,1509680979.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:40.098Z,1509680980.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:40.523Z,1509680980.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:40.928Z,1509680980.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:41.329Z,1509680981.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:41.726Z,1509680981.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:42.129Z,1509680982.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:42.526Z,1509680982.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:42.934Z,1509680982.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:43.327Z,1509680983.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:43.726Z,1509680983.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:44.123Z,1509680984.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:44.530Z,1509680984.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:44.901Z,1509680984.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:45.303Z,1509680985.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:45.703Z,1509680985.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:46.122Z,1509680986.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:46.523Z,1509680986.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:46.935Z,1509680986.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:47.321Z,1509680987.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:47.722Z,1509680987.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:48.103Z,1509680988.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:48.496Z,1509680988.496 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T03:49:48.496Z,1509680988.496 [BPC1] Data Fault, FailCount= 1
2017-11-03T03:49:48.496Z,1509680988.496 [BPC1](ERROR): Data Fault
2017-11-03T03:49:48.529Z,1509680988.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:48.625Z,1509680988.625 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T03:49:48.900Z,1509680988.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:49.330Z,1509680989.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:49.735Z,1509680989.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:49.817Z,1509680989.817 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:49:49.817Z,1509680989.817 [BPC1] No Fault, FailCount= 1
2017-11-03T03:49:50.171Z,1509680990.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:50.507Z,1509680990.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:50.925Z,1509680990.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:51.334Z,1509680991.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:51.703Z,1509680991.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:52.100Z,1509680992.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:52.528Z,1509680992.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:52.929Z,1509680992.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:53.327Z,1509680993.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:53.700Z,1509680993.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:54.130Z,1509680994.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:54.502Z,1509680994.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:54.907Z,1509680994.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:55.329Z,1509680995.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:55.731Z,1509680995.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:56.126Z,1509680996.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:56.534Z,1509680996.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:56.900Z,1509680996.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x14816 got:0x1857
2017-11-03T03:49:56.934Z,1509680996.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:57.330Z,1509680997.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:57.705Z,1509680997.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:58.108Z,1509680998.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:58.528Z,1509680998.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:58.935Z,1509680998.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:59.327Z,1509680999.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:49:59.705Z,1509680999.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:00.101Z,1509681000.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:00.531Z,1509681000.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:00.904Z,1509681000.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:01.330Z,1509681001.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:01.728Z,1509681001.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:02.134Z,1509681002.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:02.540Z,1509681002.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:02.897Z,1509681002.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x57002 got:0x45584
2017-11-03T03:50:02.934Z,1509681002.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:03.374Z,1509681003.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:03.710Z,1509681003.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:04.146Z,1509681004.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:04.531Z,1509681004.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:07.655Z,1509681007.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:07.836Z,1509681007.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:08.255Z,1509681008.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:08.632Z,1509681008.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:09.016Z,1509681009.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:09.438Z,1509681009.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:09.847Z,1509681009.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:10.234Z,1509681010.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:10.611Z,1509681010.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:11.038Z,1509681011.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:11.416Z,1509681011.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:11.817Z,1509681011.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:12.215Z,1509681012.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:12.640Z,1509681012.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:13.042Z,1509681013.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:13.442Z,1509681013.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:13.818Z,1509681013.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:14.239Z,1509681014.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:14.615Z,1509681014.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:15.015Z,1509681015.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:15.436Z,1509681015.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:15.846Z,1509681015.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:16.228Z,1509681016.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:16.615Z,1509681016.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:17.018Z,1509681017.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:17.457Z,1509681017.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:17.833Z,1509681017.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:18.246Z,1509681018.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:18.636Z,1509681018.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:19.035Z,1509681019.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:19.426Z,1509681019.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:19.825Z,1509681019.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:20.282Z,1509681020.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:20.641Z,1509681020.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:21.073Z,1509681021.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:21.443Z,1509681021.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:21.847Z,1509681021.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:22.240Z,1509681022.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:22.619Z,1509681022.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:23.018Z,1509681023.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:23.443Z,1509681023.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:23.846Z,1509681023.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:24.223Z,1509681024.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:24.619Z,1509681024.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:25.018Z,1509681025.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:25.419Z,1509681025.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:25.825Z,1509681025.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:26.219Z,1509681026.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:26.647Z,1509681026.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:27.047Z,1509681027.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:27.446Z,1509681027.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:27.824Z,1509681027.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:28.219Z,1509681028.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:28.619Z,1509681028.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:29.018Z,1509681029.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:29.448Z,1509681029.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:29.846Z,1509681029.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:30.248Z,1509681030.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:30.619Z,1509681030.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:31.019Z,1509681031.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:31.419Z,1509681031.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:31.821Z,1509681031.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:32.222Z,1509681032.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:32.625Z,1509681032.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:32.991Z,1509681032.991 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T03:50:32.991Z,1509681032.991 [NAL9602] Data Fault, FailCount= 5
2017-11-03T03:50:32.991Z,1509681032.991 [NAL9602](ERROR): Data Fault
2017-11-03T03:50:33.024Z,1509681033.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:33.125Z,1509681033.125 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T03:50:33.125Z,1509681033.125 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T03:50:33.386Z,1509681033.386 [NAL9602](INFO): Powering down
2017-11-03T03:50:33.420Z,1509681033.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:33.506Z,1509681033.506 [CBIT](INFO): Critical error at 20171103T035033
2017-11-03T03:50:33.840Z,1509681033.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:34.267Z,1509681034.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:34.623Z,1509681034.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:35.052Z,1509681035.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:35.422Z,1509681035.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:35.850Z,1509681035.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:36.217Z,1509681036.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:36.655Z,1509681036.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:37.023Z,1509681037.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:37.423Z,1509681037.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:37.825Z,1509681037.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:38.223Z,1509681038.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:38.623Z,1509681038.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:39.024Z,1509681039.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:39.423Z,1509681039.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:39.824Z,1509681039.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:40.224Z,1509681040.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:40.617Z,1509681040.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:41.023Z,1509681041.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:41.424Z,1509681041.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:41.823Z,1509681041.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:42.217Z,1509681042.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:42.624Z,1509681042.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:43.017Z,1509681043.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:43.423Z,1509681043.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:43.823Z,1509681043.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:44.223Z,1509681044.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:44.624Z,1509681044.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:45.025Z,1509681045.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:45.423Z,1509681045.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:45.822Z,1509681045.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:46.224Z,1509681046.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:46.623Z,1509681046.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:47.024Z,1509681047.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:47.424Z,1509681047.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:47.824Z,1509681047.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:48.222Z,1509681048.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:48.673Z,1509681048.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:49.023Z,1509681049.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:49.423Z,1509681049.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:49.818Z,1509681049.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:50.222Z,1509681050.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:50.623Z,1509681050.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:51.024Z,1509681051.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:51.421Z,1509681051.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:51.811Z,1509681051.811 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:50:51.811Z,1509681051.811 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:50:51.811Z,1509681051.811 [BPC1](ERROR): Communications Fault
2017-11-03T03:50:51.827Z,1509681051.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:51.957Z,1509681051.957 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:50:52.227Z,1509681052.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:52.622Z,1509681052.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:53.057Z,1509681053.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:53.145Z,1509681053.145 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:50:53.145Z,1509681053.145 [BPC1] No Fault, FailCount= 1
2017-11-03T03:50:53.522Z,1509681053.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:53.869Z,1509681053.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:54.231Z,1509681054.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:54.623Z,1509681054.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:55.078Z,1509681055.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:55.437Z,1509681055.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:55.854Z,1509681055.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:56.266Z,1509681056.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:56.621Z,1509681056.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:57.043Z,1509681057.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:57.439Z,1509681057.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:57.834Z,1509681057.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:58.247Z,1509681058.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:58.622Z,1509681058.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:59.035Z,1509681059.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:59.475Z,1509681059.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:50:59.890Z,1509681059.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:00.271Z,1509681060.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:00.641Z,1509681060.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:01.066Z,1509681061.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:01.424Z,1509681061.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:01.833Z,1509681061.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:02.286Z,1509681062.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:02.672Z,1509681062.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:03.067Z,1509681063.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:03.439Z,1509681063.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:03.824Z,1509681063.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:04.225Z,1509681064.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:04.631Z,1509681064.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:07.809Z,1509681067.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:07.995Z,1509681067.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:08.373Z,1509681068.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:08.795Z,1509681068.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:09.174Z,1509681069.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:09.619Z,1509681069.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:09.999Z,1509681069.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:10.375Z,1509681070.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:10.770Z,1509681070.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:11.172Z,1509681071.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:11.574Z,1509681071.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:11.971Z,1509681071.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:12.374Z,1509681072.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:12.771Z,1509681072.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:13.175Z,1509681073.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:13.578Z,1509681073.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:13.967Z,1509681073.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:14.381Z,1509681074.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:14.759Z,1509681074.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:15.180Z,1509681075.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:15.581Z,1509681075.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:15.980Z,1509681075.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:16.359Z,1509681076.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:16.781Z,1509681076.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:17.181Z,1509681077.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:17.557Z,1509681077.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:17.980Z,1509681077.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:18.382Z,1509681078.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:18.780Z,1509681078.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:19.182Z,1509681079.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:19.580Z,1509681079.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:19.980Z,1509681079.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:20.383Z,1509681080.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:20.799Z,1509681080.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:21.180Z,1509681081.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:21.581Z,1509681081.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:21.980Z,1509681081.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:22.426Z,1509681082.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:22.781Z,1509681082.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:23.180Z,1509681083.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:23.598Z,1509681083.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:23.980Z,1509681083.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:24.391Z,1509681084.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:24.821Z,1509681084.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:25.181Z,1509681085.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:25.580Z,1509681085.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:25.980Z,1509681085.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:26.379Z,1509681086.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:26.783Z,1509681086.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:27.181Z,1509681087.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:27.579Z,1509681087.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:27.980Z,1509681087.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:28.380Z,1509681088.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:28.780Z,1509681088.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:29.181Z,1509681089.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:29.580Z,1509681089.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:29.979Z,1509681089.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:30.380Z,1509681090.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:30.803Z,1509681090.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:31.181Z,1509681091.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:31.580Z,1509681091.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:31.980Z,1509681091.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:32.380Z,1509681092.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:32.780Z,1509681092.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:33.180Z,1509681093.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:33.579Z,1509681093.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:33.980Z,1509681093.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:34.380Z,1509681094.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:34.780Z,1509681094.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:35.180Z,1509681095.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:35.611Z,1509681095.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:35.979Z,1509681095.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:36.380Z,1509681096.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:36.787Z,1509681096.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:37.203Z,1509681097.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:37.558Z,1509681097.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:38.006Z,1509681098.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:38.370Z,1509681098.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:38.803Z,1509681098.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:39.169Z,1509681099.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:39.599Z,1509681099.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:39.972Z,1509681099.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:40.375Z,1509681100.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:40.775Z,1509681100.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:41.182Z,1509681101.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:41.576Z,1509681101.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:41.982Z,1509681101.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:42.372Z,1509681102.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:42.774Z,1509681102.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:43.175Z,1509681103.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:43.573Z,1509681103.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:43.971Z,1509681103.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:44.374Z,1509681104.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:44.473Z,1509681104.473 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T03:51:44.782Z,1509681104.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:45.159Z,1509681105.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:45.558Z,1509681105.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:45.981Z,1509681105.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:46.380Z,1509681106.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:46.779Z,1509681106.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:47.180Z,1509681107.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:47.580Z,1509681107.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:47.979Z,1509681107.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:48.381Z,1509681108.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:48.780Z,1509681108.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:49.180Z,1509681109.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:49.580Z,1509681109.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:49.980Z,1509681109.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:50.399Z,1509681110.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:50.784Z,1509681110.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:51.182Z,1509681111.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:51.603Z,1509681111.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:51.984Z,1509681111.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:52.362Z,1509681112.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:52.795Z,1509681112.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:53.183Z,1509681113.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:53.603Z,1509681113.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:53.995Z,1509681113.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:54.382Z,1509681114.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:54.782Z,1509681114.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:55.182Z,1509681115.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:55.583Z,1509681115.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:55.983Z,1509681115.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:56.382Z,1509681116.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:56.761Z,1509681116.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:57.163Z,1509681117.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:57.581Z,1509681117.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:57.982Z,1509681117.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:58.382Z,1509681118.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:58.782Z,1509681118.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:59.183Z,1509681119.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:59.582Z,1509681119.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:51:59.982Z,1509681119.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:00.362Z,1509681120.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:00.782Z,1509681120.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:00.783Z,1509681120.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:00.783Z,1509681120.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2017-11-03T03:52:00.784Z,1509681120.784 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:52:00.786Z,1509681120.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:00.786Z,1509681120.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2017-11-03T03:52:00.786Z,1509681120.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:52:00.865Z,1509681120.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:52:00.865Z,1509681120.865 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:52:01.165Z,1509681121.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:01.260Z,1509681121.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:52:01.260Z,1509681121.260 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2017-11-03T03:52:01.261Z,1509681121.261 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:52:01.261Z,1509681121.261 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2017-11-03T03:52:01.566Z,1509681121.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:01.566Z,1509681121.566 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2017-11-03T03:52:01.566Z,1509681121.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:52:01.567Z,1509681121.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:52:01.568Z,1509681121.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:52:01.568Z,1509681121.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:52:01.597Z,1509681121.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:52:01.597Z,1509681121.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:52:01.597Z,1509681121.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:52:01.685Z,1509681121.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:52:02.064Z,1509681122.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:52:02.065Z,1509681122.065 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2017-11-03T03:52:02.368Z,1509681122.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:52:02.369Z,1509681122.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:52:02.369Z,1509681122.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:52:02.770Z,1509681122.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:52:02.771Z,1509681122.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:03.163Z,1509681123.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:52:03.164Z,1509681123.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:03.563Z,1509681123.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:52:03.564Z,1509681123.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:03.971Z,1509681123.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:52:03.972Z,1509681123.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:03.998Z,1509681123.998 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T03:52:03.998Z,1509681123.998 [Default:CheckIn:C.Wait] Stopped
2017-11-03T03:52:03.998Z,1509681123.998 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T03:52:03.998Z,1509681123.998 [Default:CheckIn:D] Running Loop=1
2017-11-03T03:52:04.366Z,1509681124.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:52:04.367Z,1509681124.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:04.371Z,1509681124.371 [Default:CheckIn:D] Stopped
2017-11-03T03:52:04.371Z,1509681124.371 [Default:CheckIn:E] Running Loop=1
2017-11-03T03:52:04.803Z,1509681124.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:52:04.804Z,1509681124.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:04.807Z,1509681124.807 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 216.946745 min 
2017-11-03T03:52:04.807Z,1509681124.807 [Default:CheckIn:E] Stopped
2017-11-03T03:52:04.807Z,1509681124.807 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T03:52:04.808Z,1509681124.808 [Default:CheckIn] Stopped
2017-11-03T03:52:04.808Z,1509681124.808 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T03:52:04.808Z,1509681124.808 [Default:CheckIn](INFO): Running loop #22
2017-11-03T03:52:04.808Z,1509681124.808 [Default:CheckIn] Running Loop=22
2017-11-03T03:52:04.808Z,1509681124.808 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T03:52:04.808Z,1509681124.808 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T03:52:07.908Z,1509681127.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T03:52:07.909Z,1509681127.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:08.070Z,1509681128.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T03:52:08.071Z,1509681128.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:08.458Z,1509681128.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T03:52:08.459Z,1509681128.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:08.847Z,1509681128.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T03:52:08.848Z,1509681128.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:09.266Z,1509681129.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T03:52:09.267Z,1509681129.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:09.663Z,1509681129.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T03:52:09.664Z,1509681129.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:10.059Z,1509681130.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T03:52:10.060Z,1509681130.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:10.457Z,1509681130.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T03:52:10.458Z,1509681130.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:10.856Z,1509681130.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T03:52:10.858Z,1509681130.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:11.257Z,1509681131.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T03:52:11.258Z,1509681131.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:11.656Z,1509681131.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T03:52:11.657Z,1509681131.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:12.033Z,1509681132.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T03:52:12.034Z,1509681132.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:12.458Z,1509681132.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T03:52:12.459Z,1509681132.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:12.834Z,1509681132.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T03:52:12.835Z,1509681132.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:13.240Z,1509681133.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T03:52:13.263Z,1509681133.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:13.638Z,1509681133.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T03:52:13.639Z,1509681133.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:14.034Z,1509681134.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T03:52:14.035Z,1509681134.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:14.436Z,1509681134.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T03:52:14.437Z,1509681134.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:14.858Z,1509681134.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T03:52:14.859Z,1509681134.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:15.247Z,1509681135.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T03:52:15.248Z,1509681135.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:15.647Z,1509681135.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T03:52:15.648Z,1509681135.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:16.048Z,1509681136.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T03:52:16.049Z,1509681136.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:16.442Z,1509681136.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T03:52:16.443Z,1509681136.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:16.842Z,1509681136.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T03:52:16.843Z,1509681136.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:17.249Z,1509681137.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T03:52:17.250Z,1509681137.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:17.642Z,1509681137.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T03:52:17.643Z,1509681137.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:18.046Z,1509681138.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T03:52:18.047Z,1509681138.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:18.449Z,1509681138.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T03:52:18.449Z,1509681138.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:18.848Z,1509681138.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T03:52:18.849Z,1509681138.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:19.249Z,1509681139.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T03:52:19.250Z,1509681139.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:19.649Z,1509681139.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T03:52:19.650Z,1509681139.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:20.110Z,1509681140.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T03:52:20.110Z,1509681140.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:20.447Z,1509681140.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T03:52:20.448Z,1509681140.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:20.848Z,1509681140.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T03:52:20.849Z,1509681140.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:21.248Z,1509681141.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T03:52:21.249Z,1509681141.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:21.663Z,1509681141.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:22.049Z,1509681142.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:22.470Z,1509681142.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:22.848Z,1509681142.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:23.266Z,1509681143.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:23.667Z,1509681143.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:24.049Z,1509681144.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:24.448Z,1509681144.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:24.847Z,1509681144.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:25.249Z,1509681145.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:25.655Z,1509681145.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:26.046Z,1509681146.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:26.454Z,1509681146.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:26.874Z,1509681146.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:27.246Z,1509681147.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:27.634Z,1509681147.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:28.035Z,1509681148.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:28.457Z,1509681148.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:28.857Z,1509681148.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:29.257Z,1509681149.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:29.656Z,1509681149.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:30.056Z,1509681150.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:30.457Z,1509681150.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:30.857Z,1509681150.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:31.258Z,1509681151.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:31.658Z,1509681151.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:32.051Z,1509681152.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:32.463Z,1509681152.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:32.834Z,1509681152.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:33.239Z,1509681153.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:33.345Z,1509681153.345 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T03:52:33.345Z,1509681153.345 [NAL9602] No Fault, FailCount= 5
2017-11-03T03:52:33.607Z,1509681153.607 [NAL9602](INFO): Powering up NAL9602
2017-11-03T03:52:33.639Z,1509681153.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:34.087Z,1509681154.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:34.439Z,1509681154.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:34.840Z,1509681154.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:35.238Z,1509681155.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:35.682Z,1509681155.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:36.051Z,1509681156.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:36.471Z,1509681156.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:36.857Z,1509681156.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:37.275Z,1509681157.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:37.671Z,1509681157.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:38.049Z,1509681158.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:38.450Z,1509681158.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:38.853Z,1509681158.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:39.255Z,1509681159.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:39.650Z,1509681159.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:40.039Z,1509681160.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:40.458Z,1509681160.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:40.854Z,1509681160.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:41.255Z,1509681161.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:41.656Z,1509681161.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:42.034Z,1509681162.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:42.434Z,1509681162.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:42.851Z,1509681162.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:43.262Z,1509681163.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:43.634Z,1509681163.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:44.061Z,1509681164.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:44.460Z,1509681164.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:44.807Z,1509681164.807 [NAL9602](INFO): NAL9602 initialized
2017-11-03T03:52:44.839Z,1509681164.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:45.240Z,1509681165.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:45.665Z,1509681165.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:46.063Z,1509681166.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:46.467Z,1509681166.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:46.840Z,1509681166.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:47.265Z,1509681167.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:47.641Z,1509681167.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:48.042Z,1509681168.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:48.487Z,1509681168.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:48.871Z,1509681168.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:49.269Z,1509681169.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:49.639Z,1509681169.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:50.039Z,1509681170.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:50.439Z,1509681170.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:50.839Z,1509681170.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:51.271Z,1509681171.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:51.668Z,1509681171.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:52.068Z,1509681172.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:52.443Z,1509681172.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:52.831Z,1509681172.831 [BPC1](ERROR): Failed to receive battery data
2017-11-03T03:52:52.831Z,1509681172.831 [BPC1] Communications Fault, FailCount= 1
2017-11-03T03:52:52.831Z,1509681172.831 [BPC1](ERROR): Communications Fault
2017-11-03T03:52:52.839Z,1509681172.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:52.949Z,1509681172.949 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T03:52:53.239Z,1509681173.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:53.660Z,1509681173.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:54.034Z,1509681174.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:54.145Z,1509681174.145 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T03:52:54.145Z,1509681174.145 [BPC1] No Fault, FailCount= 1
2017-11-03T03:52:54.511Z,1509681174.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:54.861Z,1509681174.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:55.264Z,1509681175.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:55.657Z,1509681175.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:56.051Z,1509681176.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:56.463Z,1509681176.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:56.835Z,1509681176.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:57.263Z,1509681177.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:57.661Z,1509681177.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:58.063Z,1509681178.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:58.479Z,1509681178.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:58.861Z,1509681178.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:59.238Z,1509681179.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:52:59.657Z,1509681179.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:00.061Z,1509681180.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:00.463Z,1509681180.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:00.861Z,1509681180.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:01.264Z,1509681181.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:01.639Z,1509681181.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:02.050Z,1509681182.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:02.462Z,1509681182.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:02.839Z,1509681182.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:03.263Z,1509681183.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:03.663Z,1509681183.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:04.063Z,1509681184.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:04.451Z,1509681184.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:04.861Z,1509681184.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:07.983Z,1509681187.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:08.148Z,1509681188.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:08.560Z,1509681188.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:08.959Z,1509681188.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:09.430Z,1509681189.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:09.738Z,1509681189.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:10.136Z,1509681190.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:10.570Z,1509681190.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:10.965Z,1509681190.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:11.383Z,1509681191.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:11.771Z,1509681191.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:12.146Z,1509681192.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:12.543Z,1509681192.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:12.943Z,1509681192.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:13.337Z,1509681193.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:13.743Z,1509681193.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:14.146Z,1509681194.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:14.540Z,1509681194.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:14.941Z,1509681194.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:15.341Z,1509681195.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:15.739Z,1509681195.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:16.146Z,1509681196.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:16.539Z,1509681196.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:16.979Z,1509681196.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:17.344Z,1509681197.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:17.765Z,1509681197.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:18.146Z,1509681198.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:18.536Z,1509681198.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:18.939Z,1509681198.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:19.339Z,1509681199.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:19.737Z,1509681199.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:20.135Z,1509681200.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:20.558Z,1509681200.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:20.945Z,1509681200.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:21.341Z,1509681201.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:21.736Z,1509681201.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:22.141Z,1509681202.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:22.582Z,1509681202.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:22.937Z,1509681202.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:23.341Z,1509681203.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:23.745Z,1509681203.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:24.141Z,1509681204.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:24.578Z,1509681204.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:24.936Z,1509681204.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:25.374Z,1509681205.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:25.775Z,1509681205.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:26.135Z,1509681206.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:26.545Z,1509681206.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:26.951Z,1509681206.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:27.341Z,1509681207.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:27.742Z,1509681207.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:28.136Z,1509681208.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:28.542Z,1509681208.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:28.939Z,1509681208.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:29.342Z,1509681209.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:29.779Z,1509681209.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:30.151Z,1509681210.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:30.539Z,1509681210.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:30.937Z,1509681210.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:31.338Z,1509681211.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:31.747Z,1509681211.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:32.137Z,1509681212.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:32.550Z,1509681212.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:32.941Z,1509681212.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:33.344Z,1509681213.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:33.739Z,1509681213.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:34.138Z,1509681214.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:34.539Z,1509681214.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:34.949Z,1509681214.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:35.346Z,1509681215.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:35.743Z,1509681215.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:36.143Z,1509681216.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:36.535Z,1509681216.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:36.989Z,1509681216.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:37.342Z,1509681217.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:37.786Z,1509681217.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:38.141Z,1509681218.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:38.579Z,1509681218.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:38.944Z,1509681218.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:39.378Z,1509681219.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:39.774Z,1509681219.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:40.136Z,1509681220.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:40.539Z,1509681220.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:40.940Z,1509681220.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:41.349Z,1509681221.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:41.751Z,1509681221.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:42.148Z,1509681222.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:42.539Z,1509681222.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:42.936Z,1509681222.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:43.343Z,1509681223.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:43.743Z,1509681223.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:44.137Z,1509681224.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:44.555Z,1509681224.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:44.947Z,1509681224.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:45.347Z,1509681225.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:45.740Z,1509681225.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:46.141Z,1509681226.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:46.540Z,1509681226.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:46.944Z,1509681226.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:47.348Z,1509681227.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:47.751Z,1509681227.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:48.159Z,1509681228.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:48.537Z,1509681228.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:48.939Z,1509681228.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:49.347Z,1509681229.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:49.747Z,1509681229.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:50.163Z,1509681230.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:50.555Z,1509681230.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:50.952Z,1509681230.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:51.345Z,1509681231.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:51.767Z,1509681231.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:52.147Z,1509681232.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:52.543Z,1509681232.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:52.975Z,1509681232.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:53.355Z,1509681233.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:53.779Z,1509681233.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:54.179Z,1509681234.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:54.540Z,1509681234.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:54.940Z,1509681234.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:55.341Z,1509681235.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:55.743Z,1509681235.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:56.142Z,1509681236.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:56.549Z,1509681236.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:56.947Z,1509681236.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:57.355Z,1509681237.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:57.734Z,1509681237.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:58.143Z,1509681238.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:58.539Z,1509681238.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:58.942Z,1509681238.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:59.355Z,1509681239.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:53:59.744Z,1509681239.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:00.149Z,1509681240.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:00.547Z,1509681240.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:00.947Z,1509681240.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:01.345Z,1509681241.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:01.745Z,1509681241.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:02.153Z,1509681242.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:02.554Z,1509681242.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:02.955Z,1509681242.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:03.351Z,1509681243.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:03.753Z,1509681243.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:04.143Z,1509681244.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:04.532Z,1509681244.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:04.982Z,1509681244.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:08.067Z,1509681248.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:08.233Z,1509681248.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:08.634Z,1509681248.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:09.059Z,1509681249.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:09.422Z,1509681249.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:09.851Z,1509681249.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:10.263Z,1509681250.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:10.628Z,1509681250.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:11.034Z,1509681251.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:11.423Z,1509681251.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:11.821Z,1509681251.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:12.234Z,1509681252.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:12.627Z,1509681252.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:13.027Z,1509681253.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:13.421Z,1509681253.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:13.823Z,1509681253.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:14.227Z,1509681254.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:14.631Z,1509681254.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:15.027Z,1509681255.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:15.422Z,1509681255.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:15.826Z,1509681255.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:16.227Z,1509681256.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:16.628Z,1509681256.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:17.034Z,1509681257.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:17.417Z,1509681257.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:17.826Z,1509681257.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:18.227Z,1509681258.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:18.627Z,1509681258.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:19.027Z,1509681259.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:19.422Z,1509681259.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:19.819Z,1509681259.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:20.227Z,1509681260.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:20.678Z,1509681260.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:21.031Z,1509681261.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:21.423Z,1509681261.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:21.819Z,1509681261.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:22.278Z,1509681262.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:22.627Z,1509681262.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:23.039Z,1509681263.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:23.458Z,1509681263.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:23.827Z,1509681263.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:24.266Z,1509681264.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:24.667Z,1509681264.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:25.031Z,1509681265.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:25.422Z,1509681265.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:25.818Z,1509681265.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:26.231Z,1509681266.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:26.638Z,1509681266.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:27.035Z,1509681267.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:27.422Z,1509681267.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:27.825Z,1509681267.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:28.231Z,1509681268.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:28.627Z,1509681268.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:29.038Z,1509681269.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:29.427Z,1509681269.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:29.821Z,1509681269.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:30.234Z,1509681270.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:30.635Z,1509681270.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:31.031Z,1509681271.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:31.421Z,1509681271.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:31.820Z,1509681271.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:32.231Z,1509681272.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:32.638Z,1509681272.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:33.031Z,1509681273.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:33.422Z,1509681273.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:33.830Z,1509681273.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:34.231Z,1509681274.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:34.634Z,1509681274.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:35.042Z,1509681275.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:35.422Z,1509681275.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:35.867Z,1509681275.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:36.231Z,1509681276.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:36.690Z,1509681276.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:37.029Z,1509681277.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:37.447Z,1509681277.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:37.831Z,1509681277.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:38.266Z,1509681278.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:38.667Z,1509681278.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:39.032Z,1509681279.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:39.428Z,1509681279.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:39.831Z,1509681279.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:40.233Z,1509681280.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:40.633Z,1509681280.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:41.042Z,1509681281.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:41.429Z,1509681281.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:41.829Z,1509681281.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:42.237Z,1509681282.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:42.637Z,1509681282.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:43.032Z,1509681283.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:43.429Z,1509681283.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:43.830Z,1509681283.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:44.233Z,1509681284.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:44.642Z,1509681284.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:45.039Z,1509681285.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:45.428Z,1509681285.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:45.811Z,1509681285.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:46.239Z,1509681286.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:46.633Z,1509681286.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:47.038Z,1509681287.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:47.429Z,1509681287.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:47.834Z,1509681287.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:48.242Z,1509681288.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:48.640Z,1509681288.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:49.038Z,1509681289.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:49.456Z,1509681289.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:49.812Z,1509681289.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:50.238Z,1509681290.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:50.646Z,1509681290.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:51.064Z,1509681291.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:51.419Z,1509681291.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:51.846Z,1509681291.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:52.239Z,1509681292.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:52.667Z,1509681292.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:53.042Z,1509681293.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:53.443Z,1509681293.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:53.818Z,1509681293.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:54.241Z,1509681294.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:54.640Z,1509681294.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:55.039Z,1509681295.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:55.416Z,1509681295.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:55.810Z,1509681295.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:56.239Z,1509681296.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:56.639Z,1509681296.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:57.040Z,1509681297.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:57.411Z,1509681297.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:57.815Z,1509681297.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:58.240Z,1509681298.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:58.637Z,1509681298.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:59.043Z,1509681299.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:59.411Z,1509681299.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:54:59.810Z,1509681299.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:00.242Z,1509681300.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:00.641Z,1509681300.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:01.043Z,1509681301.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:01.415Z,1509681301.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:01.819Z,1509681301.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:01.820Z,1509681301.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:01.820Z,1509681301.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2017-11-03T03:55:01.821Z,1509681301.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:55:01.822Z,1509681301.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:01.823Z,1509681301.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2017-11-03T03:55:01.823Z,1509681301.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:55:01.934Z,1509681301.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:55:01.934Z,1509681301.934 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:55:02.245Z,1509681302.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:02.334Z,1509681302.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:55:02.334Z,1509681302.334 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2017-11-03T03:55:02.335Z,1509681302.335 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:55:02.335Z,1509681302.335 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2017-11-03T03:55:02.646Z,1509681302.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:02.646Z,1509681302.646 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2017-11-03T03:55:02.646Z,1509681302.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:55:02.647Z,1509681302.647 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:55:02.648Z,1509681302.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:55:02.648Z,1509681302.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:55:02.648Z,1509681302.648 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:55:02.649Z,1509681302.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:55:02.649Z,1509681302.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:55:02.740Z,1509681302.740 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:55:03.137Z,1509681303.137 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:55:03.137Z,1509681303.137 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2017-11-03T03:55:03.417Z,1509681303.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:55:03.417Z,1509681303.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:55:03.417Z,1509681303.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:55:03.859Z,1509681303.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:55:03.860Z,1509681303.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:04.224Z,1509681304.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:55:04.225Z,1509681304.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:04.643Z,1509681304.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:55:04.644Z,1509681304.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:05.044Z,1509681305.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:55:05.045Z,1509681305.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:08.165Z,1509681308.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T03:55:08.166Z,1509681308.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:08.327Z,1509681308.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T03:55:08.328Z,1509681308.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:08.719Z,1509681308.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T03:55:08.720Z,1509681308.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:09.126Z,1509681309.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T03:55:09.127Z,1509681309.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:09.550Z,1509681309.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T03:55:09.551Z,1509681309.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:09.907Z,1509681309.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T03:55:09.908Z,1509681309.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:10.346Z,1509681310.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T03:55:10.347Z,1509681310.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:10.707Z,1509681310.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T03:55:10.709Z,1509681310.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:11.145Z,1509681311.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T03:55:11.146Z,1509681311.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:11.522Z,1509681311.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T03:55:11.523Z,1509681311.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:11.922Z,1509681311.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T03:55:11.923Z,1509681311.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:12.326Z,1509681312.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T03:55:12.327Z,1509681312.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:12.704Z,1509681312.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T03:55:12.705Z,1509681312.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:13.109Z,1509681313.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T03:55:13.110Z,1509681313.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:13.508Z,1509681313.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T03:55:13.509Z,1509681313.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:13.914Z,1509681313.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T03:55:13.915Z,1509681313.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:14.326Z,1509681314.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T03:55:14.327Z,1509681314.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:14.726Z,1509681314.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T03:55:14.727Z,1509681314.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:15.116Z,1509681315.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T03:55:15.117Z,1509681315.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:15.514Z,1509681315.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T03:55:15.515Z,1509681315.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:15.909Z,1509681315.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T03:55:15.910Z,1509681315.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:16.314Z,1509681316.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T03:55:16.315Z,1509681316.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:16.714Z,1509681316.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T03:55:16.715Z,1509681316.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:17.110Z,1509681317.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T03:55:17.111Z,1509681317.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:17.522Z,1509681317.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T03:55:17.523Z,1509681317.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:17.926Z,1509681317.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T03:55:17.927Z,1509681317.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:18.319Z,1509681318.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T03:55:18.320Z,1509681318.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:18.714Z,1509681318.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T03:55:18.715Z,1509681318.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:19.114Z,1509681319.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T03:55:19.115Z,1509681319.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:19.510Z,1509681319.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T03:55:19.511Z,1509681319.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:19.914Z,1509681319.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T03:55:19.915Z,1509681319.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:20.319Z,1509681320.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T03:55:20.320Z,1509681320.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:20.719Z,1509681320.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T03:55:20.721Z,1509681320.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:21.119Z,1509681321.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T03:55:21.120Z,1509681321.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:21.514Z,1509681321.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T03:55:21.515Z,1509681321.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:21.910Z,1509681321.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T03:55:21.911Z,1509681321.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:22.334Z,1509681322.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T03:55:22.335Z,1509681322.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:22.710Z,1509681322.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:23.135Z,1509681323.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:23.519Z,1509681323.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:23.924Z,1509681323.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:24.357Z,1509681324.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:24.711Z,1509681324.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:25.143Z,1509681325.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:25.543Z,1509681325.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:25.913Z,1509681325.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:26.319Z,1509681326.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:26.720Z,1509681326.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:27.116Z,1509681327.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:27.515Z,1509681327.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:27.917Z,1509681327.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:28.319Z,1509681328.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:28.712Z,1509681328.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:29.112Z,1509681329.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:29.520Z,1509681329.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:29.924Z,1509681329.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:30.321Z,1509681330.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:30.712Z,1509681330.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:31.117Z,1509681331.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:31.521Z,1509681331.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:31.922Z,1509681331.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:32.318Z,1509681332.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:32.735Z,1509681332.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:33.131Z,1509681333.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:33.521Z,1509681333.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:33.921Z,1509681333.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:34.321Z,1509681334.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:34.719Z,1509681334.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:35.122Z,1509681335.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:35.525Z,1509681335.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:35.927Z,1509681335.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:36.328Z,1509681336.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:36.700Z,1509681336.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:37.106Z,1509681337.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:37.566Z,1509681337.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:37.900Z,1509681337.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:38.346Z,1509681338.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:38.732Z,1509681338.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:39.151Z,1509681339.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:39.499Z,1509681339.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:39.942Z,1509681339.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:40.311Z,1509681340.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:40.703Z,1509681340.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:41.107Z,1509681341.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:41.513Z,1509681341.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:41.917Z,1509681341.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:42.317Z,1509681342.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:42.710Z,1509681342.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:43.109Z,1509681343.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:43.509Z,1509681343.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:43.910Z,1509681343.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:44.313Z,1509681344.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:44.716Z,1509681344.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:45.113Z,1509681345.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:45.508Z,1509681345.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:45.909Z,1509681345.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:46.309Z,1509681346.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:46.703Z,1509681346.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:47.108Z,1509681347.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:47.513Z,1509681347.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:47.916Z,1509681347.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:48.319Z,1509681348.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:48.705Z,1509681348.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:49.106Z,1509681349.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:49.509Z,1509681349.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:49.909Z,1509681349.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:50.319Z,1509681350.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:50.713Z,1509681350.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:51.111Z,1509681351.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:51.509Z,1509681351.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:51.978Z,1509681351.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:52.309Z,1509681352.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:52.743Z,1509681352.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:53.108Z,1509681353.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:53.554Z,1509681353.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:53.943Z,1509681353.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:54.314Z,1509681354.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:54.723Z,1509681354.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:55.121Z,1509681355.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:55.513Z,1509681355.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:55.923Z,1509681355.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:56.331Z,1509681356.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:56.723Z,1509681356.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:57.139Z,1509681357.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:57.537Z,1509681357.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:57.942Z,1509681357.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:58.329Z,1509681358.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:58.715Z,1509681358.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:59.135Z,1509681359.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:59.514Z,1509681359.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:55:59.946Z,1509681359.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:00.339Z,1509681360.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:00.719Z,1509681360.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:01.119Z,1509681361.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:01.521Z,1509681361.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:01.903Z,1509681361.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:02.335Z,1509681362.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:02.743Z,1509681362.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:03.139Z,1509681363.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:03.536Z,1509681363.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:03.937Z,1509681363.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:04.342Z,1509681364.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:04.718Z,1509681364.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:05.119Z,1509681365.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:08.303Z,1509681368.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:08.491Z,1509681368.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:08.894Z,1509681368.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:09.302Z,1509681369.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:09.659Z,1509681369.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:10.099Z,1509681370.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:10.465Z,1509681370.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:10.902Z,1509681370.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:11.268Z,1509681371.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:11.663Z,1509681371.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:12.062Z,1509681372.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:12.464Z,1509681372.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:12.859Z,1509681372.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:13.276Z,1509681373.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:13.668Z,1509681373.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:14.071Z,1509681374.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:14.458Z,1509681374.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:14.863Z,1509681374.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:15.265Z,1509681375.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:15.657Z,1509681375.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:16.071Z,1509681376.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:16.469Z,1509681376.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:16.872Z,1509681376.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:17.272Z,1509681377.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:17.665Z,1509681377.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:18.064Z,1509681378.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:18.466Z,1509681378.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:18.865Z,1509681378.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:19.268Z,1509681379.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:19.672Z,1509681379.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:20.069Z,1509681380.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:20.462Z,1509681380.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:20.867Z,1509681380.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:21.265Z,1509681381.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:21.667Z,1509681381.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:22.066Z,1509681382.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:22.469Z,1509681382.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:22.923Z,1509681382.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:23.276Z,1509681383.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:23.710Z,1509681383.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:24.068Z,1509681384.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:24.509Z,1509681384.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:24.893Z,1509681384.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:25.277Z,1509681385.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:25.678Z,1509681385.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:26.087Z,1509681386.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:26.467Z,1509681386.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:26.865Z,1509681386.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:27.267Z,1509681387.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:27.664Z,1509681387.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:28.066Z,1509681388.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:28.473Z,1509681388.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:28.871Z,1509681388.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:29.287Z,1509681389.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:29.665Z,1509681389.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:30.105Z,1509681390.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:30.467Z,1509681390.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:30.864Z,1509681390.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:31.280Z,1509681391.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:31.676Z,1509681391.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:32.082Z,1509681392.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:32.468Z,1509681392.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:32.866Z,1509681392.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:33.269Z,1509681393.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:33.668Z,1509681393.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:34.067Z,1509681394.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:34.483Z,1509681394.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:34.876Z,1509681394.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:35.283Z,1509681395.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:35.668Z,1509681395.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:36.068Z,1509681396.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:36.469Z,1509681396.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:36.891Z,1509681396.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:37.326Z,1509681397.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:37.682Z,1509681397.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:38.076Z,1509681398.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:38.499Z,1509681398.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:38.870Z,1509681398.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:39.286Z,1509681399.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:39.685Z,1509681399.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:40.077Z,1509681400.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:40.473Z,1509681400.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:40.879Z,1509681400.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:41.283Z,1509681401.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:41.677Z,1509681401.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:42.067Z,1509681402.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:42.467Z,1509681402.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:42.867Z,1509681402.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:43.279Z,1509681403.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:43.682Z,1509681403.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:44.075Z,1509681404.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:44.463Z,1509681404.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:44.876Z,1509681404.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:45.271Z,1509681405.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:45.652Z,1509681405.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:46.023Z,1509681406.023 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T03:56:46.023Z,1509681406.023 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T03:56:46.023Z,1509681406.023 [DropWeight](ERROR): Hardware Fault
2017-11-03T03:56:46.055Z,1509681406.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:46.183Z,1509681406.183 [CBIT](INFO): Critical error at 20171103T035646
2017-11-03T03:56:46.185Z,1509681406.185 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T03:56:46.186Z,1509681406.186 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T03:56:46.484Z,1509681406.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:46.575Z,1509681406.575 [CBIT](INFO): Critical error at 20171103T035646
2017-11-03T03:56:46.887Z,1509681406.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:47.277Z,1509681407.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:47.679Z,1509681407.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:48.054Z,1509681408.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:48.455Z,1509681408.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:48.855Z,1509681408.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:49.285Z,1509681409.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:49.690Z,1509681409.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:50.088Z,1509681410.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:50.467Z,1509681410.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:50.866Z,1509681410.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:51.267Z,1509681411.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:51.717Z,1509681411.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:52.118Z,1509681412.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:52.475Z,1509681412.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:52.870Z,1509681412.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:53.303Z,1509681413.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:53.663Z,1509681413.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:54.100Z,1509681414.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:54.502Z,1509681414.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:54.863Z,1509681414.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:55.270Z,1509681415.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:55.674Z,1509681415.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:56.077Z,1509681416.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:56.464Z,1509681416.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:56.866Z,1509681416.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:57.263Z,1509681417.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:57.659Z,1509681417.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:58.070Z,1509681418.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:58.471Z,1509681418.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:58.870Z,1509681418.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:59.277Z,1509681419.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:56:59.662Z,1509681419.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:00.064Z,1509681420.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:00.470Z,1509681420.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:00.871Z,1509681420.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:01.270Z,1509681421.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:01.672Z,1509681421.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:02.071Z,1509681422.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:02.467Z,1509681422.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:02.870Z,1509681422.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:03.262Z,1509681423.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:03.664Z,1509681423.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:04.066Z,1509681424.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:04.471Z,1509681424.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:04.873Z,1509681424.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:04.876Z,1509681424.876 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T03:52:04.8Z
2017-11-03T03:57:04.876Z,1509681424.876 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T03:57:04.876Z,1509681424.876 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T03:57:05.283Z,1509681425.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:08.594Z,1509681428.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:08.709Z,1509681428.709 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20171103T001125/Courier0088.lzma
2017-11-03T03:57:08.769Z,1509681428.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:09.191Z,1509681429.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:09.511Z,1509681429.511 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0088.lzma.bak
2017-11-03T03:57:09.511Z,1509681429.511 [DataOverHttps](INFO): SBD MOMSN=5182644
2017-11-03T03:57:09.578Z,1509681429.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:10.205Z,1509681430.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:10.371Z,1509681430.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:13.507Z,1509681433.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:13.671Z,1509681433.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:14.069Z,1509681434.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:14.471Z,1509681434.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:14.868Z,1509681434.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:15.271Z,1509681435.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:18.341Z,1509681438.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:18.470Z,1509681438.470 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20171103T001125/Express0089.lzma
2017-11-03T03:57:18.531Z,1509681438.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:18.930Z,1509681438.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:19.255Z,1509681439.255 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0089.lzma.bak
2017-11-03T03:57:19.255Z,1509681439.255 [DataOverHttps](INFO): SBD MOMSN=5182649
2017-11-03T03:57:19.315Z,1509681439.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:19.915Z,1509681439.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:19.918Z,1509681439.918 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T03:57:19.918Z,1509681439.918 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T03:57:19.918Z,1509681439.918 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T03:57:20.108Z,1509681440.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:23.212Z,1509681443.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:23.364Z,1509681443.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:23.771Z,1509681443.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:24.177Z,1509681444.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:24.573Z,1509681444.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:24.967Z,1509681444.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:25.410Z,1509681445.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:25.753Z,1509681445.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:26.152Z,1509681446.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:26.599Z,1509681446.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:26.976Z,1509681446.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:27.418Z,1509681447.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:27.778Z,1509681447.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:28.151Z,1509681448.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:28.552Z,1509681448.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:28.951Z,1509681448.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:29.375Z,1509681449.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:29.775Z,1509681449.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:30.175Z,1509681450.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:30.550Z,1509681450.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:30.951Z,1509681450.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:31.350Z,1509681451.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:31.752Z,1509681451.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:32.155Z,1509681452.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:32.581Z,1509681452.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:32.979Z,1509681452.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:33.377Z,1509681453.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:33.754Z,1509681453.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:34.155Z,1509681454.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:34.579Z,1509681454.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:34.955Z,1509681454.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:35.376Z,1509681455.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:35.787Z,1509681455.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:36.182Z,1509681456.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:36.555Z,1509681456.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:36.955Z,1509681456.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:37.382Z,1509681457.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:37.751Z,1509681457.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:38.155Z,1509681458.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:38.578Z,1509681458.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:38.987Z,1509681458.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:39.376Z,1509681459.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:39.798Z,1509681459.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:40.206Z,1509681460.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:40.558Z,1509681460.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:40.958Z,1509681460.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:41.430Z,1509681461.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:41.784Z,1509681461.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:42.195Z,1509681462.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:42.567Z,1509681462.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:43.002Z,1509681463.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:43.361Z,1509681463.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:43.759Z,1509681463.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:44.163Z,1509681464.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:44.573Z,1509681464.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:45.004Z,1509681465.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:45.379Z,1509681465.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:45.761Z,1509681465.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:46.160Z,1509681466.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:46.561Z,1509681466.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:46.961Z,1509681466.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:47.371Z,1509681467.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:47.783Z,1509681467.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:48.173Z,1509681468.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:48.562Z,1509681468.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:48.960Z,1509681468.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:49.361Z,1509681469.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:49.767Z,1509681469.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:50.167Z,1509681470.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:50.573Z,1509681470.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:50.972Z,1509681470.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:51.372Z,1509681471.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:51.767Z,1509681471.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:52.165Z,1509681472.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:52.563Z,1509681472.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:52.966Z,1509681472.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:53.371Z,1509681473.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:53.776Z,1509681473.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:54.174Z,1509681474.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:54.591Z,1509681474.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:54.995Z,1509681474.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:55.373Z,1509681475.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:55.787Z,1509681475.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:56.171Z,1509681476.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:56.614Z,1509681476.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:57.009Z,1509681477.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:57.372Z,1509681477.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:57.771Z,1509681477.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:58.170Z,1509681478.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:58.568Z,1509681478.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:58.949Z,1509681478.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:59.375Z,1509681479.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:57:59.776Z,1509681479.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:00.182Z,1509681480.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:00.575Z,1509681480.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:00.955Z,1509681480.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:01.352Z,1509681481.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:01.753Z,1509681481.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:02.153Z,1509681482.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:02.577Z,1509681482.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:02.973Z,1509681482.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:02.974Z,1509681482.974 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:02.974Z,1509681482.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2017-11-03T03:58:02.974Z,1509681482.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T03:58:02.976Z,1509681482.976 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:02.977Z,1509681482.977 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2017-11-03T03:58:02.977Z,1509681482.977 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T03:58:03.057Z,1509681483.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T03:58:03.057Z,1509681483.057 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T03:58:03.380Z,1509681483.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:03.468Z,1509681483.468 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T03:58:03.469Z,1509681483.469 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2017-11-03T03:58:03.469Z,1509681483.469 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T03:58:03.469Z,1509681483.469 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2017-11-03T03:58:03.750Z,1509681483.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:03.750Z,1509681483.750 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2017-11-03T03:58:03.750Z,1509681483.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T03:58:03.751Z,1509681483.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T03:58:03.751Z,1509681483.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:58:03.751Z,1509681483.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:58:03.752Z,1509681483.752 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T03:58:03.752Z,1509681483.752 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:58:03.753Z,1509681483.753 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:58:03.908Z,1509681483.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T03:58:04.257Z,1509681484.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T03:58:04.257Z,1509681484.257 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2017-11-03T03:58:04.558Z,1509681484.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T03:58:04.559Z,1509681484.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T03:58:04.559Z,1509681484.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T03:58:04.962Z,1509681484.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T03:58:04.963Z,1509681484.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:05.388Z,1509681485.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T03:58:05.389Z,1509681485.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:05.787Z,1509681485.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T03:58:05.788Z,1509681485.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:06.185Z,1509681486.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T03:58:06.186Z,1509681486.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:06.554Z,1509681486.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T03:58:06.555Z,1509681486.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:06.954Z,1509681486.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T03:58:06.955Z,1509681486.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:07.362Z,1509681487.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T03:58:07.363Z,1509681487.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:07.756Z,1509681487.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T03:58:07.757Z,1509681487.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:08.155Z,1509681488.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T03:58:08.156Z,1509681488.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:08.586Z,1509681488.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T03:58:08.587Z,1509681488.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:08.998Z,1509681488.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T03:58:08.999Z,1509681488.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:09.413Z,1509681489.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T03:58:09.414Z,1509681489.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:09.758Z,1509681489.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T03:58:09.759Z,1509681489.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:09.853Z,1509681489.853 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T03:58:09.853Z,1509681489.853 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T03:58:10.100Z,1509681490.100 [Rowe_600LCM](INFO): Initializing
2017-11-03T03:58:10.101Z,1509681490.101 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T03:58:10.101Z,1509681490.101 [Rowe_600LCM](INFO): LCM OK
2017-11-03T03:58:10.101Z,1509681490.101 [Rowe_600LCM](INFO): Powering up
2017-11-03T03:58:10.194Z,1509681490.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T03:58:10.195Z,1509681490.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:10.560Z,1509681490.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T03:58:10.561Z,1509681490.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:10.995Z,1509681490.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T03:58:10.996Z,1509681490.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:11.405Z,1509681491.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T03:58:11.406Z,1509681491.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:11.771Z,1509681491.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T03:58:11.771Z,1509681491.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:12.178Z,1509681492.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T03:58:12.179Z,1509681492.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:12.560Z,1509681492.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T03:58:12.561Z,1509681492.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:12.959Z,1509681492.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T03:58:12.960Z,1509681492.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:13.358Z,1509681493.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T03:58:13.359Z,1509681493.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:13.760Z,1509681493.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T03:58:13.761Z,1509681493.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:14.205Z,1509681494.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T03:58:14.206Z,1509681494.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:14.316Z,1509681494.316 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T03:58:14.379Z,1509681494.379 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T03:58:14.380Z,1509681494.380 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T03:58:14.385Z,1509681494.385 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T03:58:14.386Z,1509681494.386 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T03:58:14.577Z,1509681494.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T03:58:14.578Z,1509681494.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:14.975Z,1509681494.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:15.375Z,1509681495.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:15.760Z,1509681495.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:16.160Z,1509681496.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:16.561Z,1509681496.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:16.959Z,1509681496.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:17.375Z,1509681497.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:17.775Z,1509681497.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:18.179Z,1509681498.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:18.559Z,1509681498.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:18.958Z,1509681498.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:19.359Z,1509681499.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:19.759Z,1509681499.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:20.161Z,1509681500.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:20.576Z,1509681500.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:24.011Z,1509681504.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:24.185Z,1509681504.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:24.565Z,1509681504.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:24.999Z,1509681504.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:25.363Z,1509681505.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:25.811Z,1509681505.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:26.211Z,1509681506.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:26.629Z,1509681506.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:26.977Z,1509681506.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:27.373Z,1509681507.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:27.773Z,1509681507.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:28.175Z,1509681508.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:28.576Z,1509681508.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:28.976Z,1509681508.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:29.376Z,1509681509.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:29.771Z,1509681509.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:30.182Z,1509681510.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:30.573Z,1509681510.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:30.984Z,1509681510.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:31.376Z,1509681511.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:31.776Z,1509681511.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:32.180Z,1509681512.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:32.572Z,1509681512.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:32.974Z,1509681512.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:33.374Z,1509681513.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:33.774Z,1509681513.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:34.235Z,1509681514.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:34.581Z,1509681514.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:34.977Z,1509681514.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:35.374Z,1509681515.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:35.775Z,1509681515.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:36.177Z,1509681516.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:36.610Z,1509681516.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:36.976Z,1509681516.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:37.372Z,1509681517.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:37.772Z,1509681517.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:38.242Z,1509681518.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:38.586Z,1509681518.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:39.011Z,1509681519.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:39.375Z,1509681519.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:39.811Z,1509681519.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:40.203Z,1509681520.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:40.579Z,1509681520.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:40.979Z,1509681520.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:41.375Z,1509681521.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:41.774Z,1509681521.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:42.181Z,1509681522.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:42.580Z,1509681522.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:42.987Z,1509681522.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:43.373Z,1509681523.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:43.775Z,1509681523.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:44.206Z,1509681524.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:44.579Z,1509681524.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:44.980Z,1509681524.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:45.375Z,1509681525.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:45.779Z,1509681525.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:46.181Z,1509681526.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:46.587Z,1509681526.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:46.979Z,1509681526.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:47.379Z,1509681527.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:47.771Z,1509681527.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:48.235Z,1509681528.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:48.579Z,1509681528.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:48.983Z,1509681528.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:49.371Z,1509681529.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:49.771Z,1509681529.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:50.179Z,1509681530.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:50.584Z,1509681530.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:50.979Z,1509681530.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:51.374Z,1509681531.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:51.815Z,1509681531.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:52.227Z,1509681532.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:52.613Z,1509681532.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:53.015Z,1509681533.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:53.382Z,1509681533.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:53.810Z,1509681533.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:54.219Z,1509681534.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:54.584Z,1509681534.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:54.987Z,1509681534.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:55.371Z,1509681535.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:55.771Z,1509681535.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:56.187Z,1509681536.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:56.586Z,1509681536.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:56.990Z,1509681536.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:57.371Z,1509681537.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:57.775Z,1509681537.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:58.215Z,1509681538.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:58.587Z,1509681538.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:58.987Z,1509681538.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:59.371Z,1509681539.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:58:59.771Z,1509681539.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:00.185Z,1509681540.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:00.590Z,1509681540.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:00.983Z,1509681540.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:01.371Z,1509681541.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:01.773Z,1509681541.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:02.234Z,1509681542.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:02.583Z,1509681542.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:02.984Z,1509681542.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:03.373Z,1509681543.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:03.772Z,1509681543.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:04.191Z,1509681544.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:04.589Z,1509681544.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:04.984Z,1509681544.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:05.373Z,1509681545.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:05.830Z,1509681545.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:06.226Z,1509681546.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:06.591Z,1509681546.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:07.022Z,1509681547.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:07.379Z,1509681547.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:07.803Z,1509681547.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:08.230Z,1509681548.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:08.584Z,1509681548.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:08.986Z,1509681548.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:09.375Z,1509681549.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:09.775Z,1509681549.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:10.183Z,1509681550.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:10.584Z,1509681550.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:10.984Z,1509681550.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:11.385Z,1509681551.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:11.773Z,1509681551.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:12.183Z,1509681552.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:12.582Z,1509681552.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:12.973Z,1509681552.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:13.385Z,1509681553.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:13.784Z,1509681553.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:14.188Z,1509681554.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:14.581Z,1509681554.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:14.973Z,1509681554.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:15.373Z,1509681555.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:15.772Z,1509681555.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:16.249Z,1509681556.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:16.585Z,1509681556.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:16.984Z,1509681556.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:17.382Z,1509681557.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:17.787Z,1509681557.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:18.164Z,1509681558.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:18.589Z,1509681558.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:18.984Z,1509681558.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:19.387Z,1509681559.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:19.782Z,1509681559.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:20.234Z,1509681560.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:20.593Z,1509681560.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:23.819Z,1509681563.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:24.047Z,1509681564.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:24.451Z,1509681564.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:24.851Z,1509681564.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:25.203Z,1509681565.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:25.603Z,1509681565.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:26.048Z,1509681566.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:26.423Z,1509681566.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:26.822Z,1509681566.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:27.219Z,1509681567.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:27.604Z,1509681567.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:28.059Z,1509681568.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:28.409Z,1509681568.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:28.804Z,1509681568.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:29.216Z,1509681569.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:29.612Z,1509681569.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:30.023Z,1509681570.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:30.403Z,1509681570.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:30.806Z,1509681570.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:31.219Z,1509681571.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:31.616Z,1509681571.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:32.022Z,1509681572.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:32.402Z,1509681572.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:32.832Z,1509681572.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:33.231Z,1509681573.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:33.628Z,1509681573.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:34.030Z,1509681574.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:34.398Z,1509681574.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:34.801Z,1509681574.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:35.233Z,1509681575.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:35.635Z,1509681575.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:36.036Z,1509681576.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:36.403Z,1509681576.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:36.885Z,1509681576.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:37.219Z,1509681577.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:37.650Z,1509681577.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:38.048Z,1509681578.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:38.443Z,1509681578.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:38.842Z,1509681578.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:39.206Z,1509681579.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:39.603Z,1509681579.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:40.043Z,1509681580.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:40.417Z,1509681580.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:40.823Z,1509681580.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:41.223Z,1509681581.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:41.604Z,1509681581.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:42.072Z,1509681582.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:42.405Z,1509681582.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:42.805Z,1509681582.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:43.215Z,1509681583.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:43.623Z,1509681583.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:44.018Z,1509681584.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:44.407Z,1509681584.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:44.814Z,1509681584.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:45.216Z,1509681585.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:45.623Z,1509681585.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:46.019Z,1509681586.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:46.414Z,1509681586.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:46.815Z,1509681586.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:47.223Z,1509681587.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:47.627Z,1509681587.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:48.023Z,1509681588.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:48.396Z,1509681588.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:48.839Z,1509681588.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:49.223Z,1509681589.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:49.619Z,1509681589.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:50.028Z,1509681590.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:50.411Z,1509681590.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:50.847Z,1509681590.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:51.258Z,1509681591.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:51.627Z,1509681591.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:52.067Z,1509681592.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:52.419Z,1509681592.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:52.835Z,1509681592.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:53.255Z,1509681593.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:53.622Z,1509681593.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:54.049Z,1509681594.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:54.405Z,1509681594.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:54.808Z,1509681594.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:55.211Z,1509681595.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:55.604Z,1509681595.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:56.106Z,1509681596.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:56.422Z,1509681596.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:56.821Z,1509681596.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:57.222Z,1509681597.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:57.599Z,1509681597.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:58.023Z,1509681598.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:58.402Z,1509681598.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:58.798Z,1509681598.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:59.220Z,1509681599.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T03:59:59.630Z,1509681599.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:00.022Z,1509681600.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:00.399Z,1509681600.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:00.807Z,1509681600.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:01.211Z,1509681601.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:01.611Z,1509681601.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:02.011Z,1509681602.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:02.411Z,1509681602.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:02.802Z,1509681602.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:03.215Z,1509681603.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:03.619Z,1509681603.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:04.045Z,1509681604.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:04.406Z,1509681604.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:04.847Z,1509681604.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:05.266Z,1509681605.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:05.618Z,1509681605.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:06.098Z,1509681606.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:06.405Z,1509681606.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:06.846Z,1509681606.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:07.245Z,1509681607.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:07.605Z,1509681607.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:08.042Z,1509681608.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:08.423Z,1509681608.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:08.823Z,1509681608.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:09.223Z,1509681609.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:09.609Z,1509681609.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:10.061Z,1509681610.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:10.407Z,1509681610.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:10.804Z,1509681610.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:11.217Z,1509681611.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:11.614Z,1509681611.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:12.022Z,1509681612.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:12.416Z,1509681612.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:12.815Z,1509681612.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:13.216Z,1509681613.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:13.623Z,1509681613.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:14.020Z,1509681614.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:14.418Z,1509681614.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:14.814Z,1509681614.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:15.223Z,1509681615.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:15.627Z,1509681615.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:16.023Z,1509681616.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:16.408Z,1509681616.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:16.803Z,1509681616.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:17.227Z,1509681617.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:17.626Z,1509681617.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:18.041Z,1509681618.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:18.400Z,1509681618.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:18.807Z,1509681618.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:19.263Z,1509681619.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:19.601Z,1509681619.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:20.039Z,1509681620.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:20.451Z,1509681620.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:20.818Z,1509681620.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:24.059Z,1509681624.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:24.081Z,1509681624.081 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:00:24.081Z,1509681624.081 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T04:00:24.081Z,1509681624.081 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:00:24.181Z,1509681624.181 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:00:24.282Z,1509681624.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.2 s old, using for 20.0 s.
2017-11-03T04:00:24.283Z,1509681624.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:24.484Z,1509681624.484 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:00:24.579Z,1509681624.579 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:00:24.651Z,1509681624.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.6 s old, using for 20.0 s.
2017-11-03T04:00:24.652Z,1509681624.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:25.051Z,1509681625.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-03T04:00:25.052Z,1509681625.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:25.463Z,1509681625.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-03T04:00:25.464Z,1509681625.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:25.864Z,1509681625.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T04:00:25.865Z,1509681625.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:25.969Z,1509681625.969 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:00:25.969Z,1509681625.969 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T04:00:26.197Z,1509681626.197 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:00:26.197Z,1509681626.197 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:00:26.197Z,1509681626.197 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:00:26.197Z,1509681626.197 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:00:26.280Z,1509681626.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-03T04:00:26.281Z,1509681626.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:26.631Z,1509681626.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-03T04:00:26.632Z,1509681626.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:27.038Z,1509681627.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-03T04:00:27.039Z,1509681627.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:27.435Z,1509681627.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T04:00:27.436Z,1509681627.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:27.835Z,1509681627.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T04:00:27.836Z,1509681627.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:28.262Z,1509681628.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T04:00:28.263Z,1509681628.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:28.664Z,1509681628.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T04:00:28.665Z,1509681628.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:29.061Z,1509681629.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T04:00:29.062Z,1509681629.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:29.482Z,1509681629.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T04:00:29.483Z,1509681629.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:29.834Z,1509681629.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T04:00:29.835Z,1509681629.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:30.235Z,1509681630.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T04:00:30.236Z,1509681630.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:30.391Z,1509681630.391 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:00:30.455Z,1509681630.455 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:00:30.461Z,1509681630.461 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:00:30.462Z,1509681630.462 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:00:30.463Z,1509681630.463 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:00:30.642Z,1509681630.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T04:00:30.643Z,1509681630.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:31.043Z,1509681631.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:31.451Z,1509681631.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:31.851Z,1509681631.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:32.248Z,1509681632.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:32.647Z,1509681632.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:33.049Z,1509681633.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:33.450Z,1509681633.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:33.849Z,1509681633.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:34.261Z,1509681634.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:34.664Z,1509681634.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:35.063Z,1509681635.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:35.435Z,1509681635.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:35.835Z,1509681635.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:36.275Z,1509681636.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:36.639Z,1509681636.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:37.070Z,1509681637.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:37.441Z,1509681637.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:37.883Z,1509681637.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:38.278Z,1509681638.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:38.643Z,1509681638.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:39.040Z,1509681639.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:39.442Z,1509681639.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:39.840Z,1509681639.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:40.248Z,1509681640.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:40.652Z,1509681640.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:41.051Z,1509681641.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:41.441Z,1509681641.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:41.841Z,1509681641.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:42.246Z,1509681642.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:42.647Z,1509681642.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:43.041Z,1509681643.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:43.449Z,1509681643.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:43.852Z,1509681643.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:44.272Z,1509681644.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:44.644Z,1509681644.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:45.042Z,1509681645.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:45.443Z,1509681645.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:45.835Z,1509681645.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:46.259Z,1509681646.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:46.658Z,1509681646.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:47.053Z,1509681647.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:47.443Z,1509681647.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:47.854Z,1509681647.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:48.231Z,1509681648.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:48.650Z,1509681648.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:49.071Z,1509681649.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:49.459Z,1509681649.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:49.856Z,1509681649.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:50.302Z,1509681650.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:50.638Z,1509681650.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:51.078Z,1509681651.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:51.442Z,1509681651.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:51.875Z,1509681651.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:52.286Z,1509681652.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:52.654Z,1509681652.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:53.059Z,1509681653.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:53.443Z,1509681653.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:53.910Z,1509681653.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:54.240Z,1509681654.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:54.639Z,1509681654.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:55.047Z,1509681655.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:55.479Z,1509681655.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:55.877Z,1509681655.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:56.283Z,1509681656.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:56.647Z,1509681656.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:57.070Z,1509681657.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:57.463Z,1509681657.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:57.848Z,1509681657.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:58.277Z,1509681658.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:58.659Z,1509681658.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:59.052Z,1509681659.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:59.449Z,1509681659.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:00:59.873Z,1509681659.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:00.270Z,1509681660.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:00.656Z,1509681660.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:01.068Z,1509681661.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:01.466Z,1509681661.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:01.871Z,1509681661.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:02.243Z,1509681662.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:02.723Z,1509681662.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:03.051Z,1509681663.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:03.463Z,1509681663.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:03.881Z,1509681663.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:03.883Z,1509681663.883 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:03.883Z,1509681663.883 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2017-11-03T04:01:03.883Z,1509681663.883 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:01:03.946Z,1509681663.946 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:03.946Z,1509681663.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2017-11-03T04:01:03.946Z,1509681663.946 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:01:04.069Z,1509681664.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:01:04.069Z,1509681664.069 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:01:04.343Z,1509681664.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:04.457Z,1509681664.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:01:04.457Z,1509681664.457 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2017-11-03T04:01:04.457Z,1509681664.457 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:01:04.457Z,1509681664.457 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2017-11-03T04:01:04.703Z,1509681664.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:04.703Z,1509681664.703 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2017-11-03T04:01:04.703Z,1509681664.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:01:04.728Z,1509681664.728 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:01:04.729Z,1509681664.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:01:04.729Z,1509681664.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:01:04.730Z,1509681664.730 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:01:04.730Z,1509681664.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:01:04.730Z,1509681664.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:01:04.821Z,1509681664.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:01:05.181Z,1509681665.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:01:05.181Z,1509681665.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2017-11-03T04:01:05.443Z,1509681665.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:01:05.444Z,1509681665.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:01:05.444Z,1509681665.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:01:05.894Z,1509681665.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:06.299Z,1509681666.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:06.666Z,1509681666.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:07.053Z,1509681667.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:07.458Z,1509681667.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:07.867Z,1509681667.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:08.272Z,1509681668.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:08.667Z,1509681668.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:09.039Z,1509681669.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:09.439Z,1509681669.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:09.843Z,1509681669.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:10.267Z,1509681670.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:10.664Z,1509681670.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:11.062Z,1509681671.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:11.436Z,1509681671.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:11.835Z,1509681671.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:12.275Z,1509681672.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:12.636Z,1509681672.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:13.031Z,1509681673.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:13.463Z,1509681673.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:13.863Z,1509681673.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:14.265Z,1509681674.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:14.639Z,1509681674.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:15.035Z,1509681675.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:15.438Z,1509681675.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:15.835Z,1509681675.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:16.265Z,1509681676.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:16.695Z,1509681676.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:17.044Z,1509681677.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:17.443Z,1509681677.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:17.879Z,1509681677.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:18.240Z,1509681678.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:18.641Z,1509681678.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:19.067Z,1509681679.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:19.459Z,1509681679.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:19.890Z,1509681679.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:20.290Z,1509681680.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:20.645Z,1509681680.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:21.055Z,1509681681.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:24.313Z,1509681684.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:24.474Z,1509681684.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:24.867Z,1509681684.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:25.269Z,1509681685.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:25.663Z,1509681685.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:26.057Z,1509681686.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:26.459Z,1509681686.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:26.857Z,1509681686.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:27.268Z,1509681687.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:27.675Z,1509681687.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:28.067Z,1509681688.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:28.548Z,1509681688.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:28.857Z,1509681688.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:29.258Z,1509681689.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:29.657Z,1509681689.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:30.058Z,1509681690.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:30.525Z,1509681690.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:30.897Z,1509681690.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:31.307Z,1509681691.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:31.651Z,1509681691.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:32.071Z,1509681692.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:32.449Z,1509681692.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:32.885Z,1509681692.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:33.261Z,1509681693.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:33.687Z,1509681693.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:34.091Z,1509681694.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:34.503Z,1509681694.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:34.860Z,1509681694.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:35.250Z,1509681695.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:35.651Z,1509681695.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:36.051Z,1509681696.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:36.465Z,1509681696.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:36.867Z,1509681696.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:37.254Z,1509681697.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:37.657Z,1509681697.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:38.106Z,1509681698.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:38.455Z,1509681698.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:38.851Z,1509681698.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:39.261Z,1509681699.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:39.659Z,1509681699.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:40.059Z,1509681700.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:40.459Z,1509681700.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:40.852Z,1509681700.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:41.258Z,1509681701.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:41.657Z,1509681701.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:42.062Z,1509681702.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:42.512Z,1509681702.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:42.863Z,1509681702.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:43.265Z,1509681703.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:43.660Z,1509681703.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:44.059Z,1509681704.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:44.496Z,1509681704.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:44.618Z,1509681704.618 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T04:01:44.851Z,1509681704.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:45.303Z,1509681705.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:45.686Z,1509681705.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:46.099Z,1509681706.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:46.455Z,1509681706.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:46.883Z,1509681706.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:47.251Z,1509681707.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:47.691Z,1509681707.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:48.091Z,1509681708.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:48.464Z,1509681708.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:48.864Z,1509681708.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:49.286Z,1509681709.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:49.654Z,1509681709.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:50.058Z,1509681710.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:50.455Z,1509681710.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:50.854Z,1509681710.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:51.260Z,1509681711.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:51.667Z,1509681711.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:52.101Z,1509681712.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:52.481Z,1509681712.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:52.859Z,1509681712.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:53.259Z,1509681713.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:53.655Z,1509681713.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:54.055Z,1509681714.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:54.486Z,1509681714.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:54.868Z,1509681714.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:55.290Z,1509681715.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:55.654Z,1509681715.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:56.059Z,1509681716.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:56.538Z,1509681716.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:56.885Z,1509681716.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:57.261Z,1509681717.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:57.661Z,1509681717.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:58.091Z,1509681718.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:58.514Z,1509681718.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:58.899Z,1509681718.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:59.255Z,1509681719.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:01:59.698Z,1509681719.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:00.050Z,1509681720.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:00.495Z,1509681720.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:00.864Z,1509681720.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:01.298Z,1509681721.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:01.698Z,1509681721.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:02.059Z,1509681722.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:02.456Z,1509681722.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:02.857Z,1509681722.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:03.263Z,1509681723.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:03.662Z,1509681723.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:04.075Z,1509681724.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:04.463Z,1509681724.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:04.856Z,1509681724.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:05.256Z,1509681725.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:05.655Z,1509681725.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:06.109Z,1509681726.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:06.467Z,1509681726.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:06.867Z,1509681726.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:07.269Z,1509681727.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:07.656Z,1509681727.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:08.058Z,1509681728.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:08.464Z,1509681728.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:08.857Z,1509681728.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:09.268Z,1509681729.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:09.669Z,1509681729.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:10.075Z,1509681730.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:10.531Z,1509681730.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:10.859Z,1509681730.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:11.258Z,1509681731.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:11.663Z,1509681731.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:12.060Z,1509681732.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:12.629Z,1509681732.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:12.867Z,1509681732.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:13.270Z,1509681733.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:13.668Z,1509681733.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:14.065Z,1509681734.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:14.486Z,1509681734.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:14.843Z,1509681734.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:15.311Z,1509681735.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:15.675Z,1509681735.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:16.111Z,1509681736.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:16.447Z,1509681736.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:16.869Z,1509681736.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:17.267Z,1509681737.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:17.648Z,1509681737.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:18.072Z,1509681738.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:18.475Z,1509681738.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:18.879Z,1509681738.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:19.284Z,1509681739.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:19.647Z,1509681739.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:20.087Z,1509681740.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:20.452Z,1509681740.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:20.455Z,1509681740.455 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T04:02:20.455Z,1509681740.455 [Default:CheckIn:C.Wait] Stopped
2017-11-03T04:02:20.455Z,1509681740.455 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T04:02:20.455Z,1509681740.455 [Default:CheckIn:D] Running Loop=1
2017-11-03T04:02:20.851Z,1509681740.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:20.855Z,1509681740.855 [Default:CheckIn:D] Stopped
2017-11-03T04:02:20.855Z,1509681740.855 [Default:CheckIn:E] Running Loop=1
2017-11-03T04:02:21.283Z,1509681741.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:21.286Z,1509681741.286 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.221468 min 
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn:E] Stopped
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn] Stopped
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn](INFO): Running loop #23
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn] Running Loop=23
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T04:02:21.287Z,1509681741.287 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T04:02:24.546Z,1509681744.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:24.719Z,1509681744.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:25.099Z,1509681745.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:25.500Z,1509681745.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:25.892Z,1509681745.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:26.311Z,1509681746.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:26.518Z,1509681746.518 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:02:26.518Z,1509681746.518 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T04:02:26.518Z,1509681746.518 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:02:26.751Z,1509681746.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:02:26.752Z,1509681746.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:26.833Z,1509681746.833 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:02:26.920Z,1509681746.920 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:02:27.007Z,1509681747.007 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:02:27.109Z,1509681747.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:02:27.110Z,1509681747.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:27.500Z,1509681747.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:02:27.501Z,1509681747.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:27.907Z,1509681747.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:02:27.908Z,1509681747.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:28.292Z,1509681748.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:02:28.293Z,1509681748.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:28.388Z,1509681748.388 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:02:28.389Z,1509681748.389 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T04:02:28.626Z,1509681748.626 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:02:28.627Z,1509681748.627 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:02:28.627Z,1509681748.627 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:02:28.627Z,1509681748.627 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:02:28.707Z,1509681748.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:02:28.708Z,1509681748.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:29.106Z,1509681749.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:02:29.107Z,1509681749.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:29.504Z,1509681749.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:02:29.505Z,1509681749.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:29.946Z,1509681749.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:02:29.946Z,1509681749.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:30.327Z,1509681750.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:02:30.340Z,1509681750.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:30.695Z,1509681750.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:02:30.697Z,1509681750.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:31.096Z,1509681751.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:02:31.097Z,1509681751.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:31.496Z,1509681751.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:02:31.497Z,1509681751.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:31.895Z,1509681751.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:02:31.896Z,1509681751.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:32.310Z,1509681752.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:02:32.311Z,1509681752.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:32.763Z,1509681752.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T04:02:32.764Z,1509681752.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:32.858Z,1509681752.858 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:02:32.947Z,1509681752.947 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:02:32.948Z,1509681752.948 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:02:32.949Z,1509681752.949 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:02:32.949Z,1509681752.949 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:02:33.110Z,1509681753.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:02:33.111Z,1509681753.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:33.508Z,1509681753.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:33.904Z,1509681753.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:34.304Z,1509681754.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:34.712Z,1509681754.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:35.083Z,1509681755.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:35.534Z,1509681755.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:35.967Z,1509681755.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:36.308Z,1509681756.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:36.683Z,1509681756.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:37.083Z,1509681757.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:37.483Z,1509681757.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:37.882Z,1509681757.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:38.308Z,1509681758.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:38.712Z,1509681758.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:39.114Z,1509681759.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:39.491Z,1509681759.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:39.886Z,1509681759.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:40.291Z,1509681760.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:40.743Z,1509681760.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:41.097Z,1509681761.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:41.503Z,1509681761.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:41.983Z,1509681761.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:42.304Z,1509681762.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:42.728Z,1509681762.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:43.099Z,1509681763.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:43.532Z,1509681763.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:43.899Z,1509681763.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:44.301Z,1509681764.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:44.711Z,1509681764.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:45.104Z,1509681765.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:45.492Z,1509681765.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:45.893Z,1509681765.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:46.303Z,1509681766.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:46.697Z,1509681766.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:47.090Z,1509681767.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:47.451Z,1509681767.451 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T04:02:47.451Z,1509681767.451 [NAL9602] Data Fault, FailCount= 1
2017-11-03T04:02:47.451Z,1509681767.451 [NAL9602](ERROR): Data Fault
2017-11-03T04:02:47.511Z,1509681767.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:47.625Z,1509681767.625 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T04:02:47.854Z,1509681767.854 [NAL9602](INFO): Powering down
2017-11-03T04:02:47.901Z,1509681767.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:48.297Z,1509681768.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:48.693Z,1509681768.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:48.781Z,1509681768.781 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T04:02:48.781Z,1509681768.781 [NAL9602] No Fault, FailCount= 1
2017-11-03T04:02:49.099Z,1509681769.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:49.492Z,1509681769.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:49.895Z,1509681769.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:50.291Z,1509681770.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:50.707Z,1509681770.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:51.093Z,1509681771.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:51.492Z,1509681771.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:51.949Z,1509681771.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:52.300Z,1509681772.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:52.700Z,1509681772.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:53.102Z,1509681773.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:53.500Z,1509681773.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:53.973Z,1509681773.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:54.331Z,1509681774.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:54.687Z,1509681774.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:55.091Z,1509681775.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:55.514Z,1509681775.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:55.881Z,1509681775.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:56.324Z,1509681776.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:56.715Z,1509681776.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:57.092Z,1509681777.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:57.492Z,1509681777.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:57.891Z,1509681777.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:58.292Z,1509681778.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:58.692Z,1509681778.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:59.087Z,1509681779.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:59.488Z,1509681779.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:02:59.892Z,1509681779.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:00.296Z,1509681780.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:00.688Z,1509681780.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:01.090Z,1509681781.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:01.499Z,1509681781.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:01.892Z,1509681781.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:02.291Z,1509681782.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:02.689Z,1509681782.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:03.091Z,1509681783.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:03.490Z,1509681783.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:03.891Z,1509681783.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:04.293Z,1509681784.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:04.692Z,1509681784.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:05.096Z,1509681785.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:05.491Z,1509681785.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:05.947Z,1509681785.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:06.292Z,1509681786.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:06.692Z,1509681786.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:07.092Z,1509681787.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:07.514Z,1509681787.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:07.950Z,1509681787.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:08.294Z,1509681788.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:08.698Z,1509681788.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:09.146Z,1509681789.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:09.496Z,1509681789.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:09.982Z,1509681789.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:10.293Z,1509681790.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:10.735Z,1509681790.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:11.115Z,1509681791.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:11.495Z,1509681791.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:11.899Z,1509681791.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:12.297Z,1509681792.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:12.692Z,1509681792.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:13.094Z,1509681793.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:13.487Z,1509681793.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:13.892Z,1509681793.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:14.300Z,1509681794.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:14.696Z,1509681794.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:15.093Z,1509681795.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:15.496Z,1509681795.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:15.896Z,1509681795.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:16.293Z,1509681796.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:16.696Z,1509681796.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:17.096Z,1509681797.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:17.494Z,1509681797.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:17.895Z,1509681797.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:18.247Z,1509681798.247 [NAL9602](INFO): Powering up NAL9602
2017-11-03T04:03:18.305Z,1509681798.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:18.696Z,1509681798.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:19.096Z,1509681799.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:19.490Z,1509681799.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:19.954Z,1509681799.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:20.300Z,1509681800.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:20.701Z,1509681800.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:21.098Z,1509681801.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:21.527Z,1509681801.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:24.771Z,1509681804.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:24.910Z,1509681804.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:25.357Z,1509681805.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:25.723Z,1509681805.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:26.142Z,1509681806.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:26.542Z,1509681806.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:26.920Z,1509681806.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:27.320Z,1509681807.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:27.718Z,1509681807.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:28.097Z,1509681808.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:28.530Z,1509681808.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:28.920Z,1509681808.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:29.262Z,1509681809.262 [NAL9602](INFO): NAL9602 initialized
2017-11-03T04:03:29.330Z,1509681809.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:29.689Z,1509681809.689 [PNI_TCM](ERROR): CRC does not match. Expected:0x42917 got:0x55047
2017-11-03T04:03:29.730Z,1509681809.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:30.122Z,1509681810.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:30.575Z,1509681810.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:30.922Z,1509681810.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:31.303Z,1509681811.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:31.722Z,1509681811.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:32.126Z,1509681812.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:32.573Z,1509681812.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:32.929Z,1509681812.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:33.325Z,1509681813.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:33.706Z,1509681813.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x12723 got:0x139
2017-11-03T04:03:33.729Z,1509681813.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:34.103Z,1509681814.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:34.507Z,1509681814.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:34.925Z,1509681814.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:35.304Z,1509681815.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:35.702Z,1509681815.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:36.132Z,1509681816.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:36.535Z,1509681816.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:36.906Z,1509681816.906 [PNI_TCM](ERROR): CRC does not match. Expected:0x20401 got:0x56132
2017-11-03T04:03:36.928Z,1509681816.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:37.302Z,1509681817.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:37.750Z,1509681817.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:38.130Z,1509681818.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:38.550Z,1509681818.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:38.914Z,1509681818.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:39.347Z,1509681819.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:39.735Z,1509681819.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:40.102Z,1509681820.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x45562 got:0x29277
2017-11-03T04:03:40.154Z,1509681820.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:40.546Z,1509681820.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:40.913Z,1509681820.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:41.323Z,1509681821.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:41.710Z,1509681821.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:42.116Z,1509681822.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:42.521Z,1509681822.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:42.953Z,1509681822.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:43.314Z,1509681823.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:43.713Z,1509681823.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:44.108Z,1509681824.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:44.567Z,1509681824.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:44.927Z,1509681824.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:45.321Z,1509681825.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:45.723Z,1509681825.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:46.123Z,1509681826.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:46.540Z,1509681826.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:46.922Z,1509681826.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:47.298Z,1509681827.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:47.724Z,1509681827.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:48.121Z,1509681828.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:48.518Z,1509681828.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:48.915Z,1509681828.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:49.330Z,1509681829.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:49.717Z,1509681829.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:50.122Z,1509681830.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:50.497Z,1509681830.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:50.922Z,1509681830.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:51.303Z,1509681831.303 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T04:03:51.350Z,1509681831.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:51.713Z,1509681831.713 [PNI_TCM](ERROR): CRC does not match. Expected:0x55277 got:0x49596
2017-11-03T04:03:51.735Z,1509681831.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:52.125Z,1509681832.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:52.550Z,1509681832.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:52.903Z,1509681832.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:53.303Z,1509681833.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:53.730Z,1509681833.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:54.135Z,1509681834.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:54.571Z,1509681834.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:54.943Z,1509681834.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:55.306Z,1509681835.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:55.725Z,1509681835.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:56.107Z,1509681836.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:56.505Z,1509681836.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:56.919Z,1509681836.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:57.334Z,1509681837.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:57.705Z,1509681837.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x13692 got:0x37403
2017-11-03T04:03:57.738Z,1509681837.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:58.107Z,1509681838.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:58.543Z,1509681838.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:58.932Z,1509681838.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:59.311Z,1509681839.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:03:59.703Z,1509681839.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:00.114Z,1509681840.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:00.562Z,1509681840.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:00.919Z,1509681840.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:01.315Z,1509681841.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:01.708Z,1509681841.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:02.119Z,1509681842.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:02.508Z,1509681842.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:02.919Z,1509681842.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:03.319Z,1509681843.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:03.738Z,1509681843.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:04.133Z,1509681844.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:04.498Z,1509681844.498 [PNI_TCM](ERROR): CRC does not match. Expected:0x18757 got:0x17074
2017-11-03T04:04:04.537Z,1509681844.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:04.914Z,1509681844.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:04.915Z,1509681844.915 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:04.915Z,1509681844.915 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2017-11-03T04:04:04.915Z,1509681844.915 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:04:04.918Z,1509681844.918 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:04.918Z,1509681844.918 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2017-11-03T04:04:04.918Z,1509681844.918 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:04:05.028Z,1509681845.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:04:05.028Z,1509681845.028 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:04:05.323Z,1509681845.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:05.430Z,1509681845.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:04:05.430Z,1509681845.430 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2017-11-03T04:04:05.430Z,1509681845.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:04:05.430Z,1509681845.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2017-11-03T04:04:05.754Z,1509681845.754 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:05.754Z,1509681845.754 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2017-11-03T04:04:05.754Z,1509681845.754 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:04:05.755Z,1509681845.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:04:05.756Z,1509681845.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:04:05.756Z,1509681845.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:04:05.756Z,1509681845.756 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:04:05.757Z,1509681845.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:04:05.757Z,1509681845.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:04:05.845Z,1509681845.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:04:06.216Z,1509681846.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:04:06.216Z,1509681846.216 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2017-11-03T04:04:06.519Z,1509681846.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:04:06.519Z,1509681846.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:04:06.519Z,1509681846.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:04:06.969Z,1509681846.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:07.303Z,1509681847.303 [PNI_TCM](ERROR): CRC does not match. Expected:0x52898 got:0x25095
2017-11-03T04:04:07.330Z,1509681847.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:07.702Z,1509681847.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x43153 got:0x56576
2017-11-03T04:04:07.730Z,1509681847.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:08.151Z,1509681848.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:08.523Z,1509681848.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:08.958Z,1509681848.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:09.358Z,1509681849.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:09.723Z,1509681849.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:10.123Z,1509681850.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:10.520Z,1509681850.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:10.919Z,1509681850.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:11.314Z,1509681851.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:11.723Z,1509681851.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:12.118Z,1509681852.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:12.577Z,1509681852.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:12.919Z,1509681852.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:13.319Z,1509681853.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:13.710Z,1509681853.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:14.100Z,1509681854.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:14.571Z,1509681854.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:14.930Z,1509681854.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:15.322Z,1509681855.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:15.723Z,1509681855.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:16.126Z,1509681856.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:16.530Z,1509681856.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:16.904Z,1509681856.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:17.301Z,1509681857.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:17.697Z,1509681857.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:18.135Z,1509681858.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:18.523Z,1509681858.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:18.922Z,1509681858.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:19.302Z,1509681859.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:19.722Z,1509681859.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:20.131Z,1509681860.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:20.503Z,1509681860.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:20.927Z,1509681860.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:21.350Z,1509681861.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:21.707Z,1509681861.707 [PNI_TCM](ERROR): CRC does not match. Expected:0x31812 got:0x4891
2017-11-03T04:04:21.735Z,1509681861.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:24.947Z,1509681864.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:25.095Z,1509681865.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:25.531Z,1509681865.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:25.935Z,1509681865.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:26.300Z,1509681866.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:26.699Z,1509681866.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:27.092Z,1509681867.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:27.495Z,1509681867.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:27.900Z,1509681867.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:28.301Z,1509681868.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:28.699Z,1509681868.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:29.091Z,1509681869.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:29.308Z,1509681869.308 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:04:29.309Z,1509681869.309 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T04:04:29.309Z,1509681869.309 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:04:29.486Z,1509681869.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:04:29.487Z,1509681869.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:29.569Z,1509681869.569 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:04:29.713Z,1509681869.713 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:04:29.859Z,1509681869.859 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:04:29.898Z,1509681869.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:04:29.899Z,1509681869.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:30.295Z,1509681870.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:04:30.296Z,1509681870.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:30.692Z,1509681870.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:04:30.693Z,1509681870.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:31.103Z,1509681871.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:04:31.104Z,1509681871.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:31.205Z,1509681871.205 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:04:31.205Z,1509681871.205 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T04:04:31.473Z,1509681871.473 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:04:31.473Z,1509681871.473 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:04:31.473Z,1509681871.473 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:04:31.473Z,1509681871.473 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:04:31.506Z,1509681871.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:04:31.507Z,1509681871.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:31.899Z,1509681871.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:04:31.900Z,1509681871.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:32.289Z,1509681872.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:04:32.290Z,1509681872.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:32.691Z,1509681872.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:04:32.691Z,1509681872.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:33.077Z,1509681873.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:33.093Z,1509681873.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:04:33.094Z,1509681873.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:33.475Z,1509681873.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:33.490Z,1509681873.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:04:33.491Z,1509681873.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:33.884Z,1509681873.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:33.899Z,1509681873.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:04:33.900Z,1509681873.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:34.285Z,1509681874.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:34.301Z,1509681874.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:04:34.302Z,1509681874.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:34.684Z,1509681874.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:34.699Z,1509681874.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:04:34.700Z,1509681874.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:35.077Z,1509681875.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:35.092Z,1509681875.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:04:35.093Z,1509681875.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:35.476Z,1509681875.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:35.491Z,1509681875.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:04:35.492Z,1509681875.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:35.649Z,1509681875.649 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:04:35.705Z,1509681875.705 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:04:35.707Z,1509681875.707 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:04:35.708Z,1509681875.708 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:04:35.709Z,1509681875.709 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:04:35.879Z,1509681875.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:35.897Z,1509681875.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:04:35.898Z,1509681875.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:36.271Z,1509681876.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:36.299Z,1509681876.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:36.730Z,1509681876.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:37.105Z,1509681877.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:37.508Z,1509681877.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:37.947Z,1509681877.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:38.299Z,1509681878.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:38.727Z,1509681878.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:39.099Z,1509681879.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:39.514Z,1509681879.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:39.946Z,1509681879.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:40.305Z,1509681880.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:40.704Z,1509681880.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:41.107Z,1509681881.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:41.498Z,1509681881.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:41.899Z,1509681881.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:42.302Z,1509681882.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:42.667Z,1509681882.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:42.702Z,1509681882.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:43.089Z,1509681883.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:43.105Z,1509681883.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:43.489Z,1509681883.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:43.509Z,1509681883.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:43.877Z,1509681883.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:43.903Z,1509681883.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:44.267Z,1509681884.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:44.301Z,1509681884.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:44.668Z,1509681884.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:44.703Z,1509681884.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:45.064Z,1509681885.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:45.079Z,1509681885.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:45.467Z,1509681885.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:45.501Z,1509681885.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:45.890Z,1509681885.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:45.905Z,1509681885.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:46.277Z,1509681886.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:46.307Z,1509681886.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:46.689Z,1509681886.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:46.704Z,1509681886.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:47.079Z,1509681887.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:47.107Z,1509681887.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:47.471Z,1509681887.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:47.503Z,1509681887.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:47.871Z,1509681887.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:47.902Z,1509681887.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:48.272Z,1509681888.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:48.302Z,1509681888.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:48.667Z,1509681888.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:48.682Z,1509681888.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:49.082Z,1509681889.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:49.107Z,1509681889.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:49.485Z,1509681889.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:49.515Z,1509681889.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:49.882Z,1509681889.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:49.912Z,1509681889.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:50.268Z,1509681890.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:50.330Z,1509681890.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:50.671Z,1509681890.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:50.690Z,1509681890.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:51.068Z,1509681891.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:51.083Z,1509681891.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:51.521Z,1509681891.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:51.575Z,1509681891.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:51.878Z,1509681891.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:51.942Z,1509681891.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:52.279Z,1509681892.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:52.299Z,1509681892.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:52.682Z,1509681892.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:52.697Z,1509681892.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:53.076Z,1509681893.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:53.131Z,1509681893.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:53.525Z,1509681893.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:53.572Z,1509681893.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:53.876Z,1509681893.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:53.931Z,1509681893.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:54.277Z,1509681894.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:54.334Z,1509681894.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:54.671Z,1509681894.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:54.690Z,1509681894.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:55.097Z,1509681895.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:55.126Z,1509681895.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:55.484Z,1509681895.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:55.507Z,1509681895.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:55.899Z,1509681895.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:56.299Z,1509681896.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:56.694Z,1509681896.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:57.075Z,1509681897.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:57.090Z,1509681897.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:57.475Z,1509681897.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:57.491Z,1509681897.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:57.884Z,1509681897.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:57.900Z,1509681897.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:58.286Z,1509681898.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:58.301Z,1509681898.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:58.684Z,1509681898.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:58.699Z,1509681898.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:59.075Z,1509681899.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:59.090Z,1509681899.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:59.471Z,1509681899.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:59.495Z,1509681899.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:04:59.875Z,1509681899.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:04:59.915Z,1509681899.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:00.280Z,1509681900.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:00.295Z,1509681900.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:00.680Z,1509681900.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:00.699Z,1509681900.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:01.090Z,1509681901.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:01.111Z,1509681901.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:01.491Z,1509681901.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:01.506Z,1509681901.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:01.886Z,1509681901.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:01.901Z,1509681901.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:02.279Z,1509681902.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:02.294Z,1509681902.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:02.677Z,1509681902.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:02.696Z,1509681902.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:03.082Z,1509681903.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:03.097Z,1509681903.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:03.480Z,1509681903.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:03.503Z,1509681903.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:03.882Z,1509681903.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:03.911Z,1509681903.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:04.296Z,1509681904.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:04.311Z,1509681904.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:04.682Z,1509681904.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:04.715Z,1509681904.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:05.071Z,1509681905.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:05.103Z,1509681905.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:05.541Z,1509681905.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:05.574Z,1509681905.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:05.871Z,1509681905.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:05.887Z,1509681905.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:06.272Z,1509681906.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:06.338Z,1509681906.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:06.675Z,1509681906.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:06.691Z,1509681906.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:07.089Z,1509681907.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:07.143Z,1509681907.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:07.535Z,1509681907.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:07.575Z,1509681907.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:07.888Z,1509681907.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:07.935Z,1509681907.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:08.278Z,1509681908.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:08.335Z,1509681908.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:08.677Z,1509681908.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:08.692Z,1509681908.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:09.073Z,1509681909.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:09.099Z,1509681909.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:09.478Z,1509681909.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:09.499Z,1509681909.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:09.888Z,1509681909.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:09.903Z,1509681909.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:10.287Z,1509681910.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:10.307Z,1509681910.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:10.688Z,1509681910.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:10.703Z,1509681910.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:11.079Z,1509681911.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:11.094Z,1509681911.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:11.475Z,1509681911.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:11.527Z,1509681911.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:11.864Z,1509681911.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:11.889Z,1509681911.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:12.278Z,1509681912.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:12.293Z,1509681912.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:12.664Z,1509681912.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:12.696Z,1509681912.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:13.086Z,1509681913.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:13.101Z,1509681913.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:13.490Z,1509681913.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:13.505Z,1509681913.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:13.890Z,1509681913.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:13.905Z,1509681913.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:14.265Z,1509681914.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:14.300Z,1509681914.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:14.670Z,1509681914.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:14.697Z,1509681914.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:15.075Z,1509681915.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:15.111Z,1509681915.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:15.466Z,1509681915.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:15.493Z,1509681915.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:15.891Z,1509681915.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:15.906Z,1509681915.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:16.295Z,1509681916.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:16.310Z,1509681916.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:16.691Z,1509681916.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:16.711Z,1509681916.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:17.068Z,1509681917.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:17.105Z,1509681917.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:17.480Z,1509681917.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:17.506Z,1509681917.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:17.870Z,1509681917.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:17.903Z,1509681917.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:18.269Z,1509681918.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:18.284Z,1509681918.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:18.667Z,1509681918.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:18.682Z,1509681918.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:19.085Z,1509681919.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:19.115Z,1509681919.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:19.532Z,1509681919.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:19.582Z,1509681919.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:19.886Z,1509681919.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:19.939Z,1509681919.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:20.271Z,1509681920.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:20.338Z,1509681920.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:20.674Z,1509681920.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:20.693Z,1509681920.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:21.076Z,1509681921.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:21.124Z,1509681921.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:21.526Z,1509681921.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:21.577Z,1509681921.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:21.882Z,1509681921.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:21.927Z,1509681921.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:25.146Z,1509681925.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:25.195Z,1509681925.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:25.345Z,1509681925.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:25.373Z,1509681925.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:25.730Z,1509681925.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:25.745Z,1509681925.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:26.133Z,1509681926.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:26.148Z,1509681926.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:26.528Z,1509681926.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:26.543Z,1509681926.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:26.987Z,1509681926.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:27.037Z,1509681927.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:27.334Z,1509681927.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:27.349Z,1509681927.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:27.741Z,1509681927.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:27.773Z,1509681927.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:28.129Z,1509681928.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:28.151Z,1509681928.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:28.531Z,1509681928.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:28.546Z,1509681928.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:28.929Z,1509681928.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:28.944Z,1509681928.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:29.335Z,1509681929.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:29.354Z,1509681929.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:29.735Z,1509681929.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:29.750Z,1509681929.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:30.137Z,1509681930.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:30.153Z,1509681930.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:30.537Z,1509681930.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:30.553Z,1509681930.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:30.938Z,1509681930.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:30.953Z,1509681930.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:31.336Z,1509681931.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:31.355Z,1509681931.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:31.735Z,1509681931.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:31.750Z,1509681931.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:32.135Z,1509681932.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:32.155Z,1509681932.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:32.535Z,1509681932.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:32.550Z,1509681932.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:32.938Z,1509681932.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:32.959Z,1509681932.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:33.341Z,1509681933.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:33.356Z,1509681933.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:33.737Z,1509681933.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:33.752Z,1509681933.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:34.132Z,1509681934.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:34.147Z,1509681934.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:34.533Z,1509681934.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:34.548Z,1509681934.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:34.935Z,1509681934.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:34.955Z,1509681934.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:35.335Z,1509681935.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:35.350Z,1509681935.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:35.732Z,1509681935.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:35.747Z,1509681935.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:36.137Z,1509681936.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:36.153Z,1509681936.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:36.542Z,1509681936.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:36.557Z,1509681936.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:36.974Z,1509681936.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:37.071Z,1509681937.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:37.335Z,1509681937.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:37.350Z,1509681937.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:37.734Z,1509681937.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:37.749Z,1509681937.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:38.132Z,1509681938.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:38.187Z,1509681938.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:38.534Z,1509681938.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:38.549Z,1509681938.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:38.998Z,1509681938.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:39.050Z,1509681939.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:39.341Z,1509681939.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:39.355Z,1509681939.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:39.741Z,1509681939.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:39.791Z,1509681939.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:40.135Z,1509681940.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:40.150Z,1509681940.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:40.535Z,1509681940.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:40.550Z,1509681940.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:40.963Z,1509681940.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:41.010Z,1509681941.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:41.340Z,1509681941.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:41.355Z,1509681941.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:41.727Z,1509681941.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:41.755Z,1509681941.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:42.146Z,1509681942.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:42.161Z,1509681942.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:42.547Z,1509681942.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:42.566Z,1509681942.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:42.941Z,1509681942.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:42.995Z,1509681942.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:43.325Z,1509681943.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:43.352Z,1509681943.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:43.725Z,1509681943.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:43.760Z,1509681943.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:44.128Z,1509681944.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:44.154Z,1509681944.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:44.527Z,1509681944.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:44.553Z,1509681944.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:44.945Z,1509681944.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:44.960Z,1509681944.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:45.345Z,1509681945.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:45.360Z,1509681945.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:45.745Z,1509681945.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:45.780Z,1509681945.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:46.127Z,1509681946.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:46.153Z,1509681946.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:46.525Z,1509681946.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:46.552Z,1509681946.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:46.925Z,1509681946.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:46.952Z,1509681946.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:47.326Z,1509681947.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:47.353Z,1509681947.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:47.722Z,1509681947.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:47.753Z,1509681947.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:48.145Z,1509681948.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:48.161Z,1509681948.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:48.546Z,1509681948.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:48.561Z,1509681948.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:48.945Z,1509681948.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:48.961Z,1509681948.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:49.327Z,1509681949.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:49.358Z,1509681949.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:49.723Z,1509681949.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:49.758Z,1509681949.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:50.128Z,1509681950.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:50.157Z,1509681950.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:50.525Z,1509681950.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:50.555Z,1509681950.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:50.975Z,1509681950.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:51.016Z,1509681951.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:51.337Z,1509681951.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:51.407Z,1509681951.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:51.738Z,1509681951.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:51.814Z,1509681951.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:52.123Z,1509681952.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:52.138Z,1509681952.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:52.531Z,1509681952.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:52.583Z,1509681952.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:53.043Z,1509681953.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:53.095Z,1509681953.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:53.339Z,1509681953.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:53.399Z,1509681953.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:53.744Z,1509681953.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:53.791Z,1509681953.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:54.149Z,1509681954.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:54.193Z,1509681954.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:54.544Z,1509681954.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:54.563Z,1509681954.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:54.950Z,1509681954.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:54.999Z,1509681954.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:55.326Z,1509681955.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:55.360Z,1509681955.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:55.727Z,1509681955.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:55.762Z,1509681955.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:56.142Z,1509681956.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:56.171Z,1509681956.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:56.545Z,1509681956.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:56.561Z,1509681956.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:56.934Z,1509681956.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:57.053Z,1509681957.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:57.328Z,1509681957.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:57.363Z,1509681957.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:57.753Z,1509681957.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:57.839Z,1509681957.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:58.126Z,1509681958.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:58.167Z,1509681958.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:58.530Z,1509681958.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:58.576Z,1509681958.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:58.943Z,1509681958.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:58.978Z,1509681958.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:59.339Z,1509681959.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:59.379Z,1509681959.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:05:59.735Z,1509681959.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:05:59.779Z,1509681959.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:00.133Z,1509681960.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:00.177Z,1509681960.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:00.568Z,1509681960.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:00.626Z,1509681960.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:00.929Z,1509681960.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:00.960Z,1509681960.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:01.335Z,1509681961.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:01.367Z,1509681961.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:01.747Z,1509681961.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:01.810Z,1509681961.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:02.152Z,1509681962.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:02.217Z,1509681962.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:02.552Z,1509681962.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:02.598Z,1509681962.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:02.945Z,1509681962.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:06:03.002Z,1509681963.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:03.357Z,1509681963.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:03.755Z,1509681963.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:04.175Z,1509681964.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:04.577Z,1509681964.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:05.011Z,1509681965.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:05.382Z,1509681965.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:05.827Z,1509681965.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:06.269Z,1509681966.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:06.577Z,1509681966.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:07.051Z,1509681967.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:07.347Z,1509681967.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:07.771Z,1509681967.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:08.187Z,1509681968.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:08.568Z,1509681968.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:09.011Z,1509681969.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:09.348Z,1509681969.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:09.747Z,1509681969.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:10.154Z,1509681970.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:10.547Z,1509681970.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:10.996Z,1509681970.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:11.366Z,1509681971.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:11.759Z,1509681971.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:12.147Z,1509681972.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:12.551Z,1509681972.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:12.950Z,1509681972.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:13.359Z,1509681973.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:13.749Z,1509681973.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:14.159Z,1509681974.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:14.564Z,1509681974.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:14.966Z,1509681974.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:15.359Z,1509681975.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:15.759Z,1509681975.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:16.159Z,1509681976.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:16.554Z,1509681976.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:16.960Z,1509681976.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:17.365Z,1509681977.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:17.758Z,1509681977.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:18.152Z,1509681978.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:18.552Z,1509681978.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:19.013Z,1509681979.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:19.367Z,1509681979.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:19.755Z,1509681979.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:20.218Z,1509681980.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:20.560Z,1509681980.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:21.078Z,1509681981.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:21.345Z,1509681981.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:21.779Z,1509681981.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:22.170Z,1509681982.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:25.422Z,1509681985.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:25.614Z,1509681985.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:25.985Z,1509681985.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:26.381Z,1509681986.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:26.776Z,1509681986.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:27.229Z,1509681987.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:27.583Z,1509681987.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:27.981Z,1509681987.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:28.395Z,1509681988.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:28.791Z,1509681988.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:29.174Z,1509681989.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:29.567Z,1509681989.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:29.975Z,1509681989.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:30.366Z,1509681990.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:30.762Z,1509681990.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:31.177Z,1509681991.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:31.511Z,1509681991.511 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:06:31.511Z,1509681991.511 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T04:06:31.511Z,1509681991.511 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:06:31.580Z,1509681991.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:06:31.581Z,1509681991.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:31.681Z,1509681991.681 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:06:31.912Z,1509681991.912 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:06:32.001Z,1509681992.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:06:32.002Z,1509681992.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:32.068Z,1509681992.068 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:06:32.364Z,1509681992.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:06:32.365Z,1509681992.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:32.771Z,1509681992.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:06:32.772Z,1509681992.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:33.163Z,1509681993.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:06:33.164Z,1509681993.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:33.571Z,1509681993.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:06:33.572Z,1509681993.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:33.661Z,1509681993.661 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:06:33.661Z,1509681993.661 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T04:06:33.685Z,1509681993.685 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:06:33.685Z,1509681993.685 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:06:33.685Z,1509681993.685 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:06:33.685Z,1509681993.685 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:06:34.002Z,1509681994.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:06:34.003Z,1509681994.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:34.391Z,1509681994.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:06:34.392Z,1509681994.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:34.776Z,1509681994.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:06:34.777Z,1509681994.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:35.238Z,1509681995.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T04:06:35.239Z,1509681995.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:35.562Z,1509681995.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:06:35.563Z,1509681995.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:35.994Z,1509681995.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:06:35.995Z,1509681995.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:36.406Z,1509681996.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:06:36.406Z,1509681996.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:36.786Z,1509681996.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:06:36.787Z,1509681996.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:37.178Z,1509681997.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:06:37.179Z,1509681997.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:37.584Z,1509681997.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:06:37.585Z,1509681997.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:37.825Z,1509681997.825 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:06:37.879Z,1509681997.879 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:06:37.881Z,1509681997.881 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:06:37.881Z,1509681997.881 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:06:37.882Z,1509681997.882 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:06:38.048Z,1509681998.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T04:06:38.049Z,1509681998.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:38.376Z,1509681998.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:38.875Z,1509681998.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:39.176Z,1509681999.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:39.576Z,1509681999.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:39.986Z,1509681999.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:40.391Z,1509682000.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:40.785Z,1509682000.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:41.167Z,1509682001.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:41.581Z,1509682001.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:42.036Z,1509682002.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:42.384Z,1509682002.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:42.785Z,1509682002.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:43.191Z,1509682003.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:43.588Z,1509682003.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:44.011Z,1509682004.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:44.375Z,1509682004.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:44.782Z,1509682004.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:45.182Z,1509682005.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:45.581Z,1509682005.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:46.011Z,1509682006.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:46.389Z,1509682006.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:46.784Z,1509682006.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:47.163Z,1509682007.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:47.563Z,1509682007.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:48.081Z,1509682008.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:48.403Z,1509682008.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:48.767Z,1509682008.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:49.214Z,1509682009.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:49.585Z,1509682009.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:50.047Z,1509682010.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:50.407Z,1509682010.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:50.785Z,1509682010.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:51.163Z,1509682011.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:51.563Z,1509682011.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:51.986Z,1509682011.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:52.398Z,1509682012.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:52.791Z,1509682012.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:53.161Z,1509682013.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:53.562Z,1509682013.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:53.963Z,1509682013.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:54.363Z,1509682014.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:54.769Z,1509682014.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:55.191Z,1509682015.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:55.591Z,1509682015.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:55.992Z,1509682015.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:56.391Z,1509682016.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:56.766Z,1509682016.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:57.167Z,1509682017.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:57.571Z,1509682017.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:58.002Z,1509682018.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:58.391Z,1509682018.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:58.789Z,1509682018.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:59.191Z,1509682019.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:06:59.567Z,1509682019.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:00.018Z,1509682020.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:00.367Z,1509682020.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:00.767Z,1509682020.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:01.189Z,1509682021.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:01.591Z,1509682021.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:02.047Z,1509682022.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:02.423Z,1509682022.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:02.766Z,1509682022.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:03.193Z,1509682023.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:03.566Z,1509682023.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:04.047Z,1509682024.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:04.411Z,1509682024.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:04.794Z,1509682024.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:05.167Z,1509682025.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:05.570Z,1509682025.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:05.971Z,1509682025.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:05.973Z,1509682025.973 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:05.973Z,1509682025.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2017-11-03T04:07:05.973Z,1509682025.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:07:05.975Z,1509682025.975 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:05.975Z,1509682025.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2017-11-03T04:07:05.975Z,1509682025.975 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:07:06.076Z,1509682026.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:07:06.077Z,1509682026.077 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:07:06.375Z,1509682026.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:06.456Z,1509682026.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:07:06.457Z,1509682026.457 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2017-11-03T04:07:06.457Z,1509682026.457 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:07:06.457Z,1509682026.457 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2017-11-03T04:07:06.769Z,1509682026.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:06.770Z,1509682026.770 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2017-11-03T04:07:06.770Z,1509682026.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:07:06.770Z,1509682026.770 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:07:06.771Z,1509682026.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:07:06.771Z,1509682026.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:07:06.772Z,1509682026.772 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:07:06.772Z,1509682026.772 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:07:06.773Z,1509682026.773 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:07:06.849Z,1509682026.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:07:07.248Z,1509682027.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:07:07.249Z,1509682027.249 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2017-11-03T04:07:07.585Z,1509682027.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:07:07.586Z,1509682027.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:07:07.586Z,1509682027.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:07:07.987Z,1509682027.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:08.379Z,1509682028.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:08.768Z,1509682028.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:09.172Z,1509682029.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:09.566Z,1509682029.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:09.983Z,1509682029.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:10.382Z,1509682030.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:10.783Z,1509682030.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:11.172Z,1509682031.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:11.580Z,1509682031.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:11.992Z,1509682031.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:12.377Z,1509682032.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:12.777Z,1509682032.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:13.184Z,1509682033.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:13.581Z,1509682033.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:14.023Z,1509682034.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:14.377Z,1509682034.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:14.777Z,1509682034.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:15.175Z,1509682035.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:15.577Z,1509682035.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:16.038Z,1509682036.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:16.441Z,1509682036.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:16.835Z,1509682036.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:17.177Z,1509682037.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:17.599Z,1509682037.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:18.038Z,1509682038.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:18.407Z,1509682038.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:18.811Z,1509682038.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:19.183Z,1509682039.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:19.583Z,1509682039.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:19.982Z,1509682039.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:20.365Z,1509682040.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:20.773Z,1509682040.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:21.170Z,1509682041.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:21.579Z,1509682041.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:21.582Z,1509682041.582 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T04:02:21.3Z
2017-11-03T04:07:21.582Z,1509682041.582 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T04:07:21.582Z,1509682041.582 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T04:07:21.983Z,1509682041.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:22.570Z,1509682042.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:25.637Z,1509682045.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:25.761Z,1509682045.761 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0092.lzma
2017-11-03T04:07:25.807Z,1509682045.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:26.225Z,1509682046.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:26.554Z,1509682046.554 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0092.lzma.bak
2017-11-03T04:07:26.554Z,1509682046.554 [DataOverHttps](INFO): SBD MOMSN=5182663
2017-11-03T04:07:26.592Z,1509682046.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:27.223Z,1509682047.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:27.419Z,1509682047.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:30.792Z,1509682050.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:30.969Z,1509682050.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:31.369Z,1509682051.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:31.791Z,1509682051.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:32.173Z,1509682052.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:32.604Z,1509682052.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:35.809Z,1509682055.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:35.921Z,1509682055.921 [DataOverHttps](INFO): Sending 226 bytes from file Logs/20171103T001125/Express0093.lzma
2017-11-03T04:07:36.006Z,1509682056.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:36.383Z,1509682056.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:36.719Z,1509682056.719 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0093.lzma.bak
2017-11-03T04:07:36.719Z,1509682056.719 [DataOverHttps](INFO): SBD MOMSN=5182665
2017-11-03T04:07:36.785Z,1509682056.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:37.363Z,1509682057.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:37.367Z,1509682057.367 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T04:07:37.367Z,1509682057.367 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T04:07:37.367Z,1509682057.367 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T04:07:37.567Z,1509682057.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:40.843Z,1509682060.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:41.039Z,1509682061.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:41.429Z,1509682061.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:41.819Z,1509682061.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:42.215Z,1509682062.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:42.624Z,1509682062.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:43.028Z,1509682063.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:43.435Z,1509682063.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:43.827Z,1509682063.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:44.215Z,1509682064.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:44.623Z,1509682064.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:45.019Z,1509682065.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:45.422Z,1509682065.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:45.824Z,1509682065.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:46.227Z,1509682066.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:46.625Z,1509682066.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:47.011Z,1509682067.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:47.447Z,1509682067.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:47.846Z,1509682067.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:48.239Z,1509682068.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:48.650Z,1509682068.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:49.007Z,1509682069.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:49.435Z,1509682069.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:49.851Z,1509682069.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:50.224Z,1509682070.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:50.620Z,1509682070.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:51.010Z,1509682071.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:51.415Z,1509682071.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:51.896Z,1509682071.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:52.220Z,1509682072.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:52.616Z,1509682072.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:53.006Z,1509682073.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:53.407Z,1509682073.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:53.830Z,1509682073.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:54.249Z,1509682074.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:54.632Z,1509682074.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:55.020Z,1509682075.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:55.419Z,1509682075.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:55.823Z,1509682075.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:56.224Z,1509682076.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:56.627Z,1509682076.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:57.028Z,1509682077.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:57.420Z,1509682077.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:57.817Z,1509682077.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:58.215Z,1509682078.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:58.617Z,1509682078.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:59.028Z,1509682079.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:59.428Z,1509682079.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:07:59.828Z,1509682079.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:00.231Z,1509682080.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:00.624Z,1509682080.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:01.023Z,1509682081.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:01.423Z,1509682081.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:01.871Z,1509682081.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:02.320Z,1509682082.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:02.628Z,1509682082.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:03.039Z,1509682083.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:03.425Z,1509682083.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:03.862Z,1509682083.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:04.267Z,1509682084.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:04.630Z,1509682084.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:05.024Z,1509682085.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:05.407Z,1509682085.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:05.839Z,1509682085.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:06.227Z,1509682086.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:06.639Z,1509682086.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:07.025Z,1509682087.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:07.410Z,1509682087.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:07.832Z,1509682087.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:08.226Z,1509682088.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:08.627Z,1509682088.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:09.016Z,1509682089.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:09.411Z,1509682089.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:09.822Z,1509682089.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:10.221Z,1509682090.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:10.621Z,1509682090.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:11.017Z,1509682091.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:11.415Z,1509682091.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:11.806Z,1509682091.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:11.821Z,1509682091.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:12.221Z,1509682092.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:12.253Z,1509682092.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:12.608Z,1509682092.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:12.623Z,1509682092.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:13.004Z,1509682093.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:13.019Z,1509682093.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:13.401Z,1509682093.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:13.416Z,1509682093.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:13.809Z,1509682093.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:13.831Z,1509682093.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:14.213Z,1509682094.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:14.229Z,1509682094.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:14.608Z,1509682094.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:14.623Z,1509682094.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:15.005Z,1509682095.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:15.020Z,1509682095.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:15.402Z,1509682095.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:15.417Z,1509682095.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:15.810Z,1509682095.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:15.825Z,1509682095.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:16.262Z,1509682096.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:16.331Z,1509682096.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:16.610Z,1509682096.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:16.625Z,1509682096.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:16.997Z,1509682096.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:17.013Z,1509682097.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:17.402Z,1509682097.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:17.459Z,1509682097.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:17.801Z,1509682097.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:17.817Z,1509682097.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:18.212Z,1509682098.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:18.259Z,1509682098.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:18.617Z,1509682098.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:18.663Z,1509682098.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:19.009Z,1509682099.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:19.032Z,1509682099.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:19.402Z,1509682099.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:19.423Z,1509682099.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:19.798Z,1509682099.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:19.823Z,1509682099.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:20.203Z,1509682100.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:20.218Z,1509682100.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:20.597Z,1509682100.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:20.617Z,1509682100.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:21.012Z,1509682101.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:21.027Z,1509682101.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:21.409Z,1509682101.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:21.424Z,1509682101.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:21.809Z,1509682101.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:21.823Z,1509682101.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:22.198Z,1509682102.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:22.212Z,1509682102.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:22.600Z,1509682102.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:22.623Z,1509682102.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:22.997Z,1509682102.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:23.012Z,1509682103.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:23.401Z,1509682103.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:23.416Z,1509682103.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:23.812Z,1509682103.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:23.834Z,1509682103.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:24.211Z,1509682104.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:24.231Z,1509682104.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:24.612Z,1509682104.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:24.635Z,1509682104.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:24.000Z,1509682105.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:25.014Z,1509682105.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:25.402Z,1509682105.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:25.423Z,1509682105.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:25.811Z,1509682105.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:25.830Z,1509682105.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:26.212Z,1509682106.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:26.227Z,1509682106.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:26.612Z,1509682106.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:26.627Z,1509682106.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:27.002Z,1509682107.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:27.022Z,1509682107.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:27.400Z,1509682107.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:27.415Z,1509682107.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:27.812Z,1509682107.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:27.827Z,1509682107.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:28.211Z,1509682108.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:28.231Z,1509682108.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:28.612Z,1509682108.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:28.634Z,1509682108.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:29.003Z,1509682109.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:29.018Z,1509682109.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:29.401Z,1509682109.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:08:29.422Z,1509682109.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:29.835Z,1509682109.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:30.325Z,1509682110.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:30.671Z,1509682110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:31.017Z,1509682111.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:31.452Z,1509682111.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:31.823Z,1509682111.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:32.262Z,1509682112.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:32.659Z,1509682112.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:33.016Z,1509682113.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:33.423Z,1509682113.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:33.827Z,1509682113.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:34.104Z,1509682114.104 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:08:34.105Z,1509682114.105 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T04:08:34.105Z,1509682114.105 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:08:34.234Z,1509682114.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:08:34.235Z,1509682114.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:34.349Z,1509682114.349 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:08:34.349Z,1509682114.349 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T04:08:34.509Z,1509682114.509 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:08:34.661Z,1509682114.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:08:34.662Z,1509682114.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:34.720Z,1509682114.720 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:08:35.018Z,1509682115.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:08:35.019Z,1509682115.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:35.416Z,1509682115.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:08:35.417Z,1509682115.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:35.828Z,1509682115.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:08:35.829Z,1509682115.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:36.223Z,1509682116.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:08:36.224Z,1509682116.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:36.626Z,1509682116.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:08:36.627Z,1509682116.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:37.018Z,1509682117.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:08:37.019Z,1509682117.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:37.414Z,1509682117.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:08:37.415Z,1509682117.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:37.824Z,1509682117.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:08:37.825Z,1509682117.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:40.929Z,1509682120.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T04:08:40.930Z,1509682120.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:41.106Z,1509682121.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T04:08:41.107Z,1509682121.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:41.474Z,1509682121.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:08:41.475Z,1509682121.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:41.879Z,1509682121.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T04:08:41.880Z,1509682121.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:42.275Z,1509682122.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:08:42.276Z,1509682122.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:42.673Z,1509682122.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:08:42.674Z,1509682122.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:43.080Z,1509682123.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T04:08:43.081Z,1509682123.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:43.482Z,1509682123.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T04:08:43.483Z,1509682123.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:43.886Z,1509682123.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T04:08:43.887Z,1509682123.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:44.282Z,1509682124.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T04:08:44.283Z,1509682124.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:44.746Z,1509682124.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T04:08:44.747Z,1509682124.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:45.073Z,1509682125.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:08:45.074Z,1509682125.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:45.513Z,1509682125.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T04:08:45.514Z,1509682125.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:45.886Z,1509682125.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T04:08:45.887Z,1509682125.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:46.310Z,1509682126.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T04:08:46.311Z,1509682126.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:46.718Z,1509682126.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T04:08:46.719Z,1509682126.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:47.082Z,1509682127.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T04:08:47.083Z,1509682127.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:47.473Z,1509682127.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:08:47.474Z,1509682127.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:47.882Z,1509682127.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T04:08:47.883Z,1509682127.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:48.275Z,1509682128.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:08:48.276Z,1509682128.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:48.677Z,1509682128.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T04:08:48.678Z,1509682128.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:49.083Z,1509682129.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T04:08:49.084Z,1509682129.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:49.483Z,1509682129.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T04:08:49.485Z,1509682129.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:49.882Z,1509682129.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T04:08:49.883Z,1509682129.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:50.278Z,1509682130.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T04:08:50.279Z,1509682130.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:50.678Z,1509682130.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T04:08:50.679Z,1509682130.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:51.077Z,1509682131.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T04:08:51.078Z,1509682131.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:51.477Z,1509682131.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T04:08:51.478Z,1509682131.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:51.883Z,1509682131.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T04:08:51.884Z,1509682131.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:52.283Z,1509682132.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T04:08:52.284Z,1509682132.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:52.687Z,1509682132.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T04:08:52.688Z,1509682132.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:53.082Z,1509682133.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T04:08:53.083Z,1509682133.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:53.482Z,1509682133.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T04:08:53.483Z,1509682133.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:53.882Z,1509682133.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:54.283Z,1509682134.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:54.683Z,1509682134.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:55.083Z,1509682135.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:55.484Z,1509682135.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:55.886Z,1509682135.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:56.278Z,1509682136.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:56.683Z,1509682136.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:57.076Z,1509682137.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:57.477Z,1509682137.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:57.883Z,1509682137.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:58.290Z,1509682138.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:58.755Z,1509682138.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:59.083Z,1509682139.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:59.518Z,1509682139.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:08:59.876Z,1509682139.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:00.318Z,1509682140.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:00.718Z,1509682140.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:01.088Z,1509682141.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:01.491Z,1509682141.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:01.894Z,1509682141.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:02.278Z,1509682142.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:02.683Z,1509682142.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:03.078Z,1509682143.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:03.477Z,1509682143.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:03.895Z,1509682143.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:04.294Z,1509682144.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:04.684Z,1509682144.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:05.083Z,1509682145.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:05.483Z,1509682145.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:05.877Z,1509682145.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:06.278Z,1509682146.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:06.678Z,1509682146.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:07.087Z,1509682147.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:07.495Z,1509682147.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:07.887Z,1509682147.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:08.282Z,1509682148.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:08.676Z,1509682148.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:09.075Z,1509682149.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:09.477Z,1509682149.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:09.887Z,1509682149.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:10.291Z,1509682150.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:10.695Z,1509682150.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:11.079Z,1509682151.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:11.476Z,1509682151.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:11.882Z,1509682151.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:12.276Z,1509682152.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:12.746Z,1509682152.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:13.094Z,1509682153.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:13.487Z,1509682153.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:13.930Z,1509682153.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:14.277Z,1509682154.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:14.720Z,1509682154.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:15.120Z,1509682155.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:15.472Z,1509682155.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:15.887Z,1509682155.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:16.295Z,1509682156.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:16.687Z,1509682156.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:17.075Z,1509682157.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:17.483Z,1509682157.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:17.878Z,1509682157.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:18.278Z,1509682158.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:18.683Z,1509682158.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:19.088Z,1509682159.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:19.495Z,1509682159.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:19.887Z,1509682159.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:20.277Z,1509682160.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:20.683Z,1509682160.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:21.083Z,1509682161.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:21.477Z,1509682161.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:21.887Z,1509682161.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:22.295Z,1509682162.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:22.694Z,1509682162.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:23.083Z,1509682163.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:23.483Z,1509682163.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:23.886Z,1509682163.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:24.278Z,1509682164.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:24.676Z,1509682164.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:25.089Z,1509682165.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:25.487Z,1509682165.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:25.887Z,1509682165.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:26.276Z,1509682166.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:26.678Z,1509682166.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:27.143Z,1509682167.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:27.481Z,1509682167.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:27.927Z,1509682167.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:28.288Z,1509682168.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:28.723Z,1509682168.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:29.103Z,1509682169.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:29.485Z,1509682169.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:29.887Z,1509682169.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:30.275Z,1509682170.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:30.684Z,1509682170.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:31.087Z,1509682171.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:31.491Z,1509682171.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:31.887Z,1509682171.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:32.279Z,1509682172.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:32.675Z,1509682172.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:33.079Z,1509682173.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:33.479Z,1509682173.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:33.887Z,1509682173.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:34.287Z,1509682174.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:34.687Z,1509682174.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:35.083Z,1509682175.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:35.479Z,1509682175.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:35.887Z,1509682175.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:36.283Z,1509682176.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:36.689Z,1509682176.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:37.091Z,1509682177.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:37.492Z,1509682177.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:37.895Z,1509682177.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:41.014Z,1509682181.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:41.183Z,1509682181.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:41.602Z,1509682181.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:42.015Z,1509682182.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:42.394Z,1509682182.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:42.802Z,1509682182.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:43.167Z,1509682183.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:43.599Z,1509682183.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:44.014Z,1509682184.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:44.396Z,1509682184.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:44.794Z,1509682184.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:45.171Z,1509682185.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:45.571Z,1509682185.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:45.996Z,1509682185.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:46.371Z,1509682186.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:46.767Z,1509682186.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:47.191Z,1509682187.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:47.592Z,1509682187.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:47.989Z,1509682187.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:48.391Z,1509682188.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:48.784Z,1509682188.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:49.186Z,1509682189.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:49.585Z,1509682189.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:49.989Z,1509682189.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:50.390Z,1509682190.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:50.790Z,1509682190.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:51.185Z,1509682191.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:51.586Z,1509682191.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:51.984Z,1509682191.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:52.384Z,1509682192.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:52.786Z,1509682192.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:53.188Z,1509682193.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:53.592Z,1509682193.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:53.990Z,1509682193.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:54.383Z,1509682194.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:54.784Z,1509682194.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:55.185Z,1509682195.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:55.583Z,1509682195.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:56.031Z,1509682196.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:56.403Z,1509682196.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:56.795Z,1509682196.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:57.186Z,1509682197.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:57.599Z,1509682197.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:57.988Z,1509682197.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:58.406Z,1509682198.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:58.799Z,1509682198.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:59.195Z,1509682199.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:59.588Z,1509682199.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:09:59.994Z,1509682199.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:00.385Z,1509682200.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:00.778Z,1509682200.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:01.165Z,1509682201.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:01.567Z,1509682201.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:01.994Z,1509682201.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:02.387Z,1509682202.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:02.791Z,1509682202.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:03.184Z,1509682203.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:03.587Z,1509682203.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:03.988Z,1509682203.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:04.368Z,1509682204.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:04.787Z,1509682204.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:05.194Z,1509682205.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:05.591Z,1509682205.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:05.998Z,1509682205.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:06.386Z,1509682206.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:06.785Z,1509682206.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:06.786Z,1509682206.786 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:06.787Z,1509682206.787 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2017-11-03T04:10:06.787Z,1509682206.787 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:10:06.789Z,1509682206.789 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:06.789Z,1509682206.789 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2017-11-03T04:10:06.789Z,1509682206.789 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:10:06.873Z,1509682206.873 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:10:06.873Z,1509682206.873 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:10:07.171Z,1509682207.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:07.252Z,1509682207.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:10:07.253Z,1509682207.253 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2017-11-03T04:10:07.253Z,1509682207.253 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:10:07.253Z,1509682207.253 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2017-11-03T04:10:07.593Z,1509682207.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:07.594Z,1509682207.594 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2017-11-03T04:10:07.594Z,1509682207.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:10:07.594Z,1509682207.594 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:10:07.595Z,1509682207.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:10:07.595Z,1509682207.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:10:07.596Z,1509682207.596 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:10:07.596Z,1509682207.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:10:07.596Z,1509682207.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:10:07.686Z,1509682207.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:10:08.078Z,1509682208.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:10:08.078Z,1509682208.078 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2017-11-03T04:10:08.395Z,1509682208.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:10:08.396Z,1509682208.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:10:08.396Z,1509682208.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:10:08.797Z,1509682208.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:10:08.798Z,1509682208.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:09.174Z,1509682209.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:10:09.175Z,1509682209.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:09.573Z,1509682209.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:10:09.574Z,1509682209.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:09.971Z,1509682209.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:10:09.972Z,1509682209.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:10.371Z,1509682210.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:10:10.372Z,1509682210.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:10.774Z,1509682210.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:10:10.775Z,1509682210.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:11.214Z,1509682211.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:10:11.215Z,1509682211.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:11.579Z,1509682211.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:10:11.581Z,1509682211.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:11.982Z,1509682211.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:10:11.983Z,1509682211.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:12.374Z,1509682212.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:10:12.375Z,1509682212.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:12.774Z,1509682212.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:10:12.775Z,1509682212.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:13.175Z,1509682213.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:10:13.176Z,1509682213.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:13.571Z,1509682213.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:10:13.572Z,1509682213.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:13.981Z,1509682213.981 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:10:13.981Z,1509682213.981 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:10:13.981Z,1509682213.981 [BPC1](ERROR): Communications Fault
2017-11-03T04:10:14.011Z,1509682214.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:10:14.012Z,1509682214.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:14.093Z,1509682214.093 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:10:14.403Z,1509682214.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:10:14.403Z,1509682214.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:14.801Z,1509682214.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T04:10:14.802Z,1509682214.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:15.174Z,1509682215.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:10:15.175Z,1509682215.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:15.261Z,1509682215.261 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:10:15.261Z,1509682215.261 [BPC1] No Fault, FailCount= 1
2017-11-03T04:10:15.645Z,1509682215.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T04:10:15.646Z,1509682215.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:15.975Z,1509682215.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:10:15.976Z,1509682215.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:16.379Z,1509682216.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:10:16.380Z,1509682216.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:16.774Z,1509682216.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:10:16.775Z,1509682216.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:17.180Z,1509682217.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:10:17.182Z,1509682217.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:17.579Z,1509682217.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:10:17.580Z,1509682217.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:17.987Z,1509682217.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T04:10:17.988Z,1509682217.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:18.374Z,1509682218.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:10:18.375Z,1509682218.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:18.778Z,1509682218.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:10:18.779Z,1509682218.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:19.172Z,1509682219.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T04:10:19.173Z,1509682219.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:19.606Z,1509682219.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T04:10:19.607Z,1509682219.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:19.986Z,1509682219.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T04:10:19.987Z,1509682219.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:20.405Z,1509682220.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T04:10:20.406Z,1509682220.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:20.788Z,1509682220.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T04:10:20.805Z,1509682220.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:21.172Z,1509682221.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:10:21.173Z,1509682221.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:21.571Z,1509682221.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:10:21.572Z,1509682221.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:21.973Z,1509682221.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:10:21.974Z,1509682221.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:22.374Z,1509682222.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:10:22.375Z,1509682222.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:22.771Z,1509682222.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T04:10:22.772Z,1509682222.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:23.176Z,1509682223.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T04:10:23.177Z,1509682223.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:23.575Z,1509682223.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:10:23.576Z,1509682223.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:23.987Z,1509682223.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:10:23.988Z,1509682223.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:24.372Z,1509682224.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T04:10:24.373Z,1509682224.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:24.774Z,1509682224.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T04:10:24.775Z,1509682224.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:25.171Z,1509682225.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T04:10:25.172Z,1509682225.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:25.571Z,1509682225.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T04:10:25.573Z,1509682225.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:26.004Z,1509682226.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T04:10:26.005Z,1509682226.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:26.376Z,1509682226.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T04:10:26.377Z,1509682226.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:26.805Z,1509682226.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T04:10:26.806Z,1509682226.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:27.174Z,1509682227.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:10:27.175Z,1509682227.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:27.575Z,1509682227.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T04:10:27.575Z,1509682227.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:27.975Z,1509682227.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:28.372Z,1509682228.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:28.774Z,1509682228.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:29.208Z,1509682229.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:29.586Z,1509682229.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:29.983Z,1509682229.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:30.400Z,1509682230.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:30.773Z,1509682230.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:31.176Z,1509682231.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:31.611Z,1509682231.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:31.986Z,1509682231.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:32.407Z,1509682232.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:32.781Z,1509682232.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:33.207Z,1509682233.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:33.582Z,1509682233.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:33.977Z,1509682233.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:34.375Z,1509682234.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:34.776Z,1509682234.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:35.183Z,1509682235.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:35.583Z,1509682235.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:35.994Z,1509682235.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:36.372Z,1509682236.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:36.773Z,1509682236.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:37.183Z,1509682237.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:37.576Z,1509682237.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:37.986Z,1509682237.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:41.090Z,1509682241.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:41.290Z,1509682241.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:41.669Z,1509682241.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:42.069Z,1509682242.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:42.467Z,1509682242.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:42.872Z,1509682242.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:43.281Z,1509682243.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:43.675Z,1509682243.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:44.093Z,1509682244.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:44.470Z,1509682244.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:44.875Z,1509682244.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:45.287Z,1509682245.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:45.673Z,1509682245.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:46.067Z,1509682246.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:46.486Z,1509682246.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:46.873Z,1509682246.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:47.310Z,1509682247.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:47.698Z,1509682247.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:48.073Z,1509682248.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:48.470Z,1509682248.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:48.874Z,1509682248.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:49.275Z,1509682249.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:49.681Z,1509682249.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:50.073Z,1509682250.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:50.471Z,1509682250.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:50.871Z,1509682250.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:51.281Z,1509682251.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:51.679Z,1509682251.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:52.070Z,1509682252.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:52.450Z,1509682252.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:52.883Z,1509682252.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:53.279Z,1509682253.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:53.678Z,1509682253.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:54.075Z,1509682254.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:54.447Z,1509682254.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:54.878Z,1509682254.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:55.279Z,1509682255.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:55.723Z,1509682255.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:56.132Z,1509682256.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:56.563Z,1509682256.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:56.939Z,1509682256.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:57.384Z,1509682257.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:57.732Z,1509682257.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:58.143Z,1509682258.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:58.542Z,1509682258.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:58.899Z,1509682258.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:59.319Z,1509682259.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:10:59.738Z,1509682259.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:00.117Z,1509682260.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:00.504Z,1509682260.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:00.911Z,1509682260.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:01.268Z,1509682261.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:01.723Z,1509682261.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:02.107Z,1509682262.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:02.459Z,1509682262.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:02.874Z,1509682262.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:03.283Z,1509682263.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:03.713Z,1509682263.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:04.063Z,1509682264.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:04.475Z,1509682264.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:04.926Z,1509682264.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:05.313Z,1509682265.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:05.716Z,1509682265.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:06.082Z,1509682266.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:06.475Z,1509682266.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:06.915Z,1509682266.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:07.283Z,1509682267.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:07.675Z,1509682267.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:08.116Z,1509682268.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:08.515Z,1509682268.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:08.878Z,1509682268.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:09.285Z,1509682269.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:09.687Z,1509682269.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:10.093Z,1509682270.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:10.495Z,1509682270.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:10.931Z,1509682270.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:11.287Z,1509682271.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:11.665Z,1509682271.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:12.060Z,1509682272.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:12.511Z,1509682272.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:12.865Z,1509682272.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:13.264Z,1509682273.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:13.665Z,1509682273.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:14.059Z,1509682274.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:14.501Z,1509682274.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:14.867Z,1509682274.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:15.306Z,1509682275.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:15.667Z,1509682275.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:16.103Z,1509682276.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:16.493Z,1509682276.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:16.874Z,1509682276.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:17.279Z,1509682277.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:17.675Z,1509682277.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:18.062Z,1509682278.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:18.463Z,1509682278.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:18.870Z,1509682278.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:19.267Z,1509682279.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:19.679Z,1509682279.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:20.059Z,1509682280.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:20.461Z,1509682280.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:20.879Z,1509682280.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:21.274Z,1509682281.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:21.668Z,1509682281.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:22.059Z,1509682282.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:22.458Z,1509682282.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:22.871Z,1509682282.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:23.281Z,1509682283.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:23.674Z,1509682283.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:24.062Z,1509682284.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:24.463Z,1509682284.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:24.881Z,1509682284.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:25.278Z,1509682285.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:25.679Z,1509682285.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:26.061Z,1509682286.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:26.460Z,1509682286.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:26.879Z,1509682286.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:27.326Z,1509682287.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:27.672Z,1509682287.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:28.061Z,1509682288.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:28.487Z,1509682288.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:28.869Z,1509682288.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:29.276Z,1509682289.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:29.709Z,1509682289.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:30.067Z,1509682290.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:30.511Z,1509682290.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:30.911Z,1509682290.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:31.280Z,1509682291.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:31.672Z,1509682291.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:32.064Z,1509682292.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:32.463Z,1509682292.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:32.881Z,1509682292.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:33.368Z,1509682293.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:33.675Z,1509682293.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:34.063Z,1509682294.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:34.463Z,1509682294.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:34.870Z,1509682294.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:35.275Z,1509682295.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:35.672Z,1509682295.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:36.067Z,1509682296.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:36.464Z,1509682296.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:36.906Z,1509682296.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:37.286Z,1509682297.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:37.675Z,1509682297.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:38.068Z,1509682298.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:41.342Z,1509682301.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:41.527Z,1509682301.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:41.908Z,1509682301.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:42.325Z,1509682302.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:42.695Z,1509682302.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:43.139Z,1509682303.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:43.495Z,1509682303.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:43.962Z,1509682303.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:44.319Z,1509682304.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:44.743Z,1509682304.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:44.857Z,1509682304.857 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T04:11:45.099Z,1509682305.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:45.527Z,1509682305.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:45.894Z,1509682305.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:46.296Z,1509682306.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:46.397Z,1509682306.397 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T04:11:46.397Z,1509682306.397 [DropWeight] No Fault, FailCount= 1
2017-11-03T04:11:46.695Z,1509682306.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:47.126Z,1509682307.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:47.519Z,1509682307.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:47.919Z,1509682307.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:48.295Z,1509682308.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:48.695Z,1509682308.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:49.099Z,1509682309.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:49.495Z,1509682309.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:49.923Z,1509682309.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:50.326Z,1509682310.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:50.724Z,1509682310.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:51.123Z,1509682311.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:51.503Z,1509682311.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:51.894Z,1509682311.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:52.324Z,1509682312.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:52.724Z,1509682312.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:53.124Z,1509682313.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:53.531Z,1509682313.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:53.921Z,1509682313.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:54.294Z,1509682314.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:54.726Z,1509682314.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:55.124Z,1509682315.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:55.495Z,1509682315.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:55.931Z,1509682315.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:56.347Z,1509682316.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:56.724Z,1509682316.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:57.124Z,1509682317.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:57.546Z,1509682317.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:57.899Z,1509682317.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:58.300Z,1509682318.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:58.731Z,1509682318.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:59.104Z,1509682319.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:59.543Z,1509682319.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:11:59.943Z,1509682319.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:00.300Z,1509682320.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:00.699Z,1509682320.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:01.103Z,1509682321.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:01.499Z,1509682321.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:01.925Z,1509682321.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:02.327Z,1509682322.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:02.730Z,1509682322.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:03.099Z,1509682323.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:03.503Z,1509682323.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:03.894Z,1509682323.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:04.295Z,1509682324.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:04.703Z,1509682324.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:05.108Z,1509682325.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:05.508Z,1509682325.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:05.927Z,1509682325.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:06.297Z,1509682326.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:06.698Z,1509682326.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:07.099Z,1509682327.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:07.498Z,1509682327.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:07.925Z,1509682327.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:08.327Z,1509682328.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:08.729Z,1509682328.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:09.095Z,1509682329.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:09.499Z,1509682329.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:09.899Z,1509682329.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:10.299Z,1509682330.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:10.746Z,1509682330.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:11.111Z,1509682331.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:11.512Z,1509682331.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:11.912Z,1509682331.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:12.299Z,1509682332.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:12.700Z,1509682332.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:13.101Z,1509682333.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:13.500Z,1509682333.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:13.912Z,1509682333.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:14.312Z,1509682334.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:14.711Z,1509682334.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:15.091Z,1509682335.091 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:12:15.091Z,1509682335.091 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:12:15.091Z,1509682335.091 [BPC1](ERROR): Communications Fault
2017-11-03T04:12:15.099Z,1509682335.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:15.193Z,1509682335.193 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:12:15.505Z,1509682335.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:15.903Z,1509682335.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:16.296Z,1509682336.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:16.384Z,1509682336.384 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:12:16.385Z,1509682336.385 [BPC1] No Fault, FailCount= 1
2017-11-03T04:12:16.782Z,1509682336.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:17.124Z,1509682337.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:17.525Z,1509682337.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:17.923Z,1509682337.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:18.294Z,1509682338.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:18.695Z,1509682338.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:19.097Z,1509682339.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:19.494Z,1509682339.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:19.922Z,1509682339.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:20.323Z,1509682340.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:20.731Z,1509682340.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:21.099Z,1509682341.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:21.499Z,1509682341.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:21.894Z,1509682341.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:22.307Z,1509682342.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:22.703Z,1509682342.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:23.108Z,1509682343.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:23.525Z,1509682343.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:23.927Z,1509682343.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:24.294Z,1509682344.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:24.699Z,1509682344.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:25.099Z,1509682345.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:25.494Z,1509682345.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:25.925Z,1509682345.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:26.328Z,1509682346.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:26.707Z,1509682346.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:27.102Z,1509682347.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:27.499Z,1509682347.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:27.902Z,1509682347.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:28.307Z,1509682348.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:28.703Z,1509682348.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:29.126Z,1509682349.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:29.525Z,1509682349.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:29.926Z,1509682349.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:30.301Z,1509682350.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:30.699Z,1509682350.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:31.095Z,1509682351.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:31.564Z,1509682351.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:31.925Z,1509682351.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:32.343Z,1509682352.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:32.727Z,1509682352.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:33.131Z,1509682353.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:33.535Z,1509682353.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:33.898Z,1509682353.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:34.301Z,1509682354.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:34.699Z,1509682354.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:35.126Z,1509682355.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:35.512Z,1509682355.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:35.912Z,1509682355.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:36.299Z,1509682356.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:36.699Z,1509682356.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:37.100Z,1509682357.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:37.498Z,1509682357.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:37.928Z,1509682357.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:37.931Z,1509682357.931 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T04:12:37.932Z,1509682357.932 [Default:CheckIn:C.Wait] Stopped
2017-11-03T04:12:37.932Z,1509682357.932 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T04:12:37.932Z,1509682357.932 [Default:CheckIn:D] Running Loop=1
2017-11-03T04:12:38.316Z,1509682358.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:38.335Z,1509682358.335 [Default:CheckIn:D] Stopped
2017-11-03T04:12:38.336Z,1509682358.336 [Default:CheckIn:E] Running Loop=1
2017-11-03T04:12:41.566Z,1509682361.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:41.602Z,1509682361.602 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 237.512826 min 
2017-11-03T04:12:41.602Z,1509682361.602 [Default:CheckIn:E] Stopped
2017-11-03T04:12:41.602Z,1509682361.602 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T04:12:41.602Z,1509682361.602 [Default:CheckIn] Stopped
2017-11-03T04:12:41.602Z,1509682361.602 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T04:12:41.603Z,1509682361.603 [Default:CheckIn](INFO): Running loop #24
2017-11-03T04:12:41.603Z,1509682361.603 [Default:CheckIn] Running Loop=24
2017-11-03T04:12:41.603Z,1509682361.603 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T04:12:41.603Z,1509682361.603 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T04:12:41.746Z,1509682361.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:42.145Z,1509682362.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:42.544Z,1509682362.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:42.951Z,1509682362.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:43.352Z,1509682363.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:43.762Z,1509682363.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:44.167Z,1509682364.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:44.547Z,1509682364.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:44.945Z,1509682364.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:45.343Z,1509682365.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:45.785Z,1509682365.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:46.158Z,1509682366.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:46.591Z,1509682366.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:46.963Z,1509682366.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:47.367Z,1509682367.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:47.743Z,1509682367.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:48.142Z,1509682368.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:48.554Z,1509682368.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:48.963Z,1509682368.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:49.353Z,1509682369.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:49.757Z,1509682369.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:50.149Z,1509682370.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:50.543Z,1509682370.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:50.945Z,1509682370.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:51.344Z,1509682371.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:51.744Z,1509682371.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:52.149Z,1509682372.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:52.563Z,1509682372.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:52.953Z,1509682372.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:53.350Z,1509682373.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:53.744Z,1509682373.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:54.142Z,1509682374.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:54.550Z,1509682374.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:54.963Z,1509682374.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:55.353Z,1509682375.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:55.758Z,1509682375.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:56.143Z,1509682376.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:56.546Z,1509682376.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:56.945Z,1509682376.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:57.344Z,1509682377.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:57.771Z,1509682377.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:58.152Z,1509682378.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:58.563Z,1509682378.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:58.953Z,1509682378.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:59.363Z,1509682379.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:12:59.747Z,1509682379.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:00.171Z,1509682380.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:00.531Z,1509682380.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:00.992Z,1509682380.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:01.394Z,1509682381.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:01.757Z,1509682381.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:02.151Z,1509682382.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:02.533Z,1509682382.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:02.958Z,1509682382.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:03.331Z,1509682383.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:03.732Z,1509682383.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:04.160Z,1509682384.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:04.558Z,1509682384.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:04.962Z,1509682384.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:05.334Z,1509682385.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:05.758Z,1509682385.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:06.135Z,1509682386.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:06.534Z,1509682386.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:06.954Z,1509682386.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:07.353Z,1509682387.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:07.766Z,1509682387.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:07.768Z,1509682387.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:07.768Z,1509682387.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2017-11-03T04:13:07.768Z,1509682387.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:13:07.771Z,1509682387.771 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:07.771Z,1509682387.771 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2017-11-03T04:13:07.771Z,1509682387.771 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:13:07.845Z,1509682387.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:13:07.845Z,1509682387.845 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:13:08.153Z,1509682388.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:08.244Z,1509682388.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:13:08.244Z,1509682388.244 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2017-11-03T04:13:08.245Z,1509682388.245 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:13:08.245Z,1509682388.245 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2017-11-03T04:13:08.556Z,1509682388.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:08.557Z,1509682388.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2017-11-03T04:13:08.557Z,1509682388.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:13:08.557Z,1509682388.557 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:13:08.558Z,1509682388.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:13:08.558Z,1509682388.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:13:08.559Z,1509682388.559 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:13:08.559Z,1509682388.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:13:08.559Z,1509682388.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:13:08.664Z,1509682388.664 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:13:09.044Z,1509682389.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:13:09.044Z,1509682389.044 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2017-11-03T04:13:09.339Z,1509682389.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:13:09.340Z,1509682389.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:13:09.356Z,1509682389.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:13:09.735Z,1509682389.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:13:09.736Z,1509682389.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:10.162Z,1509682390.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:13:10.163Z,1509682390.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:10.563Z,1509682390.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:13:10.563Z,1509682390.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:10.962Z,1509682390.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:13:10.963Z,1509682390.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:11.335Z,1509682391.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:13:11.336Z,1509682391.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:11.742Z,1509682391.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:13:11.743Z,1509682391.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:12.166Z,1509682392.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:13:12.167Z,1509682392.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:12.546Z,1509682392.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:13:12.547Z,1509682392.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:12.966Z,1509682392.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:13:12.967Z,1509682392.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:13.366Z,1509682393.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:13:13.366Z,1509682393.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:13.784Z,1509682393.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:13:13.785Z,1509682393.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:14.150Z,1509682394.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:13:14.151Z,1509682394.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:14.562Z,1509682394.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:13:14.563Z,1509682394.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:14.939Z,1509682394.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:13:14.940Z,1509682394.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:15.370Z,1509682395.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:13:15.371Z,1509682395.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:15.775Z,1509682395.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T04:13:15.776Z,1509682395.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:16.144Z,1509682396.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:13:16.145Z,1509682396.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:16.545Z,1509682396.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T04:13:16.546Z,1509682396.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:16.941Z,1509682396.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:13:16.942Z,1509682396.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:17.341Z,1509682397.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:13:17.342Z,1509682397.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:17.739Z,1509682397.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:13:17.740Z,1509682397.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:18.135Z,1509682398.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:13:18.136Z,1509682398.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:18.538Z,1509682398.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:13:18.539Z,1509682398.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:18.967Z,1509682398.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T04:13:18.969Z,1509682398.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:19.363Z,1509682399.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:13:19.365Z,1509682399.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:19.745Z,1509682399.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:13:19.746Z,1509682399.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:20.139Z,1509682400.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T04:13:20.140Z,1509682400.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:20.539Z,1509682400.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T04:13:20.540Z,1509682400.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:20.939Z,1509682400.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T04:13:20.940Z,1509682400.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:21.346Z,1509682401.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T04:13:21.347Z,1509682401.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:21.738Z,1509682401.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T04:13:21.739Z,1509682401.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:22.165Z,1509682402.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:13:22.166Z,1509682402.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:22.564Z,1509682402.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:13:22.565Z,1509682402.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:22.965Z,1509682402.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:13:22.966Z,1509682402.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:23.346Z,1509682403.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:13:23.347Z,1509682403.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:23.740Z,1509682403.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T04:13:23.741Z,1509682403.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:24.138Z,1509682404.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T04:13:24.139Z,1509682404.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:24.539Z,1509682404.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:13:24.540Z,1509682404.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:24.965Z,1509682404.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:13:24.966Z,1509682404.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:25.364Z,1509682405.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T04:13:25.365Z,1509682405.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:25.788Z,1509682405.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T04:13:25.789Z,1509682405.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:26.138Z,1509682406.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T04:13:26.139Z,1509682406.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:26.534Z,1509682406.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T04:13:26.535Z,1509682406.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:26.946Z,1509682406.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T04:13:26.947Z,1509682406.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:27.340Z,1509682407.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T04:13:27.341Z,1509682407.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:27.781Z,1509682407.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T04:13:27.782Z,1509682407.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:28.145Z,1509682408.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:13:28.146Z,1509682408.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:28.579Z,1509682408.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:28.944Z,1509682408.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:29.371Z,1509682409.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:29.771Z,1509682409.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:30.146Z,1509682410.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:30.541Z,1509682410.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:30.899Z,1509682410.899 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T04:13:30.900Z,1509682410.900 [NAL9602] Data Fault, FailCount= 2
2017-11-03T04:13:30.900Z,1509682410.900 [NAL9602](ERROR): Data Fault
2017-11-03T04:13:30.962Z,1509682410.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:31.064Z,1509682411.064 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T04:13:31.306Z,1509682411.306 [NAL9602](INFO): Powering down
2017-11-03T04:13:31.346Z,1509682411.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:31.747Z,1509682411.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:32.138Z,1509682412.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:32.213Z,1509682412.213 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T04:13:32.213Z,1509682412.213 [NAL9602] No Fault, FailCount= 2
2017-11-03T04:13:32.538Z,1509682412.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:32.939Z,1509682412.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:33.338Z,1509682413.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:33.735Z,1509682413.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:34.147Z,1509682414.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:34.538Z,1509682414.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:34.936Z,1509682414.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:35.345Z,1509682415.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:35.742Z,1509682415.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:36.139Z,1509682416.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:36.542Z,1509682416.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:36.938Z,1509682416.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:37.346Z,1509682417.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:37.740Z,1509682417.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:38.147Z,1509682418.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:38.540Z,1509682418.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:41.698Z,1509682421.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:41.895Z,1509682421.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:42.246Z,1509682422.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:42.661Z,1509682422.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:43.087Z,1509682423.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:43.466Z,1509682423.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:43.886Z,1509682423.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:44.287Z,1509682424.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:44.666Z,1509682424.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:45.067Z,1509682425.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:45.467Z,1509682425.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:45.866Z,1509682425.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:46.267Z,1509682426.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:46.665Z,1509682426.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:47.066Z,1509682427.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:47.447Z,1509682427.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:47.866Z,1509682427.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:48.282Z,1509682428.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:48.667Z,1509682428.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:49.065Z,1509682429.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:49.466Z,1509682429.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:49.867Z,1509682429.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:50.245Z,1509682430.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:50.666Z,1509682430.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:51.046Z,1509682431.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:51.466Z,1509682431.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:51.847Z,1509682431.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:52.248Z,1509682432.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:52.666Z,1509682432.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:53.067Z,1509682433.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:53.448Z,1509682433.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:53.869Z,1509682433.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:54.269Z,1509682434.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:54.647Z,1509682434.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:55.083Z,1509682435.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:55.467Z,1509682435.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:55.846Z,1509682435.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:56.286Z,1509682436.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:56.642Z,1509682436.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:57.050Z,1509682437.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:57.479Z,1509682437.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:57.848Z,1509682437.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:58.273Z,1509682438.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:58.679Z,1509682438.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:59.042Z,1509682439.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:59.446Z,1509682439.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:13:59.847Z,1509682439.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:00.246Z,1509682440.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:00.646Z,1509682440.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:01.047Z,1509682441.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:01.416Z,1509682441.416 [NAL9602](INFO): Powering up NAL9602
2017-11-03T04:14:01.448Z,1509682441.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:01.848Z,1509682441.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:02.250Z,1509682442.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:02.643Z,1509682442.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:03.047Z,1509682443.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:03.471Z,1509682443.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:03.846Z,1509682443.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:04.247Z,1509682444.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:04.651Z,1509682444.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:05.046Z,1509682445.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:05.446Z,1509682445.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:05.848Z,1509682445.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:06.246Z,1509682446.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:06.646Z,1509682446.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:07.048Z,1509682447.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:07.447Z,1509682447.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:07.846Z,1509682447.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:08.247Z,1509682448.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:08.646Z,1509682448.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:09.055Z,1509682449.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:09.494Z,1509682449.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:09.852Z,1509682449.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:10.246Z,1509682450.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:10.698Z,1509682450.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:11.049Z,1509682451.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:11.482Z,1509682451.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:11.855Z,1509682451.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:12.291Z,1509682452.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:12.619Z,1509682452.619 [NAL9602](INFO): NAL9602 initialized
2017-11-03T04:14:12.693Z,1509682452.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:13.050Z,1509682453.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:13.464Z,1509682453.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:13.883Z,1509682453.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:14.264Z,1509682454.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:14.650Z,1509682454.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:15.050Z,1509682455.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:15.451Z,1509682455.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:15.849Z,1509682455.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:16.280Z,1509682456.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:16.664Z,1509682456.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:17.063Z,1509682457.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:17.455Z,1509682457.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:17.850Z,1509682457.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:18.250Z,1509682458.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:18.650Z,1509682458.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:19.064Z,1509682459.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:19.463Z,1509682459.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:19.883Z,1509682459.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:20.255Z,1509682460.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:20.650Z,1509682460.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:21.050Z,1509682461.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:21.451Z,1509682461.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:21.847Z,1509682461.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:22.281Z,1509682462.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:22.681Z,1509682462.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:23.100Z,1509682463.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:23.455Z,1509682463.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:23.843Z,1509682463.843 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T04:14:23.844Z,1509682463.844 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:14:23.844Z,1509682463.844 [BPC1](ERROR): Data Fault
2017-11-03T04:14:23.852Z,1509682463.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:23.941Z,1509682463.941 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:14:24.258Z,1509682464.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:24.657Z,1509682464.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:25.060Z,1509682465.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:25.157Z,1509682465.157 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:14:25.157Z,1509682465.157 [BPC1] No Fault, FailCount= 1
2017-11-03T04:14:25.515Z,1509682465.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:25.861Z,1509682465.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:26.257Z,1509682466.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:26.683Z,1509682466.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:27.063Z,1509682467.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:27.463Z,1509682467.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:27.856Z,1509682467.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:28.261Z,1509682468.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:28.664Z,1509682468.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:29.085Z,1509682469.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:29.456Z,1509682469.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:29.852Z,1509682469.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:30.255Z,1509682470.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:30.659Z,1509682470.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:31.061Z,1509682471.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:31.463Z,1509682471.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:31.861Z,1509682471.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:32.257Z,1509682472.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:32.657Z,1509682472.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:33.057Z,1509682473.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:33.458Z,1509682473.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:33.858Z,1509682473.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:34.261Z,1509682474.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:34.685Z,1509682474.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:35.060Z,1509682475.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:35.457Z,1509682475.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:35.863Z,1509682475.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:36.256Z,1509682476.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:36.663Z,1509682476.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:37.067Z,1509682477.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:37.505Z,1509682477.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:37.871Z,1509682477.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:38.263Z,1509682478.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:38.701Z,1509682478.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:41.754Z,1509682481.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:41.914Z,1509682481.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:42.308Z,1509682482.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:42.711Z,1509682482.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:43.108Z,1509682483.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:43.498Z,1509682483.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:43.902Z,1509682483.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:44.297Z,1509682484.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:44.694Z,1509682484.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:45.109Z,1509682485.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:45.511Z,1509682485.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:45.914Z,1509682485.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:46.299Z,1509682486.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:46.698Z,1509682486.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:47.098Z,1509682487.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:47.538Z,1509682487.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:47.898Z,1509682487.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:48.346Z,1509682488.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:48.747Z,1509682488.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:49.108Z,1509682489.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:49.500Z,1509682489.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:49.903Z,1509682489.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:50.296Z,1509682490.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:50.698Z,1509682490.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:51.107Z,1509682491.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:51.503Z,1509682491.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:51.914Z,1509682491.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:52.299Z,1509682492.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:52.698Z,1509682492.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:53.102Z,1509682493.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:53.502Z,1509682493.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:53.903Z,1509682493.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:54.308Z,1509682494.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:54.712Z,1509682494.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:55.108Z,1509682495.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:55.500Z,1509682495.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:55.900Z,1509682495.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:56.303Z,1509682496.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:56.697Z,1509682496.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:57.109Z,1509682497.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:57.511Z,1509682497.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:57.909Z,1509682497.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:58.300Z,1509682498.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:58.708Z,1509682498.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:59.098Z,1509682499.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:59.501Z,1509682499.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:14:59.896Z,1509682499.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:00.319Z,1509682500.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:00.759Z,1509682500.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:01.108Z,1509682501.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:01.518Z,1509682501.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:01.905Z,1509682501.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:02.318Z,1509682502.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:02.722Z,1509682502.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:03.115Z,1509682503.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:03.511Z,1509682503.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:03.919Z,1509682503.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:04.305Z,1509682504.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:04.703Z,1509682504.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:05.110Z,1509682505.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:05.488Z,1509682505.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:05.914Z,1509682505.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:06.311Z,1509682506.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:06.711Z,1509682506.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:07.111Z,1509682507.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:07.490Z,1509682507.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:07.915Z,1509682507.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:08.288Z,1509682508.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:08.711Z,1509682508.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:09.116Z,1509682509.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:09.512Z,1509682509.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:09.919Z,1509682509.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:10.315Z,1509682510.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:10.715Z,1509682510.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:11.090Z,1509682511.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:11.515Z,1509682511.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:11.915Z,1509682511.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:12.316Z,1509682512.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:12.713Z,1509682512.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:13.119Z,1509682513.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:13.495Z,1509682513.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:13.917Z,1509682513.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:14.295Z,1509682514.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:14.758Z,1509682514.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:15.118Z,1509682515.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:15.520Z,1509682515.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:15.935Z,1509682515.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:16.295Z,1509682516.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:16.726Z,1509682516.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:17.118Z,1509682517.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:17.499Z,1509682517.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:17.890Z,1509682517.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:18.319Z,1509682518.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:18.718Z,1509682518.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:19.118Z,1509682519.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:19.490Z,1509682519.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:19.890Z,1509682519.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:20.291Z,1509682520.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:20.691Z,1509682520.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:21.118Z,1509682521.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:21.516Z,1509682521.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:21.918Z,1509682521.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:22.291Z,1509682522.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:22.691Z,1509682522.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:23.090Z,1509682523.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:23.492Z,1509682523.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:23.891Z,1509682523.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:24.315Z,1509682524.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:24.719Z,1509682524.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:25.119Z,1509682525.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:25.491Z,1509682525.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:25.892Z,1509682525.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:26.293Z,1509682526.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:26.692Z,1509682526.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:27.119Z,1509682527.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:27.519Z,1509682527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:27.918Z,1509682527.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:28.292Z,1509682528.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:28.691Z,1509682528.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:29.091Z,1509682529.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:29.539Z,1509682529.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:29.891Z,1509682529.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:30.319Z,1509682530.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:30.721Z,1509682530.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:31.135Z,1509682531.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:31.522Z,1509682531.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:31.891Z,1509682531.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:32.291Z,1509682532.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:32.690Z,1509682532.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:33.123Z,1509682533.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:33.504Z,1509682533.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:33.903Z,1509682533.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:34.295Z,1509682534.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:34.690Z,1509682534.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:35.089Z,1509682535.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:35.499Z,1509682535.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:35.890Z,1509682535.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:36.295Z,1509682536.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:36.720Z,1509682536.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:37.104Z,1509682537.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:37.490Z,1509682537.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:37.895Z,1509682537.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:38.293Z,1509682538.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:38.691Z,1509682538.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:41.825Z,1509682541.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:42.014Z,1509682542.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:42.391Z,1509682542.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:42.791Z,1509682542.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:43.230Z,1509682543.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:43.579Z,1509682543.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:43.977Z,1509682543.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:44.426Z,1509682544.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:44.787Z,1509682544.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:45.226Z,1509682545.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:45.607Z,1509682545.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:45.979Z,1509682545.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:46.381Z,1509682546.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:46.776Z,1509682546.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:47.192Z,1509682547.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:47.588Z,1509682547.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:47.988Z,1509682547.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:48.377Z,1509682548.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:48.779Z,1509682548.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:49.176Z,1509682549.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:49.577Z,1509682549.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:49.977Z,1509682549.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:50.395Z,1509682550.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:50.791Z,1509682550.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:51.188Z,1509682551.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:51.579Z,1509682551.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:51.983Z,1509682551.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:52.379Z,1509682552.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:52.780Z,1509682552.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:53.190Z,1509682553.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:53.592Z,1509682553.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:53.988Z,1509682553.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:54.380Z,1509682554.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:54.782Z,1509682554.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:55.187Z,1509682555.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:55.580Z,1509682555.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:55.980Z,1509682555.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:56.395Z,1509682556.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:56.798Z,1509682556.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:57.193Z,1509682557.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:57.650Z,1509682557.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:57.993Z,1509682557.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:58.399Z,1509682558.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:58.767Z,1509682558.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:59.215Z,1509682559.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:15:59.619Z,1509682559.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:00.002Z,1509682560.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:00.408Z,1509682560.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:00.769Z,1509682560.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:01.179Z,1509682561.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:01.617Z,1509682561.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:02.010Z,1509682562.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:02.415Z,1509682562.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:02.826Z,1509682562.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:03.183Z,1509682563.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:03.602Z,1509682563.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:03.983Z,1509682563.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:04.379Z,1509682564.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:04.823Z,1509682564.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:05.187Z,1509682565.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:05.598Z,1509682565.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:05.980Z,1509682565.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:06.416Z,1509682566.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:06.818Z,1509682566.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:07.221Z,1509682567.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:07.642Z,1509682567.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:08.030Z,1509682568.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:08.387Z,1509682568.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:08.818Z,1509682568.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:08.820Z,1509682568.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:08.820Z,1509682568.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2017-11-03T04:16:08.820Z,1509682568.820 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:16:08.834Z,1509682568.834 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:08.834Z,1509682568.834 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2017-11-03T04:16:08.834Z,1509682568.834 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:16:08.973Z,1509682568.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:16:08.973Z,1509682568.973 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:16:09.191Z,1509682569.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:09.385Z,1509682569.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:16:09.385Z,1509682569.385 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2017-11-03T04:16:09.385Z,1509682569.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:16:09.385Z,1509682569.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2017-11-03T04:16:09.606Z,1509682569.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:09.607Z,1509682569.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2017-11-03T04:16:09.607Z,1509682569.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:16:09.608Z,1509682569.608 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:16:09.608Z,1509682569.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:16:09.613Z,1509682569.613 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:16:09.613Z,1509682569.613 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:16:09.614Z,1509682569.614 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:16:09.614Z,1509682569.614 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:16:09.697Z,1509682569.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:16:10.097Z,1509682570.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:16:10.097Z,1509682570.097 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2017-11-03T04:16:10.421Z,1509682570.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:16:10.422Z,1509682570.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:16:10.422Z,1509682570.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:16:10.798Z,1509682570.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:16:10.799Z,1509682570.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:11.190Z,1509682571.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:16:11.191Z,1509682571.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:11.662Z,1509682571.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-03T04:16:11.663Z,1509682571.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:11.999Z,1509682571.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:16:11.000Z,1509682572.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:12.397Z,1509682572.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:16:12.398Z,1509682572.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:12.831Z,1509682572.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:16:12.837Z,1509682572.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:13.203Z,1509682573.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:16:13.204Z,1509682573.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:13.638Z,1509682573.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:16:13.639Z,1509682573.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:14.034Z,1509682574.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:16:14.035Z,1509682574.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:14.367Z,1509682574.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:16:14.368Z,1509682574.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:14.766Z,1509682574.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:16:14.767Z,1509682574.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:15.171Z,1509682575.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:16:15.172Z,1509682575.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:15.567Z,1509682575.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:16:15.568Z,1509682575.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:15.965Z,1509682575.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:16:15.966Z,1509682575.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:16.390Z,1509682576.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:16:16.391Z,1509682576.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:16.789Z,1509682576.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T04:16:16.790Z,1509682576.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:17.194Z,1509682577.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:16:17.195Z,1509682577.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:17.566Z,1509682577.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T04:16:17.567Z,1509682577.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:17.970Z,1509682577.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:16:17.971Z,1509682577.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:18.392Z,1509682578.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:16:18.393Z,1509682578.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:18.766Z,1509682578.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:16:18.767Z,1509682578.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:19.192Z,1509682579.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:16:19.193Z,1509682579.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:19.596Z,1509682579.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:16:19.597Z,1509682579.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:19.995Z,1509682579.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T04:16:19.997Z,1509682579.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:20.366Z,1509682580.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:16:20.367Z,1509682580.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:20.773Z,1509682580.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:16:20.774Z,1509682580.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:21.170Z,1509682581.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T04:16:21.171Z,1509682581.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:21.567Z,1509682581.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T04:16:21.568Z,1509682581.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:21.966Z,1509682581.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T04:16:21.967Z,1509682581.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:22.393Z,1509682582.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T04:16:22.394Z,1509682582.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:22.793Z,1509682582.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T04:16:22.794Z,1509682582.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:23.202Z,1509682583.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:16:23.203Z,1509682583.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:23.566Z,1509682583.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:16:23.567Z,1509682583.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:23.970Z,1509682583.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:16:23.971Z,1509682583.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:24.366Z,1509682584.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:16:24.367Z,1509682584.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:24.770Z,1509682584.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T04:16:24.771Z,1509682584.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:25.198Z,1509682585.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T04:16:25.199Z,1509682585.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:25.598Z,1509682585.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:16:25.599Z,1509682585.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:26.026Z,1509682586.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:16:26.027Z,1509682586.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:26.417Z,1509682586.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T04:16:26.418Z,1509682586.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:26.769Z,1509682586.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T04:16:26.770Z,1509682586.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:27.209Z,1509682587.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T04:16:27.210Z,1509682587.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:27.570Z,1509682587.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T04:16:27.571Z,1509682587.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:28.002Z,1509682588.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T04:16:28.003Z,1509682588.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:28.422Z,1509682588.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T04:16:28.423Z,1509682588.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:28.783Z,1509682588.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T04:16:28.805Z,1509682588.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:29.201Z,1509682589.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:16:29.202Z,1509682589.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:29.571Z,1509682589.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T04:16:29.573Z,1509682589.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:29.971Z,1509682589.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:30.371Z,1509682590.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:30.779Z,1509682590.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:31.202Z,1509682591.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:31.583Z,1509682591.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:31.983Z,1509682591.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:32.371Z,1509682592.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:32.770Z,1509682592.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:33.171Z,1509682593.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:33.571Z,1509682593.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:33.971Z,1509682593.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:34.404Z,1509682594.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:34.810Z,1509682594.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:35.205Z,1509682595.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:35.575Z,1509682595.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:35.995Z,1509682595.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:36.397Z,1509682596.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:36.771Z,1509682596.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:37.193Z,1509682597.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:37.593Z,1509682597.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:37.996Z,1509682597.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:38.396Z,1509682598.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:38.774Z,1509682598.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:42.047Z,1509682602.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:42.203Z,1509682602.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:42.615Z,1509682602.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:43.016Z,1509682603.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:43.445Z,1509682603.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:43.805Z,1509682603.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:44.227Z,1509682604.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:44.623Z,1509682604.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:45.010Z,1509682605.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:45.411Z,1509682605.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:45.815Z,1509682605.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:46.205Z,1509682606.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:46.605Z,1509682606.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:47.015Z,1509682607.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:47.414Z,1509682607.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:47.817Z,1509682607.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:48.205Z,1509682608.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:48.605Z,1509682608.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:49.015Z,1509682609.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:49.415Z,1509682609.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:49.814Z,1509682609.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:50.205Z,1509682610.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:50.606Z,1509682610.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:51.013Z,1509682611.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:51.412Z,1509682611.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:51.815Z,1509682611.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:52.205Z,1509682612.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:52.606Z,1509682612.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:53.015Z,1509682613.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:53.406Z,1509682613.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:53.815Z,1509682613.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:54.205Z,1509682614.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:54.616Z,1509682614.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:55.013Z,1509682615.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:55.413Z,1509682615.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:55.818Z,1509682615.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:56.205Z,1509682616.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:56.643Z,1509682616.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:57.018Z,1509682617.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:57.431Z,1509682617.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:57.815Z,1509682617.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:58.227Z,1509682618.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:58.635Z,1509682618.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:59.013Z,1509682619.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:59.415Z,1509682619.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:16:59.819Z,1509682619.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:00.191Z,1509682620.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:00.593Z,1509682620.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:01.016Z,1509682621.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:01.414Z,1509682621.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:01.822Z,1509682621.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:02.188Z,1509682622.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:02.587Z,1509682622.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:03.016Z,1509682623.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:03.416Z,1509682623.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:03.813Z,1509682623.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:04.192Z,1509682624.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:04.587Z,1509682624.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:05.008Z,1509682625.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:05.415Z,1509682625.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:05.813Z,1509682625.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:06.189Z,1509682626.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:06.593Z,1509682626.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:07.017Z,1509682627.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:07.415Z,1509682627.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:07.822Z,1509682627.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:08.195Z,1509682628.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:08.617Z,1509682628.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:09.013Z,1509682629.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:09.416Z,1509682629.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:09.813Z,1509682629.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:10.192Z,1509682630.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:10.658Z,1509682630.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:11.021Z,1509682631.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:11.442Z,1509682631.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:11.825Z,1509682631.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:12.230Z,1509682632.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:12.627Z,1509682632.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:13.021Z,1509682633.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:13.420Z,1509682633.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:13.818Z,1509682633.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:14.197Z,1509682634.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:14.595Z,1509682634.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:15.022Z,1509682635.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:15.403Z,1509682635.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:15.801Z,1509682635.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:16.197Z,1509682636.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:16.592Z,1509682636.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:17.022Z,1509682637.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:17.421Z,1509682637.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:17.823Z,1509682637.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:18.195Z,1509682638.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:18.595Z,1509682638.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:19.022Z,1509682639.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:19.424Z,1509682639.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:19.822Z,1509682639.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:20.203Z,1509682640.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:20.594Z,1509682640.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:21.001Z,1509682641.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:21.397Z,1509682641.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:21.821Z,1509682641.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:22.197Z,1509682642.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:22.595Z,1509682642.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:23.001Z,1509682643.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:23.419Z,1509682643.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:23.821Z,1509682643.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:24.196Z,1509682644.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:24.647Z,1509682644.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:25.001Z,1509682645.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:25.431Z,1509682645.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:25.805Z,1509682645.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:26.231Z,1509682646.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:26.631Z,1509682646.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:27.004Z,1509682647.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:27.404Z,1509682647.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:27.801Z,1509682647.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:28.197Z,1509682648.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:28.597Z,1509682648.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:28.999Z,1509682648.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:29.404Z,1509682649.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:29.800Z,1509682649.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:30.199Z,1509682650.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:30.603Z,1509682650.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:31.001Z,1509682651.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:31.404Z,1509682651.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:31.805Z,1509682651.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:32.203Z,1509682652.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:32.596Z,1509682652.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:33.005Z,1509682653.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:33.405Z,1509682653.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:33.803Z,1509682653.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:34.199Z,1509682654.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:34.598Z,1509682654.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:35.001Z,1509682655.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:35.425Z,1509682655.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:35.801Z,1509682655.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:36.203Z,1509682656.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:36.602Z,1509682656.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:37.001Z,1509682657.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:37.400Z,1509682657.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:37.825Z,1509682657.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:38.203Z,1509682658.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:38.670Z,1509682658.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:39.004Z,1509682659.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:42.128Z,1509682662.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:42.131Z,1509682662.131 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T04:12:41.6Z
2017-11-03T04:17:42.131Z,1509682662.131 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T04:17:42.131Z,1509682662.131 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T04:17:42.311Z,1509682662.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:42.835Z,1509682662.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:43.099Z,1509682663.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:43.535Z,1509682663.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:43.907Z,1509682663.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:47.029Z,1509682667.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:47.157Z,1509682667.157 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0096.lzma
2017-11-03T04:17:47.235Z,1509682667.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:47.612Z,1509682667.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:47.955Z,1509682667.955 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0096.lzma.bak
2017-11-03T04:17:47.955Z,1509682667.955 [DataOverHttps](INFO): SBD MOMSN=5182684
2017-11-03T04:17:48.015Z,1509682668.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:48.606Z,1509682668.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:48.837Z,1509682668.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:51.987Z,1509682671.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:52.179Z,1509682672.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:52.577Z,1509682672.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:52.969Z,1509682672.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:53.355Z,1509682673.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:53.755Z,1509682673.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:56.951Z,1509682676.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:57.057Z,1509682677.057 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20171103T001125/Express0097.lzma
2017-11-03T04:17:57.127Z,1509682677.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:57.562Z,1509682677.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:57.858Z,1509682677.858 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0097.lzma.bak
2017-11-03T04:17:57.858Z,1509682677.858 [DataOverHttps](INFO): SBD MOMSN=5182686
2017-11-03T04:17:57.922Z,1509682677.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:59.323Z,1509682679.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:17:59.327Z,1509682679.327 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T04:17:59.327Z,1509682679.327 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T04:17:59.327Z,1509682679.327 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T04:17:59.471Z,1509682679.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:02.595Z,1509682682.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:02.799Z,1509682682.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:03.183Z,1509682683.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:03.573Z,1509682683.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:03.973Z,1509682683.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:04.373Z,1509682684.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:04.774Z,1509682684.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:05.178Z,1509682685.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:05.577Z,1509682685.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:05.981Z,1509682685.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:06.373Z,1509682686.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:06.772Z,1509682686.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:07.175Z,1509682687.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:07.572Z,1509682687.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:07.971Z,1509682687.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:08.386Z,1509682688.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:08.775Z,1509682688.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:09.183Z,1509682689.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:09.578Z,1509682689.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:09.956Z,1509682689.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:10.375Z,1509682690.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:10.767Z,1509682690.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:11.178Z,1509682691.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:11.586Z,1509682691.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:11.980Z,1509682691.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:12.383Z,1509682692.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:12.755Z,1509682692.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:13.156Z,1509682693.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:13.556Z,1509682693.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:13.979Z,1509682693.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:14.407Z,1509682694.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:14.830Z,1509682694.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:15.181Z,1509682695.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:15.603Z,1509682695.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:15.983Z,1509682695.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:16.403Z,1509682696.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:16.803Z,1509682696.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:17.183Z,1509682697.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:17.591Z,1509682697.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:17.982Z,1509682697.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:18.358Z,1509682698.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:18.763Z,1509682698.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:19.162Z,1509682699.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:19.558Z,1509682699.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:19.959Z,1509682699.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:20.391Z,1509682700.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:20.786Z,1509682700.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:21.187Z,1509682701.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:21.562Z,1509682701.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:21.967Z,1509682701.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:22.360Z,1509682702.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:22.762Z,1509682702.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:23.168Z,1509682703.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:23.587Z,1509682703.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:23.986Z,1509682703.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:24.358Z,1509682704.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:24.756Z,1509682704.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:25.163Z,1509682705.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:25.567Z,1509682705.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:25.967Z,1509682705.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:26.389Z,1509682706.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:26.789Z,1509682706.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:27.169Z,1509682707.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:27.562Z,1509682707.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:27.963Z,1509682707.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:28.367Z,1509682708.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:28.827Z,1509682708.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:29.175Z,1509682709.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:29.603Z,1509682709.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:29.978Z,1509682709.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:30.399Z,1509682710.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:30.799Z,1509682710.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:31.166Z,1509682711.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:31.609Z,1509682711.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:31.967Z,1509682711.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:32.423Z,1509682712.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:32.772Z,1509682712.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:33.175Z,1509682713.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:33.558Z,1509682713.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:33.966Z,1509682713.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:34.362Z,1509682714.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:34.442Z,1509682714.442 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:18:34.442Z,1509682714.442 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T04:18:34.601Z,1509682714.601 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:18:34.601Z,1509682714.601 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:18:34.601Z,1509682714.601 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:18:34.601Z,1509682714.601 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:18:34.766Z,1509682714.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:35.179Z,1509682715.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:35.575Z,1509682715.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:36.049Z,1509682716.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:36.359Z,1509682716.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:36.767Z,1509682716.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:37.166Z,1509682717.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:37.567Z,1509682717.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:37.963Z,1509682717.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:38.372Z,1509682718.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:38.772Z,1509682718.772 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:18:38.830Z,1509682718.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:38.901Z,1509682718.901 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:18:38.903Z,1509682718.903 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:18:38.904Z,1509682718.904 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:18:38.905Z,1509682718.905 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:18:39.183Z,1509682719.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:39.567Z,1509682719.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:39.965Z,1509682719.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:40.366Z,1509682720.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:40.765Z,1509682720.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:41.176Z,1509682721.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:41.569Z,1509682721.569 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T04:18:41.570Z,1509682721.570 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:18:41.570Z,1509682721.570 [BPC1](ERROR): Data Fault
2017-11-03T04:18:41.579Z,1509682721.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:41.678Z,1509682721.678 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:18:41.987Z,1509682721.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:42.366Z,1509682722.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:42.771Z,1509682722.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:42.853Z,1509682722.853 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:18:42.853Z,1509682722.853 [BPC1] No Fault, FailCount= 1
2017-11-03T04:18:43.215Z,1509682723.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:43.565Z,1509682723.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:43.971Z,1509682723.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:44.408Z,1509682724.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:44.773Z,1509682724.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:45.179Z,1509682725.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:45.570Z,1509682725.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:45.977Z,1509682725.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:46.366Z,1509682726.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:46.774Z,1509682726.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:47.180Z,1509682727.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:47.577Z,1509682727.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:47.982Z,1509682727.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:48.365Z,1509682728.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:48.775Z,1509682728.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:49.165Z,1509682729.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:49.565Z,1509682729.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:49.964Z,1509682729.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:50.372Z,1509682730.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:50.776Z,1509682730.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:51.183Z,1509682731.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:51.565Z,1509682731.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:51.965Z,1509682731.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:52.365Z,1509682732.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:52.768Z,1509682732.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:53.191Z,1509682733.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:53.576Z,1509682733.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:53.977Z,1509682733.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:54.364Z,1509682734.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:54.771Z,1509682734.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:55.164Z,1509682735.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:55.563Z,1509682735.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:55.975Z,1509682735.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:56.426Z,1509682736.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:56.825Z,1509682736.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:57.187Z,1509682737.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:57.569Z,1509682737.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:57.975Z,1509682737.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:58.395Z,1509682738.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:58.765Z,1509682738.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:59.255Z,1509682739.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:18:59.575Z,1509682739.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:00.019Z,1509682740.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:03.160Z,1509682743.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:03.314Z,1509682743.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:03.718Z,1509682743.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:04.123Z,1509682744.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:04.523Z,1509682744.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:04.987Z,1509682744.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:05.322Z,1509682745.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:05.685Z,1509682745.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x37929 got:0x55303
2017-11-03T04:19:05.723Z,1509682745.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:06.119Z,1509682746.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:06.518Z,1509682746.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:06.972Z,1509682746.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:07.323Z,1509682747.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:07.719Z,1509682747.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:08.099Z,1509682748.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:08.523Z,1509682748.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:08.897Z,1509682748.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:09.328Z,1509682749.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:09.703Z,1509682749.703 [PNI_TCM](ERROR): CRC does not match. Expected:0x26316 got:0x1857
2017-11-03T04:19:09.738Z,1509682749.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:09.739Z,1509682749.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:09.739Z,1509682749.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2017-11-03T04:19:09.740Z,1509682749.740 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:19:09.741Z,1509682749.741 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:09.742Z,1509682749.742 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2017-11-03T04:19:09.742Z,1509682749.742 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:19:09.832Z,1509682749.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:19:09.833Z,1509682749.833 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:19:10.125Z,1509682750.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:10.217Z,1509682750.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:19:10.217Z,1509682750.217 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2017-11-03T04:19:10.218Z,1509682750.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:19:10.218Z,1509682750.218 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2017-11-03T04:19:10.502Z,1509682750.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:10.502Z,1509682750.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2017-11-03T04:19:10.502Z,1509682750.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:19:10.503Z,1509682750.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:19:10.504Z,1509682750.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:19:10.504Z,1509682750.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:19:10.505Z,1509682750.505 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:19:10.505Z,1509682750.505 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:19:10.505Z,1509682750.505 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:19:10.597Z,1509682750.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:19:11.016Z,1509682751.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:19:11.016Z,1509682751.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2017-11-03T04:19:11.311Z,1509682751.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:19:11.312Z,1509682751.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:19:11.312Z,1509682751.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:19:11.696Z,1509682751.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:12.166Z,1509682752.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:12.520Z,1509682752.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:12.951Z,1509682752.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:13.322Z,1509682753.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:13.738Z,1509682753.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:14.147Z,1509682754.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:14.518Z,1509682754.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:14.925Z,1509682754.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:15.324Z,1509682755.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:15.724Z,1509682755.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:16.103Z,1509682756.103 [PNI_TCM](ERROR): CRC does not match. Expected:0x37583 got:0x7106
2017-11-03T04:19:16.124Z,1509682756.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:16.499Z,1509682756.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:16.898Z,1509682756.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:17.320Z,1509682757.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:17.703Z,1509682757.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:18.130Z,1509682758.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:18.523Z,1509682758.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:18.971Z,1509682758.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:19.320Z,1509682759.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:19.695Z,1509682759.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:20.097Z,1509682760.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:20.503Z,1509682760.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:20.935Z,1509682760.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:21.331Z,1509682761.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:21.712Z,1509682761.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:22.138Z,1509682762.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:22.522Z,1509682762.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:22.893Z,1509682762.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x35151 got:0x45576
2017-11-03T04:19:22.976Z,1509682762.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:23.303Z,1509682763.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:23.725Z,1509682763.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:24.108Z,1509682764.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:24.528Z,1509682764.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:24.911Z,1509682764.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:25.338Z,1509682765.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:25.695Z,1509682765.695 [PNI_TCM](ERROR): CRC does not match. Expected:0x5938 got:0x7106
2017-11-03T04:19:25.731Z,1509682765.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:26.094Z,1509682766.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x9513 got:0x48293
2017-11-03T04:19:26.178Z,1509682766.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:26.506Z,1509682766.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:26.919Z,1509682766.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:27.343Z,1509682767.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:27.710Z,1509682767.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:28.143Z,1509682768.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:28.542Z,1509682768.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:28.905Z,1509682768.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:29.303Z,1509682769.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:29.710Z,1509682769.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:30.134Z,1509682770.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:30.502Z,1509682770.502 [PNI_TCM](ERROR): CRC does not match. Expected:0x51685 got:0x36891
2017-11-03T04:19:30.542Z,1509682770.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:30.915Z,1509682770.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:31.306Z,1509682771.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:31.719Z,1509682771.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:32.105Z,1509682772.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:32.506Z,1509682772.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:32.970Z,1509682772.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:33.339Z,1509682773.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:33.711Z,1509682773.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x54222 got:0x1857
2017-11-03T04:19:33.750Z,1509682773.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:34.117Z,1509682774.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:34.508Z,1509682774.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:34.967Z,1509682774.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:35.301Z,1509682775.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:35.704Z,1509682775.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:36.123Z,1509682776.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:36.539Z,1509682776.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:36.954Z,1509682776.954 [PNI_TCM](ERROR): CRC does not match. Expected:0x4052 got:0x1857
2017-11-03T04:19:36.979Z,1509682776.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:37.308Z,1509682777.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:37.707Z,1509682777.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:38.112Z,1509682778.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:38.516Z,1509682778.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:38.906Z,1509682778.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:39.323Z,1509682779.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:39.719Z,1509682779.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:40.116Z,1509682780.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:40.574Z,1509682780.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:40.897Z,1509682780.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:41.323Z,1509682781.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:41.747Z,1509682781.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:42.123Z,1509682782.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:42.547Z,1509682782.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:42.951Z,1509682782.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:43.323Z,1509682783.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:43.719Z,1509682783.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:44.097Z,1509682784.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:44.523Z,1509682784.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:44.895Z,1509682784.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:45.319Z,1509682785.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:45.727Z,1509682785.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:46.123Z,1509682786.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:46.499Z,1509682786.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:46.977Z,1509682786.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:47.299Z,1509682787.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:47.722Z,1509682787.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:48.120Z,1509682788.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:48.518Z,1509682788.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:48.985Z,1509682788.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:49.323Z,1509682789.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:49.699Z,1509682789.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:50.118Z,1509682790.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:50.498Z,1509682790.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:50.968Z,1509682790.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:51.318Z,1509682791.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:51.721Z,1509682791.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:52.117Z,1509682792.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:52.522Z,1509682792.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:52.900Z,1509682792.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:53.334Z,1509682793.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:53.702Z,1509682793.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:54.130Z,1509682794.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:54.506Z,1509682794.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:54.911Z,1509682794.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:55.335Z,1509682795.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:55.735Z,1509682795.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:56.104Z,1509682796.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:56.511Z,1509682796.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:56.905Z,1509682796.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:57.328Z,1509682797.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:57.708Z,1509682797.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:58.099Z,1509682798.099 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:19:58.099Z,1509682798.099 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:19:58.100Z,1509682798.100 [BPC1](ERROR): Communications Fault
2017-11-03T04:19:58.109Z,1509682798.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:58.209Z,1509682798.209 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:19:58.512Z,1509682798.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:58.919Z,1509682798.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:59.308Z,1509682799.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:19:59.396Z,1509682799.396 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:19:59.396Z,1509682799.396 [BPC1] No Fault, FailCount= 1
2017-11-03T04:19:59.763Z,1509682799.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:00.117Z,1509682800.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:03.403Z,1509682803.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:03.591Z,1509682803.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:03.955Z,1509682803.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:04.355Z,1509682804.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:04.756Z,1509682804.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:05.165Z,1509682805.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:05.571Z,1509682805.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:05.971Z,1509682805.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:06.354Z,1509682806.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:06.759Z,1509682806.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:07.163Z,1509682807.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:07.555Z,1509682807.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:07.959Z,1509682807.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:08.371Z,1509682808.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:08.766Z,1509682808.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:09.241Z,1509682809.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:09.559Z,1509682809.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:09.957Z,1509682809.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:10.355Z,1509682810.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:10.760Z,1509682810.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:11.166Z,1509682811.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:11.569Z,1509682811.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:11.964Z,1509682811.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:12.362Z,1509682812.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:12.763Z,1509682812.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:13.159Z,1509682813.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:13.567Z,1509682813.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:13.955Z,1509682813.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:14.407Z,1509682814.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:14.766Z,1509682814.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:15.206Z,1509682815.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:15.560Z,1509682815.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:15.975Z,1509682815.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:16.360Z,1509682816.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:16.779Z,1509682816.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:17.187Z,1509682817.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:17.577Z,1509682817.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:17.956Z,1509682817.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:18.351Z,1509682818.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:18.751Z,1509682818.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:19.149Z,1509682819.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:19.553Z,1509682819.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:19.951Z,1509682819.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:20.357Z,1509682820.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:20.779Z,1509682820.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:21.159Z,1509682821.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:21.551Z,1509682821.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:21.952Z,1509682821.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:22.351Z,1509682822.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:22.751Z,1509682822.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:23.242Z,1509682823.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:23.578Z,1509682823.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:23.956Z,1509682823.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:24.351Z,1509682824.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:24.751Z,1509682824.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:25.151Z,1509682825.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:25.557Z,1509682825.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:25.951Z,1509682825.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:26.357Z,1509682826.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:26.779Z,1509682826.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:27.157Z,1509682827.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:27.577Z,1509682827.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:27.998Z,1509682827.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:28.351Z,1509682828.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:28.753Z,1509682828.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:29.198Z,1509682829.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:29.564Z,1509682829.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:29.980Z,1509682829.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:30.378Z,1509682830.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:30.751Z,1509682830.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:31.183Z,1509682831.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:31.594Z,1509682831.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:31.947Z,1509682831.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:32.353Z,1509682832.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:32.764Z,1509682832.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:33.156Z,1509682833.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:33.551Z,1509682833.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:33.951Z,1509682833.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:34.350Z,1509682834.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:34.753Z,1509682834.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:35.025Z,1509682835.025 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:20:35.025Z,1509682835.025 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T04:20:35.025Z,1509682835.025 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:20:35.162Z,1509682835.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:20:35.163Z,1509682835.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:35.261Z,1509682835.261 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:20:35.429Z,1509682835.429 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:20:35.578Z,1509682835.578 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:20:35.583Z,1509682835.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:20:35.584Z,1509682835.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:35.953Z,1509682835.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:20:35.954Z,1509682835.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:36.352Z,1509682836.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:20:36.353Z,1509682836.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:36.752Z,1509682836.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:20:36.753Z,1509682836.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:36.841Z,1509682836.841 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:20:36.841Z,1509682836.841 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T04:20:37.152Z,1509682837.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:20:37.153Z,1509682837.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:37.193Z,1509682837.193 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:20:37.193Z,1509682837.193 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:20:37.193Z,1509682837.193 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:20:37.193Z,1509682837.193 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:20:37.555Z,1509682837.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:20:37.556Z,1509682837.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:37.950Z,1509682837.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:20:37.951Z,1509682837.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:38.361Z,1509682838.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:20:38.362Z,1509682838.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:38.767Z,1509682838.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:20:38.768Z,1509682838.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:39.159Z,1509682839.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:20:39.160Z,1509682839.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:39.558Z,1509682839.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:20:39.559Z,1509682839.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:39.952Z,1509682839.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:20:39.953Z,1509682839.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:40.355Z,1509682840.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:20:40.356Z,1509682840.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:40.751Z,1509682840.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:20:40.752Z,1509682840.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:41.166Z,1509682841.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:20:41.167Z,1509682841.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:41.338Z,1509682841.338 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:20:41.395Z,1509682841.395 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:20:41.397Z,1509682841.397 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:20:41.397Z,1509682841.397 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:20:41.398Z,1509682841.398 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:20:41.588Z,1509682841.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:20:41.589Z,1509682841.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:41.960Z,1509682841.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:42.404Z,1509682842.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:42.752Z,1509682842.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:43.155Z,1509682843.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:43.606Z,1509682843.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:43.947Z,1509682843.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:44.391Z,1509682844.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:44.760Z,1509682844.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:45.191Z,1509682845.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:45.587Z,1509682845.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:45.955Z,1509682845.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:46.354Z,1509682846.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:46.751Z,1509682846.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:47.161Z,1509682847.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:47.560Z,1509682847.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:47.963Z,1509682847.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:48.444Z,1509682848.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:48.747Z,1509682848.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:49.155Z,1509682849.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:49.553Z,1509682849.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:49.947Z,1509682849.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:50.363Z,1509682850.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:50.767Z,1509682850.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:51.163Z,1509682851.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:51.559Z,1509682851.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:51.955Z,1509682851.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:52.354Z,1509682852.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:52.751Z,1509682852.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:53.159Z,1509682853.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:53.567Z,1509682853.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:53.959Z,1509682853.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:54.356Z,1509682854.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:54.759Z,1509682854.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:55.161Z,1509682855.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:55.554Z,1509682855.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:55.959Z,1509682855.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:56.404Z,1509682856.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:56.797Z,1509682856.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:57.195Z,1509682857.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:57.562Z,1509682857.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:58.010Z,1509682858.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:58.350Z,1509682858.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:58.839Z,1509682858.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:59.196Z,1509682859.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:20:59.614Z,1509682859.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:00.046Z,1509682860.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:00.397Z,1509682860.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:06.921Z,1509682866.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:07.174Z,1509682867.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:07.542Z,1509682867.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:07.941Z,1509682867.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:08.323Z,1509682868.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:08.714Z,1509682868.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:09.103Z,1509682869.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:09.515Z,1509682869.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:09.946Z,1509682869.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:10.331Z,1509682870.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:10.775Z,1509682870.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:11.129Z,1509682871.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:11.523Z,1509682871.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:11.933Z,1509682871.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:12.316Z,1509682872.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:12.707Z,1509682872.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:13.107Z,1509682873.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:13.551Z,1509682873.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:13.919Z,1509682873.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:14.336Z,1509682874.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:14.727Z,1509682874.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:15.107Z,1509682875.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:15.495Z,1509682875.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:15.890Z,1509682875.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:16.313Z,1509682876.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:16.713Z,1509682876.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:17.122Z,1509682877.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:17.533Z,1509682877.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:17.895Z,1509682877.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:18.317Z,1509682878.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:18.695Z,1509682878.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:19.113Z,1509682879.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:19.548Z,1509682879.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:19.923Z,1509682879.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:20.294Z,1509682880.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:20.690Z,1509682880.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:21.118Z,1509682881.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:21.495Z,1509682881.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:21.895Z,1509682881.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:22.317Z,1509682882.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:22.717Z,1509682882.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:23.127Z,1509682883.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:23.499Z,1509682883.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:23.921Z,1509682883.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:24.298Z,1509682884.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:24.699Z,1509682884.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:25.150Z,1509682885.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:25.524Z,1509682885.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:25.924Z,1509682885.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:26.303Z,1509682886.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:26.739Z,1509682886.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:27.126Z,1509682887.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:27.499Z,1509682887.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:27.931Z,1509682887.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:28.305Z,1509682888.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:28.735Z,1509682888.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:29.178Z,1509682889.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:29.499Z,1509682889.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:29.899Z,1509682889.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:30.301Z,1509682890.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:30.701Z,1509682890.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:31.104Z,1509682891.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:31.563Z,1509682891.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:31.904Z,1509682891.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:32.299Z,1509682892.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:32.701Z,1509682892.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:33.101Z,1509682893.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:33.551Z,1509682893.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:33.900Z,1509682893.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:34.305Z,1509682894.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:34.709Z,1509682894.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:35.110Z,1509682895.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:35.499Z,1509682895.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:35.899Z,1509682895.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:36.301Z,1509682896.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:36.695Z,1509682896.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:37.107Z,1509682897.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:37.543Z,1509682897.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:37.904Z,1509682897.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:38.291Z,1509682898.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:38.693Z,1509682898.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:39.090Z,1509682899.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:39.499Z,1509682899.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:39.899Z,1509682899.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:40.331Z,1509682900.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:40.704Z,1509682900.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:41.143Z,1509682901.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:41.499Z,1509682901.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:41.927Z,1509682901.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:42.294Z,1509682902.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:42.735Z,1509682902.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:43.131Z,1509682903.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:43.558Z,1509682903.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:43.908Z,1509682903.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:44.292Z,1509682904.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:44.693Z,1509682904.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:45.099Z,1509682905.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:45.200Z,1509682905.200 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T04:21:45.541Z,1509682905.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:45.894Z,1509682905.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:46.301Z,1509682906.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:46.705Z,1509682906.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:47.111Z,1509682907.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:47.523Z,1509682907.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:47.918Z,1509682907.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:48.304Z,1509682908.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:48.699Z,1509682908.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:49.101Z,1509682909.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:49.530Z,1509682909.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:49.929Z,1509682909.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:50.299Z,1509682910.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:50.698Z,1509682910.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:51.096Z,1509682911.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:51.503Z,1509682911.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:51.907Z,1509682911.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:52.330Z,1509682912.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:52.704Z,1509682912.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:53.104Z,1509682913.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:53.499Z,1509682913.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:53.946Z,1509682913.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:54.300Z,1509682914.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:54.695Z,1509682914.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:55.111Z,1509682915.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:55.512Z,1509682915.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:55.912Z,1509682915.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:56.299Z,1509682916.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:56.698Z,1509682916.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:57.099Z,1509682917.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:57.497Z,1509682917.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:57.899Z,1509682917.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:58.300Z,1509682918.300 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:21:58.300Z,1509682918.300 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:21:58.300Z,1509682918.300 [BPC1](ERROR): Communications Fault
2017-11-03T04:21:58.308Z,1509682918.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:58.413Z,1509682918.413 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:21:58.708Z,1509682918.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:59.115Z,1509682919.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:59.552Z,1509682919.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:21:59.645Z,1509682919.645 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:21:59.645Z,1509682919.645 [BPC1] No Fault, FailCount= 1
2017-11-03T04:21:59.958Z,1509682919.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:00.333Z,1509682920.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:00.707Z,1509682920.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:04.031Z,1509682924.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:04.201Z,1509682924.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:04.596Z,1509682924.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:05.031Z,1509682925.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:05.393Z,1509682925.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:05.786Z,1509682925.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:06.204Z,1509682926.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:06.603Z,1509682926.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:07.036Z,1509682927.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:07.376Z,1509682927.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:07.775Z,1509682927.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:08.179Z,1509682928.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:08.580Z,1509682928.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:09.059Z,1509682929.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:09.398Z,1509682929.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:09.799Z,1509682929.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:10.177Z,1509682930.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:10.577Z,1509682930.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:10.578Z,1509682930.578 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:10.578Z,1509682930.578 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2017-11-03T04:22:10.578Z,1509682930.578 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:22:10.580Z,1509682930.580 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:10.581Z,1509682930.581 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2017-11-03T04:22:10.581Z,1509682930.581 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:22:10.677Z,1509682930.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:22:10.677Z,1509682930.677 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:22:11.012Z,1509682931.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:11.088Z,1509682931.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:22:11.089Z,1509682931.089 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2017-11-03T04:22:11.089Z,1509682931.089 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:22:11.089Z,1509682931.089 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2017-11-03T04:22:11.409Z,1509682931.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:11.409Z,1509682931.409 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2017-11-03T04:22:11.409Z,1509682931.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:22:11.410Z,1509682931.410 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:22:11.411Z,1509682931.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:22:11.411Z,1509682931.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:22:11.411Z,1509682931.411 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:22:11.412Z,1509682931.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:22:11.412Z,1509682931.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:22:11.489Z,1509682931.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:22:11.902Z,1509682931.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:22:11.902Z,1509682931.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2017-11-03T04:22:12.185Z,1509682932.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:22:12.185Z,1509682932.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:22:12.185Z,1509682932.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:22:12.585Z,1509682932.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:12.989Z,1509682932.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:13.412Z,1509682933.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:13.789Z,1509682933.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:14.185Z,1509682934.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:14.634Z,1509682934.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:15.007Z,1509682935.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:15.489Z,1509682935.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:15.797Z,1509682935.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:16.227Z,1509682936.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:16.585Z,1509682936.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:17.034Z,1509682937.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:17.392Z,1509682937.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:17.807Z,1509682937.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:18.187Z,1509682938.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:18.586Z,1509682938.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:19.012Z,1509682939.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:19.407Z,1509682939.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:19.800Z,1509682939.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:20.189Z,1509682940.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:20.589Z,1509682940.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:21.035Z,1509682941.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:21.400Z,1509682941.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:21.796Z,1509682941.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:22.189Z,1509682942.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:22.583Z,1509682942.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:23.087Z,1509682943.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:23.407Z,1509682943.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:23.803Z,1509682943.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:24.195Z,1509682944.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:24.575Z,1509682944.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:24.999Z,1509682944.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:25.394Z,1509682945.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:25.799Z,1509682945.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:26.177Z,1509682946.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:26.591Z,1509682946.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:26.989Z,1509682946.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:27.392Z,1509682947.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:27.840Z,1509682947.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:28.187Z,1509682948.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:28.586Z,1509682948.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:28.996Z,1509682948.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:29.395Z,1509682949.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:29.842Z,1509682949.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:30.188Z,1509682950.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:30.630Z,1509682950.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:31.051Z,1509682951.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:31.403Z,1509682951.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:31.797Z,1509682951.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:32.176Z,1509682952.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:32.583Z,1509682952.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:33.027Z,1509682953.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:33.404Z,1509682953.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:33.804Z,1509682953.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:34.176Z,1509682954.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:34.581Z,1509682954.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:35.027Z,1509682955.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:35.405Z,1509682955.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:35.807Z,1509682955.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:36.206Z,1509682956.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:36.582Z,1509682956.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:37.054Z,1509682957.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:37.381Z,1509682957.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:37.784Z,1509682957.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:37.864Z,1509682957.864 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:22:37.865Z,1509682957.865 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T04:22:37.865Z,1509682957.865 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:22:37.866Z,1509682957.866 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:22:38.194Z,1509682958.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:22:38.195Z,1509682958.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:38.269Z,1509682958.269 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:22:38.372Z,1509682958.372 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:22:38.616Z,1509682958.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:22:38.617Z,1509682958.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:39.013Z,1509682959.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:22:39.014Z,1509682959.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:39.384Z,1509682959.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:22:39.385Z,1509682959.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:39.785Z,1509682959.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:22:39.786Z,1509682959.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:39.889Z,1509682959.889 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:22:39.889Z,1509682959.889 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T04:22:39.988Z,1509682959.988 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:22:39.989Z,1509682959.989 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:22:39.989Z,1509682959.989 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:22:39.989Z,1509682959.989 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:22:40.183Z,1509682960.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:22:40.185Z,1509682960.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:40.584Z,1509682960.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:22:40.585Z,1509682960.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:41.014Z,1509682961.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:22:41.015Z,1509682961.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:41.412Z,1509682961.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:22:41.414Z,1509682961.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:41.882Z,1509682961.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T04:22:41.883Z,1509682961.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:42.177Z,1509682962.177 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T04:22:42.177Z,1509682962.177 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:22:42.177Z,1509682962.177 [BPC1](ERROR): Data Fault
2017-11-03T04:22:42.186Z,1509682962.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:22:42.187Z,1509682962.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:42.289Z,1509682962.289 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:22:42.586Z,1509682962.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:22:42.587Z,1509682962.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:42.988Z,1509682962.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:22:42.989Z,1509682962.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:43.392Z,1509682963.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:22:43.393Z,1509682963.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:43.500Z,1509682963.500 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:22:43.500Z,1509682963.500 [BPC1] No Fault, FailCount= 1
2017-11-03T04:22:43.858Z,1509682963.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T04:22:43.859Z,1509682963.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:44.117Z,1509682964.117 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:22:44.219Z,1509682964.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:22:44.220Z,1509682964.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:44.271Z,1509682964.271 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:22:44.272Z,1509682964.272 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:22:44.273Z,1509682964.273 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:22:44.273Z,1509682964.273 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:22:44.588Z,1509682964.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:22:44.589Z,1509682964.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:45.027Z,1509682965.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:45.391Z,1509682965.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:45.799Z,1509682965.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:46.187Z,1509682966.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:46.583Z,1509682966.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:46.992Z,1509682966.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:47.391Z,1509682967.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:47.793Z,1509682967.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:48.185Z,1509682968.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:48.599Z,1509682968.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:48.999Z,1509682968.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:49.406Z,1509682969.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:49.799Z,1509682969.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:50.177Z,1509682970.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:50.576Z,1509682970.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:51.001Z,1509682971.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:51.399Z,1509682971.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:51.803Z,1509682971.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:52.178Z,1509682972.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:52.583Z,1509682972.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:53.004Z,1509682973.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:53.404Z,1509682973.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:53.811Z,1509682973.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:54.184Z,1509682974.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:54.580Z,1509682974.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:55.009Z,1509682975.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:55.409Z,1509682975.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:55.807Z,1509682975.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:56.239Z,1509682976.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:56.579Z,1509682976.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:57.031Z,1509682977.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:57.392Z,1509682977.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:57.814Z,1509682977.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:58.183Z,1509682978.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:58.615Z,1509682978.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:59.030Z,1509682979.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:59.408Z,1509682979.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:59.809Z,1509682979.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:22:59.812Z,1509682979.812 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T04:22:59.812Z,1509682979.812 [Default:CheckIn:C.Wait] Stopped
2017-11-03T04:22:59.812Z,1509682979.812 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T04:22:59.812Z,1509682979.812 [Default:CheckIn:D] Running Loop=1
2017-11-03T04:23:00.190Z,1509682980.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:00.194Z,1509682980.194 [Default:CheckIn:D] Stopped
2017-11-03T04:23:00.194Z,1509682980.194 [Default:CheckIn:E] Running Loop=1
2017-11-03T04:23:00.584Z,1509682980.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:00.587Z,1509682980.587 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 247.877116 min 
2017-11-03T04:23:00.587Z,1509682980.587 [Default:CheckIn:E] Stopped
2017-11-03T04:23:00.588Z,1509682980.588 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T04:23:00.588Z,1509682980.588 [Default:CheckIn] Stopped
2017-11-03T04:23:00.588Z,1509682980.588 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T04:23:00.588Z,1509682980.588 [Default:CheckIn](INFO): Running loop #25
2017-11-03T04:23:00.588Z,1509682980.588 [Default:CheckIn] Running Loop=25
2017-11-03T04:23:00.588Z,1509682980.588 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T04:23:00.588Z,1509682980.588 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T04:23:00.992Z,1509682980.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:04.285Z,1509682984.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:04.466Z,1509682984.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:04.828Z,1509682984.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:05.235Z,1509682985.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:05.632Z,1509682985.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:06.047Z,1509682986.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:06.525Z,1509682986.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:06.847Z,1509682986.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:07.231Z,1509682987.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:07.638Z,1509682987.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:08.039Z,1509682988.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:08.512Z,1509682988.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:08.844Z,1509682988.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:09.237Z,1509682989.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:09.655Z,1509682989.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:10.043Z,1509682990.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:10.447Z,1509682990.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:10.847Z,1509682990.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:11.259Z,1509682991.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:11.651Z,1509682991.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:12.090Z,1509682992.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:12.446Z,1509682992.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:12.886Z,1509682992.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:13.232Z,1509682993.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:13.659Z,1509682993.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:14.051Z,1509682994.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:14.450Z,1509682994.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:14.854Z,1509682994.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:15.222Z,1509682995.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:15.650Z,1509682995.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:16.089Z,1509682996.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:16.449Z,1509682996.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:16.867Z,1509682996.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:17.227Z,1509682997.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:17.627Z,1509682997.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:18.051Z,1509682998.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:18.436Z,1509682998.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:18.828Z,1509682998.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:19.226Z,1509682999.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:19.627Z,1509682999.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:20.032Z,1509683000.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:20.507Z,1509683000.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:20.853Z,1509683000.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:21.227Z,1509683001.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:21.625Z,1509683001.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:22.055Z,1509683002.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:22.508Z,1509683002.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:22.854Z,1509683002.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:23.226Z,1509683003.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:23.627Z,1509683003.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:24.023Z,1509683004.023 [BPC1](ERROR): Failed to parse message.
2017-11-03T04:23:24.023Z,1509683004.023 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:23:24.023Z,1509683004.023 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:23:24.023Z,1509683004.023 [BPC1](ERROR): Data Fault
2017-11-03T04:23:24.057Z,1509683004.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:24.149Z,1509683004.149 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:23:24.428Z,1509683004.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:24.826Z,1509683004.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:25.232Z,1509683005.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:25.329Z,1509683005.329 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:23:25.329Z,1509683005.329 [BPC1] No Fault, FailCount= 1
2017-11-03T04:23:25.671Z,1509683005.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:26.032Z,1509683006.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:26.459Z,1509683006.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:26.823Z,1509683006.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:27.229Z,1509683007.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:27.625Z,1509683007.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:28.033Z,1509683008.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:28.440Z,1509683008.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:28.832Z,1509683008.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:29.225Z,1509683009.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:29.625Z,1509683009.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:30.081Z,1509683010.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:30.435Z,1509683010.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:30.871Z,1509683010.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:31.229Z,1509683011.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:31.630Z,1509683011.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:32.043Z,1509683012.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:32.439Z,1509683012.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:32.835Z,1509683012.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:33.230Z,1509683013.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:33.627Z,1509683013.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:34.036Z,1509683014.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:34.490Z,1509683014.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:34.839Z,1509683014.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:35.228Z,1509683015.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:35.635Z,1509683015.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:36.039Z,1509683016.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:36.510Z,1509683016.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:36.836Z,1509683016.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:37.247Z,1509683017.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:37.628Z,1509683017.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:38.040Z,1509683018.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:38.495Z,1509683018.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:38.837Z,1509683018.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:39.232Z,1509683019.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:39.670Z,1509683019.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:40.055Z,1509683020.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:40.483Z,1509683020.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:40.877Z,1509683020.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:41.234Z,1509683021.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:41.632Z,1509683021.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:42.042Z,1509683022.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:42.450Z,1509683022.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:42.840Z,1509683022.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:43.239Z,1509683023.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:43.632Z,1509683023.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:44.084Z,1509683024.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:44.440Z,1509683024.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:44.836Z,1509683024.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:45.239Z,1509683025.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:45.628Z,1509683025.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:46.036Z,1509683026.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:46.439Z,1509683026.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:46.836Z,1509683026.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:47.232Z,1509683027.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:47.629Z,1509683027.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:48.040Z,1509683028.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:48.493Z,1509683028.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:48.843Z,1509683028.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:49.230Z,1509683029.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:49.632Z,1509683029.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:50.040Z,1509683030.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:50.494Z,1509683030.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:50.844Z,1509683030.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:51.233Z,1509683031.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:51.655Z,1509683031.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:52.042Z,1509683032.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:52.447Z,1509683032.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:52.900Z,1509683032.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:53.216Z,1509683033.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:53.638Z,1509683033.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:54.082Z,1509683034.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:54.451Z,1509683034.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:54.886Z,1509683034.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:55.251Z,1509683035.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:55.638Z,1509683035.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:56.047Z,1509683036.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:56.444Z,1509683036.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:56.843Z,1509683036.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:57.236Z,1509683037.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:57.636Z,1509683037.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:58.068Z,1509683038.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:58.443Z,1509683038.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:58.847Z,1509683038.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:59.249Z,1509683039.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:23:59.638Z,1509683039.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:00.043Z,1509683040.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:00.450Z,1509683040.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:00.847Z,1509683040.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:01.232Z,1509683041.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:04.423Z,1509683044.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:04.667Z,1509683044.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:05.067Z,1509683045.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:05.467Z,1509683045.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:05.857Z,1509683045.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:06.290Z,1509683046.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:06.646Z,1509683046.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:07.123Z,1509683047.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:07.456Z,1509683047.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:07.856Z,1509683047.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:08.295Z,1509683048.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:08.652Z,1509683048.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:09.079Z,1509683049.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:09.493Z,1509683049.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:09.852Z,1509683049.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:10.266Z,1509683050.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:10.668Z,1509683050.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:11.064Z,1509683051.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:11.457Z,1509683051.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:11.853Z,1509683051.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:12.259Z,1509683052.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:12.657Z,1509683052.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:13.067Z,1509683053.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:13.466Z,1509683053.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:13.870Z,1509683053.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:14.269Z,1509683054.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:14.663Z,1509683054.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:15.053Z,1509683055.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:15.451Z,1509683055.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:15.860Z,1509683055.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:16.213Z,1509683056.213 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T04:24:16.213Z,1509683056.213 [NAL9602] Data Fault, FailCount= 3
2017-11-03T04:24:16.213Z,1509683056.213 [NAL9602](ERROR): Data Fault
2017-11-03T04:24:16.267Z,1509683056.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:16.345Z,1509683056.345 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T04:24:16.610Z,1509683056.610 [NAL9602](INFO): Powering down
2017-11-03T04:24:16.657Z,1509683056.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:17.055Z,1509683057.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:17.449Z,1509683057.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:17.540Z,1509683057.540 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T04:24:17.540Z,1509683057.540 [NAL9602] No Fault, FailCount= 3
2017-11-03T04:24:17.852Z,1509683057.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:18.250Z,1509683058.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:18.655Z,1509683058.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:19.053Z,1509683059.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:19.450Z,1509683059.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:19.846Z,1509683059.846 [BPC1](ERROR): Failed to parse message.
2017-11-03T04:24:19.846Z,1509683059.846 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:24:19.846Z,1509683059.846 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:24:19.846Z,1509683059.846 [BPC1](ERROR): Data Fault
2017-11-03T04:24:19.854Z,1509683059.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:19.957Z,1509683059.957 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:24:20.260Z,1509683060.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:20.659Z,1509683060.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:21.066Z,1509683061.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:21.152Z,1509683061.152 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:24:21.153Z,1509683061.153 [BPC1] No Fault, FailCount= 1
2017-11-03T04:24:21.511Z,1509683061.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:21.842Z,1509683061.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:22.249Z,1509683062.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:22.694Z,1509683062.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:23.045Z,1509683063.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:23.446Z,1509683063.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:23.847Z,1509683063.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:24.270Z,1509683064.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:24.672Z,1509683064.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:25.072Z,1509683065.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:25.471Z,1509683065.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:25.845Z,1509683065.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:26.271Z,1509683066.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:26.646Z,1509683066.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:27.042Z,1509683067.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:27.445Z,1509683067.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:27.879Z,1509683067.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:28.282Z,1509683068.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:28.648Z,1509683068.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:29.050Z,1509683069.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:29.447Z,1509683069.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:29.846Z,1509683069.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:30.251Z,1509683070.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:30.650Z,1509683070.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:31.046Z,1509683071.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:31.455Z,1509683071.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:31.854Z,1509683071.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:32.259Z,1509683072.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:32.655Z,1509683072.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:33.052Z,1509683073.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:33.454Z,1509683073.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:33.859Z,1509683073.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:34.246Z,1509683074.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:34.682Z,1509683074.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:35.072Z,1509683075.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:35.441Z,1509683075.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:35.941Z,1509683075.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:36.251Z,1509683076.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:36.687Z,1509683076.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:37.078Z,1509683077.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:37.471Z,1509683077.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:37.849Z,1509683077.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:38.245Z,1509683078.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:38.673Z,1509683078.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:39.042Z,1509683079.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:39.449Z,1509683079.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:39.872Z,1509683079.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:40.022Z,1509683080.022 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:24:40.022Z,1509683080.022 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T04:24:40.022Z,1509683080.022 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:24:40.270Z,1509683080.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:24:40.271Z,1509683080.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:40.361Z,1509683080.361 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:24:40.424Z,1509683080.424 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:24:40.515Z,1509683080.515 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:24:40.669Z,1509683080.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:24:40.670Z,1509683080.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:41.047Z,1509683081.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:24:41.048Z,1509683081.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:41.446Z,1509683081.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:24:41.447Z,1509683081.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:41.847Z,1509683081.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:24:41.848Z,1509683081.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:41.953Z,1509683081.953 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:24:41.953Z,1509683081.953 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T04:24:42.133Z,1509683082.133 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:24:42.134Z,1509683082.134 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:24:42.134Z,1509683082.134 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:24:42.134Z,1509683082.134 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:24:42.250Z,1509683082.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:24:42.251Z,1509683082.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:42.646Z,1509683082.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:24:42.647Z,1509683082.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:43.047Z,1509683083.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:24:43.048Z,1509683083.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:43.449Z,1509683083.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:24:43.450Z,1509683083.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:43.855Z,1509683083.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:24:43.856Z,1509683083.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:44.246Z,1509683084.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:24:44.247Z,1509683084.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:44.642Z,1509683084.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:24:44.643Z,1509683084.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:45.047Z,1509683085.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:24:45.048Z,1509683085.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:45.454Z,1509683085.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:24:45.455Z,1509683085.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:45.850Z,1509683085.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:24:45.851Z,1509683085.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:46.288Z,1509683086.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:24:46.289Z,1509683086.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:46.364Z,1509683086.364 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:24:46.443Z,1509683086.443 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:24:46.444Z,1509683086.444 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:24:46.445Z,1509683086.445 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:24:46.445Z,1509683086.445 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:24:46.616Z,1509683086.616 [NAL9602](INFO): Powering up NAL9602
2017-11-03T04:24:46.651Z,1509683086.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:24:46.653Z,1509683086.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:47.050Z,1509683087.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:47.458Z,1509683087.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:47.852Z,1509683087.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:48.244Z,1509683088.244 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:24:48.244Z,1509683088.244 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:24:48.244Z,1509683088.244 [BPC1](ERROR): Data Fault
2017-11-03T04:24:48.255Z,1509683088.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:48.377Z,1509683088.377 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:24:48.651Z,1509683088.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:49.051Z,1509683089.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:49.455Z,1509683089.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:49.580Z,1509683089.580 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:24:49.580Z,1509683089.580 [BPC1] No Fault, FailCount= 1
2017-11-03T04:24:49.940Z,1509683089.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:50.248Z,1509683090.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:50.679Z,1509683090.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:51.051Z,1509683091.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:51.451Z,1509683091.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:51.850Z,1509683091.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:52.252Z,1509683092.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:52.809Z,1509683092.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:53.048Z,1509683093.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:53.452Z,1509683093.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:53.854Z,1509683093.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:54.251Z,1509683094.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:54.663Z,1509683094.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:55.056Z,1509683095.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:55.453Z,1509683095.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:55.863Z,1509683095.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:56.270Z,1509683096.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:56.649Z,1509683096.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:57.069Z,1509683097.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:57.410Z,1509683097.410 [NAL9602](INFO): NAL9602 initialized
2017-11-03T04:24:57.442Z,1509683097.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:57.851Z,1509683097.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:58.282Z,1509683098.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:58.669Z,1509683098.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:59.068Z,1509683099.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:59.451Z,1509683099.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:24:59.842Z,1509683099.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:00.278Z,1509683100.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:00.674Z,1509683100.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:01.043Z,1509683101.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:01.479Z,1509683101.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:04.938Z,1509683104.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:05.088Z,1509683105.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:05.475Z,1509683105.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:05.899Z,1509683105.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:06.307Z,1509683106.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:06.675Z,1509683106.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:07.118Z,1509683107.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:07.523Z,1509683107.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:07.887Z,1509683107.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:08.285Z,1509683108.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:08.662Z,1509683108.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:09.067Z,1509683109.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:09.487Z,1509683109.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:09.866Z,1509683109.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:10.276Z,1509683110.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:10.676Z,1509683110.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:11.076Z,1509683111.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:11.479Z,1509683111.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:11.480Z,1509683111.480 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:11.480Z,1509683111.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2017-11-03T04:25:11.480Z,1509683111.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:25:11.482Z,1509683111.482 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:11.482Z,1509683111.482 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2017-11-03T04:25:11.482Z,1509683111.482 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:25:11.589Z,1509683111.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:25:11.589Z,1509683111.589 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:25:11.879Z,1509683111.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:11.971Z,1509683111.971 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:25:11.971Z,1509683111.971 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2017-11-03T04:25:11.972Z,1509683111.972 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:25:11.972Z,1509683111.972 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2017-11-03T04:25:12.269Z,1509683112.269 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:12.269Z,1509683112.269 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2017-11-03T04:25:12.269Z,1509683112.269 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:25:12.270Z,1509683112.270 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:25:12.270Z,1509683112.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:25:12.271Z,1509683112.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:25:12.271Z,1509683112.271 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:25:12.271Z,1509683112.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:25:12.272Z,1509683112.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:25:12.349Z,1509683112.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:25:12.764Z,1509683112.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:25:12.765Z,1509683112.765 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2017-11-03T04:25:13.081Z,1509683113.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:25:13.082Z,1509683113.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:25:13.082Z,1509683113.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:25:13.481Z,1509683113.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:13.884Z,1509683113.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:14.285Z,1509683114.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:14.675Z,1509683114.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:15.078Z,1509683115.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:15.477Z,1509683115.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:15.867Z,1509683115.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:16.288Z,1509683116.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:16.688Z,1509683116.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:17.082Z,1509683117.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:17.480Z,1509683117.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:17.885Z,1509683117.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:18.281Z,1509683118.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:18.687Z,1509683118.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:19.067Z,1509683119.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:19.518Z,1509683119.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:19.987Z,1509683119.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:20.273Z,1509683120.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:20.703Z,1509683120.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:21.063Z,1509683121.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:21.499Z,1509683121.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:21.944Z,1509683121.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:22.287Z,1509683122.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:22.689Z,1509683122.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:23.091Z,1509683123.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:23.483Z,1509683123.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:23.883Z,1509683123.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:24.263Z,1509683124.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:24.664Z,1509683124.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:25.059Z,1509683125.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:25.487Z,1509683125.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:25.890Z,1509683125.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:26.295Z,1509683126.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:26.666Z,1509683126.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:27.064Z,1509683127.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:27.489Z,1509683127.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:27.866Z,1509683127.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:28.299Z,1509683128.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:28.687Z,1509683128.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:29.087Z,1509683129.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:29.474Z,1509683129.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:29.861Z,1509683129.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:30.262Z,1509683130.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:30.691Z,1509683130.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:31.064Z,1509683131.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:31.487Z,1509683131.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:31.890Z,1509683131.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:32.285Z,1509683132.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:32.686Z,1509683132.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:33.064Z,1509683133.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:33.464Z,1509683133.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:33.954Z,1509683133.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:34.311Z,1509683134.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:34.691Z,1509683134.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:35.118Z,1509683135.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:35.471Z,1509683135.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:35.941Z,1509683135.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:36.303Z,1509683136.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:36.678Z,1509683136.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:37.076Z,1509683137.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:37.484Z,1509683137.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:37.950Z,1509683137.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:38.292Z,1509683138.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:38.662Z,1509683138.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:39.066Z,1509683139.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:39.463Z,1509683139.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:39.862Z,1509683139.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:40.287Z,1509683140.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:40.691Z,1509683140.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:41.091Z,1509683141.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:41.467Z,1509683141.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:41.867Z,1509683141.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:42.289Z,1509683142.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:42.692Z,1509683142.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:43.067Z,1509683143.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:43.491Z,1509683143.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:43.892Z,1509683143.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:44.289Z,1509683144.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:44.692Z,1509683144.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:45.066Z,1509683145.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:45.465Z,1509683145.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:45.866Z,1509683145.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:46.298Z,1509683146.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:46.697Z,1509683146.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:47.080Z,1509683147.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:47.470Z,1509683147.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:47.953Z,1509683147.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:48.273Z,1509683148.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:48.725Z,1509683148.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:49.079Z,1509683149.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:49.479Z,1509683149.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:49.942Z,1509683149.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:50.283Z,1509683150.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:50.691Z,1509683150.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:51.099Z,1509683151.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:51.475Z,1509683151.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:51.876Z,1509683151.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:52.303Z,1509683152.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:52.690Z,1509683152.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:53.087Z,1509683153.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:53.466Z,1509683153.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:53.863Z,1509683153.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:54.267Z,1509683154.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:54.667Z,1509683154.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:55.086Z,1509683155.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:55.485Z,1509683155.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:55.894Z,1509683155.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:56.289Z,1509683156.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:56.667Z,1509683156.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:57.066Z,1509683157.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:57.487Z,1509683157.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:57.886Z,1509683157.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:58.334Z,1509683158.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:58.691Z,1509683158.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:59.106Z,1509683159.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:59.473Z,1509683159.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:25:59.882Z,1509683159.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:00.291Z,1509683160.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:00.691Z,1509683160.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:01.087Z,1509683161.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:01.503Z,1509683161.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:06.982Z,1509683166.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:07.183Z,1509683167.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:07.558Z,1509683167.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:08.035Z,1509683168.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:08.349Z,1509683168.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:08.790Z,1509683168.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:09.191Z,1509683169.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:09.564Z,1509683169.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:09.991Z,1509683169.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:10.401Z,1509683170.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:10.746Z,1509683170.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:11.153Z,1509683171.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:11.553Z,1509683171.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:11.954Z,1509683171.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:12.355Z,1509683172.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:12.767Z,1509683172.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:13.169Z,1509683173.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:13.567Z,1509683173.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:13.944Z,1509683173.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:14.343Z,1509683174.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:14.738Z,1509683174.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:15.142Z,1509683175.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:15.551Z,1509683175.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:15.990Z,1509683175.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:16.344Z,1509683176.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:16.738Z,1509683176.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:17.140Z,1509683177.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:17.541Z,1509683177.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:18.003Z,1509683178.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:18.351Z,1509683178.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:18.745Z,1509683178.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:19.151Z,1509683179.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:19.540Z,1509683179.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:20.007Z,1509683180.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:20.378Z,1509683180.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:20.743Z,1509683180.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:21.226Z,1509683181.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:21.550Z,1509683181.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:22.041Z,1509683182.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:22.354Z,1509683182.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:22.781Z,1509683182.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:23.177Z,1509683183.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:23.542Z,1509683183.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:23.951Z,1509683183.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:24.348Z,1509683184.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:24.753Z,1509683184.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:25.152Z,1509683185.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:25.551Z,1509683185.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:25.945Z,1509683185.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:26.341Z,1509683186.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:26.739Z,1509683186.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:27.142Z,1509683187.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:27.548Z,1509683187.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:27.952Z,1509683187.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:28.348Z,1509683188.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:28.747Z,1509683188.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:29.140Z,1509683189.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:29.542Z,1509683189.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:29.000Z,1509683190.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:30.352Z,1509683190.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:30.760Z,1509683190.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:31.152Z,1509683191.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:31.541Z,1509683191.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:32.009Z,1509683192.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:32.351Z,1509683192.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:32.742Z,1509683192.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:33.144Z,1509683193.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:33.552Z,1509683193.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:34.006Z,1509683194.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:34.357Z,1509683194.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:34.751Z,1509683194.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:35.215Z,1509683195.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:35.545Z,1509683195.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:36.013Z,1509683196.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:36.352Z,1509683196.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:36.790Z,1509683196.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:37.190Z,1509683197.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:37.551Z,1509683197.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:37.944Z,1509683197.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:38.353Z,1509683198.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:38.742Z,1509683198.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:39.143Z,1509683199.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:39.554Z,1509683199.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:39.952Z,1509683199.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:40.353Z,1509683200.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:40.727Z,1509683200.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:41.148Z,1509683201.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:41.553Z,1509683201.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:41.952Z,1509683201.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:42.359Z,1509683202.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:42.499Z,1509683202.499 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:26:42.499Z,1509683202.499 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T04:26:42.499Z,1509683202.499 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:26:42.765Z,1509683202.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:26:42.766Z,1509683202.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:42.841Z,1509683202.841 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:26:42.904Z,1509683202.904 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:26:42.992Z,1509683202.992 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:26:43.157Z,1509683203.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:26:43.158Z,1509683203.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:43.529Z,1509683203.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:26:43.530Z,1509683203.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:43.951Z,1509683203.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:26:43.952Z,1509683203.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:44.376Z,1509683204.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:26:44.377Z,1509683204.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:44.473Z,1509683204.473 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:26:44.473Z,1509683204.473 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T04:26:44.608Z,1509683204.608 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:26:44.609Z,1509683204.609 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:26:44.609Z,1509683204.609 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:26:44.609Z,1509683204.609 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:26:44.758Z,1509683204.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:26:44.759Z,1509683204.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:45.142Z,1509683205.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:26:45.143Z,1509683205.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:45.559Z,1509683205.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:26:45.561Z,1509683205.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:45.952Z,1509683205.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:26:45.953Z,1509683205.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:46.366Z,1509683206.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:26:46.367Z,1509683206.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:46.732Z,1509683206.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:26:46.749Z,1509683206.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:47.154Z,1509683207.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:26:47.155Z,1509683207.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:47.531Z,1509683207.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:26:47.533Z,1509683207.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:47.932Z,1509683207.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:26:47.933Z,1509683207.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:48.366Z,1509683208.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:26:48.367Z,1509683208.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:48.775Z,1509683208.775 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:26:48.775Z,1509683208.775 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:26:48.775Z,1509683208.775 [BPC1](ERROR): Data Fault
2017-11-03T04:26:48.818Z,1509683208.818 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:26:48.861Z,1509683208.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T04:26:48.862Z,1509683208.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:48.935Z,1509683208.935 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:26:48.936Z,1509683208.936 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:26:48.937Z,1509683208.937 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:26:48.938Z,1509683208.938 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:26:48.969Z,1509683208.969 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:26:49.167Z,1509683209.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:26:49.168Z,1509683209.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:49.536Z,1509683209.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:49.935Z,1509683209.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:50.018Z,1509683210.018 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:26:50.018Z,1509683210.018 [BPC1] No Fault, FailCount= 1
2017-11-03T04:26:50.407Z,1509683210.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:50.771Z,1509683210.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:51.139Z,1509683211.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:51.567Z,1509683211.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:51.965Z,1509683211.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:52.365Z,1509683212.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:52.740Z,1509683212.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:53.139Z,1509683213.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:53.547Z,1509683213.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:53.939Z,1509683213.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:54.345Z,1509683214.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:54.767Z,1509683214.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:55.163Z,1509683215.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:55.571Z,1509683215.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:55.975Z,1509683215.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:56.338Z,1509683216.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:56.740Z,1509683216.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:57.139Z,1509683217.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:57.565Z,1509683217.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:57.945Z,1509683217.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:58.345Z,1509683218.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:58.739Z,1509683218.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:59.169Z,1509683219.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:59.541Z,1509683219.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:26:59.939Z,1509683219.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:00.345Z,1509683220.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:00.764Z,1509683220.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:01.144Z,1509683221.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:01.540Z,1509683221.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:04.787Z,1509683224.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:05.029Z,1509683225.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:05.372Z,1509683225.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:05.813Z,1509683225.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:06.173Z,1509683226.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:06.619Z,1509683226.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:07.021Z,1509683227.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:07.354Z,1509683227.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:07.752Z,1509683227.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:08.154Z,1509683228.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:08.562Z,1509683228.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:08.961Z,1509683228.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:09.365Z,1509683229.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:09.759Z,1509683229.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:10.153Z,1509683230.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:10.555Z,1509683230.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:10.950Z,1509683230.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:11.359Z,1509683231.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:11.766Z,1509683231.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:12.160Z,1509683232.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:12.551Z,1509683232.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:12.958Z,1509683232.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:13.355Z,1509683233.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:13.759Z,1509683233.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:14.155Z,1509683234.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:14.560Z,1509683234.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:15.010Z,1509683235.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:15.360Z,1509683235.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:15.759Z,1509683235.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:16.153Z,1509683236.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:16.554Z,1509683236.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:17.013Z,1509683237.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:17.367Z,1509683237.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:17.765Z,1509683237.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:18.160Z,1509683238.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:18.595Z,1509683238.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:19.048Z,1509683239.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:19.355Z,1509683239.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:19.754Z,1509683239.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:20.194Z,1509683240.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:20.564Z,1509683240.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:21.054Z,1509683241.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:21.407Z,1509683241.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:21.755Z,1509683241.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:22.158Z,1509683242.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:22.557Z,1509683242.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:22.955Z,1509683242.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:23.371Z,1509683243.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:23.764Z,1509683243.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:24.164Z,1509683244.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:24.563Z,1509683244.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:24.954Z,1509683244.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:25.357Z,1509683245.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:25.758Z,1509683245.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:26.163Z,1509683246.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:26.565Z,1509683246.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:26.970Z,1509683246.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:27.370Z,1509683247.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:27.757Z,1509683247.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:28.163Z,1509683248.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:28.555Z,1509683248.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:29.010Z,1509683249.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:29.364Z,1509683249.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:29.765Z,1509683249.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:30.165Z,1509683250.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:30.558Z,1509683250.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:31.006Z,1509683251.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:31.356Z,1509683251.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:31.754Z,1509683251.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:32.163Z,1509683252.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:32.565Z,1509683252.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:33.015Z,1509683253.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:33.365Z,1509683253.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:33.819Z,1509683253.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:34.160Z,1509683254.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:34.583Z,1509683254.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:35.021Z,1509683255.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:35.391Z,1509683255.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:35.793Z,1509683255.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:36.155Z,1509683256.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:36.551Z,1509683256.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:36.959Z,1509683256.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:37.350Z,1509683257.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:37.753Z,1509683257.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:38.153Z,1509683258.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:38.557Z,1509683258.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:38.956Z,1509683258.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:39.357Z,1509683259.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:39.755Z,1509683259.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:40.151Z,1509683260.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:40.556Z,1509683260.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:40.955Z,1509683260.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:41.362Z,1509683261.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:41.763Z,1509683261.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:42.157Z,1509683262.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:42.552Z,1509683262.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:42.994Z,1509683262.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:43.359Z,1509683263.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:43.754Z,1509683263.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:44.157Z,1509683264.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:44.563Z,1509683264.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:45.003Z,1509683265.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:45.363Z,1509683265.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:45.759Z,1509683265.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:46.154Z,1509683266.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:46.555Z,1509683266.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:47.009Z,1509683267.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:47.358Z,1509683267.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:47.806Z,1509683267.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:48.215Z,1509683268.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:48.554Z,1509683268.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:49.070Z,1509683269.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:49.362Z,1509683269.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:49.786Z,1509683269.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:50.176Z,1509683270.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:50.566Z,1509683270.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:50.970Z,1509683270.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:51.363Z,1509683271.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:51.760Z,1509683271.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:52.143Z,1509683272.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:52.561Z,1509683272.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:52.943Z,1509683272.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:53.367Z,1509683273.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:53.759Z,1509683273.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:54.160Z,1509683274.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:54.549Z,1509683274.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:54.947Z,1509683274.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:55.348Z,1509683275.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:55.759Z,1509683275.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:56.147Z,1509683276.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:56.624Z,1509683276.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:57.006Z,1509683277.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:57.381Z,1509683277.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:57.747Z,1509683277.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:58.147Z,1509683278.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:58.547Z,1509683278.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:58.988Z,1509683278.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:59.356Z,1509683279.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:27:59.779Z,1509683279.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:00.156Z,1509683280.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:00.555Z,1509683280.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:00.993Z,1509683280.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:00.000Z,1509683281.000 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T04:23:00.6Z
2017-11-03T04:28:00.000Z,1509683281.000 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T04:28:00.000Z,1509683281.000 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T04:28:01.353Z,1509683281.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:01.910Z,1509683281.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:05.055Z,1509683285.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:05.193Z,1509683285.193 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0100.lzma
2017-11-03T04:28:05.269Z,1509683285.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:05.655Z,1509683285.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:05.967Z,1509683285.967 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0100.lzma.bak
2017-11-03T04:28:05.967Z,1509683285.967 [DataOverHttps](INFO): SBD MOMSN=5182699
2017-11-03T04:28:06.034Z,1509683286.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:06.659Z,1509683286.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:06.835Z,1509683286.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:10.170Z,1509683290.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:10.386Z,1509683290.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:10.753Z,1509683290.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:11.153Z,1509683291.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:11.545Z,1509683291.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:11.952Z,1509683291.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:15.247Z,1509683295.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:15.247Z,1509683295.247 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2017-11-03T04:28:15.248Z,1509683295.248 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:28:15.249Z,1509683295.249 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:15.249Z,1509683295.249 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2017-11-03T04:28:15.250Z,1509683295.250 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:28:15.251Z,1509683295.251 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:15.251Z,1509683295.251 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2017-11-03T04:28:15.251Z,1509683295.251 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:28:15.329Z,1509683295.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:28:15.329Z,1509683295.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:28:15.329Z,1509683295.329 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:28:15.341Z,1509683295.341 [DataOverHttps](INFO): Sending 224 bytes from file Logs/20171103T001125/Express0101.lzma
2017-11-03T04:28:15.512Z,1509683295.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:28:15.512Z,1509683295.512 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2017-11-03T04:28:15.513Z,1509683295.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:28:15.513Z,1509683295.513 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2017-11-03T04:28:15.513Z,1509683295.513 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:28:15.513Z,1509683295.513 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2017-11-03T04:28:15.792Z,1509683295.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:28:15.792Z,1509683295.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:28:15.793Z,1509683295.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:28:15.793Z,1509683295.793 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:28:15.793Z,1509683295.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:28:15.794Z,1509683295.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:28:15.794Z,1509683295.794 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:28:15.795Z,1509683295.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:28:15.795Z,1509683295.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:28:16.139Z,1509683296.139 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0101.lzma.bak
2017-11-03T04:28:16.139Z,1509683296.139 [DataOverHttps](INFO): SBD MOMSN=5182701
2017-11-03T04:28:16.199Z,1509683296.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:16.783Z,1509683296.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:16.786Z,1509683296.786 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T04:28:16.786Z,1509683296.786 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T04:28:16.786Z,1509683296.786 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T04:28:17.057Z,1509683297.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:20.210Z,1509683300.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:20.430Z,1509683300.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:20.799Z,1509683300.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:21.195Z,1509683301.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:21.590Z,1509683301.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:22.039Z,1509683302.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:22.409Z,1509683302.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:22.835Z,1509683302.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:23.207Z,1509683303.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:23.630Z,1509683303.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:24.029Z,1509683304.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:24.395Z,1509683304.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:24.794Z,1509683304.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:25.200Z,1509683305.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:25.607Z,1509683305.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:26.003Z,1509683306.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:26.395Z,1509683306.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:26.795Z,1509683306.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:27.202Z,1509683307.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:27.616Z,1509683307.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:28.011Z,1509683308.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:28.390Z,1509683308.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:28.795Z,1509683308.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:29.196Z,1509683309.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:29.603Z,1509683309.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:29.999Z,1509683309.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:30.395Z,1509683310.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:30.790Z,1509683310.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:31.195Z,1509683311.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:31.639Z,1509683311.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:32.000Z,1509683312.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:32.395Z,1509683312.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:32.792Z,1509683312.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:33.262Z,1509683313.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:33.596Z,1509683313.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:33.992Z,1509683313.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:34.410Z,1509683314.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:34.775Z,1509683314.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:35.192Z,1509683315.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:35.598Z,1509683315.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:36.039Z,1509683316.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:36.377Z,1509683316.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:36.781Z,1509683316.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:37.207Z,1509683317.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:37.600Z,1509683317.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:38.143Z,1509683318.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:38.393Z,1509683318.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:38.811Z,1509683318.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:39.193Z,1509683319.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:39.590Z,1509683319.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:40.043Z,1509683320.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:40.400Z,1509683320.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:40.803Z,1509683320.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:41.196Z,1509683321.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:41.595Z,1509683321.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:41.995Z,1509683321.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:42.391Z,1509683322.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:42.798Z,1509683322.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:43.199Z,1509683323.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:43.600Z,1509683323.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:44.000Z,1509683324.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:44.392Z,1509683324.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:44.795Z,1509683324.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:45.008Z,1509683325.008 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:28:45.008Z,1509683325.008 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T04:28:45.008Z,1509683325.008 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:28:45.208Z,1509683325.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:28:45.209Z,1509683325.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:45.289Z,1509683325.289 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:28:45.289Z,1509683325.289 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T04:28:45.416Z,1509683325.416 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:28:45.502Z,1509683325.502 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:28:45.604Z,1509683325.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:28:45.605Z,1509683325.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:46.011Z,1509683326.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:28:46.012Z,1509683326.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:46.393Z,1509683326.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:28:46.394Z,1509683326.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:46.795Z,1509683326.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:28:46.795Z,1509683326.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:47.202Z,1509683327.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:28:47.203Z,1509683327.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:47.605Z,1509683327.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:28:47.606Z,1509683327.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:48.003Z,1509683328.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:28:48.004Z,1509683328.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:48.393Z,1509683328.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:28:48.394Z,1509683328.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:48.799Z,1509683328.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:28:48.800Z,1509683328.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:49.205Z,1509683329.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:28:49.206Z,1509683329.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:49.611Z,1509683329.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:28:49.611Z,1509683329.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:50.003Z,1509683330.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:28:50.004Z,1509683330.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:50.390Z,1509683330.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:28:50.391Z,1509683330.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:50.858Z,1509683330.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T04:28:50.859Z,1509683330.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:51.200Z,1509683331.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:28:51.201Z,1509683331.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:51.639Z,1509683331.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:28:51.640Z,1509683331.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:51.000Z,1509683332.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T04:28:52.001Z,1509683332.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:52.415Z,1509683332.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:28:52.416Z,1509683332.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:52.806Z,1509683332.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T04:28:52.807Z,1509683332.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:53.201Z,1509683333.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:28:53.202Z,1509683333.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:53.602Z,1509683333.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:28:53.603Z,1509683333.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:53.997Z,1509683333.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:28:53.998Z,1509683333.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:54.390Z,1509683334.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:28:54.391Z,1509683334.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:54.794Z,1509683334.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:28:54.795Z,1509683334.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:55.200Z,1509683335.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T04:28:55.201Z,1509683335.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:55.600Z,1509683335.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:28:55.601Z,1509683335.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:56.000Z,1509683336.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:28:56.001Z,1509683336.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:56.392Z,1509683336.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T04:28:56.393Z,1509683336.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:56.792Z,1509683336.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T04:28:56.793Z,1509683336.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:57.204Z,1509683337.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T04:28:57.205Z,1509683337.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:57.602Z,1509683337.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T04:28:57.603Z,1509683337.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:57.000Z,1509683338.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T04:28:58.001Z,1509683338.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:58.392Z,1509683338.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:28:58.393Z,1509683338.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:58.791Z,1509683338.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:28:58.791Z,1509683338.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:59.207Z,1509683339.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:28:59.208Z,1509683339.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:59.603Z,1509683339.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:28:59.605Z,1509683339.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:28:59.000Z,1509683340.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T04:29:00.001Z,1509683340.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:00.398Z,1509683340.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T04:29:00.399Z,1509683340.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:00.798Z,1509683340.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:29:00.799Z,1509683340.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:01.195Z,1509683341.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:29:01.196Z,1509683341.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:01.606Z,1509683341.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T04:29:01.607Z,1509683341.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:02.006Z,1509683342.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T04:29:02.007Z,1509683342.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:02.398Z,1509683342.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T04:29:02.399Z,1509683342.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:02.779Z,1509683342.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T04:29:02.779Z,1509683342.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:03.178Z,1509683343.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T04:29:03.179Z,1509683343.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:03.598Z,1509683343.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T04:29:03.599Z,1509683343.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:03.998Z,1509683343.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T04:29:03.999Z,1509683343.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:04.418Z,1509683344.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:29:04.419Z,1509683344.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:04.827Z,1509683344.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:05.201Z,1509683345.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:05.615Z,1509683345.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:05.978Z,1509683345.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:06.422Z,1509683346.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:06.822Z,1509683346.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:07.201Z,1509683347.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:07.606Z,1509683347.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:08.006Z,1509683348.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:08.403Z,1509683348.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:08.783Z,1509683348.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:09.202Z,1509683349.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:09.601Z,1509683349.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:10.003Z,1509683350.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:10.403Z,1509683350.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:10.778Z,1509683350.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:11.192Z,1509683351.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:11.687Z,1509683351.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:11.988Z,1509683351.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:12.380Z,1509683352.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:12.794Z,1509683352.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:13.200Z,1509683353.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:13.604Z,1509683353.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:14.005Z,1509683354.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:14.392Z,1509683354.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:14.792Z,1509683354.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:15.201Z,1509683355.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:15.603Z,1509683355.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:15.000Z,1509683356.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:16.393Z,1509683356.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:16.806Z,1509683356.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:17.205Z,1509683357.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:20.378Z,1509683360.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:20.535Z,1509683360.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:20.923Z,1509683360.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:21.358Z,1509683361.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:21.717Z,1509683361.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:22.158Z,1509683362.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:22.562Z,1509683362.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:22.926Z,1509683362.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:23.335Z,1509683363.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:23.722Z,1509683363.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:24.120Z,1509683364.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:24.520Z,1509683364.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:24.919Z,1509683364.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:25.335Z,1509683365.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:25.735Z,1509683365.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:26.139Z,1509683366.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:26.517Z,1509683366.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:26.920Z,1509683366.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:27.321Z,1509683367.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:27.721Z,1509683367.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:28.123Z,1509683368.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:28.536Z,1509683368.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:28.931Z,1509683368.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:29.332Z,1509683369.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:29.720Z,1509683369.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:30.119Z,1509683370.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:30.523Z,1509683370.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:30.921Z,1509683370.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:31.335Z,1509683371.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:31.734Z,1509683371.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:32.135Z,1509683372.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:32.523Z,1509683372.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:32.923Z,1509683372.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:33.323Z,1509683373.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:33.722Z,1509683373.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:34.127Z,1509683374.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:34.582Z,1509683374.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:34.927Z,1509683374.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:35.331Z,1509683375.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:35.727Z,1509683375.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:36.119Z,1509683376.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:36.524Z,1509683376.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:36.927Z,1509683376.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:37.333Z,1509683377.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:37.722Z,1509683377.722 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:29:37.722Z,1509683377.722 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:29:37.722Z,1509683377.722 [BPC1](ERROR): Communications Fault
2017-11-03T04:29:37.753Z,1509683377.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:37.860Z,1509683377.860 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:29:38.131Z,1509683378.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:38.526Z,1509683378.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:38.931Z,1509683378.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:39.013Z,1509683379.013 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:29:39.013Z,1509683379.013 [BPC1] No Fault, FailCount= 1
2017-11-03T04:29:39.379Z,1509683379.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:39.722Z,1509683379.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:40.101Z,1509683380.101 [PNI_TCM](ERROR): CRC does not match. Expected:0x19174 got:0x7489
2017-11-03T04:29:40.128Z,1509683380.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:40.535Z,1509683380.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:40.934Z,1509683380.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:41.331Z,1509683381.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:41.726Z,1509683381.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:42.129Z,1509683382.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:42.529Z,1509683382.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:42.930Z,1509683382.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:43.371Z,1509683383.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:43.734Z,1509683383.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:44.134Z,1509683384.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:44.531Z,1509683384.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:44.902Z,1509683384.902 [PNI_TCM](ERROR): CRC does not match. Expected:0x56572 got:0x7489
2017-11-03T04:29:44.935Z,1509683384.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:45.331Z,1509683385.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:45.731Z,1509683385.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:46.135Z,1509683386.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:46.511Z,1509683386.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x32893 got:0x7489
2017-11-03T04:29:46.535Z,1509683386.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:46.943Z,1509683386.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:47.331Z,1509683387.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:47.746Z,1509683387.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:48.111Z,1509683388.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:48.511Z,1509683388.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:48.905Z,1509683388.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:49.333Z,1509683389.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:49.739Z,1509683389.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:50.135Z,1509683390.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:50.507Z,1509683390.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:50.935Z,1509683390.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:51.303Z,1509683391.303 [PNI_TCM](ERROR): CRC does not match. Expected:0x756 got:0x16718
2017-11-03T04:29:51.335Z,1509683391.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:51.711Z,1509683391.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:52.108Z,1509683392.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:52.532Z,1509683392.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:52.935Z,1509683392.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:53.339Z,1509683393.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:53.711Z,1509683393.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:54.134Z,1509683394.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:54.508Z,1509683394.508 [PNI_TCM](ERROR): CRC does not match. Expected:0x61718 got:0x7489
2017-11-03T04:29:54.561Z,1509683394.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:54.934Z,1509683394.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:55.339Z,1509683395.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:55.762Z,1509683395.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:56.134Z,1509683396.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:56.550Z,1509683396.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:56.951Z,1509683396.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:57.334Z,1509683397.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:57.701Z,1509683397.701 [PNI_TCM](ERROR): CRC does not match. Expected:0x65254 got:0x6593
2017-11-03T04:29:57.739Z,1509683397.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:58.134Z,1509683398.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:58.533Z,1509683398.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:58.930Z,1509683398.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:59.330Z,1509683399.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:29:59.734Z,1509683399.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:00.111Z,1509683400.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:00.534Z,1509683400.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:00.900Z,1509683400.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x64427 got:0x16718
2017-11-03T04:30:00.938Z,1509683400.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:01.312Z,1509683401.312 [PNI_TCM](ERROR): CRC does not match. Expected:0x8984 got:0x189
2017-11-03T04:30:01.339Z,1509683401.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:01.739Z,1509683401.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:02.131Z,1509683402.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:02.508Z,1509683402.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:02.933Z,1509683402.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:03.309Z,1509683403.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:03.735Z,1509683403.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:04.103Z,1509683404.103 [PNI_TCM](ERROR): CRC does not match. Expected:0x55834 got:0x16718
2017-11-03T04:30:04.139Z,1509683404.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:04.538Z,1509683404.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:04.931Z,1509683404.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:05.330Z,1509683405.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:05.763Z,1509683405.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:06.102Z,1509683406.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x17150 got:0x151
2017-11-03T04:30:06.139Z,1509683406.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:06.508Z,1509683406.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:06.929Z,1509683406.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:07.329Z,1509683407.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:07.759Z,1509683407.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:08.138Z,1509683408.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:08.537Z,1509683408.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:08.940Z,1509683408.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:09.309Z,1509683409.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:09.719Z,1509683409.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:10.147Z,1509683410.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:10.542Z,1509683410.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:10.967Z,1509683410.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:11.359Z,1509683411.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:11.742Z,1509683411.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:12.104Z,1509683412.104 [PNI_TCM](ERROR): CRC does not match. Expected:0x56547 got:0x16718
2017-11-03T04:30:12.146Z,1509683412.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:12.515Z,1509683412.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:12.914Z,1509683412.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:13.343Z,1509683413.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:13.739Z,1509683413.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:14.140Z,1509683414.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:14.512Z,1509683414.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:14.915Z,1509683414.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:15.310Z,1509683415.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:15.711Z,1509683415.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:16.111Z,1509683416.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:16.542Z,1509683416.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:16.939Z,1509683416.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:17.343Z,1509683417.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:20.449Z,1509683420.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:20.589Z,1509683420.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:20.994Z,1509683420.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:21.394Z,1509683421.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:21.801Z,1509683421.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:22.211Z,1509683422.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:22.590Z,1509683422.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:22.990Z,1509683422.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:23.442Z,1509683423.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:23.799Z,1509683423.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:24.238Z,1509683424.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:24.595Z,1509683424.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:25.011Z,1509683425.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:25.393Z,1509683425.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:25.804Z,1509683425.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:26.203Z,1509683426.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:26.598Z,1509683426.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:26.996Z,1509683426.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:27.393Z,1509683427.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:27.799Z,1509683427.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:28.201Z,1509683428.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:28.595Z,1509683428.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:28.988Z,1509683428.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:29.380Z,1509683429.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:29.779Z,1509683429.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:30.206Z,1509683430.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:30.607Z,1509683430.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:31.009Z,1509683431.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:31.381Z,1509683431.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:31.780Z,1509683431.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:32.208Z,1509683432.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:32.606Z,1509683432.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:33.006Z,1509683433.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:33.379Z,1509683433.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:33.776Z,1509683433.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:34.207Z,1509683434.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:34.588Z,1509683434.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:35.005Z,1509683435.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:35.380Z,1509683435.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:35.775Z,1509683435.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:36.208Z,1509683436.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:36.651Z,1509683436.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:37.008Z,1509683437.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:37.380Z,1509683437.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:37.826Z,1509683437.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:38.192Z,1509683438.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:38.627Z,1509683438.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:39.010Z,1509683439.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:39.411Z,1509683439.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:39.815Z,1509683439.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:40.192Z,1509683440.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:40.591Z,1509683440.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:40.984Z,1509683440.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:41.380Z,1509683441.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:41.778Z,1509683441.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:42.208Z,1509683442.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:42.592Z,1509683442.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:42.992Z,1509683442.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:43.378Z,1509683443.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:43.779Z,1509683443.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:44.178Z,1509683444.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:44.592Z,1509683444.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:44.992Z,1509683444.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:45.391Z,1509683445.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:45.779Z,1509683445.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:46.191Z,1509683446.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:46.579Z,1509683446.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:46.983Z,1509683446.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:47.389Z,1509683447.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:47.796Z,1509683447.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:48.212Z,1509683448.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:48.583Z,1509683448.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:48.982Z,1509683448.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:49.383Z,1509683449.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:49.783Z,1509683449.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:50.234Z,1509683450.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:50.596Z,1509683450.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:50.988Z,1509683450.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:51.383Z,1509683451.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:51.783Z,1509683451.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:52.234Z,1509683452.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:52.596Z,1509683452.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:53.031Z,1509683453.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:53.383Z,1509683453.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:53.814Z,1509683453.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:54.231Z,1509683454.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:54.588Z,1509683454.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:54.996Z,1509683454.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:55.383Z,1509683455.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:55.783Z,1509683455.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:56.188Z,1509683456.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:56.591Z,1509683456.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:56.996Z,1509683456.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:57.438Z,1509683457.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:57.831Z,1509683457.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:58.233Z,1509683458.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:58.614Z,1509683458.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:59.007Z,1509683459.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:59.435Z,1509683459.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:30:59.794Z,1509683459.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:00.209Z,1509683460.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:00.671Z,1509683460.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:01.030Z,1509683461.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:01.413Z,1509683461.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:01.814Z,1509683461.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:02.226Z,1509683462.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:02.615Z,1509683462.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:03.011Z,1509683463.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:03.416Z,1509683463.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:03.803Z,1509683463.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:04.215Z,1509683464.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:04.655Z,1509683464.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:05.071Z,1509683465.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:05.432Z,1509683465.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:05.801Z,1509683465.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:06.220Z,1509683466.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:06.574Z,1509683466.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:07.003Z,1509683467.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:07.385Z,1509683467.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:07.815Z,1509683467.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:08.247Z,1509683468.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:08.583Z,1509683468.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:08.977Z,1509683468.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:09.376Z,1509683469.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:09.783Z,1509683469.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:10.184Z,1509683470.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:10.591Z,1509683470.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:10.989Z,1509683470.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:11.378Z,1509683471.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:11.778Z,1509683471.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:12.195Z,1509683472.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:12.592Z,1509683472.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:12.992Z,1509683472.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:13.397Z,1509683473.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:13.778Z,1509683473.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:14.222Z,1509683474.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:14.593Z,1509683474.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:14.995Z,1509683474.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:15.390Z,1509683475.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:15.783Z,1509683475.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:16.215Z,1509683476.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:16.215Z,1509683476.215 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2017-11-03T04:31:16.215Z,1509683476.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:31:16.217Z,1509683476.217 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:16.217Z,1509683476.217 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2017-11-03T04:31:16.217Z,1509683476.217 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:31:16.222Z,1509683476.222 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:16.222Z,1509683476.222 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2017-11-03T04:31:16.222Z,1509683476.222 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:31:16.313Z,1509683476.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:31:16.313Z,1509683476.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:31:16.313Z,1509683476.313 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:31:16.681Z,1509683476.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:31:16.681Z,1509683476.681 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2017-11-03T04:31:16.681Z,1509683476.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:31:16.681Z,1509683476.681 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2017-11-03T04:31:16.682Z,1509683476.682 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:31:16.682Z,1509683476.682 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2017-11-03T04:31:17.011Z,1509683477.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:31:17.011Z,1509683477.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:31:17.011Z,1509683477.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:31:17.012Z,1509683477.012 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:31:17.021Z,1509683477.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:31:17.021Z,1509683477.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:31:17.021Z,1509683477.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:31:17.022Z,1509683477.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:31:17.022Z,1509683477.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:31:17.442Z,1509683477.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:31:17.442Z,1509683477.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:22.989Z,1509683482.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:31:22.990Z,1509683482.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:23.216Z,1509683483.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T04:31:23.217Z,1509683483.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:23.572Z,1509683483.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T04:31:23.573Z,1509683483.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:23.976Z,1509683483.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T04:31:23.977Z,1509683483.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:24.394Z,1509683484.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T04:31:24.395Z,1509683484.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:24.763Z,1509683484.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T04:31:24.764Z,1509683484.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:25.174Z,1509683485.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T04:31:25.175Z,1509683485.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:25.610Z,1509683485.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T04:31:25.611Z,1509683485.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:25.978Z,1509683485.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-03T04:31:25.979Z,1509683485.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:26.382Z,1509683486.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-03T04:31:26.383Z,1509683486.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:26.764Z,1509683486.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T04:31:26.765Z,1509683486.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:27.161Z,1509683487.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T04:31:27.162Z,1509683487.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:27.566Z,1509683487.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T04:31:27.567Z,1509683487.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:27.964Z,1509683487.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T04:31:27.965Z,1509683487.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:28.371Z,1509683488.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T04:31:28.372Z,1509683488.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:28.775Z,1509683488.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T04:31:28.777Z,1509683488.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:29.182Z,1509683489.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T04:31:29.183Z,1509683489.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:29.570Z,1509683489.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T04:31:29.571Z,1509683489.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:29.966Z,1509683489.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T04:31:29.967Z,1509683489.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:30.363Z,1509683490.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T04:31:30.364Z,1509683490.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:30.763Z,1509683490.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T04:31:30.764Z,1509683490.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:31.166Z,1509683491.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T04:31:31.167Z,1509683491.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:31.570Z,1509683491.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T04:31:31.571Z,1509683491.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:31.978Z,1509683491.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T04:31:31.979Z,1509683491.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:32.382Z,1509683492.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T04:31:32.383Z,1509683492.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:32.766Z,1509683492.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T04:31:32.767Z,1509683492.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:33.164Z,1509683493.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T04:31:33.165Z,1509683493.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:33.565Z,1509683493.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T04:31:33.566Z,1509683493.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:33.966Z,1509683493.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T04:31:33.967Z,1509683493.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:34.378Z,1509683494.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T04:31:34.379Z,1509683494.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:34.772Z,1509683494.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T04:31:34.773Z,1509683494.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:35.172Z,1509683495.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T04:31:35.173Z,1509683495.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:35.557Z,1509683495.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T04:31:35.558Z,1509683495.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:35.947Z,1509683495.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T04:31:35.947Z,1509683495.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:36.395Z,1509683496.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:36.769Z,1509683496.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:37.170Z,1509683497.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:37.577Z,1509683497.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:37.975Z,1509683497.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:38.382Z,1509683498.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:38.766Z,1509683498.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:39.168Z,1509683499.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:39.570Z,1509683499.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:39.947Z,1509683499.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:40.372Z,1509683500.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:40.766Z,1509683500.766 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:31:40.766Z,1509683500.766 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:31:40.767Z,1509683500.767 [BPC1](ERROR): Communications Fault
2017-11-03T04:31:40.778Z,1509683500.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:40.881Z,1509683500.881 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:31:41.179Z,1509683501.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:41.573Z,1509683501.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:41.974Z,1509683501.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:42.065Z,1509683502.065 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:31:42.066Z,1509683502.066 [BPC1] No Fault, FailCount= 1
2017-11-03T04:31:42.419Z,1509683502.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:42.774Z,1509683502.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:43.191Z,1509683503.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:43.579Z,1509683503.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:43.978Z,1509683503.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:44.375Z,1509683504.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:44.772Z,1509683504.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:45.173Z,1509683505.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:45.261Z,1509683505.261 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T04:31:45.573Z,1509683505.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:45.950Z,1509683505.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:46.371Z,1509683506.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:46.774Z,1509683506.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:47.173Z,1509683507.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:47.565Z,1509683507.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:47.954Z,1509683507.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:48.348Z,1509683508.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:48.753Z,1509683508.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:49.154Z,1509683509.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:49.573Z,1509683509.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:49.972Z,1509683509.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:50.379Z,1509683510.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:50.756Z,1509683510.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:51.151Z,1509683511.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:51.575Z,1509683511.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:51.951Z,1509683511.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:52.378Z,1509683512.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:52.780Z,1509683512.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:53.179Z,1509683513.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:53.557Z,1509683513.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:54.010Z,1509683514.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:54.359Z,1509683514.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:54.791Z,1509683514.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:55.157Z,1509683515.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:55.602Z,1509683515.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:56.014Z,1509683516.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:56.383Z,1509683516.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:56.755Z,1509683516.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:57.155Z,1509683517.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:57.556Z,1509683517.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:57.956Z,1509683517.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:58.382Z,1509683518.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:58.781Z,1509683518.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:59.180Z,1509683519.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:59.558Z,1509683519.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:31:59.954Z,1509683519.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:00.363Z,1509683520.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:00.759Z,1509683520.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:01.154Z,1509683521.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:01.579Z,1509683521.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:01.986Z,1509683521.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:02.381Z,1509683522.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:02.759Z,1509683522.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:03.155Z,1509683523.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:03.555Z,1509683523.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:03.955Z,1509683523.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:04.382Z,1509683524.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:04.783Z,1509683524.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:05.179Z,1509683525.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:05.555Z,1509683525.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:05.979Z,1509683525.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:06.355Z,1509683526.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:06.756Z,1509683526.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:07.199Z,1509683527.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:07.588Z,1509683527.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:08.006Z,1509683528.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:08.367Z,1509683528.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:08.795Z,1509683528.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:09.190Z,1509683529.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:09.555Z,1509683529.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:09.963Z,1509683529.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:10.386Z,1509683530.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:10.784Z,1509683530.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:11.186Z,1509683531.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:11.563Z,1509683531.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:11.954Z,1509683531.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:12.363Z,1509683532.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:12.758Z,1509683532.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:13.153Z,1509683533.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:13.587Z,1509683533.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:13.985Z,1509683533.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:14.367Z,1509683534.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:14.759Z,1509683534.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:15.154Z,1509683535.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:15.554Z,1509683535.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:15.963Z,1509683535.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:16.386Z,1509683536.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:16.783Z,1509683536.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:17.184Z,1509683537.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:17.563Z,1509683537.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:20.706Z,1509683540.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:20.895Z,1509683540.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:21.319Z,1509683541.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:21.694Z,1509683541.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:22.123Z,1509683542.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:22.494Z,1509683542.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:22.910Z,1509683542.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:23.311Z,1509683543.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:23.695Z,1509683543.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:24.069Z,1509683544.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:24.489Z,1509683544.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:24.893Z,1509683544.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:25.293Z,1509683545.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:25.691Z,1509683545.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:26.090Z,1509683546.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:26.466Z,1509683546.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:26.867Z,1509683546.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:27.290Z,1509683547.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:27.691Z,1509683547.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:28.093Z,1509683548.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:28.493Z,1509683548.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:28.869Z,1509683548.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:29.271Z,1509683549.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:29.696Z,1509683549.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:30.066Z,1509683550.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:30.491Z,1509683550.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:30.902Z,1509683550.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:31.298Z,1509683551.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:31.668Z,1509683551.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:32.091Z,1509683552.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:32.467Z,1509683552.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:32.867Z,1509683552.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:33.291Z,1509683553.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:33.692Z,1509683553.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:34.119Z,1509683554.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:34.471Z,1509683554.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:34.870Z,1509683554.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:35.315Z,1509683555.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:35.671Z,1509683555.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:36.066Z,1509683556.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:36.536Z,1509683556.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:36.898Z,1509683556.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:37.339Z,1509683557.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:37.710Z,1509683557.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:38.070Z,1509683558.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:38.476Z,1509683558.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:38.875Z,1509683558.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:39.304Z,1509683559.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:39.704Z,1509683559.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:40.101Z,1509683560.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:40.503Z,1509683560.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:40.874Z,1509683560.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:41.282Z,1509683561.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:41.678Z,1509683561.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:42.074Z,1509683562.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:42.508Z,1509683562.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:42.884Z,1509683562.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:43.280Z,1509683563.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:43.683Z,1509683563.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:44.075Z,1509683564.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:44.480Z,1509683564.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:44.878Z,1509683564.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:45.277Z,1509683565.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:45.680Z,1509683565.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:46.080Z,1509683566.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:46.480Z,1509683566.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:46.877Z,1509683566.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:47.276Z,1509683567.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:47.679Z,1509683567.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:48.079Z,1509683568.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:48.527Z,1509683568.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:48.882Z,1509683568.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:49.288Z,1509683569.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:49.682Z,1509683569.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:50.130Z,1509683570.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:50.479Z,1509683570.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:50.883Z,1509683570.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:51.318Z,1509683571.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:51.709Z,1509683571.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:52.119Z,1509683572.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:52.514Z,1509683572.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:52.880Z,1509683572.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:53.271Z,1509683573.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:53.675Z,1509683573.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:54.081Z,1509683574.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:54.484Z,1509683574.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:54.906Z,1509683574.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:55.285Z,1509683575.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:55.685Z,1509683575.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:56.078Z,1509683576.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:56.478Z,1509683576.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:56.871Z,1509683576.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:57.284Z,1509683577.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:57.686Z,1509683577.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:58.107Z,1509683578.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:58.475Z,1509683578.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:58.872Z,1509683578.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:59.283Z,1509683579.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:32:59.683Z,1509683579.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:00.083Z,1509683580.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:00.485Z,1509683580.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:00.887Z,1509683580.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:01.314Z,1509683581.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:01.671Z,1509683581.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:02.079Z,1509683582.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:02.481Z,1509683582.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:02.891Z,1509683582.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:03.334Z,1509683583.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:03.691Z,1509683583.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:04.086Z,1509683584.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:04.491Z,1509683584.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:04.927Z,1509683584.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:05.289Z,1509683585.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:05.716Z,1509683585.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:06.077Z,1509683586.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:06.522Z,1509683586.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:06.923Z,1509683586.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:07.293Z,1509683587.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:07.697Z,1509683587.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:08.077Z,1509683588.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:08.482Z,1509683588.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:08.881Z,1509683588.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:09.287Z,1509683589.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:09.694Z,1509683589.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:10.087Z,1509683590.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:10.479Z,1509683590.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:10.877Z,1509683590.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:11.272Z,1509683591.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:11.679Z,1509683591.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:12.077Z,1509683592.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:12.484Z,1509683592.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:12.891Z,1509683592.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:13.294Z,1509683593.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:13.681Z,1509683593.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:14.102Z,1509683594.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:14.490Z,1509683594.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:14.873Z,1509683594.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:15.295Z,1509683595.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:15.715Z,1509683595.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:16.091Z,1509683596.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:16.486Z,1509683596.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:16.881Z,1509683596.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:17.297Z,1509683597.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:17.302Z,1509683597.302 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T04:33:17.302Z,1509683597.302 [Default:CheckIn:C.Wait] Stopped
2017-11-03T04:33:17.302Z,1509683597.302 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T04:33:17.302Z,1509683597.302 [Default:CheckIn:D] Running Loop=1
2017-11-03T04:33:17.727Z,1509683597.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:17.734Z,1509683597.734 [Default:CheckIn:D] Stopped
2017-11-03T04:33:17.734Z,1509683597.734 [Default:CheckIn:E] Running Loop=1
2017-11-03T04:33:20.792Z,1509683600.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:20.796Z,1509683600.796 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 258.169466 min 
2017-11-03T04:33:20.796Z,1509683600.796 [Default:CheckIn:E] Stopped
2017-11-03T04:33:20.796Z,1509683600.796 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T04:33:20.796Z,1509683600.796 [Default:CheckIn] Stopped
2017-11-03T04:33:20.796Z,1509683600.796 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T04:33:20.797Z,1509683600.797 [Default:CheckIn](INFO): Running loop #26
2017-11-03T04:33:20.797Z,1509683600.797 [Default:CheckIn] Running Loop=26
2017-11-03T04:33:20.797Z,1509683600.797 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T04:33:20.797Z,1509683600.797 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T04:33:20.958Z,1509683600.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:21.346Z,1509683601.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:21.788Z,1509683601.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:22.120Z,1509683602.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:22.567Z,1509683602.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:22.948Z,1509683602.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:23.348Z,1509683603.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:23.744Z,1509683603.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:24.149Z,1509683604.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:24.527Z,1509683604.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:24.923Z,1509683604.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:25.323Z,1509683605.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:25.727Z,1509683605.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:26.120Z,1509683606.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:26.549Z,1509683606.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:26.947Z,1509683606.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:27.349Z,1509683607.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:27.720Z,1509683607.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:28.120Z,1509683608.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:28.545Z,1509683608.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:28.926Z,1509683608.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:29.348Z,1509683609.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:29.745Z,1509683609.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:30.152Z,1509683610.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:30.550Z,1509683610.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:30.924Z,1509683610.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:31.349Z,1509683611.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:31.751Z,1509683611.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:32.126Z,1509683612.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:32.555Z,1509683612.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:32.955Z,1509683612.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:33.375Z,1509683613.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:33.724Z,1509683613.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:34.124Z,1509683614.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:34.523Z,1509683614.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:34.963Z,1509683614.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:35.348Z,1509683615.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:35.768Z,1509683615.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:36.163Z,1509683616.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:36.526Z,1509683616.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:36.959Z,1509683616.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:37.351Z,1509683617.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:37.729Z,1509683617.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:38.124Z,1509683618.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:38.551Z,1509683618.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:38.948Z,1509683618.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:39.351Z,1509683619.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:39.725Z,1509683619.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:40.127Z,1509683620.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:40.524Z,1509683620.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:40.923Z,1509683620.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:41.349Z,1509683621.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:41.751Z,1509683621.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:42.148Z,1509683622.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:42.531Z,1509683622.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:42.930Z,1509683622.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:43.326Z,1509683623.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:43.725Z,1509683623.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:44.127Z,1509683624.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:44.551Z,1509683624.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:44.948Z,1509683624.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:45.351Z,1509683625.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:45.723Z,1509683625.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:46.126Z,1509683626.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:46.526Z,1509683626.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:46.922Z,1509683626.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:47.349Z,1509683627.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:47.771Z,1509683627.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:48.151Z,1509683628.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:48.523Z,1509683628.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:48.922Z,1509683628.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:49.325Z,1509683629.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:49.766Z,1509683629.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:50.122Z,1509683630.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:50.574Z,1509683630.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:50.953Z,1509683630.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:51.367Z,1509683631.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:51.756Z,1509683631.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:52.123Z,1509683632.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:52.530Z,1509683632.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:52.931Z,1509683632.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:53.353Z,1509683633.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:53.735Z,1509683633.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:54.135Z,1509683634.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:54.527Z,1509683634.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:54.922Z,1509683634.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:55.324Z,1509683635.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:55.727Z,1509683635.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:56.125Z,1509683636.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:56.553Z,1509683636.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:56.935Z,1509683636.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:57.354Z,1509683637.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:57.731Z,1509683637.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:58.123Z,1509683638.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:58.523Z,1509683638.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:58.931Z,1509683638.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:59.353Z,1509683639.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:33:59.754Z,1509683639.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:00.155Z,1509683640.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:00.527Z,1509683640.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:00.930Z,1509683640.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:01.324Z,1509683641.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:01.724Z,1509683641.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:02.174Z,1509683642.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:02.555Z,1509683642.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:02.953Z,1509683642.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:03.352Z,1509683643.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:03.774Z,1509683643.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:04.131Z,1509683644.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:04.529Z,1509683644.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:04.966Z,1509683644.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:05.359Z,1509683645.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:05.767Z,1509683645.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:06.175Z,1509683646.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:06.534Z,1509683646.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:06.934Z,1509683646.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:07.330Z,1509683647.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:07.731Z,1509683647.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:08.126Z,1509683648.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:08.533Z,1509683648.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:08.957Z,1509683648.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:09.332Z,1509683649.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:09.727Z,1509683649.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:10.135Z,1509683650.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:10.530Z,1509683650.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:10.927Z,1509683650.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:11.333Z,1509683651.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:11.757Z,1509683651.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:12.159Z,1509683652.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:12.527Z,1509683652.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:12.928Z,1509683652.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:13.331Z,1509683653.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:13.735Z,1509683653.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:14.127Z,1509683654.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:14.540Z,1509683654.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:14.953Z,1509683654.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:15.358Z,1509683655.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:15.727Z,1509683655.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:16.127Z,1509683656.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:16.531Z,1509683656.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:16.928Z,1509683656.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:17.357Z,1509683657.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:17.357Z,1509683657.357 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2017-11-03T04:34:17.357Z,1509683657.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:34:17.359Z,1509683657.359 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:17.359Z,1509683657.359 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2017-11-03T04:34:17.359Z,1509683657.359 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:34:17.361Z,1509683657.361 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:17.361Z,1509683657.361 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2017-11-03T04:34:17.361Z,1509683657.361 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:34:17.437Z,1509683657.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:34:17.437Z,1509683657.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:34:17.437Z,1509683657.437 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:34:17.809Z,1509683657.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:34:17.809Z,1509683657.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2017-11-03T04:34:17.810Z,1509683657.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:34:17.810Z,1509683657.810 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2017-11-03T04:34:17.810Z,1509683657.810 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:34:17.810Z,1509683657.810 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2017-11-03T04:34:20.876Z,1509683660.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:34:20.876Z,1509683660.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:34:20.877Z,1509683660.877 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:34:20.888Z,1509683660.888 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:34:20.889Z,1509683660.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:34:20.889Z,1509683660.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:34:20.889Z,1509683660.889 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:34:20.890Z,1509683660.890 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:34:20.890Z,1509683660.890 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:34:21.029Z,1509683661.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T04:34:21.030Z,1509683661.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:21.432Z,1509683661.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T04:34:21.433Z,1509683661.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:21.862Z,1509683661.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T04:34:21.863Z,1509683661.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:22.235Z,1509683662.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T04:34:22.236Z,1509683662.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:22.677Z,1509683662.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T04:34:22.678Z,1509683662.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:23.064Z,1509683663.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T04:34:23.081Z,1509683663.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:23.432Z,1509683663.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T04:34:23.433Z,1509683663.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:23.831Z,1509683663.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T04:34:23.832Z,1509683663.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:24.236Z,1509683664.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T04:34:24.237Z,1509683664.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:24.635Z,1509683664.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T04:34:24.637Z,1509683664.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:25.037Z,1509683665.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T04:34:25.038Z,1509683665.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:25.433Z,1509683665.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T04:34:25.434Z,1509683665.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:25.831Z,1509683665.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T04:34:25.832Z,1509683665.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:26.242Z,1509683666.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T04:34:26.243Z,1509683666.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:26.637Z,1509683666.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T04:34:26.638Z,1509683666.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:27.042Z,1509683667.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T04:34:27.043Z,1509683667.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:27.416Z,1509683667.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T04:34:27.433Z,1509683667.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:27.842Z,1509683667.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T04:34:27.843Z,1509683667.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:28.239Z,1509683668.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T04:34:28.241Z,1509683668.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:28.639Z,1509683668.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T04:34:28.640Z,1509683668.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:29.046Z,1509683669.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T04:34:29.047Z,1509683669.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:29.417Z,1509683669.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T04:34:29.418Z,1509683669.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:29.842Z,1509683669.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T04:34:29.843Z,1509683669.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:30.246Z,1509683670.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T04:34:30.247Z,1509683670.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:30.642Z,1509683670.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T04:34:30.643Z,1509683670.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:31.042Z,1509683671.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T04:34:31.043Z,1509683671.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:31.416Z,1509683671.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T04:34:31.417Z,1509683671.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:31.816Z,1509683671.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T04:34:31.817Z,1509683671.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:32.242Z,1509683672.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T04:34:32.243Z,1509683672.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:32.643Z,1509683672.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T04:34:32.644Z,1509683672.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:33.042Z,1509683673.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T04:34:33.043Z,1509683673.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:33.415Z,1509683673.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T04:34:33.416Z,1509683673.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:33.822Z,1509683673.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T04:34:33.823Z,1509683673.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:34.240Z,1509683674.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T04:34:34.242Z,1509683674.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:34.699Z,1509683674.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T04:34:34.699Z,1509683674.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:35.043Z,1509683675.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T04:34:35.044Z,1509683675.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:35.416Z,1509683675.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T04:34:35.417Z,1509683675.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:35.854Z,1509683675.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T04:34:35.855Z,1509683675.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:36.244Z,1509683676.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T04:34:36.245Z,1509683676.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:36.658Z,1509683676.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T04:34:36.659Z,1509683676.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:37.058Z,1509683677.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T04:34:37.059Z,1509683677.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:37.414Z,1509683677.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:37.815Z,1509683677.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:38.242Z,1509683678.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:38.645Z,1509683678.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:39.041Z,1509683679.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:39.415Z,1509683679.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:39.814Z,1509683679.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:40.243Z,1509683680.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:40.642Z,1509683680.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:41.043Z,1509683681.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:41.415Z,1509683681.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:41.838Z,1509683681.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:42.238Z,1509683682.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:42.652Z,1509683682.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:43.042Z,1509683683.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:43.438Z,1509683683.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:43.827Z,1509683683.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:44.260Z,1509683684.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:44.640Z,1509683684.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:45.043Z,1509683685.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:45.418Z,1509683685.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:45.815Z,1509683685.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:46.238Z,1509683686.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:46.647Z,1509683686.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:47.040Z,1509683687.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:47.442Z,1509683687.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:47.815Z,1509683687.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:48.240Z,1509683688.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:48.647Z,1509683688.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:49.067Z,1509683689.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:49.458Z,1509683689.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:49.839Z,1509683689.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:50.271Z,1509683690.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:50.642Z,1509683690.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:51.071Z,1509683691.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:51.455Z,1509683691.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:51.819Z,1509683691.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:52.247Z,1509683692.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:52.642Z,1509683692.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:53.042Z,1509683693.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:53.417Z,1509683693.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:53.816Z,1509683693.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:54.239Z,1509683694.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:54.636Z,1509683694.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:55.036Z,1509683695.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:55.416Z,1509683695.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:55.839Z,1509683695.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:56.237Z,1509683696.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:56.644Z,1509683696.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:57.043Z,1509683697.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:57.415Z,1509683697.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:57.814Z,1509683697.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:58.241Z,1509683698.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:58.582Z,1509683698.582 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T04:34:58.582Z,1509683698.582 [NAL9602] Data Fault, FailCount= 4
2017-11-03T04:34:58.582Z,1509683698.582 [NAL9602](ERROR): Data Fault
2017-11-03T04:34:58.619Z,1509683698.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:58.730Z,1509683698.730 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T04:34:58.986Z,1509683698.986 [NAL9602](INFO): Powering down
2017-11-03T04:34:59.018Z,1509683699.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:59.421Z,1509683699.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:59.818Z,1509683699.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:34:59.930Z,1509683699.930 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T04:34:59.930Z,1509683699.930 [NAL9602] No Fault, FailCount= 4
2017-11-03T04:35:00.214Z,1509683700.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:00.620Z,1509683700.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:01.019Z,1509683701.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:01.442Z,1509683701.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:01.817Z,1509683701.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:02.218Z,1509683702.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:02.622Z,1509683702.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:03.021Z,1509683703.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:03.465Z,1509683703.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:03.867Z,1509683703.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:04.219Z,1509683704.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:04.622Z,1509683704.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:05.046Z,1509683705.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:05.422Z,1509683705.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:05.848Z,1509683705.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:06.249Z,1509683706.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:06.623Z,1509683706.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:07.022Z,1509683707.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:07.422Z,1509683707.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:07.827Z,1509683707.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:08.230Z,1509683708.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:08.623Z,1509683708.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:09.023Z,1509683709.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:09.422Z,1509683709.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:09.823Z,1509683709.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:10.219Z,1509683710.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:10.623Z,1509683710.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:11.019Z,1509683711.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:11.423Z,1509683711.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:11.822Z,1509683711.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:12.221Z,1509683712.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:12.622Z,1509683712.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:13.022Z,1509683713.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:13.422Z,1509683713.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:13.822Z,1509683713.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:14.221Z,1509683714.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:14.621Z,1509683714.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:15.022Z,1509683715.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:15.422Z,1509683715.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:15.823Z,1509683715.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:16.222Z,1509683716.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:16.622Z,1509683716.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:17.022Z,1509683717.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:17.422Z,1509683717.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:17.824Z,1509683717.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:20.979Z,1509683720.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:21.155Z,1509683721.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:21.530Z,1509683721.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:21.951Z,1509683721.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:22.326Z,1509683722.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:22.770Z,1509683722.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:23.163Z,1509683723.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:23.526Z,1509683723.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:23.925Z,1509683723.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:24.325Z,1509683724.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:24.726Z,1509683724.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:25.126Z,1509683725.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:25.526Z,1509683725.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:25.929Z,1509683725.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:26.325Z,1509683726.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:26.726Z,1509683726.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:27.126Z,1509683727.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:27.526Z,1509683727.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:27.925Z,1509683727.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:28.326Z,1509683728.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:28.751Z,1509683728.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:29.094Z,1509683729.094 [NAL9602](INFO): Powering up NAL9602
2017-11-03T04:35:29.127Z,1509683729.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:29.529Z,1509683729.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:29.952Z,1509683729.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:30.325Z,1509683730.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:30.727Z,1509683730.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:31.150Z,1509683731.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:31.526Z,1509683731.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:31.953Z,1509683731.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:32.326Z,1509683732.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:32.725Z,1509683732.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:33.126Z,1509683733.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:33.526Z,1509683733.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:33.953Z,1509683733.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:34.349Z,1509683734.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:34.749Z,1509683734.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:35.192Z,1509683735.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:35.526Z,1509683735.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:35.956Z,1509683735.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:36.354Z,1509683736.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:36.726Z,1509683736.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:37.159Z,1509683737.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:37.555Z,1509683737.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:37.926Z,1509683737.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:38.356Z,1509683738.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:38.726Z,1509683738.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:39.128Z,1509683739.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:39.555Z,1509683739.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:39.895Z,1509683739.895 [NAL9602](INFO): NAL9602 initialized
2017-11-03T04:35:39.935Z,1509683739.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:40.330Z,1509683740.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:40.756Z,1509683740.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:41.156Z,1509683741.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:41.532Z,1509683741.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:41.935Z,1509683741.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:42.334Z,1509683742.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:42.753Z,1509683742.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:43.156Z,1509683743.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:43.555Z,1509683743.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:43.932Z,1509683743.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:44.328Z,1509683744.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:44.736Z,1509683744.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:45.135Z,1509683745.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:45.528Z,1509683745.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:45.963Z,1509683745.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:46.354Z,1509683746.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:46.757Z,1509683746.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:47.136Z,1509683747.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:47.536Z,1509683747.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:47.940Z,1509683747.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:48.337Z,1509683748.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:48.740Z,1509683748.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:49.165Z,1509683749.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:49.602Z,1509683749.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:49.933Z,1509683749.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:50.362Z,1509683750.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:50.748Z,1509683750.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:51.167Z,1509683751.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:51.531Z,1509683751.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:51.974Z,1509683751.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:52.340Z,1509683752.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:52.767Z,1509683752.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:53.130Z,1509683753.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:53.535Z,1509683753.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:53.934Z,1509683753.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:54.373Z,1509683754.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:54.782Z,1509683754.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:55.144Z,1509683755.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:55.551Z,1509683755.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:55.945Z,1509683755.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:56.388Z,1509683756.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:56.759Z,1509683756.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:57.159Z,1509683757.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:57.586Z,1509683757.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:57.960Z,1509683757.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:58.367Z,1509683758.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:58.791Z,1509683758.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:59.162Z,1509683759.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:35:59.565Z,1509683759.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:00.014Z,1509683760.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:00.364Z,1509683760.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:00.764Z,1509683760.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:01.170Z,1509683761.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:01.564Z,1509683761.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:01.959Z,1509683761.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:02.360Z,1509683762.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:02.807Z,1509683762.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:03.155Z,1509683763.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:03.569Z,1509683763.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:04.019Z,1509683764.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:04.353Z,1509683764.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:04.799Z,1509683764.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:05.147Z,1509683765.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:05.587Z,1509683765.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:05.995Z,1509683765.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:06.336Z,1509683766.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:06.748Z,1509683766.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:07.144Z,1509683767.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:07.555Z,1509683767.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:07.936Z,1509683767.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:08.352Z,1509683768.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:08.737Z,1509683768.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:09.128Z,1509683769.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:09.529Z,1509683769.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:09.941Z,1509683769.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:10.340Z,1509683770.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:10.744Z,1509683770.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:11.135Z,1509683771.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:11.527Z,1509683771.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:11.923Z,1509683771.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:12.335Z,1509683772.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:12.736Z,1509683772.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:13.150Z,1509683773.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:13.561Z,1509683773.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:13.927Z,1509683773.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:14.330Z,1509683774.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:14.728Z,1509683774.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:15.135Z,1509683775.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:15.546Z,1509683775.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:15.943Z,1509683775.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:16.363Z,1509683776.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:16.774Z,1509683776.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:17.143Z,1509683777.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:17.568Z,1509683777.568 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:36:17.568Z,1509683777.568 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:36:17.568Z,1509683777.568 [BPC1](ERROR): Data Fault
2017-11-03T04:36:17.605Z,1509683777.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:17.689Z,1509683777.689 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:36:17.930Z,1509683777.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:21.257Z,1509683781.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:21.413Z,1509683781.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:21.509Z,1509683781.509 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:36:21.509Z,1509683781.509 [BPC1] No Fault, FailCount= 1
2017-11-03T04:36:21.863Z,1509683781.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:22.213Z,1509683782.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:22.638Z,1509683782.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:23.007Z,1509683783.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:23.407Z,1509683783.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:23.835Z,1509683783.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:24.235Z,1509683784.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:24.635Z,1509683784.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:25.008Z,1509683785.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:25.406Z,1509683785.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:25.804Z,1509683785.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:26.208Z,1509683786.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:26.607Z,1509683786.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:27.009Z,1509683787.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:27.434Z,1509683787.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:27.833Z,1509683787.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:28.211Z,1509683788.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:28.606Z,1509683788.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:29.006Z,1509683789.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:29.406Z,1509683789.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:29.834Z,1509683789.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:30.235Z,1509683790.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:30.634Z,1509683790.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:31.007Z,1509683791.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:31.406Z,1509683791.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:31.807Z,1509683791.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:32.207Z,1509683792.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:32.606Z,1509683792.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:33.013Z,1509683793.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:33.434Z,1509683793.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:33.833Z,1509683793.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:34.207Z,1509683794.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:34.662Z,1509683794.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:35.006Z,1509683795.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:35.443Z,1509683795.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:35.813Z,1509683795.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:36.251Z,1509683796.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:36.612Z,1509683796.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:37.043Z,1509683797.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:37.405Z,1509683797.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:37.806Z,1509683797.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:38.207Z,1509683798.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:38.605Z,1509683798.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:39.012Z,1509683799.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:39.420Z,1509683799.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:39.808Z,1509683799.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:40.206Z,1509683800.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:40.611Z,1509683800.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:41.006Z,1509683801.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:41.407Z,1509683801.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:41.837Z,1509683801.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:42.207Z,1509683802.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:42.612Z,1509683802.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:43.011Z,1509683803.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:43.406Z,1509683803.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:43.807Z,1509683803.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:44.208Z,1509683804.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:44.607Z,1509683804.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:45.013Z,1509683805.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:45.412Z,1509683805.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:45.812Z,1509683805.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:46.207Z,1509683806.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:46.607Z,1509683806.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:47.008Z,1509683807.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:47.407Z,1509683807.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:47.839Z,1509683807.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:48.235Z,1509683808.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:48.613Z,1509683808.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:49.050Z,1509683809.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:49.451Z,1509683809.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:49.812Z,1509683809.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:50.250Z,1509683810.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:50.609Z,1509683810.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:51.051Z,1509683811.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:51.451Z,1509683811.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:51.822Z,1509683811.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:52.215Z,1509683812.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:52.607Z,1509683812.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:53.010Z,1509683813.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:53.411Z,1509683813.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:53.820Z,1509683813.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:54.219Z,1509683814.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:54.619Z,1509683814.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:55.014Z,1509683815.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:55.409Z,1509683815.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:55.815Z,1509683815.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:56.208Z,1509683816.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:56.607Z,1509683816.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:57.019Z,1509683817.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:57.419Z,1509683817.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:57.819Z,1509683817.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:58.215Z,1509683818.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:58.607Z,1509683818.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:59.010Z,1509683819.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:59.409Z,1509683819.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:36:59.819Z,1509683819.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:00.226Z,1509683820.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:00.627Z,1509683820.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:01.009Z,1509683821.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:01.409Z,1509683821.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:01.810Z,1509683821.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:02.212Z,1509683822.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:02.610Z,1509683822.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:03.024Z,1509683823.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:03.475Z,1509683823.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:03.826Z,1509683823.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:04.238Z,1509683824.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:04.618Z,1509683824.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:05.027Z,1509683825.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:05.439Z,1509683825.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:05.821Z,1509683825.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:06.226Z,1509683826.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:06.621Z,1509683826.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:07.015Z,1509683827.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:07.424Z,1509683827.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:07.821Z,1509683827.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:08.220Z,1509683828.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:08.599Z,1509683828.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:09.027Z,1509683829.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:09.425Z,1509683829.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:09.826Z,1509683829.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:10.219Z,1509683830.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:10.599Z,1509683830.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:10.999Z,1509683830.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:11.399Z,1509683831.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:11.822Z,1509683831.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:12.225Z,1509683832.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:12.623Z,1509683832.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:12.999Z,1509683832.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:13.426Z,1509683833.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:13.799Z,1509683833.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:14.200Z,1509683834.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:14.599Z,1509683834.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:15.023Z,1509683835.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:15.423Z,1509683835.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:15.823Z,1509683835.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:16.199Z,1509683836.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:16.627Z,1509683836.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:17.022Z,1509683837.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:17.442Z,1509683837.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:17.851Z,1509683837.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:18.227Z,1509683838.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:21.331Z,1509683841.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:21.331Z,1509683841.331 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2017-11-03T04:37:21.331Z,1509683841.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:37:21.333Z,1509683841.333 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:21.333Z,1509683841.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2017-11-03T04:37:21.333Z,1509683841.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:37:21.335Z,1509683841.335 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:21.335Z,1509683841.335 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2017-11-03T04:37:21.335Z,1509683841.335 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:37:21.425Z,1509683841.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:37:21.425Z,1509683841.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:37:21.425Z,1509683841.425 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:37:21.572Z,1509683841.572 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:37:21.573Z,1509683841.573 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2017-11-03T04:37:21.573Z,1509683841.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:37:21.573Z,1509683841.573 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2017-11-03T04:37:21.574Z,1509683841.574 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:37:21.574Z,1509683841.574 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2017-11-03T04:37:21.925Z,1509683841.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:37:21.925Z,1509683841.925 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:37:21.926Z,1509683841.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:37:21.926Z,1509683841.926 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:37:21.927Z,1509683841.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:37:21.927Z,1509683841.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:37:21.927Z,1509683841.927 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:37:21.928Z,1509683841.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:37:21.928Z,1509683841.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:37:22.320Z,1509683842.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-03T04:37:22.321Z,1509683842.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:22.696Z,1509683842.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-03T04:37:22.697Z,1509683842.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:23.095Z,1509683843.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T04:37:23.096Z,1509683843.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:23.502Z,1509683843.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-03T04:37:23.503Z,1509683843.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:23.885Z,1509683843.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-03T04:37:23.886Z,1509683843.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:24.284Z,1509683844.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-03T04:37:24.285Z,1509683844.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:24.696Z,1509683844.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T04:37:24.697Z,1509683844.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:25.095Z,1509683845.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T04:37:25.096Z,1509683845.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:25.495Z,1509683845.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T04:37:25.496Z,1509683845.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:25.890Z,1509683845.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T04:37:25.891Z,1509683845.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:26.283Z,1509683846.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T04:37:26.285Z,1509683846.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:26.695Z,1509683846.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T04:37:26.696Z,1509683846.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:27.099Z,1509683847.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T04:37:27.100Z,1509683847.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:27.495Z,1509683847.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T04:37:27.496Z,1509683847.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:27.884Z,1509683847.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T04:37:27.885Z,1509683847.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:28.285Z,1509683848.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T04:37:28.286Z,1509683848.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:28.696Z,1509683848.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T04:37:28.697Z,1509683848.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:29.095Z,1509683849.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T04:37:29.096Z,1509683849.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:29.496Z,1509683849.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T04:37:29.497Z,1509683849.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:29.890Z,1509683849.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T04:37:29.891Z,1509683849.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:30.286Z,1509683850.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T04:37:30.287Z,1509683850.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:30.696Z,1509683850.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T04:37:30.697Z,1509683850.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:31.095Z,1509683851.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-03T04:37:31.096Z,1509683851.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:31.496Z,1509683851.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-03T04:37:31.497Z,1509683851.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:31.887Z,1509683851.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-03T04:37:31.889Z,1509683851.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:32.284Z,1509683852.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-03T04:37:32.285Z,1509683852.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:32.696Z,1509683852.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T04:37:32.697Z,1509683852.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:33.098Z,1509683853.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T04:37:33.099Z,1509683853.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:33.496Z,1509683853.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T04:37:33.497Z,1509683853.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:33.886Z,1509683853.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T04:37:33.887Z,1509683853.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:34.346Z,1509683854.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T04:37:34.346Z,1509683854.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:34.696Z,1509683854.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T04:37:34.697Z,1509683854.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:35.133Z,1509683855.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T04:37:35.134Z,1509683855.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:35.507Z,1509683855.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T04:37:35.508Z,1509683855.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:35.910Z,1509683855.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T04:37:35.911Z,1509683855.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:36.303Z,1509683856.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T04:37:36.304Z,1509683856.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:36.699Z,1509683856.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T04:37:36.700Z,1509683856.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:37.095Z,1509683857.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T04:37:37.096Z,1509683857.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:37.502Z,1509683857.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T04:37:37.503Z,1509683857.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:37.893Z,1509683857.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T04:37:37.894Z,1509683857.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:38.275Z,1509683858.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T04:37:38.276Z,1509683858.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:38.703Z,1509683858.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T04:37:38.703Z,1509683858.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:39.100Z,1509683859.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T04:37:39.101Z,1509683859.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:39.498Z,1509683859.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T04:37:39.499Z,1509683859.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:39.876Z,1509683859.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T04:37:39.877Z,1509683859.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:40.275Z,1509683860.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T04:37:40.276Z,1509683860.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:40.697Z,1509683860.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T04:37:40.698Z,1509683860.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:41.118Z,1509683861.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T04:37:41.119Z,1509683861.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:41.508Z,1509683861.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:41.879Z,1509683861.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:42.278Z,1509683862.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:42.709Z,1509683862.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:43.108Z,1509683863.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:43.509Z,1509683863.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:43.887Z,1509683863.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:44.282Z,1509683864.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:44.688Z,1509683864.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:45.088Z,1509683865.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:45.484Z,1509683865.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:45.883Z,1509683865.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:46.287Z,1509683866.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:46.708Z,1509683866.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:47.109Z,1509683867.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:47.490Z,1509683867.490 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T04:37:47.490Z,1509683867.490 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:37:47.490Z,1509683867.490 [BPC1](ERROR): Data Fault
2017-11-03T04:37:47.518Z,1509683867.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:47.617Z,1509683867.617 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:37:47.887Z,1509683867.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:48.282Z,1509683868.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:48.685Z,1509683868.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:48.765Z,1509683868.765 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:37:48.765Z,1509683868.765 [BPC1] No Fault, FailCount= 1
2017-11-03T04:37:49.143Z,1509683869.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:49.488Z,1509683869.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:49.919Z,1509683869.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:50.283Z,1509683870.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:50.694Z,1509683870.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:51.113Z,1509683871.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:51.513Z,1509683871.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:51.883Z,1509683871.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:52.287Z,1509683872.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:52.689Z,1509683872.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:53.113Z,1509683873.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:53.484Z,1509683873.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:53.883Z,1509683873.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:54.282Z,1509683874.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:54.712Z,1509683874.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:55.088Z,1509683875.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:55.494Z,1509683875.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:55.883Z,1509683875.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:56.281Z,1509683876.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:56.694Z,1509683876.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:57.112Z,1509683877.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:57.496Z,1509683877.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:57.884Z,1509683877.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:58.283Z,1509683878.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:58.688Z,1509683878.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:59.096Z,1509683879.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:59.513Z,1509683879.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:37:59.883Z,1509683879.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:00.283Z,1509683880.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:00.715Z,1509683880.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:01.088Z,1509683881.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:01.534Z,1509683881.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:01.930Z,1509683881.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:02.282Z,1509683882.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:02.735Z,1509683882.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:03.096Z,1509683883.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:03.519Z,1509683883.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:03.919Z,1509683883.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:04.287Z,1509683884.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:04.688Z,1509683884.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:05.113Z,1509683885.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:05.496Z,1509683885.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:05.883Z,1509683885.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:06.283Z,1509683886.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:06.712Z,1509683886.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:07.088Z,1509683887.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:07.496Z,1509683887.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:07.883Z,1509683887.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:08.282Z,1509683888.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:08.696Z,1509683888.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:09.096Z,1509683889.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:09.487Z,1509683889.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:09.884Z,1509683889.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:10.283Z,1509683890.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:10.688Z,1509683890.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:11.112Z,1509683891.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:11.489Z,1509683891.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:11.884Z,1509683891.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:12.291Z,1509683892.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:12.689Z,1509683892.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:13.096Z,1509683893.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:13.496Z,1509683893.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:13.940Z,1509683893.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:14.285Z,1509683894.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:14.713Z,1509683894.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:15.111Z,1509683895.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:15.489Z,1509683895.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:15.962Z,1509683895.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:16.286Z,1509683896.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:16.690Z,1509683896.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:17.126Z,1509683897.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:17.493Z,1509683897.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:17.926Z,1509683897.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:18.316Z,1509683898.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:21.391Z,1509683901.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:21.395Z,1509683901.395 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T04:33:20.8Z
2017-11-03T04:38:21.395Z,1509683901.395 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T04:38:21.395Z,1509683901.395 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T04:38:21.591Z,1509683901.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:22.082Z,1509683902.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:22.368Z,1509683902.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:22.764Z,1509683902.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:23.159Z,1509683903.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:26.246Z,1509683906.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:26.373Z,1509683906.373 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0104.lzma
2017-11-03T04:38:26.464Z,1509683906.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:26.840Z,1509683906.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:27.167Z,1509683907.167 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0104.lzma.bak
2017-11-03T04:38:27.167Z,1509683907.167 [DataOverHttps](INFO): SBD MOMSN=5182717
2017-11-03T04:38:27.246Z,1509683907.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:27.830Z,1509683907.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:28.030Z,1509683908.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:31.200Z,1509683911.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:31.353Z,1509683911.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:31.772Z,1509683911.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:32.187Z,1509683912.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:32.547Z,1509683912.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:32.979Z,1509683912.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:36.187Z,1509683916.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:36.289Z,1509683916.289 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20171103T001125/Express0105.lzma
2017-11-03T04:38:36.375Z,1509683916.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:36.747Z,1509683916.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:37.087Z,1509683917.087 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0105.lzma.bak
2017-11-03T04:38:37.087Z,1509683917.087 [DataOverHttps](INFO): SBD MOMSN=5182719
2017-11-03T04:38:37.171Z,1509683917.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:37.739Z,1509683917.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:37.742Z,1509683917.742 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T04:38:37.742Z,1509683917.742 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T04:38:37.742Z,1509683917.742 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T04:38:37.955Z,1509683917.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:41.046Z,1509683921.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:41.268Z,1509683921.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:41.636Z,1509683921.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:42.047Z,1509683922.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:42.429Z,1509683922.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:42.828Z,1509683922.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:43.229Z,1509683923.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:43.628Z,1509683923.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:44.037Z,1509683924.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:44.442Z,1509683924.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:44.840Z,1509683924.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:45.231Z,1509683925.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:45.325Z,1509683925.325 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:38:45.325Z,1509683925.325 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T04:38:45.333Z,1509683925.333 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:38:45.333Z,1509683925.333 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:38:45.333Z,1509683925.333 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:38:45.333Z,1509683925.333 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:38:45.630Z,1509683925.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:46.027Z,1509683926.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:46.428Z,1509683926.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:46.838Z,1509683926.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:47.240Z,1509683927.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:47.636Z,1509683927.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:48.028Z,1509683928.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:48.487Z,1509683928.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:48.834Z,1509683928.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:49.279Z,1509683929.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:49.459Z,1509683929.459 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:38:49.523Z,1509683929.523 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:38:49.524Z,1509683929.524 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:38:49.525Z,1509683929.525 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:38:49.525Z,1509683929.525 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:38:49.657Z,1509683929.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:50.105Z,1509683930.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:50.508Z,1509683930.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:50.882Z,1509683930.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:51.219Z,1509683931.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:51.626Z,1509683931.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:52.021Z,1509683932.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:52.427Z,1509683932.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:52.833Z,1509683932.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:53.235Z,1509683933.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:53.635Z,1509683933.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:54.026Z,1509683934.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:54.426Z,1509683934.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:54.825Z,1509683934.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:55.219Z,1509683935.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:55.634Z,1509683935.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:56.057Z,1509683936.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:56.441Z,1509683936.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:56.838Z,1509683936.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:57.242Z,1509683937.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:57.615Z,1509683937.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:58.019Z,1509683938.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:58.423Z,1509683938.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:58.847Z,1509683938.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:59.244Z,1509683939.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:38:59.649Z,1509683939.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:00.019Z,1509683940.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:00.423Z,1509683940.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:00.822Z,1509683940.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:01.251Z,1509683941.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:01.631Z,1509683941.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:02.032Z,1509683942.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:02.478Z,1509683942.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:02.870Z,1509683942.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:03.256Z,1509683943.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:03.659Z,1509683943.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:04.025Z,1509683944.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:04.454Z,1509683944.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:04.867Z,1509683944.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:05.229Z,1509683945.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:05.624Z,1509683945.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:06.025Z,1509683946.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:06.424Z,1509683946.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:06.824Z,1509683946.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:07.224Z,1509683947.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:07.622Z,1509683947.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:08.029Z,1509683948.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:08.451Z,1509683948.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:08.850Z,1509683948.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:09.231Z,1509683949.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:09.625Z,1509683949.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:10.027Z,1509683950.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:10.423Z,1509683950.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:10.836Z,1509683950.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:11.236Z,1509683951.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:11.636Z,1509683951.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:12.031Z,1509683952.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:12.427Z,1509683952.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:12.828Z,1509683952.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:13.236Z,1509683953.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:13.635Z,1509683953.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:14.036Z,1509683954.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:14.446Z,1509683954.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:14.835Z,1509683954.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:15.228Z,1509683955.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:15.629Z,1509683955.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:16.027Z,1509683956.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:16.455Z,1509683956.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:16.838Z,1509683956.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:17.256Z,1509683957.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:17.639Z,1509683957.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:18.034Z,1509683958.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:18.409Z,1509683958.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:18.832Z,1509683958.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:19.239Z,1509683959.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:19.631Z,1509683959.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:20.033Z,1509683960.033 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:39:20.033Z,1509683960.033 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:39:20.033Z,1509683960.033 [BPC1](ERROR): Communications Fault
2017-11-03T04:39:20.041Z,1509683960.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:20.137Z,1509683960.137 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:39:20.447Z,1509683960.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:20.841Z,1509683960.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:21.231Z,1509683961.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:21.322Z,1509683961.322 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:39:21.322Z,1509683961.322 [BPC1] No Fault, FailCount= 1
2017-11-03T04:39:21.683Z,1509683961.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:22.033Z,1509683962.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:22.439Z,1509683962.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:22.847Z,1509683962.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:23.228Z,1509683963.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:23.628Z,1509683963.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:24.027Z,1509683964.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:24.427Z,1509683964.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:24.826Z,1509683964.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:25.230Z,1509683965.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:25.632Z,1509683965.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:26.036Z,1509683966.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:26.478Z,1509683966.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:26.843Z,1509683966.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:27.237Z,1509683967.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:27.630Z,1509683967.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:28.032Z,1509683968.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:28.433Z,1509683968.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:28.842Z,1509683968.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:29.238Z,1509683969.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:29.639Z,1509683969.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:30.026Z,1509683970.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:30.415Z,1509683970.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:30.814Z,1509683970.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:31.238Z,1509683971.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:31.678Z,1509683971.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:32.047Z,1509683972.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:32.440Z,1509683972.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:32.836Z,1509683972.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:33.231Z,1509683973.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:33.635Z,1509683973.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:34.027Z,1509683974.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:34.429Z,1509683974.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:34.837Z,1509683974.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:35.239Z,1509683975.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:35.636Z,1509683975.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:36.029Z,1509683976.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:36.427Z,1509683976.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:36.829Z,1509683976.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:37.267Z,1509683977.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:37.615Z,1509683977.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:38.037Z,1509683978.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:38.491Z,1509683978.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:41.743Z,1509683981.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:41.943Z,1509683981.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:42.342Z,1509683982.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:42.705Z,1509683982.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:43.104Z,1509683983.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:43.504Z,1509683983.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:43.909Z,1509683983.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:44.309Z,1509683984.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:44.714Z,1509683984.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:45.105Z,1509683985.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:45.517Z,1509683985.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:45.892Z,1509683985.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:46.287Z,1509683986.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:46.712Z,1509683986.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:47.115Z,1509683987.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:47.538Z,1509683987.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:47.891Z,1509683987.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:48.294Z,1509683988.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:48.717Z,1509683988.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:49.114Z,1509683989.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:49.559Z,1509683989.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:49.918Z,1509683989.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:50.295Z,1509683990.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:50.690Z,1509683990.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:51.091Z,1509683991.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:51.516Z,1509683991.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:51.914Z,1509683991.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:52.314Z,1509683992.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:52.713Z,1509683992.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:53.143Z,1509683993.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:53.486Z,1509683993.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:53.916Z,1509683993.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:54.327Z,1509683994.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:54.697Z,1509683994.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:55.127Z,1509683995.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:55.539Z,1509683995.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:55.891Z,1509683995.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:56.323Z,1509683996.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:56.747Z,1509683996.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:57.123Z,1509683997.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:57.519Z,1509683997.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:57.891Z,1509683997.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:58.291Z,1509683998.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:58.719Z,1509683998.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:59.117Z,1509683999.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:59.496Z,1509683999.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:39:59.899Z,1509683999.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:00.332Z,1509684000.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:00.708Z,1509684000.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:01.100Z,1509684001.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:01.536Z,1509684001.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:01.895Z,1509684001.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:02.294Z,1509684002.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:02.724Z,1509684002.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:03.104Z,1509684003.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:03.535Z,1509684003.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:03.897Z,1509684003.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:04.294Z,1509684004.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:04.703Z,1509684004.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:05.105Z,1509684005.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:05.497Z,1509684005.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:05.901Z,1509684005.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:06.326Z,1509684006.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:06.707Z,1509684006.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:07.095Z,1509684007.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:07.538Z,1509684007.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:07.903Z,1509684007.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:08.297Z,1509684008.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:08.750Z,1509684008.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:09.103Z,1509684009.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:09.503Z,1509684009.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:09.901Z,1509684009.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:10.335Z,1509684010.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:10.710Z,1509684010.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:11.146Z,1509684011.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:11.546Z,1509684011.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:11.897Z,1509684011.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:12.299Z,1509684012.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:12.707Z,1509684012.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:13.111Z,1509684013.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:13.508Z,1509684013.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:13.900Z,1509684013.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:14.307Z,1509684014.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:14.709Z,1509684014.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:15.105Z,1509684015.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:15.554Z,1509684015.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:15.907Z,1509684015.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:16.306Z,1509684016.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:16.707Z,1509684016.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:17.083Z,1509684017.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:17.534Z,1509684017.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:17.913Z,1509684017.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:18.312Z,1509684018.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:18.713Z,1509684018.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:19.091Z,1509684019.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:19.490Z,1509684019.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:19.887Z,1509684019.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:20.287Z,1509684020.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:20.722Z,1509684020.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:21.127Z,1509684021.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:21.516Z,1509684021.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:21.933Z,1509684021.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:21.933Z,1509684021.933 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2017-11-03T04:40:21.933Z,1509684021.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:40:21.935Z,1509684021.935 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:21.935Z,1509684021.935 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2017-11-03T04:40:21.935Z,1509684021.935 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:40:21.937Z,1509684021.937 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:21.937Z,1509684021.937 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2017-11-03T04:40:21.937Z,1509684021.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:40:22.044Z,1509684022.044 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:40:22.045Z,1509684022.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:40:22.045Z,1509684022.045 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:40:22.373Z,1509684022.373 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:40:22.373Z,1509684022.373 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2017-11-03T04:40:22.374Z,1509684022.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:40:22.374Z,1509684022.374 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2017-11-03T04:40:22.374Z,1509684022.374 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:40:22.374Z,1509684022.374 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2017-11-03T04:40:22.711Z,1509684022.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:40:22.712Z,1509684022.712 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:40:22.712Z,1509684022.712 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:40:22.713Z,1509684022.713 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:40:22.713Z,1509684022.713 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:40:22.713Z,1509684022.713 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:40:22.714Z,1509684022.714 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:40:22.714Z,1509684022.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:40:22.715Z,1509684022.715 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:40:23.130Z,1509684023.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:23.551Z,1509684023.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:23.897Z,1509684023.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:24.322Z,1509684024.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:24.721Z,1509684024.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:25.139Z,1509684025.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:25.522Z,1509684025.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:25.927Z,1509684025.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:26.295Z,1509684026.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:26.723Z,1509684026.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:27.120Z,1509684027.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:27.500Z,1509684027.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:27.897Z,1509684027.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:28.299Z,1509684028.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:28.700Z,1509684028.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:29.103Z,1509684029.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:29.553Z,1509684029.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:29.899Z,1509684029.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:30.302Z,1509684030.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:30.696Z,1509684030.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:31.099Z,1509684031.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:31.543Z,1509684031.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:31.901Z,1509684031.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:32.304Z,1509684032.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:32.705Z,1509684032.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:33.103Z,1509684033.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:33.495Z,1509684033.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:33.897Z,1509684033.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:34.295Z,1509684034.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:34.701Z,1509684034.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:35.101Z,1509684035.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:35.500Z,1509684035.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:35.896Z,1509684035.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:36.297Z,1509684036.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:36.746Z,1509684036.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:37.130Z,1509684037.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:37.500Z,1509684037.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:37.945Z,1509684037.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:38.295Z,1509684038.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:38.703Z,1509684038.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:41.935Z,1509684041.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:42.123Z,1509684042.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:42.534Z,1509684042.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:42.884Z,1509684042.884 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-03T04:40:42.938Z,1509684042.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:43.291Z,1509684043.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:43.725Z,1509684043.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:44.101Z,1509684044.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:44.500Z,1509684044.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:44.891Z,1509684044.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:45.304Z,1509684045.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:45.484Z,1509684045.484 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:40:45.485Z,1509684045.485 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T04:40:45.485Z,1509684045.485 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:40:45.702Z,1509684045.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:40:45.703Z,1509684045.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:45.797Z,1509684045.797 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:40:45.888Z,1509684045.888 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:40:45.976Z,1509684045.976 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:40:46.107Z,1509684046.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:40:46.108Z,1509684046.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:46.498Z,1509684046.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:40:46.499Z,1509684046.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:46.914Z,1509684046.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:40:46.915Z,1509684046.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:47.292Z,1509684047.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:40:47.293Z,1509684047.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:47.372Z,1509684047.372 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:40:47.373Z,1509684047.373 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T04:40:47.592Z,1509684047.592 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:40:47.593Z,1509684047.593 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:40:47.593Z,1509684047.593 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:40:47.593Z,1509684047.593 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:40:47.699Z,1509684047.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:40:47.700Z,1509684047.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:48.099Z,1509684048.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:40:48.100Z,1509684048.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:48.510Z,1509684048.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:40:48.511Z,1509684048.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:48.889Z,1509684048.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:40:48.890Z,1509684048.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:49.287Z,1509684049.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:40:49.289Z,1509684049.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:49.706Z,1509684049.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:40:49.707Z,1509684049.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:50.114Z,1509684050.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:40:50.115Z,1509684050.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:50.499Z,1509684050.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:40:50.500Z,1509684050.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:50.892Z,1509684050.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:40:50.893Z,1509684050.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:51.289Z,1509684051.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:40:51.290Z,1509684051.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:51.747Z,1509684051.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:40:51.748Z,1509684051.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:51.828Z,1509684051.828 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:40:51.915Z,1509684051.915 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:40:51.916Z,1509684051.916 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:40:51.921Z,1509684051.921 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:40:51.921Z,1509684051.921 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:40:52.109Z,1509684052.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:40:52.110Z,1509684052.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:52.505Z,1509684052.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:52.899Z,1509684052.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:53.307Z,1509684053.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:53.749Z,1509684053.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:54.103Z,1509684054.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:54.503Z,1509684054.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:54.888Z,1509684054.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:55.339Z,1509684055.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:55.703Z,1509684055.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:56.134Z,1509684056.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:56.515Z,1509684056.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:56.919Z,1509684056.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:57.331Z,1509684057.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:57.698Z,1509684057.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:58.115Z,1509684058.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:58.522Z,1509684058.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:58.917Z,1509684058.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:59.296Z,1509684059.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:40:59.714Z,1509684059.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:00.102Z,1509684060.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:00.558Z,1509684060.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:00.907Z,1509684060.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:01.309Z,1509684061.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:01.695Z,1509684061.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:02.119Z,1509684062.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:02.522Z,1509684062.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:02.927Z,1509684062.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:03.329Z,1509684063.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:03.720Z,1509684063.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:04.098Z,1509684064.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:04.573Z,1509684064.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:04.892Z,1509684064.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:05.339Z,1509684065.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:05.731Z,1509684065.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:06.142Z,1509684066.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:06.527Z,1509684066.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:06.906Z,1509684066.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:07.335Z,1509684067.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:07.787Z,1509684067.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:08.146Z,1509684068.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:08.531Z,1509684068.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:08.911Z,1509684068.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:09.305Z,1509684069.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:09.775Z,1509684069.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:10.141Z,1509684070.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:10.543Z,1509684070.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:10.909Z,1509684070.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:11.375Z,1509684071.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:11.743Z,1509684071.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:12.107Z,1509684072.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:12.519Z,1509684072.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:12.886Z,1509684072.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:13.286Z,1509684073.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:13.709Z,1509684073.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:14.115Z,1509684074.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:14.538Z,1509684074.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:14.910Z,1509684074.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:15.276Z,1509684075.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x33351 got:0x48314
2017-11-03T04:41:15.314Z,1509684075.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:15.714Z,1509684075.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:16.105Z,1509684076.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:16.553Z,1509684076.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:16.930Z,1509684076.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:17.314Z,1509684077.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:17.710Z,1509684077.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:18.108Z,1509684078.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:18.510Z,1509684078.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:18.914Z,1509684078.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:19.287Z,1509684079.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:19.710Z,1509684079.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:20.107Z,1509684080.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:20.514Z,1509684080.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:20.890Z,1509684080.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:21.288Z,1509684081.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:21.709Z,1509684081.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:22.114Z,1509684082.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:22.535Z,1509684082.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:22.910Z,1509684082.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:23.276Z,1509684083.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x11160 got:0x48317
2017-11-03T04:41:23.323Z,1509684083.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:23.711Z,1509684083.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:24.138Z,1509684084.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:24.542Z,1509684084.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:24.891Z,1509684084.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:25.289Z,1509684085.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:25.705Z,1509684085.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:26.099Z,1509684086.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:26.499Z,1509684086.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:26.930Z,1509684086.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:27.306Z,1509684087.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:27.745Z,1509684087.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:28.103Z,1509684088.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:28.595Z,1509684088.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:28.907Z,1509684088.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:29.280Z,1509684089.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:29.683Z,1509684089.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:30.106Z,1509684090.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:30.551Z,1509684090.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:30.901Z,1509684090.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:31.301Z,1509684091.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:31.710Z,1509684091.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:32.105Z,1509684092.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:32.483Z,1509684092.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:32.883Z,1509684092.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:33.307Z,1509684093.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:33.704Z,1509684093.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:34.107Z,1509684094.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:34.505Z,1509684094.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:34.931Z,1509684094.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:35.318Z,1509684095.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:35.705Z,1509684095.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:36.107Z,1509684096.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:36.513Z,1509684096.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:36.911Z,1509684096.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:37.283Z,1509684097.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:37.719Z,1509684097.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:38.154Z,1509684098.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:38.514Z,1509684098.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:38.910Z,1509684098.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:42.062Z,1509684102.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x8691 got:0x45580
2017-11-03T04:41:42.062Z,1509684102.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x4675 got:0x45586
2017-11-03T04:41:42.063Z,1509684102.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x53853 got:0x45582
2017-11-03T04:41:42.063Z,1509684102.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x60420 got:0x45579
2017-11-03T04:41:42.063Z,1509684102.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x20574 got:0x45579
2017-11-03T04:41:42.064Z,1509684102.064 [PNI_TCM](ERROR): CRC does not match. Expected:0x53072 got:0x45578
2017-11-03T04:41:42.064Z,1509684102.064 [PNI_TCM](ERROR): CRC does not match. Expected:0x42769 got:0x45580
2017-11-03T04:41:42.111Z,1509684102.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:42.273Z,1509684102.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:42.669Z,1509684102.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:43.072Z,1509684103.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:43.461Z,1509684103.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:43.862Z,1509684103.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:44.264Z,1509684104.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:44.675Z,1509684104.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:45.070Z,1509684105.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:45.472Z,1509684105.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:45.553Z,1509684105.553 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T04:41:45.927Z,1509684105.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:46.247Z,1509684106.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:46.669Z,1509684106.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:47.066Z,1509684107.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:47.469Z,1509684107.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:47.818Z,1509684107.818 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T04:41:47.818Z,1509684107.818 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T04:41:47.818Z,1509684107.818 [DropWeight](ERROR): Hardware Fault
2017-11-03T04:41:47.939Z,1509684107.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:48.060Z,1509684108.060 [CBIT](INFO): Critical error at 20171103T044147
2017-11-03T04:41:48.062Z,1509684108.062 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T04:41:48.062Z,1509684108.062 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T04:41:48.283Z,1509684108.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:48.375Z,1509684108.375 [CBIT](INFO): Critical error at 20171103T044148
2017-11-03T04:41:48.735Z,1509684108.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:49.059Z,1509684109.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:49.483Z,1509684109.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:49.854Z,1509684109.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:50.290Z,1509684110.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:50.691Z,1509684110.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:51.060Z,1509684111.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:51.461Z,1509684111.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:51.859Z,1509684111.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:52.259Z,1509684112.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:52.657Z,1509684112.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:53.060Z,1509684113.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:53.463Z,1509684113.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:53.860Z,1509684113.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:54.263Z,1509684114.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:54.657Z,1509684114.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:55.057Z,1509684115.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:55.454Z,1509684115.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:55.861Z,1509684115.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:56.264Z,1509684116.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:56.663Z,1509684116.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:57.056Z,1509684117.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:57.458Z,1509684117.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:57.855Z,1509684117.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:58.262Z,1509684118.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:58.664Z,1509684118.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:59.061Z,1509684119.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:59.464Z,1509684119.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:41:59.861Z,1509684119.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:00.256Z,1509684120.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:00.656Z,1509684120.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:01.061Z,1509684121.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:01.456Z,1509684121.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:01.951Z,1509684121.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:02.315Z,1509684122.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:02.675Z,1509684122.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:03.066Z,1509684123.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:03.471Z,1509684123.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:03.864Z,1509684123.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:04.287Z,1509684124.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:04.691Z,1509684124.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:05.063Z,1509684125.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:05.460Z,1509684125.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:05.857Z,1509684125.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:06.255Z,1509684126.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:06.656Z,1509684126.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:07.059Z,1509684127.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:07.459Z,1509684127.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:07.856Z,1509684127.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:08.260Z,1509684128.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:08.660Z,1509684128.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:09.054Z,1509684129.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:09.454Z,1509684129.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:09.853Z,1509684129.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:10.257Z,1509684130.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:10.653Z,1509684130.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:11.060Z,1509684131.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:11.457Z,1509684131.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:11.860Z,1509684131.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:12.255Z,1509684132.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:12.654Z,1509684132.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:13.056Z,1509684133.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:13.459Z,1509684133.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:13.951Z,1509684133.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:14.281Z,1509684134.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:14.661Z,1509684134.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:15.057Z,1509684135.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:15.502Z,1509684135.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:15.974Z,1509684135.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:16.258Z,1509684136.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:16.717Z,1509684136.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:17.068Z,1509684137.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:17.502Z,1509684137.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:17.859Z,1509684137.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:18.290Z,1509684138.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:18.676Z,1509684138.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:19.091Z,1509684139.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:19.475Z,1509684139.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:19.850Z,1509684139.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:20.254Z,1509684140.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:20.646Z,1509684140.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:21.075Z,1509684141.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:21.475Z,1509684141.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:21.875Z,1509684141.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:22.275Z,1509684142.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:22.655Z,1509684142.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:23.055Z,1509684143.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:23.475Z,1509684143.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:23.873Z,1509684143.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:24.273Z,1509684144.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:24.683Z,1509684144.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:25.050Z,1509684145.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:25.476Z,1509684145.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:25.851Z,1509684145.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:26.255Z,1509684146.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:26.683Z,1509684146.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:27.077Z,1509684147.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:27.472Z,1509684147.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:27.851Z,1509684147.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:28.262Z,1509684148.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:28.671Z,1509684148.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:29.067Z,1509684149.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:29.467Z,1509684149.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:29.858Z,1509684149.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:30.282Z,1509684150.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:30.669Z,1509684150.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:31.122Z,1509684151.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:31.468Z,1509684151.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:31.928Z,1509684151.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:32.263Z,1509684152.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:32.706Z,1509684152.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:33.154Z,1509684153.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:33.467Z,1509684153.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:33.859Z,1509684153.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:34.257Z,1509684154.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:34.663Z,1509684154.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:35.069Z,1509684155.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:35.472Z,1509684155.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:35.868Z,1509684155.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:36.259Z,1509684156.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:36.657Z,1509684156.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:37.059Z,1509684157.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:37.463Z,1509684157.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:37.869Z,1509684157.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:38.272Z,1509684158.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:38.671Z,1509684158.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:39.058Z,1509684159.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:42.359Z,1509684162.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:42.518Z,1509684162.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:42.928Z,1509684162.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:43.331Z,1509684163.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:43.727Z,1509684163.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:44.169Z,1509684164.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:44.515Z,1509684164.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:44.919Z,1509684164.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:45.319Z,1509684165.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:45.761Z,1509684165.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:46.135Z,1509684166.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:46.563Z,1509684166.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:46.934Z,1509684166.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:47.298Z,1509684167.298 [PNI_TCM](ERROR): CRC does not match. Expected:0x38930 got:0x45341
2017-11-03T04:42:47.350Z,1509684167.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:47.738Z,1509684167.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:47.999Z,1509684167.999 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:42:47.999Z,1509684167.999 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T04:42:47.999Z,1509684167.999 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:42:48.130Z,1509684168.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:42:48.131Z,1509684168.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:48.222Z,1509684168.222 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:42:48.400Z,1509684168.400 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:42:48.544Z,1509684168.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:42:48.549Z,1509684168.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:48.585Z,1509684168.585 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:42:48.937Z,1509684168.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:42:48.938Z,1509684168.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:49.316Z,1509684169.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:42:49.333Z,1509684169.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:49.735Z,1509684169.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:42:49.736Z,1509684169.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:49.833Z,1509684169.833 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:42:49.833Z,1509684169.833 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T04:42:50.110Z,1509684170.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:42:50.111Z,1509684170.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:50.201Z,1509684170.201 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:42:50.201Z,1509684170.201 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:42:50.201Z,1509684170.201 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:42:50.201Z,1509684170.201 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:42:50.508Z,1509684170.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:42:50.509Z,1509684170.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:50.911Z,1509684170.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:42:50.912Z,1509684170.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:51.307Z,1509684171.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:42:51.308Z,1509684171.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:51.732Z,1509684171.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:42:51.733Z,1509684171.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:52.133Z,1509684172.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:42:52.134Z,1509684172.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:52.533Z,1509684172.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:42:52.534Z,1509684172.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:52.910Z,1509684172.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:42:52.911Z,1509684172.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:53.309Z,1509684173.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:42:53.310Z,1509684173.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:53.737Z,1509684173.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:42:53.738Z,1509684173.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:54.110Z,1509684174.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:42:54.111Z,1509684174.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:54.323Z,1509684174.323 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:42:54.383Z,1509684174.383 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:42:54.384Z,1509684174.384 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:42:54.385Z,1509684174.385 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:42:54.386Z,1509684174.386 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:42:54.545Z,1509684174.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:42:54.546Z,1509684174.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:54.941Z,1509684174.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:55.336Z,1509684175.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:55.736Z,1509684175.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:56.139Z,1509684176.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:56.537Z,1509684176.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:56.915Z,1509684176.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:57.312Z,1509684177.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:57.731Z,1509684177.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:58.159Z,1509684178.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:58.533Z,1509684178.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:58.912Z,1509684178.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:59.308Z,1509684179.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:42:59.712Z,1509684179.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:00.154Z,1509684180.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:00.519Z,1509684180.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:00.943Z,1509684180.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:01.442Z,1509684181.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:01.718Z,1509684181.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:02.159Z,1509684182.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:02.543Z,1509684182.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:02.915Z,1509684182.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:03.314Z,1509684183.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:03.736Z,1509684183.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:04.138Z,1509684184.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:04.515Z,1509684184.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:04.915Z,1509684184.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:05.314Z,1509684185.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:05.716Z,1509684185.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:06.115Z,1509684186.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:06.539Z,1509684186.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:06.914Z,1509684186.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:07.319Z,1509684187.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:07.720Z,1509684187.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:08.139Z,1509684188.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:08.519Z,1509684188.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:08.910Z,1509684188.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:09.314Z,1509684189.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:09.737Z,1509684189.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:10.123Z,1509684190.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:10.523Z,1509684190.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:10.912Z,1509684190.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:11.315Z,1509684191.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:11.717Z,1509684191.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:12.117Z,1509684192.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:12.519Z,1509684192.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:12.919Z,1509684192.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:13.350Z,1509684193.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:13.717Z,1509684193.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:14.192Z,1509684194.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:14.520Z,1509684194.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:14.966Z,1509684194.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:15.312Z,1509684195.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:15.743Z,1509684195.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:16.120Z,1509684196.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:16.576Z,1509684196.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:16.954Z,1509684196.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:17.314Z,1509684197.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:17.719Z,1509684197.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:18.115Z,1509684198.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:18.526Z,1509684198.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:18.924Z,1509684198.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:19.323Z,1509684199.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:19.723Z,1509684199.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:20.113Z,1509684200.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:20.523Z,1509684200.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:20.918Z,1509684200.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:21.309Z,1509684201.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:21.723Z,1509684201.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:22.121Z,1509684202.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:22.531Z,1509684202.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:22.919Z,1509684202.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:22.919Z,1509684202.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2017-11-03T04:43:22.919Z,1509684202.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:43:22.921Z,1509684202.921 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:22.921Z,1509684202.921 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2017-11-03T04:43:22.921Z,1509684202.921 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:43:22.923Z,1509684202.923 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:22.923Z,1509684202.923 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2017-11-03T04:43:22.923Z,1509684202.923 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:43:23.033Z,1509684203.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:43:23.033Z,1509684203.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:43:23.034Z,1509684203.034 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:43:23.392Z,1509684203.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:43:23.393Z,1509684203.393 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2017-11-03T04:43:23.393Z,1509684203.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:43:23.393Z,1509684203.393 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2017-11-03T04:43:23.394Z,1509684203.394 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:43:23.394Z,1509684203.394 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2017-11-03T04:43:23.729Z,1509684203.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:43:23.730Z,1509684203.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:43:23.730Z,1509684203.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:43:23.730Z,1509684203.730 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:43:23.731Z,1509684203.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:43:23.731Z,1509684203.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:43:23.731Z,1509684203.731 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:43:23.732Z,1509684203.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:43:23.732Z,1509684203.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:43:24.104Z,1509684204.104 [PNI_TCM](ERROR): CRC does not match. Expected:0x49192 got:0x32285
2017-11-03T04:43:24.134Z,1509684204.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:24.515Z,1509684204.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:24.924Z,1509684204.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:25.335Z,1509684205.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:25.726Z,1509684205.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:26.123Z,1509684206.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:26.513Z,1509684206.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:26.919Z,1509684206.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:27.317Z,1509684207.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:27.720Z,1509684207.720 [BPC1](ERROR): Failed to parse message.
2017-11-03T04:43:27.720Z,1509684207.720 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:43:27.720Z,1509684207.720 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:43:27.720Z,1509684207.720 [BPC1](ERROR): Data Fault
2017-11-03T04:43:27.729Z,1509684207.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:27.825Z,1509684207.825 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:43:28.211Z,1509684208.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:28.535Z,1509684208.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:28.923Z,1509684208.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:29.013Z,1509684209.013 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:43:29.013Z,1509684209.013 [BPC1] No Fault, FailCount= 1
2017-11-03T04:43:29.367Z,1509684209.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:29.735Z,1509684209.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:30.163Z,1509684210.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:30.542Z,1509684210.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:30.918Z,1509684210.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:31.314Z,1509684211.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:31.719Z,1509684211.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:32.117Z,1509684212.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:32.538Z,1509684212.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:32.925Z,1509684212.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:33.328Z,1509684213.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:33.727Z,1509684213.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:34.119Z,1509684214.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:34.518Z,1509684214.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:34.917Z,1509684214.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:35.314Z,1509684215.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:35.721Z,1509684215.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:36.123Z,1509684216.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:36.527Z,1509684216.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:36.919Z,1509684216.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:37.315Z,1509684217.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:37.723Z,1509684217.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:38.138Z,1509684218.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:38.141Z,1509684218.141 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T04:43:38.141Z,1509684218.141 [Default:CheckIn:C.Wait] Stopped
2017-11-03T04:43:38.141Z,1509684218.141 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T04:43:38.141Z,1509684218.141 [Default:CheckIn:D] Running Loop=1
2017-11-03T04:43:38.535Z,1509684218.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:38.538Z,1509684218.538 [Default:CheckIn:D] Stopped
2017-11-03T04:43:38.538Z,1509684218.538 [Default:CheckIn:E] Running Loop=1
2017-11-03T04:43:38.939Z,1509684218.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:38.946Z,1509684218.946 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.516195 min 
2017-11-03T04:43:38.946Z,1509684218.946 [Default:CheckIn:E] Stopped
2017-11-03T04:43:38.946Z,1509684218.946 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T04:43:38.947Z,1509684218.947 [Default:CheckIn] Stopped
2017-11-03T04:43:38.947Z,1509684218.947 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T04:43:38.947Z,1509684218.947 [Default:CheckIn](INFO): Running loop #27
2017-11-03T04:43:38.947Z,1509684218.947 [Default:CheckIn] Running Loop=27
2017-11-03T04:43:38.947Z,1509684218.947 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T04:43:38.947Z,1509684218.947 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T04:43:39.331Z,1509684219.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:42.671Z,1509684222.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:42.854Z,1509684222.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:43.243Z,1509684223.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:43.682Z,1509684223.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:44.043Z,1509684224.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:44.531Z,1509684224.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:44.831Z,1509684224.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:45.281Z,1509684225.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:45.635Z,1509684225.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:46.044Z,1509684226.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:46.513Z,1509684226.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:46.845Z,1509684226.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:47.232Z,1509684227.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:47.643Z,1509684227.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:48.041Z,1509684228.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:48.439Z,1509684228.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:48.851Z,1509684228.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:49.243Z,1509684229.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:49.651Z,1509684229.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:50.038Z,1509684230.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:50.468Z,1509684230.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:50.823Z,1509684230.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:51.243Z,1509684231.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:51.622Z,1509684231.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:52.057Z,1509684232.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:52.444Z,1509684232.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:52.843Z,1509684232.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:53.242Z,1509684233.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:53.641Z,1509684233.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:54.059Z,1509684234.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:54.424Z,1509684234.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:54.847Z,1509684234.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:55.247Z,1509684235.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:55.646Z,1509684235.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:56.041Z,1509684236.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:56.441Z,1509684236.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:56.851Z,1509684236.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:57.278Z,1509684237.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:57.632Z,1509684237.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:58.037Z,1509684238.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:58.511Z,1509684238.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:58.870Z,1509684238.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:59.274Z,1509684239.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:43:59.671Z,1509684239.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:00.034Z,1509684240.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:00.513Z,1509684240.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:00.841Z,1509684240.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:01.241Z,1509684241.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:01.637Z,1509684241.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:02.041Z,1509684242.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:02.427Z,1509684242.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:02.833Z,1509684242.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:03.230Z,1509684243.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:03.632Z,1509684243.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:04.041Z,1509684244.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:04.436Z,1509684244.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:04.837Z,1509684244.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:05.235Z,1509684245.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:05.631Z,1509684245.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:06.037Z,1509684246.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:06.439Z,1509684246.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:06.843Z,1509684246.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:07.240Z,1509684247.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:07.647Z,1509684247.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:08.050Z,1509684248.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:08.433Z,1509684248.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:08.833Z,1509684248.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:09.233Z,1509684249.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:09.642Z,1509684249.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:10.044Z,1509684250.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:10.447Z,1509684250.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:10.841Z,1509684250.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:11.234Z,1509684251.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:11.705Z,1509684251.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:12.036Z,1509684252.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:12.489Z,1509684252.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:12.888Z,1509684252.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:13.248Z,1509684253.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:13.670Z,1509684253.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:14.067Z,1509684254.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:14.507Z,1509684254.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:14.825Z,1509684254.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:15.224Z,1509684255.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:15.623Z,1509684255.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:16.048Z,1509684256.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:16.447Z,1509684256.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:16.842Z,1509684256.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:17.223Z,1509684257.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:17.623Z,1509684257.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:18.049Z,1509684258.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:18.420Z,1509684258.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:18.847Z,1509684258.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:19.248Z,1509684259.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:19.646Z,1509684259.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:20.048Z,1509684260.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:20.424Z,1509684260.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:20.827Z,1509684260.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:21.231Z,1509684261.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:21.622Z,1509684261.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:22.063Z,1509684262.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:22.453Z,1509684262.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:22.853Z,1509684262.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:23.231Z,1509684263.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:23.625Z,1509684263.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:24.028Z,1509684264.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:24.431Z,1509684264.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:24.849Z,1509684264.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:25.252Z,1509684265.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:25.648Z,1509684265.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:26.091Z,1509684266.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:26.514Z,1509684266.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:26.859Z,1509684266.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:27.227Z,1509684267.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:27.666Z,1509684267.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:28.075Z,1509684268.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:28.514Z,1509684268.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:28.857Z,1509684268.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:29.235Z,1509684269.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:29.629Z,1509684269.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:30.026Z,1509684270.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:30.426Z,1509684270.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:30.855Z,1509684270.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:31.255Z,1509684271.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:31.636Z,1509684271.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:32.035Z,1509684272.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:32.431Z,1509684272.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:32.826Z,1509684272.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:33.227Z,1509684273.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:33.625Z,1509684273.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:34.051Z,1509684274.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:34.455Z,1509684274.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:34.855Z,1509684274.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:35.227Z,1509684275.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:35.626Z,1509684275.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:36.035Z,1509684276.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:36.430Z,1509684276.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:36.851Z,1509684276.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:37.256Z,1509684277.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:37.657Z,1509684277.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:38.031Z,1509684278.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:38.430Z,1509684278.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:38.835Z,1509684278.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:39.232Z,1509684279.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:39.631Z,1509684279.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:42.994Z,1509684282.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:43.186Z,1509684283.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:43.567Z,1509684283.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:44.023Z,1509684284.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:44.347Z,1509684284.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:44.787Z,1509684284.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:45.144Z,1509684285.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:45.590Z,1509684285.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:45.994Z,1509684285.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:46.364Z,1509684286.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:46.764Z,1509684286.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:47.143Z,1509684287.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:47.547Z,1509684287.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:47.999Z,1509684287.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:48.343Z,1509684288.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:48.765Z,1509684288.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:49.165Z,1509684289.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:49.566Z,1509684289.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:50.017Z,1509684290.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:50.366Z,1509684290.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:50.744Z,1509684290.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:50.820Z,1509684290.820 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:44:50.820Z,1509684290.820 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T04:44:50.820Z,1509684290.820 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:44:50.837Z,1509684290.837 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:44:51.143Z,1509684291.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:44:51.144Z,1509684291.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:51.225Z,1509684291.225 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:44:51.334Z,1509684291.334 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:44:51.571Z,1509684291.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:44:51.576Z,1509684291.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:51.976Z,1509684291.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:44:51.977Z,1509684291.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:52.375Z,1509684292.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:44:52.375Z,1509684292.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:52.774Z,1509684292.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:44:52.775Z,1509684292.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:52.873Z,1509684292.873 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:44:52.873Z,1509684292.873 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T04:44:52.949Z,1509684292.949 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:44:52.949Z,1509684292.949 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:44:52.949Z,1509684292.949 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:44:52.949Z,1509684292.949 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:44:53.147Z,1509684293.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:44:53.148Z,1509684293.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:53.547Z,1509684293.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:44:53.548Z,1509684293.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:53.948Z,1509684293.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:44:53.949Z,1509684293.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:54.346Z,1509684294.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:44:54.347Z,1509684294.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:54.774Z,1509684294.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:44:54.775Z,1509684294.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:55.172Z,1509684295.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:44:55.173Z,1509684295.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:55.575Z,1509684295.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:44:55.576Z,1509684295.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:55.947Z,1509684295.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:44:55.948Z,1509684295.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:56.352Z,1509684296.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:44:56.353Z,1509684296.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:56.747Z,1509684296.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:44:56.748Z,1509684296.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:57.066Z,1509684297.066 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:44:57.188Z,1509684297.188 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:44:57.189Z,1509684297.189 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:44:57.190Z,1509684297.190 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:44:57.190Z,1509684297.190 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:44:57.265Z,1509684297.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T04:44:57.266Z,1509684297.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:57.589Z,1509684297.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:44:57.590Z,1509684297.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:58.012Z,1509684298.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:58.365Z,1509684298.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:58.802Z,1509684298.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:59.160Z,1509684299.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:59.583Z,1509684299.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:44:59.944Z,1509684299.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:00.371Z,1509684300.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:00.770Z,1509684300.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:01.175Z,1509684301.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:01.573Z,1509684301.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:01.942Z,1509684301.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:02.346Z,1509684302.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:02.749Z,1509684302.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:03.155Z,1509684303.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:03.550Z,1509684303.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:03.978Z,1509684303.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:04.353Z,1509684304.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:04.776Z,1509684304.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:05.149Z,1509684305.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:05.547Z,1509684305.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:05.949Z,1509684305.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:06.347Z,1509684306.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:06.777Z,1509684306.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:07.183Z,1509684307.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:07.579Z,1509684307.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:07.955Z,1509684307.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:08.355Z,1509684308.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:08.750Z,1509684308.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:09.149Z,1509684309.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:09.550Z,1509684309.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:09.956Z,1509684309.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:10.356Z,1509684310.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:10.783Z,1509684310.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:11.290Z,1509684311.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:11.547Z,1509684311.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:11.954Z,1509684311.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:12.387Z,1509684312.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:12.763Z,1509684312.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:13.198Z,1509684313.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:13.594Z,1509684313.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:13.959Z,1509684313.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:14.350Z,1509684314.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:14.752Z,1509684314.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:15.159Z,1509684315.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:15.559Z,1509684315.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:15.960Z,1509684315.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:16.360Z,1509684316.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:16.760Z,1509684316.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:17.157Z,1509684317.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:17.552Z,1509684317.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:17.953Z,1509684317.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:18.354Z,1509684318.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:18.759Z,1509684318.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:19.167Z,1509684319.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:19.560Z,1509684319.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:19.959Z,1509684319.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:20.351Z,1509684320.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:20.754Z,1509684320.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:21.161Z,1509684321.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:21.559Z,1509684321.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:21.959Z,1509684321.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:22.363Z,1509684322.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:22.763Z,1509684322.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:23.152Z,1509684323.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:23.559Z,1509684323.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:23.951Z,1509684323.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:24.351Z,1509684324.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:24.763Z,1509684324.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:25.231Z,1509684325.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:25.565Z,1509684325.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:25.987Z,1509684325.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:26.360Z,1509684326.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:26.766Z,1509684326.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:27.182Z,1509684327.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:27.567Z,1509684327.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:28.004Z,1509684328.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:28.403Z,1509684328.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:28.767Z,1509684328.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:29.143Z,1509684329.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:29.561Z,1509684329.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:29.944Z,1509684329.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:30.366Z,1509684330.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:30.767Z,1509684330.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:31.167Z,1509684331.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:31.568Z,1509684331.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:31.971Z,1509684331.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:32.343Z,1509684332.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:32.742Z,1509684332.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:33.169Z,1509684333.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:33.546Z,1509684333.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:33.970Z,1509684333.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:34.367Z,1509684334.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:34.775Z,1509684334.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:35.164Z,1509684335.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:35.547Z,1509684335.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:35.948Z,1509684335.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:36.349Z,1509684336.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:36.777Z,1509684336.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:37.187Z,1509684337.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:37.577Z,1509684337.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:37.951Z,1509684337.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:38.350Z,1509684338.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:38.750Z,1509684338.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:39.214Z,1509684339.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:39.547Z,1509684339.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:39.967Z,1509684339.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:43.119Z,1509684343.119 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T04:45:43.119Z,1509684343.119 [NAL9602] Data Fault, FailCount= 5
2017-11-03T04:45:43.119Z,1509684343.119 [NAL9602](ERROR): Data Fault
2017-11-03T04:45:43.219Z,1509684343.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:43.317Z,1509684343.317 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T04:45:43.318Z,1509684343.318 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T04:45:43.351Z,1509684343.351 [NAL9602](INFO): Powering down
2017-11-03T04:45:43.398Z,1509684343.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:43.527Z,1509684343.527 [CBIT](INFO): Critical error at 20171103T044543
2017-11-03T04:45:43.778Z,1509684343.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:44.210Z,1509684344.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:44.572Z,1509684344.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:45.011Z,1509684345.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:45.407Z,1509684345.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:45.779Z,1509684345.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:46.174Z,1509684346.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:46.573Z,1509684346.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:47.003Z,1509684347.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:47.373Z,1509684347.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:47.774Z,1509684347.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:48.179Z,1509684348.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:48.570Z,1509684348.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:49.003Z,1509684349.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:49.379Z,1509684349.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:49.773Z,1509684349.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:50.170Z,1509684350.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:50.573Z,1509684350.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:51.057Z,1509684351.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:51.373Z,1509684351.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:51.773Z,1509684351.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:52.170Z,1509684352.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:52.576Z,1509684352.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:52.974Z,1509684352.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:53.373Z,1509684353.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:53.774Z,1509684353.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:54.173Z,1509684354.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:54.576Z,1509684354.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:54.976Z,1509684354.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:55.374Z,1509684355.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:55.785Z,1509684355.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:56.175Z,1509684356.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:56.573Z,1509684356.573 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:45:56.573Z,1509684356.573 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:45:56.573Z,1509684356.573 [BPC1](ERROR): Data Fault
2017-11-03T04:45:56.583Z,1509684356.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:56.669Z,1509684356.669 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:45:56.986Z,1509684356.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:57.389Z,1509684357.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:57.819Z,1509684357.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:57.946Z,1509684357.946 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:45:57.946Z,1509684357.946 [BPC1] No Fault, FailCount= 1
2017-11-03T04:45:58.247Z,1509684358.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:58.582Z,1509684358.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:59.019Z,1509684359.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:59.419Z,1509684359.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:45:59.783Z,1509684359.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:00.222Z,1509684360.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:00.613Z,1509684360.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:00.991Z,1509684360.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:01.373Z,1509684361.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:01.774Z,1509684361.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:02.197Z,1509684362.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:02.591Z,1509684362.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:03.028Z,1509684363.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:03.387Z,1509684363.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:03.817Z,1509684363.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:04.217Z,1509684364.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:04.587Z,1509684364.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:05.075Z,1509684365.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:05.395Z,1509684365.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:05.775Z,1509684365.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:06.174Z,1509684366.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:06.629Z,1509684366.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:06.983Z,1509684366.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:07.401Z,1509684367.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:07.797Z,1509684367.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:08.187Z,1509684368.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:08.617Z,1509684368.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:09.015Z,1509684369.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:09.387Z,1509684369.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:09.787Z,1509684369.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:10.185Z,1509684370.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:10.564Z,1509684370.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:10.966Z,1509684370.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:11.462Z,1509684371.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:11.762Z,1509684371.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:12.195Z,1509684372.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:12.583Z,1509684372.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:13.028Z,1509684373.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:13.403Z,1509684373.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:13.765Z,1509684373.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:14.189Z,1509684374.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:14.582Z,1509684374.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:15.001Z,1509684375.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:15.379Z,1509684375.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:15.784Z,1509684375.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:16.168Z,1509684376.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:16.585Z,1509684376.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:17.009Z,1509684377.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:17.387Z,1509684377.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:17.786Z,1509684377.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:18.178Z,1509684378.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:18.567Z,1509684378.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:19.050Z,1509684379.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:19.371Z,1509684379.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:19.773Z,1509684379.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:20.173Z,1509684380.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:20.569Z,1509684380.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:20.973Z,1509684380.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:21.374Z,1509684381.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:21.772Z,1509684381.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:22.165Z,1509684382.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:22.608Z,1509684382.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:22.966Z,1509684382.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:23.368Z,1509684383.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:23.765Z,1509684383.765 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:23.765Z,1509684383.765 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2017-11-03T04:46:23.765Z,1509684383.765 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:46:23.767Z,1509684383.767 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:23.767Z,1509684383.767 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2017-11-03T04:46:23.767Z,1509684383.767 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:46:23.769Z,1509684383.769 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:23.769Z,1509684383.769 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2017-11-03T04:46:23.769Z,1509684383.769 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:46:23.856Z,1509684383.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:46:23.857Z,1509684383.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:46:23.857Z,1509684383.857 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:46:24.252Z,1509684384.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:46:24.252Z,1509684384.252 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2017-11-03T04:46:24.253Z,1509684384.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:46:24.253Z,1509684384.253 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2017-11-03T04:46:24.253Z,1509684384.253 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:46:24.253Z,1509684384.253 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2017-11-03T04:46:24.567Z,1509684384.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:46:24.568Z,1509684384.568 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:46:24.568Z,1509684384.568 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:46:24.568Z,1509684384.568 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:46:24.569Z,1509684384.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:46:24.569Z,1509684384.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:46:24.570Z,1509684384.570 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:46:24.570Z,1509684384.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:46:24.570Z,1509684384.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:46:24.966Z,1509684384.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:25.443Z,1509684385.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:25.768Z,1509684385.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:26.199Z,1509684386.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:26.566Z,1509684386.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:26.991Z,1509684386.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:27.399Z,1509684387.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:27.807Z,1509684387.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:28.170Z,1509684388.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:28.569Z,1509684388.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:28.981Z,1509684388.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:29.369Z,1509684389.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:29.769Z,1509684389.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:30.169Z,1509684390.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:30.562Z,1509684390.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:30.988Z,1509684390.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:31.379Z,1509684391.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:31.775Z,1509684391.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:32.173Z,1509684392.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:32.598Z,1509684392.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:33.050Z,1509684393.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:33.382Z,1509684393.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:33.785Z,1509684393.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:34.190Z,1509684394.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:34.566Z,1509684394.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:34.968Z,1509684394.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:35.390Z,1509684395.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:35.767Z,1509684395.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:36.167Z,1509684396.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:36.586Z,1509684396.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:36.967Z,1509684396.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:37.366Z,1509684397.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:37.779Z,1509684397.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:38.174Z,1509684398.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:38.567Z,1509684398.567 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T04:46:38.567Z,1509684398.567 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:46:38.567Z,1509684398.567 [BPC1](ERROR): Data Fault
2017-11-03T04:46:38.576Z,1509684398.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:38.677Z,1509684398.677 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:46:38.975Z,1509684398.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:39.374Z,1509684399.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:39.786Z,1509684399.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:39.869Z,1509684399.869 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:46:39.869Z,1509684399.869 [BPC1] No Fault, FailCount= 1
2017-11-03T04:46:40.219Z,1509684400.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:43.475Z,1509684403.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:43.647Z,1509684403.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:44.023Z,1509684404.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:44.423Z,1509684404.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:44.822Z,1509684404.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:45.231Z,1509684405.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:45.622Z,1509684405.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:46.025Z,1509684406.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:46.406Z,1509684406.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:46.822Z,1509684406.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:47.227Z,1509684407.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:47.626Z,1509684407.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:48.025Z,1509684408.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:48.433Z,1509684408.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:48.810Z,1509684408.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:49.242Z,1509684409.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:49.628Z,1509684409.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:50.037Z,1509684410.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:50.438Z,1509684410.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:50.813Z,1509684410.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:51.215Z,1509684411.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:51.633Z,1509684411.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:52.011Z,1509684412.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:52.416Z,1509684412.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:52.835Z,1509684412.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:53.064Z,1509684413.064 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:46:53.064Z,1509684413.064 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T04:46:53.064Z,1509684413.064 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:46:53.213Z,1509684413.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T04:46:53.214Z,1509684413.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:53.305Z,1509684413.305 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:46:53.469Z,1509684413.469 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:46:53.560Z,1509684413.560 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:46:53.636Z,1509684413.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T04:46:53.637Z,1509684413.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:54.017Z,1509684414.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:46:54.018Z,1509684414.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:54.415Z,1509684414.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:46:54.416Z,1509684414.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:54.851Z,1509684414.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:46:54.852Z,1509684414.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:54.949Z,1509684414.949 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:46:54.949Z,1509684414.949 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T04:46:55.180Z,1509684415.180 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:46:55.181Z,1509684415.181 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:46:55.181Z,1509684415.181 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:46:55.181Z,1509684415.181 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:46:55.243Z,1509684415.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:46:55.248Z,1509684415.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:55.662Z,1509684415.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:46:55.663Z,1509684415.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:56.017Z,1509684416.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:46:56.018Z,1509684416.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:56.462Z,1509684416.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:46:56.463Z,1509684416.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:56.813Z,1509684416.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:46:56.814Z,1509684416.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:57.242Z,1509684417.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:46:57.243Z,1509684417.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:57.647Z,1509684417.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:46:57.648Z,1509684417.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:58.024Z,1509684418.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:46:58.047Z,1509684418.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:58.413Z,1509684418.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:46:58.414Z,1509684418.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:58.814Z,1509684418.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:46:58.815Z,1509684418.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:59.213Z,1509684419.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:46:59.214Z,1509684419.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:46:59.376Z,1509684419.376 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:46:59.436Z,1509684419.436 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:46:59.437Z,1509684419.437 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:46:59.438Z,1509684419.438 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:46:59.439Z,1509684419.439 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:46:59.626Z,1509684419.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:46:59.627Z,1509684419.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:00.022Z,1509684420.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:00.423Z,1509684420.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:00.818Z,1509684420.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:01.222Z,1509684421.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:01.621Z,1509684421.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:02.026Z,1509684422.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:02.422Z,1509684422.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:02.821Z,1509684422.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:03.222Z,1509684423.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:03.622Z,1509684423.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:04.022Z,1509684424.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:04.417Z,1509684424.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:04.821Z,1509684424.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:05.221Z,1509684425.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:05.622Z,1509684425.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:06.052Z,1509684426.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:06.449Z,1509684426.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:06.821Z,1509684426.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:07.221Z,1509684427.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:07.620Z,1509684427.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:08.021Z,1509684428.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:08.427Z,1509684428.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:08.831Z,1509684428.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:09.225Z,1509684429.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:09.692Z,1509684429.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:10.023Z,1509684430.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:10.419Z,1509684430.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:10.919Z,1509684430.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:11.222Z,1509684431.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:11.643Z,1509684431.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:12.047Z,1509684432.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:12.434Z,1509684432.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:12.809Z,1509684432.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:13.233Z,1509684433.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:13.630Z,1509684433.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:14.016Z,1509684434.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:14.433Z,1509684434.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:14.814Z,1509684434.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:15.231Z,1509684435.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:15.613Z,1509684435.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:16.033Z,1509684436.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:16.413Z,1509684436.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:16.814Z,1509684436.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:17.231Z,1509684437.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:17.635Z,1509684437.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:18.015Z,1509684438.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:18.426Z,1509684438.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:18.835Z,1509684438.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:19.245Z,1509684439.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:19.627Z,1509684439.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:20.035Z,1509684440.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:20.435Z,1509684440.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:20.825Z,1509684440.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:21.234Z,1509684441.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:21.632Z,1509684441.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:22.025Z,1509684442.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:22.414Z,1509684442.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:22.833Z,1509684442.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:23.225Z,1509684443.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:23.639Z,1509684443.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:24.014Z,1509684444.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:24.451Z,1509684444.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:24.903Z,1509684444.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:25.216Z,1509684445.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:25.627Z,1509684445.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:26.044Z,1509684446.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:26.417Z,1509684446.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:26.851Z,1509684446.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:27.254Z,1509684447.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:27.620Z,1509684447.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:28.021Z,1509684448.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:28.423Z,1509684448.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:28.824Z,1509684448.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:29.222Z,1509684449.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:29.623Z,1509684449.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:30.023Z,1509684450.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:30.423Z,1509684450.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:30.819Z,1509684450.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:31.223Z,1509684451.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:31.623Z,1509684451.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:32.023Z,1509684452.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:32.419Z,1509684452.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:32.823Z,1509684452.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:33.248Z,1509684453.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:33.625Z,1509684453.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:34.025Z,1509684454.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:34.425Z,1509684454.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:34.824Z,1509684454.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:35.226Z,1509684455.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:35.622Z,1509684455.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:36.023Z,1509684456.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:36.424Z,1509684456.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:36.823Z,1509684456.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:37.224Z,1509684457.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:37.632Z,1509684457.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:38.018Z,1509684458.018 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T04:47:38.018Z,1509684458.018 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:47:38.018Z,1509684458.018 [BPC1](ERROR): Data Fault
2017-11-03T04:47:38.026Z,1509684458.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:38.105Z,1509684458.105 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:47:38.427Z,1509684458.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:38.826Z,1509684458.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:39.235Z,1509684459.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:39.321Z,1509684459.321 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:47:39.321Z,1509684459.321 [BPC1] No Fault, FailCount= 1
2017-11-03T04:47:39.682Z,1509684459.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:40.026Z,1509684460.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:40.447Z,1509684460.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:43.691Z,1509684463.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:43.777Z,1509684463.777 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T04:47:43.777Z,1509684463.777 [NAL9602] No Fault, FailCount= 5
2017-11-03T04:47:43.791Z,1509684463.791 [NAL9602](INFO): Powering up NAL9602
2017-11-03T04:47:43.855Z,1509684463.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:44.242Z,1509684464.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:44.640Z,1509684464.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:45.063Z,1509684465.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:45.440Z,1509684465.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:45.837Z,1509684465.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:46.231Z,1509684466.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:46.667Z,1509684466.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:47.026Z,1509684467.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:47.449Z,1509684467.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:47.831Z,1509684467.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:48.231Z,1509684468.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:48.626Z,1509684468.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:49.030Z,1509684469.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:49.493Z,1509684469.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:49.856Z,1509684469.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:50.226Z,1509684470.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:50.633Z,1509684470.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:51.031Z,1509684471.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:51.484Z,1509684471.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:51.835Z,1509684471.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:52.282Z,1509684472.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:52.676Z,1509684472.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:53.031Z,1509684473.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:53.475Z,1509684473.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:53.830Z,1509684473.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:54.275Z,1509684474.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:54.599Z,1509684474.599 [NAL9602](INFO): NAL9602 initialized
2017-11-03T04:47:54.674Z,1509684474.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:55.035Z,1509684475.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:55.457Z,1509684475.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:55.859Z,1509684475.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:56.230Z,1509684476.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:56.631Z,1509684476.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:57.039Z,1509684477.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:57.460Z,1509684477.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:57.858Z,1509684477.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:58.257Z,1509684478.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:58.631Z,1509684478.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:59.066Z,1509684479.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:59.432Z,1509684479.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:47:59.836Z,1509684479.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:00.231Z,1509684480.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:00.662Z,1509684480.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:01.065Z,1509684481.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:01.435Z,1509684481.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:01.863Z,1509684481.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:02.234Z,1509684482.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:02.636Z,1509684482.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:03.037Z,1509684483.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:03.522Z,1509684483.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:03.844Z,1509684483.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:04.240Z,1509684484.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:04.637Z,1509684484.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:05.037Z,1509684485.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:05.505Z,1509684485.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:05.835Z,1509684485.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:06.290Z,1509684486.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:06.691Z,1509684486.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:07.046Z,1509684487.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:07.447Z,1509684487.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:07.879Z,1509684487.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:08.234Z,1509684488.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:08.678Z,1509684488.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:09.072Z,1509684489.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:09.451Z,1509684489.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:09.847Z,1509684489.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:10.251Z,1509684490.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:10.634Z,1509684490.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:11.036Z,1509684491.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:11.434Z,1509684491.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:11.835Z,1509684491.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:12.238Z,1509684492.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:12.647Z,1509684492.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:13.087Z,1509684493.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:13.449Z,1509684493.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:13.835Z,1509684493.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:14.235Z,1509684494.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:14.639Z,1509684494.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:15.036Z,1509684495.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:15.444Z,1509684495.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:15.847Z,1509684495.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:16.247Z,1509684496.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:16.636Z,1509684496.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:17.039Z,1509684497.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:17.489Z,1509684497.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:17.835Z,1509684497.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:18.243Z,1509684498.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:18.648Z,1509684498.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:19.050Z,1509684499.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:19.503Z,1509684499.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:19.843Z,1509684499.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:20.237Z,1509684500.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:20.638Z,1509684500.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:21.095Z,1509684501.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:21.448Z,1509684501.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:21.886Z,1509684501.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:22.247Z,1509684502.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:22.663Z,1509684502.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:23.078Z,1509684503.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:23.444Z,1509684503.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:23.837Z,1509684503.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:24.238Z,1509684504.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:24.648Z,1509684504.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:25.047Z,1509684505.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:25.448Z,1509684505.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:25.843Z,1509684505.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:26.236Z,1509684506.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:26.639Z,1509684506.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:27.054Z,1509684507.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:27.449Z,1509684507.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:27.851Z,1509684507.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:28.249Z,1509684508.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:28.636Z,1509684508.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:29.040Z,1509684509.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:29.439Z,1509684509.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:29.843Z,1509684509.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:30.239Z,1509684510.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:30.655Z,1509684510.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:31.052Z,1509684511.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:31.507Z,1509684511.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:31.843Z,1509684511.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:32.240Z,1509684512.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:32.640Z,1509684512.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:33.045Z,1509684513.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:33.516Z,1509684513.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:33.855Z,1509684513.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:34.255Z,1509684514.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:34.643Z,1509684514.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:35.094Z,1509684515.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:35.427Z,1509684515.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:35.863Z,1509684515.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:36.270Z,1509684516.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:36.649Z,1509684516.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:37.100Z,1509684517.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:37.483Z,1509684517.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:37.841Z,1509684517.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:38.251Z,1509684518.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:38.631Z,1509684518.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:39.050Z,1509684519.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:39.054Z,1509684519.054 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T04:43:38.9Z
2017-11-03T04:48:39.054Z,1509684519.054 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T04:48:39.054Z,1509684519.054 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T04:48:39.452Z,1509684519.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:39.950Z,1509684519.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:40.252Z,1509684520.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:43.523Z,1509684523.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:43.657Z,1509684523.657 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20171103T001125/Courier0108.lzma
2017-11-03T04:48:43.719Z,1509684523.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:44.115Z,1509684524.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:44.459Z,1509684524.459 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0108.lzma.bak
2017-11-03T04:48:44.459Z,1509684524.459 [DataOverHttps](INFO): SBD MOMSN=5182734
2017-11-03T04:48:44.526Z,1509684524.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:45.131Z,1509684525.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:45.311Z,1509684525.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:48.517Z,1509684528.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:48.670Z,1509684528.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:49.065Z,1509684529.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:49.518Z,1509684529.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:49.895Z,1509684529.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:50.266Z,1509684530.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:53.543Z,1509684533.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:53.677Z,1509684533.677 [DataOverHttps](INFO): Sending 222 bytes from file Logs/20171103T001125/Express0109.lzma
2017-11-03T04:48:53.747Z,1509684533.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:54.163Z,1509684534.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:54.471Z,1509684534.471 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0109.lzma.bak
2017-11-03T04:48:54.471Z,1509684534.471 [DataOverHttps](INFO): SBD MOMSN=5182739
2017-11-03T04:48:54.563Z,1509684534.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:55.221Z,1509684535.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:55.224Z,1509684535.224 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T04:48:55.225Z,1509684535.225 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T04:48:55.225Z,1509684535.225 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T04:48:55.383Z,1509684535.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:55.804Z,1509684535.804 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T04:48:55.805Z,1509684535.805 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T04:48:55.805Z,1509684535.805 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T04:48:56.208Z,1509684536.208 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T04:48:56.346Z,1509684536.346 [Rowe_600LCM](INFO): Powering down
2017-11-03T04:48:58.600Z,1509684538.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:48:58.622Z,1509684538.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:58.713Z,1509684538.713 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T04:48:58.713Z,1509684538.713 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T04:48:58.787Z,1509684538.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T04:48:58.788Z,1509684538.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:59.190Z,1509684539.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T04:48:59.191Z,1509684539.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:48:59.584Z,1509684539.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T04:48:59.585Z,1509684539.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:00.018Z,1509684540.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T04:49:00.019Z,1509684540.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:00.378Z,1509684540.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T04:49:00.379Z,1509684540.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:00.769Z,1509684540.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T04:49:00.770Z,1509684540.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:01.172Z,1509684541.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T04:49:01.173Z,1509684541.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:01.583Z,1509684541.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T04:49:01.584Z,1509684541.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:01.990Z,1509684541.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T04:49:01.991Z,1509684541.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:02.383Z,1509684542.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T04:49:02.384Z,1509684542.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:02.772Z,1509684542.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T04:49:02.773Z,1509684542.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:03.173Z,1509684543.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T04:49:03.174Z,1509684543.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:03.572Z,1509684543.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T04:49:03.573Z,1509684543.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:03.972Z,1509684543.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T04:49:03.973Z,1509684543.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:04.384Z,1509684544.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T04:49:04.385Z,1509684544.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:04.790Z,1509684544.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T04:49:04.791Z,1509684544.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:05.183Z,1509684545.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-03T04:49:05.184Z,1509684545.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:05.575Z,1509684545.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-03T04:49:05.576Z,1509684545.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:05.968Z,1509684545.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-03T04:49:05.969Z,1509684545.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:06.384Z,1509684546.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-03T04:49:06.385Z,1509684546.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:06.798Z,1509684546.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T04:49:06.799Z,1509684546.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:07.183Z,1509684547.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T04:49:07.184Z,1509684547.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:07.573Z,1509684547.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T04:49:07.574Z,1509684547.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:07.977Z,1509684547.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T04:49:07.977Z,1509684547.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:08.380Z,1509684548.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T04:49:08.381Z,1509684548.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:08.784Z,1509684548.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T04:49:08.785Z,1509684548.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:09.184Z,1509684549.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T04:49:09.185Z,1509684549.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:09.564Z,1509684549.564 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:49:09.564Z,1509684549.564 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:49:09.565Z,1509684549.565 [BPC1](ERROR): Communications Fault
2017-11-03T04:49:09.572Z,1509684549.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T04:49:09.574Z,1509684549.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:09.677Z,1509684549.677 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:49:09.978Z,1509684549.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T04:49:09.979Z,1509684549.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:10.383Z,1509684550.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T04:49:10.384Z,1509684550.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:10.783Z,1509684550.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T04:49:10.784Z,1509684550.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:10.861Z,1509684550.861 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:49:10.861Z,1509684550.861 [BPC1] No Fault, FailCount= 1
2017-11-03T04:49:11.238Z,1509684551.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-03T04:49:11.239Z,1509684551.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:11.573Z,1509684551.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T04:49:11.574Z,1509684551.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:11.990Z,1509684551.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T04:49:11.991Z,1509684551.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:12.384Z,1509684552.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T04:49:12.385Z,1509684552.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:12.794Z,1509684552.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T04:49:12.795Z,1509684552.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:13.199Z,1509684553.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T04:49:13.200Z,1509684553.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:13.572Z,1509684553.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T04:49:13.573Z,1509684553.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:13.975Z,1509684553.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T04:49:13.976Z,1509684553.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:14.383Z,1509684554.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T04:49:14.384Z,1509684554.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:14.783Z,1509684554.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T04:49:14.784Z,1509684554.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:15.184Z,1509684555.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T04:49:15.185Z,1509684555.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:15.575Z,1509684555.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:15.983Z,1509684555.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:16.384Z,1509684556.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:16.787Z,1509684556.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:17.183Z,1509684557.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:17.573Z,1509684557.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:17.979Z,1509684557.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:18.383Z,1509684558.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:18.788Z,1509684558.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:19.184Z,1509684559.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:19.579Z,1509684559.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:19.973Z,1509684559.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:20.380Z,1509684560.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:20.846Z,1509684560.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:21.186Z,1509684561.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:21.575Z,1509684561.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:21.979Z,1509684561.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:22.385Z,1509684562.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:22.838Z,1509684562.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:23.184Z,1509684563.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:23.582Z,1509684563.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:24.018Z,1509684564.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:24.384Z,1509684564.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:24.818Z,1509684564.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:24.819Z,1509684564.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2017-11-03T04:49:24.819Z,1509684564.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:49:24.820Z,1509684564.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:24.821Z,1509684564.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2017-11-03T04:49:24.821Z,1509684564.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:49:24.822Z,1509684564.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:24.823Z,1509684564.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2017-11-03T04:49:24.823Z,1509684564.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:49:24.917Z,1509684564.917 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:49:24.917Z,1509684564.917 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:49:24.918Z,1509684564.918 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:49:25.304Z,1509684565.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:49:25.305Z,1509684565.305 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2017-11-03T04:49:25.305Z,1509684565.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:49:25.305Z,1509684565.305 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2017-11-03T04:49:25.306Z,1509684565.306 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:49:25.306Z,1509684565.306 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2017-11-03T04:49:25.574Z,1509684565.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:49:25.574Z,1509684565.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:49:25.575Z,1509684565.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:49:25.575Z,1509684565.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:49:25.575Z,1509684565.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:49:25.576Z,1509684565.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:49:25.576Z,1509684565.576 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:49:25.581Z,1509684565.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:49:25.581Z,1509684565.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:49:25.958Z,1509684565.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-03T04:49:25.959Z,1509684565.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:26.390Z,1509684566.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:49:26.391Z,1509684566.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:26.803Z,1509684566.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:49:26.830Z,1509684566.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:27.184Z,1509684567.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:49:27.185Z,1509684567.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:27.579Z,1509684567.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:49:27.585Z,1509684567.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:27.983Z,1509684567.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:49:27.984Z,1509684567.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:28.386Z,1509684568.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:49:28.386Z,1509684568.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:28.790Z,1509684568.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:49:28.791Z,1509684568.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:29.190Z,1509684569.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:49:29.191Z,1509684569.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:29.587Z,1509684569.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:49:29.588Z,1509684569.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:29.962Z,1509684569.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T04:49:29.963Z,1509684569.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:30.390Z,1509684570.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:49:30.391Z,1509684570.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:30.788Z,1509684570.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:49:30.789Z,1509684570.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:31.190Z,1509684571.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:49:31.191Z,1509684571.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:31.732Z,1509684571.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T04:49:31.733Z,1509684571.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:31.986Z,1509684571.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T04:49:31.987Z,1509684571.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:32.390Z,1509684572.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:49:32.391Z,1509684572.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:32.790Z,1509684572.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T04:49:32.791Z,1509684572.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:33.194Z,1509684573.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:49:33.195Z,1509684573.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:33.630Z,1509684573.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:49:33.631Z,1509684573.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:33.981Z,1509684573.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:49:33.982Z,1509684573.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:34.384Z,1509684574.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:49:34.385Z,1509684574.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:34.781Z,1509684574.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:49:34.782Z,1509684574.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:35.187Z,1509684575.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T04:49:35.188Z,1509684575.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:35.585Z,1509684575.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:49:35.586Z,1509684575.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:35.991Z,1509684575.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:49:35.992Z,1509684575.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:36.403Z,1509684576.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T04:49:36.404Z,1509684576.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:36.790Z,1509684576.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T04:49:36.791Z,1509684576.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:37.184Z,1509684577.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T04:49:37.185Z,1509684577.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:37.602Z,1509684577.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T04:49:37.603Z,1509684577.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:37.965Z,1509684577.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-03T04:49:37.966Z,1509684577.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:38.410Z,1509684578.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:49:38.411Z,1509684578.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:38.791Z,1509684578.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:49:38.792Z,1509684578.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:39.206Z,1509684579.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:49:39.207Z,1509684579.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:39.602Z,1509684579.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:49:39.603Z,1509684579.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:39.974Z,1509684579.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T04:49:39.975Z,1509684579.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:40.396Z,1509684580.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T04:49:40.397Z,1509684580.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:40.793Z,1509684580.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:49:40.794Z,1509684580.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:41.195Z,1509684581.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:49:41.195Z,1509684581.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:41.566Z,1509684581.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-03T04:49:41.567Z,1509684581.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:41.966Z,1509684581.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T04:49:41.967Z,1509684581.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:42.394Z,1509684582.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T04:49:42.395Z,1509684582.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:42.795Z,1509684582.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T04:49:42.796Z,1509684582.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:43.172Z,1509684583.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T04:49:43.173Z,1509684583.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:43.567Z,1509684583.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-03T04:49:43.568Z,1509684583.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:43.966Z,1509684583.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T04:49:43.967Z,1509684583.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:44.373Z,1509684584.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:49:44.374Z,1509684584.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:44.792Z,1509684584.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T04:49:44.793Z,1509684584.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:45.171Z,1509684585.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:45.568Z,1509684585.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:45.964Z,1509684585.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:46.394Z,1509684586.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:46.793Z,1509684586.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:47.195Z,1509684587.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:47.567Z,1509684587.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:47.966Z,1509684587.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:48.399Z,1509684588.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:48.795Z,1509684588.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:49.192Z,1509684589.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:49.566Z,1509684589.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:49.966Z,1509684589.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:50.407Z,1509684590.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:50.775Z,1509684590.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:51.182Z,1509684591.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:51.573Z,1509684591.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:52.013Z,1509684592.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:52.375Z,1509684592.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:52.780Z,1509684592.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:53.199Z,1509684593.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:53.573Z,1509684593.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:54.006Z,1509684594.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:54.376Z,1509684594.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:54.799Z,1509684594.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:55.179Z,1509684595.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:55.571Z,1509684595.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:55.972Z,1509684595.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:59.079Z,1509684599.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:59.271Z,1509684599.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:49:59.656Z,1509684599.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:00.055Z,1509684600.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:00.431Z,1509684600.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:00.832Z,1509684600.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:01.231Z,1509684601.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:01.655Z,1509684601.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:02.056Z,1509684602.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:02.462Z,1509684602.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:02.831Z,1509684602.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:03.235Z,1509684603.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:03.635Z,1509684603.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:04.034Z,1509684604.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:04.460Z,1509684604.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:04.861Z,1509684604.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:05.282Z,1509684605.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:05.631Z,1509684605.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:06.030Z,1509684606.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:06.429Z,1509684606.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:06.838Z,1509684606.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:07.279Z,1509684607.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:07.662Z,1509684607.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:08.079Z,1509684608.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:08.463Z,1509684608.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:08.861Z,1509684608.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:09.273Z,1509684609.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:09.631Z,1509684609.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:10.029Z,1509684610.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:10.464Z,1509684610.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:10.863Z,1509684610.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:11.265Z,1509684611.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:11.643Z,1509684611.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:12.031Z,1509684612.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:12.437Z,1509684612.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:12.863Z,1509684612.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:13.235Z,1509684613.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:13.648Z,1509684613.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:14.071Z,1509684614.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:14.440Z,1509684614.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:14.833Z,1509684614.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:15.247Z,1509684615.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:15.639Z,1509684615.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:16.036Z,1509684616.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:16.466Z,1509684616.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:16.844Z,1509684616.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:17.264Z,1509684617.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:17.640Z,1509684617.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:18.038Z,1509684618.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:18.438Z,1509684618.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:18.841Z,1509684618.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:19.239Z,1509684619.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:19.664Z,1509684619.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:20.095Z,1509684620.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:20.441Z,1509684620.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:20.838Z,1509684620.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:21.240Z,1509684621.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:21.683Z,1509684621.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:22.038Z,1509684622.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:22.455Z,1509684622.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:22.879Z,1509684622.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:23.246Z,1509684623.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:23.679Z,1509684623.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:24.079Z,1509684624.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:24.438Z,1509684624.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:24.844Z,1509684624.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:25.247Z,1509684625.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:25.647Z,1509684625.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:26.048Z,1509684626.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:26.447Z,1509684626.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:26.838Z,1509684626.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:27.238Z,1509684627.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:27.638Z,1509684627.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:28.042Z,1509684628.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:28.448Z,1509684628.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:28.847Z,1509684628.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:29.250Z,1509684629.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:29.635Z,1509684629.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:30.047Z,1509684630.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:30.438Z,1509684630.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:30.843Z,1509684630.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:31.243Z,1509684631.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:31.647Z,1509684631.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:32.047Z,1509684632.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:32.451Z,1509684632.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:32.838Z,1509684632.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:33.241Z,1509684633.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:33.647Z,1509684633.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:34.046Z,1509684634.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:34.447Z,1509684634.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:34.895Z,1509684634.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:35.245Z,1509684635.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:35.646Z,1509684635.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:36.091Z,1509684636.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:36.437Z,1509684636.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:36.851Z,1509684636.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:37.247Z,1509684637.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:37.685Z,1509684637.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:38.055Z,1509684638.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:38.482Z,1509684638.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:38.867Z,1509684638.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:39.241Z,1509684639.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:39.639Z,1509684639.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:40.038Z,1509684640.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:40.451Z,1509684640.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:40.848Z,1509684640.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:41.259Z,1509684641.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:41.641Z,1509684641.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:42.039Z,1509684642.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:42.441Z,1509684642.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:42.843Z,1509684642.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:43.247Z,1509684643.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:43.652Z,1509684643.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:44.055Z,1509684644.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:44.451Z,1509684644.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:44.846Z,1509684644.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:45.246Z,1509684645.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:45.636Z,1509684645.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:46.047Z,1509684646.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:46.453Z,1509684646.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:46.852Z,1509684646.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:47.258Z,1509684647.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:47.650Z,1509684647.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:48.047Z,1509684648.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:48.453Z,1509684648.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:48.856Z,1509684648.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:49.252Z,1509684649.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:49.678Z,1509684649.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:50.062Z,1509684650.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:50.480Z,1509684650.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:50.851Z,1509684650.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:51.267Z,1509684651.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:51.650Z,1509684651.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:52.067Z,1509684652.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:52.492Z,1509684652.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:52.860Z,1509684652.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:53.254Z,1509684653.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:53.652Z,1509684653.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:54.050Z,1509684654.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:54.448Z,1509684654.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:54.831Z,1509684654.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:55.250Z,1509684655.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:55.655Z,1509684655.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:50:56.059Z,1509684656.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:01.501Z,1509684661.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:01.726Z,1509684661.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:02.110Z,1509684662.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:02.484Z,1509684662.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x2077 got:0x16384
2017-11-03T04:51:02.520Z,1509684662.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:02.909Z,1509684662.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:03.374Z,1509684663.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:03.779Z,1509684663.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:04.123Z,1509684664.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:04.558Z,1509684664.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:04.919Z,1509684664.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:05.297Z,1509684665.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:05.735Z,1509684665.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:06.118Z,1509684666.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:06.485Z,1509684666.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:06.923Z,1509684666.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:07.295Z,1509684667.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:07.705Z,1509684667.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:08.089Z,1509684668.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:08.486Z,1509684668.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:08.923Z,1509684668.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:09.306Z,1509684669.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:09.665Z,1509684669.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:10.069Z,1509684670.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:10.468Z,1509684670.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:10.863Z,1509684670.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:11.262Z,1509684671.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:11.661Z,1509684671.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:12.069Z,1509684672.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:12.464Z,1509684672.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:12.867Z,1509684672.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:13.265Z,1509684673.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:13.664Z,1509684673.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:14.060Z,1509684674.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:14.460Z,1509684674.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:14.867Z,1509684674.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:15.263Z,1509684675.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:15.665Z,1509684675.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:16.068Z,1509684676.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:16.473Z,1509684676.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:16.907Z,1509684676.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:17.312Z,1509684677.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:17.662Z,1509684677.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:18.062Z,1509684678.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:18.472Z,1509684678.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:18.914Z,1509684678.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:19.276Z,1509684679.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:19.695Z,1509684679.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:20.067Z,1509684680.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:20.502Z,1509684680.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:20.863Z,1509684680.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:21.265Z,1509684681.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:21.672Z,1509684681.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:22.068Z,1509684682.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:22.474Z,1509684682.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:22.859Z,1509684682.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:23.266Z,1509684683.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:23.658Z,1509684683.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:24.065Z,1509684684.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:24.469Z,1509684684.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:24.875Z,1509684684.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:25.271Z,1509684685.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:25.661Z,1509684685.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:26.057Z,1509684686.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:26.451Z,1509684686.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:26.856Z,1509684686.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:27.257Z,1509684687.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:27.665Z,1509684687.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:28.072Z,1509684688.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:28.467Z,1509684688.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:28.859Z,1509684688.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:29.256Z,1509684689.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:29.661Z,1509684689.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:30.068Z,1509684690.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:30.469Z,1509684690.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:30.897Z,1509684690.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:31.299Z,1509684691.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:31.655Z,1509684691.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:32.051Z,1509684692.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:32.451Z,1509684692.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:32.859Z,1509684692.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:33.257Z,1509684693.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:33.664Z,1509684693.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:34.069Z,1509684694.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:34.468Z,1509684694.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:34.851Z,1509684694.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:35.302Z,1509684695.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:35.661Z,1509684695.661 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:51:35.661Z,1509684695.661 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:51:35.661Z,1509684695.661 [BPC1](ERROR): Communications Fault
2017-11-03T04:51:35.670Z,1509684695.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:35.749Z,1509684695.749 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:51:36.066Z,1509684696.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:36.485Z,1509684696.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:36.872Z,1509684696.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:36.969Z,1509684696.969 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:51:36.969Z,1509684696.969 [BPC1] No Fault, FailCount= 1
2017-11-03T04:51:37.346Z,1509684697.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:37.672Z,1509684697.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:38.066Z,1509684698.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:38.506Z,1509684698.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:38.865Z,1509684698.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:39.271Z,1509684699.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:39.676Z,1509684699.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:40.077Z,1509684700.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:40.480Z,1509684700.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:40.867Z,1509684700.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:41.265Z,1509684701.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:41.666Z,1509684701.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:42.066Z,1509684702.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:42.478Z,1509684702.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:42.907Z,1509684702.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:43.273Z,1509684703.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:43.664Z,1509684703.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:44.069Z,1509684704.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:44.464Z,1509684704.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:44.866Z,1509684704.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:45.266Z,1509684705.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:45.679Z,1509684705.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:45.773Z,1509684705.773 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T04:51:46.105Z,1509684706.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:46.486Z,1509684706.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:46.869Z,1509684706.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:47.275Z,1509684707.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:47.675Z,1509684707.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:48.071Z,1509684708.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:48.479Z,1509684708.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:48.879Z,1509684708.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:49.305Z,1509684709.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:49.691Z,1509684709.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:50.066Z,1509684710.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:50.470Z,1509684710.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:50.883Z,1509684710.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:51.271Z,1509684711.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:51.679Z,1509684711.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:52.115Z,1509684712.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:52.498Z,1509684712.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:52.886Z,1509684712.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:53.268Z,1509684713.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:53.698Z,1509684713.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:54.067Z,1509684714.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:54.476Z,1509684714.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:54.883Z,1509684714.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:55.280Z,1509684715.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:55.668Z,1509684715.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:56.073Z,1509684716.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:59.142Z,1509684719.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:59.320Z,1509684719.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:51:59.720Z,1509684719.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:00.120Z,1509684720.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:00.517Z,1509684720.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:00.898Z,1509684720.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:01.300Z,1509684721.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:01.717Z,1509684721.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:02.123Z,1509684722.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:02.517Z,1509684722.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:02.923Z,1509684722.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:03.318Z,1509684723.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:03.718Z,1509684723.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:04.140Z,1509684724.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:04.497Z,1509684724.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:04.919Z,1509684724.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:05.318Z,1509684725.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:05.739Z,1509684725.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:06.123Z,1509684726.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:06.543Z,1509684726.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:06.930Z,1509684726.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:07.289Z,1509684727.289 [PNI_TCM](ERROR): CRC does not match. Expected:0x17563 got:0x45361
2017-11-03T04:52:07.342Z,1509684727.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:07.700Z,1509684727.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:08.142Z,1509684728.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:08.521Z,1509684728.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:08.923Z,1509684728.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:09.322Z,1509684729.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:09.725Z,1509684729.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:10.118Z,1509684730.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:10.501Z,1509684730.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:10.901Z,1509684730.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:11.324Z,1509684731.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:11.723Z,1509684731.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:12.123Z,1509684732.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:12.523Z,1509684732.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:12.901Z,1509684732.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:13.319Z,1509684733.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:13.701Z,1509684733.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:14.101Z,1509684734.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:14.525Z,1509684734.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:14.927Z,1509684734.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:15.329Z,1509684735.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:15.701Z,1509684735.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:16.100Z,1509684736.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:16.530Z,1509684736.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:16.893Z,1509684736.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x58908 got:0x243
2017-11-03T04:52:16.934Z,1509684736.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:17.300Z,1509684737.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:17.729Z,1509684737.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:18.125Z,1509684738.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:18.526Z,1509684738.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:18.946Z,1509684738.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:19.307Z,1509684739.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:19.709Z,1509684739.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:20.150Z,1509684740.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:20.519Z,1509684740.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:20.935Z,1509684740.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:21.319Z,1509684741.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:21.743Z,1509684741.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:22.135Z,1509684742.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:22.503Z,1509684742.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:22.910Z,1509684742.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:23.307Z,1509684743.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:23.715Z,1509684743.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:24.113Z,1509684744.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:24.512Z,1509684744.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:24.906Z,1509684744.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:25.301Z,1509684745.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:25.706Z,1509684745.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:25.706Z,1509684745.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2017-11-03T04:52:25.706Z,1509684745.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:52:25.708Z,1509684745.708 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:25.708Z,1509684745.708 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2017-11-03T04:52:25.708Z,1509684745.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:52:25.710Z,1509684745.710 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:25.710Z,1509684745.710 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2017-11-03T04:52:25.710Z,1509684745.710 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:52:25.789Z,1509684745.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:52:25.789Z,1509684745.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:52:25.789Z,1509684745.789 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:52:26.240Z,1509684746.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:52:26.240Z,1509684746.240 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2017-11-03T04:52:26.241Z,1509684746.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:52:26.241Z,1509684746.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2017-11-03T04:52:26.241Z,1509684746.241 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:52:26.241Z,1509684746.241 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2017-11-03T04:52:26.504Z,1509684746.504 [PNI_TCM](ERROR): CRC does not match. Expected:0x8985 got:0x80
2017-11-03T04:52:26.539Z,1509684746.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:52:26.539Z,1509684746.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:52:26.540Z,1509684746.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:52:26.540Z,1509684746.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:52:26.541Z,1509684746.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:52:26.541Z,1509684746.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:52:26.541Z,1509684746.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:52:26.542Z,1509684746.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:52:26.542Z,1509684746.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:52:26.923Z,1509684746.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:52:26.924Z,1509684746.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:27.323Z,1509684747.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:52:27.324Z,1509684747.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:27.734Z,1509684747.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:52:27.735Z,1509684747.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:28.096Z,1509684748.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x60241 got:0x155
2017-11-03T04:52:28.116Z,1509684748.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:52:28.117Z,1509684748.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:28.507Z,1509684748.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:52:28.508Z,1509684748.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:28.906Z,1509684748.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:52:28.907Z,1509684748.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:29.322Z,1509684749.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:52:29.323Z,1509684749.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:29.711Z,1509684749.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x33851 got:0x190
2017-11-03T04:52:29.749Z,1509684749.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:52:29.750Z,1509684749.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:30.119Z,1509684750.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:52:30.120Z,1509684750.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:30.518Z,1509684750.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:52:30.519Z,1509684750.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:30.934Z,1509684750.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:52:30.935Z,1509684750.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:31.300Z,1509684751.300 [PNI_TCM](ERROR): CRC does not match. Expected:0x11288 got:0x16
2017-11-03T04:52:31.338Z,1509684751.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:52:31.339Z,1509684751.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:31.706Z,1509684751.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:52:31.707Z,1509684751.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:32.106Z,1509684752.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:52:32.107Z,1509684752.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:32.523Z,1509684752.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:52:32.524Z,1509684752.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:32.959Z,1509684752.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T04:52:32.959Z,1509684752.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:33.322Z,1509684753.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:52:33.323Z,1509684753.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:33.706Z,1509684753.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T04:52:33.707Z,1509684753.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:34.153Z,1509684754.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:52:34.154Z,1509684754.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:34.491Z,1509684754.491 [PNI_TCM](ERROR): CRC does not match. Expected:0x21908 got:0x43
2017-11-03T04:52:34.511Z,1509684754.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:52:34.512Z,1509684754.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:34.907Z,1509684754.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:52:34.909Z,1509684754.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:35.337Z,1509684755.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:52:35.338Z,1509684755.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:35.712Z,1509684755.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:52:35.713Z,1509684755.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:36.158Z,1509684756.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T04:52:36.159Z,1509684756.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:36.546Z,1509684756.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:52:36.547Z,1509684756.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:36.913Z,1509684756.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:52:36.913Z,1509684756.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:37.334Z,1509684757.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T04:52:37.335Z,1509684757.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:37.697Z,1509684757.697 [PNI_TCM](ERROR): CRC does not match. Expected:0x21425 got:0x96
2017-11-03T04:52:37.715Z,1509684757.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T04:52:37.716Z,1509684757.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:38.107Z,1509684758.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T04:52:38.108Z,1509684758.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:38.519Z,1509684758.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T04:52:38.520Z,1509684758.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:38.922Z,1509684758.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T04:52:38.923Z,1509684758.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:39.314Z,1509684759.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:52:39.315Z,1509684759.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:39.707Z,1509684759.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:52:39.708Z,1509684759.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:40.103Z,1509684760.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:52:40.104Z,1509684760.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:40.522Z,1509684760.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:52:40.523Z,1509684760.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:40.901Z,1509684760.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x5699 got:0x14108
2017-11-03T04:52:40.938Z,1509684760.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T04:52:40.938Z,1509684760.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:41.307Z,1509684761.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T04:52:41.308Z,1509684761.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:41.711Z,1509684761.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:52:41.712Z,1509684761.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:42.123Z,1509684762.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:52:42.124Z,1509684762.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:42.522Z,1509684762.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T04:52:42.523Z,1509684762.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:42.906Z,1509684762.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T04:52:42.907Z,1509684762.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:43.304Z,1509684763.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T04:52:43.305Z,1509684763.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:43.722Z,1509684763.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T04:52:43.723Z,1509684763.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:44.101Z,1509684764.101 [PNI_TCM](ERROR): CRC does not match. Expected:0x37963 got:0x189
2017-11-03T04:52:44.138Z,1509684764.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T04:52:44.139Z,1509684764.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:44.523Z,1509684764.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T04:52:44.524Z,1509684764.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:44.918Z,1509684764.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T04:52:44.919Z,1509684764.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:45.322Z,1509684765.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:52:45.323Z,1509684765.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:45.706Z,1509684765.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T04:52:45.706Z,1509684765.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:46.104Z,1509684766.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:46.506Z,1509684766.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:46.923Z,1509684766.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:47.297Z,1509684767.297 [PNI_TCM](ERROR): CRC does not match. Expected:0x22827 got:0x39
2017-11-03T04:52:47.354Z,1509684767.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:47.715Z,1509684767.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:48.123Z,1509684768.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:48.558Z,1509684768.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:48.911Z,1509684768.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:49.305Z,1509684769.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:49.746Z,1509684769.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:50.134Z,1509684770.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:50.510Z,1509684770.510 [PNI_TCM](ERROR): CRC does not match. Expected:0x46148 got:0x61
2017-11-03T04:52:50.558Z,1509684770.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:50.947Z,1509684770.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:51.312Z,1509684771.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:51.723Z,1509684771.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:52.099Z,1509684772.099 [PNI_TCM](ERROR): CRC does not match. Expected:0x11925 got:0x172
2017-11-03T04:52:52.137Z,1509684772.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:52.509Z,1509684772.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:52.911Z,1509684772.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:53.323Z,1509684773.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:53.711Z,1509684773.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x4318 got:0x253
2017-11-03T04:52:53.746Z,1509684773.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:54.115Z,1509684774.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:54.523Z,1509684774.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:54.935Z,1509684774.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:55.300Z,1509684775.300 [PNI_TCM](ERROR): CRC does not match. Expected:0x58064 got:0x36
2017-11-03T04:52:55.338Z,1509684775.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:55.708Z,1509684775.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:56.107Z,1509684776.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:59.212Z,1509684779.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:59.369Z,1509684779.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:52:59.771Z,1509684779.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:00.151Z,1509684780.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:00.553Z,1509684780.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:00.956Z,1509684780.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:01.359Z,1509684781.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:01.810Z,1509684781.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:02.168Z,1509684782.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:02.614Z,1509684782.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:02.961Z,1509684782.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:03.340Z,1509684783.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:03.779Z,1509684783.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:04.144Z,1509684784.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:04.591Z,1509684784.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:04.995Z,1509684784.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:05.363Z,1509684785.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:05.742Z,1509684785.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:06.143Z,1509684786.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:06.543Z,1509684786.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:06.953Z,1509684786.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:07.345Z,1509684787.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:07.771Z,1509684787.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:08.174Z,1509684788.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:08.566Z,1509684788.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:08.945Z,1509684788.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:09.344Z,1509684789.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:09.745Z,1509684789.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:10.146Z,1509684790.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:10.572Z,1509684790.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:10.967Z,1509684790.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:11.366Z,1509684791.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:11.743Z,1509684791.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:12.144Z,1509684792.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:12.544Z,1509684792.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:12.944Z,1509684792.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:13.344Z,1509684793.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:13.766Z,1509684793.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:14.174Z,1509684794.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:14.566Z,1509684794.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:14.944Z,1509684794.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:15.370Z,1509684795.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:15.775Z,1509684795.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:16.147Z,1509684796.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:16.571Z,1509684796.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:17.010Z,1509684797.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:17.371Z,1509684797.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:17.771Z,1509684797.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:18.147Z,1509684798.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:18.591Z,1509684798.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:18.990Z,1509684798.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:19.371Z,1509684799.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:19.771Z,1509684799.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:20.171Z,1509684800.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:20.544Z,1509684800.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:20.944Z,1509684800.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:21.346Z,1509684801.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:21.771Z,1509684801.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:22.170Z,1509684802.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:22.572Z,1509684802.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:22.943Z,1509684802.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:23.347Z,1509684803.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:23.747Z,1509684803.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:24.198Z,1509684804.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:24.574Z,1509684804.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:24.975Z,1509684804.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:25.375Z,1509684805.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:25.754Z,1509684805.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:26.146Z,1509684806.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:26.548Z,1509684806.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:26.955Z,1509684806.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:27.376Z,1509684807.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:27.774Z,1509684807.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:28.174Z,1509684808.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:28.546Z,1509684808.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:28.947Z,1509684808.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:29.347Z,1509684809.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:29.777Z,1509684809.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:30.175Z,1509684810.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:30.575Z,1509684810.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:30.993Z,1509684810.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:31.355Z,1509684811.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:31.783Z,1509684811.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:32.147Z,1509684812.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:32.591Z,1509684812.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:32.991Z,1509684812.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:33.375Z,1509684813.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:33.747Z,1509684813.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:34.148Z,1509684814.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:34.547Z,1509684814.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:34.948Z,1509684814.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:35.348Z,1509684815.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:35.775Z,1509684815.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:36.173Z,1509684816.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:36.575Z,1509684816.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:36.948Z,1509684816.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:37.348Z,1509684817.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:37.748Z,1509684817.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:38.146Z,1509684818.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:38.573Z,1509684818.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:38.976Z,1509684818.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:39.374Z,1509684819.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:39.749Z,1509684819.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:40.147Z,1509684820.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:40.547Z,1509684820.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:40.950Z,1509684820.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:41.349Z,1509684821.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:41.774Z,1509684821.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:42.174Z,1509684822.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:42.574Z,1509684822.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:42.948Z,1509684822.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:43.349Z,1509684823.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:43.748Z,1509684823.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:44.141Z,1509684824.141 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T04:53:44.141Z,1509684824.141 [BPC1] Data Fault, FailCount= 1
2017-11-03T04:53:44.141Z,1509684824.141 [BPC1](ERROR): Data Fault
2017-11-03T04:53:44.149Z,1509684824.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:44.249Z,1509684824.249 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T04:53:44.553Z,1509684824.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:44.975Z,1509684824.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:45.376Z,1509684825.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:45.468Z,1509684825.468 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:53:45.469Z,1509684825.469 [BPC1] No Fault, FailCount= 1
2017-11-03T04:53:45.819Z,1509684825.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:46.147Z,1509684826.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:46.548Z,1509684826.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:46.983Z,1509684826.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:47.375Z,1509684827.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:47.776Z,1509684827.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:48.174Z,1509684828.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:48.547Z,1509684828.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:48.977Z,1509684828.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:49.375Z,1509684829.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:49.775Z,1509684829.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:50.176Z,1509684830.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:50.547Z,1509684830.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:50.945Z,1509684830.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:51.376Z,1509684831.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:51.773Z,1509684831.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:52.175Z,1509684832.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:52.548Z,1509684832.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:52.955Z,1509684832.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:53.371Z,1509684833.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:53.757Z,1509684833.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:54.176Z,1509684834.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:54.550Z,1509684834.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:54.952Z,1509684834.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:55.351Z,1509684835.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:55.776Z,1509684835.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:55.779Z,1509684835.779 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T04:53:55.779Z,1509684835.779 [Default:CheckIn:C.Wait] Stopped
2017-11-03T04:53:55.780Z,1509684835.780 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T04:53:55.780Z,1509684835.780 [Default:CheckIn:D] Running Loop=1
2017-11-03T04:53:56.178Z,1509684836.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:56.181Z,1509684836.181 [Default:CheckIn:D] Stopped
2017-11-03T04:53:56.181Z,1509684836.181 [Default:CheckIn:E] Running Loop=1
2017-11-03T04:53:59.347Z,1509684839.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:59.354Z,1509684839.354 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.810254 min 
2017-11-03T04:53:59.354Z,1509684839.354 [Default:CheckIn:E] Stopped
2017-11-03T04:53:59.355Z,1509684839.355 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T04:53:59.355Z,1509684839.355 [Default:CheckIn] Stopped
2017-11-03T04:53:59.355Z,1509684839.355 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T04:53:59.355Z,1509684839.355 [Default:CheckIn](INFO): Running loop #28
2017-11-03T04:53:59.355Z,1509684839.355 [Default:CheckIn] Running Loop=28
2017-11-03T04:53:59.355Z,1509684839.355 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T04:53:59.355Z,1509684839.355 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T04:53:59.490Z,1509684839.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:53:59.938Z,1509684839.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:00.303Z,1509684840.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:00.733Z,1509684840.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:01.134Z,1509684841.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:01.511Z,1509684841.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:01.915Z,1509684841.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:02.311Z,1509684842.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:02.692Z,1509684842.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:03.094Z,1509684843.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:03.507Z,1509684843.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:03.899Z,1509684843.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:04.297Z,1509684844.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:04.708Z,1509684844.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:05.111Z,1509684845.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:05.506Z,1509684845.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:05.899Z,1509684845.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:06.303Z,1509684846.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:06.698Z,1509684846.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:07.106Z,1509684847.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:07.503Z,1509684847.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:07.910Z,1509684847.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:08.309Z,1509684848.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:08.703Z,1509684848.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:09.102Z,1509684849.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:09.506Z,1509684849.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:09.897Z,1509684849.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:10.297Z,1509684850.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:10.709Z,1509684850.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:11.111Z,1509684851.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:11.510Z,1509684851.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:11.900Z,1509684851.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:12.303Z,1509684852.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:12.726Z,1509684852.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:13.123Z,1509684853.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:13.507Z,1509684853.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:13.945Z,1509684853.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:14.308Z,1509684854.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:14.731Z,1509684854.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:15.111Z,1509684855.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:15.501Z,1509684855.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:15.899Z,1509684855.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:16.299Z,1509684856.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:16.708Z,1509684856.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:17.106Z,1509684857.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:17.506Z,1509684857.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:17.900Z,1509684857.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:18.303Z,1509684858.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:18.699Z,1509684858.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:19.102Z,1509684859.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:19.507Z,1509684859.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:19.910Z,1509684859.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:20.310Z,1509684860.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:20.703Z,1509684860.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:21.099Z,1509684861.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:21.501Z,1509684861.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:21.899Z,1509684861.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:22.299Z,1509684862.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:22.709Z,1509684862.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:23.112Z,1509684863.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:23.518Z,1509684863.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:23.901Z,1509684863.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:24.291Z,1509684864.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:24.703Z,1509684864.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:25.103Z,1509684865.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:25.515Z,1509684865.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:25.914Z,1509684865.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:26.319Z,1509684866.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:26.723Z,1509684866.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:27.127Z,1509684867.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:27.490Z,1509684867.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:27.919Z,1509684867.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:28.287Z,1509684868.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:28.756Z,1509684868.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:29.131Z,1509684869.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:29.514Z,1509684869.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:29.895Z,1509684869.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:30.287Z,1509684870.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:30.687Z,1509684870.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:31.091Z,1509684871.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:31.514Z,1509684871.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:31.916Z,1509684871.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:32.323Z,1509684872.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:32.687Z,1509684872.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:33.087Z,1509684873.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:33.515Z,1509684873.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:33.895Z,1509684873.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:34.291Z,1509684874.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:34.720Z,1509684874.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:35.118Z,1509684875.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:35.518Z,1509684875.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:35.895Z,1509684875.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:36.294Z,1509684876.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:36.698Z,1509684876.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:37.087Z,1509684877.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:37.521Z,1509684877.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:37.919Z,1509684877.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:38.313Z,1509684878.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:38.695Z,1509684878.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:39.095Z,1509684879.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:39.491Z,1509684879.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:39.895Z,1509684879.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:40.294Z,1509684880.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:40.721Z,1509684880.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:41.121Z,1509684881.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:41.566Z,1509684881.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:41.890Z,1509684881.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:42.327Z,1509684882.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:42.694Z,1509684882.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:43.125Z,1509684883.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:43.531Z,1509684883.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:43.906Z,1509684883.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:44.302Z,1509684884.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:44.697Z,1509684884.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:45.095Z,1509684885.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:45.496Z,1509684885.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:45.897Z,1509684885.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:46.294Z,1509684886.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:46.698Z,1509684886.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:47.098Z,1509684887.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:47.499Z,1509684887.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:47.896Z,1509684887.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:48.290Z,1509684888.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:48.694Z,1509684888.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:49.096Z,1509684889.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:49.503Z,1509684889.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:49.903Z,1509684889.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:50.302Z,1509684890.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:50.697Z,1509684890.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:51.096Z,1509684891.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:51.497Z,1509684891.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:51.895Z,1509684891.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:52.295Z,1509684892.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:52.700Z,1509684892.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:53.100Z,1509684893.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:53.506Z,1509684893.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:53.882Z,1509684893.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:53.897Z,1509684893.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:54.280Z,1509684894.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:54.295Z,1509684894.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:54.682Z,1509684894.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:54.697Z,1509684894.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:55.082Z,1509684895.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:55.102Z,1509684895.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:55.486Z,1509684895.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:55.562Z,1509684895.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:55.891Z,1509684895.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:55.910Z,1509684895.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:56.292Z,1509684896.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:56.331Z,1509684896.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:59.384Z,1509684899.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:59.399Z,1509684899.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:59.515Z,1509684899.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:59.586Z,1509684899.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:54:59.937Z,1509684899.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:54:59.984Z,1509684899.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:00.340Z,1509684900.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:00.359Z,1509684900.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:00.736Z,1509684900.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:00.758Z,1509684900.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:01.126Z,1509684901.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:01.141Z,1509684901.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:01.525Z,1509684901.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:01.540Z,1509684901.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:01.926Z,1509684901.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:01.941Z,1509684901.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:02.326Z,1509684902.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:02.341Z,1509684902.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:02.736Z,1509684902.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:02.751Z,1509684902.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:03.136Z,1509684903.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:03.158Z,1509684903.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:03.537Z,1509684903.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:03.558Z,1509684903.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:03.925Z,1509684903.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:03.940Z,1509684903.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:04.316Z,1509684904.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:04.339Z,1509684904.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:04.713Z,1509684904.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:04.738Z,1509684904.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:05.126Z,1509684905.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:05.147Z,1509684905.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:05.536Z,1509684905.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:05.551Z,1509684905.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:05.933Z,1509684905.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:05.947Z,1509684905.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:06.336Z,1509684906.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:06.351Z,1509684906.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:06.726Z,1509684906.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:06.747Z,1509684906.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:07.127Z,1509684907.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:07.146Z,1509684907.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:07.525Z,1509684907.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:07.541Z,1509684907.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:07.925Z,1509684907.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:07.941Z,1509684907.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:08.327Z,1509684908.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:08.342Z,1509684908.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:08.733Z,1509684908.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:08.749Z,1509684908.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:09.137Z,1509684909.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:09.159Z,1509684909.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:09.537Z,1509684909.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:09.552Z,1509684909.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:09.925Z,1509684909.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:09.941Z,1509684909.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:10.325Z,1509684910.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:10.341Z,1509684910.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:10.728Z,1509684910.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:10.743Z,1509684910.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:11.126Z,1509684911.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:11.141Z,1509684911.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:11.537Z,1509684911.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:11.552Z,1509684911.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:11.931Z,1509684911.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:11.981Z,1509684911.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:12.334Z,1509684912.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:12.391Z,1509684912.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:12.717Z,1509684912.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:12.752Z,1509684912.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:13.110Z,1509684913.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:13.151Z,1509684913.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:13.519Z,1509684913.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:13.567Z,1509684913.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:13.917Z,1509684913.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:13.949Z,1509684913.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:14.318Z,1509684914.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:14.367Z,1509684914.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:14.729Z,1509684914.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:14.756Z,1509684914.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:15.129Z,1509684915.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:15.193Z,1509684915.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:15.525Z,1509684915.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:15.553Z,1509684915.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:15.917Z,1509684915.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:15.932Z,1509684915.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:16.319Z,1509684916.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:16.334Z,1509684916.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:16.718Z,1509684916.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:16.733Z,1509684916.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:17.117Z,1509684917.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:17.132Z,1509684917.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:17.530Z,1509684917.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:17.559Z,1509684917.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:17.930Z,1509684917.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:17.955Z,1509684917.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:18.330Z,1509684918.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:18.355Z,1509684918.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:18.716Z,1509684918.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:18.732Z,1509684918.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:19.116Z,1509684919.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:19.131Z,1509684919.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:19.516Z,1509684919.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:19.531Z,1509684919.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:19.917Z,1509684919.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:19.932Z,1509684919.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:20.315Z,1509684920.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:20.330Z,1509684920.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:20.730Z,1509684920.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:20.755Z,1509684920.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:21.130Z,1509684921.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:21.153Z,1509684921.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:21.529Z,1509684921.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:21.555Z,1509684921.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:21.915Z,1509684921.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:21.930Z,1509684921.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:22.315Z,1509684922.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:22.331Z,1509684922.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:22.716Z,1509684922.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:22.730Z,1509684922.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:23.115Z,1509684923.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:23.134Z,1509684923.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:23.529Z,1509684923.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:23.554Z,1509684923.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:23.929Z,1509684923.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:23.962Z,1509684923.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:24.329Z,1509684924.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:24.353Z,1509684924.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:24.716Z,1509684924.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:24.731Z,1509684924.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:25.115Z,1509684925.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:25.129Z,1509684925.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:25.515Z,1509684925.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:25.530Z,1509684925.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:25.919Z,1509684925.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:25.935Z,1509684925.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:26.315Z,1509684926.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:26.330Z,1509684926.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:26.729Z,1509684926.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:26.779Z,1509684926.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:26.779Z,1509684926.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2017-11-03T04:55:26.779Z,1509684926.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:55:26.781Z,1509684926.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:26.781Z,1509684926.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2017-11-03T04:55:26.781Z,1509684926.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:55:26.783Z,1509684926.783 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:26.783Z,1509684926.783 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2017-11-03T04:55:26.783Z,1509684926.783 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:55:26.877Z,1509684926.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:55:26.877Z,1509684926.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:55:26.877Z,1509684926.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:55:27.137Z,1509684927.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:27.277Z,1509684927.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:55:27.277Z,1509684927.277 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2017-11-03T04:55:27.277Z,1509684927.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:55:27.277Z,1509684927.277 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2017-11-03T04:55:27.278Z,1509684927.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:55:27.278Z,1509684927.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2017-11-03T04:55:27.537Z,1509684927.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:27.560Z,1509684927.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:55:27.561Z,1509684927.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:55:27.561Z,1509684927.561 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:55:27.561Z,1509684927.561 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:55:27.562Z,1509684927.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:55:27.562Z,1509684927.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:55:27.562Z,1509684927.562 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:55:27.563Z,1509684927.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:55:27.563Z,1509684927.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:55:27.914Z,1509684927.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:27.945Z,1509684927.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:55:27.946Z,1509684927.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:28.322Z,1509684928.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:28.337Z,1509684928.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:55:28.338Z,1509684928.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:28.726Z,1509684928.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:28.778Z,1509684928.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T04:55:28.779Z,1509684928.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:29.126Z,1509684929.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:29.141Z,1509684929.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:55:29.142Z,1509684929.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:29.529Z,1509684929.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:29.578Z,1509684929.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:55:29.579Z,1509684929.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:29.929Z,1509684929.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:29.978Z,1509684929.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T04:55:29.979Z,1509684929.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:30.330Z,1509684930.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:30.344Z,1509684930.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:55:30.345Z,1509684930.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:30.723Z,1509684930.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:30.738Z,1509684930.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:55:30.739Z,1509684930.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:31.126Z,1509684931.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:31.140Z,1509684931.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:55:31.141Z,1509684931.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:31.518Z,1509684931.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:31.532Z,1509684931.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T04:55:31.533Z,1509684931.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:31.926Z,1509684931.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:31.941Z,1509684931.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:55:31.942Z,1509684931.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:32.326Z,1509684932.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:32.340Z,1509684932.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T04:55:32.341Z,1509684932.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:32.727Z,1509684932.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:32.746Z,1509684932.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:55:32.747Z,1509684932.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:33.133Z,1509684933.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:33.148Z,1509684933.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T04:55:33.149Z,1509684933.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:33.529Z,1509684933.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:33.550Z,1509684933.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T04:55:33.551Z,1509684933.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:33.926Z,1509684933.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:33.941Z,1509684933.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T04:55:33.941Z,1509684933.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:34.323Z,1509684934.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:34.338Z,1509684934.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:55:34.339Z,1509684934.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:34.726Z,1509684934.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:34.740Z,1509684934.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T04:55:34.741Z,1509684934.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:35.120Z,1509684935.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:35.134Z,1509684935.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:55:35.135Z,1509684935.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:35.529Z,1509684935.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:35.544Z,1509684935.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:55:35.545Z,1509684935.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:35.928Z,1509684935.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:35.946Z,1509684935.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:55:35.947Z,1509684935.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:36.330Z,1509684936.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:36.345Z,1509684936.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:55:36.346Z,1509684936.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:36.723Z,1509684936.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:36.738Z,1509684936.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:55:36.739Z,1509684936.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:37.126Z,1509684937.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:37.140Z,1509684937.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T04:55:37.141Z,1509684937.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:37.526Z,1509684937.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:37.541Z,1509684937.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:55:37.542Z,1509684937.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:37.922Z,1509684937.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:37.937Z,1509684937.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:55:37.938Z,1509684937.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:38.326Z,1509684938.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:38.341Z,1509684938.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T04:55:38.342Z,1509684938.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:38.730Z,1509684938.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:38.745Z,1509684938.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T04:55:38.746Z,1509684938.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:39.129Z,1509684939.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:39.144Z,1509684939.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T04:55:39.145Z,1509684939.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:39.529Z,1509684939.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:39.550Z,1509684939.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T04:55:39.551Z,1509684939.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:39.926Z,1509684939.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:39.941Z,1509684939.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T04:55:39.942Z,1509684939.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:40.323Z,1509684940.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:40.338Z,1509684940.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:55:40.339Z,1509684940.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:40.726Z,1509684940.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:40.740Z,1509684940.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:55:40.741Z,1509684940.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:41.126Z,1509684941.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:41.146Z,1509684941.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T04:55:41.147Z,1509684941.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:41.531Z,1509684941.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:41.606Z,1509684941.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:55:41.607Z,1509684941.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:41.936Z,1509684941.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:41.995Z,1509684941.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T04:55:41.996Z,1509684941.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:42.332Z,1509684942.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:42.347Z,1509684942.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T04:55:42.348Z,1509684942.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:42.723Z,1509684942.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:42.738Z,1509684942.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:55:42.739Z,1509684942.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:43.112Z,1509684943.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:43.162Z,1509684943.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:55:43.163Z,1509684943.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:43.526Z,1509684943.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:43.541Z,1509684943.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T04:55:43.541Z,1509684943.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:43.924Z,1509684943.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:43.978Z,1509684943.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T04:55:43.979Z,1509684943.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:44.326Z,1509684944.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:44.378Z,1509684944.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T04:55:44.379Z,1509684944.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:44.736Z,1509684944.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:44.751Z,1509684944.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T04:55:44.752Z,1509684944.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:45.136Z,1509684945.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:45.151Z,1509684945.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T04:55:45.152Z,1509684945.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:45.536Z,1509684945.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:45.554Z,1509684945.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T04:55:45.555Z,1509684945.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:45.926Z,1509684945.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:45.946Z,1509684945.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T04:55:45.947Z,1509684945.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:46.322Z,1509684946.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:46.343Z,1509684946.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:55:46.344Z,1509684946.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:46.724Z,1509684946.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:46.746Z,1509684946.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T04:55:46.747Z,1509684946.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:47.121Z,1509684947.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:47.136Z,1509684947.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:47.536Z,1509684947.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:47.551Z,1509684947.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:47.933Z,1509684947.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:47.948Z,1509684947.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:48.336Z,1509684948.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:48.351Z,1509684948.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:48.724Z,1509684948.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:48.739Z,1509684948.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:49.126Z,1509684949.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:49.141Z,1509684949.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:49.524Z,1509684949.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:49.539Z,1509684949.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:49.924Z,1509684949.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:49.939Z,1509684949.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:50.326Z,1509684950.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:50.341Z,1509684950.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:50.733Z,1509684950.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:50.748Z,1509684950.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:51.136Z,1509684951.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:51.151Z,1509684951.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:51.537Z,1509684951.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:51.552Z,1509684951.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:51.927Z,1509684951.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:51.947Z,1509684951.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:52.325Z,1509684952.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:52.340Z,1509684952.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:52.726Z,1509684952.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:52.741Z,1509684952.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:53.112Z,1509684953.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:53.144Z,1509684953.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:53.539Z,1509684953.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:53.554Z,1509684953.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:53.942Z,1509684953.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:53.957Z,1509684953.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:54.334Z,1509684954.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:54.351Z,1509684954.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:54.714Z,1509684954.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:54.745Z,1509684954.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:55.120Z,1509684955.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:55.147Z,1509684955.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:55.518Z,1509684955.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:55.545Z,1509684955.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:55.921Z,1509684955.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:55.991Z,1509684955.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:55:56.320Z,1509684956.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:55:56.367Z,1509684956.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:01.782Z,1509684961.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:01.806Z,1509684961.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:01.970Z,1509684961.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:01.000Z,1509684962.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:02.349Z,1509684962.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:02.393Z,1509684962.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:02.740Z,1509684962.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:02.810Z,1509684962.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:03.133Z,1509684963.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:03.190Z,1509684963.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:03.539Z,1509684963.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:03.616Z,1509684963.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:03.937Z,1509684963.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:04.039Z,1509684964.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:04.335Z,1509684964.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:04.365Z,1509684964.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:04.747Z,1509684964.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:04.816Z,1509684964.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:05.151Z,1509684965.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:05.175Z,1509684965.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:05.546Z,1509684965.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:05.571Z,1509684965.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:05.929Z,1509684965.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:05.973Z,1509684965.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:06.328Z,1509684966.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:06.371Z,1509684966.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:06.729Z,1509684966.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:06.769Z,1509684966.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:07.129Z,1509684967.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:07.164Z,1509684967.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:07.540Z,1509684967.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:07.577Z,1509684967.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:07.958Z,1509684967.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:07.974Z,1509684967.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:08.340Z,1509684968.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:08.374Z,1509684968.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:08.728Z,1509684968.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:08.763Z,1509684968.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:09.136Z,1509684969.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:09.186Z,1509684969.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:09.542Z,1509684969.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:09.591Z,1509684969.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:09.933Z,1509684969.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:09.947Z,1509684969.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:10.345Z,1509684970.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:10.374Z,1509684970.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:10.745Z,1509684970.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:10.780Z,1509684970.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:11.146Z,1509684971.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:11.176Z,1509684971.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:11.536Z,1509684971.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:11.550Z,1509684971.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:11.936Z,1509684971.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:11.951Z,1509684971.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:12.346Z,1509684972.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:12.377Z,1509684972.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:12.745Z,1509684972.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:12.760Z,1509684972.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:13.146Z,1509684973.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:13.177Z,1509684973.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:13.532Z,1509684973.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:13.547Z,1509684973.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:13.931Z,1509684973.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:13.946Z,1509684973.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:14.345Z,1509684974.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:14.380Z,1509684974.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:14.737Z,1509684974.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:14.752Z,1509684974.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:15.145Z,1509684975.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:15.160Z,1509684975.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:15.532Z,1509684975.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:15.555Z,1509684975.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:15.932Z,1509684975.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:16.018Z,1509684976.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:16.338Z,1509684976.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:16.353Z,1509684976.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:16.748Z,1509684976.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:16.764Z,1509684976.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:17.147Z,1509684977.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:17.195Z,1509684977.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:17.547Z,1509684977.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:17.566Z,1509684977.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:17.938Z,1509684977.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:17.995Z,1509684977.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:18.338Z,1509684978.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:18.390Z,1509684978.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:18.738Z,1509684978.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:18.753Z,1509684978.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:19.139Z,1509684979.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:19.159Z,1509684979.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:19.548Z,1509684979.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:19.563Z,1509684979.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:19.947Z,1509684979.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:19.962Z,1509684979.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:20.348Z,1509684980.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:20.363Z,1509684980.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:20.732Z,1509684980.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:20.748Z,1509684980.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:21.124Z,1509684981.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:21.148Z,1509684981.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:21.540Z,1509684981.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:21.555Z,1509684981.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:21.938Z,1509684981.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:21.959Z,1509684981.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:22.347Z,1509684982.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:22.362Z,1509684982.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:22.748Z,1509684982.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:22.763Z,1509684982.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:23.148Z,1509684983.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:23.163Z,1509684983.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:23.538Z,1509684983.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:23.553Z,1509684983.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:23.928Z,1509684983.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:23.951Z,1509684983.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:24.341Z,1509684984.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:24.357Z,1509684984.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:24.745Z,1509684984.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:24.759Z,1509684984.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:25.141Z,1509684985.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:25.157Z,1509684985.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:25.532Z,1509684985.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:25.547Z,1509684985.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:25.928Z,1509684985.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:25.942Z,1509684985.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:26.342Z,1509684986.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:26.357Z,1509684986.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:26.746Z,1509684986.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:26.761Z,1509684986.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:27.141Z,1509684987.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:27.158Z,1509684987.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:27.536Z,1509684987.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:27.551Z,1509684987.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:27.929Z,1509684987.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:27.944Z,1509684987.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:28.341Z,1509684988.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:28.356Z,1509684988.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:28.741Z,1509684988.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:28.756Z,1509684988.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:29.142Z,1509684989.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:29.163Z,1509684989.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:29.528Z,1509684989.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:29.543Z,1509684989.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:29.928Z,1509684989.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:29.944Z,1509684989.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:30.331Z,1509684990.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:30.375Z,1509684990.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:30.757Z,1509684990.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:30.791Z,1509684990.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:31.146Z,1509684991.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:31.161Z,1509684991.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:31.542Z,1509684991.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:31.606Z,1509684991.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:31.931Z,1509684991.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:31.978Z,1509684991.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:32.330Z,1509684992.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:32.346Z,1509684992.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:32.727Z,1509684992.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:32.775Z,1509684992.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:33.128Z,1509684993.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:33.168Z,1509684993.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:33.537Z,1509684993.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:33.559Z,1509684993.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:33.955Z,1509684993.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:33.974Z,1509684993.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:34.338Z,1509684994.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:34.366Z,1509684994.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:34.727Z,1509684994.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:34.763Z,1509684994.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:35.128Z,1509684995.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:35.158Z,1509684995.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:35.532Z,1509684995.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:35.557Z,1509684995.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:35.931Z,1509684995.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:35.957Z,1509684995.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:36.351Z,1509684996.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:36.371Z,1509684996.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:36.753Z,1509684996.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:36.774Z,1509684996.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:37.162Z,1509684997.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:37.177Z,1509684997.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:37.531Z,1509684997.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:37.558Z,1509684997.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:37.930Z,1509684997.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:37.955Z,1509684997.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:38.349Z,1509684998.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:38.365Z,1509684998.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:38.753Z,1509684998.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:38.775Z,1509684998.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:39.148Z,1509684999.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:39.163Z,1509684999.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:39.531Z,1509684999.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:39.556Z,1509684999.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:39.931Z,1509684999.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:39.955Z,1509684999.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:40.348Z,1509685000.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:40.363Z,1509685000.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:40.753Z,1509685000.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:40.774Z,1509685000.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:41.148Z,1509685001.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:41.163Z,1509685001.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:41.531Z,1509685001.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:41.556Z,1509685001.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:41.930Z,1509685001.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:41.955Z,1509685001.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:42.349Z,1509685002.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:42.364Z,1509685002.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:42.752Z,1509685002.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:42.774Z,1509685002.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:43.149Z,1509685003.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:43.163Z,1509685003.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:43.531Z,1509685003.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:43.557Z,1509685003.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:43.930Z,1509685003.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:43.955Z,1509685003.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:44.349Z,1509685004.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:44.364Z,1509685004.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:44.753Z,1509685004.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:44.768Z,1509685004.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:45.148Z,1509685005.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:45.210Z,1509685005.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:45.531Z,1509685005.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:45.568Z,1509685005.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:45.924Z,1509685005.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:45.978Z,1509685005.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:46.341Z,1509685006.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:46.367Z,1509685006.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:46.745Z,1509685006.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:46.795Z,1509685006.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:47.142Z,1509685007.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:47.166Z,1509685007.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:47.528Z,1509685007.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:47.570Z,1509685007.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:47.931Z,1509685007.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:47.984Z,1509685007.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:48.062Z,1509685008.062 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T04:56:48.062Z,1509685008.062 [DropWeight] No Fault, FailCount= 1
2017-11-03T04:56:48.328Z,1509685008.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:48.367Z,1509685008.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:48.741Z,1509685008.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:48.771Z,1509685008.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:49.141Z,1509685009.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:49.172Z,1509685009.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:49.541Z,1509685009.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:49.576Z,1509685009.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:49.927Z,1509685009.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:49.942Z,1509685009.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:50.327Z,1509685010.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:50.342Z,1509685010.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:50.732Z,1509685010.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:50.754Z,1509685010.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:51.131Z,1509685011.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:51.146Z,1509685011.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:51.541Z,1509685011.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:51.556Z,1509685011.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:51.945Z,1509685011.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:51.977Z,1509685011.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:52.345Z,1509685012.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:52.377Z,1509685012.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:52.727Z,1509685012.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:52.742Z,1509685012.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:53.135Z,1509685013.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:53.155Z,1509685013.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:53.532Z,1509685013.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:53.555Z,1509685013.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:53.927Z,1509685013.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:53.942Z,1509685013.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:54.345Z,1509685014.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:54.377Z,1509685014.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:54.745Z,1509685014.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:54.775Z,1509685014.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:55.149Z,1509685015.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:55.175Z,1509685015.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:55.533Z,1509685015.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:55.548Z,1509685015.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:55.932Z,1509685015.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:55.947Z,1509685015.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:56.350Z,1509685016.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:56.374Z,1509685016.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:59.454Z,1509685019.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:59.477Z,1509685019.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:56:59.629Z,1509685019.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:56:59.668Z,1509685019.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:00.014Z,1509685020.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:00.086Z,1509685020.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:00.408Z,1509685020.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:00.438Z,1509685020.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:00.840Z,1509685020.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:00.856Z,1509685020.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:01.207Z,1509685021.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:01.251Z,1509685021.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:01.626Z,1509685021.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:01.641Z,1509685021.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:02.025Z,1509685022.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:02.079Z,1509685022.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:02.430Z,1509685022.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:02.486Z,1509685022.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:02.805Z,1509685022.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:02.839Z,1509685022.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:03.204Z,1509685023.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:03.235Z,1509685023.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:03.608Z,1509685023.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:03.642Z,1509685023.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:04.005Z,1509685024.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:04.020Z,1509685024.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:04.417Z,1509685024.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:04.450Z,1509685024.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:04.821Z,1509685024.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:04.846Z,1509685024.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:05.217Z,1509685025.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:05.243Z,1509685025.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:05.604Z,1509685025.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:05.619Z,1509685025.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:06.007Z,1509685026.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:06.021Z,1509685026.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:06.405Z,1509685026.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:06.419Z,1509685026.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:06.805Z,1509685026.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:06.821Z,1509685026.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:07.200Z,1509685027.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:07.215Z,1509685027.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:07.617Z,1509685027.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:07.644Z,1509685027.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:08.021Z,1509685028.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:08.055Z,1509685028.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:08.413Z,1509685028.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:08.447Z,1509685028.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:08.805Z,1509685028.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:08.820Z,1509685028.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:09.211Z,1509685029.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:09.246Z,1509685029.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:09.605Z,1509685029.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:09.619Z,1509685029.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:10.004Z,1509685030.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:10.019Z,1509685030.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:10.418Z,1509685030.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:10.441Z,1509685030.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:10.832Z,1509685030.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:10.847Z,1509685030.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:11.218Z,1509685031.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:11.240Z,1509685031.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:11.604Z,1509685031.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:11.619Z,1509685031.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:12.007Z,1509685032.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:12.022Z,1509685032.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:12.403Z,1509685032.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:12.442Z,1509685032.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:12.812Z,1509685032.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:12.848Z,1509685032.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:13.211Z,1509685033.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:13.226Z,1509685033.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:13.626Z,1509685033.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:13.655Z,1509685033.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:14.017Z,1509685034.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:14.049Z,1509685034.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:14.416Z,1509685034.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:14.495Z,1509685034.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:14.805Z,1509685034.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:14.867Z,1509685034.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:15.209Z,1509685035.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:15.224Z,1509685035.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:15.612Z,1509685035.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:15.627Z,1509685035.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:16.010Z,1509685036.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:16.071Z,1509685036.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:16.422Z,1509685036.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:16.453Z,1509685036.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:16.825Z,1509685036.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:16.893Z,1509685036.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:17.226Z,1509685037.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:17.298Z,1509685037.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:17.609Z,1509685037.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:17.625Z,1509685037.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:18.009Z,1509685038.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:18.025Z,1509685038.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:18.409Z,1509685038.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:18.424Z,1509685038.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:18.812Z,1509685038.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:18.827Z,1509685038.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:19.211Z,1509685039.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:19.226Z,1509685039.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:19.617Z,1509685039.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:19.652Z,1509685039.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:20.021Z,1509685040.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:20.053Z,1509685040.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:20.421Z,1509685040.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:20.453Z,1509685040.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:20.805Z,1509685040.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:20.819Z,1509685040.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:21.209Z,1509685041.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:21.223Z,1509685041.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:21.613Z,1509685041.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:21.627Z,1509685041.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:22.006Z,1509685042.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:22.023Z,1509685042.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:22.422Z,1509685042.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:22.453Z,1509685042.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:22.821Z,1509685042.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:22.858Z,1509685042.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:23.221Z,1509685043.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:23.254Z,1509685043.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:23.608Z,1509685043.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:23.627Z,1509685043.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:24.008Z,1509685044.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:24.022Z,1509685044.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:24.408Z,1509685044.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:24.423Z,1509685044.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:24.809Z,1509685044.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:24.824Z,1509685044.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:25.208Z,1509685045.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:25.222Z,1509685045.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:25.614Z,1509685045.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:25.629Z,1509685045.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:26.022Z,1509685046.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:26.053Z,1509685046.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:26.413Z,1509685046.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:26.434Z,1509685046.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:26.812Z,1509685046.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:26.827Z,1509685046.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:27.212Z,1509685047.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:27.227Z,1509685047.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:27.613Z,1509685047.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:27.627Z,1509685047.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:28.012Z,1509685048.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:28.027Z,1509685048.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:28.425Z,1509685048.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:28.457Z,1509685048.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:28.825Z,1509685048.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:28.840Z,1509685048.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:29.214Z,1509685049.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:29.231Z,1509685049.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:29.610Z,1509685049.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:29.686Z,1509685049.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:30.015Z,1509685050.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:30.029Z,1509685050.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:30.414Z,1509685050.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:30.470Z,1509685050.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:30.814Z,1509685050.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:30.835Z,1509685050.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:31.214Z,1509685051.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:31.269Z,1509685051.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:31.618Z,1509685051.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:31.667Z,1509685051.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:32.021Z,1509685052.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:32.036Z,1509685052.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:32.417Z,1509685052.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:32.438Z,1509685052.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:32.814Z,1509685052.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:32.829Z,1509685052.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:33.210Z,1509685053.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:33.225Z,1509685053.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:33.616Z,1509685053.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:33.630Z,1509685053.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:34.015Z,1509685054.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:34.035Z,1509685054.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:34.420Z,1509685054.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:34.435Z,1509685054.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:34.820Z,1509685054.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:34.842Z,1509685054.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:35.220Z,1509685055.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:35.235Z,1509685055.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:35.614Z,1509685055.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:35.635Z,1509685055.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:36.015Z,1509685056.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:36.030Z,1509685056.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:36.408Z,1509685056.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:36.423Z,1509685056.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:36.813Z,1509685056.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:36.828Z,1509685056.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:37.215Z,1509685057.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:37.229Z,1509685057.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:37.620Z,1509685057.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:37.635Z,1509685057.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:38.020Z,1509685058.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:38.043Z,1509685058.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:38.421Z,1509685058.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:38.442Z,1509685058.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:38.815Z,1509685058.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:38.835Z,1509685058.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:39.212Z,1509685059.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:39.227Z,1509685059.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:39.614Z,1509685059.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:39.629Z,1509685059.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:40.014Z,1509685060.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:40.035Z,1509685060.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:40.424Z,1509685060.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:40.440Z,1509685060.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:40.824Z,1509685060.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:40.846Z,1509685060.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:41.224Z,1509685061.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:41.247Z,1509685061.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:41.612Z,1509685061.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:41.627Z,1509685061.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:42.013Z,1509685062.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:42.028Z,1509685062.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:42.415Z,1509685062.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:42.430Z,1509685062.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:42.814Z,1509685062.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:42.829Z,1509685062.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:43.216Z,1509685063.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:43.230Z,1509685063.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:43.624Z,1509685063.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:43.707Z,1509685063.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:44.023Z,1509685064.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:44.043Z,1509685064.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:44.425Z,1509685064.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:44.474Z,1509685064.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:44.802Z,1509685064.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:44.838Z,1509685064.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:45.204Z,1509685065.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:45.270Z,1509685065.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:45.601Z,1509685065.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:45.647Z,1509685065.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:46.007Z,1509685066.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:46.033Z,1509685066.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:46.425Z,1509685066.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:46.440Z,1509685066.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:46.829Z,1509685066.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:46.850Z,1509685066.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:47.230Z,1509685067.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:47.245Z,1509685067.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:47.605Z,1509685067.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:47.634Z,1509685067.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:48.000Z,1509685068.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:48.027Z,1509685068.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:48.401Z,1509685068.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:48.416Z,1509685068.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:48.806Z,1509685068.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:48.841Z,1509685068.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:49.204Z,1509685069.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:49.219Z,1509685069.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:49.617Z,1509685069.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:49.643Z,1509685069.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:50.017Z,1509685070.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:50.044Z,1509685070.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:50.416Z,1509685070.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:50.446Z,1509685070.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:50.805Z,1509685070.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:50.820Z,1509685070.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:51.208Z,1509685071.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:51.243Z,1509685071.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:51.609Z,1509685071.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:51.624Z,1509685071.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:52.008Z,1509685072.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:52.027Z,1509685072.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:52.421Z,1509685072.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:52.453Z,1509685072.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:52.821Z,1509685072.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:52.853Z,1509685072.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:53.222Z,1509685073.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:53.251Z,1509685073.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:53.609Z,1509685073.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:53.624Z,1509685073.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:54.009Z,1509685074.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:54.024Z,1509685074.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:54.410Z,1509685074.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:54.426Z,1509685074.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:54.810Z,1509685074.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:54.826Z,1509685074.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:55.213Z,1509685075.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:55.231Z,1509685075.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:55.591Z,1509685075.591 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T04:57:55.591Z,1509685075.591 [NAL9602] Data Fault, FailCount= 1
2017-11-03T04:57:55.591Z,1509685075.591 [NAL9602](ERROR): Data Fault
2017-11-03T04:57:55.609Z,1509685075.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:55.624Z,1509685075.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:55.721Z,1509685075.721 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T04:57:55.991Z,1509685075.991 [NAL9602](INFO): Powering down
2017-11-03T04:57:56.011Z,1509685076.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:56.026Z,1509685076.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:56.412Z,1509685076.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:56.427Z,1509685076.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:59.503Z,1509685079.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:59.582Z,1509685079.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:57:59.680Z,1509685079.680 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T04:57:59.680Z,1509685079.680 [NAL9602] No Fault, FailCount= 1
2017-11-03T04:57:59.731Z,1509685079.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:57:59.754Z,1509685079.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:00.120Z,1509685080.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:00.135Z,1509685080.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:00.524Z,1509685080.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:00.583Z,1509685080.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:00.921Z,1509685080.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:00.942Z,1509685080.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:01.320Z,1509685081.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:01.364Z,1509685081.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:01.721Z,1509685081.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:01.774Z,1509685081.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:02.121Z,1509685082.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:02.136Z,1509685082.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:02.521Z,1509685082.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:02.542Z,1509685082.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:02.922Z,1509685082.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:02.937Z,1509685082.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:03.322Z,1509685083.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:03.337Z,1509685083.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:03.721Z,1509685083.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:03.735Z,1509685083.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:04.121Z,1509685084.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:04.137Z,1509685084.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:04.521Z,1509685084.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:04.537Z,1509685084.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:04.921Z,1509685084.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:04.935Z,1509685084.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:05.322Z,1509685085.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:05.338Z,1509685085.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:05.722Z,1509685085.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:05.743Z,1509685085.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:06.121Z,1509685086.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:06.136Z,1509685086.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:06.521Z,1509685086.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:06.537Z,1509685086.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:06.922Z,1509685086.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:06.937Z,1509685086.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:07.321Z,1509685087.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:07.336Z,1509685087.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:07.721Z,1509685087.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:07.736Z,1509685087.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:08.121Z,1509685088.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:08.136Z,1509685088.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:08.522Z,1509685088.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:08.537Z,1509685088.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:08.921Z,1509685088.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:08.937Z,1509685088.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:09.320Z,1509685089.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:09.335Z,1509685089.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:09.720Z,1509685089.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:09.736Z,1509685089.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:10.120Z,1509685090.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:10.136Z,1509685090.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:10.520Z,1509685090.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:10.535Z,1509685090.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:10.921Z,1509685090.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:10.936Z,1509685090.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:11.320Z,1509685091.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:11.335Z,1509685091.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:11.720Z,1509685091.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:11.735Z,1509685091.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:12.121Z,1509685092.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:12.135Z,1509685092.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:12.520Z,1509685092.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:12.535Z,1509685092.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:12.920Z,1509685092.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:12.935Z,1509685092.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:13.320Z,1509685093.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:13.335Z,1509685093.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:13.720Z,1509685093.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:13.810Z,1509685093.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:14.120Z,1509685094.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:14.134Z,1509685094.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:14.520Z,1509685094.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:14.567Z,1509685094.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:14.920Z,1509685094.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:14.935Z,1509685094.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:15.320Z,1509685095.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:15.366Z,1509685095.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:15.720Z,1509685095.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:15.735Z,1509685095.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:16.120Z,1509685096.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:16.175Z,1509685096.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:16.520Z,1509685096.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:16.535Z,1509685096.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:16.920Z,1509685096.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:16.935Z,1509685096.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:17.320Z,1509685097.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:17.335Z,1509685097.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:17.720Z,1509685097.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:17.734Z,1509685097.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:18.120Z,1509685098.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:18.135Z,1509685098.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:18.520Z,1509685098.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:18.535Z,1509685098.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:18.920Z,1509685098.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:18.934Z,1509685098.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:19.320Z,1509685099.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:19.335Z,1509685099.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:19.720Z,1509685099.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:19.735Z,1509685099.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:20.120Z,1509685100.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:20.134Z,1509685100.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:20.524Z,1509685100.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:20.544Z,1509685100.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:20.924Z,1509685100.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:20.939Z,1509685100.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:21.324Z,1509685101.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:21.339Z,1509685101.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:21.724Z,1509685101.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:21.739Z,1509685101.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:22.124Z,1509685102.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:22.139Z,1509685102.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:22.524Z,1509685102.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:22.538Z,1509685102.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:22.924Z,1509685102.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:22.939Z,1509685102.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:23.324Z,1509685103.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:23.339Z,1509685103.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:23.724Z,1509685103.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:23.738Z,1509685103.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:24.124Z,1509685104.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:24.139Z,1509685104.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:24.524Z,1509685104.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:24.539Z,1509685104.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:24.924Z,1509685104.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:24.942Z,1509685104.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:25.324Z,1509685105.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:25.339Z,1509685105.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:25.724Z,1509685105.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:25.739Z,1509685105.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:26.107Z,1509685106.107 [NAL9602](INFO): Powering up NAL9602
2017-11-03T04:58:26.125Z,1509685106.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:26.146Z,1509685106.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:26.524Z,1509685106.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:26.547Z,1509685106.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:26.920Z,1509685106.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:26.935Z,1509685106.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:27.324Z,1509685107.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:27.339Z,1509685107.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:27.724Z,1509685107.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:27.794Z,1509685107.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:27.794Z,1509685107.794 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2017-11-03T04:58:27.794Z,1509685107.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T04:58:27.796Z,1509685107.796 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:27.796Z,1509685107.796 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2017-11-03T04:58:27.796Z,1509685107.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T04:58:27.798Z,1509685107.798 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:27.798Z,1509685107.798 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2017-11-03T04:58:27.798Z,1509685107.798 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T04:58:27.925Z,1509685107.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T04:58:27.925Z,1509685107.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T04:58:27.926Z,1509685107.926 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T04:58:28.127Z,1509685108.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:28.268Z,1509685108.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T04:58:28.269Z,1509685108.269 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2017-11-03T04:58:28.269Z,1509685108.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T04:58:28.269Z,1509685108.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2017-11-03T04:58:28.270Z,1509685108.270 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T04:58:28.270Z,1509685108.270 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2017-11-03T04:58:28.523Z,1509685108.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:28.536Z,1509685108.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T04:58:28.537Z,1509685108.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:58:28.537Z,1509685108.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:58:28.537Z,1509685108.537 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T04:58:28.538Z,1509685108.538 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:58:28.538Z,1509685108.538 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:58:28.538Z,1509685108.538 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T04:58:28.539Z,1509685108.539 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T04:58:28.539Z,1509685108.539 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T04:58:28.931Z,1509685108.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:28.950Z,1509685108.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T04:58:28.951Z,1509685108.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:29.317Z,1509685109.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:29.380Z,1509685109.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T04:58:29.381Z,1509685109.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:29.716Z,1509685109.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:29.741Z,1509685109.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-03T04:58:29.742Z,1509685109.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:30.117Z,1509685110.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:30.181Z,1509685110.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T04:58:30.182Z,1509685110.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:30.512Z,1509685110.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:30.576Z,1509685110.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T04:58:30.577Z,1509685110.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:30.916Z,1509685110.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:30.941Z,1509685110.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-11-03T04:58:30.942Z,1509685110.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:31.319Z,1509685111.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:31.345Z,1509685111.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T04:58:31.346Z,1509685111.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:31.719Z,1509685111.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:31.745Z,1509685111.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T04:58:31.746Z,1509685111.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:32.119Z,1509685112.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:32.144Z,1509685112.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T04:58:32.145Z,1509685112.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:32.517Z,1509685112.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:32.543Z,1509685112.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T04:58:32.543Z,1509685112.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:32.914Z,1509685112.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:32.946Z,1509685112.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T04:58:32.947Z,1509685112.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:33.319Z,1509685113.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:33.344Z,1509685113.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T04:58:33.345Z,1509685113.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:33.719Z,1509685113.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:33.745Z,1509685113.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T04:58:33.746Z,1509685113.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:34.116Z,1509685114.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:34.142Z,1509685114.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T04:58:34.143Z,1509685114.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:34.519Z,1509685114.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:34.543Z,1509685114.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-03T04:58:34.544Z,1509685114.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:34.919Z,1509685114.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:34.945Z,1509685114.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T04:58:34.946Z,1509685114.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:35.319Z,1509685115.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:35.345Z,1509685115.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T04:58:35.346Z,1509685115.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:35.712Z,1509685115.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:35.741Z,1509685115.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-03T04:58:35.742Z,1509685115.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:36.119Z,1509685116.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:36.145Z,1509685116.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T04:58:36.146Z,1509685116.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:36.519Z,1509685116.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:36.545Z,1509685116.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T04:58:36.546Z,1509685116.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:36.938Z,1509685116.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:36.952Z,1509685116.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T04:58:36.953Z,1509685116.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:37.302Z,1509685117.302 [NAL9602](INFO): NAL9602 initialized
2017-11-03T04:58:37.320Z,1509685117.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:37.349Z,1509685117.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T04:58:37.350Z,1509685117.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:37.719Z,1509685117.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:37.745Z,1509685117.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T04:58:37.746Z,1509685117.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:38.130Z,1509685118.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:38.162Z,1509685118.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T04:58:38.163Z,1509685118.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:38.530Z,1509685118.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:38.556Z,1509685118.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T04:58:38.557Z,1509685118.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:38.934Z,1509685118.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:38.959Z,1509685118.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T04:58:38.960Z,1509685118.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:39.320Z,1509685119.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:39.334Z,1509685119.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T04:58:39.335Z,1509685119.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:39.718Z,1509685119.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:39.733Z,1509685119.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-03T04:58:39.734Z,1509685119.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:40.117Z,1509685120.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:40.132Z,1509685120.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-03T04:58:40.133Z,1509685120.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:40.521Z,1509685120.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:40.535Z,1509685120.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-03T04:58:40.537Z,1509685120.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:40.938Z,1509685120.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:40.966Z,1509685120.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T04:58:40.967Z,1509685120.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:41.330Z,1509685121.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:41.361Z,1509685121.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T04:58:41.362Z,1509685121.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:41.737Z,1509685121.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:41.766Z,1509685121.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T04:58:41.767Z,1509685121.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:42.124Z,1509685122.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:42.138Z,1509685122.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-03T04:58:42.139Z,1509685122.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:42.521Z,1509685122.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:42.566Z,1509685122.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T04:58:42.567Z,1509685122.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:42.924Z,1509685122.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:42.938Z,1509685122.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T04:58:42.939Z,1509685122.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:43.317Z,1509685123.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:43.338Z,1509685123.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T04:58:43.339Z,1509685123.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:43.734Z,1509685123.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:43.764Z,1509685123.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T04:58:43.765Z,1509685123.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:44.134Z,1509685124.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:44.166Z,1509685124.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T04:58:44.167Z,1509685124.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:44.538Z,1509685124.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:44.562Z,1509685124.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T04:58:44.563Z,1509685124.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:44.924Z,1509685124.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:44.939Z,1509685124.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T04:58:44.940Z,1509685124.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:45.323Z,1509685125.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:45.337Z,1509685125.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T04:58:45.338Z,1509685125.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:45.722Z,1509685125.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:45.730Z,1509685125.730 [BPC1](ERROR): Failed to receive battery data
2017-11-03T04:58:45.730Z,1509685125.730 [BPC1] Communications Fault, FailCount= 1
2017-11-03T04:58:45.730Z,1509685125.730 [BPC1](ERROR): Communications Fault
2017-11-03T04:58:45.738Z,1509685125.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T04:58:45.739Z,1509685125.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:45.841Z,1509685125.841 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T04:58:46.122Z,1509685126.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:46.137Z,1509685126.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-03T04:58:46.138Z,1509685126.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:46.521Z,1509685126.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:46.536Z,1509685126.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-03T04:58:46.537Z,1509685126.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:46.935Z,1509685126.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:46.965Z,1509685126.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T04:58:46.966Z,1509685126.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:47.061Z,1509685127.061 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T04:58:47.061Z,1509685127.061 [BPC1] No Fault, FailCount= 1
2017-11-03T04:58:47.334Z,1509685127.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:47.417Z,1509685127.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T04:58:47.418Z,1509685127.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:47.734Z,1509685127.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:47.768Z,1509685127.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T04:58:47.769Z,1509685127.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:48.121Z,1509685128.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:48.137Z,1509685128.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:48.519Z,1509685128.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:48.539Z,1509685128.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:48.921Z,1509685128.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:48.935Z,1509685128.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:49.321Z,1509685129.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:49.336Z,1509685129.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:49.734Z,1509685129.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:49.766Z,1509685129.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:50.137Z,1509685130.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:50.173Z,1509685130.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:50.538Z,1509685130.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:50.571Z,1509685130.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:50.924Z,1509685130.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:50.940Z,1509685130.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:51.319Z,1509685131.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:51.343Z,1509685131.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:51.722Z,1509685131.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:51.782Z,1509685131.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:52.126Z,1509685132.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:52.141Z,1509685132.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:52.528Z,1509685132.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:52.543Z,1509685132.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:52.933Z,1509685132.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:52.948Z,1509685132.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:53.332Z,1509685133.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:53.348Z,1509685133.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:53.734Z,1509685133.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:53.748Z,1509685133.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:54.127Z,1509685134.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:54.142Z,1509685134.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:54.525Z,1509685134.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:54.539Z,1509685134.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:54.929Z,1509685134.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:54.943Z,1509685134.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:55.328Z,1509685135.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:55.343Z,1509685135.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:55.732Z,1509685135.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:55.747Z,1509685135.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:55.841Z,1509685135.841 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T04:58:55.841Z,1509685135.841 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T04:58:56.133Z,1509685136.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:56.148Z,1509685136.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:56.206Z,1509685136.206 [Rowe_600LCM](INFO): Initializing
2017-11-03T04:58:56.208Z,1509685136.208 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T04:58:56.208Z,1509685136.208 [Rowe_600LCM](INFO): LCM OK
2017-11-03T04:58:56.208Z,1509685136.208 [Rowe_600LCM](INFO): Powering up
2017-11-03T04:58:56.534Z,1509685136.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:56.549Z,1509685136.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:59.620Z,1509685139.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:59.636Z,1509685139.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:58:59.639Z,1509685139.639 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T04:53:59.4Z
2017-11-03T04:58:59.640Z,1509685139.640 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T04:58:59.640Z,1509685139.640 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T04:58:59.761Z,1509685139.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:58:59.792Z,1509685139.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:00.301Z,1509685140.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:00.350Z,1509685140.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:00.455Z,1509685140.455 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T04:59:00.531Z,1509685140.531 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T04:59:00.533Z,1509685140.533 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T04:59:00.533Z,1509685140.533 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T04:59:00.534Z,1509685140.534 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T04:59:00.613Z,1509685140.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:00.647Z,1509685140.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:00.991Z,1509685140.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:01.007Z,1509685141.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:01.420Z,1509685141.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:01.509Z,1509685141.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:04.574Z,1509685144.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:04.663Z,1509685144.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:04.781Z,1509685144.781 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0112.lzma
2017-11-03T04:59:04.818Z,1509685144.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:04.854Z,1509685144.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:05.222Z,1509685145.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:05.269Z,1509685145.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:05.579Z,1509685145.579 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0112.lzma.bak
2017-11-03T04:59:05.580Z,1509685145.580 [DataOverHttps](INFO): SBD MOMSN=5182758
2017-11-03T04:59:05.629Z,1509685145.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:05.652Z,1509685145.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:06.250Z,1509685146.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:06.310Z,1509685146.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:06.447Z,1509685146.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:06.494Z,1509685146.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:09.680Z,1509685149.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:09.732Z,1509685149.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:09.931Z,1509685149.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:09.971Z,1509685149.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:10.297Z,1509685150.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:10.312Z,1509685150.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:10.702Z,1509685150.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:10.723Z,1509685150.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:11.101Z,1509685151.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:11.123Z,1509685151.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:11.479Z,1509685151.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:11.505Z,1509685151.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:14.744Z,1509685154.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:14.759Z,1509685154.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:14.847Z,1509685154.847 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20171103T001125/Express0113.lzma
2017-11-03T04:59:14.873Z,1509685154.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:14.906Z,1509685154.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:15.298Z,1509685155.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:15.313Z,1509685155.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:15.651Z,1509685155.651 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0113.lzma.bak
2017-11-03T04:59:15.651Z,1509685155.651 [DataOverHttps](INFO): SBD MOMSN=5182760
2017-11-03T04:59:15.686Z,1509685155.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:15.725Z,1509685155.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:16.358Z,1509685156.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:16.379Z,1509685156.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:16.382Z,1509685156.382 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T04:59:16.382Z,1509685156.382 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T04:59:16.382Z,1509685156.382 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T04:59:16.544Z,1509685156.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T04:59:16.571Z,1509685156.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:19.815Z,1509685159.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:20.014Z,1509685160.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:20.425Z,1509685160.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:20.780Z,1509685160.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:21.177Z,1509685161.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:21.614Z,1509685161.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:22.001Z,1509685162.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:22.411Z,1509685162.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:22.783Z,1509685162.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:23.208Z,1509685163.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:23.611Z,1509685163.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:23.989Z,1509685163.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:24.378Z,1509685164.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:24.779Z,1509685164.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:25.173Z,1509685165.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:25.574Z,1509685165.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:26.030Z,1509685166.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:26.380Z,1509685166.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:26.786Z,1509685166.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:27.175Z,1509685167.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:27.579Z,1509685167.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:27.974Z,1509685167.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:28.376Z,1509685168.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:28.783Z,1509685168.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:29.179Z,1509685169.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:29.583Z,1509685169.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:29.979Z,1509685169.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:30.371Z,1509685170.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:30.787Z,1509685170.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:31.184Z,1509685171.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:31.585Z,1509685171.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:31.991Z,1509685171.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:32.402Z,1509685172.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:32.790Z,1509685172.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:33.163Z,1509685173.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:33.567Z,1509685173.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:34.018Z,1509685174.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:34.363Z,1509685174.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:34.785Z,1509685174.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:35.194Z,1509685175.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:35.611Z,1509685175.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:35.992Z,1509685175.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:36.390Z,1509685176.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:36.807Z,1509685176.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:37.167Z,1509685177.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:37.599Z,1509685177.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:38.042Z,1509685178.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:38.385Z,1509685178.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:38.795Z,1509685178.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:39.187Z,1509685179.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:39.563Z,1509685179.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:40.044Z,1509685180.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:40.386Z,1509685180.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:40.785Z,1509685180.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:41.188Z,1509685181.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:41.585Z,1509685181.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:41.983Z,1509685181.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:42.389Z,1509685182.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:42.767Z,1509685182.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:43.168Z,1509685183.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:43.571Z,1509685183.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:43.989Z,1509685183.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:44.408Z,1509685184.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:44.810Z,1509685184.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:45.170Z,1509685185.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:45.574Z,1509685185.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:45.978Z,1509685185.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:46.375Z,1509685186.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:46.841Z,1509685186.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:47.187Z,1509685187.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:47.585Z,1509685187.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:47.992Z,1509685187.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:48.385Z,1509685188.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:48.803Z,1509685188.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:49.184Z,1509685189.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:49.610Z,1509685189.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:49.995Z,1509685189.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:50.446Z,1509685190.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:50.786Z,1509685190.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:51.199Z,1509685191.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:51.582Z,1509685191.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:52.034Z,1509685192.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:52.403Z,1509685192.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:52.791Z,1509685192.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:53.190Z,1509685193.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:53.597Z,1509685193.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:54.015Z,1509685194.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:54.371Z,1509685194.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:54.779Z,1509685194.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:55.173Z,1509685195.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:55.571Z,1509685195.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:55.983Z,1509685195.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:56.382Z,1509685196.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:56.791Z,1509685196.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:57.179Z,1509685197.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:57.571Z,1509685197.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:57.968Z,1509685197.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:58.375Z,1509685198.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:58.781Z,1509685198.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:59.190Z,1509685199.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:59.591Z,1509685199.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T04:59:59.972Z,1509685199.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:00.374Z,1509685200.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:00.790Z,1509685200.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:01.163Z,1509685201.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:01.564Z,1509685201.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:01.995Z,1509685201.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:02.395Z,1509685202.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:02.792Z,1509685202.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:03.214Z,1509685203.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:03.571Z,1509685203.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:03.976Z,1509685203.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:04.421Z,1509685204.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:04.780Z,1509685204.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:05.179Z,1509685205.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:05.618Z,1509685205.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:06.025Z,1509685206.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:06.407Z,1509685206.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:06.803Z,1509685206.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:07.167Z,1509685207.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:07.570Z,1509685207.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:08.049Z,1509685208.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:08.396Z,1509685208.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:08.780Z,1509685208.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:09.171Z,1509685209.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:09.566Z,1509685209.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:09.967Z,1509685209.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:10.375Z,1509685210.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:10.780Z,1509685210.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:11.179Z,1509685211.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:11.580Z,1509685211.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:11.966Z,1509685211.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:12.367Z,1509685212.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:12.776Z,1509685212.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:13.183Z,1509685213.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:13.577Z,1509685213.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:13.984Z,1509685213.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:14.387Z,1509685214.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:14.785Z,1509685214.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:15.179Z,1509685215.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:15.586Z,1509685215.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:15.985Z,1509685215.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:16.390Z,1509685216.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:16.789Z,1509685216.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:20.123Z,1509685220.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:20.265Z,1509685220.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:20.695Z,1509685220.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:21.045Z,1509685221.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:21.059Z,1509685221.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:21.444Z,1509685221.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:21.495Z,1509685221.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:21.858Z,1509685221.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:21.958Z,1509685221.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:22.261Z,1509685222.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:22.292Z,1509685222.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:22.654Z,1509685222.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:22.669Z,1509685222.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:23.046Z,1509685223.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:23.061Z,1509685223.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:23.448Z,1509685223.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:23.463Z,1509685223.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:23.845Z,1509685223.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:23.860Z,1509685223.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:24.248Z,1509685224.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:24.263Z,1509685224.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:24.648Z,1509685224.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:24.671Z,1509685224.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:25.058Z,1509685225.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:25.073Z,1509685225.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:25.459Z,1509685225.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:25.479Z,1509685225.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:25.860Z,1509685225.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:25.875Z,1509685225.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:26.247Z,1509685226.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:26.262Z,1509685226.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:26.651Z,1509685226.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:26.666Z,1509685226.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:27.053Z,1509685227.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:27.068Z,1509685227.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:27.451Z,1509685227.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:27.466Z,1509685227.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:27.860Z,1509685227.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:27.883Z,1509685227.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:28.260Z,1509685228.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:28.282Z,1509685228.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:28.660Z,1509685228.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:28.679Z,1509685228.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:29.049Z,1509685229.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:29.064Z,1509685229.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:29.449Z,1509685229.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:29.463Z,1509685229.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:29.868Z,1509685229.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:29.933Z,1509685229.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:30.250Z,1509685230.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:30.265Z,1509685230.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:30.656Z,1509685230.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:30.671Z,1509685230.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:31.060Z,1509685231.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:31.075Z,1509685231.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:31.460Z,1509685231.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:31.475Z,1509685231.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:31.874Z,1509685231.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:31.932Z,1509685231.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:32.237Z,1509685232.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:32.267Z,1509685232.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:32.640Z,1509685232.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:32.691Z,1509685232.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:33.044Z,1509685233.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:33.069Z,1509685233.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:33.443Z,1509685233.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:33.469Z,1509685233.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:33.864Z,1509685233.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:33.939Z,1509685233.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:34.265Z,1509685234.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:34.280Z,1509685234.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:34.661Z,1509685234.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:34.676Z,1509685234.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:35.040Z,1509685235.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:35.066Z,1509685235.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:35.443Z,1509685235.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:35.468Z,1509685235.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:35.843Z,1509685235.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:35.869Z,1509685235.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:36.242Z,1509685236.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:36.267Z,1509685236.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:36.649Z,1509685236.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:36.664Z,1509685236.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:37.060Z,1509685237.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:37.069Z,1509685237.069 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:00:37.069Z,1509685237.069 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:00:37.069Z,1509685237.069 [BPC1](ERROR): Communications Fault
2017-11-03T05:00:37.083Z,1509685237.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:37.181Z,1509685237.181 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:00:37.464Z,1509685237.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:37.479Z,1509685237.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:37.864Z,1509685237.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:37.879Z,1509685237.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:38.239Z,1509685238.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:38.265Z,1509685238.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:38.349Z,1509685238.349 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:00:38.349Z,1509685238.349 [BPC1] No Fault, FailCount= 1
2017-11-03T05:00:38.651Z,1509685238.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:38.723Z,1509685238.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:39.050Z,1509685239.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:39.064Z,1509685239.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:39.451Z,1509685239.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:39.466Z,1509685239.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:39.861Z,1509685239.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:39.876Z,1509685239.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:40.262Z,1509685240.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:40.277Z,1509685240.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:40.661Z,1509685240.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:40.676Z,1509685240.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:41.049Z,1509685241.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:41.067Z,1509685241.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:41.449Z,1509685241.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:41.470Z,1509685241.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:41.851Z,1509685241.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:41.866Z,1509685241.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:42.249Z,1509685242.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:42.264Z,1509685242.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:42.639Z,1509685242.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:42.705Z,1509685242.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:43.061Z,1509685243.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:43.075Z,1509685243.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:43.464Z,1509685243.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:43.483Z,1509685243.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:43.915Z,1509685243.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:43.963Z,1509685243.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:44.251Z,1509685244.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:44.266Z,1509685244.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:44.651Z,1509685244.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:44.671Z,1509685244.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:45.051Z,1509685245.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:45.066Z,1509685245.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:45.451Z,1509685245.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:45.471Z,1509685245.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:45.870Z,1509685245.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:45.927Z,1509685245.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:46.262Z,1509685246.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:46.289Z,1509685246.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:46.662Z,1509685246.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:46.677Z,1509685246.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:47.040Z,1509685247.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:47.066Z,1509685247.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:47.443Z,1509685247.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:47.469Z,1509685247.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:47.837Z,1509685247.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:47.902Z,1509685247.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:48.242Z,1509685248.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:48.267Z,1509685248.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:48.647Z,1509685248.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:48.693Z,1509685248.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:49.063Z,1509685249.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:49.083Z,1509685249.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:49.458Z,1509685249.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:49.476Z,1509685249.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:49.859Z,1509685249.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:49.874Z,1509685249.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:50.241Z,1509685250.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:50.273Z,1509685250.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:50.651Z,1509685250.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:50.671Z,1509685250.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:51.053Z,1509685251.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:51.068Z,1509685251.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:51.452Z,1509685251.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:51.479Z,1509685251.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:51.875Z,1509685251.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:51.906Z,1509685251.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:52.257Z,1509685252.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:52.273Z,1509685252.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:52.662Z,1509685252.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:52.705Z,1509685252.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:53.041Z,1509685253.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:53.087Z,1509685253.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:53.439Z,1509685253.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:53.543Z,1509685253.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:53.844Z,1509685253.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:53.906Z,1509685253.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:54.250Z,1509685254.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:54.319Z,1509685254.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:54.649Z,1509685254.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:54.702Z,1509685254.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:55.054Z,1509685255.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:55.123Z,1509685255.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:55.465Z,1509685255.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:00:55.515Z,1509685255.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:55.951Z,1509685255.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:56.294Z,1509685256.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:56.500Z,1509685256.500 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:00:56.500Z,1509685256.500 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T05:00:56.500Z,1509685256.500 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:00:56.667Z,1509685256.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:00:56.668Z,1509685256.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:56.784Z,1509685256.784 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:00:56.905Z,1509685256.905 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:00:57.144Z,1509685257.144 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:00:57.160Z,1509685257.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T05:00:57.165Z,1509685257.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:57.479Z,1509685257.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:00:57.480Z,1509685257.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:57.900Z,1509685257.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:00:57.911Z,1509685257.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:58.300Z,1509685258.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:00:58.301Z,1509685258.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:58.429Z,1509685258.429 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:00:58.429Z,1509685258.429 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T05:00:58.679Z,1509685258.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:00:58.680Z,1509685258.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:58.761Z,1509685258.761 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:00:58.761Z,1509685258.761 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:00:58.761Z,1509685258.761 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:00:58.761Z,1509685258.761 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:00:59.110Z,1509685259.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:00:59.111Z,1509685259.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:59.514Z,1509685259.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:00:59.515Z,1509685259.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:00:59.876Z,1509685259.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:00:59.881Z,1509685259.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:00.272Z,1509685260.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:01:00.273Z,1509685260.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:00.678Z,1509685260.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:01:00.679Z,1509685260.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:01.087Z,1509685261.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:01:01.088Z,1509685261.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:01.491Z,1509685261.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:01:01.492Z,1509685261.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:01.878Z,1509685261.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:01:01.879Z,1509685261.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:02.276Z,1509685262.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:01:02.281Z,1509685262.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:02.679Z,1509685262.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:01:02.680Z,1509685262.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:02.968Z,1509685262.968 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:01:03.103Z,1509685263.103 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:01:03.112Z,1509685263.112 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:01:03.113Z,1509685263.113 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:01:03.114Z,1509685263.114 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:01:03.160Z,1509685263.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T05:01:03.177Z,1509685263.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:03.508Z,1509685263.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:01:03.514Z,1509685263.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:03.895Z,1509685263.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:04.311Z,1509685264.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:04.683Z,1509685264.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:05.075Z,1509685265.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:05.455Z,1509685265.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:05.856Z,1509685265.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:06.306Z,1509685266.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:06.702Z,1509685266.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:07.086Z,1509685267.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:07.503Z,1509685267.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:07.889Z,1509685267.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:08.307Z,1509685268.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:08.707Z,1509685268.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:09.087Z,1509685269.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:09.459Z,1509685269.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:09.889Z,1509685269.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:10.272Z,1509685270.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:10.689Z,1509685270.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:11.063Z,1509685271.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:11.467Z,1509685271.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:11.863Z,1509685271.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:12.259Z,1509685272.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:12.663Z,1509685272.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:13.089Z,1509685273.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:13.488Z,1509685273.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:13.888Z,1509685273.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:14.313Z,1509685274.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:14.663Z,1509685274.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:15.069Z,1509685275.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:15.459Z,1509685275.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:15.888Z,1509685275.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:16.289Z,1509685276.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:16.685Z,1509685276.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:17.067Z,1509685277.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:20.310Z,1509685280.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:20.478Z,1509685280.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:20.868Z,1509685280.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:21.302Z,1509685281.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:21.697Z,1509685281.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:22.099Z,1509685282.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:22.493Z,1509685282.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:22.929Z,1509685282.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:23.263Z,1509685283.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:23.659Z,1509685283.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:24.067Z,1509685284.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:24.471Z,1509685284.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:24.958Z,1509685284.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:25.262Z,1509685285.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:25.662Z,1509685285.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:26.059Z,1509685286.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:26.458Z,1509685286.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:26.925Z,1509685286.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:27.268Z,1509685287.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:27.688Z,1509685287.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:28.075Z,1509685288.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:28.459Z,1509685288.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:28.859Z,1509685288.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:28.859Z,1509685288.859 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2017-11-03T05:01:28.859Z,1509685288.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:01:28.861Z,1509685288.861 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:28.861Z,1509685288.861 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2017-11-03T05:01:28.861Z,1509685288.861 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:01:28.863Z,1509685288.863 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:28.863Z,1509685288.863 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96
2017-11-03T05:01:28.863Z,1509685288.863 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:01:28.970Z,1509685288.970 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:01:28.970Z,1509685288.970 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:01:28.971Z,1509685288.971 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:01:29.340Z,1509685289.340 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:01:29.341Z,1509685289.341 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2017-11-03T05:01:29.341Z,1509685289.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:01:29.341Z,1509685289.341 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2017-11-03T05:01:29.342Z,1509685289.342 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:01:29.342Z,1509685289.342 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96
2017-11-03T05:01:29.660Z,1509685289.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:01:29.661Z,1509685289.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:01:29.661Z,1509685289.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:01:29.662Z,1509685289.662 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:01:29.663Z,1509685289.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:01:29.663Z,1509685289.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:01:29.664Z,1509685289.664 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:01:29.665Z,1509685289.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:01:29.665Z,1509685289.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:01:30.067Z,1509685290.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:30.475Z,1509685290.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:30.877Z,1509685290.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:31.269Z,1509685291.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:31.664Z,1509685291.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:32.058Z,1509685292.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:32.457Z,1509685292.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:32.873Z,1509685292.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:33.325Z,1509685293.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:33.653Z,1509685293.653 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T05:01:33.654Z,1509685293.654 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:01:33.654Z,1509685293.654 [BPC1](ERROR): Data Fault
2017-11-03T05:01:33.662Z,1509685293.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:33.757Z,1509685293.757 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:01:34.069Z,1509685294.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:34.467Z,1509685294.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:34.856Z,1509685294.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:34.945Z,1509685294.945 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:01:34.945Z,1509685294.945 [BPC1] No Fault, FailCount= 1
2017-11-03T05:01:35.315Z,1509685295.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:35.656Z,1509685295.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:36.099Z,1509685296.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:36.471Z,1509685296.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:36.946Z,1509685296.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:37.326Z,1509685297.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:37.676Z,1509685297.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:38.051Z,1509685298.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:38.450Z,1509685298.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:38.927Z,1509685298.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:39.274Z,1509685299.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:39.682Z,1509685299.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:40.058Z,1509685300.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:40.461Z,1509685300.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:40.894Z,1509685300.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:41.248Z,1509685301.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:41.669Z,1509685301.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:42.079Z,1509685302.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:42.478Z,1509685302.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:42.879Z,1509685302.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:43.314Z,1509685303.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:43.655Z,1509685303.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:44.068Z,1509685304.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:44.463Z,1509685304.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:44.870Z,1509685304.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:45.289Z,1509685305.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:45.669Z,1509685305.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:46.059Z,1509685306.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:46.141Z,1509685306.141 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T05:01:46.502Z,1509685306.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:46.859Z,1509685306.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:47.261Z,1509685307.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:47.661Z,1509685307.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:48.118Z,1509685308.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:48.477Z,1509685308.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:48.915Z,1509685308.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:49.274Z,1509685309.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:49.697Z,1509685309.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:50.093Z,1509685310.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:50.467Z,1509685310.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:50.953Z,1509685310.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:51.293Z,1509685311.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:51.678Z,1509685311.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:52.068Z,1509685312.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:52.452Z,1509685312.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:52.926Z,1509685312.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:53.257Z,1509685313.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:53.660Z,1509685313.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:54.074Z,1509685314.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:54.475Z,1509685314.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:54.930Z,1509685314.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:55.256Z,1509685315.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:55.659Z,1509685315.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:56.050Z,1509685316.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:56.475Z,1509685316.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:56.872Z,1509685316.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:57.278Z,1509685317.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:57.668Z,1509685317.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:58.060Z,1509685318.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:58.465Z,1509685318.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:58.861Z,1509685318.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:59.260Z,1509685319.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:01:59.659Z,1509685319.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:00.073Z,1509685320.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:00.521Z,1509685320.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:00.884Z,1509685320.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:01.260Z,1509685321.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:01.702Z,1509685321.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:02.059Z,1509685322.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:02.502Z,1509685322.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:02.874Z,1509685322.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:03.301Z,1509685323.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:03.701Z,1509685323.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:04.083Z,1509685324.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:04.458Z,1509685324.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:04.932Z,1509685324.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:05.282Z,1509685325.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:05.645Z,1509685325.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:06.079Z,1509685326.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:06.479Z,1509685326.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:06.924Z,1509685326.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:07.286Z,1509685327.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:07.655Z,1509685327.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:08.046Z,1509685328.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:08.455Z,1509685328.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:08.939Z,1509685328.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:09.255Z,1509685329.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:09.685Z,1509685329.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:10.055Z,1509685330.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:10.454Z,1509685330.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:10.854Z,1509685330.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:11.253Z,1509685331.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:11.651Z,1509685331.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:12.060Z,1509685332.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:12.488Z,1509685332.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:12.886Z,1509685332.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:13.292Z,1509685333.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:13.656Z,1509685333.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:14.054Z,1509685334.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:14.457Z,1509685334.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:14.905Z,1509685334.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:15.267Z,1509685335.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:15.660Z,1509685335.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:16.106Z,1509685336.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:16.451Z,1509685336.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:16.857Z,1509685336.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:17.294Z,1509685337.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:20.455Z,1509685340.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:20.655Z,1509685340.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:21.067Z,1509685341.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:21.439Z,1509685341.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:21.815Z,1509685341.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:22.212Z,1509685342.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:22.609Z,1509685342.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:23.047Z,1509685343.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:23.436Z,1509685343.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:23.816Z,1509685343.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:24.212Z,1509685344.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:24.608Z,1509685344.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:25.059Z,1509685345.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:25.415Z,1509685345.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:25.837Z,1509685345.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:26.215Z,1509685346.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:26.616Z,1509685346.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:27.011Z,1509685347.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:27.410Z,1509685347.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:27.815Z,1509685347.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:28.211Z,1509685348.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:28.610Z,1509685348.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:29.037Z,1509685349.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:29.470Z,1509685349.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:29.839Z,1509685349.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:30.211Z,1509685350.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:30.610Z,1509685350.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:31.011Z,1509685351.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:31.470Z,1509685351.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:31.858Z,1509685351.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:32.235Z,1509685352.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:32.638Z,1509685352.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:33.058Z,1509685353.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:33.410Z,1509685353.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:33.811Z,1509685353.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:34.243Z,1509685354.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:34.610Z,1509685354.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:35.047Z,1509685355.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:35.447Z,1509685355.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:35.817Z,1509685355.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:36.210Z,1509685356.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:36.611Z,1509685356.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:37.015Z,1509685357.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:37.414Z,1509685357.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:37.823Z,1509685357.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:38.219Z,1509685358.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:38.616Z,1509685358.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:39.047Z,1509685359.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:39.416Z,1509685359.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:39.813Z,1509685359.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:40.213Z,1509685360.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:40.609Z,1509685360.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:41.020Z,1509685361.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:41.431Z,1509685361.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:41.821Z,1509685361.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:42.214Z,1509685362.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:42.617Z,1509685362.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:43.018Z,1509685363.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:43.493Z,1509685363.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:43.827Z,1509685363.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:44.231Z,1509685364.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:44.631Z,1509685364.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:45.021Z,1509685365.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:45.490Z,1509685365.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:45.811Z,1509685365.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:46.254Z,1509685366.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:46.609Z,1509685366.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:47.036Z,1509685367.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:47.455Z,1509685367.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:47.830Z,1509685367.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:48.231Z,1509685368.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:48.639Z,1509685368.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:49.035Z,1509685369.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:49.443Z,1509685369.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:49.838Z,1509685369.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:50.247Z,1509685370.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:50.620Z,1509685370.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:51.019Z,1509685371.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:51.411Z,1509685371.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:51.815Z,1509685371.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:52.212Z,1509685372.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:52.610Z,1509685372.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:53.042Z,1509685373.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:53.417Z,1509685373.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:53.837Z,1509685373.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:54.219Z,1509685374.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:54.611Z,1509685374.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:55.012Z,1509685375.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:55.411Z,1509685375.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:55.837Z,1509685375.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:56.239Z,1509685376.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:56.637Z,1509685376.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:57.011Z,1509685377.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:57.470Z,1509685377.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:57.811Z,1509685377.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:58.215Z,1509685378.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:58.611Z,1509685378.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:59.038Z,1509685379.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:59.092Z,1509685379.092 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:02:59.093Z,1509685379.093 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T05:02:59.093Z,1509685379.093 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:02:59.140Z,1509685379.140 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:02:59.467Z,1509685379.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:02:59.468Z,1509685379.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:02:59.497Z,1509685379.497 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:02:59.648Z,1509685379.648 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:02:59.857Z,1509685379.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:02:59.858Z,1509685379.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:00.213Z,1509685380.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:03:00.214Z,1509685380.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:00.613Z,1509685380.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:03:00.613Z,1509685380.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:01.045Z,1509685381.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:03:01.046Z,1509685381.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:01.144Z,1509685381.144 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:03:01.145Z,1509685381.145 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T05:03:01.265Z,1509685381.265 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:03:01.265Z,1509685381.265 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:03:01.265Z,1509685381.265 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:03:01.265Z,1509685381.265 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:03:01.420Z,1509685381.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:03:01.421Z,1509685381.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:01.825Z,1509685381.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:03:01.826Z,1509685381.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:02.247Z,1509685382.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:03:02.248Z,1509685382.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:02.628Z,1509685382.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:03:02.629Z,1509685382.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:03.020Z,1509685383.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:03:03.025Z,1509685383.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:03.442Z,1509685383.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:03:03.443Z,1509685383.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:03.823Z,1509685383.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:03:03.824Z,1509685383.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:04.242Z,1509685384.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:03:04.243Z,1509685384.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:04.603Z,1509685384.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:03:04.604Z,1509685384.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:05.064Z,1509685385.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:03:05.065Z,1509685385.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:05.444Z,1509685385.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:03:05.449Z,1509685385.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:05.480Z,1509685385.480 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:03:05.608Z,1509685385.608 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:03:05.609Z,1509685385.609 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:03:05.609Z,1509685385.609 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:03:05.610Z,1509685385.610 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:03:05.843Z,1509685385.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:03:05.845Z,1509685385.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:06.211Z,1509685386.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:06.611Z,1509685386.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:07.012Z,1509685387.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:07.411Z,1509685387.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:07.837Z,1509685387.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:08.238Z,1509685388.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:08.636Z,1509685388.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:09.011Z,1509685389.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:09.410Z,1509685389.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:09.854Z,1509685389.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:10.215Z,1509685390.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:10.617Z,1509685390.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:11.015Z,1509685391.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:11.437Z,1509685391.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:11.836Z,1509685391.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:12.215Z,1509685392.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:12.637Z,1509685392.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:13.014Z,1509685393.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:13.411Z,1509685393.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:13.837Z,1509685393.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:14.234Z,1509685394.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:14.637Z,1509685394.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:15.015Z,1509685395.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:15.411Z,1509685395.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:15.811Z,1509685395.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:16.211Z,1509685396.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:16.611Z,1509685396.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:17.055Z,1509685397.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:17.420Z,1509685397.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:20.655Z,1509685400.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:20.823Z,1509685400.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:21.255Z,1509685401.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:21.646Z,1509685401.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:22.007Z,1509685402.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:22.411Z,1509685402.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:22.819Z,1509685402.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:23.218Z,1509685403.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:23.612Z,1509685403.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:24.007Z,1509685404.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:24.400Z,1509685404.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:24.811Z,1509685404.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:25.209Z,1509685405.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:25.605Z,1509685405.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:26.016Z,1509685406.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:26.417Z,1509685406.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:26.812Z,1509685406.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:27.219Z,1509685407.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:27.611Z,1509685407.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:28.015Z,1509685408.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:28.399Z,1509685408.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:28.820Z,1509685408.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:29.209Z,1509685409.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:29.629Z,1509685409.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:30.006Z,1509685410.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:30.407Z,1509685410.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:30.802Z,1509685410.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:31.211Z,1509685411.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:31.603Z,1509685411.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:32.029Z,1509685412.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:32.430Z,1509685412.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:32.829Z,1509685412.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:33.200Z,1509685413.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:33.650Z,1509685413.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:34.055Z,1509685414.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:34.403Z,1509685414.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:34.815Z,1509685414.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:35.279Z,1509685415.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:35.609Z,1509685415.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:36.030Z,1509685416.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:36.435Z,1509685416.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:36.811Z,1509685416.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:37.206Z,1509685417.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:37.603Z,1509685417.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:38.035Z,1509685418.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:38.416Z,1509685418.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:38.809Z,1509685418.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:39.211Z,1509685419.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:39.611Z,1509685419.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:40.006Z,1509685420.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:40.411Z,1509685420.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:40.816Z,1509685420.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:41.234Z,1509685421.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:41.633Z,1509685421.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:42.005Z,1509685422.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:42.404Z,1509685422.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:42.896Z,1509685422.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:43.206Z,1509685423.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:43.611Z,1509685423.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:44.017Z,1509685424.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:44.415Z,1509685424.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:44.815Z,1509685424.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:45.219Z,1509685425.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:45.619Z,1509685425.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:46.015Z,1509685426.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:46.395Z,1509685426.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:46.826Z,1509685426.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:47.213Z,1509685427.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:47.618Z,1509685427.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:47.998Z,1509685427.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:48.455Z,1509685428.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:48.793Z,1509685428.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:49.230Z,1509685429.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:49.670Z,1509685429.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:50.026Z,1509685430.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:50.447Z,1509685430.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:50.843Z,1509685430.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:51.198Z,1509685431.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:51.605Z,1509685431.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:51.999Z,1509685431.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:52.399Z,1509685432.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:52.827Z,1509685432.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:53.225Z,1509685433.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:53.625Z,1509685433.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:53.998Z,1509685433.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:54.399Z,1509685434.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:54.793Z,1509685434.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:55.202Z,1509685435.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:55.603Z,1509685435.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:56.032Z,1509685436.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:56.415Z,1509685436.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:56.804Z,1509685436.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:57.201Z,1509685437.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:57.605Z,1509685437.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:58.006Z,1509685438.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:58.410Z,1509685438.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:58.837Z,1509685438.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:59.217Z,1509685439.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:03:59.678Z,1509685439.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:00.005Z,1509685440.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:00.403Z,1509685440.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:00.806Z,1509685440.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:01.205Z,1509685441.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:01.615Z,1509685441.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:02.015Z,1509685442.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:02.434Z,1509685442.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:02.843Z,1509685442.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:03.286Z,1509685443.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:03.602Z,1509685443.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:03.995Z,1509685443.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:04.426Z,1509685444.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:04.823Z,1509685444.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:05.243Z,1509685445.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:05.654Z,1509685445.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:06.003Z,1509685446.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:06.403Z,1509685446.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:06.802Z,1509685446.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:07.203Z,1509685447.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:07.603Z,1509685447.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:08.027Z,1509685448.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:08.427Z,1509685448.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:08.804Z,1509685448.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:09.201Z,1509685449.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:09.604Z,1509685449.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:10.006Z,1509685450.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:10.404Z,1509685450.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:10.819Z,1509685450.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:11.223Z,1509685451.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:11.615Z,1509685451.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:12.005Z,1509685452.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:12.415Z,1509685452.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:12.804Z,1509685452.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:13.199Z,1509685453.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:13.610Z,1509685453.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:14.020Z,1509685454.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:14.427Z,1509685454.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:14.823Z,1509685454.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:15.222Z,1509685455.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:15.619Z,1509685455.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:16.001Z,1509685456.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:16.402Z,1509685456.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:16.821Z,1509685456.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:16.825Z,1509685456.825 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T05:04:16.825Z,1509685456.825 [Default:CheckIn:C.Wait] Stopped
2017-11-03T05:04:16.825Z,1509685456.825 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T05:04:16.825Z,1509685456.825 [Default:CheckIn:D] Running Loop=1
2017-11-03T05:04:17.241Z,1509685457.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:17.244Z,1509685457.244 [Default:CheckIn:D] Stopped
2017-11-03T05:04:17.244Z,1509685457.244 [Default:CheckIn:E] Running Loop=1
2017-11-03T05:04:17.675Z,1509685457.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:17.682Z,1509685457.682 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 289.161296 min 
2017-11-03T05:04:17.682Z,1509685457.682 [Default:CheckIn:E] Stopped
2017-11-03T05:04:17.683Z,1509685457.683 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T05:04:17.683Z,1509685457.683 [Default:CheckIn] Stopped
2017-11-03T05:04:17.683Z,1509685457.683 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T05:04:17.683Z,1509685457.683 [Default:CheckIn](INFO): Running loop #29
2017-11-03T05:04:17.683Z,1509685457.683 [Default:CheckIn] Running Loop=29
2017-11-03T05:04:17.683Z,1509685457.683 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T05:04:17.683Z,1509685457.683 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T05:04:20.785Z,1509685460.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:20.943Z,1509685460.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:21.382Z,1509685461.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:21.755Z,1509685461.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:22.179Z,1509685462.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:22.573Z,1509685462.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:22.979Z,1509685462.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:23.333Z,1509685463.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:23.745Z,1509685463.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:24.151Z,1509685464.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:24.545Z,1509685464.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:24.982Z,1509685464.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:25.342Z,1509685465.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:25.737Z,1509685465.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:26.137Z,1509685466.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:26.536Z,1509685466.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:26.982Z,1509685466.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:27.348Z,1509685467.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:27.747Z,1509685467.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:28.137Z,1509685468.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:28.539Z,1509685468.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:28.991Z,1509685468.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:29.337Z,1509685469.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:29.753Z,1509685469.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:29.753Z,1509685469.753 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2017-11-03T05:04:29.753Z,1509685469.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:04:29.755Z,1509685469.755 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:29.755Z,1509685469.755 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2017-11-03T05:04:29.755Z,1509685469.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:04:29.757Z,1509685469.757 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:29.757Z,1509685469.757 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97
2017-11-03T05:04:29.757Z,1509685469.757 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:04:29.841Z,1509685469.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:04:29.841Z,1509685469.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:04:29.841Z,1509685469.841 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:04:30.252Z,1509685470.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:04:30.253Z,1509685470.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2017-11-03T05:04:30.253Z,1509685470.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:04:30.253Z,1509685470.253 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2017-11-03T05:04:30.254Z,1509685470.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:04:30.254Z,1509685470.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97
2017-11-03T05:04:30.549Z,1509685470.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:04:30.550Z,1509685470.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:04:30.550Z,1509685470.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:04:30.550Z,1509685470.550 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:04:30.551Z,1509685470.551 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:04:30.551Z,1509685470.551 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:04:30.552Z,1509685470.552 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:04:30.552Z,1509685470.552 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:04:30.553Z,1509685470.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:04:30.945Z,1509685470.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:31.331Z,1509685471.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:31.728Z,1509685471.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:32.129Z,1509685472.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:32.531Z,1509685472.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:32.954Z,1509685472.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:33.355Z,1509685473.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:33.743Z,1509685473.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:34.133Z,1509685474.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:34.583Z,1509685474.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:34.975Z,1509685474.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:35.334Z,1509685475.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:35.787Z,1509685475.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:36.139Z,1509685476.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:36.571Z,1509685476.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:36.985Z,1509685476.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:37.334Z,1509685477.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:37.732Z,1509685477.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:38.135Z,1509685478.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:38.534Z,1509685478.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:38.981Z,1509685478.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:39.339Z,1509685479.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:39.740Z,1509685479.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:40.131Z,1509685480.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:40.534Z,1509685480.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:40.987Z,1509685480.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:41.339Z,1509685481.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:41.739Z,1509685481.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:42.146Z,1509685482.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:42.539Z,1509685482.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:42.984Z,1509685482.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:43.334Z,1509685483.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:43.739Z,1509685483.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:44.139Z,1509685484.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:44.534Z,1509685484.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:44.943Z,1509685484.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:45.343Z,1509685485.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:45.744Z,1509685485.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:46.132Z,1509685486.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:46.539Z,1509685486.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:46.936Z,1509685486.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:47.339Z,1509685487.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:47.740Z,1509685487.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:48.143Z,1509685488.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:48.551Z,1509685488.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:48.985Z,1509685488.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:49.351Z,1509685489.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:49.747Z,1509685489.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:50.142Z,1509685490.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:50.555Z,1509685490.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:50.983Z,1509685490.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:51.367Z,1509685491.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:51.791Z,1509685491.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:52.128Z,1509685492.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:52.527Z,1509685492.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:52.992Z,1509685492.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:53.351Z,1509685493.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:53.748Z,1509685493.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:54.150Z,1509685494.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:54.548Z,1509685494.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:55.001Z,1509685495.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:55.324Z,1509685495.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:55.753Z,1509685495.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:56.128Z,1509685496.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:56.528Z,1509685496.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:57.011Z,1509685497.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:57.355Z,1509685497.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:57.753Z,1509685497.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:58.135Z,1509685498.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:58.535Z,1509685498.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:58.929Z,1509685498.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:59.357Z,1509685499.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:04:59.755Z,1509685499.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:00.158Z,1509685500.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:00.557Z,1509685500.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:00.928Z,1509685500.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:01.330Z,1509685501.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:01.469Z,1509685501.469 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:05:01.469Z,1509685501.469 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T05:05:01.469Z,1509685501.469 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:05:01.761Z,1509685501.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:05:01.762Z,1509685501.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:01.848Z,1509685501.848 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:05:01.872Z,1509685501.872 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:05:01.969Z,1509685501.969 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:05:02.133Z,1509685502.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:05:02.134Z,1509685502.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:02.532Z,1509685502.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:05:02.533Z,1509685502.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:02.954Z,1509685502.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:05:02.955Z,1509685502.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:03.361Z,1509685503.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:05:03.362Z,1509685503.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:03.453Z,1509685503.453 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:05:03.453Z,1509685503.453 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T05:05:03.584Z,1509685503.584 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:05:03.585Z,1509685503.585 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:05:03.585Z,1509685503.585 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:05:03.585Z,1509685503.585 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:05:03.805Z,1509685503.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-03T05:05:03.806Z,1509685503.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:04.136Z,1509685504.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:05:04.137Z,1509685504.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:04.566Z,1509685504.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:05:04.567Z,1509685504.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:04.933Z,1509685504.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:05:04.934Z,1509685504.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:05.370Z,1509685505.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:05:05.371Z,1509685505.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:05.770Z,1509685505.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:05:05.771Z,1509685505.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:06.147Z,1509685506.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:05:06.148Z,1509685506.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:06.541Z,1509685506.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:05:06.542Z,1509685506.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:06.935Z,1509685506.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:05:06.936Z,1509685506.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:07.335Z,1509685507.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:05:07.336Z,1509685507.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:07.765Z,1509685507.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:05:07.766Z,1509685507.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:07.813Z,1509685507.813 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:05:07.891Z,1509685507.891 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:05:07.892Z,1509685507.892 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:05:07.893Z,1509685507.893 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:05:07.893Z,1509685507.893 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:05:08.177Z,1509685508.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:05:08.178Z,1509685508.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:08.541Z,1509685508.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:08.943Z,1509685508.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:09.355Z,1509685509.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:09.746Z,1509685509.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:10.124Z,1509685510.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:10.550Z,1509685510.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:10.947Z,1509685510.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:11.323Z,1509685511.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:11.745Z,1509685511.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:12.151Z,1509685512.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:12.551Z,1509685512.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:12.924Z,1509685512.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:13.349Z,1509685513.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:13.749Z,1509685513.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:14.135Z,1509685514.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:14.535Z,1509685514.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:14.938Z,1509685514.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:15.361Z,1509685515.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:15.763Z,1509685515.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:16.142Z,1509685516.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:16.538Z,1509685516.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:16.932Z,1509685516.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:17.332Z,1509685517.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:17.779Z,1509685517.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:20.979Z,1509685520.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:21.158Z,1509685521.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:21.567Z,1509685521.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:21.936Z,1509685521.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:22.379Z,1509685522.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:22.738Z,1509685522.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:23.175Z,1509685523.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:23.533Z,1509685523.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:23.933Z,1509685523.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:24.332Z,1509685524.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:24.735Z,1509685524.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:25.131Z,1509685525.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:25.528Z,1509685525.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:25.937Z,1509685525.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:26.343Z,1509685526.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:26.735Z,1509685526.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:27.135Z,1509685527.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:27.535Z,1509685527.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:27.975Z,1509685527.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:28.327Z,1509685528.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:28.743Z,1509685528.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:29.139Z,1509685529.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:29.543Z,1509685529.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:29.972Z,1509685529.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:30.323Z,1509685530.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:30.744Z,1509685530.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:31.124Z,1509685531.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:31.550Z,1509685531.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:31.999Z,1509685531.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:32.346Z,1509685532.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:32.754Z,1509685532.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:33.123Z,1509685533.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:33.523Z,1509685533.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:34.013Z,1509685534.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:34.329Z,1509685534.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:34.763Z,1509685534.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:35.178Z,1509685535.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:35.532Z,1509685535.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:35.967Z,1509685535.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:36.334Z,1509685536.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:36.766Z,1509685536.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:37.167Z,1509685537.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:37.539Z,1509685537.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:37.943Z,1509685537.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:38.351Z,1509685538.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:38.742Z,1509685538.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:39.132Z,1509685539.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:39.532Z,1509685539.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:39.935Z,1509685539.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:40.339Z,1509685540.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:40.747Z,1509685540.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:41.148Z,1509685541.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:41.544Z,1509685541.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:41.959Z,1509685541.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:42.333Z,1509685542.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:42.732Z,1509685542.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:43.139Z,1509685543.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:43.532Z,1509685543.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:43.985Z,1509685543.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:44.355Z,1509685544.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:44.750Z,1509685544.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:45.143Z,1509685545.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:45.535Z,1509685545.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:45.982Z,1509685545.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:46.343Z,1509685546.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:46.744Z,1509685546.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:47.154Z,1509685547.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:47.544Z,1509685547.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:47.993Z,1509685547.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:48.340Z,1509685548.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:48.740Z,1509685548.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:49.163Z,1509685549.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:49.543Z,1509685549.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:49.951Z,1509685549.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:50.384Z,1509685550.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:50.750Z,1509685550.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:51.151Z,1509685551.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:51.562Z,1509685551.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:51.923Z,1509685551.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:52.344Z,1509685552.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:52.782Z,1509685552.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:53.165Z,1509685553.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:53.534Z,1509685553.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:53.953Z,1509685553.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:54.328Z,1509685554.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:54.751Z,1509685554.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:55.155Z,1509685555.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:55.590Z,1509685555.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:55.955Z,1509685555.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:56.340Z,1509685556.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:56.744Z,1509685556.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:57.167Z,1509685557.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:57.561Z,1509685557.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:57.974Z,1509685557.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:58.381Z,1509685558.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:58.785Z,1509685558.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:59.147Z,1509685559.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:05:59.549Z,1509685559.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:00.006Z,1509685560.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:00.388Z,1509685560.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:00.757Z,1509685560.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:01.197Z,1509685561.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:01.542Z,1509685561.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:02.025Z,1509685562.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:02.341Z,1509685562.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:02.776Z,1509685562.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:03.152Z,1509685563.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:03.562Z,1509685563.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:03.991Z,1509685563.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:04.347Z,1509685564.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:04.760Z,1509685564.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:05.163Z,1509685565.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:05.551Z,1509685565.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:05.983Z,1509685565.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:06.356Z,1509685566.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:06.749Z,1509685566.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:07.131Z,1509685567.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:07.526Z,1509685567.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:07.927Z,1509685567.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:08.325Z,1509685568.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:08.752Z,1509685568.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:09.152Z,1509685569.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:09.554Z,1509685569.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:09.964Z,1509685569.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:10.327Z,1509685570.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:10.727Z,1509685570.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:11.127Z,1509685571.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:11.525Z,1509685571.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:11.972Z,1509685571.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:12.354Z,1509685572.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:12.732Z,1509685572.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:13.126Z,1509685573.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:13.530Z,1509685573.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:13.975Z,1509685573.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:14.331Z,1509685574.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:14.755Z,1509685574.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:15.153Z,1509685575.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:15.554Z,1509685575.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:15.984Z,1509685575.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:16.330Z,1509685576.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:16.734Z,1509685576.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:17.131Z,1509685577.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:17.535Z,1509685577.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:17.986Z,1509685577.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:21.171Z,1509685581.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:21.355Z,1509685581.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:21.758Z,1509685581.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:22.116Z,1509685582.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:22.558Z,1509685582.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:22.967Z,1509685582.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:23.330Z,1509685583.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:23.735Z,1509685583.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:24.117Z,1509685584.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:24.522Z,1509685584.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:24.923Z,1509685584.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:25.319Z,1509685585.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:25.720Z,1509685585.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:26.127Z,1509685586.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:26.553Z,1509685586.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:26.919Z,1509685586.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:27.319Z,1509685587.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:27.722Z,1509685587.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:28.123Z,1509685588.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:28.506Z,1509685588.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:28.915Z,1509685588.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:29.323Z,1509685589.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:29.721Z,1509685589.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:30.110Z,1509685590.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:30.503Z,1509685590.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:30.907Z,1509685590.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:31.314Z,1509685591.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:31.775Z,1509685591.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:32.172Z,1509685592.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:32.531Z,1509685592.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:32.925Z,1509685592.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:33.326Z,1509685593.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:33.728Z,1509685593.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:34.134Z,1509685594.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:34.555Z,1509685594.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:34.948Z,1509685594.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:35.328Z,1509685595.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:35.759Z,1509685595.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:36.134Z,1509685596.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:36.578Z,1509685596.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:36.947Z,1509685596.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:37.327Z,1509685597.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:37.729Z,1509685597.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:38.120Z,1509685598.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:38.527Z,1509685598.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:38.926Z,1509685598.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:39.325Z,1509685599.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:39.734Z,1509685599.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:40.107Z,1509685600.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:40.505Z,1509685600.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:40.929Z,1509685600.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:41.326Z,1509685601.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:41.727Z,1509685601.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:42.138Z,1509685602.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:42.531Z,1509685602.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:42.907Z,1509685602.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:43.302Z,1509685603.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:43.726Z,1509685603.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:44.135Z,1509685604.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:44.528Z,1509685604.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:44.925Z,1509685604.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:45.329Z,1509685605.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:45.726Z,1509685605.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:46.187Z,1509685606.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:46.535Z,1509685606.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:46.923Z,1509685606.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:47.306Z,1509685607.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:47.730Z,1509685607.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:48.126Z,1509685608.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:48.594Z,1509685608.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:48.911Z,1509685608.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:49.354Z,1509685609.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:49.709Z,1509685609.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:50.111Z,1509685610.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:50.566Z,1509685610.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:50.942Z,1509685610.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:51.359Z,1509685611.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:51.739Z,1509685611.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:52.155Z,1509685612.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:52.515Z,1509685612.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:52.909Z,1509685612.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:53.311Z,1509685613.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:53.739Z,1509685613.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:54.139Z,1509685614.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:54.513Z,1509685614.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:54.911Z,1509685614.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:55.319Z,1509685615.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:55.738Z,1509685615.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:56.139Z,1509685616.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:56.539Z,1509685616.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:56.918Z,1509685616.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:57.313Z,1509685617.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:57.718Z,1509685617.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:58.147Z,1509685618.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:58.518Z,1509685618.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:58.912Z,1509685618.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:59.319Z,1509685619.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:06:59.723Z,1509685619.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:00.189Z,1509685620.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:00.541Z,1509685620.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:00.911Z,1509685620.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:01.319Z,1509685621.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:01.722Z,1509685621.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:02.141Z,1509685622.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:02.541Z,1509685622.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:02.916Z,1509685622.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:03.314Z,1509685623.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:03.741Z,1509685623.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:04.044Z,1509685624.044 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:07:04.044Z,1509685624.044 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T05:07:04.044Z,1509685624.044 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:07:04.166Z,1509685624.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:07:04.167Z,1509685624.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:04.265Z,1509685624.265 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:07:04.449Z,1509685624.449 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:07:04.619Z,1509685624.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T05:07:04.620Z,1509685624.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:04.695Z,1509685624.695 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:07:04.913Z,1509685624.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:07:04.914Z,1509685624.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:05.313Z,1509685625.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:07:05.314Z,1509685625.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:05.750Z,1509685625.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:07:05.751Z,1509685625.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:06.115Z,1509685626.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:07:06.116Z,1509685626.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:06.209Z,1509685626.209 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:07:06.209Z,1509685626.209 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T05:07:06.308Z,1509685626.308 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:07:06.309Z,1509685626.309 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:07:06.309Z,1509685626.309 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:07:06.309Z,1509685626.309 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:07:06.534Z,1509685626.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:07:06.535Z,1509685626.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:06.947Z,1509685626.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:07:06.948Z,1509685626.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:07.334Z,1509685627.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:07:07.335Z,1509685627.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:07.730Z,1509685627.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:07:07.731Z,1509685627.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:08.115Z,1509685628.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:07:08.115Z,1509685628.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:08.514Z,1509685628.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:07:08.515Z,1509685628.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:08.913Z,1509685628.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:07:08.914Z,1509685628.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:09.315Z,1509685629.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:07:09.317Z,1509685629.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:09.724Z,1509685629.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:07:09.725Z,1509685629.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:10.130Z,1509685630.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:07:10.131Z,1509685630.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:10.428Z,1509685630.428 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:07:10.539Z,1509685630.539 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:07:10.540Z,1509685630.540 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:07:10.541Z,1509685630.541 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:07:10.541Z,1509685630.541 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:07:10.568Z,1509685630.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:07:10.577Z,1509685630.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:10.922Z,1509685630.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:07:10.923Z,1509685630.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:11.422Z,1509685631.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:11.723Z,1509685631.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:12.129Z,1509685632.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:12.506Z,1509685632.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:12.927Z,1509685632.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:13.335Z,1509685633.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:13.730Z,1509685633.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:14.121Z,1509685634.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:14.511Z,1509685634.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:14.910Z,1509685634.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:15.307Z,1509685635.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:15.735Z,1509685635.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:16.134Z,1509685636.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:16.536Z,1509685636.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:16.907Z,1509685636.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:17.305Z,1509685637.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:17.733Z,1509685637.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:18.143Z,1509685638.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:21.396Z,1509685641.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:21.558Z,1509685641.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:21.992Z,1509685641.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:22.359Z,1509685642.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:22.751Z,1509685642.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:23.182Z,1509685643.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:23.544Z,1509685643.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:23.980Z,1509685643.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:24.339Z,1509685644.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:24.735Z,1509685644.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:25.137Z,1509685645.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:25.543Z,1509685645.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:25.951Z,1509685645.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:26.351Z,1509685646.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:26.766Z,1509685646.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:27.134Z,1509685647.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:27.534Z,1509685647.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:27.934Z,1509685647.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:28.334Z,1509685648.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:28.761Z,1509685648.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:29.140Z,1509685649.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:29.562Z,1509685649.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:29.974Z,1509685649.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:30.335Z,1509685650.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:30.734Z,1509685650.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:30.734Z,1509685650.734 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2017-11-03T05:07:30.734Z,1509685650.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:07:30.736Z,1509685650.736 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:30.736Z,1509685650.736 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2017-11-03T05:07:30.736Z,1509685650.736 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:07:30.738Z,1509685650.738 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:30.738Z,1509685650.738 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98
2017-11-03T05:07:30.738Z,1509685650.738 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:07:30.817Z,1509685650.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:07:30.817Z,1509685650.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:07:30.817Z,1509685650.817 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:07:31.240Z,1509685651.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:07:31.241Z,1509685651.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2017-11-03T05:07:31.241Z,1509685651.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:07:31.241Z,1509685651.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2017-11-03T05:07:31.242Z,1509685651.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:07:31.242Z,1509685651.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98
2017-11-03T05:07:31.537Z,1509685651.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:07:31.538Z,1509685651.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:07:31.538Z,1509685651.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:07:31.539Z,1509685651.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:07:31.539Z,1509685651.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:07:31.539Z,1509685651.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:07:31.540Z,1509685651.540 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:07:31.540Z,1509685651.540 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:07:31.541Z,1509685651.541 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:07:31.968Z,1509685651.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:32.351Z,1509685652.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:32.748Z,1509685652.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:33.145Z,1509685653.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:33.544Z,1509685653.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:33.958Z,1509685653.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:34.345Z,1509685654.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:34.749Z,1509685654.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:35.158Z,1509685655.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:35.600Z,1509685655.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:36.016Z,1509685656.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:36.327Z,1509685656.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:36.723Z,1509685656.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:37.167Z,1509685657.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:37.527Z,1509685657.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:37.990Z,1509685657.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:38.395Z,1509685658.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:38.753Z,1509685658.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:39.151Z,1509685659.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:39.527Z,1509685659.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:39.944Z,1509685659.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:40.346Z,1509685660.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:40.758Z,1509685660.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:41.153Z,1509685661.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:41.556Z,1509685661.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:41.935Z,1509685661.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:42.335Z,1509685662.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:42.756Z,1509685662.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:43.131Z,1509685663.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:43.556Z,1509685663.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:43.978Z,1509685663.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:44.352Z,1509685664.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:44.753Z,1509685664.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:45.126Z,1509685665.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:45.557Z,1509685665.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:45.968Z,1509685665.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:46.357Z,1509685666.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:46.753Z,1509685666.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:47.154Z,1509685667.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:47.554Z,1509685667.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:47.959Z,1509685667.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:48.335Z,1509685668.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:48.732Z,1509685668.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:49.132Z,1509685669.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:49.556Z,1509685669.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:49.982Z,1509685669.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:50.406Z,1509685670.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:50.740Z,1509685670.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:51.138Z,1509685671.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:51.571Z,1509685671.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:51.937Z,1509685671.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:52.366Z,1509685672.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:52.775Z,1509685672.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:53.140Z,1509685673.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:53.545Z,1509685673.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:53.935Z,1509685673.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:54.337Z,1509685674.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:54.745Z,1509685674.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:55.139Z,1509685675.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:55.538Z,1509685675.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:55.948Z,1509685675.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:56.346Z,1509685676.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:56.753Z,1509685676.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:57.140Z,1509685677.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:57.533Z,1509685677.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:57.963Z,1509685677.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:58.339Z,1509685678.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:58.749Z,1509685678.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:59.146Z,1509685679.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:59.551Z,1509685679.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:07:59.970Z,1509685679.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:00.352Z,1509685680.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:00.753Z,1509685680.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:01.127Z,1509685681.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:01.527Z,1509685681.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:01.977Z,1509685681.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:02.349Z,1509685682.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:02.749Z,1509685682.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:03.126Z,1509685683.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:03.527Z,1509685683.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:03.984Z,1509685683.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:04.329Z,1509685684.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:04.779Z,1509685684.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:05.179Z,1509685685.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:05.556Z,1509685685.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:05.963Z,1509685685.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:06.332Z,1509685686.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:06.759Z,1509685686.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:07.166Z,1509685687.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:07.535Z,1509685687.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:07.940Z,1509685687.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:08.362Z,1509685688.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:08.753Z,1509685688.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:09.136Z,1509685689.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:09.537Z,1509685689.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:09.943Z,1509685689.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:10.339Z,1509685690.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:10.756Z,1509685690.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:11.159Z,1509685691.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:11.548Z,1509685691.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:11.959Z,1509685691.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:12.327Z,1509685692.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:12.749Z,1509685692.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:13.127Z,1509685693.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:13.545Z,1509685693.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:13.973Z,1509685693.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:14.355Z,1509685694.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:14.749Z,1509685694.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:15.127Z,1509685695.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:15.527Z,1509685695.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:15.979Z,1509685695.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:16.347Z,1509685696.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:16.748Z,1509685696.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:17.155Z,1509685697.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:17.558Z,1509685697.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:17.999Z,1509685697.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:18.332Z,1509685698.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:21.591Z,1509685701.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:21.764Z,1509685701.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:22.165Z,1509685702.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:22.614Z,1509685702.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:22.964Z,1509685702.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:23.375Z,1509685703.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:23.783Z,1509685703.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:24.157Z,1509685704.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:24.561Z,1509685704.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:24.969Z,1509685704.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:25.363Z,1509685705.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:25.771Z,1509685705.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:26.142Z,1509685706.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:26.544Z,1509685706.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:26.961Z,1509685706.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:27.343Z,1509685707.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:27.767Z,1509685707.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:28.173Z,1509685708.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:28.574Z,1509685708.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:28.946Z,1509685708.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:29.346Z,1509685709.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:29.745Z,1509685709.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:30.167Z,1509685710.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:30.544Z,1509685710.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:30.971Z,1509685710.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:31.372Z,1509685711.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:31.771Z,1509685711.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:32.171Z,1509685712.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:32.551Z,1509685712.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:32.947Z,1509685712.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:33.342Z,1509685713.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:33.771Z,1509685713.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:34.221Z,1509685714.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:34.593Z,1509685714.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:34.946Z,1509685714.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:35.346Z,1509685715.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:35.790Z,1509685715.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:36.144Z,1509685716.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:36.614Z,1509685716.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:36.979Z,1509685716.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:37.390Z,1509685717.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:37.786Z,1509685717.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:38.142Z,1509685718.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:38.573Z,1509685718.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:38.945Z,1509685718.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:39.342Z,1509685719.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:39.718Z,1509685719.718 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T05:08:39.719Z,1509685719.719 [NAL9602] Data Fault, FailCount= 2
2017-11-03T05:08:39.719Z,1509685719.719 [NAL9602](ERROR): Data Fault
2017-11-03T05:08:39.751Z,1509685719.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:39.873Z,1509685719.873 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T05:08:40.118Z,1509685720.118 [NAL9602](INFO): Powering down
2017-11-03T05:08:40.151Z,1509685720.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:40.546Z,1509685720.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:40.946Z,1509685720.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:41.049Z,1509685721.049 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T05:08:41.049Z,1509685721.049 [NAL9602] No Fault, FailCount= 2
2017-11-03T05:08:41.374Z,1509685721.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:41.745Z,1509685721.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:42.151Z,1509685722.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:42.574Z,1509685722.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:42.945Z,1509685722.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:43.346Z,1509685723.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:43.751Z,1509685723.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:44.146Z,1509685724.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:44.546Z,1509685724.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:44.947Z,1509685724.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:45.346Z,1509685725.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:45.747Z,1509685725.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:46.174Z,1509685726.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:46.546Z,1509685726.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:46.951Z,1509685726.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:47.347Z,1509685727.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:47.745Z,1509685727.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:48.235Z,1509685728.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:48.555Z,1509685728.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:48.958Z,1509685728.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:49.355Z,1509685729.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:49.755Z,1509685729.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:50.175Z,1509685730.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:50.550Z,1509685730.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:50.996Z,1509685730.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:51.360Z,1509685731.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:51.775Z,1509685731.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:52.179Z,1509685732.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:52.560Z,1509685732.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:52.957Z,1509685732.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:53.343Z,1509685733.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:53.761Z,1509685733.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:54.164Z,1509685734.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:54.542Z,1509685734.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:54.944Z,1509685734.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:55.346Z,1509685735.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:55.744Z,1509685735.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:56.160Z,1509685736.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:56.544Z,1509685736.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:56.970Z,1509685736.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:57.343Z,1509685737.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:57.743Z,1509685737.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:58.162Z,1509685738.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:58.551Z,1509685738.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:58.942Z,1509685738.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:59.349Z,1509685739.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:08:59.747Z,1509685739.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:00.176Z,1509685740.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:00.549Z,1509685740.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:00.947Z,1509685740.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:01.355Z,1509685741.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:01.746Z,1509685741.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:02.199Z,1509685742.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:02.551Z,1509685742.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:02.987Z,1509685742.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:03.350Z,1509685743.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:03.750Z,1509685743.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:04.195Z,1509685744.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:04.579Z,1509685744.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:04.983Z,1509685744.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:05.350Z,1509685745.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:05.782Z,1509685745.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:06.190Z,1509685746.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:06.457Z,1509685746.457 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:09:06.457Z,1509685746.457 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T05:09:06.457Z,1509685746.457 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:09:06.549Z,1509685746.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:09:06.550Z,1509685746.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:06.629Z,1509685746.629 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:09:06.630Z,1509685746.630 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T05:09:06.860Z,1509685746.860 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:09:06.989Z,1509685746.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:09:06.990Z,1509685746.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:07.082Z,1509685747.082 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:09:07.354Z,1509685747.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:09:07.355Z,1509685747.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:07.753Z,1509685747.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:09:07.754Z,1509685747.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:08.154Z,1509685748.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:09:08.155Z,1509685748.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:08.553Z,1509685748.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:09:08.554Z,1509685748.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:08.953Z,1509685748.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:09:08.954Z,1509685748.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:09.351Z,1509685749.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:09:09.352Z,1509685749.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:09.751Z,1509685749.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:09:09.752Z,1509685749.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:10.153Z,1509685750.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:09:10.154Z,1509685750.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:10.512Z,1509685750.512 [NAL9602](INFO): Powering up NAL9602
2017-11-03T05:09:10.557Z,1509685750.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:09:10.558Z,1509685750.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:10.953Z,1509685750.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:09:10.954Z,1509685750.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:11.352Z,1509685751.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:09:11.353Z,1509685751.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:11.751Z,1509685751.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:09:11.752Z,1509685751.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:12.153Z,1509685752.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:09:12.154Z,1509685752.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:12.553Z,1509685752.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:09:12.554Z,1509685752.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:12.952Z,1509685752.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:09:12.953Z,1509685752.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:13.347Z,1509685753.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:09:13.348Z,1509685753.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:13.758Z,1509685753.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:09:13.759Z,1509685753.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:14.152Z,1509685754.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T05:09:14.153Z,1509685754.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:14.553Z,1509685754.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:09:14.554Z,1509685754.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:14.953Z,1509685754.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T05:09:14.954Z,1509685754.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:15.352Z,1509685755.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:09:15.353Z,1509685755.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:15.753Z,1509685755.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T05:09:15.754Z,1509685755.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:16.153Z,1509685756.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:09:16.154Z,1509685756.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:16.551Z,1509685756.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T05:09:16.552Z,1509685756.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:17.002Z,1509685757.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T05:09:17.003Z,1509685757.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:17.358Z,1509685757.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:09:17.359Z,1509685757.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:17.753Z,1509685757.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:09:17.754Z,1509685757.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:17.758Z,1509685757.758 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T05:04:17.7Z
2017-11-03T05:09:17.758Z,1509685757.758 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T05:09:17.758Z,1509685757.758 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T05:09:18.153Z,1509685758.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:09:18.154Z,1509685758.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:18.703Z,1509685758.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T05:09:18.704Z,1509685758.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:21.640Z,1509685761.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T05:09:21.641Z,1509685761.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:21.749Z,1509685761.749 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0116.lzma
2017-11-03T05:09:21.813Z,1509685761.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T05:09:21.814Z,1509685761.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:22.154Z,1509685762.154 [NAL9602](INFO): NAL9602 initialized
2017-11-03T05:09:22.200Z,1509685762.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:09:22.201Z,1509685762.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:22.551Z,1509685762.551 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0116.lzma.bak
2017-11-03T05:09:22.551Z,1509685762.551 [DataOverHttps](INFO): SBD MOMSN=5182773
2017-11-03T05:09:22.608Z,1509685762.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:09:22.613Z,1509685762.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:23.244Z,1509685763.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T05:09:23.245Z,1509685763.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:23.416Z,1509685763.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:09:23.417Z,1509685763.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:26.646Z,1509685766.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:26.823Z,1509685766.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:27.235Z,1509685767.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:27.590Z,1509685767.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:27.993Z,1509685767.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:28.409Z,1509685768.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:31.719Z,1509685771.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:31.833Z,1509685771.833 [DataOverHttps](INFO): Sending 272 bytes from file Logs/20171103T001125/Express0117.lzma
2017-11-03T05:09:31.881Z,1509685771.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:32.269Z,1509685772.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:32.627Z,1509685772.627 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0117.lzma.bak
2017-11-03T05:09:32.627Z,1509685772.627 [DataOverHttps](INFO): SBD MOMSN=5182775
2017-11-03T05:09:32.738Z,1509685772.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:33.342Z,1509685773.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:33.345Z,1509685773.345 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T05:09:33.346Z,1509685773.346 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T05:09:33.346Z,1509685773.346 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T05:09:33.530Z,1509685773.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:36.612Z,1509685776.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:36.815Z,1509685776.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:37.169Z,1509685777.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:37.570Z,1509685777.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:38.006Z,1509685778.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:38.395Z,1509685778.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:38.794Z,1509685778.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:39.215Z,1509685779.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:39.566Z,1509685779.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:39.966Z,1509685779.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:40.399Z,1509685780.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:40.771Z,1509685780.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:41.207Z,1509685781.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:41.595Z,1509685781.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:42.015Z,1509685782.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:42.366Z,1509685782.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:42.766Z,1509685782.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:43.166Z,1509685783.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:43.567Z,1509685783.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:43.966Z,1509685783.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:44.395Z,1509685784.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:44.796Z,1509685784.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:45.195Z,1509685785.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:45.571Z,1509685785.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:45.966Z,1509685785.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:46.367Z,1509685786.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:46.771Z,1509685786.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:47.197Z,1509685787.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:47.576Z,1509685787.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:47.995Z,1509685787.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:48.366Z,1509685788.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:48.768Z,1509685788.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:49.167Z,1509685789.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:49.567Z,1509685789.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:49.996Z,1509685789.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:50.391Z,1509685790.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:50.790Z,1509685790.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:51.189Z,1509685791.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:51.579Z,1509685791.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:51.977Z,1509685791.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:52.376Z,1509685792.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:52.827Z,1509685792.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:53.190Z,1509685793.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:53.631Z,1509685793.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:53.989Z,1509685793.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:54.385Z,1509685794.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:54.799Z,1509685794.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:55.185Z,1509685795.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:55.595Z,1509685795.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:55.992Z,1509685795.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:56.390Z,1509685796.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:56.791Z,1509685796.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:57.194Z,1509685797.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:57.585Z,1509685797.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:57.985Z,1509685797.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:58.381Z,1509685798.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:58.768Z,1509685798.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:59.191Z,1509685799.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:59.590Z,1509685799.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:09:59.990Z,1509685799.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:00.366Z,1509685800.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:00.767Z,1509685800.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:01.166Z,1509685801.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:01.566Z,1509685801.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:01.966Z,1509685801.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:02.393Z,1509685802.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:02.794Z,1509685802.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:03.195Z,1509685803.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:03.566Z,1509685803.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:03.969Z,1509685803.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:04.367Z,1509685804.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:04.775Z,1509685804.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:05.195Z,1509685805.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:05.595Z,1509685805.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:05.995Z,1509685805.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:06.403Z,1509685806.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:06.775Z,1509685806.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:07.284Z,1509685807.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:07.570Z,1509685807.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:07.998Z,1509685807.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:08.380Z,1509685808.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:08.783Z,1509685808.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:09.221Z,1509685809.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:09.569Z,1509685809.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:09.995Z,1509685809.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:10.399Z,1509685810.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:10.769Z,1509685810.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:11.184Z,1509685811.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:11.580Z,1509685811.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:11.975Z,1509685811.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:12.369Z,1509685812.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:12.799Z,1509685812.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:13.169Z,1509685813.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:13.568Z,1509685813.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:13.971Z,1509685813.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:14.376Z,1509685814.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:14.789Z,1509685814.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:15.181Z,1509685815.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:15.582Z,1509685815.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:15.977Z,1509685815.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:16.387Z,1509685816.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:16.782Z,1509685816.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:17.189Z,1509685817.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:17.591Z,1509685817.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:17.995Z,1509685817.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:18.378Z,1509685818.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:18.783Z,1509685818.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:19.176Z,1509685819.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:19.580Z,1509685819.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:19.980Z,1509685819.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:20.387Z,1509685820.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:20.795Z,1509685820.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:21.234Z,1509685821.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:21.576Z,1509685821.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:21.977Z,1509685821.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:22.374Z,1509685822.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:22.775Z,1509685822.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:23.189Z,1509685823.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:23.591Z,1509685823.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:23.994Z,1509685823.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:24.377Z,1509685824.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:24.776Z,1509685824.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:25.176Z,1509685825.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:25.571Z,1509685825.571 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:10:25.571Z,1509685825.571 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:10:25.572Z,1509685825.572 [BPC1](ERROR): Communications Fault
2017-11-03T05:10:25.580Z,1509685825.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:25.664Z,1509685825.664 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:10:25.987Z,1509685825.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:26.383Z,1509685826.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:26.792Z,1509685826.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:26.874Z,1509685826.874 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:10:26.874Z,1509685826.874 [BPC1] No Fault, FailCount= 1
2017-11-03T05:10:27.243Z,1509685827.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:27.578Z,1509685827.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:28.006Z,1509685828.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:28.387Z,1509685828.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:28.782Z,1509685828.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:29.189Z,1509685829.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:29.588Z,1509685829.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:29.983Z,1509685829.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:30.380Z,1509685830.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:30.775Z,1509685830.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:31.178Z,1509685831.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:31.580Z,1509685831.580 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:31.580Z,1509685831.580 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2017-11-03T05:10:31.580Z,1509685831.580 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:10:31.582Z,1509685831.582 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:31.582Z,1509685831.582 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2017-11-03T05:10:31.582Z,1509685831.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:10:31.584Z,1509685831.584 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:31.584Z,1509685831.584 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99
2017-11-03T05:10:31.584Z,1509685831.584 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:10:31.674Z,1509685831.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:10:31.674Z,1509685831.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:10:31.674Z,1509685831.674 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:10:32.062Z,1509685832.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:10:32.062Z,1509685832.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2017-11-03T05:10:32.062Z,1509685832.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:10:32.062Z,1509685832.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2017-11-03T05:10:32.063Z,1509685832.063 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:10:32.063Z,1509685832.063 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99
2017-11-03T05:10:32.392Z,1509685832.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:10:32.392Z,1509685832.392 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:10:32.393Z,1509685832.393 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:10:32.393Z,1509685832.393 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:10:32.394Z,1509685832.394 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:10:32.394Z,1509685832.394 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:10:32.394Z,1509685832.394 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:10:32.395Z,1509685832.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:10:32.395Z,1509685832.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:10:32.793Z,1509685832.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:10:32.794Z,1509685832.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:33.195Z,1509685833.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:10:33.196Z,1509685833.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:33.589Z,1509685833.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:10:33.590Z,1509685833.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:33.967Z,1509685833.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:10:33.985Z,1509685833.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:37.094Z,1509685837.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T05:10:37.095Z,1509685837.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:37.285Z,1509685837.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T05:10:37.286Z,1509685837.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:37.660Z,1509685837.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T05:10:37.661Z,1509685837.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:38.066Z,1509685838.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T05:10:38.067Z,1509685838.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:38.509Z,1509685838.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T05:10:38.510Z,1509685838.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:38.852Z,1509685838.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T05:10:38.853Z,1509685838.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:39.252Z,1509685839.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T05:10:39.253Z,1509685839.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:39.690Z,1509685839.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T05:10:39.691Z,1509685839.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:40.059Z,1509685840.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T05:10:40.061Z,1509685840.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:40.496Z,1509685840.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T05:10:40.497Z,1509685840.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:40.893Z,1509685840.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T05:10:40.894Z,1509685840.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:41.261Z,1509685841.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T05:10:41.262Z,1509685841.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:41.664Z,1509685841.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T05:10:41.665Z,1509685841.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:42.051Z,1509685842.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T05:10:42.052Z,1509685842.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:42.456Z,1509685842.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T05:10:42.457Z,1509685842.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:42.848Z,1509685842.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T05:10:42.849Z,1509685842.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:43.265Z,1509685843.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T05:10:43.266Z,1509685843.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:43.660Z,1509685843.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T05:10:43.661Z,1509685843.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:44.059Z,1509685844.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T05:10:44.060Z,1509685844.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:44.450Z,1509685844.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T05:10:44.451Z,1509685844.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:44.847Z,1509685844.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T05:10:44.848Z,1509685844.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:45.247Z,1509685845.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T05:10:45.248Z,1509685845.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:45.651Z,1509685845.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T05:10:45.652Z,1509685845.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:46.054Z,1509685846.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T05:10:46.055Z,1509685846.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:46.462Z,1509685846.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T05:10:46.463Z,1509685846.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:46.858Z,1509685846.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T05:10:46.859Z,1509685846.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:47.263Z,1509685847.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T05:10:47.264Z,1509685847.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:47.658Z,1509685847.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T05:10:47.659Z,1509685847.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:48.050Z,1509685848.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T05:10:48.052Z,1509685848.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:48.454Z,1509685848.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T05:10:48.455Z,1509685848.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:48.854Z,1509685848.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T05:10:48.855Z,1509685848.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:49.263Z,1509685849.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T05:10:49.265Z,1509685849.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:49.663Z,1509685849.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T05:10:49.664Z,1509685849.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:50.062Z,1509685850.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T05:10:50.063Z,1509685850.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:50.454Z,1509685850.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T05:10:50.455Z,1509685850.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:50.853Z,1509685850.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T05:10:50.854Z,1509685850.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:51.262Z,1509685851.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T05:10:51.263Z,1509685851.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:51.711Z,1509685851.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:52.048Z,1509685852.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:52.495Z,1509685852.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:52.866Z,1509685852.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:53.322Z,1509685853.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:53.714Z,1509685853.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:54.061Z,1509685854.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:54.463Z,1509685854.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:54.865Z,1509685854.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:55.276Z,1509685855.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:55.704Z,1509685855.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:56.085Z,1509685856.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:56.483Z,1509685856.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:56.860Z,1509685856.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:57.260Z,1509685857.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:57.717Z,1509685857.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:58.077Z,1509685858.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:58.488Z,1509685858.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:58.938Z,1509685858.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:59.291Z,1509685859.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:10:59.721Z,1509685859.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:00.079Z,1509685860.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:00.480Z,1509685860.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:00.890Z,1509685860.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:01.292Z,1509685861.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:01.690Z,1509685861.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:02.081Z,1509685862.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:02.475Z,1509685862.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:02.896Z,1509685862.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:03.285Z,1509685863.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:03.679Z,1509685863.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:04.129Z,1509685864.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:04.493Z,1509685864.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:04.897Z,1509685864.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:05.345Z,1509685865.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:05.680Z,1509685865.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:06.093Z,1509685866.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:06.443Z,1509685866.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:06.883Z,1509685866.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:07.295Z,1509685867.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:07.655Z,1509685867.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:08.078Z,1509685868.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:08.451Z,1509685868.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:08.846Z,1509685868.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:09.254Z,1509685869.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:09.647Z,1509685869.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:10.042Z,1509685870.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:10.474Z,1509685870.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:10.860Z,1509685870.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:11.251Z,1509685871.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:11.651Z,1509685871.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:12.051Z,1509685872.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:12.447Z,1509685872.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:12.847Z,1509685872.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:13.260Z,1509685873.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:13.653Z,1509685873.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:14.077Z,1509685874.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:14.453Z,1509685874.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:14.853Z,1509685874.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:15.251Z,1509685875.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:15.652Z,1509685875.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:16.051Z,1509685876.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:16.457Z,1509685876.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:16.854Z,1509685876.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:17.276Z,1509685877.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:17.652Z,1509685877.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:18.053Z,1509685878.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:18.503Z,1509685878.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:18.855Z,1509685878.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:19.289Z,1509685879.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:19.682Z,1509685879.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:20.087Z,1509685880.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:20.452Z,1509685880.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:20.886Z,1509685880.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:21.293Z,1509685881.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:21.652Z,1509685881.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:22.052Z,1509685882.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:22.489Z,1509685882.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:22.857Z,1509685882.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:23.283Z,1509685883.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:23.643Z,1509685883.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:24.055Z,1509685884.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:24.451Z,1509685884.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:24.843Z,1509685884.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:25.256Z,1509685885.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:25.651Z,1509685885.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:26.052Z,1509685886.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:26.449Z,1509685886.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:26.857Z,1509685886.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:27.255Z,1509685887.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:27.644Z,1509685887.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:28.039Z,1509685888.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:28.461Z,1509685888.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:28.864Z,1509685888.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:29.270Z,1509685889.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:29.646Z,1509685889.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:30.043Z,1509685890.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:30.446Z,1509685890.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:30.846Z,1509685890.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:31.259Z,1509685891.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:31.666Z,1509685891.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:32.090Z,1509685892.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:32.439Z,1509685892.439 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T05:11:32.439Z,1509685892.439 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:11:32.439Z,1509685892.439 [BPC1](ERROR): Data Fault
2017-11-03T05:11:32.448Z,1509685892.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:32.525Z,1509685892.525 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:11:32.846Z,1509685892.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:33.239Z,1509685893.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:33.645Z,1509685893.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:33.744Z,1509685893.744 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:11:33.745Z,1509685893.745 [BPC1] No Fault, FailCount= 1
2017-11-03T05:11:34.094Z,1509685894.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:37.894Z,1509685897.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:38.074Z,1509685898.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:38.453Z,1509685898.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:38.839Z,1509685898.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:39.246Z,1509685899.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:39.643Z,1509685899.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:40.051Z,1509685900.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:40.451Z,1509685900.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:40.853Z,1509685900.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:41.248Z,1509685901.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:41.640Z,1509685901.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:42.044Z,1509685902.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:42.443Z,1509685902.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:42.842Z,1509685902.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:43.253Z,1509685903.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:43.648Z,1509685903.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:44.051Z,1509685904.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:44.444Z,1509685904.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:44.841Z,1509685904.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:45.246Z,1509685905.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:45.645Z,1509685905.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:46.051Z,1509685906.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:46.452Z,1509685906.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:46.533Z,1509685906.533 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T05:11:46.864Z,1509685906.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:47.262Z,1509685907.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:47.648Z,1509685907.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:48.044Z,1509685908.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:48.444Z,1509685908.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:48.867Z,1509685908.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:49.256Z,1509685909.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:49.709Z,1509685909.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:50.051Z,1509685910.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:50.480Z,1509685910.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:50.851Z,1509685910.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:51.284Z,1509685911.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:51.681Z,1509685911.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:52.043Z,1509685912.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:52.453Z,1509685912.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:52.863Z,1509685912.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:53.259Z,1509685913.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:53.643Z,1509685913.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:54.045Z,1509685914.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:54.442Z,1509685914.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:54.840Z,1509685914.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:55.251Z,1509685915.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:55.650Z,1509685915.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:56.058Z,1509685916.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:56.441Z,1509685916.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:56.841Z,1509685916.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:57.242Z,1509685917.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:57.642Z,1509685917.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:58.046Z,1509685918.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:58.456Z,1509685918.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:58.863Z,1509685918.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:59.259Z,1509685919.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:11:59.643Z,1509685919.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:00.043Z,1509685920.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:00.444Z,1509685920.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:00.852Z,1509685920.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:01.256Z,1509685921.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:01.658Z,1509685921.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:02.045Z,1509685922.045 [BPC1](ERROR): Failed to parse message.
2017-11-03T05:12:02.045Z,1509685922.045 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T05:12:02.045Z,1509685922.045 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:12:02.045Z,1509685922.045 [BPC1](ERROR): Data Fault
2017-11-03T05:12:02.058Z,1509685922.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:02.165Z,1509685922.165 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:12:02.443Z,1509685922.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:02.844Z,1509685922.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:03.242Z,1509685923.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:03.341Z,1509685923.341 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:12:03.341Z,1509685923.341 [BPC1] No Fault, FailCount= 1
2017-11-03T05:12:03.691Z,1509685923.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:04.051Z,1509685924.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:04.486Z,1509685924.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:04.848Z,1509685924.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:05.248Z,1509685925.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:05.646Z,1509685925.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:06.043Z,1509685926.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:06.437Z,1509685926.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:06.840Z,1509685926.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:07.249Z,1509685927.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:07.648Z,1509685927.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:08.062Z,1509685928.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:08.440Z,1509685928.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:08.848Z,1509685928.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:09.240Z,1509685929.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:09.640Z,1509685929.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:10.047Z,1509685930.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:10.451Z,1509685930.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:10.855Z,1509685930.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:11.248Z,1509685931.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:11.650Z,1509685931.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:12.043Z,1509685932.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:12.442Z,1509685932.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:12.846Z,1509685932.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:13.262Z,1509685933.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:13.652Z,1509685933.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:14.047Z,1509685934.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:14.443Z,1509685934.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:14.847Z,1509685934.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:15.259Z,1509685935.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:15.644Z,1509685935.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:16.051Z,1509685936.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:16.451Z,1509685936.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:16.867Z,1509685936.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:17.252Z,1509685937.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:17.647Z,1509685937.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:18.063Z,1509685938.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:18.448Z,1509685938.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:18.898Z,1509685938.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:19.296Z,1509685939.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:19.655Z,1509685939.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:20.054Z,1509685940.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:20.433Z,1509685940.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:20.831Z,1509685940.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:21.231Z,1509685941.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:21.627Z,1509685941.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:22.031Z,1509685942.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:22.454Z,1509685942.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:22.854Z,1509685942.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:23.253Z,1509685943.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:23.655Z,1509685943.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:24.030Z,1509685944.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:24.431Z,1509685944.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:24.831Z,1509685944.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:25.253Z,1509685945.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:25.653Z,1509685945.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:26.063Z,1509685946.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:26.430Z,1509685946.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:26.831Z,1509685946.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:27.260Z,1509685947.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:27.638Z,1509685947.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:28.035Z,1509685948.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:28.457Z,1509685948.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:28.864Z,1509685948.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:29.265Z,1509685949.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:29.636Z,1509685949.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:30.090Z,1509685950.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:30.441Z,1509685950.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:30.840Z,1509685950.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:31.280Z,1509685951.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:31.648Z,1509685951.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:32.083Z,1509685952.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:32.445Z,1509685952.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:32.874Z,1509685952.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:33.286Z,1509685953.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:33.640Z,1509685953.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:34.044Z,1509685954.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:34.455Z,1509685954.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:37.541Z,1509685957.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:37.704Z,1509685957.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:38.091Z,1509685958.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:38.489Z,1509685958.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:38.879Z,1509685958.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:39.299Z,1509685959.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:39.705Z,1509685959.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:40.095Z,1509685960.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:40.502Z,1509685960.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:40.891Z,1509685960.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:41.291Z,1509685961.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:41.687Z,1509685961.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:42.102Z,1509685962.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:42.508Z,1509685962.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:42.900Z,1509685962.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:43.286Z,1509685963.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:43.703Z,1509685963.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:44.146Z,1509685964.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:44.499Z,1509685964.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:44.899Z,1509685964.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:45.344Z,1509685965.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:45.687Z,1509685965.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:46.130Z,1509685966.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:46.506Z,1509685966.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:46.946Z,1509685966.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:47.330Z,1509685967.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:47.675Z,1509685967.675 [PNI_TCM](ERROR): CRC does not match. Expected:0x5404 got:0x39610
2017-11-03T05:12:47.702Z,1509685967.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:48.091Z,1509685968.091 [PNI_TCM](ERROR): CRC does not match. Expected:0x56176 got:0x47389
2017-11-03T05:12:48.130Z,1509685968.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:48.522Z,1509685968.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:48.889Z,1509685968.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x32621 got:0x50201
2017-11-03T05:12:48.923Z,1509685968.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:49.288Z,1509685969.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:49.687Z,1509685969.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:50.119Z,1509685970.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:50.486Z,1509685970.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x23451 got:0x43549
2017-11-03T05:12:50.529Z,1509685970.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:50.899Z,1509685970.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:51.307Z,1509685971.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:51.702Z,1509685971.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:52.098Z,1509685972.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:52.545Z,1509685972.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:52.902Z,1509685972.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:53.298Z,1509685973.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:53.687Z,1509685973.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:54.099Z,1509685974.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:54.499Z,1509685974.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:54.919Z,1509685974.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:55.282Z,1509685975.282 [PNI_TCM](ERROR): CRC does not match. Expected:0x31826 got:0x29469
2017-11-03T05:12:55.306Z,1509685975.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:55.681Z,1509685975.681 [PNI_TCM](ERROR): CRC does not match. Expected:0x54648 got:0x57472
2017-11-03T05:12:55.707Z,1509685975.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:56.097Z,1509685976.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:56.522Z,1509685976.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:56.889Z,1509685976.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x39837 got:0x36125
2017-11-03T05:12:56.914Z,1509685976.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:57.290Z,1509685977.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:57.690Z,1509685977.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:58.103Z,1509685978.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:58.500Z,1509685978.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:58.906Z,1509685978.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:59.350Z,1509685979.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:12:59.695Z,1509685979.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:00.115Z,1509685980.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:00.490Z,1509685980.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:00.931Z,1509685980.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:01.346Z,1509685981.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:01.695Z,1509685981.695 [PNI_TCM](ERROR): CRC does not match. Expected:0x16112 got:0x28701
2017-11-03T05:13:01.731Z,1509685981.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:02.099Z,1509685982.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:02.488Z,1509685982.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:02.893Z,1509685982.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:03.290Z,1509685983.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:03.688Z,1509685983.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:04.103Z,1509685984.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:04.503Z,1509685984.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:04.897Z,1509685984.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:05.286Z,1509685985.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:05.678Z,1509685985.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x41590 got:0x7961
2017-11-03T05:13:05.702Z,1509685985.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:06.129Z,1509685986.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:06.495Z,1509685986.495 [PNI_TCM](ERROR): CRC does not match. Expected:0x58795 got:0x46877
2017-11-03T05:13:06.531Z,1509685986.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:06.903Z,1509685986.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:07.288Z,1509685987.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:07.693Z,1509685987.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:08.096Z,1509685988.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:08.499Z,1509685988.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:08.900Z,1509685988.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:09.329Z,1509685989.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:09.683Z,1509685989.683 [PNI_TCM](ERROR): CRC does not match. Expected:0x10306 got:0x7489
2017-11-03T05:13:09.710Z,1509685989.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:10.090Z,1509685990.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:10.486Z,1509685990.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:10.891Z,1509685990.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:11.300Z,1509685991.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:11.699Z,1509685991.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:12.105Z,1509685992.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:12.495Z,1509685992.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:12.896Z,1509685992.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:13.307Z,1509685993.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:13.735Z,1509685993.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:14.119Z,1509685994.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:14.493Z,1509685994.493 [PNI_TCM](ERROR): CRC does not match. Expected:0x20870 got:0x34911
2017-11-03T05:13:14.519Z,1509685994.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:14.938Z,1509685994.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:15.292Z,1509685995.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:15.719Z,1509685995.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:16.139Z,1509685996.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:16.503Z,1509685996.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:16.896Z,1509685996.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:17.310Z,1509685997.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:17.690Z,1509685997.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:18.107Z,1509685998.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:18.503Z,1509685998.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:18.901Z,1509685998.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:19.294Z,1509685999.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:19.692Z,1509685999.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:20.103Z,1509686000.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:20.511Z,1509686000.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:20.888Z,1509686000.888 [PNI_TCM](ERROR): CRC does not match. Expected:0x56303 got:0x7489
2017-11-03T05:13:20.915Z,1509686000.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:21.295Z,1509686001.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:21.694Z,1509686001.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:22.123Z,1509686002.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:22.492Z,1509686002.492 [PNI_TCM](ERROR): CRC does not match. Expected:0x42739 got:0x7489
2017-11-03T05:13:22.519Z,1509686002.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:22.906Z,1509686002.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:23.292Z,1509686003.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:23.695Z,1509686003.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:24.100Z,1509686004.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:24.507Z,1509686004.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:24.898Z,1509686004.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:25.298Z,1509686005.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:25.695Z,1509686005.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:26.103Z,1509686006.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:26.499Z,1509686006.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:26.919Z,1509686006.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:27.298Z,1509686007.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:27.693Z,1509686007.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:28.159Z,1509686008.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:28.506Z,1509686008.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:28.901Z,1509686008.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:29.314Z,1509686009.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:29.668Z,1509686009.668 [PNI_TCM](ERROR): CRC does not match. Expected:0x30819 got:0x6593
2017-11-03T05:13:29.707Z,1509686009.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:30.126Z,1509686010.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:30.541Z,1509686010.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:30.899Z,1509686010.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:31.302Z,1509686011.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:31.706Z,1509686011.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:32.107Z,1509686012.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:32.502Z,1509686012.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:32.502Z,1509686012.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2017-11-03T05:13:32.502Z,1509686012.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:13:32.504Z,1509686012.504 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:32.504Z,1509686012.504 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2017-11-03T05:13:32.504Z,1509686012.504 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:13:32.506Z,1509686012.506 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:32.506Z,1509686012.506 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100
2017-11-03T05:13:32.506Z,1509686012.506 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:13:32.581Z,1509686012.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:13:32.581Z,1509686012.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:13:32.581Z,1509686012.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:13:32.992Z,1509686012.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:13:32.993Z,1509686012.993 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2017-11-03T05:13:32.993Z,1509686012.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:13:32.993Z,1509686012.993 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2017-11-03T05:13:32.994Z,1509686012.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:13:32.994Z,1509686012.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100
2017-11-03T05:13:33.305Z,1509686013.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:13:33.306Z,1509686013.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:13:33.306Z,1509686013.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:13:33.307Z,1509686013.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:13:33.307Z,1509686013.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:13:33.307Z,1509686013.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:13:33.308Z,1509686013.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:13:33.308Z,1509686013.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:13:33.309Z,1509686013.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:13:33.682Z,1509686013.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:13:33.683Z,1509686013.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:34.102Z,1509686014.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:13:34.103Z,1509686014.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:34.502Z,1509686014.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:13:34.503Z,1509686014.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:37.630Z,1509686017.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T05:13:37.631Z,1509686017.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:37.785Z,1509686017.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T05:13:37.786Z,1509686017.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:38.179Z,1509686018.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T05:13:38.180Z,1509686018.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:38.579Z,1509686018.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T05:13:38.580Z,1509686018.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:38.978Z,1509686018.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T05:13:38.979Z,1509686018.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:39.402Z,1509686019.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T05:13:39.403Z,1509686019.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:39.806Z,1509686019.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T05:13:39.807Z,1509686019.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:40.205Z,1509686020.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T05:13:40.206Z,1509686020.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:40.579Z,1509686020.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T05:13:40.580Z,1509686020.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:40.978Z,1509686020.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T05:13:40.979Z,1509686020.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:41.379Z,1509686021.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T05:13:41.380Z,1509686021.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:41.779Z,1509686021.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T05:13:41.780Z,1509686021.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:42.234Z,1509686022.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T05:13:42.235Z,1509686022.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:42.634Z,1509686022.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T05:13:42.635Z,1509686022.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:43.006Z,1509686023.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T05:13:43.007Z,1509686023.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:43.404Z,1509686023.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T05:13:43.405Z,1509686023.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:43.778Z,1509686023.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T05:13:43.779Z,1509686023.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:44.214Z,1509686024.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T05:13:44.215Z,1509686024.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:44.609Z,1509686024.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T05:13:44.610Z,1509686024.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:44.978Z,1509686024.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T05:13:44.979Z,1509686024.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:45.392Z,1509686025.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T05:13:45.409Z,1509686025.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:45.791Z,1509686025.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T05:13:45.792Z,1509686025.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:46.192Z,1509686026.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T05:13:46.209Z,1509686026.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:46.578Z,1509686026.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T05:13:46.579Z,1509686026.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:46.978Z,1509686026.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T05:13:46.979Z,1509686026.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:47.379Z,1509686027.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T05:13:47.380Z,1509686027.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:47.778Z,1509686027.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T05:13:47.779Z,1509686027.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:48.208Z,1509686028.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T05:13:48.209Z,1509686028.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:48.591Z,1509686028.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T05:13:48.609Z,1509686028.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:48.992Z,1509686028.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T05:13:49.009Z,1509686029.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:49.390Z,1509686029.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T05:13:49.391Z,1509686029.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:49.778Z,1509686029.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T05:13:49.779Z,1509686029.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:50.182Z,1509686030.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T05:13:50.183Z,1509686030.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:50.583Z,1509686030.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T05:13:50.585Z,1509686030.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:50.982Z,1509686030.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T05:13:50.983Z,1509686030.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:51.388Z,1509686031.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T05:13:51.389Z,1509686031.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:51.807Z,1509686031.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T05:13:51.808Z,1509686031.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:52.209Z,1509686032.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T05:13:52.210Z,1509686032.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:52.583Z,1509686032.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:52.984Z,1509686032.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:53.384Z,1509686033.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:53.783Z,1509686033.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:54.210Z,1509686034.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:54.609Z,1509686034.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:54.988Z,1509686034.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:55.383Z,1509686035.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:55.783Z,1509686035.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:56.183Z,1509686036.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:56.658Z,1509686036.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:56.986Z,1509686036.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:57.430Z,1509686037.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:57.797Z,1509686037.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:58.230Z,1509686038.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:58.622Z,1509686038.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:58.988Z,1509686038.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:59.395Z,1509686039.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:13:59.783Z,1509686039.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:00.203Z,1509686040.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:00.596Z,1509686040.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:00.996Z,1509686040.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:01.388Z,1509686041.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:01.787Z,1509686041.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:02.187Z,1509686042.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:02.595Z,1509686042.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:02.986Z,1509686042.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:03.403Z,1509686043.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:03.803Z,1509686043.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:04.196Z,1509686044.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:04.588Z,1509686044.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:04.990Z,1509686044.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:05.390Z,1509686045.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:05.819Z,1509686045.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:06.203Z,1509686046.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:06.599Z,1509686046.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:07.003Z,1509686047.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:07.388Z,1509686047.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:07.788Z,1509686047.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:08.184Z,1509686048.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:08.588Z,1509686048.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:08.991Z,1509686048.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:09.397Z,1509686049.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:09.803Z,1509686049.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:10.199Z,1509686050.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:10.639Z,1509686050.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:10.986Z,1509686050.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:11.391Z,1509686051.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:11.822Z,1509686051.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:12.199Z,1509686052.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:12.631Z,1509686052.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:13.031Z,1509686053.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:13.386Z,1509686053.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:13.791Z,1509686053.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:14.191Z,1509686054.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:14.587Z,1509686054.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:14.991Z,1509686054.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:15.396Z,1509686055.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:15.799Z,1509686055.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:16.192Z,1509686056.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:16.585Z,1509686056.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:16.986Z,1509686056.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:17.382Z,1509686057.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:17.785Z,1509686057.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:18.199Z,1509686058.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:18.592Z,1509686058.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:19.003Z,1509686059.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:19.386Z,1509686059.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:19.791Z,1509686059.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:20.191Z,1509686060.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:20.587Z,1509686060.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:20.991Z,1509686060.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:21.396Z,1509686061.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:21.800Z,1509686061.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:22.193Z,1509686062.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:22.593Z,1509686062.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:22.986Z,1509686062.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:23.384Z,1509686063.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:23.793Z,1509686063.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:24.199Z,1509686064.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:24.596Z,1509686064.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:25.042Z,1509686065.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:25.403Z,1509686065.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:25.791Z,1509686065.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:26.186Z,1509686066.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:26.611Z,1509686066.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:26.985Z,1509686066.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:27.438Z,1509686067.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:27.827Z,1509686067.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:28.203Z,1509686068.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:28.584Z,1509686068.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:28.986Z,1509686068.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:29.384Z,1509686069.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:29.786Z,1509686069.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:30.199Z,1509686070.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:30.596Z,1509686070.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:30.995Z,1509686070.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:31.381Z,1509686071.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:31.785Z,1509686071.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:32.191Z,1509686072.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:32.586Z,1509686072.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:32.985Z,1509686072.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:33.396Z,1509686073.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:33.799Z,1509686073.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:33.802Z,1509686073.802 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T05:14:33.802Z,1509686073.802 [Default:CheckIn:C.Wait] Stopped
2017-11-03T05:14:33.802Z,1509686073.802 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T05:14:33.803Z,1509686073.803 [Default:CheckIn:D] Running Loop=1
2017-11-03T05:14:34.196Z,1509686074.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:34.199Z,1509686074.199 [Default:CheckIn:D] Stopped
2017-11-03T05:14:34.199Z,1509686074.199 [Default:CheckIn:E] Running Loop=1
2017-11-03T05:14:34.587Z,1509686074.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:34.590Z,1509686074.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 299.443880 min 
2017-11-03T05:14:34.590Z,1509686074.590 [Default:CheckIn:E] Stopped
2017-11-03T05:14:34.591Z,1509686074.591 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T05:14:34.591Z,1509686074.591 [Default:CheckIn] Stopped
2017-11-03T05:14:34.591Z,1509686074.591 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T05:14:34.591Z,1509686074.591 [Default:CheckIn](INFO): Running loop #30
2017-11-03T05:14:34.591Z,1509686074.591 [Default:CheckIn] Running Loop=30
2017-11-03T05:14:34.591Z,1509686074.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T05:14:34.591Z,1509686074.591 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T05:14:37.707Z,1509686077.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:37.906Z,1509686077.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:38.296Z,1509686078.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:38.710Z,1509686078.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:39.099Z,1509686079.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:39.515Z,1509686079.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:39.887Z,1509686079.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:40.315Z,1509686080.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:40.694Z,1509686080.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:41.098Z,1509686081.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:41.533Z,1509686081.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:41.896Z,1509686081.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:42.303Z,1509686082.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:42.706Z,1509686082.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:43.097Z,1509686083.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:43.493Z,1509686083.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:43.896Z,1509686083.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:44.295Z,1509686084.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:44.692Z,1509686084.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:45.103Z,1509686085.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:45.499Z,1509686085.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:45.900Z,1509686085.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:46.291Z,1509686086.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:46.676Z,1509686086.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:47.071Z,1509686087.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:47.503Z,1509686087.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:47.903Z,1509686087.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:48.301Z,1509686088.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:48.675Z,1509686088.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:49.096Z,1509686089.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:49.472Z,1509686089.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:49.875Z,1509686089.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:50.303Z,1509686090.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:50.702Z,1509686090.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:51.102Z,1509686091.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:51.476Z,1509686091.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:51.893Z,1509686091.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:52.296Z,1509686092.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:52.692Z,1509686092.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:53.099Z,1509686093.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:53.503Z,1509686093.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:53.898Z,1509686093.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:54.297Z,1509686094.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:54.711Z,1509686094.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:55.150Z,1509686095.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:55.504Z,1509686095.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:55.926Z,1509686095.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:56.283Z,1509686096.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:56.708Z,1509686096.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:57.123Z,1509686097.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:57.503Z,1509686097.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:57.905Z,1509686097.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:58.279Z,1509686098.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:58.679Z,1509686098.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:59.103Z,1509686099.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:59.503Z,1509686099.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:14:59.901Z,1509686099.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:00.274Z,1509686100.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:00.675Z,1509686100.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:01.083Z,1509686101.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:01.503Z,1509686101.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:01.891Z,1509686101.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:02.295Z,1509686102.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:02.684Z,1509686102.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:03.084Z,1509686103.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:03.484Z,1509686103.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:03.883Z,1509686103.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:04.288Z,1509686104.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:04.688Z,1509686104.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:05.094Z,1509686105.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:05.483Z,1509686105.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:05.887Z,1509686105.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:06.288Z,1509686106.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:06.685Z,1509686106.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:07.095Z,1509686107.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:07.488Z,1509686107.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:07.888Z,1509686107.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:08.284Z,1509686108.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:08.685Z,1509686108.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:09.158Z,1509686109.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:09.495Z,1509686109.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:09.918Z,1509686109.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:10.280Z,1509686110.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:10.726Z,1509686110.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:11.126Z,1509686111.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:11.495Z,1509686111.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:11.895Z,1509686111.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:12.284Z,1509686112.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:12.691Z,1509686112.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:13.095Z,1509686113.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:13.490Z,1509686113.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:13.895Z,1509686113.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:14.291Z,1509686114.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:14.685Z,1509686114.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:15.095Z,1509686115.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:15.495Z,1509686115.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:15.898Z,1509686115.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:16.280Z,1509686116.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:16.682Z,1509686116.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:17.091Z,1509686117.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:17.492Z,1509686117.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:17.895Z,1509686117.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:18.286Z,1509686118.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:18.691Z,1509686118.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:19.099Z,1509686119.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:19.502Z,1509686119.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:19.895Z,1509686119.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:20.284Z,1509686120.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:20.683Z,1509686120.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:21.095Z,1509686121.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:21.495Z,1509686121.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:21.902Z,1509686121.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:22.284Z,1509686122.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:22.683Z,1509686122.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:23.142Z,1509686123.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:23.541Z,1509686123.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:23.895Z,1509686123.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:24.322Z,1509686124.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:24.683Z,1509686124.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:25.127Z,1509686125.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:25.519Z,1509686125.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:25.903Z,1509686125.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:26.287Z,1509686126.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:26.690Z,1509686126.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:27.103Z,1509686127.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:27.495Z,1509686127.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:27.895Z,1509686127.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:28.284Z,1509686128.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:28.683Z,1509686128.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:29.095Z,1509686129.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:29.503Z,1509686129.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:29.896Z,1509686129.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:30.286Z,1509686130.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:30.682Z,1509686130.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:31.103Z,1509686131.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:31.496Z,1509686131.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:31.896Z,1509686131.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:32.288Z,1509686132.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:32.685Z,1509686132.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:33.097Z,1509686133.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:33.497Z,1509686133.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:33.896Z,1509686133.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:34.286Z,1509686134.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:34.688Z,1509686134.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:37.886Z,1509686137.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:38.066Z,1509686138.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:38.481Z,1509686138.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:38.826Z,1509686138.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:39.266Z,1509686139.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:39.668Z,1509686139.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:40.029Z,1509686140.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:40.441Z,1509686140.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:40.841Z,1509686140.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:41.244Z,1509686141.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:41.628Z,1509686141.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:42.036Z,1509686142.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:42.435Z,1509686142.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:42.833Z,1509686142.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:43.241Z,1509686143.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:43.638Z,1509686143.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:44.046Z,1509686144.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:44.433Z,1509686144.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:44.833Z,1509686144.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:45.224Z,1509686145.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:45.638Z,1509686145.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:46.015Z,1509686146.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:46.455Z,1509686146.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:46.859Z,1509686146.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:47.247Z,1509686147.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:47.635Z,1509686147.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:48.020Z,1509686148.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:48.423Z,1509686148.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:48.819Z,1509686148.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:49.247Z,1509686149.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:49.649Z,1509686149.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:50.047Z,1509686150.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:50.420Z,1509686150.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:50.823Z,1509686150.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:51.218Z,1509686151.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:51.620Z,1509686151.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:52.095Z,1509686152.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:52.450Z,1509686152.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:52.897Z,1509686152.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:53.251Z,1509686153.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:53.657Z,1509686153.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:54.059Z,1509686154.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:54.425Z,1509686154.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:54.856Z,1509686154.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:55.264Z,1509686155.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:55.639Z,1509686155.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:56.061Z,1509686156.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:56.436Z,1509686156.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:56.884Z,1509686156.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:57.263Z,1509686157.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:57.661Z,1509686157.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:58.059Z,1509686158.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:58.435Z,1509686158.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:58.839Z,1509686158.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:59.235Z,1509686159.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:15:59.639Z,1509686159.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:00.027Z,1509686160.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:00.447Z,1509686160.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:00.844Z,1509686160.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:01.252Z,1509686161.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:01.670Z,1509686161.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:02.106Z,1509686162.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:02.451Z,1509686162.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:02.859Z,1509686162.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:03.269Z,1509686163.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:03.652Z,1509686163.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:04.062Z,1509686164.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:04.491Z,1509686164.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:04.945Z,1509686164.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:05.254Z,1509686165.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:05.649Z,1509686165.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:06.106Z,1509686166.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:06.534Z,1509686166.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:06.857Z,1509686166.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:07.310Z,1509686167.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:07.638Z,1509686167.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:08.086Z,1509686168.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:08.463Z,1509686168.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:08.839Z,1509686168.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:09.265Z,1509686169.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:09.631Z,1509686169.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:10.035Z,1509686170.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:10.432Z,1509686170.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:10.854Z,1509686170.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:11.232Z,1509686171.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:11.631Z,1509686171.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:12.031Z,1509686172.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:12.430Z,1509686172.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:12.827Z,1509686172.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:13.233Z,1509686173.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:13.636Z,1509686173.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:14.032Z,1509686174.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:14.431Z,1509686174.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:14.828Z,1509686174.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:15.227Z,1509686175.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:15.628Z,1509686175.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:16.030Z,1509686176.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:16.433Z,1509686176.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:16.832Z,1509686176.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:17.232Z,1509686177.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:17.627Z,1509686177.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:18.027Z,1509686178.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:18.432Z,1509686178.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:18.830Z,1509686178.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:19.233Z,1509686179.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:19.633Z,1509686179.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:20.033Z,1509686180.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:20.494Z,1509686180.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:20.830Z,1509686180.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:21.228Z,1509686181.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:21.670Z,1509686181.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:22.029Z,1509686182.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:22.475Z,1509686182.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:22.875Z,1509686182.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:23.247Z,1509686183.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:23.629Z,1509686183.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:24.027Z,1509686184.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:24.429Z,1509686184.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:24.828Z,1509686184.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:25.241Z,1509686185.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:25.638Z,1509686185.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:26.037Z,1509686186.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:26.427Z,1509686186.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:26.826Z,1509686186.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:27.229Z,1509686187.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:27.628Z,1509686187.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:28.024Z,1509686188.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:28.443Z,1509686188.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:28.843Z,1509686188.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:29.235Z,1509686189.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:29.631Z,1509686189.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:30.028Z,1509686190.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:30.428Z,1509686190.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:30.828Z,1509686190.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:31.239Z,1509686191.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:31.634Z,1509686191.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:32.078Z,1509686192.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:32.447Z,1509686192.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:32.827Z,1509686192.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:33.227Z,1509686193.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:33.628Z,1509686193.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:33.628Z,1509686193.628 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 101
2017-11-03T05:16:33.629Z,1509686193.629 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:16:33.630Z,1509686193.630 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:33.630Z,1509686193.630 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 101
2017-11-03T05:16:33.630Z,1509686193.630 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:16:33.633Z,1509686193.633 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:33.633Z,1509686193.633 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101
2017-11-03T05:16:33.633Z,1509686193.633 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:16:33.717Z,1509686193.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:16:33.717Z,1509686193.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:16:33.718Z,1509686193.718 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:16:34.100Z,1509686194.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:16:34.101Z,1509686194.101 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 101
2017-11-03T05:16:34.101Z,1509686194.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:16:34.101Z,1509686194.101 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 101
2017-11-03T05:16:34.102Z,1509686194.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:16:34.102Z,1509686194.102 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101
2017-11-03T05:16:34.431Z,1509686194.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:16:34.432Z,1509686194.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:16:34.432Z,1509686194.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:16:34.433Z,1509686194.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:16:34.433Z,1509686194.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:16:34.433Z,1509686194.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:16:34.434Z,1509686194.434 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:16:34.434Z,1509686194.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:16:34.435Z,1509686194.435 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:16:34.864Z,1509686194.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:16:34.865Z,1509686194.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:37.926Z,1509686197.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T05:16:37.927Z,1509686197.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:38.106Z,1509686198.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T05:16:38.107Z,1509686198.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:38.471Z,1509686198.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:16:38.472Z,1509686198.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:38.919Z,1509686198.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T05:16:38.920Z,1509686198.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:39.283Z,1509686199.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T05:16:39.284Z,1509686199.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:39.718Z,1509686199.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T05:16:39.719Z,1509686199.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:40.090Z,1509686200.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T05:16:40.091Z,1509686200.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:40.510Z,1509686200.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T05:16:40.511Z,1509686200.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:40.877Z,1509686200.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:16:40.879Z,1509686200.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:41.274Z,1509686201.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:16:41.274Z,1509686201.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:41.683Z,1509686201.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T05:16:41.684Z,1509686201.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:42.098Z,1509686202.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T05:16:42.099Z,1509686202.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:42.541Z,1509686202.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T05:16:42.542Z,1509686202.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:42.890Z,1509686202.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T05:16:42.891Z,1509686202.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:43.271Z,1509686203.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x51763 got:0x10362
2017-11-03T05:16:43.298Z,1509686203.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T05:16:43.299Z,1509686203.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:43.685Z,1509686203.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T05:16:43.687Z,1509686203.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:44.090Z,1509686204.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T05:16:44.091Z,1509686204.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:44.488Z,1509686204.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T05:16:44.489Z,1509686204.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:44.894Z,1509686204.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T05:16:44.895Z,1509686204.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:45.295Z,1509686205.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T05:16:45.296Z,1509686205.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:45.683Z,1509686205.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T05:16:45.685Z,1509686205.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:46.094Z,1509686206.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T05:16:46.095Z,1509686206.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:46.494Z,1509686206.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T05:16:46.495Z,1509686206.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:46.910Z,1509686206.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T05:16:46.911Z,1509686206.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:47.283Z,1509686207.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T05:16:47.284Z,1509686207.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:47.679Z,1509686207.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T05:16:47.681Z,1509686207.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:48.094Z,1509686208.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T05:16:48.095Z,1509686208.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:48.510Z,1509686208.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T05:16:48.511Z,1509686208.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:48.890Z,1509686208.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T05:16:48.891Z,1509686208.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:49.281Z,1509686209.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T05:16:49.282Z,1509686209.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:49.680Z,1509686209.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T05:16:49.681Z,1509686209.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:50.110Z,1509686210.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T05:16:50.111Z,1509686210.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:50.492Z,1509686210.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T05:16:50.493Z,1509686210.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:50.893Z,1509686210.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T05:16:50.894Z,1509686210.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:51.286Z,1509686211.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T05:16:51.287Z,1509686211.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:51.695Z,1509686211.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T05:16:51.696Z,1509686211.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:52.134Z,1509686212.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T05:16:52.135Z,1509686212.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:52.538Z,1509686212.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T05:16:52.538Z,1509686212.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:52.890Z,1509686212.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T05:16:52.891Z,1509686212.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:53.318Z,1509686213.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T05:16:53.319Z,1509686213.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:53.684Z,1509686213.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:54.123Z,1509686214.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:54.514Z,1509686214.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:54.911Z,1509686214.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:55.282Z,1509686215.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:55.681Z,1509686215.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:56.091Z,1509686216.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:56.518Z,1509686216.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:56.875Z,1509686216.875 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T05:16:56.895Z,1509686216.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:57.271Z,1509686217.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x64320 got:0x17074
2017-11-03T05:16:57.298Z,1509686217.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:57.667Z,1509686217.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x21854 got:0x37943
2017-11-03T05:16:57.698Z,1509686217.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:58.118Z,1509686218.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:58.482Z,1509686218.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T05:16:58.522Z,1509686218.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:58.895Z,1509686218.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:59.282Z,1509686219.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:16:59.695Z,1509686219.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:00.087Z,1509686220.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:00.498Z,1509686220.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:00.895Z,1509686220.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:01.311Z,1509686221.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:01.681Z,1509686221.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:02.081Z,1509686222.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:02.482Z,1509686222.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:02.891Z,1509686222.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:03.291Z,1509686223.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:03.694Z,1509686223.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:04.095Z,1509686224.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:04.495Z,1509686224.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:04.892Z,1509686224.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:05.285Z,1509686225.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:05.687Z,1509686225.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:06.118Z,1509686226.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:06.485Z,1509686226.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T05:17:06.566Z,1509686226.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:06.889Z,1509686226.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:07.316Z,1509686227.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:07.692Z,1509686227.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:08.124Z,1509686228.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:08.494Z,1509686228.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:08.923Z,1509686228.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:09.303Z,1509686229.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:09.682Z,1509686229.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:10.077Z,1509686230.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:10.483Z,1509686230.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:10.885Z,1509686230.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:11.299Z,1509686231.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:11.689Z,1509686231.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:12.087Z,1509686232.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:12.483Z,1509686232.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:12.863Z,1509686232.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:13.287Z,1509686233.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:13.670Z,1509686233.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:14.099Z,1509686234.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:14.493Z,1509686234.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:14.895Z,1509686234.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:15.271Z,1509686235.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:15.695Z,1509686235.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:16.098Z,1509686236.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:16.503Z,1509686236.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:16.895Z,1509686236.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:17.298Z,1509686237.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:17.667Z,1509686237.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:18.090Z,1509686238.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:18.489Z,1509686238.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:18.898Z,1509686238.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:19.292Z,1509686239.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:19.670Z,1509686239.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:20.094Z,1509686240.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:20.499Z,1509686240.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:20.946Z,1509686240.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:21.277Z,1509686241.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:21.677Z,1509686241.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:22.119Z,1509686242.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:22.497Z,1509686242.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:22.919Z,1509686242.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:23.319Z,1509686243.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:23.695Z,1509686243.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:24.078Z,1509686244.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:24.474Z,1509686244.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:24.873Z,1509686244.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:25.305Z,1509686245.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:25.704Z,1509686245.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:26.080Z,1509686246.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:26.473Z,1509686246.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:26.879Z,1509686246.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:27.272Z,1509686247.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:27.674Z,1509686247.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:28.103Z,1509686248.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:28.507Z,1509686248.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:28.899Z,1509686248.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:29.274Z,1509686249.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:29.673Z,1509686249.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:30.101Z,1509686250.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:30.505Z,1509686250.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:30.902Z,1509686250.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:31.302Z,1509686251.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:31.700Z,1509686251.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:32.079Z,1509686252.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:32.475Z,1509686252.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:32.882Z,1509686252.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:33.302Z,1509686253.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:33.704Z,1509686253.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:34.103Z,1509686254.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:34.474Z,1509686254.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:34.901Z,1509686254.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:38.040Z,1509686258.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:38.180Z,1509686258.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:38.609Z,1509686258.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:39.031Z,1509686259.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:39.408Z,1509686259.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:39.823Z,1509686259.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:40.212Z,1509686260.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:40.604Z,1509686260.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:41.003Z,1509686261.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:41.418Z,1509686261.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:41.819Z,1509686261.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:42.211Z,1509686262.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:42.587Z,1509686262.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:42.983Z,1509686262.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:43.388Z,1509686263.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:43.787Z,1509686263.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:44.208Z,1509686264.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:44.609Z,1509686264.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:45.009Z,1509686265.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:45.387Z,1509686265.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:45.806Z,1509686265.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:46.209Z,1509686266.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:46.588Z,1509686266.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:46.998Z,1509686266.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:47.410Z,1509686267.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:47.809Z,1509686267.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:48.207Z,1509686268.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:48.598Z,1509686268.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:49.007Z,1509686269.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:49.405Z,1509686269.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:49.804Z,1509686269.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:50.208Z,1509686270.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:50.611Z,1509686270.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:51.018Z,1509686271.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:51.406Z,1509686271.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:51.801Z,1509686271.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:52.238Z,1509686272.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:52.635Z,1509686272.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:53.002Z,1509686273.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:53.412Z,1509686273.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:53.853Z,1509686273.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:54.207Z,1509686274.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:54.622Z,1509686274.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:55.027Z,1509686275.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:55.407Z,1509686275.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:55.807Z,1509686275.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:56.211Z,1509686276.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:56.608Z,1509686276.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:57.007Z,1509686277.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:57.388Z,1509686277.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:57.788Z,1509686277.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:58.184Z,1509686278.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:58.606Z,1509686278.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:59.015Z,1509686279.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:59.418Z,1509686279.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:17:59.813Z,1509686279.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:00.219Z,1509686280.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:00.590Z,1509686280.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:00.988Z,1509686280.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:01.389Z,1509686281.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:01.792Z,1509686281.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:02.219Z,1509686282.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:02.619Z,1509686282.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:03.014Z,1509686283.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:03.415Z,1509686283.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:03.787Z,1509686283.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:04.187Z,1509686284.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:04.588Z,1509686284.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:04.987Z,1509686284.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:05.413Z,1509686285.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:05.819Z,1509686285.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:06.211Z,1509686286.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:06.611Z,1509686286.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:07.055Z,1509686287.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:07.399Z,1509686287.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:07.828Z,1509686287.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:08.211Z,1509686288.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:08.651Z,1509686288.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:09.050Z,1509686289.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:09.405Z,1509686289.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:09.803Z,1509686289.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:10.209Z,1509686290.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:10.589Z,1509686290.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:10.987Z,1509686290.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:11.412Z,1509686291.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:11.810Z,1509686291.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:12.211Z,1509686292.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:12.587Z,1509686292.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:12.987Z,1509686292.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:13.388Z,1509686293.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:13.790Z,1509686293.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:14.234Z,1509686294.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:14.619Z,1509686294.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:15.013Z,1509686295.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:15.387Z,1509686295.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:15.787Z,1509686295.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:16.187Z,1509686296.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:16.614Z,1509686296.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:17.014Z,1509686297.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:17.413Z,1509686297.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:17.810Z,1509686297.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:18.211Z,1509686298.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:18.587Z,1509686298.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:18.987Z,1509686298.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:19.388Z,1509686299.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:19.790Z,1509686299.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:20.211Z,1509686300.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:20.608Z,1509686300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:21.038Z,1509686301.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:21.383Z,1509686301.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:21.819Z,1509686301.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:22.215Z,1509686302.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:22.619Z,1509686302.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:23.019Z,1509686303.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:23.419Z,1509686303.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:23.811Z,1509686303.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:24.211Z,1509686304.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:24.588Z,1509686304.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:24.987Z,1509686304.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:25.388Z,1509686305.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:25.787Z,1509686305.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:26.218Z,1509686306.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:26.719Z,1509686306.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:27.013Z,1509686307.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:27.387Z,1509686307.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:27.790Z,1509686307.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:28.194Z,1509686308.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:28.588Z,1509686308.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:28.993Z,1509686308.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:29.414Z,1509686309.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:29.814Z,1509686309.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:30.218Z,1509686310.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:30.615Z,1509686310.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:30.989Z,1509686310.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:31.415Z,1509686311.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:31.793Z,1509686311.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:32.216Z,1509686312.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:32.618Z,1509686312.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:33.014Z,1509686313.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:33.438Z,1509686313.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:33.792Z,1509686313.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:34.198Z,1509686314.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:34.593Z,1509686314.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:34.996Z,1509686314.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:38.135Z,1509686318.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:38.318Z,1509686318.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:38.691Z,1509686318.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:39.084Z,1509686319.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:39.522Z,1509686319.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:39.879Z,1509686319.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:40.327Z,1509686320.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:40.727Z,1509686320.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:41.091Z,1509686321.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:41.481Z,1509686321.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:41.883Z,1509686321.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:42.280Z,1509686322.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:42.684Z,1509686322.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:43.092Z,1509686323.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:43.488Z,1509686323.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:43.899Z,1509686323.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:44.287Z,1509686324.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:44.686Z,1509686324.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:45.095Z,1509686325.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:45.492Z,1509686325.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:45.892Z,1509686325.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:46.283Z,1509686326.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:46.680Z,1509686326.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:47.094Z,1509686327.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:47.498Z,1509686327.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:47.894Z,1509686327.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:48.284Z,1509686328.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:48.691Z,1509686328.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:49.093Z,1509686329.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:49.492Z,1509686329.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:49.896Z,1509686329.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:50.281Z,1509686330.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:50.696Z,1509686330.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:51.096Z,1509686331.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:51.492Z,1509686331.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:51.936Z,1509686331.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:52.286Z,1509686332.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:52.716Z,1509686332.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:53.092Z,1509686333.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:53.521Z,1509686333.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:53.892Z,1509686333.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:54.320Z,1509686334.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:54.708Z,1509686334.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:55.098Z,1509686335.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:55.492Z,1509686335.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:55.896Z,1509686335.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:56.282Z,1509686336.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:56.687Z,1509686336.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:57.097Z,1509686337.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:57.492Z,1509686337.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:57.898Z,1509686337.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:58.280Z,1509686338.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:58.691Z,1509686338.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:59.091Z,1509686339.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:59.495Z,1509686339.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:18:59.892Z,1509686339.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:00.286Z,1509686340.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:00.682Z,1509686340.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:01.092Z,1509686341.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:01.502Z,1509686341.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:01.898Z,1509686341.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:02.282Z,1509686342.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:02.680Z,1509686342.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:03.096Z,1509686343.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:03.496Z,1509686343.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:03.892Z,1509686343.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:04.284Z,1509686344.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:04.680Z,1509686344.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:05.135Z,1509686345.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:05.502Z,1509686345.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:05.892Z,1509686345.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:06.291Z,1509686346.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:06.703Z,1509686346.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:06.825Z,1509686346.825 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:19:06.825Z,1509686346.825 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T05:19:06.848Z,1509686346.848 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:19:06.849Z,1509686346.849 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:19:06.849Z,1509686346.849 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:19:06.849Z,1509686346.849 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:19:07.093Z,1509686347.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:07.523Z,1509686347.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:07.948Z,1509686347.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:08.307Z,1509686348.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:08.707Z,1509686348.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:09.102Z,1509686349.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:09.503Z,1509686349.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:09.902Z,1509686349.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:10.274Z,1509686350.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:10.679Z,1509686350.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:10.974Z,1509686350.974 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:19:11.059Z,1509686351.059 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:19:11.060Z,1509686351.060 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:19:11.061Z,1509686351.061 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:19:11.061Z,1509686351.061 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:19:11.134Z,1509686351.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:11.514Z,1509686351.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:11.975Z,1509686351.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:12.281Z,1509686352.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:12.676Z,1509686352.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:13.091Z,1509686353.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:13.485Z,1509686353.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:13.885Z,1509686353.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:14.280Z,1509686354.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:14.681Z,1509686354.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:15.084Z,1509686355.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:15.485Z,1509686355.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:15.885Z,1509686355.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:16.280Z,1509686356.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:16.681Z,1509686356.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:17.091Z,1509686357.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:17.488Z,1509686357.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:17.885Z,1509686357.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:18.281Z,1509686358.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:18.681Z,1509686358.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:19.089Z,1509686359.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:19.528Z,1509686359.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:19.910Z,1509686359.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:20.283Z,1509686360.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:20.726Z,1509686360.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:21.093Z,1509686361.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:21.488Z,1509686361.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:21.922Z,1509686361.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:22.282Z,1509686362.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:22.714Z,1509686362.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:23.131Z,1509686363.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:23.443Z,1509686363.443 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T05:19:23.443Z,1509686363.443 [NAL9602] Data Fault, FailCount= 3
2017-11-03T05:19:23.443Z,1509686363.443 [NAL9602](ERROR): Data Fault
2017-11-03T05:19:23.510Z,1509686363.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:23.613Z,1509686363.613 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T05:19:23.842Z,1509686363.842 [NAL9602](INFO): Powering down
2017-11-03T05:19:23.890Z,1509686363.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:24.282Z,1509686364.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:24.681Z,1509686364.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:24.772Z,1509686364.772 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T05:19:24.772Z,1509686364.772 [NAL9602] No Fault, FailCount= 3
2017-11-03T05:19:25.130Z,1509686365.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:25.482Z,1509686365.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:25.881Z,1509686365.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:26.282Z,1509686366.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:26.687Z,1509686366.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:27.081Z,1509686367.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:27.498Z,1509686367.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:27.887Z,1509686367.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:28.281Z,1509686368.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:28.682Z,1509686368.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:29.082Z,1509686369.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:29.515Z,1509686369.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:29.881Z,1509686369.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:30.294Z,1509686370.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:30.681Z,1509686370.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:31.078Z,1509686371.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:31.481Z,1509686371.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:31.886Z,1509686371.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:32.287Z,1509686372.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:32.679Z,1509686372.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:33.095Z,1509686373.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:33.504Z,1509686373.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:33.881Z,1509686373.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:34.286Z,1509686374.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:34.681Z,1509686374.681 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:34.681Z,1509686374.681 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 102
2017-11-03T05:19:34.681Z,1509686374.681 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:19:34.683Z,1509686374.683 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:34.683Z,1509686374.683 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 102
2017-11-03T05:19:34.683Z,1509686374.683 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:19:34.685Z,1509686374.685 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:34.685Z,1509686374.685 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102
2017-11-03T05:19:34.685Z,1509686374.685 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:19:34.687Z,1509686374.687 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T05:14:34.6Z
2017-11-03T05:19:34.687Z,1509686374.687 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T05:19:34.687Z,1509686374.687 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T05:19:34.769Z,1509686374.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:19:34.769Z,1509686374.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:19:34.769Z,1509686374.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:19:35.176Z,1509686375.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:19:35.176Z,1509686375.176 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 102
2017-11-03T05:19:35.177Z,1509686375.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:19:35.177Z,1509686375.177 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 102
2017-11-03T05:19:35.177Z,1509686375.177 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:19:35.177Z,1509686375.177 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102
2017-11-03T05:19:38.439Z,1509686378.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:19:38.440Z,1509686378.440 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:19:38.440Z,1509686378.440 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:19:38.445Z,1509686378.445 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:19:38.445Z,1509686378.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:19:38.445Z,1509686378.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:19:38.446Z,1509686378.446 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:19:38.446Z,1509686378.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:19:38.446Z,1509686378.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:19:38.545Z,1509686378.545 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0120.lzma
2017-11-03T05:19:38.592Z,1509686378.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:39.031Z,1509686379.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:39.339Z,1509686379.339 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0120.lzma.bak
2017-11-03T05:19:39.339Z,1509686379.339 [DataOverHttps](INFO): SBD MOMSN=5182793
2017-11-03T05:19:39.402Z,1509686379.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:40.015Z,1509686380.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:40.228Z,1509686380.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:43.509Z,1509686383.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:43.687Z,1509686383.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:44.064Z,1509686384.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:44.461Z,1509686384.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:44.941Z,1509686384.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:45.289Z,1509686385.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:48.607Z,1509686388.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:52.358Z,1509686392.358 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171103T001125/Express0121.lzma
2017-11-03T05:19:52.493Z,1509686392.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:52.637Z,1509686392.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:53.218Z,1509686393.218 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0121.lzma.bak
2017-11-03T05:19:53.219Z,1509686393.219 [DataOverHttps](INFO): SBD MOMSN=5182795
2017-11-03T05:19:53.374Z,1509686393.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:53.810Z,1509686393.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:53.813Z,1509686393.813 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T05:19:53.814Z,1509686393.814 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T05:19:53.814Z,1509686393.814 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T05:19:53.938Z,1509686393.938 [NAL9602](INFO): Powering up NAL9602
2017-11-03T05:19:54.026Z,1509686394.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:57.207Z,1509686397.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:57.419Z,1509686397.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:57.807Z,1509686397.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:58.177Z,1509686398.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:58.578Z,1509686398.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:59.018Z,1509686399.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:59.391Z,1509686399.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:19:59.785Z,1509686399.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:00.190Z,1509686400.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:00.581Z,1509686400.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:00.993Z,1509686400.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:01.384Z,1509686401.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:01.780Z,1509686401.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:02.227Z,1509686402.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:02.590Z,1509686402.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:02.996Z,1509686402.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:03.383Z,1509686403.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:03.783Z,1509686403.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:04.184Z,1509686404.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:04.592Z,1509686404.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:04.955Z,1509686404.955 [NAL9602](INFO): NAL9602 initialized
2017-11-03T05:20:05.025Z,1509686405.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:05.384Z,1509686405.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:05.803Z,1509686405.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:06.195Z,1509686406.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:06.582Z,1509686406.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:06.981Z,1509686406.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:07.393Z,1509686407.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:07.842Z,1509686407.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:08.195Z,1509686408.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:08.630Z,1509686408.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:08.987Z,1509686408.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:09.479Z,1509686409.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:09.826Z,1509686409.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:10.186Z,1509686410.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:10.599Z,1509686410.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:11.003Z,1509686411.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:11.454Z,1509686411.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:11.787Z,1509686411.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:12.185Z,1509686412.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:12.587Z,1509686412.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:12.980Z,1509686412.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:13.395Z,1509686413.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:13.803Z,1509686413.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:14.200Z,1509686414.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:14.599Z,1509686414.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:14.983Z,1509686414.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:15.388Z,1509686415.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:15.785Z,1509686415.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:16.189Z,1509686416.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:16.600Z,1509686416.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:17.001Z,1509686417.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:17.399Z,1509686417.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:17.788Z,1509686417.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:18.191Z,1509686418.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:18.589Z,1509686418.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:19.039Z,1509686419.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:19.385Z,1509686419.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:19.803Z,1509686419.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:20.207Z,1509686420.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:20.643Z,1509686420.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:20.991Z,1509686420.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:21.384Z,1509686421.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:21.787Z,1509686421.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:22.189Z,1509686422.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:22.596Z,1509686422.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:22.996Z,1509686422.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:23.457Z,1509686423.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:23.792Z,1509686423.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:24.191Z,1509686424.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:24.597Z,1509686424.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:24.972Z,1509686424.972 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:20:24.972Z,1509686424.972 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:20:24.972Z,1509686424.972 [BPC1](ERROR): Communications Fault
2017-11-03T05:20:25.004Z,1509686425.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:25.093Z,1509686425.093 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:20:25.444Z,1509686425.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:25.789Z,1509686425.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:26.210Z,1509686426.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:26.308Z,1509686426.308 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:20:26.309Z,1509686426.309 [BPC1] No Fault, FailCount= 1
2017-11-03T05:20:26.659Z,1509686426.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:27.031Z,1509686427.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:27.391Z,1509686427.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:27.791Z,1509686427.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:28.191Z,1509686428.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:28.612Z,1509686428.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:29.012Z,1509686429.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:29.389Z,1509686429.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:29.786Z,1509686429.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:30.194Z,1509686430.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:30.589Z,1509686430.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:30.989Z,1509686430.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:31.387Z,1509686431.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:31.794Z,1509686431.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:32.221Z,1509686432.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:32.599Z,1509686432.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:33.099Z,1509686433.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:33.392Z,1509686433.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:33.797Z,1509686433.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:34.175Z,1509686434.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:34.599Z,1509686434.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:35.007Z,1509686435.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:35.407Z,1509686435.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:35.803Z,1509686435.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:36.175Z,1509686436.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:36.578Z,1509686436.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:37.003Z,1509686437.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:37.519Z,1509686437.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:37.788Z,1509686437.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:38.189Z,1509686438.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:38.614Z,1509686438.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:38.979Z,1509686438.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:39.467Z,1509686439.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:39.784Z,1509686439.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:40.215Z,1509686440.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:40.589Z,1509686440.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:40.995Z,1509686440.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:41.393Z,1509686441.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:41.783Z,1509686441.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:42.185Z,1509686442.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:42.580Z,1509686442.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:42.989Z,1509686442.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:43.386Z,1509686443.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:43.792Z,1509686443.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:44.189Z,1509686444.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:44.589Z,1509686444.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:44.989Z,1509686444.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:45.383Z,1509686445.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:45.834Z,1509686445.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:46.187Z,1509686446.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:46.595Z,1509686446.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:47.030Z,1509686447.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:47.396Z,1509686447.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:47.784Z,1509686447.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:48.183Z,1509686448.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:48.586Z,1509686448.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:48.985Z,1509686448.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:49.393Z,1509686449.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:49.826Z,1509686449.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:50.195Z,1509686450.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:50.596Z,1509686450.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:51.003Z,1509686451.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:51.451Z,1509686451.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:51.776Z,1509686451.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:52.211Z,1509686452.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:52.607Z,1509686452.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:53.023Z,1509686453.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:53.498Z,1509686453.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:53.775Z,1509686453.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:54.198Z,1509686454.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:20:54.578Z,1509686454.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:00.302Z,1509686460.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:00.494Z,1509686460.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:00.965Z,1509686460.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:01.309Z,1509686461.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:01.703Z,1509686461.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:02.074Z,1509686462.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:02.476Z,1509686462.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:02.879Z,1509686462.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:03.283Z,1509686463.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:03.687Z,1509686463.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:04.076Z,1509686464.076 [PNI_TCM](ERROR): CRC does not match. Expected:0x1061 got:0x56177
2017-11-03T05:21:04.124Z,1509686464.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:04.553Z,1509686464.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:04.903Z,1509686464.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:05.314Z,1509686465.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:05.735Z,1509686465.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:06.102Z,1509686466.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:06.503Z,1509686466.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:06.914Z,1509686466.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:07.068Z,1509686467.068 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:21:07.069Z,1509686467.069 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T05:21:07.069Z,1509686467.069 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:21:07.311Z,1509686467.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:21:07.311Z,1509686467.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:07.416Z,1509686467.416 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:21:07.473Z,1509686467.473 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:21:07.678Z,1509686467.678 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:21:07.739Z,1509686467.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:21:07.740Z,1509686467.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:08.096Z,1509686468.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:21:08.097Z,1509686468.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:08.486Z,1509686468.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:21:08.487Z,1509686468.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:08.887Z,1509686468.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:21:08.889Z,1509686468.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:08.989Z,1509686468.989 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:21:08.989Z,1509686468.989 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T05:21:09.293Z,1509686469.293 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:21:09.293Z,1509686469.293 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:21:09.293Z,1509686469.293 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:21:09.293Z,1509686469.293 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:21:09.352Z,1509686469.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:21:09.353Z,1509686469.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:09.699Z,1509686469.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:21:09.700Z,1509686469.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:10.086Z,1509686470.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:21:10.087Z,1509686470.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:10.485Z,1509686470.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:21:10.486Z,1509686470.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:10.874Z,1509686470.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:21:10.875Z,1509686470.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:11.270Z,1509686471.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:21:11.271Z,1509686471.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:11.653Z,1509686471.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T05:21:11.654Z,1509686471.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:12.082Z,1509686472.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:21:12.097Z,1509686472.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:12.475Z,1509686472.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:21:12.477Z,1509686472.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:12.882Z,1509686472.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:21:12.882Z,1509686472.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:13.296Z,1509686473.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:21:13.297Z,1509686473.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:13.456Z,1509686473.456 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:21:13.515Z,1509686473.515 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:21:13.516Z,1509686473.516 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:21:13.517Z,1509686473.517 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:21:13.517Z,1509686473.517 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:21:13.702Z,1509686473.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:21:13.703Z,1509686473.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:14.109Z,1509686474.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:14.482Z,1509686474.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x15220 got:0x49152
2017-11-03T05:21:14.510Z,1509686474.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:14.882Z,1509686474.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:15.271Z,1509686475.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:15.697Z,1509686475.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:16.082Z,1509686476.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:16.493Z,1509686476.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:16.949Z,1509686476.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:17.313Z,1509686477.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:17.684Z,1509686477.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:18.070Z,1509686478.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:18.514Z,1509686478.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:18.955Z,1509686478.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:19.299Z,1509686479.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:19.699Z,1509686479.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:20.075Z,1509686480.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:20.486Z,1509686480.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:20.976Z,1509686480.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:21.281Z,1509686481.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:21.722Z,1509686481.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:22.122Z,1509686482.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:22.527Z,1509686482.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:22.937Z,1509686482.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:23.278Z,1509686483.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:23.656Z,1509686483.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:24.055Z,1509686484.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:24.458Z,1509686484.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:24.882Z,1509686484.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:25.295Z,1509686485.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:25.692Z,1509686485.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:26.060Z,1509686486.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:26.464Z,1509686486.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:26.859Z,1509686486.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:27.264Z,1509686487.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:27.690Z,1509686487.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:28.091Z,1509686488.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:28.495Z,1509686488.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:28.863Z,1509686488.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:29.269Z,1509686489.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:29.668Z,1509686489.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:30.065Z,1509686490.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:30.489Z,1509686490.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:30.890Z,1509686490.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:31.291Z,1509686491.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:31.699Z,1509686491.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:32.065Z,1509686492.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:32.468Z,1509686492.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:32.947Z,1509686492.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:33.269Z,1509686493.269 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T05:21:33.269Z,1509686493.269 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:21:33.269Z,1509686493.269 [BPC1](ERROR): Data Fault
2017-11-03T05:21:33.294Z,1509686493.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:33.381Z,1509686493.381 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:21:33.693Z,1509686493.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:34.092Z,1509686494.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:34.491Z,1509686494.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:34.584Z,1509686494.584 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:21:34.584Z,1509686494.584 [BPC1] No Fault, FailCount= 1
2017-11-03T05:21:35.007Z,1509686495.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:35.290Z,1509686495.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:35.703Z,1509686495.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:36.063Z,1509686496.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:36.459Z,1509686496.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:36.940Z,1509686496.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:37.294Z,1509686497.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:37.690Z,1509686497.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:38.091Z,1509686498.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:38.463Z,1509686498.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:38.860Z,1509686498.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:39.271Z,1509686499.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:39.676Z,1509686499.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:40.081Z,1509686500.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:40.480Z,1509686500.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:40.848Z,1509686500.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:41.271Z,1509686501.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:41.676Z,1509686501.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:42.057Z,1509686502.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:42.460Z,1509686502.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:42.888Z,1509686502.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:43.284Z,1509686503.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:43.687Z,1509686503.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:44.090Z,1509686504.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:44.455Z,1509686504.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:44.863Z,1509686504.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:45.287Z,1509686505.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:45.686Z,1509686505.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:46.142Z,1509686506.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:46.490Z,1509686506.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:46.581Z,1509686506.581 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T05:21:46.907Z,1509686506.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:47.263Z,1509686507.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:47.664Z,1509686507.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:48.106Z,1509686508.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:48.467Z,1509686508.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:48.938Z,1509686508.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:49.293Z,1509686509.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:49.739Z,1509686509.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:50.089Z,1509686510.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:50.495Z,1509686510.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:50.916Z,1509686510.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:51.263Z,1509686511.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:51.669Z,1509686511.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:52.092Z,1509686512.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:52.495Z,1509686512.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:52.859Z,1509686512.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:53.274Z,1509686513.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:53.670Z,1509686513.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:54.086Z,1509686514.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:54.473Z,1509686514.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:54.884Z,1509686514.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:58.229Z,1509686518.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:58.422Z,1509686518.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:58.786Z,1509686518.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:59.187Z,1509686519.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:59.592Z,1509686519.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:21:59.991Z,1509686519.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:00.389Z,1509686520.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:00.796Z,1509686520.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:01.218Z,1509686521.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:01.599Z,1509686521.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:01.973Z,1509686521.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:02.373Z,1509686522.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:02.807Z,1509686522.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:03.184Z,1509686523.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:03.623Z,1509686523.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:04.004Z,1509686524.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:04.423Z,1509686524.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:04.804Z,1509686524.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:05.175Z,1509686525.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:05.587Z,1509686525.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:05.983Z,1509686525.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:06.426Z,1509686526.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:06.787Z,1509686526.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:07.195Z,1509686527.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:07.591Z,1509686527.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:07.979Z,1509686527.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:08.375Z,1509686528.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:08.783Z,1509686528.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:09.215Z,1509686529.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:09.595Z,1509686529.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:09.988Z,1509686529.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:10.388Z,1509686530.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:10.775Z,1509686530.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:11.179Z,1509686531.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:11.587Z,1509686531.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:11.981Z,1509686531.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:12.387Z,1509686532.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:12.795Z,1509686532.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:13.194Z,1509686533.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:13.587Z,1509686533.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:13.979Z,1509686533.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:14.366Z,1509686534.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:14.381Z,1509686534.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:14.767Z,1509686534.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:14.787Z,1509686534.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:15.175Z,1509686535.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:15.190Z,1509686535.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:15.580Z,1509686535.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:15.645Z,1509686535.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:15.980Z,1509686535.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:15.995Z,1509686535.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:16.377Z,1509686536.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:16.392Z,1509686536.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:16.768Z,1509686536.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:16.783Z,1509686536.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:17.155Z,1509686537.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:17.211Z,1509686537.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:17.557Z,1509686537.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:17.572Z,1509686537.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:17.959Z,1509686537.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:17.987Z,1509686537.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:18.356Z,1509686538.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:18.411Z,1509686538.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:18.769Z,1509686538.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:18.791Z,1509686538.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:19.169Z,1509686539.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:19.219Z,1509686539.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:19.577Z,1509686539.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:19.627Z,1509686539.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:19.962Z,1509686539.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:19.978Z,1509686539.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:20.361Z,1509686540.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:20.375Z,1509686540.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:20.765Z,1509686540.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:20.780Z,1509686540.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:21.172Z,1509686541.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:21.187Z,1509686541.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:21.572Z,1509686541.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:21.588Z,1509686541.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:21.972Z,1509686541.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:21.987Z,1509686541.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:22.372Z,1509686542.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:22.387Z,1509686542.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:22.761Z,1509686542.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:22.775Z,1509686542.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:23.179Z,1509686543.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:23.223Z,1509686543.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:23.564Z,1509686543.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:23.580Z,1509686543.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:23.977Z,1509686543.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:23.992Z,1509686543.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:24.361Z,1509686544.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:24.381Z,1509686544.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:24.776Z,1509686544.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:24.791Z,1509686544.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:25.179Z,1509686545.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:25.199Z,1509686545.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:25.568Z,1509686545.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:25.591Z,1509686545.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:25.964Z,1509686545.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:25.986Z,1509686545.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:26.365Z,1509686546.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:26.380Z,1509686546.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:26.768Z,1509686546.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:26.783Z,1509686546.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:27.164Z,1509686547.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:27.180Z,1509686547.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:27.576Z,1509686547.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:27.592Z,1509686547.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:27.976Z,1509686547.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:27.991Z,1509686547.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:28.377Z,1509686548.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:28.392Z,1509686548.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:28.765Z,1509686548.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:28.781Z,1509686548.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:29.154Z,1509686549.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:29.190Z,1509686549.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:29.556Z,1509686549.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:29.588Z,1509686549.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:29.972Z,1509686549.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:29.987Z,1509686549.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:30.360Z,1509686550.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:30.375Z,1509686550.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:30.774Z,1509686550.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:30.805Z,1509686550.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:31.181Z,1509686551.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:31.197Z,1509686551.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:31.576Z,1509686551.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:31.638Z,1509686551.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:31.956Z,1509686551.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:31.971Z,1509686551.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:32.363Z,1509686552.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:32.377Z,1509686552.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:32.768Z,1509686552.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:32.783Z,1509686552.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:33.163Z,1509686553.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:33.183Z,1509686553.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:33.572Z,1509686553.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:33.587Z,1509686553.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:33.973Z,1509686553.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:33.988Z,1509686553.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:34.372Z,1509686554.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:34.387Z,1509686554.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:34.768Z,1509686554.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:34.776Z,1509686554.776 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:22:34.776Z,1509686554.776 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:22:34.776Z,1509686554.776 [BPC1](ERROR): Communications Fault
2017-11-03T05:22:34.784Z,1509686554.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:34.856Z,1509686554.856 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:22:35.163Z,1509686555.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:35.179Z,1509686555.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:35.567Z,1509686555.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:35.582Z,1509686555.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:35.967Z,1509686555.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:35.982Z,1509686555.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:36.061Z,1509686556.061 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:22:36.061Z,1509686556.061 [BPC1] No Fault, FailCount= 1
2017-11-03T05:22:36.361Z,1509686556.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:36.435Z,1509686556.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:36.777Z,1509686556.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:36.799Z,1509686556.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:37.197Z,1509686557.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:37.221Z,1509686557.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:37.577Z,1509686557.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:37.630Z,1509686557.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:37.967Z,1509686557.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:37.987Z,1509686557.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:38.368Z,1509686558.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:38.383Z,1509686558.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:38.771Z,1509686558.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:38.787Z,1509686558.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:38.787Z,1509686558.787 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 103
2017-11-03T05:22:38.787Z,1509686558.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:22:38.789Z,1509686558.789 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:38.789Z,1509686558.789 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 103
2017-11-03T05:22:38.789Z,1509686558.789 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:22:38.791Z,1509686558.791 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:38.791Z,1509686558.791 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103
2017-11-03T05:22:38.791Z,1509686558.791 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:22:38.865Z,1509686558.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:22:38.865Z,1509686558.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:22:38.865Z,1509686558.865 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:22:39.157Z,1509686559.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:39.264Z,1509686559.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:22:39.265Z,1509686559.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 103
2017-11-03T05:22:39.265Z,1509686559.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:22:39.265Z,1509686559.265 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 103
2017-11-03T05:22:39.265Z,1509686559.265 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:22:39.266Z,1509686559.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103
2017-11-03T05:22:39.590Z,1509686559.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:39.604Z,1509686559.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:22:39.605Z,1509686559.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:22:39.605Z,1509686559.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:22:39.605Z,1509686559.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:22:39.606Z,1509686559.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:22:39.606Z,1509686559.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:22:39.606Z,1509686559.606 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:22:39.607Z,1509686559.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:22:39.607Z,1509686559.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:22:39.985Z,1509686559.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:40.007Z,1509686560.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:40.379Z,1509686560.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:40.398Z,1509686560.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:40.760Z,1509686560.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:40.789Z,1509686560.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:41.152Z,1509686561.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:41.167Z,1509686561.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:41.567Z,1509686561.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:41.599Z,1509686561.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:41.961Z,1509686561.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:41.978Z,1509686561.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:42.368Z,1509686562.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:42.384Z,1509686562.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:42.772Z,1509686562.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:42.792Z,1509686562.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:43.171Z,1509686563.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:43.187Z,1509686563.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:43.570Z,1509686563.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:43.591Z,1509686563.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:43.955Z,1509686563.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:43.989Z,1509686563.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:44.356Z,1509686564.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:44.384Z,1509686564.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:44.754Z,1509686564.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:44.780Z,1509686564.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:45.160Z,1509686565.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:45.175Z,1509686565.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:45.570Z,1509686565.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:45.595Z,1509686565.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:45.969Z,1509686565.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:45.994Z,1509686565.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:46.369Z,1509686566.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:46.395Z,1509686566.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:46.756Z,1509686566.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:46.771Z,1509686566.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:47.163Z,1509686567.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:47.197Z,1509686567.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:47.556Z,1509686567.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:47.571Z,1509686567.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:47.958Z,1509686567.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:47.981Z,1509686567.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:48.367Z,1509686568.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:48.383Z,1509686568.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:48.776Z,1509686568.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:48.798Z,1509686568.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:49.177Z,1509686569.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:49.192Z,1509686569.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:49.576Z,1509686569.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:49.642Z,1509686569.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:49.965Z,1509686569.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:49.983Z,1509686569.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:50.365Z,1509686570.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:50.387Z,1509686570.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:50.767Z,1509686570.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:50.826Z,1509686570.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:51.191Z,1509686571.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:51.222Z,1509686571.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:51.579Z,1509686571.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:51.627Z,1509686571.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:51.980Z,1509686571.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:52.002Z,1509686572.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:52.373Z,1509686572.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:52.427Z,1509686572.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:52.766Z,1509686572.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:52.782Z,1509686572.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:53.168Z,1509686573.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:53.188Z,1509686573.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:53.555Z,1509686573.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:53.588Z,1509686573.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:53.966Z,1509686573.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:53.982Z,1509686573.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:54.366Z,1509686574.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:54.383Z,1509686574.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:54.776Z,1509686574.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:54.791Z,1509686574.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:55.181Z,1509686575.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:55.196Z,1509686575.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:58.354Z,1509686578.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:58.377Z,1509686578.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:58.503Z,1509686578.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:58.534Z,1509686578.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:58.938Z,1509686578.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:58.974Z,1509686578.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:59.308Z,1509686579.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:59.335Z,1509686579.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:22:59.726Z,1509686579.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:22:59.741Z,1509686579.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:00.128Z,1509686580.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:00.143Z,1509686580.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:00.526Z,1509686580.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:00.541Z,1509686580.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:00.946Z,1509686580.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:00.981Z,1509686580.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:01.307Z,1509686581.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:01.341Z,1509686581.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:01.704Z,1509686581.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:01.739Z,1509686581.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:02.104Z,1509686582.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:02.119Z,1509686582.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:02.518Z,1509686582.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:02.545Z,1509686582.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:02.946Z,1509686582.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:03.010Z,1509686583.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:03.322Z,1509686583.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:03.330Z,1509686583.330 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T05:23:03.331Z,1509686583.331 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:23:03.331Z,1509686583.331 [BPC1](ERROR): Data Fault
2017-11-03T05:23:03.363Z,1509686583.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:03.453Z,1509686583.453 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:23:03.717Z,1509686583.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:03.733Z,1509686583.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:04.114Z,1509686584.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:04.130Z,1509686584.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:04.518Z,1509686584.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:04.533Z,1509686584.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:04.648Z,1509686584.648 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:23:04.648Z,1509686584.648 [BPC1] No Fault, FailCount= 1
2017-11-03T05:23:04.922Z,1509686584.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:05.001Z,1509686585.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:05.317Z,1509686585.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:05.333Z,1509686585.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:05.714Z,1509686585.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:05.756Z,1509686585.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:06.115Z,1509686586.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:06.131Z,1509686586.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:06.518Z,1509686586.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:06.533Z,1509686586.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:06.921Z,1509686586.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:06.937Z,1509686586.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:07.318Z,1509686587.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:07.333Z,1509686587.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:07.712Z,1509686587.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:07.732Z,1509686587.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:08.114Z,1509686588.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:08.135Z,1509686588.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:08.522Z,1509686588.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:08.537Z,1509686588.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:08.920Z,1509686588.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:08.943Z,1509686588.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:09.322Z,1509686589.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:09.342Z,1509686589.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:09.458Z,1509686589.458 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:23:09.458Z,1509686589.458 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T05:23:09.458Z,1509686589.458 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:23:09.509Z,1509686589.509 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:23:09.717Z,1509686589.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:09.732Z,1509686589.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:23:09.733Z,1509686589.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:09.860Z,1509686589.860 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:23:09.950Z,1509686589.950 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:23:10.113Z,1509686590.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:10.130Z,1509686590.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:23:10.131Z,1509686590.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:10.520Z,1509686590.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:10.535Z,1509686590.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:23:10.536Z,1509686590.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:10.922Z,1509686590.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:10.937Z,1509686590.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:23:10.938Z,1509686590.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:11.322Z,1509686591.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:11.338Z,1509686591.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:23:11.338Z,1509686591.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:11.437Z,1509686591.437 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:23:11.437Z,1509686591.437 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T05:23:11.565Z,1509686591.565 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:23:11.565Z,1509686591.565 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:23:11.565Z,1509686591.565 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:23:11.565Z,1509686591.565 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:23:11.712Z,1509686591.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:11.734Z,1509686591.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:23:11.735Z,1509686591.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:12.117Z,1509686592.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:12.132Z,1509686592.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:23:12.133Z,1509686592.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:12.522Z,1509686592.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:12.537Z,1509686592.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:23:12.538Z,1509686592.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:12.920Z,1509686592.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:12.935Z,1509686592.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:23:12.935Z,1509686592.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:13.322Z,1509686593.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:13.336Z,1509686593.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:23:13.337Z,1509686593.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:13.716Z,1509686593.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:13.731Z,1509686593.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:23:13.732Z,1509686593.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:14.114Z,1509686594.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:14.129Z,1509686594.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:23:14.130Z,1509686594.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:14.522Z,1509686594.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:14.537Z,1509686594.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:23:14.538Z,1509686594.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:14.922Z,1509686594.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:14.937Z,1509686594.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:23:14.938Z,1509686594.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:15.320Z,1509686595.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:15.335Z,1509686595.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:23:15.335Z,1509686595.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:15.723Z,1509686595.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:15.752Z,1509686595.752 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:23:15.793Z,1509686595.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T05:23:15.794Z,1509686595.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:15.875Z,1509686595.875 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:23:15.876Z,1509686595.876 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:23:15.877Z,1509686595.877 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:23:15.877Z,1509686595.877 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:23:16.140Z,1509686596.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:16.167Z,1509686596.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:23:16.169Z,1509686596.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:16.520Z,1509686596.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:16.570Z,1509686596.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:16.927Z,1509686596.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:16.943Z,1509686596.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:17.329Z,1509686597.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:17.398Z,1509686597.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:17.705Z,1509686597.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:17.759Z,1509686597.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:18.105Z,1509686598.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:18.137Z,1509686598.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:18.530Z,1509686598.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:18.590Z,1509686598.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:18.930Z,1509686598.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:18.945Z,1509686598.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:19.318Z,1509686599.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:19.386Z,1509686599.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:19.708Z,1509686599.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:19.755Z,1509686599.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:20.103Z,1509686600.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:20.143Z,1509686600.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:20.518Z,1509686600.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:20.551Z,1509686600.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:20.930Z,1509686600.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:20.946Z,1509686600.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:21.312Z,1509686601.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:21.346Z,1509686601.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:21.708Z,1509686601.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:21.740Z,1509686601.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:22.107Z,1509686602.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:22.123Z,1509686602.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:22.522Z,1509686602.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:22.551Z,1509686602.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:22.918Z,1509686602.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:22.949Z,1509686602.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:23.318Z,1509686603.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:23.348Z,1509686603.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:23.715Z,1509686603.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:23.749Z,1509686603.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:24.115Z,1509686604.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:24.147Z,1509686604.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:24.522Z,1509686604.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:24.553Z,1509686604.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:24.921Z,1509686604.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:24.952Z,1509686604.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:25.322Z,1509686605.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:25.353Z,1509686605.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:25.709Z,1509686605.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:25.725Z,1509686605.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:26.115Z,1509686606.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:26.153Z,1509686606.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:26.526Z,1509686606.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:26.551Z,1509686606.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:26.926Z,1509686606.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:26.948Z,1509686606.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:27.322Z,1509686607.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:27.350Z,1509686607.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:27.712Z,1509686607.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:27.728Z,1509686607.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:28.119Z,1509686608.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:28.158Z,1509686608.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:28.530Z,1509686608.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:28.559Z,1509686608.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:28.918Z,1509686608.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:28.949Z,1509686608.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:29.322Z,1509686609.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:29.350Z,1509686609.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:29.712Z,1509686609.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:29.727Z,1509686609.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:30.151Z,1509686610.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:30.203Z,1509686610.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:30.533Z,1509686610.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:30.555Z,1509686610.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:30.927Z,1509686610.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:30.936Z,1509686610.936 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T05:23:30.936Z,1509686610.936 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:23:30.936Z,1509686610.936 [BPC1](ERROR): Data Fault
2017-11-03T05:23:30.944Z,1509686610.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:31.032Z,1509686611.032 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:23:31.332Z,1509686611.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:31.348Z,1509686611.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:31.709Z,1509686611.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:31.743Z,1509686611.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:32.104Z,1509686612.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:32.134Z,1509686612.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:32.225Z,1509686612.225 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:23:32.225Z,1509686612.225 [BPC1] No Fault, FailCount= 1
2017-11-03T05:23:32.541Z,1509686612.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:32.620Z,1509686612.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:32.929Z,1509686612.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:32.944Z,1509686612.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:33.329Z,1509686613.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:33.375Z,1509686613.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:33.709Z,1509686613.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:33.739Z,1509686613.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:34.108Z,1509686614.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:34.143Z,1509686614.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:34.529Z,1509686614.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:34.545Z,1509686614.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:34.926Z,1509686614.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:34.949Z,1509686614.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:35.327Z,1509686615.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:35.344Z,1509686615.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:35.705Z,1509686615.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:35.734Z,1509686615.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:36.103Z,1509686616.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:36.135Z,1509686616.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:36.526Z,1509686616.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:36.545Z,1509686616.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:36.926Z,1509686616.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:36.941Z,1509686616.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:37.331Z,1509686617.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:37.346Z,1509686617.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:37.708Z,1509686617.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:37.739Z,1509686617.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:38.105Z,1509686618.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:38.139Z,1509686618.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:38.528Z,1509686618.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:38.546Z,1509686618.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:38.930Z,1509686618.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:38.946Z,1509686618.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:39.326Z,1509686619.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:39.340Z,1509686619.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:39.707Z,1509686619.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:39.734Z,1509686619.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:40.103Z,1509686620.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:40.135Z,1509686620.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:40.527Z,1509686620.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:40.543Z,1509686620.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:40.930Z,1509686620.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:40.945Z,1509686620.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:41.326Z,1509686621.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:41.342Z,1509686621.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:41.703Z,1509686621.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:41.738Z,1509686621.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:42.125Z,1509686622.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:42.140Z,1509686622.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:42.526Z,1509686622.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:42.545Z,1509686622.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:42.924Z,1509686622.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:42.947Z,1509686622.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:43.330Z,1509686623.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:43.345Z,1509686623.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:43.708Z,1509686623.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:43.742Z,1509686623.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:44.153Z,1509686624.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:44.201Z,1509686624.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:44.531Z,1509686624.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:44.546Z,1509686624.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:44.926Z,1509686624.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:44.941Z,1509686624.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:45.326Z,1509686625.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:45.359Z,1509686625.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:45.708Z,1509686625.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:45.760Z,1509686625.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:46.108Z,1509686626.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:46.141Z,1509686626.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:46.521Z,1509686626.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:46.589Z,1509686626.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:46.933Z,1509686626.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:46.948Z,1509686626.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:47.318Z,1509686627.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:47.375Z,1509686627.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:47.709Z,1509686627.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:47.751Z,1509686627.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:48.111Z,1509686628.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:48.147Z,1509686628.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:48.531Z,1509686628.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:48.546Z,1509686628.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:48.918Z,1509686628.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:48.942Z,1509686628.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:49.321Z,1509686629.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:49.346Z,1509686629.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:49.707Z,1509686629.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:49.723Z,1509686629.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:50.123Z,1509686630.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:50.142Z,1509686630.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:50.526Z,1509686630.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:50.541Z,1509686630.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:50.926Z,1509686630.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:50.941Z,1509686630.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:51.325Z,1509686631.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:51.346Z,1509686631.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:51.716Z,1509686631.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:51.731Z,1509686631.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:52.120Z,1509686632.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:52.135Z,1509686632.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:52.525Z,1509686632.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:52.540Z,1509686632.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:52.926Z,1509686632.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:52.941Z,1509686632.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:53.326Z,1509686633.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:53.341Z,1509686633.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:53.714Z,1509686633.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:53.734Z,1509686633.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:54.113Z,1509686634.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:54.139Z,1509686634.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:54.526Z,1509686634.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:54.541Z,1509686634.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:54.925Z,1509686634.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:54.941Z,1509686634.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:55.330Z,1509686635.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:55.347Z,1509686635.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:58.606Z,1509686638.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:58.631Z,1509686638.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:58.752Z,1509686638.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:58.787Z,1509686638.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:59.179Z,1509686639.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:59.199Z,1509686639.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:59.578Z,1509686639.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:23:59.638Z,1509686639.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:23:59.975Z,1509686639.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:00.047Z,1509686640.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:00.355Z,1509686640.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:00.436Z,1509686640.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:00.752Z,1509686640.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:00.803Z,1509686640.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:01.155Z,1509686641.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:01.171Z,1509686641.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:01.565Z,1509686641.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:01.607Z,1509686641.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:01.965Z,1509686641.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:01.997Z,1509686641.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:02.369Z,1509686642.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:02.495Z,1509686642.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:02.756Z,1509686642.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:02.771Z,1509686642.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:03.152Z,1509686643.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:03.167Z,1509686643.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:03.551Z,1509686643.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:03.566Z,1509686643.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:03.960Z,1509686643.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:03.975Z,1509686643.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:04.357Z,1509686644.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:04.372Z,1509686644.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:04.770Z,1509686644.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:04.801Z,1509686644.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:05.169Z,1509686645.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:05.184Z,1509686645.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:05.569Z,1509686645.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:05.601Z,1509686645.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:05.963Z,1509686645.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:05.983Z,1509686645.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:06.357Z,1509686646.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:06.371Z,1509686646.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:06.760Z,1509686646.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:06.775Z,1509686646.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:07.160Z,1509686647.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:07.175Z,1509686647.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:07.573Z,1509686647.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:07.603Z,1509686647.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:07.977Z,1509686647.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:08.000Z,1509686648.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:08.365Z,1509686648.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:08.381Z,1509686648.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:08.759Z,1509686648.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:08.774Z,1509686648.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:09.161Z,1509686649.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:09.176Z,1509686649.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:09.559Z,1509686649.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:09.574Z,1509686649.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:09.981Z,1509686649.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:10.024Z,1509686650.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:10.358Z,1509686650.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:10.377Z,1509686650.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:10.766Z,1509686650.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:10.783Z,1509686650.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:11.161Z,1509686651.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:11.176Z,1509686651.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:11.573Z,1509686651.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:11.603Z,1509686651.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:11.958Z,1509686651.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:11.976Z,1509686651.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:12.359Z,1509686652.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:12.374Z,1509686652.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:12.760Z,1509686652.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:12.775Z,1509686652.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:13.159Z,1509686653.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:13.174Z,1509686653.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:13.565Z,1509686653.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:13.602Z,1509686653.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:13.974Z,1509686653.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:14.001Z,1509686654.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:14.365Z,1509686654.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:14.474Z,1509686654.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:14.748Z,1509686654.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:14.795Z,1509686654.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:15.161Z,1509686655.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:15.177Z,1509686655.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:15.560Z,1509686655.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:15.615Z,1509686655.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:15.950Z,1509686655.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:15.975Z,1509686655.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:16.361Z,1509686656.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:16.463Z,1509686656.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:16.773Z,1509686656.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:16.826Z,1509686656.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:17.176Z,1509686657.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:17.191Z,1509686657.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:17.573Z,1509686657.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:17.588Z,1509686657.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:17.951Z,1509686657.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:17.982Z,1509686657.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:18.364Z,1509686658.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:18.379Z,1509686658.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:18.763Z,1509686658.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:18.783Z,1509686658.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:19.160Z,1509686659.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:19.187Z,1509686659.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:19.568Z,1509686659.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:19.583Z,1509686659.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:19.978Z,1509686659.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:19.993Z,1509686659.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:20.373Z,1509686660.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:20.388Z,1509686660.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:20.761Z,1509686660.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:20.782Z,1509686660.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:21.163Z,1509686661.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:21.178Z,1509686661.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:21.562Z,1509686661.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:21.583Z,1509686661.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:21.968Z,1509686661.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:21.985Z,1509686661.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:22.362Z,1509686662.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:22.377Z,1509686662.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:22.773Z,1509686662.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:22.788Z,1509686662.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:23.170Z,1509686663.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:23.185Z,1509686663.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:23.573Z,1509686663.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:23.588Z,1509686663.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:23.983Z,1509686663.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:24.023Z,1509686664.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:24.363Z,1509686664.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:24.379Z,1509686664.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:24.761Z,1509686664.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:24.777Z,1509686664.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:25.160Z,1509686665.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:25.183Z,1509686665.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:25.569Z,1509686665.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:25.584Z,1509686665.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:25.973Z,1509686665.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:25.988Z,1509686665.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:26.370Z,1509686666.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:26.385Z,1509686666.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:26.763Z,1509686666.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:26.778Z,1509686666.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:27.162Z,1509686667.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:27.177Z,1509686667.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:27.560Z,1509686667.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:27.582Z,1509686667.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:27.966Z,1509686667.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:27.981Z,1509686667.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:28.352Z,1509686668.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:28.485Z,1509686668.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:28.774Z,1509686668.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:28.789Z,1509686668.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:29.174Z,1509686669.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:29.239Z,1509686669.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:29.566Z,1509686669.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:29.591Z,1509686669.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:29.953Z,1509686669.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:29.969Z,1509686669.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:30.353Z,1509686670.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:30.426Z,1509686670.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:30.751Z,1509686670.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:30.783Z,1509686670.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:31.160Z,1509686671.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:31.218Z,1509686671.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:31.569Z,1509686671.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:31.614Z,1509686671.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:31.970Z,1509686671.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:31.985Z,1509686671.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:32.365Z,1509686672.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:32.381Z,1509686672.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:32.764Z,1509686672.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:32.780Z,1509686672.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:33.158Z,1509686673.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:33.179Z,1509686673.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:33.561Z,1509686673.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:33.576Z,1509686673.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:33.971Z,1509686673.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:33.987Z,1509686673.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:34.365Z,1509686674.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:34.380Z,1509686674.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:34.766Z,1509686674.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:34.782Z,1509686674.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:35.167Z,1509686675.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:35.181Z,1509686675.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:35.566Z,1509686675.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:35.581Z,1509686675.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:35.967Z,1509686675.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:35.982Z,1509686675.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:36.360Z,1509686676.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:36.382Z,1509686676.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:36.763Z,1509686676.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:36.779Z,1509686676.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:37.161Z,1509686677.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:37.176Z,1509686677.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:37.570Z,1509686677.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:37.585Z,1509686677.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:38.008Z,1509686678.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:38.023Z,1509686678.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:38.366Z,1509686678.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:38.382Z,1509686678.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:38.762Z,1509686678.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:38.778Z,1509686678.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:39.159Z,1509686679.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:39.176Z,1509686679.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:39.560Z,1509686679.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:39.575Z,1509686679.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:39.960Z,1509686679.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:39.976Z,1509686679.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:40.362Z,1509686680.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:40.377Z,1509686680.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:40.766Z,1509686680.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:40.781Z,1509686680.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:41.165Z,1509686681.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:41.180Z,1509686681.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:41.566Z,1509686681.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:41.581Z,1509686681.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:41.960Z,1509686681.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:41.976Z,1509686681.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:42.363Z,1509686682.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:42.440Z,1509686682.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:42.763Z,1509686682.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:42.783Z,1509686682.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:43.160Z,1509686683.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:43.175Z,1509686683.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:43.566Z,1509686683.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:43.639Z,1509686683.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:43.975Z,1509686683.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:43.999Z,1509686683.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:44.372Z,1509686684.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:44.480Z,1509686684.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:44.763Z,1509686684.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:44.778Z,1509686684.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:45.149Z,1509686685.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:45.218Z,1509686685.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:45.561Z,1509686685.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:45.616Z,1509686685.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:45.952Z,1509686685.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:45.985Z,1509686685.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:46.362Z,1509686686.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:46.377Z,1509686686.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:46.776Z,1509686686.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:46.799Z,1509686686.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:47.173Z,1509686687.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:47.188Z,1509686687.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:47.576Z,1509686687.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:47.598Z,1509686687.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:47.951Z,1509686687.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:47.983Z,1509686687.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:48.361Z,1509686688.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:48.380Z,1509686688.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:48.763Z,1509686688.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:48.783Z,1509686688.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:49.161Z,1509686689.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:49.179Z,1509686689.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:49.569Z,1509686689.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:49.584Z,1509686689.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:49.974Z,1509686689.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:49.995Z,1509686689.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:50.373Z,1509686690.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:50.388Z,1509686690.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:50.761Z,1509686690.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:50.781Z,1509686690.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:51.149Z,1509686691.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:51.183Z,1509686691.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:51.561Z,1509686691.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:51.578Z,1509686691.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:51.995Z,1509686691.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:52.030Z,1509686692.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:52.349Z,1509686692.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:52.375Z,1509686692.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:52.776Z,1509686692.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:52.791Z,1509686692.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:53.173Z,1509686693.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:53.194Z,1509686693.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:53.576Z,1509686693.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:53.591Z,1509686693.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:53.961Z,1509686693.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:53.979Z,1509686693.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:54.351Z,1509686694.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:54.378Z,1509686694.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:54.381Z,1509686694.381 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T05:24:54.381Z,1509686694.381 [Default:CheckIn:C.Wait] Stopped
2017-11-03T05:24:54.381Z,1509686694.381 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T05:24:54.381Z,1509686694.381 [Default:CheckIn:D] Running Loop=1
2017-11-03T05:24:54.763Z,1509686694.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:54.779Z,1509686694.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:54.782Z,1509686694.782 [Default:CheckIn:D] Stopped
2017-11-03T05:24:54.782Z,1509686694.782 [Default:CheckIn:E] Running Loop=1
2017-11-03T05:24:55.162Z,1509686695.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:55.177Z,1509686695.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:55.180Z,1509686695.180 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 309.786914 min 
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn:E] Stopped
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn] Stopped
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn](INFO): Running loop #31
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn] Running Loop=31
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T05:24:55.181Z,1509686695.181 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T05:24:55.570Z,1509686695.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:55.593Z,1509686695.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:58.884Z,1509686698.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:58.959Z,1509686698.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:59.106Z,1509686699.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:59.150Z,1509686699.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:59.489Z,1509686699.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:59.530Z,1509686699.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:24:59.934Z,1509686699.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:24:59.950Z,1509686699.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:00.288Z,1509686700.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:00.342Z,1509686700.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:00.702Z,1509686700.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:00.750Z,1509686700.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:01.102Z,1509686701.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:01.131Z,1509686701.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:01.502Z,1509686701.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:01.533Z,1509686701.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:01.922Z,1509686701.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:01.952Z,1509686701.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:02.289Z,1509686702.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:02.304Z,1509686702.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:02.689Z,1509686702.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:02.711Z,1509686702.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:03.088Z,1509686703.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:03.103Z,1509686703.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:03.502Z,1509686703.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:03.530Z,1509686703.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:03.923Z,1509686703.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:03.958Z,1509686703.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:04.302Z,1509686704.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:04.332Z,1509686704.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:04.689Z,1509686704.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:04.705Z,1509686704.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:05.089Z,1509686705.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:05.104Z,1509686705.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:05.501Z,1509686705.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:05.531Z,1509686705.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:05.927Z,1509686705.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:05.993Z,1509686705.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:06.302Z,1509686706.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:06.334Z,1509686706.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:06.690Z,1509686706.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:06.711Z,1509686706.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:07.089Z,1509686707.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:07.105Z,1509686707.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:07.502Z,1509686707.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:07.532Z,1509686707.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:07.902Z,1509686707.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:07.930Z,1509686707.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:08.306Z,1509686708.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:08.329Z,1509686708.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:08.689Z,1509686708.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:08.705Z,1509686708.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:09.088Z,1509686709.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:09.103Z,1509686709.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:09.502Z,1509686709.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:09.533Z,1509686709.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:09.902Z,1509686709.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:09.934Z,1509686709.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:10.302Z,1509686710.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:10.333Z,1509686710.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:10.686Z,1509686710.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:10.713Z,1509686710.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:11.092Z,1509686711.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:11.108Z,1509686711.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:11.505Z,1509686711.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:11.520Z,1509686711.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:11.901Z,1509686711.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:11.917Z,1509686711.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:12.048Z,1509686712.048 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:25:12.049Z,1509686712.049 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T05:25:12.049Z,1509686712.049 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:25:12.304Z,1509686712.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:12.319Z,1509686712.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:25:12.320Z,1509686712.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:12.427Z,1509686712.427 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:25:12.453Z,1509686712.453 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:25:12.554Z,1509686712.554 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:25:12.693Z,1509686712.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:12.744Z,1509686712.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:25:12.745Z,1509686712.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:13.084Z,1509686713.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:13.139Z,1509686713.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:25:13.141Z,1509686713.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:13.506Z,1509686713.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:13.521Z,1509686713.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:25:13.522Z,1509686713.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:13.911Z,1509686713.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:13.926Z,1509686713.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:25:13.927Z,1509686713.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:14.020Z,1509686714.020 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:25:14.021Z,1509686714.021 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T05:25:14.168Z,1509686714.168 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:25:14.169Z,1509686714.169 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:25:14.169Z,1509686714.169 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:25:14.169Z,1509686714.169 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:25:14.306Z,1509686714.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:14.370Z,1509686714.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-03T05:25:14.371Z,1509686714.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:14.688Z,1509686714.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:14.718Z,1509686714.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:25:14.719Z,1509686714.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:15.087Z,1509686715.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:15.131Z,1509686715.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:25:15.132Z,1509686715.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:15.497Z,1509686715.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:15.526Z,1509686715.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:25:15.527Z,1509686715.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:15.905Z,1509686715.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:15.966Z,1509686715.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T05:25:15.967Z,1509686715.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:16.297Z,1509686716.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:16.321Z,1509686716.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:25:16.322Z,1509686716.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:16.686Z,1509686716.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:16.716Z,1509686716.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:25:16.717Z,1509686716.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:17.085Z,1509686717.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:17.126Z,1509686717.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:25:17.127Z,1509686717.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:17.501Z,1509686717.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:17.530Z,1509686717.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:25:17.531Z,1509686717.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:17.898Z,1509686717.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:17.928Z,1509686717.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:25:17.929Z,1509686717.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:18.304Z,1509686718.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:18.340Z,1509686718.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:25:18.345Z,1509686718.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:18.354Z,1509686718.354 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:25:18.491Z,1509686718.491 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:25:18.492Z,1509686718.492 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:25:18.493Z,1509686718.493 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:25:18.493Z,1509686718.493 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:25:18.708Z,1509686718.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:18.724Z,1509686718.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:25:18.725Z,1509686718.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:19.095Z,1509686719.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:19.111Z,1509686719.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:19.504Z,1509686719.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:19.519Z,1509686719.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:19.904Z,1509686719.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:19.926Z,1509686719.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:20.301Z,1509686720.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:20.316Z,1509686720.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:20.695Z,1509686720.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:20.715Z,1509686720.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:21.093Z,1509686721.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:21.108Z,1509686721.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:21.501Z,1509686721.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:21.516Z,1509686721.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:21.904Z,1509686721.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:21.919Z,1509686721.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:22.304Z,1509686722.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:22.319Z,1509686722.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:22.693Z,1509686722.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:22.709Z,1509686722.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:23.092Z,1509686723.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:23.107Z,1509686723.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:23.501Z,1509686723.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:23.516Z,1509686723.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:23.901Z,1509686723.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:23.916Z,1509686723.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:24.304Z,1509686724.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:24.320Z,1509686724.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:24.694Z,1509686724.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:24.710Z,1509686724.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:25.100Z,1509686725.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:25.116Z,1509686725.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:25.511Z,1509686725.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:25.531Z,1509686725.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:25.904Z,1509686725.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:25.920Z,1509686725.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:26.304Z,1509686726.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:26.319Z,1509686726.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:26.694Z,1509686726.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:26.709Z,1509686726.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:27.090Z,1509686727.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:27.105Z,1509686727.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:27.504Z,1509686727.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:27.519Z,1509686727.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:27.913Z,1509686727.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:27.995Z,1509686727.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:28.309Z,1509686728.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:28.324Z,1509686728.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:28.685Z,1509686728.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:28.719Z,1509686728.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:29.087Z,1509686729.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:29.149Z,1509686729.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:29.509Z,1509686729.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:29.524Z,1509686729.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:29.926Z,1509686729.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:29.971Z,1509686729.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:30.304Z,1509686730.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:30.359Z,1509686730.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:30.686Z,1509686730.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:30.712Z,1509686730.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:31.087Z,1509686731.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:31.112Z,1509686731.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:31.505Z,1509686731.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:31.520Z,1509686731.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:31.929Z,1509686731.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:31.951Z,1509686731.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:32.305Z,1509686732.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:32.320Z,1509686732.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:32.687Z,1509686732.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:32.713Z,1509686732.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:33.087Z,1509686733.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:33.112Z,1509686733.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:33.509Z,1509686733.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:33.524Z,1509686733.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:33.917Z,1509686733.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:33.936Z,1509686733.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:34.306Z,1509686734.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:34.321Z,1509686734.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:34.684Z,1509686734.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:34.717Z,1509686734.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:35.083Z,1509686735.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:35.114Z,1509686735.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:35.505Z,1509686735.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:35.520Z,1509686735.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:35.954Z,1509686735.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:35.975Z,1509686735.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:36.305Z,1509686736.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:36.320Z,1509686736.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:36.696Z,1509686736.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:36.719Z,1509686736.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:37.095Z,1509686737.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:37.115Z,1509686737.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:37.505Z,1509686737.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:37.520Z,1509686737.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:37.908Z,1509686737.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:37.930Z,1509686737.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:38.301Z,1509686738.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:38.316Z,1509686738.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:38.693Z,1509686738.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:38.709Z,1509686738.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:39.095Z,1509686739.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:39.110Z,1509686739.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:39.506Z,1509686739.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:39.521Z,1509686739.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:39.903Z,1509686739.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:39.922Z,1509686739.922 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:39.923Z,1509686739.923 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 104
2017-11-03T05:25:39.923Z,1509686739.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:25:39.925Z,1509686739.925 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:39.925Z,1509686739.925 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 104
2017-11-03T05:25:39.925Z,1509686739.925 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:25:39.927Z,1509686739.927 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:39.927Z,1509686739.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104
2017-11-03T05:25:39.927Z,1509686739.927 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:25:40.001Z,1509686740.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:25:40.001Z,1509686740.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:25:40.001Z,1509686740.001 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:25:40.313Z,1509686740.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:40.415Z,1509686740.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:25:40.415Z,1509686740.415 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 104
2017-11-03T05:25:40.416Z,1509686740.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:25:40.417Z,1509686740.417 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 104
2017-11-03T05:25:40.417Z,1509686740.417 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:25:40.417Z,1509686740.417 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104
2017-11-03T05:25:40.685Z,1509686740.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:40.721Z,1509686740.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:25:40.722Z,1509686740.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:25:40.722Z,1509686740.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:25:40.722Z,1509686740.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:25:40.723Z,1509686740.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:25:40.723Z,1509686740.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:25:40.723Z,1509686740.723 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:25:40.724Z,1509686740.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:25:40.724Z,1509686740.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:25:41.083Z,1509686741.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:41.119Z,1509686741.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:41.509Z,1509686741.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:41.518Z,1509686741.518 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T05:25:41.518Z,1509686741.518 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:25:41.518Z,1509686741.518 [BPC1](ERROR): Data Fault
2017-11-03T05:25:41.526Z,1509686741.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:41.608Z,1509686741.608 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:25:41.911Z,1509686741.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:41.926Z,1509686741.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:42.298Z,1509686742.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:42.333Z,1509686742.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:42.683Z,1509686742.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:42.728Z,1509686742.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:42.812Z,1509686742.812 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:25:42.812Z,1509686742.812 [BPC1] No Fault, FailCount= 1
2017-11-03T05:25:43.082Z,1509686743.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:43.167Z,1509686743.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:43.498Z,1509686743.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:43.524Z,1509686743.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:43.933Z,1509686743.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:43.979Z,1509686743.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:44.298Z,1509686744.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:44.325Z,1509686744.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:44.689Z,1509686744.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:44.704Z,1509686744.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:45.086Z,1509686745.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:45.101Z,1509686745.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:45.497Z,1509686745.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:45.533Z,1509686745.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:45.909Z,1509686745.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:45.944Z,1509686745.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:46.303Z,1509686746.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:46.334Z,1509686746.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:46.685Z,1509686746.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:46.701Z,1509686746.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:47.088Z,1509686747.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:47.107Z,1509686747.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:47.501Z,1509686747.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:47.538Z,1509686747.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:47.945Z,1509686747.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:47.983Z,1509686747.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:48.306Z,1509686748.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:48.335Z,1509686748.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:48.694Z,1509686748.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:48.709Z,1509686748.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:49.088Z,1509686749.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:49.104Z,1509686749.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:49.497Z,1509686749.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:49.536Z,1509686749.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:49.900Z,1509686749.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:49.967Z,1509686749.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:50.300Z,1509686750.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:50.315Z,1509686750.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:50.695Z,1509686750.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:50.710Z,1509686750.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:51.093Z,1509686751.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:51.107Z,1509686751.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:51.500Z,1509686751.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:51.515Z,1509686751.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:51.901Z,1509686751.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:51.917Z,1509686751.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:52.313Z,1509686752.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:52.345Z,1509686752.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:52.691Z,1509686752.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:52.706Z,1509686752.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:53.092Z,1509686753.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:53.107Z,1509686753.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:53.502Z,1509686753.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:53.517Z,1509686753.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:53.901Z,1509686753.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:53.917Z,1509686753.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:54.299Z,1509686754.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:54.319Z,1509686754.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:54.696Z,1509686754.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:54.710Z,1509686754.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:55.091Z,1509686755.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:55.111Z,1509686755.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:55.500Z,1509686755.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:55.515Z,1509686755.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:25:55.901Z,1509686755.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:25:55.988Z,1509686755.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:01.574Z,1509686761.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:01.612Z,1509686761.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:01.761Z,1509686761.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:01.781Z,1509686761.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:02.131Z,1509686762.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:02.158Z,1509686762.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:02.535Z,1509686762.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:02.598Z,1509686762.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:02.934Z,1509686762.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:03.005Z,1509686763.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:03.352Z,1509686763.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:03.399Z,1509686763.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:03.752Z,1509686763.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:03.811Z,1509686763.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:04.152Z,1509686764.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:04.182Z,1509686764.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:04.557Z,1509686764.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:04.585Z,1509686764.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:04.934Z,1509686764.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:04.975Z,1509686764.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:05.351Z,1509686765.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:05.400Z,1509686765.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:05.743Z,1509686765.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:05.817Z,1509686765.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:06.182Z,1509686766.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:06.230Z,1509686766.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:06.574Z,1509686766.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:06.603Z,1509686766.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:06.956Z,1509686766.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:07.005Z,1509686767.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:07.353Z,1509686767.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:07.417Z,1509686767.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:07.751Z,1509686767.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:07.804Z,1509686767.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:08.144Z,1509686768.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:08.169Z,1509686768.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:08.553Z,1509686768.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:08.573Z,1509686768.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:08.956Z,1509686768.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:08.985Z,1509686768.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:09.358Z,1509686769.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:09.383Z,1509686769.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:09.737Z,1509686769.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:09.780Z,1509686769.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:10.133Z,1509686770.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:10.179Z,1509686770.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:10.553Z,1509686770.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:10.583Z,1509686770.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:10.949Z,1509686770.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:10.989Z,1509686770.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:11.343Z,1509686771.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:11.385Z,1509686771.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:11.734Z,1509686771.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:11.787Z,1509686771.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:12.133Z,1509686772.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:12.185Z,1509686772.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:12.542Z,1509686772.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:12.580Z,1509686772.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:12.954Z,1509686772.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:12.970Z,1509686772.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:13.357Z,1509686773.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:13.373Z,1509686773.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:13.735Z,1509686773.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:13.761Z,1509686773.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:14.132Z,1509686774.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:14.158Z,1509686774.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:14.533Z,1509686774.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:14.559Z,1509686774.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:14.934Z,1509686774.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:14.960Z,1509686774.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:15.333Z,1509686775.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:15.359Z,1509686775.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:15.773Z,1509686775.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:15.898Z,1509686775.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:16.154Z,1509686776.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:16.170Z,1509686776.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:16.550Z,1509686776.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:16.635Z,1509686776.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:16.933Z,1509686776.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:16.964Z,1509686776.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:17.335Z,1509686777.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:17.390Z,1509686777.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:17.730Z,1509686777.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:17.771Z,1509686777.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:18.136Z,1509686778.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:18.167Z,1509686778.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:18.545Z,1509686778.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:18.572Z,1509686778.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:18.945Z,1509686778.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:18.973Z,1509686778.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:19.349Z,1509686779.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:19.379Z,1509686779.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:19.733Z,1509686779.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:19.748Z,1509686779.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:20.189Z,1509686780.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:20.231Z,1509686780.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:20.533Z,1509686780.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:20.548Z,1509686780.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:20.936Z,1509686780.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:20.974Z,1509686780.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:21.329Z,1509686781.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:21.344Z,1509686781.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:21.749Z,1509686781.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:21.775Z,1509686781.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:22.145Z,1509686782.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:22.173Z,1509686782.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:22.545Z,1509686782.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:22.578Z,1509686782.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:22.933Z,1509686782.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:22.948Z,1509686782.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:23.331Z,1509686783.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:23.346Z,1509686783.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:23.734Z,1509686783.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:23.771Z,1509686783.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:24.132Z,1509686784.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:24.147Z,1509686784.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:24.550Z,1509686784.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:24.571Z,1509686784.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:24.949Z,1509686784.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:24.975Z,1509686784.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:25.346Z,1509686785.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:25.376Z,1509686785.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:25.736Z,1509686785.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:25.751Z,1509686785.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:26.137Z,1509686786.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:26.154Z,1509686786.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:26.546Z,1509686786.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:26.576Z,1509686786.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:26.945Z,1509686786.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:26.973Z,1509686786.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:27.345Z,1509686787.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:27.376Z,1509686787.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:27.733Z,1509686787.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:27.749Z,1509686787.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:28.137Z,1509686788.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:28.152Z,1509686788.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:28.550Z,1509686788.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:28.574Z,1509686788.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:28.945Z,1509686788.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:28.976Z,1509686788.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:29.346Z,1509686789.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:29.426Z,1509686789.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:29.737Z,1509686789.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:29.752Z,1509686789.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:30.143Z,1509686790.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:30.182Z,1509686790.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:30.549Z,1509686790.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:30.595Z,1509686790.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:30.949Z,1509686790.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:30.981Z,1509686790.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:31.344Z,1509686791.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:31.394Z,1509686791.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:31.741Z,1509686791.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:31.794Z,1509686791.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:32.140Z,1509686792.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:32.155Z,1509686792.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:32.550Z,1509686792.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:32.565Z,1509686792.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:32.949Z,1509686792.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:32.965Z,1509686792.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:33.350Z,1509686793.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:33.365Z,1509686793.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:33.744Z,1509686793.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:33.759Z,1509686793.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:34.158Z,1509686794.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:34.198Z,1509686794.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:34.546Z,1509686794.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:34.561Z,1509686794.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:34.949Z,1509686794.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:34.987Z,1509686794.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:35.345Z,1509686795.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:35.361Z,1509686795.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:35.742Z,1509686795.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:35.757Z,1509686795.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:36.142Z,1509686796.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:36.163Z,1509686796.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:36.544Z,1509686796.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:36.559Z,1509686796.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:36.949Z,1509686796.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:36.965Z,1509686796.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:37.350Z,1509686797.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:37.365Z,1509686797.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:37.743Z,1509686797.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:37.763Z,1509686797.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:38.144Z,1509686798.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:38.159Z,1509686798.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:38.543Z,1509686798.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:38.563Z,1509686798.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:38.949Z,1509686798.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:38.965Z,1509686798.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:39.344Z,1509686799.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:39.360Z,1509686799.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:39.750Z,1509686799.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:39.765Z,1509686799.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:40.149Z,1509686800.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:40.165Z,1509686800.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:40.550Z,1509686800.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:40.565Z,1509686800.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:40.945Z,1509686800.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:40.961Z,1509686800.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:41.345Z,1509686801.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:41.361Z,1509686801.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:41.746Z,1509686801.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:41.767Z,1509686801.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:42.140Z,1509686802.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:42.156Z,1509686802.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:42.550Z,1509686802.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:42.566Z,1509686802.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:42.950Z,1509686802.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:42.965Z,1509686802.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:43.350Z,1509686803.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:43.365Z,1509686803.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:43.745Z,1509686803.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:43.826Z,1509686803.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:44.133Z,1509686804.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:44.165Z,1509686804.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:44.546Z,1509686804.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:44.612Z,1509686804.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:44.945Z,1509686804.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:44.972Z,1509686804.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:45.342Z,1509686805.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:45.379Z,1509686805.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:45.735Z,1509686805.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:45.795Z,1509686805.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:46.137Z,1509686806.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:46.169Z,1509686806.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:46.546Z,1509686806.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:46.578Z,1509686806.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:46.946Z,1509686806.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:46.975Z,1509686806.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:47.346Z,1509686807.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:47.383Z,1509686807.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:47.733Z,1509686807.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:47.748Z,1509686807.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:48.158Z,1509686808.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:48.203Z,1509686808.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:48.550Z,1509686808.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:48.584Z,1509686808.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:48.983Z,1509686808.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:49.050Z,1509686809.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:49.319Z,1509686809.319 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T05:26:49.319Z,1509686809.319 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T05:26:49.319Z,1509686809.319 [DropWeight](ERROR): Hardware Fault
2017-11-03T05:26:49.350Z,1509686809.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:49.395Z,1509686809.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:49.471Z,1509686809.471 [CBIT](INFO): Critical error at 20171103T052649
2017-11-03T05:26:49.473Z,1509686809.473 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T05:26:49.473Z,1509686809.473 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T05:26:49.736Z,1509686809.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:49.751Z,1509686809.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:49.847Z,1509686809.847 [CBIT](INFO): Critical error at 20171103T052649
2017-11-03T05:26:50.135Z,1509686810.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:50.150Z,1509686810.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:50.547Z,1509686810.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:50.581Z,1509686810.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:50.936Z,1509686810.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:50.959Z,1509686810.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:51.336Z,1509686811.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:51.351Z,1509686811.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:51.749Z,1509686811.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:51.785Z,1509686811.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:52.157Z,1509686812.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:52.182Z,1509686812.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:52.554Z,1509686812.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:52.583Z,1509686812.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:52.936Z,1509686812.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:52.951Z,1509686812.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:53.336Z,1509686813.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:53.359Z,1509686813.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:53.737Z,1509686813.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:53.751Z,1509686813.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:54.160Z,1509686814.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:54.175Z,1509686814.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:54.554Z,1509686814.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:54.569Z,1509686814.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:54.945Z,1509686814.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:54.970Z,1509686814.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:55.346Z,1509686815.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:55.375Z,1509686815.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:55.736Z,1509686815.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:55.760Z,1509686815.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:56.137Z,1509686816.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:56.152Z,1509686816.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:59.337Z,1509686819.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:59.430Z,1509686819.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:59.581Z,1509686819.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:26:59.622Z,1509686819.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:26:59.992Z,1509686819.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:00.019Z,1509686820.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:00.355Z,1509686820.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:00.416Z,1509686820.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:00.765Z,1509686820.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:00.786Z,1509686820.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:01.168Z,1509686821.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:01.223Z,1509686821.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:01.577Z,1509686821.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:01.634Z,1509686821.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:01.980Z,1509686821.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:01.995Z,1509686821.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:02.381Z,1509686822.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:02.396Z,1509686822.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:02.753Z,1509686822.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:02.786Z,1509686822.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:03.165Z,1509686823.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:03.180Z,1509686823.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:03.567Z,1509686823.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:03.582Z,1509686823.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:03.954Z,1509686823.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:03.980Z,1509686823.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:04.411Z,1509686824.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:04.511Z,1509686824.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:04.770Z,1509686824.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:04.801Z,1509686824.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:05.174Z,1509686825.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:05.198Z,1509686825.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:05.570Z,1509686825.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:05.601Z,1509686825.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:05.958Z,1509686825.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:05.973Z,1509686825.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:06.360Z,1509686826.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:06.451Z,1509686826.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:06.758Z,1509686826.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:06.773Z,1509686826.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:07.157Z,1509686827.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:07.173Z,1509686827.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:07.571Z,1509686827.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:07.600Z,1509686827.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:07.977Z,1509686827.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:08.006Z,1509686828.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:08.375Z,1509686828.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:08.399Z,1509686828.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:08.755Z,1509686828.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:08.773Z,1509686828.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:09.157Z,1509686829.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:09.173Z,1509686829.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:09.561Z,1509686829.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:09.578Z,1509686829.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:09.964Z,1509686829.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:09.991Z,1509686829.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:10.364Z,1509686830.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:10.379Z,1509686830.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:10.769Z,1509686830.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:10.786Z,1509686830.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:11.177Z,1509686831.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:11.209Z,1509686831.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:11.577Z,1509686831.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:11.609Z,1509686831.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:11.967Z,1509686831.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:11.983Z,1509686831.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:12.361Z,1509686832.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:12.380Z,1509686832.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:12.763Z,1509686832.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:12.782Z,1509686832.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:13.165Z,1509686833.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:13.186Z,1509686833.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:13.578Z,1509686833.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:13.678Z,1509686833.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:13.975Z,1509686833.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:14.022Z,1509686834.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:14.369Z,1509686834.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:14.408Z,1509686834.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:14.758Z,1509686834.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:14.773Z,1509686834.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:14.792Z,1509686834.792 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:27:14.792Z,1509686834.792 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T05:27:14.792Z,1509686834.792 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:27:14.849Z,1509686834.849 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:27:15.161Z,1509686835.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:15.196Z,1509686835.196 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:27:15.228Z,1509686835.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T05:27:15.230Z,1509686835.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:15.362Z,1509686835.362 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:27:15.555Z,1509686835.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:15.596Z,1509686835.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:27:15.597Z,1509686835.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:15.959Z,1509686835.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:15.985Z,1509686835.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:27:15.986Z,1509686835.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:16.358Z,1509686836.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:16.383Z,1509686836.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:27:16.384Z,1509686836.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:16.778Z,1509686836.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:16.792Z,1509686836.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:27:16.793Z,1509686836.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:16.877Z,1509686836.877 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:27:16.877Z,1509686836.877 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T05:27:16.976Z,1509686836.976 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:27:16.977Z,1509686836.977 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:27:16.977Z,1509686836.977 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:27:16.977Z,1509686836.977 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:27:17.182Z,1509686837.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:17.210Z,1509686837.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:27:17.211Z,1509686837.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:17.573Z,1509686837.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:17.602Z,1509686837.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:27:17.603Z,1509686837.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:17.955Z,1509686837.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:17.970Z,1509686837.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:27:17.971Z,1509686837.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:18.355Z,1509686838.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:18.371Z,1509686838.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:27:18.372Z,1509686838.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:18.755Z,1509686838.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:18.770Z,1509686838.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:27:18.771Z,1509686838.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:19.155Z,1509686839.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:19.170Z,1509686839.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:27:19.171Z,1509686839.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:19.570Z,1509686839.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:19.601Z,1509686839.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:27:19.601Z,1509686839.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:19.972Z,1509686839.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:19.987Z,1509686839.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:27:19.987Z,1509686839.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:20.366Z,1509686840.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:20.380Z,1509686840.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:27:20.381Z,1509686840.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:20.759Z,1509686840.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:20.774Z,1509686840.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:27:20.775Z,1509686840.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:21.096Z,1509686841.096 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:27:21.174Z,1509686841.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:21.211Z,1509686841.211 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:27:21.212Z,1509686841.212 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:27:21.213Z,1509686841.213 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:27:21.213Z,1509686841.213 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:27:21.235Z,1509686841.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T05:27:21.236Z,1509686841.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:21.561Z,1509686841.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:21.577Z,1509686841.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:27:21.577Z,1509686841.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:21.961Z,1509686841.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:21.976Z,1509686841.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:22.364Z,1509686842.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:22.379Z,1509686842.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:22.770Z,1509686842.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:22.785Z,1509686842.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:23.186Z,1509686843.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:23.208Z,1509686843.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:23.570Z,1509686843.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:23.585Z,1509686843.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:23.960Z,1509686843.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:23.983Z,1509686843.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:24.363Z,1509686844.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:24.378Z,1509686844.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:24.763Z,1509686844.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:24.779Z,1509686844.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:25.163Z,1509686845.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:25.178Z,1509686845.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:25.571Z,1509686845.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:25.609Z,1509686845.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:25.970Z,1509686845.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:25.985Z,1509686845.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:26.369Z,1509686846.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:26.385Z,1509686846.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:26.762Z,1509686846.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:26.777Z,1509686846.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:27.163Z,1509686847.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:27.178Z,1509686847.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:27.564Z,1509686847.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:27.622Z,1509686847.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:27.965Z,1509686847.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:28.035Z,1509686848.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:28.366Z,1509686848.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:28.398Z,1509686848.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:28.778Z,1509686848.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:28.838Z,1509686848.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:29.177Z,1509686849.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:29.199Z,1509686849.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:29.577Z,1509686849.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:29.632Z,1509686849.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:29.951Z,1509686849.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:30.004Z,1509686850.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:30.359Z,1509686850.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:30.391Z,1509686850.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:30.759Z,1509686850.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:30.789Z,1509686850.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:31.160Z,1509686851.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:31.175Z,1509686851.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:31.570Z,1509686851.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:31.595Z,1509686851.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:31.970Z,1509686851.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:31.995Z,1509686851.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:32.370Z,1509686852.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:32.396Z,1509686852.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:32.756Z,1509686852.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:32.775Z,1509686852.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:33.159Z,1509686853.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:33.210Z,1509686853.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:33.560Z,1509686853.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:33.575Z,1509686853.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:33.960Z,1509686853.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:33.975Z,1509686853.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:34.359Z,1509686854.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:34.375Z,1509686854.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:34.773Z,1509686854.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:34.804Z,1509686854.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:35.170Z,1509686855.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:35.192Z,1509686855.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:35.570Z,1509686855.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:35.585Z,1509686855.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:35.965Z,1509686855.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:35.987Z,1509686855.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:36.364Z,1509686856.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:36.379Z,1509686856.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:36.766Z,1509686856.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:36.782Z,1509686856.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:37.159Z,1509686857.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:37.174Z,1509686857.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:37.570Z,1509686857.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:37.585Z,1509686857.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:37.970Z,1509686857.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:37.985Z,1509686857.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:38.369Z,1509686858.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:38.390Z,1509686858.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:38.765Z,1509686858.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:38.780Z,1509686858.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:39.172Z,1509686859.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:39.187Z,1509686859.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:39.564Z,1509686859.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:39.580Z,1509686859.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:39.964Z,1509686859.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:39.980Z,1509686859.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:40.365Z,1509686860.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:40.381Z,1509686860.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:40.774Z,1509686860.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:40.789Z,1509686860.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:41.180Z,1509686861.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:41.195Z,1509686861.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:41.573Z,1509686861.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:41.588Z,1509686861.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:41.965Z,1509686861.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:42.023Z,1509686862.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:42.364Z,1509686862.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:42.427Z,1509686862.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:42.765Z,1509686862.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:42.781Z,1509686862.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:43.153Z,1509686863.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:43.180Z,1509686863.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:43.569Z,1509686863.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:43.623Z,1509686863.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:43.977Z,1509686863.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:43.995Z,1509686863.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:44.377Z,1509686864.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:44.424Z,1509686864.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:44.766Z,1509686864.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:44.822Z,1509686864.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:45.165Z,1509686865.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:45.183Z,1509686865.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:45.577Z,1509686865.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:45.592Z,1509686865.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:45.966Z,1509686865.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:45.982Z,1509686865.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:46.365Z,1509686866.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:46.382Z,1509686866.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:46.778Z,1509686866.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:46.854Z,1509686866.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:47.170Z,1509686867.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:47.205Z,1509686867.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:47.574Z,1509686867.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:47.605Z,1509686867.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:47.961Z,1509686867.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:47.976Z,1509686867.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:48.355Z,1509686868.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:48.371Z,1509686868.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:48.760Z,1509686868.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:48.776Z,1509686868.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:49.172Z,1509686869.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:49.191Z,1509686869.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:49.577Z,1509686869.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:49.599Z,1509686869.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:49.976Z,1509686869.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:49.992Z,1509686869.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:50.374Z,1509686870.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:50.389Z,1509686870.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:50.766Z,1509686870.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:50.787Z,1509686870.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:51.154Z,1509686871.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:51.180Z,1509686871.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:51.564Z,1509686871.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:51.587Z,1509686871.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:51.967Z,1509686871.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:51.987Z,1509686871.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:52.364Z,1509686872.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:52.402Z,1509686872.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:52.777Z,1509686872.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:52.792Z,1509686872.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:53.180Z,1509686873.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:53.195Z,1509686873.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:53.576Z,1509686873.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:53.591Z,1509686873.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:53.965Z,1509686873.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:53.986Z,1509686873.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:54.367Z,1509686874.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:54.387Z,1509686874.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:54.765Z,1509686874.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:54.780Z,1509686874.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:55.186Z,1509686875.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:55.201Z,1509686875.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:55.577Z,1509686875.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:55.593Z,1509686875.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:55.976Z,1509686875.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:55.991Z,1509686875.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:56.379Z,1509686876.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:56.394Z,1509686876.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:59.639Z,1509686879.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:59.702Z,1509686879.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:59.835Z,1509686879.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:27:59.843Z,1509686879.843 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:27:59.843Z,1509686879.843 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:27:59.843Z,1509686879.843 [BPC1](ERROR): Communications Fault
2017-11-03T05:27:59.851Z,1509686879.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:27:59.945Z,1509686879.945 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:28:00.245Z,1509686880.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:00.260Z,1509686880.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:00.643Z,1509686880.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:00.659Z,1509686880.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:01.041Z,1509686881.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:01.055Z,1509686881.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:01.144Z,1509686881.144 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:28:01.144Z,1509686881.144 [BPC1] No Fault, FailCount= 1
2017-11-03T05:28:01.435Z,1509686881.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:01.502Z,1509686881.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:01.833Z,1509686881.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:01.848Z,1509686881.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:02.232Z,1509686882.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:02.290Z,1509686882.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:02.641Z,1509686882.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:02.662Z,1509686882.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:03.043Z,1509686883.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:03.058Z,1509686883.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:03.444Z,1509686883.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:03.467Z,1509686883.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:03.833Z,1509686883.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:03.848Z,1509686883.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:04.232Z,1509686884.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:04.247Z,1509686884.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:04.634Z,1509686884.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:04.655Z,1509686884.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:05.044Z,1509686885.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:05.059Z,1509686885.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:05.431Z,1509686885.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:05.446Z,1509686885.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:05.848Z,1509686885.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:05.871Z,1509686885.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:06.249Z,1509686886.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:06.264Z,1509686886.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:06.645Z,1509686886.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:06.660Z,1509686886.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:07.023Z,1509686887.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:07.049Z,1509686887.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:07.432Z,1509686887.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:07.463Z,1509686887.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:07.827Z,1509686887.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:07.854Z,1509686887.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:08.224Z,1509686888.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:08.250Z,1509686888.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:08.648Z,1509686888.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:08.662Z,1509686888.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:09.045Z,1509686889.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:09.067Z,1509686889.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:09.445Z,1509686889.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:09.461Z,1509686889.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:09.853Z,1509686889.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:09.874Z,1509686889.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:10.225Z,1509686890.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:10.252Z,1509686890.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:10.626Z,1509686890.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:10.659Z,1509686890.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:11.026Z,1509686891.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:11.058Z,1509686891.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:11.467Z,1509686891.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:11.507Z,1509686891.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:11.838Z,1509686891.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:11.867Z,1509686891.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:12.247Z,1509686892.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:12.262Z,1509686892.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:12.648Z,1509686892.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:12.691Z,1509686892.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:13.031Z,1509686893.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:13.071Z,1509686893.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:13.461Z,1509686893.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:13.485Z,1509686893.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:13.824Z,1509686893.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:13.840Z,1509686893.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:14.223Z,1509686894.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:14.275Z,1509686894.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:14.637Z,1509686894.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:14.669Z,1509686894.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:15.037Z,1509686895.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:15.087Z,1509686895.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:15.437Z,1509686895.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:15.483Z,1509686895.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:15.827Z,1509686895.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:15.842Z,1509686895.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:16.223Z,1509686896.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:16.239Z,1509686896.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:16.623Z,1509686896.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:16.638Z,1509686896.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:17.028Z,1509686897.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:17.043Z,1509686897.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:17.423Z,1509686897.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:17.443Z,1509686897.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:17.837Z,1509686897.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:17.868Z,1509686897.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:18.237Z,1509686898.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:18.269Z,1509686898.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:18.637Z,1509686898.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:18.668Z,1509686898.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:19.028Z,1509686899.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:19.046Z,1509686899.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:19.431Z,1509686899.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:19.467Z,1509686899.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:19.824Z,1509686899.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:19.847Z,1509686899.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:20.230Z,1509686900.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:20.251Z,1509686900.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:20.637Z,1509686900.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:20.652Z,1509686900.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:21.049Z,1509686901.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:21.073Z,1509686901.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:21.437Z,1509686901.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:21.469Z,1509686901.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:21.841Z,1509686901.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:21.876Z,1509686901.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:22.228Z,1509686902.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:22.243Z,1509686902.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:22.627Z,1509686902.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:22.643Z,1509686902.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:23.032Z,1509686903.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:23.047Z,1509686903.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:23.423Z,1509686903.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:23.453Z,1509686903.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:23.845Z,1509686903.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:23.867Z,1509686903.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:24.241Z,1509686904.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:24.256Z,1509686904.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:24.645Z,1509686904.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:24.661Z,1509686904.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:25.024Z,1509686905.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:25.056Z,1509686905.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:25.462Z,1509686905.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:25.501Z,1509686905.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:25.827Z,1509686905.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:25.854Z,1509686905.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:26.224Z,1509686906.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:26.275Z,1509686906.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:26.646Z,1509686906.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:26.661Z,1509686906.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:27.048Z,1509686907.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:27.063Z,1509686907.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:27.462Z,1509686907.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:27.520Z,1509686907.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:27.826Z,1509686907.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:27.853Z,1509686907.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:28.227Z,1509686908.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:28.252Z,1509686908.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:28.624Z,1509686908.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:28.688Z,1509686908.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:29.023Z,1509686909.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:29.056Z,1509686909.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:29.420Z,1509686909.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:29.490Z,1509686909.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:29.845Z,1509686909.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:29.902Z,1509686909.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:30.246Z,1509686910.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:30.261Z,1509686910.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:30.645Z,1509686910.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:30.660Z,1509686910.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:31.042Z,1509686911.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:31.063Z,1509686911.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:31.427Z,1509686911.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:31.453Z,1509686911.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:31.827Z,1509686911.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:31.853Z,1509686911.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:32.225Z,1509686912.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:32.254Z,1509686912.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:32.645Z,1509686912.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:32.660Z,1509686912.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:33.051Z,1509686913.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:33.071Z,1509686913.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:33.445Z,1509686913.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:33.460Z,1509686913.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:33.822Z,1509686913.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:33.848Z,1509686913.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:34.227Z,1509686914.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:34.252Z,1509686914.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:34.652Z,1509686914.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:34.667Z,1509686914.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:35.023Z,1509686915.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:35.049Z,1509686915.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:35.427Z,1509686915.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:35.452Z,1509686915.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:35.845Z,1509686915.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:35.860Z,1509686915.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:36.241Z,1509686916.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:36.256Z,1509686916.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:36.645Z,1509686916.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:36.660Z,1509686916.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:37.024Z,1509686917.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:37.054Z,1509686917.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:37.435Z,1509686917.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:37.461Z,1509686917.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:37.827Z,1509686917.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:37.859Z,1509686917.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:38.224Z,1509686918.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:38.239Z,1509686918.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:38.637Z,1509686918.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:38.663Z,1509686918.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:39.041Z,1509686919.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:39.067Z,1509686919.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:39.473Z,1509686919.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:39.491Z,1509686919.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:39.827Z,1509686919.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:39.867Z,1509686919.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:40.224Z,1509686920.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:40.286Z,1509686920.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:40.626Z,1509686920.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:40.647Z,1509686920.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:41.031Z,1509686921.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:41.046Z,1509686921.046 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:41.046Z,1509686921.046 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 105
2017-11-03T05:28:41.046Z,1509686921.046 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:28:41.048Z,1509686921.048 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:41.048Z,1509686921.048 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 105
2017-11-03T05:28:41.048Z,1509686921.048 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:28:41.050Z,1509686921.050 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:41.050Z,1509686921.050 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105
2017-11-03T05:28:41.050Z,1509686921.050 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:28:41.168Z,1509686921.168 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:28:41.169Z,1509686921.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:28:41.169Z,1509686921.169 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:28:41.455Z,1509686921.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:41.573Z,1509686921.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:28:41.573Z,1509686921.573 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 105
2017-11-03T05:28:41.573Z,1509686921.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:28:41.573Z,1509686921.573 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 105
2017-11-03T05:28:41.574Z,1509686921.574 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:28:41.574Z,1509686921.574 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105
2017-11-03T05:28:41.838Z,1509686921.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:41.886Z,1509686921.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:28:41.886Z,1509686921.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:28:41.886Z,1509686921.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:28:41.887Z,1509686921.887 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:28:41.887Z,1509686921.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:28:41.887Z,1509686921.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:28:41.888Z,1509686921.888 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:28:41.892Z,1509686921.892 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:28:41.893Z,1509686921.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:28:42.237Z,1509686922.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:42.259Z,1509686922.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:42.638Z,1509686922.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:42.653Z,1509686922.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:43.035Z,1509686923.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:43.083Z,1509686923.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:43.432Z,1509686923.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:43.455Z,1509686923.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:43.836Z,1509686923.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:43.886Z,1509686923.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:44.233Z,1509686924.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:44.283Z,1509686924.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:44.638Z,1509686924.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:44.658Z,1509686924.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:45.049Z,1509686925.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:45.079Z,1509686925.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:45.438Z,1509686925.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:45.453Z,1509686925.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:45.835Z,1509686925.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:45.855Z,1509686925.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:46.227Z,1509686926.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:46.243Z,1509686926.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:46.630Z,1509686926.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:46.658Z,1509686926.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:47.023Z,1509686927.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:47.051Z,1509686927.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:47.434Z,1509686927.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:47.455Z,1509686927.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:47.845Z,1509686927.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:47.861Z,1509686927.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:48.241Z,1509686928.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:48.257Z,1509686928.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:48.645Z,1509686928.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:48.661Z,1509686928.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:49.038Z,1509686929.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:49.059Z,1509686929.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:49.433Z,1509686929.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:49.451Z,1509686929.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:49.822Z,1509686929.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:49.862Z,1509686929.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:50.234Z,1509686930.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:50.249Z,1509686930.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:50.642Z,1509686930.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:50.656Z,1509686930.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:51.053Z,1509686931.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:51.149Z,1509686931.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:51.438Z,1509686931.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:51.454Z,1509686931.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:51.831Z,1509686931.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:51.848Z,1509686931.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:52.231Z,1509686932.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:52.247Z,1509686932.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:52.631Z,1509686932.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:52.647Z,1509686932.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:53.032Z,1509686933.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:53.048Z,1509686933.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:53.475Z,1509686933.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:53.490Z,1509686933.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:53.837Z,1509686933.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:53.859Z,1509686933.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:54.238Z,1509686934.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:54.253Z,1509686934.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:54.646Z,1509686934.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:54.678Z,1509686934.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:55.032Z,1509686935.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:55.097Z,1509686935.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:55.452Z,1509686935.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:55.499Z,1509686935.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:55.835Z,1509686935.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:55.855Z,1509686935.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:56.234Z,1509686936.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:56.249Z,1509686936.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:56.644Z,1509686936.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:56.704Z,1509686936.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:59.834Z,1509686939.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:28:59.849Z,1509686939.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:28:59.999Z,1509686939.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:00.042Z,1509686940.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:00.374Z,1509686940.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:00.403Z,1509686940.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:00.776Z,1509686940.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:00.899Z,1509686940.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:01.172Z,1509686941.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:01.203Z,1509686941.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:01.586Z,1509686941.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:01.652Z,1509686941.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:01.986Z,1509686941.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:02.013Z,1509686942.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:02.399Z,1509686942.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:02.466Z,1509686942.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:02.772Z,1509686942.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:02.786Z,1509686942.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:03.176Z,1509686943.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:03.191Z,1509686943.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:03.572Z,1509686943.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:03.587Z,1509686943.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:03.972Z,1509686943.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:03.987Z,1509686943.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:04.372Z,1509686944.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:04.387Z,1509686944.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:04.787Z,1509686944.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:04.815Z,1509686944.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:05.186Z,1509686945.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:05.216Z,1509686945.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:05.587Z,1509686945.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:05.611Z,1509686945.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:05.971Z,1509686945.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:05.987Z,1509686945.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:06.372Z,1509686946.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:06.387Z,1509686946.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:06.775Z,1509686946.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:06.791Z,1509686946.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:07.176Z,1509686947.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:07.191Z,1509686947.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:07.589Z,1509686947.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:07.622Z,1509686947.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:07.986Z,1509686947.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:08.009Z,1509686948.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:08.390Z,1509686948.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:08.419Z,1509686948.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:08.771Z,1509686948.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:08.787Z,1509686948.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:09.171Z,1509686949.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:09.187Z,1509686949.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:09.587Z,1509686949.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:09.610Z,1509686949.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:09.974Z,1509686949.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:09.989Z,1509686949.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:10.379Z,1509686950.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:10.411Z,1509686950.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:10.786Z,1509686950.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:10.809Z,1509686950.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:11.193Z,1509686951.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:11.216Z,1509686951.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:11.589Z,1509686951.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:11.604Z,1509686951.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:11.980Z,1509686951.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:11.995Z,1509686951.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:12.368Z,1509686952.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:12.393Z,1509686952.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:12.783Z,1509686952.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:12.799Z,1509686952.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:13.170Z,1509686953.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:13.223Z,1509686953.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:13.597Z,1509686953.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:13.626Z,1509686953.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:13.986Z,1509686953.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:14.035Z,1509686954.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:14.390Z,1509686954.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:14.419Z,1509686954.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:14.771Z,1509686954.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:14.786Z,1509686954.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:15.179Z,1509686955.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:15.231Z,1509686955.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:15.571Z,1509686955.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:15.587Z,1509686955.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:15.975Z,1509686955.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:16.023Z,1509686956.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:16.371Z,1509686956.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:16.387Z,1509686956.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:16.790Z,1509686956.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:16.863Z,1509686956.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:16.983Z,1509686956.983 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:29:16.983Z,1509686956.983 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T05:29:16.983Z,1509686956.983 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:29:17.205Z,1509686957.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:17.234Z,1509686957.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:29:17.235Z,1509686957.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:17.325Z,1509686957.325 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:29:17.325Z,1509686957.325 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T05:29:17.388Z,1509686957.388 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:29:17.473Z,1509686957.473 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:29:17.586Z,1509686957.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:17.607Z,1509686957.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.7 s old, using for 20.0 s.
2017-11-03T05:29:17.625Z,1509686957.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:17.982Z,1509686957.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:17.998Z,1509686957.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-03T05:29:17.999Z,1509686957.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:18.382Z,1509686958.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:18.397Z,1509686958.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-03T05:29:18.398Z,1509686958.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:18.781Z,1509686958.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:18.796Z,1509686958.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-03T05:29:18.797Z,1509686958.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:19.182Z,1509686959.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:19.197Z,1509686959.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T05:29:19.198Z,1509686959.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:19.586Z,1509686959.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:19.600Z,1509686959.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-11-03T05:29:19.601Z,1509686959.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:19.983Z,1509686959.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:20.002Z,1509686960.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-11-03T05:29:20.003Z,1509686960.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:20.386Z,1509686960.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:20.401Z,1509686960.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T05:29:20.402Z,1509686960.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:20.782Z,1509686960.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:20.797Z,1509686960.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T05:29:20.798Z,1509686960.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:21.182Z,1509686961.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:21.197Z,1509686961.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T05:29:21.198Z,1509686961.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:21.582Z,1509686961.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:21.597Z,1509686961.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T05:29:21.598Z,1509686961.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:21.983Z,1509686961.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:22.002Z,1509686962.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T05:29:22.003Z,1509686962.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:22.376Z,1509686962.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:22.398Z,1509686962.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T05:29:22.399Z,1509686962.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:22.786Z,1509686962.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:22.801Z,1509686962.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T05:29:22.802Z,1509686962.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:23.190Z,1509686963.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:23.204Z,1509686963.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T05:29:23.205Z,1509686963.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:23.586Z,1509686963.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:23.601Z,1509686963.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-03T05:29:23.602Z,1509686963.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:23.980Z,1509686963.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:23.995Z,1509686963.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T05:29:23.996Z,1509686963.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:24.380Z,1509686964.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:24.395Z,1509686964.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-03T05:29:24.396Z,1509686964.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:24.782Z,1509686964.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:24.797Z,1509686964.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-03T05:29:24.798Z,1509686964.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:25.178Z,1509686965.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:25.198Z,1509686965.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-03T05:29:25.199Z,1509686965.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:25.586Z,1509686965.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:25.601Z,1509686965.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-03T05:29:25.602Z,1509686965.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:25.986Z,1509686965.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:26.000Z,1509686966.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-03T05:29:26.001Z,1509686966.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:26.386Z,1509686966.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:26.401Z,1509686966.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-03T05:29:26.402Z,1509686966.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:26.782Z,1509686966.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:26.797Z,1509686966.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-03T05:29:26.798Z,1509686966.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:27.183Z,1509686967.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:27.197Z,1509686967.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-03T05:29:27.198Z,1509686967.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:27.582Z,1509686967.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:27.641Z,1509686967.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T05:29:27.642Z,1509686967.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:27.981Z,1509686967.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:28.002Z,1509686968.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T05:29:28.003Z,1509686968.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:28.376Z,1509686968.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:28.391Z,1509686968.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T05:29:28.392Z,1509686968.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:28.789Z,1509686968.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:28.846Z,1509686968.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:29:28.847Z,1509686968.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:29.192Z,1509686969.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:29.207Z,1509686969.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-03T05:29:29.208Z,1509686969.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:29.592Z,1509686969.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:29.607Z,1509686969.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-03T05:29:29.608Z,1509686969.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:29.979Z,1509686969.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:30.035Z,1509686970.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T05:29:30.036Z,1509686970.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:30.380Z,1509686970.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:30.395Z,1509686970.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-03T05:29:30.396Z,1509686970.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:30.783Z,1509686970.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:30.842Z,1509686970.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T05:29:30.843Z,1509686970.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:31.179Z,1509686971.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:31.235Z,1509686971.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T05:29:31.236Z,1509686971.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:31.592Z,1509686971.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:31.607Z,1509686971.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-03T05:29:31.608Z,1509686971.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:31.991Z,1509686971.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:32.010Z,1509686972.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T05:29:32.011Z,1509686972.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:32.391Z,1509686972.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:32.410Z,1509686972.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T05:29:32.411Z,1509686972.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:32.780Z,1509686972.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:32.795Z,1509686972.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-03T05:29:32.796Z,1509686972.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:33.177Z,1509686973.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:33.192Z,1509686973.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-03T05:29:33.193Z,1509686973.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:33.583Z,1509686973.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:33.602Z,1509686973.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-03T05:29:33.603Z,1509686973.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:33.985Z,1509686973.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:33.000Z,1509686974.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T05:29:34.001Z,1509686974.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:34.383Z,1509686974.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:34.397Z,1509686974.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T05:29:34.398Z,1509686974.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:34.796Z,1509686974.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:34.820Z,1509686974.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:29:34.837Z,1509686974.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:35.193Z,1509686975.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:35.207Z,1509686975.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-03T05:29:35.209Z,1509686975.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:35.593Z,1509686975.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:35.608Z,1509686975.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-03T05:29:35.609Z,1509686975.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:35.977Z,1509686975.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:35.000Z,1509686976.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T05:29:36.005Z,1509686976.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:36.368Z,1509686976.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:36.394Z,1509686976.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-03T05:29:36.395Z,1509686976.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:36.785Z,1509686976.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:36.800Z,1509686976.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-03T05:29:36.801Z,1509686976.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:37.181Z,1509686977.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:37.201Z,1509686977.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:37.595Z,1509686977.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:37.610Z,1509686977.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:37.997Z,1509686977.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:38.012Z,1509686978.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:38.396Z,1509686978.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:38.411Z,1509686978.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:38.785Z,1509686978.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:38.801Z,1509686978.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:39.183Z,1509686979.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:39.207Z,1509686979.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:39.581Z,1509686979.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:39.598Z,1509686979.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:39.984Z,1509686979.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:39.000Z,1509686980.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:40.372Z,1509686980.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:40.399Z,1509686980.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:40.793Z,1509686980.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:40.815Z,1509686980.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:41.198Z,1509686981.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:41.239Z,1509686981.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:41.593Z,1509686981.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:41.610Z,1509686981.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:41.973Z,1509686981.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:42.043Z,1509686982.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:42.375Z,1509686982.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:42.401Z,1509686982.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:42.769Z,1509686982.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:42.804Z,1509686982.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:43.172Z,1509686983.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:43.207Z,1509686983.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:43.595Z,1509686983.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:43.614Z,1509686983.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:43.990Z,1509686983.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:44.005Z,1509686984.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:44.393Z,1509686984.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:44.409Z,1509686984.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:44.768Z,1509686984.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:44.799Z,1509686984.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:45.168Z,1509686985.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:45.196Z,1509686985.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:45.572Z,1509686985.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:45.599Z,1509686985.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:45.975Z,1509686985.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:46.013Z,1509686986.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:46.368Z,1509686986.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:46.377Z,1509686986.377 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:29:46.377Z,1509686986.377 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:29:46.377Z,1509686986.377 [BPC1](ERROR): Communications Fault
2017-11-03T05:29:46.385Z,1509686986.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:46.489Z,1509686986.489 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:29:46.786Z,1509686986.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:46.819Z,1509686986.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:47.202Z,1509686987.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:47.216Z,1509686987.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:47.586Z,1509686987.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:47.618Z,1509686987.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:47.699Z,1509686987.699 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:29:47.699Z,1509686987.699 [BPC1] No Fault, FailCount= 1
2017-11-03T05:29:47.974Z,1509686987.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:48.055Z,1509686988.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:48.372Z,1509686988.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:48.414Z,1509686988.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:48.773Z,1509686988.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:48.788Z,1509686988.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:49.172Z,1509686989.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:49.187Z,1509686989.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:49.585Z,1509686989.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:49.611Z,1509686989.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:49.985Z,1509686989.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:50.015Z,1509686990.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:50.385Z,1509686990.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:50.415Z,1509686990.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:50.774Z,1509686990.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:50.789Z,1509686990.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:51.172Z,1509686991.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:51.187Z,1509686991.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:51.572Z,1509686991.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:51.587Z,1509686991.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:51.973Z,1509686991.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:51.987Z,1509686991.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:52.372Z,1509686992.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:52.387Z,1509686992.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:52.790Z,1509686992.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:52.821Z,1509686992.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:53.185Z,1509686993.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:53.212Z,1509686993.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:53.585Z,1509686993.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:53.611Z,1509686993.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:53.974Z,1509686993.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:54.011Z,1509686994.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:54.371Z,1509686994.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:54.386Z,1509686994.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:54.772Z,1509686994.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:54.787Z,1509686994.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:55.178Z,1509686995.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:55.195Z,1509686995.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:55.214Z,1509686995.214 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T05:24:55.2Z
2017-11-03T05:29:55.215Z,1509686995.215 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T05:29:55.215Z,1509686995.215 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T05:29:55.584Z,1509686995.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:55.599Z,1509686995.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:56.098Z,1509686996.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:56.121Z,1509686996.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:56.386Z,1509686996.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:56.422Z,1509686996.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:59.486Z,1509686999.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:59.574Z,1509686999.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:29:59.685Z,1509686999.685 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171103T001125/Courier0124.lzma
2017-11-03T05:29:59.706Z,1509686999.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:29:59.742Z,1509686999.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:00.126Z,1509687000.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:00.141Z,1509687000.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:00.518Z,1509687000.518 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0124.lzma.bak
2017-11-03T05:30:00.518Z,1509687000.518 [DataOverHttps](INFO): SBD MOMSN=5182808
2017-11-03T05:30:00.556Z,1509687000.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:00.622Z,1509687000.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:01.126Z,1509687001.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:01.141Z,1509687001.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:01.307Z,1509687001.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:01.379Z,1509687001.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:04.397Z,1509687004.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:04.451Z,1509687004.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:04.579Z,1509687004.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:04.595Z,1509687004.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:04.988Z,1509687004.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:05.003Z,1509687005.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:05.389Z,1509687005.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:05.404Z,1509687005.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:05.788Z,1509687005.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:05.803Z,1509687005.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:06.179Z,1509687006.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:06.194Z,1509687006.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:09.256Z,1509687009.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:09.282Z,1509687009.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:09.389Z,1509687009.389 [DataOverHttps](INFO): Sending 239 bytes from file Logs/20171103T001125/Express0125.lzma
2017-11-03T05:30:09.410Z,1509687009.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:09.475Z,1509687009.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:09.793Z,1509687009.793 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T05:30:09.793Z,1509687009.793 [NAL9602] Data Fault, FailCount= 4
2017-11-03T05:30:09.793Z,1509687009.793 [NAL9602](ERROR): Data Fault
2017-11-03T05:30:09.810Z,1509687009.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:09.846Z,1509687009.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:09.926Z,1509687009.926 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T05:30:10.187Z,1509687010.187 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0125.lzma.bak
2017-11-03T05:30:10.187Z,1509687010.187 [DataOverHttps](INFO): SBD MOMSN=5182812
2017-11-03T05:30:10.197Z,1509687010.197 [NAL9602](INFO): Powering down
2017-11-03T05:30:10.235Z,1509687010.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:10.249Z,1509687010.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:10.809Z,1509687010.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:10.832Z,1509687010.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:10.835Z,1509687010.835 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T05:30:10.835Z,1509687010.835 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T05:30:10.835Z,1509687010.835 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T05:30:11.028Z,1509687011.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:11.043Z,1509687011.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:11.129Z,1509687011.129 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T05:30:11.129Z,1509687011.129 [NAL9602] No Fault, FailCount= 4
2017-11-03T05:30:14.123Z,1509687014.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:14.139Z,1509687014.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:14.286Z,1509687014.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:14.324Z,1509687014.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:14.685Z,1509687014.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:14.707Z,1509687014.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:15.087Z,1509687015.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:15.150Z,1509687015.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:15.479Z,1509687015.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:15.546Z,1509687015.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:15.885Z,1509687015.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:15.899Z,1509687015.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:16.279Z,1509687016.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:16.294Z,1509687016.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:16.679Z,1509687016.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:16.694Z,1509687016.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:17.083Z,1509687017.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:17.126Z,1509687017.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:17.485Z,1509687017.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:17.500Z,1509687017.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:17.879Z,1509687017.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:17.939Z,1509687017.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:18.284Z,1509687018.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:18.328Z,1509687018.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:18.684Z,1509687018.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:18.699Z,1509687018.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:19.085Z,1509687019.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:19.100Z,1509687019.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:19.483Z,1509687019.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:19.498Z,1509687019.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:19.884Z,1509687019.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:19.899Z,1509687019.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:20.285Z,1509687020.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:20.300Z,1509687020.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:20.683Z,1509687020.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:20.698Z,1509687020.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:21.078Z,1509687021.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:21.095Z,1509687021.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:21.481Z,1509687021.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:21.497Z,1509687021.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:21.883Z,1509687021.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:21.898Z,1509687021.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:22.279Z,1509687022.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:22.294Z,1509687022.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:22.682Z,1509687022.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:22.698Z,1509687022.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:23.085Z,1509687023.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:23.099Z,1509687023.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:23.484Z,1509687023.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:23.543Z,1509687023.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:23.881Z,1509687023.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:23.897Z,1509687023.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:24.283Z,1509687024.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:24.298Z,1509687024.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:24.685Z,1509687024.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:24.711Z,1509687024.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:25.083Z,1509687025.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:25.098Z,1509687025.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:25.482Z,1509687025.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:25.497Z,1509687025.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:25.880Z,1509687025.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:25.899Z,1509687025.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:26.286Z,1509687026.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:26.301Z,1509687026.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:26.677Z,1509687026.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:26.705Z,1509687026.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:27.085Z,1509687027.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:27.100Z,1509687027.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:27.486Z,1509687027.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:27.501Z,1509687027.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:27.883Z,1509687027.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:27.898Z,1509687027.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:28.284Z,1509687028.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:28.299Z,1509687028.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:28.685Z,1509687028.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:28.707Z,1509687028.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:29.083Z,1509687029.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:29.115Z,1509687029.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:29.485Z,1509687029.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:29.500Z,1509687029.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:29.883Z,1509687029.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:29.899Z,1509687029.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:30.283Z,1509687030.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:30.335Z,1509687030.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:30.678Z,1509687030.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:30.693Z,1509687030.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:31.084Z,1509687031.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:31.142Z,1509687031.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:31.486Z,1509687031.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:31.546Z,1509687031.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:31.885Z,1509687031.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:31.900Z,1509687031.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:32.283Z,1509687032.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:32.299Z,1509687032.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:32.683Z,1509687032.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:32.698Z,1509687032.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:33.085Z,1509687033.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:33.100Z,1509687033.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:33.484Z,1509687033.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:33.499Z,1509687033.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:33.883Z,1509687033.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:33.898Z,1509687033.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:34.284Z,1509687034.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:34.299Z,1509687034.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:34.686Z,1509687034.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:34.701Z,1509687034.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:35.082Z,1509687035.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:35.102Z,1509687035.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:35.485Z,1509687035.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:35.500Z,1509687035.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:35.883Z,1509687035.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:35.898Z,1509687035.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:36.288Z,1509687036.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:36.311Z,1509687036.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:36.685Z,1509687036.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:36.700Z,1509687036.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:37.083Z,1509687037.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:37.098Z,1509687037.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:37.480Z,1509687037.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:37.507Z,1509687037.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:37.885Z,1509687037.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:37.900Z,1509687037.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:38.283Z,1509687038.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:38.298Z,1509687038.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:38.683Z,1509687038.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:38.699Z,1509687038.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:39.080Z,1509687039.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:39.102Z,1509687039.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:39.483Z,1509687039.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:39.499Z,1509687039.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:39.882Z,1509687039.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:39.901Z,1509687039.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:40.262Z,1509687040.262 [NAL9602](INFO): Powering up NAL9602
2017-11-03T05:30:40.292Z,1509687040.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:40.307Z,1509687040.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:40.686Z,1509687040.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:40.702Z,1509687040.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:41.086Z,1509687041.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:41.102Z,1509687041.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:41.487Z,1509687041.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:41.502Z,1509687041.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:41.883Z,1509687041.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:41.939Z,1509687041.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:42.285Z,1509687042.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:42.300Z,1509687042.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:42.688Z,1509687042.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:42.702Z,1509687042.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:43.087Z,1509687043.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:43.103Z,1509687043.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:43.482Z,1509687043.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:43.506Z,1509687043.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:43.878Z,1509687043.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:43.923Z,1509687043.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:44.274Z,1509687044.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:44.301Z,1509687044.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:44.677Z,1509687044.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:44.742Z,1509687044.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:45.078Z,1509687045.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:45.104Z,1509687045.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:45.479Z,1509687045.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:45.541Z,1509687045.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:45.876Z,1509687045.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:45.941Z,1509687045.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:46.271Z,1509687046.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:46.304Z,1509687046.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:46.678Z,1509687046.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:46.705Z,1509687046.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:47.076Z,1509687047.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:47.106Z,1509687047.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:47.479Z,1509687047.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:47.504Z,1509687047.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:47.878Z,1509687047.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:47.904Z,1509687047.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:48.276Z,1509687048.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:48.306Z,1509687048.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:48.678Z,1509687048.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:48.703Z,1509687048.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:49.072Z,1509687049.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:49.104Z,1509687049.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:49.477Z,1509687049.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:49.508Z,1509687049.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:49.872Z,1509687049.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:49.887Z,1509687049.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:50.273Z,1509687050.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:50.288Z,1509687050.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:50.677Z,1509687050.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:50.708Z,1509687050.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:51.090Z,1509687051.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:51.115Z,1509687051.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:51.459Z,1509687051.459 [NAL9602](INFO): NAL9602 initialized
2017-11-03T05:30:51.476Z,1509687051.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:51.493Z,1509687051.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:51.875Z,1509687051.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:51.891Z,1509687051.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:52.290Z,1509687052.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:52.321Z,1509687052.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:52.689Z,1509687052.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:52.720Z,1509687052.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:53.087Z,1509687053.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:53.125Z,1509687053.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:53.485Z,1509687053.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:53.538Z,1509687053.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:53.874Z,1509687053.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:53.889Z,1509687053.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:54.286Z,1509687054.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:54.329Z,1509687054.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:54.686Z,1509687054.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:54.740Z,1509687054.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:55.101Z,1509687055.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:55.137Z,1509687055.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:55.499Z,1509687055.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:55.534Z,1509687055.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:55.919Z,1509687055.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:55.974Z,1509687055.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:56.284Z,1509687056.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:56.299Z,1509687056.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:56.683Z,1509687056.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:56.766Z,1509687056.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:57.083Z,1509687057.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:57.099Z,1509687057.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:57.478Z,1509687057.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:57.508Z,1509687057.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:57.895Z,1509687057.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:57.923Z,1509687057.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:58.299Z,1509687058.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:58.367Z,1509687058.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:58.695Z,1509687058.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:58.730Z,1509687058.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:59.101Z,1509687059.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:59.174Z,1509687059.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:59.513Z,1509687059.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:59.587Z,1509687059.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:30:59.877Z,1509687059.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:30:59.955Z,1509687059.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:00.297Z,1509687060.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:00.358Z,1509687060.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:00.675Z,1509687060.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:00.742Z,1509687060.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:01.088Z,1509687061.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:01.121Z,1509687061.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:01.492Z,1509687061.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:01.526Z,1509687061.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:01.887Z,1509687061.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:01.942Z,1509687061.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:02.276Z,1509687062.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:02.322Z,1509687062.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:02.676Z,1509687062.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:02.691Z,1509687062.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:03.093Z,1509687063.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:03.142Z,1509687063.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:03.476Z,1509687063.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:03.496Z,1509687063.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:03.917Z,1509687063.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:03.943Z,1509687063.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:04.302Z,1509687064.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:04.354Z,1509687064.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:04.696Z,1509687064.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:04.730Z,1509687064.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:05.085Z,1509687065.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:05.123Z,1509687065.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:05.484Z,1509687065.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:05.538Z,1509687065.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:05.881Z,1509687065.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:05.925Z,1509687065.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:06.290Z,1509687066.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:06.331Z,1509687066.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:06.701Z,1509687066.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:06.751Z,1509687066.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:07.086Z,1509687067.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:07.101Z,1509687067.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:07.493Z,1509687067.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:07.524Z,1509687067.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:07.893Z,1509687067.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:07.924Z,1509687067.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:08.283Z,1509687068.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:08.299Z,1509687068.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:08.680Z,1509687068.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:08.695Z,1509687068.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:09.080Z,1509687069.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:09.095Z,1509687069.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:09.479Z,1509687069.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:09.495Z,1509687069.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:09.934Z,1509687069.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:09.950Z,1509687069.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:10.293Z,1509687070.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:10.320Z,1509687070.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:10.693Z,1509687070.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:10.813Z,1509687070.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:11.081Z,1509687071.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:11.096Z,1509687071.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:11.483Z,1509687071.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:11.498Z,1509687071.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:14.810Z,1509687074.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:14.851Z,1509687074.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:14.999Z,1509687074.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:15.032Z,1509687075.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:15.413Z,1509687075.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:15.430Z,1509687075.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:15.819Z,1509687075.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:15.875Z,1509687075.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:16.206Z,1509687076.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:16.231Z,1509687076.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:16.594Z,1509687076.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:16.639Z,1509687076.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:16.993Z,1509687076.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:17.042Z,1509687077.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:17.398Z,1509687077.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:17.421Z,1509687077.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:17.792Z,1509687077.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:17.807Z,1509687077.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:18.206Z,1509687078.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:18.231Z,1509687078.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:18.605Z,1509687078.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:18.632Z,1509687078.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:19.001Z,1509687079.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:19.033Z,1509687079.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:19.389Z,1509687079.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:19.404Z,1509687079.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:19.793Z,1509687079.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:19.808Z,1509687079.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:20.193Z,1509687080.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:20.208Z,1509687080.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:20.593Z,1509687080.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:20.635Z,1509687080.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:21.009Z,1509687081.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:21.033Z,1509687081.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:21.409Z,1509687081.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:21.435Z,1509687081.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:21.806Z,1509687081.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:21.836Z,1509687081.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:22.199Z,1509687082.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:22.214Z,1509687082.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:22.591Z,1509687082.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:22.607Z,1509687082.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:22.992Z,1509687082.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:23.008Z,1509687083.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:23.399Z,1509687083.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:23.415Z,1509687083.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:23.792Z,1509687083.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:23.807Z,1509687083.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:24.209Z,1509687084.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:24.234Z,1509687084.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:24.609Z,1509687084.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:24.635Z,1509687084.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:25.005Z,1509687085.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:25.036Z,1509687085.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:25.391Z,1509687085.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:25.407Z,1509687085.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:25.799Z,1509687085.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:25.819Z,1509687085.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:26.196Z,1509687086.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:26.218Z,1509687086.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:26.591Z,1509687086.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:26.611Z,1509687086.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:27.009Z,1509687087.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:27.040Z,1509687087.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:27.409Z,1509687087.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:27.440Z,1509687087.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:27.804Z,1509687087.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:27.831Z,1509687087.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:28.192Z,1509687088.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:28.266Z,1509687088.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:28.594Z,1509687088.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:28.620Z,1509687088.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:28.995Z,1509687088.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:29.047Z,1509687089.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:29.393Z,1509687089.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:29.420Z,1509687089.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:29.795Z,1509687089.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:29.843Z,1509687089.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:30.212Z,1509687090.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:30.227Z,1509687090.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:30.611Z,1509687090.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:30.667Z,1509687090.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:31.013Z,1509687091.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:31.051Z,1509687091.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:31.395Z,1509687091.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:31.420Z,1509687091.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:31.793Z,1509687091.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:31.820Z,1509687091.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:32.193Z,1509687092.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:32.221Z,1509687092.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:32.595Z,1509687092.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:32.620Z,1509687092.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:33.011Z,1509687093.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:33.039Z,1509687093.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:33.416Z,1509687093.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:33.431Z,1509687093.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:33.806Z,1509687093.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:33.833Z,1509687093.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:34.195Z,1509687094.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:34.225Z,1509687094.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:34.594Z,1509687094.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:34.630Z,1509687094.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:34.992Z,1509687094.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:35.007Z,1509687095.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:35.395Z,1509687095.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:35.426Z,1509687095.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:35.795Z,1509687095.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:35.830Z,1509687095.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:36.205Z,1509687096.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:36.235Z,1509687096.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:36.614Z,1509687096.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:36.629Z,1509687096.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:37.005Z,1509687097.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:37.030Z,1509687097.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:37.392Z,1509687097.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:37.407Z,1509687097.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:37.795Z,1509687097.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:37.827Z,1509687097.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:38.196Z,1509687098.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:38.219Z,1509687098.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:38.592Z,1509687098.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:38.608Z,1509687098.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:39.005Z,1509687099.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:39.035Z,1509687099.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:39.419Z,1509687099.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:39.434Z,1509687099.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:39.806Z,1509687099.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:39.849Z,1509687099.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:40.195Z,1509687100.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:40.226Z,1509687100.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:40.588Z,1509687100.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:40.630Z,1509687100.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:40.991Z,1509687100.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:41.027Z,1509687101.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:41.398Z,1509687101.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:41.421Z,1509687101.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:41.795Z,1509687101.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:41.851Z,1509687101.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:42.206Z,1509687102.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:42.235Z,1509687102.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:42.235Z,1509687102.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 106
2017-11-03T05:31:42.235Z,1509687102.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:31:42.237Z,1509687102.237 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:42.237Z,1509687102.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 106
2017-11-03T05:31:42.237Z,1509687102.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:31:42.239Z,1509687102.239 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:42.239Z,1509687102.239 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106
2017-11-03T05:31:42.239Z,1509687102.239 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:31:42.317Z,1509687102.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:31:42.317Z,1509687102.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:31:42.317Z,1509687102.317 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:31:42.623Z,1509687102.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:42.728Z,1509687102.728 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:31:42.729Z,1509687102.729 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 106
2017-11-03T05:31:42.729Z,1509687102.729 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:31:42.729Z,1509687102.729 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 106
2017-11-03T05:31:42.730Z,1509687102.730 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:31:42.730Z,1509687102.730 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106
2017-11-03T05:31:43.009Z,1509687103.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:43.050Z,1509687103.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:31:43.051Z,1509687103.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:31:43.051Z,1509687103.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:31:43.051Z,1509687103.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:31:43.052Z,1509687103.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:31:43.052Z,1509687103.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:31:43.052Z,1509687103.052 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:31:43.053Z,1509687103.053 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:31:43.053Z,1509687103.053 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:31:43.396Z,1509687103.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:43.415Z,1509687103.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:31:43.416Z,1509687103.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:43.796Z,1509687103.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:43.818Z,1509687103.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:31:43.819Z,1509687103.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:44.199Z,1509687104.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:44.258Z,1509687104.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:31:44.259Z,1509687104.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:44.599Z,1509687104.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:44.618Z,1509687104.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:31:44.619Z,1509687104.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:45.009Z,1509687105.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:45.054Z,1509687105.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:31:45.055Z,1509687105.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:45.409Z,1509687105.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:45.458Z,1509687105.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:31:45.459Z,1509687105.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:45.810Z,1509687105.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:45.839Z,1509687105.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:31:45.840Z,1509687105.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:46.195Z,1509687106.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:46.214Z,1509687106.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:31:46.215Z,1509687106.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:46.593Z,1509687106.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:46.640Z,1509687106.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:31:46.641Z,1509687106.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:46.729Z,1509687106.729 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T05:31:46.997Z,1509687106.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:47.012Z,1509687107.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:31:47.013Z,1509687107.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:47.399Z,1509687107.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:47.414Z,1509687107.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:31:47.415Z,1509687107.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:47.799Z,1509687107.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:47.818Z,1509687107.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:31:47.819Z,1509687107.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:48.205Z,1509687108.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:48.220Z,1509687108.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:31:48.241Z,1509687108.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:48.609Z,1509687108.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:48.624Z,1509687108.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:31:48.641Z,1509687108.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:49.013Z,1509687109.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:49.043Z,1509687109.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:31:49.044Z,1509687109.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:49.400Z,1509687109.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:49.415Z,1509687109.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:31:49.416Z,1509687109.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:49.800Z,1509687109.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:49.815Z,1509687109.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:31:49.816Z,1509687109.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:50.201Z,1509687110.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:50.215Z,1509687110.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T05:31:50.216Z,1509687110.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:50.599Z,1509687110.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:50.615Z,1509687110.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:31:50.616Z,1509687110.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:51.014Z,1509687111.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:51.042Z,1509687111.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T05:31:51.043Z,1509687111.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:51.422Z,1509687111.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:51.464Z,1509687111.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:31:51.465Z,1509687111.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:51.814Z,1509687111.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:51.842Z,1509687111.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T05:31:51.843Z,1509687111.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:52.200Z,1509687112.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:52.218Z,1509687112.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:31:52.219Z,1509687112.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:52.599Z,1509687112.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:52.614Z,1509687112.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T05:31:52.615Z,1509687112.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:53.000Z,1509687113.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:53.015Z,1509687113.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T05:31:53.016Z,1509687113.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:53.400Z,1509687113.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:53.415Z,1509687113.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:31:53.416Z,1509687113.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:53.800Z,1509687113.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:53.815Z,1509687113.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:31:53.815Z,1509687113.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:54.214Z,1509687114.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:54.242Z,1509687114.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:31:54.243Z,1509687114.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:54.606Z,1509687114.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:54.621Z,1509687114.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T05:31:54.622Z,1509687114.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:55.014Z,1509687115.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:55.029Z,1509687115.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T05:31:55.029Z,1509687115.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:55.394Z,1509687115.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:55.426Z,1509687115.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T05:31:55.427Z,1509687115.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:55.793Z,1509687115.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:55.818Z,1509687115.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T05:31:55.819Z,1509687115.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:56.195Z,1509687116.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:56.238Z,1509687116.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T05:31:56.239Z,1509687116.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:56.594Z,1509687116.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:56.627Z,1509687116.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T05:31:56.628Z,1509687116.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:57.007Z,1509687117.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:57.026Z,1509687117.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T05:31:57.027Z,1509687117.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:57.417Z,1509687117.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:57.431Z,1509687117.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T05:31:57.432Z,1509687117.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:57.813Z,1509687117.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:57.863Z,1509687117.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T05:31:57.868Z,1509687117.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:58.194Z,1509687118.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:58.220Z,1509687118.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:31:58.221Z,1509687118.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:58.594Z,1509687118.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:58.642Z,1509687118.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:31:58.643Z,1509687118.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:58.992Z,1509687118.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:59.017Z,1509687119.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T05:31:59.018Z,1509687119.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:59.395Z,1509687119.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:59.462Z,1509687119.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:31:59.463Z,1509687119.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:31:59.789Z,1509687119.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:31:59.839Z,1509687119.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T05:31:59.840Z,1509687119.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:00.216Z,1509687120.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:00.231Z,1509687120.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:32:00.232Z,1509687120.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:00.613Z,1509687120.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:00.628Z,1509687120.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T05:32:00.629Z,1509687120.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:01.014Z,1509687121.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:01.028Z,1509687121.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T05:32:01.029Z,1509687121.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:01.395Z,1509687121.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:01.421Z,1509687121.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T05:32:01.422Z,1509687121.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:01.795Z,1509687121.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:01.821Z,1509687121.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T05:32:01.822Z,1509687121.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:02.195Z,1509687122.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:02.221Z,1509687122.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T05:32:02.222Z,1509687122.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:02.595Z,1509687122.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:02.627Z,1509687122.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:03.014Z,1509687123.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:03.029Z,1509687123.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:03.413Z,1509687123.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:03.428Z,1509687123.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:03.813Z,1509687123.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:03.829Z,1509687123.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:04.192Z,1509687124.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:04.224Z,1509687124.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:04.594Z,1509687124.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:04.625Z,1509687124.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:04.995Z,1509687124.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:05.025Z,1509687125.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:05.393Z,1509687125.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:05.424Z,1509687125.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:05.792Z,1509687125.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:05.830Z,1509687125.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:06.205Z,1509687126.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:06.239Z,1509687126.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:06.605Z,1509687126.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:06.635Z,1509687126.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:07.005Z,1509687127.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:07.038Z,1509687127.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:07.394Z,1509687127.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:07.429Z,1509687127.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:07.793Z,1509687127.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:07.808Z,1509687127.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:08.192Z,1509687128.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:08.228Z,1509687128.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:08.591Z,1509687128.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:08.627Z,1509687128.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:09.014Z,1509687129.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:09.029Z,1509687129.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:09.405Z,1509687129.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:09.435Z,1509687129.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:09.806Z,1509687129.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:09.829Z,1509687129.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:10.195Z,1509687130.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:10.218Z,1509687130.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:10.596Z,1509687130.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:10.619Z,1509687130.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:10.991Z,1509687130.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:11.027Z,1509687131.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:11.394Z,1509687131.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:11.409Z,1509687131.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:11.796Z,1509687131.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:11.847Z,1509687131.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:14.887Z,1509687134.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:14.911Z,1509687134.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:15.075Z,1509687135.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:15.106Z,1509687135.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:15.465Z,1509687135.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:15.495Z,1509687135.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:15.850Z,1509687135.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:15.907Z,1509687135.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:16.249Z,1509687136.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:16.264Z,1509687136.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:16.647Z,1509687136.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:16.706Z,1509687136.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:17.061Z,1509687137.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:17.114Z,1509687137.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:17.461Z,1509687137.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:17.486Z,1509687137.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:17.861Z,1509687137.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:17.886Z,1509687137.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:18.248Z,1509687138.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:18.263Z,1509687138.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:18.647Z,1509687138.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:18.663Z,1509687138.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:19.052Z,1509687139.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:19.088Z,1509687139.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:19.447Z,1509687139.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:19.462Z,1509687139.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:19.861Z,1509687139.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:19.885Z,1509687139.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:20.261Z,1509687140.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:20.286Z,1509687140.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:20.661Z,1509687140.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:20.684Z,1509687140.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:21.049Z,1509687141.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:21.065Z,1509687141.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:21.449Z,1509687141.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:21.464Z,1509687141.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:21.861Z,1509687141.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:21.884Z,1509687141.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:22.261Z,1509687142.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:22.286Z,1509687142.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:22.661Z,1509687142.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:22.685Z,1509687142.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:23.048Z,1509687143.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:23.087Z,1509687143.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:23.448Z,1509687143.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:23.463Z,1509687143.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:23.865Z,1509687143.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:23.895Z,1509687143.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:24.261Z,1509687144.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:24.285Z,1509687144.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:24.661Z,1509687144.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:24.686Z,1509687144.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:25.052Z,1509687145.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:25.088Z,1509687145.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:25.448Z,1509687145.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:25.463Z,1509687145.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:25.862Z,1509687145.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:25.885Z,1509687145.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:26.265Z,1509687146.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:26.295Z,1509687146.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:26.661Z,1509687146.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:26.685Z,1509687146.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:27.052Z,1509687147.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:27.067Z,1509687147.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:27.449Z,1509687147.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:27.464Z,1509687147.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:27.862Z,1509687147.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:27.885Z,1509687147.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:28.266Z,1509687148.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:28.283Z,1509687148.283 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T05:32:28.283Z,1509687148.283 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:32:28.283Z,1509687148.283 [BPC1](ERROR): Data Fault
2017-11-03T05:32:28.291Z,1509687148.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:28.369Z,1509687148.369 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:32:28.670Z,1509687148.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:28.699Z,1509687148.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:29.052Z,1509687149.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:29.067Z,1509687149.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:29.452Z,1509687149.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:29.467Z,1509687149.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:29.565Z,1509687149.565 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:32:29.565Z,1509687149.565 [BPC1] No Fault, FailCount= 1
2017-11-03T05:32:29.885Z,1509687149.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:29.999Z,1509687149.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:30.261Z,1509687150.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:30.293Z,1509687150.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:30.665Z,1509687150.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:30.690Z,1509687150.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:31.048Z,1509687151.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:31.102Z,1509687151.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:31.451Z,1509687151.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:31.470Z,1509687151.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:31.866Z,1509687151.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:31.891Z,1509687151.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:32.266Z,1509687152.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:32.290Z,1509687152.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:32.662Z,1509687152.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:32.692Z,1509687152.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:33.052Z,1509687153.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:33.072Z,1509687153.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:33.451Z,1509687153.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:33.465Z,1509687153.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:33.861Z,1509687153.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:33.893Z,1509687153.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:34.265Z,1509687154.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:34.290Z,1509687154.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:34.661Z,1509687154.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:34.693Z,1509687154.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:35.052Z,1509687155.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:35.067Z,1509687155.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:35.452Z,1509687155.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:35.467Z,1509687155.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:35.861Z,1509687155.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:35.892Z,1509687155.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:36.261Z,1509687156.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:36.292Z,1509687156.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:36.665Z,1509687156.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:36.689Z,1509687156.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:37.049Z,1509687157.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:37.063Z,1509687157.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:37.447Z,1509687157.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:37.463Z,1509687157.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:37.866Z,1509687157.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:37.889Z,1509687157.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:38.262Z,1509687158.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:38.292Z,1509687158.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:38.661Z,1509687158.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:38.691Z,1509687158.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:39.052Z,1509687159.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:39.067Z,1509687159.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:39.451Z,1509687159.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:39.470Z,1509687159.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:39.861Z,1509687159.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:39.893Z,1509687159.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:40.265Z,1509687160.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:40.290Z,1509687160.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:40.661Z,1509687160.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:40.692Z,1509687160.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:41.052Z,1509687161.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:41.094Z,1509687161.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:41.452Z,1509687161.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:41.467Z,1509687161.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:41.861Z,1509687161.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:41.892Z,1509687161.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:42.266Z,1509687162.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:42.289Z,1509687162.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:42.661Z,1509687162.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:42.691Z,1509687162.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:43.051Z,1509687163.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:43.112Z,1509687163.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:43.448Z,1509687163.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:43.514Z,1509687163.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:43.869Z,1509687163.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:43.891Z,1509687163.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:44.265Z,1509687164.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:44.307Z,1509687164.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:44.666Z,1509687164.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:44.695Z,1509687164.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:45.057Z,1509687165.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:45.115Z,1509687165.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:45.451Z,1509687165.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:45.495Z,1509687165.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:45.866Z,1509687165.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:45.894Z,1509687165.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:46.270Z,1509687166.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:46.299Z,1509687166.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:46.666Z,1509687166.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:46.695Z,1509687166.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:47.056Z,1509687167.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:47.072Z,1509687167.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:47.451Z,1509687167.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:47.466Z,1509687167.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:47.865Z,1509687167.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:47.896Z,1509687167.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:48.265Z,1509687168.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:48.296Z,1509687168.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:48.669Z,1509687168.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:48.691Z,1509687168.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:49.050Z,1509687169.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:49.070Z,1509687169.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:49.452Z,1509687169.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:49.467Z,1509687169.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:49.865Z,1509687169.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:49.896Z,1509687169.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:50.257Z,1509687170.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:50.272Z,1509687170.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:50.666Z,1509687170.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:50.696Z,1509687170.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:51.056Z,1509687171.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:51.071Z,1509687171.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:51.451Z,1509687171.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:51.466Z,1509687171.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:51.865Z,1509687171.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:51.896Z,1509687171.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:52.269Z,1509687172.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:52.292Z,1509687172.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:52.665Z,1509687172.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:52.695Z,1509687172.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:53.052Z,1509687173.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:53.067Z,1509687173.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:53.451Z,1509687173.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:53.467Z,1509687173.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:53.865Z,1509687173.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:53.894Z,1509687173.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:54.265Z,1509687174.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:54.296Z,1509687174.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:54.665Z,1509687174.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:54.694Z,1509687174.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:55.052Z,1509687175.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:55.066Z,1509687175.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:55.453Z,1509687175.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:55.468Z,1509687175.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:55.866Z,1509687175.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:55.896Z,1509687175.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:56.265Z,1509687176.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:56.295Z,1509687176.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:56.665Z,1509687176.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:56.696Z,1509687176.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:57.057Z,1509687177.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:57.087Z,1509687177.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:57.450Z,1509687177.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:57.522Z,1509687177.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:57.863Z,1509687177.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:57.887Z,1509687177.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:58.263Z,1509687178.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:58.283Z,1509687178.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:58.664Z,1509687178.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:58.710Z,1509687178.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:59.057Z,1509687179.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:59.072Z,1509687179.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:59.456Z,1509687179.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:59.514Z,1509687179.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:32:59.864Z,1509687179.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:32:59.910Z,1509687179.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:00.263Z,1509687180.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:00.283Z,1509687180.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:00.663Z,1509687180.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:00.686Z,1509687180.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:01.059Z,1509687181.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:01.074Z,1509687181.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:01.457Z,1509687181.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:01.472Z,1509687181.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:01.863Z,1509687181.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:01.883Z,1509687181.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:02.265Z,1509687182.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:02.280Z,1509687182.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:02.663Z,1509687182.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:02.683Z,1509687182.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:03.056Z,1509687183.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:03.071Z,1509687183.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:03.452Z,1509687183.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:03.467Z,1509687183.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:03.863Z,1509687183.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:03.883Z,1509687183.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:04.263Z,1509687184.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:04.283Z,1509687184.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:04.665Z,1509687184.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:04.680Z,1509687184.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:05.060Z,1509687185.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:05.075Z,1509687185.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:05.456Z,1509687185.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:05.471Z,1509687185.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:05.865Z,1509687185.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:05.880Z,1509687185.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:06.264Z,1509687186.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:06.285Z,1509687186.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:06.664Z,1509687186.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:06.679Z,1509687186.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:07.061Z,1509687187.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:07.076Z,1509687187.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:07.456Z,1509687187.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:07.471Z,1509687187.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:07.865Z,1509687187.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:07.880Z,1509687187.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:08.265Z,1509687188.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:08.280Z,1509687188.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:08.665Z,1509687188.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:08.680Z,1509687188.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:09.058Z,1509687189.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:09.073Z,1509687189.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:09.461Z,1509687189.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:09.476Z,1509687189.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:09.865Z,1509687189.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:09.881Z,1509687189.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:10.264Z,1509687190.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:10.280Z,1509687190.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:10.665Z,1509687190.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:10.680Z,1509687190.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:11.060Z,1509687191.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:11.075Z,1509687191.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:11.458Z,1509687191.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:11.473Z,1509687191.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:11.865Z,1509687191.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:11.925Z,1509687191.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:14.966Z,1509687194.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:15.026Z,1509687195.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:15.169Z,1509687195.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:15.210Z,1509687195.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:15.554Z,1509687195.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:15.569Z,1509687195.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:15.959Z,1509687195.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:16.018Z,1509687196.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:16.354Z,1509687196.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:16.369Z,1509687196.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:16.754Z,1509687196.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:16.807Z,1509687196.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:17.165Z,1509687197.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:17.215Z,1509687197.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:17.564Z,1509687197.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:17.579Z,1509687197.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:17.965Z,1509687197.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:17.979Z,1509687197.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:18.355Z,1509687198.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:18.375Z,1509687198.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:18.752Z,1509687198.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:18.768Z,1509687198.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:19.153Z,1509687199.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:19.169Z,1509687199.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:19.555Z,1509687199.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:19.570Z,1509687199.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:19.964Z,1509687199.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:19.980Z,1509687199.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:20.361Z,1509687200.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:20.376Z,1509687200.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:20.764Z,1509687200.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:20.780Z,1509687200.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:21.152Z,1509687201.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:21.167Z,1509687201.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:21.550Z,1509687201.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:21.570Z,1509687201.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:21.955Z,1509687201.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:21.975Z,1509687201.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:22.356Z,1509687202.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:22.371Z,1509687202.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:22.755Z,1509687202.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:22.770Z,1509687202.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:23.159Z,1509687203.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:23.174Z,1509687203.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:23.564Z,1509687203.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:23.579Z,1509687203.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:23.964Z,1509687203.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:23.979Z,1509687203.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:24.354Z,1509687204.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:24.371Z,1509687204.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:24.751Z,1509687204.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:24.767Z,1509687204.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:25.156Z,1509687205.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:25.171Z,1509687205.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:25.554Z,1509687205.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:25.575Z,1509687205.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:25.964Z,1509687205.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:25.979Z,1509687205.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:26.364Z,1509687206.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:26.379Z,1509687206.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:26.754Z,1509687206.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:26.783Z,1509687206.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:27.153Z,1509687207.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:27.170Z,1509687207.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:27.555Z,1509687207.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:27.570Z,1509687207.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:27.955Z,1509687207.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:27.975Z,1509687207.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:28.353Z,1509687208.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:28.369Z,1509687208.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:28.754Z,1509687208.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:28.769Z,1509687208.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:29.165Z,1509687209.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:29.254Z,1509687209.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:29.569Z,1509687209.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:29.584Z,1509687209.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:29.965Z,1509687209.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:29.980Z,1509687209.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:30.344Z,1509687210.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:30.414Z,1509687210.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:30.745Z,1509687210.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:30.779Z,1509687210.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:31.146Z,1509687211.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:31.195Z,1509687211.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:31.548Z,1509687211.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:31.603Z,1509687211.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:31.958Z,1509687211.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:31.979Z,1509687211.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:32.358Z,1509687212.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:32.384Z,1509687212.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:32.758Z,1509687212.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:32.784Z,1509687212.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:33.147Z,1509687213.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:33.178Z,1509687213.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:33.547Z,1509687213.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:33.579Z,1509687213.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:33.941Z,1509687213.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:33.956Z,1509687213.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:34.345Z,1509687214.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:34.381Z,1509687214.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:34.747Z,1509687214.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:34.785Z,1509687214.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:35.157Z,1509687215.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:35.184Z,1509687215.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:35.557Z,1509687215.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:35.583Z,1509687215.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:35.956Z,1509687215.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:35.982Z,1509687215.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:36.341Z,1509687216.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:36.356Z,1509687216.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:36.745Z,1509687216.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:36.760Z,1509687216.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:37.145Z,1509687217.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:37.159Z,1509687217.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:37.545Z,1509687217.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:37.560Z,1509687217.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:37.957Z,1509687217.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:37.987Z,1509687217.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:38.371Z,1509687218.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:38.390Z,1509687218.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:38.758Z,1509687218.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:38.787Z,1509687218.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:39.145Z,1509687219.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:39.160Z,1509687219.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:39.547Z,1509687219.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:39.582Z,1509687219.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:39.951Z,1509687219.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:39.979Z,1509687219.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:40.345Z,1509687220.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:40.377Z,1509687220.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:40.744Z,1509687220.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:40.759Z,1509687220.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:41.158Z,1509687221.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:41.187Z,1509687221.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:41.557Z,1509687221.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:41.581Z,1509687221.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:41.957Z,1509687221.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:41.986Z,1509687221.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:42.351Z,1509687222.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:42.379Z,1509687222.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:42.747Z,1509687222.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:42.782Z,1509687222.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:43.148Z,1509687223.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:43.182Z,1509687223.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:43.545Z,1509687223.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:43.618Z,1509687223.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:43.958Z,1509687223.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:43.981Z,1509687223.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:44.357Z,1509687224.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:44.407Z,1509687224.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:44.758Z,1509687224.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:44.787Z,1509687224.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:45.144Z,1509687225.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:45.194Z,1509687225.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:45.543Z,1509687225.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:45.595Z,1509687225.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:45.943Z,1509687225.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:45.963Z,1509687225.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:46.344Z,1509687226.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:46.360Z,1509687226.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:46.743Z,1509687226.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:46.758Z,1509687226.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:47.158Z,1509687227.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:47.181Z,1509687227.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:47.557Z,1509687227.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:47.581Z,1509687227.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:47.957Z,1509687227.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:47.982Z,1509687227.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:48.343Z,1509687228.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:48.358Z,1509687228.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:48.743Z,1509687228.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:48.759Z,1509687228.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:49.144Z,1509687229.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:49.159Z,1509687229.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:49.545Z,1509687229.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:49.560Z,1509687229.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:49.957Z,1509687229.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:49.981Z,1509687229.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:50.357Z,1509687230.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:50.382Z,1509687230.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:50.757Z,1509687230.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:50.781Z,1509687230.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:51.144Z,1509687231.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:51.159Z,1509687231.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:51.544Z,1509687231.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:51.558Z,1509687231.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:51.943Z,1509687231.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:51.963Z,1509687231.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:52.344Z,1509687232.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:52.359Z,1509687232.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:52.744Z,1509687232.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:52.759Z,1509687232.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:53.157Z,1509687233.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:53.181Z,1509687233.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:53.561Z,1509687233.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:53.591Z,1509687233.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:53.961Z,1509687233.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:53.990Z,1509687233.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:54.344Z,1509687234.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:54.360Z,1509687234.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:54.747Z,1509687234.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:54.763Z,1509687234.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:55.145Z,1509687235.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:55.160Z,1509687235.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:55.551Z,1509687235.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:55.587Z,1509687235.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:55.958Z,1509687235.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:55.982Z,1509687235.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:56.357Z,1509687236.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:56.382Z,1509687236.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:56.758Z,1509687236.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:56.783Z,1509687236.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:57.145Z,1509687237.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:57.161Z,1509687237.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:57.544Z,1509687237.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:57.607Z,1509687237.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:57.944Z,1509687237.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:58.002Z,1509687238.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:58.351Z,1509687238.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:58.367Z,1509687238.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:58.744Z,1509687238.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:58.788Z,1509687238.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:59.161Z,1509687239.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:59.183Z,1509687239.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:59.565Z,1509687239.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:33:59.629Z,1509687239.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:33:59.958Z,1509687239.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:00.003Z,1509687240.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:00.343Z,1509687240.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:00.359Z,1509687240.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:00.745Z,1509687240.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:00.760Z,1509687240.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:01.143Z,1509687241.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:01.158Z,1509687241.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:01.543Z,1509687241.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:01.563Z,1509687241.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:01.957Z,1509687241.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:01.991Z,1509687241.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:02.357Z,1509687242.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:02.372Z,1509687242.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:02.758Z,1509687242.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:02.789Z,1509687242.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:03.148Z,1509687243.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:03.163Z,1509687243.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:03.543Z,1509687243.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:03.558Z,1509687243.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:03.943Z,1509687243.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:03.959Z,1509687243.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:04.344Z,1509687244.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:04.359Z,1509687244.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:04.743Z,1509687244.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:04.758Z,1509687244.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:05.157Z,1509687245.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:05.193Z,1509687245.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:05.565Z,1509687245.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:05.599Z,1509687245.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:05.965Z,1509687245.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:05.980Z,1509687245.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:06.347Z,1509687246.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:06.367Z,1509687246.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:06.751Z,1509687246.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:06.767Z,1509687246.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:07.152Z,1509687247.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:07.167Z,1509687247.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:07.552Z,1509687247.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:07.567Z,1509687247.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:07.958Z,1509687247.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:07.973Z,1509687247.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:08.365Z,1509687248.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:08.398Z,1509687248.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:08.758Z,1509687248.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:08.773Z,1509687248.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:09.151Z,1509687249.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:09.167Z,1509687249.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:09.552Z,1509687249.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:09.574Z,1509687249.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:09.952Z,1509687249.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:09.975Z,1509687249.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:10.353Z,1509687250.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:10.368Z,1509687250.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:10.752Z,1509687250.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:10.767Z,1509687250.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:11.158Z,1509687251.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:11.173Z,1509687251.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:11.558Z,1509687251.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:11.574Z,1509687251.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:11.959Z,1509687251.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:12.011Z,1509687252.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:15.029Z,1509687255.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:15.079Z,1509687255.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:15.223Z,1509687255.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:15.258Z,1509687255.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:15.630Z,1509687255.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:15.654Z,1509687255.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:16.033Z,1509687256.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:16.102Z,1509687256.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:16.429Z,1509687256.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:16.453Z,1509687256.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:16.828Z,1509687256.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:16.886Z,1509687256.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:17.217Z,1509687257.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:17.266Z,1509687257.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:17.616Z,1509687257.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:17.631Z,1509687257.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:18.030Z,1509687258.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:18.060Z,1509687258.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:18.430Z,1509687258.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:18.454Z,1509687258.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:18.834Z,1509687258.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:18.866Z,1509687258.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:19.215Z,1509687259.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:19.231Z,1509687259.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:19.615Z,1509687259.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:19.630Z,1509687259.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:20.017Z,1509687260.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:20.032Z,1509687260.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:20.418Z,1509687260.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:20.433Z,1509687260.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:20.829Z,1509687260.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:20.858Z,1509687260.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:21.229Z,1509687261.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:21.254Z,1509687261.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:21.629Z,1509687261.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:21.659Z,1509687261.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:22.019Z,1509687262.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:22.034Z,1509687262.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:22.415Z,1509687262.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:22.430Z,1509687262.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:22.837Z,1509687262.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:22.867Z,1509687262.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:23.225Z,1509687263.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:23.257Z,1509687263.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:23.633Z,1509687263.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:23.667Z,1509687263.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:24.020Z,1509687264.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:24.035Z,1509687264.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:24.415Z,1509687264.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:24.435Z,1509687264.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:24.833Z,1509687264.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:24.863Z,1509687264.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:25.233Z,1509687265.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:25.267Z,1509687265.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:25.630Z,1509687265.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:25.661Z,1509687265.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:26.020Z,1509687266.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:26.035Z,1509687266.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:26.420Z,1509687266.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:26.435Z,1509687266.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:26.834Z,1509687266.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:26.869Z,1509687266.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:27.233Z,1509687267.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:27.269Z,1509687267.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:27.634Z,1509687267.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:27.668Z,1509687267.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:28.024Z,1509687268.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:28.039Z,1509687268.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:28.419Z,1509687268.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:28.435Z,1509687268.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:28.838Z,1509687268.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:28.869Z,1509687268.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:29.233Z,1509687269.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:29.287Z,1509687269.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:29.633Z,1509687269.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:29.691Z,1509687269.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:30.020Z,1509687270.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:30.036Z,1509687270.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:30.419Z,1509687270.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:30.475Z,1509687270.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:30.833Z,1509687270.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:30.867Z,1509687270.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:31.233Z,1509687271.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:31.286Z,1509687271.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:31.625Z,1509687271.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:31.675Z,1509687271.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:32.020Z,1509687272.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:32.035Z,1509687272.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:32.420Z,1509687272.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:32.435Z,1509687272.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:32.833Z,1509687272.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:32.866Z,1509687272.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:33.233Z,1509687273.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:33.270Z,1509687273.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:33.638Z,1509687273.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:33.668Z,1509687273.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:34.020Z,1509687274.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:34.035Z,1509687274.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:34.420Z,1509687274.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:34.435Z,1509687274.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:34.833Z,1509687274.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:34.870Z,1509687274.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:35.225Z,1509687275.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:35.241Z,1509687275.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:35.633Z,1509687275.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:35.667Z,1509687275.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:36.021Z,1509687276.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:36.036Z,1509687276.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:36.419Z,1509687276.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:36.435Z,1509687276.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:36.833Z,1509687276.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:36.870Z,1509687276.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:37.233Z,1509687277.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:37.267Z,1509687277.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:37.638Z,1509687277.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:37.675Z,1509687277.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:38.025Z,1509687278.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:38.041Z,1509687278.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:38.420Z,1509687278.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:38.435Z,1509687278.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:38.826Z,1509687278.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:38.841Z,1509687278.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:39.229Z,1509687279.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:39.245Z,1509687279.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:39.638Z,1509687279.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:39.669Z,1509687279.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:40.027Z,1509687280.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:40.042Z,1509687280.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:40.425Z,1509687280.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:40.441Z,1509687280.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:40.830Z,1509687280.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:40.846Z,1509687280.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:41.234Z,1509687281.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:41.255Z,1509687281.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:41.630Z,1509687281.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:41.654Z,1509687281.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:42.027Z,1509687282.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:42.043Z,1509687282.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:42.426Z,1509687282.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:42.442Z,1509687282.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:42.830Z,1509687282.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:42.846Z,1509687282.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:43.233Z,1509687283.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:43.255Z,1509687283.255 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:43.255Z,1509687283.255 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 107
2017-11-03T05:34:43.256Z,1509687283.256 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:34:43.274Z,1509687283.274 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:43.274Z,1509687283.274 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 107
2017-11-03T05:34:43.274Z,1509687283.274 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:34:43.276Z,1509687283.276 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:43.276Z,1509687283.276 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107
2017-11-03T05:34:43.276Z,1509687283.276 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:34:43.373Z,1509687283.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:34:43.373Z,1509687283.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:34:43.373Z,1509687283.373 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:34:43.636Z,1509687283.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:43.804Z,1509687283.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:34:43.805Z,1509687283.805 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 107
2017-11-03T05:34:43.805Z,1509687283.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:34:43.805Z,1509687283.805 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 107
2017-11-03T05:34:43.806Z,1509687283.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:34:43.806Z,1509687283.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107
2017-11-03T05:34:44.019Z,1509687284.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:44.045Z,1509687284.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:34:44.045Z,1509687284.045 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:34:44.045Z,1509687284.045 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:34:44.046Z,1509687284.046 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:34:44.046Z,1509687284.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:34:44.047Z,1509687284.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:34:44.047Z,1509687284.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:34:44.047Z,1509687284.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:34:44.048Z,1509687284.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:34:44.419Z,1509687284.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:44.471Z,1509687284.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:34:44.472Z,1509687284.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:44.833Z,1509687284.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:44.857Z,1509687284.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:34:44.858Z,1509687284.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:45.237Z,1509687285.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:45.297Z,1509687285.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:34:45.298Z,1509687285.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:45.634Z,1509687285.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:45.686Z,1509687285.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:34:45.687Z,1509687285.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:46.020Z,1509687286.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:46.050Z,1509687286.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:34:46.051Z,1509687286.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:46.416Z,1509687286.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:46.450Z,1509687286.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:34:46.451Z,1509687286.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:46.829Z,1509687286.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:46.855Z,1509687286.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:34:46.856Z,1509687286.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:47.242Z,1509687287.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:47.256Z,1509687287.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:34:47.257Z,1509687287.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:47.630Z,1509687287.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:47.655Z,1509687287.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:34:47.657Z,1509687287.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:48.017Z,1509687288.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:48.031Z,1509687288.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:34:48.032Z,1509687288.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:48.415Z,1509687288.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:48.430Z,1509687288.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:34:48.431Z,1509687288.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:48.829Z,1509687288.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:48.852Z,1509687288.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:34:48.853Z,1509687288.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:49.229Z,1509687289.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:49.257Z,1509687289.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:34:49.258Z,1509687289.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:49.629Z,1509687289.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:49.657Z,1509687289.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:34:49.658Z,1509687289.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:50.019Z,1509687290.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:50.034Z,1509687290.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:34:50.035Z,1509687290.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:50.415Z,1509687290.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:50.429Z,1509687290.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:34:50.430Z,1509687290.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:50.829Z,1509687290.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:50.863Z,1509687290.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:34:50.864Z,1509687290.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:51.237Z,1509687291.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:51.263Z,1509687291.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T05:34:51.265Z,1509687291.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:51.629Z,1509687291.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:51.660Z,1509687291.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:34:51.661Z,1509687291.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:52.016Z,1509687292.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:52.031Z,1509687292.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T05:34:52.032Z,1509687292.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:52.422Z,1509687292.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:52.459Z,1509687292.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:34:52.465Z,1509687292.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:52.837Z,1509687292.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:52.874Z,1509687292.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T05:34:52.875Z,1509687292.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:53.237Z,1509687293.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:53.270Z,1509687293.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:34:53.271Z,1509687293.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:53.630Z,1509687293.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:53.644Z,1509687293.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T05:34:53.666Z,1509687293.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:54.024Z,1509687294.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:54.046Z,1509687294.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T05:34:54.047Z,1509687294.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:54.423Z,1509687294.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:54.442Z,1509687294.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:34:54.443Z,1509687294.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:54.830Z,1509687294.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:54.845Z,1509687294.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:34:54.846Z,1509687294.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:55.237Z,1509687295.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:55.275Z,1509687295.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:34:55.276Z,1509687295.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:55.630Z,1509687295.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:55.644Z,1509687295.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T05:34:55.645Z,1509687295.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:56.024Z,1509687296.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:56.039Z,1509687296.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T05:34:56.040Z,1509687296.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:56.421Z,1509687296.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:56.442Z,1509687296.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T05:34:56.443Z,1509687296.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:56.830Z,1509687296.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:56.845Z,1509687296.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T05:34:56.846Z,1509687296.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:57.230Z,1509687297.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:57.250Z,1509687297.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T05:34:57.251Z,1509687297.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:57.630Z,1509687297.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:57.712Z,1509687297.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T05:34:57.713Z,1509687297.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:58.025Z,1509687298.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:58.040Z,1509687298.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T05:34:58.041Z,1509687298.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:58.426Z,1509687298.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:58.479Z,1509687298.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T05:34:58.480Z,1509687298.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:58.834Z,1509687298.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:58.849Z,1509687298.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T05:34:58.850Z,1509687298.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:59.231Z,1509687299.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:59.278Z,1509687299.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:34:59.279Z,1509687299.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:34:59.631Z,1509687299.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:34:59.647Z,1509687299.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:34:59.648Z,1509687299.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:00.027Z,1509687300.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:00.075Z,1509687300.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T05:35:00.076Z,1509687300.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:00.424Z,1509687300.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:00.439Z,1509687300.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:35:00.440Z,1509687300.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:00.831Z,1509687300.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:00.855Z,1509687300.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T05:35:00.856Z,1509687300.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:01.233Z,1509687301.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:01.247Z,1509687301.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:35:01.249Z,1509687301.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:01.631Z,1509687301.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:01.650Z,1509687301.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T05:35:01.651Z,1509687301.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:02.024Z,1509687302.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:02.039Z,1509687302.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T05:35:02.040Z,1509687302.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:02.420Z,1509687302.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:02.434Z,1509687302.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T05:35:02.435Z,1509687302.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:02.831Z,1509687302.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:02.850Z,1509687302.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T05:35:02.851Z,1509687302.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:03.232Z,1509687303.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:03.254Z,1509687303.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T05:35:03.255Z,1509687303.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:03.632Z,1509687303.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:03.655Z,1509687303.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:04.025Z,1509687304.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:04.040Z,1509687304.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:04.423Z,1509687304.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:04.439Z,1509687304.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:04.832Z,1509687304.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:04.847Z,1509687304.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:05.233Z,1509687305.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:05.249Z,1509687305.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:05.631Z,1509687305.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:05.655Z,1509687305.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:06.027Z,1509687306.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:06.042Z,1509687306.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:06.424Z,1509687306.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:06.439Z,1509687306.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:06.831Z,1509687306.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:06.851Z,1509687306.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:07.233Z,1509687307.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:07.274Z,1509687307.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:07.631Z,1509687307.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:07.647Z,1509687307.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:08.024Z,1509687308.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:08.040Z,1509687308.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:08.420Z,1509687308.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:08.435Z,1509687308.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:08.832Z,1509687308.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:08.849Z,1509687308.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:09.231Z,1509687309.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:09.251Z,1509687309.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:09.632Z,1509687309.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:09.654Z,1509687309.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:10.027Z,1509687310.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:10.043Z,1509687310.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:10.426Z,1509687310.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:10.448Z,1509687310.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:10.832Z,1509687310.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:10.847Z,1509687310.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:11.231Z,1509687311.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:11.251Z,1509687311.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:11.254Z,1509687311.254 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T05:35:11.254Z,1509687311.254 [Default:CheckIn:C.Wait] Stopped
2017-11-03T05:35:11.254Z,1509687311.254 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T05:35:11.254Z,1509687311.254 [Default:CheckIn:D] Running Loop=1
2017-11-03T05:35:11.631Z,1509687311.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:11.651Z,1509687311.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:11.654Z,1509687311.654 [Default:CheckIn:D] Stopped
2017-11-03T05:35:11.654Z,1509687311.654 [Default:CheckIn:E] Running Loop=1
2017-11-03T05:35:12.028Z,1509687312.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:12.123Z,1509687312.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:12.127Z,1509687312.127 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 320.068132 min 
2017-11-03T05:35:12.127Z,1509687312.127 [Default:CheckIn:E] Stopped
2017-11-03T05:35:12.127Z,1509687312.127 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T05:35:12.127Z,1509687312.127 [Default:CheckIn] Stopped
2017-11-03T05:35:12.127Z,1509687312.127 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T05:35:12.127Z,1509687312.127 [Default:CheckIn](INFO): Running loop #32
2017-11-03T05:35:12.128Z,1509687312.128 [Default:CheckIn] Running Loop=32
2017-11-03T05:35:12.128Z,1509687312.128 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T05:35:12.128Z,1509687312.128 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T05:35:15.102Z,1509687315.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:15.130Z,1509687315.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:15.289Z,1509687315.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:15.305Z,1509687315.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:15.687Z,1509687315.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:15.706Z,1509687315.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:16.090Z,1509687316.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:16.143Z,1509687316.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:16.474Z,1509687316.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:16.489Z,1509687316.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:16.862Z,1509687316.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:16.925Z,1509687316.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:17.275Z,1509687317.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:17.334Z,1509687317.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:17.678Z,1509687317.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:17.685Z,1509687317.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x40297 got:0x56896
2017-11-03T05:35:17.711Z,1509687317.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:18.085Z,1509687318.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:18.100Z,1509687318.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:18.484Z,1509687318.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:18.500Z,1509687318.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:18.886Z,1509687318.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:18.901Z,1509687318.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:19.277Z,1509687319.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:19.303Z,1509687319.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:19.674Z,1509687319.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:19.689Z,1509687319.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:20.074Z,1509687320.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:20.093Z,1509687320.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:20.460Z,1509687320.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:20.506Z,1509687320.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:20.888Z,1509687320.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:20.895Z,1509687320.895 [PNI_TCM](ERROR): CRC does not match. Expected:0x47643 got:0x16910
2017-11-03T05:35:20.934Z,1509687320.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:21.286Z,1509687321.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:21.301Z,1509687321.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:21.689Z,1509687321.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:21.710Z,1509687321.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:22.061Z,1509687322.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:22.106Z,1509687322.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:22.479Z,1509687322.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:22.495Z,1509687322.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:22.878Z,1509687322.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:22.893Z,1509687322.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:23.278Z,1509687323.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:23.293Z,1509687323.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:23.673Z,1509687323.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:23.710Z,1509687323.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:24.092Z,1509687324.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:24.098Z,1509687324.098 [PNI_TCM](ERROR): CRC does not match. Expected:0x43755 got:0x39605
2017-11-03T05:35:24.128Z,1509687324.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:24.490Z,1509687324.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:24.505Z,1509687324.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:24.886Z,1509687324.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:24.901Z,1509687324.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:25.276Z,1509687325.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:25.327Z,1509687325.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:25.677Z,1509687325.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:25.685Z,1509687325.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x24511 got:0x56960
2017-11-03T05:35:25.711Z,1509687325.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:26.074Z,1509687326.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:26.093Z,1509687326.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:26.477Z,1509687326.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:26.493Z,1509687326.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:26.887Z,1509687326.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:26.902Z,1509687326.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:27.288Z,1509687327.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:27.304Z,1509687327.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:27.685Z,1509687327.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:27.701Z,1509687327.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:28.076Z,1509687328.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:28.091Z,1509687328.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:28.473Z,1509687328.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:28.511Z,1509687328.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:28.880Z,1509687328.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:28.886Z,1509687328.886 [PNI_TCM](ERROR): CRC does not match. Expected:0x44015 got:0x57024
2017-11-03T05:35:28.907Z,1509687328.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:29.278Z,1509687329.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:29.343Z,1509687329.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:29.667Z,1509687329.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:29.719Z,1509687329.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:30.090Z,1509687330.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:30.105Z,1509687330.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:30.490Z,1509687330.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:30.550Z,1509687330.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:30.885Z,1509687330.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:30.901Z,1509687330.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:31.267Z,1509687331.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:31.323Z,1509687331.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:31.697Z,1509687331.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:31.755Z,1509687331.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:32.065Z,1509687332.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:32.085Z,1509687332.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x33864 got:0x179
2017-11-03T05:35:32.111Z,1509687332.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:32.466Z,1509687332.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:32.492Z,1509687332.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:32.889Z,1509687332.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:32.904Z,1509687332.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:33.288Z,1509687333.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:33.303Z,1509687333.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:33.688Z,1509687333.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:33.703Z,1509687333.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:34.058Z,1509687334.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:34.098Z,1509687334.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:34.467Z,1509687334.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:34.484Z,1509687334.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x33716 got:0x57280
2017-11-03T05:35:34.510Z,1509687334.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:34.867Z,1509687334.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:34.896Z,1509687334.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:35.269Z,1509687335.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:35.296Z,1509687335.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:35.666Z,1509687335.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:35.700Z,1509687335.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:36.082Z,1509687336.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:36.097Z,1509687336.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:36.485Z,1509687336.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:36.500Z,1509687336.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:36.887Z,1509687336.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:36.910Z,1509687336.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:37.269Z,1509687337.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:37.295Z,1509687337.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:37.667Z,1509687337.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:37.693Z,1509687337.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:38.067Z,1509687338.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:38.097Z,1509687338.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:38.461Z,1509687338.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:38.497Z,1509687338.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:38.890Z,1509687338.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:38.897Z,1509687338.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x59239 got:0x6593
2017-11-03T05:35:38.923Z,1509687338.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:39.289Z,1509687339.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:39.304Z,1509687339.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:39.690Z,1509687339.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:39.704Z,1509687339.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:40.069Z,1509687340.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:40.096Z,1509687340.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:40.467Z,1509687340.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:40.501Z,1509687340.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:40.869Z,1509687340.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:40.895Z,1509687340.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:41.268Z,1509687341.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:41.298Z,1509687341.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:41.665Z,1509687341.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:41.694Z,1509687341.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:42.083Z,1509687342.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:42.099Z,1509687342.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:42.489Z,1509687342.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:42.511Z,1509687342.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:42.886Z,1509687342.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:42.907Z,1509687342.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:43.268Z,1509687343.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:43.296Z,1509687343.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:43.668Z,1509687343.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:43.719Z,1509687343.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:44.068Z,1509687344.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:44.126Z,1509687344.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:44.466Z,1509687344.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:44.498Z,1509687344.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:44.887Z,1509687344.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:44.907Z,1509687344.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:45.286Z,1509687345.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:45.343Z,1509687345.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:45.676Z,1509687345.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:45.706Z,1509687345.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:46.056Z,1509687346.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:46.123Z,1509687346.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:46.465Z,1509687346.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:46.539Z,1509687346.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:46.862Z,1509687346.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:46.898Z,1509687346.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:47.270Z,1509687347.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:47.305Z,1509687347.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:47.665Z,1509687347.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:47.710Z,1509687347.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:48.079Z,1509687348.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:48.105Z,1509687348.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:48.478Z,1509687348.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:48.526Z,1509687348.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:48.877Z,1509687348.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:48.903Z,1509687348.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:49.264Z,1509687349.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:49.306Z,1509687349.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:49.665Z,1509687349.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:49.683Z,1509687349.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:50.066Z,1509687350.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:50.081Z,1509687350.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:50.466Z,1509687350.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:50.481Z,1509687350.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:50.879Z,1509687350.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:50.904Z,1509687350.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:51.283Z,1509687351.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:51.306Z,1509687351.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:51.678Z,1509687351.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:51.706Z,1509687351.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:52.066Z,1509687352.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:52.081Z,1509687352.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:52.465Z,1509687352.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:52.506Z,1509687352.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:52.863Z,1509687352.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:52.882Z,1509687352.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:53.266Z,1509687353.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:53.305Z,1509687353.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:53.666Z,1509687353.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:53.681Z,1509687353.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:54.083Z,1509687354.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:54.108Z,1509687354.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:54.479Z,1509687354.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:54.503Z,1509687354.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:54.878Z,1509687354.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:54.901Z,1509687354.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:55.267Z,1509687355.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:55.282Z,1509687355.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:55.665Z,1509687355.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:55.706Z,1509687355.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:56.065Z,1509687356.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:56.083Z,1509687356.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:56.466Z,1509687356.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:56.481Z,1509687356.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:56.903Z,1509687356.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:56.919Z,1509687356.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:57.286Z,1509687357.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:57.319Z,1509687357.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:57.686Z,1509687357.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:57.717Z,1509687357.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:58.071Z,1509687358.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:58.086Z,1509687358.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:58.476Z,1509687358.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:58.551Z,1509687358.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:58.873Z,1509687358.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:58.966Z,1509687358.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:59.277Z,1509687359.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:59.283Z,1509687359.283 [PNI_TCM](ERROR): CRC does not match. Expected:0x25332 got:0x39611
2017-11-03T05:35:59.307Z,1509687359.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:35:59.675Z,1509687359.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:35:59.703Z,1509687359.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:00.091Z,1509687360.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:00.135Z,1509687360.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:00.484Z,1509687360.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:00.499Z,1509687360.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:00.884Z,1509687360.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:00.958Z,1509687360.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:01.299Z,1509687361.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:01.366Z,1509687361.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:01.663Z,1509687361.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:01.703Z,1509687361.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:02.070Z,1509687362.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:02.137Z,1509687362.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:02.465Z,1509687362.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:02.488Z,1509687362.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x64976 got:0x0
2017-11-03T05:36:02.544Z,1509687362.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:02.888Z,1509687362.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:02.911Z,1509687362.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:03.295Z,1509687363.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:03.323Z,1509687363.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:03.688Z,1509687363.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:03.747Z,1509687363.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:04.066Z,1509687364.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:04.107Z,1509687364.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:04.468Z,1509687364.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:04.483Z,1509687364.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:04.902Z,1509687364.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:04.931Z,1509687364.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:05.266Z,1509687365.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:05.312Z,1509687365.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:05.666Z,1509687365.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:05.713Z,1509687365.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:06.078Z,1509687366.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:06.126Z,1509687366.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:06.480Z,1509687366.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:06.521Z,1509687366.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:06.878Z,1509687366.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:06.923Z,1509687366.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:07.283Z,1509687367.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:07.299Z,1509687367.299 [PNI_TCM](ERROR): CRC does not match. Expected:0x60541 got:0x0
2017-11-03T05:36:07.352Z,1509687367.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:07.682Z,1509687367.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:07.715Z,1509687367.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:08.068Z,1509687368.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:08.116Z,1509687368.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:08.478Z,1509687368.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:08.519Z,1509687368.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:08.878Z,1509687368.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:08.885Z,1509687368.885 [PNI_TCM](ERROR): CRC does not match. Expected:0x4704 got:0x16384
2017-11-03T05:36:08.920Z,1509687368.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:09.280Z,1509687369.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:09.323Z,1509687369.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:09.679Z,1509687369.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:09.720Z,1509687369.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:10.065Z,1509687370.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:10.127Z,1509687370.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:10.470Z,1509687370.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:10.503Z,1509687370.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:10.880Z,1509687370.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:10.895Z,1509687370.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:11.271Z,1509687371.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:11.287Z,1509687371.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:11.670Z,1509687371.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:11.709Z,1509687371.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:12.087Z,1509687372.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:12.093Z,1509687372.093 [PNI_TCM](ERROR): CRC does not match. Expected:0x19107 got:0x49443
2017-11-03T05:36:12.123Z,1509687372.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:15.174Z,1509687375.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:15.258Z,1509687375.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:15.405Z,1509687375.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:15.429Z,1509687375.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:15.792Z,1509687375.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:15.811Z,1509687375.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:16.190Z,1509687376.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:16.205Z,1509687376.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:16.588Z,1509687376.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:16.635Z,1509687376.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:16.994Z,1509687376.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:17.008Z,1509687377.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:17.402Z,1509687377.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:17.454Z,1509687377.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:17.802Z,1509687377.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:17.850Z,1509687377.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:18.188Z,1509687378.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:18.203Z,1509687378.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:18.588Z,1509687378.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:18.611Z,1509687378.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:18.988Z,1509687378.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:19.003Z,1509687379.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:19.389Z,1509687379.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:19.403Z,1509687379.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:19.788Z,1509687379.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:19.803Z,1509687379.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:20.201Z,1509687380.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:20.233Z,1509687380.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:20.601Z,1509687380.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:20.632Z,1509687380.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:21.001Z,1509687381.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:21.030Z,1509687381.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:21.388Z,1509687381.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:21.403Z,1509687381.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:21.788Z,1509687381.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:21.803Z,1509687381.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:22.188Z,1509687382.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:22.203Z,1509687382.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:22.588Z,1509687382.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:22.603Z,1509687382.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:22.989Z,1509687382.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:23.004Z,1509687383.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:23.393Z,1509687383.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:23.408Z,1509687383.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:23.802Z,1509687383.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:23.830Z,1509687383.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:24.188Z,1509687384.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:24.202Z,1509687384.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:24.587Z,1509687384.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:24.603Z,1509687384.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:24.988Z,1509687384.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:25.011Z,1509687385.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:25.389Z,1509687385.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:25.404Z,1509687385.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:25.789Z,1509687385.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:25.804Z,1509687385.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:26.202Z,1509687386.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:26.231Z,1509687386.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:26.601Z,1509687386.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:26.631Z,1509687386.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:27.002Z,1509687387.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:27.030Z,1509687387.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:27.389Z,1509687387.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:27.404Z,1509687387.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:27.788Z,1509687387.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:27.803Z,1509687387.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:28.189Z,1509687388.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:28.204Z,1509687388.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:28.589Z,1509687388.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:28.605Z,1509687388.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:28.993Z,1509687388.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:29.008Z,1509687389.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:29.402Z,1509687389.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:29.431Z,1509687389.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:29.802Z,1509687389.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:29.855Z,1509687389.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:30.188Z,1509687390.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:30.239Z,1509687390.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:30.592Z,1509687390.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:30.608Z,1509687390.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:30.992Z,1509687390.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:31.040Z,1509687391.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:31.393Z,1509687391.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:31.408Z,1509687391.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:31.790Z,1509687391.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:31.839Z,1509687391.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:32.197Z,1509687392.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:32.278Z,1509687392.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:32.606Z,1509687392.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:32.632Z,1509687392.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:32.994Z,1509687392.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:33.010Z,1509687393.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:33.390Z,1509687393.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:33.405Z,1509687393.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:33.790Z,1509687393.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:33.809Z,1509687393.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:34.190Z,1509687394.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:34.205Z,1509687394.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:34.591Z,1509687394.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:34.607Z,1509687394.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:34.997Z,1509687394.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:35.013Z,1509687395.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:35.394Z,1509687395.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:35.409Z,1509687395.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:35.794Z,1509687395.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:35.809Z,1509687395.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:36.191Z,1509687396.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:36.206Z,1509687396.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:36.596Z,1509687396.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:36.634Z,1509687396.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:36.992Z,1509687396.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:37.007Z,1509687397.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:37.391Z,1509687397.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:37.407Z,1509687397.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:37.791Z,1509687397.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:37.811Z,1509687397.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:38.193Z,1509687398.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:38.209Z,1509687398.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:38.597Z,1509687398.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:38.612Z,1509687398.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:38.994Z,1509687398.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:39.009Z,1509687399.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:39.389Z,1509687399.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:39.405Z,1509687399.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:39.790Z,1509687399.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:39.806Z,1509687399.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:40.191Z,1509687400.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:40.211Z,1509687400.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:40.591Z,1509687400.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:40.607Z,1509687400.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:40.997Z,1509687400.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:41.013Z,1509687401.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:41.397Z,1509687401.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:41.413Z,1509687401.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:41.798Z,1509687401.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:41.813Z,1509687401.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:42.192Z,1509687402.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:42.207Z,1509687402.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:42.590Z,1509687402.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:42.605Z,1509687402.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:42.990Z,1509687402.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:43.006Z,1509687403.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:43.392Z,1509687403.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:43.407Z,1509687403.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:43.792Z,1509687403.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:43.807Z,1509687403.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:44.198Z,1509687404.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:44.247Z,1509687404.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:44.601Z,1509687404.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:44.651Z,1509687404.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:44.000Z,1509687405.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:45.015Z,1509687405.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:45.395Z,1509687405.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:45.415Z,1509687405.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:45.794Z,1509687405.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:45.846Z,1509687405.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:46.196Z,1509687406.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:46.211Z,1509687406.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:46.593Z,1509687406.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:46.650Z,1509687406.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:47.001Z,1509687407.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:47.047Z,1509687407.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:47.402Z,1509687407.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:47.417Z,1509687407.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:47.800Z,1509687407.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:47.816Z,1509687407.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:48.195Z,1509687408.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:48.211Z,1509687408.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:48.591Z,1509687408.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:48.606Z,1509687408.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:48.994Z,1509687408.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:49.009Z,1509687409.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:49.397Z,1509687409.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:49.419Z,1509687409.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:49.796Z,1509687409.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:49.811Z,1509687409.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:50.202Z,1509687410.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:50.223Z,1509687410.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:50.602Z,1509687410.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:50.617Z,1509687410.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:51.001Z,1509687411.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:51.015Z,1509687411.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:51.392Z,1509687411.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:51.408Z,1509687411.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:51.795Z,1509687411.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:51.811Z,1509687411.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:52.195Z,1509687412.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:52.211Z,1509687412.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:52.592Z,1509687412.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:52.608Z,1509687412.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:53.001Z,1509687413.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:53.017Z,1509687413.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:53.402Z,1509687413.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:53.417Z,1509687413.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:53.801Z,1509687413.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:53.816Z,1509687413.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:54.195Z,1509687414.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:54.210Z,1509687414.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:54.595Z,1509687414.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:54.610Z,1509687414.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:54.995Z,1509687414.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:55.010Z,1509687415.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:55.396Z,1509687415.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:55.411Z,1509687415.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:55.787Z,1509687415.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:55.807Z,1509687415.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:56.199Z,1509687416.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:56.223Z,1509687416.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:56.601Z,1509687416.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:56.617Z,1509687416.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:56.000Z,1509687417.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:57.015Z,1509687417.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:57.391Z,1509687417.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:57.407Z,1509687417.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:57.795Z,1509687417.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:57.810Z,1509687417.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:58.196Z,1509687418.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:58.211Z,1509687418.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:58.592Z,1509687418.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:58.607Z,1509687418.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:58.000Z,1509687419.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:59.062Z,1509687419.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:59.400Z,1509687419.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:59.458Z,1509687419.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:36:59.804Z,1509687419.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:36:59.827Z,1509687419.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:00.194Z,1509687420.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:00.209Z,1509687420.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:00.594Z,1509687420.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:00.651Z,1509687420.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:00.991Z,1509687420.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:01.007Z,1509687421.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:01.395Z,1509687421.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:01.443Z,1509687421.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:01.789Z,1509687421.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:01.842Z,1509687421.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:02.204Z,1509687422.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:02.219Z,1509687422.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:02.604Z,1509687422.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:02.618Z,1509687422.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:03.000Z,1509687423.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:03.015Z,1509687423.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:03.394Z,1509687423.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:03.409Z,1509687423.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:03.798Z,1509687423.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:03.814Z,1509687423.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:04.189Z,1509687424.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:04.208Z,1509687424.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:04.592Z,1509687424.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:04.607Z,1509687424.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:05.005Z,1509687425.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:05.019Z,1509687425.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:05.404Z,1509687425.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:05.426Z,1509687425.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:05.804Z,1509687425.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:05.819Z,1509687425.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:06.194Z,1509687426.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:06.209Z,1509687426.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:06.592Z,1509687426.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:06.607Z,1509687426.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:06.995Z,1509687426.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:07.015Z,1509687427.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:07.392Z,1509687427.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:07.407Z,1509687427.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:07.796Z,1509687427.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:07.811Z,1509687427.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:08.204Z,1509687428.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:08.219Z,1509687428.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:08.604Z,1509687428.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:08.619Z,1509687428.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:09.004Z,1509687429.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:09.019Z,1509687429.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:09.393Z,1509687429.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:09.408Z,1509687429.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:09.799Z,1509687429.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:09.816Z,1509687429.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:10.192Z,1509687430.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:10.208Z,1509687430.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:10.591Z,1509687430.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:10.608Z,1509687430.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:11.005Z,1509687431.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:11.020Z,1509687431.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:11.404Z,1509687431.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:11.420Z,1509687431.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:11.804Z,1509687431.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:11.827Z,1509687431.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:12.195Z,1509687432.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:12.210Z,1509687432.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:15.288Z,1509687435.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:15.370Z,1509687435.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:15.504Z,1509687435.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:15.543Z,1509687435.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:15.909Z,1509687435.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:15.923Z,1509687435.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:16.308Z,1509687436.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:16.323Z,1509687436.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:16.708Z,1509687436.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:16.755Z,1509687436.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:17.099Z,1509687437.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:17.114Z,1509687437.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:17.499Z,1509687437.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:17.558Z,1509687437.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:17.901Z,1509687437.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:17.955Z,1509687437.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:18.301Z,1509687438.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:18.315Z,1509687438.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:18.700Z,1509687438.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:18.715Z,1509687438.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:19.108Z,1509687439.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:19.124Z,1509687439.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:19.509Z,1509687439.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:19.530Z,1509687439.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:19.908Z,1509687439.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:19.923Z,1509687439.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:20.299Z,1509687440.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:20.315Z,1509687440.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:20.699Z,1509687440.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:20.714Z,1509687440.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:21.101Z,1509687441.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:21.116Z,1509687441.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:21.499Z,1509687441.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:21.515Z,1509687441.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:21.908Z,1509687441.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:21.924Z,1509687441.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:22.307Z,1509687442.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:22.327Z,1509687442.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:22.707Z,1509687442.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:22.727Z,1509687442.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:23.102Z,1509687443.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:23.117Z,1509687443.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:23.500Z,1509687443.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:23.515Z,1509687443.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:23.899Z,1509687443.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:23.915Z,1509687443.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:24.297Z,1509687444.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:24.311Z,1509687444.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:24.702Z,1509687444.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:24.723Z,1509687444.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:25.107Z,1509687445.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:25.127Z,1509687445.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:25.509Z,1509687445.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:25.530Z,1509687445.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:25.907Z,1509687445.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:25.923Z,1509687445.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:26.300Z,1509687446.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:26.315Z,1509687446.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:26.703Z,1509687446.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:26.718Z,1509687446.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:27.102Z,1509687447.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:27.117Z,1509687447.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:27.502Z,1509687447.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:27.523Z,1509687447.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:27.908Z,1509687447.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:27.923Z,1509687447.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:28.307Z,1509687448.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:28.323Z,1509687448.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:28.707Z,1509687448.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:28.727Z,1509687448.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:29.096Z,1509687449.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:29.111Z,1509687449.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:29.500Z,1509687449.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:29.515Z,1509687449.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:29.900Z,1509687449.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:29.986Z,1509687449.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:30.304Z,1509687450.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:30.318Z,1509687450.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:30.700Z,1509687450.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:30.758Z,1509687450.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:31.107Z,1509687451.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:31.127Z,1509687451.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:31.508Z,1509687451.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:31.551Z,1509687451.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:31.907Z,1509687451.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:31.959Z,1509687451.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:32.299Z,1509687452.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:32.314Z,1509687452.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:32.703Z,1509687452.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:32.722Z,1509687452.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:33.103Z,1509687453.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:33.118Z,1509687453.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:33.499Z,1509687453.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:33.515Z,1509687453.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:33.908Z,1509687453.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:33.923Z,1509687453.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:34.307Z,1509687454.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:34.327Z,1509687454.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:34.708Z,1509687454.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:34.723Z,1509687454.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:35.096Z,1509687455.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:35.114Z,1509687455.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:35.500Z,1509687455.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:35.515Z,1509687455.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:35.900Z,1509687455.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:35.915Z,1509687455.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:36.301Z,1509687456.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:36.316Z,1509687456.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:36.700Z,1509687456.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:36.716Z,1509687456.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:37.108Z,1509687457.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:37.131Z,1509687457.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:37.509Z,1509687457.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:37.523Z,1509687457.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:37.908Z,1509687457.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:37.923Z,1509687457.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:38.301Z,1509687458.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:38.316Z,1509687458.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:38.702Z,1509687458.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:38.717Z,1509687458.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:39.105Z,1509687459.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:39.121Z,1509687459.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:39.501Z,1509687459.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:39.517Z,1509687459.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:39.909Z,1509687459.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:39.924Z,1509687459.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:40.310Z,1509687460.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:40.331Z,1509687460.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:40.707Z,1509687460.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:40.723Z,1509687460.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:41.101Z,1509687461.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:41.117Z,1509687461.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:41.501Z,1509687461.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:41.517Z,1509687461.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:41.902Z,1509687461.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:41.923Z,1509687461.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:42.300Z,1509687462.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:42.315Z,1509687462.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:42.703Z,1509687462.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:42.719Z,1509687462.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:43.108Z,1509687463.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:43.123Z,1509687463.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:43.508Z,1509687463.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:43.523Z,1509687463.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:43.908Z,1509687463.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:43.974Z,1509687463.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:44.302Z,1509687464.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:44.323Z,1509687464.323 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:44.323Z,1509687464.323 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 108
2017-11-03T05:37:44.323Z,1509687464.323 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:37:44.325Z,1509687464.325 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:44.325Z,1509687464.325 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 108
2017-11-03T05:37:44.325Z,1509687464.325 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:37:44.327Z,1509687464.327 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:44.327Z,1509687464.327 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108
2017-11-03T05:37:44.327Z,1509687464.327 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:37:44.413Z,1509687464.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:37:44.413Z,1509687464.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:37:44.413Z,1509687464.413 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:37:44.687Z,1509687464.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:44.801Z,1509687464.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:37:44.801Z,1509687464.801 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 108
2017-11-03T05:37:44.801Z,1509687464.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:37:44.802Z,1509687464.802 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 108
2017-11-03T05:37:44.802Z,1509687464.802 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:37:44.802Z,1509687464.802 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108
2017-11-03T05:37:45.088Z,1509687465.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:45.117Z,1509687465.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:37:45.118Z,1509687465.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:37:45.118Z,1509687465.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:37:45.118Z,1509687465.118 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:37:45.119Z,1509687465.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:37:45.119Z,1509687465.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:37:45.119Z,1509687465.119 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:37:45.120Z,1509687465.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:37:45.120Z,1509687465.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:37:45.491Z,1509687465.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:45.522Z,1509687465.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:37:45.523Z,1509687465.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:45.914Z,1509687465.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:45.928Z,1509687465.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:37:45.929Z,1509687465.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:46.311Z,1509687466.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:46.326Z,1509687466.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:37:46.327Z,1509687466.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:46.713Z,1509687466.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:46.728Z,1509687466.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:37:46.729Z,1509687466.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:47.095Z,1509687467.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:47.103Z,1509687467.103 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:37:47.103Z,1509687467.103 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:37:47.103Z,1509687467.103 [BPC1](ERROR): Communications Fault
2017-11-03T05:37:47.136Z,1509687467.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:37:47.137Z,1509687467.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:47.229Z,1509687467.229 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:37:47.489Z,1509687467.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:47.504Z,1509687467.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:37:47.521Z,1509687467.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:47.895Z,1509687467.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:47.929Z,1509687467.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:37:47.930Z,1509687467.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:48.293Z,1509687468.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:48.307Z,1509687468.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:37:48.308Z,1509687468.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:48.417Z,1509687468.417 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:37:48.417Z,1509687468.417 [BPC1] No Fault, FailCount= 1
2017-11-03T05:37:48.695Z,1509687468.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:48.774Z,1509687468.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T05:37:48.775Z,1509687468.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:49.106Z,1509687469.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:49.142Z,1509687469.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:37:49.143Z,1509687469.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:49.501Z,1509687469.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:49.528Z,1509687469.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:37:49.529Z,1509687469.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:49.906Z,1509687469.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:49.938Z,1509687469.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:37:49.939Z,1509687469.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:50.291Z,1509687470.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:50.342Z,1509687470.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:37:50.343Z,1509687470.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:50.692Z,1509687470.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:50.706Z,1509687470.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:37:50.707Z,1509687470.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:51.096Z,1509687471.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:51.126Z,1509687471.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:37:51.127Z,1509687471.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:51.493Z,1509687471.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:51.507Z,1509687471.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:37:51.508Z,1509687471.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:51.905Z,1509687471.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:51.932Z,1509687471.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:37:51.933Z,1509687471.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:52.305Z,1509687472.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:52.331Z,1509687472.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T05:37:52.332Z,1509687472.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:52.705Z,1509687472.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:52.745Z,1509687472.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:37:52.746Z,1509687472.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:53.092Z,1509687473.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:53.106Z,1509687473.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T05:37:53.107Z,1509687473.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:53.489Z,1509687473.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:53.503Z,1509687473.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:37:53.504Z,1509687473.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:53.893Z,1509687473.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:53.907Z,1509687473.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T05:37:53.908Z,1509687473.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:54.289Z,1509687474.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:54.303Z,1509687474.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:37:54.304Z,1509687474.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:54.693Z,1509687474.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:54.707Z,1509687474.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T05:37:54.708Z,1509687474.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:55.101Z,1509687475.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:55.132Z,1509687475.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T05:37:55.133Z,1509687475.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:55.505Z,1509687475.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:55.532Z,1509687475.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:37:55.533Z,1509687475.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:55.905Z,1509687475.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:55.930Z,1509687475.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:37:55.931Z,1509687475.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:56.293Z,1509687476.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:56.308Z,1509687476.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:37:56.309Z,1509687476.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:56.692Z,1509687476.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:56.706Z,1509687476.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T05:37:56.707Z,1509687476.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:57.093Z,1509687477.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:57.107Z,1509687477.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T05:37:57.109Z,1509687477.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:57.492Z,1509687477.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:57.507Z,1509687477.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T05:37:57.509Z,1509687477.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:57.906Z,1509687477.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:57.936Z,1509687477.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T05:37:57.937Z,1509687477.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:58.306Z,1509687478.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:58.329Z,1509687478.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T05:37:58.330Z,1509687478.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:58.706Z,1509687478.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:58.730Z,1509687478.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T05:37:58.731Z,1509687478.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:59.091Z,1509687479.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:59.106Z,1509687479.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T05:37:59.107Z,1509687479.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:59.492Z,1509687479.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:59.506Z,1509687479.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T05:37:59.507Z,1509687479.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:37:59.895Z,1509687479.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:37:59.934Z,1509687479.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T05:37:59.935Z,1509687479.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:00.292Z,1509687480.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:00.306Z,1509687480.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:38:00.307Z,1509687480.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:00.692Z,1509687480.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:00.707Z,1509687480.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:38:00.708Z,1509687480.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:01.105Z,1509687481.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:01.154Z,1509687481.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T05:38:01.155Z,1509687481.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:01.505Z,1509687481.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:01.530Z,1509687481.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:38:01.530Z,1509687481.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:01.905Z,1509687481.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:01.929Z,1509687481.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T05:38:01.930Z,1509687481.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:02.292Z,1509687482.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:02.307Z,1509687482.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:38:02.308Z,1509687482.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:02.691Z,1509687482.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:02.742Z,1509687482.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T05:38:02.743Z,1509687482.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:03.092Z,1509687483.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:03.107Z,1509687483.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T05:38:03.108Z,1509687483.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:03.491Z,1509687483.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:03.542Z,1509687483.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T05:38:03.543Z,1509687483.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:03.905Z,1509687483.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:03.951Z,1509687483.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T05:38:03.952Z,1509687483.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:04.301Z,1509687484.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:04.333Z,1509687484.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:04.705Z,1509687484.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:04.729Z,1509687484.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:05.091Z,1509687485.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:05.106Z,1509687485.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:05.491Z,1509687485.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:05.506Z,1509687485.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:05.898Z,1509687485.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:05.931Z,1509687485.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:06.292Z,1509687486.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:06.307Z,1509687486.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:06.691Z,1509687486.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:06.711Z,1509687486.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:07.105Z,1509687487.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:07.129Z,1509687487.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:07.509Z,1509687487.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:07.532Z,1509687487.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:07.905Z,1509687487.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:07.929Z,1509687487.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:08.292Z,1509687488.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:08.307Z,1509687488.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:08.691Z,1509687488.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:08.706Z,1509687488.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:09.093Z,1509687489.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:09.108Z,1509687489.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:09.498Z,1509687489.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:09.533Z,1509687489.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:09.905Z,1509687489.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:09.930Z,1509687489.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:10.305Z,1509687490.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:10.329Z,1509687490.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:10.709Z,1509687490.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:10.733Z,1509687490.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:11.091Z,1509687491.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:11.105Z,1509687491.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:11.492Z,1509687491.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:11.507Z,1509687491.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:11.894Z,1509687491.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:11.909Z,1509687491.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:12.300Z,1509687492.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:12.333Z,1509687492.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:15.399Z,1509687495.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:15.459Z,1509687495.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:15.605Z,1509687495.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:15.639Z,1509687495.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:16.005Z,1509687496.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:16.059Z,1509687496.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:16.405Z,1509687496.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:16.436Z,1509687496.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:16.796Z,1509687496.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:16.811Z,1509687496.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:17.199Z,1509687497.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:17.247Z,1509687497.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:17.591Z,1509687497.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:17.611Z,1509687497.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:18.009Z,1509687498.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:18.063Z,1509687498.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:18.405Z,1509687498.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:18.447Z,1509687498.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:18.806Z,1509687498.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:18.836Z,1509687498.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:19.196Z,1509687499.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:19.211Z,1509687499.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:19.591Z,1509687499.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:19.606Z,1509687499.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:19.999Z,1509687499.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:20.037Z,1509687500.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:20.396Z,1509687500.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:20.411Z,1509687500.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:20.799Z,1509687500.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:20.813Z,1509687500.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:21.205Z,1509687501.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:21.236Z,1509687501.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:21.605Z,1509687501.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:21.620Z,1509687501.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:22.005Z,1509687502.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:22.020Z,1509687502.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:22.387Z,1509687502.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:22.421Z,1509687502.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:22.795Z,1509687502.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:22.820Z,1509687502.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:23.195Z,1509687503.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:23.221Z,1509687503.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:23.589Z,1509687503.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:23.623Z,1509687503.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:24.014Z,1509687504.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:24.029Z,1509687504.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:24.401Z,1509687504.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:24.427Z,1509687504.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:24.814Z,1509687504.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:24.830Z,1509687504.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:25.193Z,1509687505.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:25.245Z,1509687505.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:25.589Z,1509687505.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:25.604Z,1509687505.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:25.996Z,1509687505.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:26.027Z,1509687506.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:26.394Z,1509687506.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:26.409Z,1509687506.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:26.793Z,1509687506.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:26.808Z,1509687506.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:27.207Z,1509687507.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:27.237Z,1509687507.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:27.610Z,1509687507.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:27.634Z,1509687507.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:28.006Z,1509687508.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:28.036Z,1509687508.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:28.392Z,1509687508.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:28.407Z,1509687508.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:28.799Z,1509687508.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:28.837Z,1509687508.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:29.199Z,1509687509.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:29.251Z,1509687509.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:29.592Z,1509687509.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:29.607Z,1509687509.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:30.005Z,1509687510.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:30.038Z,1509687510.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:30.405Z,1509687510.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:30.437Z,1509687510.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:30.805Z,1509687510.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:30.860Z,1509687510.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:31.192Z,1509687511.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:31.207Z,1509687511.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:31.599Z,1509687511.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:31.647Z,1509687511.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:31.993Z,1509687511.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:32.007Z,1509687512.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:32.396Z,1509687512.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:32.443Z,1509687512.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:32.791Z,1509687512.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:32.836Z,1509687512.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:33.206Z,1509687513.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:33.236Z,1509687513.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:33.606Z,1509687513.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:33.636Z,1509687513.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:34.006Z,1509687514.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:34.036Z,1509687514.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:34.391Z,1509687514.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:34.406Z,1509687514.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:34.798Z,1509687514.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:34.835Z,1509687514.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:35.192Z,1509687515.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:35.206Z,1509687515.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:35.590Z,1509687515.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:35.605Z,1509687515.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:36.005Z,1509687516.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:36.041Z,1509687516.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:36.409Z,1509687516.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:36.423Z,1509687516.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:36.809Z,1509687516.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:36.841Z,1509687516.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:37.200Z,1509687517.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:37.215Z,1509687517.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:37.596Z,1509687517.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:37.611Z,1509687517.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:37.996Z,1509687517.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:38.011Z,1509687518.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:38.400Z,1509687518.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:38.415Z,1509687518.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:38.799Z,1509687518.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:38.814Z,1509687518.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:39.213Z,1509687519.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:39.245Z,1509687519.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:39.609Z,1509687519.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:39.625Z,1509687519.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:40.005Z,1509687520.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:40.026Z,1509687520.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:40.402Z,1509687520.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:40.417Z,1509687520.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:40.802Z,1509687520.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:40.818Z,1509687520.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:41.203Z,1509687521.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:41.218Z,1509687521.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:41.602Z,1509687521.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:41.617Z,1509687521.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:42.006Z,1509687522.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:42.021Z,1509687522.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:42.405Z,1509687522.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:42.426Z,1509687522.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:42.806Z,1509687522.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:42.821Z,1509687522.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:43.201Z,1509687523.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:43.216Z,1509687523.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:43.601Z,1509687523.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:43.660Z,1509687523.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:44.002Z,1509687524.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:44.018Z,1509687524.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:44.401Z,1509687524.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:44.416Z,1509687524.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:44.803Z,1509687524.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:44.857Z,1509687524.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:45.208Z,1509687525.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:45.223Z,1509687525.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:45.610Z,1509687525.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:45.631Z,1509687525.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:46.009Z,1509687526.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:46.062Z,1509687526.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:46.403Z,1509687526.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:46.418Z,1509687526.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:46.802Z,1509687526.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:46.862Z,1509687526.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:47.201Z,1509687527.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:47.216Z,1509687527.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:47.602Z,1509687527.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:47.665Z,1509687527.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:48.007Z,1509687528.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:48.023Z,1509687528.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:48.409Z,1509687528.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:48.425Z,1509687528.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:48.808Z,1509687528.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:48.823Z,1509687528.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:49.199Z,1509687529.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:49.215Z,1509687529.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:49.603Z,1509687529.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:49.618Z,1509687529.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:49.987Z,1509687529.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:50.012Z,1509687530.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:50.401Z,1509687530.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:50.416Z,1509687530.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:50.803Z,1509687530.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:50.818Z,1509687530.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:51.209Z,1509687531.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:51.224Z,1509687531.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:51.612Z,1509687531.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:51.627Z,1509687531.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:52.013Z,1509687532.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:52.028Z,1509687532.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:52.384Z,1509687532.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:52.417Z,1509687532.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:52.801Z,1509687532.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:52.816Z,1509687532.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:53.204Z,1509687533.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:53.226Z,1509687533.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:53.589Z,1509687533.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:53.618Z,1509687533.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:54.012Z,1509687534.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:54.028Z,1509687534.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:54.413Z,1509687534.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:54.428Z,1509687534.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:54.814Z,1509687534.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:54.830Z,1509687534.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:55.201Z,1509687535.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:55.218Z,1509687535.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:55.603Z,1509687535.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:55.618Z,1509687535.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:55.991Z,1509687535.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:56.022Z,1509687536.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:56.401Z,1509687536.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:56.417Z,1509687536.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:56.803Z,1509687536.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:56.818Z,1509687536.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:57.212Z,1509687537.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:57.227Z,1509687537.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:57.612Z,1509687537.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:57.627Z,1509687537.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:58.013Z,1509687538.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:58.035Z,1509687538.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:58.402Z,1509687538.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:58.459Z,1509687538.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:58.801Z,1509687538.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:58.816Z,1509687538.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:59.204Z,1509687539.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:59.219Z,1509687539.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:38:59.589Z,1509687539.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:38:59.639Z,1509687539.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:00.012Z,1509687540.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:00.027Z,1509687540.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:00.417Z,1509687540.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:00.432Z,1509687540.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:00.811Z,1509687540.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:00.862Z,1509687540.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:01.193Z,1509687541.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:01.222Z,1509687541.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:01.595Z,1509687541.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:01.660Z,1509687541.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:01.995Z,1509687541.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:02.021Z,1509687542.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:02.393Z,1509687542.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:02.463Z,1509687542.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:02.792Z,1509687542.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:02.819Z,1509687542.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:03.213Z,1509687543.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:03.235Z,1509687543.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:03.614Z,1509687543.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:03.629Z,1509687543.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:04.014Z,1509687544.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:04.029Z,1509687544.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:04.391Z,1509687544.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:04.416Z,1509687544.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:04.792Z,1509687544.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:04.818Z,1509687544.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:05.190Z,1509687545.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:05.221Z,1509687545.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:05.589Z,1509687545.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:05.621Z,1509687545.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:06.014Z,1509687546.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:06.032Z,1509687546.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:06.402Z,1509687546.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:06.429Z,1509687546.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:06.814Z,1509687546.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:06.829Z,1509687546.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:07.193Z,1509687547.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:07.229Z,1509687547.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:07.591Z,1509687547.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:07.607Z,1509687547.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:07.993Z,1509687547.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:08.025Z,1509687548.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:08.396Z,1509687548.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:08.427Z,1509687548.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:08.792Z,1509687548.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:08.807Z,1509687548.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:09.205Z,1509687549.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:09.232Z,1509687549.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:09.605Z,1509687549.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:09.633Z,1509687549.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:10.009Z,1509687550.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:10.036Z,1509687550.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:10.395Z,1509687550.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:10.410Z,1509687550.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:10.795Z,1509687550.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:10.811Z,1509687550.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:11.200Z,1509687551.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:11.236Z,1509687551.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:11.592Z,1509687551.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:11.608Z,1509687551.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:12.010Z,1509687552.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:12.033Z,1509687552.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:12.406Z,1509687552.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:12.437Z,1509687552.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:15.498Z,1509687555.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:15.574Z,1509687555.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:15.716Z,1509687555.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:15.748Z,1509687555.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:16.114Z,1509687556.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:16.180Z,1509687556.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:16.519Z,1509687556.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:16.545Z,1509687556.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:16.934Z,1509687556.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:16.986Z,1509687556.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:17.077Z,1509687557.077 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:39:17.077Z,1509687557.077 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T05:39:17.308Z,1509687557.308 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:39:17.309Z,1509687557.309 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:39:17.309Z,1509687557.309 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:39:17.309Z,1509687557.309 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:39:17.348Z,1509687557.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:17.403Z,1509687557.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:17.735Z,1509687557.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:17.750Z,1509687557.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:18.113Z,1509687558.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:18.147Z,1509687558.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:18.511Z,1509687558.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:18.547Z,1509687558.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:18.911Z,1509687558.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:18.947Z,1509687558.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:19.313Z,1509687559.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:19.352Z,1509687559.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:19.711Z,1509687559.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:19.743Z,1509687559.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:20.127Z,1509687560.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:20.159Z,1509687560.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:20.526Z,1509687560.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:20.559Z,1509687560.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:20.921Z,1509687560.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:20.951Z,1509687560.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:21.312Z,1509687561.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:21.327Z,1509687561.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:21.483Z,1509687561.483 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:39:21.551Z,1509687561.551 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:39:21.552Z,1509687561.552 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:39:21.553Z,1509687561.553 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:39:21.553Z,1509687561.553 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:39:21.721Z,1509687561.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:21.739Z,1509687561.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:22.117Z,1509687562.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:22.132Z,1509687562.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:22.521Z,1509687562.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:22.590Z,1509687562.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:22.929Z,1509687562.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:22.945Z,1509687562.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:23.330Z,1509687563.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:23.345Z,1509687563.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:23.729Z,1509687563.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:23.744Z,1509687563.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:24.123Z,1509687564.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:24.139Z,1509687564.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:24.525Z,1509687564.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:24.540Z,1509687564.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:24.923Z,1509687564.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:24.939Z,1509687564.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:25.322Z,1509687565.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:25.338Z,1509687565.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:25.723Z,1509687565.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:25.739Z,1509687565.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:26.133Z,1509687566.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:26.155Z,1509687566.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:26.533Z,1509687566.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:26.549Z,1509687566.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:26.934Z,1509687566.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:26.949Z,1509687566.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:27.323Z,1509687567.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:27.339Z,1509687567.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:27.722Z,1509687567.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:27.738Z,1509687567.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:28.145Z,1509687568.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:28.173Z,1509687568.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:28.539Z,1509687568.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:28.591Z,1509687568.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:28.933Z,1509687568.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:28.955Z,1509687568.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:29.337Z,1509687569.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:29.351Z,1509687569.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:29.733Z,1509687569.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:29.793Z,1509687569.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:30.122Z,1509687570.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:30.137Z,1509687570.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:30.523Z,1509687570.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:30.563Z,1509687570.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:30.938Z,1509687570.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:30.987Z,1509687570.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:31.322Z,1509687571.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:31.342Z,1509687571.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:31.725Z,1509687571.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:31.740Z,1509687571.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:32.134Z,1509687572.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:32.149Z,1509687572.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:32.534Z,1509687572.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:32.549Z,1509687572.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:32.944Z,1509687572.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:32.958Z,1509687572.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:33.310Z,1509687573.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:33.337Z,1509687573.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:33.712Z,1509687573.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:33.738Z,1509687573.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:34.124Z,1509687574.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:34.139Z,1509687574.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:34.522Z,1509687574.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:34.537Z,1509687574.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:34.940Z,1509687574.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:34.969Z,1509687574.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:35.338Z,1509687575.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:35.352Z,1509687575.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:35.731Z,1509687575.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:35.746Z,1509687575.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:36.111Z,1509687576.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:36.145Z,1509687576.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:36.514Z,1509687576.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:36.542Z,1509687576.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:36.942Z,1509687576.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:36.961Z,1509687576.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:37.313Z,1509687577.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:37.341Z,1509687577.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:37.715Z,1509687577.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:37.742Z,1509687577.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:38.136Z,1509687578.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:38.152Z,1509687578.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:38.537Z,1509687578.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:38.553Z,1509687578.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:38.985Z,1509687578.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:39.006Z,1509687579.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:39.313Z,1509687579.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:39.339Z,1509687579.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:39.713Z,1509687579.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:39.740Z,1509687579.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:40.115Z,1509687580.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:40.142Z,1509687580.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:40.513Z,1509687580.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:40.539Z,1509687580.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:40.934Z,1509687580.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:40.949Z,1509687580.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:41.330Z,1509687581.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:41.371Z,1509687581.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:41.734Z,1509687581.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:41.775Z,1509687581.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:42.115Z,1509687582.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:42.147Z,1509687582.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:42.512Z,1509687582.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:42.528Z,1509687582.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:42.908Z,1509687582.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:42.962Z,1509687582.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:43.313Z,1509687583.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:43.351Z,1509687583.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:43.707Z,1509687583.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:43.759Z,1509687583.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:44.132Z,1509687584.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:44.147Z,1509687584.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:44.532Z,1509687584.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:44.583Z,1509687584.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:44.932Z,1509687584.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:44.947Z,1509687584.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:45.321Z,1509687585.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:45.336Z,1509687585.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:45.711Z,1509687585.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:45.731Z,1509687585.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:46.113Z,1509687586.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:46.155Z,1509687586.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:46.513Z,1509687586.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:46.528Z,1509687586.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:46.949Z,1509687586.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:46.964Z,1509687586.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:47.330Z,1509687587.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:47.357Z,1509687587.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:47.726Z,1509687587.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:47.751Z,1509687587.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:48.119Z,1509687588.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:48.155Z,1509687588.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:48.519Z,1509687588.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:48.534Z,1509687588.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:48.943Z,1509687588.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:48.958Z,1509687588.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:49.317Z,1509687589.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:49.332Z,1509687589.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:49.719Z,1509687589.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:49.755Z,1509687589.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:50.130Z,1509687590.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:50.160Z,1509687590.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:50.530Z,1509687590.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:50.561Z,1509687590.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:50.965Z,1509687590.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:50.981Z,1509687590.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:51.311Z,1509687591.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:51.328Z,1509687591.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:51.716Z,1509687591.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:51.732Z,1509687591.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:52.117Z,1509687592.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:52.132Z,1509687592.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:52.516Z,1509687592.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:52.532Z,1509687592.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:52.970Z,1509687592.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:53.007Z,1509687593.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:53.330Z,1509687593.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:53.361Z,1509687593.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:53.730Z,1509687593.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:53.760Z,1509687593.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:54.117Z,1509687594.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:54.132Z,1509687594.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:54.517Z,1509687594.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:54.526Z,1509687594.526 [BPC1](ERROR): Failed to parse message.
2017-11-03T05:39:54.526Z,1509687594.526 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T05:39:54.526Z,1509687594.526 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:39:54.526Z,1509687594.526 [BPC1](ERROR): Data Fault
2017-11-03T05:39:54.534Z,1509687594.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:54.637Z,1509687594.637 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:39:54.921Z,1509687594.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:54.936Z,1509687594.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:55.320Z,1509687595.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:55.335Z,1509687595.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:55.717Z,1509687595.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:55.732Z,1509687595.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:55.817Z,1509687595.817 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:39:55.817Z,1509687595.817 [BPC1] No Fault, FailCount= 1
2017-11-03T05:39:56.122Z,1509687596.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:56.200Z,1509687596.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:56.530Z,1509687596.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:56.565Z,1509687596.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:56.934Z,1509687596.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:56.975Z,1509687596.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:57.321Z,1509687597.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:57.336Z,1509687597.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:57.719Z,1509687597.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:57.734Z,1509687597.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:58.122Z,1509687598.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:58.137Z,1509687598.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:58.523Z,1509687598.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:58.547Z,1509687598.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:58.926Z,1509687598.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:58.947Z,1509687598.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:59.326Z,1509687599.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:59.341Z,1509687599.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:39:59.726Z,1509687599.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:39:59.757Z,1509687599.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:00.115Z,1509687600.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:00.142Z,1509687600.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:00.513Z,1509687600.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:00.547Z,1509687600.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:00.915Z,1509687600.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:00.947Z,1509687600.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:01.314Z,1509687601.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:01.341Z,1509687601.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:01.715Z,1509687601.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:01.743Z,1509687601.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:02.136Z,1509687602.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:02.151Z,1509687602.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:02.537Z,1509687602.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:02.553Z,1509687602.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:02.947Z,1509687602.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:02.963Z,1509687602.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:03.316Z,1509687603.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:03.343Z,1509687603.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:03.709Z,1509687603.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:03.737Z,1509687603.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:04.112Z,1509687604.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:04.149Z,1509687604.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:04.513Z,1509687604.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:04.539Z,1509687604.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:04.932Z,1509687604.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:04.964Z,1509687604.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:05.327Z,1509687605.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:05.359Z,1509687605.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:05.726Z,1509687605.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:05.757Z,1509687605.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:06.116Z,1509687606.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:06.132Z,1509687606.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:06.511Z,1509687606.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:06.527Z,1509687606.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:06.960Z,1509687606.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:07.012Z,1509687607.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:07.317Z,1509687607.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:07.333Z,1509687607.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:07.719Z,1509687607.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:07.767Z,1509687607.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:08.130Z,1509687608.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:08.158Z,1509687608.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:08.530Z,1509687608.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:08.561Z,1509687608.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:08.930Z,1509687608.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:08.960Z,1509687608.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:09.320Z,1509687609.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:09.335Z,1509687609.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:09.716Z,1509687609.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:09.731Z,1509687609.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:10.118Z,1509687610.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:10.143Z,1509687610.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:10.521Z,1509687610.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:10.536Z,1509687610.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:10.932Z,1509687610.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:10.947Z,1509687610.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:11.333Z,1509687611.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:11.406Z,1509687611.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:11.734Z,1509687611.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:11.749Z,1509687611.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:12.123Z,1509687612.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:12.132Z,1509687612.132 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:40:12.132Z,1509687612.132 [BPC1] Communications Fault, FailCount= 2
2017-11-03T05:40:12.132Z,1509687612.132 [BPC1](ERROR): Communications Fault
2017-11-03T05:40:12.140Z,1509687612.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:12.143Z,1509687612.143 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T05:35:12.1Z
2017-11-03T05:40:12.144Z,1509687612.144 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T05:40:12.144Z,1509687612.144 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T05:40:12.225Z,1509687612.225 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:40:12.529Z,1509687612.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:12.544Z,1509687612.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:15.909Z,1509687615.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:15.932Z,1509687615.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:16.041Z,1509687616.041 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0128.lzma
2017-11-03T05:40:16.064Z,1509687616.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:16.098Z,1509687616.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:16.177Z,1509687616.177 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:40:16.177Z,1509687616.177 [BPC1] No Fault, FailCount= 2
2017-11-03T05:40:16.486Z,1509687616.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:16.563Z,1509687616.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:16.854Z,1509687616.854 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0128.lzma.bak
2017-11-03T05:40:16.854Z,1509687616.854 [DataOverHttps](INFO): SBD MOMSN=5182830
2017-11-03T05:40:16.935Z,1509687616.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:16.994Z,1509687616.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:17.502Z,1509687617.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:17.534Z,1509687617.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:17.687Z,1509687617.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:17.703Z,1509687617.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:20.920Z,1509687620.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:20.960Z,1509687620.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:21.113Z,1509687621.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:21.140Z,1509687621.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:21.528Z,1509687621.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:21.543Z,1509687621.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:21.932Z,1509687621.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:21.954Z,1509687621.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:22.318Z,1509687622.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:22.347Z,1509687622.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:22.708Z,1509687622.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:22.738Z,1509687622.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:25.979Z,1509687625.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:25.000Z,1509687626.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:26.117Z,1509687626.117 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171103T001125/Express0129.lzma
2017-11-03T05:40:26.157Z,1509687626.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:26.181Z,1509687626.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:26.544Z,1509687626.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:26.559Z,1509687626.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:26.907Z,1509687626.907 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0129.lzma.bak
2017-11-03T05:40:26.907Z,1509687626.907 [DataOverHttps](INFO): SBD MOMSN=5182832
2017-11-03T05:40:26.952Z,1509687626.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:26.967Z,1509687626.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:27.636Z,1509687627.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:27.705Z,1509687627.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:27.708Z,1509687627.708 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T05:40:27.708Z,1509687627.708 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T05:40:27.709Z,1509687627.709 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T05:40:27.820Z,1509687627.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:27.850Z,1509687627.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:31.094Z,1509687631.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:31.151Z,1509687631.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:31.295Z,1509687631.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:31.319Z,1509687631.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:31.696Z,1509687631.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:31.743Z,1509687631.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:32.098Z,1509687632.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:32.113Z,1509687632.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:32.501Z,1509687632.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:32.551Z,1509687632.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:32.909Z,1509687632.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:32.971Z,1509687632.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:33.293Z,1509687633.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:33.308Z,1509687633.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:33.689Z,1509687633.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:33.708Z,1509687633.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:34.101Z,1509687634.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:34.123Z,1509687634.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:34.498Z,1509687634.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:34.512Z,1509687634.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:34.921Z,1509687634.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:34.965Z,1509687634.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:35.288Z,1509687635.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:35.304Z,1509687635.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:35.696Z,1509687635.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:35.711Z,1509687635.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:36.090Z,1509687636.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:36.106Z,1509687636.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:36.490Z,1509687636.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:36.507Z,1509687636.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:36.896Z,1509687636.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:36.912Z,1509687636.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:37.301Z,1509687637.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:37.323Z,1509687637.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:37.702Z,1509687637.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:37.720Z,1509687637.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:38.082Z,1509687638.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:38.109Z,1509687638.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:38.480Z,1509687638.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:38.507Z,1509687638.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:38.893Z,1509687638.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:38.911Z,1509687638.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:39.294Z,1509687639.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:39.310Z,1509687639.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:39.686Z,1509687639.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:39.714Z,1509687639.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:40.093Z,1509687640.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:40.120Z,1509687640.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:40.495Z,1509687640.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:40.522Z,1509687640.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:40.894Z,1509687640.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:40.920Z,1509687640.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:41.285Z,1509687641.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:41.321Z,1509687641.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:41.688Z,1509687641.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:41.703Z,1509687641.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:42.094Z,1509687642.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:42.187Z,1509687642.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:42.490Z,1509687642.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:42.505Z,1509687642.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:42.901Z,1509687642.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:42.944Z,1509687642.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:43.297Z,1509687643.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:43.321Z,1509687643.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:43.702Z,1509687643.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:43.723Z,1509687643.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:44.085Z,1509687644.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:44.131Z,1509687644.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:44.483Z,1509687644.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:44.513Z,1509687644.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:44.911Z,1509687644.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:44.971Z,1509687644.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:45.286Z,1509687645.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:45.318Z,1509687645.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:45.318Z,1509687645.318 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 109
2017-11-03T05:40:45.318Z,1509687645.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:40:45.320Z,1509687645.320 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:45.320Z,1509687645.320 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 109
2017-11-03T05:40:45.320Z,1509687645.320 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:40:45.322Z,1509687645.322 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:45.322Z,1509687645.322 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109
2017-11-03T05:40:45.322Z,1509687645.322 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:40:45.409Z,1509687645.409 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:40:45.409Z,1509687645.409 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:40:45.409Z,1509687645.409 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:40:45.721Z,1509687645.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:45.820Z,1509687645.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:40:45.820Z,1509687645.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 109
2017-11-03T05:40:45.821Z,1509687645.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:40:45.821Z,1509687645.821 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 109
2017-11-03T05:40:45.821Z,1509687645.821 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:40:45.821Z,1509687645.821 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109
2017-11-03T05:40:46.102Z,1509687646.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:46.165Z,1509687646.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:40:46.166Z,1509687646.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:40:46.166Z,1509687646.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:40:46.166Z,1509687646.166 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:40:46.167Z,1509687646.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:40:46.167Z,1509687646.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:40:46.167Z,1509687646.167 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:40:46.168Z,1509687646.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:40:46.168Z,1509687646.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:40:46.489Z,1509687646.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:46.567Z,1509687646.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:46.931Z,1509687646.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:46.987Z,1509687646.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:47.284Z,1509687647.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:47.343Z,1509687647.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:47.683Z,1509687647.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:47.698Z,1509687647.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:48.086Z,1509687648.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:48.118Z,1509687648.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:48.484Z,1509687648.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:48.499Z,1509687648.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:48.920Z,1509687648.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:48.981Z,1509687648.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:49.298Z,1509687649.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:49.322Z,1509687649.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:49.698Z,1509687649.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:49.723Z,1509687649.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:50.085Z,1509687650.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:50.100Z,1509687650.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:50.482Z,1509687650.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:50.498Z,1509687650.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:50.883Z,1509687650.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:50.903Z,1509687650.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:51.289Z,1509687651.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:51.304Z,1509687651.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:51.682Z,1509687651.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:51.697Z,1509687651.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:52.097Z,1509687652.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:52.133Z,1509687652.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:52.469Z,1509687652.469 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T05:40:52.469Z,1509687652.469 [NAL9602] Data Fault, FailCount= 5
2017-11-03T05:40:52.469Z,1509687652.469 [NAL9602](ERROR): Data Fault
2017-11-03T05:40:52.486Z,1509687652.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:52.501Z,1509687652.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:52.577Z,1509687652.577 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T05:40:52.577Z,1509687652.577 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T05:40:52.863Z,1509687652.863 [NAL9602](INFO): Powering down
2017-11-03T05:40:52.892Z,1509687652.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:52.907Z,1509687652.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:52.995Z,1509687652.995 [CBIT](INFO): Critical error at 20171103T054052
2017-11-03T05:40:53.290Z,1509687653.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:53.305Z,1509687653.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:53.693Z,1509687653.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:53.708Z,1509687653.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:54.082Z,1509687654.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:54.107Z,1509687654.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:54.480Z,1509687654.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:54.505Z,1509687654.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:54.892Z,1509687654.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:54.907Z,1509687654.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:55.293Z,1509687655.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:55.308Z,1509687655.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:55.687Z,1509687655.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:55.715Z,1509687655.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:56.076Z,1509687656.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:56.091Z,1509687656.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:56.503Z,1509687656.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:56.523Z,1509687656.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:56.925Z,1509687656.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:56.999Z,1509687656.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:57.289Z,1509687657.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:57.304Z,1509687657.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:57.690Z,1509687657.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:57.751Z,1509687657.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:58.091Z,1509687658.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:58.120Z,1509687658.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:58.517Z,1509687658.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:58.532Z,1509687658.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:58.912Z,1509687658.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:58.969Z,1509687658.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:59.280Z,1509687659.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:59.339Z,1509687659.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:40:59.708Z,1509687659.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:40:59.761Z,1509687659.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:00.081Z,1509687660.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:00.130Z,1509687660.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:00.519Z,1509687660.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:00.534Z,1509687660.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:00.930Z,1509687660.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:01.023Z,1509687661.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:01.282Z,1509687661.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:01.359Z,1509687661.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:01.704Z,1509687661.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:01.720Z,1509687661.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:02.089Z,1509687662.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:02.139Z,1509687662.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:02.484Z,1509687662.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:02.503Z,1509687662.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:02.937Z,1509687662.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:02.983Z,1509687662.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:03.290Z,1509687663.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:03.342Z,1509687663.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:03.695Z,1509687663.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:03.737Z,1509687663.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:04.079Z,1509687664.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:04.118Z,1509687664.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:04.491Z,1509687664.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:04.516Z,1509687664.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:04.890Z,1509687664.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:04.918Z,1509687664.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:05.281Z,1509687665.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:05.321Z,1509687665.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:05.680Z,1509687665.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:05.728Z,1509687665.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:06.084Z,1509687666.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:06.134Z,1509687666.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:06.483Z,1509687666.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:06.527Z,1509687666.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:06.886Z,1509687666.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:06.927Z,1509687666.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:07.288Z,1509687667.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:07.303Z,1509687667.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:07.691Z,1509687667.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:07.720Z,1509687667.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:08.083Z,1509687668.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:08.119Z,1509687668.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:08.481Z,1509687668.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:08.521Z,1509687668.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:08.881Z,1509687668.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:08.925Z,1509687668.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:09.284Z,1509687669.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:09.318Z,1509687669.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:09.684Z,1509687669.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:09.723Z,1509687669.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:10.094Z,1509687670.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:10.134Z,1509687670.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:10.497Z,1509687670.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:10.530Z,1509687670.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:10.897Z,1509687670.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:10.957Z,1509687670.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:11.288Z,1509687671.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:11.323Z,1509687671.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:11.683Z,1509687671.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:11.698Z,1509687671.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:12.087Z,1509687672.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:12.140Z,1509687672.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:12.482Z,1509687672.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:12.499Z,1509687672.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:12.914Z,1509687672.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:12.933Z,1509687672.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:13.282Z,1509687673.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:13.342Z,1509687673.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:13.686Z,1509687673.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:13.702Z,1509687673.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:14.085Z,1509687674.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:14.128Z,1509687674.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:14.489Z,1509687674.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:14.503Z,1509687674.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:14.911Z,1509687674.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:14.989Z,1509687674.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:15.287Z,1509687675.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:15.335Z,1509687675.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:15.685Z,1509687675.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:15.700Z,1509687675.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:16.089Z,1509687676.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:16.109Z,1509687676.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:16.487Z,1509687676.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:16.502Z,1509687676.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:16.899Z,1509687676.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:16.991Z,1509687676.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:17.289Z,1509687677.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:17.305Z,1509687677.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:17.692Z,1509687677.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:17.707Z,1509687677.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:17.768Z,1509687677.768 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:41:17.768Z,1509687677.768 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T05:41:17.768Z,1509687677.768 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:41:17.820Z,1509687677.820 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:41:18.085Z,1509687678.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:18.101Z,1509687678.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:41:18.102Z,1509687678.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:18.173Z,1509687678.173 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:41:18.276Z,1509687678.276 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:41:18.486Z,1509687678.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:18.508Z,1509687678.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:41:18.509Z,1509687678.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:18.888Z,1509687678.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:18.911Z,1509687678.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:41:18.912Z,1509687678.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:19.285Z,1509687679.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:19.300Z,1509687679.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:41:19.301Z,1509687679.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:19.688Z,1509687679.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:19.706Z,1509687679.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:41:19.707Z,1509687679.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:19.817Z,1509687679.817 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:41:19.817Z,1509687679.817 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T05:41:19.892Z,1509687679.892 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:41:19.893Z,1509687679.893 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:41:19.893Z,1509687679.893 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:41:19.893Z,1509687679.893 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:41:20.088Z,1509687680.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:20.102Z,1509687680.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:41:20.103Z,1509687680.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:20.486Z,1509687680.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:20.501Z,1509687680.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:41:20.502Z,1509687680.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:20.888Z,1509687680.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:20.903Z,1509687680.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:41:20.904Z,1509687680.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:21.290Z,1509687681.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:21.330Z,1509687681.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:41:21.331Z,1509687681.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:21.687Z,1509687681.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:21.701Z,1509687681.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:41:21.702Z,1509687681.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:22.090Z,1509687682.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:22.105Z,1509687682.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:41:22.106Z,1509687682.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:22.492Z,1509687682.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:22.506Z,1509687682.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:41:22.507Z,1509687682.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:22.889Z,1509687682.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:22.903Z,1509687682.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:41:22.904Z,1509687682.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:23.288Z,1509687683.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:23.302Z,1509687683.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:41:23.303Z,1509687683.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:23.686Z,1509687683.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:23.702Z,1509687683.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:41:23.703Z,1509687683.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:24.010Z,1509687684.010 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:41:24.105Z,1509687684.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:24.128Z,1509687684.128 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:41:24.129Z,1509687684.129 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:41:24.130Z,1509687684.130 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:41:24.130Z,1509687684.130 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:41:24.144Z,1509687684.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:41:24.149Z,1509687684.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:24.495Z,1509687684.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:24.514Z,1509687684.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:41:24.515Z,1509687684.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:24.934Z,1509687684.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:24.999Z,1509687684.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:25.284Z,1509687685.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:25.316Z,1509687685.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:25.683Z,1509687685.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:25.699Z,1509687685.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:26.083Z,1509687686.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:26.147Z,1509687686.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:26.483Z,1509687686.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:26.500Z,1509687686.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:26.881Z,1509687686.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:26.898Z,1509687686.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:27.288Z,1509687687.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:27.343Z,1509687687.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:27.683Z,1509687687.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:27.698Z,1509687687.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:28.100Z,1509687688.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:28.147Z,1509687688.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:31.332Z,1509687691.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:31.348Z,1509687691.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:31.461Z,1509687691.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:31.523Z,1509687691.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:31.875Z,1509687691.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:31.941Z,1509687691.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:32.266Z,1509687692.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:32.297Z,1509687692.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:32.670Z,1509687692.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:32.696Z,1509687692.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:33.067Z,1509687693.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:33.097Z,1509687693.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:33.470Z,1509687693.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:33.486Z,1509687693.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:33.878Z,1509687693.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:33.910Z,1509687693.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:34.270Z,1509687694.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:34.308Z,1509687694.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:34.670Z,1509687694.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:34.684Z,1509687694.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:35.070Z,1509687695.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:35.086Z,1509687695.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:35.467Z,1509687695.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:35.482Z,1509687695.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:35.870Z,1509687695.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:35.922Z,1509687695.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:36.270Z,1509687696.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:36.285Z,1509687696.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:36.667Z,1509687696.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:36.683Z,1509687696.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:37.063Z,1509687697.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:37.078Z,1509687697.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:37.470Z,1509687697.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:37.485Z,1509687697.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:37.918Z,1509687697.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:37.970Z,1509687697.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:38.267Z,1509687698.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:38.307Z,1509687698.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:38.666Z,1509687698.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:38.699Z,1509687698.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:39.075Z,1509687699.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:39.090Z,1509687699.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:39.473Z,1509687699.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:39.488Z,1509687699.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:39.871Z,1509687699.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:39.887Z,1509687699.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:40.276Z,1509687700.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:40.291Z,1509687700.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:40.673Z,1509687700.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:40.689Z,1509687700.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:41.075Z,1509687701.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:41.091Z,1509687701.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:41.475Z,1509687701.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:41.491Z,1509687701.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:41.875Z,1509687701.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:41.890Z,1509687701.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:42.274Z,1509687702.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:42.299Z,1509687702.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:42.674Z,1509687702.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:42.739Z,1509687702.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:43.074Z,1509687703.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:43.091Z,1509687703.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:43.474Z,1509687703.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:43.492Z,1509687703.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:43.917Z,1509687703.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:43.951Z,1509687703.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:44.270Z,1509687704.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:44.285Z,1509687704.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:44.679Z,1509687704.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:44.735Z,1509687704.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:45.076Z,1509687705.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:45.091Z,1509687705.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:45.476Z,1509687705.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:45.524Z,1509687705.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:45.902Z,1509687705.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:45.975Z,1509687705.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:46.276Z,1509687706.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:46.291Z,1509687706.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:46.675Z,1509687706.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:46.691Z,1509687706.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:46.785Z,1509687706.785 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T05:41:47.076Z,1509687707.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:47.091Z,1509687707.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:47.476Z,1509687707.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:47.491Z,1509687707.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:47.900Z,1509687707.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:47.934Z,1509687707.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:48.275Z,1509687708.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:48.290Z,1509687708.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:48.670Z,1509687708.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:48.685Z,1509687708.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:49.074Z,1509687709.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:49.091Z,1509687709.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:49.476Z,1509687709.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:49.491Z,1509687709.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:49.585Z,1509687709.585 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T05:41:49.585Z,1509687709.585 [DropWeight] No Fault, FailCount= 1
2017-11-03T05:41:49.915Z,1509687709.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:49.981Z,1509687709.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:50.275Z,1509687710.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:50.290Z,1509687710.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:50.677Z,1509687710.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:50.692Z,1509687710.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:51.074Z,1509687711.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:51.128Z,1509687711.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:51.471Z,1509687711.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:51.491Z,1509687711.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:51.867Z,1509687711.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:51.882Z,1509687711.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:52.274Z,1509687712.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:52.289Z,1509687712.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:52.671Z,1509687712.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:52.691Z,1509687712.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:53.067Z,1509687713.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:53.082Z,1509687713.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:53.474Z,1509687713.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:53.491Z,1509687713.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:53.874Z,1509687713.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:53.891Z,1509687713.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:54.268Z,1509687714.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:54.283Z,1509687714.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:54.670Z,1509687714.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:54.685Z,1509687714.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:55.071Z,1509687715.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:55.091Z,1509687715.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:55.471Z,1509687715.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:55.486Z,1509687715.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:55.874Z,1509687715.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:55.889Z,1509687715.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:56.271Z,1509687716.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:56.291Z,1509687716.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:56.677Z,1509687716.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:56.709Z,1509687716.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:57.074Z,1509687717.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:57.089Z,1509687717.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:57.471Z,1509687717.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:57.486Z,1509687717.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:57.914Z,1509687717.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:57.982Z,1509687717.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:58.266Z,1509687718.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:58.282Z,1509687718.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:58.674Z,1509687718.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:58.731Z,1509687718.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:59.074Z,1509687719.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:59.089Z,1509687719.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:59.474Z,1509687719.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:59.511Z,1509687719.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:41:59.899Z,1509687719.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:41:59.964Z,1509687719.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:00.271Z,1509687720.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:00.291Z,1509687720.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:00.674Z,1509687720.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:00.689Z,1509687720.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:01.071Z,1509687721.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:01.091Z,1509687721.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:01.474Z,1509687721.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:01.490Z,1509687721.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:01.911Z,1509687721.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:01.939Z,1509687721.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:02.274Z,1509687722.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:02.291Z,1509687722.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:02.674Z,1509687722.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:02.689Z,1509687722.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:03.074Z,1509687723.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:03.089Z,1509687723.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:03.472Z,1509687723.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:03.491Z,1509687723.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:03.874Z,1509687723.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:03.962Z,1509687723.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:04.272Z,1509687724.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:04.287Z,1509687724.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:04.672Z,1509687724.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:04.687Z,1509687724.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:05.074Z,1509687725.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:05.089Z,1509687725.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:05.472Z,1509687725.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:05.487Z,1509687725.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:05.874Z,1509687725.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:05.891Z,1509687725.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:06.271Z,1509687726.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:06.291Z,1509687726.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:06.671Z,1509687726.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:06.686Z,1509687726.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:07.076Z,1509687727.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:07.112Z,1509687727.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:07.472Z,1509687727.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:07.487Z,1509687727.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:07.868Z,1509687727.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:07.883Z,1509687727.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:08.266Z,1509687728.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:08.283Z,1509687728.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:08.683Z,1509687728.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:08.713Z,1509687728.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:09.071Z,1509687729.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:09.087Z,1509687729.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:09.474Z,1509687729.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:09.490Z,1509687729.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:09.871Z,1509687729.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:09.892Z,1509687729.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:10.274Z,1509687730.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:10.290Z,1509687730.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:10.678Z,1509687730.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:10.713Z,1509687730.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:11.071Z,1509687731.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:11.091Z,1509687731.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:11.474Z,1509687731.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:11.489Z,1509687731.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:11.921Z,1509687731.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:11.983Z,1509687731.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:12.271Z,1509687732.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:12.287Z,1509687732.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:12.671Z,1509687732.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:12.691Z,1509687732.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:13.070Z,1509687733.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:13.114Z,1509687733.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:13.471Z,1509687733.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:13.491Z,1509687733.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:13.906Z,1509687733.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:13.974Z,1509687733.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:14.271Z,1509687734.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:14.314Z,1509687734.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:14.671Z,1509687734.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:14.687Z,1509687734.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:15.070Z,1509687735.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:15.085Z,1509687735.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:15.471Z,1509687735.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:15.486Z,1509687735.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:15.895Z,1509687735.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:15.934Z,1509687735.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:16.271Z,1509687736.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:16.286Z,1509687736.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:16.671Z,1509687736.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:16.686Z,1509687736.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:17.072Z,1509687737.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:17.087Z,1509687737.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:17.471Z,1509687737.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:17.486Z,1509687737.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:17.872Z,1509687737.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:17.946Z,1509687737.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:18.276Z,1509687738.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:18.292Z,1509687738.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:18.675Z,1509687738.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:18.691Z,1509687738.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:19.075Z,1509687739.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:19.089Z,1509687739.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:19.474Z,1509687739.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:19.491Z,1509687739.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:19.875Z,1509687739.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:19.890Z,1509687739.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:20.269Z,1509687740.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:20.290Z,1509687740.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:20.674Z,1509687740.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:20.691Z,1509687740.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:21.074Z,1509687741.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:21.090Z,1509687741.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:21.474Z,1509687741.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:21.492Z,1509687741.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:21.874Z,1509687741.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:21.892Z,1509687741.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:22.274Z,1509687742.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:22.289Z,1509687742.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:22.669Z,1509687742.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:22.690Z,1509687742.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:23.075Z,1509687743.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:23.091Z,1509687743.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:23.474Z,1509687743.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:23.491Z,1509687743.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:23.869Z,1509687743.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:23.884Z,1509687743.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:24.275Z,1509687744.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:24.291Z,1509687744.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:24.675Z,1509687744.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:24.691Z,1509687744.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:25.075Z,1509687745.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:25.090Z,1509687745.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:25.474Z,1509687745.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:25.491Z,1509687745.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:25.919Z,1509687745.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:25.940Z,1509687745.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:26.273Z,1509687746.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:26.358Z,1509687746.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:26.675Z,1509687746.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:26.691Z,1509687746.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:27.075Z,1509687747.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:27.091Z,1509687747.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:27.475Z,1509687747.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:27.521Z,1509687747.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:27.900Z,1509687747.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:27.941Z,1509687747.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:28.276Z,1509687748.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:28.326Z,1509687748.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:31.451Z,1509687751.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:31.518Z,1509687751.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:31.647Z,1509687751.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:31.682Z,1509687751.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:32.048Z,1509687752.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:32.075Z,1509687752.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:32.450Z,1509687752.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:32.494Z,1509687752.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:32.848Z,1509687752.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:32.879Z,1509687752.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:33.244Z,1509687753.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:33.277Z,1509687753.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:33.649Z,1509687753.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:33.676Z,1509687753.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:34.051Z,1509687754.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:34.138Z,1509687754.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:34.449Z,1509687754.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:34.481Z,1509687754.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:34.846Z,1509687754.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:34.880Z,1509687754.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:35.252Z,1509687755.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:35.279Z,1509687755.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:35.648Z,1509687755.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:35.686Z,1509687755.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:36.050Z,1509687756.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:36.081Z,1509687756.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:36.474Z,1509687756.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:36.498Z,1509687756.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:36.853Z,1509687756.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:36.887Z,1509687756.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:37.243Z,1509687757.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:37.276Z,1509687757.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:37.649Z,1509687757.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:37.688Z,1509687757.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:38.044Z,1509687758.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:38.081Z,1509687758.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:38.452Z,1509687758.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:38.494Z,1509687758.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:38.850Z,1509687758.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:38.894Z,1509687758.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:39.243Z,1509687759.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:39.287Z,1509687759.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:39.650Z,1509687759.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:39.681Z,1509687759.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:40.048Z,1509687760.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:40.081Z,1509687760.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:40.448Z,1509687760.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:40.486Z,1509687760.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:40.850Z,1509687760.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:40.881Z,1509687760.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:41.248Z,1509687761.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:41.287Z,1509687761.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:41.652Z,1509687761.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:41.667Z,1509687761.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:42.062Z,1509687762.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:42.111Z,1509687762.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:42.448Z,1509687762.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:42.491Z,1509687762.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:42.855Z,1509687762.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:42.867Z,1509687762.867 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T05:42:42.867Z,1509687762.867 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:42:42.868Z,1509687762.868 [BPC1](ERROR): Data Fault
2017-11-03T05:42:42.897Z,1509687762.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:42.977Z,1509687762.977 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:42:43.249Z,1509687763.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:43.266Z,1509687763.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:43.647Z,1509687763.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:43.694Z,1509687763.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:44.051Z,1509687764.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:44.085Z,1509687764.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:44.168Z,1509687764.168 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:42:44.169Z,1509687764.169 [BPC1] No Fault, FailCount= 1
2017-11-03T05:42:44.446Z,1509687764.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:44.530Z,1509687764.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:44.849Z,1509687764.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:44.866Z,1509687764.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:45.247Z,1509687765.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:45.299Z,1509687765.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:45.646Z,1509687765.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:45.661Z,1509687765.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:46.052Z,1509687766.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:46.072Z,1509687766.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:46.448Z,1509687766.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:46.466Z,1509687766.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:46.846Z,1509687766.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:46.892Z,1509687766.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:47.247Z,1509687767.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:47.270Z,1509687767.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:47.646Z,1509687767.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:47.666Z,1509687767.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:48.057Z,1509687768.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:48.142Z,1509687768.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:48.451Z,1509687768.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:48.494Z,1509687768.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:48.850Z,1509687768.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:48.867Z,1509687768.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:49.250Z,1509687769.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:49.270Z,1509687769.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:49.654Z,1509687769.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:49.669Z,1509687769.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:50.051Z,1509687770.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:50.070Z,1509687770.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:50.469Z,1509687770.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:50.499Z,1509687770.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:50.857Z,1509687770.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:50.874Z,1509687770.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:51.256Z,1509687771.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:51.271Z,1509687771.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:51.652Z,1509687771.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:51.691Z,1509687771.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:52.053Z,1509687772.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:52.073Z,1509687772.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:52.470Z,1509687772.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:52.490Z,1509687772.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:52.593Z,1509687772.593 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T05:42:52.593Z,1509687772.593 [NAL9602] No Fault, FailCount= 5
2017-11-03T05:42:52.839Z,1509687772.839 [NAL9602](INFO): Powering up NAL9602
2017-11-03T05:42:52.860Z,1509687772.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:52.878Z,1509687772.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:53.256Z,1509687773.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:53.294Z,1509687773.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:53.657Z,1509687773.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:53.677Z,1509687773.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:54.055Z,1509687774.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:54.073Z,1509687774.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:54.458Z,1509687774.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:54.474Z,1509687774.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:54.856Z,1509687774.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:54.902Z,1509687774.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:55.255Z,1509687775.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:55.275Z,1509687775.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:55.658Z,1509687775.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:55.675Z,1509687775.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:56.057Z,1509687776.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:56.079Z,1509687776.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:56.456Z,1509687776.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:56.495Z,1509687776.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:56.856Z,1509687776.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:56.877Z,1509687776.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:57.257Z,1509687777.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:57.331Z,1509687777.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:57.656Z,1509687777.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:57.671Z,1509687777.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:58.055Z,1509687778.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:58.114Z,1509687778.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:58.456Z,1509687778.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:58.476Z,1509687778.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:58.862Z,1509687778.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:58.911Z,1509687778.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:59.256Z,1509687779.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:59.279Z,1509687779.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:42:59.658Z,1509687779.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:42:59.714Z,1509687779.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:00.067Z,1509687780.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:00.104Z,1509687780.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:00.460Z,1509687780.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:00.477Z,1509687780.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:00.864Z,1509687780.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:00.901Z,1509687780.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:01.260Z,1509687781.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:01.299Z,1509687781.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:01.653Z,1509687781.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:01.672Z,1509687781.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:02.082Z,1509687782.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:02.135Z,1509687782.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:02.457Z,1509687782.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:02.471Z,1509687782.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:02.855Z,1509687782.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:02.896Z,1509687782.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:03.256Z,1509687783.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:03.278Z,1509687783.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:03.664Z,1509687783.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:03.680Z,1509687783.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:04.031Z,1509687784.031 [NAL9602](INFO): NAL9602 initialized
2017-11-03T05:43:04.066Z,1509687784.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:04.101Z,1509687784.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:04.465Z,1509687784.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:04.502Z,1509687784.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:04.867Z,1509687784.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:04.904Z,1509687784.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:05.265Z,1509687785.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:05.280Z,1509687785.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:05.663Z,1509687785.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:05.678Z,1509687785.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:06.058Z,1509687786.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:06.097Z,1509687786.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:06.469Z,1509687786.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:06.499Z,1509687786.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:06.874Z,1509687786.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:06.901Z,1509687786.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:07.259Z,1509687787.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:07.275Z,1509687787.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:07.665Z,1509687787.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:07.702Z,1509687787.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:08.061Z,1509687788.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:08.082Z,1509687788.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:08.464Z,1509687788.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:08.479Z,1509687788.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:08.859Z,1509687788.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:08.874Z,1509687788.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:09.259Z,1509687789.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:09.296Z,1509687789.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:09.657Z,1509687789.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:09.677Z,1509687789.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:10.067Z,1509687790.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:10.106Z,1509687790.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:10.465Z,1509687790.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:10.480Z,1509687790.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:10.865Z,1509687790.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:10.906Z,1509687790.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:11.261Z,1509687791.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:11.320Z,1509687791.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:11.661Z,1509687791.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:11.719Z,1509687791.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:12.057Z,1509687792.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:12.077Z,1509687792.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:12.458Z,1509687792.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:12.514Z,1509687792.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:12.858Z,1509687792.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:12.878Z,1509687792.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:13.252Z,1509687793.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:13.307Z,1509687793.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:13.663Z,1509687793.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:13.719Z,1509687793.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:14.081Z,1509687794.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:14.106Z,1509687794.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:14.467Z,1509687794.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:14.502Z,1509687794.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:14.860Z,1509687794.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:14.877Z,1509687794.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:15.260Z,1509687795.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:15.275Z,1509687795.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:15.659Z,1509687795.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:15.697Z,1509687795.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:16.056Z,1509687796.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:16.136Z,1509687796.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:16.468Z,1509687796.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:16.483Z,1509687796.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:16.868Z,1509687796.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:16.907Z,1509687796.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:17.264Z,1509687797.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:17.305Z,1509687797.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:17.657Z,1509687797.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:17.677Z,1509687797.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:18.061Z,1509687798.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:18.083Z,1509687798.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:18.474Z,1509687798.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:18.509Z,1509687798.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:18.861Z,1509687798.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:18.899Z,1509687798.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:19.258Z,1509687799.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:19.278Z,1509687799.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:19.667Z,1509687799.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:19.683Z,1509687799.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:20.012Z,1509687800.012 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:43:20.012Z,1509687800.012 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T05:43:20.012Z,1509687800.012 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:43:20.081Z,1509687800.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:20.104Z,1509687800.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:43:20.105Z,1509687800.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:20.188Z,1509687800.188 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:43:20.420Z,1509687800.420 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:43:20.515Z,1509687800.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:20.542Z,1509687800.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T05:43:20.543Z,1509687800.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:20.623Z,1509687800.623 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:43:20.857Z,1509687800.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:20.890Z,1509687800.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:43:20.891Z,1509687800.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:21.260Z,1509687801.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:21.283Z,1509687801.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:43:21.284Z,1509687801.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:21.661Z,1509687801.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:21.676Z,1509687801.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:43:21.677Z,1509687801.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:22.056Z,1509687802.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:22.090Z,1509687802.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:43:22.091Z,1509687802.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:22.189Z,1509687802.189 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:43:22.189Z,1509687802.189 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T05:43:22.237Z,1509687802.237 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:43:22.237Z,1509687802.237 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:43:22.238Z,1509687802.238 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:43:22.238Z,1509687802.238 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:43:22.470Z,1509687802.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:22.486Z,1509687802.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:43:22.486Z,1509687802.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:22.870Z,1509687802.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:22.890Z,1509687802.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:43:22.891Z,1509687802.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:23.271Z,1509687803.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:23.290Z,1509687803.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:43:23.291Z,1509687803.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:23.658Z,1509687803.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:23.690Z,1509687803.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:43:23.691Z,1509687803.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:24.054Z,1509687804.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:24.073Z,1509687804.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:43:24.074Z,1509687804.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:24.460Z,1509687804.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:24.476Z,1509687804.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:43:24.477Z,1509687804.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:24.882Z,1509687804.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:24.913Z,1509687804.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:43:24.914Z,1509687804.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:25.259Z,1509687805.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:25.290Z,1509687805.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:43:25.291Z,1509687805.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:25.670Z,1509687805.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:25.758Z,1509687805.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T05:43:25.759Z,1509687805.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:26.073Z,1509687806.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:26.088Z,1509687806.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:43:26.089Z,1509687806.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:26.355Z,1509687806.355 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:43:26.433Z,1509687806.433 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:43:26.434Z,1509687806.434 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:43:26.435Z,1509687806.435 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:43:26.436Z,1509687806.436 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:43:26.484Z,1509687806.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:26.534Z,1509687806.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T05:43:26.535Z,1509687806.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:26.867Z,1509687806.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:26.923Z,1509687806.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:27.311Z,1509687807.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:27.378Z,1509687807.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:27.663Z,1509687807.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:27.714Z,1509687807.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:28.058Z,1509687808.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:28.111Z,1509687808.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:28.466Z,1509687808.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:28.504Z,1509687808.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:31.658Z,1509687811.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:31.675Z,1509687811.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:31.855Z,1509687811.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:31.938Z,1509687811.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:32.217Z,1509687812.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:32.232Z,1509687812.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:32.620Z,1509687812.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:32.635Z,1509687812.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:33.016Z,1509687813.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:33.031Z,1509687813.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:33.429Z,1509687813.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:33.462Z,1509687813.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:33.850Z,1509687813.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:33.886Z,1509687813.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:34.224Z,1509687814.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:34.247Z,1509687814.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:34.622Z,1509687814.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:34.637Z,1509687814.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:35.019Z,1509687815.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:35.034Z,1509687815.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:35.425Z,1509687815.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:35.441Z,1509687815.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:35.834Z,1509687815.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:35.892Z,1509687815.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:36.226Z,1509687816.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:36.241Z,1509687816.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:36.622Z,1509687816.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:36.638Z,1509687816.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:37.021Z,1509687817.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:37.036Z,1509687817.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:37.430Z,1509687817.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:37.445Z,1509687817.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:37.825Z,1509687817.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:37.840Z,1509687817.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:38.229Z,1509687818.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:38.259Z,1509687818.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:38.616Z,1509687818.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:38.646Z,1509687818.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:39.015Z,1509687819.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:39.045Z,1509687819.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:39.434Z,1509687819.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:39.449Z,1509687819.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:39.833Z,1509687819.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:39.849Z,1509687819.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:40.233Z,1509687820.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:40.307Z,1509687820.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:40.614Z,1509687820.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:40.638Z,1509687820.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:41.015Z,1509687821.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:41.047Z,1509687821.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:41.433Z,1509687821.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:41.479Z,1509687821.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:41.835Z,1509687821.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:41.855Z,1509687821.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:42.236Z,1509687822.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:42.297Z,1509687822.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:42.616Z,1509687822.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:42.663Z,1509687822.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:43.013Z,1509687823.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:43.028Z,1509687823.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:43.439Z,1509687823.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:43.459Z,1509687823.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:43.825Z,1509687823.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:43.855Z,1509687823.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:44.234Z,1509687824.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:44.261Z,1509687824.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:44.616Z,1509687824.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:44.632Z,1509687824.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:45.016Z,1509687825.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:45.031Z,1509687825.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:45.433Z,1509687825.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:45.463Z,1509687825.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:45.839Z,1509687825.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:45.891Z,1509687825.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:46.225Z,1509687826.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:46.240Z,1509687826.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:46.240Z,1509687826.240 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 110
2017-11-03T05:43:46.241Z,1509687826.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:43:46.242Z,1509687826.242 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:46.242Z,1509687826.242 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 110
2017-11-03T05:43:46.242Z,1509687826.242 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:43:46.260Z,1509687826.260 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:46.260Z,1509687826.260 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110
2017-11-03T05:43:46.261Z,1509687826.261 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:43:46.360Z,1509687826.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:43:46.361Z,1509687826.361 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:43:46.361Z,1509687826.361 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:43:46.618Z,1509687826.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:46.708Z,1509687826.708 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:43:46.709Z,1509687826.709 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 110
2017-11-03T05:43:46.709Z,1509687826.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:43:46.709Z,1509687826.709 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 110
2017-11-03T05:43:46.710Z,1509687826.710 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:43:46.710Z,1509687826.710 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110
2017-11-03T05:43:47.020Z,1509687827.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:47.041Z,1509687827.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:43:47.042Z,1509687827.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:43:47.042Z,1509687827.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:43:47.043Z,1509687827.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:43:47.043Z,1509687827.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:43:47.043Z,1509687827.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:43:47.044Z,1509687827.044 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:43:47.044Z,1509687827.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:43:47.045Z,1509687827.045 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:43:47.428Z,1509687827.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:47.451Z,1509687827.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:47.873Z,1509687827.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:47.910Z,1509687827.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:48.225Z,1509687828.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:48.255Z,1509687828.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:48.615Z,1509687828.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:48.647Z,1509687828.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:49.013Z,1509687829.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:49.051Z,1509687829.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:49.425Z,1509687829.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:49.457Z,1509687829.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:49.839Z,1509687829.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:49.921Z,1509687829.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:50.230Z,1509687830.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:50.270Z,1509687830.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:50.618Z,1509687830.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:50.634Z,1509687830.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:51.015Z,1509687831.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:51.031Z,1509687831.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:51.430Z,1509687831.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:51.457Z,1509687831.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:51.829Z,1509687831.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:51.861Z,1509687831.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:52.228Z,1509687832.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:52.243Z,1509687832.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:52.623Z,1509687832.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:52.638Z,1509687832.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:53.023Z,1509687833.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:53.043Z,1509687833.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:53.429Z,1509687833.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:53.444Z,1509687833.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:53.830Z,1509687833.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:53.845Z,1509687833.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:54.228Z,1509687834.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:54.243Z,1509687834.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:54.622Z,1509687834.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:54.690Z,1509687834.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:55.025Z,1509687835.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:55.090Z,1509687835.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:55.433Z,1509687835.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:55.455Z,1509687835.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:55.838Z,1509687835.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:55.883Z,1509687835.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:56.231Z,1509687836.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:56.251Z,1509687836.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:56.608Z,1509687836.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:56.670Z,1509687836.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:57.018Z,1509687837.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:57.082Z,1509687837.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:57.437Z,1509687837.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:57.452Z,1509687837.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:57.836Z,1509687837.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:57.851Z,1509687837.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:58.234Z,1509687838.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:58.249Z,1509687838.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:58.612Z,1509687838.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:58.647Z,1509687838.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:59.024Z,1509687839.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:59.040Z,1509687839.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:59.434Z,1509687839.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:59.449Z,1509687839.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:43:59.872Z,1509687839.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:43:59.899Z,1509687839.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:00.230Z,1509687840.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:00.245Z,1509687840.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:00.614Z,1509687840.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:00.640Z,1509687840.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:01.008Z,1509687841.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:01.038Z,1509687841.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:01.429Z,1509687841.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:01.445Z,1509687841.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:01.888Z,1509687841.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:01.926Z,1509687841.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:02.233Z,1509687842.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:02.259Z,1509687842.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:02.620Z,1509687842.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:02.656Z,1509687842.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:03.016Z,1509687843.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:03.031Z,1509687843.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:03.425Z,1509687843.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:03.456Z,1509687843.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:03.856Z,1509687843.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:03.910Z,1509687843.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:04.229Z,1509687844.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:04.253Z,1509687844.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:04.617Z,1509687844.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:04.658Z,1509687844.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:05.019Z,1509687845.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:05.034Z,1509687845.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:05.429Z,1509687845.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:05.454Z,1509687845.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:05.833Z,1509687845.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:05.862Z,1509687845.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:06.225Z,1509687846.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:06.241Z,1509687846.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:06.622Z,1509687846.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:06.637Z,1509687846.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:07.023Z,1509687847.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:07.038Z,1509687847.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:07.426Z,1509687847.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:07.442Z,1509687847.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:07.830Z,1509687847.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:07.845Z,1509687847.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:08.238Z,1509687848.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:08.271Z,1509687848.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:08.623Z,1509687848.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:08.647Z,1509687848.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:09.020Z,1509687849.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:09.036Z,1509687849.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:09.429Z,1509687849.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:09.510Z,1509687849.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:09.832Z,1509687849.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:09.847Z,1509687849.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:10.232Z,1509687850.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:10.279Z,1509687850.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:10.607Z,1509687850.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:10.641Z,1509687850.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:11.023Z,1509687851.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:11.082Z,1509687851.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:11.429Z,1509687851.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:11.479Z,1509687851.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:11.832Z,1509687851.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:11.847Z,1509687851.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:12.232Z,1509687852.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:12.247Z,1509687852.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:12.614Z,1509687852.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:12.637Z,1509687852.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:13.018Z,1509687853.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:13.033Z,1509687853.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:13.432Z,1509687853.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:13.455Z,1509687853.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:13.847Z,1509687853.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:13.889Z,1509687853.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:14.227Z,1509687854.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:14.251Z,1509687854.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:14.621Z,1509687854.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:14.637Z,1509687854.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:15.021Z,1509687855.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:15.042Z,1509687855.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:15.429Z,1509687855.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:15.444Z,1509687855.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:15.850Z,1509687855.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:15.889Z,1509687855.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:16.233Z,1509687856.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:16.248Z,1509687856.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:16.615Z,1509687856.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:16.641Z,1509687856.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:17.013Z,1509687857.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:17.038Z,1509687857.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:17.433Z,1509687857.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:17.448Z,1509687857.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:17.890Z,1509687857.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:17.913Z,1509687857.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:18.225Z,1509687858.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:18.247Z,1509687858.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:18.616Z,1509687858.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:18.643Z,1509687858.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:19.019Z,1509687859.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:19.048Z,1509687859.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:19.435Z,1509687859.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:19.451Z,1509687859.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:19.834Z,1509687859.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:19.849Z,1509687859.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:20.233Z,1509687860.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:20.258Z,1509687860.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:20.617Z,1509687860.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:20.632Z,1509687860.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:21.019Z,1509687861.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:21.035Z,1509687861.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:21.425Z,1509687861.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:21.440Z,1509687861.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:21.829Z,1509687861.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:21.860Z,1509687861.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:22.238Z,1509687862.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:22.267Z,1509687862.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:22.617Z,1509687862.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:22.632Z,1509687862.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:23.012Z,1509687863.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:23.027Z,1509687863.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:23.430Z,1509687863.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:23.485Z,1509687863.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:23.829Z,1509687863.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:23.883Z,1509687863.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:24.229Z,1509687864.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:24.261Z,1509687864.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:24.622Z,1509687864.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:24.675Z,1509687864.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:25.016Z,1509687865.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:25.031Z,1509687865.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:25.429Z,1509687865.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:25.483Z,1509687865.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:25.833Z,1509687865.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:25.879Z,1509687865.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:26.221Z,1509687866.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:26.236Z,1509687866.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:26.619Z,1509687866.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:26.634Z,1509687866.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:27.020Z,1509687867.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:27.035Z,1509687867.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:27.429Z,1509687867.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:27.444Z,1509687867.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:27.848Z,1509687867.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:27.893Z,1509687867.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:28.232Z,1509687868.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:28.255Z,1509687868.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:28.625Z,1509687868.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:28.641Z,1509687868.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:31.798Z,1509687871.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:31.885Z,1509687871.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:32.064Z,1509687872.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:32.085Z,1509687872.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:32.463Z,1509687872.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:32.494Z,1509687872.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:32.854Z,1509687872.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:32.890Z,1509687872.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:33.243Z,1509687873.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:33.278Z,1509687873.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:33.649Z,1509687873.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:33.675Z,1509687873.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:34.055Z,1509687874.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:34.095Z,1509687874.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:34.453Z,1509687874.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:34.480Z,1509687874.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:34.863Z,1509687874.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:34.883Z,1509687874.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:35.256Z,1509687875.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:35.278Z,1509687875.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:35.644Z,1509687875.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:35.683Z,1509687875.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:36.041Z,1509687876.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:36.094Z,1509687876.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:36.460Z,1509687876.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:36.468Z,1509687876.468 [PNI_TCM](ERROR): CRC does not match. Expected:0x65164 got:0x2676
2017-11-03T05:44:36.495Z,1509687876.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:36.860Z,1509687876.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:36.894Z,1509687876.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:37.257Z,1509687877.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:37.298Z,1509687877.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:37.644Z,1509687877.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:37.659Z,1509687877.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:38.044Z,1509687878.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:38.131Z,1509687878.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:38.465Z,1509687878.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:38.500Z,1509687878.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:38.851Z,1509687878.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:38.891Z,1509687878.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:39.250Z,1509687879.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:39.299Z,1509687879.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:39.665Z,1509687879.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:39.679Z,1509687879.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:40.062Z,1509687880.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:40.114Z,1509687880.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:40.464Z,1509687880.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:40.523Z,1509687880.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:40.849Z,1509687880.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:40.868Z,1509687880.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:41.248Z,1509687881.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:41.268Z,1509687881.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:41.651Z,1509687881.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:41.674Z,1509687881.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:42.039Z,1509687882.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:42.070Z,1509687882.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:42.461Z,1509687882.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:42.481Z,1509687882.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:42.864Z,1509687882.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:42.879Z,1509687882.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:43.269Z,1509687883.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:43.284Z,1509687883.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:43.650Z,1509687883.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:43.685Z,1509687883.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:44.039Z,1509687884.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:44.067Z,1509687884.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:44.451Z,1509687884.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:44.471Z,1509687884.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:44.853Z,1509687884.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:44.878Z,1509687884.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:45.248Z,1509687885.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:45.285Z,1509687885.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:45.666Z,1509687885.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:45.684Z,1509687885.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:46.063Z,1509687886.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:46.083Z,1509687886.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:46.465Z,1509687886.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:46.480Z,1509687886.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:46.850Z,1509687886.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:46.879Z,1509687886.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:47.249Z,1509687887.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:47.267Z,1509687887.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:47.649Z,1509687887.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:47.669Z,1509687887.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:48.065Z,1509687888.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:48.080Z,1509687888.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:48.461Z,1509687888.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:48.506Z,1509687888.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:48.865Z,1509687888.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:48.883Z,1509687888.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:49.267Z,1509687889.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:49.282Z,1509687889.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:49.654Z,1509687889.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:49.669Z,1509687889.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:50.050Z,1509687890.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:50.125Z,1509687890.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:50.441Z,1509687890.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:50.475Z,1509687890.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:50.840Z,1509687890.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:50.866Z,1509687890.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:51.244Z,1509687891.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:51.284Z,1509687891.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:51.649Z,1509687891.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:51.689Z,1509687891.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:52.057Z,1509687892.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:52.114Z,1509687892.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:52.484Z,1509687892.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:52.499Z,1509687892.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:52.847Z,1509687892.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:52.914Z,1509687892.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:53.249Z,1509687893.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:53.291Z,1509687893.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:53.646Z,1509687893.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:53.661Z,1509687893.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:54.045Z,1509687894.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:54.107Z,1509687894.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:54.479Z,1509687894.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:54.499Z,1509687894.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:54.857Z,1509687894.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:54.919Z,1509687894.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:55.257Z,1509687895.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:55.289Z,1509687895.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:55.646Z,1509687895.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:55.703Z,1509687895.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:56.052Z,1509687896.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:56.086Z,1509687896.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:56.446Z,1509687896.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:56.492Z,1509687896.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:56.845Z,1509687896.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:56.861Z,1509687896.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:57.249Z,1509687897.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:57.285Z,1509687897.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:57.663Z,1509687897.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:57.686Z,1509687897.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:58.062Z,1509687898.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:58.107Z,1509687898.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:58.458Z,1509687898.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:58.489Z,1509687898.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:58.844Z,1509687898.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:58.865Z,1509687898.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:59.245Z,1509687899.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:59.264Z,1509687899.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:44:59.645Z,1509687899.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:44:59.694Z,1509687899.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:00.049Z,1509687900.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:00.067Z,1509687900.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:00.450Z,1509687900.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:00.471Z,1509687900.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:00.861Z,1509687900.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:00.892Z,1509687900.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:01.262Z,1509687901.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:01.296Z,1509687901.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:01.644Z,1509687901.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:01.659Z,1509687901.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:02.046Z,1509687902.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:02.066Z,1509687902.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:02.451Z,1509687902.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:02.467Z,1509687902.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:02.853Z,1509687902.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:02.894Z,1509687902.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:03.246Z,1509687903.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:03.268Z,1509687903.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:03.664Z,1509687903.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:03.698Z,1509687903.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:04.070Z,1509687904.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:04.145Z,1509687904.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:04.454Z,1509687904.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:04.498Z,1509687904.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:04.849Z,1509687904.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:04.867Z,1509687904.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:05.248Z,1509687905.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:05.268Z,1509687905.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:05.648Z,1509687905.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:05.669Z,1509687905.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:06.050Z,1509687906.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:06.091Z,1509687906.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:06.483Z,1509687906.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:06.505Z,1509687906.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:06.855Z,1509687906.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:06.867Z,1509687906.867 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T05:45:06.867Z,1509687906.867 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:45:06.867Z,1509687906.867 [BPC1](ERROR): Data Fault
2017-11-03T05:45:06.875Z,1509687906.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:06.986Z,1509687906.986 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:45:07.257Z,1509687907.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:07.272Z,1509687907.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:07.653Z,1509687907.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:07.693Z,1509687907.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:08.044Z,1509687908.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:08.060Z,1509687908.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:08.157Z,1509687908.157 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:45:08.157Z,1509687908.157 [BPC1] No Fault, FailCount= 1
2017-11-03T05:45:08.460Z,1509687908.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:08.559Z,1509687908.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:08.860Z,1509687908.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:08.875Z,1509687908.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:09.254Z,1509687909.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:09.314Z,1509687909.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:09.651Z,1509687909.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:09.672Z,1509687909.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:10.038Z,1509687910.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:10.073Z,1509687910.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:10.458Z,1509687910.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:10.475Z,1509687910.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:10.856Z,1509687910.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:10.897Z,1509687910.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:11.256Z,1509687911.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:11.276Z,1509687911.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:11.648Z,1509687911.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:11.668Z,1509687911.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:12.042Z,1509687912.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:12.072Z,1509687912.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:12.450Z,1509687912.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:12.485Z,1509687912.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:12.850Z,1509687912.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:12.868Z,1509687912.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:13.236Z,1509687913.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:13.267Z,1509687913.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:13.662Z,1509687913.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:13.683Z,1509687913.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:14.065Z,1509687914.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:14.105Z,1509687914.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:14.461Z,1509687914.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:14.481Z,1509687914.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:14.850Z,1509687914.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:14.886Z,1509687914.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:15.249Z,1509687915.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:15.262Z,1509687915.262 [PNI_TCM](ERROR): CRC does not match. Expected:0x41015 got:0x19519
2017-11-03T05:45:15.290Z,1509687915.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:15.652Z,1509687915.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:15.679Z,1509687915.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:16.039Z,1509687916.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:16.067Z,1509687916.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:16.463Z,1509687916.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:16.478Z,1509687916.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:16.866Z,1509687916.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:16.881Z,1509687916.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:17.261Z,1509687917.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:17.306Z,1509687917.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:17.649Z,1509687917.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:17.667Z,1509687917.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:18.052Z,1509687918.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:18.131Z,1509687918.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:18.465Z,1509687918.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:18.480Z,1509687918.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:18.861Z,1509687918.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:18.905Z,1509687918.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:19.261Z,1509687919.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:19.284Z,1509687919.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:19.643Z,1509687919.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:19.675Z,1509687919.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:20.044Z,1509687920.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:20.073Z,1509687920.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:20.469Z,1509687920.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:20.511Z,1509687920.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:20.862Z,1509687920.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:20.874Z,1509687920.874 [PNI_TCM](ERROR): CRC does not match. Expected:0x46703 got:0x56945
2017-11-03T05:45:20.899Z,1509687920.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:21.266Z,1509687921.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:21.339Z,1509687921.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:21.643Z,1509687921.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:21.675Z,1509687921.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:22.043Z,1509687922.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:22.115Z,1509687922.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:22.482Z,1509687922.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:22.503Z,1509687922.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:22.866Z,1509687922.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:22.922Z,1509687922.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:23.263Z,1509687923.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:23.319Z,1509687923.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:23.642Z,1509687923.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:23.676Z,1509687923.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:24.051Z,1509687924.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:24.082Z,1509687924.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:24.466Z,1509687924.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:24.481Z,1509687924.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:24.862Z,1509687924.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:24.882Z,1509687924.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:25.263Z,1509687925.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:25.294Z,1509687925.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:25.644Z,1509687925.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:25.681Z,1509687925.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:26.039Z,1509687926.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:26.078Z,1509687926.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:26.440Z,1509687926.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:26.473Z,1509687926.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:26.844Z,1509687926.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:26.883Z,1509687926.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:27.240Z,1509687927.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:27.279Z,1509687927.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:27.649Z,1509687927.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:27.680Z,1509687927.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:28.063Z,1509687928.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:28.078Z,1509687928.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:28.081Z,1509687928.081 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T05:45:28.082Z,1509687928.082 [Default:CheckIn:C.Wait] Stopped
2017-11-03T05:45:28.082Z,1509687928.082 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T05:45:28.082Z,1509687928.082 [Default:CheckIn:D] Running Loop=1
2017-11-03T05:45:28.461Z,1509687928.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:28.495Z,1509687928.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:28.498Z,1509687928.498 [Default:CheckIn:D] Stopped
2017-11-03T05:45:28.498Z,1509687928.498 [Default:CheckIn:E] Running Loop=1
2017-11-03T05:45:28.844Z,1509687928.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:28.881Z,1509687928.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:28.885Z,1509687928.885 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 330.348861 min 
2017-11-03T05:45:28.885Z,1509687928.885 [Default:CheckIn:E] Stopped
2017-11-03T05:45:28.885Z,1509687928.885 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T05:45:28.885Z,1509687928.885 [Default:CheckIn] Stopped
2017-11-03T05:45:28.885Z,1509687928.885 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T05:45:28.885Z,1509687928.885 [Default:CheckIn](INFO): Running loop #33
2017-11-03T05:45:28.886Z,1509687928.886 [Default:CheckIn] Running Loop=33
2017-11-03T05:45:28.886Z,1509687928.886 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T05:45:28.886Z,1509687928.886 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T05:45:32.175Z,1509687932.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:32.193Z,1509687932.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:32.305Z,1509687932.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:32.334Z,1509687932.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:32.727Z,1509687932.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:32.742Z,1509687932.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:33.134Z,1509687933.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:33.149Z,1509687933.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:33.527Z,1509687933.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:33.542Z,1509687933.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:33.905Z,1509687933.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:33.941Z,1509687933.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:34.307Z,1509687934.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:34.334Z,1509687934.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:34.709Z,1509687934.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:34.724Z,1509687934.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:35.104Z,1509687935.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:35.171Z,1509687935.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:35.514Z,1509687935.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:35.529Z,1509687935.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:35.922Z,1509687935.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:35.953Z,1509687935.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:36.321Z,1509687936.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:36.408Z,1509687936.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:36.708Z,1509687936.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:36.722Z,1509687936.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:37.108Z,1509687937.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:37.170Z,1509687937.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:37.516Z,1509687937.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:37.563Z,1509687937.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:37.919Z,1509687937.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:37.946Z,1509687937.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:38.309Z,1509687938.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:38.324Z,1509687938.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:38.721Z,1509687938.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:38.753Z,1509687938.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:39.122Z,1509687939.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:39.153Z,1509687939.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:39.522Z,1509687939.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:39.557Z,1509687939.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:39.922Z,1509687939.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:39.953Z,1509687939.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:40.309Z,1509687940.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:40.324Z,1509687940.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:40.712Z,1509687940.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:40.727Z,1509687940.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:41.114Z,1509687941.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:41.128Z,1509687941.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:41.514Z,1509687941.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:41.529Z,1509687941.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:41.956Z,1509687941.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:41.971Z,1509687941.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:42.325Z,1509687942.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:42.357Z,1509687942.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:42.712Z,1509687942.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:42.727Z,1509687942.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:43.108Z,1509687943.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:43.131Z,1509687943.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:43.512Z,1509687943.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:43.526Z,1509687943.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:43.954Z,1509687943.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:43.973Z,1509687943.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:44.312Z,1509687944.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:44.327Z,1509687944.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:44.718Z,1509687944.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:44.733Z,1509687944.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:45.125Z,1509687945.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:45.157Z,1509687945.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:45.518Z,1509687945.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:45.533Z,1509687945.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:45.914Z,1509687945.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:45.929Z,1509687945.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:46.316Z,1509687946.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:46.331Z,1509687946.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:46.713Z,1509687946.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:46.729Z,1509687946.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:47.114Z,1509687947.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:47.129Z,1509687947.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:47.518Z,1509687947.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:47.533Z,1509687947.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:47.918Z,1509687947.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:47.933Z,1509687947.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:48.317Z,1509687948.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:48.338Z,1509687948.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:48.701Z,1509687948.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:48.716Z,1509687948.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:49.105Z,1509687949.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:49.120Z,1509687949.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:49.505Z,1509687949.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:49.582Z,1509687949.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:49.904Z,1509687949.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:49.920Z,1509687949.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:50.304Z,1509687950.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:50.327Z,1509687950.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:50.721Z,1509687950.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:50.775Z,1509687950.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:51.121Z,1509687951.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:51.152Z,1509687951.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:51.522Z,1509687951.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:51.575Z,1509687951.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:51.922Z,1509687951.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:51.967Z,1509687951.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:52.309Z,1509687952.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:52.325Z,1509687952.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:52.708Z,1509687952.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:52.724Z,1509687952.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:53.110Z,1509687953.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:53.125Z,1509687953.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:53.521Z,1509687953.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:53.553Z,1509687953.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:53.952Z,1509687953.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:53.967Z,1509687953.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:54.321Z,1509687954.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:54.357Z,1509687954.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:54.708Z,1509687954.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:54.723Z,1509687954.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:55.111Z,1509687955.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:55.138Z,1509687955.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:55.512Z,1509687955.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:55.526Z,1509687955.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:55.933Z,1509687955.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:55.959Z,1509687955.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:56.313Z,1509687956.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:56.328Z,1509687956.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:56.718Z,1509687956.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:56.733Z,1509687956.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:57.118Z,1509687957.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:57.133Z,1509687957.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:57.518Z,1509687957.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:57.533Z,1509687957.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:57.955Z,1509687957.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:58.014Z,1509687958.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:58.308Z,1509687958.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:58.323Z,1509687958.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:58.715Z,1509687958.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:58.735Z,1509687958.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:59.114Z,1509687959.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:59.134Z,1509687959.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:59.518Z,1509687959.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:59.533Z,1509687959.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:45:59.918Z,1509687959.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:45:59.933Z,1509687959.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:00.329Z,1509687960.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:00.361Z,1509687960.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:00.717Z,1509687960.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:00.739Z,1509687960.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:01.114Z,1509687961.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:01.129Z,1509687961.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:01.514Z,1509687961.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:01.529Z,1509687961.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:01.913Z,1509687961.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:01.928Z,1509687961.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:02.314Z,1509687962.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:02.329Z,1509687962.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:02.729Z,1509687962.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:02.744Z,1509687962.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:03.125Z,1509687963.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:03.141Z,1509687963.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:03.525Z,1509687963.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:03.543Z,1509687963.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:03.911Z,1509687963.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:04.004Z,1509687964.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:04.301Z,1509687964.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:04.336Z,1509687964.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:04.704Z,1509687964.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:04.759Z,1509687964.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:05.105Z,1509687965.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:05.120Z,1509687965.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:05.514Z,1509687965.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:05.567Z,1509687965.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:05.944Z,1509687965.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:05.998Z,1509687965.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:06.318Z,1509687966.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:06.351Z,1509687966.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:06.703Z,1509687966.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:06.719Z,1509687966.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:07.108Z,1509687967.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:07.123Z,1509687967.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:07.511Z,1509687967.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:07.547Z,1509687967.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:07.920Z,1509687967.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:07.950Z,1509687967.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:08.311Z,1509687968.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:08.343Z,1509687968.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:08.722Z,1509687968.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:08.746Z,1509687968.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:09.120Z,1509687969.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:09.160Z,1509687969.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:09.523Z,1509687969.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:09.559Z,1509687969.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:09.960Z,1509687969.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:10.055Z,1509687970.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:10.313Z,1509687970.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:10.341Z,1509687970.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:10.714Z,1509687970.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:10.738Z,1509687970.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:11.105Z,1509687971.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:11.155Z,1509687971.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:11.524Z,1509687971.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:11.577Z,1509687971.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:11.942Z,1509687971.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:11.991Z,1509687971.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:12.345Z,1509687972.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:12.389Z,1509687972.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:12.703Z,1509687972.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:12.743Z,1509687972.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:13.111Z,1509687973.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:13.166Z,1509687973.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:13.511Z,1509687973.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:13.549Z,1509687973.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:13.906Z,1509687973.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:13.949Z,1509687973.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:14.305Z,1509687974.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:14.353Z,1509687974.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:14.728Z,1509687974.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:14.765Z,1509687974.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:15.122Z,1509687975.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:15.154Z,1509687975.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:15.518Z,1509687975.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:15.563Z,1509687975.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:15.914Z,1509687975.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:15.939Z,1509687975.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:16.313Z,1509687976.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:16.386Z,1509687976.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:16.712Z,1509687976.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:16.740Z,1509687976.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:17.130Z,1509687977.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:17.185Z,1509687977.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:17.523Z,1509687977.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:17.599Z,1509687977.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:17.927Z,1509687977.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:17.955Z,1509687977.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:18.328Z,1509687978.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:18.426Z,1509687978.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:18.713Z,1509687978.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:18.743Z,1509687978.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:19.149Z,1509687979.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:19.198Z,1509687979.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:19.505Z,1509687979.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:19.570Z,1509687979.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:19.905Z,1509687979.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:19.981Z,1509687979.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:20.320Z,1509687980.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:20.390Z,1509687980.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:20.728Z,1509687980.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:20.783Z,1509687980.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:21.117Z,1509687981.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:21.132Z,1509687981.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:21.517Z,1509687981.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:21.533Z,1509687981.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:21.905Z,1509687981.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:21.943Z,1509687981.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:22.315Z,1509687982.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:22.343Z,1509687982.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:22.708Z,1509687982.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:22.744Z,1509687982.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:23.105Z,1509687983.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:23.156Z,1509687983.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:23.527Z,1509687983.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:23.547Z,1509687983.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:23.927Z,1509687983.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:23.959Z,1509687983.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:24.328Z,1509687984.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:24.347Z,1509687984.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:24.704Z,1509687984.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:24.747Z,1509687984.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:25.104Z,1509687985.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:25.144Z,1509687985.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:25.519Z,1509687985.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:25.598Z,1509687985.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:25.949Z,1509687985.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:26.036Z,1509687986.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:26.304Z,1509687986.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:26.342Z,1509687986.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:26.717Z,1509687986.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:26.744Z,1509687986.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:27.113Z,1509687987.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:27.143Z,1509687987.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:27.513Z,1509687987.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:27.541Z,1509687987.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:27.907Z,1509687987.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:27.922Z,1509687987.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:28.307Z,1509687988.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:28.344Z,1509687988.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:28.708Z,1509687988.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:28.723Z,1509687988.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:29.107Z,1509687989.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:29.147Z,1509687989.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:32.330Z,1509687992.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:32.346Z,1509687992.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:32.578Z,1509687992.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:32.596Z,1509687992.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:32.981Z,1509687992.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:33.054Z,1509687993.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:33.377Z,1509687993.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:33.446Z,1509687993.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:33.779Z,1509687993.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:33.794Z,1509687993.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:34.179Z,1509687994.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:34.206Z,1509687994.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:34.594Z,1509687994.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:34.654Z,1509687994.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:34.981Z,1509687994.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:35.008Z,1509687995.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:35.382Z,1509687995.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:35.445Z,1509687995.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:35.772Z,1509687995.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:35.858Z,1509687995.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:36.169Z,1509687996.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:36.185Z,1509687996.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:36.569Z,1509687996.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:36.585Z,1509687996.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:36.720Z,1509687996.720 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:46:36.720Z,1509687996.720 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T05:46:36.720Z,1509687996.720 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:46:36.969Z,1509687996.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:36.984Z,1509687996.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T05:46:36.985Z,1509687996.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:37.096Z,1509687997.096 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:46:37.124Z,1509687997.124 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:46:37.220Z,1509687997.220 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:46:37.373Z,1509687997.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:37.408Z,1509687997.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:46:37.413Z,1509687997.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:37.813Z,1509687997.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:37.921Z,1509687997.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-03T05:46:37.922Z,1509687997.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:38.181Z,1509687998.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:38.213Z,1509687998.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:46:38.214Z,1509687998.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:38.585Z,1509687998.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:38.610Z,1509687998.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:46:38.611Z,1509687998.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:38.708Z,1509687998.708 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:46:38.708Z,1509687998.708 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T05:46:38.836Z,1509687998.836 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:46:38.837Z,1509687998.837 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:46:38.837Z,1509687998.837 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:46:38.837Z,1509687998.837 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:46:38.971Z,1509687998.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:38.986Z,1509687998.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:46:38.987Z,1509687998.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:39.368Z,1509687999.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:39.383Z,1509687999.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:46:39.384Z,1509687999.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:39.768Z,1509687999.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:39.783Z,1509687999.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:46:39.785Z,1509687999.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:40.171Z,1509688000.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:40.185Z,1509688000.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:46:40.186Z,1509688000.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:40.581Z,1509688000.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:40.612Z,1509688000.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:46:40.613Z,1509688000.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:40.985Z,1509688000.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:41.011Z,1509688001.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:46:41.012Z,1509688001.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:41.385Z,1509688001.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:41.418Z,1509688001.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:46:41.419Z,1509688001.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:41.769Z,1509688001.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:41.783Z,1509688001.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:46:41.785Z,1509688001.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:42.168Z,1509688002.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:42.183Z,1509688002.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:46:42.184Z,1509688002.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:42.572Z,1509688002.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:42.587Z,1509688002.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:46:42.588Z,1509688002.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:42.985Z,1509688002.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:43.006Z,1509688003.006 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:46:43.043Z,1509688003.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T05:46:43.069Z,1509688003.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:43.131Z,1509688003.131 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:46:43.132Z,1509688003.132 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:46:43.133Z,1509688003.133 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:46:43.134Z,1509688003.134 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:46:43.387Z,1509688003.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:43.431Z,1509688003.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:46:43.432Z,1509688003.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:43.790Z,1509688003.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:43.812Z,1509688003.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:44.199Z,1509688004.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:44.215Z,1509688004.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:44.586Z,1509688004.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:44.615Z,1509688004.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:44.967Z,1509688004.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:44.987Z,1509688004.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:45.369Z,1509688005.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:45.384Z,1509688005.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:45.772Z,1509688005.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:45.788Z,1509688005.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:46.169Z,1509688006.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:46.185Z,1509688006.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:46.582Z,1509688006.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:46.612Z,1509688006.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:46.985Z,1509688006.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:47.001Z,1509688007.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:47.385Z,1509688007.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:47.419Z,1509688007.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:47.419Z,1509688007.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 111
2017-11-03T05:46:47.419Z,1509688007.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:46:47.421Z,1509688007.421 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:47.421Z,1509688007.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 111
2017-11-03T05:46:47.421Z,1509688007.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:46:47.423Z,1509688007.423 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:47.423Z,1509688007.423 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111
2017-11-03T05:46:47.423Z,1509688007.423 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:46:47.508Z,1509688007.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:46:47.509Z,1509688007.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:46:47.509Z,1509688007.509 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:46:47.771Z,1509688007.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:47.876Z,1509688007.876 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:46:47.876Z,1509688007.876 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 111
2017-11-03T05:46:47.877Z,1509688007.877 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:46:47.877Z,1509688007.877 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 111
2017-11-03T05:46:47.877Z,1509688007.877 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:46:47.878Z,1509688007.878 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111
2017-11-03T05:46:48.162Z,1509688008.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:48.201Z,1509688008.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:46:48.202Z,1509688008.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:46:48.202Z,1509688008.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:46:48.203Z,1509688008.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:46:48.203Z,1509688008.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:46:48.203Z,1509688008.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:46:48.204Z,1509688008.204 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:46:48.204Z,1509688008.204 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:46:48.205Z,1509688008.205 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:46:48.569Z,1509688008.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:48.590Z,1509688008.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:49.027Z,1509688009.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:49.128Z,1509688009.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:49.368Z,1509688009.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:49.383Z,1509688009.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:49.781Z,1509688009.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:49.826Z,1509688009.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:50.185Z,1509688010.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:50.231Z,1509688010.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:50.581Z,1509688010.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:50.596Z,1509688010.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:50.969Z,1509688010.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:50.991Z,1509688010.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:51.368Z,1509688011.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:51.384Z,1509688011.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:51.772Z,1509688011.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:51.787Z,1509688011.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:52.169Z,1509688012.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:52.191Z,1509688012.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:52.597Z,1509688012.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:52.613Z,1509688012.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:52.981Z,1509688012.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:52.997Z,1509688012.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:53.382Z,1509688013.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:53.451Z,1509688013.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:53.771Z,1509688013.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:53.791Z,1509688013.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:54.171Z,1509688014.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:54.191Z,1509688014.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:54.572Z,1509688014.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:54.587Z,1509688014.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:54.969Z,1509688014.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:54.991Z,1509688014.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:55.371Z,1509688015.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:55.391Z,1509688015.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:55.781Z,1509688015.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:55.797Z,1509688015.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:56.204Z,1509688016.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:56.231Z,1509688016.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:56.577Z,1509688016.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:56.599Z,1509688016.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:56.969Z,1509688016.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:56.984Z,1509688016.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:57.367Z,1509688017.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:57.391Z,1509688017.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:57.768Z,1509688017.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:57.795Z,1509688017.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:58.167Z,1509688018.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:58.187Z,1509688018.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:58.574Z,1509688018.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:58.594Z,1509688018.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:58.987Z,1509688018.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:59.006Z,1509688019.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:59.432Z,1509688019.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:59.460Z,1509688019.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:46:59.767Z,1509688019.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:46:59.793Z,1509688019.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:00.168Z,1509688020.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:00.194Z,1509688020.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:00.571Z,1509688020.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:00.598Z,1509688020.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:00.972Z,1509688020.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:00.997Z,1509688020.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:01.440Z,1509688021.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:01.465Z,1509688021.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:01.790Z,1509688021.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:01.806Z,1509688021.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:02.193Z,1509688022.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:02.280Z,1509688022.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:02.585Z,1509688022.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:02.610Z,1509688022.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:02.972Z,1509688022.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:02.987Z,1509688022.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:03.431Z,1509688023.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:03.791Z,1509688023.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:04.227Z,1509688024.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:04.586Z,1509688024.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:04.610Z,1509688024.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:04.982Z,1509688024.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:05.030Z,1509688025.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:05.386Z,1509688025.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:05.410Z,1509688025.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:05.769Z,1509688025.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:05.791Z,1509688025.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:06.169Z,1509688026.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:06.185Z,1509688026.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:06.577Z,1509688026.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:06.592Z,1509688026.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:06.981Z,1509688026.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:06.996Z,1509688026.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:07.372Z,1509688027.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:07.395Z,1509688027.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:07.778Z,1509688027.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:07.794Z,1509688027.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:08.199Z,1509688028.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:08.618Z,1509688028.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:09.019Z,1509688029.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:09.395Z,1509688029.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:09.791Z,1509688029.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:10.194Z,1509688030.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:10.597Z,1509688030.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:10.997Z,1509688030.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:11.406Z,1509688031.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:11.793Z,1509688031.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:12.193Z,1509688032.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:12.594Z,1509688032.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:12.997Z,1509688032.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:13.472Z,1509688033.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:13.814Z,1509688033.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:14.204Z,1509688034.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:14.605Z,1509688034.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:14.995Z,1509688034.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:15.455Z,1509688035.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:15.794Z,1509688035.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:16.198Z,1509688036.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:16.654Z,1509688036.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:17.051Z,1509688037.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:17.409Z,1509688037.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:17.823Z,1509688037.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:18.200Z,1509688038.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:18.618Z,1509688038.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:19.001Z,1509688039.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:19.415Z,1509688039.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:19.804Z,1509688039.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:20.207Z,1509688040.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:20.607Z,1509688040.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:21.007Z,1509688041.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:21.401Z,1509688041.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:21.807Z,1509688041.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:22.201Z,1509688042.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:22.605Z,1509688042.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:23.009Z,1509688043.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:23.408Z,1509688043.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:23.801Z,1509688043.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:24.219Z,1509688044.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:24.602Z,1509688044.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:25.001Z,1509688045.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:25.400Z,1509688045.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:25.802Z,1509688045.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:26.190Z,1509688046.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:26.205Z,1509688046.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:26.589Z,1509688046.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:26.604Z,1509688046.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:26.971Z,1509688046.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:27.002Z,1509688047.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:27.410Z,1509688047.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:27.452Z,1509688047.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:27.771Z,1509688047.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:27.802Z,1509688047.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:28.168Z,1509688048.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:28.202Z,1509688048.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:28.589Z,1509688048.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:28.605Z,1509688048.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:28.989Z,1509688048.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:29.005Z,1509688049.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:29.405Z,1509688049.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:29.455Z,1509688049.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:32.578Z,1509688052.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:32.627Z,1509688052.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:32.765Z,1509688052.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:32.802Z,1509688052.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:33.172Z,1509688053.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:33.188Z,1509688053.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:33.577Z,1509688053.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:33.626Z,1509688053.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:33.972Z,1509688053.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:33.995Z,1509688053.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:34.367Z,1509688054.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:34.411Z,1509688054.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:34.761Z,1509688054.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:34.818Z,1509688054.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:35.164Z,1509688055.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:35.179Z,1509688055.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:35.576Z,1509688055.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:35.598Z,1509688055.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:35.975Z,1509688055.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:35.995Z,1509688055.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:36.375Z,1509688056.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:36.399Z,1509688056.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:36.762Z,1509688056.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:36.777Z,1509688056.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:37.158Z,1509688057.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:37.187Z,1509688057.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:37.564Z,1509688057.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:37.586Z,1509688057.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:37.953Z,1509688057.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:37.979Z,1509688057.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:38.352Z,1509688058.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:38.378Z,1509688058.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:38.777Z,1509688058.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:38.792Z,1509688058.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:39.197Z,1509688059.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:39.224Z,1509688059.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:39.574Z,1509688059.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:39.595Z,1509688059.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:39.955Z,1509688059.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:39.981Z,1509688059.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:40.353Z,1509688060.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:40.387Z,1509688060.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:40.767Z,1509688060.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:40.783Z,1509688060.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:41.167Z,1509688061.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:41.183Z,1509688061.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:41.573Z,1509688061.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:41.588Z,1509688061.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:41.977Z,1509688061.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:41.992Z,1509688061.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:42.377Z,1509688062.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:42.392Z,1509688062.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:42.767Z,1509688062.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:42.783Z,1509688062.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:43.155Z,1509688063.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:43.181Z,1509688063.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:43.555Z,1509688063.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:43.581Z,1509688063.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:43.968Z,1509688063.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:43.983Z,1509688063.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:44.365Z,1509688064.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:44.381Z,1509688064.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:44.777Z,1509688064.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:44.792Z,1509688064.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:45.177Z,1509688065.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:45.242Z,1509688065.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:45.569Z,1509688065.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:45.599Z,1509688065.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:45.959Z,1509688065.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:45.990Z,1509688065.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:46.359Z,1509688066.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:46.393Z,1509688066.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:46.760Z,1509688066.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:46.866Z,1509688066.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:47.159Z,1509688067.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:47.190Z,1509688067.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:47.579Z,1509688067.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:47.598Z,1509688067.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:47.979Z,1509688067.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:48.040Z,1509688068.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:48.369Z,1509688068.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:48.391Z,1509688068.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:48.759Z,1509688068.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T05:47:48.817Z,1509688068.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:49.211Z,1509688069.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:49.579Z,1509688069.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:49.974Z,1509688069.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:50.375Z,1509688070.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:50.802Z,1509688070.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:51.186Z,1509688071.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:51.585Z,1509688071.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:51.977Z,1509688071.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:52.375Z,1509688072.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:52.783Z,1509688072.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:53.207Z,1509688073.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:53.585Z,1509688073.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:54.002Z,1509688074.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:54.384Z,1509688074.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:54.787Z,1509688074.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:55.179Z,1509688075.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:55.577Z,1509688075.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:55.980Z,1509688075.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:56.383Z,1509688076.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:56.784Z,1509688076.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:57.205Z,1509688077.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:57.605Z,1509688077.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:57.980Z,1509688077.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:58.381Z,1509688078.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:58.779Z,1509688078.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:59.179Z,1509688079.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:47:59.599Z,1509688079.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:00.040Z,1509688080.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:00.392Z,1509688080.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:00.781Z,1509688080.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:01.213Z,1509688081.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:01.595Z,1509688081.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:01.972Z,1509688081.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:02.407Z,1509688082.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:02.799Z,1509688082.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:03.222Z,1509688083.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:03.619Z,1509688083.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:03.981Z,1509688083.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:04.381Z,1509688084.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:04.779Z,1509688084.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:05.187Z,1509688085.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:05.585Z,1509688085.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:05.988Z,1509688085.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:06.387Z,1509688086.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:06.783Z,1509688086.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:07.184Z,1509688087.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:07.579Z,1509688087.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:07.983Z,1509688087.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:08.379Z,1509688088.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:08.787Z,1509688088.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:09.188Z,1509688089.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:09.583Z,1509688089.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:09.979Z,1509688089.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:10.380Z,1509688090.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:10.782Z,1509688090.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:11.179Z,1509688091.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:11.595Z,1509688091.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:11.991Z,1509688091.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:12.391Z,1509688092.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:12.782Z,1509688092.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:13.184Z,1509688093.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:13.583Z,1509688093.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:13.982Z,1509688093.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:14.407Z,1509688094.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:14.792Z,1509688094.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:15.195Z,1509688095.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:15.623Z,1509688095.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:15.971Z,1509688095.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:16.397Z,1509688096.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:16.811Z,1509688096.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:17.176Z,1509688097.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:17.615Z,1509688097.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:18.027Z,1509688098.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:18.384Z,1509688098.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:18.778Z,1509688098.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:19.179Z,1509688099.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:19.579Z,1509688099.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:19.978Z,1509688099.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:20.379Z,1509688100.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:20.808Z,1509688100.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:21.185Z,1509688101.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:21.580Z,1509688101.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:21.979Z,1509688101.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:22.380Z,1509688102.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:22.779Z,1509688102.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:23.180Z,1509688103.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:23.590Z,1509688103.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:23.992Z,1509688103.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:24.384Z,1509688104.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:24.779Z,1509688104.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:25.179Z,1509688105.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:25.576Z,1509688105.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:25.980Z,1509688105.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:26.383Z,1509688106.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:26.785Z,1509688106.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:27.188Z,1509688107.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:27.591Z,1509688107.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:27.979Z,1509688107.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:28.382Z,1509688108.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:28.782Z,1509688108.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:29.207Z,1509688109.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:29.596Z,1509688109.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:32.803Z,1509688112.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:33.032Z,1509688113.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:33.390Z,1509688113.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:33.830Z,1509688113.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:34.187Z,1509688114.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:34.630Z,1509688114.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:35.035Z,1509688115.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:35.410Z,1509688115.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:35.798Z,1509688115.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:36.199Z,1509688116.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:36.591Z,1509688116.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:36.991Z,1509688116.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:37.466Z,1509688117.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:37.793Z,1509688117.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:38.192Z,1509688118.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:38.593Z,1509688118.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:38.987Z,1509688118.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:38.996Z,1509688118.996 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:48:38.996Z,1509688118.996 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T05:48:38.997Z,1509688118.997 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:48:39.076Z,1509688119.076 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:48:39.401Z,1509688119.401 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:48:39.536Z,1509688119.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T05:48:39.537Z,1509688119.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:39.578Z,1509688119.578 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:48:39.790Z,1509688119.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T05:48:39.791Z,1509688119.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:40.187Z,1509688120.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:48:40.189Z,1509688120.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:40.596Z,1509688120.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:48:40.597Z,1509688120.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:40.996Z,1509688120.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:48:40.997Z,1509688120.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:41.101Z,1509688121.101 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T05:48:41.101Z,1509688121.101 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T05:48:41.196Z,1509688121.196 [Rowe_600LCM](INFO): Initializing
2017-11-03T05:48:41.197Z,1509688121.197 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T05:48:41.197Z,1509688121.197 [Rowe_600LCM](INFO): LCM OK
2017-11-03T05:48:41.197Z,1509688121.197 [Rowe_600LCM](INFO): Powering up
2017-11-03T05:48:41.398Z,1509688121.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:48:41.399Z,1509688121.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:41.789Z,1509688121.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:48:41.790Z,1509688121.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:42.193Z,1509688122.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:48:42.194Z,1509688122.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:42.587Z,1509688122.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:48:42.588Z,1509688122.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:42.990Z,1509688122.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:48:42.991Z,1509688122.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:43.389Z,1509688123.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:48:43.390Z,1509688123.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:43.793Z,1509688123.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:48:43.794Z,1509688123.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:44.202Z,1509688124.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:48:44.203Z,1509688124.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:44.592Z,1509688124.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:48:44.593Z,1509688124.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:44.987Z,1509688124.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:48:44.988Z,1509688124.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:45.322Z,1509688125.322 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T05:48:45.439Z,1509688125.439 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T05:48:45.440Z,1509688125.440 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T05:48:45.441Z,1509688125.441 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T05:48:45.441Z,1509688125.441 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T05:48:45.448Z,1509688125.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T05:48:45.449Z,1509688125.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:45.824Z,1509688125.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:48:45.829Z,1509688125.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:46.261Z,1509688126.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:46.611Z,1509688126.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:47.035Z,1509688127.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:47.404Z,1509688127.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:47.806Z,1509688127.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:48.182Z,1509688128.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:48.627Z,1509688128.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:49.009Z,1509688129.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:49.427Z,1509688129.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:49.805Z,1509688129.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:50.205Z,1509688130.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:50.605Z,1509688130.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:51.007Z,1509688131.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:51.384Z,1509688131.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:51.808Z,1509688131.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:52.207Z,1509688132.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:52.606Z,1509688132.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:53.010Z,1509688133.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:53.405Z,1509688133.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:53.783Z,1509688133.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:54.207Z,1509688134.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:54.584Z,1509688134.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:55.007Z,1509688135.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:55.409Z,1509688135.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:55.805Z,1509688135.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:56.205Z,1509688136.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:56.608Z,1509688136.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:57.011Z,1509688137.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:57.381Z,1509688137.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:57.791Z,1509688137.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:58.187Z,1509688138.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:58.610Z,1509688138.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:59.008Z,1509688139.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:59.406Z,1509688139.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:48:59.827Z,1509688139.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:00.188Z,1509688140.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:00.590Z,1509688140.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:00.995Z,1509688140.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:01.443Z,1509688141.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:01.807Z,1509688141.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:02.201Z,1509688142.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:02.606Z,1509688142.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:02.999Z,1509688142.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:03.457Z,1509688143.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:03.787Z,1509688143.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:04.190Z,1509688144.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:04.594Z,1509688144.594 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:49:04.594Z,1509688144.594 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:49:04.595Z,1509688144.595 [BPC1](ERROR): Communications Fault
2017-11-03T05:49:04.603Z,1509688144.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:04.718Z,1509688144.718 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:49:04.997Z,1509688144.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:05.401Z,1509688145.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:05.791Z,1509688145.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:05.881Z,1509688145.881 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:49:05.881Z,1509688145.881 [BPC1] No Fault, FailCount= 1
2017-11-03T05:49:06.247Z,1509688146.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:06.595Z,1509688146.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:06.988Z,1509688146.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:07.390Z,1509688147.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:07.800Z,1509688147.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:08.200Z,1509688148.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:08.600Z,1509688148.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:08.987Z,1509688148.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:09.390Z,1509688149.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:09.791Z,1509688149.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:10.220Z,1509688150.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:10.603Z,1509688150.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:11.009Z,1509688151.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:11.400Z,1509688151.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:11.791Z,1509688151.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:12.190Z,1509688152.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:12.597Z,1509688152.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:12.999Z,1509688152.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:13.383Z,1509688153.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:13.801Z,1509688153.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:14.206Z,1509688154.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:14.599Z,1509688154.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:14.996Z,1509688154.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:15.459Z,1509688155.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:15.795Z,1509688155.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:16.190Z,1509688156.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:16.611Z,1509688156.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:17.003Z,1509688157.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:17.463Z,1509688157.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:17.791Z,1509688157.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:18.195Z,1509688158.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:18.589Z,1509688158.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:18.996Z,1509688158.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:19.395Z,1509688159.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:19.801Z,1509688159.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:20.207Z,1509688160.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:20.664Z,1509688160.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:21.003Z,1509688161.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:21.428Z,1509688161.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:21.799Z,1509688161.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:22.224Z,1509688162.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:22.601Z,1509688162.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:23.035Z,1509688163.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:23.401Z,1509688163.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:23.790Z,1509688163.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:24.199Z,1509688164.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:24.599Z,1509688164.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:25.011Z,1509688165.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:25.392Z,1509688165.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:25.830Z,1509688165.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:26.202Z,1509688166.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:26.600Z,1509688166.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:26.999Z,1509688166.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:27.393Z,1509688167.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:27.792Z,1509688167.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:28.191Z,1509688168.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:28.601Z,1509688168.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:29.005Z,1509688169.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:29.438Z,1509688169.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:29.794Z,1509688169.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:33.136Z,1509688173.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:33.319Z,1509688173.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:33.754Z,1509688173.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:34.103Z,1509688174.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:34.545Z,1509688174.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:34.919Z,1509688174.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:35.319Z,1509688175.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:35.669Z,1509688175.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x16216 got:0x59933
2017-11-03T05:49:35.720Z,1509688175.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:36.077Z,1509688176.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:36.510Z,1509688176.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:36.946Z,1509688176.946 [PNI_TCM](ERROR): CRC does not match. Expected:0x19487 got:0x57472
2017-11-03T05:49:36.970Z,1509688176.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:37.303Z,1509688177.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:37.678Z,1509688177.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:38.098Z,1509688178.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:38.502Z,1509688178.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:38.947Z,1509688178.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:39.279Z,1509688179.279 [PNI_TCM](ERROR): CRC does not match. Expected:0x5967 got:0x27
2017-11-03T05:49:39.319Z,1509688179.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:39.702Z,1509688179.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:40.094Z,1509688180.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:40.495Z,1509688180.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:40.888Z,1509688180.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:41.298Z,1509688181.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:41.678Z,1509688181.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x47643 got:0x16910
2017-11-03T05:49:41.719Z,1509688181.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:42.091Z,1509688182.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:42.493Z,1509688182.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:42.894Z,1509688182.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:43.298Z,1509688183.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:43.682Z,1509688183.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:44.087Z,1509688184.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:44.514Z,1509688184.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:44.881Z,1509688184.881 [PNI_TCM](ERROR): CRC does not match. Expected:0x20908 got:0x57280
2017-11-03T05:49:44.919Z,1509688184.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:45.290Z,1509688185.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:45.724Z,1509688185.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:46.141Z,1509688186.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:46.542Z,1509688186.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:46.935Z,1509688186.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:47.321Z,1509688187.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:47.706Z,1509688187.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:48.083Z,1509688188.083 [PNI_TCM](ERROR): CRC does not match. Expected:0x25263 got:0x49817
2017-11-03T05:49:48.138Z,1509688188.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:48.534Z,1509688188.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:48.534Z,1509688188.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 112
2017-11-03T05:49:48.534Z,1509688188.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:49:48.536Z,1509688188.536 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:48.536Z,1509688188.536 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 112
2017-11-03T05:49:48.536Z,1509688188.536 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:49:48.538Z,1509688188.538 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:48.538Z,1509688188.538 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112
2017-11-03T05:49:48.538Z,1509688188.538 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:49:48.625Z,1509688188.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:49:48.625Z,1509688188.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:49:48.625Z,1509688188.625 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:49:49.036Z,1509688189.036 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:49:49.036Z,1509688189.036 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 112
2017-11-03T05:49:49.037Z,1509688189.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:49:49.037Z,1509688189.037 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 112
2017-11-03T05:49:49.037Z,1509688189.037 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:49:49.037Z,1509688189.037 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112
2017-11-03T05:49:49.310Z,1509688189.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:49:49.310Z,1509688189.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:49:49.310Z,1509688189.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:49:49.311Z,1509688189.311 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:49:49.311Z,1509688189.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:49:49.311Z,1509688189.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:49:49.312Z,1509688189.312 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:49:49.333Z,1509688189.333 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:49:49.333Z,1509688189.333 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:49:49.691Z,1509688189.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:50.091Z,1509688190.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:50.489Z,1509688190.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:50.947Z,1509688190.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:51.291Z,1509688191.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:51.703Z,1509688191.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:52.107Z,1509688192.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:52.501Z,1509688192.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:52.949Z,1509688192.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:53.281Z,1509688193.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:53.727Z,1509688193.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:54.109Z,1509688194.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:54.487Z,1509688194.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:54.910Z,1509688194.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:55.310Z,1509688195.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:55.707Z,1509688195.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:56.083Z,1509688196.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:56.481Z,1509688196.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:56.885Z,1509688196.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:57.307Z,1509688197.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:57.691Z,1509688197.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:58.114Z,1509688198.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:58.496Z,1509688198.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:58.909Z,1509688198.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:59.277Z,1509688199.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x54065 got:0x49817
2017-11-03T05:49:59.313Z,1509688199.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:49:59.715Z,1509688199.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:00.088Z,1509688200.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:00.495Z,1509688200.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:00.970Z,1509688200.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:01.296Z,1509688201.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:01.718Z,1509688201.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:02.123Z,1509688202.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:02.481Z,1509688202.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x39382 got:0x16909
2017-11-03T05:50:02.499Z,1509688202.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:02.937Z,1509688202.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:03.287Z,1509688203.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:03.695Z,1509688203.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:04.094Z,1509688204.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:04.497Z,1509688204.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:04.930Z,1509688204.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:05.310Z,1509688205.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:05.681Z,1509688205.681 [PNI_TCM](ERROR): CRC does not match. Expected:0x43571 got:0x57344
2017-11-03T05:50:05.714Z,1509688205.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:06.091Z,1509688206.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:06.492Z,1509688206.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:06.949Z,1509688206.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:07.322Z,1509688207.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:07.686Z,1509688207.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:08.092Z,1509688208.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:08.494Z,1509688208.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:08.896Z,1509688208.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:09.290Z,1509688209.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:09.703Z,1509688209.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:10.099Z,1509688210.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:10.507Z,1509688210.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:10.891Z,1509688210.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:11.295Z,1509688211.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:11.696Z,1509688211.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:12.081Z,1509688212.081 [PNI_TCM](ERROR): CRC does not match. Expected:0x6635 got:0x39365
2017-11-03T05:50:12.142Z,1509688212.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:12.498Z,1509688212.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:12.907Z,1509688212.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:13.310Z,1509688213.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:13.705Z,1509688213.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:14.113Z,1509688214.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:14.482Z,1509688214.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:14.954Z,1509688214.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:15.282Z,1509688215.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:15.724Z,1509688215.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:16.131Z,1509688216.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:16.511Z,1509688216.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:16.900Z,1509688216.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x35451 got:0x57408
2017-11-03T05:50:16.929Z,1509688216.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:17.287Z,1509688217.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:17.684Z,1509688217.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:18.105Z,1509688218.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:18.507Z,1509688218.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:18.937Z,1509688218.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:19.310Z,1509688219.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:19.707Z,1509688219.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:20.083Z,1509688220.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:20.486Z,1509688220.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:20.965Z,1509688220.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:21.309Z,1509688221.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:21.711Z,1509688221.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:22.111Z,1509688222.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:22.511Z,1509688222.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:22.907Z,1509688222.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:23.308Z,1509688223.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:23.682Z,1509688223.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:24.083Z,1509688224.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:24.510Z,1509688224.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:24.911Z,1509688224.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:25.310Z,1509688225.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:25.695Z,1509688225.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:26.112Z,1509688226.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:26.477Z,1509688226.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x32290 got:0x39365
2017-11-03T05:50:26.516Z,1509688226.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:26.930Z,1509688226.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:27.287Z,1509688227.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:27.698Z,1509688227.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:28.148Z,1509688228.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:28.497Z,1509688228.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:28.943Z,1509688228.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:28.946Z,1509688228.946 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T05:45:28.9Z
2017-11-03T05:50:28.946Z,1509688228.946 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T05:50:28.946Z,1509688228.946 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T05:50:29.302Z,1509688229.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:29.789Z,1509688229.789 [PNI_TCM](ERROR): CRC does not match. Expected:0x33809 got:0x39364
2017-11-03T05:50:29.846Z,1509688229.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:30.091Z,1509688230.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:33.434Z,1509688233.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:33.528Z,1509688233.528 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171103T001125/Courier0132.lzma
2017-11-03T05:50:33.620Z,1509688233.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:33.985Z,1509688233.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:34.331Z,1509688234.331 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0132.lzma.bak
2017-11-03T05:50:34.331Z,1509688234.331 [DataOverHttps](INFO): SBD MOMSN=5182844
2017-11-03T05:50:34.387Z,1509688234.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:35.071Z,1509688235.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:35.256Z,1509688235.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:38.432Z,1509688238.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:38.599Z,1509688238.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:38.997Z,1509688238.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:39.483Z,1509688239.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:39.795Z,1509688239.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:40.201Z,1509688240.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:41.465Z,1509688241.465 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T05:50:41.465Z,1509688241.465 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T05:50:41.465Z,1509688241.465 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T05:50:41.868Z,1509688241.868 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T05:50:42.014Z,1509688242.014 [Rowe_600LCM](INFO): Powering down
2017-11-03T05:50:43.525Z,1509688243.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-03T05:50:43.526Z,1509688243.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:43.633Z,1509688243.633 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T05:50:43.633Z,1509688243.633 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T05:50:43.649Z,1509688243.649 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171103T001125/Express0133.lzma
2017-11-03T05:50:43.715Z,1509688243.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T05:50:43.716Z,1509688243.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:44.110Z,1509688244.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T05:50:44.111Z,1509688244.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:44.448Z,1509688244.448 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0133.lzma.bak
2017-11-03T05:50:44.449Z,1509688244.449 [DataOverHttps](INFO): SBD MOMSN=5182847
2017-11-03T05:50:44.551Z,1509688244.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T05:50:44.552Z,1509688244.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:45.102Z,1509688245.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T05:50:45.103Z,1509688245.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:45.107Z,1509688245.107 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T05:50:45.107Z,1509688245.107 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T05:50:45.107Z,1509688245.107 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T05:50:45.300Z,1509688245.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T05:50:45.301Z,1509688245.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:48.460Z,1509688248.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-03T05:50:48.461Z,1509688248.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:48.650Z,1509688248.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:50:48.651Z,1509688248.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:49.085Z,1509688249.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T05:50:49.086Z,1509688249.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:49.439Z,1509688249.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:50:49.440Z,1509688249.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:49.870Z,1509688249.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T05:50:49.871Z,1509688249.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:50.244Z,1509688250.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:50:50.245Z,1509688250.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:50.675Z,1509688250.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T05:50:50.676Z,1509688250.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:51.054Z,1509688251.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T05:50:51.055Z,1509688251.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:51.448Z,1509688251.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:50:51.449Z,1509688251.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:51.823Z,1509688251.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:50:51.824Z,1509688251.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:52.244Z,1509688252.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:50:52.249Z,1509688252.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:52.628Z,1509688252.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T05:50:52.645Z,1509688252.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:53.026Z,1509688253.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T05:50:53.027Z,1509688253.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:53.454Z,1509688253.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T05:50:53.455Z,1509688253.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:53.854Z,1509688253.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T05:50:53.855Z,1509688253.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:54.249Z,1509688254.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T05:50:54.250Z,1509688254.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:54.628Z,1509688254.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T05:50:54.645Z,1509688254.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:55.027Z,1509688255.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T05:50:55.028Z,1509688255.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:55.449Z,1509688255.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T05:50:55.450Z,1509688255.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:55.854Z,1509688255.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T05:50:55.855Z,1509688255.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:56.247Z,1509688256.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:50:56.248Z,1509688256.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:56.625Z,1509688256.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:50:56.626Z,1509688256.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:57.028Z,1509688257.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T05:50:57.045Z,1509688257.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:57.450Z,1509688257.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:50:57.451Z,1509688257.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:57.851Z,1509688257.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T05:50:57.852Z,1509688257.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:58.247Z,1509688258.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:50:58.249Z,1509688258.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:58.643Z,1509688258.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T05:50:58.644Z,1509688258.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:59.024Z,1509688259.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T05:50:59.025Z,1509688259.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:59.457Z,1509688259.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T05:50:59.458Z,1509688259.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:50:59.854Z,1509688259.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T05:50:59.855Z,1509688259.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:00.251Z,1509688260.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:00.629Z,1509688260.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:01.043Z,1509688261.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:01.500Z,1509688261.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:01.859Z,1509688261.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:02.275Z,1509688262.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:02.628Z,1509688262.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:03.070Z,1509688263.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:03.467Z,1509688263.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:03.879Z,1509688263.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:04.287Z,1509688264.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:04.641Z,1509688264.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:05.066Z,1509688265.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:05.488Z,1509688265.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:05.875Z,1509688265.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:06.269Z,1509688266.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:06.650Z,1509688266.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:07.043Z,1509688267.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:07.444Z,1509688267.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:07.851Z,1509688267.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:08.260Z,1509688268.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:08.671Z,1509688268.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:09.047Z,1509688269.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:09.455Z,1509688269.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:09.862Z,1509688269.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:10.263Z,1509688270.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:10.653Z,1509688270.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:11.098Z,1509688271.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:11.503Z,1509688271.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:11.867Z,1509688271.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:12.269Z,1509688272.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:12.647Z,1509688272.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:13.066Z,1509688273.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:13.464Z,1509688273.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:13.867Z,1509688273.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:14.265Z,1509688274.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:14.660Z,1509688274.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:15.091Z,1509688275.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:15.465Z,1509688275.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:15.858Z,1509688275.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:16.263Z,1509688276.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:16.683Z,1509688276.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:17.102Z,1509688277.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:17.459Z,1509688277.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:17.883Z,1509688277.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:18.250Z,1509688278.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:18.677Z,1509688278.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:19.072Z,1509688279.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:19.451Z,1509688279.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:19.855Z,1509688279.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:20.247Z,1509688280.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:20.637Z,1509688280.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:21.037Z,1509688281.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:21.448Z,1509688281.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:21.843Z,1509688281.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:22.279Z,1509688282.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:22.636Z,1509688282.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:23.043Z,1509688283.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:23.447Z,1509688283.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:23.847Z,1509688283.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:24.250Z,1509688284.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:24.643Z,1509688284.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:25.047Z,1509688285.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:25.447Z,1509688285.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:25.855Z,1509688285.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:26.247Z,1509688286.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:26.634Z,1509688286.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:27.039Z,1509688287.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:27.459Z,1509688287.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:27.848Z,1509688287.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:28.247Z,1509688288.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:28.637Z,1509688288.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:29.039Z,1509688289.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:29.448Z,1509688289.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:29.899Z,1509688289.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:30.256Z,1509688290.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:30.640Z,1509688290.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:31.039Z,1509688291.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:31.463Z,1509688291.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:31.847Z,1509688291.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:32.285Z,1509688292.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:32.651Z,1509688292.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:33.071Z,1509688293.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:33.510Z,1509688293.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:33.851Z,1509688293.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:34.248Z,1509688294.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:34.638Z,1509688294.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:35.039Z,1509688295.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:35.448Z,1509688295.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:35.848Z,1509688295.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:36.250Z,1509688296.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:36.639Z,1509688296.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:37.040Z,1509688297.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:37.449Z,1509688297.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:37.854Z,1509688297.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:38.249Z,1509688298.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:38.642Z,1509688298.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:39.042Z,1509688299.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:39.455Z,1509688299.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:39.859Z,1509688299.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:40.251Z,1509688300.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:40.640Z,1509688300.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:41.041Z,1509688301.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:41.455Z,1509688301.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:41.850Z,1509688301.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:42.250Z,1509688302.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:42.642Z,1509688302.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:43.039Z,1509688303.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:43.459Z,1509688303.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:43.859Z,1509688303.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:44.250Z,1509688304.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:44.640Z,1509688304.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:45.040Z,1509688305.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:45.495Z,1509688305.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:45.875Z,1509688305.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:48.945Z,1509688308.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:49.037Z,1509688309.037 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T05:51:49.104Z,1509688309.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:49.543Z,1509688309.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:49.901Z,1509688309.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:50.319Z,1509688310.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:50.747Z,1509688310.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:51.107Z,1509688311.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:51.515Z,1509688311.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:51.901Z,1509688311.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:52.303Z,1509688312.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:52.699Z,1509688312.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:53.098Z,1509688313.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:53.508Z,1509688313.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:53.907Z,1509688313.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:54.314Z,1509688314.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:54.703Z,1509688314.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:55.100Z,1509688315.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:55.501Z,1509688315.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:55.899Z,1509688315.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:56.301Z,1509688316.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:56.708Z,1509688316.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:57.119Z,1509688317.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:57.508Z,1509688317.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:57.906Z,1509688317.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:58.302Z,1509688318.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:58.699Z,1509688318.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:59.101Z,1509688319.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:59.509Z,1509688319.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:51:59.908Z,1509688319.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:00.318Z,1509688320.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:00.703Z,1509688320.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:01.100Z,1509688321.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:01.499Z,1509688321.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:01.903Z,1509688321.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:02.303Z,1509688322.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:02.781Z,1509688322.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:03.107Z,1509688323.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:03.545Z,1509688323.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:03.905Z,1509688323.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:04.322Z,1509688324.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:04.712Z,1509688324.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:05.107Z,1509688325.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:05.509Z,1509688325.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:05.909Z,1509688325.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:06.309Z,1509688326.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:06.706Z,1509688326.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:07.103Z,1509688327.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:07.487Z,1509688327.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:07.908Z,1509688327.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:08.287Z,1509688328.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:08.719Z,1509688328.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:09.119Z,1509688329.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:09.515Z,1509688329.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:09.911Z,1509688329.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:10.308Z,1509688330.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:10.688Z,1509688330.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:11.109Z,1509688331.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:11.515Z,1509688331.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:11.909Z,1509688331.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:12.311Z,1509688332.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:12.687Z,1509688332.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:13.105Z,1509688333.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:13.498Z,1509688333.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:13.909Z,1509688333.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:14.306Z,1509688334.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:14.710Z,1509688334.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:15.108Z,1509688335.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:15.507Z,1509688335.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:15.888Z,1509688335.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:16.287Z,1509688336.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:16.727Z,1509688336.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:17.130Z,1509688337.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:17.509Z,1509688337.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:17.919Z,1509688337.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:18.343Z,1509688338.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:18.687Z,1509688338.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:19.122Z,1509688339.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:19.530Z,1509688339.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:19.911Z,1509688339.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:20.288Z,1509688340.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:20.715Z,1509688340.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:21.109Z,1509688341.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:21.509Z,1509688341.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:21.887Z,1509688341.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:22.288Z,1509688342.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:22.688Z,1509688342.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:23.090Z,1509688343.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:23.511Z,1509688343.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:23.923Z,1509688343.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:24.311Z,1509688344.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:24.687Z,1509688344.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:25.088Z,1509688345.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:25.487Z,1509688345.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:25.889Z,1509688345.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:26.289Z,1509688346.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:26.711Z,1509688346.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:27.123Z,1509688347.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:27.510Z,1509688347.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:27.913Z,1509688347.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:28.287Z,1509688348.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:28.715Z,1509688348.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:29.086Z,1509688349.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:29.509Z,1509688349.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:29.909Z,1509688349.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:30.310Z,1509688350.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:30.686Z,1509688350.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:31.131Z,1509688351.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:31.535Z,1509688351.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:31.887Z,1509688351.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:32.335Z,1509688352.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:32.716Z,1509688352.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:33.135Z,1509688353.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:33.535Z,1509688353.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:33.893Z,1509688353.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:34.287Z,1509688354.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:34.688Z,1509688354.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:35.093Z,1509688355.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:35.515Z,1509688355.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:35.915Z,1509688355.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:36.314Z,1509688356.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:36.687Z,1509688356.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:37.095Z,1509688357.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:37.485Z,1509688357.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:37.887Z,1509688357.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:38.315Z,1509688358.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:38.716Z,1509688358.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:39.115Z,1509688359.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:39.515Z,1509688359.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:39.886Z,1509688359.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:40.291Z,1509688360.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:40.687Z,1509688360.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:41.086Z,1509688361.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:41.515Z,1509688361.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:41.923Z,1509688361.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:42.322Z,1509688362.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:42.695Z,1509688362.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:43.086Z,1509688363.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:43.490Z,1509688363.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:43.895Z,1509688363.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:44.294Z,1509688364.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:44.722Z,1509688364.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:45.123Z,1509688365.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:45.578Z,1509688365.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:45.889Z,1509688365.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:49.035Z,1509688369.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:49.190Z,1509688369.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:49.610Z,1509688369.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:49.610Z,1509688369.610 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 113
2017-11-03T05:52:49.610Z,1509688369.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:52:49.612Z,1509688369.612 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:49.612Z,1509688369.612 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 113
2017-11-03T05:52:49.612Z,1509688369.612 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:52:49.614Z,1509688369.614 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:49.614Z,1509688369.614 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113
2017-11-03T05:52:49.614Z,1509688369.614 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:52:49.697Z,1509688369.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:52:49.697Z,1509688369.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:52:49.697Z,1509688369.697 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:52:50.110Z,1509688370.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:52:50.110Z,1509688370.110 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 113
2017-11-03T05:52:50.110Z,1509688370.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:52:50.110Z,1509688370.110 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 113
2017-11-03T05:52:50.111Z,1509688370.111 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:52:50.111Z,1509688370.111 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113
2017-11-03T05:52:50.381Z,1509688370.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:52:50.382Z,1509688370.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:52:50.382Z,1509688370.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:52:50.383Z,1509688370.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:52:50.383Z,1509688370.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:52:50.383Z,1509688370.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:52:50.384Z,1509688370.384 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:52:50.384Z,1509688370.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:52:50.385Z,1509688370.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:52:50.776Z,1509688370.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:52:50.777Z,1509688370.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:51.175Z,1509688371.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:52:51.176Z,1509688371.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:51.559Z,1509688371.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-03T05:52:51.560Z,1509688371.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:51.959Z,1509688371.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T05:52:51.960Z,1509688371.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:52.359Z,1509688372.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-11-03T05:52:52.360Z,1509688372.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:52.786Z,1509688372.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:52:52.787Z,1509688372.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:53.185Z,1509688373.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:52:53.186Z,1509688373.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:53.582Z,1509688373.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:52:53.583Z,1509688373.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:53.959Z,1509688373.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T05:52:53.959Z,1509688373.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:54.358Z,1509688374.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T05:52:54.359Z,1509688374.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:54.777Z,1509688374.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:52:54.778Z,1509688374.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:55.159Z,1509688375.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T05:52:55.159Z,1509688375.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:55.585Z,1509688375.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:52:55.586Z,1509688375.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:55.982Z,1509688375.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:52:55.983Z,1509688375.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:56.386Z,1509688376.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:52:56.387Z,1509688376.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:56.778Z,1509688376.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:52:56.779Z,1509688376.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:57.160Z,1509688377.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:52:57.177Z,1509688377.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:57.559Z,1509688377.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-03T05:52:57.560Z,1509688377.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:57.978Z,1509688377.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:52:57.979Z,1509688377.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:58.378Z,1509688378.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T05:52:58.379Z,1509688378.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:58.779Z,1509688378.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:52:58.780Z,1509688378.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:59.186Z,1509688379.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T05:52:59.186Z,1509688379.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:59.579Z,1509688379.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:52:59.580Z,1509688379.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:52:59.959Z,1509688379.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-03T05:52:59.959Z,1509688379.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:00.358Z,1509688380.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-03T05:53:00.359Z,1509688380.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:00.760Z,1509688380.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:53:00.777Z,1509688380.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:01.182Z,1509688381.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:53:01.183Z,1509688381.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:01.586Z,1509688381.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:53:01.587Z,1509688381.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:02.026Z,1509688382.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T05:53:02.027Z,1509688382.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:02.407Z,1509688382.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T05:53:02.408Z,1509688382.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:02.765Z,1509688382.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T05:53:02.766Z,1509688382.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:03.206Z,1509688383.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T05:53:03.207Z,1509688383.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:03.559Z,1509688383.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-03T05:53:03.559Z,1509688383.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:03.987Z,1509688383.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T05:53:03.987Z,1509688383.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:04.387Z,1509688384.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T05:53:04.387Z,1509688384.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:04.785Z,1509688384.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T05:53:04.786Z,1509688384.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:05.130Z,1509688385.130 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T05:53:05.130Z,1509688385.130 [NAL9602] Data Fault, FailCount= 1
2017-11-03T05:53:05.130Z,1509688385.130 [NAL9602](ERROR): Data Fault
2017-11-03T05:53:05.162Z,1509688385.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T05:53:05.163Z,1509688385.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:05.264Z,1509688385.264 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T05:53:05.527Z,1509688385.527 [NAL9602](INFO): Powering down
2017-11-03T05:53:05.566Z,1509688385.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:53:05.567Z,1509688385.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:05.963Z,1509688385.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:53:05.964Z,1509688385.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:06.362Z,1509688386.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T05:53:06.363Z,1509688386.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:06.470Z,1509688386.470 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T05:53:06.470Z,1509688386.470 [NAL9602] No Fault, FailCount= 1
2017-11-03T05:53:06.762Z,1509688386.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:53:06.763Z,1509688386.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:07.163Z,1509688387.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T05:53:07.165Z,1509688387.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:07.562Z,1509688387.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:53:07.563Z,1509688387.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:07.967Z,1509688387.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T05:53:07.968Z,1509688387.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:08.363Z,1509688388.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T05:53:08.364Z,1509688388.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:08.762Z,1509688388.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T05:53:08.763Z,1509688388.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:09.163Z,1509688389.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T05:53:09.164Z,1509688389.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:09.563Z,1509688389.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T05:53:09.564Z,1509688389.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:09.962Z,1509688389.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:10.363Z,1509688390.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:10.763Z,1509688390.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:11.162Z,1509688391.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:11.567Z,1509688391.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:11.964Z,1509688391.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:12.363Z,1509688392.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:12.763Z,1509688392.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:13.163Z,1509688393.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:13.562Z,1509688393.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:13.963Z,1509688393.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:14.363Z,1509688394.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:14.761Z,1509688394.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:15.162Z,1509688395.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:15.562Z,1509688395.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:16.031Z,1509688396.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:16.361Z,1509688396.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:16.762Z,1509688396.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:17.192Z,1509688397.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:17.561Z,1509688397.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:18.003Z,1509688398.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:18.391Z,1509688398.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:18.762Z,1509688398.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:19.166Z,1509688399.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:19.565Z,1509688399.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:19.967Z,1509688399.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:20.366Z,1509688400.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:20.762Z,1509688400.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:21.162Z,1509688401.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:21.566Z,1509688401.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:21.965Z,1509688401.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:22.362Z,1509688402.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:22.766Z,1509688402.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:23.162Z,1509688403.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:23.566Z,1509688403.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:23.966Z,1509688403.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:24.365Z,1509688404.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:24.762Z,1509688404.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:25.166Z,1509688405.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:25.566Z,1509688405.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:25.966Z,1509688405.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:26.366Z,1509688406.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:26.768Z,1509688406.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:27.177Z,1509688407.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:27.567Z,1509688407.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:27.968Z,1509688407.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:28.369Z,1509688408.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:28.767Z,1509688408.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:29.168Z,1509688409.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:29.569Z,1509688409.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:29.967Z,1509688409.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:30.442Z,1509688410.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:30.764Z,1509688410.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:31.206Z,1509688411.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:31.568Z,1509688411.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:32.003Z,1509688412.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:32.406Z,1509688412.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:32.771Z,1509688412.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:33.169Z,1509688413.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:33.567Z,1509688413.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:33.968Z,1509688413.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:34.369Z,1509688414.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:34.767Z,1509688414.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:35.167Z,1509688415.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:35.530Z,1509688415.530 [NAL9602](INFO): Powering up NAL9602
2017-11-03T05:53:35.574Z,1509688415.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:35.975Z,1509688415.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:36.367Z,1509688416.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:36.769Z,1509688416.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:37.175Z,1509688417.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:37.562Z,1509688417.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:37.969Z,1509688417.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:38.367Z,1509688418.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:38.767Z,1509688418.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:39.169Z,1509688419.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:39.567Z,1509688419.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:39.969Z,1509688419.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:40.368Z,1509688420.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:40.767Z,1509688420.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:41.169Z,1509688421.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:41.570Z,1509688421.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:41.967Z,1509688421.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:42.367Z,1509688422.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:42.770Z,1509688422.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:43.175Z,1509688423.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:43.570Z,1509688423.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:43.969Z,1509688423.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:44.427Z,1509688424.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:44.767Z,1509688424.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:45.210Z,1509688425.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:45.568Z,1509688425.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:45.991Z,1509688425.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:49.110Z,1509688429.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:49.211Z,1509688429.211 [NAL9602](INFO): NAL9602 initialized
2017-11-03T05:53:49.277Z,1509688429.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:49.660Z,1509688429.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:50.083Z,1509688430.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:50.472Z,1509688430.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:50.859Z,1509688430.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:51.263Z,1509688431.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:51.662Z,1509688431.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:52.067Z,1509688432.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:52.467Z,1509688432.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:52.875Z,1509688432.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:53.269Z,1509688433.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:53.686Z,1509688433.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:54.059Z,1509688434.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:54.463Z,1509688434.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:54.866Z,1509688434.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:55.273Z,1509688435.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:55.679Z,1509688435.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:56.073Z,1509688436.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:56.467Z,1509688436.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:56.868Z,1509688436.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:57.272Z,1509688437.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:57.655Z,1509688437.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:58.053Z,1509688438.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:58.480Z,1509688438.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:58.895Z,1509688438.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:59.282Z,1509688439.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:53:59.651Z,1509688439.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:00.055Z,1509688440.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:00.458Z,1509688440.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:00.919Z,1509688440.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:01.268Z,1509688441.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:01.706Z,1509688441.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:02.086Z,1509688442.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:02.495Z,1509688442.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:02.894Z,1509688442.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:03.256Z,1509688443.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:03.657Z,1509688443.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:04.054Z,1509688444.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:04.470Z,1509688444.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:04.868Z,1509688444.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:05.290Z,1509688445.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:05.652Z,1509688445.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:06.059Z,1509688446.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:06.459Z,1509688446.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:06.857Z,1509688446.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:07.271Z,1509688447.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:07.671Z,1509688447.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:08.071Z,1509688448.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:08.478Z,1509688448.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:08.856Z,1509688448.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:09.292Z,1509688449.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:09.678Z,1509688449.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:10.078Z,1509688450.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:10.471Z,1509688450.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:10.871Z,1509688450.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:11.278Z,1509688451.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:11.678Z,1509688451.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:12.057Z,1509688452.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:12.461Z,1509688452.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:12.866Z,1509688452.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:13.290Z,1509688453.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:13.675Z,1509688453.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:14.079Z,1509688454.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:14.460Z,1509688454.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:14.930Z,1509688454.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:15.252Z,1509688455.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:15.693Z,1509688455.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:16.060Z,1509688456.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:16.499Z,1509688456.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:16.903Z,1509688456.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:17.271Z,1509688457.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:17.661Z,1509688457.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:18.078Z,1509688458.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:18.457Z,1509688458.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:18.854Z,1509688458.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:19.269Z,1509688459.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:19.694Z,1509688459.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:20.060Z,1509688460.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:20.462Z,1509688460.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:20.863Z,1509688460.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:21.271Z,1509688461.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:21.659Z,1509688461.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:22.062Z,1509688462.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:22.466Z,1509688462.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:22.890Z,1509688462.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:23.275Z,1509688463.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:23.654Z,1509688463.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:24.060Z,1509688464.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:24.460Z,1509688464.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:24.858Z,1509688464.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:25.278Z,1509688465.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:25.679Z,1509688465.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:26.090Z,1509688466.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:26.457Z,1509688466.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:26.861Z,1509688466.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:27.262Z,1509688467.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:27.678Z,1509688467.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:28.058Z,1509688468.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:28.468Z,1509688468.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:28.927Z,1509688468.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:29.297Z,1509688469.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:29.657Z,1509688469.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:30.096Z,1509688470.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:30.463Z,1509688470.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:30.898Z,1509688470.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:31.307Z,1509688471.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:31.674Z,1509688471.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:32.079Z,1509688472.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:32.483Z,1509688472.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:32.857Z,1509688472.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:33.265Z,1509688473.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:33.671Z,1509688473.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:34.062Z,1509688474.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:34.472Z,1509688474.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:34.876Z,1509688474.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:35.279Z,1509688475.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:35.662Z,1509688475.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:36.070Z,1509688476.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:36.465Z,1509688476.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:36.863Z,1509688476.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:37.278Z,1509688477.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:37.671Z,1509688477.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:38.071Z,1509688478.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:38.465Z,1509688478.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:38.843Z,1509688478.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:39.250Z,1509688479.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:39.647Z,1509688479.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:40.055Z,1509688480.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:40.479Z,1509688480.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:40.881Z,1509688480.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:41.278Z,1509688481.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:41.654Z,1509688481.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:42.055Z,1509688482.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:42.454Z,1509688482.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:42.852Z,1509688482.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:43.307Z,1509688483.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:43.710Z,1509688483.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:44.080Z,1509688484.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:44.483Z,1509688484.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:44.854Z,1509688484.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:45.284Z,1509688485.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:45.690Z,1509688485.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:46.052Z,1509688486.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:49.149Z,1509688489.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:49.303Z,1509688489.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:49.699Z,1509688489.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:50.089Z,1509688490.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:50.487Z,1509688490.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:50.890Z,1509688490.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:51.303Z,1509688491.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:51.700Z,1509688491.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:52.102Z,1509688492.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:52.492Z,1509688492.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:52.891Z,1509688492.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:53.293Z,1509688493.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:53.692Z,1509688493.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:54.089Z,1509688494.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:54.499Z,1509688494.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:54.901Z,1509688494.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:55.301Z,1509688495.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:55.692Z,1509688495.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:56.095Z,1509688496.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:56.491Z,1509688496.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:56.898Z,1509688496.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:57.299Z,1509688497.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:57.770Z,1509688497.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:58.105Z,1509688498.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:58.530Z,1509688498.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:58.889Z,1509688498.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:59.315Z,1509688499.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:54:59.738Z,1509688499.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:00.095Z,1509688500.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:00.503Z,1509688500.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:00.907Z,1509688500.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:01.302Z,1509688501.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:01.692Z,1509688501.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:02.088Z,1509688502.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:02.495Z,1509688502.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:02.893Z,1509688502.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:03.302Z,1509688503.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:03.707Z,1509688503.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:04.106Z,1509688504.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:04.491Z,1509688504.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:04.899Z,1509688504.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:05.298Z,1509688505.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:05.690Z,1509688505.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:06.092Z,1509688506.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:06.510Z,1509688506.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:06.899Z,1509688506.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:07.307Z,1509688507.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:07.694Z,1509688507.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:08.090Z,1509688508.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:08.493Z,1509688508.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:08.891Z,1509688508.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:09.302Z,1509688509.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:09.711Z,1509688509.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:10.104Z,1509688510.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:10.495Z,1509688510.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:10.892Z,1509688510.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:11.295Z,1509688511.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:11.754Z,1509688511.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:12.103Z,1509688512.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:12.532Z,1509688512.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:12.905Z,1509688512.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:13.334Z,1509688513.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:13.734Z,1509688513.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:14.096Z,1509688514.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:14.493Z,1509688514.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:14.893Z,1509688514.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:15.307Z,1509688515.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:15.711Z,1509688515.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:16.103Z,1509688516.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:16.492Z,1509688516.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:16.893Z,1509688516.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:17.293Z,1509688517.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:17.691Z,1509688517.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:18.099Z,1509688518.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:18.501Z,1509688518.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:18.903Z,1509688518.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:19.302Z,1509688519.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:19.691Z,1509688519.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:20.093Z,1509688520.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:20.494Z,1509688520.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:20.893Z,1509688520.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:21.305Z,1509688521.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:21.711Z,1509688521.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:22.106Z,1509688522.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:22.493Z,1509688522.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:22.893Z,1509688522.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:23.298Z,1509688523.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:23.695Z,1509688523.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:24.091Z,1509688524.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:24.499Z,1509688524.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:24.904Z,1509688524.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:25.305Z,1509688525.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:25.763Z,1509688525.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:26.105Z,1509688526.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:26.523Z,1509688526.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:26.906Z,1509688526.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:27.346Z,1509688527.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:27.745Z,1509688527.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:28.103Z,1509688528.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:28.500Z,1509688528.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:28.882Z,1509688528.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:29.284Z,1509688529.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:29.683Z,1509688529.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:30.107Z,1509688530.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:30.495Z,1509688530.495 [PNI_TCM](ERROR): CRC does not match. Expected:0x9190 got:0x45581
2017-11-03T05:55:30.523Z,1509688530.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:30.902Z,1509688530.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:31.303Z,1509688531.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:31.706Z,1509688531.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:32.082Z,1509688532.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:32.506Z,1509688532.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:32.907Z,1509688532.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:33.303Z,1509688533.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:33.707Z,1509688533.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:34.110Z,1509688534.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:34.503Z,1509688534.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:34.910Z,1509688534.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:35.306Z,1509688535.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:35.681Z,1509688535.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:36.083Z,1509688536.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:36.506Z,1509688536.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:36.906Z,1509688536.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:37.303Z,1509688537.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:37.684Z,1509688537.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:38.106Z,1509688538.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:38.487Z,1509688538.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:38.890Z,1509688538.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:39.311Z,1509688539.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:39.778Z,1509688539.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:40.114Z,1509688540.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:40.526Z,1509688540.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:40.884Z,1509688540.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:41.326Z,1509688541.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:41.711Z,1509688541.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x613 got:0x45579
2017-11-03T05:55:41.739Z,1509688541.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:42.119Z,1509688542.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:42.510Z,1509688542.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:42.909Z,1509688542.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:43.310Z,1509688543.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:43.690Z,1509688543.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:44.085Z,1509688544.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:44.490Z,1509688544.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:44.907Z,1509688544.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:45.281Z,1509688545.281 [PNI_TCM](ERROR): CRC does not match. Expected:0x48147 got:0x1857
2017-11-03T05:55:45.318Z,1509688545.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:45.322Z,1509688545.322 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T05:55:45.322Z,1509688545.322 [Default:CheckIn:C.Wait] Stopped
2017-11-03T05:55:45.322Z,1509688545.322 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T05:55:45.322Z,1509688545.322 [Default:CheckIn:D] Running Loop=1
2017-11-03T05:55:45.711Z,1509688545.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:45.714Z,1509688545.714 [Default:CheckIn:D] Stopped
2017-11-03T05:55:45.714Z,1509688545.714 [Default:CheckIn:E] Running Loop=1
2017-11-03T05:55:46.109Z,1509688546.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:46.113Z,1509688546.113 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 340.635807 min 
2017-11-03T05:55:46.113Z,1509688546.113 [Default:CheckIn:E] Stopped
2017-11-03T05:55:46.113Z,1509688546.113 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T05:55:46.113Z,1509688546.113 [Default:CheckIn] Stopped
2017-11-03T05:55:46.113Z,1509688546.113 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T05:55:46.113Z,1509688546.113 [Default:CheckIn](INFO): Running loop #34
2017-11-03T05:55:46.114Z,1509688546.114 [Default:CheckIn] Running Loop=34
2017-11-03T05:55:46.114Z,1509688546.114 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T05:55:46.114Z,1509688546.114 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T05:55:49.186Z,1509688549.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:49.362Z,1509688549.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:49.762Z,1509688549.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:50.163Z,1509688550.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:50.564Z,1509688550.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:50.564Z,1509688550.564 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 114
2017-11-03T05:55:50.564Z,1509688550.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:55:50.566Z,1509688550.566 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:50.566Z,1509688550.566 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 114
2017-11-03T05:55:50.566Z,1509688550.566 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:55:50.568Z,1509688550.568 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:50.568Z,1509688550.568 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114
2017-11-03T05:55:50.568Z,1509688550.568 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:55:50.661Z,1509688550.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:55:50.661Z,1509688550.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:55:50.661Z,1509688550.661 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:55:51.048Z,1509688551.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:55:51.048Z,1509688551.048 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 114
2017-11-03T05:55:51.049Z,1509688551.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:55:51.049Z,1509688551.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 114
2017-11-03T05:55:51.049Z,1509688551.049 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:55:51.049Z,1509688551.049 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114
2017-11-03T05:55:51.343Z,1509688551.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:55:51.343Z,1509688551.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:55:51.343Z,1509688551.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:55:51.344Z,1509688551.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:55:51.344Z,1509688551.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:55:51.345Z,1509688551.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:55:51.345Z,1509688551.345 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:55:51.346Z,1509688551.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:55:51.346Z,1509688551.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:55:51.748Z,1509688551.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T05:55:51.749Z,1509688551.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:52.152Z,1509688552.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:55:52.153Z,1509688552.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:52.573Z,1509688552.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:55:52.574Z,1509688552.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:52.952Z,1509688552.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:55:52.953Z,1509688552.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:53.348Z,1509688553.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:55:53.349Z,1509688553.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:53.749Z,1509688553.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:55:53.750Z,1509688553.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:54.206Z,1509688554.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:55:54.207Z,1509688554.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:54.551Z,1509688554.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:55:54.552Z,1509688554.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:54.994Z,1509688554.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:55:54.995Z,1509688554.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:55.351Z,1509688555.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:55:55.352Z,1509688555.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:55.805Z,1509688555.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:55:55.806Z,1509688555.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:56.226Z,1509688556.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T05:55:56.227Z,1509688556.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:56.560Z,1509688556.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:55:56.593Z,1509688556.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:56.967Z,1509688556.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:55:56.967Z,1509688556.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:57.367Z,1509688557.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:55:57.367Z,1509688557.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:57.803Z,1509688557.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:55:57.809Z,1509688557.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:58.198Z,1509688558.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:55:58.199Z,1509688558.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:58.570Z,1509688558.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T05:55:58.571Z,1509688558.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:58.977Z,1509688558.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:55:58.978Z,1509688558.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:59.383Z,1509688559.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T05:55:59.384Z,1509688559.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:55:59.763Z,1509688559.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:55:59.763Z,1509688559.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:00.171Z,1509688560.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T05:56:00.172Z,1509688560.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:00.575Z,1509688560.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:56:00.575Z,1509688560.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:00.971Z,1509688560.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T05:56:00.972Z,1509688560.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:01.375Z,1509688561.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T05:56:01.376Z,1509688561.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:01.783Z,1509688561.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:56:01.784Z,1509688561.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:02.187Z,1509688562.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:56:02.188Z,1509688562.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:02.587Z,1509688562.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:56:02.588Z,1509688562.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:02.997Z,1509688562.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T05:56:02.998Z,1509688562.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:03.377Z,1509688563.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T05:56:03.378Z,1509688563.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:03.763Z,1509688563.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T05:56:03.764Z,1509688563.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:04.187Z,1509688564.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T05:56:04.188Z,1509688564.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:04.589Z,1509688564.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T05:56:04.590Z,1509688564.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:04.991Z,1509688564.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T05:56:04.992Z,1509688564.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:05.399Z,1509688565.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T05:56:05.400Z,1509688565.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:05.768Z,1509688565.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T05:56:05.793Z,1509688565.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:06.163Z,1509688566.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T05:56:06.164Z,1509688566.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:06.563Z,1509688566.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:56:06.564Z,1509688566.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:06.968Z,1509688566.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:56:06.992Z,1509688566.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:07.350Z,1509688567.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T05:56:07.351Z,1509688567.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:07.770Z,1509688567.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:56:07.771Z,1509688567.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:08.242Z,1509688568.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T05:56:08.243Z,1509688568.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:08.571Z,1509688568.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:56:08.572Z,1509688568.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:08.979Z,1509688568.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T05:56:08.980Z,1509688568.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:09.394Z,1509688569.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T05:56:09.395Z,1509688569.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:09.748Z,1509688569.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T05:56:09.773Z,1509688569.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:10.226Z,1509688570.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T05:56:10.227Z,1509688570.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:10.622Z,1509688570.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:10.953Z,1509688570.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:11.348Z,1509688571.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:11.747Z,1509688571.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:12.153Z,1509688572.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:12.573Z,1509688572.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:12.974Z,1509688572.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:13.348Z,1509688573.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:13.748Z,1509688573.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:14.143Z,1509688574.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:14.548Z,1509688574.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:14.947Z,1509688574.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:15.374Z,1509688575.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:15.753Z,1509688575.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:16.174Z,1509688576.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:16.547Z,1509688576.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:16.947Z,1509688576.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:17.348Z,1509688577.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:17.743Z,1509688577.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:18.173Z,1509688578.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:18.572Z,1509688578.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:18.974Z,1509688578.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:19.348Z,1509688579.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:19.748Z,1509688579.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:20.146Z,1509688580.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:20.548Z,1509688580.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:20.948Z,1509688580.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:21.373Z,1509688581.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:21.774Z,1509688581.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:22.153Z,1509688582.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:22.610Z,1509688582.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:22.955Z,1509688582.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:23.353Z,1509688583.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:23.783Z,1509688583.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:24.163Z,1509688584.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:24.587Z,1509688584.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:24.987Z,1509688584.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:25.349Z,1509688585.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:25.752Z,1509688585.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:26.155Z,1509688586.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:26.556Z,1509688586.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:26.956Z,1509688586.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:27.345Z,1509688587.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:27.755Z,1509688587.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:28.157Z,1509688588.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:28.556Z,1509688588.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:28.957Z,1509688588.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:29.353Z,1509688589.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:29.759Z,1509688589.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:30.157Z,1509688590.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:30.563Z,1509688590.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:30.963Z,1509688590.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:31.351Z,1509688591.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:31.752Z,1509688591.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:32.162Z,1509688592.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:32.557Z,1509688592.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:32.963Z,1509688592.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:33.346Z,1509688593.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:33.751Z,1509688593.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:34.163Z,1509688594.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:34.557Z,1509688594.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:34.956Z,1509688594.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:35.352Z,1509688595.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:35.745Z,1509688595.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:36.155Z,1509688596.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:36.556Z,1509688596.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:37.007Z,1509688597.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:37.353Z,1509688597.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:37.752Z,1509688597.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:38.242Z,1509688598.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:38.567Z,1509688598.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:38.990Z,1509688598.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:39.390Z,1509688599.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:39.755Z,1509688599.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:40.152Z,1509688600.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:40.553Z,1509688600.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:40.949Z,1509688600.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:41.360Z,1509688601.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:41.767Z,1509688601.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:42.161Z,1509688602.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:42.546Z,1509688602.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:42.946Z,1509688602.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:43.352Z,1509688603.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:43.751Z,1509688603.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:44.246Z,1509688604.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:44.567Z,1509688604.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:44.966Z,1509688604.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:45.355Z,1509688605.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:45.755Z,1509688605.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:46.151Z,1509688606.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:49.261Z,1509688609.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:49.419Z,1509688609.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:49.840Z,1509688609.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:50.237Z,1509688610.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:50.639Z,1509688610.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:51.027Z,1509688611.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:51.466Z,1509688611.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:51.853Z,1509688611.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:52.224Z,1509688612.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:52.623Z,1509688612.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:53.063Z,1509688613.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:53.418Z,1509688613.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:53.857Z,1509688613.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:54.257Z,1509688614.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:54.616Z,1509688614.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:55.017Z,1509688615.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:55.435Z,1509688615.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:55.928Z,1509688615.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:56.228Z,1509688616.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:56.623Z,1509688616.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:57.019Z,1509688617.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:57.417Z,1509688617.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:57.816Z,1509688617.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:58.232Z,1509688618.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:58.628Z,1509688618.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:59.028Z,1509688619.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:59.417Z,1509688619.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:56:59.823Z,1509688619.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:00.216Z,1509688620.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:00.619Z,1509688620.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:01.016Z,1509688621.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:01.428Z,1509688621.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:01.832Z,1509688621.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:02.235Z,1509688622.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:02.616Z,1509688622.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:03.019Z,1509688623.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:03.417Z,1509688623.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:03.816Z,1509688623.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:04.224Z,1509688624.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:04.628Z,1509688624.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:05.028Z,1509688625.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:05.419Z,1509688625.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:05.817Z,1509688625.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:06.243Z,1509688626.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:06.616Z,1509688626.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:07.017Z,1509688627.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:07.427Z,1509688627.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:07.824Z,1509688627.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:08.228Z,1509688628.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:08.616Z,1509688628.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:09.015Z,1509688629.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:09.410Z,1509688629.410 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:57:09.411Z,1509688629.411 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:57:09.411Z,1509688629.411 [BPC1](ERROR): Communications Fault
2017-11-03T05:57:09.419Z,1509688629.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:09.529Z,1509688629.529 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:57:09.827Z,1509688629.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:10.224Z,1509688630.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:10.628Z,1509688630.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:10.705Z,1509688630.705 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:57:10.705Z,1509688630.705 [BPC1] No Fault, FailCount= 1
2017-11-03T05:57:11.082Z,1509688631.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:11.415Z,1509688631.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:11.819Z,1509688631.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:12.223Z,1509688632.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:12.631Z,1509688632.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:13.020Z,1509688633.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:13.428Z,1509688633.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:13.839Z,1509688633.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:14.228Z,1509688634.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:14.619Z,1509688634.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:15.023Z,1509688635.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:15.420Z,1509688635.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:15.820Z,1509688635.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:16.229Z,1509688636.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:16.632Z,1509688636.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:17.035Z,1509688637.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:17.421Z,1509688637.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:17.819Z,1509688637.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:18.221Z,1509688638.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:18.621Z,1509688638.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:19.019Z,1509688639.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:19.435Z,1509688639.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:19.838Z,1509688639.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:20.224Z,1509688640.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:20.620Z,1509688640.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:21.020Z,1509688641.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:21.420Z,1509688641.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:21.827Z,1509688641.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:22.229Z,1509688642.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:22.633Z,1509688642.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:23.026Z,1509688643.026 [BPC1](ERROR): Failed to parse message.
2017-11-03T05:57:23.026Z,1509688643.026 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T05:57:23.026Z,1509688643.026 [BPC1] Data Fault, FailCount= 2
2017-11-03T05:57:23.026Z,1509688643.026 [BPC1](ERROR): Data Fault
2017-11-03T05:57:23.034Z,1509688643.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:23.129Z,1509688643.129 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:57:23.421Z,1509688643.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:23.821Z,1509688643.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:24.219Z,1509688644.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:24.313Z,1509688644.313 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:57:24.313Z,1509688644.313 [BPC1] No Fault, FailCount= 2
2017-11-03T05:57:24.665Z,1509688644.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:25.020Z,1509688645.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:25.470Z,1509688645.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:25.834Z,1509688645.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:26.229Z,1509688646.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:26.620Z,1509688646.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:27.023Z,1509688647.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:27.421Z,1509688647.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:27.820Z,1509688647.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:28.232Z,1509688648.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:28.632Z,1509688648.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:29.029Z,1509688649.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:29.422Z,1509688649.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:29.819Z,1509688649.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:30.223Z,1509688650.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:30.602Z,1509688650.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:31.031Z,1509688651.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:31.431Z,1509688651.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:31.835Z,1509688651.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:32.227Z,1509688652.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:32.607Z,1509688652.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:33.007Z,1509688653.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:33.407Z,1509688653.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:33.825Z,1509688653.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:34.232Z,1509688654.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:34.639Z,1509688654.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:35.035Z,1509688655.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:35.422Z,1509688655.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:35.851Z,1509688655.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:36.219Z,1509688656.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:36.629Z,1509688656.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:37.027Z,1509688657.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:37.475Z,1509688657.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:37.834Z,1509688657.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:38.259Z,1509688658.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:38.643Z,1509688658.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:39.029Z,1509688659.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:39.426Z,1509688659.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:39.825Z,1509688659.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:40.229Z,1509688660.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:40.635Z,1509688660.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:41.027Z,1509688661.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:41.429Z,1509688661.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:41.807Z,1509688661.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:42.239Z,1509688662.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:42.629Z,1509688662.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:43.007Z,1509688663.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:43.435Z,1509688663.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:43.838Z,1509688663.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:44.228Z,1509688664.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:44.618Z,1509688664.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:45.030Z,1509688665.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:45.426Z,1509688665.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:45.825Z,1509688665.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:46.229Z,1509688666.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:49.379Z,1509688669.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:49.562Z,1509688669.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:49.930Z,1509688669.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:50.339Z,1509688670.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:50.759Z,1509688670.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:51.144Z,1509688671.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:51.543Z,1509688671.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:51.983Z,1509688671.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:52.336Z,1509688672.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:52.755Z,1509688672.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:53.183Z,1509688673.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:53.544Z,1509688673.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:53.941Z,1509688673.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:54.336Z,1509688674.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:54.742Z,1509688674.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:55.143Z,1509688675.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:55.543Z,1509688675.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:55.942Z,1509688675.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:56.340Z,1509688676.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:56.719Z,1509688676.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:57.141Z,1509688677.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:57.551Z,1509688677.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:57.943Z,1509688677.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:58.315Z,1509688678.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:58.740Z,1509688678.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:59.143Z,1509688679.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:59.543Z,1509688679.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:57:59.943Z,1509688679.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:00.337Z,1509688680.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:00.740Z,1509688680.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:01.139Z,1509688681.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:01.543Z,1509688681.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:01.942Z,1509688681.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:02.340Z,1509688682.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:02.719Z,1509688682.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:03.150Z,1509688683.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:03.543Z,1509688683.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:03.943Z,1509688683.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:04.363Z,1509688684.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:04.741Z,1509688684.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:05.143Z,1509688685.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:05.559Z,1509688685.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:05.944Z,1509688685.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:06.341Z,1509688686.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:06.758Z,1509688686.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:07.151Z,1509688687.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:07.580Z,1509688687.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:07.981Z,1509688687.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:08.342Z,1509688688.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:08.741Z,1509688688.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:09.143Z,1509688689.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:09.551Z,1509688689.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:09.943Z,1509688689.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:10.315Z,1509688690.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:10.715Z,1509688690.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:11.143Z,1509688691.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:11.544Z,1509688691.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:11.943Z,1509688691.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:12.336Z,1509688692.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:12.719Z,1509688692.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:13.140Z,1509688693.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:13.543Z,1509688693.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:13.942Z,1509688693.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:14.337Z,1509688694.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:14.719Z,1509688694.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:15.144Z,1509688695.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:15.543Z,1509688695.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:15.943Z,1509688695.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:16.339Z,1509688696.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:16.717Z,1509688696.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:17.141Z,1509688697.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:17.545Z,1509688697.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:17.955Z,1509688697.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:18.332Z,1509688698.332 [BPC1](ERROR): Failed to parse message.
2017-11-03T05:58:18.333Z,1509688698.333 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T05:58:18.333Z,1509688698.333 [BPC1] Data Fault, FailCount= 1
2017-11-03T05:58:18.333Z,1509688698.333 [BPC1](ERROR): Data Fault
2017-11-03T05:58:18.342Z,1509688698.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:18.429Z,1509688698.429 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T05:58:18.720Z,1509688698.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:19.143Z,1509688699.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:19.544Z,1509688699.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:19.637Z,1509688699.637 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:58:19.637Z,1509688699.637 [BPC1] No Fault, FailCount= 1
2017-11-03T05:58:19.999Z,1509688699.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:20.341Z,1509688700.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:20.737Z,1509688700.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:21.168Z,1509688701.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:21.543Z,1509688701.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:21.939Z,1509688701.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:22.342Z,1509688702.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:22.719Z,1509688702.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:23.143Z,1509688703.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:23.543Z,1509688703.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:23.940Z,1509688703.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:24.330Z,1509688704.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:24.739Z,1509688704.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:25.140Z,1509688705.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:25.541Z,1509688705.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:25.942Z,1509688705.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:26.320Z,1509688706.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:26.738Z,1509688706.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:27.143Z,1509688707.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:27.540Z,1509688707.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:27.943Z,1509688707.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:28.337Z,1509688708.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:28.718Z,1509688708.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:29.143Z,1509688709.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:29.540Z,1509688709.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:29.943Z,1509688709.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:30.337Z,1509688710.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:30.739Z,1509688710.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:31.141Z,1509688711.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:31.543Z,1509688711.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:31.971Z,1509688711.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:32.319Z,1509688712.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:32.719Z,1509688712.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:33.167Z,1509688713.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:33.541Z,1509688713.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:33.941Z,1509688713.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:34.359Z,1509688714.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:34.718Z,1509688714.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:35.175Z,1509688715.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:35.551Z,1509688715.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:35.971Z,1509688715.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:36.320Z,1509688716.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:36.727Z,1509688716.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:37.145Z,1509688717.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:37.545Z,1509688717.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:37.948Z,1509688717.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:38.347Z,1509688718.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:38.723Z,1509688718.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:39.155Z,1509688719.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:39.555Z,1509688719.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:39.945Z,1509688719.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:40.347Z,1509688720.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:40.723Z,1509688720.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:41.145Z,1509688721.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:41.555Z,1509688721.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:41.947Z,1509688721.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:42.324Z,1509688722.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:42.749Z,1509688722.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:43.145Z,1509688723.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:43.546Z,1509688723.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:43.945Z,1509688723.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:44.327Z,1509688724.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:44.747Z,1509688724.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:45.155Z,1509688725.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:45.555Z,1509688725.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:45.951Z,1509688725.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:46.327Z,1509688726.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:49.463Z,1509688729.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:49.651Z,1509688729.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:50.024Z,1509688730.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:50.431Z,1509688730.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:50.813Z,1509688730.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:51.209Z,1509688731.209 [BPC1](ERROR): Failed to receive battery data
2017-11-03T05:58:51.209Z,1509688731.209 [BPC1] Communications Fault, FailCount= 1
2017-11-03T05:58:51.209Z,1509688731.209 [BPC1](ERROR): Communications Fault
2017-11-03T05:58:51.217Z,1509688731.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:51.305Z,1509688731.305 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T05:58:51.615Z,1509688731.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:51.616Z,1509688731.616 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 115
2017-11-03T05:58:51.616Z,1509688731.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T05:58:51.618Z,1509688731.618 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:51.618Z,1509688731.618 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 115
2017-11-03T05:58:51.618Z,1509688731.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T05:58:51.620Z,1509688731.620 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:51.620Z,1509688731.620 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115
2017-11-03T05:58:51.620Z,1509688731.620 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T05:58:51.693Z,1509688731.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T05:58:51.693Z,1509688731.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T05:58:51.693Z,1509688731.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T05:58:52.104Z,1509688732.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T05:58:52.105Z,1509688732.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 115
2017-11-03T05:58:52.105Z,1509688732.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T05:58:52.105Z,1509688732.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 115
2017-11-03T05:58:52.106Z,1509688732.106 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T05:58:52.106Z,1509688732.106 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115
2017-11-03T05:58:52.428Z,1509688732.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T05:58:52.428Z,1509688732.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:58:52.429Z,1509688732.429 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:58:52.429Z,1509688732.429 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T05:58:52.429Z,1509688732.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:58:52.430Z,1509688732.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:58:52.430Z,1509688732.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T05:58:52.431Z,1509688732.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T05:58:52.431Z,1509688732.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T05:58:52.505Z,1509688732.505 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T05:58:52.505Z,1509688732.505 [BPC1] No Fault, FailCount= 1
2017-11-03T05:58:52.882Z,1509688732.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-03T05:58:52.883Z,1509688732.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:53.224Z,1509688733.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T05:58:53.225Z,1509688733.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:53.620Z,1509688733.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T05:58:53.622Z,1509688733.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:54.038Z,1509688734.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T05:58:54.039Z,1509688734.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:54.419Z,1509688734.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T05:58:54.425Z,1509688734.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:54.822Z,1509688734.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T05:58:54.823Z,1509688734.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:55.226Z,1509688735.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T05:58:55.227Z,1509688735.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:55.624Z,1509688735.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T05:58:55.625Z,1509688735.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:56.023Z,1509688736.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T05:58:56.024Z,1509688736.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:56.422Z,1509688736.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T05:58:56.423Z,1509688736.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:56.806Z,1509688736.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T05:58:56.807Z,1509688736.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:57.206Z,1509688737.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T05:58:57.207Z,1509688737.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:57.600Z,1509688737.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T05:58:57.601Z,1509688737.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:58.006Z,1509688738.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T05:58:58.007Z,1509688738.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:58.429Z,1509688738.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T05:58:58.430Z,1509688738.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:58.826Z,1509688738.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T05:58:58.827Z,1509688738.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:59.223Z,1509688739.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T05:58:59.225Z,1509688739.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:58:59.599Z,1509688739.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T05:58:59.600Z,1509688739.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:00.004Z,1509688740.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T05:59:00.005Z,1509688740.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:00.405Z,1509688740.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T05:59:00.406Z,1509688740.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:00.827Z,1509688740.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T05:59:00.828Z,1509688740.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:01.228Z,1509688741.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T05:59:01.229Z,1509688741.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:01.624Z,1509688741.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T05:59:01.625Z,1509688741.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:02.038Z,1509688742.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T05:59:02.039Z,1509688742.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:02.404Z,1509688742.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T05:59:02.405Z,1509688742.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:02.826Z,1509688742.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T05:59:02.827Z,1509688742.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:03.229Z,1509688743.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T05:59:03.230Z,1509688743.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:03.604Z,1509688743.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T05:59:03.606Z,1509688743.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:04.003Z,1509688744.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T05:59:04.004Z,1509688744.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:04.477Z,1509688744.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T05:59:04.478Z,1509688744.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:04.832Z,1509688744.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T05:59:04.833Z,1509688744.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:05.263Z,1509688745.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T05:59:05.264Z,1509688745.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:05.601Z,1509688745.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T05:59:05.602Z,1509688745.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:06.050Z,1509688746.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T05:59:06.051Z,1509688746.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:06.438Z,1509688746.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T05:59:06.439Z,1509688746.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:06.809Z,1509688746.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T05:59:06.810Z,1509688746.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:07.228Z,1509688747.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T05:59:07.229Z,1509688747.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:07.628Z,1509688747.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T05:59:07.629Z,1509688747.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:08.031Z,1509688748.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T05:59:08.032Z,1509688748.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:08.411Z,1509688748.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T05:59:08.412Z,1509688748.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:08.806Z,1509688748.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T05:59:08.807Z,1509688748.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:09.209Z,1509688749.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T05:59:09.209Z,1509688749.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:09.607Z,1509688749.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T05:59:09.608Z,1509688749.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:10.006Z,1509688750.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T05:59:10.007Z,1509688750.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:10.431Z,1509688750.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T05:59:10.433Z,1509688750.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:10.834Z,1509688750.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T05:59:10.835Z,1509688750.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:11.228Z,1509688751.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T05:59:11.229Z,1509688751.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:11.601Z,1509688751.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T05:59:11.602Z,1509688751.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:12.032Z,1509688752.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:12.407Z,1509688752.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:12.806Z,1509688752.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:13.231Z,1509688753.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:13.629Z,1509688753.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:14.031Z,1509688754.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:14.411Z,1509688754.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:14.832Z,1509688754.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:15.209Z,1509688755.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:15.607Z,1509688755.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:16.006Z,1509688756.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:16.430Z,1509688756.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:16.831Z,1509688756.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:17.291Z,1509688757.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:17.606Z,1509688757.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:18.052Z,1509688758.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:18.415Z,1509688758.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:18.831Z,1509688758.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:19.251Z,1509688759.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:19.635Z,1509688759.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:20.033Z,1509688760.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:20.411Z,1509688760.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:20.811Z,1509688760.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:21.206Z,1509688761.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:21.607Z,1509688761.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:22.012Z,1509688762.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:22.434Z,1509688762.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:22.834Z,1509688762.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:23.235Z,1509688763.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:23.607Z,1509688763.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:24.007Z,1509688764.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:24.411Z,1509688764.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:24.807Z,1509688764.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:25.233Z,1509688765.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:25.635Z,1509688765.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:26.032Z,1509688766.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:26.407Z,1509688766.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:26.807Z,1509688766.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:27.207Z,1509688767.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:27.608Z,1509688767.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:28.007Z,1509688768.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:28.439Z,1509688768.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:28.836Z,1509688768.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:29.237Z,1509688769.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:29.618Z,1509688769.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:30.058Z,1509688770.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:30.468Z,1509688770.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:30.818Z,1509688770.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:31.227Z,1509688771.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:31.663Z,1509688771.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:32.026Z,1509688772.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:32.442Z,1509688772.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:32.854Z,1509688772.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:33.218Z,1509688773.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:33.614Z,1509688773.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:34.015Z,1509688774.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:34.420Z,1509688774.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:34.819Z,1509688774.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:35.223Z,1509688775.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:35.611Z,1509688775.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:36.019Z,1509688776.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:36.413Z,1509688776.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:36.810Z,1509688776.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:37.227Z,1509688777.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:37.620Z,1509688777.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:38.026Z,1509688778.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:38.454Z,1509688778.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:38.814Z,1509688778.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:39.211Z,1509688779.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:39.623Z,1509688779.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:40.015Z,1509688780.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:40.424Z,1509688780.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:40.831Z,1509688780.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:41.225Z,1509688781.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:41.615Z,1509688781.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:42.013Z,1509688782.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:42.415Z,1509688782.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:42.818Z,1509688782.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:43.224Z,1509688783.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:43.670Z,1509688783.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:44.023Z,1509688784.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:44.409Z,1509688784.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:44.850Z,1509688784.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:45.212Z,1509688785.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:45.655Z,1509688785.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:46.019Z,1509688786.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:46.460Z,1509688786.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:49.515Z,1509688789.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:49.694Z,1509688789.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:50.059Z,1509688790.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:50.461Z,1509688790.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:50.857Z,1509688790.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:51.265Z,1509688791.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:51.665Z,1509688791.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:52.068Z,1509688792.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:52.455Z,1509688792.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:52.865Z,1509688792.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:53.260Z,1509688793.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:53.662Z,1509688793.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:54.072Z,1509688794.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:54.468Z,1509688794.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:54.882Z,1509688794.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:55.268Z,1509688795.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:55.663Z,1509688795.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:56.055Z,1509688796.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:56.461Z,1509688796.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:56.883Z,1509688796.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:57.283Z,1509688797.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:57.667Z,1509688797.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:58.067Z,1509688798.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:58.482Z,1509688798.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:58.856Z,1509688798.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:59.287Z,1509688799.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T05:59:59.659Z,1509688799.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:00.102Z,1509688800.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:00.506Z,1509688800.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:00.862Z,1509688800.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:01.268Z,1509688801.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:01.662Z,1509688801.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:02.061Z,1509688802.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:02.444Z,1509688802.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:02.843Z,1509688802.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:03.273Z,1509688803.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:03.678Z,1509688803.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:04.070Z,1509688804.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:04.443Z,1509688804.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:04.846Z,1509688804.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:05.243Z,1509688805.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:05.640Z,1509688805.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:06.043Z,1509688806.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:06.468Z,1509688806.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:06.883Z,1509688806.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:07.274Z,1509688807.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:07.646Z,1509688807.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:08.046Z,1509688808.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:08.480Z,1509688808.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:08.847Z,1509688808.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:09.275Z,1509688809.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:09.674Z,1509688809.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:10.081Z,1509688810.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:10.447Z,1509688810.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:10.843Z,1509688810.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:11.251Z,1509688811.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:11.694Z,1509688811.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:12.059Z,1509688812.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:12.476Z,1509688812.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:12.894Z,1509688812.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:13.253Z,1509688813.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:13.651Z,1509688813.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:14.082Z,1509688814.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:14.455Z,1509688814.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:14.881Z,1509688814.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:15.287Z,1509688815.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:15.679Z,1509688815.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:16.059Z,1509688816.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:16.472Z,1509688816.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:16.854Z,1509688816.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:17.258Z,1509688817.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:17.652Z,1509688817.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:18.051Z,1509688818.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:18.457Z,1509688818.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:18.874Z,1509688818.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:19.256Z,1509688819.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:19.657Z,1509688819.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:20.050Z,1509688820.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:20.458Z,1509688820.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:20.861Z,1509688820.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:21.267Z,1509688821.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:21.662Z,1509688821.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:22.066Z,1509688822.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:22.459Z,1509688822.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:22.878Z,1509688822.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:23.256Z,1509688823.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:23.665Z,1509688823.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:24.051Z,1509688824.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:24.465Z,1509688824.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:24.878Z,1509688824.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:25.269Z,1509688825.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:25.665Z,1509688825.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:26.077Z,1509688826.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:26.444Z,1509688826.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:26.877Z,1509688826.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:27.276Z,1509688827.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:27.702Z,1509688827.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:28.078Z,1509688828.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:28.453Z,1509688828.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:28.883Z,1509688828.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:29.267Z,1509688829.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:29.686Z,1509688829.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:30.083Z,1509688830.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:30.466Z,1509688830.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:30.879Z,1509688830.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:31.267Z,1509688831.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:31.643Z,1509688831.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:32.046Z,1509688832.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:32.443Z,1509688832.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:32.843Z,1509688832.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:33.274Z,1509688833.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:33.674Z,1509688833.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:34.081Z,1509688834.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:34.451Z,1509688834.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:34.845Z,1509688834.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:35.250Z,1509688835.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:35.647Z,1509688835.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:36.051Z,1509688836.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:36.473Z,1509688836.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:36.875Z,1509688836.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:37.278Z,1509688837.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:37.651Z,1509688837.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:38.078Z,1509688838.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:38.451Z,1509688838.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:38.847Z,1509688838.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:39.281Z,1509688839.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:39.676Z,1509688839.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:40.080Z,1509688840.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:40.477Z,1509688840.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:40.894Z,1509688840.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:41.261Z,1509688841.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:41.655Z,1509688841.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:41.760Z,1509688841.760 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:00:41.761Z,1509688841.761 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T06:00:41.848Z,1509688841.848 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:00:41.849Z,1509688841.849 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:00:41.849Z,1509688841.849 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:00:41.849Z,1509688841.849 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:00:42.050Z,1509688842.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:42.502Z,1509688842.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:42.861Z,1509688842.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:43.291Z,1509688843.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:43.666Z,1509688843.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:44.087Z,1509688844.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:44.486Z,1509688844.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:44.854Z,1509688844.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:45.261Z,1509688845.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:45.662Z,1509688845.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:45.968Z,1509688845.968 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:00:46.089Z,1509688846.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:46.136Z,1509688846.136 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:00:46.137Z,1509688846.137 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:00:46.138Z,1509688846.138 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:00:46.139Z,1509688846.139 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:00:46.473Z,1509688846.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:46.477Z,1509688846.477 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T05:55:46.1Z
2017-11-03T06:00:46.477Z,1509688846.477 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T06:00:46.477Z,1509688846.477 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T06:00:49.599Z,1509688849.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:50.005Z,1509688850.005 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0136.lzma
2017-11-03T06:00:50.054Z,1509688850.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:50.367Z,1509688850.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:50.703Z,1509688850.703 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0136.lzma.bak
2017-11-03T06:00:50.703Z,1509688850.703 [DataOverHttps](INFO): SBD MOMSN=5182866
2017-11-03T06:00:50.769Z,1509688850.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:51.400Z,1509688851.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:51.578Z,1509688851.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:54.980Z,1509688854.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:55.210Z,1509688855.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:55.565Z,1509688855.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:55.975Z,1509688855.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:56.361Z,1509688856.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:00:56.783Z,1509688856.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:00.715Z,1509688860.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:00.821Z,1509688860.821 [DataOverHttps](INFO): Sending 252 bytes from file Logs/20171103T001125/Express0137.lzma
2017-11-03T06:01:00.899Z,1509688860.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:01.342Z,1509688861.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:01.623Z,1509688861.623 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0137.lzma.bak
2017-11-03T06:01:01.623Z,1509688861.623 [DataOverHttps](INFO): SBD MOMSN=5182868
2017-11-03T06:01:01.719Z,1509688861.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:04.399Z,1509688864.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:04.403Z,1509688864.403 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T06:01:04.403Z,1509688864.403 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T06:01:04.403Z,1509688864.403 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T06:01:04.587Z,1509688864.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:11.071Z,1509688871.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:11.314Z,1509688871.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:11.690Z,1509688871.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:12.110Z,1509688872.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:12.497Z,1509688872.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:12.851Z,1509688872.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:13.261Z,1509688873.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:13.661Z,1509688873.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:14.065Z,1509688874.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:14.472Z,1509688874.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:14.868Z,1509688874.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:15.262Z,1509688875.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:15.651Z,1509688875.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:16.036Z,1509688876.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:16.483Z,1509688876.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:16.869Z,1509688876.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:17.278Z,1509688877.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:17.666Z,1509688877.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:18.064Z,1509688878.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:18.431Z,1509688878.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:18.834Z,1509688878.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:19.234Z,1509688879.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:19.638Z,1509688879.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:20.077Z,1509688880.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:20.455Z,1509688880.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:20.851Z,1509688880.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:21.247Z,1509688881.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:21.636Z,1509688881.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:22.038Z,1509688882.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:22.480Z,1509688882.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:22.837Z,1509688882.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:23.306Z,1509688883.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:23.650Z,1509688883.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:24.090Z,1509688884.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:24.475Z,1509688884.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:24.877Z,1509688884.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:25.281Z,1509688885.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:25.647Z,1509688885.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:26.037Z,1509688886.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:26.457Z,1509688886.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:26.851Z,1509688886.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:27.251Z,1509688887.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:27.639Z,1509688887.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:28.035Z,1509688888.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:28.437Z,1509688888.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:28.833Z,1509688888.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:29.245Z,1509688889.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:29.653Z,1509688889.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:30.049Z,1509688890.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:30.443Z,1509688890.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:30.852Z,1509688890.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:31.240Z,1509688891.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:31.634Z,1509688891.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:32.035Z,1509688892.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:32.457Z,1509688892.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:32.856Z,1509688892.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:33.249Z,1509688893.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:33.637Z,1509688893.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:34.039Z,1509688894.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:34.451Z,1509688894.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:34.841Z,1509688894.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:35.249Z,1509688895.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:35.649Z,1509688895.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:36.054Z,1509688896.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:36.492Z,1509688896.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:36.847Z,1509688896.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:37.320Z,1509688897.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:37.625Z,1509688897.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:38.051Z,1509688898.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:38.511Z,1509688898.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:38.859Z,1509688898.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:39.279Z,1509688899.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:39.662Z,1509688899.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:40.033Z,1509688900.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:40.432Z,1509688900.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:40.834Z,1509688900.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:41.257Z,1509688901.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:41.661Z,1509688901.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:42.062Z,1509688902.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:42.431Z,1509688902.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:42.831Z,1509688902.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:43.229Z,1509688903.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:43.635Z,1509688903.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:44.040Z,1509688904.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:44.457Z,1509688904.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:44.861Z,1509688904.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:45.265Z,1509688905.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:45.630Z,1509688905.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:46.037Z,1509688906.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:46.431Z,1509688906.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:46.877Z,1509688906.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:47.244Z,1509688907.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:47.659Z,1509688907.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:48.094Z,1509688908.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:48.435Z,1509688908.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:48.837Z,1509688908.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:49.231Z,1509688909.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:49.309Z,1509688909.309 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T06:01:49.641Z,1509688909.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:50.037Z,1509688910.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:50.473Z,1509688910.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:50.863Z,1509688910.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:51.241Z,1509688911.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:51.715Z,1509688911.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:52.036Z,1509688912.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:52.495Z,1509688912.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:52.495Z,1509688912.495 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 116
2017-11-03T06:01:52.495Z,1509688912.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:01:52.497Z,1509688912.497 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:52.497Z,1509688912.497 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 116
2017-11-03T06:01:52.497Z,1509688912.497 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:01:52.499Z,1509688912.499 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:52.499Z,1509688912.499 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116
2017-11-03T06:01:52.499Z,1509688912.499 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:01:52.577Z,1509688912.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:01:52.577Z,1509688912.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:01:52.577Z,1509688912.577 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:01:52.928Z,1509688912.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:01:52.928Z,1509688912.928 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 116
2017-11-03T06:01:52.929Z,1509688912.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:01:52.929Z,1509688912.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 116
2017-11-03T06:01:52.929Z,1509688912.929 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:01:52.929Z,1509688912.929 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116
2017-11-03T06:01:53.282Z,1509688913.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:01:53.282Z,1509688913.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:01:53.282Z,1509688913.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:01:53.283Z,1509688913.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:01:53.283Z,1509688913.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:01:53.283Z,1509688913.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:01:53.284Z,1509688913.284 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:01:53.284Z,1509688913.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:01:53.285Z,1509688913.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:01:53.690Z,1509688913.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:54.054Z,1509688914.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:54.443Z,1509688914.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:54.843Z,1509688914.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:55.242Z,1509688915.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:55.639Z,1509688915.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:56.040Z,1509688916.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:56.450Z,1509688916.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:56.853Z,1509688916.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:57.248Z,1509688917.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:57.633Z,1509688917.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:58.042Z,1509688918.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:58.453Z,1509688918.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:58.849Z,1509688918.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:59.255Z,1509688919.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:01:59.659Z,1509688919.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:00.071Z,1509688920.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:00.451Z,1509688920.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:00.827Z,1509688920.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:01.229Z,1509688921.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:01.655Z,1509688921.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:02.032Z,1509688922.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:02.460Z,1509688922.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:02.846Z,1509688922.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:03.253Z,1509688923.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:03.638Z,1509688923.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:04.040Z,1509688924.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:04.478Z,1509688924.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:04.836Z,1509688924.836 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:02:04.836Z,1509688924.836 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:02:04.836Z,1509688924.836 [BPC1](ERROR): Data Fault
2017-11-03T06:02:04.849Z,1509688924.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:04.936Z,1509688924.936 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:02:08.137Z,1509688928.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:08.319Z,1509688928.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:08.696Z,1509688928.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:08.788Z,1509688928.788 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:02:08.789Z,1509688928.789 [BPC1] No Fault, FailCount= 1
2017-11-03T06:02:09.151Z,1509688929.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:09.487Z,1509688929.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:09.920Z,1509688929.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:10.334Z,1509688930.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:10.707Z,1509688930.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:11.106Z,1509688931.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:11.491Z,1509688931.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:11.918Z,1509688931.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:12.271Z,1509688932.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:12.696Z,1509688932.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:13.075Z,1509688933.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:13.502Z,1509688933.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:13.963Z,1509688933.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:14.299Z,1509688934.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:14.695Z,1509688934.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:15.094Z,1509688935.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:15.487Z,1509688935.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:15.894Z,1509688935.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:16.307Z,1509688936.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:16.697Z,1509688936.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:17.102Z,1509688937.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:17.494Z,1509688937.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:17.893Z,1509688937.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:18.287Z,1509688938.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:18.679Z,1509688938.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:19.075Z,1509688939.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:19.501Z,1509688939.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:19.898Z,1509688939.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:20.299Z,1509688940.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:20.703Z,1509688940.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:21.102Z,1509688941.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:21.479Z,1509688941.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:21.935Z,1509688941.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:22.334Z,1509688942.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:22.707Z,1509688942.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:23.122Z,1509688943.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:23.479Z,1509688943.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:23.925Z,1509688943.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:24.315Z,1509688944.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:24.679Z,1509688944.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:25.079Z,1509688945.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:25.508Z,1509688945.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:25.929Z,1509688945.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:26.305Z,1509688946.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:26.681Z,1509688946.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:27.080Z,1509688947.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:27.480Z,1509688947.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:27.926Z,1509688947.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:28.310Z,1509688948.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:28.689Z,1509688948.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:29.084Z,1509688949.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:29.483Z,1509688949.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:29.884Z,1509688949.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:30.282Z,1509688950.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:30.684Z,1509688950.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:31.082Z,1509688951.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:31.489Z,1509688951.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:31.910Z,1509688951.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:32.288Z,1509688952.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:32.686Z,1509688952.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:33.083Z,1509688953.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:33.483Z,1509688953.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:33.886Z,1509688953.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:34.289Z,1509688954.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:34.699Z,1509688954.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:35.092Z,1509688955.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:35.491Z,1509688955.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:35.928Z,1509688955.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:36.338Z,1509688956.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:36.735Z,1509688956.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:37.085Z,1509688957.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:37.530Z,1509688957.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:37.938Z,1509688957.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:38.331Z,1509688958.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:38.722Z,1509688958.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:39.087Z,1509688959.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:39.486Z,1509688959.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:39.938Z,1509688959.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:40.297Z,1509688960.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:40.696Z,1509688960.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:41.096Z,1509688961.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:41.481Z,1509688961.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:41.939Z,1509688961.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:41.959Z,1509688961.959 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:02:41.959Z,1509688961.959 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T06:02:41.959Z,1509688961.959 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:02:42.069Z,1509688962.069 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:02:42.288Z,1509688962.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.3 s old, using for 20.0 s.
2017-11-03T06:02:42.289Z,1509688962.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:42.361Z,1509688962.361 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:02:42.467Z,1509688962.467 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:02:42.690Z,1509688962.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:02:42.691Z,1509688962.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:43.089Z,1509688963.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-03T06:02:43.090Z,1509688963.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:43.493Z,1509688963.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:02:43.494Z,1509688963.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:43.903Z,1509688963.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:02:43.904Z,1509688963.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:43.985Z,1509688963.985 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:02:43.985Z,1509688963.985 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T06:02:44.084Z,1509688964.084 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:02:44.085Z,1509688964.085 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:02:44.085Z,1509688964.085 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:02:44.085Z,1509688964.085 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:02:44.307Z,1509688964.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:02:44.308Z,1509688964.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:44.687Z,1509688964.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-11-03T06:02:44.688Z,1509688964.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:45.094Z,1509688965.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:02:45.095Z,1509688965.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:45.487Z,1509688965.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T06:02:45.488Z,1509688965.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:45.894Z,1509688965.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:02:45.895Z,1509688965.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:46.295Z,1509688966.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:02:46.297Z,1509688966.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:46.696Z,1509688966.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:02:46.697Z,1509688966.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:47.102Z,1509688967.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:02:47.103Z,1509688967.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:47.487Z,1509688967.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T06:02:47.489Z,1509688967.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:47.888Z,1509688967.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T06:02:47.889Z,1509688967.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:48.207Z,1509688968.207 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:02:48.300Z,1509688968.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:02:48.309Z,1509688968.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:48.363Z,1509688968.363 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:02:48.365Z,1509688968.365 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:02:48.365Z,1509688968.365 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:02:48.366Z,1509688968.366 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:02:48.691Z,1509688968.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:02:48.692Z,1509688968.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:49.097Z,1509688969.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:49.502Z,1509688969.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:49.901Z,1509688969.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:50.303Z,1509688970.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:50.756Z,1509688970.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:51.075Z,1509688971.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:51.493Z,1509688971.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:51.911Z,1509688971.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:52.299Z,1509688972.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:52.745Z,1509688972.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:53.143Z,1509688973.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:53.474Z,1509688973.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:53.893Z,1509688973.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:54.290Z,1509688974.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:54.694Z,1509688974.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:55.093Z,1509688975.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:55.508Z,1509688975.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:55.896Z,1509688975.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:56.295Z,1509688976.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:56.686Z,1509688976.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:57.094Z,1509688977.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:57.494Z,1509688977.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:57.913Z,1509688977.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:58.296Z,1509688978.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:58.697Z,1509688978.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:59.098Z,1509688979.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:59.475Z,1509688979.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:02:59.912Z,1509688979.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:00.293Z,1509688980.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:00.677Z,1509688980.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:01.079Z,1509688981.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:01.499Z,1509688981.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:01.921Z,1509688981.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:02.297Z,1509688982.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:02.676Z,1509688982.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:03.089Z,1509688983.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:03.476Z,1509688983.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:03.923Z,1509688983.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:04.298Z,1509688984.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:04.698Z,1509688984.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:05.099Z,1509688985.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:08.415Z,1509688988.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:08.574Z,1509688988.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:09.011Z,1509688989.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:09.381Z,1509688989.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:09.811Z,1509688989.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:10.211Z,1509688990.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:10.583Z,1509688990.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:10.971Z,1509688990.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:11.376Z,1509688991.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:11.780Z,1509688991.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:12.202Z,1509688992.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:12.575Z,1509688992.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:12.979Z,1509688992.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:13.372Z,1509688993.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:13.771Z,1509688993.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:14.185Z,1509688994.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:14.591Z,1509688994.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:14.984Z,1509688994.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:15.373Z,1509688995.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:15.773Z,1509688995.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:16.186Z,1509688996.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:16.584Z,1509688996.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:16.963Z,1509688996.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:17.390Z,1509688997.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:17.784Z,1509688997.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:18.192Z,1509688998.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:18.567Z,1509688998.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:18.970Z,1509688998.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:19.367Z,1509688999.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:19.770Z,1509688999.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:20.199Z,1509689000.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:20.589Z,1509689000.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:20.994Z,1509689000.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:21.367Z,1509689001.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:21.767Z,1509689001.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:22.211Z,1509689002.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:22.603Z,1509689002.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:22.967Z,1509689002.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:23.411Z,1509689003.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:23.794Z,1509689003.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:24.211Z,1509689004.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:24.598Z,1509689004.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:24.967Z,1509689004.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:25.367Z,1509689005.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:25.767Z,1509689005.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:26.173Z,1509689006.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:26.599Z,1509689006.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:26.996Z,1509689006.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:27.368Z,1509689007.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:27.767Z,1509689007.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:28.172Z,1509689008.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:28.571Z,1509689008.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:28.971Z,1509689008.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:29.383Z,1509689009.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:29.784Z,1509689009.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:30.191Z,1509689010.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:30.574Z,1509689010.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:30.974Z,1509689010.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:31.374Z,1509689011.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:31.779Z,1509689011.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:32.193Z,1509689012.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:32.584Z,1509689012.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:32.986Z,1509689012.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:33.377Z,1509689013.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:33.779Z,1509689013.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:34.181Z,1509689014.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:34.576Z,1509689014.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:34.974Z,1509689014.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:35.384Z,1509689015.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:35.789Z,1509689015.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:36.204Z,1509689016.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:36.599Z,1509689016.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:36.999Z,1509689016.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:37.387Z,1509689017.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:37.775Z,1509689017.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:38.234Z,1509689018.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:38.586Z,1509689018.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:39.003Z,1509689019.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:39.377Z,1509689019.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:39.807Z,1509689019.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:40.173Z,1509689020.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:40.579Z,1509689020.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:40.972Z,1509689020.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:41.376Z,1509689021.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:41.776Z,1509689021.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:42.211Z,1509689022.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:42.577Z,1509689022.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:42.964Z,1509689022.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:43.364Z,1509689023.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:43.760Z,1509689023.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:44.173Z,1509689024.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:44.577Z,1509689024.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:44.999Z,1509689024.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:45.369Z,1509689025.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:45.773Z,1509689025.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:46.180Z,1509689026.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:46.574Z,1509689026.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:46.972Z,1509689026.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:47.386Z,1509689027.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:47.787Z,1509689027.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:48.181Z,1509689028.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:48.573Z,1509689028.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:48.975Z,1509689028.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:49.373Z,1509689029.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:49.773Z,1509689029.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:50.134Z,1509689030.134 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T06:03:50.134Z,1509689030.134 [NAL9602] Data Fault, FailCount= 2
2017-11-03T06:03:50.134Z,1509689030.134 [NAL9602](ERROR): Data Fault
2017-11-03T06:03:50.201Z,1509689030.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:50.296Z,1509689030.296 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T06:03:50.531Z,1509689030.531 [NAL9602](INFO): Powering down
2017-11-03T06:03:50.580Z,1509689030.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:50.967Z,1509689030.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:51.415Z,1509689031.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:51.504Z,1509689031.504 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T06:03:51.505Z,1509689031.505 [NAL9602] No Fault, FailCount= 2
2017-11-03T06:03:51.815Z,1509689031.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:52.173Z,1509689032.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:52.614Z,1509689032.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:52.973Z,1509689032.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:53.395Z,1509689033.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:53.814Z,1509689033.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:54.172Z,1509689034.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:54.591Z,1509689034.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:54.974Z,1509689034.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:55.372Z,1509689035.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:55.772Z,1509689035.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:56.169Z,1509689036.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:56.563Z,1509689036.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:56.963Z,1509689036.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:57.363Z,1509689037.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:57.762Z,1509689037.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:58.187Z,1509689038.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:58.573Z,1509689038.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:58.971Z,1509689038.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:59.371Z,1509689039.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:03:59.771Z,1509689039.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:00.191Z,1509689040.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:00.577Z,1509689040.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:00.978Z,1509689040.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:01.382Z,1509689041.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:01.777Z,1509689041.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:02.194Z,1509689042.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:02.582Z,1509689042.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:02.979Z,1509689042.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:03.384Z,1509689043.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:03.763Z,1509689043.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:04.183Z,1509689044.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:04.563Z,1509689044.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:04.964Z,1509689044.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:05.391Z,1509689045.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:08.714Z,1509689048.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:08.886Z,1509689048.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:09.264Z,1509689049.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:09.707Z,1509689049.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:10.087Z,1509689050.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:10.498Z,1509689050.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:10.899Z,1509689050.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:11.265Z,1509689051.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:11.676Z,1509689051.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:12.073Z,1509689052.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:12.465Z,1509689052.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:12.870Z,1509689052.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:13.274Z,1509689053.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:13.664Z,1509689053.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:14.063Z,1509689054.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:14.460Z,1509689054.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:14.877Z,1509689054.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:15.264Z,1509689055.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:15.660Z,1509689055.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:16.061Z,1509689056.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:16.469Z,1509689056.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:16.856Z,1509689056.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:17.265Z,1509689057.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:17.670Z,1509689057.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:18.116Z,1509689058.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:18.478Z,1509689058.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:18.866Z,1509689058.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:19.266Z,1509689059.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:19.692Z,1509689059.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:20.060Z,1509689060.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:20.474Z,1509689060.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:20.819Z,1509689060.819 [NAL9602](INFO): Powering up NAL9602
2017-11-03T06:04:20.870Z,1509689060.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:21.291Z,1509689061.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:21.664Z,1509689061.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:22.064Z,1509689062.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:22.479Z,1509689062.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:22.930Z,1509689062.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:23.263Z,1509689063.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:23.697Z,1509689063.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:24.066Z,1509689064.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:24.502Z,1509689064.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:24.896Z,1509689064.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:25.265Z,1509689065.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:25.670Z,1509689065.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:26.080Z,1509689066.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:26.456Z,1509689066.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:26.865Z,1509689066.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:27.265Z,1509689067.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:27.655Z,1509689067.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:28.060Z,1509689068.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:28.466Z,1509689068.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:28.863Z,1509689068.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:29.277Z,1509689069.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:29.663Z,1509689069.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:30.071Z,1509689070.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:30.465Z,1509689070.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:30.881Z,1509689070.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:31.268Z,1509689071.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:31.675Z,1509689071.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:32.020Z,1509689072.020 [NAL9602](INFO): NAL9602 initialized
2017-11-03T06:04:32.129Z,1509689072.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:32.483Z,1509689072.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:32.882Z,1509689072.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:33.277Z,1509689073.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:33.679Z,1509689073.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:34.082Z,1509689074.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:34.485Z,1509689074.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:34.863Z,1509689074.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:35.259Z,1509689075.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:35.687Z,1509689075.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:36.084Z,1509689076.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:36.539Z,1509689076.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:36.863Z,1509689076.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:37.310Z,1509689077.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:37.669Z,1509689077.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:38.062Z,1509689078.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:38.507Z,1509689078.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:38.890Z,1509689078.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:39.307Z,1509689079.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:39.707Z,1509689079.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:40.071Z,1509689080.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:40.483Z,1509689080.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:40.863Z,1509689080.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:41.267Z,1509689081.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:41.668Z,1509689081.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:42.087Z,1509689082.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:42.471Z,1509689082.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:42.860Z,1509689082.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:43.262Z,1509689083.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:43.687Z,1509689083.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:44.069Z,1509689084.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:44.469Z,1509689084.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:44.716Z,1509689084.716 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:04:44.716Z,1509689084.716 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T06:04:44.716Z,1509689084.716 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:04:44.889Z,1509689084.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:04:44.890Z,1509689084.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:44.984Z,1509689084.984 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:04:45.120Z,1509689085.120 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:04:45.221Z,1509689085.221 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:04:45.291Z,1509689085.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:04:45.293Z,1509689085.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:45.665Z,1509689085.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:04:45.666Z,1509689085.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:46.066Z,1509689086.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:04:46.067Z,1509689086.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:46.459Z,1509689086.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:04:46.460Z,1509689086.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:46.548Z,1509689086.548 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:04:46.549Z,1509689086.549 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T06:04:46.845Z,1509689086.845 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:04:46.845Z,1509689086.845 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:04:46.845Z,1509689086.845 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:04:46.845Z,1509689086.845 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:04:46.903Z,1509689086.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:04:46.905Z,1509689086.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:47.270Z,1509689087.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:04:47.271Z,1509689087.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:47.669Z,1509689087.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:04:47.670Z,1509689087.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:48.067Z,1509689088.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:04:48.068Z,1509689088.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:48.490Z,1509689088.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:04:48.491Z,1509689088.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:48.864Z,1509689088.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:04:48.866Z,1509689088.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:49.265Z,1509689089.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:04:49.266Z,1509689089.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:49.670Z,1509689089.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:04:49.671Z,1509689089.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:50.083Z,1509689090.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:04:50.084Z,1509689090.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:50.489Z,1509689090.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:04:50.490Z,1509689090.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:50.867Z,1509689090.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:04:50.869Z,1509689090.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:51.016Z,1509689091.016 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:04:51.072Z,1509689091.072 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:04:51.073Z,1509689091.073 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:04:51.074Z,1509689091.074 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:04:51.074Z,1509689091.074 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:04:51.295Z,1509689091.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:04:51.296Z,1509689091.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:51.743Z,1509689091.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:52.075Z,1509689092.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:52.486Z,1509689092.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:52.910Z,1509689092.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:53.281Z,1509689093.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:53.711Z,1509689093.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:53.711Z,1509689093.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 117
2017-11-03T06:04:53.711Z,1509689093.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:04:53.713Z,1509689093.713 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:53.713Z,1509689093.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 117
2017-11-03T06:04:53.713Z,1509689093.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:04:53.715Z,1509689093.715 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:53.715Z,1509689093.715 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117
2017-11-03T06:04:53.715Z,1509689093.715 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:04:53.805Z,1509689093.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:04:53.805Z,1509689093.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:04:53.805Z,1509689093.805 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:04:54.202Z,1509689094.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:04:54.202Z,1509689094.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 117
2017-11-03T06:04:54.202Z,1509689094.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:04:54.202Z,1509689094.202 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 117
2017-11-03T06:04:54.203Z,1509689094.203 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:04:54.203Z,1509689094.203 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117
2017-11-03T06:04:54.486Z,1509689094.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:04:54.487Z,1509689094.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:04:54.487Z,1509689094.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:04:54.488Z,1509689094.488 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:04:54.488Z,1509689094.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:04:54.489Z,1509689094.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:04:54.489Z,1509689094.489 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:04:54.489Z,1509689094.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:04:54.490Z,1509689094.490 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:04:54.879Z,1509689094.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:55.251Z,1509689095.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:55.677Z,1509689095.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:56.055Z,1509689096.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:56.484Z,1509689096.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:56.882Z,1509689096.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:57.283Z,1509689097.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:57.686Z,1509689097.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:58.099Z,1509689098.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:58.481Z,1509689098.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:58.860Z,1509689098.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:59.259Z,1509689099.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:04:59.691Z,1509689099.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:00.083Z,1509689100.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:00.483Z,1509689100.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:00.904Z,1509689100.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:01.290Z,1509689101.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:01.655Z,1509689101.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:02.059Z,1509689102.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:02.482Z,1509689102.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:02.904Z,1509689102.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:03.284Z,1509689103.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:03.686Z,1509689103.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:04.050Z,1509689104.050 [PNI_TCM](ERROR): CRC does not match. Expected:0x15198 got:0x2935
2017-11-03T06:05:04.090Z,1509689104.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:04.485Z,1509689104.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:04.900Z,1509689104.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:05.287Z,1509689105.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:05.673Z,1509689105.673 [PNI_TCM](ERROR): CRC does not match. Expected:0x12554 got:0x56832
2017-11-03T06:05:05.699Z,1509689105.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:08.977Z,1509689108.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:09.180Z,1509689109.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:09.583Z,1509689109.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:09.947Z,1509689109.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:10.383Z,1509689110.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:10.794Z,1509689110.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:11.188Z,1509689111.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:11.559Z,1509689111.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:11.941Z,1509689111.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:12.343Z,1509689112.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:12.747Z,1509689112.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:13.142Z,1509689113.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:13.549Z,1509689113.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:13.952Z,1509689113.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:14.358Z,1509689114.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:14.742Z,1509689114.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:15.140Z,1509689115.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:15.539Z,1509689115.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:15.939Z,1509689115.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:16.351Z,1509689116.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:16.749Z,1509689116.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:17.160Z,1509689117.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:17.553Z,1509689117.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:17.934Z,1509689117.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:18.335Z,1509689118.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:18.756Z,1509689118.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:19.141Z,1509689119.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:19.546Z,1509689119.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:19.946Z,1509689119.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:20.344Z,1509689120.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:20.741Z,1509689120.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:21.138Z,1509689121.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:21.543Z,1509689121.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:21.942Z,1509689121.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:22.347Z,1509689122.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:22.822Z,1509689122.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:23.155Z,1509689123.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:23.590Z,1509689123.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:23.948Z,1509689123.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:24.363Z,1509689124.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:24.767Z,1509689124.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:25.174Z,1509689125.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:25.557Z,1509689125.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:25.952Z,1509689125.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:26.353Z,1509689126.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:26.748Z,1509689126.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:27.128Z,1509689127.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:27.529Z,1509689127.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:27.948Z,1509689127.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:28.351Z,1509689128.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:28.752Z,1509689128.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:29.163Z,1509689129.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:29.558Z,1509689129.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:29.949Z,1509689129.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:30.350Z,1509689130.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:30.750Z,1509689130.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:31.136Z,1509689131.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:31.544Z,1509689131.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:31.944Z,1509689131.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:32.346Z,1509689132.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:32.741Z,1509689132.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:33.151Z,1509689133.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:33.543Z,1509689133.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:33.939Z,1509689133.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:34.339Z,1509689134.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:34.744Z,1509689134.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:35.148Z,1509689135.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:35.544Z,1509689135.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:35.939Z,1509689135.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:36.341Z,1509689136.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:36.790Z,1509689136.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:37.151Z,1509689137.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:37.598Z,1509689137.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:37.948Z,1509689137.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:38.374Z,1509689138.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:38.741Z,1509689138.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:39.203Z,1509689139.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:39.586Z,1509689139.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:39.943Z,1509689139.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:40.341Z,1509689140.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:40.751Z,1509689140.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:41.149Z,1509689141.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:41.577Z,1509689141.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:41.939Z,1509689141.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:42.335Z,1509689142.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:42.740Z,1509689142.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:43.140Z,1509689143.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:43.548Z,1509689143.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:43.948Z,1509689143.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:44.350Z,1509689144.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:44.742Z,1509689144.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:45.130Z,1509689145.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:45.531Z,1509689145.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:45.950Z,1509689145.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:46.334Z,1509689146.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:46.762Z,1509689146.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:47.162Z,1509689147.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:47.563Z,1509689147.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:47.939Z,1509689147.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:48.335Z,1509689148.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:48.736Z,1509689148.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:49.165Z,1509689149.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:49.562Z,1509689149.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:49.963Z,1509689149.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:50.362Z,1509689150.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:50.738Z,1509689150.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:51.162Z,1509689151.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:51.598Z,1509689151.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:51.943Z,1509689151.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:52.371Z,1509689152.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:52.743Z,1509689152.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:53.222Z,1509689153.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:53.545Z,1509689153.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:53.971Z,1509689153.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:54.338Z,1509689154.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:54.741Z,1509689154.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:55.143Z,1509689155.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:55.549Z,1509689155.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:55.949Z,1509689155.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:56.351Z,1509689156.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:56.738Z,1509689156.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:57.139Z,1509689157.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:57.538Z,1509689157.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:57.942Z,1509689157.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:58.339Z,1509689158.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:58.743Z,1509689158.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:59.150Z,1509689159.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:59.559Z,1509689159.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:05:59.959Z,1509689159.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:00.354Z,1509689160.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:00.754Z,1509689160.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:01.173Z,1509689161.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:01.575Z,1509689161.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:01.971Z,1509689161.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:02.365Z,1509689162.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:02.745Z,1509689162.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:03.168Z,1509689163.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:03.567Z,1509689163.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:03.938Z,1509689163.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:04.361Z,1509689164.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:04.823Z,1509689164.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:04.833Z,1509689164.833 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T06:06:04.834Z,1509689164.834 [Default:CheckIn:C.Wait] Stopped
2017-11-03T06:06:04.834Z,1509689164.834 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T06:06:04.834Z,1509689164.834 [Default:CheckIn:D] Running Loop=1
2017-11-03T06:06:05.184Z,1509689165.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:05.191Z,1509689165.191 [Default:CheckIn:D] Stopped
2017-11-03T06:06:05.191Z,1509689165.191 [Default:CheckIn:E] Running Loop=1
2017-11-03T06:06:05.583Z,1509689165.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:05.591Z,1509689165.591 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 350.960417 min 
2017-11-03T06:06:05.591Z,1509689165.591 [Default:CheckIn:E] Stopped
2017-11-03T06:06:05.591Z,1509689165.591 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T06:06:05.591Z,1509689165.591 [Default:CheckIn] Stopped
2017-11-03T06:06:05.592Z,1509689165.592 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T06:06:05.592Z,1509689165.592 [Default:CheckIn](INFO): Running loop #35
2017-11-03T06:06:05.592Z,1509689165.592 [Default:CheckIn] Running Loop=35
2017-11-03T06:06:05.592Z,1509689165.592 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T06:06:05.592Z,1509689165.592 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T06:06:06.081Z,1509689166.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:12.887Z,1509689172.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:13.067Z,1509689173.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:13.494Z,1509689173.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:13.871Z,1509689173.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:14.303Z,1509689174.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:14.698Z,1509689174.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:15.051Z,1509689175.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:15.464Z,1509689175.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:15.892Z,1509689175.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:16.263Z,1509689176.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:16.667Z,1509689176.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:17.063Z,1509689177.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:17.501Z,1509689177.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:17.852Z,1509689177.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:18.231Z,1509689178.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:18.649Z,1509689178.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:19.050Z,1509689179.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:19.452Z,1509689179.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:19.853Z,1509689179.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:20.253Z,1509689180.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:20.652Z,1509689180.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:21.031Z,1509689181.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:21.460Z,1509689181.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:21.860Z,1509689181.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:22.267Z,1509689182.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:22.632Z,1509689182.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:23.031Z,1509689183.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:23.469Z,1509689183.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:23.835Z,1509689183.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:24.231Z,1509689184.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:24.661Z,1509689184.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:25.059Z,1509689185.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:25.471Z,1509689185.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:25.833Z,1509689185.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:26.232Z,1509689186.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:26.679Z,1509689186.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:27.082Z,1509689187.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:27.465Z,1509689187.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:27.865Z,1509689187.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:28.287Z,1509689188.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:28.635Z,1509689188.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:29.071Z,1509689189.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:29.483Z,1509689189.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:29.848Z,1509689189.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:30.266Z,1509689190.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:30.635Z,1509689190.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:31.039Z,1509689191.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:31.445Z,1509689191.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:31.852Z,1509689191.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:32.244Z,1509689192.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:32.638Z,1509689192.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:33.038Z,1509689193.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:33.452Z,1509689193.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:33.844Z,1509689193.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:34.252Z,1509689194.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:34.639Z,1509689194.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:35.039Z,1509689195.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:35.435Z,1509689195.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:35.881Z,1509689195.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:36.246Z,1509689196.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:36.657Z,1509689196.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:37.051Z,1509689197.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:37.462Z,1509689197.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:37.843Z,1509689197.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:38.247Z,1509689198.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:38.644Z,1509689198.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:39.045Z,1509689199.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:39.465Z,1509689199.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:39.855Z,1509689199.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:40.257Z,1509689200.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:40.647Z,1509689200.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:41.050Z,1509689201.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:41.530Z,1509689201.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:41.853Z,1509689201.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:42.249Z,1509689202.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:42.687Z,1509689202.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:43.067Z,1509689203.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:43.490Z,1509689203.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:43.887Z,1509689203.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:44.252Z,1509689204.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:44.642Z,1509689204.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:45.045Z,1509689205.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:45.452Z,1509689205.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:45.854Z,1509689205.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:46.257Z,1509689206.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:46.644Z,1509689206.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:46.931Z,1509689206.931 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:06:46.931Z,1509689206.931 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T06:06:46.931Z,1509689206.931 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:06:47.034Z,1509689207.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:06:47.035Z,1509689207.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:47.113Z,1509689207.113 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:06:47.332Z,1509689207.332 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:06:47.459Z,1509689207.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:06:47.460Z,1509689207.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:47.500Z,1509689207.500 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:06:47.845Z,1509689207.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:06:47.846Z,1509689207.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:48.250Z,1509689208.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:06:48.251Z,1509689208.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:48.642Z,1509689208.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:06:48.643Z,1509689208.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:48.745Z,1509689208.745 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:06:48.745Z,1509689208.745 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T06:06:49.084Z,1509689209.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:06:49.085Z,1509689209.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:49.117Z,1509689209.117 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:06:49.117Z,1509689209.117 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:06:49.118Z,1509689209.118 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:06:49.118Z,1509689209.118 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:06:49.450Z,1509689209.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:06:49.451Z,1509689209.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:49.844Z,1509689209.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:06:49.845Z,1509689209.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:50.244Z,1509689210.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:06:50.245Z,1509689210.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:50.638Z,1509689210.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:06:50.639Z,1509689210.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:51.041Z,1509689211.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:06:51.042Z,1509689211.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:51.444Z,1509689211.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:06:51.445Z,1509689211.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:51.842Z,1509689211.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:06:51.843Z,1509689211.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:52.248Z,1509689212.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:06:52.249Z,1509689212.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:52.642Z,1509689212.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:06:52.643Z,1509689212.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:53.038Z,1509689213.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:06:53.039Z,1509689213.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:53.240Z,1509689213.240 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:06:53.303Z,1509689213.303 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:06:53.304Z,1509689213.304 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:06:53.314Z,1509689213.314 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:06:53.314Z,1509689213.314 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:06:53.456Z,1509689213.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:06:53.479Z,1509689213.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:53.845Z,1509689213.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:54.245Z,1509689214.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:54.643Z,1509689214.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:55.041Z,1509689215.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:55.444Z,1509689215.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:55.845Z,1509689215.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:56.294Z,1509689216.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:56.641Z,1509689216.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:57.078Z,1509689217.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:57.449Z,1509689217.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:57.879Z,1509689217.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:58.279Z,1509689218.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:58.643Z,1509689218.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:59.040Z,1509689219.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:59.451Z,1509689219.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:06:59.846Z,1509689219.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:00.331Z,1509689220.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:00.644Z,1509689220.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:01.047Z,1509689221.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:01.452Z,1509689221.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:01.856Z,1509689221.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:02.255Z,1509689222.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:02.641Z,1509689222.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:03.040Z,1509689223.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:03.447Z,1509689223.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:03.843Z,1509689223.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:04.247Z,1509689224.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:04.651Z,1509689224.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:05.057Z,1509689225.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:05.453Z,1509689225.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:05.841Z,1509689225.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:06.254Z,1509689226.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:09.591Z,1509689229.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:09.742Z,1509689229.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:10.194Z,1509689230.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:10.550Z,1509689230.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:11.007Z,1509689231.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:11.340Z,1509689231.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:11.788Z,1509689231.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:12.186Z,1509689232.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:12.548Z,1509689232.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:12.954Z,1509689232.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:13.349Z,1509689233.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:13.741Z,1509689233.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:14.141Z,1509689234.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:14.541Z,1509689234.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:14.943Z,1509689234.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:15.403Z,1509689235.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:15.759Z,1509689235.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:16.158Z,1509689236.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:16.557Z,1509689236.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:16.935Z,1509689236.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:17.378Z,1509689237.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:17.739Z,1509689237.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:18.135Z,1509689238.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:18.546Z,1509689238.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:18.969Z,1509689238.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:19.344Z,1509689239.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:19.736Z,1509689239.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:20.141Z,1509689240.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:20.543Z,1509689240.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:20.947Z,1509689240.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:21.337Z,1509689241.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:21.744Z,1509689241.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:22.150Z,1509689242.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:22.545Z,1509689242.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:22.987Z,1509689242.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:23.343Z,1509689243.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:23.741Z,1509689243.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:24.186Z,1509689244.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:24.548Z,1509689244.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:24.990Z,1509689244.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:25.386Z,1509689245.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:25.737Z,1509689245.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:26.182Z,1509689246.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:26.582Z,1509689246.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:26.937Z,1509689246.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:27.339Z,1509689247.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:27.750Z,1509689247.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:28.151Z,1509689248.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:28.549Z,1509689248.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:28.937Z,1509689248.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:29.396Z,1509689249.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:29.740Z,1509689249.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:30.138Z,1509689250.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:30.549Z,1509689250.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:30.953Z,1509689250.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:31.438Z,1509689251.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:31.737Z,1509689251.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:32.139Z,1509689252.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:32.539Z,1509689252.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:32.937Z,1509689252.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:33.347Z,1509689253.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:33.749Z,1509689253.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:34.149Z,1509689254.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:34.555Z,1509689254.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:34.947Z,1509689254.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:35.343Z,1509689255.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:35.741Z,1509689255.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:36.139Z,1509689256.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:36.554Z,1509689256.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:36.977Z,1509689256.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:37.396Z,1509689257.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:37.737Z,1509689257.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:38.141Z,1509689258.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:38.537Z,1509689258.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:39.012Z,1509689259.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:39.339Z,1509689259.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:39.778Z,1509689259.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:40.149Z,1509689260.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:40.583Z,1509689260.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:40.979Z,1509689260.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:41.336Z,1509689261.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:41.738Z,1509689261.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:42.138Z,1509689262.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:42.555Z,1509689262.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:42.953Z,1509689262.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:43.398Z,1509689263.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:43.741Z,1509689263.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:44.141Z,1509689264.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:44.547Z,1509689264.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:44.939Z,1509689264.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:45.401Z,1509689265.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:45.751Z,1509689265.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:46.148Z,1509689266.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:46.554Z,1509689266.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:46.935Z,1509689266.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:47.347Z,1509689267.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:47.739Z,1509689267.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:48.147Z,1509689268.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:48.548Z,1509689268.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:48.952Z,1509689268.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:49.349Z,1509689269.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:49.739Z,1509689269.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:50.142Z,1509689270.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:50.547Z,1509689270.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:50.947Z,1509689270.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:51.339Z,1509689271.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:51.794Z,1509689271.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:52.152Z,1509689272.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:52.554Z,1509689272.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:53.007Z,1509689273.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:53.337Z,1509689273.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:53.780Z,1509689273.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:54.137Z,1509689274.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:54.583Z,1509689274.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:54.583Z,1509689274.583 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 118
2017-11-03T06:07:54.583Z,1509689274.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:07:54.585Z,1509689274.585 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:54.585Z,1509689274.585 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 118
2017-11-03T06:07:54.585Z,1509689274.585 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:07:54.587Z,1509689274.587 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:54.587Z,1509689274.587 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118
2017-11-03T06:07:54.587Z,1509689274.587 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:07:54.677Z,1509689274.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:07:54.677Z,1509689274.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:07:54.677Z,1509689274.677 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:07:55.029Z,1509689275.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:07:55.029Z,1509689275.029 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 118
2017-11-03T06:07:55.029Z,1509689275.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:07:55.029Z,1509689275.029 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 118
2017-11-03T06:07:55.030Z,1509689275.030 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:07:55.030Z,1509689275.030 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118
2017-11-03T06:07:55.373Z,1509689275.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:07:55.374Z,1509689275.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:07:55.374Z,1509689275.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:07:55.375Z,1509689275.375 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:07:55.375Z,1509689275.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:07:55.375Z,1509689275.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:07:55.376Z,1509689275.376 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:07:55.376Z,1509689275.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:07:55.377Z,1509689275.377 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:07:55.730Z,1509689275.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:56.134Z,1509689276.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:56.532Z,1509689276.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:56.931Z,1509689276.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:57.375Z,1509689277.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:57.744Z,1509689277.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:58.143Z,1509689278.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:58.545Z,1509689278.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:58.936Z,1509689278.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:59.387Z,1509689279.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:07:59.738Z,1509689279.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:00.143Z,1509689280.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:00.543Z,1509689280.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:00.969Z,1509689280.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:01.351Z,1509689281.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:01.742Z,1509689281.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:02.142Z,1509689282.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:02.537Z,1509689282.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:02.942Z,1509689282.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:03.343Z,1509689283.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:03.744Z,1509689283.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:04.145Z,1509689284.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:04.545Z,1509689284.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:04.944Z,1509689284.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:05.342Z,1509689285.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:05.738Z,1509689285.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:06.186Z,1509689286.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:06.544Z,1509689286.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:09.831Z,1509689289.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:10.021Z,1509689290.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:10.422Z,1509689290.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:10.781Z,1509689290.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:11.223Z,1509689291.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:11.603Z,1509689291.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:11.992Z,1509689291.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:12.391Z,1509689292.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:12.778Z,1509689292.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:13.180Z,1509689293.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:13.587Z,1509689293.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:13.977Z,1509689293.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:14.375Z,1509689294.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:14.784Z,1509689294.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:15.191Z,1509689295.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:15.593Z,1509689295.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:15.983Z,1509689295.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:16.384Z,1509689296.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:16.785Z,1509689296.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:17.185Z,1509689297.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:17.589Z,1509689297.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:17.992Z,1509689297.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:18.387Z,1509689298.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:18.786Z,1509689298.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:19.182Z,1509689299.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:19.583Z,1509689299.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:19.982Z,1509689299.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:20.377Z,1509689300.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:20.781Z,1509689300.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:21.186Z,1509689301.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:21.580Z,1509689301.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:21.975Z,1509689301.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:22.391Z,1509689302.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:22.777Z,1509689302.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:23.179Z,1509689303.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:23.594Z,1509689303.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:23.987Z,1509689303.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:24.389Z,1509689304.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:24.782Z,1509689304.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:25.178Z,1509689305.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:25.579Z,1509689305.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:25.987Z,1509689305.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:26.376Z,1509689306.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:26.781Z,1509689306.781 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:08:26.781Z,1509689306.781 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:08:26.781Z,1509689306.781 [BPC1](ERROR): Communications Fault
2017-11-03T06:08:26.789Z,1509689306.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:26.884Z,1509689306.884 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:08:27.187Z,1509689307.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:27.593Z,1509689307.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:27.975Z,1509689307.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:28.072Z,1509689308.072 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:08:28.073Z,1509689308.073 [BPC1] No Fault, FailCount= 1
2017-11-03T06:08:28.434Z,1509689308.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:28.783Z,1509689308.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:29.180Z,1509689309.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:29.589Z,1509689309.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:29.989Z,1509689309.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:30.388Z,1509689310.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:30.782Z,1509689310.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:31.167Z,1509689311.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:31.588Z,1509689311.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:31.966Z,1509689311.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:32.368Z,1509689312.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:32.856Z,1509689312.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:33.195Z,1509689313.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:33.599Z,1509689313.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:33.993Z,1509689313.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:34.370Z,1509689314.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:34.772Z,1509689314.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:35.171Z,1509689315.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:35.601Z,1509689315.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:36.001Z,1509689316.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:36.401Z,1509689316.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:36.771Z,1509689316.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:37.180Z,1509689317.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:37.575Z,1509689317.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:37.971Z,1509689317.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:38.375Z,1509689318.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:38.802Z,1509689318.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:39.180Z,1509689319.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:39.581Z,1509689319.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:39.975Z,1509689319.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:40.376Z,1509689320.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:40.776Z,1509689320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:41.181Z,1509689321.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:41.577Z,1509689321.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:42.002Z,1509689322.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:42.401Z,1509689322.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:42.776Z,1509689322.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:43.179Z,1509689323.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:43.626Z,1509689323.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:43.982Z,1509689323.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:44.381Z,1509689324.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:44.853Z,1509689324.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:45.192Z,1509689325.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:45.631Z,1509689325.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:46.003Z,1509689326.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:46.384Z,1509689326.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:46.785Z,1509689326.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:47.190Z,1509689327.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:47.594Z,1509689327.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:47.989Z,1509689327.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:48.389Z,1509689328.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:48.765Z,1509689328.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:49.171Z,1509689329.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:49.571Z,1509689329.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:49.728Z,1509689329.728 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:08:49.728Z,1509689329.728 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T06:08:49.728Z,1509689329.728 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:08:49.991Z,1509689329.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:08:49.992Z,1509689329.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:50.079Z,1509689330.079 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:08:50.133Z,1509689330.133 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:08:50.221Z,1509689330.221 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:08:50.389Z,1509689330.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:08:50.390Z,1509689330.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:50.795Z,1509689330.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:08:50.796Z,1509689330.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:51.194Z,1509689331.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:08:51.195Z,1509689331.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:51.588Z,1509689331.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:08:51.589Z,1509689331.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:51.678Z,1509689331.678 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:08:51.678Z,1509689331.678 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T06:08:51.836Z,1509689331.836 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:08:51.837Z,1509689331.837 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:08:51.837Z,1509689331.837 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:08:51.837Z,1509689331.837 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:08:51.974Z,1509689331.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:08:51.975Z,1509689331.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:52.378Z,1509689332.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:08:52.379Z,1509689332.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:52.773Z,1509689332.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:08:52.774Z,1509689332.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:53.170Z,1509689333.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:08:53.171Z,1509689333.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:53.597Z,1509689333.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:08:53.598Z,1509689333.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:53.997Z,1509689333.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:08:53.998Z,1509689333.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:54.398Z,1509689334.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:08:54.399Z,1509689334.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:54.773Z,1509689334.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:08:54.774Z,1509689334.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:55.170Z,1509689335.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:08:55.171Z,1509689335.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:55.571Z,1509689335.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:08:55.572Z,1509689335.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:55.999Z,1509689335.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:08:56.000Z,1509689336.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:56.068Z,1509689336.068 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:08:56.159Z,1509689336.159 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:08:56.160Z,1509689336.160 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:08:56.162Z,1509689336.162 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:08:56.162Z,1509689336.162 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:08:56.448Z,1509689336.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T06:08:56.450Z,1509689336.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:56.840Z,1509689336.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:57.186Z,1509689337.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:57.587Z,1509689337.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:58.011Z,1509689338.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:58.371Z,1509689338.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:58.814Z,1509689338.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:59.214Z,1509689339.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:59.580Z,1509689339.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:08:59.987Z,1509689339.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:00.383Z,1509689340.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:00.775Z,1509689340.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:01.178Z,1509689341.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:01.576Z,1509689341.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:01.975Z,1509689341.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:02.372Z,1509689342.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:02.782Z,1509689342.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:03.184Z,1509689343.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:03.579Z,1509689343.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:03.974Z,1509689343.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:04.375Z,1509689344.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:04.772Z,1509689344.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:05.175Z,1509689345.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:05.580Z,1509689345.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:05.987Z,1509689345.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:06.381Z,1509689346.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:06.775Z,1509689346.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:10.102Z,1509689350.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:10.283Z,1509689350.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:10.730Z,1509689350.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:11.101Z,1509689351.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:11.519Z,1509689351.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:11.914Z,1509689351.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:12.275Z,1509689352.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:12.676Z,1509689352.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:13.131Z,1509689353.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:13.505Z,1509689353.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:13.903Z,1509689353.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:14.302Z,1509689354.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:14.686Z,1509689354.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:15.085Z,1509689355.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:15.487Z,1509689355.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:15.910Z,1509689355.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:16.286Z,1509689356.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:16.696Z,1509689356.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:17.150Z,1509689357.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:17.495Z,1509689357.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:17.933Z,1509689357.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:18.289Z,1509689358.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:18.686Z,1509689358.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:19.084Z,1509689359.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:19.501Z,1509689359.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:19.936Z,1509689359.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:20.296Z,1509689360.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:20.688Z,1509689360.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:21.088Z,1509689361.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:21.486Z,1509689361.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:21.943Z,1509689361.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:22.315Z,1509689362.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:22.697Z,1509689362.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:23.101Z,1509689363.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:23.496Z,1509689363.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:23.894Z,1509689363.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:24.311Z,1509689364.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:24.687Z,1509689364.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:25.107Z,1509689365.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:25.533Z,1509689365.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:25.900Z,1509689365.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:26.296Z,1509689366.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:26.682Z,1509689366.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:27.103Z,1509689367.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:27.483Z,1509689367.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:27.883Z,1509689367.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:28.283Z,1509689368.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:28.707Z,1509689368.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:29.104Z,1509689369.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:29.507Z,1509689369.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:29.923Z,1509689369.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:30.280Z,1509689370.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:30.680Z,1509689370.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:31.079Z,1509689371.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:31.503Z,1509689371.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:31.928Z,1509689371.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:32.307Z,1509689372.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:32.683Z,1509689372.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:33.079Z,1509689373.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:33.474Z,1509689373.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:33.932Z,1509689373.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:34.283Z,1509689374.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:34.703Z,1509689374.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:35.109Z,1509689375.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:35.507Z,1509689375.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:35.971Z,1509689375.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:36.323Z,1509689376.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:36.683Z,1509689376.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:37.082Z,1509689377.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:37.539Z,1509689377.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:37.909Z,1509689377.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:38.309Z,1509689378.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:38.715Z,1509689378.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:39.083Z,1509689379.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:39.515Z,1509689379.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:39.911Z,1509689379.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:40.287Z,1509689380.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:40.699Z,1509689380.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:41.101Z,1509689381.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:41.497Z,1509689381.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:41.893Z,1509689381.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:42.288Z,1509689382.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:42.687Z,1509689382.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:43.084Z,1509689383.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:43.511Z,1509689383.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:43.923Z,1509689383.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:44.310Z,1509689384.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:44.684Z,1509689384.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:45.085Z,1509689385.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:45.484Z,1509689385.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:45.928Z,1509689385.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:46.284Z,1509689386.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:46.689Z,1509689386.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:47.112Z,1509689387.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:47.511Z,1509689387.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:47.915Z,1509689387.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:48.284Z,1509689388.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:48.684Z,1509689388.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:49.083Z,1509689389.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:49.510Z,1509689389.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:49.963Z,1509689389.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:50.289Z,1509689390.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:50.684Z,1509689390.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:51.130Z,1509689391.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:51.484Z,1509689391.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:51.884Z,1509689391.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:52.287Z,1509689392.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:52.715Z,1509689392.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:53.110Z,1509689393.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:53.535Z,1509689393.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:53.883Z,1509689393.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:54.326Z,1509689394.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:54.719Z,1509689394.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:55.087Z,1509689395.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:55.493Z,1509689395.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:55.899Z,1509689395.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:56.288Z,1509689396.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:56.687Z,1509689396.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:57.085Z,1509689397.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:57.487Z,1509689397.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:57.927Z,1509689397.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:58.288Z,1509689398.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:58.702Z,1509689398.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:59.102Z,1509689399.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:59.491Z,1509689399.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:09:59.904Z,1509689399.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:00.279Z,1509689400.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:00.687Z,1509689400.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:01.087Z,1509689401.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:01.500Z,1509689401.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:01.930Z,1509689401.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:02.299Z,1509689402.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:02.679Z,1509689402.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:03.102Z,1509689403.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:03.488Z,1509689403.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:03.955Z,1509689403.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:04.287Z,1509689404.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:04.696Z,1509689404.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:05.154Z,1509689405.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:05.496Z,1509689405.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:05.893Z,1509689405.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:06.319Z,1509689406.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:06.693Z,1509689406.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:07.093Z,1509689407.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:10.311Z,1509689410.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:10.495Z,1509689410.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:10.919Z,1509689410.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:11.318Z,1509689411.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:11.698Z,1509689411.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:12.067Z,1509689412.067 [PNI_TCM](ERROR): CRC does not match. Expected:0x6759 got:0x45580
2017-11-03T06:10:12.095Z,1509689412.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:12.479Z,1509689412.479 [PNI_TCM](ERROR): CRC does not match. Expected:0x62962 got:0x170
2017-11-03T06:10:12.515Z,1509689412.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:12.887Z,1509689412.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:13.287Z,1509689413.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:13.677Z,1509689413.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:14.075Z,1509689414.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:14.479Z,1509689414.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:14.877Z,1509689414.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:15.287Z,1509689415.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:15.686Z,1509689415.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:16.103Z,1509689416.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:16.502Z,1509689416.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:16.883Z,1509689416.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:17.279Z,1509689417.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:17.678Z,1509689417.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:18.086Z,1509689418.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:18.499Z,1509689418.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:18.885Z,1509689418.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:19.285Z,1509689419.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:19.695Z,1509689419.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:20.097Z,1509689420.097 [PNI_TCM](ERROR): CRC does not match. Expected:0x32100 got:0x45576
2017-11-03T06:10:20.153Z,1509689420.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:20.477Z,1509689420.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:20.887Z,1509689420.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:21.294Z,1509689421.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:21.689Z,1509689421.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:22.141Z,1509689422.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:22.527Z,1509689422.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:22.927Z,1509689422.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:23.286Z,1509689423.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:23.678Z,1509689423.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:24.123Z,1509689424.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:24.494Z,1509689424.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:24.922Z,1509689424.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:25.322Z,1509689425.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:25.679Z,1509689425.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:26.087Z,1509689426.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:26.487Z,1509689426.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:26.881Z,1509689426.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:27.285Z,1509689427.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:27.699Z,1509689427.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:28.096Z,1509689428.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:28.488Z,1509689428.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:28.854Z,1509689428.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:28.878Z,1509689428.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:29.249Z,1509689429.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:29.298Z,1509689429.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:29.652Z,1509689429.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:29.693Z,1509689429.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:30.055Z,1509689430.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:30.079Z,1509689430.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:30.462Z,1509689430.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:30.477Z,1509689430.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:30.857Z,1509689430.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:30.896Z,1509689430.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:31.264Z,1509689431.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:31.280Z,1509689431.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:31.658Z,1509689431.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:31.674Z,1509689431.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:32.059Z,1509689432.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:32.074Z,1509689432.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:32.455Z,1509689432.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:32.498Z,1509689432.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:32.867Z,1509689432.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:32.882Z,1509689432.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:33.260Z,1509689433.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:33.275Z,1509689433.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:33.663Z,1509689433.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:33.682Z,1509689433.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:34.092Z,1509689434.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:34.133Z,1509689434.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:34.466Z,1509689434.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:34.482Z,1509689434.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:34.862Z,1509689434.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:34.877Z,1509689434.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:35.263Z,1509689435.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:35.278Z,1509689435.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:35.658Z,1509689435.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:35.699Z,1509689435.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:36.057Z,1509689436.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:36.126Z,1509689436.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:36.474Z,1509689436.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:36.489Z,1509689436.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:36.867Z,1509689436.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:36.887Z,1509689436.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:37.264Z,1509689437.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:37.334Z,1509689437.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:37.663Z,1509689437.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:37.671Z,1509689437.671 [PNI_TCM](ERROR): CRC does not match. Expected:0x4771 got:0x52932
2017-11-03T06:10:37.707Z,1509689437.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:38.054Z,1509689438.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:38.074Z,1509689438.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:38.469Z,1509689438.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:38.515Z,1509689438.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:38.859Z,1509689438.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:38.905Z,1509689438.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:39.262Z,1509689439.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:39.315Z,1509689439.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:39.668Z,1509689439.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:39.723Z,1509689439.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:40.059Z,1509689440.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:40.101Z,1509689440.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:40.464Z,1509689440.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:40.510Z,1509689440.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:40.858Z,1509689440.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:40.868Z,1509689440.868 [PNI_TCM](ERROR): CRC does not match. Expected:0x44654 got:0x48917
2017-11-03T06:10:40.910Z,1509689440.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:41.264Z,1509689441.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:41.271Z,1509689441.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x17231 got:0x1857
2017-11-03T06:10:41.307Z,1509689441.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:41.665Z,1509689441.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:41.681Z,1509689441.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:42.054Z,1509689442.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:42.087Z,1509689442.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:42.467Z,1509689442.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:42.487Z,1509689442.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:42.869Z,1509689442.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:42.884Z,1509689442.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:43.266Z,1509689443.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:43.282Z,1509689443.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:43.654Z,1509689443.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:43.687Z,1509689443.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:44.063Z,1509689444.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:44.079Z,1509689444.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:44.458Z,1509689444.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:44.478Z,1509689444.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:44.858Z,1509689444.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:44.873Z,1509689444.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:45.254Z,1509689445.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:45.287Z,1509689445.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:45.668Z,1509689445.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:45.684Z,1509689445.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:46.069Z,1509689446.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:46.085Z,1509689446.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:46.467Z,1509689446.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:46.487Z,1509689446.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:46.859Z,1509689446.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:46.906Z,1509689446.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:47.263Z,1509689447.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:47.279Z,1509689447.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:47.664Z,1509689447.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:47.680Z,1509689447.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:48.065Z,1509689448.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:48.146Z,1509689448.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:48.478Z,1509689448.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:48.493Z,1509689448.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:48.877Z,1509689448.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:48.899Z,1509689448.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:49.271Z,1509689449.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:49.286Z,1509689449.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:49.651Z,1509689449.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:49.678Z,1509689449.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:50.047Z,1509689450.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:50.089Z,1509689450.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:50.470Z,1509689450.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:50.485Z,1509689450.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:50.855Z,1509689450.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:50.882Z,1509689450.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:51.247Z,1509689451.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:51.282Z,1509689451.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:51.674Z,1509689451.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:51.707Z,1509689451.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:51.992Z,1509689451.992 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:10:51.992Z,1509689451.992 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T06:10:51.992Z,1509689451.992 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:10:52.082Z,1509689452.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:52.097Z,1509689452.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:10:52.098Z,1509689452.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:52.173Z,1509689452.173 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:10:52.174Z,1509689452.174 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T06:10:52.397Z,1509689452.397 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:10:52.489Z,1509689452.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:52.543Z,1509689452.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:10:52.548Z,1509689452.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:52.605Z,1509689452.605 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:10:52.853Z,1509689452.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:52.880Z,1509689452.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:10:52.881Z,1509689452.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:53.245Z,1509689453.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:53.290Z,1509689453.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:10:53.291Z,1509689453.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:53.652Z,1509689453.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:53.687Z,1509689453.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:10:53.688Z,1509689453.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:54.050Z,1509689454.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:54.066Z,1509689454.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:10:54.067Z,1509689454.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:54.469Z,1509689454.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:54.498Z,1509689454.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:10:54.499Z,1509689454.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:54.861Z,1509689454.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:54.883Z,1509689454.883 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:10:54.883Z,1509689454.883 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:10:54.883Z,1509689454.883 [BPC1](ERROR): Communications Fault
2017-11-03T06:10:54.892Z,1509689454.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:10:54.893Z,1509689454.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:54.981Z,1509689454.981 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:10:55.267Z,1509689455.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:55.281Z,1509689455.281 [PNI_TCM](ERROR): CRC does not match. Expected:0x55997 got:0x2302
2017-11-03T06:10:55.299Z,1509689455.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:10:55.300Z,1509689455.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:55.649Z,1509689455.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:55.665Z,1509689455.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:10:55.666Z,1509689455.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:55.666Z,1509689455.666 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 119
2017-11-03T06:10:55.667Z,1509689455.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:10:55.669Z,1509689455.669 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:55.669Z,1509689455.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 119
2017-11-03T06:10:55.669Z,1509689455.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:10:55.671Z,1509689455.671 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:55.671Z,1509689455.671 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119
2017-11-03T06:10:55.671Z,1509689455.671 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:10:55.787Z,1509689455.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:10:55.787Z,1509689455.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:10:55.787Z,1509689455.787 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:10:56.050Z,1509689456.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:56.157Z,1509689456.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:10:56.157Z,1509689456.157 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 119
2017-11-03T06:10:56.158Z,1509689456.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:10:56.158Z,1509689456.158 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 119
2017-11-03T06:10:56.158Z,1509689456.158 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:10:56.158Z,1509689456.158 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119
2017-11-03T06:10:56.159Z,1509689456.159 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:10:56.159Z,1509689456.159 [BPC1] No Fault, FailCount= 1
2017-11-03T06:10:56.455Z,1509689456.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:56.539Z,1509689456.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:10:56.540Z,1509689456.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:10:56.540Z,1509689456.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:10:56.541Z,1509689456.541 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:10:56.541Z,1509689456.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:10:56.541Z,1509689456.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:10:56.542Z,1509689456.542 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:10:56.542Z,1509689456.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:10:56.542Z,1509689456.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:10:56.857Z,1509689456.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:56.874Z,1509689456.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:10:56.875Z,1509689456.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:57.261Z,1509689457.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:57.282Z,1509689457.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:10:57.283Z,1509689457.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:57.665Z,1509689457.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:57.686Z,1509689457.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:10:57.687Z,1509689457.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:58.067Z,1509689458.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:58.123Z,1509689458.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:10:58.124Z,1509689458.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:58.469Z,1509689458.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:58.484Z,1509689458.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:10:58.485Z,1509689458.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:58.858Z,1509689458.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:58.897Z,1509689458.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:10:58.898Z,1509689458.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:59.263Z,1509689459.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:59.295Z,1509689459.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:10:59.296Z,1509689459.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:10:59.650Z,1509689459.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:10:59.726Z,1509689459.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:10:59.727Z,1509689459.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:00.081Z,1509689460.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:00.138Z,1509689460.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:11:00.139Z,1509689460.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:00.480Z,1509689460.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:00.495Z,1509689460.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:11:00.496Z,1509689460.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:00.874Z,1509689460.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:00.917Z,1509689460.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:11:00.918Z,1509689460.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:01.284Z,1509689461.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:01.331Z,1509689461.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:11:01.332Z,1509689461.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:01.673Z,1509689461.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:01.688Z,1509689461.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:11:01.689Z,1509689461.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:02.059Z,1509689462.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:02.108Z,1509689462.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:11:02.113Z,1509689462.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:02.461Z,1509689462.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:02.504Z,1509689462.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:11:02.505Z,1509689462.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:02.862Z,1509689462.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:02.911Z,1509689462.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:11:02.912Z,1509689462.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:03.257Z,1509689463.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:03.267Z,1509689463.267 [PNI_TCM](ERROR): CRC does not match. Expected:0x5589 got:0x1635
2017-11-03T06:11:03.314Z,1509689463.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:11:03.315Z,1509689463.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:03.673Z,1509689463.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:03.679Z,1509689463.679 [PNI_TCM](ERROR): CRC does not match. Expected:0x62207 got:0x49818
2017-11-03T06:11:03.732Z,1509689463.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:11:03.749Z,1509689463.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:04.064Z,1509689464.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:04.106Z,1509689464.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:11:04.107Z,1509689464.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:04.463Z,1509689464.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:04.501Z,1509689464.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:11:04.502Z,1509689464.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:04.861Z,1509689464.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:04.884Z,1509689464.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:11:04.913Z,1509689464.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:05.260Z,1509689465.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:05.279Z,1509689465.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:11:05.280Z,1509689465.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:05.661Z,1509689465.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:05.704Z,1509689465.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T06:11:05.709Z,1509689465.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:05.718Z,1509689465.718 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T06:06:05.6Z
2017-11-03T06:11:05.718Z,1509689465.718 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T06:11:05.718Z,1509689465.718 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T06:11:06.079Z,1509689466.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:06.119Z,1509689466.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:11:06.120Z,1509689466.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:06.879Z,1509689466.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:06.925Z,1509689466.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:11:06.926Z,1509689466.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:07.106Z,1509689467.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:07.162Z,1509689467.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T06:11:07.163Z,1509689467.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:12.359Z,1509689472.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:12.527Z,1509689472.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:12.616Z,1509689472.616 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0140.lzma
2017-11-03T06:11:12.638Z,1509689472.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:12.674Z,1509689472.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:13.035Z,1509689473.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:13.069Z,1509689473.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:13.415Z,1509689473.415 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0140.lzma.bak
2017-11-03T06:11:13.415Z,1509689473.415 [DataOverHttps](INFO): SBD MOMSN=5182881
2017-11-03T06:11:13.478Z,1509689473.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:13.523Z,1509689473.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:14.043Z,1509689474.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:14.065Z,1509689474.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:14.240Z,1509689474.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:14.291Z,1509689474.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:17.470Z,1509689477.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:17.518Z,1509689477.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:17.667Z,1509689477.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:17.691Z,1509689477.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:18.064Z,1509689478.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:18.079Z,1509689478.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:18.442Z,1509689478.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:18.475Z,1509689478.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:18.845Z,1509689478.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:18.876Z,1509689478.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:19.244Z,1509689479.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:19.282Z,1509689479.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:22.345Z,1509689482.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:22.368Z,1509689482.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:22.490Z,1509689482.490 [DataOverHttps](INFO): Sending 273 bytes from file Logs/20171103T001125/Express0141.lzma
2017-11-03T06:11:22.562Z,1509689482.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:22.639Z,1509689482.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:22.922Z,1509689482.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:22.937Z,1509689482.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:23.279Z,1509689483.279 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0141.lzma.bak
2017-11-03T06:11:23.279Z,1509689483.279 [DataOverHttps](INFO): SBD MOMSN=5182883
2017-11-03T06:11:23.323Z,1509689483.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:23.343Z,1509689483.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:23.913Z,1509689483.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:23.928Z,1509689483.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:23.931Z,1509689483.931 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T06:11:23.931Z,1509689483.931 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T06:11:23.931Z,1509689483.931 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T06:11:24.100Z,1509689484.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:24.131Z,1509689484.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:27.225Z,1509689487.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:27.241Z,1509689487.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:27.382Z,1509689487.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:27.397Z,1509689487.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:27.777Z,1509689487.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:27.793Z,1509689487.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:28.173Z,1509689488.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:28.187Z,1509689488.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:28.573Z,1509689488.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:28.589Z,1509689488.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:28.965Z,1509689488.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:28.981Z,1509689488.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:29.378Z,1509689489.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:29.399Z,1509689489.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:29.778Z,1509689489.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:29.866Z,1509689489.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:30.183Z,1509689490.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:30.202Z,1509689490.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:30.562Z,1509689490.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:30.630Z,1509689490.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:30.959Z,1509689490.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:30.986Z,1509689490.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:31.382Z,1509689491.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:31.435Z,1509689491.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:31.782Z,1509689491.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:31.835Z,1509689491.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:32.183Z,1509689492.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:32.198Z,1509689492.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:32.562Z,1509689492.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:32.589Z,1509689492.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:32.959Z,1509689492.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:32.987Z,1509689492.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:33.382Z,1509689493.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:33.397Z,1509689493.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:33.783Z,1509689493.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:33.803Z,1509689493.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:34.182Z,1509689494.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:34.197Z,1509689494.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:34.560Z,1509689494.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:34.586Z,1509689494.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:34.961Z,1509689494.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:34.992Z,1509689494.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:35.382Z,1509689495.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:35.397Z,1509689495.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:35.781Z,1509689495.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:35.811Z,1509689495.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:36.183Z,1509689496.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:36.198Z,1509689496.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:36.559Z,1509689496.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:36.591Z,1509689496.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:36.960Z,1509689496.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:36.990Z,1509689496.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:37.360Z,1509689497.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:37.395Z,1509689497.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:37.784Z,1509689497.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:37.799Z,1509689497.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:38.183Z,1509689498.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:38.203Z,1509689498.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:38.582Z,1509689498.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:38.597Z,1509689498.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:38.959Z,1509689498.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:38.994Z,1509689498.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:39.359Z,1509689499.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:39.375Z,1509689499.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:39.764Z,1509689499.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:39.788Z,1509689499.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:40.161Z,1509689500.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:40.175Z,1509689500.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:40.573Z,1509689500.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:40.600Z,1509689500.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:40.977Z,1509689500.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:41.003Z,1509689501.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:41.373Z,1509689501.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:41.401Z,1509689501.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:41.759Z,1509689501.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:41.775Z,1509689501.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:42.171Z,1509689502.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:42.202Z,1509689502.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:42.564Z,1509689502.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:42.579Z,1509689502.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:42.963Z,1509689502.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:42.979Z,1509689502.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:43.378Z,1509689503.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:43.408Z,1509689503.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:43.777Z,1509689503.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:43.855Z,1509689503.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:44.177Z,1509689504.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:44.239Z,1509689504.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:44.569Z,1509689504.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:44.584Z,1509689504.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:44.964Z,1509689504.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:44.979Z,1509689504.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:45.377Z,1509689505.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:45.406Z,1509689505.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:45.781Z,1509689505.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:45.835Z,1509689505.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:46.177Z,1509689506.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:46.208Z,1509689506.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:46.566Z,1509689506.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:46.618Z,1509689506.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:46.968Z,1509689506.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:47.015Z,1509689507.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:47.377Z,1509689507.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:47.407Z,1509689507.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:47.777Z,1509689507.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:47.806Z,1509689507.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:48.169Z,1509689508.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:48.184Z,1509689508.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:48.565Z,1509689508.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:48.580Z,1509689508.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:48.980Z,1509689508.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:49.066Z,1509689509.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:49.377Z,1509689509.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:49.408Z,1509689509.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:49.501Z,1509689509.501 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T06:11:49.777Z,1509689509.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:49.927Z,1509689509.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:50.170Z,1509689510.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:50.185Z,1509689510.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:50.566Z,1509689510.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:50.581Z,1509689510.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:50.952Z,1509689510.952 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T06:11:50.952Z,1509689510.952 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T06:11:50.952Z,1509689510.952 [DropWeight](ERROR): Hardware Fault
2017-11-03T06:11:50.970Z,1509689510.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:50.984Z,1509689510.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:51.096Z,1509689511.096 [CBIT](INFO): Critical error at 20171103T061150
2017-11-03T06:11:51.098Z,1509689511.098 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T06:11:51.098Z,1509689511.098 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T06:11:51.381Z,1509689511.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:51.411Z,1509689511.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:51.499Z,1509689511.499 [CBIT](INFO): Critical error at 20171103T061151
2017-11-03T06:11:51.777Z,1509689511.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:51.809Z,1509689511.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:52.170Z,1509689512.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:52.185Z,1509689512.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:52.583Z,1509689512.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:52.613Z,1509689512.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:52.964Z,1509689512.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:52.979Z,1509689512.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:53.378Z,1509689513.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:53.409Z,1509689513.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:53.778Z,1509689513.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:53.813Z,1509689513.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:54.173Z,1509689514.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:54.189Z,1509689514.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:54.567Z,1509689514.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:54.582Z,1509689514.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:54.961Z,1509689514.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:54.976Z,1509689514.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:55.382Z,1509689515.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:55.398Z,1509689515.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:55.780Z,1509689515.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:55.795Z,1509689515.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:56.179Z,1509689516.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:56.199Z,1509689516.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:56.567Z,1509689516.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:56.587Z,1509689516.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:56.966Z,1509689516.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:56.981Z,1509689516.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:57.380Z,1509689517.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:57.395Z,1509689517.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:57.780Z,1509689517.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:57.795Z,1509689517.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:58.181Z,1509689518.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:58.195Z,1509689518.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:58.569Z,1509689518.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:58.623Z,1509689518.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:58.968Z,1509689518.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:59.027Z,1509689519.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:59.381Z,1509689519.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:59.396Z,1509689519.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:11:59.780Z,1509689519.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:11:59.838Z,1509689519.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:00.180Z,1509689520.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:00.195Z,1509689520.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:00.572Z,1509689520.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:00.634Z,1509689520.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:00.970Z,1509689520.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:01.027Z,1509689521.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:01.381Z,1509689521.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:01.395Z,1509689521.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:01.784Z,1509689521.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:01.799Z,1509689521.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:02.181Z,1509689522.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:02.196Z,1509689522.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:02.569Z,1509689522.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:02.586Z,1509689522.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:02.972Z,1509689522.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:02.986Z,1509689522.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:03.397Z,1509689523.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:03.411Z,1509689523.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:03.781Z,1509689523.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:03.796Z,1509689523.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:04.184Z,1509689524.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:04.198Z,1509689524.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:04.581Z,1509689524.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:04.596Z,1509689524.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:04.972Z,1509689524.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:04.995Z,1509689524.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:05.359Z,1509689525.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:05.385Z,1509689525.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:05.772Z,1509689525.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:05.795Z,1509689525.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:06.169Z,1509689526.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:06.189Z,1509689526.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:06.578Z,1509689526.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:06.593Z,1509689526.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:06.984Z,1509689526.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:06.999Z,1509689526.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:07.381Z,1509689527.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:07.396Z,1509689527.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:07.757Z,1509689527.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:07.783Z,1509689527.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:08.171Z,1509689528.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:08.185Z,1509689528.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:08.571Z,1509689528.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:08.586Z,1509689528.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:08.956Z,1509689528.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:08.984Z,1509689528.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:09.382Z,1509689529.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:09.397Z,1509689529.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:09.782Z,1509689529.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:09.803Z,1509689529.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:10.179Z,1509689530.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:10.194Z,1509689530.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:10.561Z,1509689530.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:10.588Z,1509689530.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:10.961Z,1509689530.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:10.987Z,1509689530.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:11.375Z,1509689531.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:11.397Z,1509689531.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:11.782Z,1509689531.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:11.803Z,1509689531.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:12.186Z,1509689532.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:12.211Z,1509689532.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:12.565Z,1509689532.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:12.611Z,1509689532.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:12.964Z,1509689532.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:12.989Z,1509689532.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:13.382Z,1509689533.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:13.450Z,1509689533.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:13.783Z,1509689533.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:13.798Z,1509689533.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:14.182Z,1509689534.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:14.197Z,1509689534.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:14.561Z,1509689534.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:14.615Z,1509689534.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:14.956Z,1509689534.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:14.970Z,1509689534.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:15.381Z,1509689535.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:15.439Z,1509689535.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:15.781Z,1509689535.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:15.797Z,1509689535.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:16.182Z,1509689536.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:16.219Z,1509689536.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:16.564Z,1509689536.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:16.593Z,1509689536.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:16.960Z,1509689536.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:16.987Z,1509689536.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:17.373Z,1509689537.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:17.399Z,1509689537.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:17.773Z,1509689537.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:17.839Z,1509689537.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:18.173Z,1509689538.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:18.203Z,1509689538.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:18.563Z,1509689538.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:18.600Z,1509689538.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:18.963Z,1509689538.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:18.994Z,1509689538.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:19.373Z,1509689539.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:19.399Z,1509689539.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:19.773Z,1509689539.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:19.800Z,1509689539.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:20.174Z,1509689540.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:20.198Z,1509689540.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:20.560Z,1509689540.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:20.575Z,1509689540.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:20.963Z,1509689540.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:20.977Z,1509689540.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:21.373Z,1509689541.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:21.399Z,1509689541.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:21.773Z,1509689541.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:21.801Z,1509689541.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:22.173Z,1509689542.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:22.199Z,1509689542.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:22.561Z,1509689542.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:22.576Z,1509689542.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:22.961Z,1509689542.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:22.975Z,1509689542.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:23.373Z,1509689543.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:23.401Z,1509689543.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:23.773Z,1509689543.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:23.814Z,1509689543.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:24.173Z,1509689544.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:24.200Z,1509689544.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:24.564Z,1509689544.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:24.602Z,1509689544.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:27.673Z,1509689547.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:27.696Z,1509689547.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:27.797Z,1509689547.797 [CBIT](IMPORTANT): Beginning ground fault scan
2017-11-03T06:12:27.858Z,1509689547.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:27.894Z,1509689547.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:28.253Z,1509689548.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:28.346Z,1509689548.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:28.649Z,1509689548.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:28.671Z,1509689548.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:29.032Z,1509689549.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:29.098Z,1509689549.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:29.432Z,1509689549.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:29.466Z,1509689549.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:29.827Z,1509689549.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:29.879Z,1509689549.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:30.232Z,1509689550.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:30.259Z,1509689550.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:30.645Z,1509689550.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:30.708Z,1509689550.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:31.041Z,1509689551.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:31.067Z,1509689551.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:31.445Z,1509689551.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:31.479Z,1509689551.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:31.832Z,1509689551.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:31.869Z,1509689551.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:32.232Z,1509689552.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:32.247Z,1509689552.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:32.638Z,1509689552.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:32.661Z,1509689552.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:33.032Z,1509689553.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:33.069Z,1509689553.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:33.446Z,1509689553.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:33.475Z,1509689553.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:33.854Z,1509689553.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:33.875Z,1509689553.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:34.245Z,1509689554.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:34.270Z,1509689554.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:34.632Z,1509689554.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:34.647Z,1509689554.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:35.032Z,1509689555.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:35.047Z,1509689555.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:35.438Z,1509689555.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:35.468Z,1509689555.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:35.834Z,1509689555.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:35.865Z,1509689555.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:36.235Z,1509689556.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:36.262Z,1509689556.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:36.644Z,1509689556.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:36.669Z,1509689556.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:37.046Z,1509689557.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:37.079Z,1509689557.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:37.446Z,1509689557.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:37.474Z,1509689557.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:37.832Z,1509689557.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:37.847Z,1509689557.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:38.232Z,1509689558.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:38.264Z,1509689558.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:38.364Z,1509689558.364 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.128083
CHAN A1 (24V): -0.062719
CHAN A2 (12V): -0.000868
CHAN A3 (5V): -0.021223
CHAN B0 (3.3V): 0.000071
CHAN B1 (3.15aV): -0.001070
CHAN B2 (3.15bV): -0.000458
CHAN B3 (GND): 0.000060
OPEN: 0.003749
Full Scale Calc: 4.765 mA, -1.589 mA
2017-11-03T06:12:38.633Z,1509689558.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:38.665Z,1509689558.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:39.035Z,1509689559.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:39.069Z,1509689559.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:39.446Z,1509689559.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:39.475Z,1509689559.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:39.854Z,1509689559.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:39.875Z,1509689559.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:40.245Z,1509689560.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:40.278Z,1509689560.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:40.633Z,1509689560.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:40.648Z,1509689560.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:41.034Z,1509689561.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:41.067Z,1509689561.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:41.432Z,1509689561.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:41.447Z,1509689561.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:41.833Z,1509689561.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:41.848Z,1509689561.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:42.232Z,1509689562.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:42.294Z,1509689562.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:42.645Z,1509689562.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:42.699Z,1509689562.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:43.045Z,1509689563.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:43.076Z,1509689563.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:43.449Z,1509689563.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:43.507Z,1509689563.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:43.835Z,1509689563.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:43.849Z,1509689563.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:44.231Z,1509689564.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:44.283Z,1509689564.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:44.636Z,1509689564.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:44.691Z,1509689564.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:45.035Z,1509689565.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:45.049Z,1509689565.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:45.445Z,1509689565.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:45.476Z,1509689565.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:45.849Z,1509689565.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:45.874Z,1509689565.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:46.245Z,1509689566.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:46.268Z,1509689566.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:46.631Z,1509689566.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:46.646Z,1509689566.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:47.036Z,1509689567.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:47.051Z,1509689567.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:47.434Z,1509689567.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:47.448Z,1509689567.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:47.832Z,1509689567.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:47.847Z,1509689567.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:48.235Z,1509689568.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:48.255Z,1509689568.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:48.645Z,1509689568.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:48.660Z,1509689568.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:49.053Z,1509689569.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:49.083Z,1509689569.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:49.449Z,1509689569.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:49.481Z,1509689569.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:49.835Z,1509689569.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:49.850Z,1509689569.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:50.232Z,1509689570.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:50.251Z,1509689570.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:50.636Z,1509689570.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:50.651Z,1509689570.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:51.035Z,1509689571.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:51.049Z,1509689571.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:51.445Z,1509689571.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:51.477Z,1509689571.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:51.849Z,1509689571.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:51.880Z,1509689571.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:52.249Z,1509689572.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:52.281Z,1509689572.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:52.640Z,1509689572.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:52.655Z,1509689572.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:53.037Z,1509689573.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:53.051Z,1509689573.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:53.436Z,1509689573.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:53.451Z,1509689573.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:53.840Z,1509689573.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:53.855Z,1509689573.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:54.236Z,1509689574.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:54.251Z,1509689574.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:54.649Z,1509689574.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:54.681Z,1509689574.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:55.054Z,1509689575.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:55.079Z,1509689575.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:55.450Z,1509689575.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:55.480Z,1509689575.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:55.831Z,1509689575.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:55.846Z,1509689575.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:56.235Z,1509689576.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:56.255Z,1509689576.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:56.636Z,1509689576.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:56.702Z,1509689576.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:57.036Z,1509689577.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:57.103Z,1509689577.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:57.445Z,1509689577.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:57.461Z,1509689577.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:57.845Z,1509689577.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:57.894Z,1509689577.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:58.253Z,1509689578.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:58.287Z,1509689578.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:58.640Z,1509689578.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:58.695Z,1509689578.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:59.040Z,1509689579.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:59.091Z,1509689579.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:59.440Z,1509689579.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:59.455Z,1509689579.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:12:59.841Z,1509689579.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:12:59.857Z,1509689579.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:00.239Z,1509689580.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:00.255Z,1509689580.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:00.654Z,1509689580.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:00.688Z,1509689580.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:01.054Z,1509689581.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:01.087Z,1509689581.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:01.445Z,1509689581.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:01.461Z,1509689581.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:01.839Z,1509689581.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:01.854Z,1509689581.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:02.239Z,1509689582.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:02.254Z,1509689582.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:02.639Z,1509689582.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:02.654Z,1509689582.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:03.039Z,1509689583.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:03.054Z,1509689583.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:03.454Z,1509689583.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:03.487Z,1509689583.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:03.845Z,1509689583.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:03.860Z,1509689583.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:04.245Z,1509689584.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:04.260Z,1509689584.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:04.639Z,1509689584.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:04.654Z,1509689584.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:05.039Z,1509689585.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:05.054Z,1509689585.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:05.439Z,1509689585.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:05.453Z,1509689585.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:05.838Z,1509689585.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:05.853Z,1509689585.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:06.239Z,1509689586.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:06.254Z,1509689586.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:06.653Z,1509689586.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:06.686Z,1509689586.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:07.053Z,1509689587.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:07.085Z,1509689587.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:07.445Z,1509689587.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:07.461Z,1509689587.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:07.839Z,1509689587.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:07.854Z,1509689587.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:08.240Z,1509689588.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:08.255Z,1509689588.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:08.640Z,1509689588.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:08.655Z,1509689588.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:09.039Z,1509689589.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:09.054Z,1509689589.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:09.454Z,1509689589.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:09.486Z,1509689589.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:09.845Z,1509689589.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:09.861Z,1509689589.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:10.252Z,1509689590.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:10.286Z,1509689590.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:10.639Z,1509689590.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:10.710Z,1509689590.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:11.039Z,1509689591.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:11.108Z,1509689591.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:11.433Z,1509689591.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:11.448Z,1509689591.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:11.841Z,1509689591.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:11.891Z,1509689591.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:12.240Z,1509689592.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:12.259Z,1509689592.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:12.645Z,1509689592.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:12.684Z,1509689592.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:13.053Z,1509689593.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:13.107Z,1509689593.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:13.445Z,1509689593.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:13.461Z,1509689593.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:13.840Z,1509689593.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:13.854Z,1509689593.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:14.239Z,1509689594.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:14.254Z,1509689594.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:14.640Z,1509689594.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:14.655Z,1509689594.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:15.039Z,1509689595.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:15.053Z,1509689595.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:15.453Z,1509689595.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:15.485Z,1509689595.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:15.845Z,1509689595.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:15.860Z,1509689595.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:16.253Z,1509689596.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:16.268Z,1509689596.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:16.640Z,1509689596.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:16.655Z,1509689596.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:17.040Z,1509689597.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:17.055Z,1509689597.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:17.440Z,1509689597.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:17.455Z,1509689597.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:17.843Z,1509689597.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:17.858Z,1509689597.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:18.242Z,1509689598.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:18.258Z,1509689598.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:18.644Z,1509689598.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:18.660Z,1509689598.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:19.049Z,1509689599.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:19.071Z,1509689599.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:19.445Z,1509689599.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:19.461Z,1509689599.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:19.842Z,1509689599.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:19.857Z,1509689599.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:20.242Z,1509689600.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:20.257Z,1509689600.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:20.642Z,1509689600.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:20.658Z,1509689600.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:21.042Z,1509689601.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:21.057Z,1509689601.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:21.446Z,1509689601.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:21.461Z,1509689601.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:21.846Z,1509689601.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:21.861Z,1509689601.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:22.246Z,1509689602.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:22.261Z,1509689602.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:22.640Z,1509689602.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:22.655Z,1509689602.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:23.038Z,1509689603.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:13:23.053Z,1509689603.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:23.455Z,1509689603.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:23.857Z,1509689603.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:24.255Z,1509689604.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:24.662Z,1509689604.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:27.818Z,1509689607.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:27.995Z,1509689607.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:28.375Z,1509689608.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:28.799Z,1509689608.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:29.167Z,1509689609.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:29.602Z,1509689609.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:30.015Z,1509689610.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:30.373Z,1509689610.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:30.765Z,1509689610.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:31.166Z,1509689611.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:31.571Z,1509689611.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:31.967Z,1509689611.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:32.366Z,1509689612.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:32.772Z,1509689612.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:33.192Z,1509689613.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:33.575Z,1509689613.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:33.966Z,1509689613.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:34.371Z,1509689614.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:34.771Z,1509689614.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:35.166Z,1509689615.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:35.598Z,1509689615.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:35.980Z,1509689615.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:36.372Z,1509689616.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:36.771Z,1509689616.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:37.167Z,1509689617.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:37.566Z,1509689617.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:37.975Z,1509689617.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:38.363Z,1509689618.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:38.772Z,1509689618.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:39.173Z,1509689619.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:39.572Z,1509689619.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:39.966Z,1509689619.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:40.367Z,1509689620.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:40.775Z,1509689620.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:41.167Z,1509689621.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:41.622Z,1509689621.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:42.022Z,1509689622.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:42.375Z,1509689622.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:42.803Z,1509689622.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:43.170Z,1509689623.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:43.606Z,1509689623.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:44.006Z,1509689624.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:44.375Z,1509689624.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:44.783Z,1509689624.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:45.177Z,1509689625.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:45.579Z,1509689625.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:45.968Z,1509689625.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:46.371Z,1509689626.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:46.771Z,1509689626.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:47.168Z,1509689627.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:47.576Z,1509689627.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:47.979Z,1509689627.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:48.375Z,1509689628.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:48.767Z,1509689628.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:49.175Z,1509689629.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:49.568Z,1509689629.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:49.965Z,1509689629.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:50.363Z,1509689630.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:50.783Z,1509689630.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:51.177Z,1509689631.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:51.575Z,1509689631.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:51.966Z,1509689631.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:52.375Z,1509689632.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:52.775Z,1509689632.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:53.167Z,1509689633.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:53.582Z,1509689633.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:53.977Z,1509689633.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:54.379Z,1509689634.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:54.763Z,1509689634.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:55.175Z,1509689635.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:55.571Z,1509689635.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:56.007Z,1509689636.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:56.407Z,1509689636.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:56.783Z,1509689636.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:56.783Z,1509689636.783 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 120
2017-11-03T06:13:56.783Z,1509689636.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:13:56.785Z,1509689636.785 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:56.785Z,1509689636.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 120
2017-11-03T06:13:56.785Z,1509689636.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:13:56.787Z,1509689636.787 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:56.787Z,1509689636.787 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120
2017-11-03T06:13:56.787Z,1509689636.787 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:13:56.885Z,1509689636.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:13:56.885Z,1509689636.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:13:56.885Z,1509689636.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:13:57.260Z,1509689637.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:13:57.261Z,1509689637.261 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 120
2017-11-03T06:13:57.261Z,1509689637.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:13:57.261Z,1509689637.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 120
2017-11-03T06:13:57.262Z,1509689637.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:13:57.262Z,1509689637.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120
2017-11-03T06:13:57.617Z,1509689637.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:13:57.617Z,1509689637.617 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:13:57.618Z,1509689637.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:13:57.618Z,1509689637.618 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:13:57.618Z,1509689637.618 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:13:57.619Z,1509689637.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:13:57.619Z,1509689637.619 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:13:57.620Z,1509689637.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:13:57.620Z,1509689637.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:13:57.975Z,1509689637.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:13:57.976Z,1509689637.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:58.390Z,1509689638.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:13:58.391Z,1509689638.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:58.794Z,1509689638.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:13:58.795Z,1509689638.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:59.174Z,1509689639.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:13:59.175Z,1509689639.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:59.582Z,1509689639.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:13:59.583Z,1509689639.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:13:59.983Z,1509689639.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:13:59.985Z,1509689639.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:00.386Z,1509689640.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:14:00.387Z,1509689640.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:00.781Z,1509689640.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:14:00.786Z,1509689640.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:01.186Z,1509689641.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:14:01.187Z,1509689641.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:01.586Z,1509689641.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:14:01.587Z,1509689641.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:01.961Z,1509689641.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:14:01.962Z,1509689641.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:02.385Z,1509689642.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:14:02.386Z,1509689642.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:02.783Z,1509689642.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:14:02.784Z,1509689642.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:03.161Z,1509689643.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:03.187Z,1509689643.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:14:03.188Z,1509689643.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:03.557Z,1509689643.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:03.583Z,1509689643.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:14:03.584Z,1509689643.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:03.946Z,1509689643.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:03.982Z,1509689643.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:14:03.983Z,1509689643.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:04.350Z,1509689644.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:04.365Z,1509689644.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:14:04.365Z,1509689644.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:04.751Z,1509689644.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:04.766Z,1509689644.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:14:04.767Z,1509689644.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:05.147Z,1509689645.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:05.162Z,1509689645.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:14:05.163Z,1509689645.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:05.557Z,1509689645.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:05.588Z,1509689645.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:14:05.589Z,1509689645.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:05.962Z,1509689645.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:05.985Z,1509689645.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:14:05.986Z,1509689645.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:06.362Z,1509689646.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:06.385Z,1509689646.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:14:06.386Z,1509689646.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:06.751Z,1509689646.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:06.766Z,1509689646.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:14:06.767Z,1509689646.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:07.143Z,1509689647.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:07.159Z,1509689647.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:14:07.161Z,1509689647.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:07.547Z,1509689647.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:07.563Z,1509689647.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:14:07.564Z,1509689647.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:07.951Z,1509689647.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:07.967Z,1509689647.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:14:07.968Z,1509689647.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:08.347Z,1509689648.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:08.363Z,1509689648.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:14:08.364Z,1509689648.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:08.761Z,1509689648.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:08.790Z,1509689648.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:14:08.791Z,1509689648.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:09.194Z,1509689649.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:14:09.195Z,1509689649.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:09.585Z,1509689649.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:14:09.586Z,1509689649.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:09.962Z,1509689649.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:14:09.963Z,1509689649.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:10.357Z,1509689650.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:14:10.358Z,1509689650.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:10.802Z,1509689650.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T06:14:10.803Z,1509689650.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:11.209Z,1509689651.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:14:11.210Z,1509689651.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:11.567Z,1509689651.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T06:14:11.568Z,1509689651.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:12.011Z,1509689652.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:14:12.012Z,1509689652.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:12.375Z,1509689652.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T06:14:12.397Z,1509689652.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:12.793Z,1509689652.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T06:14:12.794Z,1509689652.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:13.198Z,1509689653.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T06:14:13.199Z,1509689653.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:13.568Z,1509689653.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T06:14:13.569Z,1509689653.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:13.966Z,1509689653.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T06:14:13.967Z,1509689653.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:14.366Z,1509689654.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T06:14:14.367Z,1509689654.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:14.793Z,1509689654.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T06:14:14.794Z,1509689654.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:15.194Z,1509689655.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T06:14:15.195Z,1509689655.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:15.572Z,1509689655.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T06:14:15.573Z,1509689655.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:15.966Z,1509689655.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T06:14:15.967Z,1509689655.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:16.365Z,1509689656.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T06:14:16.366Z,1509689656.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:16.766Z,1509689656.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T06:14:16.767Z,1509689656.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:17.171Z,1509689657.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:17.568Z,1509689657.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:17.972Z,1509689657.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:18.393Z,1509689658.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:18.763Z,1509689658.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:19.166Z,1509689659.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:19.567Z,1509689659.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:19.966Z,1509689659.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:20.366Z,1509689660.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:20.769Z,1509689660.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:21.172Z,1509689661.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:21.573Z,1509689661.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:21.971Z,1509689661.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:22.367Z,1509689662.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:22.768Z,1509689662.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:23.167Z,1509689663.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:23.594Z,1509689663.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:23.993Z,1509689663.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:24.393Z,1509689664.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:24.769Z,1509689664.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:27.907Z,1509689667.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:28.079Z,1509689668.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:28.470Z,1509689668.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:28.903Z,1509689668.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:29.293Z,1509689669.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:29.694Z,1509689669.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:30.106Z,1509689670.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:30.460Z,1509689670.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:30.874Z,1509689670.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:31.256Z,1509689671.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:31.670Z,1509689671.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:32.076Z,1509689672.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:32.491Z,1509689672.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:32.859Z,1509689672.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:33.262Z,1509689673.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:33.667Z,1509689673.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:34.077Z,1509689674.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:34.418Z,1509689674.418 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T06:14:34.418Z,1509689674.418 [NAL9602] Data Fault, FailCount= 3
2017-11-03T06:14:34.418Z,1509689674.418 [NAL9602](ERROR): Data Fault
2017-11-03T06:14:34.473Z,1509689674.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:34.589Z,1509689674.589 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T06:14:34.811Z,1509689674.811 [NAL9602](INFO): Powering down
2017-11-03T06:14:34.862Z,1509689674.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:35.260Z,1509689675.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:35.663Z,1509689675.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:35.760Z,1509689675.760 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T06:14:35.761Z,1509689675.761 [NAL9602] No Fault, FailCount= 3
2017-11-03T06:14:36.052Z,1509689676.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:36.459Z,1509689676.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:36.861Z,1509689676.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:37.277Z,1509689677.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:37.662Z,1509689677.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:38.060Z,1509689678.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:38.462Z,1509689678.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:38.879Z,1509689678.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:39.257Z,1509689679.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:39.660Z,1509689679.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:40.062Z,1509689680.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:40.456Z,1509689680.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:40.857Z,1509689680.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:41.259Z,1509689681.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:41.660Z,1509689681.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:42.130Z,1509689682.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:42.456Z,1509689682.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:42.861Z,1509689682.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:43.302Z,1509689683.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:43.677Z,1509689683.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:44.096Z,1509689684.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:44.502Z,1509689684.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:44.859Z,1509689684.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:45.270Z,1509689685.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:45.660Z,1509689685.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:46.061Z,1509689686.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:46.462Z,1509689686.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:46.852Z,1509689686.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:47.255Z,1509689687.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:47.658Z,1509689687.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:48.063Z,1509689688.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:48.463Z,1509689688.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:48.861Z,1509689688.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:49.261Z,1509689689.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:49.662Z,1509689689.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:50.070Z,1509689690.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:50.464Z,1509689690.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:50.859Z,1509689690.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:51.262Z,1509689691.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:51.674Z,1509689691.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:52.058Z,1509689692.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:52.463Z,1509689692.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:52.862Z,1509689692.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:53.277Z,1509689693.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:53.635Z,1509689693.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:53.665Z,1509689693.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:54.032Z,1509689694.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:54.062Z,1509689694.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:54.435Z,1509689694.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:54.465Z,1509689694.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:54.834Z,1509689694.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:54.879Z,1509689694.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:55.234Z,1509689695.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:55.264Z,1509689695.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:55.633Z,1509689695.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:55.663Z,1509689695.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:56.035Z,1509689696.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:56.063Z,1509689696.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:56.431Z,1509689696.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:56.535Z,1509689696.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:56.834Z,1509689696.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:56.862Z,1509689696.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:57.234Z,1509689697.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:57.263Z,1509689697.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:57.632Z,1509689697.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:57.703Z,1509689697.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:58.032Z,1509689698.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:58.061Z,1509689698.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:58.427Z,1509689698.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:58.478Z,1509689698.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:58.834Z,1509689698.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:58.901Z,1509689698.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:59.232Z,1509689699.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:59.261Z,1509689699.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:14:59.627Z,1509689699.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:14:59.662Z,1509689699.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:00.034Z,1509689700.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:00.062Z,1509689700.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:00.432Z,1509689700.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:00.469Z,1509689700.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:00.834Z,1509689700.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:00.862Z,1509689700.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:01.234Z,1509689701.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:01.279Z,1509689701.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:01.632Z,1509689701.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:01.665Z,1509689701.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:02.027Z,1509689702.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:02.051Z,1509689702.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:02.427Z,1509689702.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:02.462Z,1509689702.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:02.834Z,1509689702.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:02.872Z,1509689702.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:03.234Z,1509689703.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:03.274Z,1509689703.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:03.624Z,1509689703.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:03.639Z,1509689703.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:04.035Z,1509689704.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:04.073Z,1509689704.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:04.428Z,1509689704.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:04.442Z,1509689704.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:04.815Z,1509689704.815 [NAL9602](INFO): Powering up NAL9602
2017-11-03T06:15:04.833Z,1509689704.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:04.848Z,1509689704.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:05.234Z,1509689705.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:05.273Z,1509689705.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:05.631Z,1509689705.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:05.649Z,1509689705.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:06.038Z,1509689706.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:06.054Z,1509689706.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:06.432Z,1509689706.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:06.447Z,1509689706.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:06.831Z,1509689706.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:06.847Z,1509689706.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:07.240Z,1509689707.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:07.273Z,1509689707.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:07.636Z,1509689707.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:07.679Z,1509689707.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:08.038Z,1509689708.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:08.053Z,1509689708.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:08.438Z,1509689708.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:08.473Z,1509689708.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:08.835Z,1509689708.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:08.853Z,1509689708.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:09.236Z,1509689709.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:09.276Z,1509689709.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:09.639Z,1509689709.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:09.654Z,1509689709.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:10.039Z,1509689710.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:10.078Z,1509689710.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:10.431Z,1509689710.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:10.450Z,1509689710.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:10.839Z,1509689710.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:10.887Z,1509689710.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:11.235Z,1509689711.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:11.302Z,1509689711.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:11.639Z,1509689711.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:11.658Z,1509689711.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:12.040Z,1509689712.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:12.057Z,1509689712.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:12.439Z,1509689712.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:12.498Z,1509689712.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:12.840Z,1509689712.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:12.855Z,1509689712.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:13.239Z,1509689713.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:13.291Z,1509689713.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:13.640Z,1509689713.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:13.690Z,1509689713.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:14.039Z,1509689714.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:14.063Z,1509689714.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:14.440Z,1509689714.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:14.455Z,1509689714.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:14.838Z,1509689714.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:14.858Z,1509689714.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:15.241Z,1509689715.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:15.257Z,1509689715.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:15.654Z,1509689715.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:15.683Z,1509689715.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:16.022Z,1509689716.022 [NAL9602](INFO): NAL9602 initialized
2017-11-03T06:15:16.039Z,1509689716.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:16.056Z,1509689716.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:16.439Z,1509689716.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:16.459Z,1509689716.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:16.844Z,1509689716.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:16.859Z,1509689716.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:17.246Z,1509689717.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:17.283Z,1509689717.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:17.641Z,1509689717.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:17.657Z,1509689717.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:18.039Z,1509689718.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:18.058Z,1509689718.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:18.440Z,1509689718.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:18.456Z,1509689718.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:18.840Z,1509689718.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:18.863Z,1509689718.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:19.239Z,1509689719.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:19.255Z,1509689719.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:19.646Z,1509689719.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:19.664Z,1509689719.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:20.055Z,1509689720.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:20.081Z,1509689720.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:20.442Z,1509689720.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:20.486Z,1509689720.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:20.839Z,1509689720.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:20.862Z,1509689720.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:21.239Z,1509689721.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:21.258Z,1509689721.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:21.642Z,1509689721.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:21.658Z,1509689721.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:22.039Z,1509689722.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:22.082Z,1509689722.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:22.445Z,1509689722.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:22.464Z,1509689722.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:22.855Z,1509689722.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:22.887Z,1509689722.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:23.247Z,1509689723.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:23.267Z,1509689723.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:23.639Z,1509689723.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:23.682Z,1509689723.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:24.039Z,1509689724.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:24.055Z,1509689724.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:24.439Z,1509689724.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:24.458Z,1509689724.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:24.843Z,1509689724.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:24.858Z,1509689724.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:27.944Z,1509689727.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:28.015Z,1509689728.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:28.169Z,1509689728.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:28.193Z,1509689728.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:28.565Z,1509689728.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:28.631Z,1509689728.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:28.966Z,1509689728.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:28.991Z,1509689728.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:29.352Z,1509689729.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:29.398Z,1509689729.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:29.753Z,1509689729.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:29.795Z,1509689729.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:30.152Z,1509689730.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:30.167Z,1509689730.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:30.565Z,1509689730.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:30.591Z,1509689730.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:30.965Z,1509689730.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:30.995Z,1509689730.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:31.365Z,1509689731.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:31.391Z,1509689731.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:31.754Z,1509689731.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:31.791Z,1509689731.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:32.151Z,1509689732.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:32.166Z,1509689732.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:32.552Z,1509689732.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:32.567Z,1509689732.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:32.953Z,1509689732.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:32.968Z,1509689732.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:33.351Z,1509689733.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:33.366Z,1509689733.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:33.765Z,1509689733.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:33.830Z,1509689733.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:34.165Z,1509689734.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:34.180Z,1509689734.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:34.573Z,1509689734.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:34.603Z,1509689734.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:34.960Z,1509689734.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:34.979Z,1509689734.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:35.359Z,1509689735.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:35.374Z,1509689735.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:35.760Z,1509689735.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:35.775Z,1509689735.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:36.156Z,1509689736.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:36.171Z,1509689736.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:36.573Z,1509689736.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:36.603Z,1509689736.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:36.973Z,1509689736.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:37.003Z,1509689737.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:37.373Z,1509689737.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:37.403Z,1509689737.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:37.759Z,1509689737.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:37.775Z,1509689737.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:38.160Z,1509689738.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:38.174Z,1509689738.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:38.560Z,1509689738.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:38.575Z,1509689738.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:38.961Z,1509689738.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:38.976Z,1509689738.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:39.360Z,1509689739.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:39.375Z,1509689739.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:39.773Z,1509689739.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:39.803Z,1509689739.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:40.165Z,1509689740.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:40.180Z,1509689740.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:40.565Z,1509689740.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:40.580Z,1509689740.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:40.960Z,1509689740.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:40.975Z,1509689740.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:41.361Z,1509689741.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:41.376Z,1509689741.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:41.761Z,1509689741.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:41.826Z,1509689741.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:42.159Z,1509689742.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:42.183Z,1509689742.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:42.565Z,1509689742.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:42.626Z,1509689742.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:42.965Z,1509689742.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:42.980Z,1509689742.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:43.366Z,1509689743.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:43.382Z,1509689743.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:43.761Z,1509689743.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:43.818Z,1509689743.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:44.163Z,1509689744.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:44.177Z,1509689744.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:44.563Z,1509689744.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:44.615Z,1509689744.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:44.962Z,1509689744.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:45.015Z,1509689745.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:45.360Z,1509689745.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:45.375Z,1509689745.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:45.766Z,1509689745.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:45.782Z,1509689745.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:46.165Z,1509689746.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:46.181Z,1509689746.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:46.565Z,1509689746.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:46.587Z,1509689746.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:46.962Z,1509689746.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:46.977Z,1509689746.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:47.360Z,1509689747.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:47.375Z,1509689747.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:47.763Z,1509689747.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:47.778Z,1509689747.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:48.162Z,1509689748.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:48.177Z,1509689748.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:48.565Z,1509689748.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:48.581Z,1509689748.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:48.969Z,1509689748.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:48.990Z,1509689748.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:49.364Z,1509689749.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:49.383Z,1509689749.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:49.760Z,1509689749.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:49.775Z,1509689749.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:50.162Z,1509689750.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:50.177Z,1509689750.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:50.562Z,1509689750.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:50.577Z,1509689750.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:50.961Z,1509689750.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:50.976Z,1509689750.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:51.362Z,1509689751.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:51.377Z,1509689751.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:51.766Z,1509689751.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:51.781Z,1509689751.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:52.167Z,1509689752.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:52.211Z,1509689752.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:52.566Z,1509689752.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:52.581Z,1509689752.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:52.961Z,1509689752.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:52.976Z,1509689752.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:53.360Z,1509689753.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:53.375Z,1509689753.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:53.759Z,1509689753.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:53.779Z,1509689753.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:54.162Z,1509689754.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:54.178Z,1509689754.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:54.566Z,1509689754.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:54.581Z,1509689754.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:54.965Z,1509689754.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:54.981Z,1509689754.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:55.366Z,1509689755.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:55.381Z,1509689755.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:55.760Z,1509689755.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:55.775Z,1509689755.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:56.163Z,1509689756.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:56.178Z,1509689756.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:56.561Z,1509689756.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:56.576Z,1509689756.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:56.961Z,1509689756.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:57.042Z,1509689757.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:57.361Z,1509689757.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:57.376Z,1509689757.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:57.773Z,1509689757.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:57.810Z,1509689757.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:58.172Z,1509689758.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:58.219Z,1509689758.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:58.574Z,1509689758.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:58.589Z,1509689758.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:58.959Z,1509689758.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:59.018Z,1509689759.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:59.361Z,1509689759.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:59.418Z,1509689759.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:15:59.763Z,1509689759.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:15:59.791Z,1509689759.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:00.162Z,1509689760.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:00.186Z,1509689760.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:00.574Z,1509689760.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:00.598Z,1509689760.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:00.983Z,1509689760.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:01.022Z,1509689761.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:01.372Z,1509689761.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:01.391Z,1509689761.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:01.752Z,1509689761.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:01.792Z,1509689761.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:02.151Z,1509689762.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:02.183Z,1509689762.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:02.561Z,1509689762.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:02.591Z,1509689762.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:02.970Z,1509689762.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:02.985Z,1509689762.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:03.375Z,1509689763.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:03.404Z,1509689763.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:03.765Z,1509689763.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:03.780Z,1509689763.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:04.211Z,1509689764.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:04.314Z,1509689764.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:04.573Z,1509689764.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:04.616Z,1509689764.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:04.962Z,1509689764.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:05.027Z,1509689765.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:05.391Z,1509689765.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:05.435Z,1509689765.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:05.762Z,1509689765.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:05.791Z,1509689765.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:06.175Z,1509689766.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:06.195Z,1509689766.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:06.571Z,1509689766.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:06.611Z,1509689766.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:06.975Z,1509689766.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:06.995Z,1509689766.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:07.371Z,1509689767.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:07.395Z,1509689767.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:07.752Z,1509689767.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:07.791Z,1509689767.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:08.152Z,1509689768.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:08.207Z,1509689768.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:08.578Z,1509689768.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:08.602Z,1509689768.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:08.961Z,1509689768.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:09.003Z,1509689769.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:09.363Z,1509689769.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:09.414Z,1509689769.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:09.768Z,1509689769.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:09.836Z,1509689769.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:10.164Z,1509689770.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:10.219Z,1509689770.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:10.552Z,1509689770.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:10.570Z,1509689770.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:10.954Z,1509689770.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:10.997Z,1509689770.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:11.352Z,1509689771.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:11.439Z,1509689771.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:11.770Z,1509689771.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:11.854Z,1509689771.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:12.183Z,1509689772.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:12.215Z,1509689772.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:12.573Z,1509689772.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:12.603Z,1509689772.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:12.959Z,1509689772.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:13.002Z,1509689773.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:13.360Z,1509689773.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:13.375Z,1509689773.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:13.760Z,1509689773.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:13.806Z,1509689773.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:14.160Z,1509689774.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:14.202Z,1509689774.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:14.565Z,1509689774.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:14.581Z,1509689774.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:14.965Z,1509689774.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:14.980Z,1509689774.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:15.373Z,1509689775.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:15.403Z,1509689775.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:15.760Z,1509689775.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:15.775Z,1509689775.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:16.159Z,1509689776.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:16.174Z,1509689776.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:16.557Z,1509689776.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:16.572Z,1509689776.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:16.960Z,1509689776.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:16.975Z,1509689776.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:17.360Z,1509689777.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:17.374Z,1509689777.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:17.765Z,1509689777.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:17.802Z,1509689777.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:18.173Z,1509689778.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:18.201Z,1509689778.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:18.565Z,1509689778.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:18.580Z,1509689778.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:18.960Z,1509689778.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:18.975Z,1509689778.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:19.360Z,1509689779.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:19.375Z,1509689779.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:19.760Z,1509689779.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:19.775Z,1509689779.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:20.160Z,1509689780.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:20.175Z,1509689780.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:20.566Z,1509689780.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:20.582Z,1509689780.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:20.966Z,1509689780.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:21.002Z,1509689781.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:21.361Z,1509689781.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:21.382Z,1509689781.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:21.758Z,1509689781.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:21.777Z,1509689781.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:22.161Z,1509689782.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:22.206Z,1509689782.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:22.560Z,1509689782.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:22.574Z,1509689782.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:22.960Z,1509689782.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:22.975Z,1509689782.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:23.359Z,1509689783.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:23.374Z,1509689783.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:23.761Z,1509689783.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:23.782Z,1509689783.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:24.165Z,1509689784.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:24.180Z,1509689784.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:24.184Z,1509689784.184 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T06:16:24.184Z,1509689784.184 [Default:CheckIn:C.Wait] Stopped
2017-11-03T06:16:24.184Z,1509689784.184 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T06:16:24.184Z,1509689784.184 [Default:CheckIn:D] Running Loop=1
2017-11-03T06:16:24.565Z,1509689784.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:24.580Z,1509689784.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:24.584Z,1509689784.584 [Default:CheckIn:D] Stopped
2017-11-03T06:16:24.584Z,1509689784.584 [Default:CheckIn:E] Running Loop=1
2017-11-03T06:16:24.960Z,1509689784.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:24.975Z,1509689784.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:24.979Z,1509689784.979 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 361.283626 min 
2017-11-03T06:16:24.979Z,1509689784.979 [Default:CheckIn:E] Stopped
2017-11-03T06:16:24.979Z,1509689784.979 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T06:16:24.979Z,1509689784.979 [Default:CheckIn] Stopped
2017-11-03T06:16:24.979Z,1509689784.979 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T06:16:24.979Z,1509689784.979 [Default:CheckIn](INFO): Running loop #36
2017-11-03T06:16:24.980Z,1509689784.980 [Default:CheckIn] Running Loop=36
2017-11-03T06:16:24.980Z,1509689784.980 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T06:16:24.980Z,1509689784.980 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T06:16:28.110Z,1509689788.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:28.186Z,1509689788.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:28.330Z,1509689788.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:28.367Z,1509689788.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:28.737Z,1509689788.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:28.767Z,1509689788.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:29.145Z,1509689789.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:29.199Z,1509689789.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:29.537Z,1509689789.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:29.570Z,1509689789.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:29.924Z,1509689789.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:29.966Z,1509689789.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:30.324Z,1509689790.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:30.371Z,1509689790.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:30.728Z,1509689790.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:30.742Z,1509689790.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:31.124Z,1509689791.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:31.139Z,1509689791.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:31.537Z,1509689791.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:31.567Z,1509689791.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:31.941Z,1509689791.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:31.964Z,1509689791.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:32.337Z,1509689792.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:32.367Z,1509689792.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:32.724Z,1509689792.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:32.739Z,1509689792.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:33.128Z,1509689793.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:33.142Z,1509689793.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:33.524Z,1509689793.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:33.539Z,1509689793.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:33.924Z,1509689793.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:33.939Z,1509689793.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:34.321Z,1509689794.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:34.335Z,1509689794.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:34.732Z,1509689794.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:34.747Z,1509689794.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:35.137Z,1509689795.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:35.153Z,1509689795.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:35.534Z,1509689795.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:35.567Z,1509689795.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:35.916Z,1509689795.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:35.932Z,1509689795.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:36.323Z,1509689796.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:36.343Z,1509689796.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:36.723Z,1509689796.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:36.738Z,1509689796.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:37.116Z,1509689797.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:37.131Z,1509689797.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:37.534Z,1509689797.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:37.550Z,1509689797.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:37.937Z,1509689797.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:37.952Z,1509689797.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:38.333Z,1509689798.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:38.351Z,1509689798.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:38.719Z,1509689798.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:38.739Z,1509689798.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:39.122Z,1509689799.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:39.137Z,1509689799.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:39.538Z,1509689799.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:39.565Z,1509689799.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:39.921Z,1509689799.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:39.943Z,1509689799.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:40.322Z,1509689800.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:40.337Z,1509689800.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:40.733Z,1509689800.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:40.748Z,1509689800.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:41.133Z,1509689801.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:41.149Z,1509689801.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:41.533Z,1509689801.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:41.554Z,1509689801.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:41.920Z,1509689801.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:41.935Z,1509689801.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:42.323Z,1509689802.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:42.363Z,1509689802.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:42.721Z,1509689802.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:42.735Z,1509689802.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:43.115Z,1509689803.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:43.174Z,1509689803.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:43.530Z,1509689803.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:43.551Z,1509689803.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:43.933Z,1509689803.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:43.986Z,1509689803.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:44.326Z,1509689804.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:44.382Z,1509689804.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:44.720Z,1509689804.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:44.735Z,1509689804.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:45.120Z,1509689805.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:45.134Z,1509689805.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:45.519Z,1509689805.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:45.534Z,1509689805.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:45.921Z,1509689805.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:45.936Z,1509689805.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:46.319Z,1509689806.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:46.334Z,1509689806.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:46.733Z,1509689806.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:46.758Z,1509689806.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:47.134Z,1509689807.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:47.157Z,1509689807.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:47.534Z,1509689807.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:47.557Z,1509689807.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:47.919Z,1509689807.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:47.934Z,1509689807.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:48.320Z,1509689808.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:48.335Z,1509689808.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:48.723Z,1509689808.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:48.739Z,1509689808.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:49.120Z,1509689809.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:49.134Z,1509689809.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:49.533Z,1509689809.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:49.557Z,1509689809.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:49.933Z,1509689809.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:49.958Z,1509689809.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:50.333Z,1509689810.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:50.358Z,1509689810.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:50.723Z,1509689810.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:50.761Z,1509689810.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:51.123Z,1509689811.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:51.159Z,1509689811.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:51.520Z,1509689811.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:51.535Z,1509689811.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:51.920Z,1509689811.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:51.935Z,1509689811.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:52.321Z,1509689812.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:52.336Z,1509689812.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:52.733Z,1509689812.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:52.759Z,1509689812.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:53.134Z,1509689813.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:53.157Z,1509689813.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:53.538Z,1509689813.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:53.567Z,1509689813.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:53.925Z,1509689813.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:53.959Z,1509689813.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:54.321Z,1509689814.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:54.336Z,1509689814.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:54.724Z,1509689814.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:54.782Z,1509689814.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:55.121Z,1509689815.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:55.161Z,1509689815.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:55.534Z,1509689815.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:55.557Z,1509689815.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:55.937Z,1509689815.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:55.967Z,1509689815.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:56.338Z,1509689816.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:56.383Z,1509689816.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:56.721Z,1509689816.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:56.737Z,1509689816.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:57.121Z,1509689817.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:57.136Z,1509689817.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:57.520Z,1509689817.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:57.582Z,1509689817.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:57.921Z,1509689817.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:57.936Z,1509689817.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:57.936Z,1509689817.936 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 121
2017-11-03T06:16:57.936Z,1509689817.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:16:57.938Z,1509689817.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:57.939Z,1509689817.939 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 121
2017-11-03T06:16:57.939Z,1509689817.939 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:16:57.961Z,1509689817.961 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:57.961Z,1509689817.961 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121
2017-11-03T06:16:57.961Z,1509689817.961 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:16:58.056Z,1509689818.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:16:58.057Z,1509689818.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:16:58.057Z,1509689818.057 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:16:58.327Z,1509689818.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:58.458Z,1509689818.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:16:58.458Z,1509689818.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 121
2017-11-03T06:16:58.458Z,1509689818.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:16:58.458Z,1509689818.458 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 121
2017-11-03T06:16:58.459Z,1509689818.459 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:16:58.459Z,1509689818.459 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121
2017-11-03T06:16:58.737Z,1509689818.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:58.786Z,1509689818.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:16:58.787Z,1509689818.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:16:58.787Z,1509689818.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:16:58.787Z,1509689818.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:16:58.788Z,1509689818.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:16:58.788Z,1509689818.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:16:58.789Z,1509689818.789 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:16:58.789Z,1509689818.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:16:58.789Z,1509689818.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:16:59.134Z,1509689819.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:59.165Z,1509689819.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:16:59.166Z,1509689819.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:59.538Z,1509689819.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:59.561Z,1509689819.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:16:59.562Z,1509689819.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:16:59.919Z,1509689819.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:16:59.934Z,1509689819.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:16:59.935Z,1509689819.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:00.319Z,1509689820.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:00.339Z,1509689820.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:17:00.340Z,1509689820.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:00.724Z,1509689820.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:00.739Z,1509689820.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:17:00.740Z,1509689820.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:01.119Z,1509689821.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:01.133Z,1509689821.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:17:01.134Z,1509689821.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:01.533Z,1509689821.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:01.564Z,1509689821.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:17:01.565Z,1509689821.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:01.937Z,1509689821.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:01.962Z,1509689821.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:17:01.963Z,1509689821.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:02.333Z,1509689822.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:02.366Z,1509689822.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:17:02.367Z,1509689822.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:02.719Z,1509689822.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:02.738Z,1509689822.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:17:02.739Z,1509689822.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:03.123Z,1509689823.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:03.138Z,1509689823.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:17:03.139Z,1509689823.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:03.519Z,1509689823.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:03.533Z,1509689823.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:17:03.534Z,1509689823.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:03.928Z,1509689823.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:03.942Z,1509689823.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:17:03.943Z,1509689823.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:04.323Z,1509689824.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:04.338Z,1509689824.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:17:04.339Z,1509689824.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:04.733Z,1509689824.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:04.763Z,1509689824.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:17:04.764Z,1509689824.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:05.133Z,1509689825.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:05.164Z,1509689825.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:17:05.165Z,1509689825.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:05.537Z,1509689825.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:05.561Z,1509689825.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:17:05.562Z,1509689825.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:05.927Z,1509689825.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:05.941Z,1509689825.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:17:05.942Z,1509689825.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:06.319Z,1509689826.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:06.338Z,1509689826.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:17:06.339Z,1509689826.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:06.724Z,1509689826.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:06.739Z,1509689826.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:17:06.740Z,1509689826.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:07.127Z,1509689827.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:07.141Z,1509689827.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:17:07.142Z,1509689827.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:07.533Z,1509689827.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:07.563Z,1509689827.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:17:07.564Z,1509689827.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:07.941Z,1509689827.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:07.970Z,1509689827.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:17:07.971Z,1509689827.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:08.337Z,1509689828.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:08.362Z,1509689828.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:17:08.363Z,1509689828.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:08.720Z,1509689828.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:08.734Z,1509689828.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:17:08.735Z,1509689828.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:09.124Z,1509689829.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:09.139Z,1509689829.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:17:09.140Z,1509689829.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:09.527Z,1509689829.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:09.582Z,1509689829.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:17:09.583Z,1509689829.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:09.925Z,1509689829.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:09.939Z,1509689829.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:17:09.940Z,1509689829.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:10.328Z,1509689830.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:10.342Z,1509689830.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:17:10.343Z,1509689830.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:10.741Z,1509689830.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:10.783Z,1509689830.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:17:10.784Z,1509689830.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:11.129Z,1509689831.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:11.144Z,1509689831.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:17:11.145Z,1509689831.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:11.541Z,1509689831.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:11.570Z,1509689831.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:17:11.571Z,1509689831.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:11.926Z,1509689831.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:11.969Z,1509689831.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T06:17:11.970Z,1509689831.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:12.328Z,1509689832.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:12.342Z,1509689832.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:17:12.343Z,1509689832.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:12.726Z,1509689832.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:12.774Z,1509689832.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T06:17:12.775Z,1509689832.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:13.129Z,1509689833.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:13.170Z,1509689833.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:17:13.171Z,1509689833.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:13.530Z,1509689833.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:13.544Z,1509689833.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T06:17:13.545Z,1509689833.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:13.933Z,1509689833.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:13.948Z,1509689833.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T06:17:13.949Z,1509689833.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:14.340Z,1509689834.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:14.372Z,1509689834.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T06:17:14.373Z,1509689834.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:14.729Z,1509689834.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:14.743Z,1509689834.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T06:17:14.744Z,1509689834.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:15.128Z,1509689835.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:15.142Z,1509689835.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T06:17:15.143Z,1509689835.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:15.527Z,1509689835.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:15.542Z,1509689835.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T06:17:15.543Z,1509689835.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:15.928Z,1509689835.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:15.944Z,1509689835.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T06:17:15.945Z,1509689835.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:16.327Z,1509689836.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:16.343Z,1509689836.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T06:17:16.344Z,1509689836.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:16.742Z,1509689836.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:16.770Z,1509689836.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T06:17:16.771Z,1509689836.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:17.130Z,1509689837.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:17.151Z,1509689837.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T06:17:17.152Z,1509689837.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:17.542Z,1509689837.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:17.570Z,1509689837.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T06:17:17.571Z,1509689837.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:17.922Z,1509689837.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:17.942Z,1509689837.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:18.330Z,1509689838.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:18.345Z,1509689838.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:18.729Z,1509689838.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:18.743Z,1509689838.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:19.123Z,1509689839.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:19.146Z,1509689839.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:19.531Z,1509689839.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:19.551Z,1509689839.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:19.934Z,1509689839.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:19.949Z,1509689839.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:20.333Z,1509689840.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:20.348Z,1509689840.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:20.730Z,1509689840.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:20.745Z,1509689840.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:21.128Z,1509689841.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:21.143Z,1509689841.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:21.530Z,1509689841.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:21.545Z,1509689841.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:21.930Z,1509689841.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:21.946Z,1509689841.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:22.327Z,1509689842.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:22.343Z,1509689842.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:22.733Z,1509689842.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:22.748Z,1509689842.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:23.138Z,1509689843.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:23.153Z,1509689843.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:23.534Z,1509689843.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:23.555Z,1509689843.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:23.930Z,1509689843.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:23.983Z,1509689843.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:24.324Z,1509689844.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:24.339Z,1509689844.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:24.730Z,1509689844.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:24.802Z,1509689844.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:25.132Z,1509689845.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:25.146Z,1509689845.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:28.223Z,1509689848.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:28.285Z,1509689848.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:28.437Z,1509689848.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:28.483Z,1509689848.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:28.834Z,1509689848.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:28.890Z,1509689848.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:29.211Z,1509689849.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:29.267Z,1509689849.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:29.615Z,1509689849.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:29.645Z,1509689849.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:30.012Z,1509689850.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:30.046Z,1509689850.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:30.433Z,1509689850.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:30.448Z,1509689850.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:30.836Z,1509689850.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:30.855Z,1509689850.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:31.229Z,1509689851.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:31.247Z,1509689851.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:31.615Z,1509689851.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:31.641Z,1509689851.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:32.012Z,1509689852.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:32.046Z,1509689852.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:32.433Z,1509689852.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:32.451Z,1509689852.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:32.826Z,1509689852.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:32.850Z,1509689852.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:33.233Z,1509689853.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:33.248Z,1509689853.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:33.609Z,1509689853.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:33.638Z,1509689853.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:34.015Z,1509689854.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:34.040Z,1509689854.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:34.433Z,1509689854.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:34.451Z,1509689854.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:34.833Z,1509689854.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:34.854Z,1509689854.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:35.233Z,1509689855.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:35.248Z,1509689855.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:35.613Z,1509689855.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:35.638Z,1509689855.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:36.014Z,1509689856.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:36.044Z,1509689856.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:36.429Z,1509689856.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:36.444Z,1509689856.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:36.833Z,1509689856.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:36.848Z,1509689856.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:37.233Z,1509689857.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:37.251Z,1509689857.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:37.616Z,1509689857.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:37.645Z,1509689857.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:38.012Z,1509689858.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:38.042Z,1509689858.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:38.430Z,1509689858.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:38.445Z,1509689858.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:38.828Z,1509689858.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:38.845Z,1509689858.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:39.233Z,1509689859.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:39.251Z,1509689859.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:39.613Z,1509689859.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:39.638Z,1509689859.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:40.015Z,1509689860.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:40.068Z,1509689860.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:40.433Z,1509689860.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:40.451Z,1509689860.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:40.839Z,1509689860.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:40.855Z,1509689860.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:41.233Z,1509689861.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:41.307Z,1509689861.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:41.613Z,1509689861.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:41.640Z,1509689861.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:42.014Z,1509689862.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:42.070Z,1509689862.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:42.432Z,1509689862.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:42.451Z,1509689862.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:42.833Z,1509689862.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:42.887Z,1509689862.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:43.230Z,1509689863.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:43.288Z,1509689863.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:43.616Z,1509689863.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:43.643Z,1509689863.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:44.013Z,1509689864.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:44.045Z,1509689864.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:44.434Z,1509689864.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:44.449Z,1509689864.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:44.839Z,1509689864.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:44.862Z,1509689864.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:45.234Z,1509689865.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:45.253Z,1509689865.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:45.609Z,1509689865.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:45.646Z,1509689865.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:46.015Z,1509689866.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:46.042Z,1509689866.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:46.426Z,1509689866.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:46.449Z,1509689866.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:46.835Z,1509689866.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:46.857Z,1509689866.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:47.218Z,1509689867.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:47.249Z,1509689867.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:47.609Z,1509689867.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:47.640Z,1509689867.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:48.012Z,1509689868.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:48.047Z,1509689868.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:48.426Z,1509689868.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:48.456Z,1509689868.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:48.842Z,1509689868.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:48.858Z,1509689868.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:49.226Z,1509689869.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:49.269Z,1509689869.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:49.613Z,1509689869.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:49.645Z,1509689869.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:50.012Z,1509689870.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:50.027Z,1509689870.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:50.426Z,1509689870.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:50.459Z,1509689870.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:50.826Z,1509689870.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:50.855Z,1509689870.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:51.221Z,1509689871.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:51.236Z,1509689871.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:51.617Z,1509689871.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:51.631Z,1509689871.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:52.011Z,1509689872.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:52.027Z,1509689872.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:52.421Z,1509689872.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:52.460Z,1509689872.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:52.830Z,1509689872.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:52.866Z,1509689872.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:53.230Z,1509689873.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:53.265Z,1509689873.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:53.616Z,1509689873.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:53.624Z,1509689873.624 [BPC1](ERROR): Failed to parse message.
2017-11-03T06:17:53.624Z,1509689873.624 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T06:17:53.624Z,1509689873.624 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:17:53.624Z,1509689873.624 [BPC1](ERROR): Data Fault
2017-11-03T06:17:53.642Z,1509689873.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:53.761Z,1509689873.761 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:17:54.023Z,1509689874.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:54.038Z,1509689874.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:54.425Z,1509689874.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:54.440Z,1509689874.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:54.829Z,1509689874.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:54.844Z,1509689874.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:54.965Z,1509689874.965 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:17:54.965Z,1509689874.965 [BPC1] No Fault, FailCount= 1
2017-11-03T06:17:55.228Z,1509689875.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:55.314Z,1509689875.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:55.623Z,1509689875.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:55.643Z,1509689875.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:56.019Z,1509689876.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:56.033Z,1509689876.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:56.428Z,1509689876.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:56.478Z,1509689876.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:56.828Z,1509689876.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:56.846Z,1509689876.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:57.227Z,1509689877.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:57.246Z,1509689877.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:57.622Z,1509689877.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:57.637Z,1509689877.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:58.022Z,1509689878.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:58.043Z,1509689878.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:58.428Z,1509689878.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:58.447Z,1509689878.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:58.849Z,1509689878.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:58.883Z,1509689878.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:59.228Z,1509689879.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:59.243Z,1509689879.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:17:59.620Z,1509689879.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:17:59.634Z,1509689879.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:00.023Z,1509689880.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:00.045Z,1509689880.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:00.428Z,1509689880.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:00.443Z,1509689880.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:00.829Z,1509689880.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:00.844Z,1509689880.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:01.229Z,1509689881.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:01.244Z,1509689881.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:01.624Z,1509689881.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:01.643Z,1509689881.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:02.022Z,1509689882.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:02.037Z,1509689882.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:02.428Z,1509689882.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:02.443Z,1509689882.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:02.828Z,1509689882.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:02.844Z,1509689882.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:03.227Z,1509689883.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:03.247Z,1509689883.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:03.624Z,1509689883.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:03.640Z,1509689883.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:04.022Z,1509689884.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:04.043Z,1509689884.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:04.427Z,1509689884.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:04.450Z,1509689884.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:04.828Z,1509689884.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:04.848Z,1509689884.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:05.227Z,1509689885.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:05.247Z,1509689885.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:05.622Z,1509689885.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:05.637Z,1509689885.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:06.020Z,1509689886.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:06.035Z,1509689886.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:06.427Z,1509689886.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:06.446Z,1509689886.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:06.829Z,1509689886.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:06.844Z,1509689886.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:07.228Z,1509689887.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:07.250Z,1509689887.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:07.623Z,1509689887.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:07.679Z,1509689887.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:08.021Z,1509689888.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:08.038Z,1509689888.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:08.432Z,1509689888.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:08.455Z,1509689888.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:08.828Z,1509689888.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:08.843Z,1509689888.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:09.231Z,1509689889.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:09.248Z,1509689889.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:09.621Z,1509689889.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:09.637Z,1509689889.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:10.017Z,1509689890.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:10.032Z,1509689890.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:10.422Z,1509689890.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:10.436Z,1509689890.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:10.812Z,1509689890.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:10.843Z,1509689890.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:11.215Z,1509689891.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:11.249Z,1509689891.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:11.633Z,1509689891.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:11.642Z,1509689891.642 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:18:11.642Z,1509689891.642 [BPC1] Communications Fault, FailCount= 2
2017-11-03T06:18:11.642Z,1509689891.642 [BPC1](ERROR): Communications Fault
2017-11-03T06:18:11.649Z,1509689891.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:11.757Z,1509689891.757 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:18:12.038Z,1509689892.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:12.053Z,1509689892.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:12.422Z,1509689892.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:12.454Z,1509689892.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:12.808Z,1509689892.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:12.822Z,1509689892.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:12.934Z,1509689892.934 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:18:12.934Z,1509689892.934 [BPC1] No Fault, FailCount= 2
2017-11-03T06:18:13.215Z,1509689893.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:13.299Z,1509689893.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:13.615Z,1509689893.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:13.645Z,1509689893.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:14.012Z,1509689894.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:14.048Z,1509689894.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:14.434Z,1509689894.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:14.491Z,1509689894.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:14.821Z,1509689894.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:14.851Z,1509689894.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:15.221Z,1509689895.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:15.245Z,1509689895.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:15.616Z,1509689895.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:15.654Z,1509689895.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:16.014Z,1509689896.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:16.049Z,1509689896.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:16.433Z,1509689896.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:16.448Z,1509689896.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:16.838Z,1509689896.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:16.853Z,1509689896.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:17.233Z,1509689897.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:17.251Z,1509689897.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:17.615Z,1509689897.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:17.648Z,1509689897.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:18.015Z,1509689898.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:18.046Z,1509689898.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:18.422Z,1509689898.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:18.455Z,1509689898.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:18.836Z,1509689898.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:18.855Z,1509689898.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:19.235Z,1509689899.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:19.253Z,1509689899.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:19.615Z,1509689899.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:19.645Z,1509689899.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:20.008Z,1509689900.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:20.022Z,1509689900.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:20.434Z,1509689900.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:20.453Z,1509689900.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:20.821Z,1509689900.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:20.850Z,1509689900.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:21.233Z,1509689901.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:21.254Z,1509689901.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:21.616Z,1509689901.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:21.646Z,1509689901.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:22.011Z,1509689902.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:22.043Z,1509689902.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:22.425Z,1509689902.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:22.455Z,1509689902.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:22.850Z,1509689902.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:22.866Z,1509689902.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:23.226Z,1509689903.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:23.252Z,1509689903.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:23.613Z,1509689903.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:23.648Z,1509689903.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:24.013Z,1509689904.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:24.029Z,1509689904.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:24.427Z,1509689904.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:24.456Z,1509689904.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:24.827Z,1509689904.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:24.858Z,1509689904.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:25.227Z,1509689905.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:25.264Z,1509689905.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:28.303Z,1509689908.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:28.367Z,1509689908.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:28.503Z,1509689908.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:28.524Z,1509689908.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:28.913Z,1509689908.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:28.935Z,1509689908.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:29.312Z,1509689909.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:29.363Z,1509689909.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:29.709Z,1509689909.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:29.724Z,1509689909.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:30.098Z,1509689910.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:30.154Z,1509689910.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:30.504Z,1509689910.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:30.562Z,1509689910.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:30.904Z,1509689910.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:30.919Z,1509689910.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:31.305Z,1509689911.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:31.321Z,1509689911.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:31.713Z,1509689911.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:31.735Z,1509689911.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:32.112Z,1509689912.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:32.128Z,1509689912.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:32.513Z,1509689912.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:32.529Z,1509689912.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:32.902Z,1509689912.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:32.920Z,1509689912.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:33.302Z,1509689913.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:33.318Z,1509689913.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:33.703Z,1509689913.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:33.719Z,1509689913.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:34.098Z,1509689914.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:34.113Z,1509689914.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:34.511Z,1509689914.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:34.527Z,1509689914.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:34.912Z,1509689914.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:34.927Z,1509689914.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:35.311Z,1509689915.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:35.327Z,1509689915.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:35.699Z,1509689915.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:35.719Z,1509689915.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:36.103Z,1509689916.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:36.118Z,1509689916.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:36.502Z,1509689916.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:36.523Z,1509689916.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:36.900Z,1509689916.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:36.915Z,1509689916.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:37.302Z,1509689917.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:37.318Z,1509689917.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:37.712Z,1509689917.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:37.728Z,1509689917.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:38.111Z,1509689918.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:38.127Z,1509689918.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:38.512Z,1509689918.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:38.528Z,1509689918.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:38.902Z,1509689918.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:38.923Z,1509689918.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:39.299Z,1509689919.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:39.313Z,1509689919.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:39.704Z,1509689919.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:39.719Z,1509689919.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:40.102Z,1509689920.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:40.123Z,1509689920.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:40.512Z,1509689920.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:40.528Z,1509689920.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:40.912Z,1509689920.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:40.934Z,1509689920.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:41.309Z,1509689921.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:41.386Z,1509689921.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:41.694Z,1509689921.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:41.719Z,1509689921.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:42.094Z,1509689922.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:42.142Z,1509689922.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:42.492Z,1509689922.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:42.522Z,1509689922.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:42.895Z,1509689922.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:42.943Z,1509689922.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:43.294Z,1509689923.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:43.343Z,1509689923.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:43.712Z,1509689923.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:43.728Z,1509689923.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:44.112Z,1509689924.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:44.134Z,1509689924.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:44.513Z,1509689924.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:44.529Z,1509689924.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:44.895Z,1509689924.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:44.921Z,1509689924.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:45.292Z,1509689925.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:45.323Z,1509689925.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:45.695Z,1509689925.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:45.721Z,1509689925.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:46.091Z,1509689926.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:46.119Z,1509689926.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:46.518Z,1509689926.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:46.532Z,1509689926.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:46.918Z,1509689926.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:46.933Z,1509689926.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:47.313Z,1509689927.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:47.335Z,1509689927.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:47.695Z,1509689927.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:47.726Z,1509689927.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:48.095Z,1509689928.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:48.127Z,1509689928.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:48.492Z,1509689928.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:48.528Z,1509689928.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:48.892Z,1509689928.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:48.927Z,1509689928.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:49.294Z,1509689929.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:49.328Z,1509689929.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:49.713Z,1509689929.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:49.730Z,1509689929.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:50.113Z,1509689930.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:50.134Z,1509689930.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:50.513Z,1509689930.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:50.530Z,1509689930.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:50.892Z,1509689930.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:50.927Z,1509689930.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:51.292Z,1509689931.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:51.326Z,1509689931.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:51.695Z,1509689931.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:51.730Z,1509689931.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:52.099Z,1509689932.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:52.131Z,1509689932.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:52.505Z,1509689932.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:52.529Z,1509689932.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:52.909Z,1509689932.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:52.938Z,1509689932.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:53.306Z,1509689933.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:53.330Z,1509689933.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:53.691Z,1509689933.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:53.771Z,1509689933.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:54.094Z,1509689934.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:54.109Z,1509689934.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:54.495Z,1509689934.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:54.551Z,1509689934.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:54.894Z,1509689934.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:54.909Z,1509689934.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:55.292Z,1509689935.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:55.334Z,1509689935.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:55.705Z,1509689935.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:55.730Z,1509689935.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:56.109Z,1509689936.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:56.174Z,1509689936.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:56.509Z,1509689936.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:56.534Z,1509689936.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:56.891Z,1509689936.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:56.911Z,1509689936.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:57.294Z,1509689937.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:57.333Z,1509689937.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:57.692Z,1509689937.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:57.706Z,1509689937.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:58.097Z,1509689938.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:58.112Z,1509689938.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:58.505Z,1509689938.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:58.536Z,1509689938.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:58.909Z,1509689938.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:58.941Z,1509689938.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:59.305Z,1509689939.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:59.337Z,1509689939.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:18:59.696Z,1509689939.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:18:59.711Z,1509689939.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:00.096Z,1509689940.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:00.110Z,1509689940.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:00.496Z,1509689940.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:00.511Z,1509689940.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:00.896Z,1509689940.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:00.911Z,1509689940.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:01.296Z,1509689941.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:01.311Z,1509689941.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:01.710Z,1509689941.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:01.763Z,1509689941.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:02.110Z,1509689942.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:02.140Z,1509689942.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:02.509Z,1509689942.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:02.539Z,1509689942.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:02.896Z,1509689942.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:02.911Z,1509689942.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:03.295Z,1509689943.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:03.315Z,1509689943.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:03.698Z,1509689943.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:03.712Z,1509689943.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:04.096Z,1509689944.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:04.111Z,1509689944.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:04.509Z,1509689944.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:04.541Z,1509689944.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:04.909Z,1509689944.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:04.939Z,1509689944.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:05.309Z,1509689945.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:05.339Z,1509689945.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:05.696Z,1509689945.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:05.711Z,1509689945.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:06.097Z,1509689946.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:06.112Z,1509689946.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:06.497Z,1509689946.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:06.512Z,1509689946.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:06.902Z,1509689946.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:06.951Z,1509689946.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:07.296Z,1509689947.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:07.311Z,1509689947.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:07.709Z,1509689947.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:07.745Z,1509689947.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:08.102Z,1509689948.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:08.155Z,1509689948.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:08.506Z,1509689948.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:08.521Z,1509689948.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:08.901Z,1509689948.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:08.954Z,1509689948.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:09.300Z,1509689949.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:09.347Z,1509689949.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:09.702Z,1509689949.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:09.740Z,1509689949.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:10.091Z,1509689950.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:10.107Z,1509689950.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:10.510Z,1509689950.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:10.543Z,1509689950.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:10.909Z,1509689950.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:10.937Z,1509689950.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:11.310Z,1509689951.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:11.336Z,1509689951.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:11.695Z,1509689951.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:11.711Z,1509689951.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:12.091Z,1509689952.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:12.105Z,1509689952.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:12.496Z,1509689952.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:12.511Z,1509689952.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:12.896Z,1509689952.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:12.911Z,1509689952.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:13.291Z,1509689953.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:13.305Z,1509689953.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:13.705Z,1509689953.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:13.738Z,1509689953.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:14.109Z,1509689954.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:14.135Z,1509689954.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:14.509Z,1509689954.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:14.536Z,1509689954.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:14.899Z,1509689954.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:14.939Z,1509689954.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:15.295Z,1509689955.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:15.310Z,1509689955.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:15.696Z,1509689955.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:15.711Z,1509689955.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:16.095Z,1509689956.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:16.115Z,1509689956.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:16.510Z,1509689956.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:16.534Z,1509689956.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:16.909Z,1509689956.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:16.935Z,1509689956.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:17.310Z,1509689957.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:17.334Z,1509689957.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:17.695Z,1509689957.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:17.711Z,1509689957.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:18.095Z,1509689958.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:18.110Z,1509689958.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:18.491Z,1509689958.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:18.506Z,1509689958.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:18.897Z,1509689958.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:18.912Z,1509689958.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:19.295Z,1509689959.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:19.310Z,1509689959.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:19.710Z,1509689959.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:19.759Z,1509689959.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:20.109Z,1509689960.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:20.135Z,1509689960.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:20.509Z,1509689960.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:20.535Z,1509689960.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:20.896Z,1509689960.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:20.911Z,1509689960.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:21.298Z,1509689961.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:21.355Z,1509689961.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:21.692Z,1509689961.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:21.715Z,1509689961.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:22.096Z,1509689962.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:22.150Z,1509689962.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:22.509Z,1509689962.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:22.540Z,1509689962.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:22.905Z,1509689962.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:22.951Z,1509689962.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:23.309Z,1509689963.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:23.359Z,1509689963.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:23.698Z,1509689963.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:23.719Z,1509689963.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:24.096Z,1509689964.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:24.111Z,1509689964.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:24.492Z,1509689964.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:24.507Z,1509689964.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:24.898Z,1509689964.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:24.913Z,1509689964.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:25.299Z,1509689965.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:25.314Z,1509689965.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:28.402Z,1509689968.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:28.417Z,1509689968.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:28.577Z,1509689968.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:28.592Z,1509689968.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:28.965Z,1509689968.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:28.991Z,1509689968.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:29.359Z,1509689969.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:29.388Z,1509689969.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:29.758Z,1509689969.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:29.784Z,1509689969.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:30.156Z,1509689970.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:30.188Z,1509689970.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:30.579Z,1509689970.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:30.594Z,1509689970.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:30.965Z,1509689970.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:30.995Z,1509689970.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:31.373Z,1509689971.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:31.394Z,1509689971.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:31.753Z,1509689971.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:31.785Z,1509689971.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:32.157Z,1509689972.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:32.189Z,1509689972.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:32.551Z,1509689972.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:32.566Z,1509689972.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:32.959Z,1509689972.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:32.988Z,1509689972.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:33.357Z,1509689973.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:33.383Z,1509689973.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:33.765Z,1509689973.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:33.790Z,1509689973.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:34.165Z,1509689974.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:34.215Z,1509689974.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:34.565Z,1509689974.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:34.590Z,1509689974.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:34.952Z,1509689974.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:34.970Z,1509689974.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:35.352Z,1509689975.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:35.410Z,1509689975.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:35.753Z,1509689975.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:35.768Z,1509689975.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:36.151Z,1509689976.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:36.203Z,1509689976.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:36.565Z,1509689976.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:36.596Z,1509689976.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:36.965Z,1509689976.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:37.011Z,1509689977.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:37.365Z,1509689977.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:37.407Z,1509689977.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:37.752Z,1509689977.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:37.771Z,1509689977.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:38.152Z,1509689978.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:38.167Z,1509689978.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:38.552Z,1509689978.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:38.566Z,1509689978.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:38.952Z,1509689978.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:38.974Z,1509689978.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:39.351Z,1509689979.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:39.371Z,1509689979.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:39.765Z,1509689979.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:39.793Z,1509689979.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:40.169Z,1509689980.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:40.184Z,1509689980.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:40.569Z,1509689980.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:40.604Z,1509689980.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:40.954Z,1509689980.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:40.979Z,1509689980.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:41.356Z,1509689981.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:41.371Z,1509689981.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:41.756Z,1509689981.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:41.771Z,1509689981.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:42.156Z,1509689982.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:42.174Z,1509689982.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:42.570Z,1509689982.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:42.601Z,1509689982.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:42.969Z,1509689982.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:42.984Z,1509689982.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:43.369Z,1509689983.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:43.384Z,1509689983.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:43.756Z,1509689983.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:43.771Z,1509689983.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:44.156Z,1509689984.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:44.171Z,1509689984.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:44.556Z,1509689984.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:44.578Z,1509689984.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:44.956Z,1509689984.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:44.971Z,1509689984.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:45.356Z,1509689985.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:45.371Z,1509689985.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:45.769Z,1509689985.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:45.813Z,1509689985.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:46.169Z,1509689986.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:46.204Z,1509689986.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:46.569Z,1509689986.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:46.600Z,1509689986.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:46.956Z,1509689986.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:46.971Z,1509689986.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:47.358Z,1509689987.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:47.373Z,1509689987.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:47.757Z,1509689987.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:47.779Z,1509689987.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:48.156Z,1509689988.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:48.223Z,1509689988.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:48.570Z,1509689988.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:48.601Z,1509689988.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:48.968Z,1509689988.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:49.015Z,1509689989.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:49.365Z,1509689989.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:49.379Z,1509689989.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:49.760Z,1509689989.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:49.775Z,1509689989.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:50.160Z,1509689990.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:50.211Z,1509689990.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:50.561Z,1509689990.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:50.576Z,1509689990.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:50.961Z,1509689990.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:51.011Z,1509689991.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:51.361Z,1509689991.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:51.376Z,1509689991.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:51.764Z,1509689991.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:51.830Z,1509689991.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:52.167Z,1509689992.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:52.187Z,1509689992.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:52.566Z,1509689992.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:52.581Z,1509689992.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:52.962Z,1509689992.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:52.976Z,1509689992.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:53.361Z,1509689993.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:53.376Z,1509689993.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:53.761Z,1509689993.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:53.777Z,1509689993.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:54.160Z,1509689994.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:54.182Z,1509689994.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:54.566Z,1509689994.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:54.581Z,1509689994.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:54.965Z,1509689994.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:54.981Z,1509689994.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:55.365Z,1509689995.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:55.386Z,1509689995.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:55.759Z,1509689995.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:55.774Z,1509689995.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:56.159Z,1509689996.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:56.174Z,1509689996.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:56.561Z,1509689996.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:56.576Z,1509689996.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:56.957Z,1509689996.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:56.972Z,1509689996.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:57.358Z,1509689997.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:57.373Z,1509689997.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:57.766Z,1509689997.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:57.781Z,1509689997.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:58.165Z,1509689998.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:58.187Z,1509689998.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:58.564Z,1509689998.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:58.579Z,1509689998.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:58.960Z,1509689998.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:58.975Z,1509689998.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:58.975Z,1509689998.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 122
2017-11-03T06:19:58.975Z,1509689998.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:19:58.978Z,1509689998.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:58.978Z,1509689998.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 122
2017-11-03T06:19:58.978Z,1509689998.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:19:58.980Z,1509689998.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:19:58.980Z,1509689998.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122
2017-11-03T06:19:58.980Z,1509689998.980 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:19:59.053Z,1509689999.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:19:59.053Z,1509689999.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:19:59.053Z,1509689999.053 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:19:59.355Z,1509689999.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:59.464Z,1509689999.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:19:59.464Z,1509689999.464 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 122
2017-11-03T06:19:59.465Z,1509689999.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:19:59.465Z,1509689999.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 122
2017-11-03T06:19:59.465Z,1509689999.465 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:19:59.465Z,1509689999.465 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122
2017-11-03T06:19:59.763Z,1509689999.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:19:59.776Z,1509689999.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:19:59.777Z,1509689999.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:19:59.777Z,1509689999.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:19:59.777Z,1509689999.777 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:19:59.778Z,1509689999.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:19:59.778Z,1509689999.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:19:59.778Z,1509689999.778 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:19:59.779Z,1509689999.779 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:19:59.779Z,1509689999.779 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:20:00.172Z,1509690000.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:00.186Z,1509690000.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:20:00.187Z,1509690000.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:00.573Z,1509690000.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:00.588Z,1509690000.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:20:00.589Z,1509690000.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:00.973Z,1509690000.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:00.987Z,1509690000.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:20:00.988Z,1509690000.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:01.374Z,1509690001.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:01.389Z,1509690001.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:20:01.390Z,1509690001.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:01.755Z,1509690001.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:01.781Z,1509690001.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:20:01.782Z,1509690001.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:02.152Z,1509690002.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:02.171Z,1509690002.171 [BPC1](ERROR): Failed to parse message.
2017-11-03T06:20:02.171Z,1509690002.171 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:20:02.171Z,1509690002.171 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:20:02.171Z,1509690002.171 [BPC1](ERROR): Data Fault
2017-11-03T06:20:02.178Z,1509690002.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:20:02.179Z,1509690002.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:02.285Z,1509690002.285 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:20:02.555Z,1509690002.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:02.581Z,1509690002.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:20:02.582Z,1509690002.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:02.956Z,1509690002.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:02.981Z,1509690002.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:20:02.982Z,1509690002.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:03.354Z,1509690003.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:03.378Z,1509690003.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:20:03.379Z,1509690003.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:03.477Z,1509690003.477 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:20:03.477Z,1509690003.477 [BPC1] No Fault, FailCount= 1
2017-11-03T06:20:03.774Z,1509690003.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:03.839Z,1509690003.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T06:20:03.840Z,1509690003.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:04.177Z,1509690004.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:04.191Z,1509690004.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:20:04.193Z,1509690004.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:04.573Z,1509690004.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:04.611Z,1509690004.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:20:04.612Z,1509690004.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:04.952Z,1509690004.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:04.982Z,1509690004.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:20:04.983Z,1509690004.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:05.355Z,1509690005.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:05.379Z,1509690005.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:20:05.381Z,1509690005.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:05.755Z,1509690005.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:05.779Z,1509690005.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:20:05.780Z,1509690005.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:06.152Z,1509690006.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:06.182Z,1509690006.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:20:06.183Z,1509690006.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:06.572Z,1509690006.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:06.594Z,1509690006.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:20:06.595Z,1509690006.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:06.973Z,1509690006.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:06.987Z,1509690006.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:20:06.988Z,1509690006.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:07.374Z,1509690007.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:07.389Z,1509690007.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:20:07.389Z,1509690007.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:07.755Z,1509690007.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:07.779Z,1509690007.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:20:07.781Z,1509690007.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:08.152Z,1509690008.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:08.181Z,1509690008.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:20:08.182Z,1509690008.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:08.553Z,1509690008.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:08.582Z,1509690008.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:20:08.583Z,1509690008.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:08.956Z,1509690008.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:08.981Z,1509690008.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:20:08.982Z,1509690008.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:09.351Z,1509690009.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:09.402Z,1509690009.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:20:09.408Z,1509690009.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:09.775Z,1509690009.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:09.790Z,1509690009.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:20:09.791Z,1509690009.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:10.177Z,1509690010.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:10.192Z,1509690010.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:20:10.193Z,1509690010.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:10.573Z,1509690010.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:10.587Z,1509690010.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:20:10.588Z,1509690010.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:10.953Z,1509690010.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:10.981Z,1509690010.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:20:10.982Z,1509690010.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:11.355Z,1509690011.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:11.381Z,1509690011.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:20:11.382Z,1509690011.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:11.755Z,1509690011.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:11.781Z,1509690011.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:20:11.782Z,1509690011.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:12.152Z,1509690012.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:12.199Z,1509690012.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:20:12.199Z,1509690012.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:12.574Z,1509690012.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:12.589Z,1509690012.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:20:12.590Z,1509690012.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:12.973Z,1509690012.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:12.994Z,1509690012.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T06:20:12.995Z,1509690012.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:13.374Z,1509690013.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:13.394Z,1509690013.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:20:13.395Z,1509690013.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:13.755Z,1509690013.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:13.780Z,1509690013.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T06:20:13.782Z,1509690013.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:14.152Z,1509690014.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:14.185Z,1509690014.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:20:14.186Z,1509690014.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:14.553Z,1509690014.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:14.590Z,1509690014.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T06:20:14.591Z,1509690014.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:14.956Z,1509690014.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:14.981Z,1509690014.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T06:20:14.982Z,1509690014.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:15.354Z,1509690015.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:15.399Z,1509690015.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T06:20:15.400Z,1509690015.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:15.774Z,1509690015.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:15.811Z,1509690015.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T06:20:15.835Z,1509690015.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:16.162Z,1509690016.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:16.194Z,1509690016.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T06:20:16.195Z,1509690016.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:16.561Z,1509690016.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:16.611Z,1509690016.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T06:20:16.612Z,1509690016.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:16.952Z,1509690016.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:16.967Z,1509690016.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T06:20:16.968Z,1509690016.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:17.353Z,1509690017.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:17.367Z,1509690017.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T06:20:17.368Z,1509690017.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:17.753Z,1509690017.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:17.793Z,1509690017.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T06:20:17.794Z,1509690017.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:18.153Z,1509690018.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:18.167Z,1509690018.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T06:20:18.168Z,1509690018.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:18.566Z,1509690018.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:18.633Z,1509690018.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T06:20:18.634Z,1509690018.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:18.965Z,1509690018.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:18.992Z,1509690018.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:19.365Z,1509690019.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:19.434Z,1509690019.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:19.753Z,1509690019.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:19.767Z,1509690019.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:20.152Z,1509690020.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:20.167Z,1509690020.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:20.560Z,1509690020.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:20.594Z,1509690020.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:20.953Z,1509690020.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:20.967Z,1509690020.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:21.365Z,1509690021.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:21.391Z,1509690021.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:21.765Z,1509690021.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:21.793Z,1509690021.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:22.167Z,1509690022.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:22.220Z,1509690022.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:22.555Z,1509690022.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:22.591Z,1509690022.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:22.955Z,1509690022.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:22.991Z,1509690022.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:23.352Z,1509690023.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:23.374Z,1509690023.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:23.765Z,1509690023.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:23.792Z,1509690023.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:24.173Z,1509690024.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:24.203Z,1509690024.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:24.566Z,1509690024.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:24.596Z,1509690024.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:24.954Z,1509690024.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:24.968Z,1509690024.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:25.361Z,1509690025.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:25.375Z,1509690025.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:28.493Z,1509690028.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:28.509Z,1509690028.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:28.619Z,1509690028.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:28.667Z,1509690028.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:29.042Z,1509690029.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:29.063Z,1509690029.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:29.441Z,1509690029.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:29.456Z,1509690029.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:29.840Z,1509690029.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:29.875Z,1509690029.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:30.219Z,1509690030.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:30.250Z,1509690030.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:30.624Z,1509690030.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:30.649Z,1509690030.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:31.020Z,1509690031.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:31.049Z,1509690031.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:31.442Z,1509690031.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:31.499Z,1509690031.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:31.845Z,1509690031.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:31.860Z,1509690031.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:32.241Z,1509690032.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:32.256Z,1509690032.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:32.619Z,1509690032.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:32.670Z,1509690032.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:33.016Z,1509690033.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:33.032Z,1509690033.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:33.422Z,1509690033.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:33.459Z,1509690033.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:33.823Z,1509690033.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:33.875Z,1509690033.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:34.223Z,1509690034.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:34.253Z,1509690034.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:34.641Z,1509690034.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:34.662Z,1509690034.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:35.042Z,1509690035.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:35.063Z,1509690035.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:35.441Z,1509690035.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:35.456Z,1509690035.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:35.820Z,1509690035.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:35.856Z,1509690035.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:36.223Z,1509690036.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:36.254Z,1509690036.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:36.620Z,1509690036.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:36.655Z,1509690036.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:37.023Z,1509690037.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:37.060Z,1509690037.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:37.433Z,1509690037.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:37.467Z,1509690037.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:37.846Z,1509690037.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:37.861Z,1509690037.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:38.234Z,1509690038.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:38.266Z,1509690038.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:38.623Z,1509690038.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:38.654Z,1509690038.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:39.019Z,1509690039.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:39.035Z,1509690039.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:39.423Z,1509690039.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:39.480Z,1509690039.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:39.824Z,1509690039.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:39.839Z,1509690039.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:40.220Z,1509690040.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:40.235Z,1509690040.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:40.637Z,1509690040.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:40.661Z,1509690040.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:41.034Z,1509690041.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:41.059Z,1509690041.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:41.434Z,1509690041.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:41.458Z,1509690041.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:41.819Z,1509690041.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:41.834Z,1509690041.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:42.226Z,1509690042.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:42.262Z,1509690042.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:42.620Z,1509690042.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:42.635Z,1509690042.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:43.019Z,1509690043.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:43.034Z,1509690043.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:43.437Z,1509690043.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:43.461Z,1509690043.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:43.837Z,1509690043.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:43.863Z,1509690043.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:44.229Z,1509690044.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:44.261Z,1509690044.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:44.619Z,1509690044.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:44.634Z,1509690044.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:45.019Z,1509690045.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:45.035Z,1509690045.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:45.419Z,1509690045.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:45.433Z,1509690045.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:45.823Z,1509690045.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:45.838Z,1509690045.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:46.219Z,1509690046.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:46.278Z,1509690046.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:46.629Z,1509690046.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:46.644Z,1509690046.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:47.033Z,1509690047.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:47.064Z,1509690047.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:47.433Z,1509690047.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:47.482Z,1509690047.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:47.819Z,1509690047.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:47.833Z,1509690047.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:48.219Z,1509690048.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:48.264Z,1509690048.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:48.620Z,1509690048.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:48.671Z,1509690048.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:49.019Z,1509690049.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:49.033Z,1509690049.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:49.433Z,1509690049.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:49.464Z,1509690049.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:49.837Z,1509690049.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:49.862Z,1509690049.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:50.236Z,1509690050.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:50.263Z,1509690050.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:50.619Z,1509690050.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:50.634Z,1509690050.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:51.020Z,1509690051.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:51.035Z,1509690051.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:51.419Z,1509690051.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:51.433Z,1509690051.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:51.827Z,1509690051.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:51.842Z,1509690051.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:52.220Z,1509690052.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:52.235Z,1509690052.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:52.333Z,1509690052.333 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:20:52.333Z,1509690052.333 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T06:20:52.449Z,1509690052.449 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:20:52.449Z,1509690052.449 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:20:52.450Z,1509690052.450 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:20:52.450Z,1509690052.450 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:20:52.633Z,1509690052.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:52.660Z,1509690052.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:53.033Z,1509690053.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:53.065Z,1509690053.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:53.433Z,1509690053.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:53.464Z,1509690053.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:53.819Z,1509690053.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:53.834Z,1509690053.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:54.224Z,1509690054.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:54.238Z,1509690054.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:54.625Z,1509690054.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:54.640Z,1509690054.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:55.024Z,1509690055.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:55.038Z,1509690055.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:55.439Z,1509690055.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:55.494Z,1509690055.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:55.843Z,1509690055.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:55.874Z,1509690055.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:56.240Z,1509690056.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:56.279Z,1509690056.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:56.635Z,1509690056.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:56.688Z,1509690056.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:56.738Z,1509690056.738 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:20:56.847Z,1509690056.847 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:20:56.857Z,1509690056.857 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:20:56.858Z,1509690056.858 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:20:56.859Z,1509690056.859 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:20:57.035Z,1509690057.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:57.093Z,1509690057.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:57.428Z,1509690057.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:57.469Z,1509690057.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:57.846Z,1509690057.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:57.883Z,1509690057.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:58.237Z,1509690058.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:58.285Z,1509690058.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:58.631Z,1509690058.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:58.687Z,1509690058.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:59.035Z,1509690059.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:59.077Z,1509690059.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:59.432Z,1509690059.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:59.451Z,1509690059.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:20:59.828Z,1509690059.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:20:59.851Z,1509690059.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:00.229Z,1509690060.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:00.256Z,1509690060.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:00.626Z,1509690060.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:00.715Z,1509690060.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:01.045Z,1509690061.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:01.073Z,1509690061.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:01.435Z,1509690061.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:01.497Z,1509690061.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:01.835Z,1509690061.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:01.903Z,1509690061.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:02.231Z,1509690062.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:02.267Z,1509690062.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:02.646Z,1509690062.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:02.707Z,1509690062.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:03.029Z,1509690063.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:03.069Z,1509690063.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:03.434Z,1509690063.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:03.505Z,1509690063.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:03.829Z,1509690063.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:03.954Z,1509690063.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:04.228Z,1509690064.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:04.247Z,1509690064.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:04.655Z,1509690064.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:04.694Z,1509690064.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:05.035Z,1509690065.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:05.106Z,1509690065.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:05.432Z,1509690065.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:05.471Z,1509690065.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:05.820Z,1509690065.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:05.839Z,1509690065.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:06.219Z,1509690066.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:06.239Z,1509690066.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:06.624Z,1509690066.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:06.667Z,1509690066.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:07.022Z,1509690067.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:07.043Z,1509690067.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:07.435Z,1509690067.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:07.483Z,1509690067.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:07.859Z,1509690067.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:07.895Z,1509690067.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:08.251Z,1509690068.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:08.288Z,1509690068.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:08.628Z,1509690068.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:08.683Z,1509690068.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:09.028Z,1509690069.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:09.051Z,1509690069.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:09.426Z,1509690069.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:09.454Z,1509690069.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:09.846Z,1509690069.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:09.897Z,1509690069.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:10.221Z,1509690070.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:10.267Z,1509690070.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:10.631Z,1509690070.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:10.706Z,1509690070.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:11.035Z,1509690071.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:11.069Z,1509690071.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:11.432Z,1509690071.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:11.469Z,1509690071.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:11.821Z,1509690071.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:11.856Z,1509690071.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:12.231Z,1509690072.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:12.276Z,1509690072.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:12.632Z,1509690072.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:12.676Z,1509690072.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:13.041Z,1509690073.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:13.083Z,1509690073.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:13.434Z,1509690073.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:13.454Z,1509690073.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:13.857Z,1509690073.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:13.900Z,1509690073.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:14.250Z,1509690074.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:14.291Z,1509690074.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:14.620Z,1509690074.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:14.647Z,1509690074.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:15.021Z,1509690075.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:15.146Z,1509690075.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:15.430Z,1509690075.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:15.473Z,1509690075.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:15.830Z,1509690075.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:15.887Z,1509690075.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:16.243Z,1509690076.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:16.283Z,1509690076.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:16.665Z,1509690076.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:16.715Z,1509690076.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:17.103Z,1509690077.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:17.144Z,1509690077.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:17.438Z,1509690077.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:17.467Z,1509690077.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:17.827Z,1509690077.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:17.843Z,1509690077.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:18.223Z,1509690078.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:18.239Z,1509690078.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:18.622Z,1509690078.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:18.643Z,1509690078.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:19.023Z,1509690079.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:19.039Z,1509690079.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:19.438Z,1509690079.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:19.473Z,1509690079.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:19.837Z,1509690079.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:19.874Z,1509690079.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:20.237Z,1509690080.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:20.269Z,1509690080.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:20.624Z,1509690080.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:20.639Z,1509690080.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:21.023Z,1509690081.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:21.038Z,1509690081.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:21.442Z,1509690081.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:21.469Z,1509690081.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:21.829Z,1509690081.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:21.845Z,1509690081.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:22.227Z,1509690082.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:22.243Z,1509690082.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:22.641Z,1509690082.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:22.672Z,1509690082.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:23.033Z,1509690083.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:23.054Z,1509690083.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:23.441Z,1509690083.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:23.472Z,1509690083.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:23.827Z,1509690083.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:23.842Z,1509690083.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:24.228Z,1509690084.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:24.250Z,1509690084.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:24.629Z,1509690084.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:24.643Z,1509690084.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:25.036Z,1509690085.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:25.051Z,1509690085.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:25.054Z,1509690085.054 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T06:16:24.0Z
2017-11-03T06:21:25.054Z,1509690085.054 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T06:21:25.054Z,1509690085.054 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T06:21:25.438Z,1509690085.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:25.453Z,1509690085.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:28.750Z,1509690088.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:28.779Z,1509690088.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:28.926Z,1509690088.926 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171103T001125/Courier0144.lzma
2017-11-03T06:21:28.987Z,1509690088.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:29.066Z,1509690089.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:29.334Z,1509690089.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:29.350Z,1509690089.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:29.707Z,1509690089.707 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0144.lzma.bak
2017-11-03T06:21:29.707Z,1509690089.707 [DataOverHttps](INFO): SBD MOMSN=5182900
2017-11-03T06:21:29.746Z,1509690089.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:29.793Z,1509690089.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:30.341Z,1509690090.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:30.388Z,1509690090.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:30.550Z,1509690090.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:30.565Z,1509690090.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:33.832Z,1509690093.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:33.890Z,1509690093.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:34.030Z,1509690094.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:34.087Z,1509690094.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:34.415Z,1509690094.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:34.482Z,1509690094.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:34.816Z,1509690094.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:34.847Z,1509690094.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:35.215Z,1509690095.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:35.247Z,1509690095.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:35.638Z,1509690095.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:35.659Z,1509690095.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:38.979Z,1509690098.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:38.994Z,1509690098.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:39.092Z,1509690099.092 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20171103T001125/Express0145.lzma
2017-11-03T06:21:39.143Z,1509690099.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:39.184Z,1509690099.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:39.517Z,1509690099.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:39.543Z,1509690099.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:47.585Z,1509690107.585 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0145.lzma.bak
2017-11-03T06:21:47.585Z,1509690107.585 [DataOverHttps](INFO): SBD MOMSN=5182904
2017-11-03T06:21:47.612Z,1509690107.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:47.853Z,1509690107.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:48.258Z,1509690108.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:48.273Z,1509690108.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:48.277Z,1509690108.277 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T06:21:48.277Z,1509690108.277 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T06:21:48.277Z,1509690108.277 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T06:21:48.422Z,1509690108.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:48.471Z,1509690108.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:51.725Z,1509690111.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:51.771Z,1509690111.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:51.849Z,1509690111.849 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T06:21:51.908Z,1509690111.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:51.951Z,1509690111.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:52.286Z,1509690112.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:52.354Z,1509690112.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:52.688Z,1509690112.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:52.752Z,1509690112.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:53.099Z,1509690113.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:53.127Z,1509690113.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:53.504Z,1509690113.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:53.519Z,1509690113.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:53.910Z,1509690113.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:53.947Z,1509690113.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:54.304Z,1509690114.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:54.319Z,1509690114.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:54.692Z,1509690114.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:54.707Z,1509690114.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:55.091Z,1509690115.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:55.106Z,1509690115.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:55.488Z,1509690115.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:55.512Z,1509690115.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:55.895Z,1509690115.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:55.910Z,1509690115.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:56.296Z,1509690116.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:56.319Z,1509690116.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:56.701Z,1509690116.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:56.717Z,1509690116.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:57.109Z,1509690117.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:57.123Z,1509690117.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:57.502Z,1509690117.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:57.517Z,1509690117.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:57.881Z,1509690117.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:57.908Z,1509690117.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:58.292Z,1509690118.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:58.311Z,1509690118.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:58.679Z,1509690118.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:58.719Z,1509690118.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:59.111Z,1509690119.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:59.165Z,1509690119.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:59.507Z,1509690119.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:59.527Z,1509690119.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:21:59.909Z,1509690119.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:21:59.924Z,1509690119.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:00.298Z,1509690120.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:00.313Z,1509690120.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:00.693Z,1509690120.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:00.712Z,1509690120.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:01.095Z,1509690121.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:01.111Z,1509690121.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:01.504Z,1509690121.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:01.520Z,1509690121.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:01.892Z,1509690121.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:01.910Z,1509690121.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:02.284Z,1509690122.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:02.311Z,1509690122.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:02.705Z,1509690122.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:02.721Z,1509690122.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:03.105Z,1509690123.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:03.120Z,1509690123.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:03.502Z,1509690123.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:03.517Z,1509690123.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:03.893Z,1509690123.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:03.909Z,1509690123.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:04.292Z,1509690124.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:04.310Z,1509690124.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:04.695Z,1509690124.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:04.764Z,1509690124.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:05.083Z,1509690125.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:05.103Z,1509690125.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:05.501Z,1509690125.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:05.573Z,1509690125.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:05.912Z,1509690125.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:05.927Z,1509690125.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:06.298Z,1509690126.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:06.351Z,1509690126.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:06.683Z,1509690126.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:06.699Z,1509690126.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:07.091Z,1509690127.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:07.146Z,1509690127.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:07.483Z,1509690127.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:07.499Z,1509690127.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:07.891Z,1509690127.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:07.925Z,1509690127.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:08.283Z,1509690128.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:08.298Z,1509690128.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:08.698Z,1509690128.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:08.727Z,1509690128.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:09.101Z,1509690129.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:09.123Z,1509690129.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:09.497Z,1509690129.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:09.522Z,1509690129.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:09.883Z,1509690129.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:09.898Z,1509690129.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:10.290Z,1509690130.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:10.323Z,1509690130.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:10.691Z,1509690130.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:10.726Z,1509690130.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:11.088Z,1509690131.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:11.103Z,1509690131.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:11.501Z,1509690131.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:11.531Z,1509690131.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:11.899Z,1509690131.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:11.922Z,1509690131.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:12.302Z,1509690132.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:12.325Z,1509690132.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:12.690Z,1509690132.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:12.723Z,1509690132.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:13.116Z,1509690133.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:13.149Z,1509690133.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:13.487Z,1509690133.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:13.503Z,1509690133.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:13.891Z,1509690133.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:13.923Z,1509690133.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:14.284Z,1509690134.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:14.298Z,1509690134.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:14.698Z,1509690134.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:14.721Z,1509690134.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:15.098Z,1509690135.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:15.121Z,1509690135.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:15.493Z,1509690135.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:15.520Z,1509690135.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:15.891Z,1509690135.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:15.923Z,1509690135.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:16.286Z,1509690136.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:16.323Z,1509690136.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:16.685Z,1509690136.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:16.699Z,1509690136.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:17.085Z,1509690137.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:17.101Z,1509690137.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:17.511Z,1509690137.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:17.534Z,1509690137.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:17.897Z,1509690137.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:17.926Z,1509690137.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:18.298Z,1509690138.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:18.327Z,1509690138.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:18.691Z,1509690138.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:18.743Z,1509690138.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:19.091Z,1509690139.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:19.123Z,1509690139.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:19.492Z,1509690139.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:19.508Z,1509690139.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:19.892Z,1509690139.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:19.909Z,1509690139.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:20.294Z,1509690140.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:20.310Z,1509690140.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:20.699Z,1509690140.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:20.754Z,1509690140.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:21.117Z,1509690141.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:21.132Z,1509690141.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:21.506Z,1509690141.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:21.547Z,1509690141.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:21.884Z,1509690141.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:21.934Z,1509690141.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:22.284Z,1509690142.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:22.315Z,1509690142.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:22.681Z,1509690142.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:22.695Z,1509690142.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:23.083Z,1509690143.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:23.119Z,1509690143.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:23.501Z,1509690143.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:23.535Z,1509690143.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:23.897Z,1509690143.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:23.930Z,1509690143.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:24.297Z,1509690144.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:24.323Z,1509690144.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:24.684Z,1509690144.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:24.699Z,1509690144.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:25.088Z,1509690145.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:25.122Z,1509690145.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:25.487Z,1509690145.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:25.523Z,1509690145.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:25.884Z,1509690145.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:25.899Z,1509690145.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:26.283Z,1509690146.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:26.298Z,1509690146.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:26.697Z,1509690146.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:26.728Z,1509690146.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:27.129Z,1509690147.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:27.149Z,1509690147.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:27.496Z,1509690147.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:27.511Z,1509690147.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:27.892Z,1509690147.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:27.907Z,1509690147.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:28.290Z,1509690148.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:28.311Z,1509690148.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:28.691Z,1509690148.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:28.710Z,1509690148.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:29.092Z,1509690149.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:29.107Z,1509690149.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:29.495Z,1509690149.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:29.515Z,1509690149.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:29.901Z,1509690149.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:29.916Z,1509690149.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:30.298Z,1509690150.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:30.313Z,1509690150.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:30.695Z,1509690150.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:30.715Z,1509690150.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:31.089Z,1509690151.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:31.104Z,1509690151.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:31.490Z,1509690151.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:31.554Z,1509690151.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:31.893Z,1509690151.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:31.908Z,1509690151.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:32.294Z,1509690152.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:32.309Z,1509690152.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:32.696Z,1509690152.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:32.719Z,1509690152.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:33.101Z,1509690153.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:33.117Z,1509690153.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:33.498Z,1509690153.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:33.513Z,1509690153.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:33.894Z,1509690153.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:33.978Z,1509690153.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:34.281Z,1509690154.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:34.307Z,1509690154.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:34.697Z,1509690154.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:34.712Z,1509690154.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:35.079Z,1509690155.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:35.140Z,1509690155.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:35.505Z,1509690155.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:35.520Z,1509690155.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:35.909Z,1509690155.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:35.949Z,1509690155.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:36.305Z,1509690156.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:36.355Z,1509690156.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:36.694Z,1509690156.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:36.709Z,1509690156.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:37.083Z,1509690157.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:37.110Z,1509690157.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:37.494Z,1509690157.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:37.511Z,1509690157.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:37.893Z,1509690157.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:37.909Z,1509690157.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:38.295Z,1509690158.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:38.309Z,1509690158.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:38.705Z,1509690158.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:38.719Z,1509690158.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:39.107Z,1509690159.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:39.127Z,1509690159.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:39.506Z,1509690159.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:39.521Z,1509690159.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:39.895Z,1509690159.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:39.915Z,1509690159.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:40.283Z,1509690160.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:40.319Z,1509690160.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:40.685Z,1509690160.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:40.711Z,1509690160.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:41.109Z,1509690161.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:41.133Z,1509690161.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:41.506Z,1509690161.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:41.524Z,1509690161.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:41.906Z,1509690161.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:41.926Z,1509690161.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:42.293Z,1509690162.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:42.319Z,1509690162.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:42.684Z,1509690162.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:42.716Z,1509690162.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:43.084Z,1509690163.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:43.099Z,1509690163.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:43.488Z,1509690163.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:43.503Z,1509690163.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:43.885Z,1509690163.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:43.900Z,1509690163.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:44.284Z,1509690164.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:44.327Z,1509690164.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:44.697Z,1509690164.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:44.729Z,1509690164.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:45.097Z,1509690165.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:45.129Z,1509690165.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:45.502Z,1509690165.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:45.524Z,1509690165.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:45.888Z,1509690165.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:45.903Z,1509690165.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:46.291Z,1509690166.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:46.330Z,1509690166.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:46.684Z,1509690166.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:46.699Z,1509690166.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:47.087Z,1509690167.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:47.103Z,1509690167.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:47.497Z,1509690167.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:47.529Z,1509690167.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:47.897Z,1509690167.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:47.929Z,1509690167.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:48.298Z,1509690168.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:48.394Z,1509690168.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:48.692Z,1509690168.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:48.707Z,1509690168.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:51.934Z,1509690171.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:51.982Z,1509690171.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:52.112Z,1509690172.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:52.145Z,1509690172.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:52.534Z,1509690172.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:52.587Z,1509690172.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:52.949Z,1509690172.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:53.007Z,1509690173.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:53.335Z,1509690173.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:53.350Z,1509690173.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:53.712Z,1509690173.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:53.740Z,1509690173.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:54.115Z,1509690174.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:54.145Z,1509690174.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:54.515Z,1509690174.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:54.542Z,1509690174.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:54.914Z,1509690174.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:54.949Z,1509690174.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:55.311Z,1509690175.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:55.338Z,1509690175.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:55.736Z,1509690175.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:55.751Z,1509690175.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:56.138Z,1509690176.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:56.153Z,1509690176.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:56.534Z,1509690176.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:56.553Z,1509690176.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:56.915Z,1509690176.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:56.947Z,1509690176.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:57.312Z,1509690177.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:57.395Z,1509690177.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:57.712Z,1509690177.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:57.727Z,1509690177.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:58.119Z,1509690178.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:58.155Z,1509690178.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:58.530Z,1509690178.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:58.555Z,1509690178.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:58.925Z,1509690178.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:58.950Z,1509690178.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:59.348Z,1509690179.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:59.403Z,1509690179.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:22:59.711Z,1509690179.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:22:59.727Z,1509690179.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:00.112Z,1509690180.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:00.128Z,1509690180.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:00.128Z,1509690180.128 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 123
2017-11-03T06:23:00.129Z,1509690180.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:23:00.130Z,1509690180.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:00.131Z,1509690180.131 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 123
2017-11-03T06:23:00.131Z,1509690180.131 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:23:00.149Z,1509690180.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:00.149Z,1509690180.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 123
2017-11-03T06:23:00.149Z,1509690180.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:23:00.229Z,1509690180.229 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:23:00.229Z,1509690180.229 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:23:00.229Z,1509690180.229 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:23:00.512Z,1509690180.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:00.616Z,1509690180.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:23:00.616Z,1509690180.616 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 123
2017-11-03T06:23:00.617Z,1509690180.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:23:00.617Z,1509690180.617 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 123
2017-11-03T06:23:00.617Z,1509690180.617 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:23:00.617Z,1509690180.617 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 123
2017-11-03T06:23:00.932Z,1509690180.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:00.955Z,1509690180.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:23:00.956Z,1509690180.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:23:00.956Z,1509690180.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:23:00.956Z,1509690180.956 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:23:00.957Z,1509690180.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:23:00.957Z,1509690180.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:23:00.958Z,1509690180.958 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:23:00.958Z,1509690180.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:23:00.958Z,1509690180.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:23:01.322Z,1509690181.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:01.337Z,1509690181.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:01.731Z,1509690181.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:01.758Z,1509690181.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:02.131Z,1509690182.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:02.160Z,1509690182.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:02.530Z,1509690182.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:02.561Z,1509690182.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:02.923Z,1509690182.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:02.958Z,1509690182.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:03.316Z,1509690183.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:03.335Z,1509690183.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:03.717Z,1509690183.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:03.732Z,1509690183.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:04.117Z,1509690184.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:04.132Z,1509690184.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:04.530Z,1509690184.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:04.566Z,1509690184.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:04.952Z,1509690184.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:05.023Z,1509690185.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:05.334Z,1509690185.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:05.362Z,1509690185.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:05.719Z,1509690185.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:05.767Z,1509690185.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:06.120Z,1509690186.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:06.135Z,1509690186.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:06.515Z,1509690186.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:06.567Z,1509690186.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:06.941Z,1509690186.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:07.007Z,1509690187.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:07.320Z,1509690187.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:07.336Z,1509690187.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:07.734Z,1509690187.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:07.762Z,1509690187.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:08.127Z,1509690188.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:08.170Z,1509690188.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:08.526Z,1509690188.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:08.541Z,1509690188.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:08.923Z,1509690188.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:08.938Z,1509690188.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:09.318Z,1509690189.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:09.333Z,1509690189.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:09.719Z,1509690189.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:09.743Z,1509690189.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:10.122Z,1509690190.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:10.138Z,1509690190.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:10.526Z,1509690190.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:10.547Z,1509690190.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:10.926Z,1509690190.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:10.947Z,1509690190.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:11.332Z,1509690191.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:11.394Z,1509690191.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:11.720Z,1509690191.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:11.735Z,1509690191.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:12.121Z,1509690192.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:12.136Z,1509690192.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:12.522Z,1509690192.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:12.538Z,1509690192.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:12.921Z,1509690192.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:12.936Z,1509690192.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:13.364Z,1509690193.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:13.428Z,1509690193.428 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:23:13.428Z,1509690193.428 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T06:23:13.428Z,1509690193.428 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:23:13.435Z,1509690193.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T06:23:13.436Z,1509690193.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:13.529Z,1509690193.529 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:23:13.726Z,1509690193.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:13.741Z,1509690193.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:23:13.742Z,1509690193.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:13.833Z,1509690193.833 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:23:13.942Z,1509690193.942 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:23:14.138Z,1509690194.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:14.171Z,1509690194.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:23:14.172Z,1509690194.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:14.526Z,1509690194.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:14.546Z,1509690194.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:23:14.547Z,1509690194.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:14.916Z,1509690194.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:14.931Z,1509690194.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:23:14.933Z,1509690194.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:15.321Z,1509690195.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:15.336Z,1509690195.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:23:15.337Z,1509690195.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:15.425Z,1509690195.425 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:23:15.425Z,1509690195.425 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T06:23:15.557Z,1509690195.557 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:23:15.557Z,1509690195.557 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:23:15.557Z,1509690195.557 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:23:15.557Z,1509690195.557 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:23:15.724Z,1509690195.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:15.739Z,1509690195.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:23:15.740Z,1509690195.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:16.121Z,1509690196.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:16.136Z,1509690196.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:23:16.137Z,1509690196.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:16.526Z,1509690196.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:16.541Z,1509690196.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:23:16.542Z,1509690196.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:16.926Z,1509690196.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:16.940Z,1509690196.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:23:16.941Z,1509690196.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:17.327Z,1509690197.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:17.342Z,1509690197.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:23:17.343Z,1509690197.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:17.722Z,1509690197.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:17.737Z,1509690197.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:23:17.738Z,1509690197.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:18.121Z,1509690198.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:18.136Z,1509690198.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:23:18.137Z,1509690198.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:18.523Z,1509690198.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:18.582Z,1509690198.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:23:18.583Z,1509690198.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:18.922Z,1509690198.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:18.937Z,1509690198.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:23:18.938Z,1509690198.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:19.324Z,1509690199.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:19.387Z,1509690199.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T06:23:19.388Z,1509690199.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:19.679Z,1509690199.679 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:23:19.753Z,1509690199.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:19.788Z,1509690199.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T06:23:19.793Z,1509690199.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:19.827Z,1509690199.827 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:23:19.828Z,1509690199.828 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:23:19.829Z,1509690199.829 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:23:19.830Z,1509690199.830 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:23:20.135Z,1509690200.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:20.151Z,1509690200.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:23:20.152Z,1509690200.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:20.535Z,1509690200.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:20.587Z,1509690200.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:20.908Z,1509690200.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:20.935Z,1509690200.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:21.322Z,1509690201.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:21.378Z,1509690201.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:21.725Z,1509690201.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:21.779Z,1509690201.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:22.122Z,1509690202.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:22.138Z,1509690202.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:22.533Z,1509690202.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:22.549Z,1509690202.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:22.935Z,1509690202.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:22.955Z,1509690202.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:23.333Z,1509690203.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:23.348Z,1509690203.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:23.722Z,1509690203.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:23.738Z,1509690203.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:24.110Z,1509690204.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:24.141Z,1509690204.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:24.515Z,1509690204.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:24.541Z,1509690204.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:24.915Z,1509690204.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:24.942Z,1509690204.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:25.312Z,1509690205.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:25.338Z,1509690205.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:25.734Z,1509690205.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:25.749Z,1509690205.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:26.134Z,1509690206.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:26.149Z,1509690206.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:26.539Z,1509690206.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:26.559Z,1509690206.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:26.919Z,1509690206.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:26.951Z,1509690206.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:27.312Z,1509690207.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:27.341Z,1509690207.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:27.713Z,1509690207.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:27.747Z,1509690207.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:28.115Z,1509690208.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:28.147Z,1509690208.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:28.534Z,1509690208.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:28.549Z,1509690208.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:28.933Z,1509690208.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:28.954Z,1509690208.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:29.334Z,1509690209.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:29.350Z,1509690209.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:29.712Z,1509690209.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:29.743Z,1509690209.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:30.112Z,1509690210.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:30.127Z,1509690210.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:30.514Z,1509690210.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:30.541Z,1509690210.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:30.928Z,1509690210.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:30.959Z,1509690210.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:31.318Z,1509690211.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:31.346Z,1509690211.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:31.730Z,1509690211.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:31.757Z,1509690211.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:32.126Z,1509690212.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:32.152Z,1509690212.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:32.525Z,1509690212.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:32.558Z,1509690212.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:32.911Z,1509690212.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:32.920Z,1509690212.920 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:23:32.921Z,1509690212.921 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:23:32.921Z,1509690212.921 [BPC1](ERROR): Data Fault
2017-11-03T06:23:32.929Z,1509690212.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:33.042Z,1509690213.042 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:23:33.320Z,1509690213.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:33.356Z,1509690213.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:33.713Z,1509690213.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:33.735Z,1509690213.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:34.112Z,1509690214.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:34.128Z,1509690214.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:34.229Z,1509690214.229 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:23:34.229Z,1509690214.229 [BPC1] No Fault, FailCount= 1
2017-11-03T06:23:34.527Z,1509690214.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:34.607Z,1509690214.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:34.930Z,1509690214.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:34.958Z,1509690214.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:35.330Z,1509690215.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:35.363Z,1509690215.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:35.712Z,1509690215.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:35.781Z,1509690215.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:36.111Z,1509690216.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:36.127Z,1509690216.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:36.512Z,1509690216.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:36.527Z,1509690216.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:36.932Z,1509690216.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:36.956Z,1509690216.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:37.312Z,1509690217.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:37.328Z,1509690217.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:37.726Z,1509690217.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:37.756Z,1509690217.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:38.126Z,1509690218.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:38.157Z,1509690218.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:38.525Z,1509690218.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:38.557Z,1509690218.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:38.911Z,1509690218.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:38.927Z,1509690218.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:39.316Z,1509690219.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:39.331Z,1509690219.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:39.711Z,1509690219.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:39.726Z,1509690219.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:40.111Z,1509690220.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:40.135Z,1509690220.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:40.526Z,1509690220.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:40.557Z,1509690220.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:40.930Z,1509690220.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:40.955Z,1509690220.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:41.362Z,1509690221.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:41.402Z,1509690221.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:41.711Z,1509690221.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:41.727Z,1509690221.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:42.111Z,1509690222.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:42.127Z,1509690222.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:42.511Z,1509690222.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:42.527Z,1509690222.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:42.913Z,1509690222.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:42.959Z,1509690222.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:43.316Z,1509690223.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:43.390Z,1509690223.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:43.726Z,1509690223.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:43.742Z,1509690223.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:44.126Z,1509690224.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:44.141Z,1509690224.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:44.525Z,1509690224.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:44.539Z,1509690224.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:44.919Z,1509690224.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:44.934Z,1509690224.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:45.320Z,1509690225.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:45.335Z,1509690225.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:45.722Z,1509690225.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:45.743Z,1509690225.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:46.119Z,1509690226.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:46.139Z,1509690226.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:46.526Z,1509690226.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:46.547Z,1509690226.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:46.926Z,1509690226.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:46.934Z,1509690226.934 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:23:46.934Z,1509690226.934 [BPC1] Data Fault, FailCount= 2
2017-11-03T06:23:46.934Z,1509690226.934 [BPC1](ERROR): Data Fault
2017-11-03T06:23:46.943Z,1509690226.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:47.041Z,1509690227.041 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:23:47.328Z,1509690227.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:47.344Z,1509690227.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:47.720Z,1509690227.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:47.735Z,1509690227.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:48.115Z,1509690228.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:48.131Z,1509690228.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:48.216Z,1509690228.216 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:23:48.216Z,1509690228.216 [BPC1] No Fault, FailCount= 2
2017-11-03T06:23:48.523Z,1509690228.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:48.591Z,1509690228.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:48.925Z,1509690228.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:48.940Z,1509690228.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:52.099Z,1509690232.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:52.148Z,1509690232.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:52.298Z,1509690232.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:52.331Z,1509690232.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:52.697Z,1509690232.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:52.723Z,1509690232.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:53.135Z,1509690233.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:53.154Z,1509690233.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:53.481Z,1509690233.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:53.496Z,1509690233.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:53.887Z,1509690233.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:53.903Z,1509690233.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:54.280Z,1509690234.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:54.294Z,1509690234.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:54.693Z,1509690234.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:54.725Z,1509690234.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:55.093Z,1509690235.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:55.127Z,1509690235.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:55.501Z,1509690235.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:55.527Z,1509690235.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:55.887Z,1509690235.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:55.907Z,1509690235.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:56.279Z,1509690236.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:56.295Z,1509690236.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:56.687Z,1509690236.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:56.703Z,1509690236.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:57.079Z,1509690237.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:57.095Z,1509690237.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:57.502Z,1509690237.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:57.525Z,1509690237.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:57.893Z,1509690237.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:57.928Z,1509690237.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:58.297Z,1509690238.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:58.328Z,1509690238.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:58.686Z,1509690238.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:58.707Z,1509690238.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:59.091Z,1509690239.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:59.130Z,1509690239.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:59.487Z,1509690239.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:59.507Z,1509690239.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:23:59.887Z,1509690239.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:23:59.902Z,1509690239.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:00.279Z,1509690240.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:00.294Z,1509690240.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:00.693Z,1509690240.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:00.725Z,1509690240.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:01.105Z,1509690241.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:01.130Z,1509690241.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:01.497Z,1509690241.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:01.529Z,1509690241.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:01.884Z,1509690241.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:01.899Z,1509690241.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:02.288Z,1509690242.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:02.303Z,1509690242.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:02.688Z,1509690242.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:02.703Z,1509690242.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:03.086Z,1509690243.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:03.101Z,1509690243.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:03.494Z,1509690243.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:03.509Z,1509690243.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:03.901Z,1509690243.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:03.943Z,1509690243.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:04.294Z,1509690244.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:04.358Z,1509690244.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:04.685Z,1509690244.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:04.706Z,1509690244.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:05.085Z,1509690245.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:05.106Z,1509690245.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:05.490Z,1509690245.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:05.547Z,1509690245.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:05.888Z,1509690245.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:05.903Z,1509690245.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:06.288Z,1509690246.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:06.335Z,1509690246.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:06.700Z,1509690246.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:06.747Z,1509690246.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:07.108Z,1509690247.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:07.159Z,1509690247.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:07.501Z,1509690247.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:07.516Z,1509690247.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:07.890Z,1509690247.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:07.905Z,1509690247.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:08.288Z,1509690248.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:08.303Z,1509690248.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:08.689Z,1509690248.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:08.705Z,1509690248.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:09.090Z,1509690249.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:09.105Z,1509690249.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:09.497Z,1509690249.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:09.512Z,1509690249.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:09.900Z,1509690249.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:09.923Z,1509690249.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:10.300Z,1509690250.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:10.315Z,1509690250.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:10.688Z,1509690250.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:10.703Z,1509690250.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:11.091Z,1509690251.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:11.106Z,1509690251.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:11.494Z,1509690251.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:11.515Z,1509690251.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:11.890Z,1509690251.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:11.905Z,1509690251.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:12.290Z,1509690252.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:12.305Z,1509690252.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:12.701Z,1509690252.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:12.716Z,1509690252.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:13.100Z,1509690253.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:13.122Z,1509690253.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:13.502Z,1509690253.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:13.523Z,1509690253.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:13.891Z,1509690253.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:13.906Z,1509690253.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:14.287Z,1509690254.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:14.304Z,1509690254.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:14.691Z,1509690254.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:14.711Z,1509690254.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:15.086Z,1509690255.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:15.102Z,1509690255.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:15.500Z,1509690255.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:15.516Z,1509690255.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:15.900Z,1509690255.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:15.916Z,1509690255.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:16.300Z,1509690256.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:16.323Z,1509690256.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:16.687Z,1509690256.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:16.703Z,1509690256.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:17.087Z,1509690257.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:17.102Z,1509690257.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:17.490Z,1509690257.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:17.505Z,1509690257.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:17.889Z,1509690257.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:17.904Z,1509690257.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:18.291Z,1509690258.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:18.306Z,1509690258.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:18.700Z,1509690258.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:18.771Z,1509690258.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:19.105Z,1509690259.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:19.120Z,1509690259.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:19.501Z,1509690259.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:19.551Z,1509690259.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:19.885Z,1509690259.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:19.900Z,1509690259.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:20.290Z,1509690260.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:20.343Z,1509690260.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:20.688Z,1509690260.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:20.703Z,1509690260.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:21.107Z,1509690261.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:21.156Z,1509690261.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:21.500Z,1509690261.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:21.515Z,1509690261.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:21.900Z,1509690261.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:21.915Z,1509690261.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:22.299Z,1509690262.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:22.319Z,1509690262.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:22.690Z,1509690262.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:22.711Z,1509690262.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:23.088Z,1509690263.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:23.103Z,1509690263.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:23.485Z,1509690263.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:23.505Z,1509690263.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:23.889Z,1509690263.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:23.903Z,1509690263.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:24.288Z,1509690264.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:24.303Z,1509690264.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:24.697Z,1509690264.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:24.719Z,1509690264.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:25.101Z,1509690265.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:25.116Z,1509690265.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:25.502Z,1509690265.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:25.517Z,1509690265.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:25.890Z,1509690265.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:25.911Z,1509690265.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:26.289Z,1509690266.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:26.304Z,1509690266.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:26.693Z,1509690266.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:26.708Z,1509690266.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:27.087Z,1509690267.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:27.102Z,1509690267.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:27.497Z,1509690267.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:27.522Z,1509690267.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:27.894Z,1509690267.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:27.925Z,1509690267.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:28.290Z,1509690268.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:28.317Z,1509690268.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:28.685Z,1509690268.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:28.701Z,1509690268.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:29.091Z,1509690269.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:29.123Z,1509690269.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:29.487Z,1509690269.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:29.503Z,1509690269.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:29.884Z,1509690269.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:29.900Z,1509690269.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:30.287Z,1509690270.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:30.302Z,1509690270.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:30.694Z,1509690270.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:30.728Z,1509690270.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:31.097Z,1509690271.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:31.129Z,1509690271.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:31.497Z,1509690271.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:31.529Z,1509690271.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:31.884Z,1509690271.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:31.899Z,1509690271.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:32.284Z,1509690272.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:32.299Z,1509690272.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:32.688Z,1509690272.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:32.736Z,1509690272.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:33.088Z,1509690273.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:33.150Z,1509690273.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:33.494Z,1509690273.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:33.515Z,1509690273.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:33.889Z,1509690273.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:33.933Z,1509690273.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:34.287Z,1509690274.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:34.311Z,1509690274.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:34.687Z,1509690274.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:34.747Z,1509690274.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:35.133Z,1509690275.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:35.190Z,1509690275.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:35.488Z,1509690275.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:35.503Z,1509690275.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:35.887Z,1509690275.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:35.903Z,1509690275.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:36.287Z,1509690276.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:36.303Z,1509690276.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:36.694Z,1509690276.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:36.709Z,1509690276.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:37.093Z,1509690277.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:37.115Z,1509690277.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:37.488Z,1509690277.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:37.506Z,1509690277.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:37.888Z,1509690277.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:37.903Z,1509690277.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:38.287Z,1509690278.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:38.302Z,1509690278.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:38.685Z,1509690278.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:38.700Z,1509690278.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:39.087Z,1509690279.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:39.103Z,1509690279.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:39.490Z,1509690279.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:39.505Z,1509690279.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:39.901Z,1509690279.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:39.915Z,1509690279.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:40.290Z,1509690280.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:40.305Z,1509690280.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:40.687Z,1509690280.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:40.702Z,1509690280.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:41.082Z,1509690281.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:41.102Z,1509690281.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:41.488Z,1509690281.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:41.503Z,1509690281.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:41.888Z,1509690281.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:41.904Z,1509690281.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:42.289Z,1509690282.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:42.304Z,1509690282.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:42.694Z,1509690282.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:42.709Z,1509690282.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:43.098Z,1509690283.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:43.113Z,1509690283.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:43.493Z,1509690283.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:43.508Z,1509690283.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:43.887Z,1509690283.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:43.907Z,1509690283.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:44.283Z,1509690284.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:44.298Z,1509690284.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:44.690Z,1509690284.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:44.705Z,1509690284.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:45.096Z,1509690285.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:45.111Z,1509690285.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:45.494Z,1509690285.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:45.509Z,1509690285.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:45.897Z,1509690285.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:45.912Z,1509690285.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:46.294Z,1509690286.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:46.302Z,1509690286.302 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T06:24:46.302Z,1509690286.302 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:24:46.302Z,1509690286.302 [BPC1](ERROR): Data Fault
2017-11-03T06:24:46.310Z,1509690286.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:46.413Z,1509690286.413 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:24:46.690Z,1509690286.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:46.705Z,1509690286.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:47.083Z,1509690287.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:47.102Z,1509690287.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:47.488Z,1509690287.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:47.503Z,1509690287.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:47.581Z,1509690287.581 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:24:47.581Z,1509690287.581 [BPC1] No Fault, FailCount= 1
2017-11-03T06:24:47.890Z,1509690287.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:47.967Z,1509690287.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:48.285Z,1509690288.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:48.299Z,1509690288.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:48.694Z,1509690288.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:48.709Z,1509690288.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:49.134Z,1509690289.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:49.187Z,1509690289.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:52.323Z,1509690292.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:52.338Z,1509690292.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:52.484Z,1509690292.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:52.499Z,1509690292.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:52.877Z,1509690292.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:52.899Z,1509690292.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:53.282Z,1509690293.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:53.297Z,1509690293.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:53.670Z,1509690293.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:53.702Z,1509690293.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:54.070Z,1509690294.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:54.101Z,1509690294.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:54.477Z,1509690294.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:54.504Z,1509690294.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:54.886Z,1509690294.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:54.923Z,1509690294.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:55.281Z,1509690295.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:55.315Z,1509690295.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:55.670Z,1509690295.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:55.684Z,1509690295.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:56.071Z,1509690296.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:56.107Z,1509690296.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:56.472Z,1509690296.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:56.487Z,1509690296.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:56.887Z,1509690296.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:56.914Z,1509690296.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:57.276Z,1509690297.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:57.291Z,1509690297.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:57.689Z,1509690297.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:57.725Z,1509690297.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:58.089Z,1509690298.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:58.104Z,1509690298.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:58.482Z,1509690298.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:58.503Z,1509690298.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:58.892Z,1509690298.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:58.927Z,1509690298.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:59.276Z,1509690299.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:59.291Z,1509690299.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:24:59.678Z,1509690299.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:24:59.694Z,1509690299.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:00.080Z,1509690300.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:00.095Z,1509690300.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:00.481Z,1509690300.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:00.496Z,1509690300.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:00.920Z,1509690300.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:00.983Z,1509690300.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:01.288Z,1509690301.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:01.346Z,1509690301.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:01.679Z,1509690301.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:01.694Z,1509690301.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:02.077Z,1509690302.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:02.092Z,1509690302.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:02.478Z,1509690302.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:02.538Z,1509690302.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:02.870Z,1509690302.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:02.897Z,1509690302.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:03.279Z,1509690303.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:03.347Z,1509690303.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:03.681Z,1509690303.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:03.745Z,1509690303.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:04.077Z,1509690304.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:04.105Z,1509690304.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:04.483Z,1509690304.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:04.509Z,1509690304.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:04.871Z,1509690304.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:04.905Z,1509690304.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:05.270Z,1509690305.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:05.308Z,1509690305.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:05.666Z,1509690305.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:05.681Z,1509690305.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:06.065Z,1509690306.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:06.103Z,1509690306.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:06.488Z,1509690306.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:06.503Z,1509690306.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:06.890Z,1509690306.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:06.911Z,1509690306.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:07.277Z,1509690307.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:07.303Z,1509690307.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:07.675Z,1509690307.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:07.713Z,1509690307.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:08.071Z,1509690308.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:08.091Z,1509690308.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:08.475Z,1509690308.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:08.490Z,1509690308.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:08.879Z,1509690308.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:08.921Z,1509690308.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:09.273Z,1509690309.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:09.288Z,1509690309.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:09.689Z,1509690309.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:09.719Z,1509690309.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:10.086Z,1509690310.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:10.111Z,1509690310.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:10.486Z,1509690310.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:10.511Z,1509690310.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:10.887Z,1509690310.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:10.918Z,1509690310.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:11.271Z,1509690311.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:11.287Z,1509690311.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:11.671Z,1509690311.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:11.691Z,1509690311.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:12.069Z,1509690312.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:12.084Z,1509690312.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:12.483Z,1509690312.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:12.514Z,1509690312.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:12.918Z,1509690312.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:12.933Z,1509690312.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:13.286Z,1509690313.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:13.310Z,1509690313.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:13.672Z,1509690313.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:13.687Z,1509690313.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:14.078Z,1509690314.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:14.113Z,1509690314.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:14.475Z,1509690314.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:14.490Z,1509690314.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:14.914Z,1509690314.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:14.966Z,1509690314.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:15.276Z,1509690315.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:15.291Z,1509690315.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:15.687Z,1509690315.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:15.744Z,1509690315.744 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:25:15.744Z,1509690315.744 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T06:25:15.744Z,1509690315.744 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:25:15.758Z,1509690315.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T06:25:15.758Z,1509690315.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:15.861Z,1509690315.861 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:25:16.092Z,1509690316.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:16.114Z,1509690316.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:25:16.115Z,1509690316.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:16.150Z,1509690316.150 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:25:16.266Z,1509690316.266 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:25:16.497Z,1509690316.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:16.513Z,1509690316.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:25:16.514Z,1509690316.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:16.868Z,1509690316.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:16.933Z,1509690316.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:25:16.934Z,1509690316.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:17.282Z,1509690317.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:17.297Z,1509690317.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:25:17.298Z,1509690317.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:17.672Z,1509690317.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:17.732Z,1509690317.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:25:17.733Z,1509690317.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:17.837Z,1509690317.837 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:25:17.837Z,1509690317.837 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T06:25:17.885Z,1509690317.885 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:25:17.885Z,1509690317.885 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:25:17.885Z,1509690317.885 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:25:17.885Z,1509690317.885 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:25:18.067Z,1509690318.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:18.135Z,1509690318.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:25:18.136Z,1509690318.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:18.451Z,1509690318.451 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T06:25:18.451Z,1509690318.451 [NAL9602] Data Fault, FailCount= 4
2017-11-03T06:25:18.451Z,1509690318.451 [NAL9602](ERROR): Data Fault
2017-11-03T06:25:18.469Z,1509690318.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:18.504Z,1509690318.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:25:18.505Z,1509690318.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:18.597Z,1509690318.597 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T06:25:18.851Z,1509690318.851 [NAL9602](INFO): Powering down
2017-11-03T06:25:18.872Z,1509690318.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:18.902Z,1509690318.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:25:18.903Z,1509690318.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:19.282Z,1509690319.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:19.297Z,1509690319.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:25:19.298Z,1509690319.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:19.669Z,1509690319.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:19.693Z,1509690319.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:25:19.694Z,1509690319.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:19.780Z,1509690319.780 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T06:25:19.780Z,1509690319.780 [NAL9602] No Fault, FailCount= 4
2017-11-03T06:25:20.068Z,1509690320.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:20.093Z,1509690320.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:25:20.094Z,1509690320.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:20.470Z,1509690320.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:20.506Z,1509690320.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:25:20.507Z,1509690320.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:20.865Z,1509690320.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:20.893Z,1509690320.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:25:20.894Z,1509690320.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:21.270Z,1509690321.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:21.298Z,1509690321.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:25:21.299Z,1509690321.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:21.668Z,1509690321.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:21.693Z,1509690321.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:25:21.694Z,1509690321.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:22.002Z,1509690322.002 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:25:22.087Z,1509690322.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:22.120Z,1509690322.120 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:25:22.121Z,1509690322.121 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:25:22.121Z,1509690322.121 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:25:22.122Z,1509690322.122 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:25:22.168Z,1509690322.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T06:25:22.169Z,1509690322.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:22.480Z,1509690322.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:22.496Z,1509690322.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:25:22.505Z,1509690322.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:22.874Z,1509690322.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:22.889Z,1509690322.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:23.272Z,1509690323.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:23.286Z,1509690323.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:23.678Z,1509690323.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:23.693Z,1509690323.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:24.082Z,1509690324.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:24.097Z,1509690324.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:24.478Z,1509690324.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:24.493Z,1509690324.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:24.876Z,1509690324.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:24.899Z,1509690324.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:25.278Z,1509690325.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:25.294Z,1509690325.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:25.675Z,1509690325.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:25.707Z,1509690325.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:26.070Z,1509690326.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:26.102Z,1509690326.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:26.473Z,1509690326.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:26.501Z,1509690326.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:26.871Z,1509690326.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:26.906Z,1509690326.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:27.273Z,1509690327.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:27.309Z,1509690327.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:27.670Z,1509690327.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:27.685Z,1509690327.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:28.065Z,1509690328.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:28.079Z,1509690328.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:28.467Z,1509690328.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:28.484Z,1509690328.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:28.867Z,1509690328.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:28.887Z,1509690328.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:29.274Z,1509690329.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:29.311Z,1509690329.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:29.673Z,1509690329.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:29.688Z,1509690329.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:30.070Z,1509690330.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:30.086Z,1509690330.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:30.473Z,1509690330.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:30.562Z,1509690330.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:30.870Z,1509690330.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:30.886Z,1509690330.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:31.275Z,1509690331.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:31.323Z,1509690331.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:31.669Z,1509690331.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:31.685Z,1509690331.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:32.072Z,1509690332.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:32.134Z,1509690332.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:32.472Z,1509690332.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:32.523Z,1509690332.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:32.871Z,1509690332.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:32.891Z,1509690332.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:33.269Z,1509690333.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:33.285Z,1509690333.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:33.675Z,1509690333.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:33.690Z,1509690333.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:34.082Z,1509690334.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:34.120Z,1509690334.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:34.474Z,1509690334.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:34.489Z,1509690334.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:34.873Z,1509690334.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:34.888Z,1509690334.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:35.276Z,1509690335.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:35.290Z,1509690335.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:35.670Z,1509690335.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:35.685Z,1509690335.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:36.078Z,1509690336.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:36.126Z,1509690336.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:36.474Z,1509690336.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:36.494Z,1509690336.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:36.870Z,1509690336.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:36.885Z,1509690336.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:37.273Z,1509690337.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:37.288Z,1509690337.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:37.679Z,1509690337.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:37.693Z,1509690337.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:38.071Z,1509690338.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:38.086Z,1509690338.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:38.478Z,1509690338.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:38.493Z,1509690338.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:38.872Z,1509690338.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:38.887Z,1509690338.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:39.271Z,1509690339.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:39.286Z,1509690339.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:39.673Z,1509690339.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:39.689Z,1509690339.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:40.079Z,1509690340.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:40.094Z,1509690340.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:40.472Z,1509690340.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:40.487Z,1509690340.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:40.871Z,1509690340.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:40.891Z,1509690340.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:41.274Z,1509690341.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:41.294Z,1509690341.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:41.675Z,1509690341.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:41.695Z,1509690341.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:42.095Z,1509690342.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:42.143Z,1509690342.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:42.474Z,1509690342.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:42.494Z,1509690342.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:42.878Z,1509690342.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:42.899Z,1509690342.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:43.276Z,1509690343.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:43.295Z,1509690343.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:43.675Z,1509690343.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:43.690Z,1509690343.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:44.075Z,1509690344.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:44.090Z,1509690344.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:44.476Z,1509690344.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:44.558Z,1509690344.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:44.878Z,1509690344.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:44.893Z,1509690344.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:45.277Z,1509690345.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:45.292Z,1509690345.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:45.677Z,1509690345.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:45.730Z,1509690345.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:46.081Z,1509690346.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:46.102Z,1509690346.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:46.477Z,1509690346.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:46.523Z,1509690346.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:46.877Z,1509690346.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:46.892Z,1509690346.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:47.277Z,1509690347.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:47.321Z,1509690347.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:47.676Z,1509690347.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:47.691Z,1509690347.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:48.078Z,1509690348.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:48.093Z,1509690348.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:48.476Z,1509690348.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:48.491Z,1509690348.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:48.877Z,1509690348.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:48.892Z,1509690348.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:49.254Z,1509690349.254 [NAL9602](INFO): Powering up NAL9602
2017-11-03T06:25:49.286Z,1509690349.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:49.314Z,1509690349.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:52.566Z,1509690352.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:52.580Z,1509690352.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:52.703Z,1509690352.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:52.751Z,1509690352.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:53.115Z,1509690353.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:53.135Z,1509690353.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:53.502Z,1509690353.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:53.535Z,1509690353.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:53.942Z,1509690353.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:53.977Z,1509690353.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:54.304Z,1509690354.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:54.330Z,1509690354.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:54.703Z,1509690354.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:54.729Z,1509690354.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:55.106Z,1509690355.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:55.134Z,1509690355.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:55.504Z,1509690355.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:55.529Z,1509690355.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:55.906Z,1509690355.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:55.933Z,1509690355.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:56.302Z,1509690356.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:56.328Z,1509690356.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:56.704Z,1509690356.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:56.734Z,1509690356.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:57.106Z,1509690357.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:57.131Z,1509690357.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:57.506Z,1509690357.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:57.531Z,1509690357.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:57.904Z,1509690357.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:57.929Z,1509690357.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:58.306Z,1509690358.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:58.394Z,1509690358.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:58.706Z,1509690358.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:58.731Z,1509690358.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:59.102Z,1509690359.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:59.158Z,1509690359.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:59.504Z,1509690359.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:59.551Z,1509690359.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:25:59.913Z,1509690359.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:25:59.947Z,1509690359.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:00.286Z,1509690360.286 [NAL9602](INFO): NAL9602 initialized
2017-11-03T06:26:00.305Z,1509690360.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:00.394Z,1509690360.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:00.715Z,1509690360.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:00.759Z,1509690360.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:01.118Z,1509690361.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:01.133Z,1509690361.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:01.133Z,1509690361.133 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 124
2017-11-03T06:26:01.133Z,1509690361.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:26:01.135Z,1509690361.135 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:01.135Z,1509690361.135 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 124
2017-11-03T06:26:01.135Z,1509690361.135 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:26:01.137Z,1509690361.137 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:01.137Z,1509690361.137 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 124
2017-11-03T06:26:01.137Z,1509690361.137 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:26:01.273Z,1509690361.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:26:01.274Z,1509690361.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:26:01.274Z,1509690361.274 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:26:01.522Z,1509690361.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:01.657Z,1509690361.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:26:01.657Z,1509690361.657 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 124
2017-11-03T06:26:01.657Z,1509690361.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:26:01.657Z,1509690361.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 124
2017-11-03T06:26:01.658Z,1509690361.658 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:26:01.658Z,1509690361.658 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 124
2017-11-03T06:26:01.924Z,1509690361.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:01.981Z,1509690361.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:26:01.981Z,1509690361.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:26:01.982Z,1509690361.982 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:26:01.982Z,1509690361.982 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:26:01.982Z,1509690361.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:26:01.983Z,1509690361.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:26:01.983Z,1509690361.983 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:26:01.983Z,1509690361.983 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:26:01.984Z,1509690361.984 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:26:02.326Z,1509690362.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:02.370Z,1509690362.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:02.729Z,1509690362.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:02.776Z,1509690362.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:03.113Z,1509690363.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:03.137Z,1509690363.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:03.504Z,1509690363.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:03.538Z,1509690363.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:03.922Z,1509690363.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:03.951Z,1509690363.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:04.325Z,1509690364.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:04.340Z,1509690364.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:04.713Z,1509690364.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:04.774Z,1509690364.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:05.113Z,1509690365.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:05.145Z,1509690365.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:05.516Z,1509690365.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:05.593Z,1509690365.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:05.909Z,1509690365.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:05.955Z,1509690365.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:06.309Z,1509690366.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:06.345Z,1509690366.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:06.736Z,1509690366.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:06.815Z,1509690366.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:07.116Z,1509690367.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:07.153Z,1509690367.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:07.535Z,1509690367.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:07.559Z,1509690367.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:07.944Z,1509690367.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:08.006Z,1509690368.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:08.305Z,1509690368.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:08.351Z,1509690368.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:08.713Z,1509690368.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:08.753Z,1509690368.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:09.118Z,1509690369.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:09.153Z,1509690369.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:09.525Z,1509690369.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:09.558Z,1509690369.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:09.928Z,1509690369.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:09.956Z,1509690369.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:10.332Z,1509690370.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:10.358Z,1509690370.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:10.726Z,1509690370.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:10.754Z,1509690370.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:11.114Z,1509690371.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:11.157Z,1509690371.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:11.508Z,1509690371.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:11.528Z,1509690371.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:11.914Z,1509690371.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:11.954Z,1509690371.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:12.309Z,1509690372.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:12.410Z,1509690372.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:12.713Z,1509690372.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:12.758Z,1509690372.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:13.120Z,1509690373.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:13.160Z,1509690373.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:13.527Z,1509690373.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:13.563Z,1509690373.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:13.947Z,1509690373.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:13.970Z,1509690373.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:14.330Z,1509690374.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:14.471Z,1509690374.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:14.729Z,1509690374.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:14.753Z,1509690374.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:15.154Z,1509690375.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:15.193Z,1509690375.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:15.501Z,1509690375.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:15.515Z,1509690375.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:15.936Z,1509690375.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:15.951Z,1509690375.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:16.317Z,1509690376.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:16.344Z,1509690376.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:16.713Z,1509690376.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:16.745Z,1509690376.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:17.110Z,1509690377.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:17.119Z,1509690377.119 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:26:17.119Z,1509690377.119 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:26:17.119Z,1509690377.119 [BPC1](ERROR): Communications Fault
2017-11-03T06:26:17.127Z,1509690377.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:17.238Z,1509690377.238 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:26:17.503Z,1509690377.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:17.518Z,1509690377.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:17.919Z,1509690377.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:17.950Z,1509690377.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:18.308Z,1509690378.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:18.331Z,1509690378.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:18.429Z,1509690378.429 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:26:18.429Z,1509690378.429 [BPC1] No Fault, FailCount= 1
2017-11-03T06:26:18.709Z,1509690378.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:18.795Z,1509690378.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:19.122Z,1509690379.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:19.137Z,1509690379.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:19.517Z,1509690379.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:19.539Z,1509690379.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:19.918Z,1509690379.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:19.935Z,1509690379.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:20.313Z,1509690380.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:20.328Z,1509690380.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:20.710Z,1509690380.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:20.725Z,1509690380.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:21.114Z,1509690381.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:21.128Z,1509690381.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:21.512Z,1509690381.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:21.527Z,1509690381.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:21.952Z,1509690381.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:21.967Z,1509690381.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:22.326Z,1509690382.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:22.357Z,1509690382.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:22.717Z,1509690382.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:22.732Z,1509690382.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:23.113Z,1509690383.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:23.183Z,1509690383.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:23.513Z,1509690383.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:23.528Z,1509690383.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:23.917Z,1509690383.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:23.932Z,1509690383.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:24.312Z,1509690384.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:24.327Z,1509690384.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:24.713Z,1509690384.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:24.734Z,1509690384.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:25.119Z,1509690385.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:25.134Z,1509690385.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:25.518Z,1509690385.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:25.533Z,1509690385.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:25.919Z,1509690385.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:25.957Z,1509690385.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:26.331Z,1509690386.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:26.389Z,1509690386.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:26.714Z,1509690386.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:26.730Z,1509690386.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:27.121Z,1509690387.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:27.137Z,1509690387.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:27.509Z,1509690387.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:27.523Z,1509690387.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:27.920Z,1509690387.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:27.935Z,1509690387.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:28.332Z,1509690388.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:28.386Z,1509690388.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:28.720Z,1509690388.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:28.743Z,1509690388.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:29.112Z,1509690389.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:29.127Z,1509690389.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:29.509Z,1509690389.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:29.523Z,1509690389.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:29.911Z,1509690389.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:29.931Z,1509690389.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:30.316Z,1509690390.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:30.332Z,1509690390.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:30.713Z,1509690390.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:30.728Z,1509690390.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:31.162Z,1509690391.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:31.220Z,1509690391.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:31.520Z,1509690391.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:31.535Z,1509690391.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:31.921Z,1509690391.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:31.936Z,1509690391.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:32.314Z,1509690392.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:32.335Z,1509690392.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:32.712Z,1509690392.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:32.727Z,1509690392.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:33.109Z,1509690393.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:33.131Z,1509690393.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:33.514Z,1509690393.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:33.535Z,1509690393.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:33.922Z,1509690393.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:33.963Z,1509690393.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:34.325Z,1509690394.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:34.340Z,1509690394.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:34.717Z,1509690394.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:34.732Z,1509690394.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:35.113Z,1509690395.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:35.167Z,1509690395.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:35.514Z,1509690395.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:35.529Z,1509690395.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:35.935Z,1509690395.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:35.991Z,1509690395.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:36.315Z,1509690396.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:36.331Z,1509690396.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:36.715Z,1509690396.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:36.771Z,1509690396.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:37.121Z,1509690397.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:37.136Z,1509690397.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:37.524Z,1509690397.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:37.539Z,1509690397.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:37.922Z,1509690397.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:37.937Z,1509690397.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:38.309Z,1509690398.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:38.328Z,1509690398.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:38.711Z,1509690398.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:38.727Z,1509690398.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:39.115Z,1509690399.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:39.130Z,1509690399.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:39.499Z,1509690399.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:39.529Z,1509690399.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:39.924Z,1509690399.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:39.939Z,1509690399.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:40.370Z,1509690400.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:40.424Z,1509690400.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:40.714Z,1509690400.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:40.742Z,1509690400.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:41.110Z,1509690401.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:41.131Z,1509690401.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:41.506Z,1509690401.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:41.537Z,1509690401.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:41.914Z,1509690401.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:41.935Z,1509690401.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:42.338Z,1509690402.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:42.387Z,1509690402.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:42.715Z,1509690402.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:42.730Z,1509690402.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:43.124Z,1509690403.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:43.139Z,1509690403.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:43.524Z,1509690403.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:43.547Z,1509690403.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:43.921Z,1509690403.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:43.942Z,1509690403.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:44.314Z,1509690404.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:44.335Z,1509690404.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:44.711Z,1509690404.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:44.727Z,1509690404.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:45.113Z,1509690405.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:45.135Z,1509690405.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:45.514Z,1509690405.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:45.535Z,1509690405.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:45.930Z,1509690405.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:45.945Z,1509690405.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:46.326Z,1509690406.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:46.341Z,1509690406.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:46.724Z,1509690406.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:46.739Z,1509690406.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:47.111Z,1509690407.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:47.139Z,1509690407.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:47.516Z,1509690407.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:47.585Z,1509690407.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:47.903Z,1509690407.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:47.943Z,1509690407.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:48.315Z,1509690408.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:48.375Z,1509690408.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:48.707Z,1509690408.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:48.739Z,1509690408.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:48.742Z,1509690408.742 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T06:26:48.742Z,1509690408.742 [Default:CheckIn:C.Wait] Stopped
2017-11-03T06:26:48.742Z,1509690408.742 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T06:26:48.742Z,1509690408.742 [Default:CheckIn:D] Running Loop=1
2017-11-03T06:26:49.127Z,1509690409.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:49.186Z,1509690409.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:49.189Z,1509690409.189 [Default:CheckIn:D] Stopped
2017-11-03T06:26:49.189Z,1509690409.189 [Default:CheckIn:E] Running Loop=1
2017-11-03T06:26:49.529Z,1509690409.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:49.544Z,1509690409.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:49.548Z,1509690409.548 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 371.693717 min 
2017-11-03T06:26:49.548Z,1509690409.548 [Default:CheckIn:E] Stopped
2017-11-03T06:26:49.548Z,1509690409.548 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T06:26:49.548Z,1509690409.548 [Default:CheckIn] Stopped
2017-11-03T06:26:49.548Z,1509690409.548 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T06:26:49.549Z,1509690409.549 [Default:CheckIn](INFO): Running loop #37
2017-11-03T06:26:49.549Z,1509690409.549 [Default:CheckIn] Running Loop=37
2017-11-03T06:26:49.549Z,1509690409.549 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T06:26:49.549Z,1509690409.549 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T06:26:52.737Z,1509690412.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:52.780Z,1509690412.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:52.873Z,1509690412.873 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T06:26:52.873Z,1509690412.873 [DropWeight] No Fault, FailCount= 1
2017-11-03T06:26:52.961Z,1509690412.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:53.051Z,1509690413.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:53.310Z,1509690413.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:53.338Z,1509690413.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:53.712Z,1509690413.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:53.740Z,1509690413.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:54.124Z,1509690414.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:54.139Z,1509690414.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:54.507Z,1509690414.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:54.533Z,1509690414.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:54.931Z,1509690414.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:54.946Z,1509690414.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:55.334Z,1509690415.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:55.349Z,1509690415.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:55.730Z,1509690415.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:55.745Z,1509690415.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:56.104Z,1509690416.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:56.135Z,1509690416.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:56.528Z,1509690416.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:56.543Z,1509690416.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:56.911Z,1509690416.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:56.937Z,1509690416.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:57.310Z,1509690417.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:57.337Z,1509690417.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:57.711Z,1509690417.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:57.738Z,1509690417.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:58.138Z,1509690418.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:58.153Z,1509690418.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:58.530Z,1509690418.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:58.549Z,1509690418.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:58.933Z,1509690418.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:58.947Z,1509690418.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:59.311Z,1509690419.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:59.346Z,1509690419.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:26:59.711Z,1509690419.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:26:59.735Z,1509690419.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:00.107Z,1509690420.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:00.134Z,1509690420.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:00.511Z,1509690420.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:00.538Z,1509690420.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:00.934Z,1509690420.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:00.954Z,1509690420.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:01.330Z,1509690421.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:01.345Z,1509690421.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:01.730Z,1509690421.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:01.750Z,1509690421.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:02.112Z,1509690422.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:02.136Z,1509690422.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:02.508Z,1509690422.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:02.524Z,1509690422.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:02.908Z,1509690422.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:02.931Z,1509690422.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:03.315Z,1509690423.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:03.338Z,1509690423.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:03.712Z,1509690423.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:03.728Z,1509690423.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:04.122Z,1509690424.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:04.182Z,1509690424.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:04.530Z,1509690424.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:04.561Z,1509690424.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:04.930Z,1509690424.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:04.983Z,1509690424.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:05.316Z,1509690425.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:05.332Z,1509690425.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:05.716Z,1509690425.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:05.766Z,1509690425.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:06.131Z,1509690426.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:06.162Z,1509690426.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:06.518Z,1509690426.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:06.572Z,1509690426.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:06.926Z,1509690426.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:06.982Z,1509690426.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:07.322Z,1509690427.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:07.337Z,1509690427.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:07.723Z,1509690427.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:07.743Z,1509690427.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:08.119Z,1509690428.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:08.139Z,1509690428.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:08.510Z,1509690428.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:08.531Z,1509690428.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:08.916Z,1509690428.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:08.933Z,1509690428.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:09.330Z,1509690429.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:09.415Z,1509690429.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:09.719Z,1509690429.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:09.735Z,1509690429.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:10.124Z,1509690430.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:10.140Z,1509690430.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:10.525Z,1509690430.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:10.541Z,1509690430.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:10.925Z,1509690430.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:10.943Z,1509690430.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:11.316Z,1509690431.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:11.332Z,1509690431.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:11.721Z,1509690431.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:11.735Z,1509690431.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:12.107Z,1509690432.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:12.134Z,1509690432.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:12.508Z,1509690432.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:12.535Z,1509690432.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:12.931Z,1509690432.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:12.946Z,1509690432.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:13.333Z,1509690433.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:13.348Z,1509690433.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:13.730Z,1509690433.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:13.745Z,1509690433.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:14.116Z,1509690434.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:14.136Z,1509690434.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:14.518Z,1509690434.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:14.534Z,1509690434.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:14.916Z,1509690434.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:14.932Z,1509690434.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:15.320Z,1509690435.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:15.335Z,1509690435.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:15.718Z,1509690435.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:15.734Z,1509690435.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:16.122Z,1509690436.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:16.137Z,1509690436.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:16.522Z,1509690436.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:16.537Z,1509690436.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:16.922Z,1509690436.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:16.937Z,1509690436.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:17.316Z,1509690437.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:17.332Z,1509690437.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:17.719Z,1509690437.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:17.781Z,1509690437.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:17.911Z,1509690437.911 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:27:17.911Z,1509690437.911 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T06:27:17.911Z,1509690437.911 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:27:18.111Z,1509690438.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:18.138Z,1509690438.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:27:18.139Z,1509690438.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:18.225Z,1509690438.225 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:27:18.316Z,1509690438.316 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:27:18.406Z,1509690438.406 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:27:18.525Z,1509690438.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:18.541Z,1509690438.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:27:18.542Z,1509690438.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:18.926Z,1509690438.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:18.994Z,1509690438.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:27:18.995Z,1509690438.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:19.330Z,1509690439.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:19.345Z,1509690439.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:27:19.346Z,1509690439.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:19.727Z,1509690439.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:19.782Z,1509690439.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:27:19.783Z,1509690439.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:19.881Z,1509690439.881 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:27:19.881Z,1509690439.881 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T06:27:20.021Z,1509690440.021 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:27:20.021Z,1509690440.021 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:27:20.021Z,1509690440.021 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:27:20.021Z,1509690440.021 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:27:20.105Z,1509690440.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:20.138Z,1509690440.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:27:20.139Z,1509690440.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:20.519Z,1509690440.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:20.578Z,1509690440.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:27:20.579Z,1509690440.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:20.917Z,1509690440.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:20.970Z,1509690440.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:27:20.971Z,1509690440.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:21.319Z,1509690441.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:21.335Z,1509690441.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:27:21.335Z,1509690441.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:21.719Z,1509690441.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:21.735Z,1509690441.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:27:21.736Z,1509690441.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:22.130Z,1509690442.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:22.145Z,1509690442.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:27:22.146Z,1509690442.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:22.534Z,1509690442.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:22.554Z,1509690442.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:27:22.555Z,1509690442.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:22.930Z,1509690442.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:22.944Z,1509690442.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:27:22.945Z,1509690442.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:23.305Z,1509690443.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:23.338Z,1509690443.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:27:23.339Z,1509690443.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:23.722Z,1509690443.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:23.737Z,1509690443.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:27:23.738Z,1509690443.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:24.134Z,1509690444.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:24.179Z,1509690444.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:27:24.180Z,1509690444.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:24.254Z,1509690444.254 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:27:24.339Z,1509690444.339 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:27:24.340Z,1509690444.340 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:27:24.341Z,1509690444.341 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:27:24.342Z,1509690444.342 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:27:24.509Z,1509690444.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:24.541Z,1509690444.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:27:24.542Z,1509690444.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:24.922Z,1509690444.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:24.938Z,1509690444.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:25.323Z,1509690445.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:25.358Z,1509690445.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:25.722Z,1509690445.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:25.740Z,1509690445.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:26.118Z,1509690446.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:26.133Z,1509690446.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:26.519Z,1509690446.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:26.539Z,1509690446.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:26.918Z,1509690446.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:26.939Z,1509690446.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:27.320Z,1509690447.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:27.336Z,1509690447.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:27.719Z,1509690447.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:27.734Z,1509690447.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:28.123Z,1509690448.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:28.143Z,1509690448.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:28.526Z,1509690448.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:28.541Z,1509690448.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:28.923Z,1509690448.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:28.943Z,1509690448.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:29.316Z,1509690449.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:29.333Z,1509690449.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:29.712Z,1509690449.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:29.728Z,1509690449.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:30.118Z,1509690450.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:30.135Z,1509690450.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:30.516Z,1509690450.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:30.532Z,1509690450.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:30.935Z,1509690450.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:30.971Z,1509690450.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:31.335Z,1509690451.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:31.403Z,1509690451.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:31.729Z,1509690451.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:31.744Z,1509690451.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:32.119Z,1509690452.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:32.134Z,1509690452.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:32.518Z,1509690452.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:32.539Z,1509690452.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:32.917Z,1509690452.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:32.985Z,1509690452.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:33.321Z,1509690453.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:33.335Z,1509690453.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:33.717Z,1509690453.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:33.799Z,1509690453.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:34.130Z,1509690454.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:34.145Z,1509690454.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:34.534Z,1509690454.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:34.575Z,1509690454.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:34.930Z,1509690454.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:34.983Z,1509690454.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:35.308Z,1509690455.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:35.342Z,1509690455.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:35.709Z,1509690455.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:35.736Z,1509690455.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:36.108Z,1509690456.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:36.142Z,1509690456.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:36.508Z,1509690456.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:36.543Z,1509690456.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:36.922Z,1509690456.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:36.952Z,1509690456.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:37.321Z,1509690457.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:37.352Z,1509690457.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:37.726Z,1509690457.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:37.756Z,1509690457.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:38.115Z,1509690458.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:38.134Z,1509690458.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:38.519Z,1509690458.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:38.535Z,1509690458.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:38.916Z,1509690458.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:38.931Z,1509690458.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:39.320Z,1509690459.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:39.335Z,1509690459.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:39.719Z,1509690459.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:39.735Z,1509690459.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:40.137Z,1509690460.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:40.153Z,1509690460.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:40.530Z,1509690460.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:40.545Z,1509690460.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:40.929Z,1509690460.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:40.944Z,1509690460.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:41.308Z,1509690461.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:41.339Z,1509690461.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:41.711Z,1509690461.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:41.738Z,1509690461.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:42.119Z,1509690462.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:42.145Z,1509690462.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:42.508Z,1509690462.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:42.539Z,1509690462.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:42.931Z,1509690462.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:42.945Z,1509690462.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:43.330Z,1509690463.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:43.345Z,1509690463.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:43.730Z,1509690463.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:43.745Z,1509690463.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:44.141Z,1509690464.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:44.157Z,1509690464.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:44.508Z,1509690464.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:44.539Z,1509690464.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:44.906Z,1509690464.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:44.941Z,1509690464.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:45.309Z,1509690465.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:45.341Z,1509690465.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:45.712Z,1509690465.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:45.767Z,1509690465.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:46.123Z,1509690466.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:46.155Z,1509690466.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:46.518Z,1509690466.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:46.552Z,1509690466.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:46.923Z,1509690466.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:46.949Z,1509690466.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:47.309Z,1509690467.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:47.345Z,1509690467.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:47.716Z,1509690467.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:47.745Z,1509690467.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:48.112Z,1509690468.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:48.144Z,1509690468.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:48.511Z,1509690468.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:48.528Z,1509690468.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:48.921Z,1509690468.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:48.954Z,1509690468.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:49.322Z,1509690469.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:49.349Z,1509690469.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:49.726Z,1509690469.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:49.759Z,1509690469.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:52.920Z,1509690472.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:52.929Z,1509690472.929 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:27:52.929Z,1509690472.929 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:27:52.929Z,1509690472.929 [BPC1](ERROR): Communications Fault
2017-11-03T06:27:52.963Z,1509690472.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:53.040Z,1509690473.040 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:27:53.073Z,1509690473.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:53.111Z,1509690473.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:53.497Z,1509690473.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:53.512Z,1509690473.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:53.904Z,1509690473.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:53.927Z,1509690473.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:54.009Z,1509690474.009 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:27:54.009Z,1509690474.009 [BPC1] No Fault, FailCount= 1
2017-11-03T06:27:54.299Z,1509690474.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:54.371Z,1509690474.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:54.676Z,1509690474.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:54.747Z,1509690474.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:55.074Z,1509690475.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:55.108Z,1509690475.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:55.479Z,1509690475.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:55.505Z,1509690475.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:55.917Z,1509690475.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:55.967Z,1509690475.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:56.301Z,1509690476.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:56.315Z,1509690476.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:56.689Z,1509690476.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:56.719Z,1509690476.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:57.079Z,1509690477.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:57.103Z,1509690477.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:57.476Z,1509690477.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:57.491Z,1509690477.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:57.876Z,1509690477.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:57.915Z,1509690477.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:58.291Z,1509690478.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:58.320Z,1509690478.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:58.676Z,1509690478.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:58.690Z,1509690478.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:59.089Z,1509690479.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:59.120Z,1509690479.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:59.485Z,1509690479.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:59.519Z,1509690479.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:27:59.889Z,1509690479.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:27:59.920Z,1509690479.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:00.276Z,1509690480.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:00.291Z,1509690480.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:00.692Z,1509690480.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:00.707Z,1509690480.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:01.082Z,1509690481.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:01.097Z,1509690481.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:01.486Z,1509690481.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:01.501Z,1509690481.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:01.893Z,1509690481.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:01.909Z,1509690481.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:02.293Z,1509690482.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:02.308Z,1509690482.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:02.702Z,1509690482.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:02.717Z,1509690482.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:03.077Z,1509690483.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:03.108Z,1509690483.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:03.477Z,1509690483.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:03.514Z,1509690483.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:03.882Z,1509690483.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:03.926Z,1509690483.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:04.277Z,1509690484.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:04.293Z,1509690484.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:04.679Z,1509690484.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:04.695Z,1509690484.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:05.106Z,1509690485.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:05.121Z,1509690485.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:05.489Z,1509690485.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:05.546Z,1509690485.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:05.909Z,1509690485.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:05.924Z,1509690485.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:06.280Z,1509690486.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:06.323Z,1509690486.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:06.676Z,1509690486.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:06.730Z,1509690486.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:07.083Z,1509690487.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:07.098Z,1509690487.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:07.480Z,1509690487.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:07.539Z,1509690487.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:07.921Z,1509690487.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:07.974Z,1509690487.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:08.297Z,1509690488.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:08.327Z,1509690488.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:08.693Z,1509690488.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:08.718Z,1509690488.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:09.083Z,1509690489.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:09.098Z,1509690489.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:09.479Z,1509690489.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:09.494Z,1509690489.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:09.911Z,1509690489.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:09.974Z,1509690489.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:10.280Z,1509690490.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:10.295Z,1509690490.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:10.680Z,1509690490.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:10.695Z,1509690490.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:11.093Z,1509690491.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:11.124Z,1509690491.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:11.493Z,1509690491.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:11.524Z,1509690491.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:11.884Z,1509690491.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:11.899Z,1509690491.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:12.291Z,1509690492.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:12.323Z,1509690492.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:12.676Z,1509690492.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:12.699Z,1509690492.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:13.076Z,1509690493.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:13.113Z,1509690493.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:13.484Z,1509690493.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:13.507Z,1509690493.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:13.898Z,1509690493.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:13.926Z,1509690493.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:14.297Z,1509690494.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:14.373Z,1509690494.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:14.690Z,1509690494.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:14.705Z,1509690494.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:15.082Z,1509690495.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:15.101Z,1509690495.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:15.484Z,1509690495.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:15.502Z,1509690495.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:15.885Z,1509690495.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:15.900Z,1509690495.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:16.284Z,1509690496.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:16.299Z,1509690496.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:16.678Z,1509690496.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:16.711Z,1509690496.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:17.092Z,1509690497.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:17.107Z,1509690497.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:17.492Z,1509690497.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:17.507Z,1509690497.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:17.898Z,1509690497.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:17.913Z,1509690497.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:18.284Z,1509690498.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:18.342Z,1509690498.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:18.685Z,1509690498.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:18.743Z,1509690498.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:19.086Z,1509690499.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:19.107Z,1509690499.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:19.487Z,1509690499.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:19.507Z,1509690499.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:19.904Z,1509690499.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:19.955Z,1509690499.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:20.299Z,1509690500.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:20.318Z,1509690500.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:20.698Z,1509690500.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:20.747Z,1509690500.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:21.085Z,1509690501.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:21.146Z,1509690501.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:21.487Z,1509690501.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:21.503Z,1509690501.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:21.905Z,1509690501.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:21.921Z,1509690501.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:22.288Z,1509690502.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:22.303Z,1509690502.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:22.688Z,1509690502.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:22.704Z,1509690502.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:23.098Z,1509690503.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:23.114Z,1509690503.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:23.497Z,1509690503.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:23.513Z,1509690503.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:23.914Z,1509690503.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:23.948Z,1509690503.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:24.279Z,1509690504.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:24.305Z,1509690504.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:24.677Z,1509690504.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:24.707Z,1509690504.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:25.072Z,1509690505.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:25.102Z,1509690505.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:25.472Z,1509690505.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:25.501Z,1509690505.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:25.888Z,1509690505.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:25.911Z,1509690505.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:26.298Z,1509690506.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:26.318Z,1509690506.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:26.698Z,1509690506.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:26.713Z,1509690506.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:27.076Z,1509690507.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:27.102Z,1509690507.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:27.475Z,1509690507.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:27.501Z,1509690507.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:27.879Z,1509690507.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:27.905Z,1509690507.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:28.277Z,1509690508.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:28.303Z,1509690508.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:28.687Z,1509690508.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:28.714Z,1509690508.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:29.089Z,1509690509.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:29.123Z,1509690509.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:29.489Z,1509690509.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:29.515Z,1509690509.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:29.889Z,1509690509.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:29.916Z,1509690509.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:30.279Z,1509690510.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:30.354Z,1509690510.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:30.679Z,1509690510.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:30.718Z,1509690510.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:31.080Z,1509690511.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:31.117Z,1509690511.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:31.476Z,1509690511.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:31.491Z,1509690511.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:31.903Z,1509690511.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:31.943Z,1509690511.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:32.293Z,1509690512.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:32.350Z,1509690512.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:32.686Z,1509690512.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:32.701Z,1509690512.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:33.081Z,1509690513.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:33.096Z,1509690513.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:33.483Z,1509690513.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:33.535Z,1509690513.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:33.894Z,1509690513.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:33.925Z,1509690513.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:34.281Z,1509690514.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:34.334Z,1509690514.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:34.681Z,1509690514.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:34.730Z,1509690514.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:35.093Z,1509690515.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:35.121Z,1509690515.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:35.493Z,1509690515.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:35.524Z,1509690515.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:35.916Z,1509690515.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:35.931Z,1509690515.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:36.281Z,1509690516.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:36.296Z,1509690516.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:36.680Z,1509690516.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:36.695Z,1509690516.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:37.082Z,1509690517.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:37.096Z,1509690517.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:37.480Z,1509690517.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:37.495Z,1509690517.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:37.921Z,1509690517.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:37.950Z,1509690517.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:38.297Z,1509690518.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:38.321Z,1509690518.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:38.693Z,1509690518.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:38.723Z,1509690518.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:39.080Z,1509690519.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:39.103Z,1509690519.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:39.480Z,1509690519.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:39.495Z,1509690519.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:39.881Z,1509690519.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:39.896Z,1509690519.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:40.285Z,1509690520.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:40.323Z,1509690520.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:40.681Z,1509690520.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:40.702Z,1509690520.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:41.098Z,1509690521.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:41.121Z,1509690521.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:41.494Z,1509690521.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:41.523Z,1509690521.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:41.898Z,1509690521.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:41.921Z,1509690521.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:42.280Z,1509690522.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:42.296Z,1509690522.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:42.691Z,1509690522.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:42.728Z,1509690522.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:43.085Z,1509690523.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:43.101Z,1509690523.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:43.484Z,1509690523.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:43.499Z,1509690523.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:43.890Z,1509690523.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:43.905Z,1509690523.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:44.297Z,1509690524.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:44.372Z,1509690524.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:44.688Z,1509690524.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:44.710Z,1509690524.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:45.084Z,1509690525.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:45.099Z,1509690525.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:45.486Z,1509690525.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:45.546Z,1509690525.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:45.893Z,1509690525.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:45.908Z,1509690525.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:46.285Z,1509690526.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:46.300Z,1509690526.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:46.685Z,1509690526.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:46.700Z,1509690526.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:47.094Z,1509690527.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:47.109Z,1509690527.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:47.496Z,1509690527.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:47.515Z,1509690527.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:47.902Z,1509690527.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:47.917Z,1509690527.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:48.284Z,1509690528.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:48.299Z,1509690528.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:48.684Z,1509690528.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:48.699Z,1509690528.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:49.089Z,1509690529.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:49.104Z,1509690529.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:49.485Z,1509690529.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:49.500Z,1509690529.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:49.903Z,1509690529.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:49.911Z,1509690529.911 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:28:49.912Z,1509690529.912 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:28:49.912Z,1509690529.912 [BPC1](ERROR): Communications Fault
2017-11-03T06:28:49.920Z,1509690529.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:50.016Z,1509690530.016 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:28:53.150Z,1509690533.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:53.165Z,1509690533.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:53.304Z,1509690533.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:53.320Z,1509690533.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:53.694Z,1509690533.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:53.709Z,1509690533.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:53.793Z,1509690533.793 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:28:53.793Z,1509690533.793 [BPC1] No Fault, FailCount= 1
2017-11-03T06:28:54.124Z,1509690534.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:54.207Z,1509690534.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:54.495Z,1509690534.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:54.554Z,1509690534.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:54.902Z,1509690534.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:54.917Z,1509690534.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:55.301Z,1509690535.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:55.316Z,1509690535.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:55.700Z,1509690535.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:55.715Z,1509690535.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:56.092Z,1509690536.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:56.108Z,1509690536.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:56.494Z,1509690536.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:56.514Z,1509690536.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:56.892Z,1509690536.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:56.907Z,1509690536.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:57.294Z,1509690537.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:57.309Z,1509690537.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:57.693Z,1509690537.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:57.708Z,1509690537.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:58.104Z,1509690538.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:58.120Z,1509690538.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:58.505Z,1509690538.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:58.521Z,1509690538.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:58.905Z,1509690538.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:58.921Z,1509690538.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:59.295Z,1509690539.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:59.310Z,1509690539.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:28:59.697Z,1509690539.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:28:59.712Z,1509690539.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:00.084Z,1509690540.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:00.123Z,1509690540.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:00.485Z,1509690540.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:00.500Z,1509690540.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:00.898Z,1509690540.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:00.921Z,1509690540.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:01.302Z,1509690541.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:01.334Z,1509690541.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:01.702Z,1509690541.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:01.735Z,1509690541.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:02.094Z,1509690542.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:02.109Z,1509690542.109 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:02.110Z,1509690542.110 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 125
2017-11-03T06:29:02.110Z,1509690542.110 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:29:02.111Z,1509690542.111 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:02.111Z,1509690542.111 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 125
2017-11-03T06:29:02.112Z,1509690542.112 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:29:02.125Z,1509690542.125 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:02.126Z,1509690542.126 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 125
2017-11-03T06:29:02.126Z,1509690542.126 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:29:02.224Z,1509690542.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:29:02.224Z,1509690542.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:29:02.225Z,1509690542.225 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:29:02.493Z,1509690542.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:02.592Z,1509690542.592 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:29:02.592Z,1509690542.592 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 125
2017-11-03T06:29:02.593Z,1509690542.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:29:02.593Z,1509690542.593 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 125
2017-11-03T06:29:02.593Z,1509690542.593 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:29:02.593Z,1509690542.593 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 125
2017-11-03T06:29:02.888Z,1509690542.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:02.906Z,1509690542.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:29:02.907Z,1509690542.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:29:02.907Z,1509690542.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:29:02.907Z,1509690542.907 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:29:02.908Z,1509690542.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:29:02.909Z,1509690542.909 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:29:02.910Z,1509690542.910 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:29:02.910Z,1509690542.910 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:29:02.910Z,1509690542.910 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:29:03.299Z,1509690543.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:03.320Z,1509690543.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:03.693Z,1509690543.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:03.707Z,1509690543.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:04.096Z,1509690544.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:04.120Z,1509690544.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:04.503Z,1509690544.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:04.523Z,1509690544.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:04.905Z,1509690544.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:04.914Z,1509690544.914 [BPC1](ERROR): Failed to parse message.
2017-11-03T06:29:04.914Z,1509690544.914 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:29:04.914Z,1509690544.914 [BPC1] Data Fault, FailCount= 2
2017-11-03T06:29:04.914Z,1509690544.914 [BPC1](ERROR): Data Fault
2017-11-03T06:29:04.922Z,1509690544.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:05.041Z,1509690545.041 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:29:05.289Z,1509690545.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:05.310Z,1509690545.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:05.687Z,1509690545.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:05.712Z,1509690545.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:06.086Z,1509690546.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:06.119Z,1509690546.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:06.201Z,1509690546.201 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:29:06.201Z,1509690546.201 [BPC1] No Fault, FailCount= 2
2017-11-03T06:29:06.487Z,1509690546.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:06.563Z,1509690546.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:06.903Z,1509690546.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:06.923Z,1509690546.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:07.305Z,1509690547.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:07.356Z,1509690547.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:07.709Z,1509690547.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:07.725Z,1509690547.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:08.111Z,1509690548.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:08.161Z,1509690548.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:08.485Z,1509690548.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:08.513Z,1509690548.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:08.887Z,1509690548.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:08.913Z,1509690548.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:09.288Z,1509690549.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:09.314Z,1509690549.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:09.684Z,1509690549.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:09.722Z,1509690549.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:10.105Z,1509690550.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:10.121Z,1509690550.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:10.505Z,1509690550.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:10.520Z,1509690550.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:10.910Z,1509690550.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:10.925Z,1509690550.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:11.287Z,1509690551.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:11.312Z,1509690551.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:11.684Z,1509690551.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:11.714Z,1509690551.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:12.088Z,1509690552.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:12.113Z,1509690552.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:12.485Z,1509690552.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:12.519Z,1509690552.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:12.905Z,1509690552.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:12.921Z,1509690552.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:13.306Z,1509690553.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:13.321Z,1509690553.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:13.705Z,1509690553.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:13.721Z,1509690553.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:14.095Z,1509690554.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:14.119Z,1509690554.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:14.489Z,1509690554.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:14.504Z,1509690554.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:14.888Z,1509690554.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:14.903Z,1509690554.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:15.288Z,1509690555.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:15.311Z,1509690555.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:15.689Z,1509690555.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:15.703Z,1509690555.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:16.106Z,1509690556.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:16.130Z,1509690556.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:16.497Z,1509690556.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:16.512Z,1509690556.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:16.894Z,1509690556.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:16.914Z,1509690556.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:17.296Z,1509690557.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:17.311Z,1509690557.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:17.687Z,1509690557.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:17.706Z,1509690557.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:18.097Z,1509690558.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:18.166Z,1509690558.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:18.494Z,1509690558.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:18.509Z,1509690558.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:18.901Z,1509690558.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:18.917Z,1509690558.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:19.302Z,1509690559.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:19.317Z,1509690559.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:19.701Z,1509690559.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:19.766Z,1509690559.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:20.090Z,1509690560.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:20.110Z,1509690560.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:20.497Z,1509690560.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:20.554Z,1509690560.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:20.895Z,1509690560.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:20.911Z,1509690560.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:21.294Z,1509690561.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:21.354Z,1509690561.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:21.696Z,1509690561.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:21.744Z,1509690561.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:22.125Z,1509690562.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:22.163Z,1509690562.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:22.497Z,1509690562.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:22.513Z,1509690562.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:22.897Z,1509690562.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:22.919Z,1509690562.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:23.286Z,1509690563.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:23.317Z,1509690563.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:23.697Z,1509690563.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:23.712Z,1509690563.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:24.097Z,1509690564.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:24.112Z,1509690564.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:24.489Z,1509690564.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:24.515Z,1509690564.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:24.905Z,1509690564.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:24.920Z,1509690564.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:25.305Z,1509690565.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:25.321Z,1509690565.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:25.704Z,1509690565.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:25.730Z,1509690565.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:26.092Z,1509690566.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:26.107Z,1509690566.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:26.490Z,1509690566.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:26.509Z,1509690566.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:26.896Z,1509690566.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:26.919Z,1509690566.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:27.295Z,1509690567.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:27.310Z,1509690567.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:27.695Z,1509690567.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:27.710Z,1509690567.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:28.105Z,1509690568.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:28.130Z,1509690568.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:28.501Z,1509690568.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:28.534Z,1509690568.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:28.901Z,1509690568.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:28.934Z,1509690568.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:29.288Z,1509690569.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:29.303Z,1509690569.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:29.691Z,1509690569.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:29.711Z,1509690569.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:30.096Z,1509690570.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:30.111Z,1509690570.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:30.488Z,1509690570.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:30.507Z,1509690570.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:30.902Z,1509690570.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:30.933Z,1509690570.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:31.305Z,1509690571.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:31.341Z,1509690571.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:31.706Z,1509690571.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:31.737Z,1509690571.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:32.086Z,1509690572.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:32.109Z,1509690572.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:32.493Z,1509690572.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:32.561Z,1509690572.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:32.895Z,1509690572.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:32.915Z,1509690572.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:33.296Z,1509690573.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:33.311Z,1509690573.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:33.697Z,1509690573.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:33.760Z,1509690573.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:34.104Z,1509690574.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:34.120Z,1509690574.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:34.504Z,1509690574.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:34.520Z,1509690574.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:34.905Z,1509690574.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:34.950Z,1509690574.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:35.292Z,1509690575.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:35.307Z,1509690575.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:35.692Z,1509690575.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:35.750Z,1509690575.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:36.111Z,1509690576.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:36.163Z,1509690576.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:36.494Z,1509690576.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:36.509Z,1509690576.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:36.904Z,1509690576.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:36.920Z,1509690576.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:37.305Z,1509690577.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:37.320Z,1509690577.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:37.705Z,1509690577.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:37.721Z,1509690577.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:38.097Z,1509690578.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:38.112Z,1509690578.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:38.493Z,1509690578.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:38.512Z,1509690578.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:38.893Z,1509690578.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:38.907Z,1509690578.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:39.294Z,1509690579.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:39.309Z,1509690579.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:39.695Z,1509690579.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:39.715Z,1509690579.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:40.105Z,1509690580.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:40.120Z,1509690580.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:40.504Z,1509690580.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:40.521Z,1509690580.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:40.904Z,1509690580.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:40.921Z,1509690580.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:41.291Z,1509690581.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:41.330Z,1509690581.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:41.686Z,1509690581.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:41.707Z,1509690581.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:42.086Z,1509690582.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:42.101Z,1509690582.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:42.483Z,1509690582.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:42.499Z,1509690582.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:42.901Z,1509690582.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:42.927Z,1509690582.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:43.301Z,1509690583.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:43.327Z,1509690583.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:43.698Z,1509690583.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:43.733Z,1509690583.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:44.087Z,1509690584.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:44.107Z,1509690584.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:44.490Z,1509690584.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:44.511Z,1509690584.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:44.888Z,1509690584.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:44.903Z,1509690584.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:45.289Z,1509690585.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:45.304Z,1509690585.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:45.692Z,1509690585.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:45.707Z,1509690585.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:46.106Z,1509690586.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:46.129Z,1509690586.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:46.501Z,1509690586.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:46.534Z,1509690586.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:46.901Z,1509690586.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:46.963Z,1509690586.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:47.288Z,1509690587.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:47.303Z,1509690587.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:47.689Z,1509690587.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:47.704Z,1509690587.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:48.093Z,1509690588.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:48.108Z,1509690588.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:48.488Z,1509690588.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:48.550Z,1509690588.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:48.901Z,1509690588.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:48.933Z,1509690588.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:49.305Z,1509690589.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:49.355Z,1509690589.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:49.698Z,1509690589.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:49.734Z,1509690589.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:50.107Z,1509690590.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:50.167Z,1509690590.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:53.308Z,1509690593.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:53.347Z,1509690593.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:53.481Z,1509690593.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:53.515Z,1509690593.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:53.889Z,1509690593.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:53.904Z,1509690593.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:54.289Z,1509690594.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:54.369Z,1509690594.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:54.690Z,1509690594.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:54.705Z,1509690594.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:55.069Z,1509690595.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:55.098Z,1509690595.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:55.472Z,1509690595.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:55.498Z,1509690595.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:55.872Z,1509690595.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:55.903Z,1509690595.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:56.270Z,1509690596.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:56.297Z,1509690596.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:56.669Z,1509690596.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:56.697Z,1509690596.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:57.091Z,1509690597.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:57.107Z,1509690597.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:57.489Z,1509690597.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:57.504Z,1509690597.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:57.906Z,1509690597.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:57.927Z,1509690597.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:58.272Z,1509690598.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:58.299Z,1509690598.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:58.664Z,1509690598.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:58.695Z,1509690598.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:59.070Z,1509690599.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:59.107Z,1509690599.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:59.468Z,1509690599.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:59.499Z,1509690599.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:29:59.907Z,1509690599.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:29:59.927Z,1509690599.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:00.281Z,1509690600.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:00.311Z,1509690600.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:00.681Z,1509690600.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:00.707Z,1509690600.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:01.069Z,1509690601.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:01.100Z,1509690601.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:01.468Z,1509690601.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:01.483Z,1509690601.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:01.909Z,1509690601.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:01.961Z,1509690601.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:02.269Z,1509690602.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:02.283Z,1509690602.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:02.671Z,1509690602.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:02.687Z,1509690602.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:03.086Z,1509690603.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:03.115Z,1509690603.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:03.481Z,1509690603.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:03.506Z,1509690603.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:03.886Z,1509690603.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:03.915Z,1509690603.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:04.275Z,1509690604.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:04.328Z,1509690604.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:04.672Z,1509690604.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:04.687Z,1509690604.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:05.076Z,1509690605.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:05.110Z,1509690605.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:05.468Z,1509690605.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:05.522Z,1509690605.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:05.885Z,1509690605.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:05.910Z,1509690605.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:06.289Z,1509690606.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:06.379Z,1509690606.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:06.689Z,1509690606.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:06.758Z,1509690606.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:07.073Z,1509690607.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:07.087Z,1509690607.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:07.473Z,1509690607.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:07.531Z,1509690607.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:07.875Z,1509690607.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:07.931Z,1509690607.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:08.274Z,1509690608.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:08.289Z,1509690608.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:08.678Z,1509690608.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:08.699Z,1509690608.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:09.084Z,1509690609.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:09.100Z,1509690609.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:09.485Z,1509690609.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:09.507Z,1509690609.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:09.888Z,1509690609.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:09.907Z,1509690609.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:10.280Z,1509690610.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:10.295Z,1509690610.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:10.681Z,1509690610.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:10.697Z,1509690610.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:11.080Z,1509690611.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:11.095Z,1509690611.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:11.473Z,1509690611.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:11.492Z,1509690611.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:11.895Z,1509690611.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:11.914Z,1509690611.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:12.290Z,1509690612.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:12.305Z,1509690612.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:12.689Z,1509690612.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:12.704Z,1509690612.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:13.079Z,1509690613.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:13.095Z,1509690613.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:13.479Z,1509690613.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:13.495Z,1509690613.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:13.896Z,1509690613.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:13.950Z,1509690613.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:14.270Z,1509690614.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:14.297Z,1509690614.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:14.665Z,1509690614.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:14.694Z,1509690614.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:15.090Z,1509690615.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:15.106Z,1509690615.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:15.489Z,1509690615.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:15.504Z,1509690615.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:15.939Z,1509690615.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:15.966Z,1509690615.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:16.269Z,1509690616.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:16.300Z,1509690616.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:16.668Z,1509690616.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:16.683Z,1509690616.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:17.069Z,1509690617.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:17.084Z,1509690617.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:17.465Z,1509690617.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:17.480Z,1509690617.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:17.881Z,1509690617.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:17.909Z,1509690617.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:18.285Z,1509690618.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:18.307Z,1509690618.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:18.682Z,1509690618.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:18.707Z,1509690618.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:19.069Z,1509690619.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:19.084Z,1509690619.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:19.470Z,1509690619.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:19.511Z,1509690619.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:19.872Z,1509690619.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:19.919Z,1509690619.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:20.269Z,1509690620.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:20.284Z,1509690620.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:20.675Z,1509690620.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:20.723Z,1509690620.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:21.084Z,1509690621.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:21.099Z,1509690621.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:21.483Z,1509690621.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:21.531Z,1509690621.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:21.885Z,1509690621.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:21.906Z,1509690621.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:22.272Z,1509690622.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:22.360Z,1509690622.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:22.677Z,1509690622.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:22.698Z,1509690622.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:23.080Z,1509690623.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:23.103Z,1509690623.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:23.465Z,1509690623.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:23.490Z,1509690623.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:23.897Z,1509690623.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:23.913Z,1509690623.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:24.290Z,1509690624.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:24.305Z,1509690624.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:24.685Z,1509690624.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:24.700Z,1509690624.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:25.077Z,1509690625.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:25.099Z,1509690625.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:25.464Z,1509690625.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:25.490Z,1509690625.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:25.890Z,1509690625.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:25.905Z,1509690625.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:26.281Z,1509690626.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:26.295Z,1509690626.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:26.679Z,1509690626.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:26.694Z,1509690626.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:27.090Z,1509690627.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:27.105Z,1509690627.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:27.488Z,1509690627.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:27.503Z,1509690627.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:27.895Z,1509690627.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:27.919Z,1509690627.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:28.289Z,1509690628.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:28.311Z,1509690628.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:28.677Z,1509690628.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:28.698Z,1509690628.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:29.080Z,1509690629.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:29.094Z,1509690629.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:29.477Z,1509690629.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:29.497Z,1509690629.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:29.920Z,1509690629.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:29.948Z,1509690629.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:30.292Z,1509690630.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:30.307Z,1509690630.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:30.689Z,1509690630.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:30.704Z,1509690630.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:31.077Z,1509690631.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:31.098Z,1509690631.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:31.480Z,1509690631.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:31.494Z,1509690631.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:31.878Z,1509690631.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:31.899Z,1509690631.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:32.285Z,1509690632.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:32.299Z,1509690632.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:32.680Z,1509690632.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:32.694Z,1509690632.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:33.089Z,1509690633.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:33.104Z,1509690633.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:33.489Z,1509690633.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:33.505Z,1509690633.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:33.890Z,1509690633.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:33.950Z,1509690633.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:34.269Z,1509690634.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:34.380Z,1509690634.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:34.668Z,1509690634.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:34.713Z,1509690634.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:35.072Z,1509690635.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:35.123Z,1509690635.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:35.471Z,1509690635.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:35.486Z,1509690635.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:35.885Z,1509690635.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:35.949Z,1509690635.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:36.285Z,1509690636.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:36.378Z,1509690636.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:36.682Z,1509690636.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:36.707Z,1509690636.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:37.068Z,1509690637.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:37.084Z,1509690637.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:37.471Z,1509690637.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:37.486Z,1509690637.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:37.875Z,1509690637.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:37.910Z,1509690637.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:38.269Z,1509690638.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:38.285Z,1509690638.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:38.668Z,1509690638.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:38.691Z,1509690638.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:39.089Z,1509690639.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:39.119Z,1509690639.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:39.481Z,1509690639.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:39.512Z,1509690639.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:39.892Z,1509690639.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:39.911Z,1509690639.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:40.277Z,1509690640.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:40.292Z,1509690640.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:40.734Z,1509690640.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:40.775Z,1509690640.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:41.076Z,1509690641.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:41.091Z,1509690641.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:41.476Z,1509690641.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:41.491Z,1509690641.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:41.910Z,1509690641.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:41.925Z,1509690641.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:42.289Z,1509690642.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:42.304Z,1509690642.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:42.689Z,1509690642.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:42.720Z,1509690642.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:43.077Z,1509690643.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:43.092Z,1509690643.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:43.473Z,1509690643.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:43.487Z,1509690643.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:43.903Z,1509690643.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:43.949Z,1509690643.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:44.277Z,1509690644.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:44.292Z,1509690644.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:44.678Z,1509690644.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:44.693Z,1509690644.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:45.082Z,1509690645.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:45.097Z,1509690645.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:45.489Z,1509690645.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:45.522Z,1509690645.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:45.889Z,1509690645.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:45.904Z,1509690645.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:46.287Z,1509690646.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:46.302Z,1509690646.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:46.676Z,1509690646.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:46.691Z,1509690646.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:47.081Z,1509690647.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:47.102Z,1509690647.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:47.478Z,1509690647.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:47.493Z,1509690647.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:47.888Z,1509690647.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:47.911Z,1509690647.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:48.289Z,1509690648.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:48.387Z,1509690648.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:48.686Z,1509690648.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:48.727Z,1509690648.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:49.069Z,1509690649.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:49.104Z,1509690649.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:49.469Z,1509690649.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:49.519Z,1509690649.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:49.863Z,1509690649.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:49.879Z,1509690649.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:50.273Z,1509690650.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:50.373Z,1509690650.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:53.639Z,1509690653.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:53.701Z,1509690653.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:53.893Z,1509690653.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:53.920Z,1509690653.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:54.256Z,1509690654.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:54.272Z,1509690654.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:54.657Z,1509690654.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:54.672Z,1509690654.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:55.046Z,1509690655.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:55.061Z,1509690655.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:55.445Z,1509690655.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:55.460Z,1509690655.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:55.882Z,1509690655.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:55.908Z,1509690655.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:56.253Z,1509690656.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:56.269Z,1509690656.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:56.657Z,1509690656.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:56.672Z,1509690656.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:57.048Z,1509690657.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:57.063Z,1509690657.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:57.444Z,1509690657.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:57.459Z,1509690657.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:57.877Z,1509690657.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:57.940Z,1509690657.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:58.249Z,1509690658.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:58.275Z,1509690658.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:58.658Z,1509690658.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:58.674Z,1509690658.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:59.064Z,1509690659.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:59.087Z,1509690659.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:59.467Z,1509690659.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:59.518Z,1509690659.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:30:59.858Z,1509690659.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:30:59.873Z,1509690659.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:00.258Z,1509690660.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:00.287Z,1509690660.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:00.659Z,1509690660.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:00.679Z,1509690660.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:01.046Z,1509690661.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:01.077Z,1509690661.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:01.461Z,1509690661.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:01.509Z,1509690661.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:01.847Z,1509690661.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:01.887Z,1509690661.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:02.251Z,1509690662.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:02.294Z,1509690662.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:02.415Z,1509690662.415 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:31:02.415Z,1509690662.415 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T06:31:02.415Z,1509690662.415 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:31:02.457Z,1509690662.457 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:31:02.676Z,1509690662.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:02.711Z,1509690662.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:31:02.717Z,1509690662.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:02.820Z,1509690662.820 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:31:02.933Z,1509690662.933 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:31:03.047Z,1509690663.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:03.062Z,1509690663.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:31:03.063Z,1509690663.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:03.444Z,1509690663.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:03.459Z,1509690663.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:31:03.461Z,1509690663.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:03.846Z,1509690663.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:03.926Z,1509690663.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:31:03.927Z,1509690663.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:04.238Z,1509690664.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:04.318Z,1509690664.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:31:04.319Z,1509690664.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:04.405Z,1509690664.405 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:31:04.405Z,1509690664.405 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T06:31:04.549Z,1509690664.549 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:31:04.549Z,1509690664.549 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:31:04.549Z,1509690664.549 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:31:04.549Z,1509690664.549 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:31:04.674Z,1509690664.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:04.713Z,1509690664.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:31:04.714Z,1509690664.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:05.047Z,1509690665.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:05.075Z,1509690665.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:31:05.081Z,1509690665.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:05.452Z,1509690665.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:05.537Z,1509690665.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:31:05.538Z,1509690665.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:05.852Z,1509690665.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:05.974Z,1509690665.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T06:31:05.975Z,1509690665.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:06.284Z,1509690666.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:06.316Z,1509690666.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:31:06.337Z,1509690666.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:06.645Z,1509690666.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:06.690Z,1509690666.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:31:06.691Z,1509690666.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:07.059Z,1509690667.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:07.086Z,1509690667.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:31:07.087Z,1509690667.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:07.437Z,1509690667.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:07.511Z,1509690667.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:31:07.512Z,1509690667.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:07.859Z,1509690667.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:07.910Z,1509690667.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:31:07.911Z,1509690667.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:08.258Z,1509690668.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:08.287Z,1509690668.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:31:08.288Z,1509690668.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:08.690Z,1509690668.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:08.767Z,1509690668.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T06:31:08.768Z,1509690668.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:08.869Z,1509690668.869 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:31:08.996Z,1509690668.996 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:31:08.997Z,1509690668.997 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:31:08.998Z,1509690668.998 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:31:08.999Z,1509690668.999 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:31:09.038Z,1509690669.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:09.114Z,1509690669.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:31:09.116Z,1509690669.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:09.458Z,1509690669.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:09.487Z,1509690669.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:09.835Z,1509690669.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:09.880Z,1509690669.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:10.237Z,1509690670.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:10.280Z,1509690670.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:10.637Z,1509690670.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:10.678Z,1509690670.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:11.075Z,1509690671.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:11.095Z,1509690671.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:11.451Z,1509690671.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:11.495Z,1509690671.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:11.848Z,1509690671.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:11.883Z,1509690671.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:12.241Z,1509690672.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:12.285Z,1509690672.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:12.637Z,1509690672.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:12.681Z,1509690672.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:13.042Z,1509690673.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:13.112Z,1509690673.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:13.449Z,1509690673.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:13.485Z,1509690673.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:13.870Z,1509690673.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:13.926Z,1509690673.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:14.253Z,1509690674.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:14.283Z,1509690674.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:14.653Z,1509690674.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:14.678Z,1509690674.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:15.040Z,1509690675.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:15.079Z,1509690675.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:15.436Z,1509690675.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:15.459Z,1509690675.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:15.866Z,1509690675.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:15.887Z,1509690675.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:16.254Z,1509690676.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:16.280Z,1509690676.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:16.654Z,1509690676.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:16.679Z,1509690676.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:17.041Z,1509690677.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:17.056Z,1509690677.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:17.439Z,1509690677.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:17.459Z,1509690677.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:17.853Z,1509690677.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:17.885Z,1509690677.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:18.253Z,1509690678.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:18.285Z,1509690678.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:18.660Z,1509690678.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:18.690Z,1509690678.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:19.052Z,1509690679.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:19.084Z,1509690679.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:19.443Z,1509690679.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:19.463Z,1509690679.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:19.857Z,1509690679.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:19.903Z,1509690679.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:20.261Z,1509690680.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:20.311Z,1509690680.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:20.653Z,1509690680.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:20.685Z,1509690680.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:21.053Z,1509690681.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:21.127Z,1509690681.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:21.440Z,1509690681.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:21.463Z,1509690681.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:21.853Z,1509690681.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:21.899Z,1509690681.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:22.269Z,1509690682.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:22.311Z,1509690682.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:22.653Z,1509690682.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:22.668Z,1509690682.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:23.059Z,1509690683.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:23.074Z,1509690683.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:23.450Z,1509690683.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:23.464Z,1509690683.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:23.857Z,1509690683.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:23.872Z,1509690683.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:24.257Z,1509690684.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:24.273Z,1509690684.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:24.661Z,1509690684.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:24.676Z,1509690684.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:25.050Z,1509690685.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:25.083Z,1509690685.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:25.444Z,1509690685.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:25.484Z,1509690685.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:25.861Z,1509690685.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:25.876Z,1509690685.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:26.254Z,1509690686.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:26.269Z,1509690686.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:26.657Z,1509690686.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:26.673Z,1509690686.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:27.035Z,1509690687.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:27.078Z,1509690687.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:27.444Z,1509690687.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:27.471Z,1509690687.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:27.857Z,1509690687.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:27.872Z,1509690687.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:28.255Z,1509690688.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:28.269Z,1509690688.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:28.653Z,1509690688.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:28.668Z,1509690688.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:29.062Z,1509690689.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:29.102Z,1509690689.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:29.436Z,1509690689.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:29.451Z,1509690689.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:29.849Z,1509690689.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:29.876Z,1509690689.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:30.249Z,1509690690.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:30.277Z,1509690690.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:30.649Z,1509690690.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:30.677Z,1509690690.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:31.040Z,1509690691.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:31.077Z,1509690691.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:31.451Z,1509690691.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:31.477Z,1509690691.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:31.853Z,1509690691.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:31.880Z,1509690691.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:32.253Z,1509690692.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:32.283Z,1509690692.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:32.649Z,1509690692.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:32.676Z,1509690692.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:33.040Z,1509690693.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:33.055Z,1509690693.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:33.440Z,1509690693.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:33.455Z,1509690693.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:33.850Z,1509690693.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:33.874Z,1509690693.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:34.249Z,1509690694.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:34.331Z,1509690694.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:34.650Z,1509690694.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:34.677Z,1509690694.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:35.041Z,1509690695.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:35.094Z,1509690695.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:35.439Z,1509690695.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:35.454Z,1509690695.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:35.849Z,1509690695.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:35.906Z,1509690695.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:36.253Z,1509690696.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:36.303Z,1509690696.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:36.657Z,1509690696.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:36.683Z,1509690696.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:37.047Z,1509690697.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:37.086Z,1509690697.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:37.440Z,1509690697.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:37.455Z,1509690697.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:37.849Z,1509690697.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:37.864Z,1509690697.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:38.249Z,1509690698.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:38.264Z,1509690698.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:38.653Z,1509690698.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:38.685Z,1509690698.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:39.045Z,1509690699.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:39.060Z,1509690699.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:39.436Z,1509690699.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:39.451Z,1509690699.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:39.853Z,1509690699.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:39.885Z,1509690699.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:40.249Z,1509690700.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:40.263Z,1509690700.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:40.649Z,1509690700.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:40.684Z,1509690700.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:41.044Z,1509690701.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:41.059Z,1509690701.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:41.440Z,1509690701.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:41.454Z,1509690701.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:41.849Z,1509690701.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:41.885Z,1509690701.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:42.257Z,1509690702.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:42.282Z,1509690702.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:42.649Z,1509690702.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:42.684Z,1509690702.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:43.108Z,1509690703.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:43.131Z,1509690703.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:43.437Z,1509690703.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:43.455Z,1509690703.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:43.853Z,1509690703.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:43.883Z,1509690703.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:44.250Z,1509690704.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:44.281Z,1509690704.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:44.650Z,1509690704.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:44.680Z,1509690704.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:45.036Z,1509690705.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:45.052Z,1509690705.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:45.439Z,1509690705.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:45.459Z,1509690705.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:45.850Z,1509690705.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:45.880Z,1509690705.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:46.254Z,1509690706.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:46.279Z,1509690706.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:46.654Z,1509690706.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:46.683Z,1509690706.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:47.036Z,1509690707.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:47.051Z,1509690707.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:47.443Z,1509690707.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:47.459Z,1509690707.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:47.850Z,1509690707.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:47.881Z,1509690707.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:48.253Z,1509690708.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:48.278Z,1509690708.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:48.649Z,1509690708.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:48.733Z,1509690708.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:49.038Z,1509690709.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:49.065Z,1509690709.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:49.444Z,1509690709.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:49.499Z,1509690709.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:49.856Z,1509690709.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:49.871Z,1509690709.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:49.874Z,1509690709.874 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T06:26:49.5Z
2017-11-03T06:31:49.874Z,1509690709.874 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T06:31:49.874Z,1509690709.874 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T06:31:50.253Z,1509690710.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:50.303Z,1509690710.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:50.759Z,1509690710.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:50.856Z,1509690710.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:53.877Z,1509690713.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:53.900Z,1509690713.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:53.997Z,1509690713.997 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T06:31:54.013Z,1509690714.013 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0148.lzma
2017-11-03T06:31:54.052Z,1509690714.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:54.093Z,1509690714.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:54.455Z,1509690714.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:54.489Z,1509690714.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:54.811Z,1509690714.811 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0148.lzma.bak
2017-11-03T06:31:54.811Z,1509690714.811 [DataOverHttps](INFO): SBD MOMSN=5182920
2017-11-03T06:31:54.876Z,1509690714.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:54.928Z,1509690714.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:55.474Z,1509690715.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:55.489Z,1509690715.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:55.636Z,1509690715.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:55.673Z,1509690715.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:58.865Z,1509690718.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:58.882Z,1509690718.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:58.986Z,1509690718.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:59.016Z,1509690719.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:59.424Z,1509690719.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:59.469Z,1509690719.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:31:59.813Z,1509690719.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:31:59.835Z,1509690719.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:00.217Z,1509690720.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:00.239Z,1509690720.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:00.597Z,1509690720.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:00.622Z,1509690720.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:03.879Z,1509690723.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:03.958Z,1509690723.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:03.958Z,1509690723.958 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 126
2017-11-03T06:32:03.958Z,1509690723.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:32:03.960Z,1509690723.960 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:03.960Z,1509690723.960 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 126
2017-11-03T06:32:03.960Z,1509690723.960 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:32:03.966Z,1509690723.966 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:03.966Z,1509690723.966 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 126
2017-11-03T06:32:03.966Z,1509690723.966 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:32:04.063Z,1509690724.063 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:32:04.063Z,1509690724.063 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:32:04.063Z,1509690724.063 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:32:04.091Z,1509690724.091 [DataOverHttps](INFO): Sending 222 bytes from file Logs/20171103T001125/Express0149.lzma
2017-11-03T06:32:04.125Z,1509690724.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:04.216Z,1509690724.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:32:04.217Z,1509690724.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 126
2017-11-03T06:32:04.217Z,1509690724.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:32:04.217Z,1509690724.217 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 126
2017-11-03T06:32:04.218Z,1509690724.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:32:04.218Z,1509690724.218 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 126
2017-11-03T06:32:04.522Z,1509690724.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:04.541Z,1509690724.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:32:04.542Z,1509690724.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:32:04.542Z,1509690724.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:32:04.543Z,1509690724.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:32:04.543Z,1509690724.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:32:04.543Z,1509690724.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:32:04.544Z,1509690724.544 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:32:04.544Z,1509690724.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:32:04.545Z,1509690724.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:32:04.915Z,1509690724.915 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0149.lzma.bak
2017-11-03T06:32:04.915Z,1509690724.915 [DataOverHttps](INFO): SBD MOMSN=5182922
2017-11-03T06:32:04.965Z,1509690724.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:05.033Z,1509690725.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:05.527Z,1509690725.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:05.542Z,1509690725.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:05.545Z,1509690725.545 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T06:32:05.545Z,1509690725.545 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T06:32:05.545Z,1509690725.545 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T06:32:05.708Z,1509690725.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:05.755Z,1509690725.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:08.969Z,1509690728.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:09.033Z,1509690729.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:09.186Z,1509690729.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:09.219Z,1509690729.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:09.594Z,1509690729.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:09.609Z,1509690729.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:09.997Z,1509690729.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:10.019Z,1509690730.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:10.392Z,1509690730.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:10.407Z,1509690730.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:10.783Z,1509690730.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:10.798Z,1509690730.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:11.172Z,1509690731.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:11.199Z,1509690731.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:11.569Z,1509690731.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:11.599Z,1509690731.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:11.994Z,1509690731.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:12.009Z,1509690732.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:12.398Z,1509690732.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:12.419Z,1509690732.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:12.790Z,1509690732.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:12.805Z,1509690732.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:13.183Z,1509690733.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:13.203Z,1509690733.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:13.571Z,1509690733.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:13.599Z,1509690733.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:13.975Z,1509690733.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:14.002Z,1509690734.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:14.373Z,1509690734.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:14.401Z,1509690734.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:14.768Z,1509690734.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:14.800Z,1509690734.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:15.181Z,1509690735.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:15.216Z,1509690735.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:15.593Z,1509690735.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:15.612Z,1509690735.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:15.981Z,1509690735.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:16.015Z,1509690736.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:16.375Z,1509690736.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:16.406Z,1509690736.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:16.818Z,1509690736.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:16.873Z,1509690736.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:17.175Z,1509690737.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:17.206Z,1509690737.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:17.572Z,1509690737.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:17.606Z,1509690737.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:17.998Z,1509690737.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:18.013Z,1509690738.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:18.398Z,1509690738.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:18.418Z,1509690738.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:18.807Z,1509690738.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:18.865Z,1509690738.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:19.172Z,1509690739.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:19.187Z,1509690739.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:19.579Z,1509690739.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:19.594Z,1509690739.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:19.972Z,1509690739.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:19.987Z,1509690739.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:20.373Z,1509690740.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:20.389Z,1509690740.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:20.772Z,1509690740.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:20.938Z,1509690740.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:21.189Z,1509690741.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:21.222Z,1509690741.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:21.589Z,1509690741.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:21.620Z,1509690741.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:21.989Z,1509690741.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:22.038Z,1509690742.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:22.376Z,1509690742.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:22.391Z,1509690742.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:22.776Z,1509690742.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:22.873Z,1509690742.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:23.181Z,1509690743.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:23.196Z,1509690743.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:23.576Z,1509690743.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:23.627Z,1509690743.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:23.986Z,1509690743.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:24.007Z,1509690744.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:24.393Z,1509690744.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:24.408Z,1509690744.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:24.794Z,1509690744.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:24.826Z,1509690744.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:25.177Z,1509690745.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:25.199Z,1509690745.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:25.579Z,1509690745.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:25.595Z,1509690745.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:25.980Z,1509690745.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:25.995Z,1509690745.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:26.380Z,1509690746.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:26.399Z,1509690746.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:26.780Z,1509690746.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:26.794Z,1509690746.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:27.194Z,1509690747.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:27.225Z,1509690747.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:27.585Z,1509690747.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:27.600Z,1509690747.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:27.989Z,1509690747.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:28.011Z,1509690748.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:28.382Z,1509690748.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:28.397Z,1509690748.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:28.782Z,1509690748.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:28.797Z,1509690748.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:29.183Z,1509690749.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:29.198Z,1509690749.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:29.579Z,1509690749.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:29.594Z,1509690749.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:29.985Z,1509690749.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:30.001Z,1509690750.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:30.389Z,1509690750.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:30.404Z,1509690750.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:30.802Z,1509690750.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:30.851Z,1509690750.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:31.180Z,1509690751.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:31.195Z,1509690751.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:31.582Z,1509690751.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:31.597Z,1509690751.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:31.981Z,1509690751.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:31.996Z,1509690751.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:32.379Z,1509690752.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:32.399Z,1509690752.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:32.809Z,1509690752.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:32.846Z,1509690752.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:33.188Z,1509690753.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:33.204Z,1509690753.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:33.588Z,1509690753.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:33.603Z,1509690753.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:33.989Z,1509690753.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:34.010Z,1509690754.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:34.380Z,1509690754.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:34.396Z,1509690754.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:34.808Z,1509690754.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:34.896Z,1509690754.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:35.181Z,1509690755.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:35.199Z,1509690755.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:35.584Z,1509690755.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:35.650Z,1509690755.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:35.993Z,1509690755.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:36.059Z,1509690756.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:36.393Z,1509690756.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:36.407Z,1509690756.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:36.793Z,1509690756.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:36.809Z,1509690756.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:37.171Z,1509690757.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:37.234Z,1509690757.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:37.568Z,1509690757.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:37.595Z,1509690757.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:37.984Z,1509690757.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:38.040Z,1509690758.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:38.381Z,1509690758.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:38.397Z,1509690758.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:38.768Z,1509690758.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:38.819Z,1509690758.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:39.189Z,1509690759.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:39.224Z,1509690759.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:39.593Z,1509690759.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:39.615Z,1509690759.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:39.996Z,1509690759.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:40.018Z,1509690760.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:40.380Z,1509690760.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:40.402Z,1509690760.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:40.780Z,1509690760.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:40.805Z,1509690760.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:41.168Z,1509690761.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:41.194Z,1509690761.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:41.571Z,1509690761.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:41.597Z,1509690761.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:41.993Z,1509690761.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:42.008Z,1509690762.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:42.396Z,1509690762.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:42.411Z,1509690762.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:42.793Z,1509690762.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:42.808Z,1509690762.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:43.180Z,1509690763.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:43.206Z,1509690763.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:43.571Z,1509690763.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:43.605Z,1509690763.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:43.983Z,1509690763.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:43.999Z,1509690763.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:44.382Z,1509690764.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:44.397Z,1509690764.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:44.797Z,1509690764.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:44.857Z,1509690764.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:45.196Z,1509690765.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:45.219Z,1509690765.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:45.593Z,1509690765.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:45.608Z,1509690765.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:45.996Z,1509690765.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:46.018Z,1509690766.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:46.381Z,1509690766.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:46.402Z,1509690766.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:46.798Z,1509690766.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:46.851Z,1509690766.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:47.176Z,1509690767.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:47.191Z,1509690767.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:47.575Z,1509690767.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:47.591Z,1509690767.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:47.989Z,1509690767.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:48.020Z,1509690768.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:48.393Z,1509690768.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:48.426Z,1509690768.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:48.814Z,1509690768.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:48.872Z,1509690768.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:49.177Z,1509690769.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:49.192Z,1509690769.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:49.576Z,1509690769.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:49.591Z,1509690769.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:49.976Z,1509690769.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:49.995Z,1509690769.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:50.381Z,1509690770.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:50.396Z,1509690770.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:50.777Z,1509690770.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:50.926Z,1509690770.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:51.186Z,1509690771.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:51.202Z,1509690771.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:51.586Z,1509690771.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:51.642Z,1509690771.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:51.985Z,1509690771.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:51.000Z,1509690772.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:52.375Z,1509690772.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:52.423Z,1509690772.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:52.780Z,1509690772.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:52.832Z,1509690772.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:53.179Z,1509690773.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:53.199Z,1509690773.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:53.582Z,1509690773.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:53.597Z,1509690773.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:53.985Z,1509690773.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:54.001Z,1509690774.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:54.385Z,1509690774.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:54.401Z,1509690774.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:54.786Z,1509690774.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:54.801Z,1509690774.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:55.182Z,1509690775.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:55.197Z,1509690775.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:55.580Z,1509690775.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:55.595Z,1509690775.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:55.980Z,1509690775.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:55.995Z,1509690775.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:56.382Z,1509690776.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:56.399Z,1509690776.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:56.782Z,1509690776.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:56.797Z,1509690776.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:57.184Z,1509690777.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:57.200Z,1509690777.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:57.602Z,1509690777.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:57.624Z,1509690777.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:57.985Z,1509690777.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:57.000Z,1509690778.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:58.382Z,1509690778.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:58.397Z,1509690778.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:58.791Z,1509690778.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:58.840Z,1509690778.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:59.184Z,1509690779.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:59.199Z,1509690779.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:59.583Z,1509690779.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:32:59.599Z,1509690779.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:32:59.992Z,1509690779.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:00.015Z,1509690780.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:00.393Z,1509690780.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:00.407Z,1509690780.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:00.812Z,1509690780.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:00.865Z,1509690780.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:01.182Z,1509690781.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:01.198Z,1509690781.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:01.581Z,1509690781.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:01.602Z,1509690781.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:01.983Z,1509690781.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:01.999Z,1509690781.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:02.384Z,1509690782.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:02.400Z,1509690782.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:02.827Z,1509690782.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:02.895Z,1509690782.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:03.190Z,1509690783.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:03.220Z,1509690783.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:03.590Z,1509690783.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:03.619Z,1509690783.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:03.990Z,1509690783.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:04.019Z,1509690784.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:04.376Z,1509690784.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:04.391Z,1509690784.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:04.776Z,1509690784.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:04.893Z,1509690784.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:04.934Z,1509690784.934 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:33:04.934Z,1509690784.934 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T06:33:04.934Z,1509690784.934 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:33:04.985Z,1509690784.985 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:33:04.985Z,1509690784.985 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T06:33:05.179Z,1509690785.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:05.215Z,1509690785.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.3 s old, using for 20.0 s.
2017-11-03T06:33:05.216Z,1509690785.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:05.336Z,1509690785.336 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:33:05.424Z,1509690785.424 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:33:05.582Z,1509690785.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:05.599Z,1509690785.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.7 s old, using for 20.0 s.
2017-11-03T06:33:05.600Z,1509690785.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:05.998Z,1509690785.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:06.050Z,1509690786.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:33:06.051Z,1509690786.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:09.083Z,1509690789.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:09.098Z,1509690789.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T06:33:09.099Z,1509690789.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:09.250Z,1509690789.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:09.306Z,1509690789.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:33:09.307Z,1509690789.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:09.638Z,1509690789.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:09.698Z,1509690789.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:33:09.699Z,1509690789.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:10.037Z,1509690790.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:10.056Z,1509690790.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:33:10.057Z,1509690790.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:10.442Z,1509690790.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:10.458Z,1509690790.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:33:10.459Z,1509690790.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:10.848Z,1509690790.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:10.890Z,1509690790.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:33:10.891Z,1509690790.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:11.249Z,1509690791.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:11.267Z,1509690791.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:33:11.268Z,1509690791.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:11.650Z,1509690791.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:11.667Z,1509690791.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:33:11.668Z,1509690791.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:12.038Z,1509690792.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:12.058Z,1509690792.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:33:12.059Z,1509690792.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:12.435Z,1509690792.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:12.470Z,1509690792.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:33:12.471Z,1509690792.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:12.845Z,1509690792.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:12.863Z,1509690792.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:33:12.864Z,1509690792.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:13.250Z,1509690793.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:13.270Z,1509690793.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:33:13.271Z,1509690793.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:13.651Z,1509690793.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:13.670Z,1509690793.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:33:13.671Z,1509690793.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:14.039Z,1509690794.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:14.072Z,1509690794.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:33:14.087Z,1509690794.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:14.436Z,1509690794.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:14.461Z,1509690794.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:33:14.462Z,1509690794.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:14.847Z,1509690794.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:14.862Z,1509690794.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:33:14.863Z,1509690794.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:15.247Z,1509690795.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:15.261Z,1509690795.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:33:15.262Z,1509690795.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:15.648Z,1509690795.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:15.690Z,1509690795.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:33:15.691Z,1509690795.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:16.040Z,1509690796.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:16.058Z,1509690796.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:33:16.060Z,1509690796.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:16.439Z,1509690796.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:16.457Z,1509690796.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:33:16.458Z,1509690796.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:16.851Z,1509690796.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:16.870Z,1509690796.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:33:16.871Z,1509690796.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:17.249Z,1509690797.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:17.288Z,1509690797.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:33:17.289Z,1509690797.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:17.648Z,1509690797.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:17.666Z,1509690797.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:33:17.667Z,1509690797.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:18.040Z,1509690798.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:18.058Z,1509690798.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:33:18.059Z,1509690798.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:18.440Z,1509690798.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:18.454Z,1509690798.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:33:18.455Z,1509690798.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:18.848Z,1509690798.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:18.888Z,1509690798.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T06:33:18.889Z,1509690798.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:19.248Z,1509690799.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:19.266Z,1509690799.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:33:19.267Z,1509690799.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:19.651Z,1509690799.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:19.670Z,1509690799.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T06:33:19.671Z,1509690799.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:20.038Z,1509690800.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:20.062Z,1509690800.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:33:20.063Z,1509690800.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:20.432Z,1509690800.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:20.475Z,1509690800.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T06:33:20.475Z,1509690800.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:20.857Z,1509690800.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:20.872Z,1509690800.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T06:33:20.873Z,1509690800.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:21.258Z,1509690801.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:21.273Z,1509690801.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T06:33:21.274Z,1509690801.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:21.653Z,1509690801.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:21.729Z,1509690801.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T06:33:21.730Z,1509690801.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:22.031Z,1509690802.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:22.067Z,1509690802.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T06:33:22.068Z,1509690802.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:22.424Z,1509690802.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:22.478Z,1509690802.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T06:33:22.479Z,1509690802.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:22.842Z,1509690802.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:22.878Z,1509690802.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T06:33:22.879Z,1509690802.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:23.239Z,1509690803.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:23.291Z,1509690803.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T06:33:23.292Z,1509690803.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:23.637Z,1509690803.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:23.702Z,1509690803.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T06:33:23.703Z,1509690803.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:24.029Z,1509690804.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:24.044Z,1509690804.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T06:33:24.061Z,1509690804.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:24.428Z,1509690804.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:24.445Z,1509690804.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T06:33:24.447Z,1509690804.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:24.843Z,1509690804.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:24.871Z,1509690804.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T06:33:24.872Z,1509690804.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:25.241Z,1509690805.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:25.275Z,1509690805.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:25.641Z,1509690805.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:25.674Z,1509690805.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:26.029Z,1509690806.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:26.047Z,1509690806.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:26.428Z,1509690806.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:26.446Z,1509690806.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:26.841Z,1509690806.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:26.856Z,1509690806.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:27.245Z,1509690807.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:27.279Z,1509690807.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:27.647Z,1509690807.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:27.682Z,1509690807.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:28.034Z,1509690808.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:28.050Z,1509690808.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:28.431Z,1509690808.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:28.475Z,1509690808.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:28.850Z,1509690808.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:28.877Z,1509690808.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:29.247Z,1509690809.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:29.280Z,1509690809.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:29.640Z,1509690809.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:29.655Z,1509690809.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:30.033Z,1509690810.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:30.077Z,1509690810.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:30.432Z,1509690810.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:30.447Z,1509690810.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:30.848Z,1509690810.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:30.880Z,1509690810.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:31.242Z,1509690811.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:31.257Z,1509690811.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:31.649Z,1509690811.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:31.686Z,1509690811.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:32.038Z,1509690812.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:32.056Z,1509690812.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:32.435Z,1509690812.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:32.454Z,1509690812.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:32.851Z,1509690812.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:32.882Z,1509690812.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:33.238Z,1509690813.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:33.278Z,1509690813.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:33.641Z,1509690813.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:33.661Z,1509690813.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:34.036Z,1509690814.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:34.055Z,1509690814.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:34.439Z,1509690814.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:34.459Z,1509690814.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:34.850Z,1509690814.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:34.886Z,1509690814.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:35.250Z,1509690815.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:35.284Z,1509690815.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:35.652Z,1509690815.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:35.742Z,1509690815.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:36.038Z,1509690816.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:36.055Z,1509690816.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:36.438Z,1509690816.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:36.498Z,1509690816.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:36.842Z,1509690816.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:36.862Z,1509690816.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:37.247Z,1509690817.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:37.299Z,1509690817.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:37.647Z,1509690817.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:37.691Z,1509690817.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:38.039Z,1509690818.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:38.080Z,1509690818.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:38.436Z,1509690818.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:38.452Z,1509690818.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:38.847Z,1509690818.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:38.863Z,1509690818.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:39.247Z,1509690819.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:39.283Z,1509690819.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:39.641Z,1509690819.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:39.682Z,1509690819.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:40.039Z,1509690820.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:40.057Z,1509690820.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:40.438Z,1509690820.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:40.457Z,1509690820.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:40.843Z,1509690820.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:40.858Z,1509690820.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:41.240Z,1509690821.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:41.278Z,1509690821.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:41.640Z,1509690821.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:41.659Z,1509690821.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:42.038Z,1509690822.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:42.057Z,1509690822.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:42.434Z,1509690822.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:42.450Z,1509690822.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:42.840Z,1509690822.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:42.882Z,1509690822.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:43.241Z,1509690823.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:43.260Z,1509690823.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:43.647Z,1509690823.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:43.663Z,1509690823.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:44.041Z,1509690824.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:44.056Z,1509690824.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:44.436Z,1509690824.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:44.474Z,1509690824.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:44.841Z,1509690824.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:44.864Z,1509690824.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:45.241Z,1509690825.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:45.259Z,1509690825.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:45.642Z,1509690825.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:45.662Z,1509690825.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:46.040Z,1509690826.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:46.078Z,1509690826.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:46.433Z,1509690826.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:46.448Z,1509690826.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:46.843Z,1509690826.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:46.860Z,1509690826.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:47.248Z,1509690827.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:47.262Z,1509690827.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:47.642Z,1509690827.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:47.678Z,1509690827.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:48.036Z,1509690828.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:48.054Z,1509690828.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:48.438Z,1509690828.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:48.457Z,1509690828.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:48.844Z,1509690828.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:48.860Z,1509690828.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:49.245Z,1509690829.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:49.278Z,1509690829.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:49.641Z,1509690829.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:49.703Z,1509690829.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:50.039Z,1509690830.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:50.102Z,1509690830.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:50.440Z,1509690830.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:50.455Z,1509690830.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:50.845Z,1509690830.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:50.884Z,1509690830.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:51.240Z,1509690831.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:51.295Z,1509690831.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:51.642Z,1509690831.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:51.659Z,1509690831.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:52.039Z,1509690832.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:52.090Z,1509690832.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:52.438Z,1509690832.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:52.495Z,1509690832.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:52.841Z,1509690832.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:52.860Z,1509690832.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:53.242Z,1509690833.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:53.259Z,1509690833.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:53.642Z,1509690833.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:53.657Z,1509690833.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:54.038Z,1509690834.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:54.081Z,1509690834.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:54.437Z,1509690834.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:54.454Z,1509690834.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:54.841Z,1509690834.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:54.859Z,1509690834.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:55.247Z,1509690835.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:55.266Z,1509690835.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:55.641Z,1509690835.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:55.680Z,1509690835.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:56.039Z,1509690836.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:56.061Z,1509690836.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:56.437Z,1509690836.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:56.456Z,1509690836.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:56.843Z,1509690836.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:56.866Z,1509690836.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:57.240Z,1509690837.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:57.281Z,1509690837.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:57.641Z,1509690837.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:57.663Z,1509690837.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:58.038Z,1509690838.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:58.057Z,1509690838.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:58.441Z,1509690838.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:58.456Z,1509690838.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:58.842Z,1509690838.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:58.881Z,1509690838.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:59.242Z,1509690839.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:59.261Z,1509690839.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:33:59.644Z,1509690839.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:33:59.661Z,1509690839.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:00.038Z,1509690840.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:00.054Z,1509690840.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:00.438Z,1509690840.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:00.481Z,1509690840.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:00.840Z,1509690840.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:00.860Z,1509690840.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:01.241Z,1509690841.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:01.259Z,1509690841.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:01.643Z,1509690841.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:01.663Z,1509690841.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:02.039Z,1509690842.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:02.080Z,1509690842.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:02.436Z,1509690842.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:02.452Z,1509690842.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:02.842Z,1509690842.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:02.859Z,1509690842.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:03.247Z,1509690843.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:03.267Z,1509690843.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:03.639Z,1509690843.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:03.667Z,1509690843.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:04.040Z,1509690844.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:04.058Z,1509690844.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:04.438Z,1509690844.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:04.507Z,1509690844.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:04.853Z,1509690844.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:04.911Z,1509690844.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:05.250Z,1509690845.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:05.287Z,1509690845.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:05.645Z,1509690845.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:05.664Z,1509690845.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:06.039Z,1509690846.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:06.098Z,1509690846.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:09.128Z,1509690849.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:09.151Z,1509690849.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:09.305Z,1509690849.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:09.351Z,1509690849.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:09.697Z,1509690849.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:09.755Z,1509690849.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:10.101Z,1509690850.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:10.117Z,1509690850.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:10.475Z,1509690850.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:10.508Z,1509690850.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:10.876Z,1509690850.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:10.901Z,1509690850.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:11.286Z,1509690851.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:11.302Z,1509690851.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:11.688Z,1509690851.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:11.704Z,1509690851.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:12.097Z,1509690852.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:12.112Z,1509690852.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:12.498Z,1509690852.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:12.513Z,1509690852.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:12.897Z,1509690852.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:12.912Z,1509690852.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:13.290Z,1509690853.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:13.310Z,1509690853.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:13.687Z,1509690853.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:13.702Z,1509690853.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:14.086Z,1509690854.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:14.107Z,1509690854.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:14.476Z,1509690854.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:14.506Z,1509690854.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:14.895Z,1509690854.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:14.915Z,1509690854.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:15.297Z,1509690855.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:15.312Z,1509690855.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:15.698Z,1509690855.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:15.712Z,1509690855.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:16.088Z,1509690856.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:16.103Z,1509690856.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:16.487Z,1509690856.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:16.506Z,1509690856.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:16.887Z,1509690856.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:16.902Z,1509690856.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:17.287Z,1509690857.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:17.303Z,1509690857.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:17.687Z,1509690857.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:17.707Z,1509690857.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:18.101Z,1509690858.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:18.115Z,1509690858.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:18.501Z,1509690858.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:18.517Z,1509690858.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:18.897Z,1509690858.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:18.919Z,1509690858.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:19.284Z,1509690859.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:19.307Z,1509690859.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:19.690Z,1509690859.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:19.711Z,1509690859.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:20.087Z,1509690860.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:20.103Z,1509690860.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:20.485Z,1509690860.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:20.506Z,1509690860.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:20.901Z,1509690860.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:20.916Z,1509690860.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:21.297Z,1509690861.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:21.312Z,1509690861.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:21.697Z,1509690861.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:21.758Z,1509690861.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:22.076Z,1509690862.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:22.124Z,1509690862.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:22.476Z,1509690862.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:22.511Z,1509690862.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:22.879Z,1509690862.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:22.923Z,1509690862.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:23.276Z,1509690863.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:23.310Z,1509690863.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:23.676Z,1509690863.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:23.734Z,1509690863.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:24.098Z,1509690864.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:24.150Z,1509690864.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:24.485Z,1509690864.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:24.511Z,1509690864.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:24.898Z,1509690864.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:24.913Z,1509690864.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:25.276Z,1509690865.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:25.309Z,1509690865.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:25.672Z,1509690865.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:25.687Z,1509690865.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:26.079Z,1509690866.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:26.111Z,1509690866.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:26.475Z,1509690866.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:26.502Z,1509690866.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:26.889Z,1509690866.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:26.915Z,1509690866.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:27.289Z,1509690867.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:27.315Z,1509690867.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:27.701Z,1509690867.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:27.716Z,1509690867.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:28.075Z,1509690868.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:28.090Z,1509690868.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:28.477Z,1509690868.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:28.492Z,1509690868.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:28.877Z,1509690868.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:28.892Z,1509690868.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:29.280Z,1509690869.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:29.318Z,1509690869.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:29.682Z,1509690869.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:29.709Z,1509690869.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:30.090Z,1509690870.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:30.119Z,1509690870.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:30.489Z,1509690870.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:30.515Z,1509690870.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:30.893Z,1509690870.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:30.923Z,1509690870.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:31.282Z,1509690871.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:31.309Z,1509690871.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:31.676Z,1509690871.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:31.691Z,1509690871.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:32.080Z,1509690872.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:32.095Z,1509690872.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:32.483Z,1509690872.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:32.523Z,1509690872.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:32.889Z,1509690872.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:32.924Z,1509690872.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:33.294Z,1509690873.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:33.318Z,1509690873.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:33.694Z,1509690873.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:33.718Z,1509690873.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:34.084Z,1509690874.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:34.121Z,1509690874.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:34.480Z,1509690874.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:34.495Z,1509690874.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:34.883Z,1509690874.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:34.922Z,1509690874.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:35.283Z,1509690875.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:35.323Z,1509690875.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:35.684Z,1509690875.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:35.699Z,1509690875.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:36.093Z,1509690876.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:36.205Z,1509690876.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:36.497Z,1509690876.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:36.512Z,1509690876.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:36.889Z,1509690876.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:36.935Z,1509690876.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:37.287Z,1509690877.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:37.302Z,1509690877.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:37.683Z,1509690877.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:37.729Z,1509690877.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:38.084Z,1509690878.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:38.135Z,1509690878.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:38.482Z,1509690878.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:38.501Z,1509690878.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:38.900Z,1509690878.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:38.931Z,1509690878.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:39.298Z,1509690879.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:39.333Z,1509690879.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:39.697Z,1509690879.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:39.729Z,1509690879.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:40.085Z,1509690880.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:40.099Z,1509690880.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:40.488Z,1509690880.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:40.503Z,1509690880.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:40.885Z,1509690880.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:40.899Z,1509690880.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:41.285Z,1509690881.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:41.299Z,1509690881.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:41.685Z,1509690881.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:41.699Z,1509690881.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:42.097Z,1509690882.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:42.129Z,1509690882.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:42.490Z,1509690882.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:42.505Z,1509690882.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:42.890Z,1509690882.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:42.905Z,1509690882.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:43.283Z,1509690883.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:43.299Z,1509690883.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:43.679Z,1509690883.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:43.707Z,1509690883.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:44.087Z,1509690884.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:44.103Z,1509690884.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:44.480Z,1509690884.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:44.495Z,1509690884.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:44.892Z,1509690884.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:44.907Z,1509690884.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:45.292Z,1509690885.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:45.307Z,1509690885.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:45.692Z,1509690885.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:45.707Z,1509690885.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:46.088Z,1509690886.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:46.110Z,1509690886.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:46.484Z,1509690886.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:46.507Z,1509690886.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:46.887Z,1509690886.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:46.902Z,1509690886.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:47.287Z,1509690887.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:47.307Z,1509690887.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:47.687Z,1509690887.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:47.707Z,1509690887.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:48.092Z,1509690888.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:48.108Z,1509690888.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:48.493Z,1509690888.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:48.509Z,1509690888.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:48.892Z,1509690888.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:48.907Z,1509690888.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:49.284Z,1509690889.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:49.303Z,1509690889.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:49.685Z,1509690889.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:49.700Z,1509690889.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:50.090Z,1509690890.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:50.151Z,1509690890.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:50.478Z,1509690890.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:50.503Z,1509690890.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:50.897Z,1509690890.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:50.943Z,1509690890.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:51.301Z,1509690891.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:51.323Z,1509690891.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:51.696Z,1509690891.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:51.751Z,1509690891.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:52.079Z,1509690892.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:52.142Z,1509690892.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:52.479Z,1509690892.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:52.505Z,1509690892.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:52.876Z,1509690892.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:52.902Z,1509690892.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:53.280Z,1509690893.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:53.306Z,1509690893.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:53.679Z,1509690893.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:53.705Z,1509690893.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:54.097Z,1509690894.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:54.113Z,1509690894.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:54.502Z,1509690894.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:54.518Z,1509690894.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:54.894Z,1509690894.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:54.909Z,1509690894.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:55.278Z,1509690895.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:55.305Z,1509690895.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:55.680Z,1509690895.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:55.706Z,1509690895.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:56.090Z,1509690896.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:56.105Z,1509690896.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:56.491Z,1509690896.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:56.511Z,1509690896.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:56.896Z,1509690896.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:56.911Z,1509690896.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:57.302Z,1509690897.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:57.323Z,1509690897.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:57.698Z,1509690897.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:57.713Z,1509690897.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:58.074Z,1509690898.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:58.103Z,1509690898.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:58.475Z,1509690898.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:58.500Z,1509690898.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:58.876Z,1509690898.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:58.902Z,1509690898.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:59.279Z,1509690899.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:59.306Z,1509690899.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:34:59.680Z,1509690899.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:34:59.706Z,1509690899.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:00.097Z,1509690900.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:00.113Z,1509690900.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:00.501Z,1509690900.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:00.524Z,1509690900.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:00.897Z,1509690900.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:00.919Z,1509690900.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:01.279Z,1509690901.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:01.306Z,1509690901.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:01.679Z,1509690901.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:01.705Z,1509690901.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:02.080Z,1509690902.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:02.105Z,1509690902.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:02.476Z,1509690902.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:02.502Z,1509690902.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:02.902Z,1509690902.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:02.923Z,1509690902.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:03.301Z,1509690903.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:03.323Z,1509690903.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:03.698Z,1509690903.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:03.713Z,1509690903.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:04.079Z,1509690904.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:04.175Z,1509690904.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:04.474Z,1509690904.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:04.515Z,1509690904.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:04.882Z,1509690904.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:04.913Z,1509690904.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:04.913Z,1509690904.913 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 127
2017-11-03T06:35:04.913Z,1509690904.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:35:04.915Z,1509690904.915 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:04.915Z,1509690904.915 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 127
2017-11-03T06:35:04.915Z,1509690904.915 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:35:04.918Z,1509690904.918 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:04.918Z,1509690904.918 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 127
2017-11-03T06:35:04.918Z,1509690904.918 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:35:05.001Z,1509690905.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:35:05.001Z,1509690905.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:35:05.001Z,1509690905.001 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:35:05.280Z,1509690905.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:05.405Z,1509690905.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:35:05.405Z,1509690905.405 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 127
2017-11-03T06:35:05.405Z,1509690905.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:35:05.405Z,1509690905.405 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 127
2017-11-03T06:35:05.406Z,1509690905.406 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:35:05.406Z,1509690905.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 127
2017-11-03T06:35:05.683Z,1509690905.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:05.717Z,1509690905.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:35:05.718Z,1509690905.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:35:05.718Z,1509690905.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:35:05.719Z,1509690905.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:35:05.719Z,1509690905.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:35:05.719Z,1509690905.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:35:05.720Z,1509690905.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:35:05.724Z,1509690905.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:35:05.725Z,1509690905.725 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:35:06.097Z,1509690906.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:06.166Z,1509690906.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-03T06:35:06.167Z,1509690906.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:09.226Z,1509690909.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:09.273Z,1509690909.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:35:09.274Z,1509690909.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:09.426Z,1509690909.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:09.441Z,1509690909.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T06:35:09.442Z,1509690909.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:09.811Z,1509690909.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:09.826Z,1509690909.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T06:35:09.827Z,1509690909.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:10.216Z,1509690910.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:10.230Z,1509690910.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T06:35:10.231Z,1509690910.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:10.610Z,1509690910.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:10.630Z,1509690910.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T06:35:10.631Z,1509690910.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:11.021Z,1509690911.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:11.036Z,1509690911.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T06:35:11.037Z,1509690911.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:11.424Z,1509690911.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:11.438Z,1509690911.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T06:35:11.439Z,1509690911.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:11.817Z,1509690911.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:11.832Z,1509690911.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T06:35:11.833Z,1509690911.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:12.220Z,1509690912.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:12.242Z,1509690912.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T06:35:12.243Z,1509690912.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:12.611Z,1509690912.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:12.625Z,1509690912.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T06:35:12.626Z,1509690912.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:12.997Z,1509690912.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:13.023Z,1509690913.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T06:35:13.024Z,1509690913.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:13.410Z,1509690913.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:13.430Z,1509690913.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T06:35:13.431Z,1509690913.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:13.824Z,1509690913.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:13.839Z,1509690913.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T06:35:13.840Z,1509690913.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:14.217Z,1509690914.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:14.232Z,1509690914.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T06:35:14.233Z,1509690914.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:14.621Z,1509690914.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:14.636Z,1509690914.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T06:35:14.637Z,1509690914.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:15.003Z,1509690915.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:15.029Z,1509690915.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T06:35:15.030Z,1509690915.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:15.396Z,1509690915.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:15.427Z,1509690915.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T06:35:15.428Z,1509690915.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:15.822Z,1509690915.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:15.836Z,1509690915.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T06:35:15.837Z,1509690915.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:16.226Z,1509690916.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:16.241Z,1509690916.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T06:35:16.241Z,1509690916.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:16.622Z,1509690916.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:16.636Z,1509690916.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T06:35:16.637Z,1509690916.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:17.002Z,1509690917.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:17.028Z,1509690917.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T06:35:17.029Z,1509690917.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:17.403Z,1509690917.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:17.430Z,1509690917.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T06:35:17.431Z,1509690917.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:17.825Z,1509690917.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:17.840Z,1509690917.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T06:35:17.841Z,1509690917.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:18.222Z,1509690918.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:18.237Z,1509690918.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T06:35:18.238Z,1509690918.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:18.626Z,1509690918.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:18.640Z,1509690918.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T06:35:18.641Z,1509690918.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:19.014Z,1509690919.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:19.028Z,1509690919.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T06:35:19.029Z,1509690919.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:19.400Z,1509690919.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:19.426Z,1509690919.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T06:35:19.427Z,1509690919.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:19.830Z,1509690919.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:19.844Z,1509690919.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T06:35:19.845Z,1509690919.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:20.224Z,1509690920.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:20.246Z,1509690920.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T06:35:20.247Z,1509690920.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:20.622Z,1509690920.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:20.636Z,1509690920.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T06:35:20.637Z,1509690920.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:21.004Z,1509690921.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:21.036Z,1509690921.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T06:35:21.037Z,1509690921.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:21.403Z,1509690921.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:21.481Z,1509690921.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T06:35:21.482Z,1509690921.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:21.814Z,1509690921.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:21.829Z,1509690921.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T06:35:21.830Z,1509690921.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:22.217Z,1509690922.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:22.254Z,1509690922.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T06:35:22.255Z,1509690922.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:22.614Z,1509690922.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:22.628Z,1509690922.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T06:35:22.629Z,1509690922.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:23.009Z,1509690923.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:23.058Z,1509690923.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T06:35:23.059Z,1509690923.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:23.410Z,1509690923.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:23.452Z,1509690923.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T06:35:23.453Z,1509690923.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:23.818Z,1509690923.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:23.833Z,1509690923.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T06:35:23.834Z,1509690923.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:24.217Z,1509690924.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:24.232Z,1509690924.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T06:35:24.233Z,1509690924.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:24.617Z,1509690924.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:24.653Z,1509690924.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T06:35:24.654Z,1509690924.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:25.011Z,1509690925.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:25.031Z,1509690925.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:25.408Z,1509690925.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:25.423Z,1509690925.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:25.829Z,1509690925.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:25.853Z,1509690925.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:26.212Z,1509690926.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:26.235Z,1509690926.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:26.614Z,1509690926.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:26.629Z,1509690926.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:27.011Z,1509690927.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:27.026Z,1509690927.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:27.410Z,1509690927.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:27.425Z,1509690927.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:27.814Z,1509690927.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:27.829Z,1509690927.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:28.217Z,1509690928.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:28.231Z,1509690928.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:28.612Z,1509690928.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:28.635Z,1509690928.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:29.009Z,1509690929.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:29.031Z,1509690929.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:29.410Z,1509690929.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:29.425Z,1509690929.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:29.817Z,1509690929.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:29.833Z,1509690929.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:30.214Z,1509690930.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:30.229Z,1509690930.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:30.613Z,1509690930.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:30.634Z,1509690930.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:31.010Z,1509690931.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:31.025Z,1509690931.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:31.409Z,1509690931.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:31.424Z,1509690931.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:31.825Z,1509690931.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:31.854Z,1509690931.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:32.214Z,1509690932.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:32.229Z,1509690932.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:32.614Z,1509690932.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:32.629Z,1509690932.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:33.005Z,1509690933.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:33.059Z,1509690933.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:33.401Z,1509690933.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:33.416Z,1509690933.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:33.818Z,1509690933.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:33.849Z,1509690933.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:34.220Z,1509690934.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:34.254Z,1509690934.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:34.618Z,1509690934.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:34.649Z,1509690934.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:35.000Z,1509690935.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:35.019Z,1509690935.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:35.407Z,1509690935.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:35.492Z,1509690935.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:35.823Z,1509690935.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:35.850Z,1509690935.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:36.214Z,1509690936.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:36.230Z,1509690936.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:36.621Z,1509690936.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:36.670Z,1509690936.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:37.008Z,1509690937.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:37.023Z,1509690937.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:37.406Z,1509690937.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:37.455Z,1509690937.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:37.863Z,1509690937.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:37.911Z,1509690937.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:38.209Z,1509690938.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:38.225Z,1509690938.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:38.622Z,1509690938.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:38.652Z,1509690938.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:39.008Z,1509690939.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:39.026Z,1509690939.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:39.409Z,1509690939.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:39.424Z,1509690939.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:39.814Z,1509690939.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:39.829Z,1509690939.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:40.220Z,1509690940.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:40.252Z,1509690940.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:40.610Z,1509690940.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:40.631Z,1509690940.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:41.008Z,1509690941.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:41.023Z,1509690941.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:41.407Z,1509690941.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:41.421Z,1509690941.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:41.822Z,1509690941.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:41.851Z,1509690941.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:42.214Z,1509690942.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:42.229Z,1509690942.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:42.613Z,1509690942.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:42.649Z,1509690942.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:43.006Z,1509690943.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:43.021Z,1509690943.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:43.408Z,1509690943.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:43.423Z,1509690943.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:43.814Z,1509690943.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:43.829Z,1509690943.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:44.210Z,1509690944.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:44.225Z,1509690944.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:44.622Z,1509690944.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:44.651Z,1509690944.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:45.008Z,1509690945.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:45.023Z,1509690945.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:45.409Z,1509690945.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:45.425Z,1509690945.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:45.822Z,1509690945.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:45.851Z,1509690945.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:46.222Z,1509690946.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:46.251Z,1509690946.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:46.623Z,1509690946.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:46.651Z,1509690946.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:47.008Z,1509690947.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:47.024Z,1509690947.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:47.407Z,1509690947.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:47.423Z,1509690947.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:47.823Z,1509690947.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:47.851Z,1509690947.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:48.213Z,1509690948.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:48.229Z,1509690948.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:48.621Z,1509690948.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:48.651Z,1509690948.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:49.004Z,1509690949.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:49.020Z,1509690949.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:49.408Z,1509690949.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:49.460Z,1509690949.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:49.809Z,1509690949.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:49.863Z,1509690949.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:50.212Z,1509690950.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:50.234Z,1509690950.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:50.617Z,1509690950.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:50.655Z,1509690950.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:51.017Z,1509690951.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:51.032Z,1509690951.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:51.404Z,1509690951.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:51.462Z,1509690951.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:51.809Z,1509690951.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:51.852Z,1509690951.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:52.205Z,1509690952.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:52.220Z,1509690952.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:52.610Z,1509690952.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:52.625Z,1509690952.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:53.012Z,1509690953.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:53.027Z,1509690953.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:53.413Z,1509690953.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:53.427Z,1509690953.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:53.818Z,1509690953.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:53.833Z,1509690953.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:54.209Z,1509690954.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:54.224Z,1509690954.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:54.605Z,1509690954.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:54.620Z,1509690954.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:55.011Z,1509690955.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:55.031Z,1509690955.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:55.409Z,1509690955.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:55.425Z,1509690955.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:55.813Z,1509690955.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:55.827Z,1509690955.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:56.217Z,1509690956.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:56.232Z,1509690956.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:56.613Z,1509690956.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:56.634Z,1509690956.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:57.009Z,1509690957.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:57.024Z,1509690957.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:57.402Z,1509690957.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:57.429Z,1509690957.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:57.820Z,1509690957.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:57.835Z,1509690957.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:58.218Z,1509690958.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:58.232Z,1509690958.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:58.621Z,1509690958.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:58.643Z,1509690958.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:59.009Z,1509690959.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:59.030Z,1509690959.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:59.406Z,1509690959.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:59.421Z,1509690959.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:35:59.820Z,1509690959.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:35:59.836Z,1509690959.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:00.222Z,1509690960.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:00.263Z,1509690960.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:00.622Z,1509690960.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:00.638Z,1509690960.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:01.002Z,1509690961.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:01.080Z,1509690961.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:01.400Z,1509690961.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:01.434Z,1509690961.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:01.782Z,1509690961.782 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T06:36:01.782Z,1509690961.782 [NAL9602] Data Fault, FailCount= 5
2017-11-03T06:36:01.782Z,1509690961.782 [NAL9602](ERROR): Data Fault
2017-11-03T06:36:01.802Z,1509690961.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:01.846Z,1509690961.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:01.966Z,1509690961.966 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T06:36:01.967Z,1509690961.967 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T06:36:02.182Z,1509690962.182 [NAL9602](INFO): Powering down
2017-11-03T06:36:02.201Z,1509690962.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:02.248Z,1509690962.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:02.343Z,1509690962.343 [CBIT](INFO): Critical error at 20171103T063601
2017-11-03T06:36:02.614Z,1509690962.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:02.633Z,1509690962.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:03.001Z,1509690963.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:03.120Z,1509690963.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:03.400Z,1509690963.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:03.442Z,1509690963.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:03.794Z,1509690963.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:03.872Z,1509690963.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:04.222Z,1509690964.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:04.237Z,1509690964.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:04.602Z,1509690964.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:04.656Z,1509690964.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:04.000Z,1509690965.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:05.042Z,1509690965.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:05.400Z,1509690965.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:05.468Z,1509690965.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:05.801Z,1509690965.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:05.878Z,1509690965.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:06.201Z,1509690966.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:06.276Z,1509690966.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:12.542Z,1509690972.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:12.582Z,1509690972.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:12.705Z,1509690972.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:12.743Z,1509690972.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:13.100Z,1509690973.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:13.119Z,1509690973.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:13.504Z,1509690973.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:13.531Z,1509690973.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:13.900Z,1509690973.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:13.920Z,1509690973.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:14.298Z,1509690974.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:14.319Z,1509690974.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:14.702Z,1509690974.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:14.717Z,1509690974.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:15.100Z,1509690975.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:15.115Z,1509690975.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:15.500Z,1509690975.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:15.514Z,1509690975.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:15.896Z,1509690975.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:15.911Z,1509690975.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:16.300Z,1509690976.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:16.343Z,1509690976.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:16.695Z,1509690976.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:16.710Z,1509690976.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:17.102Z,1509690977.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:17.117Z,1509690977.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:17.502Z,1509690977.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:17.523Z,1509690977.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:17.902Z,1509690977.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:17.917Z,1509690977.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:18.295Z,1509690978.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:18.334Z,1509690978.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:18.700Z,1509690978.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:18.715Z,1509690978.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:19.099Z,1509690979.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:19.139Z,1509690979.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:19.502Z,1509690979.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:19.517Z,1509690979.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:19.900Z,1509690979.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:19.999Z,1509690979.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:20.302Z,1509690980.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:20.346Z,1509690980.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:20.699Z,1509690980.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:20.714Z,1509690980.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:21.101Z,1509690981.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:21.117Z,1509690981.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:21.499Z,1509690981.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:21.513Z,1509690981.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:21.903Z,1509690981.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:21.917Z,1509690981.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:22.301Z,1509690982.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:22.316Z,1509690982.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:22.703Z,1509690982.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:22.717Z,1509690982.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:23.099Z,1509690983.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:23.113Z,1509690983.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:23.508Z,1509690983.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:23.606Z,1509690983.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:23.900Z,1509690983.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:23.938Z,1509690983.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:24.299Z,1509690984.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:24.354Z,1509690984.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:24.700Z,1509690984.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:24.723Z,1509690984.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:25.099Z,1509690985.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:25.126Z,1509690985.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:25.509Z,1509690985.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:25.554Z,1509690985.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:25.899Z,1509690985.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:25.919Z,1509690985.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:26.294Z,1509690986.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:26.334Z,1509690986.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:26.698Z,1509690986.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:26.721Z,1509690986.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:27.100Z,1509690987.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:27.131Z,1509690987.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:27.502Z,1509690987.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:27.537Z,1509690987.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:27.899Z,1509690987.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:27.914Z,1509690987.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:28.302Z,1509690988.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:28.343Z,1509690988.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:28.699Z,1509690988.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:28.714Z,1509690988.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:29.102Z,1509690989.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:29.116Z,1509690989.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:29.502Z,1509690989.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:29.538Z,1509690989.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:29.899Z,1509690989.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:29.913Z,1509690989.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:30.306Z,1509690990.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:30.321Z,1509690990.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:30.702Z,1509690990.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:30.723Z,1509690990.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:31.099Z,1509690991.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:31.158Z,1509690991.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:31.504Z,1509690991.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:31.519Z,1509690991.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:31.904Z,1509690991.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:31.919Z,1509690991.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:32.303Z,1509690992.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:32.366Z,1509690992.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:32.704Z,1509690992.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:32.719Z,1509690992.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:33.103Z,1509690993.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:33.151Z,1509690993.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:33.503Z,1509690993.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:33.517Z,1509690993.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:33.901Z,1509690993.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:33.948Z,1509690993.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:34.303Z,1509690994.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:34.355Z,1509690994.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:34.703Z,1509690994.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:34.722Z,1509690994.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:35.107Z,1509690995.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:35.122Z,1509690995.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:35.507Z,1509690995.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:35.523Z,1509690995.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:35.906Z,1509690995.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:35.921Z,1509690995.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:36.302Z,1509690996.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:36.317Z,1509690996.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:36.707Z,1509690996.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:36.722Z,1509690996.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:37.107Z,1509690997.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:37.121Z,1509690997.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:37.502Z,1509690997.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:37.517Z,1509690997.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:37.903Z,1509690997.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:37.918Z,1509690997.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:38.306Z,1509690998.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:38.321Z,1509690998.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:38.702Z,1509690998.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:38.717Z,1509690998.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:39.107Z,1509690999.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:39.122Z,1509690999.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:39.506Z,1509690999.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:39.520Z,1509690999.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:39.902Z,1509690999.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:39.917Z,1509690999.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:40.302Z,1509691000.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:40.317Z,1509691000.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:40.706Z,1509691000.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:40.721Z,1509691000.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:41.106Z,1509691001.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:41.121Z,1509691001.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:41.507Z,1509691001.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:41.522Z,1509691001.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:41.907Z,1509691001.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:41.926Z,1509691001.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:42.307Z,1509691002.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:42.322Z,1509691002.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:42.707Z,1509691002.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:42.722Z,1509691002.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:43.105Z,1509691003.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:43.126Z,1509691003.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:43.507Z,1509691003.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:43.522Z,1509691003.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:43.906Z,1509691003.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:43.927Z,1509691003.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:44.307Z,1509691004.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:44.321Z,1509691004.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:44.707Z,1509691004.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:44.770Z,1509691004.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:45.106Z,1509691005.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:45.121Z,1509691005.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:45.506Z,1509691005.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:45.521Z,1509691005.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:45.908Z,1509691005.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:45.922Z,1509691005.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:46.302Z,1509691006.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:46.371Z,1509691006.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:46.707Z,1509691006.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:46.722Z,1509691006.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:47.107Z,1509691007.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:47.122Z,1509691007.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:47.507Z,1509691007.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:47.559Z,1509691007.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:47.906Z,1509691007.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:47.921Z,1509691007.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:48.303Z,1509691008.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:48.362Z,1509691008.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:48.703Z,1509691008.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:48.762Z,1509691008.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:49.107Z,1509691009.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:49.122Z,1509691009.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:49.501Z,1509691009.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:49.522Z,1509691009.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:49.909Z,1509691009.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:49.923Z,1509691009.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:50.307Z,1509691010.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:50.321Z,1509691010.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:50.703Z,1509691010.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:50.717Z,1509691010.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:51.109Z,1509691011.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:51.123Z,1509691011.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:51.509Z,1509691011.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:51.523Z,1509691011.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:51.903Z,1509691011.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:51.917Z,1509691011.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:52.309Z,1509691012.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:52.324Z,1509691012.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:52.709Z,1509691012.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:52.723Z,1509691012.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:53.103Z,1509691013.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:53.117Z,1509691013.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:53.508Z,1509691013.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:53.523Z,1509691013.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:53.909Z,1509691013.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:53.923Z,1509691013.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:54.303Z,1509691014.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:54.317Z,1509691014.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:54.694Z,1509691014.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:54.721Z,1509691014.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:55.100Z,1509691015.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:55.134Z,1509691015.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:55.502Z,1509691015.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:55.527Z,1509691015.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:55.902Z,1509691015.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:55.927Z,1509691015.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:56.301Z,1509691016.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:56.327Z,1509691016.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:56.702Z,1509691016.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:56.726Z,1509691016.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:57.102Z,1509691017.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:57.127Z,1509691017.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:57.500Z,1509691017.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:57.529Z,1509691017.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:57.902Z,1509691017.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:57.928Z,1509691017.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:58.302Z,1509691018.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:58.327Z,1509691018.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:58.702Z,1509691018.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:58.735Z,1509691018.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:59.102Z,1509691019.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:59.120Z,1509691019.120 [BPC1](ERROR): Failed to parse message.
2017-11-03T06:36:59.121Z,1509691019.121 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T06:36:59.121Z,1509691019.121 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:36:59.121Z,1509691019.121 [BPC1](ERROR): Data Fault
2017-11-03T06:36:59.129Z,1509691019.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:59.229Z,1509691019.229 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:36:59.496Z,1509691019.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:59.527Z,1509691019.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:36:59.897Z,1509691019.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:36:59.912Z,1509691019.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:00.299Z,1509691020.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:00.335Z,1509691020.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:00.416Z,1509691020.416 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:37:00.416Z,1509691020.416 [BPC1] No Fault, FailCount= 1
2017-11-03T06:37:00.702Z,1509691020.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:00.783Z,1509691020.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:01.100Z,1509691021.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:01.133Z,1509691021.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:01.497Z,1509691021.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:01.543Z,1509691021.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:01.899Z,1509691021.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:01.930Z,1509691021.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:02.304Z,1509691022.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:02.339Z,1509691022.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:02.703Z,1509691022.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:02.717Z,1509691022.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:03.100Z,1509691023.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:03.116Z,1509691023.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:03.499Z,1509691023.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:03.519Z,1509691023.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:03.896Z,1509691023.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:03.911Z,1509691023.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:04.300Z,1509691024.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:04.316Z,1509691024.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:04.702Z,1509691024.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:04.743Z,1509691024.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:05.098Z,1509691025.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:05.113Z,1509691025.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:05.498Z,1509691025.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:05.513Z,1509691025.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:05.897Z,1509691025.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:05.950Z,1509691025.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:05.953Z,1509691025.953 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T06:37:05.953Z,1509691025.953 [Default:CheckIn:C.Wait] Stopped
2017-11-03T06:37:05.953Z,1509691025.953 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T06:37:05.954Z,1509691025.954 [Default:CheckIn:D] Running Loop=1
2017-11-03T06:37:06.302Z,1509691026.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:06.316Z,1509691026.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:06.320Z,1509691026.320 [Default:CheckIn:D] Stopped
2017-11-03T06:37:06.320Z,1509691026.320 [Default:CheckIn:E] Running Loop=1
2017-11-03T06:37:09.399Z,1509691029.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:09.415Z,1509691029.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:09.418Z,1509691029.418 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 381.979232 min 
2017-11-03T06:37:09.418Z,1509691029.418 [Default:CheckIn:E] Stopped
2017-11-03T06:37:09.419Z,1509691029.419 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T06:37:09.419Z,1509691029.419 [Default:CheckIn] Stopped
2017-11-03T06:37:09.419Z,1509691029.419 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T06:37:09.419Z,1509691029.419 [Default:CheckIn](INFO): Running loop #38
2017-11-03T06:37:09.419Z,1509691029.419 [Default:CheckIn] Running Loop=38
2017-11-03T06:37:09.419Z,1509691029.419 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T06:37:09.419Z,1509691029.419 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T06:37:09.563Z,1509691029.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:09.602Z,1509691029.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:09.961Z,1509691029.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:09.993Z,1509691029.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:10.362Z,1509691030.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:10.394Z,1509691030.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:10.762Z,1509691030.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:10.803Z,1509691030.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:11.162Z,1509691031.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:11.177Z,1509691031.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:11.562Z,1509691031.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:11.577Z,1509691031.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:11.959Z,1509691031.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:12.018Z,1509691032.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:12.366Z,1509691032.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:12.381Z,1509691032.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:12.759Z,1509691032.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:12.774Z,1509691032.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:13.165Z,1509691033.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:13.180Z,1509691033.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:13.559Z,1509691033.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:13.616Z,1509691033.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:13.968Z,1509691033.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:13.983Z,1509691033.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:14.367Z,1509691034.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:14.415Z,1509691034.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:14.767Z,1509691034.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:14.781Z,1509691034.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:15.164Z,1509691035.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:15.215Z,1509691035.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:15.567Z,1509691035.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:15.615Z,1509691035.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:15.967Z,1509691035.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:15.981Z,1509691035.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:16.364Z,1509691036.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:16.379Z,1509691036.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:16.764Z,1509691036.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:16.779Z,1509691036.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:17.166Z,1509691037.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:17.181Z,1509691037.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:17.567Z,1509691037.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:17.583Z,1509691037.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:17.964Z,1509691037.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:17.979Z,1509691037.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:18.364Z,1509691038.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:18.379Z,1509691038.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:18.763Z,1509691038.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:18.778Z,1509691038.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:19.164Z,1509691039.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:19.179Z,1509691039.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:19.566Z,1509691039.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:19.581Z,1509691039.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:19.965Z,1509691039.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:19.981Z,1509691039.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:20.363Z,1509691040.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:20.378Z,1509691040.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:20.767Z,1509691040.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:20.782Z,1509691040.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:21.163Z,1509691041.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:21.179Z,1509691041.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:21.563Z,1509691041.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:21.577Z,1509691041.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:21.966Z,1509691041.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:21.980Z,1509691041.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:22.365Z,1509691042.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:22.380Z,1509691042.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:22.765Z,1509691042.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:22.780Z,1509691042.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:23.167Z,1509691043.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:23.187Z,1509691043.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:23.565Z,1509691043.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:23.580Z,1509691043.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:23.975Z,1509691043.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:24.011Z,1509691044.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:24.367Z,1509691044.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:24.387Z,1509691044.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:24.765Z,1509691044.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:24.780Z,1509691044.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:25.165Z,1509691045.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:25.180Z,1509691045.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:25.564Z,1509691045.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:25.580Z,1509691045.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:25.965Z,1509691045.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:26.029Z,1509691046.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:26.365Z,1509691046.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:26.379Z,1509691046.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:26.766Z,1509691046.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:26.781Z,1509691046.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:27.165Z,1509691047.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:27.181Z,1509691047.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:27.563Z,1509691047.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:27.578Z,1509691047.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:27.967Z,1509691047.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:27.982Z,1509691047.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:28.363Z,1509691048.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:28.378Z,1509691048.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:28.763Z,1509691048.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:28.778Z,1509691048.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:29.167Z,1509691049.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:29.187Z,1509691049.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:29.563Z,1509691049.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:29.578Z,1509691049.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:29.965Z,1509691049.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:29.979Z,1509691049.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:30.366Z,1509691050.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:30.381Z,1509691050.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:30.765Z,1509691050.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:30.774Z,1509691050.774 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:37:30.774Z,1509691050.774 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:37:30.774Z,1509691050.774 [BPC1](ERROR): Communications Fault
2017-11-03T06:37:30.782Z,1509691050.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:30.873Z,1509691050.873 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:37:31.166Z,1509691051.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:31.181Z,1509691051.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:31.567Z,1509691051.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:31.587Z,1509691051.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:31.964Z,1509691051.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:31.979Z,1509691051.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:32.054Z,1509691052.054 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:37:32.054Z,1509691052.054 [BPC1] No Fault, FailCount= 1
2017-11-03T06:37:32.365Z,1509691052.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:32.431Z,1509691052.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:32.766Z,1509691052.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:32.781Z,1509691052.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:33.163Z,1509691053.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:33.215Z,1509691053.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:33.563Z,1509691053.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:33.578Z,1509691053.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:33.967Z,1509691053.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:33.983Z,1509691053.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:34.365Z,1509691054.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:34.380Z,1509691054.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:34.765Z,1509691054.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:34.779Z,1509691054.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:35.175Z,1509691055.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:35.195Z,1509691055.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:35.569Z,1509691055.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:35.585Z,1509691055.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:35.963Z,1509691055.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:35.977Z,1509691055.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:36.367Z,1509691056.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:36.382Z,1509691056.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:36.763Z,1509691056.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:36.778Z,1509691056.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:37.163Z,1509691057.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:37.177Z,1509691057.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:37.570Z,1509691057.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:37.585Z,1509691057.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:37.968Z,1509691057.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:37.983Z,1509691057.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:38.363Z,1509691058.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:38.377Z,1509691058.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:38.770Z,1509691058.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:38.785Z,1509691058.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:39.161Z,1509691059.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:39.180Z,1509691059.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:39.569Z,1509691059.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:39.584Z,1509691059.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:39.967Z,1509691059.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:39.982Z,1509691059.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:40.369Z,1509691060.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:40.385Z,1509691060.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:40.768Z,1509691060.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:40.783Z,1509691060.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:41.167Z,1509691061.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:41.183Z,1509691061.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:41.570Z,1509691061.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:41.585Z,1509691061.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:41.969Z,1509691061.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:41.984Z,1509691061.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:42.370Z,1509691062.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:42.391Z,1509691062.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:42.769Z,1509691062.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:42.784Z,1509691062.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:43.170Z,1509691063.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:43.184Z,1509691063.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:43.570Z,1509691063.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:43.652Z,1509691063.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:43.969Z,1509691063.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:43.984Z,1509691063.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:44.370Z,1509691064.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:44.385Z,1509691064.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:44.770Z,1509691064.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:44.827Z,1509691064.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:45.165Z,1509691065.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:45.182Z,1509691065.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:45.565Z,1509691065.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:45.603Z,1509691065.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:45.969Z,1509691065.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:46.023Z,1509691066.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:46.371Z,1509691066.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:46.386Z,1509691066.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:46.767Z,1509691066.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:46.781Z,1509691066.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:47.171Z,1509691067.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:47.191Z,1509691067.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:47.569Z,1509691067.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:47.585Z,1509691067.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:47.970Z,1509691067.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:47.985Z,1509691067.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:48.370Z,1509691068.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:48.385Z,1509691068.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:48.752Z,1509691068.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:48.779Z,1509691068.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:49.156Z,1509691069.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:49.180Z,1509691069.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:49.570Z,1509691069.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:49.591Z,1509691069.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:49.969Z,1509691069.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:49.985Z,1509691069.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:50.356Z,1509691070.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:50.386Z,1509691070.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:50.770Z,1509691070.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:50.807Z,1509691070.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:51.155Z,1509691071.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:51.180Z,1509691071.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:51.569Z,1509691071.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:51.584Z,1509691071.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:51.970Z,1509691071.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:51.991Z,1509691071.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:52.369Z,1509691072.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:52.385Z,1509691072.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:52.769Z,1509691072.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:52.784Z,1509691072.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:53.170Z,1509691073.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:53.185Z,1509691073.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:53.570Z,1509691073.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:53.585Z,1509691073.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:53.971Z,1509691073.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:53.986Z,1509691073.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:54.371Z,1509691074.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:54.391Z,1509691074.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:54.770Z,1509691074.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:54.791Z,1509691074.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:55.156Z,1509691075.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:55.187Z,1509691075.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:55.562Z,1509691075.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:55.588Z,1509691075.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:55.959Z,1509691075.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:55.985Z,1509691075.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:56.363Z,1509691076.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:56.452Z,1509691076.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:56.757Z,1509691076.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:56.772Z,1509691076.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:57.163Z,1509691077.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:57.214Z,1509691077.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:57.563Z,1509691077.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:57.594Z,1509691077.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:57.959Z,1509691077.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:58.011Z,1509691078.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:58.359Z,1509691078.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:58.415Z,1509691078.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:58.762Z,1509691078.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:58.797Z,1509691078.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:59.160Z,1509691079.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:59.175Z,1509691079.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:59.566Z,1509691079.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:59.596Z,1509691079.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:37:59.966Z,1509691079.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:37:59.997Z,1509691079.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:00.359Z,1509691080.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:00.374Z,1509691080.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:00.759Z,1509691080.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:00.774Z,1509691080.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:01.158Z,1509691081.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:01.173Z,1509691081.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:01.559Z,1509691081.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:01.573Z,1509691081.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:01.966Z,1509691081.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:01.995Z,1509691081.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:02.088Z,1509691082.088 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T06:38:02.089Z,1509691082.089 [NAL9602] No Fault, FailCount= 5
2017-11-03T06:38:02.346Z,1509691082.346 [NAL9602](INFO): Powering up NAL9602
2017-11-03T06:38:02.364Z,1509691082.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:02.401Z,1509691082.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:02.759Z,1509691082.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:02.774Z,1509691082.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:03.156Z,1509691083.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:03.171Z,1509691083.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:03.556Z,1509691083.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:03.571Z,1509691083.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:03.956Z,1509691083.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:03.971Z,1509691083.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:04.362Z,1509691084.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:04.378Z,1509691084.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:04.767Z,1509691084.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:04.801Z,1509691084.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:05.160Z,1509691085.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:05.201Z,1509691085.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:05.566Z,1509691085.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:05.598Z,1509691085.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:05.960Z,1509691085.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:05.975Z,1509691085.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:05.975Z,1509691085.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 128
2017-11-03T06:38:05.975Z,1509691085.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:38:05.977Z,1509691085.977 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:05.977Z,1509691085.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 128
2017-11-03T06:38:05.977Z,1509691085.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:38:05.979Z,1509691085.979 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:05.979Z,1509691085.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 128
2017-11-03T06:38:05.979Z,1509691085.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:38:06.073Z,1509691086.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:38:06.073Z,1509691086.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:38:06.073Z,1509691086.073 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:38:06.368Z,1509691086.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:06.491Z,1509691086.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:38:06.491Z,1509691086.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 128
2017-11-03T06:38:06.491Z,1509691086.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:38:06.491Z,1509691086.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 128
2017-11-03T06:38:06.492Z,1509691086.492 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:38:06.492Z,1509691086.492 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 128
2017-11-03T06:38:09.462Z,1509691089.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:09.543Z,1509691089.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:38:09.543Z,1509691089.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:38:09.544Z,1509691089.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:38:09.544Z,1509691089.544 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:38:09.545Z,1509691089.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:38:09.545Z,1509691089.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:38:09.545Z,1509691089.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:38:09.546Z,1509691089.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:38:09.546Z,1509691089.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:38:09.682Z,1509691089.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:09.722Z,1509691089.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T06:38:09.723Z,1509691089.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:10.080Z,1509691090.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:10.095Z,1509691090.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T06:38:10.096Z,1509691090.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:10.483Z,1509691090.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:10.541Z,1509691090.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T06:38:10.542Z,1509691090.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:10.882Z,1509691090.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:10.895Z,1509691090.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T06:38:10.897Z,1509691090.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:11.282Z,1509691091.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:11.337Z,1509691091.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T06:38:11.338Z,1509691091.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:11.676Z,1509691091.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:11.733Z,1509691091.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T06:38:11.734Z,1509691091.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:12.078Z,1509691092.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:12.098Z,1509691092.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T06:38:12.099Z,1509691092.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:12.481Z,1509691092.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:12.495Z,1509691092.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T06:38:12.496Z,1509691092.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:12.886Z,1509691092.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:12.900Z,1509691092.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T06:38:12.901Z,1509691092.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:13.258Z,1509691093.258 [NAL9602](INFO): NAL9602 initialized
2017-11-03T06:38:13.289Z,1509691093.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:13.303Z,1509691093.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T06:38:13.304Z,1509691093.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:13.680Z,1509691093.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:13.694Z,1509691093.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T06:38:13.695Z,1509691093.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:14.084Z,1509691094.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:14.098Z,1509691094.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T06:38:14.099Z,1509691094.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:14.489Z,1509691094.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:14.503Z,1509691094.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T06:38:14.504Z,1509691094.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:14.887Z,1509691094.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:14.901Z,1509691094.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T06:38:14.902Z,1509691094.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:15.282Z,1509691095.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:15.302Z,1509691095.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T06:38:15.303Z,1509691095.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:15.680Z,1509691095.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:15.694Z,1509691095.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T06:38:15.695Z,1509691095.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:16.084Z,1509691096.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:16.098Z,1509691096.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T06:38:16.099Z,1509691096.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:16.487Z,1509691096.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:16.502Z,1509691096.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T06:38:16.503Z,1509691096.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:16.883Z,1509691096.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:16.897Z,1509691096.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T06:38:16.898Z,1509691096.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:17.285Z,1509691097.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:17.299Z,1509691097.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T06:38:17.300Z,1509691097.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:17.689Z,1509691097.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:17.704Z,1509691097.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T06:38:17.705Z,1509691097.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:18.089Z,1509691098.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:18.110Z,1509691098.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T06:38:18.111Z,1509691098.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:18.484Z,1509691098.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:18.498Z,1509691098.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T06:38:18.499Z,1509691098.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:18.881Z,1509691098.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:18.895Z,1509691098.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T06:38:18.897Z,1509691098.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:19.277Z,1509691099.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:19.292Z,1509691099.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T06:38:19.293Z,1509691099.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:19.684Z,1509691099.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:19.706Z,1509691099.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T06:38:19.707Z,1509691099.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:20.089Z,1509691100.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:20.104Z,1509691100.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T06:38:20.105Z,1509691100.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:20.485Z,1509691100.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:20.500Z,1509691100.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T06:38:20.501Z,1509691100.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:20.889Z,1509691100.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:20.904Z,1509691100.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T06:38:20.905Z,1509691100.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:21.286Z,1509691101.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:21.301Z,1509691101.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T06:38:21.302Z,1509691101.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:21.683Z,1509691101.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:21.697Z,1509691101.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T06:38:21.698Z,1509691101.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:22.084Z,1509691102.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:22.092Z,1509691102.092 [BPC1](ERROR): Failed to parse message.
2017-11-03T06:38:22.093Z,1509691102.093 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T06:38:22.093Z,1509691102.093 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:38:22.093Z,1509691102.093 [BPC1](ERROR): Data Fault
2017-11-03T06:38:22.100Z,1509691102.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T06:38:22.101Z,1509691102.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:22.192Z,1509691102.192 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:38:22.483Z,1509691102.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:22.499Z,1509691102.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T06:38:22.500Z,1509691102.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:22.885Z,1509691102.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:22.899Z,1509691102.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T06:38:22.900Z,1509691102.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:23.289Z,1509691103.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:23.310Z,1509691103.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T06:38:23.311Z,1509691103.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:23.428Z,1509691103.428 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:38:23.428Z,1509691103.428 [BPC1] No Fault, FailCount= 1
2017-11-03T06:38:23.692Z,1509691103.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:23.775Z,1509691103.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T06:38:23.777Z,1509691103.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:24.092Z,1509691104.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:24.106Z,1509691104.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T06:38:24.107Z,1509691104.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:24.479Z,1509691104.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:24.519Z,1509691104.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T06:38:24.533Z,1509691104.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:24.884Z,1509691104.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:24.898Z,1509691104.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T06:38:24.899Z,1509691104.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:25.283Z,1509691105.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:25.297Z,1509691105.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T06:38:25.298Z,1509691105.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:25.683Z,1509691105.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:25.698Z,1509691105.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T06:38:25.698Z,1509691105.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:26.092Z,1509691106.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:26.107Z,1509691106.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:26.491Z,1509691106.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:26.506Z,1509691106.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:26.892Z,1509691106.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:26.914Z,1509691106.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:27.281Z,1509691107.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:27.296Z,1509691107.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:27.682Z,1509691107.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:27.702Z,1509691107.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:28.084Z,1509691108.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:28.099Z,1509691108.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:28.484Z,1509691108.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:28.499Z,1509691108.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:28.880Z,1509691108.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:28.895Z,1509691108.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:29.292Z,1509691109.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:29.307Z,1509691109.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:29.692Z,1509691109.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:29.715Z,1509691109.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:30.091Z,1509691110.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:30.157Z,1509691110.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:30.483Z,1509691110.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:30.498Z,1509691110.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:30.882Z,1509691110.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:30.897Z,1509691110.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:31.283Z,1509691111.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:31.298Z,1509691111.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:31.684Z,1509691111.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:31.698Z,1509691111.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:32.092Z,1509691112.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:32.107Z,1509691112.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:32.492Z,1509691112.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:32.507Z,1509691112.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:32.893Z,1509691112.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:32.907Z,1509691112.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:33.281Z,1509691113.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:33.295Z,1509691113.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:33.683Z,1509691113.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:33.698Z,1509691113.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:34.083Z,1509691114.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:34.098Z,1509691114.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:34.485Z,1509691114.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:34.500Z,1509691114.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:34.881Z,1509691114.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:34.896Z,1509691114.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:35.293Z,1509691115.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:35.351Z,1509691115.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:35.693Z,1509691115.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:35.709Z,1509691115.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:36.094Z,1509691116.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:36.109Z,1509691116.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:36.469Z,1509691116.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:36.519Z,1509691116.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:36.883Z,1509691116.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:36.903Z,1509691116.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:37.283Z,1509691117.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:37.339Z,1509691117.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:37.671Z,1509691117.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:37.740Z,1509691117.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:38.094Z,1509691118.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:38.110Z,1509691118.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:38.493Z,1509691118.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:38.515Z,1509691118.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:38.882Z,1509691118.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:38.914Z,1509691118.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:39.275Z,1509691119.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:39.306Z,1509691119.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:39.672Z,1509691119.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:39.705Z,1509691119.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:40.075Z,1509691120.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:40.105Z,1509691120.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:40.476Z,1509691120.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:40.509Z,1509691120.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:40.875Z,1509691120.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:40.905Z,1509691120.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:41.281Z,1509691121.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:41.311Z,1509691121.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:41.693Z,1509691121.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:41.715Z,1509691121.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:42.093Z,1509691122.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:42.108Z,1509691122.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:42.476Z,1509691122.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:42.506Z,1509691122.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:42.873Z,1509691122.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:42.904Z,1509691122.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:43.273Z,1509691123.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:43.305Z,1509691123.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:43.677Z,1509691123.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:43.692Z,1509691123.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:44.089Z,1509691124.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:44.123Z,1509691124.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:44.481Z,1509691124.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:44.517Z,1509691124.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:44.893Z,1509691124.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:44.923Z,1509691124.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:45.274Z,1509691125.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:45.289Z,1509691125.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:45.680Z,1509691125.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:45.695Z,1509691125.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:46.077Z,1509691126.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:46.092Z,1509691126.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:46.480Z,1509691126.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:46.516Z,1509691126.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:46.874Z,1509691126.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:46.890Z,1509691126.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:47.290Z,1509691127.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:47.315Z,1509691127.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:47.689Z,1509691127.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:47.715Z,1509691127.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:48.085Z,1509691128.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:48.121Z,1509691128.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:48.478Z,1509691128.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:48.492Z,1509691128.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:48.875Z,1509691128.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:48.934Z,1509691128.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:49.277Z,1509691129.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:49.292Z,1509691129.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:49.676Z,1509691129.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:49.743Z,1509691129.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:50.082Z,1509691130.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:50.111Z,1509691130.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:50.489Z,1509691130.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:50.542Z,1509691130.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:50.888Z,1509691130.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:50.903Z,1509691130.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:51.283Z,1509691131.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:51.343Z,1509691131.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:51.682Z,1509691131.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:51.739Z,1509691131.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:52.083Z,1509691132.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:52.097Z,1509691132.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:52.482Z,1509691132.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:52.497Z,1509691132.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:52.883Z,1509691132.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:52.903Z,1509691132.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:53.289Z,1509691133.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:53.304Z,1509691133.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:53.690Z,1509691133.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:53.705Z,1509691133.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:54.088Z,1509691134.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:54.111Z,1509691134.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:54.483Z,1509691134.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:54.497Z,1509691134.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:54.874Z,1509691134.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:54.893Z,1509691134.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:55.283Z,1509691135.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:55.298Z,1509691135.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:55.683Z,1509691135.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:55.698Z,1509691135.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:56.093Z,1509691136.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:56.108Z,1509691136.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:56.492Z,1509691136.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:56.507Z,1509691136.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:56.889Z,1509691136.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:56.910Z,1509691136.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:57.278Z,1509691137.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:57.299Z,1509691137.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:57.681Z,1509691137.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:57.696Z,1509691137.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:58.084Z,1509691138.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:58.099Z,1509691138.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:58.485Z,1509691138.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:58.500Z,1509691138.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:58.880Z,1509691138.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:58.899Z,1509691138.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:59.293Z,1509691139.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:59.308Z,1509691139.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:38:59.690Z,1509691139.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:38:59.705Z,1509691139.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:00.092Z,1509691140.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:00.107Z,1509691140.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:00.481Z,1509691140.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:00.496Z,1509691140.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:00.883Z,1509691140.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:00.903Z,1509691140.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:01.283Z,1509691141.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:01.299Z,1509691141.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:01.684Z,1509691141.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:01.699Z,1509691141.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:02.092Z,1509691142.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:02.154Z,1509691142.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:02.492Z,1509691142.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:02.515Z,1509691142.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:02.893Z,1509691142.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:02.911Z,1509691142.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:03.283Z,1509691143.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:03.299Z,1509691143.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:03.680Z,1509691143.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:03.738Z,1509691143.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:04.081Z,1509691144.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:04.096Z,1509691144.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:04.486Z,1509691144.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:04.543Z,1509691144.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:04.882Z,1509691144.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:04.903Z,1509691144.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:05.292Z,1509691145.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:05.343Z,1509691145.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:05.692Z,1509691145.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:05.743Z,1509691145.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:06.092Z,1509691146.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:06.114Z,1509691146.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:06.482Z,1509691146.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:06.502Z,1509691146.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:09.555Z,1509691149.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:09.587Z,1509691149.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:09.712Z,1509691149.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:09.748Z,1509691149.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:10.126Z,1509691150.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:10.153Z,1509691150.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:10.538Z,1509691150.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:10.556Z,1509691150.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:10.926Z,1509691150.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:10.960Z,1509691150.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:11.308Z,1509691151.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:11.323Z,1509691151.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:11.715Z,1509691151.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:11.750Z,1509691151.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:12.116Z,1509691152.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:12.139Z,1509691152.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:12.512Z,1509691152.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:12.528Z,1509691152.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:12.926Z,1509691152.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:12.959Z,1509691152.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:13.334Z,1509691153.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:13.353Z,1509691153.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:13.725Z,1509691153.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:13.754Z,1509691153.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:14.113Z,1509691154.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:14.145Z,1509691154.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:14.515Z,1509691154.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:14.548Z,1509691154.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:14.934Z,1509691154.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:14.953Z,1509691154.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:15.322Z,1509691155.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:15.345Z,1509691155.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:15.734Z,1509691155.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:15.753Z,1509691155.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:16.116Z,1509691156.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:16.151Z,1509691156.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:16.513Z,1509691156.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:16.559Z,1509691156.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:16.930Z,1509691156.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:16.953Z,1509691156.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:17.325Z,1509691157.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:17.378Z,1509691157.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:17.726Z,1509691157.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:17.750Z,1509691157.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:18.118Z,1509691158.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:18.141Z,1509691158.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:18.512Z,1509691158.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:18.553Z,1509691158.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:18.927Z,1509691158.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:18.951Z,1509691158.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:19.327Z,1509691159.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:19.399Z,1509691159.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:19.726Z,1509691159.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:19.782Z,1509691159.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:20.112Z,1509691160.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:20.129Z,1509691160.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:20.512Z,1509691160.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:20.529Z,1509691160.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:20.942Z,1509691160.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:20.957Z,1509691160.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:21.326Z,1509691161.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:21.351Z,1509691161.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:21.730Z,1509691161.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:21.759Z,1509691161.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:22.120Z,1509691162.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:22.155Z,1509691162.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:22.512Z,1509691162.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:22.528Z,1509691162.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:22.930Z,1509691162.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:22.955Z,1509691162.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:23.325Z,1509691163.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:23.351Z,1509691163.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:23.726Z,1509691163.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:23.750Z,1509691163.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:24.116Z,1509691164.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:24.140Z,1509691164.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:24.520Z,1509691164.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:24.535Z,1509691164.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:24.934Z,1509691164.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:24.966Z,1509691164.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:25.334Z,1509691165.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:25.365Z,1509691165.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:25.734Z,1509691165.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:25.748Z,1509691165.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:26.119Z,1509691166.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:26.139Z,1509691166.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:26.522Z,1509691166.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:26.537Z,1509691166.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:26.925Z,1509691166.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:26.940Z,1509691166.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:27.334Z,1509691167.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:27.368Z,1509691167.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:27.727Z,1509691167.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:27.742Z,1509691167.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:28.122Z,1509691168.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:28.142Z,1509691168.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:28.520Z,1509691168.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:28.535Z,1509691168.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:28.935Z,1509691168.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:28.967Z,1509691168.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:29.334Z,1509691169.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:29.365Z,1509691169.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:29.735Z,1509691169.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:29.767Z,1509691169.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:30.120Z,1509691170.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:30.136Z,1509691170.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:30.520Z,1509691170.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:30.535Z,1509691170.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:30.934Z,1509691170.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:30.995Z,1509691170.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:31.325Z,1509691171.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:31.340Z,1509691171.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:31.734Z,1509691171.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:31.805Z,1509691171.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:32.121Z,1509691172.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:32.136Z,1509691172.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:32.520Z,1509691172.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:32.566Z,1509691172.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:32.926Z,1509691172.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:32.941Z,1509691172.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:33.322Z,1509691173.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:33.374Z,1509691173.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:33.734Z,1509691173.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:33.787Z,1509691173.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:34.121Z,1509691174.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:34.137Z,1509691174.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:34.520Z,1509691174.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:34.535Z,1509691174.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:34.934Z,1509691174.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:34.968Z,1509691174.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:35.334Z,1509691175.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:35.365Z,1509691175.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:35.734Z,1509691175.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:35.766Z,1509691175.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:36.120Z,1509691176.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:36.135Z,1509691176.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:36.519Z,1509691176.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:36.547Z,1509691176.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:36.924Z,1509691176.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:36.939Z,1509691176.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:37.330Z,1509691177.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:37.345Z,1509691177.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:37.726Z,1509691177.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:37.741Z,1509691177.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:38.123Z,1509691178.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:38.143Z,1509691178.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:38.522Z,1509691178.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:38.536Z,1509691178.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:38.926Z,1509691178.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:38.941Z,1509691178.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:39.330Z,1509691179.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:39.345Z,1509691179.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:39.726Z,1509691179.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:39.740Z,1509691179.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:40.122Z,1509691180.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:40.137Z,1509691180.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:40.523Z,1509691180.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:40.543Z,1509691180.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:40.925Z,1509691180.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:40.940Z,1509691180.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:41.326Z,1509691181.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:41.341Z,1509691181.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:41.726Z,1509691181.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:41.741Z,1509691181.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:42.123Z,1509691182.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:42.138Z,1509691182.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:42.521Z,1509691182.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:42.536Z,1509691182.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:42.927Z,1509691182.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:42.947Z,1509691182.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:43.326Z,1509691183.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:43.341Z,1509691183.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:43.727Z,1509691183.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:43.742Z,1509691183.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:44.123Z,1509691184.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:44.138Z,1509691184.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:44.522Z,1509691184.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:44.582Z,1509691184.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:44.930Z,1509691184.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:44.946Z,1509691184.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:45.330Z,1509691185.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:45.346Z,1509691185.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:45.725Z,1509691185.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:45.787Z,1509691185.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:46.122Z,1509691186.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:46.137Z,1509691186.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:46.522Z,1509691186.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:46.538Z,1509691186.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:46.925Z,1509691186.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:46.974Z,1509691186.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:47.326Z,1509691187.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:47.341Z,1509691187.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:47.726Z,1509691187.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:47.778Z,1509691187.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:48.123Z,1509691188.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:48.169Z,1509691188.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:48.522Z,1509691188.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:48.537Z,1509691188.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:48.926Z,1509691188.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:48.941Z,1509691188.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:49.330Z,1509691189.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:49.350Z,1509691189.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:49.726Z,1509691189.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:49.741Z,1509691189.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:50.123Z,1509691190.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:50.138Z,1509691190.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:50.521Z,1509691190.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:50.536Z,1509691190.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:50.926Z,1509691190.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:50.941Z,1509691190.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:51.330Z,1509691191.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:51.345Z,1509691191.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:51.724Z,1509691191.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:51.739Z,1509691191.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:52.124Z,1509691192.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:52.147Z,1509691192.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:52.520Z,1509691192.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:52.543Z,1509691192.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:52.925Z,1509691192.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:52.940Z,1509691192.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:53.326Z,1509691193.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:53.341Z,1509691193.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:53.726Z,1509691193.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:53.741Z,1509691193.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:54.123Z,1509691194.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:54.185Z,1509691194.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:54.522Z,1509691194.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:54.537Z,1509691194.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:54.925Z,1509691194.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:54.940Z,1509691194.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:55.326Z,1509691195.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:55.340Z,1509691195.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:55.730Z,1509691195.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:55.745Z,1509691195.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:56.122Z,1509691196.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:56.137Z,1509691196.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:56.521Z,1509691196.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:56.536Z,1509691196.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:56.926Z,1509691196.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:56.947Z,1509691196.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:57.330Z,1509691197.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:57.345Z,1509691197.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:57.726Z,1509691197.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:57.741Z,1509691197.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:58.125Z,1509691198.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:58.141Z,1509691198.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:58.523Z,1509691198.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:58.538Z,1509691198.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:58.926Z,1509691198.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:58.941Z,1509691198.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:59.331Z,1509691199.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:59.351Z,1509691199.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:39:59.727Z,1509691199.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:39:59.743Z,1509691199.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:00.124Z,1509691200.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:00.184Z,1509691200.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:00.524Z,1509691200.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:00.540Z,1509691200.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:00.929Z,1509691200.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:00.979Z,1509691200.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:01.329Z,1509691201.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:01.347Z,1509691201.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:01.729Z,1509691201.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:01.779Z,1509691201.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:02.124Z,1509691202.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:02.186Z,1509691202.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:02.521Z,1509691202.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:02.536Z,1509691202.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:02.930Z,1509691202.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:02.945Z,1509691202.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:03.329Z,1509691203.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:03.351Z,1509691203.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:03.730Z,1509691203.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:03.744Z,1509691203.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:04.126Z,1509691204.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:04.141Z,1509691204.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:04.524Z,1509691204.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:04.547Z,1509691204.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:04.929Z,1509691204.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:04.944Z,1509691204.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:05.331Z,1509691205.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:05.346Z,1509691205.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:05.729Z,1509691205.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:05.751Z,1509691205.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:06.115Z,1509691206.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:06.143Z,1509691206.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:06.516Z,1509691206.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:06.543Z,1509691206.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:09.610Z,1509691209.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:09.636Z,1509691209.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:09.787Z,1509691209.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:09.807Z,1509691209.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:10.182Z,1509691210.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:10.201Z,1509691210.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:10.567Z,1509691210.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:10.594Z,1509691210.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:10.960Z,1509691210.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:10.995Z,1509691210.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:11.363Z,1509691211.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:11.391Z,1509691211.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:11.763Z,1509691211.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:11.795Z,1509691211.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:12.187Z,1509691212.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:12.202Z,1509691212.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:12.586Z,1509691212.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:12.607Z,1509691212.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:12.982Z,1509691212.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:12.997Z,1509691212.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:13.360Z,1509691213.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:13.394Z,1509691213.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:13.763Z,1509691213.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:13.790Z,1509691213.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:14.164Z,1509691214.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:14.254Z,1509691214.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:14.560Z,1509691214.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:14.590Z,1509691214.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:14.986Z,1509691214.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:15.037Z,1509691215.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:15.377Z,1509691215.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:15.392Z,1509691215.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:15.780Z,1509691215.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:15.819Z,1509691215.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:16.163Z,1509691216.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:16.211Z,1509691216.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:16.563Z,1509691216.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:16.595Z,1509691216.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:16.963Z,1509691216.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:16.987Z,1509691216.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:17.364Z,1509691217.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:17.389Z,1509691217.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:17.763Z,1509691217.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:17.812Z,1509691217.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:18.180Z,1509691218.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:18.195Z,1509691218.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:18.586Z,1509691218.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:18.600Z,1509691218.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:18.981Z,1509691218.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:18.996Z,1509691218.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:19.362Z,1509691219.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:19.387Z,1509691219.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:19.763Z,1509691219.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:19.789Z,1509691219.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:20.157Z,1509691220.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:20.189Z,1509691220.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:20.556Z,1509691220.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:20.571Z,1509691220.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:20.985Z,1509691220.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:21.000Z,1509691221.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:21.369Z,1509691221.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:21.402Z,1509691221.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:21.769Z,1509691221.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:21.794Z,1509691221.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:22.163Z,1509691222.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:22.194Z,1509691222.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:22.556Z,1509691222.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:22.571Z,1509691222.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:22.963Z,1509691222.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:22.993Z,1509691222.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:23.357Z,1509691223.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:23.388Z,1509691223.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:23.763Z,1509691223.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:23.803Z,1509691223.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:24.182Z,1509691224.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:24.197Z,1509691224.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:24.585Z,1509691224.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:24.606Z,1509691224.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:24.982Z,1509691224.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:24.997Z,1509691224.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:25.360Z,1509691225.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:25.395Z,1509691225.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:25.761Z,1509691225.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:25.795Z,1509691225.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:26.162Z,1509691226.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:26.193Z,1509691226.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:26.556Z,1509691226.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:26.572Z,1509691226.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:26.987Z,1509691226.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:27.006Z,1509691227.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:27.374Z,1509691227.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:27.407Z,1509691227.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:27.773Z,1509691227.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:27.850Z,1509691227.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:28.160Z,1509691228.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:28.218Z,1509691228.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:28.559Z,1509691228.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:28.575Z,1509691228.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:28.967Z,1509691228.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:29.007Z,1509691229.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:29.361Z,1509691229.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:29.376Z,1509691229.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:29.759Z,1509691229.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:29.838Z,1509691229.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:30.177Z,1509691230.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:30.203Z,1509691230.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:30.573Z,1509691230.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:30.615Z,1509691230.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:30.978Z,1509691230.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:31.001Z,1509691231.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:31.364Z,1509691231.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:31.405Z,1509691231.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:31.760Z,1509691231.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:31.774Z,1509691231.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:32.168Z,1509691232.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:32.183Z,1509691232.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:32.564Z,1509691232.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:32.579Z,1509691232.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:32.981Z,1509691232.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:33.005Z,1509691233.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:33.378Z,1509691233.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:33.401Z,1509691233.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:33.777Z,1509691233.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:33.806Z,1509691233.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:34.167Z,1509691234.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:34.181Z,1509691234.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:34.564Z,1509691234.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:34.579Z,1509691234.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:34.967Z,1509691234.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:35.003Z,1509691235.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:35.361Z,1509691235.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:35.376Z,1509691235.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:35.765Z,1509691235.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:35.779Z,1509691235.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:36.178Z,1509691236.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:36.207Z,1509691236.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:36.581Z,1509691236.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:36.606Z,1509691236.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:36.978Z,1509691236.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:37.008Z,1509691237.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:37.365Z,1509691237.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:37.380Z,1509691237.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:37.760Z,1509691237.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:37.775Z,1509691237.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:38.166Z,1509691238.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:38.181Z,1509691238.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:38.564Z,1509691238.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:38.587Z,1509691238.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:38.981Z,1509691238.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:39.007Z,1509691239.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:39.378Z,1509691239.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:39.408Z,1509691239.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:39.778Z,1509691239.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:39.808Z,1509691239.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:40.167Z,1509691240.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:40.182Z,1509691240.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:40.565Z,1509691240.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:40.586Z,1509691240.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:40.965Z,1509691240.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:40.987Z,1509691240.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:41.369Z,1509691241.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:41.384Z,1509691241.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:41.761Z,1509691241.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:41.777Z,1509691241.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:42.179Z,1509691242.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:42.208Z,1509691242.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:42.574Z,1509691242.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:42.663Z,1509691242.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:42.979Z,1509691242.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:43.008Z,1509691243.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:43.365Z,1509691243.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:43.409Z,1509691243.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:43.761Z,1509691243.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:43.776Z,1509691243.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:44.165Z,1509691244.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:44.215Z,1509691244.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:44.567Z,1509691244.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:44.627Z,1509691244.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:44.981Z,1509691244.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:45.008Z,1509691245.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:45.378Z,1509691245.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:45.409Z,1509691245.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:45.778Z,1509691245.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:45.808Z,1509691245.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:46.165Z,1509691246.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:46.180Z,1509691246.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:46.567Z,1509691246.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:46.587Z,1509691246.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:46.965Z,1509691246.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:46.980Z,1509691246.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:47.367Z,1509691247.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:47.386Z,1509691247.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:47.765Z,1509691247.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:47.780Z,1509691247.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:48.178Z,1509691248.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:48.208Z,1509691248.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:48.577Z,1509691248.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:48.608Z,1509691248.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:48.970Z,1509691248.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:48.986Z,1509691248.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:49.364Z,1509691249.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:49.380Z,1509691249.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:49.764Z,1509691249.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:49.780Z,1509691249.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:50.165Z,1509691250.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:50.180Z,1509691250.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:50.564Z,1509691250.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:50.583Z,1509691250.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:50.977Z,1509691250.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:51.007Z,1509691251.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:51.378Z,1509691251.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:51.406Z,1509691251.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:51.778Z,1509691251.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:51.809Z,1509691251.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:52.164Z,1509691252.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:52.186Z,1509691252.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:52.565Z,1509691252.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:52.580Z,1509691252.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:52.965Z,1509691252.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:52.980Z,1509691252.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:53.365Z,1509691253.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:53.380Z,1509691253.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:53.766Z,1509691253.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:53.811Z,1509691253.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:54.183Z,1509691254.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:54.213Z,1509691254.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:54.580Z,1509691254.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:54.619Z,1509691254.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:54.980Z,1509691254.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:55.007Z,1509691255.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:55.370Z,1509691255.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:55.412Z,1509691255.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:55.781Z,1509691255.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:55.833Z,1509691255.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:56.175Z,1509691256.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:56.217Z,1509691256.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:56.586Z,1509691256.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:56.699Z,1509691256.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:56.986Z,1509691256.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:57.030Z,1509691257.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:57.384Z,1509691257.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:57.459Z,1509691257.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:57.772Z,1509691257.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:57.795Z,1509691257.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:58.178Z,1509691258.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:58.247Z,1509691258.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:58.563Z,1509691258.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:58.631Z,1509691258.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:58.985Z,1509691258.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:59.013Z,1509691259.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:59.361Z,1509691259.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:59.390Z,1509691259.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:40:59.760Z,1509691259.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:40:59.842Z,1509691259.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:00.180Z,1509691260.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:00.204Z,1509691260.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:00.584Z,1509691260.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:00.608Z,1509691260.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:00.980Z,1509691260.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:01.035Z,1509691261.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:01.361Z,1509691261.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:01.412Z,1509691261.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:01.760Z,1509691261.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:01.822Z,1509691261.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:02.163Z,1509691262.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:02.223Z,1509691262.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:02.561Z,1509691262.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:02.596Z,1509691262.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:02.970Z,1509691262.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:03.039Z,1509691263.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:03.384Z,1509691263.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:03.419Z,1509691263.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:03.797Z,1509691263.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:03.825Z,1509691263.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:04.161Z,1509691264.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:04.206Z,1509691264.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:04.562Z,1509691264.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:04.610Z,1509691264.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:04.961Z,1509691264.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:05.009Z,1509691265.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:05.378Z,1509691265.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:05.414Z,1509691265.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:05.770Z,1509691265.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:05.810Z,1509691265.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:06.180Z,1509691266.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:06.213Z,1509691266.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:06.584Z,1509691266.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:06.634Z,1509691266.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:10.194Z,1509691270.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:10.210Z,1509691270.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:10.210Z,1509691270.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 129
2017-11-03T06:41:10.210Z,1509691270.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:41:10.212Z,1509691270.212 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:10.212Z,1509691270.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 129
2017-11-03T06:41:10.212Z,1509691270.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:41:10.214Z,1509691270.214 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:10.214Z,1509691270.214 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 129
2017-11-03T06:41:10.214Z,1509691270.214 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:41:10.313Z,1509691270.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:41:10.313Z,1509691270.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:41:10.313Z,1509691270.313 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:41:10.349Z,1509691270.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:10.532Z,1509691270.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:41:10.532Z,1509691270.532 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 129
2017-11-03T06:41:10.533Z,1509691270.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:41:10.533Z,1509691270.533 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 129
2017-11-03T06:41:10.533Z,1509691270.533 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:41:10.533Z,1509691270.533 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 129
2017-11-03T06:41:10.750Z,1509691270.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:10.763Z,1509691270.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:41:10.764Z,1509691270.764 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:41:10.764Z,1509691270.764 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:41:10.765Z,1509691270.765 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:41:10.765Z,1509691270.765 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:41:10.765Z,1509691270.765 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:41:10.766Z,1509691270.766 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:41:10.766Z,1509691270.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:41:10.766Z,1509691270.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:41:11.148Z,1509691271.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:11.163Z,1509691271.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-03T06:41:11.164Z,1509691271.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:11.550Z,1509691271.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:11.590Z,1509691271.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-03T06:41:11.591Z,1509691271.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:11.965Z,1509691271.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:11.979Z,1509691271.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T06:41:11.981Z,1509691271.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:12.357Z,1509691272.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:12.402Z,1509691272.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-03T06:41:12.403Z,1509691272.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:12.761Z,1509691272.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:12.799Z,1509691272.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-03T06:41:12.800Z,1509691272.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:13.151Z,1509691273.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:13.165Z,1509691273.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-03T06:41:13.166Z,1509691273.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:13.551Z,1509691273.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:13.570Z,1509691273.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T06:41:13.571Z,1509691273.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:13.957Z,1509691273.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:13.978Z,1509691273.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T06:41:13.979Z,1509691273.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:14.365Z,1509691274.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:14.386Z,1509691274.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T06:41:14.387Z,1509691274.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:14.774Z,1509691274.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:14.788Z,1509691274.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T06:41:14.789Z,1509691274.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:15.150Z,1509691275.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:15.165Z,1509691275.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T06:41:15.166Z,1509691275.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:15.551Z,1509691275.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:15.606Z,1509691275.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T06:41:15.607Z,1509691275.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:15.951Z,1509691275.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:15.970Z,1509691275.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T06:41:15.971Z,1509691275.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:16.351Z,1509691276.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:16.365Z,1509691276.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T06:41:16.366Z,1509691276.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:16.751Z,1509691276.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:16.765Z,1509691276.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T06:41:16.766Z,1509691276.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:17.161Z,1509691277.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:17.176Z,1509691277.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T06:41:17.177Z,1509691277.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:17.565Z,1509691277.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:17.579Z,1509691277.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T06:41:17.580Z,1509691277.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:17.965Z,1509691277.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:17.979Z,1509691277.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T06:41:17.980Z,1509691277.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:18.347Z,1509691278.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:18.366Z,1509691278.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T06:41:18.367Z,1509691278.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:18.743Z,1509691278.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:18.784Z,1509691278.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T06:41:18.797Z,1509691278.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:19.144Z,1509691279.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:19.185Z,1509691279.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T06:41:19.186Z,1509691279.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:19.547Z,1509691279.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:19.581Z,1509691279.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T06:41:19.582Z,1509691279.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:19.970Z,1509691279.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:19.984Z,1509691279.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-03T06:41:19.985Z,1509691279.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:20.374Z,1509691280.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:20.390Z,1509691280.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-03T06:41:20.391Z,1509691280.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:20.769Z,1509691280.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:20.784Z,1509691280.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-03T06:41:20.785Z,1509691280.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:21.148Z,1509691281.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:21.183Z,1509691281.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-03T06:41:21.184Z,1509691281.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:21.551Z,1509691281.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:21.581Z,1509691281.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T06:41:21.582Z,1509691281.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:21.948Z,1509691281.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:21.974Z,1509691281.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T06:41:21.975Z,1509691281.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:22.344Z,1509691282.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:22.358Z,1509691282.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T06:41:22.359Z,1509691282.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:22.751Z,1509691282.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:22.778Z,1509691282.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T06:41:22.779Z,1509691282.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:23.162Z,1509691283.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:23.182Z,1509691283.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T06:41:23.183Z,1509691283.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:23.565Z,1509691283.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:23.579Z,1509691283.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T06:41:23.580Z,1509691283.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:23.966Z,1509691283.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:23.980Z,1509691283.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T06:41:23.981Z,1509691283.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:24.359Z,1509691284.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:24.378Z,1509691284.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T06:41:24.379Z,1509691284.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:24.756Z,1509691284.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:24.771Z,1509691284.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T06:41:24.772Z,1509691284.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:25.160Z,1509691285.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:25.251Z,1509691285.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T06:41:25.252Z,1509691285.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:25.556Z,1509691285.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:25.571Z,1509691285.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T06:41:25.572Z,1509691285.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:25.963Z,1509691285.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:26.014Z,1509691286.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T06:41:26.015Z,1509691286.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:26.364Z,1509691286.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:26.379Z,1509691286.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T06:41:26.379Z,1509691286.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:26.763Z,1509691286.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:26.814Z,1509691286.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T06:41:26.815Z,1509691286.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:27.156Z,1509691287.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:27.206Z,1509691287.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T06:41:27.207Z,1509691287.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:27.553Z,1509691287.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:27.567Z,1509691287.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T06:41:27.568Z,1509691287.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:27.958Z,1509691287.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:27.978Z,1509691287.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T06:41:27.979Z,1509691287.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:28.359Z,1509691288.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:28.378Z,1509691288.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T06:41:28.379Z,1509691288.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:28.759Z,1509691288.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:28.773Z,1509691288.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T06:41:28.774Z,1509691288.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:29.164Z,1509691289.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:29.178Z,1509691289.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T06:41:29.179Z,1509691289.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:29.563Z,1509691289.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:29.582Z,1509691289.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T06:41:29.583Z,1509691289.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:29.965Z,1509691289.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:29.986Z,1509691289.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T06:41:29.987Z,1509691289.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:30.356Z,1509691290.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:30.371Z,1509691290.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:30.758Z,1509691290.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:30.779Z,1509691290.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:31.159Z,1509691291.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:31.174Z,1509691291.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:31.556Z,1509691291.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:31.579Z,1509691291.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:31.964Z,1509691291.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:31.983Z,1509691291.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:32.364Z,1509691292.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:32.379Z,1509691292.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:32.764Z,1509691292.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:32.782Z,1509691292.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:33.156Z,1509691293.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:33.179Z,1509691293.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:33.553Z,1509691293.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:33.568Z,1509691293.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:33.956Z,1509691293.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:33.979Z,1509691293.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:34.358Z,1509691294.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:34.373Z,1509691294.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:34.760Z,1509691294.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:34.775Z,1509691294.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:35.164Z,1509691295.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:35.187Z,1509691295.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:35.564Z,1509691295.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:35.579Z,1509691295.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:35.965Z,1509691295.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:35.980Z,1509691295.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:36.357Z,1509691296.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:36.372Z,1509691296.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:36.757Z,1509691296.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:36.772Z,1509691296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:37.161Z,1509691297.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:37.176Z,1509691297.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:37.557Z,1509691297.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:37.573Z,1509691297.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:37.965Z,1509691297.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:37.981Z,1509691297.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:38.366Z,1509691298.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:38.381Z,1509691298.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:38.765Z,1509691298.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:38.779Z,1509691298.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:39.156Z,1509691299.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:39.172Z,1509691299.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:39.553Z,1509691299.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:39.642Z,1509691299.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:39.948Z,1509691299.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:39.979Z,1509691299.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:40.349Z,1509691300.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:40.421Z,1509691300.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:40.744Z,1509691300.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:40.781Z,1509691300.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:41.169Z,1509691301.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:41.230Z,1509691301.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:41.569Z,1509691301.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:41.624Z,1509691301.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:41.974Z,1509691301.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:41.989Z,1509691301.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:42.348Z,1509691302.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:42.378Z,1509691302.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:42.748Z,1509691302.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:42.779Z,1509691302.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:43.146Z,1509691303.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:43.179Z,1509691303.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:43.548Z,1509691303.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:43.583Z,1509691303.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:43.970Z,1509691303.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:43.985Z,1509691303.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:44.374Z,1509691304.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:44.389Z,1509691304.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:44.767Z,1509691304.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:44.787Z,1509691304.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:45.149Z,1509691305.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:45.178Z,1509691305.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:45.544Z,1509691305.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:45.580Z,1509691305.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:45.970Z,1509691305.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:45.985Z,1509691305.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:46.369Z,1509691306.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:46.385Z,1509691306.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:46.774Z,1509691306.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:46.795Z,1509691306.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:47.144Z,1509691307.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:47.175Z,1509691307.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:47.548Z,1509691307.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:47.582Z,1509691307.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:47.944Z,1509691307.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:47.959Z,1509691307.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:48.352Z,1509691308.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:48.381Z,1509691308.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:48.748Z,1509691308.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:48.779Z,1509691308.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:49.174Z,1509691309.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:49.189Z,1509691309.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:49.573Z,1509691309.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:49.591Z,1509691309.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:49.961Z,1509691309.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:49.988Z,1509691309.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:50.351Z,1509691310.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:50.389Z,1509691310.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:50.751Z,1509691310.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:50.785Z,1509691310.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:51.152Z,1509691311.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:51.187Z,1509691311.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:51.551Z,1509691311.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:51.565Z,1509691311.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:51.962Z,1509691311.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:51.987Z,1509691311.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:52.375Z,1509691312.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:52.391Z,1509691312.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:52.761Z,1509691312.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:52.787Z,1509691312.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:53.148Z,1509691313.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:53.163Z,1509691313.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:53.548Z,1509691313.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:53.632Z,1509691313.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:53.944Z,1509691313.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:53.959Z,1509691313.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:54.045Z,1509691314.045 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T06:41:54.346Z,1509691314.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:54.400Z,1509691314.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:54.756Z,1509691314.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:54.771Z,1509691314.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:55.165Z,1509691315.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:55.214Z,1509691315.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:55.565Z,1509691315.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:55.615Z,1509691315.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:55.964Z,1509691315.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:55.979Z,1509691315.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:56.360Z,1509691316.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:56.374Z,1509691316.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:56.759Z,1509691316.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:56.774Z,1509691316.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:57.157Z,1509691317.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:57.172Z,1509691317.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:57.556Z,1509691317.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:57.571Z,1509691317.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:57.964Z,1509691317.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:57.979Z,1509691317.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:58.365Z,1509691318.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:58.380Z,1509691318.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:58.765Z,1509691318.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:58.779Z,1509691318.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:59.159Z,1509691319.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:59.179Z,1509691319.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:59.557Z,1509691319.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:59.572Z,1509691319.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:41:59.958Z,1509691319.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:41:59.972Z,1509691319.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:00.360Z,1509691320.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:00.375Z,1509691320.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:00.757Z,1509691320.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:00.772Z,1509691320.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:01.166Z,1509691321.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:01.180Z,1509691321.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:01.566Z,1509691321.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:01.581Z,1509691321.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:01.964Z,1509691321.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:01.979Z,1509691321.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:02.359Z,1509691322.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:02.374Z,1509691322.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:02.759Z,1509691322.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:02.775Z,1509691322.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:03.157Z,1509691323.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:03.173Z,1509691323.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:03.559Z,1509691323.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:03.579Z,1509691323.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:03.964Z,1509691323.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:03.979Z,1509691323.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:04.364Z,1509691324.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:04.387Z,1509691324.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:04.765Z,1509691324.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:04.782Z,1509691324.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:05.158Z,1509691325.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:05.179Z,1509691325.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:05.556Z,1509691325.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:05.571Z,1509691325.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:05.956Z,1509691325.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:05.971Z,1509691325.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:06.360Z,1509691326.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:06.375Z,1509691326.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:06.760Z,1509691326.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:06.775Z,1509691326.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:09.860Z,1509691329.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:09.955Z,1509691329.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:09.958Z,1509691329.958 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T06:37:09.4Z
2017-11-03T06:42:09.958Z,1509691329.958 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T06:42:09.959Z,1509691329.959 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T06:42:10.086Z,1509691330.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:10.117Z,1509691330.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:10.604Z,1509691330.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:10.659Z,1509691330.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:10.875Z,1509691330.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:10.890Z,1509691330.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:11.274Z,1509691331.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:11.319Z,1509691331.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:11.673Z,1509691331.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:11.713Z,1509691331.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:14.770Z,1509691334.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:14.785Z,1509691334.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:14.904Z,1509691334.904 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171103T001125/Courier0152.lzma
2017-11-03T06:42:14.938Z,1509691334.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:14.971Z,1509691334.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:15.334Z,1509691335.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:15.365Z,1509691335.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:15.699Z,1509691335.699 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0152.lzma.bak
2017-11-03T06:42:15.699Z,1509691335.699 [DataOverHttps](INFO): SBD MOMSN=5182939
2017-11-03T06:42:15.728Z,1509691335.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:15.743Z,1509691335.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:16.346Z,1509691336.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:16.370Z,1509691336.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:16.528Z,1509691336.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:16.543Z,1509691336.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:19.676Z,1509691339.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:19.698Z,1509691339.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:19.866Z,1509691339.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:19.913Z,1509691339.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:20.261Z,1509691340.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:20.276Z,1509691340.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:20.647Z,1509691340.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:20.673Z,1509691340.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:21.043Z,1509691341.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:21.074Z,1509691341.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:21.441Z,1509691341.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:21.456Z,1509691341.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:24.539Z,1509691344.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:24.618Z,1509691344.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:24.737Z,1509691344.737 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20171103T001125/Express0153.lzma
2017-11-03T06:42:24.783Z,1509691344.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:24.817Z,1509691344.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:25.178Z,1509691345.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:25.193Z,1509691345.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:25.535Z,1509691345.535 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0153.lzma.bak
2017-11-03T06:42:25.535Z,1509691345.535 [DataOverHttps](INFO): SBD MOMSN=5182942
2017-11-03T06:42:25.577Z,1509691345.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:25.635Z,1509691345.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:26.183Z,1509691346.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:26.203Z,1509691346.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:26.206Z,1509691346.206 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T06:42:26.206Z,1509691346.206 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T06:42:26.206Z,1509691346.206 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T06:42:26.359Z,1509691346.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:26.430Z,1509691346.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:29.482Z,1509691349.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:29.530Z,1509691349.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:29.680Z,1509691349.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:29.695Z,1509691349.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:30.073Z,1509691350.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:30.091Z,1509691350.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:30.457Z,1509691350.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:30.485Z,1509691350.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:30.855Z,1509691350.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:30.884Z,1509691350.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:31.256Z,1509691351.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:31.282Z,1509691351.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:31.655Z,1509691351.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:31.681Z,1509691351.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:32.078Z,1509691352.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:32.093Z,1509691352.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:32.476Z,1509691352.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:32.491Z,1509691352.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:32.866Z,1509691352.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:32.898Z,1509691352.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:33.250Z,1509691353.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:33.282Z,1509691353.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:33.655Z,1509691353.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:33.682Z,1509691353.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:34.055Z,1509691354.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:34.086Z,1509691354.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:34.451Z,1509691354.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:34.483Z,1509691354.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:34.854Z,1509691354.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:34.871Z,1509691354.871 [PNI_TCM](ERROR): CRC does not match. Expected:0x53806 got:0x16384
2017-11-03T06:42:34.898Z,1509691354.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:35.277Z,1509691355.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:35.293Z,1509691355.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:35.680Z,1509691355.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:35.695Z,1509691355.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:36.075Z,1509691356.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:36.090Z,1509691356.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:36.458Z,1509691356.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:36.483Z,1509691356.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:36.851Z,1509691356.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:36.882Z,1509691356.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:37.253Z,1509691357.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:37.282Z,1509691357.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:37.657Z,1509691357.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:37.683Z,1509691357.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:38.077Z,1509691358.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:38.099Z,1509691358.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:38.472Z,1509691358.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:38.488Z,1509691358.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:38.877Z,1509691358.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:38.892Z,1509691358.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:39.257Z,1509691359.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:39.291Z,1509691359.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:39.654Z,1509691359.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:39.687Z,1509691359.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:40.055Z,1509691360.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:40.081Z,1509691360.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:40.453Z,1509691360.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:40.483Z,1509691360.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:40.854Z,1509691360.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:40.881Z,1509691360.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:41.273Z,1509691361.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:41.289Z,1509691361.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:41.677Z,1509691361.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:41.767Z,1509691361.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:42.083Z,1509691362.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:42.106Z,1509691362.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:42.457Z,1509691362.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:42.514Z,1509691362.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:42.850Z,1509691362.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:42.857Z,1509691362.857 [PNI_TCM](ERROR): CRC does not match. Expected:0x57422 got:0x32768
2017-11-03T06:42:42.891Z,1509691362.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:43.255Z,1509691363.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:43.306Z,1509691363.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:43.652Z,1509691363.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:43.714Z,1509691363.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:44.075Z,1509691364.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:44.091Z,1509691364.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:44.477Z,1509691364.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:44.492Z,1509691364.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:44.861Z,1509691364.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:44.890Z,1509691364.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:45.255Z,1509691365.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:45.291Z,1509691365.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:45.657Z,1509691365.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:45.663Z,1509691365.663 [PNI_TCM](ERROR): CRC does not match. Expected:0x4610 got:0x6593
2017-11-03T06:42:45.691Z,1509691365.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:46.058Z,1509691366.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:46.064Z,1509691366.064 [PNI_TCM](ERROR): CRC does not match. Expected:0x19153 got:0x0
2017-11-03T06:42:46.106Z,1509691366.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:46.455Z,1509691366.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:46.486Z,1509691366.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:46.855Z,1509691366.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:46.891Z,1509691366.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:47.279Z,1509691367.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:47.286Z,1509691367.286 [PNI_TCM](ERROR): CRC does not match. Expected:0x36143 got:0x6593
2017-11-03T06:42:47.310Z,1509691367.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:47.674Z,1509691367.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:47.689Z,1509691367.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:48.074Z,1509691368.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:48.089Z,1509691368.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:48.453Z,1509691368.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:48.490Z,1509691368.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:48.850Z,1509691368.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:48.883Z,1509691368.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:49.256Z,1509691369.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:49.290Z,1509691369.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:49.651Z,1509691369.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:49.666Z,1509691369.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:50.068Z,1509691370.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:50.093Z,1509691370.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:50.467Z,1509691370.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:50.493Z,1509691370.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:50.866Z,1509691370.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:50.898Z,1509691370.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:51.255Z,1509691371.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:51.287Z,1509691371.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:51.652Z,1509691371.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:51.699Z,1509691371.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:52.054Z,1509691372.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:52.070Z,1509691372.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:52.456Z,1509691372.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:52.471Z,1509691372.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:52.859Z,1509691372.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:52.892Z,1509691372.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:53.267Z,1509691373.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:53.291Z,1509691373.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:53.670Z,1509691373.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:53.699Z,1509691373.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:54.065Z,1509691374.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:54.090Z,1509691374.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:54.454Z,1509691374.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:54.494Z,1509691374.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:54.852Z,1509691374.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:54.898Z,1509691374.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:55.254Z,1509691375.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:55.291Z,1509691375.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:55.653Z,1509691375.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:55.674Z,1509691375.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:56.065Z,1509691376.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:56.120Z,1509691376.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:56.467Z,1509691376.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:56.495Z,1509691376.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:56.867Z,1509691376.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:56.896Z,1509691376.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:57.254Z,1509691377.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:57.310Z,1509691377.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:57.654Z,1509691377.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:57.669Z,1509691377.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:58.051Z,1509691378.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:58.110Z,1509691378.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:58.454Z,1509691378.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:58.511Z,1509691378.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:58.854Z,1509691378.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:58.869Z,1509691378.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:59.265Z,1509691379.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:59.309Z,1509691379.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:42:59.671Z,1509691379.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:42:59.698Z,1509691379.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:00.070Z,1509691380.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:00.100Z,1509691380.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:00.459Z,1509691380.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:00.478Z,1509691380.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:00.858Z,1509691380.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:00.873Z,1509691380.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:01.256Z,1509691381.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:01.302Z,1509691381.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:01.658Z,1509691381.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:01.664Z,1509691381.664 [PNI_TCM](ERROR): CRC does not match. Expected:0x13944 got:0x7489
2017-11-03T06:43:01.700Z,1509691381.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:02.062Z,1509691382.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:02.077Z,1509691382.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:02.469Z,1509691382.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:02.500Z,1509691382.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:02.871Z,1509691382.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:02.898Z,1509691382.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:03.256Z,1509691383.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:03.284Z,1509691383.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:03.659Z,1509691383.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:03.679Z,1509691383.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:04.060Z,1509691384.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:04.075Z,1509691384.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:04.461Z,1509691384.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:04.478Z,1509691384.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:04.860Z,1509691384.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:04.875Z,1509691384.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:04.964Z,1509691384.964 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:43:04.965Z,1509691384.965 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T06:43:05.237Z,1509691385.237 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:43:05.237Z,1509691385.237 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:43:05.237Z,1509691385.237 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:43:05.238Z,1509691385.238 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:43:05.292Z,1509691385.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:05.307Z,1509691385.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:05.677Z,1509691385.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:05.707Z,1509691385.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:06.064Z,1509691386.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:06.080Z,1509691386.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:06.464Z,1509691386.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:06.479Z,1509691386.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:06.867Z,1509691386.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:06.882Z,1509691386.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:07.262Z,1509691387.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:07.283Z,1509691387.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:07.673Z,1509691387.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:07.728Z,1509691387.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:08.075Z,1509691388.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:08.107Z,1509691388.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:08.479Z,1509691388.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:08.505Z,1509691388.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:08.874Z,1509691388.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:08.908Z,1509691388.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:09.261Z,1509691389.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:09.319Z,1509691389.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:09.480Z,1509691389.480 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:43:09.535Z,1509691389.535 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:43:09.536Z,1509691389.536 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:43:09.537Z,1509691389.537 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:43:09.538Z,1509691389.538 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:43:09.667Z,1509691389.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:09.713Z,1509691389.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:10.065Z,1509691390.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:10.096Z,1509691390.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:10.500Z,1509691390.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:10.618Z,1509691390.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:10.852Z,1509691390.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:10.891Z,1509691390.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:11.277Z,1509691391.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:11.293Z,1509691391.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:11.678Z,1509691391.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:11.730Z,1509691391.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:12.072Z,1509691392.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:12.088Z,1509691392.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:12.453Z,1509691392.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:12.519Z,1509691392.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:12.850Z,1509691392.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:12.879Z,1509691392.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:13.256Z,1509691393.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:13.323Z,1509691393.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:13.655Z,1509691393.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:13.681Z,1509691393.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:14.078Z,1509691394.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:14.093Z,1509691394.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:14.475Z,1509691394.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:14.495Z,1509691394.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:14.874Z,1509691394.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:14.889Z,1509691394.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:15.255Z,1509691395.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:15.281Z,1509691395.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:15.652Z,1509691395.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:15.690Z,1509691395.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:16.053Z,1509691396.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:16.081Z,1509691396.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:16.452Z,1509691396.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:16.478Z,1509691396.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:16.892Z,1509691396.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:16.925Z,1509691396.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:17.282Z,1509691397.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:17.297Z,1509691397.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:17.677Z,1509691397.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:17.692Z,1509691397.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:18.070Z,1509691398.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:18.085Z,1509691398.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:18.455Z,1509691398.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:18.481Z,1509691398.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:18.855Z,1509691398.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:18.885Z,1509691398.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:19.256Z,1509691399.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:19.282Z,1509691399.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:19.655Z,1509691399.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:19.680Z,1509691399.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:20.073Z,1509691400.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:20.088Z,1509691400.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:20.477Z,1509691400.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:20.492Z,1509691400.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:20.876Z,1509691400.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:20.891Z,1509691400.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:21.267Z,1509691401.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:21.282Z,1509691401.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:21.655Z,1509691401.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:21.680Z,1509691401.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:22.077Z,1509691402.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:22.092Z,1509691402.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:22.466Z,1509691402.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:22.487Z,1509691402.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:22.855Z,1509691402.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:22.881Z,1509691402.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:23.277Z,1509691403.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:23.292Z,1509691403.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:23.681Z,1509691403.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:23.696Z,1509691403.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:24.090Z,1509691404.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:24.124Z,1509691404.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:24.456Z,1509691404.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:24.483Z,1509691404.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:24.855Z,1509691404.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:24.932Z,1509691404.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:25.253Z,1509691405.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:25.331Z,1509691405.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:25.655Z,1509691405.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:25.682Z,1509691405.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:26.078Z,1509691406.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:26.131Z,1509691406.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:26.484Z,1509691406.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:26.503Z,1509691406.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:26.882Z,1509691406.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:26.931Z,1509691406.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:30.131Z,1509691410.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:30.187Z,1509691410.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:30.297Z,1509691410.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:30.342Z,1509691410.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:30.726Z,1509691410.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:30.741Z,1509691410.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:31.126Z,1509691411.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:31.141Z,1509691411.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:31.521Z,1509691411.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:31.537Z,1509691411.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:31.908Z,1509691411.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:31.933Z,1509691411.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:32.298Z,1509691412.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:32.326Z,1509691412.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:32.701Z,1509691412.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:32.732Z,1509691412.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:33.110Z,1509691413.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:33.144Z,1509691413.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:33.511Z,1509691413.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:33.537Z,1509691413.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:33.923Z,1509691413.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:33.938Z,1509691413.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:34.301Z,1509691414.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:34.333Z,1509691414.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:34.701Z,1509691414.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:34.715Z,1509691414.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:35.106Z,1509691415.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:35.137Z,1509691415.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:35.503Z,1509691415.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:35.517Z,1509691415.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:35.943Z,1509691415.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:35.958Z,1509691415.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:36.318Z,1509691416.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:36.341Z,1509691416.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:36.718Z,1509691416.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:36.741Z,1509691416.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:37.101Z,1509691417.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:37.118Z,1509691417.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:37.500Z,1509691417.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:37.516Z,1509691417.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:37.914Z,1509691417.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:37.941Z,1509691417.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:38.318Z,1509691418.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:38.339Z,1509691418.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:38.714Z,1509691418.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:38.739Z,1509691418.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:39.101Z,1509691419.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:39.116Z,1509691419.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:39.500Z,1509691419.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:39.516Z,1509691419.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:39.918Z,1509691419.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:39.947Z,1509691419.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:40.339Z,1509691420.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:40.406Z,1509691420.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:40.714Z,1509691420.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:40.737Z,1509691420.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:41.101Z,1509691421.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:41.117Z,1509691421.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:41.500Z,1509691421.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:41.516Z,1509691421.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:41.914Z,1509691421.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:41.963Z,1509691421.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:42.356Z,1509691422.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:42.445Z,1509691422.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:42.718Z,1509691422.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:42.749Z,1509691422.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:43.100Z,1509691423.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:43.155Z,1509691423.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:43.504Z,1509691423.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:43.519Z,1509691423.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:43.925Z,1509691423.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:43.975Z,1509691423.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:44.322Z,1509691424.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:44.390Z,1509691424.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:44.718Z,1509691424.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:44.748Z,1509691424.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:45.105Z,1509691425.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:45.119Z,1509691425.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:45.500Z,1509691425.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:45.515Z,1509691425.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:45.921Z,1509691425.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:45.945Z,1509691425.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:46.318Z,1509691426.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:46.353Z,1509691426.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:46.718Z,1509691426.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:46.749Z,1509691426.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:47.105Z,1509691427.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:47.120Z,1509691427.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:47.504Z,1509691427.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:47.519Z,1509691427.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:47.926Z,1509691427.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:47.947Z,1509691427.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:48.318Z,1509691428.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:48.357Z,1509691428.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:48.721Z,1509691428.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:48.753Z,1509691428.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:49.109Z,1509691429.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:49.123Z,1509691429.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:49.506Z,1509691429.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:49.525Z,1509691429.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:49.933Z,1509691429.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:49.963Z,1509691429.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:50.310Z,1509691430.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:50.325Z,1509691430.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:50.714Z,1509691430.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:50.729Z,1509691430.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:51.109Z,1509691431.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:51.124Z,1509691431.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:51.509Z,1509691431.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:51.524Z,1509691431.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:51.914Z,1509691431.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:51.929Z,1509691431.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:52.314Z,1509691432.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:52.329Z,1509691432.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:52.722Z,1509691432.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:52.757Z,1509691432.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:53.108Z,1509691433.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:53.123Z,1509691433.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:53.508Z,1509691433.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:53.524Z,1509691433.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:53.922Z,1509691433.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:53.954Z,1509691433.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:54.351Z,1509691434.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:54.398Z,1509691434.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:54.717Z,1509691434.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:54.732Z,1509691434.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:55.112Z,1509691435.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:55.127Z,1509691435.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:55.508Z,1509691435.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:55.523Z,1509691435.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:55.918Z,1509691435.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:55.933Z,1509691435.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:56.331Z,1509691436.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:56.449Z,1509691436.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:56.721Z,1509691436.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:56.736Z,1509691436.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:57.100Z,1509691437.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:57.157Z,1509691437.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:57.511Z,1509691437.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:57.531Z,1509691437.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:57.916Z,1509691437.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:57.971Z,1509691437.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:58.325Z,1509691438.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:58.374Z,1509691438.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:58.717Z,1509691438.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:58.732Z,1509691438.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:59.110Z,1509691439.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:43:59.131Z,1509691439.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:59.527Z,1509691439.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:43:59.936Z,1509691439.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:00.336Z,1509691440.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:00.722Z,1509691440.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:00.737Z,1509691440.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:01.112Z,1509691441.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:01.127Z,1509691441.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:01.508Z,1509691441.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:01.530Z,1509691441.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:01.926Z,1509691441.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:01.941Z,1509691441.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:02.321Z,1509691442.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:02.343Z,1509691442.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:02.725Z,1509691442.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:02.740Z,1509691442.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:03.111Z,1509691443.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:03.126Z,1509691443.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:03.512Z,1509691443.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:03.527Z,1509691443.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:03.930Z,1509691443.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:03.945Z,1509691443.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:04.323Z,1509691444.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:04.338Z,1509691444.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:04.726Z,1509691444.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:04.741Z,1509691444.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:05.113Z,1509691445.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:05.128Z,1509691445.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:05.499Z,1509691445.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:05.535Z,1509691445.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:05.922Z,1509691445.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:05.937Z,1509691445.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:06.321Z,1509691446.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T06:44:06.337Z,1509691446.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:06.740Z,1509691446.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:07.125Z,1509691447.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:07.527Z,1509691447.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:07.938Z,1509691447.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:08.400Z,1509691448.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:08.737Z,1509691448.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:09.127Z,1509691449.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:09.531Z,1509691449.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:09.937Z,1509691449.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:10.457Z,1509691450.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:10.737Z,1509691450.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:11.133Z,1509691451.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:11.133Z,1509691451.133 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 130
2017-11-03T06:44:11.133Z,1509691451.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:44:11.135Z,1509691451.135 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:11.135Z,1509691451.135 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 130
2017-11-03T06:44:11.135Z,1509691451.135 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:44:11.141Z,1509691451.141 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:11.141Z,1509691451.141 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 130
2017-11-03T06:44:11.141Z,1509691451.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:44:11.224Z,1509691451.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:44:11.224Z,1509691451.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:44:11.225Z,1509691451.225 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:44:11.636Z,1509691451.636 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:44:11.637Z,1509691451.637 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 130
2017-11-03T06:44:11.637Z,1509691451.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:44:11.637Z,1509691451.637 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 130
2017-11-03T06:44:11.638Z,1509691451.638 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:44:11.638Z,1509691451.638 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 130
2017-11-03T06:44:11.949Z,1509691451.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:44:11.950Z,1509691451.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:44:11.950Z,1509691451.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:44:11.951Z,1509691451.951 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:44:11.951Z,1509691451.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:44:11.951Z,1509691451.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:44:11.952Z,1509691451.952 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:44:11.952Z,1509691451.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:44:11.953Z,1509691451.953 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:44:12.393Z,1509691452.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:12.742Z,1509691452.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:13.151Z,1509691453.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:13.519Z,1509691453.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:13.952Z,1509691453.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:14.342Z,1509691454.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:14.740Z,1509691454.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:15.120Z,1509691455.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:15.514Z,1509691455.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:15.952Z,1509691455.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:16.347Z,1509691456.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:16.742Z,1509691456.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:17.121Z,1509691457.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:17.521Z,1509691457.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:17.960Z,1509691457.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:18.340Z,1509691458.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:18.744Z,1509691458.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:19.116Z,1509691459.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:19.529Z,1509691459.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:19.943Z,1509691459.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:20.336Z,1509691460.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:20.736Z,1509691460.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:21.128Z,1509691461.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:21.525Z,1509691461.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:21.936Z,1509691461.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:22.403Z,1509691462.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:22.736Z,1509691462.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:23.127Z,1509691463.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:23.529Z,1509691463.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:23.936Z,1509691463.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:24.405Z,1509691464.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:24.742Z,1509691464.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:25.170Z,1509691465.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:25.566Z,1509691465.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:25.924Z,1509691465.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:26.348Z,1509691466.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:26.771Z,1509691466.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:27.120Z,1509691467.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:30.447Z,1509691470.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:30.651Z,1509691470.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:31.023Z,1509691471.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:31.420Z,1509691471.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:31.811Z,1509691471.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:32.217Z,1509691472.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:32.608Z,1509691472.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:33.017Z,1509691473.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:33.421Z,1509691473.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:33.823Z,1509691473.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:34.207Z,1509691474.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:34.609Z,1509691474.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:35.011Z,1509691475.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:35.411Z,1509691475.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:35.806Z,1509691475.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:36.216Z,1509691476.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:36.617Z,1509691476.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:37.017Z,1509691477.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:37.415Z,1509691477.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:37.807Z,1509691477.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:38.210Z,1509691478.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:38.604Z,1509691478.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:39.017Z,1509691479.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:39.421Z,1509691479.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:39.867Z,1509691479.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:40.206Z,1509691480.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:40.608Z,1509691480.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:41.008Z,1509691481.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:41.406Z,1509691481.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:41.875Z,1509691481.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:42.223Z,1509691482.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:42.659Z,1509691482.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:43.074Z,1509691483.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:43.416Z,1509691483.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:43.895Z,1509691483.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:44.195Z,1509691484.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:44.623Z,1509691484.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:45.057Z,1509691485.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:45.421Z,1509691485.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:45.881Z,1509691485.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:46.195Z,1509691486.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:46.595Z,1509691486.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:46.995Z,1509691486.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:47.396Z,1509691487.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:47.797Z,1509691487.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:48.235Z,1509691488.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:48.621Z,1509691488.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:49.022Z,1509691489.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:49.395Z,1509691489.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:49.795Z,1509691489.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:50.195Z,1509691490.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:50.619Z,1509691490.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:51.019Z,1509691491.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:51.422Z,1509691491.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:51.820Z,1509691491.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:52.195Z,1509691492.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:52.599Z,1509691492.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:53.019Z,1509691493.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:53.402Z,1509691493.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:53.875Z,1509691493.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:54.269Z,1509691494.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:54.623Z,1509691494.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:55.023Z,1509691495.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:55.395Z,1509691495.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:55.871Z,1509691495.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:56.207Z,1509691496.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:56.611Z,1509691496.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:57.012Z,1509691497.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:57.482Z,1509691497.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:57.871Z,1509691497.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:58.242Z,1509691498.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:58.605Z,1509691498.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:59.042Z,1509691499.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:59.443Z,1509691499.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:44:59.807Z,1509691499.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:00.225Z,1509691500.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:00.617Z,1509691500.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:01.013Z,1509691501.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:01.409Z,1509691501.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:01.808Z,1509691501.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:02.213Z,1509691502.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:02.611Z,1509691502.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:03.017Z,1509691503.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:03.421Z,1509691503.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:03.816Z,1509691503.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:04.211Z,1509691504.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:04.608Z,1509691504.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:05.008Z,1509691505.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:05.407Z,1509691505.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:05.807Z,1509691505.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:05.956Z,1509691505.956 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:45:05.956Z,1509691505.956 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T06:45:05.956Z,1509691505.956 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:45:06.222Z,1509691506.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:45:06.223Z,1509691506.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:06.312Z,1509691506.312 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:45:06.361Z,1509691506.361 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:45:06.469Z,1509691506.469 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:45:06.618Z,1509691506.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:45:06.619Z,1509691506.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:07.022Z,1509691507.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:45:07.023Z,1509691507.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:07.408Z,1509691507.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:45:07.409Z,1509691507.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:07.813Z,1509691507.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:45:07.814Z,1509691507.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:07.909Z,1509691507.909 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:45:07.909Z,1509691507.909 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T06:45:08.084Z,1509691508.084 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:45:08.085Z,1509691508.085 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:45:08.085Z,1509691508.085 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:45:08.085Z,1509691508.085 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:45:08.208Z,1509691508.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:45:08.209Z,1509691508.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:08.606Z,1509691508.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:45:08.607Z,1509691508.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:09.016Z,1509691509.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:45:09.017Z,1509691509.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:09.422Z,1509691509.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:45:09.423Z,1509691509.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:09.817Z,1509691509.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:45:09.818Z,1509691509.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:10.207Z,1509691510.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:45:10.208Z,1509691510.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:10.604Z,1509691510.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:45:10.605Z,1509691510.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:11.012Z,1509691511.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:45:11.017Z,1509691511.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:11.473Z,1509691511.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T06:45:11.474Z,1509691511.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:11.814Z,1509691511.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:45:11.815Z,1509691511.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:12.271Z,1509691512.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T06:45:12.276Z,1509691512.276 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:45:12.289Z,1509691512.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:12.383Z,1509691512.383 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:45:12.384Z,1509691512.384 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:45:12.385Z,1509691512.385 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:45:12.385Z,1509691512.385 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:45:12.651Z,1509691512.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:45:12.674Z,1509691512.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:13.073Z,1509691513.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:13.423Z,1509691513.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:13.835Z,1509691513.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:14.196Z,1509691514.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:14.607Z,1509691514.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:15.031Z,1509691515.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:15.428Z,1509691515.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:15.809Z,1509691515.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:16.202Z,1509691516.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:16.605Z,1509691516.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:17.001Z,1509691517.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:17.404Z,1509691517.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:17.801Z,1509691517.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:18.208Z,1509691518.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:18.612Z,1509691518.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:19.039Z,1509691519.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:19.459Z,1509691519.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:19.803Z,1509691519.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:20.205Z,1509691520.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:20.611Z,1509691520.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:21.015Z,1509691521.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:21.417Z,1509691521.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:21.816Z,1509691521.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:22.203Z,1509691522.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:22.605Z,1509691522.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:23.013Z,1509691523.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:23.404Z,1509691523.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:23.810Z,1509691523.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:24.215Z,1509691524.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:24.619Z,1509691524.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:25.021Z,1509691525.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:25.411Z,1509691525.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:25.851Z,1509691525.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:26.204Z,1509691526.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:26.646Z,1509691526.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:27.015Z,1509691527.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:27.451Z,1509691527.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:30.751Z,1509691530.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:30.959Z,1509691530.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:31.307Z,1509691531.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:31.706Z,1509691531.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:32.112Z,1509691532.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:32.523Z,1509691532.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:32.912Z,1509691532.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:33.302Z,1509691533.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:33.699Z,1509691533.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:34.111Z,1509691534.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:34.507Z,1509691534.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:35.006Z,1509691535.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:35.367Z,1509691535.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:35.716Z,1509691535.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:36.113Z,1509691536.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:36.507Z,1509691536.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:36.903Z,1509691536.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:37.356Z,1509691537.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:37.708Z,1509691537.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:38.117Z,1509691538.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:38.515Z,1509691538.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:38.919Z,1509691538.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:39.292Z,1509691539.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:39.713Z,1509691539.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:40.096Z,1509691540.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:40.493Z,1509691540.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:40.918Z,1509691540.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:41.320Z,1509691541.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:41.720Z,1509691541.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:42.120Z,1509691542.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:42.527Z,1509691542.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:42.921Z,1509691542.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:43.299Z,1509691543.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:43.691Z,1509691543.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:44.123Z,1509691544.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:44.523Z,1509691544.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:44.961Z,1509691544.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:45.291Z,1509691545.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:45.693Z,1509691545.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:46.087Z,1509691546.087 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:45:46.087Z,1509691546.087 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:45:46.088Z,1509691546.088 [BPC1](ERROR): Communications Fault
2017-11-03T06:45:46.096Z,1509691546.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:46.208Z,1509691546.208 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:45:46.499Z,1509691546.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:46.899Z,1509691546.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:47.321Z,1509691547.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:47.421Z,1509691547.421 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:45:47.421Z,1509691547.421 [BPC1] No Fault, FailCount= 1
2017-11-03T06:45:47.771Z,1509691547.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:48.125Z,1509691548.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:48.499Z,1509691548.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:48.924Z,1509691548.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:49.391Z,1509691549.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:49.703Z,1509691549.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:50.111Z,1509691550.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:50.508Z,1509691550.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:50.908Z,1509691550.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:51.362Z,1509691551.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:51.703Z,1509691551.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:52.107Z,1509691552.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:52.503Z,1509691552.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:52.905Z,1509691552.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:53.307Z,1509691553.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:53.711Z,1509691553.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:54.109Z,1509691554.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:54.503Z,1509691554.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:54.903Z,1509691554.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:55.301Z,1509691555.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:55.756Z,1509691555.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:56.120Z,1509691556.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:56.557Z,1509691556.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:56.958Z,1509691556.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:57.320Z,1509691557.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:57.713Z,1509691557.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:58.113Z,1509691558.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:58.513Z,1509691558.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:58.927Z,1509691558.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:59.330Z,1509691559.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:45:59.770Z,1509691559.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:00.129Z,1509691560.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:00.520Z,1509691560.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:00.919Z,1509691560.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:01.346Z,1509691561.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:01.720Z,1509691561.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:02.158Z,1509691562.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:02.562Z,1509691562.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:02.935Z,1509691562.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:03.370Z,1509691563.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:03.777Z,1509691563.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:04.111Z,1509691564.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:04.536Z,1509691564.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:04.915Z,1509691564.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:05.397Z,1509691565.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:05.711Z,1509691565.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:06.139Z,1509691566.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:06.510Z,1509691566.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:06.943Z,1509691566.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:07.307Z,1509691567.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:07.699Z,1509691567.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:08.125Z,1509691568.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:08.543Z,1509691568.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:08.915Z,1509691568.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:09.309Z,1509691569.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:09.720Z,1509691569.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:10.122Z,1509691570.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:10.511Z,1509691570.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:10.913Z,1509691570.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:11.312Z,1509691571.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:11.716Z,1509691571.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:12.119Z,1509691572.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:12.504Z,1509691572.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:12.953Z,1509691572.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:13.335Z,1509691573.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:13.710Z,1509691573.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:14.123Z,1509691574.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:14.519Z,1509691574.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:14.916Z,1509691574.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:15.340Z,1509691575.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:15.723Z,1509691575.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:16.123Z,1509691576.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:16.497Z,1509691576.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:16.930Z,1509691576.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:17.418Z,1509691577.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:17.721Z,1509691577.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:18.119Z,1509691578.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:18.495Z,1509691578.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:18.891Z,1509691578.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:19.398Z,1509691579.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:19.706Z,1509691579.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:20.111Z,1509691580.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:20.515Z,1509691580.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:20.908Z,1509691580.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:21.304Z,1509691581.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:21.702Z,1509691581.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:22.103Z,1509691582.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:22.501Z,1509691582.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:22.907Z,1509691582.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:23.315Z,1509691583.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:23.709Z,1509691583.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:24.114Z,1509691584.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:24.504Z,1509691584.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:24.903Z,1509691584.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:25.302Z,1509691585.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:25.707Z,1509691585.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:26.109Z,1509691586.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:26.507Z,1509691586.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:26.946Z,1509691586.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:27.302Z,1509691587.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:27.709Z,1509691587.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:30.969Z,1509691590.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:31.134Z,1509691591.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:31.534Z,1509691591.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:31.975Z,1509691591.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:32.325Z,1509691592.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:32.750Z,1509691592.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:33.150Z,1509691593.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:33.524Z,1509691593.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:33.931Z,1509691593.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:34.330Z,1509691594.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:34.735Z,1509691594.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:35.114Z,1509691595.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:35.503Z,1509691595.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:35.935Z,1509691595.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:36.337Z,1509691596.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:36.716Z,1509691596.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:37.119Z,1509691597.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:37.518Z,1509691597.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:37.937Z,1509691597.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:38.317Z,1509691598.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:38.737Z,1509691598.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:39.117Z,1509691599.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:39.521Z,1509691599.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:39.921Z,1509691599.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:40.335Z,1509691600.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:40.725Z,1509691600.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:41.120Z,1509691601.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:41.515Z,1509691601.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:41.924Z,1509691601.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:42.324Z,1509691602.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:42.731Z,1509691602.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:43.126Z,1509691603.126 [BPC1](ERROR): Failed to parse message.
2017-11-03T06:46:43.126Z,1509691603.126 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T06:46:43.126Z,1509691603.126 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:46:43.127Z,1509691603.127 [BPC1](ERROR): Data Fault
2017-11-03T06:46:43.135Z,1509691603.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:43.241Z,1509691603.241 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:46:43.523Z,1509691603.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:43.929Z,1509691603.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:44.325Z,1509691604.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:44.408Z,1509691604.408 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:46:44.408Z,1509691604.408 [BPC1] No Fault, FailCount= 1
2017-11-03T06:46:44.843Z,1509691604.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:45.118Z,1509691605.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:45.515Z,1509691605.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:45.966Z,1509691605.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:46.318Z,1509691606.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:46.724Z,1509691606.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:47.113Z,1509691607.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:47.511Z,1509691607.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:47.924Z,1509691607.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:48.325Z,1509691608.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:48.728Z,1509691608.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:49.135Z,1509691609.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:49.507Z,1509691609.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:49.902Z,1509691609.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:50.326Z,1509691610.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:50.702Z,1509691610.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:51.135Z,1509691611.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:51.525Z,1509691611.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:51.926Z,1509691611.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:52.327Z,1509691612.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:52.703Z,1509691612.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:53.125Z,1509691613.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:53.526Z,1509691613.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:53.925Z,1509691613.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:54.328Z,1509691614.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:54.725Z,1509691614.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:55.125Z,1509691615.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:55.526Z,1509691615.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:55.931Z,1509691615.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:56.331Z,1509691616.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:56.776Z,1509691616.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:57.141Z,1509691617.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:57.504Z,1509691617.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:57.958Z,1509691617.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:58.330Z,1509691618.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:58.731Z,1509691618.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:59.151Z,1509691619.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:59.530Z,1509691619.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:46:59.963Z,1509691619.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:00.339Z,1509691620.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:00.763Z,1509691620.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:01.108Z,1509691621.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:01.532Z,1509691621.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:01.929Z,1509691621.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:02.335Z,1509691622.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:02.734Z,1509691622.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:03.108Z,1509691623.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:03.507Z,1509691623.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:03.937Z,1509691623.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:04.338Z,1509691624.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:04.717Z,1509691624.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:05.113Z,1509691625.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:05.513Z,1509691625.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:05.923Z,1509691625.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:06.331Z,1509691626.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:06.723Z,1509691626.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:07.111Z,1509691627.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:07.514Z,1509691627.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:07.924Z,1509691627.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:08.324Z,1509691628.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:08.456Z,1509691628.456 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:47:08.456Z,1509691628.456 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T06:47:08.456Z,1509691628.456 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:47:08.727Z,1509691628.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:47:08.729Z,1509691628.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:08.847Z,1509691628.847 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:47:08.861Z,1509691628.861 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:47:08.990Z,1509691628.990 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:47:09.121Z,1509691629.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:47:09.122Z,1509691629.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:09.513Z,1509691629.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:47:09.514Z,1509691629.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:09.929Z,1509691629.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:47:09.930Z,1509691629.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:10.327Z,1509691630.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:47:10.328Z,1509691630.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:10.420Z,1509691630.420 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:47:10.421Z,1509691630.421 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T06:47:10.605Z,1509691630.605 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:47:10.605Z,1509691630.605 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:47:10.605Z,1509691630.605 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:47:10.605Z,1509691630.605 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:47:10.725Z,1509691630.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:47:10.726Z,1509691630.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:11.118Z,1509691631.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:47:11.119Z,1509691631.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:11.558Z,1509691631.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:47:11.559Z,1509691631.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:11.969Z,1509691631.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:47:11.970Z,1509691631.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:11.971Z,1509691631.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 131
2017-11-03T06:47:11.971Z,1509691631.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:47:11.977Z,1509691631.977 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:11.977Z,1509691631.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 131
2017-11-03T06:47:11.977Z,1509691631.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:47:11.979Z,1509691631.979 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:11.979Z,1509691631.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 131
2017-11-03T06:47:11.979Z,1509691631.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:47:12.065Z,1509691632.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:47:12.065Z,1509691632.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:47:12.065Z,1509691632.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:47:12.420Z,1509691632.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:47:12.420Z,1509691632.420 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 131
2017-11-03T06:47:12.421Z,1509691632.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:47:12.421Z,1509691632.421 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 131
2017-11-03T06:47:12.421Z,1509691632.421 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:47:12.421Z,1509691632.421 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 131
2017-11-03T06:47:12.730Z,1509691632.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:47:12.730Z,1509691632.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:47:12.730Z,1509691632.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:47:12.731Z,1509691632.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:47:12.731Z,1509691632.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:47:12.732Z,1509691632.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:47:12.732Z,1509691632.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:47:12.733Z,1509691632.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:47:12.733Z,1509691632.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:47:13.158Z,1509691633.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:47:13.159Z,1509691633.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:13.510Z,1509691633.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:47:13.511Z,1509691633.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:13.950Z,1509691633.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:47:13.951Z,1509691633.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:14.375Z,1509691634.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T06:47:14.377Z,1509691634.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:14.750Z,1509691634.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:47:14.751Z,1509691634.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:14.889Z,1509691634.889 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:47:14.947Z,1509691634.947 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:47:14.948Z,1509691634.948 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:47:14.949Z,1509691634.949 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:47:14.949Z,1509691634.949 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:47:15.116Z,1509691635.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:47:15.117Z,1509691635.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:15.513Z,1509691635.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:15.941Z,1509691635.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:16.321Z,1509691636.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:16.717Z,1509691636.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:17.117Z,1509691637.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:17.514Z,1509691637.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:17.917Z,1509691637.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:18.321Z,1509691638.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:18.717Z,1509691638.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:19.114Z,1509691639.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:19.513Z,1509691639.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:19.916Z,1509691639.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:20.316Z,1509691640.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:20.721Z,1509691640.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:21.119Z,1509691641.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:21.542Z,1509691641.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:21.919Z,1509691641.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:22.325Z,1509691642.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:22.731Z,1509691642.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:23.113Z,1509691643.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:23.519Z,1509691643.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:23.924Z,1509691643.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:24.324Z,1509691644.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:24.727Z,1509691644.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:25.175Z,1509691645.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:25.523Z,1509691645.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:25.954Z,1509691645.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:26.331Z,1509691646.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:26.811Z,1509691646.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:26.819Z,1509691646.819 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T06:47:26.819Z,1509691646.819 [Default:CheckIn:C.Wait] Stopped
2017-11-03T06:47:26.819Z,1509691646.819 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T06:47:26.819Z,1509691646.819 [Default:CheckIn:D] Running Loop=1
2017-11-03T06:47:27.157Z,1509691647.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:27.161Z,1509691647.161 [Default:CheckIn:D] Stopped
2017-11-03T06:47:27.161Z,1509691647.161 [Default:CheckIn:E] Running Loop=1
2017-11-03T06:47:27.523Z,1509691647.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:27.526Z,1509691647.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 392.326563 min 
2017-11-03T06:47:27.526Z,1509691647.526 [Default:CheckIn:E] Stopped
2017-11-03T06:47:27.527Z,1509691647.527 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T06:47:27.527Z,1509691647.527 [Default:CheckIn] Stopped
2017-11-03T06:47:27.527Z,1509691647.527 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T06:47:27.527Z,1509691647.527 [Default:CheckIn](INFO): Running loop #39
2017-11-03T06:47:27.527Z,1509691647.527 [Default:CheckIn] Running Loop=39
2017-11-03T06:47:27.527Z,1509691647.527 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T06:47:27.527Z,1509691647.527 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T06:47:27.927Z,1509691647.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:31.195Z,1509691651.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:31.372Z,1509691651.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:31.757Z,1509691651.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:32.159Z,1509691652.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:32.555Z,1509691652.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:32.965Z,1509691652.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:33.365Z,1509691653.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:33.761Z,1509691653.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:34.161Z,1509691654.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:34.559Z,1509691654.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:34.961Z,1509691654.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:35.376Z,1509691655.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:35.765Z,1509691655.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:36.159Z,1509691656.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:36.567Z,1509691656.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:36.973Z,1509691656.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:37.471Z,1509691657.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:37.769Z,1509691657.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:38.187Z,1509691658.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:38.560Z,1509691658.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:38.978Z,1509691658.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:39.419Z,1509691659.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:39.769Z,1509691659.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:40.208Z,1509691660.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:40.607Z,1509691660.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:40.971Z,1509691660.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:41.379Z,1509691661.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:41.779Z,1509691661.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:42.161Z,1509691662.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:42.561Z,1509691662.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:42.968Z,1509691662.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:43.369Z,1509691663.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:43.766Z,1509691663.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:44.161Z,1509691664.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:44.563Z,1509691664.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:44.974Z,1509691664.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:45.367Z,1509691665.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:45.770Z,1509691665.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:46.163Z,1509691666.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:46.561Z,1509691666.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:46.967Z,1509691666.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:47.370Z,1509691667.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:47.773Z,1509691667.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:48.159Z,1509691668.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:48.562Z,1509691668.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:48.973Z,1509691668.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:49.387Z,1509691669.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:49.773Z,1509691669.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:50.167Z,1509691670.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:50.536Z,1509691670.536 [BPC1](ERROR): Failed to parse message.
2017-11-03T06:47:50.536Z,1509691670.536 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:47:50.537Z,1509691670.537 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:47:50.537Z,1509691670.537 [BPC1](ERROR): Data Fault
2017-11-03T06:47:50.545Z,1509691670.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:50.659Z,1509691670.659 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:47:50.975Z,1509691670.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:51.423Z,1509691671.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:51.775Z,1509691671.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:51.861Z,1509691671.861 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:47:51.861Z,1509691671.861 [BPC1] No Fault, FailCount= 1
2017-11-03T06:47:52.214Z,1509691672.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:52.547Z,1509691672.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:53.003Z,1509691673.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:53.424Z,1509691673.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:53.775Z,1509691673.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:54.149Z,1509691674.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:54.546Z,1509691674.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:54.967Z,1509691674.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:55.375Z,1509691675.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:55.774Z,1509691675.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:56.151Z,1509691676.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:56.547Z,1509691676.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:56.971Z,1509691676.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:57.371Z,1509691677.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:57.775Z,1509691677.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:58.150Z,1509691678.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:58.547Z,1509691678.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:58.975Z,1509691678.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:59.378Z,1509691679.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:47:59.771Z,1509691679.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:00.147Z,1509691680.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:00.547Z,1509691680.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:00.982Z,1509691680.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:01.375Z,1509691681.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:01.774Z,1509691681.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:02.171Z,1509691682.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:02.547Z,1509691682.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:02.977Z,1509691682.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:03.407Z,1509691683.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:03.811Z,1509691683.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:04.156Z,1509691684.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:04.599Z,1509691684.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:04.981Z,1509691684.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:05.447Z,1509691685.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:05.799Z,1509691685.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:06.156Z,1509691686.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:06.571Z,1509691686.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:06.981Z,1509691686.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:07.414Z,1509691687.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:07.761Z,1509691687.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:08.156Z,1509691688.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:08.555Z,1509691688.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:08.959Z,1509691688.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:09.361Z,1509691689.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:09.760Z,1509691689.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:10.158Z,1509691690.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:10.556Z,1509691690.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:11.008Z,1509691691.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:11.361Z,1509691691.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:11.761Z,1509691691.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:12.156Z,1509691692.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:12.558Z,1509691692.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:12.967Z,1509691692.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:13.361Z,1509691693.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:13.761Z,1509691693.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:14.157Z,1509691694.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:14.556Z,1509691694.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:14.914Z,1509691694.914 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T06:48:14.914Z,1509691694.914 [NAL9602] Data Fault, FailCount= 1
2017-11-03T06:48:14.914Z,1509691694.914 [NAL9602](ERROR): Data Fault
2017-11-03T06:48:14.963Z,1509691694.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:15.060Z,1509691695.060 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T06:48:15.315Z,1509691695.315 [NAL9602](INFO): Powering down
2017-11-03T06:48:15.365Z,1509691695.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:15.760Z,1509691695.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:16.158Z,1509691696.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:16.244Z,1509691696.244 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T06:48:16.244Z,1509691696.244 [NAL9602] No Fault, FailCount= 1
2017-11-03T06:48:16.603Z,1509691696.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:16.959Z,1509691696.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:17.369Z,1509691697.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:17.791Z,1509691697.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:18.159Z,1509691698.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:18.586Z,1509691698.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:18.991Z,1509691698.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:19.409Z,1509691699.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:19.752Z,1509691699.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:20.156Z,1509691700.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:20.552Z,1509691700.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:20.951Z,1509691700.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:21.411Z,1509691701.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:21.755Z,1509691701.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:22.158Z,1509691702.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:22.558Z,1509691702.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:22.959Z,1509691702.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:23.357Z,1509691703.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:23.754Z,1509691703.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:24.156Z,1509691704.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:24.557Z,1509691704.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:24.955Z,1509691704.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:25.356Z,1509691705.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:25.756Z,1509691705.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:26.157Z,1509691706.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:26.556Z,1509691706.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:26.953Z,1509691706.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:27.357Z,1509691707.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:27.763Z,1509691707.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:28.157Z,1509691708.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:31.495Z,1509691711.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:31.671Z,1509691711.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:32.044Z,1509691712.044 [PNI_TCM](ERROR): CRC does not match. Expected:0x6870 got:0x56832
2017-11-03T06:48:32.063Z,1509691712.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:32.491Z,1509691712.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:32.851Z,1509691712.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:33.280Z,1509691713.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:33.671Z,1509691713.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:34.035Z,1509691714.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:34.442Z,1509691714.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:34.848Z,1509691714.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:35.247Z,1509691715.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:35.673Z,1509691715.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:36.042Z,1509691716.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:36.447Z,1509691716.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:36.885Z,1509691716.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:37.272Z,1509691717.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:37.642Z,1509691717.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:38.043Z,1509691718.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:38.449Z,1509691718.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:38.890Z,1509691718.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:39.238Z,1509691719.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:39.648Z,1509691719.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:40.047Z,1509691720.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:40.474Z,1509691720.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:40.893Z,1509691720.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:41.272Z,1509691721.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:41.649Z,1509691721.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:42.073Z,1509691722.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:42.441Z,1509691722.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:42.933Z,1509691722.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:43.248Z,1509691723.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:43.667Z,1509691723.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:44.044Z,1509691724.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:44.499Z,1509691724.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:44.850Z,1509691724.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:45.262Z,1509691725.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:45.603Z,1509691725.603 [NAL9602](INFO): Powering up NAL9602
2017-11-03T06:48:45.655Z,1509691725.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:46.102Z,1509691726.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:46.449Z,1509691726.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:46.867Z,1509691726.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:47.282Z,1509691727.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:47.655Z,1509691727.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:48.089Z,1509691728.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:48.490Z,1509691728.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:48.844Z,1509691728.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:49.253Z,1509691729.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:49.653Z,1509691729.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:50.061Z,1509691730.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:50.431Z,1509691730.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:50.879Z,1509691730.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:51.258Z,1509691731.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:51.666Z,1509691731.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:52.035Z,1509691732.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:52.433Z,1509691732.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:52.881Z,1509691732.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:53.263Z,1509691733.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:53.634Z,1509691733.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:54.041Z,1509691734.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:54.443Z,1509691734.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:54.890Z,1509691734.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:55.241Z,1509691735.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:55.665Z,1509691735.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:56.067Z,1509691736.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:56.410Z,1509691736.410 [NAL9602](INFO): NAL9602 initialized
2017-11-03T06:48:56.479Z,1509691736.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:56.907Z,1509691736.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:57.271Z,1509691737.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:57.643Z,1509691737.643 [PNI_TCM](ERROR): CRC does not match. Expected:0x64082 got:0x49817
2017-11-03T06:48:57.675Z,1509691737.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:58.074Z,1509691738.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:58.449Z,1509691738.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:58.847Z,1509691738.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:59.288Z,1509691739.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:48:59.668Z,1509691739.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:00.042Z,1509691740.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:00.488Z,1509691740.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:00.867Z,1509691740.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:01.274Z,1509691741.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:01.683Z,1509691741.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:02.048Z,1509691742.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:02.483Z,1509691742.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:02.924Z,1509691742.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:03.258Z,1509691743.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:03.663Z,1509691743.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:04.060Z,1509691744.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:04.467Z,1509691744.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:04.892Z,1509691744.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:05.250Z,1509691745.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:05.651Z,1509691745.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:06.067Z,1509691746.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:06.461Z,1509691746.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:06.893Z,1509691746.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:07.263Z,1509691747.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:07.667Z,1509691747.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:08.055Z,1509691748.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:08.450Z,1509691748.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:08.903Z,1509691748.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:09.274Z,1509691749.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:09.657Z,1509691749.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:10.060Z,1509691750.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:10.453Z,1509691750.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:10.899Z,1509691750.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:10.912Z,1509691750.912 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:49:10.912Z,1509691750.912 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T06:49:10.912Z,1509691750.912 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:49:11.017Z,1509691751.017 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:49:11.262Z,1509691751.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:49:11.263Z,1509691751.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:11.316Z,1509691751.316 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:49:11.429Z,1509691751.429 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:49:11.657Z,1509691751.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:49:11.658Z,1509691751.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:12.052Z,1509691752.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:49:12.053Z,1509691752.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:12.474Z,1509691752.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:49:12.475Z,1509691752.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:12.861Z,1509691752.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:49:12.862Z,1509691752.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:12.948Z,1509691752.948 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:49:12.949Z,1509691752.949 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T06:49:13.044Z,1509691753.044 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:49:13.045Z,1509691753.045 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:49:13.045Z,1509691753.045 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:49:13.045Z,1509691753.045 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:49:13.259Z,1509691753.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:49:13.260Z,1509691753.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:13.702Z,1509691753.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:49:13.703Z,1509691753.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:14.068Z,1509691754.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:49:14.069Z,1509691754.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:14.450Z,1509691754.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:49:14.451Z,1509691754.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:14.874Z,1509691754.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:49:14.875Z,1509691754.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:15.259Z,1509691755.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:49:15.260Z,1509691755.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:15.702Z,1509691755.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:49:15.703Z,1509691755.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:16.061Z,1509691756.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:49:16.062Z,1509691756.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:16.494Z,1509691756.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:49:16.495Z,1509691756.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:16.855Z,1509691756.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:49:16.856Z,1509691756.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:17.165Z,1509691757.165 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:49:17.271Z,1509691757.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:49:17.277Z,1509691757.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:17.323Z,1509691757.323 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:49:17.324Z,1509691757.324 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:49:17.325Z,1509691757.325 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:49:17.326Z,1509691757.326 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:49:17.665Z,1509691757.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:49:17.666Z,1509691757.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:18.153Z,1509691758.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:18.467Z,1509691758.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:18.875Z,1509691758.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:19.270Z,1509691759.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:19.649Z,1509691759.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:20.047Z,1509691760.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:20.467Z,1509691760.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:20.883Z,1509691760.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:21.252Z,1509691761.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:21.650Z,1509691761.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:22.073Z,1509691762.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:22.440Z,1509691762.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:22.871Z,1509691762.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:23.249Z,1509691763.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:23.671Z,1509691763.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:24.045Z,1509691764.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:24.473Z,1509691764.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:24.879Z,1509691764.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:25.277Z,1509691765.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:25.645Z,1509691765.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:26.051Z,1509691766.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:26.452Z,1509691766.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:26.881Z,1509691766.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:27.277Z,1509691767.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:27.702Z,1509691767.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:28.063Z,1509691768.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:28.476Z,1509691768.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:31.758Z,1509691771.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:31.938Z,1509691771.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:32.376Z,1509691772.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:32.735Z,1509691772.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:33.150Z,1509691773.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:33.542Z,1509691773.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:33.914Z,1509691773.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:34.311Z,1509691774.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:34.712Z,1509691774.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:35.111Z,1509691775.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:35.535Z,1509691775.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:35.938Z,1509691775.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:36.340Z,1509691776.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:36.711Z,1509691776.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:37.114Z,1509691777.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:37.515Z,1509691777.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:37.913Z,1509691777.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:38.341Z,1509691778.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:38.821Z,1509691778.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:39.123Z,1509691779.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:39.515Z,1509691779.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:39.913Z,1509691779.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:40.316Z,1509691780.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:40.718Z,1509691780.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:41.114Z,1509691781.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:41.531Z,1509691781.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:41.926Z,1509691781.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:42.327Z,1509691782.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:42.715Z,1509691782.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:43.119Z,1509691783.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:43.519Z,1509691783.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:43.915Z,1509691783.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:44.326Z,1509691784.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:44.727Z,1509691784.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:45.178Z,1509691785.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:45.523Z,1509691785.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:45.915Z,1509691785.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:46.354Z,1509691786.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:46.723Z,1509691786.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:47.152Z,1509691787.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:47.563Z,1509691787.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:47.927Z,1509691787.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:48.327Z,1509691788.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:48.717Z,1509691788.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:49.122Z,1509691789.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:49.523Z,1509691789.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:49.916Z,1509691789.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:50.328Z,1509691790.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:50.728Z,1509691790.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:51.137Z,1509691791.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:51.522Z,1509691791.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:51.919Z,1509691791.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:52.323Z,1509691792.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:52.737Z,1509691792.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:53.121Z,1509691793.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:53.528Z,1509691793.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:53.927Z,1509691793.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:54.325Z,1509691794.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:54.716Z,1509691794.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:55.122Z,1509691795.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:55.508Z,1509691795.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:55.930Z,1509691795.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:56.328Z,1509691796.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:56.730Z,1509691796.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:57.139Z,1509691797.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:57.533Z,1509691797.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:57.934Z,1509691797.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:58.315Z,1509691798.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:58.705Z,1509691798.705 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:49:58.705Z,1509691798.705 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:49:58.705Z,1509691798.705 [BPC1](ERROR): Data Fault
2017-11-03T06:49:58.714Z,1509691798.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:58.836Z,1509691798.836 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:49:59.145Z,1509691799.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:59.540Z,1509691799.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:49:59.924Z,1509691799.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:00.020Z,1509691800.020 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:50:00.020Z,1509691800.020 [BPC1] No Fault, FailCount= 1
2017-11-03T06:50:00.381Z,1509691800.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:00.711Z,1509691800.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:01.111Z,1509691801.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:01.550Z,1509691801.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:01.910Z,1509691801.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:02.340Z,1509691802.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:02.741Z,1509691802.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:03.120Z,1509691803.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:03.513Z,1509691803.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:03.914Z,1509691803.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:04.313Z,1509691804.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:04.714Z,1509691804.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:05.117Z,1509691805.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:05.521Z,1509691805.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:05.920Z,1509691805.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:06.324Z,1509691806.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:06.717Z,1509691806.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:07.121Z,1509691807.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:07.520Z,1509691807.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:07.919Z,1509691807.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:08.328Z,1509691808.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:08.731Z,1509691808.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:09.139Z,1509691809.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:09.516Z,1509691809.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:09.914Z,1509691809.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:10.314Z,1509691810.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:10.715Z,1509691810.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:11.122Z,1509691811.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:11.520Z,1509691811.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:11.941Z,1509691811.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:12.342Z,1509691812.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:12.715Z,1509691812.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:13.143Z,1509691813.143 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:13.143Z,1509691813.143 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 132
2017-11-03T06:50:13.143Z,1509691813.143 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:50:13.149Z,1509691813.149 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:13.149Z,1509691813.149 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 132
2017-11-03T06:50:13.149Z,1509691813.149 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:50:13.151Z,1509691813.151 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:13.151Z,1509691813.151 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 132
2017-11-03T06:50:13.151Z,1509691813.151 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:50:13.244Z,1509691813.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:50:13.245Z,1509691813.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:50:13.245Z,1509691813.245 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:50:13.664Z,1509691813.664 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:50:13.665Z,1509691813.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 132
2017-11-03T06:50:13.665Z,1509691813.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:50:13.665Z,1509691813.665 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 132
2017-11-03T06:50:13.666Z,1509691813.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:50:13.666Z,1509691813.666 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 132
2017-11-03T06:50:13.918Z,1509691813.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:50:13.918Z,1509691813.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:50:13.919Z,1509691813.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:50:13.919Z,1509691813.919 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:50:13.919Z,1509691813.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:50:13.920Z,1509691813.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:50:13.920Z,1509691813.920 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:50:13.921Z,1509691813.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:50:13.921Z,1509691813.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:50:14.359Z,1509691814.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:14.775Z,1509691814.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:15.170Z,1509691815.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:15.526Z,1509691815.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:15.958Z,1509691815.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:16.317Z,1509691816.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:16.720Z,1509691816.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:17.119Z,1509691817.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:17.531Z,1509691817.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:17.928Z,1509691817.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:18.326Z,1509691818.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:18.723Z,1509691818.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:19.129Z,1509691819.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:19.526Z,1509691819.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:19.925Z,1509691819.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:20.335Z,1509691820.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:20.733Z,1509691820.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:21.120Z,1509691821.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:21.516Z,1509691821.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:21.915Z,1509691821.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:22.313Z,1509691822.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:22.714Z,1509691822.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:23.114Z,1509691823.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:23.523Z,1509691823.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:23.923Z,1509691823.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:24.324Z,1509691824.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:24.717Z,1509691824.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:25.114Z,1509691825.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:25.521Z,1509691825.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:25.919Z,1509691825.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:26.324Z,1509691826.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:26.725Z,1509691826.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:27.152Z,1509691827.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:27.570Z,1509691827.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:28.056Z,1509691828.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:28.318Z,1509691828.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:28.762Z,1509691828.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:31.977Z,1509691831.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:32.163Z,1509691832.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:32.563Z,1509691832.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:32.939Z,1509691832.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:33.320Z,1509691833.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:33.718Z,1509691833.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:34.120Z,1509691834.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:34.525Z,1509691834.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:34.937Z,1509691834.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:35.331Z,1509691835.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:35.718Z,1509691835.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:36.119Z,1509691836.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:36.520Z,1509691836.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:36.924Z,1509691836.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:37.335Z,1509691837.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:37.730Z,1509691837.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:38.135Z,1509691838.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:38.523Z,1509691838.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:38.962Z,1509691838.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:39.323Z,1509691839.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:39.717Z,1509691839.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:40.121Z,1509691840.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:40.535Z,1509691840.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:40.932Z,1509691840.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:41.327Z,1509691841.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:41.726Z,1509691841.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:42.118Z,1509691842.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:42.518Z,1509691842.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:42.918Z,1509691842.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:43.390Z,1509691843.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:43.735Z,1509691843.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:44.132Z,1509691844.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:44.563Z,1509691844.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:44.915Z,1509691844.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:45.387Z,1509691845.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:45.751Z,1509691845.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:46.114Z,1509691846.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:46.567Z,1509691846.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:46.983Z,1509691846.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:47.343Z,1509691847.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:47.712Z,1509691847.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:48.139Z,1509691848.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:48.511Z,1509691848.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:48.940Z,1509691848.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:49.341Z,1509691849.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:49.738Z,1509691849.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:50.140Z,1509691850.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:50.519Z,1509691850.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:50.939Z,1509691850.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:51.312Z,1509691851.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:51.711Z,1509691851.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:52.112Z,1509691852.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:52.541Z,1509691852.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:52.959Z,1509691852.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:53.321Z,1509691853.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:53.715Z,1509691853.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:54.117Z,1509691854.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:54.516Z,1509691854.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:54.916Z,1509691854.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:55.318Z,1509691855.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:55.742Z,1509691855.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:56.123Z,1509691856.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:56.516Z,1509691856.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:56.918Z,1509691856.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:57.406Z,1509691857.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:57.716Z,1509691857.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:58.118Z,1509691858.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:58.535Z,1509691858.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:58.987Z,1509691858.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:59.471Z,1509691859.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:50:59.707Z,1509691859.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:00.148Z,1509691860.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:00.585Z,1509691860.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:00.943Z,1509691860.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:01.367Z,1509691861.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:01.739Z,1509691861.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:02.195Z,1509691862.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:02.521Z,1509691862.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:02.927Z,1509691862.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:03.343Z,1509691863.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:03.759Z,1509691863.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:04.143Z,1509691864.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:04.523Z,1509691864.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:04.963Z,1509691864.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:05.353Z,1509691865.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:05.725Z,1509691865.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:06.135Z,1509691866.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:06.527Z,1509691866.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:06.975Z,1509691866.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:07.380Z,1509691867.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:07.753Z,1509691867.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:08.161Z,1509691868.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:08.535Z,1509691868.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:08.924Z,1509691868.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:09.315Z,1509691869.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:09.722Z,1509691869.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:10.132Z,1509691870.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:10.535Z,1509691870.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:10.934Z,1509691870.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:11.399Z,1509691871.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:11.731Z,1509691871.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:12.120Z,1509691872.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:12.531Z,1509691872.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:12.931Z,1509691872.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:13.388Z,1509691873.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:13.425Z,1509691873.425 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:51:13.425Z,1509691873.425 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T06:51:13.425Z,1509691873.425 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:51:13.509Z,1509691873.509 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:51:13.787Z,1509691873.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T06:51:13.795Z,1509691873.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:13.829Z,1509691873.829 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:51:14.146Z,1509691874.146 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:51:14.261Z,1509691874.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T06:51:14.262Z,1509691874.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:14.544Z,1509691874.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:51:14.545Z,1509691874.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:14.951Z,1509691874.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:51:14.952Z,1509691874.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:15.350Z,1509691875.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:51:15.351Z,1509691875.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:15.456Z,1509691875.456 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T06:51:15.456Z,1509691875.456 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T06:51:15.714Z,1509691875.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T06:51:15.715Z,1509691875.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:15.760Z,1509691875.760 [Rowe_600LCM](INFO): Initializing
2017-11-03T06:51:15.761Z,1509691875.761 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T06:51:15.761Z,1509691875.761 [Rowe_600LCM](INFO): LCM OK
2017-11-03T06:51:15.761Z,1509691875.761 [Rowe_600LCM](INFO): Powering up
2017-11-03T06:51:16.150Z,1509691876.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:51:16.151Z,1509691876.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:16.555Z,1509691876.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:51:16.556Z,1509691876.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:16.924Z,1509691876.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T06:51:16.925Z,1509691876.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:17.325Z,1509691877.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T06:51:17.326Z,1509691877.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:17.715Z,1509691877.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T06:51:17.717Z,1509691877.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:18.117Z,1509691878.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T06:51:18.118Z,1509691878.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:18.517Z,1509691878.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T06:51:18.518Z,1509691878.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:18.914Z,1509691878.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T06:51:18.915Z,1509691878.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:19.323Z,1509691879.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T06:51:19.324Z,1509691879.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:19.730Z,1509691879.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T06:51:19.731Z,1509691879.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:19.903Z,1509691879.903 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T06:51:19.963Z,1509691879.963 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T06:51:19.964Z,1509691879.964 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T06:51:19.965Z,1509691879.965 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T06:51:19.965Z,1509691879.965 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T06:51:20.155Z,1509691880.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:51:20.159Z,1509691880.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:20.524Z,1509691880.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:20.924Z,1509691880.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:21.315Z,1509691881.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:21.719Z,1509691881.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:22.119Z,1509691882.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:22.526Z,1509691882.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:22.925Z,1509691882.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:23.325Z,1509691883.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:23.716Z,1509691883.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:24.123Z,1509691884.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:24.523Z,1509691884.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:24.914Z,1509691884.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:25.325Z,1509691885.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:25.731Z,1509691885.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:26.124Z,1509691886.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:26.515Z,1509691886.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:27.016Z,1509691887.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:27.315Z,1509691887.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:27.717Z,1509691887.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:28.116Z,1509691888.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:28.586Z,1509691888.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:28.926Z,1509691888.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:32.134Z,1509691892.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:32.299Z,1509691892.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:32.707Z,1509691892.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:33.119Z,1509691893.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:33.484Z,1509691893.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:33.883Z,1509691893.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:34.297Z,1509691894.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:34.696Z,1509691894.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:35.095Z,1509691895.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:35.486Z,1509691895.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:35.883Z,1509691895.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:36.278Z,1509691896.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:36.685Z,1509691896.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:37.083Z,1509691897.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:37.496Z,1509691897.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:37.907Z,1509691897.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:38.296Z,1509691898.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:38.808Z,1509691898.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:39.087Z,1509691899.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:39.502Z,1509691899.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:39.890Z,1509691899.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:40.316Z,1509691900.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:40.697Z,1509691900.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:41.118Z,1509691901.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:41.491Z,1509691901.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:41.895Z,1509691901.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:42.350Z,1509691902.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:42.691Z,1509691902.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:43.095Z,1509691903.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:43.492Z,1509691903.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:43.916Z,1509691903.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:44.352Z,1509691904.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:44.688Z,1509691904.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:45.142Z,1509691905.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:45.542Z,1509691905.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:45.898Z,1509691905.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:46.331Z,1509691906.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:46.696Z,1509691906.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:47.130Z,1509691907.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:47.530Z,1509691907.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:47.900Z,1509691907.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:48.294Z,1509691908.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:48.693Z,1509691908.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:49.091Z,1509691909.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:49.495Z,1509691909.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:49.901Z,1509691909.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:50.296Z,1509691910.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:50.695Z,1509691910.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:51.092Z,1509691911.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:51.492Z,1509691911.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:51.945Z,1509691911.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:52.300Z,1509691912.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:52.706Z,1509691912.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:53.106Z,1509691913.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:53.490Z,1509691913.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:53.890Z,1509691913.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:54.294Z,1509691914.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:54.385Z,1509691914.385 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T06:51:54.695Z,1509691914.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:55.094Z,1509691915.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:55.503Z,1509691915.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:55.900Z,1509691915.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:56.359Z,1509691916.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:56.692Z,1509691916.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:57.092Z,1509691917.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:57.492Z,1509691917.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:57.893Z,1509691917.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:58.359Z,1509691918.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:58.707Z,1509691918.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:59.111Z,1509691919.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:59.546Z,1509691919.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:51:59.918Z,1509691919.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:00.296Z,1509691920.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:00.736Z,1509691920.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:01.100Z,1509691921.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:01.540Z,1509691921.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:01.946Z,1509691921.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:02.305Z,1509691922.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:02.698Z,1509691922.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:03.095Z,1509691923.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:03.496Z,1509691923.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:03.898Z,1509691923.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:04.301Z,1509691924.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:04.704Z,1509691924.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:05.101Z,1509691925.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:05.497Z,1509691925.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:05.944Z,1509691925.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:06.299Z,1509691926.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:06.697Z,1509691926.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:07.097Z,1509691927.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:07.504Z,1509691927.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:07.915Z,1509691927.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:08.310Z,1509691928.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:08.698Z,1509691928.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:09.097Z,1509691929.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:09.496Z,1509691929.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:09.894Z,1509691929.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:10.389Z,1509691930.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:10.704Z,1509691930.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:11.107Z,1509691931.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:11.496Z,1509691931.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:11.896Z,1509691931.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:12.366Z,1509691932.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:12.696Z,1509691932.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:13.083Z,1509691933.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:13.505Z,1509691933.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:13.974Z,1509691933.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:14.311Z,1509691934.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:14.719Z,1509691934.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:15.089Z,1509691935.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:15.519Z,1509691935.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:15.911Z,1509691935.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:16.327Z,1509691936.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:16.710Z,1509691936.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:17.118Z,1509691937.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:17.483Z,1509691937.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:17.905Z,1509691937.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:18.284Z,1509691938.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:18.683Z,1509691938.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:19.092Z,1509691939.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:19.518Z,1509691939.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:19.937Z,1509691939.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:20.320Z,1509691940.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:20.687Z,1509691940.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:21.088Z,1509691941.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:21.487Z,1509691941.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:21.887Z,1509691941.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:22.318Z,1509691942.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:22.700Z,1509691942.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:23.116Z,1509691943.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:23.487Z,1509691943.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:23.887Z,1509691943.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:24.326Z,1509691944.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:24.693Z,1509691944.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:25.091Z,1509691945.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:25.499Z,1509691945.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:25.901Z,1509691945.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:26.357Z,1509691946.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:26.694Z,1509691946.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:27.095Z,1509691947.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:27.491Z,1509691947.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:27.895Z,1509691947.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:27.898Z,1509691947.898 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T06:47:27.5Z
2017-11-03T06:52:27.898Z,1509691947.898 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T06:52:27.898Z,1509691947.898 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T06:52:28.366Z,1509691948.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:28.842Z,1509691948.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:29.159Z,1509691949.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:32.497Z,1509691952.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:32.586Z,1509691952.586 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0156.lzma
2017-11-03T06:52:32.678Z,1509691952.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:33.090Z,1509691953.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:33.391Z,1509691953.391 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0156.lzma.bak
2017-11-03T06:52:33.391Z,1509691953.391 [DataOverHttps](INFO): SBD MOMSN=5182955
2017-11-03T06:52:33.455Z,1509691953.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:34.150Z,1509691954.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:34.315Z,1509691954.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:37.539Z,1509691957.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:37.697Z,1509691957.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:38.107Z,1509691958.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:38.505Z,1509691958.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:38.901Z,1509691958.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:39.296Z,1509691959.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:42.606Z,1509691962.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:42.717Z,1509691962.717 [DataOverHttps](INFO): Sending 223 bytes from file Logs/20171103T001125/Express0157.lzma
2017-11-03T06:52:42.787Z,1509691962.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:43.185Z,1509691963.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:43.519Z,1509691963.519 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0157.lzma.bak
2017-11-03T06:52:43.519Z,1509691963.519 [DataOverHttps](INFO): SBD MOMSN=5182957
2017-11-03T06:52:43.587Z,1509691963.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:44.201Z,1509691964.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:44.204Z,1509691964.204 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T06:52:44.205Z,1509691964.205 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T06:52:44.205Z,1509691964.205 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T06:52:44.387Z,1509691964.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:47.650Z,1509691967.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:47.887Z,1509691967.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:48.217Z,1509691968.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:48.667Z,1509691968.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:49.016Z,1509691969.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:49.442Z,1509691969.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:49.878Z,1509691969.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:50.220Z,1509691970.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:50.716Z,1509691970.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:51.027Z,1509691971.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:51.426Z,1509691971.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:51.791Z,1509691971.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:52.204Z,1509691972.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:52.615Z,1509691972.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:53.004Z,1509691973.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:53.394Z,1509691973.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:53.792Z,1509691973.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:54.208Z,1509691974.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:54.599Z,1509691974.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:55.004Z,1509691975.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:55.392Z,1509691975.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:55.879Z,1509691975.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:56.200Z,1509691976.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:56.608Z,1509691976.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:57.030Z,1509691977.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:57.401Z,1509691977.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:57.874Z,1509691977.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:58.208Z,1509691978.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:58.630Z,1509691978.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:59.011Z,1509691979.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:59.401Z,1509691979.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:52:59.851Z,1509691979.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:00.219Z,1509691980.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:00.617Z,1509691980.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:01.017Z,1509691981.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:01.417Z,1509691981.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:01.919Z,1509691981.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:02.205Z,1509691982.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:02.639Z,1509691982.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:03.030Z,1509691983.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:03.438Z,1509691983.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:03.835Z,1509691983.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:04.229Z,1509691984.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:04.603Z,1509691984.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:05.008Z,1509691985.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:05.403Z,1509691985.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:05.802Z,1509691985.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:06.211Z,1509691986.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:06.604Z,1509691986.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:07.005Z,1509691987.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:07.400Z,1509691987.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:07.801Z,1509691987.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:08.205Z,1509691988.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:08.611Z,1509691988.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:09.008Z,1509691989.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:09.402Z,1509691989.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:09.853Z,1509691989.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:10.208Z,1509691990.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:10.606Z,1509691990.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:11.011Z,1509691991.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:11.401Z,1509691991.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:11.886Z,1509691991.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:12.208Z,1509691992.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:12.624Z,1509691992.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:13.012Z,1509691993.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:13.407Z,1509691993.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:13.872Z,1509691993.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:14.215Z,1509691994.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:14.215Z,1509691994.215 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 133
2017-11-03T06:53:14.215Z,1509691994.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:53:14.217Z,1509691994.217 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:14.217Z,1509691994.217 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 133
2017-11-03T06:53:14.217Z,1509691994.217 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:53:14.219Z,1509691994.219 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:14.219Z,1509691994.219 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 133
2017-11-03T06:53:14.219Z,1509691994.219 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:53:14.332Z,1509691994.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:53:14.332Z,1509691994.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:53:14.333Z,1509691994.333 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:53:14.692Z,1509691994.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:53:14.693Z,1509691994.693 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 133
2017-11-03T06:53:14.693Z,1509691994.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:53:14.693Z,1509691994.693 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 133
2017-11-03T06:53:14.694Z,1509691994.694 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:53:14.694Z,1509691994.694 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 133
2017-11-03T06:53:15.009Z,1509691995.009 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T06:53:15.009Z,1509691995.009 [BPC1] Data Fault, FailCount= 1
2017-11-03T06:53:15.009Z,1509691995.009 [BPC1](ERROR): Data Fault
2017-11-03T06:53:15.016Z,1509691995.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:53:15.016Z,1509691995.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:53:15.017Z,1509691995.017 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:53:15.017Z,1509691995.017 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:53:15.018Z,1509691995.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:53:15.018Z,1509691995.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:53:15.018Z,1509691995.018 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:53:15.019Z,1509691995.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:53:15.019Z,1509691995.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:53:15.101Z,1509691995.101 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T06:53:15.409Z,1509691995.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:15.858Z,1509691995.858 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T06:53:15.858Z,1509691995.858 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T06:53:15.858Z,1509691995.858 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T06:53:15.871Z,1509691995.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T06:53:15.881Z,1509691995.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:15.985Z,1509691995.985 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T06:53:15.985Z,1509691995.985 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T06:53:16.218Z,1509691996.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T06:53:16.219Z,1509691996.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:16.269Z,1509691996.269 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T06:53:16.322Z,1509691996.322 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:53:16.322Z,1509691996.322 [BPC1] No Fault, FailCount= 1
2017-11-03T06:53:16.397Z,1509691996.397 [Rowe_600LCM](INFO): Powering down
2017-11-03T06:53:16.683Z,1509691996.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-03T06:53:16.685Z,1509691996.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:17.022Z,1509691997.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:53:17.023Z,1509691997.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:17.424Z,1509691997.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:53:17.425Z,1509691997.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:17.803Z,1509691997.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:53:17.804Z,1509691997.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:18.222Z,1509691998.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:53:18.223Z,1509691998.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:18.627Z,1509691998.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:53:18.628Z,1509691998.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:19.004Z,1509691999.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:53:19.021Z,1509691999.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:19.402Z,1509691999.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:53:19.403Z,1509691999.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:19.795Z,1509691999.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:53:19.796Z,1509691999.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:20.208Z,1509692000.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:53:20.225Z,1509692000.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:20.608Z,1509692000.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:53:20.625Z,1509692000.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:21.026Z,1509692001.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:53:21.027Z,1509692001.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:21.406Z,1509692001.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:53:21.407Z,1509692001.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:21.799Z,1509692001.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:53:21.800Z,1509692001.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:22.225Z,1509692002.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:53:22.226Z,1509692002.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:22.625Z,1509692002.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:53:22.626Z,1509692002.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:23.004Z,1509692003.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:53:23.005Z,1509692003.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:23.400Z,1509692003.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:53:23.401Z,1509692003.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:23.799Z,1509692003.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:53:23.800Z,1509692003.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:24.205Z,1509692004.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:53:24.205Z,1509692004.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:24.626Z,1509692004.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:53:24.627Z,1509692004.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:25.004Z,1509692005.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:53:25.005Z,1509692005.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:25.400Z,1509692005.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:53:25.401Z,1509692005.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:25.801Z,1509692005.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:53:25.802Z,1509692005.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:26.224Z,1509692006.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:53:26.225Z,1509692006.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:26.623Z,1509692006.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:53:26.624Z,1509692006.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:27.006Z,1509692007.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:53:27.007Z,1509692007.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:27.400Z,1509692007.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:53:27.401Z,1509692007.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:27.806Z,1509692007.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:53:27.807Z,1509692007.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:28.226Z,1509692008.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:53:28.227Z,1509692008.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:28.624Z,1509692008.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:53:28.625Z,1509692008.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:29.005Z,1509692009.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:53:29.006Z,1509692009.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:29.466Z,1509692009.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T06:53:29.467Z,1509692009.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:29.801Z,1509692009.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:53:29.802Z,1509692009.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:30.204Z,1509692010.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T06:53:30.205Z,1509692010.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:30.638Z,1509692010.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:53:30.638Z,1509692010.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:31.004Z,1509692011.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T06:53:31.005Z,1509692011.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:31.431Z,1509692011.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T06:53:31.432Z,1509692011.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:31.799Z,1509692011.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T06:53:31.800Z,1509692011.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:32.234Z,1509692012.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T06:53:32.235Z,1509692012.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:32.604Z,1509692012.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T06:53:32.605Z,1509692012.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:33.004Z,1509692013.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T06:53:33.005Z,1509692013.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:33.406Z,1509692013.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T06:53:33.407Z,1509692013.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:33.800Z,1509692013.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T06:53:33.801Z,1509692013.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:34.209Z,1509692014.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T06:53:34.210Z,1509692014.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:34.610Z,1509692014.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T06:53:34.611Z,1509692014.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:35.010Z,1509692015.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T06:53:35.011Z,1509692015.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:35.404Z,1509692015.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T06:53:35.405Z,1509692015.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:35.801Z,1509692015.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:36.205Z,1509692016.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:36.609Z,1509692016.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:37.005Z,1509692017.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:37.401Z,1509692017.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:37.802Z,1509692017.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:38.205Z,1509692018.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:38.630Z,1509692018.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:39.005Z,1509692019.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:39.407Z,1509692019.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:39.800Z,1509692019.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:40.230Z,1509692020.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:40.609Z,1509692020.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:41.004Z,1509692021.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:41.410Z,1509692021.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:41.829Z,1509692021.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:42.205Z,1509692022.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:42.629Z,1509692022.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:43.005Z,1509692023.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:43.400Z,1509692023.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:43.806Z,1509692023.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:44.246Z,1509692024.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:44.654Z,1509692024.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:47.695Z,1509692027.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:47.837Z,1509692027.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:48.239Z,1509692028.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:48.663Z,1509692028.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:49.031Z,1509692029.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:49.481Z,1509692029.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:49.867Z,1509692029.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:50.244Z,1509692030.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:50.639Z,1509692030.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:51.021Z,1509692031.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:51.470Z,1509692031.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:51.824Z,1509692031.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:52.245Z,1509692032.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:52.643Z,1509692032.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:53.051Z,1509692033.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:53.421Z,1509692033.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:53.846Z,1509692033.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:54.244Z,1509692034.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:54.647Z,1509692034.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:55.042Z,1509692035.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:55.443Z,1509692035.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:55.844Z,1509692035.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:56.247Z,1509692036.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:56.624Z,1509692036.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:57.046Z,1509692037.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:57.443Z,1509692037.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:57.835Z,1509692037.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:58.247Z,1509692038.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:58.647Z,1509692038.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:59.048Z,1509692039.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:59.446Z,1509692039.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:53:59.823Z,1509692039.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:00.234Z,1509692040.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:00.644Z,1509692040.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:01.023Z,1509692041.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:01.445Z,1509692041.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:01.867Z,1509692041.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:02.243Z,1509692042.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:02.666Z,1509692042.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:03.045Z,1509692043.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:03.463Z,1509692043.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:03.834Z,1509692043.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:04.271Z,1509692044.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:04.675Z,1509692044.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:05.043Z,1509692045.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:05.422Z,1509692045.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:05.841Z,1509692045.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:06.234Z,1509692046.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:06.623Z,1509692046.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:07.041Z,1509692047.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:07.445Z,1509692047.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:07.844Z,1509692047.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:08.246Z,1509692048.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:08.641Z,1509692048.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:09.046Z,1509692049.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:09.441Z,1509692049.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:09.835Z,1509692049.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:10.249Z,1509692050.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:10.651Z,1509692050.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:11.045Z,1509692051.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:11.423Z,1509692051.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:11.823Z,1509692051.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:12.234Z,1509692052.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:12.645Z,1509692052.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:13.024Z,1509692053.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:13.445Z,1509692053.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:13.846Z,1509692053.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:14.245Z,1509692054.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:14.641Z,1509692054.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:15.045Z,1509692055.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:15.441Z,1509692055.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:15.841Z,1509692055.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:16.250Z,1509692056.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:16.722Z,1509692056.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:17.051Z,1509692057.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:17.459Z,1509692057.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:17.824Z,1509692057.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:18.266Z,1509692058.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:18.650Z,1509692058.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:19.023Z,1509692059.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:19.449Z,1509692059.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:19.899Z,1509692059.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:20.248Z,1509692060.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:20.627Z,1509692060.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:21.022Z,1509692061.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:21.424Z,1509692061.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:21.823Z,1509692061.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:22.252Z,1509692062.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:22.651Z,1509692062.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:23.051Z,1509692063.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:23.422Z,1509692063.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:23.827Z,1509692063.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:24.227Z,1509692064.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:24.630Z,1509692064.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:25.027Z,1509692065.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:25.451Z,1509692065.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:25.858Z,1509692065.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:26.251Z,1509692066.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:26.623Z,1509692066.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:27.022Z,1509692067.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:27.423Z,1509692067.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:27.823Z,1509692067.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:28.252Z,1509692068.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:28.651Z,1509692068.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:29.051Z,1509692069.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:29.422Z,1509692069.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:29.823Z,1509692069.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:30.270Z,1509692070.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:30.623Z,1509692070.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:31.078Z,1509692071.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:31.455Z,1509692071.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:31.835Z,1509692071.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:32.271Z,1509692072.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:32.627Z,1509692072.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:33.062Z,1509692073.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:33.463Z,1509692073.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:33.835Z,1509692073.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:34.255Z,1509692074.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:34.655Z,1509692074.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:35.055Z,1509692075.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:35.423Z,1509692075.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:35.826Z,1509692075.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:36.227Z,1509692076.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:36.623Z,1509692076.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:37.023Z,1509692077.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:37.455Z,1509692077.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:37.836Z,1509692077.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:38.253Z,1509692078.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:38.635Z,1509692078.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:39.034Z,1509692079.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:39.423Z,1509692079.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:39.827Z,1509692079.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:40.256Z,1509692080.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:40.652Z,1509692080.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:41.055Z,1509692081.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:41.423Z,1509692081.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:41.823Z,1509692081.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:42.227Z,1509692082.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:42.626Z,1509692082.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:43.026Z,1509692083.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:43.455Z,1509692083.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:43.855Z,1509692083.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:44.255Z,1509692084.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:44.631Z,1509692084.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:47.794Z,1509692087.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:47.957Z,1509692087.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:48.365Z,1509692088.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:48.806Z,1509692088.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:49.161Z,1509692089.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:49.594Z,1509692089.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:49.967Z,1509692089.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:50.356Z,1509692090.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:50.765Z,1509692090.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:51.168Z,1509692091.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:51.571Z,1509692091.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:51.971Z,1509692091.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:52.366Z,1509692092.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:52.739Z,1509692092.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:53.143Z,1509692093.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:53.558Z,1509692093.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:53.959Z,1509692093.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:54.359Z,1509692094.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:54.759Z,1509692094.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:55.167Z,1509692095.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:55.551Z,1509692095.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:55.954Z,1509692095.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:56.347Z,1509692096.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:56.753Z,1509692096.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:57.155Z,1509692097.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:57.560Z,1509692097.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:57.959Z,1509692097.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:58.366Z,1509692098.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:58.759Z,1509692098.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:59.151Z,1509692099.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:59.553Z,1509692099.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:54:59.959Z,1509692099.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:00.363Z,1509692100.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:00.759Z,1509692100.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:01.159Z,1509692101.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:01.715Z,1509692101.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:01.995Z,1509692101.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:02.355Z,1509692102.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:02.755Z,1509692102.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:03.174Z,1509692103.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:03.578Z,1509692103.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:03.996Z,1509692103.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:04.399Z,1509692104.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:04.750Z,1509692104.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:05.151Z,1509692105.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:05.551Z,1509692105.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:05.952Z,1509692105.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:06.356Z,1509692106.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:06.776Z,1509692106.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:07.177Z,1509692107.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:07.554Z,1509692107.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:07.950Z,1509692107.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:08.349Z,1509692108.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:08.752Z,1509692108.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:09.148Z,1509692109.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:09.553Z,1509692109.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:09.978Z,1509692109.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:10.379Z,1509692110.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:10.758Z,1509692110.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:11.159Z,1509692111.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:11.551Z,1509692111.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:11.947Z,1509692111.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:12.377Z,1509692112.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:12.778Z,1509692112.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:13.179Z,1509692113.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:13.566Z,1509692113.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:13.956Z,1509692113.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:14.359Z,1509692114.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:14.755Z,1509692114.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:15.155Z,1509692115.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:15.564Z,1509692115.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:15.974Z,1509692115.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:16.418Z,1509692116.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:16.776Z,1509692116.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:17.153Z,1509692117.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:17.579Z,1509692117.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:17.959Z,1509692117.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:18.401Z,1509692118.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:18.803Z,1509692118.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:19.160Z,1509692119.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:19.554Z,1509692119.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:19.956Z,1509692119.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:20.359Z,1509692120.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:20.755Z,1509692120.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:21.155Z,1509692121.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:21.563Z,1509692121.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:21.966Z,1509692121.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:22.367Z,1509692122.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:22.759Z,1509692122.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:23.159Z,1509692123.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:23.556Z,1509692123.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:23.959Z,1509692123.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:24.363Z,1509692124.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:24.763Z,1509692124.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:25.164Z,1509692125.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:25.562Z,1509692125.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:25.956Z,1509692125.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:26.355Z,1509692126.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:26.756Z,1509692126.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:27.162Z,1509692127.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:27.565Z,1509692127.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:27.974Z,1509692127.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:28.374Z,1509692128.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:28.755Z,1509692128.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:29.159Z,1509692129.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:29.556Z,1509692129.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:29.979Z,1509692129.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:30.364Z,1509692130.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:30.787Z,1509692130.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:31.167Z,1509692131.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:31.538Z,1509692131.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:31.975Z,1509692131.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:32.360Z,1509692132.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:32.771Z,1509692132.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:33.195Z,1509692133.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:33.557Z,1509692133.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:33.962Z,1509692133.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:34.356Z,1509692134.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:34.749Z,1509692134.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:35.151Z,1509692135.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:35.559Z,1509692135.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:35.953Z,1509692135.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:36.356Z,1509692136.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:36.757Z,1509692136.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:37.155Z,1509692137.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:37.558Z,1509692137.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:37.953Z,1509692137.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:38.347Z,1509692138.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:38.753Z,1509692138.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:39.152Z,1509692139.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:39.563Z,1509692139.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:39.962Z,1509692139.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:40.359Z,1509692140.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:40.759Z,1509692140.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:41.158Z,1509692141.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:41.559Z,1509692141.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:41.953Z,1509692141.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:42.366Z,1509692142.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:42.760Z,1509692142.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:43.167Z,1509692143.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:43.554Z,1509692143.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:43.995Z,1509692143.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:44.353Z,1509692144.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:44.762Z,1509692144.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:47.867Z,1509692147.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:48.049Z,1509692148.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:48.420Z,1509692148.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:48.821Z,1509692148.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:49.209Z,1509692149.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:49.641Z,1509692149.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:50.007Z,1509692150.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:50.454Z,1509692150.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:50.844Z,1509692150.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:51.217Z,1509692151.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:51.608Z,1509692151.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:52.014Z,1509692152.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:52.412Z,1509692152.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:52.811Z,1509692152.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:53.219Z,1509692153.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:53.617Z,1509692153.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:54.023Z,1509692154.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:54.407Z,1509692154.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:54.805Z,1509692154.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:55.219Z,1509692155.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:55.622Z,1509692155.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:56.016Z,1509692156.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:56.409Z,1509692156.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:56.814Z,1509692156.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:57.226Z,1509692157.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:57.643Z,1509692157.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:58.019Z,1509692158.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:58.405Z,1509692158.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:58.807Z,1509692158.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:59.226Z,1509692159.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:55:59.619Z,1509692159.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:00.057Z,1509692160.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:00.419Z,1509692160.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:00.837Z,1509692160.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:01.265Z,1509692161.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:01.665Z,1509692161.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:02.031Z,1509692162.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:02.428Z,1509692162.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:02.883Z,1509692162.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:03.290Z,1509692163.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:03.623Z,1509692163.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:04.016Z,1509692164.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:04.474Z,1509692164.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:04.870Z,1509692164.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:05.243Z,1509692165.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:05.657Z,1509692165.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:06.039Z,1509692166.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:06.441Z,1509692166.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:06.881Z,1509692166.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:07.252Z,1509692167.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:07.657Z,1509692167.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:08.049Z,1509692168.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:08.457Z,1509692168.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:08.878Z,1509692168.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:09.244Z,1509692169.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:09.644Z,1509692169.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:10.046Z,1509692170.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:10.448Z,1509692170.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:10.845Z,1509692170.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:11.249Z,1509692171.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:11.637Z,1509692171.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:12.019Z,1509692172.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:12.457Z,1509692172.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:12.819Z,1509692172.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:13.241Z,1509692173.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:13.639Z,1509692173.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:14.053Z,1509692174.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:14.439Z,1509692174.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:14.844Z,1509692174.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:15.226Z,1509692175.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:15.226Z,1509692175.226 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 134
2017-11-03T06:56:15.226Z,1509692175.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:56:15.250Z,1509692175.250 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:15.250Z,1509692175.250 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 134
2017-11-03T06:56:15.250Z,1509692175.250 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:56:15.257Z,1509692175.257 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:15.258Z,1509692175.258 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 134
2017-11-03T06:56:15.258Z,1509692175.258 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:56:15.369Z,1509692175.369 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:56:15.369Z,1509692175.369 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:56:15.369Z,1509692175.369 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:56:15.697Z,1509692175.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:56:15.697Z,1509692175.697 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 134
2017-11-03T06:56:15.697Z,1509692175.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:56:15.697Z,1509692175.697 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 134
2017-11-03T06:56:15.698Z,1509692175.698 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:56:15.698Z,1509692175.698 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 134
2017-11-03T06:56:16.018Z,1509692176.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:56:16.019Z,1509692176.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:56:16.019Z,1509692176.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:56:16.019Z,1509692176.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:56:16.020Z,1509692176.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:56:16.020Z,1509692176.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:56:16.021Z,1509692176.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:56:16.021Z,1509692176.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:56:16.022Z,1509692176.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:56:16.459Z,1509692176.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:56:16.465Z,1509692176.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:16.809Z,1509692176.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:56:16.810Z,1509692176.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:17.220Z,1509692177.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:56:17.221Z,1509692177.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:17.620Z,1509692177.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:56:17.621Z,1509692177.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:18.075Z,1509692178.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:56:18.076Z,1509692178.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:18.415Z,1509692178.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:56:18.416Z,1509692178.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:18.853Z,1509692178.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:56:18.854Z,1509692178.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:19.222Z,1509692179.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:56:19.224Z,1509692179.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:19.664Z,1509692179.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:56:19.665Z,1509692179.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:20.060Z,1509692180.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:56:20.061Z,1509692180.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:20.411Z,1509692180.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:56:20.413Z,1509692180.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:20.813Z,1509692180.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:56:20.814Z,1509692180.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:21.224Z,1509692181.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:56:21.225Z,1509692181.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:21.630Z,1509692181.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:56:21.631Z,1509692181.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:22.021Z,1509692182.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:56:22.022Z,1509692182.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:22.412Z,1509692182.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:56:22.413Z,1509692182.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:22.814Z,1509692182.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:56:22.815Z,1509692182.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:23.221Z,1509692183.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:56:23.221Z,1509692183.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:23.623Z,1509692183.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:56:23.624Z,1509692183.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:24.019Z,1509692184.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:56:24.020Z,1509692184.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:24.411Z,1509692184.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:56:24.412Z,1509692184.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:24.823Z,1509692184.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:56:24.824Z,1509692184.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:25.219Z,1509692185.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:56:25.220Z,1509692185.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:25.619Z,1509692185.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:56:25.620Z,1509692185.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:26.024Z,1509692186.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:56:26.025Z,1509692186.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:26.412Z,1509692186.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:56:26.413Z,1509692186.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:26.811Z,1509692186.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:56:26.813Z,1509692186.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:27.227Z,1509692187.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:56:27.229Z,1509692187.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:27.630Z,1509692187.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:56:27.631Z,1509692187.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:28.020Z,1509692188.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:56:28.021Z,1509692188.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:28.414Z,1509692188.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:56:28.415Z,1509692188.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:28.812Z,1509692188.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:56:28.813Z,1509692188.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:29.221Z,1509692189.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T06:56:29.222Z,1509692189.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:29.626Z,1509692189.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:56:29.627Z,1509692189.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:30.021Z,1509692190.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T06:56:30.022Z,1509692190.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:30.422Z,1509692190.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:56:30.423Z,1509692190.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:30.830Z,1509692190.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T06:56:30.831Z,1509692190.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:31.220Z,1509692191.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T06:56:31.221Z,1509692191.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:31.627Z,1509692191.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T06:56:31.628Z,1509692191.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:32.085Z,1509692192.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T06:56:32.086Z,1509692192.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:32.416Z,1509692192.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T06:56:32.417Z,1509692192.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:32.838Z,1509692192.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T06:56:32.839Z,1509692192.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:33.224Z,1509692193.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T06:56:33.225Z,1509692193.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:33.656Z,1509692193.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T06:56:33.657Z,1509692193.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:34.067Z,1509692194.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T06:56:34.068Z,1509692194.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:34.417Z,1509692194.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T06:56:34.418Z,1509692194.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:34.816Z,1509692194.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T06:56:34.817Z,1509692194.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:35.220Z,1509692195.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T06:56:35.221Z,1509692195.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:35.623Z,1509692195.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:36.025Z,1509692196.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:36.420Z,1509692196.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:36.798Z,1509692196.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:37.219Z,1509692197.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:37.627Z,1509692197.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:38.020Z,1509692198.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:38.418Z,1509692198.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:38.818Z,1509692198.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:39.223Z,1509692199.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:39.627Z,1509692199.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:40.046Z,1509692200.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:40.399Z,1509692200.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:40.799Z,1509692200.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:41.227Z,1509692201.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:41.629Z,1509692201.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:42.027Z,1509692202.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:42.411Z,1509692202.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:42.826Z,1509692202.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:43.230Z,1509692203.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:43.627Z,1509692203.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:44.028Z,1509692204.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:44.401Z,1509692204.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:44.846Z,1509692204.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:47.934Z,1509692207.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:48.103Z,1509692208.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:48.504Z,1509692208.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:48.895Z,1509692208.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:49.290Z,1509692209.290 [BPC1](ERROR): Failed to receive battery data
2017-11-03T06:56:49.290Z,1509692209.290 [BPC1] Communications Fault, FailCount= 1
2017-11-03T06:56:49.290Z,1509692209.290 [BPC1](ERROR): Communications Fault
2017-11-03T06:56:49.298Z,1509692209.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:49.385Z,1509692209.385 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T06:56:49.698Z,1509692209.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:50.093Z,1509692210.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:50.503Z,1509692210.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:50.589Z,1509692210.589 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T06:56:50.589Z,1509692210.589 [BPC1] No Fault, FailCount= 1
2017-11-03T06:56:50.974Z,1509692210.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:51.304Z,1509692211.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:51.700Z,1509692211.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:52.103Z,1509692212.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:52.496Z,1509692212.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:52.903Z,1509692212.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:53.303Z,1509692213.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:53.703Z,1509692213.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:54.055Z,1509692214.055 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T06:56:54.055Z,1509692214.055 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T06:56:54.055Z,1509692214.055 [DropWeight](ERROR): Hardware Fault
2017-11-03T06:56:54.128Z,1509692214.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:54.219Z,1509692214.219 [CBIT](INFO): Critical error at 20171103T065654
2017-11-03T06:56:54.221Z,1509692214.221 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T06:56:54.221Z,1509692214.221 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T06:56:54.498Z,1509692214.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:54.587Z,1509692214.587 [CBIT](INFO): Critical error at 20171103T065654
2017-11-03T06:56:54.900Z,1509692214.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:55.338Z,1509692215.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:55.696Z,1509692215.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:56.097Z,1509692216.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:56.505Z,1509692216.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:56.907Z,1509692216.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:57.303Z,1509692217.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:57.703Z,1509692217.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:58.103Z,1509692218.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:58.497Z,1509692218.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:58.903Z,1509692218.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:59.307Z,1509692219.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:56:59.734Z,1509692219.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:00.107Z,1509692220.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:00.496Z,1509692220.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:00.897Z,1509692220.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:01.301Z,1509692221.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:01.702Z,1509692221.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:02.099Z,1509692222.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:02.508Z,1509692222.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:02.907Z,1509692222.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:03.308Z,1509692223.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:03.703Z,1509692223.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:04.103Z,1509692224.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:04.501Z,1509692224.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:04.899Z,1509692224.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:05.315Z,1509692225.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:05.771Z,1509692225.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:06.105Z,1509692226.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:06.537Z,1509692226.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:06.900Z,1509692226.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:07.336Z,1509692227.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:07.737Z,1509692227.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:08.099Z,1509692228.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:08.515Z,1509692228.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:08.908Z,1509692228.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:09.319Z,1509692229.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:09.697Z,1509692229.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:10.099Z,1509692230.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:10.499Z,1509692230.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:10.900Z,1509692230.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:11.307Z,1509692231.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:11.711Z,1509692231.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:12.109Z,1509692232.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:12.519Z,1509692232.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:12.899Z,1509692232.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:13.301Z,1509692233.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:13.699Z,1509692233.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:14.102Z,1509692234.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:14.509Z,1509692234.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:14.907Z,1509692234.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:15.304Z,1509692235.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:15.703Z,1509692235.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:16.101Z,1509692236.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:16.500Z,1509692236.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:16.903Z,1509692236.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:17.308Z,1509692237.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:17.719Z,1509692237.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:18.108Z,1509692238.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:18.562Z,1509692238.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:18.905Z,1509692238.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:19.323Z,1509692239.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:19.686Z,1509692239.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:20.120Z,1509692240.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:20.512Z,1509692240.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:20.952Z,1509692240.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:21.315Z,1509692241.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:21.707Z,1509692241.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:22.109Z,1509692242.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:22.510Z,1509692242.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:22.883Z,1509692242.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:23.312Z,1509692243.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:23.714Z,1509692243.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:24.115Z,1509692244.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:24.486Z,1509692244.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:24.882Z,1509692244.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:25.307Z,1509692245.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:25.687Z,1509692245.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:26.086Z,1509692246.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:26.510Z,1509692246.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:26.919Z,1509692246.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:27.312Z,1509692247.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:27.714Z,1509692247.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:28.109Z,1509692248.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:28.492Z,1509692248.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:28.889Z,1509692248.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:29.315Z,1509692249.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:29.710Z,1509692249.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:30.108Z,1509692250.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:30.513Z,1509692250.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:30.889Z,1509692250.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:31.291Z,1509692251.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:31.771Z,1509692251.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:32.090Z,1509692252.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:32.546Z,1509692252.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:32.919Z,1509692252.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:33.346Z,1509692253.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:33.735Z,1509692253.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:34.089Z,1509692254.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:34.491Z,1509692254.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:34.918Z,1509692254.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:35.315Z,1509692255.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:35.720Z,1509692255.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:36.113Z,1509692256.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:36.515Z,1509692256.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:36.915Z,1509692256.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:37.295Z,1509692257.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:37.693Z,1509692257.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:38.119Z,1509692258.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:38.515Z,1509692258.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:38.913Z,1509692258.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:39.313Z,1509692259.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:39.688Z,1509692259.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:40.094Z,1509692260.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:40.491Z,1509692260.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:40.915Z,1509692260.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:41.314Z,1509692261.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:41.719Z,1509692261.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:42.113Z,1509692262.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:42.515Z,1509692262.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:42.895Z,1509692262.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:43.291Z,1509692263.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:43.690Z,1509692263.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:44.138Z,1509692264.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:44.523Z,1509692264.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:44.527Z,1509692264.527 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T06:57:44.527Z,1509692264.527 [Default:CheckIn:C.Wait] Stopped
2017-11-03T06:57:44.527Z,1509692264.527 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T06:57:44.527Z,1509692264.527 [Default:CheckIn:D] Running Loop=1
2017-11-03T06:57:44.962Z,1509692264.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:44.965Z,1509692264.965 [Default:CheckIn:D] Stopped
2017-11-03T06:57:44.965Z,1509692264.965 [Default:CheckIn:E] Running Loop=1
2017-11-03T06:57:47.989Z,1509692267.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:47.992Z,1509692267.992 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 402.623307 min 
2017-11-03T06:57:47.992Z,1509692267.992 [Default:CheckIn:E] Stopped
2017-11-03T06:57:47.992Z,1509692267.992 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T06:57:47.992Z,1509692267.992 [Default:CheckIn] Stopped
2017-11-03T06:57:47.993Z,1509692267.993 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T06:57:47.993Z,1509692267.993 [Default:CheckIn](INFO): Running loop #40
2017-11-03T06:57:47.993Z,1509692267.993 [Default:CheckIn] Running Loop=40
2017-11-03T06:57:47.993Z,1509692267.993 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T06:57:47.993Z,1509692267.993 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T06:57:48.131Z,1509692268.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:48.555Z,1509692268.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:48.940Z,1509692268.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:49.363Z,1509692269.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:49.785Z,1509692269.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:50.142Z,1509692270.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:50.524Z,1509692270.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:50.914Z,1509692270.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:51.323Z,1509692271.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:51.723Z,1509692271.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:52.123Z,1509692272.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:52.544Z,1509692272.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:52.943Z,1509692272.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:53.346Z,1509692273.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:53.715Z,1509692273.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:54.114Z,1509692274.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:54.514Z,1509692274.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:54.915Z,1509692274.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:55.367Z,1509692275.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:55.745Z,1509692275.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:56.150Z,1509692276.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:56.523Z,1509692276.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:56.919Z,1509692276.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:57.319Z,1509692277.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:57.720Z,1509692277.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:58.118Z,1509692278.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:58.550Z,1509692278.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:58.953Z,1509692278.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:59.351Z,1509692279.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:57:59.718Z,1509692279.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:00.119Z,1509692280.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:00.523Z,1509692280.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:00.970Z,1509692280.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:01.335Z,1509692281.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:01.735Z,1509692281.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:02.151Z,1509692282.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:02.523Z,1509692282.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:02.954Z,1509692282.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:03.358Z,1509692283.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:03.723Z,1509692283.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:04.123Z,1509692284.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:04.525Z,1509692284.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:04.935Z,1509692284.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:05.334Z,1509692285.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:05.722Z,1509692285.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:06.123Z,1509692286.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:06.523Z,1509692286.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:06.924Z,1509692286.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:07.335Z,1509692287.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:07.738Z,1509692287.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:08.134Z,1509692288.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:08.522Z,1509692288.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:08.923Z,1509692288.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:09.326Z,1509692289.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:09.724Z,1509692289.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:10.123Z,1509692290.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:10.534Z,1509692290.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:10.935Z,1509692290.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:11.329Z,1509692291.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:11.723Z,1509692291.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:12.124Z,1509692292.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:12.530Z,1509692292.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:12.920Z,1509692292.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:13.335Z,1509692293.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:13.776Z,1509692293.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:14.129Z,1509692294.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:14.526Z,1509692294.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:14.955Z,1509692294.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:15.326Z,1509692295.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:15.727Z,1509692295.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:16.162Z,1509692296.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:16.532Z,1509692296.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:16.967Z,1509692296.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:17.366Z,1509692297.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:17.726Z,1509692297.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:18.131Z,1509692298.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:18.524Z,1509692298.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:18.925Z,1509692298.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:19.339Z,1509692299.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:19.761Z,1509692299.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:20.138Z,1509692300.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:20.523Z,1509692300.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:20.931Z,1509692300.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:21.326Z,1509692301.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:21.726Z,1509692301.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:22.123Z,1509692302.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:22.531Z,1509692302.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:22.933Z,1509692302.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:23.338Z,1509692303.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:23.720Z,1509692303.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:24.124Z,1509692304.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:24.522Z,1509692304.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:24.923Z,1509692304.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:25.333Z,1509692305.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:25.732Z,1509692305.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:26.132Z,1509692306.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:26.531Z,1509692306.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:26.924Z,1509692306.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:27.326Z,1509692307.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:27.727Z,1509692307.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:28.124Z,1509692308.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:28.573Z,1509692308.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:28.982Z,1509692308.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:29.339Z,1509692309.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:29.727Z,1509692309.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:30.166Z,1509692310.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:30.525Z,1509692310.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:30.966Z,1509692310.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:31.374Z,1509692311.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:31.735Z,1509692311.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:32.136Z,1509692312.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:32.531Z,1509692312.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:32.931Z,1509692312.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:33.326Z,1509692313.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:33.731Z,1509692313.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:34.124Z,1509692314.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:34.533Z,1509692314.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:34.935Z,1509692314.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:35.335Z,1509692315.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:35.726Z,1509692315.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:36.131Z,1509692316.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:36.524Z,1509692316.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:36.925Z,1509692316.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:37.343Z,1509692317.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:37.735Z,1509692317.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:38.142Z,1509692318.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:38.531Z,1509692318.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:38.923Z,1509692318.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:39.326Z,1509692319.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:39.731Z,1509692319.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:40.123Z,1509692320.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:40.543Z,1509692320.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:40.935Z,1509692320.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:41.335Z,1509692321.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:41.725Z,1509692321.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:42.131Z,1509692322.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:42.567Z,1509692322.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:42.925Z,1509692322.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:43.336Z,1509692323.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:43.786Z,1509692323.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:44.136Z,1509692324.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:44.531Z,1509692324.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:44.966Z,1509692324.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:48.029Z,1509692328.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:48.222Z,1509692328.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:48.623Z,1509692328.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:48.990Z,1509692328.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:49.399Z,1509692329.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:49.787Z,1509692329.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:50.181Z,1509692330.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:50.582Z,1509692330.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:50.978Z,1509692330.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:51.391Z,1509692331.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:51.788Z,1509692331.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:52.191Z,1509692332.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:52.581Z,1509692332.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:52.987Z,1509692332.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:53.379Z,1509692333.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:53.781Z,1509692333.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:54.191Z,1509692334.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:54.591Z,1509692334.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:54.992Z,1509692334.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:55.379Z,1509692335.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:55.780Z,1509692335.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:56.194Z,1509692336.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:56.588Z,1509692336.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:56.999Z,1509692336.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:57.383Z,1509692337.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:57.787Z,1509692337.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:58.139Z,1509692338.139 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T06:58:58.139Z,1509692338.139 [NAL9602] Data Fault, FailCount= 2
2017-11-03T06:58:58.139Z,1509692338.139 [NAL9602](ERROR): Data Fault
2017-11-03T06:58:58.196Z,1509692338.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:58.297Z,1509692338.297 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T06:58:58.541Z,1509692338.541 [NAL9602](INFO): Powering down
2017-11-03T06:58:58.588Z,1509692338.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:59.031Z,1509692339.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:59.386Z,1509692339.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:58:59.476Z,1509692339.476 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T06:58:59.476Z,1509692339.476 [NAL9602] No Fault, FailCount= 2
2017-11-03T06:58:59.781Z,1509692339.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:00.182Z,1509692340.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:00.607Z,1509692340.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:00.982Z,1509692340.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:01.421Z,1509692341.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:01.779Z,1509692341.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:02.207Z,1509692342.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:02.621Z,1509692342.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:02.987Z,1509692342.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:03.382Z,1509692343.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:03.782Z,1509692343.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:04.186Z,1509692344.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:04.579Z,1509692344.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:04.982Z,1509692344.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:05.387Z,1509692345.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:05.782Z,1509692345.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:06.182Z,1509692346.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:06.587Z,1509692346.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:06.982Z,1509692346.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:07.383Z,1509692347.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:07.785Z,1509692347.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:08.183Z,1509692348.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:08.583Z,1509692348.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:08.983Z,1509692348.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:09.383Z,1509692349.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:09.782Z,1509692349.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:10.183Z,1509692350.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:10.583Z,1509692350.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:10.983Z,1509692350.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:11.387Z,1509692351.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:11.782Z,1509692351.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:12.182Z,1509692352.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:12.587Z,1509692352.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:12.983Z,1509692352.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:13.383Z,1509692353.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:13.807Z,1509692353.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:14.183Z,1509692354.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:14.585Z,1509692354.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:15.011Z,1509692355.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:15.388Z,1509692355.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:15.789Z,1509692355.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:16.206Z,1509692356.206 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:16.207Z,1509692356.207 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 135
2017-11-03T06:59:16.207Z,1509692356.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T06:59:16.209Z,1509692356.209 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:16.209Z,1509692356.209 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 135
2017-11-03T06:59:16.209Z,1509692356.209 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T06:59:16.211Z,1509692356.211 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:16.211Z,1509692356.211 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 135
2017-11-03T06:59:16.211Z,1509692356.211 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T06:59:16.312Z,1509692356.312 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T06:59:16.313Z,1509692356.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T06:59:16.313Z,1509692356.313 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T06:59:16.680Z,1509692356.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T06:59:16.680Z,1509692356.680 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 135
2017-11-03T06:59:16.681Z,1509692356.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T06:59:16.681Z,1509692356.681 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 135
2017-11-03T06:59:16.681Z,1509692356.681 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T06:59:16.681Z,1509692356.681 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 135
2017-11-03T06:59:17.009Z,1509692357.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T06:59:17.010Z,1509692357.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:59:17.010Z,1509692357.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:59:17.011Z,1509692357.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T06:59:17.011Z,1509692357.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:59:17.011Z,1509692357.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:59:17.012Z,1509692357.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T06:59:17.012Z,1509692357.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T06:59:17.013Z,1509692357.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T06:59:17.410Z,1509692357.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T06:59:17.411Z,1509692357.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:17.796Z,1509692357.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T06:59:17.797Z,1509692357.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:18.193Z,1509692358.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T06:59:18.194Z,1509692358.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:18.568Z,1509692358.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T06:59:18.569Z,1509692358.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:18.969Z,1509692358.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T06:59:18.970Z,1509692358.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:19.377Z,1509692359.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T06:59:19.377Z,1509692359.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:19.798Z,1509692359.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T06:59:19.799Z,1509692359.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:20.169Z,1509692360.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T06:59:20.170Z,1509692360.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:20.577Z,1509692360.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T06:59:20.577Z,1509692360.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:20.976Z,1509692360.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T06:59:20.977Z,1509692360.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:21.369Z,1509692361.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T06:59:21.370Z,1509692361.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:21.777Z,1509692361.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T06:59:21.778Z,1509692361.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:22.176Z,1509692362.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T06:59:22.177Z,1509692362.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:22.569Z,1509692362.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T06:59:22.570Z,1509692362.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:22.969Z,1509692362.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T06:59:22.970Z,1509692362.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:23.368Z,1509692363.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T06:59:23.369Z,1509692363.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:23.769Z,1509692363.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T06:59:23.770Z,1509692363.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:24.169Z,1509692364.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T06:59:24.170Z,1509692364.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:24.569Z,1509692364.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T06:59:24.570Z,1509692364.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:24.977Z,1509692364.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T06:59:24.978Z,1509692364.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:25.377Z,1509692365.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T06:59:25.378Z,1509692365.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:25.768Z,1509692365.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T06:59:25.769Z,1509692365.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:26.169Z,1509692366.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T06:59:26.170Z,1509692366.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:26.574Z,1509692366.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T06:59:26.575Z,1509692366.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:26.973Z,1509692366.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T06:59:26.974Z,1509692366.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:27.373Z,1509692367.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T06:59:27.374Z,1509692367.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:27.774Z,1509692367.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T06:59:27.775Z,1509692367.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:28.177Z,1509692368.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T06:59:28.178Z,1509692368.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:28.573Z,1509692368.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T06:59:28.574Z,1509692368.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:28.943Z,1509692368.943 [NAL9602](INFO): Powering up NAL9602
2017-11-03T06:59:28.975Z,1509692368.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T06:59:28.976Z,1509692368.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:29.374Z,1509692369.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T06:59:29.374Z,1509692369.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:29.843Z,1509692369.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T06:59:29.844Z,1509692369.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:30.174Z,1509692370.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T06:59:30.175Z,1509692370.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:30.603Z,1509692370.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T06:59:30.604Z,1509692370.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:30.978Z,1509692370.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T06:59:30.979Z,1509692370.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:31.410Z,1509692371.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T06:59:31.410Z,1509692371.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:31.805Z,1509692371.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T06:59:31.806Z,1509692371.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:32.177Z,1509692372.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T06:59:32.178Z,1509692372.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:32.578Z,1509692372.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T06:59:32.579Z,1509692372.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:32.977Z,1509692372.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T06:59:32.978Z,1509692372.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:33.376Z,1509692373.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T06:59:33.377Z,1509692373.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:33.778Z,1509692373.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T06:59:33.779Z,1509692373.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:34.178Z,1509692374.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T06:59:34.178Z,1509692374.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:34.577Z,1509692374.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T06:59:34.578Z,1509692374.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:34.978Z,1509692374.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T06:59:34.979Z,1509692374.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:35.377Z,1509692375.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T06:59:35.378Z,1509692375.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:35.777Z,1509692375.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T06:59:35.778Z,1509692375.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:36.174Z,1509692376.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T06:59:36.175Z,1509692376.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:36.578Z,1509692376.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:36.979Z,1509692376.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:37.374Z,1509692377.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:37.777Z,1509692377.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:38.182Z,1509692378.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:38.578Z,1509692378.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:38.978Z,1509692378.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:39.406Z,1509692379.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:39.738Z,1509692379.738 [NAL9602](INFO): NAL9602 initialized
2017-11-03T06:59:39.782Z,1509692379.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:40.178Z,1509692380.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:40.597Z,1509692380.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:40.994Z,1509692380.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:41.399Z,1509692381.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:41.771Z,1509692381.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:42.190Z,1509692382.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:42.588Z,1509692382.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:42.971Z,1509692382.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:43.390Z,1509692383.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:43.887Z,1509692383.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:44.194Z,1509692384.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:44.641Z,1509692384.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:44.975Z,1509692384.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:48.091Z,1509692388.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:48.249Z,1509692388.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:48.694Z,1509692388.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:49.065Z,1509692389.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:49.463Z,1509692389.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:49.847Z,1509692389.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:50.248Z,1509692390.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:50.648Z,1509692390.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:51.032Z,1509692391.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:51.453Z,1509692391.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:51.856Z,1509692391.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:52.262Z,1509692392.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:52.660Z,1509692392.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:53.032Z,1509692393.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:53.431Z,1509692393.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:53.855Z,1509692393.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:54.231Z,1509692394.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:54.657Z,1509692394.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:55.057Z,1509692395.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:55.455Z,1509692395.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:55.851Z,1509692395.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:56.253Z,1509692396.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:56.631Z,1509692396.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:57.053Z,1509692397.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:57.451Z,1509692397.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:57.863Z,1509692397.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:58.258Z,1509692398.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:58.667Z,1509692398.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:59.055Z,1509692399.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:59.451Z,1509692399.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T06:59:59.848Z,1509692399.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:00.286Z,1509692400.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:00.687Z,1509692400.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:01.065Z,1509692401.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:01.459Z,1509692401.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:01.875Z,1509692401.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:02.235Z,1509692402.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:02.683Z,1509692402.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:03.075Z,1509692403.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:03.434Z,1509692403.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:03.860Z,1509692403.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:04.266Z,1509692404.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:04.664Z,1509692404.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:05.038Z,1509692405.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:05.437Z,1509692405.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:05.834Z,1509692405.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:06.238Z,1509692406.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:06.666Z,1509692406.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:07.063Z,1509692407.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:07.459Z,1509692407.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:07.837Z,1509692407.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:08.234Z,1509692408.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:08.646Z,1509692408.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:09.043Z,1509692409.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:09.433Z,1509692409.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:09.867Z,1509692409.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:10.266Z,1509692410.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:10.669Z,1509692410.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:11.039Z,1509692411.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:11.447Z,1509692411.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:11.838Z,1509692411.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:12.238Z,1509692412.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:12.667Z,1509692412.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:13.048Z,1509692413.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:13.466Z,1509692413.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:13.843Z,1509692413.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:14.238Z,1509692414.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:14.643Z,1509692414.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:15.075Z,1509692415.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:15.486Z,1509692415.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:15.868Z,1509692415.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:16.287Z,1509692416.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:16.651Z,1509692416.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:17.075Z,1509692417.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:17.474Z,1509692417.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:17.839Z,1509692417.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:18.243Z,1509692418.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:18.668Z,1509692418.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:19.052Z,1509692419.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:19.470Z,1509692419.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:19.839Z,1509692419.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:20.238Z,1509692420.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:20.639Z,1509692420.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:21.039Z,1509692421.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:21.438Z,1509692421.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:21.869Z,1509692421.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:22.252Z,1509692422.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:22.652Z,1509692422.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:23.043Z,1509692423.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:23.443Z,1509692423.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:23.839Z,1509692423.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:24.243Z,1509692424.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:24.652Z,1509692424.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:25.043Z,1509692425.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:25.452Z,1509692425.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:25.843Z,1509692425.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:26.238Z,1509692426.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:26.639Z,1509692426.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:27.047Z,1509692427.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:27.438Z,1509692427.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:27.869Z,1509692427.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:28.252Z,1509692428.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:28.671Z,1509692428.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:29.039Z,1509692429.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:29.516Z,1509692429.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:29.846Z,1509692429.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:30.278Z,1509692430.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:30.649Z,1509692430.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:31.071Z,1509692431.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:31.479Z,1509692431.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:31.847Z,1509692431.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:32.245Z,1509692432.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:32.645Z,1509692432.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:33.043Z,1509692433.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:33.445Z,1509692433.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:33.849Z,1509692433.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:34.248Z,1509692434.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:34.654Z,1509692434.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:35.043Z,1509692435.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:35.442Z,1509692435.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:35.846Z,1509692435.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:36.245Z,1509692436.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:36.648Z,1509692436.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:37.046Z,1509692437.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:37.451Z,1509692437.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:37.843Z,1509692437.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:38.240Z,1509692438.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:38.646Z,1509692438.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:39.046Z,1509692439.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:39.447Z,1509692439.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:39.849Z,1509692439.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:40.255Z,1509692440.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:40.649Z,1509692440.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:41.045Z,1509692441.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:41.446Z,1509692441.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:41.846Z,1509692441.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:42.245Z,1509692442.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:42.649Z,1509692442.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:43.052Z,1509692443.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:43.495Z,1509692443.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:43.849Z,1509692443.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:44.245Z,1509692444.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:44.676Z,1509692444.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:45.046Z,1509692445.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:48.155Z,1509692448.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:48.363Z,1509692448.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:48.782Z,1509692448.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:49.141Z,1509692449.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:49.535Z,1509692449.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:49.931Z,1509692449.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:50.331Z,1509692450.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:50.739Z,1509692450.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:51.139Z,1509692451.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:51.536Z,1509692451.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:51.930Z,1509692451.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:52.336Z,1509692452.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:52.734Z,1509692452.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:53.131Z,1509692453.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:53.540Z,1509692453.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:53.943Z,1509692453.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:54.343Z,1509692454.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:54.736Z,1509692454.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:55.155Z,1509692455.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:55.548Z,1509692455.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:55.959Z,1509692455.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:56.351Z,1509692456.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:56.767Z,1509692456.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:57.165Z,1509692457.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:57.582Z,1509692457.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:57.955Z,1509692457.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:58.370Z,1509692458.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:58.727Z,1509692458.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:59.167Z,1509692459.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:59.543Z,1509692459.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:00:59.974Z,1509692459.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:00.347Z,1509692460.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:00.779Z,1509692460.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:01.202Z,1509692461.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:01.555Z,1509692461.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:01.987Z,1509692461.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:02.415Z,1509692462.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:02.778Z,1509692462.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:03.159Z,1509692463.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:03.564Z,1509692463.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:03.947Z,1509692463.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:04.343Z,1509692464.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:04.747Z,1509692464.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:05.145Z,1509692465.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:05.555Z,1509692465.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:05.963Z,1509692465.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:06.363Z,1509692466.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:06.757Z,1509692466.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:07.163Z,1509692467.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:07.558Z,1509692467.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:07.959Z,1509692467.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:08.362Z,1509692468.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:08.758Z,1509692468.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:09.131Z,1509692469.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:09.536Z,1509692469.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:09.952Z,1509692469.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:10.354Z,1509692470.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:10.730Z,1509692470.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:11.127Z,1509692471.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:11.554Z,1509692471.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:11.953Z,1509692471.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:12.352Z,1509692472.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:12.725Z,1509692472.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:13.123Z,1509692473.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:13.553Z,1509692473.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:13.954Z,1509692473.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:14.333Z,1509692474.333 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T07:01:14.333Z,1509692474.333 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:01:14.334Z,1509692474.334 [BPC1](ERROR): Data Fault
2017-11-03T07:01:14.364Z,1509692474.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:14.450Z,1509692474.450 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:01:14.725Z,1509692474.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:15.123Z,1509692475.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:15.529Z,1509692475.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:15.629Z,1509692475.629 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:01:15.630Z,1509692475.630 [BPC1] No Fault, FailCount= 1
2017-11-03T07:01:16.002Z,1509692476.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:16.353Z,1509692476.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:16.754Z,1509692476.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:17.127Z,1509692477.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:17.555Z,1509692477.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:17.928Z,1509692477.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:18.354Z,1509692478.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:18.726Z,1509692478.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:19.126Z,1509692479.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:19.529Z,1509692479.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:19.932Z,1509692479.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:20.354Z,1509692480.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:20.728Z,1509692480.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:21.131Z,1509692481.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:21.554Z,1509692481.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:21.953Z,1509692481.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:22.332Z,1509692482.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:22.727Z,1509692482.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:23.123Z,1509692483.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:23.553Z,1509692483.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:23.931Z,1509692483.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:24.353Z,1509692484.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:24.727Z,1509692484.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:25.130Z,1509692485.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:25.563Z,1509692485.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:25.933Z,1509692485.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:26.354Z,1509692486.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:26.728Z,1509692486.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:27.126Z,1509692487.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:27.554Z,1509692487.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:27.954Z,1509692487.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:28.335Z,1509692488.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:28.727Z,1509692488.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:29.179Z,1509692489.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:29.531Z,1509692489.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:29.959Z,1509692489.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:30.332Z,1509692490.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:30.753Z,1509692490.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:31.155Z,1509692491.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:31.533Z,1509692491.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:31.931Z,1509692491.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:32.338Z,1509692492.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:32.722Z,1509692492.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:33.126Z,1509692493.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:33.532Z,1509692493.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:33.943Z,1509692493.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:34.332Z,1509692494.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:34.721Z,1509692494.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:35.127Z,1509692495.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:35.538Z,1509692495.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:35.936Z,1509692495.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:36.332Z,1509692496.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:36.721Z,1509692496.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:37.121Z,1509692497.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:37.524Z,1509692497.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:37.931Z,1509692497.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:38.332Z,1509692498.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:38.722Z,1509692498.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:39.126Z,1509692499.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:39.538Z,1509692499.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:39.975Z,1509692499.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:40.338Z,1509692500.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:40.722Z,1509692500.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:41.129Z,1509692501.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:41.552Z,1509692501.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:41.936Z,1509692501.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:42.351Z,1509692502.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:42.775Z,1509692502.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:43.122Z,1509692503.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:43.572Z,1509692503.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:43.936Z,1509692503.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:44.355Z,1509692504.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:44.752Z,1509692504.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:45.125Z,1509692505.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:48.306Z,1509692508.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:48.473Z,1509692508.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:48.906Z,1509692508.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:49.254Z,1509692509.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:49.657Z,1509692509.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:50.056Z,1509692510.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:50.457Z,1509692510.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:50.882Z,1509692510.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:51.261Z,1509692511.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x8544 got:0x58907
2017-11-03T07:01:51.279Z,1509692511.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:51.665Z,1509692511.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:52.059Z,1509692512.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:52.459Z,1509692512.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:52.866Z,1509692512.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:53.259Z,1509692513.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:53.673Z,1509692513.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:54.069Z,1509692514.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:54.469Z,1509692514.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:54.573Z,1509692514.573 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T07:01:54.870Z,1509692514.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:55.238Z,1509692515.238 [PNI_TCM](ERROR): CRC does not match. Expected:0x3747 got:0x18715
2017-11-03T07:01:55.274Z,1509692515.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:55.685Z,1509692515.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:56.070Z,1509692516.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:56.447Z,1509692516.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:56.867Z,1509692516.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:57.286Z,1509692517.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:57.671Z,1509692517.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:58.071Z,1509692518.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:58.437Z,1509692518.437 [PNI_TCM](ERROR): CRC does not match. Expected:0x10918 got:0x37147
2017-11-03T07:01:58.469Z,1509692518.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:58.874Z,1509692518.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:59.273Z,1509692519.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:01:59.670Z,1509692519.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:00.071Z,1509692520.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:00.475Z,1509692520.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:00.902Z,1509692520.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:01.250Z,1509692521.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:01.679Z,1509692521.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:02.072Z,1509692522.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:02.483Z,1509692522.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:02.895Z,1509692522.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:03.274Z,1509692523.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:03.678Z,1509692523.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:04.051Z,1509692524.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:04.451Z,1509692524.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:04.855Z,1509692524.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:05.270Z,1509692525.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:05.673Z,1509692525.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:06.074Z,1509692526.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:06.475Z,1509692526.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:06.872Z,1509692526.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:07.251Z,1509692527.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:07.651Z,1509692527.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:08.055Z,1509692528.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:08.473Z,1509692528.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:08.874Z,1509692528.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:09.274Z,1509692529.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:09.676Z,1509692529.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:10.070Z,1509692530.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:10.450Z,1509692530.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:10.851Z,1509692530.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:11.274Z,1509692531.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:11.678Z,1509692531.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:12.076Z,1509692532.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:12.471Z,1509692532.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:12.849Z,1509692532.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:13.278Z,1509692533.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:13.653Z,1509692533.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:14.052Z,1509692534.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:14.455Z,1509692534.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:14.935Z,1509692534.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:15.259Z,1509692535.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:15.682Z,1509692535.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:16.086Z,1509692536.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:16.463Z,1509692536.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:16.891Z,1509692536.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:17.287Z,1509692537.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:17.287Z,1509692537.287 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 136
2017-11-03T07:02:17.287Z,1509692537.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:02:17.289Z,1509692537.289 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:17.289Z,1509692537.289 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 136
2017-11-03T07:02:17.289Z,1509692537.289 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:02:17.291Z,1509692537.291 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:17.291Z,1509692537.291 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 136
2017-11-03T07:02:17.291Z,1509692537.291 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:02:17.373Z,1509692537.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:02:17.373Z,1509692537.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:02:17.373Z,1509692537.373 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:02:17.772Z,1509692537.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:02:17.772Z,1509692537.772 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 136
2017-11-03T07:02:17.773Z,1509692537.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:02:17.773Z,1509692537.773 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 136
2017-11-03T07:02:17.773Z,1509692537.773 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:02:17.773Z,1509692537.773 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 136
2017-11-03T07:02:18.075Z,1509692538.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:02:18.075Z,1509692538.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:02:18.076Z,1509692538.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:02:18.076Z,1509692538.076 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:02:18.077Z,1509692538.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:02:18.077Z,1509692538.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:02:18.077Z,1509692538.077 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:02:18.078Z,1509692538.078 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:02:18.078Z,1509692538.078 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:02:18.464Z,1509692538.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:02:18.469Z,1509692538.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:18.853Z,1509692538.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:02:18.854Z,1509692538.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:19.256Z,1509692539.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:02:19.257Z,1509692539.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:19.667Z,1509692539.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:02:19.668Z,1509692539.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:20.054Z,1509692540.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:02:20.055Z,1509692540.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:20.452Z,1509692540.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:02:20.453Z,1509692540.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:20.870Z,1509692540.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:02:20.871Z,1509692540.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:21.287Z,1509692541.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:02:21.288Z,1509692541.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:21.657Z,1509692541.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-03T07:02:21.675Z,1509692541.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:02:21.676Z,1509692541.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:22.055Z,1509692542.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:02:22.056Z,1509692542.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:22.456Z,1509692542.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:02:22.457Z,1509692542.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:22.870Z,1509692542.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:02:22.871Z,1509692542.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:23.254Z,1509692543.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:02:23.255Z,1509692543.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:23.670Z,1509692543.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:02:23.671Z,1509692543.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:24.062Z,1509692544.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:02:24.063Z,1509692544.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:24.486Z,1509692544.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:02:24.487Z,1509692544.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:24.870Z,1509692544.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:02:24.871Z,1509692544.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:25.252Z,1509692545.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:02:25.253Z,1509692545.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:25.654Z,1509692545.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:02:25.655Z,1509692545.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:26.070Z,1509692546.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:02:26.071Z,1509692546.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:26.455Z,1509692546.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T07:02:26.456Z,1509692546.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:26.870Z,1509692546.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:02:26.871Z,1509692546.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:27.270Z,1509692547.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:02:27.271Z,1509692547.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:27.687Z,1509692547.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:02:27.687Z,1509692547.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:28.070Z,1509692548.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:02:28.071Z,1509692548.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:28.446Z,1509692548.446 [PNI_TCM](ERROR): CRC does not match. Expected:0x37562 got:0x45584
2017-11-03T07:02:28.470Z,1509692548.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:02:28.471Z,1509692548.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:28.850Z,1509692548.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:02:28.851Z,1509692548.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:29.309Z,1509692549.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:02:29.310Z,1509692549.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:29.699Z,1509692549.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:02:29.700Z,1509692549.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:30.062Z,1509692550.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:02:30.063Z,1509692550.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:30.465Z,1509692550.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:02:30.466Z,1509692550.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:30.894Z,1509692550.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:02:30.895Z,1509692550.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:31.256Z,1509692551.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:02:31.257Z,1509692551.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:31.698Z,1509692551.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:02:31.699Z,1509692551.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:32.093Z,1509692552.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:02:32.094Z,1509692552.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:32.470Z,1509692552.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:02:32.471Z,1509692552.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:32.865Z,1509692552.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:02:32.866Z,1509692552.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:33.274Z,1509692553.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:02:33.275Z,1509692553.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:33.665Z,1509692553.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:02:33.666Z,1509692553.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:34.070Z,1509692554.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:02:34.071Z,1509692554.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:34.457Z,1509692554.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:02:34.458Z,1509692554.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:34.854Z,1509692554.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:02:34.855Z,1509692554.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:35.255Z,1509692555.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:02:35.255Z,1509692555.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:35.691Z,1509692555.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:02:35.692Z,1509692555.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:36.055Z,1509692556.055 [PNI_TCM](ERROR): CRC does not match. Expected:0x53585 got:0x7106
2017-11-03T07:02:36.075Z,1509692556.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:02:36.076Z,1509692556.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:36.470Z,1509692556.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:02:36.471Z,1509692556.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:36.854Z,1509692556.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:02:36.855Z,1509692556.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:37.247Z,1509692557.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T07:02:37.248Z,1509692557.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:37.656Z,1509692557.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:38.055Z,1509692558.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:38.455Z,1509692558.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:38.892Z,1509692558.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:39.257Z,1509692559.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x36114 got:0x7106
2017-11-03T07:02:39.275Z,1509692559.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:39.670Z,1509692559.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:40.054Z,1509692560.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:40.471Z,1509692560.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:40.861Z,1509692560.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:41.274Z,1509692561.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:41.657Z,1509692561.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x1395 got:0x16862
2017-11-03T07:02:41.696Z,1509692561.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:42.091Z,1509692562.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:42.458Z,1509692562.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x14423 got:0x1857
2017-11-03T07:02:42.494Z,1509692562.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:42.857Z,1509692562.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:43.258Z,1509692563.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:43.671Z,1509692563.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:44.113Z,1509692564.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:44.479Z,1509692564.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:44.871Z,1509692564.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:45.314Z,1509692565.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:48.349Z,1509692568.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x28644 got:0x1857
2017-11-03T07:02:48.349Z,1509692568.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x10949 got:0x1857
2017-11-03T07:02:48.349Z,1509692568.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x12500 got:0x1857
2017-11-03T07:02:48.350Z,1509692568.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x33426 got:0x1857
2017-11-03T07:02:48.350Z,1509692568.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x42741 got:0x1857
2017-11-03T07:02:48.350Z,1509692568.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x48657 got:0x1857
2017-11-03T07:02:48.351Z,1509692568.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x53690 got:0x1857
2017-11-03T07:02:48.378Z,1509692568.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:48.382Z,1509692568.382 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T06:57:47.0Z
2017-11-03T07:02:48.382Z,1509692568.382 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T07:02:48.382Z,1509692568.382 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T07:02:48.603Z,1509692568.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:49.049Z,1509692569.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:49.103Z,1509692569.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:49.336Z,1509692569.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:49.367Z,1509692569.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:49.758Z,1509692569.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:49.779Z,1509692569.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:50.158Z,1509692570.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:50.172Z,1509692570.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:53.234Z,1509692573.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:53.261Z,1509692573.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:53.369Z,1509692573.369 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171103T001125/Courier0160.lzma
2017-11-03T07:02:53.407Z,1509692573.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:53.422Z,1509692573.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:53.800Z,1509692573.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:53.815Z,1509692573.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:54.167Z,1509692574.167 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0160.lzma.bak
2017-11-03T07:02:54.167Z,1509692574.167 [DataOverHttps](INFO): SBD MOMSN=5182975
2017-11-03T07:02:54.207Z,1509692574.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:54.236Z,1509692574.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:54.885Z,1509692574.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:54.908Z,1509692574.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:55.050Z,1509692575.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:55.082Z,1509692575.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:58.206Z,1509692578.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:58.237Z,1509692578.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:58.359Z,1509692578.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:58.406Z,1509692578.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:58.762Z,1509692578.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:58.794Z,1509692578.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:59.167Z,1509692579.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:59.192Z,1509692579.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:59.582Z,1509692579.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:02:59.598Z,1509692579.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:02:59.985Z,1509692579.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:00.001Z,1509692580.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:03.149Z,1509692583.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:03.230Z,1509692583.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:03.337Z,1509692583.337 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20171103T001125/Express0161.lzma
2017-11-03T07:03:03.359Z,1509692583.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:03.399Z,1509692583.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:03.759Z,1509692583.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:03.775Z,1509692583.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:04.135Z,1509692584.135 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0161.lzma.bak
2017-11-03T07:03:04.135Z,1509692584.135 [DataOverHttps](INFO): SBD MOMSN=5182979
2017-11-03T07:03:04.157Z,1509692584.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:04.214Z,1509692584.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:04.782Z,1509692584.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:04.805Z,1509692584.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:04.808Z,1509692584.808 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T07:03:04.808Z,1509692584.808 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T07:03:04.808Z,1509692584.808 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T07:03:04.977Z,1509692584.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:05.031Z,1509692585.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:08.059Z,1509692588.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:08.100Z,1509692588.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:08.232Z,1509692588.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:08.279Z,1509692588.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:08.635Z,1509692588.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:08.660Z,1509692588.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:09.036Z,1509692589.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:09.067Z,1509692589.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:09.435Z,1509692589.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:09.459Z,1509692589.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:09.853Z,1509692589.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:09.868Z,1509692589.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:10.257Z,1509692590.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:10.272Z,1509692590.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:10.646Z,1509692590.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:10.667Z,1509692590.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:11.032Z,1509692591.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:11.064Z,1509692591.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:11.432Z,1509692591.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:11.466Z,1509692591.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:11.836Z,1509692591.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:11.865Z,1509692591.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:12.232Z,1509692592.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:12.259Z,1509692592.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:12.646Z,1509692592.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:12.672Z,1509692592.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:13.042Z,1509692593.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:13.067Z,1509692593.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:13.446Z,1509692593.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:13.480Z,1509692593.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:13.836Z,1509692593.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:13.867Z,1509692593.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:14.232Z,1509692594.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:14.271Z,1509692594.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:14.633Z,1509692594.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:14.648Z,1509692594.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:15.033Z,1509692595.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:15.048Z,1509692595.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:15.431Z,1509692595.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:15.471Z,1509692595.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:15.847Z,1509692595.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:15.871Z,1509692595.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:15.965Z,1509692595.965 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:03:15.965Z,1509692595.965 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T07:03:16.160Z,1509692596.160 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:03:16.161Z,1509692596.161 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:03:16.161Z,1509692596.161 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:03:16.161Z,1509692596.161 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:03:16.257Z,1509692596.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:16.272Z,1509692596.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:16.654Z,1509692596.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:16.683Z,1509692596.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:17.036Z,1509692597.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:17.055Z,1509692597.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:17.439Z,1509692597.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:17.475Z,1509692597.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:17.833Z,1509692597.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:17.848Z,1509692597.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:18.236Z,1509692598.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:18.259Z,1509692598.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:18.645Z,1509692598.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:18.660Z,1509692598.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:19.046Z,1509692599.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:19.077Z,1509692599.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:19.450Z,1509692599.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:19.479Z,1509692599.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:19.836Z,1509692599.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:19.908Z,1509692599.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:20.258Z,1509692600.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:20.296Z,1509692600.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:20.409Z,1509692600.409 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:03:20.481Z,1509692600.481 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:03:20.482Z,1509692600.482 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:03:20.482Z,1509692600.482 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:03:20.483Z,1509692600.483 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:03:20.641Z,1509692600.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:20.659Z,1509692600.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:21.043Z,1509692601.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:21.091Z,1509692601.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:21.440Z,1509692601.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:21.455Z,1509692601.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:21.848Z,1509692601.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:21.902Z,1509692601.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:22.248Z,1509692602.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:22.299Z,1509692602.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:22.648Z,1509692602.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:22.663Z,1509692602.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:23.040Z,1509692603.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:23.055Z,1509692603.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:23.441Z,1509692603.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:23.456Z,1509692603.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:23.843Z,1509692603.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:23.858Z,1509692603.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:24.240Z,1509692604.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:24.255Z,1509692604.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:24.648Z,1509692604.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:24.663Z,1509692604.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:25.048Z,1509692605.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:25.067Z,1509692605.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:25.448Z,1509692605.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:25.463Z,1509692605.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:25.842Z,1509692605.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:25.857Z,1509692605.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:26.235Z,1509692606.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:26.251Z,1509692606.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:26.639Z,1509692606.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:26.655Z,1509692606.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:27.057Z,1509692607.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:27.089Z,1509692607.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:27.452Z,1509692607.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:27.477Z,1509692607.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:27.852Z,1509692607.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:27.867Z,1509692607.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:28.252Z,1509692608.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:28.267Z,1509692608.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:28.652Z,1509692608.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:28.667Z,1509692608.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:29.042Z,1509692609.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:29.063Z,1509692609.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:29.443Z,1509692609.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:29.457Z,1509692609.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:29.854Z,1509692609.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:29.869Z,1509692609.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:30.243Z,1509692610.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:30.258Z,1509692610.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:30.653Z,1509692610.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:30.668Z,1509692610.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:31.052Z,1509692611.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:31.067Z,1509692611.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:31.452Z,1509692611.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:31.467Z,1509692611.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:31.855Z,1509692611.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:31.874Z,1509692611.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:32.244Z,1509692612.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:32.259Z,1509692612.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:32.631Z,1509692612.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:32.662Z,1509692612.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:33.036Z,1509692613.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:33.063Z,1509692613.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:33.435Z,1509692613.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:33.461Z,1509692613.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:33.862Z,1509692613.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:33.883Z,1509692613.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:34.254Z,1509692614.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:34.274Z,1509692614.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:34.653Z,1509692614.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:34.730Z,1509692614.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:35.037Z,1509692615.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:35.052Z,1509692615.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:35.431Z,1509692615.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:35.483Z,1509692615.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:35.870Z,1509692615.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:35.891Z,1509692615.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:36.232Z,1509692616.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:36.287Z,1509692616.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:36.650Z,1509692616.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:36.699Z,1509692616.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:37.060Z,1509692617.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:37.075Z,1509692617.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:37.450Z,1509692617.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:37.520Z,1509692617.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:37.880Z,1509692617.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:37.937Z,1509692617.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:38.236Z,1509692618.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:38.251Z,1509692618.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:38.640Z,1509692618.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:38.655Z,1509692618.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:39.032Z,1509692619.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:39.047Z,1509692619.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:39.440Z,1509692619.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:39.475Z,1509692619.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:39.850Z,1509692619.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:39.879Z,1509692619.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:40.254Z,1509692620.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:40.277Z,1509692620.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:40.651Z,1509692620.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:40.679Z,1509692620.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:41.039Z,1509692621.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:41.075Z,1509692621.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:41.436Z,1509692621.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:41.452Z,1509692621.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:41.836Z,1509692621.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:41.877Z,1509692621.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:42.235Z,1509692622.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:42.250Z,1509692622.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:42.689Z,1509692622.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:43.060Z,1509692623.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:43.461Z,1509692623.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:43.856Z,1509692623.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:44.257Z,1509692624.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:44.671Z,1509692624.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:45.057Z,1509692625.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:45.460Z,1509692625.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:45.879Z,1509692625.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:46.247Z,1509692626.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:46.269Z,1509692626.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:46.653Z,1509692626.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:46.668Z,1509692626.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:47.033Z,1509692627.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:47.071Z,1509692627.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:47.459Z,1509692627.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:47.874Z,1509692627.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:48.260Z,1509692628.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:48.654Z,1509692628.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:48.726Z,1509692628.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:49.054Z,1509692629.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:49.111Z,1509692629.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:49.442Z,1509692629.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:49.467Z,1509692629.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:49.837Z,1509692629.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:49.918Z,1509692629.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:50.235Z,1509692630.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:50.265Z,1509692630.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:50.632Z,1509692630.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:50.671Z,1509692630.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:51.029Z,1509692631.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:51.079Z,1509692631.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:51.431Z,1509692631.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:51.467Z,1509692631.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:51.882Z,1509692631.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:51.928Z,1509692631.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:52.273Z,1509692632.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:52.669Z,1509692632.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:53.048Z,1509692633.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:53.428Z,1509692633.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:53.444Z,1509692633.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:53.835Z,1509692633.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:53.871Z,1509692633.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:54.243Z,1509692634.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:54.269Z,1509692634.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:54.646Z,1509692634.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:54.678Z,1509692634.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:55.058Z,1509692635.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:55.073Z,1509692635.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:55.446Z,1509692635.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:55.471Z,1509692635.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:55.832Z,1509692635.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:55.870Z,1509692635.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:56.235Z,1509692636.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:56.270Z,1509692636.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:56.630Z,1509692636.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:56.651Z,1509692636.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:57.033Z,1509692637.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:57.071Z,1509692637.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:57.431Z,1509692637.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:57.451Z,1509692637.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:57.846Z,1509692637.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:57.875Z,1509692637.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:58.245Z,1509692638.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:58.290Z,1509692638.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:58.644Z,1509692638.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:58.663Z,1509692638.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:59.040Z,1509692639.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:03:59.055Z,1509692639.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:59.455Z,1509692639.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:03:59.869Z,1509692639.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:00.254Z,1509692640.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:00.660Z,1509692640.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:01.064Z,1509692641.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:01.461Z,1509692641.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:01.886Z,1509692641.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:02.263Z,1509692642.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:02.657Z,1509692642.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:03.140Z,1509692643.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:03.450Z,1509692643.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:03.911Z,1509692643.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:04.261Z,1509692644.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:04.695Z,1509692644.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:05.098Z,1509692645.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:05.457Z,1509692645.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:08.741Z,1509692648.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:08.895Z,1509692648.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:09.302Z,1509692649.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:09.707Z,1509692649.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:10.104Z,1509692650.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:10.497Z,1509692650.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:10.896Z,1509692650.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:11.279Z,1509692651.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:11.711Z,1509692651.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:12.104Z,1509692652.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:12.507Z,1509692652.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:12.879Z,1509692652.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:13.284Z,1509692653.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:13.683Z,1509692653.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:14.098Z,1509692654.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:14.488Z,1509692654.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:14.896Z,1509692654.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:15.296Z,1509692655.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:15.693Z,1509692655.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:16.087Z,1509692656.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:16.493Z,1509692656.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:16.938Z,1509692656.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:17.315Z,1509692657.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:17.700Z,1509692657.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:18.115Z,1509692658.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:18.538Z,1509692658.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:18.893Z,1509692658.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:19.323Z,1509692659.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:19.723Z,1509692659.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:20.097Z,1509692660.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:20.492Z,1509692660.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:20.900Z,1509692660.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:21.306Z,1509692661.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:21.703Z,1509692661.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:22.113Z,1509692662.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:22.493Z,1509692662.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:22.894Z,1509692662.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:23.295Z,1509692663.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:23.707Z,1509692663.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:24.107Z,1509692664.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:24.497Z,1509692664.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:24.893Z,1509692664.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:25.295Z,1509692665.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:25.683Z,1509692665.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:26.096Z,1509692666.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:26.496Z,1509692666.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:26.907Z,1509692666.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:27.311Z,1509692667.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:27.707Z,1509692667.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:28.088Z,1509692668.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:28.483Z,1509692668.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:28.887Z,1509692668.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:29.286Z,1509692669.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:29.708Z,1509692669.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:30.103Z,1509692670.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:30.503Z,1509692670.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:30.893Z,1509692670.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:31.293Z,1509692671.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:31.786Z,1509692671.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:32.084Z,1509692672.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:32.523Z,1509692672.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:32.904Z,1509692672.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:33.319Z,1509692673.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:33.723Z,1509692673.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:34.107Z,1509692674.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:34.509Z,1509692674.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:34.955Z,1509692674.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:35.287Z,1509692675.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:35.708Z,1509692675.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:36.130Z,1509692676.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:36.511Z,1509692676.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:36.871Z,1509692676.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:36.885Z,1509692676.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:37.271Z,1509692677.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:37.287Z,1509692677.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:37.672Z,1509692677.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:37.711Z,1509692677.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:38.069Z,1509692678.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:38.084Z,1509692678.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:38.469Z,1509692678.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:38.483Z,1509692678.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:38.882Z,1509692678.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:38.916Z,1509692678.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:39.285Z,1509692679.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:39.315Z,1509692679.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:39.675Z,1509692679.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:39.695Z,1509692679.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:40.067Z,1509692680.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:40.098Z,1509692680.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:40.470Z,1509692680.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:40.500Z,1509692680.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:40.872Z,1509692680.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:40.948Z,1509692680.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:41.262Z,1509692681.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:41.277Z,1509692681.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:41.677Z,1509692681.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:41.703Z,1509692681.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:42.078Z,1509692682.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:42.095Z,1509692682.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:42.478Z,1509692682.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:42.493Z,1509692682.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:42.873Z,1509692682.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:42.887Z,1509692682.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:43.272Z,1509692683.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:43.287Z,1509692683.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:43.674Z,1509692683.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:43.693Z,1509692683.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:44.074Z,1509692684.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:44.094Z,1509692684.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:44.474Z,1509692684.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:44.495Z,1509692684.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:44.884Z,1509692684.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:44.899Z,1509692684.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:45.285Z,1509692685.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:45.306Z,1509692685.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:45.684Z,1509692685.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:45.772Z,1509692685.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:46.069Z,1509692686.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:46.115Z,1509692686.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:46.464Z,1509692686.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:46.479Z,1509692686.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:46.927Z,1509692686.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:46.956Z,1509692686.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:47.275Z,1509692687.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:47.330Z,1509692687.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:47.681Z,1509692687.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:47.706Z,1509692687.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:48.081Z,1509692688.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:48.135Z,1509692688.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:48.478Z,1509692688.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:48.523Z,1509692688.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:48.869Z,1509692688.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:48.909Z,1509692688.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:49.269Z,1509692689.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:49.284Z,1509692689.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:49.665Z,1509692689.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:49.680Z,1509692689.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:50.108Z,1509692690.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:50.123Z,1509692690.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:50.470Z,1509692690.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:50.486Z,1509692690.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:50.882Z,1509692690.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:50.905Z,1509692690.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:51.278Z,1509692691.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:51.309Z,1509692691.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:51.686Z,1509692691.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:51.715Z,1509692691.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:52.074Z,1509692692.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:52.105Z,1509692692.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:52.468Z,1509692692.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:52.483Z,1509692692.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:52.871Z,1509692692.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:52.888Z,1509692692.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:53.270Z,1509692693.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:53.285Z,1509692693.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:53.681Z,1509692693.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:53.712Z,1509692693.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:54.078Z,1509692694.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:54.108Z,1509692694.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:54.486Z,1509692694.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:54.509Z,1509692694.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:54.866Z,1509692694.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:54.882Z,1509692694.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:55.269Z,1509692695.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:55.285Z,1509692695.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:55.668Z,1509692695.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:55.683Z,1509692695.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:56.063Z,1509692696.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:56.097Z,1509692696.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:56.467Z,1509692696.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:56.494Z,1509692696.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:56.885Z,1509692696.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:56.907Z,1509692696.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:57.289Z,1509692697.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:57.310Z,1509692697.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:57.686Z,1509692697.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:57.701Z,1509692697.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:58.065Z,1509692698.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:58.089Z,1509692698.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:58.464Z,1509692698.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:58.479Z,1509692698.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:58.869Z,1509692698.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:58.901Z,1509692698.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:59.270Z,1509692699.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:59.285Z,1509692699.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:04:59.678Z,1509692699.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:04:59.708Z,1509692699.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:00.090Z,1509692700.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:00.113Z,1509692700.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:00.486Z,1509692700.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:00.543Z,1509692700.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:00.871Z,1509692700.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:00.932Z,1509692700.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:01.276Z,1509692701.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:01.291Z,1509692701.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:01.672Z,1509692701.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:01.717Z,1509692701.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:02.071Z,1509692702.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:02.086Z,1509692702.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:02.470Z,1509692702.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:02.523Z,1509692702.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:02.884Z,1509692702.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:02.938Z,1509692702.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:03.284Z,1509692703.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:03.299Z,1509692703.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:03.686Z,1509692703.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:03.718Z,1509692703.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:04.093Z,1509692704.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:04.122Z,1509692704.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:04.473Z,1509692704.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:04.510Z,1509692704.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:04.876Z,1509692704.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:04.891Z,1509692704.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:05.273Z,1509692705.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:05.295Z,1509692705.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:05.677Z,1509692705.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:05.698Z,1509692705.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:08.970Z,1509692708.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:09.034Z,1509692709.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:09.180Z,1509692709.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:09.222Z,1509692709.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:09.566Z,1509692709.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:09.583Z,1509692709.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:09.962Z,1509692709.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:09.981Z,1509692709.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:10.363Z,1509692710.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:10.379Z,1509692710.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:10.777Z,1509692710.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:10.818Z,1509692710.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:11.175Z,1509692711.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:11.195Z,1509692711.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:11.575Z,1509692711.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:11.595Z,1509692711.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:11.961Z,1509692711.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:11.982Z,1509692711.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:12.366Z,1509692712.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:12.383Z,1509692712.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:12.767Z,1509692712.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:12.782Z,1509692712.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:13.166Z,1509692713.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:13.182Z,1509692713.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:13.576Z,1509692713.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:13.599Z,1509692713.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:13.982Z,1509692713.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:13.997Z,1509692713.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:14.376Z,1509692714.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:14.399Z,1509692714.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:14.764Z,1509692714.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:14.823Z,1509692714.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:15.164Z,1509692715.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:15.182Z,1509692715.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:15.566Z,1509692715.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:15.581Z,1509692715.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:15.971Z,1509692715.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:16.030Z,1509692716.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:16.364Z,1509692716.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:16.380Z,1509692716.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:16.668Z,1509692716.668 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:05:16.668Z,1509692716.668 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T07:05:16.668Z,1509692716.668 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:05:16.776Z,1509692716.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:16.835Z,1509692716.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T07:05:16.836Z,1509692716.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:16.921Z,1509692716.921 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:05:17.072Z,1509692717.072 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:05:17.179Z,1509692717.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:17.220Z,1509692717.220 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:05:17.247Z,1509692717.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T07:05:17.249Z,1509692717.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:17.577Z,1509692717.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:17.598Z,1509692717.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:05:17.599Z,1509692717.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:17.964Z,1509692717.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:17.987Z,1509692717.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:05:17.988Z,1509692717.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:18.368Z,1509692718.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:18.384Z,1509692718.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:05:18.385Z,1509692718.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:18.385Z,1509692718.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 137
2017-11-03T07:05:18.385Z,1509692718.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:05:18.387Z,1509692718.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:18.387Z,1509692718.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 137
2017-11-03T07:05:18.387Z,1509692718.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:05:18.390Z,1509692718.390 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:18.390Z,1509692718.390 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 137
2017-11-03T07:05:18.390Z,1509692718.390 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:05:18.465Z,1509692718.465 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:05:18.465Z,1509692718.465 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:05:18.465Z,1509692718.465 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:05:18.466Z,1509692718.466 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:05:18.466Z,1509692718.466 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T07:05:18.755Z,1509692718.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:18.837Z,1509692718.837 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:05:18.839Z,1509692718.839 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:05:18.840Z,1509692718.840 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:05:18.840Z,1509692718.840 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:05:18.862Z,1509692718.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:05:18.862Z,1509692718.862 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 137
2017-11-03T07:05:18.862Z,1509692718.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:05:18.862Z,1509692718.862 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 137
2017-11-03T07:05:18.863Z,1509692718.863 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:05:18.863Z,1509692718.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 137
2017-11-03T07:05:19.155Z,1509692719.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:19.195Z,1509692719.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:05:19.196Z,1509692719.196 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:05:19.196Z,1509692719.196 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:05:19.196Z,1509692719.196 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:05:19.197Z,1509692719.197 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:05:19.197Z,1509692719.197 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:05:19.198Z,1509692719.198 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:05:19.198Z,1509692719.198 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:05:19.198Z,1509692719.198 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:05:19.577Z,1509692719.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:19.597Z,1509692719.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:05:19.598Z,1509692719.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:19.970Z,1509692719.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:19.993Z,1509692719.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:05:19.994Z,1509692719.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:20.370Z,1509692720.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:20.394Z,1509692720.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:05:20.395Z,1509692720.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:20.756Z,1509692720.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:20.772Z,1509692720.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:05:20.789Z,1509692720.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:21.156Z,1509692721.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:21.171Z,1509692721.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:05:21.172Z,1509692721.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:21.556Z,1509692721.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:21.571Z,1509692721.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:05:21.572Z,1509692721.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:21.957Z,1509692721.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:21.972Z,1509692721.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:05:21.974Z,1509692721.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:22.358Z,1509692722.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:22.372Z,1509692722.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:05:22.373Z,1509692722.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:22.769Z,1509692722.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:22.802Z,1509692722.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:05:22.803Z,1509692722.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:22.969Z,1509692722.969 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:05:23.033Z,1509692723.033 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:05:23.034Z,1509692723.034 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:05:23.034Z,1509692723.034 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:05:23.035Z,1509692723.035 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:05:23.172Z,1509692723.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:23.203Z,1509692723.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:05:23.204Z,1509692723.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:23.588Z,1509692723.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:23.605Z,1509692723.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:23.962Z,1509692723.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:24.002Z,1509692724.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:24.360Z,1509692724.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:24.375Z,1509692724.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:24.763Z,1509692724.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:24.779Z,1509692724.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:25.160Z,1509692725.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:25.176Z,1509692725.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:25.574Z,1509692725.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:25.604Z,1509692725.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:25.973Z,1509692725.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:26.005Z,1509692726.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:26.374Z,1509692726.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:26.405Z,1509692726.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:26.814Z,1509692726.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:26.874Z,1509692726.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:27.160Z,1509692727.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:27.175Z,1509692727.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:27.560Z,1509692727.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:27.575Z,1509692727.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:27.963Z,1509692727.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:27.979Z,1509692727.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:28.359Z,1509692728.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:28.427Z,1509692728.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:28.812Z,1509692728.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:28.861Z,1509692728.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:29.175Z,1509692729.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:29.254Z,1509692729.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:29.576Z,1509692729.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:29.590Z,1509692729.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:29.956Z,1509692729.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:30.020Z,1509692730.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:30.359Z,1509692730.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:30.379Z,1509692730.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:30.821Z,1509692730.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:30.873Z,1509692730.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:31.166Z,1509692731.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:31.219Z,1509692731.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:31.568Z,1509692731.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:31.583Z,1509692731.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:31.973Z,1509692731.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:31.988Z,1509692731.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:32.372Z,1509692732.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:32.395Z,1509692732.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:32.780Z,1509692732.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:32.834Z,1509692732.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:33.164Z,1509692733.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:33.179Z,1509692733.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:33.565Z,1509692733.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:33.580Z,1509692733.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:33.961Z,1509692733.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:33.980Z,1509692733.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:34.366Z,1509692734.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:34.380Z,1509692734.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:34.777Z,1509692734.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:34.792Z,1509692734.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:35.182Z,1509692735.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:35.197Z,1509692735.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:35.569Z,1509692735.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:35.598Z,1509692735.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:35.957Z,1509692735.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:35.995Z,1509692735.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:36.353Z,1509692736.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:36.368Z,1509692736.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:36.752Z,1509692736.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:36.767Z,1509692736.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:37.167Z,1509692737.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:37.193Z,1509692737.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:37.566Z,1509692737.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:37.591Z,1509692737.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:37.964Z,1509692737.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:37.997Z,1509692737.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:38.369Z,1509692738.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:38.404Z,1509692738.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:38.759Z,1509692738.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:38.794Z,1509692738.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:39.156Z,1509692739.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:39.171Z,1509692739.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:39.556Z,1509692739.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:39.594Z,1509692739.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:39.960Z,1509692739.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:39.991Z,1509692739.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:40.356Z,1509692740.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:40.374Z,1509692740.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:40.769Z,1509692740.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:40.796Z,1509692740.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:41.170Z,1509692741.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:41.195Z,1509692741.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:41.583Z,1509692741.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:41.598Z,1509692741.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:41.956Z,1509692741.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:42.018Z,1509692742.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:42.356Z,1509692742.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:42.371Z,1509692742.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:42.826Z,1509692742.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:42.893Z,1509692742.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:43.160Z,1509692743.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:43.182Z,1509692743.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:43.573Z,1509692743.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:43.609Z,1509692743.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:43.969Z,1509692743.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:44.015Z,1509692744.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:44.377Z,1509692744.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:44.392Z,1509692744.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:44.813Z,1509692744.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:44.871Z,1509692744.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:45.163Z,1509692745.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:45.187Z,1509692745.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:45.565Z,1509692745.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:45.615Z,1509692745.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:45.962Z,1509692745.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:45.977Z,1509692745.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:46.365Z,1509692746.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:46.380Z,1509692746.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:46.808Z,1509692746.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:46.861Z,1509692746.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:47.182Z,1509692747.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:47.197Z,1509692747.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:47.577Z,1509692747.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:47.593Z,1509692747.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:47.959Z,1509692747.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:47.985Z,1509692747.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:48.352Z,1509692748.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:48.383Z,1509692748.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:48.759Z,1509692748.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:48.790Z,1509692748.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:49.155Z,1509692749.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:49.195Z,1509692749.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:49.569Z,1509692749.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:49.596Z,1509692749.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:49.969Z,1509692749.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:49.997Z,1509692749.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:50.369Z,1509692750.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:50.396Z,1509692750.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:50.756Z,1509692750.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:50.771Z,1509692750.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:51.154Z,1509692751.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:51.175Z,1509692751.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:51.556Z,1509692751.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:51.595Z,1509692751.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:51.956Z,1509692751.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:51.972Z,1509692751.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:52.362Z,1509692752.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:52.402Z,1509692752.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:52.769Z,1509692752.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:52.801Z,1509692752.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:53.177Z,1509692753.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:53.207Z,1509692753.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:53.573Z,1509692753.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:53.596Z,1509692753.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:53.957Z,1509692753.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:53.972Z,1509692753.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:54.355Z,1509692754.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:54.375Z,1509692754.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:54.757Z,1509692754.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:54.773Z,1509692754.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:55.163Z,1509692755.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:55.179Z,1509692755.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:55.578Z,1509692755.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:55.607Z,1509692755.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:55.973Z,1509692755.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:56.052Z,1509692756.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:56.403Z,1509692756.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:56.432Z,1509692756.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:56.834Z,1509692756.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:56.925Z,1509692756.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:57.162Z,1509692757.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:57.191Z,1509692757.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:57.566Z,1509692757.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:57.653Z,1509692757.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:57.968Z,1509692757.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:57.996Z,1509692757.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:58.372Z,1509692758.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:58.441Z,1509692758.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:58.809Z,1509692758.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:58.849Z,1509692758.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:59.171Z,1509692759.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:59.255Z,1509692759.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:59.568Z,1509692759.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:05:59.611Z,1509692759.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:05:59.961Z,1509692759.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:00.014Z,1509692760.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:00.363Z,1509692760.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:00.395Z,1509692760.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:00.846Z,1509692760.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:00.876Z,1509692760.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:01.157Z,1509692761.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:01.202Z,1509692761.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:01.589Z,1509692761.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:01.613Z,1509692761.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:01.979Z,1509692761.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:02.007Z,1509692762.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:02.375Z,1509692762.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:02.422Z,1509692762.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:02.761Z,1509692762.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:02.830Z,1509692762.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:03.165Z,1509692763.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:03.205Z,1509692763.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:03.590Z,1509692763.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:03.631Z,1509692763.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:03.963Z,1509692763.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:04.051Z,1509692764.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:04.366Z,1509692764.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:04.405Z,1509692764.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:04.854Z,1509692764.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:05.215Z,1509692765.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:05.615Z,1509692765.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:05.965Z,1509692765.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:06.026Z,1509692766.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:12.315Z,1509692772.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:12.407Z,1509692772.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:12.556Z,1509692772.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:12.600Z,1509692772.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:12.974Z,1509692772.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:13.027Z,1509692773.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:13.391Z,1509692773.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:13.458Z,1509692773.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:13.802Z,1509692773.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:13.863Z,1509692773.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:14.155Z,1509692774.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:14.206Z,1509692774.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:14.556Z,1509692774.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:14.571Z,1509692774.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:14.968Z,1509692774.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:06:15.003Z,1509692775.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:15.371Z,1509692775.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:15.806Z,1509692775.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:16.181Z,1509692776.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:16.582Z,1509692776.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:16.973Z,1509692776.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:17.379Z,1509692777.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:17.776Z,1509692777.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:18.179Z,1509692778.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:18.588Z,1509692778.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:18.980Z,1509692778.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:19.382Z,1509692779.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:19.775Z,1509692779.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:20.177Z,1509692780.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:20.583Z,1509692780.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:20.977Z,1509692780.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:21.399Z,1509692781.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:21.789Z,1509692781.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:22.195Z,1509692782.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:22.589Z,1509692782.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:22.983Z,1509692782.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:23.424Z,1509692783.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:23.787Z,1509692783.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:24.183Z,1509692784.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:24.588Z,1509692784.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:25.035Z,1509692785.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:25.395Z,1509692785.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:25.783Z,1509692785.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:26.186Z,1509692786.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:26.583Z,1509692786.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:26.986Z,1509692786.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:27.380Z,1509692787.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:27.788Z,1509692787.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:28.191Z,1509692788.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:28.587Z,1509692788.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:28.991Z,1509692788.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:29.371Z,1509692789.371 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:06:29.371Z,1509692789.371 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:06:29.372Z,1509692789.372 [BPC1](ERROR): Communications Fault
2017-11-03T07:06:29.387Z,1509692789.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:29.465Z,1509692789.465 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:06:29.779Z,1509692789.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:30.177Z,1509692790.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:30.588Z,1509692790.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:30.672Z,1509692790.672 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:06:30.673Z,1509692790.673 [BPC1] No Fault, FailCount= 1
2017-11-03T07:06:31.055Z,1509692791.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:31.384Z,1509692791.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:31.779Z,1509692791.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:32.180Z,1509692792.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:32.579Z,1509692792.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:32.981Z,1509692792.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:33.386Z,1509692793.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:33.790Z,1509692793.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:34.189Z,1509692794.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:34.595Z,1509692794.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:34.983Z,1509692794.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:35.405Z,1509692795.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:35.804Z,1509692795.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:36.183Z,1509692796.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:36.588Z,1509692796.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:36.988Z,1509692796.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:37.406Z,1509692797.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:37.780Z,1509692797.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:38.181Z,1509692798.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:38.583Z,1509692798.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:38.986Z,1509692798.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:39.382Z,1509692799.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:39.796Z,1509692799.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:40.188Z,1509692800.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:40.585Z,1509692800.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:40.992Z,1509692800.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:41.368Z,1509692801.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:41.771Z,1509692801.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:42.171Z,1509692802.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:42.587Z,1509692802.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:42.999Z,1509692802.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:43.381Z,1509692803.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:43.768Z,1509692803.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:44.196Z,1509692804.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:44.567Z,1509692804.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:44.971Z,1509692804.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:45.367Z,1509692805.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:45.781Z,1509692805.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:46.180Z,1509692806.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:46.606Z,1509692806.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:46.975Z,1509692806.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:47.367Z,1509692807.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:47.798Z,1509692807.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:48.175Z,1509692808.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:48.607Z,1509692808.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:49.010Z,1509692809.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:49.414Z,1509692809.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:49.775Z,1509692809.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:50.195Z,1509692810.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:50.591Z,1509692810.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:50.982Z,1509692810.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:51.378Z,1509692811.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:51.787Z,1509692811.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:52.181Z,1509692812.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:52.579Z,1509692812.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:52.974Z,1509692812.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:53.375Z,1509692813.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:53.777Z,1509692813.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:54.177Z,1509692814.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:54.580Z,1509692814.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:55.011Z,1509692815.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:55.381Z,1509692815.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:55.776Z,1509692815.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:56.183Z,1509692816.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:56.583Z,1509692816.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:56.975Z,1509692816.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:57.387Z,1509692817.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:57.789Z,1509692817.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:58.191Z,1509692818.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:58.594Z,1509692818.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:58.979Z,1509692818.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:59.442Z,1509692819.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:06:59.779Z,1509692819.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:00.183Z,1509692820.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:00.626Z,1509692820.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:01.061Z,1509692821.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:01.430Z,1509692821.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:01.807Z,1509692821.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:02.166Z,1509692822.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:02.567Z,1509692822.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:02.970Z,1509692822.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:03.407Z,1509692823.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:03.790Z,1509692823.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:04.190Z,1509692824.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:04.592Z,1509692824.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:04.967Z,1509692824.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:05.411Z,1509692825.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:05.771Z,1509692825.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:06.175Z,1509692826.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:09.502Z,1509692829.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:09.670Z,1509692829.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:10.068Z,1509692830.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:10.457Z,1509692830.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:10.892Z,1509692830.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:11.275Z,1509692831.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:11.661Z,1509692831.661 [PNI_TCM](ERROR): CRC does not match. Expected:0x63113 got:0x19571
2017-11-03T07:07:11.696Z,1509692831.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:12.064Z,1509692832.064 [BPC1](ERROR): Failed to parse message.
2017-11-03T07:07:12.064Z,1509692832.064 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T07:07:12.064Z,1509692832.064 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:07:12.064Z,1509692832.064 [BPC1](ERROR): Data Fault
2017-11-03T07:07:12.072Z,1509692832.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:12.177Z,1509692832.177 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:07:12.470Z,1509692832.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:12.938Z,1509692832.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:13.254Z,1509692833.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:13.357Z,1509692833.357 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:07:13.357Z,1509692833.357 [BPC1] No Fault, FailCount= 1
2017-11-03T07:07:13.723Z,1509692833.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:14.078Z,1509692834.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:14.479Z,1509692834.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:14.859Z,1509692834.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:15.277Z,1509692835.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:15.687Z,1509692835.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:16.074Z,1509692836.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:16.445Z,1509692836.445 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T07:07:16.482Z,1509692836.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:16.850Z,1509692836.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:17.270Z,1509692837.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:17.658Z,1509692837.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:18.080Z,1509692838.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:18.458Z,1509692838.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:18.861Z,1509692838.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:18.984Z,1509692838.984 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:07:18.984Z,1509692838.984 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T07:07:18.984Z,1509692838.984 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:07:19.257Z,1509692839.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:07:19.258Z,1509692839.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:19.389Z,1509692839.389 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:07:19.418Z,1509692839.418 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:07:19.498Z,1509692839.498 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:07:19.661Z,1509692839.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:07:19.662Z,1509692839.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:20.066Z,1509692840.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:07:20.067Z,1509692840.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:20.460Z,1509692840.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:07:20.461Z,1509692840.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:20.868Z,1509692840.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:07:20.869Z,1509692840.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:20.961Z,1509692840.961 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:07:20.961Z,1509692840.961 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T07:07:21.112Z,1509692841.112 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:07:21.113Z,1509692841.113 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:07:21.113Z,1509692841.113 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:07:21.113Z,1509692841.113 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:07:21.252Z,1509692841.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:07:21.267Z,1509692841.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:07:21.268Z,1509692841.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:21.651Z,1509692841.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:07:21.674Z,1509692841.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:07:21.675Z,1509692841.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:22.028Z,1509692842.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:07:22.066Z,1509692842.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:07:22.067Z,1509692842.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:22.464Z,1509692842.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:07:22.465Z,1509692842.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:22.858Z,1509692842.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:07:22.859Z,1509692842.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:23.260Z,1509692843.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:07:23.261Z,1509692843.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:23.669Z,1509692843.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:07:23.670Z,1509692843.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:24.070Z,1509692844.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:07:24.071Z,1509692844.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:24.470Z,1509692844.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:07:24.471Z,1509692844.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:24.886Z,1509692844.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:07:24.887Z,1509692844.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:25.317Z,1509692845.317 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:07:25.335Z,1509692845.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T07:07:25.345Z,1509692845.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:25.440Z,1509692845.440 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:07:25.441Z,1509692845.441 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:07:25.441Z,1509692845.441 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:07:25.442Z,1509692845.442 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:07:25.676Z,1509692845.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:07:25.677Z,1509692845.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:26.095Z,1509692846.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:26.447Z,1509692846.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:26.903Z,1509692846.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:27.300Z,1509692847.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:27.676Z,1509692847.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:28.049Z,1509692848.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:28.472Z,1509692848.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:28.852Z,1509692848.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:29.247Z,1509692849.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:29.674Z,1509692849.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:30.071Z,1509692850.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:30.478Z,1509692850.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:30.874Z,1509692850.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:31.241Z,1509692851.241 [PNI_TCM](ERROR): CRC does not match. Expected:0x4464 got:0x13848
2017-11-03T07:07:31.275Z,1509692851.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:31.674Z,1509692851.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:32.076Z,1509692852.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:32.479Z,1509692852.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:32.868Z,1509692852.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:33.278Z,1509692853.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:33.671Z,1509692853.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:34.051Z,1509692854.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:34.451Z,1509692854.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:34.875Z,1509692854.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:35.272Z,1509692855.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:35.671Z,1509692855.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:36.075Z,1509692856.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:36.471Z,1509692856.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:36.870Z,1509692856.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:37.251Z,1509692857.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:37.671Z,1509692857.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:38.093Z,1509692858.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:38.452Z,1509692858.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:38.919Z,1509692858.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:39.275Z,1509692859.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:39.714Z,1509692859.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:40.090Z,1509692860.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:40.454Z,1509692860.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:40.874Z,1509692860.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:41.278Z,1509692861.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:41.675Z,1509692861.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:42.079Z,1509692862.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:42.475Z,1509692862.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:42.891Z,1509692862.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:43.274Z,1509692863.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:43.676Z,1509692863.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:44.051Z,1509692864.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:44.478Z,1509692864.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:44.872Z,1509692864.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:45.278Z,1509692865.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:45.674Z,1509692865.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:46.078Z,1509692866.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:46.450Z,1509692866.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:46.854Z,1509692866.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:47.255Z,1509692867.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:47.670Z,1509692867.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:48.075Z,1509692868.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:48.478Z,1509692868.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:48.858Z,1509692868.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:49.275Z,1509692869.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:49.669Z,1509692869.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:50.073Z,1509692870.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:50.447Z,1509692870.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:50.911Z,1509692870.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:51.283Z,1509692871.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:51.672Z,1509692871.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:52.091Z,1509692872.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:52.478Z,1509692872.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:52.886Z,1509692872.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:53.251Z,1509692873.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:53.698Z,1509692873.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:54.079Z,1509692874.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:54.517Z,1509692874.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:54.922Z,1509692874.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:55.245Z,1509692875.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:55.678Z,1509692875.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:56.052Z,1509692876.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:56.446Z,1509692876.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:56.933Z,1509692876.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:57.278Z,1509692877.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:57.671Z,1509692877.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:58.051Z,1509692878.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:58.451Z,1509692878.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:58.870Z,1509692878.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:59.255Z,1509692879.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:07:59.675Z,1509692879.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:00.072Z,1509692880.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:00.472Z,1509692880.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:00.856Z,1509692880.856 [PNI_TCM](ERROR): CRC does not match. Expected:0x26954 got:0x6210
2017-11-03T07:08:00.890Z,1509692880.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:01.256Z,1509692881.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:01.660Z,1509692881.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:02.071Z,1509692882.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:02.458Z,1509692882.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:02.867Z,1509692882.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:03.270Z,1509692883.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:03.682Z,1509692883.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:04.060Z,1509692884.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:04.465Z,1509692884.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:04.873Z,1509692884.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:05.271Z,1509692885.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:05.274Z,1509692885.274 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T07:08:05.274Z,1509692885.274 [Default:CheckIn:C.Wait] Stopped
2017-11-03T07:08:05.274Z,1509692885.274 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T07:08:05.274Z,1509692885.274 [Default:CheckIn:D] Running Loop=1
2017-11-03T07:08:05.715Z,1509692885.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:05.722Z,1509692885.722 [Default:CheckIn:D] Stopped
2017-11-03T07:08:05.722Z,1509692885.722 [Default:CheckIn:E] Running Loop=1
2017-11-03T07:08:06.075Z,1509692886.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:06.078Z,1509692886.078 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 412.969271 min 
2017-11-03T07:08:06.078Z,1509692886.078 [Default:CheckIn:E] Stopped
2017-11-03T07:08:06.079Z,1509692886.079 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T07:08:06.079Z,1509692886.079 [Default:CheckIn] Stopped
2017-11-03T07:08:06.079Z,1509692886.079 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T07:08:06.079Z,1509692886.079 [Default:CheckIn](INFO): Running loop #41
2017-11-03T07:08:06.079Z,1509692886.079 [Default:CheckIn] Running Loop=41
2017-11-03T07:08:06.079Z,1509692886.079 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T07:08:06.079Z,1509692886.079 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T07:08:06.468Z,1509692886.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:09.683Z,1509692889.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:09.871Z,1509692889.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:10.243Z,1509692890.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:10.648Z,1509692890.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:11.042Z,1509692891.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:11.471Z,1509692891.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:11.837Z,1509692891.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:12.271Z,1509692892.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:12.675Z,1509692892.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:13.082Z,1509692893.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:13.440Z,1509692893.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:13.830Z,1509692893.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:14.225Z,1509692894.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:14.626Z,1509692894.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:15.031Z,1509692895.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:15.459Z,1509692895.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:15.859Z,1509692895.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:16.259Z,1509692896.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:16.640Z,1509692896.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:17.026Z,1509692897.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:17.458Z,1509692897.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:17.831Z,1509692897.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:18.226Z,1509692898.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:18.659Z,1509692898.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:19.060Z,1509692899.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:19.459Z,1509692899.459 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:19.459Z,1509692899.459 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 138
2017-11-03T07:08:19.459Z,1509692899.459 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:08:19.461Z,1509692899.461 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:19.461Z,1509692899.461 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 138
2017-11-03T07:08:19.461Z,1509692899.461 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:08:19.463Z,1509692899.463 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:19.463Z,1509692899.463 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 138
2017-11-03T07:08:19.463Z,1509692899.463 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:08:19.537Z,1509692899.537 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:08:19.537Z,1509692899.537 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:08:19.537Z,1509692899.537 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:08:19.944Z,1509692899.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:08:19.945Z,1509692899.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 138
2017-11-03T07:08:19.945Z,1509692899.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:08:19.945Z,1509692899.945 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 138
2017-11-03T07:08:19.946Z,1509692899.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:08:19.946Z,1509692899.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 138
2017-11-03T07:08:20.232Z,1509692900.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:08:20.232Z,1509692900.232 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:08:20.233Z,1509692900.233 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:08:20.233Z,1509692900.233 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:08:20.233Z,1509692900.233 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:08:20.234Z,1509692900.234 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:08:20.234Z,1509692900.234 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:08:20.234Z,1509692900.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:08:20.235Z,1509692900.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:08:20.632Z,1509692900.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:21.032Z,1509692901.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:21.436Z,1509692901.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:21.864Z,1509692901.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:22.240Z,1509692902.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:22.665Z,1509692902.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:23.035Z,1509692903.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:23.475Z,1509692903.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:23.837Z,1509692903.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:24.243Z,1509692904.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:24.694Z,1509692904.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:25.047Z,1509692905.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:25.447Z,1509692905.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:25.882Z,1509692905.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:26.239Z,1509692906.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:26.667Z,1509692906.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:27.134Z,1509692907.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:27.440Z,1509692907.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:27.848Z,1509692907.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:28.251Z,1509692908.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:28.655Z,1509692908.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:29.043Z,1509692909.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:29.451Z,1509692909.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:29.841Z,1509692909.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:30.243Z,1509692910.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:30.647Z,1509692910.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:31.051Z,1509692911.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:31.444Z,1509692911.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:31.843Z,1509692911.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:32.237Z,1509692912.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:32.647Z,1509692912.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:33.046Z,1509692913.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:33.441Z,1509692913.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:33.847Z,1509692913.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:34.251Z,1509692914.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:34.654Z,1509692914.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:35.047Z,1509692915.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:35.447Z,1509692915.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:35.840Z,1509692915.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:36.239Z,1509692916.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:36.655Z,1509692916.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:37.059Z,1509692917.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:37.448Z,1509692917.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:37.867Z,1509692917.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:38.241Z,1509692918.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:38.643Z,1509692918.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:39.067Z,1509692919.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:39.442Z,1509692919.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:39.848Z,1509692919.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:40.286Z,1509692920.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:40.648Z,1509692920.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:41.122Z,1509692921.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:41.459Z,1509692921.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:41.866Z,1509692921.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:42.245Z,1509692922.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:42.649Z,1509692922.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:43.049Z,1509692923.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:43.458Z,1509692923.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:43.839Z,1509692923.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:44.228Z,1509692924.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:44.655Z,1509692924.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:45.031Z,1509692925.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:45.454Z,1509692925.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:45.851Z,1509692925.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:46.250Z,1509692926.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:46.659Z,1509692926.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:47.031Z,1509692927.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:47.427Z,1509692927.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:47.854Z,1509692927.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:48.227Z,1509692928.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:48.652Z,1509692928.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:49.053Z,1509692929.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:49.451Z,1509692929.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:49.827Z,1509692929.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:50.250Z,1509692930.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:50.626Z,1509692930.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:51.046Z,1509692931.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:51.431Z,1509692931.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:51.855Z,1509692931.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:52.283Z,1509692932.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:52.655Z,1509692932.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:53.030Z,1509692933.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:53.426Z,1509692933.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:53.919Z,1509692933.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:54.223Z,1509692934.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:54.654Z,1509692934.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:55.115Z,1509692935.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:55.440Z,1509692935.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:55.867Z,1509692935.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:56.263Z,1509692936.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:56.635Z,1509692936.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:57.035Z,1509692937.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:57.438Z,1509692937.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:57.864Z,1509692937.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:58.244Z,1509692938.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:58.644Z,1509692938.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:59.034Z,1509692939.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:59.465Z,1509692939.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:08:59.835Z,1509692939.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:00.234Z,1509692940.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:00.640Z,1509692940.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:01.061Z,1509692941.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:01.440Z,1509692941.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:01.839Z,1509692941.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:02.271Z,1509692942.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:02.634Z,1509692942.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:03.033Z,1509692943.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:03.439Z,1509692943.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:03.837Z,1509692943.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:04.240Z,1509692944.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:04.664Z,1509692944.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:05.033Z,1509692945.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:05.434Z,1509692945.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:05.845Z,1509692945.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:06.234Z,1509692946.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:06.664Z,1509692946.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:09.883Z,1509692949.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:10.067Z,1509692950.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:10.430Z,1509692950.430 [PNI_TCM](ERROR): CRC does not match. Expected:0x13393 got:0x17074
2017-11-03T07:09:10.471Z,1509692950.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:10.887Z,1509692950.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:11.234Z,1509692951.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:11.687Z,1509692951.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:12.091Z,1509692952.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:12.466Z,1509692952.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:12.840Z,1509692952.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:13.248Z,1509692953.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:13.653Z,1509692953.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:14.059Z,1509692954.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:14.425Z,1509692954.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:14.868Z,1509692954.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:15.253Z,1509692955.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:15.664Z,1509692955.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:16.030Z,1509692956.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:16.456Z,1509692956.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:16.867Z,1509692956.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:17.251Z,1509692957.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:17.657Z,1509692957.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:18.066Z,1509692958.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:18.454Z,1509692958.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:18.867Z,1509692958.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x9452 got:0x47643
2017-11-03T07:09:18.902Z,1509692958.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:19.262Z,1509692959.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:19.657Z,1509692959.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:20.036Z,1509692960.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:20.460Z,1509692960.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:20.911Z,1509692960.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:21.251Z,1509692961.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:21.655Z,1509692961.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:21.696Z,1509692961.696 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:09:21.697Z,1509692961.697 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T07:09:21.697Z,1509692961.697 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:09:21.757Z,1509692961.757 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:09:22.059Z,1509692962.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:09:22.060Z,1509692962.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:22.101Z,1509692962.101 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:09:22.222Z,1509692962.222 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:09:22.441Z,1509692962.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:09:22.442Z,1509692962.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:22.841Z,1509692962.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:09:22.842Z,1509692962.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:23.240Z,1509692963.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:09:23.241Z,1509692963.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:23.647Z,1509692963.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:09:23.648Z,1509692963.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:23.733Z,1509692963.733 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:09:23.733Z,1509692963.733 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T07:09:23.836Z,1509692963.836 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:09:23.837Z,1509692963.837 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:09:23.837Z,1509692963.837 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:09:23.837Z,1509692963.837 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:09:24.101Z,1509692964.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:09:24.102Z,1509692964.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:24.498Z,1509692964.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:09:24.499Z,1509692964.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:24.847Z,1509692964.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:09:24.848Z,1509692964.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:25.270Z,1509692965.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:09:25.271Z,1509692965.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:25.639Z,1509692965.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:09:25.641Z,1509692965.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:26.070Z,1509692966.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:09:26.071Z,1509692966.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:26.482Z,1509692966.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:09:26.483Z,1509692966.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:26.847Z,1509692966.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:09:26.848Z,1509692966.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:27.255Z,1509692967.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:09:27.256Z,1509692967.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:27.651Z,1509692967.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:09:27.652Z,1509692967.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:27.955Z,1509692967.955 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:09:28.062Z,1509692968.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:09:28.064Z,1509692968.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:28.103Z,1509692968.103 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:09:28.104Z,1509692968.104 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:09:28.105Z,1509692968.105 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:09:28.106Z,1509692968.106 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:09:28.466Z,1509692968.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:09:28.467Z,1509692968.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:28.833Z,1509692968.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:29.227Z,1509692969.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:29.665Z,1509692969.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:30.075Z,1509692970.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:30.443Z,1509692970.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:30.837Z,1509692970.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:31.240Z,1509692971.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:31.635Z,1509692971.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:32.036Z,1509692972.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:32.447Z,1509692972.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:32.845Z,1509692972.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:33.266Z,1509692973.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:33.651Z,1509692973.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:34.041Z,1509692974.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:34.441Z,1509692974.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:34.844Z,1509692974.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:35.239Z,1509692975.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:35.652Z,1509692975.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:36.055Z,1509692976.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:36.472Z,1509692976.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:36.835Z,1509692976.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:37.244Z,1509692977.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:37.639Z,1509692977.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:38.102Z,1509692978.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:38.490Z,1509692978.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:38.851Z,1509692978.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:39.287Z,1509692979.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:39.677Z,1509692979.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:40.055Z,1509692980.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:40.459Z,1509692980.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:40.853Z,1509692980.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:41.245Z,1509692981.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:41.595Z,1509692981.595 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T07:09:41.595Z,1509692981.595 [NAL9602] Data Fault, FailCount= 3
2017-11-03T07:09:41.595Z,1509692981.595 [NAL9602](ERROR): Data Fault
2017-11-03T07:09:41.651Z,1509692981.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:41.747Z,1509692981.747 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T07:09:42.006Z,1509692982.006 [NAL9602](INFO): Powering down
2017-11-03T07:09:42.057Z,1509692982.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:42.446Z,1509692982.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:42.846Z,1509692982.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:42.944Z,1509692982.944 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T07:09:42.944Z,1509692982.944 [NAL9602] No Fault, FailCount= 3
2017-11-03T07:09:43.226Z,1509692983.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:43.626Z,1509692983.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:44.050Z,1509692984.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:44.426Z,1509692984.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:44.826Z,1509692984.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:45.225Z,1509692985.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:45.631Z,1509692985.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:46.032Z,1509692986.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:46.431Z,1509692986.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:46.825Z,1509692986.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:47.231Z,1509692987.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:47.630Z,1509692987.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:48.105Z,1509692988.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:48.454Z,1509692988.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:48.850Z,1509692988.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:49.224Z,1509692989.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:49.654Z,1509692989.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:50.027Z,1509692990.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:50.449Z,1509692990.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:50.851Z,1509692990.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:51.257Z,1509692991.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:51.628Z,1509692991.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:52.094Z,1509692992.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:52.460Z,1509692992.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:52.827Z,1509692992.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:53.266Z,1509692993.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:53.656Z,1509692993.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:54.061Z,1509692994.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:54.466Z,1509692994.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:54.854Z,1509692994.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:55.233Z,1509692995.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:55.631Z,1509692995.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:56.030Z,1509692996.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:56.424Z,1509692996.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:56.831Z,1509692996.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:57.224Z,1509692997.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:57.624Z,1509692997.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:58.056Z,1509692998.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:58.433Z,1509692998.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:58.824Z,1509692998.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:59.231Z,1509692999.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:09:59.625Z,1509692999.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:00.035Z,1509693000.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:00.431Z,1509693000.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:00.834Z,1509693000.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:01.224Z,1509693001.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:01.633Z,1509693001.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:02.116Z,1509693002.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:02.462Z,1509693002.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:02.854Z,1509693002.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:03.234Z,1509693003.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:03.633Z,1509693003.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:04.035Z,1509693004.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:04.454Z,1509693004.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:04.854Z,1509693004.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:05.235Z,1509693005.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:05.631Z,1509693005.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:06.057Z,1509693006.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:06.479Z,1509693006.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:06.868Z,1509693006.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:10.115Z,1509693010.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:10.287Z,1509693010.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:10.706Z,1509693010.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:11.073Z,1509693011.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:11.506Z,1509693011.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:11.881Z,1509693011.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:12.224Z,1509693012.224 [NAL9602](INFO): Powering up NAL9602
2017-11-03T07:10:12.303Z,1509693012.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:12.663Z,1509693012.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:13.069Z,1509693013.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:13.465Z,1509693013.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:13.917Z,1509693013.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:14.266Z,1509693014.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:14.668Z,1509693014.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:15.068Z,1509693015.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:15.468Z,1509693015.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:15.868Z,1509693015.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:16.265Z,1509693016.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:16.667Z,1509693016.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:17.063Z,1509693017.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:17.466Z,1509693017.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:17.871Z,1509693017.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:18.268Z,1509693018.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:18.672Z,1509693018.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:19.075Z,1509693019.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:19.470Z,1509693019.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:19.875Z,1509693019.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:20.291Z,1509693020.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:20.665Z,1509693020.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:21.059Z,1509693021.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:21.462Z,1509693021.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:21.865Z,1509693021.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:22.267Z,1509693022.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:22.686Z,1509693022.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:23.034Z,1509693023.034 [NAL9602](INFO): NAL9602 initialized
2017-11-03T07:10:23.091Z,1509693023.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:23.458Z,1509693023.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:23.915Z,1509693023.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:24.290Z,1509693024.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:24.715Z,1509693024.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:25.063Z,1509693025.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:25.463Z,1509693025.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:25.935Z,1509693025.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:26.263Z,1509693026.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:26.695Z,1509693026.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:27.111Z,1509693027.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:27.492Z,1509693027.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:27.917Z,1509693027.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:28.262Z,1509693028.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:28.664Z,1509693028.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:29.061Z,1509693029.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:29.471Z,1509693029.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:29.892Z,1509693029.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:30.268Z,1509693030.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:30.690Z,1509693030.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:31.063Z,1509693031.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:31.467Z,1509693031.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:31.871Z,1509693031.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:32.271Z,1509693032.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:32.655Z,1509693032.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:33.080Z,1509693033.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:33.491Z,1509693033.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:33.880Z,1509693033.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:34.318Z,1509693034.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:34.675Z,1509693034.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:35.057Z,1509693035.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:35.480Z,1509693035.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:35.884Z,1509693035.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:36.284Z,1509693036.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:36.691Z,1509693036.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:37.079Z,1509693037.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:37.456Z,1509693037.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:37.890Z,1509693037.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:38.261Z,1509693038.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:38.661Z,1509693038.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:39.107Z,1509693039.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:39.506Z,1509693039.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:39.903Z,1509693039.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:40.291Z,1509693040.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:40.685Z,1509693040.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:41.103Z,1509693041.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:41.499Z,1509693041.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:41.935Z,1509693041.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:42.284Z,1509693042.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:42.671Z,1509693042.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:43.067Z,1509693043.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:43.466Z,1509693043.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:43.866Z,1509693043.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:44.294Z,1509693044.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:44.663Z,1509693044.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:45.069Z,1509693045.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:45.491Z,1509693045.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:45.889Z,1509693045.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:46.258Z,1509693046.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:46.670Z,1509693046.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:47.067Z,1509693047.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:47.463Z,1509693047.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:47.880Z,1509693047.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:48.336Z,1509693048.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:48.679Z,1509693048.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:49.068Z,1509693049.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:49.479Z,1509693049.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:49.875Z,1509693049.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:50.272Z,1509693050.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:50.669Z,1509693050.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:51.080Z,1509693051.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:51.491Z,1509693051.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:51.881Z,1509693051.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:52.269Z,1509693052.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:52.679Z,1509693052.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:53.073Z,1509693053.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:53.495Z,1509693053.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:53.938Z,1509693053.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:54.281Z,1509693054.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:54.714Z,1509693054.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:55.069Z,1509693055.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:55.499Z,1509693055.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:55.959Z,1509693055.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:56.268Z,1509693056.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:56.669Z,1509693056.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:57.079Z,1509693057.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:57.480Z,1509693057.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:57.880Z,1509693057.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:58.283Z,1509693058.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:58.668Z,1509693058.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:59.072Z,1509693059.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:59.475Z,1509693059.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:10:59.880Z,1509693059.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:00.296Z,1509693060.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:00.679Z,1509693060.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:01.096Z,1509693061.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:01.487Z,1509693061.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:01.859Z,1509693061.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:02.345Z,1509693062.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:02.675Z,1509693062.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:03.082Z,1509693063.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:03.521Z,1509693063.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:03.957Z,1509693063.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:04.304Z,1509693064.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:04.679Z,1509693064.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:05.111Z,1509693065.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:05.555Z,1509693065.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:05.933Z,1509693065.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:06.291Z,1509693066.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:06.691Z,1509693066.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:07.074Z,1509693067.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:14.019Z,1509693074.019 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:11:14.019Z,1509693074.019 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:11:14.019Z,1509693074.019 [BPC1](ERROR): Communications Fault
2017-11-03T07:11:14.031Z,1509693074.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:14.149Z,1509693074.149 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:11:14.248Z,1509693074.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:14.624Z,1509693074.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:15.051Z,1509693075.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:15.176Z,1509693075.176 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:11:15.176Z,1509693075.176 [BPC1] No Fault, FailCount= 1
2017-11-03T07:11:15.514Z,1509693075.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:15.817Z,1509693075.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:16.251Z,1509693076.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:16.617Z,1509693076.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:17.031Z,1509693077.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:17.430Z,1509693077.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:17.864Z,1509693077.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:18.220Z,1509693078.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:18.608Z,1509693078.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:19.011Z,1509693079.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:19.409Z,1509693079.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:19.857Z,1509693079.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:20.223Z,1509693080.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:20.621Z,1509693080.621 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:20.621Z,1509693080.621 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 139
2017-11-03T07:11:20.621Z,1509693080.621 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:11:20.623Z,1509693080.623 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:20.623Z,1509693080.623 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 139
2017-11-03T07:11:20.623Z,1509693080.623 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:11:20.625Z,1509693080.625 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:20.625Z,1509693080.625 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 139
2017-11-03T07:11:20.625Z,1509693080.625 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:11:20.701Z,1509693080.701 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:11:20.701Z,1509693080.701 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:11:20.701Z,1509693080.701 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:11:21.100Z,1509693081.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:11:21.101Z,1509693081.101 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 139
2017-11-03T07:11:21.101Z,1509693081.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:11:21.101Z,1509693081.101 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 139
2017-11-03T07:11:21.102Z,1509693081.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:11:21.102Z,1509693081.102 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 139
2017-11-03T07:11:21.404Z,1509693081.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:11:21.420Z,1509693081.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:11:21.421Z,1509693081.421 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:11:21.421Z,1509693081.421 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:11:21.422Z,1509693081.422 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:11:21.422Z,1509693081.422 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:11:21.422Z,1509693081.422 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:11:21.423Z,1509693081.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:11:21.423Z,1509693081.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:11:21.886Z,1509693081.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:22.227Z,1509693082.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:22.627Z,1509693082.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:23.000Z,1509693083.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:23.399Z,1509693083.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:23.889Z,1509693083.889 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:11:23.889Z,1509693083.889 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T07:11:23.889Z,1509693083.889 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:11:23.894Z,1509693083.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T07:11:23.895Z,1509693083.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:23.989Z,1509693083.989 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:11:24.229Z,1509693084.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:11:24.230Z,1509693084.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:24.293Z,1509693084.293 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:11:24.403Z,1509693084.403 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:11:24.632Z,1509693084.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:11:24.633Z,1509693084.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:25.006Z,1509693085.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:11:25.007Z,1509693085.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:25.403Z,1509693085.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:11:25.404Z,1509693085.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:25.830Z,1509693085.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:11:25.831Z,1509693085.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:25.925Z,1509693085.925 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:11:25.925Z,1509693085.925 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T07:11:26.016Z,1509693086.016 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:11:26.017Z,1509693086.017 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:11:26.017Z,1509693086.017 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:11:26.017Z,1509693086.017 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:11:26.227Z,1509693086.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:11:26.228Z,1509693086.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:26.631Z,1509693086.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:11:26.632Z,1509693086.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:26.999Z,1509693086.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:11:27.001Z,1509693087.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:27.401Z,1509693087.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:11:27.402Z,1509693087.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:27.894Z,1509693087.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T07:11:27.895Z,1509693087.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:28.216Z,1509693088.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:11:28.247Z,1509693088.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:28.612Z,1509693088.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:11:28.613Z,1509693088.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:29.033Z,1509693089.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:11:29.034Z,1509693089.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:29.409Z,1509693089.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:11:29.410Z,1509693089.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:29.842Z,1509693089.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:11:29.843Z,1509693089.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:30.141Z,1509693090.141 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:11:30.263Z,1509693090.263 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:11:30.264Z,1509693090.264 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:11:30.265Z,1509693090.265 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:11:30.265Z,1509693090.265 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:11:30.300Z,1509693090.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T07:11:30.301Z,1509693090.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:30.624Z,1509693090.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:11:30.629Z,1509693090.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:31.023Z,1509693091.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:31.432Z,1509693091.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:31.813Z,1509693091.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:32.213Z,1509693092.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:32.618Z,1509693092.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:33.002Z,1509693093.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:33.407Z,1509693093.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:33.819Z,1509693093.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:34.212Z,1509693094.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:34.612Z,1509693094.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:35.027Z,1509693095.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:35.407Z,1509693095.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:35.851Z,1509693095.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:36.212Z,1509693096.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:36.612Z,1509693096.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:36.999Z,1509693096.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:37.407Z,1509693097.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:37.827Z,1509693097.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:38.213Z,1509693098.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:38.609Z,1509693098.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:39.003Z,1509693099.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:39.399Z,1509693099.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:39.820Z,1509693099.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:40.272Z,1509693100.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:40.612Z,1509693100.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:41.044Z,1509693101.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:41.410Z,1509693101.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:41.875Z,1509693101.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:42.259Z,1509693102.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:42.611Z,1509693102.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:43.042Z,1509693103.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:43.415Z,1509693103.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:43.850Z,1509693103.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:44.259Z,1509693104.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:44.615Z,1509693104.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:45.015Z,1509693105.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:45.410Z,1509693105.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:45.817Z,1509693105.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:46.217Z,1509693106.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:46.641Z,1509693106.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:47.009Z,1509693107.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:47.403Z,1509693107.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:47.816Z,1509693107.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:48.215Z,1509693108.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:48.615Z,1509693108.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:49.009Z,1509693109.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:49.412Z,1509693109.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:49.856Z,1509693109.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:50.223Z,1509693110.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:50.623Z,1509693110.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:51.009Z,1509693111.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:51.409Z,1509693111.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:51.858Z,1509693111.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:52.222Z,1509693112.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:52.623Z,1509693112.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:53.021Z,1509693113.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:53.407Z,1509693113.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:53.848Z,1509693113.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:54.226Z,1509693114.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:54.317Z,1509693114.317 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T07:11:54.317Z,1509693114.317 [DropWeight] No Fault, FailCount= 1
2017-11-03T07:11:54.625Z,1509693114.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:54.717Z,1509693114.717 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T07:11:55.003Z,1509693115.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:55.399Z,1509693115.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:55.882Z,1509693115.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:56.251Z,1509693116.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:56.647Z,1509693116.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:57.004Z,1509693117.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:57.408Z,1509693117.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:57.843Z,1509693117.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:58.228Z,1509693118.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:58.654Z,1509693118.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:59.030Z,1509693119.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:59.403Z,1509693119.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:11:59.827Z,1509693119.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:00.226Z,1509693120.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:00.621Z,1509693120.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:01.010Z,1509693121.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:01.403Z,1509693121.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:01.815Z,1509693121.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:02.219Z,1509693122.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:02.615Z,1509693122.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:03.010Z,1509693123.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:03.409Z,1509693123.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:03.858Z,1509693123.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:04.217Z,1509693124.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:04.619Z,1509693124.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:05.011Z,1509693125.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:05.415Z,1509693125.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:05.874Z,1509693125.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:06.223Z,1509693126.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:06.615Z,1509693126.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:07.009Z,1509693127.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:07.413Z,1509693127.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:10.706Z,1509693130.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:10.871Z,1509693130.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:11.330Z,1509693131.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:11.664Z,1509693131.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:12.130Z,1509693132.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:12.457Z,1509693132.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:12.898Z,1509693132.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:13.299Z,1509693133.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:13.668Z,1509693133.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:14.058Z,1509693134.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:14.462Z,1509693134.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:14.870Z,1509693134.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:15.278Z,1509693135.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:15.654Z,1509693135.654 [PNI_TCM](ERROR): CRC does not match. Expected:0x65072 got:0x57344
2017-11-03T07:12:15.678Z,1509693135.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:16.059Z,1509693136.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:16.464Z,1509693136.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:16.867Z,1509693136.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:17.262Z,1509693137.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:17.669Z,1509693137.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:18.063Z,1509693138.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:18.458Z,1509693138.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:18.872Z,1509693138.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:19.271Z,1509693139.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:19.663Z,1509693139.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:20.064Z,1509693140.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:20.461Z,1509693140.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:20.867Z,1509693140.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:21.271Z,1509693141.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:21.668Z,1509693141.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:22.063Z,1509693142.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:22.462Z,1509693142.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:22.867Z,1509693142.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:23.270Z,1509693143.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:23.665Z,1509693143.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:24.058Z,1509693144.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:24.463Z,1509693144.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:24.891Z,1509693144.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:25.287Z,1509693145.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:25.667Z,1509693145.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:26.157Z,1509693146.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:26.470Z,1509693146.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:26.891Z,1509693146.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:27.287Z,1509693147.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:27.675Z,1509693147.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:28.038Z,1509693148.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:28.467Z,1509693148.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:28.845Z,1509693148.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:29.268Z,1509693149.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:29.639Z,1509693149.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:30.063Z,1509693150.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:30.475Z,1509693150.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:30.874Z,1509693150.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:31.246Z,1509693151.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:31.650Z,1509693151.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:32.069Z,1509693152.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:32.469Z,1509693152.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:32.870Z,1509693152.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:33.271Z,1509693153.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:33.670Z,1509693153.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:34.078Z,1509693154.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:34.473Z,1509693154.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:34.847Z,1509693154.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:35.248Z,1509693155.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:35.670Z,1509693155.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:36.079Z,1509693156.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:36.471Z,1509693156.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:36.875Z,1509693156.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:37.269Z,1509693157.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:37.651Z,1509693157.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:38.070Z,1509693158.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:38.445Z,1509693158.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:38.871Z,1509693158.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:39.298Z,1509693159.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:39.649Z,1509693159.649 [PNI_TCM](ERROR): CRC does not match. Expected:0x30715 got:0x119
2017-11-03T07:12:39.702Z,1509693159.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:40.105Z,1509693160.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:40.469Z,1509693160.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:40.855Z,1509693160.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:41.287Z,1509693161.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:41.650Z,1509693161.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:42.102Z,1509693162.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:42.473Z,1509693162.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:42.891Z,1509693162.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:43.250Z,1509693163.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:43.674Z,1509693163.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:44.052Z,1509693164.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:44.455Z,1509693164.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:44.855Z,1509693164.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:45.282Z,1509693165.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:45.673Z,1509693165.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:46.051Z,1509693166.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:46.451Z,1509693166.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:46.875Z,1509693166.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:47.272Z,1509693167.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:47.674Z,1509693167.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:48.074Z,1509693168.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:48.474Z,1509693168.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:48.850Z,1509693168.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:49.253Z,1509693169.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:49.651Z,1509693169.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:50.074Z,1509693170.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:50.479Z,1509693170.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:50.875Z,1509693170.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:51.250Z,1509693171.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:51.670Z,1509693171.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:52.077Z,1509693172.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:52.451Z,1509693172.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:52.874Z,1509693172.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:53.282Z,1509693173.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:53.671Z,1509693173.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:54.129Z,1509693174.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:54.450Z,1509693174.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:54.942Z,1509693174.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:55.253Z,1509693175.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:55.687Z,1509693175.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:56.080Z,1509693176.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:56.495Z,1509693176.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:56.899Z,1509693176.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:57.250Z,1509693177.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:57.653Z,1509693177.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:58.073Z,1509693178.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:58.460Z,1509693178.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:58.859Z,1509693178.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:59.281Z,1509693179.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:12:59.682Z,1509693179.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:00.059Z,1509693180.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:00.454Z,1509693180.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:00.853Z,1509693180.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:01.253Z,1509693181.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:01.653Z,1509693181.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:02.063Z,1509693182.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:02.465Z,1509693182.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:02.883Z,1509693182.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:03.235Z,1509693183.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:03.660Z,1509693183.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:04.059Z,1509693184.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:04.477Z,1509693184.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:04.881Z,1509693184.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:05.254Z,1509693185.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:05.655Z,1509693185.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:06.064Z,1509693186.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:06.080Z,1509693186.080 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T07:08:06.1Z
2017-11-03T07:13:06.080Z,1509693186.080 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T07:13:06.080Z,1509693186.080 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T07:13:06.455Z,1509693186.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:06.991Z,1509693186.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:07.263Z,1509693187.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:10.626Z,1509693190.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:10.737Z,1509693190.737 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20171103T001125/Courier0164.lzma
2017-11-03T07:13:10.807Z,1509693190.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:11.184Z,1509693191.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:11.536Z,1509693191.536 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0164.lzma.bak
2017-11-03T07:13:11.536Z,1509693191.536 [DataOverHttps](INFO): SBD MOMSN=5182996
2017-11-03T07:13:11.634Z,1509693191.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:12.211Z,1509693192.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:12.463Z,1509693192.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:15.634Z,1509693195.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:15.880Z,1509693195.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:16.182Z,1509693196.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:16.585Z,1509693196.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:16.988Z,1509693196.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:17.403Z,1509693197.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:20.701Z,1509693200.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:20.797Z,1509693200.797 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20171103T001125/Express0165.lzma
2017-11-03T07:13:20.872Z,1509693200.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:21.262Z,1509693201.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:21.595Z,1509693201.595 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0165.lzma.bak
2017-11-03T07:13:21.596Z,1509693201.596 [DataOverHttps](INFO): SBD MOMSN=5182998
2017-11-03T07:13:21.645Z,1509693201.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:21.652Z,1509693201.652 [PNI_TCM](ERROR): CRC does not match. Expected:0x52647 got:0x6593
2017-11-03T07:13:21.690Z,1509693201.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:22.338Z,1509693202.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:22.354Z,1509693202.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:22.357Z,1509693202.357 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T07:13:22.358Z,1509693202.358 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T07:13:22.358Z,1509693202.358 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T07:13:22.498Z,1509693202.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:22.515Z,1509693202.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:25.766Z,1509693205.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:25.790Z,1509693205.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:25.942Z,1509693205.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:25.980Z,1509693205.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:26.354Z,1509693206.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:26.371Z,1509693206.371 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:13:26.372Z,1509693206.372 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T07:13:26.372Z,1509693206.372 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:13:26.387Z,1509693206.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:13:26.388Z,1509693206.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:26.488Z,1509693206.488 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:13:26.489Z,1509693206.489 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T07:13:26.722Z,1509693206.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:26.754Z,1509693206.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:13:26.755Z,1509693206.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:26.776Z,1509693206.776 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:13:26.915Z,1509693206.915 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:13:27.122Z,1509693207.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:27.151Z,1509693207.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:13:27.153Z,1509693207.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:27.519Z,1509693207.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:27.578Z,1509693207.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:13:27.579Z,1509693207.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:27.928Z,1509693207.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:27.993Z,1509693207.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:13:27.994Z,1509693207.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:28.329Z,1509693208.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:28.362Z,1509693208.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:13:28.363Z,1509693208.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:28.729Z,1509693208.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:28.795Z,1509693208.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:13:28.796Z,1509693208.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:29.116Z,1509693209.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:29.131Z,1509693209.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:13:29.132Z,1509693209.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:29.516Z,1509693209.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:29.566Z,1509693209.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:13:29.567Z,1509693209.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:29.916Z,1509693209.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:29.967Z,1509693209.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:13:29.968Z,1509693209.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:30.320Z,1509693210.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:30.334Z,1509693210.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:13:30.335Z,1509693210.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:30.717Z,1509693210.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:30.731Z,1509693210.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:13:30.732Z,1509693210.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:31.130Z,1509693211.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:31.153Z,1509693211.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:13:31.154Z,1509693211.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:31.544Z,1509693211.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:31.566Z,1509693211.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:13:31.567Z,1509693211.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:31.930Z,1509693211.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:31.955Z,1509693211.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:13:31.955Z,1509693211.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:32.316Z,1509693212.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:32.330Z,1509693212.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:13:32.331Z,1509693212.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:32.733Z,1509693212.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:13:32.734Z,1509693212.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:33.131Z,1509693213.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:13:33.131Z,1509693213.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:33.534Z,1509693213.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:13:33.535Z,1509693213.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:33.929Z,1509693213.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:33.955Z,1509693213.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:13:33.956Z,1509693213.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:34.329Z,1509693214.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:34.354Z,1509693214.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:13:34.355Z,1509693214.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:34.729Z,1509693214.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:34.754Z,1509693214.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:13:34.755Z,1509693214.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:35.115Z,1509693215.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:35.129Z,1509693215.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-03T07:13:35.130Z,1509693215.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:35.516Z,1509693215.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:35.530Z,1509693215.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:13:35.531Z,1509693215.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:35.915Z,1509693215.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:35.934Z,1509693215.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:13:35.935Z,1509693215.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:36.316Z,1509693216.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:36.330Z,1509693216.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:13:36.331Z,1509693216.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:36.716Z,1509693216.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:36.730Z,1509693216.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:13:36.731Z,1509693216.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:37.129Z,1509693217.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:37.154Z,1509693217.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:13:37.155Z,1509693217.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:37.529Z,1509693217.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:37.562Z,1509693217.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:13:37.563Z,1509693217.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:37.929Z,1509693217.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:37.954Z,1509693217.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:13:37.955Z,1509693217.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:38.315Z,1509693218.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:38.334Z,1509693218.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:13:38.335Z,1509693218.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:38.719Z,1509693218.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:38.734Z,1509693218.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:13:38.734Z,1509693218.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:39.116Z,1509693219.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:39.131Z,1509693219.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:13:39.132Z,1509693219.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:39.515Z,1509693219.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:13:39.530Z,1509693219.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:13:39.531Z,1509693219.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:39.954Z,1509693219.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:13:39.955Z,1509693219.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:40.353Z,1509693220.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:13:40.354Z,1509693220.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:40.753Z,1509693220.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:13:40.754Z,1509693220.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:41.131Z,1509693221.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:13:41.132Z,1509693221.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:41.530Z,1509693221.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:13:41.531Z,1509693221.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:41.978Z,1509693221.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:13:41.979Z,1509693221.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:42.378Z,1509693222.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:13:42.379Z,1509693222.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:42.730Z,1509693222.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:13:42.731Z,1509693222.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:43.190Z,1509693223.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:13:43.191Z,1509693223.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:43.558Z,1509693223.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:13:43.559Z,1509693223.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:43.978Z,1509693223.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:13:43.979Z,1509693223.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:44.374Z,1509693224.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:13:44.375Z,1509693224.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:44.758Z,1509693224.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:13:44.759Z,1509693224.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:45.131Z,1509693225.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:13:45.131Z,1509693225.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:45.542Z,1509693225.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:13:45.543Z,1509693225.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:45.965Z,1509693225.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T07:13:45.966Z,1509693225.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:46.344Z,1509693226.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:46.763Z,1509693226.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:47.138Z,1509693227.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:47.539Z,1509693227.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:47.943Z,1509693227.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:48.332Z,1509693228.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:48.735Z,1509693228.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:49.163Z,1509693229.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:49.563Z,1509693229.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:49.944Z,1509693229.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:50.335Z,1509693230.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:50.735Z,1509693230.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:51.135Z,1509693231.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:51.533Z,1509693231.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:51.967Z,1509693231.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:52.360Z,1509693232.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:52.764Z,1509693232.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:53.136Z,1509693233.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:53.543Z,1509693233.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:53.936Z,1509693233.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:54.339Z,1509693234.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:54.743Z,1509693234.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:55.163Z,1509693235.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:55.562Z,1509693235.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:55.964Z,1509693235.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:56.378Z,1509693236.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:56.786Z,1509693236.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:57.143Z,1509693237.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:57.578Z,1509693237.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:57.949Z,1509693237.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:58.379Z,1509693238.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:58.779Z,1509693238.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:59.143Z,1509693239.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:59.543Z,1509693239.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:13:59.943Z,1509693239.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:00.338Z,1509693240.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:00.735Z,1509693240.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:01.147Z,1509693241.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:01.547Z,1509693241.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:01.948Z,1509693241.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:02.344Z,1509693242.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:02.739Z,1509693242.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:03.137Z,1509693243.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:03.551Z,1509693243.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:03.956Z,1509693243.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:04.356Z,1509693244.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:04.744Z,1509693244.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:05.130Z,1509693245.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:05.539Z,1509693245.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:05.968Z,1509693245.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:06.342Z,1509693246.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:06.735Z,1509693246.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:07.159Z,1509693247.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:07.563Z,1509693247.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:07.961Z,1509693247.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:08.334Z,1509693248.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:08.734Z,1509693248.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:09.139Z,1509693249.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:09.539Z,1509693249.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:09.963Z,1509693249.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:10.361Z,1509693250.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:10.823Z,1509693250.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:11.140Z,1509693251.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:11.541Z,1509693251.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:11.971Z,1509693251.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:12.342Z,1509693252.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:12.771Z,1509693252.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:13.178Z,1509693253.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:13.547Z,1509693253.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:13.944Z,1509693253.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:14.343Z,1509693254.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:14.743Z,1509693254.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:15.147Z,1509693255.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:15.543Z,1509693255.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:15.944Z,1509693255.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:16.344Z,1509693256.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:16.744Z,1509693256.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:17.140Z,1509693257.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:17.546Z,1509693257.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:17.938Z,1509693257.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:18.336Z,1509693258.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:18.743Z,1509693258.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:19.151Z,1509693259.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:19.548Z,1509693259.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:19.955Z,1509693259.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:20.339Z,1509693260.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:20.742Z,1509693260.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:21.140Z,1509693261.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:21.538Z,1509693261.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:21.539Z,1509693261.539 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 140
2017-11-03T07:14:21.539Z,1509693261.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:14:21.541Z,1509693261.541 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:21.541Z,1509693261.541 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 140
2017-11-03T07:14:21.541Z,1509693261.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:14:21.543Z,1509693261.543 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:21.543Z,1509693261.543 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 140
2017-11-03T07:14:21.543Z,1509693261.543 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:14:21.621Z,1509693261.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:14:21.621Z,1509693261.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:14:21.621Z,1509693261.621 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:14:22.038Z,1509693262.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:14:22.038Z,1509693262.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 140
2017-11-03T07:14:22.039Z,1509693262.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:14:22.039Z,1509693262.039 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 140
2017-11-03T07:14:22.039Z,1509693262.039 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:14:22.039Z,1509693262.039 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 140
2017-11-03T07:14:22.355Z,1509693262.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:14:22.355Z,1509693262.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:14:22.356Z,1509693262.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:14:22.356Z,1509693262.356 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:14:22.357Z,1509693262.357 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:14:22.357Z,1509693262.357 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:14:22.357Z,1509693262.357 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:14:22.358Z,1509693262.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:14:22.358Z,1509693262.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:14:22.758Z,1509693262.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:14:22.759Z,1509693262.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:23.133Z,1509693263.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:14:23.134Z,1509693263.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:26.314Z,1509693266.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:14:26.315Z,1509693266.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:26.471Z,1509693266.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T07:14:26.472Z,1509693266.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:26.873Z,1509693266.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T07:14:26.874Z,1509693266.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:27.310Z,1509693267.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T07:14:27.311Z,1509693267.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:27.677Z,1509693267.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T07:14:27.678Z,1509693267.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:28.106Z,1509693268.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T07:14:28.107Z,1509693268.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:28.505Z,1509693268.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T07:14:28.506Z,1509693268.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:28.870Z,1509693268.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T07:14:28.871Z,1509693268.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:29.290Z,1509693269.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T07:14:29.291Z,1509693269.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:29.659Z,1509693269.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x64800 got:0x20074
2017-11-03T07:14:29.686Z,1509693269.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T07:14:29.687Z,1509693269.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:30.076Z,1509693270.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T07:14:30.077Z,1509693270.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:30.479Z,1509693270.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T07:14:30.480Z,1509693270.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:30.878Z,1509693270.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T07:14:30.879Z,1509693270.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:31.278Z,1509693271.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T07:14:31.279Z,1509693271.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:31.663Z,1509693271.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T07:14:31.664Z,1509693271.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:32.067Z,1509693272.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T07:14:32.068Z,1509693272.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:32.469Z,1509693272.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T07:14:32.470Z,1509693272.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:32.874Z,1509693272.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T07:14:32.875Z,1509693272.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:33.279Z,1509693273.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T07:14:33.280Z,1509693273.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:33.675Z,1509693273.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T07:14:33.676Z,1509693273.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:34.070Z,1509693274.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T07:14:34.071Z,1509693274.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:34.467Z,1509693274.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T07:14:34.468Z,1509693274.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:34.868Z,1509693274.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T07:14:34.869Z,1509693274.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:35.265Z,1509693275.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T07:14:35.266Z,1509693275.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:35.706Z,1509693275.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T07:14:35.707Z,1509693275.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:36.071Z,1509693276.071 [PNI_TCM](ERROR): CRC does not match. Expected:0x59346 got:0x192
2017-11-03T07:14:36.104Z,1509693276.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T07:14:36.105Z,1509693276.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:36.479Z,1509693276.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T07:14:36.480Z,1509693276.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:36.879Z,1509693276.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T07:14:36.880Z,1509693276.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:37.286Z,1509693277.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T07:14:37.287Z,1509693277.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:37.662Z,1509693277.662 [PNI_TCM](ERROR): CRC does not match. Expected:0x42246 got:0x20137
2017-11-03T07:14:37.690Z,1509693277.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T07:14:37.691Z,1509693277.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:38.067Z,1509693278.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T07:14:38.069Z,1509693278.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:38.478Z,1509693278.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T07:14:38.479Z,1509693278.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:38.890Z,1509693278.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T07:14:38.891Z,1509693278.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:39.282Z,1509693279.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T07:14:39.283Z,1509693279.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:39.676Z,1509693279.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T07:14:39.677Z,1509693279.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:40.064Z,1509693280.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T07:14:40.065Z,1509693280.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:40.524Z,1509693280.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T07:14:40.525Z,1509693280.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:40.918Z,1509693280.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T07:14:40.919Z,1509693280.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:41.264Z,1509693281.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T07:14:41.265Z,1509693281.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:41.711Z,1509693281.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:42.079Z,1509693282.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:42.507Z,1509693282.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:42.914Z,1509693282.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:43.275Z,1509693283.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:43.643Z,1509693283.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:43.674Z,1509693283.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:44.055Z,1509693284.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:44.070Z,1509693284.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:44.441Z,1509693284.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:44.467Z,1509693284.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:44.859Z,1509693284.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:44.873Z,1509693284.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:45.265Z,1509693285.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:45.280Z,1509693285.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:45.662Z,1509693285.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:45.681Z,1509693285.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:46.040Z,1509693286.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:46.068Z,1509693286.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:46.440Z,1509693286.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:46.475Z,1509693286.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:46.841Z,1509693286.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:46.887Z,1509693286.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:47.243Z,1509693287.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:47.263Z,1509693287.263 [PNI_TCM](ERROR): CRC does not match. Expected:0x11895 got:0x20201
2017-11-03T07:14:47.283Z,1509693287.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:47.639Z,1509693287.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:47.666Z,1509693287.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:48.062Z,1509693288.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:48.077Z,1509693288.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:48.461Z,1509693288.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:48.487Z,1509693288.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:48.861Z,1509693288.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:48.876Z,1509693288.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:49.242Z,1509693289.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:49.269Z,1509693289.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:49.643Z,1509693289.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:49.671Z,1509693289.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:50.044Z,1509693290.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:50.074Z,1509693290.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:50.441Z,1509693290.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:50.470Z,1509693290.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:50.866Z,1509693290.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:50.881Z,1509693290.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:51.265Z,1509693291.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:51.287Z,1509693291.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:51.665Z,1509693291.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:14:51.680Z,1509693291.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:52.070Z,1509693292.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:52.469Z,1509693292.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:52.879Z,1509693292.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:53.266Z,1509693293.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:53.668Z,1509693293.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:54.083Z,1509693294.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:54.486Z,1509693294.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:54.927Z,1509693294.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:55.271Z,1509693295.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:55.669Z,1509693295.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:56.075Z,1509693296.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:56.475Z,1509693296.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:56.881Z,1509693296.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:57.287Z,1509693297.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:57.683Z,1509693297.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:58.057Z,1509693298.057 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:14:58.058Z,1509693298.058 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:14:58.058Z,1509693298.058 [BPC1](ERROR): Communications Fault
2017-11-03T07:14:58.087Z,1509693298.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:58.185Z,1509693298.185 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:14:58.475Z,1509693298.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:58.872Z,1509693298.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:59.258Z,1509693299.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:14:59.357Z,1509693299.357 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:14:59.357Z,1509693299.357 [BPC1] No Fault, FailCount= 1
2017-11-03T07:14:59.723Z,1509693299.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:00.069Z,1509693300.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:00.457Z,1509693300.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:00.472Z,1509693300.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:00.852Z,1509693300.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:00.875Z,1509693300.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:01.248Z,1509693301.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:01.307Z,1509693301.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:01.651Z,1509693301.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:01.657Z,1509693301.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x54989 got:0x20179
2017-11-03T07:15:01.675Z,1509693301.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:02.054Z,1509693302.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:02.069Z,1509693302.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:02.448Z,1509693302.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:02.467Z,1509693302.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:02.854Z,1509693302.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:02.870Z,1509693302.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:03.259Z,1509693303.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:03.294Z,1509693303.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:03.655Z,1509693303.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:03.675Z,1509693303.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:04.051Z,1509693304.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:04.066Z,1509693304.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:04.444Z,1509693304.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:04.489Z,1509693304.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:04.851Z,1509693304.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:04.858Z,1509693304.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-03T07:15:04.892Z,1509693304.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:05.255Z,1509693305.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:05.269Z,1509693305.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:05.647Z,1509693305.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:05.662Z,1509693305.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:06.054Z,1509693306.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:06.071Z,1509693306.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:06.459Z,1509693306.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:06.474Z,1509693306.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:06.854Z,1509693306.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:06.869Z,1509693306.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:07.249Z,1509693307.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:07.264Z,1509693307.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:07.645Z,1509693307.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:07.678Z,1509693307.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:08.053Z,1509693308.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:08.059Z,1509693308.059 [PNI_TCM](ERROR): CRC does not match. Expected:0x45258 got:0x56289
2017-11-03T07:15:08.096Z,1509693308.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:08.449Z,1509693308.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:08.471Z,1509693308.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:08.853Z,1509693308.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:08.868Z,1509693308.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:09.259Z,1509693309.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:09.298Z,1509693309.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:09.655Z,1509693309.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:09.675Z,1509693309.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:10.054Z,1509693310.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:10.069Z,1509693310.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:10.451Z,1509693310.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:10.467Z,1509693310.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:10.848Z,1509693310.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:10.893Z,1509693310.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:11.251Z,1509693311.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:11.257Z,1509693311.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x54421 got:0x2021
2017-11-03T07:15:11.297Z,1509693311.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:11.654Z,1509693311.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:11.719Z,1509693311.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:12.059Z,1509693312.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:12.083Z,1509693312.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:12.462Z,1509693312.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:12.482Z,1509693312.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:12.863Z,1509693312.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:12.883Z,1509693312.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:13.250Z,1509693313.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:13.265Z,1509693313.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:13.653Z,1509693313.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:13.704Z,1509693313.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:14.053Z,1509693314.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:14.069Z,1509693314.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:14.454Z,1509693314.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:14.510Z,1509693314.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:14.861Z,1509693314.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:14.910Z,1509693314.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:15.257Z,1509693315.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:15.272Z,1509693315.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:15.662Z,1509693315.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:15.677Z,1509693315.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:16.055Z,1509693316.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:16.070Z,1509693316.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:16.453Z,1509693316.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:16.475Z,1509693316.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:16.850Z,1509693316.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:16.867Z,1509693316.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:17.245Z,1509693317.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:17.279Z,1509693317.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:17.645Z,1509693317.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:17.657Z,1509693317.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x15906 got:0x57323
2017-11-03T07:15:17.683Z,1509693317.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:18.061Z,1509693318.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:18.077Z,1509693318.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:18.460Z,1509693318.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:18.475Z,1509693318.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:18.862Z,1509693318.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:18.883Z,1509693318.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:19.254Z,1509693319.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:19.271Z,1509693319.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:19.642Z,1509693319.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:19.672Z,1509693319.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:20.053Z,1509693320.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:20.068Z,1509693320.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:20.448Z,1509693320.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:20.483Z,1509693320.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:20.865Z,1509693320.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:20.871Z,1509693320.871 [PNI_TCM](ERROR): CRC does not match. Expected:0x10839 got:0x55406
2017-11-03T07:15:20.910Z,1509693320.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:21.258Z,1509693321.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:21.273Z,1509693321.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:21.661Z,1509693321.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:21.676Z,1509693321.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:22.044Z,1509693322.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:22.075Z,1509693322.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:22.453Z,1509693322.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:22.459Z,1509693322.459 [PNI_TCM](ERROR): CRC does not match. Expected:0x1144 got:0x13088
2017-11-03T07:15:22.487Z,1509693322.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:22.854Z,1509693322.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:22.869Z,1509693322.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:23.257Z,1509693323.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:23.272Z,1509693323.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:26.363Z,1509693326.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:26.433Z,1509693326.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:26.589Z,1509693326.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:26.618Z,1509693326.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:26.981Z,1509693326.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:27.035Z,1509693327.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:27.382Z,1509693327.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:27.412Z,1509693327.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:27.769Z,1509693327.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:27.784Z,1509693327.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:28.176Z,1509693328.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:28.223Z,1509693328.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:28.568Z,1509693328.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:28.590Z,1509693328.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:28.986Z,1509693328.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:29.054Z,1509693329.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:29.381Z,1509693329.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:29.423Z,1509693329.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:29.782Z,1509693329.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:29.812Z,1509693329.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:30.169Z,1509693330.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:30.183Z,1509693330.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:30.568Z,1509693330.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:30.583Z,1509693330.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:30.969Z,1509693330.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:30.984Z,1509693330.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:31.369Z,1509693331.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:31.383Z,1509693331.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:31.781Z,1509693331.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:31.818Z,1509693331.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:32.181Z,1509693332.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:32.212Z,1509693332.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:32.581Z,1509693332.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:32.609Z,1509693332.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:32.973Z,1509693332.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:32.988Z,1509693332.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:33.375Z,1509693333.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:33.390Z,1509693333.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:33.786Z,1509693333.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:33.817Z,1509693333.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:34.189Z,1509693334.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:34.215Z,1509693334.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:34.585Z,1509693334.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:34.617Z,1509693334.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:34.974Z,1509693334.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:34.989Z,1509693334.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:35.375Z,1509693335.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:35.389Z,1509693335.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:35.786Z,1509693335.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:35.816Z,1509693335.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:36.185Z,1509693336.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:36.217Z,1509693336.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:36.589Z,1509693336.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:36.615Z,1509693336.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:36.977Z,1509693336.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:36.992Z,1509693336.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:37.373Z,1509693337.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:37.388Z,1509693337.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:37.825Z,1509693337.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:37.881Z,1509693337.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:38.182Z,1509693338.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:38.213Z,1509693338.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:38.586Z,1509693338.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:38.616Z,1509693338.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:38.974Z,1509693338.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:38.989Z,1509693338.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:39.370Z,1509693339.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:39.399Z,1509693339.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:39.782Z,1509693339.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:39.799Z,1509693339.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:40.182Z,1509693340.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:40.197Z,1509693340.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:40.590Z,1509693340.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:40.639Z,1509693340.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:40.977Z,1509693340.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:40.993Z,1509693340.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:41.376Z,1509693341.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:41.439Z,1509693341.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:41.790Z,1509693341.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:41.826Z,1509693341.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:42.181Z,1509693342.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:42.227Z,1509693342.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:42.584Z,1509693342.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:42.599Z,1509693342.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:42.980Z,1509693342.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:43.027Z,1509693343.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:43.377Z,1509693343.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:43.427Z,1509693343.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:43.786Z,1509693343.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:43.800Z,1509693343.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:44.186Z,1509693344.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:44.201Z,1509693344.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:44.581Z,1509693344.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:44.597Z,1509693344.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:44.973Z,1509693344.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:44.988Z,1509693344.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:45.380Z,1509693345.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:45.395Z,1509693345.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:45.778Z,1509693345.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:45.793Z,1509693345.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:46.181Z,1509693346.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:46.196Z,1509693346.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:46.586Z,1509693346.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:46.601Z,1509693346.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:46.981Z,1509693346.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:46.996Z,1509693346.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:47.378Z,1509693347.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:47.393Z,1509693347.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:47.779Z,1509693347.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:47.794Z,1509693347.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:48.180Z,1509693348.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:48.195Z,1509693348.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:48.573Z,1509693348.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:48.588Z,1509693348.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:48.982Z,1509693348.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:48.998Z,1509693348.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:49.381Z,1509693349.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:49.397Z,1509693349.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:49.794Z,1509693349.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:49.824Z,1509693349.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:50.178Z,1509693350.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:50.199Z,1509693350.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:50.576Z,1509693350.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:50.591Z,1509693350.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:50.980Z,1509693350.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:50.995Z,1509693350.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:51.378Z,1509693351.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:51.394Z,1509693351.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:51.781Z,1509693351.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:51.797Z,1509693351.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:52.185Z,1509693352.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:52.200Z,1509693352.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:52.582Z,1509693352.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:52.597Z,1509693352.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:52.977Z,1509693352.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:52.999Z,1509693352.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:53.379Z,1509693353.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:53.394Z,1509693353.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:53.782Z,1509693353.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:53.797Z,1509693353.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:54.182Z,1509693354.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:54.197Z,1509693354.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:54.585Z,1509693354.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:54.637Z,1509693354.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:54.979Z,1509693354.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:54.999Z,1509693354.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:55.379Z,1509693355.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:55.438Z,1509693355.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:55.784Z,1509693355.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:55.799Z,1509693355.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:56.186Z,1509693356.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:56.254Z,1509693356.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:56.591Z,1509693356.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:56.618Z,1509693356.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:56.986Z,1509693356.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:57.034Z,1509693357.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:57.386Z,1509693357.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:57.409Z,1509693357.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:57.788Z,1509693357.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:57.843Z,1509693357.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:58.194Z,1509693358.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:58.239Z,1509693358.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:58.594Z,1509693358.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:58.638Z,1509693358.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:58.996Z,1509693358.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:59.043Z,1509693359.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:59.379Z,1509693359.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:59.450Z,1509693359.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:15:59.786Z,1509693359.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:15:59.801Z,1509693359.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:00.204Z,1509693360.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:00.235Z,1509693360.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:00.593Z,1509693360.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:00.614Z,1509693360.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:01.001Z,1509693361.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:01.059Z,1509693361.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:01.378Z,1509693361.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:01.401Z,1509693361.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:01.792Z,1509693361.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:01.819Z,1509693361.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:02.190Z,1509693362.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:02.214Z,1509693362.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:02.588Z,1509693362.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:02.611Z,1509693362.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:02.970Z,1509693362.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:03.009Z,1509693363.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:03.371Z,1509693363.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:03.413Z,1509693363.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:03.788Z,1509693363.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:03.811Z,1509693363.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:04.191Z,1509693364.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:04.247Z,1509693364.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:04.580Z,1509693364.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:04.614Z,1509693364.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:04.970Z,1509693364.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:05.043Z,1509693365.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:05.370Z,1509693365.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:05.439Z,1509693365.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:05.790Z,1509693365.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:05.821Z,1509693365.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:06.191Z,1509693366.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:06.223Z,1509693366.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:06.607Z,1509693366.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:06.655Z,1509693366.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:06.970Z,1509693366.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:07.013Z,1509693367.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:07.369Z,1509693367.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:07.410Z,1509693367.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:07.796Z,1509693367.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:07.815Z,1509693367.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:08.184Z,1509693368.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:08.214Z,1509693368.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:08.580Z,1509693368.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:08.619Z,1509693368.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:08.970Z,1509693368.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:09.027Z,1509693369.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:09.378Z,1509693369.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:09.402Z,1509693369.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:09.780Z,1509693369.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:09.826Z,1509693369.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:10.184Z,1509693370.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:10.229Z,1509693370.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:10.580Z,1509693370.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:10.603Z,1509693370.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:10.978Z,1509693370.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:11.001Z,1509693371.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:11.379Z,1509693371.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:11.403Z,1509693371.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:11.792Z,1509693371.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:11.837Z,1509693371.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:12.186Z,1509693372.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:12.201Z,1509693372.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:12.586Z,1509693372.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:12.601Z,1509693372.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:12.978Z,1509693372.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:12.987Z,1509693372.987 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:16:12.987Z,1509693372.987 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:16:12.987Z,1509693372.987 [BPC1](ERROR): Communications Fault
2017-11-03T07:16:12.995Z,1509693372.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:13.089Z,1509693373.089 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:16:13.378Z,1509693373.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:13.393Z,1509693373.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:13.786Z,1509693373.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:13.807Z,1509693373.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:14.185Z,1509693374.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:14.200Z,1509693374.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:14.281Z,1509693374.281 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:16:14.281Z,1509693374.281 [BPC1] No Fault, FailCount= 1
2017-11-03T07:16:14.597Z,1509693374.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:14.675Z,1509693374.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:14.980Z,1509693374.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:14.995Z,1509693374.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:15.381Z,1509693375.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:15.435Z,1509693375.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:15.787Z,1509693375.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:15.802Z,1509693375.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:16.186Z,1509693376.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:16.201Z,1509693376.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:16.585Z,1509693376.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:16.600Z,1509693376.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:16.980Z,1509693376.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:16.995Z,1509693376.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:17.381Z,1509693377.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:17.402Z,1509693377.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:17.787Z,1509693377.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:17.807Z,1509693377.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:18.186Z,1509693378.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:18.201Z,1509693378.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:18.586Z,1509693378.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:18.602Z,1509693378.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:18.980Z,1509693378.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:18.996Z,1509693378.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:19.379Z,1509693379.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:19.395Z,1509693379.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:19.786Z,1509693379.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:19.802Z,1509693379.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:20.186Z,1509693380.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:20.201Z,1509693380.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:20.586Z,1509693380.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:20.691Z,1509693380.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:20.980Z,1509693380.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:20.995Z,1509693380.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:21.379Z,1509693381.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:21.399Z,1509693381.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:21.784Z,1509693381.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:21.800Z,1509693381.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:22.185Z,1509693382.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:22.200Z,1509693382.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:22.585Z,1509693382.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:22.607Z,1509693382.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:22.977Z,1509693382.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:22.996Z,1509693382.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:23.381Z,1509693383.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:23.396Z,1509693383.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:26.490Z,1509693386.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:26.551Z,1509693386.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:26.711Z,1509693386.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:26.750Z,1509693386.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:27.106Z,1509693387.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:27.163Z,1509693387.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:27.497Z,1509693387.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:27.511Z,1509693387.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:27.894Z,1509693387.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:27.950Z,1509693387.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:28.292Z,1509693388.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:28.350Z,1509693388.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:28.689Z,1509693388.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:28.712Z,1509693388.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:29.105Z,1509693389.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:29.127Z,1509693389.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:29.505Z,1509693389.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:29.521Z,1509693389.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:29.905Z,1509693389.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:29.920Z,1509693389.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:30.292Z,1509693390.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:30.315Z,1509693390.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:30.690Z,1509693390.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:30.704Z,1509693390.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:31.095Z,1509693391.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:31.110Z,1509693391.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:31.500Z,1509693391.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:31.519Z,1509693391.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:31.904Z,1509693391.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:31.919Z,1509693391.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:32.304Z,1509693392.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:32.319Z,1509693392.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:32.704Z,1509693392.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:32.719Z,1509693392.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:33.096Z,1509693393.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:33.110Z,1509693393.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:33.479Z,1509693393.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:33.510Z,1509693393.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:33.892Z,1509693393.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:33.907Z,1509693393.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:34.280Z,1509693394.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:34.306Z,1509693394.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:34.696Z,1509693394.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:34.711Z,1509693394.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:35.105Z,1509693395.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:35.127Z,1509693395.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:35.505Z,1509693395.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:35.526Z,1509693395.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:35.905Z,1509693395.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:35.920Z,1509693395.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:36.293Z,1509693396.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:36.308Z,1509693396.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:36.702Z,1509693396.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:36.722Z,1509693396.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:37.097Z,1509693397.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:37.113Z,1509693397.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:37.498Z,1509693397.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:37.539Z,1509693397.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:37.902Z,1509693397.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:37.917Z,1509693397.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:38.302Z,1509693398.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:38.317Z,1509693398.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:38.698Z,1509693398.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:38.729Z,1509693398.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:39.087Z,1509693399.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:39.186Z,1509693399.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:39.481Z,1509693399.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:39.513Z,1509693399.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:39.884Z,1509693399.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:39.931Z,1509693399.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:40.280Z,1509693400.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:40.321Z,1509693400.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:40.687Z,1509693400.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:40.739Z,1509693400.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:41.105Z,1509693401.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:41.159Z,1509693401.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:41.510Z,1509693401.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:41.524Z,1509693401.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:41.905Z,1509693401.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:41.921Z,1509693401.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:42.287Z,1509693402.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:42.317Z,1509693402.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:42.687Z,1509693402.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:42.717Z,1509693402.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:43.082Z,1509693403.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:43.113Z,1509693403.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:43.485Z,1509693403.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:43.499Z,1509693403.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:43.893Z,1509693403.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:43.926Z,1509693403.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:44.309Z,1509693404.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:44.324Z,1509693404.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:44.697Z,1509693404.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:44.723Z,1509693404.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:45.087Z,1509693405.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:45.124Z,1509693405.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:45.487Z,1509693405.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:45.522Z,1509693405.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:45.884Z,1509693405.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:45.899Z,1509693405.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:46.286Z,1509693406.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:46.301Z,1509693406.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:46.684Z,1509693406.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:46.699Z,1509693406.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:47.097Z,1509693407.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:47.123Z,1509693407.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:47.501Z,1509693407.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:47.534Z,1509693407.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:47.897Z,1509693407.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:47.923Z,1509693407.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:48.284Z,1509693408.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:48.299Z,1509693408.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:48.687Z,1509693408.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:48.702Z,1509693408.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:49.086Z,1509693409.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:49.101Z,1509693409.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:49.491Z,1509693409.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:49.523Z,1509693409.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:49.897Z,1509693409.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:49.923Z,1509693409.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:50.312Z,1509693410.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:50.326Z,1509693410.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:50.697Z,1509693410.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:50.721Z,1509693410.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:51.083Z,1509693411.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:51.098Z,1509693411.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:51.484Z,1509693411.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:51.542Z,1509693411.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:51.888Z,1509693411.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:51.954Z,1509693411.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:52.288Z,1509693412.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:52.303Z,1509693412.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:52.688Z,1509693412.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:52.703Z,1509693412.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:53.101Z,1509693413.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:53.146Z,1509693413.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:53.501Z,1509693413.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:53.529Z,1509693413.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:53.902Z,1509693413.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:53.947Z,1509693413.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:54.288Z,1509693414.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:54.342Z,1509693414.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:54.687Z,1509693414.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:54.702Z,1509693414.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:55.089Z,1509693415.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:55.104Z,1509693415.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:55.488Z,1509693415.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:55.511Z,1509693415.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:55.893Z,1509693415.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:55.908Z,1509693415.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:56.302Z,1509693416.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:56.330Z,1509693416.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:56.702Z,1509693416.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:56.732Z,1509693416.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:57.087Z,1509693417.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:57.102Z,1509693417.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:57.488Z,1509693417.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:57.511Z,1509693417.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:57.892Z,1509693417.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:57.907Z,1509693417.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:58.288Z,1509693418.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:58.303Z,1509693418.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:58.688Z,1509693418.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:58.703Z,1509693418.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:59.101Z,1509693419.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:59.131Z,1509693419.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:59.501Z,1509693419.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:59.529Z,1509693419.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:16:59.902Z,1509693419.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:16:59.933Z,1509693419.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:00.288Z,1509693420.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:00.303Z,1509693420.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:00.689Z,1509693420.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:00.704Z,1509693420.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:01.090Z,1509693421.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:01.105Z,1509693421.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:01.489Z,1509693421.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:01.504Z,1509693421.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:01.901Z,1509693421.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:01.931Z,1509693421.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:02.305Z,1509693422.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:02.328Z,1509693422.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:02.702Z,1509693422.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:02.732Z,1509693422.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:03.090Z,1509693423.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:03.104Z,1509693423.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:03.489Z,1509693423.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:03.504Z,1509693423.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:03.889Z,1509693423.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:03.904Z,1509693423.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:04.294Z,1509693424.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:04.303Z,1509693424.303 [BPC1](ERROR): Failed to parse message.
2017-11-03T07:17:04.303Z,1509693424.303 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T07:17:04.303Z,1509693424.303 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:17:04.303Z,1509693424.303 [BPC1](ERROR): Data Fault
2017-11-03T07:17:04.311Z,1509693424.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:04.413Z,1509693424.413 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:17:04.690Z,1509693424.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:04.705Z,1509693424.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:05.101Z,1509693425.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:05.132Z,1509693425.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:05.505Z,1509693425.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:05.537Z,1509693425.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:05.626Z,1509693425.626 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:17:05.626Z,1509693425.626 [BPC1] No Fault, FailCount= 1
2017-11-03T07:17:05.906Z,1509693425.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:05.986Z,1509693425.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:06.293Z,1509693426.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:06.308Z,1509693426.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:06.691Z,1509693426.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:06.736Z,1509693426.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:07.087Z,1509693427.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:07.114Z,1509693427.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:07.492Z,1509693427.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:07.508Z,1509693427.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:07.906Z,1509693427.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:07.920Z,1509693427.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:08.303Z,1509693428.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:08.319Z,1509693428.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:08.704Z,1509693428.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:08.720Z,1509693428.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:09.095Z,1509693429.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:09.110Z,1509693429.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:09.495Z,1509693429.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:09.515Z,1509693429.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:09.892Z,1509693429.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:09.907Z,1509693429.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:10.296Z,1509693430.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:10.311Z,1509693430.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:10.695Z,1509693430.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:10.715Z,1509693430.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:11.104Z,1509693431.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:11.127Z,1509693431.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:11.504Z,1509693431.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:11.518Z,1509693431.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:11.904Z,1509693431.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:11.920Z,1509693431.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:12.292Z,1509693432.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:12.307Z,1509693432.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:12.690Z,1509693432.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:12.705Z,1509693432.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:13.096Z,1509693433.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:13.111Z,1509693433.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:13.492Z,1509693433.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:13.511Z,1509693433.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:13.905Z,1509693433.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:13.920Z,1509693433.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:14.304Z,1509693434.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:14.319Z,1509693434.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:14.704Z,1509693434.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:14.719Z,1509693434.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:15.097Z,1509693435.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:15.112Z,1509693435.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:15.496Z,1509693435.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:15.511Z,1509693435.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:15.894Z,1509693435.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:15.909Z,1509693435.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:16.297Z,1509693436.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:16.311Z,1509693436.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:16.679Z,1509693436.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:16.711Z,1509693436.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:17.104Z,1509693437.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:17.127Z,1509693437.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:17.502Z,1509693437.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:17.522Z,1509693437.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:17.904Z,1509693437.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:17.970Z,1509693437.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:18.295Z,1509693438.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:18.310Z,1509693438.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:18.695Z,1509693438.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:18.710Z,1509693438.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:19.095Z,1509693439.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:19.114Z,1509693439.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:19.494Z,1509693439.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:19.515Z,1509693439.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:19.904Z,1509693439.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:19.919Z,1509693439.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:20.300Z,1509693440.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:20.315Z,1509693440.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:20.704Z,1509693440.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:20.726Z,1509693440.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:21.095Z,1509693441.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:21.109Z,1509693441.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:21.489Z,1509693441.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:21.509Z,1509693441.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:21.892Z,1509693441.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:21.900Z,1509693441.900 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:17:21.900Z,1509693441.900 [BPC1] Communications Fault, FailCount= 2
2017-11-03T07:17:21.900Z,1509693441.900 [BPC1](ERROR): Communications Fault
2017-11-03T07:17:21.909Z,1509693441.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:22.005Z,1509693442.005 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:17:22.296Z,1509693442.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:22.311Z,1509693442.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:22.694Z,1509693442.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:22.709Z,1509693442.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:22.709Z,1509693442.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 141
2017-11-03T07:17:22.709Z,1509693442.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:17:22.711Z,1509693442.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:22.711Z,1509693442.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 141
2017-11-03T07:17:22.711Z,1509693442.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:17:22.713Z,1509693442.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:22.713Z,1509693442.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 141
2017-11-03T07:17:22.713Z,1509693442.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:17:22.789Z,1509693442.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:17:22.789Z,1509693442.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:17:22.789Z,1509693442.789 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:17:23.097Z,1509693443.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:23.204Z,1509693443.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:17:23.205Z,1509693443.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 141
2017-11-03T07:17:23.205Z,1509693443.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:17:23.205Z,1509693443.205 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 141
2017-11-03T07:17:23.206Z,1509693443.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:17:23.206Z,1509693443.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 141
2017-11-03T07:17:23.206Z,1509693443.206 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:17:23.206Z,1509693443.206 [BPC1] No Fault, FailCount= 2
2017-11-03T07:17:23.502Z,1509693443.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:23.558Z,1509693443.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:17:23.558Z,1509693443.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:17:23.559Z,1509693443.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:17:23.559Z,1509693443.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:17:23.560Z,1509693443.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:17:23.560Z,1509693443.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:17:23.561Z,1509693443.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:17:23.561Z,1509693443.561 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:17:23.562Z,1509693443.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:17:26.582Z,1509693446.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:26.634Z,1509693446.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T07:17:26.635Z,1509693446.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:26.782Z,1509693446.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:26.811Z,1509693446.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T07:17:26.812Z,1509693446.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:27.179Z,1509693447.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:27.221Z,1509693447.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T07:17:27.222Z,1509693447.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:27.580Z,1509693447.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:27.594Z,1509693447.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T07:17:27.595Z,1509693447.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:27.990Z,1509693447.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:28.022Z,1509693448.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T07:17:28.024Z,1509693448.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:28.389Z,1509693448.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:28.421Z,1509693448.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T07:17:28.422Z,1509693448.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:28.790Z,1509693448.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:28.819Z,1509693448.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T07:17:28.821Z,1509693448.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:29.175Z,1509693449.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:29.198Z,1509693449.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T07:17:29.199Z,1509693449.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:29.575Z,1509693449.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:29.590Z,1509693449.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T07:17:29.590Z,1509693449.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:29.977Z,1509693449.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:29.991Z,1509693449.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T07:17:29.992Z,1509693449.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:30.380Z,1509693450.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:30.394Z,1509693450.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T07:17:30.395Z,1509693450.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:30.789Z,1509693450.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:30.803Z,1509693450.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T07:17:30.825Z,1509693450.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:31.194Z,1509693451.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:31.208Z,1509693451.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T07:17:31.225Z,1509693451.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:31.590Z,1509693451.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:31.604Z,1509693451.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T07:17:31.605Z,1509693451.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:31.984Z,1509693451.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:31.998Z,1509693451.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T07:17:31.999Z,1509693451.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:32.380Z,1509693452.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:32.394Z,1509693452.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T07:17:32.395Z,1509693452.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:32.799Z,1509693452.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:32.837Z,1509693452.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T07:17:32.838Z,1509693452.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:33.193Z,1509693453.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:33.214Z,1509693453.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T07:17:33.215Z,1509693453.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:33.590Z,1509693453.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:33.605Z,1509693453.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-03T07:17:33.606Z,1509693453.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:33.987Z,1509693453.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:34.001Z,1509693454.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T07:17:34.002Z,1509693454.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:34.386Z,1509693454.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:34.401Z,1509693454.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T07:17:34.402Z,1509693454.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:34.788Z,1509693454.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:34.803Z,1509693454.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T07:17:34.804Z,1509693454.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:35.193Z,1509693455.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:35.208Z,1509693455.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T07:17:35.209Z,1509693455.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:35.593Z,1509693455.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:35.608Z,1509693455.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T07:17:35.609Z,1509693455.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:35.987Z,1509693455.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:36.006Z,1509693456.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T07:17:36.007Z,1509693456.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:36.386Z,1509693456.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:36.401Z,1509693456.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T07:17:36.402Z,1509693456.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:36.793Z,1509693456.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:36.808Z,1509693456.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-03T07:17:36.809Z,1509693456.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:37.188Z,1509693457.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:37.254Z,1509693457.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-03T07:17:37.255Z,1509693457.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:37.596Z,1509693457.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:37.611Z,1509693457.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T07:17:37.612Z,1509693457.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:37.987Z,1509693457.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:38.002Z,1509693458.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T07:17:38.003Z,1509693458.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:38.381Z,1509693458.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:38.450Z,1509693458.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T07:17:38.451Z,1509693458.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:38.798Z,1509693458.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:38.819Z,1509693458.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T07:17:38.820Z,1509693458.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:39.196Z,1509693459.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:39.238Z,1509693459.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T07:17:39.239Z,1509693459.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:39.596Z,1509693459.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:39.618Z,1509693459.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T07:17:39.619Z,1509693459.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:39.985Z,1509693459.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:40.045Z,1509693460.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T07:17:40.046Z,1509693460.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:40.385Z,1509693460.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:40.441Z,1509693460.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T07:17:40.442Z,1509693460.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:40.796Z,1509693460.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:40.811Z,1509693460.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T07:17:40.812Z,1509693460.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:41.196Z,1509693461.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:41.211Z,1509693461.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T07:17:41.212Z,1509693461.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:41.596Z,1509693461.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:41.610Z,1509693461.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T07:17:41.611Z,1509693461.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:41.985Z,1509693461.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:41.000Z,1509693462.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T07:17:42.001Z,1509693462.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:42.384Z,1509693462.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:42.399Z,1509693462.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T07:17:42.400Z,1509693462.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:42.796Z,1509693462.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:42.811Z,1509693462.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:43.196Z,1509693463.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:43.211Z,1509693463.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:43.596Z,1509693463.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:43.619Z,1509693463.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:43.988Z,1509693463.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:44.003Z,1509693464.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:44.368Z,1509693464.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:44.400Z,1509693464.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:44.790Z,1509693464.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:44.805Z,1509693464.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:45.193Z,1509693465.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:45.208Z,1509693465.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:45.586Z,1509693465.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:45.607Z,1509693465.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:45.986Z,1509693465.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:46.001Z,1509693466.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:46.387Z,1509693466.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:46.402Z,1509693466.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:46.794Z,1509693466.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:46.815Z,1509693466.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:47.197Z,1509693467.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:47.212Z,1509693467.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:47.600Z,1509693467.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:47.618Z,1509693467.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:47.986Z,1509693467.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:48.001Z,1509693468.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:48.385Z,1509693468.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:48.406Z,1509693468.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:48.800Z,1509693468.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:48.815Z,1509693468.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:49.193Z,1509693469.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:49.208Z,1509693469.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:49.597Z,1509693469.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:49.612Z,1509693469.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:49.973Z,1509693469.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:49.999Z,1509693469.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:50.388Z,1509693470.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:50.403Z,1509693470.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:50.797Z,1509693470.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:50.819Z,1509693470.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:51.201Z,1509693471.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:51.265Z,1509693471.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:51.595Z,1509693471.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:51.610Z,1509693471.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:51.986Z,1509693471.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:52.002Z,1509693472.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:52.388Z,1509693472.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:52.423Z,1509693472.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:52.798Z,1509693472.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:52.819Z,1509693472.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:53.202Z,1509693473.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:53.258Z,1509693473.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:53.598Z,1509693473.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:53.612Z,1509693473.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:53.975Z,1509693473.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:54.046Z,1509693474.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:54.378Z,1509693474.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:54.442Z,1509693474.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:54.808Z,1509693474.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:54.831Z,1509693474.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:55.202Z,1509693475.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:55.218Z,1509693475.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:55.599Z,1509693475.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:55.614Z,1509693475.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:55.979Z,1509693475.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:56.007Z,1509693476.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:56.379Z,1509693476.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:56.415Z,1509693476.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:56.798Z,1509693476.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:56.813Z,1509693476.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:57.203Z,1509693477.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:57.218Z,1509693477.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:57.591Z,1509693477.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:57.612Z,1509693477.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:57.980Z,1509693477.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:58.006Z,1509693478.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:58.372Z,1509693478.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:58.402Z,1509693478.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:58.791Z,1509693478.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:58.811Z,1509693478.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:59.197Z,1509693479.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:59.212Z,1509693479.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:59.593Z,1509693479.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:17:59.608Z,1509693479.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:17:59.980Z,1509693479.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:00.014Z,1509693480.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:00.376Z,1509693480.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:00.402Z,1509693480.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:00.802Z,1509693480.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:00.817Z,1509693480.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:01.198Z,1509693481.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:01.213Z,1509693481.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:01.593Z,1509693481.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:01.609Z,1509693481.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:01.976Z,1509693481.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:02.010Z,1509693482.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:02.379Z,1509693482.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:02.405Z,1509693482.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:02.798Z,1509693482.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:02.813Z,1509693482.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:03.202Z,1509693483.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:03.217Z,1509693483.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:03.599Z,1509693483.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:03.619Z,1509693483.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:03.978Z,1509693483.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:04.005Z,1509693484.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:04.375Z,1509693484.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:04.402Z,1509693484.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:04.799Z,1509693484.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:04.814Z,1509693484.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:05.198Z,1509693485.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:05.266Z,1509693485.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:05.602Z,1509693485.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:05.617Z,1509693485.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:05.980Z,1509693485.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:06.011Z,1509693486.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:06.376Z,1509693486.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:06.436Z,1509693486.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:06.800Z,1509693486.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:06.819Z,1509693486.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:07.189Z,1509693487.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:07.219Z,1509693487.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:07.589Z,1509693487.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:07.643Z,1509693487.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:07.979Z,1509693487.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:08.014Z,1509693488.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:08.376Z,1509693488.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:08.431Z,1509693488.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:08.789Z,1509693488.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:08.860Z,1509693488.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:09.199Z,1509693489.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:09.213Z,1509693489.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:09.590Z,1509693489.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:09.620Z,1509693489.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:09.980Z,1509693489.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:10.011Z,1509693490.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:10.379Z,1509693490.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:10.414Z,1509693490.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:10.790Z,1509693490.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:10.819Z,1509693490.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:11.198Z,1509693491.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:11.213Z,1509693491.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:11.601Z,1509693491.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:11.615Z,1509693491.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:11.980Z,1509693491.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:12.011Z,1509693492.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:12.376Z,1509693492.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:12.395Z,1509693492.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:12.790Z,1509693492.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:12.829Z,1509693492.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:13.189Z,1509693493.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:13.219Z,1509693493.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:13.590Z,1509693493.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:13.620Z,1509693493.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:13.976Z,1509693493.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:13.991Z,1509693493.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:14.375Z,1509693494.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:14.391Z,1509693494.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:14.790Z,1509693494.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:14.820Z,1509693494.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:15.189Z,1509693495.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:15.220Z,1509693495.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:15.590Z,1509693495.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:15.621Z,1509693495.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:15.976Z,1509693495.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:15.992Z,1509693495.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:16.383Z,1509693496.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:16.398Z,1509693496.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:16.790Z,1509693496.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:16.820Z,1509693496.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:17.194Z,1509693497.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:17.217Z,1509693497.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:17.590Z,1509693497.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:17.624Z,1509693497.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:17.976Z,1509693497.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:17.992Z,1509693497.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:18.379Z,1509693498.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:18.395Z,1509693498.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:18.790Z,1509693498.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:18.821Z,1509693498.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:19.190Z,1509693499.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:19.223Z,1509693499.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:19.590Z,1509693499.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:19.639Z,1509693499.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:19.978Z,1509693499.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:19.993Z,1509693499.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:20.376Z,1509693500.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:20.391Z,1509693500.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:20.790Z,1509693500.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:20.847Z,1509693500.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:21.190Z,1509693501.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:21.221Z,1509693501.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:21.586Z,1509693501.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:21.620Z,1509693501.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:21.979Z,1509693501.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:22.027Z,1509693502.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:22.376Z,1509693502.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:22.391Z,1509693502.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:22.790Z,1509693502.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:22.835Z,1509693502.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:22.838Z,1509693502.838 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T07:18:22.838Z,1509693502.838 [Default:CheckIn:C.Wait] Stopped
2017-11-03T07:18:22.838Z,1509693502.838 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T07:18:22.838Z,1509693502.838 [Default:CheckIn:D] Running Loop=1
2017-11-03T07:18:23.189Z,1509693503.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:23.235Z,1509693503.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:23.239Z,1509693503.239 [Default:CheckIn:D] Stopped
2017-11-03T07:18:23.239Z,1509693503.239 [Default:CheckIn:E] Running Loop=1
2017-11-03T07:18:23.590Z,1509693503.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:23.621Z,1509693503.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:23.625Z,1509693503.625 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 423.261198 min 
2017-11-03T07:18:23.625Z,1509693503.625 [Default:CheckIn:E] Stopped
2017-11-03T07:18:23.625Z,1509693503.625 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T07:18:23.625Z,1509693503.625 [Default:CheckIn] Stopped
2017-11-03T07:18:23.625Z,1509693503.625 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T07:18:23.626Z,1509693503.626 [Default:CheckIn](INFO): Running loop #42
2017-11-03T07:18:23.626Z,1509693503.626 [Default:CheckIn] Running Loop=42
2017-11-03T07:18:23.626Z,1509693503.626 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T07:18:23.626Z,1509693503.626 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T07:18:26.695Z,1509693506.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:26.720Z,1509693506.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:26.863Z,1509693506.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:26.881Z,1509693506.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:27.269Z,1509693507.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:27.284Z,1509693507.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:27.672Z,1509693507.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:27.687Z,1509693507.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:28.069Z,1509693508.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:28.084Z,1509693508.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:28.461Z,1509693508.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:28.476Z,1509693508.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:28.857Z,1509693508.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:28.873Z,1509693508.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:29.261Z,1509693509.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:29.276Z,1509693509.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:29.662Z,1509693509.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:29.677Z,1509693509.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:30.072Z,1509693510.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:30.087Z,1509693510.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:30.469Z,1509693510.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:30.491Z,1509693510.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:30.876Z,1509693510.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:30.895Z,1509693510.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:31.260Z,1509693511.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:31.276Z,1509693511.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:31.659Z,1509693511.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:31.674Z,1509693511.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:32.061Z,1509693512.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:32.076Z,1509693512.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:32.462Z,1509693512.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:32.483Z,1509693512.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:32.870Z,1509693512.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:32.885Z,1509693512.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:33.272Z,1509693513.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:33.287Z,1509693513.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:33.669Z,1509693513.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:33.734Z,1509693513.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:34.057Z,1509693514.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:34.091Z,1509693514.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:34.461Z,1509693514.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:34.468Z,1509693514.468 [PNI_TCM](ERROR): CRC does not match. Expected:0x39703 got:0x16864
2017-11-03T07:18:34.481Z,1509693514.481 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T07:18:34.481Z,1509693514.481 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:18:34.481Z,1509693514.481 [BPC1](ERROR): Data Fault
2017-11-03T07:18:34.495Z,1509693514.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:34.589Z,1509693514.589 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:18:34.847Z,1509693514.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:34.873Z,1509693514.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:35.249Z,1509693515.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:35.279Z,1509693515.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:35.664Z,1509693515.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:35.679Z,1509693515.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:35.776Z,1509693515.776 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:18:35.777Z,1509693515.777 [BPC1] No Fault, FailCount= 1
2017-11-03T07:18:36.066Z,1509693516.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:36.139Z,1509693516.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:36.473Z,1509693516.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:36.488Z,1509693516.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:36.873Z,1509693516.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:36.889Z,1509693516.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:37.244Z,1509693517.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:37.319Z,1509693517.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:37.650Z,1509693517.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:37.676Z,1509693517.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:38.063Z,1509693518.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:38.078Z,1509693518.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:38.448Z,1509693518.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:38.474Z,1509693518.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:38.870Z,1509693518.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:38.898Z,1509693518.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:39.271Z,1509693519.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:39.286Z,1509693519.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:39.673Z,1509693519.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:39.695Z,1509693519.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:40.047Z,1509693520.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:40.074Z,1509693520.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:40.450Z,1509693520.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:40.487Z,1509693520.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:40.863Z,1509693520.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:40.878Z,1509693520.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:41.264Z,1509693521.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:41.279Z,1509693521.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:41.652Z,1509693521.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:41.679Z,1509693521.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:42.075Z,1509693522.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:42.095Z,1509693522.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:42.475Z,1509693522.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:42.534Z,1509693522.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:42.875Z,1509693522.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:42.895Z,1509693522.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:43.246Z,1509693523.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:43.273Z,1509693523.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:43.649Z,1509693523.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:43.683Z,1509693523.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:44.054Z,1509693524.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:44.071Z,1509693524.071 [PNI_TCM](ERROR): CRC does not match. Expected:0x50676 got:0x16863
2017-11-03T07:18:44.092Z,1509693524.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:44.452Z,1509693524.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:44.482Z,1509693524.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:44.869Z,1509693524.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:44.884Z,1509693524.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:45.275Z,1509693525.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:45.290Z,1509693525.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:45.670Z,1509693525.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:45.685Z,1509693525.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:46.051Z,1509693526.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:46.082Z,1509693526.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:46.451Z,1509693526.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:46.482Z,1509693526.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:46.852Z,1509693526.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:46.902Z,1509693526.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:47.251Z,1509693527.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:47.282Z,1509693527.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:47.652Z,1509693527.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:47.683Z,1509693527.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:48.057Z,1509693528.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:48.091Z,1509693528.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:48.471Z,1509693528.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:48.486Z,1509693528.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:48.873Z,1509693528.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:48.895Z,1509693528.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:49.248Z,1509693529.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:49.303Z,1509693529.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:49.659Z,1509693529.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:49.683Z,1509693529.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:50.063Z,1509693530.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:50.110Z,1509693530.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:50.459Z,1509693530.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:50.490Z,1509693530.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:50.866Z,1509693530.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:50.915Z,1509693530.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:51.266Z,1509693531.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:51.297Z,1509693531.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:51.663Z,1509693531.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:51.711Z,1509693531.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:52.053Z,1509693532.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:52.069Z,1509693532.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:52.451Z,1509693532.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:52.470Z,1509693532.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:52.849Z,1509693532.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:52.864Z,1509693532.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:53.257Z,1509693533.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:53.302Z,1509693533.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:53.650Z,1509693533.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:53.656Z,1509693533.656 [PNI_TCM](ERROR): CRC does not match. Expected:0x41333 got:0x16864
2017-11-03T07:18:53.675Z,1509693533.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:54.061Z,1509693534.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:54.097Z,1509693534.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:54.465Z,1509693534.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:54.496Z,1509693534.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:54.867Z,1509693534.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:54.894Z,1509693534.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:55.254Z,1509693535.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:55.269Z,1509693535.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:55.657Z,1509693535.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:55.673Z,1509693535.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:56.056Z,1509693536.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:56.071Z,1509693536.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:56.453Z,1509693536.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:56.475Z,1509693536.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:56.865Z,1509693536.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:56.897Z,1509693536.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:57.265Z,1509693537.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:57.292Z,1509693537.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:57.666Z,1509693537.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:57.696Z,1509693537.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:58.058Z,1509693538.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:58.073Z,1509693538.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:58.453Z,1509693538.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:58.474Z,1509693538.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:58.855Z,1509693538.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:58.875Z,1509693538.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:59.256Z,1509693539.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:59.297Z,1509693539.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:18:59.653Z,1509693539.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:18:59.669Z,1509693539.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:00.066Z,1509693540.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:00.097Z,1509693540.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:00.469Z,1509693540.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:00.494Z,1509693540.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:00.864Z,1509693540.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:00.894Z,1509693540.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:01.253Z,1509693541.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:01.275Z,1509693541.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:01.658Z,1509693541.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:01.696Z,1509693541.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:02.056Z,1509693542.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:02.097Z,1509693542.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:02.452Z,1509693542.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:02.467Z,1509693542.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:02.867Z,1509693542.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:02.896Z,1509693542.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:03.265Z,1509693543.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:03.294Z,1509693543.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:03.665Z,1509693543.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:03.762Z,1509693543.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:04.056Z,1509693544.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:04.071Z,1509693544.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:04.457Z,1509693544.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:04.499Z,1509693544.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:04.858Z,1509693544.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:04.873Z,1509693544.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:05.258Z,1509693545.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:05.307Z,1509693545.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:05.653Z,1509693545.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:05.668Z,1509693545.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:06.070Z,1509693546.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:06.123Z,1509693546.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:06.462Z,1509693546.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:06.483Z,1509693546.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:06.869Z,1509693546.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:06.902Z,1509693546.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:07.255Z,1509693547.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:07.271Z,1509693547.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:07.656Z,1509693547.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:07.676Z,1509693547.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:08.054Z,1509693548.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:08.071Z,1509693548.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:08.458Z,1509693548.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:08.473Z,1509693548.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:08.861Z,1509693548.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:08.877Z,1509693548.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:09.270Z,1509693549.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:09.302Z,1509693549.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:09.662Z,1509693549.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:09.683Z,1509693549.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:10.058Z,1509693550.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:10.073Z,1509693550.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:10.453Z,1509693550.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:10.467Z,1509693550.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:10.857Z,1509693550.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:10.873Z,1509693550.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:11.259Z,1509693551.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:11.274Z,1509693551.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:11.656Z,1509693551.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:11.670Z,1509693551.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:12.061Z,1509693552.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:12.077Z,1509693552.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:12.463Z,1509693552.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:12.483Z,1509693552.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:12.873Z,1509693552.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:12.902Z,1509693552.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:13.258Z,1509693553.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:13.279Z,1509693553.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:13.656Z,1509693553.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:13.671Z,1509693553.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:14.065Z,1509693554.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:14.080Z,1509693554.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:14.462Z,1509693554.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:14.477Z,1509693554.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:14.865Z,1509693554.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:14.881Z,1509693554.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:15.266Z,1509693555.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:15.280Z,1509693555.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:15.667Z,1509693555.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:15.682Z,1509693555.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:16.062Z,1509693556.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:16.077Z,1509693556.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:16.460Z,1509693556.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:16.475Z,1509693556.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:16.859Z,1509693556.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:16.879Z,1509693556.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:17.261Z,1509693557.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:17.277Z,1509693557.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:17.665Z,1509693557.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:17.722Z,1509693557.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:18.066Z,1509693558.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:18.134Z,1509693558.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:18.465Z,1509693558.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:18.481Z,1509693558.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:18.868Z,1509693558.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:18.909Z,1509693558.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:19.262Z,1509693559.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:19.277Z,1509693559.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:19.659Z,1509693559.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:19.719Z,1509693559.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:20.058Z,1509693560.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:20.109Z,1509693560.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:20.460Z,1509693560.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:20.477Z,1509693560.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:20.866Z,1509693560.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:20.883Z,1509693560.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:21.265Z,1509693561.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:21.281Z,1509693561.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:21.664Z,1509693561.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:21.683Z,1509693561.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:22.058Z,1509693562.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:22.079Z,1509693562.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:22.451Z,1509693562.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:22.480Z,1509693562.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:22.855Z,1509693562.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:22.875Z,1509693562.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:23.258Z,1509693563.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:23.273Z,1509693563.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:23.663Z,1509693563.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:23.678Z,1509693563.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:26.760Z,1509693566.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:26.776Z,1509693566.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:26.921Z,1509693566.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:26.937Z,1509693566.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:27.318Z,1509693567.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:27.333Z,1509693567.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:27.712Z,1509693567.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:27.727Z,1509693567.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:28.113Z,1509693568.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:28.128Z,1509693568.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:28.514Z,1509693568.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:28.529Z,1509693568.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:28.918Z,1509693568.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:28.934Z,1509693568.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:29.322Z,1509693569.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:29.337Z,1509693569.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:29.722Z,1509693569.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:29.736Z,1509693569.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:30.115Z,1509693570.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:30.131Z,1509693570.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:30.511Z,1509693570.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:30.527Z,1509693570.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:30.913Z,1509693570.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:30.934Z,1509693570.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:31.315Z,1509693571.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:31.331Z,1509693571.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:31.712Z,1509693571.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:31.728Z,1509693571.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:32.118Z,1509693572.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:32.138Z,1509693572.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:32.517Z,1509693572.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:32.595Z,1509693572.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:32.925Z,1509693572.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:32.947Z,1509693572.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:33.315Z,1509693573.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:33.363Z,1509693573.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:33.711Z,1509693573.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:33.727Z,1509693573.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:34.117Z,1509693574.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:34.174Z,1509693574.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:34.516Z,1509693574.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:34.563Z,1509693574.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:34.925Z,1509693574.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:34.941Z,1509693574.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:35.326Z,1509693575.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:35.347Z,1509693575.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:35.726Z,1509693575.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:35.741Z,1509693575.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:36.116Z,1509693576.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:36.131Z,1509693576.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:36.512Z,1509693576.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:36.528Z,1509693576.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:36.910Z,1509693576.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:36.926Z,1509693576.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:37.309Z,1509693577.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:37.326Z,1509693577.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:37.712Z,1509693577.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:37.727Z,1509693577.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:38.125Z,1509693578.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:38.141Z,1509693578.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:38.525Z,1509693578.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:38.541Z,1509693578.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:38.925Z,1509693578.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:38.947Z,1509693578.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:39.315Z,1509693579.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:39.330Z,1509693579.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:39.714Z,1509693579.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:39.735Z,1509693579.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:40.113Z,1509693580.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:40.135Z,1509693580.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:40.513Z,1509693580.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:40.534Z,1509693580.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:40.925Z,1509693580.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:40.946Z,1509693580.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:41.323Z,1509693581.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:41.343Z,1509693581.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:41.725Z,1509693581.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:41.740Z,1509693581.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:42.115Z,1509693582.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:42.135Z,1509693582.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:42.512Z,1509693582.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:42.528Z,1509693582.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:42.913Z,1509693582.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:42.929Z,1509693582.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:43.316Z,1509693583.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:43.331Z,1509693583.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:43.712Z,1509693583.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:43.728Z,1509693583.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:44.125Z,1509693584.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:44.140Z,1509693584.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:44.524Z,1509693584.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:44.539Z,1509693584.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:44.925Z,1509693584.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:44.947Z,1509693584.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:45.313Z,1509693585.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:45.334Z,1509693585.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:45.712Z,1509693585.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:45.728Z,1509693585.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:46.116Z,1509693586.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:46.131Z,1509693586.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:46.509Z,1509693586.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:46.558Z,1509693586.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:46.922Z,1509693586.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:46.982Z,1509693586.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:47.325Z,1509693587.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:47.340Z,1509693587.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:47.726Z,1509693587.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:47.741Z,1509693587.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:48.116Z,1509693588.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:48.171Z,1509693588.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:48.513Z,1509693588.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:48.539Z,1509693588.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:48.915Z,1509693588.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:48.971Z,1509693588.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:49.302Z,1509693589.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:49.370Z,1509693589.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:49.712Z,1509693589.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:49.742Z,1509693589.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:50.129Z,1509693590.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:50.144Z,1509693590.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:50.528Z,1509693590.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:50.543Z,1509693590.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:50.925Z,1509693590.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:50.947Z,1509693590.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:51.315Z,1509693591.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:51.330Z,1509693591.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:51.715Z,1509693591.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:51.730Z,1509693591.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:52.113Z,1509693592.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:52.129Z,1509693592.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:52.514Z,1509693592.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:52.529Z,1509693592.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:52.925Z,1509693592.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:52.940Z,1509693592.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:53.325Z,1509693593.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:53.340Z,1509693593.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:53.719Z,1509693593.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:53.746Z,1509693593.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:54.115Z,1509693594.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:54.135Z,1509693594.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:54.515Z,1509693594.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:54.535Z,1509693594.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:54.914Z,1509693594.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:54.934Z,1509693594.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:55.315Z,1509693595.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:55.339Z,1509693595.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:55.713Z,1509693595.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:55.735Z,1509693595.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:56.129Z,1509693596.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:56.143Z,1509693596.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:56.529Z,1509693596.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:56.544Z,1509693596.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:56.926Z,1509693596.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:56.941Z,1509693596.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:57.313Z,1509693597.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:57.332Z,1509693597.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:57.715Z,1509693597.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:57.739Z,1509693597.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:58.115Z,1509693598.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:58.131Z,1509693598.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:58.516Z,1509693598.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:58.531Z,1509693598.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:58.927Z,1509693598.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:58.942Z,1509693598.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:59.325Z,1509693599.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:59.340Z,1509693599.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:19:59.730Z,1509693599.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:19:59.750Z,1509693599.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:00.115Z,1509693600.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:00.131Z,1509693600.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:00.513Z,1509693600.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:00.534Z,1509693600.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:00.917Z,1509693600.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:00.932Z,1509693600.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:01.319Z,1509693601.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:01.406Z,1509693601.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:01.705Z,1509693601.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:01.735Z,1509693601.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:02.128Z,1509693602.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:02.175Z,1509693602.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:02.533Z,1509693602.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:02.548Z,1509693602.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:02.927Z,1509693602.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:02.975Z,1509693602.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:03.300Z,1509693603.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:03.344Z,1509693603.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:03.707Z,1509693603.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:03.736Z,1509693603.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:04.108Z,1509693604.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:04.135Z,1509693604.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:04.505Z,1509693604.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:04.535Z,1509693604.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:04.926Z,1509693604.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:04.942Z,1509693604.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:05.330Z,1509693605.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:05.346Z,1509693605.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:05.723Z,1509693605.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:05.738Z,1509693605.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:06.107Z,1509693606.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:06.134Z,1509693606.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:06.505Z,1509693606.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:06.535Z,1509693606.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:06.905Z,1509693606.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:06.935Z,1509693606.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:07.308Z,1509693607.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:07.334Z,1509693607.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:07.704Z,1509693607.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:07.735Z,1509693607.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:08.123Z,1509693608.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:08.138Z,1509693608.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:08.530Z,1509693608.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:08.545Z,1509693608.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:08.926Z,1509693608.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:08.941Z,1509693608.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:09.304Z,1509693609.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:09.335Z,1509693609.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:09.707Z,1509693609.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:09.734Z,1509693609.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:10.105Z,1509693610.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:10.132Z,1509693610.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:10.507Z,1509693610.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:10.534Z,1509693610.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:10.926Z,1509693610.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:10.941Z,1509693610.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:11.326Z,1509693611.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:11.341Z,1509693611.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:11.750Z,1509693611.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:12.133Z,1509693612.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:12.532Z,1509693612.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:12.908Z,1509693612.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:12.936Z,1509693612.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:13.309Z,1509693613.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:13.337Z,1509693613.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:13.704Z,1509693613.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:13.737Z,1509693613.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:14.127Z,1509693614.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:14.141Z,1509693614.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:14.524Z,1509693614.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:14.539Z,1509693614.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:14.927Z,1509693614.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:14.994Z,1509693614.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:15.301Z,1509693615.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:15.332Z,1509693615.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:15.707Z,1509693615.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:15.763Z,1509693615.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:16.106Z,1509693616.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:16.141Z,1509693616.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:16.500Z,1509693616.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:16.515Z,1509693616.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:16.919Z,1509693616.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:16.981Z,1509693616.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:17.313Z,1509693617.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:17.340Z,1509693617.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:17.712Z,1509693617.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:17.767Z,1509693617.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:18.105Z,1509693618.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:18.159Z,1509693618.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:18.507Z,1509693618.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:18.531Z,1509693618.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:18.905Z,1509693618.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:18.920Z,1509693618.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:19.306Z,1509693619.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:19.321Z,1509693619.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:19.711Z,1509693619.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:19.747Z,1509693619.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:20.118Z,1509693620.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:20.142Z,1509693620.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:20.518Z,1509693620.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:20.541Z,1509693620.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:20.918Z,1509693620.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:20.942Z,1509693620.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:21.304Z,1509693621.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:21.319Z,1509693621.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:21.704Z,1509693621.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:21.719Z,1509693621.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:22.111Z,1509693622.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:22.144Z,1509693622.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:22.503Z,1509693622.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:22.517Z,1509693622.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:22.918Z,1509693622.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:22.942Z,1509693622.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:23.318Z,1509693623.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:23.341Z,1509693623.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:23.718Z,1509693623.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:23.746Z,1509693623.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:23.746Z,1509693623.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 142
2017-11-03T07:20:23.746Z,1509693623.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:20:23.748Z,1509693623.748 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:23.748Z,1509693623.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 142
2017-11-03T07:20:23.748Z,1509693623.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:20:23.750Z,1509693623.750 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:23.750Z,1509693623.750 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 142
2017-11-03T07:20:23.750Z,1509693623.750 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:20:23.829Z,1509693623.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:20:23.829Z,1509693623.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:20:23.829Z,1509693623.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:20:26.799Z,1509693626.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:26.900Z,1509693626.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:20:26.901Z,1509693626.901 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 142
2017-11-03T07:20:26.901Z,1509693626.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:20:26.901Z,1509693626.901 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 142
2017-11-03T07:20:26.902Z,1509693626.902 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:20:26.902Z,1509693626.902 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 142
2017-11-03T07:20:26.953Z,1509693626.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:26.990Z,1509693626.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:20:26.990Z,1509693626.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:20:26.991Z,1509693626.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:20:26.991Z,1509693626.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:20:26.991Z,1509693626.991 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:20:26.992Z,1509693626.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:20:26.992Z,1509693626.992 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:20:26.997Z,1509693626.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:20:26.997Z,1509693626.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:20:27.321Z,1509693627.321 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T07:20:27.321Z,1509693627.321 [NAL9602] Data Fault, FailCount= 4
2017-11-03T07:20:27.321Z,1509693627.321 [NAL9602](ERROR): Data Fault
2017-11-03T07:20:27.339Z,1509693627.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:27.381Z,1509693627.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:20:27.382Z,1509693627.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:27.461Z,1509693627.461 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T07:20:27.726Z,1509693627.726 [NAL9602](INFO): Powering down
2017-11-03T07:20:27.757Z,1509693627.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:27.774Z,1509693627.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:20:27.775Z,1509693627.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:28.137Z,1509693628.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:20:28.162Z,1509693628.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:20:28.163Z,1509693628.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:28.560Z,1509693628.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:20:28.561Z,1509693628.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:28.652Z,1509693628.652 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T07:20:28.652Z,1509693628.652 [NAL9602] No Fault, FailCount= 4
2017-11-03T07:20:28.959Z,1509693628.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:20:28.960Z,1509693628.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:29.358Z,1509693629.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:20:29.359Z,1509693629.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:29.762Z,1509693629.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:20:29.763Z,1509693629.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:30.186Z,1509693630.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:20:30.187Z,1509693630.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:30.631Z,1509693630.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T07:20:30.632Z,1509693630.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:30.965Z,1509693630.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:20:30.966Z,1509693630.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:31.364Z,1509693631.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:20:31.365Z,1509693631.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:31.774Z,1509693631.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:20:31.775Z,1509693631.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:32.165Z,1509693632.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:20:32.166Z,1509693632.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:32.586Z,1509693632.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:20:32.587Z,1509693632.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:32.987Z,1509693632.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T07:20:32.988Z,1509693632.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:33.370Z,1509693633.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:20:33.371Z,1509693633.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:33.764Z,1509693633.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:20:33.765Z,1509693633.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:34.163Z,1509693634.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:20:34.164Z,1509693634.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:34.566Z,1509693634.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:20:34.567Z,1509693634.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:34.964Z,1509693634.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:20:34.965Z,1509693634.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:35.363Z,1509693635.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:20:35.365Z,1509693635.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:35.765Z,1509693635.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:20:35.766Z,1509693635.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:36.164Z,1509693636.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:20:36.165Z,1509693636.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:36.564Z,1509693636.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:20:36.565Z,1509693636.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:36.965Z,1509693636.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:20:36.966Z,1509693636.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:37.364Z,1509693637.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:20:37.365Z,1509693637.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:37.763Z,1509693637.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:20:37.764Z,1509693637.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:38.170Z,1509693638.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:20:38.171Z,1509693638.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:38.564Z,1509693638.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:20:38.565Z,1509693638.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:38.966Z,1509693638.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:20:38.966Z,1509693638.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:39.365Z,1509693639.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:20:39.366Z,1509693639.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:39.764Z,1509693639.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:20:39.765Z,1509693639.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:40.163Z,1509693640.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:20:40.164Z,1509693640.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:40.563Z,1509693640.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:20:40.564Z,1509693640.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:40.965Z,1509693640.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:20:40.966Z,1509693640.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:41.371Z,1509693641.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:20:41.372Z,1509693641.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:41.765Z,1509693641.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:20:41.766Z,1509693641.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:42.164Z,1509693642.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:20:42.165Z,1509693642.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:42.566Z,1509693642.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:20:42.566Z,1509693642.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:42.966Z,1509693642.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:20:42.967Z,1509693642.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:43.365Z,1509693643.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:20:43.366Z,1509693643.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:43.771Z,1509693643.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:44.171Z,1509693644.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:44.565Z,1509693644.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:44.983Z,1509693644.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:45.390Z,1509693645.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:45.765Z,1509693645.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:46.166Z,1509693646.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:46.587Z,1509693646.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:46.965Z,1509693646.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:47.382Z,1509693647.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:47.777Z,1509693647.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:48.164Z,1509693648.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:48.564Z,1509693648.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:48.965Z,1509693648.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:49.364Z,1509693649.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:49.775Z,1509693649.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:50.164Z,1509693650.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:50.564Z,1509693650.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:50.964Z,1509693650.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:51.364Z,1509693651.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:51.765Z,1509693651.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:52.164Z,1509693652.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:52.565Z,1509693652.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:52.960Z,1509693652.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:53.371Z,1509693653.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:53.748Z,1509693653.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:54.148Z,1509693654.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:54.568Z,1509693654.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:54.948Z,1509693654.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:55.371Z,1509693655.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:55.770Z,1509693655.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:56.170Z,1509693656.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:56.569Z,1509693656.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:56.966Z,1509693656.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:57.372Z,1509693657.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:57.748Z,1509693657.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:58.115Z,1509693658.115 [NAL9602](INFO): Powering up NAL9602
2017-11-03T07:20:58.148Z,1509693658.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:58.571Z,1509693658.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:58.950Z,1509693658.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:59.388Z,1509693659.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:20:59.811Z,1509693659.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:00.211Z,1509693660.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:00.587Z,1509693660.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:01.011Z,1509693661.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:01.369Z,1509693661.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:01.815Z,1509693661.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:02.222Z,1509693662.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:02.579Z,1509693662.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:03.038Z,1509693663.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:03.397Z,1509693663.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:03.793Z,1509693663.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:04.187Z,1509693664.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:04.618Z,1509693664.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:05.016Z,1509693665.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:05.373Z,1509693665.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:05.782Z,1509693665.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:06.189Z,1509693666.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:06.588Z,1509693666.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:06.998Z,1509693666.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:07.393Z,1509693667.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:07.820Z,1509693667.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:08.171Z,1509693668.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:08.603Z,1509693668.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:08.930Z,1509693668.930 [NAL9602](INFO): NAL9602 initialized
2017-11-03T07:21:09.003Z,1509693669.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:09.390Z,1509693669.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:09.799Z,1509693669.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:10.175Z,1509693670.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:10.580Z,1509693670.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:10.977Z,1509693670.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:11.373Z,1509693671.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:11.765Z,1509693671.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:12.175Z,1509693672.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:12.579Z,1509693672.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:13.010Z,1509693673.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:13.383Z,1509693673.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:13.795Z,1509693673.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:14.261Z,1509693674.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:14.587Z,1509693674.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:15.031Z,1509693675.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:15.380Z,1509693675.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:15.824Z,1509693675.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:16.222Z,1509693676.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:16.576Z,1509693676.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:16.953Z,1509693676.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:17.351Z,1509693677.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:17.754Z,1509693677.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:18.152Z,1509693678.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:18.571Z,1509693678.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:18.983Z,1509693678.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:19.383Z,1509693679.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:19.777Z,1509693679.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:20.152Z,1509693680.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:20.553Z,1509693680.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:20.959Z,1509693680.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:21.351Z,1509693681.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:21.780Z,1509693681.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:22.181Z,1509693682.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:22.581Z,1509693682.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:22.952Z,1509693682.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:23.352Z,1509693683.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:23.755Z,1509693683.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:26.978Z,1509693686.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:27.155Z,1509693687.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:27.547Z,1509693687.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:27.947Z,1509693687.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:28.418Z,1509693688.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:28.736Z,1509693688.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:29.178Z,1509693689.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:29.539Z,1509693689.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:30.011Z,1509693690.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:30.382Z,1509693690.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:30.744Z,1509693690.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:31.137Z,1509693691.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:31.543Z,1509693691.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:31.943Z,1509693691.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:32.336Z,1509693692.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:32.751Z,1509693692.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:33.148Z,1509693693.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:33.544Z,1509693693.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:33.934Z,1509693693.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:34.335Z,1509693694.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:34.743Z,1509693694.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:35.151Z,1509693695.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:35.545Z,1509693695.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:35.939Z,1509693695.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:36.338Z,1509693696.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:36.755Z,1509693696.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:37.148Z,1509693697.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:37.545Z,1509693697.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:37.935Z,1509693697.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:38.343Z,1509693698.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:38.747Z,1509693698.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:39.146Z,1509693699.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:39.550Z,1509693699.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:39.941Z,1509693699.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:40.342Z,1509693700.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:40.750Z,1509693700.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:41.151Z,1509693701.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:41.549Z,1509693701.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:41.947Z,1509693701.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:42.367Z,1509693702.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:42.770Z,1509693702.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:43.159Z,1509693703.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:43.578Z,1509693703.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:43.948Z,1509693703.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:44.359Z,1509693704.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:44.794Z,1509693704.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:45.155Z,1509693705.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:45.558Z,1509693705.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:45.924Z,1509693705.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:46.347Z,1509693706.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:46.746Z,1509693706.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:47.151Z,1509693707.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:47.551Z,1509693707.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:47.949Z,1509693707.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:48.323Z,1509693708.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:48.749Z,1509693708.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:49.145Z,1509693709.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:49.545Z,1509693709.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:49.923Z,1509693709.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:50.350Z,1509693710.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:50.747Z,1509693710.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:51.151Z,1509693711.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:51.546Z,1509693711.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:51.924Z,1509693711.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:52.348Z,1509693712.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:52.750Z,1509693712.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:53.151Z,1509693713.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:53.547Z,1509693713.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:53.923Z,1509693713.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:54.322Z,1509693714.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:54.751Z,1509693714.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:54.837Z,1509693714.837 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T07:21:55.150Z,1509693715.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:55.551Z,1509693715.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:55.924Z,1509693715.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:56.322Z,1509693716.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:56.831Z,1509693716.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:57.140Z,1509693717.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:57.578Z,1509693717.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:57.931Z,1509693717.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:58.363Z,1509693718.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:58.778Z,1509693718.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:59.140Z,1509693719.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:59.552Z,1509693719.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:21:59.927Z,1509693719.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:00.331Z,1509693720.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:00.757Z,1509693720.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:01.140Z,1509693721.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:01.539Z,1509693721.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:01.933Z,1509693721.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:02.331Z,1509693722.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:02.735Z,1509693722.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:03.161Z,1509693723.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:03.539Z,1509693723.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:03.939Z,1509693723.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:04.331Z,1509693724.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:04.742Z,1509693724.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:05.139Z,1509693725.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:05.537Z,1509693725.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:05.934Z,1509693725.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:06.328Z,1509693726.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:06.743Z,1509693726.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:07.142Z,1509693727.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:07.537Z,1509693727.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:07.932Z,1509693727.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:08.338Z,1509693728.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:08.735Z,1509693728.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:09.137Z,1509693729.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:09.561Z,1509693729.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:09.939Z,1509693729.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:10.339Z,1509693730.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:10.806Z,1509693730.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:11.147Z,1509693731.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:11.571Z,1509693731.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:11.934Z,1509693731.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:12.362Z,1509693732.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:12.771Z,1509693732.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:13.140Z,1509693733.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:13.541Z,1509693733.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:13.933Z,1509693733.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:14.338Z,1509693734.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:14.743Z,1509693734.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:15.141Z,1509693735.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:15.540Z,1509693735.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:15.934Z,1509693735.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:16.334Z,1509693736.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:16.747Z,1509693736.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:17.140Z,1509693737.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:17.547Z,1509693737.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:17.940Z,1509693737.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:18.342Z,1509693738.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:18.747Z,1509693738.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:19.146Z,1509693739.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:19.540Z,1509693739.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:19.935Z,1509693739.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:20.334Z,1509693740.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:20.747Z,1509693740.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:21.147Z,1509693741.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:21.540Z,1509693741.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:21.933Z,1509693741.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:22.331Z,1509693742.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:22.740Z,1509693742.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:23.141Z,1509693743.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:23.547Z,1509693743.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:23.930Z,1509693743.930 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T07:22:23.930Z,1509693743.930 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:22:23.930Z,1509693743.930 [BPC1](ERROR): Data Fault
2017-11-03T07:22:23.938Z,1509693743.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:24.055Z,1509693744.055 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:22:27.031Z,1509693747.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:27.210Z,1509693747.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:27.587Z,1509693747.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:27.669Z,1509693747.669 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:22:27.669Z,1509693747.669 [BPC1] No Fault, FailCount= 1
2017-11-03T07:22:28.045Z,1509693748.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:28.415Z,1509693748.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:28.773Z,1509693748.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:29.172Z,1509693749.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:29.581Z,1509693749.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:29.981Z,1509693749.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:30.391Z,1509693750.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:30.784Z,1509693750.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:31.173Z,1509693751.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:31.577Z,1509693751.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:31.972Z,1509693751.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:32.372Z,1509693752.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:32.792Z,1509693752.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:33.191Z,1509693753.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:33.591Z,1509693753.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:33.974Z,1509693753.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:34.372Z,1509693754.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:34.774Z,1509693754.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:35.179Z,1509693755.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:35.573Z,1509693755.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:35.984Z,1509693755.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:36.387Z,1509693756.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:36.791Z,1509693756.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:37.174Z,1509693757.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:37.574Z,1509693757.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:37.972Z,1509693757.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:38.372Z,1509693758.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:38.780Z,1509693758.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:39.183Z,1509693759.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:39.590Z,1509693759.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:39.974Z,1509693759.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:40.438Z,1509693760.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:40.781Z,1509693760.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:41.176Z,1509693761.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:41.607Z,1509693761.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:41.984Z,1509693761.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:42.423Z,1509693762.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:42.821Z,1509693762.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:43.177Z,1509693763.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:43.575Z,1509693763.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:43.974Z,1509693763.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:44.377Z,1509693764.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:44.788Z,1509693764.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:45.184Z,1509693765.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:45.585Z,1509693765.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:45.978Z,1509693765.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:46.381Z,1509693766.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:46.778Z,1509693766.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:47.177Z,1509693767.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:47.579Z,1509693767.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:47.989Z,1509693767.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:48.387Z,1509693768.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:48.783Z,1509693768.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:49.178Z,1509693769.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:49.582Z,1509693769.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:49.981Z,1509693769.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:50.383Z,1509693770.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:50.783Z,1509693770.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:51.191Z,1509693771.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:51.591Z,1509693771.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:51.963Z,1509693771.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:52.363Z,1509693772.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:52.764Z,1509693772.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:53.180Z,1509693773.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:53.578Z,1509693773.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:53.991Z,1509693773.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:54.384Z,1509693774.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:54.814Z,1509693774.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:55.195Z,1509693775.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:55.563Z,1509693775.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:55.969Z,1509693775.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:56.399Z,1509693776.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:56.787Z,1509693776.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:57.218Z,1509693777.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:57.638Z,1509693777.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:57.963Z,1509693777.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:58.366Z,1509693778.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:58.767Z,1509693778.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:59.168Z,1509693779.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:59.567Z,1509693779.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:22:59.993Z,1509693779.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:00.393Z,1509693780.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:00.799Z,1509693780.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:01.167Z,1509693781.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:01.567Z,1509693781.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:01.971Z,1509693781.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:02.366Z,1509693782.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:02.773Z,1509693782.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:03.196Z,1509693783.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:03.571Z,1509693783.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:03.966Z,1509693783.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:04.367Z,1509693784.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:04.767Z,1509693784.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:05.167Z,1509693785.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:05.567Z,1509693785.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:05.971Z,1509693785.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:06.398Z,1509693786.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:06.780Z,1509693786.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:07.171Z,1509693787.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:07.579Z,1509693787.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:07.972Z,1509693787.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:08.368Z,1509693788.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:08.797Z,1509693788.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:09.197Z,1509693789.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:09.626Z,1509693789.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:10.018Z,1509693790.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:10.370Z,1509693790.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:10.802Z,1509693790.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:11.167Z,1509693791.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:11.606Z,1509693791.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:12.010Z,1509693792.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:12.372Z,1509693792.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:12.776Z,1509693792.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:13.170Z,1509693793.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:13.567Z,1509693793.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:13.975Z,1509693793.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:14.367Z,1509693794.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:14.784Z,1509693794.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:15.184Z,1509693795.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:15.583Z,1509693795.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:15.975Z,1509693795.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:16.369Z,1509693796.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:16.770Z,1509693796.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:17.171Z,1509693797.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:17.571Z,1509693797.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:17.983Z,1509693797.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:18.384Z,1509693798.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:18.784Z,1509693798.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:19.168Z,1509693799.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:19.575Z,1509693799.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:19.971Z,1509693799.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:20.375Z,1509693800.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:20.803Z,1509693800.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:21.176Z,1509693801.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:21.601Z,1509693801.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:21.971Z,1509693801.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:22.370Z,1509693802.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:22.771Z,1509693802.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:23.171Z,1509693803.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:23.572Z,1509693803.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:24.024Z,1509693804.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:24.028Z,1509693804.028 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T07:18:23.6Z
2017-11-03T07:23:24.028Z,1509693804.028 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T07:23:24.028Z,1509693804.028 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T07:23:27.118Z,1509693807.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:27.118Z,1509693807.118 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 143
2017-11-03T07:23:27.118Z,1509693807.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:23:27.120Z,1509693807.120 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:27.120Z,1509693807.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 143
2017-11-03T07:23:27.120Z,1509693807.120 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:23:27.122Z,1509693807.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:27.122Z,1509693807.122 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 143
2017-11-03T07:23:27.122Z,1509693807.122 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:23:27.220Z,1509693807.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:23:27.221Z,1509693807.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:23:27.221Z,1509693807.221 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:23:27.221Z,1509693807.221 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:23:27.221Z,1509693807.221 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T07:23:27.570Z,1509693807.570 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0168.lzma
2017-11-03T07:23:27.585Z,1509693807.585 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:23:27.585Z,1509693807.585 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:23:27.585Z,1509693807.585 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:23:27.585Z,1509693807.585 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:23:27.748Z,1509693807.748 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:23:27.748Z,1509693807.748 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 143
2017-11-03T07:23:27.748Z,1509693807.748 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:23:27.749Z,1509693807.749 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 143
2017-11-03T07:23:27.749Z,1509693807.749 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:23:27.749Z,1509693807.749 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 143
2017-11-03T07:23:27.915Z,1509693807.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:23:27.916Z,1509693807.916 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:23:27.916Z,1509693807.916 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:23:27.917Z,1509693807.917 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:23:27.917Z,1509693807.917 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:23:27.917Z,1509693807.917 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:23:27.918Z,1509693807.918 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:23:27.918Z,1509693807.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:23:27.918Z,1509693807.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:23:28.270Z,1509693808.270 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0168.lzma.bak
2017-11-03T07:23:28.271Z,1509693808.271 [DataOverHttps](INFO): SBD MOMSN=5183013
2017-11-03T07:23:28.359Z,1509693808.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:23:28.361Z,1509693808.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:28.915Z,1509693808.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T07:23:28.917Z,1509693808.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:29.146Z,1509693809.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:23:29.147Z,1509693809.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:31.779Z,1509693811.779 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:23:31.883Z,1509693811.883 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:23:31.884Z,1509693811.884 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:23:31.885Z,1509693811.885 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:23:31.885Z,1509693811.885 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:23:32.695Z,1509693812.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:32.934Z,1509693812.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:33.305Z,1509693813.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:33.698Z,1509693813.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:34.097Z,1509693814.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:34.499Z,1509693814.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:37.697Z,1509693817.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:37.813Z,1509693817.813 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20171103T001125/Express0169.lzma
2017-11-03T07:23:37.911Z,1509693817.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:38.257Z,1509693818.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:38.597Z,1509693818.597 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0169.lzma.bak
2017-11-03T07:23:38.598Z,1509693818.598 [DataOverHttps](INFO): SBD MOMSN=5183015
2017-11-03T07:23:38.660Z,1509693818.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:39.255Z,1509693819.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:39.258Z,1509693819.258 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T07:23:39.258Z,1509693819.258 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T07:23:39.258Z,1509693819.258 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T07:23:39.467Z,1509693819.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:42.694Z,1509693822.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:42.874Z,1509693822.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:43.263Z,1509693823.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:43.661Z,1509693823.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:44.071Z,1509693824.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:44.505Z,1509693824.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:44.914Z,1509693824.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:45.260Z,1509693825.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:45.663Z,1509693825.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:46.146Z,1509693826.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:46.478Z,1509693826.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:46.844Z,1509693826.844 [PNI_TCM](ERROR): CRC does not match. Expected:0x12446 got:0x5127
2017-11-03T07:23:46.895Z,1509693826.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:47.295Z,1509693827.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:47.667Z,1509693827.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:48.071Z,1509693828.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:48.464Z,1509693828.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:48.867Z,1509693828.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:49.274Z,1509693829.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:49.635Z,1509693829.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:50.065Z,1509693830.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:50.465Z,1509693830.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:50.870Z,1509693830.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:51.263Z,1509693831.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:51.671Z,1509693831.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:52.041Z,1509693832.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:52.470Z,1509693832.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:52.869Z,1509693832.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:53.244Z,1509693833.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:53.647Z,1509693833.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:54.067Z,1509693834.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:54.467Z,1509693834.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:54.846Z,1509693834.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x18743 got:0x1857
2017-11-03T07:23:54.868Z,1509693834.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:55.263Z,1509693835.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:55.668Z,1509693835.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:56.065Z,1509693836.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:56.469Z,1509693836.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:56.848Z,1509693836.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x47727 got:0x49596
2017-11-03T07:23:56.874Z,1509693836.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:57.271Z,1509693837.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:57.657Z,1509693837.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:58.052Z,1509693838.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:58.444Z,1509693838.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:58.861Z,1509693838.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:59.294Z,1509693839.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:23:59.646Z,1509693839.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:00.085Z,1509693840.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:00.498Z,1509693840.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:00.887Z,1509693840.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:01.294Z,1509693841.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:01.635Z,1509693841.635 [PNI_TCM](ERROR): CRC does not match. Expected:0x5728 got:0x17074
2017-11-03T07:24:01.700Z,1509693841.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:02.082Z,1509693842.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:02.451Z,1509693842.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:02.863Z,1509693842.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:03.263Z,1509693843.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:03.686Z,1509693843.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:04.046Z,1509693844.046 [PNI_TCM](ERROR): CRC does not match. Expected:0x9077 got:0x49596
2017-11-03T07:24:04.081Z,1509693844.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:04.443Z,1509693844.443 [PNI_TCM](ERROR): CRC does not match. Expected:0x19068 got:0x38663
2017-11-03T07:24:04.483Z,1509693844.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:04.849Z,1509693844.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:05.280Z,1509693845.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:05.655Z,1509693845.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:06.060Z,1509693846.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:06.462Z,1509693846.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:06.886Z,1509693846.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:07.280Z,1509693847.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:07.641Z,1509693847.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-03T07:24:07.659Z,1509693847.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:08.049Z,1509693848.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:08.463Z,1509693848.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:08.863Z,1509693848.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:09.263Z,1509693849.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:09.663Z,1509693849.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:10.063Z,1509693850.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:10.451Z,1509693850.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:10.859Z,1509693850.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:11.253Z,1509693851.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:11.681Z,1509693851.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:12.063Z,1509693852.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:12.463Z,1509693852.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:12.863Z,1509693852.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:13.301Z,1509693853.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:13.651Z,1509693853.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:14.146Z,1509693854.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:14.459Z,1509693854.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:14.906Z,1509693854.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:15.257Z,1509693855.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x21730 got:0x49596
2017-11-03T07:24:15.290Z,1509693855.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:15.695Z,1509693855.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:16.087Z,1509693856.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:16.470Z,1509693856.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:16.853Z,1509693856.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:17.255Z,1509693857.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:17.655Z,1509693857.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:18.086Z,1509693858.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:18.456Z,1509693858.456 [PNI_TCM](ERROR): CRC does not match. Expected:0x34081 got:0x49596
2017-11-03T07:24:18.494Z,1509693858.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:18.861Z,1509693858.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:19.252Z,1509693859.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:19.670Z,1509693859.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:20.049Z,1509693860.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:20.456Z,1509693860.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:20.862Z,1509693860.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:21.268Z,1509693861.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:21.671Z,1509693861.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:22.063Z,1509693862.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:22.455Z,1509693862.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:22.870Z,1509693862.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:23.236Z,1509693863.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:23.665Z,1509693863.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:24.067Z,1509693864.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:24.478Z,1509693864.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:24.868Z,1509693864.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:25.270Z,1509693865.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:25.636Z,1509693865.636 [PNI_TCM](ERROR): CRC does not match. Expected:0x53535 got:0x48285
2017-11-03T07:24:25.678Z,1509693865.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:26.068Z,1509693866.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:26.466Z,1509693866.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:26.875Z,1509693866.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:27.264Z,1509693867.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:27.695Z,1509693867.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:28.099Z,1509693868.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:28.449Z,1509693868.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:28.846Z,1509693868.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:29.267Z,1509693869.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:29.648Z,1509693869.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:30.071Z,1509693870.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:30.478Z,1509693870.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:30.878Z,1509693870.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:31.246Z,1509693871.246 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:24:31.246Z,1509693871.246 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:24:31.246Z,1509693871.246 [BPC1](ERROR): Communications Fault
2017-11-03T07:24:31.283Z,1509693871.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:31.368Z,1509693871.368 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:24:31.651Z,1509693871.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:32.051Z,1509693872.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:32.475Z,1509693872.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:32.568Z,1509693872.568 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:24:32.568Z,1509693872.568 [BPC1] No Fault, FailCount= 1
2017-11-03T07:24:32.923Z,1509693872.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:33.269Z,1509693873.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:33.670Z,1509693873.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:34.057Z,1509693874.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:34.451Z,1509693874.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:34.850Z,1509693874.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:35.255Z,1509693875.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:35.667Z,1509693875.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:36.067Z,1509693876.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:36.465Z,1509693876.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:36.858Z,1509693876.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:37.267Z,1509693877.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:37.679Z,1509693877.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:38.055Z,1509693878.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:38.463Z,1509693878.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:38.866Z,1509693878.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:39.264Z,1509693879.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:39.661Z,1509693879.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:40.058Z,1509693880.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:43.263Z,1509693883.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:43.421Z,1509693883.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:43.829Z,1509693883.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:44.225Z,1509693884.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:44.629Z,1509693884.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:45.021Z,1509693885.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:45.420Z,1509693885.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:45.819Z,1509693885.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:46.204Z,1509693886.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:46.624Z,1509693886.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:47.027Z,1509693887.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:47.422Z,1509693887.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:47.848Z,1509693887.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:48.223Z,1509693888.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:48.642Z,1509693888.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:49.004Z,1509693889.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:49.404Z,1509693889.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:49.895Z,1509693889.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:50.231Z,1509693890.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:50.673Z,1509693890.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:51.031Z,1509693891.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:51.403Z,1509693891.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:51.852Z,1509693891.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:52.203Z,1509693892.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:52.622Z,1509693892.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:53.031Z,1509693893.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:53.425Z,1509693893.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:53.855Z,1509693893.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:54.209Z,1509693894.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:54.611Z,1509693894.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:55.011Z,1509693895.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:55.411Z,1509693895.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:55.822Z,1509693895.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:56.216Z,1509693896.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:56.616Z,1509693896.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:57.011Z,1509693897.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:57.410Z,1509693897.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:57.811Z,1509693897.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:58.212Z,1509693898.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:58.609Z,1509693898.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:59.016Z,1509693899.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:59.442Z,1509693899.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:24:59.842Z,1509693899.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:00.210Z,1509693900.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:00.618Z,1509693900.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:01.011Z,1509693901.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:01.419Z,1509693901.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:01.867Z,1509693901.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:02.219Z,1509693902.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:02.623Z,1509693902.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:03.055Z,1509693903.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:03.408Z,1509693903.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:03.861Z,1509693903.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:04.253Z,1509693904.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:04.613Z,1509693904.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:05.063Z,1509693905.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:05.458Z,1509693905.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:05.867Z,1509693905.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:06.212Z,1509693906.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:06.614Z,1509693906.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:07.019Z,1509693907.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:07.412Z,1509693907.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:07.863Z,1509693907.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:08.221Z,1509693908.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:08.631Z,1509693908.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:09.014Z,1509693909.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:09.415Z,1509693909.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:09.817Z,1509693909.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:10.221Z,1509693910.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:10.623Z,1509693910.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:11.024Z,1509693911.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:11.425Z,1509693911.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:11.827Z,1509693911.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:12.221Z,1509693912.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:12.618Z,1509693912.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:13.017Z,1509693913.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:13.414Z,1509693913.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:13.828Z,1509693913.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:14.222Z,1509693914.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:14.631Z,1509693914.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:15.018Z,1509693915.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:15.418Z,1509693915.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:15.871Z,1509693915.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:16.222Z,1509693916.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:16.622Z,1509693916.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:17.031Z,1509693917.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:17.429Z,1509693917.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:17.875Z,1509693917.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:18.216Z,1509693918.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:18.603Z,1509693918.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:19.035Z,1509693919.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:19.417Z,1509693919.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:19.898Z,1509693919.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:20.270Z,1509693920.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:20.627Z,1509693920.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:21.003Z,1509693921.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:21.404Z,1509693921.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:21.876Z,1509693921.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:22.231Z,1509693922.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:22.607Z,1509693922.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:23.035Z,1509693923.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:23.416Z,1509693923.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:23.851Z,1509693923.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:24.215Z,1509693924.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:24.606Z,1509693924.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:25.011Z,1509693925.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:25.403Z,1509693925.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:25.840Z,1509693925.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:26.220Z,1509693926.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:26.619Z,1509693926.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:27.011Z,1509693927.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:27.414Z,1509693927.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:27.811Z,1509693927.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:27.940Z,1509693927.940 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:25:27.940Z,1509693927.940 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T07:25:27.940Z,1509693927.940 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:25:28.210Z,1509693928.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:25:28.211Z,1509693928.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:28.296Z,1509693928.296 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:25:28.345Z,1509693928.345 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:25:28.430Z,1509693928.430 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:25:28.621Z,1509693928.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:25:28.622Z,1509693928.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:29.019Z,1509693929.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:25:29.020Z,1509693929.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:29.419Z,1509693929.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:25:29.420Z,1509693929.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:29.819Z,1509693929.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:25:29.820Z,1509693929.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:29.912Z,1509693929.912 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:25:29.913Z,1509693929.913 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T07:25:30.044Z,1509693930.044 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:25:30.045Z,1509693930.045 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:25:30.045Z,1509693930.045 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:25:30.045Z,1509693930.045 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:25:30.216Z,1509693930.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:25:30.217Z,1509693930.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:30.631Z,1509693930.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:25:30.632Z,1509693930.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:31.014Z,1509693931.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:25:31.015Z,1509693931.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:31.412Z,1509693931.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:25:31.413Z,1509693931.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:31.830Z,1509693931.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:25:31.831Z,1509693931.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:32.223Z,1509693932.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:25:32.225Z,1509693932.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:32.678Z,1509693932.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T07:25:32.679Z,1509693932.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:33.016Z,1509693933.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:25:33.017Z,1509693933.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:33.458Z,1509693933.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:25:33.459Z,1509693933.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:33.815Z,1509693933.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:25:33.816Z,1509693933.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:34.194Z,1509693934.194 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:25:34.288Z,1509693934.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T07:25:34.289Z,1509693934.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:34.319Z,1509693934.319 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:25:34.320Z,1509693934.320 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:25:34.321Z,1509693934.321 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:25:34.321Z,1509693934.321 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:25:34.675Z,1509693934.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T07:25:34.675Z,1509693934.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:35.054Z,1509693935.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:35.445Z,1509693935.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:35.819Z,1509693935.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:36.219Z,1509693936.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:36.613Z,1509693936.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:37.019Z,1509693937.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:37.414Z,1509693937.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:37.853Z,1509693937.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:38.219Z,1509693938.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:38.623Z,1509693938.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:39.013Z,1509693939.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:39.419Z,1509693939.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:39.854Z,1509693939.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:40.217Z,1509693940.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:43.550Z,1509693943.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:43.721Z,1509693943.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:44.125Z,1509693944.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:44.516Z,1509693944.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:44.924Z,1509693944.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:45.338Z,1509693945.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:45.720Z,1509693945.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:46.117Z,1509693946.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:46.525Z,1509693946.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:46.933Z,1509693946.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:47.291Z,1509693947.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:47.704Z,1509693947.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:48.132Z,1509693948.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:48.505Z,1509693948.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:48.899Z,1509693948.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:49.301Z,1509693949.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:49.698Z,1509693949.698 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:25:49.698Z,1509693949.698 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:25:49.698Z,1509693949.698 [BPC1](ERROR): Communications Fault
2017-11-03T07:25:49.706Z,1509693949.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:49.809Z,1509693949.809 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:25:50.109Z,1509693950.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:50.503Z,1509693950.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:50.901Z,1509693950.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:50.992Z,1509693950.992 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:25:50.992Z,1509693950.992 [BPC1] No Fault, FailCount= 1
2017-11-03T07:25:51.358Z,1509693951.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:51.711Z,1509693951.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:52.105Z,1509693952.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:52.511Z,1509693952.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:52.903Z,1509693952.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:53.303Z,1509693953.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:53.705Z,1509693953.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:54.113Z,1509693954.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:54.515Z,1509693954.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:54.887Z,1509693954.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:54.902Z,1509693954.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:55.287Z,1509693955.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:55.346Z,1509693955.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:55.696Z,1509693955.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:55.711Z,1509693955.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:56.093Z,1509693956.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:56.117Z,1509693956.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:56.490Z,1509693956.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:56.513Z,1509693956.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:56.878Z,1509693956.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:56.893Z,1509693956.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:57.289Z,1509693957.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:57.347Z,1509693957.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:57.696Z,1509693957.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:57.728Z,1509693957.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:58.091Z,1509693958.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:58.155Z,1509693958.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:58.509Z,1509693958.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:58.541Z,1509693958.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:58.886Z,1509693958.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:58.921Z,1509693958.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:59.283Z,1509693959.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:59.347Z,1509693959.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:25:59.709Z,1509693959.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:25:59.732Z,1509693959.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:00.104Z,1509693960.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:00.140Z,1509693960.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:00.495Z,1509693960.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:00.540Z,1509693960.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:00.891Z,1509693960.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:00.911Z,1509693960.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:01.314Z,1509693961.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:01.342Z,1509693961.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:01.700Z,1509693961.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:01.723Z,1509693961.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:02.158Z,1509693962.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:02.205Z,1509693962.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:02.505Z,1509693962.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:02.535Z,1509693962.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:02.902Z,1509693962.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:02.929Z,1509693962.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:03.313Z,1509693963.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:03.338Z,1509693963.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:03.696Z,1509693963.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:03.735Z,1509693963.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:04.112Z,1509693964.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:04.139Z,1509693964.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:04.499Z,1509693964.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:04.561Z,1509693964.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:04.886Z,1509693964.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:04.930Z,1509693964.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:05.288Z,1509693965.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:05.327Z,1509693965.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:05.708Z,1509693965.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:05.798Z,1509693965.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:06.108Z,1509693966.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:06.183Z,1509693966.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:06.503Z,1509693966.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:06.604Z,1509693966.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:06.886Z,1509693966.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:06.931Z,1509693966.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:07.285Z,1509693967.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:07.339Z,1509693967.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:07.712Z,1509693967.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:07.869Z,1509693967.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:08.100Z,1509693968.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:08.131Z,1509693968.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:08.496Z,1509693968.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:08.563Z,1509693968.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:08.885Z,1509693968.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:08.939Z,1509693968.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:09.285Z,1509693969.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:09.332Z,1509693969.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:09.695Z,1509693969.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:09.792Z,1509693969.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:10.099Z,1509693970.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:10.139Z,1509693970.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:10.500Z,1509693970.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:10.542Z,1509693970.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:10.893Z,1509693970.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:10.912Z,1509693970.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:11.290Z,1509693971.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:11.347Z,1509693971.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:11.700Z,1509693971.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:11.807Z,1509693971.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:12.102Z,1509693972.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:12.119Z,1509693972.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:12.500Z,1509693972.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:12.539Z,1509693972.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:12.894Z,1509693972.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:12.914Z,1509693972.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:13.285Z,1509693973.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:13.319Z,1509693973.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:13.703Z,1509693973.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:13.771Z,1509693973.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:14.099Z,1509693974.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:14.134Z,1509693974.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:14.522Z,1509693974.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:14.537Z,1509693974.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:14.885Z,1509693974.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:14.899Z,1509693974.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:15.284Z,1509693975.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:15.327Z,1509693975.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:15.697Z,1509693975.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:15.729Z,1509693975.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:16.109Z,1509693976.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:16.139Z,1509693976.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:16.502Z,1509693976.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:16.533Z,1509693976.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:16.892Z,1509693976.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:16.907Z,1509693976.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:17.291Z,1509693977.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:17.311Z,1509693977.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:17.701Z,1509693977.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:17.735Z,1509693977.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:18.097Z,1509693978.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:18.129Z,1509693978.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:18.509Z,1509693978.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:18.538Z,1509693978.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:18.890Z,1509693978.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:18.905Z,1509693978.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:19.289Z,1509693979.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:19.304Z,1509693979.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:19.701Z,1509693979.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:19.732Z,1509693979.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:20.101Z,1509693980.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:20.193Z,1509693980.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:20.505Z,1509693980.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:20.530Z,1509693980.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:20.890Z,1509693980.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:20.951Z,1509693980.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:21.289Z,1509693981.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:21.304Z,1509693981.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:21.706Z,1509693981.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:21.807Z,1509693981.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:22.098Z,1509693982.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:22.146Z,1509693982.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:22.502Z,1509693982.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:22.517Z,1509693982.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:22.893Z,1509693982.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:22.909Z,1509693982.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:23.293Z,1509693983.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:23.315Z,1509693983.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:23.702Z,1509693983.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:23.718Z,1509693983.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:24.104Z,1509693984.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:24.121Z,1509693984.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:24.505Z,1509693984.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:24.521Z,1509693984.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:24.906Z,1509693984.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:24.921Z,1509693984.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:25.292Z,1509693985.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:25.308Z,1509693985.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:25.704Z,1509693985.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:25.721Z,1509693985.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:26.105Z,1509693986.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:26.121Z,1509693986.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:26.505Z,1509693986.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:26.521Z,1509693986.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:26.893Z,1509693986.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:26.907Z,1509693986.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:27.296Z,1509693987.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:27.311Z,1509693987.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:27.704Z,1509693987.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:27.720Z,1509693987.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:28.104Z,1509693988.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:28.123Z,1509693988.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:28.123Z,1509693988.123 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 144
2017-11-03T07:26:28.123Z,1509693988.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:26:28.125Z,1509693988.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:28.125Z,1509693988.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 144
2017-11-03T07:26:28.125Z,1509693988.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:26:28.127Z,1509693988.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:28.127Z,1509693988.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 144
2017-11-03T07:26:28.127Z,1509693988.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:26:28.244Z,1509693988.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:26:28.245Z,1509693988.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:26:28.245Z,1509693988.245 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:26:28.502Z,1509693988.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:28.608Z,1509693988.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:26:28.608Z,1509693988.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 144
2017-11-03T07:26:28.609Z,1509693988.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:26:28.609Z,1509693988.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 144
2017-11-03T07:26:28.609Z,1509693988.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:26:28.610Z,1509693988.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 144
2017-11-03T07:26:28.893Z,1509693988.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:28.910Z,1509693988.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:26:28.911Z,1509693988.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:26:28.911Z,1509693988.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:26:28.911Z,1509693988.911 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:26:28.912Z,1509693988.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:26:28.912Z,1509693988.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:26:28.913Z,1509693988.913 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:26:28.913Z,1509693988.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:26:28.914Z,1509693988.914 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:26:29.284Z,1509693989.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:29.310Z,1509693989.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:29.710Z,1509693989.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:29.726Z,1509693989.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:30.110Z,1509693990.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:30.126Z,1509693990.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:30.506Z,1509693990.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:30.523Z,1509693990.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:30.887Z,1509693990.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:30.917Z,1509693990.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:31.284Z,1509693991.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:31.311Z,1509693991.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:31.705Z,1509693991.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:31.788Z,1509693991.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:32.113Z,1509693992.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:32.130Z,1509693992.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:32.505Z,1509693992.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:32.567Z,1509693992.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:32.888Z,1509693992.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:32.943Z,1509693992.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:33.287Z,1509693993.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:33.319Z,1509693993.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:33.709Z,1509693993.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:33.725Z,1509693993.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:34.109Z,1509693994.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:34.166Z,1509693994.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:34.518Z,1509693994.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:34.533Z,1509693994.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:34.885Z,1509693994.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:34.930Z,1509693994.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:35.284Z,1509693995.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:35.330Z,1509693995.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:35.707Z,1509693995.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:35.786Z,1509693995.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:36.098Z,1509693996.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:36.131Z,1509693996.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:36.498Z,1509693996.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:36.531Z,1509693996.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:36.887Z,1509693996.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:36.925Z,1509693996.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:37.284Z,1509693997.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:37.299Z,1509693997.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:37.697Z,1509693997.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:37.781Z,1509693997.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:38.101Z,1509693998.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:38.116Z,1509693998.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:38.498Z,1509693998.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:38.545Z,1509693998.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:38.895Z,1509693998.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:38.910Z,1509693998.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:39.295Z,1509693999.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:39.310Z,1509693999.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:39.698Z,1509693999.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:39.719Z,1509693999.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:40.097Z,1509694000.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:40.112Z,1509694000.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:40.504Z,1509694000.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:40.535Z,1509694000.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:43.751Z,1509694003.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:43.767Z,1509694003.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:43.901Z,1509694003.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:43.939Z,1509694003.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:44.315Z,1509694004.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:44.331Z,1509694004.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:44.718Z,1509694004.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:44.734Z,1509694004.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:45.115Z,1509694005.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:45.130Z,1509694005.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:45.495Z,1509694005.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:45.567Z,1509694005.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:45.893Z,1509694005.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:45.923Z,1509694005.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:46.341Z,1509694006.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:46.413Z,1509694006.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:46.701Z,1509694006.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:46.736Z,1509694006.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:47.106Z,1509694007.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:47.175Z,1509694007.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:47.506Z,1509694007.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:47.538Z,1509694007.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:47.896Z,1509694007.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:47.937Z,1509694007.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:48.330Z,1509694008.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:48.395Z,1509694008.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:48.710Z,1509694008.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:48.735Z,1509694008.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:49.110Z,1509694009.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:49.139Z,1509694009.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:49.510Z,1509694009.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:49.534Z,1509694009.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:49.903Z,1509694009.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:49.938Z,1509694009.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:50.299Z,1509694010.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:50.314Z,1509694010.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:50.709Z,1509694010.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:50.742Z,1509694010.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:51.109Z,1509694011.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:51.141Z,1509694011.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:51.505Z,1509694011.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:51.519Z,1509694011.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:51.904Z,1509694011.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:51.942Z,1509694011.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:52.295Z,1509694012.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:52.311Z,1509694012.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:52.713Z,1509694012.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:52.739Z,1509694012.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:53.105Z,1509694013.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:53.120Z,1509694013.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:53.509Z,1509694013.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:53.541Z,1509694013.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:53.908Z,1509694013.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:53.940Z,1509694013.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:54.294Z,1509694014.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:54.310Z,1509694014.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:54.709Z,1509694014.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:54.739Z,1509694014.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:55.109Z,1509694015.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:55.138Z,1509694015.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:55.502Z,1509694015.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:55.517Z,1509694015.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:55.904Z,1509694015.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:55.919Z,1509694015.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:56.299Z,1509694016.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:56.314Z,1509694016.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:56.710Z,1509694016.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:56.739Z,1509694016.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:57.101Z,1509694017.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:57.116Z,1509694017.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:57.509Z,1509694017.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:57.538Z,1509694017.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:57.897Z,1509694017.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:57.912Z,1509694017.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:58.295Z,1509694018.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:58.315Z,1509694018.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:58.739Z,1509694018.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:59.167Z,1509694019.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:59.539Z,1509694019.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:26:59.896Z,1509694019.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:26:59.911Z,1509694019.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:00.351Z,1509694020.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:00.392Z,1509694020.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:00.709Z,1509694020.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:00.746Z,1509694020.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:01.124Z,1509694021.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:01.524Z,1509694021.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:01.910Z,1509694021.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:02.376Z,1509694022.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:02.720Z,1509694022.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:03.120Z,1509694023.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:03.517Z,1509694023.517 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:27:03.517Z,1509694023.517 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:27:03.517Z,1509694023.517 [BPC1](ERROR): Communications Fault
2017-11-03T07:27:03.525Z,1509694023.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:03.641Z,1509694023.641 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:27:03.922Z,1509694023.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:04.319Z,1509694024.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:04.726Z,1509694024.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:04.829Z,1509694024.829 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:27:04.829Z,1509694024.829 [BPC1] No Fault, FailCount= 1
2017-11-03T07:27:05.179Z,1509694025.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:05.526Z,1509694025.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:05.920Z,1509694025.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:06.319Z,1509694026.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:06.754Z,1509694026.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:07.130Z,1509694027.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:07.520Z,1509694027.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:07.914Z,1509694027.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:08.322Z,1509694028.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:08.754Z,1509694028.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:09.124Z,1509694029.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:09.518Z,1509694029.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:09.926Z,1509694029.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:10.317Z,1509694030.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:10.726Z,1509694030.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:11.120Z,1509694031.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:11.520Z,1509694031.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:11.919Z,1509694031.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:12.316Z,1509694032.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:12.735Z,1509694032.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:13.126Z,1509694033.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:13.530Z,1509694033.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:13.923Z,1509694033.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:14.375Z,1509694034.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:14.727Z,1509694034.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:15.127Z,1509694035.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:15.528Z,1509694035.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:15.917Z,1509694035.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:16.369Z,1509694036.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:16.725Z,1509694036.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:17.135Z,1509694037.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:17.574Z,1509694037.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:17.918Z,1509694037.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:18.323Z,1509694038.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:18.728Z,1509694038.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:19.174Z,1509694039.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:19.535Z,1509694039.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:19.953Z,1509694039.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:20.317Z,1509694040.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:20.766Z,1509694040.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:21.162Z,1509694041.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:21.531Z,1509694041.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:21.918Z,1509694041.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:22.316Z,1509694042.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:22.735Z,1509694042.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:23.124Z,1509694043.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:23.535Z,1509694043.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:23.934Z,1509694043.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:24.314Z,1509694044.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:24.729Z,1509694044.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:25.129Z,1509694045.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:25.528Z,1509694045.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:25.919Z,1509694045.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:26.317Z,1509694046.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:26.727Z,1509694046.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:27.129Z,1509694047.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:27.534Z,1509694047.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:27.923Z,1509694047.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:28.381Z,1509694048.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:28.729Z,1509694048.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:29.133Z,1509694049.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:29.527Z,1509694049.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:29.919Z,1509694049.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:30.381Z,1509694050.381 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:27:30.381Z,1509694050.381 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T07:27:30.381Z,1509694050.381 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:27:30.385Z,1509694050.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:30.492Z,1509694050.492 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:27:30.734Z,1509694050.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:27:30.735Z,1509694050.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:30.785Z,1509694050.785 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:27:30.904Z,1509694050.904 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:27:31.143Z,1509694051.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:27:31.144Z,1509694051.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:31.532Z,1509694051.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:27:31.533Z,1509694051.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:31.917Z,1509694051.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-03T07:27:31.918Z,1509694051.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:32.335Z,1509694052.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:27:32.336Z,1509694052.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:32.425Z,1509694052.425 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:27:32.425Z,1509694052.425 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T07:27:32.520Z,1509694052.520 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:27:32.521Z,1509694052.521 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:27:32.521Z,1509694052.521 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:27:32.521Z,1509694052.521 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:27:32.730Z,1509694052.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:27:32.731Z,1509694052.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:33.181Z,1509694053.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:27:33.182Z,1509694053.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:33.534Z,1509694053.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:27:33.535Z,1509694053.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:33.941Z,1509694053.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:27:33.942Z,1509694053.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:34.326Z,1509694054.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:27:34.327Z,1509694054.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:34.761Z,1509694054.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:27:34.762Z,1509694054.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:35.166Z,1509694055.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:27:35.167Z,1509694055.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:35.527Z,1509694055.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:27:35.529Z,1509694055.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:35.919Z,1509694055.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T07:27:35.920Z,1509694055.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:36.322Z,1509694056.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:27:36.323Z,1509694056.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:36.639Z,1509694056.639 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:27:36.771Z,1509694056.771 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:27:36.772Z,1509694056.772 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:27:36.772Z,1509694056.772 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:27:36.773Z,1509694056.773 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:27:36.777Z,1509694056.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:27:36.778Z,1509694056.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:37.134Z,1509694057.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:27:37.135Z,1509694057.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:37.529Z,1509694057.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:37.929Z,1509694057.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:38.308Z,1509694058.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:38.735Z,1509694058.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:39.128Z,1509694059.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:39.530Z,1509694059.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:39.907Z,1509694059.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:40.331Z,1509694060.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:40.733Z,1509694060.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:44.094Z,1509694064.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:44.275Z,1509694064.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:44.649Z,1509694064.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:45.051Z,1509694065.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:45.451Z,1509694065.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:45.898Z,1509694065.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:46.256Z,1509694066.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:46.653Z,1509694066.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:47.093Z,1509694067.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:47.449Z,1509694067.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:47.883Z,1509694067.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:48.250Z,1509694068.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:48.683Z,1509694068.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:49.099Z,1509694069.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:49.467Z,1509694069.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:49.860Z,1509694069.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:50.249Z,1509694070.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:50.657Z,1509694070.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:51.047Z,1509694071.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:51.451Z,1509694071.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:51.865Z,1509694071.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:52.260Z,1509694072.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:52.660Z,1509694072.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:53.059Z,1509694073.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:53.451Z,1509694073.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:53.855Z,1509694073.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:54.250Z,1509694074.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:54.659Z,1509694074.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:55.067Z,1509694075.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:55.462Z,1509694075.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:55.859Z,1509694075.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:56.251Z,1509694076.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:56.655Z,1509694076.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:57.102Z,1509694077.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:57.455Z,1509694077.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:57.850Z,1509694077.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:57.867Z,1509694077.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:58.248Z,1509694078.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:58.264Z,1509694078.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:58.646Z,1509694078.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:58.661Z,1509694078.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:59.036Z,1509694079.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:59.051Z,1509694079.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:59.423Z,1509694079.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:59.459Z,1509694079.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:27:59.823Z,1509694079.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:27:59.909Z,1509694079.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:00.226Z,1509694080.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:00.253Z,1509694080.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:00.627Z,1509694080.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:00.679Z,1509694080.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:01.045Z,1509694081.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:01.063Z,1509694081.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:01.446Z,1509694081.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:01.506Z,1509694081.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:01.846Z,1509694081.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:01.861Z,1509694081.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:02.224Z,1509694082.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:02.295Z,1509694082.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:02.625Z,1509694082.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:02.654Z,1509694082.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:03.024Z,1509694083.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:03.071Z,1509694083.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:03.424Z,1509694083.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:03.454Z,1509694083.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:03.846Z,1509694083.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:03.861Z,1509694083.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:04.242Z,1509694084.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:04.263Z,1509694084.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:04.645Z,1509694084.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:04.661Z,1509694084.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:05.023Z,1509694085.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:05.038Z,1509694085.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:05.427Z,1509694085.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:05.461Z,1509694085.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:05.827Z,1509694085.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:05.861Z,1509694085.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:06.225Z,1509694086.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:06.239Z,1509694086.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:06.627Z,1509694086.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:06.661Z,1509694086.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:07.053Z,1509694087.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:07.068Z,1509694087.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:07.437Z,1509694087.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:07.471Z,1509694087.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:07.837Z,1509694087.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:07.871Z,1509694087.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:08.227Z,1509694088.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:08.261Z,1509694088.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:08.620Z,1509694088.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:08.635Z,1509694088.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:09.032Z,1509694089.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:09.067Z,1509694089.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:09.427Z,1509694089.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:09.462Z,1509694089.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:09.837Z,1509694089.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:09.870Z,1509694089.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:10.250Z,1509694090.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:10.265Z,1509694090.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:10.638Z,1509694090.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:10.664Z,1509694090.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:11.053Z,1509694091.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:11.105Z,1509694091.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:11.421Z,1509694091.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:11.435Z,1509694091.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:11.827Z,1509694091.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:11.858Z,1509694091.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:12.227Z,1509694092.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:12.261Z,1509694092.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:12.624Z,1509694092.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:12.659Z,1509694092.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:13.046Z,1509694093.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:13.067Z,1509694093.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:13.459Z,1509694093.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:13.521Z,1509694093.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:13.847Z,1509694093.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:13.871Z,1509694093.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:14.224Z,1509694094.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:14.239Z,1509694094.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:14.625Z,1509694094.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:14.656Z,1509694094.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:15.032Z,1509694095.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:15.087Z,1509694095.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:15.435Z,1509694095.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:15.463Z,1509694095.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:15.847Z,1509694095.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:15.867Z,1509694095.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:16.251Z,1509694096.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:16.307Z,1509694096.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:16.637Z,1509694096.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:16.659Z,1509694096.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:17.034Z,1509694097.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:17.079Z,1509694097.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:17.428Z,1509694097.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:17.482Z,1509694097.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:17.823Z,1509694097.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:17.851Z,1509694097.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:18.231Z,1509694098.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:18.246Z,1509694098.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:18.632Z,1509694098.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:18.647Z,1509694098.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:19.034Z,1509694099.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:19.049Z,1509694099.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:19.445Z,1509694099.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:19.476Z,1509694099.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:19.846Z,1509694099.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:19.878Z,1509694099.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:20.232Z,1509694100.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:20.247Z,1509694100.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:20.632Z,1509694100.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:20.650Z,1509694100.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:21.030Z,1509694101.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:21.051Z,1509694101.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:21.430Z,1509694101.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:21.449Z,1509694101.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:21.845Z,1509694101.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:21.860Z,1509694101.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:22.245Z,1509694102.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:22.278Z,1509694102.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:22.638Z,1509694102.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:22.653Z,1509694102.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:23.039Z,1509694103.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:23.094Z,1509694103.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:23.428Z,1509694103.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:23.443Z,1509694103.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:23.823Z,1509694103.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:23.854Z,1509694103.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:24.234Z,1509694104.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:24.249Z,1509694104.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:24.634Z,1509694104.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:24.649Z,1509694104.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:25.058Z,1509694105.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:25.098Z,1509694105.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:25.446Z,1509694105.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:25.467Z,1509694105.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:25.848Z,1509694105.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:25.871Z,1509694105.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:26.233Z,1509694106.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:26.253Z,1509694106.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:26.636Z,1509694106.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:26.652Z,1509694106.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:27.022Z,1509694107.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:27.048Z,1509694107.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:27.443Z,1509694107.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:27.459Z,1509694107.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:27.846Z,1509694107.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:27.867Z,1509694107.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:28.250Z,1509694108.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:28.265Z,1509694108.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:28.646Z,1509694108.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:28.667Z,1509694108.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:29.034Z,1509694109.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:29.050Z,1509694109.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:29.444Z,1509694109.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:29.510Z,1509694109.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:29.825Z,1509694109.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:28:29.856Z,1509694109.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:30.253Z,1509694110.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:30.694Z,1509694110.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:31.067Z,1509694111.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:31.491Z,1509694111.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:31.906Z,1509694111.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:32.254Z,1509694112.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:32.650Z,1509694112.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:33.058Z,1509694113.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:33.453Z,1509694113.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:33.867Z,1509694113.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:34.264Z,1509694114.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:34.659Z,1509694114.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:35.047Z,1509694115.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:35.451Z,1509694115.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:35.843Z,1509694115.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:36.249Z,1509694116.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:36.647Z,1509694116.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:37.049Z,1509694117.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:37.475Z,1509694117.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:37.877Z,1509694117.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:38.246Z,1509694118.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:38.647Z,1509694118.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:39.093Z,1509694119.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:39.454Z,1509694119.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:39.853Z,1509694119.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:39.856Z,1509694119.856 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T07:28:39.856Z,1509694119.856 [Default:CheckIn:C.Wait] Stopped
2017-11-03T07:28:39.856Z,1509694119.856 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T07:28:39.857Z,1509694119.857 [Default:CheckIn:D] Running Loop=1
2017-11-03T07:28:40.278Z,1509694120.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:40.282Z,1509694120.282 [Default:CheckIn:D] Stopped
2017-11-03T07:28:40.282Z,1509694120.282 [Default:CheckIn:E] Running Loop=1
2017-11-03T07:28:40.706Z,1509694120.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:40.717Z,1509694120.717 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 433.545247 min 
2017-11-03T07:28:40.717Z,1509694120.717 [Default:CheckIn:E] Stopped
2017-11-03T07:28:40.717Z,1509694120.717 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T07:28:40.718Z,1509694120.718 [Default:CheckIn] Stopped
2017-11-03T07:28:40.718Z,1509694120.718 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T07:28:40.718Z,1509694120.718 [Default:CheckIn](INFO): Running loop #43
2017-11-03T07:28:40.718Z,1509694120.718 [Default:CheckIn] Running Loop=43
2017-11-03T07:28:40.718Z,1509694120.718 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T07:28:40.718Z,1509694120.718 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T07:28:41.051Z,1509694121.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:44.319Z,1509694124.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:44.483Z,1509694124.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:44.930Z,1509694124.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:45.282Z,1509694125.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:45.703Z,1509694125.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:46.103Z,1509694126.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:46.483Z,1509694126.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:46.881Z,1509694126.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:47.261Z,1509694127.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:47.685Z,1509694127.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:48.084Z,1509694128.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:48.486Z,1509694128.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:48.879Z,1509694128.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:49.265Z,1509694129.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:49.661Z,1509694129.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:50.091Z,1509694130.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:50.487Z,1509694130.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:50.909Z,1509694130.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:51.259Z,1509694131.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:51.682Z,1509694131.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:52.057Z,1509694132.057 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-03T07:28:52.089Z,1509694132.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:52.459Z,1509694132.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:52.889Z,1509694132.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:53.290Z,1509694133.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:53.690Z,1509694133.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:54.063Z,1509694134.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:54.467Z,1509694134.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:54.890Z,1509694134.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:55.253Z,1509694135.253 [PNI_TCM](ERROR): CRC does not match. Expected:0x36605 got:0x16716
2017-11-03T07:28:55.320Z,1509694135.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:55.675Z,1509694135.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:56.092Z,1509694136.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:56.470Z,1509694136.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:56.893Z,1509694136.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:57.346Z,1509694137.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:57.671Z,1509694137.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:58.154Z,1509694138.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:58.455Z,1509694138.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x40058 got:0x19554
2017-11-03T07:28:58.496Z,1509694138.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:58.914Z,1509694138.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:59.272Z,1509694139.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:28:59.706Z,1509694139.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:00.068Z,1509694140.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:00.498Z,1509694140.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:00.869Z,1509694140.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:01.267Z,1509694141.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:01.671Z,1509694141.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:02.073Z,1509694142.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:02.471Z,1509694142.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:02.876Z,1509694142.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:03.263Z,1509694143.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:03.669Z,1509694143.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:04.065Z,1509694144.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:04.491Z,1509694144.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:04.867Z,1509694144.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x12274 got:0x19587
2017-11-03T07:29:04.906Z,1509694144.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:05.270Z,1509694145.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:05.668Z,1509694145.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:06.067Z,1509694146.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:06.467Z,1509694146.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:06.862Z,1509694146.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:07.270Z,1509694147.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:07.668Z,1509694147.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:08.071Z,1509694148.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:08.494Z,1509694148.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:08.873Z,1509694148.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:09.328Z,1509694149.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:09.673Z,1509694149.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:10.079Z,1509694150.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:10.465Z,1509694150.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:10.879Z,1509694150.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:11.332Z,1509694151.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:11.672Z,1509694151.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:12.066Z,1509694152.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:12.527Z,1509694152.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:12.873Z,1509694152.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:13.306Z,1509694153.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:13.669Z,1509694153.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:14.107Z,1509694154.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:14.510Z,1509694154.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:14.881Z,1509694154.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:15.267Z,1509694155.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:15.668Z,1509694155.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:16.072Z,1509694156.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:16.469Z,1509694156.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:16.881Z,1509694156.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:17.280Z,1509694157.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:17.675Z,1509694157.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:18.070Z,1509694158.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:18.467Z,1509694158.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:18.914Z,1509694158.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:19.269Z,1509694159.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:19.669Z,1509694159.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:20.083Z,1509694160.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:20.479Z,1509694160.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:20.887Z,1509694160.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:21.263Z,1509694161.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:21.670Z,1509694161.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:22.082Z,1509694162.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:22.468Z,1509694162.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:22.875Z,1509694162.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:23.361Z,1509694163.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:23.679Z,1509694163.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:24.073Z,1509694164.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:24.474Z,1509694164.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:24.873Z,1509694164.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:25.327Z,1509694165.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:25.658Z,1509694165.658 [PNI_TCM](ERROR): CRC does not match. Expected:0x48046 got:0x57578
2017-11-03T07:29:25.695Z,1509694165.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:26.083Z,1509694166.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:26.543Z,1509694166.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:26.872Z,1509694166.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:27.266Z,1509694167.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:27.707Z,1509694167.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:28.067Z,1509694168.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:28.506Z,1509694168.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:28.907Z,1509694168.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:29.291Z,1509694169.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:29.291Z,1509694169.291 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 145
2017-11-03T07:29:29.291Z,1509694169.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:29:29.293Z,1509694169.293 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:29.293Z,1509694169.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 145
2017-11-03T07:29:29.293Z,1509694169.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:29:29.295Z,1509694169.295 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:29.295Z,1509694169.295 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 145
2017-11-03T07:29:29.295Z,1509694169.295 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:29:29.389Z,1509694169.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:29:29.389Z,1509694169.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:29:29.389Z,1509694169.389 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:29:29.756Z,1509694169.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:29:29.757Z,1509694169.757 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 145
2017-11-03T07:29:29.757Z,1509694169.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:29:29.757Z,1509694169.757 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 145
2017-11-03T07:29:29.758Z,1509694169.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:29:29.758Z,1509694169.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 145
2017-11-03T07:29:30.067Z,1509694170.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:29:30.067Z,1509694170.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:29:30.067Z,1509694170.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:29:30.068Z,1509694170.068 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:29:30.069Z,1509694170.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:29:30.069Z,1509694170.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:29:30.069Z,1509694170.069 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:29:30.070Z,1509694170.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:29:30.070Z,1509694170.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:29:30.473Z,1509694170.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:30.874Z,1509694170.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:31.268Z,1509694171.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:31.674Z,1509694171.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:32.076Z,1509694172.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:32.477Z,1509694172.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:32.892Z,1509694172.892 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:29:32.892Z,1509694172.892 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T07:29:32.893Z,1509694172.893 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:29:32.921Z,1509694172.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:29:32.922Z,1509694172.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:33.016Z,1509694173.016 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:29:33.271Z,1509694173.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:29:33.272Z,1509694173.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:33.297Z,1509694173.297 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:29:33.444Z,1509694173.444 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:29:33.670Z,1509694173.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:29:33.671Z,1509694173.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:34.069Z,1509694174.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:29:34.070Z,1509694174.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:34.464Z,1509694174.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:29:34.465Z,1509694174.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:34.871Z,1509694174.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:29:34.872Z,1509694174.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:34.969Z,1509694174.969 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:29:34.969Z,1509694174.969 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T07:29:35.061Z,1509694175.061 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:29:35.061Z,1509694175.061 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:29:35.061Z,1509694175.061 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:29:35.061Z,1509694175.061 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:29:35.270Z,1509694175.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:29:35.271Z,1509694175.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:35.674Z,1509694175.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:29:35.675Z,1509694175.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:36.064Z,1509694176.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:29:36.065Z,1509694176.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:36.467Z,1509694176.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:29:36.468Z,1509694176.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:36.866Z,1509694176.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:29:36.867Z,1509694176.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:37.267Z,1509694177.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:29:37.268Z,1509694177.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:37.663Z,1509694177.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:29:37.664Z,1509694177.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:38.093Z,1509694178.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:29:38.094Z,1509694178.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:38.491Z,1509694178.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:29:38.492Z,1509694178.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:38.895Z,1509694178.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:29:38.895Z,1509694178.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:39.181Z,1509694179.181 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:29:39.297Z,1509694179.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:29:39.298Z,1509694179.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:39.311Z,1509694179.311 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:29:39.313Z,1509694179.313 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:29:39.313Z,1509694179.313 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:29:39.314Z,1509694179.314 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:29:39.685Z,1509694179.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:29:39.686Z,1509694179.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:40.083Z,1509694180.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:40.477Z,1509694180.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:40.934Z,1509694180.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:41.270Z,1509694181.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:41.328Z,1509694181.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:44.423Z,1509694184.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:44.443Z,1509694184.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:44.591Z,1509694184.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:44.647Z,1509694184.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:44.992Z,1509694184.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:45.007Z,1509694185.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:45.392Z,1509694185.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:45.439Z,1509694185.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:45.803Z,1509694185.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:45.835Z,1509694185.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:46.235Z,1509694186.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:46.338Z,1509694186.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:46.598Z,1509694186.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:46.629Z,1509694186.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:46.988Z,1509694186.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:47.003Z,1509694187.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:47.403Z,1509694187.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:47.805Z,1509694187.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:48.205Z,1509694188.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:48.604Z,1509694188.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:49.005Z,1509694189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:49.430Z,1509694189.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:49.831Z,1509694189.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:50.204Z,1509694190.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:50.604Z,1509694190.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:51.003Z,1509694191.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:51.404Z,1509694191.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:51.829Z,1509694191.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:52.230Z,1509694192.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:52.608Z,1509694192.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:53.007Z,1509694193.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:53.402Z,1509694193.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:53.802Z,1509694193.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:54.204Z,1509694194.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:54.610Z,1509694194.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:55.043Z,1509694195.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:55.433Z,1509694195.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:55.802Z,1509694195.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:55.837Z,1509694195.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:56.188Z,1509694196.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:56.204Z,1509694196.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:56.588Z,1509694196.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:56.603Z,1509694196.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:56.996Z,1509694196.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:57.038Z,1509694197.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:57.388Z,1509694197.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:57.404Z,1509694197.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:57.802Z,1509694197.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:57.835Z,1509694197.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:58.201Z,1509694198.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:58.254Z,1509694198.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:58.602Z,1509694198.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:58.659Z,1509694198.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:59.024Z,1509694199.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:29:59.081Z,1509694199.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:59.395Z,1509694199.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:29:59.815Z,1509694199.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:00.239Z,1509694200.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:00.599Z,1509694200.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:01.060Z,1509694201.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:01.427Z,1509694201.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:01.860Z,1509694201.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:02.199Z,1509694202.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:02.599Z,1509694202.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:02.998Z,1509694202.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:03.409Z,1509694203.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:03.827Z,1509694203.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:04.227Z,1509694204.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:04.625Z,1509694204.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:05.026Z,1509694205.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:05.398Z,1509694205.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:05.799Z,1509694205.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:06.207Z,1509694206.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:06.601Z,1509694206.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:07.023Z,1509694207.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:07.428Z,1509694207.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:07.828Z,1509694207.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:08.199Z,1509694208.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:08.599Z,1509694208.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:09.028Z,1509694209.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:09.400Z,1509694209.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:09.828Z,1509694209.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:10.227Z,1509694210.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:10.625Z,1509694210.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:11.026Z,1509694211.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:11.403Z,1509694211.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:11.803Z,1509694211.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:12.203Z,1509694212.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:12.601Z,1509694212.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:13.091Z,1509694213.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:13.416Z,1509694213.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:13.895Z,1509694213.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:14.204Z,1509694214.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:14.603Z,1509694214.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:15.051Z,1509694215.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:15.411Z,1509694215.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:15.854Z,1509694215.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:16.251Z,1509694216.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:16.613Z,1509694216.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:17.007Z,1509694217.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:17.438Z,1509694217.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:17.808Z,1509694217.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:18.207Z,1509694218.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:18.608Z,1509694218.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:19.015Z,1509694219.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:19.413Z,1509694219.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:19.813Z,1509694219.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:20.211Z,1509694220.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:20.611Z,1509694220.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:21.010Z,1509694221.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:21.415Z,1509694221.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:21.819Z,1509694221.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:22.215Z,1509694222.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:22.619Z,1509694222.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:23.006Z,1509694223.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:23.415Z,1509694223.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:23.811Z,1509694223.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:24.208Z,1509694224.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:24.596Z,1509694224.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:24.618Z,1509694224.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:25.000Z,1509694225.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:25.015Z,1509694225.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:25.400Z,1509694225.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:25.415Z,1509694225.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:25.801Z,1509694225.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:25.822Z,1509694225.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:26.192Z,1509694226.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:26.208Z,1509694226.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:26.595Z,1509694226.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:26.611Z,1509694226.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:27.037Z,1509694227.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:27.069Z,1509694227.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:27.395Z,1509694227.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:27.411Z,1509694227.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:27.805Z,1509694227.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:27.893Z,1509694227.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:28.226Z,1509694228.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:28.623Z,1509694228.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:29.046Z,1509694229.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:29.383Z,1509694229.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:29.418Z,1509694229.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:29.780Z,1509694229.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:29.844Z,1509694229.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:30.193Z,1509694230.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:30.254Z,1509694230.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:30.596Z,1509694230.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:30.612Z,1509694230.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:31.007Z,1509694231.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:31.022Z,1509694231.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:31.410Z,1509694231.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:31.425Z,1509694231.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:31.806Z,1509694231.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:31.871Z,1509694231.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:32.195Z,1509694232.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:32.211Z,1509694232.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:32.592Z,1509694232.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:30:32.611Z,1509694232.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:33.018Z,1509694233.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:33.408Z,1509694233.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:33.819Z,1509694233.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:34.222Z,1509694234.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:34.623Z,1509694234.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:35.007Z,1509694235.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:35.411Z,1509694235.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:35.807Z,1509694235.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:36.209Z,1509694236.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:36.610Z,1509694236.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:37.020Z,1509694237.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:37.427Z,1509694237.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:37.821Z,1509694237.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:38.211Z,1509694238.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:38.619Z,1509694238.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:39.009Z,1509694239.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:39.409Z,1509694239.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:39.820Z,1509694239.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:40.230Z,1509694240.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:40.620Z,1509694240.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:41.084Z,1509694241.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:41.413Z,1509694241.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:44.798Z,1509694244.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:44.965Z,1509694244.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:45.435Z,1509694245.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:45.771Z,1509694245.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:46.194Z,1509694246.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:46.571Z,1509694246.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:46.963Z,1509694246.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:47.357Z,1509694247.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:47.772Z,1509694247.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:48.171Z,1509694248.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:48.564Z,1509694248.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:48.971Z,1509694248.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:49.364Z,1509694249.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:49.761Z,1509694249.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:50.168Z,1509694250.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:50.561Z,1509694250.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:50.979Z,1509694250.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:51.368Z,1509694251.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:51.765Z,1509694251.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:52.159Z,1509694252.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:52.565Z,1509694252.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:52.975Z,1509694252.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:53.355Z,1509694253.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:53.769Z,1509694253.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:54.175Z,1509694254.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:54.568Z,1509694254.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:54.946Z,1509694254.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:55.353Z,1509694255.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:55.751Z,1509694255.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:56.156Z,1509694256.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:56.559Z,1509694256.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:56.971Z,1509694256.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:57.402Z,1509694257.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:57.764Z,1509694257.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:58.199Z,1509694258.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:58.635Z,1509694258.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:58.950Z,1509694258.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:59.419Z,1509694259.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:30:59.783Z,1509694259.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:00.219Z,1509694260.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:00.583Z,1509694260.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:01.019Z,1509694261.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:01.377Z,1509694261.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:01.782Z,1509694261.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:02.169Z,1509694262.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:02.602Z,1509694262.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:02.999Z,1509694262.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:03.359Z,1509694263.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:03.790Z,1509694263.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:04.163Z,1509694264.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:04.563Z,1509694264.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:04.955Z,1509694264.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:05.367Z,1509694265.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:05.775Z,1509694265.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:06.167Z,1509694266.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:06.653Z,1509694266.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:06.969Z,1509694266.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:07.377Z,1509694267.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:07.783Z,1509694267.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:08.176Z,1509694268.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:08.569Z,1509694268.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:09.051Z,1509694269.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:09.382Z,1509694269.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:09.789Z,1509694269.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:10.156Z,1509694270.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:10.587Z,1509694270.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:10.963Z,1509694270.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:11.387Z,1509694271.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:11.710Z,1509694271.710 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T07:31:11.710Z,1509694271.710 [NAL9602] Data Fault, FailCount= 5
2017-11-03T07:31:11.710Z,1509694271.710 [NAL9602](ERROR): Data Fault
2017-11-03T07:31:11.791Z,1509694271.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:11.869Z,1509694271.869 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T07:31:11.869Z,1509694271.869 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T07:31:12.110Z,1509694272.110 [NAL9602](INFO): Powering down
2017-11-03T07:31:12.159Z,1509694272.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:12.259Z,1509694272.259 [CBIT](INFO): Critical error at 20171103T073111
2017-11-03T07:31:12.651Z,1509694272.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:12.996Z,1509694272.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:13.364Z,1509694273.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:13.798Z,1509694273.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:14.169Z,1509694274.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:14.605Z,1509694274.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:15.014Z,1509694275.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:15.361Z,1509694275.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:15.755Z,1509694275.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:16.155Z,1509694276.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:16.555Z,1509694276.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:16.955Z,1509694276.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:17.357Z,1509694277.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:17.773Z,1509694277.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:18.150Z,1509694278.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:18.557Z,1509694278.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:18.959Z,1509694278.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:19.353Z,1509694279.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:19.757Z,1509694279.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:20.155Z,1509694280.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:20.553Z,1509694280.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:20.959Z,1509694280.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:21.358Z,1509694281.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:21.755Z,1509694281.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:22.155Z,1509694282.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:22.558Z,1509694282.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:22.958Z,1509694282.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:23.365Z,1509694283.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:23.743Z,1509694283.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:24.161Z,1509694284.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:24.554Z,1509694284.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:24.966Z,1509694284.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:25.385Z,1509694285.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:25.755Z,1509694285.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:26.146Z,1509694286.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:26.565Z,1509694286.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:27.002Z,1509694287.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:27.387Z,1509694287.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:27.747Z,1509694287.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:28.182Z,1509694288.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:28.547Z,1509694288.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:28.979Z,1509694288.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:29.391Z,1509694289.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:29.746Z,1509694289.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:30.146Z,1509694290.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:30.546Z,1509694290.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:30.952Z,1509694290.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:31.346Z,1509694291.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:31.745Z,1509694291.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:32.145Z,1509694292.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:32.545Z,1509694292.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:32.951Z,1509694292.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:33.347Z,1509694293.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:33.746Z,1509694293.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:34.146Z,1509694294.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:34.546Z,1509694294.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:34.951Z,1509694294.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:35.184Z,1509694295.184 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:31:35.184Z,1509694295.184 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T07:31:35.184Z,1509694295.184 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:31:35.350Z,1509694295.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:31:35.351Z,1509694295.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:35.457Z,1509694295.457 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:31:35.588Z,1509694295.588 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:31:35.680Z,1509694295.680 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:31:35.755Z,1509694295.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:31:35.757Z,1509694295.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:36.146Z,1509694296.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:31:36.147Z,1509694296.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:36.550Z,1509694296.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:31:36.551Z,1509694296.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:36.946Z,1509694296.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:31:36.947Z,1509694296.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:37.041Z,1509694297.041 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:31:37.041Z,1509694297.041 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T07:31:37.301Z,1509694297.301 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:31:37.301Z,1509694297.301 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:31:37.301Z,1509694297.301 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:31:37.302Z,1509694297.302 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:31:37.372Z,1509694297.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:31:37.377Z,1509694297.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:37.751Z,1509694297.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:31:37.752Z,1509694297.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:38.150Z,1509694298.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:31:38.151Z,1509694298.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:38.551Z,1509694298.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:31:38.552Z,1509694298.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:38.951Z,1509694298.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:31:38.952Z,1509694298.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:39.353Z,1509694299.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:31:39.354Z,1509694299.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:39.752Z,1509694299.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:31:39.753Z,1509694299.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:40.151Z,1509694300.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:31:40.152Z,1509694300.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:40.551Z,1509694300.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:31:40.552Z,1509694300.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:40.952Z,1509694300.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:31:40.953Z,1509694300.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:41.483Z,1509694301.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T07:31:41.484Z,1509694301.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:41.554Z,1509694301.554 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:31:41.642Z,1509694301.642 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:31:41.643Z,1509694301.643 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:31:41.644Z,1509694301.644 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:31:41.645Z,1509694301.645 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:31:41.787Z,1509694301.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:31:41.788Z,1509694301.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:45.114Z,1509694305.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:45.282Z,1509694305.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:45.773Z,1509694305.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:46.115Z,1509694306.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:46.475Z,1509694306.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:46.890Z,1509694306.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:47.275Z,1509694307.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:47.735Z,1509694307.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:48.068Z,1509694308.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:48.494Z,1509694308.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:48.875Z,1509694308.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:49.302Z,1509694309.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:49.675Z,1509694309.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:50.080Z,1509694310.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:50.479Z,1509694310.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:50.877Z,1509694310.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:51.279Z,1509694311.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:51.675Z,1509694311.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:52.088Z,1509694312.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:52.484Z,1509694312.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:52.885Z,1509694312.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:53.286Z,1509694313.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:53.663Z,1509694313.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:54.084Z,1509694314.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:54.484Z,1509694314.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:54.884Z,1509694314.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:54.974Z,1509694314.974 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T07:31:55.286Z,1509694315.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:55.667Z,1509694315.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:56.099Z,1509694316.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:56.490Z,1509694316.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:56.893Z,1509694316.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:57.289Z,1509694317.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:57.693Z,1509694317.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:58.115Z,1509694318.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:58.474Z,1509694318.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:58.915Z,1509694318.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:59.269Z,1509694319.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:31:59.711Z,1509694319.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:00.107Z,1509694320.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:00.493Z,1509694320.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:00.875Z,1509694320.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:01.255Z,1509694321.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:01.269Z,1509694321.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:01.655Z,1509694321.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:01.670Z,1509694321.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:02.071Z,1509694322.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:02.107Z,1509694322.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:02.462Z,1509694322.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:02.479Z,1509694322.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:02.859Z,1509694322.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:02.879Z,1509694322.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:03.259Z,1509694323.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:03.274Z,1509694323.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:03.656Z,1509694323.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:03.676Z,1509694323.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:04.050Z,1509694324.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:04.073Z,1509694324.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:04.459Z,1509694324.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:04.478Z,1509694324.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:04.860Z,1509694324.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:04.875Z,1509694324.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:05.266Z,1509694325.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:05.281Z,1509694325.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:05.663Z,1509694325.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:05.678Z,1509694325.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:06.051Z,1509694326.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:06.076Z,1509694326.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:06.451Z,1509694326.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:06.477Z,1509694326.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:06.864Z,1509694326.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:06.886Z,1509694326.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:07.250Z,1509694327.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:07.275Z,1509694327.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:07.661Z,1509694327.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:07.683Z,1509694327.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:08.050Z,1509694328.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:08.076Z,1509694328.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:08.463Z,1509694328.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:08.478Z,1509694328.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:08.863Z,1509694328.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:08.879Z,1509694328.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:09.261Z,1509694329.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:09.282Z,1509694329.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:09.652Z,1509694329.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:09.678Z,1509694329.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:10.081Z,1509694330.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:10.096Z,1509694330.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:10.466Z,1509694330.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:10.481Z,1509694330.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:10.862Z,1509694330.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:10.882Z,1509694330.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:11.264Z,1509694331.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:11.287Z,1509694331.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:11.665Z,1509694331.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:11.681Z,1509694331.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:12.066Z,1509694332.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:12.099Z,1509694332.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:12.451Z,1509694332.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:12.503Z,1509694332.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:12.852Z,1509694332.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:12.883Z,1509694332.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:13.250Z,1509694333.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:13.282Z,1509694333.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:13.657Z,1509694333.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:13.728Z,1509694333.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:14.052Z,1509694334.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:14.083Z,1509694334.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:14.450Z,1509694334.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:14.502Z,1509694334.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:14.857Z,1509694334.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:14.929Z,1509694334.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:15.255Z,1509694335.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:15.280Z,1509694335.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:15.652Z,1509694335.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:15.683Z,1509694335.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:16.055Z,1509694336.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:16.070Z,1509694336.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:16.454Z,1509694336.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:16.498Z,1509694336.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:16.854Z,1509694336.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:16.861Z,1509694336.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x54956 got:0x1857
2017-11-03T07:32:16.895Z,1509694336.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:17.255Z,1509694337.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:17.270Z,1509694337.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:17.654Z,1509694337.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:17.669Z,1509694337.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:18.055Z,1509694338.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:18.082Z,1509694338.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:18.458Z,1509694338.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:18.473Z,1509694338.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:18.859Z,1509694338.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:18.874Z,1509694338.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:19.260Z,1509694339.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:19.275Z,1509694339.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:19.658Z,1509694339.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:19.677Z,1509694339.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:20.061Z,1509694340.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:20.076Z,1509694340.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:20.462Z,1509694340.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:20.483Z,1509694340.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:20.851Z,1509694340.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:20.877Z,1509694340.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:21.261Z,1509694341.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:21.277Z,1509694341.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:21.664Z,1509694341.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:21.679Z,1509694341.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:22.065Z,1509694342.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:22.081Z,1509694342.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:22.452Z,1509694342.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:22.477Z,1509694342.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:22.862Z,1509694342.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:22.878Z,1509694342.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:23.264Z,1509694343.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:23.279Z,1509694343.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:23.661Z,1509694343.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:23.682Z,1509694343.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:24.078Z,1509694344.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:24.094Z,1509694344.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:24.467Z,1509694344.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:24.482Z,1509694344.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:24.861Z,1509694344.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:24.876Z,1509694344.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:25.262Z,1509694345.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:25.277Z,1509694345.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:25.649Z,1509694345.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:25.675Z,1509694345.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:26.065Z,1509694346.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:26.081Z,1509694346.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:26.461Z,1509694346.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:26.481Z,1509694346.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:26.861Z,1509694346.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:26.919Z,1509694346.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:27.252Z,1509694347.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:27.303Z,1509694347.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:27.662Z,1509694347.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:27.677Z,1509694347.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:28.050Z,1509694348.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:28.114Z,1509694348.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:28.451Z,1509694348.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:28.476Z,1509694348.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:28.852Z,1509694348.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:28.917Z,1509694348.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:29.252Z,1509694349.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:29.317Z,1509694349.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:29.663Z,1509694349.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:29.682Z,1509694349.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:30.062Z,1509694350.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:30.088Z,1509694350.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:30.088Z,1509694350.088 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 146
2017-11-03T07:32:30.088Z,1509694350.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:32:30.090Z,1509694350.090 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:30.090Z,1509694350.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 146
2017-11-03T07:32:30.090Z,1509694350.090 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:32:30.092Z,1509694350.092 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:30.092Z,1509694350.092 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 146
2017-11-03T07:32:30.092Z,1509694350.092 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:32:30.181Z,1509694350.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:32:30.181Z,1509694350.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:32:30.181Z,1509694350.181 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:32:30.455Z,1509694350.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:30.560Z,1509694350.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:32:30.561Z,1509694350.561 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 146
2017-11-03T07:32:30.561Z,1509694350.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:32:30.561Z,1509694350.561 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 146
2017-11-03T07:32:30.562Z,1509694350.562 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:32:30.562Z,1509694350.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 146
2017-11-03T07:32:30.860Z,1509694350.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:30.890Z,1509694350.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:32:30.890Z,1509694350.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:32:30.891Z,1509694350.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:32:30.891Z,1509694350.891 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:32:30.891Z,1509694350.891 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:32:30.892Z,1509694350.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:32:30.892Z,1509694350.892 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:32:30.893Z,1509694350.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:32:30.893Z,1509694350.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:32:31.295Z,1509694351.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:31.671Z,1509694351.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:32.073Z,1509694352.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:32.482Z,1509694352.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:32.879Z,1509694352.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:33.278Z,1509694353.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:33.675Z,1509694353.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:34.079Z,1509694354.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:34.481Z,1509694354.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:34.881Z,1509694354.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:35.279Z,1509694355.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:35.681Z,1509694355.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:36.086Z,1509694356.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:36.479Z,1509694356.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:36.881Z,1509694356.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:37.282Z,1509694357.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:37.680Z,1509694357.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:38.095Z,1509694358.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:38.486Z,1509694358.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:38.877Z,1509694358.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:39.288Z,1509694359.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:39.653Z,1509694359.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:39.680Z,1509694359.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:40.055Z,1509694360.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:40.082Z,1509694360.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:40.457Z,1509694360.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:40.486Z,1509694360.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:40.855Z,1509694360.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:40.926Z,1509694360.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:41.254Z,1509694361.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:41.307Z,1509694361.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:41.652Z,1509694361.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:41.707Z,1509694361.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:42.054Z,1509694362.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:42.085Z,1509694362.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:45.243Z,1509694365.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:45.303Z,1509694365.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:45.411Z,1509694365.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:45.441Z,1509694365.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:45.831Z,1509694365.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:45.883Z,1509694365.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:46.215Z,1509694366.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:46.276Z,1509694366.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:46.614Z,1509694366.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:46.646Z,1509694366.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:47.013Z,1509694367.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:47.041Z,1509694367.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:47.411Z,1509694367.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:47.437Z,1509694367.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:47.829Z,1509694367.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:47.884Z,1509694367.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:48.214Z,1509694368.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:48.241Z,1509694368.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:48.626Z,1509694368.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:48.641Z,1509694368.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:49.013Z,1509694369.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:49.039Z,1509694369.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:49.415Z,1509694369.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:49.441Z,1509694369.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:49.858Z,1509694369.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:49.895Z,1509694369.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:50.213Z,1509694370.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:50.249Z,1509694370.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:50.608Z,1509694370.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:50.631Z,1509694370.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:51.008Z,1509694371.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:51.023Z,1509694371.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:51.407Z,1509694371.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:51.423Z,1509694371.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:51.814Z,1509694371.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:51.845Z,1509694371.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:52.226Z,1509694372.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:52.255Z,1509694372.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:52.614Z,1509694372.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:52.653Z,1509694372.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:53.010Z,1509694373.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:53.025Z,1509694373.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:53.415Z,1509694373.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:53.454Z,1509694373.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:53.812Z,1509694373.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:53.827Z,1509694373.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:54.214Z,1509694374.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:54.284Z,1509694374.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:54.622Z,1509694374.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:54.637Z,1509694374.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:55.022Z,1509694375.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:55.037Z,1509694375.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:55.421Z,1509694375.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:55.436Z,1509694375.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:55.820Z,1509694375.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:55.835Z,1509694375.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:56.219Z,1509694376.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:56.234Z,1509694376.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:56.629Z,1509694376.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:56.644Z,1509694376.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:57.008Z,1509694377.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:57.035Z,1509694377.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:57.412Z,1509694377.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:57.443Z,1509694377.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:57.820Z,1509694377.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:57.843Z,1509694377.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:58.208Z,1509694378.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:58.247Z,1509694378.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:58.612Z,1509694378.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:58.652Z,1509694378.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:59.012Z,1509694379.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:59.027Z,1509694379.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:59.411Z,1509694379.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:59.426Z,1509694379.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:32:59.830Z,1509694379.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:32:59.894Z,1509694379.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:00.219Z,1509694380.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:00.253Z,1509694380.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:00.611Z,1509694380.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:00.667Z,1509694380.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:01.015Z,1509694381.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:01.063Z,1509694381.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:01.412Z,1509694381.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:01.426Z,1509694381.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:01.826Z,1509694381.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:01.857Z,1509694381.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:02.216Z,1509694382.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:02.230Z,1509694382.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:02.612Z,1509694382.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:02.626Z,1509694382.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:03.013Z,1509694383.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:03.028Z,1509694383.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:03.412Z,1509694383.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:03.426Z,1509694383.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:03.855Z,1509694383.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:03.906Z,1509694383.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:04.218Z,1509694384.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:04.233Z,1509694384.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:04.620Z,1509694384.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:04.639Z,1509694384.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:05.011Z,1509694385.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:05.026Z,1509694385.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:05.412Z,1509694385.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:05.427Z,1509694385.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:05.819Z,1509694385.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:05.833Z,1509694385.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:06.215Z,1509694386.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:06.230Z,1509694386.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:06.611Z,1509694386.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:06.627Z,1509694386.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:07.015Z,1509694387.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:07.031Z,1509694387.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:07.411Z,1509694387.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:07.427Z,1509694387.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:07.815Z,1509694387.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:07.831Z,1509694387.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:08.215Z,1509694388.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:08.235Z,1509694388.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:08.621Z,1509694388.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:08.637Z,1509694388.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:09.012Z,1509694389.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:09.077Z,1509694389.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:09.421Z,1509694389.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:09.436Z,1509694389.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:09.821Z,1509694389.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:09.836Z,1509694389.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:10.222Z,1509694390.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:10.243Z,1509694390.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:10.610Z,1509694390.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:10.641Z,1509694390.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:11.014Z,1509694391.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:11.039Z,1509694391.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:11.412Z,1509694391.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:11.441Z,1509694391.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:11.814Z,1509694391.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:11.843Z,1509694391.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:11.948Z,1509694391.948 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T07:33:11.948Z,1509694391.948 [NAL9602] No Fault, FailCount= 5
2017-11-03T07:33:12.196Z,1509694392.196 [NAL9602](INFO): Powering up NAL9602
2017-11-03T07:33:12.214Z,1509694392.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:12.244Z,1509694392.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:12.615Z,1509694392.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:12.640Z,1509694392.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:13.013Z,1509694393.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:13.095Z,1509694393.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:13.406Z,1509694393.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:13.421Z,1509694393.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:13.821Z,1509694393.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:13.890Z,1509694393.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:14.212Z,1509694394.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:14.239Z,1509694394.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:14.608Z,1509694394.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:14.650Z,1509694394.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:15.013Z,1509694395.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:15.070Z,1509694395.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:15.412Z,1509694395.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:15.449Z,1509694395.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:15.825Z,1509694395.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:15.859Z,1509694395.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:16.213Z,1509694396.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:16.250Z,1509694396.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:16.613Z,1509694396.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:16.628Z,1509694396.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:17.013Z,1509694397.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:17.027Z,1509694397.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:17.415Z,1509694397.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:17.447Z,1509694397.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:17.842Z,1509694397.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:17.910Z,1509694397.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:18.222Z,1509694398.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:18.238Z,1509694398.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:18.621Z,1509694398.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:18.635Z,1509694398.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:19.022Z,1509694399.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:19.043Z,1509694399.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:19.422Z,1509694399.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:19.436Z,1509694399.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:19.822Z,1509694399.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:19.843Z,1509694399.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:20.217Z,1509694400.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:20.238Z,1509694400.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:20.608Z,1509694400.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:20.633Z,1509694400.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:21.021Z,1509694401.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:21.035Z,1509694401.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:21.422Z,1509694401.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:21.443Z,1509694401.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:21.817Z,1509694401.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:21.832Z,1509694401.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:22.221Z,1509694402.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:22.236Z,1509694402.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:22.611Z,1509694402.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:22.637Z,1509694402.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:23.036Z,1509694403.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:23.059Z,1509694403.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:23.398Z,1509694403.398 [NAL9602](INFO): NAL9602 initialized
2017-11-03T07:33:23.424Z,1509694403.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:23.445Z,1509694403.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:23.821Z,1509694403.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:23.843Z,1509694403.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:24.230Z,1509694404.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:24.277Z,1509694404.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:24.633Z,1509694404.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:24.648Z,1509694404.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:25.034Z,1509694405.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:25.049Z,1509694405.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:25.411Z,1509694405.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:25.443Z,1509694405.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:25.824Z,1509694405.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:25.856Z,1509694405.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:26.215Z,1509694406.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:26.246Z,1509694406.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:26.614Z,1509694406.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:26.651Z,1509694406.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:27.030Z,1509694407.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:27.083Z,1509694407.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:27.429Z,1509694407.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:27.483Z,1509694407.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:27.837Z,1509694407.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:27.870Z,1509694407.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:28.216Z,1509694408.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:28.274Z,1509694408.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:28.616Z,1509694408.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:28.632Z,1509694408.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:29.017Z,1509694409.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:29.082Z,1509694409.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:29.416Z,1509694409.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:29.467Z,1509694409.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:29.855Z,1509694409.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:29.875Z,1509694409.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:30.230Z,1509694410.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:30.261Z,1509694410.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:30.629Z,1509694410.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:30.664Z,1509694410.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:31.016Z,1509694411.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:31.032Z,1509694411.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:31.416Z,1509694411.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:31.431Z,1509694411.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:31.854Z,1509694411.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:31.875Z,1509694411.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:32.221Z,1509694412.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:32.236Z,1509694412.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:32.618Z,1509694412.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:32.634Z,1509694412.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:33.033Z,1509694413.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:33.063Z,1509694413.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:33.433Z,1509694413.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:33.461Z,1509694413.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:33.822Z,1509694413.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:33.837Z,1509694413.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:34.218Z,1509694414.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:34.233Z,1509694414.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:34.621Z,1509694414.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:34.635Z,1509694414.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:35.017Z,1509694415.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:35.032Z,1509694415.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:35.420Z,1509694415.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:35.442Z,1509694415.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:35.833Z,1509694415.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:35.864Z,1509694415.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:36.222Z,1509694416.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:36.237Z,1509694416.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:36.628Z,1509694416.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:36.643Z,1509694416.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:37.022Z,1509694417.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:37.038Z,1509694417.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:37.421Z,1509694417.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:37.442Z,1509694417.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:37.823Z,1509694417.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:37.843Z,1509694417.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:37.940Z,1509694417.940 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:33:37.940Z,1509694417.940 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T07:33:37.940Z,1509694417.940 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:33:38.225Z,1509694418.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:38.240Z,1509694418.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:33:38.241Z,1509694418.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:38.345Z,1509694418.345 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:33:38.370Z,1509694418.370 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:33:38.370Z,1509694418.370 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T07:33:38.485Z,1509694418.485 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:33:38.624Z,1509694418.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:38.659Z,1509694418.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:33:38.660Z,1509694418.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:39.029Z,1509694419.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:39.058Z,1509694419.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:33:39.059Z,1509694419.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:39.429Z,1509694419.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:39.454Z,1509694419.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:33:39.455Z,1509694419.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:39.822Z,1509694419.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:39.852Z,1509694419.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:33:39.853Z,1509694419.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:40.219Z,1509694420.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:40.250Z,1509694420.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:33:40.251Z,1509694420.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:40.618Z,1509694420.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:40.627Z,1509694420.627 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T07:33:40.627Z,1509694420.627 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:33:40.627Z,1509694420.627 [BPC1](ERROR): Data Fault
2017-11-03T07:33:40.652Z,1509694420.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:33:40.653Z,1509694420.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:40.749Z,1509694420.749 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:33:41.017Z,1509694421.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:41.032Z,1509694421.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:33:41.033Z,1509694421.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:41.037Z,1509694421.037 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T07:28:40.7Z
2017-11-03T07:33:41.037Z,1509694421.037 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T07:33:41.037Z,1509694421.037 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T07:33:41.416Z,1509694421.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:41.431Z,1509694421.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:33:41.432Z,1509694421.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:41.942Z,1509694421.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:41.967Z,1509694421.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T07:33:41.968Z,1509694421.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:42.061Z,1509694422.061 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:33:42.061Z,1509694422.061 [BPC1] No Fault, FailCount= 1
2017-11-03T07:33:42.230Z,1509694422.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:42.310Z,1509694422.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T07:33:42.311Z,1509694422.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:45.326Z,1509694425.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:45.382Z,1509694425.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-03T07:33:45.383Z,1509694425.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:45.513Z,1509694425.513 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171103T001125/Courier0172.lzma
2017-11-03T07:33:45.534Z,1509694425.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:45.571Z,1509694425.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T07:33:45.577Z,1509694425.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:45.946Z,1509694425.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:45.961Z,1509694425.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T07:33:45.962Z,1509694425.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:46.307Z,1509694426.307 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0172.lzma.bak
2017-11-03T07:33:46.307Z,1509694426.307 [DataOverHttps](INFO): SBD MOMSN=5183028
2017-11-03T07:33:46.348Z,1509694426.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:46.362Z,1509694426.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T07:33:46.363Z,1509694426.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:46.945Z,1509694426.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:46.959Z,1509694426.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-03T07:33:46.961Z,1509694426.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:47.148Z,1509694427.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:47.189Z,1509694427.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T07:33:47.190Z,1509694427.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:50.242Z,1509694430.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:50.262Z,1509694430.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:33:50.263Z,1509694430.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:50.434Z,1509694430.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:50.451Z,1509694430.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T07:33:50.452Z,1509694430.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:50.806Z,1509694430.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:50.854Z,1509694430.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T07:33:50.855Z,1509694430.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:51.211Z,1509694431.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:51.249Z,1509694431.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T07:33:51.250Z,1509694431.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:51.607Z,1509694431.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:51.622Z,1509694431.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T07:33:51.623Z,1509694431.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:52.019Z,1509694432.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:52.047Z,1509694432.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T07:33:52.048Z,1509694432.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:55.161Z,1509694435.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:55.196Z,1509694435.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T07:33:55.197Z,1509694435.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:55.298Z,1509694435.298 [DataOverHttps](INFO): Sending 274 bytes from file Logs/20171103T001125/Express0173.lzma
2017-11-03T07:33:55.346Z,1509694435.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:55.373Z,1509694435.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T07:33:55.374Z,1509694435.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:55.719Z,1509694435.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:55.755Z,1509694435.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T07:33:55.757Z,1509694435.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:56.095Z,1509694436.095 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0173.lzma.bak
2017-11-03T07:33:56.095Z,1509694436.095 [DataOverHttps](INFO): SBD MOMSN=5183031
2017-11-03T07:33:56.118Z,1509694436.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:56.162Z,1509694436.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-03T07:33:56.163Z,1509694436.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:56.732Z,1509694436.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:56.754Z,1509694436.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T07:33:56.755Z,1509694436.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:33:56.759Z,1509694436.759 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T07:33:56.759Z,1509694436.759 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T07:33:56.759Z,1509694436.759 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T07:33:56.935Z,1509694436.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:33:56.966Z,1509694436.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T07:33:56.967Z,1509694436.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:00.027Z,1509694440.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:00.132Z,1509694440.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:00.281Z,1509694440.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:00.315Z,1509694440.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:00.664Z,1509694440.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:00.679Z,1509694440.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:01.072Z,1509694441.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:01.127Z,1509694441.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:01.464Z,1509694441.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:01.479Z,1509694441.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:01.877Z,1509694441.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:01.922Z,1509694441.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:02.277Z,1509694442.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:02.326Z,1509694442.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:02.677Z,1509694442.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:02.707Z,1509694442.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:03.064Z,1509694443.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:03.079Z,1509694443.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:03.468Z,1509694443.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:03.484Z,1509694443.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:03.864Z,1509694443.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:03.879Z,1509694443.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:04.264Z,1509694444.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:04.279Z,1509694444.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:04.664Z,1509694444.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:04.679Z,1509694444.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:05.070Z,1509694445.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:05.085Z,1509694445.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:05.477Z,1509694445.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:05.508Z,1509694445.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:05.881Z,1509694445.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:05.905Z,1509694445.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:06.265Z,1509694446.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:06.280Z,1509694446.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:06.665Z,1509694446.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:06.680Z,1509694446.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:07.069Z,1509694447.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:07.085Z,1509694447.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:07.465Z,1509694447.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:07.480Z,1509694447.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:07.878Z,1509694447.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:07.907Z,1509694447.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:08.278Z,1509694448.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:08.309Z,1509694448.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:08.678Z,1509694448.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:08.706Z,1509694448.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:09.065Z,1509694449.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:09.081Z,1509694449.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:09.464Z,1509694449.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:09.487Z,1509694449.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:09.864Z,1509694449.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:09.879Z,1509694449.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:10.265Z,1509694450.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:10.280Z,1509694450.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:10.665Z,1509694450.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:10.680Z,1509694450.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:11.078Z,1509694451.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:11.107Z,1509694451.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:11.477Z,1509694451.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:11.512Z,1509694451.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:11.878Z,1509694451.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:11.911Z,1509694451.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:12.264Z,1509694452.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:12.287Z,1509694452.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:12.664Z,1509694452.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:12.680Z,1509694452.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:13.067Z,1509694453.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:13.083Z,1509694453.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:13.468Z,1509694453.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:13.484Z,1509694453.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:13.877Z,1509694453.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:13.913Z,1509694453.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:14.277Z,1509694454.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:14.309Z,1509694454.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:14.670Z,1509694454.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:14.715Z,1509694454.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:15.066Z,1509694455.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:15.081Z,1509694455.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:15.467Z,1509694455.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:15.482Z,1509694455.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:15.864Z,1509694455.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:15.879Z,1509694455.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:16.268Z,1509694456.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:16.287Z,1509694456.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:16.665Z,1509694456.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:16.679Z,1509694456.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:17.069Z,1509694457.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:17.085Z,1509694457.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:17.473Z,1509694457.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:17.482Z,1509694457.482 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:34:17.482Z,1509694457.482 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:34:17.482Z,1509694457.482 [BPC1](ERROR): Communications Fault
2017-11-03T07:34:17.490Z,1509694457.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:17.606Z,1509694457.606 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:34:17.877Z,1509694457.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:17.898Z,1509694457.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:18.264Z,1509694458.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:18.279Z,1509694458.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:18.659Z,1509694458.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:18.690Z,1509694458.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:18.777Z,1509694458.777 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:34:18.777Z,1509694458.777 [BPC1] No Fault, FailCount= 1
2017-11-03T07:34:19.055Z,1509694459.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:19.139Z,1509694459.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:19.463Z,1509694459.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:19.488Z,1509694459.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:19.877Z,1509694459.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:19.893Z,1509694459.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:20.285Z,1509694460.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:20.306Z,1509694460.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:20.709Z,1509694460.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:20.733Z,1509694460.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:21.060Z,1509694461.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:21.090Z,1509694461.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:21.463Z,1509694461.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:21.504Z,1509694461.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:21.863Z,1509694461.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:21.888Z,1509694461.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:22.261Z,1509694462.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:22.287Z,1509694462.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:22.659Z,1509694462.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:22.690Z,1509694462.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:23.081Z,1509694463.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:23.096Z,1509694463.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:23.486Z,1509694463.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:23.546Z,1509694463.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:23.886Z,1509694463.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:23.901Z,1509694463.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:24.263Z,1509694464.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:24.289Z,1509694464.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:24.661Z,1509694464.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:24.688Z,1509694464.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:25.064Z,1509694465.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:25.090Z,1509694465.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:25.457Z,1509694465.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:25.492Z,1509694465.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:25.910Z,1509694465.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:25.965Z,1509694465.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:26.286Z,1509694466.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:26.300Z,1509694466.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:26.682Z,1509694466.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:26.700Z,1509694466.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:27.059Z,1509694467.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:27.091Z,1509694467.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:27.463Z,1509694467.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:27.500Z,1509694467.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:27.860Z,1509694467.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:27.892Z,1509694467.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:28.261Z,1509694468.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:28.277Z,1509694468.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:28.656Z,1509694468.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:28.671Z,1509694468.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:29.073Z,1509694469.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:29.101Z,1509694469.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:29.477Z,1509694469.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:29.510Z,1509694469.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:29.877Z,1509694469.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:29.903Z,1509694469.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:30.260Z,1509694470.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:30.275Z,1509694470.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:30.660Z,1509694470.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:30.675Z,1509694470.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:31.061Z,1509694471.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:31.075Z,1509694471.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:31.460Z,1509694471.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:31.475Z,1509694471.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:31.873Z,1509694471.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:31.906Z,1509694471.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:32.273Z,1509694472.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:32.301Z,1509694472.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:32.678Z,1509694472.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:32.699Z,1509694472.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:33.056Z,1509694473.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:33.071Z,1509694473.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:33.460Z,1509694473.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:33.475Z,1509694473.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:33.861Z,1509694473.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:33.876Z,1509694473.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:34.262Z,1509694474.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:34.323Z,1509694474.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:34.661Z,1509694474.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:34.675Z,1509694474.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:35.074Z,1509694475.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:35.100Z,1509694475.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:35.474Z,1509694475.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:35.499Z,1509694475.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:35.873Z,1509694475.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:35.940Z,1509694475.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:36.257Z,1509694476.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:36.272Z,1509694476.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:36.661Z,1509694476.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:36.707Z,1509694476.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:37.061Z,1509694477.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:37.102Z,1509694477.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:37.461Z,1509694477.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:37.478Z,1509694477.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:37.874Z,1509694477.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:37.897Z,1509694477.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:38.273Z,1509694478.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:38.302Z,1509694478.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:38.673Z,1509694478.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:38.698Z,1509694478.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:39.059Z,1509694479.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:39.079Z,1509694479.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:39.467Z,1509694479.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:39.502Z,1509694479.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:39.860Z,1509694479.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:39.875Z,1509694479.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:40.260Z,1509694480.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:40.299Z,1509694480.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:40.667Z,1509694480.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:40.681Z,1509694480.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:41.078Z,1509694481.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:41.093Z,1509694481.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:41.477Z,1509694481.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:41.492Z,1509694481.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:41.877Z,1509694481.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:41.898Z,1509694481.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:42.271Z,1509694482.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:42.291Z,1509694482.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:42.668Z,1509694482.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:42.683Z,1509694482.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:43.072Z,1509694483.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:43.086Z,1509694483.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:43.471Z,1509694483.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:43.487Z,1509694483.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:43.876Z,1509694483.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:43.899Z,1509694483.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:44.276Z,1509694484.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:44.291Z,1509694484.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:44.676Z,1509694484.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:44.691Z,1509694484.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:45.068Z,1509694485.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:45.083Z,1509694485.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:45.472Z,1509694485.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:45.487Z,1509694485.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:45.868Z,1509694485.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:45.884Z,1509694485.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:46.270Z,1509694486.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:46.285Z,1509694486.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:46.673Z,1509694486.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:46.687Z,1509694486.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:47.078Z,1509694487.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:47.093Z,1509694487.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:47.477Z,1509694487.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:47.492Z,1509694487.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:47.878Z,1509694487.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:47.937Z,1509694487.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:48.271Z,1509694488.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:48.287Z,1509694488.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:48.668Z,1509694488.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:48.684Z,1509694488.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:49.073Z,1509694489.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:49.127Z,1509694489.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:49.465Z,1509694489.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:49.488Z,1509694489.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:49.884Z,1509694489.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:49.900Z,1509694489.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:50.285Z,1509694490.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:50.324Z,1509694490.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:50.678Z,1509694490.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:50.693Z,1509694490.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:51.071Z,1509694491.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:51.130Z,1509694491.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:51.472Z,1509694491.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:51.526Z,1509694491.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:51.878Z,1509694491.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:51.940Z,1509694491.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:52.269Z,1509694492.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:52.285Z,1509694492.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:52.671Z,1509694492.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:52.686Z,1509694492.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:53.081Z,1509694493.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:53.097Z,1509694493.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:53.484Z,1509694493.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:53.500Z,1509694493.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:53.884Z,1509694493.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:53.899Z,1509694493.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:54.271Z,1509694494.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:54.291Z,1509694494.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:54.670Z,1509694494.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:54.691Z,1509694494.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:55.072Z,1509694495.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:55.086Z,1509694495.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:55.470Z,1509694495.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:55.491Z,1509694495.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:55.880Z,1509694495.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:55.895Z,1509694495.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:56.284Z,1509694496.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:56.299Z,1509694496.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:56.681Z,1509694496.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:56.695Z,1509694496.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:57.070Z,1509694497.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:57.091Z,1509694497.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:34:57.472Z,1509694497.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:34:57.487Z,1509694497.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:00.590Z,1509694500.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:00.682Z,1509694500.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:00.830Z,1509694500.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:00.863Z,1509694500.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:01.237Z,1509694501.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:01.270Z,1509694501.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:01.642Z,1509694501.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:01.658Z,1509694501.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:02.022Z,1509694502.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:02.050Z,1509694502.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:02.408Z,1509694502.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:02.470Z,1509694502.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:02.808Z,1509694502.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:02.824Z,1509694502.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:03.209Z,1509694503.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:03.255Z,1509694503.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:03.608Z,1509694503.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:03.674Z,1509694503.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:04.024Z,1509694504.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:04.053Z,1509694504.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:04.426Z,1509694504.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:04.467Z,1509694504.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:04.822Z,1509694504.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:04.863Z,1509694504.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:05.208Z,1509694505.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:05.225Z,1509694505.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:05.612Z,1509694505.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:05.667Z,1509694505.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:06.013Z,1509694506.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:06.078Z,1509694506.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:06.407Z,1509694506.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:06.423Z,1509694506.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:06.827Z,1509694506.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:06.853Z,1509694506.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:07.231Z,1509694507.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:07.262Z,1509694507.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:07.622Z,1509694507.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:07.657Z,1509694507.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:08.011Z,1509694508.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:08.051Z,1509694508.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:08.407Z,1509694508.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:08.422Z,1509694508.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:08.808Z,1509694508.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:08.827Z,1509694508.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:09.213Z,1509694509.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:09.227Z,1509694509.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:09.607Z,1509694509.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:09.622Z,1509694509.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:10.022Z,1509694510.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:10.056Z,1509694510.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:10.428Z,1509694510.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:10.462Z,1509694510.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:10.825Z,1509694510.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:10.859Z,1509694510.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:11.208Z,1509694511.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:11.223Z,1509694511.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:11.612Z,1509694511.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:11.630Z,1509694511.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:12.007Z,1509694512.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:12.042Z,1509694512.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:12.411Z,1509694512.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:12.437Z,1509694512.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:12.829Z,1509694512.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:12.848Z,1509694512.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:13.233Z,1509694513.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:13.247Z,1509694513.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:13.633Z,1509694513.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:13.648Z,1509694513.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:14.008Z,1509694514.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:14.054Z,1509694514.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:14.411Z,1509694514.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:14.440Z,1509694514.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:14.811Z,1509694514.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:14.840Z,1509694514.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:15.209Z,1509694515.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:15.239Z,1509694515.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:15.608Z,1509694515.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:15.656Z,1509694515.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:16.026Z,1509694516.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:16.045Z,1509694516.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:16.435Z,1509694516.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:16.455Z,1509694516.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:16.840Z,1509694516.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:16.882Z,1509694516.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:17.204Z,1509694517.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:17.238Z,1509694517.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:17.608Z,1509694517.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:17.667Z,1509694517.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:18.009Z,1509694518.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:18.040Z,1509694518.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:18.411Z,1509694518.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:18.445Z,1509694518.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:18.821Z,1509694518.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:18.889Z,1509694518.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:19.221Z,1509694519.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:19.258Z,1509694519.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:19.622Z,1509694519.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:19.688Z,1509694519.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:20.009Z,1509694520.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:20.086Z,1509694520.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:20.409Z,1509694520.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:20.450Z,1509694520.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:20.809Z,1509694520.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:20.824Z,1509694520.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:21.208Z,1509694521.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:21.225Z,1509694521.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:21.607Z,1509694521.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:21.627Z,1509694521.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:22.022Z,1509694522.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:22.056Z,1509694522.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:22.430Z,1509694522.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:22.463Z,1509694522.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:22.844Z,1509694522.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:22.858Z,1509694522.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:23.204Z,1509694523.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:23.251Z,1509694523.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:23.608Z,1509694523.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:23.623Z,1509694523.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:24.008Z,1509694524.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:24.022Z,1509694524.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:24.408Z,1509694524.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:24.424Z,1509694524.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:24.823Z,1509694524.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:24.853Z,1509694524.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:25.221Z,1509694525.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:25.255Z,1509694525.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:25.621Z,1509694525.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:25.658Z,1509694525.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:26.012Z,1509694526.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:26.030Z,1509694526.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:26.411Z,1509694526.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:26.430Z,1509694526.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:26.808Z,1509694526.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:26.822Z,1509694526.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:27.212Z,1509694527.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:27.227Z,1509694527.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:27.608Z,1509694527.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:27.630Z,1509694527.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:28.024Z,1509694528.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:28.055Z,1509694528.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:28.425Z,1509694528.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:28.467Z,1509694528.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:28.829Z,1509694528.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:28.858Z,1509694528.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:29.212Z,1509694529.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:29.230Z,1509694529.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:29.611Z,1509694529.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:29.629Z,1509694529.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:30.012Z,1509694530.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:30.027Z,1509694530.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:30.410Z,1509694530.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:30.426Z,1509694530.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:30.827Z,1509694530.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:30.879Z,1509694530.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:31.227Z,1509694531.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:31.258Z,1509694531.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:31.258Z,1509694531.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 147
2017-11-03T07:35:31.258Z,1509694531.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:35:31.260Z,1509694531.260 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:31.260Z,1509694531.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 147
2017-11-03T07:35:31.260Z,1509694531.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:35:31.262Z,1509694531.262 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:31.262Z,1509694531.262 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 147
2017-11-03T07:35:31.262Z,1509694531.262 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:35:31.345Z,1509694531.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:35:31.345Z,1509694531.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:35:31.345Z,1509694531.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:35:31.620Z,1509694531.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:31.760Z,1509694531.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:35:31.760Z,1509694531.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 147
2017-11-03T07:35:31.761Z,1509694531.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:35:31.761Z,1509694531.761 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 147
2017-11-03T07:35:31.761Z,1509694531.761 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:35:31.761Z,1509694531.761 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 147
2017-11-03T07:35:32.018Z,1509694532.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:32.035Z,1509694532.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:35:32.035Z,1509694532.035 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:35:32.036Z,1509694532.036 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:35:32.037Z,1509694532.037 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:35:32.038Z,1509694532.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:35:32.038Z,1509694532.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:35:32.039Z,1509694532.039 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:35:32.039Z,1509694532.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:35:32.040Z,1509694532.040 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:35:32.417Z,1509694532.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:32.435Z,1509694532.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:35:32.436Z,1509694532.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:32.813Z,1509694532.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:32.833Z,1509694532.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:35:32.834Z,1509694532.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:33.217Z,1509694533.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:33.265Z,1509694533.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:35:33.266Z,1509694533.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:33.614Z,1509694533.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:33.628Z,1509694533.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:35:33.629Z,1509694533.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:34.026Z,1509694534.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:34.050Z,1509694534.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:35:34.051Z,1509694534.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:34.429Z,1509694534.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:34.450Z,1509694534.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:35:34.451Z,1509694534.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:34.829Z,1509694534.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:34.869Z,1509694534.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:35:34.870Z,1509694534.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:35.212Z,1509694535.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:35.227Z,1509694535.227 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:35:35.227Z,1509694535.227 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:35:35.227Z,1509694535.227 [BPC1](ERROR): Communications Fault
2017-11-03T07:35:35.245Z,1509694535.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:35:35.246Z,1509694535.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:35.337Z,1509694535.337 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:35:35.619Z,1509694535.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:35.637Z,1509694535.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:35:35.638Z,1509694535.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:36.004Z,1509694536.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:36.034Z,1509694536.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:35:36.035Z,1509694536.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:36.420Z,1509694536.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:36.464Z,1509694536.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:35:36.465Z,1509694536.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:36.565Z,1509694536.565 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:35:36.565Z,1509694536.565 [BPC1] No Fault, FailCount= 1
2017-11-03T07:35:36.829Z,1509694536.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:36.912Z,1509694536.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T07:35:36.913Z,1509694536.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:37.232Z,1509694537.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:37.269Z,1509694537.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:35:37.270Z,1509694537.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:37.632Z,1509694537.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:37.647Z,1509694537.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:35:37.647Z,1509694537.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:38.019Z,1509694538.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:38.074Z,1509694538.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:35:38.075Z,1509694538.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:38.417Z,1509694538.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:38.435Z,1509694538.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:35:38.437Z,1509694538.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:38.818Z,1509694538.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:38.837Z,1509694538.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:35:38.838Z,1509694538.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:39.220Z,1509694539.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:39.239Z,1509694539.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:35:39.241Z,1509694539.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:39.618Z,1509694539.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:39.643Z,1509694539.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:35:39.645Z,1509694539.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:40.028Z,1509694540.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:40.046Z,1509694540.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:35:40.047Z,1509694540.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:40.433Z,1509694540.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:40.447Z,1509694540.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T07:35:40.448Z,1509694540.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:40.832Z,1509694540.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:40.846Z,1509694540.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:35:40.847Z,1509694540.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:41.213Z,1509694541.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:41.263Z,1509694541.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:35:41.264Z,1509694541.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:41.616Z,1509694541.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:41.632Z,1509694541.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:35:41.633Z,1509694541.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:42.018Z,1509694542.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:42.038Z,1509694542.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:35:42.039Z,1509694542.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:42.421Z,1509694542.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:42.437Z,1509694542.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:35:42.438Z,1509694542.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:42.828Z,1509694542.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:42.869Z,1509694542.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:35:42.870Z,1509694542.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:43.229Z,1509694543.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:43.270Z,1509694543.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:35:43.270Z,1509694543.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:43.626Z,1509694543.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:43.644Z,1509694543.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:35:43.645Z,1509694543.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:44.020Z,1509694544.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:44.035Z,1509694544.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:35:44.036Z,1509694544.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:44.417Z,1509694544.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:44.466Z,1509694544.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:35:44.466Z,1509694544.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:44.819Z,1509694544.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:44.834Z,1509694544.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:35:44.836Z,1509694544.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:45.219Z,1509694545.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:45.238Z,1509694545.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:35:45.239Z,1509694545.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:45.618Z,1509694545.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:45.637Z,1509694545.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:35:45.638Z,1509694545.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:46.029Z,1509694546.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:46.067Z,1509694546.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:35:46.069Z,1509694546.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:46.428Z,1509694546.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:46.446Z,1509694546.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:35:46.447Z,1509694546.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:46.831Z,1509694546.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:46.846Z,1509694546.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:35:46.847Z,1509694546.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:47.221Z,1509694547.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:47.236Z,1509694547.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:35:47.237Z,1509694547.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:47.618Z,1509694547.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:47.643Z,1509694547.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:35:47.645Z,1509694547.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:48.021Z,1509694548.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:48.038Z,1509694548.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:35:48.039Z,1509694548.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:48.419Z,1509694548.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:48.482Z,1509694548.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:35:48.483Z,1509694548.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:48.830Z,1509694548.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:48.850Z,1509694548.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:35:48.851Z,1509694548.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:49.229Z,1509694549.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:49.268Z,1509694549.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:35:49.269Z,1509694549.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:49.628Z,1509694549.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:49.686Z,1509694549.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:35:49.687Z,1509694549.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:50.018Z,1509694550.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:50.036Z,1509694550.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:35:50.037Z,1509694550.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:50.419Z,1509694550.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:50.474Z,1509694550.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:35:50.475Z,1509694550.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:50.813Z,1509694550.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:50.870Z,1509694550.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:35:50.871Z,1509694550.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:51.213Z,1509694551.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:51.227Z,1509694551.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T07:35:51.229Z,1509694551.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:51.617Z,1509694551.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:51.636Z,1509694551.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:52.030Z,1509694552.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:52.051Z,1509694552.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:52.427Z,1509694552.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:52.466Z,1509694552.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:52.829Z,1509694552.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:52.847Z,1509694552.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:53.212Z,1509694553.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:53.240Z,1509694553.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:53.617Z,1509694553.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:53.634Z,1509694553.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:54.018Z,1509694554.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:54.065Z,1509694554.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:54.413Z,1509694554.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:54.429Z,1509694554.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:54.830Z,1509694554.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:54.846Z,1509694554.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:55.231Z,1509694555.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:55.251Z,1509694555.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:55.625Z,1509694555.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:55.664Z,1509694555.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:56.016Z,1509694556.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:56.036Z,1509694556.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:56.417Z,1509694556.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:56.436Z,1509694556.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:56.818Z,1509694556.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:56.835Z,1509694556.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:57.219Z,1509694557.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:57.244Z,1509694557.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:35:57.622Z,1509694557.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:35:57.641Z,1509694557.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:02.930Z,1509694562.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:03.046Z,1509694563.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:03.197Z,1509694563.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:03.230Z,1509694563.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:03.615Z,1509694563.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:03.630Z,1509694563.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:03.989Z,1509694563.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:04.043Z,1509694564.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:04.387Z,1509694564.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:04.450Z,1509694564.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:04.796Z,1509694564.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:04.851Z,1509694564.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:05.192Z,1509694565.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:05.245Z,1509694565.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:05.591Z,1509694565.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:05.645Z,1509694565.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:05.990Z,1509694565.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:06.015Z,1509694566.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:06.385Z,1509694566.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:06.404Z,1509694566.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:06.797Z,1509694566.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:06.853Z,1509694566.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:07.199Z,1509694567.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:07.244Z,1509694567.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:07.598Z,1509694567.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:07.622Z,1509694567.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:08.007Z,1509694568.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:08.029Z,1509694568.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:08.377Z,1509694568.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:08.411Z,1509694568.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:08.787Z,1509694568.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:08.830Z,1509694568.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:09.198Z,1509694569.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:09.228Z,1509694569.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:09.600Z,1509694569.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:09.631Z,1509694569.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:09.978Z,1509694569.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:10.018Z,1509694570.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:10.376Z,1509694570.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:10.435Z,1509694570.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:10.809Z,1509694570.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:10.861Z,1509694570.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:11.200Z,1509694571.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:11.233Z,1509694571.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:11.587Z,1509694571.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:11.656Z,1509694571.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:12.003Z,1509694572.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:12.031Z,1509694572.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:12.376Z,1509694572.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:12.424Z,1509694572.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:12.791Z,1509694572.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:12.807Z,1509694572.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:13.200Z,1509694573.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:13.244Z,1509694573.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:13.595Z,1509694573.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:13.619Z,1509694573.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:13.987Z,1509694573.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:14.014Z,1509694574.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:14.378Z,1509694574.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:14.415Z,1509694574.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:14.797Z,1509694574.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:14.857Z,1509694574.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:15.209Z,1509694575.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:15.224Z,1509694575.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:15.606Z,1509694575.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:15.650Z,1509694575.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:15.980Z,1509694575.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:16.051Z,1509694576.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:16.375Z,1509694576.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:16.427Z,1509694576.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:16.795Z,1509694576.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:16.811Z,1509694576.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:17.207Z,1509694577.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:17.224Z,1509694577.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:17.596Z,1509694577.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:17.623Z,1509694577.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:17.980Z,1509694577.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:18.056Z,1509694578.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:18.379Z,1509694578.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:18.405Z,1509694578.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:18.793Z,1509694578.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:18.835Z,1509694578.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:19.194Z,1509694579.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:19.232Z,1509694579.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:19.597Z,1509694579.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:19.612Z,1509694579.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:19.977Z,1509694579.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:20.004Z,1509694580.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:20.379Z,1509694580.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:20.404Z,1509694580.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:20.798Z,1509694580.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:20.813Z,1509694580.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:21.200Z,1509694581.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:21.215Z,1509694581.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:21.594Z,1509694581.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:21.609Z,1509694581.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:21.980Z,1509694581.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:22.005Z,1509694582.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:22.406Z,1509694582.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:22.425Z,1509694582.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:22.794Z,1509694582.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:22.809Z,1509694582.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:23.202Z,1509694583.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:23.255Z,1509694583.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:23.597Z,1509694583.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:23.624Z,1509694583.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:23.980Z,1509694583.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:24.005Z,1509694584.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:24.378Z,1509694584.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:24.405Z,1509694584.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:24.796Z,1509694584.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:24.810Z,1509694584.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:25.196Z,1509694585.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:25.211Z,1509694585.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:25.596Z,1509694585.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:25.611Z,1509694585.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:25.981Z,1509694585.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:25.996Z,1509694585.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:26.387Z,1509694586.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:26.402Z,1509694586.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:26.796Z,1509694586.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:26.812Z,1509694586.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:27.196Z,1509694587.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:27.210Z,1509694587.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:27.609Z,1509694587.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:27.639Z,1509694587.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:27.988Z,1509694587.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:28.003Z,1509694588.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:28.386Z,1509694588.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:28.406Z,1509694588.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:28.796Z,1509694588.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:28.811Z,1509694588.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:29.196Z,1509694589.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:29.211Z,1509694589.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:29.596Z,1509694589.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:29.611Z,1509694589.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:29.988Z,1509694589.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:30.055Z,1509694590.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:30.387Z,1509694590.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:30.402Z,1509694590.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:30.797Z,1509694590.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:30.839Z,1509694590.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:31.200Z,1509694591.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:31.215Z,1509694591.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:31.597Z,1509694591.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:31.651Z,1509694591.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:31.988Z,1509694591.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:32.006Z,1509694592.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:32.373Z,1509694592.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:32.423Z,1509694592.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:32.797Z,1509694592.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:32.815Z,1509694592.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:33.199Z,1509694593.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:33.214Z,1509694593.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:33.601Z,1509694593.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:33.618Z,1509694593.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:33.989Z,1509694593.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:34.005Z,1509694594.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:34.386Z,1509694594.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:34.406Z,1509694594.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:34.801Z,1509694594.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:34.816Z,1509694594.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:35.198Z,1509694595.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:35.213Z,1509694595.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:35.591Z,1509694595.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:35.615Z,1509694595.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:35.988Z,1509694595.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:36.003Z,1509694596.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:36.386Z,1509694596.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:36.407Z,1509694596.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:36.797Z,1509694596.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:36.813Z,1509694596.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:37.200Z,1509694597.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:37.215Z,1509694597.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:37.597Z,1509694597.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:37.612Z,1509694597.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:37.985Z,1509694597.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:37.000Z,1509694598.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:38.372Z,1509694598.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:38.398Z,1509694598.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:38.799Z,1509694598.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:38.820Z,1509694598.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:39.197Z,1509694599.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:39.212Z,1509694599.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:39.597Z,1509694599.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:39.618Z,1509694599.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:39.985Z,1509694599.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:40.001Z,1509694600.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:40.387Z,1509694600.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:40.407Z,1509694600.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:40.797Z,1509694600.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:40.812Z,1509694600.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:41.196Z,1509694601.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:41.211Z,1509694601.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:41.596Z,1509694601.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:41.611Z,1509694601.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:41.989Z,1509694601.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:42.003Z,1509694602.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:42.386Z,1509694602.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:42.401Z,1509694602.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:42.797Z,1509694602.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:42.864Z,1509694602.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:43.200Z,1509694603.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:43.257Z,1509694603.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:43.597Z,1509694603.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:43.612Z,1509694603.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:43.987Z,1509694603.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:44.007Z,1509694604.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:44.387Z,1509694604.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:44.443Z,1509694604.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:44.802Z,1509694604.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:44.823Z,1509694604.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:45.196Z,1509694605.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:45.250Z,1509694605.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:45.594Z,1509694605.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:45.609Z,1509694605.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:45.987Z,1509694605.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:46.046Z,1509694606.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:46.384Z,1509694606.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:46.407Z,1509694606.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:46.794Z,1509694606.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:46.814Z,1509694606.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:47.197Z,1509694607.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:47.212Z,1509694607.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:47.597Z,1509694607.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:47.612Z,1509694607.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:47.988Z,1509694607.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:48.003Z,1509694608.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:48.386Z,1509694608.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:48.401Z,1509694608.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:48.797Z,1509694608.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:48.812Z,1509694608.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:49.202Z,1509694609.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:49.216Z,1509694609.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:49.597Z,1509694609.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:49.613Z,1509694609.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:49.987Z,1509694609.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:50.002Z,1509694610.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:50.373Z,1509694610.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:50.401Z,1509694610.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:50.786Z,1509694610.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:50.820Z,1509694610.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:51.200Z,1509694611.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:51.218Z,1509694611.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:51.598Z,1509694611.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:51.612Z,1509694611.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:51.989Z,1509694611.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:52.004Z,1509694612.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:52.385Z,1509694612.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:52.405Z,1509694612.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:52.794Z,1509694612.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:52.809Z,1509694612.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:53.200Z,1509694613.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:53.216Z,1509694613.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:53.597Z,1509694613.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:53.613Z,1509694613.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:53.986Z,1509694613.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:54.002Z,1509694614.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:54.373Z,1509694614.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:54.407Z,1509694614.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:54.789Z,1509694614.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:54.804Z,1509694614.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:55.194Z,1509694615.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:55.208Z,1509694615.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:55.597Z,1509694615.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:55.612Z,1509694615.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:55.985Z,1509694615.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:56.001Z,1509694616.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:56.387Z,1509694616.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:56.403Z,1509694616.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:56.804Z,1509694616.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:56.847Z,1509694616.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:57.196Z,1509694617.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:57.262Z,1509694617.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:57.600Z,1509694617.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:57.617Z,1509694617.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:36:57.989Z,1509694617.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:36:58.055Z,1509694618.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:01.074Z,1509694621.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:01.103Z,1509694621.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:01.258Z,1509694621.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:01.279Z,1509694621.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:01.656Z,1509694621.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:01.710Z,1509694621.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:02.053Z,1509694622.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:02.068Z,1509694622.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:02.444Z,1509694622.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:02.518Z,1509694622.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:02.840Z,1509694622.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:02.897Z,1509694622.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:03.229Z,1509694623.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:03.259Z,1509694623.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:03.644Z,1509694623.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:03.659Z,1509694623.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:04.052Z,1509694624.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:04.067Z,1509694624.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:04.458Z,1509694624.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:04.473Z,1509694624.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:04.856Z,1509694624.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:04.879Z,1509694624.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:05.243Z,1509694625.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:05.262Z,1509694625.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:05.631Z,1509694625.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:05.656Z,1509694625.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:06.044Z,1509694626.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:06.062Z,1509694626.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:06.446Z,1509694626.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:06.461Z,1509694626.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:06.851Z,1509694626.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:06.866Z,1509694626.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:07.249Z,1509694627.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:07.264Z,1509694627.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:07.655Z,1509694627.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:07.670Z,1509694627.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:08.028Z,1509694628.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:08.067Z,1509694628.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:08.430Z,1509694628.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:08.446Z,1509694628.446 [PNI_TCM](ERROR): CRC does not match. Expected:0x49602 got:0x20262
2017-11-03T07:37:08.471Z,1509694628.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:08.831Z,1509694628.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:08.856Z,1509694628.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:09.245Z,1509694629.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:09.262Z,1509694629.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:09.646Z,1509694629.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:09.667Z,1509694629.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:10.054Z,1509694630.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:10.069Z,1509694630.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:10.456Z,1509694630.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:10.478Z,1509694630.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:10.854Z,1509694630.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:10.869Z,1509694630.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:11.246Z,1509694631.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:11.261Z,1509694631.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:11.645Z,1509694631.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:11.660Z,1509694631.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:12.046Z,1509694632.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:12.061Z,1509694632.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:12.441Z,1509694632.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:12.478Z,1509694632.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:12.857Z,1509694632.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:12.863Z,1509694632.863 [PNI_TCM](ERROR): CRC does not match. Expected:0x22029 got:0x7361
2017-11-03T07:37:12.883Z,1509694632.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:13.256Z,1509694633.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:13.271Z,1509694633.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:13.656Z,1509694633.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:13.718Z,1509694633.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:14.045Z,1509694634.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:14.062Z,1509694634.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:14.446Z,1509694634.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:14.461Z,1509694634.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:14.843Z,1509694634.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:14.875Z,1509694634.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:15.235Z,1509694635.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:15.261Z,1509694635.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:15.629Z,1509694635.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:15.660Z,1509694635.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:16.051Z,1509694636.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:16.100Z,1509694636.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:16.455Z,1509694636.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:16.470Z,1509694636.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:16.848Z,1509694636.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:16.906Z,1509694636.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:17.233Z,1509694637.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:17.296Z,1509694637.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:17.635Z,1509694637.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:17.664Z,1509694637.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:18.047Z,1509694638.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:18.062Z,1509694638.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:18.430Z,1509694638.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:18.462Z,1509694638.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:18.858Z,1509694638.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:18.878Z,1509694638.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:19.259Z,1509694639.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:19.282Z,1509694639.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:19.654Z,1509694639.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:19.670Z,1509694639.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:20.036Z,1509694640.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:20.063Z,1509694640.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:20.428Z,1509694640.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:20.463Z,1509694640.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:20.836Z,1509694640.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:20.863Z,1509694640.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:21.235Z,1509694641.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:21.262Z,1509694641.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:21.631Z,1509694641.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:21.656Z,1509694641.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:22.056Z,1509694642.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:22.070Z,1509694642.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:22.456Z,1509694642.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:22.471Z,1509694642.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:22.850Z,1509694642.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:22.866Z,1509694642.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:23.230Z,1509694643.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:23.262Z,1509694643.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:23.632Z,1509694643.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:23.662Z,1509694643.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:24.034Z,1509694644.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:24.063Z,1509694644.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:24.446Z,1509694644.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:24.466Z,1509694644.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:24.854Z,1509694644.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:24.869Z,1509694644.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:25.259Z,1509694645.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:25.275Z,1509694645.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:25.656Z,1509694645.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:25.671Z,1509694645.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:26.035Z,1509694646.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:26.061Z,1509694646.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:26.446Z,1509694646.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:26.461Z,1509694646.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:26.832Z,1509694646.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:26.871Z,1509694646.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:27.235Z,1509694647.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:27.264Z,1509694647.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:27.647Z,1509694647.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:27.677Z,1509694647.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:28.057Z,1509694648.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:28.071Z,1509694648.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:28.460Z,1509694648.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:28.526Z,1509694648.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:28.856Z,1509694648.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:28.879Z,1509694648.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:29.234Z,1509694649.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:29.286Z,1509694649.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:29.636Z,1509694649.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:29.662Z,1509694649.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:30.030Z,1509694650.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:30.087Z,1509694650.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:30.433Z,1509694650.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:30.461Z,1509694650.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:30.858Z,1509694650.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:30.914Z,1509694650.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:31.253Z,1509694651.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:31.310Z,1509694651.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:31.657Z,1509694651.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:31.671Z,1509694651.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:32.034Z,1509694652.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:32.064Z,1509694652.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:32.435Z,1509694652.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:32.471Z,1509694652.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:32.838Z,1509694652.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:32.865Z,1509694652.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:33.233Z,1509694653.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:33.262Z,1509694653.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:33.638Z,1509694653.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:33.666Z,1509694653.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:34.055Z,1509694654.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:34.070Z,1509694654.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:34.459Z,1509694654.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:34.474Z,1509694654.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:34.858Z,1509694654.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:34.873Z,1509694654.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:35.234Z,1509694655.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:35.263Z,1509694655.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:35.630Z,1509694655.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:35.663Z,1509694655.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:36.037Z,1509694656.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:36.068Z,1509694656.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:36.432Z,1509694656.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:36.468Z,1509694656.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:36.853Z,1509694656.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:36.869Z,1509694656.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:37.254Z,1509694657.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:37.271Z,1509694657.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:37.652Z,1509694657.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:37.670Z,1509694657.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:38.035Z,1509694658.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:38.066Z,1509694658.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:38.433Z,1509694658.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:38.462Z,1509694658.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:38.861Z,1509694658.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:38.877Z,1509694658.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:39.238Z,1509694659.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:39.264Z,1509694659.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:39.632Z,1509694659.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:39.667Z,1509694659.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:40.055Z,1509694660.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:40.070Z,1509694660.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:40.457Z,1509694660.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:40.478Z,1509694660.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:40.853Z,1509694660.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:40.869Z,1509694660.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:41.235Z,1509694661.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:41.264Z,1509694661.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:41.636Z,1509694661.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:41.664Z,1509694661.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:42.035Z,1509694662.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:42.061Z,1509694662.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:42.435Z,1509694662.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:42.479Z,1509694662.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:42.841Z,1509694662.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:42.871Z,1509694662.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:43.259Z,1509694663.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:43.315Z,1509694663.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:43.654Z,1509694663.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:43.670Z,1509694663.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:44.035Z,1509694664.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:44.091Z,1509694664.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:44.439Z,1509694664.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:44.498Z,1509694664.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:44.836Z,1509694664.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:44.845Z,1509694664.845 [PNI_TCM](ERROR): CRC does not match. Expected:0x24824 got:0x6210
2017-11-03T07:37:44.871Z,1509694664.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:45.235Z,1509694665.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:45.286Z,1509694665.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:45.640Z,1509694665.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:45.687Z,1509694665.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:46.047Z,1509694666.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:46.070Z,1509694666.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:46.447Z,1509694666.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:46.474Z,1509694666.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:46.846Z,1509694666.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:46.868Z,1509694666.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:47.240Z,1509694667.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:47.262Z,1509694667.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:47.631Z,1509694667.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:47.670Z,1509694667.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:48.037Z,1509694668.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:48.066Z,1509694668.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:48.437Z,1509694668.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:48.468Z,1509694668.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:48.845Z,1509694668.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:48.870Z,1509694668.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:49.254Z,1509694669.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:49.274Z,1509694669.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:49.655Z,1509694669.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:49.671Z,1509694669.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:50.034Z,1509694670.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:50.071Z,1509694670.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:50.435Z,1509694670.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:50.481Z,1509694670.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:50.835Z,1509694670.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:50.871Z,1509694670.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:51.234Z,1509694671.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:51.270Z,1509694671.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:51.634Z,1509694671.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:51.668Z,1509694671.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:52.052Z,1509694672.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:52.067Z,1509694672.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:52.446Z,1509694672.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:52.473Z,1509694672.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:52.855Z,1509694672.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:52.871Z,1509694672.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:53.237Z,1509694673.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:53.268Z,1509694673.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:53.635Z,1509694673.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:53.669Z,1509694673.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:54.038Z,1509694674.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:54.064Z,1509694674.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:54.437Z,1509694674.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:54.445Z,1509694674.445 [PNI_TCM](ERROR): CRC does not match. Expected:0x63505 got:0x6210
2017-11-03T07:37:54.466Z,1509694674.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:54.860Z,1509694674.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:54.875Z,1509694674.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:55.256Z,1509694675.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:55.271Z,1509694675.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:55.647Z,1509694675.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:55.676Z,1509694675.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:56.034Z,1509694676.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:56.071Z,1509694676.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:56.438Z,1509694676.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:56.445Z,1509694676.445 [PNI_TCM](ERROR): CRC does not match. Expected:0x22210 got:0x57955
2017-11-03T07:37:56.491Z,1509694676.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:56.841Z,1509694676.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:56.868Z,1509694676.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:57.233Z,1509694677.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:57.278Z,1509694677.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:57.635Z,1509694677.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:57.673Z,1509694677.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:37:58.047Z,1509694678.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:37:58.102Z,1509694678.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:01.145Z,1509694681.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:01.177Z,1509694681.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:01.326Z,1509694681.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:01.342Z,1509694681.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:01.702Z,1509694681.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:01.769Z,1509694681.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:02.114Z,1509694682.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:02.129Z,1509694682.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:02.501Z,1509694682.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:02.571Z,1509694682.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:02.922Z,1509694682.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:02.975Z,1509694682.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:03.323Z,1509694683.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:03.338Z,1509694683.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:03.722Z,1509694683.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:03.737Z,1509694683.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:04.100Z,1509694684.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:04.127Z,1509694684.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:04.500Z,1509694684.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:04.528Z,1509694684.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:04.900Z,1509694684.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:04.928Z,1509694684.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:05.301Z,1509694685.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:05.334Z,1509694685.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:05.700Z,1509694685.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:05.727Z,1509694685.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:06.121Z,1509694686.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:06.143Z,1509694686.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:06.521Z,1509694686.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:06.542Z,1509694686.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:06.921Z,1509694686.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:06.937Z,1509694686.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:07.303Z,1509694687.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:07.335Z,1509694687.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:07.700Z,1509694687.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:07.726Z,1509694687.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:08.101Z,1509694688.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:08.127Z,1509694688.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:08.501Z,1509694688.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:08.527Z,1509694688.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:08.922Z,1509694688.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:08.937Z,1509694688.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:09.321Z,1509694689.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:09.336Z,1509694689.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:09.726Z,1509694689.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:09.741Z,1509694689.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:10.101Z,1509694690.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:10.115Z,1509694690.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:10.499Z,1509694690.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:10.514Z,1509694690.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:10.908Z,1509694690.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:10.940Z,1509694690.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:11.304Z,1509694691.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:11.323Z,1509694691.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:11.703Z,1509694691.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:11.719Z,1509694691.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:12.118Z,1509694692.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:12.142Z,1509694692.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:12.517Z,1509694692.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:12.543Z,1509694692.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:12.918Z,1509694692.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:12.946Z,1509694692.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:13.303Z,1509694693.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:13.319Z,1509694693.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:13.707Z,1509694693.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:13.723Z,1509694693.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:14.108Z,1509694694.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:14.145Z,1509694694.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:14.507Z,1509694694.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:14.523Z,1509694694.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:14.918Z,1509694694.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:14.942Z,1509694694.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:15.321Z,1509694695.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:15.423Z,1509694695.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:15.718Z,1509694695.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:15.742Z,1509694695.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:16.105Z,1509694696.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:16.159Z,1509694696.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:16.507Z,1509694696.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:16.522Z,1509694696.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:16.905Z,1509694696.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:16.963Z,1509694696.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:17.305Z,1509694697.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:17.351Z,1509694697.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:17.707Z,1509694697.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:17.722Z,1509694697.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:18.118Z,1509694698.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:18.142Z,1509694698.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:18.513Z,1509694698.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:18.544Z,1509694698.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:18.913Z,1509694698.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:18.946Z,1509694698.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:19.305Z,1509694699.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:19.320Z,1509694699.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:19.705Z,1509694699.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:19.721Z,1509694699.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:20.101Z,1509694700.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:20.116Z,1509694700.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:20.508Z,1509694700.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:20.545Z,1509694700.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:20.919Z,1509694700.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:20.944Z,1509694700.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:21.323Z,1509694701.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:21.349Z,1509694701.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:21.723Z,1509694701.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:21.748Z,1509694701.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:22.104Z,1509694702.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:22.120Z,1509694702.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:22.499Z,1509694702.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:22.514Z,1509694702.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:22.907Z,1509694702.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:22.924Z,1509694702.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:23.305Z,1509694703.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:23.320Z,1509694703.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:23.699Z,1509694703.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:23.714Z,1509694703.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:24.113Z,1509694704.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:24.145Z,1509694704.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:24.518Z,1509694704.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:24.542Z,1509694704.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:24.922Z,1509694704.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:24.947Z,1509694704.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:25.307Z,1509694705.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:25.323Z,1509694705.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:25.707Z,1509694705.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:25.723Z,1509694705.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:26.100Z,1509694706.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:26.115Z,1509694706.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:26.500Z,1509694706.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:26.515Z,1509694706.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:26.918Z,1509694706.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:26.942Z,1509694706.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:27.322Z,1509694707.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:27.350Z,1509694707.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:27.722Z,1509694707.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:27.751Z,1509694707.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:28.104Z,1509694708.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:28.123Z,1509694708.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:28.504Z,1509694708.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:28.519Z,1509694708.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:28.900Z,1509694708.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:28.923Z,1509694708.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:29.307Z,1509694709.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:29.355Z,1509694709.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:29.699Z,1509694709.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:29.759Z,1509694709.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:30.122Z,1509694710.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:30.153Z,1509694710.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:30.521Z,1509694710.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:30.556Z,1509694710.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:30.922Z,1509694710.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:30.967Z,1509694710.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:31.308Z,1509694711.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:31.324Z,1509694711.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:31.708Z,1509694711.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:31.759Z,1509694711.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:32.111Z,1509694712.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:32.126Z,1509694712.126 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:32.126Z,1509694712.126 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 148
2017-11-03T07:38:32.126Z,1509694712.126 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:38:32.128Z,1509694712.128 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:32.128Z,1509694712.128 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 148
2017-11-03T07:38:32.129Z,1509694712.129 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:38:32.130Z,1509694712.130 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:32.130Z,1509694712.130 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 148
2017-11-03T07:38:32.131Z,1509694712.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:38:32.247Z,1509694712.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:38:32.247Z,1509694712.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:38:32.248Z,1509694712.248 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:38:32.510Z,1509694712.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:32.652Z,1509694712.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:38:32.652Z,1509694712.652 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 148
2017-11-03T07:38:32.653Z,1509694712.653 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:38:32.653Z,1509694712.653 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 148
2017-11-03T07:38:32.653Z,1509694712.653 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:38:32.653Z,1509694712.653 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 148
2017-11-03T07:38:32.914Z,1509694712.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:32.928Z,1509694712.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:38:32.929Z,1509694712.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:38:32.929Z,1509694712.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:38:32.929Z,1509694712.929 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:38:32.930Z,1509694712.930 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:38:32.930Z,1509694712.930 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:38:32.931Z,1509694712.931 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:38:32.931Z,1509694712.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:38:32.931Z,1509694712.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:38:33.318Z,1509694713.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:33.332Z,1509694713.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:38:33.333Z,1509694713.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:33.721Z,1509694713.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:33.735Z,1509694713.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:38:33.737Z,1509694713.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:34.108Z,1509694714.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:34.123Z,1509694714.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:38:34.124Z,1509694714.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:34.511Z,1509694714.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:34.526Z,1509694714.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:38:34.527Z,1509694714.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:34.911Z,1509694714.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:34.926Z,1509694714.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:38:34.927Z,1509694714.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:35.309Z,1509694715.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:35.324Z,1509694715.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:38:35.325Z,1509694715.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:35.708Z,1509694715.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:35.722Z,1509694715.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:38:35.723Z,1509694715.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:36.121Z,1509694716.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:36.135Z,1509694716.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:38:36.137Z,1509694716.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:36.521Z,1509694716.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:36.535Z,1509694716.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:38:36.537Z,1509694716.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:36.921Z,1509694716.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:36.935Z,1509694716.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:38:36.936Z,1509694716.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:37.311Z,1509694717.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:37.330Z,1509694717.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:38:37.331Z,1509694717.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:37.730Z,1509694717.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:37.750Z,1509694717.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:38:37.751Z,1509694717.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:38.107Z,1509694718.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:38.142Z,1509694718.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:38:38.143Z,1509694718.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:38.504Z,1509694718.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:38.519Z,1509694718.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:38:38.520Z,1509694718.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:38.918Z,1509694718.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:38.946Z,1509694718.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:38:38.947Z,1509694718.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:39.328Z,1509694719.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:39.343Z,1509694719.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:38:39.344Z,1509694719.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:39.714Z,1509694719.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:39.742Z,1509694719.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:38:39.743Z,1509694719.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:40.100Z,1509694720.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:40.115Z,1509694720.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:38:40.116Z,1509694720.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:40.500Z,1509694720.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:40.515Z,1509694720.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:38:40.515Z,1509694720.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:40.905Z,1509694720.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:40.920Z,1509694720.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:38:40.937Z,1509694720.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:41.300Z,1509694721.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:41.315Z,1509694721.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T07:38:41.316Z,1509694721.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:41.700Z,1509694721.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:41.714Z,1509694721.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:38:41.715Z,1509694721.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:42.114Z,1509694722.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:42.146Z,1509694722.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:38:42.147Z,1509694722.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:42.518Z,1509694722.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:42.542Z,1509694722.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:38:42.543Z,1509694722.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:42.921Z,1509694722.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:42.945Z,1509694722.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:38:42.946Z,1509694722.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:43.300Z,1509694723.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:43.315Z,1509694723.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:38:43.317Z,1509694723.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:43.700Z,1509694723.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:43.715Z,1509694723.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:38:43.717Z,1509694723.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:44.100Z,1509694724.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:44.159Z,1509694724.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:38:44.159Z,1509694724.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:44.507Z,1509694724.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:44.550Z,1509694724.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:38:44.551Z,1509694724.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:44.919Z,1509694724.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:44.974Z,1509694724.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:38:44.975Z,1509694724.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:45.317Z,1509694725.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:45.347Z,1509694725.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:38:45.348Z,1509694725.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:45.720Z,1509694725.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:45.736Z,1509694725.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:38:45.737Z,1509694725.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:46.108Z,1509694726.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:46.165Z,1509694726.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:38:46.166Z,1509694726.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:46.509Z,1509694726.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:46.530Z,1509694726.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:38:46.531Z,1509694726.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:46.911Z,1509694726.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:46.966Z,1509694726.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:38:46.967Z,1509694726.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:47.310Z,1509694727.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:47.370Z,1509694727.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:38:47.370Z,1509694727.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:47.711Z,1509694727.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:47.726Z,1509694727.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:38:47.727Z,1509694727.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:48.121Z,1509694728.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:48.136Z,1509694728.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:38:48.137Z,1509694728.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:48.521Z,1509694728.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:48.535Z,1509694728.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:38:48.537Z,1509694728.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:48.921Z,1509694728.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:48.935Z,1509694728.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:38:48.936Z,1509694728.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:49.311Z,1509694729.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:49.330Z,1509694729.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:38:49.331Z,1509694729.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:49.708Z,1509694729.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:49.723Z,1509694729.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:38:49.724Z,1509694729.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:50.112Z,1509694730.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:50.127Z,1509694730.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:38:50.128Z,1509694730.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:50.511Z,1509694730.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:50.530Z,1509694730.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:38:50.531Z,1509694730.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:50.921Z,1509694730.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:50.935Z,1509694730.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:38:50.937Z,1509694730.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:51.321Z,1509694731.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:51.335Z,1509694731.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:38:51.336Z,1509694731.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:51.721Z,1509694731.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:51.742Z,1509694731.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:38:51.743Z,1509694731.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:52.108Z,1509694732.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:52.123Z,1509694732.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T07:38:52.124Z,1509694732.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:52.511Z,1509694732.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:52.526Z,1509694732.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:52.911Z,1509694732.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:52.927Z,1509694732.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:53.306Z,1509694733.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:53.327Z,1509694733.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:53.712Z,1509694733.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:53.727Z,1509694733.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:54.122Z,1509694734.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:54.137Z,1509694734.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:54.522Z,1509694734.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:54.537Z,1509694734.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:54.922Z,1509694734.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:54.936Z,1509694734.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:55.313Z,1509694735.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:55.329Z,1509694735.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:55.709Z,1509694735.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:55.725Z,1509694735.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:56.113Z,1509694736.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:56.128Z,1509694736.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:56.509Z,1509694736.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:56.525Z,1509694736.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:56.922Z,1509694736.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:56.943Z,1509694736.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:57.321Z,1509694737.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:57.342Z,1509694737.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:57.365Z,1509694737.365 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T07:38:57.366Z,1509694737.366 [Default:CheckIn:C.Wait] Stopped
2017-11-03T07:38:57.366Z,1509694737.366 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T07:38:57.366Z,1509694737.366 [Default:CheckIn:D] Running Loop=1
2017-11-03T07:38:57.722Z,1509694737.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:57.739Z,1509694737.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:57.742Z,1509694737.742 [Default:CheckIn:D] Stopped
2017-11-03T07:38:57.742Z,1509694737.742 [Default:CheckIn:E] Running Loop=1
2017-11-03T07:38:58.114Z,1509694738.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:38:58.130Z,1509694738.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:38:58.133Z,1509694738.133 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 443.836263 min 
2017-11-03T07:38:58.133Z,1509694738.133 [Default:CheckIn:E] Stopped
2017-11-03T07:38:58.134Z,1509694738.134 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T07:38:58.134Z,1509694738.134 [Default:CheckIn] Stopped
2017-11-03T07:38:58.134Z,1509694738.134 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T07:38:58.134Z,1509694738.134 [Default:CheckIn](INFO): Running loop #44
2017-11-03T07:38:58.134Z,1509694738.134 [Default:CheckIn] Running Loop=44
2017-11-03T07:38:58.134Z,1509694738.134 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T07:38:58.134Z,1509694738.134 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T07:39:01.211Z,1509694741.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:01.298Z,1509694741.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:01.432Z,1509694741.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:01.448Z,1509694741.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:01.846Z,1509694741.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:01.891Z,1509694741.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:02.245Z,1509694742.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:02.274Z,1509694742.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:02.634Z,1509694742.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:02.682Z,1509694742.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:03.030Z,1509694743.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:03.079Z,1509694743.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:03.430Z,1509694743.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:03.445Z,1509694743.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:03.830Z,1509694743.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:03.851Z,1509694743.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:04.231Z,1509694744.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:04.246Z,1509694744.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:04.629Z,1509694744.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:04.644Z,1509694744.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:05.037Z,1509694745.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:05.053Z,1509694745.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:05.445Z,1509694745.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:05.473Z,1509694745.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:05.836Z,1509694745.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:05.851Z,1509694745.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:06.228Z,1509694746.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:06.244Z,1509694746.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:06.630Z,1509694746.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:06.649Z,1509694746.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:07.032Z,1509694747.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:07.046Z,1509694747.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:07.428Z,1509694747.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:07.444Z,1509694747.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:07.837Z,1509694747.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:07.853Z,1509694747.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:08.237Z,1509694748.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:08.252Z,1509694748.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:08.634Z,1509694748.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:08.649Z,1509694748.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:09.030Z,1509694749.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:09.050Z,1509694749.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:09.431Z,1509694749.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:09.446Z,1509694749.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:09.833Z,1509694749.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:09.848Z,1509694749.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:10.233Z,1509694750.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:10.249Z,1509694750.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:10.632Z,1509694750.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:10.647Z,1509694750.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:11.034Z,1509694751.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:11.050Z,1509694751.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:11.438Z,1509694751.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:11.454Z,1509694751.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:11.838Z,1509694751.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:11.853Z,1509694751.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:12.231Z,1509694752.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:12.251Z,1509694752.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:12.631Z,1509694752.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:12.647Z,1509694752.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:13.029Z,1509694753.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:13.045Z,1509694753.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:13.430Z,1509694753.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:13.447Z,1509694753.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:13.837Z,1509694753.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:13.875Z,1509694753.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:14.237Z,1509694754.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:14.253Z,1509694754.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:14.638Z,1509694754.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:14.654Z,1509694754.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:15.031Z,1509694755.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:15.046Z,1509694755.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:15.429Z,1509694755.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:15.502Z,1509694755.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:15.829Z,1509694755.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:15.844Z,1509694755.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:16.230Z,1509694756.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:16.283Z,1509694756.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:16.628Z,1509694756.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:16.643Z,1509694756.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:17.034Z,1509694757.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:17.083Z,1509694757.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:17.437Z,1509694757.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:17.477Z,1509694757.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:17.837Z,1509694757.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:17.852Z,1509694757.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:18.230Z,1509694758.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:18.251Z,1509694758.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:18.629Z,1509694758.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:18.644Z,1509694758.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:19.028Z,1509694759.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:19.050Z,1509694759.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:19.430Z,1509694759.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:19.445Z,1509694759.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:19.837Z,1509694759.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:19.852Z,1509694759.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:20.237Z,1509694760.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:20.252Z,1509694760.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:20.634Z,1509694760.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:20.649Z,1509694760.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:21.029Z,1509694761.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:21.044Z,1509694761.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:21.430Z,1509694761.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:21.445Z,1509694761.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:21.830Z,1509694761.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:21.846Z,1509694761.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:22.230Z,1509694762.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:22.246Z,1509694762.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:22.629Z,1509694762.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:22.643Z,1509694762.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:23.034Z,1509694763.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:23.049Z,1509694763.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:23.437Z,1509694763.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:23.451Z,1509694763.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:23.837Z,1509694763.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:23.852Z,1509694763.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:24.230Z,1509694764.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:24.251Z,1509694764.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:24.631Z,1509694764.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:24.645Z,1509694764.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:25.029Z,1509694765.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:25.050Z,1509694765.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:25.430Z,1509694765.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:25.445Z,1509694765.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:25.837Z,1509694765.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:25.858Z,1509694765.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:26.237Z,1509694766.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:26.252Z,1509694766.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:26.637Z,1509694766.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:26.653Z,1509694766.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:27.031Z,1509694767.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:27.046Z,1509694767.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:27.431Z,1509694767.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:27.445Z,1509694767.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:27.830Z,1509694767.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:27.851Z,1509694767.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:28.232Z,1509694768.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:28.247Z,1509694768.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:28.631Z,1509694768.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:28.645Z,1509694768.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:29.038Z,1509694769.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:29.053Z,1509694769.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:29.445Z,1509694769.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:29.521Z,1509694769.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:29.853Z,1509694769.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:29.883Z,1509694769.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:30.229Z,1509694770.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:30.283Z,1509694770.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:30.631Z,1509694770.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:30.645Z,1509694770.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:31.034Z,1509694771.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:31.082Z,1509694771.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:31.431Z,1509694771.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:31.490Z,1509694771.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:31.841Z,1509694771.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:31.862Z,1509694771.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:32.241Z,1509694772.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:32.255Z,1509694772.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:32.640Z,1509694772.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:32.663Z,1509694772.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:33.032Z,1509694773.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:33.047Z,1509694773.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:33.432Z,1509694773.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:33.447Z,1509694773.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:33.832Z,1509694773.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:33.847Z,1509694773.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:34.234Z,1509694774.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:34.248Z,1509694774.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:34.632Z,1509694774.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:34.647Z,1509694774.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:35.041Z,1509694775.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:35.056Z,1509694775.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:35.439Z,1509694775.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:35.455Z,1509694775.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:35.840Z,1509694775.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:35.856Z,1509694775.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:36.229Z,1509694776.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:36.243Z,1509694776.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:36.632Z,1509694776.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:36.646Z,1509694776.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:37.034Z,1509694777.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:37.049Z,1509694777.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:37.428Z,1509694777.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:37.443Z,1509694777.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:37.839Z,1509694777.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:37.854Z,1509694777.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:38.240Z,1509694778.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:38.255Z,1509694778.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:38.640Z,1509694778.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:38.663Z,1509694778.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:39.031Z,1509694779.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:39.046Z,1509694779.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:39.434Z,1509694779.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:39.449Z,1509694779.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:39.831Z,1509694779.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:39.846Z,1509694779.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:40.231Z,1509694780.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:40.246Z,1509694780.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:40.634Z,1509694780.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:40.649Z,1509694780.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:41.040Z,1509694781.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:41.062Z,1509694781.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:41.439Z,1509694781.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:41.462Z,1509694781.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:41.840Z,1509694781.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:41.856Z,1509694781.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:42.232Z,1509694782.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:42.247Z,1509694782.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:42.631Z,1509694782.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:42.645Z,1509694782.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:43.033Z,1509694783.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:43.048Z,1509694783.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:43.431Z,1509694783.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:43.447Z,1509694783.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:43.840Z,1509694783.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:43.929Z,1509694783.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:44.246Z,1509694784.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:44.261Z,1509694784.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:44.641Z,1509694784.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:44.695Z,1509694784.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:45.023Z,1509694785.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:45.048Z,1509694785.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:45.434Z,1509694785.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:45.494Z,1509694785.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:45.823Z,1509694785.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:45.884Z,1509694785.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:46.234Z,1509694786.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:46.249Z,1509694786.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:46.634Z,1509694786.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:46.649Z,1509694786.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:47.045Z,1509694787.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:47.067Z,1509694787.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:47.447Z,1509694787.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:47.461Z,1509694787.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:47.847Z,1509694787.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:47.867Z,1509694787.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:48.223Z,1509694788.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:48.251Z,1509694788.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:48.624Z,1509694788.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:48.649Z,1509694788.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:49.034Z,1509694789.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:49.050Z,1509694789.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:49.423Z,1509694789.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:49.450Z,1509694789.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:49.845Z,1509694789.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:49.861Z,1509694789.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:50.246Z,1509694790.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:50.261Z,1509694790.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:50.645Z,1509694790.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:50.660Z,1509694790.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:51.034Z,1509694791.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:51.054Z,1509694791.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:51.424Z,1509694791.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:51.450Z,1509694791.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:51.835Z,1509694791.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:51.850Z,1509694791.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:52.221Z,1509694792.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:52.247Z,1509694792.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:52.623Z,1509694792.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:52.650Z,1509694792.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:53.048Z,1509694793.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:53.064Z,1509694793.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:53.444Z,1509694793.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:53.466Z,1509694793.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:53.848Z,1509694793.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:53.864Z,1509694793.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:54.233Z,1509694794.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:54.251Z,1509694794.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:54.633Z,1509694794.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:54.648Z,1509694794.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:55.036Z,1509694795.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:55.051Z,1509694795.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:55.433Z,1509694795.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:55.450Z,1509694795.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:55.841Z,1509694795.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:55.862Z,1509694795.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:56.248Z,1509694796.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:56.263Z,1509694796.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:56.645Z,1509694796.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:56.660Z,1509694796.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:57.033Z,1509694797.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:57.054Z,1509694797.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:57.436Z,1509694797.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:57.450Z,1509694797.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:57.835Z,1509694797.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:57.911Z,1509694797.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:39:58.228Z,1509694798.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:39:58.254Z,1509694798.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:01.308Z,1509694801.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:01.358Z,1509694801.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:01.508Z,1509694801.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:01.550Z,1509694801.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:01.904Z,1509694801.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:01.955Z,1509694801.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:02.304Z,1509694802.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:02.348Z,1509694802.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:02.695Z,1509694802.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:02.715Z,1509694802.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:03.093Z,1509694803.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:03.109Z,1509694803.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:03.496Z,1509694803.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:03.511Z,1509694803.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:03.904Z,1509694803.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:03.920Z,1509694803.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:04.303Z,1509694804.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:04.322Z,1509694804.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:04.702Z,1509694804.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:04.716Z,1509694804.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:05.092Z,1509694805.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:05.107Z,1509694805.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:05.492Z,1509694805.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:05.507Z,1509694805.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:05.895Z,1509694805.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:05.910Z,1509694805.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:06.292Z,1509694806.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:06.315Z,1509694806.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:06.694Z,1509694806.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:06.714Z,1509694806.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:07.104Z,1509694807.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:07.119Z,1509694807.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:07.501Z,1509694807.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:07.516Z,1509694807.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:07.904Z,1509694807.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:07.927Z,1509694807.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:08.290Z,1509694808.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:08.304Z,1509694808.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:08.692Z,1509694808.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:08.707Z,1509694808.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:09.095Z,1509694809.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:09.110Z,1509694809.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:09.495Z,1509694809.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:09.510Z,1509694809.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:09.904Z,1509694809.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:09.920Z,1509694809.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:10.304Z,1509694810.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:10.319Z,1509694810.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:10.704Z,1509694810.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:10.726Z,1509694810.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:11.095Z,1509694811.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:11.115Z,1509694811.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:11.492Z,1509694811.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:11.508Z,1509694811.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:11.896Z,1509694811.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:11.911Z,1509694811.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:12.293Z,1509694812.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:12.309Z,1509694812.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:12.693Z,1509694812.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:12.707Z,1509694812.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:13.105Z,1509694813.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:13.126Z,1509694813.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:13.505Z,1509694813.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:13.527Z,1509694813.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:13.904Z,1509694813.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:13.920Z,1509694813.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:14.296Z,1509694814.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:14.365Z,1509694814.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:14.691Z,1509694814.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:14.755Z,1509694814.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:15.096Z,1509694815.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:15.114Z,1509694815.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:15.496Z,1509694815.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:15.511Z,1509694815.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:15.905Z,1509694815.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:15.962Z,1509694815.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:16.305Z,1509694816.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:16.320Z,1509694816.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:16.709Z,1509694816.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:16.752Z,1509694816.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:17.093Z,1509694817.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:17.113Z,1509694817.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:17.492Z,1509694817.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:17.548Z,1509694817.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:17.880Z,1509694817.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:17.907Z,1509694817.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:18.293Z,1509694818.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:18.309Z,1509694818.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:18.692Z,1509694818.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:18.723Z,1509694818.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:19.108Z,1509694819.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:19.124Z,1509694819.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:19.505Z,1509694819.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:19.523Z,1509694819.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:19.904Z,1509694819.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:19.919Z,1509694819.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:20.283Z,1509694820.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:20.309Z,1509694820.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:20.695Z,1509694820.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:20.710Z,1509694820.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:21.093Z,1509694821.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:21.109Z,1509694821.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:21.479Z,1509694821.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:21.514Z,1509694821.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:21.905Z,1509694821.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:21.926Z,1509694821.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:22.304Z,1509694822.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:22.319Z,1509694822.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:22.710Z,1509694822.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:22.724Z,1509694822.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:23.084Z,1509694823.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:23.110Z,1509694823.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:23.485Z,1509694823.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:23.523Z,1509694823.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:23.880Z,1509694823.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:23.910Z,1509694823.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:24.288Z,1509694824.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:24.313Z,1509694824.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:24.684Z,1509694824.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:24.710Z,1509694824.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:25.109Z,1509694825.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:25.124Z,1509694825.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:25.509Z,1509694825.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:25.524Z,1509694825.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:25.904Z,1509694825.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:25.919Z,1509694825.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:26.279Z,1509694826.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:26.310Z,1509694826.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:26.687Z,1509694826.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:26.713Z,1509694826.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:27.085Z,1509694827.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:27.115Z,1509694827.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:27.484Z,1509694827.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:27.511Z,1509694827.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:27.909Z,1509694827.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:27.925Z,1509694827.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:28.309Z,1509694828.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:28.330Z,1509694828.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:28.706Z,1509694828.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:28.726Z,1509694828.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:29.088Z,1509694829.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:29.114Z,1509694829.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:29.487Z,1509694829.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:29.513Z,1509694829.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:29.887Z,1509694829.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:29.997Z,1509694829.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:30.286Z,1509694830.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:30.313Z,1509694830.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:30.687Z,1509694830.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:30.752Z,1509694830.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:31.103Z,1509694831.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:31.121Z,1509694831.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:31.502Z,1509694831.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:31.559Z,1509694831.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:31.906Z,1509694831.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:31.966Z,1509694831.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:32.286Z,1509694832.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:32.314Z,1509694832.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:32.687Z,1509694832.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:32.714Z,1509694832.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:33.098Z,1509694833.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:33.113Z,1509694833.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:33.488Z,1509694833.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:33.516Z,1509694833.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:33.906Z,1509694833.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:33.923Z,1509694833.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:34.306Z,1509694834.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:34.327Z,1509694834.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:34.704Z,1509694834.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:34.718Z,1509694834.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:35.080Z,1509694835.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:35.111Z,1509694835.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:35.487Z,1509694835.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:35.515Z,1509694835.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:35.887Z,1509694835.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:35.913Z,1509694835.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:36.288Z,1509694836.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:36.314Z,1509694836.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:36.684Z,1509694836.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:36.710Z,1509694836.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:37.101Z,1509694837.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:37.117Z,1509694837.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:37.500Z,1509694837.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:37.515Z,1509694837.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:37.905Z,1509694837.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:37.927Z,1509694837.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:38.287Z,1509694838.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:38.312Z,1509694838.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:38.687Z,1509694838.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:38.713Z,1509694838.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:39.087Z,1509694839.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:39.113Z,1509694839.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:39.487Z,1509694839.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:39.513Z,1509694839.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:39.904Z,1509694839.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:39.920Z,1509694839.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:40.306Z,1509694840.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:40.327Z,1509694840.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:40.710Z,1509694840.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:40.724Z,1509694840.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:41.087Z,1509694841.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:41.115Z,1509694841.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:41.484Z,1509694841.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:41.510Z,1509694841.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:41.887Z,1509694841.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:41.913Z,1509694841.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:42.288Z,1509694842.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:42.313Z,1509694842.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:42.684Z,1509694842.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:42.710Z,1509694842.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:43.101Z,1509694843.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:43.116Z,1509694843.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:43.509Z,1509694843.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:43.531Z,1509694843.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:43.902Z,1509694843.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:43.975Z,1509694843.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:44.287Z,1509694844.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:44.318Z,1509694844.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:44.681Z,1509694844.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:44.735Z,1509694844.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:45.085Z,1509694845.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:45.119Z,1509694845.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:45.480Z,1509694845.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:45.523Z,1509694845.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:45.906Z,1509694845.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:45.958Z,1509694845.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:46.306Z,1509694846.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:46.327Z,1509694846.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:46.710Z,1509694846.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:46.725Z,1509694846.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:47.083Z,1509694847.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:47.114Z,1509694847.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:47.484Z,1509694847.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:47.499Z,1509694847.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:47.887Z,1509694847.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:47.901Z,1509694847.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:48.292Z,1509694848.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:48.324Z,1509694848.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:48.687Z,1509694848.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:48.728Z,1509694848.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:49.093Z,1509694849.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:49.127Z,1509694849.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:49.493Z,1509694849.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:49.525Z,1509694849.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:49.901Z,1509694849.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:49.925Z,1509694849.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:50.284Z,1509694850.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:50.298Z,1509694850.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:50.684Z,1509694850.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:50.699Z,1509694850.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:51.091Z,1509694851.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:51.111Z,1509694851.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:51.484Z,1509694851.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:51.499Z,1509694851.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:51.901Z,1509694851.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:51.934Z,1509694851.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:52.301Z,1509694852.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:52.333Z,1509694852.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:52.696Z,1509694852.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:52.711Z,1509694852.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:53.084Z,1509694853.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:53.099Z,1509694853.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:53.488Z,1509694853.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:53.503Z,1509694853.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:53.892Z,1509694853.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:53.907Z,1509694853.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:54.292Z,1509694854.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:54.307Z,1509694854.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:54.687Z,1509694854.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:54.703Z,1509694854.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:55.106Z,1509694855.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:55.131Z,1509694855.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:55.506Z,1509694855.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:55.530Z,1509694855.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:55.901Z,1509694855.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:55.932Z,1509694855.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:56.291Z,1509694856.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:56.305Z,1509694856.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:56.691Z,1509694856.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:56.711Z,1509694856.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:57.089Z,1509694857.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:57.104Z,1509694857.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:57.491Z,1509694857.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:57.554Z,1509694857.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:57.905Z,1509694857.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:57.955Z,1509694857.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:40:58.330Z,1509694858.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:40:58.363Z,1509694858.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:03.606Z,1509694863.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:03.658Z,1509694863.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:03.875Z,1509694863.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:03.938Z,1509694863.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:04.245Z,1509694864.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:04.330Z,1509694864.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:04.638Z,1509694864.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:04.694Z,1509694864.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:05.037Z,1509694865.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:05.083Z,1509694865.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:05.448Z,1509694865.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:05.495Z,1509694865.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:05.849Z,1509694865.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:05.875Z,1509694865.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:06.225Z,1509694866.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:06.263Z,1509694866.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:06.624Z,1509694866.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:06.671Z,1509694866.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:07.025Z,1509694867.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:07.078Z,1509694867.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:07.427Z,1509694867.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:07.463Z,1509694867.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:07.835Z,1509694867.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:07.875Z,1509694867.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:08.248Z,1509694868.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:08.282Z,1509694868.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:08.635Z,1509694868.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:08.674Z,1509694868.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:09.024Z,1509694869.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:09.070Z,1509694869.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:09.424Z,1509694869.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:09.475Z,1509694869.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:09.825Z,1509694869.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:09.867Z,1509694869.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:10.225Z,1509694870.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:10.275Z,1509694870.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:10.624Z,1509694870.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:10.675Z,1509694870.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:11.036Z,1509694871.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:11.069Z,1509694871.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:11.439Z,1509694871.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:11.482Z,1509694871.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:11.839Z,1509694871.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:11.872Z,1509694871.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:12.225Z,1509694872.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:12.273Z,1509694872.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:12.624Z,1509694872.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:12.705Z,1509694872.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:13.036Z,1509694873.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:13.074Z,1509694873.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:13.424Z,1509694873.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:13.439Z,1509694873.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:13.836Z,1509694873.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:13.863Z,1509694873.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:14.237Z,1509694874.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:14.270Z,1509694874.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:14.638Z,1509694874.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:14.661Z,1509694874.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:15.024Z,1509694875.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:15.062Z,1509694875.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:15.423Z,1509694875.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:15.438Z,1509694875.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:15.831Z,1509694875.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:15.863Z,1509694875.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:16.227Z,1509694876.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:16.242Z,1509694876.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:16.624Z,1509694876.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:16.638Z,1509694876.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:17.037Z,1509694877.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:17.126Z,1509694877.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:17.445Z,1509694877.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:17.474Z,1509694877.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:17.837Z,1509694877.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:17.879Z,1509694877.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:18.229Z,1509694878.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:18.244Z,1509694878.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:18.623Z,1509694878.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:18.667Z,1509694878.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:19.039Z,1509694879.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:19.099Z,1509694879.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:19.431Z,1509694879.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:19.467Z,1509694879.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:19.841Z,1509694879.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:19.882Z,1509694879.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:20.237Z,1509694880.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:20.269Z,1509694880.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:20.637Z,1509694880.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:20.668Z,1509694880.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:21.024Z,1509694881.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:21.038Z,1509694881.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:21.424Z,1509694881.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:21.438Z,1509694881.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:21.831Z,1509694881.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:21.870Z,1509694881.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:22.228Z,1509694882.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:22.269Z,1509694882.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:22.631Z,1509694882.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:22.646Z,1509694882.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:23.037Z,1509694883.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:23.069Z,1509694883.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:23.438Z,1509694883.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:23.468Z,1509694883.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:23.842Z,1509694883.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:23.866Z,1509694883.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:24.224Z,1509694884.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:24.240Z,1509694884.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:24.623Z,1509694884.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:24.638Z,1509694884.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:25.032Z,1509694885.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:25.068Z,1509694885.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:25.424Z,1509694885.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:25.439Z,1509694885.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:25.837Z,1509694885.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:25.868Z,1509694885.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:26.241Z,1509694886.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:26.275Z,1509694886.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:26.642Z,1509694886.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:26.667Z,1509694886.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:27.027Z,1509694887.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:27.046Z,1509694887.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:27.428Z,1509694887.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:27.443Z,1509694887.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:27.824Z,1509694887.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:27.839Z,1509694887.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:28.228Z,1509694888.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:28.242Z,1509694888.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:28.628Z,1509694888.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:28.643Z,1509694888.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:29.037Z,1509694889.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:29.073Z,1509694889.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:29.441Z,1509694889.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:29.471Z,1509694889.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:29.842Z,1509694889.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:29.877Z,1509694889.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:30.231Z,1509694890.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:30.251Z,1509694890.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:30.623Z,1509694890.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:30.638Z,1509694890.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:31.028Z,1509694891.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:31.090Z,1509694891.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:31.428Z,1509694891.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:31.486Z,1509694891.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:31.837Z,1509694891.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:31.852Z,1509694891.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:32.245Z,1509694892.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:32.295Z,1509694892.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:32.634Z,1509694892.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:32.649Z,1509694892.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:33.031Z,1509694893.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:33.078Z,1509694893.078 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:33.078Z,1509694893.078 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 149
2017-11-03T07:41:33.079Z,1509694893.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:41:33.080Z,1509694893.080 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:33.080Z,1509694893.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 149
2017-11-03T07:41:33.081Z,1509694893.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:41:33.082Z,1509694893.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:33.082Z,1509694893.082 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 149
2017-11-03T07:41:33.083Z,1509694893.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:41:33.161Z,1509694893.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:41:33.161Z,1509694893.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:41:33.161Z,1509694893.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:41:33.430Z,1509694893.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:33.577Z,1509694893.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:41:33.577Z,1509694893.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 149
2017-11-03T07:41:33.577Z,1509694893.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:41:33.577Z,1509694893.577 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 149
2017-11-03T07:41:33.578Z,1509694893.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:41:33.578Z,1509694893.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 149
2017-11-03T07:41:33.827Z,1509694893.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:33.848Z,1509694893.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:41:33.848Z,1509694893.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:41:33.849Z,1509694893.849 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:41:33.849Z,1509694893.849 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:41:33.850Z,1509694893.850 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:41:33.850Z,1509694893.850 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:41:33.850Z,1509694893.850 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:41:33.851Z,1509694893.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:41:33.851Z,1509694893.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:41:34.230Z,1509694894.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:34.254Z,1509694894.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:41:34.255Z,1509694894.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:34.635Z,1509694894.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:34.663Z,1509694894.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:41:34.663Z,1509694894.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:35.045Z,1509694895.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:35.059Z,1509694895.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:41:35.061Z,1509694895.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:35.447Z,1509694895.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:35.466Z,1509694895.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:41:35.467Z,1509694895.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:35.845Z,1509694895.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:35.866Z,1509694895.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:41:35.867Z,1509694895.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:36.220Z,1509694896.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:36.246Z,1509694896.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:41:36.247Z,1509694896.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:36.624Z,1509694896.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:36.654Z,1509694896.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:41:36.655Z,1509694896.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:37.034Z,1509694897.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:37.049Z,1509694897.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:41:37.050Z,1509694897.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:37.420Z,1509694897.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:37.446Z,1509694897.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:41:37.447Z,1509694897.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:37.845Z,1509694897.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:37.859Z,1509694897.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:41:37.860Z,1509694897.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:38.246Z,1509694898.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:38.260Z,1509694898.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:41:38.261Z,1509694898.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:38.641Z,1509694898.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:38.656Z,1509694898.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:41:38.657Z,1509694898.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:39.034Z,1509694899.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:39.048Z,1509694899.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:41:39.049Z,1509694899.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:39.435Z,1509694899.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:39.454Z,1509694899.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:41:39.455Z,1509694899.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:39.823Z,1509694899.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:39.854Z,1509694899.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:41:39.855Z,1509694899.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:40.221Z,1509694900.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:40.254Z,1509694900.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:41:40.255Z,1509694900.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:40.624Z,1509694900.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:40.652Z,1509694900.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:41:40.653Z,1509694900.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:41.047Z,1509694901.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:41.066Z,1509694901.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:41:41.067Z,1509694901.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:41.451Z,1509694901.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:41.470Z,1509694901.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:41:41.471Z,1509694901.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:41.846Z,1509694901.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:41.861Z,1509694901.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:41:41.862Z,1509694901.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:42.225Z,1509694902.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:42.260Z,1509694902.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T07:41:42.261Z,1509694902.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:42.625Z,1509694902.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:42.653Z,1509694902.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:41:42.654Z,1509694902.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:43.028Z,1509694903.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:43.055Z,1509694903.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:41:43.057Z,1509694903.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:43.425Z,1509694903.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:43.455Z,1509694903.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:41:43.455Z,1509694903.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:43.847Z,1509694903.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:43.862Z,1509694903.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:41:43.863Z,1509694903.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:44.251Z,1509694904.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:44.266Z,1509694904.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:41:44.267Z,1509694904.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:44.646Z,1509694904.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:44.661Z,1509694904.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:41:44.662Z,1509694904.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:45.024Z,1509694905.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:45.055Z,1509694905.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:41:45.056Z,1509694905.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:45.427Z,1509694905.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:45.483Z,1509694905.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:41:45.484Z,1509694905.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:45.824Z,1509694905.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:45.878Z,1509694905.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:41:45.879Z,1509694905.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:46.227Z,1509694906.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:46.262Z,1509694906.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:41:46.263Z,1509694906.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:46.624Z,1509694906.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:46.638Z,1509694906.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:41:46.639Z,1509694906.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:47.037Z,1509694907.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:47.106Z,1509694907.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:41:47.107Z,1509694907.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:47.437Z,1509694907.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:47.467Z,1509694907.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:41:47.468Z,1509694907.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:47.837Z,1509694907.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:47.904Z,1509694907.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:41:47.905Z,1509694907.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:48.224Z,1509694908.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:48.239Z,1509694908.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:41:48.240Z,1509694908.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:48.624Z,1509694908.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:48.676Z,1509694908.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:41:48.677Z,1509694908.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:49.024Z,1509694909.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:49.040Z,1509694909.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:41:49.041Z,1509694909.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:49.424Z,1509694909.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:49.442Z,1509694909.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:41:49.443Z,1509694909.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:49.837Z,1509694909.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:49.866Z,1509694909.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:41:49.867Z,1509694909.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:50.237Z,1509694910.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:50.263Z,1509694910.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:41:50.264Z,1509694910.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:50.637Z,1509694910.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:50.661Z,1509694910.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:41:50.662Z,1509694910.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:51.023Z,1509694911.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:51.042Z,1509694911.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:41:51.043Z,1509694911.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:51.423Z,1509694911.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:51.437Z,1509694911.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:41:51.438Z,1509694911.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:51.824Z,1509694911.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:51.842Z,1509694911.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:41:51.843Z,1509694911.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:52.231Z,1509694912.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:52.269Z,1509694912.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:41:52.270Z,1509694912.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:52.623Z,1509694912.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:52.637Z,1509694912.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:41:52.638Z,1509694912.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:53.037Z,1509694913.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:53.068Z,1509694913.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T07:41:53.069Z,1509694913.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:53.437Z,1509694913.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:53.469Z,1509694913.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:53.837Z,1509694913.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:53.869Z,1509694913.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:54.224Z,1509694914.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:54.247Z,1509694914.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:54.624Z,1509694914.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:54.639Z,1509694914.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:55.024Z,1509694915.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:55.039Z,1509694915.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:55.161Z,1509694915.161 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T07:41:55.407Z,1509694915.407 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T07:41:55.407Z,1509694915.407 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T07:41:55.407Z,1509694915.407 [DropWeight](ERROR): Hardware Fault
2017-11-03T07:41:55.425Z,1509694915.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:55.440Z,1509694915.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:55.535Z,1509694915.535 [CBIT](INFO): Critical error at 20171103T074155
2017-11-03T07:41:55.537Z,1509694915.537 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T07:41:55.537Z,1509694915.537 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T07:41:55.841Z,1509694915.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:55.871Z,1509694915.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:55.963Z,1509694915.963 [CBIT](INFO): Critical error at 20171103T074155
2017-11-03T07:41:56.245Z,1509694916.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:56.275Z,1509694916.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:56.642Z,1509694916.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:56.672Z,1509694916.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:57.030Z,1509694917.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:57.051Z,1509694917.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:57.423Z,1509694917.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:57.438Z,1509694917.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:57.828Z,1509694917.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:57.843Z,1509694917.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:58.229Z,1509694918.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:58.244Z,1509694918.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:41:58.626Z,1509694918.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:41:58.642Z,1509694918.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:01.734Z,1509694921.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:01.814Z,1509694921.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:01.973Z,1509694921.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:02.015Z,1509694922.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:02.366Z,1509694922.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:02.381Z,1509694922.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:02.751Z,1509694922.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:02.816Z,1509694922.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:03.149Z,1509694923.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:03.176Z,1509694923.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:03.544Z,1509694923.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:03.587Z,1509694923.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:03.965Z,1509694923.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:04.025Z,1509694924.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:04.365Z,1509694924.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:04.380Z,1509694924.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:04.769Z,1509694924.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:04.784Z,1509694924.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:05.144Z,1509694925.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:05.172Z,1509694925.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:05.550Z,1509694925.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:05.581Z,1509694925.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:05.951Z,1509694925.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:05.981Z,1509694925.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:06.344Z,1509694926.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:06.359Z,1509694926.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:06.757Z,1509694926.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:06.789Z,1509694926.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:07.173Z,1509694927.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:07.188Z,1509694927.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:07.561Z,1509694927.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:07.595Z,1509694927.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:07.951Z,1509694927.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:07.987Z,1509694927.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:08.350Z,1509694928.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:08.389Z,1509694928.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:08.757Z,1509694928.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:08.783Z,1509694928.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:09.173Z,1509694929.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:09.188Z,1509694929.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:09.561Z,1509694929.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:09.586Z,1509694929.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:09.951Z,1509694929.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:09.987Z,1509694929.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:10.350Z,1509694930.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:10.365Z,1509694930.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:10.761Z,1509694930.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:10.788Z,1509694930.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:11.175Z,1509694931.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:11.195Z,1509694931.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:11.565Z,1509694931.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:11.598Z,1509694931.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:11.952Z,1509694931.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:11.967Z,1509694931.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:12.348Z,1509694932.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:12.363Z,1509694932.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:12.758Z,1509694932.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:12.787Z,1509694932.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:13.162Z,1509694933.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:13.190Z,1509694933.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:13.562Z,1509694933.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:13.586Z,1509694933.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:13.951Z,1509694933.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:13.966Z,1509694933.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:14.353Z,1509694934.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:14.388Z,1509694934.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:14.761Z,1509694934.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:14.791Z,1509694934.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:15.161Z,1509694935.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:15.194Z,1509694935.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:15.561Z,1509694935.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:15.588Z,1509694935.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:15.949Z,1509694935.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:16.027Z,1509694936.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:16.347Z,1509694936.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:16.361Z,1509694936.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:16.760Z,1509694936.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:16.818Z,1509694936.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:17.165Z,1509694937.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:17.197Z,1509694937.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:17.565Z,1509694937.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:17.617Z,1509694937.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:17.951Z,1509694937.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:17.997Z,1509694937.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:18.347Z,1509694938.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:18.363Z,1509694938.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:18.765Z,1509694938.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:18.795Z,1509694938.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:19.161Z,1509694939.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:19.176Z,1509694939.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:19.566Z,1509694939.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:19.596Z,1509694939.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:19.955Z,1509694939.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:19.970Z,1509694939.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:20.354Z,1509694940.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:20.369Z,1509694940.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:20.765Z,1509694940.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:20.797Z,1509694940.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:21.165Z,1509694941.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:21.196Z,1509694941.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:21.561Z,1509694941.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:21.575Z,1509694941.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:21.952Z,1509694941.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:21.967Z,1509694941.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:22.351Z,1509694942.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:22.366Z,1509694942.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:22.761Z,1509694942.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:22.776Z,1509694942.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:23.165Z,1509694943.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:23.196Z,1509694943.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:23.565Z,1509694943.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:23.596Z,1509694943.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:23.955Z,1509694943.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:23.970Z,1509694943.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:24.352Z,1509694944.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:24.374Z,1509694944.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:24.766Z,1509694944.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:24.796Z,1509694944.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:25.161Z,1509694945.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:25.196Z,1509694945.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:25.566Z,1509694945.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:25.596Z,1509694945.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:25.952Z,1509694945.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:25.968Z,1509694945.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:26.355Z,1509694946.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:26.374Z,1509694946.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:26.765Z,1509694946.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:26.796Z,1509694946.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:27.161Z,1509694947.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:27.176Z,1509694947.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:27.557Z,1509694947.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:27.590Z,1509694947.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:27.945Z,1509694947.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:27.967Z,1509694947.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:28.347Z,1509694948.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:28.367Z,1509694948.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:28.765Z,1509694948.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:28.794Z,1509694948.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:29.162Z,1509694949.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:29.179Z,1509694949.179 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T07:42:29.179Z,1509694949.179 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:42:29.179Z,1509694949.179 [BPC1](ERROR): Data Fault
2017-11-03T07:42:29.187Z,1509694949.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:29.289Z,1509694949.289 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:42:29.575Z,1509694949.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:29.599Z,1509694949.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:29.949Z,1509694949.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:29.964Z,1509694949.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:30.348Z,1509694950.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:30.363Z,1509694950.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:30.461Z,1509694950.461 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:42:30.461Z,1509694950.461 [BPC1] No Fault, FailCount= 1
2017-11-03T07:42:30.766Z,1509694950.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:30.844Z,1509694950.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:31.161Z,1509694951.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:31.187Z,1509694951.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:31.562Z,1509694951.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:31.639Z,1509694951.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:31.949Z,1509694951.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:31.965Z,1509694951.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:32.348Z,1509694952.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:32.363Z,1509694952.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:32.761Z,1509694952.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:32.786Z,1509694952.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:33.161Z,1509694953.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:33.187Z,1509694953.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:33.561Z,1509694953.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:33.589Z,1509694953.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:33.952Z,1509694953.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:33.967Z,1509694953.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:34.348Z,1509694954.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:34.363Z,1509694954.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:34.762Z,1509694954.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:34.793Z,1509694954.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:35.162Z,1509694955.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:35.186Z,1509694955.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:35.562Z,1509694955.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:35.586Z,1509694955.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:35.951Z,1509694955.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:35.966Z,1509694955.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:36.347Z,1509694956.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:36.367Z,1509694956.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:36.761Z,1509694956.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:36.801Z,1509694956.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:37.161Z,1509694957.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:37.190Z,1509694957.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:37.561Z,1509694957.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:37.587Z,1509694957.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:37.951Z,1509694957.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:37.966Z,1509694957.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:38.347Z,1509694958.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:38.362Z,1509694958.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:38.761Z,1509694958.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:38.785Z,1509694958.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:39.162Z,1509694959.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:39.185Z,1509694959.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:39.561Z,1509694959.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:39.594Z,1509694959.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:39.949Z,1509694959.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:39.965Z,1509694959.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:40.347Z,1509694960.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:40.363Z,1509694960.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:40.761Z,1509694960.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:40.792Z,1509694960.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:41.161Z,1509694961.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:41.186Z,1509694961.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:41.562Z,1509694961.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:41.585Z,1509694961.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:41.949Z,1509694961.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:41.990Z,1509694961.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:42.355Z,1509694962.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:42.387Z,1509694962.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:42.761Z,1509694962.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:42.789Z,1509694962.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:43.161Z,1509694963.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:43.207Z,1509694963.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:43.561Z,1509694963.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:43.611Z,1509694963.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:43.952Z,1509694963.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:43.967Z,1509694963.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:44.354Z,1509694964.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:44.403Z,1509694964.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:44.761Z,1509694964.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:44.792Z,1509694964.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:45.169Z,1509694965.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:45.223Z,1509694965.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:45.565Z,1509694965.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:45.615Z,1509694965.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:45.948Z,1509694965.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:45.963Z,1509694965.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:46.351Z,1509694966.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:46.371Z,1509694966.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:46.761Z,1509694966.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:46.793Z,1509694966.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:47.169Z,1509694967.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:47.199Z,1509694967.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:47.561Z,1509694967.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:47.593Z,1509694967.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:47.951Z,1509694967.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:47.966Z,1509694967.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:48.354Z,1509694968.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:48.391Z,1509694968.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:48.762Z,1509694968.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:48.777Z,1509694968.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:49.161Z,1509694969.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:49.176Z,1509694969.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:49.560Z,1509694969.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:49.575Z,1509694969.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:49.957Z,1509694969.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:49.972Z,1509694969.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:50.353Z,1509694970.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:50.367Z,1509694970.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:50.761Z,1509694970.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:50.783Z,1509694970.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:51.162Z,1509694971.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:51.177Z,1509694971.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:51.562Z,1509694971.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:51.577Z,1509694971.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:51.959Z,1509694971.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:51.974Z,1509694971.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:52.355Z,1509694972.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:52.371Z,1509694972.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:52.761Z,1509694972.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:52.777Z,1509694972.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:53.165Z,1509694973.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:53.187Z,1509694973.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:53.562Z,1509694973.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:53.578Z,1509694973.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:53.958Z,1509694973.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:53.979Z,1509694973.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:54.358Z,1509694974.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:54.373Z,1509694974.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:54.763Z,1509694974.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:54.783Z,1509694974.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:55.165Z,1509694975.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:55.179Z,1509694975.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:55.562Z,1509694975.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:55.577Z,1509694975.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:55.958Z,1509694975.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:55.973Z,1509694975.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:56.358Z,1509694976.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:56.373Z,1509694976.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:56.762Z,1509694976.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:56.777Z,1509694976.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:57.165Z,1509694977.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:57.181Z,1509694977.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:57.561Z,1509694977.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:57.641Z,1509694977.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:57.959Z,1509694977.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:57.974Z,1509694977.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:58.356Z,1509694978.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:58.371Z,1509694978.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:42:58.769Z,1509694978.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:42:58.817Z,1509694978.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:01.841Z,1509694981.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:01.864Z,1509694981.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:02.013Z,1509694982.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:02.074Z,1509694982.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:02.403Z,1509694982.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:02.459Z,1509694982.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:02.791Z,1509694982.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:02.823Z,1509694982.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:03.193Z,1509694983.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:03.219Z,1509694983.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:03.592Z,1509694983.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:03.622Z,1509694983.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:04.014Z,1509694984.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:04.031Z,1509694984.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:04.413Z,1509694984.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:04.428Z,1509694984.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:04.810Z,1509694984.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:04.824Z,1509694984.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:05.189Z,1509694985.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:05.216Z,1509694985.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:05.593Z,1509694985.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:05.624Z,1509694985.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:05.988Z,1509694985.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:06.003Z,1509694986.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:06.395Z,1509694986.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:06.426Z,1509694986.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:06.805Z,1509694986.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:06.835Z,1509694986.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:07.205Z,1509694987.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:07.234Z,1509694987.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:07.606Z,1509694987.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:07.630Z,1509694987.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:07.993Z,1509694987.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:08.031Z,1509694988.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:08.396Z,1509694988.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:08.410Z,1509694988.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:08.805Z,1509694988.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:08.843Z,1509694988.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:09.209Z,1509694989.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:09.239Z,1509694989.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:09.605Z,1509694989.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:09.639Z,1509694989.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:09.992Z,1509694989.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:10.007Z,1509694990.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:10.399Z,1509694990.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:10.438Z,1509694990.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:10.796Z,1509694990.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:10.838Z,1509694990.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:11.193Z,1509694991.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:11.207Z,1509694991.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:11.598Z,1509694991.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:11.641Z,1509694991.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:12.005Z,1509694992.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:12.041Z,1509694992.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:12.409Z,1509694992.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:12.433Z,1509694992.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:12.809Z,1509694992.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:12.835Z,1509694992.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:13.199Z,1509694993.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:13.213Z,1509694993.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:13.595Z,1509694993.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:13.610Z,1509694993.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:13.996Z,1509694993.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:14.011Z,1509694994.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:14.392Z,1509694994.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:14.485Z,1509694994.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:14.802Z,1509694994.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:14.817Z,1509694994.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:15.209Z,1509694995.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:15.271Z,1509694995.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:15.610Z,1509694995.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:15.638Z,1509694995.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:15.997Z,1509694995.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:16.047Z,1509694996.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:16.396Z,1509694996.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:16.454Z,1509694996.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:16.796Z,1509694996.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:16.811Z,1509694996.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:17.198Z,1509694997.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:17.214Z,1509694997.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:17.597Z,1509694997.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:17.612Z,1509694997.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:18.009Z,1509694998.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:18.041Z,1509694998.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:18.409Z,1509694998.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:18.440Z,1509694998.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:18.802Z,1509694998.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:18.817Z,1509694998.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:19.200Z,1509694999.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:19.214Z,1509694999.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:19.596Z,1509694999.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:19.612Z,1509694999.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:20.002Z,1509695000.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:20.021Z,1509695000.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:20.400Z,1509695000.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:20.422Z,1509695000.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:20.804Z,1509695000.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:20.820Z,1509695000.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:21.209Z,1509695001.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:21.228Z,1509695001.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:21.605Z,1509695001.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:21.625Z,1509695001.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:21.995Z,1509695001.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:22.010Z,1509695002.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:22.401Z,1509695002.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:22.415Z,1509695002.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:22.800Z,1509695002.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:22.815Z,1509695002.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:23.202Z,1509695003.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:23.221Z,1509695003.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:23.601Z,1509695003.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:23.616Z,1509695003.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:24.006Z,1509695004.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:24.021Z,1509695004.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:24.378Z,1509695004.378 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T07:43:24.378Z,1509695004.378 [NAL9602] Data Fault, FailCount= 1
2017-11-03T07:43:24.378Z,1509695004.378 [NAL9602](ERROR): Data Fault
2017-11-03T07:43:24.410Z,1509695004.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:24.435Z,1509695004.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:24.525Z,1509695004.525 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T07:43:24.777Z,1509695004.777 [NAL9602](INFO): Powering down
2017-11-03T07:43:24.809Z,1509695004.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:24.827Z,1509695004.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:25.200Z,1509695005.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:25.215Z,1509695005.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:25.588Z,1509695005.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:25.623Z,1509695005.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:25.733Z,1509695005.733 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T07:43:25.733Z,1509695005.733 [NAL9602] No Fault, FailCount= 1
2017-11-03T07:43:25.990Z,1509695005.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:26.022Z,1509695006.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:26.401Z,1509695006.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:26.420Z,1509695006.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:26.801Z,1509695006.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:26.817Z,1509695006.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:27.201Z,1509695007.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:27.216Z,1509695007.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:27.600Z,1509695007.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:27.618Z,1509695007.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:27.988Z,1509695007.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:28.043Z,1509695008.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:28.394Z,1509695008.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:28.439Z,1509695008.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:28.792Z,1509695008.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:28.825Z,1509695008.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:29.193Z,1509695009.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:29.250Z,1509695009.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:29.594Z,1509695009.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:29.623Z,1509695009.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:29.995Z,1509695009.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:30.066Z,1509695010.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:30.393Z,1509695010.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:30.451Z,1509695010.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:30.793Z,1509695010.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:30.820Z,1509695010.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:31.195Z,1509695011.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:31.223Z,1509695011.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:31.594Z,1509695011.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:31.619Z,1509695011.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:31.993Z,1509695011.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:32.020Z,1509695012.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:32.392Z,1509695012.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:32.429Z,1509695012.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:32.789Z,1509695012.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:32.821Z,1509695012.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:33.189Z,1509695013.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:33.203Z,1509695013.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:33.593Z,1509695013.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:33.623Z,1509695013.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:33.989Z,1509695013.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:34.004Z,1509695014.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:34.391Z,1509695014.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:34.406Z,1509695014.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:34.793Z,1509695014.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:34.808Z,1509695014.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:35.191Z,1509695015.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:35.207Z,1509695015.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:35.594Z,1509695015.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:35.610Z,1509695015.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:35.991Z,1509695015.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:36.007Z,1509695016.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:36.391Z,1509695016.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:36.406Z,1509695016.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:36.791Z,1509695016.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:36.805Z,1509695016.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:37.191Z,1509695017.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:37.211Z,1509695017.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:37.591Z,1509695017.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:37.606Z,1509695017.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:37.991Z,1509695017.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:38.005Z,1509695018.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:38.089Z,1509695018.089 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:43:38.089Z,1509695018.089 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T07:43:38.304Z,1509695018.304 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:43:38.305Z,1509695018.305 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:43:38.305Z,1509695018.305 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:43:38.305Z,1509695018.305 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:43:38.395Z,1509695018.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:38.410Z,1509695018.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:38.791Z,1509695018.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:38.806Z,1509695018.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:39.191Z,1509695019.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:39.211Z,1509695019.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:39.591Z,1509695019.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:39.611Z,1509695019.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:39.991Z,1509695019.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:40.007Z,1509695020.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:40.391Z,1509695020.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:40.406Z,1509695020.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:40.799Z,1509695020.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:40.838Z,1509695020.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:41.191Z,1509695021.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:41.206Z,1509695021.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:41.598Z,1509695021.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:41.613Z,1509695021.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:41.996Z,1509695021.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:42.011Z,1509695022.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:42.429Z,1509695022.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:42.544Z,1509695022.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:42.546Z,1509695022.546 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:43:42.659Z,1509695022.659 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:43:42.660Z,1509695022.660 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:43:42.661Z,1509695022.661 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:43:42.662Z,1509695022.662 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:43:42.793Z,1509695022.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:42.844Z,1509695022.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:43.195Z,1509695023.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:43.221Z,1509695023.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:43.625Z,1509695023.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:43.711Z,1509695023.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:43.994Z,1509695023.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:44.038Z,1509695024.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:44.392Z,1509695024.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:44.462Z,1509695024.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:44.788Z,1509695024.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:44.839Z,1509695024.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:45.195Z,1509695025.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:45.219Z,1509695025.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:45.593Z,1509695025.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:45.627Z,1509695025.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:45.994Z,1509695025.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:46.019Z,1509695026.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:46.394Z,1509695026.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:46.419Z,1509695026.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:46.815Z,1509695026.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:46.835Z,1509695026.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:47.189Z,1509695027.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:47.219Z,1509695027.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:47.594Z,1509695027.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:47.625Z,1509695027.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:47.991Z,1509695027.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:48.026Z,1509695028.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:48.388Z,1509695028.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:48.403Z,1509695028.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:48.800Z,1509695028.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:48.836Z,1509695028.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:49.193Z,1509695029.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:49.208Z,1509695029.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:49.591Z,1509695029.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:49.606Z,1509695029.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:49.993Z,1509695029.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:50.007Z,1509695030.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:50.396Z,1509695030.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:50.429Z,1509695030.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:50.807Z,1509695030.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:50.842Z,1509695030.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:51.195Z,1509695031.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:51.210Z,1509695031.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:51.595Z,1509695031.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:51.610Z,1509695031.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:51.000Z,1509695032.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:52.034Z,1509695032.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:52.399Z,1509695032.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:52.413Z,1509695032.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:52.814Z,1509695032.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:52.859Z,1509695032.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:53.199Z,1509695033.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:53.215Z,1509695033.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:53.596Z,1509695033.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:53.614Z,1509695033.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:53.995Z,1509695033.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:54.011Z,1509695034.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:54.395Z,1509695034.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:54.411Z,1509695034.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:54.807Z,1509695034.807 [NAL9602](INFO): Powering up NAL9602
2017-11-03T07:43:54.844Z,1509695034.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:54.899Z,1509695034.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:55.196Z,1509695035.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:55.242Z,1509695035.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:55.595Z,1509695035.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:55.611Z,1509695035.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:55.995Z,1509695035.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:56.009Z,1509695036.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:56.396Z,1509695036.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:56.411Z,1509695036.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:56.795Z,1509695036.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:56.862Z,1509695036.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:57.193Z,1509695037.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:57.208Z,1509695037.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:57.595Z,1509695037.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:57.611Z,1509695037.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:57.994Z,1509695037.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:58.010Z,1509695038.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:58.395Z,1509695038.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:58.411Z,1509695038.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:43:58.418Z,1509695038.418 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T07:38:58.1Z
2017-11-03T07:43:58.418Z,1509695038.418 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T07:43:58.418Z,1509695038.418 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T07:43:58.796Z,1509695038.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:43:58.810Z,1509695038.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:02.265Z,1509695042.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:02.282Z,1509695042.282 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:44:02.282Z,1509695042.282 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:44:02.282Z,1509695042.282 [BPC1](ERROR): Communications Fault
2017-11-03T07:44:02.290Z,1509695042.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:02.381Z,1509695042.381 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:44:02.391Z,1509695042.391 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171103T001125/Courier0176.lzma
2017-11-03T07:44:02.412Z,1509695042.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:02.462Z,1509695042.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:02.821Z,1509695042.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:02.849Z,1509695042.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:03.195Z,1509695043.195 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0176.lzma.bak
2017-11-03T07:44:03.195Z,1509695043.195 [DataOverHttps](INFO): SBD MOMSN=5183049
2017-11-03T07:44:03.219Z,1509695043.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:03.266Z,1509695043.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:03.369Z,1509695043.369 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:44:03.369Z,1509695043.369 [BPC1] No Fault, FailCount= 1
2017-11-03T07:44:03.831Z,1509695043.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:03.901Z,1509695043.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:04.051Z,1509695044.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:04.067Z,1509695044.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:07.450Z,1509695047.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:07.510Z,1509695047.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:07.654Z,1509695047.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:07.669Z,1509695047.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:08.019Z,1509695048.019 [NAL9602](INFO): NAL9602 initialized
2017-11-03T07:44:08.049Z,1509695048.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:08.064Z,1509695048.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:08.431Z,1509695048.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:08.474Z,1509695048.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:08.873Z,1509695048.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:08.880Z,1509695048.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x52722 got:0x19591
2017-11-03T07:44:08.910Z,1509695048.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:09.254Z,1509695049.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:09.275Z,1509695049.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:12.446Z,1509695052.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:12.462Z,1509695052.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:12.578Z,1509695052.578 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171103T001125/Express0177.lzma
2017-11-03T07:44:12.617Z,1509695052.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:12.658Z,1509695052.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:13.010Z,1509695053.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:13.031Z,1509695053.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:13.367Z,1509695053.367 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0177.lzma.bak
2017-11-03T07:44:13.367Z,1509695053.367 [DataOverHttps](INFO): SBD MOMSN=5183053
2017-11-03T07:44:13.419Z,1509695053.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:13.447Z,1509695053.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:14.032Z,1509695054.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:14.047Z,1509695054.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:14.066Z,1509695054.066 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T07:44:14.066Z,1509695054.066 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T07:44:14.066Z,1509695054.066 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T07:44:14.191Z,1509695054.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:14.220Z,1509695054.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:17.489Z,1509695057.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:17.520Z,1509695057.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:17.652Z,1509695057.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:17.681Z,1509695057.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:18.076Z,1509695058.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:18.138Z,1509695058.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:18.477Z,1509695058.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:18.492Z,1509695058.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:18.876Z,1509695058.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:18.891Z,1509695058.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:19.261Z,1509695059.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:19.277Z,1509695059.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:19.666Z,1509695059.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:19.723Z,1509695059.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:20.060Z,1509695060.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:20.079Z,1509695060.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:20.466Z,1509695060.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:20.523Z,1509695060.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:20.867Z,1509695060.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:20.887Z,1509695060.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:21.271Z,1509695061.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:21.323Z,1509695061.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:21.663Z,1509695061.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:21.679Z,1509695061.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:22.051Z,1509695062.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:22.087Z,1509695062.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:22.452Z,1509695062.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:22.478Z,1509695062.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:22.857Z,1509695062.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:22.913Z,1509695062.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:23.256Z,1509695063.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:23.275Z,1509695063.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:23.665Z,1509695063.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:23.680Z,1509695063.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:24.065Z,1509695064.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:24.080Z,1509695064.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:24.466Z,1509695064.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:24.487Z,1509695064.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:24.853Z,1509695064.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:24.875Z,1509695064.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:25.254Z,1509695065.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:25.275Z,1509695065.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:25.699Z,1509695065.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:25.734Z,1509695065.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:26.054Z,1509695066.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:26.073Z,1509695066.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:26.465Z,1509695066.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:26.550Z,1509695066.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:26.869Z,1509695066.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:26.901Z,1509695066.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:27.345Z,1509695067.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:27.377Z,1509695067.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:27.658Z,1509695067.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:27.673Z,1509695067.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:28.059Z,1509695068.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:28.079Z,1509695068.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:28.455Z,1509695068.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:28.470Z,1509695068.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:28.856Z,1509695068.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:28.871Z,1509695068.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:29.296Z,1509695069.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:29.350Z,1509695069.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:29.673Z,1509695069.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:29.703Z,1509695069.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:30.065Z,1509695070.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:30.081Z,1509695070.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:30.465Z,1509695070.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:30.481Z,1509695070.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:30.858Z,1509695070.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:30.873Z,1509695070.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:31.262Z,1509695071.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:31.277Z,1509695071.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:31.661Z,1509695071.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:31.676Z,1509695071.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:32.060Z,1509695072.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:32.124Z,1509695072.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:32.466Z,1509695072.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:32.481Z,1509695072.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:32.865Z,1509695072.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:32.880Z,1509695072.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:33.273Z,1509695073.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:33.303Z,1509695073.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:33.659Z,1509695073.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:33.722Z,1509695073.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:34.064Z,1509695074.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:34.087Z,1509695074.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:34.087Z,1509695074.087 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 150
2017-11-03T07:44:34.087Z,1509695074.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:44:34.109Z,1509695074.109 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:34.109Z,1509695074.109 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 150
2017-11-03T07:44:34.109Z,1509695074.109 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:44:34.111Z,1509695074.111 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:34.111Z,1509695074.111 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 150
2017-11-03T07:44:34.111Z,1509695074.111 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:44:34.201Z,1509695074.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:44:34.202Z,1509695074.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:44:34.202Z,1509695074.202 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:44:34.464Z,1509695074.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:34.609Z,1509695074.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:44:34.609Z,1509695074.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 150
2017-11-03T07:44:34.610Z,1509695074.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:44:34.610Z,1509695074.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 150
2017-11-03T07:44:34.610Z,1509695074.610 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:44:34.610Z,1509695074.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 150
2017-11-03T07:44:34.868Z,1509695074.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:34.882Z,1509695074.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:44:34.883Z,1509695074.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:44:34.883Z,1509695074.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:44:34.883Z,1509695074.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:44:34.884Z,1509695074.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:44:34.884Z,1509695074.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:44:34.885Z,1509695074.885 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:44:34.885Z,1509695074.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:44:34.885Z,1509695074.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:44:35.261Z,1509695075.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:35.314Z,1509695075.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:35.673Z,1509695075.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:35.723Z,1509695075.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:36.072Z,1509695076.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:36.087Z,1509695076.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:36.474Z,1509695076.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:36.489Z,1509695076.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:36.875Z,1509695076.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:36.896Z,1509695076.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:37.267Z,1509695077.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:37.282Z,1509695077.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:37.666Z,1509695077.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:37.682Z,1509695077.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:38.066Z,1509695078.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:38.082Z,1509695078.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:38.469Z,1509695078.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:38.485Z,1509695078.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:38.874Z,1509695078.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:38.889Z,1509695078.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:39.271Z,1509695079.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:39.287Z,1509695079.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:39.660Z,1509695079.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:39.679Z,1509695079.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:40.064Z,1509695080.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:40.087Z,1509695080.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:40.465Z,1509695080.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:40.481Z,1509695080.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:40.873Z,1509695080.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:40.888Z,1509695080.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:41.278Z,1509695081.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:41.345Z,1509695081.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:41.713Z,1509695081.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:41.729Z,1509695081.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:42.066Z,1509695082.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:42.087Z,1509695082.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:42.469Z,1509695082.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:42.491Z,1509695082.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:42.857Z,1509695082.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:42.877Z,1509695082.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:43.274Z,1509695083.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:43.328Z,1509695083.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:43.658Z,1509695083.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:43.689Z,1509695083.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:44.060Z,1509695084.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:44.083Z,1509695084.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:44.465Z,1509695084.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:44.486Z,1509695084.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:44.869Z,1509695084.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:44.891Z,1509695084.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:45.266Z,1509695085.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:45.295Z,1509695085.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:45.657Z,1509695085.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:45.671Z,1509695085.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:46.058Z,1509695086.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:46.107Z,1509695086.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:46.455Z,1509695086.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:46.491Z,1509695086.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:46.862Z,1509695086.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:46.893Z,1509695086.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:47.259Z,1509695087.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:47.274Z,1509695087.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:47.669Z,1509695087.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:47.700Z,1509695087.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:48.069Z,1509695088.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:48.138Z,1509695088.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:48.466Z,1509695088.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:48.500Z,1509695088.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:48.868Z,1509695088.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:48.919Z,1509695088.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:49.256Z,1509695089.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:49.275Z,1509695089.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:49.659Z,1509695089.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:49.711Z,1509695089.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:50.055Z,1509695090.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:50.110Z,1509695090.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:50.469Z,1509695090.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:50.500Z,1509695090.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:50.894Z,1509695090.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:50.915Z,1509695090.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:51.269Z,1509695091.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:51.301Z,1509695091.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:51.658Z,1509695091.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:51.673Z,1509695091.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:52.059Z,1509695092.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:52.074Z,1509695092.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:52.453Z,1509695092.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:52.468Z,1509695092.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:52.857Z,1509695092.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:52.872Z,1509695092.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:53.263Z,1509695093.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:53.278Z,1509695093.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:53.669Z,1509695093.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:53.700Z,1509695093.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:54.069Z,1509695094.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:54.100Z,1509695094.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:54.469Z,1509695094.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:54.501Z,1509695094.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:54.854Z,1509695094.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:54.869Z,1509695094.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:55.308Z,1509695095.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:55.363Z,1509695095.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:55.653Z,1509695095.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:55.668Z,1509695095.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:56.059Z,1509695096.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:56.079Z,1509695096.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:56.469Z,1509695096.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:56.500Z,1509695096.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:56.869Z,1509695096.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:56.901Z,1509695096.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:57.322Z,1509695097.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:57.361Z,1509695097.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:57.656Z,1509695097.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:57.671Z,1509695097.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:58.059Z,1509695098.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:58.074Z,1509695098.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:58.460Z,1509695098.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:58.475Z,1509695098.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:58.861Z,1509695098.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:58.876Z,1509695098.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:59.256Z,1509695099.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:59.271Z,1509695099.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:44:59.670Z,1509695099.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:44:59.705Z,1509695099.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:00.074Z,1509695100.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:00.103Z,1509695100.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:00.469Z,1509695100.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:00.520Z,1509695100.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:00.860Z,1509695100.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:00.875Z,1509695100.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:01.258Z,1509695101.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:01.273Z,1509695101.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:01.659Z,1509695101.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:01.674Z,1509695101.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:02.055Z,1509695102.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:02.071Z,1509695102.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:02.469Z,1509695102.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:02.523Z,1509695102.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:02.866Z,1509695102.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:02.887Z,1509695102.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:03.273Z,1509695103.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:03.323Z,1509695103.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:03.659Z,1509695103.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:03.679Z,1509695103.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:04.059Z,1509695104.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:04.107Z,1509695104.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:04.464Z,1509695104.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:04.511Z,1509695104.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:04.876Z,1509695104.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:04.907Z,1509695104.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:05.260Z,1509695105.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:05.275Z,1509695105.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:05.666Z,1509695105.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:05.681Z,1509695105.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:06.070Z,1509695106.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:06.085Z,1509695106.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:06.469Z,1509695106.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:06.483Z,1509695106.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:06.860Z,1509695106.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:06.875Z,1509695106.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:07.258Z,1509695107.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:07.273Z,1509695107.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:07.655Z,1509695107.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:07.686Z,1509695107.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:08.062Z,1509695108.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:08.077Z,1509695108.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:08.465Z,1509695108.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:08.481Z,1509695108.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:08.865Z,1509695108.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:08.880Z,1509695108.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:09.289Z,1509695109.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:09.347Z,1509695109.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:09.655Z,1509695109.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:09.681Z,1509695109.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:10.052Z,1509695110.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:10.078Z,1509695110.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:10.452Z,1509695110.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:10.478Z,1509695110.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:10.856Z,1509695110.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:10.881Z,1509695110.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:11.279Z,1509695111.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:11.321Z,1509695111.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:11.674Z,1509695111.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:11.689Z,1509695111.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:12.074Z,1509695112.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:12.089Z,1509695112.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:12.476Z,1509695112.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:12.498Z,1509695112.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:12.854Z,1509695112.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:12.889Z,1509695112.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:13.253Z,1509695113.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:13.284Z,1509695113.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:13.654Z,1509695113.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:13.697Z,1509695113.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:14.057Z,1509695114.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:14.072Z,1509695114.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:14.470Z,1509695114.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:14.494Z,1509695114.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:17.687Z,1509695117.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:17.762Z,1509695117.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:17.918Z,1509695117.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:17.944Z,1509695117.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:18.300Z,1509695118.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:18.358Z,1509695118.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:18.700Z,1509695118.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:18.715Z,1509695118.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:19.098Z,1509695119.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:19.147Z,1509695119.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:19.510Z,1509695119.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:19.555Z,1509695119.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:19.908Z,1509695119.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:19.923Z,1509695119.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:20.308Z,1509695120.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:20.331Z,1509695120.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:20.703Z,1509695120.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:20.722Z,1509695120.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:21.109Z,1509695121.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:21.123Z,1509695121.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:21.507Z,1509695121.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:21.522Z,1509695121.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:21.907Z,1509695121.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:21.922Z,1509695121.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:22.307Z,1509695122.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:22.323Z,1509695122.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:22.710Z,1509695122.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:22.726Z,1509695122.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:23.114Z,1509695123.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:23.129Z,1509695123.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:23.509Z,1509695123.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:23.524Z,1509695123.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:23.904Z,1509695123.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:23.920Z,1509695123.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:24.302Z,1509695124.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:24.318Z,1509695124.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:24.706Z,1509695124.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:24.722Z,1509695124.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:25.104Z,1509695125.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:25.119Z,1509695125.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:25.507Z,1509695125.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:25.527Z,1509695125.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:25.909Z,1509695125.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:25.930Z,1509695125.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:26.307Z,1509695126.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:26.327Z,1509695126.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:26.741Z,1509695126.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:26.803Z,1509695126.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:27.107Z,1509695127.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:27.126Z,1509695127.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:27.506Z,1509695127.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:27.527Z,1509695127.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:27.905Z,1509695127.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:27.920Z,1509695127.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:28.307Z,1509695128.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:28.326Z,1509695128.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:28.727Z,1509695128.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:28.775Z,1509695128.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:29.116Z,1509695129.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:29.131Z,1509695129.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:29.516Z,1509695129.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:29.538Z,1509695129.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:29.904Z,1509695129.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:29.919Z,1509695129.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:30.297Z,1509695130.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:30.367Z,1509695130.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:30.693Z,1509695130.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:30.788Z,1509695130.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:31.107Z,1509695131.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:31.162Z,1509695131.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:31.517Z,1509695131.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:31.531Z,1509695131.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:31.913Z,1509695131.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:31.963Z,1509695131.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:32.313Z,1509695132.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:32.370Z,1509695132.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:32.704Z,1509695132.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:32.722Z,1509695132.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:33.100Z,1509695133.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:33.115Z,1509695133.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:33.503Z,1509695133.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:33.535Z,1509695133.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:33.899Z,1509695133.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:33.914Z,1509695133.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:34.295Z,1509695134.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:34.310Z,1509695134.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:34.709Z,1509695134.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:34.739Z,1509695134.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:35.123Z,1509695135.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:35.138Z,1509695135.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:35.509Z,1509695135.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:35.534Z,1509695135.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:35.896Z,1509695135.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:35.935Z,1509695135.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:36.296Z,1509695136.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:36.335Z,1509695136.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:36.698Z,1509695136.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:36.713Z,1509695136.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:37.097Z,1509695137.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:37.112Z,1509695137.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:37.513Z,1509695137.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:37.543Z,1509695137.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:37.925Z,1509695137.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:37.940Z,1509695137.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:38.314Z,1509695138.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:38.343Z,1509695138.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:38.703Z,1509695138.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:38.735Z,1509695138.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:38.904Z,1509695138.904 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:45:38.904Z,1509695138.904 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T07:45:38.904Z,1509695138.904 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:45:39.103Z,1509695139.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:39.117Z,1509695139.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:45:39.118Z,1509695139.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:39.233Z,1509695139.233 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:45:39.309Z,1509695139.309 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:45:39.410Z,1509695139.410 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:45:39.501Z,1509695139.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:39.519Z,1509695139.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:45:39.537Z,1509695139.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:39.901Z,1509695139.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:39.917Z,1509695139.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:45:39.918Z,1509695139.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:40.297Z,1509695140.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:40.311Z,1509695140.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:45:40.313Z,1509695140.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:40.714Z,1509695140.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:40.743Z,1509695140.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:45:40.744Z,1509695140.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:40.829Z,1509695140.829 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:45:40.829Z,1509695140.829 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T07:45:41.026Z,1509695141.026 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:45:41.026Z,1509695141.026 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:45:41.026Z,1509695141.026 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:45:41.026Z,1509695141.026 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:45:41.133Z,1509695141.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:41.148Z,1509695141.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:45:41.149Z,1509695141.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:41.513Z,1509695141.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:41.545Z,1509695141.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:45:41.546Z,1509695141.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:41.908Z,1509695141.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:41.924Z,1509695141.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:45:41.925Z,1509695141.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:42.303Z,1509695142.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:42.319Z,1509695142.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:45:42.320Z,1509695142.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:42.706Z,1509695142.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:42.785Z,1509695142.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:45:42.785Z,1509695142.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:43.102Z,1509695143.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:43.117Z,1509695143.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:45:43.118Z,1509695143.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:43.509Z,1509695143.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:43.525Z,1509695143.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:45:43.526Z,1509695143.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:43.917Z,1509695143.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:43.959Z,1509695143.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:45:43.960Z,1509695143.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:44.318Z,1509695144.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:44.346Z,1509695144.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:45:44.347Z,1509695144.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:44.704Z,1509695144.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:44.753Z,1509695144.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:45:44.754Z,1509695144.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:45.149Z,1509695145.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:45.197Z,1509695145.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T07:45:45.198Z,1509695145.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:45.270Z,1509695145.270 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:45:45.344Z,1509695145.344 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:45:45.345Z,1509695145.345 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:45:45.346Z,1509695145.346 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:45:45.347Z,1509695145.347 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:45:45.496Z,1509695145.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:45.515Z,1509695145.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:45:45.516Z,1509695145.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:45.903Z,1509695145.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:45.920Z,1509695145.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:46.300Z,1509695146.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:46.316Z,1509695146.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:46.714Z,1509695146.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:46.745Z,1509695146.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:47.113Z,1509695147.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:47.145Z,1509695147.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:47.509Z,1509695147.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:47.524Z,1509695147.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:47.899Z,1509695147.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:47.915Z,1509695147.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:48.299Z,1509695148.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:48.315Z,1509695148.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:48.703Z,1509695148.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:48.719Z,1509695148.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:49.094Z,1509695149.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:49.109Z,1509695149.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:49.513Z,1509695149.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:49.544Z,1509695149.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:49.914Z,1509695149.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:49.945Z,1509695149.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:50.308Z,1509695150.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:50.324Z,1509695150.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:50.699Z,1509695150.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:50.715Z,1509695150.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:51.103Z,1509695151.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:51.119Z,1509695151.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:51.503Z,1509695151.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:51.519Z,1509695151.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:51.912Z,1509695151.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:51.947Z,1509695151.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:52.320Z,1509695152.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:52.350Z,1509695152.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:52.714Z,1509695152.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:52.744Z,1509695152.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:53.113Z,1509695153.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:53.144Z,1509695153.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:53.513Z,1509695153.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:53.543Z,1509695153.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:53.895Z,1509695153.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:53.911Z,1509695153.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:54.300Z,1509695154.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:54.315Z,1509695154.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:54.709Z,1509695154.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:54.793Z,1509695154.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:55.096Z,1509695155.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:55.111Z,1509695155.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:55.513Z,1509695155.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:55.563Z,1509695155.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:55.917Z,1509695155.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:55.967Z,1509695155.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:56.305Z,1509695156.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:56.321Z,1509695156.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:56.714Z,1509695156.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:56.791Z,1509695156.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:57.105Z,1509695157.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:57.144Z,1509695157.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:57.507Z,1509695157.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:57.558Z,1509695157.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:57.906Z,1509695157.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:57.944Z,1509695157.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:58.313Z,1509695158.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:58.347Z,1509695158.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:58.752Z,1509695158.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:58.815Z,1509695158.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:59.135Z,1509695159.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:59.162Z,1509695159.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:59.515Z,1509695159.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:59.555Z,1509695159.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:45:59.905Z,1509695159.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:45:59.953Z,1509695159.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:00.305Z,1509695160.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:00.331Z,1509695160.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:00.704Z,1509695160.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:00.805Z,1509695160.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:01.119Z,1509695161.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:01.144Z,1509695161.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:01.508Z,1509695161.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:01.530Z,1509695161.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:01.948Z,1509695161.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:02.012Z,1509695162.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:02.315Z,1509695162.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:02.343Z,1509695162.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:02.705Z,1509695162.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:02.728Z,1509695162.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:03.097Z,1509695163.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:03.159Z,1509695163.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:03.496Z,1509695163.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:03.545Z,1509695163.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:03.927Z,1509695163.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:03.956Z,1509695163.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:04.305Z,1509695164.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:04.371Z,1509695164.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:04.715Z,1509695164.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:04.752Z,1509695164.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:05.147Z,1509695165.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:05.175Z,1509695165.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:05.517Z,1509695165.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:05.572Z,1509695165.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:05.896Z,1509695165.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:05.933Z,1509695165.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:06.306Z,1509695166.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:06.333Z,1509695166.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:06.706Z,1509695166.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:06.728Z,1509695166.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:07.097Z,1509695167.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:07.131Z,1509695167.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:07.515Z,1509695167.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:07.543Z,1509695167.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:07.920Z,1509695167.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:07.935Z,1509695167.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:08.323Z,1509695168.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:08.418Z,1509695168.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:08.697Z,1509695168.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:08.783Z,1509695168.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:09.096Z,1509695169.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:09.150Z,1509695169.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:09.496Z,1509695169.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:09.570Z,1509695169.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:09.897Z,1509695169.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:09.935Z,1509695169.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:10.296Z,1509695170.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:10.370Z,1509695170.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:10.734Z,1509695170.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:10.850Z,1509695170.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:11.119Z,1509695171.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:11.147Z,1509695171.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:11.527Z,1509695171.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:11.551Z,1509695171.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:11.897Z,1509695171.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:11.949Z,1509695171.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:12.316Z,1509695172.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:12.338Z,1509695172.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:12.696Z,1509695172.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:12.792Z,1509695172.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:13.096Z,1509695173.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:13.111Z,1509695173.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:13.513Z,1509695173.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:13.538Z,1509695173.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:13.909Z,1509695173.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:13.941Z,1509695173.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:14.309Z,1509695174.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:14.340Z,1509695174.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:14.699Z,1509695174.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:14.790Z,1509695174.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:18.015Z,1509695178.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:18.035Z,1509695178.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:18.195Z,1509695178.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:18.215Z,1509695178.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:18.609Z,1509695178.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:18.624Z,1509695178.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:19.050Z,1509695179.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:19.071Z,1509695179.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:19.409Z,1509695179.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:19.431Z,1509695179.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:19.797Z,1509695179.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:19.812Z,1509695179.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:20.198Z,1509695180.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:20.218Z,1509695180.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:20.600Z,1509695180.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:20.615Z,1509695180.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:20.996Z,1509695180.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:21.011Z,1509695181.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:21.405Z,1509695181.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:21.459Z,1509695181.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:21.809Z,1509695181.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:21.824Z,1509695181.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:22.209Z,1509695182.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:22.255Z,1509695182.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:22.596Z,1509695182.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:22.619Z,1509695182.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:22.992Z,1509695182.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:23.039Z,1509695183.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:23.454Z,1509695183.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:23.503Z,1509695183.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:23.798Z,1509695183.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:23.819Z,1509695183.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:24.197Z,1509695184.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:24.212Z,1509695184.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:24.609Z,1509695184.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:24.624Z,1509695184.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:25.013Z,1509695185.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:25.028Z,1509695185.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:25.405Z,1509695185.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:25.421Z,1509695185.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:25.797Z,1509695185.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:25.812Z,1509695185.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:26.191Z,1509695186.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:26.222Z,1509695186.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:26.596Z,1509695186.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:26.615Z,1509695186.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:26.995Z,1509695186.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:27.029Z,1509695187.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:27.421Z,1509695187.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:27.451Z,1509695187.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:27.809Z,1509695187.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:27.840Z,1509695187.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:28.213Z,1509695188.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:28.245Z,1509695188.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:28.596Z,1509695188.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:28.610Z,1509695188.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:29.007Z,1509695189.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:29.055Z,1509695189.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:29.399Z,1509695189.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:29.416Z,1509695189.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:29.800Z,1509695189.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:29.815Z,1509695189.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:30.199Z,1509695190.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:30.215Z,1509695190.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:30.614Z,1509695190.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:30.645Z,1509695190.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:31.018Z,1509695191.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:31.045Z,1509695191.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:31.413Z,1509695191.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:31.445Z,1509695191.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:31.801Z,1509695191.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:31.820Z,1509695191.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:32.199Z,1509695192.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:32.214Z,1509695192.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:32.600Z,1509695192.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:32.615Z,1509695192.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:33.028Z,1509695193.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:33.093Z,1509695193.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:33.413Z,1509695193.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:33.445Z,1509695193.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:33.817Z,1509695193.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:33.852Z,1509695193.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:34.209Z,1509695194.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:34.271Z,1509695194.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:34.602Z,1509695194.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:34.621Z,1509695194.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:34.998Z,1509695194.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:35.013Z,1509695195.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:35.402Z,1509695195.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:35.417Z,1509695195.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:35.804Z,1509695195.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:35.858Z,1509695195.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:36.204Z,1509695196.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:36.219Z,1509695196.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:36.609Z,1509695196.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:36.658Z,1509695196.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:37.017Z,1509695197.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:37.050Z,1509695197.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:37.406Z,1509695197.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:37.462Z,1509695197.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:37.803Z,1509695197.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:37.819Z,1509695197.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:38.202Z,1509695198.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:38.221Z,1509695198.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:38.604Z,1509695198.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:38.619Z,1509695198.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:39.002Z,1509695199.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:39.017Z,1509695199.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:39.417Z,1509695199.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:39.432Z,1509695199.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:39.817Z,1509695199.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:39.832Z,1509695199.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:40.217Z,1509695200.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:40.232Z,1509695200.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:40.603Z,1509695200.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:40.618Z,1509695200.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:40.998Z,1509695200.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:41.019Z,1509695201.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:41.403Z,1509695201.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:41.423Z,1509695201.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:41.805Z,1509695201.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:41.820Z,1509695201.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:42.204Z,1509695202.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:42.223Z,1509695202.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:42.609Z,1509695202.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:42.624Z,1509695202.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:43.025Z,1509695203.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:43.051Z,1509695203.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:43.418Z,1509695203.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:43.452Z,1509695203.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:43.801Z,1509695203.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:43.828Z,1509695203.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:44.202Z,1509695204.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:44.227Z,1509695204.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:44.604Z,1509695204.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:44.619Z,1509695204.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:45.002Z,1509695205.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:45.017Z,1509695205.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:45.417Z,1509695205.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:45.432Z,1509695205.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:45.810Z,1509695205.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:45.825Z,1509695205.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:46.209Z,1509695206.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:46.225Z,1509695206.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:46.604Z,1509695206.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:46.619Z,1509695206.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:47.038Z,1509695207.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:47.078Z,1509695207.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:47.401Z,1509695207.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:47.422Z,1509695207.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:47.803Z,1509695207.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:47.852Z,1509695207.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:48.208Z,1509695208.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:48.223Z,1509695208.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:48.610Z,1509695208.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:48.625Z,1509695208.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:49.009Z,1509695209.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:49.031Z,1509695209.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:49.408Z,1509695209.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:49.474Z,1509695209.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:49.805Z,1509695209.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:49.820Z,1509695209.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:50.206Z,1509695210.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:50.262Z,1509695210.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:50.606Z,1509695210.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:50.621Z,1509695210.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:51.006Z,1509695211.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:51.066Z,1509695211.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:51.425Z,1509695211.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:51.479Z,1509695211.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:51.814Z,1509695211.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:51.829Z,1509695211.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:52.211Z,1509695212.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:52.225Z,1509695212.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:52.607Z,1509695212.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:52.622Z,1509695212.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:53.007Z,1509695213.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:53.027Z,1509695213.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:53.406Z,1509695213.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:53.426Z,1509695213.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:53.808Z,1509695213.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:53.824Z,1509695213.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:54.206Z,1509695214.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:54.227Z,1509695214.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:54.611Z,1509695214.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:54.627Z,1509695214.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:55.012Z,1509695215.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:55.035Z,1509695215.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:55.411Z,1509695215.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:55.431Z,1509695215.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:55.804Z,1509695215.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:55.827Z,1509695215.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:56.206Z,1509695216.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:56.221Z,1509695216.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:56.606Z,1509695216.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:56.627Z,1509695216.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:57.011Z,1509695217.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:57.026Z,1509695217.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:57.412Z,1509695217.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:57.427Z,1509695217.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:57.813Z,1509695217.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:57.828Z,1509695217.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:58.211Z,1509695218.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:58.231Z,1509695218.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:58.606Z,1509695218.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:58.621Z,1509695218.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:59.012Z,1509695219.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:59.031Z,1509695219.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:59.406Z,1509695219.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:59.427Z,1509695219.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:46:59.807Z,1509695219.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:46:59.822Z,1509695219.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:00.206Z,1509695220.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:00.227Z,1509695220.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:00.611Z,1509695220.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:00.631Z,1509695220.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:01.054Z,1509695221.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:01.084Z,1509695221.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:01.417Z,1509695221.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:01.432Z,1509695221.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:01.807Z,1509695221.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:01.827Z,1509695221.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:02.207Z,1509695222.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:02.239Z,1509695222.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:02.607Z,1509695222.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:02.622Z,1509695222.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:03.004Z,1509695223.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:03.022Z,1509695223.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:03.420Z,1509695223.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:03.479Z,1509695223.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:03.817Z,1509695223.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:03.832Z,1509695223.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:04.216Z,1509695224.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:04.231Z,1509695224.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:04.605Z,1509695224.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:04.666Z,1509695224.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:05.007Z,1509695225.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:05.027Z,1509695225.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:05.395Z,1509695225.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:05.462Z,1509695225.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:05.796Z,1509695225.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:05.831Z,1509695225.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:06.199Z,1509695226.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:06.266Z,1509695226.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:06.618Z,1509695226.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:06.633Z,1509695226.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:07.017Z,1509695227.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:07.038Z,1509695227.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:07.417Z,1509695227.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:07.433Z,1509695227.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:07.797Z,1509695227.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:07.826Z,1509695227.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:08.198Z,1509695228.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:08.223Z,1509695228.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:08.599Z,1509695228.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:08.625Z,1509695228.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:08.994Z,1509695228.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:09.019Z,1509695229.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:09.418Z,1509695229.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:09.433Z,1509695229.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:09.821Z,1509695229.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:09.870Z,1509695229.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:10.217Z,1509695230.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:10.232Z,1509695230.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:10.596Z,1509695230.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:10.621Z,1509695230.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:10.990Z,1509695230.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:11.021Z,1509695231.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:11.396Z,1509695231.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:11.426Z,1509695231.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:11.800Z,1509695231.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:11.830Z,1509695231.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:12.199Z,1509695232.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:12.231Z,1509695232.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:12.617Z,1509695232.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:12.639Z,1509695232.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:13.017Z,1509695233.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:13.033Z,1509695233.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:13.417Z,1509695233.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:13.432Z,1509695233.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:13.797Z,1509695233.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:13.826Z,1509695233.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:14.199Z,1509695234.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:14.225Z,1509695234.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:14.599Z,1509695234.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:14.624Z,1509695234.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:15.034Z,1509695235.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:15.078Z,1509695235.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:18.233Z,1509695238.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:18.318Z,1509695238.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:18.474Z,1509695238.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:18.489Z,1509695238.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:18.870Z,1509695238.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:18.891Z,1509695238.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:19.304Z,1509695239.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:19.376Z,1509695239.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:19.647Z,1509695239.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:19.679Z,1509695239.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:20.048Z,1509695240.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:20.095Z,1509695240.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:20.460Z,1509695240.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:20.507Z,1509695240.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:20.858Z,1509695240.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:20.883Z,1509695240.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:21.269Z,1509695241.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:21.284Z,1509695241.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:21.649Z,1509695241.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:21.679Z,1509695241.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:22.047Z,1509695242.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:22.063Z,1509695242.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:22.451Z,1509695242.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:22.487Z,1509695242.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:22.859Z,1509695242.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:22.890Z,1509695242.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:23.252Z,1509695243.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:23.267Z,1509695243.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:23.666Z,1509695243.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:23.695Z,1509695243.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:24.069Z,1509695244.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:24.098Z,1509695244.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:24.466Z,1509695244.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:24.496Z,1509695244.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:24.861Z,1509695244.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:24.893Z,1509695244.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:25.255Z,1509695245.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:25.270Z,1509695245.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:25.657Z,1509695245.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:25.672Z,1509695245.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:26.054Z,1509695246.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:26.069Z,1509695246.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:26.465Z,1509695246.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:26.496Z,1509695246.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:26.892Z,1509695246.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:26.907Z,1509695246.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:27.270Z,1509695247.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:27.293Z,1509695247.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:27.653Z,1509695247.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:27.668Z,1509695247.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:28.055Z,1509695248.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:28.075Z,1509695248.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:28.451Z,1509695248.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:28.466Z,1509695248.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:28.854Z,1509695248.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:28.875Z,1509695248.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:29.257Z,1509695249.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:29.272Z,1509695249.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:29.665Z,1509695249.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:29.697Z,1509695249.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:30.069Z,1509695250.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:30.102Z,1509695250.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:30.469Z,1509695250.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:30.501Z,1509695250.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:30.856Z,1509695250.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:30.879Z,1509695250.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:31.306Z,1509695251.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:31.370Z,1509695251.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:31.662Z,1509695251.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:31.683Z,1509695251.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:32.060Z,1509695252.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:32.076Z,1509695252.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:32.462Z,1509695252.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:32.523Z,1509695252.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:32.862Z,1509695252.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:32.877Z,1509695252.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:33.275Z,1509695253.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:33.370Z,1509695253.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:33.661Z,1509695253.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:33.676Z,1509695253.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:34.047Z,1509695254.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:34.109Z,1509695254.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:34.448Z,1509695254.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:34.495Z,1509695254.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:34.856Z,1509695254.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:34.886Z,1509695254.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:34.886Z,1509695254.886 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 151
2017-11-03T07:47:34.887Z,1509695254.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:47:34.888Z,1509695254.888 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:34.888Z,1509695254.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 151
2017-11-03T07:47:34.889Z,1509695254.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:47:34.890Z,1509695254.890 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:34.890Z,1509695254.890 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 151
2017-11-03T07:47:34.890Z,1509695254.890 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:47:34.969Z,1509695254.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:47:34.969Z,1509695254.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:47:34.969Z,1509695254.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:47:35.250Z,1509695255.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:35.353Z,1509695255.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:47:35.353Z,1509695255.353 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 151
2017-11-03T07:47:35.353Z,1509695255.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:47:35.353Z,1509695255.353 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 151
2017-11-03T07:47:35.354Z,1509695255.354 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:47:35.354Z,1509695255.354 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 151
2017-11-03T07:47:35.673Z,1509695255.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:35.687Z,1509695255.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:47:35.687Z,1509695255.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:47:35.687Z,1509695255.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:47:35.688Z,1509695255.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:47:35.688Z,1509695255.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:47:35.689Z,1509695255.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:47:35.689Z,1509695255.689 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:47:35.690Z,1509695255.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:47:35.690Z,1509695255.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:47:36.080Z,1509695256.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:36.095Z,1509695256.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:36.463Z,1509695256.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:36.492Z,1509695256.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:36.850Z,1509695256.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:36.865Z,1509695256.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:37.254Z,1509695257.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:37.269Z,1509695257.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:37.648Z,1509695257.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:37.671Z,1509695257.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:38.050Z,1509695258.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:38.065Z,1509695258.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:38.469Z,1509695258.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:38.499Z,1509695258.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:38.877Z,1509695258.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:38.893Z,1509695258.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:39.265Z,1509695259.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:39.290Z,1509695259.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:39.651Z,1509695259.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:39.714Z,1509695259.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:40.054Z,1509695260.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:40.078Z,1509695260.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:40.459Z,1509695260.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:40.473Z,1509695260.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:40.870Z,1509695260.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:40.885Z,1509695260.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:41.261Z,1509695261.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:41.276Z,1509695261.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:41.640Z,1509695261.640 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:47:41.641Z,1509695261.641 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T07:47:41.641Z,1509695261.641 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:47:41.674Z,1509695261.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:41.697Z,1509695261.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:47:41.698Z,1509695261.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:41.781Z,1509695261.781 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:47:42.045Z,1509695262.045 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:47:42.102Z,1509695262.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:42.139Z,1509695262.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T07:47:42.141Z,1509695262.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:42.246Z,1509695262.246 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:47:42.468Z,1509695262.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:42.484Z,1509695262.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:47:42.485Z,1509695262.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:42.850Z,1509695262.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:42.876Z,1509695262.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:47:42.877Z,1509695262.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:43.251Z,1509695263.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:43.277Z,1509695263.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:47:43.278Z,1509695263.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:43.647Z,1509695263.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:43.678Z,1509695263.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:47:43.679Z,1509695263.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:43.773Z,1509695263.773 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:47:43.773Z,1509695263.773 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T07:47:43.861Z,1509695263.861 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:47:43.861Z,1509695263.861 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:47:43.861Z,1509695263.861 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:47:43.861Z,1509695263.861 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:47:44.050Z,1509695264.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:44.075Z,1509695264.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:47:44.076Z,1509695264.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:44.471Z,1509695264.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:44.487Z,1509695264.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:47:44.487Z,1509695264.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:44.873Z,1509695264.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:44.888Z,1509695264.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:47:44.889Z,1509695264.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:45.268Z,1509695265.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:45.290Z,1509695265.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:47:45.291Z,1509695265.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:45.648Z,1509695265.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:45.678Z,1509695265.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:47:45.679Z,1509695265.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:46.052Z,1509695266.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:46.078Z,1509695266.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:47:46.079Z,1509695266.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:46.452Z,1509695266.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:46.495Z,1509695266.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:47:46.496Z,1509695266.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:46.851Z,1509695266.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:46.882Z,1509695266.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:47:46.883Z,1509695266.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:47.248Z,1509695267.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:47.263Z,1509695267.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:47:47.264Z,1509695267.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:47.662Z,1509695267.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:47.730Z,1509695267.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T07:47:47.731Z,1509695267.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:47.978Z,1509695267.978 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:47:48.055Z,1509695268.055 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:47:48.056Z,1509695268.056 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:47:48.057Z,1509695268.057 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:47:48.058Z,1509695268.058 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:47:48.096Z,1509695268.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:48.137Z,1509695268.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T07:47:48.138Z,1509695268.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:48.463Z,1509695268.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:48.515Z,1509695268.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:48.852Z,1509695268.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:48.868Z,1509695268.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:49.260Z,1509695269.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:49.325Z,1509695269.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:49.661Z,1509695269.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:49.694Z,1509695269.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:50.058Z,1509695270.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:50.093Z,1509695270.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:50.462Z,1509695270.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:50.498Z,1509695270.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:50.863Z,1509695270.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:50.899Z,1509695270.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:51.266Z,1509695271.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:51.295Z,1509695271.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:51.653Z,1509695271.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:51.668Z,1509695271.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:52.053Z,1509695272.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:52.068Z,1509695272.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:52.454Z,1509695272.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:52.470Z,1509695272.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:52.852Z,1509695272.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:52.867Z,1509695272.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:53.254Z,1509695273.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:53.269Z,1509695273.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:53.666Z,1509695273.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:53.696Z,1509695273.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:54.063Z,1509695274.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:54.097Z,1509695274.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:54.470Z,1509695274.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:54.494Z,1509695274.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:54.854Z,1509695274.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:54.870Z,1509695274.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:55.255Z,1509695275.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:55.271Z,1509695275.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:55.656Z,1509695275.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:55.671Z,1509695275.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:56.056Z,1509695276.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:56.071Z,1509695276.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:56.465Z,1509695276.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:56.495Z,1509695276.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:56.866Z,1509695276.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:56.897Z,1509695276.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:57.266Z,1509695277.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:57.297Z,1509695277.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:57.656Z,1509695277.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:57.742Z,1509695277.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:58.060Z,1509695278.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:58.095Z,1509695278.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:58.449Z,1509695278.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:58.480Z,1509695278.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:58.854Z,1509695278.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:58.885Z,1509695278.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:59.252Z,1509695279.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:59.267Z,1509695279.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:47:59.665Z,1509695279.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:47:59.758Z,1509695279.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:00.062Z,1509695280.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:00.097Z,1509695280.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:00.466Z,1509695280.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:00.495Z,1509695280.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:00.856Z,1509695280.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:00.871Z,1509695280.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:01.253Z,1509695281.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:01.320Z,1509695281.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:01.653Z,1509695281.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:01.762Z,1509695281.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:02.068Z,1509695282.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:02.099Z,1509695282.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:02.465Z,1509695282.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:02.480Z,1509695282.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:02.862Z,1509695282.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:02.919Z,1509695282.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:03.262Z,1509695283.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:03.277Z,1509695283.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:03.659Z,1509695283.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:03.699Z,1509695283.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:04.067Z,1509695284.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:04.123Z,1509695284.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:04.456Z,1509695284.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:04.472Z,1509695284.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:04.860Z,1509695284.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:04.875Z,1509695284.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:05.259Z,1509695285.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:05.279Z,1509695285.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:05.664Z,1509695285.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:05.678Z,1509695285.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:06.079Z,1509695286.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:06.110Z,1509695286.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:06.465Z,1509695286.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:06.480Z,1509695286.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:06.862Z,1509695286.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:06.877Z,1509695286.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:07.255Z,1509695287.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:07.278Z,1509695287.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:07.659Z,1509695287.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:07.675Z,1509695287.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:08.068Z,1509695288.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:08.083Z,1509695288.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:08.470Z,1509695288.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:08.485Z,1509695288.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:08.886Z,1509695288.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:08.907Z,1509695288.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:09.266Z,1509695289.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:09.286Z,1509695289.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:09.657Z,1509695289.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:09.671Z,1509695289.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:10.050Z,1509695290.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:10.087Z,1509695290.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:10.458Z,1509695290.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:10.479Z,1509695290.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:10.859Z,1509695290.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:10.875Z,1509695290.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:11.257Z,1509695291.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:11.273Z,1509695291.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:11.669Z,1509695291.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:11.691Z,1509695291.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:12.072Z,1509695292.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:12.094Z,1509695292.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:12.469Z,1509695292.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:12.487Z,1509695292.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:12.857Z,1509695292.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:12.872Z,1509695292.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:13.261Z,1509695293.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:13.279Z,1509695293.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:13.661Z,1509695293.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:13.676Z,1509695293.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:14.047Z,1509695294.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:14.081Z,1509695294.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:14.470Z,1509695294.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:14.485Z,1509695294.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:14.870Z,1509695294.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:14.891Z,1509695294.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:15.277Z,1509695295.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:15.292Z,1509695295.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:18.611Z,1509695298.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:18.710Z,1509695298.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:18.858Z,1509695298.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:18.880Z,1509695298.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:19.261Z,1509695299.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:19.291Z,1509695299.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:19.662Z,1509695299.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:19.727Z,1509695299.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:20.065Z,1509695300.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:20.096Z,1509695300.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:20.452Z,1509695300.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:20.503Z,1509695300.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:20.859Z,1509695300.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:20.915Z,1509695300.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:21.255Z,1509695301.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:21.270Z,1509695301.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:21.669Z,1509695301.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:21.692Z,1509695301.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:22.069Z,1509695302.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:22.103Z,1509695302.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:22.466Z,1509695302.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:22.497Z,1509695302.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:22.855Z,1509695302.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:22.870Z,1509695302.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:23.260Z,1509695303.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:23.276Z,1509695303.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:23.653Z,1509695303.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:23.668Z,1509695303.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:24.054Z,1509695304.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:24.069Z,1509695304.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:24.466Z,1509695304.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:24.495Z,1509695304.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:24.870Z,1509695304.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:24.901Z,1509695304.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:25.265Z,1509695305.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:25.296Z,1509695305.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:25.652Z,1509695305.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:25.667Z,1509695305.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:26.053Z,1509695306.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:26.071Z,1509695306.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:26.458Z,1509695306.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:26.473Z,1509695306.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:26.859Z,1509695306.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:26.874Z,1509695306.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:27.257Z,1509695307.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:27.272Z,1509695307.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:27.665Z,1509695307.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:27.680Z,1509695307.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:28.061Z,1509695308.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:28.095Z,1509695308.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:28.465Z,1509695308.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:28.495Z,1509695308.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:28.845Z,1509695308.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:28.867Z,1509695308.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:29.251Z,1509695309.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:29.271Z,1509695309.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:29.658Z,1509695309.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:29.689Z,1509695309.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:30.063Z,1509695310.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:30.079Z,1509695310.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:30.465Z,1509695310.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:30.480Z,1509695310.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:30.869Z,1509695310.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:30.884Z,1509695310.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:31.266Z,1509695311.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:31.286Z,1509695311.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:31.659Z,1509695311.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:31.675Z,1509695311.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:32.050Z,1509695312.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:32.081Z,1509695312.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:32.459Z,1509695312.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:32.476Z,1509695312.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:32.864Z,1509695312.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:32.950Z,1509695312.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:33.256Z,1509695313.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:33.271Z,1509695313.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:33.667Z,1509695313.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:33.719Z,1509695313.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:34.065Z,1509695314.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:34.100Z,1509695314.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:34.468Z,1509695314.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:34.522Z,1509695314.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:34.848Z,1509695314.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:34.903Z,1509695314.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:35.248Z,1509695315.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:35.278Z,1509695315.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:35.651Z,1509695315.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:35.677Z,1509695315.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:36.070Z,1509695316.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:36.090Z,1509695316.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:36.470Z,1509695316.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:36.490Z,1509695316.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:36.867Z,1509695316.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:36.882Z,1509695316.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:37.271Z,1509695317.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:37.291Z,1509695317.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:37.653Z,1509695317.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:37.679Z,1509695317.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:38.048Z,1509695318.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:38.086Z,1509695318.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:38.446Z,1509695318.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:38.477Z,1509695318.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:38.853Z,1509695318.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:38.887Z,1509695318.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:39.251Z,1509695319.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:39.277Z,1509695319.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:39.674Z,1509695319.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:39.726Z,1509695319.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:40.069Z,1509695320.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:40.084Z,1509695320.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:40.479Z,1509695320.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:40.499Z,1509695320.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:40.851Z,1509695320.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:40.875Z,1509695320.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:41.246Z,1509695321.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:41.277Z,1509695321.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:41.649Z,1509695321.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:41.676Z,1509695321.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:42.065Z,1509695322.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:42.091Z,1509695322.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:42.461Z,1509695322.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:42.492Z,1509695322.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:42.865Z,1509695322.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:42.890Z,1509695322.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:43.261Z,1509695323.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:43.292Z,1509695323.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:43.657Z,1509695323.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:43.692Z,1509695323.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:44.056Z,1509695324.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:44.091Z,1509695324.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:44.454Z,1509695324.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:44.469Z,1509695324.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:44.852Z,1509695324.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:44.867Z,1509695324.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:45.255Z,1509695325.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:45.294Z,1509695325.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:45.669Z,1509695325.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:45.698Z,1509695325.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:46.073Z,1509695326.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:46.102Z,1509695326.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:46.465Z,1509695326.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:46.496Z,1509695326.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:46.856Z,1509695326.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:46.939Z,1509695326.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:47.254Z,1509695327.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:47.279Z,1509695327.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:47.657Z,1509695327.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:47.707Z,1509695327.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:48.060Z,1509695328.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:48.075Z,1509695328.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:48.469Z,1509695328.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:48.523Z,1509695328.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:48.874Z,1509695328.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:48.919Z,1509695328.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:49.262Z,1509695329.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:49.277Z,1509695329.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:49.655Z,1509695329.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:49.671Z,1509695329.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:50.072Z,1509695330.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:50.099Z,1509695330.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:50.461Z,1509695330.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:50.477Z,1509695330.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:50.858Z,1509695330.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:50.874Z,1509695330.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:51.251Z,1509695331.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:51.270Z,1509695331.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:51.663Z,1509695331.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:51.678Z,1509695331.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:52.061Z,1509695332.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:52.076Z,1509695332.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:52.461Z,1509695332.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:52.477Z,1509695332.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:52.856Z,1509695332.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:52.871Z,1509695332.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:53.259Z,1509695333.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:53.277Z,1509695333.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:53.659Z,1509695333.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:53.674Z,1509695333.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:54.056Z,1509695334.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:54.071Z,1509695334.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:54.473Z,1509695334.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:54.503Z,1509695334.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:54.866Z,1509695334.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:54.881Z,1509695334.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:55.261Z,1509695335.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:55.277Z,1509695335.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:55.654Z,1509695335.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:55.674Z,1509695335.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:56.047Z,1509695336.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:56.087Z,1509695336.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:56.451Z,1509695336.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:56.486Z,1509695336.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:56.854Z,1509695336.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:56.886Z,1509695336.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:57.251Z,1509695337.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:57.285Z,1509695337.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:57.661Z,1509695337.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:57.691Z,1509695337.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:58.066Z,1509695338.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:58.094Z,1509695338.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:58.469Z,1509695338.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:58.484Z,1509695338.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:58.857Z,1509695338.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:58.878Z,1509695338.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:59.258Z,1509695339.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:59.273Z,1509695339.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:48:59.662Z,1509695339.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:48:59.677Z,1509695339.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:00.059Z,1509695340.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:00.091Z,1509695340.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:00.456Z,1509695340.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:00.487Z,1509695340.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:00.873Z,1509695340.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:00.935Z,1509695340.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:01.260Z,1509695341.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:01.311Z,1509695341.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:01.653Z,1509695341.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:01.668Z,1509695341.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:02.053Z,1509695342.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:02.086Z,1509695342.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:02.448Z,1509695342.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:02.503Z,1509695342.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:02.852Z,1509695342.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:02.888Z,1509695342.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:03.251Z,1509695343.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:03.307Z,1509695343.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:03.666Z,1509695343.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:03.735Z,1509695343.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:04.065Z,1509695344.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:04.104Z,1509695344.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:04.463Z,1509695344.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:04.488Z,1509695344.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:04.847Z,1509695344.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:04.867Z,1509695344.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:05.260Z,1509695345.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:05.288Z,1509695345.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:05.648Z,1509695345.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:05.664Z,1509695345.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:06.055Z,1509695346.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:06.079Z,1509695346.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:06.470Z,1509695346.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:06.498Z,1509695346.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:06.866Z,1509695346.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:06.890Z,1509695346.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:07.262Z,1509695347.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:07.293Z,1509695347.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:07.650Z,1509695347.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:07.665Z,1509695347.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:08.050Z,1509695348.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:08.071Z,1509695348.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:08.455Z,1509695348.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:08.470Z,1509695348.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:08.855Z,1509695348.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:08.870Z,1509695348.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:09.250Z,1509695349.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:09.265Z,1509695349.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:09.669Z,1509695349.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:09.770Z,1509695349.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:10.061Z,1509695350.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:10.076Z,1509695350.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:10.461Z,1509695350.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:10.477Z,1509695350.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:10.862Z,1509695350.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:10.877Z,1509695350.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:11.260Z,1509695351.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:11.275Z,1509695351.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:11.658Z,1509695351.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:11.673Z,1509695351.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:12.047Z,1509695352.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:12.081Z,1509695352.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:12.459Z,1509695352.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:12.486Z,1509695352.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:12.872Z,1509695352.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:12.887Z,1509695352.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:13.269Z,1509695353.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:13.285Z,1509695353.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:13.651Z,1509695353.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:13.681Z,1509695353.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:14.064Z,1509695354.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:14.097Z,1509695354.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:14.456Z,1509695354.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:14.471Z,1509695354.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:14.474Z,1509695354.474 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T07:49:14.474Z,1509695354.474 [Default:CheckIn:C.Wait] Stopped
2017-11-03T07:49:14.474Z,1509695354.474 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T07:49:14.474Z,1509695354.474 [Default:CheckIn:D] Running Loop=1
2017-11-03T07:49:14.856Z,1509695354.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:14.878Z,1509695354.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:14.903Z,1509695354.903 [Default:CheckIn:D] Stopped
2017-11-03T07:49:14.903Z,1509695354.903 [Default:CheckIn:E] Running Loop=1
2017-11-03T07:49:15.252Z,1509695355.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:15.267Z,1509695355.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:15.271Z,1509695355.271 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 454.122266 min 
2017-11-03T07:49:15.271Z,1509695355.271 [Default:CheckIn:E] Stopped
2017-11-03T07:49:15.271Z,1509695355.271 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T07:49:15.271Z,1509695355.271 [Default:CheckIn] Stopped
2017-11-03T07:49:15.271Z,1509695355.271 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T07:49:15.271Z,1509695355.271 [Default:CheckIn](INFO): Running loop #45
2017-11-03T07:49:15.271Z,1509695355.271 [Default:CheckIn] Running Loop=45
2017-11-03T07:49:15.272Z,1509695355.272 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T07:49:15.272Z,1509695355.272 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T07:49:15.686Z,1509695355.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:15.735Z,1509695355.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:18.843Z,1509695358.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:18.901Z,1509695358.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:19.041Z,1509695359.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:19.080Z,1509695359.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:19.435Z,1509695359.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:19.450Z,1509695359.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:19.837Z,1509695359.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:19.853Z,1509695359.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:20.228Z,1509695360.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:20.332Z,1509695360.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:20.633Z,1509695360.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:20.649Z,1509695360.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:21.033Z,1509695361.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:21.083Z,1509695361.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:21.438Z,1509695361.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:21.487Z,1509695361.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:21.838Z,1509695361.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:21.853Z,1509695361.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:22.256Z,1509695362.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:22.345Z,1509695362.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:22.633Z,1509695362.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:22.649Z,1509695362.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:23.032Z,1509695363.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:23.049Z,1509695363.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:23.434Z,1509695363.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:23.450Z,1509695363.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:23.823Z,1509695363.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:23.849Z,1509695363.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:24.232Z,1509695364.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:24.248Z,1509695364.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:24.645Z,1509695364.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:24.660Z,1509695364.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:25.041Z,1509695365.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:25.056Z,1509695365.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:25.444Z,1509695365.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:25.459Z,1509695365.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:25.843Z,1509695365.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:25.863Z,1509695365.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:26.220Z,1509695366.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:26.252Z,1509695366.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:26.637Z,1509695366.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:26.652Z,1509695366.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:27.026Z,1509695367.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:27.051Z,1509695367.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:27.445Z,1509695367.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:27.467Z,1509695367.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:27.850Z,1509695367.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:27.865Z,1509695367.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:28.245Z,1509695368.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:28.266Z,1509695368.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:28.620Z,1509695368.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:28.648Z,1509695368.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:29.024Z,1509695369.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:29.055Z,1509695369.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:29.427Z,1509695369.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:29.452Z,1509695369.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:29.849Z,1509695369.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:29.902Z,1509695369.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:30.224Z,1509695370.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:30.257Z,1509695370.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:30.654Z,1509695370.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:30.669Z,1509695370.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:31.049Z,1509695371.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:31.065Z,1509695371.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:31.444Z,1509695371.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:31.459Z,1509695371.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:31.826Z,1509695371.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:31.859Z,1509695371.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:32.223Z,1509695372.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:32.254Z,1509695372.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:32.625Z,1509695372.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:32.652Z,1509695372.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:33.027Z,1509695373.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:33.058Z,1509695373.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:33.444Z,1509695373.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:33.522Z,1509695373.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:33.845Z,1509695373.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:33.860Z,1509695373.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:34.233Z,1509695374.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:34.340Z,1509695374.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:34.627Z,1509695374.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:34.663Z,1509695374.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:35.030Z,1509695375.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:35.082Z,1509695375.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:35.431Z,1509695375.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:35.482Z,1509695375.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:35.832Z,1509695375.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:35.863Z,1509695375.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:36.224Z,1509695376.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:36.286Z,1509695376.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:36.645Z,1509695376.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:36.674Z,1509695376.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:37.045Z,1509695377.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:37.075Z,1509695377.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:37.437Z,1509695377.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:37.452Z,1509695377.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:37.834Z,1509695377.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:37.854Z,1509695377.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:38.232Z,1509695378.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:38.251Z,1509695378.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:38.632Z,1509695378.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:38.655Z,1509695378.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:39.032Z,1509695379.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:39.047Z,1509695379.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:39.445Z,1509695379.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:39.473Z,1509695379.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:39.837Z,1509695379.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:39.852Z,1509695379.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:40.237Z,1509695380.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:40.251Z,1509695380.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:40.632Z,1509695380.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:40.651Z,1509695380.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:41.033Z,1509695381.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:41.048Z,1509695381.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:41.431Z,1509695381.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:41.446Z,1509695381.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:41.836Z,1509695381.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:41.855Z,1509695381.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:42.231Z,1509695382.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:42.247Z,1509695382.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:42.645Z,1509695382.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:42.674Z,1509695382.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:43.037Z,1509695383.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:43.052Z,1509695383.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:43.437Z,1509695383.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:43.453Z,1509695383.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:43.866Z,1509695383.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:43.894Z,1509695383.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:44.230Z,1509695384.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:44.245Z,1509695384.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:44.633Z,1509695384.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:44.640Z,1509695384.640 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:49:44.641Z,1509695384.641 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T07:49:44.641Z,1509695384.641 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:49:44.649Z,1509695384.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:49:44.649Z,1509695384.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:44.749Z,1509695384.749 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:49:45.032Z,1509695385.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:45.044Z,1509695385.044 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:49:45.083Z,1509695385.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T07:49:45.093Z,1509695385.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:45.232Z,1509695385.232 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:49:45.437Z,1509695385.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:45.467Z,1509695385.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:49:45.468Z,1509695385.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:45.845Z,1509695385.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:45.860Z,1509695385.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:49:45.861Z,1509695385.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:46.245Z,1509695386.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:46.260Z,1509695386.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:49:46.261Z,1509695386.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:46.634Z,1509695386.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:46.651Z,1509695386.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:49:46.652Z,1509695386.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:46.737Z,1509695386.737 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:49:46.737Z,1509695386.737 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T07:49:46.848Z,1509695386.848 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:49:46.849Z,1509695386.849 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:49:46.849Z,1509695386.849 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:49:46.849Z,1509695386.849 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:49:47.034Z,1509695387.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:47.055Z,1509695387.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:49:47.056Z,1509695387.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:47.434Z,1509695387.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:47.449Z,1509695387.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:49:47.450Z,1509695387.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:47.835Z,1509695387.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:47.918Z,1509695387.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T07:49:47.919Z,1509695387.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:48.222Z,1509695388.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:48.255Z,1509695388.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:49:48.256Z,1509695388.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:48.641Z,1509695388.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:48.691Z,1509695388.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:49:48.692Z,1509695388.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:49.047Z,1509695389.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:49.066Z,1509695389.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:49:49.067Z,1509695389.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:49.444Z,1509695389.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:49.501Z,1509695389.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T07:49:49.502Z,1509695389.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:49.826Z,1509695389.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:49.867Z,1509695389.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:49:49.868Z,1509695389.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:50.227Z,1509695390.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:50.246Z,1509695390.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:49:50.247Z,1509695390.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:50.628Z,1509695390.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:50.646Z,1509695390.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:49:50.647Z,1509695390.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:50.975Z,1509695390.975 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:49:51.051Z,1509695391.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:51.087Z,1509695391.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:49:51.088Z,1509695391.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:51.095Z,1509695391.095 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:49:51.096Z,1509695391.096 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:49:51.097Z,1509695391.097 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:49:51.098Z,1509695391.098 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:49:51.442Z,1509695391.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:51.456Z,1509695391.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:49:51.457Z,1509695391.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:51.839Z,1509695391.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:51.859Z,1509695391.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:52.240Z,1509695392.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:52.255Z,1509695392.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:52.632Z,1509695392.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:52.647Z,1509695392.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:53.032Z,1509695393.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:53.047Z,1509695393.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:53.436Z,1509695393.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:53.450Z,1509695393.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:53.829Z,1509695393.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:53.844Z,1509695393.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:54.232Z,1509695394.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:54.248Z,1509695394.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:54.639Z,1509695394.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:54.654Z,1509695394.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:55.040Z,1509695395.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:55.055Z,1509695395.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:55.444Z,1509695395.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:55.483Z,1509695395.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:55.835Z,1509695395.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:55.850Z,1509695395.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:56.227Z,1509695396.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:56.255Z,1509695396.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:56.633Z,1509695396.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:56.649Z,1509695396.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:57.036Z,1509695397.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:57.051Z,1509695397.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:57.445Z,1509695397.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:57.460Z,1509695397.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:57.844Z,1509695397.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:57.867Z,1509695397.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:58.242Z,1509695398.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:58.257Z,1509695398.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:58.633Z,1509695398.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:58.649Z,1509695398.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:59.034Z,1509695399.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:59.055Z,1509695399.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:59.431Z,1509695399.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:59.446Z,1509695399.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:49:59.837Z,1509695399.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:49:59.853Z,1509695399.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:00.233Z,1509695400.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:00.248Z,1509695400.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:00.644Z,1509695400.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:00.659Z,1509695400.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:01.038Z,1509695401.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:01.075Z,1509695401.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:01.438Z,1509695401.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:01.467Z,1509695401.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:01.827Z,1509695401.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:01.881Z,1509695401.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:02.223Z,1509695402.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:02.271Z,1509695402.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:02.624Z,1509695402.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:02.640Z,1509695402.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:03.034Z,1509695403.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:03.091Z,1509695403.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:03.437Z,1509695403.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:03.461Z,1509695403.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:03.846Z,1509695403.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:03.891Z,1509695403.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:04.237Z,1509695404.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:04.287Z,1509695404.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:04.623Z,1509695404.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:04.638Z,1509695404.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:05.027Z,1509695405.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:05.059Z,1509695405.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:05.427Z,1509695405.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:05.458Z,1509695405.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:05.831Z,1509695405.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:05.859Z,1509695405.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:06.226Z,1509695406.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:06.261Z,1509695406.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:06.638Z,1509695406.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:06.662Z,1509695406.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:07.049Z,1509695407.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:07.081Z,1509695407.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:07.441Z,1509695407.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:07.472Z,1509695407.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:07.823Z,1509695407.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:07.837Z,1509695407.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:08.223Z,1509695408.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:08.238Z,1509695408.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:08.631Z,1509695408.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:08.645Z,1509695408.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:09.031Z,1509695409.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:09.045Z,1509695409.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:09.441Z,1509695409.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:09.475Z,1509695409.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:09.841Z,1509695409.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:09.875Z,1509695409.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:10.233Z,1509695410.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:10.248Z,1509695410.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:10.626Z,1509695410.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:10.641Z,1509695410.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:11.040Z,1509695411.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:11.054Z,1509695411.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:11.430Z,1509695411.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:11.445Z,1509695411.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:11.829Z,1509695411.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:11.844Z,1509695411.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:12.231Z,1509695412.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:12.246Z,1509695412.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:12.645Z,1509695412.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:12.678Z,1509695412.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:13.037Z,1509695413.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:13.052Z,1509695413.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:13.434Z,1509695413.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:13.449Z,1509695413.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:13.831Z,1509695413.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:13.846Z,1509695413.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:14.231Z,1509695414.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:14.246Z,1509695414.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:14.632Z,1509695414.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:14.647Z,1509695414.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:15.031Z,1509695415.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:15.046Z,1509695415.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:15.449Z,1509695415.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:15.480Z,1509695415.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:15.846Z,1509695415.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:15.878Z,1509695415.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:19.125Z,1509695419.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:19.191Z,1509695419.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:19.337Z,1509695419.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:19.352Z,1509695419.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:19.733Z,1509695419.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:19.788Z,1509695419.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:20.139Z,1509695420.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:20.154Z,1509695420.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:20.535Z,1509695420.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:20.595Z,1509695420.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:20.943Z,1509695420.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:20.995Z,1509695420.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:21.332Z,1509695421.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:21.351Z,1509695421.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:21.744Z,1509695421.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:21.766Z,1509695421.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:22.145Z,1509695422.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:22.160Z,1509695422.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:22.545Z,1509695422.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:22.559Z,1509695422.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:22.943Z,1509695422.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:22.963Z,1509695422.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:23.333Z,1509695423.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:23.348Z,1509695423.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:23.730Z,1509695423.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:23.745Z,1509695423.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:24.123Z,1509695424.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:24.154Z,1509695424.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:24.545Z,1509695424.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:24.561Z,1509695424.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:24.968Z,1509695424.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:25.015Z,1509695425.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:25.338Z,1509695425.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:25.360Z,1509695425.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:25.725Z,1509695425.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:25.759Z,1509695425.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:26.127Z,1509695426.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:26.153Z,1509695426.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:26.527Z,1509695426.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:26.554Z,1509695426.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:26.926Z,1509695426.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:26.951Z,1509695426.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:27.351Z,1509695427.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:27.369Z,1509695427.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:27.746Z,1509695427.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:27.762Z,1509695427.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:28.145Z,1509695428.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:28.160Z,1509695428.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:28.547Z,1509695428.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:28.561Z,1509695428.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:28.924Z,1509695428.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:28.955Z,1509695428.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:29.326Z,1509695429.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:29.373Z,1509695429.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:29.726Z,1509695429.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:29.753Z,1509695429.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:30.127Z,1509695430.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:30.163Z,1509695430.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:30.546Z,1509695430.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:30.561Z,1509695430.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:30.946Z,1509695430.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:30.961Z,1509695430.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:31.345Z,1509695431.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:31.367Z,1509695431.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:31.725Z,1509695431.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:31.754Z,1509695431.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:32.127Z,1509695432.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:32.159Z,1509695432.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:32.527Z,1509695432.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:32.553Z,1509695432.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:32.924Z,1509695432.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:33.014Z,1509695433.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:33.325Z,1509695433.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:33.358Z,1509695433.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:33.745Z,1509695433.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:33.761Z,1509695433.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:34.148Z,1509695434.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:34.201Z,1509695434.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:34.546Z,1509695434.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:34.560Z,1509695434.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:34.935Z,1509695434.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:34.996Z,1509695434.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:35.325Z,1509695435.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:35.371Z,1509695435.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:35.728Z,1509695435.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:35.758Z,1509695435.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:35.758Z,1509695435.758 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 152
2017-11-03T07:50:35.758Z,1509695435.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:50:35.760Z,1509695435.760 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:35.760Z,1509695435.760 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 152
2017-11-03T07:50:35.760Z,1509695435.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:50:35.762Z,1509695435.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:35.762Z,1509695435.762 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 152
2017-11-03T07:50:35.762Z,1509695435.762 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:50:35.853Z,1509695435.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:50:35.853Z,1509695435.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:50:35.853Z,1509695435.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:50:36.127Z,1509695436.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:36.244Z,1509695436.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:50:36.245Z,1509695436.245 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 152
2017-11-03T07:50:36.245Z,1509695436.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:50:36.245Z,1509695436.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 152
2017-11-03T07:50:36.246Z,1509695436.246 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:50:36.246Z,1509695436.246 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 152
2017-11-03T07:50:36.545Z,1509695436.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:36.559Z,1509695436.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:50:36.559Z,1509695436.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:50:36.560Z,1509695436.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:50:36.560Z,1509695436.560 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:50:36.560Z,1509695436.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:50:36.561Z,1509695436.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:50:36.561Z,1509695436.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:50:36.562Z,1509695436.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:50:36.562Z,1509695436.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:50:36.964Z,1509695436.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:36.978Z,1509695436.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:37.337Z,1509695437.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:37.363Z,1509695437.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:37.724Z,1509695437.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:37.738Z,1509695437.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:38.121Z,1509695438.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:38.135Z,1509695438.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:38.527Z,1509695438.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:38.567Z,1509695438.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:38.926Z,1509695438.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:38.990Z,1509695438.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:39.332Z,1509695439.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:39.346Z,1509695439.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:39.745Z,1509695439.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:39.760Z,1509695439.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:40.137Z,1509695440.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:40.151Z,1509695440.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:40.537Z,1509695440.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:40.553Z,1509695440.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:40.933Z,1509695440.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:40.948Z,1509695440.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:41.349Z,1509695441.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:41.372Z,1509695441.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:41.736Z,1509695441.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:41.751Z,1509695441.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:42.133Z,1509695442.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:42.148Z,1509695442.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:42.538Z,1509695442.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:42.552Z,1509695442.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:42.937Z,1509695442.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:42.952Z,1509695442.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:43.358Z,1509695443.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:43.384Z,1509695443.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:43.733Z,1509695443.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:43.748Z,1509695443.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:44.133Z,1509695444.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:44.148Z,1509695444.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:44.536Z,1509695444.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:44.551Z,1509695444.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:44.931Z,1509695444.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:44.950Z,1509695444.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:45.333Z,1509695445.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:45.349Z,1509695445.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:45.738Z,1509695445.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:45.753Z,1509695445.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:46.137Z,1509695446.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:46.152Z,1509695446.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:46.537Z,1509695446.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:46.558Z,1509695446.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:46.931Z,1509695446.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:46.990Z,1509695446.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:47.333Z,1509695447.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:47.349Z,1509695447.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:47.734Z,1509695447.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:47.798Z,1509695447.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:48.132Z,1509695448.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:48.147Z,1509695448.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:48.540Z,1509695448.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:48.580Z,1509695448.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:48.938Z,1509695448.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:48.973Z,1509695448.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:49.340Z,1509695449.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:49.390Z,1509695449.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:49.733Z,1509695449.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:49.747Z,1509695449.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:50.133Z,1509695450.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:50.186Z,1509695450.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:50.535Z,1509695450.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:50.555Z,1509695450.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:50.942Z,1509695450.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:50.957Z,1509695450.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:51.337Z,1509695451.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:51.352Z,1509695451.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:51.741Z,1509695451.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:51.756Z,1509695451.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:52.141Z,1509695452.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:52.156Z,1509695452.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:52.541Z,1509695452.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:52.555Z,1509695452.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:52.934Z,1509695452.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:53.010Z,1509695453.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:53.333Z,1509695453.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:53.348Z,1509695453.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:53.734Z,1509695453.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:53.755Z,1509695453.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:54.129Z,1509695454.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:54.149Z,1509695454.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:54.544Z,1509695454.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:54.560Z,1509695454.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:54.944Z,1509695454.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:54.960Z,1509695454.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:55.345Z,1509695455.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:55.385Z,1509695455.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:55.733Z,1509695455.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:55.748Z,1509695455.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:56.136Z,1509695456.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:56.151Z,1509695456.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:56.531Z,1509695456.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:56.546Z,1509695456.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:56.932Z,1509695456.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:56.947Z,1509695456.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:57.352Z,1509695457.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:57.375Z,1509695457.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:57.746Z,1509695457.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:57.761Z,1509695457.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:58.149Z,1509695458.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:58.165Z,1509695458.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:58.548Z,1509695458.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:58.563Z,1509695458.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:58.928Z,1509695458.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:58.959Z,1509695458.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:59.326Z,1509695459.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:59.341Z,1509695459.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:50:59.729Z,1509695459.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:50:59.774Z,1509695459.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:00.130Z,1509695460.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:00.175Z,1509695460.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:00.549Z,1509695460.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:00.579Z,1509695460.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:00.948Z,1509695460.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:00.981Z,1509695460.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:01.343Z,1509695461.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:01.383Z,1509695461.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:01.738Z,1509695461.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:01.779Z,1509695461.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:02.135Z,1509695462.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:02.207Z,1509695462.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:02.535Z,1509695462.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:02.607Z,1509695462.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:02.950Z,1509695462.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:02.974Z,1509695462.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:03.336Z,1509695463.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:03.397Z,1509695463.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:03.744Z,1509695463.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:03.802Z,1509695463.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:04.159Z,1509695464.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:04.202Z,1509695464.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:04.552Z,1509695464.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:04.611Z,1509695464.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:04.934Z,1509695464.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:04.967Z,1509695464.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:05.325Z,1509695465.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:05.398Z,1509695465.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:05.726Z,1509695465.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:05.761Z,1509695465.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:06.150Z,1509695466.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:06.173Z,1509695466.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:06.535Z,1509695466.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:06.597Z,1509695466.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:06.979Z,1509695466.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:07.085Z,1509695467.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:07.336Z,1509695467.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:07.396Z,1509695467.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:07.725Z,1509695467.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:07.768Z,1509695467.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:08.133Z,1509695468.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:08.167Z,1509695468.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:08.540Z,1509695468.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:08.601Z,1509695468.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:08.933Z,1509695468.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:08.960Z,1509695468.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:09.333Z,1509695469.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:09.405Z,1509695469.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:09.742Z,1509695469.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:09.763Z,1509695469.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:10.147Z,1509695470.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:10.175Z,1509695470.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:10.544Z,1509695470.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:10.571Z,1509695470.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:10.926Z,1509695470.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:10.967Z,1509695470.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:11.325Z,1509695471.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:11.359Z,1509695471.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:11.725Z,1509695471.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:11.793Z,1509695471.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:12.125Z,1509695472.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:12.151Z,1509695472.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:12.540Z,1509695472.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:12.573Z,1509695472.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:12.948Z,1509695472.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:12.971Z,1509695472.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:13.335Z,1509695473.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:13.373Z,1509695473.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:13.725Z,1509695473.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:13.767Z,1509695473.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:14.125Z,1509695474.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:14.178Z,1509695474.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:14.524Z,1509695474.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:14.573Z,1509695474.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:14.963Z,1509695474.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:15.010Z,1509695475.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:15.325Z,1509695475.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:15.382Z,1509695475.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:15.734Z,1509695475.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:15.759Z,1509695475.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:16.149Z,1509695476.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:16.165Z,1509695476.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:19.517Z,1509695479.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:19.598Z,1509695479.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:19.769Z,1509695479.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:19.787Z,1509695479.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:20.138Z,1509695480.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:20.163Z,1509695480.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:20.535Z,1509695480.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:20.600Z,1509695480.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:20.936Z,1509695480.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:21.037Z,1509695481.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:21.336Z,1509695481.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:21.383Z,1509695481.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:21.758Z,1509695481.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:21.814Z,1509695481.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:22.145Z,1509695482.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:22.179Z,1509695482.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:22.557Z,1509695482.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:22.572Z,1509695482.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:22.936Z,1509695482.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:22.972Z,1509695482.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:23.371Z,1509695483.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:23.400Z,1509695483.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:23.737Z,1509695483.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:23.773Z,1509695483.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:24.137Z,1509695484.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:24.152Z,1509695484.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:24.550Z,1509695484.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:24.583Z,1509695484.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:24.945Z,1509695484.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:24.972Z,1509695484.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:25.372Z,1509695485.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:25.387Z,1509695485.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:25.737Z,1509695485.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:25.773Z,1509695485.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:26.135Z,1509695486.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:26.154Z,1509695486.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:26.537Z,1509695486.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:26.553Z,1509695486.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:26.939Z,1509695486.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:26.954Z,1509695486.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:27.336Z,1509695487.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:27.375Z,1509695487.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:27.749Z,1509695487.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:27.782Z,1509695487.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:28.145Z,1509695488.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:28.160Z,1509695488.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:28.549Z,1509695488.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:28.579Z,1509695488.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:28.951Z,1509695488.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:28.980Z,1509695488.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:29.341Z,1509695489.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:29.379Z,1509695489.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:29.741Z,1509695489.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:29.759Z,1509695489.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:30.140Z,1509695490.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:30.155Z,1509695490.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:30.553Z,1509695490.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:30.585Z,1509695490.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:30.972Z,1509695490.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:30.995Z,1509695490.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:31.354Z,1509695491.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:31.385Z,1509695491.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:31.736Z,1509695491.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:31.752Z,1509695491.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:32.136Z,1509695492.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:32.151Z,1509695492.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:32.540Z,1509695492.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:32.556Z,1509695492.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:32.952Z,1509695492.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:32.984Z,1509695492.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:33.340Z,1509695493.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:33.410Z,1509695493.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:33.749Z,1509695493.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:33.818Z,1509695493.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:34.152Z,1509695494.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:34.167Z,1509695494.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:34.552Z,1509695494.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:34.592Z,1509695494.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:34.952Z,1509695494.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:35.013Z,1509695495.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:35.345Z,1509695495.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:35.400Z,1509695495.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:35.746Z,1509695495.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:35.761Z,1509695495.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:36.146Z,1509695496.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:36.206Z,1509695496.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:36.556Z,1509695496.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:36.571Z,1509695496.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:36.956Z,1509695496.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:36.979Z,1509695496.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:37.359Z,1509695497.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:37.374Z,1509695497.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:37.745Z,1509695497.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:37.760Z,1509695497.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:38.146Z,1509695498.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:38.161Z,1509695498.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:38.546Z,1509695498.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:38.565Z,1509695498.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:38.943Z,1509695498.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:38.963Z,1509695498.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:39.354Z,1509695499.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:39.377Z,1509695499.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:39.774Z,1509695499.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:39.803Z,1509695499.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:40.155Z,1509695500.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:40.175Z,1509695500.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:40.555Z,1509695500.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:40.571Z,1509695500.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:40.939Z,1509695500.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:40.974Z,1509695500.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:41.338Z,1509695501.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:41.353Z,1509695501.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:41.744Z,1509695501.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:41.779Z,1509695501.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:42.135Z,1509695502.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:42.151Z,1509695502.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:42.550Z,1509695502.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:42.578Z,1509695502.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:42.972Z,1509695502.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:42.988Z,1509695502.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:43.354Z,1509695503.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:43.385Z,1509695503.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:43.740Z,1509695503.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:43.756Z,1509695503.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:44.142Z,1509695504.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:44.158Z,1509695504.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:44.536Z,1509695504.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:44.551Z,1509695504.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:44.945Z,1509695504.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:44.960Z,1509695504.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:45.340Z,1509695505.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:45.355Z,1509695505.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:45.753Z,1509695505.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:45.798Z,1509695505.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:46.153Z,1509695506.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:46.183Z,1509695506.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:46.553Z,1509695506.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:46.583Z,1509695506.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:46.951Z,1509695506.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:46.984Z,1509695506.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:47.341Z,1509695507.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:47.355Z,1509695507.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:47.624Z,1509695507.624 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:51:47.624Z,1509695507.624 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T07:51:47.624Z,1509695507.624 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:51:47.743Z,1509695507.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:47.758Z,1509695507.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T07:51:47.759Z,1509695507.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:47.869Z,1509695507.869 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:51:48.029Z,1509695508.029 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:51:48.151Z,1509695508.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:48.194Z,1509695508.194 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:51:48.273Z,1509695508.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T07:51:48.274Z,1509695508.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:48.553Z,1509695508.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:48.584Z,1509695508.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:51:48.585Z,1509695508.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:48.953Z,1509695508.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:48.998Z,1509695508.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:51:48.999Z,1509695508.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:49.349Z,1509695509.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:49.363Z,1509695509.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:51:49.388Z,1509695509.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:49.471Z,1509695509.471 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T07:51:49.471Z,1509695509.471 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T07:51:49.743Z,1509695509.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:49.802Z,1509695509.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:51:49.803Z,1509695509.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:49.809Z,1509695509.809 [Rowe_600LCM](INFO): Initializing
2017-11-03T07:51:49.809Z,1509695509.809 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T07:51:49.809Z,1509695509.809 [Rowe_600LCM](INFO): LCM OK
2017-11-03T07:51:49.809Z,1509695509.809 [Rowe_600LCM](INFO): Powering up
2017-11-03T07:51:50.140Z,1509695510.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:50.155Z,1509695510.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:51:50.156Z,1509695510.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:50.543Z,1509695510.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:50.602Z,1509695510.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:51:50.603Z,1509695510.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:50.941Z,1509695510.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:50.956Z,1509695510.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:51:50.957Z,1509695510.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:51.340Z,1509695511.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:51.355Z,1509695511.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:51:51.356Z,1509695511.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:51.753Z,1509695511.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:51.785Z,1509695511.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:51:51.786Z,1509695511.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:52.153Z,1509695512.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:52.184Z,1509695512.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:51:52.185Z,1509695512.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:52.553Z,1509695512.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:52.584Z,1509695512.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:51:52.585Z,1509695512.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:52.935Z,1509695512.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:52.950Z,1509695512.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:51:52.951Z,1509695512.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:53.340Z,1509695513.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:53.355Z,1509695513.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:51:53.356Z,1509695513.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:53.743Z,1509695513.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:53.757Z,1509695513.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:51:53.758Z,1509695513.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:53.946Z,1509695513.946 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T07:51:54.007Z,1509695514.007 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T07:51:54.008Z,1509695514.008 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T07:51:54.009Z,1509695514.009 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T07:51:54.009Z,1509695514.009 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T07:51:54.152Z,1509695514.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:54.193Z,1509695514.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:51:54.194Z,1509695514.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:54.557Z,1509695514.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:54.581Z,1509695514.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:54.954Z,1509695514.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:54.984Z,1509695514.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:55.354Z,1509695515.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:55.389Z,1509695515.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:55.493Z,1509695515.493 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T07:51:55.740Z,1509695515.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:55.756Z,1509695515.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:56.142Z,1509695516.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:56.159Z,1509695516.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:56.540Z,1509695516.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:56.555Z,1509695516.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:56.941Z,1509695516.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:56.956Z,1509695516.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:57.340Z,1509695517.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:57.355Z,1509695517.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:57.753Z,1509695517.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:57.784Z,1509695517.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:58.153Z,1509695518.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:58.183Z,1509695518.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:58.553Z,1509695518.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:58.585Z,1509695518.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:58.947Z,1509695518.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:58.962Z,1509695518.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:59.340Z,1509695519.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:59.363Z,1509695519.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:51:59.742Z,1509695519.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:51:59.758Z,1509695519.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:00.140Z,1509695520.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:00.155Z,1509695520.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:00.557Z,1509695520.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:00.636Z,1509695520.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:00.988Z,1509695520.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:01.056Z,1509695521.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:01.353Z,1509695521.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:01.383Z,1509695521.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:01.740Z,1509695521.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:01.763Z,1509695521.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:02.140Z,1509695522.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:02.155Z,1509695522.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:02.542Z,1509695522.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:02.606Z,1509695522.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:02.942Z,1509695522.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:03.006Z,1509695523.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:03.340Z,1509695523.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:03.363Z,1509695523.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:03.789Z,1509695523.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:03.831Z,1509695523.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:04.153Z,1509695524.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:04.185Z,1509695524.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:04.553Z,1509695524.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:04.606Z,1509695524.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:04.941Z,1509695524.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:04.983Z,1509695524.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:05.341Z,1509695525.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:05.355Z,1509695525.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:05.768Z,1509695525.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:05.791Z,1509695525.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:06.141Z,1509695526.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:06.156Z,1509695526.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:06.553Z,1509695526.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:06.584Z,1509695526.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:06.953Z,1509695526.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:06.968Z,1509695526.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:07.345Z,1509695527.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:07.360Z,1509695527.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:07.776Z,1509695527.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:07.800Z,1509695527.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:08.141Z,1509695528.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:08.156Z,1509695528.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:08.541Z,1509695528.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:08.562Z,1509695528.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:08.942Z,1509695528.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:08.963Z,1509695528.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:09.341Z,1509695529.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:09.356Z,1509695529.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:09.809Z,1509695529.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:09.833Z,1509695529.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:10.154Z,1509695530.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:10.185Z,1509695530.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:10.554Z,1509695530.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:10.585Z,1509695530.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:10.940Z,1509695530.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:10.956Z,1509695530.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:11.342Z,1509695531.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:11.358Z,1509695531.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:11.744Z,1509695531.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:11.807Z,1509695531.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:12.142Z,1509695532.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:12.170Z,1509695532.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:12.550Z,1509695532.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:12.565Z,1509695532.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:12.949Z,1509695532.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:12.965Z,1509695532.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:13.349Z,1509695533.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:13.364Z,1509695533.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:13.744Z,1509695533.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:13.759Z,1509695533.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:14.152Z,1509695534.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:14.193Z,1509695534.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:14.545Z,1509695534.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:14.560Z,1509695534.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:14.945Z,1509695534.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:14.967Z,1509695534.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:15.345Z,1509695535.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:15.367Z,1509695535.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:15.750Z,1509695535.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:15.765Z,1509695535.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:16.161Z,1509695536.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:16.190Z,1509695536.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:19.355Z,1509695539.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:19.443Z,1509695539.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:19.575Z,1509695539.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:19.611Z,1509695539.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:19.975Z,1509695539.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:20.027Z,1509695540.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:20.383Z,1509695540.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:20.409Z,1509695540.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:20.773Z,1509695540.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:20.821Z,1509695540.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:21.176Z,1509695541.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:21.231Z,1509695541.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:21.597Z,1509695541.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:21.612Z,1509695541.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:22.007Z,1509695542.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:22.030Z,1509695542.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:22.396Z,1509695542.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:22.415Z,1509695542.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:22.776Z,1509695542.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:22.806Z,1509695542.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:23.179Z,1509695543.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:23.204Z,1509695543.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:23.577Z,1509695543.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:23.604Z,1509695543.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:23.996Z,1509695543.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:24.019Z,1509695544.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:24.394Z,1509695544.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:24.409Z,1509695544.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:24.803Z,1509695544.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:24.825Z,1509695544.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:25.197Z,1509695545.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:25.211Z,1509695545.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:25.579Z,1509695545.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:25.603Z,1509695545.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:25.974Z,1509695545.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:26.005Z,1509695546.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:26.376Z,1509695546.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:26.410Z,1509695546.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:26.773Z,1509695546.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:26.804Z,1509695546.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:27.176Z,1509695547.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:27.203Z,1509695547.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:27.585Z,1509695547.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:27.613Z,1509695547.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:28.027Z,1509695548.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:28.079Z,1509695548.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:28.389Z,1509695548.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:28.432Z,1509695548.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:28.776Z,1509695548.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:28.819Z,1509695548.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:29.179Z,1509695549.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:29.214Z,1509695549.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:29.577Z,1509695549.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:29.592Z,1509695549.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:29.979Z,1509695549.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:30.015Z,1509695550.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:30.412Z,1509695550.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:30.430Z,1509695550.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:30.790Z,1509695550.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:30.819Z,1509695550.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:31.190Z,1509695551.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:31.225Z,1509695551.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:31.583Z,1509695551.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:31.621Z,1509695551.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:31.975Z,1509695551.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:31.991Z,1509695551.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:32.383Z,1509695552.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:32.400Z,1509695552.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:32.784Z,1509695552.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:32.800Z,1509695552.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:33.182Z,1509695553.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:33.255Z,1509695553.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:33.597Z,1509695553.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:33.629Z,1509695553.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:33.985Z,1509695553.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:34.001Z,1509695554.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:34.397Z,1509695554.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:34.443Z,1509695554.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:34.783Z,1509695554.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:34.798Z,1509695554.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:35.175Z,1509695555.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:35.223Z,1509695555.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:35.584Z,1509695555.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:35.599Z,1509695555.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:35.975Z,1509695555.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:36.023Z,1509695556.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:36.434Z,1509695556.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:36.456Z,1509695556.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:36.798Z,1509695556.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:36.830Z,1509695556.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:37.193Z,1509695557.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:37.223Z,1509695557.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:37.581Z,1509695557.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:37.596Z,1509695557.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:37.978Z,1509695557.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:38.006Z,1509695558.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:38.384Z,1509695558.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:38.399Z,1509695558.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:38.786Z,1509695558.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:38.801Z,1509695558.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:39.183Z,1509695559.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:39.199Z,1509695559.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:39.597Z,1509695559.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:39.612Z,1509695559.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:39.997Z,1509695559.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:40.031Z,1509695560.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:40.389Z,1509695560.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:40.405Z,1509695560.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:40.786Z,1509695560.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:40.801Z,1509695560.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:41.181Z,1509695561.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:41.196Z,1509695561.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:41.587Z,1509695561.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:41.602Z,1509695561.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:42.033Z,1509695562.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:42.082Z,1509695562.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:42.393Z,1509695562.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:42.438Z,1509695562.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:42.795Z,1509695562.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:42.810Z,1509695562.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:43.192Z,1509695563.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:43.210Z,1509695563.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:43.580Z,1509695563.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:43.595Z,1509695563.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:43.986Z,1509695563.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:44.008Z,1509695564.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:44.382Z,1509695564.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:44.397Z,1509695564.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:44.790Z,1509695564.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:44.816Z,1509695564.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:45.184Z,1509695565.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:45.199Z,1509695565.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:45.592Z,1509695565.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:45.615Z,1509695565.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:45.994Z,1509695565.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:46.009Z,1509695566.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:46.406Z,1509695566.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:46.432Z,1509695566.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:46.784Z,1509695566.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:46.807Z,1509695566.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:47.178Z,1509695567.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:47.193Z,1509695567.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:47.587Z,1509695567.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:47.602Z,1509695567.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:47.982Z,1509695567.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:48.076Z,1509695568.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:48.385Z,1509695568.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:48.418Z,1509695568.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:48.797Z,1509695568.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:48.857Z,1509695568.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:49.185Z,1509695569.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:49.210Z,1509695569.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:49.579Z,1509695569.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:49.631Z,1509695569.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:49.974Z,1509695569.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:50.009Z,1509695570.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:50.398Z,1509695570.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:50.454Z,1509695570.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:50.799Z,1509695570.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:50.814Z,1509695570.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:51.197Z,1509695571.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:51.217Z,1509695571.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:51.571Z,1509695571.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:51.611Z,1509695571.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:51.975Z,1509695571.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:52.009Z,1509695572.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:52.376Z,1509695572.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:52.403Z,1509695572.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:52.773Z,1509695572.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:52.788Z,1509695572.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:53.172Z,1509695573.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:53.187Z,1509695573.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:53.589Z,1509695573.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:53.618Z,1509695573.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:54.008Z,1509695574.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:54.027Z,1509695574.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:54.389Z,1509695574.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:54.421Z,1509695574.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:54.779Z,1509695574.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:54.810Z,1509695574.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:55.178Z,1509695575.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:55.214Z,1509695575.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:55.577Z,1509695575.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:55.608Z,1509695575.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:56.026Z,1509695576.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:56.069Z,1509695576.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:56.393Z,1509695576.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:56.426Z,1509695576.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:56.789Z,1509695576.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:56.821Z,1509695576.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:57.193Z,1509695577.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:57.218Z,1509695577.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:57.580Z,1509695577.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:57.595Z,1509695577.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:57.983Z,1509695577.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:58.003Z,1509695578.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:58.461Z,1509695578.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:58.477Z,1509695578.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:58.798Z,1509695578.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:58.839Z,1509695578.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:59.193Z,1509695579.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:59.227Z,1509695579.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:59.585Z,1509695579.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:59.599Z,1509695579.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:52:59.979Z,1509695579.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:52:59.994Z,1509695579.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:00.392Z,1509695580.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:00.433Z,1509695580.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:00.780Z,1509695580.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:00.796Z,1509695580.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:01.180Z,1509695581.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:01.203Z,1509695581.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:01.594Z,1509695581.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:01.625Z,1509695581.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:01.989Z,1509695581.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:02.005Z,1509695582.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:02.397Z,1509695582.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:02.494Z,1509695582.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:02.779Z,1509695582.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:02.799Z,1509695582.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:03.186Z,1509695583.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:03.202Z,1509695583.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:03.587Z,1509695583.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:03.642Z,1509695583.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:03.982Z,1509695583.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:03.997Z,1509695583.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:04.390Z,1509695584.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:04.440Z,1509695584.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:04.793Z,1509695584.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:04.809Z,1509695584.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:05.188Z,1509695585.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:05.246Z,1509695585.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:05.586Z,1509695585.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:05.601Z,1509695585.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:05.983Z,1509695585.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:06.003Z,1509695586.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:06.390Z,1509695586.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:06.405Z,1509695586.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:06.793Z,1509695586.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:06.808Z,1509695586.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:07.189Z,1509695587.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:07.204Z,1509695587.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:07.580Z,1509695587.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:07.595Z,1509695587.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:07.986Z,1509695587.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:08.001Z,1509695588.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:08.387Z,1509695588.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:08.402Z,1509695588.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:08.788Z,1509695588.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:08.896Z,1509695588.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:09.184Z,1509695589.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:09.199Z,1509695589.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:09.590Z,1509695589.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:09.605Z,1509695589.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:10.033Z,1509695590.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:10.048Z,1509695590.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:10.390Z,1509695590.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:10.430Z,1509695590.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:10.783Z,1509695590.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:10.803Z,1509695590.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:11.186Z,1509695591.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:11.202Z,1509695591.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:11.586Z,1509695591.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:11.602Z,1509695591.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:11.986Z,1509695591.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:12.002Z,1509695592.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:12.387Z,1509695592.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:12.407Z,1509695592.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:12.789Z,1509695592.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:12.804Z,1509695592.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:13.190Z,1509695593.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:13.205Z,1509695593.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:13.586Z,1509695593.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:13.601Z,1509695593.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:13.986Z,1509695593.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:14.001Z,1509695594.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:14.385Z,1509695594.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:14.402Z,1509695594.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:14.787Z,1509695594.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:14.802Z,1509695594.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:15.184Z,1509695595.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:15.199Z,1509695595.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:15.597Z,1509695595.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:15.612Z,1509695595.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:15.997Z,1509695595.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:16.012Z,1509695596.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:16.397Z,1509695596.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:16.412Z,1509695596.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:19.568Z,1509695599.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:19.673Z,1509695599.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:19.826Z,1509695599.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:19.865Z,1509695599.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:20.225Z,1509695600.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:20.257Z,1509695600.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:20.626Z,1509695600.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:20.653Z,1509695600.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:21.018Z,1509695601.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:21.074Z,1509695601.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:21.411Z,1509695601.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:21.426Z,1509695601.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:21.837Z,1509695601.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:21.911Z,1509695601.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:22.214Z,1509695602.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:22.229Z,1509695602.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:22.618Z,1509695602.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:22.667Z,1509695602.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:23.017Z,1509695603.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:23.038Z,1509695603.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:23.415Z,1509695603.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:23.439Z,1509695603.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:23.813Z,1509695603.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:23.835Z,1509695603.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:24.206Z,1509695604.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:24.231Z,1509695604.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:24.615Z,1509695604.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:24.635Z,1509695604.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:25.010Z,1509695605.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:25.025Z,1509695605.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:25.424Z,1509695605.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:25.439Z,1509695605.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:25.822Z,1509695605.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:25.837Z,1509695605.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:26.224Z,1509695606.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:26.305Z,1509695606.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:26.614Z,1509695606.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:26.634Z,1509695606.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:27.014Z,1509695607.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:27.034Z,1509695607.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:27.412Z,1509695607.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:27.429Z,1509695607.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:27.816Z,1509695607.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:27.838Z,1509695607.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:28.215Z,1509695608.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:28.235Z,1509695608.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:28.624Z,1509695608.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:28.639Z,1509695608.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:29.026Z,1509695609.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:29.041Z,1509695609.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:29.425Z,1509695609.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:29.440Z,1509695609.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:29.807Z,1509695609.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:29.832Z,1509695609.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:30.207Z,1509695610.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:30.234Z,1509695610.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:30.618Z,1509695610.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:30.633Z,1509695610.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:31.003Z,1509695611.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:31.029Z,1509695611.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:31.426Z,1509695611.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:31.447Z,1509695611.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:31.830Z,1509695611.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:31.845Z,1509695611.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:32.226Z,1509695612.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:32.241Z,1509695612.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:32.607Z,1509695612.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:32.639Z,1509695612.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:33.005Z,1509695613.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:33.032Z,1509695613.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:33.404Z,1509695613.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:33.435Z,1509695613.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:33.824Z,1509695613.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:33.841Z,1509695613.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:34.207Z,1509695614.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:34.233Z,1509695614.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:34.625Z,1509695614.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:34.694Z,1509695614.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:35.027Z,1509695615.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:35.095Z,1509695615.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:35.425Z,1509695615.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:35.440Z,1509695615.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:35.827Z,1509695615.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:35.885Z,1509695615.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:36.207Z,1509695616.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:36.263Z,1509695616.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:36.607Z,1509695616.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:36.633Z,1509695616.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:36.633Z,1509695616.633 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 153
2017-11-03T07:53:36.633Z,1509695616.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:53:36.635Z,1509695616.635 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:36.635Z,1509695616.635 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 153
2017-11-03T07:53:36.635Z,1509695616.635 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:53:36.637Z,1509695616.637 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:36.637Z,1509695616.637 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 153
2017-11-03T07:53:36.637Z,1509695616.637 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:53:36.729Z,1509695616.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:53:36.729Z,1509695616.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:53:36.729Z,1509695616.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:53:37.017Z,1509695617.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:37.164Z,1509695617.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:53:37.165Z,1509695617.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 153
2017-11-03T07:53:37.165Z,1509695617.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:53:37.165Z,1509695617.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 153
2017-11-03T07:53:37.166Z,1509695617.166 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:53:37.166Z,1509695617.166 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 153
2017-11-03T07:53:37.417Z,1509695617.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:37.485Z,1509695617.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:53:37.486Z,1509695617.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:53:37.486Z,1509695617.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:53:37.487Z,1509695617.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:53:37.487Z,1509695617.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:53:37.487Z,1509695617.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:53:37.488Z,1509695617.488 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:53:37.488Z,1509695617.488 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:53:37.489Z,1509695617.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:53:37.817Z,1509695617.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:37.847Z,1509695617.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:38.227Z,1509695618.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:38.242Z,1509695618.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:38.604Z,1509695618.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:38.639Z,1509695618.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:39.004Z,1509695619.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:39.020Z,1509695619.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:39.404Z,1509695619.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:39.419Z,1509695619.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:39.806Z,1509695619.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:39.821Z,1509695619.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:40.207Z,1509695620.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:40.223Z,1509695620.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:40.621Z,1509695620.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:40.652Z,1509695620.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:41.021Z,1509695621.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:41.053Z,1509695621.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:41.418Z,1509695621.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:41.449Z,1509695621.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:41.814Z,1509695621.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:41.863Z,1509695621.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:42.215Z,1509695622.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:42.294Z,1509695622.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:42.617Z,1509695622.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:42.675Z,1509695622.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:43.017Z,1509695623.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:43.032Z,1509695623.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:43.424Z,1509695623.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:43.439Z,1509695623.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:43.825Z,1509695623.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:43.840Z,1509695623.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:44.227Z,1509695624.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:44.247Z,1509695624.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:44.615Z,1509695624.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:44.631Z,1509695624.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:45.014Z,1509695625.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:45.035Z,1509695625.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:45.412Z,1509695625.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:45.429Z,1509695625.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:45.804Z,1509695625.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:45.835Z,1509695625.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:46.201Z,1509695626.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:46.236Z,1509695626.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:46.624Z,1509695626.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:46.640Z,1509695626.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:47.029Z,1509695627.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:47.045Z,1509695627.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:47.425Z,1509695627.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:47.440Z,1509695627.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:47.806Z,1509695627.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:47.842Z,1509695627.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:48.208Z,1509695628.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:48.233Z,1509695628.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:48.608Z,1509695628.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:48.633Z,1509695628.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:49.005Z,1509695629.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:49.039Z,1509695629.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:49.425Z,1509695629.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:49.440Z,1509695629.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:49.840Z,1509695629.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:49.919Z,1509695629.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:50.213Z,1509695630.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:50.243Z,1509695630.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:50.604Z,1509695630.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:50.651Z,1509695630.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:51.000Z,1509695631.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:51.015Z,1509695631.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:51.406Z,1509695631.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:51.459Z,1509695631.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:51.807Z,1509695631.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:51.857Z,1509695631.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:52.215Z,1509695632.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:52.239Z,1509695632.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:52.617Z,1509695632.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:52.647Z,1509695632.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:53.030Z,1509695633.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:53.045Z,1509695633.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:53.417Z,1509695633.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:53.443Z,1509695633.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:53.807Z,1509695633.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:53.842Z,1509695633.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:54.200Z,1509695634.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:54.214Z,1509695634.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:54.612Z,1509695634.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:54.627Z,1509695634.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:55.011Z,1509695635.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:55.026Z,1509695635.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:55.425Z,1509695635.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:55.440Z,1509695635.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:55.825Z,1509695635.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:55.857Z,1509695635.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:56.217Z,1509695636.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:56.298Z,1509695636.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:56.614Z,1509695636.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:56.629Z,1509695636.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:57.014Z,1509695637.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:57.029Z,1509695637.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:57.411Z,1509695637.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:57.426Z,1509695637.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:57.816Z,1509695637.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:57.831Z,1509695637.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:58.213Z,1509695638.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:58.228Z,1509695638.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:58.615Z,1509695638.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:58.635Z,1509695638.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:59.021Z,1509695639.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:59.058Z,1509695639.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:59.418Z,1509695639.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:59.433Z,1509695639.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:53:59.815Z,1509695639.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:53:59.830Z,1509695639.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:00.215Z,1509695640.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:00.230Z,1509695640.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:00.617Z,1509695640.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:00.632Z,1509695640.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:01.013Z,1509695641.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:01.028Z,1509695641.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:01.417Z,1509695641.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:01.432Z,1509695641.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:01.823Z,1509695641.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:01.839Z,1509695641.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:02.217Z,1509695642.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:02.233Z,1509695642.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:02.615Z,1509695642.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:02.672Z,1509695642.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:03.014Z,1509695643.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:03.029Z,1509695643.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:03.412Z,1509695643.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:03.427Z,1509695643.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:03.838Z,1509695643.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:03.926Z,1509695643.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:04.212Z,1509695644.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:04.227Z,1509695644.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:04.624Z,1509695644.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:04.647Z,1509695644.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:05.021Z,1509695645.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:05.071Z,1509695645.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:05.424Z,1509695645.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:05.439Z,1509695645.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:05.813Z,1509695645.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:05.871Z,1509695645.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:06.218Z,1509695646.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:06.257Z,1509695646.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:06.614Z,1509695646.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:06.629Z,1509695646.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:07.013Z,1509695647.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:07.028Z,1509695647.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:07.426Z,1509695647.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:07.447Z,1509695647.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:07.825Z,1509695647.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:07.840Z,1509695647.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:08.224Z,1509695648.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:08.296Z,1509695648.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:08.614Z,1509695648.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:08.630Z,1509695648.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:09.012Z,1509695649.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:09.030Z,1509695649.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:09.404Z,1509695649.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:09.429Z,1509695649.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:09.801Z,1509695649.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:09.826Z,1509695649.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:10.200Z,1509695650.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:10.225Z,1509695650.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:10.587Z,1509695650.587 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T07:54:10.587Z,1509695650.587 [NAL9602] Data Fault, FailCount= 2
2017-11-03T07:54:10.587Z,1509695650.587 [NAL9602](ERROR): Data Fault
2017-11-03T07:54:10.604Z,1509695650.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:10.641Z,1509695650.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:10.717Z,1509695650.717 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T07:54:10.990Z,1509695650.990 [NAL9602](INFO): Powering down
2017-11-03T07:54:11.007Z,1509695651.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:11.038Z,1509695651.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:11.404Z,1509695651.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:11.429Z,1509695651.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:11.802Z,1509695651.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:11.828Z,1509695651.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:11.917Z,1509695651.917 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T07:54:11.917Z,1509695651.917 [NAL9602] No Fault, FailCount= 2
2017-11-03T07:54:12.206Z,1509695652.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:12.232Z,1509695652.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:12.606Z,1509695652.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:12.631Z,1509695652.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:13.004Z,1509695653.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:13.030Z,1509695653.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:13.406Z,1509695653.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:13.431Z,1509695653.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:13.803Z,1509695653.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:13.832Z,1509695653.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:14.204Z,1509695654.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:14.238Z,1509695654.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:14.604Z,1509695654.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:14.628Z,1509695654.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:15.004Z,1509695655.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:15.030Z,1509695655.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:15.404Z,1509695655.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:15.470Z,1509695655.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:15.474Z,1509695655.474 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T07:49:15.3Z
2017-11-03T07:54:15.474Z,1509695655.474 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T07:54:15.474Z,1509695655.474 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T07:54:15.808Z,1509695655.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:15.836Z,1509695655.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:16.331Z,1509695656.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:16.351Z,1509695656.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:16.607Z,1509695656.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:16.639Z,1509695656.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:19.818Z,1509695659.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:19.891Z,1509695659.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:20.022Z,1509695660.022 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20171103T001125/Courier0180.lzma
2017-11-03T07:54:20.057Z,1509695660.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:20.103Z,1509695660.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:20.432Z,1509695660.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:20.463Z,1509695660.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:20.807Z,1509695660.807 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0180.lzma.bak
2017-11-03T07:54:20.808Z,1509695660.808 [DataOverHttps](INFO): SBD MOMSN=5183068
2017-11-03T07:54:20.833Z,1509695660.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:20.905Z,1509695660.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:21.452Z,1509695661.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:21.467Z,1509695661.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:21.632Z,1509695661.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:21.710Z,1509695661.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:24.925Z,1509695664.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:24.971Z,1509695664.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:25.095Z,1509695665.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:25.143Z,1509695665.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:25.506Z,1509695665.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:25.521Z,1509695665.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:25.906Z,1509695665.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:25.924Z,1509695665.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:26.307Z,1509695666.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:26.327Z,1509695666.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:26.708Z,1509695666.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:26.723Z,1509695666.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:30.026Z,1509695670.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:30.042Z,1509695670.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:30.159Z,1509695670.159 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171103T001125/Express0181.lzma
2017-11-03T07:54:30.179Z,1509695670.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:30.230Z,1509695670.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:30.585Z,1509695670.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:30.618Z,1509695670.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:30.963Z,1509695670.963 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0181.lzma.bak
2017-11-03T07:54:30.963Z,1509695670.963 [DataOverHttps](INFO): SBD MOMSN=5183070
2017-11-03T07:54:30.985Z,1509695670.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:31.023Z,1509695671.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:31.589Z,1509695671.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:31.621Z,1509695671.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:31.627Z,1509695671.627 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T07:54:31.627Z,1509695671.627 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T07:54:31.627Z,1509695671.627 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T07:54:31.839Z,1509695671.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:31.883Z,1509695671.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:35.005Z,1509695675.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:35.027Z,1509695675.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:35.156Z,1509695675.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:35.240Z,1509695675.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:35.558Z,1509695675.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:35.584Z,1509695675.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:35.963Z,1509695675.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:35.988Z,1509695675.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:36.355Z,1509695676.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:36.387Z,1509695676.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:36.759Z,1509695676.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:36.791Z,1509695676.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:37.159Z,1509695677.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:37.211Z,1509695677.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:37.556Z,1509695677.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:37.589Z,1509695677.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:37.956Z,1509695677.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:38.003Z,1509695678.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:38.358Z,1509695678.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:38.373Z,1509695678.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:38.756Z,1509695678.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:38.807Z,1509695678.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:39.156Z,1509695679.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:39.171Z,1509695679.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:39.552Z,1509695679.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:39.600Z,1509695679.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:39.956Z,1509695679.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:39.971Z,1509695679.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:40.359Z,1509695680.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:40.379Z,1509695680.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:40.754Z,1509695680.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:40.769Z,1509695680.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:41.138Z,1509695681.138 [NAL9602](INFO): Powering up NAL9602
2017-11-03T07:54:41.156Z,1509695681.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:41.175Z,1509695681.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:41.559Z,1509695681.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:41.573Z,1509695681.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:41.962Z,1509695681.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:41.977Z,1509695681.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:42.359Z,1509695682.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:42.374Z,1509695682.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:42.763Z,1509695682.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:42.777Z,1509695682.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:43.163Z,1509695683.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:43.177Z,1509695683.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:43.563Z,1509695683.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:43.578Z,1509695683.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:43.962Z,1509695683.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:43.977Z,1509695683.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:44.362Z,1509695684.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:44.376Z,1509695684.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:44.760Z,1509695684.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:44.775Z,1509695684.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:45.162Z,1509695685.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:45.177Z,1509695685.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:45.563Z,1509695685.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:45.577Z,1509695685.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:45.961Z,1509695685.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:45.976Z,1509695685.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:46.363Z,1509695686.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:46.378Z,1509695686.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:46.763Z,1509695686.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:46.777Z,1509695686.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:47.163Z,1509695687.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:47.178Z,1509695687.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:47.562Z,1509695687.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:47.577Z,1509695687.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:48.004Z,1509695688.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:48.035Z,1509695688.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:48.365Z,1509695688.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:48.404Z,1509695688.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:48.763Z,1509695688.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:48.778Z,1509695688.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:49.165Z,1509695689.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:49.179Z,1509695689.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:49.565Z,1509695689.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:49.580Z,1509695689.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:49.963Z,1509695689.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:49.978Z,1509695689.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:50.366Z,1509695690.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:50.414Z,1509695690.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:50.766Z,1509695690.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:50.781Z,1509695690.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:51.163Z,1509695691.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:51.178Z,1509695691.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:51.573Z,1509695691.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:51.587Z,1509695691.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:51.942Z,1509695691.942 [NAL9602](INFO): NAL9602 initialized
2017-11-03T07:54:51.970Z,1509695691.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:51.990Z,1509695691.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:52.367Z,1509695692.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:52.382Z,1509695692.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:52.772Z,1509695692.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:52.787Z,1509695692.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:53.173Z,1509695693.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:53.189Z,1509695693.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:53.573Z,1509695693.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:53.588Z,1509695693.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:53.962Z,1509695693.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:53.982Z,1509695693.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:54.366Z,1509695694.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:54.387Z,1509695694.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:54.769Z,1509695694.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:54.777Z,1509695694.777 [BPC1](ERROR): Failed to receive battery data
2017-11-03T07:54:54.777Z,1509695694.777 [BPC1] Communications Fault, FailCount= 1
2017-11-03T07:54:54.777Z,1509695694.777 [BPC1](ERROR): Communications Fault
2017-11-03T07:54:54.786Z,1509695694.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:54.877Z,1509695694.877 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T07:54:55.168Z,1509695695.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:55.183Z,1509695695.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:55.560Z,1509695695.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:55.638Z,1509695695.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:55.971Z,1509695695.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:55.986Z,1509695695.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:56.072Z,1509695696.072 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:54:56.073Z,1509695696.073 [BPC1] No Fault, FailCount= 1
2017-11-03T07:54:56.373Z,1509695696.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:56.456Z,1509695696.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:56.572Z,1509695696.572 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T07:54:56.572Z,1509695696.572 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T07:54:56.572Z,1509695696.572 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T07:54:56.772Z,1509695696.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:56.786Z,1509695696.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.3 s old, using for 20.0 s.
2017-11-03T07:54:56.787Z,1509695696.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:56.881Z,1509695696.881 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T07:54:56.881Z,1509695696.881 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T07:54:56.977Z,1509695696.977 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T07:54:57.070Z,1509695697.070 [Rowe_600LCM](INFO): Powering down
2017-11-03T07:54:57.167Z,1509695697.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:57.184Z,1509695697.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.7 s old, using for 20.0 s.
2017-11-03T07:54:57.185Z,1509695697.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:57.565Z,1509695697.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:57.580Z,1509695697.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-03T07:54:57.581Z,1509695697.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:57.965Z,1509695697.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:57.981Z,1509695697.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-03T07:54:57.982Z,1509695697.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:58.366Z,1509695698.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:58.386Z,1509695698.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-03T07:54:58.387Z,1509695698.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:58.777Z,1509695698.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:58.798Z,1509695698.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T07:54:58.799Z,1509695698.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:59.176Z,1509695699.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:59.191Z,1509695699.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-11-03T07:54:59.192Z,1509695699.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:59.576Z,1509695699.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:59.598Z,1509695699.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-11-03T07:54:59.599Z,1509695699.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:54:59.964Z,1509695699.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:54:59.979Z,1509695699.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T07:54:59.980Z,1509695699.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:00.367Z,1509695700.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:00.428Z,1509695700.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:55:00.429Z,1509695700.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:00.767Z,1509695700.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:00.786Z,1509695700.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T07:55:00.787Z,1509695700.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:01.167Z,1509695701.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:01.182Z,1509695701.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T07:55:01.182Z,1509695701.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:01.588Z,1509695701.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:01.603Z,1509695701.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T07:55:01.604Z,1509695701.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:01.977Z,1509695701.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:01.992Z,1509695701.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T07:55:01.993Z,1509695701.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:02.381Z,1509695702.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:02.396Z,1509695702.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T07:55:02.397Z,1509695702.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:02.774Z,1509695702.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:02.789Z,1509695702.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T07:55:02.790Z,1509695702.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:03.159Z,1509695703.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:03.183Z,1509695703.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-03T07:55:03.185Z,1509695703.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:03.553Z,1509695703.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:03.581Z,1509695703.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T07:55:03.582Z,1509695703.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:03.956Z,1509695703.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:03.985Z,1509695703.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-03T07:55:03.986Z,1509695703.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:04.359Z,1509695704.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:04.384Z,1509695704.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-03T07:55:04.385Z,1509695704.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:04.778Z,1509695704.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:04.798Z,1509695704.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-03T07:55:04.799Z,1509695704.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:05.173Z,1509695705.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:05.187Z,1509695705.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-03T07:55:05.188Z,1509695705.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:05.577Z,1509695705.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:05.591Z,1509695705.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-03T07:55:05.592Z,1509695705.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:05.959Z,1509695705.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:05.984Z,1509695705.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-03T07:55:05.985Z,1509695705.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:06.352Z,1509695706.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:06.381Z,1509695706.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-03T07:55:06.382Z,1509695706.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:06.759Z,1509695706.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:06.783Z,1509695706.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-03T07:55:06.785Z,1509695706.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:07.160Z,1509695707.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:07.185Z,1509695707.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-03T07:55:07.186Z,1509695707.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:07.559Z,1509695707.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:07.590Z,1509695707.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T07:55:07.591Z,1509695707.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:07.977Z,1509695707.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:07.991Z,1509695707.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T07:55:07.992Z,1509695707.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:08.382Z,1509695708.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:08.396Z,1509695708.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-03T07:55:08.397Z,1509695708.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:08.776Z,1509695708.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:08.791Z,1509695708.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-03T07:55:08.793Z,1509695708.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:09.159Z,1509695709.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:09.183Z,1509695709.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-03T07:55:09.184Z,1509695709.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:09.559Z,1509695709.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:09.584Z,1509695709.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-03T07:55:09.585Z,1509695709.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:09.952Z,1509695709.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:09.981Z,1509695709.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-03T07:55:09.982Z,1509695709.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:10.359Z,1509695710.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:10.383Z,1509695710.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-03T07:55:10.384Z,1509695710.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:10.782Z,1509695710.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:10.797Z,1509695710.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-03T07:55:10.798Z,1509695710.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:11.181Z,1509695711.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:11.258Z,1509695711.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:55:11.259Z,1509695711.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:11.576Z,1509695711.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:11.591Z,1509695711.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T07:55:11.592Z,1509695711.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:11.959Z,1509695711.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:12.029Z,1509695712.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:55:12.030Z,1509695712.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:12.357Z,1509695712.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:12.385Z,1509695712.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-03T07:55:12.386Z,1509695712.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:12.759Z,1509695712.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:12.831Z,1509695712.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:55:12.833Z,1509695712.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:13.154Z,1509695713.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:13.206Z,1509695713.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:55:13.207Z,1509695713.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:13.556Z,1509695713.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:13.586Z,1509695713.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T07:55:13.587Z,1509695713.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:13.982Z,1509695713.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:13.997Z,1509695713.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T07:55:13.998Z,1509695713.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:14.382Z,1509695714.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:14.397Z,1509695714.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T07:55:14.398Z,1509695714.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:14.778Z,1509695714.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:14.798Z,1509695714.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-03T07:55:14.799Z,1509695714.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:15.160Z,1509695715.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:15.186Z,1509695715.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-03T07:55:15.187Z,1509695715.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:15.560Z,1509695715.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:15.586Z,1509695715.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T07:55:15.587Z,1509695715.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:15.960Z,1509695715.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:15.986Z,1509695715.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-03T07:55:15.987Z,1509695715.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:16.359Z,1509695716.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:16.390Z,1509695716.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-03T07:55:16.391Z,1509695716.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:16.779Z,1509695716.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:16.794Z,1509695716.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:17.182Z,1509695717.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:17.197Z,1509695717.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:17.578Z,1509695717.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:17.593Z,1509695717.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:17.959Z,1509695717.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:17.985Z,1509695717.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:18.359Z,1509695718.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:18.383Z,1509695718.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:18.759Z,1509695718.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:18.783Z,1509695718.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:19.159Z,1509695719.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:19.184Z,1509695719.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:19.559Z,1509695719.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:19.583Z,1509695719.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:19.977Z,1509695719.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:19.992Z,1509695719.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:20.381Z,1509695720.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:20.396Z,1509695720.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:20.776Z,1509695720.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:20.791Z,1509695720.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:21.159Z,1509695721.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:21.184Z,1509695721.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:21.559Z,1509695721.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:21.590Z,1509695721.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:21.951Z,1509695721.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:21.985Z,1509695721.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:22.359Z,1509695722.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:22.384Z,1509695722.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:22.777Z,1509695722.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:22.792Z,1509695722.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:23.181Z,1509695723.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:23.196Z,1509695723.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:23.576Z,1509695723.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:23.591Z,1509695723.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:23.959Z,1509695723.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:24.040Z,1509695724.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:24.353Z,1509695724.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:24.368Z,1509695724.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:24.757Z,1509695724.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:24.807Z,1509695724.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:25.159Z,1509695725.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:25.196Z,1509695725.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:25.553Z,1509695725.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:25.607Z,1509695725.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:25.969Z,1509695725.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:26.035Z,1509695726.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:26.382Z,1509695726.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:26.396Z,1509695726.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:26.766Z,1509695726.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:26.791Z,1509695726.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:27.156Z,1509695727.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:27.171Z,1509695727.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:27.559Z,1509695727.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:27.596Z,1509695727.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:27.953Z,1509695727.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:27.991Z,1509695727.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:28.356Z,1509695728.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:28.371Z,1509695728.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:28.769Z,1509695728.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:28.797Z,1509695728.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:29.169Z,1509695729.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:29.195Z,1509695729.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:29.569Z,1509695729.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:29.596Z,1509695729.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:29.959Z,1509695729.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:29.973Z,1509695729.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:30.357Z,1509695730.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:30.371Z,1509695730.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:30.756Z,1509695730.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:30.771Z,1509695730.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:31.153Z,1509695731.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:31.167Z,1509695731.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:31.556Z,1509695731.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:31.571Z,1509695731.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:31.969Z,1509695731.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:31.995Z,1509695731.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:32.373Z,1509695732.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:32.402Z,1509695732.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:35.514Z,1509695735.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:35.544Z,1509695735.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:35.720Z,1509695735.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:35.751Z,1509695735.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:36.124Z,1509695736.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:36.150Z,1509695736.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:36.523Z,1509695736.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:36.615Z,1509695736.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:36.942Z,1509695736.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:36.957Z,1509695736.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:37.345Z,1509695737.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:37.395Z,1509695737.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:37.742Z,1509695737.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:37.757Z,1509695737.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:38.121Z,1509695738.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:38.179Z,1509695738.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:38.523Z,1509695738.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:38.554Z,1509695738.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:38.918Z,1509695738.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:38.967Z,1509695738.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:39.321Z,1509695739.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:39.352Z,1509695739.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:39.742Z,1509695739.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:39.757Z,1509695739.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:40.134Z,1509695740.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:40.159Z,1509695740.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:40.534Z,1509695740.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:40.559Z,1509695740.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:40.923Z,1509695740.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:40.937Z,1509695740.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:41.321Z,1509695741.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:41.336Z,1509695741.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:41.721Z,1509695741.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:41.736Z,1509695741.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:42.124Z,1509695742.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:42.138Z,1509695742.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:42.523Z,1509695742.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:42.564Z,1509695742.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:42.934Z,1509695742.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:42.959Z,1509695742.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:43.337Z,1509695743.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:43.363Z,1509695743.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:43.734Z,1509695743.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:43.759Z,1509695743.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:44.121Z,1509695744.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:44.136Z,1509695744.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:44.523Z,1509695744.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:44.537Z,1509695744.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:44.922Z,1509695744.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:44.937Z,1509695744.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:45.321Z,1509695745.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:45.336Z,1509695745.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:45.733Z,1509695745.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:45.766Z,1509695745.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:46.134Z,1509695746.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:46.159Z,1509695746.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:46.534Z,1509695746.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:46.560Z,1509695746.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:46.924Z,1509695746.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:46.938Z,1509695746.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:47.321Z,1509695747.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:47.336Z,1509695747.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:47.734Z,1509695747.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:47.767Z,1509695747.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:48.137Z,1509695748.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:48.163Z,1509695748.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:48.534Z,1509695748.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:48.553Z,1509695748.553 [BPC1](ERROR): Failed to parse message.
2017-11-03T07:55:48.553Z,1509695748.553 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T07:55:48.553Z,1509695748.553 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:55:48.553Z,1509695748.553 [BPC1](ERROR): Data Fault
2017-11-03T07:55:48.567Z,1509695748.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:48.645Z,1509695748.645 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:55:48.927Z,1509695748.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:48.959Z,1509695748.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:49.327Z,1509695749.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:49.363Z,1509695749.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:49.720Z,1509695749.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:49.735Z,1509695749.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:49.833Z,1509695749.833 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:55:49.833Z,1509695749.833 [BPC1] No Fault, FailCount= 1
2017-11-03T07:55:50.128Z,1509695750.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:50.210Z,1509695750.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:50.520Z,1509695750.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:50.534Z,1509695750.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:50.934Z,1509695750.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:50.991Z,1509695750.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:51.334Z,1509695751.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:51.363Z,1509695751.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:51.734Z,1509695751.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:51.758Z,1509695751.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:52.125Z,1509695752.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:52.140Z,1509695752.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:52.527Z,1509695752.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:52.559Z,1509695752.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:52.921Z,1509695752.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:52.935Z,1509695752.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:53.321Z,1509695753.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:53.336Z,1509695753.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:53.734Z,1509695753.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:53.763Z,1509695753.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:54.133Z,1509695754.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:54.158Z,1509695754.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:54.535Z,1509695754.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:54.563Z,1509695754.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:54.920Z,1509695754.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:54.936Z,1509695754.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:55.319Z,1509695755.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:55.335Z,1509695755.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:55.720Z,1509695755.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:55.736Z,1509695755.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:56.120Z,1509695756.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:56.136Z,1509695756.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:56.519Z,1509695756.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:56.534Z,1509695756.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:56.934Z,1509695756.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:56.963Z,1509695756.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:57.334Z,1509695757.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:57.359Z,1509695757.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:57.733Z,1509695757.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:57.760Z,1509695757.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:58.117Z,1509695758.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:58.132Z,1509695758.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:58.520Z,1509695758.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:58.535Z,1509695758.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:58.924Z,1509695758.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:58.939Z,1509695758.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:59.323Z,1509695759.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:59.339Z,1509695759.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:55:59.734Z,1509695759.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:55:59.759Z,1509695759.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:00.134Z,1509695760.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:00.162Z,1509695760.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:00.534Z,1509695760.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:00.563Z,1509695760.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:00.920Z,1509695760.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:00.935Z,1509695760.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:01.320Z,1509695761.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:01.377Z,1509695761.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:01.720Z,1509695761.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:01.774Z,1509695761.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:02.125Z,1509695762.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:02.140Z,1509695762.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:02.520Z,1509695762.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:02.534Z,1509695762.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:02.937Z,1509695762.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:02.995Z,1509695762.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:03.337Z,1509695763.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:03.363Z,1509695763.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:03.737Z,1509695763.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:03.787Z,1509695763.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:04.125Z,1509695764.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:04.170Z,1509695764.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:04.525Z,1509695764.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:04.540Z,1509695764.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:04.928Z,1509695764.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:04.942Z,1509695764.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:05.325Z,1509695765.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:05.340Z,1509695765.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:05.737Z,1509695765.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:05.767Z,1509695765.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:06.139Z,1509695766.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:06.175Z,1509695766.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:06.544Z,1509695766.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:06.579Z,1509695766.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:06.922Z,1509695766.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:06.937Z,1509695766.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:07.341Z,1509695767.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:07.390Z,1509695767.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:07.766Z,1509695767.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:07.792Z,1509695767.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:08.130Z,1509695768.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:08.155Z,1509695768.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:08.562Z,1509695768.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:08.614Z,1509695768.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:08.941Z,1509695768.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:08.985Z,1509695768.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:09.344Z,1509695769.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:09.390Z,1509695769.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:09.738Z,1509695769.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:09.819Z,1509695769.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:10.126Z,1509695770.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:10.169Z,1509695770.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:10.531Z,1509695770.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:10.547Z,1509695770.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:10.942Z,1509695770.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:10.977Z,1509695770.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:11.329Z,1509695771.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:11.364Z,1509695771.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:11.732Z,1509695771.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:11.748Z,1509695771.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:12.143Z,1509695772.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:12.188Z,1509695772.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:12.534Z,1509695772.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:12.579Z,1509695772.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:12.927Z,1509695772.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:12.987Z,1509695772.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:13.330Z,1509695773.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:13.373Z,1509695773.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:13.727Z,1509695773.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:13.751Z,1509695773.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:14.129Z,1509695774.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:14.177Z,1509695774.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:14.552Z,1509695774.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:14.600Z,1509695774.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:14.934Z,1509695774.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:14.988Z,1509695774.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:15.342Z,1509695775.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:15.367Z,1509695775.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:15.740Z,1509695775.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:15.766Z,1509695775.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:16.121Z,1509695776.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:16.198Z,1509695776.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:16.521Z,1509695776.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:16.550Z,1509695776.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:16.921Z,1509695776.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:16.988Z,1509695776.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:17.321Z,1509695777.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:17.399Z,1509695777.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:17.740Z,1509695777.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:17.771Z,1509695777.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:18.143Z,1509695778.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:18.178Z,1509695778.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:18.541Z,1509695778.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:18.565Z,1509695778.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:18.921Z,1509695778.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:18.956Z,1509695778.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:19.333Z,1509695779.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:19.378Z,1509695779.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:19.737Z,1509695779.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:19.767Z,1509695779.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:20.130Z,1509695780.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:20.190Z,1509695780.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:20.529Z,1509695780.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:20.586Z,1509695780.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:20.943Z,1509695780.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:20.975Z,1509695780.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:21.349Z,1509695781.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:21.379Z,1509695781.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:21.737Z,1509695781.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:21.752Z,1509695781.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:22.124Z,1509695782.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:22.139Z,1509695782.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:22.524Z,1509695782.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:22.539Z,1509695782.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:22.924Z,1509695782.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:22.939Z,1509695782.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:23.333Z,1509695783.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:23.348Z,1509695783.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:23.737Z,1509695783.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:23.752Z,1509695783.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:24.141Z,1509695784.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:24.186Z,1509695784.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:24.537Z,1509695784.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:24.569Z,1509695784.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:24.924Z,1509695784.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:24.939Z,1509695784.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:25.324Z,1509695785.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:25.338Z,1509695785.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:25.724Z,1509695785.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:25.739Z,1509695785.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:26.136Z,1509695786.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:26.151Z,1509695786.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:26.524Z,1509695786.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:26.539Z,1509695786.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:26.937Z,1509695786.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:26.968Z,1509695786.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:27.337Z,1509695787.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:27.369Z,1509695787.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:27.741Z,1509695787.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:27.749Z,1509695787.749 [BPC1](ERROR): Failed to parse message.
2017-11-03T07:56:27.749Z,1509695787.749 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T07:56:27.749Z,1509695787.749 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:56:27.749Z,1509695787.749 [BPC1](ERROR): Data Fault
2017-11-03T07:56:27.786Z,1509695787.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:27.865Z,1509695787.865 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:56:28.125Z,1509695788.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:28.141Z,1509695788.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:28.528Z,1509695788.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:28.550Z,1509695788.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:28.929Z,1509695788.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:28.943Z,1509695788.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:29.049Z,1509695789.049 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:56:29.049Z,1509695789.049 [BPC1] No Fault, FailCount= 1
2017-11-03T07:56:29.328Z,1509695789.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:29.414Z,1509695789.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:29.734Z,1509695789.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:29.771Z,1509695789.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:30.133Z,1509695790.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:30.148Z,1509695790.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:30.530Z,1509695790.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:30.587Z,1509695790.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:30.929Z,1509695790.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:30.944Z,1509695790.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:31.329Z,1509695791.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:31.343Z,1509695791.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:31.729Z,1509695791.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:31.744Z,1509695791.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:32.129Z,1509695792.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:32.151Z,1509695792.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:32.530Z,1509695792.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:32.545Z,1509695792.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:35.660Z,1509695795.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:35.683Z,1509695795.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:35.845Z,1509695795.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:35.879Z,1509695795.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:36.228Z,1509695796.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:36.251Z,1509695796.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:36.618Z,1509695796.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:36.639Z,1509695796.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:37.021Z,1509695797.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:37.036Z,1509695797.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:37.423Z,1509695797.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:37.438Z,1509695797.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:37.828Z,1509695797.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:37.851Z,1509695797.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:37.851Z,1509695797.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 154
2017-11-03T07:56:37.851Z,1509695797.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:56:37.869Z,1509695797.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:37.869Z,1509695797.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 154
2017-11-03T07:56:37.869Z,1509695797.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:56:37.871Z,1509695797.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:37.871Z,1509695797.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 154
2017-11-03T07:56:37.871Z,1509695797.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:56:37.969Z,1509695797.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:56:37.969Z,1509695797.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:56:37.969Z,1509695797.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:56:38.232Z,1509695798.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:38.325Z,1509695798.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:56:38.325Z,1509695798.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 154
2017-11-03T07:56:38.325Z,1509695798.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:56:38.325Z,1509695798.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 154
2017-11-03T07:56:38.326Z,1509695798.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:56:38.326Z,1509695798.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 154
2017-11-03T07:56:38.629Z,1509695798.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:38.643Z,1509695798.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:56:38.643Z,1509695798.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:56:38.644Z,1509695798.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:56:38.644Z,1509695798.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:56:38.645Z,1509695798.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:56:38.645Z,1509695798.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:56:38.645Z,1509695798.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:56:38.646Z,1509695798.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:56:38.646Z,1509695798.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:56:39.007Z,1509695799.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:39.037Z,1509695799.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:56:39.038Z,1509695799.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:39.422Z,1509695799.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:39.436Z,1509695799.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:56:39.437Z,1509695799.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:39.826Z,1509695799.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:39.840Z,1509695799.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:56:39.841Z,1509695799.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:40.224Z,1509695800.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:40.239Z,1509695800.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:56:40.240Z,1509695800.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:40.612Z,1509695800.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:40.638Z,1509695800.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:56:40.639Z,1509695800.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:41.033Z,1509695801.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:41.096Z,1509695801.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:56:41.097Z,1509695801.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:41.436Z,1509695801.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:41.451Z,1509695801.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:56:41.452Z,1509695801.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:41.833Z,1509695801.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:41.848Z,1509695801.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:56:41.849Z,1509695801.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:42.223Z,1509695802.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:42.238Z,1509695802.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:56:42.239Z,1509695802.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:42.622Z,1509695802.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:42.662Z,1509695802.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:56:42.663Z,1509695802.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:43.015Z,1509695803.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:43.041Z,1509695803.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:56:43.042Z,1509695803.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:43.412Z,1509695803.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:43.443Z,1509695803.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:56:43.444Z,1509695803.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:43.833Z,1509695803.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:43.889Z,1509695803.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:56:43.890Z,1509695803.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:44.233Z,1509695804.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:44.248Z,1509695804.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:56:44.249Z,1509695804.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:44.633Z,1509695804.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:44.683Z,1509695804.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:56:44.684Z,1509695804.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:45.008Z,1509695805.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:45.078Z,1509695805.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:56:45.079Z,1509695805.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:45.413Z,1509695805.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:45.437Z,1509695805.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:56:45.438Z,1509695805.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:45.815Z,1509695805.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:45.840Z,1509695805.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:56:45.841Z,1509695805.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:46.211Z,1509695806.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:46.230Z,1509695806.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:56:46.231Z,1509695806.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:46.611Z,1509695806.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:46.626Z,1509695806.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:56:46.627Z,1509695806.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:47.025Z,1509695807.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:47.056Z,1509695807.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T07:56:47.057Z,1509695807.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:47.426Z,1509695807.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:47.455Z,1509695807.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:56:47.456Z,1509695807.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:47.830Z,1509695807.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:47.852Z,1509695807.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:56:47.853Z,1509695807.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:48.211Z,1509695808.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:48.226Z,1509695808.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:56:48.226Z,1509695808.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:48.612Z,1509695808.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:48.627Z,1509695808.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:56:48.628Z,1509695808.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:49.012Z,1509695809.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:49.027Z,1509695809.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:56:49.028Z,1509695809.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:49.411Z,1509695809.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:49.425Z,1509695809.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:56:49.426Z,1509695809.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:49.825Z,1509695809.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:49.856Z,1509695809.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:56:49.857Z,1509695809.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:50.225Z,1509695810.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:50.256Z,1509695810.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:56:50.257Z,1509695810.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:50.625Z,1509695810.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:50.657Z,1509695810.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:56:50.658Z,1509695810.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:51.012Z,1509695811.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:51.027Z,1509695811.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:56:51.028Z,1509695811.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:51.418Z,1509695811.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:51.454Z,1509695811.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:56:51.455Z,1509695811.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:51.816Z,1509695811.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:51.830Z,1509695811.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:56:51.831Z,1509695811.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:52.218Z,1509695812.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:52.233Z,1509695812.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:56:52.234Z,1509695812.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:52.618Z,1509695812.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:52.638Z,1509695812.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:56:52.639Z,1509695812.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:53.025Z,1509695813.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:53.059Z,1509695813.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:56:53.061Z,1509695813.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:53.425Z,1509695813.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:53.440Z,1509695813.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:56:53.457Z,1509695813.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:53.829Z,1509695813.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:53.844Z,1509695813.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:56:53.861Z,1509695813.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:54.220Z,1509695814.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:54.235Z,1509695814.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:56:54.236Z,1509695814.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:54.621Z,1509695814.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:54.635Z,1509695814.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:56:54.637Z,1509695814.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:55.021Z,1509695815.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:55.042Z,1509695815.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:56:55.043Z,1509695815.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:55.419Z,1509695815.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:55.475Z,1509695815.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:56:55.476Z,1509695815.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:55.561Z,1509695815.561 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T07:56:55.561Z,1509695815.561 [DropWeight] No Fault, FailCount= 1
2017-11-03T07:56:55.830Z,1509695815.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:55.845Z,1509695815.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:56:55.846Z,1509695815.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:56.226Z,1509695816.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:56.241Z,1509695816.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:56:56.242Z,1509695816.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:56.630Z,1509695816.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:56.644Z,1509695816.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:56:56.645Z,1509695816.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:57.022Z,1509695817.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:57.038Z,1509695817.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:56:57.039Z,1509695817.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:57.420Z,1509695817.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:57.486Z,1509695817.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:56:57.486Z,1509695817.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:57.818Z,1509695817.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:57.833Z,1509695817.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T07:56:57.834Z,1509695817.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:58.223Z,1509695818.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:58.282Z,1509695818.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:58.620Z,1509695818.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:58.635Z,1509695818.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:59.033Z,1509695819.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:59.078Z,1509695819.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:59.432Z,1509695819.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:59.483Z,1509695819.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:56:59.832Z,1509695819.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:56:59.847Z,1509695819.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:00.223Z,1509695820.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:00.238Z,1509695820.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:00.617Z,1509695820.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:00.632Z,1509695820.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:01.021Z,1509695821.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:01.036Z,1509695821.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:01.423Z,1509695821.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:01.437Z,1509695821.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:01.832Z,1509695821.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:01.847Z,1509695821.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:02.231Z,1509695822.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:02.251Z,1509695822.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:02.632Z,1509695822.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:02.647Z,1509695822.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:03.023Z,1509695823.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:03.043Z,1509695823.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:03.420Z,1509695823.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:03.435Z,1509695823.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:03.823Z,1509695823.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:03.838Z,1509695823.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:04.223Z,1509695824.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:04.243Z,1509695824.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:04.620Z,1509695824.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:04.643Z,1509695824.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:05.032Z,1509695825.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:05.046Z,1509695825.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:05.432Z,1509695825.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:05.447Z,1509695825.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:05.832Z,1509695825.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:05.847Z,1509695825.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:06.221Z,1509695826.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:06.235Z,1509695826.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:06.623Z,1509695826.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:06.643Z,1509695826.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:07.021Z,1509695827.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:07.036Z,1509695827.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:07.423Z,1509695827.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:07.438Z,1509695827.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:07.832Z,1509695827.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:07.847Z,1509695827.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:08.232Z,1509695828.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:08.247Z,1509695828.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:08.632Z,1509695828.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:08.647Z,1509695828.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:09.022Z,1509695829.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:09.037Z,1509695829.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:09.420Z,1509695829.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:09.435Z,1509695829.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:09.823Z,1509695829.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:09.855Z,1509695829.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:10.223Z,1509695830.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:10.243Z,1509695830.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:10.622Z,1509695830.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:10.643Z,1509695830.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:11.032Z,1509695831.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:11.047Z,1509695831.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:11.432Z,1509695831.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:11.455Z,1509695831.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:11.832Z,1509695831.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:11.894Z,1509695831.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:12.215Z,1509695832.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:12.240Z,1509695832.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:12.615Z,1509695832.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:12.682Z,1509695832.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:13.013Z,1509695833.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:13.043Z,1509695833.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:13.413Z,1509695833.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:13.463Z,1509695833.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:13.827Z,1509695833.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:13.886Z,1509695833.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:14.237Z,1509695834.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:14.252Z,1509695834.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:14.637Z,1509695834.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:14.658Z,1509695834.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:15.015Z,1509695835.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:15.041Z,1509695835.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:15.412Z,1509695835.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:15.438Z,1509695835.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:15.815Z,1509695835.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:15.841Z,1509695835.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:16.216Z,1509695836.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:16.241Z,1509695836.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:16.612Z,1509695836.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:16.642Z,1509695836.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:17.033Z,1509695837.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:17.048Z,1509695837.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:17.432Z,1509695837.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:17.447Z,1509695837.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:17.832Z,1509695837.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:17.847Z,1509695837.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:18.213Z,1509695838.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:18.248Z,1509695838.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:18.615Z,1509695838.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:18.641Z,1509695838.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:19.014Z,1509695839.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:19.067Z,1509695839.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:19.413Z,1509695839.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:19.442Z,1509695839.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:19.833Z,1509695839.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:19.848Z,1509695839.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:20.233Z,1509695840.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:20.248Z,1509695840.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:20.638Z,1509695840.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:20.653Z,1509695840.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:21.016Z,1509695841.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:21.041Z,1509695841.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:21.412Z,1509695841.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:21.441Z,1509695841.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:21.813Z,1509695841.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:21.848Z,1509695841.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:22.208Z,1509695842.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:22.243Z,1509695842.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:22.612Z,1509695842.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:22.642Z,1509695842.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:23.032Z,1509695843.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:23.052Z,1509695843.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:23.437Z,1509695843.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:23.453Z,1509695843.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:23.833Z,1509695843.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:23.849Z,1509695843.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:24.212Z,1509695844.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:24.243Z,1509695844.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:24.615Z,1509695844.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:24.641Z,1509695844.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:25.014Z,1509695845.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:25.039Z,1509695845.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:25.415Z,1509695845.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:25.442Z,1509695845.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:25.833Z,1509695845.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:25.848Z,1509695845.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:26.231Z,1509695846.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:26.295Z,1509695846.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:26.634Z,1509695846.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:26.649Z,1509695846.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:27.015Z,1509695847.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:27.045Z,1509695847.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:27.412Z,1509695847.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:27.444Z,1509695847.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:27.815Z,1509695847.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:27.867Z,1509695847.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:28.216Z,1509695848.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:28.247Z,1509695848.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:28.612Z,1509695848.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:28.659Z,1509695848.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:29.029Z,1509695849.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:29.092Z,1509695849.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:29.429Z,1509695849.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:29.462Z,1509695849.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:29.825Z,1509695849.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:29.852Z,1509695849.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:30.213Z,1509695850.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:30.228Z,1509695850.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:30.616Z,1509695850.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:30.631Z,1509695850.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:31.014Z,1509695851.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:31.029Z,1509695851.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:31.419Z,1509695851.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:31.450Z,1509695851.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:31.826Z,1509695851.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:31.856Z,1509695851.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:32.226Z,1509695852.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:32.257Z,1509695852.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:32.630Z,1509695852.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:32.655Z,1509695852.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:35.730Z,1509695855.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:35.752Z,1509695855.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:35.901Z,1509695855.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:35.935Z,1509695855.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:36.301Z,1509695856.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:36.317Z,1509695856.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:36.712Z,1509695856.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:36.727Z,1509695856.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:37.108Z,1509695857.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:37.123Z,1509695857.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:37.489Z,1509695857.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:37.520Z,1509695857.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:37.889Z,1509695857.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:37.921Z,1509695857.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:38.289Z,1509695858.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:38.325Z,1509695858.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:38.702Z,1509695858.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:38.728Z,1509695858.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:39.116Z,1509695859.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:39.131Z,1509695859.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:39.506Z,1509695859.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:39.530Z,1509695859.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:39.886Z,1509695859.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:39.901Z,1509695859.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:40.288Z,1509695860.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:40.304Z,1509695860.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:40.701Z,1509695860.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:40.727Z,1509695860.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:41.105Z,1509695861.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:41.206Z,1509695861.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:41.501Z,1509695861.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:41.537Z,1509695861.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:41.892Z,1509695861.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:41.946Z,1509695861.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:42.288Z,1509695862.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:42.302Z,1509695862.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:42.688Z,1509695862.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:42.746Z,1509695862.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:43.093Z,1509695863.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:43.108Z,1509695863.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:43.487Z,1509695863.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:43.537Z,1509695863.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:43.910Z,1509695863.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:43.934Z,1509695863.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:44.306Z,1509695864.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:44.337Z,1509695864.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:44.709Z,1509695864.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:44.735Z,1509695864.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:45.088Z,1509695865.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:45.111Z,1509695865.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:45.492Z,1509695865.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:45.514Z,1509695865.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:45.888Z,1509695865.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:45.903Z,1509695865.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:46.288Z,1509695866.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:46.303Z,1509695866.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:46.709Z,1509695866.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:46.734Z,1509695866.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:47.105Z,1509695867.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:47.119Z,1509695867.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:47.510Z,1509695867.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:47.537Z,1509695867.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:47.892Z,1509695867.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:47.911Z,1509695867.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:48.292Z,1509695868.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:48.306Z,1509695868.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:48.690Z,1509695868.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:48.706Z,1509695868.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:49.093Z,1509695869.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:49.107Z,1509695869.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:49.491Z,1509695869.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:49.506Z,1509695869.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:49.897Z,1509695869.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:49.913Z,1509695869.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:50.305Z,1509695870.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:50.336Z,1509695870.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:50.697Z,1509695870.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:50.712Z,1509695870.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:51.092Z,1509695871.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:51.107Z,1509695871.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:51.492Z,1509695871.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:51.507Z,1509695871.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:51.892Z,1509695871.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:51.907Z,1509695871.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:52.291Z,1509695872.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:52.311Z,1509695872.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:52.706Z,1509695872.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:52.737Z,1509695872.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:53.104Z,1509695873.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:53.119Z,1509695873.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:53.505Z,1509695873.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:53.537Z,1509695873.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:53.893Z,1509695873.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:53.908Z,1509695873.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:54.292Z,1509695874.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:54.306Z,1509695874.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:54.709Z,1509695874.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:54.739Z,1509695874.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:55.105Z,1509695875.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:55.137Z,1509695875.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:55.505Z,1509695875.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:55.580Z,1509695875.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:55.894Z,1509695875.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:55.909Z,1509695875.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:56.294Z,1509695876.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:56.343Z,1509695876.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:56.693Z,1509695876.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:56.707Z,1509695876.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:57.097Z,1509695877.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:57.147Z,1509695877.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:57.494Z,1509695877.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:57.513Z,1509695877.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:57.909Z,1509695877.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:57.955Z,1509695877.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:58.309Z,1509695878.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:58.340Z,1509695878.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:58.701Z,1509695878.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:58.716Z,1509695878.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:59.095Z,1509695879.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:59.109Z,1509695879.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:59.495Z,1509695879.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:59.510Z,1509695879.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:57:59.894Z,1509695879.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:57:59.915Z,1509695879.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:00.292Z,1509695880.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:00.307Z,1509695880.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:00.701Z,1509695880.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:00.717Z,1509695880.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:01.101Z,1509695881.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:01.116Z,1509695881.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:01.497Z,1509695881.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:01.512Z,1509695881.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:01.897Z,1509695881.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:01.912Z,1509695881.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:02.294Z,1509695882.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:02.313Z,1509695882.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:02.697Z,1509695882.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:02.712Z,1509695882.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:03.101Z,1509695883.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:03.116Z,1509695883.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:03.501Z,1509695883.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:03.516Z,1509695883.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:03.896Z,1509695883.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:03.911Z,1509695883.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:04.296Z,1509695884.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:04.311Z,1509695884.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:04.695Z,1509695884.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:04.733Z,1509695884.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:05.100Z,1509695885.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:05.115Z,1509695885.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:05.498Z,1509695885.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:05.513Z,1509695885.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:05.902Z,1509695885.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:05.917Z,1509695885.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:06.300Z,1509695886.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:06.316Z,1509695886.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:06.702Z,1509695886.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:06.723Z,1509695886.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:07.098Z,1509695887.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:07.114Z,1509695887.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:07.493Z,1509695887.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:07.507Z,1509695887.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:07.899Z,1509695887.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:07.914Z,1509695887.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:08.296Z,1509695888.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:08.311Z,1509695888.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:08.700Z,1509695888.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:08.715Z,1509695888.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:09.106Z,1509695889.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:09.121Z,1509695889.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:09.502Z,1509695889.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:09.523Z,1509695889.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:09.899Z,1509695889.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:09.991Z,1509695889.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:10.296Z,1509695890.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:10.318Z,1509695890.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:10.702Z,1509695890.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:10.717Z,1509695890.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:11.100Z,1509695891.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:11.144Z,1509695891.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:11.502Z,1509695891.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:11.517Z,1509695891.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:11.896Z,1509695891.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:11.951Z,1509695891.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:12.294Z,1509695892.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:12.344Z,1509695892.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:12.697Z,1509695892.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:12.712Z,1509695892.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:13.097Z,1509695893.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:13.112Z,1509695893.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:13.499Z,1509695893.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:13.514Z,1509695893.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:13.902Z,1509695893.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:13.917Z,1509695893.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:14.302Z,1509695894.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:14.317Z,1509695894.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:14.702Z,1509695894.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:14.716Z,1509695894.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:15.097Z,1509695895.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:15.112Z,1509695895.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:15.494Z,1509695895.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:15.509Z,1509695895.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:15.889Z,1509695895.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:15.923Z,1509695895.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:16.292Z,1509695896.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:16.318Z,1509695896.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:16.710Z,1509695896.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:16.725Z,1509695896.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:17.115Z,1509695897.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:17.130Z,1509695897.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:17.511Z,1509695897.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:17.527Z,1509695897.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:17.889Z,1509695897.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:17.917Z,1509695897.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:18.285Z,1509695898.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:18.322Z,1509695898.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:18.710Z,1509695898.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:18.725Z,1509695898.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:19.110Z,1509695899.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:19.125Z,1509695899.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:19.510Z,1509695899.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:19.530Z,1509695899.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:19.892Z,1509695899.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:19.918Z,1509695899.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:20.289Z,1509695900.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:20.319Z,1509695900.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:20.684Z,1509695900.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:20.719Z,1509695900.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:21.091Z,1509695901.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:21.123Z,1509695901.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:21.491Z,1509695901.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:21.517Z,1509695901.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:21.910Z,1509695901.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:21.930Z,1509695901.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:22.314Z,1509695902.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:22.329Z,1509695902.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:22.710Z,1509695902.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:22.725Z,1509695902.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:23.084Z,1509695903.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:23.116Z,1509695903.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:23.491Z,1509695903.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:23.522Z,1509695903.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:23.889Z,1509695903.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:23.925Z,1509695903.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:24.289Z,1509695904.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:24.377Z,1509695904.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:24.702Z,1509695904.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:24.725Z,1509695904.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:25.102Z,1509695905.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:25.125Z,1509695905.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:25.501Z,1509695905.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:25.555Z,1509695905.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:25.892Z,1509695905.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:25.907Z,1509695905.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:26.295Z,1509695906.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:26.347Z,1509695906.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:26.705Z,1509695906.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:26.756Z,1509695906.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:27.102Z,1509695907.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:27.125Z,1509695907.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:27.502Z,1509695907.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:27.525Z,1509695907.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:27.887Z,1509695907.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:27.902Z,1509695907.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:28.288Z,1509695908.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:28.303Z,1509695908.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:28.688Z,1509695908.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:28.703Z,1509695908.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:29.096Z,1509695909.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:29.130Z,1509695909.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:29.487Z,1509695909.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:29.503Z,1509695909.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:29.902Z,1509695909.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:29.925Z,1509695909.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:30.301Z,1509695910.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:30.326Z,1509695910.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:30.702Z,1509695910.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:30.725Z,1509695910.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:31.087Z,1509695911.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:31.130Z,1509695911.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:31.491Z,1509695911.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:31.505Z,1509695911.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:31.888Z,1509695911.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:31.903Z,1509695911.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:32.295Z,1509695912.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:32.327Z,1509695912.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:32.701Z,1509695912.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:32.726Z,1509695912.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:35.803Z,1509695915.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:35.826Z,1509695915.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:35.978Z,1509695915.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:36.021Z,1509695916.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:36.354Z,1509695916.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:36.389Z,1509695916.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:36.755Z,1509695916.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:36.781Z,1509695916.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:37.156Z,1509695917.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:37.181Z,1509695917.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:37.549Z,1509695917.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:37.572Z,1509695917.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:37.976Z,1509695917.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:37.991Z,1509695917.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:38.377Z,1509695918.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:38.393Z,1509695918.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:38.776Z,1509695918.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:38.849Z,1509695918.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:39.152Z,1509695919.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:39.195Z,1509695919.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:39.552Z,1509695919.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:39.606Z,1509695919.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:39.952Z,1509695919.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:39.966Z,1509695919.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:40.351Z,1509695920.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:40.406Z,1509695920.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:40.769Z,1509695920.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:40.840Z,1509695920.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:41.165Z,1509695921.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:41.197Z,1509695921.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:41.565Z,1509695921.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:41.597Z,1509695921.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:41.951Z,1509695921.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:41.971Z,1509695921.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:42.351Z,1509695922.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:42.366Z,1509695922.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:42.752Z,1509695922.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:42.767Z,1509695922.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:43.152Z,1509695923.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:43.167Z,1509695923.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:43.551Z,1509695923.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:43.566Z,1509695923.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:43.965Z,1509695923.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:43.997Z,1509695923.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:44.365Z,1509695924.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:44.397Z,1509695924.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:44.765Z,1509695924.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:44.797Z,1509695924.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:45.152Z,1509695925.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:45.167Z,1509695925.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:45.559Z,1509695925.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:45.598Z,1509695925.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:45.952Z,1509695925.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:45.967Z,1509695925.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:46.351Z,1509695926.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:46.371Z,1509695926.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:46.765Z,1509695926.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:46.797Z,1509695926.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:47.165Z,1509695927.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:47.198Z,1509695927.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:47.565Z,1509695927.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:47.597Z,1509695927.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:47.955Z,1509695927.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:47.975Z,1509695927.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:48.359Z,1509695928.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:48.373Z,1509695928.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:48.759Z,1509695928.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:48.798Z,1509695928.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:49.150Z,1509695929.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:49.167Z,1509695929.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:49.556Z,1509695929.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:49.570Z,1509695929.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:49.965Z,1509695929.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:49.997Z,1509695929.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:50.365Z,1509695930.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:50.397Z,1509695930.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:50.769Z,1509695930.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:50.802Z,1509695930.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:51.151Z,1509695931.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:51.171Z,1509695931.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:51.551Z,1509695931.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:51.575Z,1509695931.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:51.953Z,1509695931.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:51.962Z,1509695931.962 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T07:58:51.962Z,1509695931.962 [BPC1] Data Fault, FailCount= 1
2017-11-03T07:58:51.962Z,1509695931.962 [BPC1](ERROR): Data Fault
2017-11-03T07:58:51.970Z,1509695931.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:52.097Z,1509695932.097 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T07:58:52.352Z,1509695932.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:52.368Z,1509695932.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:52.765Z,1509695932.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:52.797Z,1509695932.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:53.165Z,1509695933.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:53.197Z,1509695933.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:53.284Z,1509695933.284 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T07:58:53.284Z,1509695933.284 [BPC1] No Fault, FailCount= 1
2017-11-03T07:58:53.565Z,1509695933.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:53.647Z,1509695933.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:53.952Z,1509695933.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:53.967Z,1509695933.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:54.351Z,1509695934.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:54.397Z,1509695934.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:54.752Z,1509695934.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:54.767Z,1509695934.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:55.153Z,1509695935.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:55.168Z,1509695935.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:55.552Z,1509695935.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:55.567Z,1509695935.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:55.965Z,1509695935.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:55.997Z,1509695935.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:56.369Z,1509695936.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:56.401Z,1509695936.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:56.769Z,1509695936.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:56.801Z,1509695936.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:57.153Z,1509695937.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:57.168Z,1509695937.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:57.556Z,1509695937.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:57.571Z,1509695937.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:57.960Z,1509695937.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:57.974Z,1509695937.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:58.353Z,1509695938.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:58.375Z,1509695938.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:58.770Z,1509695938.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:58.800Z,1509695938.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:59.173Z,1509695939.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:59.198Z,1509695939.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:59.569Z,1509695939.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:59.601Z,1509695939.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:58:59.956Z,1509695939.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:58:59.971Z,1509695939.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:00.359Z,1509695940.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:00.373Z,1509695940.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:00.753Z,1509695940.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:00.768Z,1509695940.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:01.158Z,1509695941.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:01.173Z,1509695941.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:01.559Z,1509695941.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:01.574Z,1509695941.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:01.973Z,1509695941.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:01.999Z,1509695941.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:02.369Z,1509695942.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:02.400Z,1509695942.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:02.766Z,1509695942.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:02.781Z,1509695942.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:03.161Z,1509695943.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:03.177Z,1509695943.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:03.558Z,1509695943.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:03.587Z,1509695943.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:03.964Z,1509695943.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:03.986Z,1509695943.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:04.362Z,1509695944.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:04.378Z,1509695944.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:04.766Z,1509695944.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:04.781Z,1509695944.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:05.169Z,1509695945.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:05.191Z,1509695945.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:05.566Z,1509695945.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:05.582Z,1509695945.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:05.961Z,1509695945.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:06.018Z,1509695946.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:06.359Z,1509695946.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:06.373Z,1509695946.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:06.763Z,1509695946.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:06.835Z,1509695946.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:07.154Z,1509695947.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:07.181Z,1509695947.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:07.553Z,1509695947.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:07.579Z,1509695947.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:07.974Z,1509695947.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:08.027Z,1509695948.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:08.374Z,1509695948.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:08.389Z,1509695948.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:08.778Z,1509695948.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:08.953Z,1509695948.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:09.148Z,1509695949.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:09.179Z,1509695949.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:09.552Z,1509695949.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:09.617Z,1509695949.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:09.953Z,1509695949.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:09.979Z,1509695949.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:10.355Z,1509695950.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:10.380Z,1509695950.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:10.773Z,1509695950.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:10.788Z,1509695950.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:11.177Z,1509695951.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:11.192Z,1509695951.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:11.567Z,1509695951.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:11.583Z,1509695951.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:11.952Z,1509695951.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:11.978Z,1509695951.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:12.352Z,1509695952.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:12.378Z,1509695952.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:12.755Z,1509695952.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:12.780Z,1509695952.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:13.153Z,1509695953.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:13.182Z,1509695953.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:13.555Z,1509695953.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:13.580Z,1509695953.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:13.973Z,1509695953.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:13.988Z,1509695953.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:14.373Z,1509695954.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:14.388Z,1509695954.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:14.773Z,1509695954.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:14.800Z,1509695954.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:15.155Z,1509695955.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:15.180Z,1509695955.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:15.552Z,1509695955.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:15.578Z,1509695955.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:15.956Z,1509695955.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:15.980Z,1509695955.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:16.348Z,1509695956.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:16.378Z,1509695956.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:16.773Z,1509695956.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:16.795Z,1509695956.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:17.173Z,1509695957.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:17.188Z,1509695957.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:17.574Z,1509695957.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:17.589Z,1509695957.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:17.955Z,1509695957.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:17.981Z,1509695957.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:18.349Z,1509695958.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:18.384Z,1509695958.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:18.755Z,1509695958.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:18.780Z,1509695958.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:19.153Z,1509695959.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:19.179Z,1509695959.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:19.552Z,1509695959.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:19.578Z,1509695959.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:19.968Z,1509695959.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:19.983Z,1509695959.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:20.373Z,1509695960.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:20.388Z,1509695960.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:20.777Z,1509695960.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:20.792Z,1509695960.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:21.155Z,1509695961.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:21.181Z,1509695961.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:21.555Z,1509695961.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:21.648Z,1509695961.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:21.952Z,1509695961.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:21.986Z,1509695961.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:22.348Z,1509695962.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:22.407Z,1509695962.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:22.773Z,1509695962.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:22.788Z,1509695962.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:23.177Z,1509695963.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:23.231Z,1509695963.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:23.574Z,1509695963.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:23.630Z,1509695963.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:23.952Z,1509695963.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:23.983Z,1509695963.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:24.355Z,1509695964.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:24.390Z,1509695964.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:24.748Z,1509695964.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:24.764Z,1509695964.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:25.156Z,1509695965.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:25.183Z,1509695965.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:25.591Z,1509695965.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:25.617Z,1509695965.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:25.965Z,1509695965.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:25.991Z,1509695965.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:26.369Z,1509695966.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:26.403Z,1509695966.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:26.769Z,1509695966.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:26.834Z,1509695966.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:27.146Z,1509695967.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:27.166Z,1509695967.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:27.553Z,1509695967.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:27.568Z,1509695967.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:27.957Z,1509695967.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:27.972Z,1509695967.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:28.353Z,1509695968.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:28.367Z,1509695968.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:28.766Z,1509695968.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:28.796Z,1509695968.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:29.166Z,1509695969.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:29.197Z,1509695969.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:29.566Z,1509695969.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:29.597Z,1509695969.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:29.952Z,1509695969.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:29.967Z,1509695969.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:30.352Z,1509695970.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:30.371Z,1509695970.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:30.752Z,1509695970.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:30.767Z,1509695970.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:31.153Z,1509695971.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:31.169Z,1509695971.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:31.559Z,1509695971.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:31.574Z,1509695971.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:31.965Z,1509695971.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:31.998Z,1509695971.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:32.001Z,1509695972.001 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T07:59:32.002Z,1509695972.002 [Default:CheckIn:C.Wait] Stopped
2017-11-03T07:59:32.002Z,1509695972.002 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T07:59:32.002Z,1509695972.002 [Default:CheckIn:D] Running Loop=1
2017-11-03T07:59:32.369Z,1509695972.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:32.395Z,1509695972.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:32.398Z,1509695972.398 [Default:CheckIn:D] Stopped
2017-11-03T07:59:32.398Z,1509695972.398 [Default:CheckIn:E] Running Loop=1
2017-11-03T07:59:32.770Z,1509695972.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:32.805Z,1509695972.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:32.811Z,1509695972.811 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 464.413867 min 
2017-11-03T07:59:32.811Z,1509695972.811 [Default:CheckIn:E] Stopped
2017-11-03T07:59:32.812Z,1509695972.812 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T07:59:32.812Z,1509695972.812 [Default:CheckIn] Stopped
2017-11-03T07:59:32.812Z,1509695972.812 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T07:59:32.812Z,1509695972.812 [Default:CheckIn](INFO): Running loop #46
2017-11-03T07:59:32.813Z,1509695972.813 [Default:CheckIn] Running Loop=46
2017-11-03T07:59:32.813Z,1509695972.813 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T07:59:32.813Z,1509695972.813 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T07:59:35.861Z,1509695975.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:35.927Z,1509695975.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:36.070Z,1509695976.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:36.103Z,1509695976.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:36.481Z,1509695976.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:36.547Z,1509695976.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:36.877Z,1509695976.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:36.905Z,1509695976.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:37.277Z,1509695977.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:37.345Z,1509695977.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:37.666Z,1509695977.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:37.714Z,1509695977.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:38.067Z,1509695978.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:38.082Z,1509695978.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:38.465Z,1509695978.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:38.503Z,1509695978.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:38.878Z,1509695978.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:38.909Z,1509695978.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:38.909Z,1509695978.909 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 155
2017-11-03T07:59:38.909Z,1509695978.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T07:59:38.911Z,1509695978.911 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:38.911Z,1509695978.911 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 155
2017-11-03T07:59:38.911Z,1509695978.911 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T07:59:38.913Z,1509695978.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:38.913Z,1509695978.913 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 155
2017-11-03T07:59:38.913Z,1509695978.913 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T07:59:39.000Z,1509695979.000 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T07:59:39.001Z,1509695979.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T07:59:39.001Z,1509695979.001 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T07:59:39.296Z,1509695979.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:39.397Z,1509695979.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T07:59:39.397Z,1509695979.397 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 155
2017-11-03T07:59:39.397Z,1509695979.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T07:59:39.397Z,1509695979.397 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 155
2017-11-03T07:59:39.398Z,1509695979.398 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T07:59:39.398Z,1509695979.398 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 155
2017-11-03T07:59:39.682Z,1509695979.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:39.706Z,1509695979.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T07:59:39.706Z,1509695979.706 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:59:39.706Z,1509695979.706 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:59:39.707Z,1509695979.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T07:59:39.707Z,1509695979.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:59:39.708Z,1509695979.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:59:39.708Z,1509695979.708 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T07:59:39.709Z,1509695979.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T07:59:39.709Z,1509695979.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T07:59:40.066Z,1509695980.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:40.098Z,1509695980.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T07:59:40.099Z,1509695980.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:40.474Z,1509695980.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:40.494Z,1509695980.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T07:59:40.495Z,1509695980.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:40.874Z,1509695980.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:40.894Z,1509695980.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T07:59:40.895Z,1509695980.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:41.277Z,1509695981.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:41.292Z,1509695981.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T07:59:41.293Z,1509695981.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:41.672Z,1509695981.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:41.686Z,1509695981.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T07:59:41.687Z,1509695981.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:42.080Z,1509695982.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:42.099Z,1509695982.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T07:59:42.100Z,1509695982.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:42.480Z,1509695982.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:42.495Z,1509695982.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T07:59:42.497Z,1509695982.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:42.880Z,1509695982.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:42.898Z,1509695982.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T07:59:42.899Z,1509695982.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:43.272Z,1509695983.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:43.286Z,1509695983.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T07:59:43.287Z,1509695983.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:43.676Z,1509695983.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:43.691Z,1509695983.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T07:59:43.691Z,1509695983.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:44.075Z,1509695984.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:44.090Z,1509695984.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T07:59:44.091Z,1509695984.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:44.473Z,1509695984.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:44.488Z,1509695984.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T07:59:44.489Z,1509695984.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:44.881Z,1509695984.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:44.896Z,1509695984.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T07:59:44.897Z,1509695984.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:45.280Z,1509695985.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:45.295Z,1509695985.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T07:59:45.296Z,1509695985.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:45.680Z,1509695985.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:45.694Z,1509695985.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T07:59:45.695Z,1509695985.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:46.074Z,1509695986.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:46.094Z,1509695986.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T07:59:46.095Z,1509695986.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:46.475Z,1509695986.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:46.494Z,1509695986.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T07:59:46.495Z,1509695986.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:46.872Z,1509695986.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:46.887Z,1509695986.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T07:59:46.888Z,1509695986.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:47.277Z,1509695987.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:47.291Z,1509695987.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T07:59:47.293Z,1509695987.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:47.675Z,1509695987.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:47.694Z,1509695987.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T07:59:47.695Z,1509695987.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:48.081Z,1509695988.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:48.098Z,1509695988.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T07:59:48.099Z,1509695988.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:48.481Z,1509695988.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:48.496Z,1509695988.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T07:59:48.497Z,1509695988.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:48.880Z,1509695988.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:48.895Z,1509695988.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T07:59:48.897Z,1509695988.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:49.274Z,1509695989.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:49.289Z,1509695989.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T07:59:49.290Z,1509695989.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:49.676Z,1509695989.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:49.734Z,1509695989.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T07:59:49.735Z,1509695989.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:50.073Z,1509695990.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:50.107Z,1509695990.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T07:59:50.108Z,1509695990.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:50.473Z,1509695990.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:50.494Z,1509695990.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T07:59:50.495Z,1509695990.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:50.885Z,1509695990.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:50.934Z,1509695990.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T07:59:50.935Z,1509695990.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:51.281Z,1509695991.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:51.296Z,1509695991.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T07:59:51.297Z,1509695991.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:51.685Z,1509695991.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:51.734Z,1509695991.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T07:59:51.735Z,1509695991.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:52.078Z,1509695992.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:52.137Z,1509695992.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T07:59:52.138Z,1509695992.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:52.475Z,1509695992.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:52.494Z,1509695992.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T07:59:52.495Z,1509695992.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:52.872Z,1509695992.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:52.892Z,1509695992.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T07:59:52.893Z,1509695992.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:53.278Z,1509695993.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:53.293Z,1509695993.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T07:59:53.294Z,1509695993.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:53.673Z,1509695993.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:53.687Z,1509695993.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T07:59:53.689Z,1509695993.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:54.085Z,1509695994.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:54.106Z,1509695994.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T07:59:54.107Z,1509695994.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:54.485Z,1509695994.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:54.500Z,1509695994.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T07:59:54.501Z,1509695994.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:54.885Z,1509695994.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:54.900Z,1509695994.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T07:59:54.901Z,1509695994.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:55.273Z,1509695995.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:55.287Z,1509695995.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T07:59:55.289Z,1509695995.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:55.676Z,1509695995.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:55.690Z,1509695995.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T07:59:55.691Z,1509695995.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:56.076Z,1509695996.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:56.099Z,1509695996.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T07:59:56.100Z,1509695996.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:56.473Z,1509695996.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:56.487Z,1509695996.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T07:59:56.489Z,1509695996.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:56.885Z,1509695996.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:56.899Z,1509695996.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T07:59:56.900Z,1509695996.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:57.284Z,1509695997.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:57.299Z,1509695997.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T07:59:57.300Z,1509695997.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:57.684Z,1509695997.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:57.699Z,1509695997.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T07:59:57.700Z,1509695997.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:58.075Z,1509695998.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:58.090Z,1509695998.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T07:59:58.091Z,1509695998.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:58.474Z,1509695998.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:58.495Z,1509695998.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T07:59:58.496Z,1509695998.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:58.873Z,1509695998.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:58.888Z,1509695998.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T07:59:58.889Z,1509695998.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:59.276Z,1509695999.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:59.291Z,1509695999.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T07:59:59.675Z,1509695999.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T07:59:59.695Z,1509695999.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:00.084Z,1509696000.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:00.099Z,1509696000.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:00.484Z,1509696000.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:00.506Z,1509696000.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:00.884Z,1509696000.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:00.899Z,1509696000.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:01.274Z,1509696001.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:01.295Z,1509696001.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:01.676Z,1509696001.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:01.690Z,1509696001.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:02.075Z,1509696002.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:02.090Z,1509696002.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:02.472Z,1509696002.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:02.495Z,1509696002.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:02.884Z,1509696002.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:02.899Z,1509696002.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:03.284Z,1509696003.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:03.299Z,1509696003.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:03.684Z,1509696003.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:03.754Z,1509696003.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:04.064Z,1509696004.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:04.107Z,1509696004.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:04.467Z,1509696004.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:04.493Z,1509696004.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:04.864Z,1509696004.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:04.929Z,1509696004.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:05.266Z,1509696005.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:05.292Z,1509696005.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:05.667Z,1509696005.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:05.729Z,1509696005.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:06.085Z,1509696006.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:06.139Z,1509696006.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:06.481Z,1509696006.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:06.499Z,1509696006.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:06.885Z,1509696006.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:06.900Z,1509696006.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:07.267Z,1509696007.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:07.292Z,1509696007.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:07.667Z,1509696007.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:07.693Z,1509696007.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:08.068Z,1509696008.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:08.093Z,1509696008.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:08.465Z,1509696008.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:08.499Z,1509696008.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:08.895Z,1509696008.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:08.910Z,1509696008.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:09.289Z,1509696009.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:09.311Z,1509696009.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:09.685Z,1509696009.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:09.700Z,1509696009.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:10.063Z,1509696010.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:10.094Z,1509696010.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:10.464Z,1509696010.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:10.490Z,1509696010.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:10.864Z,1509696010.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:10.890Z,1509696010.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:11.267Z,1509696011.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:11.293Z,1509696011.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:11.666Z,1509696011.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:11.691Z,1509696011.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:12.085Z,1509696012.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:12.101Z,1509696012.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:12.489Z,1509696012.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:12.504Z,1509696012.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:12.885Z,1509696012.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:12.900Z,1509696012.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:13.265Z,1509696013.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:13.291Z,1509696013.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:13.667Z,1509696013.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:13.694Z,1509696013.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:14.065Z,1509696014.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:14.091Z,1509696014.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:14.464Z,1509696014.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:14.490Z,1509696014.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:14.885Z,1509696014.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:14.900Z,1509696014.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:15.281Z,1509696015.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:15.296Z,1509696015.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:15.686Z,1509696015.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:15.701Z,1509696015.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:16.068Z,1509696016.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:16.098Z,1509696016.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:16.466Z,1509696016.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:16.493Z,1509696016.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:16.865Z,1509696016.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:16.899Z,1509696016.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:17.278Z,1509696017.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:17.298Z,1509696017.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:17.665Z,1509696017.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:17.743Z,1509696017.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:18.086Z,1509696018.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:18.146Z,1509696018.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:18.490Z,1509696018.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:18.505Z,1509696018.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:18.885Z,1509696018.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:18.946Z,1509696018.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:19.264Z,1509696019.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:19.295Z,1509696019.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:19.662Z,1509696019.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:19.710Z,1509696019.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:20.065Z,1509696020.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:20.123Z,1509696020.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:20.464Z,1509696020.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:20.494Z,1509696020.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:20.888Z,1509696020.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:20.911Z,1509696020.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:21.285Z,1509696021.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:21.300Z,1509696021.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:21.685Z,1509696021.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:21.700Z,1509696021.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:22.067Z,1509696022.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:22.093Z,1509696022.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:22.464Z,1509696022.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:22.494Z,1509696022.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:22.865Z,1509696022.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:22.892Z,1509696022.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:23.267Z,1509696023.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:23.293Z,1509696023.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:23.665Z,1509696023.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:23.693Z,1509696023.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:24.085Z,1509696024.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:24.100Z,1509696024.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:24.485Z,1509696024.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:24.506Z,1509696024.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:24.885Z,1509696024.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:24.900Z,1509696024.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:25.264Z,1509696025.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:25.295Z,1509696025.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:25.660Z,1509696025.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:25.695Z,1509696025.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:26.066Z,1509696026.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:26.091Z,1509696026.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:26.464Z,1509696026.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:26.494Z,1509696026.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:26.889Z,1509696026.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:26.904Z,1509696026.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:27.285Z,1509696027.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:27.300Z,1509696027.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:27.685Z,1509696027.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:27.701Z,1509696027.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:28.064Z,1509696028.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:28.101Z,1509696028.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:28.467Z,1509696028.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:28.498Z,1509696028.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:28.866Z,1509696028.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:28.901Z,1509696028.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:29.264Z,1509696029.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:29.279Z,1509696029.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:29.665Z,1509696029.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:29.703Z,1509696029.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:30.077Z,1509696030.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:30.113Z,1509696030.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:30.481Z,1509696030.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:30.515Z,1509696030.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:30.886Z,1509696030.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:30.910Z,1509696030.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:31.269Z,1509696031.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:31.284Z,1509696031.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:31.667Z,1509696031.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:31.683Z,1509696031.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:32.065Z,1509696032.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:32.139Z,1509696032.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:32.474Z,1509696032.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:32.490Z,1509696032.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:32.881Z,1509696032.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:32.897Z,1509696032.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:36.026Z,1509696036.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:36.086Z,1509696036.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:36.237Z,1509696036.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:36.252Z,1509696036.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:36.622Z,1509696036.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:36.659Z,1509696036.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:37.024Z,1509696037.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:37.081Z,1509696037.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:37.422Z,1509696037.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:37.443Z,1509696037.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:37.830Z,1509696037.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:37.850Z,1509696037.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:38.236Z,1509696038.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:38.255Z,1509696038.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:38.633Z,1509696038.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:38.647Z,1509696038.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:39.009Z,1509696039.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:39.034Z,1509696039.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:39.422Z,1509696039.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:39.442Z,1509696039.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:39.836Z,1509696039.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:39.859Z,1509696039.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:40.215Z,1509696040.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:40.240Z,1509696040.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:40.615Z,1509696040.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:40.647Z,1509696040.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:41.033Z,1509696041.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:41.048Z,1509696041.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:41.430Z,1509696041.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:41.445Z,1509696041.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:41.833Z,1509696041.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:41.849Z,1509696041.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:42.212Z,1509696042.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:42.238Z,1509696042.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:42.609Z,1509696042.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:42.637Z,1509696042.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:43.012Z,1509696043.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:43.038Z,1509696043.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:43.413Z,1509696043.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:43.444Z,1509696043.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:43.838Z,1509696043.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:43.853Z,1509696043.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:44.238Z,1509696044.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:44.253Z,1509696044.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:44.634Z,1509696044.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:44.649Z,1509696044.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:45.014Z,1509696045.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:45.041Z,1509696045.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:45.415Z,1509696045.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:45.447Z,1509696045.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:45.813Z,1509696045.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:45.842Z,1509696045.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:46.216Z,1509696046.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:46.244Z,1509696046.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:46.615Z,1509696046.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:46.642Z,1509696046.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:47.034Z,1509696047.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:47.055Z,1509696047.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:47.438Z,1509696047.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:47.453Z,1509696047.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:47.838Z,1509696047.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:47.859Z,1509696047.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:48.211Z,1509696048.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:48.243Z,1509696048.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:48.613Z,1509696048.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:48.643Z,1509696048.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:49.016Z,1509696049.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:49.042Z,1509696049.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:49.412Z,1509696049.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:49.502Z,1509696049.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:49.834Z,1509696049.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:49.854Z,1509696049.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:50.236Z,1509696050.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:50.291Z,1509696050.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:50.633Z,1509696050.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:50.648Z,1509696050.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:51.012Z,1509696051.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:51.059Z,1509696051.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:51.409Z,1509696051.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:51.470Z,1509696051.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:51.812Z,1509696051.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:51.843Z,1509696051.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:52.209Z,1509696052.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:52.224Z,1509696052.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:52.613Z,1509696052.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:52.627Z,1509696052.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:53.025Z,1509696053.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:53.052Z,1509696053.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:53.425Z,1509696053.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:53.453Z,1509696053.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:53.825Z,1509696053.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:53.852Z,1509696053.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:54.212Z,1509696054.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:54.227Z,1509696054.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:54.612Z,1509696054.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:54.627Z,1509696054.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:55.014Z,1509696055.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:55.029Z,1509696055.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:55.412Z,1509696055.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:55.427Z,1509696055.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:55.829Z,1509696055.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:55.854Z,1509696055.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:56.225Z,1509696056.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:56.252Z,1509696056.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:56.625Z,1509696056.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:56.652Z,1509696056.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:57.012Z,1509696057.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:57.027Z,1509696057.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:57.409Z,1509696057.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:57.424Z,1509696057.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:57.813Z,1509696057.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:57.828Z,1509696057.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:58.213Z,1509696058.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:58.228Z,1509696058.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:58.613Z,1509696058.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:58.628Z,1509696058.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:59.025Z,1509696059.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:59.051Z,1509696059.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:59.425Z,1509696059.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:59.452Z,1509696059.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:00:59.823Z,1509696059.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:00:59.863Z,1509696059.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:00.215Z,1509696060.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:00.270Z,1509696060.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:00.614Z,1509696060.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:00.629Z,1509696060.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:01.030Z,1509696061.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:01.063Z,1509696061.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:01.413Z,1509696061.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:01.461Z,1509696061.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:01.839Z,1509696061.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:01.907Z,1509696061.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:02.236Z,1509696062.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:02.266Z,1509696062.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:02.635Z,1509696062.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:02.674Z,1509696062.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:03.054Z,1509696063.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:03.150Z,1509696063.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:03.416Z,1509696063.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:03.487Z,1509696063.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:03.819Z,1509696063.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:03.834Z,1509696063.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:04.266Z,1509696064.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:04.319Z,1509696064.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:04.622Z,1509696064.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:04.650Z,1509696064.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:05.026Z,1509696065.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:05.081Z,1509696065.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:05.427Z,1509696065.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:05.486Z,1509696065.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:05.834Z,1509696065.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:05.882Z,1509696065.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:06.255Z,1509696066.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:06.299Z,1509696066.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:06.622Z,1509696066.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:06.650Z,1509696066.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:07.021Z,1509696067.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:07.054Z,1509696067.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:07.419Z,1509696067.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:07.455Z,1509696067.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:07.832Z,1509696067.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:07.879Z,1509696067.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:08.235Z,1509696068.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:08.263Z,1509696068.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:08.632Z,1509696068.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:08.651Z,1509696068.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:09.013Z,1509696069.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:09.055Z,1509696069.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:09.417Z,1509696069.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:09.455Z,1509696069.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:09.814Z,1509696069.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:09.855Z,1509696069.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:10.214Z,1509696070.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:10.282Z,1509696070.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:10.613Z,1509696070.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:10.653Z,1509696070.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:11.032Z,1509696071.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:11.047Z,1509696071.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:11.437Z,1509696071.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:11.451Z,1509696071.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:11.833Z,1509696071.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:11.861Z,1509696071.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:12.213Z,1509696072.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:12.261Z,1509696072.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:12.620Z,1509696072.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:12.662Z,1509696072.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:13.021Z,1509696073.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:13.065Z,1509696073.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:13.419Z,1509696073.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:13.459Z,1509696073.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:13.827Z,1509696073.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:13.878Z,1509696073.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:14.235Z,1509696074.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:14.286Z,1509696074.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:14.637Z,1509696074.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:14.652Z,1509696074.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:15.015Z,1509696075.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:15.041Z,1509696075.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:15.412Z,1509696075.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:15.442Z,1509696075.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:15.830Z,1509696075.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:15.851Z,1509696075.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:16.212Z,1509696076.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:16.243Z,1509696076.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:16.609Z,1509696076.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:16.640Z,1509696076.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:17.033Z,1509696077.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:17.048Z,1509696077.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:17.421Z,1509696077.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:17.519Z,1509696077.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:17.826Z,1509696077.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:17.855Z,1509696077.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:18.213Z,1509696078.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:18.267Z,1509696078.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:18.615Z,1509696078.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:18.651Z,1509696078.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:19.013Z,1509696079.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:19.067Z,1509696079.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:19.418Z,1509696079.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:19.441Z,1509696079.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:19.826Z,1509696079.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:19.875Z,1509696079.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:20.221Z,1509696080.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:20.256Z,1509696080.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:20.626Z,1509696080.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:20.672Z,1509696080.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:21.012Z,1509696081.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:21.027Z,1509696081.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:21.413Z,1509696081.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:21.455Z,1509696081.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:21.813Z,1509696081.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:21.828Z,1509696081.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:22.213Z,1509696082.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:22.228Z,1509696082.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:22.620Z,1509696082.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:22.635Z,1509696082.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:23.026Z,1509696083.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:23.057Z,1509696083.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:23.425Z,1509696083.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:23.458Z,1509696083.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:23.826Z,1509696083.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:23.857Z,1509696083.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:24.219Z,1509696084.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:24.235Z,1509696084.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:24.612Z,1509696084.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:24.627Z,1509696084.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:25.035Z,1509696085.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:25.060Z,1509696085.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:25.412Z,1509696085.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:25.427Z,1509696085.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:25.826Z,1509696085.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:25.872Z,1509696085.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:26.226Z,1509696086.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:26.257Z,1509696086.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:26.626Z,1509696086.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:26.659Z,1509696086.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:27.012Z,1509696087.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:27.027Z,1509696087.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:27.419Z,1509696087.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:27.439Z,1509696087.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:27.819Z,1509696087.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:27.839Z,1509696087.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:28.216Z,1509696088.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:28.231Z,1509696088.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:28.612Z,1509696088.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:28.627Z,1509696088.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:29.030Z,1509696089.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:29.060Z,1509696089.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:29.424Z,1509696089.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:29.460Z,1509696089.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:29.830Z,1509696089.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:29.861Z,1509696089.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:30.216Z,1509696090.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:30.239Z,1509696090.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:30.611Z,1509696090.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:30.626Z,1509696090.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:31.013Z,1509696091.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:31.028Z,1509696091.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:31.419Z,1509696091.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:31.439Z,1509696091.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:31.833Z,1509696091.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:31.935Z,1509696091.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:32.222Z,1509696092.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:32.237Z,1509696092.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:32.634Z,1509696092.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:32.661Z,1509696092.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:33.020Z,1509696093.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:33.062Z,1509696093.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:36.107Z,1509696096.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:36.123Z,1509696096.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:36.260Z,1509696096.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:36.319Z,1509696096.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:36.668Z,1509696096.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:36.722Z,1509696096.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:37.068Z,1509696097.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:37.083Z,1509696097.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:37.468Z,1509696097.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:37.487Z,1509696097.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:37.857Z,1509696097.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:37.871Z,1509696097.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:38.257Z,1509696098.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:38.272Z,1509696098.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:38.656Z,1509696098.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:38.671Z,1509696098.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:39.068Z,1509696099.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:39.083Z,1509696099.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:39.468Z,1509696099.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:39.487Z,1509696099.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:39.867Z,1509696099.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:39.887Z,1509696099.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:40.259Z,1509696100.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:40.274Z,1509696100.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:40.656Z,1509696100.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:40.679Z,1509696100.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:41.057Z,1509696101.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:41.072Z,1509696101.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:41.459Z,1509696101.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:41.474Z,1509696101.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:41.868Z,1509696101.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:41.887Z,1509696101.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:42.267Z,1509696102.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:42.287Z,1509696102.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:42.668Z,1509696102.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:42.682Z,1509696102.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:43.056Z,1509696103.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:43.071Z,1509696103.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:43.456Z,1509696103.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:43.471Z,1509696103.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:43.857Z,1509696103.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:43.871Z,1509696103.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:44.257Z,1509696104.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:44.272Z,1509696104.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:44.656Z,1509696104.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:44.671Z,1509696104.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:45.069Z,1509696105.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:45.084Z,1509696105.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:45.468Z,1509696105.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:45.491Z,1509696105.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:45.868Z,1509696105.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:45.887Z,1509696105.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:46.257Z,1509696106.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:46.272Z,1509696106.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:46.656Z,1509696106.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:46.671Z,1509696106.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:47.057Z,1509696107.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:47.072Z,1509696107.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:47.461Z,1509696107.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:47.476Z,1509696107.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:47.868Z,1509696107.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:47.883Z,1509696107.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:48.268Z,1509696108.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:48.283Z,1509696108.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:48.669Z,1509696108.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:48.690Z,1509696108.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:49.056Z,1509696109.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:49.138Z,1509696109.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:49.451Z,1509696109.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:49.477Z,1509696109.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:49.848Z,1509696109.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:49.912Z,1509696109.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:50.250Z,1509696110.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:50.276Z,1509696110.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:50.649Z,1509696110.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:50.712Z,1509696110.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:51.070Z,1509696111.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:51.122Z,1509696111.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:51.470Z,1509696111.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:51.491Z,1509696111.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:51.871Z,1509696111.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:51.886Z,1509696111.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:52.251Z,1509696112.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:52.279Z,1509696112.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:52.648Z,1509696112.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:52.675Z,1509696112.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:53.049Z,1509696113.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:53.076Z,1509696113.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:53.451Z,1509696113.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:53.479Z,1509696113.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:53.870Z,1509696113.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:53.885Z,1509696113.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:54.269Z,1509696114.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:54.291Z,1509696114.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:54.670Z,1509696114.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:54.686Z,1509696114.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:55.048Z,1509696115.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:55.074Z,1509696115.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:55.448Z,1509696115.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:55.474Z,1509696115.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:55.561Z,1509696115.561 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T08:01:55.851Z,1509696115.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:55.878Z,1509696115.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:56.249Z,1509696116.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:56.282Z,1509696116.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:56.651Z,1509696116.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:56.676Z,1509696116.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:57.070Z,1509696117.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:57.085Z,1509696117.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:57.469Z,1509696117.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:57.484Z,1509696117.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:57.869Z,1509696117.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:57.884Z,1509696117.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:58.251Z,1509696118.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:58.278Z,1509696118.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:58.651Z,1509696118.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:58.677Z,1509696118.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:59.050Z,1509696119.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:59.075Z,1509696119.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:59.451Z,1509696119.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:59.478Z,1509696119.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:01:59.869Z,1509696119.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:01:59.885Z,1509696119.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:00.269Z,1509696120.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:00.284Z,1509696120.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:00.673Z,1509696120.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:00.688Z,1509696120.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:01.049Z,1509696121.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:01.079Z,1509696121.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:01.448Z,1509696121.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:01.475Z,1509696121.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:01.851Z,1509696121.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:01.878Z,1509696121.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:02.249Z,1509696122.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:02.276Z,1509696122.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:02.649Z,1509696122.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:02.676Z,1509696122.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:03.074Z,1509696123.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:03.162Z,1509696123.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:03.470Z,1509696123.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:03.485Z,1509696123.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:03.870Z,1509696123.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:03.930Z,1509696123.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:04.250Z,1509696124.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:04.277Z,1509696124.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:04.651Z,1509696124.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:04.722Z,1509696124.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:05.049Z,1509696125.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:05.118Z,1509696125.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:05.449Z,1509696125.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:05.480Z,1509696125.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:05.870Z,1509696125.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:05.891Z,1509696125.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:06.269Z,1509696126.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:06.285Z,1509696126.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:06.673Z,1509696126.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:06.689Z,1509696126.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:07.051Z,1509696127.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:07.078Z,1509696127.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:07.448Z,1509696127.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:07.483Z,1509696127.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:07.851Z,1509696127.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:07.877Z,1509696127.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:08.245Z,1509696128.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:08.281Z,1509696128.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:08.648Z,1509696128.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:08.683Z,1509696128.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:09.070Z,1509696129.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:09.085Z,1509696129.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:09.472Z,1509696129.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:09.487Z,1509696129.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:09.870Z,1509696129.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:09.885Z,1509696129.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:10.251Z,1509696130.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:10.282Z,1509696130.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:10.651Z,1509696130.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:10.681Z,1509696130.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:11.052Z,1509696131.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:11.081Z,1509696131.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:11.451Z,1509696131.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:11.481Z,1509696131.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:11.870Z,1509696131.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:11.885Z,1509696131.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:12.273Z,1509696132.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:12.288Z,1509696132.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:12.673Z,1509696132.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:12.688Z,1509696132.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:13.051Z,1509696133.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:13.081Z,1509696133.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:13.451Z,1509696133.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:13.481Z,1509696133.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:13.851Z,1509696133.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:13.882Z,1509696133.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:14.252Z,1509696134.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:14.281Z,1509696134.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:14.651Z,1509696134.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:14.681Z,1509696134.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:15.073Z,1509696135.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:15.094Z,1509696135.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:15.473Z,1509696135.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:15.488Z,1509696135.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:15.870Z,1509696135.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:15.885Z,1509696135.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:16.251Z,1509696136.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:16.282Z,1509696136.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:16.647Z,1509696136.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:16.683Z,1509696136.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:17.052Z,1509696137.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:17.111Z,1509696137.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:17.447Z,1509696137.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:17.503Z,1509696137.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:17.866Z,1509696137.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:17.889Z,1509696137.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:18.265Z,1509696138.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:18.323Z,1509696138.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:18.665Z,1509696138.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:18.691Z,1509696138.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:19.052Z,1509696139.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:19.107Z,1509696139.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:19.452Z,1509696139.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:19.506Z,1509696139.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:19.855Z,1509696139.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:19.870Z,1509696139.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:20.252Z,1509696140.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:20.267Z,1509696140.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:20.651Z,1509696140.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:20.667Z,1509696140.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:21.065Z,1509696141.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:21.098Z,1509696141.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:21.465Z,1509696141.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:21.490Z,1509696141.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:21.865Z,1509696141.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:21.890Z,1509696141.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:22.255Z,1509696142.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:22.269Z,1509696142.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:22.651Z,1509696142.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:22.667Z,1509696142.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:23.052Z,1509696143.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:23.091Z,1509696143.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:23.451Z,1509696143.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:23.466Z,1509696143.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:23.865Z,1509696143.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:23.890Z,1509696143.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:24.265Z,1509696144.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:24.290Z,1509696144.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:24.669Z,1509696144.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:24.693Z,1509696144.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:25.052Z,1509696145.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:25.067Z,1509696145.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:25.452Z,1509696145.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:25.467Z,1509696145.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:25.855Z,1509696145.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:25.869Z,1509696145.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:26.252Z,1509696146.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:26.267Z,1509696146.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:26.652Z,1509696146.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:26.667Z,1509696146.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:27.069Z,1509696147.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:27.098Z,1509696147.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:27.466Z,1509696147.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:27.497Z,1509696147.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:27.866Z,1509696147.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:27.897Z,1509696147.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:28.255Z,1509696148.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:28.270Z,1509696148.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:28.655Z,1509696148.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:28.675Z,1509696148.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:29.053Z,1509696149.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:29.075Z,1509696149.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:29.451Z,1509696149.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:29.467Z,1509696149.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:29.866Z,1509696149.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:29.896Z,1509696149.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:30.266Z,1509696150.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:30.296Z,1509696150.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:30.666Z,1509696150.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:30.696Z,1509696150.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:31.052Z,1509696151.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:31.071Z,1509696151.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:31.452Z,1509696151.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:31.530Z,1509696151.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:31.857Z,1509696151.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:31.872Z,1509696151.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:32.257Z,1509696152.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:32.272Z,1509696152.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:32.657Z,1509696152.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:32.710Z,1509696152.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:33.069Z,1509696153.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:33.090Z,1509696153.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:36.155Z,1509696156.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:36.214Z,1509696156.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:36.366Z,1509696156.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:36.403Z,1509696156.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:36.755Z,1509696156.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:36.810Z,1509696156.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:37.153Z,1509696157.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:37.172Z,1509696157.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:37.554Z,1509696157.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:37.569Z,1509696157.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:37.970Z,1509696157.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:37.990Z,1509696157.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:38.366Z,1509696158.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:38.381Z,1509696158.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:38.768Z,1509696158.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:38.791Z,1509696158.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:39.140Z,1509696159.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:39.167Z,1509696159.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:39.555Z,1509696159.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:39.571Z,1509696159.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:39.953Z,1509696159.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:39.969Z,1509696159.969 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:39.969Z,1509696159.969 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 156
2017-11-03T08:02:39.970Z,1509696159.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:02:39.971Z,1509696159.971 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:39.971Z,1509696159.971 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 156
2017-11-03T08:02:39.971Z,1509696159.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:02:39.973Z,1509696159.973 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:39.974Z,1509696159.974 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 156
2017-11-03T08:02:39.974Z,1509696159.974 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:02:40.049Z,1509696160.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:02:40.049Z,1509696160.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:02:40.049Z,1509696160.049 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:02:40.343Z,1509696160.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:40.450Z,1509696160.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:02:40.450Z,1509696160.450 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 156
2017-11-03T08:02:40.450Z,1509696160.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:02:40.450Z,1509696160.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 156
2017-11-03T08:02:40.451Z,1509696160.451 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:02:40.451Z,1509696160.451 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 156
2017-11-03T08:02:40.767Z,1509696160.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:40.782Z,1509696160.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:02:40.783Z,1509696160.783 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:02:40.783Z,1509696160.783 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:02:40.783Z,1509696160.783 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:02:40.784Z,1509696160.784 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:02:40.784Z,1509696160.784 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:02:40.785Z,1509696160.785 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:02:40.785Z,1509696160.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:02:40.785Z,1509696160.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:02:41.162Z,1509696161.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:41.189Z,1509696161.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:02:41.190Z,1509696161.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:41.562Z,1509696161.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:41.576Z,1509696161.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:02:41.577Z,1509696161.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:41.945Z,1509696161.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:41.973Z,1509696161.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:02:41.974Z,1509696161.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:42.344Z,1509696162.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:42.373Z,1509696162.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:02:42.374Z,1509696162.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:42.740Z,1509696162.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:42.775Z,1509696162.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:02:42.776Z,1509696162.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:43.146Z,1509696163.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:43.170Z,1509696163.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:02:43.171Z,1509696163.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:43.544Z,1509696163.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:43.573Z,1509696163.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:02:43.574Z,1509696163.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:43.969Z,1509696163.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:43.983Z,1509696163.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:02:43.984Z,1509696163.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:44.365Z,1509696164.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:44.379Z,1509696164.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:02:44.380Z,1509696164.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:44.762Z,1509696164.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:44.783Z,1509696164.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:02:44.784Z,1509696164.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:45.141Z,1509696165.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:45.171Z,1509696165.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:02:45.172Z,1509696165.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:45.545Z,1509696165.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:45.576Z,1509696165.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:02:45.577Z,1509696165.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:45.946Z,1509696165.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:45.976Z,1509696165.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:02:45.977Z,1509696165.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:46.345Z,1509696166.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:46.359Z,1509696166.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:02:46.360Z,1509696166.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:46.757Z,1509696166.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:46.783Z,1509696166.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:02:46.785Z,1509696166.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:47.161Z,1509696167.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:47.194Z,1509696167.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:02:47.195Z,1509696167.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:47.557Z,1509696167.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:47.584Z,1509696167.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:02:47.585Z,1509696167.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:47.945Z,1509696167.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:47.959Z,1509696167.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:02:47.961Z,1509696167.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:48.345Z,1509696168.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:48.359Z,1509696168.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:02:48.360Z,1509696168.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:48.745Z,1509696168.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:48.836Z,1509696168.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T08:02:48.837Z,1509696168.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:49.150Z,1509696169.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:49.165Z,1509696169.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:02:49.165Z,1509696169.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:49.549Z,1509696169.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:49.597Z,1509696169.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:02:49.598Z,1509696169.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:49.961Z,1509696169.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:49.991Z,1509696169.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:02:49.992Z,1509696169.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:50.362Z,1509696170.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:50.406Z,1509696170.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:02:50.407Z,1509696170.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:50.762Z,1509696170.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:50.806Z,1509696170.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:02:50.807Z,1509696170.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:51.149Z,1509696171.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:51.163Z,1509696171.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:02:51.164Z,1509696171.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:51.549Z,1509696171.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:51.564Z,1509696171.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:02:51.565Z,1509696171.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:51.954Z,1509696171.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:51.990Z,1509696171.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:02:51.991Z,1509696171.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:52.349Z,1509696172.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:52.370Z,1509696172.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:02:52.371Z,1509696172.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:52.763Z,1509696172.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:52.794Z,1509696172.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:02:52.795Z,1509696172.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:53.162Z,1509696173.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:53.193Z,1509696173.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:02:53.194Z,1509696173.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:53.558Z,1509696173.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:53.578Z,1509696173.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:02:53.579Z,1509696173.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:53.952Z,1509696173.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:53.967Z,1509696173.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:02:53.969Z,1509696173.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:54.352Z,1509696174.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:54.367Z,1509696174.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:02:54.368Z,1509696174.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:54.749Z,1509696174.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:54.763Z,1509696174.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:02:54.764Z,1509696174.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:55.152Z,1509696175.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:55.175Z,1509696175.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:02:55.176Z,1509696175.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:55.552Z,1509696175.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:55.570Z,1509696175.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:02:55.571Z,1509696175.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:55.965Z,1509696175.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:55.979Z,1509696175.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:02:55.980Z,1509696175.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:56.354Z,1509696176.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:56.368Z,1509696176.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:02:56.369Z,1509696176.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:56.757Z,1509696176.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:56.772Z,1509696176.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:02:56.773Z,1509696176.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:57.149Z,1509696177.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:57.163Z,1509696177.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:02:57.164Z,1509696177.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:57.548Z,1509696177.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:57.563Z,1509696177.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:02:57.563Z,1509696177.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:57.953Z,1509696177.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:57.968Z,1509696177.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:02:57.969Z,1509696177.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:58.352Z,1509696178.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:58.374Z,1509696178.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:02:58.375Z,1509696178.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:58.765Z,1509696178.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:58.780Z,1509696178.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:02:58.797Z,1509696178.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:59.158Z,1509696179.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:59.172Z,1509696179.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:02:59.173Z,1509696179.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:59.556Z,1509696179.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:59.571Z,1509696179.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:02:59.571Z,1509696179.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:02:59.954Z,1509696179.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:02:59.971Z,1509696179.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:00.352Z,1509696180.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:00.367Z,1509696180.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:00.753Z,1509696180.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:00.774Z,1509696180.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:01.154Z,1509696181.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:01.175Z,1509696181.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:01.552Z,1509696181.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:01.567Z,1509696181.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:01.961Z,1509696181.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:01.982Z,1509696181.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:02.359Z,1509696182.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:02.419Z,1509696182.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:02.764Z,1509696182.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:02.826Z,1509696182.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:03.154Z,1509696183.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:03.169Z,1509696183.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:03.554Z,1509696183.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:03.613Z,1509696183.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:03.953Z,1509696183.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:03.969Z,1509696183.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:04.340Z,1509696184.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:04.391Z,1509696184.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:04.762Z,1509696184.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:04.819Z,1509696184.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:05.167Z,1509696185.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:05.187Z,1509696185.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:05.564Z,1509696185.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:05.579Z,1509696185.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:05.955Z,1509696185.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:05.975Z,1509696185.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:06.355Z,1509696186.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:06.375Z,1509696186.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:06.755Z,1509696186.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:06.770Z,1509696186.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:07.155Z,1509696187.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:07.175Z,1509696187.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:07.552Z,1509696187.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:07.574Z,1509696187.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:07.968Z,1509696187.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:07.982Z,1509696187.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:08.360Z,1509696188.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:08.375Z,1509696188.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:08.765Z,1509696188.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:08.780Z,1509696188.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:09.140Z,1509696189.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:09.166Z,1509696189.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:09.541Z,1509696189.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:09.566Z,1509696189.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:09.953Z,1509696189.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:09.968Z,1509696189.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:10.355Z,1509696190.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:10.370Z,1509696190.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:10.765Z,1509696190.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:10.780Z,1509696190.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:11.165Z,1509696191.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:11.180Z,1509696191.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:11.568Z,1509696191.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:11.583Z,1509696191.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:11.955Z,1509696191.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:11.975Z,1509696191.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:12.353Z,1509696192.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:12.373Z,1509696192.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:12.754Z,1509696192.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:12.769Z,1509696192.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:13.154Z,1509696193.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:13.169Z,1509696193.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:13.553Z,1509696193.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:13.605Z,1509696193.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:13.966Z,1509696193.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:13.980Z,1509696193.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:14.365Z,1509696194.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:14.380Z,1509696194.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:14.765Z,1509696194.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:14.780Z,1509696194.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:15.155Z,1509696195.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:15.163Z,1509696195.163 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:03:15.164Z,1509696195.164 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:03:15.164Z,1509696195.164 [BPC1](ERROR): Data Fault
2017-11-03T08:03:15.172Z,1509696195.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:15.245Z,1509696195.245 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:03:15.544Z,1509696195.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:15.570Z,1509696195.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:15.946Z,1509696195.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:15.972Z,1509696195.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:16.341Z,1509696196.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:16.369Z,1509696196.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:16.460Z,1509696196.460 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:03:16.460Z,1509696196.460 [BPC1] No Fault, FailCount= 1
2017-11-03T08:03:16.762Z,1509696196.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:16.835Z,1509696196.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:17.166Z,1509696197.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:17.181Z,1509696197.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:17.570Z,1509696197.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:17.616Z,1509696197.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:17.941Z,1509696197.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:17.971Z,1509696197.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:18.345Z,1509696198.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:18.381Z,1509696198.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:18.747Z,1509696198.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:18.779Z,1509696198.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:19.148Z,1509696199.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:19.178Z,1509696199.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:19.544Z,1509696199.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:19.576Z,1509696199.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:19.970Z,1509696199.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:19.985Z,1509696199.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:20.369Z,1509696200.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:20.385Z,1509696200.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:20.757Z,1509696200.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:20.791Z,1509696200.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:21.140Z,1509696201.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:21.155Z,1509696201.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:21.541Z,1509696201.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:21.555Z,1509696201.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:21.945Z,1509696201.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:21.977Z,1509696201.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:22.344Z,1509696202.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:22.359Z,1509696202.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:22.757Z,1509696202.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:22.784Z,1509696202.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:23.161Z,1509696203.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:23.195Z,1509696203.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:23.561Z,1509696203.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:23.586Z,1509696203.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:23.945Z,1509696203.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:23.959Z,1509696203.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:24.344Z,1509696204.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:24.359Z,1509696204.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:24.745Z,1509696204.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:24.760Z,1509696204.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:25.146Z,1509696205.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:25.161Z,1509696205.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:25.544Z,1509696205.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:25.559Z,1509696205.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:25.957Z,1509696205.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:25.983Z,1509696205.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:26.358Z,1509696206.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:26.383Z,1509696206.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:26.761Z,1509696206.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:26.788Z,1509696206.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:27.148Z,1509696207.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:27.162Z,1509696207.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:27.546Z,1509696207.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:27.561Z,1509696207.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:27.950Z,1509696207.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:27.977Z,1509696207.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:28.348Z,1509696208.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:28.362Z,1509696208.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:28.758Z,1509696208.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:28.785Z,1509696208.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:29.162Z,1509696209.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:29.188Z,1509696209.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:29.561Z,1509696209.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:29.608Z,1509696209.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:29.945Z,1509696209.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:29.960Z,1509696209.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:30.345Z,1509696210.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:30.360Z,1509696210.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:30.743Z,1509696210.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:30.759Z,1509696210.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:31.145Z,1509696211.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:31.161Z,1509696211.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:31.551Z,1509696211.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:31.584Z,1509696211.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:31.962Z,1509696211.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:31.987Z,1509696211.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:32.357Z,1509696212.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:32.391Z,1509696212.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:32.773Z,1509696212.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:32.781Z,1509696212.781 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:03:32.781Z,1509696212.781 [BPC1] Communications Fault, FailCount= 2
2017-11-03T08:03:32.782Z,1509696212.782 [BPC1](ERROR): Communications Fault
2017-11-03T08:03:32.790Z,1509696212.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:32.869Z,1509696212.869 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:03:33.152Z,1509696213.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:33.167Z,1509696213.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:36.234Z,1509696216.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:36.250Z,1509696216.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:36.360Z,1509696216.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:36.390Z,1509696216.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:36.485Z,1509696216.485 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:03:36.485Z,1509696216.485 [BPC1] No Fault, FailCount= 2
2017-11-03T08:03:36.790Z,1509696216.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:36.878Z,1509696216.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:37.181Z,1509696217.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:37.196Z,1509696217.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:37.585Z,1509696217.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:37.642Z,1509696217.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:37.963Z,1509696217.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:37.988Z,1509696217.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:38.363Z,1509696218.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:38.389Z,1509696218.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:38.763Z,1509696218.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:38.788Z,1509696218.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:39.164Z,1509696219.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:39.189Z,1509696219.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:39.555Z,1509696219.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:39.590Z,1509696219.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:39.981Z,1509696219.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:39.996Z,1509696219.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:40.378Z,1509696220.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:40.393Z,1509696220.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:40.785Z,1509696220.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:40.800Z,1509696220.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:41.161Z,1509696221.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:41.192Z,1509696221.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:41.556Z,1509696221.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:41.571Z,1509696221.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:41.964Z,1509696221.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:41.998Z,1509696221.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:42.360Z,1509696222.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:42.391Z,1509696222.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:42.769Z,1509696222.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:42.797Z,1509696222.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:43.169Z,1509696223.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:43.197Z,1509696223.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:43.573Z,1509696223.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:43.603Z,1509696223.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:43.960Z,1509696223.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:43.975Z,1509696223.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:44.361Z,1509696224.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:44.376Z,1509696224.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:44.761Z,1509696224.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:44.776Z,1509696224.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:45.161Z,1509696225.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:45.176Z,1509696225.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:45.561Z,1509696225.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:45.576Z,1509696225.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:45.973Z,1509696225.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:45.998Z,1509696225.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:46.373Z,1509696226.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:46.399Z,1509696226.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:46.773Z,1509696226.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:46.814Z,1509696226.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:47.163Z,1509696227.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:47.179Z,1509696227.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:47.560Z,1509696227.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:47.574Z,1509696227.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:47.961Z,1509696227.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:47.976Z,1509696227.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:48.359Z,1509696228.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:48.420Z,1509696228.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:48.773Z,1509696228.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:48.805Z,1509696228.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:49.173Z,1509696229.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:49.205Z,1509696229.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:49.573Z,1509696229.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:49.605Z,1509696229.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:49.960Z,1509696229.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:50.004Z,1509696230.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:50.360Z,1509696230.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:50.375Z,1509696230.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:50.760Z,1509696230.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:50.814Z,1509696230.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:51.161Z,1509696231.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:51.204Z,1509696231.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:51.560Z,1509696231.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:51.577Z,1509696231.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:51.973Z,1509696231.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:52.004Z,1509696232.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:52.373Z,1509696232.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:52.404Z,1509696232.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:52.777Z,1509696232.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:52.807Z,1509696232.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:53.163Z,1509696233.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:53.178Z,1509696233.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:53.563Z,1509696233.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:53.578Z,1509696233.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:53.964Z,1509696233.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:53.979Z,1509696233.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:54.365Z,1509696234.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:54.380Z,1509696234.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:54.777Z,1509696234.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:54.809Z,1509696234.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:55.173Z,1509696235.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:55.188Z,1509696235.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:55.581Z,1509696235.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:55.611Z,1509696235.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:55.965Z,1509696235.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:55.980Z,1509696235.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:56.363Z,1509696236.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:56.378Z,1509696236.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:56.764Z,1509696236.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:56.779Z,1509696236.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:57.170Z,1509696237.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:57.185Z,1509696237.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:57.564Z,1509696237.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:57.580Z,1509696237.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:57.978Z,1509696237.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:58.009Z,1509696238.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:58.382Z,1509696238.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:58.414Z,1509696238.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:58.774Z,1509696238.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:58.790Z,1509696238.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:59.168Z,1509696239.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:59.183Z,1509696239.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:59.571Z,1509696239.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:59.586Z,1509696239.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:03:59.972Z,1509696239.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:03:59.995Z,1509696239.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:00.360Z,1509696240.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:00.375Z,1509696240.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:00.789Z,1509696240.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:00.819Z,1509696240.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:01.181Z,1509696241.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:01.212Z,1509696241.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:01.581Z,1509696241.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:01.635Z,1509696241.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:01.967Z,1509696241.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:01.987Z,1509696241.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:02.368Z,1509696242.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:02.387Z,1509696242.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:02.766Z,1509696242.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:02.785Z,1509696242.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:03.169Z,1509696243.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:03.184Z,1509696243.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:03.568Z,1509696243.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:03.635Z,1509696243.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:03.973Z,1509696243.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:03.989Z,1509696243.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:04.377Z,1509696244.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:04.392Z,1509696244.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:04.776Z,1509696244.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:04.827Z,1509696244.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:05.172Z,1509696245.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:05.187Z,1509696245.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:05.572Z,1509696245.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:05.622Z,1509696245.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:05.973Z,1509696245.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:06.021Z,1509696246.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:06.368Z,1509696246.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:06.384Z,1509696246.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:06.778Z,1509696246.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:06.793Z,1509696246.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:07.174Z,1509696247.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:07.189Z,1509696247.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:07.577Z,1509696247.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:07.593Z,1509696247.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:07.971Z,1509696247.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:07.991Z,1509696247.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:08.372Z,1509696248.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:08.387Z,1509696248.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:08.771Z,1509696248.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:08.786Z,1509696248.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:09.167Z,1509696249.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:09.183Z,1509696249.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:09.563Z,1509696249.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:09.599Z,1509696249.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:09.974Z,1509696249.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:09.990Z,1509696249.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:10.373Z,1509696250.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:10.388Z,1509696250.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:10.772Z,1509696250.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:10.788Z,1509696250.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:11.170Z,1509696251.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:11.186Z,1509696251.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:11.565Z,1509696251.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:11.580Z,1509696251.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:11.958Z,1509696251.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:11.985Z,1509696251.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:12.368Z,1509696252.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:12.383Z,1509696252.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:12.777Z,1509696252.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:12.792Z,1509696252.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:13.177Z,1509696253.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:13.193Z,1509696253.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:13.576Z,1509696253.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:13.595Z,1509696253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:13.972Z,1509696253.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:13.987Z,1509696253.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:14.371Z,1509696254.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:14.391Z,1509696254.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:14.768Z,1509696254.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:14.783Z,1509696254.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:15.172Z,1509696255.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:15.187Z,1509696255.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:15.571Z,1509696255.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:15.591Z,1509696255.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:15.976Z,1509696255.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:15.991Z,1509696255.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:16.377Z,1509696256.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:16.392Z,1509696256.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:16.776Z,1509696256.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:16.842Z,1509696256.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:17.171Z,1509696257.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:17.191Z,1509696257.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:17.571Z,1509696257.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:17.586Z,1509696257.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:17.971Z,1509696257.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:17.991Z,1509696257.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:18.368Z,1509696258.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:18.439Z,1509696258.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:18.784Z,1509696258.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:18.799Z,1509696258.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:19.184Z,1509696259.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:19.231Z,1509696259.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:19.581Z,1509696259.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:19.596Z,1509696259.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:19.971Z,1509696259.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:20.025Z,1509696260.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:20.356Z,1509696260.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:20.424Z,1509696260.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:20.768Z,1509696260.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:20.790Z,1509696260.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:21.172Z,1509696261.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:21.187Z,1509696261.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:21.556Z,1509696261.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:21.582Z,1509696261.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:21.981Z,1509696261.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:21.996Z,1509696261.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:22.388Z,1509696262.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:22.403Z,1509696262.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:22.781Z,1509696262.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:22.796Z,1509696262.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:23.170Z,1509696263.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:23.191Z,1509696263.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:23.571Z,1509696263.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:23.586Z,1509696263.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:23.956Z,1509696263.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:23.981Z,1509696263.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:24.368Z,1509696264.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:24.391Z,1509696264.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:24.784Z,1509696264.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:24.799Z,1509696264.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:25.184Z,1509696265.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:25.203Z,1509696265.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:25.581Z,1509696265.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:25.596Z,1509696265.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:25.971Z,1509696265.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:25.986Z,1509696265.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:26.356Z,1509696266.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:26.382Z,1509696266.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:26.769Z,1509696266.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:26.786Z,1509696266.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:27.172Z,1509696267.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:27.187Z,1509696267.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:27.570Z,1509696267.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:27.585Z,1509696267.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:27.981Z,1509696267.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:27.996Z,1509696267.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:28.384Z,1509696268.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:28.406Z,1509696268.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:28.781Z,1509696268.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:28.803Z,1509696268.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:29.171Z,1509696269.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:29.191Z,1509696269.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:29.571Z,1509696269.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:29.586Z,1509696269.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:29.958Z,1509696269.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:29.984Z,1509696269.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:30.371Z,1509696270.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:30.391Z,1509696270.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:30.784Z,1509696270.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:30.806Z,1509696270.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:31.181Z,1509696271.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:31.247Z,1509696271.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:31.581Z,1509696271.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:31.603Z,1509696271.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:31.971Z,1509696271.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:31.986Z,1509696271.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:32.370Z,1509696272.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:32.385Z,1509696272.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:32.770Z,1509696272.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:32.785Z,1509696272.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:33.177Z,1509696273.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:33.192Z,1509696273.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:33.195Z,1509696273.195 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T07:59:32.8Z
2017-11-03T08:04:33.195Z,1509696273.195 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T08:04:33.195Z,1509696273.195 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T08:04:36.253Z,1509696276.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:36.270Z,1509696276.270 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:04:36.270Z,1509696276.270 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:04:36.270Z,1509696276.270 [BPC1](ERROR): Communications Fault
2017-11-03T08:04:36.279Z,1509696276.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:36.366Z,1509696276.366 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:04:36.687Z,1509696276.687 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20171103T001125/Courier0184.lzma
2017-11-03T08:04:36.730Z,1509696276.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:36.746Z,1509696276.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:37.005Z,1509696277.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:37.034Z,1509696277.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:37.375Z,1509696277.375 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0184.lzma.bak
2017-11-03T08:04:37.375Z,1509696277.375 [DataOverHttps](INFO): SBD MOMSN=5183087
2017-11-03T08:04:37.409Z,1509696277.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:37.451Z,1509696277.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:37.553Z,1509696277.553 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:04:37.553Z,1509696277.553 [BPC1] No Fault, FailCount= 1
2017-11-03T08:04:38.028Z,1509696278.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:38.098Z,1509696278.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:38.208Z,1509696278.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:38.243Z,1509696278.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:41.423Z,1509696281.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:41.438Z,1509696281.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:41.581Z,1509696281.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:41.639Z,1509696281.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:41.988Z,1509696281.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:42.003Z,1509696282.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:42.388Z,1509696282.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:42.403Z,1509696282.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:42.774Z,1509696282.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:42.789Z,1509696282.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:43.180Z,1509696283.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:43.195Z,1509696283.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:46.246Z,1509696286.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:46.261Z,1509696286.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:46.381Z,1509696286.381 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20171103T001125/Express0185.lzma
2017-11-03T08:04:46.416Z,1509696286.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:46.447Z,1509696286.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:46.829Z,1509696286.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:46.879Z,1509696286.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:47.187Z,1509696287.187 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0185.lzma.bak
2017-11-03T08:04:47.187Z,1509696287.187 [DataOverHttps](INFO): SBD MOMSN=5183089
2017-11-03T08:04:47.239Z,1509696287.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:47.245Z,1509696287.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x10912 got:0x56960
2017-11-03T08:04:47.263Z,1509696287.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:47.825Z,1509696287.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:47.841Z,1509696287.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:47.844Z,1509696287.844 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T08:04:47.844Z,1509696287.844 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T08:04:47.844Z,1509696287.844 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T08:04:48.010Z,1509696288.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:48.036Z,1509696288.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:51.124Z,1509696291.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:51.139Z,1509696291.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:51.261Z,1509696291.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:51.292Z,1509696291.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:51.672Z,1509696291.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:51.687Z,1509696291.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:52.069Z,1509696292.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:52.091Z,1509696292.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:52.451Z,1509696292.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:52.543Z,1509696292.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:52.847Z,1509696292.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:52.892Z,1509696292.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:53.251Z,1509696293.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:53.303Z,1509696293.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:53.655Z,1509696293.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:53.670Z,1509696293.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:54.035Z,1509696294.035 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T08:04:54.036Z,1509696294.036 [NAL9602] Data Fault, FailCount= 3
2017-11-03T08:04:54.036Z,1509696294.036 [NAL9602](ERROR): Data Fault
2017-11-03T08:04:54.053Z,1509696294.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:54.114Z,1509696294.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:54.232Z,1509696294.232 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T08:04:54.436Z,1509696294.436 [NAL9602](INFO): Powering down
2017-11-03T08:04:54.454Z,1509696294.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:54.469Z,1509696294.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:54.850Z,1509696294.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:54.907Z,1509696294.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:55.255Z,1509696295.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:55.294Z,1509696295.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:55.381Z,1509696295.381 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T08:04:55.381Z,1509696295.381 [NAL9602] No Fault, FailCount= 3
2017-11-03T08:04:55.655Z,1509696295.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:55.670Z,1509696295.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:56.055Z,1509696296.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:56.070Z,1509696296.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:56.455Z,1509696296.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:56.470Z,1509696296.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:56.581Z,1509696296.581 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:04:56.581Z,1509696296.581 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T08:04:56.852Z,1509696296.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:56.867Z,1509696296.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:56.868Z,1509696296.868 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:04:56.869Z,1509696296.869 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:04:56.869Z,1509696296.869 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:04:56.869Z,1509696296.869 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:04:57.251Z,1509696297.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:57.267Z,1509696297.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:57.655Z,1509696297.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:57.670Z,1509696297.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:58.057Z,1509696298.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:58.072Z,1509696298.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:58.450Z,1509696298.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:58.471Z,1509696298.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:58.851Z,1509696298.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:58.866Z,1509696298.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:59.254Z,1509696299.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:59.269Z,1509696299.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:04:59.657Z,1509696299.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:04:59.672Z,1509696299.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:00.052Z,1509696300.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:00.067Z,1509696300.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:00.451Z,1509696300.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:00.470Z,1509696300.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:00.854Z,1509696300.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:00.869Z,1509696300.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:01.023Z,1509696301.023 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:05:01.079Z,1509696301.079 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:05:01.081Z,1509696301.081 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:05:01.081Z,1509696301.081 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:05:01.082Z,1509696301.082 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:05:01.260Z,1509696301.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:01.281Z,1509696301.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:01.663Z,1509696301.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:01.678Z,1509696301.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:02.060Z,1509696302.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:02.076Z,1509696302.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:02.457Z,1509696302.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:02.472Z,1509696302.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:02.856Z,1509696302.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:02.882Z,1509696302.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:03.263Z,1509696303.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:03.279Z,1509696303.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:03.657Z,1509696303.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:03.672Z,1509696303.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:04.056Z,1509696304.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:04.078Z,1509696304.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:04.461Z,1509696304.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:04.476Z,1509696304.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:04.859Z,1509696304.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:04.874Z,1509696304.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:05.244Z,1509696305.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:05.274Z,1509696305.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:05.657Z,1509696305.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:05.722Z,1509696305.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:06.051Z,1509696306.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:06.095Z,1509696306.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:06.448Z,1509696306.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:06.473Z,1509696306.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:06.844Z,1509696306.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:06.914Z,1509696306.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:07.248Z,1509696307.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:07.273Z,1509696307.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:07.670Z,1509696307.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:07.720Z,1509696307.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:08.062Z,1509696308.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:08.123Z,1509696308.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:08.448Z,1509696308.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:08.473Z,1509696308.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:08.848Z,1509696308.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:08.874Z,1509696308.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:09.261Z,1509696309.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:09.277Z,1509696309.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:09.652Z,1509696309.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:09.682Z,1509696309.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:10.046Z,1509696310.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:10.072Z,1509696310.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:10.448Z,1509696310.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:10.474Z,1509696310.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:10.849Z,1509696310.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:10.878Z,1509696310.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:11.251Z,1509696311.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:11.276Z,1509696311.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:11.648Z,1509696311.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:11.674Z,1509696311.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:12.050Z,1509696312.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:12.076Z,1509696312.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:12.461Z,1509696312.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:12.482Z,1509696312.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:12.846Z,1509696312.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:12.871Z,1509696312.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:13.250Z,1509696313.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:13.276Z,1509696313.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:13.648Z,1509696313.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:13.673Z,1509696313.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:14.061Z,1509696314.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:14.076Z,1509696314.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:14.451Z,1509696314.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:14.476Z,1509696314.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:14.846Z,1509696314.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:14.878Z,1509696314.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:15.251Z,1509696315.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:15.285Z,1509696315.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:15.650Z,1509696315.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:15.675Z,1509696315.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:16.051Z,1509696316.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:16.082Z,1509696316.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:16.490Z,1509696316.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:16.523Z,1509696316.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:16.847Z,1509696316.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:16.872Z,1509696316.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:17.262Z,1509696317.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:17.277Z,1509696317.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:17.649Z,1509696317.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:17.680Z,1509696317.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:18.048Z,1509696318.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:18.063Z,1509696318.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:18.452Z,1509696318.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:18.527Z,1509696318.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:18.850Z,1509696318.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:18.865Z,1509696318.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:19.254Z,1509696319.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:19.307Z,1509696319.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:19.648Z,1509696319.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:19.663Z,1509696319.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:20.050Z,1509696320.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:20.107Z,1509696320.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:20.454Z,1509696320.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:20.499Z,1509696320.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:20.879Z,1509696320.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:20.899Z,1509696320.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:21.255Z,1509696321.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:21.283Z,1509696321.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:21.658Z,1509696321.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:21.681Z,1509696321.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:22.060Z,1509696322.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:22.076Z,1509696322.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:22.460Z,1509696322.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:22.475Z,1509696322.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:22.862Z,1509696322.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:22.882Z,1509696322.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:23.301Z,1509696323.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:23.338Z,1509696323.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:23.663Z,1509696323.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:23.683Z,1509696323.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:24.060Z,1509696324.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:24.075Z,1509696324.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:24.457Z,1509696324.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:24.472Z,1509696324.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:24.834Z,1509696324.834 [NAL9602](INFO): Powering up NAL9602
2017-11-03T08:05:24.864Z,1509696324.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:24.879Z,1509696324.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:25.302Z,1509696325.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:25.336Z,1509696325.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:25.658Z,1509696325.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:25.679Z,1509696325.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:26.052Z,1509696326.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:26.075Z,1509696326.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:26.456Z,1509696326.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:26.470Z,1509696326.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:26.857Z,1509696326.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:26.872Z,1509696326.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:27.258Z,1509696327.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:27.279Z,1509696327.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:27.656Z,1509696327.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:27.671Z,1509696327.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:28.059Z,1509696328.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:28.074Z,1509696328.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:28.462Z,1509696328.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:28.477Z,1509696328.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:28.856Z,1509696328.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:28.871Z,1509696328.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:29.258Z,1509696329.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:29.279Z,1509696329.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:29.658Z,1509696329.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:29.679Z,1509696329.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:30.061Z,1509696330.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:30.076Z,1509696330.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:30.459Z,1509696330.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:30.479Z,1509696330.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:30.855Z,1509696330.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:30.870Z,1509696330.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:31.258Z,1509696331.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:31.314Z,1509696331.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:31.660Z,1509696331.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:31.729Z,1509696331.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:32.060Z,1509696332.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:32.075Z,1509696332.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:32.461Z,1509696332.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:32.476Z,1509696332.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:32.865Z,1509696332.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:32.919Z,1509696332.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:33.256Z,1509696333.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:33.271Z,1509696333.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:33.661Z,1509696333.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:33.711Z,1509696333.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:34.052Z,1509696334.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:34.099Z,1509696334.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:34.452Z,1509696334.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:34.467Z,1509696334.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:34.857Z,1509696334.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:34.872Z,1509696334.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:35.270Z,1509696335.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:35.292Z,1509696335.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:35.635Z,1509696335.635 [NAL9602](INFO): NAL9602 initialized
2017-11-03T08:05:35.652Z,1509696335.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:35.668Z,1509696335.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:36.052Z,1509696336.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:36.068Z,1509696336.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:36.466Z,1509696336.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:36.496Z,1509696336.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:36.870Z,1509696336.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:36.892Z,1509696336.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:37.303Z,1509696337.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:37.322Z,1509696337.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:37.655Z,1509696337.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:37.670Z,1509696337.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:38.060Z,1509696338.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:38.075Z,1509696338.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:38.457Z,1509696338.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:38.473Z,1509696338.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:38.853Z,1509696338.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:38.867Z,1509696338.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:39.298Z,1509696339.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:39.325Z,1509696339.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:39.662Z,1509696339.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:39.678Z,1509696339.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:40.065Z,1509696340.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:40.080Z,1509696340.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:40.462Z,1509696340.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:40.477Z,1509696340.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:40.854Z,1509696340.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:40.869Z,1509696340.869 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:40.870Z,1509696340.870 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 157
2017-11-03T08:05:40.870Z,1509696340.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:05:40.871Z,1509696340.871 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:40.871Z,1509696340.871 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 157
2017-11-03T08:05:40.872Z,1509696340.872 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:05:40.873Z,1509696340.873 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:40.874Z,1509696340.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 157
2017-11-03T08:05:40.874Z,1509696340.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:05:40.953Z,1509696340.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:05:40.953Z,1509696340.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:05:40.953Z,1509696340.953 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:05:41.269Z,1509696341.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:41.388Z,1509696341.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:05:41.389Z,1509696341.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 157
2017-11-03T08:05:41.389Z,1509696341.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:05:41.389Z,1509696341.389 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 157
2017-11-03T08:05:41.390Z,1509696341.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:05:41.390Z,1509696341.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 157
2017-11-03T08:05:41.661Z,1509696341.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:41.675Z,1509696341.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:05:41.676Z,1509696341.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:05:41.676Z,1509696341.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:05:41.677Z,1509696341.677 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:05:41.677Z,1509696341.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:05:41.677Z,1509696341.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:05:41.678Z,1509696341.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:05:41.678Z,1509696341.678 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:05:41.678Z,1509696341.678 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:05:42.062Z,1509696342.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:42.083Z,1509696342.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:42.472Z,1509696342.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:42.487Z,1509696342.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:42.869Z,1509696342.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:42.884Z,1509696342.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:43.272Z,1509696343.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:43.287Z,1509696343.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:43.658Z,1509696343.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:43.673Z,1509696343.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:44.056Z,1509696344.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:44.078Z,1509696344.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:44.458Z,1509696344.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:44.519Z,1509696344.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:44.850Z,1509696344.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:44.926Z,1509696344.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:45.245Z,1509696345.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:45.275Z,1509696345.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:45.676Z,1509696345.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:45.691Z,1509696345.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:46.073Z,1509696346.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:46.123Z,1509696346.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:46.472Z,1509696346.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:46.487Z,1509696346.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:46.849Z,1509696346.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:46.917Z,1509696346.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:47.248Z,1509696347.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:47.318Z,1509696347.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:47.648Z,1509696347.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:47.673Z,1509696347.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:48.063Z,1509696348.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:48.078Z,1509696348.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:48.476Z,1509696348.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:48.491Z,1509696348.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:51.773Z,1509696351.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:51.789Z,1509696351.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:51.914Z,1509696351.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:51.939Z,1509696351.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:52.306Z,1509696352.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:52.375Z,1509696352.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:52.749Z,1509696352.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:52.774Z,1509696352.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:53.104Z,1509696353.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:53.130Z,1509696353.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:53.526Z,1509696353.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:53.541Z,1509696353.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:53.925Z,1509696353.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:53.940Z,1509696353.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:54.325Z,1509696354.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:54.347Z,1509696354.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:54.755Z,1509696354.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:54.799Z,1509696354.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:55.107Z,1509696355.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:55.133Z,1509696355.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:55.504Z,1509696355.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:55.530Z,1509696355.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:55.906Z,1509696355.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:55.933Z,1509696355.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:56.307Z,1509696356.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:56.333Z,1509696356.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:56.770Z,1509696356.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:56.804Z,1509696356.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:57.125Z,1509696357.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:57.140Z,1509696357.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:57.526Z,1509696357.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:57.541Z,1509696357.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:57.910Z,1509696357.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:57.931Z,1509696357.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:58.310Z,1509696358.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:58.366Z,1509696358.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:58.751Z,1509696358.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:58.781Z,1509696358.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:59.115Z,1509696359.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:59.130Z,1509696359.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:59.522Z,1509696359.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:59.579Z,1509696359.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:05:59.922Z,1509696359.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:05:59.958Z,1509696359.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:00.319Z,1509696360.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:00.375Z,1509696360.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:00.714Z,1509696360.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:00.813Z,1509696360.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:01.118Z,1509696361.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:01.142Z,1509696361.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:01.513Z,1509696361.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:01.537Z,1509696361.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:01.905Z,1509696361.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:01.945Z,1509696361.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:02.310Z,1509696362.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:02.345Z,1509696362.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:02.723Z,1509696362.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:02.743Z,1509696362.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:03.121Z,1509696363.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:03.143Z,1509696363.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:03.516Z,1509696363.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:03.563Z,1509696363.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:03.913Z,1509696363.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:03.961Z,1509696363.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:04.330Z,1509696364.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:04.365Z,1509696364.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:04.708Z,1509696364.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:04.723Z,1509696364.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:05.110Z,1509696365.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:05.125Z,1509696365.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:05.541Z,1509696365.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:05.581Z,1509696365.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:05.927Z,1509696365.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:05.951Z,1509696365.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:06.322Z,1509696366.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:06.342Z,1509696366.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:06.714Z,1509696366.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:06.741Z,1509696366.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:07.105Z,1509696367.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:07.157Z,1509696367.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:07.505Z,1509696367.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:07.557Z,1509696367.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:07.946Z,1509696367.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:07.965Z,1509696367.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:08.309Z,1509696368.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:08.352Z,1509696368.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:08.757Z,1509696368.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:08.874Z,1509696368.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:09.123Z,1509696369.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:09.163Z,1509696369.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:09.532Z,1509696369.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:09.574Z,1509696369.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:09.912Z,1509696369.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:09.953Z,1509696369.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:10.313Z,1509696370.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:10.363Z,1509696370.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:10.771Z,1509696370.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:10.826Z,1509696370.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:11.129Z,1509696371.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:11.169Z,1509696371.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:11.522Z,1509696371.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:11.617Z,1509696371.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:11.922Z,1509696371.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:11.967Z,1509696371.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:12.320Z,1509696372.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:12.359Z,1509696372.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:12.747Z,1509696372.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:12.867Z,1509696372.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:13.104Z,1509696373.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:13.138Z,1509696373.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:13.505Z,1509696373.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:13.535Z,1509696373.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:13.905Z,1509696373.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:13.982Z,1509696373.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:14.304Z,1509696374.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:14.347Z,1509696374.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:14.716Z,1509696374.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:14.809Z,1509696374.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:15.119Z,1509696375.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:15.181Z,1509696375.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:15.542Z,1509696375.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:15.562Z,1509696375.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:15.903Z,1509696375.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:15.935Z,1509696375.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:16.304Z,1509696376.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:16.359Z,1509696376.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:16.714Z,1509696376.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:16.737Z,1509696376.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:17.110Z,1509696377.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:17.131Z,1509696377.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:17.516Z,1509696377.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:17.531Z,1509696377.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:17.918Z,1509696377.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:17.933Z,1509696377.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:18.317Z,1509696378.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:18.332Z,1509696378.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:18.714Z,1509696378.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:18.729Z,1509696378.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:19.113Z,1509696379.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:19.128Z,1509696379.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:19.511Z,1509696379.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:19.525Z,1509696379.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:19.914Z,1509696379.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:19.928Z,1509696379.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:20.313Z,1509696380.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:20.328Z,1509696380.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:20.717Z,1509696380.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:20.738Z,1509696380.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:21.117Z,1509696381.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:21.131Z,1509696381.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:21.516Z,1509696381.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:21.531Z,1509696381.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:21.912Z,1509696381.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:21.927Z,1509696381.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:22.310Z,1509696382.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:22.325Z,1509696382.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:22.757Z,1509696382.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:22.795Z,1509696382.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:23.113Z,1509696383.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:23.128Z,1509696383.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:23.525Z,1509696383.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:23.540Z,1509696383.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:23.925Z,1509696383.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:23.940Z,1509696383.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:24.325Z,1509696384.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:24.340Z,1509696384.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:24.774Z,1509696384.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:24.823Z,1509696384.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:25.113Z,1509696385.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:25.132Z,1509696385.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:25.514Z,1509696385.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:25.535Z,1509696385.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:25.916Z,1509696385.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:25.931Z,1509696385.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:26.314Z,1509696386.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:26.371Z,1509696386.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:26.765Z,1509696386.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:26.802Z,1509696386.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:27.125Z,1509696387.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:27.146Z,1509696387.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:27.525Z,1509696387.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:27.590Z,1509696387.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:27.905Z,1509696387.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:27.939Z,1509696387.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:28.300Z,1509696388.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:28.330Z,1509696388.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:28.706Z,1509696388.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:28.821Z,1509696388.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:29.105Z,1509696389.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:29.139Z,1509696389.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:29.526Z,1509696389.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:29.579Z,1509696389.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:29.929Z,1509696389.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:29.979Z,1509696389.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:30.326Z,1509696390.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:30.341Z,1509696390.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:30.699Z,1509696390.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:30.730Z,1509696390.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:31.103Z,1509696391.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:31.135Z,1509696391.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:31.505Z,1509696391.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:31.534Z,1509696391.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:31.908Z,1509696391.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:31.933Z,1509696391.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:32.305Z,1509696392.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:32.333Z,1509696392.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:32.726Z,1509696392.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:32.741Z,1509696392.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:33.126Z,1509696393.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:33.141Z,1509696393.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:33.526Z,1509696393.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:33.541Z,1509696393.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:33.905Z,1509696393.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:33.934Z,1509696393.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:34.305Z,1509696394.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:34.340Z,1509696394.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:34.708Z,1509696394.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:34.734Z,1509696394.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:35.105Z,1509696395.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:35.133Z,1509696395.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:35.533Z,1509696395.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:35.555Z,1509696395.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:35.926Z,1509696395.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:35.941Z,1509696395.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:36.326Z,1509696396.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:36.341Z,1509696396.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:36.754Z,1509696396.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:36.807Z,1509696396.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:37.104Z,1509696397.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:37.138Z,1509696397.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:37.508Z,1509696397.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:37.535Z,1509696397.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:37.907Z,1509696397.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:37.943Z,1509696397.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:38.301Z,1509696398.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:38.337Z,1509696398.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:38.764Z,1509696398.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:38.791Z,1509696398.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:39.118Z,1509696399.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:39.145Z,1509696399.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:39.519Z,1509696399.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:39.543Z,1509696399.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:39.942Z,1509696399.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:39.963Z,1509696399.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:40.303Z,1509696400.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:40.319Z,1509696400.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:40.757Z,1509696400.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:40.844Z,1509696400.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:41.112Z,1509696401.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:41.131Z,1509696401.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:41.518Z,1509696401.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:41.534Z,1509696401.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:41.921Z,1509696401.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:41.959Z,1509696401.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:42.318Z,1509696402.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:42.333Z,1509696402.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:42.709Z,1509696402.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:42.724Z,1509696402.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:43.123Z,1509696403.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:43.179Z,1509696403.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:43.542Z,1509696403.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:43.575Z,1509696403.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:43.906Z,1509696403.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:43.968Z,1509696403.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:44.300Z,1509696404.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:44.386Z,1509696404.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:44.725Z,1509696404.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:44.740Z,1509696404.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:45.126Z,1509696405.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:45.141Z,1509696405.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:45.518Z,1509696405.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:45.533Z,1509696405.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:45.905Z,1509696405.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:45.939Z,1509696405.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:46.305Z,1509696406.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:46.332Z,1509696406.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:46.700Z,1509696406.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:46.731Z,1509696406.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:47.135Z,1509696407.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:47.150Z,1509696407.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:47.526Z,1509696407.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:47.541Z,1509696407.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:47.924Z,1509696407.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:47.939Z,1509696407.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:48.326Z,1509696408.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:48.341Z,1509696408.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:48.718Z,1509696408.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:48.733Z,1509696408.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:51.992Z,1509696411.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:52.033Z,1509696412.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:52.156Z,1509696412.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:52.186Z,1509696412.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:52.578Z,1509696412.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:52.593Z,1509696412.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:52.986Z,1509696412.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:53.001Z,1509696413.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:53.378Z,1509696413.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:53.393Z,1509696413.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:53.760Z,1509696413.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:53.818Z,1509696413.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:54.156Z,1509696414.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:54.192Z,1509696414.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:54.562Z,1509696414.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:54.611Z,1509696414.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:54.961Z,1509696414.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:54.993Z,1509696414.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:55.356Z,1509696415.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:55.371Z,1509696415.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:55.769Z,1509696415.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:55.796Z,1509696415.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:56.169Z,1509696416.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:56.197Z,1509696416.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:56.570Z,1509696416.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:56.595Z,1509696416.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:56.955Z,1509696416.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:57.014Z,1509696417.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:57.363Z,1509696417.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:57.378Z,1509696417.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:57.616Z,1509696417.616 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:06:57.616Z,1509696417.616 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T08:06:57.616Z,1509696417.616 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:06:57.764Z,1509696417.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:57.778Z,1509696417.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:06:57.779Z,1509696417.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:57.887Z,1509696417.887 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:06:58.020Z,1509696418.020 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:06:58.115Z,1509696418.115 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:06:58.172Z,1509696418.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:58.231Z,1509696418.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T08:06:58.244Z,1509696418.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:58.573Z,1509696418.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:58.611Z,1509696418.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:06:58.612Z,1509696418.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:58.973Z,1509696418.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:59.030Z,1509696419.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-03T08:06:59.031Z,1509696419.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:59.374Z,1509696419.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:59.426Z,1509696419.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:06:59.427Z,1509696419.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:06:59.534Z,1509696419.534 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:06:59.534Z,1509696419.534 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T08:06:59.732Z,1509696419.732 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:06:59.733Z,1509696419.733 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:06:59.733Z,1509696419.733 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:06:59.733Z,1509696419.733 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:06:59.796Z,1509696419.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:06:59.811Z,1509696419.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:06:59.812Z,1509696419.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:00.163Z,1509696420.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:00.177Z,1509696420.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:07:00.178Z,1509696420.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:00.560Z,1509696420.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:00.587Z,1509696420.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:07:00.588Z,1509696420.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:00.967Z,1509696420.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:00.982Z,1509696420.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:07:00.983Z,1509696420.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:01.365Z,1509696421.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:01.381Z,1509696421.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:07:01.382Z,1509696421.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:01.770Z,1509696421.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:01.786Z,1509696421.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:07:01.787Z,1509696421.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:02.177Z,1509696422.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:02.192Z,1509696422.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:07:02.216Z,1509696422.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:02.570Z,1509696422.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:02.591Z,1509696422.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:07:02.591Z,1509696422.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:02.963Z,1509696422.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:02.983Z,1509696422.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:07:02.984Z,1509696422.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:03.366Z,1509696423.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:03.381Z,1509696423.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:07:03.382Z,1509696423.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:03.768Z,1509696423.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:03.858Z,1509696423.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T08:07:03.860Z,1509696423.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:03.928Z,1509696423.928 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:07:04.018Z,1509696424.018 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:07:04.019Z,1509696424.019 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:07:04.019Z,1509696424.019 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:07:04.020Z,1509696424.020 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:07:04.166Z,1509696424.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:04.195Z,1509696424.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:07:04.216Z,1509696424.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:04.594Z,1509696424.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:04.636Z,1509696424.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:04.987Z,1509696424.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:05.016Z,1509696425.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:05.369Z,1509696425.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:05.385Z,1509696425.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:05.763Z,1509696425.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:05.796Z,1509696425.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:06.159Z,1509696426.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:06.185Z,1509696426.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:06.556Z,1509696426.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:06.586Z,1509696426.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:06.958Z,1509696426.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:06.985Z,1509696426.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:07.359Z,1509696427.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:07.385Z,1509696427.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:07.794Z,1509696427.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:07.810Z,1509696427.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:08.179Z,1509696428.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:08.194Z,1509696428.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:08.577Z,1509696428.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:08.593Z,1509696428.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:08.957Z,1509696428.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:08.985Z,1509696428.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:09.352Z,1509696429.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:09.383Z,1509696429.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:09.789Z,1509696429.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:09.804Z,1509696429.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:10.157Z,1509696430.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:10.187Z,1509696430.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:10.721Z,1509696430.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:10.736Z,1509696430.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:10.973Z,1509696430.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:10.995Z,1509696430.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:11.369Z,1509696431.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:11.385Z,1509696431.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:11.759Z,1509696431.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:11.827Z,1509696431.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:12.167Z,1509696432.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:12.187Z,1509696432.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:12.567Z,1509696432.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:12.622Z,1509696432.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:12.966Z,1509696432.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:12.984Z,1509696432.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:13.367Z,1509696433.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:13.426Z,1509696433.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:13.783Z,1509696433.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:13.866Z,1509696433.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:14.178Z,1509696434.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:14.193Z,1509696434.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:14.573Z,1509696434.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:14.588Z,1509696434.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:14.964Z,1509696434.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:14.987Z,1509696434.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:15.366Z,1509696435.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:15.386Z,1509696435.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:15.795Z,1509696435.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:15.857Z,1509696435.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:16.156Z,1509696436.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:16.186Z,1509696436.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:16.575Z,1509696436.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:16.596Z,1509696436.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:16.982Z,1509696436.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:16.997Z,1509696436.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:17.377Z,1509696437.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:17.392Z,1509696437.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:17.757Z,1509696437.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:17.786Z,1509696437.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:18.155Z,1509696438.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:18.186Z,1509696438.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:18.559Z,1509696438.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:18.585Z,1509696438.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:18.953Z,1509696438.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:18.987Z,1509696438.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:19.356Z,1509696439.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:19.386Z,1509696439.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:19.786Z,1509696439.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:19.901Z,1509696439.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:20.182Z,1509696440.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:20.196Z,1509696440.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:20.565Z,1509696440.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:20.599Z,1509696440.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:20.959Z,1509696440.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:20.994Z,1509696440.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:21.359Z,1509696441.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:21.396Z,1509696441.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:21.760Z,1509696441.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:21.794Z,1509696441.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:22.156Z,1509696442.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:22.194Z,1509696442.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:22.593Z,1509696442.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:22.607Z,1509696442.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:22.973Z,1509696442.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:23.002Z,1509696443.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:23.373Z,1509696443.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:23.405Z,1509696443.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:23.779Z,1509696443.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:23.809Z,1509696443.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:24.162Z,1509696444.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:24.183Z,1509696444.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:24.561Z,1509696444.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:24.577Z,1509696444.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:24.963Z,1509696444.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:24.977Z,1509696444.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:25.361Z,1509696445.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:25.377Z,1509696445.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:25.813Z,1509696445.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:25.878Z,1509696445.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:26.165Z,1509696446.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:26.228Z,1509696446.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:26.566Z,1509696446.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:26.581Z,1509696446.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:26.963Z,1509696446.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:26.990Z,1509696446.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:27.368Z,1509696447.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:27.426Z,1509696447.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:27.786Z,1509696447.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:27.830Z,1509696447.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:28.164Z,1509696448.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:28.221Z,1509696448.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:28.577Z,1509696448.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:28.626Z,1509696448.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:28.973Z,1509696448.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:28.988Z,1509696448.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:29.377Z,1509696449.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:29.392Z,1509696449.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:29.822Z,1509696449.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:29.869Z,1509696449.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:30.165Z,1509696450.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:30.186Z,1509696450.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:30.564Z,1509696450.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:30.587Z,1509696450.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:30.968Z,1509696450.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:30.983Z,1509696450.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:31.352Z,1509696451.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:31.378Z,1509696451.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:31.777Z,1509696451.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:31.792Z,1509696451.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:32.177Z,1509696452.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:32.198Z,1509696452.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:32.574Z,1509696452.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:32.589Z,1509696452.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:32.967Z,1509696452.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:32.987Z,1509696452.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:33.369Z,1509696453.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:33.384Z,1509696453.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:33.769Z,1509696453.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:33.791Z,1509696453.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:34.166Z,1509696454.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:34.181Z,1509696454.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:34.576Z,1509696454.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:34.596Z,1509696454.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:34.978Z,1509696454.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:34.993Z,1509696454.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:35.373Z,1509696455.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:35.392Z,1509696455.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:35.755Z,1509696455.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:35.787Z,1509696455.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:36.157Z,1509696456.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:36.188Z,1509696456.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:36.558Z,1509696456.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:36.587Z,1509696456.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:36.969Z,1509696456.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:36.984Z,1509696456.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:37.364Z,1509696457.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:37.380Z,1509696457.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:37.794Z,1509696457.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:37.821Z,1509696457.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:38.175Z,1509696458.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:38.190Z,1509696458.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:38.574Z,1509696458.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:38.595Z,1509696458.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:38.966Z,1509696458.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:38.995Z,1509696458.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:39.368Z,1509696459.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:39.391Z,1509696459.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:39.793Z,1509696459.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:39.823Z,1509696459.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:40.164Z,1509696460.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:40.235Z,1509696460.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:40.574Z,1509696460.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:40.635Z,1509696460.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:40.974Z,1509696460.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:40.995Z,1509696460.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:41.376Z,1509696461.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:41.419Z,1509696461.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:41.776Z,1509696461.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:41.796Z,1509696461.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:42.164Z,1509696462.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:42.220Z,1509696462.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:42.564Z,1509696462.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:42.619Z,1509696462.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:42.968Z,1509696462.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:42.983Z,1509696462.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:43.367Z,1509696463.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:43.387Z,1509696463.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:43.826Z,1509696463.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:43.877Z,1509696463.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:44.181Z,1509696464.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:44.196Z,1509696464.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:44.577Z,1509696464.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:44.592Z,1509696464.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:44.967Z,1509696464.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:44.982Z,1509696464.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:45.352Z,1509696465.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:45.378Z,1509696465.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:45.753Z,1509696465.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:45.779Z,1509696465.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:46.155Z,1509696466.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:46.181Z,1509696466.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:46.580Z,1509696466.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:46.595Z,1509696466.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:46.973Z,1509696466.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:46.988Z,1509696466.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:47.377Z,1509696467.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:47.392Z,1509696467.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:47.752Z,1509696467.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:47.778Z,1509696467.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:48.167Z,1509696468.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:48.187Z,1509696468.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:48.561Z,1509696468.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:48.576Z,1509696468.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:48.965Z,1509696468.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:48.996Z,1509696468.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:52.307Z,1509696472.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:52.350Z,1509696472.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:52.503Z,1509696472.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:52.519Z,1509696472.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:52.899Z,1509696472.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:52.919Z,1509696472.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:53.301Z,1509696473.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:53.317Z,1509696473.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:53.675Z,1509696473.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:53.766Z,1509696473.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:54.082Z,1509696474.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:54.105Z,1509696474.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:54.473Z,1509696474.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:54.534Z,1509696474.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:54.878Z,1509696474.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:54.938Z,1509696474.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:55.281Z,1509696475.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:55.295Z,1509696475.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:55.724Z,1509696475.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:55.799Z,1509696475.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:56.093Z,1509696476.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:56.124Z,1509696476.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:56.494Z,1509696476.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:56.551Z,1509696476.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:56.880Z,1509696476.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:56.934Z,1509696476.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:57.280Z,1509696477.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:57.295Z,1509696477.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:57.680Z,1509696477.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:57.702Z,1509696477.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:58.082Z,1509696478.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:58.103Z,1509696478.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:58.497Z,1509696478.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:58.519Z,1509696478.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:58.896Z,1509696478.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:58.911Z,1509696478.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:59.293Z,1509696479.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:59.309Z,1509696479.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:07:59.684Z,1509696479.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:07:59.699Z,1509696479.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:00.084Z,1509696480.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:00.103Z,1509696480.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:00.488Z,1509696480.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:00.503Z,1509696480.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:00.885Z,1509696480.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:00.900Z,1509696480.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:01.284Z,1509696481.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:01.303Z,1509696481.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:01.697Z,1509696481.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:01.712Z,1509696481.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:02.096Z,1509696482.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:02.111Z,1509696482.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:02.501Z,1509696482.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:02.516Z,1509696482.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:02.886Z,1509696482.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:02.901Z,1509696482.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:03.285Z,1509696483.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:03.300Z,1509696483.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:03.687Z,1509696483.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:03.701Z,1509696483.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:04.089Z,1509696484.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:04.104Z,1509696484.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:04.498Z,1509696484.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:04.513Z,1509696484.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:04.898Z,1509696484.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:04.913Z,1509696484.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:05.297Z,1509696485.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:05.312Z,1509696485.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:05.697Z,1509696485.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:05.750Z,1509696485.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:06.086Z,1509696486.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:06.102Z,1509696486.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:06.487Z,1509696486.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:06.503Z,1509696486.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:06.885Z,1509696486.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:06.901Z,1509696486.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:07.285Z,1509696487.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:07.304Z,1509696487.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:07.716Z,1509696487.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:07.765Z,1509696487.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:08.097Z,1509696488.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:08.113Z,1509696488.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:08.498Z,1509696488.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:08.514Z,1509696488.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:08.879Z,1509696488.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:08.970Z,1509696488.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:09.272Z,1509696489.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:09.307Z,1509696489.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:09.678Z,1509696489.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:09.779Z,1509696489.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:10.079Z,1509696490.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:10.114Z,1509696490.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:10.489Z,1509696490.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:10.560Z,1509696490.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:10.889Z,1509696490.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:10.957Z,1509696490.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:11.289Z,1509696491.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:11.319Z,1509696491.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:11.676Z,1509696491.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:11.690Z,1509696491.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:12.087Z,1509696492.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:12.102Z,1509696492.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:12.480Z,1509696492.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:12.495Z,1509696492.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:12.880Z,1509696492.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:12.895Z,1509696492.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:13.280Z,1509696493.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:13.295Z,1509696493.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:13.686Z,1509696493.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:13.701Z,1509696493.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:14.101Z,1509696494.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:14.130Z,1509696494.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:14.498Z,1509696494.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:14.521Z,1509696494.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:14.880Z,1509696494.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:14.895Z,1509696494.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:15.280Z,1509696495.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:15.295Z,1509696495.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:15.680Z,1509696495.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:15.695Z,1509696495.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:16.080Z,1509696496.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:16.099Z,1509696496.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:16.497Z,1509696496.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:16.521Z,1509696496.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:16.893Z,1509696496.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:16.926Z,1509696496.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:17.286Z,1509696497.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:17.301Z,1509696497.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:17.679Z,1509696497.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:17.694Z,1509696497.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:18.080Z,1509696498.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:18.095Z,1509696498.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:18.491Z,1509696498.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:18.525Z,1509696498.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:18.880Z,1509696498.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:18.894Z,1509696498.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:19.280Z,1509696499.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:19.295Z,1509696499.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:19.723Z,1509696499.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:19.778Z,1509696499.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:20.093Z,1509696500.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:20.108Z,1509696500.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:20.490Z,1509696500.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:20.505Z,1509696500.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:20.880Z,1509696500.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:20.895Z,1509696500.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:21.285Z,1509696501.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:21.300Z,1509696501.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:21.697Z,1509696501.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:21.753Z,1509696501.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:22.086Z,1509696502.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:22.101Z,1509696502.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:22.489Z,1509696502.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:22.504Z,1509696502.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:22.889Z,1509696502.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:22.974Z,1509696502.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:23.292Z,1509696503.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:23.315Z,1509696503.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:23.679Z,1509696503.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:23.778Z,1509696503.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:24.076Z,1509696504.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:24.107Z,1509696504.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:24.479Z,1509696504.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:24.547Z,1509696504.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:24.877Z,1509696504.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:24.945Z,1509696504.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:25.276Z,1509696505.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:25.307Z,1509696505.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:25.697Z,1509696505.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:25.712Z,1509696505.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:26.111Z,1509696506.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:26.135Z,1509696506.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:26.499Z,1509696506.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:26.514Z,1509696506.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:26.876Z,1509696506.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:26.891Z,1509696506.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:27.276Z,1509696507.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:27.290Z,1509696507.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:27.678Z,1509696507.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:27.709Z,1509696507.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:28.079Z,1509696508.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:28.119Z,1509696508.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:28.489Z,1509696508.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:28.521Z,1509696508.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:28.889Z,1509696508.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:28.922Z,1509696508.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:29.289Z,1509696509.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:29.321Z,1509696509.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:29.676Z,1509696509.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:29.698Z,1509696509.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:30.076Z,1509696510.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:30.091Z,1509696510.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:30.483Z,1509696510.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:30.523Z,1509696510.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:30.877Z,1509696510.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:30.893Z,1509696510.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:31.283Z,1509696511.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:31.298Z,1509696511.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:31.689Z,1509696511.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:31.722Z,1509696511.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:32.089Z,1509696512.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:32.121Z,1509696512.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:32.493Z,1509696512.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:32.518Z,1509696512.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:32.879Z,1509696512.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:32.899Z,1509696512.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:33.279Z,1509696513.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:33.294Z,1509696513.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:33.686Z,1509696513.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:33.779Z,1509696513.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:34.080Z,1509696514.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:34.096Z,1509696514.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:34.493Z,1509696514.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:34.519Z,1509696514.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:34.893Z,1509696514.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:34.920Z,1509696514.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:35.294Z,1509696515.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:35.318Z,1509696515.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:35.699Z,1509696515.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:35.783Z,1509696515.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:36.081Z,1509696516.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:36.096Z,1509696516.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:36.484Z,1509696516.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:36.499Z,1509696516.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:36.883Z,1509696516.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:36.962Z,1509696516.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:37.280Z,1509696517.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:37.295Z,1509696517.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:37.718Z,1509696517.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:37.780Z,1509696517.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:38.093Z,1509696518.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:38.147Z,1509696518.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:38.493Z,1509696518.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:38.526Z,1509696518.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:38.883Z,1509696518.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:38.942Z,1509696518.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:39.280Z,1509696519.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:39.327Z,1509696519.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:39.684Z,1509696519.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:39.727Z,1509696519.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:40.087Z,1509696520.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:40.107Z,1509696520.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:40.498Z,1509696520.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:40.513Z,1509696520.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:40.901Z,1509696520.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:40.916Z,1509696520.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:41.297Z,1509696521.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:41.312Z,1509696521.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:41.676Z,1509696521.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:41.706Z,1509696521.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:41.706Z,1509696521.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 158
2017-11-03T08:08:41.706Z,1509696521.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:08:41.708Z,1509696521.708 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:41.708Z,1509696521.708 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 158
2017-11-03T08:08:41.708Z,1509696521.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:08:41.710Z,1509696521.710 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:41.710Z,1509696521.710 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 158
2017-11-03T08:08:41.710Z,1509696521.710 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:08:41.785Z,1509696521.785 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:08:41.785Z,1509696521.785 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:08:41.785Z,1509696521.785 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:08:42.097Z,1509696522.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:42.184Z,1509696522.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:08:42.185Z,1509696522.185 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 158
2017-11-03T08:08:42.185Z,1509696522.185 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:08:42.185Z,1509696522.185 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 158
2017-11-03T08:08:42.186Z,1509696522.186 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:08:42.186Z,1509696522.186 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 158
2017-11-03T08:08:42.471Z,1509696522.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:42.502Z,1509696522.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:08:42.502Z,1509696522.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:08:42.502Z,1509696522.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:08:42.503Z,1509696522.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:08:42.503Z,1509696522.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:08:42.503Z,1509696522.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:08:42.504Z,1509696522.504 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:08:42.508Z,1509696522.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:08:42.509Z,1509696522.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:08:42.906Z,1509696522.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:42.921Z,1509696522.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:43.280Z,1509696523.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:43.307Z,1509696523.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:43.698Z,1509696523.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:43.713Z,1509696523.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:44.102Z,1509696524.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:44.119Z,1509696524.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:44.504Z,1509696524.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:44.520Z,1509696524.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:44.877Z,1509696524.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:44.912Z,1509696524.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:45.276Z,1509696525.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:45.308Z,1509696525.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:45.680Z,1509696525.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:45.707Z,1509696525.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:46.079Z,1509696526.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:46.106Z,1509696526.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:46.506Z,1509696526.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:46.522Z,1509696526.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:46.898Z,1509696526.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:46.914Z,1509696526.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:47.298Z,1509696527.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:47.314Z,1509696527.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:47.721Z,1509696527.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:47.779Z,1509696527.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:48.079Z,1509696528.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:48.105Z,1509696528.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:48.476Z,1509696528.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:48.506Z,1509696528.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:48.878Z,1509696528.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:48.904Z,1509696528.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:49.276Z,1509696529.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:49.303Z,1509696529.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:52.646Z,1509696532.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:52.723Z,1509696532.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:52.871Z,1509696532.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:52.887Z,1509696532.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:53.269Z,1509696533.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:53.315Z,1509696533.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:53.664Z,1509696533.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:53.683Z,1509696533.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:54.058Z,1509696534.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:54.119Z,1509696534.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:54.460Z,1509696534.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:54.519Z,1509696534.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:54.866Z,1509696534.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:54.881Z,1509696534.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:55.261Z,1509696535.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:55.275Z,1509696535.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:55.668Z,1509696535.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:55.683Z,1509696535.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:56.085Z,1509696536.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:56.108Z,1509696536.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:56.469Z,1509696536.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:56.490Z,1509696536.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:56.862Z,1509696536.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:56.877Z,1509696536.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:57.260Z,1509696537.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:57.283Z,1509696537.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:57.661Z,1509696537.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:57.676Z,1509696537.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:58.067Z,1509696538.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:58.082Z,1509696538.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:58.468Z,1509696538.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:58.483Z,1509696538.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:58.868Z,1509696538.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:58.886Z,1509696538.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:59.268Z,1509696539.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:59.283Z,1509696539.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:59.662Z,1509696539.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:08:59.677Z,1509696539.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:08:59.880Z,1509696539.880 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:08:59.880Z,1509696539.880 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T08:08:59.880Z,1509696539.880 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:09:00.065Z,1509696540.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:00.079Z,1509696540.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:09:00.080Z,1509696540.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:00.172Z,1509696540.172 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:09:00.285Z,1509696540.285 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:09:00.380Z,1509696540.380 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:09:00.469Z,1509696540.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:00.486Z,1509696540.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:09:00.487Z,1509696540.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:00.862Z,1509696540.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:00.877Z,1509696540.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:09:00.878Z,1509696540.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:01.263Z,1509696541.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:01.282Z,1509696541.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:09:01.283Z,1509696541.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:01.670Z,1509696541.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:01.685Z,1509696541.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:09:01.686Z,1509696541.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:01.784Z,1509696541.784 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:09:01.784Z,1509696541.784 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T08:09:01.996Z,1509696541.996 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:09:01.997Z,1509696541.997 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:09:01.997Z,1509696541.997 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:09:01.997Z,1509696541.997 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:09:02.076Z,1509696542.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:02.103Z,1509696542.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:09:02.109Z,1509696542.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:02.472Z,1509696542.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:02.490Z,1509696542.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:09:02.491Z,1509696542.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:02.865Z,1509696542.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:02.880Z,1509696542.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:09:02.881Z,1509696542.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:03.260Z,1509696543.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:03.275Z,1509696543.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:09:03.276Z,1509696543.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:03.661Z,1509696543.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:03.682Z,1509696543.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:09:03.683Z,1509696543.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:04.061Z,1509696544.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:04.075Z,1509696544.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:09:04.076Z,1509696544.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:04.472Z,1509696544.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:04.487Z,1509696544.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:09:04.488Z,1509696544.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:04.872Z,1509696544.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:04.886Z,1509696544.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:09:04.887Z,1509696544.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:05.270Z,1509696545.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:05.285Z,1509696545.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:09:05.286Z,1509696545.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:05.661Z,1509696545.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:05.676Z,1509696545.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:09:05.677Z,1509696545.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:06.088Z,1509696546.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:06.132Z,1509696546.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:09:06.133Z,1509696546.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:06.241Z,1509696546.241 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:09:06.299Z,1509696546.299 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:09:06.301Z,1509696546.301 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:09:06.301Z,1509696546.301 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:09:06.302Z,1509696546.302 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:09:06.455Z,1509696546.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:06.544Z,1509696546.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T08:09:06.549Z,1509696546.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:06.862Z,1509696546.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:06.899Z,1509696546.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:07.252Z,1509696547.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:07.269Z,1509696547.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:07.666Z,1509696547.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:07.715Z,1509696547.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:08.069Z,1509696548.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:08.094Z,1509696548.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:08.469Z,1509696548.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:08.523Z,1509696548.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:08.855Z,1509696548.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:08.903Z,1509696548.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:09.252Z,1509696549.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:09.267Z,1509696549.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:09.657Z,1509696549.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:09.742Z,1509696549.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:10.057Z,1509696550.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:10.073Z,1509696550.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:10.470Z,1509696550.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:10.493Z,1509696550.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:10.873Z,1509696550.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:10.896Z,1509696550.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:11.270Z,1509696551.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:11.293Z,1509696551.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:11.684Z,1509696551.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:11.752Z,1509696551.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:12.056Z,1509696552.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:12.071Z,1509696552.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:12.462Z,1509696552.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:12.493Z,1509696552.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:12.858Z,1509696552.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:12.873Z,1509696552.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:13.256Z,1509696553.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:13.271Z,1509696553.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:13.735Z,1509696553.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:13.769Z,1509696553.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:14.065Z,1509696554.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:14.100Z,1509696554.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:14.469Z,1509696554.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:14.499Z,1509696554.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:14.859Z,1509696554.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:14.874Z,1509696554.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:15.259Z,1509696555.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:15.279Z,1509696555.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:15.662Z,1509696555.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:15.676Z,1509696555.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:16.055Z,1509696556.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:16.083Z,1509696556.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:16.473Z,1509696556.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:16.488Z,1509696556.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:16.878Z,1509696556.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:16.893Z,1509696556.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:17.274Z,1509696557.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:17.289Z,1509696557.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:17.656Z,1509696557.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:17.681Z,1509696557.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:18.057Z,1509696558.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:18.072Z,1509696558.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:18.453Z,1509696558.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:18.468Z,1509696558.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:18.858Z,1509696558.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:18.873Z,1509696558.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:19.259Z,1509696559.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:19.274Z,1509696559.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:19.670Z,1509696559.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:19.696Z,1509696559.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:20.074Z,1509696560.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:20.097Z,1509696560.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:20.474Z,1509696560.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:20.502Z,1509696560.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:20.858Z,1509696560.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:20.919Z,1509696560.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:21.256Z,1509696561.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:21.275Z,1509696561.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:21.657Z,1509696561.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:21.672Z,1509696561.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:22.062Z,1509696562.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:22.111Z,1509696562.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:22.473Z,1509696562.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:22.496Z,1509696562.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:22.869Z,1509696562.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:22.915Z,1509696562.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:23.269Z,1509696563.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:23.313Z,1509696563.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:23.661Z,1509696563.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:23.676Z,1509696563.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:24.056Z,1509696564.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:24.071Z,1509696564.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:24.460Z,1509696564.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:24.475Z,1509696564.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:24.861Z,1509696564.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:24.876Z,1509696564.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:25.260Z,1509696565.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:25.275Z,1509696565.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:25.670Z,1509696565.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:25.769Z,1509696565.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:26.064Z,1509696566.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:26.079Z,1509696566.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:26.465Z,1509696566.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:26.481Z,1509696566.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:26.860Z,1509696566.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:26.874Z,1509696566.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:27.259Z,1509696567.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:27.275Z,1509696567.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:27.660Z,1509696567.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:27.675Z,1509696567.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:28.061Z,1509696568.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:28.076Z,1509696568.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:28.472Z,1509696568.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:28.487Z,1509696568.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:28.871Z,1509696568.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:28.886Z,1509696568.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:29.270Z,1509696569.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:29.285Z,1509696569.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:29.659Z,1509696569.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:29.674Z,1509696569.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:30.063Z,1509696570.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:30.088Z,1509696570.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:30.453Z,1509696570.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:30.468Z,1509696570.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:30.854Z,1509696570.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:30.885Z,1509696570.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:31.252Z,1509696571.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:31.267Z,1509696571.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:31.669Z,1509696571.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:31.702Z,1509696571.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:32.069Z,1509696572.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:32.093Z,1509696572.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:32.465Z,1509696572.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:32.501Z,1509696572.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:32.859Z,1509696572.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:32.874Z,1509696572.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:33.260Z,1509696573.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:33.299Z,1509696573.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:33.656Z,1509696573.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:33.671Z,1509696573.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:34.059Z,1509696574.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:34.074Z,1509696574.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:34.470Z,1509696574.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:34.501Z,1509696574.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:34.877Z,1509696574.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:34.906Z,1509696574.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:35.273Z,1509696575.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:35.327Z,1509696575.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:35.661Z,1509696575.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:35.707Z,1509696575.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:36.056Z,1509696576.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:36.070Z,1509696576.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:36.463Z,1509696576.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:36.510Z,1509696576.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:36.862Z,1509696576.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:36.877Z,1509696576.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:37.260Z,1509696577.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:37.319Z,1509696577.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:37.668Z,1509696577.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:37.719Z,1509696577.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:38.069Z,1509696578.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:38.084Z,1509696578.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:38.467Z,1509696578.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:38.487Z,1509696578.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:38.862Z,1509696578.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:38.877Z,1509696578.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:39.260Z,1509696579.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:39.275Z,1509696579.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:39.663Z,1509696579.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:39.771Z,1509696579.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:40.051Z,1509696580.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:40.077Z,1509696580.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:40.473Z,1509696580.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:40.488Z,1509696580.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:40.876Z,1509696580.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:40.894Z,1509696580.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:41.268Z,1509696581.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:41.283Z,1509696581.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:41.653Z,1509696581.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:41.746Z,1509696581.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:42.052Z,1509696582.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:42.083Z,1509696582.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:42.452Z,1509696582.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:42.467Z,1509696582.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:42.857Z,1509696582.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:42.872Z,1509696582.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:43.258Z,1509696583.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:43.273Z,1509696583.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:43.673Z,1509696583.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:43.775Z,1509696583.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:44.073Z,1509696584.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:44.103Z,1509696584.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:44.465Z,1509696584.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:44.497Z,1509696584.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:44.858Z,1509696584.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:44.872Z,1509696584.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:45.256Z,1509696585.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:45.271Z,1509696585.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:45.656Z,1509696585.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:45.674Z,1509696585.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:46.061Z,1509696586.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:46.076Z,1509696586.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:46.469Z,1509696586.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:46.494Z,1509696586.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:46.869Z,1509696586.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:46.894Z,1509696586.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:47.269Z,1509696587.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:47.300Z,1509696587.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:47.660Z,1509696587.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:47.675Z,1509696587.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:48.062Z,1509696588.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:48.077Z,1509696588.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:48.093Z,1509696588.093 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T08:09:48.093Z,1509696588.093 [Default:CheckIn:C.Wait] Stopped
2017-11-03T08:09:48.093Z,1509696588.093 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T08:09:48.093Z,1509696588.093 [Default:CheckIn:D] Running Loop=1
2017-11-03T08:09:48.458Z,1509696588.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:48.473Z,1509696588.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:48.476Z,1509696588.476 [Default:CheckIn:D] Stopped
2017-11-03T08:09:48.476Z,1509696588.476 [Default:CheckIn:E] Running Loop=1
2017-11-03T08:09:48.858Z,1509696588.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:48.873Z,1509696588.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 474.681836 min 
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn:E] Stopped
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn] Stopped
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn](INFO): Running loop #47
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn] Running Loop=47
2017-11-03T08:09:48.877Z,1509696588.877 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T08:09:48.878Z,1509696588.878 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T08:09:49.266Z,1509696589.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:49.281Z,1509696589.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:49.674Z,1509696589.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:49.705Z,1509696589.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:52.970Z,1509696592.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:53.046Z,1509696593.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:53.182Z,1509696593.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:53.226Z,1509696593.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:53.576Z,1509696593.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:53.591Z,1509696593.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:53.981Z,1509696593.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:54.030Z,1509696594.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:54.376Z,1509696594.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:54.391Z,1509696594.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:54.790Z,1509696594.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:54.838Z,1509696594.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:55.178Z,1509696595.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:55.193Z,1509696595.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:55.590Z,1509696595.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:55.643Z,1509696595.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:55.974Z,1509696595.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:55.990Z,1509696595.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:56.372Z,1509696596.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:56.387Z,1509696596.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:56.775Z,1509696596.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:56.795Z,1509696596.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:57.175Z,1509696597.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:57.190Z,1509696597.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:57.589Z,1509696597.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:57.619Z,1509696597.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:57.981Z,1509696597.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:57.996Z,1509696597.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:58.389Z,1509696598.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:58.420Z,1509696598.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:58.772Z,1509696598.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:58.787Z,1509696598.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:59.174Z,1509696599.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:59.192Z,1509696599.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:59.573Z,1509696599.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:59.587Z,1509696599.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:09:59.975Z,1509696599.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:09:59.995Z,1509696599.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:00.374Z,1509696600.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:00.399Z,1509696600.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:00.776Z,1509696600.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:00.791Z,1509696600.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:01.189Z,1509696601.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:01.204Z,1509696601.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:01.581Z,1509696601.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:01.597Z,1509696601.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:02.041Z,1509696602.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:02.075Z,1509696602.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:02.378Z,1509696602.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:02.424Z,1509696602.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:02.777Z,1509696602.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:02.803Z,1509696602.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:03.178Z,1509696603.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:03.194Z,1509696603.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:03.582Z,1509696603.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:03.685Z,1509696603.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:03.981Z,1509696603.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:03.997Z,1509696603.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:04.381Z,1509696604.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:04.402Z,1509696604.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:04.777Z,1509696604.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:04.792Z,1509696604.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:05.176Z,1509696605.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:05.191Z,1509696605.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:05.579Z,1509696605.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:05.593Z,1509696605.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:05.978Z,1509696605.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:05.999Z,1509696605.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:06.375Z,1509696606.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:06.390Z,1509696606.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:06.785Z,1509696606.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:06.806Z,1509696606.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:07.182Z,1509696607.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:07.197Z,1509696607.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:07.581Z,1509696607.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:07.642Z,1509696607.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:07.967Z,1509696607.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:08.027Z,1509696608.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:08.371Z,1509696608.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:08.403Z,1509696608.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:08.771Z,1509696608.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:08.803Z,1509696608.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:09.168Z,1509696609.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:09.228Z,1509696609.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:09.581Z,1509696609.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:09.611Z,1509696609.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:09.981Z,1509696609.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:10.050Z,1509696610.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:10.382Z,1509696610.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:10.450Z,1509696610.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:10.768Z,1509696610.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:10.783Z,1509696610.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:11.168Z,1509696611.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:11.183Z,1509696611.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:11.568Z,1509696611.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:11.582Z,1509696611.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:11.984Z,1509696611.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:12.007Z,1509696612.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:12.368Z,1509696612.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:12.383Z,1509696612.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:12.781Z,1509696612.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:12.811Z,1509696612.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:13.181Z,1509696613.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:13.212Z,1509696613.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:13.581Z,1509696613.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:13.612Z,1509696613.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:13.979Z,1509696613.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:13.994Z,1509696613.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:14.372Z,1509696614.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:14.387Z,1509696614.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:14.774Z,1509696614.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:14.789Z,1509696614.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:15.173Z,1509696615.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:15.187Z,1509696615.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:15.586Z,1509696615.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:15.632Z,1509696615.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:16.046Z,1509696616.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:16.066Z,1509696616.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:16.389Z,1509696616.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:16.430Z,1509696616.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:16.776Z,1509696616.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:16.791Z,1509696616.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:17.174Z,1509696617.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:17.193Z,1509696617.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:17.576Z,1509696617.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:17.591Z,1509696617.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:17.974Z,1509696617.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:17.994Z,1509696617.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:18.383Z,1509696618.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:18.403Z,1509696618.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:18.782Z,1509696618.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:18.797Z,1509696618.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:19.182Z,1509696619.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:19.198Z,1509696619.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:19.582Z,1509696619.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:19.597Z,1509696619.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:19.974Z,1509696619.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:19.989Z,1509696619.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:20.375Z,1509696620.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:20.399Z,1509696620.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:20.777Z,1509696620.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:20.793Z,1509696620.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:21.178Z,1509696621.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:21.194Z,1509696621.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:21.582Z,1509696621.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:21.598Z,1509696621.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:21.981Z,1509696621.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:21.997Z,1509696621.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:22.382Z,1509696622.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:22.470Z,1509696622.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:22.774Z,1509696622.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:22.789Z,1509696622.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:23.174Z,1509696623.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:23.194Z,1509696623.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:23.581Z,1509696623.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:23.641Z,1509696623.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:23.968Z,1509696623.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:23.998Z,1509696623.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:24.379Z,1509696624.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:24.437Z,1509696624.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:24.791Z,1509696624.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:24.838Z,1509696624.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:25.186Z,1509696625.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:25.201Z,1509696625.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:25.590Z,1509696625.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:25.607Z,1509696625.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:25.982Z,1509696625.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:25.997Z,1509696625.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:26.379Z,1509696626.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:26.399Z,1509696626.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:26.777Z,1509696626.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:26.799Z,1509696626.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:27.179Z,1509696627.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:27.194Z,1509696627.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:27.579Z,1509696627.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:27.599Z,1509696627.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:27.989Z,1509696627.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:28.005Z,1509696628.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:28.389Z,1509696628.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:28.405Z,1509696628.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:28.779Z,1509696628.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:28.799Z,1509696628.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:29.178Z,1509696629.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:29.193Z,1509696629.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:29.579Z,1509696629.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:29.593Z,1509696629.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:30.038Z,1509696630.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:30.061Z,1509696630.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:30.377Z,1509696630.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:30.418Z,1509696630.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:30.790Z,1509696630.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:30.817Z,1509696630.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:31.186Z,1509696631.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:31.201Z,1509696631.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:31.590Z,1509696631.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:31.605Z,1509696631.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:31.980Z,1509696631.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:31.995Z,1509696631.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:32.363Z,1509696632.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:32.389Z,1509696632.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:32.778Z,1509696632.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:32.793Z,1509696632.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:33.178Z,1509696633.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:33.194Z,1509696633.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:33.589Z,1509696633.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:33.606Z,1509696633.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:33.992Z,1509696633.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:34.007Z,1509696634.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:34.394Z,1509696634.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:34.409Z,1509696634.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:34.779Z,1509696634.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:34.799Z,1509696634.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:35.176Z,1509696635.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:35.203Z,1509696635.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:35.580Z,1509696635.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:35.595Z,1509696635.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:35.968Z,1509696635.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:35.993Z,1509696635.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:36.378Z,1509696636.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:36.399Z,1509696636.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:36.809Z,1509696636.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:36.920Z,1509696636.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:37.185Z,1509696637.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:37.219Z,1509696637.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:37.589Z,1509696637.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:37.611Z,1509696637.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:37.984Z,1509696637.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:38.038Z,1509696638.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:38.379Z,1509696638.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:38.399Z,1509696638.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:38.777Z,1509696638.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:38.831Z,1509696638.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:39.177Z,1509696639.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:39.235Z,1509696639.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:39.583Z,1509696639.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:39.603Z,1509696639.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:39.987Z,1509696639.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:40.010Z,1509696640.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:40.390Z,1509696640.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:40.405Z,1509696640.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:40.771Z,1509696640.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:40.796Z,1509696640.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:41.171Z,1509696641.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:41.197Z,1509696641.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:41.569Z,1509696641.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:41.598Z,1509696641.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:41.968Z,1509696641.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:41.997Z,1509696641.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:42.371Z,1509696642.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:42.396Z,1509696642.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:42.786Z,1509696642.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:42.801Z,1509696642.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:43.187Z,1509696643.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:43.202Z,1509696643.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:43.581Z,1509696643.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:43.615Z,1509696643.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:44.019Z,1509696644.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:44.060Z,1509696644.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:44.368Z,1509696644.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:44.383Z,1509696644.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:44.772Z,1509696644.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:44.787Z,1509696644.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:45.167Z,1509696645.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:45.182Z,1509696645.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:45.581Z,1509696645.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:45.613Z,1509696645.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:45.985Z,1509696645.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:46.010Z,1509696646.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:46.400Z,1509696646.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:46.420Z,1509696646.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:46.772Z,1509696646.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:46.791Z,1509696646.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:47.175Z,1509696647.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:47.211Z,1509696647.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:47.575Z,1509696647.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:47.591Z,1509696647.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:47.972Z,1509696647.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:47.995Z,1509696647.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:48.375Z,1509696648.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:48.395Z,1509696648.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:48.789Z,1509696648.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:48.813Z,1509696648.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:49.186Z,1509696649.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:49.218Z,1509696649.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:49.585Z,1509696649.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:49.617Z,1509696649.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:49.977Z,1509696649.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:49.991Z,1509696649.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:53.174Z,1509696653.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:53.258Z,1509696653.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:53.405Z,1509696653.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:53.452Z,1509696653.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:53.814Z,1509696653.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:53.843Z,1509696653.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:54.201Z,1509696654.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:54.247Z,1509696654.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:54.596Z,1509696654.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:54.611Z,1509696654.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:54.993Z,1509696654.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:55.039Z,1509696655.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:55.392Z,1509696655.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:55.443Z,1509696655.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:55.831Z,1509696655.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:55.877Z,1509696655.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:56.185Z,1509696656.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:56.216Z,1509696656.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:56.594Z,1509696656.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:56.619Z,1509696656.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:56.997Z,1509696656.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:57.024Z,1509696657.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:57.397Z,1509696657.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:57.423Z,1509696657.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:57.788Z,1509696657.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:57.819Z,1509696657.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:58.183Z,1509696658.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:58.203Z,1509696658.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:58.586Z,1509696658.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:58.601Z,1509696658.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:58.984Z,1509696658.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:58.999Z,1509696658.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:59.397Z,1509696659.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:59.424Z,1509696659.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:10:59.797Z,1509696659.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:10:59.825Z,1509696659.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:00.197Z,1509696660.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:00.295Z,1509696660.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:00.593Z,1509696660.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:00.608Z,1509696660.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:00.993Z,1509696660.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:01.008Z,1509696661.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:01.400Z,1509696661.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:01.415Z,1509696661.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:01.802Z,1509696661.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:01.823Z,1509696661.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:02.204Z,1509696662.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:02.290Z,1509696662.290 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:11:02.290Z,1509696662.290 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T08:11:02.290Z,1509696662.290 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:11:02.362Z,1509696662.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T08:11:02.363Z,1509696662.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:02.469Z,1509696662.469 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:11:02.586Z,1509696662.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:02.601Z,1509696662.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:11:02.602Z,1509696662.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:02.697Z,1509696662.697 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:11:02.866Z,1509696662.866 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:11:02.996Z,1509696662.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:03.012Z,1509696663.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:11:03.013Z,1509696663.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:03.403Z,1509696663.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:03.423Z,1509696663.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:11:03.424Z,1509696663.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:03.806Z,1509696663.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:03.825Z,1509696663.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:11:03.826Z,1509696663.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:04.202Z,1509696664.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:04.229Z,1509696664.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:11:04.230Z,1509696664.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:04.329Z,1509696664.329 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:11:04.329Z,1509696664.329 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T08:11:04.481Z,1509696664.481 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:11:04.481Z,1509696664.481 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:11:04.481Z,1509696664.481 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:11:04.481Z,1509696664.481 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:11:04.586Z,1509696664.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:04.657Z,1509696664.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:11:04.658Z,1509696664.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:04.985Z,1509696664.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:05.031Z,1509696665.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:11:05.032Z,1509696665.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:05.422Z,1509696665.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:05.462Z,1509696665.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:11:05.463Z,1509696665.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:05.807Z,1509696665.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:05.822Z,1509696665.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:11:05.823Z,1509696665.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:06.218Z,1509696666.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:06.238Z,1509696666.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:11:06.239Z,1509696666.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:06.588Z,1509696666.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:06.596Z,1509696666.596 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:11:06.596Z,1509696666.596 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:11:06.633Z,1509696666.633 [BPC1](ERROR): Data Fault
2017-11-03T08:11:06.686Z,1509696666.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T08:11:06.687Z,1509696666.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:06.793Z,1509696666.793 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:11:06.994Z,1509696666.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:07.037Z,1509696667.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:11:07.038Z,1509696667.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:07.403Z,1509696667.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:07.435Z,1509696667.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:11:07.436Z,1509696667.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:07.807Z,1509696667.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:07.835Z,1509696667.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:11:07.835Z,1509696667.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:07.929Z,1509696667.929 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:11:07.929Z,1509696667.929 [BPC1] No Fault, FailCount= 1
2017-11-03T08:11:08.207Z,1509696668.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:08.303Z,1509696668.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T08:11:08.304Z,1509696668.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:08.593Z,1509696668.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:08.691Z,1509696668.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T08:11:08.692Z,1509696668.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:08.829Z,1509696668.829 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:11:08.921Z,1509696668.921 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:11:08.922Z,1509696668.922 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:11:08.922Z,1509696668.922 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:11:08.923Z,1509696668.923 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:11:09.039Z,1509696669.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:09.131Z,1509696669.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T08:11:09.141Z,1509696669.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:09.409Z,1509696669.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:09.447Z,1509696669.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:09.834Z,1509696669.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:09.862Z,1509696669.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:10.212Z,1509696670.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:10.261Z,1509696670.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:10.594Z,1509696670.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:10.655Z,1509696670.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:10.991Z,1509696670.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:11.037Z,1509696671.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:11.433Z,1509696671.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:11.457Z,1509696671.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:11.800Z,1509696671.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:11.839Z,1509696671.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:12.196Z,1509696672.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:12.239Z,1509696672.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:12.592Z,1509696672.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:12.616Z,1509696672.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:12.987Z,1509696672.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:13.025Z,1509696673.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:13.396Z,1509696673.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:13.415Z,1509696673.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:13.806Z,1509696673.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:13.825Z,1509696673.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:14.206Z,1509696674.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:14.250Z,1509696674.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:14.594Z,1509696674.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:14.625Z,1509696674.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:15.001Z,1509696675.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:15.029Z,1509696675.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:15.415Z,1509696675.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:15.443Z,1509696675.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:15.808Z,1509696675.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:15.827Z,1509696675.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:16.216Z,1509696676.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:16.235Z,1509696676.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:16.619Z,1509696676.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:16.669Z,1509696676.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:16.990Z,1509696676.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:17.024Z,1509696677.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:17.413Z,1509696677.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:17.440Z,1509696677.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:17.813Z,1509696677.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:17.830Z,1509696677.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:18.213Z,1509696678.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:18.272Z,1509696678.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:18.594Z,1509696678.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:18.639Z,1509696678.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:19.008Z,1509696679.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:19.031Z,1509696679.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:19.414Z,1509696679.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:19.430Z,1509696679.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:19.805Z,1509696679.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:19.821Z,1509696679.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:20.207Z,1509696680.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:20.222Z,1509696680.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:20.615Z,1509696680.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:20.631Z,1509696680.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:20.987Z,1509696680.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:21.047Z,1509696681.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:21.397Z,1509696681.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:21.413Z,1509696681.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:21.809Z,1509696681.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:21.863Z,1509696681.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:22.201Z,1509696682.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:22.232Z,1509696682.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:22.590Z,1509696682.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:22.654Z,1509696682.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:23.037Z,1509696683.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:23.087Z,1509696683.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:23.402Z,1509696683.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:23.432Z,1509696683.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:23.802Z,1509696683.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:23.833Z,1509696683.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:24.203Z,1509696684.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:24.233Z,1509696684.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:24.590Z,1509696684.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:24.606Z,1509696684.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:24.989Z,1509696684.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:25.005Z,1509696685.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:25.394Z,1509696685.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:25.410Z,1509696685.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:25.802Z,1509696685.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:25.831Z,1509696685.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:26.201Z,1509696686.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:26.232Z,1509696686.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:26.594Z,1509696686.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:26.634Z,1509696686.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:26.989Z,1509696686.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:27.004Z,1509696687.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:27.420Z,1509696687.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:27.436Z,1509696687.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:27.802Z,1509696687.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:27.832Z,1509696687.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:28.224Z,1509696688.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:28.301Z,1509696688.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:28.589Z,1509696688.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:28.604Z,1509696688.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:28.992Z,1509696688.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:29.007Z,1509696689.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:29.401Z,1509696689.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:29.432Z,1509696689.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:29.801Z,1509696689.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:29.832Z,1509696689.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:30.202Z,1509696690.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:30.237Z,1509696690.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:30.589Z,1509696690.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:30.604Z,1509696690.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:30.991Z,1509696690.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:31.014Z,1509696691.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:31.402Z,1509696691.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:31.433Z,1509696691.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:31.802Z,1509696691.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:31.834Z,1509696691.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:32.201Z,1509696692.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:32.234Z,1509696692.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:32.590Z,1509696692.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:32.605Z,1509696692.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:32.992Z,1509696692.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:33.011Z,1509696693.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:33.401Z,1509696693.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:33.431Z,1509696693.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:33.802Z,1509696693.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:33.830Z,1509696693.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:34.201Z,1509696694.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:34.231Z,1509696694.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:34.589Z,1509696694.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:34.654Z,1509696694.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:34.992Z,1509696694.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:35.046Z,1509696695.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:35.394Z,1509696695.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:35.431Z,1509696695.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:35.805Z,1509696695.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:35.834Z,1509696695.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:36.206Z,1509696696.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:36.283Z,1509696696.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:36.592Z,1509696696.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:36.631Z,1509696696.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:37.034Z,1509696697.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:37.065Z,1509696697.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:37.398Z,1509696697.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:37.443Z,1509696697.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:37.801Z,1509696697.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:37.839Z,1509696697.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:38.197Z,1509696698.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:38.215Z,1509696698.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:38.593Z,1509696698.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:38.608Z,1509696698.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:38.993Z,1509696698.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:39.009Z,1509696699.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:39.397Z,1509696699.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:39.418Z,1509696699.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:39.802Z,1509696699.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:39.838Z,1509696699.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:40.198Z,1509696700.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:40.213Z,1509696700.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:40.593Z,1509696700.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:40.607Z,1509696700.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:40.994Z,1509696700.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:41.009Z,1509696701.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:41.396Z,1509696701.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:41.411Z,1509696701.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:41.802Z,1509696701.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:41.816Z,1509696701.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:42.198Z,1509696702.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:42.213Z,1509696702.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:42.593Z,1509696702.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:42.607Z,1509696702.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:42.607Z,1509696702.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 159
2017-11-03T08:11:42.607Z,1509696702.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:11:42.609Z,1509696702.609 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:42.609Z,1509696702.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 159
2017-11-03T08:11:42.609Z,1509696702.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:11:42.611Z,1509696702.611 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:42.611Z,1509696702.611 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 159
2017-11-03T08:11:42.611Z,1509696702.611 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:11:42.689Z,1509696702.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:11:42.689Z,1509696702.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:11:42.690Z,1509696702.690 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:11:42.991Z,1509696702.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:43.092Z,1509696703.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:11:43.093Z,1509696703.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 159
2017-11-03T08:11:43.093Z,1509696703.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:11:43.093Z,1509696703.093 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 159
2017-11-03T08:11:43.094Z,1509696703.094 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:11:43.094Z,1509696703.094 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 159
2017-11-03T08:11:43.400Z,1509696703.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:43.414Z,1509696703.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:11:43.414Z,1509696703.414 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:11:43.415Z,1509696703.415 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:11:43.415Z,1509696703.415 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:11:43.415Z,1509696703.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:11:43.416Z,1509696703.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:11:43.416Z,1509696703.416 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:11:43.417Z,1509696703.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:11:43.417Z,1509696703.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:11:43.805Z,1509696703.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:43.819Z,1509696703.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:44.206Z,1509696704.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:44.226Z,1509696704.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:44.593Z,1509696704.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:44.614Z,1509696704.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:44.983Z,1509696704.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:45.009Z,1509696705.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:45.405Z,1509696705.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:45.420Z,1509696705.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:45.808Z,1509696705.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:45.823Z,1509696705.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:46.205Z,1509696706.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:46.219Z,1509696706.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:46.594Z,1509696706.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:46.609Z,1509696706.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:47.003Z,1509696707.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:47.023Z,1509696707.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:47.405Z,1509696707.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:47.420Z,1509696707.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:47.806Z,1509696707.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:47.821Z,1509696707.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:48.205Z,1509696708.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:48.220Z,1509696708.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:48.595Z,1509696708.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:48.610Z,1509696708.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:48.000Z,1509696709.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:49.031Z,1509696709.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:49.401Z,1509696709.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:49.433Z,1509696709.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:49.801Z,1509696709.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:49.850Z,1509696709.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:50.202Z,1509696710.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:50.251Z,1509696710.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:53.453Z,1509696713.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:53.475Z,1509696713.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:53.618Z,1509696713.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:53.646Z,1509696713.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:54.029Z,1509696714.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:54.094Z,1509696714.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:54.443Z,1509696714.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:54.461Z,1509696714.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:54.831Z,1509696714.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:54.892Z,1509696714.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:55.251Z,1509696715.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:55.313Z,1509696715.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:55.624Z,1509696715.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:55.679Z,1509696715.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:55.769Z,1509696715.769 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T08:11:56.023Z,1509696716.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:56.042Z,1509696716.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:56.438Z,1509696716.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:56.467Z,1509696716.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:56.841Z,1509696716.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:56.871Z,1509696716.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:57.235Z,1509696717.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:57.263Z,1509696717.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:57.620Z,1509696717.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:57.667Z,1509696717.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:58.017Z,1509696718.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:58.026Z,1509696718.026 [PNI_TCM](ERROR): CRC does not match. Expected:0x11679 got:0x39377
2017-11-03T08:11:58.070Z,1509696718.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:58.437Z,1509696718.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:58.466Z,1509696718.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:58.854Z,1509696718.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:58.869Z,1509696718.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:59.236Z,1509696719.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:59.264Z,1509696719.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:11:59.626Z,1509696719.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:11:59.640Z,1509696719.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:00.022Z,1509696720.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:00.037Z,1509696720.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:00.429Z,1509696720.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:00.467Z,1509696720.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:00.855Z,1509696720.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:00.862Z,1509696720.862 [PNI_TCM](ERROR): CRC does not match. Expected:0x38741 got:0x6593
2017-11-03T08:12:00.886Z,1509696720.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:01.232Z,1509696721.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:01.265Z,1509696721.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:01.627Z,1509696721.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:01.666Z,1509696721.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:02.019Z,1509696722.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:02.059Z,1509696722.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:02.440Z,1509696722.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:02.465Z,1509696722.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:02.854Z,1509696722.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:02.879Z,1509696722.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:03.238Z,1509696723.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:03.262Z,1509696723.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:03.624Z,1509696723.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:03.667Z,1509696723.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:04.023Z,1509696724.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:04.043Z,1509696724.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:04.435Z,1509696724.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:04.464Z,1509696724.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:04.922Z,1509696724.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:05.015Z,1509696725.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:05.235Z,1509696725.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:05.260Z,1509696725.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:05.620Z,1509696725.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:05.666Z,1509696725.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:06.023Z,1509696726.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:06.029Z,1509696726.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x46163 got:0x39379
2017-11-03T08:12:06.066Z,1509696726.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:06.434Z,1509696726.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:06.462Z,1509696726.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:06.834Z,1509696726.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:06.864Z,1509696726.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:07.264Z,1509696727.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:07.275Z,1509696727.275 [PNI_TCM](ERROR): CRC does not match. Expected:0x33679 got:0x7489
2017-11-03T08:12:07.319Z,1509696727.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:07.623Z,1509696727.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:07.643Z,1509696727.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:08.022Z,1509696728.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:08.098Z,1509696728.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:08.433Z,1509696728.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:08.474Z,1509696728.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:08.834Z,1509696728.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:08.840Z,1509696728.840 [PNI_TCM](ERROR): CRC does not match. Expected:0x54864 got:0x7489
2017-11-03T08:12:08.891Z,1509696728.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:09.277Z,1509696729.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:09.316Z,1509696729.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:09.622Z,1509696729.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:09.684Z,1509696729.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:10.019Z,1509696730.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:10.067Z,1509696730.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:10.419Z,1509696730.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:10.440Z,1509696730.440 [PNI_TCM](ERROR): CRC does not match. Expected:0x16409 got:0x6593
2017-11-03T08:12:10.491Z,1509696730.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:10.835Z,1509696730.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:10.855Z,1509696730.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:11.219Z,1509696731.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:11.245Z,1509696731.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:11.640Z,1509696731.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:11.656Z,1509696731.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:12.042Z,1509696732.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:12.057Z,1509696732.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:12.439Z,1509696732.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:12.459Z,1509696732.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:12.817Z,1509696732.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:12.845Z,1509696732.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:13.217Z,1509696733.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:13.248Z,1509696733.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:13.620Z,1509696733.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:13.650Z,1509696733.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:14.018Z,1509696734.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:14.046Z,1509696734.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:14.442Z,1509696734.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:14.457Z,1509696734.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:14.848Z,1509696734.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:14.863Z,1509696734.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:15.241Z,1509696735.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:15.256Z,1509696735.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:15.623Z,1509696735.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:15.649Z,1509696735.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:16.015Z,1509696736.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:16.045Z,1509696736.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:16.437Z,1509696736.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:16.459Z,1509696736.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:16.852Z,1509696736.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:16.879Z,1509696736.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:17.240Z,1509696737.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:17.263Z,1509696737.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:17.628Z,1509696737.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:17.652Z,1509696737.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:18.014Z,1509696738.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:18.063Z,1509696738.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:18.440Z,1509696738.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:18.455Z,1509696738.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:18.838Z,1509696738.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:18.853Z,1509696738.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:19.255Z,1509696739.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:19.275Z,1509696739.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:19.615Z,1509696739.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:19.659Z,1509696739.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:20.026Z,1509696740.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:20.052Z,1509696740.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:20.423Z,1509696740.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:20.457Z,1509696740.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:20.823Z,1509696740.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:20.853Z,1509696740.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:21.241Z,1509696741.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:21.323Z,1509696741.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:21.648Z,1509696741.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:21.663Z,1509696741.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:22.046Z,1509696742.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:22.067Z,1509696742.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:22.430Z,1509696742.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:22.503Z,1509696742.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:22.823Z,1509696742.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:22.867Z,1509696742.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:23.256Z,1509696743.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:23.334Z,1509696743.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:23.619Z,1509696743.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:23.635Z,1509696743.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:24.026Z,1509696744.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:24.079Z,1509696744.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:24.429Z,1509696744.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:24.504Z,1509696744.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:24.855Z,1509696744.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:24.863Z,1509696744.863 [PNI_TCM](ERROR): CRC does not match. Expected:0x62198 got:0x6593
2017-11-03T08:12:24.891Z,1509696744.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:25.235Z,1509696745.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:25.267Z,1509696745.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:25.620Z,1509696745.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:25.635Z,1509696745.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:26.021Z,1509696746.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:26.066Z,1509696746.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:26.436Z,1509696746.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:26.460Z,1509696746.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:26.855Z,1509696746.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:26.870Z,1509696746.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:27.233Z,1509696747.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:27.257Z,1509696747.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:27.624Z,1509696747.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:27.662Z,1509696747.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:28.017Z,1509696748.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:28.037Z,1509696748.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:28.439Z,1509696748.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:28.471Z,1509696748.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:28.859Z,1509696748.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:28.879Z,1509696748.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:29.230Z,1509696749.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:29.266Z,1509696749.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:29.621Z,1509696749.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:29.631Z,1509696749.631 [PNI_TCM](ERROR): CRC does not match. Expected:0x52729 got:0x6593
2017-11-03T08:12:29.667Z,1509696749.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:30.019Z,1509696750.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:30.027Z,1509696750.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x13677 got:0x53958
2017-11-03T08:12:30.062Z,1509696750.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:30.434Z,1509696750.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:30.458Z,1509696750.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:30.858Z,1509696750.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:30.876Z,1509696750.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:31.237Z,1509696751.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:31.266Z,1509696751.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:31.619Z,1509696751.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:31.636Z,1509696751.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:32.024Z,1509696752.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:32.039Z,1509696752.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:32.429Z,1509696752.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:32.459Z,1509696752.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:32.833Z,1509696752.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:32.840Z,1509696752.840 [PNI_TCM](ERROR): CRC does not match. Expected:0x37585 got:0x6593
2017-11-03T08:12:32.865Z,1509696752.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:33.247Z,1509696753.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:33.262Z,1509696753.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:33.627Z,1509696753.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:33.662Z,1509696753.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:34.016Z,1509696754.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:34.062Z,1509696754.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:34.436Z,1509696754.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:34.459Z,1509696754.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:34.838Z,1509696754.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:34.866Z,1509696754.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:35.250Z,1509696755.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:35.304Z,1509696755.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:35.625Z,1509696755.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:35.664Z,1509696755.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:36.025Z,1509696756.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:36.043Z,1509696756.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:36.438Z,1509696756.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:36.530Z,1509696756.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:36.831Z,1509696756.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:36.851Z,1509696756.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:37.260Z,1509696757.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:37.319Z,1509696757.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:37.627Z,1509696757.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:37.670Z,1509696757.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:38.028Z,1509696758.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:38.035Z,1509696758.035 [PNI_TCM](ERROR): CRC does not match. Expected:0x64136 got:0x16384
2017-11-03T08:12:38.086Z,1509696758.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:38.433Z,1509696758.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:38.478Z,1509696758.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:38.829Z,1509696758.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:38.871Z,1509696758.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:39.233Z,1509696759.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:39.239Z,1509696759.239 [PNI_TCM](ERROR): CRC does not match. Expected:0x22466 got:0x6593
2017-11-03T08:12:39.278Z,1509696759.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:39.630Z,1509696759.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:39.645Z,1509696759.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:40.031Z,1509696760.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:40.051Z,1509696760.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:40.430Z,1509696760.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:40.470Z,1509696760.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:40.836Z,1509696760.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:40.843Z,1509696760.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x19528 got:0x6593
2017-11-03T08:12:40.875Z,1509696760.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:41.232Z,1509696761.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:41.251Z,1509696761.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:41.631Z,1509696761.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:41.646Z,1509696761.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:42.027Z,1509696762.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:42.068Z,1509696762.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:42.433Z,1509696762.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:42.448Z,1509696762.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:42.832Z,1509696762.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:42.847Z,1509696762.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:43.234Z,1509696763.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:43.249Z,1509696763.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:43.625Z,1509696763.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:43.663Z,1509696763.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:44.027Z,1509696764.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:44.045Z,1509696764.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:44.435Z,1509696764.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:44.450Z,1509696764.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:44.849Z,1509696764.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:44.882Z,1509696764.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:45.229Z,1509696765.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:45.269Z,1509696765.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:45.628Z,1509696765.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:45.645Z,1509696765.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:46.023Z,1509696766.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:46.039Z,1509696766.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:46.432Z,1509696766.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:46.447Z,1509696766.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:46.835Z,1509696766.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:46.869Z,1509696766.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:47.233Z,1509696767.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:47.248Z,1509696767.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:47.630Z,1509696767.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:47.645Z,1509696767.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:48.031Z,1509696768.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:48.046Z,1509696768.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:48.430Z,1509696768.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:48.471Z,1509696768.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:48.833Z,1509696768.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:48.839Z,1509696768.839 [PNI_TCM](ERROR): CRC does not match. Expected:0x24239 got:0x6593
2017-11-03T08:12:48.878Z,1509696768.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:49.243Z,1509696769.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:49.292Z,1509696769.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:49.629Z,1509696769.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:49.644Z,1509696769.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:50.025Z,1509696770.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:50.064Z,1509696770.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:50.436Z,1509696770.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:50.515Z,1509696770.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:53.738Z,1509696773.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:53.753Z,1509696773.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:53.912Z,1509696773.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:53.947Z,1509696773.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:54.290Z,1509696774.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:54.339Z,1509696774.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:54.752Z,1509696774.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:54.801Z,1509696774.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:55.089Z,1509696775.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:55.143Z,1509696775.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:55.510Z,1509696775.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:55.568Z,1509696775.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:55.916Z,1509696775.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:55.931Z,1509696775.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:56.312Z,1509696776.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:56.335Z,1509696776.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:56.707Z,1509696776.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:56.797Z,1509696776.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:57.095Z,1509696777.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:57.111Z,1509696777.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:57.494Z,1509696777.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:57.509Z,1509696777.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:57.896Z,1509696777.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:57.911Z,1509696777.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:58.292Z,1509696778.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:58.307Z,1509696778.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:58.697Z,1509696778.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:58.713Z,1509696778.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:59.109Z,1509696779.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:59.130Z,1509696779.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:59.503Z,1509696779.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:59.523Z,1509696779.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:12:59.888Z,1509696779.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:12:59.914Z,1509696779.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:00.284Z,1509696780.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:00.314Z,1509696780.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:00.686Z,1509696780.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:00.711Z,1509696780.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:01.087Z,1509696781.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:01.112Z,1509696781.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:01.505Z,1509696781.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:01.520Z,1509696781.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:01.913Z,1509696781.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:01.928Z,1509696781.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:02.309Z,1509696782.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:02.331Z,1509696782.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:02.691Z,1509696782.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:02.717Z,1509696782.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:03.085Z,1509696783.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:03.114Z,1509696783.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:03.507Z,1509696783.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:03.527Z,1509696783.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:03.892Z,1509696783.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:03.919Z,1509696783.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:04.288Z,1509696784.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:04.314Z,1509696784.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:04.709Z,1509696784.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:04.731Z,1509696784.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:04.880Z,1509696784.880 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:13:04.880Z,1509696784.880 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T08:13:04.880Z,1509696784.880 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:13:05.105Z,1509696785.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:05.120Z,1509696785.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:13:05.121Z,1509696785.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:05.254Z,1509696785.254 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:13:05.285Z,1509696785.285 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:13:05.399Z,1509696785.399 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:13:05.517Z,1509696785.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:05.533Z,1509696785.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:13:05.534Z,1509696785.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:05.889Z,1509696785.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:05.923Z,1509696785.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:13:05.924Z,1509696785.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:06.285Z,1509696786.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:06.314Z,1509696786.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:13:06.315Z,1509696786.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:06.690Z,1509696786.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:06.709Z,1509696786.709 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:13:06.709Z,1509696786.709 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:13:06.709Z,1509696786.709 [BPC1](ERROR): Data Fault
2017-11-03T08:13:06.719Z,1509696786.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:13:06.720Z,1509696786.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:06.801Z,1509696786.801 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:13:06.801Z,1509696786.801 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T08:13:06.801Z,1509696786.801 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:13:07.012Z,1509696787.012 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:13:07.013Z,1509696787.013 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:13:07.013Z,1509696787.013 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:13:07.013Z,1509696787.013 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:13:07.092Z,1509696787.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:07.115Z,1509696787.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:13:07.116Z,1509696787.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:07.514Z,1509696787.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:07.528Z,1509696787.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:13:07.529Z,1509696787.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:07.913Z,1509696787.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:07.934Z,1509696787.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:13:07.935Z,1509696787.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:08.017Z,1509696788.017 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:13:08.017Z,1509696788.017 [BPC1] No Fault, FailCount= 1
2017-11-03T08:13:08.309Z,1509696788.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:08.382Z,1509696788.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-03T08:13:08.383Z,1509696788.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:08.691Z,1509696788.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:08.735Z,1509696788.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:13:08.736Z,1509696788.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:09.089Z,1509696789.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:09.124Z,1509696789.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:13:09.125Z,1509696789.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:09.488Z,1509696789.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:09.503Z,1509696789.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:13:09.524Z,1509696789.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:09.888Z,1509696789.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:09.902Z,1509696789.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:13:09.903Z,1509696789.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:10.289Z,1509696790.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:10.304Z,1509696790.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:13:10.305Z,1509696790.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:10.716Z,1509696790.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:10.738Z,1509696790.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:13:10.739Z,1509696790.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:11.139Z,1509696791.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:11.191Z,1509696791.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T08:13:11.192Z,1509696791.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:11.234Z,1509696791.234 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:13:11.318Z,1509696791.318 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:13:11.319Z,1509696791.319 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:13:11.320Z,1509696791.320 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:13:11.321Z,1509696791.321 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:13:11.507Z,1509696791.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:11.533Z,1509696791.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:13:11.534Z,1509696791.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:11.891Z,1509696791.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:11.914Z,1509696791.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:12.303Z,1509696792.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:12.319Z,1509696792.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:12.698Z,1509696792.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:12.713Z,1509696792.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:13.096Z,1509696793.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:13.112Z,1509696793.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:13.506Z,1509696793.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:13.521Z,1509696793.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:13.904Z,1509696793.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:13.966Z,1509696793.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:14.304Z,1509696794.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:14.319Z,1509696794.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:14.744Z,1509696794.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:14.804Z,1509696794.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:15.096Z,1509696795.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:15.119Z,1509696795.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:15.496Z,1509696795.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:15.511Z,1509696795.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:15.898Z,1509696795.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:15.913Z,1509696795.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:16.299Z,1509696796.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:16.319Z,1509696796.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:16.746Z,1509696796.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:16.775Z,1509696796.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:17.109Z,1509696797.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:17.125Z,1509696797.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:17.508Z,1509696797.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:17.524Z,1509696797.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:17.888Z,1509696797.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:17.919Z,1509696797.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:18.291Z,1509696798.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:18.322Z,1509696798.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:18.711Z,1509696798.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:18.765Z,1509696798.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:19.088Z,1509696799.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:19.118Z,1509696799.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:19.510Z,1509696799.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:19.525Z,1509696799.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:19.913Z,1509696799.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:19.929Z,1509696799.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:20.308Z,1509696800.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:20.331Z,1509696800.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:20.683Z,1509696800.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:20.783Z,1509696800.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:21.087Z,1509696801.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:21.114Z,1509696801.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:21.491Z,1509696801.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:21.543Z,1509696801.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:21.891Z,1509696801.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:21.928Z,1509696801.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:22.288Z,1509696802.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:22.343Z,1509696802.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:22.702Z,1509696802.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:22.801Z,1509696802.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:23.101Z,1509696803.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:23.135Z,1509696803.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:23.502Z,1509696803.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:23.535Z,1509696803.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:23.891Z,1509696803.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:23.927Z,1509696803.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:24.285Z,1509696804.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:24.329Z,1509696804.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:24.691Z,1509696804.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:24.726Z,1509696804.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:25.095Z,1509696805.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:25.126Z,1509696805.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:25.501Z,1509696805.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:25.534Z,1509696805.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:25.914Z,1509696805.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:25.935Z,1509696805.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:26.303Z,1509696806.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:26.335Z,1509696806.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:26.690Z,1509696806.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:26.729Z,1509696806.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:27.091Z,1509696807.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:27.126Z,1509696807.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:27.495Z,1509696807.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:27.535Z,1509696807.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:27.890Z,1509696807.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:27.926Z,1509696807.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:28.291Z,1509696808.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:28.307Z,1509696808.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:28.705Z,1509696808.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:28.732Z,1509696808.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:29.101Z,1509696809.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:29.138Z,1509696809.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:29.506Z,1509696809.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:29.532Z,1509696809.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:29.895Z,1509696809.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:29.937Z,1509696809.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:30.287Z,1509696810.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:30.303Z,1509696810.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:30.758Z,1509696810.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:30.798Z,1509696810.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:31.088Z,1509696811.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:31.111Z,1509696811.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:31.506Z,1509696811.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:31.539Z,1509696811.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:31.901Z,1509696811.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:31.937Z,1509696811.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:32.306Z,1509696812.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:32.338Z,1509696812.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:32.744Z,1509696812.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:32.794Z,1509696812.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:33.095Z,1509696813.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:33.155Z,1509696813.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:33.491Z,1509696813.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:33.507Z,1509696813.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:33.896Z,1509696813.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:33.918Z,1509696813.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:34.292Z,1509696814.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:34.307Z,1509696814.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:34.739Z,1509696814.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:34.852Z,1509696814.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:35.105Z,1509696815.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:35.140Z,1509696815.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:35.509Z,1509696815.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:35.559Z,1509696815.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:35.896Z,1509696815.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:35.915Z,1509696815.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:36.293Z,1509696816.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:36.335Z,1509696816.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:36.696Z,1509696816.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:36.805Z,1509696816.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:37.096Z,1509696817.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:37.111Z,1509696817.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:37.505Z,1509696817.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:37.520Z,1509696817.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:37.905Z,1509696817.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:37.920Z,1509696817.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:38.301Z,1509696818.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:38.316Z,1509696818.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:38.695Z,1509696818.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:38.710Z,1509696818.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:39.095Z,1509696819.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:39.110Z,1509696819.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:39.498Z,1509696819.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:39.513Z,1509696819.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:39.899Z,1509696819.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:39.914Z,1509696819.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:40.295Z,1509696820.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:40.315Z,1509696820.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:40.701Z,1509696820.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:40.717Z,1509696820.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:41.100Z,1509696821.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:41.114Z,1509696821.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:41.500Z,1509696821.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:41.515Z,1509696821.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:41.894Z,1509696821.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:41.915Z,1509696821.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:42.298Z,1509696822.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:42.312Z,1509696822.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:42.692Z,1509696822.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:42.707Z,1509696822.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:43.098Z,1509696823.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:43.113Z,1509696823.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:43.501Z,1509696823.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:43.522Z,1509696823.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:43.905Z,1509696823.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:43.921Z,1509696823.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:44.302Z,1509696824.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:44.317Z,1509696824.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:44.742Z,1509696824.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:44.795Z,1509696824.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:45.098Z,1509696825.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:45.119Z,1509696825.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:45.496Z,1509696825.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:45.511Z,1509696825.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:45.898Z,1509696825.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:45.913Z,1509696825.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:46.299Z,1509696826.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:46.319Z,1509696826.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:46.723Z,1509696826.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:46.768Z,1509696826.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:47.108Z,1509696827.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:47.123Z,1509696827.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:47.508Z,1509696827.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:47.569Z,1509696827.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:47.898Z,1509696827.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:47.919Z,1509696827.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:48.294Z,1509696828.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:48.327Z,1509696828.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:48.715Z,1509696828.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:48.787Z,1509696828.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:49.096Z,1509696829.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:49.147Z,1509696829.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:49.497Z,1509696829.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:49.512Z,1509696829.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:49.897Z,1509696829.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:49.950Z,1509696829.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:50.298Z,1509696830.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:50.350Z,1509696830.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:50.695Z,1509696830.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:50.710Z,1509696830.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:53.895Z,1509696833.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:53.918Z,1509696833.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:54.042Z,1509696834.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:54.073Z,1509696834.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:54.466Z,1509696834.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:54.481Z,1509696834.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:54.865Z,1509696834.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:54.880Z,1509696834.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:55.302Z,1509696835.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:55.338Z,1509696835.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:55.643Z,1509696835.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:55.669Z,1509696835.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:56.046Z,1509696836.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:56.072Z,1509696836.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:56.442Z,1509696836.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:56.468Z,1509696836.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:56.843Z,1509696836.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:56.869Z,1509696836.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:57.293Z,1509696837.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:57.341Z,1509696837.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:57.662Z,1509696837.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:57.677Z,1509696837.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:58.062Z,1509696838.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:58.077Z,1509696838.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:58.461Z,1509696838.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:58.483Z,1509696838.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:58.842Z,1509696838.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:58.868Z,1509696838.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:59.244Z,1509696839.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:59.270Z,1509696839.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:13:59.644Z,1509696839.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:13:59.669Z,1509696839.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:00.040Z,1509696840.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:00.074Z,1509696840.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:00.464Z,1509696840.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:00.479Z,1509696840.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:00.872Z,1509696840.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:00.934Z,1509696840.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:01.261Z,1509696841.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:01.276Z,1509696841.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:01.641Z,1509696841.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:01.669Z,1509696841.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:02.045Z,1509696842.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:02.078Z,1509696842.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:02.443Z,1509696842.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:02.495Z,1509696842.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:02.841Z,1509696842.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:02.869Z,1509696842.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:03.243Z,1509696843.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:03.298Z,1509696843.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:03.662Z,1509696843.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:03.677Z,1509696843.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:04.058Z,1509696844.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:04.116Z,1509696844.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:04.460Z,1509696844.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:04.515Z,1509696844.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:04.870Z,1509696844.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:04.885Z,1509696844.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:05.245Z,1509696845.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:05.272Z,1509696845.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:05.647Z,1509696845.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:05.673Z,1509696845.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:06.043Z,1509696846.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:06.070Z,1509696846.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:06.466Z,1509696846.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:06.481Z,1509696846.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:06.866Z,1509696846.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:06.887Z,1509696846.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:07.269Z,1509696847.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:07.284Z,1509696847.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:07.642Z,1509696847.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:07.677Z,1509696847.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:08.041Z,1509696848.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:08.055Z,1509696848.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:08.445Z,1509696848.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:08.475Z,1509696848.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:08.852Z,1509696848.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:08.879Z,1509696848.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:09.325Z,1509696849.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:09.345Z,1509696849.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:09.658Z,1509696849.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:09.686Z,1509696849.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:10.068Z,1509696850.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:10.083Z,1509696850.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:10.450Z,1509696850.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:10.480Z,1509696850.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:10.843Z,1509696850.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:10.859Z,1509696850.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:11.328Z,1509696851.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:11.345Z,1509696851.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:11.643Z,1509696851.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:11.659Z,1509696851.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:12.043Z,1509696852.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:12.058Z,1509696852.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:12.458Z,1509696852.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:12.480Z,1509696852.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:12.858Z,1509696852.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:12.887Z,1509696852.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:13.255Z,1509696853.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:13.283Z,1509696853.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:13.644Z,1509696853.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:13.681Z,1509696853.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:14.045Z,1509696854.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:14.060Z,1509696854.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:14.445Z,1509696854.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:14.460Z,1509696854.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:14.855Z,1509696854.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:14.880Z,1509696854.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:15.249Z,1509696855.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:15.299Z,1509696855.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:15.658Z,1509696855.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:15.680Z,1509696855.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:16.057Z,1509696856.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:16.082Z,1509696856.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:16.455Z,1509696856.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:16.490Z,1509696856.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:16.869Z,1509696856.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:16.884Z,1509696856.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:17.249Z,1509696857.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:17.273Z,1509696857.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:17.647Z,1509696857.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:17.674Z,1509696857.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:18.043Z,1509696858.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:18.059Z,1509696858.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:18.458Z,1509696858.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:18.490Z,1509696858.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:18.874Z,1509696858.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:18.893Z,1509696858.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:19.250Z,1509696859.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:19.282Z,1509696859.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:19.643Z,1509696859.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:19.651Z,1509696859.651 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:14:19.651Z,1509696859.651 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:14:19.651Z,1509696859.651 [BPC1](ERROR): Communications Fault
2017-11-03T08:14:19.693Z,1509696859.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:19.784Z,1509696859.784 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:14:20.046Z,1509696860.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:20.081Z,1509696860.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:20.445Z,1509696860.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:20.460Z,1509696860.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:20.843Z,1509696860.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:20.863Z,1509696860.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:20.974Z,1509696860.974 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:14:20.974Z,1509696860.974 [BPC1] No Fault, FailCount= 1
2017-11-03T08:14:21.242Z,1509696861.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:21.332Z,1509696861.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:21.662Z,1509696861.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:21.711Z,1509696861.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:22.058Z,1509696862.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:22.094Z,1509696862.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:22.458Z,1509696862.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:22.491Z,1509696862.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:22.851Z,1509696862.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:22.865Z,1509696862.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:23.293Z,1509696863.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:23.347Z,1509696863.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:23.649Z,1509696863.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:23.665Z,1509696863.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:24.048Z,1509696864.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:24.067Z,1509696864.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:24.458Z,1509696864.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:24.474Z,1509696864.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:24.865Z,1509696864.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:24.892Z,1509696864.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:25.302Z,1509696865.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:25.326Z,1509696865.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:25.650Z,1509696865.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:25.665Z,1509696865.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:26.047Z,1509696866.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:26.070Z,1509696866.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:26.453Z,1509696866.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:26.467Z,1509696866.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:26.857Z,1509696866.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:26.872Z,1509696866.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:27.248Z,1509696867.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:27.263Z,1509696867.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:27.663Z,1509696867.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:27.683Z,1509696867.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:28.060Z,1509696868.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:28.075Z,1509696868.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:28.460Z,1509696868.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:28.475Z,1509696868.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:28.845Z,1509696868.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:28.865Z,1509696868.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:29.253Z,1509696869.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:29.268Z,1509696869.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:29.654Z,1509696869.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:29.675Z,1509696869.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:30.048Z,1509696870.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:30.062Z,1509696870.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:30.461Z,1509696870.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:30.476Z,1509696870.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:30.862Z,1509696870.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:30.877Z,1509696870.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:31.260Z,1509696871.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:31.283Z,1509696871.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:31.651Z,1509696871.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:31.666Z,1509696871.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:32.051Z,1509696872.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:32.111Z,1509696872.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:32.452Z,1509696872.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:32.474Z,1509696872.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:32.867Z,1509696872.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:32.884Z,1509696872.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:33.250Z,1509696873.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:33.306Z,1509696873.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:33.661Z,1509696873.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:33.675Z,1509696873.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:34.060Z,1509696874.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:34.115Z,1509696874.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:34.457Z,1509696874.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:34.511Z,1509696874.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:34.850Z,1509696874.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:34.866Z,1509696874.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:35.239Z,1509696875.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:35.266Z,1509696875.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:35.674Z,1509696875.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:35.689Z,1509696875.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:36.043Z,1509696876.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:36.059Z,1509696876.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:36.454Z,1509696876.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:36.469Z,1509696876.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:36.856Z,1509696876.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:36.879Z,1509696876.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:37.293Z,1509696877.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:37.328Z,1509696877.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:37.643Z,1509696877.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:37.680Z,1509696877.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:38.044Z,1509696878.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:38.060Z,1509696878.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:38.443Z,1509696878.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:38.458Z,1509696878.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:38.846Z,1509696878.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:38.867Z,1509696878.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:39.307Z,1509696879.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:39.337Z,1509696879.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:39.667Z,1509696879.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:39.696Z,1509696879.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:40.057Z,1509696880.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:40.089Z,1509696880.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:40.455Z,1509696880.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:40.486Z,1509696880.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:40.849Z,1509696880.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:40.896Z,1509696880.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:41.245Z,1509696881.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:41.260Z,1509696881.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:41.644Z,1509696881.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:41.660Z,1509696881.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:42.046Z,1509696882.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:42.067Z,1509696882.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:42.462Z,1509696882.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:42.493Z,1509696882.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:42.870Z,1509696882.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:42.899Z,1509696882.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:43.258Z,1509696883.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:43.295Z,1509696883.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:43.647Z,1509696883.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:43.662Z,1509696883.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:43.663Z,1509696883.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 160
2017-11-03T08:14:43.663Z,1509696883.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:14:43.665Z,1509696883.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:43.665Z,1509696883.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 160
2017-11-03T08:14:43.665Z,1509696883.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:14:43.666Z,1509696883.666 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:43.667Z,1509696883.667 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 160
2017-11-03T08:14:43.667Z,1509696883.667 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:14:43.780Z,1509696883.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:14:43.780Z,1509696883.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:14:43.780Z,1509696883.780 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:14:44.054Z,1509696884.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:44.172Z,1509696884.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:14:44.173Z,1509696884.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 160
2017-11-03T08:14:44.173Z,1509696884.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:14:44.173Z,1509696884.173 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 160
2017-11-03T08:14:44.174Z,1509696884.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:14:44.174Z,1509696884.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 160
2017-11-03T08:14:44.449Z,1509696884.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:44.463Z,1509696884.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:14:44.463Z,1509696884.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:14:44.464Z,1509696884.464 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:14:44.464Z,1509696884.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:14:44.465Z,1509696884.465 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:14:44.465Z,1509696884.465 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:14:44.465Z,1509696884.465 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:14:44.466Z,1509696884.466 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:14:44.466Z,1509696884.466 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:14:44.848Z,1509696884.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:44.864Z,1509696884.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:45.247Z,1509696885.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:45.311Z,1509696885.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:45.661Z,1509696885.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:45.675Z,1509696885.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:46.064Z,1509696886.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:46.111Z,1509696886.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:46.461Z,1509696886.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:46.476Z,1509696886.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:46.850Z,1509696886.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:46.912Z,1509696886.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:47.253Z,1509696887.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:47.306Z,1509696887.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:47.651Z,1509696887.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:47.671Z,1509696887.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:48.040Z,1509696888.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:48.070Z,1509696888.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:48.466Z,1509696888.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:48.481Z,1509696888.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:48.857Z,1509696888.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:48.872Z,1509696888.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:49.266Z,1509696889.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:49.281Z,1509696889.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:49.284Z,1509696889.284 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T08:09:48.9Z
2017-11-03T08:14:49.284Z,1509696889.284 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T08:14:49.284Z,1509696889.284 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T08:14:49.647Z,1509696889.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:49.675Z,1509696889.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:50.147Z,1509696890.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:50.181Z,1509696890.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:50.448Z,1509696890.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:50.479Z,1509696890.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:53.786Z,1509696893.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:53.801Z,1509696893.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:53.900Z,1509696893.900 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0188.lzma
2017-11-03T08:14:53.939Z,1509696893.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:53.976Z,1509696893.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:54.335Z,1509696894.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:54.355Z,1509696894.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:54.731Z,1509696894.731 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0188.lzma.bak
2017-11-03T08:14:54.731Z,1509696894.731 [DataOverHttps](INFO): SBD MOMSN=5183101
2017-11-03T08:14:54.797Z,1509696894.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:54.827Z,1509696894.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:55.354Z,1509696895.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:55.384Z,1509696895.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:55.535Z,1509696895.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:55.577Z,1509696895.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:58.897Z,1509696898.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:58.973Z,1509696898.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:59.103Z,1509696899.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:59.132Z,1509696899.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:59.525Z,1509696899.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:59.540Z,1509696899.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:14:59.925Z,1509696899.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:14:59.963Z,1509696899.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:00.329Z,1509696900.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:00.344Z,1509696900.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:00.708Z,1509696900.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:00.806Z,1509696900.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:03.905Z,1509696903.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:03.947Z,1509696903.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:04.045Z,1509696904.045 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171103T001125/Express0189.lzma
2017-11-03T08:15:04.082Z,1509696904.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:04.101Z,1509696904.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:04.485Z,1509696904.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:04.500Z,1509696904.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:04.847Z,1509696904.847 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0189.lzma.bak
2017-11-03T08:15:04.847Z,1509696904.847 [DataOverHttps](INFO): SBD MOMSN=5183103
2017-11-03T08:15:04.892Z,1509696904.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:04.927Z,1509696904.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:05.542Z,1509696905.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:05.557Z,1509696905.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:05.560Z,1509696905.560 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T08:15:05.560Z,1509696905.560 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T08:15:05.560Z,1509696905.560 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T08:15:05.693Z,1509696905.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:05.725Z,1509696905.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:07.298Z,1509696907.298 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:15:07.298Z,1509696907.298 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T08:15:07.298Z,1509696907.298 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:15:07.700Z,1509696907.700 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:15:07.865Z,1509696907.865 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:15:08.994Z,1509696908.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:09.015Z,1509696909.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-03T08:15:09.033Z,1509696909.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:09.126Z,1509696909.126 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:15:09.127Z,1509696909.127 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T08:15:09.165Z,1509696909.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:09.214Z,1509696909.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T08:15:09.215Z,1509696909.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:09.586Z,1509696909.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:09.601Z,1509696909.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T08:15:09.602Z,1509696909.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:09.992Z,1509696909.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:10.006Z,1509696910.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T08:15:10.007Z,1509696910.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:10.385Z,1509696910.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:10.400Z,1509696910.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T08:15:10.401Z,1509696910.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:10.767Z,1509696910.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:10.793Z,1509696910.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T08:15:10.794Z,1509696910.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:11.167Z,1509696911.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:11.193Z,1509696911.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T08:15:11.194Z,1509696911.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:11.565Z,1509696911.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:11.591Z,1509696911.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T08:15:11.592Z,1509696911.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:11.966Z,1509696911.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:11.991Z,1509696911.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T08:15:11.992Z,1509696911.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:12.367Z,1509696912.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:12.392Z,1509696912.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-03T08:15:12.393Z,1509696912.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:12.785Z,1509696912.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:12.806Z,1509696912.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T08:15:12.807Z,1509696912.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:13.185Z,1509696913.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:13.200Z,1509696913.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-03T08:15:13.201Z,1509696913.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:13.589Z,1509696913.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:13.606Z,1509696913.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-03T08:15:13.607Z,1509696913.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:13.965Z,1509696913.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:13.994Z,1509696913.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-03T08:15:13.995Z,1509696913.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:14.364Z,1509696914.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:14.390Z,1509696914.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-03T08:15:14.391Z,1509696914.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:14.779Z,1509696914.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:14.907Z,1509696914.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:15:14.908Z,1509696914.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:15.165Z,1509696915.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:15.192Z,1509696915.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-03T08:15:15.193Z,1509696915.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:15.583Z,1509696915.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:15.644Z,1509696915.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-03T08:15:15.645Z,1509696915.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:15.980Z,1509696915.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:15.994Z,1509696915.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-03T08:15:15.995Z,1509696915.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:16.380Z,1509696916.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:16.434Z,1509696916.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-03T08:15:16.435Z,1509696916.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:16.775Z,1509696916.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:16.834Z,1509696916.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T08:15:16.834Z,1509696916.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:17.175Z,1509696917.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:17.189Z,1509696917.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T08:15:17.190Z,1509696917.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:17.572Z,1509696917.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:17.594Z,1509696917.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-03T08:15:17.595Z,1509696917.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:17.973Z,1509696917.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:17.994Z,1509696917.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-03T08:15:17.995Z,1509696917.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:18.386Z,1509696918.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:18.400Z,1509696918.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-03T08:15:18.401Z,1509696918.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:18.782Z,1509696918.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:18.797Z,1509696918.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-03T08:15:18.798Z,1509696918.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:19.181Z,1509696919.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:19.241Z,1509696919.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-03T08:15:19.242Z,1509696919.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:19.580Z,1509696919.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:19.595Z,1509696919.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-03T08:15:19.596Z,1509696919.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:19.972Z,1509696919.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:19.987Z,1509696919.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-03T08:15:19.988Z,1509696919.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:20.375Z,1509696920.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:20.389Z,1509696920.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-03T08:15:20.390Z,1509696920.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:20.776Z,1509696920.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:20.790Z,1509696920.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T08:15:20.791Z,1509696920.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:21.174Z,1509696921.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:21.194Z,1509696921.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T08:15:21.195Z,1509696921.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:21.580Z,1509696921.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:21.595Z,1509696921.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-03T08:15:21.595Z,1509696921.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:21.980Z,1509696921.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:21.994Z,1509696921.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-03T08:15:21.995Z,1509696921.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:22.380Z,1509696922.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:22.402Z,1509696922.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-03T08:15:22.403Z,1509696922.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:22.772Z,1509696922.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:22.787Z,1509696922.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T08:15:22.788Z,1509696922.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:23.170Z,1509696923.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:23.185Z,1509696923.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T08:15:23.185Z,1509696923.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:23.573Z,1509696923.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:23.588Z,1509696923.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T08:15:23.589Z,1509696923.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:23.974Z,1509696923.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:23.989Z,1509696923.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-03T08:15:23.990Z,1509696923.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:24.377Z,1509696924.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:24.391Z,1509696924.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-03T08:15:24.392Z,1509696924.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:24.781Z,1509696924.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:24.796Z,1509696924.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T08:15:24.797Z,1509696924.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:25.180Z,1509696925.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:25.195Z,1509696925.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-03T08:15:25.196Z,1509696925.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:25.582Z,1509696925.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:25.596Z,1509696925.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-03T08:15:25.597Z,1509696925.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:25.974Z,1509696925.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:25.989Z,1509696925.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:26.374Z,1509696926.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:26.389Z,1509696926.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:26.779Z,1509696926.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:26.793Z,1509696926.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:27.177Z,1509696927.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:27.193Z,1509696927.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:27.582Z,1509696927.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:27.666Z,1509696927.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:27.988Z,1509696927.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:28.004Z,1509696928.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:28.387Z,1509696928.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:28.445Z,1509696928.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:28.765Z,1509696928.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:28.816Z,1509696928.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:29.167Z,1509696929.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:29.236Z,1509696929.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:29.567Z,1509696929.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:29.633Z,1509696929.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:29.965Z,1509696929.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:29.992Z,1509696929.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:30.365Z,1509696930.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:30.399Z,1509696930.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:30.786Z,1509696930.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:30.801Z,1509696930.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:31.189Z,1509696931.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:31.211Z,1509696931.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:31.582Z,1509696931.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:31.597Z,1509696931.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:31.967Z,1509696931.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:31.993Z,1509696931.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:32.365Z,1509696932.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:32.398Z,1509696932.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:32.769Z,1509696932.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:32.795Z,1509696932.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:33.168Z,1509696933.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:33.194Z,1509696933.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:33.586Z,1509696933.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:33.601Z,1509696933.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:33.982Z,1509696933.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:34.006Z,1509696934.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:34.386Z,1509696934.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:34.401Z,1509696934.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:34.765Z,1509696934.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:34.847Z,1509696934.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:35.165Z,1509696935.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:35.202Z,1509696935.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:35.561Z,1509696935.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:35.594Z,1509696935.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:35.966Z,1509696935.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:35.992Z,1509696935.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:36.367Z,1509696936.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:36.393Z,1509696936.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:36.750Z,1509696936.750 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T08:15:36.750Z,1509696936.750 [NAL9602] Data Fault, FailCount= 4
2017-11-03T08:15:36.750Z,1509696936.750 [NAL9602](ERROR): Data Fault
2017-11-03T08:15:36.768Z,1509696936.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:36.807Z,1509696936.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:36.896Z,1509696936.896 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T08:15:37.150Z,1509696937.150 [NAL9602](INFO): Powering down
2017-11-03T08:15:37.168Z,1509696937.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:37.199Z,1509696937.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:37.565Z,1509696937.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:37.593Z,1509696937.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:37.960Z,1509696937.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:37.992Z,1509696937.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:38.080Z,1509696938.080 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T08:15:38.081Z,1509696938.081 [NAL9602] No Fault, FailCount= 4
2017-11-03T08:15:38.367Z,1509696938.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:38.397Z,1509696938.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:38.763Z,1509696938.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:38.799Z,1509696938.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:39.167Z,1509696939.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:39.197Z,1509696939.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:39.565Z,1509696939.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:39.592Z,1509696939.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:39.960Z,1509696939.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:39.975Z,1509696939.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:40.360Z,1509696940.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:40.407Z,1509696940.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:40.763Z,1509696940.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:40.779Z,1509696940.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:41.163Z,1509696941.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:41.178Z,1509696941.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:41.563Z,1509696941.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:41.619Z,1509696941.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:41.967Z,1509696941.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:41.982Z,1509696941.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:42.363Z,1509696942.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:42.417Z,1509696942.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:42.763Z,1509696942.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:42.819Z,1509696942.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:43.171Z,1509696943.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:43.191Z,1509696943.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:43.567Z,1509696943.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:43.582Z,1509696943.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:43.967Z,1509696943.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:43.982Z,1509696943.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:44.368Z,1509696944.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:44.383Z,1509696944.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:44.767Z,1509696944.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:44.782Z,1509696944.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:45.167Z,1509696945.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:45.182Z,1509696945.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:45.571Z,1509696945.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:45.587Z,1509696945.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:45.967Z,1509696945.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:45.982Z,1509696945.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:46.367Z,1509696946.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:46.382Z,1509696946.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:46.771Z,1509696946.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:46.805Z,1509696946.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:47.167Z,1509696947.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:47.181Z,1509696947.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:47.567Z,1509696947.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:47.582Z,1509696947.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:47.968Z,1509696947.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:47.983Z,1509696947.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:48.367Z,1509696948.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:48.381Z,1509696948.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:48.767Z,1509696948.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:48.782Z,1509696948.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:49.167Z,1509696949.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:49.183Z,1509696949.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:49.567Z,1509696949.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:49.582Z,1509696949.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:49.967Z,1509696949.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:49.982Z,1509696949.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:50.367Z,1509696950.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:50.383Z,1509696950.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:50.767Z,1509696950.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:50.782Z,1509696950.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:51.168Z,1509696951.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:51.183Z,1509696951.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:51.568Z,1509696951.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:51.587Z,1509696951.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:51.968Z,1509696951.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:51.983Z,1509696951.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:52.367Z,1509696952.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:52.382Z,1509696952.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:52.768Z,1509696952.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:52.819Z,1509696952.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:53.167Z,1509696953.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:53.182Z,1509696953.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:53.567Z,1509696953.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:53.582Z,1509696953.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:53.967Z,1509696953.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:54.035Z,1509696954.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:54.374Z,1509696954.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:54.440Z,1509696954.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:54.771Z,1509696954.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:54.786Z,1509696954.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:55.172Z,1509696955.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:55.187Z,1509696955.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:55.573Z,1509696955.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:55.615Z,1509696955.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:55.974Z,1509696955.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:55.989Z,1509696955.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:56.374Z,1509696956.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:56.425Z,1509696956.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:56.774Z,1509696956.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:56.821Z,1509696956.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:57.168Z,1509696957.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:57.183Z,1509696957.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:57.572Z,1509696957.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:57.587Z,1509696957.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:57.974Z,1509696957.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:57.989Z,1509696957.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:58.374Z,1509696958.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:58.389Z,1509696958.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:58.772Z,1509696958.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:58.818Z,1509696958.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:59.168Z,1509696959.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:59.182Z,1509696959.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:59.568Z,1509696959.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:59.583Z,1509696959.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:15:59.972Z,1509696959.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:15:59.987Z,1509696959.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:00.368Z,1509696960.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:00.382Z,1509696960.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:00.775Z,1509696960.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:00.790Z,1509696960.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:01.173Z,1509696961.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:01.188Z,1509696961.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:01.568Z,1509696961.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:01.583Z,1509696961.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:02.003Z,1509696962.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:02.036Z,1509696962.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:02.402Z,1509696962.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:02.433Z,1509696962.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:02.773Z,1509696962.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:02.795Z,1509696962.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:03.174Z,1509696963.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:03.204Z,1509696963.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:03.574Z,1509696963.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:03.599Z,1509696963.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:03.974Z,1509696963.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:04.001Z,1509696964.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:04.366Z,1509696964.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:04.402Z,1509696964.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:04.769Z,1509696964.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:04.814Z,1509696964.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:05.182Z,1509696965.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:05.220Z,1509696965.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:05.583Z,1509696965.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:05.618Z,1509696965.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:05.973Z,1509696965.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:05.989Z,1509696965.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:12.478Z,1509696972.478 [NAL9602](INFO): Powering up NAL9602
2017-11-03T08:16:12.506Z,1509696972.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:12.532Z,1509696972.532 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:16:12.533Z,1509696972.533 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:16:12.533Z,1509696972.533 [BPC1](ERROR): Communications Fault
2017-11-03T08:16:12.599Z,1509696972.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:12.696Z,1509696972.696 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:16:12.774Z,1509696972.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:12.825Z,1509696972.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:13.137Z,1509696973.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:13.179Z,1509696973.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:13.555Z,1509696973.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:13.571Z,1509696973.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:13.681Z,1509696973.681 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:16:13.681Z,1509696973.681 [BPC1] No Fault, FailCount= 1
2017-11-03T08:16:13.932Z,1509696973.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:14.061Z,1509696974.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:14.360Z,1509696974.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:14.413Z,1509696974.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:14.732Z,1509696974.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:14.779Z,1509696974.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:15.132Z,1509696975.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:15.172Z,1509696975.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:15.532Z,1509696975.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:15.603Z,1509696975.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:15.932Z,1509696975.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:15.975Z,1509696975.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:16.332Z,1509696976.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:16.375Z,1509696976.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:16.732Z,1509696976.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:16.779Z,1509696976.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:17.148Z,1509696977.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:17.187Z,1509696977.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:17.532Z,1509696977.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:17.579Z,1509696977.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:17.960Z,1509696977.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:18.035Z,1509696978.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:18.345Z,1509696978.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:18.418Z,1509696978.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:18.736Z,1509696978.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:18.790Z,1509696978.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:19.138Z,1509696979.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:19.153Z,1509696979.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:19.531Z,1509696979.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:19.545Z,1509696979.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:19.931Z,1509696979.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:19.946Z,1509696979.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:20.335Z,1509696980.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:20.349Z,1509696980.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:20.735Z,1509696980.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:20.750Z,1509696980.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:21.131Z,1509696981.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:21.146Z,1509696981.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:21.531Z,1509696981.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:21.545Z,1509696981.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:21.935Z,1509696981.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:21.949Z,1509696981.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:22.331Z,1509696982.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:22.346Z,1509696982.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:22.735Z,1509696982.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:22.750Z,1509696982.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:23.153Z,1509696983.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:23.178Z,1509696983.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:23.522Z,1509696983.522 [NAL9602](INFO): NAL9602 initialized
2017-11-03T08:16:23.539Z,1509696983.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:23.554Z,1509696983.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:23.936Z,1509696983.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:23.951Z,1509696983.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:24.349Z,1509696984.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:24.385Z,1509696984.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:24.749Z,1509696984.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:24.783Z,1509696984.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:25.149Z,1509696985.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:25.181Z,1509696985.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:25.536Z,1509696985.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:25.551Z,1509696985.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:25.936Z,1509696985.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:25.955Z,1509696985.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:26.336Z,1509696986.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:26.359Z,1509696986.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:26.736Z,1509696986.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:26.805Z,1509696986.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:27.149Z,1509696987.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:27.181Z,1509696987.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:27.553Z,1509696987.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:27.582Z,1509696987.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:27.941Z,1509696987.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:27.987Z,1509696987.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:28.336Z,1509696988.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:28.351Z,1509696988.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:28.738Z,1509696988.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:28.787Z,1509696988.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:29.140Z,1509696989.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:29.191Z,1509696989.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:29.537Z,1509696989.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:29.552Z,1509696989.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:29.938Z,1509696989.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:29.953Z,1509696989.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:30.353Z,1509696990.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:30.383Z,1509696990.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:30.742Z,1509696990.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:30.757Z,1509696990.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:31.146Z,1509696991.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:31.161Z,1509696991.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:31.540Z,1509696991.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:31.555Z,1509696991.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:31.940Z,1509696991.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:31.959Z,1509696991.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:32.340Z,1509696992.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:32.382Z,1509696992.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:32.740Z,1509696992.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:32.755Z,1509696992.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:33.141Z,1509696993.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:33.163Z,1509696993.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:33.545Z,1509696993.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:33.560Z,1509696993.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:33.945Z,1509696993.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:33.961Z,1509696993.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:34.336Z,1509696994.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:34.351Z,1509696994.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:34.738Z,1509696994.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:34.755Z,1509696994.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:35.140Z,1509696995.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:35.155Z,1509696995.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:35.537Z,1509696995.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:35.552Z,1509696995.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:35.934Z,1509696995.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:35.961Z,1509696995.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:36.353Z,1509696996.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:36.368Z,1509696996.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:36.749Z,1509696996.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:36.764Z,1509696996.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:37.154Z,1509696997.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:37.174Z,1509696997.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:37.570Z,1509696997.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:37.595Z,1509696997.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:37.941Z,1509696997.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:37.956Z,1509696997.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:38.342Z,1509696998.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:38.357Z,1509696998.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:38.753Z,1509696998.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:38.768Z,1509696998.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:39.153Z,1509696999.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:39.175Z,1509696999.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:39.554Z,1509696999.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:39.569Z,1509696999.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:39.957Z,1509696999.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:40.018Z,1509697000.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:40.336Z,1509697000.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:40.362Z,1509697000.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:40.747Z,1509697000.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:40.762Z,1509697000.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:41.147Z,1509697001.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:41.220Z,1509697001.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:41.547Z,1509697001.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:41.562Z,1509697001.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:41.932Z,1509697001.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:41.998Z,1509697001.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:42.358Z,1509697002.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:42.378Z,1509697002.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:42.751Z,1509697002.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:42.810Z,1509697002.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:43.154Z,1509697003.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:43.213Z,1509697003.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:43.535Z,1509697003.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:43.563Z,1509697003.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:43.935Z,1509697003.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:43.962Z,1509697003.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:44.333Z,1509697004.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:44.369Z,1509697004.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:44.735Z,1509697004.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:44.761Z,1509697004.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:45.153Z,1509697005.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:45.169Z,1509697005.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:45.553Z,1509697005.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:45.569Z,1509697005.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:45.950Z,1509697005.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:45.964Z,1509697005.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:46.329Z,1509697006.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:46.362Z,1509697006.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:46.733Z,1509697006.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:46.767Z,1509697006.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:47.129Z,1509697007.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:47.157Z,1509697007.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:47.530Z,1509697007.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:47.556Z,1509697007.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:47.935Z,1509697007.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:47.961Z,1509697007.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:48.350Z,1509697008.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:48.365Z,1509697008.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:48.751Z,1509697008.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:48.766Z,1509697008.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:49.154Z,1509697009.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:49.169Z,1509697009.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:49.528Z,1509697009.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:49.559Z,1509697009.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:49.935Z,1509697009.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:49.961Z,1509697009.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:50.335Z,1509697010.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:50.367Z,1509697010.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:50.735Z,1509697010.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:50.767Z,1509697010.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:51.149Z,1509697011.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:51.165Z,1509697011.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:51.553Z,1509697011.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:51.569Z,1509697011.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:51.957Z,1509697011.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:51.978Z,1509697011.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:52.335Z,1509697012.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:52.361Z,1509697012.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:52.732Z,1509697012.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:52.758Z,1509697012.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:53.135Z,1509697013.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:53.161Z,1509697013.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:53.536Z,1509697013.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:53.561Z,1509697013.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:53.931Z,1509697013.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:53.965Z,1509697013.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:54.357Z,1509697014.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:54.378Z,1509697014.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:54.757Z,1509697014.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:54.823Z,1509697014.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:55.153Z,1509697015.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:55.169Z,1509697015.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:55.535Z,1509697015.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:55.579Z,1509697015.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:55.928Z,1509697015.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:55.958Z,1509697015.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:56.336Z,1509697016.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:56.361Z,1509697016.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:56.735Z,1509697016.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:56.783Z,1509697016.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:57.153Z,1509697017.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:57.175Z,1509697017.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:57.553Z,1509697017.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:57.613Z,1509697017.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:57.957Z,1509697017.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:58.006Z,1509697018.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:58.335Z,1509697018.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:58.360Z,1509697018.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:58.735Z,1509697018.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:58.761Z,1509697018.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:59.135Z,1509697019.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:59.160Z,1509697019.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:59.534Z,1509697019.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:59.559Z,1509697019.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:16:59.932Z,1509697019.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:16:59.958Z,1509697019.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:00.349Z,1509697020.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:00.364Z,1509697020.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:00.753Z,1509697020.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:00.768Z,1509697020.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:01.149Z,1509697021.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:01.165Z,1509697021.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:01.528Z,1509697021.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:01.559Z,1509697021.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:01.932Z,1509697021.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:01.962Z,1509697021.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:02.332Z,1509697022.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:02.361Z,1509697022.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:02.728Z,1509697022.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:02.763Z,1509697022.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:03.157Z,1509697023.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:03.178Z,1509697023.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:03.551Z,1509697023.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:03.571Z,1509697023.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:03.950Z,1509697023.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:03.965Z,1509697023.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:04.332Z,1509697024.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:04.362Z,1509697024.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:04.732Z,1509697024.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:04.767Z,1509697024.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:05.135Z,1509697025.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:05.161Z,1509697025.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:05.534Z,1509697025.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:05.559Z,1509697025.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:05.934Z,1509697025.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:05.959Z,1509697025.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:06.358Z,1509697026.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:06.373Z,1509697026.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:09.458Z,1509697029.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:09.479Z,1509697029.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:09.593Z,1509697029.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:09.687Z,1509697029.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:09.991Z,1509697029.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:10.028Z,1509697030.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:10.392Z,1509697030.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:10.456Z,1509697030.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:10.788Z,1509697030.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:10.821Z,1509697030.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:11.197Z,1509697031.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:11.262Z,1509697031.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:11.610Z,1509697031.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:11.628Z,1509697031.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:12.013Z,1509697032.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:12.070Z,1509697032.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:12.385Z,1509697032.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:12.418Z,1509697032.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:12.789Z,1509697032.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:12.822Z,1509697032.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:13.189Z,1509697033.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:13.225Z,1509697033.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:13.588Z,1509697033.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:13.604Z,1509697033.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:13.989Z,1509697033.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:14.004Z,1509697034.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:14.401Z,1509697034.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:14.431Z,1509697034.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:14.803Z,1509697034.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:14.836Z,1509697034.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:15.202Z,1509697035.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:15.230Z,1509697035.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:15.588Z,1509697035.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:15.630Z,1509697035.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:15.987Z,1509697035.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:16.002Z,1509697036.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:16.390Z,1509697036.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:16.405Z,1509697036.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:16.788Z,1509697036.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:16.831Z,1509697036.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:17.201Z,1509697037.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:17.227Z,1509697037.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:17.601Z,1509697037.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:17.633Z,1509697037.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:18.001Z,1509697038.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:18.037Z,1509697038.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:18.388Z,1509697038.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:18.403Z,1509697038.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:18.789Z,1509697038.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:18.804Z,1509697038.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:19.188Z,1509697039.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:19.203Z,1509697039.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:19.590Z,1509697039.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:19.605Z,1509697039.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:19.989Z,1509697039.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:20.006Z,1509697040.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:20.405Z,1509697040.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:20.430Z,1509697040.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:20.808Z,1509697040.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:20.848Z,1509697040.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:21.201Z,1509697041.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:21.238Z,1509697041.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:21.592Z,1509697041.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:21.611Z,1509697041.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:21.991Z,1509697041.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:22.006Z,1509697042.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:22.394Z,1509697042.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:22.409Z,1509697042.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:22.790Z,1509697042.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:22.805Z,1509697042.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:23.207Z,1509697043.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:23.232Z,1509697043.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:23.605Z,1509697043.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:23.659Z,1509697043.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:24.005Z,1509697044.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:24.039Z,1509697044.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:24.389Z,1509697044.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:24.450Z,1509697044.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:24.798Z,1509697044.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:24.816Z,1509697044.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:25.197Z,1509697045.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:25.246Z,1509697045.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:25.598Z,1509697045.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:25.612Z,1509697045.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:25.998Z,1509697045.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:26.062Z,1509697046.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:26.403Z,1509697046.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:26.412Z,1509697046.412 [PNI_TCM](ERROR): CRC does not match. Expected:0x7986 got:0x6593
2017-11-03T08:17:26.470Z,1509697046.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:26.810Z,1509697046.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:26.840Z,1509697046.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:27.210Z,1509697047.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:27.242Z,1509697047.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:27.594Z,1509697047.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:27.615Z,1509697047.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:27.996Z,1509697047.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:28.015Z,1509697048.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:28.397Z,1509697048.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:28.412Z,1509697048.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:28.794Z,1509697048.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:28.813Z,1509697048.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:29.201Z,1509697049.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:29.219Z,1509697049.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:29.612Z,1509697049.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:29.640Z,1509697049.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:30.009Z,1509697050.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:30.048Z,1509697050.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:30.396Z,1509697050.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:30.411Z,1509697050.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:30.796Z,1509697050.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:30.812Z,1509697050.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:31.196Z,1509697051.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:31.215Z,1509697051.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:31.596Z,1509697051.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:31.611Z,1509697051.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:31.993Z,1509697051.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:32.008Z,1509697052.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:32.402Z,1509697052.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:32.421Z,1509697052.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:32.812Z,1509697052.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:32.844Z,1509697052.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:33.198Z,1509697053.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:33.240Z,1509697053.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:33.594Z,1509697053.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:33.615Z,1509697053.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:33.996Z,1509697053.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:34.011Z,1509697054.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:34.396Z,1509697054.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:34.416Z,1509697054.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:34.796Z,1509697054.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:34.811Z,1509697054.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:35.209Z,1509697055.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:35.245Z,1509697055.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:35.598Z,1509697055.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:35.614Z,1509697055.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:36.002Z,1509697056.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:36.020Z,1509697056.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:36.396Z,1509697056.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:36.411Z,1509697056.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:36.796Z,1509697056.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:36.811Z,1509697056.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:37.194Z,1509697057.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:37.214Z,1509697057.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:37.596Z,1509697057.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:37.615Z,1509697057.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:37.998Z,1509697057.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:38.013Z,1509697058.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:38.402Z,1509697058.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:38.466Z,1509697058.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:38.804Z,1509697058.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:38.870Z,1509697058.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:39.206Z,1509697059.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:39.230Z,1509697059.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:39.596Z,1509697059.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:39.631Z,1509697059.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:39.993Z,1509697059.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:40.049Z,1509697060.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:40.394Z,1509697060.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:40.409Z,1509697060.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:40.796Z,1509697060.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:40.854Z,1509697060.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:41.204Z,1509697061.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:41.258Z,1509697061.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:41.604Z,1509697061.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:41.624Z,1509697061.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:42.004Z,1509697062.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:42.022Z,1509697062.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:42.399Z,1509697062.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:42.417Z,1509697062.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:42.803Z,1509697062.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:42.819Z,1509697062.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:43.196Z,1509697063.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:43.211Z,1509697063.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:43.600Z,1509697063.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:43.618Z,1509697063.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:43.999Z,1509697063.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:44.018Z,1509697064.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:44.403Z,1509697064.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:44.423Z,1509697064.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:44.805Z,1509697064.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:44.819Z,1509697064.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:44.820Z,1509697064.820 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 161
2017-11-03T08:17:44.820Z,1509697064.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:17:44.822Z,1509697064.822 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:44.822Z,1509697064.822 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 161
2017-11-03T08:17:44.822Z,1509697064.822 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:17:44.825Z,1509697064.825 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:44.825Z,1509697064.825 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 161
2017-11-03T08:17:44.826Z,1509697064.826 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:17:44.932Z,1509697064.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:17:44.933Z,1509697064.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:17:44.933Z,1509697064.933 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:17:45.205Z,1509697065.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:45.296Z,1509697065.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:17:45.297Z,1509697065.297 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 161
2017-11-03T08:17:45.297Z,1509697065.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:17:45.297Z,1509697065.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 161
2017-11-03T08:17:45.298Z,1509697065.298 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:17:45.298Z,1509697065.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 161
2017-11-03T08:17:45.587Z,1509697065.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:45.615Z,1509697065.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:17:45.616Z,1509697065.616 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:17:45.616Z,1509697065.616 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:17:45.616Z,1509697065.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:17:45.617Z,1509697065.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:17:45.617Z,1509697065.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:17:45.618Z,1509697065.618 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:17:45.618Z,1509697065.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:17:45.618Z,1509697065.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:17:45.983Z,1509697065.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:46.013Z,1509697066.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:17:46.014Z,1509697066.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:46.392Z,1509697066.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:46.417Z,1509697066.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:17:46.418Z,1509697066.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:46.788Z,1509697066.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:46.815Z,1509697066.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:17:46.817Z,1509697066.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:47.215Z,1509697067.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:47.234Z,1509697067.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:17:47.235Z,1509697067.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:47.605Z,1509697067.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:47.641Z,1509697067.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:17:47.642Z,1509697067.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:48.009Z,1509697068.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:48.026Z,1509697068.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:17:48.027Z,1509697068.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:48.391Z,1509697068.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:48.420Z,1509697068.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:17:48.422Z,1509697068.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:48.802Z,1509697068.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:48.827Z,1509697068.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:17:48.828Z,1509697068.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:49.189Z,1509697069.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:49.230Z,1509697069.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:17:49.231Z,1509697069.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:49.592Z,1509697069.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:49.623Z,1509697069.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:17:49.625Z,1509697069.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:49.991Z,1509697069.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:50.020Z,1509697070.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:17:50.021Z,1509697070.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:50.411Z,1509697070.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:50.430Z,1509697070.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:17:50.431Z,1509697070.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:50.813Z,1509697070.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:50.857Z,1509697070.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:17:50.858Z,1509697070.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:51.212Z,1509697071.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:51.231Z,1509697071.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:17:51.232Z,1509697071.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:51.589Z,1509697071.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:51.626Z,1509697071.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:17:51.627Z,1509697071.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:51.989Z,1509697071.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:52.018Z,1509697072.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:17:52.019Z,1509697072.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:52.392Z,1509697072.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:52.417Z,1509697072.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:17:52.418Z,1509697072.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:52.788Z,1509697072.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:52.814Z,1509697072.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:17:52.815Z,1509697072.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:53.214Z,1509697073.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:53.278Z,1509697073.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T08:17:53.279Z,1509697073.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:53.607Z,1509697073.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:53.666Z,1509697073.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T08:17:53.667Z,1509697073.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:54.009Z,1509697074.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:54.046Z,1509697074.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:17:54.047Z,1509697074.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:54.391Z,1509697074.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:54.416Z,1509697074.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:17:54.417Z,1509697074.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:54.790Z,1509697074.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:54.910Z,1509697074.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T08:17:54.911Z,1509697074.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:55.188Z,1509697075.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:55.225Z,1509697075.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:17:55.226Z,1509697075.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:55.591Z,1509697075.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:55.645Z,1509697075.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:17:55.646Z,1509697075.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:55.985Z,1509697075.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:56.033Z,1509697076.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:17:56.034Z,1509697076.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:56.407Z,1509697076.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:56.430Z,1509697076.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:17:56.431Z,1509697076.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:56.817Z,1509697076.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:56.831Z,1509697076.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:17:56.832Z,1509697076.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:57.209Z,1509697077.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:57.244Z,1509697077.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:17:57.245Z,1509697077.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:57.588Z,1509697077.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:57.617Z,1509697077.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:17:57.618Z,1509697077.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:57.991Z,1509697077.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:58.019Z,1509697078.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:17:58.021Z,1509697078.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:58.392Z,1509697078.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:58.421Z,1509697078.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:17:58.422Z,1509697078.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:58.788Z,1509697078.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:58.822Z,1509697078.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:17:58.823Z,1509697078.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:59.207Z,1509697079.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:59.221Z,1509697079.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:17:59.222Z,1509697079.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:17:59.607Z,1509697079.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:17:59.625Z,1509697079.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:17:59.626Z,1509697079.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:00.012Z,1509697080.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:00.027Z,1509697080.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:18:00.028Z,1509697080.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:00.388Z,1509697080.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:00.414Z,1509697080.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:18:00.415Z,1509697080.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:00.792Z,1509697080.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:00.819Z,1509697080.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:18:00.820Z,1509697080.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:01.189Z,1509697081.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:01.220Z,1509697081.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:18:01.221Z,1509697081.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:01.586Z,1509697081.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:01.614Z,1509697081.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:18:01.615Z,1509697081.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:01.987Z,1509697081.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:02.023Z,1509697082.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:18:02.032Z,1509697082.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:02.402Z,1509697082.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:02.432Z,1509697082.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:18:02.433Z,1509697082.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:02.797Z,1509697082.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:02.839Z,1509697082.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:18:02.840Z,1509697082.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:03.198Z,1509697083.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:03.234Z,1509697083.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:18:03.235Z,1509697083.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:03.589Z,1509697083.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:03.630Z,1509697083.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:18:03.632Z,1509697083.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:03.985Z,1509697083.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:03.000Z,1509697084.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:18:04.001Z,1509697084.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:04.390Z,1509697084.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:04.405Z,1509697084.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:18:04.406Z,1509697084.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:04.793Z,1509697084.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:04.812Z,1509697084.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T08:18:04.829Z,1509697084.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:05.202Z,1509697085.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:05.237Z,1509697085.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:05.610Z,1509697085.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:05.638Z,1509697085.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:06.005Z,1509697086.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:06.039Z,1509697086.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:06.395Z,1509697086.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:06.439Z,1509697086.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:09.487Z,1509697089.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:09.578Z,1509697089.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:09.717Z,1509697089.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:09.747Z,1509697089.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:10.142Z,1509697090.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:10.195Z,1509697090.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:10.538Z,1509697090.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:10.556Z,1509697090.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:10.939Z,1509697090.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:10.994Z,1509697090.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:11.317Z,1509697091.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:11.367Z,1509697091.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:11.714Z,1509697091.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:11.744Z,1509697091.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:12.115Z,1509697092.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:12.147Z,1509697092.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:12.531Z,1509697092.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:12.545Z,1509697092.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:12.920Z,1509697092.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:12.947Z,1509697092.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:13.339Z,1509697093.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:13.354Z,1509697093.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:13.739Z,1509697093.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:13.754Z,1509697093.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:14.140Z,1509697094.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:14.155Z,1509697094.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:14.516Z,1509697094.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:14.551Z,1509697094.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:14.920Z,1509697094.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:14.947Z,1509697094.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:15.333Z,1509697095.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:15.347Z,1509697095.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:15.720Z,1509697095.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:15.751Z,1509697095.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:16.135Z,1509697096.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:16.150Z,1509697096.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:16.544Z,1509697096.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:16.559Z,1509697096.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:16.939Z,1509697096.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:16.955Z,1509697096.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:17.319Z,1509697097.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:17.347Z,1509697097.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:17.719Z,1509697097.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:17.746Z,1509697097.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:18.117Z,1509697098.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:18.146Z,1509697098.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:18.520Z,1509697098.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:18.547Z,1509697098.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:18.912Z,1509697098.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:18.944Z,1509697098.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:19.338Z,1509697099.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:19.354Z,1509697099.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:19.742Z,1509697099.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:19.759Z,1509697099.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:20.138Z,1509697100.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:20.157Z,1509697100.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:20.517Z,1509697100.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:20.548Z,1509697100.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:20.919Z,1509697100.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:20.957Z,1509697100.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:21.318Z,1509697101.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:21.349Z,1509697101.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:21.717Z,1509697101.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:21.732Z,1509697101.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:22.130Z,1509697102.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:22.162Z,1509697102.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:22.534Z,1509697102.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:22.556Z,1509697102.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:22.926Z,1509697102.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:22.934Z,1509697102.934 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T08:18:22.934Z,1509697102.934 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:18:22.934Z,1509697102.934 [BPC1](ERROR): Data Fault
2017-11-03T08:18:22.970Z,1509697102.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:23.053Z,1509697103.053 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:18:23.321Z,1509697103.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:23.342Z,1509697103.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:23.721Z,1509697103.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:23.736Z,1509697103.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:24.125Z,1509697104.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:24.163Z,1509697104.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:24.251Z,1509697104.251 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:18:24.251Z,1509697104.251 [BPC1] No Fault, FailCount= 1
2017-11-03T08:18:24.521Z,1509697104.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:24.591Z,1509697104.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:24.921Z,1509697104.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:24.936Z,1509697104.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:25.334Z,1509697105.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:25.383Z,1509697105.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:25.734Z,1509697105.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:25.763Z,1509697105.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:26.134Z,1509697106.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:26.163Z,1509697106.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:26.520Z,1509697106.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:26.543Z,1509697106.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:26.920Z,1509697106.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:26.935Z,1509697106.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:27.321Z,1509697107.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:27.337Z,1509697107.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:27.724Z,1509697107.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:27.739Z,1509697107.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:28.134Z,1509697108.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:28.169Z,1509697108.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:28.534Z,1509697108.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:28.569Z,1509697108.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:28.934Z,1509697108.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:28.969Z,1509697108.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:29.320Z,1509697109.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:29.335Z,1509697109.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:29.720Z,1509697109.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:29.735Z,1509697109.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:30.120Z,1509697110.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:30.135Z,1509697110.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:30.521Z,1509697110.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:30.535Z,1509697110.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:30.920Z,1509697110.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:30.935Z,1509697110.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:31.334Z,1509697111.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:31.367Z,1509697111.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:31.733Z,1509697111.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:31.748Z,1509697111.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:32.126Z,1509697112.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:32.141Z,1509697112.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:32.523Z,1509697112.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:32.543Z,1509697112.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:32.920Z,1509697112.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:32.942Z,1509697112.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:33.321Z,1509697113.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:33.336Z,1509697113.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:33.720Z,1509697113.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:33.735Z,1509697113.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:34.137Z,1509697114.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:34.167Z,1509697114.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:34.537Z,1509697114.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:34.567Z,1509697114.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:34.934Z,1509697114.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:34.969Z,1509697114.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:35.321Z,1509697115.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:35.336Z,1509697115.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:35.719Z,1509697115.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:35.739Z,1509697115.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:36.124Z,1509697116.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:36.147Z,1509697116.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:36.521Z,1509697116.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:36.543Z,1509697116.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:36.920Z,1509697116.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:36.943Z,1509697116.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:37.334Z,1509697117.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:37.389Z,1509697117.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:37.737Z,1509697117.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:37.795Z,1509697117.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:38.134Z,1509697118.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:38.167Z,1509697118.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:38.523Z,1509697118.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:38.579Z,1509697118.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:38.925Z,1509697118.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:38.940Z,1509697118.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:39.325Z,1509697119.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:39.371Z,1509697119.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:39.722Z,1509697119.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:39.768Z,1509697119.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:40.137Z,1509697120.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:40.168Z,1509697120.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:40.530Z,1509697120.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:40.545Z,1509697120.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:40.930Z,1509697120.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:40.945Z,1509697120.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:41.325Z,1509697121.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:41.340Z,1509697121.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:41.724Z,1509697121.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:41.747Z,1509697121.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:42.124Z,1509697122.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:42.139Z,1509697122.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:42.525Z,1509697122.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:42.547Z,1509697122.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:42.924Z,1509697122.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:42.939Z,1509697122.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:43.330Z,1509697123.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:43.345Z,1509697123.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:43.738Z,1509697123.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:43.768Z,1509697123.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:44.138Z,1509697124.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:44.167Z,1509697124.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:44.524Z,1509697124.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:44.539Z,1509697124.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:44.925Z,1509697124.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:44.940Z,1509697124.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:45.321Z,1509697125.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:45.336Z,1509697125.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:45.722Z,1509697125.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:45.740Z,1509697125.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:46.137Z,1509697126.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:46.168Z,1509697126.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:46.537Z,1509697126.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:46.567Z,1509697126.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:46.930Z,1509697126.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:46.945Z,1509697126.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:47.325Z,1509697127.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:47.340Z,1509697127.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:47.725Z,1509697127.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:47.740Z,1509697127.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:48.125Z,1509697128.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:48.140Z,1509697128.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:48.526Z,1509697128.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:48.541Z,1509697128.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:48.925Z,1509697128.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:48.940Z,1509697128.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:49.330Z,1509697129.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:49.345Z,1509697129.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:49.737Z,1509697129.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:49.768Z,1509697129.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:50.138Z,1509697130.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:50.167Z,1509697130.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:50.525Z,1509697130.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:50.540Z,1509697130.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:50.926Z,1509697130.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:50.941Z,1509697130.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:51.326Z,1509697131.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:51.341Z,1509697131.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:51.726Z,1509697131.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:51.741Z,1509697131.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:52.137Z,1509697132.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:52.215Z,1509697132.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:52.538Z,1509697132.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:52.559Z,1509697132.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:52.939Z,1509697132.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:52.995Z,1509697132.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:53.328Z,1509697133.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:53.345Z,1509697133.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:53.728Z,1509697133.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:53.782Z,1509697133.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:54.124Z,1509697134.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:54.144Z,1509697134.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:54.529Z,1509697134.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:54.583Z,1509697134.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:54.927Z,1509697134.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:54.948Z,1509697134.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:55.337Z,1509697135.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:55.354Z,1509697135.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:55.737Z,1509697135.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:55.760Z,1509697135.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:56.137Z,1509697136.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:56.153Z,1509697136.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:56.527Z,1509697136.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:56.542Z,1509697136.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:56.928Z,1509697136.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:56.943Z,1509697136.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:57.329Z,1509697137.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:57.343Z,1509697137.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:57.725Z,1509697137.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:57.740Z,1509697137.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:58.137Z,1509697138.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:58.152Z,1509697138.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:58.537Z,1509697138.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:58.552Z,1509697138.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:58.937Z,1509697138.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:58.959Z,1509697138.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:59.328Z,1509697139.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:59.343Z,1509697139.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:18:59.727Z,1509697139.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:18:59.747Z,1509697139.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:00.125Z,1509697140.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:00.140Z,1509697140.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:00.529Z,1509697140.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:00.544Z,1509697140.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:00.923Z,1509697140.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:00.938Z,1509697140.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:01.337Z,1509697141.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:01.353Z,1509697141.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:01.738Z,1509697141.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:01.758Z,1509697141.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:02.138Z,1509697142.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:02.159Z,1509697142.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:02.525Z,1509697142.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:02.541Z,1509697142.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:02.929Z,1509697142.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:02.944Z,1509697142.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:03.318Z,1509697143.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:03.342Z,1509697143.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:03.726Z,1509697143.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:03.744Z,1509697143.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:04.138Z,1509697144.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:04.153Z,1509697144.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:04.537Z,1509697144.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:04.553Z,1509697144.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:04.937Z,1509697144.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:04.959Z,1509697144.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:05.329Z,1509697145.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:05.343Z,1509697145.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:05.728Z,1509697145.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:05.743Z,1509697145.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:06.128Z,1509697146.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:06.143Z,1509697146.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:06.530Z,1509697146.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:06.611Z,1509697146.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:09.603Z,1509697149.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:09.634Z,1509697149.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:09.788Z,1509697149.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:09.803Z,1509697149.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:10.182Z,1509697150.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:10.234Z,1509697150.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:10.582Z,1509697150.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:10.597Z,1509697150.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:10.968Z,1509697150.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:11.020Z,1509697151.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:11.372Z,1509697151.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:11.411Z,1509697151.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:11.771Z,1509697151.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:11.791Z,1509697151.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:12.181Z,1509697152.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:12.197Z,1509697152.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:12.584Z,1509697152.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:12.599Z,1509697152.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:12.981Z,1509697152.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:12.996Z,1509697152.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:13.368Z,1509697153.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:13.394Z,1509697153.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:13.771Z,1509697153.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:13.786Z,1509697153.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:14.171Z,1509697154.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:14.191Z,1509697154.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:14.570Z,1509697154.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:14.585Z,1509697154.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:14.971Z,1509697154.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:14.986Z,1509697154.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:15.381Z,1509697155.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:15.396Z,1509697155.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:15.781Z,1509697155.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:15.803Z,1509697155.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:16.185Z,1509697156.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:16.199Z,1509697156.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:16.570Z,1509697156.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:16.585Z,1509697156.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:16.968Z,1509697156.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:16.991Z,1509697156.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:17.372Z,1509697157.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:17.387Z,1509697157.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:17.770Z,1509697157.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:17.785Z,1509697157.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:18.182Z,1509697158.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:18.197Z,1509697158.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:18.585Z,1509697158.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:18.606Z,1509697158.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:18.981Z,1509697158.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:18.996Z,1509697158.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:19.368Z,1509697159.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:19.394Z,1509697159.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:19.757Z,1509697159.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:19.783Z,1509697159.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:20.170Z,1509697160.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:20.185Z,1509697160.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:20.569Z,1509697160.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:20.585Z,1509697160.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:20.971Z,1509697160.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:20.986Z,1509697160.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:21.381Z,1509697161.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:21.396Z,1509697161.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:21.781Z,1509697161.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:21.797Z,1509697161.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:22.185Z,1509697162.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:22.199Z,1509697162.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:22.561Z,1509697162.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:22.590Z,1509697162.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:22.960Z,1509697162.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:22.991Z,1509697162.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:23.363Z,1509697163.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:23.390Z,1509697163.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:23.761Z,1509697163.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:23.854Z,1509697163.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:24.179Z,1509697164.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:24.199Z,1509697164.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:24.578Z,1509697164.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:24.619Z,1509697164.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:24.980Z,1509697164.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:24.995Z,1509697164.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:25.360Z,1509697165.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:25.430Z,1509697165.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:25.763Z,1509697165.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:25.834Z,1509697165.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:26.160Z,1509697166.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:26.190Z,1509697166.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:26.561Z,1509697166.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:26.589Z,1509697166.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:26.956Z,1509697166.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:26.991Z,1509697166.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:27.382Z,1509697167.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:27.397Z,1509697167.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:27.781Z,1509697167.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:27.817Z,1509697167.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:28.169Z,1509697168.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:28.195Z,1509697168.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:28.560Z,1509697168.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:28.591Z,1509697168.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:28.960Z,1509697168.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:28.998Z,1509697168.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:29.357Z,1509697169.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:29.371Z,1509697169.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:29.760Z,1509697169.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:29.775Z,1509697169.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:30.173Z,1509697170.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:30.203Z,1509697170.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:30.585Z,1509697170.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:30.600Z,1509697170.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:30.983Z,1509697170.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:31.006Z,1509697171.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:31.366Z,1509697171.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:31.393Z,1509697171.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:31.761Z,1509697171.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:31.776Z,1509697171.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:32.167Z,1509697172.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:32.195Z,1509697172.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:32.566Z,1509697172.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:32.585Z,1509697172.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:32.964Z,1509697172.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:32.979Z,1509697172.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:33.382Z,1509697173.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:33.411Z,1509697173.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:33.773Z,1509697173.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:33.810Z,1509697173.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:34.177Z,1509697174.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:34.208Z,1509697174.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:34.566Z,1509697174.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:34.581Z,1509697174.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:34.970Z,1509697174.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:34.985Z,1509697174.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:35.366Z,1509697175.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:35.381Z,1509697175.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:35.766Z,1509697175.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:35.781Z,1509697175.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:36.179Z,1509697176.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:36.209Z,1509697176.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:36.579Z,1509697176.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:36.610Z,1509697176.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:36.979Z,1509697176.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:37.006Z,1509697177.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:37.368Z,1509697177.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:37.385Z,1509697177.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:37.764Z,1509697177.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:37.852Z,1509697177.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:38.168Z,1509697178.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:38.183Z,1509697178.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:38.570Z,1509697178.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:38.627Z,1509697178.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:38.968Z,1509697178.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:38.982Z,1509697178.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:39.381Z,1509697179.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:39.431Z,1509697179.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:39.774Z,1509697179.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:39.822Z,1509697179.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:40.173Z,1509697180.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:40.188Z,1509697180.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:40.568Z,1509697180.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:40.583Z,1509697180.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:40.968Z,1509697180.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:40.983Z,1509697180.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:41.369Z,1509697181.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:41.383Z,1509697181.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:41.768Z,1509697181.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:41.791Z,1509697181.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:42.173Z,1509697182.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:42.189Z,1509697182.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:42.581Z,1509697182.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:42.610Z,1509697182.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:42.970Z,1509697182.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:42.985Z,1509697182.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:43.366Z,1509697183.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:43.385Z,1509697183.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:43.763Z,1509697183.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:43.778Z,1509697183.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:44.167Z,1509697184.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:44.182Z,1509697184.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:44.568Z,1509697184.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:44.591Z,1509697184.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:44.968Z,1509697184.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:44.983Z,1509697184.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:45.370Z,1509697185.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:45.385Z,1509697185.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:45.781Z,1509697185.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:45.811Z,1509697185.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:46.170Z,1509697186.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:46.184Z,1509697186.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:46.569Z,1509697186.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:46.584Z,1509697186.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:46.967Z,1509697186.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:46.986Z,1509697186.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:47.369Z,1509697187.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:47.384Z,1509697187.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:47.769Z,1509697187.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:47.784Z,1509697187.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:48.174Z,1509697188.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:48.189Z,1509697188.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:48.582Z,1509697188.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:48.612Z,1509697188.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:48.982Z,1509697188.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:49.011Z,1509697189.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:49.368Z,1509697189.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:49.384Z,1509697189.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:49.769Z,1509697189.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:49.783Z,1509697189.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:50.168Z,1509697190.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:50.183Z,1509697190.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:50.568Z,1509697190.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:50.583Z,1509697190.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:50.976Z,1509697190.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:50.991Z,1509697190.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:51.381Z,1509697191.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:51.439Z,1509697191.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:51.773Z,1509697191.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:51.823Z,1509697191.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:52.172Z,1509697192.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:52.187Z,1509697192.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:52.568Z,1509697192.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:52.619Z,1509697192.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:52.966Z,1509697192.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:52.985Z,1509697192.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:53.368Z,1509697193.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:53.414Z,1509697193.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:53.768Z,1509697193.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:53.823Z,1509697193.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:54.173Z,1509697194.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:54.189Z,1509697194.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:54.581Z,1509697194.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:54.614Z,1509697194.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:54.981Z,1509697194.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:55.016Z,1509697195.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:55.368Z,1509697195.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:55.383Z,1509697195.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:55.768Z,1509697195.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:55.782Z,1509697195.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:56.168Z,1509697196.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:56.183Z,1509697196.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:56.569Z,1509697196.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:56.584Z,1509697196.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:56.969Z,1509697196.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:56.983Z,1509697196.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:57.381Z,1509697197.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:57.416Z,1509697197.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:57.774Z,1509697197.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:57.789Z,1509697197.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:58.169Z,1509697198.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:58.190Z,1509697198.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:58.564Z,1509697198.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:58.579Z,1509697198.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:58.968Z,1509697198.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:58.983Z,1509697198.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:59.368Z,1509697199.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:59.383Z,1509697199.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:19:59.768Z,1509697199.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:19:59.783Z,1509697199.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:00.181Z,1509697200.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:00.217Z,1509697200.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:00.580Z,1509697200.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:00.595Z,1509697200.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:00.974Z,1509697200.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:00.989Z,1509697200.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:01.368Z,1509697201.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:01.383Z,1509697201.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:01.768Z,1509697201.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:01.782Z,1509697201.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:02.167Z,1509697202.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:02.187Z,1509697202.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:02.568Z,1509697202.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:02.591Z,1509697202.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:02.963Z,1509697202.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:02.989Z,1509697202.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:03.382Z,1509697203.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:03.397Z,1509697203.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:03.782Z,1509697203.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:03.797Z,1509697203.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:04.182Z,1509697204.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:04.203Z,1509697204.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:04.563Z,1509697204.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:04.595Z,1509697204.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:04.960Z,1509697204.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:04.991Z,1509697204.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:05.363Z,1509697205.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:05.394Z,1509697205.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:05.763Z,1509697205.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:05.847Z,1509697205.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:05.854Z,1509697205.854 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T08:20:05.854Z,1509697205.854 [Default:CheckIn:C.Wait] Stopped
2017-11-03T08:20:05.854Z,1509697205.854 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T08:20:05.854Z,1509697205.854 [Default:CheckIn:D] Running Loop=1
2017-11-03T08:20:06.181Z,1509697206.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:06.196Z,1509697206.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:06.199Z,1509697206.199 [Default:CheckIn:D] Stopped
2017-11-03T08:20:06.199Z,1509697206.199 [Default:CheckIn:E] Running Loop=1
2017-11-03T08:20:06.585Z,1509697206.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:06.638Z,1509697206.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:06.642Z,1509697206.642 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 484.977214 min 
2017-11-03T08:20:06.642Z,1509697206.642 [Default:CheckIn:E] Stopped
2017-11-03T08:20:06.642Z,1509697206.642 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T08:20:06.642Z,1509697206.642 [Default:CheckIn] Stopped
2017-11-03T08:20:06.642Z,1509697206.642 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T08:20:06.643Z,1509697206.643 [Default:CheckIn](INFO): Running loop #48
2017-11-03T08:20:06.643Z,1509697206.643 [Default:CheckIn] Running Loop=48
2017-11-03T08:20:06.643Z,1509697206.643 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T08:20:06.643Z,1509697206.643 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T08:20:09.662Z,1509697209.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:09.693Z,1509697209.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:09.824Z,1509697209.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:09.894Z,1509697209.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:10.228Z,1509697210.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:10.294Z,1509697210.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:10.643Z,1509697210.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:10.658Z,1509697210.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:11.049Z,1509697211.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:11.064Z,1509697211.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:11.450Z,1509697211.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:11.464Z,1509697211.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:11.846Z,1509697211.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:11.861Z,1509697211.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:12.237Z,1509697212.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:12.253Z,1509697212.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:12.624Z,1509697212.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:12.650Z,1509697212.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:13.049Z,1509697213.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:13.064Z,1509697213.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:13.449Z,1509697213.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:13.464Z,1509697213.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:13.849Z,1509697213.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:13.864Z,1509697213.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:14.227Z,1509697214.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:14.253Z,1509697214.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:14.638Z,1509697214.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:14.653Z,1509697214.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:15.027Z,1509697215.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:15.053Z,1509697215.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:15.449Z,1509697215.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:15.464Z,1509697215.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:15.849Z,1509697215.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:15.864Z,1509697215.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:16.249Z,1509697216.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:16.264Z,1509697216.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:16.627Z,1509697216.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:16.653Z,1509697216.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:17.037Z,1509697217.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:17.058Z,1509697217.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:17.428Z,1509697217.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:17.454Z,1509697217.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:17.827Z,1509697217.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:17.855Z,1509697217.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:18.249Z,1509697218.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:18.264Z,1509697218.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:18.650Z,1509697218.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:18.670Z,1509697218.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:19.050Z,1509697219.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:19.065Z,1509697219.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:19.428Z,1509697219.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:19.462Z,1509697219.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:19.839Z,1509697219.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:19.853Z,1509697219.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:20.241Z,1509697220.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:20.256Z,1509697220.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:20.637Z,1509697220.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:20.687Z,1509697220.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:21.050Z,1509697221.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:21.059Z,1509697221.059 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:20:21.059Z,1509697221.059 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:20:21.059Z,1509697221.059 [BPC1](ERROR): Data Fault
2017-11-03T08:20:21.067Z,1509697221.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:21.182Z,1509697221.182 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:20:21.449Z,1509697221.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:21.464Z,1509697221.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:21.850Z,1509697221.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:21.865Z,1509697221.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:22.225Z,1509697222.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:22.253Z,1509697222.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:22.340Z,1509697222.340 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:20:22.340Z,1509697222.340 [BPC1] No Fault, FailCount= 1
2017-11-03T08:20:22.625Z,1509697222.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:22.711Z,1509697222.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:23.049Z,1509697223.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:23.064Z,1509697223.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:23.450Z,1509697223.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:23.465Z,1509697223.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:23.849Z,1509697223.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:23.899Z,1509697223.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:24.237Z,1509697224.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:24.253Z,1509697224.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:24.627Z,1509697224.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:24.653Z,1509697224.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:25.049Z,1509697225.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:25.065Z,1509697225.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:25.449Z,1509697225.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:25.464Z,1509697225.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:25.848Z,1509697225.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:25.863Z,1509697225.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:26.228Z,1509697226.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:26.253Z,1509697226.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:26.636Z,1509697226.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:26.658Z,1509697226.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:27.049Z,1509697227.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:27.064Z,1509697227.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:27.449Z,1509697227.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:27.464Z,1509697227.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:27.849Z,1509697227.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:27.864Z,1509697227.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:28.228Z,1509697228.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:28.254Z,1509697228.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:28.627Z,1509697228.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:28.653Z,1509697228.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:29.049Z,1509697229.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:29.064Z,1509697229.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:29.445Z,1509697229.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:29.460Z,1509697229.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:29.849Z,1509697229.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:29.864Z,1509697229.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:30.238Z,1509697230.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:30.253Z,1509697230.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:30.627Z,1509697230.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:30.653Z,1509697230.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:31.049Z,1509697231.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:31.064Z,1509697231.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:31.449Z,1509697231.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:31.471Z,1509697231.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:31.850Z,1509697231.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:31.866Z,1509697231.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:32.226Z,1509697232.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:32.252Z,1509697232.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:32.637Z,1509697232.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:32.657Z,1509697232.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:33.050Z,1509697233.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:33.065Z,1509697233.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:33.450Z,1509697233.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:33.465Z,1509697233.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:33.849Z,1509697233.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:33.864Z,1509697233.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:34.232Z,1509697234.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:34.266Z,1509697234.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:34.631Z,1509697234.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:34.662Z,1509697234.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:35.050Z,1509697235.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:35.065Z,1509697235.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:35.454Z,1509697235.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:35.474Z,1509697235.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:35.853Z,1509697235.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:35.923Z,1509697235.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:36.229Z,1509697236.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:36.261Z,1509697236.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:36.628Z,1509697236.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:36.670Z,1509697236.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:37.041Z,1509697237.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:37.067Z,1509697237.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:37.441Z,1509697237.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:37.509Z,1509697237.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:37.840Z,1509697237.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:37.871Z,1509697237.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:38.230Z,1509697238.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:38.275Z,1509697238.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:38.631Z,1509697238.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:38.667Z,1509697238.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:39.041Z,1509697239.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:39.073Z,1509697239.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:39.441Z,1509697239.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:39.472Z,1509697239.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:39.845Z,1509697239.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:39.869Z,1509697239.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:40.230Z,1509697240.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:40.245Z,1509697240.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:40.628Z,1509697240.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:40.643Z,1509697240.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:41.041Z,1509697241.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:41.073Z,1509697241.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:41.445Z,1509697241.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:41.476Z,1509697241.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:41.845Z,1509697241.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:41.877Z,1509697241.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:42.232Z,1509697242.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:42.255Z,1509697242.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:42.631Z,1509697242.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:42.646Z,1509697242.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:43.041Z,1509697243.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:43.073Z,1509697243.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:43.441Z,1509697243.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:43.456Z,1509697243.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:43.845Z,1509697243.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:43.877Z,1509697243.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:44.229Z,1509697244.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:44.243Z,1509697244.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:44.635Z,1509697244.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:44.655Z,1509697244.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:45.049Z,1509697245.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:45.074Z,1509697245.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:45.441Z,1509697245.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:45.473Z,1509697245.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:45.845Z,1509697245.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:45.877Z,1509697245.877 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:45.877Z,1509697245.877 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 162
2017-11-03T08:20:45.877Z,1509697245.877 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:20:45.879Z,1509697245.879 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:45.879Z,1509697245.879 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 162
2017-11-03T08:20:45.879Z,1509697245.879 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:20:45.881Z,1509697245.881 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:45.881Z,1509697245.881 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 162
2017-11-03T08:20:45.881Z,1509697245.881 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:20:45.965Z,1509697245.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:20:45.965Z,1509697245.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:20:45.965Z,1509697245.965 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:20:46.236Z,1509697246.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:46.360Z,1509697246.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:20:46.360Z,1509697246.360 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 162
2017-11-03T08:20:46.360Z,1509697246.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:20:46.360Z,1509697246.360 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 162
2017-11-03T08:20:46.361Z,1509697246.361 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:20:46.361Z,1509697246.361 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 162
2017-11-03T08:20:46.636Z,1509697246.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:46.650Z,1509697246.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:20:46.651Z,1509697246.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:20:46.651Z,1509697246.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:20:46.651Z,1509697246.651 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:20:46.652Z,1509697246.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:20:46.652Z,1509697246.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:20:46.653Z,1509697246.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:20:46.653Z,1509697246.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:20:46.654Z,1509697246.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:20:47.049Z,1509697247.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:47.064Z,1509697247.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:20:47.081Z,1509697247.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:47.449Z,1509697247.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:47.464Z,1509697247.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:20:47.481Z,1509697247.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:47.842Z,1509697247.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:47.857Z,1509697247.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:20:47.858Z,1509697247.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:48.237Z,1509697248.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:48.252Z,1509697248.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:20:48.253Z,1509697248.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:48.639Z,1509697248.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:48.658Z,1509697248.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:20:48.659Z,1509697248.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:49.046Z,1509697249.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:49.060Z,1509697249.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:20:49.061Z,1509697249.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:49.441Z,1509697249.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:49.456Z,1509697249.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:20:49.457Z,1509697249.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:49.846Z,1509697249.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:49.860Z,1509697249.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:20:49.861Z,1509697249.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:50.237Z,1509697250.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:50.302Z,1509697250.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:20:50.303Z,1509697250.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:50.638Z,1509697250.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:50.697Z,1509697250.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:20:50.698Z,1509697250.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:51.048Z,1509697251.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:51.063Z,1509697251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:20:51.065Z,1509697251.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:51.448Z,1509697251.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:51.466Z,1509697251.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:20:51.467Z,1509697251.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:51.848Z,1509697251.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:51.894Z,1509697251.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:20:51.895Z,1509697251.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:52.241Z,1509697252.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:52.255Z,1509697252.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:20:52.256Z,1509697252.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:52.639Z,1509697252.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:52.690Z,1509697252.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:20:52.691Z,1509697252.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:53.048Z,1509697253.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:53.098Z,1509697253.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:20:53.099Z,1509697253.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:53.449Z,1509697253.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:53.463Z,1509697253.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:20:53.464Z,1509697253.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:53.849Z,1509697253.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:53.863Z,1509697253.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:20:53.865Z,1509697253.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:54.238Z,1509697254.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:54.253Z,1509697254.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:20:54.254Z,1509697254.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:54.641Z,1509697254.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:54.655Z,1509697254.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T08:20:54.656Z,1509697254.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:55.048Z,1509697255.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:55.063Z,1509697255.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:20:55.064Z,1509697255.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:55.450Z,1509697255.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:55.470Z,1509697255.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:20:55.471Z,1509697255.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:55.849Z,1509697255.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:55.864Z,1509697255.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:20:55.865Z,1509697255.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:56.234Z,1509697256.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:56.252Z,1509697256.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:20:56.253Z,1509697256.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:56.638Z,1509697256.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:56.653Z,1509697256.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:20:56.654Z,1509697256.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:57.048Z,1509697257.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:57.067Z,1509697257.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:20:57.069Z,1509697257.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:57.442Z,1509697257.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:57.464Z,1509697257.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:20:57.465Z,1509697257.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:57.851Z,1509697257.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:57.866Z,1509697257.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:20:57.867Z,1509697257.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:58.226Z,1509697258.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:58.261Z,1509697258.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:20:58.262Z,1509697258.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:58.625Z,1509697258.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:58.653Z,1509697258.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:20:58.653Z,1509697258.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:59.042Z,1509697259.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:59.069Z,1509697259.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:20:59.070Z,1509697259.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:59.455Z,1509697259.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:59.470Z,1509697259.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:20:59.471Z,1509697259.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:20:59.842Z,1509697259.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:20:59.868Z,1509697259.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:20:59.869Z,1509697259.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:00.230Z,1509697260.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:00.261Z,1509697260.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:21:00.262Z,1509697260.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:00.629Z,1509697260.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:00.670Z,1509697260.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:21:00.671Z,1509697260.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:01.042Z,1509697261.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:01.073Z,1509697261.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:21:01.074Z,1509697261.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:01.442Z,1509697261.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:01.473Z,1509697261.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:21:01.474Z,1509697261.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:01.842Z,1509697261.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:01.872Z,1509697261.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:21:01.873Z,1509697261.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:02.236Z,1509697262.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:02.252Z,1509697262.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:21:02.269Z,1509697262.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:02.632Z,1509697262.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:02.646Z,1509697262.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:21:02.647Z,1509697262.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:03.049Z,1509697263.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:03.082Z,1509697263.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:21:03.083Z,1509697263.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:03.477Z,1509697263.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:03.523Z,1509697263.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:21:03.524Z,1509697263.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:03.867Z,1509697263.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:03.891Z,1509697263.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:21:03.892Z,1509697263.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:04.242Z,1509697264.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:04.256Z,1509697264.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:21:04.257Z,1509697264.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:04.637Z,1509697264.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:04.664Z,1509697264.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:21:04.669Z,1509697264.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:05.047Z,1509697265.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:05.143Z,1509697265.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T08:21:05.144Z,1509697265.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:05.466Z,1509697265.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:05.489Z,1509697265.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:21:05.490Z,1509697265.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:05.852Z,1509697265.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:05.927Z,1509697265.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:06.237Z,1509697266.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:06.281Z,1509697266.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:06.635Z,1509697266.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:06.702Z,1509697266.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:12.594Z,1509697272.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:12.679Z,1509697272.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:12.877Z,1509697272.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:12.923Z,1509697272.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:13.266Z,1509697273.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:13.303Z,1509697273.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:13.661Z,1509697273.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:13.685Z,1509697273.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:14.035Z,1509697274.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:14.085Z,1509697274.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:14.451Z,1509697274.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:14.490Z,1509697274.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:14.839Z,1509697274.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:14.879Z,1509697274.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:15.263Z,1509697275.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:15.298Z,1509697275.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:15.656Z,1509697275.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:15.706Z,1509697275.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:16.052Z,1509697276.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:16.095Z,1509697276.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:16.439Z,1509697276.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:16.467Z,1509697276.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:16.859Z,1509697276.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:16.914Z,1509697276.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:17.230Z,1509697277.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:17.273Z,1509697277.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:17.631Z,1509697277.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:17.662Z,1509697277.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:18.051Z,1509697278.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:18.071Z,1509697278.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:18.452Z,1509697278.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:18.480Z,1509697278.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:18.855Z,1509697278.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:18.884Z,1509697278.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:19.232Z,1509697279.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:19.267Z,1509697279.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:19.632Z,1509697279.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:19.675Z,1509697279.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:20.068Z,1509697280.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:20.084Z,1509697280.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:20.456Z,1509697280.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:20.474Z,1509697280.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:20.842Z,1509697280.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:20.868Z,1509697280.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:21.232Z,1509697281.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:21.263Z,1509697281.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:21.629Z,1509697281.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:21.644Z,1509697281.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:22.043Z,1509697282.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:22.069Z,1509697282.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:22.442Z,1509697282.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:22.468Z,1509697282.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:22.841Z,1509697282.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:22.871Z,1509697282.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:23.230Z,1509697283.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:23.245Z,1509697283.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:23.628Z,1509697283.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:23.671Z,1509697283.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:24.046Z,1509697284.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:24.064Z,1509697284.064 [PNI_TCM](ERROR): CRC does not match. Expected:0x49104 got:0x1052
2017-11-03T08:21:24.090Z,1509697284.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:24.442Z,1509697284.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:24.467Z,1509697284.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:24.842Z,1509697284.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:24.927Z,1509697284.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:25.228Z,1509697285.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:25.270Z,1509697285.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:25.631Z,1509697285.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:25.637Z,1509697285.637 [PNI_TCM](ERROR): CRC does not match. Expected:0x934 got:0x61212
2017-11-03T08:21:25.706Z,1509697285.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:26.039Z,1509697286.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:26.054Z,1509697286.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:26.449Z,1509697286.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:26.487Z,1509697286.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:26.851Z,1509697286.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:26.906Z,1509697286.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:27.250Z,1509697287.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:27.271Z,1509697287.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:27.635Z,1509697287.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:27.654Z,1509697287.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:28.039Z,1509697288.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:28.059Z,1509697288.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:28.438Z,1509697288.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:28.459Z,1509697288.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:28.834Z,1509697288.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:28.865Z,1509697288.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:29.245Z,1509697289.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:29.260Z,1509697289.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:29.648Z,1509697289.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:29.663Z,1509697289.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:30.086Z,1509697290.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:30.100Z,1509697290.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:30.441Z,1509697290.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:30.456Z,1509697290.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:30.840Z,1509697290.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:30.855Z,1509697290.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:31.229Z,1509697291.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:31.272Z,1509697291.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:31.629Z,1509697291.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:31.674Z,1509697291.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:32.043Z,1509697292.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:32.060Z,1509697292.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x35117 got:0x4892
2017-11-03T08:21:32.090Z,1509697292.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:32.441Z,1509697292.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:32.478Z,1509697292.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:32.837Z,1509697292.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:32.870Z,1509697292.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:33.229Z,1509697293.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:33.271Z,1509697293.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:33.670Z,1509697293.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:33.677Z,1509697293.677 [PNI_TCM](ERROR): CRC does not match. Expected:0x40561 got:0x40732
2017-11-03T08:21:33.695Z,1509697293.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:34.041Z,1509697294.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:34.068Z,1509697294.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:34.441Z,1509697294.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:34.511Z,1509697294.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:34.843Z,1509697294.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:34.871Z,1509697294.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:35.232Z,1509697295.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:35.247Z,1509697295.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:35.635Z,1509697295.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:35.666Z,1509697295.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:36.045Z,1509697296.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:36.074Z,1509697296.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:36.447Z,1509697296.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:36.479Z,1509697296.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:36.843Z,1509697296.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:36.871Z,1509697296.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:37.232Z,1509697297.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:37.247Z,1509697297.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:37.630Z,1509697297.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:37.645Z,1509697297.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:38.042Z,1509697298.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:38.066Z,1509697298.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:38.446Z,1509697298.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:38.475Z,1509697298.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:38.841Z,1509697298.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:38.946Z,1509697298.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:39.233Z,1509697299.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:39.248Z,1509697299.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:39.637Z,1509697299.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:39.691Z,1509697299.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:40.042Z,1509697300.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:40.071Z,1509697300.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:40.449Z,1509697300.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:40.519Z,1509697300.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:40.845Z,1509697300.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:40.903Z,1509697300.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:41.228Z,1509697301.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:41.274Z,1509697301.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:41.633Z,1509697301.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:41.640Z,1509697301.640 [PNI_TCM](ERROR): CRC does not match. Expected:0x39816 got:0x64540
2017-11-03T08:21:41.676Z,1509697301.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:42.060Z,1509697302.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:42.075Z,1509697302.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:42.445Z,1509697302.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:42.475Z,1509697302.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:42.847Z,1509697302.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:42.871Z,1509697302.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:43.238Z,1509697303.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:43.273Z,1509697303.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:43.630Z,1509697303.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:43.645Z,1509697303.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:44.045Z,1509697304.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:44.070Z,1509697304.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:44.451Z,1509697304.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:44.479Z,1509697304.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:44.843Z,1509697304.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:44.871Z,1509697304.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:45.236Z,1509697305.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:45.271Z,1509697305.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:45.631Z,1509697305.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:45.651Z,1509697305.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:46.047Z,1509697306.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:46.075Z,1509697306.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:46.446Z,1509697306.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:46.475Z,1509697306.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:46.849Z,1509697306.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:46.879Z,1509697306.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:47.234Z,1509697307.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:47.249Z,1509697307.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:47.634Z,1509697307.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:47.675Z,1509697307.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:48.050Z,1509697308.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:48.066Z,1509697308.066 [PNI_TCM](ERROR): CRC does not match. Expected:0x54428 got:0x7361
2017-11-03T08:21:48.091Z,1509697308.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:48.441Z,1509697308.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:48.492Z,1509697308.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:48.845Z,1509697308.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:48.874Z,1509697308.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:49.235Z,1509697309.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:49.252Z,1509697309.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:49.631Z,1509697309.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:49.651Z,1509697309.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:50.050Z,1509697310.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:50.073Z,1509697310.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:50.450Z,1509697310.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:50.473Z,1509697310.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:50.847Z,1509697310.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:50.876Z,1509697310.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:51.236Z,1509697311.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:51.251Z,1509697311.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:51.638Z,1509697311.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:51.653Z,1509697311.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:52.046Z,1509697312.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:52.077Z,1509697312.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:52.447Z,1509697312.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:52.546Z,1509697312.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:52.847Z,1509697312.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:52.880Z,1509697312.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:53.238Z,1509697313.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:53.253Z,1509697313.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:53.632Z,1509697313.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:53.690Z,1509697313.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:54.040Z,1509697314.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:54.056Z,1509697314.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:54.447Z,1509697314.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:54.499Z,1509697314.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:54.890Z,1509697314.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:54.978Z,1509697314.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:55.233Z,1509697315.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:55.248Z,1509697315.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:55.633Z,1509697315.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:55.651Z,1509697315.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:56.046Z,1509697316.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:56.082Z,1509697316.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:56.169Z,1509697316.169 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T08:21:56.449Z,1509697316.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:56.481Z,1509697316.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:56.845Z,1509697316.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:56.881Z,1509697316.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:57.233Z,1509697317.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:57.251Z,1509697317.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:57.633Z,1509697317.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:57.648Z,1509697317.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:58.038Z,1509697318.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:58.053Z,1509697318.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:58.445Z,1509697318.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:58.460Z,1509697318.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:58.851Z,1509697318.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:58.879Z,1509697318.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:59.235Z,1509697319.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:59.255Z,1509697319.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:21:59.639Z,1509697319.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:21:59.659Z,1509697319.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:00.049Z,1509697320.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:00.077Z,1509697320.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:00.440Z,1509697320.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:00.455Z,1509697320.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:00.842Z,1509697320.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:00.878Z,1509697320.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:01.239Z,1509697321.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:01.254Z,1509697321.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:01.636Z,1509697321.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:01.655Z,1509697321.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:02.042Z,1509697322.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:02.078Z,1509697322.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:02.449Z,1509697322.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:02.478Z,1509697322.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:02.850Z,1509697322.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:02.879Z,1509697322.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:03.236Z,1509697323.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:03.251Z,1509697323.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:03.637Z,1509697323.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:03.653Z,1509697323.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:04.050Z,1509697324.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:04.079Z,1509697324.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:04.449Z,1509697324.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:04.477Z,1509697324.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:04.849Z,1509697324.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:04.878Z,1509697324.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:05.239Z,1509697325.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:05.259Z,1509697325.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:05.638Z,1509697325.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:05.653Z,1509697325.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:06.049Z,1509697326.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:06.057Z,1509697326.057 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T08:22:06.057Z,1509697326.057 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:22:06.058Z,1509697326.058 [BPC1](ERROR): Data Fault
2017-11-03T08:22:06.094Z,1509697326.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:06.170Z,1509697326.170 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:22:06.450Z,1509697326.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:06.479Z,1509697326.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:06.935Z,1509697326.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:06.951Z,1509697326.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:09.932Z,1509697329.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:09.947Z,1509697329.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:10.025Z,1509697330.025 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:22:10.025Z,1509697330.025 [BPC1] No Fault, FailCount= 1
2017-11-03T08:22:10.063Z,1509697330.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:10.134Z,1509697330.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:10.474Z,1509697330.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:10.519Z,1509697330.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:10.874Z,1509697330.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:10.917Z,1509697330.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:11.270Z,1509697331.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:11.303Z,1509697331.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:11.661Z,1509697331.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:11.688Z,1509697331.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:12.061Z,1509697332.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:12.076Z,1509697332.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:12.464Z,1509697332.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:12.498Z,1509697332.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:12.863Z,1509697332.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:12.895Z,1509697332.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:13.278Z,1509697333.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:13.303Z,1509697333.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:13.674Z,1509697333.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:13.698Z,1509697333.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:14.074Z,1509697334.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:14.096Z,1509697334.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:14.467Z,1509697334.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:14.503Z,1509697334.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:14.864Z,1509697334.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:14.880Z,1509697334.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:15.261Z,1509697335.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:15.276Z,1509697335.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:15.659Z,1509697335.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:15.674Z,1509697335.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:16.074Z,1509697336.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:16.097Z,1509697336.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:16.477Z,1509697336.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:16.507Z,1509697336.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:16.873Z,1509697336.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:16.898Z,1509697336.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:17.260Z,1509697337.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:17.275Z,1509697337.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:17.660Z,1509697337.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:17.679Z,1509697337.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:18.089Z,1509697338.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:18.104Z,1509697338.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:18.474Z,1509697338.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:18.497Z,1509697338.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:18.874Z,1509697338.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:18.897Z,1509697338.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:19.260Z,1509697339.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:19.275Z,1509697339.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:19.664Z,1509697339.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:19.680Z,1509697339.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:20.074Z,1509697340.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:20.097Z,1509697340.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:20.473Z,1509697340.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:20.498Z,1509697340.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:20.874Z,1509697340.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:20.897Z,1509697340.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:21.265Z,1509697341.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:21.297Z,1509697341.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:21.660Z,1509697341.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:21.700Z,1509697341.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:22.074Z,1509697342.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:22.097Z,1509697342.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:22.491Z,1509697342.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:22.571Z,1509697342.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:22.882Z,1509697342.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:22.911Z,1509697342.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:23.264Z,1509697343.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:23.287Z,1509697343.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:23.663Z,1509697343.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:23.719Z,1509697343.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:24.077Z,1509697344.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:24.092Z,1509697344.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:24.477Z,1509697344.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:24.534Z,1509697344.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:24.878Z,1509697344.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:24.934Z,1509697344.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:25.268Z,1509697345.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:25.283Z,1509697345.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:25.664Z,1509697345.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:25.679Z,1509697345.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:26.077Z,1509697346.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:26.114Z,1509697346.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:26.477Z,1509697346.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:26.492Z,1509697346.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:26.878Z,1509697346.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:26.909Z,1509697346.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:27.268Z,1509697347.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:27.283Z,1509697347.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:27.665Z,1509697347.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:27.680Z,1509697347.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:28.082Z,1509697348.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:28.110Z,1509697348.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:28.474Z,1509697348.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:28.489Z,1509697348.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:28.869Z,1509697348.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:28.890Z,1509697348.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:29.268Z,1509697349.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:29.283Z,1509697349.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:29.668Z,1509697349.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:29.683Z,1509697349.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:30.081Z,1509697350.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:30.112Z,1509697350.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:30.482Z,1509697350.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:30.508Z,1509697350.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:30.874Z,1509697350.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:30.910Z,1509697350.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:31.270Z,1509697351.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:31.285Z,1509697351.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:31.668Z,1509697351.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:31.683Z,1509697351.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:32.074Z,1509697352.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:32.089Z,1509697352.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:32.481Z,1509697352.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:32.511Z,1509697352.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:32.882Z,1509697352.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:32.908Z,1509697352.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:33.270Z,1509697353.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:33.285Z,1509697353.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:33.670Z,1509697353.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:33.684Z,1509697353.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:34.082Z,1509697354.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:34.111Z,1509697354.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:34.474Z,1509697354.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:34.489Z,1509697354.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:34.881Z,1509697354.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:34.913Z,1509697354.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:35.270Z,1509697355.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:35.285Z,1509697355.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:35.667Z,1509697355.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:35.687Z,1509697355.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:36.078Z,1509697356.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:36.093Z,1509697356.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:36.479Z,1509697356.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:36.494Z,1509697356.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:36.876Z,1509697356.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:36.951Z,1509697356.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:37.261Z,1509697357.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:37.288Z,1509697357.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:37.660Z,1509697357.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:37.687Z,1509697357.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:38.081Z,1509697358.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:38.135Z,1509697358.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:38.486Z,1509697358.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:38.502Z,1509697358.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:38.877Z,1509697358.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:38.934Z,1509697358.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:39.261Z,1509697359.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:39.326Z,1509697359.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:39.663Z,1509697359.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:39.689Z,1509697359.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:40.082Z,1509697360.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:40.097Z,1509697360.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:40.481Z,1509697360.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:40.496Z,1509697360.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:40.881Z,1509697360.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:40.896Z,1509697360.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:41.264Z,1509697361.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:41.289Z,1509697361.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:41.660Z,1509697361.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:41.686Z,1509697361.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:42.081Z,1509697362.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:42.096Z,1509697362.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:42.481Z,1509697362.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:42.496Z,1509697362.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:42.882Z,1509697362.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:42.897Z,1509697362.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:43.263Z,1509697363.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:43.289Z,1509697363.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:43.660Z,1509697363.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:43.686Z,1509697363.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:44.081Z,1509697364.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:44.096Z,1509697364.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:44.486Z,1509697364.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:44.500Z,1509697364.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:44.881Z,1509697364.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:44.896Z,1509697364.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:45.261Z,1509697365.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:45.295Z,1509697365.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:45.660Z,1509697365.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:45.686Z,1509697365.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:46.081Z,1509697366.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:46.096Z,1509697366.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:46.481Z,1509697366.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:46.497Z,1509697366.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:46.879Z,1509697366.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:46.907Z,1509697366.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:47.262Z,1509697367.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:47.288Z,1509697367.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:47.660Z,1509697367.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:47.686Z,1509697367.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:48.081Z,1509697368.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:48.096Z,1509697368.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:48.482Z,1509697368.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:48.497Z,1509697368.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:48.882Z,1509697368.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:48.897Z,1509697368.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:49.274Z,1509697369.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:49.289Z,1509697369.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:49.664Z,1509697369.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:49.689Z,1509697369.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:50.082Z,1509697370.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:50.097Z,1509697370.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:50.483Z,1509697370.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:50.502Z,1509697370.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:50.883Z,1509697370.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:50.903Z,1509697370.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:51.261Z,1509697371.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:51.335Z,1509697371.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:51.660Z,1509697371.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:51.686Z,1509697371.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:52.080Z,1509697372.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:52.096Z,1509697372.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:52.481Z,1509697372.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:52.497Z,1509697372.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:52.882Z,1509697372.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:52.897Z,1509697372.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:53.261Z,1509697373.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:53.294Z,1509697373.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:53.660Z,1509697373.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:53.685Z,1509697373.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:54.085Z,1509697374.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:54.107Z,1509697374.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:54.485Z,1509697374.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:54.493Z,1509697374.493 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:22:54.493Z,1509697374.493 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:22:54.493Z,1509697374.493 [BPC1](ERROR): Communications Fault
2017-11-03T08:22:54.501Z,1509697374.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:54.577Z,1509697374.577 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:22:54.882Z,1509697374.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:54.897Z,1509697374.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:55.261Z,1509697375.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:55.289Z,1509697375.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:55.663Z,1509697375.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:55.688Z,1509697375.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:55.781Z,1509697375.781 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:22:55.781Z,1509697375.781 [BPC1] No Fault, FailCount= 1
2017-11-03T08:22:56.081Z,1509697376.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:56.154Z,1509697376.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:56.482Z,1509697376.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:56.496Z,1509697376.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:56.881Z,1509697376.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:56.896Z,1509697376.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:57.264Z,1509697377.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:57.289Z,1509697377.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:57.656Z,1509697377.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:57.691Z,1509697377.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:58.082Z,1509697378.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:58.097Z,1509697378.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:58.481Z,1509697378.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:58.497Z,1509697378.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:58.882Z,1509697378.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:58.902Z,1509697378.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:59.264Z,1509697379.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:59.294Z,1509697379.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:22:59.660Z,1509697379.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:22:59.695Z,1509697379.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:00.082Z,1509697380.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:00.097Z,1509697380.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:00.484Z,1509697380.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:00.539Z,1509697380.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:00.881Z,1509697380.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:00.896Z,1509697380.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:01.261Z,1509697381.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:01.295Z,1509697381.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:01.660Z,1509697381.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:01.693Z,1509697381.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:02.082Z,1509697382.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:02.097Z,1509697382.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:02.482Z,1509697382.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:02.497Z,1509697382.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:02.882Z,1509697382.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:02.897Z,1509697382.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:03.261Z,1509697383.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:03.292Z,1509697383.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:03.656Z,1509697383.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:03.671Z,1509697383.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:04.073Z,1509697384.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:04.107Z,1509697384.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:04.473Z,1509697384.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:04.507Z,1509697384.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:04.886Z,1509697384.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:04.901Z,1509697384.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:05.263Z,1509697385.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:05.297Z,1509697385.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:05.660Z,1509697385.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:05.697Z,1509697385.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:06.073Z,1509697386.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:06.106Z,1509697386.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:06.474Z,1509697386.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:06.506Z,1509697386.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:06.874Z,1509697386.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:06.900Z,1509697386.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:09.990Z,1509697389.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:10.011Z,1509697390.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:10.160Z,1509697390.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:10.175Z,1509697390.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:10.569Z,1509697390.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:10.594Z,1509697390.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:10.973Z,1509697390.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:11.003Z,1509697391.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:11.370Z,1509697391.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:11.419Z,1509697391.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:11.756Z,1509697391.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:11.771Z,1509697391.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:12.156Z,1509697392.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:12.171Z,1509697392.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:12.556Z,1509697392.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:12.615Z,1509697392.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:12.956Z,1509697392.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:12.994Z,1509697392.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:13.369Z,1509697393.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:13.415Z,1509697393.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:13.769Z,1509697393.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:13.826Z,1509697393.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:14.173Z,1509697394.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:14.203Z,1509697394.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:14.556Z,1509697394.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:14.570Z,1509697394.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:14.956Z,1509697394.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:14.971Z,1509697394.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:15.357Z,1509697395.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:15.395Z,1509697395.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:15.756Z,1509697395.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:15.771Z,1509697395.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:16.170Z,1509697396.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:16.200Z,1509697396.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:16.569Z,1509697396.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:16.600Z,1509697396.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:16.969Z,1509697396.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:17.001Z,1509697397.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:17.358Z,1509697397.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:17.373Z,1509697397.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:17.763Z,1509697397.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:17.799Z,1509697397.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:18.163Z,1509697398.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:18.177Z,1509697398.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:18.564Z,1509697398.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:18.602Z,1509697398.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:18.960Z,1509697398.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:18.975Z,1509697398.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:19.373Z,1509697399.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:19.399Z,1509697399.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:19.777Z,1509697399.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:19.807Z,1509697399.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:20.173Z,1509697400.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:20.198Z,1509697400.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:20.561Z,1509697400.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:20.576Z,1509697400.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:20.963Z,1509697400.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:20.999Z,1509697400.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:21.358Z,1509697401.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:21.373Z,1509697401.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:21.762Z,1509697401.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:21.776Z,1509697401.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:22.170Z,1509697402.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:22.202Z,1509697402.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:22.574Z,1509697402.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:22.605Z,1509697402.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:22.978Z,1509697402.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:23.013Z,1509697403.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:23.360Z,1509697403.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:23.377Z,1509697403.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:23.765Z,1509697403.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:23.781Z,1509697403.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:24.164Z,1509697404.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:24.180Z,1509697404.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:24.564Z,1509697404.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:24.633Z,1509697404.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:24.962Z,1509697404.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:24.981Z,1509697404.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:25.377Z,1509697405.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:25.413Z,1509697405.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:25.766Z,1509697405.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:25.781Z,1509697405.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:26.177Z,1509697406.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:26.232Z,1509697406.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:26.564Z,1509697406.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:26.578Z,1509697406.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:26.964Z,1509697406.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:26.979Z,1509697406.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:27.365Z,1509697407.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:27.422Z,1509697407.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:27.764Z,1509697407.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:27.778Z,1509697407.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:28.170Z,1509697408.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:28.223Z,1509697408.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:28.569Z,1509697408.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:28.584Z,1509697408.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:28.972Z,1509697408.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:29.013Z,1509697409.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:29.366Z,1509697409.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:29.381Z,1509697409.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:29.766Z,1509697409.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:29.781Z,1509697409.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:30.165Z,1509697410.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:30.180Z,1509697410.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:30.567Z,1509697410.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:30.587Z,1509697410.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:30.964Z,1509697410.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:30.979Z,1509697410.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:31.369Z,1509697411.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:31.383Z,1509697411.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:31.773Z,1509697411.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:31.789Z,1509697411.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:32.169Z,1509697412.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:32.184Z,1509697412.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:32.567Z,1509697412.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:32.581Z,1509697412.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:32.966Z,1509697412.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:32.981Z,1509697412.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:33.365Z,1509697413.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:33.387Z,1509697413.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:33.766Z,1509697413.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:33.781Z,1509697413.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:34.175Z,1509697414.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:34.202Z,1509697414.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:34.572Z,1509697414.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:34.587Z,1509697414.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:34.973Z,1509697414.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:34.994Z,1509697414.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:35.361Z,1509697415.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:35.376Z,1509697415.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:35.765Z,1509697415.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:35.781Z,1509697415.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:36.168Z,1509697416.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:36.182Z,1509697416.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:36.568Z,1509697416.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:36.583Z,1509697416.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:36.967Z,1509697416.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:36.983Z,1509697416.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:37.374Z,1509697417.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:37.394Z,1509697417.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:37.774Z,1509697417.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:37.789Z,1509697417.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:38.172Z,1509697418.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:38.188Z,1509697418.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:38.568Z,1509697418.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:38.583Z,1509697418.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:38.967Z,1509697418.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:38.987Z,1509697418.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:39.366Z,1509697419.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:39.422Z,1509697419.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:39.771Z,1509697419.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:39.786Z,1509697419.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:40.177Z,1509697420.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:40.191Z,1509697420.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:40.576Z,1509697420.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:40.591Z,1509697420.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:40.977Z,1509697420.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:41.035Z,1509697421.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:41.361Z,1509697421.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:41.377Z,1509697421.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:41.764Z,1509697421.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:41.819Z,1509697421.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:42.168Z,1509697422.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:42.182Z,1509697422.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:42.568Z,1509697422.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:42.626Z,1509697422.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:42.966Z,1509697422.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:43.019Z,1509697423.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:43.377Z,1509697423.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:43.392Z,1509697423.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:43.776Z,1509697423.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:43.792Z,1509697423.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:44.176Z,1509697424.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:44.191Z,1509697424.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:44.568Z,1509697424.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:44.583Z,1509697424.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:44.967Z,1509697424.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:44.982Z,1509697424.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:45.365Z,1509697425.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:45.380Z,1509697425.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:45.768Z,1509697425.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:45.783Z,1509697425.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:46.176Z,1509697426.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:46.191Z,1509697426.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:46.576Z,1509697426.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:46.599Z,1509697426.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:46.977Z,1509697426.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:46.992Z,1509697426.992 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:46.992Z,1509697426.992 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 163
2017-11-03T08:23:46.992Z,1509697426.992 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:23:46.994Z,1509697426.994 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:46.994Z,1509697426.994 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 163
2017-11-03T08:23:46.994Z,1509697426.994 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:23:46.996Z,1509697426.996 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:46.996Z,1509697426.996 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 163
2017-11-03T08:23:46.996Z,1509697426.996 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:23:47.116Z,1509697427.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:23:47.116Z,1509697427.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:23:47.117Z,1509697427.117 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:23:47.359Z,1509697427.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:47.469Z,1509697427.469 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:23:47.469Z,1509697427.469 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 163
2017-11-03T08:23:47.469Z,1509697427.469 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:23:47.469Z,1509697427.469 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 163
2017-11-03T08:23:47.470Z,1509697427.470 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:23:47.470Z,1509697427.470 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 163
2017-11-03T08:23:47.755Z,1509697427.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:47.779Z,1509697427.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:23:47.780Z,1509697427.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:23:47.780Z,1509697427.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:23:47.781Z,1509697427.781 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:23:47.781Z,1509697427.781 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:23:47.781Z,1509697427.781 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:23:47.782Z,1509697427.782 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:23:47.782Z,1509697427.782 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:23:47.783Z,1509697427.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:23:48.155Z,1509697428.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:48.190Z,1509697428.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:23:48.191Z,1509697428.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:48.553Z,1509697428.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:48.568Z,1509697428.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:23:48.585Z,1509697428.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:48.956Z,1509697428.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:48.970Z,1509697428.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:23:48.971Z,1509697428.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:49.369Z,1509697429.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:49.398Z,1509697429.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:23:49.399Z,1509697429.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:49.770Z,1509697429.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:49.798Z,1509697429.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:23:49.799Z,1509697429.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:50.178Z,1509697430.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:50.192Z,1509697430.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:23:50.193Z,1509697430.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:50.557Z,1509697430.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:50.572Z,1509697430.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:23:50.589Z,1509697430.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:50.957Z,1509697430.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:50.971Z,1509697430.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:23:50.972Z,1509697430.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:51.357Z,1509697431.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:51.372Z,1509697431.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:23:51.373Z,1509697431.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:51.757Z,1509697431.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:51.771Z,1509697431.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:23:51.772Z,1509697431.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:52.174Z,1509697432.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:52.204Z,1509697432.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:23:52.205Z,1509697432.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:52.574Z,1509697432.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:52.603Z,1509697432.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:23:52.604Z,1509697432.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:52.973Z,1509697432.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:53.004Z,1509697433.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:23:53.005Z,1509697433.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:53.361Z,1509697433.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:53.375Z,1509697433.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:23:53.376Z,1509697433.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:53.760Z,1509697433.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:53.822Z,1509697433.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:23:53.823Z,1509697433.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:54.161Z,1509697434.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:54.175Z,1509697434.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:23:54.176Z,1509697434.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:54.561Z,1509697434.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:54.575Z,1509697434.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:23:54.576Z,1509697434.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:54.960Z,1509697434.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:54.975Z,1509697434.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:23:54.976Z,1509697434.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:55.377Z,1509697435.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:55.407Z,1509697435.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:23:55.408Z,1509697435.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:55.774Z,1509697435.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:55.807Z,1509697435.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T08:23:55.809Z,1509697435.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:56.174Z,1509697436.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:56.188Z,1509697436.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:23:56.209Z,1509697436.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:56.566Z,1509697436.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:56.581Z,1509697436.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:23:56.582Z,1509697436.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:56.965Z,1509697436.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:56.980Z,1509697436.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:23:56.981Z,1509697436.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:57.366Z,1509697437.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:57.386Z,1509697437.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:23:57.387Z,1509697437.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:57.766Z,1509697437.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:57.780Z,1509697437.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:23:57.781Z,1509697437.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:58.170Z,1509697438.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:58.178Z,1509697438.178 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:23:58.178Z,1509697438.178 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:23:58.178Z,1509697438.178 [BPC1](ERROR): Communications Fault
2017-11-03T08:23:58.186Z,1509697438.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:23:58.186Z,1509697438.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:58.301Z,1509697438.301 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:23:58.573Z,1509697438.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:58.589Z,1509697438.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:23:58.590Z,1509697438.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:58.970Z,1509697438.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:58.990Z,1509697438.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:23:58.991Z,1509697438.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:59.367Z,1509697439.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:59.386Z,1509697439.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:23:59.387Z,1509697439.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:23:59.485Z,1509697439.485 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:23:59.485Z,1509697439.485 [BPC1] No Fault, FailCount= 1
2017-11-03T08:23:59.767Z,1509697439.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:23:59.842Z,1509697439.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T08:23:59.843Z,1509697439.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:00.169Z,1509697440.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:00.184Z,1509697440.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:24:00.185Z,1509697440.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:00.566Z,1509697440.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:00.614Z,1509697440.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:24:00.615Z,1509697440.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:00.967Z,1509697440.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:00.982Z,1509697440.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:24:00.983Z,1509697440.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:01.374Z,1509697441.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:01.389Z,1509697441.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:24:01.389Z,1509697441.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:01.770Z,1509697441.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:01.785Z,1509697441.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:24:01.786Z,1509697441.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:02.171Z,1509697442.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:02.190Z,1509697442.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:24:02.191Z,1509697442.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:02.569Z,1509697442.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:02.583Z,1509697442.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:24:02.584Z,1509697442.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:02.967Z,1509697442.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:02.986Z,1509697442.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:24:02.987Z,1509697442.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:03.368Z,1509697443.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:03.384Z,1509697443.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:24:03.385Z,1509697443.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:03.761Z,1509697443.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:03.776Z,1509697443.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:24:03.778Z,1509697443.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:04.170Z,1509697444.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:04.186Z,1509697444.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:24:04.187Z,1509697444.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:04.573Z,1509697444.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:04.591Z,1509697444.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:24:04.592Z,1509697444.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:04.973Z,1509697444.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:04.988Z,1509697444.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:24:04.990Z,1509697444.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:05.366Z,1509697445.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:05.381Z,1509697445.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:24:05.382Z,1509697445.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:05.766Z,1509697445.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:05.781Z,1509697445.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:24:05.781Z,1509697445.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:06.166Z,1509697446.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:06.180Z,1509697446.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:24:06.181Z,1509697446.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:06.567Z,1509697446.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:06.586Z,1509697446.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:24:06.587Z,1509697446.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:06.967Z,1509697446.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:06.986Z,1509697446.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T08:24:06.987Z,1509697446.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:10.093Z,1509697450.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:10.118Z,1509697450.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:10.271Z,1509697450.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:10.308Z,1509697450.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:10.667Z,1509697450.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:10.687Z,1509697450.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:11.044Z,1509697451.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:11.072Z,1509697451.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:11.456Z,1509697451.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:11.531Z,1509697451.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:11.844Z,1509697451.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:11.879Z,1509697451.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:12.270Z,1509697452.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:12.286Z,1509697452.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:12.670Z,1509697452.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:12.723Z,1509697452.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:13.065Z,1509697453.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:13.082Z,1509697453.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:13.440Z,1509697453.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:13.484Z,1509697453.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:13.847Z,1509697453.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:13.915Z,1509697453.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:14.245Z,1509697454.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:14.272Z,1509697454.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:14.647Z,1509697454.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:14.673Z,1509697454.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:15.061Z,1509697455.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:15.077Z,1509697455.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:15.463Z,1509697455.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:15.483Z,1509697455.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:15.870Z,1509697455.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:15.884Z,1509697455.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:16.248Z,1509697456.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:16.273Z,1509697456.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:16.644Z,1509697456.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:16.674Z,1509697456.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:17.062Z,1509697457.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:17.077Z,1509697457.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:17.461Z,1509697457.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:17.477Z,1509697457.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:17.863Z,1509697457.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:17.883Z,1509697457.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:18.241Z,1509697458.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:18.275Z,1509697458.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:18.640Z,1509697458.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:18.671Z,1509697458.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:19.065Z,1509697459.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:19.080Z,1509697459.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:19.453Z,1509697459.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:19.478Z,1509697459.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:19.866Z,1509697459.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:19.881Z,1509697459.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:20.247Z,1509697460.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:20.278Z,1509697460.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:20.647Z,1509697460.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:20.678Z,1509697460.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:21.053Z,1509697461.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:21.087Z,1509697461.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:21.466Z,1509697461.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:21.481Z,1509697461.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:21.870Z,1509697461.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:21.890Z,1509697461.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:22.242Z,1509697462.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:22.269Z,1509697462.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:22.645Z,1509697462.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:22.660Z,1509697462.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:23.057Z,1509697463.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:23.086Z,1509697463.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:23.469Z,1509697463.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:23.484Z,1509697463.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:23.868Z,1509697463.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:23.883Z,1509697463.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:24.252Z,1509697464.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:24.281Z,1509697464.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:24.651Z,1509697464.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:24.735Z,1509697464.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:25.058Z,1509697465.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:25.082Z,1509697465.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:25.472Z,1509697465.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:25.511Z,1509697465.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:25.858Z,1509697465.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:25.882Z,1509697465.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:26.252Z,1509697466.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:26.299Z,1509697466.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:26.643Z,1509697466.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:26.695Z,1509697466.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:27.057Z,1509697467.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:27.082Z,1509697467.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:27.457Z,1509697467.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:27.482Z,1509697467.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:27.857Z,1509697467.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:27.891Z,1509697467.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:28.244Z,1509697468.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:28.286Z,1509697468.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:28.643Z,1509697468.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:28.663Z,1509697468.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:29.057Z,1509697469.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:29.082Z,1509697469.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:29.457Z,1509697469.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:29.482Z,1509697469.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:29.857Z,1509697469.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:29.882Z,1509697469.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:30.244Z,1509697470.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:30.258Z,1509697470.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:30.644Z,1509697470.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:30.659Z,1509697470.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:31.057Z,1509697471.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:31.082Z,1509697471.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:31.457Z,1509697471.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:31.483Z,1509697471.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:31.861Z,1509697471.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:31.891Z,1509697471.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:32.244Z,1509697472.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:32.259Z,1509697472.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:32.651Z,1509697472.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:32.686Z,1509697472.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:33.061Z,1509697473.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:33.091Z,1509697473.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:33.461Z,1509697473.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:33.491Z,1509697473.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:33.857Z,1509697473.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:33.883Z,1509697473.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:34.244Z,1509697474.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:34.267Z,1509697474.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:34.647Z,1509697474.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:34.667Z,1509697474.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:35.061Z,1509697475.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:35.094Z,1509697475.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:35.461Z,1509697475.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:35.486Z,1509697475.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:35.862Z,1509697475.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:35.885Z,1509697475.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:36.256Z,1509697476.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:36.290Z,1509697476.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:36.648Z,1509697476.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:36.667Z,1509697476.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:37.061Z,1509697477.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:37.086Z,1509697477.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:37.457Z,1509697477.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:37.551Z,1509697477.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:37.861Z,1509697477.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:37.886Z,1509697477.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:38.248Z,1509697478.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:38.303Z,1509697478.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:38.643Z,1509697478.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:38.658Z,1509697478.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:39.061Z,1509697479.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:39.118Z,1509697479.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:39.461Z,1509697479.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:39.519Z,1509697479.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:39.857Z,1509697479.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:39.889Z,1509697479.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:40.248Z,1509697480.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:40.287Z,1509697480.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:40.648Z,1509697480.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:40.663Z,1509697480.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:41.061Z,1509697481.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:41.087Z,1509697481.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:41.465Z,1509697481.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:41.495Z,1509697481.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:41.861Z,1509697481.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:41.886Z,1509697481.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:42.250Z,1509697482.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:42.265Z,1509697482.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:42.644Z,1509697482.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:42.659Z,1509697482.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:43.061Z,1509697483.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:43.086Z,1509697483.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:43.465Z,1509697483.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:43.488Z,1509697483.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:43.862Z,1509697483.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:43.891Z,1509697483.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:44.249Z,1509697484.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:44.287Z,1509697484.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:44.651Z,1509697484.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:44.666Z,1509697484.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:45.061Z,1509697485.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:45.085Z,1509697485.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:45.465Z,1509697485.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:45.495Z,1509697485.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:45.857Z,1509697485.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:45.884Z,1509697485.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:46.248Z,1509697486.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:46.263Z,1509697486.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:46.649Z,1509697486.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:46.664Z,1509697486.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:47.061Z,1509697487.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:47.096Z,1509697487.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:47.462Z,1509697487.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:47.493Z,1509697487.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:47.862Z,1509697487.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:47.896Z,1509697487.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:48.250Z,1509697488.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:48.270Z,1509697488.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:48.648Z,1509697488.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:48.664Z,1509697488.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:49.063Z,1509697489.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:49.098Z,1509697489.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:49.466Z,1509697489.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:49.496Z,1509697489.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:49.858Z,1509697489.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:49.895Z,1509697489.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:50.252Z,1509697490.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:50.330Z,1509697490.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:50.653Z,1509697490.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:50.667Z,1509697490.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:51.060Z,1509697491.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:51.107Z,1509697491.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:51.460Z,1509697491.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:51.479Z,1509697491.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:51.861Z,1509697491.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:51.903Z,1509697491.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:52.255Z,1509697492.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:52.307Z,1509697492.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:52.652Z,1509697492.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:52.667Z,1509697492.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:53.060Z,1509697493.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:53.075Z,1509697493.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:53.460Z,1509697493.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:53.483Z,1509697493.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:53.860Z,1509697493.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:53.882Z,1509697493.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:54.255Z,1509697494.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:54.270Z,1509697494.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:54.654Z,1509697494.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:54.675Z,1509697494.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:55.059Z,1509697495.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:55.079Z,1509697495.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:55.460Z,1509697495.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:55.482Z,1509697495.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:55.860Z,1509697495.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:55.875Z,1509697495.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:56.253Z,1509697496.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:56.268Z,1509697496.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:56.649Z,1509697496.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:56.663Z,1509697496.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:57.060Z,1509697497.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:57.075Z,1509697497.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:57.459Z,1509697497.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:57.479Z,1509697497.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:57.861Z,1509697497.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:57.882Z,1509697497.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:58.256Z,1509697498.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:58.271Z,1509697498.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:58.653Z,1509697498.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:58.668Z,1509697498.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:59.060Z,1509697499.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:59.075Z,1509697499.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:59.460Z,1509697499.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:59.475Z,1509697499.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:24:59.860Z,1509697499.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:24:59.883Z,1509697499.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:00.254Z,1509697500.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:00.269Z,1509697500.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:00.652Z,1509697500.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:00.667Z,1509697500.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:01.060Z,1509697501.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:01.075Z,1509697501.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:01.461Z,1509697501.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:01.475Z,1509697501.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:01.860Z,1509697501.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:01.883Z,1509697501.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:02.257Z,1509697502.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:02.272Z,1509697502.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:02.654Z,1509697502.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:02.668Z,1509697502.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:03.061Z,1509697503.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:03.121Z,1509697503.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:03.460Z,1509697503.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:03.522Z,1509697503.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:03.861Z,1509697503.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:03.876Z,1509697503.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:04.256Z,1509697504.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:04.271Z,1509697504.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:04.652Z,1509697504.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:04.706Z,1509697504.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:05.060Z,1509697505.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:05.082Z,1509697505.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:05.459Z,1509697505.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:05.514Z,1509697505.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:05.859Z,1509697505.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:05.923Z,1509697505.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:06.255Z,1509697506.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:06.270Z,1509697506.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:06.654Z,1509697506.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:06.675Z,1509697506.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:06.679Z,1509697506.679 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T08:20:06.6Z
2017-11-03T08:25:06.679Z,1509697506.679 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T08:25:06.679Z,1509697506.679 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T08:25:07.062Z,1509697507.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:07.077Z,1509697507.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:10.257Z,1509697510.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:10.272Z,1509697510.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:10.352Z,1509697510.352 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:25:10.353Z,1509697510.353 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T08:25:10.368Z,1509697510.368 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0192.lzma
2017-11-03T08:25:10.427Z,1509697510.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:10.450Z,1509697510.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:10.518Z,1509697510.518 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:25:10.519Z,1509697510.519 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:25:10.519Z,1509697510.519 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:25:10.519Z,1509697510.519 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:25:10.798Z,1509697510.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:10.832Z,1509697510.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:11.167Z,1509697511.167 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0192.lzma.bak
2017-11-03T08:25:11.167Z,1509697511.167 [DataOverHttps](INFO): SBD MOMSN=5183121
2017-11-03T08:25:11.205Z,1509697511.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:11.231Z,1509697511.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:11.823Z,1509697511.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:11.839Z,1509697511.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:11.999Z,1509697511.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:12.027Z,1509697512.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:14.693Z,1509697514.693 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:25:14.795Z,1509697514.795 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:25:14.796Z,1509697514.796 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:25:14.797Z,1509697514.797 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:25:14.797Z,1509697514.797 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:25:15.270Z,1509697515.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:15.287Z,1509697515.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:15.426Z,1509697515.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:15.459Z,1509697515.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:15.826Z,1509697515.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:15.841Z,1509697515.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:16.217Z,1509697516.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:16.232Z,1509697516.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:16.612Z,1509697516.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:16.655Z,1509697516.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:17.017Z,1509697517.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:17.059Z,1509697517.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:20.182Z,1509697520.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:20.199Z,1509697520.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:20.788Z,1509697520.788 [DataOverHttps](INFO): Sending 252 bytes from file Logs/20171103T001125/Express0193.lzma
2017-11-03T08:25:20.832Z,1509697520.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:20.878Z,1509697520.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:21.022Z,1509697521.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:21.055Z,1509697521.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:21.614Z,1509697521.614 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0193.lzma.bak
2017-11-03T08:25:21.614Z,1509697521.614 [DataOverHttps](INFO): SBD MOMSN=5183123
2017-11-03T08:25:21.660Z,1509697521.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:21.703Z,1509697521.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:22.380Z,1509697522.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:22.477Z,1509697522.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:22.492Z,1509697522.492 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T08:25:22.492Z,1509697522.492 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T08:25:22.492Z,1509697522.492 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T08:25:22.638Z,1509697522.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:22.674Z,1509697522.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:25.858Z,1509697525.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:25.883Z,1509697525.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:26.034Z,1509697526.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:26.049Z,1509697526.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:26.427Z,1509697526.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:26.442Z,1509697526.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:26.818Z,1509697526.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:26.857Z,1509697526.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:27.204Z,1509697527.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:27.246Z,1509697527.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:27.604Z,1509697527.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:27.637Z,1509697527.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:28.009Z,1509697528.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:28.078Z,1509697528.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:28.422Z,1509697528.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:28.455Z,1509697528.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:28.822Z,1509697528.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:28.851Z,1509697528.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:29.224Z,1509697529.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:29.258Z,1509697529.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:29.610Z,1509697529.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:29.627Z,1509697529.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:30.006Z,1509697530.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:30.034Z,1509697530.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:30.414Z,1509697530.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:30.434Z,1509697530.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:30.817Z,1509697530.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:30.833Z,1509697530.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:31.223Z,1509697531.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:31.239Z,1509697531.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:31.621Z,1509697531.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:31.660Z,1509697531.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:32.022Z,1509697532.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:32.041Z,1509697532.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:32.415Z,1509697532.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:32.432Z,1509697532.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:32.815Z,1509697532.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:32.866Z,1509697532.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:33.207Z,1509697533.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:33.250Z,1509697533.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:33.605Z,1509697533.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:33.636Z,1509697533.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:34.003Z,1509697534.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:34.034Z,1509697534.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:34.427Z,1509697534.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:34.482Z,1509697534.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:34.825Z,1509697534.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:34.859Z,1509697534.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:35.225Z,1509697535.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:35.239Z,1509697535.239 [PNI_TCM](ERROR): CRC does not match. Expected:0x34861 got:0x2471
2017-11-03T08:25:35.283Z,1509697535.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:35.607Z,1509697535.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:35.678Z,1509697535.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:36.040Z,1509697536.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:36.055Z,1509697536.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:36.406Z,1509697536.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:36.450Z,1509697536.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:36.807Z,1509697536.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:36.837Z,1509697536.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:37.230Z,1509697537.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:37.245Z,1509697537.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:37.631Z,1509697537.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:37.646Z,1509697537.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:38.023Z,1509697538.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:38.055Z,1509697538.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:38.403Z,1509697538.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:38.433Z,1509697538.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:38.805Z,1509697538.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:38.845Z,1509697538.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:39.207Z,1509697539.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:39.239Z,1509697539.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:39.607Z,1509697539.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:39.640Z,1509697539.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:40.004Z,1509697540.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:40.035Z,1509697540.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:40.431Z,1509697540.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:40.446Z,1509697540.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:40.832Z,1509697540.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:40.847Z,1509697540.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:41.217Z,1509697541.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:41.249Z,1509697541.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:41.598Z,1509697541.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:41.650Z,1509697541.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:42.020Z,1509697542.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:42.035Z,1509697542.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:42.419Z,1509697542.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:42.439Z,1509697542.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:42.818Z,1509697542.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:42.861Z,1509697542.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:43.223Z,1509697543.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:43.241Z,1509697543.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:43.627Z,1509697543.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:43.642Z,1509697543.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:44.016Z,1509697544.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:44.047Z,1509697544.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:44.407Z,1509697544.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:44.454Z,1509697544.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:44.803Z,1509697544.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:44.818Z,1509697544.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:45.204Z,1509697545.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:45.224Z,1509697545.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:45.610Z,1509697545.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:45.651Z,1509697545.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:46.019Z,1509697546.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:46.066Z,1509697546.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:46.429Z,1509697546.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:46.479Z,1509697546.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:46.820Z,1509697546.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:46.835Z,1509697546.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:47.226Z,1509697547.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:47.254Z,1509697547.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:47.608Z,1509697547.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:47.686Z,1509697547.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:48.006Z,1509697548.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:48.043Z,1509697548.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:48.415Z,1509697548.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:48.437Z,1509697548.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:48.826Z,1509697548.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:48.879Z,1509697548.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:49.225Z,1509697549.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:49.270Z,1509697549.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:49.631Z,1509697549.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:49.638Z,1509697549.638 [PNI_TCM](ERROR): CRC does not match. Expected:0x30287 got:0x3628
2017-11-03T08:25:49.684Z,1509697549.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:50.035Z,1509697550.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:50.083Z,1509697550.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:50.417Z,1509697550.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:50.433Z,1509697550.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:50.814Z,1509697550.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:50.850Z,1509697550.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:51.216Z,1509697551.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:51.235Z,1509697551.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:51.620Z,1509697551.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:51.635Z,1509697551.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:52.018Z,1509697552.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:52.037Z,1509697552.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:52.417Z,1509697552.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:52.450Z,1509697552.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:52.828Z,1509697552.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:52.843Z,1509697552.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:53.230Z,1509697553.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:53.245Z,1509697553.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:53.618Z,1509697553.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:53.634Z,1509697553.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:54.012Z,1509697554.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:54.046Z,1509697554.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:54.404Z,1509697554.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:54.435Z,1509697554.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:54.849Z,1509697554.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:54.869Z,1509697554.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:55.223Z,1509697555.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:55.247Z,1509697555.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:55.625Z,1509697555.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:55.726Z,1509697555.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:56.010Z,1509697556.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:56.050Z,1509697556.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:56.412Z,1509697556.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:56.430Z,1509697556.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:56.811Z,1509697556.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:56.831Z,1509697556.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:57.211Z,1509697557.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:57.255Z,1509697557.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:57.639Z,1509697557.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:57.750Z,1509697557.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:58.019Z,1509697558.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:58.065Z,1509697558.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:58.428Z,1509697558.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:58.461Z,1509697558.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:58.827Z,1509697558.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:58.882Z,1509697558.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:59.234Z,1509697559.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:59.265Z,1509697559.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:25:59.610Z,1509697559.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:25:59.661Z,1509697559.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:00.017Z,1509697560.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:00.040Z,1509697560.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:00.415Z,1509697560.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:00.516Z,1509697560.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:00.815Z,1509697560.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:00.870Z,1509697560.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:01.228Z,1509697561.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:01.247Z,1509697561.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:01.631Z,1509697561.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:01.650Z,1509697561.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:02.047Z,1509697562.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:02.095Z,1509697562.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:02.413Z,1509697562.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:02.455Z,1509697562.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:02.819Z,1509697562.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:02.855Z,1509697562.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:03.207Z,1509697563.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:03.266Z,1509697563.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:03.611Z,1509697563.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:03.651Z,1509697563.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:04.058Z,1509697564.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:04.115Z,1509697564.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:04.442Z,1509697564.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:04.514Z,1509697564.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:04.835Z,1509697564.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:04.878Z,1509697564.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:05.252Z,1509697565.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:05.272Z,1509697565.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:05.613Z,1509697565.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:05.663Z,1509697565.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:06.015Z,1509697566.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:06.029Z,1509697566.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x30633 got:0x49817
2017-11-03T08:26:06.067Z,1509697566.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:06.415Z,1509697566.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:06.453Z,1509697566.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:06.818Z,1509697566.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:06.874Z,1509697566.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:07.228Z,1509697567.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:07.251Z,1509697567.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:07.646Z,1509697567.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:07.674Z,1509697567.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:08.018Z,1509697568.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:08.059Z,1509697568.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:08.411Z,1509697568.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:08.457Z,1509697568.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:08.812Z,1509697568.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:08.838Z,1509697568.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:09.216Z,1509697569.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:09.261Z,1509697569.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:09.616Z,1509697569.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:09.725Z,1509697569.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:10.013Z,1509697570.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:10.071Z,1509697570.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:10.416Z,1509697570.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:10.463Z,1509697570.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:10.834Z,1509697570.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:10.862Z,1509697570.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:11.222Z,1509697571.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:11.273Z,1509697571.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:11.614Z,1509697571.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:11.650Z,1509697571.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:12.035Z,1509697572.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:12.074Z,1509697572.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:12.418Z,1509697572.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:12.442Z,1509697572.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:12.817Z,1509697572.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:12.841Z,1509697572.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:13.218Z,1509697573.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:13.262Z,1509697573.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:13.626Z,1509697573.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:13.714Z,1509697573.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:14.027Z,1509697574.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:14.055Z,1509697574.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:14.433Z,1509697574.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:14.485Z,1509697574.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:14.815Z,1509697574.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:14.855Z,1509697574.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:15.215Z,1509697575.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:15.299Z,1509697575.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:15.605Z,1509697575.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:15.644Z,1509697575.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:16.010Z,1509697576.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:16.060Z,1509697576.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:16.420Z,1509697576.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:16.486Z,1509697576.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:16.829Z,1509697576.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:16.850Z,1509697576.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:17.220Z,1509697577.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:17.249Z,1509697577.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:17.606Z,1509697577.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:17.666Z,1509697577.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:18.013Z,1509697578.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:18.082Z,1509697578.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:18.405Z,1509697578.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:18.475Z,1509697578.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:18.806Z,1509697578.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:18.879Z,1509697578.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:19.226Z,1509697579.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:19.251Z,1509697579.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:19.631Z,1509697579.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:19.654Z,1509697579.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:20.047Z,1509697580.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:20.063Z,1509697580.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:20.408Z,1509697580.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:20.441Z,1509697580.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:20.810Z,1509697580.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:20.817Z,1509697580.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x57666 got:0x43805
2017-11-03T08:26:20.842Z,1509697580.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:21.207Z,1509697581.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:21.245Z,1509697581.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:21.608Z,1509697581.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:21.633Z,1509697581.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:22.004Z,1509697582.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:22.024Z,1509697582.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:22.439Z,1509697582.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:22.455Z,1509697582.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:22.821Z,1509697582.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:22.860Z,1509697582.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:26.118Z,1509697586.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:26.166Z,1509697586.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:26.320Z,1509697586.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:26.367Z,1509697586.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:26.722Z,1509697586.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:26.747Z,1509697586.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:27.123Z,1509697587.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:27.149Z,1509697587.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:27.524Z,1509697587.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:27.550Z,1509697587.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:27.939Z,1509697587.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:27.959Z,1509697587.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:28.307Z,1509697588.307 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T08:26:28.307Z,1509697588.307 [NAL9602] Data Fault, FailCount= 5
2017-11-03T08:26:28.307Z,1509697588.307 [NAL9602](ERROR): Data Fault
2017-11-03T08:26:28.324Z,1509697588.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:28.359Z,1509697588.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:28.437Z,1509697588.437 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T08:26:28.437Z,1509697588.437 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T08:26:28.706Z,1509697588.706 [NAL9602](INFO): Powering down
2017-11-03T08:26:28.724Z,1509697588.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:28.756Z,1509697588.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:28.835Z,1509697588.835 [CBIT](INFO): Critical error at 20171103T082628
2017-11-03T08:26:29.115Z,1509697589.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:29.146Z,1509697589.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:29.521Z,1509697589.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:29.547Z,1509697589.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:29.939Z,1509697589.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:29.959Z,1509697589.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:30.322Z,1509697590.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:30.348Z,1509697590.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:30.720Z,1509697590.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:30.763Z,1509697590.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:31.122Z,1509697591.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:31.148Z,1509697591.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:31.515Z,1509697591.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:31.550Z,1509697591.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:31.932Z,1509697591.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:32.030Z,1509697592.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:32.322Z,1509697592.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:32.354Z,1509697592.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:32.722Z,1509697592.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:32.763Z,1509697592.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:33.120Z,1509697593.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:33.155Z,1509697593.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:33.520Z,1509697593.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:33.574Z,1509697593.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:33.922Z,1509697593.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:33.953Z,1509697593.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:34.332Z,1509697594.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:34.362Z,1509697594.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:34.716Z,1509697594.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:34.731Z,1509697594.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:35.118Z,1509697595.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:35.133Z,1509697595.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:35.521Z,1509697595.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:35.536Z,1509697595.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:35.922Z,1509697595.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:35.937Z,1509697595.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:36.325Z,1509697596.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:36.341Z,1509697596.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:36.723Z,1509697596.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:36.743Z,1509697596.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:37.122Z,1509697597.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:37.137Z,1509697597.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:37.516Z,1509697597.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:37.531Z,1509697597.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:37.918Z,1509697597.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:37.939Z,1509697597.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:38.320Z,1509697598.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:38.335Z,1509697598.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:38.715Z,1509697598.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:38.730Z,1509697598.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:39.120Z,1509697599.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:39.135Z,1509697599.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:39.522Z,1509697599.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:39.537Z,1509697599.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:39.922Z,1509697599.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:39.942Z,1509697599.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:40.322Z,1509697600.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:40.343Z,1509697600.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:40.722Z,1509697600.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:40.737Z,1509697600.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:41.115Z,1509697601.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:41.130Z,1509697601.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:41.520Z,1509697601.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:41.535Z,1509697601.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:41.922Z,1509697601.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:41.937Z,1509697601.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:42.322Z,1509697602.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:42.337Z,1509697602.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:42.722Z,1509697602.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:42.743Z,1509697602.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:43.120Z,1509697603.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:43.135Z,1509697603.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:43.534Z,1509697603.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:43.549Z,1509697603.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:43.920Z,1509697603.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:43.935Z,1509697603.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:44.322Z,1509697604.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:44.383Z,1509697604.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:44.719Z,1509697604.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:44.727Z,1509697604.727 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:26:44.727Z,1509697604.727 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:26:44.727Z,1509697604.727 [BPC1](ERROR): Data Fault
2017-11-03T08:26:44.735Z,1509697604.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:44.824Z,1509697604.824 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:26:45.121Z,1509697605.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:45.136Z,1509697605.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:45.515Z,1509697605.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:45.534Z,1509697605.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:45.932Z,1509697605.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:46.034Z,1509697606.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:46.109Z,1509697606.109 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:26:46.109Z,1509697606.109 [BPC1] No Fault, FailCount= 1
2017-11-03T08:26:46.314Z,1509697606.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:46.418Z,1509697606.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:46.718Z,1509697606.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:46.739Z,1509697606.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:47.135Z,1509697607.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:47.183Z,1509697607.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:47.519Z,1509697607.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:47.535Z,1509697607.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:47.922Z,1509697607.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:47.938Z,1509697607.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:47.938Z,1509697607.938 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 164
2017-11-03T08:26:47.938Z,1509697607.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:26:47.940Z,1509697607.940 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:47.940Z,1509697607.940 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 164
2017-11-03T08:26:47.940Z,1509697607.940 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:26:47.958Z,1509697607.958 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:47.958Z,1509697607.958 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 164
2017-11-03T08:26:47.958Z,1509697607.958 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:26:48.037Z,1509697608.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:26:48.037Z,1509697608.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:26:48.037Z,1509697608.037 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:26:48.324Z,1509697608.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:48.416Z,1509697608.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:26:48.416Z,1509697608.416 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 164
2017-11-03T08:26:48.417Z,1509697608.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:26:48.417Z,1509697608.417 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 164
2017-11-03T08:26:48.417Z,1509697608.417 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:26:48.417Z,1509697608.417 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 164
2017-11-03T08:26:48.728Z,1509697608.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:48.743Z,1509697608.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:26:48.743Z,1509697608.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:26:48.744Z,1509697608.744 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:26:48.744Z,1509697608.744 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:26:48.745Z,1509697608.745 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:26:48.745Z,1509697608.745 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:26:48.745Z,1509697608.745 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:26:48.746Z,1509697608.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:26:48.746Z,1509697608.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:26:49.128Z,1509697609.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:49.143Z,1509697609.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:49.527Z,1509697609.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:49.541Z,1509697609.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:49.923Z,1509697609.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:49.938Z,1509697609.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:50.326Z,1509697610.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:50.347Z,1509697610.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:50.725Z,1509697610.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:50.740Z,1509697610.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:51.122Z,1509697611.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:51.138Z,1509697611.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:51.527Z,1509697611.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:51.543Z,1509697611.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:51.925Z,1509697611.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:51.943Z,1509697611.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:52.326Z,1509697612.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:52.347Z,1509697612.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:52.727Z,1509697612.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:52.747Z,1509697612.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:53.122Z,1509697613.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:53.137Z,1509697613.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:53.526Z,1509697613.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:53.541Z,1509697613.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:53.934Z,1509697613.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:53.955Z,1509697613.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:54.327Z,1509697614.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:54.342Z,1509697614.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:54.728Z,1509697614.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:54.743Z,1509697614.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:55.127Z,1509697615.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:55.142Z,1509697615.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:55.529Z,1509697615.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:55.543Z,1509697615.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:55.926Z,1509697615.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:55.941Z,1509697615.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:56.327Z,1509697616.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:56.342Z,1509697616.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:56.705Z,1509697616.705 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T08:26:56.706Z,1509697616.706 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T08:26:56.706Z,1509697616.706 [DropWeight](ERROR): Hardware Fault
2017-11-03T08:26:56.742Z,1509697616.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:56.765Z,1509697616.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:56.863Z,1509697616.863 [CBIT](INFO): Critical error at 20171103T082656
2017-11-03T08:26:56.865Z,1509697616.865 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T08:26:56.865Z,1509697616.865 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T08:26:57.128Z,1509697617.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:57.142Z,1509697617.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:57.227Z,1509697617.227 [CBIT](INFO): Critical error at 20171103T082656
2017-11-03T08:26:57.528Z,1509697617.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:57.543Z,1509697617.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:57.925Z,1509697617.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:57.940Z,1509697617.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:58.327Z,1509697618.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:58.342Z,1509697618.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:58.729Z,1509697618.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:58.744Z,1509697618.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:59.128Z,1509697619.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:59.227Z,1509697619.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:59.522Z,1509697619.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:26:59.537Z,1509697619.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:26:59.950Z,1509697619.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:00.031Z,1509697620.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:00.322Z,1509697620.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:00.346Z,1509697620.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:00.715Z,1509697620.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:00.755Z,1509697620.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:01.114Z,1509697621.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:01.162Z,1509697621.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:01.522Z,1509697621.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:01.545Z,1509697621.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:01.922Z,1509697621.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:01.946Z,1509697621.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:02.318Z,1509697622.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:02.342Z,1509697622.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:02.722Z,1509697622.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:02.747Z,1509697622.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:03.122Z,1509697623.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:03.146Z,1509697623.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:03.522Z,1509697623.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:03.546Z,1509697623.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:03.922Z,1509697623.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:03.945Z,1509697623.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:04.318Z,1509697624.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:04.347Z,1509697624.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:04.722Z,1509697624.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:04.747Z,1509697624.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:05.115Z,1509697625.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:05.144Z,1509697625.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:05.515Z,1509697625.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:05.545Z,1509697625.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:05.937Z,1509697625.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:05.953Z,1509697625.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:06.319Z,1509697626.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:06.344Z,1509697626.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:06.722Z,1509697626.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:06.746Z,1509697626.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:07.120Z,1509697627.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:07.162Z,1509697627.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:07.516Z,1509697627.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:07.544Z,1509697627.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:07.918Z,1509697627.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:07.943Z,1509697627.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:08.320Z,1509697628.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:08.346Z,1509697628.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:08.722Z,1509697628.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:08.746Z,1509697628.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:09.122Z,1509697629.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:09.148Z,1509697629.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:09.520Z,1509697629.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:09.546Z,1509697629.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:09.938Z,1509697629.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:09.954Z,1509697629.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:10.322Z,1509697630.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:10.347Z,1509697630.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:10.540Z,1509697630.540 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:27:10.540Z,1509697630.540 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T08:27:10.540Z,1509697630.540 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:27:10.722Z,1509697630.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:10.747Z,1509697630.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:27:10.748Z,1509697630.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:10.849Z,1509697630.849 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:27:10.944Z,1509697630.944 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:27:11.033Z,1509697631.033 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:27:11.118Z,1509697631.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:11.151Z,1509697631.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:27:11.152Z,1509697631.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:11.522Z,1509697631.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:11.547Z,1509697631.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:27:11.547Z,1509697631.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:11.920Z,1509697631.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:11.944Z,1509697631.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:27:11.945Z,1509697631.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:12.315Z,1509697632.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:12.323Z,1509697632.323 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:27:12.324Z,1509697632.324 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:27:12.324Z,1509697632.324 [BPC1](ERROR): Data Fault
2017-11-03T08:27:12.359Z,1509697632.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:27:12.360Z,1509697632.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:12.438Z,1509697632.438 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:27:12.438Z,1509697632.438 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T08:27:12.439Z,1509697632.439 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:27:12.648Z,1509697632.648 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:27:12.649Z,1509697632.649 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:27:12.649Z,1509697632.649 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:27:12.649Z,1509697632.649 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:27:12.720Z,1509697632.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:12.757Z,1509697632.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:27:12.758Z,1509697632.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:13.120Z,1509697633.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:13.135Z,1509697633.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:27:13.135Z,1509697633.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:13.519Z,1509697633.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:13.533Z,1509697633.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:27:13.534Z,1509697633.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:13.646Z,1509697633.646 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:27:13.646Z,1509697633.646 [BPC1] No Fault, FailCount= 1
2017-11-03T08:27:13.922Z,1509697633.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:13.996Z,1509697633.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:27:13.997Z,1509697633.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:14.320Z,1509697634.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:14.362Z,1509697634.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:27:14.363Z,1509697634.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:14.722Z,1509697634.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:14.761Z,1509697634.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:27:14.762Z,1509697634.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:15.115Z,1509697635.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:15.129Z,1509697635.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:27:15.130Z,1509697635.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:15.520Z,1509697635.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:15.534Z,1509697635.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:27:15.535Z,1509697635.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:15.918Z,1509697635.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:15.933Z,1509697635.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:27:15.934Z,1509697635.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:16.318Z,1509697636.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:16.333Z,1509697636.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:27:16.333Z,1509697636.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:16.748Z,1509697636.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:16.787Z,1509697636.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:27:16.788Z,1509697636.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:16.907Z,1509697636.907 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:27:16.972Z,1509697636.972 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:27:16.973Z,1509697636.973 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:27:16.973Z,1509697636.973 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:27:16.974Z,1509697636.974 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:27:17.124Z,1509697637.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:17.142Z,1509697637.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:27:17.143Z,1509697637.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:17.526Z,1509697637.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:17.542Z,1509697637.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:17.928Z,1509697637.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:17.943Z,1509697637.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:18.322Z,1509697638.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:18.343Z,1509697638.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:18.726Z,1509697638.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:18.740Z,1509697638.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:19.123Z,1509697639.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:19.143Z,1509697639.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:19.526Z,1509697639.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:19.540Z,1509697639.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:19.924Z,1509697639.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:19.963Z,1509697639.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:20.323Z,1509697640.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:20.343Z,1509697640.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:20.769Z,1509697640.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:20.789Z,1509697640.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:21.122Z,1509697641.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:21.137Z,1509697641.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:21.523Z,1509697641.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:21.543Z,1509697641.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:21.922Z,1509697641.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:21.942Z,1509697641.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:22.326Z,1509697642.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:22.341Z,1509697642.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:22.738Z,1509697642.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:22.785Z,1509697642.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:23.126Z,1509697643.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:23.142Z,1509697643.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:26.350Z,1509697646.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:26.395Z,1509697646.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:26.539Z,1509697646.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:26.604Z,1509697646.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:26.942Z,1509697646.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:26.975Z,1509697646.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:27.357Z,1509697647.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:27.395Z,1509697647.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:27.746Z,1509697647.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:27.772Z,1509697647.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:28.143Z,1509697648.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:28.195Z,1509697648.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:28.544Z,1509697648.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:28.591Z,1509697648.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:28.943Z,1509697648.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:28.968Z,1509697648.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:29.347Z,1509697649.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:29.373Z,1509697649.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:29.746Z,1509697649.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:29.771Z,1509697649.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:30.142Z,1509697650.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:30.178Z,1509697650.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:30.543Z,1509697650.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:30.578Z,1509697650.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:30.999Z,1509697650.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:31.039Z,1509697651.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:31.344Z,1509697651.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:31.375Z,1509697651.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:31.743Z,1509697651.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:31.758Z,1509697651.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:32.143Z,1509697652.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:32.158Z,1509697652.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:32.544Z,1509697652.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:32.559Z,1509697652.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:32.942Z,1509697652.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:32.957Z,1509697652.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:33.350Z,1509697653.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:33.375Z,1509697653.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:33.743Z,1509697653.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:33.781Z,1509697653.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:34.146Z,1509697654.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:34.169Z,1509697654.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:34.544Z,1509697654.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:34.558Z,1509697654.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:34.950Z,1509697654.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:34.979Z,1509697654.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:35.371Z,1509697655.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:35.386Z,1509697655.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:35.751Z,1509697655.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:35.766Z,1509697655.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:36.147Z,1509697656.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:36.167Z,1509697656.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:36.548Z,1509697656.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:36.563Z,1509697656.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:36.947Z,1509697656.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:36.961Z,1509697656.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:37.347Z,1509697657.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:37.367Z,1509697657.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:37.750Z,1509697657.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:37.765Z,1509697657.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:38.150Z,1509697658.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:38.165Z,1509697658.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:38.547Z,1509697658.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:38.567Z,1509697658.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:38.954Z,1509697658.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:38.989Z,1509697658.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:39.346Z,1509697659.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:39.361Z,1509697659.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:39.747Z,1509697659.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:39.755Z,1509697659.755 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:27:39.755Z,1509697659.755 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:27:39.755Z,1509697659.755 [BPC1](ERROR): Data Fault
2017-11-03T08:27:39.764Z,1509697659.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:39.865Z,1509697659.865 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:27:40.150Z,1509697660.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:40.165Z,1509697660.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:40.546Z,1509697660.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:40.561Z,1509697660.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:40.954Z,1509697660.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:40.969Z,1509697660.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:41.069Z,1509697661.069 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:27:41.069Z,1509697661.069 [BPC1] No Fault, FailCount= 1
2017-11-03T08:27:41.350Z,1509697661.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:41.434Z,1509697661.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:41.746Z,1509697661.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:41.761Z,1509697661.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:42.148Z,1509697662.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:42.202Z,1509697662.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:42.547Z,1509697662.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:42.562Z,1509697662.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:42.948Z,1509697662.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:42.970Z,1509697662.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:43.348Z,1509697663.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:43.363Z,1509697663.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:43.747Z,1509697663.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:43.762Z,1509697663.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:44.147Z,1509697664.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:44.162Z,1509697664.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:44.547Z,1509697664.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:44.562Z,1509697664.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:44.998Z,1509697664.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:45.045Z,1509697665.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:45.352Z,1509697665.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:45.366Z,1509697665.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:45.751Z,1509697665.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:45.766Z,1509697665.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:46.151Z,1509697666.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:46.166Z,1509697666.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:46.552Z,1509697666.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:46.566Z,1509697666.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:46.951Z,1509697666.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:46.966Z,1509697666.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:47.355Z,1509697667.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:47.375Z,1509697667.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:47.753Z,1509697667.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:47.768Z,1509697667.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:48.151Z,1509697668.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:48.166Z,1509697668.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:48.551Z,1509697668.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:48.567Z,1509697668.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:48.951Z,1509697668.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:48.967Z,1509697668.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:49.349Z,1509697669.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:49.365Z,1509697669.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:49.752Z,1509697669.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:49.768Z,1509697669.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:50.151Z,1509697670.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:50.166Z,1509697670.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:50.551Z,1509697670.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:50.566Z,1509697670.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:50.944Z,1509697670.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:50.972Z,1509697670.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:51.354Z,1509697671.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:51.369Z,1509697671.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:51.754Z,1509697671.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:51.775Z,1509697671.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:52.152Z,1509697672.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:52.167Z,1509697672.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:52.554Z,1509697672.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:52.568Z,1509697672.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:52.949Z,1509697672.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:52.971Z,1509697672.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:53.351Z,1509697673.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:53.371Z,1509697673.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:53.753Z,1509697673.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:53.787Z,1509697673.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:54.143Z,1509697674.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:54.169Z,1509697674.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:54.544Z,1509697674.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:54.618Z,1509697674.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:54.942Z,1509697674.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:54.975Z,1509697674.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:55.343Z,1509697675.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:55.399Z,1509697675.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:55.744Z,1509697675.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:55.768Z,1509697675.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:56.146Z,1509697676.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:56.195Z,1509697676.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:56.543Z,1509697676.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:56.568Z,1509697676.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:56.942Z,1509697676.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:56.999Z,1509697676.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:57.346Z,1509697677.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:57.370Z,1509697677.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:57.743Z,1509697677.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:57.769Z,1509697677.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:58.144Z,1509697678.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:58.177Z,1509697678.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:58.546Z,1509697678.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:58.570Z,1509697678.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:58.985Z,1509697678.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:59.025Z,1509697679.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:59.343Z,1509697679.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:59.369Z,1509697679.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:27:59.746Z,1509697679.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:27:59.770Z,1509697679.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:00.143Z,1509697680.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:00.173Z,1509697680.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:00.543Z,1509697680.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:00.577Z,1509697680.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:00.943Z,1509697680.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:00.973Z,1509697680.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:01.342Z,1509697681.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:01.377Z,1509697681.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:01.743Z,1509697681.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:01.774Z,1509697681.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:02.139Z,1509697682.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:02.154Z,1509697682.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:02.543Z,1509697682.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:02.558Z,1509697682.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:02.943Z,1509697682.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:02.983Z,1509697682.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:03.358Z,1509697683.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:03.383Z,1509697683.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:03.743Z,1509697683.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:03.759Z,1509697683.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:04.146Z,1509697684.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:04.161Z,1509697684.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:04.543Z,1509697684.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:04.558Z,1509697684.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:04.942Z,1509697684.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:04.957Z,1509697684.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:05.344Z,1509697685.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:05.359Z,1509697685.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:05.742Z,1509697685.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:05.757Z,1509697685.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:06.140Z,1509697686.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:06.155Z,1509697686.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:06.544Z,1509697686.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:06.559Z,1509697686.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:06.942Z,1509697686.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:06.962Z,1509697686.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:07.344Z,1509697687.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:07.359Z,1509697687.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:07.744Z,1509697687.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:07.759Z,1509697687.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:08.144Z,1509697688.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:08.159Z,1509697688.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:08.543Z,1509697688.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:08.559Z,1509697688.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:08.947Z,1509697688.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:09.011Z,1509697689.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:09.350Z,1509697689.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:09.365Z,1509697689.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:09.743Z,1509697689.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:09.759Z,1509697689.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:10.143Z,1509697690.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:10.198Z,1509697690.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:10.546Z,1509697690.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:10.560Z,1509697690.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:10.948Z,1509697690.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:10.999Z,1509697690.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:11.343Z,1509697691.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:11.398Z,1509697691.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:11.746Z,1509697691.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:11.760Z,1509697691.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:12.143Z,1509697692.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:12.158Z,1509697692.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:12.550Z,1509697692.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:12.565Z,1509697692.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:12.993Z,1509697692.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:13.035Z,1509697693.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:13.346Z,1509697693.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:13.362Z,1509697693.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:13.747Z,1509697693.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:13.767Z,1509697693.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:14.147Z,1509697694.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:14.161Z,1509697694.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:14.546Z,1509697694.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:14.561Z,1509697694.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:14.952Z,1509697694.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:14.971Z,1509697694.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:15.352Z,1509697695.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:15.366Z,1509697695.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:15.747Z,1509697695.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:15.763Z,1509697695.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:16.147Z,1509697696.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:16.167Z,1509697696.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:16.548Z,1509697696.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:16.562Z,1509697696.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:16.947Z,1509697696.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:16.962Z,1509697696.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:17.356Z,1509697697.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:17.371Z,1509697697.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:17.751Z,1509697697.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:17.766Z,1509697697.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:18.146Z,1509697698.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:18.162Z,1509697698.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:18.549Z,1509697698.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:18.564Z,1509697698.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:18.951Z,1509697698.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:18.966Z,1509697698.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:19.348Z,1509697699.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:19.363Z,1509697699.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:19.748Z,1509697699.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:19.763Z,1509697699.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:20.147Z,1509697700.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:20.162Z,1509697700.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:20.548Z,1509697700.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:20.563Z,1509697700.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:20.952Z,1509697700.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:20.967Z,1509697700.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:21.347Z,1509697701.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:21.362Z,1509697701.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:21.748Z,1509697701.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:21.763Z,1509697701.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:22.147Z,1509697702.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:22.163Z,1509697702.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:22.547Z,1509697702.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:22.562Z,1509697702.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:22.950Z,1509697702.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:22.971Z,1509697702.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:23.354Z,1509697703.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:23.426Z,1509697703.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:26.610Z,1509697706.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:26.667Z,1509697706.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:26.783Z,1509697706.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:26.831Z,1509697706.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:27.182Z,1509697707.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:27.248Z,1509697707.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:27.594Z,1509697707.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:27.608Z,1509697707.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:27.983Z,1509697707.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:28.044Z,1509697708.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:28.394Z,1509697708.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:28.447Z,1509697708.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:28.549Z,1509697708.549 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T08:28:28.549Z,1509697708.549 [NAL9602] No Fault, FailCount= 5
2017-11-03T08:28:28.770Z,1509697708.770 [NAL9602](INFO): Powering up NAL9602
2017-11-03T08:28:28.801Z,1509697708.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:28.819Z,1509697708.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:29.180Z,1509697709.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:29.254Z,1509697709.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:29.585Z,1509697709.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:29.600Z,1509697709.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:29.987Z,1509697709.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:30.006Z,1509697710.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:30.383Z,1509697710.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:30.399Z,1509697710.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:30.787Z,1509697710.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:30.807Z,1509697710.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:31.182Z,1509697711.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:31.198Z,1509697711.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:31.585Z,1509697711.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:31.601Z,1509697711.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:31.991Z,1509697711.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:32.011Z,1509697712.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:32.390Z,1509697712.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:32.406Z,1509697712.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:32.791Z,1509697712.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:32.807Z,1509697712.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:33.191Z,1509697713.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:33.207Z,1509697713.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:33.591Z,1509697713.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:33.611Z,1509697713.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:33.992Z,1509697713.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:34.007Z,1509697714.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:34.390Z,1509697714.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:34.405Z,1509697714.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:34.795Z,1509697714.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:34.812Z,1509697714.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:35.187Z,1509697715.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:35.206Z,1509697715.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:35.590Z,1509697715.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:35.605Z,1509697715.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:35.992Z,1509697715.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:36.007Z,1509697716.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:36.391Z,1509697716.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:36.406Z,1509697716.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:36.803Z,1509697716.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:36.838Z,1509697716.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:37.192Z,1509697717.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:37.234Z,1509697717.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:37.587Z,1509697717.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:37.603Z,1509697717.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:37.990Z,1509697717.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:38.026Z,1509697718.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:38.393Z,1509697718.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:38.413Z,1509697718.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:38.813Z,1509697718.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:38.865Z,1509697718.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:39.201Z,1509697719.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:39.216Z,1509697719.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:39.567Z,1509697719.567 [NAL9602](INFO): NAL9602 initialized
2017-11-03T08:28:39.593Z,1509697719.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:39.620Z,1509697719.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:39.994Z,1509697719.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:40.014Z,1509697720.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:40.404Z,1509697720.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:40.466Z,1509697720.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:40.804Z,1509697720.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:40.874Z,1509697720.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:41.201Z,1509697721.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:41.221Z,1509697721.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:41.585Z,1509697721.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:41.615Z,1509697721.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:41.986Z,1509697721.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:42.040Z,1509697722.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:42.405Z,1509697722.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:42.422Z,1509697722.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:42.805Z,1509697722.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:42.866Z,1509697722.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:43.248Z,1509697723.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:43.320Z,1509697723.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:43.586Z,1509697723.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:43.633Z,1509697723.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:43.984Z,1509697723.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:44.010Z,1509697724.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:44.384Z,1509697724.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:44.419Z,1509697724.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:44.787Z,1509697724.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:44.819Z,1509697724.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:45.183Z,1509697725.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:45.282Z,1509697725.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:45.609Z,1509697725.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:45.629Z,1509697725.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:46.012Z,1509697726.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:46.030Z,1509697726.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:46.408Z,1509697726.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:46.423Z,1509697726.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:46.803Z,1509697726.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:46.839Z,1509697726.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:47.187Z,1509697727.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:47.227Z,1509697727.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:47.587Z,1509697727.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:47.618Z,1509697727.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:47.984Z,1509697727.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:48.015Z,1509697728.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:48.405Z,1509697728.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:48.421Z,1509697728.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:48.805Z,1509697728.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:48.823Z,1509697728.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:49.205Z,1509697729.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:49.225Z,1509697729.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:49.580Z,1509697729.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:49.615Z,1509697729.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:49.980Z,1509697729.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:50.007Z,1509697730.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:50.384Z,1509697730.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:50.407Z,1509697730.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:50.795Z,1509697730.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:50.827Z,1509697730.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:51.185Z,1509697731.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:51.217Z,1509697731.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:51.597Z,1509697731.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:51.623Z,1509697731.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:52.001Z,1509697732.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:52.033Z,1509697732.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:52.398Z,1509697732.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:52.427Z,1509697732.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:52.831Z,1509697732.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:52.851Z,1509697732.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:53.185Z,1509697733.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:53.233Z,1509697733.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:53.586Z,1509697733.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:53.601Z,1509697733.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:53.987Z,1509697733.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:54.003Z,1509697734.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:54.398Z,1509697734.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:54.427Z,1509697734.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:54.803Z,1509697734.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:54.847Z,1509697734.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:55.207Z,1509697735.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:55.295Z,1509697735.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:55.591Z,1509697735.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:55.607Z,1509697735.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:55.991Z,1509697735.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:56.012Z,1509697736.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:56.391Z,1509697736.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:56.443Z,1509697736.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:56.792Z,1509697736.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:56.807Z,1509697736.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:57.187Z,1509697737.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:57.296Z,1509697737.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:57.601Z,1509697737.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:57.651Z,1509697737.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:58.001Z,1509697738.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:58.046Z,1509697738.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:58.399Z,1509697738.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:58.446Z,1509697738.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:58.793Z,1509697738.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:58.809Z,1509697738.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:59.194Z,1509697739.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:59.271Z,1509697739.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:59.592Z,1509697739.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:28:59.642Z,1509697739.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:28:59.991Z,1509697739.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:00.006Z,1509697740.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:00.402Z,1509697740.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:00.441Z,1509697740.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:00.807Z,1509697740.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:00.823Z,1509697740.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:01.200Z,1509697741.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:01.245Z,1509697741.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:01.594Z,1509697741.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:01.610Z,1509697741.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:01.995Z,1509697741.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:02.019Z,1509697742.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:02.391Z,1509697742.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:02.411Z,1509697742.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:02.797Z,1509697742.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:02.819Z,1509697742.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:03.194Z,1509697743.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:03.215Z,1509697743.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:03.599Z,1509697743.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:03.619Z,1509697743.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:04.003Z,1509697744.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:04.021Z,1509697744.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:04.400Z,1509697744.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:04.441Z,1509697744.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:04.795Z,1509697744.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:04.815Z,1509697744.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:05.196Z,1509697745.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:05.221Z,1509697745.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:05.591Z,1509697745.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:05.611Z,1509697745.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:05.993Z,1509697745.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:06.008Z,1509697746.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:06.401Z,1509697746.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:06.416Z,1509697746.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:06.834Z,1509697746.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:06.856Z,1509697746.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:07.199Z,1509697747.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:07.241Z,1509697747.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:07.593Z,1509697747.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:07.642Z,1509697747.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:07.994Z,1509697747.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:08.015Z,1509697748.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:08.390Z,1509697748.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:08.407Z,1509697748.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:08.796Z,1509697748.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:08.817Z,1509697748.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:09.191Z,1509697749.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:09.207Z,1509697749.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:09.600Z,1509697749.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:09.665Z,1509697749.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:10.001Z,1509697750.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:10.064Z,1509697750.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:10.402Z,1509697750.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:10.420Z,1509697750.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:10.794Z,1509697750.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:10.842Z,1509697750.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:11.200Z,1509697751.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:11.290Z,1509697751.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:11.597Z,1509697751.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:11.643Z,1509697751.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:11.991Z,1509697751.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:12.046Z,1509697752.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:12.400Z,1509697752.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:12.454Z,1509697752.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:12.799Z,1509697752.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:12.820Z,1509697752.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:12.872Z,1509697752.872 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:29:12.872Z,1509697752.872 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T08:29:12.872Z,1509697752.872 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:29:12.928Z,1509697752.928 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:29:13.208Z,1509697753.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:13.263Z,1509697753.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:29:13.264Z,1509697753.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:13.276Z,1509697753.276 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:29:13.440Z,1509697753.440 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:29:13.588Z,1509697753.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:13.628Z,1509697753.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:29:13.629Z,1509697753.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:13.987Z,1509697753.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:14.023Z,1509697754.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:29:14.023Z,1509697754.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:14.384Z,1509697754.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:14.407Z,1509697754.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:29:14.408Z,1509697754.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:14.788Z,1509697754.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:14.803Z,1509697754.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:29:14.804Z,1509697754.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:14.901Z,1509697754.901 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:29:14.901Z,1509697754.901 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T08:29:15.056Z,1509697755.056 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:29:15.057Z,1509697755.057 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:29:15.057Z,1509697755.057 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:29:15.057Z,1509697755.057 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:29:15.183Z,1509697755.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:15.199Z,1509697755.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:29:15.200Z,1509697755.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:15.601Z,1509697755.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:15.633Z,1509697755.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:29:15.635Z,1509697755.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:16.001Z,1509697756.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:16.032Z,1509697756.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:29:16.033Z,1509697756.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:16.393Z,1509697756.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:16.409Z,1509697756.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:29:16.410Z,1509697756.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:16.789Z,1509697756.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:16.835Z,1509697756.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:29:16.836Z,1509697756.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:17.187Z,1509697757.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:17.202Z,1509697757.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:29:17.203Z,1509697757.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:17.588Z,1509697757.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:17.603Z,1509697757.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:29:17.604Z,1509697757.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:17.991Z,1509697757.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:18.006Z,1509697758.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:29:18.007Z,1509697758.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:18.402Z,1509697758.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:18.436Z,1509697758.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:29:18.437Z,1509697758.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:18.793Z,1509697758.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:18.837Z,1509697758.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:29:18.838Z,1509697758.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:19.213Z,1509697759.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:19.237Z,1509697759.237 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:29:19.287Z,1509697759.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T08:29:19.288Z,1509697759.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:19.360Z,1509697759.360 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:29:19.361Z,1509697759.361 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:29:19.362Z,1509697759.362 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:29:19.362Z,1509697759.362 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:29:19.598Z,1509697759.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:19.650Z,1509697759.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:29:19.651Z,1509697759.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:19.991Z,1509697759.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:20.023Z,1509697760.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:20.391Z,1509697760.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:20.411Z,1509697760.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:20.796Z,1509697760.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:20.812Z,1509697760.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:21.195Z,1509697761.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:21.214Z,1509697761.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:21.607Z,1509697761.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:21.623Z,1509697761.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:22.005Z,1509697762.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:22.047Z,1509697762.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:22.401Z,1509697762.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:22.427Z,1509697762.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:22.796Z,1509697762.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:22.823Z,1509697762.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:23.196Z,1509697763.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:23.216Z,1509697763.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:23.598Z,1509697763.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:23.606Z,1509697763.606 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:29:23.607Z,1509697763.607 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:29:23.607Z,1509697763.607 [BPC1](ERROR): Data Fault
2017-11-03T08:29:23.615Z,1509697763.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:23.689Z,1509697763.689 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:29:26.862Z,1509697766.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:26.878Z,1509697766.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:27.014Z,1509697767.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:27.057Z,1509697767.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:27.409Z,1509697767.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:27.424Z,1509697767.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:27.501Z,1509697767.501 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:29:27.501Z,1509697767.501 [BPC1] No Fault, FailCount= 1
2017-11-03T08:29:27.815Z,1509697767.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:27.902Z,1509697767.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:28.185Z,1509697768.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:28.243Z,1509697768.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:28.587Z,1509697768.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:28.612Z,1509697768.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:28.987Z,1509697768.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:29.013Z,1509697769.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:29.409Z,1509697769.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:29.425Z,1509697769.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:29.809Z,1509697769.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:29.825Z,1509697769.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:30.210Z,1509697770.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:30.225Z,1509697770.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:30.584Z,1509697770.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:30.616Z,1509697770.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:30.986Z,1509697770.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:31.018Z,1509697771.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:31.388Z,1509697771.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:31.423Z,1509697771.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:31.785Z,1509697771.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:31.821Z,1509697771.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:32.184Z,1509697772.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:32.198Z,1509697772.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:32.610Z,1509697772.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:32.625Z,1509697772.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:33.028Z,1509697773.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:33.047Z,1509697773.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:33.410Z,1509697773.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:33.430Z,1509697773.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:33.785Z,1509697773.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:33.840Z,1509697773.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:34.184Z,1509697774.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:34.200Z,1509697774.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:34.589Z,1509697774.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:34.604Z,1509697774.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:34.987Z,1509697774.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:35.034Z,1509697775.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:35.399Z,1509697775.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:35.425Z,1509697775.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:35.802Z,1509697775.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:35.819Z,1509697775.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:36.206Z,1509697776.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:36.263Z,1509697776.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:36.598Z,1509697776.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:36.619Z,1509697776.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:36.997Z,1509697776.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:37.012Z,1509697777.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:37.403Z,1509697777.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:37.419Z,1509697777.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:37.797Z,1509697777.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:37.812Z,1509697777.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:38.195Z,1509697778.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:38.211Z,1509697778.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:38.604Z,1509697778.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:38.619Z,1509697778.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:39.008Z,1509697779.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:39.023Z,1509697779.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:39.407Z,1509697779.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:39.431Z,1509697779.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:39.796Z,1509697779.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:39.811Z,1509697779.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:40.198Z,1509697780.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:40.219Z,1509697780.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:40.597Z,1509697780.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:40.734Z,1509697780.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:40.999Z,1509697780.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:41.031Z,1509697781.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:41.409Z,1509697781.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:41.468Z,1509697781.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:41.797Z,1509697781.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:41.822Z,1509697781.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:42.210Z,1509697782.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:42.266Z,1509697782.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:42.583Z,1509697782.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:42.635Z,1509697782.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:43.012Z,1509697783.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:43.034Z,1509697783.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:43.388Z,1509697783.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:43.403Z,1509697783.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:43.790Z,1509697783.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:43.821Z,1509697783.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:44.191Z,1509697784.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:44.214Z,1509697784.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:44.602Z,1509697784.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:44.627Z,1509697784.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:45.019Z,1509697785.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:45.034Z,1509697785.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:45.411Z,1509697785.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:45.427Z,1509697785.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:45.788Z,1509697785.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:45.823Z,1509697785.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:46.191Z,1509697786.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:46.207Z,1509697786.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:46.589Z,1509697786.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:46.603Z,1509697786.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:47.001Z,1509697787.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:47.042Z,1509697787.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:47.401Z,1509697787.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:47.428Z,1509697787.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:47.801Z,1509697787.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:47.831Z,1509697787.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:48.201Z,1509697788.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:48.229Z,1509697788.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:48.588Z,1509697788.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:48.603Z,1509697788.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:48.988Z,1509697788.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:49.003Z,1509697789.003 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:49.003Z,1509697789.003 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 165
2017-11-03T08:29:49.003Z,1509697789.003 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:29:49.005Z,1509697789.005 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:49.005Z,1509697789.005 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 165
2017-11-03T08:29:49.005Z,1509697789.005 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:29:49.007Z,1509697789.007 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:49.007Z,1509697789.007 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 165
2017-11-03T08:29:49.007Z,1509697789.007 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:29:49.101Z,1509697789.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:29:49.101Z,1509697789.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:29:49.101Z,1509697789.101 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:29:49.395Z,1509697789.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:49.504Z,1509697789.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:29:49.505Z,1509697789.505 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 165
2017-11-03T08:29:49.505Z,1509697789.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:29:49.505Z,1509697789.505 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 165
2017-11-03T08:29:49.506Z,1509697789.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:29:49.506Z,1509697789.506 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 165
2017-11-03T08:29:49.797Z,1509697789.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:49.811Z,1509697789.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:29:49.811Z,1509697789.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:29:49.812Z,1509697789.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:29:49.812Z,1509697789.812 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:29:49.813Z,1509697789.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:29:49.813Z,1509697789.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:29:49.813Z,1509697789.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:29:49.814Z,1509697789.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:29:49.814Z,1509697789.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:29:50.195Z,1509697790.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:50.215Z,1509697790.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:50.608Z,1509697790.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:50.640Z,1509697790.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:51.002Z,1509697791.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:51.018Z,1509697791.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:51.414Z,1509697791.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:51.443Z,1509697791.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:51.795Z,1509697791.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:51.810Z,1509697791.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:52.195Z,1509697792.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:52.211Z,1509697792.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:52.595Z,1509697792.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:52.611Z,1509697792.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:52.995Z,1509697792.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:53.010Z,1509697793.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:53.402Z,1509697793.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:53.418Z,1509697793.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:53.798Z,1509697793.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:53.813Z,1509697793.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:54.209Z,1509697794.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:54.270Z,1509697794.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:54.595Z,1509697794.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:54.658Z,1509697794.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:54.996Z,1509697794.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:55.012Z,1509697795.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:55.384Z,1509697795.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:55.435Z,1509697795.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:55.787Z,1509697795.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:55.823Z,1509697795.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:56.188Z,1509697796.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:56.252Z,1509697796.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:56.605Z,1509697796.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:56.643Z,1509697796.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:57.001Z,1509697797.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:57.026Z,1509697797.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:57.401Z,1509697797.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:57.426Z,1509697797.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:57.788Z,1509697797.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:57.839Z,1509697797.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:58.195Z,1509697798.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:58.227Z,1509697798.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:58.588Z,1509697798.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:58.603Z,1509697798.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:58.991Z,1509697798.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:59.028Z,1509697799.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:59.401Z,1509697799.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:59.426Z,1509697799.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:29:59.801Z,1509697799.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:29:59.830Z,1509697799.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:00.201Z,1509697800.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:00.227Z,1509697800.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:00.595Z,1509697800.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:00.627Z,1509697800.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:01.005Z,1509697801.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:01.043Z,1509697801.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:01.388Z,1509697801.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:01.402Z,1509697801.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:01.796Z,1509697801.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:01.827Z,1509697801.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:02.188Z,1509697802.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:02.202Z,1509697802.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:02.605Z,1509697802.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:02.630Z,1509697802.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:03.001Z,1509697803.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:03.035Z,1509697803.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:03.405Z,1509697803.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:03.427Z,1509697803.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:03.789Z,1509697803.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:03.836Z,1509697803.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:04.192Z,1509697804.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:04.207Z,1509697804.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:04.595Z,1509697804.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:04.610Z,1509697804.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:04.988Z,1509697804.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:05.003Z,1509697805.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:05.411Z,1509697805.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:05.439Z,1509697805.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:05.805Z,1509697805.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:05.836Z,1509697805.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:06.205Z,1509697806.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:06.236Z,1509697806.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:06.592Z,1509697806.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:06.607Z,1509697806.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:06.999Z,1509697806.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:07.035Z,1509697807.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:07.395Z,1509697807.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:07.410Z,1509697807.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:07.792Z,1509697807.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:07.808Z,1509697807.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:08.192Z,1509697808.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:08.251Z,1509697808.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:08.609Z,1509697808.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:08.640Z,1509697808.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:09.003Z,1509697809.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:09.058Z,1509697809.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:09.403Z,1509697809.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:09.419Z,1509697809.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:09.792Z,1509697809.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:09.807Z,1509697809.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:10.195Z,1509697810.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:10.250Z,1509697810.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:10.596Z,1509697810.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:10.611Z,1509697810.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:10.994Z,1509697810.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:11.049Z,1509697811.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:11.403Z,1509697811.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:11.456Z,1509697811.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:11.805Z,1509697811.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:11.820Z,1509697811.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:12.204Z,1509697812.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:12.222Z,1509697812.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:12.595Z,1509697812.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:12.610Z,1509697812.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:13.003Z,1509697813.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:13.018Z,1509697813.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:13.398Z,1509697813.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:13.413Z,1509697813.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:13.799Z,1509697813.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:13.814Z,1509697813.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:14.198Z,1509697814.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:14.219Z,1509697814.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:14.604Z,1509697814.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:14.626Z,1509697814.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:15.030Z,1509697815.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:15.050Z,1509697815.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:15.406Z,1509697815.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:15.426Z,1509697815.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:15.799Z,1509697815.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:15.814Z,1509697815.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:16.199Z,1509697816.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:16.219Z,1509697816.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:16.625Z,1509697816.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:16.640Z,1509697816.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:16.988Z,1509697816.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:17.004Z,1509697817.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:17.405Z,1509697817.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:17.435Z,1509697817.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:17.805Z,1509697817.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:17.831Z,1509697817.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:18.201Z,1509697818.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:18.227Z,1509697818.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:18.594Z,1509697818.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:18.621Z,1509697818.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:18.987Z,1509697818.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:19.007Z,1509697819.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:19.407Z,1509697819.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:19.439Z,1509697819.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:19.794Z,1509697819.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:19.818Z,1509697819.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:20.193Z,1509697820.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:20.208Z,1509697820.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:20.601Z,1509697820.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:20.635Z,1509697820.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:21.017Z,1509697821.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:21.042Z,1509697821.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:21.402Z,1509697821.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:21.417Z,1509697821.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:21.797Z,1509697821.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:21.811Z,1509697821.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:22.197Z,1509697822.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:22.212Z,1509697822.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:22.597Z,1509697822.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:22.619Z,1509697822.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:23.009Z,1509697823.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:23.024Z,1509697823.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:23.027Z,1509697823.027 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T08:30:23.027Z,1509697823.027 [Default:CheckIn:C.Wait] Stopped
2017-11-03T08:30:23.027Z,1509697823.027 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T08:30:23.027Z,1509697823.027 [Default:CheckIn:D] Running Loop=1
2017-11-03T08:30:23.409Z,1509697823.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:23.498Z,1509697823.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:23.502Z,1509697823.502 [Default:CheckIn:D] Stopped
2017-11-03T08:30:23.502Z,1509697823.502 [Default:CheckIn:E] Running Loop=1
2017-11-03T08:30:23.813Z,1509697823.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:23.828Z,1509697823.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:23.831Z,1509697823.831 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 495.265592 min 
2017-11-03T08:30:23.831Z,1509697823.831 [Default:CheckIn:E] Stopped
2017-11-03T08:30:23.832Z,1509697823.832 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T08:30:23.832Z,1509697823.832 [Default:CheckIn] Stopped
2017-11-03T08:30:23.832Z,1509697823.832 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T08:30:23.832Z,1509697823.832 [Default:CheckIn](INFO): Running loop #49
2017-11-03T08:30:23.832Z,1509697823.832 [Default:CheckIn] Running Loop=49
2017-11-03T08:30:23.833Z,1509697823.833 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T08:30:23.833Z,1509697823.833 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T08:30:27.081Z,1509697827.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:27.139Z,1509697827.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:27.288Z,1509697827.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:27.323Z,1509697827.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:27.682Z,1509697827.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:27.730Z,1509697827.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:28.087Z,1509697828.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:28.136Z,1509697828.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:28.493Z,1509697828.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:28.525Z,1509697828.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:28.901Z,1509697828.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:28.979Z,1509697828.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:29.297Z,1509697829.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:29.323Z,1509697829.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:29.683Z,1509697829.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:29.703Z,1509697829.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:30.080Z,1509697830.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:30.095Z,1509697830.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:30.479Z,1509697830.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:30.494Z,1509697830.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:30.880Z,1509697830.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:30.895Z,1509697830.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:31.300Z,1509697831.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:31.328Z,1509697831.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:31.694Z,1509697831.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:31.726Z,1509697831.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:32.093Z,1509697832.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:32.126Z,1509697832.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:32.497Z,1509697832.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:32.523Z,1509697832.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:32.880Z,1509697832.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:32.894Z,1509697832.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:33.302Z,1509697833.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:33.335Z,1509697833.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:33.681Z,1509697833.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:33.697Z,1509697833.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:34.079Z,1509697834.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:34.094Z,1509697834.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:34.494Z,1509697834.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:34.526Z,1509697834.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:34.897Z,1509697834.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:34.922Z,1509697834.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:35.294Z,1509697835.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:35.326Z,1509697835.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:35.680Z,1509697835.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:35.696Z,1509697835.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:36.080Z,1509697836.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:36.096Z,1509697836.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:36.482Z,1509697836.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:36.499Z,1509697836.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:36.896Z,1509697836.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:36.926Z,1509697836.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:37.279Z,1509697837.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:37.294Z,1509697837.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:37.693Z,1509697837.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:37.726Z,1509697837.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:38.094Z,1509697838.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:38.126Z,1509697838.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:38.493Z,1509697838.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:38.526Z,1509697838.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:38.895Z,1509697838.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:38.926Z,1509697838.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:39.280Z,1509697839.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:39.295Z,1509697839.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:39.680Z,1509697839.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:39.758Z,1509697839.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:40.087Z,1509697840.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:40.102Z,1509697840.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:40.502Z,1509697840.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:40.531Z,1509697840.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:40.909Z,1509697840.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:40.979Z,1509697840.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:41.301Z,1509697841.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:41.332Z,1509697841.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:41.687Z,1509697841.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:41.739Z,1509697841.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:42.087Z,1509697842.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:42.138Z,1509697842.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:42.487Z,1509697842.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:42.502Z,1509697842.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:42.888Z,1509697842.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:42.938Z,1509697842.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:43.288Z,1509697843.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:43.307Z,1509697843.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:43.692Z,1509697843.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:43.707Z,1509697843.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:44.097Z,1509697844.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:44.112Z,1509697844.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:44.494Z,1509697844.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:44.509Z,1509697844.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:44.890Z,1509697844.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:44.904Z,1509697844.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:45.302Z,1509697845.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:45.345Z,1509697845.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:45.689Z,1509697845.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:45.704Z,1509697845.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:46.084Z,1509697846.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:46.106Z,1509697846.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:46.494Z,1509697846.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:46.510Z,1509697846.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:46.893Z,1509697846.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:46.909Z,1509697846.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:47.304Z,1509697847.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:47.343Z,1509697847.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:47.688Z,1509697847.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:47.704Z,1509697847.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:48.088Z,1509697848.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:48.103Z,1509697848.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:48.492Z,1509697848.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:48.507Z,1509697848.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:48.890Z,1509697848.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:48.911Z,1509697848.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:49.289Z,1509697849.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:49.304Z,1509697849.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:49.693Z,1509697849.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:49.708Z,1509697849.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:50.098Z,1509697850.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:50.113Z,1509697850.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:50.494Z,1509697850.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:50.515Z,1509697850.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:50.888Z,1509697850.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:50.903Z,1509697850.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:51.288Z,1509697851.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:51.304Z,1509697851.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:51.688Z,1509697851.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:51.704Z,1509697851.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:52.091Z,1509697852.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:52.110Z,1509697852.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:52.494Z,1509697852.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:52.509Z,1509697852.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:52.897Z,1509697852.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:52.913Z,1509697852.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:53.293Z,1509697853.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:53.315Z,1509697853.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:53.691Z,1509697853.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:53.750Z,1509697853.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:54.089Z,1509697854.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:54.146Z,1509697854.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:54.491Z,1509697854.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:54.506Z,1509697854.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:54.894Z,1509697854.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:54.954Z,1509697854.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:55.290Z,1509697855.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:55.305Z,1509697855.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:55.701Z,1509697855.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:55.745Z,1509697855.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:56.101Z,1509697856.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:56.151Z,1509697856.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:56.499Z,1509697856.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:56.555Z,1509697856.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:56.890Z,1509697856.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:56.994Z,1509697856.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:57.278Z,1509697857.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:57.293Z,1509697857.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:57.681Z,1509697857.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:57.696Z,1509697857.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:58.092Z,1509697858.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:58.146Z,1509697858.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:58.494Z,1509697858.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:58.520Z,1509697858.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:58.895Z,1509697858.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:58.919Z,1509697858.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:59.305Z,1509697859.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:59.371Z,1509697859.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:30:59.689Z,1509697859.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:30:59.721Z,1509697859.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:00.080Z,1509697860.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:00.109Z,1509697860.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:00.478Z,1509697860.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:00.529Z,1509697860.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:00.879Z,1509697860.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:00.905Z,1509697860.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:01.300Z,1509697861.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:01.375Z,1509697861.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:01.691Z,1509697861.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:01.760Z,1509697861.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:02.103Z,1509697862.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:02.127Z,1509697862.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:02.517Z,1509697862.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:02.569Z,1509697862.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:02.880Z,1509697862.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:02.938Z,1509697862.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:03.281Z,1509697863.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:03.322Z,1509697863.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:03.710Z,1509697863.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:03.738Z,1509697863.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:04.080Z,1509697864.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:04.130Z,1509697864.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:04.492Z,1509697864.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:04.562Z,1509697864.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:04.938Z,1509697864.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:04.988Z,1509697864.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:05.291Z,1509697865.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:05.361Z,1509697865.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:05.714Z,1509697865.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:05.746Z,1509697865.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:06.107Z,1509697866.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:06.135Z,1509697866.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:06.485Z,1509697866.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:06.546Z,1509697866.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:06.886Z,1509697866.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:06.949Z,1509697866.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:07.287Z,1509697867.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:07.295Z,1509697867.295 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:31:07.295Z,1509697867.295 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:31:07.295Z,1509697867.295 [BPC1](ERROR): Data Fault
2017-11-03T08:31:07.343Z,1509697867.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:07.441Z,1509697867.441 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:31:07.696Z,1509697867.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:07.732Z,1509697867.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:08.112Z,1509697868.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:08.152Z,1509697868.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:08.502Z,1509697868.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:08.523Z,1509697868.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:08.637Z,1509697868.637 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:31:08.637Z,1509697868.637 [BPC1] No Fault, FailCount= 1
2017-11-03T08:31:08.890Z,1509697868.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:09.014Z,1509697869.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:09.292Z,1509697869.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:09.316Z,1509697869.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:09.685Z,1509697869.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:09.755Z,1509697869.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:10.080Z,1509697870.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:10.152Z,1509697870.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:10.491Z,1509697870.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:10.534Z,1509697870.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:10.903Z,1509697870.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:10.990Z,1509697870.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:11.307Z,1509697871.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:11.362Z,1509697871.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:11.702Z,1509697871.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:11.729Z,1509697871.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:12.108Z,1509697872.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:12.139Z,1509697872.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:12.506Z,1509697872.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:12.566Z,1509697872.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:12.907Z,1509697872.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:12.935Z,1509697872.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:13.300Z,1509697873.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:13.376Z,1509697873.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:13.699Z,1509697873.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:13.774Z,1509697873.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:14.095Z,1509697874.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:14.135Z,1509697874.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:14.497Z,1509697874.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:14.520Z,1509697874.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:14.879Z,1509697874.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:14.894Z,1509697874.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:15.285Z,1509697875.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:15.324Z,1509697875.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:15.336Z,1509697875.336 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:31:15.336Z,1509697875.336 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T08:31:15.336Z,1509697875.336 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:31:15.437Z,1509697875.437 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:31:15.684Z,1509697875.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:15.699Z,1509697875.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:31:15.700Z,1509697875.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:15.741Z,1509697875.741 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:31:15.876Z,1509697875.876 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:31:16.088Z,1509697876.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:16.111Z,1509697876.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:31:16.112Z,1509697876.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:16.494Z,1509697876.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:16.509Z,1509697876.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:31:16.510Z,1509697876.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:16.898Z,1509697876.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:16.913Z,1509697876.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:31:16.914Z,1509697876.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:17.293Z,1509697877.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:17.308Z,1509697877.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:31:17.309Z,1509697877.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:17.413Z,1509697877.413 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:31:17.413Z,1509697877.413 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T08:31:17.493Z,1509697877.493 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:31:17.493Z,1509697877.493 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:31:17.493Z,1509697877.493 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:31:17.493Z,1509697877.493 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:31:17.690Z,1509697877.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:17.705Z,1509697877.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:31:17.706Z,1509697877.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:18.087Z,1509697878.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:18.102Z,1509697878.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:31:18.103Z,1509697878.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:18.490Z,1509697878.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:18.510Z,1509697878.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:31:18.511Z,1509697878.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:18.890Z,1509697878.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:18.910Z,1509697878.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:31:18.911Z,1509697878.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:19.287Z,1509697879.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:19.302Z,1509697879.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:31:19.303Z,1509697879.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:19.693Z,1509697879.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:19.714Z,1509697879.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:31:19.715Z,1509697879.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:20.098Z,1509697880.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:20.113Z,1509697880.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:31:20.113Z,1509697880.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:20.494Z,1509697880.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:20.508Z,1509697880.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:31:20.509Z,1509697880.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:20.888Z,1509697880.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:20.902Z,1509697880.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:31:20.903Z,1509697880.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:21.290Z,1509697881.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:21.310Z,1509697881.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:31:21.311Z,1509697881.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:21.622Z,1509697881.622 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:31:21.706Z,1509697881.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:21.743Z,1509697881.743 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:31:21.744Z,1509697881.744 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:31:21.745Z,1509697881.745 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:31:21.745Z,1509697881.745 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:31:21.808Z,1509697881.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T08:31:21.825Z,1509697881.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:22.096Z,1509697882.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:22.161Z,1509697882.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:22.502Z,1509697882.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:22.518Z,1509697882.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:22.901Z,1509697882.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:22.951Z,1509697882.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:23.301Z,1509697883.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:23.317Z,1509697883.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:23.692Z,1509697883.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:23.749Z,1509697883.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:24.092Z,1509697884.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:24.150Z,1509697884.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:27.297Z,1509697887.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:27.312Z,1509697887.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:27.427Z,1509697887.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:27.475Z,1509697887.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:27.849Z,1509697887.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:27.864Z,1509697887.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:28.254Z,1509697888.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:28.270Z,1509697888.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:28.671Z,1509697888.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:28.759Z,1509697888.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:29.026Z,1509697889.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:29.052Z,1509697889.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:29.428Z,1509697889.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:29.454Z,1509697889.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:29.825Z,1509697889.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:29.851Z,1509697889.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:30.228Z,1509697890.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:30.262Z,1509697890.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:30.646Z,1509697890.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:30.681Z,1509697890.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:31.049Z,1509697891.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:31.064Z,1509697891.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:31.449Z,1509697891.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:31.464Z,1509697891.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:31.831Z,1509697891.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:31.857Z,1509697891.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:32.231Z,1509697892.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:32.263Z,1509697892.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:32.629Z,1509697892.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:32.656Z,1509697892.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:33.028Z,1509697893.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:33.059Z,1509697893.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:33.449Z,1509697893.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:33.464Z,1509697893.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:33.849Z,1509697893.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:33.864Z,1509697893.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:34.250Z,1509697894.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:34.265Z,1509697894.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:34.631Z,1509697894.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:34.655Z,1509697894.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:35.058Z,1509697895.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:35.082Z,1509697895.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:35.438Z,1509697895.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:35.470Z,1509697895.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:35.857Z,1509697895.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:35.918Z,1509697895.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:36.228Z,1509697896.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:36.243Z,1509697896.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:36.641Z,1509697896.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:36.687Z,1509697896.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:37.041Z,1509697897.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:37.072Z,1509697897.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:37.441Z,1509697897.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:37.473Z,1509697897.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:37.839Z,1509697897.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:37.895Z,1509697897.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:38.234Z,1509697898.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:38.255Z,1509697898.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:38.632Z,1509697898.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:38.683Z,1509697898.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:39.032Z,1509697899.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:39.086Z,1509697899.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:39.445Z,1509697899.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:39.477Z,1509697899.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:39.853Z,1509697899.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:39.895Z,1509697899.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:40.249Z,1509697900.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:40.274Z,1509697900.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:40.628Z,1509697900.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:40.644Z,1509697900.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:41.032Z,1509697901.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:41.047Z,1509697901.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:41.432Z,1509697901.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:41.446Z,1509697901.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:41.833Z,1509697901.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:41.848Z,1509697901.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:42.239Z,1509697902.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:42.278Z,1509697902.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:42.642Z,1509697902.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:42.673Z,1509697902.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:43.046Z,1509697903.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:43.075Z,1509697903.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:43.445Z,1509697903.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:43.476Z,1509697903.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:43.834Z,1509697903.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:43.849Z,1509697903.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:44.282Z,1509697904.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:44.325Z,1509697904.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:44.636Z,1509697904.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:44.651Z,1509697904.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:45.035Z,1509697905.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:45.054Z,1509697905.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:45.454Z,1509697905.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:45.479Z,1509697905.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:45.842Z,1509697905.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:45.856Z,1509697905.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:46.290Z,1509697906.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:46.311Z,1509697906.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:46.638Z,1509697906.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:46.654Z,1509697906.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:47.037Z,1509697907.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:47.052Z,1509697907.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:47.439Z,1509697907.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:47.454Z,1509697907.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:47.835Z,1509697907.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:47.850Z,1509697907.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:48.238Z,1509697908.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:48.253Z,1509697908.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:48.642Z,1509697908.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:48.657Z,1509697908.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:49.045Z,1509697909.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:49.061Z,1509697909.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:49.441Z,1509697909.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:49.456Z,1509697909.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:49.835Z,1509697909.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:49.855Z,1509697909.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:50.238Z,1509697910.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:50.246Z,1509697910.246 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T08:31:50.246Z,1509697910.246 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:31:50.246Z,1509697910.246 [BPC1](ERROR): Data Fault
2017-11-03T08:31:50.255Z,1509697910.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:50.357Z,1509697910.357 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:31:50.638Z,1509697910.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:50.652Z,1509697910.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:51.038Z,1509697911.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:51.053Z,1509697911.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:51.442Z,1509697911.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:51.457Z,1509697911.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:51.557Z,1509697911.557 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:31:51.557Z,1509697911.557 [BPC1] No Fault, FailCount= 1
2017-11-03T08:31:51.857Z,1509697911.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:51.938Z,1509697911.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:52.241Z,1509697912.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:52.257Z,1509697912.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:52.631Z,1509697912.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:52.690Z,1509697912.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:53.033Z,1509697913.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:53.048Z,1509697913.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:53.437Z,1509697913.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:53.452Z,1509697913.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:53.844Z,1509697913.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:53.859Z,1509697913.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:54.239Z,1509697914.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:54.254Z,1509697914.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:54.641Z,1509697914.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:54.663Z,1509697914.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:55.045Z,1509697915.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:55.061Z,1509697915.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:55.441Z,1509697915.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:55.462Z,1509697915.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:55.836Z,1509697915.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:55.851Z,1509697915.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:56.226Z,1509697916.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:56.248Z,1509697916.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:56.325Z,1509697916.325 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T08:31:56.637Z,1509697916.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:56.652Z,1509697916.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:57.038Z,1509697917.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:57.053Z,1509697917.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:57.442Z,1509697917.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:57.457Z,1509697917.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:57.845Z,1509697917.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:57.859Z,1509697917.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:58.285Z,1509697918.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:58.338Z,1509697918.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:58.631Z,1509697918.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:58.646Z,1509697918.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:59.035Z,1509697919.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:59.050Z,1509697919.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:59.436Z,1509697919.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:59.451Z,1509697919.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:31:59.838Z,1509697919.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:31:59.853Z,1509697919.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:00.265Z,1509697920.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:00.299Z,1509697920.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:00.641Z,1509697920.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:00.657Z,1509697920.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:01.045Z,1509697921.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:01.061Z,1509697921.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:01.441Z,1509697921.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:01.456Z,1509697921.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:01.840Z,1509697921.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:01.855Z,1509697921.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:02.236Z,1509697922.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:02.251Z,1509697922.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:02.637Z,1509697922.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:02.653Z,1509697922.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:03.037Z,1509697923.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:03.052Z,1509697923.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:03.442Z,1509697923.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:03.457Z,1509697923.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:03.853Z,1509697923.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:03.883Z,1509697923.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:04.242Z,1509697924.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:04.257Z,1509697924.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:04.638Z,1509697924.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:04.654Z,1509697924.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:05.037Z,1509697925.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:05.115Z,1509697925.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:05.437Z,1509697925.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:05.452Z,1509697925.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:05.835Z,1509697925.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:05.891Z,1509697925.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:06.236Z,1509697926.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:06.251Z,1509697926.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:06.642Z,1509697926.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:06.691Z,1509697926.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:07.039Z,1509697927.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:07.094Z,1509697927.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:07.439Z,1509697927.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:07.454Z,1509697927.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:07.846Z,1509697927.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:07.862Z,1509697927.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:08.231Z,1509697928.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:08.247Z,1509697928.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:08.637Z,1509697928.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:08.652Z,1509697928.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:09.040Z,1509697929.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:09.055Z,1509697929.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:09.442Z,1509697929.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:09.457Z,1509697929.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:09.841Z,1509697929.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:09.856Z,1509697929.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:10.240Z,1509697930.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:10.262Z,1509697930.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:10.638Z,1509697930.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:10.653Z,1509697930.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:11.037Z,1509697931.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:11.051Z,1509697931.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:11.436Z,1509697931.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:11.451Z,1509697931.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:11.838Z,1509697931.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:11.853Z,1509697931.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:12.296Z,1509697932.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:12.337Z,1509697932.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:12.642Z,1509697932.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:12.657Z,1509697932.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:13.045Z,1509697933.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:13.060Z,1509697933.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:13.441Z,1509697933.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:13.462Z,1509697933.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:13.835Z,1509697933.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:13.850Z,1509697933.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:14.279Z,1509697934.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:14.311Z,1509697934.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:14.637Z,1509697934.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:14.652Z,1509697934.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:15.036Z,1509697935.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:15.051Z,1509697935.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:15.444Z,1509697935.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:15.459Z,1509697935.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:15.857Z,1509697935.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:15.887Z,1509697935.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:16.244Z,1509697936.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:16.260Z,1509697936.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:16.638Z,1509697936.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:16.659Z,1509697936.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:17.036Z,1509697937.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:17.051Z,1509697937.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:17.439Z,1509697937.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:17.459Z,1509697937.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:17.840Z,1509697937.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:17.855Z,1509697937.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:18.238Z,1509697938.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:18.253Z,1509697938.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:18.646Z,1509697938.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:18.661Z,1509697938.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:19.045Z,1509697939.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:19.122Z,1509697939.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:19.449Z,1509697939.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:19.464Z,1509697939.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:19.848Z,1509697939.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:19.899Z,1509697939.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:20.225Z,1509697940.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:20.259Z,1509697940.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:20.641Z,1509697940.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:20.692Z,1509697940.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:21.025Z,1509697941.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:21.052Z,1509697941.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:21.447Z,1509697941.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:21.499Z,1509697941.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:21.856Z,1509697941.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:21.894Z,1509697941.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:22.251Z,1509697942.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:22.266Z,1509697942.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:22.639Z,1509697942.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:22.659Z,1509697942.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:23.028Z,1509697943.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:23.055Z,1509697943.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:23.438Z,1509697943.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:23.454Z,1509697943.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:23.839Z,1509697943.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:23.855Z,1509697943.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:24.246Z,1509697944.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:24.267Z,1509697944.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:27.456Z,1509697947.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:27.471Z,1509697947.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:27.612Z,1509697947.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:27.654Z,1509697947.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:28.007Z,1509697948.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:28.030Z,1509697948.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:28.403Z,1509697948.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:28.423Z,1509697948.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:28.800Z,1509697948.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:28.818Z,1509697948.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:29.200Z,1509697949.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:29.246Z,1509697949.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:29.608Z,1509697949.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:29.628Z,1509697949.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:30.005Z,1509697950.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:30.035Z,1509697950.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:30.408Z,1509697950.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:30.434Z,1509697950.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:30.793Z,1509697950.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:30.842Z,1509697950.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:31.195Z,1509697951.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:31.211Z,1509697951.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:31.599Z,1509697951.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:31.635Z,1509697951.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:32.015Z,1509697952.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:32.030Z,1509697952.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:32.413Z,1509697952.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:32.458Z,1509697952.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:32.814Z,1509697952.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:32.833Z,1509697952.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:33.217Z,1509697953.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:33.232Z,1509697953.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:33.589Z,1509697953.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:33.646Z,1509697953.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:33.992Z,1509697953.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:34.022Z,1509697954.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:34.396Z,1509697954.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:34.427Z,1509697954.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:34.790Z,1509697954.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:34.821Z,1509697954.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:35.192Z,1509697955.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:35.232Z,1509697955.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:35.615Z,1509697955.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:35.633Z,1509697955.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:36.027Z,1509697956.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:36.047Z,1509697956.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:36.415Z,1509697956.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:36.438Z,1509697956.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:36.799Z,1509697956.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:36.823Z,1509697956.823 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:32:36.823Z,1509697956.823 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:32:36.823Z,1509697956.823 [BPC1](ERROR): Communications Fault
2017-11-03T08:32:36.831Z,1509697956.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:36.933Z,1509697956.933 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:32:37.195Z,1509697957.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:37.224Z,1509697957.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:37.594Z,1509697957.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:37.630Z,1509697957.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:38.022Z,1509697958.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:38.059Z,1509697958.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:38.149Z,1509697958.149 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:32:38.149Z,1509697958.149 [BPC1] No Fault, FailCount= 1
2017-11-03T08:32:38.412Z,1509697958.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:38.499Z,1509697958.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:38.806Z,1509697958.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:38.846Z,1509697958.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:39.206Z,1509697959.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:39.243Z,1509697959.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:39.593Z,1509697959.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:39.610Z,1509697959.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:39.992Z,1509697959.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:40.025Z,1509697960.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:40.398Z,1509697960.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:40.439Z,1509697960.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:40.800Z,1509697960.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:40.815Z,1509697960.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:41.195Z,1509697961.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:41.214Z,1509697961.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:41.611Z,1509697961.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:41.639Z,1509697961.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:42.009Z,1509697962.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:42.044Z,1509697962.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:42.413Z,1509697962.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:42.439Z,1509697962.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:42.795Z,1509697962.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:42.858Z,1509697962.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:43.195Z,1509697963.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:43.214Z,1509697963.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:43.596Z,1509697963.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:43.611Z,1509697963.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:43.991Z,1509697963.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:44.029Z,1509697964.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:44.415Z,1509697964.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:44.431Z,1509697964.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:44.815Z,1509697964.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:44.830Z,1509697964.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:45.209Z,1509697965.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:45.240Z,1509697965.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:45.586Z,1509697965.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:45.618Z,1509697965.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:45.991Z,1509697965.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:46.020Z,1509697966.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:46.395Z,1509697966.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:46.425Z,1509697966.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:46.789Z,1509697966.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:46.815Z,1509697966.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:47.192Z,1509697967.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:47.227Z,1509697967.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:47.615Z,1509697967.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:47.638Z,1509697967.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:48.017Z,1509697968.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:48.032Z,1509697968.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:48.413Z,1509697968.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:48.457Z,1509697968.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:48.789Z,1509697968.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:48.823Z,1509697968.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:49.189Z,1509697969.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:49.204Z,1509697969.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:49.593Z,1509697969.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:49.630Z,1509697969.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:49.995Z,1509697969.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:50.034Z,1509697970.034 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:50.034Z,1509697970.034 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 166
2017-11-03T08:32:50.035Z,1509697970.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:32:50.042Z,1509697970.042 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:50.042Z,1509697970.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 166
2017-11-03T08:32:50.042Z,1509697970.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:32:50.044Z,1509697970.044 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:50.044Z,1509697970.044 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 166
2017-11-03T08:32:50.044Z,1509697970.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:32:50.125Z,1509697970.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:32:50.125Z,1509697970.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:32:50.126Z,1509697970.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:32:50.410Z,1509697970.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:50.529Z,1509697970.529 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:32:50.529Z,1509697970.529 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 166
2017-11-03T08:32:50.530Z,1509697970.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:32:50.530Z,1509697970.530 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 166
2017-11-03T08:32:50.530Z,1509697970.530 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:32:50.531Z,1509697970.531 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 166
2017-11-03T08:32:50.816Z,1509697970.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:50.839Z,1509697970.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:32:50.839Z,1509697970.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:32:50.839Z,1509697970.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:32:50.840Z,1509697970.840 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:32:50.840Z,1509697970.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:32:50.841Z,1509697970.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:32:50.841Z,1509697970.841 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:32:50.842Z,1509697970.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:32:50.842Z,1509697970.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:32:51.212Z,1509697971.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:51.238Z,1509697971.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:51.592Z,1509697971.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:51.641Z,1509697971.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:52.019Z,1509697972.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:52.055Z,1509697972.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:52.403Z,1509697972.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:52.444Z,1509697972.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:52.804Z,1509697972.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:52.812Z,1509697972.812 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-11-03T08:32:52.850Z,1509697972.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:53.203Z,1509697973.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:53.243Z,1509697973.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:53.605Z,1509697973.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:53.666Z,1509697973.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:54.012Z,1509697974.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:54.045Z,1509697974.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:54.422Z,1509697974.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:54.444Z,1509697974.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:54.801Z,1509697974.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:54.843Z,1509697974.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:55.200Z,1509697975.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:55.251Z,1509697975.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:55.601Z,1509697975.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:55.621Z,1509697975.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:56.006Z,1509697976.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:56.055Z,1509697976.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:56.406Z,1509697976.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:56.462Z,1509697976.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:56.809Z,1509697976.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:56.847Z,1509697976.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:57.205Z,1509697977.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:57.225Z,1509697977.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:57.605Z,1509697977.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:57.621Z,1509697977.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:57.991Z,1509697977.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:58.034Z,1509697978.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:58.403Z,1509697978.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:58.428Z,1509697978.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:58.801Z,1509697978.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:58.821Z,1509697978.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:59.204Z,1509697979.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:59.221Z,1509697979.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:32:59.613Z,1509697979.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:32:59.652Z,1509697979.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:00.009Z,1509697980.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:00.040Z,1509697980.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:00.406Z,1509697980.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:00.435Z,1509697980.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:00.792Z,1509697980.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:00.835Z,1509697980.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:01.193Z,1509697981.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:01.207Z,1509697981.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:01.592Z,1509697981.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:01.607Z,1509697981.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:01.995Z,1509697981.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:02.011Z,1509697982.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:02.407Z,1509697982.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:02.438Z,1509697982.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:02.805Z,1509697982.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:02.841Z,1509697982.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:03.204Z,1509697983.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:03.241Z,1509697983.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:03.592Z,1509697983.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:03.607Z,1509697983.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:04.005Z,1509697984.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:04.029Z,1509697984.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:04.392Z,1509697984.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:04.439Z,1509697984.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:04.794Z,1509697984.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:04.834Z,1509697984.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:05.193Z,1509697985.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:05.209Z,1509697985.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:05.612Z,1509697985.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:05.635Z,1509697985.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:06.036Z,1509697986.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:06.052Z,1509697986.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:06.406Z,1509697986.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:06.443Z,1509697986.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:06.788Z,1509697986.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:06.858Z,1509697986.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:07.193Z,1509697987.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:07.212Z,1509697987.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:07.596Z,1509697987.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:07.641Z,1509697987.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:07.999Z,1509697987.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:08.014Z,1509697988.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:08.417Z,1509697988.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:08.440Z,1509697988.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:08.812Z,1509697988.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:08.867Z,1509697988.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:09.209Z,1509697989.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:09.246Z,1509697989.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:09.596Z,1509697989.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:09.646Z,1509697989.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:09.996Z,1509697989.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:10.019Z,1509697990.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:10.408Z,1509697990.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:10.459Z,1509697990.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:10.797Z,1509697990.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:10.855Z,1509697990.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:11.196Z,1509697991.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:11.211Z,1509697991.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:11.611Z,1509697991.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:11.635Z,1509697991.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:12.011Z,1509697992.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:12.042Z,1509697992.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:12.413Z,1509697992.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:12.446Z,1509697992.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:12.792Z,1509697992.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:12.832Z,1509697992.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:13.193Z,1509697993.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:13.230Z,1509697993.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:13.595Z,1509697993.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:13.626Z,1509697993.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:14.006Z,1509697994.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:14.046Z,1509697994.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:14.405Z,1509697994.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:14.435Z,1509697994.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:14.815Z,1509697994.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:14.843Z,1509697994.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:15.213Z,1509697995.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:15.237Z,1509697995.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:15.592Z,1509697995.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:15.640Z,1509697995.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:15.994Z,1509697995.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:16.028Z,1509697996.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:16.401Z,1509697996.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:16.422Z,1509697996.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:16.796Z,1509697996.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:16.817Z,1509697996.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:17.199Z,1509697997.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:17.216Z,1509697997.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:17.605Z,1509697997.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:17.646Z,1509697997.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:17.799Z,1509697997.799 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:33:17.799Z,1509697997.799 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T08:33:17.799Z,1509697997.799 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:33:18.006Z,1509697998.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:18.026Z,1509697998.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:33:18.027Z,1509697998.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:18.125Z,1509697998.125 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:33:18.201Z,1509697998.201 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:33:18.290Z,1509697998.290 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:33:18.420Z,1509697998.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:18.446Z,1509697998.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:33:18.447Z,1509697998.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:18.803Z,1509697998.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:18.844Z,1509697998.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:33:18.845Z,1509697998.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:19.201Z,1509697999.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:19.216Z,1509697999.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:33:19.217Z,1509697999.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:19.601Z,1509697999.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:19.619Z,1509697999.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:33:19.621Z,1509697999.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:19.721Z,1509697999.721 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:33:19.721Z,1509697999.721 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T08:33:19.904Z,1509697999.904 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:33:19.905Z,1509697999.905 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:33:19.905Z,1509697999.905 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:33:19.905Z,1509697999.905 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:33:20.000Z,1509698000.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:20.017Z,1509698000.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:33:20.018Z,1509698000.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:20.407Z,1509698000.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:20.447Z,1509698000.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:33:20.448Z,1509698000.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:20.806Z,1509698000.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:20.845Z,1509698000.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:33:20.846Z,1509698000.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:21.252Z,1509698001.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:21.268Z,1509698001.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:33:21.269Z,1509698001.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:21.595Z,1509698001.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:21.634Z,1509698001.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:33:21.635Z,1509698001.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:22.002Z,1509698002.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:22.071Z,1509698002.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:33:22.072Z,1509698002.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:22.403Z,1509698002.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:22.426Z,1509698002.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:33:22.427Z,1509698002.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:22.803Z,1509698002.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:22.871Z,1509698002.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:33:22.872Z,1509698002.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:23.201Z,1509698003.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:23.221Z,1509698003.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:33:23.222Z,1509698003.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:23.613Z,1509698003.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:23.670Z,1509698003.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:33:23.671Z,1509698003.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:24.039Z,1509698004.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:24.079Z,1509698004.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T08:33:24.086Z,1509698004.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:24.118Z,1509698004.118 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:33:24.224Z,1509698004.224 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:33:24.225Z,1509698004.225 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:33:24.225Z,1509698004.225 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:33:24.226Z,1509698004.226 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:33:24.422Z,1509698004.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:24.490Z,1509698004.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T08:33:24.491Z,1509698004.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:27.784Z,1509698007.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:27.852Z,1509698007.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:27.980Z,1509698007.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:28.023Z,1509698008.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:28.400Z,1509698008.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:28.416Z,1509698008.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:28.812Z,1509698008.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:28.835Z,1509698008.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:29.194Z,1509698009.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:29.227Z,1509698009.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:29.583Z,1509698009.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:29.615Z,1509698009.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:29.982Z,1509698009.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:29.997Z,1509698009.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:30.387Z,1509698010.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:30.422Z,1509698010.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:30.796Z,1509698010.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:30.824Z,1509698010.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:31.187Z,1509698011.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:31.223Z,1509698011.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:31.597Z,1509698011.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:31.627Z,1509698011.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:31.989Z,1509698011.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:32.022Z,1509698012.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:32.393Z,1509698012.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:32.423Z,1509698012.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:32.795Z,1509698012.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:32.822Z,1509698012.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:33.183Z,1509698013.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:33.223Z,1509698013.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:33.586Z,1509698013.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:33.613Z,1509698013.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:33.983Z,1509698013.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:33.999Z,1509698013.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:34.394Z,1509698014.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:34.422Z,1509698014.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:34.825Z,1509698014.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:34.844Z,1509698014.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:35.198Z,1509698015.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:35.226Z,1509698015.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:35.581Z,1509698015.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:35.596Z,1509698015.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:35.979Z,1509698015.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:35.994Z,1509698015.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:36.380Z,1509698016.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:36.395Z,1509698016.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:36.780Z,1509698016.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:36.796Z,1509698016.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:37.186Z,1509698017.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:37.201Z,1509698017.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:37.599Z,1509698017.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:37.627Z,1509698017.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:37.994Z,1509698017.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:38.028Z,1509698018.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:38.393Z,1509698018.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:38.447Z,1509698018.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:38.779Z,1509698018.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:38.842Z,1509698018.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:39.187Z,1509698019.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:39.278Z,1509698019.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:39.589Z,1509698019.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:39.615Z,1509698019.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:39.988Z,1509698019.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:40.043Z,1509698020.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:40.394Z,1509698020.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:40.412Z,1509698020.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:40.798Z,1509698020.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:40.843Z,1509698020.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:41.202Z,1509698021.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:41.280Z,1509698021.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:41.587Z,1509698021.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:41.634Z,1509698021.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:41.988Z,1509698021.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:42.003Z,1509698022.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:42.384Z,1509698022.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:42.402Z,1509698022.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:42.791Z,1509698022.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:42.814Z,1509698022.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:43.189Z,1509698023.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:43.204Z,1509698023.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:43.594Z,1509698023.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:43.611Z,1509698023.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:43.993Z,1509698023.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:44.013Z,1509698024.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:44.392Z,1509698024.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:44.414Z,1509698024.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:44.791Z,1509698024.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:44.810Z,1509698024.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:45.188Z,1509698025.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:45.203Z,1509698025.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:45.589Z,1509698025.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:45.609Z,1509698025.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:45.987Z,1509698025.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:46.002Z,1509698026.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:46.394Z,1509698026.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:46.409Z,1509698026.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:46.798Z,1509698026.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:46.833Z,1509698026.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:47.194Z,1509698027.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:47.213Z,1509698027.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:47.590Z,1509698027.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:47.605Z,1509698027.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:47.993Z,1509698027.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:48.008Z,1509698028.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:48.388Z,1509698028.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:48.403Z,1509698028.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:48.808Z,1509698028.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:48.846Z,1509698028.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:49.189Z,1509698029.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:49.223Z,1509698029.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:49.596Z,1509698029.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:49.612Z,1509698029.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:49.996Z,1509698029.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:50.021Z,1509698030.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:50.399Z,1509698030.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:50.418Z,1509698030.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:50.786Z,1509698030.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:50.819Z,1509698030.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:51.188Z,1509698031.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:51.203Z,1509698031.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:51.592Z,1509698031.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:51.607Z,1509698031.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:51.991Z,1509698031.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:52.080Z,1509698032.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:52.398Z,1509698032.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:52.413Z,1509698032.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:52.798Z,1509698032.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:52.850Z,1509698032.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:53.207Z,1509698033.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:53.299Z,1509698033.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:53.587Z,1509698033.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:53.646Z,1509698033.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:53.991Z,1509698033.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:54.054Z,1509698034.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:54.390Z,1509698034.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:54.411Z,1509698034.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:54.788Z,1509698034.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:54.804Z,1509698034.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:55.184Z,1509698035.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:55.279Z,1509698035.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:55.601Z,1509698035.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:55.651Z,1509698035.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:56.005Z,1509698036.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:56.026Z,1509698036.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:56.401Z,1509698036.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:56.423Z,1509698036.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:56.776Z,1509698036.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:56.815Z,1509698036.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:57.180Z,1509698037.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:57.211Z,1509698037.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:57.583Z,1509698037.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:57.610Z,1509698037.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:57.980Z,1509698037.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:57.995Z,1509698037.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:58.393Z,1509698038.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:58.427Z,1509698038.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:58.793Z,1509698038.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:58.849Z,1509698038.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:59.193Z,1509698039.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:59.229Z,1509698039.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:59.579Z,1509698039.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:59.594Z,1509698039.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:33:59.979Z,1509698039.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:33:59.993Z,1509698039.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:00.379Z,1509698040.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:00.399Z,1509698040.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:00.779Z,1509698040.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:00.799Z,1509698040.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:01.184Z,1509698041.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:01.199Z,1509698041.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:01.593Z,1509698041.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:01.628Z,1509698041.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:02.001Z,1509698042.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:02.026Z,1509698042.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:02.393Z,1509698042.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:02.433Z,1509698042.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:02.805Z,1509698042.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:02.855Z,1509698042.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:03.183Z,1509698043.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:03.223Z,1509698043.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:03.584Z,1509698043.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:03.600Z,1509698043.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:03.987Z,1509698043.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:04.003Z,1509698044.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:04.398Z,1509698044.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:04.431Z,1509698044.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:04.804Z,1509698044.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:04.891Z,1509698044.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:05.197Z,1509698045.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:05.234Z,1509698045.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:05.582Z,1509698045.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:05.643Z,1509698045.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:05.983Z,1509698045.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:05.998Z,1509698045.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:06.387Z,1509698046.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:06.442Z,1509698046.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:06.784Z,1509698046.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:06.845Z,1509698046.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:07.186Z,1509698047.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:07.290Z,1509698047.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:07.597Z,1509698047.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:07.631Z,1509698047.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:07.998Z,1509698047.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:08.031Z,1509698048.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:08.397Z,1509698048.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:08.434Z,1509698048.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:08.780Z,1509698048.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:08.795Z,1509698048.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:09.183Z,1509698049.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:09.267Z,1509698049.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:09.589Z,1509698049.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:09.609Z,1509698049.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:09.988Z,1509698049.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:10.003Z,1509698050.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:10.402Z,1509698050.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:10.437Z,1509698050.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:10.793Z,1509698050.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:10.834Z,1509698050.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:11.194Z,1509698051.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:11.213Z,1509698051.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:11.587Z,1509698051.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:11.607Z,1509698051.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:11.990Z,1509698051.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:12.005Z,1509698052.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:12.384Z,1509698052.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:12.399Z,1509698052.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:12.792Z,1509698052.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:12.811Z,1509698052.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:13.189Z,1509698053.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:13.204Z,1509698053.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:13.590Z,1509698053.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:13.606Z,1509698053.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:14.001Z,1509698054.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:14.035Z,1509698054.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:14.394Z,1509698054.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:14.434Z,1509698054.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:14.789Z,1509698054.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:14.804Z,1509698054.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:15.188Z,1509698055.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:15.207Z,1509698055.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:15.589Z,1509698055.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:15.605Z,1509698055.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:15.989Z,1509698055.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:16.009Z,1509698056.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:16.402Z,1509698056.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:16.439Z,1509698056.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:16.842Z,1509698056.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:16.860Z,1509698056.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:17.202Z,1509698057.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:17.232Z,1509698057.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:17.587Z,1509698057.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:17.669Z,1509698057.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:17.990Z,1509698057.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:18.005Z,1509698058.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:18.390Z,1509698058.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:18.446Z,1509698058.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:18.789Z,1509698058.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:18.804Z,1509698058.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:19.182Z,1509698059.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:19.234Z,1509698059.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:19.594Z,1509698059.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:19.647Z,1509698059.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:19.997Z,1509698059.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:20.036Z,1509698060.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:20.396Z,1509698060.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:20.416Z,1509698060.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:20.790Z,1509698060.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:20.810Z,1509698060.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:21.190Z,1509698061.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:21.264Z,1509698061.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:21.591Z,1509698061.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:21.606Z,1509698061.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:21.984Z,1509698061.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:21.000Z,1509698062.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:22.402Z,1509698062.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:22.419Z,1509698062.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:22.800Z,1509698062.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:22.823Z,1509698062.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:23.204Z,1509698063.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:23.267Z,1509698063.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:23.588Z,1509698063.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:23.623Z,1509698063.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:23.988Z,1509698063.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:24.017Z,1509698064.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:24.389Z,1509698064.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:24.404Z,1509698064.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:24.780Z,1509698064.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:24.806Z,1509698064.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:27.997Z,1509698067.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:28.012Z,1509698068.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:28.150Z,1509698068.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:28.165Z,1509698068.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:28.553Z,1509698068.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:28.569Z,1509698068.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:28.957Z,1509698068.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:28.972Z,1509698068.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:29.331Z,1509698069.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:29.358Z,1509698069.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:29.729Z,1509698069.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:29.755Z,1509698069.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:30.129Z,1509698070.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:30.155Z,1509698070.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:30.549Z,1509698070.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:30.632Z,1509698070.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:30.949Z,1509698070.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:30.971Z,1509698070.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:31.350Z,1509698071.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:31.365Z,1509698071.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:31.731Z,1509698071.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:31.798Z,1509698071.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:32.129Z,1509698072.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:32.163Z,1509698072.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:32.530Z,1509698072.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:32.579Z,1509698072.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:32.976Z,1509698072.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:33.028Z,1509698073.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:33.349Z,1509698073.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:33.364Z,1509698073.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:33.750Z,1509698073.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:33.770Z,1509698073.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:34.149Z,1509698074.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:34.165Z,1509698074.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:34.530Z,1509698074.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:34.555Z,1509698074.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:34.929Z,1509698074.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:34.967Z,1509698074.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:35.342Z,1509698075.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:35.357Z,1509698075.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:35.749Z,1509698075.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:35.764Z,1509698075.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:36.150Z,1509698076.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:36.165Z,1509698076.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:36.526Z,1509698076.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:36.551Z,1509698076.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:36.929Z,1509698076.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:36.956Z,1509698076.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:37.346Z,1509698077.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:37.361Z,1509698077.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:37.752Z,1509698077.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:37.767Z,1509698077.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:38.149Z,1509698078.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:38.164Z,1509698078.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:38.532Z,1509698078.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:38.557Z,1509698078.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:38.923Z,1509698078.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:38.954Z,1509698078.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:39.349Z,1509698079.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:39.364Z,1509698079.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:39.750Z,1509698079.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:39.765Z,1509698079.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:40.149Z,1509698080.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:40.164Z,1509698080.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:40.541Z,1509698080.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:40.557Z,1509698080.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:40.927Z,1509698080.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:40.954Z,1509698080.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:41.346Z,1509698081.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:41.361Z,1509698081.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:41.750Z,1509698081.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:41.765Z,1509698081.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:42.150Z,1509698082.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:42.165Z,1509698082.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:42.530Z,1509698082.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:42.557Z,1509698082.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:42.944Z,1509698082.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:42.959Z,1509698082.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:43.351Z,1509698083.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:43.366Z,1509698083.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:43.754Z,1509698083.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:43.840Z,1509698083.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:44.150Z,1509698084.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:44.165Z,1509698084.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:44.532Z,1509698084.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:44.583Z,1509698084.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:44.928Z,1509698084.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:44.958Z,1509698084.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:45.352Z,1509698085.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:45.414Z,1509698085.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:45.747Z,1509698085.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:45.800Z,1509698085.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:46.151Z,1509698086.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:46.166Z,1509698086.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:46.530Z,1509698086.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:46.558Z,1509698086.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:46.979Z,1509698086.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:47.025Z,1509698087.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:47.350Z,1509698087.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:47.367Z,1509698087.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:47.753Z,1509698087.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:47.771Z,1509698087.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:48.145Z,1509698088.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:48.160Z,1509698088.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:48.541Z,1509698088.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:48.556Z,1509698088.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:48.929Z,1509698088.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:48.956Z,1509698088.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:49.345Z,1509698089.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:49.360Z,1509698089.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:49.749Z,1509698089.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:49.764Z,1509698089.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:50.149Z,1509698090.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:50.165Z,1509698090.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:50.542Z,1509698090.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:50.557Z,1509698090.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:50.931Z,1509698090.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:50.957Z,1509698090.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:51.356Z,1509698091.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:51.371Z,1509698091.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:51.750Z,1509698091.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:51.765Z,1509698091.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:52.149Z,1509698092.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:52.164Z,1509698092.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:52.530Z,1509698092.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:52.555Z,1509698092.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:52.927Z,1509698092.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:52.967Z,1509698092.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:53.349Z,1509698093.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:53.365Z,1509698093.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:53.748Z,1509698093.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:53.763Z,1509698093.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:54.149Z,1509698094.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:54.170Z,1509698094.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:54.541Z,1509698094.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:54.557Z,1509698094.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:54.927Z,1509698094.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:54.953Z,1509698094.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:55.350Z,1509698095.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:55.365Z,1509698095.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:55.752Z,1509698095.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:55.767Z,1509698095.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:56.149Z,1509698096.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:56.164Z,1509698096.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:56.530Z,1509698096.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:56.556Z,1509698096.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:56.927Z,1509698096.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:57.014Z,1509698097.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:57.348Z,1509698097.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:57.363Z,1509698097.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:57.753Z,1509698097.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:57.804Z,1509698097.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:58.149Z,1509698098.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:58.164Z,1509698098.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:58.529Z,1509698098.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:58.587Z,1509698098.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:58.927Z,1509698098.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:58.979Z,1509698098.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:59.348Z,1509698099.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:59.371Z,1509698099.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:34:59.749Z,1509698099.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:34:59.764Z,1509698099.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:00.146Z,1509698100.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:00.160Z,1509698100.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:00.532Z,1509698100.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:00.558Z,1509698100.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:00.967Z,1509698100.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:01.003Z,1509698101.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:01.346Z,1509698101.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:01.370Z,1509698101.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:01.749Z,1509698101.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:01.779Z,1509698101.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:02.146Z,1509698102.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:02.169Z,1509698102.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:02.533Z,1509698102.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:02.548Z,1509698102.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:02.935Z,1509698102.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:02.971Z,1509698102.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:03.360Z,1509698103.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:03.375Z,1509698103.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:03.746Z,1509698103.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:03.770Z,1509698103.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:04.142Z,1509698104.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:04.191Z,1509698104.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:04.535Z,1509698104.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:04.574Z,1509698104.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:04.933Z,1509698104.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:04.947Z,1509698104.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:05.361Z,1509698105.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:05.383Z,1509698105.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:05.746Z,1509698105.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:05.770Z,1509698105.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:06.146Z,1509698106.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:06.170Z,1509698106.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:06.535Z,1509698106.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:06.571Z,1509698106.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:06.935Z,1509698106.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:06.955Z,1509698106.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:07.345Z,1509698107.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:07.381Z,1509698107.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:07.745Z,1509698107.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:07.772Z,1509698107.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:08.142Z,1509698108.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:08.163Z,1509698108.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:08.538Z,1509698108.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:08.553Z,1509698108.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:08.935Z,1509698108.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:08.955Z,1509698108.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:09.341Z,1509698109.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:09.357Z,1509698109.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:09.749Z,1509698109.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:09.803Z,1509698109.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:10.142Z,1509698110.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:10.157Z,1509698110.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:10.537Z,1509698110.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:10.553Z,1509698110.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:10.936Z,1509698110.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:10.994Z,1509698110.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:11.342Z,1509698111.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:11.357Z,1509698111.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:11.741Z,1509698111.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:11.793Z,1509698111.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:12.142Z,1509698112.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:12.191Z,1509698112.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:12.539Z,1509698112.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:12.554Z,1509698112.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:12.932Z,1509698112.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:12.952Z,1509698112.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:13.342Z,1509698113.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:13.357Z,1509698113.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:13.745Z,1509698113.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:13.761Z,1509698113.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:14.144Z,1509698114.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:14.159Z,1509698114.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:14.541Z,1509698114.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:14.556Z,1509698114.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:14.979Z,1509698114.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:15.007Z,1509698115.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:15.348Z,1509698115.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:15.363Z,1509698115.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:15.749Z,1509698115.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:15.764Z,1509698115.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:16.148Z,1509698116.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:16.163Z,1509698116.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:16.537Z,1509698116.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:16.552Z,1509698116.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:16.937Z,1509698116.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:16.953Z,1509698116.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:17.345Z,1509698117.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:17.360Z,1509698117.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:17.749Z,1509698117.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:17.771Z,1509698117.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:18.149Z,1509698118.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:18.164Z,1509698118.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:18.541Z,1509698118.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:18.556Z,1509698118.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:18.938Z,1509698118.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:18.956Z,1509698118.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:19.346Z,1509698119.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:19.390Z,1509698119.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:19.749Z,1509698119.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:19.764Z,1509698119.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:20.064Z,1509698120.064 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:35:20.064Z,1509698120.064 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T08:35:20.064Z,1509698120.064 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:35:20.150Z,1509698120.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:20.165Z,1509698120.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:35:20.166Z,1509698120.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:20.269Z,1509698120.269 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:35:20.269Z,1509698120.269 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T08:35:20.468Z,1509698120.468 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:35:20.548Z,1509698120.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:20.594Z,1509698120.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:35:20.595Z,1509698120.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:20.742Z,1509698120.742 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:35:20.945Z,1509698120.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:20.960Z,1509698120.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:35:20.961Z,1509698120.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:21.350Z,1509698121.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:21.370Z,1509698121.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:35:21.371Z,1509698121.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:21.754Z,1509698121.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:21.769Z,1509698121.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:35:21.770Z,1509698121.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:22.150Z,1509698122.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:22.167Z,1509698122.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:35:22.168Z,1509698122.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:22.538Z,1509698122.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:22.559Z,1509698122.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:35:22.560Z,1509698122.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:22.942Z,1509698122.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:22.998Z,1509698122.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:35:22.999Z,1509698122.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:23.352Z,1509698123.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:23.367Z,1509698123.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:35:23.367Z,1509698123.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:23.753Z,1509698123.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:23.768Z,1509698123.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:35:23.769Z,1509698123.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:24.151Z,1509698124.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:24.166Z,1509698124.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:35:24.167Z,1509698124.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:24.171Z,1509698124.171 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T08:30:23.8Z
2017-11-03T08:35:24.171Z,1509698124.171 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T08:35:24.171Z,1509698124.171 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T08:35:24.532Z,1509698124.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:24.606Z,1509698124.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:35:24.607Z,1509698124.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:25.047Z,1509698125.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:25.066Z,1509698125.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T08:35:25.067Z,1509698125.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:28.058Z,1509698128.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:28.110Z,1509698128.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-03T08:35:28.111Z,1509698128.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:28.217Z,1509698128.217 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20171103T001125/Courier0196.lzma
2017-11-03T08:35:28.266Z,1509698128.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:28.306Z,1509698128.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T08:35:28.307Z,1509698128.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:28.658Z,1509698128.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:28.706Z,1509698128.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T08:35:28.707Z,1509698128.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:29.019Z,1509698129.019 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0196.lzma.bak
2017-11-03T08:35:29.019Z,1509698129.019 [DataOverHttps](INFO): SBD MOMSN=5183136
2017-11-03T08:35:29.057Z,1509698129.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:29.113Z,1509698129.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T08:35:29.114Z,1509698129.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:29.657Z,1509698129.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:29.672Z,1509698129.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-03T08:35:29.673Z,1509698129.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:29.848Z,1509698129.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:29.882Z,1509698129.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T08:35:29.883Z,1509698129.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:33.051Z,1509698133.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:33.066Z,1509698133.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T08:35:33.067Z,1509698133.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:33.214Z,1509698133.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:33.254Z,1509698133.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-03T08:35:33.255Z,1509698133.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:33.608Z,1509698133.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:33.626Z,1509698133.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-03T08:35:33.627Z,1509698133.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:34.003Z,1509698134.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:34.021Z,1509698134.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-03T08:35:34.022Z,1509698134.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:34.381Z,1509698134.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:34.421Z,1509698134.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-03T08:35:34.422Z,1509698134.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:34.801Z,1509698134.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:34.815Z,1509698134.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T08:35:34.816Z,1509698134.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:37.919Z,1509698137.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:37.933Z,1509698137.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T08:35:37.934Z,1509698137.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:38.065Z,1509698138.065 [DataOverHttps](INFO): Sending 269 bytes from file Logs/20171103T001125/Express0197.lzma
2017-11-03T08:35:38.115Z,1509698138.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:38.134Z,1509698138.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:35:38.135Z,1509698138.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:38.506Z,1509698138.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:38.523Z,1509698138.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:35:38.524Z,1509698138.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:38.863Z,1509698138.863 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0197.lzma.bak
2017-11-03T08:35:38.863Z,1509698138.863 [DataOverHttps](INFO): SBD MOMSN=5183141
2017-11-03T08:35:38.918Z,1509698138.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:38.953Z,1509698138.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:35:38.954Z,1509698138.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:39.500Z,1509698139.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:39.516Z,1509698139.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T08:35:39.517Z,1509698139.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:39.521Z,1509698139.521 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T08:35:39.521Z,1509698139.521 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T08:35:39.521Z,1509698139.521 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T08:35:39.688Z,1509698139.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:39.714Z,1509698139.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-03T08:35:39.714Z,1509698139.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:42.900Z,1509698142.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:42.988Z,1509698142.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:43.130Z,1509698143.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:43.170Z,1509698143.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:43.525Z,1509698143.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:43.557Z,1509698143.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:43.925Z,1509698143.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:43.974Z,1509698143.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:44.311Z,1509698144.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:44.326Z,1509698144.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:44.712Z,1509698144.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:44.760Z,1509698144.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:45.111Z,1509698145.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:45.156Z,1509698145.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:45.525Z,1509698145.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:45.554Z,1509698145.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:45.925Z,1509698145.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:45.956Z,1509698145.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:46.325Z,1509698146.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:46.354Z,1509698146.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:46.711Z,1509698146.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:46.726Z,1509698146.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:47.111Z,1509698147.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:47.126Z,1509698147.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:47.512Z,1509698147.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:47.526Z,1509698147.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:47.911Z,1509698147.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:47.926Z,1509698147.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:48.325Z,1509698148.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:48.356Z,1509698148.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:48.725Z,1509698148.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:48.755Z,1509698148.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:49.126Z,1509698149.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:49.154Z,1509698149.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:49.512Z,1509698149.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:49.527Z,1509698149.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:49.911Z,1509698149.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:49.926Z,1509698149.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:50.325Z,1509698150.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:50.355Z,1509698150.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:50.725Z,1509698150.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:50.758Z,1509698150.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:51.125Z,1509698151.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:51.155Z,1509698151.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:51.155Z,1509698151.155 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 167
2017-11-03T08:35:51.155Z,1509698151.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:35:51.157Z,1509698151.157 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:51.157Z,1509698151.157 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 167
2017-11-03T08:35:51.158Z,1509698151.158 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:35:51.159Z,1509698151.159 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:51.159Z,1509698151.159 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 167
2017-11-03T08:35:51.160Z,1509698151.160 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:35:51.256Z,1509698151.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:35:51.257Z,1509698151.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:35:51.257Z,1509698151.257 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:35:51.516Z,1509698151.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:51.609Z,1509698151.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:35:51.609Z,1509698151.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 167
2017-11-03T08:35:51.610Z,1509698151.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:35:51.610Z,1509698151.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 167
2017-11-03T08:35:51.611Z,1509698151.611 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:35:51.611Z,1509698151.611 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 167
2017-11-03T08:35:51.912Z,1509698151.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:51.927Z,1509698151.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:35:51.927Z,1509698151.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:35:51.927Z,1509698151.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:35:51.928Z,1509698151.928 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:35:51.928Z,1509698151.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:35:51.929Z,1509698151.929 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:35:51.929Z,1509698151.929 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:35:51.930Z,1509698151.930 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:35:51.930Z,1509698151.930 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:35:52.320Z,1509698152.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:52.335Z,1509698152.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:35:52.336Z,1509698152.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:52.726Z,1509698152.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:52.740Z,1509698152.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:35:52.741Z,1509698152.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:53.119Z,1509698153.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:53.138Z,1509698153.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:35:53.139Z,1509698153.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:53.518Z,1509698153.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:53.533Z,1509698153.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:35:53.534Z,1509698153.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:53.918Z,1509698153.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:53.933Z,1509698153.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:35:53.934Z,1509698153.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:54.322Z,1509698154.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:54.336Z,1509698154.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:35:54.337Z,1509698154.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:54.725Z,1509698154.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:54.739Z,1509698154.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:35:54.741Z,1509698154.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:55.119Z,1509698155.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:55.138Z,1509698155.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:35:55.139Z,1509698155.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:55.516Z,1509698155.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:55.578Z,1509698155.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:35:55.579Z,1509698155.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:55.918Z,1509698155.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:55.944Z,1509698155.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:35:55.945Z,1509698155.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:56.316Z,1509698156.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:56.324Z,1509698156.324 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:35:56.325Z,1509698156.325 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:35:56.325Z,1509698156.325 [BPC1](ERROR): Data Fault
2017-11-03T08:35:56.340Z,1509698156.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:35:56.341Z,1509698156.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:56.419Z,1509698156.419 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:35:56.730Z,1509698156.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:56.745Z,1509698156.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:35:56.746Z,1509698156.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:57.138Z,1509698157.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:57.163Z,1509698157.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:35:57.164Z,1509698157.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:57.532Z,1509698157.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:57.551Z,1509698157.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:35:57.551Z,1509698157.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:57.665Z,1509698157.665 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:35:57.665Z,1509698157.665 [BPC1] No Fault, FailCount= 1
2017-11-03T08:35:57.930Z,1509698157.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:58.046Z,1509698158.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T08:35:58.047Z,1509698158.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:58.313Z,1509698158.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:58.370Z,1509698158.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:35:58.371Z,1509698158.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:58.711Z,1509698158.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:58.755Z,1509698158.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:35:58.756Z,1509698158.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:59.112Z,1509698159.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:59.191Z,1509698159.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:35:59.191Z,1509698159.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:59.538Z,1509698159.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:59.552Z,1509698159.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:35:59.553Z,1509698159.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:35:59.946Z,1509698159.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:35:59.982Z,1509698159.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T08:35:59.983Z,1509698159.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:00.330Z,1509698160.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:00.344Z,1509698160.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:36:00.345Z,1509698160.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:00.722Z,1509698160.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:00.775Z,1509698160.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:36:00.776Z,1509698160.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:01.110Z,1509698161.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:01.154Z,1509698161.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:36:01.155Z,1509698161.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:01.513Z,1509698161.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:01.536Z,1509698161.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:36:01.545Z,1509698161.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:01.913Z,1509698161.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:01.959Z,1509698161.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:36:01.960Z,1509698161.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:02.308Z,1509698162.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:02.344Z,1509698162.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:36:02.349Z,1509698162.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:02.727Z,1509698162.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:02.755Z,1509698162.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:36:02.756Z,1509698162.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:03.131Z,1509698163.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:03.154Z,1509698163.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:36:03.155Z,1509698163.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:03.531Z,1509698163.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:03.643Z,1509698163.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T08:36:03.644Z,1509698163.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:03.909Z,1509698163.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:03.948Z,1509698163.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:36:03.954Z,1509698163.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:04.308Z,1509698164.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:04.366Z,1509698164.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:36:04.367Z,1509698164.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:04.712Z,1509698164.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:04.754Z,1509698164.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:36:04.755Z,1509698164.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:05.108Z,1509698165.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:05.155Z,1509698165.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:36:05.165Z,1509698165.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:05.520Z,1509698165.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:05.571Z,1509698165.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:36:05.572Z,1509698165.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:05.924Z,1509698165.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:05.998Z,1509698165.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:36:05.999Z,1509698165.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:06.319Z,1509698166.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:06.355Z,1509698166.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:36:06.356Z,1509698166.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:06.709Z,1509698166.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:06.753Z,1509698166.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:36:06.754Z,1509698166.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:07.108Z,1509698167.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:07.123Z,1509698167.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:36:07.124Z,1509698167.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:07.531Z,1509698167.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:07.567Z,1509698167.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:36:07.568Z,1509698167.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:07.917Z,1509698167.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:07.936Z,1509698167.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:36:07.961Z,1509698167.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:08.322Z,1509698168.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:08.366Z,1509698168.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:36:08.367Z,1509698168.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:08.723Z,1509698168.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:08.766Z,1509698168.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:36:08.767Z,1509698168.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:09.122Z,1509698169.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:09.143Z,1509698169.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:36:09.144Z,1509698169.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:09.517Z,1509698169.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:09.544Z,1509698169.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:36:09.565Z,1509698169.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:09.914Z,1509698169.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:09.945Z,1509698169.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:36:09.946Z,1509698169.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:10.317Z,1509698170.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:10.391Z,1509698170.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:36:10.392Z,1509698170.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:10.719Z,1509698170.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:10.757Z,1509698170.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:36:10.758Z,1509698170.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:11.123Z,1509698171.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:11.195Z,1509698171.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:11.520Z,1509698171.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:11.562Z,1509698171.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:11.908Z,1509698171.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:11.995Z,1509698171.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:12.308Z,1509698172.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:12.412Z,1509698172.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:12.710Z,1509698172.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:12.753Z,1509698172.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:13.116Z,1509698173.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:13.131Z,1509698173.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:13.525Z,1509698173.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:13.556Z,1509698173.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:13.925Z,1509698173.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:13.957Z,1509698173.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:14.322Z,1509698174.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:14.357Z,1509698174.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:14.712Z,1509698174.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:14.727Z,1509698174.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:15.115Z,1509698175.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:15.135Z,1509698175.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:15.508Z,1509698175.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:15.523Z,1509698175.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:15.913Z,1509698175.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:15.929Z,1509698175.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:16.315Z,1509698176.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:16.335Z,1509698176.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:16.725Z,1509698176.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:16.756Z,1509698176.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:17.125Z,1509698177.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:17.155Z,1509698177.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:17.526Z,1509698177.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:17.557Z,1509698177.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:17.915Z,1509698177.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:17.931Z,1509698177.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:18.318Z,1509698178.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:18.333Z,1509698178.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:18.722Z,1509698178.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:18.769Z,1509698178.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:19.113Z,1509698179.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:19.128Z,1509698179.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:19.523Z,1509698179.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:19.561Z,1509698179.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:19.930Z,1509698179.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:19.959Z,1509698179.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:20.331Z,1509698180.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:20.358Z,1509698180.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:20.715Z,1509698180.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:20.735Z,1509698180.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:21.115Z,1509698181.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:21.131Z,1509698181.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:21.512Z,1509698181.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:21.531Z,1509698181.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:21.915Z,1509698181.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:21.931Z,1509698181.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:22.315Z,1509698182.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:22.330Z,1509698182.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:22.729Z,1509698182.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:22.759Z,1509698182.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:23.129Z,1509698183.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:23.159Z,1509698183.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:23.529Z,1509698183.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:23.560Z,1509698183.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:23.930Z,1509698183.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:23.961Z,1509698183.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:24.315Z,1509698184.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:24.378Z,1509698184.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:24.718Z,1509698184.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:24.828Z,1509698184.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:25.112Z,1509698185.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:25.127Z,1509698185.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:25.521Z,1509698185.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:25.567Z,1509698185.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:25.924Z,1509698185.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:25.942Z,1509698185.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:26.323Z,1509698186.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:26.374Z,1509698186.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:26.718Z,1509698186.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:26.739Z,1509698186.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:27.117Z,1509698187.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:27.163Z,1509698187.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:27.511Z,1509698187.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:27.526Z,1509698187.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:27.916Z,1509698187.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:27.931Z,1509698187.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:28.326Z,1509698188.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:28.340Z,1509698188.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:28.723Z,1509698188.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:28.743Z,1509698188.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:29.123Z,1509698189.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:29.143Z,1509698189.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:29.524Z,1509698189.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:29.542Z,1509698189.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:29.912Z,1509698189.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:29.927Z,1509698189.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:30.315Z,1509698190.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:30.331Z,1509698190.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:30.713Z,1509698190.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:30.727Z,1509698190.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:31.111Z,1509698191.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:31.129Z,1509698191.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:31.523Z,1509698191.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:31.543Z,1509698191.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:31.925Z,1509698191.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:31.939Z,1509698191.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:32.324Z,1509698192.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:32.339Z,1509698192.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:32.716Z,1509698192.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:32.731Z,1509698192.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:33.112Z,1509698193.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:33.130Z,1509698193.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:33.519Z,1509698193.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:33.534Z,1509698193.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:33.916Z,1509698193.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:33.931Z,1509698193.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:34.324Z,1509698194.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:34.346Z,1509698194.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:34.724Z,1509698194.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:34.739Z,1509698194.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:35.124Z,1509698195.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:35.139Z,1509698195.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:35.521Z,1509698195.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:35.535Z,1509698195.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:35.919Z,1509698195.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:35.939Z,1509698195.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:36.324Z,1509698196.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:36.347Z,1509698196.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:36.725Z,1509698196.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:36.746Z,1509698196.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:37.124Z,1509698197.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:37.147Z,1509698197.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:37.514Z,1509698197.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:37.529Z,1509698197.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:37.920Z,1509698197.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:37.934Z,1509698197.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:38.316Z,1509698198.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:38.331Z,1509698198.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:38.723Z,1509698198.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:38.789Z,1509698198.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:39.125Z,1509698199.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:39.183Z,1509698199.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:39.524Z,1509698199.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:39.539Z,1509698199.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:39.919Z,1509698199.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:39.971Z,1509698199.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:42.994Z,1509698202.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:43.018Z,1509698203.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:43.163Z,1509698203.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:43.223Z,1509698203.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:43.571Z,1509698203.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:43.623Z,1509698203.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:43.972Z,1509698203.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:43.994Z,1509698203.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:44.371Z,1509698204.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:44.387Z,1509698204.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:44.759Z,1509698204.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:44.775Z,1509698204.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:45.162Z,1509698205.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:45.177Z,1509698205.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:45.561Z,1509698205.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:45.576Z,1509698205.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:45.961Z,1509698205.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:45.977Z,1509698205.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:46.369Z,1509698206.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:46.384Z,1509698206.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:46.771Z,1509698206.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:46.791Z,1509698206.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:47.172Z,1509698207.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:47.187Z,1509698207.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:47.563Z,1509698207.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:47.578Z,1509698207.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:47.962Z,1509698207.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:47.983Z,1509698207.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:48.372Z,1509698208.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:48.387Z,1509698208.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:48.769Z,1509698208.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:48.784Z,1509698208.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:49.172Z,1509698209.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:49.191Z,1509698209.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:49.560Z,1509698209.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:49.575Z,1509698209.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:49.948Z,1509698209.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:49.973Z,1509698209.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:50.368Z,1509698210.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:50.391Z,1509698210.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:50.780Z,1509698210.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:50.795Z,1509698210.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:51.173Z,1509698211.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:51.188Z,1509698211.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:51.553Z,1509698211.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:51.583Z,1509698211.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:51.954Z,1509698211.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:51.987Z,1509698211.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:52.373Z,1509698212.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:52.388Z,1509698212.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:52.773Z,1509698212.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:52.788Z,1509698212.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:53.173Z,1509698213.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:53.188Z,1509698213.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:53.555Z,1509698213.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:53.581Z,1509698213.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:53.952Z,1509698213.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:53.978Z,1509698213.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:54.373Z,1509698214.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:54.388Z,1509698214.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:54.777Z,1509698214.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:54.792Z,1509698214.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:55.173Z,1509698215.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:55.188Z,1509698215.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:55.553Z,1509698215.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:55.650Z,1509698215.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:55.954Z,1509698215.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:55.980Z,1509698215.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:56.373Z,1509698216.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:56.388Z,1509698216.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:56.777Z,1509698216.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:56.834Z,1509698216.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:57.170Z,1509698217.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:57.190Z,1509698217.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:57.556Z,1509698217.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:57.611Z,1509698217.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:57.952Z,1509698217.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:58.006Z,1509698218.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:58.374Z,1509698218.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:58.388Z,1509698218.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:58.774Z,1509698218.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:58.795Z,1509698218.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:59.173Z,1509698219.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:59.188Z,1509698219.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:59.555Z,1509698219.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:59.581Z,1509698219.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:36:59.953Z,1509698219.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:36:59.981Z,1509698219.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:00.373Z,1509698220.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:00.388Z,1509698220.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:00.779Z,1509698220.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:00.793Z,1509698220.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:01.174Z,1509698221.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:01.189Z,1509698221.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:01.557Z,1509698221.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:01.583Z,1509698221.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:01.956Z,1509698221.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:01.983Z,1509698221.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:02.359Z,1509698222.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:02.390Z,1509698222.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:02.778Z,1509698222.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:02.793Z,1509698222.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:03.176Z,1509698223.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:03.191Z,1509698223.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:03.555Z,1509698223.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:03.583Z,1509698223.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:03.954Z,1509698223.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:03.981Z,1509698223.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:04.375Z,1509698224.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:04.391Z,1509698224.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:04.757Z,1509698224.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:04.790Z,1509698224.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:05.174Z,1509698225.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:05.190Z,1509698225.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:05.551Z,1509698225.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:05.582Z,1509698225.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:05.952Z,1509698225.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:05.983Z,1509698225.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:06.373Z,1509698226.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:06.388Z,1509698226.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:06.777Z,1509698226.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:06.795Z,1509698226.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:07.173Z,1509698227.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:07.188Z,1509698227.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:07.555Z,1509698227.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:07.581Z,1509698227.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:07.954Z,1509698227.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:07.983Z,1509698227.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:08.373Z,1509698228.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:08.389Z,1509698228.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:08.777Z,1509698228.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:08.792Z,1509698228.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:09.178Z,1509698229.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:09.201Z,1509698229.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:09.555Z,1509698229.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:09.581Z,1509698229.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:09.954Z,1509698229.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:10.007Z,1509698230.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:10.374Z,1509698230.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:10.414Z,1509698230.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:10.766Z,1509698230.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:10.792Z,1509698230.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:11.165Z,1509698231.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:11.234Z,1509698231.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:11.552Z,1509698231.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:11.566Z,1509698231.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:11.948Z,1509698231.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:12.005Z,1509698232.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:12.365Z,1509698232.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:12.437Z,1509698232.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:12.765Z,1509698232.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:12.793Z,1509698232.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:13.165Z,1509698233.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:13.191Z,1509698233.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:13.553Z,1509698233.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:13.568Z,1509698233.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:13.951Z,1509698233.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:13.966Z,1509698233.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:14.366Z,1509698234.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:14.389Z,1509698234.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:14.779Z,1509698234.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:14.794Z,1509698234.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:15.165Z,1509698235.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:15.191Z,1509698235.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:15.553Z,1509698235.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:15.568Z,1509698235.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:15.952Z,1509698235.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:15.971Z,1509698235.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:16.365Z,1509698236.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:16.391Z,1509698236.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:16.765Z,1509698236.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:16.790Z,1509698236.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:17.166Z,1509698237.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:17.190Z,1509698237.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:17.552Z,1509698237.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:17.566Z,1509698237.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:17.951Z,1509698237.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:17.971Z,1509698237.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:18.366Z,1509698238.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:18.395Z,1509698238.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:18.769Z,1509698238.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:18.793Z,1509698238.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:19.166Z,1509698239.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:19.190Z,1509698239.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:19.552Z,1509698239.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:19.568Z,1509698239.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:19.951Z,1509698239.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:19.966Z,1509698239.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:20.365Z,1509698240.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:20.395Z,1509698240.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:20.766Z,1509698240.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:20.795Z,1509698240.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:21.165Z,1509698241.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:21.191Z,1509698241.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:21.552Z,1509698241.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:21.567Z,1509698241.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:21.951Z,1509698241.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:21.967Z,1509698241.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:22.365Z,1509698242.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:22.391Z,1509698242.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:22.765Z,1509698242.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:22.789Z,1509698242.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:23.165Z,1509698243.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:23.189Z,1509698243.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:23.551Z,1509698243.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:23.566Z,1509698243.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:23.951Z,1509698243.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:24.014Z,1509698244.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:24.369Z,1509698244.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:24.422Z,1509698244.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:24.765Z,1509698244.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:24.780Z,1509698244.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:25.169Z,1509698245.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:25.215Z,1509698245.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:25.560Z,1509698245.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:25.575Z,1509698245.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:25.955Z,1509698245.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:26.003Z,1509698246.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:26.370Z,1509698246.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:26.418Z,1509698246.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:26.769Z,1509698246.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:26.799Z,1509698246.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:27.169Z,1509698247.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:27.198Z,1509698247.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:27.559Z,1509698247.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:27.575Z,1509698247.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:27.959Z,1509698247.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:27.975Z,1509698247.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:28.369Z,1509698248.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:28.398Z,1509698248.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:28.761Z,1509698248.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:28.777Z,1509698248.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:29.169Z,1509698249.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:29.199Z,1509698249.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:29.556Z,1509698249.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:29.571Z,1509698249.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:29.955Z,1509698249.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:29.970Z,1509698249.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:30.369Z,1509698250.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:30.399Z,1509698250.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:30.769Z,1509698250.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:30.798Z,1509698250.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:31.169Z,1509698251.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:31.199Z,1509698251.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:31.556Z,1509698251.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:31.571Z,1509698251.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:31.955Z,1509698251.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:31.969Z,1509698251.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:32.361Z,1509698252.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:32.377Z,1509698252.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:32.773Z,1509698252.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:32.810Z,1509698252.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:33.169Z,1509698253.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:33.198Z,1509698253.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:33.556Z,1509698253.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:33.571Z,1509698253.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:33.955Z,1509698253.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:33.971Z,1509698253.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:34.369Z,1509698254.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:34.399Z,1509698254.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:34.769Z,1509698254.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:34.797Z,1509698254.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:35.174Z,1509698255.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:35.195Z,1509698255.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:35.557Z,1509698255.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:35.571Z,1509698255.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:35.956Z,1509698255.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:35.979Z,1509698255.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:36.370Z,1509698256.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:36.399Z,1509698256.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:36.769Z,1509698256.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:36.799Z,1509698256.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:37.170Z,1509698257.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:37.198Z,1509698257.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:37.556Z,1509698257.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:37.571Z,1509698257.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:37.956Z,1509698257.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:37.970Z,1509698257.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:38.369Z,1509698258.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:38.398Z,1509698258.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:38.769Z,1509698258.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:38.847Z,1509698258.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:39.173Z,1509698259.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:39.207Z,1509698259.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:39.562Z,1509698259.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:39.623Z,1509698259.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:39.962Z,1509698259.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:39.977Z,1509698259.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:43.054Z,1509698263.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:43.099Z,1509698263.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:43.235Z,1509698263.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:43.292Z,1509698263.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:43.653Z,1509698263.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:43.668Z,1509698263.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:44.031Z,1509698264.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:44.056Z,1509698264.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:44.432Z,1509698264.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:44.459Z,1509698264.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:44.880Z,1509698264.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:44.979Z,1509698264.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:45.231Z,1509698265.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:45.262Z,1509698265.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:45.642Z,1509698265.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:45.673Z,1509698265.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:46.040Z,1509698266.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:46.071Z,1509698266.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:46.438Z,1509698266.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:46.470Z,1509698266.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:46.828Z,1509698266.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:46.867Z,1509698266.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:47.228Z,1509698267.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:47.243Z,1509698267.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:47.634Z,1509698267.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:47.673Z,1509698267.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:48.026Z,1509698268.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:48.042Z,1509698268.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:48.442Z,1509698268.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:48.475Z,1509698268.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:48.838Z,1509698268.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:48.871Z,1509698268.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:49.239Z,1509698269.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:49.275Z,1509698269.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:49.630Z,1509698269.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:49.645Z,1509698269.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:50.027Z,1509698270.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:50.041Z,1509698270.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:50.431Z,1509698270.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:50.447Z,1509698270.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:50.826Z,1509698270.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:50.871Z,1509698270.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:51.229Z,1509698271.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:51.236Z,1509698271.236 [PNI_TCM](ERROR): CRC does not match. Expected:0x21739 got:0x49598
2017-11-03T08:37:51.272Z,1509698271.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:51.646Z,1509698271.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:51.677Z,1509698271.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:52.044Z,1509698272.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:52.075Z,1509698272.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:52.447Z,1509698272.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:52.476Z,1509698272.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:52.837Z,1509698272.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:52.852Z,1509698272.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:53.234Z,1509698273.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:53.248Z,1509698273.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:53.632Z,1509698273.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:53.647Z,1509698273.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:54.029Z,1509698274.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:54.046Z,1509698274.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:54.438Z,1509698274.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:54.477Z,1509698274.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:54.849Z,1509698274.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:54.902Z,1509698274.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:55.241Z,1509698275.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:55.295Z,1509698275.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:55.627Z,1509698275.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:55.645Z,1509698275.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:56.029Z,1509698276.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:56.075Z,1509698276.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:56.435Z,1509698276.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:56.455Z,1509698276.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:56.831Z,1509698276.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:56.875Z,1509698276.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:57.231Z,1509698277.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:57.272Z,1509698277.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:57.649Z,1509698277.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:57.673Z,1509698277.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:58.053Z,1509698278.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:58.076Z,1509698278.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:58.441Z,1509698278.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:58.456Z,1509698278.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:58.833Z,1509698278.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:58.849Z,1509698278.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:59.237Z,1509698279.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:59.251Z,1509698279.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:37:59.632Z,1509698279.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:37:59.654Z,1509698279.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:00.032Z,1509698280.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:00.047Z,1509698280.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:00.443Z,1509698280.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:00.476Z,1509698280.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:00.841Z,1509698280.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:00.878Z,1509698280.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:01.242Z,1509698281.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:01.269Z,1509698281.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:01.631Z,1509698281.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:01.646Z,1509698281.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:02.037Z,1509698282.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:02.051Z,1509698282.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:02.430Z,1509698282.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:02.451Z,1509698282.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:02.835Z,1509698282.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:02.850Z,1509698282.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:03.231Z,1509698283.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:03.246Z,1509698283.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:03.643Z,1509698283.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:03.675Z,1509698283.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:04.049Z,1509698284.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:04.078Z,1509698284.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:04.445Z,1509698284.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:04.477Z,1509698284.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:04.835Z,1509698284.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:04.850Z,1509698284.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:05.233Z,1509698285.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:05.249Z,1509698285.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:05.634Z,1509698285.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:05.654Z,1509698285.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:06.035Z,1509698286.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:06.055Z,1509698286.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:06.446Z,1509698286.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:06.475Z,1509698286.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:06.847Z,1509698286.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:06.876Z,1509698286.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:07.250Z,1509698287.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:07.274Z,1509698287.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:07.634Z,1509698287.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:07.649Z,1509698287.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:08.032Z,1509698288.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:08.051Z,1509698288.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:08.437Z,1509698288.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:08.452Z,1509698288.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:08.833Z,1509698288.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:08.847Z,1509698288.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:09.235Z,1509698289.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:09.300Z,1509698289.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:09.642Z,1509698289.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:09.697Z,1509698289.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:10.050Z,1509698290.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:10.079Z,1509698290.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:10.446Z,1509698290.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:10.483Z,1509698290.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:10.829Z,1509698290.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:10.844Z,1509698290.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:11.233Z,1509698291.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:11.279Z,1509698291.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:11.638Z,1509698291.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:11.695Z,1509698291.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:12.038Z,1509698292.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:12.053Z,1509698292.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:12.449Z,1509698292.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:12.478Z,1509698292.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:12.841Z,1509698292.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:12.856Z,1509698292.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:13.250Z,1509698293.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:13.278Z,1509698293.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:13.637Z,1509698293.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:13.658Z,1509698293.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:14.037Z,1509698294.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:14.053Z,1509698294.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:14.431Z,1509698294.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:14.446Z,1509698294.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:14.837Z,1509698294.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:14.852Z,1509698294.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:15.238Z,1509698295.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:15.253Z,1509698295.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:15.638Z,1509698295.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:15.653Z,1509698295.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:16.041Z,1509698296.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:16.055Z,1509698296.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:16.450Z,1509698296.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:16.478Z,1509698296.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:16.831Z,1509698296.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:16.850Z,1509698296.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:17.236Z,1509698297.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:17.251Z,1509698297.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:17.636Z,1509698297.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:17.651Z,1509698297.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:18.037Z,1509698298.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:18.052Z,1509698298.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:18.449Z,1509698298.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:18.477Z,1509698298.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:18.849Z,1509698298.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:18.878Z,1509698298.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:19.242Z,1509698299.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:19.257Z,1509698299.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:19.639Z,1509698299.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:19.654Z,1509698299.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:20.040Z,1509698300.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:20.055Z,1509698300.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:20.438Z,1509698300.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:20.453Z,1509698300.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:20.834Z,1509698300.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:20.848Z,1509698300.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:21.238Z,1509698301.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:21.253Z,1509698301.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:21.649Z,1509698301.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:21.679Z,1509698301.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:22.049Z,1509698302.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:22.076Z,1509698302.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:22.438Z,1509698302.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:22.453Z,1509698302.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:22.838Z,1509698302.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:22.859Z,1509698302.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:23.241Z,1509698303.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:23.279Z,1509698303.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:23.639Z,1509698303.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:23.710Z,1509698303.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:24.038Z,1509698304.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:24.053Z,1509698304.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:24.447Z,1509698304.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:24.462Z,1509698304.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:24.844Z,1509698304.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:24.898Z,1509698304.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:25.243Z,1509698305.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:25.258Z,1509698305.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:25.636Z,1509698305.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:25.680Z,1509698305.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:26.041Z,1509698306.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:26.090Z,1509698306.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:26.438Z,1509698306.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:26.454Z,1509698306.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:26.838Z,1509698306.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:26.854Z,1509698306.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:27.236Z,1509698307.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:27.251Z,1509698307.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:27.643Z,1509698307.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:27.660Z,1509698307.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:28.042Z,1509698308.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:28.064Z,1509698308.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:28.440Z,1509698308.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:28.458Z,1509698308.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:28.836Z,1509698308.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:28.859Z,1509698308.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:29.237Z,1509698309.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:29.252Z,1509698309.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:29.642Z,1509698309.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:29.657Z,1509698309.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:30.037Z,1509698310.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:30.052Z,1509698310.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:30.441Z,1509698310.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:30.462Z,1509698310.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:30.842Z,1509698310.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:30.856Z,1509698310.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:31.242Z,1509698311.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:31.257Z,1509698311.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:31.636Z,1509698311.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:31.651Z,1509698311.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:32.036Z,1509698312.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:32.050Z,1509698312.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:32.438Z,1509698312.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:32.453Z,1509698312.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:32.839Z,1509698312.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:32.854Z,1509698312.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:33.239Z,1509698313.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:33.258Z,1509698313.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:33.642Z,1509698313.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:33.657Z,1509698313.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:34.043Z,1509698314.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:34.062Z,1509698314.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:34.443Z,1509698314.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:34.458Z,1509698314.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:34.837Z,1509698314.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:34.859Z,1509698314.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:35.236Z,1509698315.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:35.259Z,1509698315.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:35.640Z,1509698315.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:35.662Z,1509698315.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:36.039Z,1509698316.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:36.059Z,1509698316.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:36.442Z,1509698316.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:36.457Z,1509698316.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:36.841Z,1509698316.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:36.855Z,1509698316.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:37.243Z,1509698317.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:37.263Z,1509698317.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:37.641Z,1509698317.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:37.656Z,1509698317.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:38.039Z,1509698318.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:38.129Z,1509698318.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:38.435Z,1509698318.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:38.455Z,1509698318.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:38.842Z,1509698318.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:38.857Z,1509698318.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:39.240Z,1509698319.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:39.287Z,1509698319.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:39.644Z,1509698319.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:39.659Z,1509698319.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:40.045Z,1509698320.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:40.098Z,1509698320.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:43.131Z,1509698323.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:43.187Z,1509698323.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:43.334Z,1509698323.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:43.362Z,1509698323.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:43.734Z,1509698323.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:43.752Z,1509698323.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:44.127Z,1509698324.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:44.154Z,1509698324.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:44.507Z,1509698324.507 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T08:38:44.507Z,1509698324.507 [NAL9602] Data Fault, FailCount= 1
2017-11-03T08:38:44.507Z,1509698324.507 [NAL9602](ERROR): Data Fault
2017-11-03T08:38:44.525Z,1509698324.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:44.540Z,1509698324.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:44.642Z,1509698324.642 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T08:38:44.907Z,1509698324.907 [NAL9602](INFO): Powering down
2017-11-03T08:38:44.926Z,1509698324.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:44.941Z,1509698324.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:45.323Z,1509698325.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:45.337Z,1509698325.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:45.731Z,1509698325.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:45.746Z,1509698325.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:45.841Z,1509698325.841 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T08:38:45.841Z,1509698325.841 [NAL9602] No Fault, FailCount= 1
2017-11-03T08:38:46.130Z,1509698326.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:46.145Z,1509698326.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:46.523Z,1509698326.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:46.537Z,1509698326.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:46.924Z,1509698326.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:46.939Z,1509698326.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:47.323Z,1509698327.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:47.338Z,1509698327.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:47.724Z,1509698327.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:47.738Z,1509698327.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:48.124Z,1509698328.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:48.139Z,1509698328.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:48.531Z,1509698328.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:48.545Z,1509698328.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:48.923Z,1509698328.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:48.938Z,1509698328.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:49.324Z,1509698329.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:49.339Z,1509698329.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:49.723Z,1509698329.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:49.738Z,1509698329.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:50.123Z,1509698330.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:50.138Z,1509698330.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:50.525Z,1509698330.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:50.540Z,1509698330.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:50.924Z,1509698330.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:50.939Z,1509698330.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:51.324Z,1509698331.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:51.338Z,1509698331.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:51.724Z,1509698331.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:51.739Z,1509698331.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:52.123Z,1509698332.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:52.138Z,1509698332.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:52.138Z,1509698332.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 168
2017-11-03T08:38:52.138Z,1509698332.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:38:52.140Z,1509698332.140 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:52.140Z,1509698332.140 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 168
2017-11-03T08:38:52.140Z,1509698332.140 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:38:52.142Z,1509698332.142 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:52.142Z,1509698332.142 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 168
2017-11-03T08:38:52.142Z,1509698332.142 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:38:52.248Z,1509698332.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:38:52.248Z,1509698332.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:38:52.249Z,1509698332.249 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:38:52.527Z,1509698332.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:52.620Z,1509698332.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:38:52.621Z,1509698332.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 168
2017-11-03T08:38:52.621Z,1509698332.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:38:52.621Z,1509698332.621 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 168
2017-11-03T08:38:52.622Z,1509698332.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:38:52.622Z,1509698332.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 168
2017-11-03T08:38:52.931Z,1509698332.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:52.946Z,1509698332.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:38:52.946Z,1509698332.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:38:52.946Z,1509698332.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:38:52.947Z,1509698332.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:38:52.947Z,1509698332.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:38:52.947Z,1509698332.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:38:52.948Z,1509698332.948 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:38:52.948Z,1509698332.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:38:52.949Z,1509698332.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:38:53.331Z,1509698333.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:53.346Z,1509698333.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:38:53.347Z,1509698333.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:53.731Z,1509698333.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:53.745Z,1509698333.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:38:53.746Z,1509698333.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:54.132Z,1509698334.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:54.147Z,1509698334.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:38:54.148Z,1509698334.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:54.530Z,1509698334.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:54.545Z,1509698334.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:38:54.546Z,1509698334.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:54.931Z,1509698334.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:54.998Z,1509698334.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-03T08:38:54.999Z,1509698334.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:55.330Z,1509698335.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:55.385Z,1509698335.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:38:55.386Z,1509698335.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:55.727Z,1509698335.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:55.742Z,1509698335.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:38:55.743Z,1509698335.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:56.133Z,1509698336.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:56.180Z,1509698336.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:38:56.181Z,1509698336.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:56.532Z,1509698336.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:56.547Z,1509698336.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:38:56.548Z,1509698336.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:56.933Z,1509698336.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:56.980Z,1509698336.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:38:56.981Z,1509698336.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:57.333Z,1509698337.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:57.380Z,1509698337.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:38:57.381Z,1509698337.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:57.732Z,1509698337.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:57.747Z,1509698337.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:38:57.748Z,1509698337.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:58.133Z,1509698338.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:58.147Z,1509698338.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:38:58.148Z,1509698338.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:58.533Z,1509698338.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:58.548Z,1509698338.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:38:58.549Z,1509698338.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:58.932Z,1509698338.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:58.947Z,1509698338.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:38:58.948Z,1509698338.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:59.333Z,1509698339.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:59.347Z,1509698339.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:38:59.348Z,1509698339.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:38:59.733Z,1509698339.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:38:59.747Z,1509698339.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:38:59.748Z,1509698339.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:00.134Z,1509698340.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:00.149Z,1509698340.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:39:00.150Z,1509698340.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:00.533Z,1509698340.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:00.547Z,1509698340.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:39:00.548Z,1509698340.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:00.925Z,1509698340.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:00.939Z,1509698340.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T08:39:00.939Z,1509698340.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:01.334Z,1509698341.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:01.349Z,1509698341.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:39:01.350Z,1509698341.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:01.728Z,1509698341.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:01.742Z,1509698341.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:39:01.743Z,1509698341.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:02.134Z,1509698342.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:02.148Z,1509698342.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:39:02.149Z,1509698342.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:02.534Z,1509698342.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:02.549Z,1509698342.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:39:02.550Z,1509698342.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:02.933Z,1509698342.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:02.947Z,1509698342.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:39:02.949Z,1509698342.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:03.328Z,1509698343.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:03.342Z,1509698343.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:39:03.343Z,1509698343.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:03.734Z,1509698343.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:03.749Z,1509698343.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:39:03.750Z,1509698343.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:04.128Z,1509698344.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:04.150Z,1509698344.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:39:04.151Z,1509698344.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:04.534Z,1509698344.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:04.548Z,1509698344.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:39:04.549Z,1509698344.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:04.934Z,1509698344.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:04.949Z,1509698344.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:39:04.950Z,1509698344.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:05.334Z,1509698345.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:05.348Z,1509698345.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:39:05.349Z,1509698345.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:05.732Z,1509698345.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:05.746Z,1509698345.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:39:05.747Z,1509698345.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:06.133Z,1509698346.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:06.147Z,1509698346.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:39:06.148Z,1509698346.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:06.528Z,1509698346.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:06.542Z,1509698346.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:39:06.543Z,1509698346.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:06.932Z,1509698346.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:06.946Z,1509698346.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:39:06.947Z,1509698346.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:07.326Z,1509698347.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:07.348Z,1509698347.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:39:07.349Z,1509698347.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:07.734Z,1509698347.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:07.749Z,1509698347.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:39:07.750Z,1509698347.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:08.136Z,1509698348.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:08.150Z,1509698348.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:39:08.151Z,1509698348.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:08.535Z,1509698348.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:08.550Z,1509698348.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:39:08.551Z,1509698348.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:08.936Z,1509698348.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:08.950Z,1509698348.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:39:08.951Z,1509698348.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:09.336Z,1509698349.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:09.425Z,1509698349.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T08:39:09.426Z,1509698349.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:09.729Z,1509698349.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:09.744Z,1509698349.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:39:09.745Z,1509698349.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:10.135Z,1509698350.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:10.183Z,1509698350.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:39:10.184Z,1509698350.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:10.533Z,1509698350.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:10.547Z,1509698350.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:39:10.548Z,1509698350.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:10.936Z,1509698350.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:10.993Z,1509698350.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T08:39:10.994Z,1509698350.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:11.334Z,1509698351.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:11.383Z,1509698351.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:39:11.384Z,1509698351.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:11.737Z,1509698351.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:11.752Z,1509698351.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:39:11.753Z,1509698351.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:12.136Z,1509698352.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:12.152Z,1509698352.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:12.535Z,1509698352.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:12.549Z,1509698352.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:12.934Z,1509698352.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:12.950Z,1509698352.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:13.335Z,1509698353.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:13.350Z,1509698353.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:13.734Z,1509698353.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:13.750Z,1509698353.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:14.134Z,1509698354.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:14.150Z,1509698354.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:14.534Z,1509698354.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:14.550Z,1509698354.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:14.932Z,1509698354.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:14.946Z,1509698354.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:15.310Z,1509698355.310 [NAL9602](INFO): Powering up NAL9602
2017-11-03T08:39:15.340Z,1509698355.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:15.355Z,1509698355.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:15.734Z,1509698355.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:15.750Z,1509698355.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:16.130Z,1509698356.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:16.153Z,1509698356.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:16.534Z,1509698356.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:16.549Z,1509698356.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:16.934Z,1509698356.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:16.949Z,1509698356.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:17.332Z,1509698357.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:17.346Z,1509698357.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:17.734Z,1509698357.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:17.749Z,1509698357.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:18.134Z,1509698358.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:18.149Z,1509698358.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:18.532Z,1509698358.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:18.547Z,1509698358.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:18.934Z,1509698358.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:18.949Z,1509698358.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:19.334Z,1509698359.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:19.349Z,1509698359.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:19.731Z,1509698359.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:19.747Z,1509698359.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:20.126Z,1509698360.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:20.163Z,1509698360.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:20.520Z,1509698360.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:20.535Z,1509698360.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:20.927Z,1509698360.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:20.957Z,1509698360.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:21.320Z,1509698361.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:21.335Z,1509698361.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:21.727Z,1509698361.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:21.757Z,1509698361.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:22.124Z,1509698362.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:22.159Z,1509698362.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:22.520Z,1509698362.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:22.535Z,1509698362.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:22.927Z,1509698362.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:22.958Z,1509698362.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:23.324Z,1509698363.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:23.415Z,1509698363.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:23.724Z,1509698363.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:23.739Z,1509698363.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:24.127Z,1509698364.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:24.187Z,1509698364.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:24.524Z,1509698364.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:24.538Z,1509698364.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:24.924Z,1509698364.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:24.965Z,1509698364.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:25.327Z,1509698365.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:25.387Z,1509698365.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:25.727Z,1509698365.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:25.763Z,1509698365.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:26.137Z,1509698366.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:26.164Z,1509698366.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:26.506Z,1509698366.506 [NAL9602](INFO): NAL9602 initialized
2017-11-03T08:39:26.523Z,1509698366.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:26.543Z,1509698366.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:26.927Z,1509698366.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:26.947Z,1509698366.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:27.341Z,1509698367.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:27.356Z,1509698367.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:27.741Z,1509698367.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:27.756Z,1509698367.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:28.141Z,1509698368.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:28.172Z,1509698368.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:28.528Z,1509698368.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:28.542Z,1509698368.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:28.928Z,1509698368.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:28.951Z,1509698368.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:29.329Z,1509698369.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:29.351Z,1509698369.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:29.728Z,1509698369.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:29.742Z,1509698369.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:30.142Z,1509698370.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:30.173Z,1509698370.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:30.541Z,1509698370.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:30.576Z,1509698370.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:30.941Z,1509698370.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:30.956Z,1509698370.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:31.329Z,1509698371.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:31.343Z,1509698371.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:31.728Z,1509698371.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:31.743Z,1509698371.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:32.129Z,1509698372.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:32.143Z,1509698372.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:32.529Z,1509698372.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:32.544Z,1509698372.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:32.942Z,1509698372.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:32.974Z,1509698372.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:33.345Z,1509698373.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:33.386Z,1509698373.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:33.746Z,1509698373.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:33.781Z,1509698373.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:34.131Z,1509698374.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:34.147Z,1509698374.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:34.532Z,1509698374.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:34.546Z,1509698374.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:34.932Z,1509698374.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:34.947Z,1509698374.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:35.332Z,1509698375.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:35.347Z,1509698375.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:35.732Z,1509698375.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:35.751Z,1509698375.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:36.146Z,1509698376.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:36.181Z,1509698376.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:36.537Z,1509698376.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:36.553Z,1509698376.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:36.945Z,1509698376.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:36.987Z,1509698376.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:37.327Z,1509698377.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:37.398Z,1509698377.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:37.732Z,1509698377.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:37.747Z,1509698377.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:38.135Z,1509698378.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:38.179Z,1509698378.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:38.535Z,1509698378.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:38.550Z,1509698378.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:38.937Z,1509698378.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:38.987Z,1509698378.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:39.341Z,1509698379.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:39.381Z,1509698379.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:39.738Z,1509698379.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:39.753Z,1509698379.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:40.135Z,1509698380.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:40.150Z,1509698380.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:43.208Z,1509698383.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:43.235Z,1509698383.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:43.364Z,1509698383.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:43.394Z,1509698383.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:43.785Z,1509698383.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:43.800Z,1509698383.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:44.186Z,1509698384.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:44.200Z,1509698384.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:44.581Z,1509698384.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:44.596Z,1509698384.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:44.974Z,1509698384.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:44.995Z,1509698384.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:45.375Z,1509698385.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:45.390Z,1509698385.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:45.761Z,1509698385.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:45.793Z,1509698385.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:46.186Z,1509698386.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:46.201Z,1509698386.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:46.589Z,1509698386.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:46.604Z,1509698386.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:46.985Z,1509698386.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:47.001Z,1509698387.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:47.364Z,1509698387.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:47.395Z,1509698387.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:47.767Z,1509698387.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:47.793Z,1509698387.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:48.167Z,1509698388.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:48.193Z,1509698388.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:48.566Z,1509698388.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:48.592Z,1509698388.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:48.985Z,1509698388.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:48.000Z,1509698389.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:49.389Z,1509698389.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:49.404Z,1509698389.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:49.786Z,1509698389.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:49.801Z,1509698389.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:50.167Z,1509698390.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:50.193Z,1509698390.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:50.567Z,1509698390.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:50.594Z,1509698390.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:50.967Z,1509698390.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:50.999Z,1509698390.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:51.367Z,1509698391.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:51.413Z,1509698391.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:51.764Z,1509698391.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:51.819Z,1509698391.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:52.186Z,1509698392.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:52.201Z,1509698392.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:52.586Z,1509698392.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:52.640Z,1509698392.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:52.987Z,1509698392.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:53.007Z,1509698393.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:53.368Z,1509698393.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:53.438Z,1509698393.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:53.767Z,1509698393.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:53.819Z,1509698393.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:54.163Z,1509698394.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:54.190Z,1509698394.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:54.560Z,1509698394.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:54.588Z,1509698394.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:54.979Z,1509698394.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:55.005Z,1509698395.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:55.392Z,1509698395.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:55.414Z,1509698395.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:55.779Z,1509698395.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:55.805Z,1509698395.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:56.166Z,1509698396.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:56.205Z,1509698396.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:56.560Z,1509698396.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:56.575Z,1509698396.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:56.966Z,1509698396.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:57.004Z,1509698397.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:57.365Z,1509698397.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:57.379Z,1509698397.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:57.764Z,1509698397.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:57.779Z,1509698397.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:58.177Z,1509698398.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:58.203Z,1509698398.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:58.573Z,1509698398.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:58.607Z,1509698398.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:58.977Z,1509698398.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:59.003Z,1509698399.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:59.364Z,1509698399.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:59.378Z,1509698399.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:39:59.760Z,1509698399.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:39:59.775Z,1509698399.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:00.161Z,1509698400.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:00.176Z,1509698400.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:00.564Z,1509698400.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:00.578Z,1509698400.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:00.977Z,1509698400.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:00.998Z,1509698400.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:01.381Z,1509698401.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:01.405Z,1509698401.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:01.777Z,1509698401.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:01.807Z,1509698401.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:02.164Z,1509698402.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:02.183Z,1509698402.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:02.571Z,1509698402.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:02.587Z,1509698402.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:02.963Z,1509698402.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:02.978Z,1509698402.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:03.364Z,1509698403.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:03.379Z,1509698403.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:03.770Z,1509698403.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:03.787Z,1509698403.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:04.177Z,1509698404.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:04.208Z,1509698404.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:04.585Z,1509698404.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:04.612Z,1509698404.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:04.982Z,1509698404.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:05.013Z,1509698405.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:05.367Z,1509698405.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:05.382Z,1509698405.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:05.768Z,1509698405.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:05.833Z,1509698405.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:06.168Z,1509698406.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:06.238Z,1509698406.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:06.573Z,1509698406.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:06.588Z,1509698406.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:06.976Z,1509698406.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:06.991Z,1509698406.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:07.375Z,1509698407.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:07.423Z,1509698407.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:07.777Z,1509698407.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:07.798Z,1509698407.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:08.169Z,1509698408.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:08.215Z,1509698408.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:08.568Z,1509698408.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:08.626Z,1509698408.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:08.971Z,1509698408.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:08.986Z,1509698408.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:09.372Z,1509698409.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:09.387Z,1509698409.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:09.775Z,1509698409.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:09.795Z,1509698409.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:10.177Z,1509698410.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:10.198Z,1509698410.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:10.582Z,1509698410.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:10.596Z,1509698410.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:10.978Z,1509698410.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:10.993Z,1509698410.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:11.373Z,1509698411.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:11.388Z,1509698411.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:11.773Z,1509698411.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:11.788Z,1509698411.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:12.175Z,1509698412.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:12.191Z,1509698412.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:12.571Z,1509698412.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:12.585Z,1509698412.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:12.976Z,1509698412.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:12.991Z,1509698412.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:13.381Z,1509698413.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:13.397Z,1509698413.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:13.778Z,1509698413.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:13.793Z,1509698413.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:14.173Z,1509698414.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:14.194Z,1509698414.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:14.568Z,1509698414.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:14.584Z,1509698414.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:14.973Z,1509698414.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:14.988Z,1509698414.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:15.372Z,1509698415.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:15.387Z,1509698415.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:15.768Z,1509698415.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:15.784Z,1509698415.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:16.177Z,1509698416.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:16.193Z,1509698416.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:16.577Z,1509698416.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:16.595Z,1509698416.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:16.978Z,1509698416.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:16.994Z,1509698416.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:17.374Z,1509698417.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:17.389Z,1509698417.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:17.772Z,1509698417.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:17.793Z,1509698417.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:18.174Z,1509698418.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:18.190Z,1509698418.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:18.574Z,1509698418.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:18.588Z,1509698418.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:18.978Z,1509698418.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:18.999Z,1509698418.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:19.382Z,1509698419.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:19.397Z,1509698419.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:19.777Z,1509698419.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:19.792Z,1509698419.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:20.173Z,1509698420.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:20.195Z,1509698420.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:20.574Z,1509698420.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:20.590Z,1509698420.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:20.973Z,1509698420.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:21.075Z,1509698421.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:21.375Z,1509698421.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:21.391Z,1509698421.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:21.774Z,1509698421.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:21.823Z,1509698421.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:22.177Z,1509698422.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:22.192Z,1509698422.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:22.577Z,1509698422.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:22.623Z,1509698422.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:22.976Z,1509698422.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:23.026Z,1509698423.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:23.374Z,1509698423.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:23.388Z,1509698423.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:23.772Z,1509698423.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:23.788Z,1509698423.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:24.174Z,1509698424.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:24.190Z,1509698424.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:24.573Z,1509698424.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:24.588Z,1509698424.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:24.977Z,1509698424.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:24.999Z,1509698424.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:25.376Z,1509698425.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:25.391Z,1509698425.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:25.775Z,1509698425.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:25.790Z,1509698425.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:26.175Z,1509698426.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:26.190Z,1509698426.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:26.574Z,1509698426.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:26.589Z,1509698426.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:26.973Z,1509698426.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:26.988Z,1509698426.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:27.373Z,1509698427.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:27.394Z,1509698427.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:27.774Z,1509698427.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:27.790Z,1509698427.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:28.177Z,1509698428.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:28.192Z,1509698428.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:28.577Z,1509698428.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:28.599Z,1509698428.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:28.978Z,1509698428.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:28.993Z,1509698428.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:29.375Z,1509698429.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:29.389Z,1509698429.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:29.774Z,1509698429.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:29.789Z,1509698429.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:30.175Z,1509698430.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:30.195Z,1509698430.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:30.575Z,1509698430.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:30.589Z,1509698430.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:30.977Z,1509698430.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:30.993Z,1509698430.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:31.376Z,1509698431.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:31.392Z,1509698431.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:31.777Z,1509698431.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:31.798Z,1509698431.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:32.176Z,1509698432.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:32.192Z,1509698432.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:32.573Z,1509698432.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:32.589Z,1509698432.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:32.974Z,1509698432.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:32.989Z,1509698432.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:33.376Z,1509698433.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:33.391Z,1509698433.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:33.774Z,1509698433.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:33.824Z,1509698433.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:34.179Z,1509698434.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:34.194Z,1509698434.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:34.583Z,1509698434.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:34.603Z,1509698434.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:34.979Z,1509698434.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:35.058Z,1509698435.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:35.364Z,1509698435.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:35.391Z,1509698435.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:35.763Z,1509698435.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:35.830Z,1509698435.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:36.174Z,1509698436.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:36.190Z,1509698436.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:36.564Z,1509698436.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:36.627Z,1509698436.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:36.986Z,1509698436.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:37.035Z,1509698437.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:37.385Z,1509698437.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:37.401Z,1509698437.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:37.785Z,1509698437.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:37.803Z,1509698437.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:38.176Z,1509698438.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:38.190Z,1509698438.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:38.573Z,1509698438.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:38.590Z,1509698438.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:38.973Z,1509698438.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:38.988Z,1509698438.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:39.376Z,1509698439.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:39.390Z,1509698439.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:39.773Z,1509698439.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:39.789Z,1509698439.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:39.793Z,1509698439.793 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T08:40:39.793Z,1509698439.793 [Default:CheckIn:C.Wait] Stopped
2017-11-03T08:40:39.793Z,1509698439.793 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T08:40:39.793Z,1509698439.793 [Default:CheckIn:D] Running Loop=1
2017-11-03T08:40:40.185Z,1509698440.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:40.206Z,1509698440.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:40.210Z,1509698440.210 [Default:CheckIn:D] Stopped
2017-11-03T08:40:40.210Z,1509698440.210 [Default:CheckIn:E] Running Loop=1
2017-11-03T08:40:43.271Z,1509698443.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:43.286Z,1509698443.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:43.290Z,1509698443.290 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 505.544043 min 
2017-11-03T08:40:43.290Z,1509698443.290 [Default:CheckIn:E] Stopped
2017-11-03T08:40:43.290Z,1509698443.290 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T08:40:43.290Z,1509698443.290 [Default:CheckIn] Stopped
2017-11-03T08:40:43.291Z,1509698443.291 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T08:40:43.291Z,1509698443.291 [Default:CheckIn](INFO): Running loop #50
2017-11-03T08:40:43.291Z,1509698443.291 [Default:CheckIn] Running Loop=50
2017-11-03T08:40:43.291Z,1509698443.291 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T08:40:43.291Z,1509698443.291 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T08:40:43.462Z,1509698443.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:43.495Z,1509698443.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:43.844Z,1509698443.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:43.859Z,1509698443.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:44.244Z,1509698444.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:44.266Z,1509698444.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:44.643Z,1509698444.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:44.659Z,1509698444.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:45.057Z,1509698445.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:45.094Z,1509698445.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:45.457Z,1509698445.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:45.491Z,1509698445.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:45.858Z,1509698445.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:45.889Z,1509698445.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:46.247Z,1509698446.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:46.262Z,1509698446.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:46.647Z,1509698446.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:46.662Z,1509698446.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:47.047Z,1509698447.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:47.067Z,1509698447.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:47.447Z,1509698447.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:47.462Z,1509698447.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:47.847Z,1509698447.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:47.862Z,1509698447.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:48.253Z,1509698448.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:48.269Z,1509698448.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:48.653Z,1509698448.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:48.690Z,1509698448.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:49.061Z,1509698449.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:49.166Z,1509698449.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:49.447Z,1509698449.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:49.462Z,1509698449.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:49.847Z,1509698449.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:49.863Z,1509698449.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:50.245Z,1509698450.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:50.287Z,1509698450.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:50.647Z,1509698450.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:50.662Z,1509698450.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:51.054Z,1509698451.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:51.106Z,1509698451.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:51.449Z,1509698451.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:51.488Z,1509698451.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:51.861Z,1509698451.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:51.891Z,1509698451.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:52.247Z,1509698452.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:52.262Z,1509698452.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:52.647Z,1509698452.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:52.662Z,1509698452.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:53.048Z,1509698453.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:53.063Z,1509698453.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:53.447Z,1509698453.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:53.462Z,1509698453.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:53.847Z,1509698453.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:53.861Z,1509698453.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:54.253Z,1509698454.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:54.269Z,1509698454.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:54.661Z,1509698454.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:54.689Z,1509698454.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:55.049Z,1509698455.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:55.064Z,1509698455.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:55.449Z,1509698455.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:55.464Z,1509698455.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:55.847Z,1509698455.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:55.862Z,1509698455.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:56.248Z,1509698456.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:56.263Z,1509698456.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:56.648Z,1509698456.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:56.663Z,1509698456.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:57.054Z,1509698457.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:57.090Z,1509698457.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:57.453Z,1509698457.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:57.468Z,1509698457.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:57.852Z,1509698457.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:57.897Z,1509698457.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:58.250Z,1509698458.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:58.285Z,1509698458.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:58.653Z,1509698458.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:58.718Z,1509698458.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:59.047Z,1509698459.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:59.071Z,1509698459.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:59.455Z,1509698459.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:59.511Z,1509698459.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:40:59.849Z,1509698459.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:40:59.906Z,1509698459.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:00.253Z,1509698460.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:00.279Z,1509698460.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:00.676Z,1509698460.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:00.708Z,1509698460.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:01.056Z,1509698461.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:01.071Z,1509698461.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:01.470Z,1509698461.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:01.502Z,1509698461.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:01.870Z,1509698461.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:01.893Z,1509698461.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:02.241Z,1509698462.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:02.280Z,1509698462.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:02.640Z,1509698462.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:02.671Z,1509698462.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:03.060Z,1509698463.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:03.088Z,1509698463.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:03.463Z,1509698463.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:03.567Z,1509698463.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:03.859Z,1509698463.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:03.887Z,1509698463.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:04.249Z,1509698464.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:04.273Z,1509698464.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:04.640Z,1509698464.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:04.713Z,1509698464.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:05.050Z,1509698465.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:05.104Z,1509698465.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:05.449Z,1509698465.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:05.527Z,1509698465.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:05.840Z,1509698465.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:05.890Z,1509698465.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:06.286Z,1509698466.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:06.351Z,1509698466.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:06.663Z,1509698466.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:06.691Z,1509698466.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:07.051Z,1509698467.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:07.126Z,1509698467.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:07.439Z,1509698467.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:07.471Z,1509698467.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:07.845Z,1509698467.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:07.876Z,1509698467.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:08.241Z,1509698468.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:08.269Z,1509698468.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:08.640Z,1509698468.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:08.683Z,1509698468.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:09.059Z,1509698469.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:09.083Z,1509698469.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:09.463Z,1509698469.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:09.511Z,1509698469.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:09.859Z,1509698469.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:09.887Z,1509698469.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:10.240Z,1509698470.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:10.279Z,1509698470.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:10.640Z,1509698470.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:10.687Z,1509698470.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:11.040Z,1509698471.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:11.085Z,1509698471.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:11.441Z,1509698471.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:11.481Z,1509698471.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:11.840Z,1509698471.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:11.895Z,1509698471.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:12.251Z,1509698472.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:12.294Z,1509698472.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:12.655Z,1509698472.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:12.689Z,1509698472.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:13.051Z,1509698473.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:13.118Z,1509698473.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:13.441Z,1509698473.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:13.480Z,1509698473.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:13.849Z,1509698473.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:13.903Z,1509698473.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:14.249Z,1509698474.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:14.272Z,1509698474.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:14.648Z,1509698474.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:14.663Z,1509698474.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:15.053Z,1509698475.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:15.069Z,1509698475.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:15.461Z,1509698475.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:15.475Z,1509698475.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:15.854Z,1509698475.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:15.869Z,1509698475.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:16.248Z,1509698476.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:16.263Z,1509698476.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:16.650Z,1509698476.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:16.664Z,1509698476.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:17.050Z,1509698477.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:17.065Z,1509698477.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:17.448Z,1509698477.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:17.467Z,1509698477.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:17.854Z,1509698477.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:17.958Z,1509698477.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:18.257Z,1509698478.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:18.318Z,1509698478.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:18.656Z,1509698478.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:18.671Z,1509698478.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:19.059Z,1509698479.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:19.073Z,1509698479.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:19.451Z,1509698479.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:19.506Z,1509698479.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:19.846Z,1509698479.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:19.862Z,1509698479.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:20.245Z,1509698480.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:20.283Z,1509698480.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:20.644Z,1509698480.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:20.660Z,1509698480.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:21.055Z,1509698481.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:21.106Z,1509698481.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:21.454Z,1509698481.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:21.471Z,1509698481.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:21.855Z,1509698481.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:21.871Z,1509698481.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:22.247Z,1509698482.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:22.281Z,1509698482.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:22.650Z,1509698482.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:22.665Z,1509698482.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:23.043Z,1509698483.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:23.062Z,1509698483.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:23.442Z,1509698483.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:23.472Z,1509698483.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:23.850Z,1509698483.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:23.865Z,1509698483.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:24.256Z,1509698484.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:24.271Z,1509698484.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:24.660Z,1509698484.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:24.675Z,1509698484.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:25.057Z,1509698485.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:25.078Z,1509698485.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:25.444Z,1509698485.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:25.468Z,1509698485.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:25.848Z,1509698485.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:25.865Z,1509698485.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:26.251Z,1509698486.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:26.266Z,1509698486.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:26.650Z,1509698486.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:26.671Z,1509698486.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:27.060Z,1509698487.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:27.075Z,1509698487.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:27.457Z,1509698487.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:27.471Z,1509698487.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:27.860Z,1509698487.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:27.875Z,1509698487.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:28.249Z,1509698488.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:28.267Z,1509698488.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:28.651Z,1509698488.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:28.670Z,1509698488.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:29.051Z,1509698489.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:29.066Z,1509698489.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:29.449Z,1509698489.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:29.464Z,1509698489.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:29.850Z,1509698489.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:29.865Z,1509698489.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:30.260Z,1509698490.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:30.275Z,1509698490.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:30.667Z,1509698490.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:30.687Z,1509698490.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:31.057Z,1509698491.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:31.071Z,1509698491.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:31.439Z,1509698491.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:31.464Z,1509698491.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:31.841Z,1509698491.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:31.870Z,1509698491.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:32.243Z,1509698492.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:32.268Z,1509698492.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:32.642Z,1509698492.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:32.675Z,1509698492.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:33.061Z,1509698493.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:33.146Z,1509698493.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:33.457Z,1509698493.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:33.472Z,1509698493.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:33.861Z,1509698493.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:33.876Z,1509698493.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:34.242Z,1509698494.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:34.310Z,1509698494.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:34.640Z,1509698494.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:34.666Z,1509698494.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:35.037Z,1509698495.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:35.091Z,1509698495.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:35.436Z,1509698495.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:35.506Z,1509698495.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:35.840Z,1509698495.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:35.865Z,1509698495.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:36.261Z,1509698496.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:36.277Z,1509698496.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:36.661Z,1509698496.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:36.676Z,1509698496.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:37.065Z,1509698497.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:37.080Z,1509698497.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:37.437Z,1509698497.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:37.462Z,1509698497.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:37.843Z,1509698497.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:37.869Z,1509698497.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:38.244Z,1509698498.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:38.269Z,1509698498.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:38.636Z,1509698498.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:38.664Z,1509698498.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:39.062Z,1509698499.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:39.077Z,1509698499.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:39.465Z,1509698499.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:39.480Z,1509698499.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:39.862Z,1509698499.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:39.877Z,1509698499.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:40.243Z,1509698500.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:40.274Z,1509698500.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:43.350Z,1509698503.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:43.374Z,1509698503.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:43.514Z,1509698503.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:43.547Z,1509698503.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:43.921Z,1509698503.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:43.936Z,1509698503.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:44.324Z,1509698504.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:44.339Z,1509698504.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:44.721Z,1509698504.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:44.736Z,1509698504.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:45.111Z,1509698505.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:45.126Z,1509698505.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:45.510Z,1509698505.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:45.526Z,1509698505.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:45.921Z,1509698505.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:45.936Z,1509698505.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:46.321Z,1509698506.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:46.336Z,1509698506.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:46.721Z,1509698506.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:46.736Z,1509698506.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:47.111Z,1509698507.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:47.126Z,1509698507.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:47.508Z,1509698507.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:47.583Z,1509698507.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:47.922Z,1509698507.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:47.937Z,1509698507.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:48.325Z,1509698508.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:48.379Z,1509698508.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:48.721Z,1509698508.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:48.736Z,1509698508.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:49.103Z,1509698509.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:49.151Z,1509698509.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:49.503Z,1509698509.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:49.528Z,1509698509.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:49.921Z,1509698509.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:49.978Z,1509698509.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:50.325Z,1509698510.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:50.340Z,1509698510.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:50.721Z,1509698510.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:50.736Z,1509698510.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:51.103Z,1509698511.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:51.129Z,1509698511.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:51.502Z,1509698511.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:51.528Z,1509698511.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:51.920Z,1509698511.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:51.935Z,1509698511.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:52.318Z,1509698512.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:52.338Z,1509698512.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:52.718Z,1509698512.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:52.732Z,1509698512.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:53.103Z,1509698513.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:53.129Z,1509698513.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:53.129Z,1509698513.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 169
2017-11-03T08:41:53.129Z,1509698513.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:41:53.131Z,1509698513.131 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:53.131Z,1509698513.131 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 169
2017-11-03T08:41:53.131Z,1509698513.131 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:41:53.133Z,1509698513.133 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:53.133Z,1509698513.133 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 169
2017-11-03T08:41:53.133Z,1509698513.133 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:41:53.221Z,1509698513.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:41:53.221Z,1509698513.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:41:53.221Z,1509698513.221 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:41:53.511Z,1509698513.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:53.628Z,1509698513.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:41:53.628Z,1509698513.628 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 169
2017-11-03T08:41:53.629Z,1509698513.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:41:53.629Z,1509698513.629 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 169
2017-11-03T08:41:53.629Z,1509698513.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:41:53.629Z,1509698513.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 169
2017-11-03T08:41:53.913Z,1509698513.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:53.938Z,1509698513.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:41:53.938Z,1509698513.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:41:53.938Z,1509698513.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:41:53.939Z,1509698513.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:41:53.939Z,1509698513.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:41:53.939Z,1509698513.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:41:53.940Z,1509698513.940 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:41:53.940Z,1509698513.940 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:41:53.941Z,1509698513.941 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:41:54.322Z,1509698514.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:54.344Z,1509698514.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:41:54.345Z,1509698514.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:54.718Z,1509698514.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:54.740Z,1509698514.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:41:54.741Z,1509698514.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:55.100Z,1509698515.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:55.114Z,1509698515.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:41:55.115Z,1509698515.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:55.500Z,1509698515.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:55.515Z,1509698515.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:41:55.516Z,1509698515.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:55.918Z,1509698515.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:55.940Z,1509698515.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:41:55.941Z,1509698515.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:56.313Z,1509698516.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:56.344Z,1509698516.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:41:56.345Z,1509698516.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:56.433Z,1509698516.433 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T08:41:56.718Z,1509698516.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:56.739Z,1509698516.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:41:56.739Z,1509698516.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:56.821Z,1509698516.821 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T08:41:56.821Z,1509698516.821 [DropWeight] No Fault, FailCount= 1
2017-11-03T08:41:57.105Z,1509698517.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:57.142Z,1509698517.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:41:57.143Z,1509698517.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:57.500Z,1509698517.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:57.514Z,1509698517.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:41:57.515Z,1509698517.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:57.918Z,1509698517.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:57.946Z,1509698517.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:41:57.947Z,1509698517.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:58.318Z,1509698518.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:58.348Z,1509698518.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:41:58.349Z,1509698518.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:58.721Z,1509698518.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:58.750Z,1509698518.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:41:58.751Z,1509698518.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:59.106Z,1509698519.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:59.121Z,1509698519.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:41:59.122Z,1509698519.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:59.505Z,1509698519.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:59.519Z,1509698519.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:41:59.521Z,1509698519.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:41:59.921Z,1509698519.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:41:59.946Z,1509698519.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:41:59.947Z,1509698519.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:00.314Z,1509698520.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:00.345Z,1509698520.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:42:00.345Z,1509698520.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:00.722Z,1509698520.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:00.750Z,1509698520.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:42:00.751Z,1509698520.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:01.105Z,1509698521.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:01.119Z,1509698521.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:42:01.120Z,1509698521.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:01.506Z,1509698521.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:01.521Z,1509698521.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:42:01.522Z,1509698521.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:01.917Z,1509698521.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:01.986Z,1509698521.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T08:42:01.987Z,1509698521.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:02.317Z,1509698522.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:02.331Z,1509698522.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:42:02.332Z,1509698522.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:02.717Z,1509698522.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:02.766Z,1509698522.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:42:02.767Z,1509698522.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:03.110Z,1509698523.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:03.125Z,1509698523.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:42:03.126Z,1509698523.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:03.505Z,1509698523.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:03.542Z,1509698523.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:42:03.543Z,1509698523.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:03.917Z,1509698523.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:03.938Z,1509698523.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:42:03.939Z,1509698523.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:04.317Z,1509698524.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:04.366Z,1509698524.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:42:04.367Z,1509698524.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:04.717Z,1509698524.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:04.732Z,1509698524.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:42:04.733Z,1509698524.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:05.111Z,1509698525.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:05.127Z,1509698525.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:42:05.128Z,1509698525.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:05.510Z,1509698525.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:05.525Z,1509698525.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:42:05.526Z,1509698525.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:05.917Z,1509698525.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:05.933Z,1509698525.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:42:05.934Z,1509698525.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:06.318Z,1509698526.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:06.332Z,1509698526.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:42:06.334Z,1509698526.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:06.716Z,1509698526.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:06.730Z,1509698526.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:42:06.731Z,1509698526.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:07.103Z,1509698527.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:07.122Z,1509698527.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:42:07.123Z,1509698527.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:07.504Z,1509698527.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:07.519Z,1509698527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:42:07.519Z,1509698527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:07.916Z,1509698527.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:07.930Z,1509698527.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:42:07.931Z,1509698527.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:08.316Z,1509698528.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:08.330Z,1509698528.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:42:08.331Z,1509698528.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:08.716Z,1509698528.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:08.731Z,1509698528.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:42:08.732Z,1509698528.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:09.111Z,1509698529.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:09.125Z,1509698529.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:42:09.126Z,1509698529.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:09.504Z,1509698529.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:09.519Z,1509698529.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:42:09.520Z,1509698529.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:09.916Z,1509698529.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:09.938Z,1509698529.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:42:09.939Z,1509698529.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:10.317Z,1509698530.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:10.331Z,1509698530.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:42:10.332Z,1509698530.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:10.716Z,1509698530.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:10.730Z,1509698530.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:42:10.731Z,1509698530.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:11.111Z,1509698531.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:11.126Z,1509698531.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:42:11.127Z,1509698531.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:11.510Z,1509698531.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:11.525Z,1509698531.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:42:11.526Z,1509698531.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:11.916Z,1509698531.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:11.931Z,1509698531.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:42:11.932Z,1509698531.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:12.318Z,1509698532.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:12.332Z,1509698532.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:42:12.333Z,1509698532.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:12.716Z,1509698532.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:12.730Z,1509698532.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:42:12.731Z,1509698532.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:13.111Z,1509698533.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:13.125Z,1509698533.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T08:42:13.126Z,1509698533.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:13.511Z,1509698533.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:13.526Z,1509698533.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:13.920Z,1509698533.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:13.935Z,1509698533.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:14.320Z,1509698534.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:14.342Z,1509698534.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:14.717Z,1509698534.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:14.732Z,1509698534.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:15.111Z,1509698535.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:15.126Z,1509698535.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:15.512Z,1509698535.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:15.534Z,1509698535.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:15.917Z,1509698535.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:15.932Z,1509698535.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:16.319Z,1509698536.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:16.383Z,1509698536.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:16.715Z,1509698536.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:16.739Z,1509698536.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:17.111Z,1509698537.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:17.131Z,1509698537.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:17.500Z,1509698537.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:17.525Z,1509698537.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:17.924Z,1509698537.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:17.939Z,1509698537.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:18.324Z,1509698538.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:18.339Z,1509698538.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:18.721Z,1509698538.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:18.735Z,1509698538.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:19.103Z,1509698539.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:19.129Z,1509698539.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:19.496Z,1509698539.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:19.519Z,1509698539.519 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:42:19.519Z,1509698539.519 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:42:19.520Z,1509698539.520 [BPC1](ERROR): Communications Fault
2017-11-03T08:42:19.528Z,1509698539.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:19.630Z,1509698539.630 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:42:19.921Z,1509698539.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:19.936Z,1509698539.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:20.322Z,1509698540.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:20.342Z,1509698540.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:20.718Z,1509698540.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:20.733Z,1509698540.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:20.821Z,1509698540.821 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:42:20.821Z,1509698540.821 [BPC1] No Fault, FailCount= 1
2017-11-03T08:42:21.103Z,1509698541.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:21.182Z,1509698541.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:21.501Z,1509698541.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:21.527Z,1509698541.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:21.925Z,1509698541.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:21.941Z,1509698541.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:22.325Z,1509698542.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:22.340Z,1509698542.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:22.726Z,1509698542.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:22.746Z,1509698542.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:23.114Z,1509698543.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:23.129Z,1509698543.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:23.500Z,1509698543.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:23.526Z,1509698543.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:23.922Z,1509698543.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:23.942Z,1509698543.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:24.326Z,1509698544.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:24.341Z,1509698544.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:24.721Z,1509698544.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:24.736Z,1509698544.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:25.102Z,1509698545.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:25.170Z,1509698545.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:25.496Z,1509698545.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:25.527Z,1509698545.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:25.921Z,1509698545.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:25.942Z,1509698545.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:26.322Z,1509698546.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:26.338Z,1509698546.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:26.721Z,1509698546.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:26.737Z,1509698546.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:27.103Z,1509698547.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:27.128Z,1509698547.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:27.500Z,1509698547.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:27.527Z,1509698547.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:27.915Z,1509698547.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:27.935Z,1509698547.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:28.325Z,1509698548.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:28.339Z,1509698548.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:28.726Z,1509698548.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:28.747Z,1509698548.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:29.104Z,1509698549.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:29.129Z,1509698549.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:29.500Z,1509698549.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:29.525Z,1509698549.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:29.922Z,1509698549.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:29.937Z,1509698549.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:30.316Z,1509698550.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:30.331Z,1509698550.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:30.721Z,1509698550.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:30.735Z,1509698550.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:31.102Z,1509698551.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:31.128Z,1509698551.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:31.496Z,1509698551.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:31.526Z,1509698551.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:31.921Z,1509698551.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:31.935Z,1509698551.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:32.325Z,1509698552.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:32.340Z,1509698552.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:32.721Z,1509698552.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:32.743Z,1509698552.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:33.101Z,1509698553.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:33.126Z,1509698553.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:33.500Z,1509698553.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:33.527Z,1509698553.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:33.922Z,1509698553.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:33.936Z,1509698553.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:34.321Z,1509698554.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:34.335Z,1509698554.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:34.725Z,1509698554.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:34.740Z,1509698554.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:35.104Z,1509698555.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:35.130Z,1509698555.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:35.500Z,1509698555.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:35.533Z,1509698555.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:35.925Z,1509698555.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:35.986Z,1509698555.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:36.325Z,1509698556.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:36.340Z,1509698556.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:36.719Z,1509698556.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:36.743Z,1509698556.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:37.102Z,1509698557.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:37.129Z,1509698557.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:37.500Z,1509698557.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:37.570Z,1509698557.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:37.922Z,1509698557.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:37.936Z,1509698557.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:38.309Z,1509698558.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:38.355Z,1509698558.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:38.717Z,1509698558.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:38.763Z,1509698558.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:39.104Z,1509698559.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:39.126Z,1509698559.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:39.513Z,1509698559.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:39.528Z,1509698559.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:39.914Z,1509698559.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:39.935Z,1509698559.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:40.318Z,1509698560.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:40.333Z,1509698560.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:43.406Z,1509698563.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:43.421Z,1509698563.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:43.525Z,1509698563.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:43.570Z,1509698563.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:43.934Z,1509698563.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:43.963Z,1509698563.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:44.332Z,1509698564.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:44.369Z,1509698564.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:44.733Z,1509698564.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:44.764Z,1509698564.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:45.152Z,1509698565.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:45.173Z,1509698565.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:45.550Z,1509698565.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:45.567Z,1509698565.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:45.953Z,1509698565.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:45.975Z,1509698565.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:46.332Z,1509698566.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:46.363Z,1509698566.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:46.735Z,1509698566.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:46.761Z,1509698566.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:47.134Z,1509698567.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:47.159Z,1509698567.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:47.532Z,1509698567.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:47.563Z,1509698567.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:47.957Z,1509698567.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:47.972Z,1509698567.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:48.353Z,1509698568.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:48.368Z,1509698568.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:48.752Z,1509698568.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:48.774Z,1509698568.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:49.128Z,1509698569.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:49.163Z,1509698569.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:49.529Z,1509698569.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:49.579Z,1509698569.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:49.933Z,1509698569.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:49.966Z,1509698569.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:50.336Z,1509698570.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:50.366Z,1509698570.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:50.733Z,1509698570.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:50.813Z,1509698570.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:51.153Z,1509698571.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:51.168Z,1509698571.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:51.556Z,1509698571.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:51.608Z,1509698571.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:51.953Z,1509698571.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:51.968Z,1509698571.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:52.332Z,1509698572.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:52.402Z,1509698572.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:52.728Z,1509698572.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:52.775Z,1509698572.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:53.134Z,1509698573.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:53.159Z,1509698573.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:53.535Z,1509698573.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:53.560Z,1509698573.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:53.957Z,1509698573.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:53.972Z,1509698573.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:54.353Z,1509698574.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:54.368Z,1509698574.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:54.741Z,1509698574.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:54.767Z,1509698574.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:55.135Z,1509698575.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:55.165Z,1509698575.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:55.533Z,1509698575.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:55.565Z,1509698575.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:55.933Z,1509698575.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:55.967Z,1509698575.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:56.328Z,1509698576.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:56.343Z,1509698576.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:56.733Z,1509698576.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:56.764Z,1509698576.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:57.145Z,1509698577.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:57.171Z,1509698577.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:57.541Z,1509698577.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:57.568Z,1509698577.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:57.945Z,1509698577.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:57.975Z,1509698577.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:58.332Z,1509698578.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:58.347Z,1509698578.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:58.733Z,1509698578.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:58.747Z,1509698578.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:59.134Z,1509698579.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:59.165Z,1509698579.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:59.533Z,1509698579.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:59.547Z,1509698579.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:42:59.941Z,1509698579.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:42:59.975Z,1509698579.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:00.350Z,1509698580.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:00.376Z,1509698580.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:00.746Z,1509698580.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:00.778Z,1509698580.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:01.132Z,1509698581.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:01.176Z,1509698581.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:01.533Z,1509698581.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:01.548Z,1509698581.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:01.932Z,1509698581.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:01.947Z,1509698581.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:02.336Z,1509698582.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:02.351Z,1509698582.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:02.732Z,1509698582.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:02.747Z,1509698582.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:03.145Z,1509698583.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:03.198Z,1509698583.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:03.545Z,1509698583.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:03.571Z,1509698583.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:03.946Z,1509698583.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:03.969Z,1509698583.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:04.332Z,1509698584.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:04.347Z,1509698584.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:04.731Z,1509698584.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:04.747Z,1509698584.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:05.132Z,1509698585.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:05.190Z,1509698585.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:05.532Z,1509698585.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:05.547Z,1509698585.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:05.946Z,1509698585.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:05.977Z,1509698585.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:06.350Z,1509698586.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:06.407Z,1509698586.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:06.749Z,1509698586.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:06.779Z,1509698586.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:07.131Z,1509698587.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:07.177Z,1509698587.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:07.536Z,1509698587.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:07.595Z,1509698587.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:07.936Z,1509698587.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:07.955Z,1509698587.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:08.332Z,1509698588.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:08.347Z,1509698588.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:08.739Z,1509698588.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:08.754Z,1509698588.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:09.149Z,1509698589.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:09.173Z,1509698589.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:09.545Z,1509698589.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:09.577Z,1509698589.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:09.950Z,1509698589.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:09.973Z,1509698589.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:10.332Z,1509698590.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:10.347Z,1509698590.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:10.731Z,1509698590.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:10.746Z,1509698590.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:11.137Z,1509698591.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:11.151Z,1509698591.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:11.535Z,1509698591.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:11.555Z,1509698591.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:11.945Z,1509698591.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:11.977Z,1509698591.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:12.353Z,1509698592.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:12.383Z,1509698592.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:12.749Z,1509698592.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:12.774Z,1509698592.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:13.131Z,1509698593.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:13.146Z,1509698593.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:13.539Z,1509698593.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:13.554Z,1509698593.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:13.935Z,1509698593.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:13.955Z,1509698593.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:14.340Z,1509698594.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:14.354Z,1509698594.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:14.736Z,1509698594.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:14.751Z,1509698594.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:15.149Z,1509698595.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:15.173Z,1509698595.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:15.545Z,1509698595.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:15.576Z,1509698595.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:15.950Z,1509698595.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:15.973Z,1509698595.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:16.337Z,1509698596.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:16.351Z,1509698596.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:16.739Z,1509698596.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:16.754Z,1509698596.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:17.138Z,1509698597.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:17.153Z,1509698597.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:17.537Z,1509698597.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:17.552Z,1509698597.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:17.945Z,1509698597.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:17.994Z,1509698597.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:18.353Z,1509698598.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:18.382Z,1509698598.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:18.753Z,1509698598.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:18.783Z,1509698598.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:19.138Z,1509698599.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:19.153Z,1509698599.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:19.541Z,1509698599.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:19.556Z,1509698599.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:19.940Z,1509698599.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:19.955Z,1509698599.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:20.342Z,1509698600.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:20.356Z,1509698600.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:20.740Z,1509698600.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:20.755Z,1509698600.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:21.153Z,1509698601.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:21.181Z,1509698601.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:21.544Z,1509698601.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:21.558Z,1509698601.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:21.954Z,1509698601.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:21.983Z,1509698601.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:22.342Z,1509698602.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:22.357Z,1509698602.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:22.741Z,1509698602.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:22.749Z,1509698602.749 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:43:22.749Z,1509698602.749 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:43:22.749Z,1509698602.749 [BPC1](ERROR): Communications Fault
2017-11-03T08:43:22.757Z,1509698602.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:22.872Z,1509698602.872 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:43:23.142Z,1509698603.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:23.158Z,1509698603.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:23.541Z,1509698603.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:23.557Z,1509698603.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:23.954Z,1509698603.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:23.990Z,1509698603.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:24.077Z,1509698604.077 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:43:24.077Z,1509698604.077 [BPC1] No Fault, FailCount= 1
2017-11-03T08:43:24.355Z,1509698604.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:24.438Z,1509698604.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:24.746Z,1509698604.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:24.762Z,1509698604.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:25.139Z,1509698605.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:25.188Z,1509698605.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:25.540Z,1509698605.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:25.555Z,1509698605.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:25.940Z,1509698605.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:25.955Z,1509698605.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:26.340Z,1509698606.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:26.355Z,1509698606.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:26.740Z,1509698606.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:26.755Z,1509698606.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:27.146Z,1509698607.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:27.161Z,1509698607.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:27.553Z,1509698607.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:27.567Z,1509698607.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:27.942Z,1509698607.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:27.957Z,1509698607.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:28.340Z,1509698608.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:28.355Z,1509698608.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:28.737Z,1509698608.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:28.751Z,1509698608.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:29.143Z,1509698609.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:29.158Z,1509698609.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:29.540Z,1509698609.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:29.559Z,1509698609.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:29.948Z,1509698609.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:29.963Z,1509698609.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:30.344Z,1509698610.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:30.366Z,1509698610.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:30.746Z,1509698610.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:30.761Z,1509698610.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:31.142Z,1509698611.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:31.156Z,1509698611.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:31.542Z,1509698611.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:31.557Z,1509698611.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:31.940Z,1509698611.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:31.955Z,1509698611.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:32.343Z,1509698612.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:32.358Z,1509698612.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:32.740Z,1509698612.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:32.755Z,1509698612.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:33.146Z,1509698613.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:33.161Z,1509698613.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:33.545Z,1509698613.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:33.560Z,1509698613.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:33.950Z,1509698613.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:33.965Z,1509698613.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:34.340Z,1509698614.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:34.355Z,1509698614.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:34.742Z,1509698614.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:34.757Z,1509698614.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:35.138Z,1509698615.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:35.153Z,1509698615.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:35.542Z,1509698615.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:35.557Z,1509698615.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:35.949Z,1509698615.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:36.005Z,1509698616.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:36.349Z,1509698616.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:36.413Z,1509698616.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:36.753Z,1509698616.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:36.768Z,1509698616.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:37.143Z,1509698617.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:37.158Z,1509698617.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:37.537Z,1509698617.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:37.594Z,1509698617.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:37.942Z,1509698617.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:37.957Z,1509698617.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:38.339Z,1509698618.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:38.379Z,1509698618.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:38.743Z,1509698618.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:38.816Z,1509698618.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:39.153Z,1509698619.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:39.168Z,1509698619.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:39.553Z,1509698619.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:39.574Z,1509698619.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:39.954Z,1509698619.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:39.969Z,1509698619.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:40.343Z,1509698620.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:40.362Z,1509698620.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:43.419Z,1509698623.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:43.447Z,1509698623.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:43.572Z,1509698623.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:43.604Z,1509698623.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:43.993Z,1509698623.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:44.012Z,1509698624.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:44.394Z,1509698624.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:44.408Z,1509698624.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:44.797Z,1509698624.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:44.817Z,1509698624.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:45.173Z,1509698625.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:45.209Z,1509698625.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:45.575Z,1509698625.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:45.605Z,1509698625.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:45.975Z,1509698625.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:46.001Z,1509698626.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:46.374Z,1509698626.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:46.400Z,1509698626.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:46.768Z,1509698626.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:46.803Z,1509698626.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:47.195Z,1509698627.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:47.213Z,1509698627.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:47.594Z,1509698627.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:47.609Z,1509698627.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:47.998Z,1509698627.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:48.021Z,1509698628.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:48.375Z,1509698628.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:48.402Z,1509698628.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:48.775Z,1509698628.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:48.805Z,1509698628.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:49.175Z,1509698629.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:49.277Z,1509698629.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:49.575Z,1509698629.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:49.601Z,1509698629.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:49.992Z,1509698629.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:50.010Z,1509698630.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:50.398Z,1509698630.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:50.443Z,1509698630.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:50.801Z,1509698630.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:50.822Z,1509698630.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:51.172Z,1509698631.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:51.237Z,1509698631.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:51.568Z,1509698631.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:51.623Z,1509698631.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:51.975Z,1509698631.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:52.004Z,1509698632.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:52.373Z,1509698632.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:52.400Z,1509698632.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:52.775Z,1509698632.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:52.800Z,1509698632.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:53.193Z,1509698633.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:53.210Z,1509698633.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:53.598Z,1509698633.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:53.615Z,1509698633.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:53.997Z,1509698633.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:54.012Z,1509698634.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:54.368Z,1509698634.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:54.399Z,1509698634.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:54.772Z,1509698634.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:54.806Z,1509698634.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:55.175Z,1509698635.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:55.213Z,1509698635.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:55.568Z,1509698635.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:55.605Z,1509698635.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:55.993Z,1509698635.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:56.008Z,1509698636.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:56.381Z,1509698636.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:56.409Z,1509698636.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:56.781Z,1509698636.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:56.815Z,1509698636.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:57.177Z,1509698637.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:57.205Z,1509698637.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:57.572Z,1509698637.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:57.587Z,1509698637.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:57.975Z,1509698637.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:58.012Z,1509698638.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:58.380Z,1509698638.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:58.418Z,1509698638.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:58.772Z,1509698638.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:58.787Z,1509698638.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:59.194Z,1509698639.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:59.226Z,1509698639.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:59.585Z,1509698639.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:43:59.618Z,1509698639.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:43:59.984Z,1509698639.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:00.021Z,1509698640.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:00.377Z,1509698640.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:00.393Z,1509698640.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:00.776Z,1509698640.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:00.791Z,1509698640.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:01.177Z,1509698641.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:01.191Z,1509698641.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:01.578Z,1509698641.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:01.593Z,1509698641.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:01.989Z,1509698641.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:02.021Z,1509698642.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:02.389Z,1509698642.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:02.486Z,1509698642.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:02.782Z,1509698642.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:02.797Z,1509698642.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:03.177Z,1509698643.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:03.230Z,1509698643.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:03.576Z,1509698643.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:03.591Z,1509698643.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:03.977Z,1509698643.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:04.030Z,1509698644.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:04.382Z,1509698644.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:04.435Z,1509698644.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:04.775Z,1509698644.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:04.791Z,1509698644.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:05.191Z,1509698645.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:05.220Z,1509698645.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:05.590Z,1509698645.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:05.625Z,1509698645.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:05.994Z,1509698645.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:06.021Z,1509698646.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:06.375Z,1509698646.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:06.390Z,1509698646.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:06.775Z,1509698646.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:06.790Z,1509698646.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:07.176Z,1509698647.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:07.190Z,1509698647.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:07.574Z,1509698647.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:07.589Z,1509698647.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:07.989Z,1509698647.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:08.025Z,1509698648.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:08.389Z,1509698648.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:08.417Z,1509698648.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:08.789Z,1509698648.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:08.822Z,1509698648.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:09.175Z,1509698649.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:09.190Z,1509698649.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:09.575Z,1509698649.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:09.590Z,1509698649.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:09.975Z,1509698649.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:09.991Z,1509698649.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:10.376Z,1509698650.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:10.390Z,1509698650.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:10.775Z,1509698650.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:10.790Z,1509698650.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:11.190Z,1509698651.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:11.220Z,1509698651.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:11.589Z,1509698651.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:11.619Z,1509698651.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:11.989Z,1509698651.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:12.023Z,1509698652.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:12.376Z,1509698652.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:12.391Z,1509698652.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:12.775Z,1509698652.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:12.790Z,1509698652.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:13.176Z,1509698653.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:13.191Z,1509698653.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:13.580Z,1509698653.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:13.595Z,1509698653.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:13.989Z,1509698653.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:14.021Z,1509698654.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:14.389Z,1509698654.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:14.421Z,1509698654.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:14.789Z,1509698654.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:14.821Z,1509698654.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:15.175Z,1509698655.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:15.266Z,1509698655.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:15.577Z,1509698655.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:15.591Z,1509698655.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:15.980Z,1509698655.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:16.027Z,1509698656.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:16.380Z,1509698656.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:16.394Z,1509698656.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:16.780Z,1509698656.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:16.827Z,1509698656.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:17.193Z,1509698657.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:17.242Z,1509698657.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:17.593Z,1509698657.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:17.621Z,1509698657.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:17.993Z,1509698657.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:18.023Z,1509698658.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:18.380Z,1509698658.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:18.395Z,1509698658.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:18.779Z,1509698658.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:18.794Z,1509698658.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:19.180Z,1509698659.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:19.195Z,1509698659.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:19.576Z,1509698659.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:19.591Z,1509698659.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:19.993Z,1509698659.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:20.030Z,1509698660.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:20.393Z,1509698660.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:20.424Z,1509698660.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:20.782Z,1509698660.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:20.798Z,1509698660.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:21.179Z,1509698661.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:21.194Z,1509698661.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:21.580Z,1509698661.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:21.595Z,1509698661.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:21.976Z,1509698661.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:21.991Z,1509698661.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:22.380Z,1509698662.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:22.395Z,1509698662.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:22.780Z,1509698662.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:22.794Z,1509698662.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:23.193Z,1509698663.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:23.225Z,1509698663.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:23.588Z,1509698663.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:23.603Z,1509698663.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:23.985Z,1509698663.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:24.004Z,1509698664.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:24.383Z,1509698664.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:24.398Z,1509698664.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:24.781Z,1509698664.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:24.795Z,1509698664.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:25.183Z,1509698665.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:25.198Z,1509698665.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:25.582Z,1509698665.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:25.600Z,1509698665.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:25.986Z,1509698665.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:26.001Z,1509698666.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:26.386Z,1509698666.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:26.401Z,1509698666.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:26.786Z,1509698666.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:26.801Z,1509698666.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:27.181Z,1509698667.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:27.198Z,1509698667.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:27.583Z,1509698667.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:27.647Z,1509698667.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:27.967Z,1509698667.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:28.037Z,1509698668.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:28.369Z,1509698668.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:28.394Z,1509698668.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:28.781Z,1509698668.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:28.840Z,1509698668.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:29.194Z,1509698669.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:29.211Z,1509698669.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:29.595Z,1509698669.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:29.646Z,1509698669.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:29.993Z,1509698669.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:30.050Z,1509698670.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:30.383Z,1509698670.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:30.402Z,1509698670.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:30.783Z,1509698670.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:30.802Z,1509698670.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:31.182Z,1509698671.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:31.197Z,1509698671.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:31.583Z,1509698671.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:31.603Z,1509698671.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:31.992Z,1509698671.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:32.011Z,1509698672.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:32.393Z,1509698672.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:32.408Z,1509698672.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:32.792Z,1509698672.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:32.822Z,1509698672.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:33.183Z,1509698673.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:33.197Z,1509698673.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:33.582Z,1509698673.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:33.599Z,1509698673.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:33.982Z,1509698673.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:34.003Z,1509698674.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:34.383Z,1509698674.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:34.397Z,1509698674.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:34.782Z,1509698674.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:34.797Z,1509698674.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:35.193Z,1509698675.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:35.211Z,1509698675.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:35.595Z,1509698675.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:35.610Z,1509698675.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:35.996Z,1509698675.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:36.022Z,1509698676.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:36.383Z,1509698676.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:36.403Z,1509698676.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:36.782Z,1509698676.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:36.799Z,1509698676.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:37.182Z,1509698677.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:37.198Z,1509698677.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:37.583Z,1509698677.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:37.603Z,1509698677.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:37.993Z,1509698677.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:38.010Z,1509698678.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:38.395Z,1509698678.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:38.413Z,1509698678.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:38.791Z,1509698678.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:38.813Z,1509698678.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:39.172Z,1509698679.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:39.199Z,1509698679.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:39.583Z,1509698679.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:39.598Z,1509698679.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:39.983Z,1509698679.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:40.002Z,1509698680.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:40.386Z,1509698680.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:40.401Z,1509698680.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:43.461Z,1509698683.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:43.547Z,1509698683.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:43.705Z,1509698683.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:43.721Z,1509698683.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:44.100Z,1509698684.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:44.123Z,1509698684.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:44.502Z,1509698684.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:44.551Z,1509698684.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:44.885Z,1509698684.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:44.906Z,1509698684.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:45.291Z,1509698685.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:45.345Z,1509698685.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:45.689Z,1509698685.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:45.703Z,1509698685.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:46.100Z,1509698686.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:46.154Z,1509698686.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:46.499Z,1509698686.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:46.514Z,1509698686.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:46.900Z,1509698686.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:46.915Z,1509698686.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:47.291Z,1509698687.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:47.311Z,1509698687.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:47.690Z,1509698687.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:47.705Z,1509698687.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:48.090Z,1509698688.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:48.105Z,1509698688.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:48.491Z,1509698688.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:48.506Z,1509698688.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:48.901Z,1509698688.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:48.916Z,1509698688.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:49.302Z,1509698689.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:49.317Z,1509698689.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:49.701Z,1509698689.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:49.716Z,1509698689.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:50.092Z,1509698690.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:50.107Z,1509698690.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:50.490Z,1509698690.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:50.505Z,1509698690.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:50.900Z,1509698690.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:50.962Z,1509698690.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:51.302Z,1509698691.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:51.323Z,1509698691.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:51.699Z,1509698691.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:51.714Z,1509698691.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:52.083Z,1509698692.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:52.109Z,1509698692.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:52.495Z,1509698692.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:52.510Z,1509698692.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:52.908Z,1509698692.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:52.923Z,1509698692.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:53.304Z,1509698693.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:53.319Z,1509698693.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:53.704Z,1509698693.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:53.719Z,1509698693.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:54.084Z,1509698694.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:54.111Z,1509698694.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:54.111Z,1509698694.111 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 170
2017-11-03T08:44:54.111Z,1509698694.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:44:54.113Z,1509698694.113 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:54.113Z,1509698694.113 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 170
2017-11-03T08:44:54.113Z,1509698694.113 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:44:54.115Z,1509698694.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:54.115Z,1509698694.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 170
2017-11-03T08:44:54.115Z,1509698694.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:44:54.189Z,1509698694.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:44:54.189Z,1509698694.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:44:54.189Z,1509698694.189 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:44:54.479Z,1509698694.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:54.600Z,1509698694.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:44:54.601Z,1509698694.601 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 170
2017-11-03T08:44:54.601Z,1509698694.601 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:44:54.601Z,1509698694.601 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 170
2017-11-03T08:44:54.602Z,1509698694.602 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:44:54.602Z,1509698694.602 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 170
2017-11-03T08:44:54.901Z,1509698694.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:54.922Z,1509698694.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:44:54.922Z,1509698694.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:44:54.923Z,1509698694.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:44:54.923Z,1509698694.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:44:54.923Z,1509698694.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:44:54.924Z,1509698694.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:44:54.924Z,1509698694.924 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:44:54.925Z,1509698694.925 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:44:54.925Z,1509698694.925 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:44:55.296Z,1509698695.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:55.323Z,1509698695.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:44:55.324Z,1509698695.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:55.702Z,1509698695.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:55.718Z,1509698695.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:44:55.719Z,1509698695.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:56.083Z,1509698696.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:56.113Z,1509698696.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:44:56.114Z,1509698696.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:56.483Z,1509698696.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:56.515Z,1509698696.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:44:56.517Z,1509698696.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:56.902Z,1509698696.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:56.945Z,1509698696.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:44:56.946Z,1509698696.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:57.293Z,1509698697.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:57.322Z,1509698697.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:44:57.323Z,1509698697.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:57.693Z,1509698697.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:57.722Z,1509698697.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:44:57.723Z,1509698697.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:58.082Z,1509698698.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:58.129Z,1509698698.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:44:58.130Z,1509698698.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:58.480Z,1509698698.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:58.519Z,1509698698.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:44:58.520Z,1509698698.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:58.893Z,1509698698.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:58.939Z,1509698698.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:44:58.940Z,1509698698.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:59.293Z,1509698699.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:59.338Z,1509698699.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:44:59.339Z,1509698699.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:44:59.693Z,1509698699.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:44:59.725Z,1509698699.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:44:59.726Z,1509698699.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:00.080Z,1509698700.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:00.094Z,1509698700.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:45:00.095Z,1509698700.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:00.480Z,1509698700.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:00.495Z,1509698700.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:45:00.496Z,1509698700.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:00.893Z,1509698700.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:00.924Z,1509698700.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:45:00.925Z,1509698700.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:01.293Z,1509698701.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:01.326Z,1509698701.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:45:01.327Z,1509698701.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:01.693Z,1509698701.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:01.725Z,1509698701.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:45:01.726Z,1509698701.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:02.081Z,1509698702.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:02.095Z,1509698702.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:45:02.096Z,1509698702.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:02.479Z,1509698702.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:02.493Z,1509698702.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:45:02.494Z,1509698702.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:02.894Z,1509698702.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:02.908Z,1509698702.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T08:45:02.909Z,1509698702.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:03.293Z,1509698703.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:03.314Z,1509698703.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:45:03.315Z,1509698703.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:03.693Z,1509698703.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:03.714Z,1509698703.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:45:03.715Z,1509698703.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:04.090Z,1509698704.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:04.110Z,1509698704.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:45:04.111Z,1509698704.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:04.488Z,1509698704.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:04.510Z,1509698704.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:45:04.511Z,1509698704.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:04.897Z,1509698704.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:04.911Z,1509698704.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:45:04.912Z,1509698704.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:05.294Z,1509698705.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:05.308Z,1509698705.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:45:05.309Z,1509698705.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:05.694Z,1509698705.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:05.708Z,1509698705.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:45:05.709Z,1509698705.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:06.085Z,1509698706.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:06.099Z,1509698706.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:45:06.100Z,1509698706.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:06.487Z,1509698706.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:06.506Z,1509698706.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:45:06.507Z,1509698706.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:06.894Z,1509698706.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:06.908Z,1509698706.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:45:06.909Z,1509698706.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:07.297Z,1509698707.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:07.311Z,1509698707.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:45:07.312Z,1509698707.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:07.694Z,1509698707.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:07.714Z,1509698707.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:45:07.715Z,1509698707.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:08.091Z,1509698708.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:08.106Z,1509698708.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:45:08.107Z,1509698708.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:08.490Z,1509698708.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:08.504Z,1509698708.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:45:08.505Z,1509698708.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:08.894Z,1509698708.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:08.908Z,1509698708.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:45:08.909Z,1509698708.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:09.293Z,1509698709.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:09.314Z,1509698709.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:45:09.315Z,1509698709.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:09.697Z,1509698709.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:09.739Z,1509698709.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:45:09.740Z,1509698709.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:10.089Z,1509698710.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:10.104Z,1509698710.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:45:10.105Z,1509698710.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:10.490Z,1509698710.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:10.505Z,1509698710.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:45:10.506Z,1509698710.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:10.896Z,1509698710.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:10.910Z,1509698710.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:45:10.911Z,1509698710.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:11.294Z,1509698711.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:11.308Z,1509698711.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:45:11.309Z,1509698711.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:11.693Z,1509698711.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:11.755Z,1509698711.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:45:11.756Z,1509698711.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:12.088Z,1509698712.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:12.102Z,1509698712.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:45:12.103Z,1509698712.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:12.487Z,1509698712.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:12.538Z,1509698712.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:45:12.539Z,1509698712.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:12.894Z,1509698712.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:12.908Z,1509698712.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:45:12.909Z,1509698712.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:13.297Z,1509698713.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:13.336Z,1509698713.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:45:13.337Z,1509698713.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:13.694Z,1509698713.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:13.745Z,1509698713.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:45:13.746Z,1509698713.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:14.090Z,1509698714.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:14.104Z,1509698714.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T08:45:14.105Z,1509698714.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:14.490Z,1509698714.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:14.505Z,1509698714.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:14.894Z,1509698714.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:14.909Z,1509698714.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:15.294Z,1509698715.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:15.314Z,1509698715.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:15.698Z,1509698715.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:15.712Z,1509698715.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:16.089Z,1509698716.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:16.104Z,1509698716.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:16.488Z,1509698716.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:16.511Z,1509698716.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:16.897Z,1509698716.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:16.912Z,1509698716.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:17.293Z,1509698717.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:17.309Z,1509698717.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:17.693Z,1509698717.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:17.708Z,1509698717.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:18.085Z,1509698718.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:18.099Z,1509698718.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:18.490Z,1509698718.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:18.505Z,1509698718.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:18.893Z,1509698718.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:18.908Z,1509698718.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:19.297Z,1509698719.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:19.311Z,1509698719.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:19.694Z,1509698719.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:19.709Z,1509698719.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:20.090Z,1509698720.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:20.111Z,1509698720.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:20.217Z,1509698720.217 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:45:20.217Z,1509698720.217 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T08:45:20.248Z,1509698720.248 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:45:20.249Z,1509698720.249 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:45:20.249Z,1509698720.249 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:45:20.249Z,1509698720.249 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:45:20.490Z,1509698720.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:20.504Z,1509698720.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:20.898Z,1509698720.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:20.913Z,1509698720.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:21.293Z,1509698721.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:21.309Z,1509698721.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:21.693Z,1509698721.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:21.714Z,1509698721.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:22.091Z,1509698722.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:22.106Z,1509698722.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:22.488Z,1509698722.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:22.503Z,1509698722.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:22.897Z,1509698722.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:22.919Z,1509698722.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:23.294Z,1509698723.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:23.309Z,1509698723.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:23.693Z,1509698723.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:23.709Z,1509698723.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:24.089Z,1509698724.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:24.104Z,1509698724.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:24.367Z,1509698724.367 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:45:24.431Z,1509698724.431 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:45:24.433Z,1509698724.433 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:45:24.434Z,1509698724.434 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:45:24.434Z,1509698724.434 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:45:24.504Z,1509698724.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:24.588Z,1509698724.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:24.910Z,1509698724.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:24.931Z,1509698724.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:25.333Z,1509698725.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:25.424Z,1509698725.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:25.701Z,1509698725.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:25.767Z,1509698725.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:26.081Z,1509698726.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:26.107Z,1509698726.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:26.477Z,1509698726.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:26.506Z,1509698726.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:26.900Z,1509698726.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:26.958Z,1509698726.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:27.301Z,1509698727.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:27.316Z,1509698727.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:27.703Z,1509698727.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:27.759Z,1509698727.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:28.081Z,1509698728.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:28.151Z,1509698728.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:28.480Z,1509698728.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:28.506Z,1509698728.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:28.910Z,1509698728.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:28.931Z,1509698728.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:29.302Z,1509698729.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:29.318Z,1509698729.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:29.705Z,1509698729.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:29.721Z,1509698729.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:30.079Z,1509698730.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:30.107Z,1509698730.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:30.494Z,1509698730.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:30.510Z,1509698730.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:30.908Z,1509698730.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:30.924Z,1509698730.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:31.303Z,1509698731.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:31.331Z,1509698731.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:31.703Z,1509698731.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:31.723Z,1509698731.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:32.081Z,1509698732.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:32.109Z,1509698732.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:32.495Z,1509698732.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:32.524Z,1509698732.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:32.915Z,1509698732.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:32.955Z,1509698732.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:33.301Z,1509698733.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:33.324Z,1509698733.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:33.702Z,1509698733.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:33.718Z,1509698733.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:34.084Z,1509698734.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:34.110Z,1509698734.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:34.480Z,1509698734.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:34.506Z,1509698734.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:34.907Z,1509698734.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:34.924Z,1509698734.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:35.305Z,1509698735.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:35.321Z,1509698735.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:35.701Z,1509698735.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:35.717Z,1509698735.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:36.083Z,1509698736.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:36.114Z,1509698736.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:36.483Z,1509698736.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:36.508Z,1509698736.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:36.912Z,1509698736.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:36.928Z,1509698736.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:37.302Z,1509698737.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:37.318Z,1509698737.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:37.700Z,1509698737.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:37.715Z,1509698737.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:38.082Z,1509698738.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:38.109Z,1509698738.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:38.476Z,1509698738.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:38.499Z,1509698738.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:38.910Z,1509698738.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:39.020Z,1509698739.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:39.301Z,1509698739.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:39.323Z,1509698739.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:39.702Z,1509698739.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:39.743Z,1509698739.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:40.082Z,1509698740.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:40.109Z,1509698740.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:40.485Z,1509698740.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:40.500Z,1509698740.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:43.770Z,1509698743.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:43.833Z,1509698743.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:43.841Z,1509698743.841 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T08:40:43.3Z
2017-11-03T08:45:43.841Z,1509698743.841 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T08:45:43.842Z,1509698743.842 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T08:45:43.982Z,1509698743.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:44.021Z,1509698744.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:44.501Z,1509698744.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:44.565Z,1509698744.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:44.780Z,1509698744.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:44.839Z,1509698744.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:45.177Z,1509698745.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:45.199Z,1509698745.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:45.577Z,1509698745.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:45.592Z,1509698745.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:48.874Z,1509698748.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:48.889Z,1509698748.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:48.993Z,1509698748.993 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0200.lzma
2017-11-03T08:45:49.037Z,1509698749.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:49.071Z,1509698749.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:49.428Z,1509698749.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:49.444Z,1509698749.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:49.791Z,1509698749.791 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0200.lzma.bak
2017-11-03T08:45:49.792Z,1509698749.792 [DataOverHttps](INFO): SBD MOMSN=5183160
2017-11-03T08:45:49.825Z,1509698749.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:49.867Z,1509698749.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:50.440Z,1509698750.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:50.502Z,1509698750.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:50.645Z,1509698750.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:50.689Z,1509698750.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:53.861Z,1509698753.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:53.892Z,1509698753.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:54.049Z,1509698754.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:54.079Z,1509698754.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:54.445Z,1509698754.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:54.460Z,1509698754.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:54.831Z,1509698754.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:54.850Z,1509698754.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:55.271Z,1509698755.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:55.309Z,1509698755.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:55.653Z,1509698755.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:55.695Z,1509698755.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:58.918Z,1509698758.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:58.959Z,1509698758.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:59.043Z,1509698759.043 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171103T001125/Express0201.lzma
2017-11-03T08:45:59.085Z,1509698759.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:59.134Z,1509698759.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:59.489Z,1509698759.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:59.505Z,1509698759.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:45:59.847Z,1509698759.847 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0201.lzma.bak
2017-11-03T08:45:59.847Z,1509698759.847 [DataOverHttps](INFO): SBD MOMSN=5183162
2017-11-03T08:45:59.874Z,1509698759.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:45:59.947Z,1509698759.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:00.595Z,1509698760.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:00.610Z,1509698760.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:00.613Z,1509698760.613 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T08:46:00.613Z,1509698760.613 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T08:46:00.613Z,1509698760.613 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T08:46:00.848Z,1509698760.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:00.918Z,1509698760.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:06.319Z,1509698766.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:06.362Z,1509698766.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:06.527Z,1509698766.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:06.570Z,1509698766.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:06.958Z,1509698766.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:07.007Z,1509698767.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:07.297Z,1509698767.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:07.343Z,1509698767.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:07.691Z,1509698767.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:07.714Z,1509698767.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:08.095Z,1509698768.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:08.115Z,1509698768.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:08.493Z,1509698768.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:08.511Z,1509698768.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:08.897Z,1509698768.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:08.936Z,1509698768.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:09.300Z,1509698769.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:09.356Z,1509698769.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:09.704Z,1509698769.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:09.751Z,1509698769.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:10.094Z,1509698770.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:10.119Z,1509698770.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:10.492Z,1509698770.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:10.528Z,1509698770.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:10.902Z,1509698770.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:10.967Z,1509698770.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:11.303Z,1509698771.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:11.355Z,1509698771.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:11.701Z,1509698771.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:11.725Z,1509698771.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:12.095Z,1509698772.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:12.125Z,1509698772.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:12.487Z,1509698772.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:12.526Z,1509698772.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:12.903Z,1509698772.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:12.935Z,1509698772.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:13.308Z,1509698773.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:13.328Z,1509698773.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:13.696Z,1509698773.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:13.735Z,1509698773.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:14.086Z,1509698774.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:14.133Z,1509698774.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:14.484Z,1509698774.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:14.558Z,1509698774.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:14.923Z,1509698774.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:14.948Z,1509698774.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:15.322Z,1509698775.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:15.347Z,1509698775.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:15.726Z,1509698775.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:15.778Z,1509698775.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:16.086Z,1509698776.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:16.128Z,1509698776.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:16.509Z,1509698776.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:16.541Z,1509698776.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:16.900Z,1509698776.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:16.933Z,1509698776.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:17.298Z,1509698777.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:17.323Z,1509698777.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:17.724Z,1509698777.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:17.747Z,1509698777.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:18.104Z,1509698778.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:18.162Z,1509698778.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:18.493Z,1509698778.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:18.604Z,1509698778.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:18.894Z,1509698778.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:18.967Z,1509698778.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:19.308Z,1509698779.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:19.383Z,1509698779.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:19.690Z,1509698779.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:19.715Z,1509698779.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:20.085Z,1509698780.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:20.153Z,1509698780.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:20.484Z,1509698780.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:20.519Z,1509698780.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:20.953Z,1509698780.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:21.017Z,1509698781.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:21.305Z,1509698781.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:21.320Z,1509698781.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:21.710Z,1509698781.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:21.725Z,1509698781.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:22.088Z,1509698782.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:22.113Z,1509698782.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:22.487Z,1509698782.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:22.512Z,1509698782.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:22.903Z,1509698782.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:22.924Z,1509698782.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:23.307Z,1509698783.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:23.363Z,1509698783.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:23.705Z,1509698783.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:23.721Z,1509698783.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:24.108Z,1509698784.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:24.125Z,1509698784.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:24.487Z,1509698784.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:24.512Z,1509698784.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:24.903Z,1509698784.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:24.923Z,1509698784.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:25.298Z,1509698785.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:25.342Z,1509698785.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:25.700Z,1509698785.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:25.723Z,1509698785.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:26.092Z,1509698786.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:26.106Z,1509698786.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:26.496Z,1509698786.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:26.511Z,1509698786.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:26.902Z,1509698786.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:26.984Z,1509698786.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:27.301Z,1509698787.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:27.317Z,1509698787.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:27.702Z,1509698787.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:27.717Z,1509698787.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:28.094Z,1509698788.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:28.109Z,1509698788.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:28.495Z,1509698788.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:28.510Z,1509698788.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:28.905Z,1509698788.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:28.921Z,1509698788.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:29.300Z,1509698789.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:29.323Z,1509698789.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:29.700Z,1509698789.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:29.715Z,1509698789.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:30.097Z,1509698790.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:30.113Z,1509698790.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:30.495Z,1509698790.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:30.515Z,1509698790.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:30.914Z,1509698790.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:30.947Z,1509698790.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:31.302Z,1509698791.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:31.318Z,1509698791.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:31.700Z,1509698791.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:31.715Z,1509698791.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:32.093Z,1509698792.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:32.108Z,1509698792.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:32.495Z,1509698792.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:32.515Z,1509698792.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:32.913Z,1509698792.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:33.010Z,1509698793.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:33.304Z,1509698793.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:33.320Z,1509698793.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:33.704Z,1509698793.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:33.788Z,1509698793.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:34.095Z,1509698794.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:34.115Z,1509698794.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:34.492Z,1509698794.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:34.550Z,1509698794.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:34.934Z,1509698794.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:35.003Z,1509698795.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:35.293Z,1509698795.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:35.323Z,1509698795.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:35.705Z,1509698795.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:35.721Z,1509698795.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:36.086Z,1509698796.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:36.121Z,1509698796.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:36.487Z,1509698796.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:36.522Z,1509698796.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:36.897Z,1509698796.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:36.931Z,1509698796.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:37.315Z,1509698797.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:37.334Z,1509698797.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:37.710Z,1509698797.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:37.725Z,1509698797.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:38.082Z,1509698798.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:38.097Z,1509698798.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:38.486Z,1509698798.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:38.517Z,1509698798.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:38.897Z,1509698798.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:38.925Z,1509698798.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:39.332Z,1509698799.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:39.347Z,1509698799.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:39.697Z,1509698799.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:39.726Z,1509698799.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:40.089Z,1509698800.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:40.112Z,1509698800.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:40.491Z,1509698800.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:40.514Z,1509698800.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:40.894Z,1509698800.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:40.915Z,1509698800.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:41.305Z,1509698801.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:41.337Z,1509698801.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:41.698Z,1509698801.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:41.713Z,1509698801.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:42.094Z,1509698802.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:42.115Z,1509698802.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:42.492Z,1509698802.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:42.508Z,1509698802.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:42.898Z,1509698802.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:42.913Z,1509698802.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:43.306Z,1509698803.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:43.337Z,1509698803.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:43.706Z,1509698803.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:43.736Z,1509698803.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:44.093Z,1509698804.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:44.108Z,1509698804.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:44.492Z,1509698804.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:44.507Z,1509698804.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:44.909Z,1509698804.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:44.936Z,1509698804.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:45.298Z,1509698805.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:45.313Z,1509698805.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:45.698Z,1509698805.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:45.747Z,1509698805.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:46.092Z,1509698806.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:46.108Z,1509698806.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:46.490Z,1509698806.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:46.509Z,1509698806.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:46.910Z,1509698806.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:46.970Z,1509698806.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:47.301Z,1509698807.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:47.372Z,1509698807.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:47.704Z,1509698807.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:47.721Z,1509698807.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:48.096Z,1509698808.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:48.111Z,1509698808.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:48.495Z,1509698808.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:48.552Z,1509698808.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:48.935Z,1509698808.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:49.013Z,1509698809.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:49.305Z,1509698809.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:49.355Z,1509698809.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:49.705Z,1509698809.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:49.762Z,1509698809.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:50.085Z,1509698810.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:50.112Z,1509698810.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:50.487Z,1509698810.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:50.519Z,1509698810.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:50.901Z,1509698810.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:50.917Z,1509698810.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:51.321Z,1509698811.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:51.337Z,1509698811.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:51.706Z,1509698811.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:51.722Z,1509698811.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:52.085Z,1509698812.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:52.112Z,1509698812.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:52.484Z,1509698812.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:52.515Z,1509698812.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:52.909Z,1509698812.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:52.924Z,1509698812.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:53.314Z,1509698813.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:53.329Z,1509698813.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:53.706Z,1509698813.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:53.721Z,1509698813.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:54.081Z,1509698814.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:54.108Z,1509698814.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:54.481Z,1509698814.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:54.513Z,1509698814.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:54.893Z,1509698814.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:54.921Z,1509698814.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:55.297Z,1509698815.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:55.330Z,1509698815.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:55.693Z,1509698815.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:55.721Z,1509698815.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:56.085Z,1509698816.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:56.100Z,1509698816.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:56.491Z,1509698816.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:56.527Z,1509698816.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:56.915Z,1509698816.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:56.939Z,1509698816.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:57.301Z,1509698817.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:57.331Z,1509698817.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:57.694Z,1509698817.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:57.725Z,1509698817.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:58.086Z,1509698818.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:58.101Z,1509698818.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:58.487Z,1509698818.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:58.503Z,1509698818.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:58.924Z,1509698818.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:58.939Z,1509698818.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:59.297Z,1509698819.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:59.323Z,1509698819.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:46:59.697Z,1509698819.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:46:59.722Z,1509698819.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:00.088Z,1509698820.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:00.102Z,1509698820.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:00.484Z,1509698820.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:00.499Z,1509698820.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:00.914Z,1509698820.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:00.935Z,1509698820.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:01.301Z,1509698821.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:01.334Z,1509698821.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:04.638Z,1509698824.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:04.730Z,1509698824.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:04.873Z,1509698824.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:04.891Z,1509698824.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:05.296Z,1509698825.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:05.343Z,1509698825.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:05.673Z,1509698825.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:05.688Z,1509698825.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:06.084Z,1509698826.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:06.131Z,1509698826.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:06.486Z,1509698826.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:06.543Z,1509698826.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:06.884Z,1509698826.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:06.899Z,1509698826.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:07.279Z,1509698827.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:07.322Z,1509698827.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:07.672Z,1509698827.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:07.691Z,1509698827.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:08.073Z,1509698828.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:08.089Z,1509698828.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:08.474Z,1509698828.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:08.495Z,1509698828.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:08.884Z,1509698828.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:08.900Z,1509698828.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:09.284Z,1509698829.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:09.303Z,1509698829.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:09.684Z,1509698829.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:09.699Z,1509698829.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:10.077Z,1509698830.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:10.092Z,1509698830.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:10.475Z,1509698830.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:10.490Z,1509698830.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:10.881Z,1509698830.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:10.896Z,1509698830.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:11.284Z,1509698831.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:11.299Z,1509698831.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:11.684Z,1509698831.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:11.699Z,1509698831.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:12.073Z,1509698832.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:12.088Z,1509698832.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:12.476Z,1509698832.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:12.491Z,1509698832.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:12.881Z,1509698832.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:12.896Z,1509698832.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:13.284Z,1509698833.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:13.299Z,1509698833.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:13.684Z,1509698833.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:13.700Z,1509698833.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:14.074Z,1509698834.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:14.089Z,1509698834.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:14.472Z,1509698834.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:14.487Z,1509698834.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:14.885Z,1509698834.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:14.900Z,1509698834.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:15.284Z,1509698835.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:15.299Z,1509698835.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:15.686Z,1509698835.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:15.701Z,1509698835.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:16.078Z,1509698836.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:16.093Z,1509698836.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:16.476Z,1509698836.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:16.491Z,1509698836.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:16.886Z,1509698836.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:16.960Z,1509698836.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:17.285Z,1509698837.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:17.301Z,1509698837.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:17.685Z,1509698837.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:17.700Z,1509698837.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:18.076Z,1509698838.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:18.091Z,1509698838.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:18.478Z,1509698838.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:18.558Z,1509698838.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:18.887Z,1509698838.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:18.902Z,1509698838.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:19.299Z,1509698839.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:19.343Z,1509698839.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:19.692Z,1509698839.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:19.707Z,1509698839.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:20.066Z,1509698840.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:20.134Z,1509698840.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:20.465Z,1509698840.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:20.534Z,1509698840.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:20.848Z,1509698840.848 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:47:20.848Z,1509698840.848 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T08:47:20.848Z,1509698840.848 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:47:20.903Z,1509698840.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:20.932Z,1509698840.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:47:20.937Z,1509698840.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:21.026Z,1509698841.026 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:47:21.253Z,1509698841.253 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:47:21.318Z,1509698841.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:21.355Z,1509698841.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:47:21.356Z,1509698841.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:21.470Z,1509698841.470 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:47:21.686Z,1509698841.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:21.707Z,1509698841.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:47:21.708Z,1509698841.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:22.065Z,1509698842.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:22.093Z,1509698842.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:47:22.094Z,1509698842.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:22.465Z,1509698842.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:22.492Z,1509698842.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:47:22.494Z,1509698842.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:22.885Z,1509698842.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:22.901Z,1509698842.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:47:22.902Z,1509698842.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:22.988Z,1509698842.988 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:47:22.988Z,1509698842.988 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T08:47:23.084Z,1509698843.084 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:47:23.085Z,1509698843.085 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:47:23.085Z,1509698843.085 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:47:23.085Z,1509698843.085 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:47:23.289Z,1509698843.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:23.304Z,1509698843.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:47:23.305Z,1509698843.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:23.686Z,1509698843.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:23.715Z,1509698843.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:47:23.717Z,1509698843.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:24.068Z,1509698844.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:24.083Z,1509698844.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T08:47:24.084Z,1509698844.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:24.472Z,1509698844.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:24.486Z,1509698844.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:47:24.487Z,1509698844.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:24.885Z,1509698844.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:24.914Z,1509698844.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:47:24.915Z,1509698844.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:25.285Z,1509698845.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:25.313Z,1509698845.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:47:25.314Z,1509698845.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:25.677Z,1509698845.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:25.691Z,1509698845.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:47:25.692Z,1509698845.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:26.073Z,1509698846.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:26.088Z,1509698846.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:47:26.089Z,1509698846.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:26.472Z,1509698846.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:26.487Z,1509698846.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:47:26.488Z,1509698846.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:26.877Z,1509698846.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:26.891Z,1509698846.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:47:26.892Z,1509698846.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:27.205Z,1509698847.205 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:47:27.280Z,1509698847.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:27.322Z,1509698847.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:47:27.323Z,1509698847.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:27.335Z,1509698847.335 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:47:27.336Z,1509698847.336 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:47:27.337Z,1509698847.337 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:47:27.338Z,1509698847.338 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:47:27.686Z,1509698847.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:27.706Z,1509698847.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:47:27.707Z,1509698847.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:28.076Z,1509698848.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:28.091Z,1509698848.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:28.474Z,1509698848.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:28.490Z,1509698848.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:28.884Z,1509698848.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:28.900Z,1509698848.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:29.288Z,1509698849.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:29.314Z,1509698849.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:29.701Z,1509698849.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:29.732Z,1509698849.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:30.074Z,1509698850.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:30.089Z,1509698850.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:30.463Z,1509698850.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:30.499Z,1509698850.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:30.886Z,1509698850.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:30.901Z,1509698850.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:31.285Z,1509698851.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:31.307Z,1509698851.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:31.685Z,1509698851.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:31.707Z,1509698851.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:32.066Z,1509698852.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:32.092Z,1509698852.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:32.464Z,1509698852.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:32.523Z,1509698852.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:32.882Z,1509698852.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:32.915Z,1509698852.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:33.285Z,1509698853.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:33.301Z,1509698853.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:33.685Z,1509698853.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:33.700Z,1509698853.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:34.065Z,1509698854.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:34.111Z,1509698854.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:34.467Z,1509698854.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:34.498Z,1509698854.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:34.874Z,1509698854.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:34.940Z,1509698854.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:35.290Z,1509698855.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:35.304Z,1509698855.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:35.685Z,1509698855.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:35.743Z,1509698855.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:36.066Z,1509698856.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:36.097Z,1509698856.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:36.464Z,1509698856.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:36.499Z,1509698856.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:36.897Z,1509698856.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:36.912Z,1509698856.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:37.286Z,1509698857.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:37.301Z,1509698857.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:37.691Z,1509698857.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:37.706Z,1509698857.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:38.070Z,1509698858.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:38.097Z,1509698858.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:38.467Z,1509698858.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:38.491Z,1509698858.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:38.887Z,1509698858.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:38.901Z,1509698858.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:39.277Z,1509698859.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:39.302Z,1509698859.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:39.677Z,1509698859.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:39.702Z,1509698859.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:40.064Z,1509698860.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:40.079Z,1509698860.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:40.465Z,1509698860.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:40.479Z,1509698860.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:40.881Z,1509698860.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:40.910Z,1509698860.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:41.281Z,1509698861.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:41.305Z,1509698861.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:41.681Z,1509698861.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:41.711Z,1509698861.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:42.066Z,1509698862.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:42.081Z,1509698862.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:42.467Z,1509698862.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:42.481Z,1509698862.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:42.878Z,1509698862.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:42.969Z,1509698862.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:43.281Z,1509698863.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:43.296Z,1509698863.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:43.681Z,1509698863.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:43.702Z,1509698863.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:44.074Z,1509698864.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:44.090Z,1509698864.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:44.472Z,1509698864.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:44.487Z,1509698864.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:44.881Z,1509698864.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:44.899Z,1509698864.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:45.301Z,1509698865.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:45.332Z,1509698865.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:45.681Z,1509698865.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:45.697Z,1509698865.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:46.076Z,1509698866.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:46.091Z,1509698866.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:46.475Z,1509698866.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:46.491Z,1509698866.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:46.880Z,1509698866.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:46.896Z,1509698866.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:47.299Z,1509698867.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:47.334Z,1509698867.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:47.682Z,1509698867.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:47.749Z,1509698867.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:48.073Z,1509698868.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:48.135Z,1509698868.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:48.475Z,1509698868.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:48.491Z,1509698868.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:48.886Z,1509698868.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:48.901Z,1509698868.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:49.284Z,1509698869.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:49.335Z,1509698869.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:49.684Z,1509698869.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:49.699Z,1509698869.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:50.075Z,1509698870.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:50.134Z,1509698870.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:50.472Z,1509698870.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:50.529Z,1509698870.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:50.885Z,1509698870.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:50.900Z,1509698870.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:51.284Z,1509698871.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:51.299Z,1509698871.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:51.684Z,1509698871.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:51.699Z,1509698871.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:52.075Z,1509698872.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:52.090Z,1509698872.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:52.476Z,1509698872.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:52.499Z,1509698872.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:52.882Z,1509698872.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:52.897Z,1509698872.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:53.286Z,1509698873.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:53.300Z,1509698873.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:53.685Z,1509698873.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:53.700Z,1509698873.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:54.075Z,1509698874.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:54.095Z,1509698874.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:54.477Z,1509698874.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:54.492Z,1509698874.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:54.885Z,1509698874.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:54.900Z,1509698874.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:55.285Z,1509698875.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:55.307Z,1509698875.307 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:55.307Z,1509698875.307 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 171
2017-11-03T08:47:55.307Z,1509698875.307 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:47:55.309Z,1509698875.309 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:55.309Z,1509698875.309 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 171
2017-11-03T08:47:55.309Z,1509698875.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:47:55.311Z,1509698875.311 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:55.311Z,1509698875.311 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 171
2017-11-03T08:47:55.311Z,1509698875.311 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:47:55.421Z,1509698875.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:47:55.422Z,1509698875.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:47:55.422Z,1509698875.422 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:47:55.690Z,1509698875.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:55.797Z,1509698875.797 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:47:55.797Z,1509698875.797 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 171
2017-11-03T08:47:55.798Z,1509698875.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:47:55.798Z,1509698875.798 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 171
2017-11-03T08:47:55.798Z,1509698875.798 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:47:55.798Z,1509698875.798 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 171
2017-11-03T08:47:56.073Z,1509698876.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:56.094Z,1509698876.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:47:56.095Z,1509698876.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:47:56.095Z,1509698876.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:47:56.095Z,1509698876.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:47:56.096Z,1509698876.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:47:56.096Z,1509698876.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:47:56.097Z,1509698876.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:47:56.097Z,1509698876.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:47:56.097Z,1509698876.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:47:56.463Z,1509698876.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:56.499Z,1509698876.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:56.919Z,1509698876.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:57.001Z,1509698877.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:57.286Z,1509698877.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:57.305Z,1509698877.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:57.686Z,1509698877.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:57.705Z,1509698877.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:58.068Z,1509698878.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:58.105Z,1509698878.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:58.465Z,1509698878.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:58.500Z,1509698878.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:58.886Z,1509698878.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:58.902Z,1509698878.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:59.300Z,1509698879.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:59.315Z,1509698879.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:47:59.686Z,1509698879.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:47:59.707Z,1509698879.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:00.066Z,1509698880.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:00.098Z,1509698880.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:00.465Z,1509698880.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:00.480Z,1509698880.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:00.878Z,1509698880.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:00.911Z,1509698880.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:01.297Z,1509698881.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:01.321Z,1509698881.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:01.694Z,1509698881.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:01.709Z,1509698881.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:04.948Z,1509698884.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:05.036Z,1509698885.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:05.168Z,1509698885.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:05.203Z,1509698885.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:05.573Z,1509698885.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:05.638Z,1509698885.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:05.986Z,1509698885.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:06.001Z,1509698886.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:06.373Z,1509698886.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:06.440Z,1509698886.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:06.762Z,1509698886.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:06.808Z,1509698886.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:07.162Z,1509698887.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:07.177Z,1509698887.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:07.563Z,1509698887.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:07.582Z,1509698887.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:07.973Z,1509698887.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:08.014Z,1509698888.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:08.381Z,1509698888.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:08.411Z,1509698888.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:08.791Z,1509698888.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:08.840Z,1509698888.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:09.164Z,1509698889.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:09.178Z,1509698889.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:09.564Z,1509698889.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:09.579Z,1509698889.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:09.968Z,1509698889.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:09.983Z,1509698889.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:10.365Z,1509698890.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:10.380Z,1509698890.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:10.764Z,1509698890.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:10.779Z,1509698890.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:11.181Z,1509698891.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:11.214Z,1509698891.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:11.577Z,1509698891.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:11.608Z,1509698891.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:11.978Z,1509698891.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:12.007Z,1509698892.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:12.364Z,1509698892.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:12.379Z,1509698892.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:12.764Z,1509698892.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:12.779Z,1509698892.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:13.165Z,1509698893.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:13.231Z,1509698893.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:13.568Z,1509698893.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:13.583Z,1509698893.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:13.978Z,1509698893.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:13.998Z,1509698893.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:14.376Z,1509698894.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:14.403Z,1509698894.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:14.776Z,1509698894.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:14.791Z,1509698894.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:15.172Z,1509698895.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:15.250Z,1509698895.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:15.571Z,1509698895.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:15.591Z,1509698895.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:15.968Z,1509698895.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:15.991Z,1509698895.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:16.372Z,1509698896.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:16.394Z,1509698896.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:16.767Z,1509698896.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:16.787Z,1509698896.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:17.181Z,1509698897.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:17.196Z,1509698897.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:17.581Z,1509698897.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:17.599Z,1509698897.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:17.980Z,1509698897.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:17.989Z,1509698897.989 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T08:48:17.989Z,1509698897.989 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:48:17.989Z,1509698897.989 [BPC1](ERROR): Data Fault
2017-11-03T08:48:17.997Z,1509698897.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:18.088Z,1509698898.088 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:48:18.363Z,1509698898.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:18.395Z,1509698898.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:18.759Z,1509698898.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:18.791Z,1509698898.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:19.164Z,1509698899.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:19.189Z,1509698899.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:19.276Z,1509698899.276 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:48:19.277Z,1509698899.277 [BPC1] No Fault, FailCount= 1
2017-11-03T08:48:19.563Z,1509698899.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:19.642Z,1509698899.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:19.978Z,1509698899.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:19.992Z,1509698899.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:20.384Z,1509698900.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:20.435Z,1509698900.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:20.790Z,1509698900.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:20.809Z,1509698900.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:21.164Z,1509698901.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:21.190Z,1509698901.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:21.561Z,1509698901.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:21.591Z,1509698901.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:21.963Z,1509698901.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:21.990Z,1509698901.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:22.364Z,1509698902.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:22.391Z,1509698902.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:22.790Z,1509698902.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:22.843Z,1509698902.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:23.178Z,1509698903.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:23.193Z,1509698903.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:23.583Z,1509698903.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:23.599Z,1509698903.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:23.989Z,1509698903.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:24.009Z,1509698904.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:24.362Z,1509698904.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:24.388Z,1509698904.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:24.764Z,1509698904.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:24.791Z,1509698904.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:25.162Z,1509698905.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:25.188Z,1509698905.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:25.562Z,1509698905.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:25.588Z,1509698905.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:25.988Z,1509698905.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:26.003Z,1509698906.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:26.383Z,1509698906.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:26.398Z,1509698906.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:26.783Z,1509698906.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:26.798Z,1509698906.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:27.161Z,1509698907.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:27.250Z,1509698907.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:27.564Z,1509698907.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:27.579Z,1509698907.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:27.964Z,1509698907.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:27.983Z,1509698907.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:28.364Z,1509698908.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:28.379Z,1509698908.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:28.764Z,1509698908.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:28.779Z,1509698908.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:29.177Z,1509698909.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:29.260Z,1509698909.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:29.578Z,1509698909.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:29.618Z,1509698909.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:29.978Z,1509698909.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:30.009Z,1509698910.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:30.366Z,1509698910.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:30.385Z,1509698910.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:30.772Z,1509698910.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:30.787Z,1509698910.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:31.168Z,1509698911.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:31.183Z,1509698911.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:31.566Z,1509698911.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:31.582Z,1509698911.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:31.974Z,1509698911.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:31.989Z,1509698911.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:32.381Z,1509698912.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:32.474Z,1509698912.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:32.776Z,1509698912.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:32.791Z,1509698912.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:33.170Z,1509698913.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:33.219Z,1509698913.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:33.570Z,1509698913.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:33.585Z,1509698913.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:33.969Z,1509698913.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:34.019Z,1509698914.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:34.369Z,1509698914.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:34.383Z,1509698914.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:34.784Z,1509698914.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:34.843Z,1509698914.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:35.176Z,1509698915.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:35.218Z,1509698915.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:35.576Z,1509698915.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:35.591Z,1509698915.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:35.977Z,1509698915.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:35.992Z,1509698915.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:36.367Z,1509698916.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:36.387Z,1509698916.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:36.789Z,1509698916.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:36.839Z,1509698916.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:37.166Z,1509698917.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:37.198Z,1509698917.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:37.568Z,1509698917.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:37.590Z,1509698917.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:37.976Z,1509698917.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:37.991Z,1509698917.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:38.376Z,1509698918.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:38.391Z,1509698918.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:38.776Z,1509698918.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:38.791Z,1509698918.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:39.176Z,1509698919.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:39.191Z,1509698919.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:39.563Z,1509698919.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:39.582Z,1509698919.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:39.969Z,1509698919.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:39.985Z,1509698919.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:40.373Z,1509698920.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:40.388Z,1509698920.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:40.763Z,1509698920.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:40.782Z,1509698920.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:41.176Z,1509698921.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:41.245Z,1509698921.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:41.580Z,1509698921.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:41.622Z,1509698921.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:41.980Z,1509698921.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:42.003Z,1509698922.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:42.368Z,1509698922.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:42.383Z,1509698922.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:42.772Z,1509698922.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:42.786Z,1509698922.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:43.172Z,1509698923.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:43.245Z,1509698923.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:43.570Z,1509698923.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:43.585Z,1509698923.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:43.982Z,1509698923.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:43.997Z,1509698923.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:44.383Z,1509698924.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:44.403Z,1509698924.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:44.777Z,1509698924.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:44.792Z,1509698924.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:45.171Z,1509698925.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:45.186Z,1509698925.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:45.571Z,1509698925.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:45.591Z,1509698925.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:45.970Z,1509698925.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:45.985Z,1509698925.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:46.370Z,1509698926.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:46.385Z,1509698926.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:46.759Z,1509698926.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:46.839Z,1509698926.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:47.182Z,1509698927.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:47.197Z,1509698927.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:47.586Z,1509698927.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:47.635Z,1509698927.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:47.982Z,1509698927.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:48.002Z,1509698928.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:48.363Z,1509698928.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:48.434Z,1509698928.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:48.763Z,1509698928.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:48.838Z,1509698928.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:49.161Z,1509698929.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:49.188Z,1509698929.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:49.563Z,1509698929.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:49.589Z,1509698929.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:49.987Z,1509698929.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:50.006Z,1509698930.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:50.377Z,1509698930.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:50.393Z,1509698930.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:50.794Z,1509698930.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:50.833Z,1509698930.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:51.161Z,1509698931.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:51.199Z,1509698931.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:51.563Z,1509698931.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:51.589Z,1509698931.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:51.963Z,1509698931.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:51.989Z,1509698931.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:52.364Z,1509698932.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:52.391Z,1509698932.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:52.756Z,1509698932.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:52.787Z,1509698932.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:53.178Z,1509698933.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:53.193Z,1509698933.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:53.586Z,1509698933.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:53.601Z,1509698933.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:53.982Z,1509698933.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:53.997Z,1509698933.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:54.363Z,1509698934.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:54.389Z,1509698934.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:54.761Z,1509698934.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:54.788Z,1509698934.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:55.160Z,1509698935.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:55.248Z,1509698935.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:55.563Z,1509698935.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:55.589Z,1509698935.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:55.986Z,1509698935.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:56.006Z,1509698936.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:56.385Z,1509698936.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:56.401Z,1509698936.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:56.781Z,1509698936.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:56.803Z,1509698936.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:57.163Z,1509698937.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:57.249Z,1509698937.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:57.563Z,1509698937.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:57.595Z,1509698937.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:57.960Z,1509698937.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:57.995Z,1509698937.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:58.364Z,1509698938.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:58.395Z,1509698938.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:58.759Z,1509698938.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:58.793Z,1509698938.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:59.181Z,1509698939.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:59.200Z,1509698939.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:59.582Z,1509698939.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:59.597Z,1509698939.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:48:59.983Z,1509698939.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:48:59.998Z,1509698939.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:00.360Z,1509698940.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:00.424Z,1509698940.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:00.770Z,1509698940.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:00.819Z,1509698940.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:01.163Z,1509698941.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:01.198Z,1509698941.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:01.564Z,1509698941.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:01.617Z,1509698941.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:01.973Z,1509698941.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:02.010Z,1509698942.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:05.326Z,1509698945.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:05.388Z,1509698945.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:05.545Z,1509698945.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:05.592Z,1509698945.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:05.922Z,1509698945.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:05.986Z,1509698945.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:06.320Z,1509698946.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:06.350Z,1509698946.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:06.723Z,1509698946.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:06.749Z,1509698946.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:07.142Z,1509698947.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:07.157Z,1509698947.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:07.545Z,1509698947.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:07.560Z,1509698947.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:07.940Z,1509698947.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:07.955Z,1509698947.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:08.320Z,1509698948.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:08.351Z,1509698948.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:08.720Z,1509698948.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:08.750Z,1509698948.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:09.121Z,1509698949.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:09.148Z,1509698949.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:09.519Z,1509698949.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:09.555Z,1509698949.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:09.934Z,1509698949.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:09.949Z,1509698949.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:10.333Z,1509698950.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:10.348Z,1509698950.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:10.733Z,1509698950.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:10.754Z,1509698950.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:11.128Z,1509698951.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:11.143Z,1509698951.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:11.522Z,1509698951.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:11.552Z,1509698951.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:11.932Z,1509698951.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:11.947Z,1509698951.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:12.331Z,1509698952.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:12.351Z,1509698952.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:12.744Z,1509698952.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:12.779Z,1509698952.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:13.142Z,1509698953.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:13.158Z,1509698953.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:13.538Z,1509698953.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:13.553Z,1509698953.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:13.943Z,1509698953.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:13.958Z,1509698953.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:14.331Z,1509698954.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:14.346Z,1509698954.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:14.735Z,1509698954.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:14.767Z,1509698954.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:15.121Z,1509698955.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:15.151Z,1509698955.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:15.521Z,1509698955.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:15.554Z,1509698955.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:15.945Z,1509698955.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:15.962Z,1509698955.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:16.341Z,1509698956.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:16.356Z,1509698956.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:16.754Z,1509698956.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:16.805Z,1509698956.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:17.123Z,1509698957.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:17.149Z,1509698957.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:17.520Z,1509698957.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:17.575Z,1509698957.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:17.923Z,1509698957.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:17.954Z,1509698957.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:18.321Z,1509698958.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:18.376Z,1509698958.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:18.762Z,1509698958.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:18.820Z,1509698958.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:19.133Z,1509698959.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:19.159Z,1509698959.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:19.529Z,1509698959.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:19.575Z,1509698959.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:19.933Z,1509698959.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:19.958Z,1509698959.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:20.320Z,1509698960.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:20.371Z,1509698960.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:20.720Z,1509698960.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:20.779Z,1509698960.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:21.125Z,1509698961.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:21.140Z,1509698961.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:21.520Z,1509698961.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:21.535Z,1509698961.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:21.933Z,1509698961.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:21.958Z,1509698961.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:22.333Z,1509698962.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:22.358Z,1509698962.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:22.733Z,1509698962.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:22.759Z,1509698962.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:23.120Z,1509698963.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:23.135Z,1509698963.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:23.272Z,1509698963.272 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:49:23.272Z,1509698963.272 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T08:49:23.273Z,1509698963.273 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:49:23.522Z,1509698963.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:23.552Z,1509698963.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:49:23.553Z,1509698963.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:23.637Z,1509698963.637 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:49:23.677Z,1509698963.677 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:49:23.771Z,1509698963.771 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:49:23.929Z,1509698963.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:23.945Z,1509698963.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:49:23.946Z,1509698963.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:24.330Z,1509698964.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:24.345Z,1509698964.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:49:24.346Z,1509698964.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:24.731Z,1509698964.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:24.747Z,1509698964.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:49:24.747Z,1509698964.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:25.141Z,1509698965.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:25.156Z,1509698965.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:49:25.157Z,1509698965.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:25.264Z,1509698965.264 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:49:25.265Z,1509698965.265 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T08:49:25.385Z,1509698965.385 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:49:25.386Z,1509698965.386 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:49:25.386Z,1509698965.386 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:49:25.386Z,1509698965.386 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:49:25.540Z,1509698965.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:25.555Z,1509698965.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:49:25.556Z,1509698965.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:25.940Z,1509698965.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:25.955Z,1509698965.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:49:25.956Z,1509698965.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:26.333Z,1509698966.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:26.347Z,1509698966.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:49:26.348Z,1509698966.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:26.729Z,1509698966.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:26.750Z,1509698966.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:49:26.751Z,1509698966.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:27.130Z,1509698967.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:27.145Z,1509698967.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:49:27.146Z,1509698967.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:27.530Z,1509698967.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:27.544Z,1509698967.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:49:27.545Z,1509698967.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:27.903Z,1509698967.903 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T08:49:27.904Z,1509698967.904 [NAL9602] Data Fault, FailCount= 2
2017-11-03T08:49:27.904Z,1509698967.904 [NAL9602](ERROR): Data Fault
2017-11-03T08:49:27.937Z,1509698967.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:27.958Z,1509698967.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:49:27.959Z,1509698967.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:28.060Z,1509698968.060 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T08:49:28.303Z,1509698968.303 [NAL9602](INFO): Powering down
2017-11-03T08:49:28.336Z,1509698968.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:28.351Z,1509698968.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:49:28.352Z,1509698968.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:28.730Z,1509698968.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:28.745Z,1509698968.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:49:28.746Z,1509698968.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:29.128Z,1509698969.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:29.143Z,1509698969.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:49:29.144Z,1509698969.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:29.225Z,1509698969.225 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T08:49:29.225Z,1509698969.225 [NAL9602] No Fault, FailCount= 2
2017-11-03T08:49:29.530Z,1509698969.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:29.556Z,1509698969.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:49:29.561Z,1509698969.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:29.587Z,1509698969.587 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:49:29.692Z,1509698969.692 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:49:29.693Z,1509698969.693 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:49:29.694Z,1509698969.694 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:49:29.694Z,1509698969.694 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:49:29.942Z,1509698969.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:29.984Z,1509698969.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:49:29.985Z,1509698969.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:30.331Z,1509698970.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:30.351Z,1509698970.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:30.719Z,1509698970.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:30.754Z,1509698970.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:31.123Z,1509698971.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:31.153Z,1509698971.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:31.523Z,1509698971.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:31.554Z,1509698971.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:31.921Z,1509698971.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:31.956Z,1509698971.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:32.321Z,1509698972.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:32.379Z,1509698972.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:32.729Z,1509698972.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:32.780Z,1509698972.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:33.123Z,1509698973.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:33.159Z,1509698973.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:33.520Z,1509698973.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:33.574Z,1509698973.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:33.927Z,1509698973.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:33.942Z,1509698973.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:34.321Z,1509698974.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:34.374Z,1509698974.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:34.724Z,1509698974.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:34.783Z,1509698974.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:35.127Z,1509698975.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:35.142Z,1509698975.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:35.521Z,1509698975.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:35.536Z,1509698975.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:35.926Z,1509698975.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:35.961Z,1509698975.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:36.325Z,1509698976.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:36.340Z,1509698976.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:36.719Z,1509698976.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:36.736Z,1509698976.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:37.120Z,1509698977.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:37.136Z,1509698977.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:37.519Z,1509698977.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:37.536Z,1509698977.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:37.925Z,1509698977.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:37.943Z,1509698977.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:38.327Z,1509698978.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:38.344Z,1509698978.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:38.719Z,1509698978.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:38.734Z,1509698978.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:39.119Z,1509698979.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:39.133Z,1509698979.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:39.520Z,1509698979.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:39.535Z,1509698979.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:39.920Z,1509698979.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:39.935Z,1509698979.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:40.326Z,1509698980.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:40.341Z,1509698980.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:40.720Z,1509698980.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:40.734Z,1509698980.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:41.119Z,1509698981.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:41.134Z,1509698981.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:41.519Z,1509698981.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:41.533Z,1509698981.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:41.927Z,1509698981.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:41.963Z,1509698981.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:42.327Z,1509698982.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:42.347Z,1509698982.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:42.723Z,1509698982.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:42.738Z,1509698982.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:43.124Z,1509698983.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:43.138Z,1509698983.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:43.523Z,1509698983.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:43.539Z,1509698983.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:43.941Z,1509698983.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:43.989Z,1509698983.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:44.323Z,1509698984.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:44.349Z,1509698984.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:44.717Z,1509698984.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:44.744Z,1509698984.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:45.116Z,1509698985.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:45.150Z,1509698985.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:45.521Z,1509698985.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:45.550Z,1509698985.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:45.922Z,1509698985.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:45.949Z,1509698985.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:46.327Z,1509698986.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:46.352Z,1509698986.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:46.721Z,1509698986.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:46.801Z,1509698986.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:47.116Z,1509698987.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:47.173Z,1509698987.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:47.521Z,1509698987.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:47.550Z,1509698987.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:47.921Z,1509698987.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:47.986Z,1509698987.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:48.314Z,1509698988.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:48.344Z,1509698988.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:48.721Z,1509698988.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:48.767Z,1509698988.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:49.121Z,1509698989.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:49.167Z,1509698989.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:49.522Z,1509698989.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:49.553Z,1509698989.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:49.917Z,1509698989.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:49.953Z,1509698989.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:50.321Z,1509698990.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:50.352Z,1509698990.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:50.718Z,1509698990.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:50.733Z,1509698990.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:51.122Z,1509698991.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:51.159Z,1509698991.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:51.523Z,1509698991.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:51.557Z,1509698991.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:51.931Z,1509698991.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:51.957Z,1509698991.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:52.322Z,1509698992.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:52.359Z,1509698992.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:52.721Z,1509698992.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:52.735Z,1509698992.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:53.116Z,1509698993.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:53.131Z,1509698993.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:53.516Z,1509698993.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:53.530Z,1509698993.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:53.924Z,1509698993.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:53.958Z,1509698993.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:54.319Z,1509698994.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:54.334Z,1509698994.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:54.719Z,1509698994.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:54.733Z,1509698994.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:55.119Z,1509698995.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:55.135Z,1509698995.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:55.519Z,1509698995.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:55.534Z,1509698995.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:55.924Z,1509698995.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:55.959Z,1509698995.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:56.321Z,1509698996.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:56.336Z,1509698996.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:56.719Z,1509698996.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:56.734Z,1509698996.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:57.126Z,1509698997.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:57.161Z,1509698997.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:57.520Z,1509698997.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:57.535Z,1509698997.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:57.974Z,1509698997.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:58.019Z,1509698998.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:58.310Z,1509698998.310 [NAL9602](INFO): Powering up NAL9602
2017-11-03T08:49:58.328Z,1509698998.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:58.343Z,1509698998.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:58.724Z,1509698998.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:58.739Z,1509698998.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:59.127Z,1509698999.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:59.142Z,1509698999.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:59.524Z,1509698999.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:59.538Z,1509698999.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:49:59.927Z,1509698999.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:49:59.942Z,1509698999.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:00.334Z,1509699000.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:00.366Z,1509699000.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:00.729Z,1509699000.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:00.794Z,1509699000.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:01.118Z,1509699001.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:01.179Z,1509699001.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:01.516Z,1509699001.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:01.551Z,1509699001.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:01.923Z,1509699001.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:01.971Z,1509699001.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:02.319Z,1509699002.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:02.350Z,1509699002.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:05.505Z,1509699005.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:05.555Z,1509699005.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:05.732Z,1509699005.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:05.777Z,1509699005.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:06.097Z,1509699006.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:06.154Z,1509699006.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:06.498Z,1509699006.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:06.513Z,1509699006.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:06.891Z,1509699006.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:06.906Z,1509699006.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:07.298Z,1509699007.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:07.319Z,1509699007.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:07.729Z,1509699007.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:07.775Z,1509699007.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:08.096Z,1509699008.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:08.119Z,1509699008.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:08.496Z,1509699008.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:08.519Z,1509699008.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:08.904Z,1509699008.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:08.920Z,1509699008.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:09.274Z,1509699009.274 [NAL9602](INFO): NAL9602 initialized
2017-11-03T08:50:09.303Z,1509699009.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:09.318Z,1509699009.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:09.696Z,1509699009.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:09.772Z,1509699009.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:10.109Z,1509699010.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:10.125Z,1509699010.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:10.507Z,1509699010.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:10.523Z,1509699010.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:10.908Z,1509699010.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:10.923Z,1509699010.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:11.299Z,1509699011.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:11.315Z,1509699011.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:11.698Z,1509699011.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:11.719Z,1509699011.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:12.093Z,1509699012.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:12.114Z,1509699012.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:12.499Z,1509699012.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:12.514Z,1509699012.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:12.908Z,1509699012.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:12.924Z,1509699012.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:13.308Z,1509699013.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:13.323Z,1509699013.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:13.709Z,1509699013.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:13.724Z,1509699013.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:14.099Z,1509699014.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:14.119Z,1509699014.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:14.493Z,1509699014.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:14.513Z,1509699014.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:14.908Z,1509699014.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:14.924Z,1509699014.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:15.308Z,1509699015.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:15.331Z,1509699015.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:15.707Z,1509699015.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:15.723Z,1509699015.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:16.100Z,1509699016.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:16.115Z,1509699016.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:16.493Z,1509699016.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:16.514Z,1509699016.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:16.908Z,1509699016.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:16.924Z,1509699016.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:17.309Z,1509699017.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:17.325Z,1509699017.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:17.740Z,1509699017.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:17.811Z,1509699017.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:18.088Z,1509699018.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:18.144Z,1509699018.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:18.489Z,1509699018.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:18.524Z,1509699018.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:18.891Z,1509699018.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:18.943Z,1509699018.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:19.290Z,1509699019.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:19.325Z,1509699019.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:19.738Z,1509699019.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:19.822Z,1509699019.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:20.101Z,1509699020.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:20.130Z,1509699020.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:20.501Z,1509699020.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:20.567Z,1509699020.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:20.904Z,1509699020.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:20.932Z,1509699020.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:21.291Z,1509699021.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:21.333Z,1509699021.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:21.727Z,1509699021.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:21.776Z,1509699021.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:22.088Z,1509699022.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:22.104Z,1509699022.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:22.487Z,1509699022.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:22.502Z,1509699022.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:22.905Z,1509699022.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:22.935Z,1509699022.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:23.301Z,1509699023.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:23.329Z,1509699023.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:23.727Z,1509699023.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:23.789Z,1509699023.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:24.096Z,1509699024.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:24.127Z,1509699024.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:24.488Z,1509699024.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:24.503Z,1509699024.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:24.905Z,1509699024.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:24.931Z,1509699024.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:25.301Z,1509699025.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:25.333Z,1509699025.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:25.701Z,1509699025.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:25.736Z,1509699025.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:26.103Z,1509699026.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:26.136Z,1509699026.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:26.492Z,1509699026.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:26.507Z,1509699026.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:26.909Z,1509699026.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:26.936Z,1509699026.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:27.301Z,1509699027.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:27.316Z,1509699027.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:27.706Z,1509699027.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:27.737Z,1509699027.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:28.097Z,1509699028.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:28.112Z,1509699028.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:28.491Z,1509699028.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:28.507Z,1509699028.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:28.902Z,1509699028.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:28.918Z,1509699028.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:29.310Z,1509699029.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:29.341Z,1509699029.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:29.710Z,1509699029.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:29.742Z,1509699029.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:30.097Z,1509699030.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:30.113Z,1509699030.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:30.497Z,1509699030.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:30.513Z,1509699030.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:30.902Z,1509699030.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:30.918Z,1509699030.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:31.305Z,1509699031.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:31.321Z,1509699031.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:31.725Z,1509699031.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:31.748Z,1509699031.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:32.092Z,1509699032.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:32.163Z,1509699032.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:32.488Z,1509699032.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:32.547Z,1509699032.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:32.912Z,1509699032.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:32.928Z,1509699032.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:33.313Z,1509699033.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:33.374Z,1509699033.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:33.730Z,1509699033.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:33.747Z,1509699033.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:34.091Z,1509699034.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:34.139Z,1509699034.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:34.495Z,1509699034.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:34.525Z,1509699034.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:34.891Z,1509699034.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:34.942Z,1509699034.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:35.295Z,1509699035.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:35.325Z,1509699035.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:35.729Z,1509699035.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:35.786Z,1509699035.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:36.105Z,1509699036.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:36.135Z,1509699036.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:36.501Z,1509699036.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:36.528Z,1509699036.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:36.901Z,1509699036.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:36.927Z,1509699036.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:37.288Z,1509699037.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:37.302Z,1509699037.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:37.688Z,1509699037.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:37.738Z,1509699037.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:38.092Z,1509699038.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:38.107Z,1509699038.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:38.491Z,1509699038.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:38.506Z,1509699038.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:38.905Z,1509699038.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:38.929Z,1509699038.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:39.309Z,1509699039.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:39.345Z,1509699039.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:39.709Z,1509699039.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:39.742Z,1509699039.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:40.096Z,1509699040.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:40.111Z,1509699040.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:40.496Z,1509699040.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:40.515Z,1509699040.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:40.897Z,1509699040.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:40.912Z,1509699040.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:41.309Z,1509699041.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:41.341Z,1509699041.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:41.709Z,1509699041.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:41.741Z,1509699041.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:42.096Z,1509699042.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:42.114Z,1509699042.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:42.494Z,1509699042.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:42.509Z,1509699042.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:42.909Z,1509699042.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:42.941Z,1509699042.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:43.301Z,1509699043.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:43.323Z,1509699043.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:43.712Z,1509699043.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:43.744Z,1509699043.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:44.098Z,1509699044.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:44.119Z,1509699044.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:44.494Z,1509699044.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:44.515Z,1509699044.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:44.902Z,1509699044.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:44.918Z,1509699044.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:45.305Z,1509699045.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:45.321Z,1509699045.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:45.749Z,1509699045.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:45.768Z,1509699045.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:46.096Z,1509699046.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:46.111Z,1509699046.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:46.496Z,1509699046.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:46.562Z,1509699046.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:46.898Z,1509699046.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:46.931Z,1509699046.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:47.298Z,1509699047.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:47.313Z,1509699047.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:47.723Z,1509699047.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:47.779Z,1509699047.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:48.108Z,1509699048.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:48.124Z,1509699048.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:48.512Z,1509699048.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:48.563Z,1509699048.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:48.908Z,1509699048.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:48.966Z,1509699048.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:49.297Z,1509699049.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:49.319Z,1509699049.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:49.732Z,1509699049.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:49.779Z,1509699049.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:50.097Z,1509699050.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:50.112Z,1509699050.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:50.488Z,1509699050.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:50.513Z,1509699050.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:50.909Z,1509699050.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:50.925Z,1509699050.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:51.311Z,1509699051.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:51.327Z,1509699051.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:51.721Z,1509699051.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:51.777Z,1509699051.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:52.090Z,1509699052.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:52.116Z,1509699052.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:52.491Z,1509699052.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:52.516Z,1509699052.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:52.909Z,1509699052.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:52.924Z,1509699052.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:53.313Z,1509699053.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:53.335Z,1509699053.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:53.709Z,1509699053.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:53.725Z,1509699053.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:54.108Z,1509699054.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:54.123Z,1509699054.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:54.487Z,1509699054.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:54.514Z,1509699054.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:54.910Z,1509699054.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:54.925Z,1509699054.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:55.309Z,1509699055.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:55.325Z,1509699055.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:55.706Z,1509699055.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:55.721Z,1509699055.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:56.084Z,1509699056.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:56.114Z,1509699056.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:56.115Z,1509699056.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 172
2017-11-03T08:50:56.115Z,1509699056.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:50:56.117Z,1509699056.117 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:56.117Z,1509699056.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 172
2017-11-03T08:50:56.117Z,1509699056.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:50:56.119Z,1509699056.119 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:56.119Z,1509699056.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 172
2017-11-03T08:50:56.119Z,1509699056.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:50:56.224Z,1509699056.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:50:56.224Z,1509699056.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:50:56.225Z,1509699056.225 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:50:56.499Z,1509699056.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:56.620Z,1509699056.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:50:56.620Z,1509699056.620 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 172
2017-11-03T08:50:56.621Z,1509699056.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:50:56.621Z,1509699056.621 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 172
2017-11-03T08:50:56.621Z,1509699056.621 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:50:56.622Z,1509699056.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 172
2017-11-03T08:50:56.906Z,1509699056.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:56.930Z,1509699056.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:50:56.931Z,1509699056.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:50:56.931Z,1509699056.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:50:56.931Z,1509699056.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:50:56.932Z,1509699056.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:50:56.932Z,1509699056.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:50:56.933Z,1509699056.933 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:50:56.933Z,1509699056.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:50:56.933Z,1509699056.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:50:57.310Z,1509699057.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:57.385Z,1509699057.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:57.705Z,1509699057.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:57.740Z,1509699057.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:58.093Z,1509699058.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:58.108Z,1509699058.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:58.496Z,1509699058.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:58.511Z,1509699058.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:58.912Z,1509699058.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:58.943Z,1509699058.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:59.309Z,1509699059.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:59.325Z,1509699059.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:50:59.785Z,1509699059.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:50:59.818Z,1509699059.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:00.099Z,1509699060.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:00.147Z,1509699060.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:00.498Z,1509699060.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:00.543Z,1509699060.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:00.915Z,1509699060.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:01.011Z,1509699061.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:01.031Z,1509699061.031 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T08:51:01.031Z,1509699061.031 [Default:CheckIn:C.Wait] Stopped
2017-11-03T08:51:01.031Z,1509699061.031 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T08:51:01.031Z,1509699061.031 [Default:CheckIn:D] Running Loop=1
2017-11-03T08:51:01.308Z,1509699061.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:01.398Z,1509699061.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:01.401Z,1509699061.401 [Default:CheckIn:D] Stopped
2017-11-03T08:51:01.402Z,1509699061.402 [Default:CheckIn:E] Running Loop=1
2017-11-03T08:51:01.721Z,1509699061.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:01.754Z,1509699061.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:01.762Z,1509699061.762 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 515.897266 min 
2017-11-03T08:51:01.762Z,1509699061.762 [Default:CheckIn:E] Stopped
2017-11-03T08:51:01.762Z,1509699061.762 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T08:51:01.762Z,1509699061.762 [Default:CheckIn] Stopped
2017-11-03T08:51:01.763Z,1509699061.763 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T08:51:01.763Z,1509699061.763 [Default:CheckIn](INFO): Running loop #51
2017-11-03T08:51:01.763Z,1509699061.763 [Default:CheckIn] Running Loop=51
2017-11-03T08:51:01.763Z,1509699061.763 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T08:51:01.763Z,1509699061.763 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T08:51:02.112Z,1509699062.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:02.159Z,1509699062.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:02.501Z,1509699062.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:02.607Z,1509699062.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:08.289Z,1509699068.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:08.342Z,1509699068.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:08.489Z,1509699068.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:08.528Z,1509699068.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:08.890Z,1509699068.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:08.936Z,1509699068.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:09.295Z,1509699069.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:09.343Z,1509699069.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:09.689Z,1509699069.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:09.737Z,1509699069.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:10.100Z,1509699070.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:10.142Z,1509699070.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:10.506Z,1509699070.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:10.552Z,1509699070.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:10.905Z,1509699070.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:10.953Z,1509699070.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:11.311Z,1509699071.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:11.340Z,1509699071.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:11.698Z,1509699071.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:11.730Z,1509699071.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:12.090Z,1509699072.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:12.123Z,1509699072.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:12.488Z,1509699072.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:12.559Z,1509699072.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:12.912Z,1509699072.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:12.941Z,1509699072.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:13.311Z,1509699073.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:13.336Z,1509699073.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:13.726Z,1509699073.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:13.800Z,1509699073.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:14.092Z,1509699074.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:14.127Z,1509699074.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:14.509Z,1509699074.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:14.557Z,1509699074.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:14.905Z,1509699074.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:14.951Z,1509699074.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:15.306Z,1509699075.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:15.331Z,1509699075.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:15.714Z,1509699075.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:15.752Z,1509699075.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:16.090Z,1509699076.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:16.135Z,1509699076.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:16.497Z,1509699076.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:16.541Z,1509699076.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:16.908Z,1509699076.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:16.940Z,1509699076.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:17.311Z,1509699077.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:17.334Z,1509699077.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:17.745Z,1509699077.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:17.789Z,1509699077.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:18.097Z,1509699078.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:18.141Z,1509699078.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:18.496Z,1509699078.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:18.559Z,1509699078.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:18.903Z,1509699078.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:18.939Z,1509699078.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:19.301Z,1509699079.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:19.317Z,1509699079.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:19.732Z,1509699079.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:19.796Z,1509699079.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:20.097Z,1509699080.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:20.112Z,1509699080.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:20.496Z,1509699080.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:20.574Z,1509699080.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:20.904Z,1509699080.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:20.919Z,1509699080.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:21.305Z,1509699081.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:21.321Z,1509699081.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:21.704Z,1509699081.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:21.751Z,1509699081.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:22.095Z,1509699082.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:22.110Z,1509699082.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:22.497Z,1509699082.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:22.551Z,1509699082.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:22.904Z,1509699082.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:22.951Z,1509699082.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:23.304Z,1509699083.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:23.323Z,1509699083.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:23.705Z,1509699083.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:23.721Z,1509699083.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:24.100Z,1509699084.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:24.115Z,1509699084.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:24.499Z,1509699084.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:24.514Z,1509699084.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:24.904Z,1509699084.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:24.921Z,1509699084.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:25.305Z,1509699085.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:25.321Z,1509699085.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:25.703Z,1509699085.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:25.723Z,1509699085.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:26.098Z,1509699086.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:26.113Z,1509699086.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:26.494Z,1509699086.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:26.509Z,1509699086.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:26.903Z,1509699086.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:26.923Z,1509699086.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:27.306Z,1509699087.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:27.321Z,1509699087.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:27.742Z,1509699087.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:27.773Z,1509699087.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:28.096Z,1509699088.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:28.111Z,1509699088.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:28.500Z,1509699088.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:28.515Z,1509699088.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:28.898Z,1509699088.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:28.919Z,1509699088.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:29.299Z,1509699089.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:29.314Z,1509699089.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:29.748Z,1509699089.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:29.774Z,1509699089.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:30.104Z,1509699090.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:30.120Z,1509699090.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:30.504Z,1509699090.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:30.523Z,1509699090.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:30.905Z,1509699090.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:30.921Z,1509699090.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:31.299Z,1509699091.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:31.315Z,1509699091.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:31.728Z,1509699091.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:31.760Z,1509699091.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:32.099Z,1509699092.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:32.119Z,1509699092.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:32.499Z,1509699092.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:32.515Z,1509699092.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:32.904Z,1509699092.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:32.923Z,1509699092.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:33.305Z,1509699093.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:33.321Z,1509699093.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:33.711Z,1509699093.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:33.773Z,1509699093.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:34.100Z,1509699094.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:34.115Z,1509699094.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:34.495Z,1509699094.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:34.514Z,1509699094.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:34.908Z,1509699094.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:34.987Z,1509699094.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:35.308Z,1509699095.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:35.330Z,1509699095.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:35.706Z,1509699095.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:35.816Z,1509699095.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:36.093Z,1509699096.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:36.115Z,1509699096.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:36.497Z,1509699096.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:36.551Z,1509699096.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:36.909Z,1509699096.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:36.959Z,1509699096.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:37.308Z,1509699097.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:37.323Z,1509699097.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:37.710Z,1509699097.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:37.726Z,1509699097.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:38.099Z,1509699098.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:38.115Z,1509699098.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:38.490Z,1509699098.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:38.513Z,1509699098.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:38.910Z,1509699098.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:38.931Z,1509699098.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:39.309Z,1509699099.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:39.325Z,1509699099.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:39.708Z,1509699099.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:39.725Z,1509699099.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:40.101Z,1509699100.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:40.116Z,1509699100.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:40.494Z,1509699100.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:40.514Z,1509699100.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:40.909Z,1509699100.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:40.925Z,1509699100.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:41.306Z,1509699101.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:41.334Z,1509699101.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:41.750Z,1509699101.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:41.771Z,1509699101.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:42.096Z,1509699102.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:42.112Z,1509699102.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:42.497Z,1509699102.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:42.578Z,1509699102.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:42.899Z,1509699102.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:42.915Z,1509699102.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:43.288Z,1509699103.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:43.314Z,1509699103.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:43.761Z,1509699103.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:43.777Z,1509699103.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:44.109Z,1509699104.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:44.127Z,1509699104.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:44.508Z,1509699104.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:44.525Z,1509699104.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:44.909Z,1509699104.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:44.932Z,1509699104.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:45.285Z,1509699105.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:45.312Z,1509699105.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:45.727Z,1509699105.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:45.763Z,1509699105.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:46.098Z,1509699106.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:46.113Z,1509699106.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:46.500Z,1509699106.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:46.659Z,1509699106.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:46.909Z,1509699106.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:46.925Z,1509699106.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:47.309Z,1509699107.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:47.324Z,1509699107.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:47.715Z,1509699107.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:47.774Z,1509699107.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:48.090Z,1509699108.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:48.117Z,1509699108.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:48.492Z,1509699108.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:48.519Z,1509699108.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:48.914Z,1509699108.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:48.979Z,1509699108.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:49.310Z,1509699109.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:49.382Z,1509699109.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:49.710Z,1509699109.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:49.726Z,1509699109.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:50.125Z,1509699110.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:50.141Z,1509699110.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:50.491Z,1509699110.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:50.563Z,1509699110.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:50.909Z,1509699110.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:50.936Z,1509699110.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:51.310Z,1509699111.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:51.370Z,1509699111.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:51.709Z,1509699111.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:51.726Z,1509699111.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:52.089Z,1509699112.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:52.147Z,1509699112.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:52.483Z,1509699112.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:52.514Z,1509699112.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:52.909Z,1509699112.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:52.925Z,1509699112.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:53.309Z,1509699113.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:53.325Z,1509699113.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:53.726Z,1509699113.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:53.742Z,1509699113.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:54.090Z,1509699114.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:54.125Z,1509699114.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:54.499Z,1509699114.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:54.525Z,1509699114.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:54.914Z,1509699114.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:54.930Z,1509699114.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:55.301Z,1509699115.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:55.335Z,1509699115.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:55.726Z,1509699115.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:55.776Z,1509699115.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:56.091Z,1509699116.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:56.126Z,1509699116.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:56.488Z,1509699116.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:56.503Z,1509699116.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:56.601Z,1509699116.601 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T08:51:56.901Z,1509699116.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:56.928Z,1509699116.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:57.305Z,1509699117.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:57.333Z,1509699117.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:57.730Z,1509699117.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:57.778Z,1509699117.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:58.093Z,1509699118.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:58.108Z,1509699118.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:58.491Z,1509699118.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:58.506Z,1509699118.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:58.905Z,1509699118.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:58.937Z,1509699118.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:59.301Z,1509699119.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:59.316Z,1509699119.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:51:59.740Z,1509699119.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:51:59.792Z,1509699119.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:00.096Z,1509699120.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:00.112Z,1509699120.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:00.496Z,1509699120.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:00.511Z,1509699120.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:00.900Z,1509699120.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:00.915Z,1509699120.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:01.298Z,1509699121.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:01.313Z,1509699121.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:01.696Z,1509699121.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:01.773Z,1509699121.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:02.109Z,1509699122.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:02.125Z,1509699122.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:02.508Z,1509699122.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:02.524Z,1509699122.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:02.908Z,1509699122.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:02.931Z,1509699122.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:06.306Z,1509699126.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:06.371Z,1509699126.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:06.484Z,1509699126.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:06.514Z,1509699126.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:06.905Z,1509699126.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:06.921Z,1509699126.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:07.309Z,1509699127.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:07.318Z,1509699127.318 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:52:07.318Z,1509699127.318 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:52:07.318Z,1509699127.318 [BPC1](ERROR): Communications Fault
2017-11-03T08:52:07.326Z,1509699127.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:07.445Z,1509699127.445 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:52:07.705Z,1509699127.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:07.720Z,1509699127.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:08.095Z,1509699128.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:08.109Z,1509699128.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:08.483Z,1509699128.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:08.509Z,1509699128.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:08.601Z,1509699128.601 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:52:08.601Z,1509699128.601 [BPC1] No Fault, FailCount= 1
2017-11-03T08:52:08.905Z,1509699128.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:08.971Z,1509699128.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:09.308Z,1509699129.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:09.330Z,1509699129.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:09.722Z,1509699129.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:09.762Z,1509699129.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:10.091Z,1509699130.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:10.126Z,1509699130.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:10.484Z,1509699130.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:10.499Z,1509699130.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:10.906Z,1509699130.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:10.969Z,1509699130.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:11.297Z,1509699131.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:11.333Z,1509699131.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:11.727Z,1509699131.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:11.751Z,1509699131.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:12.090Z,1509699132.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:12.105Z,1509699132.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:12.489Z,1509699132.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:12.504Z,1509699132.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:12.901Z,1509699132.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:12.932Z,1509699132.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:13.302Z,1509699133.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:13.329Z,1509699133.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:13.754Z,1509699133.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:13.793Z,1509699133.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:14.089Z,1509699134.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:14.111Z,1509699134.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:14.492Z,1509699134.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:14.509Z,1509699134.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:14.888Z,1509699134.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:14.904Z,1509699134.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:15.289Z,1509699135.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:15.304Z,1509699135.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:15.775Z,1509699135.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:15.800Z,1509699135.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:16.101Z,1509699136.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:16.133Z,1509699136.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:16.497Z,1509699136.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:16.513Z,1509699136.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:16.906Z,1509699136.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:16.937Z,1509699136.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:17.293Z,1509699137.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:17.308Z,1509699137.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:17.694Z,1509699137.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:17.709Z,1509699137.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:18.092Z,1509699138.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:18.108Z,1509699138.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:18.493Z,1509699138.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:18.515Z,1509699138.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:18.898Z,1509699138.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:18.913Z,1509699138.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:19.298Z,1509699139.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:19.314Z,1509699139.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:19.698Z,1509699139.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:19.713Z,1509699139.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:20.093Z,1509699140.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:20.108Z,1509699140.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:20.491Z,1509699140.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:20.506Z,1509699140.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:20.898Z,1509699140.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:20.913Z,1509699140.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:21.302Z,1509699141.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:21.317Z,1509699141.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:21.701Z,1509699141.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:21.717Z,1509699141.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:22.093Z,1509699142.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:22.154Z,1509699142.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:22.483Z,1509699142.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:22.514Z,1509699142.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:22.907Z,1509699142.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:22.923Z,1509699142.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:23.305Z,1509699143.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:23.355Z,1509699143.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:23.746Z,1509699143.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:23.768Z,1509699143.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:24.082Z,1509699144.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:24.150Z,1509699144.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:24.493Z,1509699144.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:24.547Z,1509699144.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:24.906Z,1509699144.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:24.923Z,1509699144.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:25.309Z,1509699145.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:25.324Z,1509699145.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:25.721Z,1509699145.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:25.759Z,1509699145.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:26.094Z,1509699146.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:26.110Z,1509699146.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:26.483Z,1509699146.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:26.510Z,1509699146.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:26.905Z,1509699146.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:26.921Z,1509699146.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:27.308Z,1509699147.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:27.323Z,1509699147.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:27.744Z,1509699147.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:27.766Z,1509699147.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:28.094Z,1509699148.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:28.111Z,1509699148.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:28.492Z,1509699148.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:28.515Z,1509699148.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:28.895Z,1509699148.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:28.911Z,1509699148.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:29.293Z,1509699149.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:29.309Z,1509699149.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:29.695Z,1509699149.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:29.799Z,1509699149.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:30.108Z,1509699150.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:30.125Z,1509699150.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:30.505Z,1509699150.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:30.521Z,1509699150.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:30.904Z,1509699150.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:30.923Z,1509699150.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:31.295Z,1509699151.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:31.311Z,1509699151.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:31.695Z,1509699151.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:31.715Z,1509699151.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:32.083Z,1509699152.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:32.109Z,1509699152.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:32.496Z,1509699152.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:32.511Z,1509699152.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:32.905Z,1509699152.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:32.923Z,1509699152.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:33.305Z,1509699153.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:33.321Z,1509699153.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:33.709Z,1509699153.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:33.725Z,1509699153.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:34.093Z,1509699154.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:34.109Z,1509699154.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:34.502Z,1509699154.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:34.523Z,1509699154.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:34.906Z,1509699154.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:34.922Z,1509699154.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:35.308Z,1509699155.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:35.370Z,1509699155.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:35.705Z,1509699155.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:35.723Z,1509699155.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:36.081Z,1509699156.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:36.108Z,1509699156.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:36.503Z,1509699156.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:36.570Z,1509699156.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:36.905Z,1509699156.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:36.921Z,1509699156.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:37.308Z,1509699157.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:37.355Z,1509699157.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:37.719Z,1509699157.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:37.760Z,1509699157.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:38.093Z,1509699158.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:38.147Z,1509699158.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:38.495Z,1509699158.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:38.554Z,1509699158.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:38.905Z,1509699158.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:38.921Z,1509699158.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:39.307Z,1509699159.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:39.323Z,1509699159.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:39.773Z,1509699159.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:39.821Z,1509699159.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:40.092Z,1509699160.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:40.115Z,1509699160.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:40.494Z,1509699160.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:40.515Z,1509699160.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:40.895Z,1509699160.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:40.911Z,1509699160.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:41.295Z,1509699161.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:41.315Z,1509699161.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:41.740Z,1509699161.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:41.767Z,1509699161.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:42.099Z,1509699162.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:42.127Z,1509699162.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:42.508Z,1509699162.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:42.524Z,1509699162.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:42.906Z,1509699162.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:42.921Z,1509699162.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:43.280Z,1509699163.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:43.312Z,1509699163.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:43.687Z,1509699163.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:43.772Z,1509699163.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:44.092Z,1509699164.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:44.107Z,1509699164.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:44.484Z,1509699164.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:44.499Z,1509699164.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:44.905Z,1509699164.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:44.935Z,1509699164.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:45.301Z,1509699165.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:45.327Z,1509699165.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:45.696Z,1509699165.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:45.728Z,1509699165.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:46.100Z,1509699166.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:46.133Z,1509699166.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:46.488Z,1509699166.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:46.503Z,1509699166.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:46.905Z,1509699166.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:46.931Z,1509699166.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:47.306Z,1509699167.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:47.331Z,1509699167.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:47.706Z,1509699167.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:47.727Z,1509699167.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:48.092Z,1509699168.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:48.107Z,1509699168.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:48.487Z,1509699168.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:48.503Z,1509699168.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:48.901Z,1509699168.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:48.978Z,1509699168.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:49.297Z,1509699169.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:49.334Z,1509699169.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:49.706Z,1509699169.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:49.730Z,1509699169.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:50.089Z,1509699170.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:50.104Z,1509699170.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:50.495Z,1509699170.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:50.510Z,1509699170.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:50.902Z,1509699170.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:50.933Z,1509699170.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:51.302Z,1509699171.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:51.332Z,1509699171.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:51.746Z,1509699171.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:51.784Z,1509699171.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:52.092Z,1509699172.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:52.108Z,1509699172.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:52.492Z,1509699172.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:52.508Z,1509699172.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:52.893Z,1509699172.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:52.909Z,1509699172.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:53.293Z,1509699173.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:53.309Z,1509699173.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:53.743Z,1509699173.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:53.755Z,1509699173.755 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:52:53.755Z,1509699173.755 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:52:53.756Z,1509699173.756 [BPC1](ERROR): Communications Fault
2017-11-03T08:52:53.810Z,1509699173.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:53.909Z,1509699173.909 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:52:54.101Z,1509699174.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:54.118Z,1509699174.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:54.501Z,1509699174.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:54.517Z,1509699174.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:54.898Z,1509699174.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:54.919Z,1509699174.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:55.016Z,1509699175.016 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:52:55.017Z,1509699175.017 [BPC1] No Fault, FailCount= 1
2017-11-03T08:52:55.295Z,1509699175.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:55.363Z,1509699175.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:55.732Z,1509699175.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:55.752Z,1509699175.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:56.094Z,1509699176.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:56.109Z,1509699176.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:56.494Z,1509699176.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:56.510Z,1509699176.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:56.900Z,1509699176.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:56.916Z,1509699176.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:57.300Z,1509699177.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:57.323Z,1509699177.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:57.721Z,1509699177.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:57.793Z,1509699177.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:58.093Z,1509699178.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:58.109Z,1509699178.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:58.493Z,1509699178.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:58.508Z,1509699178.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:58.902Z,1509699178.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:58.918Z,1509699178.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:59.301Z,1509699179.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:59.317Z,1509699179.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:52:59.700Z,1509699179.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:52:59.750Z,1509699179.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:00.092Z,1509699180.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:00.108Z,1509699180.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:00.488Z,1509699180.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:00.507Z,1509699180.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:00.897Z,1509699180.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:00.919Z,1509699180.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:01.314Z,1509699181.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:01.339Z,1509699181.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:01.697Z,1509699181.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:01.729Z,1509699181.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:02.092Z,1509699182.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:02.123Z,1509699182.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:02.489Z,1509699182.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:02.504Z,1509699182.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:02.898Z,1509699182.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:02.929Z,1509699182.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:03.298Z,1509699183.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:03.329Z,1509699183.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:06.602Z,1509699186.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:06.626Z,1509699186.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:06.771Z,1509699186.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:06.805Z,1509699186.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:07.170Z,1509699187.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:07.186Z,1509699187.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:07.572Z,1509699187.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:07.587Z,1509699187.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:07.978Z,1509699187.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:07.998Z,1509699187.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:08.385Z,1509699188.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:08.400Z,1509699188.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:08.786Z,1509699188.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:08.806Z,1509699188.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:09.163Z,1509699189.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:09.189Z,1509699189.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:09.560Z,1509699189.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:09.586Z,1509699189.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:09.964Z,1509699189.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:10.026Z,1509699190.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:10.368Z,1509699190.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:10.383Z,1509699190.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:10.763Z,1509699190.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:10.838Z,1509699190.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:11.177Z,1509699191.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:11.208Z,1509699191.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:11.577Z,1509699191.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:11.623Z,1509699191.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:11.981Z,1509699191.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:12.010Z,1509699192.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:12.364Z,1509699192.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:12.411Z,1509699192.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:12.764Z,1509699192.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:12.779Z,1509699192.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:13.165Z,1509699193.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:13.180Z,1509699193.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:13.564Z,1509699193.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:13.579Z,1509699193.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:14.015Z,1509699194.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:14.035Z,1509699194.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:14.378Z,1509699194.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:14.409Z,1509699194.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:14.769Z,1509699194.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:14.785Z,1509699194.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:15.168Z,1509699195.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:15.184Z,1509699195.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:15.566Z,1509699195.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:15.581Z,1509699195.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:15.966Z,1509699195.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:15.982Z,1509699195.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:16.370Z,1509699196.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:16.385Z,1509699196.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:16.765Z,1509699196.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:16.780Z,1509699196.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:17.170Z,1509699197.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:17.185Z,1509699197.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:17.581Z,1509699197.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:17.606Z,1509699197.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:17.978Z,1509699197.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:18.014Z,1509699198.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:18.368Z,1509699198.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:18.384Z,1509699198.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:18.765Z,1509699198.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:18.781Z,1509699198.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:19.165Z,1509699199.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:19.181Z,1509699199.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:19.569Z,1509699199.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:19.585Z,1509699199.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:19.978Z,1509699199.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:20.009Z,1509699200.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:20.386Z,1509699200.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:20.407Z,1509699200.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:20.786Z,1509699200.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:20.802Z,1509699200.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:21.163Z,1509699201.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:21.189Z,1509699201.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:21.563Z,1509699201.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:21.608Z,1509699201.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:21.960Z,1509699201.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:21.976Z,1509699201.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:22.360Z,1509699202.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:22.375Z,1509699202.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:22.764Z,1509699202.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:22.826Z,1509699202.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:23.169Z,1509699203.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:23.230Z,1509699203.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:23.569Z,1509699203.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:23.585Z,1509699203.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:23.969Z,1509699203.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:23.985Z,1509699203.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:24.367Z,1509699204.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:24.417Z,1509699204.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:24.768Z,1509699204.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:24.783Z,1509699204.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:25.168Z,1509699205.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:25.218Z,1509699205.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:25.568Z,1509699205.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:25.623Z,1509699205.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:25.974Z,1509699205.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:25.989Z,1509699205.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:26.406Z,1509699206.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:26.426Z,1509699206.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:26.777Z,1509699206.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:26.818Z,1509699206.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:27.171Z,1509699207.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:27.191Z,1509699207.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:27.568Z,1509699207.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:27.591Z,1509699207.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:27.978Z,1509699207.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:28.030Z,1509699208.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:28.372Z,1509699208.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:28.387Z,1509699208.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:28.770Z,1509699208.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:28.786Z,1509699208.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:29.177Z,1509699209.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:29.192Z,1509699209.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:29.576Z,1509699209.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:29.592Z,1509699209.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:29.978Z,1509699209.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:29.993Z,1509699209.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:30.368Z,1509699210.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:30.383Z,1509699210.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:30.771Z,1509699210.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:30.791Z,1509699210.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:31.171Z,1509699211.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:31.187Z,1509699211.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:31.565Z,1509699211.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:31.581Z,1509699211.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:31.976Z,1509699211.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:31.992Z,1509699211.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:32.376Z,1509699212.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:32.392Z,1509699212.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:32.777Z,1509699212.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:32.795Z,1509699212.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:33.170Z,1509699213.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:33.191Z,1509699213.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:33.570Z,1509699213.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:33.591Z,1509699213.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:33.959Z,1509699213.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:33.994Z,1509699213.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:34.361Z,1509699214.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:34.387Z,1509699214.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:34.760Z,1509699214.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:34.786Z,1509699214.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:35.186Z,1509699215.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:35.201Z,1509699215.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:35.584Z,1509699215.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:35.631Z,1509699215.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:35.981Z,1509699215.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:36.002Z,1509699216.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:36.363Z,1509699216.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:36.455Z,1509699216.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:36.763Z,1509699216.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:36.789Z,1509699216.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:37.161Z,1509699217.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:37.219Z,1509699217.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:37.563Z,1509699217.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:37.589Z,1509699217.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:37.989Z,1509699217.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:38.047Z,1509699218.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:38.385Z,1509699218.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:38.439Z,1509699218.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:38.770Z,1509699218.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:38.796Z,1509699218.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:39.163Z,1509699219.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:39.196Z,1509699219.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:39.560Z,1509699219.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:39.594Z,1509699219.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:39.971Z,1509699219.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:39.998Z,1509699219.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:40.357Z,1509699220.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:40.389Z,1509699220.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:40.760Z,1509699220.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:40.775Z,1509699220.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:41.173Z,1509699221.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:41.201Z,1509699221.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:41.569Z,1509699221.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:41.604Z,1509699221.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:41.999Z,1509699221.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:42.034Z,1509699222.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:42.367Z,1509699222.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:42.418Z,1509699222.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:42.764Z,1509699222.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:42.814Z,1509699222.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:43.168Z,1509699223.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:43.191Z,1509699223.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:43.567Z,1509699223.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:43.583Z,1509699223.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:43.982Z,1509699223.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:44.018Z,1509699224.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:44.373Z,1509699224.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:44.389Z,1509699224.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:44.782Z,1509699224.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:44.817Z,1509699224.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:45.170Z,1509699225.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:45.185Z,1509699225.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:45.570Z,1509699225.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:45.585Z,1509699225.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:45.970Z,1509699225.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:45.986Z,1509699225.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:46.376Z,1509699226.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:46.395Z,1509699226.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:46.768Z,1509699226.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:46.783Z,1509699226.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:47.177Z,1509699227.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:47.194Z,1509699227.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:47.577Z,1509699227.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:47.593Z,1509699227.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:47.980Z,1509699227.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:48.003Z,1509699228.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:48.369Z,1509699228.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:48.385Z,1509699228.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:48.771Z,1509699228.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:48.858Z,1509699228.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:49.164Z,1509699229.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:49.189Z,1509699229.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:49.563Z,1509699229.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:49.682Z,1509699229.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:49.980Z,1509699229.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:49.996Z,1509699229.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:50.381Z,1509699230.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:50.427Z,1509699230.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:50.773Z,1509699230.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:50.799Z,1509699230.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:51.161Z,1509699231.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:51.218Z,1509699231.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:51.560Z,1509699231.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:51.616Z,1509699231.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:51.964Z,1509699231.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:51.979Z,1509699231.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:52.366Z,1509699232.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:52.381Z,1509699232.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:52.764Z,1509699232.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:52.780Z,1509699232.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:53.177Z,1509699233.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:53.209Z,1509699233.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:53.581Z,1509699233.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:53.619Z,1509699233.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:53.970Z,1509699233.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:53.985Z,1509699233.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:54.369Z,1509699234.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:54.384Z,1509699234.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:54.767Z,1509699234.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:54.782Z,1509699234.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:55.171Z,1509699235.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:55.186Z,1509699235.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:55.566Z,1509699235.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:55.582Z,1509699235.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:55.980Z,1509699235.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:56.027Z,1509699236.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:56.380Z,1509699236.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:56.399Z,1509699236.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:56.778Z,1509699236.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:56.796Z,1509699236.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:57.165Z,1509699237.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:57.187Z,1509699237.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:57.187Z,1509699237.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 173
2017-11-03T08:53:57.187Z,1509699237.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:53:57.189Z,1509699237.189 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:57.189Z,1509699237.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 173
2017-11-03T08:53:57.189Z,1509699237.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:53:57.191Z,1509699237.191 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:57.191Z,1509699237.191 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 173
2017-11-03T08:53:57.191Z,1509699237.191 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:53:57.273Z,1509699237.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:53:57.273Z,1509699237.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:53:57.273Z,1509699237.273 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:53:57.562Z,1509699237.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:57.668Z,1509699237.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:53:57.669Z,1509699237.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 173
2017-11-03T08:53:57.669Z,1509699237.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:53:57.669Z,1509699237.669 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 173
2017-11-03T08:53:57.670Z,1509699237.670 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:53:57.670Z,1509699237.670 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 173
2017-11-03T08:53:57.972Z,1509699237.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:57.987Z,1509699237.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:53:57.987Z,1509699237.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:53:57.988Z,1509699237.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:53:57.988Z,1509699237.988 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:53:57.989Z,1509699237.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:53:57.989Z,1509699237.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:53:57.989Z,1509699237.989 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:53:57.990Z,1509699237.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:53:57.990Z,1509699237.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:53:58.359Z,1509699238.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:58.386Z,1509699238.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:58.763Z,1509699238.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:58.790Z,1509699238.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:59.185Z,1509699239.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:59.207Z,1509699239.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:59.585Z,1509699239.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:53:59.602Z,1509699239.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:53:59.981Z,1509699239.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:00.006Z,1509699240.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:00.380Z,1509699240.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:00.395Z,1509699240.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:00.763Z,1509699240.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:00.789Z,1509699240.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:01.163Z,1509699241.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:01.188Z,1509699241.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:01.563Z,1509699241.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:01.590Z,1509699241.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:01.977Z,1509699241.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:02.000Z,1509699242.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:02.381Z,1509699242.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:02.449Z,1509699242.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:02.773Z,1509699242.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:02.843Z,1509699242.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:03.167Z,1509699243.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:03.199Z,1509699243.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:03.559Z,1509699243.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:03.607Z,1509699243.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:06.759Z,1509699246.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:06.774Z,1509699246.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:06.913Z,1509699246.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:06.966Z,1509699246.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:07.316Z,1509699247.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:07.363Z,1509699247.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:07.752Z,1509699247.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:07.795Z,1509699247.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:08.114Z,1509699248.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:08.146Z,1509699248.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:08.501Z,1509699248.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:08.517Z,1509699248.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:08.900Z,1509699248.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:08.916Z,1509699248.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:09.301Z,1509699249.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:09.317Z,1509699249.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:09.699Z,1509699249.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:09.715Z,1509699249.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:10.123Z,1509699250.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:10.148Z,1509699250.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:10.514Z,1509699250.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:10.545Z,1509699250.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:10.913Z,1509699250.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:10.946Z,1509699250.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:11.307Z,1509699251.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:11.324Z,1509699251.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:11.707Z,1509699251.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:11.723Z,1509699251.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:12.104Z,1509699252.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:12.120Z,1509699252.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:12.511Z,1509699252.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:12.527Z,1509699252.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:12.918Z,1509699252.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:12.949Z,1509699252.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:13.318Z,1509699253.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:13.349Z,1509699253.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:13.721Z,1509699253.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:13.747Z,1509699253.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:14.108Z,1509699254.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:14.150Z,1509699254.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:14.502Z,1509699254.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:14.529Z,1509699254.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:14.922Z,1509699254.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:14.937Z,1509699254.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:15.323Z,1509699255.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:15.338Z,1509699255.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:15.737Z,1509699255.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:15.770Z,1509699255.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:16.112Z,1509699256.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:16.129Z,1509699256.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:16.508Z,1509699256.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:16.535Z,1509699256.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:16.908Z,1509699256.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:16.935Z,1509699256.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:17.312Z,1509699257.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:17.335Z,1509699257.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:17.733Z,1509699257.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:17.843Z,1509699257.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:18.122Z,1509699258.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:18.137Z,1509699258.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:18.521Z,1509699258.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:18.537Z,1509699258.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:18.922Z,1509699258.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:18.978Z,1509699258.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:19.300Z,1509699259.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:19.327Z,1509699259.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:19.738Z,1509699259.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:19.797Z,1509699259.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:20.101Z,1509699260.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:20.171Z,1509699260.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:20.499Z,1509699260.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:20.526Z,1509699260.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:20.922Z,1509699260.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:20.938Z,1509699260.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:21.325Z,1509699261.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:21.341Z,1509699261.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:21.736Z,1509699261.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:21.779Z,1509699261.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:22.101Z,1509699262.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:22.128Z,1509699262.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:22.501Z,1509699262.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:22.519Z,1509699262.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:22.919Z,1509699262.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:22.943Z,1509699262.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:23.314Z,1509699263.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:23.342Z,1509699263.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:23.714Z,1509699263.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:23.745Z,1509699263.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:24.104Z,1509699264.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:24.121Z,1509699264.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:24.500Z,1509699264.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:24.515Z,1509699264.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:24.913Z,1509699264.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:24.945Z,1509699264.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:25.313Z,1509699265.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:25.343Z,1509699265.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:25.713Z,1509699265.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:25.745Z,1509699265.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:26.104Z,1509699266.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:26.120Z,1509699266.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:26.503Z,1509699266.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:26.519Z,1509699266.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:26.918Z,1509699266.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:26.950Z,1509699266.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:27.322Z,1509699267.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:27.354Z,1509699267.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:27.713Z,1509699267.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:27.735Z,1509699267.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:28.110Z,1509699268.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:28.126Z,1509699268.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:28.507Z,1509699268.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:28.523Z,1509699268.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:28.909Z,1509699268.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:28.931Z,1509699268.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:29.313Z,1509699269.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:29.335Z,1509699269.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:29.757Z,1509699269.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:29.774Z,1509699269.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:30.108Z,1509699270.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:30.131Z,1509699270.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:30.509Z,1509699270.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:30.531Z,1509699270.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:30.910Z,1509699270.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:30.974Z,1509699270.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:31.309Z,1509699271.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:31.318Z,1509699271.318 [BPC1](ERROR): Failed to parse message.
2017-11-03T08:54:31.318Z,1509699271.318 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T08:54:31.318Z,1509699271.318 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:54:31.318Z,1509699271.318 [BPC1](ERROR): Data Fault
2017-11-03T08:54:31.326Z,1509699271.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:31.420Z,1509699271.420 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:54:31.727Z,1509699271.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:31.774Z,1509699271.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:32.116Z,1509699272.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:32.139Z,1509699272.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:32.515Z,1509699272.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:32.539Z,1509699272.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:32.640Z,1509699272.640 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:54:32.640Z,1509699272.640 [BPC1] No Fault, FailCount= 1
2017-11-03T08:54:32.918Z,1509699272.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:33.002Z,1509699273.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:33.310Z,1509699273.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:33.331Z,1509699273.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:33.754Z,1509699273.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:33.807Z,1509699273.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:34.110Z,1509699274.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:34.131Z,1509699274.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:34.510Z,1509699274.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:34.531Z,1509699274.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:34.915Z,1509699274.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:34.931Z,1509699274.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:35.317Z,1509699275.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:35.333Z,1509699275.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:35.749Z,1509699275.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:35.796Z,1509699275.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:36.104Z,1509699276.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:36.120Z,1509699276.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:36.508Z,1509699276.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:36.531Z,1509699276.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:36.918Z,1509699276.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:36.949Z,1509699276.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:37.309Z,1509699277.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:37.324Z,1509699277.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:37.718Z,1509699277.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:37.749Z,1509699277.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:38.108Z,1509699278.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:38.124Z,1509699278.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:38.506Z,1509699278.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:38.525Z,1509699278.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:38.913Z,1509699278.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:38.950Z,1509699278.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:39.322Z,1509699279.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:39.349Z,1509699279.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:39.722Z,1509699279.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:39.751Z,1509699279.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:40.109Z,1509699280.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:40.125Z,1509699280.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:40.506Z,1509699280.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:40.522Z,1509699280.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:40.914Z,1509699280.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:40.951Z,1509699280.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:41.322Z,1509699281.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:41.351Z,1509699281.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:41.722Z,1509699281.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:41.750Z,1509699281.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:42.109Z,1509699282.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:42.125Z,1509699282.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:42.509Z,1509699282.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:42.525Z,1509699282.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:42.922Z,1509699282.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:42.950Z,1509699282.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:43.313Z,1509699283.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:43.329Z,1509699283.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:43.742Z,1509699283.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:43.771Z,1509699283.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:44.109Z,1509699284.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:44.126Z,1509699284.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:44.510Z,1509699284.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:44.570Z,1509699284.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:44.910Z,1509699284.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:44.927Z,1509699284.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:45.311Z,1509699285.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:45.335Z,1509699285.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:45.751Z,1509699285.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:45.818Z,1509699285.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:46.118Z,1509699286.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:46.135Z,1509699286.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:46.518Z,1509699286.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:46.575Z,1509699286.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:46.917Z,1509699286.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:46.933Z,1509699286.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:47.313Z,1509699287.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:47.363Z,1509699287.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:47.758Z,1509699287.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:47.830Z,1509699287.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:48.109Z,1509699288.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:48.128Z,1509699288.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:48.511Z,1509699288.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:48.528Z,1509699288.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:48.568Z,1509699288.568 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:54:48.568Z,1509699288.568 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T08:54:48.569Z,1509699288.569 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:54:48.621Z,1509699288.621 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:54:48.922Z,1509699288.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:48.936Z,1509699288.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:54:48.937Z,1509699288.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:48.974Z,1509699288.974 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:54:49.096Z,1509699289.096 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:54:49.323Z,1509699289.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:49.339Z,1509699289.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:54:49.340Z,1509699289.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:49.726Z,1509699289.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:49.741Z,1509699289.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:54:49.742Z,1509699289.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:50.109Z,1509699290.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:50.125Z,1509699290.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:54:50.126Z,1509699290.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:50.511Z,1509699290.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:50.526Z,1509699290.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:54:50.527Z,1509699290.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:50.612Z,1509699290.612 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:54:50.612Z,1509699290.612 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T08:54:50.712Z,1509699290.712 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:54:50.713Z,1509699290.713 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:54:50.713Z,1509699290.713 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:54:50.713Z,1509699290.713 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:54:50.895Z,1509699290.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:50.928Z,1509699290.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:54:50.929Z,1509699290.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:51.312Z,1509699291.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:51.327Z,1509699291.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:54:51.329Z,1509699291.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:51.709Z,1509699291.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:51.724Z,1509699291.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:54:51.725Z,1509699291.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:52.123Z,1509699292.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:52.137Z,1509699292.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:54:52.139Z,1509699292.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:52.522Z,1509699292.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:52.536Z,1509699292.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:54:52.537Z,1509699292.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:52.922Z,1509699292.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:52.942Z,1509699292.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:54:52.943Z,1509699292.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:53.297Z,1509699293.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:53.323Z,1509699293.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:54:53.325Z,1509699293.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:53.710Z,1509699293.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:53.730Z,1509699293.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:54:53.731Z,1509699293.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:54.109Z,1509699294.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:54.124Z,1509699294.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:54:54.125Z,1509699294.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:54.512Z,1509699294.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:54.527Z,1509699294.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:54:54.529Z,1509699294.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:54.838Z,1509699294.838 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:54:54.925Z,1509699294.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:54.947Z,1509699294.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:54:54.948Z,1509699294.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:54.987Z,1509699294.987 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:54:54.989Z,1509699294.989 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:54:54.989Z,1509699294.989 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:54:54.990Z,1509699294.990 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:54:55.322Z,1509699295.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:55.342Z,1509699295.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:54:55.343Z,1509699295.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:55.722Z,1509699295.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:55.738Z,1509699295.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:56.104Z,1509699296.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:56.139Z,1509699296.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:56.500Z,1509699296.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:56.528Z,1509699296.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:56.926Z,1509699296.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:56.942Z,1509699296.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:57.325Z,1509699297.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:57.341Z,1509699297.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:57.722Z,1509699297.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:57.743Z,1509699297.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:58.104Z,1509699298.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:58.132Z,1509699298.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:58.500Z,1509699298.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:58.555Z,1509699298.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:58.923Z,1509699298.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:58.938Z,1509699298.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:59.328Z,1509699299.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:59.345Z,1509699299.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:54:59.722Z,1509699299.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:54:59.783Z,1509699299.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:00.104Z,1509699300.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:00.136Z,1509699300.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:00.503Z,1509699300.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:00.551Z,1509699300.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:00.922Z,1509699300.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:00.941Z,1509699300.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:01.325Z,1509699301.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:01.391Z,1509699301.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:01.724Z,1509699301.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:01.787Z,1509699301.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:02.105Z,1509699302.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:02.137Z,1509699302.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:02.500Z,1509699302.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:02.516Z,1509699302.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:02.914Z,1509699302.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:02.947Z,1509699302.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:03.328Z,1509699303.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:03.344Z,1509699303.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:03.713Z,1509699303.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:03.746Z,1509699303.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:06.000Z,1509699307.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:07.015Z,1509699307.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:07.156Z,1509699307.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:07.198Z,1509699307.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:07.565Z,1509699307.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:07.591Z,1509699307.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:07.981Z,1509699307.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:07.996Z,1509699307.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:08.362Z,1509699308.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:08.393Z,1509699308.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:08.752Z,1509699308.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:08.798Z,1509699308.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:09.156Z,1509699309.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:09.172Z,1509699309.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:09.552Z,1509699309.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:09.568Z,1509699309.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:09.965Z,1509699309.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:09.997Z,1509699309.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:10.366Z,1509699310.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:10.402Z,1509699310.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:10.766Z,1509699310.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:10.797Z,1509699310.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:11.155Z,1509699311.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:11.195Z,1509699311.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:11.552Z,1509699311.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:11.568Z,1509699311.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:11.952Z,1509699311.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:12.018Z,1509699312.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:12.356Z,1509699312.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:12.371Z,1509699312.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:12.793Z,1509699312.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:12.820Z,1509699312.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:13.170Z,1509699313.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:13.202Z,1509699313.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:13.562Z,1509699313.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:13.577Z,1509699313.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:13.965Z,1509699313.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:14.012Z,1509699314.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:14.356Z,1509699314.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:14.371Z,1509699314.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:14.759Z,1509699314.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:14.813Z,1509699314.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:15.153Z,1509699315.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:15.175Z,1509699315.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:15.556Z,1509699315.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:15.611Z,1509699315.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:15.968Z,1509699315.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:16.021Z,1509699316.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:16.365Z,1509699316.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:16.381Z,1509699316.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:16.768Z,1509699316.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:16.783Z,1509699316.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:17.158Z,1509699317.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:17.242Z,1509699317.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:17.551Z,1509699317.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:17.578Z,1509699317.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:17.949Z,1509699317.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:17.979Z,1509699317.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:18.345Z,1509699318.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:18.373Z,1509699318.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:18.751Z,1509699318.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:18.778Z,1509699318.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:19.168Z,1509699319.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:19.251Z,1509699319.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:19.569Z,1509699319.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:19.590Z,1509699319.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:19.957Z,1509699319.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:19.984Z,1509699319.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:20.349Z,1509699320.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:20.380Z,1509699320.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:20.753Z,1509699320.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:20.803Z,1509699320.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:21.150Z,1509699321.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:21.181Z,1509699321.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:21.549Z,1509699321.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:21.564Z,1509699321.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:21.975Z,1509699321.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:21.991Z,1509699321.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:22.361Z,1509699322.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:22.387Z,1509699322.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:22.774Z,1509699322.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:22.795Z,1509699322.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:23.149Z,1509699323.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:23.165Z,1509699323.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:23.551Z,1509699323.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:23.566Z,1509699323.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:23.953Z,1509699323.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:23.977Z,1509699323.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:24.349Z,1509699324.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:24.364Z,1509699324.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:24.759Z,1509699324.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:24.803Z,1509699324.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:25.162Z,1509699325.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:25.193Z,1509699325.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:25.566Z,1509699325.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:25.591Z,1509699325.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:25.961Z,1509699325.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:25.993Z,1509699325.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:26.352Z,1509699326.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:26.368Z,1509699326.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:26.788Z,1509699326.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:26.846Z,1509699326.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:27.152Z,1509699327.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:27.167Z,1509699327.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:27.552Z,1509699327.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:27.567Z,1509699327.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:27.961Z,1509699327.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:28.007Z,1509699328.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:28.369Z,1509699328.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:28.402Z,1509699328.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:28.769Z,1509699328.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:28.800Z,1509699328.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:29.154Z,1509699329.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:29.212Z,1509699329.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:29.556Z,1509699329.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:29.571Z,1509699329.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:29.955Z,1509699329.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:30.006Z,1509699330.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:30.357Z,1509699330.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:30.403Z,1509699330.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:30.756Z,1509699330.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:30.771Z,1509699330.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:31.161Z,1509699331.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:31.177Z,1509699331.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:31.565Z,1509699331.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:31.580Z,1509699331.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:31.965Z,1509699331.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:31.981Z,1509699331.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:32.356Z,1509699332.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:32.371Z,1509699332.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:32.756Z,1509699332.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:32.779Z,1509699332.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:33.159Z,1509699333.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:33.174Z,1509699333.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:33.548Z,1509699333.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:33.595Z,1509699333.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:33.965Z,1509699333.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:33.980Z,1509699333.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:34.373Z,1509699334.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:34.389Z,1509699334.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:34.774Z,1509699334.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:34.789Z,1509699334.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:35.148Z,1509699335.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:35.174Z,1509699335.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:35.543Z,1509699335.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:35.571Z,1509699335.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:35.951Z,1509699335.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:35.977Z,1509699335.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:36.352Z,1509699336.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:36.377Z,1509699336.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:36.751Z,1509699336.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:36.782Z,1509699336.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:37.170Z,1509699337.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:37.185Z,1509699337.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:37.570Z,1509699337.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:37.585Z,1509699337.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:37.971Z,1509699337.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:37.986Z,1509699337.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:38.351Z,1509699338.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:38.377Z,1509699338.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:38.774Z,1509699338.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:38.789Z,1509699338.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:39.152Z,1509699339.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:39.179Z,1509699339.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:39.551Z,1509699339.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:39.587Z,1509699339.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:39.971Z,1509699339.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:39.986Z,1509699339.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:40.366Z,1509699340.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:40.381Z,1509699340.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:40.787Z,1509699340.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:40.838Z,1509699340.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:41.149Z,1509699341.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:41.177Z,1509699341.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:41.552Z,1509699341.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:41.580Z,1509699341.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:41.951Z,1509699341.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:42.025Z,1509699342.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:42.350Z,1509699342.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:42.405Z,1509699342.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:42.745Z,1509699342.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:42.776Z,1509699342.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:43.182Z,1509699343.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:43.239Z,1509699343.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:43.562Z,1509699343.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:43.588Z,1509699343.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:43.974Z,1509699343.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:44.034Z,1509699344.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:44.349Z,1509699344.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:44.407Z,1509699344.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:44.751Z,1509699344.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:44.787Z,1509699344.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:45.152Z,1509699345.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:45.215Z,1509699345.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:45.548Z,1509699345.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:45.563Z,1509699345.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:45.961Z,1509699345.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:45.994Z,1509699345.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:46.365Z,1509699346.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:46.398Z,1509699346.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:46.761Z,1509699346.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:46.793Z,1509699346.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:47.149Z,1509699347.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:47.164Z,1509699347.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:47.548Z,1509699347.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:47.583Z,1509699347.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:47.951Z,1509699347.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:47.977Z,1509699347.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:48.353Z,1509699348.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:48.379Z,1509699348.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:48.748Z,1509699348.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:48.783Z,1509699348.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:49.174Z,1509699349.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:49.195Z,1509699349.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:49.574Z,1509699349.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:49.589Z,1509699349.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:49.976Z,1509699349.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:49.991Z,1509699349.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:50.351Z,1509699350.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:50.382Z,1509699350.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:50.748Z,1509699350.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:50.793Z,1509699350.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:51.152Z,1509699351.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:51.168Z,1509699351.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:51.553Z,1509699351.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:51.595Z,1509699351.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:51.966Z,1509699351.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:51.994Z,1509699351.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:52.361Z,1509699352.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:52.394Z,1509699352.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:52.771Z,1509699352.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:52.801Z,1509699352.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:53.152Z,1509699353.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:53.168Z,1509699353.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:53.552Z,1509699353.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:53.568Z,1509699353.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:53.952Z,1509699353.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:53.968Z,1509699353.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:54.357Z,1509699354.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:54.372Z,1509699354.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:54.783Z,1509699354.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:54.814Z,1509699354.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:55.169Z,1509699355.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:55.204Z,1509699355.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:55.561Z,1509699355.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:55.577Z,1509699355.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:55.969Z,1509699355.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:55.000Z,1509699356.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:56.356Z,1509699356.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:56.418Z,1509699356.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:56.754Z,1509699356.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:56.811Z,1509699356.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:57.156Z,1509699357.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:57.171Z,1509699357.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:57.559Z,1509699357.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:57.579Z,1509699357.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:57.964Z,1509699357.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:58.014Z,1509699358.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:58.365Z,1509699358.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:58.380Z,1509699358.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:58.764Z,1509699358.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:58.814Z,1509699358.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:59.157Z,1509699359.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:59.255Z,1509699359.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:59.560Z,1509699359.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:59.575Z,1509699359.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:55:59.957Z,1509699359.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:55:59.972Z,1509699359.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:00.358Z,1509699360.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:00.373Z,1509699360.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:00.760Z,1509699360.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:00.775Z,1509699360.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:01.169Z,1509699361.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:01.241Z,1509699361.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:01.568Z,1509699361.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:01.584Z,1509699361.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:01.969Z,1509699361.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:01.984Z,1509699361.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:01.988Z,1509699361.988 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T08:51:01.8Z
2017-11-03T08:56:01.988Z,1509699361.988 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T08:56:01.988Z,1509699361.988 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T08:56:02.360Z,1509699362.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:02.379Z,1509699362.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:03.066Z,1509699363.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:03.157Z,1509699363.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:03.296Z,1509699363.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:03.363Z,1509699363.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:08.749Z,1509699368.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:08.780Z,1509699368.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:08.945Z,1509699368.945 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0204.lzma
2017-11-03T08:56:08.998Z,1509699368.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:09.040Z,1509699369.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:09.394Z,1509699369.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:09.423Z,1509699369.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:09.727Z,1509699369.727 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0204.lzma.bak
2017-11-03T08:56:09.727Z,1509699369.727 [DataOverHttps](INFO): SBD MOMSN=5183176
2017-11-03T08:56:09.779Z,1509699369.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:09.812Z,1509699369.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:10.565Z,1509699370.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:10.610Z,1509699370.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:10.750Z,1509699370.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:10.801Z,1509699370.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:17.779Z,1509699377.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:17.796Z,1509699377.796 [BPC1](ERROR): Failed to receive battery data
2017-11-03T08:56:17.796Z,1509699377.796 [BPC1] Communications Fault, FailCount= 1
2017-11-03T08:56:17.796Z,1509699377.796 [BPC1](ERROR): Communications Fault
2017-11-03T08:56:17.834Z,1509699377.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:17.965Z,1509699377.965 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T08:56:18.035Z,1509699378.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:18.062Z,1509699378.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:18.423Z,1509699378.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:18.451Z,1509699378.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:18.808Z,1509699378.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:18.851Z,1509699378.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:18.957Z,1509699378.957 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:56:18.957Z,1509699378.957 [BPC1] No Fault, FailCount= 1
2017-11-03T08:56:19.205Z,1509699379.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:19.327Z,1509699379.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:19.632Z,1509699379.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:19.656Z,1509699379.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:26.085Z,1509699386.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:26.136Z,1509699386.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:26.249Z,1509699386.249 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20171103T001125/Express0205.lzma
2017-11-03T08:56:26.298Z,1509699386.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:26.338Z,1509699386.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:26.689Z,1509699386.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:26.704Z,1509699386.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:27.051Z,1509699387.051 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0205.lzma.bak
2017-11-03T08:56:27.051Z,1509699387.051 [DataOverHttps](INFO): SBD MOMSN=5183178
2017-11-03T08:56:27.085Z,1509699387.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:27.116Z,1509699387.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:27.681Z,1509699387.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:27.696Z,1509699387.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:27.699Z,1509699387.699 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T08:56:27.700Z,1509699387.700 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T08:56:27.700Z,1509699387.700 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T08:56:27.889Z,1509699387.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:27.923Z,1509699387.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:31.206Z,1509699391.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:31.243Z,1509699391.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:31.390Z,1509699391.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:31.405Z,1509699391.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:31.766Z,1509699391.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:31.797Z,1509699391.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:32.168Z,1509699392.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:32.203Z,1509699392.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:32.567Z,1509699392.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:32.601Z,1509699392.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:32.999Z,1509699392.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:33.015Z,1509699393.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:33.382Z,1509699393.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:33.413Z,1509699393.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:33.781Z,1509699393.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:33.811Z,1509699393.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:34.168Z,1509699394.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:34.184Z,1509699394.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:34.568Z,1509699394.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:34.583Z,1509699394.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:34.973Z,1509699394.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:34.988Z,1509699394.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:35.369Z,1509699395.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:35.385Z,1509699395.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:35.768Z,1509699395.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:35.783Z,1509699395.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:36.181Z,1509699396.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:36.211Z,1509699396.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:36.585Z,1509699396.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:36.614Z,1509699396.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:36.981Z,1509699396.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:37.013Z,1509699397.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:37.369Z,1509699397.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:37.384Z,1509699397.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:37.769Z,1509699397.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:37.785Z,1509699397.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:38.192Z,1509699398.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:38.335Z,1509699398.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:38.569Z,1509699398.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:38.585Z,1509699398.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:39.009Z,1509699399.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:39.059Z,1509699399.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:39.382Z,1509699399.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:39.412Z,1509699399.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:39.782Z,1509699399.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:39.831Z,1509699399.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:40.169Z,1509699400.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:40.215Z,1509699400.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:40.569Z,1509699400.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:40.585Z,1509699400.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:40.975Z,1509699400.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:40.990Z,1509699400.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:41.369Z,1509699401.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:41.385Z,1509699401.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:41.782Z,1509699401.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:41.813Z,1509699401.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:42.182Z,1509699402.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:42.210Z,1509699402.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:42.586Z,1509699402.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:42.619Z,1509699402.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:42.981Z,1509699402.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:43.012Z,1509699403.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:43.374Z,1509699403.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:43.390Z,1509699403.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:43.763Z,1509699403.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:43.795Z,1509699403.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:44.166Z,1509699404.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:44.193Z,1509699404.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:44.562Z,1509699404.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:44.597Z,1509699404.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:44.985Z,1509699404.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:45.001Z,1509699405.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:45.370Z,1509699405.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:45.397Z,1509699405.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:45.787Z,1509699405.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:45.802Z,1509699405.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:46.166Z,1509699406.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:46.237Z,1509699406.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:46.568Z,1509699406.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:46.599Z,1509699406.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:46.964Z,1509699406.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:46.988Z,1509699406.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:47.369Z,1509699407.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:47.385Z,1509699407.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:47.768Z,1509699407.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:47.783Z,1509699407.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:48.182Z,1509699408.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:48.215Z,1509699408.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:48.582Z,1509699408.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:48.613Z,1509699408.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:48.981Z,1509699408.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:49.007Z,1509699409.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:49.371Z,1509699409.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:49.409Z,1509699409.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:49.775Z,1509699409.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:49.801Z,1509699409.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:50.168Z,1509699410.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:50.205Z,1509699410.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:50.561Z,1509699410.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:50.576Z,1509699410.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:50.768Z,1509699410.768 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:56:50.768Z,1509699410.768 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T08:56:50.768Z,1509699410.768 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:56:50.999Z,1509699410.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:51.018Z,1509699411.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:56:51.019Z,1509699411.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:51.101Z,1509699411.101 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:56:51.172Z,1509699411.172 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:56:51.270Z,1509699411.270 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:56:51.393Z,1509699411.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:51.410Z,1509699411.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:56:51.411Z,1509699411.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:51.788Z,1509699411.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:51.803Z,1509699411.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:56:51.804Z,1509699411.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:52.167Z,1509699412.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:52.247Z,1509699412.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-03T08:56:52.249Z,1509699412.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:52.564Z,1509699412.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:52.619Z,1509699412.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:56:52.620Z,1509699412.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:52.697Z,1509699412.697 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T08:56:52.697Z,1509699412.697 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T08:56:52.884Z,1509699412.884 [Rowe_600LCM](INFO): Initializing
2017-11-03T08:56:52.885Z,1509699412.885 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T08:56:52.885Z,1509699412.885 [Rowe_600LCM](INFO): LCM OK
2017-11-03T08:56:52.885Z,1509699412.885 [Rowe_600LCM](INFO): Powering up
2017-11-03T08:56:52.988Z,1509699412.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:53.003Z,1509699413.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:56:53.005Z,1509699413.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:53.370Z,1509699413.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:53.396Z,1509699413.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:56:53.397Z,1509699413.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:53.765Z,1509699413.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:53.826Z,1509699413.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-03T08:56:53.827Z,1509699413.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:54.178Z,1509699414.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:54.200Z,1509699414.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:56:54.202Z,1509699414.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:54.577Z,1509699414.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:54.628Z,1509699414.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T08:56:54.629Z,1509699414.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:54.980Z,1509699414.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:55.027Z,1509699415.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T08:56:55.028Z,1509699415.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:55.364Z,1509699415.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:55.379Z,1509699415.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:56:55.380Z,1509699415.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:55.768Z,1509699415.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:55.803Z,1509699415.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:56:55.804Z,1509699415.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:56.165Z,1509699416.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:56.179Z,1509699416.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:56:56.180Z,1509699416.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:56.565Z,1509699416.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:56.579Z,1509699416.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:56:56.581Z,1509699416.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:57.011Z,1509699417.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:57.063Z,1509699417.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T08:56:57.064Z,1509699417.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:57.106Z,1509699417.106 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T08:56:57.200Z,1509699417.200 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T08:56:57.202Z,1509699417.202 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T08:56:57.203Z,1509699417.203 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T08:56:57.203Z,1509699417.203 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T08:56:57.383Z,1509699417.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:57.411Z,1509699417.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:56:57.413Z,1509699417.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:57.778Z,1509699417.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:57.808Z,1509699417.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:58.169Z,1509699418.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:58.184Z,1509699418.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:58.184Z,1509699418.184 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 174
2017-11-03T08:56:58.185Z,1509699418.185 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:56:58.186Z,1509699418.186 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:58.187Z,1509699418.187 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 174
2017-11-03T08:56:58.187Z,1509699418.187 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:56:58.217Z,1509699418.217 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:58.217Z,1509699418.217 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 174
2017-11-03T08:56:58.218Z,1509699418.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:56:58.307Z,1509699418.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:56:58.308Z,1509699418.308 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:56:58.308Z,1509699418.308 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:56:58.576Z,1509699418.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:58.676Z,1509699418.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:56:58.677Z,1509699418.677 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 174
2017-11-03T08:56:58.677Z,1509699418.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:56:58.677Z,1509699418.677 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 174
2017-11-03T08:56:58.678Z,1509699418.678 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:56:58.678Z,1509699418.678 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 174
2017-11-03T08:56:58.972Z,1509699418.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:58.986Z,1509699418.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T08:56:58.987Z,1509699418.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:56:58.987Z,1509699418.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:56:58.987Z,1509699418.987 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T08:56:58.988Z,1509699418.988 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:56:58.988Z,1509699418.988 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:56:58.989Z,1509699418.989 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T08:56:58.989Z,1509699418.989 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T08:56:58.989Z,1509699418.989 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T08:56:59.363Z,1509699419.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:59.395Z,1509699419.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:56:59.775Z,1509699419.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:56:59.790Z,1509699419.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:00.185Z,1509699420.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:00.201Z,1509699420.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:00.585Z,1509699420.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:00.601Z,1509699420.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:00.986Z,1509699420.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:01.001Z,1509699421.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:01.375Z,1509699421.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:01.395Z,1509699421.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:01.764Z,1509699421.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:01.799Z,1509699421.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:02.179Z,1509699422.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:02.194Z,1509699422.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:02.568Z,1509699422.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:02.594Z,1509699422.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:02.986Z,1509699422.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:03.001Z,1509699423.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:03.386Z,1509699423.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:03.413Z,1509699423.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:03.807Z,1509699423.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:03.833Z,1509699423.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:04.183Z,1509699424.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:04.210Z,1509699424.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:04.567Z,1509699424.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:04.594Z,1509699424.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:04.987Z,1509699424.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:05.007Z,1509699425.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:05.366Z,1509699425.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:05.393Z,1509699425.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:05.765Z,1509699425.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:05.792Z,1509699425.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:06.185Z,1509699426.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:06.207Z,1509699426.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:06.589Z,1509699426.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:06.611Z,1509699426.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:06.986Z,1509699426.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:07.019Z,1509699427.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:07.367Z,1509699427.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:07.419Z,1509699427.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:07.764Z,1509699427.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:07.798Z,1509699427.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:08.166Z,1509699428.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:08.222Z,1509699428.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:08.567Z,1509699428.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:08.598Z,1509699428.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:08.981Z,1509699428.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:09.027Z,1509699429.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:09.392Z,1509699429.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:09.453Z,1509699429.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:09.778Z,1509699429.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:09.802Z,1509699429.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:10.171Z,1509699430.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:10.205Z,1509699430.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:10.565Z,1509699430.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:10.580Z,1509699430.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:10.969Z,1509699430.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:10.984Z,1509699430.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:11.364Z,1509699431.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:11.405Z,1509699431.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:11.765Z,1509699431.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:11.780Z,1509699431.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:12.178Z,1509699432.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:12.201Z,1509699432.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:12.577Z,1509699432.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:12.602Z,1509699432.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:12.980Z,1509699432.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:13.004Z,1509699433.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:13.367Z,1509699433.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:13.393Z,1509699433.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:13.767Z,1509699433.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:13.792Z,1509699433.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:14.166Z,1509699434.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:14.193Z,1509699434.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:14.561Z,1509699434.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:14.594Z,1509699434.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:14.982Z,1509699434.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:14.997Z,1509699434.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:15.386Z,1509699435.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:15.406Z,1509699435.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:15.786Z,1509699435.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:15.802Z,1509699435.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:16.167Z,1509699436.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:16.192Z,1509699436.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:16.565Z,1509699436.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:16.593Z,1509699436.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:16.981Z,1509699436.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:17.015Z,1509699437.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:17.366Z,1509699437.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:17.392Z,1509699437.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:17.763Z,1509699437.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:17.795Z,1509699437.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:18.178Z,1509699438.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:18.201Z,1509699438.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:18.586Z,1509699438.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:18.607Z,1509699438.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:18.990Z,1509699438.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:19.011Z,1509699439.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:19.367Z,1509699439.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:19.393Z,1509699439.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:19.768Z,1509699439.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:19.795Z,1509699439.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:20.169Z,1509699440.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:20.196Z,1509699440.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:20.568Z,1509699440.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:20.594Z,1509699440.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:20.986Z,1509699440.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:21.001Z,1509699441.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:21.388Z,1509699441.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:21.474Z,1509699441.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:21.817Z,1509699441.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:21.849Z,1509699441.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:22.170Z,1509699442.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:22.194Z,1509699442.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:22.569Z,1509699442.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:22.627Z,1509699442.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:22.973Z,1509699442.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:22.988Z,1509699442.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:23.374Z,1509699443.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:23.426Z,1509699443.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:23.774Z,1509699443.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:23.827Z,1509699443.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:24.178Z,1509699444.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:24.193Z,1509699444.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:24.577Z,1509699444.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:24.592Z,1509699444.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:24.993Z,1509699444.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:25.020Z,1509699445.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:25.372Z,1509699445.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:25.388Z,1509699445.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:25.772Z,1509699445.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:25.787Z,1509699445.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:26.170Z,1509699446.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:26.186Z,1509699446.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:26.573Z,1509699446.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:26.589Z,1509699446.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:26.974Z,1509699446.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:26.990Z,1509699446.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:27.386Z,1509699447.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:27.417Z,1509699447.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:27.786Z,1509699447.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:27.819Z,1509699447.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:28.174Z,1509699448.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:28.189Z,1509699448.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:31.471Z,1509699451.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:31.486Z,1509699451.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:31.596Z,1509699451.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:31.643Z,1509699451.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:32.020Z,1509699452.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:32.036Z,1509699452.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:32.426Z,1509699452.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:32.441Z,1509699452.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:32.819Z,1509699452.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:32.834Z,1509699452.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:33.241Z,1509699453.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:33.298Z,1509699453.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:33.599Z,1509699453.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:33.639Z,1509699453.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:33.996Z,1509699453.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:34.036Z,1509699454.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:34.401Z,1509699454.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:34.416Z,1509699454.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:34.803Z,1509699454.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:34.847Z,1509699454.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:35.253Z,1509699455.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:35.290Z,1509699455.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:35.612Z,1509699455.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:35.640Z,1509699455.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:36.018Z,1509699456.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:36.116Z,1509699456.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:36.396Z,1509699456.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:36.441Z,1509699456.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:36.800Z,1509699456.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:36.846Z,1509699456.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:37.200Z,1509699457.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:37.220Z,1509699457.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:37.606Z,1509699457.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:37.663Z,1509699457.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:38.013Z,1509699458.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:38.082Z,1509699458.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:38.421Z,1509699458.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:38.445Z,1509699458.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:38.820Z,1509699458.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:38.844Z,1509699458.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:39.202Z,1509699459.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:39.217Z,1509699459.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:39.600Z,1509699459.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:39.650Z,1509699459.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:39.996Z,1509699459.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:40.012Z,1509699460.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:40.396Z,1509699460.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:40.416Z,1509699460.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:40.817Z,1509699460.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:40.842Z,1509699460.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:41.213Z,1509699461.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:41.247Z,1509699461.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:41.620Z,1509699461.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:41.644Z,1509699461.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:42.020Z,1509699462.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:42.044Z,1509699462.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:42.405Z,1509699462.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:42.420Z,1509699462.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:42.805Z,1509699462.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:42.858Z,1509699462.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:43.198Z,1509699463.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:43.223Z,1509699463.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:43.597Z,1509699463.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:43.617Z,1509699463.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:44.014Z,1509699464.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:44.045Z,1509699464.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:44.417Z,1509699464.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:44.451Z,1509699464.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:44.820Z,1509699464.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:44.845Z,1509699464.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:45.214Z,1509699465.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:45.245Z,1509699465.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:45.607Z,1509699465.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:45.646Z,1509699465.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:46.005Z,1509699466.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:46.050Z,1509699466.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:46.406Z,1509699466.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:46.427Z,1509699466.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:46.807Z,1509699466.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:46.824Z,1509699466.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:47.259Z,1509699467.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:47.304Z,1509699467.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:47.617Z,1509699467.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:47.647Z,1509699467.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:48.020Z,1509699468.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:48.027Z,1509699468.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x48757 got:0x6593
2017-11-03T08:57:48.051Z,1509699468.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:48.407Z,1509699468.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:48.424Z,1509699468.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:48.808Z,1509699468.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:48.822Z,1509699468.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:49.247Z,1509699469.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:49.267Z,1509699469.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:49.606Z,1509699469.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:49.646Z,1509699469.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:50.011Z,1509699470.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:50.019Z,1509699470.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x50075 got:0x40673
2017-11-03T08:57:50.102Z,1509699470.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:50.444Z,1509699470.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:50.460Z,1509699470.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:50.812Z,1509699470.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:50.854Z,1509699470.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:51.206Z,1509699471.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:51.259Z,1509699471.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:51.611Z,1509699471.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:51.625Z,1509699471.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:52.008Z,1509699472.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:52.060Z,1509699472.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:52.405Z,1509699472.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:52.435Z,1509699472.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:52.804Z,1509699472.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:52.855Z,1509699472.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:53.214Z,1509699473.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:53.235Z,1509699473.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:53.616Z,1509699473.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:53.631Z,1509699473.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:54.013Z,1509699474.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:54.054Z,1509699474.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:54.404Z,1509699474.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:54.424Z,1509699474.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:54.804Z,1509699474.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:54.822Z,1509699474.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:55.202Z,1509699475.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:55.227Z,1509699475.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:55.607Z,1509699475.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:55.649Z,1509699475.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:56.013Z,1509699476.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:56.031Z,1509699476.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:56.416Z,1509699476.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:56.431Z,1509699476.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:56.819Z,1509699476.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:56.848Z,1509699476.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:57.205Z,1509699477.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:57.239Z,1509699477.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:57.591Z,1509699477.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:57.628Z,1509699477.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:58.014Z,1509699478.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:58.038Z,1509699478.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:58.399Z,1509699478.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:58.426Z,1509699478.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:58.792Z,1509699478.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:58.833Z,1509699478.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:59.206Z,1509699479.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:59.230Z,1509699479.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:57:59.626Z,1509699479.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:57:59.651Z,1509699479.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:00.012Z,1509699480.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:00.039Z,1509699480.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:00.400Z,1509699480.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:00.436Z,1509699480.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:00.802Z,1509699480.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:00.837Z,1509699480.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:01.268Z,1509699481.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:01.334Z,1509699481.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:01.610Z,1509699481.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:01.625Z,1509699481.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:02.010Z,1509699482.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:02.049Z,1509699482.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:02.409Z,1509699482.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:02.429Z,1509699482.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:02.813Z,1509699482.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:02.828Z,1509699482.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:03.247Z,1509699483.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:03.279Z,1509699483.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:03.609Z,1509699483.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:03.647Z,1509699483.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:04.005Z,1509699484.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:04.025Z,1509699484.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:04.410Z,1509699484.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:04.474Z,1509699484.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:04.802Z,1509699484.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:04.864Z,1509699484.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:05.212Z,1509699485.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:05.253Z,1509699485.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:05.612Z,1509699485.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:05.663Z,1509699485.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:06.016Z,1509699486.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:06.031Z,1509699486.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:06.407Z,1509699486.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:06.455Z,1509699486.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:06.802Z,1509699486.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:06.859Z,1509699486.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:07.201Z,1509699487.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:07.222Z,1509699487.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:07.606Z,1509699487.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:07.631Z,1509699487.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:08.016Z,1509699488.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:08.055Z,1509699488.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:08.413Z,1509699488.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:08.455Z,1509699488.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:08.813Z,1509699488.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:08.831Z,1509699488.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:09.206Z,1509699489.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:09.223Z,1509699489.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:09.602Z,1509699489.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:09.627Z,1509699489.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:10.004Z,1509699490.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:10.049Z,1509699490.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:10.405Z,1509699490.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:10.425Z,1509699490.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:10.817Z,1509699490.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:10.833Z,1509699490.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:11.217Z,1509699491.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:11.254Z,1509699491.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:11.612Z,1509699491.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:11.649Z,1509699491.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:12.016Z,1509699492.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:12.033Z,1509699492.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:12.406Z,1509699492.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:12.431Z,1509699492.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:12.807Z,1509699492.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:12.827Z,1509699492.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:13.204Z,1509699493.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:13.238Z,1509699493.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:13.604Z,1509699493.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:13.624Z,1509699493.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:14.020Z,1509699494.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:14.035Z,1509699494.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:14.420Z,1509699494.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:14.458Z,1509699494.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:14.816Z,1509699494.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:14.858Z,1509699494.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:15.260Z,1509699495.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:15.267Z,1509699495.267 [PNI_TCM](ERROR): CRC does not match. Expected:0x48911 got:0x49633
2017-11-03T08:58:15.314Z,1509699495.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:15.611Z,1509699495.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:15.626Z,1509699495.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:16.004Z,1509699496.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:16.027Z,1509699496.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:16.405Z,1509699496.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:16.439Z,1509699496.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:16.814Z,1509699496.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:16.857Z,1509699496.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:17.263Z,1509699497.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:17.309Z,1509699497.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:17.620Z,1509699497.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:17.635Z,1509699497.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:18.022Z,1509699498.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:18.050Z,1509699498.050 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T08:58:18.050Z,1509699498.050 [BPC1] Data Fault, FailCount= 1
2017-11-03T08:58:18.050Z,1509699498.050 [BPC1](ERROR): Data Fault
2017-11-03T08:58:18.062Z,1509699498.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:18.154Z,1509699498.154 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T08:58:18.407Z,1509699498.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:18.443Z,1509699498.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:18.818Z,1509699498.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:18.824Z,1509699498.824 [PNI_TCM](ERROR): CRC does not match. Expected:0x38408 got:0x60509
2017-11-03T08:58:18.859Z,1509699498.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:19.210Z,1509699499.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:19.225Z,1509699499.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:19.312Z,1509699499.312 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T08:58:19.313Z,1509699499.313 [BPC1] No Fault, FailCount= 1
2017-11-03T08:58:19.606Z,1509699499.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:19.687Z,1509699499.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:20.020Z,1509699500.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:20.067Z,1509699500.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:20.422Z,1509699500.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:20.451Z,1509699500.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:20.815Z,1509699500.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:20.834Z,1509699500.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:21.205Z,1509699501.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:21.239Z,1509699501.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:21.608Z,1509699501.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:21.628Z,1509699501.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:22.011Z,1509699502.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:22.030Z,1509699502.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:22.406Z,1509699502.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:22.462Z,1509699502.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:22.795Z,1509699502.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:22.836Z,1509699502.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:23.221Z,1509699503.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:23.236Z,1509699503.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:23.622Z,1509699503.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:23.637Z,1509699503.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:24.021Z,1509699504.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:24.036Z,1509699504.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:24.394Z,1509699504.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:24.439Z,1509699504.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:24.814Z,1509699504.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:24.837Z,1509699504.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:25.211Z,1509699505.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:25.231Z,1509699505.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:25.594Z,1509699505.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:25.623Z,1509699505.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:26.019Z,1509699506.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:26.060Z,1509699506.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:26.424Z,1509699506.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:26.431Z,1509699506.431 [PNI_TCM](ERROR): CRC does not match. Expected:0x26247 got:0x16717
2017-11-03T08:58:26.465Z,1509699506.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:26.823Z,1509699506.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:26.843Z,1509699506.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:27.197Z,1509699507.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:27.225Z,1509699507.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:27.607Z,1509699507.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:27.642Z,1509699507.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:28.007Z,1509699508.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:28.027Z,1509699508.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:28.412Z,1509699508.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:28.432Z,1509699508.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:31.712Z,1509699511.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:31.728Z,1509699511.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:31.865Z,1509699511.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:31.932Z,1509699511.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:32.260Z,1509699512.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:32.323Z,1509699512.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:32.726Z,1509699512.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:32.747Z,1509699512.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:33.040Z,1509699513.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:33.087Z,1509699513.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:33.439Z,1509699513.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:33.474Z,1509699513.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:33.836Z,1509699513.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:33.887Z,1509699513.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:34.242Z,1509699514.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:34.287Z,1509699514.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:34.668Z,1509699514.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:34.727Z,1509699514.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:35.066Z,1509699515.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:35.081Z,1509699515.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:35.476Z,1509699515.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:35.495Z,1509699515.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:35.861Z,1509699515.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:35.876Z,1509699515.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:36.240Z,1509699516.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:36.276Z,1509699516.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:36.650Z,1509699516.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:36.722Z,1509699516.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:37.044Z,1509699517.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:37.083Z,1509699517.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:37.447Z,1509699517.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:37.462Z,1509699517.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:37.843Z,1509699517.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:37.863Z,1509699517.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:38.257Z,1509699518.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:38.289Z,1509699518.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:38.657Z,1509699518.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:38.712Z,1509699518.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:39.057Z,1509699519.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:39.089Z,1509699519.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:39.444Z,1509699519.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:39.459Z,1509699519.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:39.857Z,1509699519.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:39.890Z,1509699519.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:40.248Z,1509699520.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:40.267Z,1509699520.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:40.645Z,1509699520.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:40.690Z,1509699520.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:41.061Z,1509699521.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:41.087Z,1509699521.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:41.457Z,1509699521.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:41.489Z,1509699521.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:41.857Z,1509699521.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:41.889Z,1509699521.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:42.244Z,1509699522.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:42.259Z,1509699522.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:42.647Z,1509699522.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:42.667Z,1509699522.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:43.045Z,1509699523.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:43.061Z,1509699523.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:43.452Z,1509699523.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:43.490Z,1509699523.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:43.845Z,1509699523.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:43.860Z,1509699523.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:44.258Z,1509699524.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:44.289Z,1509699524.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:44.657Z,1509699524.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:44.689Z,1509699524.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:45.054Z,1509699525.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:45.085Z,1509699525.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:45.455Z,1509699525.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:45.488Z,1509699525.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:45.845Z,1509699525.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:45.860Z,1509699525.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:46.245Z,1509699526.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:46.306Z,1509699526.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:46.698Z,1509699526.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:46.767Z,1509699526.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:47.053Z,1509699527.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:47.069Z,1509699527.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:47.453Z,1509699527.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:47.499Z,1509699527.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:47.849Z,1509699527.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:47.864Z,1509699527.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:48.248Z,1509699528.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:48.288Z,1509699528.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:48.677Z,1509699528.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:48.763Z,1509699528.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:49.051Z,1509699529.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:49.066Z,1509699529.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:49.453Z,1509699529.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:49.468Z,1509699529.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:49.852Z,1509699529.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:49.875Z,1509699529.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:50.256Z,1509699530.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:50.272Z,1509699530.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:50.708Z,1509699530.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:50.751Z,1509699530.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:51.056Z,1509699531.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:51.079Z,1509699531.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:51.448Z,1509699531.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:51.464Z,1509699531.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:51.858Z,1509699531.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:51.874Z,1509699531.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:52.245Z,1509699532.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:52.261Z,1509699532.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:52.648Z,1509699532.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:52.663Z,1509699532.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:53.064Z,1509699533.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:53.080Z,1509699533.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:53.457Z,1509699533.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:53.472Z,1509699533.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:53.580Z,1509699533.580 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T08:58:53.580Z,1509699533.580 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T08:58:53.580Z,1509699533.580 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T08:58:53.857Z,1509699533.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:53.871Z,1509699533.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T08:58:53.873Z,1509699533.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:53.964Z,1509699533.964 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T08:58:53.965Z,1509699533.965 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T08:58:53.984Z,1509699533.984 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T08:58:54.090Z,1509699534.090 [Rowe_600LCM](INFO): Powering down
2017-11-03T08:58:54.250Z,1509699534.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:54.266Z,1509699534.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T08:58:54.267Z,1509699534.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:54.652Z,1509699534.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:54.667Z,1509699534.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T08:58:54.668Z,1509699534.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:55.049Z,1509699535.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:55.066Z,1509699535.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T08:58:55.068Z,1509699535.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:55.452Z,1509699535.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:55.467Z,1509699535.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T08:58:55.468Z,1509699535.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:55.837Z,1509699535.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:55.867Z,1509699535.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T08:58:55.868Z,1509699535.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:56.261Z,1509699536.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:56.277Z,1509699536.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T08:58:56.278Z,1509699536.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:56.665Z,1509699536.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:56.686Z,1509699536.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T08:58:56.687Z,1509699536.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:57.064Z,1509699537.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:57.079Z,1509699537.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T08:58:57.080Z,1509699537.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:57.449Z,1509699537.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:57.466Z,1509699537.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T08:58:57.468Z,1509699537.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:57.852Z,1509699537.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:57.866Z,1509699537.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T08:58:57.867Z,1509699537.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:58.252Z,1509699538.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:58.267Z,1509699538.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T08:58:58.268Z,1509699538.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:58.649Z,1509699538.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:58.680Z,1509699538.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T08:58:58.681Z,1509699538.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:59.064Z,1509699539.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:59.079Z,1509699539.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T08:58:59.080Z,1509699539.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:59.461Z,1509699539.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:59.476Z,1509699539.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T08:58:59.477Z,1509699539.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:58:59.863Z,1509699539.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:58:59.882Z,1509699539.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T08:58:59.883Z,1509699539.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:00.250Z,1509699540.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:00.290Z,1509699540.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T08:59:00.291Z,1509699540.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:00.643Z,1509699540.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:00.694Z,1509699540.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T08:59:00.695Z,1509699540.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:01.041Z,1509699541.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:01.069Z,1509699541.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T08:59:01.070Z,1509699541.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:01.444Z,1509699541.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:01.494Z,1509699541.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T08:59:01.495Z,1509699541.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:01.843Z,1509699541.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:01.868Z,1509699541.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T08:59:01.870Z,1509699541.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:02.259Z,1509699542.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:02.317Z,1509699542.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T08:59:02.319Z,1509699542.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:02.665Z,1509699542.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:02.721Z,1509699542.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T08:59:02.722Z,1509699542.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:03.065Z,1509699543.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:03.080Z,1509699543.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T08:59:03.081Z,1509699543.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:03.441Z,1509699543.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:03.471Z,1509699543.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T08:59:03.477Z,1509699543.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:03.843Z,1509699543.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:03.874Z,1509699543.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T08:59:03.875Z,1509699543.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:04.277Z,1509699544.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:04.298Z,1509699544.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T08:59:04.299Z,1509699544.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:04.642Z,1509699544.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:04.676Z,1509699544.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T08:59:04.678Z,1509699544.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:05.053Z,1509699545.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:05.077Z,1509699545.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T08:59:05.078Z,1509699545.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:05.454Z,1509699545.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:05.482Z,1509699545.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T08:59:05.483Z,1509699545.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:05.862Z,1509699545.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:05.879Z,1509699545.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T08:59:05.881Z,1509699545.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:06.238Z,1509699546.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:06.253Z,1509699546.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T08:59:06.255Z,1509699546.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:06.647Z,1509699546.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:06.670Z,1509699546.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T08:59:06.671Z,1509699546.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:07.041Z,1509699547.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:07.056Z,1509699547.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T08:59:07.057Z,1509699547.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:07.440Z,1509699547.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:07.455Z,1509699547.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T08:59:07.456Z,1509699547.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:07.840Z,1509699547.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:07.854Z,1509699547.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T08:59:07.855Z,1509699547.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:08.253Z,1509699548.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:08.278Z,1509699548.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T08:59:08.279Z,1509699548.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:08.653Z,1509699548.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:08.679Z,1509699548.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T08:59:08.680Z,1509699548.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:09.054Z,1509699549.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:09.077Z,1509699549.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T08:59:09.078Z,1509699549.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:09.440Z,1509699549.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:09.482Z,1509699549.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T08:59:09.483Z,1509699549.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:09.840Z,1509699549.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:09.854Z,1509699549.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T08:59:09.855Z,1509699549.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:10.241Z,1509699550.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:10.255Z,1509699550.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T08:59:10.257Z,1509699550.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:10.640Z,1509699550.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:10.658Z,1509699550.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T08:59:10.659Z,1509699550.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:11.053Z,1509699551.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:11.084Z,1509699551.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T08:59:11.085Z,1509699551.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:11.453Z,1509699551.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:11.484Z,1509699551.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T08:59:11.485Z,1509699551.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:11.857Z,1509699551.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:11.881Z,1509699551.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T08:59:11.882Z,1509699551.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:12.239Z,1509699552.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:12.254Z,1509699552.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T08:59:12.255Z,1509699552.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:12.640Z,1509699552.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:12.662Z,1509699552.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T08:59:12.663Z,1509699552.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:13.044Z,1509699553.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:13.059Z,1509699553.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T08:59:13.060Z,1509699553.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:13.440Z,1509699553.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:13.455Z,1509699553.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T08:59:13.456Z,1509699553.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:13.843Z,1509699553.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:13.859Z,1509699553.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:14.257Z,1509699554.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:14.289Z,1509699554.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:14.657Z,1509699554.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:14.711Z,1509699554.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:15.054Z,1509699555.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:15.105Z,1509699555.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:15.444Z,1509699555.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:15.459Z,1509699555.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:15.839Z,1509699555.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:15.888Z,1509699555.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:16.254Z,1509699556.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:16.289Z,1509699556.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:16.644Z,1509699556.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:16.698Z,1509699556.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:17.053Z,1509699557.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:17.106Z,1509699557.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:17.453Z,1509699557.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:17.488Z,1509699557.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:17.858Z,1509699557.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:17.888Z,1509699557.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:18.243Z,1509699558.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:18.258Z,1509699558.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:18.643Z,1509699558.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:18.658Z,1509699558.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:19.043Z,1509699559.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:19.058Z,1509699559.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:19.444Z,1509699559.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:19.458Z,1509699559.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:19.843Z,1509699559.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:19.858Z,1509699559.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:20.257Z,1509699560.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:20.289Z,1509699560.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:20.653Z,1509699560.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:20.667Z,1509699560.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:21.057Z,1509699561.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:21.088Z,1509699561.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:21.444Z,1509699561.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:21.459Z,1509699561.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:21.840Z,1509699561.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:21.854Z,1509699561.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:22.242Z,1509699562.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:22.257Z,1509699562.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:22.645Z,1509699562.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:22.660Z,1509699562.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:23.053Z,1509699563.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:23.090Z,1509699563.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:23.454Z,1509699563.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:23.481Z,1509699563.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:23.858Z,1509699563.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:23.889Z,1509699563.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:24.248Z,1509699564.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:24.263Z,1509699564.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:24.649Z,1509699564.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:24.671Z,1509699564.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:25.048Z,1509699565.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:25.063Z,1509699565.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:25.449Z,1509699565.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:25.464Z,1509699565.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:25.848Z,1509699565.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:25.863Z,1509699565.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:26.261Z,1509699566.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:26.291Z,1509699566.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:26.653Z,1509699566.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:26.690Z,1509699566.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:27.061Z,1509699567.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:27.091Z,1509699567.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:27.448Z,1509699567.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:27.463Z,1509699567.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:27.848Z,1509699567.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:27.863Z,1509699567.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:28.250Z,1509699568.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:28.265Z,1509699568.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:28.646Z,1509699568.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:28.665Z,1509699568.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:31.746Z,1509699571.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:31.830Z,1509699571.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:31.992Z,1509699571.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:32.027Z,1509699572.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:32.381Z,1509699572.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:32.410Z,1509699572.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:32.767Z,1509699572.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:32.819Z,1509699572.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:33.168Z,1509699573.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:33.183Z,1509699573.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:33.571Z,1509699573.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:33.627Z,1509699573.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:33.977Z,1509699573.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:34.030Z,1509699574.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:34.378Z,1509699574.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:34.412Z,1509699574.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:34.778Z,1509699574.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:34.809Z,1509699574.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:35.164Z,1509699575.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:35.179Z,1509699575.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:35.571Z,1509699575.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:35.591Z,1509699575.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:35.968Z,1509699575.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:35.991Z,1509699575.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:36.372Z,1509699576.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:36.387Z,1509699576.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:36.773Z,1509699576.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:36.789Z,1509699576.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:37.177Z,1509699577.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:37.193Z,1509699577.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:37.585Z,1509699577.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:37.626Z,1509699577.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:37.974Z,1509699577.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:37.989Z,1509699577.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:38.367Z,1509699578.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:38.382Z,1509699578.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:38.769Z,1509699578.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:38.784Z,1509699578.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:39.169Z,1509699579.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:39.185Z,1509699579.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:39.572Z,1509699579.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:39.587Z,1509699579.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:39.974Z,1509699579.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:39.989Z,1509699579.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:40.386Z,1509699580.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:40.427Z,1509699580.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:40.786Z,1509699580.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:40.816Z,1509699580.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:41.172Z,1509699581.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:41.187Z,1509699581.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:41.568Z,1509699581.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:41.584Z,1509699581.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:41.971Z,1509699581.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:41.987Z,1509699581.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:42.371Z,1509699582.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:42.386Z,1509699582.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:42.772Z,1509699582.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:42.833Z,1509699582.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:43.177Z,1509699583.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:43.217Z,1509699583.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:43.585Z,1509699583.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:43.620Z,1509699583.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:43.986Z,1509699583.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:44.019Z,1509699584.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:44.371Z,1509699584.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:44.385Z,1509699584.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:44.771Z,1509699584.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:44.786Z,1509699584.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:45.172Z,1509699585.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:45.187Z,1509699585.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:45.571Z,1509699585.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:45.586Z,1509699585.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:45.985Z,1509699585.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:46.063Z,1509699586.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:46.381Z,1509699586.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:46.396Z,1509699586.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:46.779Z,1509699586.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:46.794Z,1509699586.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:47.175Z,1509699587.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:47.226Z,1509699587.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:47.568Z,1509699587.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:47.583Z,1509699587.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:47.974Z,1509699587.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:48.023Z,1509699588.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:48.375Z,1509699588.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:48.430Z,1509699588.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:48.773Z,1509699588.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:48.818Z,1509699588.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:49.184Z,1509699589.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:49.199Z,1509699589.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:49.584Z,1509699589.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:49.599Z,1509699589.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:49.984Z,1509699589.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:49.999Z,1509699589.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:50.374Z,1509699590.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:50.389Z,1509699590.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:50.775Z,1509699590.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:50.790Z,1509699590.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:51.175Z,1509699591.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:51.195Z,1509699591.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:51.574Z,1509699591.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:51.594Z,1509699591.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:51.984Z,1509699591.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:52.003Z,1509699592.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:52.384Z,1509699592.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:52.403Z,1509699592.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:52.784Z,1509699592.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:52.798Z,1509699592.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:53.175Z,1509699593.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:53.190Z,1509699593.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:53.575Z,1509699593.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:53.607Z,1509699593.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:53.972Z,1509699593.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:53.994Z,1509699593.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:54.376Z,1509699594.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:54.391Z,1509699594.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:54.775Z,1509699594.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:54.795Z,1509699594.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:55.180Z,1509699595.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:55.203Z,1509699595.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:55.590Z,1509699595.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:55.605Z,1509699595.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:55.986Z,1509699595.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:56.001Z,1509699596.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:56.367Z,1509699596.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:56.398Z,1509699596.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:56.768Z,1509699596.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:56.797Z,1509699596.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:57.178Z,1509699597.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:57.193Z,1509699597.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:57.563Z,1509699597.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:57.594Z,1509699597.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:57.987Z,1509699597.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:58.004Z,1509699598.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:58.389Z,1509699598.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:58.408Z,1509699598.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:58.786Z,1509699598.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:58.800Z,1509699598.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:59.165Z,1509699599.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:59.192Z,1509699599.192 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:59.192Z,1509699599.192 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 175
2017-11-03T08:59:59.192Z,1509699599.192 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T08:59:59.194Z,1509699599.194 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:59.194Z,1509699599.194 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 175
2017-11-03T08:59:59.194Z,1509699599.194 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T08:59:59.196Z,1509699599.196 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T08:59:59.197Z,1509699599.197 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 175
2017-11-03T08:59:59.197Z,1509699599.197 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T08:59:59.281Z,1509699599.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T08:59:59.281Z,1509699599.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T08:59:59.281Z,1509699599.281 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T08:59:59.563Z,1509699599.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T08:59:59.688Z,1509699599.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T08:59:59.688Z,1509699599.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 175
2017-11-03T08:59:59.689Z,1509699599.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T08:59:59.689Z,1509699599.689 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 175
2017-11-03T08:59:59.689Z,1509699599.689 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T08:59:59.690Z,1509699599.690 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 175
2017-11-03T08:59:59.967Z,1509699599.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:00.001Z,1509699600.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:00:00.002Z,1509699600.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:00:00.002Z,1509699600.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:00:00.002Z,1509699600.002 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:00:00.003Z,1509699600.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:00:00.003Z,1509699600.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:00:00.003Z,1509699600.003 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:00:00.004Z,1509699600.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:00:00.004Z,1509699600.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:00:00.372Z,1509699600.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:00.430Z,1509699600.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:00:00.431Z,1509699600.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:00.764Z,1509699600.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:00.825Z,1509699600.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:00:00.826Z,1509699600.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:01.181Z,1509699601.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:01.211Z,1509699601.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:00:01.212Z,1509699601.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:01.581Z,1509699601.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:01.615Z,1509699601.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:00:01.615Z,1509699601.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:01.982Z,1509699601.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:02.038Z,1509699602.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:00:02.039Z,1509699602.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:02.363Z,1509699602.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:02.377Z,1509699602.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:00:02.378Z,1509699602.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:02.768Z,1509699602.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:02.834Z,1509699602.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:00:02.834Z,1509699602.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:03.164Z,1509699603.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:03.179Z,1509699603.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:00:03.180Z,1509699603.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:03.563Z,1509699603.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:03.607Z,1509699603.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:00:03.608Z,1509699603.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:03.981Z,1509699603.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:04.006Z,1509699604.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:00:04.007Z,1509699604.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:04.385Z,1509699604.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:04.415Z,1509699604.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:00:04.416Z,1509699604.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:04.777Z,1509699604.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:04.806Z,1509699604.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:00:04.807Z,1509699604.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:05.168Z,1509699605.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:05.186Z,1509699605.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:00:05.187Z,1509699605.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:05.568Z,1509699605.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:05.586Z,1509699605.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:00:05.587Z,1509699605.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:05.967Z,1509699605.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:05.981Z,1509699605.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:00:05.982Z,1509699605.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:06.368Z,1509699606.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:06.383Z,1509699606.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:00:06.384Z,1509699606.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:06.766Z,1509699606.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:06.789Z,1509699606.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:00:06.790Z,1509699606.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:07.185Z,1509699607.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:07.199Z,1509699607.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:00:07.220Z,1509699607.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:07.577Z,1509699607.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:07.592Z,1509699607.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T09:00:07.593Z,1509699607.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:07.976Z,1509699607.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:07.992Z,1509699607.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T09:00:07.993Z,1509699607.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:08.372Z,1509699608.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:08.386Z,1509699608.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:00:08.387Z,1509699608.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:08.773Z,1509699608.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:08.787Z,1509699608.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:00:08.789Z,1509699608.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:09.170Z,1509699609.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:09.184Z,1509699609.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:00:09.185Z,1509699609.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:09.573Z,1509699609.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:09.587Z,1509699609.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:00:09.589Z,1509699609.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:09.977Z,1509699609.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:09.992Z,1509699609.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:00:09.993Z,1509699609.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:10.350Z,1509699610.350 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T09:00:10.350Z,1509699610.350 [NAL9602] Data Fault, FailCount= 3
2017-11-03T09:00:10.350Z,1509699610.350 [NAL9602](ERROR): Data Fault
2017-11-03T09:00:10.386Z,1509699610.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:10.400Z,1509699610.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T09:00:10.401Z,1509699610.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:10.493Z,1509699610.493 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T09:00:10.750Z,1509699610.750 [NAL9602](INFO): Powering down
2017-11-03T09:00:10.781Z,1509699610.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:10.795Z,1509699610.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T09:00:10.796Z,1509699610.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:11.173Z,1509699611.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:11.187Z,1509699611.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:00:11.188Z,1509699611.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:11.574Z,1509699611.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:11.589Z,1509699611.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:00:11.590Z,1509699611.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:11.676Z,1509699611.676 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T09:00:11.676Z,1509699611.676 [NAL9602] No Fault, FailCount= 3
2017-11-03T09:00:11.971Z,1509699611.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:11.985Z,1509699611.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:00:11.986Z,1509699611.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:12.373Z,1509699612.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:12.388Z,1509699612.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:00:12.389Z,1509699612.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:12.774Z,1509699612.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:12.789Z,1509699612.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:00:12.790Z,1509699612.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:13.176Z,1509699613.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:13.190Z,1509699613.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:00:13.191Z,1509699613.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:13.575Z,1509699613.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:13.594Z,1509699613.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:00:13.595Z,1509699613.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:13.972Z,1509699613.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:13.987Z,1509699613.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:00:13.989Z,1509699613.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:14.375Z,1509699614.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:14.390Z,1509699614.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:00:14.392Z,1509699614.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:14.773Z,1509699614.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:14.788Z,1509699614.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:00:14.789Z,1509699614.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:15.172Z,1509699615.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:15.187Z,1509699615.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:00:15.188Z,1509699615.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:15.575Z,1509699615.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:15.647Z,1509699615.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T09:00:15.648Z,1509699615.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:15.974Z,1509699615.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:15.998Z,1509699615.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:00:15.999Z,1509699615.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:16.371Z,1509699616.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:16.432Z,1509699616.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:00:16.433Z,1509699616.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:16.776Z,1509699616.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:16.790Z,1509699616.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:00:16.791Z,1509699616.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:17.157Z,1509699617.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:17.217Z,1509699617.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:00:17.218Z,1509699617.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:17.575Z,1509699617.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:17.630Z,1509699617.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:00:17.631Z,1509699617.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:17.976Z,1509699617.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:17.990Z,1509699617.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:00:17.991Z,1509699617.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:18.371Z,1509699618.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:18.387Z,1509699618.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:00:18.388Z,1509699618.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:18.771Z,1509699618.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:18.787Z,1509699618.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:00:18.788Z,1509699618.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:19.174Z,1509699619.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:19.189Z,1509699619.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T09:00:19.190Z,1509699619.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:19.574Z,1509699619.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:19.589Z,1509699619.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:19.972Z,1509699619.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:19.987Z,1509699619.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:20.374Z,1509699620.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:20.388Z,1509699620.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:20.760Z,1509699620.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:20.784Z,1509699620.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:21.172Z,1509699621.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:21.187Z,1509699621.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:21.560Z,1509699621.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:21.584Z,1509699621.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:21.974Z,1509699621.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:21.988Z,1509699621.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:22.372Z,1509699622.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:22.387Z,1509699622.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:22.760Z,1509699622.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:22.785Z,1509699622.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:23.160Z,1509699623.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:23.184Z,1509699623.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:23.572Z,1509699623.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:23.587Z,1509699623.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:23.974Z,1509699623.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:23.988Z,1509699623.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:24.374Z,1509699624.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:24.388Z,1509699624.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:24.772Z,1509699624.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:24.795Z,1509699624.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:25.174Z,1509699625.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:25.194Z,1509699625.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:25.574Z,1509699625.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:25.589Z,1509699625.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:25.964Z,1509699625.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:25.979Z,1509699625.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:26.367Z,1509699626.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:26.382Z,1509699626.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:26.763Z,1509699626.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:26.777Z,1509699626.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:27.167Z,1509699627.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:27.203Z,1509699627.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:27.563Z,1509699627.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:27.578Z,1509699627.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:27.966Z,1509699627.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:27.986Z,1509699627.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:28.367Z,1509699628.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:28.387Z,1509699628.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:28.771Z,1509699628.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:28.786Z,1509699628.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:31.873Z,1509699631.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:31.958Z,1509699631.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:32.091Z,1509699632.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:32.123Z,1509699632.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:32.489Z,1509699632.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:32.543Z,1509699632.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:32.890Z,1509699632.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:32.915Z,1509699632.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:33.293Z,1509699633.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:33.357Z,1509699633.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:33.694Z,1509699633.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:33.744Z,1509699633.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:34.095Z,1509699634.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:34.120Z,1509699634.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:34.492Z,1509699634.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:34.524Z,1509699634.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:34.894Z,1509699634.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:34.919Z,1509699634.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:35.294Z,1509699635.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:35.320Z,1509699635.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:35.692Z,1509699635.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:35.723Z,1509699635.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:36.094Z,1509699636.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:36.119Z,1509699636.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:36.494Z,1509699636.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:36.519Z,1509699636.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:36.892Z,1509699636.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:36.923Z,1509699636.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:37.294Z,1509699637.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:37.320Z,1509699637.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:37.694Z,1509699637.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:37.719Z,1509699637.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:38.092Z,1509699638.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:38.119Z,1509699638.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:38.494Z,1509699638.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:38.520Z,1509699638.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:38.894Z,1509699638.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:38.919Z,1509699638.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:39.292Z,1509699639.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:39.323Z,1509699639.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:39.694Z,1509699639.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:39.719Z,1509699639.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:40.094Z,1509699640.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:40.119Z,1509699640.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:40.492Z,1509699640.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:40.523Z,1509699640.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:40.878Z,1509699640.878 [NAL9602](INFO): Powering up NAL9602
2017-11-03T09:00:40.895Z,1509699640.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:40.930Z,1509699640.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:41.288Z,1509699641.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:41.318Z,1509699641.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:41.695Z,1509699641.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:41.721Z,1509699641.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:42.094Z,1509699642.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:42.119Z,1509699642.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:42.494Z,1509699642.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:42.520Z,1509699642.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:42.893Z,1509699642.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:42.923Z,1509699642.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:43.295Z,1509699643.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:43.320Z,1509699643.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:43.694Z,1509699643.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:43.720Z,1509699643.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:44.093Z,1509699644.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:44.121Z,1509699644.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:44.494Z,1509699644.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:44.520Z,1509699644.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:44.892Z,1509699644.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:44.917Z,1509699644.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:45.292Z,1509699645.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:45.366Z,1509699645.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:45.694Z,1509699645.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:45.719Z,1509699645.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:46.094Z,1509699646.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:46.120Z,1509699646.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:46.492Z,1509699646.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:46.551Z,1509699646.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:46.892Z,1509699646.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:46.928Z,1509699646.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:47.294Z,1509699647.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:47.339Z,1509699647.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:47.692Z,1509699647.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:47.723Z,1509699647.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:48.091Z,1509699648.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:48.143Z,1509699648.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:48.495Z,1509699648.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:48.543Z,1509699648.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:48.893Z,1509699648.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:48.924Z,1509699648.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:49.295Z,1509699649.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:49.310Z,1509699649.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:49.692Z,1509699649.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:49.707Z,1509699649.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:50.093Z,1509699650.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:50.109Z,1509699650.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:50.492Z,1509699650.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:50.507Z,1509699650.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:50.892Z,1509699650.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:50.907Z,1509699650.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:51.292Z,1509699651.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:51.307Z,1509699651.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:51.705Z,1509699651.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:51.734Z,1509699651.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:52.076Z,1509699652.076 [NAL9602](INFO): NAL9602 initialized
2017-11-03T09:00:52.093Z,1509699652.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:52.108Z,1509699652.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:52.492Z,1509699652.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:52.514Z,1509699652.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:52.905Z,1509699652.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:52.940Z,1509699652.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:53.306Z,1509699653.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:53.339Z,1509699653.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:53.692Z,1509699653.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:53.711Z,1509699653.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:54.099Z,1509699654.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:54.114Z,1509699654.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:54.491Z,1509699654.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:54.507Z,1509699654.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:54.892Z,1509699654.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:54.907Z,1509699654.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:55.291Z,1509699655.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:55.306Z,1509699655.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:55.705Z,1509699655.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:55.737Z,1509699655.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:56.106Z,1509699656.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:56.138Z,1509699656.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:56.505Z,1509699656.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:56.537Z,1509699656.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:56.891Z,1509699656.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:56.911Z,1509699656.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:57.292Z,1509699657.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:57.315Z,1509699657.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:57.692Z,1509699657.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:57.714Z,1509699657.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:58.092Z,1509699658.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:58.107Z,1509699658.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:58.510Z,1509699658.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:58.534Z,1509699658.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:58.905Z,1509699658.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:58.937Z,1509699658.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:59.309Z,1509699659.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:59.335Z,1509699659.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:00:59.692Z,1509699659.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:00:59.707Z,1509699659.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:00.092Z,1509699660.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:00.144Z,1509699660.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:00.492Z,1509699660.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:00.507Z,1509699660.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:00.896Z,1509699660.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:00.954Z,1509699660.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:01.300Z,1509699661.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:01.314Z,1509699661.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:01.713Z,1509699661.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:01.742Z,1509699661.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:02.105Z,1509699662.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:02.159Z,1509699662.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:02.505Z,1509699662.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:02.523Z,1509699662.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:02.903Z,1509699662.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:02.959Z,1509699662.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:03.309Z,1509699663.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:03.359Z,1509699663.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:03.708Z,1509699663.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:03.724Z,1509699663.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:04.107Z,1509699664.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:04.130Z,1509699664.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:04.546Z,1509699664.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:04.567Z,1509699664.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:04.912Z,1509699664.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:04.959Z,1509699664.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:05.306Z,1509699665.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:05.352Z,1509699665.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:05.692Z,1509699665.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:05.728Z,1509699665.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:06.113Z,1509699666.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:06.128Z,1509699666.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:06.491Z,1509699666.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:06.549Z,1509699666.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:06.892Z,1509699666.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:06.939Z,1509699666.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:07.319Z,1509699667.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:07.407Z,1509699667.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:07.714Z,1509699667.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:07.739Z,1509699667.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:08.126Z,1509699668.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:08.169Z,1509699668.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:08.516Z,1509699668.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:08.559Z,1509699668.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:08.904Z,1509699668.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:08.959Z,1509699668.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:09.302Z,1509699669.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:09.323Z,1509699669.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:09.724Z,1509699669.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:09.769Z,1509699669.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:10.103Z,1509699670.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:10.131Z,1509699670.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:10.510Z,1509699670.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:10.535Z,1509699670.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:10.915Z,1509699670.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:10.983Z,1509699670.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:11.320Z,1509699671.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:11.361Z,1509699671.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:11.718Z,1509699671.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:11.768Z,1509699671.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:12.102Z,1509699672.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:12.157Z,1509699672.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:12.503Z,1509699672.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:12.559Z,1509699672.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:12.931Z,1509699672.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:12.979Z,1509699672.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:13.302Z,1509699673.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:13.326Z,1509699673.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:13.712Z,1509699673.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:13.736Z,1509699673.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:14.114Z,1509699674.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:14.131Z,1509699674.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:14.515Z,1509699674.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:14.574Z,1509699674.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:14.893Z,1509699674.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:14.919Z,1509699674.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:15.323Z,1509699675.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:15.419Z,1509699675.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:15.694Z,1509699675.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:15.713Z,1509699675.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:16.093Z,1509699676.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:16.141Z,1509699676.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:16.503Z,1509699676.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:16.562Z,1509699676.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:16.907Z,1509699676.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:16.949Z,1509699676.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:17.304Z,1509699677.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:17.359Z,1509699677.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:17.692Z,1509699677.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:17.747Z,1509699677.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:18.093Z,1509699678.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:18.150Z,1509699678.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:18.493Z,1509699678.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:18.538Z,1509699678.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:18.893Z,1509699678.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:18.939Z,1509699678.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:19.294Z,1509699679.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:19.346Z,1509699679.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:19.711Z,1509699679.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:19.735Z,1509699679.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:20.114Z,1509699680.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:20.143Z,1509699680.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:20.518Z,1509699680.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:20.533Z,1509699680.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:20.902Z,1509699680.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:20.919Z,1509699680.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:21.303Z,1509699681.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:21.319Z,1509699681.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:21.702Z,1509699681.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:21.717Z,1509699681.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:22.103Z,1509699682.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:22.123Z,1509699682.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:22.513Z,1509699682.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:22.528Z,1509699682.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:22.913Z,1509699682.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:22.934Z,1509699682.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:23.313Z,1509699683.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:23.328Z,1509699683.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:23.703Z,1509699683.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:23.719Z,1509699683.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:24.102Z,1509699684.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:24.123Z,1509699684.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:24.503Z,1509699684.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:24.523Z,1509699684.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:24.892Z,1509699684.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:24.918Z,1509699684.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:25.302Z,1509699685.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:25.318Z,1509699685.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:25.714Z,1509699685.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:25.735Z,1509699685.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:26.113Z,1509699686.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:26.135Z,1509699686.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:26.513Z,1509699686.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:26.528Z,1509699686.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:26.901Z,1509699686.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:26.921Z,1509699686.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:27.304Z,1509699687.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:27.320Z,1509699687.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:27.703Z,1509699687.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:27.718Z,1509699687.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:28.104Z,1509699688.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:28.123Z,1509699688.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:28.127Z,1509699688.127 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T09:01:28.127Z,1509699688.127 [Default:CheckIn:C.Wait] Stopped
2017-11-03T09:01:28.127Z,1509699688.127 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T09:01:28.127Z,1509699688.127 [Default:CheckIn:D] Running Loop=1
2017-11-03T09:01:28.512Z,1509699688.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:28.533Z,1509699688.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:28.537Z,1509699688.537 [Default:CheckIn:D] Stopped
2017-11-03T09:01:28.537Z,1509699688.537 [Default:CheckIn:E] Running Loop=1
2017-11-03T09:01:28.918Z,1509699688.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:28.938Z,1509699688.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:28.942Z,1509699688.942 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 526.349512 min 
2017-11-03T09:01:28.942Z,1509699688.942 [Default:CheckIn:E] Stopped
2017-11-03T09:01:28.942Z,1509699688.942 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T09:01:28.942Z,1509699688.942 [Default:CheckIn] Stopped
2017-11-03T09:01:28.942Z,1509699688.942 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T09:01:28.942Z,1509699688.942 [Default:CheckIn](INFO): Running loop #52
2017-11-03T09:01:28.943Z,1509699688.943 [Default:CheckIn] Running Loop=52
2017-11-03T09:01:28.943Z,1509699688.943 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T09:01:28.943Z,1509699688.943 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T09:01:32.001Z,1509699692.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:32.087Z,1509699692.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:32.235Z,1509699692.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:32.250Z,1509699692.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:32.632Z,1509699692.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:32.690Z,1509699692.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:33.032Z,1509699693.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:33.051Z,1509699693.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:33.445Z,1509699693.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:33.499Z,1509699693.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:33.845Z,1509699693.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:33.899Z,1509699693.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:34.245Z,1509699694.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:34.277Z,1509699694.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:34.628Z,1509699694.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:34.643Z,1509699694.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:35.033Z,1509699695.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:35.048Z,1509699695.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:35.432Z,1509699695.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:35.447Z,1509699695.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:35.845Z,1509699695.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:35.877Z,1509699695.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:36.245Z,1509699696.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:36.278Z,1509699696.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:36.634Z,1509699696.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:36.649Z,1509699696.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:37.028Z,1509699697.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:37.043Z,1509699697.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:37.433Z,1509699697.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:37.448Z,1509699697.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:37.829Z,1509699697.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:37.844Z,1509699697.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:38.232Z,1509699698.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:38.247Z,1509699698.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:38.645Z,1509699698.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:38.677Z,1509699698.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:39.045Z,1509699699.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:39.076Z,1509699699.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:39.445Z,1509699699.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:39.476Z,1509699699.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:39.833Z,1509699699.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:39.848Z,1509699699.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:40.229Z,1509699700.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:40.244Z,1509699700.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:40.629Z,1509699700.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:40.644Z,1509699700.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:41.034Z,1509699701.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:41.051Z,1509699701.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:41.431Z,1509699701.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:41.455Z,1509699701.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:41.838Z,1509699701.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:41.853Z,1509699701.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:42.237Z,1509699702.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:42.259Z,1509699702.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:42.646Z,1509699702.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:42.680Z,1509699702.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:43.026Z,1509699703.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:43.045Z,1509699703.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:43.432Z,1509699703.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:43.447Z,1509699703.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:43.836Z,1509699703.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:43.851Z,1509699703.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:44.233Z,1509699704.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:44.249Z,1509699704.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:44.638Z,1509699704.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:44.653Z,1509699704.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:45.042Z,1509699705.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:45.057Z,1509699705.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:45.437Z,1509699705.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:45.453Z,1509699705.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:45.833Z,1509699705.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:45.894Z,1509699705.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:46.234Z,1509699706.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:46.255Z,1509699706.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:46.626Z,1509699706.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:46.651Z,1509699706.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:47.033Z,1509699707.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:47.049Z,1509699707.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:47.434Z,1509699707.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:47.449Z,1509699707.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:47.837Z,1509699707.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:47.853Z,1509699707.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:48.237Z,1509699708.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:48.252Z,1509699708.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:48.636Z,1509699708.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:48.655Z,1509699708.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:49.028Z,1509699709.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:49.036Z,1509699709.036 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:01:49.036Z,1509699709.036 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:01:49.036Z,1509699709.036 [BPC1](ERROR): Communications Fault
2017-11-03T09:01:49.044Z,1509699709.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:49.137Z,1509699709.137 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:01:49.436Z,1509699709.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:49.451Z,1509699709.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:49.844Z,1509699709.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:49.863Z,1509699709.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:50.228Z,1509699710.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:50.243Z,1509699710.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:50.333Z,1509699710.333 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:01:50.333Z,1509699710.333 [BPC1] No Fault, FailCount= 1
2017-11-03T09:01:50.666Z,1509699710.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:50.779Z,1509699710.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:51.041Z,1509699711.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:51.056Z,1509699711.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:51.440Z,1509699711.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:51.455Z,1509699711.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:51.836Z,1509699711.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:51.891Z,1509699711.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:52.228Z,1509699712.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:52.251Z,1509699712.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:52.635Z,1509699712.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:52.651Z,1509699712.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:53.036Z,1509699713.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:53.051Z,1509699713.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:53.440Z,1509699713.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:53.455Z,1509699713.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:53.840Z,1509699713.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:53.855Z,1509699713.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:54.241Z,1509699714.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:54.257Z,1509699714.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:54.629Z,1509699714.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:54.644Z,1509699714.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:55.033Z,1509699715.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:55.049Z,1509699715.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:55.437Z,1509699715.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:55.452Z,1509699715.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:55.841Z,1509699715.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:55.856Z,1509699715.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:56.241Z,1509699716.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:56.256Z,1509699716.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:56.642Z,1509699716.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:56.657Z,1509699716.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:56.741Z,1509699716.741 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T09:01:57.028Z,1509699717.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:57.044Z,1509699717.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:57.433Z,1509699717.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:57.449Z,1509699717.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:57.837Z,1509699717.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:57.852Z,1509699717.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:58.232Z,1509699718.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:58.247Z,1509699718.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:58.641Z,1509699718.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:58.657Z,1509699718.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:59.042Z,1509699719.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:59.058Z,1509699719.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:59.440Z,1509699719.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:59.463Z,1509699719.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:01:59.830Z,1509699719.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:01:59.931Z,1509699719.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:00.236Z,1509699720.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:00.251Z,1509699720.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:00.636Z,1509699720.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:00.651Z,1509699720.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:01.032Z,1509699721.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:01.048Z,1509699721.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:01.442Z,1509699721.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:01.457Z,1509699721.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:01.841Z,1509699721.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:01.863Z,1509699721.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:02.240Z,1509699722.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:02.256Z,1509699722.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:02.629Z,1509699722.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:02.664Z,1509699722.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:03.035Z,1509699723.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:03.050Z,1509699723.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:03.432Z,1509699723.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:03.447Z,1509699723.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:03.845Z,1509699723.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:03.860Z,1509699723.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:04.244Z,1509699724.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:04.295Z,1509699724.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:04.644Z,1509699724.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:04.659Z,1509699724.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:05.030Z,1509699725.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:05.067Z,1509699725.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:05.462Z,1509699725.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:05.514Z,1509699725.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:05.833Z,1509699725.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:05.850Z,1509699725.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:06.235Z,1509699726.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:06.250Z,1509699726.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:06.644Z,1509699726.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:06.659Z,1509699726.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:07.044Z,1509699727.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:07.059Z,1509699727.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:07.444Z,1509699727.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:07.459Z,1509699727.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:07.834Z,1509699727.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:07.855Z,1509699727.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:08.232Z,1509699728.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:08.247Z,1509699728.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:08.630Z,1509699728.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:08.645Z,1509699728.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:09.029Z,1509699729.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:09.044Z,1509699729.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:09.434Z,1509699729.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:09.449Z,1509699729.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:09.844Z,1509699729.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:09.859Z,1509699729.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:10.241Z,1509699730.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:10.256Z,1509699730.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:10.644Z,1509699730.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:10.659Z,1509699730.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:11.023Z,1509699731.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:11.058Z,1509699731.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:11.420Z,1509699731.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:11.435Z,1509699731.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:11.827Z,1509699731.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:11.858Z,1509699731.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:12.227Z,1509699732.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:12.258Z,1509699732.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:12.634Z,1509699732.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:12.667Z,1509699732.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:13.045Z,1509699733.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:13.061Z,1509699733.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:13.449Z,1509699733.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:13.464Z,1509699733.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:13.820Z,1509699733.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:13.835Z,1509699733.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:14.227Z,1509699734.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:14.258Z,1509699734.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:14.628Z,1509699734.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:14.658Z,1509699734.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:15.023Z,1509699735.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:15.058Z,1509699735.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:15.436Z,1509699735.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:15.462Z,1509699735.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:15.864Z,1509699735.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:15.936Z,1509699735.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:16.237Z,1509699736.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:16.313Z,1509699736.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:16.625Z,1509699736.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:16.639Z,1509699736.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:17.028Z,1509699737.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:17.068Z,1509699737.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:17.424Z,1509699737.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:17.478Z,1509699737.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:17.833Z,1509699737.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:17.861Z,1509699737.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:18.237Z,1509699738.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:18.279Z,1509699738.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:18.641Z,1509699738.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:18.666Z,1509699738.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:19.029Z,1509699739.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:19.083Z,1509699739.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:19.431Z,1509699739.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:19.475Z,1509699739.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:19.829Z,1509699739.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:19.844Z,1509699739.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:20.228Z,1509699740.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:20.243Z,1509699740.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:20.646Z,1509699740.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:20.674Z,1509699740.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:21.046Z,1509699741.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:21.079Z,1509699741.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:21.442Z,1509699741.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:21.466Z,1509699741.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:21.829Z,1509699741.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:21.845Z,1509699741.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:22.224Z,1509699742.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:22.239Z,1509699742.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:22.628Z,1509699742.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:22.671Z,1509699742.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:23.023Z,1509699743.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:23.038Z,1509699743.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:23.441Z,1509699743.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:23.466Z,1509699743.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:23.842Z,1509699743.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:23.865Z,1509699743.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:24.237Z,1509699744.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:24.269Z,1509699744.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:24.628Z,1509699744.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:24.643Z,1509699744.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:25.028Z,1509699745.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:25.043Z,1509699745.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:25.441Z,1509699745.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:25.467Z,1509699745.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:25.845Z,1509699745.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:25.875Z,1509699745.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:26.242Z,1509699746.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:26.265Z,1509699746.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:26.631Z,1509699746.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:26.646Z,1509699746.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:27.031Z,1509699747.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:27.070Z,1509699747.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:27.442Z,1509699747.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:27.465Z,1509699747.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:27.845Z,1509699747.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:27.874Z,1509699747.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:28.241Z,1509699748.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:28.266Z,1509699748.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:28.632Z,1509699748.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:28.647Z,1509699748.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:29.027Z,1509699749.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:29.046Z,1509699749.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:32.138Z,1509699752.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:32.195Z,1509699752.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:32.354Z,1509699752.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:32.386Z,1509699752.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:32.757Z,1509699752.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:32.773Z,1509699752.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:33.134Z,1509699753.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:33.157Z,1509699753.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:33.535Z,1509699753.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:33.566Z,1509699753.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:33.931Z,1509699753.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:33.962Z,1509699753.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:34.332Z,1509699754.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:34.367Z,1509699754.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:34.753Z,1509699754.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:34.762Z,1509699754.762 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:02:34.762Z,1509699754.762 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:02:34.762Z,1509699754.762 [BPC1](ERROR): Communications Fault
2017-11-03T09:02:34.770Z,1509699754.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:34.877Z,1509699754.877 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:02:35.158Z,1509699755.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:35.173Z,1509699755.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:35.545Z,1509699755.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:35.579Z,1509699755.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:35.932Z,1509699755.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:35.947Z,1509699755.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:36.045Z,1509699756.045 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:02:36.045Z,1509699756.045 [BPC1] No Fault, FailCount= 1
2017-11-03T09:02:36.332Z,1509699756.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:36.415Z,1509699756.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:36.734Z,1509699756.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:36.749Z,1509699756.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:37.132Z,1509699757.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:37.147Z,1509699757.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:37.545Z,1509699757.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:37.577Z,1509699757.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:37.945Z,1509699757.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:37.977Z,1509699757.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:38.346Z,1509699758.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:38.376Z,1509699758.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:38.732Z,1509699758.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:38.746Z,1509699758.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:39.132Z,1509699759.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:39.148Z,1509699759.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:39.532Z,1509699759.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:39.547Z,1509699759.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:39.932Z,1509699759.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:39.947Z,1509699759.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:40.332Z,1509699760.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:40.347Z,1509699760.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:40.745Z,1509699760.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:40.777Z,1509699760.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:41.145Z,1509699761.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:41.188Z,1509699761.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:41.545Z,1509699761.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:41.576Z,1509699761.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:41.936Z,1509699761.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:41.959Z,1509699761.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:42.337Z,1509699762.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:42.352Z,1509699762.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:42.739Z,1509699762.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:42.759Z,1509699762.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:43.137Z,1509699763.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:43.152Z,1509699763.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:43.549Z,1509699763.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:43.579Z,1509699763.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:43.949Z,1509699763.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:43.984Z,1509699763.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:44.354Z,1509699764.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:44.384Z,1509699764.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:44.737Z,1509699764.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:44.752Z,1509699764.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:45.137Z,1509699765.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:45.152Z,1509699765.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:45.536Z,1509699765.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:45.551Z,1509699765.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:45.937Z,1509699765.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:45.953Z,1509699765.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:46.336Z,1509699766.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:46.351Z,1509699766.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:46.754Z,1509699766.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:46.783Z,1509699766.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:47.149Z,1509699767.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:47.164Z,1509699767.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:47.550Z,1509699767.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:47.583Z,1509699767.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:47.936Z,1509699767.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:47.951Z,1509699767.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:48.336Z,1509699768.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:48.351Z,1509699768.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:48.737Z,1509699768.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:48.753Z,1509699768.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:49.136Z,1509699769.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:49.155Z,1509699769.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:49.548Z,1509699769.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:49.564Z,1509699769.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:49.949Z,1509699769.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:49.981Z,1509699769.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:50.346Z,1509699770.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:50.361Z,1509699770.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:50.739Z,1509699770.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:50.754Z,1509699770.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:51.140Z,1509699771.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:51.155Z,1509699771.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:51.538Z,1509699771.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:51.554Z,1509699771.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:51.940Z,1509699771.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:52.024Z,1509699772.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:52.336Z,1509699772.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:52.359Z,1509699772.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:52.746Z,1509699772.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:52.941Z,1509699772.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:53.145Z,1509699773.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:53.159Z,1509699773.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:53.546Z,1509699773.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:53.591Z,1509699773.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:53.940Z,1509699773.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:53.990Z,1509699773.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:54.337Z,1509699774.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:54.351Z,1509699774.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:54.742Z,1509699774.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:54.763Z,1509699774.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:55.141Z,1509699775.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:55.156Z,1509699775.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:55.549Z,1509699775.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:55.564Z,1509699775.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:55.944Z,1509699775.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:55.963Z,1509699775.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:56.345Z,1509699776.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:56.367Z,1509699776.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:56.737Z,1509699776.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:56.751Z,1509699776.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:57.142Z,1509699777.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:57.157Z,1509699777.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:57.541Z,1509699777.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:57.556Z,1509699777.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:57.943Z,1509699777.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:57.957Z,1509699777.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:58.342Z,1509699778.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:58.357Z,1509699778.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:58.744Z,1509699778.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:58.759Z,1509699778.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:59.149Z,1509699779.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:59.163Z,1509699779.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:59.544Z,1509699779.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:59.563Z,1509699779.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:02:59.938Z,1509699779.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:02:59.953Z,1509699779.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:00.343Z,1509699780.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:00.358Z,1509699780.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:00.358Z,1509699780.358 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 176
2017-11-03T09:03:00.358Z,1509699780.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:03:00.360Z,1509699780.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:00.360Z,1509699780.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 176
2017-11-03T09:03:00.360Z,1509699780.360 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:03:00.362Z,1509699780.362 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:00.362Z,1509699780.362 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 176
2017-11-03T09:03:00.362Z,1509699780.362 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:03:00.473Z,1509699780.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:03:00.473Z,1509699780.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:03:00.473Z,1509699780.473 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:03:00.743Z,1509699780.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:00.848Z,1509699780.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:03:00.848Z,1509699780.848 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 176
2017-11-03T09:03:00.849Z,1509699780.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:03:00.849Z,1509699780.849 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 176
2017-11-03T09:03:00.849Z,1509699780.849 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:03:00.849Z,1509699780.849 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 176
2017-11-03T09:03:01.139Z,1509699781.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:01.153Z,1509699781.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:03:01.153Z,1509699781.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:03:01.153Z,1509699781.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:03:01.154Z,1509699781.154 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:03:01.154Z,1509699781.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:03:01.154Z,1509699781.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:03:01.155Z,1509699781.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:03:01.155Z,1509699781.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:03:01.155Z,1509699781.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:03:01.552Z,1509699781.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:01.570Z,1509699781.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:03:01.571Z,1509699781.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:01.956Z,1509699781.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:01.978Z,1509699781.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:03:01.979Z,1509699781.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:02.353Z,1509699782.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:02.368Z,1509699782.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:03:02.369Z,1509699782.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:02.743Z,1509699782.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:02.758Z,1509699782.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:03:02.759Z,1509699782.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:03.141Z,1509699783.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:03.162Z,1509699783.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:03:03.163Z,1509699783.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:03.540Z,1509699783.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:03.558Z,1509699783.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:03:03.559Z,1509699783.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:03.944Z,1509699783.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:03.958Z,1509699783.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:03:03.959Z,1509699783.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:04.331Z,1509699784.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:04.356Z,1509699784.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:03:04.357Z,1509699784.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:04.753Z,1509699784.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:04.841Z,1509699784.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T09:03:04.842Z,1509699784.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:05.149Z,1509699785.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:05.164Z,1509699785.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:03:05.165Z,1509699785.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:05.553Z,1509699785.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:05.613Z,1509699785.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T09:03:05.614Z,1509699785.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:05.942Z,1509699785.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:05.962Z,1509699785.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:03:05.963Z,1509699785.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:06.328Z,1509699786.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:06.379Z,1509699786.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:03:06.380Z,1509699786.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:06.729Z,1509699786.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:06.796Z,1509699786.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:03:06.797Z,1509699786.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:07.141Z,1509699787.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:07.160Z,1509699787.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:03:07.161Z,1509699787.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:07.558Z,1509699787.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:07.578Z,1509699787.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:03:07.579Z,1509699787.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:07.955Z,1509699787.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:07.974Z,1509699787.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:03:07.975Z,1509699787.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:08.353Z,1509699788.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:08.368Z,1509699788.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:03:08.369Z,1509699788.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:08.728Z,1509699788.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:08.753Z,1509699788.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T09:03:08.754Z,1509699788.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:09.143Z,1509699789.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:09.176Z,1509699789.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T09:03:09.177Z,1509699789.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:09.536Z,1509699789.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:09.554Z,1509699789.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:03:09.555Z,1509699789.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:09.932Z,1509699789.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:09.946Z,1509699789.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:03:09.947Z,1509699789.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:10.331Z,1509699790.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:10.346Z,1509699790.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:03:10.347Z,1509699790.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:10.753Z,1509699790.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:10.784Z,1509699790.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:03:10.785Z,1509699790.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:11.149Z,1509699791.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:11.163Z,1509699791.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:03:11.164Z,1509699791.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:11.549Z,1509699791.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:11.564Z,1509699791.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T09:03:11.586Z,1509699791.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:11.936Z,1509699791.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:11.954Z,1509699791.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T09:03:11.955Z,1509699791.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:12.335Z,1509699792.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:12.349Z,1509699792.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:03:12.350Z,1509699792.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:12.736Z,1509699792.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:12.751Z,1509699792.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:03:12.752Z,1509699792.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:13.136Z,1509699793.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:13.151Z,1509699793.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:03:13.152Z,1509699793.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:13.549Z,1509699793.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:13.563Z,1509699793.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:03:13.585Z,1509699793.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:13.953Z,1509699793.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:13.968Z,1509699793.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:03:13.985Z,1509699793.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:14.346Z,1509699794.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:14.361Z,1509699794.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:03:14.362Z,1509699794.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:14.742Z,1509699794.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:14.762Z,1509699794.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:03:14.763Z,1509699794.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:15.142Z,1509699795.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:15.162Z,1509699795.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:03:15.163Z,1509699795.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:15.542Z,1509699795.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:15.562Z,1509699795.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:03:15.563Z,1509699795.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:15.944Z,1509699795.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:15.966Z,1509699795.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:03:15.967Z,1509699795.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:16.343Z,1509699796.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:16.358Z,1509699796.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:03:16.359Z,1509699796.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:16.748Z,1509699796.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:16.762Z,1509699796.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:03:16.763Z,1509699796.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:17.149Z,1509699797.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:17.217Z,1509699797.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T09:03:17.218Z,1509699797.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:17.548Z,1509699797.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:17.602Z,1509699797.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:03:17.602Z,1509699797.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:17.943Z,1509699797.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:17.958Z,1509699797.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:03:17.959Z,1509699797.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:18.343Z,1509699798.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:18.357Z,1509699798.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:03:18.358Z,1509699798.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:18.743Z,1509699798.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:18.798Z,1509699798.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:03:18.799Z,1509699798.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:19.142Z,1509699799.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:19.156Z,1509699799.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:03:19.157Z,1509699799.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:19.550Z,1509699799.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:19.595Z,1509699799.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:03:19.596Z,1509699799.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:19.949Z,1509699799.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:20.006Z,1509699800.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:03:20.007Z,1509699800.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:20.354Z,1509699800.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:20.369Z,1509699800.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:20.728Z,1509699800.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:20.751Z,1509699800.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:21.135Z,1509699801.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:21.161Z,1509699801.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:21.532Z,1509699801.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:21.562Z,1509699801.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:21.930Z,1509699801.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:21.963Z,1509699801.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:22.329Z,1509699802.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:22.360Z,1509699802.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:22.754Z,1509699802.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:22.769Z,1509699802.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:23.158Z,1509699803.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:23.173Z,1509699803.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:23.542Z,1509699803.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:23.575Z,1509699803.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:23.939Z,1509699803.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:23.968Z,1509699803.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:24.331Z,1509699804.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:24.346Z,1509699804.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:24.734Z,1509699804.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:24.762Z,1509699804.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:25.132Z,1509699805.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:25.147Z,1509699805.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:25.545Z,1509699805.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:25.575Z,1509699805.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:25.941Z,1509699805.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:25.977Z,1509699805.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:26.346Z,1509699806.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:26.372Z,1509699806.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:26.733Z,1509699806.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:26.748Z,1509699806.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:27.136Z,1509699807.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:27.151Z,1509699807.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:27.534Z,1509699807.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:27.569Z,1509699807.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:27.944Z,1509699807.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:27.958Z,1509699807.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:28.342Z,1509699808.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:28.358Z,1509699808.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:28.745Z,1509699808.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:28.761Z,1509699808.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:29.150Z,1509699809.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:29.170Z,1509699809.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:32.242Z,1509699812.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:32.319Z,1509699812.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:32.454Z,1509699812.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:32.470Z,1509699812.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:32.851Z,1509699812.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:32.871Z,1509699812.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:33.253Z,1509699813.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:33.303Z,1509699813.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:33.661Z,1509699813.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:33.692Z,1509699813.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:34.062Z,1509699814.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:34.114Z,1509699814.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:34.462Z,1509699814.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:34.515Z,1509699814.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:34.850Z,1509699814.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:34.866Z,1509699814.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:35.248Z,1509699815.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:35.264Z,1509699815.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:35.652Z,1509699815.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:35.668Z,1509699815.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:36.044Z,1509699816.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:36.059Z,1509699816.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:36.464Z,1509699816.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:36.486Z,1509699816.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:36.866Z,1509699816.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:36.882Z,1509699816.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:37.266Z,1509699817.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:37.281Z,1509699817.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:37.646Z,1509699817.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:37.673Z,1509699817.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:38.043Z,1509699818.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:38.079Z,1509699818.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:38.465Z,1509699818.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:38.481Z,1509699818.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:38.867Z,1509699818.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:38.882Z,1509699818.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:39.266Z,1509699819.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:39.281Z,1509699819.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:39.648Z,1509699819.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:39.674Z,1509699819.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:40.045Z,1509699820.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:40.071Z,1509699820.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:40.464Z,1509699820.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:40.484Z,1509699820.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:40.869Z,1509699820.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:40.885Z,1509699820.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:41.266Z,1509699821.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:41.281Z,1509699821.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:41.645Z,1509699821.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:41.679Z,1509699821.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:42.047Z,1509699822.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:42.072Z,1509699822.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:42.466Z,1509699822.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:42.481Z,1509699822.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:42.869Z,1509699822.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:42.884Z,1509699822.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:43.261Z,1509699823.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:43.276Z,1509699823.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:43.646Z,1509699823.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:43.672Z,1509699823.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:44.047Z,1509699824.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:44.072Z,1509699824.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:44.469Z,1509699824.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:44.484Z,1509699824.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:44.866Z,1509699824.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:44.942Z,1509699824.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:45.265Z,1509699825.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:45.280Z,1509699825.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:45.647Z,1509699825.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:45.673Z,1509699825.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:46.046Z,1509699826.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:46.102Z,1509699826.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:46.465Z,1509699826.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:46.480Z,1509699826.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:46.869Z,1509699826.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:46.922Z,1509699826.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:47.266Z,1509699827.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:47.319Z,1509699827.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:47.648Z,1509699827.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:47.674Z,1509699827.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:48.044Z,1509699828.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:48.074Z,1509699828.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:48.463Z,1509699828.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:48.484Z,1509699828.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:48.869Z,1509699828.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:48.884Z,1509699828.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:49.262Z,1509699829.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:49.277Z,1509699829.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:49.646Z,1509699829.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:49.672Z,1509699829.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:50.047Z,1509699830.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:50.072Z,1509699830.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:50.465Z,1509699830.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:50.480Z,1509699830.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:50.870Z,1509699830.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:50.885Z,1509699830.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:51.258Z,1509699831.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:51.279Z,1509699831.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:51.647Z,1509699831.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:51.673Z,1509699831.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:52.044Z,1509699832.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:52.075Z,1509699832.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:52.468Z,1509699832.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:52.483Z,1509699832.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:52.861Z,1509699832.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:52.877Z,1509699832.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:53.266Z,1509699833.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:53.281Z,1509699833.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:53.648Z,1509699833.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:53.673Z,1509699833.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:54.047Z,1509699834.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:54.073Z,1509699834.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:54.467Z,1509699834.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:54.482Z,1509699834.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:54.865Z,1509699834.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:54.881Z,1509699834.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:55.265Z,1509699835.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:55.280Z,1509699835.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:55.648Z,1509699835.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:55.675Z,1509699835.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:56.048Z,1509699836.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:56.073Z,1509699836.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:56.465Z,1509699836.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:56.481Z,1509699836.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:56.866Z,1509699836.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:56.881Z,1509699836.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:57.266Z,1509699837.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:57.281Z,1509699837.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:57.643Z,1509699837.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:57.698Z,1509699837.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:58.044Z,1509699838.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:58.073Z,1509699838.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:58.467Z,1509699838.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:58.527Z,1509699838.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:58.870Z,1509699838.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:58.885Z,1509699838.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:59.267Z,1509699839.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:59.323Z,1509699839.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:03:59.648Z,1509699839.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:03:59.679Z,1509699839.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:00.047Z,1509699840.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:00.091Z,1509699840.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:00.466Z,1509699840.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:00.523Z,1509699840.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:00.866Z,1509699840.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:00.882Z,1509699840.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:01.266Z,1509699841.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:01.281Z,1509699841.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:01.646Z,1509699841.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:01.681Z,1509699841.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:02.047Z,1509699842.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:02.079Z,1509699842.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:02.453Z,1509699842.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:02.486Z,1509699842.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:02.861Z,1509699842.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:02.884Z,1509699842.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:03.261Z,1509699843.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:03.291Z,1509699843.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:03.651Z,1509699843.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:03.686Z,1509699843.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:04.051Z,1509699844.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:04.086Z,1509699844.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:04.457Z,1509699844.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:04.489Z,1509699844.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:04.857Z,1509699844.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:04.888Z,1509699844.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:05.265Z,1509699845.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:05.294Z,1509699845.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:05.652Z,1509699845.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:05.687Z,1509699845.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:06.051Z,1509699846.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:06.065Z,1509699846.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:06.461Z,1509699846.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:06.496Z,1509699846.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:06.861Z,1509699846.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:06.876Z,1509699846.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:07.261Z,1509699847.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:07.296Z,1509699847.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:07.648Z,1509699847.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:07.663Z,1509699847.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:08.048Z,1509699848.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:08.063Z,1509699848.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:08.460Z,1509699848.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:08.475Z,1509699848.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:08.861Z,1509699848.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:08.895Z,1509699848.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:09.266Z,1509699849.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:09.294Z,1509699849.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:09.648Z,1509699849.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:09.664Z,1509699849.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:10.052Z,1509699850.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:10.075Z,1509699850.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:10.461Z,1509699850.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:10.498Z,1509699850.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:10.857Z,1509699850.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:10.918Z,1509699850.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:11.257Z,1509699851.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:11.318Z,1509699851.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:11.656Z,1509699851.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:11.671Z,1509699851.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:12.052Z,1509699852.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:12.102Z,1509699852.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:12.457Z,1509699852.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:12.473Z,1509699852.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:12.861Z,1509699852.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:12.915Z,1509699852.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:13.260Z,1509699853.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:13.315Z,1509699853.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:13.654Z,1509699853.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:13.669Z,1509699853.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:14.054Z,1509699854.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:14.075Z,1509699854.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:14.457Z,1509699854.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:14.472Z,1509699854.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:14.862Z,1509699854.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:14.877Z,1509699854.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:15.258Z,1509699855.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:15.279Z,1509699855.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:15.654Z,1509699855.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:15.669Z,1509699855.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:16.056Z,1509699856.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:16.071Z,1509699856.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:16.461Z,1509699856.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:16.477Z,1509699856.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:16.858Z,1509699856.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:16.873Z,1509699856.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:17.258Z,1509699857.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:17.273Z,1509699857.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:17.655Z,1509699857.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:17.670Z,1509699857.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:18.054Z,1509699858.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:18.069Z,1509699858.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:18.458Z,1509699858.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:18.479Z,1509699858.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:18.862Z,1509699858.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:18.877Z,1509699858.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:19.257Z,1509699859.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:19.273Z,1509699859.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:19.654Z,1509699859.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:19.669Z,1509699859.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:20.054Z,1509699860.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:20.069Z,1509699860.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:20.457Z,1509699860.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:20.473Z,1509699860.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:20.857Z,1509699860.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:20.872Z,1509699860.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:21.262Z,1509699861.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:21.277Z,1509699861.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:21.653Z,1509699861.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:21.668Z,1509699861.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:22.054Z,1509699862.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:22.069Z,1509699862.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:22.458Z,1509699862.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:22.473Z,1509699862.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:22.861Z,1509699862.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:22.876Z,1509699862.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:23.257Z,1509699863.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:23.278Z,1509699863.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:23.654Z,1509699863.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:23.675Z,1509699863.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:24.053Z,1509699864.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:24.115Z,1509699864.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:24.465Z,1509699864.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:24.480Z,1509699864.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:24.865Z,1509699864.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:24.880Z,1509699864.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:25.264Z,1509699865.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:25.330Z,1509699865.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:25.654Z,1509699865.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:25.669Z,1509699865.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:26.043Z,1509699866.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:26.074Z,1509699866.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:26.465Z,1509699866.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:26.515Z,1509699866.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:26.866Z,1509699866.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:26.886Z,1509699866.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:27.265Z,1509699867.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:27.315Z,1509699867.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:27.655Z,1509699867.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:27.714Z,1509699867.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:28.041Z,1509699868.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:28.075Z,1509699868.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:28.465Z,1509699868.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:28.487Z,1509699868.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:28.869Z,1509699868.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:28.884Z,1509699868.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:29.269Z,1509699869.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:29.284Z,1509699869.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:32.330Z,1509699872.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:32.345Z,1509699872.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:32.496Z,1509699872.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:32.531Z,1509699872.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:32.918Z,1509699872.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:32.933Z,1509699872.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:33.317Z,1509699873.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:33.332Z,1509699873.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:33.713Z,1509699873.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:33.729Z,1509699873.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:34.097Z,1509699874.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:34.125Z,1509699874.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:34.493Z,1509699874.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:34.527Z,1509699874.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:34.900Z,1509699874.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:34.931Z,1509699874.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:35.300Z,1509699875.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:35.335Z,1509699875.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:35.721Z,1509699875.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:35.736Z,1509699875.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:36.122Z,1509699876.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:36.137Z,1509699876.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:36.519Z,1509699876.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:36.534Z,1509699876.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:36.899Z,1509699876.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:36.930Z,1509699876.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:37.299Z,1509699877.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:37.331Z,1509699877.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:37.698Z,1509699877.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:37.732Z,1509699877.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:38.092Z,1509699878.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:38.107Z,1509699878.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:38.508Z,1509699878.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:38.579Z,1509699878.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:38.918Z,1509699878.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:38.932Z,1509699878.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:39.324Z,1509699879.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:39.339Z,1509699879.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:39.696Z,1509699879.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:39.754Z,1509699879.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:40.096Z,1509699880.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:40.111Z,1509699880.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:40.497Z,1509699880.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:40.512Z,1509699880.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:40.896Z,1509699880.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:40.948Z,1509699880.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:41.295Z,1509699881.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:41.311Z,1509699881.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:41.710Z,1509699881.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:41.759Z,1509699881.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:42.108Z,1509699882.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:42.145Z,1509699882.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:42.509Z,1509699882.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:42.554Z,1509699882.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:42.896Z,1509699882.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:42.920Z,1509699882.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:43.295Z,1509699883.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:43.311Z,1509699883.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:43.696Z,1509699883.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:43.711Z,1509699883.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:44.101Z,1509699884.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:44.116Z,1509699884.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:44.509Z,1509699884.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:44.545Z,1509699884.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:44.913Z,1509699884.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:44.949Z,1509699884.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:45.313Z,1509699885.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:45.348Z,1509699885.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:45.699Z,1509699885.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:45.714Z,1509699885.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:46.100Z,1509699886.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:46.114Z,1509699886.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:46.500Z,1509699886.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:46.515Z,1509699886.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:46.900Z,1509699886.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:46.915Z,1509699886.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:47.300Z,1509699887.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:47.314Z,1509699887.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:47.713Z,1509699887.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:47.748Z,1509699887.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:48.113Z,1509699888.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:48.145Z,1509699888.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:48.513Z,1509699888.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:48.549Z,1509699888.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:48.900Z,1509699888.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:48.915Z,1509699888.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:49.300Z,1509699889.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:49.315Z,1509699889.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:49.701Z,1509699889.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:49.715Z,1509699889.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:50.100Z,1509699890.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:50.123Z,1509699890.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:50.513Z,1509699890.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:50.546Z,1509699890.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:50.912Z,1509699890.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:50.927Z,1509699890.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:51.306Z,1509699891.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:51.321Z,1509699891.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:51.700Z,1509699891.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:51.715Z,1509699891.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:52.100Z,1509699892.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:52.115Z,1509699892.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:52.500Z,1509699892.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:52.515Z,1509699892.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:52.900Z,1509699892.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:52.915Z,1509699892.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:53.300Z,1509699893.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:53.363Z,1509699893.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:53.713Z,1509699893.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:53.748Z,1509699893.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:54.113Z,1509699894.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:54.167Z,1509699894.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:54.513Z,1509699894.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:54.546Z,1509699894.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:54.901Z,1509699894.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:54.955Z,1509699894.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:55.300Z,1509699895.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:55.315Z,1509699895.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:55.702Z,1509699895.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:55.747Z,1509699895.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:56.101Z,1509699896.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:56.155Z,1509699896.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:56.513Z,1509699896.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:56.545Z,1509699896.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:56.913Z,1509699896.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:56.949Z,1509699896.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:57.318Z,1509699897.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:57.347Z,1509699897.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:57.700Z,1509699897.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:57.715Z,1509699897.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:58.100Z,1509699898.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:58.115Z,1509699898.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:58.501Z,1509699898.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:58.516Z,1509699898.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:58.901Z,1509699898.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:58.917Z,1509699898.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:59.302Z,1509699899.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:59.318Z,1509699899.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:04:59.713Z,1509699899.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:04:59.748Z,1509699899.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:00.113Z,1509699900.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:00.145Z,1509699900.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:00.510Z,1509699900.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:00.525Z,1509699900.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:00.904Z,1509699900.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:00.920Z,1509699900.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:01.304Z,1509699901.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:01.323Z,1509699901.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:01.706Z,1509699901.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:01.721Z,1509699901.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:02.104Z,1509699902.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:02.120Z,1509699902.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:02.518Z,1509699902.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:02.550Z,1509699902.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:02.909Z,1509699902.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:02.925Z,1509699902.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:03.310Z,1509699903.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:03.326Z,1509699903.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:03.704Z,1509699903.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:03.720Z,1509699903.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:04.106Z,1509699904.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:04.121Z,1509699904.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:04.506Z,1509699904.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:04.521Z,1509699904.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:04.904Z,1509699904.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:04.920Z,1509699904.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:05.306Z,1509699905.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:05.321Z,1509699905.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:05.710Z,1509699905.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:05.725Z,1509699905.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:06.109Z,1509699906.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:06.125Z,1509699906.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:06.509Z,1509699906.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:06.530Z,1509699906.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:06.906Z,1509699906.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:06.966Z,1509699906.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:07.304Z,1509699907.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:07.320Z,1509699907.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:07.706Z,1509699907.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:07.763Z,1509699907.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:08.103Z,1509699908.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:08.123Z,1509699908.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:08.516Z,1509699908.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:08.563Z,1509699908.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:08.917Z,1509699908.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:08.938Z,1509699908.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:09.317Z,1509699909.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:09.363Z,1509699909.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:09.704Z,1509699909.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:09.758Z,1509699909.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:10.105Z,1509699910.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:10.120Z,1509699910.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:10.507Z,1509699910.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:10.523Z,1509699910.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:10.905Z,1509699910.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:10.921Z,1509699910.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:11.305Z,1509699911.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:11.323Z,1509699911.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:11.717Z,1509699911.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:11.732Z,1509699911.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:12.115Z,1509699912.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:12.131Z,1509699912.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:12.517Z,1509699912.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:12.531Z,1509699912.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:12.903Z,1509699912.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:12.919Z,1509699912.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:13.304Z,1509699913.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:13.320Z,1509699913.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:13.706Z,1509699913.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:13.721Z,1509699913.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:14.108Z,1509699914.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:14.124Z,1509699914.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:14.516Z,1509699914.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:14.531Z,1509699914.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:14.917Z,1509699914.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:14.931Z,1509699914.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:15.317Z,1509699915.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:15.332Z,1509699915.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:15.707Z,1509699915.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:15.723Z,1509699915.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:16.105Z,1509699916.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:16.123Z,1509699916.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:16.501Z,1509699916.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:16.523Z,1509699916.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:16.908Z,1509699916.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:16.924Z,1509699916.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:17.305Z,1509699917.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:17.320Z,1509699917.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:17.718Z,1509699917.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:17.733Z,1509699917.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:18.116Z,1509699918.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:18.132Z,1509699918.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:18.517Z,1509699918.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:18.539Z,1509699918.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:18.908Z,1509699918.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:18.924Z,1509699918.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:19.305Z,1509699919.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:19.321Z,1509699919.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:19.707Z,1509699919.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:19.722Z,1509699919.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:20.108Z,1509699920.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:20.124Z,1509699920.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:20.517Z,1509699920.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:20.533Z,1509699920.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:20.918Z,1509699920.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:20.938Z,1509699920.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:21.316Z,1509699921.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:21.332Z,1509699921.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:21.706Z,1509699921.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:21.774Z,1509699921.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:22.105Z,1509699922.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:22.139Z,1509699922.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:22.507Z,1509699922.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:22.523Z,1509699922.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:22.905Z,1509699922.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:22.966Z,1509699922.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:23.305Z,1509699923.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:23.327Z,1509699923.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:23.717Z,1509699923.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:23.774Z,1509699923.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:24.117Z,1509699924.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:24.174Z,1509699924.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:24.517Z,1509699924.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:24.538Z,1509699924.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:24.907Z,1509699924.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:24.923Z,1509699924.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:25.305Z,1509699925.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:25.327Z,1509699925.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:25.709Z,1509699925.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:25.725Z,1509699925.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:26.107Z,1509699926.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:26.122Z,1509699926.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:26.517Z,1509699926.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:26.532Z,1509699926.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:26.917Z,1509699926.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:26.938Z,1509699926.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:27.317Z,1509699927.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:27.332Z,1509699927.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:27.707Z,1509699927.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:27.722Z,1509699927.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:28.105Z,1509699928.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:28.131Z,1509699928.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:28.507Z,1509699928.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:28.522Z,1509699928.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:28.907Z,1509699928.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:28.923Z,1509699928.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:29.309Z,1509699929.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:29.324Z,1509699929.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:32.442Z,1509699932.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:32.465Z,1509699932.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:32.625Z,1509699932.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:32.666Z,1509699932.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:33.021Z,1509699933.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:33.039Z,1509699933.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:33.412Z,1509699933.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:33.427Z,1509699933.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:33.810Z,1509699933.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:33.825Z,1509699933.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:34.209Z,1509699934.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:34.223Z,1509699934.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:34.619Z,1509699934.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:34.639Z,1509699934.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:35.020Z,1509699935.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:35.043Z,1509699935.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:35.422Z,1509699935.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:35.445Z,1509699935.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:35.811Z,1509699935.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:35.884Z,1509699935.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:36.209Z,1509699936.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:36.280Z,1509699936.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:36.609Z,1509699936.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:36.627Z,1509699936.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:37.011Z,1509699937.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:37.030Z,1509699937.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:37.411Z,1509699937.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:37.470Z,1509699937.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:37.821Z,1509699937.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:37.836Z,1509699937.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:38.223Z,1509699938.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:38.271Z,1509699938.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:38.620Z,1509699938.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:38.671Z,1509699938.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:39.011Z,1509699939.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:39.026Z,1509699939.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:39.397Z,1509699939.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:39.422Z,1509699939.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:39.812Z,1509699939.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:39.827Z,1509699939.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:40.212Z,1509699940.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:40.227Z,1509699940.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:40.624Z,1509699940.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:40.639Z,1509699940.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:41.024Z,1509699941.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:41.043Z,1509699941.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:41.421Z,1509699941.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:41.436Z,1509699941.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:41.811Z,1509699941.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:41.827Z,1509699941.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:42.211Z,1509699942.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:42.231Z,1509699942.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:42.609Z,1509699942.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:42.627Z,1509699942.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:43.012Z,1509699943.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:43.027Z,1509699943.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:43.411Z,1509699943.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:43.426Z,1509699943.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:43.820Z,1509699943.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:43.839Z,1509699943.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:44.225Z,1509699944.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:44.240Z,1509699944.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:44.625Z,1509699944.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:44.640Z,1509699944.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:45.001Z,1509699945.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:45.032Z,1509699945.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:45.403Z,1509699945.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:45.435Z,1509699945.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:45.802Z,1509699945.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:45.843Z,1509699945.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:46.204Z,1509699946.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:46.219Z,1509699946.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:46.613Z,1509699946.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:46.645Z,1509699946.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:47.014Z,1509699947.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:47.045Z,1509699947.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:47.421Z,1509699947.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:47.451Z,1509699947.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:47.808Z,1509699947.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:47.823Z,1509699947.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:48.201Z,1509699948.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:48.216Z,1509699948.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:48.603Z,1509699948.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:48.619Z,1509699948.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:49.000Z,1509699949.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:49.016Z,1509699949.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:49.401Z,1509699949.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:49.415Z,1509699949.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:49.814Z,1509699949.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:49.850Z,1509699949.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:50.213Z,1509699950.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:50.247Z,1509699950.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:50.614Z,1509699950.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:50.697Z,1509699950.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:51.005Z,1509699951.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:51.020Z,1509699951.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:51.400Z,1509699951.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:51.458Z,1509699951.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:51.800Z,1509699951.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:51.816Z,1509699951.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:52.200Z,1509699952.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:52.258Z,1509699952.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:52.613Z,1509699952.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:52.649Z,1509699952.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:53.013Z,1509699953.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:53.067Z,1509699953.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:53.417Z,1509699953.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:53.449Z,1509699953.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:53.800Z,1509699953.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:53.815Z,1509699953.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:54.207Z,1509699954.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:54.222Z,1509699954.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:54.604Z,1509699954.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:54.619Z,1509699954.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:55.001Z,1509699955.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:55.015Z,1509699955.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:55.405Z,1509699955.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:55.420Z,1509699955.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:55.813Z,1509699955.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:55.829Z,1509699955.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:56.217Z,1509699956.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:56.232Z,1509699956.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:56.612Z,1509699956.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:56.627Z,1509699956.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:57.009Z,1509699957.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:57.025Z,1509699957.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:57.404Z,1509699957.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:57.419Z,1509699957.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:57.811Z,1509699957.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:57.826Z,1509699957.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:58.209Z,1509699958.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:58.224Z,1509699958.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:58.614Z,1509699958.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:58.629Z,1509699958.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:59.039Z,1509699959.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:59.071Z,1509699959.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:59.423Z,1509699959.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:59.438Z,1509699959.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:05:59.801Z,1509699959.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:05:59.827Z,1509699959.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:00.199Z,1509699960.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:00.235Z,1509699960.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:00.622Z,1509699960.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:00.637Z,1509699960.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:01.010Z,1509699961.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:01.035Z,1509699961.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:01.416Z,1509699961.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:01.439Z,1509699961.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:01.439Z,1509699961.439 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 177
2017-11-03T09:06:01.440Z,1509699961.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:06:01.474Z,1509699961.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:01.474Z,1509699961.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 177
2017-11-03T09:06:01.474Z,1509699961.474 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:06:01.476Z,1509699961.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:01.476Z,1509699961.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 177
2017-11-03T09:06:01.476Z,1509699961.476 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:06:01.582Z,1509699961.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:06:01.582Z,1509699961.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:06:01.582Z,1509699961.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:06:01.849Z,1509699961.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:01.980Z,1509699961.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:06:01.981Z,1509699961.981 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 177
2017-11-03T09:06:01.981Z,1509699961.981 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:06:01.981Z,1509699961.981 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 177
2017-11-03T09:06:01.982Z,1509699961.982 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:06:01.982Z,1509699961.982 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 177
2017-11-03T09:06:02.222Z,1509699962.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:02.244Z,1509699962.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:06:02.244Z,1509699962.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:06:02.245Z,1509699962.245 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:06:02.245Z,1509699962.245 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:06:02.246Z,1509699962.246 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:06:02.246Z,1509699962.246 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:06:02.246Z,1509699962.246 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:06:02.247Z,1509699962.247 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:06:02.247Z,1509699962.247 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:06:02.617Z,1509699962.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:02.648Z,1509699962.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:06:02.649Z,1509699962.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:03.004Z,1509699963.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:03.027Z,1509699963.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:06:03.028Z,1509699963.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:03.428Z,1509699963.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:03.449Z,1509699963.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:06:03.450Z,1509699963.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:03.810Z,1509699963.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:03.858Z,1509699963.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:06:03.858Z,1509699963.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:04.215Z,1509699964.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:04.271Z,1509699964.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:06:04.272Z,1509699964.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:04.612Z,1509699964.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:04.687Z,1509699964.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:06:04.688Z,1509699964.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:05.022Z,1509699965.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:05.045Z,1509699965.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:06:05.046Z,1509699965.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:05.476Z,1509699965.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:05.550Z,1509699965.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T09:06:05.551Z,1509699965.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:05.814Z,1509699965.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:05.889Z,1509699965.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T09:06:05.890Z,1509699965.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:06.204Z,1509699966.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:06.254Z,1509699966.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:06:06.255Z,1509699966.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:06.632Z,1509699966.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:06.695Z,1509699966.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T09:06:06.695Z,1509699966.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:07.007Z,1509699967.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:07.034Z,1509699967.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:06:07.035Z,1509699967.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:07.410Z,1509699967.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:07.462Z,1509699967.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:06:07.463Z,1509699967.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:07.823Z,1509699967.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:07.890Z,1509699967.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T09:06:07.891Z,1509699967.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:08.223Z,1509699968.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:08.262Z,1509699968.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:06:08.263Z,1509699968.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:08.616Z,1509699968.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:08.639Z,1509699968.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:06:08.640Z,1509699968.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:09.015Z,1509699969.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:09.043Z,1509699969.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:06:09.044Z,1509699969.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:09.412Z,1509699969.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:09.439Z,1509699969.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:06:09.445Z,1509699969.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:09.802Z,1509699969.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:09.841Z,1509699969.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T09:06:09.842Z,1509699969.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:10.201Z,1509699970.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:10.247Z,1509699970.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T09:06:10.247Z,1509699970.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:10.620Z,1509699970.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:10.639Z,1509699970.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:06:10.645Z,1509699970.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:11.015Z,1509699971.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:11.051Z,1509699971.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:06:11.052Z,1509699971.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:11.415Z,1509699971.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:11.458Z,1509699971.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:06:11.459Z,1509699971.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:11.801Z,1509699971.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:11.893Z,1509699971.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:06:11.894Z,1509699971.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:12.208Z,1509699972.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:12.235Z,1509699972.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:06:12.259Z,1509699972.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:12.610Z,1509699972.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:12.635Z,1509699972.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T09:06:12.636Z,1509699972.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:13.010Z,1509699973.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:13.037Z,1509699973.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T09:06:13.038Z,1509699973.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:13.408Z,1509699973.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:13.478Z,1509699973.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:06:13.479Z,1509699973.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:13.823Z,1509699973.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:13.868Z,1509699973.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:06:13.873Z,1509699973.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:14.222Z,1509699974.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:14.247Z,1509699974.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:06:14.269Z,1509699974.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:14.621Z,1509699974.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:14.635Z,1509699974.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:06:14.636Z,1509699974.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:15.012Z,1509699975.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:15.027Z,1509699975.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:06:15.028Z,1509699975.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:15.411Z,1509699975.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:15.430Z,1509699975.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:06:15.431Z,1509699975.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:15.812Z,1509699975.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:15.827Z,1509699975.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:06:15.828Z,1509699975.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:16.224Z,1509699976.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:16.238Z,1509699976.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:06:16.239Z,1509699976.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:16.624Z,1509699976.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:16.638Z,1509699976.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:06:16.639Z,1509699976.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:17.023Z,1509699977.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:17.038Z,1509699977.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:06:17.039Z,1509699977.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:17.418Z,1509699977.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:17.439Z,1509699977.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:06:17.440Z,1509699977.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:17.804Z,1509699977.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:17.829Z,1509699977.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:06:17.830Z,1509699977.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:18.203Z,1509699978.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:18.228Z,1509699978.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:06:18.229Z,1509699978.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:18.601Z,1509699978.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:18.627Z,1509699978.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:06:18.628Z,1509699978.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:18.996Z,1509699978.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:19.025Z,1509699979.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:06:19.026Z,1509699979.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:19.403Z,1509699979.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:19.428Z,1509699979.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:06:19.429Z,1509699979.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:19.822Z,1509699979.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:19.837Z,1509699979.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:06:19.838Z,1509699979.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:20.225Z,1509699980.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:20.314Z,1509699980.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T09:06:20.315Z,1509699980.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:20.605Z,1509699980.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:20.631Z,1509699980.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:06:20.632Z,1509699980.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:21.001Z,1509699981.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:21.072Z,1509699981.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:06:21.073Z,1509699981.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:21.396Z,1509699981.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:21.427Z,1509699981.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T09:06:21.428Z,1509699981.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:21.804Z,1509699981.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:21.855Z,1509699981.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:22.239Z,1509699982.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:22.299Z,1509699982.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:22.610Z,1509699982.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:22.643Z,1509699982.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:23.025Z,1509699983.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:23.040Z,1509699983.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:23.425Z,1509699983.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:23.455Z,1509699983.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:23.805Z,1509699983.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:23.827Z,1509699983.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:24.205Z,1509699984.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:24.221Z,1509699984.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:24.605Z,1509699984.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:24.620Z,1509699984.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:25.005Z,1509699985.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:25.020Z,1509699985.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:25.406Z,1509699985.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:25.422Z,1509699985.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:25.818Z,1509699985.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:25.845Z,1509699985.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:26.217Z,1509699986.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:26.251Z,1509699986.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:26.609Z,1509699986.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:26.631Z,1509699986.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:27.005Z,1509699987.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:27.019Z,1509699987.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:27.403Z,1509699987.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:27.426Z,1509699987.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:27.806Z,1509699987.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:27.821Z,1509699987.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:28.206Z,1509699988.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:28.226Z,1509699988.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:28.611Z,1509699988.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:28.626Z,1509699988.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:29.022Z,1509699989.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:29.053Z,1509699989.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:29.061Z,1509699989.061 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T09:01:28.9Z
2017-11-03T09:06:29.061Z,1509699989.061 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T09:06:29.061Z,1509699989.061 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T09:06:29.418Z,1509699989.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:29.433Z,1509699989.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:32.617Z,1509699992.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:32.633Z,1509699992.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:32.761Z,1509699992.761 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0208.lzma
2017-11-03T09:06:32.782Z,1509699992.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:32.835Z,1509699992.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:33.203Z,1509699993.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:33.220Z,1509699993.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:33.559Z,1509699993.559 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0208.lzma.bak
2017-11-03T09:06:33.559Z,1509699993.559 [DataOverHttps](INFO): SBD MOMSN=5183194
2017-11-03T09:06:33.620Z,1509699993.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:33.635Z,1509699993.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:34.209Z,1509699994.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:34.295Z,1509699994.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:34.419Z,1509699994.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:34.434Z,1509699994.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:37.602Z,1509699997.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:37.662Z,1509699997.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:37.785Z,1509699997.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:37.815Z,1509699997.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:38.206Z,1509699998.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:38.262Z,1509699998.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:38.612Z,1509699998.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:38.656Z,1509699998.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:39.009Z,1509699999.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:39.024Z,1509699999.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:39.388Z,1509699999.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:39.419Z,1509699999.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:42.502Z,1509700002.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:42.518Z,1509700002.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:42.607Z,1509700002.607 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20171103T001125/Express0209.lzma
2017-11-03T09:06:42.630Z,1509700002.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:42.678Z,1509700002.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:43.053Z,1509700003.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:43.068Z,1509700003.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:43.411Z,1509700003.411 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0209.lzma.bak
2017-11-03T09:06:43.411Z,1509700003.411 [DataOverHttps](INFO): SBD MOMSN=5183196
2017-11-03T09:06:43.465Z,1509700003.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:43.480Z,1509700003.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:44.062Z,1509700004.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:44.077Z,1509700004.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:44.080Z,1509700004.080 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T09:06:44.080Z,1509700004.080 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T09:06:44.080Z,1509700004.080 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T09:06:44.235Z,1509700004.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:44.278Z,1509700004.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:47.338Z,1509700007.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:47.362Z,1509700007.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:47.488Z,1509700007.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:47.535Z,1509700007.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:47.909Z,1509700007.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:47.924Z,1509700007.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:48.316Z,1509700008.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:48.331Z,1509700008.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:48.702Z,1509700008.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:48.731Z,1509700008.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:49.088Z,1509700009.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:49.104Z,1509700009.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:49.488Z,1509700009.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:49.503Z,1509700009.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:49.888Z,1509700009.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:49.907Z,1509700009.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:50.288Z,1509700010.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:50.303Z,1509700010.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:50.716Z,1509700010.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:50.795Z,1509700010.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:51.101Z,1509700011.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:51.133Z,1509700011.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:51.505Z,1509700011.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:51.554Z,1509700011.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:51.888Z,1509700011.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:51.902Z,1509700011.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:52.288Z,1509700012.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:52.343Z,1509700012.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:52.691Z,1509700012.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:52.746Z,1509700012.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:53.092Z,1509700013.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:53.106Z,1509700013.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:53.506Z,1509700013.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:53.536Z,1509700013.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:53.906Z,1509700013.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:53.936Z,1509700013.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:54.300Z,1509700014.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:54.315Z,1509700014.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:54.692Z,1509700014.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:54.708Z,1509700014.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:55.093Z,1509700015.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:55.108Z,1509700015.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:55.492Z,1509700015.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:55.507Z,1509700015.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:55.893Z,1509700015.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:55.909Z,1509700015.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:56.292Z,1509700016.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:56.346Z,1509700016.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:56.697Z,1509700016.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:56.713Z,1509700016.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:57.106Z,1509700017.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:57.133Z,1509700017.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:57.506Z,1509700017.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:57.536Z,1509700017.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:57.891Z,1509700017.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:57.906Z,1509700017.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:58.290Z,1509700018.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:58.305Z,1509700018.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:58.696Z,1509700018.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:58.737Z,1509700018.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:59.091Z,1509700019.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:59.106Z,1509700019.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:59.505Z,1509700019.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:59.536Z,1509700019.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:06:59.905Z,1509700019.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:06:59.937Z,1509700019.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:00.304Z,1509700020.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:00.336Z,1509700020.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:00.730Z,1509700020.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:00.746Z,1509700020.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:01.091Z,1509700021.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:01.107Z,1509700021.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:01.496Z,1509700021.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:01.557Z,1509700021.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:01.892Z,1509700021.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:01.907Z,1509700021.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:02.291Z,1509700022.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:02.307Z,1509700022.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:02.708Z,1509700022.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:02.727Z,1509700022.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:03.113Z,1509700023.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:03.135Z,1509700023.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:03.509Z,1509700023.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:03.525Z,1509700023.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:03.891Z,1509700023.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:03.917Z,1509700023.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:04.291Z,1509700024.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:04.317Z,1509700024.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:04.689Z,1509700024.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:04.743Z,1509700024.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:05.088Z,1509700025.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:05.146Z,1509700025.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:05.509Z,1509700025.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:05.524Z,1509700025.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:05.909Z,1509700025.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:05.963Z,1509700025.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:06.313Z,1509700026.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:06.328Z,1509700026.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:06.691Z,1509700026.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:06.746Z,1509700026.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:07.088Z,1509700027.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:07.158Z,1509700027.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:07.488Z,1509700027.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:07.522Z,1509700027.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:07.892Z,1509700027.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:07.917Z,1509700027.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:08.288Z,1509700028.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:08.322Z,1509700028.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:08.714Z,1509700028.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:08.729Z,1509700028.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:09.110Z,1509700029.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:09.125Z,1509700029.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:09.510Z,1509700029.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:09.525Z,1509700029.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:09.891Z,1509700029.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:09.917Z,1509700029.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:10.285Z,1509700030.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:10.315Z,1509700030.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:10.690Z,1509700030.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:10.724Z,1509700030.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:11.091Z,1509700031.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:11.122Z,1509700031.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:11.513Z,1509700031.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:11.528Z,1509700031.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:11.913Z,1509700031.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:11.928Z,1509700031.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:12.311Z,1509700032.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:12.325Z,1509700032.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:12.691Z,1509700032.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:12.722Z,1509700032.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:13.088Z,1509700033.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:13.120Z,1509700033.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:13.484Z,1509700033.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:13.499Z,1509700033.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:13.889Z,1509700033.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:13.921Z,1509700033.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:14.285Z,1509700034.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:14.300Z,1509700034.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:14.701Z,1509700034.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:14.730Z,1509700034.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:15.105Z,1509700035.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:15.133Z,1509700035.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:15.502Z,1509700035.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:15.528Z,1509700035.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:15.889Z,1509700035.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:15.904Z,1509700035.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:16.292Z,1509700036.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:16.307Z,1509700036.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:16.693Z,1509700036.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:16.709Z,1509700036.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:17.095Z,1509700037.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:17.134Z,1509700037.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:17.502Z,1509700037.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:17.533Z,1509700037.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:17.906Z,1509700037.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:17.923Z,1509700037.923 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T09:07:17.923Z,1509700037.923 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:07:17.923Z,1509700037.923 [BPC1](ERROR): Data Fault
2017-11-03T09:07:17.931Z,1509700037.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:18.013Z,1509700038.013 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:07:18.309Z,1509700038.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:18.340Z,1509700038.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:18.690Z,1509700038.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:18.705Z,1509700038.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:19.094Z,1509700039.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:19.109Z,1509700039.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:19.205Z,1509700039.205 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:07:19.205Z,1509700039.205 [BPC1] No Fault, FailCount= 1
2017-11-03T09:07:19.491Z,1509700039.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:19.563Z,1509700039.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:19.892Z,1509700039.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:19.914Z,1509700039.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:20.292Z,1509700040.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:20.307Z,1509700040.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:20.709Z,1509700040.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:20.759Z,1509700040.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:21.105Z,1509700041.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:21.133Z,1509700041.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:21.505Z,1509700041.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:21.553Z,1509700041.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:21.891Z,1509700041.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:21.906Z,1509700041.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:22.292Z,1509700042.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:22.307Z,1509700042.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:22.696Z,1509700042.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:22.715Z,1509700042.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:23.090Z,1509700043.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:23.105Z,1509700043.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:23.505Z,1509700043.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:23.535Z,1509700043.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:23.905Z,1509700043.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:23.937Z,1509700043.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:24.305Z,1509700044.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:24.336Z,1509700044.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:24.692Z,1509700044.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:24.714Z,1509700044.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:25.092Z,1509700045.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:25.107Z,1509700045.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:25.491Z,1509700045.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:25.506Z,1509700045.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:25.892Z,1509700045.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:25.915Z,1509700045.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:26.292Z,1509700046.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:26.307Z,1509700046.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:26.705Z,1509700046.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:26.735Z,1509700046.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:27.105Z,1509700047.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:27.133Z,1509700047.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:27.505Z,1509700047.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:27.537Z,1509700047.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:27.891Z,1509700047.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:27.910Z,1509700047.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:28.292Z,1509700048.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:28.311Z,1509700048.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:28.694Z,1509700048.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:28.709Z,1509700048.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:29.092Z,1509700049.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:29.107Z,1509700049.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:29.505Z,1509700049.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:29.535Z,1509700049.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:29.905Z,1509700049.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:29.937Z,1509700049.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:30.297Z,1509700050.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:30.334Z,1509700050.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:30.692Z,1509700050.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:30.707Z,1509700050.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:31.092Z,1509700051.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:31.107Z,1509700051.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:31.492Z,1509700051.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:31.507Z,1509700051.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:31.892Z,1509700051.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:31.907Z,1509700051.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:32.292Z,1509700052.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:32.307Z,1509700052.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:32.705Z,1509700052.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:32.813Z,1509700052.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:33.105Z,1509700053.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:33.133Z,1509700053.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:33.505Z,1509700053.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:33.555Z,1509700053.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:33.892Z,1509700053.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:33.907Z,1509700053.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:34.292Z,1509700054.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:34.339Z,1509700054.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:34.693Z,1509700054.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:34.746Z,1509700054.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:35.092Z,1509700055.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:35.107Z,1509700055.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:35.506Z,1509700055.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:35.534Z,1509700055.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:35.906Z,1509700055.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:35.936Z,1509700055.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:36.306Z,1509700056.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:36.336Z,1509700056.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:36.692Z,1509700056.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:36.707Z,1509700056.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:37.092Z,1509700057.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:37.107Z,1509700057.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:37.492Z,1509700057.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:37.510Z,1509700057.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:37.892Z,1509700057.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:37.911Z,1509700057.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:38.292Z,1509700058.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:38.307Z,1509700058.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:38.709Z,1509700058.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:38.733Z,1509700058.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:39.106Z,1509700059.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:39.133Z,1509700059.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:39.505Z,1509700059.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:39.537Z,1509700059.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:39.892Z,1509700059.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:39.907Z,1509700059.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:40.291Z,1509700060.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:40.307Z,1509700060.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:40.693Z,1509700060.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:40.707Z,1509700060.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:41.092Z,1509700061.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:41.115Z,1509700061.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:41.505Z,1509700061.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:41.535Z,1509700061.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:41.905Z,1509700061.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:41.934Z,1509700061.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:42.305Z,1509700062.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:42.337Z,1509700062.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:42.692Z,1509700062.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:42.715Z,1509700062.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:43.092Z,1509700063.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:43.107Z,1509700063.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:43.496Z,1509700063.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:43.511Z,1509700063.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:43.892Z,1509700063.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:43.915Z,1509700063.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:44.293Z,1509700064.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:44.308Z,1509700064.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:44.706Z,1509700064.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:44.735Z,1509700064.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:47.802Z,1509700067.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:47.898Z,1509700067.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:48.049Z,1509700068.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:48.064Z,1509700068.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:48.443Z,1509700068.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:48.463Z,1509700068.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:48.840Z,1509700068.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:48.898Z,1509700068.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:49.246Z,1509700069.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:49.261Z,1509700069.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:49.650Z,1509700069.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:49.694Z,1509700069.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:50.046Z,1509700070.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:50.095Z,1509700070.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:50.446Z,1509700070.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:50.461Z,1509700070.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:50.847Z,1509700070.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:50.867Z,1509700070.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:51.243Z,1509700071.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:51.263Z,1509700071.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:51.641Z,1509700071.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:51.656Z,1509700071.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:52.043Z,1509700072.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:52.057Z,1509700072.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:52.446Z,1509700072.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:52.461Z,1509700072.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:52.849Z,1509700072.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:52.865Z,1509700072.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:53.246Z,1509700073.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:53.261Z,1509700073.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:53.641Z,1509700073.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:53.663Z,1509700073.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:54.043Z,1509700074.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:54.063Z,1509700074.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:54.449Z,1509700074.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:54.464Z,1509700074.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:54.846Z,1509700074.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:54.861Z,1509700074.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:55.246Z,1509700075.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:55.261Z,1509700075.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:55.647Z,1509700075.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:55.662Z,1509700075.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:56.043Z,1509700076.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:56.058Z,1509700076.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:56.446Z,1509700076.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:56.461Z,1509700076.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:56.846Z,1509700076.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:56.861Z,1509700076.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:57.250Z,1509700077.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:57.265Z,1509700077.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:57.642Z,1509700077.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:57.663Z,1509700077.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:58.041Z,1509700078.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:58.063Z,1509700078.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:58.446Z,1509700078.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:58.467Z,1509700078.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:58.846Z,1509700078.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:58.867Z,1509700078.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:59.246Z,1509700079.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:59.261Z,1509700079.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:07:59.642Z,1509700079.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:07:59.657Z,1509700079.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:00.040Z,1509700080.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:00.055Z,1509700080.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:00.450Z,1509700080.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:00.465Z,1509700080.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:00.850Z,1509700080.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:00.865Z,1509700080.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:01.245Z,1509700081.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:01.261Z,1509700081.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:01.642Z,1509700081.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:01.657Z,1509700081.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:02.046Z,1509700082.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:02.134Z,1509700082.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:02.453Z,1509700082.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:02.468Z,1509700082.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:02.857Z,1509700082.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:02.903Z,1509700082.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:03.253Z,1509700083.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:03.267Z,1509700083.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:03.642Z,1509700083.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:03.702Z,1509700083.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:04.046Z,1509700084.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:04.061Z,1509700084.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:04.453Z,1509700084.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:04.503Z,1509700084.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:04.854Z,1509700084.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:04.869Z,1509700084.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:05.257Z,1509700085.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:05.272Z,1509700085.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:05.646Z,1509700085.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:05.667Z,1509700085.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:06.043Z,1509700086.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:06.058Z,1509700086.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:06.454Z,1509700086.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:06.469Z,1509700086.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:06.851Z,1509700086.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:06.866Z,1509700086.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:07.257Z,1509700087.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:07.272Z,1509700087.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:07.645Z,1509700087.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:07.661Z,1509700087.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:08.043Z,1509700088.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:08.059Z,1509700088.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:08.455Z,1509700088.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:08.470Z,1509700088.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:08.857Z,1509700088.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:08.875Z,1509700088.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:09.254Z,1509700089.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:09.269Z,1509700089.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:09.642Z,1509700089.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:09.657Z,1509700089.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:10.030Z,1509700090.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:10.063Z,1509700090.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:10.450Z,1509700090.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:10.465Z,1509700090.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:10.853Z,1509700090.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:10.868Z,1509700090.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:11.257Z,1509700091.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:11.272Z,1509700091.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:11.646Z,1509700091.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:11.662Z,1509700091.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:12.041Z,1509700092.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:12.061Z,1509700092.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:12.456Z,1509700092.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:12.472Z,1509700092.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:12.856Z,1509700092.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:12.871Z,1509700092.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:13.252Z,1509700093.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:13.275Z,1509700093.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:13.645Z,1509700093.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:13.666Z,1509700093.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:14.042Z,1509700094.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:14.063Z,1509700094.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:14.452Z,1509700094.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:14.467Z,1509700094.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:14.853Z,1509700094.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:14.868Z,1509700094.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:15.256Z,1509700095.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:15.271Z,1509700095.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:15.642Z,1509700095.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:15.657Z,1509700095.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:16.044Z,1509700096.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:16.079Z,1509700096.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:16.452Z,1509700096.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:16.522Z,1509700096.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:16.857Z,1509700096.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:16.872Z,1509700096.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:17.257Z,1509700097.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:17.302Z,1509700097.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:17.634Z,1509700097.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:17.666Z,1509700097.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:18.034Z,1509700098.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:18.102Z,1509700098.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:18.450Z,1509700098.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:18.502Z,1509700098.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:18.856Z,1509700098.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:18.871Z,1509700098.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:19.252Z,1509700099.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:19.267Z,1509700099.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:19.638Z,1509700099.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:19.664Z,1509700099.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:20.036Z,1509700100.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:20.061Z,1509700100.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:20.453Z,1509700100.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:20.469Z,1509700100.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:20.864Z,1509700100.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:20.879Z,1509700100.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:21.257Z,1509700101.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:21.272Z,1509700101.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:21.635Z,1509700101.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:21.661Z,1509700101.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:22.028Z,1509700102.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:22.063Z,1509700102.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:22.453Z,1509700102.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:22.475Z,1509700102.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:22.853Z,1509700102.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:22.868Z,1509700102.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:23.257Z,1509700103.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:23.278Z,1509700103.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:23.633Z,1509700103.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:23.660Z,1509700103.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:24.032Z,1509700104.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:24.062Z,1509700104.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:24.458Z,1509700104.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:24.472Z,1509700104.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:24.857Z,1509700104.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:24.872Z,1509700104.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:25.253Z,1509700105.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:25.269Z,1509700105.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:25.636Z,1509700105.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:25.662Z,1509700105.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:26.030Z,1509700106.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:26.075Z,1509700106.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:26.458Z,1509700106.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:26.473Z,1509700106.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:26.858Z,1509700106.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:26.872Z,1509700106.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:27.254Z,1509700107.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:27.269Z,1509700107.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:27.637Z,1509700107.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:27.663Z,1509700107.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:28.037Z,1509700108.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:28.063Z,1509700108.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:28.455Z,1509700108.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:28.475Z,1509700108.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:28.854Z,1509700108.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:28.869Z,1509700108.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:29.259Z,1509700109.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:29.278Z,1509700109.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:29.636Z,1509700109.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:29.663Z,1509700109.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:30.032Z,1509700110.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:30.063Z,1509700110.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:30.459Z,1509700110.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:30.522Z,1509700110.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:30.853Z,1509700110.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:30.923Z,1509700110.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:31.253Z,1509700111.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:31.269Z,1509700111.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:31.636Z,1509700111.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:31.687Z,1509700111.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:32.033Z,1509700112.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:32.061Z,1509700112.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:32.453Z,1509700112.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:32.510Z,1509700112.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:32.853Z,1509700112.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:32.907Z,1509700112.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:33.252Z,1509700113.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:33.267Z,1509700113.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:33.633Z,1509700113.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:33.659Z,1509700113.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:34.031Z,1509700114.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:34.062Z,1509700114.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:34.453Z,1509700114.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:34.475Z,1509700114.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:34.852Z,1509700114.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:34.867Z,1509700114.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:35.257Z,1509700115.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:35.272Z,1509700115.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:35.635Z,1509700115.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:35.660Z,1509700115.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:36.034Z,1509700116.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:36.060Z,1509700116.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:36.453Z,1509700116.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:36.468Z,1509700116.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:36.853Z,1509700116.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:36.875Z,1509700116.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:37.253Z,1509700117.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:37.268Z,1509700117.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:37.636Z,1509700117.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:37.666Z,1509700117.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:38.035Z,1509700118.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:38.061Z,1509700118.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:38.453Z,1509700118.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:38.468Z,1509700118.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:38.850Z,1509700118.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:38.870Z,1509700118.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:39.253Z,1509700119.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:39.275Z,1509700119.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:39.633Z,1509700119.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:39.659Z,1509700119.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:40.035Z,1509700120.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:40.061Z,1509700120.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:40.458Z,1509700120.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:40.473Z,1509700120.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:40.858Z,1509700120.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:40.873Z,1509700120.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:41.258Z,1509700121.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:41.273Z,1509700121.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:41.634Z,1509700121.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:41.660Z,1509700121.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:42.035Z,1509700122.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:42.061Z,1509700122.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:42.450Z,1509700122.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:42.465Z,1509700122.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:42.854Z,1509700122.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:42.869Z,1509700122.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:43.255Z,1509700123.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:43.275Z,1509700123.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:43.639Z,1509700123.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:43.666Z,1509700123.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:44.035Z,1509700124.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:44.067Z,1509700124.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:44.446Z,1509700124.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:44.469Z,1509700124.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:44.859Z,1509700124.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:44.947Z,1509700124.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:47.930Z,1509700127.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:47.962Z,1509700127.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:48.107Z,1509700128.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:48.123Z,1509700128.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:48.506Z,1509700128.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:48.543Z,1509700128.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:48.909Z,1509700128.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:48.925Z,1509700128.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:49.301Z,1509700129.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:49.362Z,1509700129.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:49.719Z,1509700129.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:49.766Z,1509700129.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:50.114Z,1509700130.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:50.135Z,1509700130.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:50.514Z,1509700130.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:50.535Z,1509700130.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:50.905Z,1509700130.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:50.920Z,1509700130.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:51.303Z,1509700131.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:51.323Z,1509700131.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:51.703Z,1509700131.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:51.719Z,1509700131.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:52.104Z,1509700132.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:52.119Z,1509700132.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:52.513Z,1509700132.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:52.535Z,1509700132.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:52.916Z,1509700132.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:52.932Z,1509700132.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:53.318Z,1509700133.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:53.332Z,1509700133.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:53.702Z,1509700133.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:53.724Z,1509700133.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:53.801Z,1509700133.801 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:08:53.801Z,1509700133.801 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T09:08:54.001Z,1509700134.001 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:08:54.001Z,1509700134.001 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:08:54.002Z,1509700134.002 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:08:54.002Z,1509700134.002 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:08:54.099Z,1509700134.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:54.118Z,1509700134.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:54.502Z,1509700134.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:54.517Z,1509700134.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:54.903Z,1509700134.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:54.923Z,1509700134.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:55.300Z,1509700135.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:55.323Z,1509700135.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:55.717Z,1509700135.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:55.732Z,1509700135.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:56.116Z,1509700136.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:56.135Z,1509700136.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:56.513Z,1509700136.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:56.528Z,1509700136.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:56.901Z,1509700136.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:56.920Z,1509700136.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:57.303Z,1509700137.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:57.323Z,1509700137.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:57.701Z,1509700137.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:57.723Z,1509700137.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:58.115Z,1509700138.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:58.141Z,1509700138.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:58.244Z,1509700138.244 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:08:58.319Z,1509700138.319 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:08:58.320Z,1509700138.320 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:08:58.321Z,1509700138.321 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:08:58.321Z,1509700138.321 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:08:58.520Z,1509700138.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:58.578Z,1509700138.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:58.914Z,1509700138.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:58.935Z,1509700138.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:59.306Z,1509700139.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:59.343Z,1509700139.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:08:59.693Z,1509700139.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:08:59.725Z,1509700139.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:00.093Z,1509700140.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:00.109Z,1509700140.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:00.493Z,1509700140.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:00.509Z,1509700140.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:00.896Z,1509700140.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:00.912Z,1509700140.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:01.295Z,1509700141.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:01.335Z,1509700141.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:01.709Z,1509700141.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:01.802Z,1509700141.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:02.105Z,1509700142.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:02.137Z,1509700142.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:02.509Z,1509700142.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:02.559Z,1509700142.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:02.559Z,1509700142.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 178
2017-11-03T09:09:02.559Z,1509700142.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:09:02.561Z,1509700142.561 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:02.561Z,1509700142.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 178
2017-11-03T09:09:02.561Z,1509700142.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:09:02.563Z,1509700142.563 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:02.563Z,1509700142.563 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 178
2017-11-03T09:09:02.563Z,1509700142.563 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:09:02.655Z,1509700142.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:09:02.656Z,1509700142.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:09:02.656Z,1509700142.656 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:09:02.903Z,1509700142.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:03.013Z,1509700143.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:09:03.013Z,1509700143.013 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 178
2017-11-03T09:09:03.013Z,1509700143.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:09:03.013Z,1509700143.013 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 178
2017-11-03T09:09:03.014Z,1509700143.014 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:09:03.014Z,1509700143.014 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 178
2017-11-03T09:09:03.295Z,1509700143.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:03.346Z,1509700143.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:09:03.346Z,1509700143.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:09:03.346Z,1509700143.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:09:03.347Z,1509700143.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:09:03.347Z,1509700143.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:09:03.347Z,1509700143.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:09:03.348Z,1509700143.348 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:09:03.348Z,1509700143.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:09:03.349Z,1509700143.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:09:03.693Z,1509700143.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:03.739Z,1509700143.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:04.093Z,1509700144.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:04.128Z,1509700144.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:04.513Z,1509700144.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:04.535Z,1509700144.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:04.925Z,1509700144.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:04.941Z,1509700144.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:05.314Z,1509700145.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:05.335Z,1509700145.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:05.688Z,1509700145.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:05.703Z,1509700145.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:06.092Z,1509700146.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:06.107Z,1509700146.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:06.495Z,1509700146.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:06.532Z,1509700146.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:06.904Z,1509700146.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:06.928Z,1509700146.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:07.295Z,1509700147.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:07.319Z,1509700147.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:07.709Z,1509700147.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:07.730Z,1509700147.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:08.109Z,1509700148.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:08.136Z,1509700148.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:08.505Z,1509700148.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:08.533Z,1509700148.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:08.892Z,1509700148.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:08.907Z,1509700148.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:09.293Z,1509700149.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:09.308Z,1509700149.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:09.693Z,1509700149.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:09.709Z,1509700149.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:10.092Z,1509700150.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:10.107Z,1509700150.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:10.506Z,1509700150.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:10.531Z,1509700150.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:10.956Z,1509700150.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:10.997Z,1509700150.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:11.322Z,1509700151.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:11.337Z,1509700151.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:11.692Z,1509700151.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:11.708Z,1509700151.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:12.092Z,1509700152.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:12.135Z,1509700152.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:12.493Z,1509700152.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:12.508Z,1509700152.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:12.900Z,1509700152.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:12.934Z,1509700152.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:13.299Z,1509700153.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:13.334Z,1509700153.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:13.706Z,1509700153.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:13.732Z,1509700153.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:14.110Z,1509700154.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:14.140Z,1509700154.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:14.505Z,1509700154.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:14.531Z,1509700154.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:14.891Z,1509700154.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:14.900Z,1509700154.900 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T09:09:14.900Z,1509700154.900 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:09:14.900Z,1509700154.900 [BPC1](ERROR): Data Fault
2017-11-03T09:09:14.908Z,1509700154.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:15.022Z,1509700155.022 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:09:15.299Z,1509700155.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:15.315Z,1509700155.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:15.697Z,1509700155.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:15.712Z,1509700155.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:16.096Z,1509700156.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:16.115Z,1509700156.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:16.222Z,1509700156.222 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:09:16.222Z,1509700156.222 [BPC1] No Fault, FailCount= 1
2017-11-03T09:09:16.509Z,1509700156.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:16.587Z,1509700156.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:16.907Z,1509700156.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:16.923Z,1509700156.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:17.308Z,1509700157.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:17.358Z,1509700157.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:17.702Z,1509700157.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:17.723Z,1509700157.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:18.100Z,1509700158.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:18.116Z,1509700158.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:18.503Z,1509700158.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:18.519Z,1509700158.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:18.908Z,1509700158.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:18.924Z,1509700158.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:19.301Z,1509700159.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:19.317Z,1509700159.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:19.709Z,1509700159.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:19.730Z,1509700159.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:20.109Z,1509700160.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:20.125Z,1509700160.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:20.508Z,1509700160.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:20.531Z,1509700160.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:20.908Z,1509700160.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:20.924Z,1509700160.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:21.302Z,1509700161.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:21.323Z,1509700161.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:21.701Z,1509700161.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:21.717Z,1509700161.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:22.103Z,1509700162.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:22.118Z,1509700162.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:22.508Z,1509700162.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:22.523Z,1509700162.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:22.907Z,1509700162.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:22.923Z,1509700162.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:23.310Z,1509700163.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:23.325Z,1509700163.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:23.704Z,1509700163.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:23.720Z,1509700163.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:24.104Z,1509700164.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:24.123Z,1509700164.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:24.504Z,1509700164.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:24.520Z,1509700164.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:24.950Z,1509700164.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:25.006Z,1509700165.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:25.301Z,1509700165.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:25.316Z,1509700165.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:25.714Z,1509700165.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:25.729Z,1509700165.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:26.114Z,1509700166.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:26.129Z,1509700166.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:26.509Z,1509700166.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:26.525Z,1509700166.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:26.903Z,1509700166.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:26.919Z,1509700166.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:27.301Z,1509700167.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:27.323Z,1509700167.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:27.704Z,1509700167.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:27.719Z,1509700167.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:28.103Z,1509700168.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:28.119Z,1509700168.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:28.513Z,1509700168.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:28.535Z,1509700168.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:28.913Z,1509700168.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:28.935Z,1509700168.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:29.320Z,1509700169.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:29.383Z,1509700169.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:29.696Z,1509700169.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:29.722Z,1509700169.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:30.103Z,1509700170.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:30.162Z,1509700170.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:30.501Z,1509700170.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:30.516Z,1509700170.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:30.897Z,1509700170.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:30.958Z,1509700170.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:31.298Z,1509700171.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:31.319Z,1509700171.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:31.712Z,1509700171.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:31.763Z,1509700171.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:32.109Z,1509700172.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:32.125Z,1509700172.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:32.512Z,1509700172.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:32.528Z,1509700172.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:32.911Z,1509700172.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:32.931Z,1509700172.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:33.303Z,1509700173.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:33.323Z,1509700173.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:33.701Z,1509700173.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:33.716Z,1509700173.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:34.101Z,1509700174.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:34.115Z,1509700174.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:34.512Z,1509700174.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:34.528Z,1509700174.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:34.911Z,1509700174.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:34.927Z,1509700174.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:35.313Z,1509700175.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:35.335Z,1509700175.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:35.702Z,1509700175.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:35.723Z,1509700175.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:36.100Z,1509700176.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:36.115Z,1509700176.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:36.501Z,1509700176.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:36.515Z,1509700176.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:36.899Z,1509700176.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:36.914Z,1509700176.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:37.300Z,1509700177.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:37.315Z,1509700177.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:37.713Z,1509700177.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:37.734Z,1509700177.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:38.111Z,1509700178.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:38.131Z,1509700178.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:38.512Z,1509700178.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:38.528Z,1509700178.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:38.947Z,1509700178.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:38.967Z,1509700178.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:39.303Z,1509700179.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:39.323Z,1509700179.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:39.701Z,1509700179.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:39.717Z,1509700179.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:40.102Z,1509700180.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:40.117Z,1509700180.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:40.513Z,1509700180.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:40.529Z,1509700180.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:40.913Z,1509700180.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:40.935Z,1509700180.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:41.313Z,1509700181.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:41.334Z,1509700181.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:41.703Z,1509700181.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:41.723Z,1509700181.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:42.103Z,1509700182.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:42.123Z,1509700182.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:42.504Z,1509700182.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:42.520Z,1509700182.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:42.903Z,1509700182.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:42.923Z,1509700182.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:43.291Z,1509700183.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:43.317Z,1509700183.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:43.713Z,1509700183.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:43.798Z,1509700183.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:44.116Z,1509700184.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:44.132Z,1509700184.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:44.513Z,1509700184.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:44.570Z,1509700184.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:44.912Z,1509700184.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:44.928Z,1509700184.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:48.106Z,1509700188.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:48.166Z,1509700188.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:48.306Z,1509700188.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:48.339Z,1509700188.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:48.761Z,1509700188.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:48.818Z,1509700188.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:49.118Z,1509700189.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:49.133Z,1509700189.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:49.513Z,1509700189.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:49.535Z,1509700189.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:49.903Z,1509700189.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:49.919Z,1509700189.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:50.303Z,1509700190.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:50.323Z,1509700190.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:50.715Z,1509700190.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:50.763Z,1509700190.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:51.092Z,1509700191.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:51.118Z,1509700191.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:51.509Z,1509700191.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:51.524Z,1509700191.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:51.917Z,1509700191.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:51.932Z,1509700191.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:52.317Z,1509700192.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:52.332Z,1509700192.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:52.688Z,1509700192.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:52.718Z,1509700192.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:53.091Z,1509700193.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:53.116Z,1509700193.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:53.495Z,1509700193.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:53.522Z,1509700193.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:53.896Z,1509700193.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:53.921Z,1509700193.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:54.295Z,1509700194.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:54.320Z,1509700194.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:54.717Z,1509700194.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:54.732Z,1509700194.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:55.117Z,1509700195.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:55.132Z,1509700195.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:55.526Z,1509700195.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:55.547Z,1509700195.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:55.895Z,1509700195.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:55.919Z,1509700195.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:56.295Z,1509700196.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:56.310Z,1509700196.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:56.696Z,1509700196.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:56.731Z,1509700196.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:57.091Z,1509700197.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:57.107Z,1509700197.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:57.502Z,1509700197.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:57.525Z,1509700197.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:57.905Z,1509700197.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:57.937Z,1509700197.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:58.309Z,1509700198.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:58.335Z,1509700198.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:58.732Z,1509700198.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:58.748Z,1509700198.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:59.091Z,1509700199.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:59.115Z,1509700199.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:59.492Z,1509700199.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:59.508Z,1509700199.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:09:59.893Z,1509700199.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:09:59.909Z,1509700199.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:00.295Z,1509700200.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:00.315Z,1509700200.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:00.738Z,1509700200.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:00.794Z,1509700200.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:01.106Z,1509700201.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:01.160Z,1509700201.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:01.510Z,1509700201.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:01.534Z,1509700201.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:01.891Z,1509700201.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:01.907Z,1509700201.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:02.292Z,1509700202.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:02.346Z,1509700202.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:02.714Z,1509700202.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:02.763Z,1509700202.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:03.099Z,1509700203.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:03.155Z,1509700203.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:03.501Z,1509700203.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:03.555Z,1509700203.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:03.909Z,1509700203.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:03.941Z,1509700203.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:04.309Z,1509700204.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:04.340Z,1509700204.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:04.730Z,1509700204.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:04.768Z,1509700204.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:05.100Z,1509700205.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:05.115Z,1509700205.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:05.502Z,1509700205.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:05.517Z,1509700205.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:05.903Z,1509700205.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:05.923Z,1509700205.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:06.301Z,1509700206.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:06.316Z,1509700206.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:06.705Z,1509700206.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:06.726Z,1509700206.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:07.117Z,1509700207.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:07.147Z,1509700207.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:07.506Z,1509700207.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:07.521Z,1509700207.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:07.904Z,1509700207.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:07.919Z,1509700207.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:08.301Z,1509700208.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:08.317Z,1509700208.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:08.702Z,1509700208.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:08.717Z,1509700208.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:09.102Z,1509700209.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:09.117Z,1509700209.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:09.510Z,1509700209.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:09.526Z,1509700209.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:09.912Z,1509700209.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:09.927Z,1509700209.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:10.314Z,1509700210.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:10.335Z,1509700210.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:10.702Z,1509700210.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:10.723Z,1509700210.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:11.100Z,1509700211.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:11.123Z,1509700211.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:11.513Z,1509700211.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:11.528Z,1509700211.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:11.903Z,1509700211.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:11.923Z,1509700211.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:12.300Z,1509700212.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:12.324Z,1509700212.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:12.737Z,1509700212.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:12.767Z,1509700212.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:13.114Z,1509700213.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:13.130Z,1509700213.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:13.513Z,1509700213.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:13.528Z,1509700213.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:13.904Z,1509700213.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:13.919Z,1509700213.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:14.301Z,1509700214.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:14.317Z,1509700214.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:14.727Z,1509700214.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:14.767Z,1509700214.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:15.092Z,1509700215.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:15.151Z,1509700215.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:15.514Z,1509700215.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:15.556Z,1509700215.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:15.916Z,1509700215.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:15.931Z,1509700215.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:16.306Z,1509700216.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:16.373Z,1509700216.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:16.735Z,1509700216.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:16.756Z,1509700216.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:17.095Z,1509700217.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:17.143Z,1509700217.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:17.495Z,1509700217.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:17.543Z,1509700217.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:17.900Z,1509700217.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:17.931Z,1509700217.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:18.296Z,1509700218.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:18.324Z,1509700218.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:18.723Z,1509700218.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:18.767Z,1509700218.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:19.102Z,1509700219.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:19.117Z,1509700219.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:19.513Z,1509700219.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:19.545Z,1509700219.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:19.900Z,1509700219.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:19.915Z,1509700219.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:20.296Z,1509700220.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:20.311Z,1509700220.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:20.704Z,1509700220.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:20.719Z,1509700220.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:21.101Z,1509700221.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:21.116Z,1509700221.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:21.506Z,1509700221.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:21.521Z,1509700221.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:21.905Z,1509700221.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:21.920Z,1509700221.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:22.310Z,1509700222.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:22.325Z,1509700222.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:22.700Z,1509700222.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:22.715Z,1509700222.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:23.102Z,1509700223.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:23.117Z,1509700223.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:23.489Z,1509700223.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:23.504Z,1509700223.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:23.893Z,1509700223.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:23.924Z,1509700223.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:24.293Z,1509700224.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:24.309Z,1509700224.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:24.706Z,1509700224.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:24.732Z,1509700224.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:25.120Z,1509700225.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:25.136Z,1509700225.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:25.521Z,1509700225.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:25.552Z,1509700225.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:25.902Z,1509700225.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:25.918Z,1509700225.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:26.303Z,1509700226.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:26.323Z,1509700226.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:26.726Z,1509700226.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:26.755Z,1509700226.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:27.101Z,1509700227.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:27.118Z,1509700227.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:27.508Z,1509700227.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:27.525Z,1509700227.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:27.908Z,1509700227.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:27.924Z,1509700227.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:28.310Z,1509700228.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:28.331Z,1509700228.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:28.725Z,1509700228.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:28.764Z,1509700228.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:29.103Z,1509700229.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:29.119Z,1509700229.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:29.501Z,1509700229.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:29.536Z,1509700229.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:29.904Z,1509700229.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:29.976Z,1509700229.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:30.300Z,1509700230.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:30.315Z,1509700230.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:30.740Z,1509700230.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:30.807Z,1509700230.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:31.111Z,1509700231.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:31.131Z,1509700231.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:31.512Z,1509700231.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:31.563Z,1509700231.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:31.903Z,1509700231.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:31.957Z,1509700231.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:32.296Z,1509700232.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:32.318Z,1509700232.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:32.726Z,1509700232.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:32.768Z,1509700232.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:33.095Z,1509700233.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:33.131Z,1509700233.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:33.501Z,1509700233.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:33.528Z,1509700233.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:33.905Z,1509700233.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:33.935Z,1509700233.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:34.301Z,1509700234.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:34.329Z,1509700234.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:34.688Z,1509700234.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:34.703Z,1509700234.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:35.103Z,1509700235.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:35.128Z,1509700235.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:35.495Z,1509700235.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:35.532Z,1509700235.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:35.892Z,1509700235.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:35.927Z,1509700235.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:36.293Z,1509700236.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:36.308Z,1509700236.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:36.705Z,1509700236.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:36.732Z,1509700236.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:37.102Z,1509700237.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:37.137Z,1509700237.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:37.513Z,1509700237.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:37.528Z,1509700237.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:37.904Z,1509700237.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:37.918Z,1509700237.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:38.288Z,1509700238.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:38.314Z,1509700238.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:38.701Z,1509700238.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:38.723Z,1509700238.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:39.104Z,1509700239.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:39.123Z,1509700239.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:39.520Z,1509700239.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:39.535Z,1509700239.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:39.917Z,1509700239.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:39.933Z,1509700239.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:40.317Z,1509700240.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:40.332Z,1509700240.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:40.761Z,1509700240.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:40.777Z,1509700240.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:41.092Z,1509700241.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:41.118Z,1509700241.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:41.492Z,1509700241.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:41.531Z,1509700241.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:41.894Z,1509700241.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:41.920Z,1509700241.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:42.292Z,1509700242.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:42.318Z,1509700242.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:42.716Z,1509700242.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:42.743Z,1509700242.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:43.113Z,1509700243.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:43.135Z,1509700243.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:43.513Z,1509700243.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:43.582Z,1509700243.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:43.895Z,1509700243.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:43.926Z,1509700243.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:44.292Z,1509700244.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:44.351Z,1509700244.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:44.718Z,1509700244.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:44.754Z,1509700244.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:45.095Z,1509700245.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:45.131Z,1509700245.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:48.330Z,1509700248.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:48.383Z,1509700248.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:48.538Z,1509700248.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:48.553Z,1509700248.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:48.954Z,1509700248.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:49.004Z,1509700249.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:49.324Z,1509700249.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:49.378Z,1509700249.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:49.722Z,1509700249.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:49.737Z,1509700249.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:50.124Z,1509700250.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:50.138Z,1509700250.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:50.533Z,1509700250.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:50.555Z,1509700250.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:50.932Z,1509700250.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:50.955Z,1509700250.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:51.333Z,1509700251.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:51.355Z,1509700251.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:51.721Z,1509700251.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:51.736Z,1509700251.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:52.122Z,1509700252.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:52.137Z,1509700252.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:52.519Z,1509700252.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:52.533Z,1509700252.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:52.918Z,1509700252.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:52.933Z,1509700252.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:53.318Z,1509700253.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:53.337Z,1509700253.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:53.698Z,1509700253.698 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T09:10:53.698Z,1509700253.698 [NAL9602] Data Fault, FailCount= 4
2017-11-03T09:10:53.698Z,1509700253.698 [NAL9602](ERROR): Data Fault
2017-11-03T09:10:53.735Z,1509700253.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:53.749Z,1509700253.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:53.844Z,1509700253.844 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T09:10:54.032Z,1509700254.032 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:10:54.032Z,1509700254.032 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T09:10:54.032Z,1509700254.032 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:10:54.090Z,1509700254.090 [NAL9602](INFO): Powering down
2017-11-03T09:10:54.108Z,1509700254.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:54.143Z,1509700254.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:10:54.148Z,1509700254.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:54.249Z,1509700254.249 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:10:54.436Z,1509700254.436 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:10:54.523Z,1509700254.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:54.552Z,1509700254.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:10:54.553Z,1509700254.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:54.698Z,1509700254.698 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:10:54.911Z,1509700254.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:54.942Z,1509700254.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:10:54.943Z,1509700254.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:55.025Z,1509700255.025 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T09:10:55.025Z,1509700255.025 [NAL9602] No Fault, FailCount= 4
2017-11-03T09:10:55.314Z,1509700255.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:55.341Z,1509700255.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:10:55.342Z,1509700255.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:55.712Z,1509700255.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:55.741Z,1509700255.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:10:55.742Z,1509700255.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:56.112Z,1509700256.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:56.141Z,1509700256.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:10:56.142Z,1509700256.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:56.232Z,1509700256.232 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:10:56.232Z,1509700256.232 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T09:10:56.312Z,1509700256.312 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:10:56.313Z,1509700256.313 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:10:56.313Z,1509700256.313 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:10:56.313Z,1509700256.313 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:10:56.514Z,1509700256.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:56.541Z,1509700256.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:10:56.542Z,1509700256.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:56.912Z,1509700256.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:56.942Z,1509700256.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:10:56.943Z,1509700256.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:57.309Z,1509700257.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:57.341Z,1509700257.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:10:57.343Z,1509700257.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:57.715Z,1509700257.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:57.758Z,1509700257.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:10:57.759Z,1509700257.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:58.112Z,1509700258.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:58.146Z,1509700258.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:10:58.147Z,1509700258.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:58.515Z,1509700258.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:58.541Z,1509700258.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:10:58.542Z,1509700258.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:58.934Z,1509700258.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:58.954Z,1509700258.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:10:58.955Z,1509700258.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:59.358Z,1509700259.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:59.372Z,1509700259.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:10:59.373Z,1509700259.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:10:59.710Z,1509700259.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:10:59.725Z,1509700259.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:10:59.726Z,1509700259.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:00.117Z,1509700260.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:00.144Z,1509700260.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:11:00.153Z,1509700260.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:00.532Z,1509700260.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:00.576Z,1509700260.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:11:00.577Z,1509700260.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:00.580Z,1509700260.580 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:11:00.755Z,1509700260.755 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:11:00.760Z,1509700260.760 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:11:00.761Z,1509700260.761 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:11:00.762Z,1509700260.762 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:11:00.930Z,1509700260.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:00.990Z,1509700260.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:11:00.991Z,1509700260.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:01.312Z,1509700261.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:01.467Z,1509700261.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:01.732Z,1509700261.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:01.799Z,1509700261.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:02.133Z,1509700262.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:02.173Z,1509700262.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:02.529Z,1509700262.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:02.604Z,1509700262.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:02.922Z,1509700262.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:02.965Z,1509700262.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:03.324Z,1509700263.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:03.372Z,1509700263.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:03.737Z,1509700263.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:03.819Z,1509700263.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:04.166Z,1509700264.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:04.212Z,1509700264.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:04.529Z,1509700264.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:04.564Z,1509700264.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:04.922Z,1509700264.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:04.966Z,1509700264.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:05.353Z,1509700265.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:05.410Z,1509700265.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:05.717Z,1509700265.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:05.770Z,1509700265.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:06.129Z,1509700266.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:06.173Z,1509700266.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:06.556Z,1509700266.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:06.621Z,1509700266.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:06.920Z,1509700266.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:06.935Z,1509700266.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:07.335Z,1509700267.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:07.389Z,1509700267.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:07.738Z,1509700267.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:07.844Z,1509700267.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:08.113Z,1509700268.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:08.152Z,1509700268.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:08.538Z,1509700268.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:08.563Z,1509700268.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:08.914Z,1509700268.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:08.956Z,1509700268.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:09.313Z,1509700269.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:09.355Z,1509700269.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:09.714Z,1509700269.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:09.763Z,1509700269.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:10.112Z,1509700270.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:10.157Z,1509700270.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:10.530Z,1509700270.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:10.566Z,1509700270.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:10.917Z,1509700270.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:10.957Z,1509700270.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:11.321Z,1509700271.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:11.374Z,1509700271.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:11.721Z,1509700271.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:11.745Z,1509700271.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:12.123Z,1509700272.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:12.147Z,1509700272.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:12.522Z,1509700272.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:12.574Z,1509700272.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:12.913Z,1509700272.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:12.968Z,1509700272.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:13.312Z,1509700273.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:13.349Z,1509700273.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:13.712Z,1509700273.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:13.787Z,1509700273.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:14.112Z,1509700274.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:14.145Z,1509700274.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:14.514Z,1509700274.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:14.562Z,1509700274.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:14.913Z,1509700274.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:14.964Z,1509700274.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:15.312Z,1509700275.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:15.349Z,1509700275.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:15.739Z,1509700275.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:15.810Z,1509700275.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:16.108Z,1509700276.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:16.166Z,1509700276.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:16.508Z,1509700276.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:16.523Z,1509700276.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:16.911Z,1509700276.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:16.959Z,1509700276.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:17.312Z,1509700277.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:17.344Z,1509700277.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:17.714Z,1509700277.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:17.763Z,1509700277.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:18.115Z,1509700278.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:18.170Z,1509700278.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:18.514Z,1509700278.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:18.551Z,1509700278.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:18.923Z,1509700278.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:18.949Z,1509700278.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:19.315Z,1509700279.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:19.350Z,1509700279.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:19.708Z,1509700279.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:19.724Z,1509700279.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:20.114Z,1509700280.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:20.152Z,1509700280.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:20.511Z,1509700280.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:20.552Z,1509700280.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:20.943Z,1509700280.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:20.958Z,1509700280.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:21.314Z,1509700281.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:21.352Z,1509700281.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:21.712Z,1509700281.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:21.727Z,1509700281.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:22.115Z,1509700282.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:22.130Z,1509700282.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:22.515Z,1509700282.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:22.535Z,1509700282.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:22.915Z,1509700282.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:22.931Z,1509700282.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:23.315Z,1509700283.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:23.331Z,1509700283.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:23.715Z,1509700283.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:23.731Z,1509700283.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:24.095Z,1509700284.095 [NAL9602](INFO): Powering up NAL9602
2017-11-03T09:11:24.114Z,1509700284.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:24.130Z,1509700284.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:24.512Z,1509700284.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:24.528Z,1509700284.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:24.908Z,1509700284.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:24.923Z,1509700284.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:25.312Z,1509700285.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:25.330Z,1509700285.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:25.711Z,1509700285.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:25.731Z,1509700285.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:26.114Z,1509700286.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:26.130Z,1509700286.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:26.512Z,1509700286.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:26.528Z,1509700286.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:26.912Z,1509700286.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:26.935Z,1509700286.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:27.312Z,1509700287.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:27.327Z,1509700287.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:27.714Z,1509700287.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:27.735Z,1509700287.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:28.114Z,1509700288.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:28.134Z,1509700288.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:28.510Z,1509700288.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:28.530Z,1509700288.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:28.912Z,1509700288.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:28.929Z,1509700288.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:29.308Z,1509700289.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:29.330Z,1509700289.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:29.715Z,1509700289.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:29.730Z,1509700289.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:30.170Z,1509700290.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:30.215Z,1509700290.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:30.512Z,1509700290.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:30.528Z,1509700290.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:30.914Z,1509700290.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:30.930Z,1509700290.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:31.312Z,1509700291.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:31.348Z,1509700291.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:31.715Z,1509700291.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:31.739Z,1509700291.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:32.107Z,1509700292.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:32.135Z,1509700292.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:32.511Z,1509700292.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:32.535Z,1509700292.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:32.915Z,1509700292.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:32.939Z,1509700292.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:33.332Z,1509700293.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:33.348Z,1509700293.348 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:11:33.348Z,1509700293.348 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:11:33.348Z,1509700293.348 [BPC1](ERROR): Communications Fault
2017-11-03T09:11:33.359Z,1509700293.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:33.461Z,1509700293.461 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:11:33.724Z,1509700293.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:33.760Z,1509700293.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:34.112Z,1509700294.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:34.140Z,1509700294.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:34.515Z,1509700294.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:34.541Z,1509700294.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:34.629Z,1509700294.629 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:11:34.630Z,1509700294.630 [BPC1] No Fault, FailCount= 1
2017-11-03T09:11:34.949Z,1509700294.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:35.055Z,1509700295.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:35.295Z,1509700295.295 [NAL9602](INFO): NAL9602 initialized
2017-11-03T09:11:35.313Z,1509700295.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:35.349Z,1509700295.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:35.713Z,1509700295.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:35.747Z,1509700295.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:36.138Z,1509700296.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:36.196Z,1509700296.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:36.534Z,1509700296.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:36.549Z,1509700296.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:36.935Z,1509700296.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:36.954Z,1509700296.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:37.311Z,1509700297.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:37.343Z,1509700297.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:37.713Z,1509700297.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:37.741Z,1509700297.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:38.113Z,1509700298.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:38.129Z,1509700298.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:38.513Z,1509700298.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:38.529Z,1509700298.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:38.926Z,1509700298.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:38.952Z,1509700298.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:39.342Z,1509700299.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:39.363Z,1509700299.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:39.726Z,1509700299.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:39.752Z,1509700299.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:40.113Z,1509700300.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:40.129Z,1509700300.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:40.515Z,1509700300.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:40.531Z,1509700300.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:40.920Z,1509700300.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:40.956Z,1509700300.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:41.319Z,1509700301.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:41.355Z,1509700301.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:41.734Z,1509700301.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:41.763Z,1509700301.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:42.128Z,1509700302.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:42.143Z,1509700302.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:42.529Z,1509700302.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:42.551Z,1509700302.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:42.921Z,1509700302.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:42.936Z,1509700302.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:43.324Z,1509700303.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:43.339Z,1509700303.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:43.721Z,1509700303.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:43.737Z,1509700303.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:44.125Z,1509700304.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:44.140Z,1509700304.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:44.521Z,1509700304.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:44.537Z,1509700304.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:44.540Z,1509700304.540 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T09:11:44.540Z,1509700304.540 [Default:CheckIn:C.Wait] Stopped
2017-11-03T09:11:44.540Z,1509700304.540 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T09:11:44.540Z,1509700304.540 [Default:CheckIn:D] Running Loop=1
2017-11-03T09:11:44.942Z,1509700304.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:44.971Z,1509700304.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:44.974Z,1509700304.974 [Default:CheckIn:D] Stopped
2017-11-03T09:11:44.975Z,1509700304.975 [Default:CheckIn:E] Running Loop=1
2017-11-03T09:11:45.331Z,1509700305.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:45.351Z,1509700305.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:45.371Z,1509700305.371 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 536.623470 min 
2017-11-03T09:11:45.371Z,1509700305.371 [Default:CheckIn:E] Stopped
2017-11-03T09:11:45.371Z,1509700305.371 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T09:11:45.371Z,1509700305.371 [Default:CheckIn] Stopped
2017-11-03T09:11:45.371Z,1509700305.371 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T09:11:45.371Z,1509700305.371 [Default:CheckIn](INFO): Running loop #53
2017-11-03T09:11:45.371Z,1509700305.371 [Default:CheckIn] Running Loop=53
2017-11-03T09:11:45.372Z,1509700305.372 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T09:11:45.372Z,1509700305.372 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T09:11:48.527Z,1509700308.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:48.623Z,1509700308.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:48.752Z,1509700308.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:48.803Z,1509700308.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:49.151Z,1509700309.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:49.220Z,1509700309.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:49.567Z,1509700309.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:49.583Z,1509700309.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:49.953Z,1509700309.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:50.019Z,1509700310.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:50.352Z,1509700310.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:50.379Z,1509700310.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:50.767Z,1509700310.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:50.829Z,1509700310.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:51.217Z,1509700311.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:51.252Z,1509700311.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:51.565Z,1509700311.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:51.607Z,1509700311.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:51.956Z,1509700311.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:51.971Z,1509700311.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:52.360Z,1509700312.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:52.383Z,1509700312.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:52.762Z,1509700312.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:52.776Z,1509700312.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:53.157Z,1509700313.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:53.236Z,1509700313.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:53.560Z,1509700313.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:53.605Z,1509700313.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:53.965Z,1509700313.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:53.981Z,1509700313.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:54.369Z,1509700314.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:54.385Z,1509700314.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:54.770Z,1509700314.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:54.785Z,1509700314.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:55.161Z,1509700315.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:55.177Z,1509700315.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:55.556Z,1509700315.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:55.571Z,1509700315.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:55.961Z,1509700315.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:55.976Z,1509700315.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:56.363Z,1509700316.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:56.378Z,1509700316.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:56.768Z,1509700316.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:56.795Z,1509700316.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:56.901Z,1509700316.901 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T09:11:57.169Z,1509700317.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:57.185Z,1509700317.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:57.568Z,1509700317.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:57.584Z,1509700317.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:57.935Z,1509700317.935 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T09:11:57.935Z,1509700317.935 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T09:11:57.935Z,1509700317.935 [DropWeight](ERROR): Hardware Fault
2017-11-03T09:11:57.964Z,1509700317.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:57.991Z,1509700317.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:58.079Z,1509700318.079 [CBIT](INFO): Critical error at 20171103T091157
2017-11-03T09:11:58.081Z,1509700318.081 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T09:11:58.081Z,1509700318.081 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T09:11:58.362Z,1509700318.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:58.383Z,1509700318.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:58.503Z,1509700318.503 [CBIT](INFO): Critical error at 20171103T091158
2017-11-03T09:11:58.763Z,1509700318.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:58.779Z,1509700318.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:59.163Z,1509700319.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:59.179Z,1509700319.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:59.560Z,1509700319.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:59.575Z,1509700319.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:11:59.969Z,1509700319.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:11:59.984Z,1509700319.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:00.372Z,1509700320.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:00.388Z,1509700320.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:00.785Z,1509700320.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:00.826Z,1509700320.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:01.160Z,1509700321.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:01.187Z,1509700321.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:01.562Z,1509700321.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:01.603Z,1509700321.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:01.953Z,1509700321.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:01.981Z,1509700321.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:02.354Z,1509700322.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:02.380Z,1509700322.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:02.770Z,1509700322.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:02.828Z,1509700322.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:03.171Z,1509700323.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:03.194Z,1509700323.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:03.574Z,1509700323.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:03.631Z,1509700323.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:03.632Z,1509700323.632 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 179
2017-11-03T09:12:03.632Z,1509700323.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:12:03.634Z,1509700323.634 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:03.634Z,1509700323.634 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 179
2017-11-03T09:12:03.634Z,1509700323.634 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:12:03.636Z,1509700323.636 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:03.636Z,1509700323.636 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 179
2017-11-03T09:12:03.636Z,1509700323.636 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:12:03.718Z,1509700323.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:12:03.718Z,1509700323.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:12:03.718Z,1509700323.718 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:12:03.963Z,1509700323.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:04.076Z,1509700324.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:12:04.077Z,1509700324.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 179
2017-11-03T09:12:04.077Z,1509700324.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:12:04.077Z,1509700324.077 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 179
2017-11-03T09:12:04.078Z,1509700324.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:12:04.078Z,1509700324.078 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 179
2017-11-03T09:12:04.354Z,1509700324.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:04.409Z,1509700324.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:12:04.409Z,1509700324.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:12:04.410Z,1509700324.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:12:04.410Z,1509700324.410 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:12:04.410Z,1509700324.410 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:12:04.411Z,1509700324.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:12:04.411Z,1509700324.411 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:12:04.411Z,1509700324.411 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:12:04.412Z,1509700324.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:12:04.755Z,1509700324.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:04.807Z,1509700324.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:05.156Z,1509700325.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:05.239Z,1509700325.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:05.552Z,1509700325.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:05.568Z,1509700325.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:05.970Z,1509700325.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:06.001Z,1509700326.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:06.365Z,1509700326.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:06.399Z,1509700326.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:06.769Z,1509700326.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:06.799Z,1509700326.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:07.196Z,1509700327.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:07.256Z,1509700327.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:07.552Z,1509700327.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:07.567Z,1509700327.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:07.959Z,1509700327.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:07.997Z,1509700327.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:08.352Z,1509700328.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:08.367Z,1509700328.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:08.769Z,1509700328.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:08.794Z,1509700328.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:09.165Z,1509700329.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:09.197Z,1509700329.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:09.565Z,1509700329.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:09.602Z,1509700329.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:09.957Z,1509700329.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:09.972Z,1509700329.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:10.356Z,1509700330.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:10.371Z,1509700330.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:10.766Z,1509700330.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:10.798Z,1509700330.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:11.157Z,1509700331.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:11.179Z,1509700331.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:11.559Z,1509700331.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:11.579Z,1509700331.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:11.974Z,1509700331.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:12.010Z,1509700332.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:12.374Z,1509700332.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:12.407Z,1509700332.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:12.769Z,1509700332.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:12.784Z,1509700332.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:13.161Z,1509700333.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:13.177Z,1509700333.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:13.564Z,1509700333.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:13.587Z,1509700333.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:13.962Z,1509700333.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:13.977Z,1509700333.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:14.360Z,1509700334.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:14.382Z,1509700334.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:14.789Z,1509700334.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:14.819Z,1509700334.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:15.168Z,1509700335.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:15.184Z,1509700335.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:15.568Z,1509700335.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:15.634Z,1509700335.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:15.962Z,1509700335.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:15.983Z,1509700335.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:16.359Z,1509700336.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:16.375Z,1509700336.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:16.762Z,1509700336.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:16.778Z,1509700336.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:17.157Z,1509700337.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:17.178Z,1509700337.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:17.559Z,1509700337.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:17.575Z,1509700337.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:17.972Z,1509700337.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:17.987Z,1509700337.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:18.372Z,1509700338.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:18.391Z,1509700338.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:18.771Z,1509700338.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:18.791Z,1509700338.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:19.190Z,1509700339.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:19.267Z,1509700339.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:19.562Z,1509700339.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:19.595Z,1509700339.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:19.960Z,1509700339.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:19.969Z,1509700339.969 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:12:19.969Z,1509700339.969 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:12:19.969Z,1509700339.969 [BPC1](ERROR): Communications Fault
2017-11-03T09:12:19.977Z,1509700339.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:20.077Z,1509700340.077 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:12:20.362Z,1509700340.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:20.383Z,1509700340.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:20.769Z,1509700340.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:20.784Z,1509700340.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:21.179Z,1509700341.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:21.241Z,1509700341.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:21.361Z,1509700341.361 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:12:21.361Z,1509700341.361 [BPC1] No Fault, FailCount= 1
2017-11-03T09:12:21.573Z,1509700341.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:21.651Z,1509700341.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:21.961Z,1509700341.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:21.983Z,1509700341.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:22.360Z,1509700342.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:22.378Z,1509700342.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:22.771Z,1509700342.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:22.790Z,1509700342.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:23.163Z,1509700343.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:23.178Z,1509700343.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:23.563Z,1509700343.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:23.583Z,1509700343.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:23.974Z,1509700343.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:23.991Z,1509700343.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:24.374Z,1509700344.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:24.389Z,1509700344.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:24.776Z,1509700344.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:24.791Z,1509700344.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:25.162Z,1509700345.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:25.178Z,1509700345.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:25.565Z,1509700345.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:25.618Z,1509700345.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:25.963Z,1509700345.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:25.978Z,1509700345.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:26.365Z,1509700346.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:26.387Z,1509700346.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:26.777Z,1509700346.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:26.792Z,1509700346.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:27.174Z,1509700347.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:27.192Z,1509700347.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:27.575Z,1509700347.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:27.590Z,1509700347.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:27.965Z,1509700347.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:27.981Z,1509700347.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:28.352Z,1509700348.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:28.378Z,1509700348.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:28.794Z,1509700348.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:28.822Z,1509700348.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:29.149Z,1509700349.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:29.191Z,1509700349.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:29.561Z,1509700349.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:29.577Z,1509700349.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:29.974Z,1509700349.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:29.989Z,1509700349.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:30.369Z,1509700350.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:30.384Z,1509700350.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:30.769Z,1509700350.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:30.784Z,1509700350.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:31.151Z,1509700351.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:31.177Z,1509700351.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:31.562Z,1509700351.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:31.583Z,1509700351.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:31.961Z,1509700351.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:31.975Z,1509700351.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:32.360Z,1509700352.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:32.383Z,1509700352.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:32.772Z,1509700352.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:32.788Z,1509700352.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:33.218Z,1509700353.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:33.285Z,1509700353.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:33.574Z,1509700353.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:33.618Z,1509700353.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:33.951Z,1509700353.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:33.976Z,1509700353.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:34.352Z,1509700354.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:34.376Z,1509700354.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:34.752Z,1509700354.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:34.779Z,1509700354.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:35.155Z,1509700355.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:35.253Z,1509700355.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:35.557Z,1509700355.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:35.598Z,1509700355.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:35.970Z,1509700355.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:36.001Z,1509700356.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:36.361Z,1509700356.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:36.435Z,1509700356.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:36.773Z,1509700356.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:36.808Z,1509700356.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:37.156Z,1509700357.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:37.211Z,1509700357.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:37.554Z,1509700357.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:37.569Z,1509700357.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:37.957Z,1509700357.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:38.007Z,1509700358.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:38.356Z,1509700358.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:38.417Z,1509700358.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:38.773Z,1509700358.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:38.802Z,1509700358.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:39.169Z,1509700359.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:39.201Z,1509700359.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:39.566Z,1509700359.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:39.581Z,1509700359.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:39.959Z,1509700359.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:39.974Z,1509700359.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:40.357Z,1509700360.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:40.372Z,1509700360.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:40.766Z,1509700360.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:40.781Z,1509700360.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:41.156Z,1509700361.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:41.175Z,1509700361.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:41.558Z,1509700361.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:41.573Z,1509700361.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:41.966Z,1509700361.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:41.987Z,1509700361.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:42.364Z,1509700362.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:42.379Z,1509700362.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:42.811Z,1509700362.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:42.831Z,1509700362.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:43.161Z,1509700363.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:43.203Z,1509700363.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:43.558Z,1509700363.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:43.579Z,1509700363.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:43.958Z,1509700363.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:43.974Z,1509700363.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:44.361Z,1509700364.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:44.383Z,1509700364.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:44.766Z,1509700364.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:44.782Z,1509700364.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:45.181Z,1509700365.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:45.204Z,1509700365.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:45.570Z,1509700365.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:45.585Z,1509700365.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:48.795Z,1509700368.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:48.819Z,1509700368.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:48.940Z,1509700368.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:49.015Z,1509700369.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:49.364Z,1509700369.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:49.430Z,1509700369.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:49.770Z,1509700369.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:49.785Z,1509700369.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:50.161Z,1509700370.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:50.215Z,1509700370.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:50.541Z,1509700370.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:50.575Z,1509700370.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:50.948Z,1509700370.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:51.018Z,1509700371.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:51.337Z,1509700371.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:51.395Z,1509700371.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:51.763Z,1509700371.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:51.778Z,1509700371.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:52.165Z,1509700372.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:52.180Z,1509700372.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:52.561Z,1509700372.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:52.582Z,1509700372.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:52.951Z,1509700372.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:52.980Z,1509700372.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:53.340Z,1509700373.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:53.355Z,1509700373.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:53.740Z,1509700373.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:53.754Z,1509700373.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:54.141Z,1509700374.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:54.156Z,1509700374.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:54.540Z,1509700374.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:54.555Z,1509700374.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:54.967Z,1509700374.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:54.982Z,1509700374.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:55.353Z,1509700375.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:55.378Z,1509700375.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:55.754Z,1509700375.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:55.778Z,1509700375.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:56.140Z,1509700376.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:56.154Z,1509700376.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:56.324Z,1509700376.324 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:12:56.324Z,1509700376.324 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T09:12:56.324Z,1509700376.324 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:12:56.544Z,1509700376.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:56.559Z,1509700376.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:12:56.560Z,1509700376.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:56.669Z,1509700376.669 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:12:56.729Z,1509700376.729 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:12:56.854Z,1509700376.854 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:12:56.954Z,1509700376.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:56.970Z,1509700376.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:12:56.971Z,1509700376.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:57.348Z,1509700377.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:57.362Z,1509700377.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:12:57.364Z,1509700377.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:57.761Z,1509700377.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:57.794Z,1509700377.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:12:57.795Z,1509700377.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:58.162Z,1509700378.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:58.193Z,1509700378.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:12:58.194Z,1509700378.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:58.289Z,1509700378.289 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:12:58.289Z,1509700378.289 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T09:12:58.468Z,1509700378.468 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:12:58.469Z,1509700378.469 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:12:58.469Z,1509700378.469 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:12:58.469Z,1509700378.469 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:12:58.553Z,1509700378.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:58.568Z,1509700378.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:12:58.569Z,1509700378.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:58.951Z,1509700378.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:58.970Z,1509700378.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:12:58.972Z,1509700378.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:59.351Z,1509700379.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:59.370Z,1509700379.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:12:59.372Z,1509700379.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:12:59.749Z,1509700379.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:12:59.763Z,1509700379.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:12:59.765Z,1509700379.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:00.153Z,1509700380.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:00.167Z,1509700380.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:13:00.169Z,1509700380.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:00.551Z,1509700380.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:00.566Z,1509700380.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:13:00.567Z,1509700380.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:00.953Z,1509700380.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:00.968Z,1509700380.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:13:00.969Z,1509700380.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:01.358Z,1509700381.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:01.372Z,1509700381.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:13:01.373Z,1509700381.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:01.752Z,1509700381.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:01.767Z,1509700381.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:13:01.769Z,1509700381.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:02.150Z,1509700382.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:02.227Z,1509700382.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T09:13:02.228Z,1509700382.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:02.570Z,1509700382.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:02.608Z,1509700382.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T09:13:02.613Z,1509700382.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:02.705Z,1509700382.705 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:13:02.801Z,1509700382.801 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:13:02.802Z,1509700382.802 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:13:02.803Z,1509700382.803 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:13:02.803Z,1509700382.803 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:13:02.949Z,1509700382.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:03.015Z,1509700383.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T09:13:03.018Z,1509700383.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:03.353Z,1509700383.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:03.368Z,1509700383.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:03.769Z,1509700383.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:03.815Z,1509700383.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:04.157Z,1509700384.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:04.203Z,1509700384.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:04.553Z,1509700384.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:04.568Z,1509700384.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:04.951Z,1509700384.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:04.966Z,1509700384.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:05.351Z,1509700385.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:05.366Z,1509700385.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:05.751Z,1509700385.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:05.771Z,1509700385.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:06.152Z,1509700386.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:06.167Z,1509700386.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:06.548Z,1509700386.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:06.563Z,1509700386.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:06.965Z,1509700386.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:06.997Z,1509700386.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:07.358Z,1509700387.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:07.373Z,1509700387.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:07.755Z,1509700387.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:07.775Z,1509700387.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:08.150Z,1509700388.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:08.165Z,1509700388.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:08.552Z,1509700388.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:08.567Z,1509700388.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:08.953Z,1509700388.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:08.969Z,1509700388.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:09.350Z,1509700389.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:09.367Z,1509700389.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:09.754Z,1509700389.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:09.770Z,1509700389.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:10.157Z,1509700390.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:10.173Z,1509700390.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:10.553Z,1509700390.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:10.569Z,1509700390.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:10.956Z,1509700390.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:10.972Z,1509700390.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:11.347Z,1509700391.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:11.367Z,1509700391.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:11.744Z,1509700391.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:11.759Z,1509700391.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:12.156Z,1509700392.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:12.171Z,1509700392.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:12.543Z,1509700392.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:12.569Z,1509700392.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:12.968Z,1509700392.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:12.983Z,1509700392.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:13.358Z,1509700393.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:13.373Z,1509700393.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:13.761Z,1509700393.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:13.777Z,1509700393.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:14.142Z,1509700394.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:14.168Z,1509700394.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:14.543Z,1509700394.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:14.595Z,1509700394.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:14.960Z,1509700394.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:15.027Z,1509700395.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:15.343Z,1509700395.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:15.378Z,1509700395.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:15.754Z,1509700395.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:15.780Z,1509700395.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:16.165Z,1509700396.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:16.219Z,1509700396.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:16.549Z,1509700396.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:16.582Z,1509700396.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:16.980Z,1509700396.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:17.043Z,1509700397.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:17.337Z,1509700397.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:17.384Z,1509700397.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:17.736Z,1509700397.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:17.751Z,1509700397.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:18.138Z,1509700398.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:18.153Z,1509700398.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:18.543Z,1509700398.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:18.577Z,1509700398.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:18.979Z,1509700398.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:18.994Z,1509700398.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:19.361Z,1509700399.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:19.385Z,1509700399.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:19.754Z,1509700399.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:19.786Z,1509700399.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:20.145Z,1509700400.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:20.161Z,1509700400.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:20.545Z,1509700400.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:20.561Z,1509700400.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:20.946Z,1509700400.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:20.962Z,1509700400.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:21.347Z,1509700401.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:21.363Z,1509700401.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:21.757Z,1509700401.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:21.790Z,1509700401.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:22.157Z,1509700402.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:22.193Z,1509700402.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:22.558Z,1509700402.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:22.589Z,1509700402.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:22.951Z,1509700402.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:22.966Z,1509700402.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:23.344Z,1509700403.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:23.360Z,1509700403.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:23.744Z,1509700403.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:23.759Z,1509700403.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:24.144Z,1509700404.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:24.159Z,1509700404.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:24.544Z,1509700404.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:24.559Z,1509700404.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:24.966Z,1509700404.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:24.990Z,1509700404.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:25.357Z,1509700405.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:25.392Z,1509700405.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:25.758Z,1509700405.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:25.785Z,1509700405.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:26.148Z,1509700406.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:26.162Z,1509700406.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:26.548Z,1509700406.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:26.563Z,1509700406.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:26.956Z,1509700406.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:26.971Z,1509700406.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:27.348Z,1509700407.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:27.363Z,1509700407.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:27.761Z,1509700407.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:27.813Z,1509700407.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:28.150Z,1509700408.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:28.214Z,1509700408.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:28.553Z,1509700408.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:28.568Z,1509700408.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:28.952Z,1509700408.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:28.968Z,1509700408.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:29.350Z,1509700409.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:29.403Z,1509700409.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:29.748Z,1509700409.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:29.763Z,1509700409.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:30.145Z,1509700410.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:30.195Z,1509700410.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:30.550Z,1509700410.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:30.603Z,1509700410.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:30.990Z,1509700410.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:31.006Z,1509700411.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:31.358Z,1509700411.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:31.375Z,1509700411.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:31.756Z,1509700411.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:31.771Z,1509700411.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:32.150Z,1509700412.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:32.166Z,1509700412.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:32.551Z,1509700412.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:32.570Z,1509700412.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:32.946Z,1509700412.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:32.961Z,1509700412.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:33.355Z,1509700413.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:33.370Z,1509700413.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:33.757Z,1509700413.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:33.772Z,1509700413.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:34.158Z,1509700414.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:34.173Z,1509700414.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:34.556Z,1509700414.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:34.570Z,1509700414.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:34.951Z,1509700414.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:34.965Z,1509700414.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:35.356Z,1509700415.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:35.371Z,1509700415.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:35.750Z,1509700415.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:35.771Z,1509700415.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:36.152Z,1509700416.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:36.166Z,1509700416.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:36.551Z,1509700416.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:36.566Z,1509700416.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:36.969Z,1509700416.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:36.984Z,1509700416.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:37.366Z,1509700417.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:37.381Z,1509700417.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:37.761Z,1509700417.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:37.777Z,1509700417.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:38.142Z,1509700418.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:38.173Z,1509700418.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:38.542Z,1509700418.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:38.574Z,1509700418.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:38.956Z,1509700418.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:38.989Z,1509700418.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:39.340Z,1509700419.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:39.356Z,1509700419.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:39.757Z,1509700419.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:39.781Z,1509700419.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:40.158Z,1509700420.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:40.192Z,1509700420.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:40.549Z,1509700420.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:40.570Z,1509700420.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:40.949Z,1509700420.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:40.964Z,1509700420.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:41.349Z,1509700421.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:41.410Z,1509700421.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:41.748Z,1509700421.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:41.800Z,1509700421.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:42.146Z,1509700422.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:42.161Z,1509700422.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:42.551Z,1509700422.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:42.571Z,1509700422.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:42.974Z,1509700422.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:43.034Z,1509700423.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:43.368Z,1509700423.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:43.383Z,1509700423.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:43.755Z,1509700423.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:43.822Z,1509700423.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:44.143Z,1509700424.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:44.184Z,1509700424.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:44.547Z,1509700424.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:44.576Z,1509700424.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:44.986Z,1509700424.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:45.001Z,1509700425.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:45.343Z,1509700425.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:45.368Z,1509700425.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:45.754Z,1509700425.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:45.787Z,1509700425.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:48.966Z,1509700428.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:48.982Z,1509700428.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:49.136Z,1509700429.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:49.234Z,1509700429.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:49.529Z,1509700429.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:49.544Z,1509700429.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:49.930Z,1509700429.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:49.945Z,1509700429.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:50.327Z,1509700430.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:50.342Z,1509700430.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:50.737Z,1509700430.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:50.752Z,1509700430.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:51.134Z,1509700431.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:51.149Z,1509700431.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:51.533Z,1509700431.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:51.549Z,1509700431.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:51.925Z,1509700431.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:51.940Z,1509700431.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:52.330Z,1509700432.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:52.345Z,1509700432.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:52.738Z,1509700432.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:52.759Z,1509700432.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:53.130Z,1509700433.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:53.145Z,1509700433.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:53.530Z,1509700433.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:53.545Z,1509700433.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:53.933Z,1509700433.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:53.951Z,1509700433.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:54.337Z,1509700434.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:54.352Z,1509700434.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:54.754Z,1509700434.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:54.781Z,1509700434.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:55.129Z,1509700435.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:55.197Z,1509700435.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:55.530Z,1509700435.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:55.545Z,1509700435.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:55.931Z,1509700435.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:55.946Z,1509700435.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:56.330Z,1509700436.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:56.344Z,1509700436.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:56.780Z,1509700436.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:56.811Z,1509700436.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:57.136Z,1509700437.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:57.179Z,1509700437.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:57.535Z,1509700437.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:57.551Z,1509700437.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:57.931Z,1509700437.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:57.946Z,1509700437.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:58.329Z,1509700438.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:58.344Z,1509700438.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:58.728Z,1509700438.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:58.743Z,1509700438.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:59.128Z,1509700439.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:59.151Z,1509700439.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:59.529Z,1509700439.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:59.537Z,1509700439.537 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:13:59.537Z,1509700439.537 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:13:59.537Z,1509700439.537 [BPC1](ERROR): Communications Fault
2017-11-03T09:13:59.546Z,1509700439.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:13:59.645Z,1509700439.645 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:13:59.937Z,1509700439.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:13:59.952Z,1509700439.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:00.341Z,1509700440.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:00.357Z,1509700440.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:00.737Z,1509700440.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:00.752Z,1509700440.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:00.845Z,1509700440.845 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:14:00.845Z,1509700440.845 [BPC1] No Fault, FailCount= 1
2017-11-03T09:14:01.131Z,1509700441.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:01.252Z,1509700441.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:01.530Z,1509700441.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:01.546Z,1509700441.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:01.928Z,1509700441.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:01.945Z,1509700441.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:02.328Z,1509700442.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:02.344Z,1509700442.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:02.737Z,1509700442.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:02.785Z,1509700442.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:03.140Z,1509700443.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:03.194Z,1509700443.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:03.541Z,1509700443.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:03.557Z,1509700443.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:03.920Z,1509700443.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:03.955Z,1509700443.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:04.320Z,1509700444.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:04.355Z,1509700444.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:04.719Z,1509700444.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:04.754Z,1509700444.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:05.118Z,1509700445.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:05.133Z,1509700445.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:05.523Z,1509700445.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:05.555Z,1509700445.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:05.933Z,1509700445.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:05.957Z,1509700445.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:06.333Z,1509700446.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:06.356Z,1509700446.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:06.758Z,1509700446.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:06.773Z,1509700446.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:07.123Z,1509700447.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:07.154Z,1509700447.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:07.523Z,1509700447.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:07.546Z,1509700447.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:07.924Z,1509700447.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:07.956Z,1509700447.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:08.320Z,1509700448.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:08.335Z,1509700448.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:08.737Z,1509700448.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:08.770Z,1509700448.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:09.138Z,1509700449.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:09.171Z,1509700449.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:09.533Z,1509700449.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:09.559Z,1509700449.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:09.921Z,1509700449.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:09.963Z,1509700449.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:10.321Z,1509700450.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:10.336Z,1509700450.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:10.755Z,1509700450.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:10.806Z,1509700450.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:11.128Z,1509700451.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:11.159Z,1509700451.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:11.520Z,1509700451.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:11.543Z,1509700451.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:11.933Z,1509700451.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:11.965Z,1509700451.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:12.333Z,1509700452.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:12.364Z,1509700452.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:12.738Z,1509700452.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:12.769Z,1509700452.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:13.131Z,1509700453.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:13.167Z,1509700453.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:13.525Z,1509700453.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:13.539Z,1509700453.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:13.925Z,1509700453.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:13.986Z,1509700453.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:14.328Z,1509700454.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:14.343Z,1509700454.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:14.738Z,1509700454.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:14.798Z,1509700454.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:15.138Z,1509700455.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:15.196Z,1509700455.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:15.541Z,1509700455.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:15.591Z,1509700455.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:15.928Z,1509700455.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:15.945Z,1509700455.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:16.331Z,1509700456.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:16.390Z,1509700456.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:16.731Z,1509700456.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:16.790Z,1509700456.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:17.133Z,1509700457.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:17.148Z,1509700457.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:17.516Z,1509700457.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:17.532Z,1509700457.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:17.934Z,1509700457.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:17.957Z,1509700457.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:18.345Z,1509700458.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:18.363Z,1509700458.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:18.744Z,1509700458.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:18.759Z,1509700458.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:19.123Z,1509700459.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:19.155Z,1509700459.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:19.536Z,1509700459.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:19.561Z,1509700459.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:19.927Z,1509700459.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:19.957Z,1509700459.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:20.322Z,1509700460.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:20.354Z,1509700460.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:20.758Z,1509700460.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:20.773Z,1509700460.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:21.133Z,1509700461.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:21.163Z,1509700461.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:21.533Z,1509700461.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:21.563Z,1509700461.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:21.927Z,1509700461.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:21.951Z,1509700461.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:22.318Z,1509700462.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:22.334Z,1509700462.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:22.752Z,1509700462.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:22.767Z,1509700462.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:23.124Z,1509700463.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:23.148Z,1509700463.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:23.519Z,1509700463.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:23.539Z,1509700463.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:23.937Z,1509700463.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:23.961Z,1509700463.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:24.333Z,1509700464.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:24.364Z,1509700464.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:24.778Z,1509700464.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:24.815Z,1509700464.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:25.123Z,1509700465.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:25.139Z,1509700465.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:25.524Z,1509700465.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:25.543Z,1509700465.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:25.920Z,1509700465.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:25.936Z,1509700465.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:26.323Z,1509700466.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:26.339Z,1509700466.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:26.733Z,1509700466.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:26.764Z,1509700466.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:27.142Z,1509700467.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:27.170Z,1509700467.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:27.537Z,1509700467.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:27.587Z,1509700467.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:27.930Z,1509700467.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:27.944Z,1509700467.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:28.328Z,1509700468.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:28.343Z,1509700468.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:28.727Z,1509700468.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:28.797Z,1509700468.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:29.127Z,1509700469.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:29.142Z,1509700469.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:29.519Z,1509700469.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:29.550Z,1509700469.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:29.940Z,1509700469.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:30.001Z,1509700470.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:30.341Z,1509700470.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:30.356Z,1509700470.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:30.736Z,1509700470.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:30.791Z,1509700470.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:31.120Z,1509700471.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:31.205Z,1509700471.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:31.523Z,1509700471.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:31.549Z,1509700471.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:31.923Z,1509700471.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:31.949Z,1509700471.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:32.320Z,1509700472.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:32.353Z,1509700472.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:32.746Z,1509700472.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:32.761Z,1509700472.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:33.141Z,1509700473.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:33.157Z,1509700473.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:33.541Z,1509700473.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:33.556Z,1509700473.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:33.920Z,1509700473.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:33.947Z,1509700473.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:34.316Z,1509700474.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:34.351Z,1509700474.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:34.745Z,1509700474.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:34.760Z,1509700474.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:35.121Z,1509700475.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:35.156Z,1509700475.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:35.523Z,1509700475.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:35.548Z,1509700475.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:35.942Z,1509700475.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:35.961Z,1509700475.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:36.341Z,1509700476.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:36.362Z,1509700476.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:36.745Z,1509700476.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:36.803Z,1509700476.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:37.122Z,1509700477.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:37.154Z,1509700477.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:37.521Z,1509700477.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:37.557Z,1509700477.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:37.924Z,1509700477.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:37.960Z,1509700477.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:38.321Z,1509700478.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:38.356Z,1509700478.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:38.778Z,1509700478.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:38.828Z,1509700478.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:39.134Z,1509700479.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:39.163Z,1509700479.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:39.534Z,1509700479.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:39.558Z,1509700479.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:39.919Z,1509700479.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:39.935Z,1509700479.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:40.319Z,1509700480.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:40.335Z,1509700480.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:40.719Z,1509700480.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:40.735Z,1509700480.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:41.124Z,1509700481.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:41.159Z,1509700481.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:41.519Z,1509700481.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:41.535Z,1509700481.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:41.937Z,1509700481.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:41.967Z,1509700481.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:42.333Z,1509700482.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:42.360Z,1509700482.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:42.734Z,1509700482.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:42.757Z,1509700482.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:43.122Z,1509700483.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:43.228Z,1509700483.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:43.528Z,1509700483.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:43.550Z,1509700483.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:43.924Z,1509700483.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:43.939Z,1509700483.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:44.327Z,1509700484.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:44.342Z,1509700484.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:44.732Z,1509700484.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:44.755Z,1509700484.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:45.131Z,1509700485.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:45.151Z,1509700485.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:45.536Z,1509700485.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:45.552Z,1509700485.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:45.923Z,1509700485.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:45.955Z,1509700485.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:49.222Z,1509700489.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:49.239Z,1509700489.239 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:14:49.239Z,1509700489.239 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:14:49.239Z,1509700489.239 [BPC1](ERROR): Communications Fault
2017-11-03T09:14:49.247Z,1509700489.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:49.357Z,1509700489.357 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:14:49.406Z,1509700489.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:49.446Z,1509700489.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:49.809Z,1509700489.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:49.841Z,1509700489.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:50.209Z,1509700490.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:50.240Z,1509700490.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:50.330Z,1509700490.330 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:14:50.330Z,1509700490.330 [BPC1] No Fault, FailCount= 1
2017-11-03T09:14:50.613Z,1509700490.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:50.771Z,1509700490.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:51.000Z,1509700491.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:51.022Z,1509700491.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:51.396Z,1509700491.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:51.450Z,1509700491.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:51.799Z,1509700491.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:51.815Z,1509700491.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:52.203Z,1509700492.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:52.218Z,1509700492.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:52.602Z,1509700492.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:52.617Z,1509700492.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:53.008Z,1509700493.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:53.024Z,1509700493.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:53.412Z,1509700493.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:53.427Z,1509700493.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:53.806Z,1509700493.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:53.829Z,1509700493.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:54.200Z,1509700494.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:54.218Z,1509700494.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:54.613Z,1509700494.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:54.667Z,1509700494.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:54.991Z,1509700494.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:55.017Z,1509700495.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:55.392Z,1509700495.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:55.422Z,1509700495.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:55.813Z,1509700495.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:55.828Z,1509700495.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:56.215Z,1509700496.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:56.235Z,1509700496.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:56.612Z,1509700496.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:56.627Z,1509700496.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:57.000Z,1509700497.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:57.027Z,1509700497.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:57.387Z,1509700497.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:57.418Z,1509700497.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:57.801Z,1509700497.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:57.817Z,1509700497.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:58.202Z,1509700498.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:58.217Z,1509700498.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:58.602Z,1509700498.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:58.623Z,1509700498.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:58.820Z,1509700498.820 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:14:58.820Z,1509700498.820 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T09:14:58.820Z,1509700498.820 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:14:59.006Z,1509700499.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:59.026Z,1509700499.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:14:59.027Z,1509700499.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:59.117Z,1509700499.117 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:14:59.225Z,1509700499.225 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:14:59.318Z,1509700499.318 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:14:59.414Z,1509700499.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:59.435Z,1509700499.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:14:59.436Z,1509700499.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:14:59.813Z,1509700499.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:14:59.827Z,1509700499.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:14:59.829Z,1509700499.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:00.201Z,1509700500.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:00.217Z,1509700500.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:15:00.218Z,1509700500.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:00.592Z,1509700500.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:00.617Z,1509700500.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:15:00.618Z,1509700500.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:00.709Z,1509700500.709 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:15:00.709Z,1509700500.709 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T09:15:00.932Z,1509700500.932 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:15:00.933Z,1509700500.933 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:15:00.933Z,1509700500.933 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:15:00.933Z,1509700500.933 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:15:00.998Z,1509700500.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:01.021Z,1509700501.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:15:01.023Z,1509700501.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:01.392Z,1509700501.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:01.418Z,1509700501.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:15:01.419Z,1509700501.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:01.813Z,1509700501.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:01.828Z,1509700501.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:15:01.829Z,1509700501.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:02.213Z,1509700502.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:02.228Z,1509700502.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:15:02.229Z,1509700502.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:02.614Z,1509700502.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:02.629Z,1509700502.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:15:02.630Z,1509700502.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:02.993Z,1509700502.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:03.093Z,1509700503.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T09:15:03.095Z,1509700503.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:03.395Z,1509700503.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:03.421Z,1509700503.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:15:03.422Z,1509700503.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:03.794Z,1509700503.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:03.827Z,1509700503.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:15:03.829Z,1509700503.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:04.189Z,1509700504.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:04.234Z,1509700504.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:15:04.235Z,1509700504.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:04.591Z,1509700504.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:04.622Z,1509700504.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:15:04.623Z,1509700504.623 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:04.623Z,1509700504.623 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 180
2017-11-03T09:15:04.623Z,1509700504.623 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:15:04.625Z,1509700504.625 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:04.625Z,1509700504.625 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 180
2017-11-03T09:15:04.625Z,1509700504.625 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:15:04.627Z,1509700504.627 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:04.627Z,1509700504.627 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 180
2017-11-03T09:15:04.627Z,1509700504.627 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:15:04.713Z,1509700504.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:15:04.713Z,1509700504.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:15:04.713Z,1509700504.713 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:15:05.048Z,1509700505.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:05.134Z,1509700505.134 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:15:05.231Z,1509700505.231 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:15:05.232Z,1509700505.232 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:15:05.233Z,1509700505.233 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:15:05.233Z,1509700505.233 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:15:05.239Z,1509700505.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:15:05.239Z,1509700505.239 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 180
2017-11-03T09:15:05.239Z,1509700505.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:15:05.239Z,1509700505.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 180
2017-11-03T09:15:05.241Z,1509700505.241 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:15:05.241Z,1509700505.241 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 180
2017-11-03T09:15:05.419Z,1509700505.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:05.471Z,1509700505.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:15:05.471Z,1509700505.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:15:05.471Z,1509700505.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:15:05.472Z,1509700505.472 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:15:05.473Z,1509700505.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:15:05.473Z,1509700505.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:15:05.473Z,1509700505.473 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:15:05.474Z,1509700505.474 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:15:05.474Z,1509700505.474 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:15:05.825Z,1509700505.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:05.841Z,1509700505.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:06.214Z,1509700506.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:06.240Z,1509700506.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:06.592Z,1509700506.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:06.608Z,1509700506.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:06.993Z,1509700506.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:07.009Z,1509700507.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:07.392Z,1509700507.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:07.408Z,1509700507.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:07.806Z,1509700507.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:07.838Z,1509700507.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:08.205Z,1509700508.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:08.236Z,1509700508.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:08.606Z,1509700508.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:08.682Z,1509700508.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:09.003Z,1509700509.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:09.018Z,1509700509.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:09.401Z,1509700509.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:09.416Z,1509700509.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:09.801Z,1509700509.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:09.818Z,1509700509.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:10.202Z,1509700510.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:10.216Z,1509700510.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:10.601Z,1509700510.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:10.659Z,1509700510.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:11.013Z,1509700511.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:11.028Z,1509700511.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:11.414Z,1509700511.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:11.429Z,1509700511.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:11.813Z,1509700511.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:11.828Z,1509700511.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:12.194Z,1509700512.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:12.220Z,1509700512.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:12.592Z,1509700512.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:12.687Z,1509700512.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:12.993Z,1509700512.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:13.020Z,1509700513.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:13.392Z,1509700513.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:13.418Z,1509700513.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:13.813Z,1509700513.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:13.828Z,1509700513.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:14.213Z,1509700514.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:14.228Z,1509700514.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:14.613Z,1509700514.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:14.665Z,1509700514.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:14.992Z,1509700514.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:15.030Z,1509700515.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:15.395Z,1509700515.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:15.421Z,1509700515.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:15.793Z,1509700515.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:15.829Z,1509700515.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:16.195Z,1509700516.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:16.226Z,1509700516.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:16.592Z,1509700516.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:16.624Z,1509700516.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:17.021Z,1509700517.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:17.036Z,1509700517.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:17.418Z,1509700517.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:17.479Z,1509700517.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:17.813Z,1509700517.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:17.855Z,1509700517.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:18.194Z,1509700518.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:18.231Z,1509700518.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:18.593Z,1509700518.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:18.607Z,1509700518.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:19.003Z,1509700519.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:19.051Z,1509700519.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:19.398Z,1509700519.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:19.421Z,1509700519.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:19.828Z,1509700519.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:19.881Z,1509700519.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:20.209Z,1509700520.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:20.239Z,1509700520.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:20.606Z,1509700520.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:20.663Z,1509700520.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:20.994Z,1509700520.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:21.010Z,1509700521.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:21.397Z,1509700521.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:21.429Z,1509700521.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:21.793Z,1509700521.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:21.809Z,1509700521.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:22.193Z,1509700522.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:22.231Z,1509700522.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:22.593Z,1509700522.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:22.608Z,1509700522.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:23.006Z,1509700523.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:23.037Z,1509700523.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:23.410Z,1509700523.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:23.433Z,1509700523.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:23.802Z,1509700523.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:23.837Z,1509700523.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:24.192Z,1509700524.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:24.207Z,1509700524.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:24.595Z,1509700524.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:24.681Z,1509700524.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:24.000Z,1509700525.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:25.015Z,1509700525.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:25.399Z,1509700525.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:25.414Z,1509700525.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:25.813Z,1509700525.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:25.845Z,1509700525.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:26.205Z,1509700526.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:26.221Z,1509700526.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:26.605Z,1509700526.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:26.697Z,1509700526.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:26.000Z,1509700527.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:27.015Z,1509700527.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:27.395Z,1509700527.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:27.410Z,1509700527.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:27.799Z,1509700527.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:27.815Z,1509700527.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:28.199Z,1509700528.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:28.218Z,1509700528.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:28.602Z,1509700528.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:28.623Z,1509700528.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:29.013Z,1509700529.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:29.028Z,1509700529.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:29.414Z,1509700529.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:29.429Z,1509700529.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:29.813Z,1509700529.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:29.828Z,1509700529.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:30.192Z,1509700530.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:30.223Z,1509700530.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:30.592Z,1509700530.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:30.627Z,1509700530.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:30.994Z,1509700530.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:31.017Z,1509700531.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:31.399Z,1509700531.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:31.413Z,1509700531.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:31.805Z,1509700531.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:31.821Z,1509700531.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:32.206Z,1509700532.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:32.221Z,1509700532.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:32.605Z,1509700532.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:32.663Z,1509700532.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:33.004Z,1509700533.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:33.070Z,1509700533.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:33.396Z,1509700533.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:33.412Z,1509700533.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:33.799Z,1509700533.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:33.855Z,1509700533.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:34.201Z,1509700534.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:34.216Z,1509700534.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:34.595Z,1509700534.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:34.651Z,1509700534.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:35.008Z,1509700535.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:35.058Z,1509700535.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:35.408Z,1509700535.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:35.423Z,1509700535.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:35.808Z,1509700535.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:35.823Z,1509700535.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:36.202Z,1509700536.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:36.223Z,1509700536.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:36.603Z,1509700536.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:36.623Z,1509700536.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:37.001Z,1509700537.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:37.016Z,1509700537.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:37.398Z,1509700537.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:37.413Z,1509700537.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:37.809Z,1509700537.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:37.824Z,1509700537.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:38.209Z,1509700538.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:38.225Z,1509700538.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:38.607Z,1509700538.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:38.698Z,1509700538.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:39.000Z,1509700539.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:39.015Z,1509700539.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:39.402Z,1509700539.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:39.423Z,1509700539.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:39.799Z,1509700539.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:39.814Z,1509700539.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:40.204Z,1509700540.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:40.219Z,1509700540.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:40.601Z,1509700540.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:40.616Z,1509700540.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:41.016Z,1509700541.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:41.032Z,1509700541.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:41.414Z,1509700541.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:41.429Z,1509700541.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:41.813Z,1509700541.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:41.828Z,1509700541.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:42.192Z,1509700542.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:42.218Z,1509700542.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:42.593Z,1509700542.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:42.627Z,1509700542.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:42.995Z,1509700542.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:43.022Z,1509700543.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:43.392Z,1509700543.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:43.423Z,1509700543.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:43.814Z,1509700543.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:43.830Z,1509700543.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:44.213Z,1509700544.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:44.235Z,1509700544.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:44.612Z,1509700544.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:44.634Z,1509700544.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:44.991Z,1509700544.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:45.022Z,1509700545.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:45.395Z,1509700545.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:45.427Z,1509700545.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:45.795Z,1509700545.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:45.827Z,1509700545.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:46.197Z,1509700546.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:46.260Z,1509700546.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:49.471Z,1509700549.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:49.562Z,1509700549.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:49.707Z,1509700549.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:49.739Z,1509700549.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:50.106Z,1509700550.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:50.133Z,1509700550.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:50.502Z,1509700550.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:50.570Z,1509700550.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:50.885Z,1509700550.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:50.900Z,1509700550.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:51.299Z,1509700551.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:51.351Z,1509700551.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:51.702Z,1509700551.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:51.729Z,1509700551.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:52.102Z,1509700552.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:52.170Z,1509700552.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:52.502Z,1509700552.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:52.535Z,1509700552.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:52.888Z,1509700552.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:52.903Z,1509700552.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:53.283Z,1509700553.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:53.299Z,1509700553.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:53.697Z,1509700553.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:53.731Z,1509700553.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:54.097Z,1509700554.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:54.134Z,1509700554.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:54.500Z,1509700554.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:54.531Z,1509700554.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:54.888Z,1509700554.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:54.903Z,1509700554.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:55.287Z,1509700555.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:55.303Z,1509700555.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:55.701Z,1509700555.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:55.731Z,1509700555.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:56.101Z,1509700556.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:56.134Z,1509700556.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:56.501Z,1509700556.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:56.532Z,1509700556.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:56.899Z,1509700556.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:56.934Z,1509700556.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:57.288Z,1509700557.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:57.303Z,1509700557.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:57.701Z,1509700557.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:57.732Z,1509700557.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:58.101Z,1509700558.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:58.134Z,1509700558.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:58.501Z,1509700558.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:58.534Z,1509700558.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:58.892Z,1509700558.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:58.907Z,1509700558.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:59.287Z,1509700559.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:59.307Z,1509700559.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:15:59.726Z,1509700559.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:15:59.741Z,1509700559.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:00.096Z,1509700560.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:00.111Z,1509700560.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:00.501Z,1509700560.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:00.526Z,1509700560.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:00.908Z,1509700560.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:00.989Z,1509700560.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:01.292Z,1509700561.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:01.312Z,1509700561.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:01.728Z,1509700561.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:01.798Z,1509700561.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:02.107Z,1509700562.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:02.130Z,1509700562.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:02.502Z,1509700562.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:02.575Z,1509700562.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:02.885Z,1509700562.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:02.920Z,1509700562.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:03.309Z,1509700563.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:03.336Z,1509700563.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:03.705Z,1509700563.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:03.741Z,1509700563.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:04.108Z,1509700564.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:04.194Z,1509700564.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:04.500Z,1509700564.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:04.543Z,1509700564.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:04.890Z,1509700564.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:04.947Z,1509700564.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:05.306Z,1509700565.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:05.350Z,1509700565.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:05.722Z,1509700565.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:05.795Z,1509700565.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:06.108Z,1509700566.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:06.201Z,1509700566.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:06.524Z,1509700566.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:06.555Z,1509700566.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:06.905Z,1509700566.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:06.949Z,1509700566.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:07.305Z,1509700567.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:07.358Z,1509700567.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:07.703Z,1509700567.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:07.739Z,1509700567.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:08.131Z,1509700568.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:08.186Z,1509700568.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:08.504Z,1509700568.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:08.547Z,1509700568.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:08.894Z,1509700568.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:08.936Z,1509700568.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:09.294Z,1509700569.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:09.335Z,1509700569.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:09.705Z,1509700569.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:09.741Z,1509700569.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:10.108Z,1509700570.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:10.158Z,1509700570.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:10.504Z,1509700570.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:10.547Z,1509700570.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:10.894Z,1509700570.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:10.934Z,1509700570.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:11.293Z,1509700571.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:11.336Z,1509700571.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:11.703Z,1509700571.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:11.744Z,1509700571.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:12.099Z,1509700572.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:12.124Z,1509700572.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:12.497Z,1509700572.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:12.519Z,1509700572.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:12.894Z,1509700572.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:12.918Z,1509700572.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:13.292Z,1509700573.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:13.316Z,1509700573.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:13.702Z,1509700573.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:13.730Z,1509700573.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:14.106Z,1509700574.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:14.131Z,1509700574.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:14.502Z,1509700574.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:14.528Z,1509700574.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:14.902Z,1509700574.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:14.977Z,1509700574.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:15.293Z,1509700575.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:15.341Z,1509700575.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:15.708Z,1509700575.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:15.760Z,1509700575.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:16.107Z,1509700576.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:16.176Z,1509700576.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:16.502Z,1509700576.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:16.533Z,1509700576.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:16.884Z,1509700576.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:16.907Z,1509700576.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:17.294Z,1509700577.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:17.309Z,1509700577.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:17.702Z,1509700577.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:17.734Z,1509700577.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:18.102Z,1509700578.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:18.199Z,1509700578.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:18.497Z,1509700578.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:18.533Z,1509700578.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:18.889Z,1509700578.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:18.939Z,1509700578.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:19.303Z,1509700579.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:19.333Z,1509700579.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:19.701Z,1509700579.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:19.751Z,1509700579.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:20.101Z,1509700580.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:20.151Z,1509700580.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:20.502Z,1509700580.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:20.527Z,1509700580.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:20.887Z,1509700580.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:20.902Z,1509700580.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:21.313Z,1509700581.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:21.409Z,1509700581.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:21.698Z,1509700581.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:21.713Z,1509700581.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:22.098Z,1509700582.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:22.113Z,1509700582.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:22.498Z,1509700582.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:22.513Z,1509700582.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:22.885Z,1509700582.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:22.901Z,1509700582.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:23.287Z,1509700583.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:23.307Z,1509700583.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:23.698Z,1509700583.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:23.713Z,1509700583.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:24.094Z,1509700584.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:24.109Z,1509700584.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:24.498Z,1509700584.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:24.513Z,1509700584.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:24.885Z,1509700584.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:24.900Z,1509700584.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:25.287Z,1509700585.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:25.307Z,1509700585.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:25.698Z,1509700585.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:25.713Z,1509700585.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:26.098Z,1509700586.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:26.113Z,1509700586.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:26.498Z,1509700586.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:26.513Z,1509700586.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:26.885Z,1509700586.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:26.900Z,1509700586.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:27.286Z,1509700587.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:27.301Z,1509700587.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:27.698Z,1509700587.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:27.714Z,1509700587.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:28.099Z,1509700588.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:28.114Z,1509700588.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:28.499Z,1509700588.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:28.519Z,1509700588.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:28.892Z,1509700588.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:28.921Z,1509700588.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:29.285Z,1509700589.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:29.324Z,1509700589.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:29.697Z,1509700589.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:29.714Z,1509700589.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:30.102Z,1509700590.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:30.123Z,1509700590.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:30.498Z,1509700590.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:30.520Z,1509700590.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:30.885Z,1509700590.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:30.900Z,1509700590.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:31.283Z,1509700591.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:31.303Z,1509700591.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:31.698Z,1509700591.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:31.714Z,1509700591.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:32.095Z,1509700592.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:32.155Z,1509700592.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:32.494Z,1509700592.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:32.515Z,1509700592.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:32.885Z,1509700592.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:32.970Z,1509700592.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:33.283Z,1509700593.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:33.322Z,1509700593.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:33.694Z,1509700593.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:33.755Z,1509700593.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:34.098Z,1509700594.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:34.119Z,1509700594.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:34.506Z,1509700594.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:34.557Z,1509700594.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:34.906Z,1509700594.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:34.922Z,1509700594.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:35.300Z,1509700595.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:35.317Z,1509700595.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:35.700Z,1509700595.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:35.726Z,1509700595.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:36.103Z,1509700596.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:36.147Z,1509700596.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:36.503Z,1509700596.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:36.523Z,1509700596.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:36.896Z,1509700596.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:36.918Z,1509700596.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:37.279Z,1509700597.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:37.304Z,1509700597.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:37.704Z,1509700597.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:37.719Z,1509700597.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:38.104Z,1509700598.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:38.123Z,1509700598.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:38.504Z,1509700598.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:38.520Z,1509700598.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:38.902Z,1509700598.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:38.918Z,1509700598.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:39.292Z,1509700599.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:39.307Z,1509700599.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:39.700Z,1509700599.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:39.715Z,1509700599.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:40.104Z,1509700600.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:40.120Z,1509700600.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:40.504Z,1509700600.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:40.519Z,1509700600.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:40.889Z,1509700600.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:40.909Z,1509700600.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:41.291Z,1509700601.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:41.307Z,1509700601.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:41.704Z,1509700601.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:41.720Z,1509700601.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:42.103Z,1509700602.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:42.123Z,1509700602.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:42.504Z,1509700602.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:42.520Z,1509700602.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:42.915Z,1509700602.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:42.996Z,1509700602.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:43.294Z,1509700603.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:43.315Z,1509700603.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:43.705Z,1509700603.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:43.721Z,1509700603.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:44.108Z,1509700604.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:44.130Z,1509700604.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:44.505Z,1509700604.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:44.521Z,1509700604.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:44.896Z,1509700604.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:44.911Z,1509700604.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:45.283Z,1509700605.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:45.315Z,1509700605.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:45.705Z,1509700605.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:45.723Z,1509700605.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:45.727Z,1509700605.727 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T09:11:45.4Z
2017-11-03T09:16:45.727Z,1509700605.727 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T09:16:45.727Z,1509700605.727 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T09:16:46.108Z,1509700606.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:46.186Z,1509700606.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:46.617Z,1509700606.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:46.638Z,1509700606.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:49.846Z,1509700609.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:49.914Z,1509700609.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:50.018Z,1509700610.018 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171103T001125/Courier0212.lzma
2017-11-03T09:16:50.058Z,1509700610.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:50.077Z,1509700610.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:50.457Z,1509700610.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:50.514Z,1509700610.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:50.815Z,1509700610.815 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0212.lzma.bak
2017-11-03T09:16:50.815Z,1509700610.815 [DataOverHttps](INFO): SBD MOMSN=5183210
2017-11-03T09:16:50.861Z,1509700610.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:50.915Z,1509700610.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:51.466Z,1509700611.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:51.481Z,1509700611.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:51.651Z,1509700611.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:51.671Z,1509700611.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:55.004Z,1509700615.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:55.019Z,1509700615.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:55.139Z,1509700615.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:55.183Z,1509700615.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:55.561Z,1509700615.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:55.583Z,1509700615.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:55.965Z,1509700615.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:55.988Z,1509700615.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:56.357Z,1509700616.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:56.379Z,1509700616.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:16:56.750Z,1509700616.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:16:56.769Z,1509700616.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:00.006Z,1509700620.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:00.026Z,1509700620.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:00.118Z,1509700620.118 [DataOverHttps](INFO): Sending 214 bytes from file Logs/20171103T001125/Express0213.lzma
2017-11-03T09:17:00.139Z,1509700620.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:00.191Z,1509700620.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:00.557Z,1509700620.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:00.573Z,1509700620.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:00.920Z,1509700620.920 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0213.lzma.bak
2017-11-03T09:17:00.920Z,1509700620.920 [DataOverHttps](INFO): SBD MOMSN=5183214
2017-11-03T09:17:00.970Z,1509700620.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:00.985Z,1509700620.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:01.251Z,1509700621.251 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:17:01.251Z,1509700621.251 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T09:17:01.251Z,1509700621.251 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:17:01.582Z,1509700621.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:01.616Z,1509700621.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.6 s old, using for 20.0 s.
2017-11-03T09:17:01.617Z,1509700621.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:01.621Z,1509700621.621 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T09:17:01.621Z,1509700621.621 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T09:17:01.621Z,1509700621.621 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T09:17:01.653Z,1509700621.653 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:17:01.714Z,1509700621.714 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:17:01.765Z,1509700621.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:01.814Z,1509700621.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:17:01.815Z,1509700621.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:01.891Z,1509700621.891 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:17:04.847Z,1509700624.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:04.923Z,1509700624.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T09:17:04.928Z,1509700624.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:05.017Z,1509700625.017 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:17:05.017Z,1509700625.017 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T09:17:05.066Z,1509700625.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:05.099Z,1509700625.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-03T09:17:05.100Z,1509700625.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:05.120Z,1509700625.120 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:17:05.121Z,1509700625.121 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:17:05.121Z,1509700625.121 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:17:05.121Z,1509700625.121 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:17:05.469Z,1509700625.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:05.499Z,1509700625.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T09:17:05.501Z,1509700625.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:05.873Z,1509700625.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:05.922Z,1509700625.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T09:17:05.923Z,1509700625.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:06.270Z,1509700626.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:06.301Z,1509700626.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T09:17:06.302Z,1509700626.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:06.655Z,1509700626.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:06.710Z,1509700626.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T09:17:06.711Z,1509700626.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:07.059Z,1509700627.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:07.102Z,1509700627.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-03T09:17:07.103Z,1509700627.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:07.455Z,1509700627.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:07.470Z,1509700627.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T09:17:07.471Z,1509700627.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:07.869Z,1509700627.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:07.926Z,1509700627.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T09:17:07.928Z,1509700627.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:08.265Z,1509700628.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:08.279Z,1509700628.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T09:17:08.304Z,1509700628.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:08.670Z,1509700628.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:08.700Z,1509700628.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-03T09:17:08.701Z,1509700628.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:09.055Z,1509700629.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:09.070Z,1509700629.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-03T09:17:09.071Z,1509700629.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:09.260Z,1509700629.260 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:17:09.320Z,1509700629.320 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:17:09.321Z,1509700629.321 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:17:09.322Z,1509700629.322 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:17:09.322Z,1509700629.322 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:17:09.466Z,1509700629.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:09.498Z,1509700629.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T09:17:09.499Z,1509700629.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:09.861Z,1509700629.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:09.877Z,1509700629.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:10.257Z,1509700630.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:10.279Z,1509700630.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:10.673Z,1509700630.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:10.699Z,1509700630.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:11.073Z,1509700631.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:11.098Z,1509700631.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:11.474Z,1509700631.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:11.499Z,1509700631.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:11.857Z,1509700631.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:11.872Z,1509700631.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:12.256Z,1509700632.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:12.271Z,1509700632.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:12.693Z,1509700632.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:12.725Z,1509700632.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:13.069Z,1509700633.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:13.101Z,1509700633.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:13.470Z,1509700633.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:13.501Z,1509700633.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:13.856Z,1509700633.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:13.872Z,1509700633.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:14.255Z,1509700634.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:14.270Z,1509700634.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:14.702Z,1509700634.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:14.723Z,1509700634.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:15.070Z,1509700635.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:15.101Z,1509700635.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:15.470Z,1509700635.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:15.493Z,1509700635.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:15.867Z,1509700635.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:15.891Z,1509700635.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:16.255Z,1509700636.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:16.286Z,1509700636.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:16.713Z,1509700636.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:16.729Z,1509700636.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:17.073Z,1509700637.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:17.106Z,1509700637.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:17.466Z,1509700637.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:17.481Z,1509700637.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:17.860Z,1509700637.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:17.876Z,1509700637.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:18.259Z,1509700638.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:18.279Z,1509700638.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:18.722Z,1509700638.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:18.749Z,1509700638.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:19.065Z,1509700639.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:19.130Z,1509700639.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:19.467Z,1509700639.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:19.530Z,1509700639.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:19.860Z,1509700639.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:19.876Z,1509700639.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:20.263Z,1509700640.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:20.311Z,1509700640.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:20.669Z,1509700640.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:20.739Z,1509700640.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:21.069Z,1509700641.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:21.119Z,1509700641.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:21.469Z,1509700641.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:21.520Z,1509700641.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:21.857Z,1509700641.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:21.881Z,1509700641.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:22.259Z,1509700642.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:22.274Z,1509700642.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:22.670Z,1509700642.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:22.685Z,1509700642.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:23.073Z,1509700643.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:23.089Z,1509700643.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:23.469Z,1509700643.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:23.485Z,1509700643.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:23.863Z,1509700643.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:23.878Z,1509700643.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:24.263Z,1509700644.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:24.279Z,1509700644.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:24.668Z,1509700644.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:24.684Z,1509700644.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:25.069Z,1509700645.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:25.085Z,1509700645.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:25.469Z,1509700645.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:25.484Z,1509700645.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:25.861Z,1509700645.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:25.877Z,1509700645.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:26.253Z,1509700646.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:26.282Z,1509700646.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:26.667Z,1509700646.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:26.684Z,1509700646.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:27.067Z,1509700647.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:27.084Z,1509700647.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:27.467Z,1509700647.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:27.488Z,1509700647.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:27.863Z,1509700647.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:27.878Z,1509700647.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:28.262Z,1509700648.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:28.283Z,1509700648.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:28.723Z,1509700648.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:28.741Z,1509700648.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:29.070Z,1509700649.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:29.085Z,1509700649.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:29.468Z,1509700649.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:29.483Z,1509700649.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:29.860Z,1509700649.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:29.876Z,1509700649.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:30.262Z,1509700650.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:30.283Z,1509700650.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:30.694Z,1509700650.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:30.740Z,1509700650.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:31.068Z,1509700651.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:31.083Z,1509700651.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:31.467Z,1509700651.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:31.487Z,1509700651.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:31.860Z,1509700651.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:31.875Z,1509700651.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:32.263Z,1509700652.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:32.282Z,1509700652.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:32.732Z,1509700652.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:32.764Z,1509700652.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:33.072Z,1509700653.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:33.087Z,1509700653.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:33.473Z,1509700653.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:33.555Z,1509700653.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:33.855Z,1509700653.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:33.881Z,1509700653.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:34.252Z,1509700654.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:34.286Z,1509700654.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:34.679Z,1509700654.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:34.781Z,1509700654.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:35.069Z,1509700655.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:35.084Z,1509700655.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:35.469Z,1509700655.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:35.523Z,1509700655.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:35.853Z,1509700655.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:35.908Z,1509700655.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:36.255Z,1509700656.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:36.280Z,1509700656.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:36.671Z,1509700656.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:36.691Z,1509700656.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:37.085Z,1509700657.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:37.101Z,1509700657.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:37.473Z,1509700657.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:37.489Z,1509700657.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:37.855Z,1509700657.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:37.881Z,1509700657.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:38.252Z,1509700658.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:38.283Z,1509700658.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:38.657Z,1509700658.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:38.687Z,1509700658.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:39.073Z,1509700659.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:39.088Z,1509700659.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:39.470Z,1509700659.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:39.485Z,1509700659.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:39.854Z,1509700659.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:39.879Z,1509700659.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:40.251Z,1509700660.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:40.283Z,1509700660.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:40.661Z,1509700660.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:40.691Z,1509700660.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:41.077Z,1509700661.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:41.092Z,1509700661.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:41.462Z,1509700661.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:41.488Z,1509700661.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:41.854Z,1509700661.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:41.885Z,1509700661.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:42.255Z,1509700662.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:42.290Z,1509700662.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:42.696Z,1509700662.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:42.745Z,1509700662.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:43.066Z,1509700663.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:43.092Z,1509700663.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:43.466Z,1509700663.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:43.492Z,1509700663.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:43.853Z,1509700663.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:43.889Z,1509700663.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:44.252Z,1509700664.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:44.267Z,1509700664.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:44.691Z,1509700664.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:44.739Z,1509700664.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:45.069Z,1509700665.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:45.100Z,1509700665.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:45.465Z,1509700665.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:45.493Z,1509700665.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:45.855Z,1509700665.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:45.871Z,1509700665.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:46.251Z,1509700666.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:46.267Z,1509700666.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:46.731Z,1509700666.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:46.757Z,1509700666.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:47.065Z,1509700667.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:47.091Z,1509700667.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:47.465Z,1509700667.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:47.489Z,1509700667.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:47.851Z,1509700667.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:47.947Z,1509700667.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:48.251Z,1509700668.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:48.271Z,1509700668.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:48.665Z,1509700668.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:48.754Z,1509700668.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:49.069Z,1509700669.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:49.101Z,1509700669.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:49.465Z,1509700669.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:49.519Z,1509700669.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:49.859Z,1509700669.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:49.910Z,1509700669.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:50.254Z,1509700670.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:50.269Z,1509700670.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:50.670Z,1509700670.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:50.700Z,1509700670.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:51.087Z,1509700671.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:51.103Z,1509700671.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:51.470Z,1509700671.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:51.501Z,1509700671.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:51.852Z,1509700671.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:51.867Z,1509700671.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:52.255Z,1509700672.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:52.271Z,1509700672.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:52.669Z,1509700672.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:52.701Z,1509700672.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:53.065Z,1509700673.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:53.100Z,1509700673.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:53.473Z,1509700673.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:53.498Z,1509700673.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:53.856Z,1509700673.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:53.871Z,1509700673.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:54.259Z,1509700674.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:54.279Z,1509700674.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:54.669Z,1509700674.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:54.701Z,1509700674.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:55.065Z,1509700675.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:55.080Z,1509700675.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:55.469Z,1509700675.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:55.501Z,1509700675.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:55.856Z,1509700675.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:55.901Z,1509700675.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:56.252Z,1509700676.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:56.266Z,1509700676.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:56.711Z,1509700676.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:56.747Z,1509700676.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:57.069Z,1509700677.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:57.101Z,1509700677.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:57.469Z,1509700677.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:57.501Z,1509700677.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:57.862Z,1509700677.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:57.877Z,1509700677.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:58.260Z,1509700678.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:58.275Z,1509700678.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:58.716Z,1509700678.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:58.752Z,1509700678.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:59.073Z,1509700679.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:59.104Z,1509700679.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:59.465Z,1509700679.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:59.481Z,1509700679.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:17:59.861Z,1509700679.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:17:59.883Z,1509700679.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:00.261Z,1509700680.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:00.276Z,1509700680.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:00.712Z,1509700680.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:00.761Z,1509700680.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:01.066Z,1509700681.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:01.082Z,1509700681.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:01.471Z,1509700681.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:01.486Z,1509700681.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:01.861Z,1509700681.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:01.946Z,1509700681.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:02.265Z,1509700682.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:02.281Z,1509700682.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:05.546Z,1509700685.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:05.599Z,1509700685.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:05.599Z,1509700685.599 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 181
2017-11-03T09:18:05.599Z,1509700685.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:18:05.617Z,1509700685.617 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:05.617Z,1509700685.617 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 181
2017-11-03T09:18:05.617Z,1509700685.617 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:18:05.619Z,1509700685.619 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:05.619Z,1509700685.619 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 181
2017-11-03T09:18:05.619Z,1509700685.619 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:18:05.714Z,1509700685.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:18:05.714Z,1509700685.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:18:05.714Z,1509700685.714 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:18:05.787Z,1509700685.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:05.885Z,1509700685.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:18:05.885Z,1509700685.885 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 181
2017-11-03T09:18:05.886Z,1509700685.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:18:05.886Z,1509700685.886 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 181
2017-11-03T09:18:05.886Z,1509700685.886 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:18:05.886Z,1509700685.886 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 181
2017-11-03T09:18:06.175Z,1509700686.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:06.233Z,1509700686.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:18:06.233Z,1509700686.233 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:18:06.234Z,1509700686.234 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:18:06.234Z,1509700686.234 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:18:06.234Z,1509700686.234 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:18:06.235Z,1509700686.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:18:06.235Z,1509700686.235 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:18:06.235Z,1509700686.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:18:06.236Z,1509700686.236 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:18:06.551Z,1509700686.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:06.599Z,1509700686.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:06.956Z,1509700686.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:06.988Z,1509700686.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:07.363Z,1509700687.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:07.395Z,1509700687.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:07.774Z,1509700687.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:07.789Z,1509700687.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:08.174Z,1509700688.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:08.189Z,1509700688.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:08.574Z,1509700688.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:08.593Z,1509700688.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:08.955Z,1509700688.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:08.986Z,1509700688.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:09.363Z,1509700689.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:09.389Z,1509700689.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:09.752Z,1509700689.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:09.787Z,1509700689.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:10.155Z,1509700690.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:10.191Z,1509700690.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:10.552Z,1509700690.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:10.567Z,1509700690.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:10.960Z,1509700690.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:10.975Z,1509700690.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:11.373Z,1509700691.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:11.408Z,1509700691.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:11.765Z,1509700691.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:11.781Z,1509700691.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:12.170Z,1509700692.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:12.185Z,1509700692.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:12.560Z,1509700692.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:12.579Z,1509700692.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:12.963Z,1509700692.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:12.989Z,1509700692.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:13.352Z,1509700693.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:13.383Z,1509700693.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:13.766Z,1509700693.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:13.799Z,1509700693.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:14.165Z,1509700694.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:14.192Z,1509700694.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:14.565Z,1509700694.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:14.598Z,1509700694.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:14.959Z,1509700694.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:14.979Z,1509700694.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:15.359Z,1509700695.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:15.375Z,1509700695.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:15.760Z,1509700695.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:15.779Z,1509700695.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:16.160Z,1509700696.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:16.176Z,1509700696.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:16.559Z,1509700696.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:16.575Z,1509700696.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:16.962Z,1509700696.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:16.977Z,1509700696.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:17.373Z,1509700697.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:17.405Z,1509700697.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:17.765Z,1509700697.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:17.781Z,1509700697.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:18.160Z,1509700698.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:18.178Z,1509700698.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:18.560Z,1509700698.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:18.660Z,1509700698.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:18.989Z,1509700698.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:19.013Z,1509700699.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:19.362Z,1509700699.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:19.422Z,1509700699.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:19.772Z,1509700699.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:19.795Z,1509700699.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:20.173Z,1509700700.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:20.219Z,1509700700.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:20.572Z,1509700700.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:20.619Z,1509700700.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:20.964Z,1509700700.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:20.979Z,1509700700.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:21.370Z,1509700701.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:21.385Z,1509700701.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:21.760Z,1509700701.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:21.776Z,1509700701.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:22.163Z,1509700702.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:22.178Z,1509700702.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:22.560Z,1509700702.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:22.575Z,1509700702.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:22.961Z,1509700702.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:22.976Z,1509700702.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:23.383Z,1509700703.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:23.399Z,1509700703.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:23.769Z,1509700703.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:23.794Z,1509700703.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:24.152Z,1509700704.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:24.175Z,1509700704.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:24.554Z,1509700704.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:24.569Z,1509700704.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:24.951Z,1509700704.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:24.982Z,1509700704.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:25.352Z,1509700705.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:25.378Z,1509700705.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:25.773Z,1509700705.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:25.789Z,1509700705.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:26.173Z,1509700706.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:26.188Z,1509700706.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:26.570Z,1509700706.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:26.590Z,1509700706.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:26.950Z,1509700706.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:26.991Z,1509700706.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:27.352Z,1509700707.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:27.367Z,1509700707.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:27.752Z,1509700707.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:27.790Z,1509700707.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:28.150Z,1509700708.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:28.165Z,1509700708.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:28.553Z,1509700708.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:28.585Z,1509700708.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:28.962Z,1509700708.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:28.989Z,1509700708.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:29.365Z,1509700709.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:29.393Z,1509700709.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:29.769Z,1509700709.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:29.799Z,1509700709.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:30.153Z,1509700710.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:30.167Z,1509700710.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:30.554Z,1509700710.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:30.569Z,1509700710.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:30.958Z,1509700710.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:30.973Z,1509700710.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:31.355Z,1509700711.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:31.371Z,1509700711.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:31.767Z,1509700711.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:31.797Z,1509700711.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:32.171Z,1509700712.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:32.193Z,1509700712.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:32.566Z,1509700712.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:32.666Z,1509700712.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:32.994Z,1509700712.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:33.009Z,1509700713.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:33.355Z,1509700713.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:33.375Z,1509700713.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:33.756Z,1509700713.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:33.847Z,1509700713.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:34.160Z,1509700714.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:34.175Z,1509700714.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:34.556Z,1509700714.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:34.610Z,1509700714.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:34.969Z,1509700714.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:35.018Z,1509700715.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:35.365Z,1509700715.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:35.401Z,1509700715.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:35.769Z,1509700715.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:35.801Z,1509700715.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:36.156Z,1509700716.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:36.171Z,1509700716.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:36.559Z,1509700716.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:36.579Z,1509700716.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:36.956Z,1509700716.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:36.979Z,1509700716.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:37.367Z,1509700717.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:37.400Z,1509700717.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:37.769Z,1509700717.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:37.799Z,1509700717.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:38.169Z,1509700718.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:38.200Z,1509700718.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:38.569Z,1509700718.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:38.598Z,1509700718.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:38.947Z,1509700718.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:38.978Z,1509700718.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:39.350Z,1509700719.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:39.382Z,1509700719.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:39.763Z,1509700719.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:39.783Z,1509700719.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:40.157Z,1509700720.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:40.172Z,1509700720.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:40.556Z,1509700720.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:40.571Z,1509700720.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:40.966Z,1509700720.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:40.993Z,1509700720.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:41.377Z,1509700721.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:41.392Z,1509700721.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:41.772Z,1509700721.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:41.787Z,1509700721.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:42.155Z,1509700722.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:42.181Z,1509700722.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:42.555Z,1509700722.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:42.581Z,1509700722.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:42.964Z,1509700722.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:42.995Z,1509700722.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:43.357Z,1509700723.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:43.373Z,1509700723.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:43.766Z,1509700723.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:43.797Z,1509700723.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:44.173Z,1509700724.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:44.197Z,1509700724.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:44.570Z,1509700724.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:44.599Z,1509700724.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:44.958Z,1509700724.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:44.973Z,1509700724.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:45.356Z,1509700725.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:45.372Z,1509700725.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:45.759Z,1509700725.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:45.775Z,1509700725.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:46.156Z,1509700726.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:46.173Z,1509700726.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:46.556Z,1509700726.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:46.622Z,1509700726.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:46.994Z,1509700726.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:47.068Z,1509700727.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:47.374Z,1509700727.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:47.403Z,1509700727.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:47.766Z,1509700727.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:47.781Z,1509700727.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:48.160Z,1509700728.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:48.207Z,1509700728.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:48.560Z,1509700728.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:48.579Z,1509700728.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:48.960Z,1509700728.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:49.010Z,1509700729.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:49.366Z,1509700729.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:49.422Z,1509700729.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:49.765Z,1509700729.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:49.781Z,1509700729.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:50.165Z,1509700730.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:50.180Z,1509700730.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:50.565Z,1509700730.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:50.581Z,1509700730.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:50.960Z,1509700730.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:50.979Z,1509700730.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:51.358Z,1509700731.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:51.373Z,1509700731.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:51.758Z,1509700731.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:51.785Z,1509700731.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:52.162Z,1509700732.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:52.183Z,1509700732.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:52.560Z,1509700732.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:52.575Z,1509700732.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:52.974Z,1509700732.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:52.989Z,1509700732.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:53.369Z,1509700733.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:53.384Z,1509700733.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:53.772Z,1509700733.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:53.788Z,1509700733.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:54.163Z,1509700734.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:54.183Z,1509700734.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:54.562Z,1509700734.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:54.583Z,1509700734.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:54.951Z,1509700734.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:54.991Z,1509700734.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:55.352Z,1509700735.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:55.390Z,1509700735.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:55.765Z,1509700735.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:55.799Z,1509700735.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:56.165Z,1509700736.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:56.195Z,1509700736.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:56.566Z,1509700736.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:56.592Z,1509700736.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:56.959Z,1509700736.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:56.990Z,1509700736.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:57.356Z,1509700737.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:57.371Z,1509700737.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:57.756Z,1509700737.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:57.771Z,1509700737.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:58.160Z,1509700738.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:58.176Z,1509700738.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:58.556Z,1509700738.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:58.571Z,1509700738.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:58.974Z,1509700738.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:58.996Z,1509700738.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:59.369Z,1509700739.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:59.399Z,1509700739.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:18:59.769Z,1509700739.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:18:59.805Z,1509700739.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:00.156Z,1509700740.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:00.171Z,1509700740.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:00.556Z,1509700740.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:00.571Z,1509700740.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:00.959Z,1509700740.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:01.027Z,1509700741.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:01.361Z,1509700741.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:01.376Z,1509700741.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:01.770Z,1509700741.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:01.971Z,1509700741.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:02.172Z,1509700742.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:02.195Z,1509700742.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:02.573Z,1509700742.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:02.588Z,1509700742.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:05.246Z,1509700745.246 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:19:05.246Z,1509700745.246 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T09:19:05.246Z,1509700745.246 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:19:05.648Z,1509700745.648 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:19:05.765Z,1509700745.765 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:19:05.926Z,1509700745.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:05.977Z,1509700745.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T09:19:05.978Z,1509700745.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:06.061Z,1509700746.061 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:19:06.061Z,1509700746.061 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T09:19:06.117Z,1509700746.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:06.140Z,1509700746.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:19:06.141Z,1509700746.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:06.518Z,1509700746.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:06.570Z,1509700746.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:19:06.571Z,1509700746.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:06.920Z,1509700746.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:06.974Z,1509700746.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:19:06.976Z,1509700746.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:07.317Z,1509700747.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:07.332Z,1509700747.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-03T09:19:07.334Z,1509700747.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:07.708Z,1509700747.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:07.723Z,1509700747.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-03T09:19:07.724Z,1509700747.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:08.107Z,1509700748.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:08.122Z,1509700748.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T09:19:08.123Z,1509700748.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:08.505Z,1509700748.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:08.522Z,1509700748.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-03T09:19:08.523Z,1509700748.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:08.918Z,1509700748.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:08.932Z,1509700748.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-03T09:19:08.933Z,1509700748.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:09.320Z,1509700749.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:09.342Z,1509700749.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:19:09.343Z,1509700749.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:09.717Z,1509700749.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:09.732Z,1509700749.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T09:19:09.733Z,1509700749.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:10.096Z,1509700750.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:10.122Z,1509700750.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-03T09:19:10.123Z,1509700750.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:10.507Z,1509700750.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:10.523Z,1509700750.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-03T09:19:10.524Z,1509700750.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:10.905Z,1509700750.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:10.921Z,1509700750.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-03T09:19:10.922Z,1509700750.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:11.307Z,1509700751.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:11.321Z,1509700751.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-03T09:19:11.323Z,1509700751.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:11.718Z,1509700751.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:11.733Z,1509700751.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-03T09:19:11.734Z,1509700751.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:12.117Z,1509700752.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:12.131Z,1509700752.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-03T09:19:12.133Z,1509700752.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:12.517Z,1509700752.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:12.532Z,1509700752.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-03T09:19:12.533Z,1509700752.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:12.906Z,1509700752.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:12.923Z,1509700752.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-03T09:19:12.924Z,1509700752.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:13.294Z,1509700753.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:13.320Z,1509700753.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-03T09:19:13.321Z,1509700753.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:13.696Z,1509700753.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:13.721Z,1509700753.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T09:19:13.722Z,1509700753.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:14.107Z,1509700754.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:14.123Z,1509700754.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T09:19:14.124Z,1509700754.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:14.506Z,1509700754.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:14.525Z,1509700754.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-03T09:19:14.526Z,1509700754.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:14.918Z,1509700754.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:14.932Z,1509700754.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-03T09:19:14.933Z,1509700754.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:15.320Z,1509700755.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:15.335Z,1509700755.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-03T09:19:15.336Z,1509700755.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:15.717Z,1509700755.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:15.732Z,1509700755.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-03T09:19:15.733Z,1509700755.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:16.108Z,1509700756.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:16.130Z,1509700756.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-03T09:19:16.131Z,1509700756.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:16.506Z,1509700756.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:16.521Z,1509700756.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-03T09:19:16.522Z,1509700756.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:16.906Z,1509700756.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:16.921Z,1509700756.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-03T09:19:16.922Z,1509700756.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:17.293Z,1509700757.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:17.319Z,1509700757.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-03T09:19:17.320Z,1509700757.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:17.706Z,1509700757.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:17.729Z,1509700757.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T09:19:17.730Z,1509700757.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:18.121Z,1509700758.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:18.136Z,1509700758.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T09:19:18.137Z,1509700758.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:18.519Z,1509700758.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:18.533Z,1509700758.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-03T09:19:18.534Z,1509700758.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:18.899Z,1509700758.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:18.950Z,1509700758.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:19:18.951Z,1509700758.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:19.296Z,1509700759.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:19.354Z,1509700759.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:19:19.355Z,1509700759.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:19.696Z,1509700759.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:19.728Z,1509700759.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-03T09:19:19.729Z,1509700759.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:20.099Z,1509700760.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:20.170Z,1509700760.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:19:20.172Z,1509700760.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:20.496Z,1509700760.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:20.532Z,1509700760.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T09:19:20.533Z,1509700760.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:20.919Z,1509700760.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:20.972Z,1509700760.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:19:20.973Z,1509700760.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:21.321Z,1509700761.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:21.374Z,1509700761.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:19:21.375Z,1509700761.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:21.718Z,1509700761.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:21.732Z,1509700761.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T09:19:21.734Z,1509700761.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:22.097Z,1509700762.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:22.131Z,1509700762.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-03T09:19:22.133Z,1509700762.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:22.499Z,1509700762.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:22.530Z,1509700762.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-03T09:19:22.531Z,1509700762.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:22.899Z,1509700762.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:22.930Z,1509700762.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:23.296Z,1509700763.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:23.330Z,1509700763.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:23.718Z,1509700763.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:23.733Z,1509700763.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:24.118Z,1509700764.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:24.133Z,1509700764.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:24.519Z,1509700764.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:24.534Z,1509700764.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:24.899Z,1509700764.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:24.930Z,1509700764.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:25.296Z,1509700765.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:25.327Z,1509700765.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:25.699Z,1509700765.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:25.735Z,1509700765.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:26.099Z,1509700766.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:26.134Z,1509700766.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:26.492Z,1509700766.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:26.507Z,1509700766.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:26.909Z,1509700766.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:26.935Z,1509700766.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:27.309Z,1509700767.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:27.336Z,1509700767.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:27.710Z,1509700767.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:27.732Z,1509700767.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:28.096Z,1509700768.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:28.111Z,1509700768.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:28.495Z,1509700768.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:28.511Z,1509700768.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:28.899Z,1509700768.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:28.915Z,1509700768.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:29.296Z,1509700769.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:29.370Z,1509700769.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:29.713Z,1509700769.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:29.742Z,1509700769.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:30.113Z,1509700770.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:30.144Z,1509700770.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:30.514Z,1509700770.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:30.545Z,1509700770.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:30.900Z,1509700770.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:30.915Z,1509700770.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:31.299Z,1509700771.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:31.314Z,1509700771.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:31.704Z,1509700771.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:31.723Z,1509700771.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:32.102Z,1509700772.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:32.118Z,1509700772.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:32.503Z,1509700772.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:32.519Z,1509700772.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:32.919Z,1509700772.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:33.004Z,1509700773.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:33.313Z,1509700773.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:33.371Z,1509700773.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:33.713Z,1509700773.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:33.771Z,1509700773.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:34.099Z,1509700774.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:34.119Z,1509700774.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:34.499Z,1509700774.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:34.515Z,1509700774.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:34.900Z,1509700774.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:34.954Z,1509700774.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:35.300Z,1509700775.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:35.315Z,1509700775.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:35.713Z,1509700775.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:35.767Z,1509700775.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:36.113Z,1509700776.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:36.147Z,1509700776.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:36.513Z,1509700776.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:36.567Z,1509700776.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:36.900Z,1509700776.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:36.915Z,1509700776.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:37.301Z,1509700777.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:37.316Z,1509700777.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:37.704Z,1509700777.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:37.720Z,1509700777.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:38.101Z,1509700778.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:38.116Z,1509700778.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:38.501Z,1509700778.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:38.515Z,1509700778.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:38.913Z,1509700778.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:38.949Z,1509700778.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:39.314Z,1509700779.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:39.348Z,1509700779.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:39.714Z,1509700779.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:39.749Z,1509700779.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:40.101Z,1509700780.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:40.116Z,1509700780.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:40.501Z,1509700780.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:40.517Z,1509700780.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:40.902Z,1509700780.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:40.918Z,1509700780.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:41.301Z,1509700781.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:41.315Z,1509700781.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:41.714Z,1509700781.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:41.749Z,1509700781.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:42.114Z,1509700782.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:42.149Z,1509700782.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:42.514Z,1509700782.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:42.546Z,1509700782.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:42.904Z,1509700782.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:42.921Z,1509700782.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:43.303Z,1509700783.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:43.320Z,1509700783.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:43.703Z,1509700783.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:43.719Z,1509700783.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:44.104Z,1509700784.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:44.120Z,1509700784.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:44.503Z,1509700784.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:44.519Z,1509700784.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:44.916Z,1509700784.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:44.952Z,1509700784.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:45.318Z,1509700785.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:45.354Z,1509700785.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:45.710Z,1509700785.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:45.725Z,1509700785.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:46.103Z,1509700786.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:46.118Z,1509700786.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:46.502Z,1509700786.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:46.518Z,1509700786.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:46.904Z,1509700786.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:46.920Z,1509700786.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:47.303Z,1509700787.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:47.319Z,1509700787.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:47.718Z,1509700787.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:47.750Z,1509700787.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:48.109Z,1509700788.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:48.175Z,1509700788.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:48.512Z,1509700788.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:48.573Z,1509700788.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:48.899Z,1509700788.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:48.918Z,1509700788.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:49.303Z,1509700789.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:49.362Z,1509700789.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:49.706Z,1509700789.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:49.721Z,1509700789.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:50.107Z,1509700790.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:50.155Z,1509700790.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:50.504Z,1509700790.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:50.562Z,1509700790.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:50.912Z,1509700790.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:50.928Z,1509700790.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:51.313Z,1509700791.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:51.335Z,1509700791.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:51.712Z,1509700791.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:51.727Z,1509700791.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:52.103Z,1509700792.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:52.118Z,1509700792.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:52.506Z,1509700792.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:52.523Z,1509700792.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:52.904Z,1509700792.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:52.919Z,1509700792.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:53.307Z,1509700793.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:53.323Z,1509700793.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:53.712Z,1509700793.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:53.727Z,1509700793.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:54.112Z,1509700794.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:54.128Z,1509700794.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:54.514Z,1509700794.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:54.529Z,1509700794.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:54.901Z,1509700794.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:54.916Z,1509700794.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:55.304Z,1509700795.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:55.320Z,1509700795.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:55.706Z,1509700795.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:55.721Z,1509700795.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:56.106Z,1509700796.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:56.123Z,1509700796.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:56.504Z,1509700796.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:56.520Z,1509700796.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:56.912Z,1509700796.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:56.928Z,1509700796.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:57.313Z,1509700797.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:57.335Z,1509700797.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:57.711Z,1509700797.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:57.731Z,1509700797.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:58.109Z,1509700798.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:58.124Z,1509700798.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:58.506Z,1509700798.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:58.523Z,1509700798.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:58.933Z,1509700798.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:58.972Z,1509700798.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:59.306Z,1509700799.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:59.322Z,1509700799.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:19:59.711Z,1509700799.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:19:59.728Z,1509700799.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:00.111Z,1509700800.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:00.135Z,1509700800.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:00.512Z,1509700800.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:00.534Z,1509700800.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:00.904Z,1509700800.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:00.920Z,1509700800.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:01.304Z,1509700801.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:01.319Z,1509700801.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:01.706Z,1509700801.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:01.722Z,1509700801.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:02.107Z,1509700802.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:02.123Z,1509700802.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:02.504Z,1509700802.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:02.566Z,1509700802.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:02.912Z,1509700802.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:02.975Z,1509700802.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:06.012Z,1509700806.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:06.027Z,1509700806.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:06.166Z,1509700806.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:06.203Z,1509700806.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:06.556Z,1509700806.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:06.610Z,1509700806.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:06.955Z,1509700806.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:06.971Z,1509700806.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:07.352Z,1509700807.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:07.410Z,1509700807.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:07.765Z,1509700807.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:07.807Z,1509700807.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:08.165Z,1509700808.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:08.180Z,1509700808.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:08.564Z,1509700808.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:08.579Z,1509700808.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:08.943Z,1509700808.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:08.974Z,1509700808.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:09.353Z,1509700809.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:09.369Z,1509700809.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:09.753Z,1509700809.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:09.774Z,1509700809.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:10.143Z,1509700810.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:10.169Z,1509700810.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:10.553Z,1509700810.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:10.568Z,1509700810.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:10.965Z,1509700810.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:10.980Z,1509700810.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:11.361Z,1509700811.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:11.375Z,1509700811.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:11.764Z,1509700811.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:11.779Z,1509700811.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:12.153Z,1509700812.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:12.168Z,1509700812.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:12.543Z,1509700812.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:12.569Z,1509700812.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:12.953Z,1509700812.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:12.968Z,1509700812.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:13.352Z,1509700813.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:13.370Z,1509700813.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:13.761Z,1509700813.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:13.776Z,1509700813.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:14.165Z,1509700814.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:14.180Z,1509700814.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:14.564Z,1509700814.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:14.579Z,1509700814.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:14.943Z,1509700814.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:14.968Z,1509700814.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:15.353Z,1509700815.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:15.369Z,1509700815.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:15.752Z,1509700815.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:15.775Z,1509700815.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:16.143Z,1509700816.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:16.169Z,1509700816.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:16.553Z,1509700816.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:16.568Z,1509700816.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:16.965Z,1509700816.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:16.980Z,1509700816.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:17.365Z,1509700817.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:17.380Z,1509700817.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:17.765Z,1509700817.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:17.780Z,1509700817.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:18.143Z,1509700818.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:18.176Z,1509700818.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:18.554Z,1509700818.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:18.569Z,1509700818.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:18.954Z,1509700818.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:18.969Z,1509700818.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:19.352Z,1509700819.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:19.375Z,1509700819.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:19.761Z,1509700819.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:19.853Z,1509700819.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:20.165Z,1509700820.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:20.180Z,1509700820.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:20.564Z,1509700820.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:20.615Z,1509700820.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:20.940Z,1509700820.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:20.967Z,1509700820.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:21.354Z,1509700821.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:21.406Z,1509700821.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:21.753Z,1509700821.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:21.810Z,1509700821.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:22.155Z,1509700822.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:22.170Z,1509700822.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:22.543Z,1509700822.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:22.569Z,1509700822.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:22.966Z,1509700822.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:22.981Z,1509700822.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:23.367Z,1509700823.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:23.386Z,1509700823.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:23.765Z,1509700823.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:23.780Z,1509700823.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:24.154Z,1509700824.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:24.169Z,1509700824.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:24.540Z,1509700824.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:24.568Z,1509700824.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:24.944Z,1509700824.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:24.971Z,1509700824.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:25.355Z,1509700825.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:25.370Z,1509700825.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:25.767Z,1509700825.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:25.782Z,1509700825.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:26.166Z,1509700826.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:26.187Z,1509700826.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:26.566Z,1509700826.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:26.581Z,1509700826.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:26.941Z,1509700826.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:26.967Z,1509700826.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:27.354Z,1509700827.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:27.370Z,1509700827.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:27.754Z,1509700827.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:27.769Z,1509700827.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:28.155Z,1509700828.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:28.169Z,1509700828.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:28.553Z,1509700828.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:28.575Z,1509700828.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:28.965Z,1509700828.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:28.987Z,1509700828.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:29.366Z,1509700829.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:29.386Z,1509700829.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:29.765Z,1509700829.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:29.787Z,1509700829.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:30.144Z,1509700830.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:30.170Z,1509700830.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:30.544Z,1509700830.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:30.575Z,1509700830.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:30.945Z,1509700830.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:30.979Z,1509700830.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:31.344Z,1509700831.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:31.370Z,1509700831.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:31.760Z,1509700831.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:31.775Z,1509700831.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:32.165Z,1509700832.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:32.180Z,1509700832.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:32.565Z,1509700832.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:32.580Z,1509700832.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:32.944Z,1509700832.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:32.974Z,1509700832.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:33.343Z,1509700833.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:33.368Z,1509700833.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:33.744Z,1509700833.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:33.834Z,1509700833.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:34.141Z,1509700834.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:34.175Z,1509700834.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:34.544Z,1509700834.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:34.608Z,1509700834.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:34.966Z,1509700834.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:34.981Z,1509700834.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:35.365Z,1509700835.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:35.403Z,1509700835.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:35.766Z,1509700835.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:35.826Z,1509700835.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:36.143Z,1509700836.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:36.174Z,1509700836.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:36.541Z,1509700836.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:36.576Z,1509700836.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:36.945Z,1509700836.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:36.974Z,1509700836.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:37.345Z,1509700837.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:37.372Z,1509700837.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:37.766Z,1509700837.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:37.780Z,1509700837.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:38.166Z,1509700838.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:38.181Z,1509700838.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:38.566Z,1509700838.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:38.581Z,1509700838.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:38.940Z,1509700838.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:38.976Z,1509700838.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:39.344Z,1509700839.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:39.383Z,1509700839.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:39.744Z,1509700839.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:39.775Z,1509700839.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:40.147Z,1509700840.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:40.174Z,1509700840.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:40.544Z,1509700840.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:40.575Z,1509700840.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:40.964Z,1509700840.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:40.980Z,1509700840.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:41.362Z,1509700841.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:41.377Z,1509700841.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:41.765Z,1509700841.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:41.781Z,1509700841.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:42.145Z,1509700842.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:42.176Z,1509700842.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:42.547Z,1509700842.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:42.578Z,1509700842.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:42.945Z,1509700842.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:42.976Z,1509700842.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:43.344Z,1509700843.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:43.359Z,1509700843.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:43.757Z,1509700843.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:43.791Z,1509700843.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:44.157Z,1509700844.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:44.183Z,1509700844.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:44.557Z,1509700844.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:44.583Z,1509700844.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:44.944Z,1509700844.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:44.959Z,1509700844.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:45.347Z,1509700845.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:45.388Z,1509700845.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:45.745Z,1509700845.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:45.760Z,1509700845.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:46.145Z,1509700846.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:46.160Z,1509700846.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:46.544Z,1509700846.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:46.559Z,1509700846.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:46.962Z,1509700846.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:46.990Z,1509700846.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:47.361Z,1509700847.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:47.390Z,1509700847.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:47.761Z,1509700847.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:47.854Z,1509700847.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:48.152Z,1509700848.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:48.167Z,1509700848.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:48.552Z,1509700848.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:48.595Z,1509700848.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:48.952Z,1509700848.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:48.967Z,1509700848.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:49.351Z,1509700849.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:49.403Z,1509700849.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:49.757Z,1509700849.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:49.806Z,1509700849.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:50.157Z,1509700850.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:50.172Z,1509700850.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:50.557Z,1509700850.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:50.573Z,1509700850.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:50.952Z,1509700850.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:50.966Z,1509700850.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:51.352Z,1509700851.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:51.367Z,1509700851.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:51.752Z,1509700851.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:51.767Z,1509700851.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:52.155Z,1509700852.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:52.169Z,1509700852.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:52.552Z,1509700852.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:52.567Z,1509700852.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:52.957Z,1509700852.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:52.973Z,1509700852.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:53.356Z,1509700853.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:53.371Z,1509700853.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:53.758Z,1509700853.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:53.773Z,1509700853.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:54.152Z,1509700854.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:54.167Z,1509700854.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:54.553Z,1509700854.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:54.567Z,1509700854.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:54.953Z,1509700854.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:54.968Z,1509700854.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:55.352Z,1509700855.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:55.367Z,1509700855.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:55.757Z,1509700855.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:55.772Z,1509700855.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:56.158Z,1509700856.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:56.173Z,1509700856.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:56.557Z,1509700856.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:56.573Z,1509700856.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:56.953Z,1509700856.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:56.968Z,1509700856.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:57.354Z,1509700857.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:57.369Z,1509700857.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:57.752Z,1509700857.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:57.767Z,1509700857.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:58.156Z,1509700858.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:58.171Z,1509700858.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:58.553Z,1509700858.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:58.568Z,1509700858.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:58.964Z,1509700858.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:58.987Z,1509700858.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:59.361Z,1509700859.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:59.382Z,1509700859.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:20:59.762Z,1509700859.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:20:59.777Z,1509700859.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:00.153Z,1509700860.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:00.168Z,1509700860.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:00.551Z,1509700860.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:00.565Z,1509700860.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:00.955Z,1509700860.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:01.001Z,1509700861.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:01.380Z,1509700861.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:01.395Z,1509700861.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:01.756Z,1509700861.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:01.889Z,1509700861.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:02.184Z,1509700862.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:02.215Z,1509700862.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:02.560Z,1509700862.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:02.630Z,1509700862.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:02.954Z,1509700862.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:02.995Z,1509700862.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:08.992Z,1509700868.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:09.091Z,1509700869.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:09.091Z,1509700869.091 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 182
2017-11-03T09:21:09.091Z,1509700869.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:21:09.099Z,1509700869.099 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:09.099Z,1509700869.099 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 182
2017-11-03T09:21:09.099Z,1509700869.099 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:21:09.102Z,1509700869.102 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:09.102Z,1509700869.102 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 182
2017-11-03T09:21:09.102Z,1509700869.102 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:21:09.205Z,1509700869.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:21:09.205Z,1509700869.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:21:09.205Z,1509700869.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:21:09.267Z,1509700869.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:09.445Z,1509700869.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:21:09.446Z,1509700869.446 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 182
2017-11-03T09:21:09.446Z,1509700869.446 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:21:09.446Z,1509700869.446 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 182
2017-11-03T09:21:09.447Z,1509700869.447 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:21:09.447Z,1509700869.447 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 182
2017-11-03T09:21:09.658Z,1509700869.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:09.742Z,1509700869.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:21:09.742Z,1509700869.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:21:09.742Z,1509700869.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:21:09.743Z,1509700869.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:21:09.743Z,1509700869.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:21:09.744Z,1509700869.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:21:09.744Z,1509700869.744 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:21:09.744Z,1509700869.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:21:09.745Z,1509700869.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:21:10.062Z,1509700870.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:10.101Z,1509700870.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-03T09:21:10.102Z,1509700870.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:10.475Z,1509700870.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:10.511Z,1509700870.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-03T09:21:10.512Z,1509700870.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:10.860Z,1509700870.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:10.887Z,1509700870.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T09:21:10.888Z,1509700870.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:11.248Z,1509700871.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:11.267Z,1509700871.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-03T09:21:11.268Z,1509700871.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:11.670Z,1509700871.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:11.710Z,1509700871.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-03T09:21:11.711Z,1509700871.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:12.063Z,1509700872.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:12.091Z,1509700872.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-03T09:21:12.092Z,1509700872.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:12.462Z,1509700872.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:12.487Z,1509700872.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T09:21:12.488Z,1509700872.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:12.841Z,1509700872.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:12.879Z,1509700872.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T09:21:12.880Z,1509700872.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:13.240Z,1509700873.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:13.273Z,1509700873.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T09:21:13.274Z,1509700873.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:13.659Z,1509700873.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:13.687Z,1509700873.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T09:21:13.688Z,1509700873.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:14.063Z,1509700874.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:14.087Z,1509700874.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T09:21:14.088Z,1509700874.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:14.451Z,1509700874.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:14.494Z,1509700874.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T09:21:14.495Z,1509700874.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:14.841Z,1509700874.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:14.915Z,1509700874.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T09:21:14.916Z,1509700874.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:15.239Z,1509700875.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:15.291Z,1509700875.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T09:21:15.297Z,1509700875.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:15.661Z,1509700875.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:15.713Z,1509700875.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T09:21:15.714Z,1509700875.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:16.062Z,1509700876.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:16.101Z,1509700876.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T09:21:16.102Z,1509700876.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:16.459Z,1509700876.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:16.510Z,1509700876.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T09:21:16.511Z,1509700876.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:16.850Z,1509700876.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:16.877Z,1509700876.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T09:21:16.878Z,1509700876.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:17.250Z,1509700877.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:17.277Z,1509700877.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T09:21:17.278Z,1509700877.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:17.657Z,1509700877.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:17.672Z,1509700877.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T09:21:17.673Z,1509700877.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:18.064Z,1509700878.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:18.078Z,1509700878.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T09:21:18.079Z,1509700878.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:18.460Z,1509700878.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:18.475Z,1509700878.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T09:21:18.476Z,1509700878.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:18.850Z,1509700878.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:18.870Z,1509700878.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-03T09:21:18.871Z,1509700878.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:19.250Z,1509700879.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:19.265Z,1509700879.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-03T09:21:19.266Z,1509700879.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:19.660Z,1509700879.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:19.675Z,1509700879.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-03T09:21:19.676Z,1509700879.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:20.060Z,1509700880.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:20.075Z,1509700880.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-03T09:21:20.076Z,1509700880.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:20.461Z,1509700880.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:20.482Z,1509700880.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T09:21:20.483Z,1509700880.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:20.849Z,1509700880.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:20.864Z,1509700880.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T09:21:20.865Z,1509700880.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:21.251Z,1509700881.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:21.274Z,1509700881.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T09:21:21.275Z,1509700881.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:21.661Z,1509700881.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:21.725Z,1509700881.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T09:21:21.726Z,1509700881.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:22.060Z,1509700882.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:22.075Z,1509700882.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T09:21:22.077Z,1509700882.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:22.461Z,1509700882.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:22.482Z,1509700882.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T09:21:22.483Z,1509700882.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:22.843Z,1509700882.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:22.890Z,1509700882.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T09:21:22.891Z,1509700882.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:23.238Z,1509700883.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:23.269Z,1509700883.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T09:21:23.270Z,1509700883.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:23.660Z,1509700883.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:23.718Z,1509700883.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T09:21:23.719Z,1509700883.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:24.065Z,1509700884.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:24.111Z,1509700884.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T09:21:24.112Z,1509700884.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:24.461Z,1509700884.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:24.482Z,1509700884.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T09:21:24.483Z,1509700884.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:24.843Z,1509700884.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:24.868Z,1509700884.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T09:21:24.869Z,1509700884.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:25.238Z,1509700885.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:25.270Z,1509700885.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T09:21:25.271Z,1509700885.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:25.662Z,1509700885.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:25.682Z,1509700885.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T09:21:25.683Z,1509700885.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:26.065Z,1509700886.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:26.080Z,1509700886.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T09:21:26.081Z,1509700886.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:26.467Z,1509700886.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:26.481Z,1509700886.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T09:21:26.482Z,1509700886.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:26.841Z,1509700886.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:26.869Z,1509700886.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T09:21:26.870Z,1509700886.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:27.242Z,1509700887.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:27.323Z,1509700887.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T09:21:27.324Z,1509700887.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:27.643Z,1509700887.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:27.669Z,1509700887.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T09:21:27.670Z,1509700887.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:28.061Z,1509700888.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:28.082Z,1509700888.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T09:21:28.083Z,1509700888.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:28.454Z,1509700888.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:28.485Z,1509700888.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T09:21:28.486Z,1509700888.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:28.854Z,1509700888.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:28.880Z,1509700888.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T09:21:28.881Z,1509700888.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:29.240Z,1509700889.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:29.256Z,1509700889.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:29.640Z,1509700889.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:29.656Z,1509700889.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:30.047Z,1509700890.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:30.082Z,1509700890.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:30.440Z,1509700890.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:30.455Z,1509700890.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:30.850Z,1509700890.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:30.885Z,1509700890.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:31.253Z,1509700891.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:31.287Z,1509700891.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:31.658Z,1509700891.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:31.683Z,1509700891.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:32.045Z,1509700892.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:32.060Z,1509700892.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:32.443Z,1509700892.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:32.462Z,1509700892.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:32.844Z,1509700892.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:32.859Z,1509700892.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:33.247Z,1509700893.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:33.283Z,1509700893.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:33.658Z,1509700893.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:33.690Z,1509700893.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:34.058Z,1509700894.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:34.088Z,1509700894.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:34.458Z,1509700894.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:34.489Z,1509700894.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:34.845Z,1509700894.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:34.907Z,1509700894.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:35.243Z,1509700895.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:35.263Z,1509700895.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:35.657Z,1509700895.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:35.738Z,1509700895.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:36.061Z,1509700896.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:36.087Z,1509700896.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:36.457Z,1509700896.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:36.507Z,1509700896.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:36.844Z,1509700896.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:36.859Z,1509700896.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:37.243Z,1509700897.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:37.287Z,1509700897.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:37.626Z,1509700897.626 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T09:21:37.626Z,1509700897.626 [NAL9602] Data Fault, FailCount= 5
2017-11-03T09:21:37.626Z,1509700897.626 [NAL9602](ERROR): Data Fault
2017-11-03T09:21:37.644Z,1509700897.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:37.663Z,1509700897.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:37.761Z,1509700897.761 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T09:21:37.761Z,1509700897.761 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T09:21:38.030Z,1509700898.030 [NAL9602](INFO): Powering down
2017-11-03T09:21:38.048Z,1509700898.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:38.103Z,1509700898.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:38.179Z,1509700898.179 [CBIT](INFO): Critical error at 20171103T092137
2017-11-03T09:21:38.443Z,1509700898.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:38.457Z,1509700898.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:38.843Z,1509700898.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:38.863Z,1509700898.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:39.243Z,1509700899.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:39.258Z,1509700899.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:39.645Z,1509700899.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:39.659Z,1509700899.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:40.043Z,1509700900.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:40.058Z,1509700900.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:40.443Z,1509700900.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:40.463Z,1509700900.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:40.842Z,1509700900.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:40.857Z,1509700900.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:41.245Z,1509700901.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:41.259Z,1509700901.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:41.643Z,1509700901.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:41.663Z,1509700901.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:42.043Z,1509700902.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:42.057Z,1509700902.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:42.442Z,1509700902.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:42.457Z,1509700902.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:42.845Z,1509700902.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:42.861Z,1509700902.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:43.243Z,1509700903.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:43.258Z,1509700903.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:43.643Z,1509700903.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:43.658Z,1509700903.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:44.043Z,1509700904.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:44.063Z,1509700904.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:44.445Z,1509700904.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:44.459Z,1509700904.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:44.842Z,1509700904.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:44.857Z,1509700904.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:45.242Z,1509700905.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:45.263Z,1509700905.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:45.642Z,1509700905.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:45.658Z,1509700905.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:46.044Z,1509700906.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:46.067Z,1509700906.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:46.443Z,1509700906.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:46.463Z,1509700906.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:46.841Z,1509700906.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:46.863Z,1509700906.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:47.242Z,1509700907.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:47.258Z,1509700907.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:47.645Z,1509700907.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:47.660Z,1509700907.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:48.046Z,1509700908.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:48.061Z,1509700908.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:48.446Z,1509700908.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:48.462Z,1509700908.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:48.847Z,1509700908.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:48.911Z,1509700908.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:49.246Z,1509700909.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:49.266Z,1509700909.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:49.645Z,1509700909.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:49.661Z,1509700909.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:50.045Z,1509700910.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:50.067Z,1509700910.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:50.446Z,1509700910.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:50.511Z,1509700910.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:50.843Z,1509700910.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:50.859Z,1509700910.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:51.246Z,1509700911.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:51.298Z,1509700911.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:51.646Z,1509700911.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:51.661Z,1509700911.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:52.045Z,1509700912.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:52.102Z,1509700912.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:52.448Z,1509700912.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:52.506Z,1509700912.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:52.848Z,1509700912.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:52.862Z,1509700912.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:53.248Z,1509700913.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:53.263Z,1509700913.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:53.646Z,1509700913.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:53.667Z,1509700913.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:54.048Z,1509700914.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:54.062Z,1509700914.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:54.446Z,1509700914.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:54.461Z,1509700914.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:54.847Z,1509700914.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:54.862Z,1509700914.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:55.248Z,1509700915.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:55.263Z,1509700915.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:55.648Z,1509700915.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:55.663Z,1509700915.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:56.047Z,1509700916.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:56.062Z,1509700916.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:56.448Z,1509700916.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:56.462Z,1509700916.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:56.842Z,1509700916.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:56.857Z,1509700916.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:56.937Z,1509700916.937 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T09:21:57.247Z,1509700917.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:57.262Z,1509700917.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:57.646Z,1509700917.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:57.679Z,1509700917.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:58.045Z,1509700918.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:58.060Z,1509700918.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:58.446Z,1509700918.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:58.461Z,1509700918.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:58.844Z,1509700918.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:58.859Z,1509700918.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:59.246Z,1509700919.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:59.261Z,1509700919.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:21:59.646Z,1509700919.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:21:59.661Z,1509700919.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:00.048Z,1509700920.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:00.063Z,1509700920.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:00.448Z,1509700920.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:00.463Z,1509700920.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:00.846Z,1509700920.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:00.861Z,1509700920.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:01.248Z,1509700921.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:01.262Z,1509700921.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:01.648Z,1509700921.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:01.663Z,1509700921.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:02.048Z,1509700922.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:02.063Z,1509700922.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:02.066Z,1509700922.066 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T09:22:02.066Z,1509700922.066 [Default:CheckIn:C.Wait] Stopped
2017-11-03T09:22:02.067Z,1509700922.067 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T09:22:02.067Z,1509700922.067 [Default:CheckIn:D] Running Loop=1
2017-11-03T09:22:02.448Z,1509700922.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:02.463Z,1509700922.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:02.466Z,1509700922.466 [Default:CheckIn:D] Stopped
2017-11-03T09:22:02.467Z,1509700922.467 [Default:CheckIn:E] Running Loop=1
2017-11-03T09:22:02.849Z,1509700922.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:02.865Z,1509700922.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:02.868Z,1509700922.868 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 546.914974 min 
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn:E] Stopped
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn] Stopped
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn](INFO): Running loop #54
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn] Running Loop=54
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T09:22:02.869Z,1509700922.869 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T09:22:03.258Z,1509700923.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:03.273Z,1509700923.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:06.321Z,1509700926.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:06.373Z,1509700926.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:06.483Z,1509700926.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:06.513Z,1509700926.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:06.892Z,1509700926.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:06.952Z,1509700926.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:07.282Z,1509700927.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:07.306Z,1509700927.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:07.693Z,1509700927.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:07.753Z,1509700927.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:08.084Z,1509700928.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:08.150Z,1509700928.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:08.478Z,1509700928.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:08.512Z,1509700928.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:08.886Z,1509700928.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:08.912Z,1509700928.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:09.286Z,1509700929.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:09.311Z,1509700929.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:09.686Z,1509700929.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:09.710Z,1509700929.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:10.084Z,1509700930.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:10.110Z,1509700930.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:10.486Z,1509700930.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:10.511Z,1509700930.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:10.882Z,1509700930.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:10.907Z,1509700930.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:11.286Z,1509700931.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:11.313Z,1509700931.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:11.685Z,1509700931.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:11.710Z,1509700931.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:12.087Z,1509700932.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:12.111Z,1509700932.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:12.487Z,1509700932.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:12.513Z,1509700932.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:12.883Z,1509700932.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:12.918Z,1509700932.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:13.286Z,1509700933.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:13.311Z,1509700933.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:13.686Z,1509700933.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:13.712Z,1509700933.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:14.084Z,1509700934.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:14.109Z,1509700934.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:14.486Z,1509700934.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:14.511Z,1509700934.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:14.886Z,1509700934.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:14.911Z,1509700934.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:15.284Z,1509700935.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:15.309Z,1509700935.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:15.686Z,1509700935.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:15.711Z,1509700935.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:16.079Z,1509700936.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:16.110Z,1509700936.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:16.486Z,1509700936.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:16.511Z,1509700936.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:16.886Z,1509700936.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:16.911Z,1509700936.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:17.287Z,1509700937.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:17.312Z,1509700937.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:17.683Z,1509700937.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:17.719Z,1509700937.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:18.086Z,1509700938.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:18.111Z,1509700938.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:18.486Z,1509700938.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:18.539Z,1509700938.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:18.886Z,1509700938.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:18.927Z,1509700938.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:19.279Z,1509700939.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:19.294Z,1509700939.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:19.679Z,1509700939.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:19.731Z,1509700939.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:20.083Z,1509700940.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:20.118Z,1509700940.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:20.479Z,1509700940.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:20.527Z,1509700940.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:20.886Z,1509700940.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:20.935Z,1509700940.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:21.284Z,1509700941.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:21.319Z,1509700941.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:21.684Z,1509700941.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:21.719Z,1509700941.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:22.086Z,1509700942.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:22.118Z,1509700942.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:22.483Z,1509700942.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:22.519Z,1509700942.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:22.886Z,1509700942.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:22.917Z,1509700942.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:23.286Z,1509700943.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:23.318Z,1509700943.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:23.684Z,1509700943.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:23.718Z,1509700943.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:24.079Z,1509700944.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:24.094Z,1509700944.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:24.486Z,1509700944.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:24.518Z,1509700944.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:24.883Z,1509700944.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:24.919Z,1509700944.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:25.286Z,1509700945.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:25.318Z,1509700945.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:25.686Z,1509700945.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:25.718Z,1509700945.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:26.083Z,1509700946.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:26.119Z,1509700946.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:26.480Z,1509700946.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:26.494Z,1509700946.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:26.880Z,1509700946.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:26.895Z,1509700946.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:27.280Z,1509700947.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:27.295Z,1509700947.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:27.687Z,1509700947.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:27.724Z,1509700947.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:28.080Z,1509700948.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:28.095Z,1509700948.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:28.487Z,1509700948.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:28.518Z,1509700948.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:28.887Z,1509700948.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:28.914Z,1509700948.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:29.284Z,1509700949.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:29.300Z,1509700949.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:29.686Z,1509700949.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:29.709Z,1509700949.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:30.083Z,1509700950.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:30.099Z,1509700950.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:30.482Z,1509700950.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:30.498Z,1509700950.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:30.886Z,1509700950.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:30.923Z,1509700950.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:31.286Z,1509700951.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:31.321Z,1509700951.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:31.690Z,1509700951.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:31.783Z,1509700951.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:32.103Z,1509700952.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:32.135Z,1509700952.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:32.481Z,1509700952.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:32.524Z,1509700952.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:32.881Z,1509700952.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:32.896Z,1509700952.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:33.282Z,1509700953.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:33.336Z,1509700953.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:33.683Z,1509700953.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:33.739Z,1509700953.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:34.082Z,1509700954.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:34.097Z,1509700954.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:34.482Z,1509700954.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:34.497Z,1509700954.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:34.883Z,1509700954.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:34.903Z,1509700954.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:35.283Z,1509700955.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:35.303Z,1509700955.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:35.683Z,1509700955.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:35.698Z,1509700955.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:36.083Z,1509700956.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:36.103Z,1509700956.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:36.482Z,1509700956.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:36.497Z,1509700956.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:36.886Z,1509700956.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:36.900Z,1509700956.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:37.283Z,1509700957.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:37.303Z,1509700957.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:37.682Z,1509700957.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:37.697Z,1509700957.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:38.079Z,1509700958.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:38.094Z,1509700958.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:38.483Z,1509700958.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:38.498Z,1509700958.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:38.882Z,1509700958.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:38.898Z,1509700958.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:39.282Z,1509700959.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:39.297Z,1509700959.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:39.683Z,1509700959.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:39.699Z,1509700959.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:40.081Z,1509700960.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:40.097Z,1509700960.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:40.490Z,1509700960.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:40.524Z,1509700960.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:40.884Z,1509700960.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:40.899Z,1509700960.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:41.283Z,1509700961.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:41.303Z,1509700961.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:41.686Z,1509700961.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:41.701Z,1509700961.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:42.089Z,1509700962.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:42.124Z,1509700962.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:42.482Z,1509700962.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:42.498Z,1509700962.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:42.883Z,1509700962.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:42.898Z,1509700962.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:43.283Z,1509700963.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:43.303Z,1509700963.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:43.683Z,1509700963.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:43.703Z,1509700963.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:44.090Z,1509700964.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:44.125Z,1509700964.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:44.484Z,1509700964.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:44.538Z,1509700964.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:44.882Z,1509700964.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:44.946Z,1509700964.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:45.287Z,1509700965.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:45.302Z,1509700965.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:45.687Z,1509700965.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:45.742Z,1509700965.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:46.087Z,1509700966.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:46.102Z,1509700966.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:46.487Z,1509700966.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:46.535Z,1509700966.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:46.887Z,1509700966.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:46.939Z,1509700966.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:47.287Z,1509700967.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:47.302Z,1509700967.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:47.688Z,1509700967.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:47.702Z,1509700967.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:48.087Z,1509700968.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:48.102Z,1509700968.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:48.487Z,1509700968.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:48.502Z,1509700968.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:48.891Z,1509700968.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:48.911Z,1509700968.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:49.294Z,1509700969.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:49.309Z,1509700969.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:49.693Z,1509700969.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:49.708Z,1509700969.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:50.093Z,1509700970.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:50.107Z,1509700970.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:50.493Z,1509700970.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:50.509Z,1509700970.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:50.893Z,1509700970.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:50.908Z,1509700970.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:51.291Z,1509700971.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:51.306Z,1509700971.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:51.692Z,1509700971.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:51.708Z,1509700971.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:52.092Z,1509700972.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:52.108Z,1509700972.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:52.491Z,1509700972.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:52.506Z,1509700972.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:52.891Z,1509700972.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:52.905Z,1509700972.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:53.292Z,1509700973.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:53.307Z,1509700973.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:53.693Z,1509700973.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:53.707Z,1509700973.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:54.089Z,1509700974.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:54.104Z,1509700974.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:54.493Z,1509700974.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:54.508Z,1509700974.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:54.893Z,1509700974.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:54.908Z,1509700974.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:55.293Z,1509700975.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:55.307Z,1509700975.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:55.692Z,1509700975.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:55.707Z,1509700975.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:56.091Z,1509700976.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:56.110Z,1509700976.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:56.493Z,1509700976.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:56.507Z,1509700976.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:56.892Z,1509700976.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:56.908Z,1509700976.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:57.290Z,1509700977.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:57.306Z,1509700977.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:57.686Z,1509700977.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:57.770Z,1509700977.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:58.079Z,1509700978.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:58.115Z,1509700978.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:58.493Z,1509700978.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:58.531Z,1509700978.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:58.893Z,1509700978.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:58.907Z,1509700978.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:59.279Z,1509700979.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:59.335Z,1509700979.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:22:59.683Z,1509700979.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:22:59.732Z,1509700979.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:00.092Z,1509700980.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:00.107Z,1509700980.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:00.479Z,1509700980.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:00.511Z,1509700980.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:00.886Z,1509700980.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:00.910Z,1509700980.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:01.286Z,1509700981.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:01.310Z,1509700981.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:01.686Z,1509700981.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:01.711Z,1509700981.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:02.084Z,1509700982.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:02.108Z,1509700982.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:02.486Z,1509700982.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:02.510Z,1509700982.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:02.880Z,1509700982.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:02.911Z,1509700982.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:03.287Z,1509700983.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:03.311Z,1509700983.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:06.366Z,1509700986.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:06.382Z,1509700986.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:06.513Z,1509700986.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:06.529Z,1509700986.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:06.916Z,1509700986.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:06.938Z,1509700986.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:07.317Z,1509700987.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:07.331Z,1509700987.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:07.715Z,1509700987.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:07.731Z,1509700987.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:08.117Z,1509700988.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:08.132Z,1509700988.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:08.512Z,1509700988.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:08.527Z,1509700988.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:08.918Z,1509700988.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:08.933Z,1509700988.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:09.315Z,1509700989.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:09.331Z,1509700989.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:09.714Z,1509700989.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:09.729Z,1509700989.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:10.114Z,1509700990.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:10.135Z,1509700990.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:10.516Z,1509700990.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:10.578Z,1509700990.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:10.916Z,1509700990.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:10.979Z,1509700990.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:11.316Z,1509700991.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:11.333Z,1509700991.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:11.714Z,1509700991.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:11.730Z,1509700991.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:12.128Z,1509700992.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:12.167Z,1509700992.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:12.514Z,1509700992.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:12.530Z,1509700992.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:12.914Z,1509700992.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:12.970Z,1509700992.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:13.316Z,1509700993.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:13.365Z,1509700993.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:13.714Z,1509700993.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:13.730Z,1509700993.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:14.114Z,1509700994.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:14.129Z,1509700994.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:14.517Z,1509700994.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:14.532Z,1509700994.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:14.914Z,1509700994.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:14.931Z,1509700994.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:15.314Z,1509700995.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:15.329Z,1509700995.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:15.716Z,1509700995.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:15.731Z,1509700995.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:16.114Z,1509700996.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:16.130Z,1509700996.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:16.517Z,1509700996.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:16.531Z,1509700996.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:16.916Z,1509700996.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:16.931Z,1509700996.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:17.314Z,1509700997.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:17.330Z,1509700997.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:17.714Z,1509700997.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:17.731Z,1509700997.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:18.110Z,1509700998.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:18.125Z,1509700998.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:18.515Z,1509700998.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:18.535Z,1509700998.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:18.914Z,1509700998.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:18.935Z,1509700998.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:19.316Z,1509700999.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:19.331Z,1509700999.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:19.714Z,1509700999.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:19.730Z,1509700999.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:20.114Z,1509701000.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:20.130Z,1509701000.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:20.516Z,1509701000.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:20.531Z,1509701000.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:20.914Z,1509701000.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:20.930Z,1509701000.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:21.314Z,1509701001.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:21.330Z,1509701001.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:21.716Z,1509701001.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:21.731Z,1509701001.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:22.114Z,1509701002.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:22.130Z,1509701002.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:22.514Z,1509701002.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:22.531Z,1509701002.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:22.916Z,1509701002.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:22.931Z,1509701002.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:23.317Z,1509701003.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:23.333Z,1509701003.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:23.714Z,1509701003.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:23.731Z,1509701003.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:24.116Z,1509701004.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:24.205Z,1509701004.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:24.514Z,1509701004.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:24.530Z,1509701004.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:24.914Z,1509701004.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:24.971Z,1509701004.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:25.316Z,1509701005.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:25.331Z,1509701005.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:25.714Z,1509701005.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:25.770Z,1509701005.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:26.114Z,1509701006.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:26.174Z,1509701006.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:26.517Z,1509701006.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:26.532Z,1509701006.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:26.914Z,1509701006.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:26.935Z,1509701006.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:27.315Z,1509701007.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:27.335Z,1509701007.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:27.716Z,1509701007.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:27.731Z,1509701007.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:28.114Z,1509701008.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:28.135Z,1509701008.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:28.517Z,1509701008.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:28.532Z,1509701008.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:28.914Z,1509701008.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:28.929Z,1509701008.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:29.315Z,1509701009.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:29.331Z,1509701009.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:29.714Z,1509701009.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:29.738Z,1509701009.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:30.119Z,1509701010.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:30.133Z,1509701010.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:30.514Z,1509701010.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:30.530Z,1509701010.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:30.915Z,1509701010.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:30.931Z,1509701010.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:31.320Z,1509701011.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:31.334Z,1509701011.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:31.719Z,1509701011.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:31.734Z,1509701011.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:32.115Z,1509701012.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:32.143Z,1509701012.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:32.511Z,1509701012.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:32.537Z,1509701012.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:32.907Z,1509701012.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:32.935Z,1509701012.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:33.308Z,1509701013.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:33.335Z,1509701013.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:33.710Z,1509701013.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:33.738Z,1509701013.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:34.106Z,1509701014.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:34.133Z,1509701014.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:34.508Z,1509701014.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:34.535Z,1509701014.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:34.910Z,1509701014.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:34.937Z,1509701014.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:35.311Z,1509701015.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:35.338Z,1509701015.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:35.708Z,1509701015.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:35.735Z,1509701015.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:36.110Z,1509701016.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:36.136Z,1509701016.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:36.510Z,1509701016.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:36.536Z,1509701016.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:36.909Z,1509701016.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:36.936Z,1509701016.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:37.310Z,1509701017.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:37.363Z,1509701017.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:37.710Z,1509701017.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:37.763Z,1509701017.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:37.865Z,1509701017.865 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T09:23:37.865Z,1509701017.865 [NAL9602] No Fault, FailCount= 5
2017-11-03T09:23:38.091Z,1509701018.091 [NAL9602](INFO): Powering up NAL9602
2017-11-03T09:23:38.109Z,1509701018.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:38.141Z,1509701018.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:38.510Z,1509701018.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:38.536Z,1509701018.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:38.910Z,1509701018.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:38.937Z,1509701018.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:39.308Z,1509701019.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:39.363Z,1509701019.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:39.710Z,1509701019.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:39.735Z,1509701019.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:40.110Z,1509701020.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:40.183Z,1509701020.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:40.508Z,1509701020.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:40.539Z,1509701020.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:40.910Z,1509701020.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:40.955Z,1509701020.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:41.310Z,1509701021.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:41.342Z,1509701021.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:41.708Z,1509701021.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:41.736Z,1509701021.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:42.111Z,1509701022.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:42.147Z,1509701022.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:42.503Z,1509701022.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:42.518Z,1509701022.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:42.908Z,1509701022.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:42.924Z,1509701022.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:43.308Z,1509701023.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:43.323Z,1509701023.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:43.708Z,1509701023.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:43.723Z,1509701023.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:44.111Z,1509701024.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:44.142Z,1509701024.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:44.510Z,1509701024.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:44.545Z,1509701024.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:44.907Z,1509701024.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:44.923Z,1509701024.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:45.311Z,1509701025.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:45.342Z,1509701025.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:45.710Z,1509701025.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:45.745Z,1509701025.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:46.107Z,1509701026.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:46.123Z,1509701026.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:46.511Z,1509701026.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:46.535Z,1509701026.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:46.911Z,1509701026.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:46.946Z,1509701026.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:47.309Z,1509701027.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:47.340Z,1509701027.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:47.711Z,1509701027.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:47.746Z,1509701027.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:48.110Z,1509701028.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:48.144Z,1509701028.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:48.522Z,1509701028.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:48.551Z,1509701028.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:48.891Z,1509701028.891 [NAL9602](INFO): NAL9602 initialized
2017-11-03T09:23:48.909Z,1509701028.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:48.941Z,1509701028.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:49.308Z,1509701029.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:49.323Z,1509701029.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:49.722Z,1509701029.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:49.755Z,1509701029.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:50.122Z,1509701030.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:50.149Z,1509701030.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:50.522Z,1509701030.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:50.554Z,1509701030.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:50.911Z,1509701030.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:50.927Z,1509701030.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:51.309Z,1509701031.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:51.325Z,1509701031.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:51.707Z,1509701031.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:51.773Z,1509701031.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:52.118Z,1509701032.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:52.150Z,1509701032.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:52.512Z,1509701032.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:52.527Z,1509701032.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:52.925Z,1509701032.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:52.979Z,1509701032.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:53.322Z,1509701033.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:53.353Z,1509701033.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:53.730Z,1509701033.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:53.783Z,1509701033.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:54.111Z,1509701034.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:54.126Z,1509701034.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:54.511Z,1509701034.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:54.563Z,1509701034.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:54.922Z,1509701034.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:54.979Z,1509701034.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:55.308Z,1509701035.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:55.337Z,1509701035.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:55.730Z,1509701035.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:55.745Z,1509701035.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:56.133Z,1509701036.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:56.149Z,1509701036.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:56.529Z,1509701036.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:56.550Z,1509701036.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:56.910Z,1509701036.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:56.938Z,1509701036.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:57.309Z,1509701037.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:57.335Z,1509701037.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:57.708Z,1509701037.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:57.734Z,1509701037.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:58.111Z,1509701038.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:58.138Z,1509701038.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:58.509Z,1509701038.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:58.535Z,1509701038.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:58.929Z,1509701038.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:58.944Z,1509701038.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:59.334Z,1509701039.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:59.349Z,1509701039.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:23:59.730Z,1509701039.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:23:59.745Z,1509701039.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:00.108Z,1509701040.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:00.134Z,1509701040.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:00.510Z,1509701040.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:00.549Z,1509701040.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:00.909Z,1509701040.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:00.943Z,1509701040.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:01.310Z,1509701041.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:01.336Z,1509701041.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:01.730Z,1509701041.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:01.745Z,1509701041.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:02.133Z,1509701042.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:02.155Z,1509701042.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:02.529Z,1509701042.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:02.550Z,1509701042.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:02.911Z,1509701042.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:02.938Z,1509701042.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:03.312Z,1509701043.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:03.338Z,1509701043.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:06.422Z,1509701046.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:06.455Z,1509701046.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:06.596Z,1509701046.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:06.635Z,1509701046.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:06.998Z,1509701046.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:07.043Z,1509701047.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:07.397Z,1509701047.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:07.412Z,1509701047.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:07.806Z,1509701047.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:07.837Z,1509701047.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:08.191Z,1509701048.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:08.242Z,1509701048.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:08.591Z,1509701048.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:08.606Z,1509701048.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:08.992Z,1509701048.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:09.043Z,1509701049.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:09.391Z,1509701049.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:09.406Z,1509701049.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:09.805Z,1509701049.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:09.858Z,1509701049.858 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:09.858Z,1509701049.858 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 183
2017-11-03T09:24:09.858Z,1509701049.858 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:24:09.860Z,1509701049.860 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:09.860Z,1509701049.860 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 183
2017-11-03T09:24:09.860Z,1509701049.860 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:24:09.862Z,1509701049.862 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:09.863Z,1509701049.863 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 183
2017-11-03T09:24:09.863Z,1509701049.863 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:24:09.984Z,1509701049.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:24:09.985Z,1509701049.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:24:09.985Z,1509701049.985 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:24:10.195Z,1509701050.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:10.312Z,1509701050.312 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:24:10.313Z,1509701050.313 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 183
2017-11-03T09:24:10.313Z,1509701050.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:24:10.313Z,1509701050.313 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 183
2017-11-03T09:24:10.314Z,1509701050.314 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:24:10.314Z,1509701050.314 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 183
2017-11-03T09:24:10.595Z,1509701050.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:10.613Z,1509701050.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:24:10.614Z,1509701050.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:24:10.614Z,1509701050.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:24:10.615Z,1509701050.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:24:10.615Z,1509701050.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:24:10.615Z,1509701050.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:24:10.616Z,1509701050.616 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:24:10.616Z,1509701050.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:24:10.617Z,1509701050.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:24:10.988Z,1509701050.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:11.010Z,1509701051.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:24:11.011Z,1509701051.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:11.394Z,1509701051.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:11.414Z,1509701051.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:24:11.415Z,1509701051.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:11.795Z,1509701051.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:11.814Z,1509701051.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:24:11.815Z,1509701051.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:12.195Z,1509701052.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:12.210Z,1509701052.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:24:12.210Z,1509701052.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:12.594Z,1509701052.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:12.614Z,1509701052.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:24:12.615Z,1509701052.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:13.004Z,1509701053.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:13.019Z,1509701053.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:24:13.020Z,1509701053.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:13.404Z,1509701053.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:13.418Z,1509701053.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:24:13.419Z,1509701053.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:13.806Z,1509701053.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:13.820Z,1509701053.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:24:13.821Z,1509701053.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:14.192Z,1509701054.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:14.207Z,1509701054.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-03T09:24:14.208Z,1509701054.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:14.594Z,1509701054.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:14.609Z,1509701054.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:24:14.610Z,1509701054.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:14.993Z,1509701054.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:15.008Z,1509701055.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:24:15.009Z,1509701055.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:15.394Z,1509701055.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:15.414Z,1509701055.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:24:15.415Z,1509701055.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:15.801Z,1509701055.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:15.816Z,1509701055.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:24:15.817Z,1509701055.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:16.204Z,1509701056.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:16.226Z,1509701056.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:24:16.227Z,1509701056.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:16.604Z,1509701056.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:16.619Z,1509701056.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:24:16.620Z,1509701056.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:16.992Z,1509701056.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:17.007Z,1509701057.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-03T09:24:17.008Z,1509701057.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:17.397Z,1509701057.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:17.411Z,1509701057.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:24:17.412Z,1509701057.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:17.796Z,1509701057.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:17.811Z,1509701057.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:24:17.812Z,1509701057.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:18.197Z,1509701058.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:18.212Z,1509701058.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T09:24:18.213Z,1509701058.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:18.595Z,1509701058.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:18.618Z,1509701058.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T09:24:18.619Z,1509701058.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:19.005Z,1509701059.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:19.020Z,1509701059.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:24:19.021Z,1509701059.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:19.405Z,1509701059.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:19.420Z,1509701059.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:24:19.421Z,1509701059.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:19.806Z,1509701059.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:19.826Z,1509701059.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:24:19.827Z,1509701059.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:20.194Z,1509701060.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:20.215Z,1509701060.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:24:20.216Z,1509701060.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:20.594Z,1509701060.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:20.626Z,1509701060.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:24:20.627Z,1509701060.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:20.991Z,1509701060.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:21.006Z,1509701061.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T09:24:21.007Z,1509701061.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:21.393Z,1509701061.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:21.408Z,1509701061.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-03T09:24:21.409Z,1509701061.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:21.805Z,1509701061.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:21.867Z,1509701061.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:24:21.868Z,1509701061.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:22.208Z,1509701062.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:22.222Z,1509701062.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:24:22.223Z,1509701062.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:22.606Z,1509701062.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:22.621Z,1509701062.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:24:22.622Z,1509701062.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:22.995Z,1509701062.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:23.051Z,1509701063.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:24:23.052Z,1509701063.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:23.380Z,1509701063.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:23.411Z,1509701063.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:24:23.412Z,1509701063.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:23.787Z,1509701063.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:23.853Z,1509701063.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:24:23.854Z,1509701063.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:24.187Z,1509701064.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:24.239Z,1509701064.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:24:24.240Z,1509701064.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:24.587Z,1509701064.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:24.612Z,1509701064.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:24:24.613Z,1509701064.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:25.003Z,1509701065.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:25.023Z,1509701065.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:24:25.024Z,1509701065.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:25.409Z,1509701065.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:25.424Z,1509701065.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:24:25.425Z,1509701065.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:25.805Z,1509701065.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:25.820Z,1509701065.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:24:25.822Z,1509701065.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:26.184Z,1509701066.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:26.219Z,1509701066.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:24:26.220Z,1509701066.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:26.586Z,1509701066.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:26.611Z,1509701066.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:24:26.612Z,1509701066.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:26.987Z,1509701066.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:27.012Z,1509701067.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:24:27.013Z,1509701067.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:27.386Z,1509701067.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:27.411Z,1509701067.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:24:27.412Z,1509701067.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:27.805Z,1509701067.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:27.820Z,1509701067.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:24:27.821Z,1509701067.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:28.209Z,1509701068.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:28.223Z,1509701068.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:24:28.225Z,1509701068.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:28.605Z,1509701068.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:28.620Z,1509701068.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:24:28.621Z,1509701068.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:28.986Z,1509701068.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:29.011Z,1509701069.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:24:29.013Z,1509701069.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:29.387Z,1509701069.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:29.438Z,1509701069.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:24:29.439Z,1509701069.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:29.785Z,1509701069.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:29.813Z,1509701069.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T09:24:29.814Z,1509701069.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:30.187Z,1509701070.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:30.213Z,1509701070.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:30.587Z,1509701070.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:30.612Z,1509701070.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:31.005Z,1509701071.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:31.020Z,1509701071.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:31.409Z,1509701071.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:31.424Z,1509701071.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:31.805Z,1509701071.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:31.820Z,1509701071.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:32.184Z,1509701072.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:32.216Z,1509701072.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:32.586Z,1509701072.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:32.618Z,1509701072.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:32.984Z,1509701072.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:33.015Z,1509701073.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:33.385Z,1509701073.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:33.416Z,1509701073.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:33.812Z,1509701073.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:33.827Z,1509701073.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:34.198Z,1509701074.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:34.227Z,1509701074.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:34.598Z,1509701074.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:34.627Z,1509701074.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:34.987Z,1509701074.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:35.021Z,1509701075.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:35.385Z,1509701075.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:35.417Z,1509701075.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:35.791Z,1509701075.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:35.827Z,1509701075.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:36.187Z,1509701076.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:36.243Z,1509701076.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:36.584Z,1509701076.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:36.599Z,1509701076.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:36.997Z,1509701076.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:37.027Z,1509701077.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:37.393Z,1509701077.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:37.443Z,1509701077.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:37.798Z,1509701077.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:37.827Z,1509701077.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:38.184Z,1509701078.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:38.238Z,1509701078.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:38.587Z,1509701078.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:38.628Z,1509701078.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:38.985Z,1509701078.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:39.016Z,1509701079.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:39.391Z,1509701079.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:39.427Z,1509701079.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:39.798Z,1509701079.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:39.824Z,1509701079.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:40.197Z,1509701080.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:40.223Z,1509701080.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:40.597Z,1509701080.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:40.623Z,1509701080.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:40.984Z,1509701080.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:41.026Z,1509701081.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:41.384Z,1509701081.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:41.399Z,1509701081.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:41.791Z,1509701081.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:41.827Z,1509701081.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:42.188Z,1509701082.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:42.203Z,1509701082.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:42.584Z,1509701082.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:42.599Z,1509701082.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:43.001Z,1509701083.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:43.032Z,1509701083.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:43.401Z,1509701083.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:43.437Z,1509701083.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:43.798Z,1509701083.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:43.829Z,1509701083.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:44.187Z,1509701084.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:44.207Z,1509701084.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:44.584Z,1509701084.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:44.599Z,1509701084.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:44.991Z,1509701084.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:45.007Z,1509701085.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:45.390Z,1509701085.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:45.411Z,1509701085.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:45.802Z,1509701085.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:45.832Z,1509701085.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:46.197Z,1509701086.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:46.229Z,1509701086.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:46.601Z,1509701086.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:46.632Z,1509701086.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:46.988Z,1509701086.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:47.003Z,1509701087.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:47.384Z,1509701087.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:47.399Z,1509701087.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:47.788Z,1509701087.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:47.803Z,1509701087.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:48.191Z,1509701088.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:48.211Z,1509701088.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:48.584Z,1509701088.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:48.607Z,1509701088.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:49.002Z,1509701089.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:49.032Z,1509701089.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:49.405Z,1509701089.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:49.435Z,1509701089.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:49.798Z,1509701089.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:49.829Z,1509701089.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:50.188Z,1509701090.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:50.203Z,1509701090.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:50.591Z,1509701090.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:50.659Z,1509701090.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:50.988Z,1509701090.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:51.003Z,1509701091.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:51.388Z,1509701091.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:51.443Z,1509701091.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:51.807Z,1509701091.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:51.836Z,1509701091.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:52.201Z,1509701092.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:52.255Z,1509701092.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:52.601Z,1509701092.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:52.655Z,1509701092.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:52.992Z,1509701092.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:53.015Z,1509701093.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:53.388Z,1509701093.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:53.411Z,1509701093.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:53.789Z,1509701093.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:53.811Z,1509701093.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:54.189Z,1509701094.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:54.204Z,1509701094.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:54.588Z,1509701094.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:54.603Z,1509701094.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:55.001Z,1509701095.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:55.033Z,1509701095.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:55.402Z,1509701095.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:55.437Z,1509701095.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:55.802Z,1509701095.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:55.834Z,1509701095.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:56.189Z,1509701096.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:56.204Z,1509701096.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:56.588Z,1509701096.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:56.604Z,1509701096.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:56.989Z,1509701096.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:57.004Z,1509701097.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:57.388Z,1509701097.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:57.404Z,1509701097.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:57.806Z,1509701097.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:57.839Z,1509701097.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:58.194Z,1509701098.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:58.210Z,1509701098.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:58.598Z,1509701098.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:58.614Z,1509701098.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:58.991Z,1509701098.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:59.006Z,1509701099.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:59.392Z,1509701099.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:59.407Z,1509701099.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:24:59.793Z,1509701099.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:24:59.808Z,1509701099.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:00.192Z,1509701100.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:00.207Z,1509701100.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:00.592Z,1509701100.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:00.607Z,1509701100.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:00.998Z,1509701100.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:01.013Z,1509701101.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:01.405Z,1509701101.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:01.438Z,1509701101.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:01.806Z,1509701101.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:01.838Z,1509701101.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:02.191Z,1509701102.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:02.206Z,1509701102.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:02.591Z,1509701102.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:02.606Z,1509701102.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:02.993Z,1509701102.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:03.008Z,1509701103.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:03.392Z,1509701103.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:03.407Z,1509701103.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:06.490Z,1509701106.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:06.583Z,1509701106.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:06.742Z,1509701106.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:06.785Z,1509701106.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:07.138Z,1509701107.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:07.153Z,1509701107.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:07.520Z,1509701107.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:07.584Z,1509701107.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:07.930Z,1509701107.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:07.945Z,1509701107.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:08.316Z,1509701108.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:08.386Z,1509701108.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:08.734Z,1509701108.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:08.794Z,1509701108.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:09.133Z,1509701109.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:09.155Z,1509701109.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:09.537Z,1509701109.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:09.559Z,1509701109.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:09.919Z,1509701109.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:09.945Z,1509701109.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:10.313Z,1509701110.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:10.345Z,1509701110.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:10.717Z,1509701110.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:10.751Z,1509701110.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:11.120Z,1509701111.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:11.145Z,1509701111.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:11.513Z,1509701111.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:11.544Z,1509701111.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:11.938Z,1509701111.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:11.953Z,1509701111.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:12.325Z,1509701112.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:12.358Z,1509701112.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:12.737Z,1509701112.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:12.759Z,1509701112.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:13.117Z,1509701113.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:13.148Z,1509701113.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:13.512Z,1509701113.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:13.527Z,1509701113.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:13.913Z,1509701113.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:13.928Z,1509701113.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:14.317Z,1509701114.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:14.332Z,1509701114.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:14.729Z,1509701114.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:14.754Z,1509701114.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:15.129Z,1509701115.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:15.153Z,1509701115.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:15.529Z,1509701115.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:15.559Z,1509701115.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:15.916Z,1509701115.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:15.931Z,1509701115.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:16.317Z,1509701116.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:16.332Z,1509701116.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:16.719Z,1509701116.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:16.751Z,1509701116.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:17.118Z,1509701117.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:17.151Z,1509701117.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:17.517Z,1509701117.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:17.532Z,1509701117.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:17.930Z,1509701117.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:17.951Z,1509701117.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:18.329Z,1509701118.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:18.358Z,1509701118.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:18.739Z,1509701118.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:18.754Z,1509701118.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:19.119Z,1509701119.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:19.150Z,1509701119.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:19.523Z,1509701119.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:19.551Z,1509701119.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:19.924Z,1509701119.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:19.951Z,1509701119.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:20.319Z,1509701120.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:20.350Z,1509701120.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:20.725Z,1509701120.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:20.782Z,1509701120.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:21.140Z,1509701121.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:21.183Z,1509701121.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:21.529Z,1509701121.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:21.553Z,1509701121.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:21.915Z,1509701121.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:21.930Z,1509701121.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:22.316Z,1509701122.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:22.370Z,1509701122.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:22.723Z,1509701122.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:22.758Z,1509701122.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:23.116Z,1509701123.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:23.167Z,1509701123.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:23.516Z,1509701123.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:23.575Z,1509701123.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:23.929Z,1509701123.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:23.953Z,1509701123.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:24.344Z,1509701124.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:24.362Z,1509701124.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:24.730Z,1509701124.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:24.753Z,1509701124.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:25.116Z,1509701125.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:25.132Z,1509701125.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:25.516Z,1509701125.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:25.531Z,1509701125.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:25.916Z,1509701125.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:25.931Z,1509701125.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:26.316Z,1509701126.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:26.331Z,1509701126.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:26.730Z,1509701126.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:26.754Z,1509701126.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:27.131Z,1509701127.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:27.154Z,1509701127.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:27.530Z,1509701127.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:27.554Z,1509701127.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:27.915Z,1509701127.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:27.930Z,1509701127.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:28.316Z,1509701128.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:28.331Z,1509701128.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:28.716Z,1509701128.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:28.731Z,1509701128.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:29.116Z,1509701129.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:29.130Z,1509701129.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:29.516Z,1509701129.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:29.531Z,1509701129.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:29.929Z,1509701129.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:29.953Z,1509701129.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:30.329Z,1509701130.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:30.354Z,1509701130.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:30.730Z,1509701130.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:30.753Z,1509701130.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:31.115Z,1509701131.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:31.131Z,1509701131.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:31.515Z,1509701131.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:31.530Z,1509701131.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:31.920Z,1509701131.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:31.935Z,1509701131.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:32.323Z,1509701132.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:32.354Z,1509701132.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:32.729Z,1509701132.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:32.759Z,1509701132.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:33.129Z,1509701133.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:33.160Z,1509701133.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:33.529Z,1509701133.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:33.560Z,1509701133.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:33.916Z,1509701133.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:33.930Z,1509701133.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:34.319Z,1509701134.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:34.339Z,1509701134.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:34.716Z,1509701134.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:34.731Z,1509701134.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:35.116Z,1509701135.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:35.131Z,1509701135.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:35.516Z,1509701135.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:35.595Z,1509701135.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:35.929Z,1509701135.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:35.945Z,1509701135.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:36.337Z,1509701136.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:36.375Z,1509701136.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:36.730Z,1509701136.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:36.745Z,1509701136.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:37.121Z,1509701137.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:37.171Z,1509701137.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:37.520Z,1509701137.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:37.563Z,1509701137.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:37.924Z,1509701137.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:37.939Z,1509701137.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:38.323Z,1509701138.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:38.338Z,1509701138.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:38.737Z,1509701138.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:38.766Z,1509701138.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:39.137Z,1509701139.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:39.166Z,1509701139.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:39.529Z,1509701139.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:39.545Z,1509701139.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:39.920Z,1509701139.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:39.935Z,1509701139.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:40.324Z,1509701140.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:40.339Z,1509701140.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:40.723Z,1509701140.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:40.738Z,1509701140.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:41.122Z,1509701141.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:41.137Z,1509701141.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:41.523Z,1509701141.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:41.543Z,1509701141.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:41.929Z,1509701141.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:41.945Z,1509701141.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:42.337Z,1509701142.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:42.367Z,1509701142.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:42.737Z,1509701142.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:42.766Z,1509701142.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:43.124Z,1509701143.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:43.139Z,1509701143.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:43.525Z,1509701143.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:43.539Z,1509701143.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:43.925Z,1509701143.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:43.940Z,1509701143.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:44.323Z,1509701144.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:44.343Z,1509701144.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:44.726Z,1509701144.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:44.741Z,1509701144.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:45.138Z,1509701145.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:45.167Z,1509701145.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:45.530Z,1509701145.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:45.546Z,1509701145.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:45.923Z,1509701145.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:45.943Z,1509701145.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:46.322Z,1509701146.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:46.337Z,1509701146.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:46.723Z,1509701146.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:46.739Z,1509701146.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:47.126Z,1509701147.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:47.142Z,1509701147.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:47.523Z,1509701147.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:47.539Z,1509701147.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:47.930Z,1509701147.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:47.967Z,1509701147.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:48.330Z,1509701148.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:48.346Z,1509701148.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:48.738Z,1509701148.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:48.766Z,1509701148.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:49.123Z,1509701149.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:49.186Z,1509701149.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:49.526Z,1509701149.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:49.560Z,1509701149.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:49.927Z,1509701149.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:49.943Z,1509701149.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:50.323Z,1509701150.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:50.380Z,1509701150.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:50.736Z,1509701150.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:50.751Z,1509701150.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:51.132Z,1509701151.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:51.190Z,1509701151.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:51.536Z,1509701151.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:51.590Z,1509701151.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:51.926Z,1509701151.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:51.941Z,1509701151.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:52.321Z,1509701152.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:52.336Z,1509701152.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:52.724Z,1509701152.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:52.739Z,1509701152.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:53.125Z,1509701153.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:53.139Z,1509701153.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:53.523Z,1509701153.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:53.538Z,1509701153.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:53.936Z,1509701153.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:53.951Z,1509701153.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:54.333Z,1509701154.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:54.348Z,1509701154.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:54.736Z,1509701154.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:54.751Z,1509701154.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:55.123Z,1509701155.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:55.139Z,1509701155.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:55.522Z,1509701155.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:55.545Z,1509701155.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:55.927Z,1509701155.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:55.942Z,1509701155.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:56.323Z,1509701156.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:56.339Z,1509701156.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:56.733Z,1509701156.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:56.748Z,1509701156.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:57.135Z,1509701157.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:57.155Z,1509701157.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:57.536Z,1509701157.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:57.551Z,1509701157.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:57.922Z,1509701157.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:57.945Z,1509701157.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:58.320Z,1509701158.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:58.338Z,1509701158.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:58.723Z,1509701158.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:58.739Z,1509701158.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:59.121Z,1509701159.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:59.139Z,1509701159.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:59.527Z,1509701159.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:59.547Z,1509701159.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:25:59.935Z,1509701159.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:25:59.955Z,1509701159.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:00.336Z,1509701160.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:00.358Z,1509701160.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:00.733Z,1509701160.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:00.748Z,1509701160.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:01.124Z,1509701161.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:01.140Z,1509701161.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:01.527Z,1509701161.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:01.546Z,1509701161.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:01.925Z,1509701161.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:01.940Z,1509701161.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:02.329Z,1509701162.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:02.357Z,1509701162.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:02.743Z,1509701162.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:02.835Z,1509701162.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:03.167Z,1509701163.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:03.199Z,1509701163.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:03.557Z,1509701163.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:03.681Z,1509701163.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:12.389Z,1509701172.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:12.422Z,1509701172.422 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:26:12.422Z,1509701172.422 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:26:12.422Z,1509701172.422 [BPC1](ERROR): Communications Fault
2017-11-03T09:26:12.484Z,1509701172.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:12.573Z,1509701172.573 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:26:12.653Z,1509701172.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:12.726Z,1509701172.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:13.034Z,1509701173.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:13.094Z,1509701173.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:13.428Z,1509701173.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:13.486Z,1509701173.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:13.581Z,1509701173.581 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:26:13.581Z,1509701173.581 [BPC1] No Fault, FailCount= 1
2017-11-03T09:26:13.825Z,1509701173.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:13.966Z,1509701173.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:14.236Z,1509701174.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:14.342Z,1509701174.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:14.616Z,1509701174.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:14.662Z,1509701174.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:15.013Z,1509701175.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:15.041Z,1509701175.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:15.419Z,1509701175.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:15.434Z,1509701175.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:15.821Z,1509701175.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:15.836Z,1509701175.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:16.222Z,1509701176.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:16.237Z,1509701176.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:16.622Z,1509701176.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:16.637Z,1509701176.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:17.007Z,1509701177.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:17.021Z,1509701177.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:17.407Z,1509701177.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:17.427Z,1509701177.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:17.807Z,1509701177.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:17.822Z,1509701177.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:18.227Z,1509701178.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:18.262Z,1509701178.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:18.609Z,1509701178.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:18.643Z,1509701178.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:19.020Z,1509701179.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:19.043Z,1509701179.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:19.423Z,1509701179.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:19.466Z,1509701179.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:19.856Z,1509701179.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:19.896Z,1509701179.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:20.208Z,1509701180.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:20.231Z,1509701180.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:20.607Z,1509701180.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:20.623Z,1509701180.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:21.008Z,1509701181.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:21.062Z,1509701181.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:21.408Z,1509701181.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:21.471Z,1509701181.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:21.818Z,1509701181.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:21.855Z,1509701181.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:22.223Z,1509701182.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:22.255Z,1509701182.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:22.642Z,1509701182.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:22.686Z,1509701182.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:23.008Z,1509701183.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:23.055Z,1509701183.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:23.409Z,1509701183.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:23.455Z,1509701183.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:23.808Z,1509701183.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:23.842Z,1509701183.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:24.228Z,1509701184.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:24.259Z,1509701184.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:24.609Z,1509701184.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:24.655Z,1509701184.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:25.027Z,1509701185.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:25.055Z,1509701185.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:25.431Z,1509701185.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:25.494Z,1509701185.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:25.860Z,1509701185.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:25.947Z,1509701185.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:26.208Z,1509701186.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:26.279Z,1509701186.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:26.634Z,1509701186.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:26.662Z,1509701186.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:27.040Z,1509701187.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:27.110Z,1509701187.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:27.417Z,1509701187.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:27.458Z,1509701187.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:27.821Z,1509701187.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:27.870Z,1509701187.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:28.221Z,1509701188.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:28.253Z,1509701188.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:28.626Z,1509701188.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:28.679Z,1509701188.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:29.011Z,1509701189.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:29.026Z,1509701189.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:29.408Z,1509701189.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:29.423Z,1509701189.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:29.812Z,1509701189.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:29.827Z,1509701189.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:30.215Z,1509701190.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:30.230Z,1509701190.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:30.614Z,1509701190.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:30.651Z,1509701190.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:31.026Z,1509701191.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:31.049Z,1509701191.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:31.429Z,1509701191.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:31.452Z,1509701191.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:31.821Z,1509701191.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:31.854Z,1509701191.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:32.212Z,1509701192.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:32.227Z,1509701192.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:32.615Z,1509701192.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:32.630Z,1509701192.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:33.009Z,1509701193.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:33.024Z,1509701193.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:33.408Z,1509701193.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:33.423Z,1509701193.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:33.826Z,1509701193.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:33.856Z,1509701193.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:34.222Z,1509701194.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:34.253Z,1509701194.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:34.626Z,1509701194.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:34.655Z,1509701194.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:35.011Z,1509701195.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:35.027Z,1509701195.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:35.411Z,1509701195.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:35.431Z,1509701195.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:35.812Z,1509701195.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:35.827Z,1509701195.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:36.212Z,1509701196.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:36.227Z,1509701196.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:36.611Z,1509701196.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:36.627Z,1509701196.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:37.026Z,1509701197.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:37.057Z,1509701197.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:37.430Z,1509701197.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:37.452Z,1509701197.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:37.842Z,1509701197.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:37.858Z,1509701197.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:38.211Z,1509701198.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:38.227Z,1509701198.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:38.611Z,1509701198.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:38.627Z,1509701198.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:39.012Z,1509701199.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:39.028Z,1509701199.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:39.411Z,1509701199.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:39.427Z,1509701199.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:39.826Z,1509701199.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:39.856Z,1509701199.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:40.226Z,1509701200.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:40.254Z,1509701200.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:40.626Z,1509701200.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:40.722Z,1509701200.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:41.016Z,1509701201.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:41.031Z,1509701201.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:41.415Z,1509701201.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:41.467Z,1509701201.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:41.814Z,1509701201.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:41.830Z,1509701201.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:42.217Z,1509701202.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:42.267Z,1509701202.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:42.615Z,1509701202.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:42.667Z,1509701202.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:43.030Z,1509701203.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:43.061Z,1509701203.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:43.430Z,1509701203.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:43.461Z,1509701203.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:43.830Z,1509701203.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:43.861Z,1509701203.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:44.215Z,1509701204.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:44.231Z,1509701204.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:44.615Z,1509701204.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:44.639Z,1509701204.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:45.016Z,1509701205.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:45.039Z,1509701205.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:45.415Z,1509701205.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:45.430Z,1509701205.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:45.830Z,1509701205.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:45.861Z,1509701205.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:46.230Z,1509701206.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:46.264Z,1509701206.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:46.622Z,1509701206.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:46.637Z,1509701206.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:47.016Z,1509701207.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:47.032Z,1509701207.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:47.413Z,1509701207.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:47.428Z,1509701207.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:47.814Z,1509701207.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:47.843Z,1509701207.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:48.218Z,1509701208.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:48.233Z,1509701208.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:48.618Z,1509701208.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:48.633Z,1509701208.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:49.022Z,1509701209.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:49.037Z,1509701209.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:49.420Z,1509701209.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:49.435Z,1509701209.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:49.820Z,1509701209.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:49.836Z,1509701209.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:50.219Z,1509701210.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:50.235Z,1509701210.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:50.624Z,1509701210.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:50.647Z,1509701210.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:51.021Z,1509701211.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:51.036Z,1509701211.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:51.416Z,1509701211.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:51.440Z,1509701211.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:51.830Z,1509701211.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:51.845Z,1509701211.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:52.229Z,1509701212.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:52.251Z,1509701212.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:52.631Z,1509701212.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:52.651Z,1509701212.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:53.018Z,1509701213.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:53.033Z,1509701213.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:53.419Z,1509701213.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:53.435Z,1509701213.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:53.842Z,1509701213.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:53.872Z,1509701213.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:54.220Z,1509701214.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:54.236Z,1509701214.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:54.629Z,1509701214.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:54.739Z,1509701214.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:55.029Z,1509701215.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:55.051Z,1509701215.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:55.429Z,1509701215.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:55.483Z,1509701215.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:55.805Z,1509701215.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:55.831Z,1509701215.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:56.218Z,1509701216.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:56.275Z,1509701216.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:56.619Z,1509701216.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:56.695Z,1509701216.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:57.029Z,1509701217.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:57.045Z,1509701217.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:57.429Z,1509701217.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:57.445Z,1509701217.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:57.829Z,1509701217.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:57.844Z,1509701217.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:58.218Z,1509701218.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:58.239Z,1509701218.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:58.325Z,1509701218.325 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T09:26:58.325Z,1509701218.325 [DropWeight] No Fault, FailCount= 1
2017-11-03T09:26:58.618Z,1509701218.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:58.639Z,1509701218.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:59.020Z,1509701219.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:59.034Z,1509701219.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:59.404Z,1509701219.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:59.430Z,1509701219.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:26:59.829Z,1509701219.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:26:59.844Z,1509701219.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:00.232Z,1509701220.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:00.247Z,1509701220.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:00.624Z,1509701220.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:00.639Z,1509701220.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:01.016Z,1509701221.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:01.037Z,1509701221.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:01.419Z,1509701221.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:01.434Z,1509701221.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:01.806Z,1509701221.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:01.831Z,1509701221.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:02.217Z,1509701222.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:02.232Z,1509701222.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:02.639Z,1509701222.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:02.654Z,1509701222.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:03.025Z,1509701223.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:03.040Z,1509701223.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:03.044Z,1509701223.044 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T09:22:02.9Z
2017-11-03T09:27:03.044Z,1509701223.044 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T09:27:03.044Z,1509701223.044 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T09:27:03.429Z,1509701223.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:03.444Z,1509701223.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:03.931Z,1509701223.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:03.947Z,1509701223.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:06.918Z,1509701226.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:06.934Z,1509701226.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:07.045Z,1509701227.045 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171103T001125/Courier0216.lzma
2017-11-03T09:27:07.083Z,1509701227.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:07.127Z,1509701227.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:07.484Z,1509701227.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:07.500Z,1509701227.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:07.843Z,1509701227.843 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0216.lzma.bak
2017-11-03T09:27:07.844Z,1509701227.844 [DataOverHttps](INFO): SBD MOMSN=5183230
2017-11-03T09:27:07.891Z,1509701227.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:07.926Z,1509701227.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:08.501Z,1509701228.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:08.595Z,1509701228.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:08.739Z,1509701228.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:08.778Z,1509701228.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:11.832Z,1509701231.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:11.884Z,1509701231.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:11.884Z,1509701231.884 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 184
2017-11-03T09:27:11.884Z,1509701231.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:27:11.886Z,1509701231.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:11.886Z,1509701231.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 184
2017-11-03T09:27:11.886Z,1509701231.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:27:11.888Z,1509701231.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:11.889Z,1509701231.889 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 184
2017-11-03T09:27:11.889Z,1509701231.889 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:27:11.969Z,1509701231.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:27:11.969Z,1509701231.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:27:11.969Z,1509701231.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:27:12.017Z,1509701232.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:12.128Z,1509701232.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:27:12.129Z,1509701232.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 184
2017-11-03T09:27:12.129Z,1509701232.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:27:12.129Z,1509701232.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 184
2017-11-03T09:27:12.130Z,1509701232.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:27:12.130Z,1509701232.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 184
2017-11-03T09:27:12.428Z,1509701232.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:12.473Z,1509701232.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:27:12.474Z,1509701232.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:27:12.474Z,1509701232.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:27:12.475Z,1509701232.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:27:12.475Z,1509701232.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:27:12.475Z,1509701232.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:27:12.476Z,1509701232.476 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:27:12.476Z,1509701232.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:27:12.477Z,1509701232.477 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:27:12.820Z,1509701232.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:12.874Z,1509701232.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-03T09:27:12.875Z,1509701232.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:13.223Z,1509701233.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:13.238Z,1509701233.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-03T09:27:13.239Z,1509701233.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:13.618Z,1509701233.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:13.638Z,1509701233.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-03T09:27:13.639Z,1509701233.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:16.699Z,1509701236.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:16.714Z,1509701236.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:27:16.714Z,1509701236.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:16.817Z,1509701236.817 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20171103T001125/Express0217.lzma
2017-11-03T09:27:16.840Z,1509701236.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:16.883Z,1509701236.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T09:27:16.884Z,1509701236.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:17.262Z,1509701237.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:17.277Z,1509701237.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T09:27:17.278Z,1509701237.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:17.619Z,1509701237.619 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0217.lzma.bak
2017-11-03T09:27:17.619Z,1509701237.619 [DataOverHttps](INFO): SBD MOMSN=5183233
2017-11-03T09:27:17.671Z,1509701237.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:17.686Z,1509701237.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T09:27:17.687Z,1509701237.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:18.263Z,1509701238.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:18.278Z,1509701238.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:27:18.279Z,1509701238.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:18.282Z,1509701238.282 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T09:27:18.282Z,1509701238.282 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T09:27:18.282Z,1509701238.282 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T09:27:18.439Z,1509701238.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:18.465Z,1509701238.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T09:27:18.466Z,1509701238.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:21.551Z,1509701241.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:21.566Z,1509701241.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T09:27:21.567Z,1509701241.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:21.683Z,1509701241.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:21.709Z,1509701241.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-03T09:27:21.710Z,1509701241.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:22.111Z,1509701242.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:22.127Z,1509701242.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-03T09:27:22.128Z,1509701242.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:22.512Z,1509701242.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:22.527Z,1509701242.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-03T09:27:22.528Z,1509701242.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:22.910Z,1509701242.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:22.934Z,1509701242.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-03T09:27:22.935Z,1509701242.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:23.288Z,1509701243.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:23.323Z,1509701243.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T09:27:23.328Z,1509701243.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:23.685Z,1509701243.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:23.699Z,1509701243.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T09:27:23.700Z,1509701243.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:24.089Z,1509701244.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:24.125Z,1509701244.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T09:27:24.126Z,1509701244.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:24.488Z,1509701244.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:24.531Z,1509701244.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T09:27:24.533Z,1509701244.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:24.905Z,1509701244.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:24.995Z,1509701244.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-03T09:27:24.996Z,1509701244.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:25.301Z,1509701245.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:25.337Z,1509701245.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T09:27:25.338Z,1509701245.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:25.705Z,1509701245.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:25.737Z,1509701245.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-03T09:27:25.738Z,1509701245.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:26.093Z,1509701246.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:26.139Z,1509701246.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-03T09:27:26.140Z,1509701246.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:26.496Z,1509701246.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:26.514Z,1509701246.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T09:27:26.515Z,1509701246.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:26.896Z,1509701246.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:26.947Z,1509701246.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-03T09:27:26.948Z,1509701246.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:27.295Z,1509701247.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:27.339Z,1509701247.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-03T09:27:27.340Z,1509701247.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:27.709Z,1509701247.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:27.741Z,1509701247.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-03T09:27:27.742Z,1509701247.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:28.105Z,1509701248.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:28.121Z,1509701248.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T09:27:28.122Z,1509701248.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:28.505Z,1509701248.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:28.523Z,1509701248.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T09:27:28.523Z,1509701248.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:28.900Z,1509701248.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:28.915Z,1509701248.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T09:27:28.916Z,1509701248.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:29.296Z,1509701249.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:29.310Z,1509701249.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T09:27:29.311Z,1509701249.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:29.701Z,1509701249.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:29.761Z,1509701249.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-03T09:27:29.762Z,1509701249.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:30.105Z,1509701250.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:30.123Z,1509701250.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T09:27:30.124Z,1509701250.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:30.501Z,1509701250.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:30.516Z,1509701250.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T09:27:30.518Z,1509701250.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:30.883Z,1509701250.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:30.917Z,1509701250.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T09:27:30.918Z,1509701250.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:31.298Z,1509701251.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:31.319Z,1509701251.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T09:27:31.320Z,1509701251.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:31.705Z,1509701251.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:31.720Z,1509701251.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T09:27:31.721Z,1509701251.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:32.108Z,1509701252.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:32.123Z,1509701252.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:32.508Z,1509701252.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:32.523Z,1509701252.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:32.896Z,1509701252.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:32.911Z,1509701252.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:33.281Z,1509701253.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:33.306Z,1509701253.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:33.698Z,1509701253.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:33.719Z,1509701253.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:34.125Z,1509701254.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:34.157Z,1509701254.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:34.494Z,1509701254.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:34.509Z,1509701254.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:34.909Z,1509701254.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:34.969Z,1509701254.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:35.308Z,1509701255.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:35.327Z,1509701255.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:35.708Z,1509701255.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:35.726Z,1509701255.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:36.095Z,1509701256.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:36.110Z,1509701256.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:36.499Z,1509701256.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:36.514Z,1509701256.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:36.900Z,1509701256.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:36.915Z,1509701256.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:37.299Z,1509701257.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:37.319Z,1509701257.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:37.708Z,1509701257.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:37.724Z,1509701257.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:38.108Z,1509701258.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:38.124Z,1509701258.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:38.508Z,1509701258.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:38.524Z,1509701258.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:38.899Z,1509701258.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:38.914Z,1509701258.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:39.298Z,1509701259.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:39.313Z,1509701259.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:39.700Z,1509701259.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:39.767Z,1509701259.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:40.099Z,1509701260.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:40.115Z,1509701260.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:40.499Z,1509701260.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:40.554Z,1509701260.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:40.909Z,1509701260.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:40.925Z,1509701260.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:41.310Z,1509701261.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:41.366Z,1509701261.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:41.714Z,1509701261.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:41.762Z,1509701261.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:42.099Z,1509701262.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:42.115Z,1509701262.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:42.496Z,1509701262.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:42.523Z,1509701262.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:42.900Z,1509701262.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:42.915Z,1509701262.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:43.299Z,1509701263.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:43.315Z,1509701263.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:43.708Z,1509701263.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:43.725Z,1509701263.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:44.112Z,1509701264.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:44.129Z,1509701264.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:44.509Z,1509701264.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:44.526Z,1509701264.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:44.897Z,1509701264.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:44.919Z,1509701264.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:45.300Z,1509701265.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:45.315Z,1509701265.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:45.709Z,1509701265.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:45.725Z,1509701265.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:46.109Z,1509701266.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:46.124Z,1509701266.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:46.512Z,1509701266.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:46.528Z,1509701266.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:46.884Z,1509701266.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:46.910Z,1509701266.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:47.296Z,1509701267.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:47.323Z,1509701267.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:47.700Z,1509701267.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:47.715Z,1509701267.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:48.083Z,1509701268.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:48.108Z,1509701268.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:48.496Z,1509701268.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:48.518Z,1509701268.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:48.912Z,1509701268.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:48.929Z,1509701268.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:49.312Z,1509701269.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:49.328Z,1509701269.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:49.709Z,1509701269.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:49.724Z,1509701269.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:50.100Z,1509701270.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:50.115Z,1509701270.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:50.499Z,1509701270.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:50.519Z,1509701270.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:50.897Z,1509701270.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:50.919Z,1509701270.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:51.300Z,1509701271.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:51.315Z,1509701271.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:51.709Z,1509701271.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:51.725Z,1509701271.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:52.109Z,1509701272.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:52.125Z,1509701272.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:52.509Z,1509701272.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:52.525Z,1509701272.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:52.899Z,1509701272.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:52.919Z,1509701272.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:53.297Z,1509701273.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:53.331Z,1509701273.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:53.710Z,1509701273.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:53.726Z,1509701273.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:54.113Z,1509701274.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:54.175Z,1509701274.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:54.509Z,1509701274.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:54.525Z,1509701274.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:54.890Z,1509701274.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:54.916Z,1509701274.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:55.291Z,1509701275.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:55.353Z,1509701275.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:55.710Z,1509701275.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:55.726Z,1509701275.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:56.114Z,1509701276.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:56.166Z,1509701276.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:56.510Z,1509701276.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:56.563Z,1509701276.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:56.890Z,1509701276.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:56.917Z,1509701276.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:57.292Z,1509701277.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:57.319Z,1509701277.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:57.710Z,1509701277.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:57.726Z,1509701277.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:58.111Z,1509701278.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:58.127Z,1509701278.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:58.514Z,1509701278.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:58.535Z,1509701278.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:58.889Z,1509701278.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:58.917Z,1509701278.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:59.290Z,1509701279.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:59.318Z,1509701279.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:27:59.715Z,1509701279.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:27:59.735Z,1509701279.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:00.114Z,1509701280.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:00.135Z,1509701280.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:00.511Z,1509701280.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:00.527Z,1509701280.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:00.892Z,1509701280.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:00.919Z,1509701280.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:01.291Z,1509701281.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:01.318Z,1509701281.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:01.710Z,1509701281.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:01.727Z,1509701281.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:02.114Z,1509701282.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:02.130Z,1509701282.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:02.510Z,1509701282.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:02.526Z,1509701282.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:02.889Z,1509701282.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:02.923Z,1509701282.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:03.291Z,1509701283.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:03.317Z,1509701283.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:03.709Z,1509701283.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:03.726Z,1509701283.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:04.113Z,1509701284.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:04.135Z,1509701284.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:04.512Z,1509701284.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:04.531Z,1509701284.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:04.891Z,1509701284.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:04.917Z,1509701284.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:05.288Z,1509701285.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:05.314Z,1509701285.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:05.713Z,1509701285.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:05.729Z,1509701285.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:06.103Z,1509701286.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:06.124Z,1509701286.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:06.509Z,1509701286.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:06.525Z,1509701286.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:06.889Z,1509701286.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:06.915Z,1509701286.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:07.291Z,1509701287.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:07.317Z,1509701287.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:07.708Z,1509701287.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:07.724Z,1509701287.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:08.113Z,1509701288.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:08.134Z,1509701288.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:08.505Z,1509701288.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:08.571Z,1509701288.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:08.891Z,1509701288.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:08.918Z,1509701288.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:09.291Z,1509701289.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:09.339Z,1509701289.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:09.709Z,1509701289.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:09.725Z,1509701289.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:10.109Z,1509701290.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:10.163Z,1509701290.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:10.513Z,1509701290.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:10.564Z,1509701290.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:10.885Z,1509701290.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:10.921Z,1509701290.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:11.288Z,1509701291.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:11.323Z,1509701291.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:11.714Z,1509701291.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:11.734Z,1509701291.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:12.097Z,1509701292.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:12.124Z,1509701292.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:12.501Z,1509701292.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:12.535Z,1509701292.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:12.891Z,1509701292.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:12.929Z,1509701292.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:13.291Z,1509701293.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:13.327Z,1509701293.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:13.701Z,1509701293.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:13.735Z,1509701293.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:14.114Z,1509701294.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:14.129Z,1509701294.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:14.501Z,1509701294.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:14.528Z,1509701294.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:14.889Z,1509701294.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:14.904Z,1509701294.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:15.291Z,1509701295.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:15.305Z,1509701295.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:15.701Z,1509701295.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:15.729Z,1509701295.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:16.101Z,1509701296.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:16.129Z,1509701296.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:16.501Z,1509701296.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:16.529Z,1509701296.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:16.890Z,1509701296.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:16.905Z,1509701296.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:17.291Z,1509701297.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:17.306Z,1509701297.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:17.701Z,1509701297.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:17.734Z,1509701297.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:18.106Z,1509701298.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:18.135Z,1509701298.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:18.516Z,1509701298.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:18.539Z,1509701298.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:18.892Z,1509701298.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:18.907Z,1509701298.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:22.123Z,1509701302.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:22.138Z,1509701302.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:22.280Z,1509701302.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:22.320Z,1509701302.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:22.684Z,1509701302.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:22.755Z,1509701302.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:23.084Z,1509701303.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:23.099Z,1509701303.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:23.483Z,1509701303.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:23.538Z,1509701303.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:23.879Z,1509701303.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:23.894Z,1509701303.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:24.272Z,1509701304.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:24.327Z,1509701304.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:24.684Z,1509701304.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:24.738Z,1509701304.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:25.084Z,1509701305.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:25.099Z,1509701305.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:25.484Z,1509701305.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:25.499Z,1509701305.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:25.877Z,1509701305.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:25.893Z,1509701305.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:26.271Z,1509701306.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:26.286Z,1509701306.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:26.684Z,1509701306.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:26.699Z,1509701306.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:27.084Z,1509701307.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:27.099Z,1509701307.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:27.485Z,1509701307.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:27.506Z,1509701307.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:27.880Z,1509701307.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:27.895Z,1509701307.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:28.276Z,1509701308.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:28.291Z,1509701308.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:28.684Z,1509701308.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:28.699Z,1509701308.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:29.083Z,1509701309.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:29.103Z,1509701309.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:29.484Z,1509701309.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:29.499Z,1509701309.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:29.880Z,1509701309.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:29.894Z,1509701309.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:30.278Z,1509701310.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:30.299Z,1509701310.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:30.683Z,1509701310.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:30.703Z,1509701310.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:31.084Z,1509701311.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:31.098Z,1509701311.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:31.484Z,1509701311.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:31.499Z,1509701311.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:31.876Z,1509701311.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:31.891Z,1509701311.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:32.279Z,1509701312.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:32.298Z,1509701312.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:32.686Z,1509701312.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:32.701Z,1509701312.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:33.084Z,1509701313.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:33.107Z,1509701313.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:33.484Z,1509701313.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:33.506Z,1509701313.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:33.878Z,1509701313.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:33.893Z,1509701313.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:34.279Z,1509701314.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:34.299Z,1509701314.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:34.685Z,1509701314.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:34.706Z,1509701314.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:35.084Z,1509701315.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:35.099Z,1509701315.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:35.484Z,1509701315.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:35.507Z,1509701315.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:35.881Z,1509701315.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:35.896Z,1509701315.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:36.277Z,1509701316.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:36.292Z,1509701316.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:36.684Z,1509701316.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:36.752Z,1509701316.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:37.085Z,1509701317.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:37.147Z,1509701317.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:37.484Z,1509701317.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:37.499Z,1509701317.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:37.878Z,1509701317.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:37.893Z,1509701317.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:38.281Z,1509701318.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:38.327Z,1509701318.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:38.684Z,1509701318.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:38.699Z,1509701318.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:39.088Z,1509701319.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:39.142Z,1509701319.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:39.487Z,1509701319.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:39.502Z,1509701319.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:39.869Z,1509701319.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:39.927Z,1509701319.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:40.268Z,1509701320.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:40.299Z,1509701320.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:40.694Z,1509701320.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:40.709Z,1509701320.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:41.089Z,1509701321.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:41.105Z,1509701321.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:41.487Z,1509701321.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:41.507Z,1509701321.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:41.871Z,1509701321.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:41.897Z,1509701321.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:42.268Z,1509701322.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:42.298Z,1509701322.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:42.687Z,1509701322.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:42.707Z,1509701322.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:43.086Z,1509701323.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:43.101Z,1509701323.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:43.489Z,1509701323.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:43.504Z,1509701323.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:43.871Z,1509701323.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:43.897Z,1509701323.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:44.271Z,1509701324.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:44.297Z,1509701324.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:44.689Z,1509701324.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:44.704Z,1509701324.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:45.087Z,1509701325.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:45.106Z,1509701325.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:45.486Z,1509701325.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:45.501Z,1509701325.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:45.869Z,1509701325.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:45.895Z,1509701325.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:46.268Z,1509701326.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:46.298Z,1509701326.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:46.686Z,1509701326.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:46.701Z,1509701326.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:47.089Z,1509701327.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:47.104Z,1509701327.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:47.489Z,1509701327.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:47.504Z,1509701327.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:47.871Z,1509701327.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:47.902Z,1509701327.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:48.271Z,1509701328.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:48.297Z,1509701328.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:48.689Z,1509701328.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:48.704Z,1509701328.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:49.085Z,1509701329.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:49.105Z,1509701329.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:49.489Z,1509701329.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:49.504Z,1509701329.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:49.871Z,1509701329.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:49.897Z,1509701329.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:50.271Z,1509701330.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:50.298Z,1509701330.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:50.689Z,1509701330.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:50.705Z,1509701330.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:51.089Z,1509701331.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:51.104Z,1509701331.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:51.494Z,1509701331.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:51.562Z,1509701331.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:51.873Z,1509701331.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:51.927Z,1509701331.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:52.269Z,1509701332.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:52.306Z,1509701332.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:52.682Z,1509701332.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:52.715Z,1509701332.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:53.094Z,1509701333.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:53.154Z,1509701333.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:53.482Z,1509701333.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:53.516Z,1509701333.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:53.871Z,1509701333.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:53.919Z,1509701333.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:54.268Z,1509701334.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:54.327Z,1509701334.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:54.681Z,1509701334.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:54.715Z,1509701334.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:55.097Z,1509701335.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:55.111Z,1509701335.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:55.482Z,1509701335.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:55.515Z,1509701335.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:55.870Z,1509701335.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:55.905Z,1509701335.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:56.269Z,1509701336.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:56.283Z,1509701336.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:56.681Z,1509701336.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:56.708Z,1509701336.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:57.085Z,1509701337.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:57.115Z,1509701337.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:57.482Z,1509701337.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:57.507Z,1509701337.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:57.869Z,1509701337.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:57.907Z,1509701337.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:58.268Z,1509701338.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:58.283Z,1509701338.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:58.682Z,1509701338.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:58.713Z,1509701338.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:59.081Z,1509701339.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:59.112Z,1509701339.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:59.481Z,1509701339.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:59.512Z,1509701339.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:28:59.868Z,1509701339.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:28:59.882Z,1509701339.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:00.267Z,1509701340.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:00.283Z,1509701340.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:00.685Z,1509701340.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:00.710Z,1509701340.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:01.081Z,1509701341.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:01.114Z,1509701341.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:01.481Z,1509701341.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:01.513Z,1509701341.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:01.872Z,1509701341.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:01.887Z,1509701341.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:02.271Z,1509701342.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:02.286Z,1509701342.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:02.681Z,1509701342.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:02.713Z,1509701342.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:03.085Z,1509701343.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:03.116Z,1509701343.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:03.485Z,1509701343.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:03.516Z,1509701343.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:03.872Z,1509701343.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:03.895Z,1509701343.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:04.274Z,1509701344.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:04.289Z,1509701344.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:04.685Z,1509701344.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:04.715Z,1509701344.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:05.085Z,1509701345.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:05.113Z,1509701345.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:05.486Z,1509701345.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:05.516Z,1509701345.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:05.609Z,1509701345.609 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:29:05.609Z,1509701345.609 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T09:29:05.872Z,1509701345.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:05.887Z,1509701345.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:06.004Z,1509701346.004 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:29:06.005Z,1509701346.005 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:29:06.005Z,1509701346.005 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:29:06.005Z,1509701346.005 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:29:06.272Z,1509701346.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:06.291Z,1509701346.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:06.685Z,1509701346.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:06.782Z,1509701346.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:07.085Z,1509701347.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:07.100Z,1509701347.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:07.482Z,1509701347.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:07.539Z,1509701347.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:07.877Z,1509701347.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:07.892Z,1509701347.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:08.278Z,1509701348.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:08.319Z,1509701348.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:08.680Z,1509701348.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:08.728Z,1509701348.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:09.081Z,1509701349.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:09.096Z,1509701349.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:09.484Z,1509701349.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:09.521Z,1509701349.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:09.879Z,1509701349.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:09.899Z,1509701349.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:10.127Z,1509701350.127 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:29:10.183Z,1509701350.183 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:29:10.184Z,1509701350.184 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:29:10.185Z,1509701350.185 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:29:10.186Z,1509701350.186 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:29:10.277Z,1509701350.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:10.299Z,1509701350.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:10.684Z,1509701350.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:10.701Z,1509701350.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:11.085Z,1509701351.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:11.100Z,1509701351.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:11.484Z,1509701351.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:11.499Z,1509701351.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:11.881Z,1509701351.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:11.897Z,1509701351.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:12.272Z,1509701352.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:12.288Z,1509701352.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:12.686Z,1509701352.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:12.706Z,1509701352.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:13.088Z,1509701353.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:13.104Z,1509701353.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:13.489Z,1509701353.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:13.504Z,1509701353.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:13.880Z,1509701353.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:13.895Z,1509701353.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:14.280Z,1509701354.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:14.295Z,1509701354.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:14.688Z,1509701354.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:14.704Z,1509701354.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:15.088Z,1509701355.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:15.104Z,1509701355.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:15.490Z,1509701355.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:15.505Z,1509701355.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:15.880Z,1509701355.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:15.903Z,1509701355.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:16.276Z,1509701356.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:16.291Z,1509701356.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:16.696Z,1509701356.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:16.727Z,1509701356.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:17.106Z,1509701357.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:17.161Z,1509701357.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:17.478Z,1509701357.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:17.499Z,1509701357.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:17.870Z,1509701357.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:17.916Z,1509701357.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:18.272Z,1509701358.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:18.300Z,1509701358.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:18.684Z,1509701358.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:18.700Z,1509701358.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:19.086Z,1509701359.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:19.101Z,1509701359.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:22.374Z,1509701362.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:22.455Z,1509701362.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:22.589Z,1509701362.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:22.605Z,1509701362.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:22.992Z,1509701362.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:23.042Z,1509701363.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:23.385Z,1509701363.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:23.400Z,1509701363.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:23.805Z,1509701363.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:23.855Z,1509701363.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:24.194Z,1509701364.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:24.209Z,1509701364.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:24.593Z,1509701364.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:24.639Z,1509701364.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:24.988Z,1509701364.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:25.004Z,1509701365.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:25.388Z,1509701365.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:25.404Z,1509701365.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:25.783Z,1509701365.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:25.800Z,1509701365.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:26.187Z,1509701366.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:26.204Z,1509701366.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:26.587Z,1509701366.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:26.608Z,1509701366.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:26.992Z,1509701366.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:27.008Z,1509701367.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:27.393Z,1509701367.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:27.409Z,1509701367.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:27.798Z,1509701367.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:27.837Z,1509701367.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:28.185Z,1509701368.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:28.200Z,1509701368.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:28.587Z,1509701368.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:28.607Z,1509701368.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:28.989Z,1509701368.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:29.003Z,1509701369.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:29.387Z,1509701369.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:29.407Z,1509701369.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:29.793Z,1509701369.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:29.809Z,1509701369.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:30.201Z,1509701370.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:30.217Z,1509701370.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:30.596Z,1509701370.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:30.615Z,1509701370.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:30.984Z,1509701370.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:30.999Z,1509701370.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:31.379Z,1509701371.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:31.402Z,1509701371.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:31.786Z,1509701371.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:31.807Z,1509701371.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:32.219Z,1509701372.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:32.262Z,1509701372.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:32.585Z,1509701372.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:32.600Z,1509701372.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:32.996Z,1509701372.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:33.012Z,1509701373.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:33.396Z,1509701373.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:33.411Z,1509701373.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:33.796Z,1509701373.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:33.818Z,1509701373.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:34.237Z,1509701374.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:34.263Z,1509701374.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:34.586Z,1509701374.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:34.607Z,1509701374.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:34.986Z,1509701374.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:35.002Z,1509701375.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:35.386Z,1509701375.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:35.407Z,1509701375.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:35.798Z,1509701375.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:35.813Z,1509701375.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:36.196Z,1509701376.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:36.212Z,1509701376.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:36.596Z,1509701376.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:36.679Z,1509701376.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:36.985Z,1509701376.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:37.001Z,1509701377.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:37.387Z,1509701377.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:37.427Z,1509701377.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:37.775Z,1509701377.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:37.801Z,1509701377.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:38.185Z,1509701378.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:38.243Z,1509701378.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:38.585Z,1509701378.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:38.642Z,1509701378.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:38.997Z,1509701378.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:39.012Z,1509701379.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:39.400Z,1509701379.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:39.423Z,1509701379.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:39.802Z,1509701379.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:39.823Z,1509701379.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:40.187Z,1509701380.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:40.207Z,1509701380.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:40.584Z,1509701380.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:40.607Z,1509701380.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:40.986Z,1509701380.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:41.001Z,1509701381.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:41.387Z,1509701381.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:41.407Z,1509701381.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:41.805Z,1509701381.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:41.827Z,1509701381.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:42.197Z,1509701382.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:42.213Z,1509701382.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:42.596Z,1509701382.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:42.612Z,1509701382.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:42.985Z,1509701382.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:43.004Z,1509701383.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:43.387Z,1509701383.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:43.402Z,1509701383.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:43.776Z,1509701383.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:43.802Z,1509701383.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:44.175Z,1509701384.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:44.206Z,1509701384.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:44.576Z,1509701384.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:44.603Z,1509701384.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:44.998Z,1509701384.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:45.013Z,1509701385.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:45.397Z,1509701385.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:45.413Z,1509701385.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:45.799Z,1509701385.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:45.819Z,1509701385.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:46.227Z,1509701386.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:46.267Z,1509701386.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:46.577Z,1509701386.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:46.607Z,1509701386.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:46.992Z,1509701386.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:47.007Z,1509701387.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:47.380Z,1509701387.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:47.406Z,1509701387.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:47.798Z,1509701387.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:47.814Z,1509701387.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:48.228Z,1509701388.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:48.265Z,1509701388.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:48.599Z,1509701388.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:48.619Z,1509701388.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:48.976Z,1509701388.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:49.004Z,1509701389.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:49.376Z,1509701389.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:49.403Z,1509701389.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:49.775Z,1509701389.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:49.802Z,1509701389.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:50.177Z,1509701390.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:50.212Z,1509701390.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:50.577Z,1509701390.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:50.635Z,1509701390.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:50.998Z,1509701390.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:51.055Z,1509701391.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:51.398Z,1509701391.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:51.414Z,1509701391.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:51.809Z,1509701391.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:51.826Z,1509701391.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:52.179Z,1509701392.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:52.230Z,1509701392.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:52.576Z,1509701392.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:52.607Z,1509701392.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:52.973Z,1509701392.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:53.014Z,1509701393.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:53.379Z,1509701393.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:53.431Z,1509701393.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:53.798Z,1509701393.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:53.819Z,1509701393.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:54.189Z,1509701394.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:54.216Z,1509701394.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:54.589Z,1509701394.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:54.623Z,1509701394.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:54.976Z,1509701394.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:55.014Z,1509701395.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:55.379Z,1509701395.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:55.414Z,1509701395.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:55.779Z,1509701395.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:55.811Z,1509701395.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:56.177Z,1509701396.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:56.193Z,1509701396.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:56.577Z,1509701396.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:56.592Z,1509701396.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:56.990Z,1509701396.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:57.013Z,1509701397.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:57.403Z,1509701397.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:57.418Z,1509701397.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:57.805Z,1509701397.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:57.833Z,1509701397.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:58.178Z,1509701398.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:58.201Z,1509701398.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:58.585Z,1509701398.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:58.601Z,1509701398.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:58.988Z,1509701398.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:59.003Z,1509701399.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:59.386Z,1509701399.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:59.401Z,1509701399.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:29:59.790Z,1509701399.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:29:59.805Z,1509701399.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:00.234Z,1509701400.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:00.288Z,1509701400.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:00.590Z,1509701400.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:00.605Z,1509701400.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:00.985Z,1509701400.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:01.001Z,1509701401.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:01.387Z,1509701401.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:01.402Z,1509701401.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:01.787Z,1509701401.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:01.811Z,1509701401.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:02.211Z,1509701402.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:02.269Z,1509701402.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:02.576Z,1509701402.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:02.605Z,1509701402.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:02.998Z,1509701402.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:03.019Z,1509701403.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:03.401Z,1509701403.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:03.423Z,1509701403.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:03.794Z,1509701403.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:03.810Z,1509701403.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:04.179Z,1509701404.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:04.205Z,1509701404.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:04.576Z,1509701404.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:04.603Z,1509701404.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:04.978Z,1509701404.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:05.005Z,1509701405.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:05.379Z,1509701405.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:05.459Z,1509701405.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:05.794Z,1509701405.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:05.809Z,1509701405.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:06.198Z,1509701406.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:06.213Z,1509701406.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:06.594Z,1509701406.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:06.648Z,1509701406.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:06.976Z,1509701406.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:07.010Z,1509701407.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:07.372Z,1509701407.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:07.419Z,1509701407.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:07.775Z,1509701407.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:07.827Z,1509701407.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:08.180Z,1509701408.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:08.205Z,1509701408.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:08.576Z,1509701408.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:08.607Z,1509701408.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:08.997Z,1509701408.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:09.012Z,1509701409.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:09.395Z,1509701409.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:09.415Z,1509701409.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:09.807Z,1509701409.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:09.823Z,1509701409.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:10.179Z,1509701410.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:10.205Z,1509701410.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:10.576Z,1509701410.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:10.607Z,1509701410.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:10.977Z,1509701410.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:11.006Z,1509701411.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:11.379Z,1509701411.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:11.405Z,1509701411.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:11.795Z,1509701411.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:11.815Z,1509701411.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:12.195Z,1509701412.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:12.215Z,1509701412.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:12.597Z,1509701412.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:12.612Z,1509701412.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:12.612Z,1509701412.612 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 185
2017-11-03T09:30:12.612Z,1509701412.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:30:12.614Z,1509701412.614 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:12.614Z,1509701412.614 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 185
2017-11-03T09:30:12.614Z,1509701412.614 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:30:12.617Z,1509701412.617 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:12.617Z,1509701412.617 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 185
2017-11-03T09:30:12.617Z,1509701412.617 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:30:12.693Z,1509701412.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:30:12.693Z,1509701412.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:30:12.693Z,1509701412.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:30:12.987Z,1509701412.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:13.096Z,1509701413.096 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:30:13.097Z,1509701413.097 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 185
2017-11-03T09:30:13.097Z,1509701413.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:30:13.097Z,1509701413.097 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 185
2017-11-03T09:30:13.098Z,1509701413.098 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:30:13.098Z,1509701413.098 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 185
2017-11-03T09:30:13.375Z,1509701413.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:13.401Z,1509701413.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:30:13.402Z,1509701413.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:30:13.402Z,1509701413.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:30:13.403Z,1509701413.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:30:13.403Z,1509701413.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:30:13.403Z,1509701413.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:30:13.404Z,1509701413.404 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:30:13.404Z,1509701413.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:30:13.409Z,1509701413.409 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:30:13.779Z,1509701413.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:13.814Z,1509701413.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:14.214Z,1509701414.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:14.249Z,1509701414.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:14.579Z,1509701414.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:14.606Z,1509701414.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:15.003Z,1509701415.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:15.018Z,1509701415.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:15.398Z,1509701415.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:15.413Z,1509701415.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:15.801Z,1509701415.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:15.816Z,1509701415.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:16.222Z,1509701416.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:16.267Z,1509701416.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:16.579Z,1509701416.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:16.603Z,1509701416.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:16.978Z,1509701416.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:16.993Z,1509701416.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:17.376Z,1509701417.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:17.391Z,1509701417.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:17.807Z,1509701417.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:17.827Z,1509701417.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:18.193Z,1509701418.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:18.223Z,1509701418.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:18.594Z,1509701418.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:18.623Z,1509701418.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:18.977Z,1509701418.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:18.993Z,1509701418.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:19.379Z,1509701419.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:19.395Z,1509701419.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:22.591Z,1509701422.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:22.687Z,1509701422.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:22.823Z,1509701422.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:22.844Z,1509701422.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:23.234Z,1509701423.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:23.249Z,1509701423.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:23.631Z,1509701423.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:23.736Z,1509701423.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:24.033Z,1509701424.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:24.055Z,1509701424.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:24.427Z,1509701424.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:24.479Z,1509701424.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:24.827Z,1509701424.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:24.886Z,1509701424.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:25.225Z,1509701425.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:25.247Z,1509701425.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:25.625Z,1509701425.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:25.640Z,1509701425.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:26.034Z,1509701426.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:26.050Z,1509701426.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:26.435Z,1509701426.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:26.451Z,1509701426.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:26.835Z,1509701426.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:26.850Z,1509701426.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:27.220Z,1509701427.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:27.236Z,1509701427.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:27.613Z,1509701427.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:27.651Z,1509701427.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:28.018Z,1509701428.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:28.025Z,1509701428.025 [PNI_TCM](ERROR): CRC does not match. Expected:0x23285 got:0x28137
2017-11-03T09:30:28.051Z,1509701428.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:28.414Z,1509701428.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:28.430Z,1509701428.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:28.822Z,1509701428.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:28.843Z,1509701428.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:29.241Z,1509701429.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:29.266Z,1509701429.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:29.627Z,1509701429.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:29.643Z,1509701429.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:30.023Z,1509701430.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:30.039Z,1509701430.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:30.419Z,1509701430.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:30.434Z,1509701430.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:30.823Z,1509701430.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:30.843Z,1509701430.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:31.225Z,1509701431.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:31.241Z,1509701431.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:31.662Z,1509701431.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:31.712Z,1509701431.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:32.034Z,1509701432.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:32.049Z,1509701432.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:32.428Z,1509701432.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:32.456Z,1509701432.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:32.826Z,1509701432.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:32.855Z,1509701432.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:33.216Z,1509701433.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:33.231Z,1509701433.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:33.623Z,1509701433.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:33.698Z,1509701433.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:34.017Z,1509701434.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:34.034Z,1509701434.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:34.422Z,1509701434.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:34.438Z,1509701434.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:34.834Z,1509701434.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:34.857Z,1509701434.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:35.229Z,1509701435.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:35.261Z,1509701435.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:35.668Z,1509701435.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:35.709Z,1509701435.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:36.018Z,1509701436.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:36.034Z,1509701436.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:36.420Z,1509701436.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:36.474Z,1509701436.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:36.819Z,1509701436.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:36.835Z,1509701436.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:37.222Z,1509701437.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:37.282Z,1509701437.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:37.623Z,1509701437.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:37.638Z,1509701437.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:38.026Z,1509701438.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:38.047Z,1509701438.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:38.436Z,1509701438.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:38.498Z,1509701438.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:38.828Z,1509701438.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:38.853Z,1509701438.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:39.215Z,1509701439.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:39.263Z,1509701439.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:39.620Z,1509701439.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:39.671Z,1509701439.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:40.028Z,1509701440.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:40.053Z,1509701440.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:40.421Z,1509701440.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:40.451Z,1509701440.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:40.834Z,1509701440.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:40.855Z,1509701440.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:41.236Z,1509701441.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:41.251Z,1509701441.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:41.634Z,1509701441.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:41.649Z,1509701441.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:42.020Z,1509701442.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:42.043Z,1509701442.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:42.422Z,1509701442.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:42.450Z,1509701442.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:42.848Z,1509701442.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:42.863Z,1509701442.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:43.213Z,1509701443.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:43.241Z,1509701443.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:43.641Z,1509701443.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:43.656Z,1509701443.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:44.023Z,1509701444.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:44.057Z,1509701444.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:44.442Z,1509701444.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:44.457Z,1509701444.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:44.813Z,1509701444.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:44.841Z,1509701444.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:45.215Z,1509701445.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:45.255Z,1509701445.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:45.666Z,1509701445.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:45.685Z,1509701445.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x21447 got:0x58375
2017-11-03T09:30:45.717Z,1509701445.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:46.029Z,1509701446.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:46.056Z,1509701446.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:46.425Z,1509701446.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:46.459Z,1509701446.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:46.828Z,1509701446.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:46.859Z,1509701446.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:47.220Z,1509701447.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:47.255Z,1509701447.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:47.630Z,1509701447.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:47.701Z,1509701447.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:48.018Z,1509701448.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:48.050Z,1509701448.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:48.415Z,1509701448.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:48.462Z,1509701448.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:48.826Z,1509701448.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:48.833Z,1509701448.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x37840 got:0x17671
2017-11-03T09:30:48.863Z,1509701448.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:49.230Z,1509701449.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:49.254Z,1509701449.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:49.690Z,1509701449.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:49.739Z,1509701449.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:50.027Z,1509701450.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:50.047Z,1509701450.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:50.427Z,1509701450.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:50.447Z,1509701450.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:50.825Z,1509701450.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:50.842Z,1509701450.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:51.221Z,1509701451.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:51.238Z,1509701451.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:51.623Z,1509701451.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:51.734Z,1509701451.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:52.034Z,1509701452.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:52.050Z,1509701452.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:52.429Z,1509701452.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:52.444Z,1509701452.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:52.832Z,1509701452.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:52.847Z,1509701452.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:53.225Z,1509701453.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:53.241Z,1509701453.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:53.614Z,1509701453.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:53.637Z,1509701453.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:54.023Z,1509701454.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:54.038Z,1509701454.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:54.424Z,1509701454.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:54.439Z,1509701454.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:54.833Z,1509701454.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:54.842Z,1509701454.842 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:30:54.842Z,1509701454.842 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:30:54.842Z,1509701454.842 [BPC1](ERROR): Communications Fault
2017-11-03T09:30:54.859Z,1509701454.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:54.953Z,1509701454.953 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:30:55.236Z,1509701455.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:55.251Z,1509701455.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:55.637Z,1509701455.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:55.652Z,1509701455.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:56.023Z,1509701456.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:56.043Z,1509701456.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:56.121Z,1509701456.121 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:30:56.121Z,1509701456.121 [BPC1] No Fault, FailCount= 1
2017-11-03T09:30:56.411Z,1509701456.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:56.492Z,1509701456.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:56.822Z,1509701456.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:56.833Z,1509701456.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x3259 got:0x30471
2017-11-03T09:30:56.859Z,1509701456.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:57.226Z,1509701457.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:57.241Z,1509701457.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:57.612Z,1509701457.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:57.638Z,1509701457.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:58.038Z,1509701458.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:58.054Z,1509701458.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:58.434Z,1509701458.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:58.450Z,1509701458.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:58.837Z,1509701458.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:58.859Z,1509701458.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:59.224Z,1509701459.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:59.240Z,1509701459.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:30:59.636Z,1509701459.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:30:59.715Z,1509701459.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:00.026Z,1509701460.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:00.046Z,1509701460.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:00.410Z,1509701460.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:00.443Z,1509701460.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:00.834Z,1509701460.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:00.894Z,1509701460.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:01.235Z,1509701461.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:01.260Z,1509701461.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:01.684Z,1509701461.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:01.708Z,1509701461.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:02.022Z,1509701462.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:02.066Z,1509701462.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:02.417Z,1509701462.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:02.466Z,1509701462.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:02.831Z,1509701462.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:02.873Z,1509701462.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:03.226Z,1509701463.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:03.267Z,1509701463.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:03.637Z,1509701463.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:03.709Z,1509701463.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:04.035Z,1509701464.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:04.079Z,1509701464.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:04.431Z,1509701464.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:04.470Z,1509701464.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:04.826Z,1509701464.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:04.848Z,1509701464.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:05.219Z,1509701465.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:05.282Z,1509701465.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:05.623Z,1509701465.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:05.643Z,1509701465.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:06.034Z,1509701466.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:06.063Z,1509701466.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:06.450Z,1509701466.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:06.500Z,1509701466.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:06.597Z,1509701466.597 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:31:06.597Z,1509701466.597 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T09:31:06.597Z,1509701466.597 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:31:06.627Z,1509701466.627 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:31:06.837Z,1509701466.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:06.886Z,1509701466.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:31:06.887Z,1509701466.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:07.001Z,1509701467.001 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:31:07.235Z,1509701467.235 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:31:07.258Z,1509701467.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:07.339Z,1509701467.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:31:07.340Z,1509701467.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:07.644Z,1509701467.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:07.681Z,1509701467.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:31:07.683Z,1509701467.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:08.025Z,1509701468.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:08.050Z,1509701468.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-03T09:31:08.051Z,1509701468.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:08.440Z,1509701468.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:08.489Z,1509701468.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:31:08.490Z,1509701468.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:08.577Z,1509701468.577 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:31:08.577Z,1509701468.577 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T09:31:08.815Z,1509701468.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:08.849Z,1509701468.849 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:31:08.849Z,1509701468.849 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:31:08.849Z,1509701468.849 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:31:08.849Z,1509701468.849 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:31:08.879Z,1509701468.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:31:08.880Z,1509701468.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:09.225Z,1509701469.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:09.255Z,1509701469.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:31:09.261Z,1509701469.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:09.650Z,1509701469.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:09.701Z,1509701469.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:31:09.703Z,1509701469.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:10.036Z,1509701470.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:10.056Z,1509701470.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:31:10.057Z,1509701470.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:10.432Z,1509701470.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:10.480Z,1509701470.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:31:10.502Z,1509701470.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:10.825Z,1509701470.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:10.877Z,1509701470.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:31:10.878Z,1509701470.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:11.215Z,1509701471.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:11.259Z,1509701471.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:31:11.260Z,1509701471.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:11.615Z,1509701471.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:11.695Z,1509701471.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:31:11.696Z,1509701471.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:12.022Z,1509701472.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:12.062Z,1509701472.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:31:12.063Z,1509701472.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:12.423Z,1509701472.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:12.486Z,1509701472.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:31:12.487Z,1509701472.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:12.836Z,1509701472.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:12.883Z,1509701472.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:31:12.884Z,1509701472.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:13.134Z,1509701473.134 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:31:13.285Z,1509701473.285 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:31:13.286Z,1509701473.286 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:31:13.286Z,1509701473.286 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:31:13.287Z,1509701473.287 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:31:13.298Z,1509701473.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:13.379Z,1509701473.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T09:31:13.381Z,1509701473.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:13.635Z,1509701473.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:13.683Z,1509701473.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:31:13.690Z,1509701473.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:14.052Z,1509701474.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:14.140Z,1509701474.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:14.447Z,1509701474.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:14.498Z,1509701474.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:14.838Z,1509701474.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:14.887Z,1509701474.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:15.223Z,1509701475.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:15.266Z,1509701475.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:15.621Z,1509701475.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:15.667Z,1509701475.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:16.038Z,1509701476.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:16.091Z,1509701476.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:16.435Z,1509701476.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:16.459Z,1509701476.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:16.823Z,1509701476.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:16.862Z,1509701476.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:17.214Z,1509701477.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:17.298Z,1509701477.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:17.641Z,1509701477.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:17.670Z,1509701477.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:18.038Z,1509701478.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:18.062Z,1509701478.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:18.413Z,1509701478.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:18.489Z,1509701478.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:18.826Z,1509701478.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:18.861Z,1509701478.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:19.252Z,1509701479.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:19.296Z,1509701479.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:19.643Z,1509701479.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:19.663Z,1509701479.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:22.943Z,1509701482.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:22.959Z,1509701482.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:23.092Z,1509701483.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:23.127Z,1509701483.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:23.498Z,1509701483.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:23.519Z,1509701483.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:23.901Z,1509701483.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:23.916Z,1509701483.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:24.300Z,1509701484.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:24.316Z,1509701484.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:24.686Z,1509701484.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:24.701Z,1509701484.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:25.088Z,1509701485.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:25.147Z,1509701485.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:25.477Z,1509701485.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:25.502Z,1509701485.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:25.897Z,1509701485.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:25.913Z,1509701485.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:26.301Z,1509701486.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:26.362Z,1509701486.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:26.698Z,1509701486.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:26.719Z,1509701486.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:27.073Z,1509701487.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:27.108Z,1509701487.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:27.479Z,1509701487.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:27.545Z,1509701487.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:27.884Z,1509701487.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:27.899Z,1509701487.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:28.279Z,1509701488.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:28.334Z,1509701488.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:28.689Z,1509701488.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:28.743Z,1509701488.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:29.089Z,1509701489.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:29.125Z,1509701489.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:29.493Z,1509701489.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:29.525Z,1509701489.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:29.884Z,1509701489.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:29.927Z,1509701489.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:30.279Z,1509701490.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:30.299Z,1509701490.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:30.693Z,1509701490.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:30.726Z,1509701490.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:31.097Z,1509701491.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:31.127Z,1509701491.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:31.488Z,1509701491.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:31.523Z,1509701491.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:31.884Z,1509701491.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:31.899Z,1509701491.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:32.283Z,1509701492.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:32.299Z,1509701492.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:32.693Z,1509701492.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:32.725Z,1509701492.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:33.089Z,1509701493.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:33.104Z,1509701493.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:33.490Z,1509701493.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:33.521Z,1509701493.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:33.940Z,1509701493.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:33.973Z,1509701493.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:34.282Z,1509701494.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:34.297Z,1509701494.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:34.685Z,1509701494.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:34.701Z,1509701494.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:35.093Z,1509701495.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:35.108Z,1509701495.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:35.493Z,1509701495.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:35.526Z,1509701495.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:35.881Z,1509701495.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:35.896Z,1509701495.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:36.284Z,1509701496.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:36.314Z,1509701496.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:36.693Z,1509701496.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:36.726Z,1509701496.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:37.097Z,1509701497.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:37.125Z,1509701497.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:37.489Z,1509701497.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:37.505Z,1509701497.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:37.884Z,1509701497.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:37.899Z,1509701497.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:38.289Z,1509701498.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:38.304Z,1509701498.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:38.698Z,1509701498.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:38.726Z,1509701498.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:39.097Z,1509701499.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:39.127Z,1509701499.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:39.498Z,1509701499.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:39.506Z,1509701499.506 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T09:31:39.506Z,1509701499.506 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:31:39.506Z,1509701499.506 [BPC1](ERROR): Data Fault
2017-11-03T09:31:39.535Z,1509701499.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:39.652Z,1509701499.652 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:31:39.883Z,1509701499.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:39.902Z,1509701499.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:40.285Z,1509701500.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:40.300Z,1509701500.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:40.693Z,1509701500.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:40.709Z,1509701500.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:40.804Z,1509701500.804 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:31:40.805Z,1509701500.805 [BPC1] No Fault, FailCount= 1
2017-11-03T09:31:41.093Z,1509701501.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:41.159Z,1509701501.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:41.488Z,1509701501.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:41.528Z,1509701501.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:41.883Z,1509701501.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:41.898Z,1509701501.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:42.284Z,1509701502.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:42.299Z,1509701502.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:42.693Z,1509701502.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:42.708Z,1509701502.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:43.090Z,1509701503.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:43.105Z,1509701503.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:43.489Z,1509701503.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:43.510Z,1509701503.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:43.884Z,1509701503.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:43.907Z,1509701503.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:44.284Z,1509701504.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:44.299Z,1509701504.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:44.688Z,1509701504.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:44.711Z,1509701504.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:45.088Z,1509701505.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:45.103Z,1509701505.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:45.490Z,1509701505.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:45.505Z,1509701505.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:45.883Z,1509701505.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:45.898Z,1509701505.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:46.287Z,1509701506.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:46.306Z,1509701506.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:46.690Z,1509701506.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:46.705Z,1509701506.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:47.091Z,1509701507.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:47.136Z,1509701507.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:47.493Z,1509701507.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:47.508Z,1509701507.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:47.935Z,1509701507.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:47.979Z,1509701507.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:48.284Z,1509701508.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:48.300Z,1509701508.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:48.693Z,1509701508.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:48.715Z,1509701508.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:49.092Z,1509701509.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:49.111Z,1509701509.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:49.492Z,1509701509.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:49.508Z,1509701509.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:49.887Z,1509701509.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:49.907Z,1509701509.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:50.294Z,1509701510.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:50.309Z,1509701510.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:50.693Z,1509701510.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:50.709Z,1509701510.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:51.093Z,1509701511.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:51.108Z,1509701511.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:51.494Z,1509701511.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:51.509Z,1509701511.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:51.887Z,1509701511.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:51.895Z,1509701511.895 [BPC1](ERROR): Failed to parse message.
2017-11-03T09:31:51.895Z,1509701511.895 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T09:31:51.895Z,1509701511.895 [BPC1] Data Fault, FailCount= 2
2017-11-03T09:31:51.895Z,1509701511.895 [BPC1](ERROR): Data Fault
2017-11-03T09:31:51.903Z,1509701511.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:51.981Z,1509701511.981 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:31:52.298Z,1509701512.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:52.314Z,1509701512.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:52.697Z,1509701512.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:52.719Z,1509701512.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:53.097Z,1509701513.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:53.119Z,1509701513.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:53.221Z,1509701513.221 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:31:53.221Z,1509701513.221 [BPC1] No Fault, FailCount= 2
2017-11-03T09:31:53.499Z,1509701513.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:53.567Z,1509701513.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:53.888Z,1509701513.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:53.905Z,1509701513.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:54.285Z,1509701514.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:54.342Z,1509701514.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:54.698Z,1509701514.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:54.719Z,1509701514.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:55.096Z,1509701515.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:55.113Z,1509701515.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:55.496Z,1509701515.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:55.513Z,1509701515.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:55.894Z,1509701515.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:55.909Z,1509701515.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:56.281Z,1509701516.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:56.301Z,1509701516.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:56.696Z,1509701516.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:56.712Z,1509701516.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:57.098Z,1509701517.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:57.113Z,1509701517.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:57.205Z,1509701517.205 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T09:31:57.494Z,1509701517.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:57.509Z,1509701517.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:57.885Z,1509701517.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:57.907Z,1509701517.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:58.291Z,1509701518.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:58.311Z,1509701518.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:58.697Z,1509701518.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:58.719Z,1509701518.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:59.096Z,1509701519.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:59.112Z,1509701519.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:59.497Z,1509701519.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:59.512Z,1509701519.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:31:59.881Z,1509701519.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:31:59.903Z,1509701519.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:00.284Z,1509701520.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:00.300Z,1509701520.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:00.697Z,1509701520.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:00.713Z,1509701520.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:01.096Z,1509701521.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:01.112Z,1509701521.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:01.497Z,1509701521.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:01.512Z,1509701521.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:01.938Z,1509701521.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:01.978Z,1509701521.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:02.279Z,1509701522.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:02.305Z,1509701522.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:02.697Z,1509701522.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:02.713Z,1509701522.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:03.093Z,1509701523.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:03.119Z,1509701523.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:03.494Z,1509701523.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:03.509Z,1509701523.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:03.878Z,1509701523.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:03.914Z,1509701523.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:04.282Z,1509701524.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:04.310Z,1509701524.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:04.689Z,1509701524.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:04.743Z,1509701524.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:05.089Z,1509701525.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:05.139Z,1509701525.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:05.505Z,1509701525.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:05.520Z,1509701525.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:05.877Z,1509701525.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:05.893Z,1509701525.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:06.286Z,1509701526.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:06.335Z,1509701526.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:06.690Z,1509701526.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:06.715Z,1509701526.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:07.090Z,1509701527.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:07.147Z,1509701527.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:07.494Z,1509701527.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:07.562Z,1509701527.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:07.881Z,1509701527.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:07.920Z,1509701527.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:08.276Z,1509701528.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:08.291Z,1509701528.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:08.689Z,1509701528.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:08.721Z,1509701528.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:09.089Z,1509701529.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:09.122Z,1509701529.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:09.489Z,1509701529.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:09.525Z,1509701529.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:09.885Z,1509701529.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:09.900Z,1509701529.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:10.283Z,1509701530.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:10.299Z,1509701530.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:10.689Z,1509701530.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:10.721Z,1509701530.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:11.093Z,1509701531.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:11.125Z,1509701531.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:11.497Z,1509701531.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:11.527Z,1509701531.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:11.883Z,1509701531.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:11.898Z,1509701531.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:12.282Z,1509701532.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:12.301Z,1509701532.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:12.688Z,1509701532.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:12.703Z,1509701532.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:13.086Z,1509701533.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:13.101Z,1509701533.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:13.489Z,1509701533.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:13.505Z,1509701533.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:13.892Z,1509701533.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:13.907Z,1509701533.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:14.283Z,1509701534.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:14.303Z,1509701534.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:14.697Z,1509701534.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:14.727Z,1509701534.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:15.085Z,1509701535.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:15.106Z,1509701535.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:15.498Z,1509701535.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:15.527Z,1509701535.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:15.930Z,1509701535.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:15.962Z,1509701535.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:16.277Z,1509701536.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:16.305Z,1509701536.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:16.686Z,1509701536.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:16.711Z,1509701536.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:17.091Z,1509701537.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:17.117Z,1509701537.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:17.490Z,1509701537.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:17.516Z,1509701537.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:17.880Z,1509701537.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:17.914Z,1509701537.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:18.279Z,1509701538.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:18.366Z,1509701538.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:18.690Z,1509701538.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:18.717Z,1509701538.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:18.720Z,1509701538.720 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T09:32:18.720Z,1509701538.720 [Default:CheckIn:C.Wait] Stopped
2017-11-03T09:32:18.720Z,1509701538.720 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T09:32:18.720Z,1509701538.720 [Default:CheckIn:D] Running Loop=1
2017-11-03T09:32:19.086Z,1509701539.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:19.131Z,1509701539.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:19.134Z,1509701539.134 [Default:CheckIn:D] Stopped
2017-11-03T09:32:19.134Z,1509701539.134 [Default:CheckIn:E] Running Loop=1
2017-11-03T09:32:19.490Z,1509701539.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:19.515Z,1509701539.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:19.519Z,1509701539.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 557.192773 min 
2017-11-03T09:32:19.519Z,1509701539.519 [Default:CheckIn:E] Stopped
2017-11-03T09:32:19.519Z,1509701539.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T09:32:19.519Z,1509701539.519 [Default:CheckIn] Stopped
2017-11-03T09:32:19.519Z,1509701539.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T09:32:19.520Z,1509701539.520 [Default:CheckIn](INFO): Running loop #55
2017-11-03T09:32:19.520Z,1509701539.520 [Default:CheckIn] Running Loop=55
2017-11-03T09:32:19.520Z,1509701539.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T09:32:19.520Z,1509701539.520 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T09:32:19.888Z,1509701539.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:19.939Z,1509701539.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:23.086Z,1509701543.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:23.135Z,1509701543.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:23.277Z,1509701543.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:23.293Z,1509701543.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:23.716Z,1509701543.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:23.749Z,1509701543.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:24.072Z,1509701544.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:24.088Z,1509701544.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:24.462Z,1509701544.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:24.483Z,1509701544.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:24.864Z,1509701544.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:24.879Z,1509701544.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:25.257Z,1509701545.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:25.278Z,1509701545.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:25.729Z,1509701545.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:25.747Z,1509701545.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:26.072Z,1509701546.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:26.088Z,1509701546.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:26.472Z,1509701546.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:26.488Z,1509701546.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:26.861Z,1509701546.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:26.877Z,1509701546.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:27.263Z,1509701547.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:27.278Z,1509701547.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:27.683Z,1509701547.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:27.743Z,1509701547.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:28.073Z,1509701548.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:28.091Z,1509701548.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:28.473Z,1509701548.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:28.495Z,1509701548.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:28.863Z,1509701548.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:28.883Z,1509701548.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:29.260Z,1509701549.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:29.283Z,1509701549.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:29.673Z,1509701549.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:29.689Z,1509701549.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:30.073Z,1509701550.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:30.095Z,1509701550.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:30.472Z,1509701550.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:30.488Z,1509701550.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:30.862Z,1509701550.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:30.877Z,1509701550.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:31.261Z,1509701551.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:31.277Z,1509701551.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:31.673Z,1509701551.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:31.695Z,1509701551.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:32.074Z,1509701552.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:32.139Z,1509701552.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:32.473Z,1509701552.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:32.495Z,1509701552.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:32.853Z,1509701552.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:32.880Z,1509701552.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:33.253Z,1509701553.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:33.272Z,1509701553.272 [BPC1](ERROR): Failed to parse message.
2017-11-03T09:32:33.272Z,1509701553.272 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T09:32:33.273Z,1509701553.273 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:32:33.273Z,1509701553.273 [BPC1](ERROR): Data Fault
2017-11-03T09:32:33.281Z,1509701553.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:33.365Z,1509701553.365 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:32:33.671Z,1509701553.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:33.691Z,1509701553.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:34.077Z,1509701554.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:34.099Z,1509701554.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:34.474Z,1509701554.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:34.490Z,1509701554.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:34.581Z,1509701554.581 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:32:34.581Z,1509701554.581 [BPC1] No Fault, FailCount= 1
2017-11-03T09:32:34.850Z,1509701554.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:34.934Z,1509701554.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:35.252Z,1509701555.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:35.290Z,1509701555.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:35.709Z,1509701555.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:35.773Z,1509701555.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:36.061Z,1509701556.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:36.088Z,1509701556.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:36.473Z,1509701556.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:36.489Z,1509701556.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:36.854Z,1509701556.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:36.886Z,1509701556.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:37.252Z,1509701557.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:37.267Z,1509701557.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:37.695Z,1509701557.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:37.711Z,1509701557.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:38.065Z,1509701558.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:38.097Z,1509701558.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:38.465Z,1509701558.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:38.496Z,1509701558.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:38.856Z,1509701558.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:38.871Z,1509701558.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:39.255Z,1509701559.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:39.270Z,1509701559.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:39.706Z,1509701559.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:39.728Z,1509701559.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:40.065Z,1509701560.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:40.081Z,1509701560.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:40.465Z,1509701560.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:40.481Z,1509701560.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:40.860Z,1509701560.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:40.876Z,1509701560.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:41.258Z,1509701561.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:41.277Z,1509701561.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:41.715Z,1509701561.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:41.762Z,1509701561.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:42.073Z,1509701562.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:42.103Z,1509701562.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:42.466Z,1509701562.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:42.481Z,1509701562.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:42.861Z,1509701562.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:42.876Z,1509701562.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:43.260Z,1509701563.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:43.275Z,1509701563.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:43.673Z,1509701563.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:43.703Z,1509701563.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:44.073Z,1509701564.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:44.105Z,1509701564.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:44.466Z,1509701564.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:44.481Z,1509701564.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:44.861Z,1509701564.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:44.876Z,1509701564.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:45.261Z,1509701565.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:45.277Z,1509701565.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:45.674Z,1509701565.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:45.703Z,1509701565.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:46.066Z,1509701566.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:46.115Z,1509701566.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:46.466Z,1509701566.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:46.523Z,1509701566.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:46.861Z,1509701566.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:46.883Z,1509701566.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:47.262Z,1509701567.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:47.323Z,1509701567.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:47.672Z,1509701567.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:47.695Z,1509701567.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:48.069Z,1509701568.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:48.123Z,1509701568.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:48.467Z,1509701568.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:48.523Z,1509701568.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:48.850Z,1509701568.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:48.875Z,1509701568.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:49.255Z,1509701569.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:49.281Z,1509701569.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:49.690Z,1509701569.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:49.741Z,1509701569.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:50.073Z,1509701570.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:50.088Z,1509701570.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:50.474Z,1509701570.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:50.489Z,1509701570.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:50.853Z,1509701570.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:50.887Z,1509701570.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:51.252Z,1509701571.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:51.278Z,1509701571.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:51.702Z,1509701571.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:51.734Z,1509701571.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:52.077Z,1509701572.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:52.093Z,1509701572.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:52.474Z,1509701572.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:52.489Z,1509701572.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:52.866Z,1509701572.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:52.882Z,1509701572.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:53.253Z,1509701573.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:53.287Z,1509701573.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:53.700Z,1509701573.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:53.747Z,1509701573.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:54.071Z,1509701574.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:54.086Z,1509701574.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:54.474Z,1509701574.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:54.489Z,1509701574.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:54.855Z,1509701574.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:54.882Z,1509701574.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:55.255Z,1509701575.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:55.287Z,1509701575.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:55.707Z,1509701575.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:55.774Z,1509701575.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:56.074Z,1509701576.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:56.095Z,1509701576.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:56.472Z,1509701576.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:56.489Z,1509701576.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:56.853Z,1509701576.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:56.879Z,1509701576.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:57.253Z,1509701577.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:57.282Z,1509701577.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:57.673Z,1509701577.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:57.688Z,1509701577.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:58.074Z,1509701578.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:58.089Z,1509701578.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:58.474Z,1509701578.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:58.490Z,1509701578.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:58.853Z,1509701578.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:58.954Z,1509701578.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:59.252Z,1509701579.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:59.286Z,1509701579.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:32:59.678Z,1509701579.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:32:59.738Z,1509701579.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:00.074Z,1509701580.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:00.089Z,1509701580.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:00.481Z,1509701580.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:00.537Z,1509701580.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:00.854Z,1509701580.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:00.907Z,1509701580.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:01.255Z,1509701581.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:01.290Z,1509701581.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:01.666Z,1509701581.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:01.693Z,1509701581.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:02.066Z,1509701582.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:02.106Z,1509701582.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:02.458Z,1509701582.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:02.493Z,1509701582.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:02.858Z,1509701582.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:02.882Z,1509701582.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:03.251Z,1509701583.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:03.267Z,1509701583.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:03.714Z,1509701583.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:03.750Z,1509701583.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:04.069Z,1509701584.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:04.099Z,1509701584.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:04.470Z,1509701584.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:04.495Z,1509701584.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:04.860Z,1509701584.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:04.899Z,1509701584.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:05.256Z,1509701585.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:05.271Z,1509701585.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:05.718Z,1509701585.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:05.763Z,1509701585.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:06.069Z,1509701586.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:06.108Z,1509701586.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:06.469Z,1509701586.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:06.505Z,1509701586.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:06.860Z,1509701586.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:06.875Z,1509701586.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:07.259Z,1509701587.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:07.275Z,1509701587.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:07.727Z,1509701587.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:07.758Z,1509701587.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:08.073Z,1509701588.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:08.105Z,1509701588.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:08.474Z,1509701588.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:08.505Z,1509701588.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:08.863Z,1509701588.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:08.883Z,1509701588.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:09.261Z,1509701589.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:09.282Z,1509701589.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:09.292Z,1509701589.292 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:33:09.292Z,1509701589.292 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T09:33:09.292Z,1509701589.292 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:33:09.400Z,1509701589.400 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:33:09.671Z,1509701589.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:09.697Z,1509701589.697 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:33:09.818Z,1509701589.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T09:33:09.819Z,1509701589.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:09.911Z,1509701589.911 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:33:10.072Z,1509701590.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:10.088Z,1509701590.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:33:10.089Z,1509701590.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:10.469Z,1509701590.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:10.484Z,1509701590.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:33:10.485Z,1509701590.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:10.864Z,1509701590.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:10.879Z,1509701590.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:33:10.880Z,1509701590.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:11.260Z,1509701591.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:11.322Z,1509701591.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:33:11.323Z,1509701591.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:11.410Z,1509701591.410 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:33:11.410Z,1509701591.410 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T09:33:11.525Z,1509701591.525 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:33:11.526Z,1509701591.526 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:33:11.526Z,1509701591.526 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:33:11.526Z,1509701591.526 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:33:11.673Z,1509701591.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:11.735Z,1509701591.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-03T09:33:11.736Z,1509701591.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:12.073Z,1509701592.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:12.101Z,1509701592.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:33:12.103Z,1509701592.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:12.473Z,1509701592.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:12.530Z,1509701592.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:33:12.531Z,1509701592.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:12.863Z,1509701592.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:12.877Z,1509701592.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:33:12.878Z,1509701592.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:13.262Z,1509701593.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:13.320Z,1509701593.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:33:13.321Z,1509701593.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:13.672Z,1509701593.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:13.729Z,1509701593.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:33:13.731Z,1509701593.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:13.731Z,1509701593.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 186
2017-11-03T09:33:13.731Z,1509701593.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:33:13.733Z,1509701593.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:13.733Z,1509701593.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 186
2017-11-03T09:33:13.733Z,1509701593.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:33:13.735Z,1509701593.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:13.735Z,1509701593.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 186
2017-11-03T09:33:13.735Z,1509701593.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:33:13.821Z,1509701593.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:33:13.821Z,1509701593.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:33:13.821Z,1509701593.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:33:14.078Z,1509701594.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:14.173Z,1509701594.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:33:14.173Z,1509701594.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 186
2017-11-03T09:33:14.173Z,1509701594.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:33:14.174Z,1509701594.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 186
2017-11-03T09:33:14.174Z,1509701594.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:33:14.174Z,1509701594.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 186
2017-11-03T09:33:14.473Z,1509701594.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:14.487Z,1509701594.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:33:14.488Z,1509701594.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:33:14.488Z,1509701594.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:33:14.489Z,1509701594.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:33:14.489Z,1509701594.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:33:14.489Z,1509701594.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:33:14.490Z,1509701594.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:33:14.490Z,1509701594.490 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:33:14.491Z,1509701594.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:33:14.852Z,1509701594.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:14.879Z,1509701594.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:33:14.880Z,1509701594.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:15.256Z,1509701595.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:15.282Z,1509701595.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:33:15.283Z,1509701595.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:15.677Z,1509701595.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:15.698Z,1509701595.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:33:15.699Z,1509701595.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:15.733Z,1509701595.733 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:33:15.832Z,1509701595.832 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:33:15.833Z,1509701595.833 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:33:15.833Z,1509701595.833 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:33:15.834Z,1509701595.834 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:33:16.118Z,1509701596.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:16.141Z,1509701596.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T09:33:16.142Z,1509701596.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:16.488Z,1509701596.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:16.518Z,1509701596.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:16.860Z,1509701596.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:16.875Z,1509701596.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:17.263Z,1509701597.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:17.279Z,1509701597.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:17.670Z,1509701597.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:17.686Z,1509701597.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:18.068Z,1509701598.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:18.084Z,1509701598.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:18.468Z,1509701598.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:18.484Z,1509701598.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:18.863Z,1509701598.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:18.930Z,1509701598.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:19.263Z,1509701599.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:19.279Z,1509701599.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:19.683Z,1509701599.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:19.724Z,1509701599.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:20.073Z,1509701600.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:20.089Z,1509701600.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:23.278Z,1509701603.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:23.294Z,1509701603.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:23.440Z,1509701603.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:23.469Z,1509701603.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:23.840Z,1509701603.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:23.855Z,1509701603.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:24.244Z,1509701604.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:24.295Z,1509701604.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:24.658Z,1509701604.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:24.682Z,1509701604.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:25.053Z,1509701605.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:25.088Z,1509701605.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:25.454Z,1509701605.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:25.485Z,1509701605.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:25.848Z,1509701605.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:25.902Z,1509701605.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:26.243Z,1509701606.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:26.263Z,1509701606.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:26.654Z,1509701606.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:26.710Z,1509701606.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:27.058Z,1509701607.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:27.107Z,1509701607.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:27.457Z,1509701607.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:27.488Z,1509701607.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:27.852Z,1509701607.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:27.867Z,1509701607.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:28.244Z,1509701608.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:28.259Z,1509701608.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:28.658Z,1509701608.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:28.689Z,1509701608.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:29.062Z,1509701609.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:29.094Z,1509701609.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:29.454Z,1509701609.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:29.469Z,1509701609.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:29.865Z,1509701609.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:29.922Z,1509701609.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:30.244Z,1509701610.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:30.267Z,1509701610.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:30.661Z,1509701610.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:30.693Z,1509701610.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:31.061Z,1509701611.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:31.094Z,1509701611.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:31.450Z,1509701611.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:31.465Z,1509701611.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:31.848Z,1509701611.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:31.863Z,1509701611.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:32.259Z,1509701612.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:32.274Z,1509701612.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:32.651Z,1509701612.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:32.671Z,1509701612.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:33.054Z,1509701613.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:33.069Z,1509701613.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:33.462Z,1509701613.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:33.495Z,1509701613.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:33.848Z,1509701613.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:33.864Z,1509701613.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:34.263Z,1509701614.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:34.287Z,1509701614.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:34.654Z,1509701614.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:34.670Z,1509701614.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:35.062Z,1509701615.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:35.096Z,1509701615.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:35.454Z,1509701615.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:35.475Z,1509701615.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:35.849Z,1509701615.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:35.864Z,1509701615.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:36.249Z,1509701616.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:36.264Z,1509701616.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:36.654Z,1509701616.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:36.669Z,1509701616.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:37.062Z,1509701617.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:37.093Z,1509701617.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:37.462Z,1509701617.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:37.493Z,1509701617.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:37.847Z,1509701617.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:37.906Z,1509701617.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:38.249Z,1509701618.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:38.265Z,1509701618.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:38.657Z,1509701618.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:38.672Z,1509701618.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:39.056Z,1509701619.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:39.118Z,1509701619.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:39.457Z,1509701619.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:39.473Z,1509701619.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:39.848Z,1509701619.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:39.864Z,1509701619.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:40.248Z,1509701620.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:40.306Z,1509701620.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:40.658Z,1509701620.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:40.679Z,1509701620.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:41.057Z,1509701621.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:41.107Z,1509701621.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:41.457Z,1509701621.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:41.510Z,1509701621.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:41.858Z,1509701621.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:41.873Z,1509701621.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:42.251Z,1509701622.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:42.275Z,1509701622.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:42.659Z,1509701622.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:42.674Z,1509701622.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:43.066Z,1509701623.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:43.087Z,1509701623.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:43.461Z,1509701623.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:43.483Z,1509701623.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:43.878Z,1509701623.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:43.925Z,1509701623.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:44.243Z,1509701624.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:44.270Z,1509701624.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:44.657Z,1509701624.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:44.676Z,1509701624.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:45.058Z,1509701625.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:45.080Z,1509701625.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:45.454Z,1509701625.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:45.477Z,1509701625.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:45.844Z,1509701625.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:45.870Z,1509701625.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:46.265Z,1509701626.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:46.280Z,1509701626.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:46.659Z,1509701626.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:46.678Z,1509701626.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:47.066Z,1509701627.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:47.083Z,1509701627.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:47.464Z,1509701627.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:47.479Z,1509701627.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:47.838Z,1509701627.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:47.873Z,1509701627.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:48.265Z,1509701628.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:48.281Z,1509701628.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:48.663Z,1509701628.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:48.678Z,1509701628.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:49.059Z,1509701629.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:49.075Z,1509701629.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:49.463Z,1509701629.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:49.478Z,1509701629.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:49.859Z,1509701629.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:49.876Z,1509701629.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:50.243Z,1509701630.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:50.270Z,1509701630.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:50.626Z,1509701630.626 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T09:33:50.626Z,1509701630.626 [NAL9602] Data Fault, FailCount= 1
2017-11-03T09:33:50.626Z,1509701630.626 [NAL9602](ERROR): Data Fault
2017-11-03T09:33:50.644Z,1509701630.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:50.681Z,1509701630.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:50.757Z,1509701630.757 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T09:33:51.026Z,1509701631.026 [NAL9602](INFO): Powering down
2017-11-03T09:33:51.043Z,1509701631.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:51.075Z,1509701631.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:51.442Z,1509701631.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:51.474Z,1509701631.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:51.857Z,1509701631.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:51.873Z,1509701631.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:51.968Z,1509701631.968 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T09:33:51.969Z,1509701631.969 [NAL9602] No Fault, FailCount= 1
2017-11-03T09:33:52.243Z,1509701632.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:52.295Z,1509701632.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:52.642Z,1509701632.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:52.674Z,1509701632.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:53.036Z,1509701633.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:53.059Z,1509701633.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:53.440Z,1509701633.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:53.475Z,1509701633.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:53.838Z,1509701633.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:53.895Z,1509701633.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:54.236Z,1509701634.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:54.252Z,1509701634.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:54.636Z,1509701634.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:54.678Z,1509701634.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:55.036Z,1509701635.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:55.051Z,1509701635.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:55.442Z,1509701635.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:55.495Z,1509701635.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:55.851Z,1509701635.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:55.918Z,1509701635.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:56.242Z,1509701636.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:56.279Z,1509701636.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:56.642Z,1509701636.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:56.678Z,1509701636.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:57.040Z,1509701637.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:57.055Z,1509701637.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:57.440Z,1509701637.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:57.455Z,1509701637.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:57.844Z,1509701637.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:57.919Z,1509701637.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:58.252Z,1509701638.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:58.275Z,1509701638.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:58.635Z,1509701638.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:58.660Z,1509701638.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:59.035Z,1509701639.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:59.061Z,1509701639.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:59.449Z,1509701639.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:59.467Z,1509701639.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:33:59.835Z,1509701639.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:33:59.860Z,1509701639.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:00.261Z,1509701640.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:00.277Z,1509701640.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:00.649Z,1509701640.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:00.668Z,1509701640.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:01.051Z,1509701641.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:01.066Z,1509701641.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:01.439Z,1509701641.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:01.467Z,1509701641.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:01.840Z,1509701641.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:01.865Z,1509701641.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:02.263Z,1509701642.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:02.279Z,1509701642.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:02.649Z,1509701642.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:02.668Z,1509701642.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:03.040Z,1509701643.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:03.071Z,1509701643.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:03.452Z,1509701643.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:03.468Z,1509701643.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:03.838Z,1509701643.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:03.864Z,1509701643.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:04.249Z,1509701644.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:04.265Z,1509701644.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:04.650Z,1509701644.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:04.671Z,1509701644.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:05.048Z,1509701645.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:05.067Z,1509701645.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:05.449Z,1509701645.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:05.464Z,1509701645.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:05.839Z,1509701645.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:05.864Z,1509701645.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:06.240Z,1509701646.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:06.311Z,1509701646.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:06.650Z,1509701646.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:06.670Z,1509701646.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:07.050Z,1509701647.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:07.065Z,1509701647.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:07.449Z,1509701647.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:07.491Z,1509701647.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:07.858Z,1509701647.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:07.879Z,1509701647.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:08.236Z,1509701648.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:08.266Z,1509701648.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:08.641Z,1509701648.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:08.667Z,1509701648.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:09.040Z,1509701649.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:09.091Z,1509701649.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:09.442Z,1509701649.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:09.468Z,1509701649.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:09.858Z,1509701649.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:09.915Z,1509701649.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:10.240Z,1509701650.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:10.305Z,1509701650.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:10.638Z,1509701650.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:10.663Z,1509701650.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:11.039Z,1509701651.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:11.065Z,1509701651.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:11.440Z,1509701651.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:11.466Z,1509701651.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:11.840Z,1509701651.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:11.923Z,1509701651.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:12.239Z,1509701652.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:12.275Z,1509701652.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:12.640Z,1509701652.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:12.656Z,1509701652.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:13.040Z,1509701653.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:13.055Z,1509701653.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:13.440Z,1509701653.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:13.456Z,1509701653.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:13.840Z,1509701653.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:13.856Z,1509701653.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:14.252Z,1509701654.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:14.285Z,1509701654.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:14.641Z,1509701654.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:14.657Z,1509701654.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:15.040Z,1509701655.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:15.059Z,1509701655.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:15.437Z,1509701655.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:15.451Z,1509701655.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:15.836Z,1509701655.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:15.851Z,1509701655.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:16.271Z,1509701656.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:16.287Z,1509701656.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:16.636Z,1509701656.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:16.651Z,1509701656.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:17.043Z,1509701657.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:17.059Z,1509701657.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:17.447Z,1509701657.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:17.463Z,1509701657.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:17.846Z,1509701657.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:17.886Z,1509701657.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:18.240Z,1509701658.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:18.256Z,1509701658.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:18.641Z,1509701658.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:18.657Z,1509701658.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:19.047Z,1509701659.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:19.062Z,1509701659.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:19.440Z,1509701659.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:19.456Z,1509701659.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:19.856Z,1509701659.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:19.885Z,1509701659.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:20.243Z,1509701660.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:20.283Z,1509701660.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:23.453Z,1509701663.453 [NAL9602](INFO): Powering up NAL9602
2017-11-03T09:34:23.481Z,1509701663.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:23.570Z,1509701663.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:23.757Z,1509701663.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:23.801Z,1509701663.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:24.113Z,1509701664.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:24.172Z,1509701664.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:24.515Z,1509701664.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:24.542Z,1509701664.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:24.925Z,1509701664.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:24.972Z,1509701664.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:25.312Z,1509701665.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:25.364Z,1509701665.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:25.727Z,1509701665.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:25.742Z,1509701665.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:26.115Z,1509701666.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:26.146Z,1509701666.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:26.527Z,1509701666.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:26.542Z,1509701666.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:26.928Z,1509701666.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:26.943Z,1509701666.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:27.327Z,1509701667.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:27.342Z,1509701667.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:27.726Z,1509701667.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:27.742Z,1509701667.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:28.126Z,1509701668.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:28.187Z,1509701668.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:28.519Z,1509701668.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:28.546Z,1509701668.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:28.912Z,1509701668.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:28.942Z,1509701668.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:29.319Z,1509701669.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:29.346Z,1509701669.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:29.719Z,1509701669.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:29.745Z,1509701669.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:30.119Z,1509701670.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:30.206Z,1509701670.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:30.512Z,1509701670.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:30.544Z,1509701670.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:30.917Z,1509701670.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:30.945Z,1509701670.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:31.319Z,1509701671.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:31.344Z,1509701671.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:31.740Z,1509701671.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:31.759Z,1509701671.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:32.119Z,1509701672.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:32.145Z,1509701672.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:32.519Z,1509701672.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:32.544Z,1509701672.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:32.916Z,1509701672.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:32.947Z,1509701672.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:33.316Z,1509701673.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:33.350Z,1509701673.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:33.715Z,1509701673.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:33.755Z,1509701673.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:34.139Z,1509701674.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:34.154Z,1509701674.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:34.500Z,1509701674.500 [NAL9602](INFO): NAL9602 initialized
2017-11-03T09:34:34.517Z,1509701674.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:34.548Z,1509701674.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:34.915Z,1509701674.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:34.947Z,1509701674.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:35.339Z,1509701675.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:35.354Z,1509701675.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:35.748Z,1509701675.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:35.768Z,1509701675.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:36.139Z,1509701676.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:36.154Z,1509701676.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:36.517Z,1509701676.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:36.545Z,1509701676.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:36.918Z,1509701676.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:36.971Z,1509701676.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:37.320Z,1509701677.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:37.346Z,1509701677.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:37.752Z,1509701677.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:37.817Z,1509701677.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:38.130Z,1509701678.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:38.157Z,1509701678.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:38.529Z,1509701678.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:38.559Z,1509701678.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:38.930Z,1509701678.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:39.002Z,1509701679.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:39.317Z,1509701679.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:39.332Z,1509701679.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:39.719Z,1509701679.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:39.767Z,1509701679.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:40.128Z,1509701680.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:40.198Z,1509701680.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:40.518Z,1509701680.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:40.549Z,1509701680.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:40.912Z,1509701680.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:40.927Z,1509701680.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:41.330Z,1509701681.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:41.357Z,1509701681.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:41.730Z,1509701681.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:41.756Z,1509701681.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:42.130Z,1509701682.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:42.230Z,1509701682.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:42.526Z,1509701682.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:42.541Z,1509701682.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:42.924Z,1509701682.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:42.939Z,1509701682.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:43.325Z,1509701683.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:43.346Z,1509701683.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:43.725Z,1509701683.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:43.740Z,1509701683.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:44.130Z,1509701684.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:44.215Z,1509701684.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:44.533Z,1509701684.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:44.555Z,1509701684.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:44.934Z,1509701684.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:44.955Z,1509701684.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:45.325Z,1509701685.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:45.340Z,1509701685.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:45.729Z,1509701685.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:45.744Z,1509701685.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:46.130Z,1509701686.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:46.146Z,1509701686.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:46.527Z,1509701686.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:46.542Z,1509701686.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:46.930Z,1509701686.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:46.945Z,1509701686.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:47.335Z,1509701687.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:47.355Z,1509701687.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:47.740Z,1509701687.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:47.768Z,1509701687.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:48.133Z,1509701688.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:48.157Z,1509701688.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:48.518Z,1509701688.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:48.546Z,1509701688.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:48.919Z,1509701688.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:48.955Z,1509701688.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:49.317Z,1509701689.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:49.345Z,1509701689.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:49.735Z,1509701689.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:49.758Z,1509701689.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:50.138Z,1509701690.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:50.158Z,1509701690.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:50.542Z,1509701690.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:50.559Z,1509701690.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:50.936Z,1509701690.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:50.952Z,1509701690.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:51.318Z,1509701691.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:51.344Z,1509701691.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:51.751Z,1509701691.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:51.806Z,1509701691.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:52.118Z,1509701692.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:52.195Z,1509701692.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:52.513Z,1509701692.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:52.530Z,1509701692.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:52.919Z,1509701692.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:52.971Z,1509701692.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:53.335Z,1509701693.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:53.362Z,1509701693.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:53.730Z,1509701693.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:53.798Z,1509701693.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:54.138Z,1509701694.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:54.186Z,1509701694.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:54.520Z,1509701694.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:54.535Z,1509701694.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:54.921Z,1509701694.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:54.936Z,1509701694.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:55.321Z,1509701695.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:55.343Z,1509701695.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:55.720Z,1509701695.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:55.735Z,1509701695.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:56.137Z,1509701696.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:56.216Z,1509701696.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:56.533Z,1509701696.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:56.568Z,1509701696.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:56.934Z,1509701696.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:56.969Z,1509701696.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:57.320Z,1509701697.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:57.335Z,1509701697.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:57.720Z,1509701697.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:57.734Z,1509701697.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:58.120Z,1509701698.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:58.135Z,1509701698.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:58.519Z,1509701698.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:58.547Z,1509701698.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:58.924Z,1509701698.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:58.946Z,1509701698.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:59.329Z,1509701699.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:59.344Z,1509701699.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:34:59.733Z,1509701699.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:34:59.748Z,1509701699.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:00.130Z,1509701700.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:00.145Z,1509701700.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:00.527Z,1509701700.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:00.542Z,1509701700.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:00.928Z,1509701700.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:00.943Z,1509701700.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:01.327Z,1509701701.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:01.346Z,1509701701.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:01.728Z,1509701701.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:01.759Z,1509701701.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:02.145Z,1509701702.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:02.173Z,1509701702.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:02.532Z,1509701702.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:02.547Z,1509701702.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:02.935Z,1509701702.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:02.955Z,1509701702.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:03.325Z,1509701703.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:03.340Z,1509701703.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:03.738Z,1509701703.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:03.754Z,1509701703.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:04.130Z,1509701704.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:04.146Z,1509701704.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:04.529Z,1509701704.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:04.544Z,1509701704.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:04.926Z,1509701704.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:04.942Z,1509701704.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:05.334Z,1509701705.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:05.350Z,1509701705.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:05.781Z,1509701705.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:05.846Z,1509701705.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:06.132Z,1509701706.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:06.148Z,1509701706.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:06.529Z,1509701706.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:06.594Z,1509701706.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:06.925Z,1509701706.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:06.940Z,1509701706.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:07.327Z,1509701707.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:07.342Z,1509701707.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:07.728Z,1509701707.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:07.779Z,1509701707.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:08.132Z,1509701708.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:08.147Z,1509701708.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:08.532Z,1509701708.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:08.578Z,1509701708.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:08.934Z,1509701708.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:08.991Z,1509701708.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:09.325Z,1509701709.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:09.340Z,1509701709.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:09.725Z,1509701709.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:09.739Z,1509701709.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:10.128Z,1509701710.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:10.190Z,1509701710.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:10.526Z,1509701710.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:10.542Z,1509701710.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:10.915Z,1509701710.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:10.946Z,1509701710.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:11.341Z,1509701711.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:11.357Z,1509701711.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:11.740Z,1509701711.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:11.756Z,1509701711.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:11.860Z,1509701711.860 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:35:11.861Z,1509701711.861 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T09:35:11.861Z,1509701711.861 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:35:11.862Z,1509701711.862 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:35:12.137Z,1509701712.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:12.205Z,1509701712.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:35:12.207Z,1509701712.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:12.273Z,1509701712.273 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:35:12.391Z,1509701712.391 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:35:12.517Z,1509701712.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:12.546Z,1509701712.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:35:12.547Z,1509701712.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:12.920Z,1509701712.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:12.946Z,1509701712.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:35:12.947Z,1509701712.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:13.320Z,1509701713.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:13.346Z,1509701713.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:35:13.347Z,1509701713.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:13.720Z,1509701713.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:13.747Z,1509701713.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:35:13.748Z,1509701713.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:13.836Z,1509701713.836 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:35:13.837Z,1509701713.837 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T09:35:14.008Z,1509701714.008 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:35:14.009Z,1509701714.009 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:35:14.009Z,1509701714.009 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:35:14.009Z,1509701714.009 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:35:14.134Z,1509701714.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:14.165Z,1509701714.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:35:14.167Z,1509701714.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:14.533Z,1509701714.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:14.548Z,1509701714.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:35:14.549Z,1509701714.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:14.934Z,1509701714.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:14.949Z,1509701714.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:35:14.950Z,1509701714.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:15.319Z,1509701715.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:15.346Z,1509701715.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:35:15.347Z,1509701715.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:15.712Z,1509701715.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:15.740Z,1509701715.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:35:15.741Z,1509701715.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:16.120Z,1509701716.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:16.146Z,1509701716.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:35:16.147Z,1509701716.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:16.518Z,1509701716.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:16.544Z,1509701716.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:35:16.545Z,1509701716.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:16.919Z,1509701716.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:16.944Z,1509701716.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:35:16.945Z,1509701716.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:17.331Z,1509701717.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:17.352Z,1509701717.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:35:17.353Z,1509701717.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:17.741Z,1509701717.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:17.756Z,1509701717.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:35:17.757Z,1509701717.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:18.142Z,1509701718.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:18.159Z,1509701718.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:35:18.161Z,1509701718.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:18.242Z,1509701718.242 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:35:18.319Z,1509701718.319 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:35:18.321Z,1509701718.321 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:35:18.321Z,1509701718.321 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:35:18.322Z,1509701718.322 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:35:18.518Z,1509701718.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:18.555Z,1509701718.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:35:18.561Z,1509701718.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:18.924Z,1509701718.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:18.957Z,1509701718.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:19.321Z,1509701719.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:19.337Z,1509701719.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:19.723Z,1509701719.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:19.739Z,1509701719.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:20.134Z,1509701720.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:20.169Z,1509701720.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:20.534Z,1509701720.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:20.558Z,1509701720.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:23.638Z,1509701723.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:23.724Z,1509701723.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:23.846Z,1509701723.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:23.891Z,1509701723.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:24.244Z,1509701724.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:24.270Z,1509701724.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:24.643Z,1509701724.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:24.719Z,1509701724.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:25.069Z,1509701725.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:25.084Z,1509701725.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:25.461Z,1509701725.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:25.508Z,1509701725.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:25.861Z,1509701725.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:25.930Z,1509701725.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:26.245Z,1509701726.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:26.261Z,1509701726.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:26.644Z,1509701726.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:26.660Z,1509701726.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:27.057Z,1509701727.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:27.089Z,1509701727.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:27.457Z,1509701727.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:27.489Z,1509701727.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:27.866Z,1509701727.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:27.905Z,1509701727.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:28.244Z,1509701728.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:28.260Z,1509701728.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:28.644Z,1509701728.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:28.663Z,1509701728.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:29.062Z,1509701729.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:29.086Z,1509701729.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:29.457Z,1509701729.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:29.489Z,1509701729.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:29.858Z,1509701729.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:29.885Z,1509701729.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:30.244Z,1509701730.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:30.260Z,1509701730.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:30.643Z,1509701730.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:30.659Z,1509701730.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:31.061Z,1509701731.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:31.085Z,1509701731.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:31.457Z,1509701731.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:31.488Z,1509701731.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:31.861Z,1509701731.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:31.885Z,1509701731.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:32.251Z,1509701732.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:32.282Z,1509701732.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:32.644Z,1509701732.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:32.663Z,1509701732.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:33.057Z,1509701733.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:33.073Z,1509701733.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:33.461Z,1509701733.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:33.477Z,1509701733.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:33.873Z,1509701733.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:33.903Z,1509701733.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:34.249Z,1509701734.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:34.265Z,1509701734.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:34.654Z,1509701734.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:34.670Z,1509701734.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:35.054Z,1509701735.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:35.070Z,1509701735.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:35.450Z,1509701735.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:35.466Z,1509701735.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:35.856Z,1509701735.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:35.872Z,1509701735.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:36.265Z,1509701736.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:36.281Z,1509701736.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:36.663Z,1509701736.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:36.683Z,1509701736.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:37.065Z,1509701737.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:37.083Z,1509701737.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:37.457Z,1509701737.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:37.472Z,1509701737.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:37.868Z,1509701737.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:38.028Z,1509701738.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:38.254Z,1509701738.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:38.270Z,1509701738.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:38.652Z,1509701738.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:38.710Z,1509701738.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:39.067Z,1509701739.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:39.087Z,1509701739.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:39.461Z,1509701739.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:39.518Z,1509701739.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:39.864Z,1509701739.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:39.915Z,1509701739.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:40.268Z,1509701740.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:40.285Z,1509701740.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:40.658Z,1509701740.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:40.674Z,1509701740.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:41.070Z,1509701741.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:41.086Z,1509701741.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:41.468Z,1509701741.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:41.483Z,1509701741.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:41.866Z,1509701741.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:41.881Z,1509701741.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:42.271Z,1509701742.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:42.286Z,1509701742.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:42.640Z,1509701742.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:42.677Z,1509701742.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:43.066Z,1509701743.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:43.081Z,1509701743.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:43.467Z,1509701743.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:43.482Z,1509701743.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:43.859Z,1509701743.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:43.906Z,1509701743.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:44.245Z,1509701744.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:44.272Z,1509701744.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:44.644Z,1509701744.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:44.670Z,1509701744.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:45.062Z,1509701745.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:45.078Z,1509701745.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:45.469Z,1509701745.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:45.485Z,1509701745.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:45.869Z,1509701745.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:45.884Z,1509701745.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:46.248Z,1509701746.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:46.275Z,1509701746.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:46.647Z,1509701746.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:46.673Z,1509701746.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:47.065Z,1509701747.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:47.089Z,1509701747.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:47.470Z,1509701747.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:47.485Z,1509701747.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:47.861Z,1509701747.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:47.883Z,1509701747.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:48.245Z,1509701748.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:48.272Z,1509701748.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:48.647Z,1509701748.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:48.674Z,1509701748.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:49.065Z,1509701749.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:49.081Z,1509701749.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:49.465Z,1509701749.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:49.481Z,1509701749.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:49.866Z,1509701749.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:49.881Z,1509701749.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:50.248Z,1509701750.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:50.273Z,1509701750.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:50.644Z,1509701750.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:50.670Z,1509701750.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:51.070Z,1509701751.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:51.085Z,1509701751.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:51.469Z,1509701751.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:51.484Z,1509701751.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:51.903Z,1509701751.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:52.026Z,1509701752.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:52.246Z,1509701752.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:52.272Z,1509701752.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:52.647Z,1509701752.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:52.714Z,1509701752.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:53.065Z,1509701753.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:53.080Z,1509701753.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:53.462Z,1509701753.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:53.518Z,1509701753.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:53.865Z,1509701753.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:53.922Z,1509701753.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:54.277Z,1509701754.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:54.293Z,1509701754.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:54.641Z,1509701754.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:54.669Z,1509701754.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:55.066Z,1509701755.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:55.081Z,1509701755.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:55.467Z,1509701755.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:55.483Z,1509701755.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:55.870Z,1509701755.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:55.885Z,1509701755.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:56.277Z,1509701756.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:56.299Z,1509701756.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:56.645Z,1509701756.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:56.681Z,1509701756.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:57.054Z,1509701757.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:57.089Z,1509701757.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:57.475Z,1509701757.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:57.491Z,1509701757.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:57.854Z,1509701757.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:57.881Z,1509701757.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:58.246Z,1509701758.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:58.262Z,1509701758.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:58.647Z,1509701758.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:58.663Z,1509701758.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:59.062Z,1509701759.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:59.090Z,1509701759.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:59.457Z,1509701759.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:59.484Z,1509701759.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:35:59.857Z,1509701759.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:35:59.879Z,1509701759.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:00.244Z,1509701760.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:00.260Z,1509701760.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:00.643Z,1509701760.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:00.659Z,1509701760.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:01.057Z,1509701761.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:01.082Z,1509701761.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:01.457Z,1509701761.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:01.482Z,1509701761.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:01.880Z,1509701761.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:01.895Z,1509701761.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:02.244Z,1509701762.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:02.260Z,1509701762.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:02.644Z,1509701762.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:02.683Z,1509701762.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:03.043Z,1509701763.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:03.059Z,1509701763.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:03.444Z,1509701763.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:03.460Z,1509701763.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:03.848Z,1509701763.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:03.867Z,1509701763.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:04.263Z,1509701764.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:04.303Z,1509701764.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:04.655Z,1509701764.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:04.695Z,1509701764.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:05.062Z,1509701765.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:05.106Z,1509701765.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:05.453Z,1509701765.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:05.481Z,1509701765.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:05.887Z,1509701765.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:05.975Z,1509701765.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:06.246Z,1509701766.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:06.401Z,1509701766.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:06.660Z,1509701766.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:06.698Z,1509701766.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:07.079Z,1509701767.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:07.143Z,1509701767.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:07.467Z,1509701767.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:07.499Z,1509701767.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:07.865Z,1509701767.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:07.943Z,1509701767.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:08.281Z,1509701768.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:08.338Z,1509701768.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:08.648Z,1509701768.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:08.663Z,1509701768.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:09.117Z,1509701769.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:09.213Z,1509701769.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:09.467Z,1509701769.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:09.499Z,1509701769.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:09.868Z,1509701769.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:09.895Z,1509701769.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:10.293Z,1509701770.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:10.321Z,1509701770.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:10.650Z,1509701770.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:10.678Z,1509701770.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:11.075Z,1509701771.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:11.111Z,1509701771.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:11.486Z,1509701771.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:11.555Z,1509701771.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:11.863Z,1509701771.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:11.923Z,1509701771.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:12.283Z,1509701772.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:12.321Z,1509701772.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:12.685Z,1509701772.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:12.718Z,1509701772.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:13.064Z,1509701773.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:13.084Z,1509701773.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:13.489Z,1509701773.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:13.530Z,1509701773.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:13.876Z,1509701773.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:13.908Z,1509701773.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:14.244Z,1509701774.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:14.295Z,1509701774.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:14.654Z,1509701774.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:14.673Z,1509701774.673 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:14.674Z,1509701774.674 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 187
2017-11-03T09:36:14.674Z,1509701774.674 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:36:14.675Z,1509701774.675 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:14.676Z,1509701774.676 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 187
2017-11-03T09:36:14.676Z,1509701774.676 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:36:14.682Z,1509701774.682 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:14.682Z,1509701774.682 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 187
2017-11-03T09:36:14.682Z,1509701774.682 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:36:14.792Z,1509701774.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:36:14.793Z,1509701774.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:36:14.793Z,1509701774.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:36:15.056Z,1509701775.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:15.173Z,1509701775.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:36:15.173Z,1509701775.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 187
2017-11-03T09:36:15.173Z,1509701775.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:36:15.173Z,1509701775.173 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 187
2017-11-03T09:36:15.174Z,1509701775.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:36:15.174Z,1509701775.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 187
2017-11-03T09:36:15.482Z,1509701775.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:15.502Z,1509701775.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:36:15.502Z,1509701775.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:36:15.503Z,1509701775.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:36:15.503Z,1509701775.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:36:15.503Z,1509701775.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:36:15.504Z,1509701775.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:36:15.504Z,1509701775.504 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:36:15.529Z,1509701775.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:36:15.529Z,1509701775.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:36:15.856Z,1509701775.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:15.899Z,1509701775.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:16.253Z,1509701776.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:16.278Z,1509701776.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:16.666Z,1509701776.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:16.706Z,1509701776.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:17.055Z,1509701777.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:17.103Z,1509701777.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:17.459Z,1509701777.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:17.503Z,1509701777.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:17.854Z,1509701777.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:17.880Z,1509701777.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:18.254Z,1509701778.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:18.279Z,1509701778.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:18.653Z,1509701778.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:18.677Z,1509701778.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:19.062Z,1509701779.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:19.097Z,1509701779.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:19.466Z,1509701779.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:19.474Z,1509701779.474 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T09:36:19.474Z,1509701779.474 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:36:19.474Z,1509701779.474 [BPC1](ERROR): Data Fault
2017-11-03T09:36:19.491Z,1509701779.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:19.605Z,1509701779.605 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:36:19.886Z,1509701779.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:19.957Z,1509701779.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:20.246Z,1509701780.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:20.287Z,1509701780.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:20.645Z,1509701780.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:20.685Z,1509701780.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:20.792Z,1509701780.792 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:36:20.792Z,1509701780.792 [BPC1] No Fault, FailCount= 1
2017-11-03T09:36:24.817Z,1509701784.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:24.891Z,1509701784.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:25.032Z,1509701785.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:25.074Z,1509701785.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:25.427Z,1509701785.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:25.446Z,1509701785.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:25.819Z,1509701785.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:25.842Z,1509701785.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:26.218Z,1509701786.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:26.233Z,1509701786.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:26.616Z,1509701786.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:26.656Z,1509701786.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:27.025Z,1509701787.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:27.041Z,1509701787.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:27.428Z,1509701787.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:27.443Z,1509701787.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:27.828Z,1509701787.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:27.851Z,1509701787.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:28.221Z,1509701788.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:28.236Z,1509701788.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:28.616Z,1509701788.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:28.632Z,1509701788.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:29.025Z,1509701789.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:29.040Z,1509701789.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:29.429Z,1509701789.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:29.444Z,1509701789.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:29.828Z,1509701789.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:29.843Z,1509701789.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:30.220Z,1509701790.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:30.235Z,1509701790.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:30.619Z,1509701790.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:30.635Z,1509701790.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:31.029Z,1509701791.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:31.044Z,1509701791.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:31.425Z,1509701791.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:31.440Z,1509701791.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:31.830Z,1509701791.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:31.845Z,1509701791.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:32.220Z,1509701792.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:32.236Z,1509701792.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:32.613Z,1509701792.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:32.628Z,1509701792.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:33.029Z,1509701793.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:33.044Z,1509701793.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:33.428Z,1509701793.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:33.451Z,1509701793.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:33.828Z,1509701793.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:33.910Z,1509701793.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:34.210Z,1509701794.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:34.237Z,1509701794.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:34.609Z,1509701794.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:34.640Z,1509701794.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:35.030Z,1509701795.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:35.045Z,1509701795.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:35.430Z,1509701795.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:35.446Z,1509701795.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:35.829Z,1509701795.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:35.845Z,1509701795.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:36.249Z,1509701796.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:36.264Z,1509701796.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:36.611Z,1509701796.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:36.643Z,1509701796.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:37.030Z,1509701797.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:37.045Z,1509701797.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:37.431Z,1509701797.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:37.450Z,1509701797.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:37.830Z,1509701797.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:37.845Z,1509701797.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:38.247Z,1509701798.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:38.268Z,1509701798.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:38.609Z,1509701798.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:38.669Z,1509701798.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:39.026Z,1509701799.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:39.080Z,1509701799.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:39.426Z,1509701799.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:39.457Z,1509701799.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:39.829Z,1509701799.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:39.879Z,1509701799.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:40.212Z,1509701800.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:40.227Z,1509701800.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:40.608Z,1509701800.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:40.666Z,1509701800.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:41.025Z,1509701801.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:41.068Z,1509701801.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:41.426Z,1509701801.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:41.457Z,1509701801.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:41.830Z,1509701801.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:41.853Z,1509701801.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:42.212Z,1509701802.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:42.235Z,1509701802.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:42.612Z,1509701802.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:42.627Z,1509701802.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:43.025Z,1509701803.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:43.057Z,1509701803.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:43.421Z,1509701803.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:43.436Z,1509701803.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:43.853Z,1509701803.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:43.872Z,1509701803.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:44.213Z,1509701804.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:44.228Z,1509701804.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:44.612Z,1509701804.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:44.627Z,1509701804.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:45.025Z,1509701805.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:45.061Z,1509701805.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:45.429Z,1509701805.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:45.460Z,1509701805.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:45.829Z,1509701805.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:45.859Z,1509701805.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:46.213Z,1509701806.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:46.229Z,1509701806.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:46.612Z,1509701806.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:46.628Z,1509701806.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:47.025Z,1509701807.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:47.040Z,1509701807.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:47.425Z,1509701807.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:47.457Z,1509701807.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:47.829Z,1509701807.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:47.901Z,1509701807.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:48.222Z,1509701808.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:48.243Z,1509701808.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:48.621Z,1509701808.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:48.637Z,1509701808.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:49.030Z,1509701809.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:49.074Z,1509701809.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:49.433Z,1509701809.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:49.448Z,1509701809.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:49.833Z,1509701809.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:49.848Z,1509701809.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:50.251Z,1509701810.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:50.287Z,1509701810.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:50.604Z,1509701810.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:50.636Z,1509701810.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:51.022Z,1509701811.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:51.055Z,1509701811.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:51.422Z,1509701811.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:51.455Z,1509701811.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:51.817Z,1509701811.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:51.847Z,1509701811.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:52.250Z,1509701812.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:52.284Z,1509701812.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:52.611Z,1509701812.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:52.642Z,1509701812.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:53.022Z,1509701813.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:53.094Z,1509701813.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:53.421Z,1509701813.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:53.475Z,1509701813.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:53.829Z,1509701813.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:53.859Z,1509701813.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:54.213Z,1509701814.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:54.259Z,1509701814.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:54.616Z,1509701814.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:54.631Z,1509701814.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:55.026Z,1509701815.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:55.099Z,1509701815.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:55.426Z,1509701815.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:55.483Z,1509701815.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:55.826Z,1509701815.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:55.851Z,1509701815.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:56.212Z,1509701816.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:56.228Z,1509701816.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:56.615Z,1509701816.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:56.654Z,1509701816.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:57.021Z,1509701817.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:57.053Z,1509701817.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:57.425Z,1509701817.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:57.461Z,1509701817.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:57.829Z,1509701817.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:57.865Z,1509701817.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:58.216Z,1509701818.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:58.232Z,1509701818.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:58.616Z,1509701818.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:58.631Z,1509701818.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:59.029Z,1509701819.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:59.044Z,1509701819.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:59.421Z,1509701819.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:59.436Z,1509701819.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:36:59.821Z,1509701819.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:36:59.837Z,1509701819.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:00.216Z,1509701820.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:00.231Z,1509701820.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:00.613Z,1509701820.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:00.629Z,1509701820.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:01.022Z,1509701821.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:01.037Z,1509701821.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:01.429Z,1509701821.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:01.444Z,1509701821.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:01.822Z,1509701821.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:01.837Z,1509701821.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:02.218Z,1509701822.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:02.233Z,1509701822.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:02.616Z,1509701822.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:02.631Z,1509701822.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:03.029Z,1509701823.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:03.044Z,1509701823.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:03.428Z,1509701823.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:03.451Z,1509701823.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:03.828Z,1509701823.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:03.844Z,1509701823.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:04.230Z,1509701824.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:04.275Z,1509701824.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:04.616Z,1509701824.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:04.632Z,1509701824.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:05.028Z,1509701825.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:05.047Z,1509701825.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:05.429Z,1509701825.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:05.445Z,1509701825.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:05.828Z,1509701825.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:05.843Z,1509701825.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:06.231Z,1509701826.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:06.285Z,1509701826.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:06.620Z,1509701826.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:06.636Z,1509701826.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:07.029Z,1509701827.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:07.044Z,1509701827.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:07.429Z,1509701827.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:07.444Z,1509701827.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:07.830Z,1509701827.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:07.914Z,1509701827.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:08.210Z,1509701828.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:08.246Z,1509701828.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:08.611Z,1509701828.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:08.663Z,1509701828.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:09.022Z,1509701829.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:09.049Z,1509701829.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:09.421Z,1509701829.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:09.484Z,1509701829.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:09.818Z,1509701829.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:09.887Z,1509701829.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:10.211Z,1509701830.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:10.243Z,1509701830.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:10.611Z,1509701830.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:10.627Z,1509701830.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:11.021Z,1509701831.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:11.046Z,1509701831.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:11.421Z,1509701831.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:11.447Z,1509701831.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:11.825Z,1509701831.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:11.848Z,1509701831.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:12.209Z,1509701832.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:12.224Z,1509701832.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:12.608Z,1509701832.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:12.623Z,1509701832.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:13.021Z,1509701833.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:13.045Z,1509701833.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:13.421Z,1509701833.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:13.446Z,1509701833.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:13.840Z,1509701833.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:13.855Z,1509701833.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:14.209Z,1509701834.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:14.224Z,1509701834.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:14.616Z,1509701834.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:14.650Z,1509701834.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:15.008Z,1509701835.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:15.024Z,1509701835.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:15.421Z,1509701835.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:15.446Z,1509701835.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:15.821Z,1509701835.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:15.876Z,1509701835.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:16.221Z,1509701836.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:16.253Z,1509701836.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:16.612Z,1509701836.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:16.627Z,1509701836.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:17.011Z,1509701837.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:17.026Z,1509701837.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:17.413Z,1509701837.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:17.429Z,1509701837.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:17.812Z,1509701837.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:17.827Z,1509701837.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:18.249Z,1509701838.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:18.269Z,1509701838.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:18.626Z,1509701838.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:18.656Z,1509701838.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:19.030Z,1509701839.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:19.051Z,1509701839.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:19.412Z,1509701839.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:19.428Z,1509701839.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:19.816Z,1509701839.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:19.831Z,1509701839.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:19.835Z,1509701839.835 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T09:32:19.5Z
2017-11-03T09:37:19.835Z,1509701839.835 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T09:37:19.835Z,1509701839.835 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T09:37:20.226Z,1509701840.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:20.268Z,1509701840.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:20.726Z,1509701840.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:20.761Z,1509701840.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:21.030Z,1509701841.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:21.059Z,1509701841.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:24.347Z,1509701844.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:24.431Z,1509701844.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:24.529Z,1509701844.529 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0220.lzma
2017-11-03T09:37:24.575Z,1509701844.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:24.607Z,1509701844.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:24.964Z,1509701844.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:24.979Z,1509701844.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:25.336Z,1509701845.336 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0220.lzma.bak
2017-11-03T09:37:25.336Z,1509701845.336 [DataOverHttps](INFO): SBD MOMSN=5183250
2017-11-03T09:37:25.375Z,1509701845.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:25.419Z,1509701845.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:25.981Z,1509701845.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:26.018Z,1509701846.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:26.178Z,1509701846.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:26.227Z,1509701846.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:29.426Z,1509701849.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:29.476Z,1509701849.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:29.621Z,1509701849.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:29.677Z,1509701849.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:29.995Z,1509701849.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:30.039Z,1509701850.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:30.410Z,1509701850.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:30.423Z,1509701850.423 [PNI_TCM](ERROR): CRC does not match. Expected:0x11310 got:0x6210
2017-11-03T09:37:30.464Z,1509701850.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:30.809Z,1509701850.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:30.825Z,1509701850.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:31.221Z,1509701851.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:31.236Z,1509701851.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:34.515Z,1509701854.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:34.531Z,1509701854.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:34.630Z,1509701854.630 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20171103T001125/Express0221.lzma
2017-11-03T09:37:34.679Z,1509701854.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:34.718Z,1509701854.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:35.058Z,1509701855.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:35.077Z,1509701855.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:35.423Z,1509701855.423 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0221.lzma.bak
2017-11-03T09:37:35.423Z,1509701855.423 [DataOverHttps](INFO): SBD MOMSN=5183252
2017-11-03T09:37:35.468Z,1509701855.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:35.483Z,1509701855.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:36.070Z,1509701856.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:36.086Z,1509701856.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:36.089Z,1509701856.089 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T09:37:36.089Z,1509701856.089 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T09:37:36.089Z,1509701856.089 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T09:37:36.269Z,1509701856.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:36.313Z,1509701856.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:39.478Z,1509701859.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:39.494Z,1509701859.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:39.686Z,1509701859.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:39.726Z,1509701859.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:40.034Z,1509701860.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:40.049Z,1509701860.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:40.435Z,1509701860.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:40.450Z,1509701860.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:40.833Z,1509701860.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:40.849Z,1509701860.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:41.249Z,1509701861.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:41.299Z,1509701861.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:41.645Z,1509701861.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:41.745Z,1509701861.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:42.044Z,1509701862.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:42.059Z,1509701862.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:42.436Z,1509701862.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:42.491Z,1509701862.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:42.839Z,1509701862.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:42.854Z,1509701862.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:43.238Z,1509701863.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:43.287Z,1509701863.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:43.636Z,1509701863.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:43.691Z,1509701863.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:43.924Z,1509701863.924 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:37:43.929Z,1509701863.929 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T09:37:43.929Z,1509701863.929 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:37:44.057Z,1509701864.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:44.087Z,1509701864.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:37:44.088Z,1509701864.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:44.180Z,1509701864.180 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:37:44.332Z,1509701864.332 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:37:44.448Z,1509701864.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:44.495Z,1509701864.495 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:37:44.497Z,1509701864.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:37:44.499Z,1509701864.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:44.844Z,1509701864.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:44.860Z,1509701864.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:37:44.861Z,1509701864.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:45.241Z,1509701865.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:45.256Z,1509701865.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:37:45.257Z,1509701865.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:45.638Z,1509701865.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:45.653Z,1509701865.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:37:45.654Z,1509701865.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:45.729Z,1509701865.729 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:37:45.729Z,1509701865.729 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T09:37:46.046Z,1509701866.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:46.061Z,1509701866.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:37:46.062Z,1509701866.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:46.109Z,1509701866.109 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:37:46.109Z,1509701866.109 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:37:46.109Z,1509701866.109 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:37:46.109Z,1509701866.109 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:37:46.445Z,1509701866.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:46.459Z,1509701866.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:37:46.460Z,1509701866.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:46.846Z,1509701866.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:46.860Z,1509701866.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:37:46.861Z,1509701866.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:47.238Z,1509701867.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:47.258Z,1509701867.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:37:47.259Z,1509701867.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:47.641Z,1509701867.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:47.656Z,1509701867.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:37:47.657Z,1509701867.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:48.046Z,1509701868.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:48.061Z,1509701868.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:37:48.062Z,1509701868.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:48.444Z,1509701868.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:48.459Z,1509701868.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:37:48.461Z,1509701868.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:48.845Z,1509701868.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:48.860Z,1509701868.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:37:48.861Z,1509701868.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:49.235Z,1509701869.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:49.251Z,1509701869.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:37:49.252Z,1509701869.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:49.638Z,1509701869.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:49.653Z,1509701869.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:37:49.654Z,1509701869.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:50.045Z,1509701870.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:50.061Z,1509701870.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:37:50.062Z,1509701870.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:50.239Z,1509701870.239 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:37:50.299Z,1509701870.299 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:37:50.300Z,1509701870.300 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:37:50.301Z,1509701870.301 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:37:50.301Z,1509701870.301 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:37:50.465Z,1509701870.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:50.490Z,1509701870.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:37:50.491Z,1509701870.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:50.855Z,1509701870.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:50.873Z,1509701870.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:51.247Z,1509701871.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:51.262Z,1509701871.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:51.638Z,1509701871.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:51.654Z,1509701871.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:52.049Z,1509701872.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:52.065Z,1509701872.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:52.455Z,1509701872.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:52.471Z,1509701872.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:52.850Z,1509701872.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:52.865Z,1509701872.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:53.230Z,1509701873.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:53.257Z,1509701873.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:53.667Z,1509701873.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:53.713Z,1509701873.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:54.054Z,1509701874.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:54.069Z,1509701874.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:54.442Z,1509701874.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:54.469Z,1509701874.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:54.842Z,1509701874.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:54.869Z,1509701874.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:55.230Z,1509701875.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:55.266Z,1509701875.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:55.669Z,1509701875.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:55.713Z,1509701875.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:56.046Z,1509701876.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:56.142Z,1509701876.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:56.441Z,1509701876.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:56.475Z,1509701876.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:56.841Z,1509701876.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:56.899Z,1509701876.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:57.232Z,1509701877.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:57.247Z,1509701877.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:57.700Z,1509701877.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:57.767Z,1509701877.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:58.045Z,1509701878.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:58.099Z,1509701878.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:58.441Z,1509701878.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:58.467Z,1509701878.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:58.842Z,1509701878.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:58.865Z,1509701878.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:59.233Z,1509701879.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:59.248Z,1509701879.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:37:59.686Z,1509701879.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:37:59.729Z,1509701879.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:00.046Z,1509701880.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:00.075Z,1509701880.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:00.442Z,1509701880.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:00.465Z,1509701880.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:00.845Z,1509701880.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:00.879Z,1509701880.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:01.233Z,1509701881.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:01.265Z,1509701881.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:01.635Z,1509701881.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:01.696Z,1509701881.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:02.042Z,1509701882.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:02.063Z,1509701882.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:02.442Z,1509701882.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:02.457Z,1509701882.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:02.842Z,1509701882.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:02.857Z,1509701882.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:03.225Z,1509701883.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:03.240Z,1509701883.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:03.623Z,1509701883.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:03.639Z,1509701883.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:04.041Z,1509701884.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:04.057Z,1509701884.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:04.442Z,1509701884.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:04.457Z,1509701884.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:04.839Z,1509701884.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:04.854Z,1509701884.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:05.234Z,1509701885.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:05.249Z,1509701885.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:05.630Z,1509701885.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:05.646Z,1509701885.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:06.042Z,1509701886.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:06.057Z,1509701886.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:06.442Z,1509701886.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:06.457Z,1509701886.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:06.842Z,1509701886.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:06.862Z,1509701886.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:07.231Z,1509701887.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:07.246Z,1509701887.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:07.637Z,1509701887.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:07.659Z,1509701887.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:08.042Z,1509701888.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:08.058Z,1509701888.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:08.447Z,1509701888.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:08.483Z,1509701888.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:08.842Z,1509701888.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:08.863Z,1509701888.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:09.230Z,1509701889.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:09.245Z,1509701889.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:09.634Z,1509701889.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:09.658Z,1509701889.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:10.042Z,1509701890.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:10.083Z,1509701890.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:10.445Z,1509701890.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:10.487Z,1509701890.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:10.842Z,1509701890.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:10.857Z,1509701890.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:11.231Z,1509701891.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:11.302Z,1509701891.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:11.638Z,1509701891.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:11.730Z,1509701891.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:12.050Z,1509701892.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:12.071Z,1509701892.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:12.442Z,1509701892.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:12.498Z,1509701892.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:12.838Z,1509701892.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:12.876Z,1509701892.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:13.242Z,1509701893.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:13.260Z,1509701893.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:13.682Z,1509701893.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:13.742Z,1509701893.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:14.041Z,1509701894.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:14.067Z,1509701894.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:14.451Z,1509701894.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:14.467Z,1509701894.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:14.848Z,1509701894.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:14.863Z,1509701894.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:15.234Z,1509701895.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:15.261Z,1509701895.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:15.629Z,1509701895.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:15.644Z,1509701895.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:16.042Z,1509701896.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:16.057Z,1509701896.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:16.453Z,1509701896.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:16.483Z,1509701896.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:16.850Z,1509701896.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:16.881Z,1509701896.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:17.236Z,1509701897.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:17.251Z,1509701897.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:17.635Z,1509701897.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:17.650Z,1509701897.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:18.053Z,1509701898.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:18.083Z,1509701898.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:18.449Z,1509701898.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:18.481Z,1509701898.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:18.849Z,1509701898.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:18.864Z,1509701898.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:19.237Z,1509701899.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:19.252Z,1509701899.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:19.670Z,1509701899.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:19.695Z,1509701899.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:20.041Z,1509701900.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:20.062Z,1509701900.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:20.442Z,1509701900.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:20.457Z,1509701900.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:20.842Z,1509701900.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:20.857Z,1509701900.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:21.243Z,1509701901.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:21.258Z,1509701901.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:21.637Z,1509701901.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:21.653Z,1509701901.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:22.042Z,1509701902.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:22.057Z,1509701902.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:22.441Z,1509701902.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:22.462Z,1509701902.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:22.846Z,1509701902.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:22.861Z,1509701902.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:23.237Z,1509701903.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:23.256Z,1509701903.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:23.672Z,1509701903.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:23.695Z,1509701903.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:24.042Z,1509701904.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:24.057Z,1509701904.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:24.446Z,1509701904.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:24.461Z,1509701904.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:24.880Z,1509701904.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:24.902Z,1509701904.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:25.239Z,1509701905.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:25.323Z,1509701905.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:25.663Z,1509701905.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:25.718Z,1509701905.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:26.043Z,1509701906.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:26.084Z,1509701906.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:26.439Z,1509701906.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:26.456Z,1509701906.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:26.836Z,1509701906.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:26.894Z,1509701906.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:27.245Z,1509701907.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:27.302Z,1509701907.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:27.695Z,1509701907.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:27.716Z,1509701907.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:28.044Z,1509701908.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:28.060Z,1509701908.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:28.438Z,1509701908.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:28.453Z,1509701908.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:28.839Z,1509701908.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:28.863Z,1509701908.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:29.239Z,1509701909.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:29.267Z,1509701909.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:29.637Z,1509701909.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:29.702Z,1509701909.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:30.053Z,1509701910.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:30.075Z,1509701910.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:30.448Z,1509701910.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:30.555Z,1509701910.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:30.853Z,1509701910.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:30.875Z,1509701910.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:31.232Z,1509701911.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:31.259Z,1509701911.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:31.628Z,1509701911.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:31.659Z,1509701911.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:32.061Z,1509701912.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:32.077Z,1509701912.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:32.446Z,1509701912.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:32.465Z,1509701912.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:32.849Z,1509701912.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:32.865Z,1509701912.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:33.233Z,1509701913.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:33.263Z,1509701913.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:33.632Z,1509701913.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:33.659Z,1509701913.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:34.050Z,1509701914.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:34.065Z,1509701914.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:34.451Z,1509701914.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:34.467Z,1509701914.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:34.851Z,1509701914.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:34.867Z,1509701914.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:35.230Z,1509701915.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:35.257Z,1509701915.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:35.632Z,1509701915.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:35.659Z,1509701915.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:36.049Z,1509701916.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:36.071Z,1509701916.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:36.450Z,1509701916.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:36.485Z,1509701916.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:36.854Z,1509701916.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:36.869Z,1509701916.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:40.115Z,1509701920.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:40.186Z,1509701920.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:40.323Z,1509701920.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:40.363Z,1509701920.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:40.749Z,1509701920.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:40.764Z,1509701920.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:41.133Z,1509701921.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:41.209Z,1509701921.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:41.534Z,1509701921.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:41.557Z,1509701921.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:41.922Z,1509701921.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:41.971Z,1509701921.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:42.330Z,1509701922.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:42.382Z,1509701922.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:42.729Z,1509701922.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:42.744Z,1509701922.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:43.137Z,1509701923.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:43.155Z,1509701923.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:43.537Z,1509701923.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:43.553Z,1509701923.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:43.950Z,1509701923.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:43.972Z,1509701923.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:44.329Z,1509701924.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:44.351Z,1509701924.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:44.725Z,1509701924.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:44.740Z,1509701924.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:45.128Z,1509701925.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:45.143Z,1509701925.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:45.526Z,1509701925.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:45.540Z,1509701925.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:45.948Z,1509701925.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:45.980Z,1509701925.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:46.333Z,1509701926.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:46.355Z,1509701926.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:46.734Z,1509701926.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:46.749Z,1509701926.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:47.132Z,1509701927.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:47.148Z,1509701927.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:47.528Z,1509701927.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:47.544Z,1509701927.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:47.930Z,1509701927.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:47.946Z,1509701927.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:48.328Z,1509701928.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:48.343Z,1509701928.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:48.730Z,1509701928.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:48.745Z,1509701928.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:49.137Z,1509701929.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:49.153Z,1509701929.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:49.534Z,1509701929.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:49.549Z,1509701929.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:49.933Z,1509701929.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:49.949Z,1509701929.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:50.332Z,1509701930.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:50.355Z,1509701930.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:50.726Z,1509701930.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:50.741Z,1509701930.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:51.131Z,1509701931.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:51.146Z,1509701931.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:51.531Z,1509701931.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:51.551Z,1509701931.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:51.930Z,1509701931.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:51.951Z,1509701931.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:52.333Z,1509701932.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:52.349Z,1509701932.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:52.734Z,1509701932.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:52.750Z,1509701932.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:53.135Z,1509701933.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:53.150Z,1509701933.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:53.528Z,1509701933.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:53.537Z,1509701933.537 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T09:38:53.537Z,1509701933.537 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:38:53.537Z,1509701933.537 [BPC1](ERROR): Data Fault
2017-11-03T09:38:53.546Z,1509701933.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:53.656Z,1509701933.656 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:38:53.919Z,1509701933.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:53.948Z,1509701933.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:54.324Z,1509701934.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:54.350Z,1509701934.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:54.720Z,1509701934.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:54.751Z,1509701934.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:54.836Z,1509701934.836 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:38:54.837Z,1509701934.837 [BPC1] No Fault, FailCount= 1
2017-11-03T09:38:55.145Z,1509701935.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:55.208Z,1509701935.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:55.538Z,1509701935.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:55.554Z,1509701935.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:55.937Z,1509701935.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:55.996Z,1509701935.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:56.321Z,1509701936.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:56.352Z,1509701936.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:56.723Z,1509701936.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:56.749Z,1509701936.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:57.120Z,1509701937.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:57.150Z,1509701937.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:57.523Z,1509701937.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:57.549Z,1509701937.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:57.915Z,1509701937.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:57.950Z,1509701937.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:58.341Z,1509701938.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:58.357Z,1509701938.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:58.742Z,1509701938.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:58.762Z,1509701938.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:59.129Z,1509701939.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:59.163Z,1509701939.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:59.517Z,1509701939.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:59.532Z,1509701939.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:38:59.965Z,1509701939.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:38:59.980Z,1509701939.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:00.318Z,1509701940.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:00.335Z,1509701940.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:00.721Z,1509701940.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:00.737Z,1509701940.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:01.135Z,1509701941.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:01.166Z,1509701941.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:01.534Z,1509701941.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:01.565Z,1509701941.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:01.935Z,1509701941.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:01.962Z,1509701941.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:02.328Z,1509701942.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:02.347Z,1509701942.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:02.724Z,1509701942.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:02.741Z,1509701942.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:03.124Z,1509701943.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:03.140Z,1509701943.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:03.524Z,1509701943.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:03.540Z,1509701943.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:03.920Z,1509701943.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:03.935Z,1509701943.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:04.346Z,1509701944.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:04.371Z,1509701944.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:04.737Z,1509701944.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:04.771Z,1509701944.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:05.137Z,1509701945.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:05.170Z,1509701945.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:05.523Z,1509701945.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:05.538Z,1509701945.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:05.919Z,1509701945.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:05.954Z,1509701945.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:06.323Z,1509701946.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:06.354Z,1509701946.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:06.716Z,1509701946.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:06.731Z,1509701946.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:07.142Z,1509701947.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:07.157Z,1509701947.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:07.545Z,1509701947.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:07.560Z,1509701947.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:07.937Z,1509701947.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:08.030Z,1509701948.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:08.329Z,1509701948.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:08.345Z,1509701948.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:08.728Z,1509701948.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:08.775Z,1509701948.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:09.127Z,1509701949.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:09.142Z,1509701949.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:09.529Z,1509701949.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:09.575Z,1509701949.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:09.922Z,1509701949.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:09.953Z,1509701949.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:10.340Z,1509701950.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:10.391Z,1509701950.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:10.741Z,1509701950.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:10.756Z,1509701950.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:11.141Z,1509701951.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:11.157Z,1509701951.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:11.531Z,1509701951.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:11.546Z,1509701951.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:11.940Z,1509701951.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:11.956Z,1509701951.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:12.330Z,1509701952.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:12.345Z,1509701952.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:12.731Z,1509701952.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:12.746Z,1509701952.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:13.145Z,1509701953.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:13.161Z,1509701953.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:13.538Z,1509701953.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:13.553Z,1509701953.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:13.979Z,1509701953.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:13.994Z,1509701953.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:14.331Z,1509701954.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:14.347Z,1509701954.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:14.731Z,1509701954.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:14.751Z,1509701954.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:15.131Z,1509701955.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:15.151Z,1509701955.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:15.533Z,1509701955.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:15.548Z,1509701955.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:15.548Z,1509701955.548 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 188
2017-11-03T09:39:15.548Z,1509701955.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:39:15.550Z,1509701955.550 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:15.550Z,1509701955.550 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 188
2017-11-03T09:39:15.550Z,1509701955.550 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:39:15.553Z,1509701955.553 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:15.553Z,1509701955.553 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 188
2017-11-03T09:39:15.553Z,1509701955.553 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:39:15.633Z,1509701955.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:39:15.633Z,1509701955.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:39:15.633Z,1509701955.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:39:15.919Z,1509701955.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:16.040Z,1509701956.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:39:16.041Z,1509701956.041 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 188
2017-11-03T09:39:16.041Z,1509701956.041 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:39:16.041Z,1509701956.041 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 188
2017-11-03T09:39:16.042Z,1509701956.042 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:39:16.042Z,1509701956.042 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 188
2017-11-03T09:39:16.329Z,1509701956.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:16.362Z,1509701956.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:39:16.362Z,1509701956.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:39:16.362Z,1509701956.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:39:16.363Z,1509701956.363 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:39:16.363Z,1509701956.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:39:16.364Z,1509701956.364 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:39:16.364Z,1509701956.364 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:39:16.364Z,1509701956.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:39:16.365Z,1509701956.365 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:39:16.733Z,1509701956.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:16.767Z,1509701956.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:17.129Z,1509701957.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:17.156Z,1509701957.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:17.523Z,1509701957.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:17.561Z,1509701957.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:17.934Z,1509701957.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:17.977Z,1509701957.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:18.332Z,1509701958.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:18.355Z,1509701958.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:18.723Z,1509701958.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:18.754Z,1509701958.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:19.144Z,1509701959.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:19.160Z,1509701959.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:19.533Z,1509701959.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:19.563Z,1509701959.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:19.951Z,1509701959.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:19.971Z,1509701959.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:20.323Z,1509701960.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:20.339Z,1509701960.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:20.720Z,1509701960.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:20.735Z,1509701960.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:21.119Z,1509701961.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:21.134Z,1509701961.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:21.520Z,1509701961.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:21.535Z,1509701961.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:21.924Z,1509701961.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:21.963Z,1509701961.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:22.337Z,1509701962.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:22.439Z,1509701962.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:22.737Z,1509701962.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:22.773Z,1509701962.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:23.142Z,1509701963.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:23.170Z,1509701963.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:23.526Z,1509701963.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:23.566Z,1509701963.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:23.922Z,1509701963.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:23.954Z,1509701963.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:24.331Z,1509701964.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:24.383Z,1509701964.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:24.728Z,1509701964.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:24.746Z,1509701964.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:25.141Z,1509701965.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:25.190Z,1509701965.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:25.540Z,1509701965.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:25.555Z,1509701965.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:25.942Z,1509701965.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:25.957Z,1509701965.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:26.329Z,1509701966.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:26.345Z,1509701966.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:26.731Z,1509701966.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:26.746Z,1509701966.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:27.128Z,1509701967.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:27.150Z,1509701967.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:27.530Z,1509701967.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:27.546Z,1509701967.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:27.955Z,1509701967.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:27.992Z,1509701967.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:28.341Z,1509701968.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:28.356Z,1509701968.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:28.741Z,1509701968.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:28.757Z,1509701968.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:29.138Z,1509701969.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:29.153Z,1509701969.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:29.529Z,1509701969.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:29.548Z,1509701969.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:29.933Z,1509701969.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:29.948Z,1509701969.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:30.316Z,1509701970.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:30.343Z,1509701970.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:30.730Z,1509701970.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:30.746Z,1509701970.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:31.142Z,1509701971.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:31.157Z,1509701971.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:31.538Z,1509701971.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:31.553Z,1509701971.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:31.941Z,1509701971.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:31.956Z,1509701971.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:32.319Z,1509701972.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:32.347Z,1509701972.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:32.730Z,1509701972.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:32.752Z,1509701972.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:33.120Z,1509701973.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:33.145Z,1509701973.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:33.532Z,1509701973.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:33.548Z,1509701973.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:33.939Z,1509701973.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:33.960Z,1509701973.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:34.341Z,1509701974.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:34.356Z,1509701974.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:34.744Z,1509701974.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:34.760Z,1509701974.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:35.141Z,1509701975.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:35.156Z,1509701975.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:35.530Z,1509701975.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:35.545Z,1509701975.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:35.935Z,1509701975.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:35.961Z,1509701975.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:36.321Z,1509701976.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:36.337Z,1509701976.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:36.727Z,1509701976.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:36.759Z,1509701976.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:37.134Z,1509701977.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:37.230Z,1509701977.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:40.419Z,1509701980.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:40.443Z,1509701980.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:40.618Z,1509701980.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:40.657Z,1509701980.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:40.995Z,1509701980.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:41.023Z,1509701981.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:41.396Z,1509701981.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:41.459Z,1509701981.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:41.793Z,1509701981.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:41.821Z,1509701981.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:42.225Z,1509701982.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:42.279Z,1509701982.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:42.605Z,1509701982.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:42.651Z,1509701982.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:43.005Z,1509701983.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:43.035Z,1509701983.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:43.393Z,1509701983.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:43.408Z,1509701983.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:43.793Z,1509701983.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:43.809Z,1509701983.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:44.243Z,1509701984.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:44.260Z,1509701984.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:44.593Z,1509701984.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:44.608Z,1509701984.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:45.005Z,1509701985.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:45.037Z,1509701985.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:45.405Z,1509701985.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:45.439Z,1509701985.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:45.806Z,1509701985.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:45.837Z,1509701985.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:46.230Z,1509701986.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:46.248Z,1509701986.248 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:39:46.248Z,1509701986.248 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T09:39:46.248Z,1509701986.248 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:39:46.264Z,1509701986.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:39:46.289Z,1509701986.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:46.378Z,1509701986.378 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:39:46.378Z,1509701986.378 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T09:39:46.599Z,1509701986.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:46.637Z,1509701986.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:39:46.638Z,1509701986.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:46.653Z,1509701986.653 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:39:46.789Z,1509701986.789 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:39:47.010Z,1509701987.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:47.036Z,1509701987.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:39:47.037Z,1509701987.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:47.409Z,1509701987.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:47.432Z,1509701987.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:39:47.434Z,1509701987.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:47.812Z,1509701987.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:47.845Z,1509701987.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:39:47.846Z,1509701987.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:48.201Z,1509701988.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:48.216Z,1509701988.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:39:48.217Z,1509701988.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:48.600Z,1509701988.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:48.615Z,1509701988.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:39:48.616Z,1509701988.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:49.013Z,1509701989.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:49.028Z,1509701989.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:39:49.049Z,1509701989.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:49.413Z,1509701989.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:49.445Z,1509701989.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:39:49.446Z,1509701989.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:49.806Z,1509701989.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:49.821Z,1509701989.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:39:49.822Z,1509701989.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:50.200Z,1509701990.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:50.215Z,1509701990.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:39:50.216Z,1509701990.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:50.600Z,1509701990.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:50.614Z,1509701990.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:39:50.616Z,1509701990.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:51.006Z,1509701991.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:51.021Z,1509701991.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:39:51.022Z,1509701991.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:51.405Z,1509701991.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:51.426Z,1509701991.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:39:51.427Z,1509701991.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:51.806Z,1509701991.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:51.821Z,1509701991.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:39:51.822Z,1509701991.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:52.202Z,1509701992.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:52.216Z,1509701992.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:39:52.218Z,1509701992.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:52.599Z,1509701992.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:52.614Z,1509701992.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:39:52.615Z,1509701992.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:53.014Z,1509701993.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:53.048Z,1509701993.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:39:53.049Z,1509701993.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:53.414Z,1509701993.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:53.445Z,1509701993.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:39:53.446Z,1509701993.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:53.805Z,1509701993.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:53.820Z,1509701993.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:39:53.822Z,1509701993.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:54.200Z,1509701994.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:54.291Z,1509701994.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-03T09:39:54.293Z,1509701994.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:54.602Z,1509701994.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:54.617Z,1509701994.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T09:39:54.618Z,1509701994.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:55.003Z,1509701995.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:55.017Z,1509701995.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:39:55.018Z,1509701995.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:55.409Z,1509701995.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:55.457Z,1509701995.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:39:55.459Z,1509701995.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:55.810Z,1509701995.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:55.824Z,1509701995.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:39:55.825Z,1509701995.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:56.208Z,1509701996.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:56.254Z,1509701996.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:39:56.255Z,1509701996.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:56.603Z,1509701996.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:56.654Z,1509701996.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:39:56.655Z,1509701996.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:57.004Z,1509701997.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:57.018Z,1509701997.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T09:39:57.020Z,1509701997.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:57.405Z,1509701997.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:57.419Z,1509701997.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T09:39:57.420Z,1509701997.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:57.805Z,1509701997.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:57.820Z,1509701997.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:39:57.821Z,1509701997.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:58.209Z,1509701998.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:58.224Z,1509701998.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:39:58.225Z,1509701998.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:58.608Z,1509701998.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:58.622Z,1509701998.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:39:58.623Z,1509701998.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:59.010Z,1509701999.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:59.025Z,1509701999.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:39:59.026Z,1509701999.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:59.403Z,1509701999.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:59.419Z,1509701999.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:39:59.420Z,1509701999.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:39:59.803Z,1509701999.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:39:59.818Z,1509701999.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:39:59.819Z,1509701999.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:00.205Z,1509702000.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:00.219Z,1509702000.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:40:00.221Z,1509702000.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:00.603Z,1509702000.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:00.622Z,1509702000.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:40:00.623Z,1509702000.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:01.007Z,1509702001.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:01.026Z,1509702001.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:40:01.027Z,1509702001.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:01.409Z,1509702001.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:01.424Z,1509702001.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:40:01.425Z,1509702001.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:01.809Z,1509702001.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:01.823Z,1509702001.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:40:01.825Z,1509702001.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:02.195Z,1509702002.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:02.214Z,1509702002.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:40:02.215Z,1509702002.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:02.605Z,1509702002.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:02.626Z,1509702002.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:40:02.627Z,1509702002.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:03.003Z,1509702003.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:03.018Z,1509702003.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:40:03.019Z,1509702003.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:03.409Z,1509702003.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:03.430Z,1509702003.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:40:03.431Z,1509702003.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:03.810Z,1509702003.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:03.825Z,1509702003.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:40:03.826Z,1509702003.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:04.208Z,1509702004.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:04.223Z,1509702004.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:40:04.225Z,1509702004.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:04.600Z,1509702004.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:04.614Z,1509702004.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:40:04.615Z,1509702004.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:05.005Z,1509702005.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:05.020Z,1509702005.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:40:05.021Z,1509702005.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:05.401Z,1509702005.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:05.416Z,1509702005.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:40:05.417Z,1509702005.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:05.804Z,1509702005.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:05.819Z,1509702005.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T09:40:05.820Z,1509702005.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:06.210Z,1509702006.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:06.225Z,1509702006.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:06.610Z,1509702006.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:06.625Z,1509702006.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:07.010Z,1509702007.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:07.025Z,1509702007.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:07.405Z,1509702007.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:07.421Z,1509702007.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:07.804Z,1509702007.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:07.819Z,1509702007.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:08.200Z,1509702008.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:08.216Z,1509702008.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:08.605Z,1509702008.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:08.690Z,1509702008.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:08.989Z,1509702008.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:09.019Z,1509702009.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:09.413Z,1509702009.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:09.460Z,1509702009.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:09.818Z,1509702009.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:09.866Z,1509702009.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:10.210Z,1509702010.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:10.266Z,1509702010.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:10.592Z,1509702010.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:10.657Z,1509702010.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:10.989Z,1509702010.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:11.017Z,1509702011.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:11.393Z,1509702011.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:11.418Z,1509702011.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:11.790Z,1509702011.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:11.822Z,1509702011.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:12.209Z,1509702012.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:12.223Z,1509702012.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:12.617Z,1509702012.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:12.638Z,1509702012.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:13.014Z,1509702013.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:13.034Z,1509702013.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:13.395Z,1509702013.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:13.421Z,1509702013.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:13.789Z,1509702013.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:13.822Z,1509702013.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:14.188Z,1509702014.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:14.222Z,1509702014.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:14.589Z,1509702014.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:14.617Z,1509702014.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:14.995Z,1509702014.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:15.021Z,1509702015.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:15.414Z,1509702015.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:15.428Z,1509702015.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:15.810Z,1509702015.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:15.825Z,1509702015.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:16.209Z,1509702016.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:16.225Z,1509702016.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:16.588Z,1509702016.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:16.617Z,1509702016.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:16.988Z,1509702016.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:17.018Z,1509702017.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:17.396Z,1509702017.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:17.421Z,1509702017.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:17.793Z,1509702017.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:17.822Z,1509702017.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:18.217Z,1509702018.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:18.232Z,1509702018.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:18.607Z,1509702018.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:18.627Z,1509702018.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:19.012Z,1509702019.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:19.027Z,1509702019.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:19.395Z,1509702019.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:19.421Z,1509702019.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:19.789Z,1509702019.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:19.817Z,1509702019.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:20.195Z,1509702020.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:20.221Z,1509702020.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:20.589Z,1509702020.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:20.617Z,1509702020.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:21.017Z,1509702021.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:21.032Z,1509702021.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:21.417Z,1509702021.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:21.438Z,1509702021.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:21.810Z,1509702021.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:21.825Z,1509702021.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:22.205Z,1509702022.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:22.263Z,1509702022.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:22.592Z,1509702022.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:22.625Z,1509702022.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:23.009Z,1509702023.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:23.043Z,1509702023.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:23.413Z,1509702023.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:23.428Z,1509702023.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:23.809Z,1509702023.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:23.824Z,1509702023.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:24.196Z,1509702024.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:24.265Z,1509702024.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:24.593Z,1509702024.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:24.621Z,1509702024.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:25.012Z,1509702025.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:25.051Z,1509702025.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:25.410Z,1509702025.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:25.447Z,1509702025.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:25.813Z,1509702025.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:25.829Z,1509702025.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:26.195Z,1509702026.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:26.220Z,1509702026.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:26.595Z,1509702026.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:26.620Z,1509702026.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:27.013Z,1509702027.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:27.028Z,1509702027.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:27.413Z,1509702027.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:27.434Z,1509702027.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:27.810Z,1509702027.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:27.825Z,1509702027.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:28.193Z,1509702028.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:28.221Z,1509702028.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:28.593Z,1509702028.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:28.620Z,1509702028.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:28.995Z,1509702028.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:29.020Z,1509702029.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:29.413Z,1509702029.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:29.428Z,1509702029.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:29.814Z,1509702029.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:29.834Z,1509702029.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:30.217Z,1509702030.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:30.232Z,1509702030.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:30.593Z,1509702030.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:30.620Z,1509702030.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:30.993Z,1509702030.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:31.021Z,1509702031.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:31.389Z,1509702031.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:31.422Z,1509702031.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:31.793Z,1509702031.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:31.820Z,1509702031.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:32.213Z,1509702032.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:32.229Z,1509702032.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:32.617Z,1509702032.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:32.632Z,1509702032.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:33.017Z,1509702033.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:33.033Z,1509702033.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:33.392Z,1509702033.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:33.421Z,1509702033.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:33.795Z,1509702033.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:33.822Z,1509702033.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:34.193Z,1509702034.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:34.221Z,1509702034.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:34.596Z,1509702034.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:34.622Z,1509702034.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:34.992Z,1509702034.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:35.028Z,1509702035.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:35.414Z,1509702035.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:35.429Z,1509702035.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:35.814Z,1509702035.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:35.829Z,1509702035.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:36.214Z,1509702036.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:36.230Z,1509702036.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:36.594Z,1509702036.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:36.629Z,1509702036.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:36.995Z,1509702036.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:37.026Z,1509702037.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:37.401Z,1509702037.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:37.426Z,1509702037.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:40.481Z,1509702040.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:40.528Z,1509702040.528 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:40:40.528Z,1509702040.528 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:40:40.528Z,1509702040.528 [BPC1](ERROR): Communications Fault
2017-11-03T09:40:40.569Z,1509702040.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:40.666Z,1509702040.666 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:40:40.730Z,1509702040.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:40.773Z,1509702040.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:41.118Z,1509702041.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:41.133Z,1509702041.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:41.525Z,1509702041.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:41.540Z,1509702041.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:41.617Z,1509702041.617 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:40:41.617Z,1509702041.617 [BPC1] No Fault, FailCount= 1
2017-11-03T09:40:41.903Z,1509702041.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:41.972Z,1509702041.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:42.297Z,1509702042.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:42.348Z,1509702042.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:42.701Z,1509702042.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:42.771Z,1509702042.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:43.121Z,1509702043.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:43.136Z,1509702043.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:43.525Z,1509702043.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:43.540Z,1509702043.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:43.921Z,1509702043.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:43.936Z,1509702043.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:44.301Z,1509702044.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:44.331Z,1509702044.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:44.697Z,1509702044.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:44.731Z,1509702044.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:45.102Z,1509702045.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:45.128Z,1509702045.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:45.502Z,1509702045.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:45.528Z,1509702045.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:45.900Z,1509702045.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:45.930Z,1509702045.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:46.322Z,1509702046.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:46.337Z,1509702046.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:46.722Z,1509702046.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:46.737Z,1509702046.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:47.118Z,1509702047.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:47.133Z,1509702047.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:47.501Z,1509702047.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:47.528Z,1509702047.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:47.901Z,1509702047.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:47.932Z,1509702047.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:48.303Z,1509702048.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:48.335Z,1509702048.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:48.701Z,1509702048.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:48.736Z,1509702048.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:49.121Z,1509702049.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:49.143Z,1509702049.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:49.525Z,1509702049.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:49.541Z,1509702049.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:49.925Z,1509702049.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:49.941Z,1509702049.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:50.301Z,1509702050.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:50.331Z,1509702050.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:50.696Z,1509702050.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:50.711Z,1509702050.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:51.101Z,1509702051.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:51.116Z,1509702051.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:51.505Z,1509702051.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:51.520Z,1509702051.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:51.903Z,1509702051.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:51.918Z,1509702051.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:52.313Z,1509702052.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:52.339Z,1509702052.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:52.713Z,1509702052.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:52.741Z,1509702052.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:53.113Z,1509702053.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:53.139Z,1509702053.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:53.504Z,1509702053.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:53.544Z,1509702053.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:53.903Z,1509702053.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:53.918Z,1509702053.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:54.301Z,1509702054.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:54.316Z,1509702054.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:54.701Z,1509702054.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:54.754Z,1509702054.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:55.113Z,1509702055.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:55.145Z,1509702055.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:55.513Z,1509702055.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:55.559Z,1509702055.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:55.914Z,1509702055.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:55.963Z,1509702055.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:56.301Z,1509702056.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:56.317Z,1509702056.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:56.700Z,1509702056.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:56.716Z,1509702056.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:57.100Z,1509702057.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:57.116Z,1509702057.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:57.501Z,1509702057.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:57.517Z,1509702057.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:57.900Z,1509702057.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:57.923Z,1509702057.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:58.313Z,1509702058.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:58.344Z,1509702058.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:58.717Z,1509702058.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:58.743Z,1509702058.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:59.117Z,1509702059.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:59.145Z,1509702059.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:59.500Z,1509702059.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:59.515Z,1509702059.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:40:59.903Z,1509702059.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:40:59.918Z,1509702059.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:00.300Z,1509702060.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:00.315Z,1509702060.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:00.700Z,1509702060.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:00.715Z,1509702060.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:01.113Z,1509702061.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:01.145Z,1509702061.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:01.513Z,1509702061.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:01.545Z,1509702061.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:01.914Z,1509702061.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:01.945Z,1509702061.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:02.304Z,1509702062.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:02.319Z,1509702062.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:02.699Z,1509702062.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:02.715Z,1509702062.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:03.100Z,1509702063.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:03.115Z,1509702063.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:03.501Z,1509702063.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:03.516Z,1509702063.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:03.899Z,1509702063.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:03.914Z,1509702063.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:04.313Z,1509702064.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:04.344Z,1509702064.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:04.713Z,1509702064.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:04.744Z,1509702064.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:05.113Z,1509702065.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:05.144Z,1509702065.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:05.503Z,1509702065.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:05.519Z,1509702065.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:05.904Z,1509702065.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:05.919Z,1509702065.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:06.300Z,1509702066.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:06.370Z,1509702066.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:06.700Z,1509702066.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:06.723Z,1509702066.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:07.117Z,1509702067.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:07.161Z,1509702067.161 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T09:41:07.161Z,1509702067.161 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:41:07.161Z,1509702067.161 [BPC1](ERROR): Data Fault
2017-11-03T09:41:07.187Z,1509702067.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:07.273Z,1509702067.273 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:41:07.515Z,1509702067.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:07.550Z,1509702067.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:07.912Z,1509702067.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:07.927Z,1509702067.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:08.308Z,1509702068.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:08.332Z,1509702068.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:08.438Z,1509702068.438 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:41:08.438Z,1509702068.438 [BPC1] No Fault, FailCount= 1
2017-11-03T09:41:08.709Z,1509702068.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:08.807Z,1509702068.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:09.122Z,1509702069.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:09.176Z,1509702069.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:09.522Z,1509702069.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:09.591Z,1509702069.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:09.909Z,1509702069.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:09.962Z,1509702069.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:10.325Z,1509702070.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:10.377Z,1509702070.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:10.720Z,1509702070.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:10.735Z,1509702070.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:11.134Z,1509702071.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:11.169Z,1509702071.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:11.497Z,1509702071.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:11.522Z,1509702071.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:11.899Z,1509702071.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:11.931Z,1509702071.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:12.310Z,1509702072.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:12.336Z,1509702072.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:12.714Z,1509702072.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:12.758Z,1509702072.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:13.116Z,1509702073.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:13.171Z,1509702073.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:13.522Z,1509702073.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:13.562Z,1509702073.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:13.922Z,1509702073.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:13.966Z,1509702073.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:14.336Z,1509702074.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:14.384Z,1509702074.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:14.701Z,1509702074.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:14.743Z,1509702074.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:15.101Z,1509702075.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:15.144Z,1509702075.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:15.502Z,1509702075.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:15.552Z,1509702075.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:15.901Z,1509702075.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:15.958Z,1509702075.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:16.319Z,1509702076.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:16.347Z,1509702076.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:16.739Z,1509702076.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:16.763Z,1509702076.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:17.141Z,1509702077.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:17.164Z,1509702077.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:17.512Z,1509702077.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:17.557Z,1509702077.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:17.901Z,1509702077.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:17.947Z,1509702077.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:18.321Z,1509702078.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:18.378Z,1509702078.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:18.710Z,1509702078.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:18.757Z,1509702078.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:19.123Z,1509702079.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:19.158Z,1509702079.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:19.519Z,1509702079.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:19.570Z,1509702079.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:19.920Z,1509702079.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:19.955Z,1509702079.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:20.309Z,1509702080.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:20.354Z,1509702080.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:20.709Z,1509702080.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:20.775Z,1509702080.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:21.111Z,1509702081.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:21.151Z,1509702081.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:21.509Z,1509702081.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:21.551Z,1509702081.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:21.919Z,1509702081.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:21.974Z,1509702081.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:22.312Z,1509702082.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:22.354Z,1509702082.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:22.715Z,1509702082.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:22.751Z,1509702082.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:23.111Z,1509702083.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:23.150Z,1509702083.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:23.507Z,1509702083.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:23.553Z,1509702083.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:23.909Z,1509702083.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:23.924Z,1509702083.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:24.309Z,1509702084.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:24.324Z,1509702084.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:24.705Z,1509702084.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:24.714Z,1509702084.714 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:41:24.714Z,1509702084.714 [BPC1] Communications Fault, FailCount= 2
2017-11-03T09:41:24.714Z,1509702084.714 [BPC1](ERROR): Communications Fault
2017-11-03T09:41:24.722Z,1509702084.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:24.825Z,1509702084.825 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:41:25.121Z,1509702085.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:25.153Z,1509702085.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:25.522Z,1509702085.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:25.556Z,1509702085.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:25.910Z,1509702085.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:25.925Z,1509702085.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:26.021Z,1509702086.021 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:41:26.021Z,1509702086.021 [BPC1] No Fault, FailCount= 2
2017-11-03T09:41:26.308Z,1509702086.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:26.395Z,1509702086.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:26.708Z,1509702086.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:26.722Z,1509702086.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:27.107Z,1509702087.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:27.127Z,1509702087.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:27.509Z,1509702087.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:27.559Z,1509702087.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:27.908Z,1509702087.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:27.922Z,1509702087.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:28.314Z,1509702088.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:28.329Z,1509702088.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:28.713Z,1509702088.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:28.729Z,1509702088.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:29.121Z,1509702089.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:29.136Z,1509702089.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:29.505Z,1509702089.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:29.520Z,1509702089.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:29.907Z,1509702089.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:29.922Z,1509702089.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:30.309Z,1509702090.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:30.323Z,1509702090.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:30.708Z,1509702090.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:30.723Z,1509702090.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:31.121Z,1509702091.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:31.153Z,1509702091.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:31.513Z,1509702091.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:31.528Z,1509702091.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:31.914Z,1509702091.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:31.929Z,1509702091.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:32.310Z,1509702092.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:32.325Z,1509702092.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:32.710Z,1509702092.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:32.725Z,1509702092.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:33.111Z,1509702093.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:33.126Z,1509702093.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:33.511Z,1509702093.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:33.526Z,1509702093.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:33.907Z,1509702093.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:33.927Z,1509702093.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:34.314Z,1509702094.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:34.335Z,1509702094.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:34.717Z,1509702094.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:34.754Z,1509702094.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:35.118Z,1509702095.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:35.154Z,1509702095.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:35.510Z,1509702095.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:35.525Z,1509702095.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:35.911Z,1509702095.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:35.926Z,1509702095.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:36.310Z,1509702096.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:36.326Z,1509702096.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:36.711Z,1509702096.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:36.731Z,1509702096.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:37.116Z,1509702097.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:37.131Z,1509702097.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:37.518Z,1509702097.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:37.533Z,1509702097.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:40.602Z,1509702100.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:40.675Z,1509702100.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:40.832Z,1509702100.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:40.847Z,1509702100.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:41.223Z,1509702101.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:41.271Z,1509702101.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:41.619Z,1509702101.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:41.638Z,1509702101.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:42.025Z,1509702102.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:42.071Z,1509702102.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:42.425Z,1509702102.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:42.464Z,1509702102.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:42.828Z,1509702102.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:42.843Z,1509702102.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:43.224Z,1509702103.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:43.240Z,1509702103.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:43.621Z,1509702103.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:43.636Z,1509702103.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:44.022Z,1509702104.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:44.037Z,1509702104.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:44.428Z,1509702104.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:44.443Z,1509702104.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:44.826Z,1509702104.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:44.846Z,1509702104.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:45.214Z,1509702105.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:45.230Z,1509702105.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:45.608Z,1509702105.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:45.623Z,1509702105.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:46.023Z,1509702106.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:46.043Z,1509702106.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:46.419Z,1509702106.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:46.435Z,1509702106.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:46.825Z,1509702106.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:46.847Z,1509702106.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:47.210Z,1509702107.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:47.266Z,1509702107.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:47.604Z,1509702107.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:47.639Z,1509702107.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:48.022Z,1509702108.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:48.042Z,1509702108.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:48.425Z,1509702108.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:48.440Z,1509702108.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:48.826Z,1509702108.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:48.841Z,1509702108.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:49.208Z,1509702109.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:49.242Z,1509702109.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:49.611Z,1509702109.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:49.618Z,1509702109.618 [PNI_TCM](ERROR): CRC does not match. Expected:0x37056 got:0x7489
2017-11-03T09:41:49.646Z,1509702109.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:50.026Z,1509702110.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:50.041Z,1509702110.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:50.421Z,1509702110.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:50.436Z,1509702110.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:50.823Z,1509702110.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:50.842Z,1509702110.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:51.212Z,1509702111.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:51.227Z,1509702111.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:51.628Z,1509702111.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:51.643Z,1509702111.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:52.022Z,1509702112.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:52.037Z,1509702112.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:52.423Z,1509702112.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:52.466Z,1509702112.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:52.819Z,1509702112.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:52.878Z,1509702112.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:53.211Z,1509702113.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:53.259Z,1509702113.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:53.608Z,1509702113.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:53.631Z,1509702113.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:54.019Z,1509702114.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:54.059Z,1509702114.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:54.422Z,1509702114.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:54.447Z,1509702114.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:54.821Z,1509702114.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:54.879Z,1509702114.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:55.210Z,1509702115.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:55.224Z,1509702115.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:55.613Z,1509702115.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:55.666Z,1509702115.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:56.022Z,1509702116.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:56.051Z,1509702116.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:56.420Z,1509702116.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:56.454Z,1509702116.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:56.845Z,1509702116.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:56.860Z,1509702116.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:57.214Z,1509702117.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:57.246Z,1509702117.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:57.341Z,1509702117.341 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T09:41:57.610Z,1509702117.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:57.665Z,1509702117.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:58.021Z,1509702118.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:58.028Z,1509702118.028 [PNI_TCM](ERROR): CRC does not match. Expected:0x3864 got:0x0
2017-11-03T09:41:58.066Z,1509702118.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:58.425Z,1509702118.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:58.455Z,1509702118.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:58.823Z,1509702118.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:58.850Z,1509702118.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:59.211Z,1509702119.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:59.226Z,1509702119.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:41:59.610Z,1509702119.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:41:59.625Z,1509702119.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:00.021Z,1509702120.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:00.052Z,1509702120.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:00.423Z,1509702120.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:00.448Z,1509702120.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:00.822Z,1509702120.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:00.851Z,1509702120.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:01.211Z,1509702121.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:01.226Z,1509702121.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:01.613Z,1509702121.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:01.628Z,1509702121.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:02.023Z,1509702122.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:02.047Z,1509702122.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:02.435Z,1509702122.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:02.454Z,1509702122.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:02.836Z,1509702122.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:02.851Z,1509702122.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:03.214Z,1509702123.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:03.242Z,1509702123.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:03.608Z,1509702123.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:03.650Z,1509702123.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:04.022Z,1509702124.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:04.038Z,1509702124.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x32877 got:0x7489
2017-11-03T09:42:04.067Z,1509702124.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:04.422Z,1509702124.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:04.445Z,1509702124.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:04.825Z,1509702124.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:04.855Z,1509702124.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:05.211Z,1509702125.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:05.251Z,1509702125.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:05.610Z,1509702125.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:05.617Z,1509702125.617 [PNI_TCM](ERROR): CRC does not match. Expected:0x30318 got:0x7489
2017-11-03T09:42:05.658Z,1509702125.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:06.021Z,1509702126.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:06.046Z,1509702126.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:06.425Z,1509702126.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:06.529Z,1509702126.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:06.823Z,1509702126.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:06.858Z,1509702126.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:07.210Z,1509702127.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:07.262Z,1509702127.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:07.616Z,1509702127.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:07.631Z,1509702127.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:08.025Z,1509702128.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:08.071Z,1509702128.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:08.430Z,1509702128.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:08.498Z,1509702128.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:08.844Z,1509702128.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:08.859Z,1509702128.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:09.217Z,1509702129.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:09.232Z,1509702129.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:09.612Z,1509702129.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:09.627Z,1509702129.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:10.027Z,1509702130.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:10.056Z,1509702130.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:10.422Z,1509702130.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:10.456Z,1509702130.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:10.829Z,1509702130.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:10.858Z,1509702130.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:11.214Z,1509702131.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:11.229Z,1509702131.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:11.609Z,1509702131.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:11.658Z,1509702131.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:12.022Z,1509702132.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:12.029Z,1509702132.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x23805 got:0x7489
2017-11-03T09:42:12.059Z,1509702132.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:12.429Z,1509702132.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:12.455Z,1509702132.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:12.825Z,1509702132.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:12.857Z,1509702132.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:13.215Z,1509702133.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:13.231Z,1509702133.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:13.619Z,1509702133.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:13.659Z,1509702133.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:14.022Z,1509702134.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:14.058Z,1509702134.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:14.426Z,1509702134.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:14.456Z,1509702134.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:14.835Z,1509702134.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:14.860Z,1509702134.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:15.215Z,1509702135.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:15.231Z,1509702135.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:15.616Z,1509702135.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:15.631Z,1509702135.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:16.025Z,1509702136.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:16.055Z,1509702136.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:16.423Z,1509702136.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:16.455Z,1509702136.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:16.455Z,1509702136.455 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 189
2017-11-03T09:42:16.455Z,1509702136.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:42:16.461Z,1509702136.461 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:16.462Z,1509702136.462 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 189
2017-11-03T09:42:16.462Z,1509702136.462 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:42:16.464Z,1509702136.464 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:16.464Z,1509702136.464 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 189
2017-11-03T09:42:16.464Z,1509702136.464 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:42:16.557Z,1509702136.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:42:16.557Z,1509702136.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:42:16.557Z,1509702136.557 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:42:16.825Z,1509702136.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:16.932Z,1509702136.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:42:16.933Z,1509702136.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 189
2017-11-03T09:42:16.933Z,1509702136.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:42:16.933Z,1509702136.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 189
2017-11-03T09:42:16.934Z,1509702136.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:42:16.934Z,1509702136.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 189
2017-11-03T09:42:17.222Z,1509702137.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:17.236Z,1509702137.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:42:17.237Z,1509702137.237 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:42:17.237Z,1509702137.237 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:42:17.238Z,1509702137.238 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:42:17.238Z,1509702137.238 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:42:17.238Z,1509702137.238 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:42:17.239Z,1509702137.239 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:42:17.239Z,1509702137.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:42:17.239Z,1509702137.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:42:17.619Z,1509702137.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:17.638Z,1509702137.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:42:17.639Z,1509702137.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:18.023Z,1509702138.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:18.042Z,1509702138.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:42:18.043Z,1509702138.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:18.426Z,1509702138.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:18.441Z,1509702138.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:42:18.442Z,1509702138.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:18.826Z,1509702138.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:18.841Z,1509702138.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:42:18.842Z,1509702138.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:19.218Z,1509702139.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:19.303Z,1509702139.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:42:19.305Z,1509702139.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:19.619Z,1509702139.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:19.634Z,1509702139.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:42:19.635Z,1509702139.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:20.023Z,1509702140.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:20.070Z,1509702140.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:42:20.071Z,1509702140.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:20.425Z,1509702140.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:20.439Z,1509702140.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:42:20.440Z,1509702140.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:20.821Z,1509702140.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:20.870Z,1509702140.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:42:20.871Z,1509702140.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:21.220Z,1509702141.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:21.276Z,1509702141.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:42:21.277Z,1509702141.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:21.623Z,1509702141.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:21.638Z,1509702141.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:42:21.639Z,1509702141.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:22.021Z,1509702142.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:22.036Z,1509702142.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:42:22.037Z,1509702142.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:22.426Z,1509702142.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:22.441Z,1509702142.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:42:22.442Z,1509702142.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:22.823Z,1509702142.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:22.842Z,1509702142.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:42:22.843Z,1509702142.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:23.225Z,1509702143.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:23.240Z,1509702143.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:42:23.241Z,1509702143.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:23.613Z,1509702143.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:23.632Z,1509702143.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:42:23.633Z,1509702143.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:24.021Z,1509702144.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:24.042Z,1509702144.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:42:24.043Z,1509702144.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:24.422Z,1509702144.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:24.438Z,1509702144.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:42:24.439Z,1509702144.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:24.824Z,1509702144.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:24.839Z,1509702144.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T09:42:24.840Z,1509702144.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:25.220Z,1509702145.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:25.234Z,1509702145.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T09:42:25.235Z,1509702145.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:25.619Z,1509702145.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:25.633Z,1509702145.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:42:25.634Z,1509702145.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:26.023Z,1509702146.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:26.038Z,1509702146.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:42:26.039Z,1509702146.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:26.425Z,1509702146.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:26.440Z,1509702146.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:42:26.441Z,1509702146.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:26.821Z,1509702146.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:26.836Z,1509702146.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:42:26.837Z,1509702146.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:27.217Z,1509702147.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:27.238Z,1509702147.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:42:27.239Z,1509702147.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:27.620Z,1509702147.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:27.635Z,1509702147.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T09:42:27.636Z,1509702147.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:28.025Z,1509702148.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:28.039Z,1509702148.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T09:42:28.040Z,1509702148.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:28.433Z,1509702148.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:28.464Z,1509702148.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:42:28.465Z,1509702148.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:28.821Z,1509702148.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:28.842Z,1509702148.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:42:28.843Z,1509702148.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:29.222Z,1509702149.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:29.237Z,1509702149.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:42:29.238Z,1509702149.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:29.617Z,1509702149.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:29.637Z,1509702149.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:42:29.638Z,1509702149.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:30.022Z,1509702150.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:30.042Z,1509702150.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:42:30.043Z,1509702150.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:30.425Z,1509702150.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:30.440Z,1509702150.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:42:30.441Z,1509702150.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:30.824Z,1509702150.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:30.839Z,1509702150.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:42:30.840Z,1509702150.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:31.219Z,1509702151.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:31.234Z,1509702151.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:42:31.235Z,1509702151.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:31.620Z,1509702151.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:31.685Z,1509702151.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:42:31.686Z,1509702151.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:32.020Z,1509702152.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:32.086Z,1509702152.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:42:32.087Z,1509702152.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:32.427Z,1509702152.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:32.442Z,1509702152.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:42:32.443Z,1509702152.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:32.828Z,1509702152.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:32.842Z,1509702152.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:42:32.843Z,1509702152.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:33.221Z,1509702153.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:33.277Z,1509702153.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:42:33.278Z,1509702153.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:33.618Z,1509702153.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:33.633Z,1509702153.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:42:33.634Z,1509702153.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:34.027Z,1509702154.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:34.077Z,1509702154.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:42:34.078Z,1509702154.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:34.427Z,1509702154.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:34.475Z,1509702154.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:42:34.476Z,1509702154.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:34.825Z,1509702154.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:34.846Z,1509702154.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:42:34.847Z,1509702154.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:35.220Z,1509702155.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:35.242Z,1509702155.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:42:35.243Z,1509702155.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:35.618Z,1509702155.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:35.633Z,1509702155.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:42:35.634Z,1509702155.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:36.027Z,1509702156.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:36.046Z,1509702156.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:42:36.047Z,1509702156.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:36.424Z,1509702156.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:36.438Z,1509702156.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T09:42:36.439Z,1509702156.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:36.442Z,1509702156.442 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T09:42:36.443Z,1509702156.443 [Default:CheckIn:C.Wait] Stopped
2017-11-03T09:42:36.443Z,1509702156.443 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T09:42:36.443Z,1509702156.443 [Default:CheckIn:D] Running Loop=1
2017-11-03T09:42:36.828Z,1509702156.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:36.851Z,1509702156.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:36.870Z,1509702156.870 [Default:CheckIn:D] Stopped
2017-11-03T09:42:36.870Z,1509702156.870 [Default:CheckIn:E] Running Loop=1
2017-11-03T09:42:37.223Z,1509702157.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:37.242Z,1509702157.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:37.246Z,1509702157.246 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 567.488411 min 
2017-11-03T09:42:37.246Z,1509702157.246 [Default:CheckIn:E] Stopped
2017-11-03T09:42:37.246Z,1509702157.246 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T09:42:37.246Z,1509702157.246 [Default:CheckIn] Stopped
2017-11-03T09:42:37.246Z,1509702157.246 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T09:42:37.247Z,1509702157.247 [Default:CheckIn](INFO): Running loop #56
2017-11-03T09:42:37.247Z,1509702157.247 [Default:CheckIn] Running Loop=56
2017-11-03T09:42:37.247Z,1509702157.247 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T09:42:37.247Z,1509702157.247 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T09:42:37.622Z,1509702157.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:37.637Z,1509702157.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:40.722Z,1509702160.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:40.743Z,1509702160.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:40.885Z,1509702160.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:40.900Z,1509702160.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:41.280Z,1509702161.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:41.302Z,1509702161.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:41.671Z,1509702161.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:41.691Z,1509702161.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:42.070Z,1509702162.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:42.090Z,1509702162.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:42.472Z,1509702162.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:42.486Z,1509702162.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:42.870Z,1509702162.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:42.891Z,1509702162.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:43.280Z,1509702163.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:43.295Z,1509702163.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:43.680Z,1509702163.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:43.695Z,1509702163.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:44.080Z,1509702164.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:44.095Z,1509702164.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:44.468Z,1509702164.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:44.476Z,1509702164.476 [BPC1](ERROR): Failed to parse message.
2017-11-03T09:42:44.476Z,1509702164.476 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T09:42:44.476Z,1509702164.476 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:42:44.476Z,1509702164.476 [BPC1](ERROR): Data Fault
2017-11-03T09:42:44.484Z,1509702164.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:44.585Z,1509702164.585 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:42:44.871Z,1509702164.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:44.886Z,1509702164.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:45.271Z,1509702165.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:45.291Z,1509702165.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:45.670Z,1509702165.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:45.685Z,1509702165.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:45.765Z,1509702165.765 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:42:45.765Z,1509702165.765 [BPC1] No Fault, FailCount= 1
2017-11-03T09:42:46.080Z,1509702166.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:46.147Z,1509702166.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:46.480Z,1509702166.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:46.499Z,1509702166.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:46.880Z,1509702166.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:46.930Z,1509702166.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:47.271Z,1509702167.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:47.286Z,1509702167.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:47.668Z,1509702167.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:47.691Z,1509702167.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:48.070Z,1509702168.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:48.085Z,1509702168.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:48.472Z,1509702168.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:48.486Z,1509702168.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:48.871Z,1509702168.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:48.891Z,1509702168.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:49.280Z,1509702169.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:49.298Z,1509702169.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:49.680Z,1509702169.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:49.695Z,1509702169.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:50.080Z,1509702170.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:50.103Z,1509702170.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:50.467Z,1509702170.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:50.482Z,1509702170.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:50.871Z,1509702170.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:50.886Z,1509702170.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:51.270Z,1509702171.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:51.285Z,1509702171.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:51.671Z,1509702171.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:51.691Z,1509702171.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:52.081Z,1509702172.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:52.095Z,1509702172.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:52.480Z,1509702172.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:52.495Z,1509702172.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:52.880Z,1509702172.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:52.902Z,1509702172.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:53.272Z,1509702173.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:53.287Z,1509702173.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:53.670Z,1509702173.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:53.685Z,1509702173.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:54.071Z,1509702174.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:54.087Z,1509702174.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:54.474Z,1509702174.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:54.488Z,1509702174.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:54.869Z,1509702174.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:54.885Z,1509702174.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:55.280Z,1509702175.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:55.296Z,1509702175.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:55.680Z,1509702175.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:55.696Z,1509702175.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:56.081Z,1509702176.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:56.096Z,1509702176.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:56.471Z,1509702176.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:56.491Z,1509702176.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:56.871Z,1509702176.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:56.894Z,1509702176.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:57.269Z,1509702177.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:57.285Z,1509702177.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:57.670Z,1509702177.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:57.755Z,1509702177.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:58.080Z,1509702178.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:58.096Z,1509702178.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:58.480Z,1509702178.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:58.531Z,1509702178.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:58.880Z,1509702178.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:58.903Z,1509702178.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:59.271Z,1509702179.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:59.326Z,1509702179.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:42:59.671Z,1509702179.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:42:59.730Z,1509702179.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:00.068Z,1509702180.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:00.083Z,1509702180.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:00.472Z,1509702180.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:00.487Z,1509702180.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:00.868Z,1509702180.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:00.883Z,1509702180.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:01.280Z,1509702181.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:01.295Z,1509702181.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:01.680Z,1509702181.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:01.695Z,1509702181.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:02.080Z,1509702182.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:02.095Z,1509702182.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:02.471Z,1509702182.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:02.491Z,1509702182.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:02.872Z,1509702182.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:02.887Z,1509702182.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:03.270Z,1509702183.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:03.285Z,1509702183.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:03.671Z,1509702183.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:03.691Z,1509702183.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:04.081Z,1509702184.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:04.102Z,1509702184.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:04.480Z,1509702184.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:04.550Z,1509702184.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:04.885Z,1509702184.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:04.900Z,1509702184.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:05.258Z,1509702185.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:05.284Z,1509702185.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:05.663Z,1509702185.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:05.689Z,1509702185.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:06.061Z,1509702186.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:06.095Z,1509702186.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:06.463Z,1509702186.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:06.494Z,1509702186.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:06.857Z,1509702186.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:06.887Z,1509702186.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:07.282Z,1509702187.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:07.297Z,1509702187.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:07.685Z,1509702187.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:07.700Z,1509702187.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:08.085Z,1509702188.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:08.101Z,1509702188.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:08.460Z,1509702188.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:08.487Z,1509702188.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:08.861Z,1509702188.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:08.888Z,1509702188.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:09.264Z,1509702189.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:09.290Z,1509702189.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:09.660Z,1509702189.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:09.686Z,1509702189.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:10.086Z,1509702190.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:10.103Z,1509702190.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:10.485Z,1509702190.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:10.554Z,1509702190.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:10.882Z,1509702190.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:10.897Z,1509702190.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:11.261Z,1509702191.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:11.312Z,1509702191.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:11.663Z,1509702191.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:11.689Z,1509702191.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:12.061Z,1509702192.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:12.123Z,1509702192.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:12.464Z,1509702192.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:12.527Z,1509702192.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:12.863Z,1509702192.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:12.889Z,1509702192.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:13.282Z,1509702193.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:13.297Z,1509702193.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:13.681Z,1509702193.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:13.696Z,1509702193.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:14.082Z,1509702194.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:14.097Z,1509702194.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:14.460Z,1509702194.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:14.486Z,1509702194.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:14.856Z,1509702194.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:14.890Z,1509702194.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:15.264Z,1509702195.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:15.290Z,1509702195.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:15.660Z,1509702195.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:15.686Z,1509702195.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:16.082Z,1509702196.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:16.097Z,1509702196.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:16.477Z,1509702196.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:16.492Z,1509702196.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:16.881Z,1509702196.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:16.896Z,1509702196.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:17.259Z,1509702197.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:17.285Z,1509702197.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:17.663Z,1509702197.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:17.689Z,1509702197.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:18.060Z,1509702198.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:18.086Z,1509702198.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:18.462Z,1509702198.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:18.487Z,1509702198.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:18.863Z,1509702198.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:18.889Z,1509702198.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:19.281Z,1509702199.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:19.297Z,1509702199.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:19.675Z,1509702199.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:19.704Z,1509702199.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:20.081Z,1509702200.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:20.103Z,1509702200.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:20.460Z,1509702200.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:20.486Z,1509702200.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:20.863Z,1509702200.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:20.889Z,1509702200.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:21.263Z,1509702201.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:21.289Z,1509702201.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:21.663Z,1509702201.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:21.689Z,1509702201.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:22.086Z,1509702202.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:22.100Z,1509702202.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:22.485Z,1509702202.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:22.500Z,1509702202.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:22.881Z,1509702202.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:22.896Z,1509702202.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:23.261Z,1509702203.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:23.287Z,1509702203.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:23.660Z,1509702203.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:23.711Z,1509702203.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:24.060Z,1509702204.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:24.086Z,1509702204.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:24.463Z,1509702204.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:24.514Z,1509702204.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:24.863Z,1509702204.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:24.888Z,1509702204.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:25.280Z,1509702205.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:25.295Z,1509702205.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:25.685Z,1509702205.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:25.734Z,1509702205.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:26.077Z,1509702206.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:26.092Z,1509702206.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:26.461Z,1509702206.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:26.525Z,1509702206.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:26.860Z,1509702206.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:26.931Z,1509702206.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:27.264Z,1509702207.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:27.289Z,1509702207.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:27.660Z,1509702207.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:27.686Z,1509702207.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:28.085Z,1509702208.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:28.100Z,1509702208.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:28.485Z,1509702208.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:28.500Z,1509702208.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:28.880Z,1509702208.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:28.895Z,1509702208.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:29.256Z,1509702209.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:29.286Z,1509702209.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:29.663Z,1509702209.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:29.689Z,1509702209.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:30.060Z,1509702210.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:30.086Z,1509702210.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:30.462Z,1509702210.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:30.488Z,1509702210.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:30.863Z,1509702210.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:30.889Z,1509702210.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:31.282Z,1509702211.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:31.297Z,1509702211.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:31.681Z,1509702211.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:31.696Z,1509702211.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:32.081Z,1509702212.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:32.097Z,1509702212.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:32.461Z,1509702212.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:32.487Z,1509702212.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:32.861Z,1509702212.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:32.887Z,1509702212.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:33.274Z,1509702213.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:33.289Z,1509702213.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:33.661Z,1509702213.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:33.695Z,1509702213.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:34.086Z,1509702214.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:34.100Z,1509702214.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:34.485Z,1509702214.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:34.501Z,1509702214.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:34.882Z,1509702214.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:34.897Z,1509702214.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:35.263Z,1509702215.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:35.290Z,1509702215.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:35.663Z,1509702215.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:35.695Z,1509702215.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:36.061Z,1509702216.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:36.096Z,1509702216.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:36.461Z,1509702216.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:36.488Z,1509702216.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:36.863Z,1509702216.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:36.890Z,1509702216.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:37.282Z,1509702217.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:37.297Z,1509702217.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:37.686Z,1509702217.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:37.746Z,1509702217.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:40.755Z,1509702220.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:40.815Z,1509702220.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:40.953Z,1509702220.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:40.968Z,1509702220.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:41.351Z,1509702221.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:41.407Z,1509702221.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:41.752Z,1509702221.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:41.767Z,1509702221.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:42.161Z,1509702222.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:42.219Z,1509702222.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:42.562Z,1509702222.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:42.611Z,1509702222.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:42.962Z,1509702222.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:42.987Z,1509702222.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:43.348Z,1509702223.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:43.364Z,1509702223.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:43.748Z,1509702223.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:43.764Z,1509702223.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:44.148Z,1509702224.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:44.164Z,1509702224.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:44.549Z,1509702224.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:44.565Z,1509702224.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:44.949Z,1509702224.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:44.963Z,1509702224.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:45.366Z,1509702225.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:45.395Z,1509702225.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:45.776Z,1509702225.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:45.792Z,1509702225.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:46.161Z,1509702226.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:46.187Z,1509702226.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:46.552Z,1509702226.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:46.567Z,1509702226.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:46.955Z,1509702226.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:46.988Z,1509702226.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:47.356Z,1509702227.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:47.390Z,1509702227.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:47.749Z,1509702227.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:47.764Z,1509702227.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:48.165Z,1509702228.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:48.218Z,1509702228.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:48.565Z,1509702228.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:48.591Z,1509702228.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:48.965Z,1509702228.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:48.989Z,1509702228.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:49.352Z,1509702229.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:49.367Z,1509702229.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:49.752Z,1509702229.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:49.791Z,1509702229.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:50.153Z,1509702230.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:50.169Z,1509702230.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:50.555Z,1509702230.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:50.591Z,1509702230.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:50.953Z,1509702230.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:50.967Z,1509702230.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:51.366Z,1509702231.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:51.390Z,1509702231.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:51.765Z,1509702231.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:51.790Z,1509702231.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:52.165Z,1509702232.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:52.198Z,1509702232.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:52.556Z,1509702232.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:52.571Z,1509702232.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:52.953Z,1509702232.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:52.968Z,1509702232.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:53.353Z,1509702233.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:53.368Z,1509702233.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:53.752Z,1509702233.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:53.769Z,1509702233.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:54.166Z,1509702234.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:54.196Z,1509702234.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:54.566Z,1509702234.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:54.619Z,1509702234.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:54.966Z,1509702234.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:54.995Z,1509702234.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:55.352Z,1509702235.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:55.367Z,1509702235.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:55.752Z,1509702235.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:55.800Z,1509702235.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:56.152Z,1509702236.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:56.168Z,1509702236.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:56.552Z,1509702236.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:56.596Z,1509702236.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:56.952Z,1509702236.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:56.975Z,1509702236.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:57.357Z,1509702237.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:57.403Z,1509702237.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:57.765Z,1509702237.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:57.797Z,1509702237.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:58.165Z,1509702238.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:58.195Z,1509702238.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:58.553Z,1509702238.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:58.568Z,1509702238.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:58.952Z,1509702238.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:58.967Z,1509702238.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:59.353Z,1509702239.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:59.369Z,1509702239.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:43:59.753Z,1509702239.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:43:59.768Z,1509702239.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:00.165Z,1509702240.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:00.180Z,1509702240.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:00.566Z,1509702240.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:00.600Z,1509702240.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:00.966Z,1509702240.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:00.997Z,1509702240.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:01.355Z,1509702241.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:01.370Z,1509702241.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:01.757Z,1509702241.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:01.773Z,1509702241.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:02.156Z,1509702242.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:02.171Z,1509702242.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:02.556Z,1509702242.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:02.571Z,1509702242.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:02.956Z,1509702242.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:02.970Z,1509702242.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:03.361Z,1509702243.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:03.377Z,1509702243.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:03.761Z,1509702243.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:03.775Z,1509702243.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:04.161Z,1509702244.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:04.177Z,1509702244.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:04.556Z,1509702244.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:04.572Z,1509702244.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:04.955Z,1509702244.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:04.969Z,1509702244.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:05.357Z,1509702245.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:05.372Z,1509702245.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:05.756Z,1509702245.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:05.771Z,1509702245.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:06.161Z,1509702246.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:06.176Z,1509702246.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:06.569Z,1509702246.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:06.601Z,1509702246.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:06.969Z,1509702246.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:07.001Z,1509702247.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:07.354Z,1509702247.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:07.372Z,1509702247.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:07.757Z,1509702247.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:07.771Z,1509702247.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:08.155Z,1509702248.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:08.171Z,1509702248.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:08.556Z,1509702248.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:08.578Z,1509702248.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:08.955Z,1509702248.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:08.970Z,1509702248.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:09.361Z,1509702249.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:09.377Z,1509702249.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:09.757Z,1509702249.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:09.842Z,1509702249.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:10.161Z,1509702250.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:10.177Z,1509702250.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:10.558Z,1509702250.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:10.610Z,1509702250.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:10.956Z,1509702250.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:10.978Z,1509702250.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:11.358Z,1509702251.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:11.414Z,1509702251.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:11.756Z,1509702251.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:11.817Z,1509702251.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:12.161Z,1509702252.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:12.176Z,1509702252.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:12.561Z,1509702252.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:12.576Z,1509702252.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:12.962Z,1509702252.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:12.977Z,1509702252.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:13.356Z,1509702253.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:13.371Z,1509702253.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:13.758Z,1509702253.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:13.773Z,1509702253.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:14.156Z,1509702254.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:14.171Z,1509702254.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:14.557Z,1509702254.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:14.571Z,1509702254.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:14.957Z,1509702254.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:14.972Z,1509702254.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:15.362Z,1509702255.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:15.377Z,1509702255.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:15.761Z,1509702255.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:15.775Z,1509702255.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:16.161Z,1509702256.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:16.177Z,1509702256.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:16.557Z,1509702256.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:16.572Z,1509702256.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:16.956Z,1509702256.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:16.971Z,1509702256.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:17.365Z,1509702257.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:17.380Z,1509702257.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:17.756Z,1509702257.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:17.771Z,1509702257.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:18.168Z,1509702258.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:18.183Z,1509702258.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:18.569Z,1509702258.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:18.585Z,1509702258.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:18.968Z,1509702258.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:18.984Z,1509702258.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:19.359Z,1509702259.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:19.374Z,1509702259.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:19.759Z,1509702259.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:19.774Z,1509702259.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:20.157Z,1509702260.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:20.173Z,1509702260.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:20.558Z,1509702260.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:20.572Z,1509702260.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:20.959Z,1509702260.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:20.975Z,1509702260.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:21.370Z,1509702261.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:21.385Z,1509702261.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:21.769Z,1509702261.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:21.791Z,1509702261.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:22.170Z,1509702262.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:22.191Z,1509702262.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:22.557Z,1509702262.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:22.573Z,1509702262.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:22.956Z,1509702262.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:22.982Z,1509702262.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:23.359Z,1509702263.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:23.375Z,1509702263.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:23.759Z,1509702263.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:23.831Z,1509702263.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:24.169Z,1509702264.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:24.203Z,1509702264.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:24.570Z,1509702264.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:24.586Z,1509702264.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:24.969Z,1509702264.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:24.985Z,1509702264.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:25.348Z,1509702265.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:25.418Z,1509702265.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:25.749Z,1509702265.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:25.777Z,1509702265.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:26.148Z,1509702266.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:26.219Z,1509702266.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:26.545Z,1509702266.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:26.578Z,1509702266.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:26.948Z,1509702266.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:27.017Z,1509702267.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:27.370Z,1509702267.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:27.385Z,1509702267.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:27.770Z,1509702267.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:27.785Z,1509702267.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:28.174Z,1509702268.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:28.195Z,1509702268.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:28.551Z,1509702268.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:28.577Z,1509702268.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:28.951Z,1509702268.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:28.977Z,1509702268.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:29.348Z,1509702269.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:29.379Z,1509702269.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:29.752Z,1509702269.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:29.778Z,1509702269.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:30.170Z,1509702270.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:30.185Z,1509702270.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:30.575Z,1509702270.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:30.590Z,1509702270.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:30.970Z,1509702270.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:30.987Z,1509702270.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:31.347Z,1509702271.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:31.378Z,1509702271.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:31.751Z,1509702271.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:31.779Z,1509702271.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:32.151Z,1509702272.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:32.178Z,1509702272.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:32.548Z,1509702272.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:32.579Z,1509702272.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:32.951Z,1509702272.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:32.978Z,1509702272.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:33.370Z,1509702273.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:33.385Z,1509702273.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:33.773Z,1509702273.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:33.789Z,1509702273.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:34.174Z,1509702274.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:34.191Z,1509702274.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:34.548Z,1509702274.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:34.579Z,1509702274.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:34.948Z,1509702274.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:34.982Z,1509702274.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:35.351Z,1509702275.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:35.383Z,1509702275.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:35.751Z,1509702275.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:35.783Z,1509702275.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:36.131Z,1509702276.131 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T09:44:36.131Z,1509702276.131 [NAL9602] Data Fault, FailCount= 2
2017-11-03T09:44:36.132Z,1509702276.132 [NAL9602](ERROR): Data Fault
2017-11-03T09:44:36.149Z,1509702276.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:36.188Z,1509702276.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:36.285Z,1509702276.285 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T09:44:36.531Z,1509702276.531 [NAL9602](INFO): Powering down
2017-11-03T09:44:36.549Z,1509702276.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:36.588Z,1509702276.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:36.950Z,1509702276.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:36.982Z,1509702276.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:37.350Z,1509702277.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:37.386Z,1509702277.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:37.477Z,1509702277.477 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T09:44:37.477Z,1509702277.477 [NAL9602] No Fault, FailCount= 2
2017-11-03T09:44:37.749Z,1509702277.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:37.764Z,1509702277.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:40.842Z,1509702280.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:40.927Z,1509702280.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:41.055Z,1509702281.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:41.089Z,1509702281.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:41.452Z,1509702281.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:41.511Z,1509702281.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:41.854Z,1509702281.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:41.869Z,1509702281.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:42.251Z,1509702282.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:42.303Z,1509702282.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:42.651Z,1509702282.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:42.666Z,1509702282.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:43.058Z,1509702283.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:43.111Z,1509702283.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:43.451Z,1509702283.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:43.466Z,1509702283.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:43.858Z,1509702283.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:43.893Z,1509702283.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:44.251Z,1509702284.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:44.267Z,1509702284.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:44.658Z,1509702284.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:44.693Z,1509702284.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:45.051Z,1509702285.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:45.066Z,1509702285.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:45.451Z,1509702285.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:45.466Z,1509702285.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:45.858Z,1509702285.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:45.894Z,1509702285.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:46.251Z,1509702286.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:46.266Z,1509702286.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:46.651Z,1509702286.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:46.666Z,1509702286.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:47.051Z,1509702287.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:47.066Z,1509702287.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:47.451Z,1509702287.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:47.466Z,1509702287.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:47.851Z,1509702287.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:47.866Z,1509702287.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:48.252Z,1509702288.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:48.266Z,1509702288.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:48.651Z,1509702288.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:48.666Z,1509702288.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:49.051Z,1509702289.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:49.067Z,1509702289.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:49.451Z,1509702289.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:49.466Z,1509702289.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:49.859Z,1509702289.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:49.897Z,1509702289.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:50.251Z,1509702290.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:50.267Z,1509702290.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:50.658Z,1509702290.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:50.673Z,1509702290.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:51.054Z,1509702291.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:51.070Z,1509702291.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:51.454Z,1509702291.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:51.475Z,1509702291.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:51.851Z,1509702291.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:51.870Z,1509702291.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:52.251Z,1509702292.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:52.270Z,1509702292.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:52.651Z,1509702292.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:52.667Z,1509702292.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:53.051Z,1509702293.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:53.066Z,1509702293.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:53.451Z,1509702293.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:53.466Z,1509702293.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:53.855Z,1509702293.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:53.871Z,1509702293.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:54.255Z,1509702294.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:54.270Z,1509702294.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:54.655Z,1509702294.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:54.670Z,1509702294.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:55.055Z,1509702295.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:55.122Z,1509702295.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:55.459Z,1509702295.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:55.521Z,1509702295.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:55.855Z,1509702295.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:55.870Z,1509702295.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:56.259Z,1509702296.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:56.274Z,1509702296.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:56.659Z,1509702296.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:56.706Z,1509702296.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:57.055Z,1509702297.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:57.070Z,1509702297.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:57.459Z,1509702297.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:57.510Z,1509702297.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:57.859Z,1509702297.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:57.902Z,1509702297.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:58.255Z,1509702298.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:58.270Z,1509702298.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:58.659Z,1509702298.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:58.674Z,1509702298.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:59.059Z,1509702299.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:59.074Z,1509702299.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:59.459Z,1509702299.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:59.474Z,1509702299.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:44:59.859Z,1509702299.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:44:59.874Z,1509702299.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:00.255Z,1509702300.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:00.270Z,1509702300.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:00.655Z,1509702300.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:00.670Z,1509702300.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:01.059Z,1509702301.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:01.075Z,1509702301.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:01.455Z,1509702301.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:01.470Z,1509702301.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:01.855Z,1509702301.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:01.870Z,1509702301.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:02.259Z,1509702302.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:02.274Z,1509702302.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:02.655Z,1509702302.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:02.670Z,1509702302.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:03.059Z,1509702303.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:03.074Z,1509702303.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:03.459Z,1509702303.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:03.475Z,1509702303.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:03.855Z,1509702303.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:03.870Z,1509702303.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:04.255Z,1509702304.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:04.270Z,1509702304.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:04.659Z,1509702304.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:04.674Z,1509702304.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:05.054Z,1509702305.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:05.068Z,1509702305.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:05.459Z,1509702305.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:05.474Z,1509702305.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:05.859Z,1509702305.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:05.879Z,1509702305.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:06.259Z,1509702306.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:06.274Z,1509702306.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:06.635Z,1509702306.635 [NAL9602](INFO): Powering up NAL9602
2017-11-03T09:45:06.664Z,1509702306.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:06.679Z,1509702306.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:07.060Z,1509702307.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:07.083Z,1509702307.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:07.459Z,1509702307.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:07.474Z,1509702307.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:07.860Z,1509702307.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:07.874Z,1509702307.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:08.260Z,1509702308.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:08.275Z,1509702308.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:08.659Z,1509702308.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:08.678Z,1509702308.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:09.059Z,1509702309.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:09.074Z,1509702309.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:09.460Z,1509702309.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:09.475Z,1509702309.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:09.858Z,1509702309.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:09.922Z,1509702309.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:10.256Z,1509702310.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:10.318Z,1509702310.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:10.660Z,1509702310.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:10.676Z,1509702310.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:11.056Z,1509702311.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:11.099Z,1509702311.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:11.460Z,1509702311.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:11.474Z,1509702311.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:11.860Z,1509702311.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:11.910Z,1509702311.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:12.260Z,1509702312.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:12.302Z,1509702312.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:12.657Z,1509702312.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:12.672Z,1509702312.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:13.060Z,1509702313.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:13.076Z,1509702313.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:13.459Z,1509702313.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:13.475Z,1509702313.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:13.857Z,1509702313.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:13.871Z,1509702313.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:14.260Z,1509702314.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:14.275Z,1509702314.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:14.656Z,1509702314.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:14.670Z,1509702314.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:15.060Z,1509702315.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:15.075Z,1509702315.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:15.459Z,1509702315.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:15.475Z,1509702315.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:15.859Z,1509702315.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:15.874Z,1509702315.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:16.257Z,1509702316.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:16.272Z,1509702316.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:16.660Z,1509702316.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:16.675Z,1509702316.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:17.060Z,1509702317.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:17.075Z,1509702317.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:17.462Z,1509702317.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:17.477Z,1509702317.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:17.477Z,1509702317.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 190
2017-11-03T09:45:17.477Z,1509702317.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:45:17.479Z,1509702317.479 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:17.479Z,1509702317.479 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 190
2017-11-03T09:45:17.479Z,1509702317.479 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:45:17.481Z,1509702317.481 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:17.481Z,1509702317.481 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 190
2017-11-03T09:45:17.481Z,1509702317.481 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:45:17.596Z,1509702317.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:45:17.597Z,1509702317.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:45:17.597Z,1509702317.597 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:45:17.838Z,1509702317.838 [NAL9602](INFO): NAL9602 initialized
2017-11-03T09:45:17.867Z,1509702317.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:17.972Z,1509702317.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:45:17.973Z,1509702317.973 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 190
2017-11-03T09:45:17.973Z,1509702317.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:45:17.973Z,1509702317.973 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 190
2017-11-03T09:45:17.974Z,1509702317.974 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:45:17.974Z,1509702317.974 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 190
2017-11-03T09:45:18.259Z,1509702318.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:18.273Z,1509702318.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:45:18.273Z,1509702318.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:45:18.274Z,1509702318.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:45:18.274Z,1509702318.274 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:45:18.274Z,1509702318.274 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:45:18.275Z,1509702318.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:45:18.275Z,1509702318.275 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:45:18.276Z,1509702318.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:45:18.276Z,1509702318.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:45:18.669Z,1509702318.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:18.690Z,1509702318.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:45:18.691Z,1509702318.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:19.068Z,1509702319.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:19.083Z,1509702319.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:45:19.084Z,1509702319.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:19.468Z,1509702319.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:19.490Z,1509702319.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:45:19.491Z,1509702319.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:19.861Z,1509702319.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:19.876Z,1509702319.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:45:19.877Z,1509702319.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:20.262Z,1509702320.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:20.279Z,1509702320.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:45:20.280Z,1509702320.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:20.662Z,1509702320.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:20.677Z,1509702320.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:45:20.678Z,1509702320.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:21.061Z,1509702321.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:21.075Z,1509702321.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:45:21.076Z,1509702321.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:21.468Z,1509702321.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:21.483Z,1509702321.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:45:21.484Z,1509702321.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:21.868Z,1509702321.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:21.887Z,1509702321.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:45:21.888Z,1509702321.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:22.273Z,1509702322.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:22.295Z,1509702322.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:45:22.296Z,1509702322.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:22.663Z,1509702322.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:22.682Z,1509702322.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:45:22.683Z,1509702322.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:23.060Z,1509702323.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:23.075Z,1509702323.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:45:23.076Z,1509702323.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:23.463Z,1509702323.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:23.482Z,1509702323.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:45:23.483Z,1509702323.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:23.859Z,1509702323.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:23.874Z,1509702323.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:45:23.875Z,1509702323.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:24.272Z,1509702324.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:24.287Z,1509702324.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:45:24.288Z,1509702324.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:24.672Z,1509702324.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:24.759Z,1509702324.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T09:45:24.760Z,1509702324.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:25.070Z,1509702325.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:25.085Z,1509702325.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:45:25.086Z,1509702325.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:25.453Z,1509702325.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:25.517Z,1509702325.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:45:25.518Z,1509702325.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:25.853Z,1509702325.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:25.879Z,1509702325.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T09:45:25.880Z,1509702325.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:26.249Z,1509702326.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:26.315Z,1509702326.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T09:45:26.316Z,1509702326.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:26.652Z,1509702326.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:26.715Z,1509702326.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:45:26.717Z,1509702326.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:27.051Z,1509702327.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:27.077Z,1509702327.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:45:27.078Z,1509702327.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:27.468Z,1509702327.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:27.487Z,1509702327.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:45:27.488Z,1509702327.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:27.874Z,1509702327.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:27.888Z,1509702327.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:45:27.889Z,1509702327.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:28.270Z,1509702328.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:28.290Z,1509702328.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:45:28.291Z,1509702328.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:28.647Z,1509702328.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:28.679Z,1509702328.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T09:45:28.680Z,1509702328.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:29.052Z,1509702329.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:29.087Z,1509702329.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T09:45:29.088Z,1509702329.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:29.449Z,1509702329.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:29.463Z,1509702329.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:45:29.464Z,1509702329.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:29.852Z,1509702329.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:29.867Z,1509702329.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:45:29.868Z,1509702329.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:30.265Z,1509702330.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:30.291Z,1509702330.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:45:30.293Z,1509702330.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:30.665Z,1509702330.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:30.692Z,1509702330.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:45:30.693Z,1509702330.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:31.066Z,1509702331.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:31.090Z,1509702331.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:45:31.091Z,1509702331.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:31.452Z,1509702331.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:31.467Z,1509702331.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:45:31.468Z,1509702331.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:31.853Z,1509702331.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:31.867Z,1509702331.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:45:31.868Z,1509702331.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:32.252Z,1509702332.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:32.266Z,1509702332.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:45:32.267Z,1509702332.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:32.660Z,1509702332.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:32.694Z,1509702332.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:45:32.694Z,1509702332.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:33.051Z,1509702333.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:33.065Z,1509702333.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:45:33.066Z,1509702333.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:33.465Z,1509702333.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:33.489Z,1509702333.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:45:33.490Z,1509702333.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:33.884Z,1509702333.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:33.898Z,1509702333.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:45:33.899Z,1509702333.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:34.272Z,1509702334.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:34.296Z,1509702334.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:45:34.297Z,1509702334.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:34.659Z,1509702334.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:34.694Z,1509702334.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:45:34.695Z,1509702334.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:35.056Z,1509702335.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:35.070Z,1509702335.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:45:35.071Z,1509702335.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:35.456Z,1509702335.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:35.478Z,1509702335.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:45:35.479Z,1509702335.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:35.859Z,1509702335.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:35.878Z,1509702335.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:45:35.879Z,1509702335.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:36.269Z,1509702336.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:36.298Z,1509702336.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:45:36.299Z,1509702336.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:36.668Z,1509702336.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:36.698Z,1509702336.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:45:36.699Z,1509702336.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:37.069Z,1509702337.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:37.098Z,1509702337.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:45:37.099Z,1509702337.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:37.456Z,1509702337.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:37.471Z,1509702337.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T09:45:37.472Z,1509702337.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:37.857Z,1509702337.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:37.871Z,1509702337.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:40.954Z,1509702340.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:41.034Z,1509702341.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:41.175Z,1509702341.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:41.214Z,1509702341.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:41.581Z,1509702341.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:41.610Z,1509702341.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:41.981Z,1509702341.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:42.039Z,1509702342.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:42.383Z,1509702342.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:42.408Z,1509702342.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:42.768Z,1509702342.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:42.838Z,1509702342.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:43.168Z,1509702343.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:43.183Z,1509702343.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:43.568Z,1509702343.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:43.623Z,1509702343.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:43.967Z,1509702343.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:44.010Z,1509702344.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:44.381Z,1509702344.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:44.405Z,1509702344.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:44.781Z,1509702344.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:44.809Z,1509702344.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:45.199Z,1509702345.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:45.214Z,1509702345.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:45.568Z,1509702345.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:45.610Z,1509702345.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:45.968Z,1509702345.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:45.983Z,1509702345.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:46.367Z,1509702346.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:46.382Z,1509702346.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:46.768Z,1509702346.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:46.783Z,1509702346.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:47.167Z,1509702347.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:47.186Z,1509702347.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:47.581Z,1509702347.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:47.607Z,1509702347.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:47.981Z,1509702347.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:48.012Z,1509702348.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:48.381Z,1509702348.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:48.409Z,1509702348.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:48.767Z,1509702348.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:48.785Z,1509702348.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:49.168Z,1509702349.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:49.183Z,1509702349.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:49.569Z,1509702349.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:49.584Z,1509702349.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:49.967Z,1509702349.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:49.982Z,1509702349.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:50.383Z,1509702350.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:50.408Z,1509702350.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:50.785Z,1509702350.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:50.826Z,1509702350.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:51.181Z,1509702351.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:51.211Z,1509702351.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:51.568Z,1509702351.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:51.583Z,1509702351.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:51.971Z,1509702351.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:52.006Z,1509702352.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:52.367Z,1509702352.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:52.382Z,1509702352.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:52.768Z,1509702352.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:52.784Z,1509702352.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:53.171Z,1509702353.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:53.207Z,1509702353.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:53.582Z,1509702353.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:53.612Z,1509702353.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:53.984Z,1509702353.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:54.029Z,1509702354.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:54.383Z,1509702354.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:54.421Z,1509702354.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:54.773Z,1509702354.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:54.789Z,1509702354.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:55.196Z,1509702355.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:55.236Z,1509702355.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:55.576Z,1509702355.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:55.678Z,1509702355.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:55.976Z,1509702355.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:56.034Z,1509702356.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:56.386Z,1509702356.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:56.430Z,1509702356.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:56.794Z,1509702356.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:56.851Z,1509702356.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:57.192Z,1509702357.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:57.250Z,1509702357.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:57.576Z,1509702357.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:57.627Z,1509702357.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:57.975Z,1509702357.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:58.034Z,1509702358.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:58.377Z,1509702358.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:58.425Z,1509702358.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:58.775Z,1509702358.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:58.852Z,1509702358.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:59.198Z,1509702359.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:59.240Z,1509702359.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:59.601Z,1509702359.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:45:59.646Z,1509702359.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:45:59.996Z,1509702359.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:00.015Z,1509702360.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:00.399Z,1509702360.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:00.447Z,1509702360.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:00.768Z,1509702360.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:00.855Z,1509702360.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:01.169Z,1509702361.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:01.203Z,1509702361.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:01.607Z,1509702361.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:01.643Z,1509702361.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:01.969Z,1509702361.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:02.021Z,1509702362.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:02.388Z,1509702362.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:02.415Z,1509702362.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:02.784Z,1509702362.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:02.815Z,1509702362.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:03.186Z,1509702363.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:03.283Z,1509702363.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:03.571Z,1509702363.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:03.621Z,1509702363.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:03.969Z,1509702363.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:04.028Z,1509702364.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:04.391Z,1509702364.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:04.421Z,1509702364.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:04.774Z,1509702364.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:04.827Z,1509702364.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:05.184Z,1509702365.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:05.233Z,1509702365.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:05.584Z,1509702365.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:05.633Z,1509702365.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:05.982Z,1509702365.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:06.006Z,1509702366.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:06.376Z,1509702366.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:06.403Z,1509702366.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:06.774Z,1509702366.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:06.836Z,1509702366.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:07.190Z,1509702367.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:07.235Z,1509702367.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:07.588Z,1509702367.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:07.642Z,1509702367.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:07.995Z,1509702367.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:08.038Z,1509702368.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:08.384Z,1509702368.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:08.427Z,1509702368.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:08.768Z,1509702368.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:08.812Z,1509702368.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:09.189Z,1509702369.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:09.230Z,1509702369.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:09.570Z,1509702369.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:09.603Z,1509702369.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:09.969Z,1509702369.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:10.082Z,1509702370.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:10.383Z,1509702370.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:10.414Z,1509702370.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:10.786Z,1509702370.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:10.811Z,1509702370.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:11.183Z,1509702371.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:11.223Z,1509702371.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:11.569Z,1509702371.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:11.602Z,1509702371.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:11.968Z,1509702371.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:12.015Z,1509702372.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:12.368Z,1509702372.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:12.414Z,1509702372.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:12.772Z,1509702372.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:12.791Z,1509702372.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:13.168Z,1509702373.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:13.183Z,1509702373.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:13.581Z,1509702373.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:13.606Z,1509702373.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:13.981Z,1509702373.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:14.000Z,1509702374.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:14.395Z,1509702374.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:14.411Z,1509702374.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:14.769Z,1509702374.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:14.795Z,1509702374.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:15.170Z,1509702375.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:15.184Z,1509702375.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:15.570Z,1509702375.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:15.585Z,1509702375.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:15.968Z,1509702375.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:15.987Z,1509702375.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:16.382Z,1509702376.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:16.402Z,1509702376.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:16.782Z,1509702376.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:16.806Z,1509702376.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:17.177Z,1509702377.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:17.196Z,1509702377.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:17.569Z,1509702377.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:17.589Z,1509702377.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:17.971Z,1509702377.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:17.991Z,1509702377.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:18.368Z,1509702378.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:18.383Z,1509702378.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:18.784Z,1509702378.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:18.818Z,1509702378.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:19.164Z,1509702379.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:19.194Z,1509702379.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:19.578Z,1509702379.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:19.624Z,1509702379.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:19.990Z,1509702379.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:20.015Z,1509702380.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:20.385Z,1509702380.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:20.413Z,1509702380.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:20.768Z,1509702380.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:20.809Z,1509702380.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:21.175Z,1509702381.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:21.211Z,1509702381.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:21.568Z,1509702381.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:21.583Z,1509702381.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:21.967Z,1509702381.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:21.982Z,1509702381.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:22.383Z,1509702382.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:22.409Z,1509702382.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:22.781Z,1509702382.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:22.818Z,1509702382.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:23.181Z,1509702383.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:23.214Z,1509702383.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:23.569Z,1509702383.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:23.613Z,1509702383.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:23.967Z,1509702383.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:24.005Z,1509702384.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:24.367Z,1509702384.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:24.423Z,1509702384.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:24.772Z,1509702384.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:24.835Z,1509702384.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:25.172Z,1509702385.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:25.188Z,1509702385.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:25.586Z,1509702385.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:25.642Z,1509702385.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:25.984Z,1509702385.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:26.030Z,1509702386.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:26.384Z,1509702386.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:26.434Z,1509702386.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:26.778Z,1509702386.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:26.830Z,1509702386.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:27.177Z,1509702387.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:27.196Z,1509702387.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:27.580Z,1509702387.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:27.595Z,1509702387.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:27.976Z,1509702387.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:27.999Z,1509702387.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:28.384Z,1509702388.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:28.403Z,1509702388.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:28.786Z,1509702388.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:28.801Z,1509702388.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:29.183Z,1509702389.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:29.207Z,1509702389.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:29.577Z,1509702389.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:29.592Z,1509702389.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:29.979Z,1509702389.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:29.998Z,1509702389.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:30.379Z,1509702390.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:30.397Z,1509702390.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:30.778Z,1509702390.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:30.823Z,1509702390.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:31.173Z,1509702391.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:31.188Z,1509702391.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:31.583Z,1509702391.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:31.602Z,1509702391.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:31.987Z,1509702391.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:32.003Z,1509702392.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:32.384Z,1509702392.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:32.426Z,1509702392.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:32.776Z,1509702392.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:32.790Z,1509702392.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:33.180Z,1509702393.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:33.199Z,1509702393.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:33.581Z,1509702393.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:33.598Z,1509702393.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:33.978Z,1509702393.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:34.003Z,1509702394.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:34.386Z,1509702394.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:34.403Z,1509702394.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:34.784Z,1509702394.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:34.803Z,1509702394.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:35.186Z,1509702395.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:35.201Z,1509702395.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:35.581Z,1509702395.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:35.626Z,1509702395.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:35.972Z,1509702395.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:35.988Z,1509702395.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:36.379Z,1509702396.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:36.398Z,1509702396.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:36.778Z,1509702396.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:36.797Z,1509702396.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:37.180Z,1509702397.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:37.226Z,1509702397.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:37.584Z,1509702397.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:37.610Z,1509702397.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:37.985Z,1509702397.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:38.004Z,1509702398.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:41.071Z,1509702401.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:41.147Z,1509702401.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:41.295Z,1509702401.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:41.315Z,1509702401.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:41.693Z,1509702401.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:41.742Z,1509702401.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:42.094Z,1509702402.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:42.109Z,1509702402.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:42.492Z,1509702402.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:42.535Z,1509702402.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:42.892Z,1509702402.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:42.942Z,1509702402.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:43.298Z,1509702403.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:43.313Z,1509702403.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:43.697Z,1509702403.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:43.712Z,1509702403.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:44.098Z,1509702404.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:44.113Z,1509702404.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:44.492Z,1509702404.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:44.507Z,1509702404.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:44.892Z,1509702404.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:44.914Z,1509702404.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:45.295Z,1509702405.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:45.310Z,1509702405.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:45.693Z,1509702405.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:45.708Z,1509702405.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:46.092Z,1509702406.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:46.107Z,1509702406.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:46.497Z,1509702406.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:46.513Z,1509702406.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:46.901Z,1509702406.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:46.917Z,1509702406.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:47.297Z,1509702407.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:47.319Z,1509702407.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:47.696Z,1509702407.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:47.711Z,1509702407.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:48.093Z,1509702408.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:48.108Z,1509702408.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:48.494Z,1509702408.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:48.508Z,1509702408.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:48.895Z,1509702408.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:48.910Z,1509702408.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:49.298Z,1509702409.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:49.314Z,1509702409.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:49.702Z,1509702409.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:49.717Z,1509702409.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:50.098Z,1509702410.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:50.119Z,1509702410.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:50.491Z,1509702410.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:50.508Z,1509702410.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:50.895Z,1509702410.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:50.910Z,1509702410.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:51.294Z,1509702411.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:51.310Z,1509702411.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:51.692Z,1509702411.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:51.708Z,1509702411.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:52.093Z,1509702412.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:52.111Z,1509702412.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:52.498Z,1509702412.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:52.513Z,1509702412.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:52.901Z,1509702412.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:52.917Z,1509702412.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:53.297Z,1509702413.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:53.319Z,1509702413.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:53.690Z,1509702413.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:53.711Z,1509702413.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:54.092Z,1509702414.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:54.107Z,1509702414.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:54.494Z,1509702414.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:54.509Z,1509702414.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:54.896Z,1509702414.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:54.978Z,1509702414.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:55.302Z,1509702415.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:55.323Z,1509702415.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:55.702Z,1509702415.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:55.755Z,1509702415.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:56.102Z,1509702416.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:56.118Z,1509702416.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:56.495Z,1509702416.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:56.546Z,1509702416.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:56.892Z,1509702416.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:56.943Z,1509702416.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:57.295Z,1509702417.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:57.311Z,1509702417.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:57.696Z,1509702417.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:57.711Z,1509702417.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:58.093Z,1509702418.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:58.115Z,1509702418.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:58.501Z,1509702418.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:58.518Z,1509702418.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:58.900Z,1509702418.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:58.924Z,1509702418.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:59.301Z,1509702419.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:59.323Z,1509702419.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:46:59.696Z,1509702419.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:46:59.710Z,1509702419.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:00.096Z,1509702420.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:00.111Z,1509702420.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:00.496Z,1509702420.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:00.510Z,1509702420.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:00.892Z,1509702420.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:00.907Z,1509702420.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:01.302Z,1509702421.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:01.323Z,1509702421.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:01.700Z,1509702421.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:01.714Z,1509702421.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:02.101Z,1509702422.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:02.115Z,1509702422.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:02.496Z,1509702422.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:02.511Z,1509702422.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:02.892Z,1509702422.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:02.907Z,1509702422.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:03.296Z,1509702423.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:03.310Z,1509702423.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:03.696Z,1509702423.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:03.719Z,1509702423.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:04.093Z,1509702424.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:04.108Z,1509702424.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:04.501Z,1509702424.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:04.517Z,1509702424.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:04.900Z,1509702424.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:04.916Z,1509702424.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:05.301Z,1509702425.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:05.319Z,1509702425.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:05.696Z,1509702425.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:05.711Z,1509702425.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:06.096Z,1509702426.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:06.111Z,1509702426.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:06.493Z,1509702426.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:06.508Z,1509702426.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:06.889Z,1509702426.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:06.904Z,1509702426.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:07.302Z,1509702427.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:07.323Z,1509702427.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:07.701Z,1509702427.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:07.717Z,1509702427.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:08.101Z,1509702428.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:08.119Z,1509702428.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:08.495Z,1509702428.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:08.511Z,1509702428.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:08.892Z,1509702428.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:08.962Z,1509702428.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:09.295Z,1509702429.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:09.328Z,1509702429.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:09.696Z,1509702429.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:09.711Z,1509702429.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:10.089Z,1509702430.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:10.127Z,1509702430.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:10.505Z,1509702430.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:10.520Z,1509702430.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:10.903Z,1509702430.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:10.955Z,1509702430.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:11.303Z,1509702431.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:11.323Z,1509702431.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:11.695Z,1509702431.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:11.749Z,1509702431.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:12.095Z,1509702432.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:12.110Z,1509702432.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:12.495Z,1509702432.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:12.510Z,1509702432.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:12.895Z,1509702432.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:12.910Z,1509702432.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:13.304Z,1509702433.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:13.323Z,1509702433.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:13.703Z,1509702433.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:13.723Z,1509702433.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:14.104Z,1509702434.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:14.119Z,1509702434.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:14.493Z,1509702434.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:14.508Z,1509702434.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:14.894Z,1509702434.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:14.909Z,1509702434.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:15.295Z,1509702435.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:15.310Z,1509702435.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:15.694Z,1509702435.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:15.709Z,1509702435.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:16.095Z,1509702436.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:16.115Z,1509702436.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:16.504Z,1509702436.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:16.520Z,1509702436.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:16.903Z,1509702436.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:16.923Z,1509702436.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:17.303Z,1509702437.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:17.319Z,1509702437.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:17.695Z,1509702437.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:17.710Z,1509702437.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:18.089Z,1509702438.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:18.109Z,1509702438.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:18.492Z,1509702438.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:18.507Z,1509702438.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:18.896Z,1509702438.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:18.910Z,1509702438.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:19.304Z,1509702439.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:19.320Z,1509702439.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:19.704Z,1509702439.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:19.723Z,1509702439.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:20.104Z,1509702440.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:20.123Z,1509702440.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:20.493Z,1509702440.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:20.508Z,1509702440.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:20.892Z,1509702440.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:20.908Z,1509702440.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:21.296Z,1509702441.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:21.319Z,1509702441.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:21.694Z,1509702441.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:21.709Z,1509702441.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:22.092Z,1509702442.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:22.107Z,1509702442.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:22.504Z,1509702442.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:22.520Z,1509702442.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:22.904Z,1509702442.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:22.920Z,1509702442.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:23.304Z,1509702443.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:23.323Z,1509702443.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:23.695Z,1509702443.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:23.727Z,1509702443.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:24.093Z,1509702444.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:24.135Z,1509702444.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:24.485Z,1509702444.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:24.511Z,1509702444.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:24.887Z,1509702444.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:24.913Z,1509702444.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:25.306Z,1509702445.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:25.366Z,1509702445.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:25.705Z,1509702445.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:25.721Z,1509702445.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:26.102Z,1509702446.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:26.139Z,1509702446.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:26.486Z,1509702446.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:26.555Z,1509702446.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:26.885Z,1509702446.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:26.911Z,1509702446.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:27.288Z,1509702447.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:27.314Z,1509702447.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:27.698Z,1509702447.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:27.713Z,1509702447.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:28.088Z,1509702448.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:28.114Z,1509702448.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:28.510Z,1509702448.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:28.525Z,1509702448.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:28.907Z,1509702448.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:28.922Z,1509702448.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:29.306Z,1509702449.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:29.321Z,1509702449.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:29.680Z,1509702449.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:29.712Z,1509702449.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:30.085Z,1509702450.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:30.111Z,1509702450.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:30.485Z,1509702450.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:30.513Z,1509702450.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:30.887Z,1509702450.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:30.915Z,1509702450.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:31.305Z,1509702451.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:31.322Z,1509702451.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:31.705Z,1509702451.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:31.722Z,1509702451.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:32.110Z,1509702452.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:32.126Z,1509702452.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:32.488Z,1509702452.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:32.514Z,1509702452.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:32.885Z,1509702452.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:32.912Z,1509702452.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:33.285Z,1509702453.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:33.312Z,1509702453.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:33.688Z,1509702453.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:33.722Z,1509702453.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:34.085Z,1509702454.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:34.120Z,1509702454.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:34.510Z,1509702454.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:34.525Z,1509702454.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:34.909Z,1509702454.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:34.925Z,1509702454.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:35.305Z,1509702455.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:35.322Z,1509702455.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:35.685Z,1509702455.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:35.720Z,1509702455.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:36.087Z,1509702456.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:36.113Z,1509702456.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:36.486Z,1509702456.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:36.511Z,1509702456.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:36.887Z,1509702456.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:36.913Z,1509702456.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:37.301Z,1509702457.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:37.317Z,1509702457.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:37.321Z,1509702457.321 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T09:42:37.2Z
2017-11-03T09:47:37.321Z,1509702457.321 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T09:47:37.321Z,1509702457.321 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T09:47:37.709Z,1509702457.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:37.725Z,1509702457.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:38.213Z,1509702458.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:38.228Z,1509702458.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:41.173Z,1509702461.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:41.243Z,1509702461.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:41.358Z,1509702461.358 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0224.lzma
2017-11-03T09:47:41.380Z,1509702461.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:41.396Z,1509702461.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:41.787Z,1509702461.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:41.822Z,1509702461.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:42.147Z,1509702462.147 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0224.lzma.bak
2017-11-03T09:47:42.147Z,1509702462.147 [DataOverHttps](INFO): SBD MOMSN=5183266
2017-11-03T09:47:42.198Z,1509702462.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:42.261Z,1509702462.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:42.807Z,1509702462.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:42.825Z,1509702462.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:42.978Z,1509702462.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:43.031Z,1509702463.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:46.123Z,1509702466.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:46.168Z,1509702466.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:46.292Z,1509702466.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:46.323Z,1509702466.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:46.713Z,1509702466.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:46.728Z,1509702466.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:47.125Z,1509702467.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:47.140Z,1509702467.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:47.517Z,1509702467.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:47.533Z,1509702467.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:47.910Z,1509702467.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:47.925Z,1509702467.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:51.018Z,1509702471.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:51.033Z,1509702471.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:51.129Z,1509702471.129 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20171103T001125/Express0225.lzma
2017-11-03T09:47:51.158Z,1509702471.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:51.191Z,1509702471.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:51.572Z,1509702471.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:51.598Z,1509702471.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:51.935Z,1509702471.935 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0225.lzma.bak
2017-11-03T09:47:51.935Z,1509702471.935 [DataOverHttps](INFO): SBD MOMSN=5183268
2017-11-03T09:47:51.979Z,1509702471.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:52.001Z,1509702472.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:52.574Z,1509702472.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:52.595Z,1509702472.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:52.598Z,1509702472.598 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T09:47:52.598Z,1509702472.598 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T09:47:52.598Z,1509702472.598 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T09:47:52.765Z,1509702472.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:52.800Z,1509702472.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:55.872Z,1509702475.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:55.887Z,1509702475.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:56.017Z,1509702476.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:56.033Z,1509702476.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:56.423Z,1509702476.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:56.439Z,1509702476.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:56.825Z,1509702476.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:56.840Z,1509702476.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:57.225Z,1509702477.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:57.240Z,1509702477.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:57.610Z,1509702477.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:57.629Z,1509702477.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:58.005Z,1509702478.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:58.059Z,1509702478.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:58.409Z,1509702478.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:58.463Z,1509702478.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:58.808Z,1509702478.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:58.837Z,1509702478.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:59.229Z,1509702479.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:59.236Z,1509702479.236 [PNI_TCM](ERROR): CRC does not match. Expected:0x9526 got:0x16864
2017-11-03T09:47:59.298Z,1509702479.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:47:59.615Z,1509702479.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:47:59.643Z,1509702479.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:00.026Z,1509702480.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:00.086Z,1509702480.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:00.402Z,1509702480.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:00.470Z,1509702480.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:00.802Z,1509702480.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:00.810Z,1509702480.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x39382 got:0x16911
2017-11-03T09:48:00.847Z,1509702480.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:01.217Z,1509702481.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:01.247Z,1509702481.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:01.627Z,1509702481.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:01.643Z,1509702481.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:02.015Z,1509702482.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:02.041Z,1509702482.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:02.404Z,1509702482.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:02.436Z,1509702482.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:02.803Z,1509702482.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:02.855Z,1509702482.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:03.217Z,1509702483.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:03.241Z,1509702483.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:03.616Z,1509702483.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:03.666Z,1509702483.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:04.017Z,1509702484.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:04.045Z,1509702484.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:04.403Z,1509702484.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:04.418Z,1509702484.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:04.806Z,1509702484.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:04.843Z,1509702484.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:05.216Z,1509702485.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:05.243Z,1509702485.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:05.616Z,1509702485.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:05.708Z,1509702485.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:06.017Z,1509702486.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:06.051Z,1509702486.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:06.405Z,1509702486.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:06.420Z,1509702486.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:06.804Z,1509702486.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:06.850Z,1509702486.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:07.218Z,1509702487.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:07.233Z,1509702487.233 [PNI_TCM](ERROR): CRC does not match. Expected:0x21695 got:0x16909
2017-11-03T09:48:07.258Z,1509702487.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:07.624Z,1509702487.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:07.651Z,1509702487.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:08.018Z,1509702488.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:08.041Z,1509702488.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:08.402Z,1509702488.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:08.447Z,1509702488.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:08.805Z,1509702488.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:08.813Z,1509702488.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x29794 got:0x49818
2017-11-03T09:48:08.850Z,1509702488.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:09.214Z,1509702489.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:09.269Z,1509702489.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:09.621Z,1509702489.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:09.651Z,1509702489.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:10.019Z,1509702490.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:10.043Z,1509702490.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:10.403Z,1509702490.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:10.419Z,1509702490.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:10.806Z,1509702490.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:10.821Z,1509702490.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:11.217Z,1509702491.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:11.241Z,1509702491.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:11.616Z,1509702491.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:11.644Z,1509702491.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:12.019Z,1509702492.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:12.071Z,1509702492.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:12.407Z,1509702492.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:12.426Z,1509702492.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:12.808Z,1509702492.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:12.866Z,1509702492.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:13.219Z,1509702493.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:13.251Z,1509702493.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:13.617Z,1509702493.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:13.652Z,1509702493.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:14.018Z,1509702494.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:14.067Z,1509702494.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:14.407Z,1509702494.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:14.423Z,1509702494.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:14.804Z,1509702494.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:14.862Z,1509702494.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:15.219Z,1509702495.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:15.225Z,1509702495.225 [PNI_TCM](ERROR): CRC does not match. Expected:0x31889 got:0x49818
2017-11-03T09:48:15.290Z,1509702495.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:15.617Z,1509702495.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:15.645Z,1509702495.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:16.021Z,1509702496.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:16.049Z,1509702496.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:16.405Z,1509702496.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:16.446Z,1509702496.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:16.807Z,1509702496.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:16.814Z,1509702496.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x29792 got:0x49818
2017-11-03T09:48:16.858Z,1509702496.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:17.217Z,1509702497.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:17.251Z,1509702497.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:17.618Z,1509702497.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:17.645Z,1509702497.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:18.019Z,1509702498.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:18.052Z,1509702498.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:18.406Z,1509702498.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:18.421Z,1509702498.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:18.421Z,1509702498.421 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 191
2017-11-03T09:48:18.422Z,1509702498.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:48:18.423Z,1509702498.423 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:18.423Z,1509702498.423 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 191
2017-11-03T09:48:18.423Z,1509702498.423 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:48:18.426Z,1509702498.426 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:18.426Z,1509702498.426 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 191
2017-11-03T09:48:18.426Z,1509702498.426 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:48:18.542Z,1509702498.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:48:18.542Z,1509702498.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:48:18.542Z,1509702498.542 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:48:18.811Z,1509702498.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:18.928Z,1509702498.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:48:18.929Z,1509702498.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 191
2017-11-03T09:48:18.929Z,1509702498.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:48:18.929Z,1509702498.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 191
2017-11-03T09:48:18.930Z,1509702498.930 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:48:18.930Z,1509702498.930 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 191
2017-11-03T09:48:19.213Z,1509702499.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:19.227Z,1509702499.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:48:19.228Z,1509702499.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:48:19.228Z,1509702499.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:48:19.229Z,1509702499.229 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:48:19.229Z,1509702499.229 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:48:19.230Z,1509702499.230 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:48:19.230Z,1509702499.230 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:48:19.230Z,1509702499.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:48:19.231Z,1509702499.231 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:48:19.614Z,1509702499.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:19.630Z,1509702499.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:48:19.631Z,1509702499.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:20.015Z,1509702500.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:20.030Z,1509702500.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:48:20.031Z,1509702500.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:20.412Z,1509702500.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:20.427Z,1509702500.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:48:20.428Z,1509702500.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:20.807Z,1509702500.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:20.822Z,1509702500.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:48:20.823Z,1509702500.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:21.216Z,1509702501.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:21.231Z,1509702501.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:48:21.232Z,1509702501.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:21.615Z,1509702501.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:21.634Z,1509702501.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:48:21.635Z,1509702501.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:22.017Z,1509702502.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:22.038Z,1509702502.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:48:22.039Z,1509702502.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:22.411Z,1509702502.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:22.430Z,1509702502.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:48:22.431Z,1509702502.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:22.809Z,1509702502.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:22.851Z,1509702502.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:48:22.852Z,1509702502.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:23.218Z,1509702503.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:23.225Z,1509702503.225 [PNI_TCM](ERROR): CRC does not match. Expected:0x51896 got:0x57152
2017-11-03T09:48:23.255Z,1509702503.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:48:23.256Z,1509702503.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:23.616Z,1509702503.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:23.630Z,1509702503.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:48:23.631Z,1509702503.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:24.014Z,1509702504.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:24.029Z,1509702504.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:48:24.030Z,1509702504.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:24.413Z,1509702504.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:24.451Z,1509702504.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:48:24.452Z,1509702504.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:24.810Z,1509702504.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:24.817Z,1509702504.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x64143 got:0x57152
2017-11-03T09:48:24.857Z,1509702504.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:48:24.858Z,1509702504.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:25.214Z,1509702505.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:25.229Z,1509702505.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T09:48:25.230Z,1509702505.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:25.617Z,1509702505.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:25.631Z,1509702505.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:48:25.632Z,1509702505.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:26.016Z,1509702506.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:26.031Z,1509702506.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T09:48:26.032Z,1509702506.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:26.411Z,1509702506.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:26.426Z,1509702506.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T09:48:26.427Z,1509702506.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:26.815Z,1509702506.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:26.834Z,1509702506.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T09:48:26.835Z,1509702506.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:27.214Z,1509702507.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:27.302Z,1509702507.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-03T09:48:27.302Z,1509702507.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:27.623Z,1509702507.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:27.645Z,1509702507.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T09:48:27.646Z,1509702507.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:28.027Z,1509702508.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:28.046Z,1509702508.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T09:48:28.047Z,1509702508.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:28.411Z,1509702508.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:28.470Z,1509702508.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T09:48:28.471Z,1509702508.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:28.811Z,1509702508.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:28.830Z,1509702508.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T09:48:28.831Z,1509702508.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:29.219Z,1509702509.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:29.263Z,1509702509.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T09:48:29.263Z,1509702509.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:29.623Z,1509702509.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:29.674Z,1509702509.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T09:48:29.674Z,1509702509.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:30.021Z,1509702510.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:30.036Z,1509702510.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T09:48:30.037Z,1509702510.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:30.413Z,1509702510.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:30.427Z,1509702510.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T09:48:30.429Z,1509702510.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:30.811Z,1509702510.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:30.846Z,1509702510.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T09:48:30.847Z,1509702510.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:31.223Z,1509702511.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:31.230Z,1509702511.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x60898 got:0x57344
2017-11-03T09:48:31.263Z,1509702511.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T09:48:31.265Z,1509702511.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:31.625Z,1509702511.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:31.646Z,1509702511.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T09:48:31.647Z,1509702511.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:32.017Z,1509702512.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:32.032Z,1509702512.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T09:48:32.033Z,1509702512.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:32.414Z,1509702512.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:32.430Z,1509702512.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T09:48:32.431Z,1509702512.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:32.797Z,1509702512.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:32.820Z,1509702512.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T09:48:32.821Z,1509702512.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:33.222Z,1509702513.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:33.236Z,1509702513.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T09:48:33.237Z,1509702513.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:33.625Z,1509702513.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:33.639Z,1509702513.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T09:48:33.641Z,1509702513.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:34.025Z,1509702514.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:34.040Z,1509702514.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T09:48:34.041Z,1509702514.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:34.415Z,1509702514.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:34.430Z,1509702514.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T09:48:34.430Z,1509702514.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:34.803Z,1509702514.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:34.834Z,1509702514.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T09:48:34.835Z,1509702514.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:35.219Z,1509702515.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:35.233Z,1509702515.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T09:48:35.234Z,1509702515.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:35.625Z,1509702515.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:35.640Z,1509702515.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T09:48:35.641Z,1509702515.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:36.024Z,1509702516.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:36.039Z,1509702516.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T09:48:36.040Z,1509702516.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:36.406Z,1509702516.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:36.438Z,1509702516.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T09:48:36.439Z,1509702516.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:36.804Z,1509702516.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:36.838Z,1509702516.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T09:48:36.839Z,1509702516.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:37.226Z,1509702517.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:37.240Z,1509702517.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T09:48:37.241Z,1509702517.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:37.628Z,1509702517.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:37.643Z,1509702517.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T09:48:37.644Z,1509702517.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:38.022Z,1509702518.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:38.042Z,1509702518.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T09:48:38.043Z,1509702518.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:38.404Z,1509702518.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:38.430Z,1509702518.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:38.803Z,1509702518.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:38.834Z,1509702518.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:39.225Z,1509702519.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:39.247Z,1509702519.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:39.622Z,1509702519.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:39.639Z,1509702519.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:40.027Z,1509702520.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:40.043Z,1509702520.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:40.402Z,1509702520.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:40.431Z,1509702520.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:40.805Z,1509702520.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:40.832Z,1509702520.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:41.223Z,1509702521.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:41.255Z,1509702521.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:41.626Z,1509702521.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:41.690Z,1509702521.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:42.025Z,1509702522.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:42.040Z,1509702522.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:42.405Z,1509702522.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:42.433Z,1509702522.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:42.806Z,1509702522.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:42.874Z,1509702522.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:43.222Z,1509702523.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:43.237Z,1509702523.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:43.618Z,1509702523.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:43.672Z,1509702523.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:44.024Z,1509702524.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:44.082Z,1509702524.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:44.403Z,1509702524.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:44.430Z,1509702524.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:44.803Z,1509702524.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:44.830Z,1509702524.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:45.225Z,1509702525.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:45.240Z,1509702525.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:45.623Z,1509702525.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:45.643Z,1509702525.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:46.026Z,1509702526.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:46.046Z,1509702526.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:46.405Z,1509702526.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:46.430Z,1509702526.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:46.801Z,1509702526.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:46.833Z,1509702526.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:47.224Z,1509702527.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:47.238Z,1509702527.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:47.617Z,1509702527.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:47.633Z,1509702527.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:48.021Z,1509702528.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:48.036Z,1509702528.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:48.404Z,1509702528.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:48.433Z,1509702528.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:48.797Z,1509702528.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:48.827Z,1509702528.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:49.221Z,1509702529.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:49.228Z,1509702529.228 [PNI_TCM](ERROR): CRC does not match. Expected:0x18663 got:0x56349
2017-11-03T09:48:49.254Z,1509702529.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:49.625Z,1509702529.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:49.640Z,1509702529.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:50.025Z,1509702530.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:50.040Z,1509702530.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:50.403Z,1509702530.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:50.430Z,1509702530.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:50.799Z,1509702530.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:50.830Z,1509702530.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:51.226Z,1509702531.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:51.241Z,1509702531.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:51.629Z,1509702531.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:51.644Z,1509702531.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:52.024Z,1509702532.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:52.046Z,1509702532.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:52.406Z,1509702532.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:52.439Z,1509702532.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:52.805Z,1509702532.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:52.831Z,1509702532.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:53.220Z,1509702533.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:53.243Z,1509702533.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:56.325Z,1509702536.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:56.402Z,1509702536.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:56.561Z,1509702536.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:56.592Z,1509702536.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:56.938Z,1509702536.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:56.991Z,1509702536.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:57.343Z,1509702537.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:57.363Z,1509702537.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:57.741Z,1509702537.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:57.822Z,1509702537.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:58.140Z,1509702538.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:58.186Z,1509702538.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:58.554Z,1509702538.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:58.584Z,1509702538.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:58.953Z,1509702538.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:58.989Z,1509702538.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:59.353Z,1509702539.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:59.368Z,1509702539.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:48:59.740Z,1509702539.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:48:59.755Z,1509702539.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:00.147Z,1509702540.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:00.167Z,1509702540.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:00.541Z,1509702540.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:00.555Z,1509702540.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:00.940Z,1509702540.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:00.955Z,1509702540.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:01.353Z,1509702541.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:01.385Z,1509702541.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:01.757Z,1509702541.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:01.788Z,1509702541.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:02.157Z,1509702542.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:02.187Z,1509702542.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:02.546Z,1509702542.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:02.561Z,1509702542.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:02.944Z,1509702542.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:02.959Z,1509702542.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:03.344Z,1509702543.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:03.359Z,1509702543.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:03.745Z,1509702543.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:03.767Z,1509702543.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:04.144Z,1509702544.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:04.159Z,1509702544.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:04.558Z,1509702544.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:04.586Z,1509702544.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:04.957Z,1509702544.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:04.987Z,1509702544.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:05.357Z,1509702545.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:05.387Z,1509702545.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:05.744Z,1509702545.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:05.760Z,1509702545.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:06.144Z,1509702546.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:06.159Z,1509702546.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:06.545Z,1509702546.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:06.566Z,1509702546.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:06.945Z,1509702546.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:06.960Z,1509702546.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:07.357Z,1509702547.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:07.387Z,1509702547.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:07.757Z,1509702547.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:07.787Z,1509702547.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:08.150Z,1509702548.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:08.186Z,1509702548.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:08.545Z,1509702548.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:08.567Z,1509702548.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:08.949Z,1509702548.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:08.963Z,1509702548.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:09.345Z,1509702549.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:09.360Z,1509702549.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:09.745Z,1509702549.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:09.761Z,1509702549.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:10.144Z,1509702550.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:10.166Z,1509702550.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:10.549Z,1509702550.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:10.626Z,1509702550.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:10.957Z,1509702550.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:10.979Z,1509702550.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:11.358Z,1509702551.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:11.406Z,1509702551.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:11.751Z,1509702551.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:11.771Z,1509702551.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:12.151Z,1509702552.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:12.210Z,1509702552.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:12.552Z,1509702552.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:12.600Z,1509702552.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:12.951Z,1509702552.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:12.971Z,1509702552.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:13.356Z,1509702553.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:13.371Z,1509702553.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:13.757Z,1509702553.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:13.772Z,1509702553.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:14.156Z,1509702554.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:14.171Z,1509702554.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:14.551Z,1509702554.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:14.571Z,1509702554.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:14.944Z,1509702554.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:14.966Z,1509702554.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:15.351Z,1509702555.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:15.371Z,1509702555.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:15.751Z,1509702555.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:15.767Z,1509702555.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:16.151Z,1509702556.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:16.166Z,1509702556.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:16.556Z,1509702556.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:16.579Z,1509702556.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:16.957Z,1509702556.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:16.972Z,1509702556.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:17.357Z,1509702557.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:17.378Z,1509702557.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:17.746Z,1509702557.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:17.761Z,1509702557.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:18.151Z,1509702558.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:18.171Z,1509702558.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:18.552Z,1509702558.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:18.567Z,1509702558.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:18.951Z,1509702558.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:18.971Z,1509702558.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:19.356Z,1509702559.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:19.379Z,1509702559.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:19.757Z,1509702559.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:19.772Z,1509702559.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:20.156Z,1509702560.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:20.171Z,1509702560.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:20.551Z,1509702560.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:20.566Z,1509702560.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:20.952Z,1509702560.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:20.966Z,1509702560.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:21.351Z,1509702561.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:21.371Z,1509702561.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:21.751Z,1509702561.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:21.771Z,1509702561.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:22.152Z,1509702562.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:22.174Z,1509702562.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:22.561Z,1509702562.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:22.576Z,1509702562.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:22.960Z,1509702562.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:22.975Z,1509702562.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:23.361Z,1509702563.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:23.382Z,1509702563.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:23.751Z,1509702563.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:23.766Z,1509702563.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:24.151Z,1509702564.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:24.171Z,1509702564.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:24.553Z,1509702564.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:24.574Z,1509702564.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:24.946Z,1509702564.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:25.019Z,1509702565.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:25.361Z,1509702565.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:25.383Z,1509702565.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:25.765Z,1509702565.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:25.804Z,1509702565.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:26.160Z,1509702566.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:26.183Z,1509702566.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:26.551Z,1509702566.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:26.610Z,1509702566.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:26.938Z,1509702566.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:26.964Z,1509702566.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:27.354Z,1509702567.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:27.410Z,1509702567.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:27.754Z,1509702567.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:27.769Z,1509702567.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:28.158Z,1509702568.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:28.172Z,1509702568.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:28.563Z,1509702568.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:28.583Z,1509702568.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:28.966Z,1509702568.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:28.981Z,1509702568.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:29.366Z,1509702569.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:29.381Z,1509702569.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:29.740Z,1509702569.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:29.768Z,1509702569.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:30.152Z,1509702570.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:30.168Z,1509702570.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:30.553Z,1509702570.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:30.569Z,1509702570.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:30.953Z,1509702570.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:30.969Z,1509702570.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:31.362Z,1509702571.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:31.383Z,1509702571.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:31.765Z,1509702571.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:31.781Z,1509702571.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:32.162Z,1509702572.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:32.178Z,1509702572.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:32.551Z,1509702572.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:32.575Z,1509702572.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:32.952Z,1509702572.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:32.967Z,1509702572.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:33.351Z,1509702573.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:33.367Z,1509702573.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:33.751Z,1509702573.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:33.767Z,1509702573.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:34.151Z,1509702574.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:34.166Z,1509702574.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:34.565Z,1509702574.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:34.581Z,1509702574.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:34.965Z,1509702574.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:34.981Z,1509702574.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:35.365Z,1509702575.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:35.387Z,1509702575.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:35.743Z,1509702575.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:35.769Z,1509702575.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:36.143Z,1509702576.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:36.169Z,1509702576.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:36.543Z,1509702576.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:36.574Z,1509702576.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:36.943Z,1509702576.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:36.970Z,1509702576.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:37.362Z,1509702577.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:37.377Z,1509702577.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:37.765Z,1509702577.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:37.787Z,1509702577.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:38.162Z,1509702578.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:38.177Z,1509702578.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:38.537Z,1509702578.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:38.564Z,1509702578.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:38.937Z,1509702578.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:38.990Z,1509702578.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:39.343Z,1509702579.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:39.395Z,1509702579.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:39.744Z,1509702579.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:39.769Z,1509702579.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:40.143Z,1509702580.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:40.195Z,1509702580.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:40.561Z,1509702580.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:40.576Z,1509702580.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:40.965Z,1509702580.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:41.022Z,1509702581.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:41.365Z,1509702581.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:41.416Z,1509702581.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:41.743Z,1509702581.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:41.769Z,1509702581.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:42.143Z,1509702582.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:42.169Z,1509702582.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:42.544Z,1509702582.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:42.570Z,1509702582.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:42.943Z,1509702582.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:42.975Z,1509702582.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:43.361Z,1509702583.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:43.377Z,1509702583.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:43.759Z,1509702583.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:43.774Z,1509702583.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:44.159Z,1509702584.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:44.174Z,1509702584.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:44.540Z,1509702584.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:44.571Z,1509702584.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:44.937Z,1509702584.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:44.952Z,1509702584.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:45.343Z,1509702585.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:45.374Z,1509702585.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:45.744Z,1509702585.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:45.775Z,1509702585.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:46.143Z,1509702586.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:46.175Z,1509702586.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:46.260Z,1509702586.260 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:49:46.260Z,1509702586.260 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T09:49:46.562Z,1509702586.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:46.578Z,1509702586.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:46.590Z,1509702586.590 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:49:46.591Z,1509702586.591 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:49:46.591Z,1509702586.591 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:49:46.591Z,1509702586.591 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:49:46.971Z,1509702586.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:46.986Z,1509702586.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:47.353Z,1509702587.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:47.386Z,1509702587.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:47.740Z,1509702587.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:47.756Z,1509702587.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:48.147Z,1509702588.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:48.163Z,1509702588.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:48.548Z,1509702588.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:48.567Z,1509702588.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:48.944Z,1509702588.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:48.959Z,1509702588.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:49.357Z,1509702589.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:49.388Z,1509702589.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:49.756Z,1509702589.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:49.788Z,1509702589.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:50.158Z,1509702590.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:50.188Z,1509702590.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:50.544Z,1509702590.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:50.559Z,1509702590.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:50.731Z,1509702590.731 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:49:50.787Z,1509702590.787 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:49:50.789Z,1509702590.789 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:49:50.789Z,1509702590.789 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:49:50.790Z,1509702590.790 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:49:50.956Z,1509702590.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:50.991Z,1509702590.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:51.344Z,1509702591.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:51.361Z,1509702591.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:51.745Z,1509702591.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:51.761Z,1509702591.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:52.145Z,1509702592.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:52.161Z,1509702592.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:52.557Z,1509702592.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:52.587Z,1509702592.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:52.957Z,1509702592.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:52.987Z,1509702592.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:53.366Z,1509702593.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:53.415Z,1509702593.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:56.454Z,1509702596.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:56.503Z,1509702596.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:56.628Z,1509702596.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:56.675Z,1509702596.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:57.051Z,1509702597.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:57.067Z,1509702597.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:57.457Z,1509702597.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:57.515Z,1509702597.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:57.856Z,1509702597.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:57.879Z,1509702597.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:58.228Z,1509702598.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:58.293Z,1509702598.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:58.626Z,1509702598.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:58.689Z,1509702598.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:59.028Z,1509702599.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:59.054Z,1509702599.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:59.453Z,1509702599.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:59.468Z,1509702599.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:49:59.849Z,1509702599.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:49:59.865Z,1509702599.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:00.249Z,1509702600.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:00.264Z,1509702600.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:00.665Z,1509702600.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:00.702Z,1509702600.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:01.031Z,1509702601.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:01.057Z,1509702601.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:01.432Z,1509702601.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:01.457Z,1509702601.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:01.831Z,1509702601.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:01.858Z,1509702601.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:02.249Z,1509702602.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:02.271Z,1509702602.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:02.665Z,1509702602.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:02.708Z,1509702602.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:03.050Z,1509702603.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:03.065Z,1509702603.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:03.432Z,1509702603.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:03.457Z,1509702603.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:03.831Z,1509702603.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:03.856Z,1509702603.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:04.254Z,1509702604.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:04.269Z,1509702604.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:04.680Z,1509702604.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:04.703Z,1509702604.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:05.037Z,1509702605.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:05.070Z,1509702605.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:05.430Z,1509702605.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:05.461Z,1509702605.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:05.831Z,1509702605.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:05.866Z,1509702605.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:06.237Z,1509702606.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:06.263Z,1509702606.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:06.678Z,1509702606.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:06.723Z,1509702606.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:07.042Z,1509702607.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:07.075Z,1509702607.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:07.429Z,1509702607.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:07.466Z,1509702607.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:07.831Z,1509702607.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:07.863Z,1509702607.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:08.242Z,1509702608.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:08.267Z,1509702608.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:08.641Z,1509702608.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:08.731Z,1509702608.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:09.045Z,1509702609.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:09.081Z,1509702609.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:09.432Z,1509702609.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:09.448Z,1509702609.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:09.868Z,1509702609.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:09.883Z,1509702609.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:10.246Z,1509702610.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:10.273Z,1509702610.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:10.645Z,1509702610.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:10.734Z,1509702610.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:11.038Z,1509702611.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:11.053Z,1509702611.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:11.438Z,1509702611.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:11.453Z,1509702611.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:11.833Z,1509702611.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:11.890Z,1509702611.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:12.249Z,1509702612.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:12.281Z,1509702612.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:12.649Z,1509702612.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:12.706Z,1509702612.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:13.038Z,1509702613.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:13.090Z,1509702613.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:13.449Z,1509702613.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:13.465Z,1509702613.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:13.838Z,1509702613.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:13.858Z,1509702613.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:14.249Z,1509702614.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:14.271Z,1509702614.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:14.653Z,1509702614.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:14.669Z,1509702614.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:15.054Z,1509702615.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:15.075Z,1509702615.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:15.449Z,1509702615.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:15.464Z,1509702615.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:15.839Z,1509702615.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:15.856Z,1509702615.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:16.240Z,1509702616.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:16.257Z,1509702616.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:16.669Z,1509702616.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:16.712Z,1509702616.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:17.036Z,1509702617.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:17.061Z,1509702617.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:17.452Z,1509702617.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:17.468Z,1509702617.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:17.852Z,1509702617.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:17.921Z,1509702617.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:18.249Z,1509702618.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:18.266Z,1509702618.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:18.672Z,1509702618.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:18.721Z,1509702618.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:19.036Z,1509702619.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:19.058Z,1509702619.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:19.437Z,1509702619.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:19.452Z,1509702619.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:19.839Z,1509702619.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:19.854Z,1509702619.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:20.249Z,1509702620.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:20.264Z,1509702620.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:20.680Z,1509702620.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:20.727Z,1509702620.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:21.049Z,1509702621.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:21.065Z,1509702621.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:21.439Z,1509702621.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:21.455Z,1509702621.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:21.836Z,1509702621.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:21.863Z,1509702621.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:22.252Z,1509702622.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:22.271Z,1509702622.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:22.705Z,1509702622.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:22.762Z,1509702622.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:23.048Z,1509702623.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:23.064Z,1509702623.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:23.439Z,1509702623.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:23.455Z,1509702623.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:23.839Z,1509702623.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:23.859Z,1509702623.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:24.245Z,1509702624.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:24.267Z,1509702624.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:24.652Z,1509702624.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:24.674Z,1509702624.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:25.051Z,1509702625.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:25.110Z,1509702625.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:25.428Z,1509702625.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:25.463Z,1509702625.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:25.828Z,1509702625.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:25.858Z,1509702625.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:26.228Z,1509702626.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:26.293Z,1509702626.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:26.629Z,1509702626.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:26.655Z,1509702626.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:27.023Z,1509702627.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:27.074Z,1509702627.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:27.449Z,1509702627.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:27.506Z,1509702627.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:27.849Z,1509702627.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:27.864Z,1509702627.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:28.249Z,1509702628.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:28.264Z,1509702628.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:28.635Z,1509702628.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:28.661Z,1509702628.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:29.028Z,1509702629.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:29.058Z,1509702629.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:29.428Z,1509702629.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:29.462Z,1509702629.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:29.831Z,1509702629.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:29.863Z,1509702629.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:30.249Z,1509702630.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:30.265Z,1509702630.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:30.681Z,1509702630.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:30.715Z,1509702630.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:31.050Z,1509702631.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:31.066Z,1509702631.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:31.430Z,1509702631.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:31.456Z,1509702631.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:31.831Z,1509702631.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:31.857Z,1509702631.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:32.249Z,1509702632.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:32.271Z,1509702632.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:32.703Z,1509702632.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:32.721Z,1509702632.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:33.049Z,1509702633.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:33.075Z,1509702633.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:33.430Z,1509702633.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:33.456Z,1509702633.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:33.825Z,1509702633.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:33.857Z,1509702633.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:34.250Z,1509702634.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:34.268Z,1509702634.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:34.678Z,1509702634.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:34.722Z,1509702634.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:35.050Z,1509702635.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:35.065Z,1509702635.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:35.430Z,1509702635.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:35.462Z,1509702635.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:35.829Z,1509702635.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:35.861Z,1509702635.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:36.241Z,1509702636.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:36.269Z,1509702636.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:36.641Z,1509702636.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:36.749Z,1509702636.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:37.046Z,1509702637.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:37.077Z,1509702637.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:37.432Z,1509702637.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:37.447Z,1509702637.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:37.835Z,1509702637.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:37.850Z,1509702637.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:38.241Z,1509702638.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:38.273Z,1509702638.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:38.645Z,1509702638.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:38.695Z,1509702638.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:39.064Z,1509702639.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:39.079Z,1509702639.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:39.432Z,1509702639.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:39.499Z,1509702639.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:39.834Z,1509702639.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:39.849Z,1509702639.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:40.236Z,1509702640.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:40.283Z,1509702640.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:40.637Z,1509702640.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:40.652Z,1509702640.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:41.034Z,1509702641.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:41.083Z,1509702641.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:41.452Z,1509702641.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:41.498Z,1509702641.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:41.849Z,1509702641.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:41.864Z,1509702641.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:42.249Z,1509702642.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:42.264Z,1509702642.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:42.627Z,1509702642.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:42.653Z,1509702642.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:43.038Z,1509702643.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:43.053Z,1509702643.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:43.448Z,1509702643.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:43.463Z,1509702643.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:43.837Z,1509702643.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:43.855Z,1509702643.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:44.249Z,1509702644.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:44.264Z,1509702644.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:44.667Z,1509702644.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:44.708Z,1509702644.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:45.041Z,1509702645.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:45.066Z,1509702645.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:45.430Z,1509702645.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:45.461Z,1509702645.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:45.852Z,1509702645.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:45.867Z,1509702645.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:46.241Z,1509702646.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:46.270Z,1509702646.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:46.672Z,1509702646.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:46.712Z,1509702646.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:47.041Z,1509702647.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:47.066Z,1509702647.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:47.432Z,1509702647.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:47.447Z,1509702647.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:47.831Z,1509702647.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:47.847Z,1509702647.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:48.241Z,1509702648.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:48.273Z,1509702648.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:48.693Z,1509702648.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:48.739Z,1509702648.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:49.045Z,1509702649.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:49.070Z,1509702649.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:49.434Z,1509702649.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:49.449Z,1509702649.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:49.831Z,1509702649.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:49.847Z,1509702649.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:50.246Z,1509702650.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:50.269Z,1509702650.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:50.649Z,1509702650.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:50.727Z,1509702650.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:51.046Z,1509702651.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:51.071Z,1509702651.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:51.429Z,1509702651.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:51.445Z,1509702651.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:51.829Z,1509702651.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:51.890Z,1509702651.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:52.245Z,1509702652.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:52.279Z,1509702652.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:52.645Z,1509702652.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:52.677Z,1509702652.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:53.049Z,1509702653.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:53.074Z,1509702653.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:53.437Z,1509702653.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:53.496Z,1509702653.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:59.174Z,1509702659.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:59.218Z,1509702659.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:59.395Z,1509702659.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:59.439Z,1509702659.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:50:59.781Z,1509702659.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:50:59.830Z,1509702659.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:00.183Z,1509702660.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:00.241Z,1509702660.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:00.556Z,1509702660.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:00.642Z,1509702660.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:00.959Z,1509702660.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:01.007Z,1509702661.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:01.356Z,1509702661.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:01.401Z,1509702661.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:01.766Z,1509702661.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:01.809Z,1509702661.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:02.162Z,1509702662.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:02.207Z,1509702662.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:02.616Z,1509702662.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:02.706Z,1509702662.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:03.005Z,1509702663.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:03.071Z,1509702663.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:03.402Z,1509702663.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:03.495Z,1509702663.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:03.763Z,1509702663.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:03.819Z,1509702663.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:04.197Z,1509702664.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:04.267Z,1509702664.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:04.569Z,1509702664.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:04.615Z,1509702664.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:04.965Z,1509702664.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:05.013Z,1509702665.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:05.376Z,1509702665.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:05.417Z,1509702665.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:05.779Z,1509702665.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:05.808Z,1509702665.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:06.194Z,1509702666.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:06.222Z,1509702666.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:06.565Z,1509702666.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:06.608Z,1509702666.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:06.982Z,1509702666.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:07.048Z,1509702667.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:07.366Z,1509702667.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:07.406Z,1509702667.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:07.766Z,1509702667.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:07.817Z,1509702667.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:08.163Z,1509702668.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:08.179Z,1509702668.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:08.568Z,1509702668.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:08.587Z,1509702668.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:08.972Z,1509702668.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:08.992Z,1509702668.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:09.385Z,1509702669.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:09.418Z,1509702669.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:09.764Z,1509702669.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:09.795Z,1509702669.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:10.165Z,1509702670.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:10.195Z,1509702670.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:10.557Z,1509702670.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:10.632Z,1509702670.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:10.959Z,1509702670.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:11.002Z,1509702671.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:11.376Z,1509702671.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:11.400Z,1509702671.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:11.781Z,1509702671.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:11.805Z,1509702671.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:12.176Z,1509702672.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:12.196Z,1509702672.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:12.556Z,1509702672.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:12.658Z,1509702672.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:12.966Z,1509702672.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:13.001Z,1509702673.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:13.363Z,1509702673.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:13.397Z,1509702673.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:13.755Z,1509702673.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:13.771Z,1509702673.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:14.156Z,1509702674.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:14.171Z,1509702674.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:14.569Z,1509702674.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:14.646Z,1509702674.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:14.977Z,1509702674.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:15.055Z,1509702675.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:15.382Z,1509702675.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:15.398Z,1509702675.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:15.756Z,1509702675.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:15.826Z,1509702675.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:16.156Z,1509702676.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:16.183Z,1509702676.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:16.559Z,1509702676.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:16.669Z,1509702676.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:16.956Z,1509702676.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:17.026Z,1509702677.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:17.378Z,1509702677.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:17.393Z,1509702677.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:17.782Z,1509702677.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:17.797Z,1509702677.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:18.178Z,1509702678.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:18.193Z,1509702678.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:18.556Z,1509702678.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:18.583Z,1509702678.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:18.955Z,1509702678.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:18.982Z,1509702678.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:19.359Z,1509702679.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:19.385Z,1509702679.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:19.385Z,1509702679.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 192
2017-11-03T09:51:19.385Z,1509702679.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:51:19.387Z,1509702679.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:19.387Z,1509702679.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 192
2017-11-03T09:51:19.387Z,1509702679.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:51:19.389Z,1509702679.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:19.389Z,1509702679.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 192
2017-11-03T09:51:19.389Z,1509702679.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:51:19.473Z,1509702679.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:51:19.473Z,1509702679.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:51:19.473Z,1509702679.473 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:51:19.762Z,1509702679.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:19.868Z,1509702679.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:51:19.869Z,1509702679.869 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 192
2017-11-03T09:51:19.869Z,1509702679.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:51:19.869Z,1509702679.869 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 192
2017-11-03T09:51:19.870Z,1509702679.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:51:19.870Z,1509702679.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 192
2017-11-03T09:51:20.161Z,1509702680.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:20.175Z,1509702680.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:51:20.176Z,1509702680.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:51:20.176Z,1509702680.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:51:20.188Z,1509702680.188 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:51:20.189Z,1509702680.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:51:20.189Z,1509702680.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:51:20.190Z,1509702680.190 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:51:20.190Z,1509702680.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:51:20.190Z,1509702680.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:51:20.574Z,1509702680.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:20.604Z,1509702680.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:20.982Z,1509702680.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:21.004Z,1509702681.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:21.373Z,1509702681.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:21.403Z,1509702681.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:21.761Z,1509702681.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:21.777Z,1509702681.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:22.163Z,1509702682.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:22.179Z,1509702682.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:22.563Z,1509702682.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:22.579Z,1509702682.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:22.960Z,1509702682.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:22.975Z,1509702682.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:23.377Z,1509702683.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:23.407Z,1509702683.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:23.773Z,1509702683.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:23.808Z,1509702683.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:24.178Z,1509702684.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:24.202Z,1509702684.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:24.566Z,1509702684.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:24.581Z,1509702684.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:24.967Z,1509702684.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:24.983Z,1509702684.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:25.374Z,1509702685.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:25.395Z,1509702685.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:25.767Z,1509702685.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:25.783Z,1509702685.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:26.169Z,1509702686.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:26.186Z,1509702686.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:26.573Z,1509702686.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:26.634Z,1509702686.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:26.972Z,1509702686.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:26.995Z,1509702686.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:27.374Z,1509702687.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:27.391Z,1509702687.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:27.767Z,1509702687.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:27.788Z,1509702687.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:28.164Z,1509702688.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:28.235Z,1509702688.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:28.558Z,1509702688.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:28.607Z,1509702688.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:28.960Z,1509702688.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:29.015Z,1509702689.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:29.373Z,1509702689.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:29.412Z,1509702689.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:29.773Z,1509702689.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:29.826Z,1509702689.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:30.174Z,1509702690.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:30.227Z,1509702690.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:30.560Z,1509702690.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:30.576Z,1509702690.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:30.955Z,1509702690.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:30.987Z,1509702690.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:31.355Z,1509702691.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:31.386Z,1509702691.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:31.757Z,1509702691.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:31.784Z,1509702691.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:32.159Z,1509702692.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:32.190Z,1509702692.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:32.578Z,1509702692.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:32.593Z,1509702692.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:32.981Z,1509702692.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:32.996Z,1509702692.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:33.379Z,1509702693.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:33.394Z,1509702693.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:33.758Z,1509702693.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:33.777Z,1509702693.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:34.165Z,1509702694.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:34.180Z,1509702694.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:34.554Z,1509702694.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:34.569Z,1509702694.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:34.951Z,1509702694.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:34.971Z,1509702694.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:35.369Z,1509702695.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:35.391Z,1509702695.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:35.769Z,1509702695.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:35.791Z,1509702695.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:36.222Z,1509702696.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:36.237Z,1509702696.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:36.556Z,1509702696.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:36.571Z,1509702696.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:36.957Z,1509702696.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:36.973Z,1509702696.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:37.359Z,1509702697.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:37.379Z,1509702697.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:37.758Z,1509702697.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:37.774Z,1509702697.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:38.153Z,1509702698.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:38.168Z,1509702698.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:38.570Z,1509702698.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:38.591Z,1509702698.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:38.973Z,1509702698.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:38.989Z,1509702698.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:39.370Z,1509702699.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:39.391Z,1509702699.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:39.752Z,1509702699.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:39.768Z,1509702699.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:40.156Z,1509702700.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:40.173Z,1509702700.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:40.558Z,1509702700.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:40.604Z,1509702700.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:40.955Z,1509702700.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:40.999Z,1509702700.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:41.365Z,1509702701.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:41.382Z,1509702701.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:41.769Z,1509702701.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:41.819Z,1509702701.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:42.195Z,1509702702.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:42.216Z,1509702702.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:42.556Z,1509702702.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:42.608Z,1509702702.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:42.957Z,1509702702.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:42.996Z,1509702702.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:43.355Z,1509702703.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:43.375Z,1509702703.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:43.756Z,1509702703.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:43.779Z,1509702703.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:44.155Z,1509702704.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:44.183Z,1509702704.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:44.566Z,1509702704.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:44.587Z,1509702704.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:44.970Z,1509702704.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:44.991Z,1509702704.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:45.370Z,1509702705.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:45.391Z,1509702705.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:45.755Z,1509702705.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:45.778Z,1509702705.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:46.157Z,1509702706.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:46.172Z,1509702706.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:46.558Z,1509702706.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:46.573Z,1509702706.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:46.950Z,1509702706.950 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:51:46.951Z,1509702706.951 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T09:51:46.951Z,1509702706.951 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:51:46.971Z,1509702706.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:47.014Z,1509702707.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:51:47.015Z,1509702707.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:47.101Z,1509702707.101 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:51:47.352Z,1509702707.352 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:51:47.398Z,1509702707.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:47.428Z,1509702707.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T09:51:47.430Z,1509702707.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:47.557Z,1509702707.557 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:51:47.781Z,1509702707.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:47.814Z,1509702707.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:51:47.816Z,1509702707.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:48.174Z,1509702708.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:48.204Z,1509702708.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:51:48.206Z,1509702708.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:48.561Z,1509702708.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:48.576Z,1509702708.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:51:48.577Z,1509702708.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:48.961Z,1509702708.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:48.975Z,1509702708.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T09:51:48.976Z,1509702708.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:49.090Z,1509702709.090 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:51:49.090Z,1509702709.090 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T09:51:49.172Z,1509702709.172 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:51:49.173Z,1509702709.173 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:51:49.173Z,1509702709.173 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:51:49.173Z,1509702709.173 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:51:49.364Z,1509702709.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:49.379Z,1509702709.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T09:51:49.380Z,1509702709.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:49.761Z,1509702709.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:49.776Z,1509702709.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:51:49.777Z,1509702709.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:50.160Z,1509702710.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:50.174Z,1509702710.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:51:50.175Z,1509702710.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:50.566Z,1509702710.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:50.581Z,1509702710.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:51:50.582Z,1509702710.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:50.974Z,1509702710.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:51.002Z,1509702711.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:51:51.003Z,1509702711.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:51.373Z,1509702711.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:51.404Z,1509702711.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:51:51.405Z,1509702711.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:51.760Z,1509702711.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:51.775Z,1509702711.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T09:51:51.777Z,1509702711.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:52.160Z,1509702712.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:52.175Z,1509702712.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:51:52.177Z,1509702712.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:52.561Z,1509702712.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:52.575Z,1509702712.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T09:51:52.577Z,1509702712.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:52.960Z,1509702712.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:52.975Z,1509702712.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T09:51:52.976Z,1509702712.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:53.296Z,1509702713.296 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:51:53.390Z,1509702713.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:53.403Z,1509702713.403 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:51:53.405Z,1509702713.405 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:51:53.405Z,1509702713.405 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:51:53.406Z,1509702713.406 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:51:53.414Z,1509702713.414 [BPC1](ERROR): Failed to parse message.
2017-11-03T09:51:53.414Z,1509702713.414 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T09:51:53.414Z,1509702713.414 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:51:53.414Z,1509702713.414 [BPC1](ERROR): Data Fault
2017-11-03T09:51:53.469Z,1509702713.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T09:51:53.470Z,1509702713.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:53.573Z,1509702713.573 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:51:53.793Z,1509702713.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:53.808Z,1509702713.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T09:51:53.819Z,1509702713.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:57.038Z,1509702717.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:57.054Z,1509702717.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:57.200Z,1509702717.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:57.232Z,1509702717.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:57.321Z,1509702717.321 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:51:57.321Z,1509702717.321 [BPC1] No Fault, FailCount= 1
2017-11-03T09:51:57.656Z,1509702717.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:57.759Z,1509702717.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:57.868Z,1509702717.868 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T09:51:58.002Z,1509702718.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:58.035Z,1509702718.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:58.426Z,1509702718.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:58.486Z,1509702718.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:58.826Z,1509702718.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:58.841Z,1509702718.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:59.223Z,1509702719.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:59.243Z,1509702719.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:51:59.650Z,1509702719.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:51:59.686Z,1509702719.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:00.005Z,1509702720.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:00.032Z,1509702720.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:00.404Z,1509702720.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:00.458Z,1509702720.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:00.804Z,1509702720.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:00.836Z,1509702720.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:01.226Z,1509702721.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:01.241Z,1509702721.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:01.648Z,1509702721.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:01.685Z,1509702721.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:02.022Z,1509702722.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:02.043Z,1509702722.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:02.406Z,1509702722.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:02.433Z,1509702722.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:02.807Z,1509702722.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:02.833Z,1509702722.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:03.226Z,1509702723.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:03.241Z,1509702723.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:03.646Z,1509702723.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:03.675Z,1509702723.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:04.023Z,1509702724.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:04.045Z,1509702724.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:04.408Z,1509702724.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:04.424Z,1509702724.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:04.808Z,1509702724.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:04.824Z,1509702724.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:05.212Z,1509702725.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:05.246Z,1509702725.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:05.620Z,1509702725.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:05.709Z,1509702725.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:06.026Z,1509702726.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:06.049Z,1509702726.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:06.410Z,1509702726.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:06.425Z,1509702726.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:06.809Z,1509702726.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:06.827Z,1509702726.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:07.219Z,1509702727.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:07.247Z,1509702727.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:07.618Z,1509702727.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:07.648Z,1509702727.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:08.022Z,1509702728.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:08.044Z,1509702728.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:08.405Z,1509702728.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:08.451Z,1509702728.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:08.807Z,1509702728.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:08.813Z,1509702728.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x53976 got:0x7361
2017-11-03T09:52:08.825Z,1509702728.825 [BPC1](ERROR): Failed to parse message.
2017-11-03T09:52:08.825Z,1509702728.825 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T09:52:08.825Z,1509702728.825 [BPC1] Data Fault, FailCount= 2
2017-11-03T09:52:08.825Z,1509702728.825 [BPC1](ERROR): Data Fault
2017-11-03T09:52:08.863Z,1509702728.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:08.953Z,1509702728.953 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:52:09.225Z,1509702729.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:09.248Z,1509702729.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:09.617Z,1509702729.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:09.648Z,1509702729.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:10.020Z,1509702730.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:10.046Z,1509702730.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:10.143Z,1509702730.143 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:52:10.143Z,1509702730.143 [BPC1] No Fault, FailCount= 2
2017-11-03T09:52:10.407Z,1509702730.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:10.483Z,1509702730.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:10.809Z,1509702730.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:10.859Z,1509702730.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:11.222Z,1509702731.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:11.254Z,1509702731.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:11.616Z,1509702731.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:11.632Z,1509702731.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:12.016Z,1509702732.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:12.031Z,1509702732.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:12.411Z,1509702732.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:12.431Z,1509702732.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:12.809Z,1509702732.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:12.825Z,1509702732.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:13.217Z,1509702733.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:13.232Z,1509702733.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:13.663Z,1509702733.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:13.706Z,1509702733.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:14.014Z,1509702734.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:14.029Z,1509702734.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:14.410Z,1509702734.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:14.426Z,1509702734.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:14.803Z,1509702734.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:14.839Z,1509702734.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:15.214Z,1509702735.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:15.225Z,1509702735.225 [PNI_TCM](ERROR): CRC does not match. Expected:0x28558 got:0x7361
2017-11-03T09:52:15.248Z,1509702735.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:15.658Z,1509702735.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:15.679Z,1509702735.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:16.020Z,1509702736.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:16.035Z,1509702736.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:16.414Z,1509702736.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:16.430Z,1509702736.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:16.810Z,1509702736.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:16.835Z,1509702736.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:17.220Z,1509702737.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:17.243Z,1509702737.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:17.654Z,1509702737.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:17.679Z,1509702737.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:18.020Z,1509702738.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:18.045Z,1509702738.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:18.410Z,1509702738.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:18.441Z,1509702738.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:18.807Z,1509702738.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:18.822Z,1509702738.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:19.217Z,1509702739.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:19.240Z,1509702739.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:19.617Z,1509702739.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:19.687Z,1509702739.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:20.022Z,1509702740.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:20.050Z,1509702740.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:20.414Z,1509702740.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:20.430Z,1509702740.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:20.809Z,1509702740.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:20.825Z,1509702740.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:21.216Z,1509702741.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:21.251Z,1509702741.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:21.622Z,1509702741.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:21.654Z,1509702741.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:22.011Z,1509702742.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:22.055Z,1509702742.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:22.412Z,1509702742.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:22.427Z,1509702742.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:22.814Z,1509702742.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:22.863Z,1509702742.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:23.219Z,1509702743.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:23.235Z,1509702743.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:23.623Z,1509702743.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:23.707Z,1509702743.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:24.018Z,1509702744.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:24.067Z,1509702744.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:24.411Z,1509702744.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:24.428Z,1509702744.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:24.812Z,1509702744.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:24.827Z,1509702744.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:25.219Z,1509702745.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:25.239Z,1509702745.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:25.618Z,1509702745.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:25.633Z,1509702745.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:26.019Z,1509702746.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:26.039Z,1509702746.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:26.420Z,1509702746.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:26.439Z,1509702746.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:26.806Z,1509702746.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:26.828Z,1509702746.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:27.218Z,1509702747.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:27.239Z,1509702747.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:27.680Z,1509702747.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:27.718Z,1509702747.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:28.021Z,1509702748.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:28.050Z,1509702748.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:28.410Z,1509702748.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:28.432Z,1509702748.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:28.814Z,1509702748.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:28.829Z,1509702748.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:29.221Z,1509702749.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:29.237Z,1509702749.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:29.665Z,1509702749.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:29.711Z,1509702749.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:30.022Z,1509702750.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:30.043Z,1509702750.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:30.410Z,1509702750.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:30.426Z,1509702750.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:30.809Z,1509702750.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:30.832Z,1509702750.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:31.228Z,1509702751.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:31.244Z,1509702751.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:31.642Z,1509702751.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:31.693Z,1509702751.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:32.025Z,1509702752.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:32.042Z,1509702752.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:32.402Z,1509702752.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:32.443Z,1509702752.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:32.802Z,1509702752.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:32.811Z,1509702752.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x48097 got:0x6210
2017-11-03T09:52:32.843Z,1509702752.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:33.214Z,1509702753.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:33.252Z,1509702753.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:33.626Z,1509702753.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:33.680Z,1509702753.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:34.017Z,1509702754.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:34.042Z,1509702754.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:34.404Z,1509702754.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:34.437Z,1509702754.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:34.802Z,1509702754.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:34.886Z,1509702754.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:35.218Z,1509702755.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:35.241Z,1509702755.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:35.620Z,1509702755.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:35.667Z,1509702755.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:36.026Z,1509702756.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:36.050Z,1509702756.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:36.409Z,1509702756.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:36.455Z,1509702756.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:36.806Z,1509702756.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:36.862Z,1509702756.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:37.221Z,1509702757.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:37.252Z,1509702757.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:37.622Z,1509702757.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:37.652Z,1509702757.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:38.026Z,1509702758.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:38.054Z,1509702758.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:38.410Z,1509702758.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:38.425Z,1509702758.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:38.809Z,1509702758.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:38.828Z,1509702758.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:39.217Z,1509702759.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:39.232Z,1509702759.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:39.625Z,1509702759.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:39.655Z,1509702759.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:40.014Z,1509702760.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:40.029Z,1509702760.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:40.406Z,1509702760.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:40.426Z,1509702760.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:40.809Z,1509702760.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:40.833Z,1509702760.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:41.214Z,1509702761.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:41.235Z,1509702761.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:41.666Z,1509702761.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:41.714Z,1509702761.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:42.020Z,1509702762.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:42.058Z,1509702762.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:42.414Z,1509702762.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:42.429Z,1509702762.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:42.803Z,1509702762.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:42.835Z,1509702762.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:43.220Z,1509702763.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:43.235Z,1509702763.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:43.664Z,1509702763.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:43.691Z,1509702763.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:44.021Z,1509702764.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:44.036Z,1509702764.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:44.416Z,1509702764.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:44.431Z,1509702764.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:44.812Z,1509702764.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:44.827Z,1509702764.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:45.223Z,1509702765.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:45.243Z,1509702765.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:45.648Z,1509702765.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:45.684Z,1509702765.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:46.018Z,1509702766.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:46.041Z,1509702766.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:46.404Z,1509702766.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:46.420Z,1509702766.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:46.804Z,1509702766.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:46.846Z,1509702766.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:47.216Z,1509702767.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:47.223Z,1509702767.223 [PNI_TCM](ERROR): CRC does not match. Expected:0x51503 got:0x49596
2017-11-03T09:52:47.251Z,1509702767.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:47.636Z,1509702767.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:47.743Z,1509702767.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:48.018Z,1509702768.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:48.047Z,1509702768.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:48.405Z,1509702768.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:48.451Z,1509702768.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:48.807Z,1509702768.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:48.813Z,1509702768.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x24973 got:0x48391
2017-11-03T09:52:48.849Z,1509702768.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:49.218Z,1509702769.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:49.248Z,1509702769.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:49.617Z,1509702769.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:49.647Z,1509702769.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:50.023Z,1509702770.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:50.045Z,1509702770.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:50.410Z,1509702770.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:50.447Z,1509702770.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:50.804Z,1509702770.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:50.838Z,1509702770.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:51.217Z,1509702771.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:51.246Z,1509702771.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:51.620Z,1509702771.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:51.647Z,1509702771.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:52.019Z,1509702772.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:52.027Z,1509702772.027 [BPC1](ERROR): Failed to receive battery data
2017-11-03T09:52:52.027Z,1509702772.027 [BPC1] Communications Fault, FailCount= 1
2017-11-03T09:52:52.027Z,1509702772.027 [BPC1](ERROR): Communications Fault
2017-11-03T09:52:52.057Z,1509702772.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:52.151Z,1509702772.151 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T09:52:52.413Z,1509702772.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:52.441Z,1509702772.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:52.826Z,1509702772.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:52.851Z,1509702772.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:52.855Z,1509702772.855 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T09:52:52.855Z,1509702772.855 [Default:CheckIn:C.Wait] Stopped
2017-11-03T09:52:52.855Z,1509702772.855 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T09:52:52.855Z,1509702772.855 [Default:CheckIn:D] Running Loop=1
2017-11-03T09:52:53.220Z,1509702773.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:53.246Z,1509702773.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:53.250Z,1509702773.250 [Default:CheckIn:D] Stopped
2017-11-03T09:52:53.250Z,1509702773.250 [Default:CheckIn:E] Running Loop=1
2017-11-03T09:52:53.337Z,1509702773.337 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:52:53.337Z,1509702773.337 [BPC1] No Fault, FailCount= 1
2017-11-03T09:52:53.619Z,1509702773.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:53.698Z,1509702773.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:53.702Z,1509702773.702 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 577.761393 min 
2017-11-03T09:52:53.702Z,1509702773.702 [Default:CheckIn:E] Stopped
2017-11-03T09:52:53.702Z,1509702773.702 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T09:52:53.702Z,1509702773.702 [Default:CheckIn] Stopped
2017-11-03T09:52:53.702Z,1509702773.702 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T09:52:53.703Z,1509702773.703 [Default:CheckIn](INFO): Running loop #57
2017-11-03T09:52:53.703Z,1509702773.703 [Default:CheckIn] Running Loop=57
2017-11-03T09:52:53.703Z,1509702773.703 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T09:52:53.703Z,1509702773.703 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T09:52:54.014Z,1509702774.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:54.029Z,1509702774.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:57.202Z,1509702777.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:57.262Z,1509702777.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:57.400Z,1509702777.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:57.435Z,1509702777.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:57.814Z,1509702777.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:57.831Z,1509702777.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:58.210Z,1509702778.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:58.231Z,1509702778.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:58.610Z,1509702778.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:58.625Z,1509702778.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:58.997Z,1509702778.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:59.013Z,1509702779.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:59.399Z,1509702779.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:59.419Z,1509702779.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:52:59.793Z,1509702779.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:52:59.814Z,1509702779.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:00.209Z,1509702780.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:00.227Z,1509702780.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:00.604Z,1509702780.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:00.627Z,1509702780.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:01.005Z,1509702781.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:01.020Z,1509702781.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:01.398Z,1509702781.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:01.413Z,1509702781.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:01.793Z,1509702781.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:01.814Z,1509702781.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:02.208Z,1509702782.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:02.224Z,1509702782.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:02.609Z,1509702782.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:02.631Z,1509702782.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:03.008Z,1509702783.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:03.023Z,1509702783.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:03.399Z,1509702783.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:03.414Z,1509702783.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:03.800Z,1509702783.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:03.816Z,1509702783.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:04.210Z,1509702784.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:04.239Z,1509702784.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:04.605Z,1509702784.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:04.635Z,1509702784.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:05.005Z,1509702785.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:05.037Z,1509702785.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:05.396Z,1509702785.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:05.411Z,1509702785.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:05.788Z,1509702785.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:05.803Z,1509702785.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:06.241Z,1509702786.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:06.256Z,1509702786.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:06.602Z,1509702786.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:06.635Z,1509702786.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:07.006Z,1509702787.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:07.037Z,1509702787.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:07.398Z,1509702787.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:07.413Z,1509702787.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:07.796Z,1509702787.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:07.854Z,1509702787.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:08.243Z,1509702788.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:08.258Z,1509702788.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:08.601Z,1509702788.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:08.618Z,1509702788.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:09.002Z,1509702789.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:09.017Z,1509702789.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:09.396Z,1509702789.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:09.455Z,1509702789.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:09.795Z,1509702789.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:09.818Z,1509702789.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:10.205Z,1509702790.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:10.259Z,1509702790.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:10.601Z,1509702790.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:10.617Z,1509702790.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:11.005Z,1509702791.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:11.051Z,1509702791.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:11.397Z,1509702791.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:11.447Z,1509702791.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:11.794Z,1509702791.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:11.812Z,1509702791.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:12.201Z,1509702792.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:12.217Z,1509702792.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:12.601Z,1509702792.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:12.617Z,1509702792.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:13.001Z,1509702793.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:13.019Z,1509702793.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:13.398Z,1509702793.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:13.413Z,1509702793.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:13.798Z,1509702793.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:13.813Z,1509702793.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:14.201Z,1509702794.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:14.217Z,1509702794.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:14.605Z,1509702794.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:14.621Z,1509702794.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:15.002Z,1509702795.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:15.017Z,1509702795.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:15.398Z,1509702795.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:15.413Z,1509702795.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:15.795Z,1509702795.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:15.811Z,1509702795.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:16.200Z,1509702796.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:16.219Z,1509702796.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:16.605Z,1509702796.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:16.620Z,1509702796.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:17.002Z,1509702797.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:17.017Z,1509702797.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:17.398Z,1509702797.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:17.419Z,1509702797.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:17.796Z,1509702797.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:17.811Z,1509702797.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:18.205Z,1509702798.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:18.233Z,1509702798.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:18.612Z,1509702798.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:18.635Z,1509702798.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:19.008Z,1509702799.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:19.030Z,1509702799.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:19.399Z,1509702799.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:19.415Z,1509702799.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:19.799Z,1509702799.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:19.819Z,1509702799.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:20.230Z,1509702800.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:20.262Z,1509702800.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:20.614Z,1509702800.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:20.629Z,1509702800.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:21.009Z,1509702801.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:21.031Z,1509702801.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:21.401Z,1509702801.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:21.416Z,1509702801.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:21.803Z,1509702801.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:21.819Z,1509702801.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:22.226Z,1509702802.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:22.307Z,1509702802.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:22.611Z,1509702802.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:22.658Z,1509702802.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:23.007Z,1509702803.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:23.022Z,1509702803.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:23.402Z,1509702803.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:23.419Z,1509702803.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:23.792Z,1509702803.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:23.867Z,1509702803.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:24.211Z,1509702804.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:24.235Z,1509702804.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:24.606Z,1509702804.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:24.666Z,1509702804.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:25.011Z,1509702805.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:25.026Z,1509702805.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:25.403Z,1509702805.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:25.458Z,1509702805.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:25.787Z,1509702805.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:25.843Z,1509702805.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:26.211Z,1509702806.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:26.230Z,1509702806.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:26.615Z,1509702806.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:26.630Z,1509702806.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:27.009Z,1509702807.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:27.031Z,1509702807.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:27.389Z,1509702807.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:27.418Z,1509702807.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:27.808Z,1509702807.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:27.825Z,1509702807.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:28.205Z,1509702808.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:28.221Z,1509702808.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:28.609Z,1509702808.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:28.624Z,1509702808.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:29.013Z,1509702809.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:29.035Z,1509702809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:29.392Z,1509702809.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:29.417Z,1509702809.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:29.787Z,1509702809.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:29.818Z,1509702809.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:30.214Z,1509702810.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:30.229Z,1509702810.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:30.613Z,1509702810.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:30.678Z,1509702810.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:31.008Z,1509702811.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:31.024Z,1509702811.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:31.391Z,1509702811.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:31.417Z,1509702811.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:31.788Z,1509702811.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:31.818Z,1509702811.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:32.209Z,1509702812.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:32.239Z,1509702812.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:32.605Z,1509702812.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:32.637Z,1509702812.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:33.005Z,1509702813.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:33.036Z,1509702813.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:33.393Z,1509702813.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:33.409Z,1509702813.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:33.795Z,1509702813.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:33.810Z,1509702813.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:34.234Z,1509702814.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:34.258Z,1509702814.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:34.610Z,1509702814.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:34.634Z,1509702814.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:35.005Z,1509702815.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:35.037Z,1509702815.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:35.389Z,1509702815.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:35.405Z,1509702815.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:35.792Z,1509702815.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:35.807Z,1509702815.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:36.242Z,1509702816.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:36.266Z,1509702816.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:36.602Z,1509702816.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:36.618Z,1509702816.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:37.002Z,1509702817.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:37.017Z,1509702817.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:37.400Z,1509702817.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:37.416Z,1509702817.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:37.795Z,1509702817.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:37.858Z,1509702817.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:38.204Z,1509702818.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:38.221Z,1509702818.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:38.604Z,1509702818.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:38.650Z,1509702818.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:39.004Z,1509702819.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:39.020Z,1509702819.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:39.399Z,1509702819.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:39.443Z,1509702819.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:39.787Z,1509702819.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:39.858Z,1509702819.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:40.203Z,1509702820.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:40.224Z,1509702820.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:40.613Z,1509702820.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:40.628Z,1509702820.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:41.005Z,1509702821.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:41.026Z,1509702821.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:41.392Z,1509702821.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:41.418Z,1509702821.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:41.806Z,1509702821.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:41.827Z,1509702821.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:42.214Z,1509702822.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:42.229Z,1509702822.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:42.609Z,1509702822.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:42.625Z,1509702822.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:43.007Z,1509702823.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:43.026Z,1509702823.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:43.390Z,1509702823.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:43.416Z,1509702823.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:43.787Z,1509702823.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:43.813Z,1509702823.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:44.206Z,1509702824.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:44.221Z,1509702824.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:44.606Z,1509702824.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:44.621Z,1509702824.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:45.009Z,1509702825.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:45.031Z,1509702825.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:45.389Z,1509702825.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:45.414Z,1509702825.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:45.792Z,1509702825.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:45.818Z,1509702825.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:46.221Z,1509702826.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:46.237Z,1509702826.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:46.609Z,1509702826.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:46.630Z,1509702826.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:47.014Z,1509702827.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:47.035Z,1509702827.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:47.390Z,1509702827.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:47.425Z,1509702827.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:47.788Z,1509702827.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:47.804Z,1509702827.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:48.238Z,1509702828.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:48.253Z,1509702828.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:48.602Z,1509702828.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:48.629Z,1509702828.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:49.002Z,1509702829.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:49.027Z,1509702829.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:49.390Z,1509702829.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:49.406Z,1509702829.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:49.785Z,1509702829.785 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:53:49.785Z,1509702829.785 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T09:53:49.785Z,1509702829.785 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:53:49.790Z,1509702829.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:49.838Z,1509702829.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:53:49.839Z,1509702829.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:49.929Z,1509702829.929 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:53:50.189Z,1509702830.189 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:53:50.230Z,1509702830.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:50.333Z,1509702830.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T09:53:50.335Z,1509702830.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:50.394Z,1509702830.394 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:53:50.604Z,1509702830.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:50.638Z,1509702830.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:53:50.639Z,1509702830.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:51.006Z,1509702831.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:51.036Z,1509702831.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:53:51.037Z,1509702831.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:51.393Z,1509702831.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:51.408Z,1509702831.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:53:51.409Z,1509702831.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:51.795Z,1509702831.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:51.859Z,1509702831.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-03T09:53:51.860Z,1509702831.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:51.953Z,1509702831.953 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:53:51.953Z,1509702831.953 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T09:53:52.008Z,1509702832.008 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:53:52.009Z,1509702832.009 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:53:52.009Z,1509702832.009 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:53:52.009Z,1509702832.009 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:53:52.205Z,1509702832.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:52.259Z,1509702832.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-03T09:53:52.261Z,1509702832.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:52.605Z,1509702832.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:52.636Z,1509702832.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T09:53:52.637Z,1509702832.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:53.009Z,1509702833.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:53.034Z,1509702833.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T09:53:53.035Z,1509702833.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:53.393Z,1509702833.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:53.445Z,1509702833.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T09:53:53.447Z,1509702833.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:53.793Z,1509702833.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:53.808Z,1509702833.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T09:53:53.809Z,1509702833.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:54.202Z,1509702834.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:54.246Z,1509702834.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T09:53:54.248Z,1509702834.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:56.162Z,1509702836.162 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:53:56.243Z,1509702836.243 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:53:56.244Z,1509702836.244 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:53:56.245Z,1509702836.245 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:53:56.245Z,1509702836.245 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:53:57.607Z,1509702837.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:57.675Z,1509702837.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:57.838Z,1509702837.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:57.877Z,1509702837.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:58.211Z,1509702838.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:58.239Z,1509702838.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:58.628Z,1509702838.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:58.651Z,1509702838.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:59.012Z,1509702839.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:59.039Z,1509702839.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:59.434Z,1509702839.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:59.450Z,1509702839.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:53:59.837Z,1509702839.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:53:59.853Z,1509702839.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:00.233Z,1509702840.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:00.248Z,1509702840.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:00.625Z,1509702840.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:00.645Z,1509702840.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:01.009Z,1509702841.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:01.037Z,1509702841.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:01.415Z,1509702841.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:01.440Z,1509702841.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:01.815Z,1509702841.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:01.843Z,1509702841.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:02.226Z,1509702842.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:02.249Z,1509702842.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:02.633Z,1509702842.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:02.653Z,1509702842.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:03.034Z,1509702843.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:03.055Z,1509702843.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:03.424Z,1509702843.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:03.451Z,1509702843.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:03.813Z,1509702843.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:03.849Z,1509702843.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:04.221Z,1509702844.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:04.252Z,1509702844.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:04.621Z,1509702844.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:04.648Z,1509702844.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:05.036Z,1509702845.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:05.051Z,1509702845.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:05.415Z,1509702845.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:05.451Z,1509702845.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:05.812Z,1509702845.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:05.855Z,1509702845.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:06.230Z,1509702846.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:06.257Z,1509702846.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:06.631Z,1509702846.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:06.657Z,1509702846.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:07.031Z,1509702847.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:07.058Z,1509702847.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:07.416Z,1509702847.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:07.435Z,1509702847.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:07.819Z,1509702847.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:07.863Z,1509702847.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:08.226Z,1509702848.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:08.243Z,1509702848.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:08.625Z,1509702848.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:08.647Z,1509702848.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:09.021Z,1509702849.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:09.036Z,1509702849.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:09.420Z,1509702849.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:09.436Z,1509702849.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:09.818Z,1509702849.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:09.910Z,1509702849.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:10.226Z,1509702850.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:10.241Z,1509702850.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:10.624Z,1509702850.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:10.679Z,1509702850.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:11.025Z,1509702851.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:11.046Z,1509702851.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:11.424Z,1509702851.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:11.468Z,1509702851.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:11.819Z,1509702851.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:11.879Z,1509702851.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:12.228Z,1509702852.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:12.244Z,1509702852.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:12.626Z,1509702852.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:12.640Z,1509702852.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:13.026Z,1509702853.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:13.041Z,1509702853.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:13.419Z,1509702853.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:13.434Z,1509702853.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:13.820Z,1509702853.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:13.843Z,1509702853.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:14.228Z,1509702854.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:14.244Z,1509702854.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:14.630Z,1509702854.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:14.651Z,1509702854.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:15.029Z,1509702855.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:15.044Z,1509702855.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:15.421Z,1509702855.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:15.436Z,1509702855.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:15.823Z,1509702855.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:15.899Z,1509702855.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:16.229Z,1509702856.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:16.245Z,1509702856.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:16.627Z,1509702856.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:16.647Z,1509702856.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:17.027Z,1509702857.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:17.046Z,1509702857.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:17.424Z,1509702857.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:17.439Z,1509702857.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:17.817Z,1509702857.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:17.832Z,1509702857.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:18.246Z,1509702858.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:18.270Z,1509702858.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:18.634Z,1509702858.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:18.650Z,1509702858.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:19.032Z,1509702859.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:19.048Z,1509702859.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:19.425Z,1509702859.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:19.440Z,1509702859.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:19.824Z,1509702859.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:19.839Z,1509702859.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:20.254Z,1509702860.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:20.287Z,1509702860.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:20.287Z,1509702860.287 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 193
2017-11-03T09:54:20.287Z,1509702860.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:54:20.289Z,1509702860.289 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:20.289Z,1509702860.289 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 193
2017-11-03T09:54:20.289Z,1509702860.289 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:54:20.291Z,1509702860.291 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:20.291Z,1509702860.291 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 193
2017-11-03T09:54:20.291Z,1509702860.291 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:54:20.373Z,1509702860.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:54:20.374Z,1509702860.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:54:20.374Z,1509702860.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:54:20.640Z,1509702860.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:20.732Z,1509702860.732 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:54:20.733Z,1509702860.733 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 193
2017-11-03T09:54:20.733Z,1509702860.733 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:54:20.733Z,1509702860.733 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 193
2017-11-03T09:54:20.734Z,1509702860.734 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:54:20.734Z,1509702860.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 193
2017-11-03T09:54:21.031Z,1509702861.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:21.067Z,1509702861.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:54:21.067Z,1509702861.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:54:21.068Z,1509702861.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:54:21.068Z,1509702861.068 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:54:21.069Z,1509702861.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:54:21.069Z,1509702861.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:54:21.069Z,1509702861.069 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:54:21.070Z,1509702861.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:54:21.070Z,1509702861.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:54:21.413Z,1509702861.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:21.429Z,1509702861.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:21.827Z,1509702861.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:21.855Z,1509702861.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:22.230Z,1509702862.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:22.254Z,1509702862.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:22.630Z,1509702862.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:22.659Z,1509702862.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:23.025Z,1509702863.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:23.053Z,1509702863.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:23.412Z,1509702863.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:23.427Z,1509702863.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:23.827Z,1509702863.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:23.879Z,1509702863.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:24.230Z,1509702864.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:24.284Z,1509702864.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:24.629Z,1509702864.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:24.661Z,1509702864.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:25.029Z,1509702865.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:25.060Z,1509702865.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:25.416Z,1509702865.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:25.460Z,1509702865.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:25.827Z,1509702865.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:25.862Z,1509702865.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:26.226Z,1509702866.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:26.279Z,1509702866.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:26.629Z,1509702866.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:26.660Z,1509702866.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:27.021Z,1509702867.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:27.060Z,1509702867.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:27.420Z,1509702867.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:27.435Z,1509702867.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:27.823Z,1509702867.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:27.859Z,1509702867.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:28.229Z,1509702868.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:28.261Z,1509702868.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:28.634Z,1509702868.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:28.655Z,1509702868.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:29.029Z,1509702869.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:29.059Z,1509702869.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:29.416Z,1509702869.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:29.431Z,1509702869.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:29.816Z,1509702869.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:29.897Z,1509702869.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:30.226Z,1509702870.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:30.241Z,1509702870.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:30.625Z,1509702870.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:30.640Z,1509702870.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:31.026Z,1509702871.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:31.041Z,1509702871.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:31.421Z,1509702871.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:31.437Z,1509702871.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:31.821Z,1509702871.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:31.843Z,1509702871.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:32.242Z,1509702872.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:32.273Z,1509702872.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:32.626Z,1509702872.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:32.641Z,1509702872.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:33.030Z,1509702873.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:33.045Z,1509702873.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:33.422Z,1509702873.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:33.437Z,1509702873.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:33.820Z,1509702873.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:33.836Z,1509702873.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:34.236Z,1509702874.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:34.255Z,1509702874.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:34.629Z,1509702874.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:34.651Z,1509702874.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:35.028Z,1509702875.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:35.043Z,1509702875.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:35.423Z,1509702875.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:35.439Z,1509702875.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:35.818Z,1509702875.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:35.834Z,1509702875.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:36.227Z,1509702876.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:36.246Z,1509702876.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:36.629Z,1509702876.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:36.644Z,1509702876.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:37.028Z,1509702877.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:37.043Z,1509702877.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:37.421Z,1509702877.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:37.437Z,1509702877.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:37.820Z,1509702877.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:37.835Z,1509702877.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:38.230Z,1509702878.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:38.245Z,1509702878.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:38.628Z,1509702878.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:38.694Z,1509702878.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:39.030Z,1509702879.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:39.091Z,1509702879.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:39.425Z,1509702879.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:39.440Z,1509702879.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:39.819Z,1509702879.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:39.879Z,1509702879.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:40.235Z,1509702880.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:40.255Z,1509702880.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:40.633Z,1509702880.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:40.675Z,1509702880.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:41.033Z,1509702881.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:41.082Z,1509702881.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:41.427Z,1509702881.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:41.442Z,1509702881.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:41.828Z,1509702881.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:41.851Z,1509702881.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:42.233Z,1509702882.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:42.255Z,1509702882.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:42.634Z,1509702882.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:42.650Z,1509702882.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:43.033Z,1509702883.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:43.055Z,1509702883.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:43.426Z,1509702883.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:43.441Z,1509702883.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:43.823Z,1509702883.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:43.898Z,1509702883.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:44.230Z,1509702884.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:44.251Z,1509702884.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:44.637Z,1509702884.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:44.652Z,1509702884.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:45.028Z,1509702885.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:45.057Z,1509702885.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:45.424Z,1509702885.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:45.440Z,1509702885.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:45.822Z,1509702885.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:45.843Z,1509702885.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:46.242Z,1509702886.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:46.258Z,1509702886.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:46.636Z,1509702886.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:46.652Z,1509702886.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:47.033Z,1509702887.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:47.049Z,1509702887.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:47.422Z,1509702887.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:47.443Z,1509702887.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:47.809Z,1509702887.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:47.843Z,1509702887.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:48.231Z,1509702888.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:48.251Z,1509702888.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:48.634Z,1509702888.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:48.650Z,1509702888.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:49.033Z,1509702889.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:49.048Z,1509702889.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:49.422Z,1509702889.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:49.438Z,1509702889.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:49.828Z,1509702889.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:49.843Z,1509702889.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:50.234Z,1509702890.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:50.249Z,1509702890.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:50.633Z,1509702890.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:50.649Z,1509702890.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:51.034Z,1509702891.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:51.049Z,1509702891.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:51.425Z,1509702891.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:51.440Z,1509702891.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:51.831Z,1509702891.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:51.851Z,1509702891.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:52.234Z,1509702892.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:52.249Z,1509702892.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:52.636Z,1509702892.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:52.652Z,1509702892.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:53.033Z,1509702893.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:53.107Z,1509702893.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:53.422Z,1509702893.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:53.438Z,1509702893.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:53.812Z,1509702893.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:53.877Z,1509702893.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:54.235Z,1509702894.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:54.255Z,1509702894.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:57.542Z,1509702897.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:57.587Z,1509702897.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:57.736Z,1509702897.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:57.751Z,1509702897.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:58.107Z,1509702898.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:58.178Z,1509702898.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:58.508Z,1509702898.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:58.535Z,1509702898.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:58.908Z,1509702898.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:58.935Z,1509702898.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:59.330Z,1509702899.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:59.346Z,1509702899.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:54:59.734Z,1509702899.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:54:59.755Z,1509702899.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:00.163Z,1509702900.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:00.231Z,1509702900.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:00.508Z,1509702900.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:00.544Z,1509702900.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:00.909Z,1509702900.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:00.945Z,1509702900.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:01.308Z,1509702901.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:01.340Z,1509702901.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:01.712Z,1509702901.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:01.727Z,1509702901.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:02.107Z,1509702902.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:02.185Z,1509702902.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:02.524Z,1509702902.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:02.539Z,1509702902.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:02.926Z,1509702902.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:02.941Z,1509702902.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:03.325Z,1509702903.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:03.347Z,1509702903.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:03.724Z,1509702903.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:03.739Z,1509702903.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:04.116Z,1509702904.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:04.132Z,1509702904.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:04.521Z,1509702904.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:04.536Z,1509702904.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:04.917Z,1509702904.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:04.933Z,1509702904.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:05.326Z,1509702905.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:05.341Z,1509702905.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:05.741Z,1509702905.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:05.765Z,1509702905.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:06.125Z,1509702906.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:06.141Z,1509702906.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:06.517Z,1509702906.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:06.533Z,1509702906.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:06.922Z,1509702906.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:06.937Z,1509702906.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:07.318Z,1509702907.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:07.333Z,1509702907.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:07.731Z,1509702907.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:07.747Z,1509702907.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:08.119Z,1509702908.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:08.139Z,1509702908.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:08.526Z,1509702908.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:08.542Z,1509702908.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:08.960Z,1509702908.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:08.983Z,1509702908.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:09.325Z,1509702909.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:09.347Z,1509702909.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:09.762Z,1509702909.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:09.777Z,1509702909.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:10.118Z,1509702910.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:10.182Z,1509702910.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:10.517Z,1509702910.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:10.582Z,1509702910.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:10.921Z,1509702910.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:10.943Z,1509702910.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:11.332Z,1509702911.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:11.379Z,1509702911.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:11.737Z,1509702911.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:11.774Z,1509702911.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:12.127Z,1509702912.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:12.179Z,1509702912.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:12.517Z,1509702912.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:12.574Z,1509702912.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:12.919Z,1509702912.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:12.943Z,1509702912.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:13.319Z,1509702913.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:13.343Z,1509702913.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:13.718Z,1509702913.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:13.734Z,1509702913.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:14.104Z,1509702914.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:14.191Z,1509702914.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:14.522Z,1509702914.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:14.555Z,1509702914.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:14.930Z,1509702914.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:14.949Z,1509702914.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:15.326Z,1509702915.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:15.350Z,1509702915.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:15.708Z,1509702915.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:15.724Z,1509702915.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:16.115Z,1509702916.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:16.203Z,1509702916.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:16.516Z,1509702916.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:16.551Z,1509702916.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:16.908Z,1509702916.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:16.947Z,1509702916.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:17.326Z,1509702917.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:17.350Z,1509702917.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:17.730Z,1509702917.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:17.758Z,1509702917.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:18.122Z,1509702918.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:18.152Z,1509702918.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:18.508Z,1509702918.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:18.524Z,1509702918.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:18.915Z,1509702918.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:18.931Z,1509702918.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:19.308Z,1509702919.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:19.323Z,1509702919.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:19.728Z,1509702919.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:19.753Z,1509702919.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:20.112Z,1509702920.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:20.128Z,1509702920.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:20.491Z,1509702920.491 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T09:55:20.491Z,1509702920.491 [NAL9602] Data Fault, FailCount= 3
2017-11-03T09:55:20.491Z,1509702920.491 [NAL9602](ERROR): Data Fault
2017-11-03T09:55:20.509Z,1509702920.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:20.525Z,1509702920.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:20.621Z,1509702920.621 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T09:55:20.894Z,1509702920.894 [NAL9602](INFO): Powering down
2017-11-03T09:55:20.911Z,1509702920.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:20.935Z,1509702920.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:21.311Z,1509702921.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:21.327Z,1509702921.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:21.719Z,1509702921.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:21.759Z,1509702921.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:21.847Z,1509702921.847 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T09:55:21.847Z,1509702921.847 [NAL9602] No Fault, FailCount= 3
2017-11-03T09:55:22.116Z,1509702922.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:22.133Z,1509702922.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:22.515Z,1509702922.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:22.531Z,1509702922.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:22.916Z,1509702922.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:22.932Z,1509702922.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:23.315Z,1509702923.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:23.331Z,1509702923.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:23.757Z,1509702923.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:23.773Z,1509702923.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:24.115Z,1509702924.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:24.132Z,1509702924.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:24.515Z,1509702924.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:24.574Z,1509702924.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:24.916Z,1509702924.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:24.987Z,1509702924.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:25.319Z,1509702925.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:25.335Z,1509702925.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:25.719Z,1509702925.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:25.767Z,1509702925.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:26.114Z,1509702926.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:26.129Z,1509702926.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:26.518Z,1509702926.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:26.567Z,1509702926.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:26.915Z,1509702926.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:26.966Z,1509702926.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:27.318Z,1509702927.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:27.333Z,1509702927.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:27.718Z,1509702927.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:27.734Z,1509702927.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:28.116Z,1509702928.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:28.221Z,1509702928.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:28.518Z,1509702928.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:28.533Z,1509702928.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:28.916Z,1509702928.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:28.932Z,1509702928.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:29.316Z,1509702929.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:29.331Z,1509702929.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:29.718Z,1509702929.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:29.733Z,1509702929.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:30.161Z,1509702930.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:30.231Z,1509702930.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:30.516Z,1509702930.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:30.532Z,1509702930.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:30.918Z,1509702930.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:30.939Z,1509702930.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:31.318Z,1509702931.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:31.334Z,1509702931.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:31.714Z,1509702931.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:31.734Z,1509702931.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:32.118Z,1509702932.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:32.139Z,1509702932.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:32.518Z,1509702932.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:32.534Z,1509702932.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:32.919Z,1509702932.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:32.939Z,1509702932.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:33.318Z,1509702933.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:33.333Z,1509702933.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:33.731Z,1509702933.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:33.747Z,1509702933.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:34.116Z,1509702934.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:34.133Z,1509702934.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:34.518Z,1509702934.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:34.533Z,1509702934.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:34.920Z,1509702934.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:34.943Z,1509702934.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:35.316Z,1509702935.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:35.333Z,1509702935.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:35.731Z,1509702935.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:35.750Z,1509702935.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:36.119Z,1509702936.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:36.134Z,1509702936.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:36.519Z,1509702936.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:36.534Z,1509702936.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:36.919Z,1509702936.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:36.934Z,1509702936.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:37.318Z,1509702937.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:37.339Z,1509702937.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:37.739Z,1509702937.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:37.786Z,1509702937.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:38.116Z,1509702938.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:38.132Z,1509702938.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:38.518Z,1509702938.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:38.534Z,1509702938.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:38.918Z,1509702938.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:38.987Z,1509702938.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:39.308Z,1509702939.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:39.335Z,1509702939.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:39.710Z,1509702939.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:39.775Z,1509702939.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:40.106Z,1509702940.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:40.139Z,1509702940.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:40.508Z,1509702940.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:40.567Z,1509702940.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:40.910Z,1509702940.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:40.942Z,1509702940.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:41.308Z,1509702941.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:41.359Z,1509702941.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:41.704Z,1509702941.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:41.719Z,1509702941.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:42.108Z,1509702942.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:42.172Z,1509702942.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:42.515Z,1509702942.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:42.531Z,1509702942.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:42.914Z,1509702942.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:42.929Z,1509702942.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:43.315Z,1509702943.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:43.331Z,1509702943.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:43.716Z,1509702943.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:43.732Z,1509702943.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:44.115Z,1509702944.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:44.209Z,1509702944.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:44.516Z,1509702944.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:44.532Z,1509702944.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:44.916Z,1509702944.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:44.932Z,1509702944.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:45.315Z,1509702945.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:45.330Z,1509702945.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:45.721Z,1509702945.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:45.737Z,1509702945.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:46.117Z,1509702946.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:46.133Z,1509702946.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:46.517Z,1509702946.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:46.532Z,1509702946.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:46.918Z,1509702946.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:46.933Z,1509702946.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:47.317Z,1509702947.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:47.332Z,1509702947.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:47.725Z,1509702947.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:47.740Z,1509702947.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:48.118Z,1509702948.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:48.133Z,1509702948.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:48.516Z,1509702948.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:48.533Z,1509702948.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:48.916Z,1509702948.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:48.933Z,1509702948.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:49.315Z,1509702949.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:49.333Z,1509702949.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:49.731Z,1509702949.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:49.786Z,1509702949.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:50.115Z,1509702950.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:50.132Z,1509702950.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:50.515Z,1509702950.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:50.531Z,1509702950.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:50.898Z,1509702950.898 [NAL9602](INFO): Powering up NAL9602
2017-11-03T09:55:50.916Z,1509702950.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:50.931Z,1509702950.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:51.316Z,1509702951.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:51.332Z,1509702951.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:51.737Z,1509702951.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:51.766Z,1509702951.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:52.118Z,1509702952.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:52.134Z,1509702952.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:52.516Z,1509702952.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:52.532Z,1509702952.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:52.572Z,1509702952.572 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:55:52.573Z,1509702952.573 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T09:55:52.573Z,1509702952.573 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:55:52.624Z,1509702952.624 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:55:52.918Z,1509702952.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:52.933Z,1509702952.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:55:52.934Z,1509702952.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:52.977Z,1509702952.977 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:55:53.106Z,1509702953.106 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:55:53.315Z,1509702953.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:53.386Z,1509702953.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T09:55:53.387Z,1509702953.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:53.720Z,1509702953.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:53.736Z,1509702953.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:55:53.737Z,1509702953.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:54.119Z,1509702954.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:54.175Z,1509702954.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T09:55:54.176Z,1509702954.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:54.523Z,1509702954.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:54.538Z,1509702954.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T09:55:54.539Z,1509702954.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:54.636Z,1509702954.636 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:55:54.637Z,1509702954.637 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T09:55:54.724Z,1509702954.724 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:55:54.725Z,1509702954.725 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:55:54.725Z,1509702954.725 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:55:54.725Z,1509702954.725 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:55:58.053Z,1509702958.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:58.104Z,1509702958.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T09:55:58.105Z,1509702958.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:58.258Z,1509702958.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:58.330Z,1509702958.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T09:55:58.331Z,1509702958.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:58.657Z,1509702958.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:58.695Z,1509702958.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T09:55:58.696Z,1509702958.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:58.978Z,1509702958.978 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:55:59.082Z,1509702959.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:59.132Z,1509702959.132 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:55:59.133Z,1509702959.133 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:55:59.133Z,1509702959.133 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:55:59.134Z,1509702959.134 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:55:59.146Z,1509702959.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T09:55:59.147Z,1509702959.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:59.459Z,1509702959.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:59.491Z,1509702959.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T09:55:59.500Z,1509702959.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:55:59.858Z,1509702959.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:55:59.891Z,1509702959.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:00.263Z,1509702960.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:00.310Z,1509702960.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:00.663Z,1509702960.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:00.687Z,1509702960.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:01.083Z,1509702961.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:01.131Z,1509702961.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:01.475Z,1509702961.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:01.526Z,1509702961.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:01.838Z,1509702961.838 [NAL9602](INFO): NAL9602 initialized
2017-11-03T09:56:01.870Z,1509702961.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:01.885Z,1509702961.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:02.262Z,1509702962.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:02.287Z,1509702962.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:02.674Z,1509702962.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:02.725Z,1509702962.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:03.087Z,1509702963.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:03.143Z,1509702963.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:03.477Z,1509702963.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:03.499Z,1509702963.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:03.857Z,1509702963.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:03.905Z,1509702963.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:04.278Z,1509702964.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:04.307Z,1509702964.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:04.681Z,1509702964.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:04.714Z,1509702964.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:05.057Z,1509702965.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:05.114Z,1509702965.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:05.468Z,1509702965.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:05.507Z,1509702965.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:05.906Z,1509702965.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:05.959Z,1509702965.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:06.287Z,1509702966.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:06.311Z,1509702966.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:06.684Z,1509702966.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:06.703Z,1509702966.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:07.057Z,1509702967.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:07.109Z,1509702967.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:07.475Z,1509702967.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:07.544Z,1509702967.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:07.879Z,1509702967.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:07.911Z,1509702967.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:08.283Z,1509702968.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:08.320Z,1509702968.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:08.670Z,1509702968.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:08.716Z,1509702968.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:09.062Z,1509702969.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:09.077Z,1509702969.077 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T09:56:09.078Z,1509702969.078 [BPC1] Data Fault, FailCount= 1
2017-11-03T09:56:09.078Z,1509702969.078 [BPC1](ERROR): Data Fault
2017-11-03T09:56:09.122Z,1509702969.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:09.225Z,1509702969.225 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T09:56:09.470Z,1509702969.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:09.487Z,1509702969.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:09.871Z,1509702969.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:09.935Z,1509702969.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:10.266Z,1509702970.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:10.315Z,1509702970.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:10.410Z,1509702970.410 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T09:56:10.410Z,1509702970.410 [BPC1] No Fault, FailCount= 1
2017-11-03T09:56:10.685Z,1509702970.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:10.799Z,1509702970.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:11.066Z,1509702971.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:11.098Z,1509702971.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:11.475Z,1509702971.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:11.539Z,1509702971.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:11.880Z,1509702971.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:11.919Z,1509702971.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:12.272Z,1509702972.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:12.311Z,1509702972.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:12.656Z,1509702972.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:12.699Z,1509702972.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:13.065Z,1509702973.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:13.109Z,1509702973.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:13.475Z,1509702973.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:13.520Z,1509702973.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:13.875Z,1509702973.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:13.894Z,1509702973.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:14.274Z,1509702974.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:14.295Z,1509702974.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:14.657Z,1509702974.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:14.700Z,1509702974.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:15.059Z,1509702975.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:15.106Z,1509702975.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:15.475Z,1509702975.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:15.503Z,1509702975.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:15.879Z,1509702975.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:15.911Z,1509702975.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:16.280Z,1509702976.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:16.357Z,1509702976.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:16.658Z,1509702976.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:16.695Z,1509702976.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:17.056Z,1509702977.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:17.111Z,1509702977.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:17.477Z,1509702977.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:17.492Z,1509702977.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:17.885Z,1509702977.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:17.900Z,1509702977.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:18.281Z,1509702978.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:18.296Z,1509702978.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:18.660Z,1509702978.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:18.691Z,1509702978.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:19.059Z,1509702979.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:19.093Z,1509702979.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:19.481Z,1509702979.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:19.496Z,1509702979.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:19.924Z,1509702979.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:19.942Z,1509702979.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:20.277Z,1509702980.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:20.293Z,1509702980.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:20.660Z,1509702980.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:20.686Z,1509702980.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:21.059Z,1509702981.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:21.085Z,1509702981.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:21.477Z,1509702981.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:21.493Z,1509702981.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:21.881Z,1509702981.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:21.896Z,1509702981.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:22.277Z,1509702982.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:22.293Z,1509702982.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:22.660Z,1509702982.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:22.685Z,1509702982.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:23.059Z,1509702983.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:23.091Z,1509702983.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:23.477Z,1509702983.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:23.539Z,1509702983.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:23.878Z,1509702983.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:23.919Z,1509702983.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:24.265Z,1509702984.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:24.296Z,1509702984.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:24.664Z,1509702984.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:24.711Z,1509702984.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:25.059Z,1509702985.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:25.079Z,1509702985.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:25.473Z,1509702985.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:25.518Z,1509702985.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:25.869Z,1509702985.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:25.915Z,1509702985.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:26.269Z,1509702986.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:26.285Z,1509702986.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:26.694Z,1509702986.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:26.709Z,1509702986.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:27.059Z,1509702987.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:27.079Z,1509702987.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:27.469Z,1509702987.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:27.485Z,1509702987.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:27.881Z,1509702987.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:27.902Z,1509702987.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:28.270Z,1509702988.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:28.285Z,1509702988.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:28.657Z,1509702988.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:28.673Z,1509702988.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:29.059Z,1509702989.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:29.074Z,1509702989.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:29.473Z,1509702989.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:29.489Z,1509702989.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:29.869Z,1509702989.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:29.885Z,1509702989.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:30.273Z,1509702990.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:30.294Z,1509702990.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:30.657Z,1509702990.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:30.673Z,1509702990.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:31.059Z,1509702991.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:31.074Z,1509702991.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:31.469Z,1509702991.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:31.490Z,1509702991.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:31.865Z,1509702991.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:31.881Z,1509702991.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:32.269Z,1509702992.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:32.285Z,1509702992.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:32.680Z,1509702992.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:32.695Z,1509702992.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:33.056Z,1509702993.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:33.072Z,1509702993.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:33.470Z,1509702993.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:33.488Z,1509702993.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:33.878Z,1509702993.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:33.906Z,1509702993.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:34.270Z,1509702994.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:34.285Z,1509702994.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:34.656Z,1509702994.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:34.671Z,1509702994.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:35.066Z,1509702995.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:35.083Z,1509702995.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:35.466Z,1509702995.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:35.487Z,1509702995.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:35.870Z,1509702995.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:35.891Z,1509702995.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:36.279Z,1509702996.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:36.299Z,1509702996.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:36.656Z,1509702996.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:36.688Z,1509702996.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:37.057Z,1509702997.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:37.088Z,1509702997.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:37.465Z,1509702997.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:37.500Z,1509702997.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:37.870Z,1509702997.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:37.955Z,1509702997.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:38.266Z,1509702998.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:38.296Z,1509702998.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:38.665Z,1509702998.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:38.715Z,1509702998.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:39.057Z,1509702999.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:39.074Z,1509702999.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:39.471Z,1509702999.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:39.527Z,1509702999.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:39.873Z,1509702999.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:39.891Z,1509702999.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:40.279Z,1509703000.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:40.338Z,1509703000.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:40.657Z,1509703000.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:40.691Z,1509703000.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:41.052Z,1509703001.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:41.084Z,1509703001.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:41.473Z,1509703001.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:41.490Z,1509703001.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:41.881Z,1509703001.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:41.903Z,1509703001.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:42.270Z,1509703002.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:42.310Z,1509703002.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:42.661Z,1509703002.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:42.677Z,1509703002.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:43.066Z,1509703003.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:43.081Z,1509703003.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:43.472Z,1509703003.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:43.487Z,1509703003.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:43.885Z,1509703003.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:43.921Z,1509703003.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:44.276Z,1509703004.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:44.291Z,1509703004.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:44.666Z,1509703004.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:44.681Z,1509703004.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:45.067Z,1509703005.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:45.087Z,1509703005.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:45.476Z,1509703005.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:45.498Z,1509703005.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:45.889Z,1509703005.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:45.920Z,1509703005.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:46.273Z,1509703006.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:46.288Z,1509703006.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:46.665Z,1509703006.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:46.680Z,1509703006.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:47.062Z,1509703007.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:47.077Z,1509703007.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:47.477Z,1509703007.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:47.492Z,1509703007.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:47.912Z,1509703007.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:47.965Z,1509703007.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:48.278Z,1509703008.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:48.293Z,1509703008.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:48.667Z,1509703008.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:48.691Z,1509703008.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:49.067Z,1509703009.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:49.082Z,1509703009.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:49.478Z,1509703009.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:49.493Z,1509703009.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:49.881Z,1509703009.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:49.896Z,1509703009.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:50.278Z,1509703010.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:50.298Z,1509703010.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:50.666Z,1509703010.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:50.685Z,1509703010.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:51.067Z,1509703011.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:51.087Z,1509703011.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:51.477Z,1509703011.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:51.492Z,1509703011.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:51.878Z,1509703011.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:51.893Z,1509703011.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:52.277Z,1509703012.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:52.355Z,1509703012.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:52.657Z,1509703012.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:52.691Z,1509703012.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:53.052Z,1509703013.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:53.103Z,1509703013.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:53.477Z,1509703013.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:53.492Z,1509703013.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:53.883Z,1509703013.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:53.927Z,1509703013.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:54.281Z,1509703014.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:54.334Z,1509703014.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:54.660Z,1509703014.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:54.686Z,1509703014.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:57.941Z,1509703017.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:57.957Z,1509703017.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:58.122Z,1509703018.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:58.143Z,1509703018.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:58.505Z,1509703018.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:58.539Z,1509703018.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:58.924Z,1509703018.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:58.939Z,1509703018.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:59.293Z,1509703019.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:59.325Z,1509703019.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:59.702Z,1509703019.702 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T09:56:59.702Z,1509703019.702 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T09:56:59.702Z,1509703019.702 [DropWeight](ERROR): Hardware Fault
2017-11-03T09:56:59.735Z,1509703019.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:56:59.787Z,1509703019.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:56:59.875Z,1509703019.875 [CBIT](INFO): Critical error at 20171103T095659
2017-11-03T09:56:59.877Z,1509703019.877 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T09:56:59.877Z,1509703019.877 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T09:57:00.095Z,1509703020.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:00.123Z,1509703020.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:00.211Z,1509703020.211 [CBIT](INFO): Critical error at 20171103T095659
2017-11-03T09:57:00.514Z,1509703020.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:00.535Z,1509703020.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:00.915Z,1509703020.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:00.931Z,1509703020.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:01.315Z,1509703021.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:01.339Z,1509703021.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:01.706Z,1509703021.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:01.723Z,1509703021.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:02.091Z,1509703022.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:02.129Z,1509703022.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:02.516Z,1509703022.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:02.539Z,1509703022.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:02.914Z,1509703022.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:02.935Z,1509703022.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:03.315Z,1509703023.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:03.339Z,1509703023.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:03.695Z,1509703023.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:03.723Z,1509703023.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:04.095Z,1509703024.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:04.172Z,1509703024.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:04.514Z,1509703024.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:04.532Z,1509703024.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:04.913Z,1509703024.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:04.931Z,1509703024.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:05.313Z,1509703025.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:05.330Z,1509703025.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:05.693Z,1509703025.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:05.721Z,1509703025.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:06.092Z,1509703026.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:06.201Z,1509703026.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:06.505Z,1509703026.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:06.559Z,1509703026.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:06.909Z,1509703026.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:06.943Z,1509703026.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:07.305Z,1509703027.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:07.337Z,1509703027.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:07.702Z,1509703027.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:07.726Z,1509703027.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:08.096Z,1509703028.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:08.150Z,1509703028.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:08.505Z,1509703028.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:08.537Z,1509703028.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:08.913Z,1509703028.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:08.982Z,1509703028.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:09.309Z,1509703029.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:09.341Z,1509703029.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:09.704Z,1509703029.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:09.759Z,1509703029.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:10.090Z,1509703030.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:10.111Z,1509703030.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:10.514Z,1509703030.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:10.543Z,1509703030.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:10.905Z,1509703030.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:10.921Z,1509703030.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:11.306Z,1509703031.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:11.322Z,1509703031.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:11.700Z,1509703031.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:11.723Z,1509703031.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:12.094Z,1509703032.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:12.109Z,1509703032.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:12.513Z,1509703032.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:12.542Z,1509703032.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:12.905Z,1509703032.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:12.922Z,1509703032.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:13.313Z,1509703033.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:13.344Z,1509703033.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:13.732Z,1509703033.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:13.759Z,1509703033.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:14.099Z,1509703034.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:14.115Z,1509703034.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:14.513Z,1509703034.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:14.543Z,1509703034.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:14.901Z,1509703034.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:14.917Z,1509703034.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:15.313Z,1509703035.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:15.342Z,1509703035.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:15.697Z,1509703035.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:15.712Z,1509703035.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:16.103Z,1509703036.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:16.119Z,1509703036.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:16.505Z,1509703036.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:16.522Z,1509703036.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:16.904Z,1509703036.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:16.919Z,1509703036.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:17.306Z,1509703037.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:17.322Z,1509703037.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:17.701Z,1509703037.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:17.716Z,1509703037.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:18.103Z,1509703038.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:18.119Z,1509703038.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:18.509Z,1509703038.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:18.525Z,1509703038.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:18.913Z,1509703038.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:18.931Z,1509703038.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:19.313Z,1509703039.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:19.335Z,1509703039.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:19.693Z,1509703039.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:19.720Z,1509703039.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:20.092Z,1509703040.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:20.153Z,1509703040.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:20.513Z,1509703040.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:20.529Z,1509703040.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:20.917Z,1509703040.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:20.933Z,1509703040.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:21.313Z,1509703041.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:21.335Z,1509703041.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:21.335Z,1509703041.335 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 194
2017-11-03T09:57:21.335Z,1509703041.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T09:57:21.337Z,1509703041.337 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:21.337Z,1509703041.337 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 194
2017-11-03T09:57:21.337Z,1509703041.337 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T09:57:21.339Z,1509703041.339 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:21.339Z,1509703041.339 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 194
2017-11-03T09:57:21.339Z,1509703041.339 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T09:57:21.413Z,1509703041.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T09:57:21.413Z,1509703041.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T09:57:21.413Z,1509703041.413 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T09:57:21.691Z,1509703041.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:21.864Z,1509703041.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T09:57:21.864Z,1509703041.864 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 194
2017-11-03T09:57:21.864Z,1509703041.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T09:57:21.864Z,1509703041.864 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 194
2017-11-03T09:57:21.865Z,1509703041.865 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T09:57:21.865Z,1509703041.865 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 194
2017-11-03T09:57:22.095Z,1509703042.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:22.137Z,1509703042.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T09:57:22.137Z,1509703042.137 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:57:22.137Z,1509703042.137 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:57:22.138Z,1509703042.138 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T09:57:22.138Z,1509703042.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:57:22.139Z,1509703042.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:57:22.139Z,1509703042.139 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T09:57:22.139Z,1509703042.139 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T09:57:22.140Z,1509703042.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T09:57:22.505Z,1509703042.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:22.574Z,1509703042.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:22.905Z,1509703042.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:22.934Z,1509703042.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:23.305Z,1509703043.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:23.374Z,1509703043.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:23.691Z,1509703043.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:23.770Z,1509703043.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:24.092Z,1509703044.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:24.107Z,1509703044.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:24.506Z,1509703044.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:24.532Z,1509703044.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:24.939Z,1509703044.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:24.959Z,1509703044.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:25.305Z,1509703045.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:25.334Z,1509703045.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:25.699Z,1509703045.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:25.751Z,1509703045.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:26.091Z,1509703046.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:26.107Z,1509703046.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:26.505Z,1509703046.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:26.537Z,1509703046.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:26.914Z,1509703046.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:26.938Z,1509703046.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:27.306Z,1509703047.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:27.341Z,1509703047.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:27.716Z,1509703047.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:27.751Z,1509703047.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:28.095Z,1509703048.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:28.111Z,1509703048.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:28.509Z,1509703048.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:28.541Z,1509703048.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:28.905Z,1509703048.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:28.920Z,1509703048.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:29.309Z,1509703049.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:29.341Z,1509703049.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:29.696Z,1509703049.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:29.711Z,1509703049.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:30.099Z,1509703050.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:30.115Z,1509703050.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:30.509Z,1509703050.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:30.540Z,1509703050.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:30.909Z,1509703050.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:30.941Z,1509703050.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:31.309Z,1509703051.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:31.341Z,1509703051.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:31.696Z,1509703051.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:31.712Z,1509703051.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:32.095Z,1509703052.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:32.111Z,1509703052.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:32.507Z,1509703052.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:32.522Z,1509703052.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:32.907Z,1509703052.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:32.923Z,1509703052.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:33.307Z,1509703053.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:33.323Z,1509703053.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:33.703Z,1509703053.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:33.718Z,1509703053.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:34.100Z,1509703054.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:34.115Z,1509703054.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:34.513Z,1509703054.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:34.535Z,1509703054.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:34.913Z,1509703054.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:34.935Z,1509703054.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:35.313Z,1509703055.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:35.335Z,1509703055.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:35.691Z,1509703055.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:35.783Z,1509703055.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:36.089Z,1509703056.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:36.104Z,1509703056.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:36.505Z,1509703056.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:36.569Z,1509703056.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:36.905Z,1509703056.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:36.931Z,1509703056.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:37.304Z,1509703057.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:37.355Z,1509703057.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:37.698Z,1509703057.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:37.730Z,1509703057.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:38.096Z,1509703058.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:38.150Z,1509703058.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:38.505Z,1509703058.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:38.539Z,1509703058.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:38.905Z,1509703058.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:38.939Z,1509703058.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:39.309Z,1509703059.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:39.335Z,1509703059.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:39.725Z,1509703059.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:39.746Z,1509703059.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:40.093Z,1509703060.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:40.115Z,1509703060.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:40.506Z,1509703060.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:40.538Z,1509703060.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:40.906Z,1509703060.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:40.940Z,1509703060.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:41.307Z,1509703061.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:41.337Z,1509703061.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:41.733Z,1509703061.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:41.765Z,1509703061.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:42.095Z,1509703062.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:42.112Z,1509703062.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:42.511Z,1509703062.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:42.539Z,1509703062.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:42.910Z,1509703062.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:42.941Z,1509703062.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:43.309Z,1509703063.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:43.341Z,1509703063.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:43.696Z,1509703063.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:43.712Z,1509703063.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:44.100Z,1509703064.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:44.115Z,1509703064.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:44.509Z,1509703064.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:44.542Z,1509703064.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:44.909Z,1509703064.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:44.939Z,1509703064.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:45.309Z,1509703065.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:45.341Z,1509703065.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:45.696Z,1509703065.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:45.719Z,1509703065.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:46.096Z,1509703066.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:46.119Z,1509703066.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:46.512Z,1509703066.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:46.528Z,1509703066.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:46.913Z,1509703066.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:46.935Z,1509703066.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:47.312Z,1509703067.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:47.328Z,1509703067.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:47.701Z,1509703067.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:47.723Z,1509703067.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:48.101Z,1509703068.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:48.117Z,1509703068.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:48.498Z,1509703068.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:48.533Z,1509703068.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:48.914Z,1509703068.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:48.935Z,1509703068.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:49.314Z,1509703069.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:49.334Z,1509703069.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:49.694Z,1509703069.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:49.728Z,1509703069.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:50.092Z,1509703070.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:50.147Z,1509703070.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:50.514Z,1509703070.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:50.579Z,1509703070.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:50.918Z,1509703070.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:50.939Z,1509703070.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:51.305Z,1509703071.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:51.369Z,1509703071.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:51.696Z,1509703071.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:51.732Z,1509703071.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:52.095Z,1509703072.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:52.151Z,1509703072.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:52.505Z,1509703072.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:52.574Z,1509703072.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:52.905Z,1509703072.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:52.934Z,1509703072.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:53.305Z,1509703073.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:53.332Z,1509703073.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:53.698Z,1509703073.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:53.738Z,1509703073.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:53.746Z,1509703073.746 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T09:52:53.7Z
2017-11-03T09:57:53.746Z,1509703073.746 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T09:57:53.746Z,1509703073.746 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T09:57:54.089Z,1509703074.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:54.111Z,1509703074.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:54.613Z,1509703074.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:54.636Z,1509703074.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:54.906Z,1509703074.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:54.938Z,1509703074.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:55.364Z,1509703075.364 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:57:55.365Z,1509703075.365 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T09:57:55.365Z,1509703075.365 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:57:55.768Z,1509703075.768 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:57:55.914Z,1509703075.914 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:57:58.186Z,1509703078.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:58.203Z,1509703078.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-03T09:57:58.205Z,1509703078.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:58.323Z,1509703078.323 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:57:58.323Z,1509703078.323 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T09:57:58.324Z,1509703078.324 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T09:57:58.336Z,1509703078.336 [Rowe_600LCM](INFO): Initializing
2017-11-03T09:57:58.337Z,1509703078.337 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T09:57:58.337Z,1509703078.337 [Rowe_600LCM](INFO): LCM OK
2017-11-03T09:57:58.337Z,1509703078.337 [Rowe_600LCM](INFO): Powering up
2017-11-03T09:57:58.343Z,1509703078.343 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171103T001125/Courier0228.lzma
2017-11-03T09:57:58.363Z,1509703078.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:58.442Z,1509703078.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T09:57:58.443Z,1509703078.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:58.762Z,1509703078.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:58.842Z,1509703078.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T09:57:58.843Z,1509703078.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:57:59.801Z,1509703079.801 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0228.lzma.bak
2017-11-03T09:57:59.802Z,1509703079.802 [DataOverHttps](INFO): SBD MOMSN=5183284
2017-11-03T09:57:59.847Z,1509703079.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:57:59.862Z,1509703079.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T09:57:59.863Z,1509703079.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:00.218Z,1509703080.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:00.240Z,1509703080.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-03T09:58:00.242Z,1509703080.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:00.404Z,1509703080.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:00.442Z,1509703080.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T09:58:00.444Z,1509703080.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:02.528Z,1509703082.528 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T09:58:02.628Z,1509703082.628 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T09:58:02.629Z,1509703082.629 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T09:58:02.630Z,1509703082.630 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T09:58:02.630Z,1509703082.630 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T09:58:04.050Z,1509703084.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:04.057Z,1509703084.057 [PNI_TCM](ERROR): CRC does not match. Expected:0x27474 got:0x16716
2017-11-03T09:58:04.057Z,1509703084.057 [PNI_TCM](ERROR): CRC does not match. Expected:0x26212 got:0x16717
2017-11-03T09:58:04.058Z,1509703084.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x7447 got:0x16717
2017-11-03T09:58:04.058Z,1509703084.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x6714 got:0x16717
2017-11-03T09:58:04.058Z,1509703084.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x50958 got:0x16716
2017-11-03T09:58:04.059Z,1509703084.059 [PNI_TCM](ERROR): CRC does not match. Expected:0x14076 got:0x16716
2017-11-03T09:58:04.059Z,1509703084.059 [PNI_TCM](ERROR): CRC does not match. Expected:0x51847 got:0x16716
2017-11-03T09:58:04.059Z,1509703084.059 [PNI_TCM](ERROR): CRC does not match. Expected:0x8259 got:0x16717
2017-11-03T09:58:04.060Z,1509703084.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x31833 got:0x16717
2017-11-03T09:58:04.101Z,1509703084.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:04.233Z,1509703084.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:04.283Z,1509703084.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:04.634Z,1509703084.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:04.734Z,1509703084.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:05.039Z,1509703085.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:05.079Z,1509703085.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:05.439Z,1509703085.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:05.491Z,1509703085.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:05.851Z,1509703085.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:05.877Z,1509703085.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:09.132Z,1509703089.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:09.171Z,1509703089.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:09.277Z,1509703089.277 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20171103T001125/Express0229.lzma
2017-11-03T09:58:09.326Z,1509703089.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:09.341Z,1509703089.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:09.699Z,1509703089.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:09.765Z,1509703089.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:10.071Z,1509703090.071 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0229.lzma.bak
2017-11-03T09:58:10.071Z,1509703090.071 [DataOverHttps](INFO): SBD MOMSN=5183288
2017-11-03T09:58:10.095Z,1509703090.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:10.134Z,1509703090.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:10.820Z,1509703090.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:10.836Z,1509703090.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:10.839Z,1509703090.839 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T09:58:10.839Z,1509703090.839 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T09:58:10.839Z,1509703090.839 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T09:58:10.984Z,1509703090.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:11.026Z,1509703091.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:14.178Z,1509703094.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:14.193Z,1509703094.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:14.327Z,1509703094.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:14.370Z,1509703094.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:14.743Z,1509703094.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:14.778Z,1509703094.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:15.123Z,1509703095.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:15.137Z,1509703095.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:15.531Z,1509703095.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:15.551Z,1509703095.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:15.933Z,1509703095.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:15.949Z,1509703095.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:16.332Z,1509703096.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:16.347Z,1509703096.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:16.719Z,1509703096.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:16.739Z,1509703096.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:17.131Z,1509703097.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:17.147Z,1509703097.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:17.527Z,1509703097.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:17.542Z,1509703097.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:17.927Z,1509703097.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:17.947Z,1509703097.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:18.323Z,1509703098.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:18.339Z,1509703098.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:18.732Z,1509703098.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:18.747Z,1509703098.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:19.168Z,1509703099.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:19.198Z,1509703099.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:19.532Z,1509703099.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:19.547Z,1509703099.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:19.924Z,1509703099.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:19.947Z,1509703099.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:20.324Z,1509703100.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:20.339Z,1509703100.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:20.725Z,1509703100.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:20.740Z,1509703100.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:21.130Z,1509703101.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:21.201Z,1509703101.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:21.534Z,1509703101.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:21.564Z,1509703101.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:21.933Z,1509703101.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:22.034Z,1509703102.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:22.333Z,1509703102.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:22.363Z,1509703102.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:22.723Z,1509703102.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:22.783Z,1509703102.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:23.119Z,1509703103.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:23.134Z,1509703103.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:23.519Z,1509703103.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:23.566Z,1509703103.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:23.920Z,1509703103.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:23.971Z,1509703103.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:24.319Z,1509703104.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:24.335Z,1509703104.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:24.737Z,1509703104.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:24.761Z,1509703104.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:25.133Z,1509703105.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:25.164Z,1509703105.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:25.533Z,1509703105.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:25.564Z,1509703105.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:25.925Z,1509703105.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:25.940Z,1509703105.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:26.319Z,1509703106.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:26.335Z,1509703106.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:26.727Z,1509703106.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:26.743Z,1509703106.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:27.119Z,1509703107.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:27.134Z,1509703107.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:27.558Z,1509703107.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:27.573Z,1509703107.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:27.933Z,1509703107.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:27.967Z,1509703107.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:28.337Z,1509703108.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:28.395Z,1509703108.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:28.722Z,1509703108.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:28.737Z,1509703108.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:29.119Z,1509703109.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:29.135Z,1509703109.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:29.518Z,1509703109.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:29.533Z,1509703109.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:29.920Z,1509703109.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:29.935Z,1509703109.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:30.319Z,1509703110.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:30.335Z,1509703110.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:30.725Z,1509703110.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:30.740Z,1509703110.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:31.137Z,1509703111.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:31.167Z,1509703111.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:31.533Z,1509703111.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:31.565Z,1509703111.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:31.920Z,1509703111.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:31.994Z,1509703111.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:32.323Z,1509703112.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:32.343Z,1509703112.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:32.724Z,1509703112.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:32.739Z,1509703112.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:33.139Z,1509703113.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:33.199Z,1509703113.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:33.532Z,1509703113.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:33.548Z,1509703113.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:33.935Z,1509703113.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:33.955Z,1509703113.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:34.337Z,1509703114.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:34.353Z,1509703114.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:34.724Z,1509703114.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:34.739Z,1509703114.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:35.157Z,1509703115.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:35.207Z,1509703115.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:35.515Z,1509703115.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:35.563Z,1509703115.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:35.925Z,1509703115.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:35.983Z,1509703115.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:36.326Z,1509703116.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:36.341Z,1509703116.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:36.739Z,1509703116.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:36.786Z,1509703116.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:37.137Z,1509703117.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:37.153Z,1509703117.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:37.537Z,1509703117.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:37.595Z,1509703117.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:37.916Z,1509703117.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:37.942Z,1509703117.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:38.316Z,1509703118.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:38.391Z,1509703118.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:38.743Z,1509703118.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:38.759Z,1509703118.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:39.119Z,1509703119.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:39.190Z,1509703119.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:39.537Z,1509703119.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:39.567Z,1509703119.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:39.930Z,1509703119.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:39.961Z,1509703119.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:40.337Z,1509703120.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:40.360Z,1509703120.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:40.730Z,1509703120.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:40.762Z,1509703120.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:41.121Z,1509703121.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:41.137Z,1509703121.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:41.525Z,1509703121.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:41.540Z,1509703121.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:41.922Z,1509703121.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:41.938Z,1509703121.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:42.324Z,1509703122.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:42.340Z,1509703122.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:42.746Z,1509703122.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:42.776Z,1509703122.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:43.126Z,1509703123.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:43.142Z,1509703123.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:43.534Z,1509703123.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:43.568Z,1509703123.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:43.919Z,1509703123.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:43.936Z,1509703123.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:44.320Z,1509703124.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:44.339Z,1509703124.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:44.720Z,1509703124.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:44.737Z,1509703124.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:45.124Z,1509703125.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:45.139Z,1509703125.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:45.533Z,1509703125.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:45.566Z,1509703125.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:45.930Z,1509703125.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:45.967Z,1509703125.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:46.330Z,1509703126.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:46.345Z,1509703126.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:46.724Z,1509703126.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:46.747Z,1509703126.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:47.159Z,1509703127.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:47.198Z,1509703127.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:47.526Z,1509703127.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:47.541Z,1509703127.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:47.927Z,1509703127.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:47.947Z,1509703127.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:48.324Z,1509703128.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:48.339Z,1509703128.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:48.730Z,1509703128.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:48.745Z,1509703128.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:49.161Z,1509703129.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:49.243Z,1509703129.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:49.530Z,1509703129.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:49.546Z,1509703129.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:49.926Z,1509703129.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:49.942Z,1509703129.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:50.322Z,1509703130.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:50.339Z,1509703130.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:50.722Z,1509703130.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:50.738Z,1509703130.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:51.127Z,1509703131.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:51.194Z,1509703131.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:51.531Z,1509703131.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:51.598Z,1509703131.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:51.935Z,1509703131.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:51.955Z,1509703131.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:52.336Z,1509703132.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:52.351Z,1509703132.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:52.721Z,1509703132.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:52.786Z,1509703132.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:53.126Z,1509703133.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:53.147Z,1509703133.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:53.524Z,1509703133.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:53.583Z,1509703133.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:53.926Z,1509703133.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:53.982Z,1509703133.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:54.326Z,1509703134.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:54.347Z,1509703134.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:54.740Z,1509703134.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:54.756Z,1509703134.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:55.136Z,1509703135.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:55.151Z,1509703135.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:55.535Z,1509703135.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:55.555Z,1509703135.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:55.928Z,1509703135.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:55.943Z,1509703135.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:56.326Z,1509703136.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:56.347Z,1509703136.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:56.746Z,1509703136.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:56.778Z,1509703136.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:57.124Z,1509703137.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:57.140Z,1509703137.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:57.526Z,1509703137.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:57.546Z,1509703137.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:57.936Z,1509703137.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:57.951Z,1509703137.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:58.336Z,1509703138.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:58.351Z,1509703138.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:58.721Z,1509703138.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:58.737Z,1509703138.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:59.134Z,1509703139.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:59.149Z,1509703139.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:59.524Z,1509703139.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:59.546Z,1509703139.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:58:59.925Z,1509703139.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:58:59.978Z,1509703139.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:00.326Z,1509703140.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:00.341Z,1509703140.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:00.736Z,1509703140.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:00.752Z,1509703140.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:01.178Z,1509703141.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:01.203Z,1509703141.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:01.536Z,1509703141.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:01.551Z,1509703141.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:01.924Z,1509703141.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:01.946Z,1509703141.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:02.326Z,1509703142.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:02.347Z,1509703142.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:02.727Z,1509703142.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:02.742Z,1509703142.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:03.127Z,1509703143.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:03.212Z,1509703143.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:03.531Z,1509703143.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:03.551Z,1509703143.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:03.937Z,1509703143.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:03.952Z,1509703143.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:04.337Z,1509703144.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:04.359Z,1509703144.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:04.721Z,1509703144.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:04.737Z,1509703144.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:05.126Z,1509703145.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:05.141Z,1509703145.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:05.526Z,1509703145.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:05.542Z,1509703145.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:05.923Z,1509703145.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:06.016Z,1509703146.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:06.326Z,1509703146.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:06.347Z,1509703146.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:06.736Z,1509703146.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:06.760Z,1509703146.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:07.132Z,1509703147.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:07.190Z,1509703147.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:07.536Z,1509703147.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:07.551Z,1509703147.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:07.912Z,1509703147.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:07.963Z,1509703147.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:08.321Z,1509703148.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:08.378Z,1509703148.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:08.738Z,1509703148.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:08.778Z,1509703148.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:09.127Z,1509703149.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:09.147Z,1509703149.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:09.536Z,1509703149.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:09.551Z,1509703149.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:09.937Z,1509703149.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:09.959Z,1509703149.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:10.336Z,1509703150.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:10.351Z,1509703150.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:10.742Z,1509703150.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:10.763Z,1509703150.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:11.125Z,1509703151.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:11.147Z,1509703151.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:11.528Z,1509703151.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:11.543Z,1509703151.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:14.829Z,1509703154.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:14.844Z,1509703154.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:14.960Z,1509703154.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:14.992Z,1509703154.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:15.389Z,1509703155.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:15.405Z,1509703155.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:15.781Z,1509703155.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:15.797Z,1509703155.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:16.181Z,1509703156.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:16.197Z,1509703156.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:16.561Z,1509703156.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:16.590Z,1509703156.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:16.964Z,1509703156.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:16.990Z,1509703156.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:17.359Z,1509703157.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:17.390Z,1509703157.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:17.782Z,1509703157.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:17.803Z,1509703157.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:18.185Z,1509703158.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:18.201Z,1509703158.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:18.631Z,1509703158.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:18.690Z,1509703158.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:18.956Z,1509703158.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:18.999Z,1509703158.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:19.401Z,1509703159.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:19.440Z,1509703159.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:19.761Z,1509703159.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:19.793Z,1509703159.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:20.160Z,1509703160.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:20.225Z,1509703160.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:20.570Z,1509703160.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:20.695Z,1509703160.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:20.981Z,1509703160.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:21.011Z,1509703161.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:21.376Z,1509703161.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:21.423Z,1509703161.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:21.764Z,1509703161.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:21.787Z,1509703161.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:22.164Z,1509703162.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:22.219Z,1509703162.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:22.563Z,1509703162.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:22.627Z,1509703162.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:22.958Z,1509703162.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:22.990Z,1509703162.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:23.363Z,1509703163.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:23.389Z,1509703163.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:23.782Z,1509703163.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:23.802Z,1509703163.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:24.185Z,1509703164.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:24.200Z,1509703164.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:24.581Z,1509703164.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:24.604Z,1509703164.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:24.969Z,1509703164.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:24.984Z,1509703164.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:25.360Z,1509703165.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:25.375Z,1509703165.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:25.764Z,1509703165.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:25.780Z,1509703165.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:26.159Z,1509703166.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:26.174Z,1509703166.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:26.574Z,1509703166.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:26.605Z,1509703166.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:26.995Z,1509703166.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:27.010Z,1509703167.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:27.376Z,1509703167.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:27.407Z,1509703167.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:27.763Z,1509703167.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:27.779Z,1509703167.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:28.164Z,1509703168.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:28.180Z,1509703168.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:28.564Z,1509703168.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:28.578Z,1509703168.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:28.966Z,1509703168.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:28.981Z,1509703168.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:29.375Z,1509703169.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:29.407Z,1509703169.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:29.782Z,1509703169.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:29.804Z,1509703169.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:30.178Z,1509703170.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:30.206Z,1509703170.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:30.578Z,1509703170.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:30.608Z,1509703170.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:30.964Z,1509703170.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:30.979Z,1509703170.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:31.368Z,1509703171.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:31.384Z,1509703171.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:31.764Z,1509703171.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:31.780Z,1509703171.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:32.164Z,1509703172.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:32.179Z,1509703172.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:32.588Z,1509703172.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:32.673Z,1509703172.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:32.981Z,1509703172.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:33.003Z,1509703173.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:33.377Z,1509703173.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:33.409Z,1509703173.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:33.764Z,1509703173.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:33.780Z,1509703173.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:34.164Z,1509703174.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:34.180Z,1509703174.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:34.564Z,1509703174.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:34.699Z,1509703174.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:34.968Z,1509703174.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:34.983Z,1509703174.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:35.365Z,1509703175.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:35.415Z,1509703175.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:35.781Z,1509703175.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:35.816Z,1509703175.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:36.170Z,1509703176.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:36.222Z,1509703176.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:36.573Z,1509703176.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:36.662Z,1509703176.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:36.968Z,1509703176.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:36.982Z,1509703176.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:37.368Z,1509703177.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:37.391Z,1509703177.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:37.768Z,1509703177.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:37.791Z,1509703177.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:38.168Z,1509703178.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:38.183Z,1509703178.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:38.582Z,1509703178.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:38.613Z,1509703178.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:38.981Z,1509703178.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:38.996Z,1509703178.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:39.382Z,1509703179.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:39.396Z,1509703179.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:39.757Z,1509703179.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:39.784Z,1509703179.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:40.160Z,1509703180.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:40.192Z,1509703180.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:40.561Z,1509703180.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:40.595Z,1509703180.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:40.965Z,1509703180.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:40.993Z,1509703180.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:41.361Z,1509703181.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:41.397Z,1509703181.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:41.773Z,1509703181.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:41.800Z,1509703181.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:42.185Z,1509703182.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:42.201Z,1509703182.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:42.574Z,1509703182.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:42.607Z,1509703182.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:42.956Z,1509703182.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:42.972Z,1509703182.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:43.359Z,1509703183.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:43.375Z,1509703183.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:43.768Z,1509703183.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:43.795Z,1509703183.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:44.167Z,1509703184.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:44.197Z,1509703184.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:44.583Z,1509703184.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:44.599Z,1509703184.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:44.980Z,1509703184.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:44.996Z,1509703184.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:45.386Z,1509703185.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:45.402Z,1509703185.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:45.761Z,1509703185.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:45.797Z,1509703185.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:46.161Z,1509703186.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:46.188Z,1509703186.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:46.561Z,1509703186.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:46.669Z,1509703186.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:46.963Z,1509703186.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:47.003Z,1509703187.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:47.360Z,1509703187.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:47.376Z,1509703187.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:47.774Z,1509703187.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:47.801Z,1509703187.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:48.182Z,1509703188.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:48.207Z,1509703188.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:48.585Z,1509703188.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:48.719Z,1509703188.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:48.964Z,1509703188.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:48.981Z,1509703188.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:49.364Z,1509703189.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:49.380Z,1509703189.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:49.764Z,1509703189.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:49.818Z,1509703189.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:50.164Z,1509703190.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:50.179Z,1509703190.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:50.570Z,1509703190.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:50.661Z,1509703190.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:50.977Z,1509703190.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:51.031Z,1509703191.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:51.377Z,1509703191.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:51.409Z,1509703191.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:51.768Z,1509703191.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:51.818Z,1509703191.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:52.167Z,1509703192.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:52.181Z,1509703192.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:52.569Z,1509703192.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:52.584Z,1509703192.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:52.964Z,1509703192.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:52.980Z,1509703192.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:53.359Z,1509703193.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:53.374Z,1509703193.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:53.774Z,1509703193.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:53.803Z,1509703193.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:54.174Z,1509703194.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:54.197Z,1509703194.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:54.573Z,1509703194.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:54.602Z,1509703194.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:54.970Z,1509703194.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:54.999Z,1509703194.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:55.367Z,1509703195.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:55.400Z,1509703195.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:55.767Z,1509703195.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:55.802Z,1509703195.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:56.161Z,1509703196.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:56.176Z,1509703196.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:56.573Z,1509703196.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:56.597Z,1509703196.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:56.973Z,1509703196.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:56.998Z,1509703196.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:57.377Z,1509703197.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:57.400Z,1509703197.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:57.760Z,1509703197.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:57.775Z,1509703197.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:58.166Z,1509703198.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:58.201Z,1509703198.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:58.560Z,1509703198.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:58.576Z,1509703198.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:58.780Z,1509703198.780 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T09:59:58.780Z,1509703198.780 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T09:59:58.780Z,1509703198.780 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T09:59:58.962Z,1509703198.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:58.990Z,1509703198.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T09:59:58.991Z,1509703198.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:59.081Z,1509703199.081 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T09:59:59.081Z,1509703199.081 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T09:59:59.185Z,1509703199.185 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T09:59:59.282Z,1509703199.282 [Rowe_600LCM](INFO): Powering down
2017-11-03T09:59:59.368Z,1509703199.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:59.384Z,1509703199.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T09:59:59.385Z,1509703199.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T09:59:59.774Z,1509703199.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T09:59:59.795Z,1509703199.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T09:59:59.796Z,1509703199.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:00.174Z,1509703200.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:00.194Z,1509703200.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:00:00.195Z,1509703200.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:00.573Z,1509703200.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:00.588Z,1509703200.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:00:00.589Z,1509703200.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:00.971Z,1509703200.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:00.990Z,1509703200.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:00:00.991Z,1509703200.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:01.370Z,1509703201.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:01.390Z,1509703201.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:00:01.391Z,1509703201.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:01.769Z,1509703201.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:01.783Z,1509703201.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:00:01.785Z,1509703201.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:02.168Z,1509703202.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:02.183Z,1509703202.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:00:02.184Z,1509703202.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:02.574Z,1509703202.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:02.594Z,1509703202.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:00:02.596Z,1509703202.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:02.977Z,1509703202.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:02.992Z,1509703202.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:00:02.993Z,1509703202.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:03.374Z,1509703203.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:03.435Z,1509703203.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-03T10:00:03.436Z,1509703203.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:03.770Z,1509703203.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:03.791Z,1509703203.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:00:03.792Z,1509703203.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:04.167Z,1509703204.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:04.182Z,1509703204.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:00:04.183Z,1509703204.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:04.571Z,1509703204.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:04.586Z,1509703204.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:00:04.587Z,1509703204.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:04.965Z,1509703204.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:04.979Z,1509703204.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:00:04.980Z,1509703204.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:05.366Z,1509703205.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:05.381Z,1509703205.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:00:05.382Z,1509703205.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:05.774Z,1509703205.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:05.789Z,1509703205.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:00:05.790Z,1509703205.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:06.172Z,1509703206.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:06.180Z,1509703206.180 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:00:06.180Z,1509703206.180 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:00:06.180Z,1509703206.180 [BPC1](ERROR): Communications Fault
2017-11-03T10:00:06.188Z,1509703206.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:00:06.189Z,1509703206.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:06.293Z,1509703206.293 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:00:06.573Z,1509703206.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:06.594Z,1509703206.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:00:06.595Z,1509703206.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:06.971Z,1509703206.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:06.986Z,1509703206.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:00:06.987Z,1509703206.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:07.371Z,1509703207.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:07.390Z,1509703207.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:00:07.391Z,1509703207.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:07.497Z,1509703207.497 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:00:07.497Z,1509703207.497 [BPC1] No Fault, FailCount= 1
2017-11-03T10:00:07.770Z,1509703207.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:07.838Z,1509703207.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T10:00:07.839Z,1509703207.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:08.169Z,1509703208.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:08.183Z,1509703208.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:00:08.185Z,1509703208.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:08.574Z,1509703208.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:08.589Z,1509703208.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:00:08.590Z,1509703208.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:08.977Z,1509703208.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:08.991Z,1509703208.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:00:08.993Z,1509703208.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:09.374Z,1509703209.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:09.422Z,1509703209.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:00:09.423Z,1509703209.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:09.764Z,1509703209.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:09.779Z,1509703209.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:00:09.781Z,1509703209.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:10.169Z,1509703210.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:10.183Z,1509703210.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:00:10.185Z,1509703210.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:10.569Z,1509703210.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:10.583Z,1509703210.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:00:10.585Z,1509703210.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:10.970Z,1509703210.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:10.990Z,1509703210.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:00:10.991Z,1509703210.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:11.368Z,1509703211.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:11.383Z,1509703211.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:00:11.384Z,1509703211.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:11.786Z,1509703211.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:11.820Z,1509703211.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:00:11.821Z,1509703211.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:14.858Z,1509703214.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:14.917Z,1509703214.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-03T10:00:14.918Z,1509703214.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:15.074Z,1509703215.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:15.111Z,1509703215.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T10:00:15.112Z,1509703215.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:15.466Z,1509703215.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:15.481Z,1509703215.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T10:00:15.482Z,1509703215.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:15.870Z,1509703215.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:15.885Z,1509703215.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-03T10:00:15.886Z,1509703215.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:16.258Z,1509703216.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:16.277Z,1509703216.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T10:00:16.278Z,1509703216.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:16.672Z,1509703216.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:16.687Z,1509703216.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T10:00:16.688Z,1509703216.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:17.074Z,1509703217.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:17.094Z,1509703217.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T10:00:17.095Z,1509703217.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:17.471Z,1509703217.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:17.486Z,1509703217.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T10:00:17.487Z,1509703217.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:17.864Z,1509703217.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:17.879Z,1509703217.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T10:00:17.881Z,1509703217.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:18.266Z,1509703218.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:18.282Z,1509703218.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T10:00:18.284Z,1509703218.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:18.664Z,1509703218.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:18.679Z,1509703218.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:19.064Z,1509703219.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:19.079Z,1509703219.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:19.472Z,1509703219.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:19.487Z,1509703219.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:19.873Z,1509703219.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:19.894Z,1509703219.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:20.272Z,1509703220.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:20.344Z,1509703220.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:20.667Z,1509703220.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:20.687Z,1509703220.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:21.065Z,1509703221.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:21.081Z,1509703221.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:21.477Z,1509703221.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:21.493Z,1509703221.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:21.879Z,1509703221.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:21.927Z,1509703221.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:22.276Z,1509703222.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:22.291Z,1509703222.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:22.291Z,1509703222.291 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 195
2017-11-03T10:00:22.291Z,1509703222.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:00:22.293Z,1509703222.293 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:22.293Z,1509703222.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 195
2017-11-03T10:00:22.293Z,1509703222.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:00:22.295Z,1509703222.295 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:22.295Z,1509703222.295 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 195
2017-11-03T10:00:22.295Z,1509703222.295 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:00:22.373Z,1509703222.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:00:22.373Z,1509703222.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:00:22.373Z,1509703222.373 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:00:22.656Z,1509703222.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:22.796Z,1509703222.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:00:22.796Z,1509703222.796 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 195
2017-11-03T10:00:22.797Z,1509703222.797 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:00:22.797Z,1509703222.797 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 195
2017-11-03T10:00:22.797Z,1509703222.797 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:00:22.797Z,1509703222.797 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 195
2017-11-03T10:00:23.051Z,1509703223.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:23.101Z,1509703223.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:00:23.102Z,1509703223.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:00:23.102Z,1509703223.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:00:23.103Z,1509703223.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:00:23.103Z,1509703223.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:00:23.103Z,1509703223.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:00:23.104Z,1509703223.104 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:00:23.104Z,1509703223.104 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:00:23.105Z,1509703223.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:00:23.476Z,1509703223.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:23.490Z,1509703223.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:00:23.491Z,1509703223.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:23.881Z,1509703223.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:23.896Z,1509703223.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:00:23.897Z,1509703223.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:24.277Z,1509703224.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:24.298Z,1509703224.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:00:24.299Z,1509703224.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:24.657Z,1509703224.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:24.683Z,1509703224.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:00:24.684Z,1509703224.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:25.059Z,1509703225.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:25.090Z,1509703225.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:00:25.091Z,1509703225.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:25.473Z,1509703225.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:25.488Z,1509703225.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:00:25.489Z,1509703225.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:25.873Z,1509703225.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:25.887Z,1509703225.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:00:25.888Z,1509703225.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:26.278Z,1509703226.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:26.292Z,1509703226.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:00:26.293Z,1509703226.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:26.660Z,1509703226.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:26.685Z,1509703226.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:00:26.686Z,1509703226.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:27.058Z,1509703227.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:27.082Z,1509703227.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:00:27.083Z,1509703227.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:27.478Z,1509703227.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:27.493Z,1509703227.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:00:27.494Z,1509703227.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:27.880Z,1509703227.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:27.902Z,1509703227.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:00:27.903Z,1509703227.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:28.273Z,1509703228.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:28.290Z,1509703228.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:00:28.291Z,1509703228.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:28.659Z,1509703228.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:28.686Z,1509703228.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:00:28.687Z,1509703228.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:29.055Z,1509703229.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:29.086Z,1509703229.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:00:29.087Z,1509703229.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:29.481Z,1509703229.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:29.495Z,1509703229.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:00:29.496Z,1509703229.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:29.882Z,1509703229.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:29.897Z,1509703229.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:00:29.898Z,1509703229.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:30.277Z,1509703230.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:30.292Z,1509703230.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:00:30.293Z,1509703230.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:30.657Z,1509703230.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:30.683Z,1509703230.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:00:30.684Z,1509703230.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:31.059Z,1509703231.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:31.090Z,1509703231.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:00:31.091Z,1509703231.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:31.479Z,1509703231.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:31.498Z,1509703231.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:00:31.499Z,1509703231.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:31.878Z,1509703231.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:31.898Z,1509703231.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:00:31.899Z,1509703231.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:32.279Z,1509703232.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:32.294Z,1509703232.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:00:32.295Z,1509703232.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:32.656Z,1509703232.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:32.687Z,1509703232.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:00:32.688Z,1509703232.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:33.059Z,1509703233.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:33.086Z,1509703233.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:00:33.087Z,1509703233.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:33.478Z,1509703233.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:33.494Z,1509703233.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:00:33.495Z,1509703233.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:33.882Z,1509703233.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:33.897Z,1509703233.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:00:33.898Z,1509703233.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:34.279Z,1509703234.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:34.338Z,1509703234.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:00:34.339Z,1509703234.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:34.660Z,1509703234.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:34.690Z,1509703234.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:00:34.691Z,1509703234.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:35.052Z,1509703235.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:35.068Z,1509703235.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:00:35.085Z,1509703235.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:35.466Z,1509703235.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:35.492Z,1509703235.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:00:35.493Z,1509703235.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:35.882Z,1509703235.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:35.897Z,1509703235.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:00:35.898Z,1509703235.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:36.266Z,1509703236.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:36.292Z,1509703236.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:00:36.293Z,1509703236.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:36.657Z,1509703236.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:36.671Z,1509703236.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:00:36.698Z,1509703236.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:37.052Z,1509703237.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:37.067Z,1509703237.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:00:37.068Z,1509703237.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:37.480Z,1509703237.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:37.495Z,1509703237.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:00:37.496Z,1509703237.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:37.869Z,1509703237.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:37.895Z,1509703237.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T10:00:37.896Z,1509703237.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:38.269Z,1509703238.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:38.287Z,1509703238.287 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:00:38.287Z,1509703238.287 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:00:38.287Z,1509703238.287 [BPC1](ERROR): Communications Fault
2017-11-03T10:00:38.295Z,1509703238.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:00:38.296Z,1509703238.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:38.378Z,1509703238.378 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:00:38.663Z,1509703238.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:38.693Z,1509703238.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T10:00:38.694Z,1509703238.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:39.058Z,1509703239.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:39.093Z,1509703239.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T10:00:39.094Z,1509703239.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:39.469Z,1509703239.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:39.493Z,1509703239.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T10:00:39.494Z,1509703239.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:39.597Z,1509703239.597 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:00:39.597Z,1509703239.597 [BPC1] No Fault, FailCount= 1
2017-11-03T10:00:39.883Z,1509703239.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:39.959Z,1509703239.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T10:00:39.960Z,1509703239.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:40.269Z,1509703240.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:40.294Z,1509703240.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T10:00:40.295Z,1509703240.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:40.657Z,1509703240.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:40.671Z,1509703240.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:00:40.672Z,1509703240.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:41.056Z,1509703241.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:41.071Z,1509703241.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T10:00:41.088Z,1509703241.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:41.469Z,1509703241.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:41.502Z,1509703241.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T10:00:41.503Z,1509703241.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:41.872Z,1509703241.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:41.897Z,1509703241.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T10:00:41.898Z,1509703241.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:42.270Z,1509703242.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:42.295Z,1509703242.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:42.657Z,1509703242.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:42.671Z,1509703242.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:43.059Z,1509703243.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:43.099Z,1509703243.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:43.470Z,1509703243.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:43.495Z,1509703243.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:43.869Z,1509703243.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:43.902Z,1509703243.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:44.269Z,1509703244.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:44.319Z,1509703244.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:44.657Z,1509703244.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:44.672Z,1509703244.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:45.058Z,1509703245.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:45.073Z,1509703245.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:45.469Z,1509703245.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:45.496Z,1509703245.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:45.870Z,1509703245.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:45.895Z,1509703245.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:46.269Z,1509703246.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:46.295Z,1509703246.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:46.659Z,1509703246.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:46.674Z,1509703246.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:47.056Z,1509703247.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:47.071Z,1509703247.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:47.469Z,1509703247.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:47.495Z,1509703247.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:47.865Z,1509703247.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:47.898Z,1509703247.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:48.270Z,1509703248.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:48.295Z,1509703248.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:48.656Z,1509703248.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:48.671Z,1509703248.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:49.052Z,1509703249.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:49.067Z,1509703249.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:49.469Z,1509703249.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:49.494Z,1509703249.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:49.873Z,1509703249.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:49.897Z,1509703249.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:50.265Z,1509703250.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:50.298Z,1509703250.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:50.657Z,1509703250.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:50.673Z,1509703250.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:51.055Z,1509703251.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:51.070Z,1509703251.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:51.473Z,1509703251.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:51.497Z,1509703251.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:51.869Z,1509703251.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:51.893Z,1509703251.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:52.265Z,1509703252.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:52.295Z,1509703252.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:52.656Z,1509703252.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:52.694Z,1509703252.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:53.056Z,1509703253.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:53.071Z,1509703253.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:53.469Z,1509703253.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:53.499Z,1509703253.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:53.869Z,1509703253.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:53.900Z,1509703253.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:54.274Z,1509703254.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:54.304Z,1509703254.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:54.660Z,1509703254.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:54.675Z,1509703254.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:55.055Z,1509703255.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:55.140Z,1509703255.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:55.474Z,1509703255.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:55.503Z,1509703255.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:55.878Z,1509703255.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:55.930Z,1509703255.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:56.269Z,1509703256.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:56.284Z,1509703256.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:56.660Z,1509703256.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:56.711Z,1509703256.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:57.059Z,1509703257.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:57.110Z,1509703257.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:57.469Z,1509703257.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:57.506Z,1509703257.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:57.878Z,1509703257.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:57.907Z,1509703257.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:58.274Z,1509703258.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:58.304Z,1509703258.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:58.663Z,1509703258.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:58.678Z,1509703258.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:59.059Z,1509703259.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:59.110Z,1509703259.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:59.524Z,1509703259.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:59.559Z,1509703259.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:00:59.875Z,1509703259.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:00:59.910Z,1509703259.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:00.271Z,1509703260.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:00.305Z,1509703260.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:00.665Z,1509703260.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:00.708Z,1509703260.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:01.069Z,1509703261.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:01.118Z,1509703261.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:01.482Z,1509703261.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:01.509Z,1509703261.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:01.871Z,1509703261.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:01.921Z,1509703261.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:02.277Z,1509703262.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:02.292Z,1509703262.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:02.672Z,1509703262.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:02.687Z,1509703262.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:03.068Z,1509703263.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:03.114Z,1509703263.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:03.469Z,1509703263.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:03.484Z,1509703263.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:03.878Z,1509703263.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:03.923Z,1509703263.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:04.274Z,1509703264.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:04.299Z,1509703264.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:04.665Z,1509703264.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:04.685Z,1509703264.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:05.062Z,1509703265.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:05.091Z,1509703265.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:05.475Z,1509703265.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:05.525Z,1509703265.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:05.879Z,1509703265.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:05.930Z,1509703265.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:06.283Z,1509703266.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:06.328Z,1509703266.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:06.680Z,1509703266.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:06.749Z,1509703266.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:07.066Z,1509703267.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:07.123Z,1509703267.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:07.474Z,1509703267.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:07.551Z,1509703267.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:07.879Z,1509703267.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:07.951Z,1509703267.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:08.272Z,1509703268.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:08.347Z,1509703268.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:08.662Z,1509703268.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:08.702Z,1509703268.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:09.060Z,1509703269.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:09.126Z,1509703269.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:09.469Z,1509703269.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:09.526Z,1509703269.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:09.877Z,1509703269.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:09.950Z,1509703269.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:10.273Z,1509703270.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:10.346Z,1509703270.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:10.674Z,1509703270.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:10.711Z,1509703270.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:11.073Z,1509703271.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:11.109Z,1509703271.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:11.471Z,1509703271.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:11.508Z,1509703271.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:11.871Z,1509703271.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:11.938Z,1509703271.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:17.954Z,1509703277.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:18.007Z,1509703278.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:18.160Z,1509703278.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:18.246Z,1509703278.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:18.544Z,1509703278.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:18.560Z,1509703278.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:18.924Z,1509703278.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:18.953Z,1509703278.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:19.325Z,1509703279.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:19.353Z,1509703279.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:19.746Z,1509703279.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:19.762Z,1509703279.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:20.149Z,1509703280.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:20.164Z,1509703280.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:20.545Z,1509703280.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:20.579Z,1509703280.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:20.925Z,1509703280.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:20.982Z,1509703280.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:21.327Z,1509703281.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:21.357Z,1509703281.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:21.725Z,1509703281.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:21.771Z,1509703281.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:22.125Z,1509703282.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:22.159Z,1509703282.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:22.537Z,1509703282.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:22.600Z,1509703282.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:22.937Z,1509703282.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:22.966Z,1509703282.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:23.337Z,1509703283.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:23.400Z,1509703283.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:23.727Z,1509703283.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:23.761Z,1509703283.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:24.125Z,1509703284.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:24.140Z,1509703284.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:24.525Z,1509703284.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:24.540Z,1509703284.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:24.922Z,1509703284.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:24.944Z,1509703284.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:25.326Z,1509703285.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:25.346Z,1509703285.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:25.738Z,1509703285.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:25.762Z,1509703285.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:26.141Z,1509703286.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:26.157Z,1509703286.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:26.541Z,1509703286.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:26.562Z,1509703286.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:26.925Z,1509703286.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:26.940Z,1509703286.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:27.327Z,1509703287.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:27.401Z,1509703287.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:27.727Z,1509703287.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:27.742Z,1509703287.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:28.125Z,1509703288.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:28.140Z,1509703288.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:28.537Z,1509703288.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:28.553Z,1509703288.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:28.941Z,1509703288.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:28.955Z,1509703288.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:29.337Z,1509703289.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:29.353Z,1509703289.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:29.727Z,1509703289.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:29.747Z,1509703289.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:30.126Z,1509703290.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:30.141Z,1509703290.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:30.525Z,1509703290.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:30.540Z,1509703290.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:30.926Z,1509703290.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:30.941Z,1509703290.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:31.324Z,1509703291.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:31.339Z,1509703291.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:31.734Z,1509703291.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:31.750Z,1509703291.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:32.141Z,1509703292.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:32.157Z,1509703292.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:32.537Z,1509703292.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:32.588Z,1509703292.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:32.927Z,1509703292.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:32.947Z,1509703292.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:33.326Z,1509703293.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:33.341Z,1509703293.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:33.726Z,1509703293.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:33.766Z,1509703293.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:34.128Z,1509703294.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:34.171Z,1509703294.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:34.537Z,1509703294.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:34.553Z,1509703294.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:34.934Z,1509703294.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:34.975Z,1509703294.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:35.335Z,1509703295.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:35.355Z,1509703295.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:35.724Z,1509703295.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:35.771Z,1509703295.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:36.120Z,1509703296.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:36.182Z,1509703296.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:36.524Z,1509703296.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:36.544Z,1509703296.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:36.925Z,1509703296.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:36.955Z,1509703296.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:37.333Z,1509703297.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:37.349Z,1509703297.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:37.746Z,1509703297.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:37.779Z,1509703297.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:38.143Z,1509703298.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:38.158Z,1509703298.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:38.537Z,1509703298.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:38.553Z,1509703298.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:38.934Z,1509703298.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:38.950Z,1509703298.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:39.335Z,1509703299.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:39.351Z,1509703299.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:39.734Z,1509703299.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:39.749Z,1509703299.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:40.135Z,1509703300.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:40.150Z,1509703300.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:40.538Z,1509703300.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:40.554Z,1509703300.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:40.936Z,1509703300.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:40.951Z,1509703300.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:41.337Z,1509703301.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:41.358Z,1509703301.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:41.735Z,1509703301.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:41.750Z,1509703301.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:42.134Z,1509703302.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:42.148Z,1509703302.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:42.535Z,1509703302.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:42.550Z,1509703302.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:42.935Z,1509703302.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:42.955Z,1509703302.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:43.334Z,1509703303.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:43.349Z,1509703303.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:43.737Z,1509703303.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:43.752Z,1509703303.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:44.136Z,1509703304.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:44.152Z,1509703304.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:44.537Z,1509703304.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:44.551Z,1509703304.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:44.935Z,1509703304.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:44.954Z,1509703304.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:45.335Z,1509703305.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:45.350Z,1509703305.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:45.734Z,1509703305.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:45.749Z,1509703305.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:46.135Z,1509703306.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:46.150Z,1509703306.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:46.538Z,1509703306.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:46.602Z,1509703306.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:46.941Z,1509703306.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:46.997Z,1509703306.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:47.337Z,1509703307.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:47.352Z,1509703307.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:47.735Z,1509703307.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:47.783Z,1509703307.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:48.132Z,1509703308.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:48.146Z,1509703308.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:48.535Z,1509703308.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:48.579Z,1509703308.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:48.927Z,1509703308.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:48.982Z,1509703308.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:49.332Z,1509703309.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:49.346Z,1509703309.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:49.737Z,1509703309.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:49.758Z,1509703309.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:50.141Z,1509703310.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:50.156Z,1509703310.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:50.537Z,1509703310.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:50.558Z,1509703310.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:50.929Z,1509703310.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:50.944Z,1509703310.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:51.335Z,1509703311.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:51.350Z,1509703311.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:51.735Z,1509703311.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:51.749Z,1509703311.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:52.135Z,1509703312.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:52.150Z,1509703312.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:52.538Z,1509703312.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:52.553Z,1509703312.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:52.941Z,1509703312.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:52.955Z,1509703312.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:53.337Z,1509703313.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:53.351Z,1509703313.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:53.735Z,1509703313.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:53.750Z,1509703313.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:54.128Z,1509703314.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:54.143Z,1509703314.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:54.534Z,1509703314.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:54.549Z,1509703314.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:54.935Z,1509703314.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:54.955Z,1509703314.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:55.334Z,1509703315.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:55.349Z,1509703315.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:55.737Z,1509703315.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:55.753Z,1509703315.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:56.142Z,1509703316.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:56.161Z,1509703316.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:56.544Z,1509703316.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:56.566Z,1509703316.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:56.935Z,1509703316.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:56.950Z,1509703316.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:57.335Z,1509703317.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:57.355Z,1509703317.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:57.732Z,1509703317.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:57.747Z,1509703317.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:58.135Z,1509703318.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:58.154Z,1509703318.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:58.233Z,1509703318.233 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T10:01:58.544Z,1509703318.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:58.559Z,1509703318.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:58.944Z,1509703318.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:58.959Z,1509703318.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:59.345Z,1509703319.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:59.366Z,1509703319.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:01:59.731Z,1509703319.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:01:59.795Z,1509703319.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:00.134Z,1509703320.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:00.148Z,1509703320.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:00.535Z,1509703320.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:00.589Z,1509703320.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:00.935Z,1509703320.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:00.951Z,1509703320.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:01.335Z,1509703321.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:01.387Z,1509703321.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:01.742Z,1509703321.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:01.788Z,1509703321.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:02.145Z,1509703322.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:02.167Z,1509703322.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:02.544Z,1509703322.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:02.566Z,1509703322.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:02.935Z,1509703322.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:02.950Z,1509703322.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:03.334Z,1509703323.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:03.355Z,1509703323.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:03.735Z,1509703323.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:03.750Z,1509703323.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:04.135Z,1509703324.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:04.150Z,1509703324.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:04.545Z,1509703324.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:04.560Z,1509703324.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:04.947Z,1509703324.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:04.967Z,1509703324.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:05.341Z,1509703325.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:05.356Z,1509703325.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:05.734Z,1509703325.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:05.749Z,1509703325.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:06.135Z,1509703326.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:06.155Z,1509703326.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:06.535Z,1509703326.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:06.550Z,1509703326.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:06.933Z,1509703326.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:06.949Z,1509703326.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:07.335Z,1509703327.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:07.355Z,1509703327.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:07.745Z,1509703327.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:07.766Z,1509703327.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:08.144Z,1509703328.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:08.159Z,1509703328.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:08.545Z,1509703328.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:08.560Z,1509703328.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:08.936Z,1509703328.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:08.950Z,1509703328.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:09.334Z,1509703329.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:09.349Z,1509703329.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:09.736Z,1509703329.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:09.751Z,1509703329.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:10.136Z,1509703330.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:10.158Z,1509703330.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:10.545Z,1509703330.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:10.560Z,1509703330.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:10.948Z,1509703330.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:10.963Z,1509703330.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:11.346Z,1509703331.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:11.366Z,1509703331.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:11.734Z,1509703331.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:11.749Z,1509703331.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:12.137Z,1509703332.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:12.152Z,1509703332.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:15.242Z,1509703335.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:15.322Z,1509703335.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:15.463Z,1509703335.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:15.495Z,1509703335.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:15.885Z,1509703335.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:15.939Z,1509703335.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:16.289Z,1509703336.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:16.310Z,1509703336.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:16.684Z,1509703336.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:16.739Z,1509703336.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:17.064Z,1509703337.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:17.096Z,1509703337.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:17.466Z,1509703337.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:17.511Z,1509703337.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:17.867Z,1509703337.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:17.897Z,1509703337.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:18.264Z,1509703338.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:18.291Z,1509703338.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:18.677Z,1509703338.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:18.703Z,1509703338.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:19.078Z,1509703339.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:19.111Z,1509703339.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:19.477Z,1509703339.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:19.507Z,1509703339.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:19.866Z,1509703339.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:19.904Z,1509703339.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:20.264Z,1509703340.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:20.279Z,1509703340.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:20.661Z,1509703340.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:20.676Z,1509703340.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:21.066Z,1509703341.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:21.101Z,1509703341.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:21.474Z,1509703341.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:21.497Z,1509703341.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:21.877Z,1509703341.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:21.907Z,1509703341.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:22.277Z,1509703342.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:22.301Z,1509703342.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:22.671Z,1509703342.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:22.703Z,1509703342.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:23.069Z,1509703343.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:23.092Z,1509703343.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:23.489Z,1509703343.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:23.504Z,1509703343.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:23.891Z,1509703343.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:23.906Z,1509703343.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:24.284Z,1509703344.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:24.299Z,1509703344.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:24.671Z,1509703344.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:24.700Z,1509703344.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:25.064Z,1509703345.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:25.099Z,1509703345.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:25.484Z,1509703345.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:25.499Z,1509703345.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:25.889Z,1509703345.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:25.910Z,1509703345.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:26.287Z,1509703346.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:26.302Z,1509703346.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:26.670Z,1509703346.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:26.693Z,1509703346.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:27.065Z,1509703347.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:27.079Z,1509703347.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:27.478Z,1509703347.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:27.507Z,1509703347.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:27.884Z,1509703347.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:27.927Z,1509703347.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:28.277Z,1509703348.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:28.310Z,1509703348.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:28.667Z,1509703348.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:28.682Z,1509703348.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:29.066Z,1509703349.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:29.081Z,1509703349.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:29.478Z,1509703349.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:29.503Z,1509703349.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:29.878Z,1509703349.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:29.907Z,1509703349.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:30.279Z,1509703350.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:30.308Z,1509703350.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:30.664Z,1509703350.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:30.680Z,1509703350.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:31.064Z,1509703351.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:31.080Z,1509703351.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:31.478Z,1509703351.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:31.509Z,1509703351.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:31.878Z,1509703351.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:31.904Z,1509703351.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:32.278Z,1509703352.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:32.311Z,1509703352.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:32.664Z,1509703352.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:32.673Z,1509703352.673 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:02:32.673Z,1509703352.673 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:02:32.673Z,1509703352.673 [BPC1](ERROR): Communications Fault
2017-11-03T10:02:32.682Z,1509703352.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:32.769Z,1509703352.769 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:02:33.063Z,1509703353.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:33.078Z,1509703353.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:33.477Z,1509703353.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:33.509Z,1509703353.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:33.877Z,1509703353.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:33.909Z,1509703353.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:34.001Z,1509703354.001 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:02:34.001Z,1509703354.001 [BPC1] No Fault, FailCount= 1
2017-11-03T10:02:34.281Z,1509703354.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:34.362Z,1509703354.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:34.664Z,1509703354.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:34.679Z,1509703354.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:35.067Z,1509703355.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:35.087Z,1509703355.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:35.477Z,1509703355.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:35.534Z,1509703355.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:35.877Z,1509703355.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:35.909Z,1509703355.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:36.281Z,1509703356.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:36.315Z,1509703356.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:36.668Z,1509703356.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:36.683Z,1509703356.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:37.067Z,1509703357.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:37.083Z,1509703357.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:37.481Z,1509703357.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:37.515Z,1509703357.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:37.881Z,1509703357.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:37.896Z,1509703357.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:38.273Z,1509703358.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:38.289Z,1509703358.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:38.672Z,1509703358.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:38.687Z,1509703358.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:39.068Z,1509703359.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:39.082Z,1509703359.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:39.473Z,1509703359.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:39.489Z,1509703359.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:39.881Z,1509703359.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:39.915Z,1509703359.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:40.273Z,1509703360.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:40.288Z,1509703360.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:40.668Z,1509703360.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:40.683Z,1509703360.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:41.069Z,1509703361.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:41.084Z,1509703361.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:41.481Z,1509703361.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:41.515Z,1509703361.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:41.874Z,1509703361.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:41.889Z,1509703361.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:42.281Z,1509703362.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:42.315Z,1509703362.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:42.668Z,1509703362.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:42.691Z,1509703362.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:43.067Z,1509703363.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:43.083Z,1509703363.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:43.494Z,1509703363.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:43.515Z,1509703363.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:43.881Z,1509703363.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:43.914Z,1509703363.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:44.274Z,1509703364.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:44.289Z,1509703364.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:44.672Z,1509703364.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:44.688Z,1509703364.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:45.067Z,1509703365.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:45.082Z,1509703365.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:45.482Z,1509703365.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:45.514Z,1509703365.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:45.885Z,1509703365.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:45.914Z,1509703365.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:46.280Z,1509703366.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:46.331Z,1509703366.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:46.668Z,1509703366.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:46.683Z,1509703366.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:47.067Z,1509703367.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:47.076Z,1509703367.076 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:02:47.076Z,1509703367.076 [BPC1] Data Fault, FailCount= 2
2017-11-03T10:02:47.076Z,1509703367.076 [BPC1](ERROR): Data Fault
2017-11-03T10:02:47.084Z,1509703367.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:47.157Z,1509703367.157 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:02:47.485Z,1509703367.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:47.518Z,1509703367.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:47.873Z,1509703367.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:47.889Z,1509703367.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:48.277Z,1509703368.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:48.293Z,1509703368.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:48.397Z,1509703368.397 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:02:48.397Z,1509703368.397 [BPC1] No Fault, FailCount= 2
2017-11-03T10:02:48.672Z,1509703368.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:48.731Z,1509703368.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:49.068Z,1509703369.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:49.083Z,1509703369.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:49.485Z,1509703369.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:49.538Z,1509703369.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:49.877Z,1509703369.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:49.892Z,1509703369.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:50.286Z,1509703370.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:50.317Z,1509703370.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:50.668Z,1509703370.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:50.691Z,1509703370.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:51.071Z,1509703371.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:51.086Z,1509703371.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:51.486Z,1509703371.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:51.520Z,1509703371.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:51.877Z,1509703371.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:51.893Z,1509703371.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:52.277Z,1509703372.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:52.292Z,1509703372.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:52.672Z,1509703372.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:52.687Z,1509703372.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:53.071Z,1509703373.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:53.086Z,1509703373.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:53.473Z,1509703373.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:53.488Z,1509703373.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:53.873Z,1509703373.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:53.889Z,1509703373.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:54.277Z,1509703374.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:54.293Z,1509703374.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:54.667Z,1509703374.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:54.682Z,1509703374.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:55.067Z,1509703375.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:55.087Z,1509703375.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:55.477Z,1509703375.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:55.513Z,1509703375.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:55.881Z,1509703375.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:55.911Z,1509703375.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:56.277Z,1509703376.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:56.309Z,1509703376.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:56.668Z,1509703376.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:56.683Z,1509703376.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:57.071Z,1509703377.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:57.091Z,1509703377.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:57.477Z,1509703377.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:57.509Z,1509703377.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:57.881Z,1509703377.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:57.911Z,1509703377.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:58.277Z,1509703378.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:58.312Z,1509703378.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:58.668Z,1509703378.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:58.683Z,1509703378.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:59.068Z,1509703379.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:59.083Z,1509703379.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:59.477Z,1509703379.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:59.514Z,1509703379.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:02:59.886Z,1509703379.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:02:59.934Z,1509703379.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:00.277Z,1509703380.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:00.293Z,1509703380.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:00.692Z,1509703380.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:00.718Z,1509703380.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:01.063Z,1509703381.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:01.093Z,1509703381.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:01.484Z,1509703381.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:01.550Z,1509703381.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:01.890Z,1509703381.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:01.905Z,1509703381.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:02.285Z,1509703382.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:02.300Z,1509703382.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:02.665Z,1509703382.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:02.728Z,1509703382.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:03.066Z,1509703383.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:03.092Z,1509703383.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:03.485Z,1509703383.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:03.539Z,1509703383.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:03.885Z,1509703383.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:03.942Z,1509703383.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:04.286Z,1509703384.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:04.301Z,1509703384.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:04.667Z,1509703384.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:04.693Z,1509703384.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:05.065Z,1509703385.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:05.092Z,1509703385.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:05.490Z,1509703385.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:05.505Z,1509703385.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:05.890Z,1509703385.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:05.905Z,1509703385.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:06.286Z,1509703386.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:06.301Z,1509703386.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:06.665Z,1509703386.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:06.692Z,1509703386.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:07.084Z,1509703387.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:07.099Z,1509703387.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:07.487Z,1509703387.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:07.502Z,1509703387.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:07.890Z,1509703387.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:07.910Z,1509703387.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:08.287Z,1509703388.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:08.310Z,1509703388.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:08.666Z,1509703388.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:08.693Z,1509703388.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:09.066Z,1509703389.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:09.095Z,1509703389.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:09.488Z,1509703389.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:09.547Z,1509703389.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:09.886Z,1509703389.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:09.905Z,1509703389.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:10.274Z,1509703390.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:10.300Z,1509703390.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:10.667Z,1509703390.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:10.700Z,1509703390.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:11.064Z,1509703391.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:11.096Z,1509703391.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:11.104Z,1509703391.104 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T10:03:11.104Z,1509703391.104 [Default:CheckIn:C.Wait] Stopped
2017-11-03T10:03:11.104Z,1509703391.104 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T10:03:11.104Z,1509703391.104 [Default:CheckIn:D] Running Loop=1
2017-11-03T10:03:11.473Z,1509703391.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:11.501Z,1509703391.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:11.504Z,1509703391.504 [Default:CheckIn:D] Stopped
2017-11-03T10:03:11.504Z,1509703391.504 [Default:CheckIn:E] Running Loop=1
2017-11-03T10:03:11.877Z,1509703391.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:11.911Z,1509703391.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:11.914Z,1509703391.914 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 588.065625 min 
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn:E] Stopped
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn] Stopped
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn](INFO): Running loop #58
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn] Running Loop=58
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T10:03:11.915Z,1509703391.915 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T10:03:12.287Z,1509703392.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:12.303Z,1509703392.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:15.359Z,1509703395.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:15.374Z,1509703395.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:15.529Z,1509703395.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:15.579Z,1509703395.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:15.951Z,1509703395.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:16.021Z,1509703396.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:16.354Z,1509703396.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:16.375Z,1509703396.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:16.750Z,1509703396.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:16.765Z,1509703396.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:17.126Z,1509703397.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:17.163Z,1509703397.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:17.524Z,1509703397.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:17.561Z,1509703397.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:17.925Z,1509703397.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:17.974Z,1509703397.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:18.328Z,1509703398.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:18.395Z,1509703398.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:18.749Z,1509703398.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:18.764Z,1509703398.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:19.153Z,1509703399.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:19.168Z,1509703399.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:19.549Z,1509703399.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:19.564Z,1509703399.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:19.924Z,1509703399.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:19.959Z,1509703399.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:20.331Z,1509703400.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:20.355Z,1509703400.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:20.729Z,1509703400.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:20.756Z,1509703400.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:21.130Z,1509703401.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:21.162Z,1509703401.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:21.545Z,1509703401.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:21.560Z,1509703401.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:21.947Z,1509703401.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:21.962Z,1509703401.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:22.346Z,1509703402.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:22.366Z,1509703402.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:22.724Z,1509703402.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:22.755Z,1509703402.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:23.128Z,1509703403.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:23.159Z,1509703403.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:23.160Z,1509703403.160 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 196
2017-11-03T10:03:23.160Z,1509703403.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:03:23.166Z,1509703403.166 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:23.166Z,1509703403.166 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 196
2017-11-03T10:03:23.166Z,1509703403.166 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:03:23.168Z,1509703403.168 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:23.168Z,1509703403.168 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 196
2017-11-03T10:03:23.168Z,1509703403.168 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:03:23.253Z,1509703403.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:03:23.253Z,1509703403.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:03:23.253Z,1509703403.253 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:03:23.527Z,1509703403.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:23.661Z,1509703403.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:03:23.661Z,1509703403.661 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 196
2017-11-03T10:03:23.661Z,1509703403.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:03:23.661Z,1509703403.661 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 196
2017-11-03T10:03:23.662Z,1509703403.662 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:03:23.662Z,1509703403.662 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 196
2017-11-03T10:03:23.935Z,1509703403.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:23.965Z,1509703403.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:03:23.966Z,1509703403.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:03:23.966Z,1509703403.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:03:23.967Z,1509703403.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:03:23.967Z,1509703403.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:03:23.967Z,1509703403.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:03:23.968Z,1509703403.968 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:03:23.968Z,1509703403.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:03:23.969Z,1509703403.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:03:24.331Z,1509703404.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:24.346Z,1509703404.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:03:24.347Z,1509703404.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:24.745Z,1509703404.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:24.775Z,1509703404.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:03:24.777Z,1509703404.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:25.137Z,1509703405.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:25.152Z,1509703405.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:03:25.153Z,1509703405.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:25.546Z,1509703405.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:25.575Z,1509703405.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:03:25.576Z,1509703405.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:25.931Z,1509703405.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:25.946Z,1509703405.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:03:25.947Z,1509703405.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:26.331Z,1509703406.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:26.346Z,1509703406.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:03:26.347Z,1509703406.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:26.736Z,1509703406.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:26.751Z,1509703406.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:03:26.752Z,1509703406.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:27.131Z,1509703407.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:27.146Z,1509703407.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:03:27.147Z,1509703407.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:27.537Z,1509703407.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:27.552Z,1509703407.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:03:27.553Z,1509703407.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:27.949Z,1509703407.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:27.971Z,1509703407.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:03:27.972Z,1509703407.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:28.345Z,1509703408.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:28.374Z,1509703408.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:03:28.375Z,1509703408.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:28.731Z,1509703408.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:28.746Z,1509703408.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:03:28.747Z,1509703408.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:29.131Z,1509703409.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:29.146Z,1509703409.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:03:29.147Z,1509703409.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:29.529Z,1509703409.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:29.543Z,1509703409.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:03:29.544Z,1509703409.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:29.932Z,1509703409.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:29.947Z,1509703409.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:03:29.948Z,1509703409.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:30.331Z,1509703410.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:30.413Z,1509703410.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-03T10:03:30.414Z,1509703410.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:30.744Z,1509703410.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:30.758Z,1509703410.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:03:30.759Z,1509703410.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:31.145Z,1509703411.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:31.190Z,1509703411.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:03:31.191Z,1509703411.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:31.543Z,1509703411.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:31.562Z,1509703411.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:03:31.563Z,1509703411.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:31.938Z,1509703411.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:31.982Z,1509703411.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:03:31.983Z,1509703411.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:32.332Z,1509703412.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:32.393Z,1509703412.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:03:32.394Z,1509703412.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:32.739Z,1509703412.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:32.758Z,1509703412.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:03:32.759Z,1509703412.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:33.136Z,1509703413.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:33.151Z,1509703413.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:03:33.152Z,1509703413.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:33.543Z,1509703413.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:33.558Z,1509703413.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:03:33.559Z,1509703413.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:33.943Z,1509703413.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:33.962Z,1509703413.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:03:33.963Z,1509703413.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:34.344Z,1509703414.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:34.358Z,1509703414.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:03:34.359Z,1509703414.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:34.732Z,1509703414.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:34.747Z,1509703414.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:03:34.748Z,1509703414.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:35.135Z,1509703415.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:35.150Z,1509703415.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:03:35.151Z,1509703415.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:35.539Z,1509703415.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:35.558Z,1509703415.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:03:35.559Z,1509703415.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:35.939Z,1509703415.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:35.954Z,1509703415.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:03:35.955Z,1509703415.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:36.335Z,1509703416.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:36.350Z,1509703416.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:03:36.351Z,1509703416.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:36.744Z,1509703416.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:36.759Z,1509703416.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:03:36.760Z,1509703416.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:37.144Z,1509703417.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:37.158Z,1509703417.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:03:37.159Z,1509703417.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:37.543Z,1509703417.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:37.562Z,1509703417.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:03:37.563Z,1509703417.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:37.936Z,1509703417.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:37.954Z,1509703417.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:03:37.955Z,1509703417.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:38.331Z,1509703418.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:38.346Z,1509703418.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:03:38.347Z,1509703418.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:38.736Z,1509703418.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:38.751Z,1509703418.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T10:03:38.752Z,1509703418.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:39.139Z,1509703419.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:39.158Z,1509703419.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:03:39.159Z,1509703419.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:39.543Z,1509703419.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:39.566Z,1509703419.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T10:03:39.567Z,1509703419.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:39.945Z,1509703419.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:39.960Z,1509703419.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T10:03:39.961Z,1509703419.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:40.344Z,1509703420.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:40.359Z,1509703420.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T10:03:40.360Z,1509703420.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:40.738Z,1509703420.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:40.758Z,1509703420.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T10:03:40.759Z,1509703420.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:41.136Z,1509703421.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:41.151Z,1509703421.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T10:03:41.152Z,1509703421.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:41.539Z,1509703421.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:41.554Z,1509703421.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:03:41.555Z,1509703421.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:41.939Z,1509703421.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:41.954Z,1509703421.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T10:03:41.955Z,1509703421.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:42.335Z,1509703422.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:42.351Z,1509703422.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T10:03:42.352Z,1509703422.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:42.748Z,1509703422.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:42.763Z,1509703422.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T10:03:42.764Z,1509703422.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:43.147Z,1509703423.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:43.171Z,1509703423.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:43.547Z,1509703423.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:43.567Z,1509703423.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:43.939Z,1509703423.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:43.959Z,1509703423.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:44.332Z,1509703424.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:44.416Z,1509703424.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:44.729Z,1509703424.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:44.756Z,1509703424.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:45.131Z,1509703425.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:45.199Z,1509703425.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:45.549Z,1509703425.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:45.564Z,1509703425.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:45.953Z,1509703425.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:46.009Z,1509703426.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:46.349Z,1509703426.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:46.405Z,1509703426.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:46.731Z,1509703426.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:46.755Z,1509703426.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:47.128Z,1509703427.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:47.160Z,1509703427.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:47.531Z,1509703427.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:47.562Z,1509703427.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:47.931Z,1509703427.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:47.961Z,1509703427.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:48.329Z,1509703428.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:48.355Z,1509703428.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:48.741Z,1509703428.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:48.768Z,1509703428.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:49.154Z,1509703429.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:49.169Z,1509703429.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:49.541Z,1509703429.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:49.568Z,1509703429.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:49.931Z,1509703429.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:49.966Z,1509703429.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:50.331Z,1509703430.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:50.366Z,1509703430.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:50.727Z,1509703430.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:50.743Z,1509703430.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:51.129Z,1509703431.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:51.167Z,1509703431.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:51.542Z,1509703431.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:51.572Z,1509703431.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:51.941Z,1509703431.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:51.976Z,1509703431.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:52.342Z,1509703432.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:52.374Z,1509703432.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:52.733Z,1509703432.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:52.748Z,1509703432.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:53.136Z,1509703433.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:53.151Z,1509703433.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:53.537Z,1509703433.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:53.552Z,1509703433.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:53.938Z,1509703433.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:53.953Z,1509703433.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:54.335Z,1509703434.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:54.351Z,1509703434.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:54.751Z,1509703434.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:54.785Z,1509703434.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:55.151Z,1509703435.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:55.183Z,1509703435.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:55.542Z,1509703435.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:55.558Z,1509703435.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:55.938Z,1509703435.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:55.953Z,1509703435.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:56.338Z,1509703436.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:56.354Z,1509703436.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:56.736Z,1509703436.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:56.752Z,1509703436.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:57.138Z,1509703437.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:57.153Z,1509703437.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:57.542Z,1509703437.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:57.557Z,1509703437.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:57.941Z,1509703437.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:57.957Z,1509703437.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:58.341Z,1509703438.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:58.413Z,1509703438.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:58.738Z,1509703438.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:58.828Z,1509703438.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:59.135Z,1509703439.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:59.151Z,1509703439.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:59.524Z,1509703439.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:59.549Z,1509703439.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:03:59.939Z,1509703439.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:03:59.999Z,1509703439.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:00.336Z,1509703440.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:00.351Z,1509703440.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:00.745Z,1509703440.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:00.788Z,1509703440.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:01.147Z,1509703441.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:01.198Z,1509703441.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:01.548Z,1509703441.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:01.563Z,1509703441.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:01.938Z,1509703441.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:01.953Z,1509703441.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:02.338Z,1509703442.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:02.359Z,1509703442.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:02.736Z,1509703442.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:02.751Z,1509703442.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:03.138Z,1509703443.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:03.153Z,1509703443.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:03.544Z,1509703443.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:03.559Z,1509703443.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:03.948Z,1509703443.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:03.970Z,1509703443.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:04.348Z,1509703444.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:04.362Z,1509703444.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:04.738Z,1509703444.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:04.759Z,1509703444.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:05.138Z,1509703445.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:05.159Z,1509703445.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:05.538Z,1509703445.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:05.553Z,1509703445.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:05.933Z,1509703445.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:05.948Z,1509703445.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:06.335Z,1509703446.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:06.351Z,1509703446.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:06.745Z,1509703446.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:06.760Z,1509703446.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:07.144Z,1509703447.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:07.159Z,1509703447.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:07.548Z,1509703447.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:07.566Z,1509703447.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:07.937Z,1509703447.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:07.952Z,1509703447.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:08.338Z,1509703448.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:08.359Z,1509703448.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:08.739Z,1509703448.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:08.754Z,1509703448.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:09.138Z,1509703449.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:09.153Z,1509703449.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:09.548Z,1509703449.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:09.563Z,1509703449.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:09.948Z,1509703449.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:09.963Z,1509703449.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:10.348Z,1509703450.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:10.370Z,1509703450.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:10.736Z,1509703450.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:10.751Z,1509703450.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:11.138Z,1509703451.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:11.159Z,1509703451.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:11.537Z,1509703451.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:11.552Z,1509703451.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:11.939Z,1509703451.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:11.954Z,1509703451.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:12.339Z,1509703452.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:12.359Z,1509703452.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:15.425Z,1509703455.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:15.515Z,1509703455.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:15.664Z,1509703455.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:15.680Z,1509703455.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:16.060Z,1509703456.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:16.107Z,1509703456.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:16.451Z,1509703456.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:16.465Z,1509703456.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:16.851Z,1509703456.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:16.907Z,1509703456.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:17.247Z,1509703457.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:17.302Z,1509703457.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:17.660Z,1509703457.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:17.675Z,1509703457.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:18.060Z,1509703458.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:18.082Z,1509703458.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:18.459Z,1509703458.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:18.479Z,1509703458.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:18.850Z,1509703458.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:18.865Z,1509703458.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:19.250Z,1509703459.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:19.271Z,1509703459.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:19.648Z,1509703459.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:19.663Z,1509703459.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:20.050Z,1509703460.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:20.065Z,1509703460.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:20.460Z,1509703460.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:20.475Z,1509703460.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:20.859Z,1509703460.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:20.879Z,1509703460.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:21.260Z,1509703461.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:21.275Z,1509703461.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:21.648Z,1509703461.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:21.663Z,1509703461.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:22.047Z,1509703462.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:22.062Z,1509703462.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:22.460Z,1509703462.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:22.475Z,1509703462.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:22.856Z,1509703462.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:22.871Z,1509703462.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:23.259Z,1509703463.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:23.279Z,1509703463.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:23.651Z,1509703463.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:23.666Z,1509703463.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:24.050Z,1509703464.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:24.066Z,1509703464.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:24.459Z,1509703464.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:24.479Z,1509703464.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:24.860Z,1509703464.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:24.875Z,1509703464.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:25.260Z,1509703465.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:25.283Z,1509703465.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:25.649Z,1509703465.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:25.664Z,1509703465.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:26.050Z,1509703466.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:26.070Z,1509703466.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:26.461Z,1509703466.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:26.476Z,1509703466.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:26.860Z,1509703466.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:26.879Z,1509703466.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:27.260Z,1509703467.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:27.275Z,1509703467.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:27.648Z,1509703467.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:27.663Z,1509703467.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:28.047Z,1509703468.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:28.062Z,1509703468.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:28.460Z,1509703468.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:28.475Z,1509703468.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:28.860Z,1509703468.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:28.875Z,1509703468.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:29.259Z,1509703469.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:29.342Z,1509703469.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:29.649Z,1509703469.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:29.663Z,1509703469.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:30.050Z,1509703470.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:30.110Z,1509703470.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:30.460Z,1509703470.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:30.476Z,1509703470.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:30.860Z,1509703470.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:30.904Z,1509703470.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:31.259Z,1509703471.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:31.279Z,1509703471.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:31.648Z,1509703471.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:31.703Z,1509703471.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:32.050Z,1509703472.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:32.065Z,1509703472.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:32.459Z,1509703472.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:32.479Z,1509703472.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:32.859Z,1509703472.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:32.879Z,1509703472.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:33.260Z,1509703473.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:33.282Z,1509703473.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:33.650Z,1509703473.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:33.671Z,1509703473.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:34.048Z,1509703474.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:34.063Z,1509703474.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:34.460Z,1509703474.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:34.475Z,1509703474.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:34.859Z,1509703474.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:34.879Z,1509703474.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:35.260Z,1509703475.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:35.275Z,1509703475.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:35.651Z,1509703475.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:35.666Z,1509703475.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:36.050Z,1509703476.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:36.071Z,1509703476.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:36.460Z,1509703476.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:36.475Z,1509703476.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:36.860Z,1509703476.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:36.875Z,1509703476.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:37.260Z,1509703477.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:37.275Z,1509703477.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:37.648Z,1509703477.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:37.663Z,1509703477.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:38.046Z,1509703478.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:38.069Z,1509703478.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:38.460Z,1509703478.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:38.475Z,1509703478.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:38.860Z,1509703478.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:38.875Z,1509703478.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:39.261Z,1509703479.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:39.276Z,1509703479.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:39.650Z,1509703479.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:39.665Z,1509703479.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:40.050Z,1509703480.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:40.065Z,1509703480.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:40.463Z,1509703480.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:40.482Z,1509703480.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:40.861Z,1509703480.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:40.876Z,1509703480.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:41.262Z,1509703481.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:41.277Z,1509703481.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:41.653Z,1509703481.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:41.668Z,1509703481.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:42.048Z,1509703482.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:42.064Z,1509703482.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:42.461Z,1509703482.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:42.476Z,1509703482.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:42.858Z,1509703482.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:42.882Z,1509703482.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:43.262Z,1509703483.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:43.326Z,1509703483.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:43.653Z,1509703483.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:43.718Z,1509703483.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:44.043Z,1509703484.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:44.072Z,1509703484.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:44.463Z,1509703484.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:44.511Z,1509703484.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:44.854Z,1509703484.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:44.875Z,1509703484.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:45.262Z,1509703485.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:45.311Z,1509703485.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:45.640Z,1509703485.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:45.699Z,1509703485.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:46.043Z,1509703486.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:46.063Z,1509703486.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:46.453Z,1509703486.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:46.492Z,1509703486.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:46.857Z,1509703486.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:46.890Z,1509703486.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:47.257Z,1509703487.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:47.289Z,1509703487.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:47.640Z,1509703487.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:47.655Z,1509703487.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:48.039Z,1509703488.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:48.059Z,1509703488.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:48.457Z,1509703488.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:48.488Z,1509703488.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:48.853Z,1509703488.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:48.867Z,1509703488.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:49.250Z,1509703489.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:49.275Z,1509703489.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:49.650Z,1509703489.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:49.665Z,1509703489.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:50.050Z,1509703490.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:50.065Z,1509703490.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:50.454Z,1509703490.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:50.469Z,1509703490.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:50.857Z,1509703490.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:50.872Z,1509703490.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:51.253Z,1509703491.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:51.274Z,1509703491.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:51.648Z,1509703491.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:51.663Z,1509703491.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:52.050Z,1509703492.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:52.065Z,1509703492.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:52.453Z,1509703492.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:52.468Z,1509703492.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:52.857Z,1509703492.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:52.873Z,1509703492.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:53.254Z,1509703493.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:53.269Z,1509703493.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:53.643Z,1509703493.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:53.662Z,1509703493.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:54.045Z,1509703494.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:54.060Z,1509703494.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:54.450Z,1509703494.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:54.465Z,1509703494.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:54.853Z,1509703494.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:54.868Z,1509703494.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:55.251Z,1509703495.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:55.271Z,1509703495.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:55.654Z,1509703495.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:55.669Z,1509703495.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:56.050Z,1509703496.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:56.065Z,1509703496.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:56.450Z,1509703496.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:56.471Z,1509703496.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:56.849Z,1509703496.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:56.864Z,1509703496.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:57.249Z,1509703497.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:57.263Z,1509703497.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:57.660Z,1509703497.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:57.726Z,1509703497.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:58.060Z,1509703498.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:58.126Z,1509703498.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:58.461Z,1509703498.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:58.475Z,1509703498.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:58.836Z,1509703498.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:58.904Z,1509703498.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:59.248Z,1509703499.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:59.266Z,1509703499.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:04:59.650Z,1509703499.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:04:59.687Z,1509703499.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:00.050Z,1509703500.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:00.106Z,1509703500.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:00.460Z,1509703500.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:00.475Z,1509703500.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:00.861Z,1509703500.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:00.882Z,1509703500.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:01.260Z,1509703501.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:01.275Z,1509703501.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:01.651Z,1509703501.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:01.666Z,1509703501.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:02.049Z,1509703502.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:02.064Z,1509703502.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:02.460Z,1509703502.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:02.476Z,1509703502.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:02.861Z,1509703502.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:02.876Z,1509703502.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:03.261Z,1509703503.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:03.275Z,1509703503.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:03.650Z,1509703503.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:03.671Z,1509703503.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:04.040Z,1509703504.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:04.066Z,1509703504.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:04.461Z,1509703504.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:04.482Z,1509703504.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:04.863Z,1509703504.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:04.883Z,1509703504.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:05.260Z,1509703505.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:05.275Z,1509703505.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:05.651Z,1509703505.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:05.666Z,1509703505.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:06.049Z,1509703506.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:06.064Z,1509703506.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:06.460Z,1509703506.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:06.475Z,1509703506.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:06.864Z,1509703506.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:06.882Z,1509703506.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:07.260Z,1509703507.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:07.275Z,1509703507.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:07.649Z,1509703507.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:07.664Z,1509703507.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:08.040Z,1509703508.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:08.071Z,1509703508.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:08.460Z,1509703508.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:08.475Z,1509703508.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:08.860Z,1509703508.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:08.876Z,1509703508.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:09.261Z,1509703509.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:09.282Z,1509703509.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:09.651Z,1509703509.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:09.666Z,1509703509.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:10.049Z,1509703510.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:10.064Z,1509703510.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:10.440Z,1509703510.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:10.465Z,1509703510.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:10.861Z,1509703510.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:10.876Z,1509703510.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:11.263Z,1509703511.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:11.283Z,1509703511.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:11.661Z,1509703511.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:11.676Z,1509703511.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:12.050Z,1509703512.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:12.091Z,1509703512.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:12.443Z,1509703512.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:12.526Z,1509703512.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:15.520Z,1509703515.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:15.535Z,1509703515.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:15.640Z,1509703515.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:15.678Z,1509703515.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:16.068Z,1509703516.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:16.083Z,1509703516.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:16.472Z,1509703516.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:16.517Z,1509703516.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:16.868Z,1509703516.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:16.883Z,1509703516.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:17.257Z,1509703517.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:17.315Z,1509703517.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:17.658Z,1509703517.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:17.699Z,1509703517.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:18.058Z,1509703518.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:18.079Z,1509703518.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:18.469Z,1509703518.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:18.484Z,1509703518.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:18.870Z,1509703518.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:18.885Z,1509703518.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:19.270Z,1509703519.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:19.285Z,1509703519.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:19.648Z,1509703519.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:19.675Z,1509703519.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:20.048Z,1509703520.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:20.074Z,1509703520.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:20.473Z,1509703520.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:20.491Z,1509703520.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:20.866Z,1509703520.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:20.881Z,1509703520.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:21.270Z,1509703521.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:21.285Z,1509703521.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:21.662Z,1509703521.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:21.677Z,1509703521.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:22.057Z,1509703522.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:22.080Z,1509703522.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:22.474Z,1509703522.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:22.489Z,1509703522.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:22.885Z,1509703522.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:22.917Z,1509703522.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:23.269Z,1509703523.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:23.284Z,1509703523.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:23.658Z,1509703523.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:23.673Z,1509703523.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:24.060Z,1509703524.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:24.079Z,1509703524.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:24.469Z,1509703524.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:24.491Z,1509703524.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:24.872Z,1509703524.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:24.890Z,1509703524.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:25.269Z,1509703525.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:25.285Z,1509703525.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:25.657Z,1509703525.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:25.673Z,1509703525.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:26.058Z,1509703526.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:26.073Z,1509703526.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:26.468Z,1509703526.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:26.485Z,1509703526.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:26.868Z,1509703526.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:26.885Z,1509703526.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:27.269Z,1509703527.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:27.284Z,1509703527.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:27.649Z,1509703527.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:27.675Z,1509703527.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:28.050Z,1509703528.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:28.077Z,1509703528.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:28.469Z,1509703528.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:28.484Z,1509703528.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:28.872Z,1509703528.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:28.887Z,1509703528.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:29.269Z,1509703529.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:29.284Z,1509703529.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:29.651Z,1509703529.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:29.695Z,1509703529.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:30.048Z,1509703530.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:30.103Z,1509703530.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:30.469Z,1509703530.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:30.485Z,1509703530.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:30.857Z,1509703530.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:30.907Z,1509703530.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:31.269Z,1509703531.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:31.284Z,1509703531.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:31.649Z,1509703531.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:31.698Z,1509703531.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:32.050Z,1509703532.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:32.095Z,1509703532.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:32.457Z,1509703532.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:32.491Z,1509703532.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:32.869Z,1509703532.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:32.884Z,1509703532.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:33.270Z,1509703533.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:33.285Z,1509703533.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:33.649Z,1509703533.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:33.680Z,1509703533.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:34.050Z,1509703534.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:34.088Z,1509703534.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:34.457Z,1509703534.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:34.484Z,1509703534.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:34.873Z,1509703534.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:34.891Z,1509703534.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:35.261Z,1509703535.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:35.291Z,1509703535.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:35.649Z,1509703535.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:35.663Z,1509703535.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:36.048Z,1509703536.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:36.063Z,1509703536.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:36.461Z,1509703536.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:36.491Z,1509703536.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:36.875Z,1509703536.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:36.890Z,1509703536.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:37.261Z,1509703537.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:37.291Z,1509703537.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:37.651Z,1509703537.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:37.675Z,1509703537.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:38.050Z,1509703538.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:38.086Z,1509703538.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:38.461Z,1509703538.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:38.491Z,1509703538.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:38.861Z,1509703538.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:38.884Z,1509703538.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:39.261Z,1509703539.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:39.285Z,1509703539.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:39.649Z,1509703539.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:39.681Z,1509703539.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:40.049Z,1509703540.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:40.064Z,1509703540.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:40.461Z,1509703540.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:40.490Z,1509703540.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:40.862Z,1509703540.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:40.891Z,1509703540.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:41.258Z,1509703541.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:41.281Z,1509703541.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:41.651Z,1509703541.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:41.683Z,1509703541.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:42.051Z,1509703542.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:42.083Z,1509703542.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:42.462Z,1509703542.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:42.491Z,1509703542.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:42.870Z,1509703542.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:42.886Z,1509703542.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:43.262Z,1509703543.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:43.287Z,1509703543.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:43.651Z,1509703543.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:43.709Z,1509703543.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:44.051Z,1509703544.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:44.107Z,1509703544.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:44.461Z,1509703544.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:44.491Z,1509703544.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:44.870Z,1509703544.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:44.933Z,1509703544.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:45.261Z,1509703545.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:45.290Z,1509703545.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:45.649Z,1509703545.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:45.702Z,1509703545.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:46.048Z,1509703546.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:46.063Z,1509703546.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:46.461Z,1509703546.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:46.530Z,1509703546.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:46.861Z,1509703546.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:46.891Z,1509703546.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:47.261Z,1509703547.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:47.291Z,1509703547.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:47.649Z,1509703547.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:47.664Z,1509703547.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:48.055Z,1509703548.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:48.083Z,1509703548.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:48.461Z,1509703548.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:48.491Z,1509703548.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:48.861Z,1509703548.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:48.891Z,1509703548.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:49.261Z,1509703549.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:49.285Z,1509703549.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:49.651Z,1509703549.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:49.675Z,1509703549.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:50.048Z,1509703550.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:50.086Z,1509703550.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:50.461Z,1509703550.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:50.491Z,1509703550.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:50.873Z,1509703550.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:50.891Z,1509703550.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:51.261Z,1509703551.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:51.288Z,1509703551.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:51.649Z,1509703551.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:51.680Z,1509703551.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:52.048Z,1509703552.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:52.063Z,1509703552.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:52.460Z,1509703552.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:52.498Z,1509703552.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:52.863Z,1509703552.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:52.897Z,1509703552.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:53.263Z,1509703553.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:53.300Z,1509703553.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:53.662Z,1509703553.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:53.695Z,1509703553.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:54.061Z,1509703554.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:54.098Z,1509703554.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:54.490Z,1509703554.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:54.518Z,1509703554.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:54.890Z,1509703554.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:54.914Z,1509703554.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:55.293Z,1509703555.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:55.321Z,1509703555.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:55.657Z,1509703555.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:55.705Z,1509703555.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:56.093Z,1509703556.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:56.108Z,1509703556.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:56.460Z,1509703556.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:56.508Z,1509703556.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:56.885Z,1509703556.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:56.917Z,1509703556.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:57.272Z,1509703557.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:57.296Z,1509703557.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:57.662Z,1509703557.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:57.691Z,1509703557.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:58.049Z,1509703558.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:58.147Z,1509703558.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:58.473Z,1509703558.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:58.547Z,1509703558.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:58.876Z,1509703558.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:58.900Z,1509703558.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:59.279Z,1509703559.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:59.342Z,1509703559.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:05:59.650Z,1509703559.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:05:59.667Z,1509703559.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:00.050Z,1509703560.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:00.107Z,1509703560.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:00.468Z,1509703560.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:00.550Z,1509703560.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:00.892Z,1509703560.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:00.939Z,1509703560.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:01.261Z,1509703561.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:01.303Z,1509703561.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:01.654Z,1509703561.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:01.691Z,1509703561.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:02.052Z,1509703562.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:02.080Z,1509703562.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:02.467Z,1509703562.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:02.492Z,1509703562.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:02.830Z,1509703562.830 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T10:06:02.830Z,1509703562.830 [NAL9602] Data Fault, FailCount= 4
2017-11-03T10:06:02.830Z,1509703562.830 [NAL9602](ERROR): Data Fault
2017-11-03T10:06:02.863Z,1509703562.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:02.891Z,1509703562.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:02.993Z,1509703562.993 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T10:06:03.229Z,1509703563.229 [NAL9602](INFO): Powering down
2017-11-03T10:06:03.249Z,1509703563.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:03.287Z,1509703563.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:03.648Z,1509703563.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:03.681Z,1509703563.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:04.048Z,1509703564.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:04.116Z,1509703564.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:04.206Z,1509703564.206 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T10:06:04.206Z,1509703564.206 [NAL9602] No Fault, FailCount= 4
2017-11-03T10:06:04.448Z,1509703564.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:04.486Z,1509703564.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:04.848Z,1509703564.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:04.875Z,1509703564.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:05.248Z,1509703565.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:05.299Z,1509703565.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:05.648Z,1509703565.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:05.703Z,1509703565.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:06.048Z,1509703566.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:06.081Z,1509703566.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:06.456Z,1509703566.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:06.525Z,1509703566.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:06.848Z,1509703566.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:06.889Z,1509703566.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:07.248Z,1509703567.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:07.286Z,1509703567.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:07.648Z,1509703567.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:07.695Z,1509703567.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:08.048Z,1509703568.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:08.090Z,1509703568.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:08.448Z,1509703568.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:08.482Z,1509703568.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:08.852Z,1509703568.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:08.887Z,1509703568.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:09.248Z,1509703569.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:09.302Z,1509703569.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:09.648Z,1509703569.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:09.684Z,1509703569.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:10.048Z,1509703570.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:10.096Z,1509703570.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:10.446Z,1509703570.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:10.481Z,1509703570.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:10.850Z,1509703570.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:10.881Z,1509703570.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:11.250Z,1509703571.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:11.281Z,1509703571.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:11.648Z,1509703571.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:11.683Z,1509703571.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:12.050Z,1509703572.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:12.081Z,1509703572.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:12.451Z,1509703572.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:12.499Z,1509703572.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:15.534Z,1509703575.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:15.602Z,1509703575.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:15.741Z,1509703575.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:15.756Z,1509703575.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:16.136Z,1509703576.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:16.151Z,1509703576.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:16.536Z,1509703576.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:16.581Z,1509703576.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:16.936Z,1509703576.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:16.951Z,1509703576.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:17.339Z,1509703577.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:17.381Z,1509703577.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:17.736Z,1509703577.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:17.781Z,1509703577.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:18.135Z,1509703578.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:18.150Z,1509703578.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:18.535Z,1509703578.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:18.550Z,1509703578.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:18.936Z,1509703578.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:18.950Z,1509703578.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:19.336Z,1509703579.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:19.351Z,1509703579.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:19.736Z,1509703579.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:19.750Z,1509703579.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:20.136Z,1509703580.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:20.150Z,1509703580.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:20.535Z,1509703580.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:20.550Z,1509703580.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:20.940Z,1509703580.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:20.954Z,1509703580.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:21.336Z,1509703581.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:21.350Z,1509703581.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:21.736Z,1509703581.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:21.751Z,1509703581.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:22.135Z,1509703582.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:22.150Z,1509703582.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:22.535Z,1509703582.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:22.549Z,1509703582.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:22.935Z,1509703582.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:22.950Z,1509703582.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:23.336Z,1509703583.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:23.350Z,1509703583.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:23.736Z,1509703583.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:23.750Z,1509703583.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:24.135Z,1509703584.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:24.151Z,1509703584.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:24.151Z,1509703584.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 197
2017-11-03T10:06:24.151Z,1509703584.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:06:24.153Z,1509703584.153 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:24.153Z,1509703584.153 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 197
2017-11-03T10:06:24.153Z,1509703584.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:06:24.155Z,1509703584.155 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:24.155Z,1509703584.155 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 197
2017-11-03T10:06:24.155Z,1509703584.155 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:06:24.233Z,1509703584.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:06:24.233Z,1509703584.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:06:24.233Z,1509703584.233 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:06:24.538Z,1509703584.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:24.628Z,1509703584.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:06:24.628Z,1509703584.628 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 197
2017-11-03T10:06:24.629Z,1509703584.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:06:24.629Z,1509703584.629 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 197
2017-11-03T10:06:24.629Z,1509703584.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:06:24.629Z,1509703584.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 197
2017-11-03T10:06:24.939Z,1509703584.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:24.953Z,1509703584.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:06:24.953Z,1509703584.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:06:24.953Z,1509703584.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:06:24.954Z,1509703584.954 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:06:24.954Z,1509703584.954 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:06:24.954Z,1509703584.954 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:06:24.955Z,1509703584.955 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:06:24.955Z,1509703584.955 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:06:24.956Z,1509703584.956 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:06:25.339Z,1509703585.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:25.353Z,1509703585.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:06:25.354Z,1509703585.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:25.741Z,1509703585.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:25.755Z,1509703585.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:06:25.756Z,1509703585.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:26.142Z,1509703586.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:26.162Z,1509703586.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:06:26.163Z,1509703586.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:26.540Z,1509703586.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:26.555Z,1509703586.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:06:26.556Z,1509703586.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:26.940Z,1509703586.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:26.955Z,1509703586.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:06:26.956Z,1509703586.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:27.342Z,1509703587.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:27.362Z,1509703587.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:06:27.363Z,1509703587.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:27.742Z,1509703587.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:27.762Z,1509703587.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:06:27.763Z,1509703587.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:28.140Z,1509703588.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:28.155Z,1509703588.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:06:28.156Z,1509703588.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:28.542Z,1509703588.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:28.557Z,1509703588.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:06:28.558Z,1509703588.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:28.940Z,1509703588.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:28.955Z,1509703588.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:06:28.956Z,1509703588.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:29.340Z,1509703589.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:29.355Z,1509703589.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:06:29.356Z,1509703589.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:29.742Z,1509703589.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:29.823Z,1509703589.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-03T10:06:29.824Z,1509703589.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:30.142Z,1509703590.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:30.162Z,1509703590.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:06:30.163Z,1509703590.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:30.533Z,1509703590.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:30.578Z,1509703590.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:06:30.579Z,1509703590.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:30.934Z,1509703590.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:30.948Z,1509703590.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:06:30.949Z,1509703590.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:31.333Z,1509703591.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:31.378Z,1509703591.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:06:31.379Z,1509703591.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:31.732Z,1509703591.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:31.746Z,1509703591.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:06:31.747Z,1509703591.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:32.131Z,1509703592.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:32.171Z,1509703592.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:06:32.172Z,1509703592.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:32.535Z,1509703592.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:32.550Z,1509703592.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:06:32.551Z,1509703592.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:32.933Z,1509703592.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:32.948Z,1509703592.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:06:32.949Z,1509703592.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:33.315Z,1509703593.315 [NAL9602](INFO): Powering up NAL9602
2017-11-03T10:06:33.334Z,1509703593.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:33.348Z,1509703593.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:06:33.349Z,1509703593.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:33.733Z,1509703593.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:33.748Z,1509703593.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:06:33.749Z,1509703593.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:34.133Z,1509703594.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:34.159Z,1509703594.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:06:34.160Z,1509703594.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:34.534Z,1509703594.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:34.549Z,1509703594.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:06:34.550Z,1509703594.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:34.933Z,1509703594.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:34.947Z,1509703594.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:06:34.949Z,1509703594.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:35.335Z,1509703595.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:35.349Z,1509703595.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:06:35.350Z,1509703595.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:35.734Z,1509703595.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:35.749Z,1509703595.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:06:35.750Z,1509703595.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:36.133Z,1509703596.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:36.147Z,1509703596.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:06:36.149Z,1509703596.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:36.533Z,1509703596.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:36.547Z,1509703596.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:06:36.549Z,1509703596.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:36.930Z,1509703596.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:36.944Z,1509703596.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:06:36.945Z,1509703596.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:37.333Z,1509703597.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:37.347Z,1509703597.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:06:37.349Z,1509703597.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:37.733Z,1509703597.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:37.785Z,1509703597.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:06:37.786Z,1509703597.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:38.134Z,1509703598.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:38.149Z,1509703598.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:06:38.150Z,1509703598.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:38.533Z,1509703598.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:38.547Z,1509703598.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:06:38.549Z,1509703598.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:38.933Z,1509703598.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:38.948Z,1509703598.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:06:38.949Z,1509703598.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:39.332Z,1509703599.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:39.347Z,1509703599.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:06:39.348Z,1509703599.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:39.735Z,1509703599.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:39.750Z,1509703599.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T10:06:39.751Z,1509703599.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:40.133Z,1509703600.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:40.147Z,1509703600.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:06:40.149Z,1509703600.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:40.555Z,1509703600.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:40.569Z,1509703600.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T10:06:40.570Z,1509703600.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:40.932Z,1509703600.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:40.951Z,1509703600.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T10:06:40.951Z,1509703600.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:41.332Z,1509703601.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:41.347Z,1509703601.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T10:06:41.347Z,1509703601.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:41.750Z,1509703601.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:41.773Z,1509703601.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T10:06:41.774Z,1509703601.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:42.131Z,1509703602.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:42.165Z,1509703602.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T10:06:42.166Z,1509703602.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:42.533Z,1509703602.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:42.556Z,1509703602.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:06:42.561Z,1509703602.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:42.932Z,1509703602.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:42.947Z,1509703602.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T10:06:42.948Z,1509703602.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:43.333Z,1509703603.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:43.348Z,1509703603.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T10:06:43.349Z,1509703603.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:43.737Z,1509703603.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:43.778Z,1509703603.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T10:06:43.779Z,1509703603.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:44.145Z,1509703604.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:44.199Z,1509703604.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:44.515Z,1509703604.515 [NAL9602](INFO): NAL9602 initialized
2017-11-03T10:06:44.534Z,1509703604.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:44.549Z,1509703604.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:44.937Z,1509703604.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:44.983Z,1509703604.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:45.349Z,1509703605.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:45.376Z,1509703605.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:45.746Z,1509703605.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:45.795Z,1509703605.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:46.134Z,1509703606.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:46.186Z,1509703606.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:46.535Z,1509703606.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:46.551Z,1509703606.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:46.933Z,1509703606.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:46.949Z,1509703606.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:47.334Z,1509703607.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:47.350Z,1509703607.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:47.731Z,1509703607.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:47.747Z,1509703607.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:48.147Z,1509703608.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:48.177Z,1509703608.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:48.547Z,1509703608.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:48.577Z,1509703608.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:48.946Z,1509703608.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:48.979Z,1509703608.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:49.333Z,1509703609.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:49.350Z,1509703609.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:49.732Z,1509703609.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:49.747Z,1509703609.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:50.132Z,1509703610.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:50.147Z,1509703610.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:50.531Z,1509703610.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:50.546Z,1509703610.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:50.945Z,1509703610.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:50.979Z,1509703610.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:51.345Z,1509703611.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:51.379Z,1509703611.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:51.746Z,1509703611.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:51.777Z,1509703611.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:52.132Z,1509703612.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:52.147Z,1509703612.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:52.532Z,1509703612.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:52.546Z,1509703612.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:52.931Z,1509703612.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:52.947Z,1509703612.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:53.336Z,1509703613.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:53.351Z,1509703613.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:53.732Z,1509703613.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:53.746Z,1509703613.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:54.168Z,1509703614.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:54.219Z,1509703614.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:54.545Z,1509703614.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:54.576Z,1509703614.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:54.944Z,1509703614.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:54.978Z,1509703614.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:55.331Z,1509703615.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:55.347Z,1509703615.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:55.732Z,1509703615.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:55.747Z,1509703615.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:56.133Z,1509703616.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:56.147Z,1509703616.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:56.532Z,1509703616.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:56.547Z,1509703616.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:56.945Z,1509703616.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:56.976Z,1509703616.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:57.345Z,1509703617.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:57.372Z,1509703617.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:57.746Z,1509703617.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:57.777Z,1509703617.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:58.136Z,1509703618.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:58.214Z,1509703618.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:58.537Z,1509703618.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:58.552Z,1509703618.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:58.942Z,1509703618.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:58.991Z,1509703618.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:59.341Z,1509703619.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:59.356Z,1509703619.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:06:59.742Z,1509703619.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:06:59.783Z,1509703619.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:00.149Z,1509703620.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:00.195Z,1509703620.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:00.545Z,1509703620.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:00.561Z,1509703620.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:00.949Z,1509703620.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:00.986Z,1509703620.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:01.342Z,1509703621.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:01.363Z,1509703621.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:01.741Z,1509703621.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:01.756Z,1509703621.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:02.143Z,1509703622.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:02.158Z,1509703622.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:02.542Z,1509703622.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:02.557Z,1509703622.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:02.945Z,1509703622.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:02.961Z,1509703622.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:03.349Z,1509703623.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:03.364Z,1509703623.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:03.746Z,1509703623.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:03.761Z,1509703623.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:04.142Z,1509703624.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:04.157Z,1509703624.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:04.539Z,1509703624.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:04.554Z,1509703624.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:04.942Z,1509703624.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:04.963Z,1509703624.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:05.341Z,1509703625.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:05.356Z,1509703625.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:05.743Z,1509703625.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:05.757Z,1509703625.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:06.150Z,1509703626.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:06.165Z,1509703626.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:06.546Z,1509703626.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:06.561Z,1509703626.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:06.949Z,1509703626.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:06.964Z,1509703626.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:07.343Z,1509703627.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:07.363Z,1509703627.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:07.741Z,1509703627.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:07.756Z,1509703627.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:08.143Z,1509703628.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:08.158Z,1509703628.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:08.542Z,1509703628.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:08.557Z,1509703628.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:08.945Z,1509703628.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:08.963Z,1509703628.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:09.344Z,1509703629.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:09.359Z,1509703629.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:09.746Z,1509703629.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:09.761Z,1509703629.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:10.142Z,1509703630.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:10.163Z,1509703630.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:10.543Z,1509703630.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:10.562Z,1509703630.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:10.943Z,1509703630.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:10.963Z,1509703630.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:11.341Z,1509703631.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:11.356Z,1509703631.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:11.741Z,1509703631.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:11.756Z,1509703631.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:12.149Z,1509703632.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:12.230Z,1509703632.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:12.552Z,1509703632.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:12.567Z,1509703632.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:15.651Z,1509703635.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:15.698Z,1509703635.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:15.819Z,1509703635.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:15.854Z,1509703635.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:16.222Z,1509703636.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:16.290Z,1509703636.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:16.623Z,1509703636.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:16.671Z,1509703636.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:17.041Z,1509703637.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:17.063Z,1509703637.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:17.441Z,1509703637.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:17.456Z,1509703637.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:17.841Z,1509703637.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:17.856Z,1509703637.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:18.223Z,1509703638.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:18.248Z,1509703638.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:18.620Z,1509703638.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:18.652Z,1509703638.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:19.022Z,1509703639.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:19.053Z,1509703639.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:19.424Z,1509703639.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:19.453Z,1509703639.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:19.820Z,1509703639.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:19.847Z,1509703639.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:20.228Z,1509703640.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:20.257Z,1509703640.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:20.645Z,1509703640.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:20.660Z,1509703640.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:21.034Z,1509703641.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:21.063Z,1509703641.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:21.423Z,1509703641.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:21.457Z,1509703641.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:21.816Z,1509703641.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:21.832Z,1509703641.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:22.223Z,1509703642.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:22.252Z,1509703642.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:22.620Z,1509703642.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:22.635Z,1509703642.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:23.034Z,1509703643.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:23.066Z,1509703643.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:23.434Z,1509703643.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:23.458Z,1509703643.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:23.833Z,1509703643.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:23.866Z,1509703643.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:24.223Z,1509703644.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:24.259Z,1509703644.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:24.623Z,1509703644.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:24.643Z,1509703644.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:25.019Z,1509703645.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:25.034Z,1509703645.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:25.420Z,1509703645.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:25.436Z,1509703645.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:25.821Z,1509703645.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:25.836Z,1509703645.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:26.233Z,1509703646.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:26.270Z,1509703646.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:26.634Z,1509703646.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:26.663Z,1509703646.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:27.034Z,1509703647.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:27.065Z,1509703647.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:27.419Z,1509703647.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:27.434Z,1509703647.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:27.871Z,1509703647.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:27.928Z,1509703647.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:28.224Z,1509703648.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:28.239Z,1509703648.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:28.624Z,1509703648.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:28.690Z,1509703648.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:29.034Z,1509703649.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:29.088Z,1509703649.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:29.437Z,1509703649.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:29.468Z,1509703649.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:29.837Z,1509703649.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:29.886Z,1509703649.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:30.227Z,1509703650.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:30.247Z,1509703650.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:30.624Z,1509703650.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:30.675Z,1509703650.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:31.024Z,1509703651.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:31.074Z,1509703651.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:31.426Z,1509703651.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:31.441Z,1509703651.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:31.827Z,1509703651.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:31.847Z,1509703651.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:32.233Z,1509703652.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:32.264Z,1509703652.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:32.638Z,1509703652.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:32.669Z,1509703652.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:33.041Z,1509703653.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:33.065Z,1509703653.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:33.425Z,1509703653.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:33.440Z,1509703653.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:33.837Z,1509703653.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:33.873Z,1509703653.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:34.226Z,1509703654.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:34.241Z,1509703654.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:34.626Z,1509703654.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:34.640Z,1509703654.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:35.039Z,1509703655.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:35.071Z,1509703655.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:35.439Z,1509703655.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:35.472Z,1509703655.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:35.839Z,1509703655.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:35.873Z,1509703655.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:36.224Z,1509703656.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:36.241Z,1509703656.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:36.623Z,1509703656.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:36.640Z,1509703656.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:37.023Z,1509703657.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:37.039Z,1509703657.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:37.424Z,1509703657.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:37.440Z,1509703657.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:37.823Z,1509703657.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:37.839Z,1509703657.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:38.237Z,1509703658.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:38.272Z,1509703658.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:38.638Z,1509703658.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:38.669Z,1509703658.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:39.034Z,1509703659.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:39.049Z,1509703659.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:39.427Z,1509703659.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:39.442Z,1509703659.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:39.826Z,1509703659.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:39.924Z,1509703659.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:40.228Z,1509703660.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:40.243Z,1509703660.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:40.627Z,1509703660.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:40.642Z,1509703660.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:41.041Z,1509703661.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:41.073Z,1509703661.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:41.430Z,1509703661.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:41.445Z,1509703661.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:41.841Z,1509703661.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:41.874Z,1509703661.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:42.228Z,1509703662.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:42.243Z,1509703662.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:42.627Z,1509703662.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:42.642Z,1509703662.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:43.027Z,1509703663.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:43.094Z,1509703663.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:43.424Z,1509703663.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:43.490Z,1509703663.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:43.827Z,1509703663.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:43.842Z,1509703663.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:44.236Z,1509703664.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:44.290Z,1509703664.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:44.638Z,1509703664.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:44.653Z,1509703664.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:45.035Z,1509703665.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:45.090Z,1509703665.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:45.428Z,1509703665.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:45.479Z,1509703665.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:45.836Z,1509703665.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:45.859Z,1509703665.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:46.229Z,1509703666.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:46.244Z,1509703666.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:46.631Z,1509703666.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:46.645Z,1509703666.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:47.036Z,1509703667.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:47.051Z,1509703667.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:47.437Z,1509703667.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:47.453Z,1509703667.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:47.836Z,1509703667.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:47.858Z,1509703667.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:48.230Z,1509703668.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:48.251Z,1509703668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:48.628Z,1509703668.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:48.643Z,1509703668.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:49.030Z,1509703669.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:49.045Z,1509703669.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:49.431Z,1509703669.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:49.446Z,1509703669.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:49.828Z,1509703669.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:49.843Z,1509703669.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:50.236Z,1509703670.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:50.258Z,1509703670.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:50.638Z,1509703670.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:50.653Z,1509703670.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:51.036Z,1509703671.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:51.051Z,1509703671.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:51.430Z,1509703671.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:51.445Z,1509703671.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:51.815Z,1509703671.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:51.846Z,1509703671.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:52.229Z,1509703672.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:52.244Z,1509703672.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:52.631Z,1509703672.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:52.646Z,1509703672.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:53.040Z,1509703673.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:53.056Z,1509703673.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:53.440Z,1509703673.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:53.463Z,1509703673.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:53.840Z,1509703673.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:53.862Z,1509703673.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:54.230Z,1509703674.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:54.251Z,1509703674.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:54.628Z,1509703674.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:54.643Z,1509703674.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:55.029Z,1509703675.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:55.045Z,1509703675.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:55.431Z,1509703675.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:55.451Z,1509703675.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:55.828Z,1509703675.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:55.843Z,1509703675.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:56.241Z,1509703676.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:56.255Z,1509703676.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:56.639Z,1509703676.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:56.659Z,1509703676.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:57.039Z,1509703677.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:57.059Z,1509703677.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:57.431Z,1509703677.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:57.499Z,1509703677.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:57.823Z,1509703677.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:57.855Z,1509703677.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:58.221Z,1509703678.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:58.289Z,1509703678.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:58.616Z,1509703678.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:58.650Z,1509703678.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:59.041Z,1509703679.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:59.098Z,1509703679.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:59.441Z,1509703679.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:59.456Z,1509703679.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:07:59.842Z,1509703679.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:07:59.898Z,1509703679.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:00.216Z,1509703680.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:00.250Z,1509703680.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:00.620Z,1509703680.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:00.651Z,1509703680.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:01.023Z,1509703681.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:01.058Z,1509703681.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:01.423Z,1509703681.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:01.455Z,1509703681.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:01.820Z,1509703681.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:01.835Z,1509703681.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:02.234Z,1509703682.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:02.259Z,1509703682.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:02.634Z,1509703682.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:02.658Z,1509703682.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:03.038Z,1509703683.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:03.071Z,1509703683.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:03.423Z,1509703683.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:03.459Z,1509703683.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:03.819Z,1509703683.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:03.835Z,1509703683.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:04.220Z,1509703684.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:04.235Z,1509703684.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:04.619Z,1509703684.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:04.635Z,1509703684.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:05.034Z,1509703685.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:05.064Z,1509703685.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:05.442Z,1509703685.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:05.465Z,1509703685.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:05.838Z,1509703685.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:05.861Z,1509703685.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:06.220Z,1509703686.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:06.235Z,1509703686.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:06.627Z,1509703686.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:06.665Z,1509703686.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:07.027Z,1509703687.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:07.066Z,1509703687.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:07.428Z,1509703687.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:07.443Z,1509703687.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:07.824Z,1509703687.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:07.839Z,1509703687.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:08.238Z,1509703688.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:08.262Z,1509703688.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:08.642Z,1509703688.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:08.670Z,1509703688.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:09.038Z,1509703689.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:09.067Z,1509703689.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:09.427Z,1509703689.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:09.463Z,1509703689.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:09.821Z,1509703689.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:09.836Z,1509703689.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:10.225Z,1509703690.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:10.240Z,1509703690.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:10.627Z,1509703690.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:10.643Z,1509703690.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:11.038Z,1509703691.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:11.068Z,1509703691.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:11.438Z,1509703691.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:11.469Z,1509703691.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:11.842Z,1509703691.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:11.927Z,1509703691.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:11.935Z,1509703691.935 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T10:03:11.9Z
2017-11-03T10:08:11.935Z,1509703691.935 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T10:08:11.935Z,1509703691.935 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T10:08:12.226Z,1509703692.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:12.242Z,1509703692.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:12.742Z,1509703692.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:12.794Z,1509703692.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:15.796Z,1509703695.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:15.818Z,1509703695.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:15.925Z,1509703695.925 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0232.lzma
2017-11-03T10:08:15.945Z,1509703695.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:16.022Z,1509703696.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:16.366Z,1509703696.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:16.426Z,1509703696.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:16.727Z,1509703696.727 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0232.lzma.bak
2017-11-03T10:08:16.728Z,1509703696.728 [DataOverHttps](INFO): SBD MOMSN=5183303
2017-11-03T10:08:16.777Z,1509703696.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:16.792Z,1509703696.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:17.374Z,1509703697.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:17.389Z,1509703697.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:17.544Z,1509703697.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:17.587Z,1509703697.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:20.672Z,1509703700.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:20.723Z,1509703700.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:20.871Z,1509703700.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:20.887Z,1509703700.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:21.273Z,1509703701.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:21.289Z,1509703701.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:21.685Z,1509703701.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:21.718Z,1509703701.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:22.074Z,1509703702.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:22.089Z,1509703702.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:22.470Z,1509703702.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:22.491Z,1509703702.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:25.567Z,1509703705.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:25.587Z,1509703705.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:25.681Z,1509703705.681 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20171103T001125/Express0233.lzma
2017-11-03T10:08:25.718Z,1509703705.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:25.738Z,1509703705.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:26.121Z,1509703706.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:26.137Z,1509703706.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:26.483Z,1509703706.483 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0233.lzma.bak
2017-11-03T10:08:26.483Z,1509703706.483 [DataOverHttps](INFO): SBD MOMSN=5183305
2017-11-03T10:08:26.528Z,1509703706.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:26.559Z,1509703706.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:27.126Z,1509703707.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:27.141Z,1509703707.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:27.144Z,1509703707.144 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T10:08:27.145Z,1509703707.145 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T10:08:27.145Z,1509703707.145 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T10:08:27.313Z,1509703707.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:27.335Z,1509703707.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:30.422Z,1509703710.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:30.499Z,1509703710.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:30.644Z,1509703710.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:30.679Z,1509703710.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:31.061Z,1509703711.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:31.076Z,1509703711.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:31.469Z,1509703711.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:31.518Z,1509703711.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:31.865Z,1509703711.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:31.880Z,1509703711.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:32.247Z,1509703712.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:32.303Z,1509703712.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:32.646Z,1509703712.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:32.672Z,1509703712.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:33.040Z,1509703713.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:33.080Z,1509703713.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:33.445Z,1509703713.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:33.472Z,1509703713.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:33.844Z,1509703713.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:33.878Z,1509703713.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:34.265Z,1509703714.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:34.281Z,1509703714.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:34.665Z,1509703714.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:34.680Z,1509703714.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:35.064Z,1509703715.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:35.086Z,1509703715.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:35.447Z,1509703715.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:35.472Z,1509703715.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:35.847Z,1509703715.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:35.872Z,1509703715.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:36.248Z,1509703716.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:36.273Z,1509703716.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:36.647Z,1509703716.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:36.672Z,1509703716.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:37.063Z,1509703717.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:37.082Z,1509703717.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:37.469Z,1509703717.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:37.484Z,1509703717.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:37.861Z,1509703717.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:37.876Z,1509703717.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:38.244Z,1509703718.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:38.276Z,1509703718.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:38.644Z,1509703718.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:38.675Z,1509703718.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:39.041Z,1509703719.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:39.056Z,1509703719.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:39.452Z,1509703719.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:39.467Z,1509703719.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:39.852Z,1509703719.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:39.867Z,1509703719.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:40.258Z,1509703720.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:40.273Z,1509703720.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:40.657Z,1509703720.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:40.673Z,1509703720.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:41.057Z,1509703721.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:41.073Z,1509703721.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:41.447Z,1509703721.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:41.462Z,1509703721.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:41.847Z,1509703721.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:41.862Z,1509703721.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:42.244Z,1509703722.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:42.259Z,1509703722.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:42.647Z,1509703722.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:42.667Z,1509703722.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:43.057Z,1509703723.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:43.073Z,1509703723.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:43.477Z,1509703723.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:43.493Z,1509703723.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:43.858Z,1509703723.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:43.873Z,1509703723.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:44.245Z,1509703724.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:44.260Z,1509703724.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:44.644Z,1509703724.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:44.659Z,1509703724.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:45.047Z,1509703725.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:45.087Z,1509703725.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:45.445Z,1509703725.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:45.490Z,1509703725.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:45.844Z,1509703725.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:45.860Z,1509703725.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:46.254Z,1509703726.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:46.269Z,1509703726.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:46.661Z,1509703726.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:46.707Z,1509703726.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:47.054Z,1509703727.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:47.079Z,1509703727.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:47.443Z,1509703727.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:47.495Z,1509703727.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:47.843Z,1509703727.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:47.891Z,1509703727.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:48.244Z,1509703728.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:48.278Z,1509703728.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:48.647Z,1509703728.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:48.677Z,1509703728.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:49.065Z,1509703729.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:49.081Z,1509703729.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:49.471Z,1509703729.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:49.486Z,1509703729.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:49.865Z,1509703729.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:49.880Z,1509703729.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:50.247Z,1509703730.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:50.301Z,1509703730.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:50.644Z,1509703730.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:50.679Z,1509703730.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:51.041Z,1509703731.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:51.056Z,1509703731.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:51.446Z,1509703731.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:51.477Z,1509703731.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:51.848Z,1509703731.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:51.863Z,1509703731.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:52.258Z,1509703732.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:52.289Z,1509703732.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:52.665Z,1509703732.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:52.695Z,1509703732.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:53.058Z,1509703733.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:53.089Z,1509703733.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:53.446Z,1509703733.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:53.461Z,1509703733.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:53.845Z,1509703733.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:53.861Z,1509703733.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:54.244Z,1509703734.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:54.261Z,1509703734.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:54.644Z,1509703734.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:54.661Z,1509703734.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:55.058Z,1509703735.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:55.093Z,1509703735.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:55.458Z,1509703735.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:55.489Z,1509703735.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:55.858Z,1509703735.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:55.889Z,1509703735.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:56.245Z,1509703736.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:56.261Z,1509703736.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:56.643Z,1509703736.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:56.659Z,1509703736.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:57.044Z,1509703737.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:57.059Z,1509703737.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:57.444Z,1509703737.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:57.460Z,1509703737.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:57.843Z,1509703737.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:57.858Z,1509703737.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:58.258Z,1509703738.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:58.289Z,1509703738.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:58.661Z,1509703738.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:58.687Z,1509703738.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:59.056Z,1509703739.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:59.090Z,1509703739.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:59.444Z,1509703739.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:59.459Z,1509703739.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:08:59.843Z,1509703739.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:08:59.911Z,1509703739.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:00.252Z,1509703740.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:00.266Z,1509703740.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:00.652Z,1509703740.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:00.667Z,1509703740.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:01.065Z,1509703741.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:01.114Z,1509703741.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:01.465Z,1509703741.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:01.495Z,1509703741.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:01.865Z,1509703741.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:01.911Z,1509703741.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:02.251Z,1509703742.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:02.298Z,1509703742.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:02.648Z,1509703742.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:02.663Z,1509703742.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:03.046Z,1509703743.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:03.069Z,1509703743.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:03.455Z,1509703743.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:03.470Z,1509703743.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:03.839Z,1509703743.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:03.871Z,1509703743.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:04.261Z,1509703744.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:04.276Z,1509703744.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:04.663Z,1509703744.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:04.683Z,1509703744.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:05.057Z,1509703745.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:05.072Z,1509703745.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:05.449Z,1509703745.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:05.464Z,1509703745.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:05.854Z,1509703745.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:05.875Z,1509703745.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:06.255Z,1509703746.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:06.270Z,1509703746.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:06.654Z,1509703746.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:06.675Z,1509703746.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:07.063Z,1509703747.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:07.083Z,1509703747.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:07.460Z,1509703747.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:07.482Z,1509703747.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:07.860Z,1509703747.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:07.875Z,1509703747.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:08.252Z,1509703748.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:08.267Z,1509703748.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:08.649Z,1509703748.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:08.664Z,1509703748.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:09.054Z,1509703749.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:09.071Z,1509703749.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:09.451Z,1509703749.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:09.471Z,1509703749.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:09.855Z,1509703749.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:09.869Z,1509703749.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:10.264Z,1509703750.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:10.279Z,1509703750.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:10.663Z,1509703750.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:10.679Z,1509703750.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:11.064Z,1509703751.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:11.086Z,1509703751.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:11.452Z,1509703751.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:11.467Z,1509703751.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:11.852Z,1509703751.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:11.867Z,1509703751.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:12.256Z,1509703752.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:12.271Z,1509703752.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:12.652Z,1509703752.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:12.675Z,1509703752.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:13.064Z,1509703753.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:13.079Z,1509703753.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:13.464Z,1509703753.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:13.486Z,1509703753.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:13.863Z,1509703753.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:13.883Z,1509703753.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:14.252Z,1509703754.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:14.310Z,1509703754.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:14.655Z,1509703754.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:14.687Z,1509703754.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:15.045Z,1509703755.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:15.070Z,1509703755.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:15.447Z,1509703755.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:15.508Z,1509703755.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:15.847Z,1509703755.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:15.871Z,1509703755.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:16.265Z,1509703756.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:16.318Z,1509703756.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:16.668Z,1509703756.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:16.719Z,1509703756.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:17.065Z,1509703757.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:17.079Z,1509703757.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:17.473Z,1509703757.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:17.488Z,1509703757.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:17.845Z,1509703757.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:17.877Z,1509703757.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:18.247Z,1509703758.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:18.272Z,1509703758.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:18.645Z,1509703758.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:18.670Z,1509703758.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:19.069Z,1509703759.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:19.092Z,1509703759.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:19.461Z,1509703759.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:19.482Z,1509703759.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:19.865Z,1509703759.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:19.880Z,1509703759.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:20.247Z,1509703760.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:20.272Z,1509703760.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:20.640Z,1509703760.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:20.669Z,1509703760.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:21.045Z,1509703761.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:21.070Z,1509703761.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:21.445Z,1509703761.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:21.475Z,1509703761.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:21.847Z,1509703761.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:21.872Z,1509703761.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:22.265Z,1509703762.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:22.281Z,1509703762.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:22.665Z,1509703762.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:22.680Z,1509703762.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:23.065Z,1509703763.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:23.080Z,1509703763.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:23.445Z,1509703763.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:23.470Z,1509703763.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:23.845Z,1509703763.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:23.874Z,1509703763.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:24.247Z,1509703764.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:24.273Z,1509703764.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:24.645Z,1509703764.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:24.670Z,1509703764.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:25.065Z,1509703765.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:25.080Z,1509703765.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:25.080Z,1509703765.080 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 198
2017-11-03T10:09:25.080Z,1509703765.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:09:25.082Z,1509703765.082 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:25.082Z,1509703765.082 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 198
2017-11-03T10:09:25.082Z,1509703765.082 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:09:25.084Z,1509703765.084 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:25.085Z,1509703765.085 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 198
2017-11-03T10:09:25.085Z,1509703765.085 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:09:25.165Z,1509703765.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:09:25.165Z,1509703765.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:09:25.165Z,1509703765.165 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:09:25.457Z,1509703765.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:25.576Z,1509703765.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:09:25.576Z,1509703765.576 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 198
2017-11-03T10:09:25.577Z,1509703765.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:09:25.577Z,1509703765.577 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 198
2017-11-03T10:09:25.577Z,1509703765.577 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:09:25.577Z,1509703765.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 198
2017-11-03T10:09:25.858Z,1509703765.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:25.882Z,1509703765.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:09:25.882Z,1509703765.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:09:25.882Z,1509703765.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:09:25.883Z,1509703765.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:09:25.883Z,1509703765.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:09:25.883Z,1509703765.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:09:25.884Z,1509703765.884 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:09:25.884Z,1509703765.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:09:25.885Z,1509703765.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:09:26.254Z,1509703766.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:26.290Z,1509703766.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:09:26.291Z,1509703766.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:26.648Z,1509703766.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:26.662Z,1509703766.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:09:26.663Z,1509703766.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:27.049Z,1509703767.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:27.063Z,1509703767.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:09:27.065Z,1509703767.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:27.450Z,1509703767.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:27.465Z,1509703767.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:09:27.466Z,1509703767.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:27.855Z,1509703767.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:27.870Z,1509703767.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:09:27.871Z,1509703767.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:30.970Z,1509703770.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:31.065Z,1509703771.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:09:31.066Z,1509703771.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:31.222Z,1509703771.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:31.243Z,1509703771.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T10:09:31.244Z,1509703771.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:31.619Z,1509703771.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:31.658Z,1509703771.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T10:09:31.659Z,1509703771.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:32.006Z,1509703772.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:32.021Z,1509703772.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T10:09:32.022Z,1509703772.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:32.407Z,1509703772.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:32.466Z,1509703772.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T10:09:32.467Z,1509703772.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:32.800Z,1509703772.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:32.839Z,1509703772.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T10:09:32.840Z,1509703772.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:33.212Z,1509703773.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:33.244Z,1509703773.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T10:09:33.245Z,1509703773.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:33.611Z,1509703773.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:33.646Z,1509703773.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T10:09:33.647Z,1509703773.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:34.016Z,1509703774.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:34.046Z,1509703774.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T10:09:34.047Z,1509703774.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:34.404Z,1509703774.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:34.419Z,1509703774.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-03T10:09:34.420Z,1509703774.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:34.804Z,1509703774.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:34.821Z,1509703774.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-03T10:09:34.822Z,1509703774.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:35.203Z,1509703775.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:35.222Z,1509703775.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-03T10:09:35.223Z,1509703775.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:35.603Z,1509703775.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:35.618Z,1509703775.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T10:09:35.619Z,1509703775.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:36.017Z,1509703776.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:36.045Z,1509703776.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-03T10:09:36.046Z,1509703776.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:36.407Z,1509703776.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:36.422Z,1509703776.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T10:09:36.423Z,1509703776.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:36.813Z,1509703776.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:36.828Z,1509703776.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-03T10:09:36.848Z,1509703776.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:37.206Z,1509703777.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:37.221Z,1509703777.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T10:09:37.222Z,1509703777.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:37.600Z,1509703777.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:37.626Z,1509703777.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-03T10:09:37.627Z,1509703777.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:38.004Z,1509703778.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:38.021Z,1509703778.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-03T10:09:38.022Z,1509703778.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:38.405Z,1509703778.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:38.420Z,1509703778.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-03T10:09:38.421Z,1509703778.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:38.801Z,1509703778.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:38.826Z,1509703778.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-03T10:09:38.827Z,1509703778.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:39.218Z,1509703779.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:39.244Z,1509703779.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T10:09:39.245Z,1509703779.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:39.611Z,1509703779.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:39.644Z,1509703779.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T10:09:39.645Z,1509703779.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:40.018Z,1509703780.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:40.046Z,1509703780.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T10:09:40.047Z,1509703780.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:40.407Z,1509703780.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:40.422Z,1509703780.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-03T10:09:40.423Z,1509703780.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:40.804Z,1509703780.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:40.819Z,1509703780.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T10:09:40.820Z,1509703780.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:41.207Z,1509703781.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:41.223Z,1509703781.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-03T10:09:41.224Z,1509703781.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:41.605Z,1509703781.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:41.620Z,1509703781.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-03T10:09:41.621Z,1509703781.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:42.010Z,1509703782.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:42.025Z,1509703782.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-03T10:09:42.026Z,1509703782.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:42.416Z,1509703782.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:42.444Z,1509703782.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T10:09:42.445Z,1509703782.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:42.813Z,1509703782.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:42.846Z,1509703782.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T10:09:42.847Z,1509703782.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:43.206Z,1509703783.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:43.221Z,1509703783.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T10:09:43.222Z,1509703783.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:43.606Z,1509703783.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:43.630Z,1509703783.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T10:09:43.631Z,1509703783.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:44.007Z,1509703784.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:44.026Z,1509703784.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T10:09:44.027Z,1509703784.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:44.407Z,1509703784.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:44.423Z,1509703784.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T10:09:44.425Z,1509703784.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:44.813Z,1509703784.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:44.827Z,1509703784.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T10:09:44.828Z,1509703784.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:45.215Z,1509703785.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:45.270Z,1509703785.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:45.617Z,1509703785.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:45.632Z,1509703785.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:46.018Z,1509703786.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:46.032Z,1509703786.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:46.402Z,1509703786.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:46.424Z,1509703786.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:46.807Z,1509703786.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:46.822Z,1509703786.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:47.207Z,1509703787.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:47.226Z,1509703787.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:47.606Z,1509703787.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:47.624Z,1509703787.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:48.020Z,1509703788.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:48.029Z,1509703788.029 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:09:48.029Z,1509703788.029 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:09:48.029Z,1509703788.029 [BPC1](ERROR): Communications Fault
2017-11-03T10:09:48.037Z,1509703788.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:48.133Z,1509703788.133 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:09:48.421Z,1509703788.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:48.443Z,1509703788.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:48.815Z,1509703788.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:48.839Z,1509703788.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:49.197Z,1509703789.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:49.236Z,1509703789.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:49.321Z,1509703789.321 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:09:49.321Z,1509703789.321 [BPC1] No Fault, FailCount= 1
2017-11-03T10:09:49.602Z,1509703789.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:49.683Z,1509703789.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:50.002Z,1509703790.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:50.029Z,1509703790.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:50.399Z,1509703790.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:50.425Z,1509703790.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:50.792Z,1509703790.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:50.830Z,1509703790.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:51.219Z,1509703791.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:51.239Z,1509703791.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:51.618Z,1509703791.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:51.673Z,1509703791.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:52.017Z,1509703792.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:52.038Z,1509703792.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:52.399Z,1509703792.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:52.431Z,1509703792.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:52.798Z,1509703792.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:52.825Z,1509703792.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:53.195Z,1509703793.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:53.225Z,1509703793.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:53.599Z,1509703793.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:53.624Z,1509703793.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:54.020Z,1509703794.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:54.035Z,1509703794.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:54.419Z,1509703794.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:54.438Z,1509703794.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:54.806Z,1509703794.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:54.843Z,1509703794.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:55.198Z,1509703795.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:55.233Z,1509703795.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:55.592Z,1509703795.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:55.631Z,1509703795.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:55.998Z,1509703795.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:56.030Z,1509703796.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:56.399Z,1509703796.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:56.414Z,1509703796.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:56.798Z,1509703796.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:56.813Z,1509703796.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:57.211Z,1509703797.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:57.237Z,1509703797.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:57.611Z,1509703797.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:57.636Z,1509703797.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:58.009Z,1509703798.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:58.042Z,1509703798.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:58.398Z,1509703798.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:58.413Z,1509703798.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:58.796Z,1509703798.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:58.839Z,1509703798.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:58.929Z,1509703798.929 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:09:58.930Z,1509703798.930 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T10:09:59.171Z,1509703799.171 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:09:59.172Z,1509703799.172 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:09:59.172Z,1509703799.172 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:09:59.172Z,1509703799.172 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:09:59.203Z,1509703799.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:59.238Z,1509703799.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:09:59.598Z,1509703799.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:09:59.613Z,1509703799.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:00.013Z,1509703800.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:00.038Z,1509703800.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:00.411Z,1509703800.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:00.440Z,1509703800.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:00.813Z,1509703800.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:00.839Z,1509703800.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:01.198Z,1509703801.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:01.213Z,1509703801.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:01.599Z,1509703801.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:01.618Z,1509703801.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:01.995Z,1509703801.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:02.066Z,1509703802.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:02.406Z,1509703802.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:02.437Z,1509703802.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:02.797Z,1509703802.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:02.815Z,1509703802.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:03.239Z,1509703803.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:03.292Z,1509703803.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:03.403Z,1509703803.403 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:10:03.463Z,1509703803.463 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:10:03.464Z,1509703803.464 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:10:03.465Z,1509703803.465 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:10:03.466Z,1509703803.466 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:10:03.628Z,1509703803.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:03.696Z,1509703803.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:04.016Z,1509703804.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:04.041Z,1509703804.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:04.400Z,1509703804.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:04.459Z,1509703804.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:04.806Z,1509703804.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:04.855Z,1509703804.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:05.213Z,1509703805.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:05.238Z,1509703805.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:05.599Z,1509703805.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:05.617Z,1509703805.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:06.014Z,1509703806.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:06.044Z,1509703806.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:06.413Z,1509703806.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:06.445Z,1509703806.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:06.815Z,1509703806.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:06.844Z,1509703806.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:07.205Z,1509703807.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:07.221Z,1509703807.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:07.603Z,1509703807.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:07.619Z,1509703807.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:08.003Z,1509703808.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:08.023Z,1509703808.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:08.400Z,1509703808.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:08.443Z,1509703808.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:08.802Z,1509703808.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:08.808Z,1509703808.808 [PNI_TCM](ERROR): CRC does not match. Expected:0x52709 got:0x7530
2017-11-03T10:10:08.846Z,1509703808.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:09.213Z,1509703809.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:09.244Z,1509703809.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:09.613Z,1509703809.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:09.645Z,1509703809.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:10.016Z,1509703810.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:10.047Z,1509703810.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:10.434Z,1509703810.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:10.508Z,1509703810.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:10.806Z,1509703810.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:10.827Z,1509703810.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:11.207Z,1509703811.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:11.223Z,1509703811.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:11.608Z,1509703811.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:11.625Z,1509703811.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:12.012Z,1509703812.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:12.027Z,1509703812.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:12.414Z,1509703812.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:12.429Z,1509703812.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:12.814Z,1509703812.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:12.829Z,1509703812.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:13.206Z,1509703813.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:13.223Z,1509703813.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:13.650Z,1509703813.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:13.702Z,1509703813.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:14.010Z,1509703814.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:14.025Z,1509703814.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:14.406Z,1509703814.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:14.427Z,1509703814.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:14.806Z,1509703814.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:14.823Z,1509703814.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:15.210Z,1509703815.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:15.231Z,1509703815.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:15.652Z,1509703815.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:15.721Z,1509703815.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:16.009Z,1509703816.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:16.025Z,1509703816.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:16.408Z,1509703816.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:16.425Z,1509703816.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:16.807Z,1509703816.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:16.822Z,1509703816.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:17.204Z,1509703817.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:17.219Z,1509703817.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:17.659Z,1509703817.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:17.678Z,1509703817.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:18.010Z,1509703818.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:18.026Z,1509703818.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:18.411Z,1509703818.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:18.431Z,1509703818.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:18.810Z,1509703818.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:18.827Z,1509703818.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:19.205Z,1509703819.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:19.220Z,1509703819.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:19.659Z,1509703819.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:19.701Z,1509703819.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:20.009Z,1509703820.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:20.018Z,1509703820.018 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:10:20.018Z,1509703820.018 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:10:20.018Z,1509703820.018 [BPC1](ERROR): Communications Fault
2017-11-03T10:10:20.026Z,1509703820.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:20.125Z,1509703820.125 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:10:20.411Z,1509703820.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:20.431Z,1509703820.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:20.804Z,1509703820.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:20.824Z,1509703820.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:21.213Z,1509703821.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:21.228Z,1509703821.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:21.321Z,1509703821.321 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:10:21.321Z,1509703821.321 [BPC1] No Fault, FailCount= 1
2017-11-03T10:10:21.614Z,1509703821.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:21.750Z,1509703821.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:22.014Z,1509703822.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:22.029Z,1509703822.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:22.407Z,1509703822.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:22.423Z,1509703822.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:22.806Z,1509703822.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:22.824Z,1509703822.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:23.211Z,1509703823.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:23.226Z,1509703823.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:23.606Z,1509703823.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:23.631Z,1509703823.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:24.025Z,1509703824.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:24.061Z,1509703824.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:24.416Z,1509703824.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:24.430Z,1509703824.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:24.818Z,1509703824.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:24.834Z,1509703824.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:25.212Z,1509703825.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:25.227Z,1509703825.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:25.610Z,1509703825.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:25.625Z,1509703825.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:26.007Z,1509703826.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:26.066Z,1509703826.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:26.401Z,1509703826.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:26.433Z,1509703826.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:26.796Z,1509703826.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:26.831Z,1509703826.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:27.210Z,1509703827.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:27.239Z,1509703827.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:27.619Z,1509703827.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:27.641Z,1509703827.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:28.022Z,1509703828.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:28.039Z,1509703828.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:31.184Z,1509703831.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:31.204Z,1509703831.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:31.347Z,1509703831.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:31.378Z,1509703831.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:31.772Z,1509703831.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:31.787Z,1509703831.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:32.154Z,1509703832.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:32.179Z,1509703832.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:32.550Z,1509703832.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:32.581Z,1509703832.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:32.945Z,1509703832.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:32.960Z,1509703832.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:33.342Z,1509703833.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:33.357Z,1509703833.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:33.751Z,1509703833.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:33.783Z,1509703833.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:34.158Z,1509703834.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:34.182Z,1509703834.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:34.558Z,1509703834.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:34.579Z,1509703834.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:34.958Z,1509703834.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:34.981Z,1509703834.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:35.347Z,1509703835.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:35.361Z,1509703835.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:35.749Z,1509703835.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:35.781Z,1509703835.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:36.148Z,1509703836.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:36.164Z,1509703836.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:36.541Z,1509703836.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:36.563Z,1509703836.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:36.958Z,1509703836.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:37.058Z,1509703837.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:37.358Z,1509703837.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:37.389Z,1509703837.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:37.758Z,1509703837.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:37.811Z,1509703837.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:38.150Z,1509703838.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:38.165Z,1509703838.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:38.549Z,1509703838.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:38.599Z,1509703838.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:38.950Z,1509703838.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:39.002Z,1509703839.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:39.351Z,1509703839.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:39.366Z,1509703839.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:39.745Z,1509703839.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:39.762Z,1509703839.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:40.216Z,1509703840.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:40.247Z,1509703840.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:40.563Z,1509703840.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:40.595Z,1509703840.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:40.962Z,1509703840.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:40.995Z,1509703840.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:41.349Z,1509703841.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:41.365Z,1509703841.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:41.745Z,1509703841.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:41.761Z,1509703841.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:42.189Z,1509703842.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:42.247Z,1509703842.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:42.552Z,1509703842.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:42.567Z,1509703842.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:42.952Z,1509703842.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:42.968Z,1509703842.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:43.358Z,1509703843.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:43.373Z,1509703843.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:43.770Z,1509703843.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:43.794Z,1509703843.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:44.150Z,1509703844.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:44.167Z,1509703844.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:44.550Z,1509703844.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:44.566Z,1509703844.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:44.950Z,1509703844.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:44.966Z,1509703844.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:45.350Z,1509703845.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:45.371Z,1509703845.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:45.756Z,1509703845.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:45.772Z,1509703845.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:46.154Z,1509703846.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:46.169Z,1509703846.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:46.558Z,1509703846.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:46.573Z,1509703846.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:46.953Z,1509703846.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:46.968Z,1509703846.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:47.351Z,1509703847.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:47.366Z,1509703847.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:47.750Z,1509703847.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:47.766Z,1509703847.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:48.150Z,1509703848.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:48.166Z,1509703848.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:48.551Z,1509703848.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:48.566Z,1509703848.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:48.954Z,1509703848.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:48.969Z,1509703848.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:49.356Z,1509703849.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:49.371Z,1509703849.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:49.758Z,1509703849.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:49.819Z,1509703849.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:50.145Z,1509703850.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:50.160Z,1509703850.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:50.544Z,1509703850.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:50.595Z,1509703850.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:50.952Z,1509703850.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:50.968Z,1509703850.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:51.351Z,1509703851.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:51.403Z,1509703851.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:51.751Z,1509703851.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:51.810Z,1509703851.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:52.169Z,1509703852.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:52.223Z,1509703852.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:52.563Z,1509703852.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:52.599Z,1509703852.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:52.951Z,1509703852.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:53.002Z,1509703853.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:53.349Z,1509703853.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:53.388Z,1509703853.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:53.757Z,1509703853.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:53.791Z,1509703853.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:54.195Z,1509703854.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:54.262Z,1509703854.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:54.564Z,1509703854.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:54.601Z,1509703854.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:54.989Z,1509703854.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:55.033Z,1509703855.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:55.363Z,1509703855.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:55.405Z,1509703855.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:55.772Z,1509703855.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:55.809Z,1509703855.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:56.181Z,1509703856.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:56.241Z,1509703856.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:56.570Z,1509703856.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:56.596Z,1509703856.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:56.958Z,1509703856.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:56.997Z,1509703856.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:57.352Z,1509703857.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:57.380Z,1509703857.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:57.759Z,1509703857.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:57.782Z,1509703857.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:58.166Z,1509703858.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:58.210Z,1509703858.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:58.564Z,1509703858.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:58.584Z,1509703858.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:58.975Z,1509703858.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:59.016Z,1509703859.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:59.358Z,1509703859.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:59.382Z,1509703859.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:10:59.757Z,1509703859.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:10:59.814Z,1509703859.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:00.168Z,1509703860.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:00.217Z,1509703860.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:00.562Z,1509703860.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:00.587Z,1509703860.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:00.984Z,1509703860.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:01.019Z,1509703861.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:01.370Z,1509703861.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:01.391Z,1509703861.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:01.768Z,1509703861.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:01.784Z,1509703861.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:02.171Z,1509703862.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:02.224Z,1509703862.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:02.574Z,1509703862.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:02.697Z,1509703862.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:02.949Z,1509703862.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:02.986Z,1509703862.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:03.344Z,1509703863.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:03.427Z,1509703863.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:03.779Z,1509703863.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:03.818Z,1509703863.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:04.160Z,1509703864.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:04.237Z,1509703864.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:04.556Z,1509703864.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:04.603Z,1509703864.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:04.974Z,1509703864.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:05.026Z,1509703865.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:05.349Z,1509703865.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:05.394Z,1509703865.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:05.742Z,1509703865.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:05.794Z,1509703865.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:06.157Z,1509703866.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:06.185Z,1509703866.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:06.558Z,1509703866.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:06.577Z,1509703866.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:06.959Z,1509703866.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:06.983Z,1509703866.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:07.370Z,1509703867.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:07.390Z,1509703867.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:07.768Z,1509703867.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:07.801Z,1509703867.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:08.150Z,1509703868.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:08.214Z,1509703868.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:08.545Z,1509703868.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:08.587Z,1509703868.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:08.949Z,1509703868.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:08.997Z,1509703868.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:09.346Z,1509703869.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:09.386Z,1509703869.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:09.755Z,1509703869.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:09.808Z,1509703869.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:10.199Z,1509703870.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:10.255Z,1509703870.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:10.574Z,1509703870.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:10.650Z,1509703870.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:10.971Z,1509703870.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:11.018Z,1509703871.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:11.358Z,1509703871.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:11.401Z,1509703871.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:11.767Z,1509703871.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:11.800Z,1509703871.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:12.153Z,1509703872.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:12.168Z,1509703872.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:12.553Z,1509703872.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:12.569Z,1509703872.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:12.957Z,1509703872.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:12.972Z,1509703872.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:13.357Z,1509703873.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:13.398Z,1509703873.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:13.758Z,1509703873.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:13.773Z,1509703873.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:14.143Z,1509703874.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:14.167Z,1509703874.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:14.560Z,1509703874.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:14.578Z,1509703874.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:14.938Z,1509703874.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:14.959Z,1509703874.959 [BPC1](ERROR): Failed to parse message.
2017-11-03T10:11:14.959Z,1509703874.959 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:11:14.959Z,1509703874.959 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:11:14.959Z,1509703874.959 [BPC1](ERROR): Data Fault
2017-11-03T10:11:14.968Z,1509703874.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:15.065Z,1509703875.065 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:11:15.351Z,1509703875.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:15.367Z,1509703875.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:15.760Z,1509703875.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:15.775Z,1509703875.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:16.162Z,1509703876.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:16.183Z,1509703876.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:16.277Z,1509703876.277 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:11:16.277Z,1509703876.277 [BPC1] No Fault, FailCount= 1
2017-11-03T10:11:16.563Z,1509703876.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:16.631Z,1509703876.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:16.966Z,1509703876.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:16.981Z,1509703876.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:17.337Z,1509703877.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:17.405Z,1509703877.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:17.750Z,1509703877.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:17.783Z,1509703877.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:18.154Z,1509703878.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:18.171Z,1509703878.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:18.544Z,1509703878.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:18.606Z,1509703878.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:18.963Z,1509703878.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:18.983Z,1509703878.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:19.366Z,1509703879.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:19.391Z,1509703879.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:19.762Z,1509703879.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:19.779Z,1509703879.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:20.142Z,1509703880.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:20.169Z,1509703880.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:20.542Z,1509703880.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:20.569Z,1509703880.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:20.942Z,1509703880.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:20.969Z,1509703880.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:21.338Z,1509703881.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:21.370Z,1509703881.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:21.736Z,1509703881.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:21.751Z,1509703881.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:22.234Z,1509703882.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:22.249Z,1509703882.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:22.566Z,1509703882.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:22.582Z,1509703882.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:22.953Z,1509703882.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:22.978Z,1509703882.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:23.336Z,1509703883.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:23.351Z,1509703883.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:23.743Z,1509703883.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:23.778Z,1509703883.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:24.194Z,1509703884.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:24.240Z,1509703884.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:24.542Z,1509703884.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:24.580Z,1509703884.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:24.953Z,1509703884.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:24.987Z,1509703884.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:25.365Z,1509703885.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:25.381Z,1509703885.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:25.770Z,1509703885.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:25.791Z,1509703885.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:26.137Z,1509703886.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:26.153Z,1509703886.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:26.542Z,1509703886.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:26.575Z,1509703886.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:26.947Z,1509703886.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:26.976Z,1509703886.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:27.344Z,1509703887.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:27.375Z,1509703887.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:27.778Z,1509703887.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:27.842Z,1509703887.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:28.154Z,1509703888.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:28.207Z,1509703888.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:31.362Z,1509703891.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:31.385Z,1509703891.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:31.539Z,1509703891.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:31.595Z,1509703891.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:31.916Z,1509703891.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:31.943Z,1509703891.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:32.314Z,1509703892.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:32.378Z,1509703892.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:32.715Z,1509703892.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:32.768Z,1509703892.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:33.134Z,1509703893.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:33.150Z,1509703893.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:33.537Z,1509703893.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:33.559Z,1509703893.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:33.939Z,1509703893.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:33.960Z,1509703893.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:34.315Z,1509703894.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:34.344Z,1509703894.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:34.709Z,1509703894.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:34.740Z,1509703894.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:35.116Z,1509703895.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:35.142Z,1509703895.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:35.515Z,1509703895.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:35.541Z,1509703895.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:35.934Z,1509703895.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:35.950Z,1509703895.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:36.332Z,1509703896.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:36.351Z,1509703896.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:36.734Z,1509703896.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:36.750Z,1509703896.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:37.116Z,1509703897.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:37.141Z,1509703897.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:37.514Z,1509703897.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:37.539Z,1509703897.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:37.933Z,1509703897.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:37.948Z,1509703897.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:38.343Z,1509703898.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:38.359Z,1509703898.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:38.733Z,1509703898.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:38.748Z,1509703898.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:39.115Z,1509703899.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:39.141Z,1509703899.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:39.515Z,1509703899.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:39.540Z,1509703899.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:39.933Z,1509703899.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:39.961Z,1509703899.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:40.329Z,1509703900.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:40.361Z,1509703900.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:40.729Z,1509703900.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:40.761Z,1509703900.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:41.119Z,1509703901.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:41.134Z,1509703901.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:41.519Z,1509703901.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:41.535Z,1509703901.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:41.911Z,1509703901.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:41.936Z,1509703901.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:42.313Z,1509703902.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:42.339Z,1509703902.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:42.708Z,1509703902.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:42.738Z,1509703902.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:43.133Z,1509703903.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:43.148Z,1509703903.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:43.532Z,1509703903.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:43.622Z,1509703903.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:43.933Z,1509703903.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:43.963Z,1509703903.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:44.319Z,1509703904.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:44.375Z,1509703904.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:44.714Z,1509703904.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:44.729Z,1509703904.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:45.112Z,1509703905.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:45.156Z,1509703905.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:45.511Z,1509703905.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:45.566Z,1509703905.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:45.930Z,1509703905.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:45.953Z,1509703905.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:46.329Z,1509703906.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:46.358Z,1509703906.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:46.730Z,1509703906.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:46.753Z,1509703906.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:47.118Z,1509703907.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:47.133Z,1509703907.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:47.511Z,1509703907.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:47.526Z,1509703907.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:47.925Z,1509703907.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:47.960Z,1509703907.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:48.320Z,1509703908.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:48.336Z,1509703908.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:48.711Z,1509703908.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:48.726Z,1509703908.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:49.125Z,1509703909.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:49.157Z,1509703909.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:49.529Z,1509703909.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:49.558Z,1509703909.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:49.929Z,1509703909.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:49.959Z,1509703909.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:50.320Z,1509703910.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:50.335Z,1509703910.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:50.719Z,1509703910.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:50.735Z,1509703910.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:51.116Z,1509703911.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:51.131Z,1509703911.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:51.516Z,1509703911.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:51.531Z,1509703911.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:51.929Z,1509703911.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:51.957Z,1509703911.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:52.333Z,1509703912.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:52.356Z,1509703912.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:52.730Z,1509703912.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:52.760Z,1509703912.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:53.116Z,1509703913.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:53.131Z,1509703913.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:53.515Z,1509703913.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:53.530Z,1509703913.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:53.935Z,1509703913.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:53.951Z,1509703913.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:54.336Z,1509703914.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:54.352Z,1509703914.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:54.733Z,1509703914.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:54.748Z,1509703914.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:55.113Z,1509703915.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:55.143Z,1509703915.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:55.513Z,1509703915.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:55.538Z,1509703915.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:55.942Z,1509703915.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:56.011Z,1509703916.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:56.333Z,1509703916.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:56.348Z,1509703916.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:56.733Z,1509703916.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:56.767Z,1509703916.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:57.112Z,1509703917.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:57.127Z,1509703917.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:57.513Z,1509703917.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:57.528Z,1509703917.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:57.929Z,1509703917.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:57.991Z,1509703917.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:58.332Z,1509703918.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:58.347Z,1509703918.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:58.433Z,1509703918.433 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T10:11:58.731Z,1509703918.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:58.783Z,1509703918.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:59.119Z,1509703919.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:59.175Z,1509703919.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:59.340Z,1509703919.340 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:11:59.340Z,1509703919.340 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T10:11:59.340Z,1509703919.340 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:11:59.506Z,1509703919.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:59.531Z,1509703919.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:11:59.533Z,1509703919.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:11:59.659Z,1509703919.659 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:11:59.744Z,1509703919.744 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:11:59.836Z,1509703919.836 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:11:59.928Z,1509703919.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:11:59.945Z,1509703919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:11:59.946Z,1509703919.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:00.029Z,1509703920.029 [CBIT](INFO): Clearing failed state for component DropWeight
2017-11-03T10:12:00.029Z,1509703920.029 [DropWeight] No Fault, FailCount= 1
2017-11-03T10:12:00.323Z,1509703920.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:00.339Z,1509703920.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:12:00.340Z,1509703920.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:00.724Z,1509703920.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:00.739Z,1509703920.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:12:00.740Z,1509703920.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:01.132Z,1509703921.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:01.147Z,1509703921.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:12:01.148Z,1509703921.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:01.229Z,1509703921.229 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:12:01.229Z,1509703921.229 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T10:12:01.453Z,1509703921.453 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:12:01.453Z,1509703921.453 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:12:01.453Z,1509703921.453 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:12:01.453Z,1509703921.453 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:12:01.532Z,1509703921.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:01.547Z,1509703921.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:12:01.548Z,1509703921.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:01.929Z,1509703921.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:01.944Z,1509703921.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:12:01.945Z,1509703921.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:02.323Z,1509703922.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:02.338Z,1509703922.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:12:02.339Z,1509703922.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:02.720Z,1509703922.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:02.735Z,1509703922.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:12:02.737Z,1509703922.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:03.121Z,1509703923.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:03.135Z,1509703923.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:12:03.136Z,1509703923.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:03.516Z,1509703923.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:03.531Z,1509703923.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:12:03.532Z,1509703923.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:03.930Z,1509703923.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:03.957Z,1509703923.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:12:03.958Z,1509703923.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:04.329Z,1509703924.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:04.344Z,1509703924.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:12:04.368Z,1509703924.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:04.730Z,1509703924.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:04.761Z,1509703924.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:12:04.762Z,1509703924.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:05.122Z,1509703925.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:05.137Z,1509703925.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:12:05.138Z,1509703925.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:05.566Z,1509703925.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:05.587Z,1509703925.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:12:05.588Z,1509703925.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:05.679Z,1509703925.679 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:12:05.765Z,1509703925.765 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:12:05.766Z,1509703925.766 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:12:05.766Z,1509703925.766 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:12:05.767Z,1509703925.767 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:12:05.923Z,1509703925.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:05.940Z,1509703925.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:12:05.942Z,1509703925.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:06.321Z,1509703926.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:06.338Z,1509703926.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:06.724Z,1509703926.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:06.740Z,1509703926.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:07.135Z,1509703927.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:07.151Z,1509703927.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:07.539Z,1509703927.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:07.559Z,1509703927.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:07.936Z,1509703927.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:07.951Z,1509703927.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:08.316Z,1509703928.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:08.344Z,1509703928.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:08.714Z,1509703928.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:08.742Z,1509703928.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:09.115Z,1509703929.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:09.144Z,1509703929.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:09.516Z,1509703929.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:09.571Z,1509703929.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:09.937Z,1509703929.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:09.953Z,1509703929.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:10.337Z,1509703930.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:10.359Z,1509703930.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:10.740Z,1509703930.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:10.763Z,1509703930.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:11.112Z,1509703931.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:11.145Z,1509703931.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:11.513Z,1509703931.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:11.545Z,1509703931.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:11.912Z,1509703931.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:11.929Z,1509703931.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:12.334Z,1509703932.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:12.366Z,1509703932.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:12.748Z,1509703932.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:12.764Z,1509703932.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:13.125Z,1509703933.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:13.158Z,1509703933.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:13.525Z,1509703933.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:13.561Z,1509703933.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:13.929Z,1509703933.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:13.963Z,1509703933.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:14.312Z,1509703934.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:14.320Z,1509703934.320 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:12:14.320Z,1509703934.320 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:12:14.321Z,1509703934.321 [BPC1](ERROR): Communications Fault
2017-11-03T10:12:14.329Z,1509703934.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:14.409Z,1509703934.409 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:12:14.717Z,1509703934.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:14.733Z,1509703934.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:15.121Z,1509703935.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:15.137Z,1509703935.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:15.520Z,1509703935.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:15.543Z,1509703935.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:15.677Z,1509703935.677 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:12:15.677Z,1509703935.677 [BPC1] No Fault, FailCount= 1
2017-11-03T10:12:15.934Z,1509703935.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:16.014Z,1509703936.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:16.330Z,1509703936.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:16.361Z,1509703936.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:16.730Z,1509703936.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:16.761Z,1509703936.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:17.115Z,1509703937.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:17.170Z,1509703937.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:17.516Z,1509703937.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:17.531Z,1509703937.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:17.923Z,1509703937.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:17.943Z,1509703937.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:18.323Z,1509703938.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:18.343Z,1509703938.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:18.721Z,1509703938.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:18.736Z,1509703938.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:19.132Z,1509703939.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:19.155Z,1509703939.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:19.532Z,1509703939.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:19.551Z,1509703939.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:19.933Z,1509703939.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:19.949Z,1509703939.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:20.308Z,1509703940.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:20.324Z,1509703940.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:20.715Z,1509703940.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:20.749Z,1509703940.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:21.108Z,1509703941.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:21.123Z,1509703941.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:21.508Z,1509703941.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:21.524Z,1509703941.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:21.921Z,1509703941.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:21.947Z,1509703941.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:22.324Z,1509703942.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:22.351Z,1509703942.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:22.725Z,1509703942.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:22.759Z,1509703942.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:23.113Z,1509703943.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:23.145Z,1509703943.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:23.515Z,1509703943.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:23.530Z,1509703943.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:23.940Z,1509703943.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:23.955Z,1509703943.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:24.330Z,1509703944.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:24.352Z,1509703944.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:24.730Z,1509703944.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:24.753Z,1509703944.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:25.115Z,1509703945.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:25.154Z,1509703945.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:25.512Z,1509703945.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:25.528Z,1509703945.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:25.931Z,1509703945.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:25.962Z,1509703945.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:25.962Z,1509703945.962 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 199
2017-11-03T10:12:25.962Z,1509703945.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:12:25.964Z,1509703945.964 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:25.964Z,1509703945.964 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 199
2017-11-03T10:12:25.964Z,1509703945.964 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:12:25.966Z,1509703945.966 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:25.966Z,1509703945.966 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 199
2017-11-03T10:12:25.967Z,1509703945.967 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:12:26.041Z,1509703946.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:12:26.041Z,1509703946.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:12:26.041Z,1509703946.041 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:12:26.325Z,1509703946.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:26.442Z,1509703946.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:12:26.442Z,1509703946.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 199
2017-11-03T10:12:26.443Z,1509703946.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:12:26.443Z,1509703946.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 199
2017-11-03T10:12:26.443Z,1509703946.443 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:12:26.443Z,1509703946.443 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 199
2017-11-03T10:12:26.719Z,1509703946.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:26.733Z,1509703946.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:12:26.734Z,1509703946.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:12:26.734Z,1509703946.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:12:26.734Z,1509703946.734 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:12:26.735Z,1509703946.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:12:26.735Z,1509703946.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:12:26.736Z,1509703946.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:12:26.736Z,1509703946.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:12:26.752Z,1509703946.752 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:12:27.134Z,1509703947.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:27.161Z,1509703947.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:27.529Z,1509703947.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:27.561Z,1509703947.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:27.929Z,1509703947.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:27.971Z,1509703947.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:28.319Z,1509703948.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:28.339Z,1509703948.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:31.517Z,1509703951.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:31.639Z,1509703951.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:31.807Z,1509703951.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:31.834Z,1509703951.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:32.213Z,1509703952.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:32.236Z,1509703952.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:32.613Z,1509703952.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:32.643Z,1509703952.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:33.009Z,1509703953.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:33.106Z,1509703953.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:33.399Z,1509703953.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:33.454Z,1509703953.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:33.801Z,1509703953.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:33.826Z,1509703953.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:34.198Z,1509703954.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:34.243Z,1509703954.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:34.605Z,1509703954.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:34.651Z,1509703954.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:35.011Z,1509703955.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:35.036Z,1509703955.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:35.415Z,1509703955.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:35.440Z,1509703955.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:35.826Z,1509703955.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:35.853Z,1509703955.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:36.205Z,1509703956.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:36.221Z,1509703956.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:36.600Z,1509703956.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:36.617Z,1509703956.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:37.000Z,1509703957.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:37.015Z,1509703957.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:37.401Z,1509703957.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:37.416Z,1509703957.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:37.805Z,1509703957.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:37.820Z,1509703957.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:38.214Z,1509703958.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:38.246Z,1509703958.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:38.618Z,1509703958.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:38.654Z,1509703958.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:39.009Z,1509703959.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:39.031Z,1509703959.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:39.405Z,1509703959.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:39.420Z,1509703959.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:39.804Z,1509703959.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:39.899Z,1509703959.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:40.205Z,1509703960.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:40.220Z,1509703960.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:40.605Z,1509703960.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:40.620Z,1509703960.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:41.010Z,1509703961.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:41.025Z,1509703961.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:41.409Z,1509703961.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:41.425Z,1509703961.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:41.810Z,1509703961.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:41.825Z,1509703961.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:42.216Z,1509703962.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:42.246Z,1509703962.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:42.605Z,1509703962.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:42.620Z,1509703962.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:43.004Z,1509703963.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:43.020Z,1509703963.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:43.409Z,1509703963.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:43.425Z,1509703963.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:43.804Z,1509703963.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:43.819Z,1509703963.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:44.229Z,1509703964.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:44.250Z,1509703964.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:44.614Z,1509703964.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:44.629Z,1509703964.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:45.012Z,1509703965.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:45.027Z,1509703965.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:45.401Z,1509703965.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:45.465Z,1509703965.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:45.803Z,1509703965.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:45.823Z,1509703965.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:46.201Z,1509703966.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:46.266Z,1509703966.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:46.605Z,1509703966.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:46.620Z,1509703966.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:47.012Z,1509703967.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:47.035Z,1509703967.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:47.412Z,1509703967.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:47.463Z,1509703967.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:47.812Z,1509703967.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:47.827Z,1509703967.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:48.200Z,1509703968.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:48.255Z,1509703968.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:48.600Z,1509703968.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:48.655Z,1509703968.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:49.004Z,1509703969.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:49.019Z,1509703969.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:49.392Z,1509703969.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:49.426Z,1509703969.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:49.815Z,1509703969.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:49.830Z,1509703969.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:50.217Z,1509703970.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:50.233Z,1509703970.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:50.620Z,1509703970.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:50.643Z,1509703970.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:51.016Z,1509703971.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:51.032Z,1509703971.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:51.406Z,1509703971.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:51.421Z,1509703971.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:51.815Z,1509703971.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:51.830Z,1509703971.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:52.205Z,1509703972.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:52.221Z,1509703972.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:52.608Z,1509703972.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:52.623Z,1509703972.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:53.017Z,1509703973.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:53.032Z,1509703973.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:53.417Z,1509703973.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:53.432Z,1509703973.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:53.834Z,1509703973.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:53.933Z,1509703973.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:54.199Z,1509703974.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:54.225Z,1509703974.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:54.599Z,1509703974.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:54.625Z,1509703974.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:55.001Z,1509703975.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:55.015Z,1509703975.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:55.403Z,1509703975.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:55.423Z,1509703975.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:55.800Z,1509703975.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:55.815Z,1509703975.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:56.221Z,1509703976.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:56.259Z,1509703976.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:56.617Z,1509703976.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:56.642Z,1509703976.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:57.013Z,1509703977.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:57.045Z,1509703977.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:57.401Z,1509703977.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:57.416Z,1509703977.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:57.799Z,1509703977.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:57.815Z,1509703977.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:58.214Z,1509703978.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:58.249Z,1509703978.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:58.600Z,1509703978.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:58.616Z,1509703978.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:59.014Z,1509703979.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:59.045Z,1509703979.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:59.417Z,1509703979.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:59.443Z,1509703979.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:12:59.817Z,1509703979.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:12:59.842Z,1509703979.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:00.200Z,1509703980.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:00.223Z,1509703980.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:00.597Z,1509703980.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:00.659Z,1509703980.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:01.004Z,1509703981.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:01.019Z,1509703981.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:01.407Z,1509703981.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:01.455Z,1509703981.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:01.802Z,1509703981.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:01.818Z,1509703981.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:02.209Z,1509703982.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:02.255Z,1509703982.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:02.613Z,1509703982.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:02.659Z,1509703982.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:03.009Z,1509703983.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:03.025Z,1509703983.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:03.405Z,1509703983.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:03.427Z,1509703983.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:03.803Z,1509703983.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:03.823Z,1509703983.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:04.205Z,1509703984.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:04.220Z,1509703984.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:04.605Z,1509703984.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:04.619Z,1509703984.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:05.010Z,1509703985.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:05.025Z,1509703985.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:05.410Z,1509703985.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:05.425Z,1509703985.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:05.810Z,1509703985.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:05.825Z,1509703985.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:06.206Z,1509703986.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:06.221Z,1509703986.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:06.604Z,1509703986.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:06.627Z,1509703986.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:07.006Z,1509703987.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:07.021Z,1509703987.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:07.407Z,1509703987.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:07.427Z,1509703987.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:07.804Z,1509703987.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:07.881Z,1509703987.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:08.209Z,1509703988.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:08.225Z,1509703988.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:08.613Z,1509703988.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:08.629Z,1509703988.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:09.010Z,1509703989.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:09.025Z,1509703989.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:09.406Z,1509703989.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:09.421Z,1509703989.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:09.807Z,1509703989.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:09.823Z,1509703989.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:10.218Z,1509703990.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:10.249Z,1509703990.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:10.607Z,1509703990.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:10.622Z,1509703990.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:11.010Z,1509703991.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:11.025Z,1509703991.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:11.410Z,1509703991.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:11.426Z,1509703991.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:11.814Z,1509703991.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:11.856Z,1509703991.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:12.225Z,1509703992.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:12.252Z,1509703992.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:12.606Z,1509703992.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:12.621Z,1509703992.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:13.009Z,1509703993.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:13.025Z,1509703993.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:13.410Z,1509703993.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:13.426Z,1509703993.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:13.804Z,1509703993.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:13.820Z,1509703993.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:14.211Z,1509703994.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:14.226Z,1509703994.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:14.610Z,1509703994.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:14.677Z,1509703994.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:15.010Z,1509703995.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:15.074Z,1509703995.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:15.408Z,1509703995.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:15.425Z,1509703995.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:15.805Z,1509703995.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:15.822Z,1509703995.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:16.206Z,1509703996.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:16.266Z,1509703996.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:16.605Z,1509703996.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:16.627Z,1509703996.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:17.013Z,1509703997.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:17.063Z,1509703997.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:17.412Z,1509703997.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:17.466Z,1509703997.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:17.813Z,1509703997.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:17.828Z,1509703997.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:18.200Z,1509703998.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:18.215Z,1509703998.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:18.604Z,1509703998.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:18.619Z,1509703998.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:19.000Z,1509703999.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:19.015Z,1509703999.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:19.407Z,1509703999.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:19.423Z,1509703999.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:19.802Z,1509703999.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:19.818Z,1509703999.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:20.212Z,1509704000.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:20.228Z,1509704000.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:20.613Z,1509704000.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:20.629Z,1509704000.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:21.011Z,1509704001.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:21.031Z,1509704001.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:21.407Z,1509704001.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:21.422Z,1509704001.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:21.804Z,1509704001.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:21.883Z,1509704001.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:22.207Z,1509704002.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:22.227Z,1509704002.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:22.608Z,1509704002.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:22.623Z,1509704002.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:23.010Z,1509704003.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:23.033Z,1509704003.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:23.421Z,1509704003.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:23.436Z,1509704003.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:23.818Z,1509704003.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:23.833Z,1509704003.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:24.220Z,1509704004.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:24.237Z,1509704004.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:24.597Z,1509704004.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:24.631Z,1509704004.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:24.997Z,1509704004.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:25.024Z,1509704005.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:25.410Z,1509704005.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:25.426Z,1509704005.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:25.799Z,1509704005.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:25.825Z,1509704005.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:26.224Z,1509704006.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:26.262Z,1509704006.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:26.622Z,1509704006.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:26.637Z,1509704006.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:27.017Z,1509704007.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:27.033Z,1509704007.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:27.398Z,1509704007.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:27.424Z,1509704007.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:27.428Z,1509704007.428 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T10:13:27.428Z,1509704007.428 [Default:CheckIn:C.Wait] Stopped
2017-11-03T10:13:27.428Z,1509704007.428 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T10:13:27.428Z,1509704007.428 [Default:CheckIn:D] Running Loop=1
2017-11-03T10:13:27.815Z,1509704007.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:27.831Z,1509704007.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:27.834Z,1509704007.834 [Default:CheckIn:D] Stopped
2017-11-03T10:13:27.834Z,1509704007.834 [Default:CheckIn:E] Running Loop=1
2017-11-03T10:13:28.198Z,1509704008.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:28.224Z,1509704008.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:28.228Z,1509704008.228 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 598.337826 min 
2017-11-03T10:13:28.228Z,1509704008.228 [Default:CheckIn:E] Stopped
2017-11-03T10:13:28.229Z,1509704008.229 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T10:13:28.229Z,1509704008.229 [Default:CheckIn] Stopped
2017-11-03T10:13:28.229Z,1509704008.229 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T10:13:28.229Z,1509704008.229 [Default:CheckIn](INFO): Running loop #59
2017-11-03T10:13:28.229Z,1509704008.229 [Default:CheckIn] Running Loop=59
2017-11-03T10:13:28.229Z,1509704008.229 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T10:13:28.229Z,1509704008.229 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T10:13:28.596Z,1509704008.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:28.628Z,1509704008.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:31.894Z,1509704011.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:31.971Z,1509704011.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:32.109Z,1509704012.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:32.139Z,1509704012.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:32.505Z,1509704012.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:32.539Z,1509704012.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:32.899Z,1509704012.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:32.950Z,1509704012.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:33.292Z,1509704013.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:33.307Z,1509704013.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:33.735Z,1509704013.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:33.787Z,1509704013.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:34.105Z,1509704014.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:34.137Z,1509704014.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:34.505Z,1509704014.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:34.554Z,1509704014.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:34.910Z,1509704014.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:34.943Z,1509704014.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:35.292Z,1509704015.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:35.308Z,1509704015.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:35.691Z,1509704015.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:35.707Z,1509704015.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:36.100Z,1509704016.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:36.115Z,1509704016.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:36.492Z,1509704016.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:36.508Z,1509704016.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:36.909Z,1509704016.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:36.935Z,1509704016.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:37.313Z,1509704017.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:37.343Z,1509704017.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:37.709Z,1509704017.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:37.734Z,1509704017.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:38.099Z,1509704018.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:38.183Z,1509704018.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:38.492Z,1509704018.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:38.507Z,1509704018.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:38.905Z,1509704018.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:38.941Z,1509704018.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:39.309Z,1509704019.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:39.341Z,1509704019.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:39.713Z,1509704019.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:39.738Z,1509704019.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:40.104Z,1509704020.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:40.191Z,1509704020.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:40.497Z,1509704020.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:40.519Z,1509704020.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:40.910Z,1509704020.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:40.942Z,1509704020.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:41.310Z,1509704021.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:41.341Z,1509704021.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:41.729Z,1509704021.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:41.745Z,1509704021.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:42.099Z,1509704022.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:42.115Z,1509704022.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:42.499Z,1509704022.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:42.515Z,1509704022.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:42.910Z,1509704022.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:42.943Z,1509704022.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:43.310Z,1509704023.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:43.344Z,1509704023.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:43.731Z,1509704023.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:43.747Z,1509704023.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:44.113Z,1509704024.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:44.139Z,1509704024.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:44.496Z,1509704024.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:44.512Z,1509704024.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:44.910Z,1509704024.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:44.943Z,1509704024.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:45.310Z,1509704025.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:45.342Z,1509704025.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:45.719Z,1509704025.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:45.744Z,1509704025.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:46.097Z,1509704026.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:46.114Z,1509704026.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:46.499Z,1509704026.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:46.578Z,1509704026.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:46.909Z,1509704026.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:46.945Z,1509704026.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:47.309Z,1509704027.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:47.367Z,1509704027.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:47.734Z,1509704027.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:47.763Z,1509704027.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:48.102Z,1509704028.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:48.155Z,1509704028.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:48.503Z,1509704028.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:48.558Z,1509704028.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:48.908Z,1509704028.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:48.924Z,1509704028.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:49.309Z,1509704029.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:49.331Z,1509704029.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:49.709Z,1509704029.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:49.731Z,1509704029.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:50.099Z,1509704030.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:50.114Z,1509704030.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:50.501Z,1509704030.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:50.519Z,1509704030.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:50.907Z,1509704030.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:50.923Z,1509704030.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:51.307Z,1509704031.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:51.323Z,1509704031.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:51.708Z,1509704031.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:51.724Z,1509704031.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:52.108Z,1509704032.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:52.174Z,1509704032.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:52.502Z,1509704032.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:52.523Z,1509704032.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:52.912Z,1509704032.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:52.929Z,1509704032.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:53.312Z,1509704033.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:53.335Z,1509704033.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:53.712Z,1509704033.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:53.728Z,1509704033.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:54.110Z,1509704034.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:54.187Z,1509704034.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:54.502Z,1509704034.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:54.523Z,1509704034.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:54.912Z,1509704034.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:54.928Z,1509704034.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:55.312Z,1509704035.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:55.327Z,1509704035.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:55.709Z,1509704035.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:55.725Z,1509704035.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:56.103Z,1509704036.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:56.119Z,1509704036.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:56.504Z,1509704036.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:56.520Z,1509704036.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:56.912Z,1509704036.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:56.928Z,1509704036.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:57.311Z,1509704037.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:57.331Z,1509704037.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:57.750Z,1509704037.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:57.765Z,1509704037.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:58.103Z,1509704038.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:58.123Z,1509704038.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:58.508Z,1509704038.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:58.524Z,1509704038.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:58.904Z,1509704038.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:58.920Z,1509704038.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:59.304Z,1509704039.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:59.320Z,1509704039.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:13:59.706Z,1509704039.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:13:59.724Z,1509704039.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:00.113Z,1509704040.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:00.135Z,1509704040.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:00.512Z,1509704040.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:00.579Z,1509704040.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:00.913Z,1509704040.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:00.935Z,1509704040.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:01.302Z,1509704041.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:01.355Z,1509704041.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:01.721Z,1509704041.721 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:14:01.721Z,1509704041.721 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T10:14:01.721Z,1509704041.721 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:14:01.729Z,1509704041.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:01.772Z,1509704041.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:14:01.773Z,1509704041.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:01.849Z,1509704041.849 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:14:02.103Z,1509704042.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:02.124Z,1509704042.124 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:14:02.206Z,1509704042.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-03T10:14:02.207Z,1509704042.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:02.291Z,1509704042.291 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:14:02.504Z,1509704042.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:02.523Z,1509704042.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:14:02.524Z,1509704042.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:02.909Z,1509704042.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:02.962Z,1509704042.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:14:02.964Z,1509704042.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:03.313Z,1509704043.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:03.334Z,1509704043.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:14:03.335Z,1509704043.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:03.718Z,1509704043.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:03.750Z,1509704043.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:14:03.751Z,1509704043.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:03.845Z,1509704043.845 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:14:03.846Z,1509704043.846 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T10:14:03.908Z,1509704043.908 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:14:03.909Z,1509704043.909 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:14:03.909Z,1509704043.909 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:14:03.909Z,1509704043.909 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:14:04.103Z,1509704044.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:04.119Z,1509704044.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:14:04.120Z,1509704044.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:04.500Z,1509704044.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:04.522Z,1509704044.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:14:04.523Z,1509704044.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:04.916Z,1509704044.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:04.938Z,1509704044.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:14:04.939Z,1509704044.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:05.315Z,1509704045.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:05.334Z,1509704045.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:14:05.335Z,1509704045.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:05.713Z,1509704045.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:05.734Z,1509704045.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:14:05.735Z,1509704045.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:06.105Z,1509704046.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:06.121Z,1509704046.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:14:06.122Z,1509704046.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:06.503Z,1509704046.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:06.523Z,1509704046.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:14:06.524Z,1509704046.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:06.913Z,1509704046.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:06.928Z,1509704046.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:14:06.929Z,1509704046.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:07.317Z,1509704047.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:07.338Z,1509704047.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:14:07.339Z,1509704047.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:07.713Z,1509704047.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:07.734Z,1509704047.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:14:07.735Z,1509704047.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:08.035Z,1509704048.035 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:14:08.105Z,1509704048.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:08.158Z,1509704048.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:14:08.159Z,1509704048.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:08.183Z,1509704048.183 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:14:08.184Z,1509704048.184 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:14:08.185Z,1509704048.185 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:14:08.185Z,1509704048.185 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:14:08.513Z,1509704048.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:08.528Z,1509704048.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:14:08.530Z,1509704048.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:08.917Z,1509704048.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:08.933Z,1509704048.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:09.316Z,1509704049.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:09.332Z,1509704049.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:09.714Z,1509704049.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:09.735Z,1509704049.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:10.096Z,1509704050.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:10.123Z,1509704050.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:10.493Z,1509704050.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:10.524Z,1509704050.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:10.914Z,1509704050.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:10.935Z,1509704050.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:11.318Z,1509704051.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:11.333Z,1509704051.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:11.713Z,1509704051.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:11.735Z,1509704051.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:12.096Z,1509704052.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:12.123Z,1509704052.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:12.506Z,1509704052.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:12.524Z,1509704052.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:12.913Z,1509704052.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:12.935Z,1509704052.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:13.314Z,1509704053.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:13.330Z,1509704053.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:13.713Z,1509704053.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:13.735Z,1509704053.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:14.096Z,1509704054.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:14.122Z,1509704054.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:14.493Z,1509704054.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:14.521Z,1509704054.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:14.907Z,1509704054.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:15.031Z,1509704055.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:15.309Z,1509704055.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:15.339Z,1509704055.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:15.713Z,1509704055.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:15.788Z,1509704055.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:16.098Z,1509704056.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:16.113Z,1509704056.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:16.497Z,1509704056.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:16.550Z,1509704056.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:16.909Z,1509704056.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:16.962Z,1509704056.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:17.310Z,1509704057.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:17.340Z,1509704057.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:17.718Z,1509704057.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:17.741Z,1509704057.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:18.098Z,1509704058.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:18.119Z,1509704058.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:18.498Z,1509704058.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:18.513Z,1509704058.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:18.913Z,1509704058.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:18.943Z,1509704058.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:19.318Z,1509704059.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:19.341Z,1509704059.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:19.718Z,1509704059.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:19.741Z,1509704059.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:20.099Z,1509704060.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:20.115Z,1509704060.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:20.498Z,1509704060.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:20.513Z,1509704060.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:20.903Z,1509704060.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:20.919Z,1509704060.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:21.311Z,1509704061.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:21.341Z,1509704061.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:21.717Z,1509704061.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:21.752Z,1509704061.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:22.097Z,1509704062.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:22.114Z,1509704062.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:22.497Z,1509704062.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:22.513Z,1509704062.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:22.910Z,1509704062.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:22.942Z,1509704062.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:23.310Z,1509704063.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:23.340Z,1509704063.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:23.736Z,1509704063.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:23.751Z,1509704063.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:24.097Z,1509704064.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:24.113Z,1509704064.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:24.496Z,1509704064.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:24.515Z,1509704064.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:24.910Z,1509704064.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:24.943Z,1509704064.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:25.309Z,1509704065.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:25.340Z,1509704065.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:25.746Z,1509704065.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:25.763Z,1509704065.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:26.096Z,1509704066.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:26.119Z,1509704066.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:26.495Z,1509704066.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:26.510Z,1509704066.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:26.910Z,1509704066.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:26.941Z,1509704066.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:27.310Z,1509704067.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:27.341Z,1509704067.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:27.709Z,1509704067.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:27.741Z,1509704067.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:28.097Z,1509704068.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:28.125Z,1509704068.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:28.500Z,1509704068.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:28.515Z,1509704068.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:28.913Z,1509704068.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:28.964Z,1509704068.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:32.096Z,1509704072.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:32.227Z,1509704072.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:32.365Z,1509704072.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:32.411Z,1509704072.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:32.758Z,1509704072.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:32.849Z,1509704072.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:33.155Z,1509704073.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:33.171Z,1509704073.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:33.558Z,1509704073.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:33.671Z,1509704073.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:33.961Z,1509704073.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:34.018Z,1509704074.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:34.366Z,1509704074.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:34.381Z,1509704074.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:34.761Z,1509704074.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:34.777Z,1509704074.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:35.159Z,1509704075.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:35.179Z,1509704075.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:35.558Z,1509704075.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:35.649Z,1509704075.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:35.956Z,1509704075.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:35.971Z,1509704075.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:36.358Z,1509704076.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:36.373Z,1509704076.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:36.758Z,1509704076.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:36.777Z,1509704076.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:37.161Z,1509704077.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:37.177Z,1509704077.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:37.565Z,1509704077.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:37.643Z,1509704077.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:37.964Z,1509704077.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:37.991Z,1509704077.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:38.357Z,1509704078.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:38.383Z,1509704078.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:38.760Z,1509704078.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:38.775Z,1509704078.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:39.146Z,1509704079.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:39.171Z,1509704079.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:39.556Z,1509704079.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:39.578Z,1509704079.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:39.970Z,1509704079.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:39.989Z,1509704079.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:40.366Z,1509704080.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:40.414Z,1509704080.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:40.770Z,1509704080.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:40.785Z,1509704080.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:41.161Z,1509704081.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:41.177Z,1509704081.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:41.559Z,1509704081.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:41.582Z,1509704081.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:41.963Z,1509704081.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:41.987Z,1509704081.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:42.361Z,1509704082.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:42.377Z,1509704082.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:42.758Z,1509704082.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:42.774Z,1509704082.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:43.173Z,1509704083.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:43.191Z,1509704083.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:43.572Z,1509704083.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:43.613Z,1509704083.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:43.970Z,1509704083.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:43.992Z,1509704083.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:44.348Z,1509704084.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:44.389Z,1509704084.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:44.760Z,1509704084.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:44.781Z,1509704084.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:45.160Z,1509704085.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:45.177Z,1509704085.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:45.560Z,1509704085.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:45.577Z,1509704085.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:45.975Z,1509704085.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:46.023Z,1509704086.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:46.369Z,1509704086.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:46.438Z,1509704086.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:46.770Z,1509704086.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:46.787Z,1509704086.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:47.145Z,1509704087.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:47.177Z,1509704087.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:47.552Z,1509704087.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:47.675Z,1509704087.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:47.948Z,1509704087.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:47.991Z,1509704087.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:48.352Z,1509704088.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:48.423Z,1509704088.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:48.751Z,1509704088.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:48.804Z,1509704088.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:49.169Z,1509704089.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:49.190Z,1509704089.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:49.561Z,1509704089.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:49.630Z,1509704089.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:49.970Z,1509704089.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:50.018Z,1509704090.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:50.354Z,1509704090.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:50.373Z,1509704090.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:50.756Z,1509704090.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:50.770Z,1509704090.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:51.157Z,1509704091.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:51.175Z,1509704091.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:51.554Z,1509704091.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:51.573Z,1509704091.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:51.965Z,1509704091.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:51.980Z,1509704091.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:52.364Z,1509704092.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:52.379Z,1509704092.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:52.764Z,1509704092.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:52.784Z,1509704092.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:53.153Z,1509704093.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:53.167Z,1509704093.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:53.543Z,1509704093.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:53.574Z,1509704093.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:53.966Z,1509704093.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:53.983Z,1509704093.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:54.358Z,1509704094.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:54.375Z,1509704094.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:54.753Z,1509704094.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:54.774Z,1509704094.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:55.168Z,1509704095.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:55.184Z,1509704095.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:55.568Z,1509704095.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:55.587Z,1509704095.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:55.968Z,1509704095.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:55.987Z,1509704095.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:56.356Z,1509704096.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:56.372Z,1509704096.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:56.755Z,1509704096.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:56.770Z,1509704096.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:57.159Z,1509704097.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:57.179Z,1509704097.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:57.556Z,1509704097.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:57.573Z,1509704097.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:57.968Z,1509704097.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:57.984Z,1509704097.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:58.368Z,1509704098.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:58.383Z,1509704098.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:58.768Z,1509704098.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:58.787Z,1509704098.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:59.159Z,1509704099.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:59.179Z,1509704099.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:59.559Z,1509704099.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:59.579Z,1509704099.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:14:59.956Z,1509704099.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:14:59.972Z,1509704099.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:00.368Z,1509704100.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:00.387Z,1509704100.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:00.753Z,1509704100.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:00.815Z,1509704100.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:01.169Z,1509704101.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:01.238Z,1509704101.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:01.599Z,1509704101.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:01.671Z,1509704101.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:01.969Z,1509704101.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:02.003Z,1509704102.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:02.348Z,1509704102.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:02.418Z,1509704102.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:02.748Z,1509704102.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:02.774Z,1509704102.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:03.152Z,1509704103.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:03.217Z,1509704103.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:03.551Z,1509704103.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:03.670Z,1509704103.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:03.970Z,1509704103.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:03.989Z,1509704103.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:04.369Z,1509704104.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:04.420Z,1509704104.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:04.769Z,1509704104.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:04.792Z,1509704104.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:05.151Z,1509704105.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:05.177Z,1509704105.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:05.551Z,1509704105.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:05.626Z,1509704105.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:05.948Z,1509704105.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:05.978Z,1509704105.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:06.349Z,1509704106.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:06.377Z,1509704106.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:06.748Z,1509704106.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:06.777Z,1509704106.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:07.170Z,1509704107.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:07.189Z,1509704107.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:07.566Z,1509704107.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:07.591Z,1509704107.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:07.962Z,1509704107.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:07.998Z,1509704107.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:08.351Z,1509704108.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:08.393Z,1509704108.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:08.747Z,1509704108.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:08.762Z,1509704108.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:09.148Z,1509704109.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:09.164Z,1509704109.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:09.548Z,1509704109.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:09.563Z,1509704109.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:09.982Z,1509704109.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:10.000Z,1509704110.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:10.370Z,1509704110.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:10.398Z,1509704110.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:10.762Z,1509704110.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:10.788Z,1509704110.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:11.155Z,1509704111.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:11.171Z,1509704111.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:11.551Z,1509704111.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:11.571Z,1509704111.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:11.953Z,1509704111.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:11.968Z,1509704111.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:12.352Z,1509704112.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:12.379Z,1509704112.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:12.756Z,1509704112.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:12.779Z,1509704112.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:13.164Z,1509704113.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:13.179Z,1509704113.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:13.565Z,1509704113.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:13.585Z,1509704113.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:13.964Z,1509704113.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:13.979Z,1509704113.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:14.354Z,1509704114.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:14.375Z,1509704114.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:14.757Z,1509704114.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:14.773Z,1509704114.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:15.157Z,1509704115.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:15.176Z,1509704115.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:15.556Z,1509704115.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:15.721Z,1509704115.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:15.967Z,1509704115.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:15.982Z,1509704115.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:16.366Z,1509704116.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:16.426Z,1509704116.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:16.769Z,1509704116.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:16.789Z,1509704116.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:17.144Z,1509704117.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:17.187Z,1509704117.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:17.551Z,1509704117.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:17.652Z,1509704117.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:17.948Z,1509704117.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:17.983Z,1509704117.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:18.351Z,1509704118.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:18.382Z,1509704118.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:18.748Z,1509704118.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:18.778Z,1509704118.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:19.169Z,1509704119.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:19.185Z,1509704119.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:19.570Z,1509704119.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:19.656Z,1509704119.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:19.971Z,1509704119.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:19.990Z,1509704119.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:20.349Z,1509704120.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:20.376Z,1509704120.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:20.745Z,1509704120.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:20.776Z,1509704120.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:21.153Z,1509704121.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:21.191Z,1509704121.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:21.548Z,1509704121.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:21.564Z,1509704121.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:21.958Z,1509704121.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:21.975Z,1509704121.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:22.370Z,1509704122.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:22.401Z,1509704122.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:22.763Z,1509704122.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:22.786Z,1509704122.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:23.154Z,1509704123.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:23.171Z,1509704123.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:23.554Z,1509704123.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:23.571Z,1509704123.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:23.963Z,1509704123.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:23.980Z,1509704123.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:24.362Z,1509704124.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:24.378Z,1509704124.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:24.758Z,1509704124.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:24.780Z,1509704124.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:25.162Z,1509704125.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:25.180Z,1509704125.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:25.566Z,1509704125.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:25.582Z,1509704125.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:25.962Z,1509704125.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:25.978Z,1509704125.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:26.355Z,1509704126.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:26.382Z,1509704126.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:26.759Z,1509704126.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:26.775Z,1509704126.775 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:26.775Z,1509704126.775 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 200
2017-11-03T10:15:26.775Z,1509704126.775 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:15:26.777Z,1509704126.777 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:26.777Z,1509704126.777 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 200
2017-11-03T10:15:26.777Z,1509704126.777 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:15:26.779Z,1509704126.779 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:26.779Z,1509704126.779 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 200
2017-11-03T10:15:26.779Z,1509704126.779 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:15:26.900Z,1509704126.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:15:26.901Z,1509704126.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:15:26.901Z,1509704126.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:15:27.159Z,1509704127.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:27.260Z,1509704127.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:15:27.260Z,1509704127.260 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 200
2017-11-03T10:15:27.261Z,1509704127.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:15:27.261Z,1509704127.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 200
2017-11-03T10:15:27.261Z,1509704127.261 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:15:27.261Z,1509704127.261 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 200
2017-11-03T10:15:27.551Z,1509704127.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:27.572Z,1509704127.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:15:27.573Z,1509704127.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:15:27.573Z,1509704127.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:15:27.574Z,1509704127.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:15:27.574Z,1509704127.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:15:27.574Z,1509704127.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:15:27.575Z,1509704127.575 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:15:27.575Z,1509704127.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:15:27.576Z,1509704127.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:15:27.970Z,1509704127.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:27.990Z,1509704127.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:28.372Z,1509704128.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:28.419Z,1509704128.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:28.769Z,1509704128.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:28.785Z,1509704128.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:29.161Z,1509704129.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:29.223Z,1509704129.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:32.432Z,1509704132.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:32.494Z,1509704132.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:32.632Z,1509704132.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:32.672Z,1509704132.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:33.037Z,1509704133.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:33.058Z,1509704133.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:33.438Z,1509704133.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:33.483Z,1509704133.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:33.850Z,1509704133.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:33.879Z,1509704133.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:34.229Z,1509704134.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:34.282Z,1509704134.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:34.628Z,1509704134.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:34.686Z,1509704134.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:35.028Z,1509704135.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:35.050Z,1509704135.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:35.431Z,1509704135.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:35.446Z,1509704135.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:35.827Z,1509704135.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:35.847Z,1509704135.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:36.233Z,1509704136.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:36.249Z,1509704136.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:36.633Z,1509704136.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:36.649Z,1509704136.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:37.034Z,1509704137.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:37.049Z,1509704137.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:37.428Z,1509704137.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:37.450Z,1509704137.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:37.865Z,1509704137.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:37.937Z,1509704137.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:38.229Z,1509704138.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:38.244Z,1509704138.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:38.628Z,1509704138.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:38.651Z,1509704138.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:39.032Z,1509704139.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:39.047Z,1509704139.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:39.433Z,1509704139.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:39.449Z,1509704139.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:39.834Z,1509704139.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:39.849Z,1509704139.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:40.226Z,1509704140.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:40.253Z,1509704140.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:40.628Z,1509704140.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:40.643Z,1509704140.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:41.030Z,1509704141.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:41.051Z,1509704141.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:41.432Z,1509704141.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:41.446Z,1509704141.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:41.829Z,1509704141.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:41.844Z,1509704141.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:42.240Z,1509704142.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:42.273Z,1509704142.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:42.641Z,1509704142.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:42.663Z,1509704142.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:43.039Z,1509704143.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:43.059Z,1509704143.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:43.428Z,1509704143.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:43.444Z,1509704143.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:43.838Z,1509704143.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:43.853Z,1509704143.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:44.232Z,1509704144.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:44.247Z,1509704144.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:44.629Z,1509704144.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:44.644Z,1509704144.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:45.041Z,1509704145.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:45.063Z,1509704145.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:45.440Z,1509704145.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:45.455Z,1509704145.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:45.838Z,1509704145.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:45.853Z,1509704145.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:46.231Z,1509704146.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:46.246Z,1509704146.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:46.631Z,1509704146.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:46.707Z,1509704146.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:47.019Z,1509704147.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:47.046Z,1509704147.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:47.417Z,1509704147.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:47.444Z,1509704147.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:47.836Z,1509704147.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:47.894Z,1509704147.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:48.242Z,1509704148.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:48.257Z,1509704148.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:48.644Z,1509704148.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:48.698Z,1509704148.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:49.043Z,1509704149.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:49.150Z,1509704149.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:49.432Z,1509704149.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:49.447Z,1509704149.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:49.843Z,1509704149.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:49.859Z,1509704149.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:50.231Z,1509704150.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:50.251Z,1509704150.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:50.630Z,1509704150.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:50.647Z,1509704150.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:51.044Z,1509704151.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:51.059Z,1509704151.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:51.445Z,1509704151.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:51.460Z,1509704151.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:51.854Z,1509704151.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:51.937Z,1509704151.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:52.230Z,1509704152.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:52.270Z,1509704152.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:52.626Z,1509704152.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:52.673Z,1509704152.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:53.025Z,1509704153.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:53.098Z,1509704153.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:53.421Z,1509704153.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:53.469Z,1509704153.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:53.825Z,1509704153.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:53.856Z,1509704153.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:54.246Z,1509704154.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:54.301Z,1509704154.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:54.646Z,1509704154.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:54.697Z,1509704154.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:55.040Z,1509704155.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:55.075Z,1509704155.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:55.421Z,1509704155.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:55.467Z,1509704155.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:55.841Z,1509704155.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:55.900Z,1509704155.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:56.229Z,1509704156.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:56.260Z,1509704156.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:56.646Z,1509704156.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:56.676Z,1509704156.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:57.039Z,1509704157.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:57.083Z,1509704157.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:57.444Z,1509704157.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:57.468Z,1509704157.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:57.852Z,1509704157.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:57.898Z,1509704157.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:58.230Z,1509704158.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:58.259Z,1509704158.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:58.623Z,1509704158.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:58.655Z,1509704158.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:59.021Z,1509704159.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:59.053Z,1509704159.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:59.421Z,1509704159.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:59.478Z,1509704159.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:15:59.822Z,1509704159.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:15:59.859Z,1509704159.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:00.232Z,1509704160.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:00.271Z,1509704160.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:00.644Z,1509704160.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:00.707Z,1509704160.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:01.032Z,1509704161.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:01.135Z,1509704161.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:01.457Z,1509704161.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:01.553Z,1509704161.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:01.836Z,1509704161.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:01.869Z,1509704161.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:02.222Z,1509704162.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:02.291Z,1509704162.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:02.662Z,1509704162.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:02.710Z,1509704162.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:03.043Z,1509704163.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:03.119Z,1509704163.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:03.443Z,1509704163.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:03.502Z,1509704163.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:03.851Z,1509704163.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:03.875Z,1509704163.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:04.221Z,1509704164.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:04.274Z,1509704164.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:04.500Z,1509704164.500 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:16:04.500Z,1509704164.500 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T10:16:04.501Z,1509704164.501 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:16:04.621Z,1509704164.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:04.650Z,1509704164.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:16:04.652Z,1509704164.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:04.753Z,1509704164.753 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:16:04.905Z,1509704164.905 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:16:05.022Z,1509704165.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:05.129Z,1509704165.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:16:05.130Z,1509704165.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:05.271Z,1509704165.271 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:16:05.447Z,1509704165.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:05.515Z,1509704165.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:16:05.516Z,1509704165.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:05.823Z,1509704165.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:05.859Z,1509704165.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:16:05.865Z,1509704165.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:06.259Z,1509704166.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:06.282Z,1509704166.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:16:06.283Z,1509704166.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:06.635Z,1509704166.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:06.674Z,1509704166.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:16:06.675Z,1509704166.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:06.785Z,1509704166.785 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:16:06.785Z,1509704166.785 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T10:16:06.885Z,1509704166.885 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:16:06.885Z,1509704166.885 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:16:06.885Z,1509704166.885 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:16:06.885Z,1509704166.885 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:16:07.031Z,1509704167.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:07.067Z,1509704167.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:16:07.068Z,1509704167.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:07.421Z,1509704167.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:07.440Z,1509704167.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:16:07.465Z,1509704167.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:07.856Z,1509704167.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:07.886Z,1509704167.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:16:07.887Z,1509704167.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:08.228Z,1509704168.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:08.243Z,1509704168.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:16:08.244Z,1509704168.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:08.624Z,1509704168.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:08.639Z,1509704168.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:16:08.640Z,1509704168.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:09.037Z,1509704169.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:09.068Z,1509704169.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:16:09.070Z,1509704169.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:09.438Z,1509704169.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:09.477Z,1509704169.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:16:09.478Z,1509704169.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:09.837Z,1509704169.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:09.868Z,1509704169.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:16:09.869Z,1509704169.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:10.224Z,1509704170.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:10.238Z,1509704170.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:16:10.239Z,1509704170.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:10.624Z,1509704170.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:10.646Z,1509704170.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:16:10.647Z,1509704170.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:11.034Z,1509704171.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:11.074Z,1509704171.074 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:16:11.094Z,1509704171.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:16:11.096Z,1509704171.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:11.251Z,1509704171.251 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:16:11.253Z,1509704171.253 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:16:11.253Z,1509704171.253 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:16:11.254Z,1509704171.254 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:16:11.431Z,1509704171.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:11.450Z,1509704171.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:16:11.452Z,1509704171.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:11.828Z,1509704171.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:11.844Z,1509704171.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:12.240Z,1509704172.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:12.271Z,1509704172.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:12.643Z,1509704172.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:12.691Z,1509704172.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:13.040Z,1509704173.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:13.060Z,1509704173.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:13.445Z,1509704173.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:13.474Z,1509704173.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:13.821Z,1509704173.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:13.874Z,1509704173.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:14.246Z,1509704174.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:14.275Z,1509704174.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:14.645Z,1509704174.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:14.674Z,1509704174.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:15.055Z,1509704175.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:15.106Z,1509704175.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:15.443Z,1509704175.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:15.515Z,1509704175.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:15.832Z,1509704175.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:15.915Z,1509704175.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:16.229Z,1509704176.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:16.289Z,1509704176.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:16.628Z,1509704176.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:16.691Z,1509704176.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:17.026Z,1509704177.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:17.041Z,1509704177.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:17.430Z,1509704177.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:17.479Z,1509704177.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:17.829Z,1509704177.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:17.879Z,1509704177.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:18.276Z,1509704178.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:18.346Z,1509704178.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:18.641Z,1509704178.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:18.674Z,1509704178.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:19.034Z,1509704179.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:19.049Z,1509704179.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:19.427Z,1509704179.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:19.442Z,1509704179.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:19.827Z,1509704179.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:19.841Z,1509704179.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:20.229Z,1509704180.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:20.245Z,1509704180.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:20.662Z,1509704180.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:20.691Z,1509704180.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:21.038Z,1509704181.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:21.060Z,1509704181.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:21.437Z,1509704181.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:21.453Z,1509704181.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:21.836Z,1509704181.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:21.852Z,1509704181.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:22.230Z,1509704182.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:22.245Z,1509704182.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:22.674Z,1509704182.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:22.694Z,1509704182.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:23.024Z,1509704183.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:23.044Z,1509704183.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:23.440Z,1509704183.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:23.455Z,1509704183.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:23.829Z,1509704183.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:23.845Z,1509704183.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:24.237Z,1509704184.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:24.253Z,1509704184.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:24.681Z,1509704184.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:24.702Z,1509704184.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:25.040Z,1509704185.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:25.055Z,1509704185.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:25.433Z,1509704185.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:25.449Z,1509704185.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:25.834Z,1509704185.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:25.849Z,1509704185.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:26.234Z,1509704186.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:26.250Z,1509704186.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:26.653Z,1509704186.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:26.701Z,1509704186.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:27.039Z,1509704187.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:27.055Z,1509704187.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:27.438Z,1509704187.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:27.454Z,1509704187.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:27.884Z,1509704187.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:27.901Z,1509704187.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:28.233Z,1509704188.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:28.249Z,1509704188.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:28.668Z,1509704188.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:28.722Z,1509704188.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:29.022Z,1509704189.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:29.050Z,1509704189.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:29.425Z,1509704189.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:29.490Z,1509704189.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:32.607Z,1509704192.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:32.671Z,1509704192.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:32.815Z,1509704192.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:32.831Z,1509704192.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:33.229Z,1509704193.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:33.259Z,1509704193.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:33.621Z,1509704193.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:33.675Z,1509704193.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:34.006Z,1509704194.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:34.023Z,1509704194.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:34.408Z,1509704194.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:34.458Z,1509704194.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:34.802Z,1509704194.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:34.858Z,1509704194.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:35.210Z,1509704195.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:35.230Z,1509704195.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:35.611Z,1509704195.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:35.631Z,1509704195.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:36.012Z,1509704196.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:36.027Z,1509704196.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:36.407Z,1509704196.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:36.423Z,1509704196.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:36.805Z,1509704196.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:36.827Z,1509704196.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:37.207Z,1509704197.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:37.224Z,1509704197.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:37.608Z,1509704197.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:37.623Z,1509704197.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:38.013Z,1509704198.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:38.028Z,1509704198.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:38.409Z,1509704198.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:38.425Z,1509704198.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:38.811Z,1509704198.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:38.831Z,1509704198.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:39.210Z,1509704199.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:39.226Z,1509704199.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:39.611Z,1509704199.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:39.627Z,1509704199.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:40.004Z,1509704200.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:40.024Z,1509704200.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:40.405Z,1509704200.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:40.422Z,1509704200.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:40.810Z,1509704200.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:40.826Z,1509704200.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:41.212Z,1509704201.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:41.228Z,1509704201.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:41.613Z,1509704201.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:41.628Z,1509704201.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:42.014Z,1509704202.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:42.029Z,1509704202.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:42.410Z,1509704202.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:42.425Z,1509704202.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:42.812Z,1509704202.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:42.827Z,1509704202.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:43.206Z,1509704203.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:43.235Z,1509704203.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:43.611Z,1509704203.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:43.628Z,1509704203.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:44.022Z,1509704204.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:44.042Z,1509704204.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:44.414Z,1509704204.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:44.431Z,1509704204.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:44.834Z,1509704204.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:44.885Z,1509704204.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:45.210Z,1509704205.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:45.231Z,1509704205.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:45.609Z,1509704205.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:45.618Z,1509704205.618 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:16:45.619Z,1509704205.619 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:16:45.619Z,1509704205.619 [BPC1](ERROR): Data Fault
2017-11-03T10:16:45.627Z,1509704205.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:45.721Z,1509704205.721 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:16:46.010Z,1509704206.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:46.026Z,1509704206.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:46.407Z,1509704206.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:46.426Z,1509704206.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:46.792Z,1509704206.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:46.842Z,1509704206.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:46.956Z,1509704206.956 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:16:46.957Z,1509704206.957 [BPC1] No Fault, FailCount= 1
2017-11-03T10:16:47.194Z,1509704207.194 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T10:16:47.195Z,1509704207.195 [NAL9602] Data Fault, FailCount= 5
2017-11-03T10:16:47.195Z,1509704207.195 [NAL9602](ERROR): Data Fault
2017-11-03T10:16:47.238Z,1509704207.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:47.245Z,1509704207.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x17675 got:0x16863
2017-11-03T10:16:47.319Z,1509704207.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:47.413Z,1509704207.413 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T10:16:47.413Z,1509704207.413 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-03T10:16:47.585Z,1509704207.585 [NAL9602](INFO): Powering down
2017-11-03T10:16:47.618Z,1509704207.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:47.633Z,1509704207.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:47.723Z,1509704207.723 [CBIT](INFO): Critical error at 20171103T101647
2017-11-03T10:16:48.006Z,1509704208.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:48.021Z,1509704208.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:48.393Z,1509704208.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:48.461Z,1509704208.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:48.807Z,1509704208.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:48.814Z,1509704208.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x27720 got:0x1857
2017-11-03T10:16:48.843Z,1509704208.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:49.219Z,1509704209.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:49.246Z,1509704209.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:49.607Z,1509704209.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:49.622Z,1509704209.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:49.996Z,1509704209.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:50.026Z,1509704210.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:50.410Z,1509704210.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:50.431Z,1509704210.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:50.793Z,1509704210.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:50.822Z,1509704210.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:51.205Z,1509704211.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:51.223Z,1509704211.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:51.610Z,1509704211.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:51.626Z,1509704211.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:51.993Z,1509704211.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:52.027Z,1509704212.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:52.409Z,1509704212.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:52.423Z,1509704212.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:52.796Z,1509704212.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:52.821Z,1509704212.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:53.191Z,1509704213.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:53.227Z,1509704213.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:53.608Z,1509704213.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:53.615Z,1509704213.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x31069 got:0x7106
2017-11-03T10:16:53.643Z,1509704213.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:54.008Z,1509704214.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:54.023Z,1509704214.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:54.402Z,1509704214.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:54.417Z,1509704214.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:54.803Z,1509704214.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:54.825Z,1509704214.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:55.201Z,1509704215.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:55.229Z,1509704215.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:55.608Z,1509704215.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:55.623Z,1509704215.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:56.005Z,1509704216.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:56.020Z,1509704216.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:56.410Z,1509704216.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:56.426Z,1509704216.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:56.797Z,1509704216.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:56.823Z,1509704216.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:57.208Z,1509704217.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:57.224Z,1509704217.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:57.613Z,1509704217.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:57.638Z,1509704217.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:58.010Z,1509704218.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:58.025Z,1509704218.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:58.406Z,1509704218.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:58.425Z,1509704218.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:58.811Z,1509704218.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:58.889Z,1509704218.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:59.195Z,1509704219.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:59.226Z,1509704219.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:59.596Z,1509704219.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:16:59.621Z,1509704219.621 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T10:16:59.621Z,1509704219.621 [BPC1] Data Fault, FailCount= 2
2017-11-03T10:16:59.621Z,1509704219.621 [BPC1](ERROR): Data Fault
2017-11-03T10:16:59.643Z,1509704219.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:16:59.768Z,1509704219.768 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:16:59.994Z,1509704219.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:00.026Z,1509704220.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:00.398Z,1509704220.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:00.431Z,1509704220.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:00.797Z,1509704220.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:00.823Z,1509704220.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:00.917Z,1509704220.917 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:17:00.917Z,1509704220.917 [BPC1] No Fault, FailCount= 2
2017-11-03T10:17:01.220Z,1509704221.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:01.291Z,1509704221.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:01.601Z,1509704221.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:01.635Z,1509704221.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:02.001Z,1509704222.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:02.031Z,1509704222.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:02.396Z,1509704222.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:02.451Z,1509704222.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:02.795Z,1509704222.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:02.824Z,1509704222.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:03.228Z,1509704223.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:03.235Z,1509704223.235 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-11-03T10:17:03.271Z,1509704223.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:03.602Z,1509704223.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:03.628Z,1509704223.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:03.997Z,1509704223.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:04.023Z,1509704224.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:04.397Z,1509704224.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:04.428Z,1509704224.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:04.802Z,1509704224.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:04.817Z,1509704224.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:05.207Z,1509704225.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:05.222Z,1509704225.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:05.600Z,1509704225.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:05.615Z,1509704225.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:05.999Z,1509704225.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:06.038Z,1509704226.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:06.401Z,1509704226.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:06.407Z,1509704226.407 [PNI_TCM](ERROR): CRC does not match. Expected:0x1270 got:0x1857
2017-11-03T10:17:06.442Z,1509704226.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:06.807Z,1509704226.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:06.844Z,1509704226.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:07.200Z,1509704227.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:07.216Z,1509704227.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:07.598Z,1509704227.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:07.638Z,1509704227.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:08.001Z,1509704228.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:08.008Z,1509704228.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x44426 got:0x1857
2017-11-03T10:17:08.046Z,1509704228.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:08.396Z,1509704228.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:08.424Z,1509704228.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:08.810Z,1509704228.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:08.843Z,1509704228.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:09.199Z,1509704229.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:09.246Z,1509704229.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:09.601Z,1509704229.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:09.607Z,1509704229.607 [PNI_TCM](ERROR): CRC does not match. Expected:0x50291 got:0x1857
2017-11-03T10:17:09.642Z,1509704229.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:10.007Z,1509704230.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:10.022Z,1509704230.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:10.400Z,1509704230.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:10.423Z,1509704230.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:10.800Z,1509704230.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:10.843Z,1509704230.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:11.201Z,1509704231.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:11.208Z,1509704231.208 [PNI_TCM](ERROR): CRC does not match. Expected:0x362 got:0x1857
2017-11-03T10:17:11.242Z,1509704231.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:11.603Z,1509704231.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:11.618Z,1509704231.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:12.000Z,1509704232.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:12.016Z,1509704232.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:12.398Z,1509704232.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:12.442Z,1509704232.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:12.805Z,1509704232.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:12.851Z,1509704232.851 [PNI_TCM](ERROR): CRC does not match. Expected:0x21763 got:0x1857
2017-11-03T10:17:12.907Z,1509704232.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:13.203Z,1509704233.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:13.223Z,1509704233.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:13.603Z,1509704233.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:13.617Z,1509704233.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:13.000Z,1509704234.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:14.043Z,1509704234.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:14.402Z,1509704234.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:14.409Z,1509704234.409 [PNI_TCM](ERROR): CRC does not match. Expected:0x38654 got:0x1857
2017-11-03T10:17:14.463Z,1509704234.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:14.801Z,1509704234.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:14.857Z,1509704234.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:15.216Z,1509704235.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:15.247Z,1509704235.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:15.600Z,1509704235.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:15.644Z,1509704235.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:16.006Z,1509704236.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:16.012Z,1509704236.012 [PNI_TCM](ERROR): CRC does not match. Expected:0x15349 got:0x1857
2017-11-03T10:17:16.063Z,1509704236.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:16.409Z,1509704236.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:16.424Z,1509704236.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:16.814Z,1509704236.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:16.871Z,1509704236.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:17.209Z,1509704237.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:17.259Z,1509704237.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:17.606Z,1509704237.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:17.622Z,1509704237.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:18.023Z,1509704238.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:18.052Z,1509704238.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:18.409Z,1509704238.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:18.425Z,1509704238.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:18.809Z,1509704238.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:18.825Z,1509704238.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:19.211Z,1509704239.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:19.226Z,1509704239.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:19.612Z,1509704239.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:19.627Z,1509704239.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:20.006Z,1509704240.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:20.027Z,1509704240.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:20.403Z,1509704240.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:20.531Z,1509704240.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:20.808Z,1509704240.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:20.814Z,1509704240.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x42925 got:0x16863
2017-11-03T10:17:20.842Z,1509704240.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:21.206Z,1509704241.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:21.226Z,1509704241.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:21.606Z,1509704241.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:21.622Z,1509704241.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:22.010Z,1509704242.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:22.025Z,1509704242.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:22.402Z,1509704242.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:22.420Z,1509704242.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:22.804Z,1509704242.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:22.820Z,1509704242.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:23.202Z,1509704243.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:23.219Z,1509704243.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:23.607Z,1509704243.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:23.624Z,1509704243.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:24.002Z,1509704244.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:24.017Z,1509704244.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:24.409Z,1509704244.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:24.424Z,1509704244.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:24.803Z,1509704244.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:24.823Z,1509704244.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:25.208Z,1509704245.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:25.224Z,1509704245.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:25.608Z,1509704245.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:25.627Z,1509704245.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:26.004Z,1509704246.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:26.026Z,1509704246.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:26.405Z,1509704246.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:26.420Z,1509704246.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:26.822Z,1509704246.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:26.901Z,1509704246.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:27.209Z,1509704247.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:27.224Z,1509704247.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:27.609Z,1509704247.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:27.624Z,1509704247.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:28.005Z,1509704248.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:28.020Z,1509704248.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:28.406Z,1509704248.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:28.422Z,1509704248.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:28.809Z,1509704248.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:28.824Z,1509704248.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:29.218Z,1509704249.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:29.272Z,1509704249.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:29.606Z,1509704249.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:29.670Z,1509704249.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:32.878Z,1509704252.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:32.907Z,1509704252.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:33.035Z,1509704253.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:33.083Z,1509704253.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:33.446Z,1509704253.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:33.467Z,1509704253.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:33.834Z,1509704253.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:33.898Z,1509704253.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:34.246Z,1509704254.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:34.260Z,1509704254.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:34.673Z,1509704254.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:34.731Z,1509704254.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:35.034Z,1509704255.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:35.098Z,1509704255.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:35.445Z,1509704255.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:35.460Z,1509704255.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:35.847Z,1509704255.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:35.867Z,1509704255.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:36.246Z,1509704256.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:36.261Z,1509704256.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:36.655Z,1509704256.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:36.717Z,1509704256.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:37.036Z,1509704257.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:37.062Z,1509704257.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:37.432Z,1509704257.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:37.466Z,1509704257.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:37.838Z,1509704257.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:37.863Z,1509704257.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:38.236Z,1509704258.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:38.261Z,1509704258.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:38.685Z,1509704258.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:38.718Z,1509704258.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:39.036Z,1509704259.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:39.051Z,1509704259.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:39.442Z,1509704259.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:39.459Z,1509704259.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:39.836Z,1509704259.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:39.851Z,1509704259.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:40.237Z,1509704260.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:40.252Z,1509704260.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:40.639Z,1509704260.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:40.659Z,1509704260.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:41.042Z,1509704261.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:41.059Z,1509704261.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:41.437Z,1509704261.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:41.451Z,1509704261.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:41.843Z,1509704261.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:41.859Z,1509704261.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:42.235Z,1509704262.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:42.252Z,1509704262.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:42.642Z,1509704262.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:42.657Z,1509704262.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:43.036Z,1509704263.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:43.052Z,1509704263.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:43.442Z,1509704263.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:43.459Z,1509704263.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:43.845Z,1509704263.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:43.861Z,1509704263.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:44.246Z,1509704264.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:44.262Z,1509704264.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:44.646Z,1509704264.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:44.662Z,1509704264.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:45.045Z,1509704265.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:45.060Z,1509704265.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:45.434Z,1509704265.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:45.466Z,1509704265.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:45.838Z,1509704265.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:45.865Z,1509704265.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:46.238Z,1509704266.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:46.264Z,1509704266.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:46.638Z,1509704266.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:46.686Z,1509704266.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:47.038Z,1509704267.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:47.119Z,1509704267.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:47.435Z,1509704267.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:47.465Z,1509704267.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:47.840Z,1509704267.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:47.943Z,1509704267.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:48.238Z,1509704268.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:48.264Z,1509704268.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:48.659Z,1509704268.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:48.719Z,1509704268.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:49.031Z,1509704269.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:49.079Z,1509704269.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:49.438Z,1509704269.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:49.464Z,1509704269.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:49.830Z,1509704269.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:49.865Z,1509704269.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:50.238Z,1509704270.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:50.263Z,1509704270.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:50.657Z,1509704270.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:50.709Z,1509704270.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:51.036Z,1509704271.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:51.065Z,1509704271.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:51.432Z,1509704271.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:51.467Z,1509704271.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:51.838Z,1509704271.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:51.863Z,1509704271.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:52.238Z,1509704272.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:52.263Z,1509704272.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:52.695Z,1509704272.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:52.721Z,1509704272.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:53.036Z,1509704273.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:53.069Z,1509704273.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:53.436Z,1509704273.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:53.466Z,1509704273.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:53.844Z,1509704273.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:53.872Z,1509704273.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:54.230Z,1509704274.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:54.261Z,1509704274.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:54.631Z,1509704274.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:54.646Z,1509704274.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:55.039Z,1509704275.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:55.053Z,1509704275.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:55.434Z,1509704275.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:55.450Z,1509704275.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:55.834Z,1509704275.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:55.849Z,1509704275.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:56.238Z,1509704276.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:56.259Z,1509704276.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:56.635Z,1509704276.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:56.650Z,1509704276.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:57.034Z,1509704277.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:57.055Z,1509704277.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:57.443Z,1509704277.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:57.458Z,1509704277.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:57.843Z,1509704277.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:57.863Z,1509704277.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:58.243Z,1509704278.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:58.258Z,1509704278.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:58.643Z,1509704278.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:58.663Z,1509704278.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:59.043Z,1509704279.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:59.058Z,1509704279.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:59.453Z,1509704279.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:59.469Z,1509704279.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:17:59.845Z,1509704279.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:17:59.863Z,1509704279.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:00.246Z,1509704280.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:00.262Z,1509704280.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:00.648Z,1509704280.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:00.683Z,1509704280.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:01.032Z,1509704281.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:01.057Z,1509704281.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:01.443Z,1509704281.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:01.518Z,1509704281.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:01.838Z,1509704281.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:01.871Z,1509704281.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:02.238Z,1509704282.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:02.287Z,1509704282.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:02.656Z,1509704282.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:02.687Z,1509704282.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:03.036Z,1509704283.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:03.091Z,1509704283.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:03.438Z,1509704283.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:03.488Z,1509704283.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:03.838Z,1509704283.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:03.864Z,1509704283.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:04.234Z,1509704284.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:04.259Z,1509704284.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:04.659Z,1509704284.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:04.711Z,1509704284.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:05.036Z,1509704285.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:05.071Z,1509704285.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:05.436Z,1509704285.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:05.481Z,1509704285.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:05.838Z,1509704285.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:05.869Z,1509704285.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:06.236Z,1509704286.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:06.270Z,1509704286.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:06.694Z,1509704286.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:06.734Z,1509704286.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:07.031Z,1509704287.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:07.046Z,1509704287.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:07.438Z,1509704287.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:07.469Z,1509704287.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:07.524Z,1509704287.524 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:18:07.524Z,1509704287.524 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T10:18:07.525Z,1509704287.525 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:18:07.563Z,1509704287.563 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:18:07.838Z,1509704287.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:07.869Z,1509704287.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:18:07.870Z,1509704287.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:07.930Z,1509704287.930 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:18:08.041Z,1509704288.041 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:18:08.235Z,1509704288.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:08.270Z,1509704288.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:18:08.271Z,1509704288.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:08.638Z,1509704288.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:08.669Z,1509704288.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:18:08.670Z,1509704288.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:09.036Z,1509704289.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:09.067Z,1509704289.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:18:09.073Z,1509704289.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:09.436Z,1509704289.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:09.471Z,1509704289.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:18:09.472Z,1509704289.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:09.552Z,1509704289.552 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:18:09.552Z,1509704289.552 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T10:18:09.656Z,1509704289.656 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:18:09.657Z,1509704289.657 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:18:09.657Z,1509704289.657 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:18:09.657Z,1509704289.657 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:18:09.838Z,1509704289.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:09.869Z,1509704289.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:18:09.871Z,1509704289.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:10.236Z,1509704290.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:10.267Z,1509704290.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:18:10.272Z,1509704290.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:10.638Z,1509704290.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:10.669Z,1509704290.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:18:10.670Z,1509704290.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:11.036Z,1509704291.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:11.051Z,1509704291.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:18:11.052Z,1509704291.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:11.436Z,1509704291.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:11.451Z,1509704291.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:18:11.452Z,1509704291.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:11.835Z,1509704291.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:11.849Z,1509704291.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:18:11.850Z,1509704291.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:12.242Z,1509704292.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:12.275Z,1509704292.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:18:12.276Z,1509704292.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:12.636Z,1509704292.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:12.651Z,1509704292.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:18:12.652Z,1509704292.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:13.036Z,1509704293.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:13.077Z,1509704293.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:18:13.078Z,1509704293.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:13.436Z,1509704293.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:13.451Z,1509704293.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:18:13.452Z,1509704293.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:13.784Z,1509704293.784 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:18:13.853Z,1509704293.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:13.899Z,1509704293.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:18:13.900Z,1509704293.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:13.903Z,1509704293.903 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:18:13.904Z,1509704293.904 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:18:13.905Z,1509704293.905 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:18:13.906Z,1509704293.906 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:18:14.250Z,1509704294.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:14.266Z,1509704294.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:18:14.267Z,1509704294.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:14.644Z,1509704294.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:14.660Z,1509704294.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:15.044Z,1509704295.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:15.060Z,1509704295.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:15.445Z,1509704295.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:15.523Z,1509704295.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:15.841Z,1509704295.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:15.857Z,1509704295.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:16.247Z,1509704296.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:16.299Z,1509704296.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:16.647Z,1509704296.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:16.662Z,1509704296.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:17.046Z,1509704297.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:17.095Z,1509704297.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:17.442Z,1509704297.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:17.496Z,1509704297.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:17.847Z,1509704297.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:17.862Z,1509704297.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:18.247Z,1509704298.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:18.286Z,1509704298.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:18.647Z,1509704298.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:18.667Z,1509704298.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:19.045Z,1509704299.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:19.059Z,1509704299.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:19.448Z,1509704299.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:19.463Z,1509704299.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:19.846Z,1509704299.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:19.861Z,1509704299.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:20.247Z,1509704300.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:20.261Z,1509704300.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:20.644Z,1509704300.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:20.660Z,1509704300.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:21.043Z,1509704301.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:21.059Z,1509704301.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:21.441Z,1509704301.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:21.457Z,1509704301.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:21.847Z,1509704301.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:21.863Z,1509704301.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:22.241Z,1509704302.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:22.290Z,1509704302.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:22.646Z,1509704302.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:22.661Z,1509704302.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:23.046Z,1509704303.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:23.062Z,1509704303.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:23.442Z,1509704303.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:23.462Z,1509704303.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:23.851Z,1509704303.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:23.880Z,1509704303.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:24.239Z,1509704304.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:24.254Z,1509704304.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:24.644Z,1509704304.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:24.659Z,1509704304.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:25.045Z,1509704305.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:25.060Z,1509704305.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:25.437Z,1509704305.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:25.453Z,1509704305.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:25.841Z,1509704305.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:25.857Z,1509704305.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:26.243Z,1509704306.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:26.258Z,1509704306.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:26.645Z,1509704306.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:26.661Z,1509704306.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:27.042Z,1509704307.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:27.057Z,1509704307.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:27.445Z,1509704307.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:27.460Z,1509704307.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:27.841Z,1509704307.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:27.857Z,1509704307.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:27.857Z,1509704307.857 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 201
2017-11-03T10:18:27.857Z,1509704307.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:18:27.858Z,1509704307.858 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:27.859Z,1509704307.859 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 201
2017-11-03T10:18:27.859Z,1509704307.859 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:18:27.861Z,1509704307.861 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:27.861Z,1509704307.861 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 201
2017-11-03T10:18:27.861Z,1509704307.861 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:18:27.981Z,1509704307.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:18:27.981Z,1509704307.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:18:27.981Z,1509704307.981 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:18:28.236Z,1509704308.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:28.252Z,1509704308.252 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T10:13:28.2Z
2017-11-03T10:18:28.252Z,1509704308.252 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T10:18:28.252Z,1509704308.252 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T10:18:28.348Z,1509704308.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:18:28.348Z,1509704308.348 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 201
2017-11-03T10:18:28.349Z,1509704308.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:18:28.349Z,1509704308.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 201
2017-11-03T10:18:28.349Z,1509704308.349 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:18:28.349Z,1509704308.349 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 201
2017-11-03T10:18:28.634Z,1509704308.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:28.661Z,1509704308.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:18:28.661Z,1509704308.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:18:28.662Z,1509704308.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:18:28.662Z,1509704308.662 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:18:28.662Z,1509704308.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:18:28.663Z,1509704308.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:18:28.663Z,1509704308.663 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:18:28.664Z,1509704308.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:18:28.664Z,1509704308.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:18:29.149Z,1509704309.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:29.174Z,1509704309.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:29.438Z,1509704309.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:29.479Z,1509704309.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:32.641Z,1509704312.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:32.697Z,1509704312.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:32.785Z,1509704312.785 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171103T001125/Courier0236.lzma
2017-11-03T10:18:32.817Z,1509704312.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:32.853Z,1509704312.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:33.210Z,1509704313.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:33.273Z,1509704313.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:33.601Z,1509704313.601 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0236.lzma.bak
2017-11-03T10:18:33.601Z,1509704313.601 [DataOverHttps](INFO): SBD MOMSN=5183323
2017-11-03T10:18:33.647Z,1509704313.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:33.680Z,1509704313.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:34.238Z,1509704314.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:34.299Z,1509704314.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:34.430Z,1509704314.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:34.445Z,1509704314.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:37.601Z,1509704317.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:37.651Z,1509704317.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:37.777Z,1509704317.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:37.811Z,1509704317.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:38.204Z,1509704318.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:38.240Z,1509704318.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:38.578Z,1509704318.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:38.593Z,1509704318.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:38.978Z,1509704318.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:38.999Z,1509704318.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:39.378Z,1509704319.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:39.400Z,1509704319.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:42.591Z,1509704322.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:42.607Z,1509704322.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:42.728Z,1509704322.728 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20171103T001125/Express0237.lzma
2017-11-03T10:18:42.749Z,1509704322.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:42.795Z,1509704322.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:43.146Z,1509704323.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:43.161Z,1509704323.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:43.522Z,1509704323.522 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0237.lzma.bak
2017-11-03T10:18:43.522Z,1509704323.522 [DataOverHttps](INFO): SBD MOMSN=5183326
2017-11-03T10:18:43.543Z,1509704323.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:43.557Z,1509704323.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:44.162Z,1509704324.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:44.191Z,1509704324.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:44.194Z,1509704324.194 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T10:18:44.194Z,1509704324.194 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T10:18:44.194Z,1509704324.194 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T10:18:44.350Z,1509704324.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:44.395Z,1509704324.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:47.628Z,1509704327.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:47.644Z,1509704327.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:47.749Z,1509704327.749 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T10:18:47.749Z,1509704327.749 [NAL9602] No Fault, FailCount= 5
2017-11-03T10:18:47.767Z,1509704327.767 [NAL9602](INFO): Powering up NAL9602
2017-11-03T10:18:47.834Z,1509704327.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:47.904Z,1509704327.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:48.194Z,1509704328.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:48.209Z,1509704328.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:48.595Z,1509704328.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:48.611Z,1509704328.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:48.995Z,1509704328.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:49.010Z,1509704329.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:49.395Z,1509704329.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:49.454Z,1509704329.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:49.793Z,1509704329.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:49.854Z,1509704329.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:50.210Z,1509704330.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:50.226Z,1509704330.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:50.595Z,1509704330.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:50.654Z,1509704330.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:50.996Z,1509704330.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:51.012Z,1509704331.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:51.393Z,1509704331.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:51.450Z,1509704331.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:51.794Z,1509704331.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:51.843Z,1509704331.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:52.216Z,1509704332.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:52.244Z,1509704332.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:52.579Z,1509704332.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:52.611Z,1509704332.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:52.995Z,1509704332.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:53.010Z,1509704333.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:53.397Z,1509704333.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:53.412Z,1509704333.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:53.794Z,1509704333.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:53.815Z,1509704333.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:54.194Z,1509704334.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:54.215Z,1509704334.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:54.589Z,1509704334.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:54.609Z,1509704334.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:54.988Z,1509704334.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:55.017Z,1509704335.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:55.396Z,1509704335.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:55.411Z,1509704335.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:55.783Z,1509704335.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:55.816Z,1509704335.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:56.180Z,1509704336.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:56.208Z,1509704336.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:56.584Z,1509704336.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:56.615Z,1509704336.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:56.986Z,1509704336.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:57.019Z,1509704337.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:57.380Z,1509704337.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:57.395Z,1509704337.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:57.795Z,1509704337.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:57.821Z,1509704337.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:58.193Z,1509704338.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:58.221Z,1509704338.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:58.564Z,1509704338.564 [NAL9602](INFO): NAL9602 initialized
2017-11-03T10:18:58.581Z,1509704338.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:58.596Z,1509704338.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:58.987Z,1509704338.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:59.030Z,1509704339.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:59.401Z,1509704339.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:59.427Z,1509704339.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:18:59.798Z,1509704339.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:18:59.818Z,1509704339.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:00.201Z,1509704340.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:00.231Z,1509704340.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:00.587Z,1509704340.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:00.602Z,1509704340.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:00.987Z,1509704340.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:01.003Z,1509704341.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:01.384Z,1509704341.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:01.400Z,1509704341.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:01.785Z,1509704341.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:01.801Z,1509704341.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:02.186Z,1509704342.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:02.217Z,1509704342.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:02.604Z,1509704342.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:02.620Z,1509704342.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:03.001Z,1509704343.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:03.016Z,1509704343.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:03.405Z,1509704343.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:03.421Z,1509704343.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:03.784Z,1509704343.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:03.875Z,1509704343.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:04.222Z,1509704344.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:04.237Z,1509704344.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:04.581Z,1509704344.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:04.635Z,1509704344.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:04.984Z,1509704344.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:05.019Z,1509704345.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:05.394Z,1509704345.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:05.439Z,1509704345.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:05.809Z,1509704345.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:05.863Z,1509704345.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:06.210Z,1509704346.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:06.230Z,1509704346.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:06.584Z,1509704346.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:06.599Z,1509704346.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:06.980Z,1509704346.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:06.996Z,1509704346.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:07.387Z,1509704347.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:07.422Z,1509704347.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:07.783Z,1509704347.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:07.844Z,1509704347.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:08.184Z,1509704348.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:08.200Z,1509704348.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:08.608Z,1509704348.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:08.624Z,1509704348.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:09.011Z,1509704349.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:09.026Z,1509704349.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:09.400Z,1509704349.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:09.416Z,1509704349.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:09.795Z,1509704349.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:09.815Z,1509704349.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:10.187Z,1509704350.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:10.201Z,1509704350.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:10.582Z,1509704350.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:10.597Z,1509704350.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:10.987Z,1509704350.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:11.007Z,1509704351.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:11.401Z,1509704351.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:11.417Z,1509704351.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:11.802Z,1509704351.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:11.823Z,1509704351.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:12.197Z,1509704352.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:12.213Z,1509704352.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:12.580Z,1509704352.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:12.595Z,1509704352.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:12.984Z,1509704352.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:12.000Z,1509704353.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:13.402Z,1509704353.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:13.418Z,1509704353.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:13.787Z,1509704353.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:13.807Z,1509704353.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:14.184Z,1509704354.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:14.200Z,1509704354.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:14.597Z,1509704354.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:14.613Z,1509704354.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:15.001Z,1509704355.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:15.023Z,1509704355.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:15.393Z,1509704355.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:15.409Z,1509704355.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:15.784Z,1509704355.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:15.800Z,1509704355.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:16.184Z,1509704356.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:16.226Z,1509704356.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:16.584Z,1509704356.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:16.599Z,1509704356.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:16.983Z,1509704356.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:16.999Z,1509704356.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:17.414Z,1509704357.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:17.443Z,1509704357.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:17.798Z,1509704357.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:17.882Z,1509704357.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:18.208Z,1509704358.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:18.224Z,1509704358.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:18.587Z,1509704358.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:18.613Z,1509704358.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:18.984Z,1509704358.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:19.049Z,1509704359.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:19.387Z,1509704359.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:19.412Z,1509704359.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:19.788Z,1509704359.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:19.850Z,1509704359.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:20.201Z,1509704360.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:20.258Z,1509704360.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:20.605Z,1509704360.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:20.621Z,1509704360.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:21.006Z,1509704361.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:21.021Z,1509704361.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:21.405Z,1509704361.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:21.421Z,1509704361.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:21.783Z,1509704361.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:21.809Z,1509704361.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:22.187Z,1509704362.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:22.214Z,1509704362.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:22.585Z,1509704362.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:22.611Z,1509704362.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:22.984Z,1509704362.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:23.010Z,1509704363.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:23.401Z,1509704363.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:23.416Z,1509704363.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:23.805Z,1509704363.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:23.820Z,1509704363.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:24.205Z,1509704364.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:24.220Z,1509704364.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:24.585Z,1509704364.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:24.611Z,1509704364.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:24.984Z,1509704364.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:25.010Z,1509704365.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:25.384Z,1509704365.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:25.410Z,1509704365.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:25.784Z,1509704365.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:25.810Z,1509704365.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:26.184Z,1509704366.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:26.210Z,1509704366.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:26.605Z,1509704366.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:26.627Z,1509704366.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:27.010Z,1509704367.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:27.024Z,1509704367.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:27.406Z,1509704367.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:27.421Z,1509704367.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:27.783Z,1509704367.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:27.810Z,1509704367.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:28.185Z,1509704368.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:28.221Z,1509704368.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:28.588Z,1509704368.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:28.614Z,1509704368.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:28.984Z,1509704368.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:29.010Z,1509704369.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:29.406Z,1509704369.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:29.421Z,1509704369.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:29.806Z,1509704369.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:29.883Z,1509704369.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:30.206Z,1509704370.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:30.221Z,1509704370.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:30.586Z,1509704370.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:30.622Z,1509704370.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:30.986Z,1509704370.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:31.041Z,1509704371.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:31.385Z,1509704371.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:31.419Z,1509704371.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:31.782Z,1509704371.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:31.818Z,1509704371.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:32.196Z,1509704372.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:32.282Z,1509704372.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:32.608Z,1509704372.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:32.624Z,1509704372.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:33.009Z,1509704373.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:33.025Z,1509704373.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:33.405Z,1509704373.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:33.465Z,1509704373.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:33.785Z,1509704373.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:33.818Z,1509704373.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:34.196Z,1509704374.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:34.267Z,1509704374.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:34.588Z,1509704374.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:34.639Z,1509704374.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:34.984Z,1509704374.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:35.022Z,1509704375.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:35.398Z,1509704375.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:35.426Z,1509704375.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:35.798Z,1509704375.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:35.825Z,1509704375.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:36.197Z,1509704376.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:36.224Z,1509704376.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:36.585Z,1509704376.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:36.620Z,1509704376.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:36.984Z,1509704376.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:36.999Z,1509704376.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:37.391Z,1509704377.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:37.424Z,1509704377.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:37.800Z,1509704377.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:37.826Z,1509704377.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:38.184Z,1509704378.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:38.199Z,1509704378.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:38.601Z,1509704378.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:38.631Z,1509704378.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:38.997Z,1509704378.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:39.023Z,1509704379.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:39.397Z,1509704379.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:39.421Z,1509704379.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:39.795Z,1509704379.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:39.824Z,1509704379.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:40.185Z,1509704380.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:40.200Z,1509704380.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:40.584Z,1509704380.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:40.600Z,1509704380.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:40.991Z,1509704380.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:41.024Z,1509704381.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:41.401Z,1509704381.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:41.425Z,1509704381.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:41.815Z,1509704381.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:41.831Z,1509704381.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:42.201Z,1509704382.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:42.231Z,1509704382.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:42.585Z,1509704382.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:42.600Z,1509704382.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:42.984Z,1509704382.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:42.000Z,1509704383.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:43.391Z,1509704383.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:43.423Z,1509704383.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:43.785Z,1509704383.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:43.801Z,1509704383.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:44.192Z,1509704384.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:44.207Z,1509704384.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:44.606Z,1509704384.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:44.637Z,1509704384.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:47.834Z,1509704387.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:47.927Z,1509704387.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:48.078Z,1509704388.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:48.138Z,1509704388.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:48.462Z,1509704388.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:48.477Z,1509704388.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:48.864Z,1509704388.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:48.919Z,1509704388.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:49.260Z,1509704389.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:49.275Z,1509704389.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:49.678Z,1509704389.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:49.745Z,1509704389.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:50.077Z,1509704390.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:50.147Z,1509704390.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:50.477Z,1509704390.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:50.507Z,1509704390.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:50.867Z,1509704390.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:50.901Z,1509704390.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:51.267Z,1509704391.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:51.302Z,1509704391.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:51.676Z,1509704391.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:51.705Z,1509704391.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:52.065Z,1509704392.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:52.080Z,1509704392.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:52.488Z,1509704392.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:52.504Z,1509704392.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:52.877Z,1509704392.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:52.907Z,1509704392.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:53.269Z,1509704393.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:53.305Z,1509704393.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:53.667Z,1509704393.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:53.707Z,1509704393.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:54.064Z,1509704394.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:54.087Z,1509704394.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:54.466Z,1509704394.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:54.481Z,1509704394.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:54.867Z,1509704394.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:54.882Z,1509704394.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:55.266Z,1509704395.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:55.281Z,1509704395.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:55.717Z,1509704395.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:55.763Z,1509704395.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:56.081Z,1509704396.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:56.113Z,1509704396.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:56.475Z,1509704396.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:56.490Z,1509704396.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:56.868Z,1509704396.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:56.884Z,1509704396.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:57.268Z,1509704397.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:57.284Z,1509704397.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:57.668Z,1509704397.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:57.685Z,1509704397.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:58.072Z,1509704398.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:58.089Z,1509704398.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:58.473Z,1509704398.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:58.495Z,1509704398.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:58.873Z,1509704398.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:58.890Z,1509704398.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:59.281Z,1509704399.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:59.314Z,1509704399.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:19:59.670Z,1509704399.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:19:59.685Z,1509704399.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:00.067Z,1509704400.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:00.082Z,1509704400.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:00.470Z,1509704400.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:00.490Z,1509704400.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:00.871Z,1509704400.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:00.886Z,1509704400.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:01.272Z,1509704401.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:01.327Z,1509704401.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:01.684Z,1509704401.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:01.699Z,1509704401.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:02.085Z,1509704402.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:02.142Z,1509704402.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:02.477Z,1509704402.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:02.499Z,1509704402.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:02.860Z,1509704402.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:02.883Z,1509704402.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:03.259Z,1509704403.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:03.274Z,1509704403.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:03.669Z,1509704403.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:03.701Z,1509704403.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:04.064Z,1509704404.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:04.080Z,1509704404.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:04.477Z,1509704404.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:04.514Z,1509704404.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:04.877Z,1509704404.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:04.909Z,1509704404.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:05.278Z,1509704405.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:05.286Z,1509704405.286 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:20:05.286Z,1509704405.286 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:20:05.286Z,1509704405.286 [BPC1](ERROR): Communications Fault
2017-11-03T10:20:05.314Z,1509704405.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:05.401Z,1509704405.401 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:20:05.685Z,1509704405.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:05.714Z,1509704405.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:06.072Z,1509704406.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:06.087Z,1509704406.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:06.468Z,1509704406.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:06.483Z,1509704406.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:06.568Z,1509704406.568 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:20:06.568Z,1509704406.568 [BPC1] No Fault, FailCount= 1
2017-11-03T10:20:06.874Z,1509704406.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:06.938Z,1509704406.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:07.264Z,1509704407.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:07.280Z,1509704407.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:07.697Z,1509704407.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:07.765Z,1509704407.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:08.078Z,1509704408.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:08.093Z,1509704408.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:08.476Z,1509704408.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:08.492Z,1509704408.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:08.872Z,1509704408.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:08.887Z,1509704408.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:09.271Z,1509704409.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:09.286Z,1509704409.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:09.731Z,1509704409.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:09.759Z,1509704409.759 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:20:09.759Z,1509704409.759 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T10:20:09.759Z,1509704409.759 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:20:09.782Z,1509704409.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2017-11-03T10:20:09.783Z,1509704409.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:09.892Z,1509704409.892 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:20:09.893Z,1509704409.893 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T10:20:10.063Z,1509704410.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:10.088Z,1509704410.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:20:10.089Z,1509704410.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:10.166Z,1509704410.166 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:20:10.270Z,1509704410.270 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:20:10.490Z,1509704410.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:10.506Z,1509704410.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:20:10.507Z,1509704410.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:10.881Z,1509704410.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:10.897Z,1509704410.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:20:10.898Z,1509704410.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:11.282Z,1509704411.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:11.297Z,1509704411.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:20:11.298Z,1509704411.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:11.661Z,1509704411.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:11.686Z,1509704411.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:20:11.688Z,1509704411.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:12.064Z,1509704412.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:12.090Z,1509704412.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:20:12.091Z,1509704412.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:12.460Z,1509704412.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:12.486Z,1509704412.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:20:12.487Z,1509704412.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:12.864Z,1509704412.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:12.889Z,1509704412.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:20:12.890Z,1509704412.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:13.263Z,1509704413.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:13.289Z,1509704413.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:20:13.290Z,1509704413.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:13.680Z,1509704413.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:13.702Z,1509704413.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:20:13.703Z,1509704413.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:14.085Z,1509704414.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:14.099Z,1509704414.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:20:14.100Z,1509704414.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:14.481Z,1509704414.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:14.497Z,1509704414.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:20:14.498Z,1509704414.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:14.860Z,1509704414.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:14.886Z,1509704414.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:20:14.887Z,1509704414.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:15.263Z,1509704415.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:15.289Z,1509704415.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:20:15.290Z,1509704415.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:15.664Z,1509704415.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:15.689Z,1509704415.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:20:15.691Z,1509704415.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:16.063Z,1509704416.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:16.088Z,1509704416.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:20:16.090Z,1509704416.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:16.482Z,1509704416.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:16.496Z,1509704416.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:20:16.497Z,1509704416.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:16.885Z,1509704416.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:16.899Z,1509704416.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:20:16.901Z,1509704416.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:17.281Z,1509704417.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:17.296Z,1509704417.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:20:17.297Z,1509704417.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:17.657Z,1509704417.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:17.690Z,1509704417.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:20:17.691Z,1509704417.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:18.063Z,1509704418.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:18.089Z,1509704418.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:20:18.090Z,1509704418.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:18.460Z,1509704418.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:18.510Z,1509704418.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:20:18.511Z,1509704418.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:18.864Z,1509704418.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:18.889Z,1509704418.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:20:18.890Z,1509704418.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:19.263Z,1509704419.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:19.289Z,1509704419.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:20:19.290Z,1509704419.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:19.681Z,1509704419.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:19.737Z,1509704419.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-03T10:20:19.739Z,1509704419.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:20.081Z,1509704420.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:20.095Z,1509704420.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:20:20.096Z,1509704420.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:20.481Z,1509704420.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:20.537Z,1509704420.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-03T10:20:20.539Z,1509704420.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:20.863Z,1509704420.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:20.931Z,1509704420.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:20:20.932Z,1509704420.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:21.261Z,1509704421.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:21.290Z,1509704421.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:20:21.291Z,1509704421.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:21.664Z,1509704421.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:21.689Z,1509704421.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:20:21.690Z,1509704421.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:22.063Z,1509704422.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:22.088Z,1509704422.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:20:22.089Z,1509704422.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:22.485Z,1509704422.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:22.506Z,1509704422.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:20:22.507Z,1509704422.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:22.877Z,1509704422.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:22.891Z,1509704422.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:20:22.893Z,1509704422.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:23.281Z,1509704423.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:23.302Z,1509704423.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:20:23.303Z,1509704423.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:23.663Z,1509704423.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:23.688Z,1509704423.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:20:23.689Z,1509704423.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:24.063Z,1509704424.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:24.089Z,1509704424.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:20:24.090Z,1509704424.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:24.460Z,1509704424.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:24.486Z,1509704424.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:20:24.487Z,1509704424.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:24.861Z,1509704424.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:24.887Z,1509704424.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T10:20:24.888Z,1509704424.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:25.263Z,1509704425.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:25.289Z,1509704425.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:20:25.290Z,1509704425.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:25.681Z,1509704425.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:25.696Z,1509704425.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T10:20:25.697Z,1509704425.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:26.085Z,1509704426.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:26.099Z,1509704426.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T10:20:26.101Z,1509704426.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:26.481Z,1509704426.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:26.496Z,1509704426.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T10:20:26.497Z,1509704426.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:26.860Z,1509704426.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:26.886Z,1509704426.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T10:20:26.887Z,1509704426.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:27.263Z,1509704427.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:27.289Z,1509704427.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T10:20:27.290Z,1509704427.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:27.661Z,1509704427.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:27.686Z,1509704427.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:20:27.687Z,1509704427.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:28.059Z,1509704428.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:28.086Z,1509704428.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T10:20:28.087Z,1509704428.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:28.486Z,1509704428.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:28.500Z,1509704428.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T10:20:28.502Z,1509704428.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:28.881Z,1509704428.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:28.896Z,1509704428.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T10:20:28.897Z,1509704428.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:29.282Z,1509704429.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:29.297Z,1509704429.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:29.661Z,1509704429.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:29.695Z,1509704429.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:30.063Z,1509704430.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:30.095Z,1509704430.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:30.462Z,1509704430.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:30.493Z,1509704430.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:30.858Z,1509704430.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:30.873Z,1509704430.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:31.261Z,1509704431.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:31.297Z,1509704431.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:31.673Z,1509704431.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:31.766Z,1509704431.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:32.074Z,1509704432.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:32.098Z,1509704432.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:32.474Z,1509704432.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:32.547Z,1509704432.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:32.870Z,1509704432.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:32.901Z,1509704432.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:33.260Z,1509704433.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:33.301Z,1509704433.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:33.662Z,1509704433.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:33.722Z,1509704433.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:34.061Z,1509704434.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:34.077Z,1509704434.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:34.474Z,1509704434.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:34.507Z,1509704434.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:34.874Z,1509704434.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:34.899Z,1509704434.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:35.274Z,1509704435.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:35.300Z,1509704435.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:35.660Z,1509704435.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:35.703Z,1509704435.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:36.061Z,1509704436.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:36.076Z,1509704436.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:36.460Z,1509704436.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:36.475Z,1509704436.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:36.861Z,1509704436.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:36.876Z,1509704436.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:37.265Z,1509704437.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:37.280Z,1509704437.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:37.687Z,1509704437.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:37.703Z,1509704437.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:38.073Z,1509704438.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:38.099Z,1509704438.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:38.473Z,1509704438.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:38.509Z,1509704438.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:38.865Z,1509704438.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:38.880Z,1509704438.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:39.260Z,1509704439.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:39.275Z,1509704439.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:39.661Z,1509704439.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:39.677Z,1509704439.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:40.064Z,1509704440.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:40.079Z,1509704440.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:40.482Z,1509704440.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:40.506Z,1509704440.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:40.882Z,1509704440.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:40.907Z,1509704440.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:41.278Z,1509704441.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:41.308Z,1509704441.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:41.664Z,1509704441.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:41.683Z,1509704441.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:42.064Z,1509704442.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:42.079Z,1509704442.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:42.467Z,1509704442.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:42.483Z,1509704442.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:42.860Z,1509704442.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:42.875Z,1509704442.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:43.260Z,1509704443.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:43.275Z,1509704443.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:43.677Z,1509704443.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:43.708Z,1509704443.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:44.073Z,1509704444.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:44.088Z,1509704444.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:44.478Z,1509704444.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:44.550Z,1509704444.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:44.869Z,1509704444.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:44.891Z,1509704444.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:47.941Z,1509704447.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:47.994Z,1509704447.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:48.140Z,1509704448.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:48.173Z,1509704448.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:48.558Z,1509704448.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:48.615Z,1509704448.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:48.969Z,1509704448.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:49.013Z,1509704449.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:49.362Z,1509704449.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:49.383Z,1509704449.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:49.737Z,1509704449.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:49.771Z,1509704449.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:50.143Z,1509704450.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:50.169Z,1509704450.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:50.544Z,1509704450.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:50.570Z,1509704450.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:50.943Z,1509704450.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:50.969Z,1509704450.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:51.366Z,1509704451.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:51.381Z,1509704451.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:51.766Z,1509704451.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:51.781Z,1509704451.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:52.162Z,1509704452.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:52.177Z,1509704452.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:52.543Z,1509704452.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:52.570Z,1509704452.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:52.937Z,1509704452.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:53.013Z,1509704453.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:53.387Z,1509704453.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:53.422Z,1509704453.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:53.764Z,1509704453.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:53.787Z,1509704453.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:54.160Z,1509704454.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:54.179Z,1509704454.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:54.565Z,1509704454.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:54.593Z,1509704454.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:54.949Z,1509704454.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:54.990Z,1509704454.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:55.371Z,1509704455.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:55.402Z,1509704455.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:55.775Z,1509704455.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:55.822Z,1509704455.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:56.181Z,1509704456.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:56.220Z,1509704456.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:56.552Z,1509704456.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:56.578Z,1509704456.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:56.978Z,1509704456.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:56.995Z,1509704456.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:57.371Z,1509704457.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:57.386Z,1509704457.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:57.768Z,1509704457.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:57.792Z,1509704457.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:58.160Z,1509704458.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:58.195Z,1509704458.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:58.549Z,1509704458.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:58.589Z,1509704458.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:58.943Z,1509704458.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:58.994Z,1509704458.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:59.360Z,1509704459.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:59.447Z,1509704459.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:20:59.759Z,1509704459.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:20:59.853Z,1509704459.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:00.156Z,1509704460.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:00.188Z,1509704460.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:00.550Z,1509704460.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:00.607Z,1509704460.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:00.953Z,1509704460.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:00.998Z,1509704460.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:01.356Z,1509704461.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:01.407Z,1509704461.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:01.763Z,1509704461.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:01.846Z,1509704461.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:02.174Z,1509704462.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:02.190Z,1509704462.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:02.563Z,1509704462.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:02.611Z,1509704462.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:02.949Z,1509704462.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:02.997Z,1509704462.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:03.363Z,1509704463.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:03.466Z,1509704463.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:03.759Z,1509704463.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:03.795Z,1509704463.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:04.159Z,1509704464.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:04.201Z,1509704464.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:04.550Z,1509704464.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:04.592Z,1509704464.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:04.946Z,1509704464.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:05.001Z,1509704465.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:05.359Z,1509704465.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:05.399Z,1509704465.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:05.763Z,1509704465.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:05.810Z,1509704465.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:06.159Z,1509704466.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:06.198Z,1509704466.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:06.550Z,1509704466.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:06.597Z,1509704466.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:06.958Z,1509704466.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:06.982Z,1509704466.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:07.360Z,1509704467.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:07.417Z,1509704467.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:07.766Z,1509704467.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:07.807Z,1509704467.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:08.167Z,1509704468.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:08.206Z,1509704468.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:08.550Z,1509704468.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:08.582Z,1509704468.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:08.958Z,1509704468.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:08.985Z,1509704468.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:09.370Z,1509704469.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:09.395Z,1509704469.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:09.784Z,1509704469.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:09.823Z,1509704469.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:10.167Z,1509704470.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:10.191Z,1509704470.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:10.559Z,1509704470.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:10.591Z,1509704470.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:10.975Z,1509704470.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:10.999Z,1509704470.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:11.368Z,1509704471.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:11.388Z,1509704471.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:11.782Z,1509704471.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:11.819Z,1509704471.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:12.182Z,1509704472.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:12.197Z,1509704472.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:12.545Z,1509704472.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:12.606Z,1509704472.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:12.951Z,1509704472.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:13.013Z,1509704473.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:13.354Z,1509704473.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:13.369Z,1509704473.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:13.765Z,1509704473.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:13.797Z,1509704473.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:14.157Z,1509704474.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:14.203Z,1509704474.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:14.549Z,1509704474.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:14.564Z,1509704474.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:14.950Z,1509704474.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:15.006Z,1509704475.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:15.357Z,1509704475.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:15.403Z,1509704475.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:15.753Z,1509704475.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:15.768Z,1509704475.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:16.158Z,1509704476.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:16.173Z,1509704476.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:16.554Z,1509704476.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:16.569Z,1509704476.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:16.951Z,1509704476.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:16.973Z,1509704476.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:17.355Z,1509704477.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:17.375Z,1509704477.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:17.754Z,1509704477.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:17.775Z,1509704477.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:18.158Z,1509704478.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:18.173Z,1509704478.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:18.554Z,1509704478.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:18.569Z,1509704478.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:18.954Z,1509704478.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:18.969Z,1509704478.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:19.354Z,1509704479.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:19.370Z,1509704479.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:19.755Z,1509704479.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:19.770Z,1509704479.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:20.158Z,1509704480.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:20.174Z,1509704480.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:20.554Z,1509704480.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:20.569Z,1509704480.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:20.951Z,1509704480.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:20.967Z,1509704480.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:21.359Z,1509704481.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:21.400Z,1509704481.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:21.759Z,1509704481.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:21.779Z,1509704481.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:22.153Z,1509704482.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:22.175Z,1509704482.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:22.551Z,1509704482.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:22.567Z,1509704482.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:22.950Z,1509704482.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:22.966Z,1509704482.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:23.354Z,1509704483.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:23.370Z,1509704483.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:23.757Z,1509704483.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:23.772Z,1509704483.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:24.154Z,1509704484.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:24.169Z,1509704484.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:24.551Z,1509704484.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:24.571Z,1509704484.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:24.950Z,1509704484.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:24.965Z,1509704484.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:25.354Z,1509704485.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:25.369Z,1509704485.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:25.757Z,1509704485.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:25.823Z,1509704485.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:26.161Z,1509704486.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:26.220Z,1509704486.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:26.552Z,1509704486.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:26.571Z,1509704486.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:26.951Z,1509704486.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:26.971Z,1509704486.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:27.361Z,1509704487.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:27.407Z,1509704487.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:27.760Z,1509704487.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:27.775Z,1509704487.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:28.160Z,1509704488.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:28.207Z,1509704488.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:28.552Z,1509704488.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:28.606Z,1509704488.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:28.955Z,1509704488.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:28.975Z,1509704488.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:28.975Z,1509704488.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 202
2017-11-03T10:21:28.975Z,1509704488.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:21:28.977Z,1509704488.977 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:28.977Z,1509704488.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 202
2017-11-03T10:21:28.977Z,1509704488.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:21:28.979Z,1509704488.979 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:28.979Z,1509704488.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 202
2017-11-03T10:21:28.979Z,1509704488.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:21:29.096Z,1509704489.096 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:21:29.097Z,1509704489.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:21:29.097Z,1509704489.097 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:21:29.365Z,1509704489.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:29.456Z,1509704489.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:21:29.457Z,1509704489.457 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 202
2017-11-03T10:21:29.457Z,1509704489.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:21:29.457Z,1509704489.457 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 202
2017-11-03T10:21:29.458Z,1509704489.458 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:21:29.458Z,1509704489.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 202
2017-11-03T10:21:29.755Z,1509704489.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:29.781Z,1509704489.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:21:29.782Z,1509704489.782 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:21:29.782Z,1509704489.782 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:21:29.783Z,1509704489.783 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:21:29.783Z,1509704489.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:21:29.783Z,1509704489.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:21:29.784Z,1509704489.784 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:21:29.784Z,1509704489.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:21:29.785Z,1509704489.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:21:30.158Z,1509704490.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:30.172Z,1509704490.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:21:30.173Z,1509704490.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:30.551Z,1509704490.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:30.566Z,1509704490.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:21:30.567Z,1509704490.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:30.951Z,1509704490.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:30.966Z,1509704490.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:21:30.966Z,1509704490.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:31.361Z,1509704491.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:31.376Z,1509704491.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:21:31.377Z,1509704491.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:31.764Z,1509704491.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:31.779Z,1509704491.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:21:31.780Z,1509704491.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:32.165Z,1509704492.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:32.179Z,1509704492.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:21:32.180Z,1509704492.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:32.551Z,1509704492.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:32.570Z,1509704492.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:21:32.571Z,1509704492.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:32.951Z,1509704492.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:32.970Z,1509704492.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:21:32.971Z,1509704492.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:33.365Z,1509704493.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:33.379Z,1509704493.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:21:33.380Z,1509704493.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:33.764Z,1509704493.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:33.779Z,1509704493.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:21:33.780Z,1509704493.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:34.161Z,1509704494.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:34.175Z,1509704494.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:21:34.177Z,1509704494.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:34.552Z,1509704494.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:34.566Z,1509704494.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:21:34.567Z,1509704494.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:34.952Z,1509704494.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:34.974Z,1509704494.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:21:34.975Z,1509704494.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:35.361Z,1509704495.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:35.375Z,1509704495.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:21:35.377Z,1509704495.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:35.765Z,1509704495.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:35.779Z,1509704495.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:21:35.780Z,1509704495.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:36.161Z,1509704496.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:36.176Z,1509704496.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:21:36.177Z,1509704496.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:36.552Z,1509704496.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:36.567Z,1509704496.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:21:36.568Z,1509704496.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:36.952Z,1509704496.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:36.967Z,1509704496.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:21:36.968Z,1509704496.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:37.364Z,1509704497.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:37.379Z,1509704497.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:21:37.381Z,1509704497.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:37.764Z,1509704497.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:37.779Z,1509704497.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:21:37.780Z,1509704497.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:38.165Z,1509704498.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:38.182Z,1509704498.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:21:38.183Z,1509704498.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:38.552Z,1509704498.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:38.567Z,1509704498.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:21:38.567Z,1509704498.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:38.951Z,1509704498.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:39.022Z,1509704499.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:21:39.023Z,1509704499.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:39.366Z,1509704499.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:39.380Z,1509704499.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:21:39.381Z,1509704499.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:39.765Z,1509704499.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:39.821Z,1509704499.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:21:39.822Z,1509704499.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:40.161Z,1509704500.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:40.176Z,1509704500.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:21:40.177Z,1509704500.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:40.556Z,1509704500.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:40.599Z,1509704500.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:21:40.600Z,1509704500.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:40.951Z,1509704500.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:41.002Z,1509704501.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:21:41.003Z,1509704501.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:41.356Z,1509704501.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:41.371Z,1509704501.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:21:41.372Z,1509704501.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:41.757Z,1509704501.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:41.778Z,1509704501.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:21:41.779Z,1509704501.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:42.158Z,1509704502.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:42.172Z,1509704502.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:21:42.173Z,1509704502.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:42.552Z,1509704502.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:42.567Z,1509704502.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:21:42.568Z,1509704502.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:42.951Z,1509704502.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:42.966Z,1509704502.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:21:42.967Z,1509704502.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:43.357Z,1509704503.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:43.372Z,1509704503.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:21:43.373Z,1509704503.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:43.756Z,1509704503.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:43.771Z,1509704503.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:21:43.772Z,1509704503.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:44.157Z,1509704504.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:44.171Z,1509704504.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:21:44.172Z,1509704504.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:44.553Z,1509704504.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:44.567Z,1509704504.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T10:21:44.568Z,1509704504.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:44.955Z,1509704504.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:44.970Z,1509704504.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:21:44.971Z,1509704504.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:48.078Z,1509704508.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:48.106Z,1509704508.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-03T10:21:48.107Z,1509704508.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:48.229Z,1509704508.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:48.270Z,1509704508.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T10:21:48.271Z,1509704508.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:48.645Z,1509704508.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:48.660Z,1509704508.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T10:21:48.661Z,1509704508.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:49.027Z,1509704509.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:49.053Z,1509704509.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:49.427Z,1509704509.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:49.452Z,1509704509.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:49.825Z,1509704509.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:49.851Z,1509704509.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:50.227Z,1509704510.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:50.253Z,1509704510.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:50.645Z,1509704510.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:50.661Z,1509704510.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:51.043Z,1509704511.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:51.063Z,1509704511.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:51.449Z,1509704511.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:51.512Z,1509704511.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:51.824Z,1509704511.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:51.879Z,1509704511.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:52.224Z,1509704512.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:52.254Z,1509704512.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:52.621Z,1509704512.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:52.667Z,1509704512.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:53.027Z,1509704513.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:53.052Z,1509704513.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:53.443Z,1509704513.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:53.502Z,1509704513.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:53.851Z,1509704513.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:53.891Z,1509704513.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:54.244Z,1509704514.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:54.259Z,1509704514.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:54.624Z,1509704514.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:54.655Z,1509704514.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:55.020Z,1509704515.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:55.055Z,1509704515.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:55.427Z,1509704515.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:55.453Z,1509704515.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:55.825Z,1509704515.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:55.852Z,1509704515.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:56.227Z,1509704516.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:56.252Z,1509704516.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:56.648Z,1509704516.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:56.663Z,1509704516.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:57.049Z,1509704517.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:57.064Z,1509704517.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:57.449Z,1509704517.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:57.470Z,1509704517.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:57.825Z,1509704517.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:57.853Z,1509704517.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:58.224Z,1509704518.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:58.254Z,1509704518.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:58.621Z,1509704518.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:58.654Z,1509704518.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:58.749Z,1509704518.749 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T10:21:59.024Z,1509704519.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:59.079Z,1509704519.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:59.445Z,1509704519.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:59.467Z,1509704519.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:21:59.845Z,1509704519.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:21:59.860Z,1509704519.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:00.245Z,1509704520.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:00.260Z,1509704520.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:00.624Z,1509704520.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:00.654Z,1509704520.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:01.020Z,1509704521.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:01.047Z,1509704521.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:01.423Z,1509704521.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:01.455Z,1509704521.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:01.826Z,1509704521.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:01.857Z,1509704521.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:02.224Z,1509704522.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:02.239Z,1509704522.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:02.653Z,1509704522.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:02.668Z,1509704522.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:03.034Z,1509704523.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:03.065Z,1509704523.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:03.437Z,1509704523.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:03.469Z,1509704523.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:03.825Z,1509704523.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:03.840Z,1509704523.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:04.225Z,1509704524.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:04.247Z,1509704524.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:04.630Z,1509704524.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:04.679Z,1509704524.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:05.029Z,1509704525.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:05.044Z,1509704525.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:05.442Z,1509704525.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:05.474Z,1509704525.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:05.854Z,1509704525.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:05.951Z,1509704525.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:06.242Z,1509704526.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:06.273Z,1509704526.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:06.629Z,1509704526.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:06.682Z,1509704526.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:07.029Z,1509704527.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:07.077Z,1509704527.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:07.429Z,1509704527.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:07.445Z,1509704527.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:07.830Z,1509704527.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:07.845Z,1509704527.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:08.229Z,1509704528.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:08.244Z,1509704528.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:08.642Z,1509704528.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:08.678Z,1509704528.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:09.042Z,1509704529.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:09.078Z,1509704529.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:09.441Z,1509704529.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:09.481Z,1509704529.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:09.828Z,1509704529.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:09.851Z,1509704529.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:10.228Z,1509704530.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:10.243Z,1509704530.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:10.628Z,1509704530.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:10.643Z,1509704530.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:11.028Z,1509704531.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:11.043Z,1509704531.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:11.442Z,1509704531.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:11.473Z,1509704531.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:11.845Z,1509704531.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:11.860Z,1509704531.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:12.245Z,1509704532.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:12.278Z,1509704532.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:12.630Z,1509704532.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:12.646Z,1509704532.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:13.031Z,1509704533.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:13.046Z,1509704533.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:13.430Z,1509704533.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:13.445Z,1509704533.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:13.833Z,1509704533.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:13.848Z,1509704533.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:14.233Z,1509704534.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:14.248Z,1509704534.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:14.638Z,1509704534.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:14.653Z,1509704534.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:15.041Z,1509704535.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:15.057Z,1509704535.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:15.441Z,1509704535.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:15.462Z,1509704535.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:15.832Z,1509704535.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:15.847Z,1509704535.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:16.232Z,1509704536.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:16.247Z,1509704536.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:16.635Z,1509704536.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:16.650Z,1509704536.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:17.034Z,1509704537.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:17.049Z,1509704537.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:17.438Z,1509704537.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:17.453Z,1509704537.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:17.836Z,1509704537.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:17.897Z,1509704537.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:18.238Z,1509704538.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:18.253Z,1509704538.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:18.632Z,1509704538.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:18.647Z,1509704538.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:19.034Z,1509704539.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:19.091Z,1509704539.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:19.428Z,1509704539.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:19.443Z,1509704539.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:19.833Z,1509704539.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:19.849Z,1509704539.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:20.235Z,1509704540.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:20.283Z,1509704540.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:20.640Z,1509704540.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:20.655Z,1509704540.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:21.041Z,1509704541.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:21.091Z,1509704541.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:21.441Z,1509704541.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:21.490Z,1509704541.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:21.834Z,1509704541.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:21.855Z,1509704541.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:22.232Z,1509704542.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:22.247Z,1509704542.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:22.635Z,1509704542.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:22.650Z,1509704542.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:23.034Z,1509704543.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:23.055Z,1509704543.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:23.440Z,1509704543.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:23.455Z,1509704543.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:23.840Z,1509704543.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:23.855Z,1509704543.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:24.241Z,1509704544.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:24.256Z,1509704544.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:24.632Z,1509704544.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:24.647Z,1509704544.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:25.035Z,1509704545.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:25.050Z,1509704545.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:25.434Z,1509704545.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:25.455Z,1509704545.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:25.833Z,1509704545.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:25.848Z,1509704545.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:26.233Z,1509704546.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:26.247Z,1509704546.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:26.640Z,1509704546.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:26.655Z,1509704546.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:27.040Z,1509704547.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:27.055Z,1509704547.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:27.440Z,1509704547.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:27.455Z,1509704547.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:27.834Z,1509704547.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:27.854Z,1509704547.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:28.232Z,1509704548.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:28.247Z,1509704548.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:28.633Z,1509704548.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:28.648Z,1509704548.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:29.035Z,1509704549.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:29.055Z,1509704549.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:29.440Z,1509704549.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:29.455Z,1509704549.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:29.844Z,1509704549.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:29.859Z,1509704549.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:30.241Z,1509704550.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:30.257Z,1509704550.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:30.634Z,1509704550.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:30.650Z,1509704550.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:31.035Z,1509704551.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:31.050Z,1509704551.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:31.432Z,1509704551.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:31.447Z,1509704551.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:31.835Z,1509704551.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:31.855Z,1509704551.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:32.235Z,1509704552.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:32.267Z,1509704552.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:32.645Z,1509704552.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:32.660Z,1509704552.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:33.045Z,1509704553.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:33.060Z,1509704553.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:33.445Z,1509704553.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:33.460Z,1509704553.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:33.835Z,1509704553.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:33.891Z,1509704553.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:34.232Z,1509704554.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:34.255Z,1509704554.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:34.636Z,1509704554.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:34.675Z,1509704554.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:35.020Z,1509704555.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:35.046Z,1509704555.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:35.448Z,1509704555.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:35.499Z,1509704555.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:35.845Z,1509704555.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:35.892Z,1509704555.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:36.245Z,1509704556.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:36.260Z,1509704556.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:36.635Z,1509704556.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:36.655Z,1509704556.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:37.035Z,1509704557.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:37.050Z,1509704557.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:37.435Z,1509704557.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:37.455Z,1509704557.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:37.835Z,1509704557.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:37.851Z,1509704557.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:38.235Z,1509704558.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:38.250Z,1509704558.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:38.641Z,1509704558.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:38.656Z,1509704558.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:39.045Z,1509704559.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:39.060Z,1509704559.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:39.448Z,1509704559.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:39.463Z,1509704559.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:39.835Z,1509704559.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:39.855Z,1509704559.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:40.234Z,1509704560.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:40.255Z,1509704560.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:40.637Z,1509704560.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:40.651Z,1509704560.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:41.019Z,1509704561.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:41.046Z,1509704561.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:41.445Z,1509704561.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:41.461Z,1509704561.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:41.849Z,1509704561.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:41.863Z,1509704561.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:42.247Z,1509704562.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:42.262Z,1509704562.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:42.636Z,1509704562.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:42.659Z,1509704562.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:43.032Z,1509704563.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:43.055Z,1509704563.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:43.438Z,1509704563.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:43.454Z,1509704563.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:43.838Z,1509704563.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:43.853Z,1509704563.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:44.238Z,1509704564.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:44.253Z,1509704564.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:44.650Z,1509704564.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:44.666Z,1509704564.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:45.047Z,1509704565.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:45.062Z,1509704565.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:48.142Z,1509704568.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:48.230Z,1509704568.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:48.364Z,1509704568.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:48.396Z,1509704568.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:48.753Z,1509704568.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:48.807Z,1509704568.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:49.152Z,1509704569.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:49.166Z,1509704569.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:49.557Z,1509704569.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:49.603Z,1509704569.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:49.965Z,1509704569.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:50.019Z,1509704570.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:50.365Z,1509704570.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:50.402Z,1509704570.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:50.753Z,1509704570.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:50.768Z,1509704570.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:51.152Z,1509704571.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:51.168Z,1509704571.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:51.553Z,1509704571.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:51.568Z,1509704571.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:51.953Z,1509704571.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:51.969Z,1509704571.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:52.365Z,1509704572.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:52.398Z,1509704572.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:52.770Z,1509704572.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:52.800Z,1509704572.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:53.158Z,1509704573.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:53.173Z,1509704573.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:53.558Z,1509704573.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:53.573Z,1509704573.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:53.954Z,1509704573.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:53.969Z,1509704573.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:54.359Z,1509704574.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:54.381Z,1509704574.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:54.769Z,1509704574.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:54.801Z,1509704574.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:55.168Z,1509704575.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:55.183Z,1509704575.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:55.562Z,1509704575.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:55.578Z,1509704575.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:55.958Z,1509704575.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:55.976Z,1509704575.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:56.363Z,1509704576.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:56.383Z,1509704576.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:56.763Z,1509704576.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:56.778Z,1509704576.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:57.162Z,1509704577.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:57.179Z,1509704577.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:57.557Z,1509704577.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:57.577Z,1509704577.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:57.959Z,1509704577.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:57.979Z,1509704577.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:58.361Z,1509704578.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:58.378Z,1509704578.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:58.764Z,1509704578.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:58.783Z,1509704578.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:59.162Z,1509704579.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:59.182Z,1509704579.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:59.559Z,1509704579.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:59.575Z,1509704579.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:22:59.957Z,1509704579.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:22:59.978Z,1509704579.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:00.362Z,1509704580.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:00.377Z,1509704580.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:00.761Z,1509704580.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:00.781Z,1509704580.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:01.165Z,1509704581.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:01.208Z,1509704581.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:01.557Z,1509704581.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:01.573Z,1509704581.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:01.956Z,1509704581.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:02.019Z,1509704582.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:02.365Z,1509704582.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:02.426Z,1509704582.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:02.765Z,1509704582.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:02.781Z,1509704582.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:03.164Z,1509704583.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:03.179Z,1509704583.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:03.552Z,1509704583.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:03.607Z,1509704583.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:03.959Z,1509704583.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:03.981Z,1509704583.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:04.364Z,1509704584.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:04.411Z,1509704584.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:04.764Z,1509704584.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:04.811Z,1509704584.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:05.163Z,1509704585.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:05.186Z,1509704585.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:05.559Z,1509704585.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:05.578Z,1509704585.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:05.960Z,1509704585.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:05.978Z,1509704585.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:06.364Z,1509704586.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:06.379Z,1509704586.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:06.763Z,1509704586.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:06.786Z,1509704586.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:07.164Z,1509704587.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:07.183Z,1509704587.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:07.559Z,1509704587.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:07.574Z,1509704587.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:07.956Z,1509704587.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:07.971Z,1509704587.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:08.364Z,1509704588.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:08.381Z,1509704588.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:08.763Z,1509704588.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:08.782Z,1509704588.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:09.164Z,1509704589.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:09.179Z,1509704589.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:09.559Z,1509704589.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:09.574Z,1509704589.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:09.952Z,1509704589.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:09.967Z,1509704589.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:10.364Z,1509704590.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:10.383Z,1509704590.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:10.765Z,1509704590.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:10.780Z,1509704590.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:11.164Z,1509704591.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:11.179Z,1509704591.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:11.557Z,1509704591.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:11.579Z,1509704591.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:11.959Z,1509704591.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:11.979Z,1509704591.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:12.364Z,1509704592.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:12.379Z,1509704592.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:12.764Z,1509704592.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:12.787Z,1509704592.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:13.165Z,1509704593.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:13.206Z,1509704593.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:13.559Z,1509704593.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:13.578Z,1509704593.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:13.956Z,1509704593.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:13.971Z,1509704593.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:14.364Z,1509704594.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:14.379Z,1509704594.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:14.765Z,1509704594.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:14.783Z,1509704594.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:15.164Z,1509704595.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:15.183Z,1509704595.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:15.559Z,1509704595.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:15.574Z,1509704595.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:15.958Z,1509704595.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:15.979Z,1509704595.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:16.364Z,1509704596.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:16.381Z,1509704596.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:16.764Z,1509704596.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:16.848Z,1509704596.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:17.165Z,1509704597.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:17.180Z,1509704597.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:17.557Z,1509704597.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:17.610Z,1509704597.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:17.957Z,1509704597.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:17.971Z,1509704597.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:18.365Z,1509704598.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:18.415Z,1509704598.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:18.768Z,1509704598.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:18.783Z,1509704598.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:19.168Z,1509704599.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:19.218Z,1509704599.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:19.559Z,1509704599.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:19.579Z,1509704599.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:19.956Z,1509704599.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:19.973Z,1509704599.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:20.369Z,1509704600.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:20.385Z,1509704600.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:20.768Z,1509704600.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:20.787Z,1509704600.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:21.167Z,1509704601.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:21.190Z,1509704601.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:21.560Z,1509704601.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:21.579Z,1509704601.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:21.959Z,1509704601.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:21.979Z,1509704601.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:22.368Z,1509704602.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:22.384Z,1509704602.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:22.768Z,1509704602.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:22.787Z,1509704602.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:23.165Z,1509704603.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:23.184Z,1509704603.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:23.557Z,1509704603.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:23.572Z,1509704603.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:23.960Z,1509704603.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:23.975Z,1509704603.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:24.361Z,1509704604.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:24.377Z,1509704604.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:24.769Z,1509704604.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:24.787Z,1509704604.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:25.168Z,1509704605.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:25.184Z,1509704605.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:25.559Z,1509704605.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:25.579Z,1509704605.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:25.956Z,1509704605.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:25.971Z,1509704605.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:26.369Z,1509704606.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:26.387Z,1509704606.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:26.768Z,1509704606.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:26.783Z,1509704606.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:27.168Z,1509704607.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:27.187Z,1509704607.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:27.558Z,1509704607.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:27.574Z,1509704607.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:27.959Z,1509704607.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:27.981Z,1509704607.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:28.368Z,1509704608.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:28.384Z,1509704608.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:28.768Z,1509704608.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:28.784Z,1509704608.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:29.168Z,1509704609.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:29.190Z,1509704609.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:29.558Z,1509704609.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:29.576Z,1509704609.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:29.961Z,1509704609.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:29.976Z,1509704609.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:30.369Z,1509704610.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:30.385Z,1509704610.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:30.769Z,1509704610.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:30.789Z,1509704610.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:31.175Z,1509704611.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:31.254Z,1509704611.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:31.552Z,1509704611.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:31.587Z,1509704611.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:31.948Z,1509704611.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:31.987Z,1509704611.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:32.375Z,1509704612.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:32.394Z,1509704612.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:32.772Z,1509704612.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:32.827Z,1509704612.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:33.172Z,1509704613.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:33.230Z,1509704613.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:33.553Z,1509704613.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:33.581Z,1509704613.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:33.952Z,1509704613.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:33.987Z,1509704613.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:34.375Z,1509704614.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:34.391Z,1509704614.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:34.776Z,1509704614.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:34.820Z,1509704614.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:35.172Z,1509704615.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:35.187Z,1509704615.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:35.549Z,1509704615.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:35.593Z,1509704615.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:35.951Z,1509704615.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:35.967Z,1509704615.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:36.361Z,1509704616.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:36.393Z,1509704616.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:36.765Z,1509704616.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:36.801Z,1509704616.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:37.161Z,1509704617.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:37.192Z,1509704617.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:37.556Z,1509704617.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:37.600Z,1509704617.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:37.952Z,1509704617.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:37.967Z,1509704617.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:38.362Z,1509704618.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:38.394Z,1509704618.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:38.766Z,1509704618.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:38.801Z,1509704618.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:39.166Z,1509704619.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:39.201Z,1509704619.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:39.552Z,1509704619.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:39.567Z,1509704619.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:39.952Z,1509704619.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:39.968Z,1509704619.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:40.361Z,1509704620.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:40.400Z,1509704620.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:40.771Z,1509704620.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:40.796Z,1509704620.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:41.158Z,1509704621.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:41.173Z,1509704621.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:41.556Z,1509704621.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:41.571Z,1509704621.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:41.955Z,1509704621.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:41.970Z,1509704621.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:42.370Z,1509704622.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:42.399Z,1509704622.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:42.761Z,1509704622.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:42.777Z,1509704622.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:43.168Z,1509704623.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:43.204Z,1509704623.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:43.556Z,1509704623.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:43.579Z,1509704623.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:43.956Z,1509704623.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:43.973Z,1509704623.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:44.369Z,1509704624.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:44.406Z,1509704624.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:44.410Z,1509704624.410 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T10:23:44.410Z,1509704624.410 [Default:CheckIn:C.Wait] Stopped
2017-11-03T10:23:44.410Z,1509704624.410 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T10:23:44.411Z,1509704624.411 [Default:CheckIn:D] Running Loop=1
2017-11-03T10:23:44.769Z,1509704624.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:44.804Z,1509704624.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:44.808Z,1509704624.808 [Default:CheckIn:D] Stopped
2017-11-03T10:23:44.808Z,1509704624.808 [Default:CheckIn:E] Running Loop=1
2017-11-03T10:23:45.166Z,1509704625.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:45.183Z,1509704625.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:45.205Z,1509704625.205 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 608.620703 min 
2017-11-03T10:23:45.205Z,1509704625.205 [Default:CheckIn:E] Stopped
2017-11-03T10:23:45.205Z,1509704625.205 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T10:23:45.205Z,1509704625.205 [Default:CheckIn] Stopped
2017-11-03T10:23:45.205Z,1509704625.205 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T10:23:45.205Z,1509704625.205 [Default:CheckIn](INFO): Running loop #60
2017-11-03T10:23:45.205Z,1509704625.205 [Default:CheckIn] Running Loop=60
2017-11-03T10:23:45.206Z,1509704625.206 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T10:23:45.206Z,1509704625.206 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T10:23:48.266Z,1509704628.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:48.351Z,1509704628.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:48.492Z,1509704628.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:48.525Z,1509704628.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:48.903Z,1509704628.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:48.935Z,1509704628.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:49.302Z,1509704629.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:49.350Z,1509704629.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:49.698Z,1509704629.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:49.730Z,1509704629.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:50.089Z,1509704630.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:50.141Z,1509704630.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:50.488Z,1509704630.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:50.542Z,1509704630.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:50.889Z,1509704630.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:50.911Z,1509704630.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:51.288Z,1509704631.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:51.311Z,1509704631.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:51.702Z,1509704631.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:51.733Z,1509704631.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:52.106Z,1509704632.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:52.142Z,1509704632.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:52.498Z,1509704632.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:52.513Z,1509704632.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:52.879Z,1509704632.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:52.918Z,1509704632.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:53.279Z,1509704633.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:53.303Z,1509704633.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:53.700Z,1509704633.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:53.727Z,1509704633.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:54.079Z,1509704634.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:54.118Z,1509704634.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:54.490Z,1509704634.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:54.514Z,1509704634.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:54.898Z,1509704634.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:54.923Z,1509704634.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:55.294Z,1509704635.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:55.318Z,1509704635.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:55.683Z,1509704635.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:55.714Z,1509704635.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:56.084Z,1509704636.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:56.113Z,1509704636.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:56.487Z,1509704636.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:56.513Z,1509704636.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:56.881Z,1509704636.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:56.918Z,1509704636.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:57.284Z,1509704637.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:57.316Z,1509704637.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:57.710Z,1509704637.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:57.726Z,1509704637.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:58.109Z,1509704638.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:58.125Z,1509704638.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:58.498Z,1509704638.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:58.531Z,1509704638.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:58.887Z,1509704638.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:58.926Z,1509704638.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:59.280Z,1509704639.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:59.296Z,1509704639.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:23:59.688Z,1509704639.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:23:59.722Z,1509704639.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:00.087Z,1509704640.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:00.125Z,1509704640.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:00.493Z,1509704640.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:00.520Z,1509704640.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:00.898Z,1509704640.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:00.931Z,1509704640.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:01.310Z,1509704641.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:01.330Z,1509704641.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:01.684Z,1509704641.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:01.700Z,1509704641.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:02.084Z,1509704642.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:02.100Z,1509704642.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:02.484Z,1509704642.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:02.570Z,1509704642.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:02.884Z,1509704642.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:02.900Z,1509704642.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:03.291Z,1509704643.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:03.330Z,1509704643.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:03.697Z,1509704643.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:03.750Z,1509704643.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:04.102Z,1509704644.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:04.125Z,1509704644.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:04.502Z,1509704644.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:04.559Z,1509704644.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:04.883Z,1509704644.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:04.930Z,1509704644.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:05.289Z,1509704645.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:05.304Z,1509704645.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:05.689Z,1509704645.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:05.731Z,1509704645.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:06.091Z,1509704646.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:06.106Z,1509704646.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:06.498Z,1509704646.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:06.529Z,1509704646.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:06.902Z,1509704646.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:06.925Z,1509704646.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:07.305Z,1509704647.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:07.338Z,1509704647.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:07.688Z,1509704647.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:07.711Z,1509704647.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:08.087Z,1509704648.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:08.103Z,1509704648.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:08.491Z,1509704648.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:08.506Z,1509704648.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:08.888Z,1509704648.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:08.903Z,1509704648.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:09.287Z,1509704649.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:09.310Z,1509704649.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:09.696Z,1509704649.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:09.711Z,1509704649.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:10.098Z,1509704650.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:10.133Z,1509704650.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:10.502Z,1509704650.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:10.531Z,1509704650.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:10.887Z,1509704650.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:10.902Z,1509704650.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:11.287Z,1509704651.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:11.303Z,1509704651.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:11.688Z,1509704651.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:11.703Z,1509704651.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:12.088Z,1509704652.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:12.110Z,1509704652.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:12.502Z,1509704652.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:12.533Z,1509704652.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:12.902Z,1509704652.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:12.933Z,1509704652.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:13.301Z,1509704653.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:13.333Z,1509704653.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:13.688Z,1509704653.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:13.711Z,1509704653.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:14.089Z,1509704654.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:14.104Z,1509704654.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:14.488Z,1509704654.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:14.503Z,1509704654.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:14.902Z,1509704654.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:14.929Z,1509704654.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:15.289Z,1509704655.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:15.304Z,1509704655.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:15.692Z,1509704655.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:15.707Z,1509704655.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:16.105Z,1509704656.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:16.137Z,1509704656.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:16.498Z,1509704656.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:16.513Z,1509704656.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:16.892Z,1509704656.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:16.973Z,1509704656.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:17.292Z,1509704657.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:17.307Z,1509704657.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:17.693Z,1509704657.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:17.709Z,1509704657.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:18.095Z,1509704658.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:18.139Z,1509704658.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:18.500Z,1509704658.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:18.515Z,1509704658.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:18.900Z,1509704658.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:18.950Z,1509704658.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:19.301Z,1509704659.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:19.340Z,1509704659.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:19.692Z,1509704659.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:19.707Z,1509704659.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:20.092Z,1509704660.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:20.108Z,1509704660.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:20.487Z,1509704660.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:20.507Z,1509704660.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:20.896Z,1509704660.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:20.911Z,1509704660.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:21.293Z,1509704661.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:21.308Z,1509704661.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:21.701Z,1509704661.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:21.723Z,1509704661.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:22.101Z,1509704662.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:22.116Z,1509704662.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:22.502Z,1509704662.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:22.517Z,1509704662.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:22.890Z,1509704662.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:22.915Z,1509704662.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:23.293Z,1509704663.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:23.308Z,1509704663.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:23.695Z,1509704663.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:23.715Z,1509704663.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:24.105Z,1509704664.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:24.120Z,1509704664.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:24.501Z,1509704664.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:24.523Z,1509704664.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:24.902Z,1509704664.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:24.918Z,1509704664.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:25.303Z,1509704665.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:25.318Z,1509704665.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:25.695Z,1509704665.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:25.711Z,1509704665.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:26.096Z,1509704666.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:26.112Z,1509704666.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:26.498Z,1509704666.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:26.514Z,1509704666.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:26.897Z,1509704666.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:26.913Z,1509704666.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:27.293Z,1509704667.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:27.308Z,1509704667.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:27.702Z,1509704667.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:27.724Z,1509704667.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:28.101Z,1509704668.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:28.116Z,1509704668.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:28.501Z,1509704668.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:28.516Z,1509704668.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:28.896Z,1509704668.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:28.912Z,1509704668.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:29.296Z,1509704669.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:29.312Z,1509704669.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:29.695Z,1509704669.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:29.710Z,1509704669.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:30.096Z,1509704670.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:30.111Z,1509704670.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:30.111Z,1509704670.111 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 203
2017-11-03T10:24:30.111Z,1509704670.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:24:30.114Z,1509704670.114 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:30.114Z,1509704670.114 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 203
2017-11-03T10:24:30.114Z,1509704670.114 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:24:30.116Z,1509704670.116 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:30.117Z,1509704670.117 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 203
2017-11-03T10:24:30.117Z,1509704670.117 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:24:30.189Z,1509704670.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:24:30.189Z,1509704670.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:24:30.189Z,1509704670.189 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:24:30.499Z,1509704670.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:30.608Z,1509704670.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:24:30.609Z,1509704670.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 203
2017-11-03T10:24:30.609Z,1509704670.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:24:30.609Z,1509704670.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 203
2017-11-03T10:24:30.610Z,1509704670.610 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:24:30.610Z,1509704670.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 203
2017-11-03T10:24:30.910Z,1509704670.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:30.925Z,1509704670.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:24:30.926Z,1509704670.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:24:30.926Z,1509704670.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:24:30.926Z,1509704670.926 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:24:30.927Z,1509704670.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:24:30.927Z,1509704670.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:24:30.928Z,1509704670.928 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:24:30.928Z,1509704670.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:24:30.928Z,1509704670.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:24:31.306Z,1509704671.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:31.374Z,1509704671.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-03T10:24:31.375Z,1509704671.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:31.687Z,1509704671.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:31.722Z,1509704671.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:24:31.723Z,1509704671.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:32.084Z,1509704672.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:32.099Z,1509704672.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:24:32.124Z,1509704672.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:32.484Z,1509704672.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:32.527Z,1509704672.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:24:32.528Z,1509704672.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:32.888Z,1509704672.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:32.927Z,1509704672.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:24:32.928Z,1509704672.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:33.285Z,1509704673.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:33.337Z,1509704673.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:24:33.338Z,1509704673.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:33.696Z,1509704673.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:33.752Z,1509704673.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:24:33.765Z,1509704673.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:34.098Z,1509704674.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:34.123Z,1509704674.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:24:34.124Z,1509704674.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:34.498Z,1509704674.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:34.523Z,1509704674.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:24:34.524Z,1509704674.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:34.885Z,1509704674.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:34.899Z,1509704674.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:24:34.900Z,1509704674.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:35.284Z,1509704675.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:35.299Z,1509704675.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:24:35.300Z,1509704675.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:35.684Z,1509704675.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:35.699Z,1509704675.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:24:35.700Z,1509704675.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:36.083Z,1509704676.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:36.098Z,1509704676.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:24:36.098Z,1509704676.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:36.498Z,1509704676.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:36.521Z,1509704676.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:24:36.522Z,1509704676.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:36.898Z,1509704676.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:36.921Z,1509704676.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:24:36.922Z,1509704676.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:37.297Z,1509704677.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:37.322Z,1509704677.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:24:37.323Z,1509704677.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:37.684Z,1509704677.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:37.698Z,1509704677.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:24:37.699Z,1509704677.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:38.084Z,1509704678.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:38.098Z,1509704678.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:24:38.099Z,1509704678.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:38.491Z,1509704678.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:38.527Z,1509704678.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:24:38.528Z,1509704678.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:38.884Z,1509704678.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:38.899Z,1509704678.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:24:38.900Z,1509704678.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:39.283Z,1509704679.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:39.298Z,1509704679.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:24:39.299Z,1509704679.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:39.697Z,1509704679.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:39.723Z,1509704679.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:24:39.724Z,1509704679.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:40.098Z,1509704680.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:40.112Z,1509704680.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:24:40.113Z,1509704680.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:40.498Z,1509704680.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:40.512Z,1509704680.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:24:40.513Z,1509704680.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:40.892Z,1509704680.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:40.906Z,1509704680.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:24:40.907Z,1509704680.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:41.292Z,1509704681.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:41.307Z,1509704681.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:24:41.308Z,1509704681.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:41.692Z,1509704681.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:41.707Z,1509704681.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:24:41.708Z,1509704681.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:42.092Z,1509704682.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:42.114Z,1509704682.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:24:42.115Z,1509704682.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:42.506Z,1509704682.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:42.537Z,1509704682.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:24:42.538Z,1509704682.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:42.898Z,1509704682.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:42.913Z,1509704682.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:24:42.914Z,1509704682.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:43.301Z,1509704683.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:43.315Z,1509704683.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:24:43.317Z,1509704683.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:43.694Z,1509704683.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:43.709Z,1509704683.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:24:43.710Z,1509704683.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:44.092Z,1509704684.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:44.107Z,1509704684.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:24:44.108Z,1509704684.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:44.495Z,1509704684.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:44.510Z,1509704684.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:24:44.511Z,1509704684.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:44.895Z,1509704684.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:44.914Z,1509704684.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:24:44.915Z,1509704684.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:45.296Z,1509704685.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:45.310Z,1509704685.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:24:45.311Z,1509704685.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:48.398Z,1509704688.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:48.481Z,1509704688.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:24:48.482Z,1509704688.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:48.649Z,1509704688.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:48.664Z,1509704688.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T10:24:48.665Z,1509704688.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:49.045Z,1509704689.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:49.060Z,1509704689.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T10:24:49.061Z,1509704689.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:49.439Z,1509704689.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:49.493Z,1509704689.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T10:24:49.494Z,1509704689.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:49.828Z,1509704689.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:49.853Z,1509704689.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T10:24:49.854Z,1509704689.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:50.224Z,1509704690.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:50.289Z,1509704690.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:50.646Z,1509704690.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:50.661Z,1509704690.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:51.041Z,1509704691.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:51.094Z,1509704691.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:51.445Z,1509704691.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:51.467Z,1509704691.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:51.827Z,1509704691.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:51.853Z,1509704691.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:52.220Z,1509704692.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:52.250Z,1509704692.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:52.625Z,1509704692.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:52.659Z,1509704692.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:53.027Z,1509704693.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:53.052Z,1509704693.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:53.445Z,1509704693.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:53.460Z,1509704693.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:53.845Z,1509704693.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:53.867Z,1509704693.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:54.249Z,1509704694.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:54.264Z,1509704694.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:54.620Z,1509704694.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:54.650Z,1509704694.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:55.024Z,1509704695.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:55.050Z,1509704695.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:55.427Z,1509704695.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:55.452Z,1509704695.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:55.828Z,1509704695.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:55.853Z,1509704695.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:56.224Z,1509704696.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:56.250Z,1509704696.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:56.650Z,1509704696.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:56.664Z,1509704696.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:57.049Z,1509704697.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:57.064Z,1509704697.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:57.445Z,1509704697.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:57.460Z,1509704697.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:57.827Z,1509704697.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:57.853Z,1509704697.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:58.224Z,1509704698.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:58.250Z,1509704698.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:58.627Z,1509704698.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:58.653Z,1509704698.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:59.027Z,1509704699.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:59.053Z,1509704699.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:59.438Z,1509704699.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:59.459Z,1509704699.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:24:59.849Z,1509704699.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:24:59.864Z,1509704699.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:00.249Z,1509704700.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:00.271Z,1509704700.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:00.627Z,1509704700.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:00.653Z,1509704700.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:01.027Z,1509704701.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:01.053Z,1509704701.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:01.427Z,1509704701.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:01.452Z,1509704701.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:01.825Z,1509704701.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:01.851Z,1509704701.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:02.227Z,1509704702.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:02.253Z,1509704702.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:02.649Z,1509704702.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:02.742Z,1509704702.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:03.042Z,1509704703.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:03.063Z,1509704703.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:03.445Z,1509704703.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:03.461Z,1509704703.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:03.827Z,1509704703.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:03.875Z,1509704703.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:04.227Z,1509704704.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:04.252Z,1509704704.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:04.627Z,1509704704.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:04.698Z,1509704704.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:05.024Z,1509704705.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:05.079Z,1509704705.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:05.441Z,1509704705.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:05.457Z,1509704705.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:05.849Z,1509704705.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:05.864Z,1509704705.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:06.248Z,1509704706.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:06.263Z,1509704706.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:06.624Z,1509704706.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:06.654Z,1509704706.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:07.027Z,1509704707.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:07.053Z,1509704707.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:07.427Z,1509704707.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:07.452Z,1509704707.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:07.822Z,1509704707.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:07.853Z,1509704707.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:08.227Z,1509704708.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:08.257Z,1509704708.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:08.650Z,1509704708.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:08.664Z,1509704708.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:09.049Z,1509704709.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:09.064Z,1509704709.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:09.445Z,1509704709.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:09.460Z,1509704709.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:09.827Z,1509704709.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:09.858Z,1509704709.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:10.220Z,1509704710.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:10.235Z,1509704710.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:10.625Z,1509704710.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:10.660Z,1509704710.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:11.031Z,1509704711.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:11.045Z,1509704711.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:11.441Z,1509704711.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:11.465Z,1509704711.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:11.841Z,1509704711.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:11.866Z,1509704711.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:12.241Z,1509704712.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:12.274Z,1509704712.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:12.630Z,1509704712.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:12.645Z,1509704712.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:13.024Z,1509704713.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:13.047Z,1509704713.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:13.431Z,1509704713.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:13.446Z,1509704713.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:13.830Z,1509704713.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:13.846Z,1509704713.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:14.229Z,1509704714.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:14.244Z,1509704714.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:14.645Z,1509704714.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:14.674Z,1509704714.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:15.042Z,1509704715.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:15.066Z,1509704715.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:15.442Z,1509704715.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:15.471Z,1509704715.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:15.831Z,1509704715.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:15.846Z,1509704715.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:16.231Z,1509704716.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:16.268Z,1509704716.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:16.629Z,1509704716.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:16.646Z,1509704716.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:17.031Z,1509704717.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:17.046Z,1509704717.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:17.437Z,1509704717.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:17.534Z,1509704717.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:17.841Z,1509704717.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:17.876Z,1509704717.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:18.240Z,1509704718.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:18.287Z,1509704718.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:18.629Z,1509704718.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:18.651Z,1509704718.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:19.029Z,1509704719.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:19.083Z,1509704719.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:19.428Z,1509704719.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:19.476Z,1509704719.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:19.829Z,1509704719.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:19.845Z,1509704719.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:20.228Z,1509704720.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:20.244Z,1509704720.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:20.642Z,1509704720.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:20.677Z,1509704720.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:21.042Z,1509704721.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:21.077Z,1509704721.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:21.452Z,1509704721.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:21.477Z,1509704721.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:21.828Z,1509704721.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:21.843Z,1509704721.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:22.228Z,1509704722.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:22.251Z,1509704722.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:22.629Z,1509704722.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:22.644Z,1509704722.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:23.028Z,1509704723.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:23.042Z,1509704723.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:23.442Z,1509704723.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:23.473Z,1509704723.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:23.838Z,1509704723.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:23.853Z,1509704723.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:24.245Z,1509704724.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:24.260Z,1509704724.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:24.632Z,1509704724.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:24.647Z,1509704724.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:25.030Z,1509704725.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:25.049Z,1509704725.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:25.430Z,1509704725.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:25.445Z,1509704725.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:25.832Z,1509704725.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:25.847Z,1509704725.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:26.230Z,1509704726.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:26.248Z,1509704726.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:26.637Z,1509704726.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:26.658Z,1509704726.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:27.034Z,1509704727.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:27.049Z,1509704727.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:27.437Z,1509704727.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:27.453Z,1509704727.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:27.833Z,1509704727.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:27.848Z,1509704727.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:28.234Z,1509704728.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:28.249Z,1509704728.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:28.633Z,1509704728.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:28.648Z,1509704728.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:29.034Z,1509704729.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:29.049Z,1509704729.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:29.438Z,1509704729.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:29.453Z,1509704729.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:29.842Z,1509704729.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:29.857Z,1509704729.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:30.237Z,1509704730.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:30.258Z,1509704730.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:30.634Z,1509704730.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:30.649Z,1509704730.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:31.032Z,1509704731.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:31.047Z,1509704731.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:31.433Z,1509704731.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:31.498Z,1509704731.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:31.834Z,1509704731.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:31.898Z,1509704731.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:32.232Z,1509704732.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:32.247Z,1509704732.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:32.641Z,1509704732.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:32.662Z,1509704732.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:33.041Z,1509704733.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:33.087Z,1509704733.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:33.437Z,1509704733.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:33.452Z,1509704733.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:33.833Z,1509704733.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:33.885Z,1509704733.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:34.234Z,1509704734.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:34.287Z,1509704734.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:34.634Z,1509704734.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:34.655Z,1509704734.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:35.034Z,1509704735.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:35.049Z,1509704735.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:35.438Z,1509704735.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:35.453Z,1509704735.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:35.837Z,1509704735.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:35.852Z,1509704735.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:36.241Z,1509704736.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:36.256Z,1509704736.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:36.628Z,1509704736.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:36.643Z,1509704736.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:37.032Z,1509704737.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:37.054Z,1509704737.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:37.434Z,1509704737.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:37.449Z,1509704737.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:37.830Z,1509704737.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:37.845Z,1509704737.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:38.232Z,1509704738.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:38.247Z,1509704738.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:38.641Z,1509704738.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:38.656Z,1509704738.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:39.036Z,1509704739.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:39.051Z,1509704739.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:39.438Z,1509704739.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:39.453Z,1509704739.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:39.835Z,1509704739.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:39.854Z,1509704739.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:40.234Z,1509704740.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:40.249Z,1509704740.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:40.633Z,1509704740.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:40.648Z,1509704740.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:41.033Z,1509704741.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:41.048Z,1509704741.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:41.438Z,1509704741.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:41.453Z,1509704741.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:41.837Z,1509704741.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:41.852Z,1509704741.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:42.242Z,1509704742.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:42.257Z,1509704742.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:42.632Z,1509704742.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:42.655Z,1509704742.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:43.032Z,1509704743.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:43.047Z,1509704743.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:43.435Z,1509704743.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:43.455Z,1509704743.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:43.833Z,1509704743.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:43.848Z,1509704743.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:44.232Z,1509704744.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:44.247Z,1509704744.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:44.642Z,1509704744.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:44.657Z,1509704744.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:45.036Z,1509704745.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:45.051Z,1509704745.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:45.438Z,1509704745.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:45.454Z,1509704745.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:48.510Z,1509704748.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:48.591Z,1509704748.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:48.735Z,1509704748.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:48.785Z,1509704748.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:49.140Z,1509704749.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:49.155Z,1509704749.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:49.541Z,1509704749.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:49.593Z,1509704749.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:49.940Z,1509704749.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:49.959Z,1509704749.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:50.328Z,1509704750.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:50.386Z,1509704750.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:50.734Z,1509704750.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:50.794Z,1509704750.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:51.128Z,1509704751.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:51.143Z,1509704751.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:51.540Z,1509704751.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:51.563Z,1509704751.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:51.940Z,1509704751.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:51.955Z,1509704751.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:52.339Z,1509704752.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:52.359Z,1509704752.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:52.732Z,1509704752.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:52.747Z,1509704752.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:53.136Z,1509704753.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:53.151Z,1509704753.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:53.533Z,1509704753.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:53.548Z,1509704753.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:53.932Z,1509704753.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:53.947Z,1509704753.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:54.342Z,1509704754.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:54.366Z,1509704754.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:54.742Z,1509704754.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:54.758Z,1509704754.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:55.150Z,1509704755.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:55.199Z,1509704755.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:55.543Z,1509704755.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:55.571Z,1509704755.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:55.925Z,1509704755.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:55.970Z,1509704755.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:56.354Z,1509704756.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:56.405Z,1509704756.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:56.755Z,1509704756.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:56.805Z,1509704756.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:57.148Z,1509704757.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:57.172Z,1509704757.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:57.543Z,1509704757.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:57.559Z,1509704757.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:57.927Z,1509704757.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:57.962Z,1509704757.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:58.338Z,1509704758.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:58.363Z,1509704758.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:58.765Z,1509704758.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:58.780Z,1509704758.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:59.143Z,1509704759.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:59.182Z,1509704759.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:59.530Z,1509704759.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:59.573Z,1509704759.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:25:59.941Z,1509704759.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:25:59.980Z,1509704759.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:00.359Z,1509704760.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:00.383Z,1509704760.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:00.773Z,1509704760.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:00.821Z,1509704760.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:01.166Z,1509704761.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:01.199Z,1509704761.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:01.534Z,1509704761.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:01.583Z,1509704761.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:01.938Z,1509704761.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:01.979Z,1509704761.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:02.362Z,1509704762.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:02.459Z,1509704762.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:02.755Z,1509704762.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:02.803Z,1509704762.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:03.144Z,1509704763.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:03.202Z,1509704763.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:03.526Z,1509704763.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:03.594Z,1509704763.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:03.970Z,1509704763.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:04.018Z,1509704764.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:04.336Z,1509704764.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:04.403Z,1509704764.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:04.748Z,1509704764.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:04.819Z,1509704764.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:05.153Z,1509704765.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:05.171Z,1509704765.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:05.526Z,1509704765.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:05.564Z,1509704765.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:05.925Z,1509704765.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:05.968Z,1509704765.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:06.336Z,1509704766.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:06.368Z,1509704766.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:06.749Z,1509704766.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:06.780Z,1509704766.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:07.136Z,1509704767.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:07.170Z,1509704767.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:07.525Z,1509704767.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:07.573Z,1509704767.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:07.938Z,1509704767.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:07.982Z,1509704767.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:08.338Z,1509704768.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:08.379Z,1509704768.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:08.739Z,1509704768.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:08.760Z,1509704768.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:09.134Z,1509704769.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:09.179Z,1509704769.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:09.531Z,1509704769.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:09.563Z,1509704769.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:09.930Z,1509704769.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:09.945Z,1509704769.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:10.339Z,1509704770.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:10.363Z,1509704770.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:10.740Z,1509704770.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:10.764Z,1509704770.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:11.140Z,1509704771.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:11.166Z,1509704771.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:11.526Z,1509704771.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:11.551Z,1509704771.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:11.925Z,1509704771.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:11.955Z,1509704771.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:12.340Z,1509704772.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:12.392Z,1509704772.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:12.740Z,1509704772.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:12.763Z,1509704772.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:13.133Z,1509704773.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:13.149Z,1509704773.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:13.525Z,1509704773.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:13.540Z,1509704773.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:13.925Z,1509704773.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:13.941Z,1509704773.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:14.337Z,1509704774.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:14.353Z,1509704774.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:14.742Z,1509704774.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:14.799Z,1509704774.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:15.138Z,1509704775.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:15.153Z,1509704775.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:15.526Z,1509704775.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:15.541Z,1509704775.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:15.921Z,1509704775.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:15.935Z,1509704775.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:16.337Z,1509704776.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:16.353Z,1509704776.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:16.741Z,1509704776.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:16.783Z,1509704776.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:17.141Z,1509704777.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:17.175Z,1509704777.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:17.528Z,1509704777.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:17.543Z,1509704777.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:17.924Z,1509704777.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:17.971Z,1509704777.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:18.341Z,1509704778.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:18.356Z,1509704778.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:18.741Z,1509704778.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:18.789Z,1509704778.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:19.137Z,1509704779.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:19.183Z,1509704779.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:19.524Z,1509704779.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:19.538Z,1509704779.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:19.942Z,1509704779.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:19.967Z,1509704779.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:20.334Z,1509704780.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:20.355Z,1509704780.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:20.734Z,1509704780.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:20.756Z,1509704780.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:21.130Z,1509704781.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:21.154Z,1509704781.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:21.539Z,1509704781.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:21.559Z,1509704781.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:21.935Z,1509704781.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:21.950Z,1509704781.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:22.344Z,1509704782.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:22.359Z,1509704782.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:22.744Z,1509704782.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:22.759Z,1509704782.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:23.141Z,1509704783.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:23.156Z,1509704783.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:23.535Z,1509704783.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:23.555Z,1509704783.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:23.932Z,1509704783.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:23.947Z,1509704783.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:24.341Z,1509704784.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:24.356Z,1509704784.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:24.744Z,1509704784.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:24.767Z,1509704784.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:25.140Z,1509704785.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:25.155Z,1509704785.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:25.535Z,1509704785.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:25.549Z,1509704785.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:25.932Z,1509704785.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:25.947Z,1509704785.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:26.344Z,1509704786.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:26.359Z,1509704786.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:26.744Z,1509704786.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:26.759Z,1509704786.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:27.144Z,1509704787.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:27.159Z,1509704787.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:27.534Z,1509704787.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:27.549Z,1509704787.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:27.935Z,1509704787.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:27.950Z,1509704787.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:28.344Z,1509704788.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:28.359Z,1509704788.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:28.744Z,1509704788.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:28.759Z,1509704788.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:29.144Z,1509704789.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:29.159Z,1509704789.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:29.534Z,1509704789.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:29.549Z,1509704789.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:29.932Z,1509704789.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:29.948Z,1509704789.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:30.344Z,1509704790.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:30.359Z,1509704790.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:30.743Z,1509704790.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:30.763Z,1509704790.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:31.144Z,1509704791.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:31.206Z,1509704791.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:31.528Z,1509704791.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:31.571Z,1509704791.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:31.925Z,1509704791.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:31.950Z,1509704791.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:32.345Z,1509704792.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:32.405Z,1509704792.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:32.741Z,1509704792.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:32.756Z,1509704792.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:33.145Z,1509704793.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:33.202Z,1509704793.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:33.525Z,1509704793.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:33.594Z,1509704793.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:33.920Z,1509704793.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:33.950Z,1509704793.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:34.345Z,1509704794.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:34.361Z,1509704794.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:34.745Z,1509704794.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:34.760Z,1509704794.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:35.149Z,1509704795.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:35.173Z,1509704795.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:35.526Z,1509704795.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:35.551Z,1509704795.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:35.924Z,1509704795.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:35.950Z,1509704795.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:36.339Z,1509704796.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:36.359Z,1509704796.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:36.745Z,1509704796.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:36.760Z,1509704796.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:37.137Z,1509704797.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:37.160Z,1509704797.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:37.521Z,1509704797.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:37.554Z,1509704797.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:37.925Z,1509704797.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:37.954Z,1509704797.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:38.345Z,1509704798.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:38.361Z,1509704798.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:38.749Z,1509704798.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:38.764Z,1509704798.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:39.145Z,1509704799.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:39.167Z,1509704799.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:39.528Z,1509704799.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:39.554Z,1509704799.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:39.921Z,1509704799.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:39.956Z,1509704799.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:40.346Z,1509704800.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:40.367Z,1509704800.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:40.746Z,1509704800.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:40.761Z,1509704800.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:41.150Z,1509704801.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:41.165Z,1509704801.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:41.527Z,1509704801.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:41.553Z,1509704801.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:41.925Z,1509704801.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:41.952Z,1509704801.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:42.338Z,1509704802.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:42.361Z,1509704802.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:42.750Z,1509704802.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:42.766Z,1509704802.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:43.146Z,1509704803.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:43.165Z,1509704803.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:43.525Z,1509704803.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:43.555Z,1509704803.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:43.927Z,1509704803.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:43.954Z,1509704803.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:44.346Z,1509704804.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:44.380Z,1509704804.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:44.747Z,1509704804.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:44.773Z,1509704804.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:45.146Z,1509704805.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:45.162Z,1509704805.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:45.529Z,1509704805.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:45.618Z,1509704805.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:48.614Z,1509704808.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:48.629Z,1509704808.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:48.767Z,1509704808.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:48.806Z,1509704808.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:49.166Z,1509704809.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:49.215Z,1509704809.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:49.566Z,1509704809.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:49.584Z,1509704809.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:49.957Z,1509704809.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:50.012Z,1509704810.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:50.357Z,1509704810.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:50.415Z,1509704810.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:50.757Z,1509704810.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:50.773Z,1509704810.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:51.156Z,1509704811.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:51.175Z,1509704811.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:51.564Z,1509704811.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:51.580Z,1509704811.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:51.965Z,1509704811.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:51.979Z,1509704811.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:52.364Z,1509704812.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:52.381Z,1509704812.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:52.757Z,1509704812.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:52.775Z,1509704812.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:53.157Z,1509704813.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:53.172Z,1509704813.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:53.555Z,1509704813.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:53.571Z,1509704813.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:53.956Z,1509704813.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:53.971Z,1509704813.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:54.364Z,1509704814.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:54.383Z,1509704814.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:54.763Z,1509704814.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:54.779Z,1509704814.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:55.163Z,1509704815.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:55.179Z,1509704815.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:55.556Z,1509704815.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:55.570Z,1509704815.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:55.955Z,1509704815.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:55.973Z,1509704815.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:56.364Z,1509704816.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:56.379Z,1509704816.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:56.765Z,1509704816.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:56.779Z,1509704816.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:57.164Z,1509704817.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:57.181Z,1509704817.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:57.557Z,1509704817.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:57.576Z,1509704817.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:57.956Z,1509704817.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:57.970Z,1509704817.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:58.364Z,1509704818.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:58.379Z,1509704818.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:58.765Z,1509704818.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:58.783Z,1509704818.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:59.165Z,1509704819.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:59.184Z,1509704819.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:59.558Z,1509704819.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:59.573Z,1509704819.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:26:59.956Z,1509704819.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:26:59.972Z,1509704819.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:00.365Z,1509704820.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:00.383Z,1509704820.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:00.766Z,1509704820.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:00.784Z,1509704820.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:01.164Z,1509704821.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:01.179Z,1509704821.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:01.560Z,1509704821.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:01.575Z,1509704821.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:01.959Z,1509704821.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:01.975Z,1509704821.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:02.364Z,1509704822.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:02.446Z,1509704822.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:02.770Z,1509704822.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:02.785Z,1509704822.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:03.173Z,1509704823.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:03.189Z,1509704823.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:03.549Z,1509704823.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:03.612Z,1509704823.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:03.951Z,1509704823.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:03.980Z,1509704823.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:04.365Z,1509704824.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:04.422Z,1509704824.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:04.773Z,1509704824.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:04.789Z,1509704824.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:05.167Z,1509704825.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:05.218Z,1509704825.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:05.552Z,1509704825.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:05.581Z,1509704825.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:05.949Z,1509704825.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:05.979Z,1509704825.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:06.373Z,1509704826.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:06.389Z,1509704826.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:06.773Z,1509704826.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:06.791Z,1509704826.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:07.170Z,1509704827.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:07.187Z,1509704827.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:07.552Z,1509704827.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:07.577Z,1509704827.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:07.945Z,1509704827.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:07.974Z,1509704827.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:08.369Z,1509704828.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:08.391Z,1509704828.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:08.776Z,1509704828.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:08.791Z,1509704828.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:09.164Z,1509704829.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:09.200Z,1509704829.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:09.549Z,1509704829.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:09.575Z,1509704829.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:09.949Z,1509704829.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:09.974Z,1509704829.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:10.365Z,1509704830.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:10.384Z,1509704830.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:10.768Z,1509704830.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:10.783Z,1509704830.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:11.165Z,1509704831.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:11.180Z,1509704831.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:11.552Z,1509704831.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:11.578Z,1509704831.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:11.951Z,1509704831.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:11.980Z,1509704831.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:12.369Z,1509704832.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:12.385Z,1509704832.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:12.773Z,1509704832.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:12.790Z,1509704832.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:13.169Z,1509704833.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:13.188Z,1509704833.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:13.552Z,1509704833.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:13.582Z,1509704833.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:13.951Z,1509704833.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:13.977Z,1509704833.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:14.369Z,1509704834.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:14.385Z,1509704834.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:14.769Z,1509704834.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:14.819Z,1509704834.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:15.174Z,1509704835.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:15.190Z,1509704835.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:15.550Z,1509704835.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:15.595Z,1509704835.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:15.951Z,1509704835.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:15.977Z,1509704835.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:16.373Z,1509704836.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:16.391Z,1509704836.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:16.770Z,1509704836.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:16.788Z,1509704836.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:17.167Z,1509704837.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:17.251Z,1509704837.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:17.546Z,1509704837.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:17.577Z,1509704837.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:17.948Z,1509704837.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:18.007Z,1509704838.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:18.357Z,1509704838.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:18.385Z,1509704838.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:18.761Z,1509704838.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:18.829Z,1509704838.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:19.161Z,1509704839.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:19.229Z,1509704839.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:19.550Z,1509704839.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:19.564Z,1509704839.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:19.949Z,1509704839.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:19.964Z,1509704839.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:20.361Z,1509704840.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:20.385Z,1509704840.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:20.761Z,1509704840.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:20.805Z,1509704840.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:21.161Z,1509704841.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:21.190Z,1509704841.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:21.550Z,1509704841.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:21.565Z,1509704841.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:21.949Z,1509704841.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:21.963Z,1509704841.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:22.361Z,1509704842.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:22.385Z,1509704842.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:22.765Z,1509704842.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:22.793Z,1509704842.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:23.162Z,1509704843.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:23.195Z,1509704843.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:23.551Z,1509704843.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:23.566Z,1509704843.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:23.948Z,1509704843.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:23.965Z,1509704843.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:24.366Z,1509704844.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:24.394Z,1509704844.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:24.762Z,1509704844.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:24.790Z,1509704844.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:25.162Z,1509704845.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:25.206Z,1509704845.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:25.552Z,1509704845.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:25.566Z,1509704845.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:25.953Z,1509704845.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:25.967Z,1509704845.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:26.365Z,1509704846.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:26.394Z,1509704846.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:26.761Z,1509704846.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:26.809Z,1509704846.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:27.162Z,1509704847.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:27.199Z,1509704847.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:27.558Z,1509704847.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:27.595Z,1509704847.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:27.953Z,1509704847.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:27.969Z,1509704847.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:28.366Z,1509704848.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:28.397Z,1509704848.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:28.769Z,1509704848.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:28.801Z,1509704848.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:29.161Z,1509704849.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:29.176Z,1509704849.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:29.558Z,1509704849.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:29.577Z,1509704849.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:29.957Z,1509704849.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:29.973Z,1509704849.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:30.366Z,1509704850.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:30.381Z,1509704850.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:30.766Z,1509704850.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:30.803Z,1509704850.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:31.162Z,1509704851.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:31.219Z,1509704851.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:31.219Z,1509704851.219 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 204
2017-11-03T10:27:31.219Z,1509704851.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:27:31.225Z,1509704851.225 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:31.225Z,1509704851.225 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 204
2017-11-03T10:27:31.225Z,1509704851.225 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:27:31.227Z,1509704851.227 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:31.227Z,1509704851.227 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 204
2017-11-03T10:27:31.227Z,1509704851.227 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:27:31.325Z,1509704851.325 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:27:31.325Z,1509704851.325 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:27:31.325Z,1509704851.325 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:27:31.561Z,1509704851.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:31.700Z,1509704851.700 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:27:31.700Z,1509704851.700 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 204
2017-11-03T10:27:31.701Z,1509704851.701 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:27:31.701Z,1509704851.701 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 204
2017-11-03T10:27:31.701Z,1509704851.701 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:27:31.701Z,1509704851.701 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 204
2017-11-03T10:27:31.948Z,1509704851.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:31.970Z,1509704851.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:27:31.970Z,1509704851.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:27:31.971Z,1509704851.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:27:31.971Z,1509704851.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:27:31.971Z,1509704851.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:27:31.972Z,1509704851.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:27:31.972Z,1509704851.972 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:27:31.973Z,1509704851.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:27:31.973Z,1509704851.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:27:32.365Z,1509704852.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:32.382Z,1509704852.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:27:32.384Z,1509704852.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:32.770Z,1509704852.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:32.812Z,1509704852.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:27:32.813Z,1509704852.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:33.158Z,1509704853.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:33.188Z,1509704853.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:27:33.189Z,1509704853.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:33.557Z,1509704853.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:33.612Z,1509704853.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:27:33.613Z,1509704853.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:33.959Z,1509704853.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:34.017Z,1509704854.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:27:34.018Z,1509704854.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:34.373Z,1509704854.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:34.394Z,1509704854.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:27:34.395Z,1509704854.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:34.769Z,1509704854.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:34.784Z,1509704854.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:27:34.785Z,1509704854.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:35.173Z,1509704855.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:35.193Z,1509704855.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:27:35.195Z,1509704855.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:35.559Z,1509704855.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:35.574Z,1509704855.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:27:35.575Z,1509704855.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:35.957Z,1509704855.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:35.978Z,1509704855.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:27:35.979Z,1509704855.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:36.373Z,1509704856.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:36.387Z,1509704856.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:27:36.388Z,1509704856.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:36.765Z,1509704856.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:36.780Z,1509704856.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:27:36.781Z,1509704856.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:37.168Z,1509704857.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:37.187Z,1509704857.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:27:37.188Z,1509704857.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:37.560Z,1509704857.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:37.578Z,1509704857.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:27:37.579Z,1509704857.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:37.945Z,1509704857.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:37.970Z,1509704857.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:27:37.971Z,1509704857.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:38.368Z,1509704858.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:38.383Z,1509704858.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:27:38.384Z,1509704858.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:38.769Z,1509704858.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:38.788Z,1509704858.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:27:38.789Z,1509704858.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:39.165Z,1509704859.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:39.183Z,1509704859.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:27:39.184Z,1509704859.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:39.559Z,1509704859.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:39.574Z,1509704859.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:27:39.575Z,1509704859.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:39.945Z,1509704859.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:39.970Z,1509704859.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:27:39.971Z,1509704859.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:40.365Z,1509704860.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:40.382Z,1509704860.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:27:40.384Z,1509704860.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:40.771Z,1509704860.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:40.787Z,1509704860.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:27:40.789Z,1509704860.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:41.172Z,1509704861.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:41.187Z,1509704861.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:27:41.188Z,1509704861.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:41.560Z,1509704861.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:41.582Z,1509704861.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:27:41.583Z,1509704861.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:41.957Z,1509704861.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:41.974Z,1509704861.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:27:41.975Z,1509704861.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:42.365Z,1509704862.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:42.384Z,1509704862.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:27:42.385Z,1509704862.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:42.772Z,1509704862.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:42.794Z,1509704862.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:27:42.795Z,1509704862.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:43.172Z,1509704863.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:43.186Z,1509704863.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:27:43.188Z,1509704863.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:43.558Z,1509704863.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:43.572Z,1509704863.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:27:43.573Z,1509704863.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:43.959Z,1509704863.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:43.978Z,1509704863.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:27:43.979Z,1509704863.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:44.372Z,1509704864.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:44.387Z,1509704864.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:27:44.388Z,1509704864.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:44.772Z,1509704864.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:44.797Z,1509704864.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:27:44.798Z,1509704864.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:45.165Z,1509704865.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:45.182Z,1509704865.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:27:45.184Z,1509704865.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:45.561Z,1509704865.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:45.579Z,1509704865.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:27:45.580Z,1509704865.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:48.635Z,1509704868.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:48.730Z,1509704868.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-03T10:27:48.731Z,1509704868.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:48.873Z,1509704868.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:48.894Z,1509704868.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-03T10:27:48.895Z,1509704868.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:49.269Z,1509704869.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:49.283Z,1509704869.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-03T10:27:49.285Z,1509704869.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:49.669Z,1509704869.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:49.715Z,1509704869.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-03T10:27:49.716Z,1509704869.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:50.059Z,1509704870.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:50.073Z,1509704870.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-03T10:27:50.074Z,1509704870.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:50.457Z,1509704870.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:50.512Z,1509704870.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-03T10:27:50.513Z,1509704870.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:50.858Z,1509704870.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:50.895Z,1509704870.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-03T10:27:50.896Z,1509704870.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:51.259Z,1509704871.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:51.274Z,1509704871.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:51.669Z,1509704871.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:51.684Z,1509704871.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:52.066Z,1509704872.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:52.080Z,1509704872.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:52.465Z,1509704872.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:52.480Z,1509704872.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:52.857Z,1509704872.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:52.874Z,1509704872.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:53.259Z,1509704873.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:53.274Z,1509704873.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:53.659Z,1509704873.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:53.675Z,1509704873.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:54.059Z,1509704874.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:54.079Z,1509704874.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:54.472Z,1509704874.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:54.487Z,1509704874.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:54.872Z,1509704874.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:54.887Z,1509704874.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:55.269Z,1509704875.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:55.284Z,1509704875.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:55.658Z,1509704875.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:55.672Z,1509704875.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:56.059Z,1509704876.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:56.074Z,1509704876.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:56.457Z,1509704876.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:56.474Z,1509704876.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:56.860Z,1509704876.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:56.874Z,1509704876.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:57.244Z,1509704877.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:57.270Z,1509704877.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:57.668Z,1509704877.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:57.683Z,1509704877.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:58.070Z,1509704878.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:58.090Z,1509704878.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:58.472Z,1509704878.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:58.494Z,1509704878.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:58.857Z,1509704878.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:58.875Z,1509704878.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:59.258Z,1509704879.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:59.273Z,1509704879.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:27:59.659Z,1509704879.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:27:59.679Z,1509704879.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:00.049Z,1509704880.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:00.074Z,1509704880.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:00.474Z,1509704880.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:00.488Z,1509704880.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:00.872Z,1509704880.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:00.887Z,1509704880.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:01.268Z,1509704881.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:01.283Z,1509704881.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:01.651Z,1509704881.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:01.677Z,1509704881.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:02.051Z,1509704882.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:02.077Z,1509704882.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:02.451Z,1509704882.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:02.477Z,1509704882.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:02.850Z,1509704882.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:02.958Z,1509704882.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:03.251Z,1509704883.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:03.277Z,1509704883.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:03.669Z,1509704883.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:03.685Z,1509704883.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:04.076Z,1509704884.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:04.119Z,1509704884.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:04.465Z,1509704884.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:04.480Z,1509704884.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:04.849Z,1509704884.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:04.912Z,1509704884.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:05.249Z,1509704885.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:05.319Z,1509704885.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:05.652Z,1509704885.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:05.677Z,1509704885.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:06.049Z,1509704886.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:06.078Z,1509704886.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:06.473Z,1509704886.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:06.488Z,1509704886.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:06.873Z,1509704886.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:06.888Z,1509704886.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:07.269Z,1509704887.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:07.284Z,1509704887.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:07.651Z,1509704887.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:07.678Z,1509704887.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:08.051Z,1509704888.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:08.077Z,1509704888.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:08.449Z,1509704888.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:08.475Z,1509704888.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:08.852Z,1509704888.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:08.879Z,1509704888.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:09.249Z,1509704889.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:09.274Z,1509704889.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:09.673Z,1509704889.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:09.688Z,1509704889.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:10.070Z,1509704890.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:10.085Z,1509704890.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:10.473Z,1509704890.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:10.488Z,1509704890.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:10.849Z,1509704890.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:10.875Z,1509704890.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:11.260Z,1509704891.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:11.286Z,1509704891.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:11.647Z,1509704891.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:11.678Z,1509704891.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:12.049Z,1509704892.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:12.081Z,1509704892.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:12.462Z,1509704892.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:12.493Z,1509704892.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:12.872Z,1509704892.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:12.887Z,1509704892.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:13.271Z,1509704893.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:13.286Z,1509704893.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:13.648Z,1509704893.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:13.663Z,1509704893.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:14.051Z,1509704894.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:14.067Z,1509704894.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:14.450Z,1509704894.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:14.465Z,1509704894.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:14.852Z,1509704894.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:14.867Z,1509704894.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:15.249Z,1509704895.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:15.264Z,1509704895.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:15.665Z,1509704895.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:15.690Z,1509704895.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:16.061Z,1509704896.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:16.093Z,1509704896.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:16.465Z,1509704896.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:16.497Z,1509704896.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:16.853Z,1509704896.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:16.868Z,1509704896.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:17.252Z,1509704897.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:17.347Z,1509704897.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:17.654Z,1509704897.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:17.669Z,1509704897.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:18.052Z,1509704898.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:18.067Z,1509704898.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:18.466Z,1509704898.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:18.519Z,1509704898.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:18.866Z,1509704898.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:18.897Z,1509704898.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:19.262Z,1509704899.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:19.315Z,1509704899.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:19.656Z,1509704899.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:19.672Z,1509704899.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:20.056Z,1509704900.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:20.107Z,1509704900.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:20.455Z,1509704900.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:20.474Z,1509704900.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:20.857Z,1509704900.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:20.871Z,1509704900.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:21.252Z,1509704901.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:21.268Z,1509704901.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:21.662Z,1509704901.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:21.677Z,1509704901.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:22.069Z,1509704902.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:22.101Z,1509704902.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:22.470Z,1509704902.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:22.499Z,1509704902.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:22.856Z,1509704902.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:22.871Z,1509704902.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:23.256Z,1509704903.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:23.270Z,1509704903.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:23.656Z,1509704903.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:23.679Z,1509704903.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:24.056Z,1509704904.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:24.071Z,1509704904.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:24.469Z,1509704904.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:24.499Z,1509704904.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:24.869Z,1509704904.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:24.899Z,1509704904.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:25.261Z,1509704905.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:25.277Z,1509704905.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:25.656Z,1509704905.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:25.670Z,1509704905.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:26.056Z,1509704906.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:26.071Z,1509704906.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:26.456Z,1509704906.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:26.471Z,1509704906.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:26.856Z,1509704906.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:26.878Z,1509704906.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:27.256Z,1509704907.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:27.271Z,1509704907.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:27.661Z,1509704907.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:27.677Z,1509704907.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:28.069Z,1509704908.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:28.098Z,1509704908.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:28.470Z,1509704908.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:28.499Z,1509704908.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:28.856Z,1509704908.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:28.871Z,1509704908.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:29.256Z,1509704909.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:29.270Z,1509704909.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:29.656Z,1509704909.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:29.671Z,1509704909.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:30.055Z,1509704910.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:30.070Z,1509704910.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:30.461Z,1509704910.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:30.498Z,1509704910.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:30.870Z,1509704910.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:30.899Z,1509704910.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:31.269Z,1509704911.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:31.299Z,1509704911.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:31.655Z,1509704911.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:31.670Z,1509704911.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:32.056Z,1509704912.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:32.067Z,1509704912.067 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:28:32.067Z,1509704912.067 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:28:32.067Z,1509704912.067 [BPC1](ERROR): Data Fault
2017-11-03T10:28:32.075Z,1509704912.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:32.181Z,1509704912.181 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:28:32.456Z,1509704912.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:32.471Z,1509704912.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:32.856Z,1509704912.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:32.871Z,1509704912.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:33.256Z,1509704913.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:33.279Z,1509704913.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:33.377Z,1509704913.377 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:28:33.377Z,1509704913.377 [BPC1] No Fault, FailCount= 1
2017-11-03T10:28:33.669Z,1509704913.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:33.747Z,1509704913.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:34.057Z,1509704914.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:34.078Z,1509704914.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:34.469Z,1509704914.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:34.501Z,1509704914.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:34.856Z,1509704914.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:34.910Z,1509704914.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:35.254Z,1509704915.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:35.269Z,1509704915.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:35.657Z,1509704915.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:35.673Z,1509704915.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:36.054Z,1509704916.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:36.073Z,1509704916.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:36.469Z,1509704916.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:36.502Z,1509704916.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:36.869Z,1509704916.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:36.884Z,1509704916.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:37.269Z,1509704917.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:37.300Z,1509704917.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:37.655Z,1509704917.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:37.670Z,1509704917.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:38.056Z,1509704918.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:38.075Z,1509704918.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:38.456Z,1509704918.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:38.471Z,1509704918.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:38.856Z,1509704918.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:38.871Z,1509704918.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:39.256Z,1509704919.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:39.271Z,1509704919.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:39.661Z,1509704919.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:39.677Z,1509704919.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:40.069Z,1509704920.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:40.083Z,1509704920.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:40.462Z,1509704920.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:40.477Z,1509704920.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:40.856Z,1509704920.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:40.871Z,1509704920.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:41.256Z,1509704921.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:41.270Z,1509704921.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:41.656Z,1509704921.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:41.671Z,1509704921.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:42.054Z,1509704922.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:42.073Z,1509704922.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:42.469Z,1509704922.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:42.504Z,1509704922.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:42.869Z,1509704922.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:42.901Z,1509704922.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:43.261Z,1509704923.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:43.276Z,1509704923.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:43.656Z,1509704923.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:43.671Z,1509704923.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:44.056Z,1509704924.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:44.072Z,1509704924.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:44.454Z,1509704924.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:44.473Z,1509704924.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:44.856Z,1509704924.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:44.871Z,1509704924.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:45.256Z,1509704925.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:45.275Z,1509704925.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:45.279Z,1509704925.279 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T10:23:45.2Z
2017-11-03T10:28:45.279Z,1509704925.279 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T10:28:45.279Z,1509704925.279 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T10:28:45.670Z,1509704925.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:45.701Z,1509704925.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:48.954Z,1509704928.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:49.043Z,1509704929.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:49.157Z,1509704929.157 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0240.lzma
2017-11-03T10:28:49.203Z,1509704929.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:49.228Z,1509704929.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:49.581Z,1509704929.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:49.647Z,1509704929.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:49.955Z,1509704929.955 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0240.lzma.bak
2017-11-03T10:28:49.955Z,1509704929.955 [DataOverHttps](INFO): SBD MOMSN=5183341
2017-11-03T10:28:49.978Z,1509704929.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:50.030Z,1509704930.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:50.595Z,1509704930.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:50.650Z,1509704930.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:50.778Z,1509704930.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:50.815Z,1509704930.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:53.884Z,1509704933.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:53.899Z,1509704933.899 [PNI_TCM](ERROR): CRC does not match. Expected:0x20807 got:0x20073
2017-11-03T10:28:53.899Z,1509704933.899 [PNI_TCM](ERROR): CRC does not match. Expected:0x55689 got:0x20152
2017-11-03T10:28:53.899Z,1509704933.899 [PNI_TCM](ERROR): CRC does not match. Expected:0x50454 got:0x20111
2017-11-03T10:28:53.900Z,1509704933.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x19132 got:0x20095
2017-11-03T10:28:53.900Z,1509704933.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x29031 got:0x20115
2017-11-03T10:28:53.900Z,1509704933.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x40295 got:0x20085
2017-11-03T10:28:53.901Z,1509704933.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x30070 got:0x20044
2017-11-03T10:28:53.973Z,1509704933.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:54.113Z,1509704934.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:54.135Z,1509704934.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:54.512Z,1509704934.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:54.528Z,1509704934.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:54.902Z,1509704934.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:54.918Z,1509704934.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:55.304Z,1509704935.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:55.320Z,1509704935.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:55.706Z,1509704935.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:55.721Z,1509704935.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:58.773Z,1509704938.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:58.808Z,1509704938.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:58.913Z,1509704938.913 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20171103T001125/Express0241.lzma
2017-11-03T10:28:58.962Z,1509704938.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:58.986Z,1509704938.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:59.354Z,1509704939.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:59.369Z,1509704939.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:28:59.712Z,1509704939.712 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0241.lzma.bak
2017-11-03T10:28:59.712Z,1509704939.712 [DataOverHttps](INFO): SBD MOMSN=5183343
2017-11-03T10:28:59.758Z,1509704939.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:28:59.794Z,1509704939.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:00.343Z,1509704940.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:00.366Z,1509704940.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:00.369Z,1509704940.369 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T10:29:00.369Z,1509704940.369 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T10:29:00.369Z,1509704940.369 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T10:29:00.546Z,1509704940.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:00.578Z,1509704940.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:03.645Z,1509704943.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:03.669Z,1509704943.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:03.782Z,1509704943.782 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T10:29:03.782Z,1509704943.782 [NAL9602] Data Fault, FailCount= 1
2017-11-03T10:29:03.783Z,1509704943.783 [NAL9602](ERROR): Data Fault
2017-11-03T10:29:03.813Z,1509704943.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:03.844Z,1509704943.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:03.933Z,1509704943.933 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T10:29:04.186Z,1509704944.186 [NAL9602](INFO): Powering down
2017-11-03T10:29:04.213Z,1509704944.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:04.235Z,1509704944.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:04.600Z,1509704944.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:04.626Z,1509704944.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:04.999Z,1509704944.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:05.025Z,1509704945.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:05.117Z,1509704945.117 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T10:29:05.117Z,1509704945.117 [NAL9602] No Fault, FailCount= 1
2017-11-03T10:29:05.399Z,1509704945.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:05.443Z,1509704945.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:05.815Z,1509704945.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:05.851Z,1509704945.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:06.211Z,1509704946.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:06.226Z,1509704946.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:06.610Z,1509704946.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:06.624Z,1509704946.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:07.011Z,1509704947.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:07.026Z,1509704947.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:07.411Z,1509704947.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:07.426Z,1509704947.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:07.811Z,1509704947.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:07.830Z,1509704947.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:08.210Z,1509704948.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:08.226Z,1509704948.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:08.596Z,1509704948.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:08.628Z,1509704948.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:09.002Z,1509704949.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:09.022Z,1509704949.022 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:29:09.022Z,1509704949.022 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:29:09.022Z,1509704949.022 [BPC1](ERROR): Communications Fault
2017-11-03T10:29:09.030Z,1509704949.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:09.117Z,1509704949.117 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:29:09.400Z,1509704949.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:09.432Z,1509704949.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:09.797Z,1509704949.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:09.824Z,1509704949.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:10.200Z,1509704950.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:10.238Z,1509704950.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:10.321Z,1509704950.321 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:29:10.321Z,1509704950.321 [BPC1] No Fault, FailCount= 1
2017-11-03T10:29:10.596Z,1509704950.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:10.679Z,1509704950.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:10.000Z,1509704951.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:11.031Z,1509704951.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:11.404Z,1509704951.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:11.453Z,1509704951.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:11.808Z,1509704951.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:11.839Z,1509704951.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:12.203Z,1509704952.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:12.238Z,1509704952.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:12.602Z,1509704952.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:12.645Z,1509704952.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:12.000Z,1509704953.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:13.016Z,1509704953.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:13.402Z,1509704953.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:13.419Z,1509704953.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:13.799Z,1509704953.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:13.815Z,1509704953.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:14.199Z,1509704954.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:14.214Z,1509704954.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:14.599Z,1509704954.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:14.614Z,1509704954.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:14.999Z,1509704954.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:15.014Z,1509704955.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:15.399Z,1509704955.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:15.418Z,1509704955.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:15.809Z,1509704955.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:15.847Z,1509704955.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:16.199Z,1509704956.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:16.218Z,1509704956.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:16.599Z,1509704956.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:16.658Z,1509704956.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:16.996Z,1509704956.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:17.011Z,1509704957.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:17.402Z,1509704957.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:17.443Z,1509704957.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:17.796Z,1509704957.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:17.811Z,1509704957.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:18.202Z,1509704958.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:18.251Z,1509704958.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:18.602Z,1509704958.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:18.617Z,1509704958.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:19.002Z,1509704959.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:19.043Z,1509704959.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:19.396Z,1509704959.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:19.411Z,1509704959.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:19.803Z,1509704959.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:19.817Z,1509704959.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:20.210Z,1509704960.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:20.225Z,1509704960.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:20.602Z,1509704960.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:20.617Z,1509704960.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:21.002Z,1509704961.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:21.017Z,1509704961.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:21.394Z,1509704961.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:21.414Z,1509704961.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:21.803Z,1509704961.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:21.823Z,1509704961.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:22.199Z,1509704962.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:22.230Z,1509704962.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:22.598Z,1509704962.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:22.613Z,1509704962.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:22.996Z,1509704962.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:23.011Z,1509704963.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:23.402Z,1509704963.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:23.439Z,1509704963.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:23.803Z,1509704963.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:23.839Z,1509704963.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:24.202Z,1509704964.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:24.234Z,1509704964.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:24.604Z,1509704964.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:24.632Z,1509704964.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:25.006Z,1509704965.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:25.035Z,1509704965.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:25.402Z,1509704965.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:25.425Z,1509704965.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:25.803Z,1509704965.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:25.838Z,1509704965.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:26.199Z,1509704966.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:26.237Z,1509704966.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:26.644Z,1509704966.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:26.659Z,1509704966.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:27.002Z,1509704967.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:27.036Z,1509704967.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:27.399Z,1509704967.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:27.414Z,1509704967.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:27.801Z,1509704967.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:27.815Z,1509704967.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:28.200Z,1509704968.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:28.215Z,1509704968.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:28.600Z,1509704968.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:28.614Z,1509704968.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:29.006Z,1509704969.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:29.036Z,1509704969.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:29.403Z,1509704969.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:29.434Z,1509704969.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:29.799Z,1509704969.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:29.851Z,1509704969.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:30.199Z,1509704970.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:30.235Z,1509704970.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:30.600Z,1509704970.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:30.614Z,1509704970.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:30.000Z,1509704971.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:31.059Z,1509704971.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:31.399Z,1509704971.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:31.414Z,1509704971.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:31.800Z,1509704971.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:31.843Z,1509704971.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:32.199Z,1509704972.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:32.213Z,1509704972.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:32.603Z,1509704972.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:32.658Z,1509704972.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:33.003Z,1509704973.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:33.048Z,1509704973.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:33.399Z,1509704973.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:33.413Z,1509704973.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:33.804Z,1509704973.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:33.819Z,1509704973.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:34.190Z,1509704974.190 [NAL9602](INFO): Powering up NAL9602
2017-11-03T10:29:34.208Z,1509704974.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:34.226Z,1509704974.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:34.599Z,1509704974.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:34.613Z,1509704974.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:35.003Z,1509704975.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:35.018Z,1509704975.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:35.403Z,1509704975.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:35.418Z,1509704975.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:35.799Z,1509704975.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:35.818Z,1509704975.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:36.207Z,1509704976.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:36.227Z,1509704976.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:36.599Z,1509704976.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:36.615Z,1509704976.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:36.999Z,1509704976.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:37.013Z,1509704977.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:37.404Z,1509704977.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:37.419Z,1509704977.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:37.804Z,1509704977.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:37.819Z,1509704977.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:38.199Z,1509704978.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:38.213Z,1509704978.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:38.603Z,1509704978.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:38.619Z,1509704978.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:39.003Z,1509704979.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:39.018Z,1509704979.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:39.406Z,1509704979.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:39.426Z,1509704979.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:39.804Z,1509704979.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:39.827Z,1509704979.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:40.203Z,1509704980.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:40.223Z,1509704980.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:40.606Z,1509704980.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:40.626Z,1509704980.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:41.007Z,1509704981.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:41.027Z,1509704981.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:41.403Z,1509704981.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:41.423Z,1509704981.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:41.807Z,1509704981.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:41.826Z,1509704981.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:42.207Z,1509704982.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:42.227Z,1509704982.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:42.604Z,1509704982.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:42.623Z,1509704982.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:42.999Z,1509704982.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:43.014Z,1509704983.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:43.407Z,1509704983.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:43.466Z,1509704983.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:43.808Z,1509704983.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:43.823Z,1509704983.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:44.207Z,1509704984.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:44.222Z,1509704984.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:44.605Z,1509704984.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:44.620Z,1509704984.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:45.014Z,1509704985.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:45.029Z,1509704985.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:45.380Z,1509704985.380 [NAL9602](INFO): NAL9602 initialized
2017-11-03T10:29:45.410Z,1509704985.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:45.429Z,1509704985.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:45.814Z,1509704985.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:45.829Z,1509704985.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:46.214Z,1509704986.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:46.229Z,1509704986.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:46.610Z,1509704986.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:46.631Z,1509704986.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:47.022Z,1509704987.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:47.050Z,1509704987.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:47.410Z,1509704987.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:47.425Z,1509704987.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:47.810Z,1509704987.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:47.826Z,1509704987.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:48.209Z,1509704988.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:48.219Z,1509704988.219 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:29:48.219Z,1509704988.219 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:29:48.219Z,1509704988.219 [BPC1](ERROR): Communications Fault
2017-11-03T10:29:48.227Z,1509704988.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:48.329Z,1509704988.329 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:29:48.609Z,1509704988.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:48.626Z,1509704988.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:49.021Z,1509704989.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:49.054Z,1509704989.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:49.410Z,1509704989.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:49.425Z,1509704989.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:49.517Z,1509704989.517 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:29:49.517Z,1509704989.517 [BPC1] No Fault, FailCount= 1
2017-11-03T10:29:49.821Z,1509704989.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:49.903Z,1509704989.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:50.206Z,1509704990.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:50.227Z,1509704990.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:50.608Z,1509704990.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:50.663Z,1509704990.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:51.010Z,1509704991.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:51.025Z,1509704991.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:51.404Z,1509704991.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:51.420Z,1509704991.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:51.826Z,1509704991.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:51.855Z,1509704991.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:52.223Z,1509704992.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:52.253Z,1509704992.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:52.623Z,1509704992.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:52.654Z,1509704992.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:53.004Z,1509704993.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:53.019Z,1509704993.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:53.409Z,1509704993.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:53.425Z,1509704993.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:53.804Z,1509704993.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:53.819Z,1509704993.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:54.205Z,1509704994.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:54.219Z,1509704994.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:54.611Z,1509704994.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:54.631Z,1509704994.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:55.013Z,1509704995.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:55.029Z,1509704995.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:55.411Z,1509704995.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:55.427Z,1509704995.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:55.817Z,1509704995.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:55.833Z,1509704995.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:56.210Z,1509704996.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:56.225Z,1509704996.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:56.604Z,1509704996.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:56.619Z,1509704996.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:57.010Z,1509704997.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:57.025Z,1509704997.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:57.410Z,1509704997.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:57.425Z,1509704997.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:57.826Z,1509704997.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:57.857Z,1509704997.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:58.214Z,1509704998.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:58.229Z,1509704998.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:58.614Z,1509704998.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:58.629Z,1509704998.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:59.010Z,1509704999.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:59.025Z,1509704999.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:59.410Z,1509704999.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:59.425Z,1509704999.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:29:59.809Z,1509704999.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:29:59.825Z,1509704999.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:00.202Z,1509705000.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:00.218Z,1509705000.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:00.612Z,1509705000.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:00.627Z,1509705000.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:01.017Z,1509705001.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:01.025Z,1509705001.025 [BPC1](ERROR): Failed to parse message.
2017-11-03T10:30:01.025Z,1509705001.025 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T10:30:01.026Z,1509705001.026 [BPC1] Data Fault, FailCount= 2
2017-11-03T10:30:01.026Z,1509705001.026 [BPC1](ERROR): Data Fault
2017-11-03T10:30:01.034Z,1509705001.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:01.133Z,1509705001.133 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:30:04.111Z,1509705004.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:04.140Z,1509705004.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:04.313Z,1509705004.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:04.347Z,1509705004.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:04.690Z,1509705004.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:04.723Z,1509705004.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:04.808Z,1509705004.808 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:30:04.808Z,1509705004.808 [BPC1] No Fault, FailCount= 2
2017-11-03T10:30:05.088Z,1509705005.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:05.174Z,1509705005.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:05.488Z,1509705005.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:05.519Z,1509705005.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:05.901Z,1509705005.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:05.960Z,1509705005.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:06.314Z,1509705006.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:06.329Z,1509705006.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:06.701Z,1509705006.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:06.735Z,1509705006.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:07.088Z,1509705007.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:07.125Z,1509705007.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:07.491Z,1509705007.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:07.522Z,1509705007.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:07.891Z,1509705007.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:07.928Z,1509705007.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:08.291Z,1509705008.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:08.306Z,1509705008.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:08.688Z,1509705008.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:08.703Z,1509705008.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:09.101Z,1509705009.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:09.125Z,1509705009.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:09.515Z,1509705009.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:09.530Z,1509705009.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:09.901Z,1509705009.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:09.928Z,1509705009.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:10.021Z,1509705010.021 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:30:10.021Z,1509705010.021 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T10:30:10.060Z,1509705010.060 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:30:10.061Z,1509705010.061 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:30:10.061Z,1509705010.061 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:30:10.061Z,1509705010.061 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:30:10.295Z,1509705010.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:10.330Z,1509705010.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:10.689Z,1509705010.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:10.703Z,1509705010.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:11.089Z,1509705011.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:11.104Z,1509705011.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:11.491Z,1509705011.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:11.527Z,1509705011.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:11.901Z,1509705011.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:11.926Z,1509705011.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:12.301Z,1509705012.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:12.327Z,1509705012.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:12.701Z,1509705012.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:12.726Z,1509705012.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:13.088Z,1509705013.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:13.126Z,1509705013.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:13.488Z,1509705013.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:13.503Z,1509705013.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:13.887Z,1509705013.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:13.907Z,1509705013.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:14.185Z,1509705014.185 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:30:14.243Z,1509705014.243 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:30:14.245Z,1509705014.245 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:30:14.245Z,1509705014.245 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:30:14.246Z,1509705014.246 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:30:14.307Z,1509705014.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:14.338Z,1509705014.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:14.698Z,1509705014.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:14.714Z,1509705014.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:15.135Z,1509705015.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:15.207Z,1509705015.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:15.510Z,1509705015.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:15.541Z,1509705015.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:15.901Z,1509705015.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:15.917Z,1509705015.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:16.297Z,1509705016.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:16.382Z,1509705016.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:16.692Z,1509705016.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:16.707Z,1509705016.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:17.101Z,1509705017.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:17.151Z,1509705017.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:17.498Z,1509705017.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:17.519Z,1509705017.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:17.909Z,1509705017.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:17.961Z,1509705017.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:18.314Z,1509705018.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:18.330Z,1509705018.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:18.709Z,1509705018.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:18.766Z,1509705018.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:19.091Z,1509705019.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:19.119Z,1509705019.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:19.491Z,1509705019.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:19.518Z,1509705019.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:19.903Z,1509705019.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:19.931Z,1509705019.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:20.288Z,1509705020.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:20.327Z,1509705020.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:20.687Z,1509705020.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:20.703Z,1509705020.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:21.105Z,1509705021.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:21.135Z,1509705021.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:21.501Z,1509705021.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:21.526Z,1509705021.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:21.917Z,1509705021.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:21.950Z,1509705021.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:22.295Z,1509705022.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:22.311Z,1509705022.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:22.692Z,1509705022.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:22.706Z,1509705022.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:23.094Z,1509705023.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:23.110Z,1509705023.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:23.496Z,1509705023.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:23.515Z,1509705023.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:23.905Z,1509705023.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:23.921Z,1509705023.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:24.305Z,1509705024.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:24.320Z,1509705024.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:24.702Z,1509705024.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:24.717Z,1509705024.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:25.098Z,1509705025.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:25.113Z,1509705025.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:25.499Z,1509705025.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:25.514Z,1509705025.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:25.907Z,1509705025.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:25.951Z,1509705025.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:26.298Z,1509705026.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:26.313Z,1509705026.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:26.698Z,1509705026.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:26.714Z,1509705026.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:27.106Z,1509705027.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:27.121Z,1509705027.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:27.505Z,1509705027.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:27.542Z,1509705027.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:27.934Z,1509705027.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:27.949Z,1509705027.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:28.296Z,1509705028.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:28.312Z,1509705028.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:28.696Z,1509705028.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:28.711Z,1509705028.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:29.101Z,1509705029.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:29.178Z,1509705029.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:29.499Z,1509705029.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:29.519Z,1509705029.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:29.907Z,1509705029.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:29.955Z,1509705029.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:30.309Z,1509705030.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:30.325Z,1509705030.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:30.708Z,1509705030.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:30.755Z,1509705030.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:31.084Z,1509705031.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:31.111Z,1509705031.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:31.499Z,1509705031.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:31.554Z,1509705031.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:31.899Z,1509705031.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:31.919Z,1509705031.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:32.299Z,1509705032.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:32.314Z,1509705032.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:32.314Z,1509705032.314 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 205
2017-11-03T10:30:32.314Z,1509705032.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:30:32.316Z,1509705032.316 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:32.316Z,1509705032.316 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 205
2017-11-03T10:30:32.316Z,1509705032.316 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:30:32.318Z,1509705032.318 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:32.318Z,1509705032.318 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 205
2017-11-03T10:30:32.318Z,1509705032.318 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:30:32.407Z,1509705032.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:30:32.407Z,1509705032.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:30:32.407Z,1509705032.407 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:30:32.708Z,1509705032.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:32.804Z,1509705032.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:30:32.805Z,1509705032.805 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 205
2017-11-03T10:30:32.805Z,1509705032.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:30:32.805Z,1509705032.805 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 205
2017-11-03T10:30:32.806Z,1509705032.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:30:32.806Z,1509705032.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 205
2017-11-03T10:30:33.110Z,1509705033.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:33.123Z,1509705033.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:30:33.124Z,1509705033.124 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:30:33.124Z,1509705033.124 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:30:33.125Z,1509705033.125 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:30:33.125Z,1509705033.125 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:30:33.126Z,1509705033.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:30:33.126Z,1509705033.126 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:30:33.126Z,1509705033.126 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:30:33.127Z,1509705033.127 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:30:33.510Z,1509705033.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:33.525Z,1509705033.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:33.902Z,1509705033.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:33.927Z,1509705033.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:34.289Z,1509705034.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:34.304Z,1509705034.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:34.691Z,1509705034.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:34.731Z,1509705034.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:35.092Z,1509705035.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:35.108Z,1509705035.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:35.489Z,1509705035.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:35.505Z,1509705035.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:35.906Z,1509705035.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:35.921Z,1509705035.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:36.305Z,1509705036.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:36.321Z,1509705036.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:36.702Z,1509705036.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:36.719Z,1509705036.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:37.097Z,1509705037.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:37.120Z,1509705037.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:37.498Z,1509705037.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:37.514Z,1509705037.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:37.887Z,1509705037.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:37.923Z,1509705037.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:38.298Z,1509705038.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:38.314Z,1509705038.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:38.698Z,1509705038.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:38.715Z,1509705038.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:39.110Z,1509705039.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:39.125Z,1509705039.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:39.509Z,1509705039.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:39.531Z,1509705039.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:39.910Z,1509705039.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:39.934Z,1509705039.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:40.288Z,1509705040.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:40.313Z,1509705040.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:40.688Z,1509705040.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:40.719Z,1509705040.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:41.099Z,1509705041.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:41.115Z,1509705041.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:41.496Z,1509705041.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:41.511Z,1509705041.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:41.938Z,1509705041.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:41.953Z,1509705041.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:42.306Z,1509705042.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:42.351Z,1509705042.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:42.697Z,1509705042.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:42.758Z,1509705042.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:43.097Z,1509705043.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:43.113Z,1509705043.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:43.496Z,1509705043.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:43.512Z,1509705043.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:43.902Z,1509705043.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:43.951Z,1509705043.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:44.295Z,1509705044.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:44.314Z,1509705044.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:44.731Z,1509705044.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:44.799Z,1509705044.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:45.104Z,1509705045.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:45.151Z,1509705045.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:45.503Z,1509705045.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:45.522Z,1509705045.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:45.905Z,1509705045.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:45.920Z,1509705045.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:46.295Z,1509705046.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:46.315Z,1509705046.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:46.696Z,1509705046.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:46.711Z,1509705046.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:47.100Z,1509705047.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:47.115Z,1509705047.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:47.492Z,1509705047.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:47.507Z,1509705047.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:47.921Z,1509705047.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:47.936Z,1509705047.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:48.314Z,1509705048.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:48.329Z,1509705048.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:48.709Z,1509705048.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:48.725Z,1509705048.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:49.087Z,1509705049.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:49.124Z,1509705049.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:49.491Z,1509705049.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:49.522Z,1509705049.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:49.907Z,1509705049.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:49.936Z,1509705049.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:50.292Z,1509705050.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:50.307Z,1509705050.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:50.691Z,1509705050.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:50.706Z,1509705050.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:51.109Z,1509705051.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:51.133Z,1509705051.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:51.505Z,1509705051.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:51.535Z,1509705051.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:51.904Z,1509705051.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:51.927Z,1509705051.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:52.296Z,1509705052.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:52.311Z,1509705052.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:52.696Z,1509705052.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:52.718Z,1509705052.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:53.097Z,1509705053.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:53.113Z,1509705053.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:53.499Z,1509705053.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:53.519Z,1509705053.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:53.903Z,1509705053.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:53.926Z,1509705053.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:54.305Z,1509705054.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:54.320Z,1509705054.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:54.704Z,1509705054.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:54.719Z,1509705054.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:55.111Z,1509705055.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:55.148Z,1509705055.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:55.525Z,1509705055.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:55.605Z,1509705055.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:55.953Z,1509705055.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:55.978Z,1509705055.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:56.297Z,1509705056.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:56.417Z,1509705056.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:56.705Z,1509705056.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:56.743Z,1509705056.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:57.108Z,1509705057.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:57.140Z,1509705057.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:57.505Z,1509705057.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:57.559Z,1509705057.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:57.904Z,1509705057.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:57.928Z,1509705057.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:58.303Z,1509705058.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:58.363Z,1509705058.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:58.695Z,1509705058.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:58.756Z,1509705058.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:59.104Z,1509705059.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:59.147Z,1509705059.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:59.494Z,1509705059.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:30:59.545Z,1509705059.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:30:59.920Z,1509705059.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:00.002Z,1509705060.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:00.308Z,1509705060.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:00.351Z,1509705060.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:00.706Z,1509705060.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:00.763Z,1509705060.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:01.117Z,1509705061.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:01.174Z,1509705061.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:09.337Z,1509705069.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:09.463Z,1509705069.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:09.625Z,1509705069.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:09.665Z,1509705069.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:10.018Z,1509705070.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:10.063Z,1509705070.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:10.419Z,1509705070.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:10.471Z,1509705070.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:10.817Z,1509705070.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:10.859Z,1509705070.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:11.213Z,1509705071.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:11.271Z,1509705071.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:11.616Z,1509705071.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:11.675Z,1509705071.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:12.002Z,1509705072.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:12.039Z,1509705072.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:12.403Z,1509705072.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:12.451Z,1509705072.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:12.831Z,1509705072.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:12.875Z,1509705072.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:13.223Z,1509705073.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:13.247Z,1509705073.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:13.619Z,1509705073.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:13.670Z,1509705073.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:14.012Z,1509705074.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:14.079Z,1509705074.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:14.403Z,1509705074.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:14.446Z,1509705074.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:14.841Z,1509705074.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:14.881Z,1509705074.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:15.200Z,1509705075.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:15.247Z,1509705075.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:15.634Z,1509705075.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:15.706Z,1509705075.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:16.026Z,1509705076.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:16.041Z,1509705076.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:16.421Z,1509705076.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:16.436Z,1509705076.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:16.820Z,1509705076.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:16.843Z,1509705076.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:17.206Z,1509705077.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:17.239Z,1509705077.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:17.633Z,1509705077.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:17.695Z,1509705077.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:18.004Z,1509705078.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:18.035Z,1509705078.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:18.400Z,1509705078.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:18.430Z,1509705078.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:18.824Z,1509705078.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:18.839Z,1509705078.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:19.228Z,1509705079.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:19.243Z,1509705079.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:19.638Z,1509705079.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:19.682Z,1509705079.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:20.003Z,1509705080.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:20.078Z,1509705080.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:20.406Z,1509705080.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:20.439Z,1509705080.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:20.803Z,1509705080.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:20.809Z,1509705080.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x27522 got:0x7943
2017-11-03T10:31:20.838Z,1509705080.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:21.202Z,1509705081.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:21.238Z,1509705081.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:21.603Z,1509705081.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:21.681Z,1509705081.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:22.016Z,1509705082.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:22.070Z,1509705082.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:22.419Z,1509705082.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:22.470Z,1509705082.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:22.818Z,1509705082.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:22.833Z,1509705082.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:23.211Z,1509705083.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:23.267Z,1509705083.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:23.677Z,1509705083.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:23.738Z,1509705083.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:24.009Z,1509705084.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:24.063Z,1509705084.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:24.412Z,1509705084.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:24.467Z,1509705084.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:24.820Z,1509705084.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:24.835Z,1509705084.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:25.221Z,1509705085.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:25.254Z,1509705085.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:25.619Z,1509705085.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:25.639Z,1509705085.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:26.014Z,1509705086.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:26.029Z,1509705086.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:26.409Z,1509705086.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:26.437Z,1509705086.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:26.813Z,1509705086.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:26.840Z,1509705086.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:27.231Z,1509705087.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:27.279Z,1509705087.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:27.611Z,1509705087.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:27.626Z,1509705087.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:28.023Z,1509705088.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:28.039Z,1509705088.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:28.430Z,1509705088.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:28.446Z,1509705088.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:28.818Z,1509705088.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:28.837Z,1509705088.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:29.203Z,1509705089.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:29.239Z,1509705089.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:29.650Z,1509705089.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:29.683Z,1509705089.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:30.006Z,1509705090.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:30.039Z,1509705090.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:30.402Z,1509705090.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:30.435Z,1509705090.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:30.822Z,1509705090.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:30.840Z,1509705090.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:31.225Z,1509705091.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:31.244Z,1509705091.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:31.641Z,1509705091.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:31.685Z,1509705091.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:32.003Z,1509705092.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:32.034Z,1509705092.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:32.404Z,1509705092.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:32.439Z,1509705092.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:32.800Z,1509705092.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:32.832Z,1509705092.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:33.206Z,1509705093.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:33.239Z,1509705093.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:33.642Z,1509705093.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:33.663Z,1509705093.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:34.020Z,1509705094.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:34.035Z,1509705094.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:34.426Z,1509705094.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:34.441Z,1509705094.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:34.824Z,1509705094.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:34.840Z,1509705094.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:35.206Z,1509705095.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:35.280Z,1509705095.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:35.619Z,1509705095.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:35.694Z,1509705095.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:36.002Z,1509705096.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:36.055Z,1509705096.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:36.403Z,1509705096.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:36.440Z,1509705096.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:36.813Z,1509705096.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:36.871Z,1509705096.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:37.217Z,1509705097.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:37.286Z,1509705097.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:37.618Z,1509705097.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:37.647Z,1509705097.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:38.007Z,1509705098.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:38.038Z,1509705098.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:38.402Z,1509705098.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:38.418Z,1509705098.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:38.811Z,1509705098.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:38.841Z,1509705098.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:39.202Z,1509705099.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:39.218Z,1509705099.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:39.609Z,1509705099.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:39.640Z,1509705099.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:40.014Z,1509705100.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:40.037Z,1509705100.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:40.416Z,1509705100.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:40.458Z,1509705100.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:40.816Z,1509705100.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:40.831Z,1509705100.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:41.215Z,1509705101.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:41.235Z,1509705101.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:41.615Z,1509705101.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:41.635Z,1509705101.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:42.012Z,1509705102.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:42.035Z,1509705102.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:42.406Z,1509705102.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:42.421Z,1509705102.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:42.821Z,1509705102.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:42.836Z,1509705102.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:43.217Z,1509705103.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:43.233Z,1509705103.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:43.650Z,1509705103.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:43.681Z,1509705103.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:44.009Z,1509705104.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:44.025Z,1509705104.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:44.409Z,1509705104.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:44.431Z,1509705104.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:44.810Z,1509705104.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:44.831Z,1509705104.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:45.202Z,1509705105.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:45.229Z,1509705105.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:45.637Z,1509705105.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:45.689Z,1509705105.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:46.023Z,1509705106.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:46.038Z,1509705106.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:46.422Z,1509705106.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:46.438Z,1509705106.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:46.824Z,1509705106.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:46.840Z,1509705106.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:47.203Z,1509705107.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:47.229Z,1509705107.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:47.653Z,1509705107.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:47.686Z,1509705107.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:48.003Z,1509705108.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:48.055Z,1509705108.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:48.403Z,1509705108.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:48.429Z,1509705108.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:48.826Z,1509705108.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:48.841Z,1509705108.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:49.218Z,1509705109.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:49.282Z,1509705109.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:49.643Z,1509705109.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:49.694Z,1509705109.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:50.004Z,1509705110.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:50.074Z,1509705110.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:50.400Z,1509705110.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:50.434Z,1509705110.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:50.802Z,1509705110.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:50.937Z,1509705110.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:51.207Z,1509705111.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:51.234Z,1509705111.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:51.603Z,1509705111.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:51.655Z,1509705111.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:52.009Z,1509705112.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:52.035Z,1509705112.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:52.427Z,1509705112.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:52.442Z,1509705112.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:52.821Z,1509705112.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:52.837Z,1509705112.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:53.204Z,1509705113.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:53.234Z,1509705113.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:53.603Z,1509705113.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:53.634Z,1509705113.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:54.007Z,1509705114.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:54.033Z,1509705114.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:54.417Z,1509705114.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:54.455Z,1509705114.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:54.816Z,1509705114.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:54.832Z,1509705114.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:55.213Z,1509705115.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:55.229Z,1509705115.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:55.616Z,1509705115.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:55.631Z,1509705115.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:56.016Z,1509705116.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:56.031Z,1509705116.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:56.407Z,1509705116.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:56.426Z,1509705116.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:56.808Z,1509705116.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:56.824Z,1509705116.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:57.209Z,1509705117.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:57.227Z,1509705117.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:57.688Z,1509705117.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:57.747Z,1509705117.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:58.014Z,1509705118.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:58.029Z,1509705118.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:58.414Z,1509705118.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:58.429Z,1509705118.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:58.816Z,1509705118.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:58.832Z,1509705118.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:58.929Z,1509705118.929 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T10:31:59.214Z,1509705119.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:59.230Z,1509705119.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:31:59.644Z,1509705119.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:31:59.681Z,1509705119.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:00.009Z,1509705120.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:00.025Z,1509705120.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:00.411Z,1509705120.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:00.427Z,1509705120.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:00.818Z,1509705120.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:00.833Z,1509705120.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:01.218Z,1509705121.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:01.234Z,1509705121.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:04.609Z,1509705124.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:04.683Z,1509705124.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:04.822Z,1509705124.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:04.849Z,1509705124.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:05.223Z,1509705125.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:05.239Z,1509705125.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:05.620Z,1509705125.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:05.671Z,1509705125.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:06.053Z,1509705126.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:06.067Z,1509705126.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:06.416Z,1509705126.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:06.470Z,1509705126.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:06.825Z,1509705126.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:06.882Z,1509705126.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:07.230Z,1509705127.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:07.265Z,1509705127.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:07.630Z,1509705127.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:07.661Z,1509705127.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:08.020Z,1509705128.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:08.035Z,1509705128.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:08.418Z,1509705128.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:08.442Z,1509705128.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:08.832Z,1509705128.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:08.847Z,1509705128.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:09.222Z,1509705129.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:09.238Z,1509705129.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:09.639Z,1509705129.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:09.670Z,1509705129.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:10.029Z,1509705130.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:10.046Z,1509705130.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:10.181Z,1509705130.181 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:32:10.181Z,1509705130.181 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-11-03T10:32:10.181Z,1509705130.181 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:32:10.446Z,1509705130.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:10.466Z,1509705130.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:32:10.467Z,1509705130.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:10.569Z,1509705130.569 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:32:10.585Z,1509705130.585 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:32:10.673Z,1509705130.673 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:32:10.845Z,1509705130.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:10.861Z,1509705130.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:32:10.863Z,1509705130.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:11.212Z,1509705131.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:11.241Z,1509705131.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:32:11.242Z,1509705131.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:11.611Z,1509705131.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:11.642Z,1509705131.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:32:11.643Z,1509705131.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:12.016Z,1509705132.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:12.066Z,1509705132.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:32:12.067Z,1509705132.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:12.164Z,1509705132.164 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:32:12.165Z,1509705132.165 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-03T10:32:12.288Z,1509705132.288 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:32:12.289Z,1509705132.289 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:32:12.289Z,1509705132.289 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:32:12.289Z,1509705132.289 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:32:12.418Z,1509705132.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:12.443Z,1509705132.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:32:12.444Z,1509705132.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:12.837Z,1509705132.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:12.851Z,1509705132.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:32:12.853Z,1509705132.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:13.222Z,1509705133.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:13.258Z,1509705133.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:32:13.259Z,1509705133.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:13.633Z,1509705133.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:13.648Z,1509705133.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:32:13.649Z,1509705133.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:14.013Z,1509705134.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:14.047Z,1509705134.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:32:14.048Z,1509705134.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:14.415Z,1509705134.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:14.460Z,1509705134.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:32:14.461Z,1509705134.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:14.810Z,1509705134.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:14.847Z,1509705134.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:32:14.848Z,1509705134.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:15.215Z,1509705135.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:15.253Z,1509705135.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:32:15.254Z,1509705135.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:15.612Z,1509705135.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:15.627Z,1509705135.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:32:15.645Z,1509705135.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:16.025Z,1509705136.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:16.052Z,1509705136.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:32:16.053Z,1509705136.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:16.428Z,1509705136.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:16.470Z,1509705136.470 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:32:16.514Z,1509705136.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-03T10:32:16.515Z,1509705136.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:16.591Z,1509705136.591 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:32:16.592Z,1509705136.592 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:32:16.593Z,1509705136.593 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:32:16.593Z,1509705136.593 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:32:16.835Z,1509705136.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:16.864Z,1509705136.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:32:16.865Z,1509705136.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:17.215Z,1509705137.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:17.231Z,1509705137.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:17.616Z,1509705137.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:17.631Z,1509705137.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:18.027Z,1509705138.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:18.063Z,1509705138.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:18.420Z,1509705138.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:18.443Z,1509705138.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:18.825Z,1509705138.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:18.884Z,1509705138.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:19.230Z,1509705139.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:19.245Z,1509705139.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:19.629Z,1509705139.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:19.679Z,1509705139.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:20.022Z,1509705140.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:20.037Z,1509705140.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:20.423Z,1509705140.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:20.482Z,1509705140.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:20.822Z,1509705140.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:20.882Z,1509705140.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:21.226Z,1509705141.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:21.241Z,1509705141.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:21.623Z,1509705141.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:21.643Z,1509705141.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:22.028Z,1509705142.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:22.051Z,1509705142.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:22.429Z,1509705142.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:22.444Z,1509705142.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:22.829Z,1509705142.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:22.845Z,1509705142.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:23.228Z,1509705143.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:23.244Z,1509705143.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:23.621Z,1509705143.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:23.642Z,1509705143.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:24.023Z,1509705144.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:24.039Z,1509705144.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:24.425Z,1509705144.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:24.441Z,1509705144.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:24.828Z,1509705144.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:24.843Z,1509705144.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:25.229Z,1509705145.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:25.245Z,1509705145.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:25.628Z,1509705145.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:25.646Z,1509705145.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:26.020Z,1509705146.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:26.040Z,1509705146.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:26.420Z,1509705146.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:26.435Z,1509705146.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:26.827Z,1509705146.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:26.843Z,1509705146.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:27.222Z,1509705147.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:27.238Z,1509705147.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:27.626Z,1509705147.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:27.641Z,1509705147.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:28.028Z,1509705148.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:28.050Z,1509705148.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:28.429Z,1509705148.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:28.444Z,1509705148.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:28.828Z,1509705148.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:28.843Z,1509705148.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:29.223Z,1509705149.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:29.239Z,1509705149.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:29.623Z,1509705149.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:29.638Z,1509705149.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:30.023Z,1509705150.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:30.039Z,1509705150.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:30.420Z,1509705150.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:30.435Z,1509705150.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:30.842Z,1509705150.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:30.873Z,1509705150.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:31.228Z,1509705151.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:31.251Z,1509705151.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:31.628Z,1509705151.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:31.642Z,1509705151.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:32.021Z,1509705152.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:32.043Z,1509705152.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:32.426Z,1509705152.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:32.506Z,1509705152.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:32.830Z,1509705152.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:32.851Z,1509705152.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:33.224Z,1509705153.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:33.247Z,1509705153.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:33.623Z,1509705153.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:33.682Z,1509705153.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:34.036Z,1509705154.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:34.051Z,1509705154.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:34.434Z,1509705154.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:34.486Z,1509705154.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:34.833Z,1509705154.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:34.849Z,1509705154.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:35.211Z,1509705155.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:35.267Z,1509705155.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:35.616Z,1509705155.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:35.642Z,1509705155.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:36.016Z,1509705156.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:36.041Z,1509705156.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:36.412Z,1509705156.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:36.438Z,1509705156.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:36.846Z,1509705156.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:36.894Z,1509705156.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:37.233Z,1509705157.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:37.249Z,1509705157.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:37.633Z,1509705157.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:37.649Z,1509705157.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:38.013Z,1509705158.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:38.041Z,1509705158.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:38.412Z,1509705158.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:38.442Z,1509705158.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:38.815Z,1509705158.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:38.841Z,1509705158.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:39.216Z,1509705159.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:39.242Z,1509705159.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:39.608Z,1509705159.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:39.636Z,1509705159.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:40.034Z,1509705160.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:40.049Z,1509705160.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:40.438Z,1509705160.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:40.453Z,1509705160.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:40.834Z,1509705160.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:40.849Z,1509705160.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:41.216Z,1509705161.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:41.256Z,1509705161.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:41.613Z,1509705161.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:41.644Z,1509705161.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:42.013Z,1509705162.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:42.045Z,1509705162.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:42.418Z,1509705162.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:42.457Z,1509705162.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:42.843Z,1509705162.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:42.858Z,1509705162.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:43.226Z,1509705163.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:43.252Z,1509705163.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:43.626Z,1509705163.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:43.654Z,1509705163.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:44.015Z,1509705164.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:44.031Z,1509705164.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:44.413Z,1509705164.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:44.435Z,1509705164.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:44.818Z,1509705164.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:44.857Z,1509705164.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:45.218Z,1509705165.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:45.234Z,1509705165.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:45.619Z,1509705165.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:45.636Z,1509705165.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:46.029Z,1509705166.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:46.062Z,1509705166.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:46.426Z,1509705166.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:46.461Z,1509705166.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:46.853Z,1509705166.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:46.869Z,1509705166.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:47.218Z,1509705167.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:47.298Z,1509705167.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:47.620Z,1509705167.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:47.636Z,1509705167.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:48.020Z,1509705168.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:48.037Z,1509705168.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:48.424Z,1509705168.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:48.476Z,1509705168.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:48.826Z,1509705168.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:48.843Z,1509705168.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:49.234Z,1509705169.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:49.283Z,1509705169.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:49.625Z,1509705169.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:49.678Z,1509705169.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:50.024Z,1509705170.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:50.039Z,1509705170.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:50.420Z,1509705170.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:50.436Z,1509705170.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:50.867Z,1509705170.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:50.899Z,1509705170.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:51.224Z,1509705171.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:51.239Z,1509705171.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:51.623Z,1509705171.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:51.639Z,1509705171.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:52.028Z,1509705172.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:52.047Z,1509705172.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:52.429Z,1509705172.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:52.444Z,1509705172.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:52.828Z,1509705172.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:52.843Z,1509705172.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:53.233Z,1509705173.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:53.251Z,1509705173.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:53.623Z,1509705173.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:53.638Z,1509705173.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:54.020Z,1509705174.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:54.035Z,1509705174.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:54.420Z,1509705174.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:54.435Z,1509705174.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:54.829Z,1509705174.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:54.851Z,1509705174.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:55.233Z,1509705175.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:55.248Z,1509705175.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:55.628Z,1509705175.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:55.643Z,1509705175.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:56.023Z,1509705176.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:56.038Z,1509705176.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:56.425Z,1509705176.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:56.440Z,1509705176.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:56.819Z,1509705176.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:56.835Z,1509705176.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:57.222Z,1509705177.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:57.237Z,1509705177.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:57.620Z,1509705177.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:57.636Z,1509705177.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:58.028Z,1509705178.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:58.051Z,1509705178.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:58.429Z,1509705178.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:58.444Z,1509705178.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:58.828Z,1509705178.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:58.843Z,1509705178.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:59.223Z,1509705179.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:59.243Z,1509705179.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:32:59.625Z,1509705179.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:32:59.640Z,1509705179.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:00.022Z,1509705180.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:00.043Z,1509705180.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:00.420Z,1509705180.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:00.438Z,1509705180.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:00.841Z,1509705180.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:00.870Z,1509705180.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:01.229Z,1509705181.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:01.251Z,1509705181.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:04.421Z,1509705184.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:04.515Z,1509705184.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:04.645Z,1509705184.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:04.673Z,1509705184.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:05.044Z,1509705185.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:05.075Z,1509705185.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:05.444Z,1509705185.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:05.499Z,1509705185.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:05.862Z,1509705185.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:05.881Z,1509705185.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:06.267Z,1509705186.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:06.326Z,1509705186.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:06.667Z,1509705186.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:06.724Z,1509705186.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:07.045Z,1509705187.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:07.079Z,1509705187.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:07.445Z,1509705187.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:07.483Z,1509705187.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:07.842Z,1509705187.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:07.857Z,1509705187.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:08.244Z,1509705188.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:08.274Z,1509705188.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:08.645Z,1509705188.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:08.661Z,1509705188.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:09.056Z,1509705189.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:09.146Z,1509705189.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:09.458Z,1509705189.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:09.487Z,1509705189.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:09.866Z,1509705189.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:09.887Z,1509705189.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:10.240Z,1509705190.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:10.279Z,1509705190.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:10.649Z,1509705190.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:10.682Z,1509705190.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:11.045Z,1509705191.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:11.079Z,1509705191.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:11.444Z,1509705191.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:11.475Z,1509705191.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:11.864Z,1509705191.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:11.879Z,1509705191.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:12.266Z,1509705192.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:12.281Z,1509705192.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:12.689Z,1509705192.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:12.707Z,1509705192.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:13.045Z,1509705193.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:13.082Z,1509705193.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:13.447Z,1509705193.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:13.470Z,1509705193.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:13.844Z,1509705193.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:13.859Z,1509705193.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:14.245Z,1509705194.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:14.260Z,1509705194.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:14.665Z,1509705194.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:14.694Z,1509705194.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:15.058Z,1509705195.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:15.089Z,1509705195.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:15.458Z,1509705195.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:15.488Z,1509705195.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:15.858Z,1509705195.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:15.889Z,1509705195.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:16.247Z,1509705196.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:16.262Z,1509705196.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:16.684Z,1509705196.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:16.743Z,1509705196.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:17.044Z,1509705197.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:17.067Z,1509705197.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:17.448Z,1509705197.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:17.487Z,1509705197.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:17.862Z,1509705197.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:17.892Z,1509705197.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:18.262Z,1509705198.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:18.293Z,1509705198.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:18.661Z,1509705198.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:18.758Z,1509705198.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:19.046Z,1509705199.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:19.070Z,1509705199.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:19.451Z,1509705199.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:19.471Z,1509705199.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:19.854Z,1509705199.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:19.906Z,1509705199.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:20.253Z,1509705200.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:20.268Z,1509705200.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:20.651Z,1509705200.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:20.706Z,1509705200.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:21.058Z,1509705201.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:21.148Z,1509705201.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:21.462Z,1509705201.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:21.477Z,1509705201.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:21.860Z,1509705201.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:21.875Z,1509705201.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:22.256Z,1509705202.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:22.271Z,1509705202.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:22.647Z,1509705202.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:22.667Z,1509705202.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:23.053Z,1509705203.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:23.075Z,1509705203.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:23.446Z,1509705203.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:23.478Z,1509705203.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:23.877Z,1509705203.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:23.911Z,1509705203.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:24.264Z,1509705204.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:24.279Z,1509705204.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:24.670Z,1509705204.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:24.684Z,1509705204.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:25.056Z,1509705205.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:25.071Z,1509705205.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:25.455Z,1509705205.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:25.475Z,1509705205.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:25.854Z,1509705205.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:25.869Z,1509705205.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:26.254Z,1509705206.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:26.269Z,1509705206.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:26.665Z,1509705206.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:26.685Z,1509705206.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:27.066Z,1509705207.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:27.081Z,1509705207.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:27.461Z,1509705207.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:27.476Z,1509705207.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:27.864Z,1509705207.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:27.879Z,1509705207.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:28.256Z,1509705208.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:28.271Z,1509705208.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:28.672Z,1509705208.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:28.691Z,1509705208.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:29.054Z,1509705209.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:29.071Z,1509705209.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:29.456Z,1509705209.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:29.472Z,1509705209.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:29.862Z,1509705209.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:29.883Z,1509705209.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:30.265Z,1509705210.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:30.287Z,1509705210.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:30.689Z,1509705210.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:30.733Z,1509705210.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:31.049Z,1509705211.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:31.071Z,1509705211.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:31.452Z,1509705211.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:31.468Z,1509705211.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:31.856Z,1509705211.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:31.871Z,1509705211.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:32.256Z,1509705212.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:32.271Z,1509705212.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:32.652Z,1509705212.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:32.675Z,1509705212.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:33.070Z,1509705213.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:33.146Z,1509705213.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:33.146Z,1509705213.146 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 206
2017-11-03T10:33:33.146Z,1509705213.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:33:33.148Z,1509705213.148 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:33.152Z,1509705213.152 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 206
2017-11-03T10:33:33.153Z,1509705213.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:33:33.155Z,1509705213.155 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:33.155Z,1509705213.155 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 206
2017-11-03T10:33:33.155Z,1509705213.155 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:33:33.241Z,1509705213.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:33:33.241Z,1509705213.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:33:33.241Z,1509705213.241 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:33:33.453Z,1509705213.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:33.549Z,1509705213.549 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:33:33.549Z,1509705213.549 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 206
2017-11-03T10:33:33.549Z,1509705213.549 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:33:33.549Z,1509705213.549 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 206
2017-11-03T10:33:33.550Z,1509705213.550 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:33:33.550Z,1509705213.550 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 206
2017-11-03T10:33:33.867Z,1509705213.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:33.881Z,1509705213.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:33:33.882Z,1509705213.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:33:33.882Z,1509705213.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:33:33.883Z,1509705213.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:33:33.883Z,1509705213.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:33:33.883Z,1509705213.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:33:33.884Z,1509705213.884 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:33:33.884Z,1509705213.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:33:33.885Z,1509705213.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:33:34.252Z,1509705214.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:34.303Z,1509705214.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:34.648Z,1509705214.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:34.663Z,1509705214.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:35.048Z,1509705215.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:35.151Z,1509705215.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:35.455Z,1509705215.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:35.517Z,1509705215.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:35.864Z,1509705215.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:35.880Z,1509705215.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:36.264Z,1509705216.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:36.287Z,1509705216.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:36.661Z,1509705216.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:36.676Z,1509705216.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:37.054Z,1509705217.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:37.075Z,1509705217.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:37.443Z,1509705217.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:37.475Z,1509705217.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:37.844Z,1509705217.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:37.875Z,1509705217.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:38.248Z,1509705218.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:38.279Z,1509705218.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:38.661Z,1509705218.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:38.683Z,1509705218.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:39.062Z,1509705219.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:39.083Z,1509705219.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:39.469Z,1509705219.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:39.484Z,1509705219.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:39.867Z,1509705219.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:39.887Z,1509705219.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:40.247Z,1509705220.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:40.273Z,1509705220.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:40.645Z,1509705220.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:40.676Z,1509705220.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:41.045Z,1509705221.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:41.072Z,1509705221.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:41.438Z,1509705221.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:41.471Z,1509705221.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:41.866Z,1509705221.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:41.881Z,1509705221.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:42.266Z,1509705222.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:42.281Z,1509705222.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:42.667Z,1509705222.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:42.682Z,1509705222.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:43.059Z,1509705223.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:43.075Z,1509705223.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:43.445Z,1509705223.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:43.479Z,1509705223.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:43.848Z,1509705223.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:43.874Z,1509705223.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:44.244Z,1509705224.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:44.273Z,1509705224.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:44.678Z,1509705224.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:44.735Z,1509705224.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:45.071Z,1509705225.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:45.091Z,1509705225.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:45.472Z,1509705225.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:45.487Z,1509705225.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:45.864Z,1509705225.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:45.880Z,1509705225.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:46.245Z,1509705226.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:46.273Z,1509705226.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:46.643Z,1509705226.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:46.671Z,1509705226.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:47.048Z,1509705227.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:47.119Z,1509705227.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:47.445Z,1509705227.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:47.476Z,1509705227.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:47.867Z,1509705227.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:47.923Z,1509705227.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:48.270Z,1509705228.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:48.286Z,1509705228.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:48.654Z,1509705228.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:48.681Z,1509705228.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:49.040Z,1509705229.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:49.138Z,1509705229.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:49.444Z,1509705229.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:49.459Z,1509705229.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:49.844Z,1509705229.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:49.894Z,1509705229.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:50.248Z,1509705230.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:50.303Z,1509705230.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:50.644Z,1509705230.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:50.659Z,1509705230.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:51.061Z,1509705231.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:51.158Z,1509705231.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:51.461Z,1509705231.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:51.495Z,1509705231.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:51.857Z,1509705231.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:51.885Z,1509705231.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:52.244Z,1509705232.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:52.259Z,1509705232.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:52.644Z,1509705232.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:52.682Z,1509705232.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:53.044Z,1509705233.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:53.058Z,1509705233.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:53.442Z,1509705233.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:53.459Z,1509705233.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:53.862Z,1509705233.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:53.887Z,1509705233.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:54.257Z,1509705234.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:54.287Z,1509705234.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:54.666Z,1509705234.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:54.701Z,1509705234.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:55.044Z,1509705235.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:55.063Z,1509705235.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:55.450Z,1509705235.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:55.465Z,1509705235.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:55.843Z,1509705235.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:55.858Z,1509705235.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:56.244Z,1509705236.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:56.260Z,1509705236.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:56.649Z,1509705236.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:56.702Z,1509705236.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:57.058Z,1509705237.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:57.093Z,1509705237.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:57.466Z,1509705237.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:57.490Z,1509705237.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:57.857Z,1509705237.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:57.892Z,1509705237.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:58.243Z,1509705238.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:58.258Z,1509705238.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:58.686Z,1509705238.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:58.742Z,1509705238.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:59.048Z,1509705239.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:59.064Z,1509705239.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:59.448Z,1509705239.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:59.470Z,1509705239.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:33:59.854Z,1509705239.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:33:59.869Z,1509705239.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:00.261Z,1509705240.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:00.290Z,1509705240.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:00.661Z,1509705240.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:00.691Z,1509705240.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:00.694Z,1509705240.694 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T10:34:00.695Z,1509705240.695 [Default:CheckIn:C.Wait] Stopped
2017-11-03T10:34:00.695Z,1509705240.695 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T10:34:00.695Z,1509705240.695 [Default:CheckIn:D] Running Loop=1
2017-11-03T10:34:01.059Z,1509705241.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:01.091Z,1509705241.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:01.094Z,1509705241.094 [Default:CheckIn:D] Stopped
2017-11-03T10:34:01.094Z,1509705241.094 [Default:CheckIn:E] Running Loop=1
2017-11-03T10:34:01.451Z,1509705241.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:01.471Z,1509705241.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 618.892122 min 
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn:E] Stopped
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn] Stopped
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn](INFO): Running loop #61
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn] Running Loop=61
2017-11-03T10:34:01.475Z,1509705241.475 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T10:34:01.476Z,1509705241.476 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T10:34:04.659Z,1509705244.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:04.745Z,1509705244.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:04.880Z,1509705244.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:04.918Z,1509705244.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:05.312Z,1509705245.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:05.329Z,1509705245.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:05.710Z,1509705245.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:05.726Z,1509705245.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:06.110Z,1509705246.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:06.162Z,1509705246.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:06.485Z,1509705246.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:06.511Z,1509705246.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:06.880Z,1509705246.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:06.927Z,1509705246.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:07.287Z,1509705247.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:07.325Z,1509705247.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:07.686Z,1509705247.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:07.734Z,1509705247.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:08.107Z,1509705248.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:08.123Z,1509705248.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:08.512Z,1509705248.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:08.528Z,1509705248.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:08.914Z,1509705248.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:08.929Z,1509705248.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:09.285Z,1509705249.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:09.301Z,1509705249.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:09.691Z,1509705249.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:09.725Z,1509705249.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:10.084Z,1509705250.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:10.100Z,1509705250.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:10.491Z,1509705250.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:10.507Z,1509705250.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:10.907Z,1509705250.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:10.939Z,1509705250.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:11.302Z,1509705251.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:11.338Z,1509705251.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:11.705Z,1509705251.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:11.737Z,1509705251.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:12.092Z,1509705252.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:12.115Z,1509705252.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:12.491Z,1509705252.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:12.507Z,1509705252.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:12.682Z,1509705252.682 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:34:12.682Z,1509705252.682 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-11-03T10:34:12.682Z,1509705252.682 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:34:12.886Z,1509705252.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:12.910Z,1509705252.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:34:12.911Z,1509705252.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:13.024Z,1509705253.024 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:34:13.085Z,1509705253.085 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:34:13.168Z,1509705253.168 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:34:13.293Z,1509705253.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:13.310Z,1509705253.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:34:13.311Z,1509705253.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:13.691Z,1509705253.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:13.710Z,1509705253.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:34:13.711Z,1509705253.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:14.101Z,1509705254.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:14.116Z,1509705254.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:34:14.117Z,1509705254.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:14.500Z,1509705254.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:14.515Z,1509705254.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:34:14.516Z,1509705254.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:14.624Z,1509705254.624 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:34:14.624Z,1509705254.624 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-03T10:34:14.785Z,1509705254.785 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:34:14.786Z,1509705254.786 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:34:14.786Z,1509705254.786 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:34:14.786Z,1509705254.786 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:34:14.898Z,1509705254.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:14.918Z,1509705254.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:34:14.919Z,1509705254.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:15.296Z,1509705255.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:15.310Z,1509705255.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:34:15.311Z,1509705255.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:15.695Z,1509705255.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:15.714Z,1509705255.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:34:15.715Z,1509705255.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:16.093Z,1509705256.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:16.108Z,1509705256.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:34:16.109Z,1509705256.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:16.496Z,1509705256.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:16.510Z,1509705256.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:34:16.511Z,1509705256.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:16.900Z,1509705256.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:16.915Z,1509705256.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:34:16.916Z,1509705256.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:17.301Z,1509705257.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:17.315Z,1509705257.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:34:17.317Z,1509705257.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:17.701Z,1509705257.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:17.716Z,1509705257.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:34:17.718Z,1509705257.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:18.090Z,1509705258.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:18.109Z,1509705258.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:34:18.110Z,1509705258.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:18.492Z,1509705258.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:18.507Z,1509705258.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:34:18.508Z,1509705258.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:18.896Z,1509705258.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:18.941Z,1509705258.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:34:18.942Z,1509705258.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:19.039Z,1509705259.039 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:34:19.103Z,1509705259.103 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:34:19.104Z,1509705259.104 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:34:19.105Z,1509705259.105 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:34:19.106Z,1509705259.106 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:34:19.303Z,1509705259.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:19.322Z,1509705259.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:34:19.323Z,1509705259.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:19.694Z,1509705259.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:19.767Z,1509705259.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:20.104Z,1509705260.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:20.120Z,1509705260.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:20.504Z,1509705260.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:20.555Z,1509705260.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:20.906Z,1509705260.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:20.923Z,1509705260.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:21.287Z,1509705261.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:21.339Z,1509705261.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:21.680Z,1509705261.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:21.751Z,1509705261.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:22.085Z,1509705262.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:22.111Z,1509705262.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:22.480Z,1509705262.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:22.511Z,1509705262.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:22.909Z,1509705262.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:22.925Z,1509705262.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:23.308Z,1509705263.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:23.330Z,1509705263.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:23.710Z,1509705263.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:23.726Z,1509705263.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:24.084Z,1509705264.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:24.110Z,1509705264.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:24.480Z,1509705264.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:24.509Z,1509705264.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:24.884Z,1509705264.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:24.911Z,1509705264.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:25.286Z,1509705265.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:25.312Z,1509705265.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:25.692Z,1509705265.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:25.729Z,1509705265.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:26.122Z,1509705266.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:26.139Z,1509705266.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:26.493Z,1509705266.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:26.523Z,1509705266.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:26.909Z,1509705266.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:26.925Z,1509705266.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:27.285Z,1509705267.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:27.320Z,1509705267.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:27.687Z,1509705267.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:27.718Z,1509705267.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:28.085Z,1509705268.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:28.119Z,1509705268.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:28.487Z,1509705268.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:28.519Z,1509705268.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:28.916Z,1509705268.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:28.939Z,1509705268.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:29.309Z,1509705269.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:29.324Z,1509705269.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:29.708Z,1509705269.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:29.723Z,1509705269.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:30.087Z,1509705270.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:30.111Z,1509705270.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:30.484Z,1509705270.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:30.500Z,1509705270.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:30.890Z,1509705270.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:30.916Z,1509705270.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:31.293Z,1509705271.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:31.308Z,1509705271.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:31.692Z,1509705271.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:31.714Z,1509705271.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:32.102Z,1509705272.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:32.118Z,1509705272.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:32.502Z,1509705272.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:32.518Z,1509705272.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:32.906Z,1509705272.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:32.921Z,1509705272.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:33.296Z,1509705273.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:33.311Z,1509705273.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:33.680Z,1509705273.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:33.770Z,1509705273.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:34.084Z,1509705274.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:34.111Z,1509705274.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:34.484Z,1509705274.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:34.500Z,1509705274.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:34.902Z,1509705274.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:34.967Z,1509705274.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:35.297Z,1509705275.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:35.324Z,1509705275.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:35.698Z,1509705275.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:35.764Z,1509705275.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:36.081Z,1509705276.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:36.134Z,1509705276.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:36.484Z,1509705276.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:36.499Z,1509705276.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:36.892Z,1509705276.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:36.927Z,1509705276.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:37.284Z,1509705277.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:37.300Z,1509705277.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:37.683Z,1509705277.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:37.698Z,1509705277.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:38.098Z,1509705278.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:38.129Z,1509705278.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:38.498Z,1509705278.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:38.533Z,1509705278.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:38.904Z,1509705278.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:38.938Z,1509705278.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:39.289Z,1509705279.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:39.304Z,1509705279.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:39.684Z,1509705279.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:39.699Z,1509705279.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:40.086Z,1509705280.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:40.101Z,1509705280.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:40.491Z,1509705280.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:40.507Z,1509705280.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:40.898Z,1509705280.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:40.929Z,1509705280.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:41.293Z,1509705281.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:41.314Z,1509705281.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:41.702Z,1509705281.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:41.733Z,1509705281.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:42.089Z,1509705282.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:42.104Z,1509705282.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:42.489Z,1509705282.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:42.505Z,1509705282.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:42.889Z,1509705282.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:42.904Z,1509705282.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:43.294Z,1509705283.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:43.309Z,1509705283.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:43.690Z,1509705283.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:43.705Z,1509705283.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:44.102Z,1509705284.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:44.133Z,1509705284.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:44.498Z,1509705284.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:44.513Z,1509705284.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:44.906Z,1509705284.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:44.923Z,1509705284.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:45.286Z,1509705285.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:45.314Z,1509705285.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:45.686Z,1509705285.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:45.713Z,1509705285.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:46.083Z,1509705286.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:46.115Z,1509705286.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:46.486Z,1509705286.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:46.514Z,1509705286.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:46.907Z,1509705286.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:46.932Z,1509705286.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:47.307Z,1509705287.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:47.327Z,1509705287.327 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:34:47.327Z,1509705287.327 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:34:47.327Z,1509705287.327 [BPC1](ERROR): Data Fault
2017-11-03T10:34:47.335Z,1509705287.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:47.440Z,1509705287.440 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:34:47.707Z,1509705287.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:47.734Z,1509705287.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:48.088Z,1509705288.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:48.105Z,1509705288.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:48.491Z,1509705288.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:48.507Z,1509705288.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:48.611Z,1509705288.611 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:34:48.611Z,1509705288.611 [BPC1] No Fault, FailCount= 1
2017-11-03T10:34:48.892Z,1509705288.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:48.963Z,1509705288.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:49.294Z,1509705289.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:49.350Z,1509705289.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:49.693Z,1509705289.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:49.708Z,1509705289.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:50.102Z,1509705290.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:50.117Z,1509705290.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:50.500Z,1509705290.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:50.515Z,1509705290.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:50.898Z,1509705290.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:50.919Z,1509705290.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:51.295Z,1509705291.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:51.311Z,1509705291.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:51.692Z,1509705291.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:51.708Z,1509705291.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:52.093Z,1509705292.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:52.107Z,1509705292.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:52.495Z,1509705292.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:52.510Z,1509705292.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:52.927Z,1509705292.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:52.955Z,1509705292.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:53.299Z,1509705293.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:53.324Z,1509705293.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:53.701Z,1509705293.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:53.723Z,1509705293.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:54.094Z,1509705294.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:54.110Z,1509705294.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:54.492Z,1509705294.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:54.507Z,1509705294.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:54.896Z,1509705294.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:54.911Z,1509705294.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:55.291Z,1509705295.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:55.306Z,1509705295.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:55.692Z,1509705295.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:55.707Z,1509705295.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:56.101Z,1509705296.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:56.117Z,1509705296.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:56.500Z,1509705296.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:56.515Z,1509705296.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:56.900Z,1509705296.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:56.923Z,1509705296.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:57.303Z,1509705297.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:57.323Z,1509705297.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:57.693Z,1509705297.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:57.708Z,1509705297.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:58.093Z,1509705298.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:58.108Z,1509705298.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:58.497Z,1509705298.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:58.512Z,1509705298.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:58.918Z,1509705298.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:58.933Z,1509705298.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:59.306Z,1509705299.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:59.321Z,1509705299.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:34:59.706Z,1509705299.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:34:59.723Z,1509705299.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:00.084Z,1509705300.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:00.116Z,1509705300.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:00.484Z,1509705300.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:00.499Z,1509705300.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:00.887Z,1509705300.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:00.910Z,1509705300.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:01.294Z,1509705301.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:01.351Z,1509705301.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:01.695Z,1509705301.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:01.752Z,1509705301.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:04.995Z,1509705304.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:05.011Z,1509705305.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:05.161Z,1509705305.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:05.199Z,1509705305.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:05.560Z,1509705305.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:05.611Z,1509705305.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:05.954Z,1509705305.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:05.969Z,1509705305.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:06.351Z,1509705306.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:06.410Z,1509705306.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:06.762Z,1509705306.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:06.869Z,1509705306.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:07.162Z,1509705307.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:07.182Z,1509705307.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:07.562Z,1509705307.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:07.577Z,1509705307.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:07.951Z,1509705307.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:07.965Z,1509705307.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:08.353Z,1509705308.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:08.368Z,1509705308.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:08.762Z,1509705308.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:08.782Z,1509705308.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:09.211Z,1509705309.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:09.226Z,1509705309.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:09.559Z,1509705309.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:09.602Z,1509705309.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:09.951Z,1509705309.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:09.967Z,1509705309.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:10.349Z,1509705310.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:10.375Z,1509705310.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:10.755Z,1509705310.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:10.777Z,1509705310.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:11.207Z,1509705311.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:11.225Z,1509705311.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:11.562Z,1509705311.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:11.601Z,1509705311.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:11.955Z,1509705311.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:11.975Z,1509705311.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:12.350Z,1509705312.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:12.371Z,1509705312.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:12.766Z,1509705312.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:12.781Z,1509705312.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:13.163Z,1509705313.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:13.205Z,1509705313.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:13.561Z,1509705313.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:13.583Z,1509705313.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:13.949Z,1509705313.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:13.965Z,1509705313.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:14.351Z,1509705314.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:14.366Z,1509705314.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:14.761Z,1509705314.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:14.788Z,1509705314.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:15.161Z,1509705315.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:15.182Z,1509705315.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:15.561Z,1509705315.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:15.577Z,1509705315.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:15.950Z,1509705315.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:15.965Z,1509705315.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:16.350Z,1509705316.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:16.371Z,1509705316.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:16.767Z,1509705316.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:16.786Z,1509705316.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:17.161Z,1509705317.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:17.206Z,1509705317.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:17.561Z,1509705317.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:17.576Z,1509705317.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:17.950Z,1509705317.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:17.965Z,1509705317.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:18.349Z,1509705318.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:18.375Z,1509705318.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:18.758Z,1509705318.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:18.842Z,1509705318.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:19.165Z,1509705319.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:19.180Z,1509705319.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:19.561Z,1509705319.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:19.587Z,1509705319.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:19.941Z,1509705319.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:20.010Z,1509705320.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:20.336Z,1509705320.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:20.371Z,1509705320.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:20.761Z,1509705320.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:20.865Z,1509705320.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:21.153Z,1509705321.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:21.185Z,1509705321.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:21.553Z,1509705321.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:21.617Z,1509705321.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:21.941Z,1509705321.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:21.957Z,1509705321.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:22.347Z,1509705322.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:22.383Z,1509705322.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:22.761Z,1509705322.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:22.792Z,1509705322.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:23.189Z,1509705323.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:23.217Z,1509705323.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:23.553Z,1509705323.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:23.591Z,1509705323.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:23.949Z,1509705323.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:23.964Z,1509705323.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:24.346Z,1509705324.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:24.362Z,1509705324.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:24.749Z,1509705324.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:24.765Z,1509705324.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:25.197Z,1509705325.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:25.220Z,1509705325.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:25.554Z,1509705325.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:25.595Z,1509705325.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:25.948Z,1509705325.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:25.966Z,1509705325.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:26.346Z,1509705326.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:26.361Z,1509705326.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:26.765Z,1509705326.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:26.790Z,1509705326.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:27.161Z,1509705327.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:27.195Z,1509705327.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:27.561Z,1509705327.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:27.592Z,1509705327.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:27.949Z,1509705327.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:27.964Z,1509705327.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:28.348Z,1509705328.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:28.363Z,1509705328.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:28.754Z,1509705328.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:28.769Z,1509705328.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:29.160Z,1509705329.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:29.196Z,1509705329.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:29.561Z,1509705329.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:29.594Z,1509705329.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:29.949Z,1509705329.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:29.963Z,1509705329.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:30.347Z,1509705330.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:30.363Z,1509705330.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:30.753Z,1509705330.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:30.769Z,1509705330.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:31.161Z,1509705331.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:31.195Z,1509705331.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:31.554Z,1509705331.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:31.569Z,1509705331.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:31.948Z,1509705331.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:31.963Z,1509705331.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:32.347Z,1509705332.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:32.362Z,1509705332.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:32.772Z,1509705332.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:32.797Z,1509705332.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:33.153Z,1509705333.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:33.254Z,1509705333.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:33.557Z,1509705333.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:33.573Z,1509705333.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:33.949Z,1509705333.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:34.002Z,1509705334.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:34.348Z,1509705334.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:34.369Z,1509705334.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:34.754Z,1509705334.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:34.863Z,1509705334.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:35.156Z,1509705335.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:35.179Z,1509705335.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:35.556Z,1509705335.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:35.610Z,1509705335.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:35.952Z,1509705335.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:35.970Z,1509705335.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:36.348Z,1509705336.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:36.363Z,1509705336.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:36.755Z,1509705336.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:36.774Z,1509705336.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:37.196Z,1509705337.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:37.215Z,1509705337.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:37.556Z,1509705337.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:37.597Z,1509705337.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:37.952Z,1509705337.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:37.971Z,1509705337.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:38.349Z,1509705338.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:38.365Z,1509705338.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:38.756Z,1509705338.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:38.772Z,1509705338.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:39.191Z,1509705339.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:39.209Z,1509705339.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:39.556Z,1509705339.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:39.599Z,1509705339.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:39.950Z,1509705339.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:39.965Z,1509705339.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:40.348Z,1509705340.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:40.363Z,1509705340.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:40.755Z,1509705340.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:40.778Z,1509705340.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:41.155Z,1509705341.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:41.175Z,1509705341.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:41.555Z,1509705341.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:41.575Z,1509705341.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:41.950Z,1509705341.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:41.966Z,1509705341.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:42.349Z,1509705342.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:42.364Z,1509705342.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:42.756Z,1509705342.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:42.779Z,1509705342.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:43.157Z,1509705343.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:43.173Z,1509705343.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:43.558Z,1509705343.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:43.573Z,1509705343.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:43.950Z,1509705343.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:43.966Z,1509705343.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:44.352Z,1509705344.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:44.366Z,1509705344.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:44.756Z,1509705344.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:44.772Z,1509705344.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:45.156Z,1509705345.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:45.172Z,1509705345.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:45.558Z,1509705345.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:45.578Z,1509705345.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:45.970Z,1509705345.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:46.005Z,1509705346.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:46.350Z,1509705346.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:46.365Z,1509705346.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:46.762Z,1509705346.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:46.780Z,1509705346.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:47.158Z,1509705347.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:47.225Z,1509705347.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:47.558Z,1509705347.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:47.622Z,1509705347.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:47.953Z,1509705347.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:47.967Z,1509705347.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:48.353Z,1509705348.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:48.406Z,1509705348.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:48.762Z,1509705348.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:48.782Z,1509705348.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:49.157Z,1509705349.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:49.211Z,1509705349.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:49.554Z,1509705349.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:49.611Z,1509705349.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:49.947Z,1509705349.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:49.985Z,1509705349.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:50.341Z,1509705350.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:50.357Z,1509705350.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:50.758Z,1509705350.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:50.783Z,1509705350.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:51.194Z,1509705351.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:51.214Z,1509705351.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:51.561Z,1509705351.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:51.601Z,1509705351.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:51.945Z,1509705351.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:51.960Z,1509705351.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:52.344Z,1509705352.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:52.360Z,1509705352.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:52.761Z,1509705352.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:52.798Z,1509705352.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:53.199Z,1509705353.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:53.223Z,1509705353.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:53.554Z,1509705353.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:53.594Z,1509705353.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:53.949Z,1509705353.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:53.965Z,1509705353.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:54.344Z,1509705354.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:54.360Z,1509705354.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:54.749Z,1509705354.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:54.765Z,1509705354.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:55.161Z,1509705355.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:55.194Z,1509705355.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:55.561Z,1509705355.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:55.593Z,1509705355.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:55.949Z,1509705355.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:55.964Z,1509705355.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:56.350Z,1509705356.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:56.365Z,1509705356.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:56.754Z,1509705356.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:56.778Z,1509705356.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:57.155Z,1509705357.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:57.179Z,1509705357.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:57.564Z,1509705357.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:57.579Z,1509705357.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:57.941Z,1509705357.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:57.984Z,1509705357.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:58.341Z,1509705358.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:58.389Z,1509705358.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:58.765Z,1509705358.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:58.784Z,1509705358.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:59.155Z,1509705359.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:59.192Z,1509705359.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:59.552Z,1509705359.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:59.593Z,1509705359.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:35:59.950Z,1509705359.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:35:59.987Z,1509705359.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:00.341Z,1509705360.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:00.384Z,1509705360.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:00.769Z,1509705360.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:00.822Z,1509705360.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:01.190Z,1509705361.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:01.205Z,1509705361.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:01.550Z,1509705361.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:01.650Z,1509705361.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:01.952Z,1509705361.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:01.999Z,1509705361.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:07.408Z,1509705367.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:07.466Z,1509705367.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:07.602Z,1509705367.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:07.623Z,1509705367.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:08.005Z,1509705368.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:08.055Z,1509705368.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:08.412Z,1509705368.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:08.458Z,1509705368.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:08.794Z,1509705368.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:08.810Z,1509705368.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:09.192Z,1509705369.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:09.208Z,1509705369.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:09.593Z,1509705369.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:09.609Z,1509705369.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:10.005Z,1509705370.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:10.020Z,1509705370.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:10.407Z,1509705370.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:10.427Z,1509705370.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:10.802Z,1509705370.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:10.819Z,1509705370.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:11.189Z,1509705371.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:11.205Z,1509705371.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:11.588Z,1509705371.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:11.623Z,1509705371.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:11.987Z,1509705371.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:12.006Z,1509705372.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:12.394Z,1509705372.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:12.409Z,1509705372.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:12.850Z,1509705372.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:12.871Z,1509705372.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:13.204Z,1509705373.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:13.219Z,1509705373.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:13.600Z,1509705373.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:13.623Z,1509705373.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:13.992Z,1509705373.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:14.023Z,1509705374.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:14.392Z,1509705374.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:14.416Z,1509705374.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:14.815Z,1509705374.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:14.863Z,1509705374.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:14.999Z,1509705374.999 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:36:14.999Z,1509705374.999 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-11-03T10:36:14.000Z,1509705375.000 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:36:15.205Z,1509705375.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:15.258Z,1509705375.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:36:15.259Z,1509705375.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:15.361Z,1509705375.361 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:36:15.405Z,1509705375.405 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:36:15.633Z,1509705375.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:15.687Z,1509705375.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:36:15.688Z,1509705375.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:15.726Z,1509705375.726 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:36:15.990Z,1509705375.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:16.019Z,1509705376.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:36:16.020Z,1509705376.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:16.388Z,1509705376.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:16.442Z,1509705376.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:36:16.443Z,1509705376.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:16.791Z,1509705376.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:16.835Z,1509705376.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:36:16.836Z,1509705376.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:16.941Z,1509705376.941 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:36:16.941Z,1509705376.941 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-03T10:36:17.191Z,1509705377.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:17.211Z,1509705377.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T10:36:17.212Z,1509705377.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:17.341Z,1509705377.341 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:36:17.341Z,1509705377.341 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:36:17.341Z,1509705377.341 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:36:17.341Z,1509705377.341 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:36:17.590Z,1509705377.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:17.621Z,1509705377.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:36:17.622Z,1509705377.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:18.006Z,1509705378.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:18.045Z,1509705378.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:36:18.047Z,1509705378.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:18.414Z,1509705378.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:18.453Z,1509705378.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:36:18.454Z,1509705378.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:18.800Z,1509705378.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:18.838Z,1509705378.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:36:18.839Z,1509705378.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:19.190Z,1509705379.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:19.246Z,1509705379.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:36:19.247Z,1509705379.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:19.589Z,1509705379.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:19.627Z,1509705379.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:36:19.633Z,1509705379.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:19.991Z,1509705379.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:20.029Z,1509705380.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:36:20.031Z,1509705380.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:20.393Z,1509705380.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:20.477Z,1509705380.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:36:20.478Z,1509705380.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:20.803Z,1509705380.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:20.832Z,1509705380.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:36:20.837Z,1509705380.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:21.206Z,1509705381.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:21.274Z,1509705381.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:36:21.275Z,1509705381.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:21.552Z,1509705381.552 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:36:21.652Z,1509705381.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:21.733Z,1509705381.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-03T10:36:21.734Z,1509705381.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:21.740Z,1509705381.740 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:36:21.741Z,1509705381.741 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:36:21.742Z,1509705381.742 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:36:21.743Z,1509705381.743 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:36:21.992Z,1509705381.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:22.085Z,1509705382.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:36:22.086Z,1509705382.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:22.405Z,1509705382.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:22.483Z,1509705382.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:22.829Z,1509705382.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:22.854Z,1509705382.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:23.208Z,1509705383.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:23.249Z,1509705383.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:23.605Z,1509705383.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:23.646Z,1509705383.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:24.051Z,1509705384.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:24.087Z,1509705384.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:24.416Z,1509705384.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:24.465Z,1509705384.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:24.815Z,1509705384.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:24.833Z,1509705384.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:25.187Z,1509705385.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:25.213Z,1509705385.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:25.589Z,1509705385.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:25.614Z,1509705385.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:25.989Z,1509705385.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:26.020Z,1509705386.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:26.391Z,1509705386.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:26.427Z,1509705386.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:26.807Z,1509705386.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:26.827Z,1509705386.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:27.209Z,1509705387.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:27.225Z,1509705387.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:27.618Z,1509705387.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:27.634Z,1509705387.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:28.003Z,1509705388.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:28.019Z,1509705388.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:28.407Z,1509705388.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:28.423Z,1509705388.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:28.836Z,1509705388.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:28.929Z,1509705388.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:29.190Z,1509705389.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:29.223Z,1509705389.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:29.592Z,1509705389.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:29.620Z,1509705389.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:30.008Z,1509705390.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:30.023Z,1509705390.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:30.415Z,1509705390.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:30.430Z,1509705390.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:30.813Z,1509705390.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:30.834Z,1509705390.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:31.193Z,1509705391.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:31.233Z,1509705391.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:31.623Z,1509705391.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:31.647Z,1509705391.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:31.993Z,1509705391.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:32.025Z,1509705392.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:32.388Z,1509705392.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:32.435Z,1509705392.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:32.808Z,1509705392.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:32.825Z,1509705392.825 [PNI_TCM](ERROR): CRC does not match. Expected:0x57422 got:0x18968
2017-11-03T10:36:32.854Z,1509705392.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:33.202Z,1509705393.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:33.227Z,1509705393.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:33.635Z,1509705393.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:33.644Z,1509705393.644 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:36:33.644Z,1509705393.644 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:36:33.644Z,1509705393.644 [BPC1](ERROR): Data Fault
2017-11-03T10:36:33.657Z,1509705393.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:33.777Z,1509705393.777 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:36:33.996Z,1509705393.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:34.032Z,1509705394.032 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:34.032Z,1509705394.032 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 207
2017-11-03T10:36:34.032Z,1509705394.032 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:36:34.038Z,1509705394.038 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:34.038Z,1509705394.038 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 207
2017-11-03T10:36:34.038Z,1509705394.038 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:36:34.040Z,1509705394.040 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:34.045Z,1509705394.045 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 207
2017-11-03T10:36:34.045Z,1509705394.045 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:36:34.137Z,1509705394.137 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:36:34.137Z,1509705394.137 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:36:34.137Z,1509705394.137 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:36:34.396Z,1509705394.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:34.489Z,1509705394.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:36:34.489Z,1509705394.489 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 207
2017-11-03T10:36:34.489Z,1509705394.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:36:34.489Z,1509705394.489 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 207
2017-11-03T10:36:34.490Z,1509705394.490 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:36:34.490Z,1509705394.490 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 207
2017-11-03T10:36:34.804Z,1509705394.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:34.822Z,1509705394.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:36:34.822Z,1509705394.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:36:34.823Z,1509705394.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:36:34.823Z,1509705394.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:36:34.823Z,1509705394.823 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:36:34.824Z,1509705394.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:36:34.824Z,1509705394.824 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:36:34.824Z,1509705394.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:36:34.825Z,1509705394.825 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:36:34.972Z,1509705394.972 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:36:34.972Z,1509705394.972 [BPC1] No Fault, FailCount= 1
2017-11-03T10:36:35.190Z,1509705395.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:35.279Z,1509705395.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:35.618Z,1509705395.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:35.665Z,1509705395.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:36.007Z,1509705396.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:36.063Z,1509705396.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:36.402Z,1509705396.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:36.432Z,1509705396.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:36.806Z,1509705396.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:36.830Z,1509705396.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:37.191Z,1509705397.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:37.234Z,1509705397.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:37.638Z,1509705397.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:37.649Z,1509705397.649 [PNI_TCM](ERROR): CRC does not match. Expected:0x60095 got:0x12060
2017-11-03T10:36:37.687Z,1509705397.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:37.995Z,1509705397.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:38.011Z,1509705398.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:38.395Z,1509705398.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:38.435Z,1509705398.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:38.805Z,1509705398.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:38.833Z,1509705398.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:39.207Z,1509705399.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:39.231Z,1509705399.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:39.631Z,1509705399.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:39.691Z,1509705399.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:39.992Z,1509705399.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:40.007Z,1509705400.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:40.396Z,1509705400.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:40.431Z,1509705400.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:40.799Z,1509705400.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:40.837Z,1509705400.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:41.191Z,1509705401.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:41.211Z,1509705401.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:41.594Z,1509705401.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:41.615Z,1509705401.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:42.012Z,1509705402.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:42.042Z,1509705402.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:42.399Z,1509705402.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:42.434Z,1509705402.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:42.805Z,1509705402.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:42.837Z,1509705402.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:43.194Z,1509705403.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:43.214Z,1509705403.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:43.592Z,1509705403.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:43.634Z,1509705403.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:43.995Z,1509705403.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:44.002Z,1509705404.002 [PNI_TCM](ERROR): CRC does not match. Expected:0x44456 got:0x7361
2017-11-03T10:36:44.042Z,1509705404.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:44.392Z,1509705404.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:44.430Z,1509705404.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:44.810Z,1509705404.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:44.839Z,1509705404.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:45.204Z,1509705405.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:45.220Z,1509705405.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:45.604Z,1509705405.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:45.638Z,1509705405.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:46.002Z,1509705406.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:46.017Z,1509705406.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:46.411Z,1509705406.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:46.440Z,1509705406.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:46.805Z,1509705406.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:46.836Z,1509705406.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:47.210Z,1509705407.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:47.239Z,1509705407.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:47.628Z,1509705407.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:47.665Z,1509705407.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:47.997Z,1509705407.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:48.078Z,1509705408.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:48.392Z,1509705408.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:48.438Z,1509705408.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:48.797Z,1509705408.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:48.803Z,1509705408.803 [PNI_TCM](ERROR): CRC does not match. Expected:0x54493 got:0x7361
2017-11-03T10:36:48.833Z,1509705408.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:49.202Z,1509705409.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:49.243Z,1509705409.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:49.634Z,1509705409.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:49.671Z,1509705409.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:50.011Z,1509705410.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:50.066Z,1509705410.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:50.410Z,1509705410.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:50.459Z,1509705410.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:50.813Z,1509705410.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:50.843Z,1509705410.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:51.197Z,1509705411.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:51.212Z,1509705411.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:51.639Z,1509705411.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:51.711Z,1509705411.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:51.995Z,1509705411.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:52.011Z,1509705412.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:52.396Z,1509705412.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:52.424Z,1509705412.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:52.805Z,1509705412.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:52.820Z,1509705412.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:53.202Z,1509705413.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:53.218Z,1509705413.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:53.639Z,1509705413.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:53.709Z,1509705413.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:54.000Z,1509705414.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:54.016Z,1509705414.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:54.399Z,1509705414.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:54.419Z,1509705414.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:54.805Z,1509705414.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:54.820Z,1509705414.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:55.204Z,1509705415.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:55.226Z,1509705415.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:55.603Z,1509705415.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:55.619Z,1509705415.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:55.998Z,1509705415.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:56.013Z,1509705416.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:56.399Z,1509705416.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:56.416Z,1509705416.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:56.804Z,1509705416.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:56.845Z,1509705416.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:57.202Z,1509705417.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:57.218Z,1509705417.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:57.606Z,1509705417.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:57.621Z,1509705417.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:57.000Z,1509705418.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:58.017Z,1509705418.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:58.408Z,1509705418.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:58.423Z,1509705418.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:58.801Z,1509705418.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:58.816Z,1509705418.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:59.199Z,1509705419.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:59.219Z,1509705419.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:36:59.597Z,1509705419.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:36:59.623Z,1509705419.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:00.007Z,1509705420.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:00.027Z,1509705420.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:00.417Z,1509705420.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:00.446Z,1509705420.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:00.805Z,1509705420.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:00.821Z,1509705420.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:01.202Z,1509705421.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:01.218Z,1509705421.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:01.619Z,1509705421.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:01.655Z,1509705421.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:02.004Z,1509705422.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:02.020Z,1509705422.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:05.201Z,1509705425.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:05.287Z,1509705425.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:05.418Z,1509705425.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:05.451Z,1509705425.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:05.829Z,1509705425.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:05.893Z,1509705425.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:06.221Z,1509705426.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:06.254Z,1509705426.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:06.604Z,1509705426.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:06.659Z,1509705426.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:07.012Z,1509705427.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:07.059Z,1509705427.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:07.407Z,1509705427.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:07.425Z,1509705427.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:07.826Z,1509705427.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:07.850Z,1509705427.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:08.221Z,1509705428.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:08.253Z,1509705428.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:08.621Z,1509705428.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:08.654Z,1509705428.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:09.004Z,1509705429.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:09.019Z,1509705429.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:09.411Z,1509705429.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:09.431Z,1509705429.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:09.832Z,1509705429.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:09.880Z,1509705429.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:10.204Z,1509705430.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:10.219Z,1509705430.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:10.608Z,1509705430.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:10.623Z,1509705430.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:11.021Z,1509705431.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:11.053Z,1509705431.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:11.425Z,1509705431.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:11.450Z,1509705431.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:11.821Z,1509705431.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:11.853Z,1509705431.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:12.217Z,1509705432.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:12.232Z,1509705432.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:12.611Z,1509705432.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:12.631Z,1509705432.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:13.008Z,1509705433.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:13.023Z,1509705433.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:13.409Z,1509705433.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:13.424Z,1509705433.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:13.821Z,1509705433.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:13.853Z,1509705433.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:14.229Z,1509705434.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:14.259Z,1509705434.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:14.622Z,1509705434.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:14.653Z,1509705434.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:15.011Z,1509705435.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:15.031Z,1509705435.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:15.408Z,1509705435.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:15.431Z,1509705435.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:15.815Z,1509705435.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:15.831Z,1509705435.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:16.209Z,1509705436.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:16.224Z,1509705436.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:16.608Z,1509705436.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:16.631Z,1509705436.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:17.022Z,1509705437.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:17.052Z,1509705437.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:17.417Z,1509705437.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:17.454Z,1509705437.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:17.825Z,1509705437.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:17.850Z,1509705437.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:18.208Z,1509705438.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:18.227Z,1509705438.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:18.611Z,1509705438.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:18.631Z,1509705438.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:19.008Z,1509705439.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:19.079Z,1509705439.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:19.412Z,1509705439.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:19.435Z,1509705439.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:19.825Z,1509705439.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:19.875Z,1509705439.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:20.221Z,1509705440.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:20.236Z,1509705440.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:20.621Z,1509705440.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:20.675Z,1509705440.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:21.012Z,1509705441.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:21.063Z,1509705441.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:21.408Z,1509705441.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:21.423Z,1509705441.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:21.812Z,1509705441.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:21.828Z,1509705441.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:22.208Z,1509705442.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:22.224Z,1509705442.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:22.607Z,1509705442.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:22.623Z,1509705442.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:23.021Z,1509705443.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:23.053Z,1509705443.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:23.425Z,1509705443.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:23.458Z,1509705443.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:23.851Z,1509705443.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:23.890Z,1509705443.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:24.208Z,1509705444.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:24.231Z,1509705444.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:24.600Z,1509705444.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:24.615Z,1509705444.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:25.008Z,1509705445.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:25.023Z,1509705445.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:25.404Z,1509705445.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:25.419Z,1509705445.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:25.821Z,1509705445.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:25.846Z,1509705445.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:26.225Z,1509705446.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:26.251Z,1509705446.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:26.622Z,1509705446.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:26.646Z,1509705446.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:27.004Z,1509705447.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:27.020Z,1509705447.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:27.408Z,1509705447.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:27.427Z,1509705447.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:27.805Z,1509705447.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:27.827Z,1509705447.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:28.224Z,1509705448.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:28.248Z,1509705448.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:28.611Z,1509705448.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:28.647Z,1509705448.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:29.022Z,1509705449.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:29.053Z,1509705449.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:29.422Z,1509705449.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:29.451Z,1509705449.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:29.826Z,1509705449.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:29.850Z,1509705449.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:30.208Z,1509705450.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:30.225Z,1509705450.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:30.611Z,1509705450.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:30.627Z,1509705450.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:31.011Z,1509705451.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:31.031Z,1509705451.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:31.410Z,1509705451.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:31.425Z,1509705451.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:31.825Z,1509705451.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:31.857Z,1509705451.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:32.221Z,1509705452.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:32.246Z,1509705452.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:32.622Z,1509705452.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:32.657Z,1509705452.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:33.013Z,1509705453.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:33.091Z,1509705453.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:33.412Z,1509705453.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:33.427Z,1509705453.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:33.822Z,1509705453.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:33.878Z,1509705453.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:34.216Z,1509705454.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:34.232Z,1509705454.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:34.612Z,1509705454.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:34.666Z,1509705454.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:35.022Z,1509705455.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:35.071Z,1509705455.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:35.422Z,1509705455.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:35.443Z,1509705455.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:35.835Z,1509705455.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:35.866Z,1509705455.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:36.213Z,1509705456.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:36.228Z,1509705456.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:36.609Z,1509705456.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:36.630Z,1509705456.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:37.013Z,1509705457.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:37.028Z,1509705457.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:37.415Z,1509705457.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:37.430Z,1509705457.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:37.852Z,1509705457.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:37.897Z,1509705457.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:38.221Z,1509705458.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:38.251Z,1509705458.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:38.617Z,1509705458.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:38.649Z,1509705458.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:39.011Z,1509705459.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:39.047Z,1509705459.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:39.407Z,1509705459.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:39.423Z,1509705459.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:39.803Z,1509705459.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:39.818Z,1509705459.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:40.212Z,1509705460.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:40.231Z,1509705460.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:40.608Z,1509705460.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:40.623Z,1509705460.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:41.021Z,1509705461.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:41.052Z,1509705461.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:41.421Z,1509705461.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:41.449Z,1509705461.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:41.821Z,1509705461.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:41.849Z,1509705461.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:42.215Z,1509705462.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:42.231Z,1509705462.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:42.608Z,1509705462.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:42.624Z,1509705462.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:43.009Z,1509705463.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:43.024Z,1509705463.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:43.409Z,1509705463.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:43.424Z,1509705463.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:43.821Z,1509705463.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:43.851Z,1509705463.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:44.225Z,1509705464.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:44.249Z,1509705464.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:44.621Z,1509705464.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:44.653Z,1509705464.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:45.008Z,1509705465.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:45.031Z,1509705465.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:45.408Z,1509705465.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:45.423Z,1509705465.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:45.819Z,1509705465.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:45.854Z,1509705465.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:46.212Z,1509705466.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:46.227Z,1509705466.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:46.608Z,1509705466.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:46.627Z,1509705466.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:47.021Z,1509705467.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:47.071Z,1509705467.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:47.421Z,1509705467.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:47.479Z,1509705467.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:47.821Z,1509705467.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:47.851Z,1509705467.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:48.211Z,1509705468.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:48.266Z,1509705468.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:48.608Z,1509705468.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:48.627Z,1509705468.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:49.008Z,1509705469.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:49.062Z,1509705469.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:49.407Z,1509705469.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:49.451Z,1509705469.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:49.825Z,1509705469.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:49.848Z,1509705469.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:50.221Z,1509705470.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:50.253Z,1509705470.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:50.621Z,1509705470.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:50.652Z,1509705470.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:51.008Z,1509705471.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:51.027Z,1509705471.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:51.411Z,1509705471.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:51.431Z,1509705471.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:51.854Z,1509705471.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:51.920Z,1509705471.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:52.208Z,1509705472.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:52.223Z,1509705472.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:52.608Z,1509705472.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:52.623Z,1509705472.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:53.021Z,1509705473.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:53.051Z,1509705473.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:53.425Z,1509705473.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:53.449Z,1509705473.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:53.821Z,1509705473.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:53.853Z,1509705473.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:54.213Z,1509705474.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:54.227Z,1509705474.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:54.608Z,1509705474.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:54.623Z,1509705474.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:55.008Z,1509705475.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:55.023Z,1509705475.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:55.408Z,1509705475.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:55.422Z,1509705475.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:55.821Z,1509705475.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:55.853Z,1509705475.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:56.225Z,1509705476.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:56.249Z,1509705476.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:56.621Z,1509705476.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:56.652Z,1509705476.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:57.008Z,1509705477.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:57.031Z,1509705477.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:57.408Z,1509705477.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:57.424Z,1509705477.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:57.820Z,1509705477.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:57.852Z,1509705477.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:58.208Z,1509705478.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:58.223Z,1509705478.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:58.608Z,1509705478.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:58.627Z,1509705478.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:59.021Z,1509705479.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:59.051Z,1509705479.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:59.421Z,1509705479.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:59.441Z,1509705479.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:37:59.821Z,1509705479.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:37:59.837Z,1509705479.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:00.219Z,1509705480.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:00.249Z,1509705480.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:00.611Z,1509705480.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:00.647Z,1509705480.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:01.010Z,1509705481.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:01.025Z,1509705481.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:01.408Z,1509705481.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:01.487Z,1509705481.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:01.820Z,1509705481.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:01.843Z,1509705481.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:02.221Z,1509705482.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:02.267Z,1509705482.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:05.433Z,1509705485.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:05.464Z,1509705485.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:05.590Z,1509705485.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:05.658Z,1509705485.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:06.008Z,1509705486.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:06.066Z,1509705486.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:06.394Z,1509705486.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:06.420Z,1509705486.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:06.813Z,1509705486.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:06.828Z,1509705486.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:07.211Z,1509705487.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:07.231Z,1509705487.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:07.613Z,1509705487.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:07.634Z,1509705487.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:07.991Z,1509705487.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:08.017Z,1509705488.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:08.387Z,1509705488.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:08.423Z,1509705488.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:08.786Z,1509705488.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:08.817Z,1509705488.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:09.192Z,1509705489.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:09.218Z,1509705489.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:09.591Z,1509705489.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:09.616Z,1509705489.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:10.014Z,1509705490.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:10.028Z,1509705490.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:10.420Z,1509705490.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:10.439Z,1509705490.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:10.809Z,1509705490.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:10.824Z,1509705490.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:11.189Z,1509705491.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:11.226Z,1509705491.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:11.627Z,1509705491.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:11.658Z,1509705491.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:11.994Z,1509705491.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:12.020Z,1509705492.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:12.394Z,1509705492.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:12.420Z,1509705492.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:12.812Z,1509705492.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:12.835Z,1509705492.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:13.218Z,1509705493.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:13.233Z,1509705493.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:13.630Z,1509705493.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:13.645Z,1509705493.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:13.991Z,1509705493.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:14.017Z,1509705494.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:14.392Z,1509705494.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:14.417Z,1509705494.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:14.791Z,1509705494.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:14.822Z,1509705494.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:15.192Z,1509705495.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:15.229Z,1509705495.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:15.632Z,1509705495.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:15.669Z,1509705495.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:16.013Z,1509705496.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:16.028Z,1509705496.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:16.413Z,1509705496.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:16.428Z,1509705496.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:16.811Z,1509705496.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:16.831Z,1509705496.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:17.194Z,1509705497.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:17.226Z,1509705497.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:17.591Z,1509705497.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:17.674Z,1509705497.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:17.713Z,1509705497.713 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:38:17.713Z,1509705497.713 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-11-03T10:38:17.713Z,1509705497.713 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:38:17.796Z,1509705497.796 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:38:17.992Z,1509705497.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:18.066Z,1509705498.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-11-03T10:38:18.067Z,1509705498.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:18.116Z,1509705498.116 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:38:18.233Z,1509705498.233 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:38:18.398Z,1509705498.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:18.405Z,1509705498.405 [PNI_TCM](ERROR): CRC does not match. Expected:0x23595 got:0x49596
2017-11-03T10:38:18.461Z,1509705498.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-11-03T10:38:18.462Z,1509705498.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:18.809Z,1509705498.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:18.839Z,1509705498.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:38:18.840Z,1509705498.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:19.205Z,1509705499.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:19.220Z,1509705499.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:38:19.237Z,1509705499.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:19.611Z,1509705499.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:19.650Z,1509705499.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:38:19.652Z,1509705499.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:19.732Z,1509705499.732 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:38:19.732Z,1509705499.732 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-03T10:38:19.848Z,1509705499.848 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:38:19.849Z,1509705499.849 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:38:19.849Z,1509705499.849 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:38:19.849Z,1509705499.849 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:38:19.993Z,1509705499.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:20.020Z,1509705500.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-03T10:38:20.022Z,1509705500.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:20.398Z,1509705500.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:20.450Z,1509705500.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:38:20.451Z,1509705500.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:20.799Z,1509705500.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:20.851Z,1509705500.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:38:20.852Z,1509705500.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:21.198Z,1509705501.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:21.215Z,1509705501.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-03T10:38:21.216Z,1509705501.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:21.599Z,1509705501.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:21.614Z,1509705501.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-03T10:38:21.615Z,1509705501.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:22.005Z,1509705502.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:22.019Z,1509705502.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:38:22.021Z,1509705502.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:22.406Z,1509705502.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:22.420Z,1509705502.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:38:22.421Z,1509705502.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:22.803Z,1509705502.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:22.818Z,1509705502.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:38:22.819Z,1509705502.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:23.197Z,1509705503.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:23.211Z,1509705503.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-03T10:38:23.212Z,1509705503.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:23.600Z,1509705503.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:23.622Z,1509705503.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:38:23.623Z,1509705503.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:24.010Z,1509705504.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:24.039Z,1509705504.039 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:38:24.067Z,1509705504.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:38:24.073Z,1509705504.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:24.152Z,1509705504.152 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:38:24.153Z,1509705504.153 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:38:24.154Z,1509705504.154 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:38:24.154Z,1509705504.154 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:38:24.406Z,1509705504.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:24.421Z,1509705504.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:38:24.422Z,1509705504.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:24.812Z,1509705504.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:24.828Z,1509705504.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:25.208Z,1509705505.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:25.224Z,1509705505.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:25.607Z,1509705505.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:25.623Z,1509705505.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:26.008Z,1509705506.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:26.031Z,1509705506.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:26.404Z,1509705506.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:26.425Z,1509705506.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:26.802Z,1509705506.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:26.817Z,1509705506.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:27.200Z,1509705507.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:27.216Z,1509705507.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:27.599Z,1509705507.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:27.617Z,1509705507.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:28.016Z,1509705508.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:28.048Z,1509705508.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:28.409Z,1509705508.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:28.425Z,1509705508.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:28.809Z,1509705508.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:28.825Z,1509705508.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:29.205Z,1509705509.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:29.220Z,1509705509.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:29.605Z,1509705509.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:29.620Z,1509705509.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:30.002Z,1509705510.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:30.017Z,1509705510.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:30.418Z,1509705510.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:30.458Z,1509705510.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:30.811Z,1509705510.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:30.836Z,1509705510.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:31.220Z,1509705511.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:31.235Z,1509705511.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:31.613Z,1509705511.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:31.628Z,1509705511.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:31.992Z,1509705511.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:32.026Z,1509705512.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:32.388Z,1509705512.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:32.421Z,1509705512.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:32.786Z,1509705512.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:32.888Z,1509705512.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:33.188Z,1509705513.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:33.214Z,1509705513.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:33.638Z,1509705513.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:33.715Z,1509705513.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:34.014Z,1509705514.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:34.030Z,1509705514.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:34.407Z,1509705514.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:34.462Z,1509705514.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:34.809Z,1509705514.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:34.867Z,1509705514.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:35.191Z,1509705515.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:35.217Z,1509705515.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:35.625Z,1509705515.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:35.681Z,1509705515.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:35.992Z,1509705515.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:36.019Z,1509705516.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:36.391Z,1509705516.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:36.417Z,1509705516.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:36.813Z,1509705516.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:36.829Z,1509705516.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:37.217Z,1509705517.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:37.232Z,1509705517.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:37.638Z,1509705517.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:37.659Z,1509705517.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:37.991Z,1509705517.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:38.017Z,1509705518.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:38.392Z,1509705518.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:38.417Z,1509705518.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:38.785Z,1509705518.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:38.832Z,1509705518.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:39.190Z,1509705519.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:39.217Z,1509705519.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:39.634Z,1509705519.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:39.681Z,1509705519.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:40.014Z,1509705520.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:40.029Z,1509705520.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:40.417Z,1509705520.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:40.432Z,1509705520.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:40.811Z,1509705520.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:40.826Z,1509705520.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:41.187Z,1509705521.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:41.218Z,1509705521.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:41.589Z,1509705521.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:41.664Z,1509705521.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:41.992Z,1509705521.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:42.035Z,1509705522.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:42.397Z,1509705522.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:42.404Z,1509705522.404 [PNI_TCM](ERROR): CRC does not match. Expected:0x5619 got:0x48334
2017-11-03T10:38:42.438Z,1509705522.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:42.810Z,1509705522.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:42.839Z,1509705522.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:43.205Z,1509705523.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:43.231Z,1509705523.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:43.604Z,1509705523.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:43.633Z,1509705523.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:44.006Z,1509705524.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:44.035Z,1509705524.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:44.395Z,1509705524.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:44.410Z,1509705524.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:44.798Z,1509705524.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:44.813Z,1509705524.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:45.199Z,1509705525.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:45.217Z,1509705525.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:45.597Z,1509705525.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:45.618Z,1509705525.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:46.006Z,1509705526.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:46.027Z,1509705526.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:46.404Z,1509705526.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:46.419Z,1509705526.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:46.806Z,1509705526.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:46.882Z,1509705526.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:47.186Z,1509705527.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:47.224Z,1509705527.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:47.602Z,1509705527.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:47.618Z,1509705527.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:47.999Z,1509705527.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:48.058Z,1509705528.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:48.391Z,1509705528.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:48.422Z,1509705528.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:48.808Z,1509705528.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:48.866Z,1509705528.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:49.208Z,1509705529.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:49.266Z,1509705529.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:49.672Z,1509705529.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:49.687Z,1509705529.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:49.991Z,1509705529.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:50.030Z,1509705530.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:50.391Z,1509705530.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:50.427Z,1509705530.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:50.791Z,1509705530.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:50.823Z,1509705530.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:51.201Z,1509705531.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:51.217Z,1509705531.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:51.629Z,1509705531.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:51.677Z,1509705531.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:52.015Z,1509705532.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:52.034Z,1509705532.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:52.413Z,1509705532.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:52.428Z,1509705532.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:52.812Z,1509705532.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:52.827Z,1509705532.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:53.191Z,1509705533.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:53.227Z,1509705533.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:53.637Z,1509705533.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:53.686Z,1509705533.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:53.992Z,1509705533.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:54.018Z,1509705534.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:54.391Z,1509705534.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:54.435Z,1509705534.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:54.816Z,1509705534.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:54.835Z,1509705534.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:55.214Z,1509705535.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:55.235Z,1509705535.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:55.626Z,1509705535.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:55.683Z,1509705535.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:55.991Z,1509705535.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:56.026Z,1509705536.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:56.388Z,1509705536.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:56.431Z,1509705536.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:56.786Z,1509705536.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:56.823Z,1509705536.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:57.195Z,1509705537.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:57.226Z,1509705537.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:57.592Z,1509705537.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:57.622Z,1509705537.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:58.004Z,1509705538.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:58.030Z,1509705538.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:58.415Z,1509705538.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:58.435Z,1509705538.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:58.802Z,1509705538.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:58.835Z,1509705538.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:59.192Z,1509705539.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:59.226Z,1509705539.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:59.591Z,1509705539.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:59.623Z,1509705539.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:38:59.992Z,1509705539.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:38:59.999Z,1509705539.999 [PNI_TCM](ERROR): CRC does not match. Expected:0x21066 got:0x48318
2017-11-03T10:39:00.022Z,1509705540.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:00.390Z,1509705540.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:00.426Z,1509705540.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:00.814Z,1509705540.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:00.840Z,1509705540.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:01.204Z,1509705541.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:01.271Z,1509705541.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:01.604Z,1509705541.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:01.627Z,1509705541.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:01.631Z,1509705541.631 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T10:34:01.5Z
2017-11-03T10:39:01.631Z,1509705541.631 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T10:39:01.631Z,1509705541.631 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T10:39:01.998Z,1509705541.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:02.022Z,1509705542.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:02.519Z,1509705542.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:02.578Z,1509705542.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:05.676Z,1509705545.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:05.691Z,1509705545.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:05.789Z,1509705545.789 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171103T001125/Courier0244.lzma
2017-11-03T10:39:05.827Z,1509705545.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:05.887Z,1509705545.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:06.232Z,1509705546.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:06.279Z,1509705546.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:06.587Z,1509705546.587 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0244.lzma.bak
2017-11-03T10:39:06.587Z,1509705546.587 [DataOverHttps](INFO): SBD MOMSN=5183355
2017-11-03T10:39:06.638Z,1509705546.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:06.663Z,1509705546.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:07.246Z,1509705547.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:07.261Z,1509705547.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:07.411Z,1509705547.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:07.439Z,1509705547.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:10.698Z,1509705550.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:10.713Z,1509705550.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:10.860Z,1509705550.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:10.896Z,1509705550.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:11.274Z,1509705551.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:11.301Z,1509705551.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:11.674Z,1509705551.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:11.709Z,1509705551.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:12.093Z,1509705552.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:12.108Z,1509705552.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:12.464Z,1509705552.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:12.480Z,1509705552.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:15.674Z,1509705555.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:15.699Z,1509705555.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:15.805Z,1509705555.805 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171103T001125/Express0245.lzma
2017-11-03T10:39:15.827Z,1509705555.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:15.879Z,1509705555.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:16.258Z,1509705556.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:16.273Z,1509705556.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:16.607Z,1509705556.607 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0245.lzma.bak
2017-11-03T10:39:16.607Z,1509705556.607 [DataOverHttps](INFO): SBD MOMSN=5183357
2017-11-03T10:39:16.657Z,1509705556.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:16.680Z,1509705556.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:17.258Z,1509705557.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:17.323Z,1509705557.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:17.326Z,1509705557.326 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T10:39:17.326Z,1509705557.326 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T10:39:17.326Z,1509705557.326 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T10:39:17.460Z,1509705557.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:17.502Z,1509705557.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:20.633Z,1509705560.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:20.664Z,1509705560.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:20.888Z,1509705560.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:20.923Z,1509705560.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:21.289Z,1509705561.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:21.307Z,1509705561.307 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:39:21.307Z,1509705561.307 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:39:21.307Z,1509705561.307 [BPC1](ERROR): Communications Fault
2017-11-03T10:39:21.316Z,1509705561.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:21.400Z,1509705561.400 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:39:21.706Z,1509705561.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:21.723Z,1509705561.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:22.089Z,1509705562.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:22.114Z,1509705562.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:22.473Z,1509705562.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:22.488Z,1509705562.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:22.588Z,1509705562.588 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:39:22.588Z,1509705562.588 [BPC1] No Fault, FailCount= 1
2017-11-03T10:39:22.873Z,1509705562.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:22.958Z,1509705562.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:23.274Z,1509705563.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:23.289Z,1509705563.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:23.693Z,1509705563.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:23.737Z,1509705563.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:24.085Z,1509705564.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:24.116Z,1509705564.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:24.485Z,1509705564.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:24.517Z,1509705564.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:24.889Z,1509705564.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:24.921Z,1509705564.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:25.275Z,1509705565.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:25.290Z,1509705565.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:25.724Z,1509705565.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:25.739Z,1509705565.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:26.080Z,1509705566.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:26.123Z,1509705566.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:26.479Z,1509705566.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:26.494Z,1509705566.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:26.885Z,1509705566.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:26.917Z,1509705566.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:27.289Z,1509705567.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:27.328Z,1509705567.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:27.685Z,1509705567.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:27.700Z,1509705567.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:28.072Z,1509705568.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:28.149Z,1509705568.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:28.480Z,1509705568.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:28.495Z,1509705568.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:28.881Z,1509705568.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:28.902Z,1509705568.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:29.283Z,1509705569.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:29.303Z,1509705569.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:29.682Z,1509705569.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:29.697Z,1509705569.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:30.102Z,1509705570.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:30.179Z,1509705570.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:30.485Z,1509705570.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:30.501Z,1509705570.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:30.884Z,1509705570.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:30.900Z,1509705570.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:31.282Z,1509705571.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:31.297Z,1509705571.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:31.684Z,1509705571.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:31.699Z,1509705571.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:32.082Z,1509705572.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:32.097Z,1509705572.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:32.477Z,1509705572.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:32.491Z,1509705572.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:32.886Z,1509705572.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:32.901Z,1509705572.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:33.285Z,1509705573.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:33.307Z,1509705573.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:33.690Z,1509705573.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:33.706Z,1509705573.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:34.081Z,1509705574.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:34.104Z,1509705574.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:34.480Z,1509705574.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:34.495Z,1509705574.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:34.885Z,1509705574.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:34.900Z,1509705574.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:34.900Z,1509705574.900 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 208
2017-11-03T10:39:34.900Z,1509705574.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:39:34.902Z,1509705574.902 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:34.902Z,1509705574.902 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 208
2017-11-03T10:39:34.902Z,1509705574.902 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:39:34.904Z,1509705574.904 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:34.904Z,1509705574.904 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 208
2017-11-03T10:39:34.904Z,1509705574.904 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:39:34.981Z,1509705574.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:39:34.981Z,1509705574.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:39:34.981Z,1509705574.981 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:39:35.292Z,1509705575.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:35.380Z,1509705575.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:39:35.381Z,1509705575.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 208
2017-11-03T10:39:35.381Z,1509705575.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:39:35.381Z,1509705575.381 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 208
2017-11-03T10:39:35.382Z,1509705575.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:39:35.382Z,1509705575.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 208
2017-11-03T10:39:35.671Z,1509705575.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:35.701Z,1509705575.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:39:35.701Z,1509705575.701 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:39:35.701Z,1509705575.701 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:39:35.702Z,1509705575.702 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:39:35.702Z,1509705575.702 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:39:35.703Z,1509705575.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:39:35.703Z,1509705575.703 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:39:35.703Z,1509705575.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:39:35.704Z,1509705575.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:39:36.094Z,1509705576.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:36.109Z,1509705576.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:36.496Z,1509705576.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:36.512Z,1509705576.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:36.894Z,1509705576.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:36.910Z,1509705576.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:37.275Z,1509705577.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:37.301Z,1509705577.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:37.692Z,1509705577.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:37.769Z,1509705577.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:38.076Z,1509705578.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:38.101Z,1509705578.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:38.475Z,1509705578.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:38.501Z,1509705578.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:38.893Z,1509705578.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:38.950Z,1509705578.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:39.293Z,1509705579.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:39.308Z,1509705579.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:39.697Z,1509705579.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:39.746Z,1509705579.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:40.071Z,1509705580.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:40.099Z,1509705580.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:40.472Z,1509705580.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:40.531Z,1509705580.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:40.875Z,1509705580.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:40.910Z,1509705580.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:41.274Z,1509705581.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:41.305Z,1509705581.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:41.675Z,1509705581.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:41.712Z,1509705581.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:42.147Z,1509705582.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:42.213Z,1509705582.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:42.490Z,1509705582.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:42.519Z,1509705582.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:42.885Z,1509705582.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:42.915Z,1509705582.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:43.276Z,1509705583.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:43.291Z,1509705583.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:43.672Z,1509705583.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:43.714Z,1509705583.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:44.077Z,1509705584.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:44.144Z,1509705584.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:44.476Z,1509705584.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:44.500Z,1509705584.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:44.889Z,1509705584.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:44.927Z,1509705584.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:45.289Z,1509705585.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:45.325Z,1509705585.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:45.686Z,1509705585.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:45.700Z,1509705585.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:46.080Z,1509705586.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:46.096Z,1509705586.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:46.478Z,1509705586.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:46.497Z,1509705586.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:46.880Z,1509705586.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:46.895Z,1509705586.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:47.282Z,1509705587.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:47.297Z,1509705587.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:47.682Z,1509705587.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:47.705Z,1509705587.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:48.056Z,1509705588.056 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T10:39:48.056Z,1509705588.056 [NAL9602] Data Fault, FailCount= 2
2017-11-03T10:39:48.056Z,1509705588.056 [NAL9602](ERROR): Data Fault
2017-11-03T10:39:48.094Z,1509705588.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:48.109Z,1509705588.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:48.200Z,1509705588.200 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T10:39:48.455Z,1509705588.455 [NAL9602](INFO): Powering down
2017-11-03T10:39:48.482Z,1509705588.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:48.503Z,1509705588.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:48.881Z,1509705588.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:48.897Z,1509705588.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:49.282Z,1509705589.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:49.302Z,1509705589.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:49.416Z,1509705589.416 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T10:39:49.416Z,1509705589.416 [NAL9602] No Fault, FailCount= 2
2017-11-03T10:39:49.686Z,1509705589.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:49.701Z,1509705589.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:50.079Z,1509705590.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:50.107Z,1509705590.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:50.482Z,1509705590.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:50.497Z,1509705590.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:50.885Z,1509705590.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:50.901Z,1509705590.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:51.282Z,1509705591.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:51.347Z,1509705591.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:51.691Z,1509705591.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:51.740Z,1509705591.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:52.073Z,1509705592.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:52.141Z,1509705592.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:52.475Z,1509705592.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:52.507Z,1509705592.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:52.871Z,1509705592.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:52.924Z,1509705592.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:53.276Z,1509705593.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:53.341Z,1509705593.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:53.673Z,1509705593.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:53.701Z,1509705593.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:54.074Z,1509705594.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:54.103Z,1509705594.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:54.472Z,1509705594.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:54.499Z,1509705594.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:54.872Z,1509705594.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:54.943Z,1509705594.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:55.273Z,1509705595.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:55.306Z,1509705595.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:55.671Z,1509705595.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:55.698Z,1509705595.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:56.071Z,1509705596.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:56.187Z,1509705596.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:56.476Z,1509705596.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:56.490Z,1509705596.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:56.877Z,1509705596.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:56.892Z,1509705596.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:57.276Z,1509705597.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:57.290Z,1509705597.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:57.676Z,1509705597.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:57.690Z,1509705597.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:58.070Z,1509705598.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:58.151Z,1509705598.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:58.473Z,1509705598.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:58.488Z,1509705598.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:58.878Z,1509705598.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:58.893Z,1509705598.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:59.271Z,1509705599.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:59.286Z,1509705599.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:39:59.684Z,1509705599.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:39:59.724Z,1509705599.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:00.071Z,1509705600.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:00.087Z,1509705600.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:00.481Z,1509705600.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:00.518Z,1509705600.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:00.876Z,1509705600.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:00.891Z,1509705600.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:01.271Z,1509705601.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:01.313Z,1509705601.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:01.694Z,1509705601.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:01.734Z,1509705601.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:02.076Z,1509705602.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:02.092Z,1509705602.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:02.470Z,1509705602.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:02.498Z,1509705602.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:02.875Z,1509705602.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:02.911Z,1509705602.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:03.271Z,1509705603.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:03.290Z,1509705603.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:03.682Z,1509705603.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:03.747Z,1509705603.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:04.075Z,1509705604.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:04.127Z,1509705604.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:04.475Z,1509705604.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:04.490Z,1509705604.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:04.870Z,1509705604.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:04.908Z,1509705604.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:05.282Z,1509705605.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:05.342Z,1509705605.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:05.712Z,1509705605.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:05.743Z,1509705605.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:06.082Z,1509705606.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:06.120Z,1509705606.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:06.468Z,1509705606.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:06.531Z,1509705606.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:06.872Z,1509705606.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:06.898Z,1509705606.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:07.268Z,1509705607.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:07.298Z,1509705607.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:07.682Z,1509705607.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:07.698Z,1509705607.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:08.070Z,1509705608.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:08.096Z,1509705608.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:08.482Z,1509705608.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:08.497Z,1509705608.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:08.882Z,1509705608.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:08.898Z,1509705608.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:09.280Z,1509705609.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:09.297Z,1509705609.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:09.682Z,1509705609.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:09.697Z,1509705609.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:10.082Z,1509705610.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:10.155Z,1509705610.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:10.468Z,1509705610.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:10.498Z,1509705610.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:10.874Z,1509705610.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:10.900Z,1509705610.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:11.268Z,1509705611.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:11.296Z,1509705611.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:11.672Z,1509705611.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:11.701Z,1509705611.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:12.074Z,1509705612.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:12.171Z,1509705612.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:12.479Z,1509705612.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:12.495Z,1509705612.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:12.879Z,1509705612.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:12.895Z,1509705612.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:13.279Z,1509705613.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:13.294Z,1509705613.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:13.683Z,1509705613.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:13.699Z,1509705613.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:14.081Z,1509705614.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:14.218Z,1509705614.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:14.479Z,1509705614.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:14.494Z,1509705614.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:14.881Z,1509705614.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:14.896Z,1509705614.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:15.279Z,1509705615.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:15.295Z,1509705615.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:15.683Z,1509705615.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:15.699Z,1509705615.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:16.080Z,1509705616.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:16.095Z,1509705616.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:16.480Z,1509705616.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:16.495Z,1509705616.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:16.880Z,1509705616.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:16.895Z,1509705616.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:17.279Z,1509705617.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:17.345Z,1509705617.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:17.683Z,1509705617.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:17.734Z,1509705617.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:20.488Z,1509705620.488 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-11-03T10:40:20.488Z,1509705620.488 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-11-03T10:40:20.488Z,1509705620.488 [Rowe_600LCM](ERROR): Communications Fault
2017-11-03T10:40:20.851Z,1509705620.851 [NAL9602](INFO): Powering up NAL9602
2017-11-03T10:40:20.877Z,1509705620.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:20.893Z,1509705620.893 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-03T10:40:20.966Z,1509705620.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:40:20.967Z,1509705620.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:21.069Z,1509705621.069 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-11-03T10:40:21.069Z,1509705621.069 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-11-03T10:40:21.074Z,1509705621.074 [Rowe_600LCM](INFO): Powering down
2017-11-03T10:40:21.104Z,1509705621.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:21.154Z,1509705621.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-03T10:40:21.155Z,1509705621.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:21.506Z,1509705621.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:21.569Z,1509705621.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-03T10:40:21.571Z,1509705621.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:21.904Z,1509705621.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:21.929Z,1509705621.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-03T10:40:21.930Z,1509705621.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:22.303Z,1509705622.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:22.372Z,1509705622.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-03T10:40:22.374Z,1509705622.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:22.707Z,1509705622.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:22.756Z,1509705622.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-03T10:40:22.773Z,1509705622.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:23.106Z,1509705623.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:23.131Z,1509705623.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-03T10:40:23.132Z,1509705623.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:23.507Z,1509705623.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:23.532Z,1509705623.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-03T10:40:23.533Z,1509705623.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:23.905Z,1509705623.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:23.934Z,1509705623.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-03T10:40:23.935Z,1509705623.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:24.307Z,1509705624.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:24.331Z,1509705624.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-03T10:40:24.332Z,1509705624.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:24.706Z,1509705624.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:24.732Z,1509705624.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-03T10:40:24.733Z,1509705624.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:25.104Z,1509705625.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:25.129Z,1509705625.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-03T10:40:25.130Z,1509705625.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:25.500Z,1509705625.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:25.529Z,1509705625.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-03T10:40:25.530Z,1509705625.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:25.900Z,1509705625.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:25.933Z,1509705625.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-03T10:40:25.934Z,1509705625.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:26.306Z,1509705626.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:26.355Z,1509705626.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-03T10:40:26.372Z,1509705626.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:26.700Z,1509705626.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:26.729Z,1509705626.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-03T10:40:26.730Z,1509705626.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:27.106Z,1509705627.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:27.132Z,1509705627.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-03T10:40:27.133Z,1509705627.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:27.504Z,1509705627.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:27.529Z,1509705627.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-03T10:40:27.530Z,1509705627.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:27.906Z,1509705627.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:27.931Z,1509705627.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-03T10:40:27.932Z,1509705627.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:28.300Z,1509705628.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:28.323Z,1509705628.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-03T10:40:28.328Z,1509705628.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:28.706Z,1509705628.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:28.731Z,1509705628.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-03T10:40:28.732Z,1509705628.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:29.106Z,1509705629.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:29.130Z,1509705629.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-03T10:40:29.132Z,1509705629.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:29.507Z,1509705629.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:29.532Z,1509705629.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-03T10:40:29.533Z,1509705629.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:29.906Z,1509705629.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:29.931Z,1509705629.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-03T10:40:29.932Z,1509705629.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:30.307Z,1509705630.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:30.338Z,1509705630.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-03T10:40:30.339Z,1509705630.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:30.707Z,1509705630.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:30.732Z,1509705630.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-03T10:40:30.734Z,1509705630.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:31.106Z,1509705631.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:31.130Z,1509705631.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-03T10:40:31.131Z,1509705631.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:31.529Z,1509705631.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:31.544Z,1509705631.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-03T10:40:31.545Z,1509705631.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:31.890Z,1509705631.890 [NAL9602](INFO): NAL9602 initialized
2017-11-03T10:40:31.907Z,1509705631.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:31.937Z,1509705631.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-03T10:40:31.938Z,1509705631.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:32.304Z,1509705632.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:32.338Z,1509705632.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-03T10:40:32.339Z,1509705632.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:32.724Z,1509705632.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:32.739Z,1509705632.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-03T10:40:32.740Z,1509705632.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:33.125Z,1509705633.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:33.133Z,1509705633.133 [BPC1](ERROR): Failed to parse message.
2017-11-03T10:40:33.133Z,1509705633.133 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:40:33.133Z,1509705633.133 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:40:33.133Z,1509705633.133 [BPC1](ERROR): Data Fault
2017-11-03T10:40:33.141Z,1509705633.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-03T10:40:33.142Z,1509705633.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:33.225Z,1509705633.225 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:40:33.529Z,1509705633.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:33.550Z,1509705633.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-03T10:40:33.551Z,1509705633.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:33.901Z,1509705633.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:33.931Z,1509705633.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-03T10:40:33.932Z,1509705633.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:34.300Z,1509705634.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:34.315Z,1509705634.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-03T10:40:34.316Z,1509705634.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:34.425Z,1509705634.425 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:40:34.426Z,1509705634.426 [BPC1] No Fault, FailCount= 1
2017-11-03T10:40:34.708Z,1509705634.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:34.783Z,1509705634.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-03T10:40:34.784Z,1509705634.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:35.107Z,1509705635.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:35.141Z,1509705635.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-03T10:40:35.142Z,1509705635.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:35.517Z,1509705635.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:35.580Z,1509705635.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-03T10:40:35.581Z,1509705635.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:35.917Z,1509705635.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:35.950Z,1509705635.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-03T10:40:35.951Z,1509705635.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:36.317Z,1509705636.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:36.350Z,1509705636.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-03T10:40:36.351Z,1509705636.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:36.707Z,1509705636.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:36.742Z,1509705636.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-03T10:40:36.743Z,1509705636.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:37.107Z,1509705637.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:37.122Z,1509705637.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-03T10:40:37.123Z,1509705637.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:37.504Z,1509705637.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:37.519Z,1509705637.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-03T10:40:37.520Z,1509705637.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:37.907Z,1509705637.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:37.922Z,1509705637.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:38.307Z,1509705638.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:38.322Z,1509705638.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:38.717Z,1509705638.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:38.743Z,1509705638.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:39.117Z,1509705639.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:39.144Z,1509705639.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:39.521Z,1509705639.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:39.544Z,1509705639.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:39.901Z,1509705639.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:39.915Z,1509705639.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:40.304Z,1509705640.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:40.319Z,1509705640.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:40.708Z,1509705640.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:40.723Z,1509705640.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:41.107Z,1509705641.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:41.146Z,1509705641.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:41.517Z,1509705641.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:41.541Z,1509705641.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:41.932Z,1509705641.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:41.947Z,1509705641.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:42.317Z,1509705642.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:42.341Z,1509705642.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:42.704Z,1509705642.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:42.719Z,1509705642.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:43.104Z,1509705643.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:43.119Z,1509705643.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:43.511Z,1509705643.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:43.546Z,1509705643.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:43.904Z,1509705643.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:43.919Z,1509705643.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:44.304Z,1509705644.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:44.319Z,1509705644.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:44.717Z,1509705644.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:44.742Z,1509705644.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:45.117Z,1509705645.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:45.142Z,1509705645.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:45.532Z,1509705645.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:45.547Z,1509705645.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:45.904Z,1509705645.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:45.919Z,1509705645.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:46.303Z,1509705646.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:46.367Z,1509705646.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:46.712Z,1509705646.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:46.755Z,1509705646.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:47.104Z,1509705647.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:47.119Z,1509705647.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:47.521Z,1509705647.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:47.552Z,1509705647.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:47.925Z,1509705647.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:47.993Z,1509705647.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:48.321Z,1509705648.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:48.356Z,1509705648.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:48.709Z,1509705648.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:48.766Z,1509705648.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:49.108Z,1509705649.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:49.124Z,1509705649.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:49.508Z,1509705649.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:49.558Z,1509705649.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:49.920Z,1509705649.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:49.935Z,1509705649.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:50.309Z,1509705650.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:50.331Z,1509705650.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:50.722Z,1509705650.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:50.753Z,1509705650.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:51.125Z,1509705651.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:51.155Z,1509705651.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:51.525Z,1509705651.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:51.556Z,1509705651.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:51.913Z,1509705651.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:51.928Z,1509705651.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:52.312Z,1509705652.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:52.331Z,1509705652.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:52.715Z,1509705652.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:52.730Z,1509705652.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:53.113Z,1509705653.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:53.128Z,1509705653.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:53.525Z,1509705653.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:53.555Z,1509705653.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:53.926Z,1509705653.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:53.956Z,1509705653.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:54.315Z,1509705654.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:54.335Z,1509705654.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:54.713Z,1509705654.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:54.735Z,1509705654.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:55.113Z,1509705655.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:55.129Z,1509705655.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:55.510Z,1509705655.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:55.526Z,1509705655.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:55.908Z,1509705655.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:55.935Z,1509705655.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:56.315Z,1509705656.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:56.331Z,1509705656.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:56.718Z,1509705656.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:56.734Z,1509705656.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:57.118Z,1509705657.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:57.133Z,1509705657.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:57.520Z,1509705657.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:57.569Z,1509705657.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:57.915Z,1509705657.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:57.931Z,1509705657.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:58.312Z,1509705658.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:58.339Z,1509705658.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:58.705Z,1509705658.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:58.743Z,1509705658.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:59.109Z,1509705659.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:59.162Z,1509705659.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:59.525Z,1509705659.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:40:59.553Z,1509705659.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:40:59.941Z,1509705659.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:00.002Z,1509705660.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:00.318Z,1509705660.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:00.435Z,1509705660.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:00.713Z,1509705660.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:00.741Z,1509705660.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:01.103Z,1509705661.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:01.143Z,1509705661.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:01.500Z,1509705661.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:01.535Z,1509705661.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:01.904Z,1509705661.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:01.955Z,1509705661.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:02.382Z,1509705662.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:02.439Z,1509705662.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:02.723Z,1509705662.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:02.759Z,1509705662.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:03.127Z,1509705663.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:03.151Z,1509705663.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:03.527Z,1509705663.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:03.598Z,1509705663.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:03.905Z,1509705663.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:03.949Z,1509705663.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:04.304Z,1509705664.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:04.351Z,1509705664.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:04.706Z,1509705664.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:04.744Z,1509705664.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:05.105Z,1509705665.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:05.187Z,1509705665.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:05.515Z,1509705665.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:05.558Z,1509705665.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:05.919Z,1509705665.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:05.950Z,1509705665.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:06.315Z,1509705666.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:06.347Z,1509705666.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:06.703Z,1509705666.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:06.735Z,1509705666.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:07.113Z,1509705667.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:07.169Z,1509705667.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:07.514Z,1509705667.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:07.538Z,1509705667.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:07.923Z,1509705667.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:07.961Z,1509705667.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:08.321Z,1509705668.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:08.366Z,1509705668.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:08.714Z,1509705668.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:08.758Z,1509705668.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:09.122Z,1509705669.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:09.147Z,1509705669.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:09.519Z,1509705669.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:09.547Z,1509705669.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:09.905Z,1509705669.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:09.927Z,1509705669.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:10.304Z,1509705670.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:10.324Z,1509705670.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:10.705Z,1509705670.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:10.728Z,1509705670.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:11.107Z,1509705671.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:11.138Z,1509705671.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:11.515Z,1509705671.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:11.551Z,1509705671.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:11.919Z,1509705671.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:11.951Z,1509705671.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:12.315Z,1509705672.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:12.343Z,1509705672.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:12.705Z,1509705672.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:12.759Z,1509705672.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:13.115Z,1509705673.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:13.190Z,1509705673.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:13.509Z,1509705673.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:13.541Z,1509705673.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:13.907Z,1509705673.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:13.923Z,1509705673.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:14.307Z,1509705674.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:14.354Z,1509705674.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:14.717Z,1509705674.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:14.733Z,1509705674.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:15.121Z,1509705675.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:15.187Z,1509705675.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:15.521Z,1509705675.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:15.559Z,1509705675.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:15.904Z,1509705675.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:15.919Z,1509705675.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:16.304Z,1509705676.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:16.327Z,1509705676.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:16.705Z,1509705676.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:16.720Z,1509705676.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:17.103Z,1509705677.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:17.123Z,1509705677.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:17.517Z,1509705677.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:17.533Z,1509705677.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:17.917Z,1509705677.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:17.931Z,1509705677.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:21.767Z,1509705681.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:21.815Z,1509705681.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:21.942Z,1509705681.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:21.971Z,1509705681.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:22.339Z,1509705682.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:22.371Z,1509705682.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:22.744Z,1509705682.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:22.769Z,1509705682.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:23.141Z,1509705683.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:23.174Z,1509705683.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:23.565Z,1509705683.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:23.580Z,1509705683.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:23.965Z,1509705683.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:23.980Z,1509705683.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:24.361Z,1509705684.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:24.379Z,1509705684.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:24.741Z,1509705684.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:24.777Z,1509705684.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:25.143Z,1509705685.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:25.168Z,1509705685.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:25.541Z,1509705685.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:25.570Z,1509705685.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:25.944Z,1509705685.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:25.969Z,1509705685.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:26.343Z,1509705686.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:26.399Z,1509705686.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:26.762Z,1509705686.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:26.777Z,1509705686.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:27.162Z,1509705687.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:27.177Z,1509705687.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:27.561Z,1509705687.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:27.621Z,1509705687.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:27.941Z,1509705687.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:27.973Z,1509705687.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:28.343Z,1509705688.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:28.391Z,1509705688.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:28.744Z,1509705688.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:28.796Z,1509705688.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:29.140Z,1509705689.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:29.155Z,1509705689.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:29.553Z,1509705689.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:29.590Z,1509705689.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:29.957Z,1509705689.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:29.991Z,1509705689.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:30.354Z,1509705690.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:30.379Z,1509705690.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:30.741Z,1509705690.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:30.755Z,1509705690.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:31.141Z,1509705691.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:31.155Z,1509705691.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:31.540Z,1509705691.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:31.555Z,1509705691.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:31.941Z,1509705691.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:31.955Z,1509705691.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:32.342Z,1509705692.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:32.357Z,1509705692.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:32.757Z,1509705692.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:32.785Z,1509705692.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:33.157Z,1509705693.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:33.183Z,1509705693.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:33.553Z,1509705693.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:33.586Z,1509705693.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:33.943Z,1509705693.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:33.963Z,1509705693.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:34.345Z,1509705694.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:34.360Z,1509705694.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:34.743Z,1509705694.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:34.758Z,1509705694.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:35.141Z,1509705695.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:35.175Z,1509705695.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:35.567Z,1509705695.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:35.586Z,1509705695.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:35.963Z,1509705695.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:35.981Z,1509705695.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:36.363Z,1509705696.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:36.378Z,1509705696.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:36.737Z,1509705696.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:36.775Z,1509705696.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:37.141Z,1509705697.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:37.172Z,1509705697.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:37.544Z,1509705697.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:37.576Z,1509705697.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:37.942Z,1509705697.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:37.970Z,1509705697.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:38.344Z,1509705698.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:38.375Z,1509705698.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:38.763Z,1509705698.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:38.782Z,1509705698.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:39.169Z,1509705699.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:39.234Z,1509705699.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:39.558Z,1509705699.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:39.596Z,1509705699.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:39.943Z,1509705699.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:39.970Z,1509705699.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:40.341Z,1509705700.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:40.371Z,1509705700.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:40.744Z,1509705700.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:40.822Z,1509705700.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:41.140Z,1509705701.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:41.176Z,1509705701.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:41.562Z,1509705701.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:41.578Z,1509705701.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:41.961Z,1509705701.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:42.016Z,1509705702.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:42.361Z,1509705702.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:42.380Z,1509705702.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:42.741Z,1509705702.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:42.791Z,1509705702.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:43.143Z,1509705703.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:43.198Z,1509705703.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:43.541Z,1509705703.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:43.572Z,1509705703.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:43.941Z,1509705703.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:43.956Z,1509705703.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:44.341Z,1509705704.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:44.379Z,1509705704.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:44.754Z,1509705704.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:44.785Z,1509705704.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:45.153Z,1509705705.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:45.188Z,1509705705.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:45.554Z,1509705705.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:45.586Z,1509705705.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:45.947Z,1509705705.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:45.962Z,1509705705.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:46.340Z,1509705706.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:46.354Z,1509705706.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:46.741Z,1509705706.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:46.756Z,1509705706.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:47.147Z,1509705707.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:47.162Z,1509705707.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:47.561Z,1509705707.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:47.587Z,1509705707.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:47.953Z,1509705707.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:47.988Z,1509705707.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:48.357Z,1509705708.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:48.372Z,1509705708.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:48.751Z,1509705708.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:48.818Z,1509705708.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:49.150Z,1509705709.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:49.165Z,1509705709.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:49.544Z,1509705709.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:49.559Z,1509705709.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:49.949Z,1509705709.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:49.964Z,1509705709.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:50.350Z,1509705710.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:50.367Z,1509705710.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:50.753Z,1509705710.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:50.769Z,1509705710.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:51.153Z,1509705711.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:51.168Z,1509705711.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:51.554Z,1509705711.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:51.569Z,1509705711.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:51.949Z,1509705711.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:51.966Z,1509705711.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:52.349Z,1509705712.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:52.370Z,1509705712.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:52.746Z,1509705712.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:52.761Z,1509705712.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:53.144Z,1509705713.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:53.159Z,1509705713.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:53.553Z,1509705713.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:53.572Z,1509705713.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:53.957Z,1509705713.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:53.973Z,1509705713.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:54.353Z,1509705714.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:54.368Z,1509705714.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:54.741Z,1509705714.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:54.756Z,1509705714.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:55.139Z,1509705715.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:55.195Z,1509705715.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:55.540Z,1509705715.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:55.575Z,1509705715.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:55.944Z,1509705715.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:55.990Z,1509705715.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:56.340Z,1509705716.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:56.355Z,1509705716.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:56.753Z,1509705716.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:56.820Z,1509705716.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:57.162Z,1509705717.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:57.207Z,1509705717.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:57.553Z,1509705717.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:57.583Z,1509705717.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:57.943Z,1509705717.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:57.976Z,1509705717.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:58.343Z,1509705718.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:58.371Z,1509705718.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:58.742Z,1509705718.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:58.757Z,1509705718.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:59.140Z,1509705719.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:59.155Z,1509705719.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:59.249Z,1509705719.249 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T10:41:59.553Z,1509705719.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:59.587Z,1509705719.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:41:59.953Z,1509705719.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:41:59.989Z,1509705719.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:00.357Z,1509705720.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:00.388Z,1509705720.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:00.747Z,1509705720.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:00.763Z,1509705720.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:01.122Z,1509705721.122 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-11-03T10:42:01.122Z,1509705721.122 [DropWeight] Hardware Fault, FailCount= 1
2017-11-03T10:42:01.122Z,1509705721.122 [DropWeight](ERROR): Hardware Fault
2017-11-03T10:42:01.140Z,1509705721.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:01.155Z,1509705721.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:01.235Z,1509705721.235 [CBIT](INFO): Critical error at 20171103T104201
2017-11-03T10:42:01.237Z,1509705721.237 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-11-03T10:42:01.238Z,1509705721.238 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-11-03T10:42:01.547Z,1509705721.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:01.562Z,1509705721.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:01.671Z,1509705721.671 [CBIT](INFO): Critical error at 20171103T104201
2017-11-03T10:42:01.945Z,1509705721.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:01.959Z,1509705721.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:02.343Z,1509705722.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:02.363Z,1509705722.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:02.757Z,1509705722.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:02.772Z,1509705722.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:03.153Z,1509705723.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:03.172Z,1509705723.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:03.550Z,1509705723.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:03.565Z,1509705723.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:03.947Z,1509705723.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:03.962Z,1509705723.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:04.346Z,1509705724.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:04.365Z,1509705724.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:04.748Z,1509705724.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:04.765Z,1509705724.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:05.147Z,1509705725.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:05.162Z,1509705725.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:05.561Z,1509705725.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:05.593Z,1509705725.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:05.957Z,1509705725.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:05.973Z,1509705725.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:06.353Z,1509705726.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:06.373Z,1509705726.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:06.751Z,1509705726.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:06.766Z,1509705726.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:07.150Z,1509705727.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:07.165Z,1509705727.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:07.548Z,1509705727.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:07.563Z,1509705727.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:07.951Z,1509705727.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:07.969Z,1509705727.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:08.350Z,1509705728.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:08.371Z,1509705728.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:08.754Z,1509705728.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:08.818Z,1509705728.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:09.161Z,1509705729.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:09.222Z,1509705729.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:09.558Z,1509705729.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:09.577Z,1509705729.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:09.949Z,1509705729.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:10.007Z,1509705730.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:10.350Z,1509705730.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:10.365Z,1509705730.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:10.751Z,1509705730.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:10.810Z,1509705730.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:11.139Z,1509705731.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:11.200Z,1509705731.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:11.561Z,1509705731.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:11.576Z,1509705731.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:11.957Z,1509705731.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:11.972Z,1509705731.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:12.361Z,1509705732.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:12.378Z,1509705732.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:12.753Z,1509705732.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:12.771Z,1509705732.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:13.151Z,1509705733.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:13.171Z,1509705733.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:13.540Z,1509705733.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:13.568Z,1509705733.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:13.954Z,1509705733.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:13.969Z,1509705733.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:14.337Z,1509705734.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:14.375Z,1509705734.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:14.762Z,1509705734.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:14.777Z,1509705734.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:15.159Z,1509705735.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:15.179Z,1509705735.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:15.558Z,1509705735.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:15.574Z,1509705735.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:15.953Z,1509705735.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:15.971Z,1509705735.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:16.337Z,1509705736.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:16.365Z,1509705736.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:16.753Z,1509705736.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:16.768Z,1509705736.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:17.149Z,1509705737.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:17.168Z,1509705737.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:17.559Z,1509705737.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:17.578Z,1509705737.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:17.961Z,1509705737.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:17.977Z,1509705737.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:21.078Z,1509705741.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:21.107Z,1509705741.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:21.237Z,1509705741.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:21.267Z,1509705741.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:21.650Z,1509705741.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:21.665Z,1509705741.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:22.039Z,1509705742.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:22.061Z,1509705742.061 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-03T10:42:22.061Z,1509705742.061 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:42:22.061Z,1509705742.061 [BPC1](ERROR): Data Fault
2017-11-03T10:42:22.075Z,1509705742.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:22.165Z,1509705742.165 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:42:22.459Z,1509705742.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:22.479Z,1509705742.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:22.858Z,1509705742.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:22.873Z,1509705742.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:23.260Z,1509705743.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:23.275Z,1509705743.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:23.357Z,1509705743.357 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:42:23.357Z,1509705743.357 [BPC1] No Fault, FailCount= 1
2017-11-03T10:42:23.636Z,1509705743.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:23.719Z,1509705743.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:24.037Z,1509705744.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:24.064Z,1509705744.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:24.459Z,1509705744.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:24.475Z,1509705744.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:24.861Z,1509705744.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:24.911Z,1509705744.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:25.258Z,1509705745.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:25.274Z,1509705745.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:25.651Z,1509705745.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:25.666Z,1509705745.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:26.039Z,1509705746.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:26.066Z,1509705746.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:26.458Z,1509705746.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:26.473Z,1509705746.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:26.862Z,1509705746.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:26.877Z,1509705746.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:27.259Z,1509705747.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:27.274Z,1509705747.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:27.637Z,1509705747.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:27.664Z,1509705747.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:28.039Z,1509705748.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:28.066Z,1509705748.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:28.458Z,1509705748.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:28.473Z,1509705748.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:28.857Z,1509705748.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:28.875Z,1509705748.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:29.257Z,1509705749.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:29.274Z,1509705749.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:29.639Z,1509705749.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:29.665Z,1509705749.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:30.036Z,1509705750.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:30.066Z,1509705750.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:30.452Z,1509705750.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:30.467Z,1509705750.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:30.857Z,1509705750.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:30.871Z,1509705750.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:31.257Z,1509705751.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:31.272Z,1509705751.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:31.636Z,1509705751.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:31.662Z,1509705751.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:32.039Z,1509705752.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:32.064Z,1509705752.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:32.456Z,1509705752.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:32.471Z,1509705752.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:32.861Z,1509705752.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:32.876Z,1509705752.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:33.257Z,1509705753.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:33.272Z,1509705753.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:33.637Z,1509705753.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:33.667Z,1509705753.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:34.039Z,1509705754.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:34.065Z,1509705754.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:34.457Z,1509705754.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:34.473Z,1509705754.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:34.857Z,1509705754.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:34.873Z,1509705754.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:35.258Z,1509705755.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:35.279Z,1509705755.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:35.640Z,1509705755.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:35.665Z,1509705755.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:36.037Z,1509705756.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:36.066Z,1509705756.066 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:36.067Z,1509705756.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 209
2017-11-03T10:42:36.067Z,1509705756.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:42:36.069Z,1509705756.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:36.069Z,1509705756.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 209
2017-11-03T10:42:36.069Z,1509705756.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:42:36.071Z,1509705756.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:36.071Z,1509705756.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 209
2017-11-03T10:42:36.071Z,1509705756.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:42:36.149Z,1509705756.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:42:36.149Z,1509705756.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:42:36.149Z,1509705756.149 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:42:36.448Z,1509705756.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:36.603Z,1509705756.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:42:36.603Z,1509705756.603 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 209
2017-11-03T10:42:36.604Z,1509705756.604 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:42:36.604Z,1509705756.604 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 209
2017-11-03T10:42:36.604Z,1509705756.604 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:42:36.604Z,1509705756.604 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 209
2017-11-03T10:42:36.861Z,1509705756.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:36.929Z,1509705756.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:42:36.930Z,1509705756.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:42:36.930Z,1509705756.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:42:36.930Z,1509705756.930 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:42:36.931Z,1509705756.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:42:36.931Z,1509705756.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:42:36.931Z,1509705756.931 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:42:36.932Z,1509705756.932 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:42:36.932Z,1509705756.932 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:42:37.246Z,1509705757.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:37.270Z,1509705757.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:42:37.271Z,1509705757.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:37.639Z,1509705757.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:37.670Z,1509705757.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:42:37.671Z,1509705757.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:38.039Z,1509705758.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:38.090Z,1509705758.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:42:38.091Z,1509705758.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:38.457Z,1509705758.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:38.471Z,1509705758.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:42:38.473Z,1509705758.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:38.861Z,1509705758.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:38.914Z,1509705758.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:42:38.915Z,1509705758.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:39.257Z,1509705759.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:39.310Z,1509705759.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:42:39.311Z,1509705759.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:39.637Z,1509705759.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:39.668Z,1509705759.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:42:39.673Z,1509705759.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:40.039Z,1509705760.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:40.069Z,1509705760.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:42:40.070Z,1509705760.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:40.493Z,1509705760.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:40.525Z,1509705760.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-03T10:42:40.526Z,1509705760.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:40.854Z,1509705760.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:40.882Z,1509705760.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:42:40.883Z,1509705760.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:41.249Z,1509705761.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:41.275Z,1509705761.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:42:41.277Z,1509705761.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:41.640Z,1509705761.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:41.654Z,1509705761.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:42:41.655Z,1509705761.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:42.035Z,1509705762.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:42.050Z,1509705762.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:42:42.051Z,1509705762.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:42.449Z,1509705762.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:42.473Z,1509705762.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:42:42.474Z,1509705762.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:42.850Z,1509705762.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:42.872Z,1509705762.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:42:42.873Z,1509705762.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:43.254Z,1509705763.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:43.282Z,1509705763.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:42:43.283Z,1509705763.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:43.636Z,1509705763.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:43.650Z,1509705763.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:42:43.651Z,1509705763.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:44.035Z,1509705764.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:44.054Z,1509705764.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:42:44.055Z,1509705764.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:44.450Z,1509705764.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:44.472Z,1509705764.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:42:44.473Z,1509705764.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:44.849Z,1509705764.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:44.874Z,1509705764.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:42:44.875Z,1509705764.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:45.250Z,1509705765.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:45.272Z,1509705765.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:42:45.273Z,1509705765.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:45.636Z,1509705765.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:45.677Z,1509705765.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:42:45.678Z,1509705765.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:46.035Z,1509705766.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:46.050Z,1509705766.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:42:46.051Z,1509705766.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:46.450Z,1509705766.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:46.472Z,1509705766.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:42:46.473Z,1509705766.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:46.850Z,1509705766.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:46.878Z,1509705766.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:42:46.879Z,1509705766.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:47.250Z,1509705767.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:47.273Z,1509705767.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:42:47.274Z,1509705767.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:47.636Z,1509705767.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:47.674Z,1509705767.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:42:47.675Z,1509705767.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:48.037Z,1509705768.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:48.051Z,1509705768.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:42:48.052Z,1509705768.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:48.450Z,1509705768.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:48.480Z,1509705768.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:42:48.481Z,1509705768.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:48.854Z,1509705768.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:48.877Z,1509705768.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:42:48.878Z,1509705768.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:49.250Z,1509705769.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:49.279Z,1509705769.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:42:49.280Z,1509705769.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:49.636Z,1509705769.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:49.650Z,1509705769.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:42:49.651Z,1509705769.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:50.043Z,1509705770.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:50.082Z,1509705770.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:42:50.083Z,1509705770.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:50.450Z,1509705770.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:50.479Z,1509705770.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:42:50.480Z,1509705770.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:50.849Z,1509705770.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:50.876Z,1509705770.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:42:50.881Z,1509705770.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:51.250Z,1509705771.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:51.280Z,1509705771.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:42:51.281Z,1509705771.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:51.645Z,1509705771.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:51.726Z,1509705771.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-03T10:42:51.727Z,1509705771.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:52.039Z,1509705772.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:52.054Z,1509705772.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:42:52.055Z,1509705772.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:52.454Z,1509705772.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:52.506Z,1509705772.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T10:42:52.507Z,1509705772.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:52.854Z,1509705772.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:52.887Z,1509705772.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T10:42:52.888Z,1509705772.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:53.253Z,1509705773.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:53.306Z,1509705773.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T10:42:53.307Z,1509705773.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:53.640Z,1509705773.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:53.690Z,1509705773.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T10:42:53.691Z,1509705773.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:54.039Z,1509705774.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:54.054Z,1509705774.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T10:42:54.055Z,1509705774.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:54.453Z,1509705774.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:54.468Z,1509705774.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:42:54.489Z,1509705774.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:54.857Z,1509705774.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:54.872Z,1509705774.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T10:42:54.889Z,1509705774.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:55.250Z,1509705775.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:55.264Z,1509705775.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T10:42:55.265Z,1509705775.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:55.647Z,1509705775.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:55.661Z,1509705775.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T10:42:55.662Z,1509705775.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:56.046Z,1509705776.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:56.061Z,1509705776.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-03T10:42:56.062Z,1509705776.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:56.450Z,1509705776.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:56.465Z,1509705776.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:56.853Z,1509705776.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:56.868Z,1509705776.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:57.250Z,1509705777.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:57.265Z,1509705777.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:57.645Z,1509705777.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:57.660Z,1509705777.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:58.046Z,1509705778.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:58.061Z,1509705778.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:58.450Z,1509705778.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:58.465Z,1509705778.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:58.853Z,1509705778.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:58.868Z,1509705778.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:59.249Z,1509705779.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:59.265Z,1509705779.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:42:59.648Z,1509705779.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:42:59.663Z,1509705779.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:00.046Z,1509705780.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:00.061Z,1509705780.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:00.450Z,1509705780.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:00.466Z,1509705780.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:00.850Z,1509705780.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:00.866Z,1509705780.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:01.249Z,1509705781.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:01.265Z,1509705781.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:01.645Z,1509705781.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:01.661Z,1509705781.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:02.047Z,1509705782.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:02.063Z,1509705782.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:02.450Z,1509705782.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:02.466Z,1509705782.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:02.853Z,1509705782.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:02.869Z,1509705782.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:03.251Z,1509705783.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:03.271Z,1509705783.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:03.645Z,1509705783.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:03.661Z,1509705783.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:04.047Z,1509705784.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:04.062Z,1509705784.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:04.451Z,1509705784.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:04.466Z,1509705784.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:04.850Z,1509705784.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:04.871Z,1509705784.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:05.250Z,1509705785.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:05.323Z,1509705785.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:05.647Z,1509705785.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:05.663Z,1509705785.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:06.043Z,1509705786.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:06.058Z,1509705786.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:06.452Z,1509705786.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:06.499Z,1509705786.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:06.854Z,1509705786.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:06.869Z,1509705786.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:07.251Z,1509705787.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:07.295Z,1509705787.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:07.647Z,1509705787.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:07.699Z,1509705787.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:08.046Z,1509705788.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:08.067Z,1509705788.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:08.451Z,1509705788.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:08.466Z,1509705788.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:08.853Z,1509705788.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:08.869Z,1509705788.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:09.252Z,1509705789.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:09.270Z,1509705789.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:09.645Z,1509705789.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:09.659Z,1509705789.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:10.046Z,1509705790.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:10.061Z,1509705790.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:10.452Z,1509705790.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:10.467Z,1509705790.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:10.851Z,1509705790.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:10.866Z,1509705790.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:11.252Z,1509705791.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:11.267Z,1509705791.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:11.647Z,1509705791.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:11.662Z,1509705791.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:12.044Z,1509705792.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:12.058Z,1509705792.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:12.452Z,1509705792.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:12.468Z,1509705792.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:12.854Z,1509705792.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:12.875Z,1509705792.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:13.251Z,1509705793.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:13.265Z,1509705793.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:13.647Z,1509705793.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:13.663Z,1509705793.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:14.046Z,1509705794.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:14.063Z,1509705794.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:14.451Z,1509705794.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:14.467Z,1509705794.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:14.852Z,1509705794.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:14.867Z,1509705794.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:15.252Z,1509705795.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:15.271Z,1509705795.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:15.644Z,1509705795.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:15.658Z,1509705795.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:16.047Z,1509705796.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:16.067Z,1509705796.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:16.452Z,1509705796.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:16.467Z,1509705796.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:16.853Z,1509705796.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:16.874Z,1509705796.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:17.252Z,1509705797.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:17.275Z,1509705797.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:17.648Z,1509705797.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:17.663Z,1509705797.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:18.046Z,1509705798.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:18.061Z,1509705798.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:21.146Z,1509705801.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:21.227Z,1509705801.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:21.373Z,1509705801.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:21.430Z,1509705801.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:21.769Z,1509705801.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:21.799Z,1509705801.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:22.163Z,1509705802.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:22.219Z,1509705802.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:22.557Z,1509705802.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:22.572Z,1509705802.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:22.956Z,1509705802.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:23.002Z,1509705803.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:23.356Z,1509705803.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:23.407Z,1509705803.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:23.769Z,1509705803.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:23.799Z,1509705803.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:24.173Z,1509705804.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:24.202Z,1509705804.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:24.569Z,1509705804.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:24.600Z,1509705804.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:24.956Z,1509705804.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:24.971Z,1509705804.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:25.355Z,1509705805.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:25.370Z,1509705805.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:25.757Z,1509705805.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:25.771Z,1509705805.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:26.156Z,1509705806.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:26.171Z,1509705806.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:26.569Z,1509705806.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:26.600Z,1509705806.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:26.973Z,1509705806.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:26.997Z,1509705806.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:27.369Z,1509705807.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:27.399Z,1509705807.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:27.755Z,1509705807.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:27.770Z,1509705807.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:28.156Z,1509705808.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:28.171Z,1509705808.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:28.556Z,1509705808.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:28.575Z,1509705808.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:28.956Z,1509705808.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:28.978Z,1509705808.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:29.355Z,1509705809.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:29.370Z,1509705809.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:29.761Z,1509705809.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:29.777Z,1509705809.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:30.169Z,1509705810.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:30.199Z,1509705810.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:30.568Z,1509705810.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:30.599Z,1509705810.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:30.956Z,1509705810.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:30.971Z,1509705810.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:31.356Z,1509705811.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:31.378Z,1509705811.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:31.757Z,1509705811.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:31.771Z,1509705811.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:32.156Z,1509705812.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:32.179Z,1509705812.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:32.569Z,1509705812.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:32.584Z,1509705812.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:32.969Z,1509705812.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:33.002Z,1509705813.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:33.369Z,1509705813.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:33.401Z,1509705813.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:33.756Z,1509705813.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:33.770Z,1509705813.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:34.160Z,1509705814.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:34.175Z,1509705814.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:34.560Z,1509705814.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:34.575Z,1509705814.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:34.961Z,1509705814.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:34.975Z,1509705814.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:35.361Z,1509705815.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:35.376Z,1509705815.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:35.762Z,1509705815.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:35.838Z,1509705815.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:36.171Z,1509705816.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:36.190Z,1509705816.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:36.573Z,1509705816.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:36.619Z,1509705816.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:36.957Z,1509705816.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:36.980Z,1509705816.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:37.348Z,1509705817.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:37.395Z,1509705817.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:37.762Z,1509705817.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:37.818Z,1509705817.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:38.149Z,1509705818.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:38.180Z,1509705818.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:38.573Z,1509705818.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:38.588Z,1509705818.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:38.974Z,1509705818.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:38.989Z,1509705818.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:39.369Z,1509705819.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:39.384Z,1509705819.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:39.754Z,1509705819.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:39.779Z,1509705819.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:40.152Z,1509705820.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:40.183Z,1509705820.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:40.549Z,1509705820.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:40.576Z,1509705820.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:40.952Z,1509705820.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:40.987Z,1509705820.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:41.352Z,1509705821.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:41.367Z,1509705821.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:41.769Z,1509705821.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:41.799Z,1509705821.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:42.165Z,1509705822.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:42.190Z,1509705822.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:42.565Z,1509705822.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:42.590Z,1509705822.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:42.952Z,1509705822.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:42.971Z,1509705822.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:43.358Z,1509705823.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:43.391Z,1509705823.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:43.753Z,1509705823.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:43.768Z,1509705823.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:44.159Z,1509705824.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:44.191Z,1509705824.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:44.569Z,1509705824.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:44.590Z,1509705824.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:44.969Z,1509705824.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:44.999Z,1509705824.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:45.370Z,1509705825.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:45.398Z,1509705825.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:45.759Z,1509705825.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:45.791Z,1509705825.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:46.157Z,1509705826.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:46.171Z,1509705826.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:46.559Z,1509705826.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:46.591Z,1509705826.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:46.953Z,1509705826.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:46.967Z,1509705826.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:47.357Z,1509705827.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:47.372Z,1509705827.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:47.769Z,1509705827.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:47.799Z,1509705827.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:48.169Z,1509705828.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:48.198Z,1509705828.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:48.570Z,1509705828.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:48.594Z,1509705828.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:48.953Z,1509705828.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:48.968Z,1509705828.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:49.365Z,1509705829.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:49.388Z,1509705829.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:49.755Z,1509705829.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:49.791Z,1509705829.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:50.154Z,1509705830.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:50.230Z,1509705830.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:50.573Z,1509705830.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:50.603Z,1509705830.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:50.963Z,1509705830.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:51.018Z,1509705831.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:51.367Z,1509705831.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:51.382Z,1509705831.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:51.757Z,1509705831.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:51.804Z,1509705831.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:52.159Z,1509705832.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:52.207Z,1509705832.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:52.560Z,1509705832.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:52.583Z,1509705832.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:52.958Z,1509705832.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:52.993Z,1509705832.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:53.360Z,1509705833.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:53.376Z,1509705833.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:53.762Z,1509705833.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:53.778Z,1509705833.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:54.166Z,1509705834.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:54.180Z,1509705834.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:54.574Z,1509705834.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:54.605Z,1509705834.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:54.959Z,1509705834.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:54.975Z,1509705834.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:55.361Z,1509705835.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:55.383Z,1509705835.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:55.760Z,1509705835.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:55.776Z,1509705835.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:56.159Z,1509705836.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:56.175Z,1509705836.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:56.573Z,1509705836.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:56.602Z,1509705836.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:56.961Z,1509705836.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:56.976Z,1509705836.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:57.373Z,1509705837.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:57.404Z,1509705837.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:57.759Z,1509705837.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:57.774Z,1509705837.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:58.159Z,1509705838.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:58.174Z,1509705838.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:58.560Z,1509705838.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:58.575Z,1509705838.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:58.960Z,1509705838.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:58.975Z,1509705838.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:59.359Z,1509705839.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:59.374Z,1509705839.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:43:59.774Z,1509705839.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:43:59.802Z,1509705839.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:00.165Z,1509705840.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:00.180Z,1509705840.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:00.573Z,1509705840.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:00.602Z,1509705840.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:00.959Z,1509705840.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:00.979Z,1509705840.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:01.359Z,1509705841.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:01.375Z,1509705841.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:01.761Z,1509705841.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:01.776Z,1509705841.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:02.160Z,1509705842.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:02.175Z,1509705842.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:02.565Z,1509705842.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:02.580Z,1509705842.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:02.973Z,1509705842.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:03.003Z,1509705843.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:03.366Z,1509705843.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:03.381Z,1509705843.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:03.759Z,1509705843.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:03.778Z,1509705843.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:04.160Z,1509705844.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:04.222Z,1509705844.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:04.559Z,1509705844.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:04.622Z,1509705844.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:04.962Z,1509705844.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:04.977Z,1509705844.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:05.357Z,1509705845.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:05.414Z,1509705845.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:05.766Z,1509705845.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:05.781Z,1509705845.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:06.165Z,1509705846.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:06.208Z,1509705846.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:06.564Z,1509705846.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:06.615Z,1509705846.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:06.960Z,1509705846.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:06.983Z,1509705846.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:07.360Z,1509705847.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:07.375Z,1509705847.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:07.757Z,1509705847.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:07.773Z,1509705847.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:08.160Z,1509705848.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:08.175Z,1509705848.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:08.565Z,1509705848.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:08.580Z,1509705848.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:08.969Z,1509705848.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:08.984Z,1509705848.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:09.366Z,1509705849.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:09.381Z,1509705849.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:09.760Z,1509705849.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:09.775Z,1509705849.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:10.163Z,1509705850.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:10.178Z,1509705850.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:10.560Z,1509705850.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:10.575Z,1509705850.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:10.962Z,1509705850.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:10.976Z,1509705850.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:11.363Z,1509705851.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:11.378Z,1509705851.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:11.766Z,1509705851.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:11.781Z,1509705851.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:12.165Z,1509705852.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:12.186Z,1509705852.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:12.565Z,1509705852.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:12.580Z,1509705852.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:12.961Z,1509705852.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:12.976Z,1509705852.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:13.360Z,1509705853.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:13.374Z,1509705853.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:13.764Z,1509705853.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:13.779Z,1509705853.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:14.160Z,1509705854.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:14.175Z,1509705854.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:14.568Z,1509705854.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:14.590Z,1509705854.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:14.969Z,1509705854.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:14.985Z,1509705854.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:15.368Z,1509705855.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:15.391Z,1509705855.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:15.760Z,1509705855.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:15.775Z,1509705855.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:16.163Z,1509705856.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:16.179Z,1509705856.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:16.560Z,1509705856.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:16.575Z,1509705856.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:16.961Z,1509705856.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:16.976Z,1509705856.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:17.363Z,1509705857.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:17.379Z,1509705857.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:17.768Z,1509705857.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:17.783Z,1509705857.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:17.793Z,1509705857.793 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-03T10:44:17.794Z,1509705857.794 [Default:CheckIn:C.Wait] Stopped
2017-11-03T10:44:17.794Z,1509705857.794 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-03T10:44:17.794Z,1509705857.794 [Default:CheckIn:D] Running Loop=1
2017-11-03T10:44:18.173Z,1509705858.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:18.188Z,1509705858.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:18.192Z,1509705858.192 [Default:CheckIn:D] Stopped
2017-11-03T10:44:18.192Z,1509705858.192 [Default:CheckIn:E] Running Loop=1
2017-11-03T10:44:21.246Z,1509705861.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:21.331Z,1509705861.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:21.338Z,1509705861.338 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 629.177083 min 
2017-11-03T10:44:21.339Z,1509705861.339 [Default:CheckIn:E] Stopped
2017-11-03T10:44:21.339Z,1509705861.339 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-03T10:44:21.339Z,1509705861.339 [Default:CheckIn] Stopped
2017-11-03T10:44:21.339Z,1509705861.339 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-03T10:44:21.339Z,1509705861.339 [Default:CheckIn](INFO): Running loop #62
2017-11-03T10:44:21.339Z,1509705861.339 [Default:CheckIn] Running Loop=62
2017-11-03T10:44:21.339Z,1509705861.339 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-03T10:44:21.340Z,1509705861.340 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-03T10:44:21.454Z,1509705861.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:21.495Z,1509705861.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:21.871Z,1509705861.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:21.886Z,1509705861.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:22.267Z,1509705862.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:22.323Z,1509705862.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:22.680Z,1509705862.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:22.702Z,1509705862.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:23.079Z,1509705863.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:23.130Z,1509705863.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:23.481Z,1509705863.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:23.531Z,1509705863.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:23.870Z,1509705863.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:23.887Z,1509705863.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:24.268Z,1509705864.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:24.283Z,1509705864.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:24.671Z,1509705864.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:24.687Z,1509705864.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:25.067Z,1509705865.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:25.083Z,1509705865.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:25.480Z,1509705865.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:25.498Z,1509705865.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:25.880Z,1509705865.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:25.895Z,1509705865.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:26.280Z,1509705866.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:26.295Z,1509705866.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:26.667Z,1509705866.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:26.683Z,1509705866.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:27.064Z,1509705867.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:27.082Z,1509705867.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:27.470Z,1509705867.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:27.491Z,1509705867.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:27.867Z,1509705867.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:27.886Z,1509705867.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:28.271Z,1509705868.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:28.286Z,1509705868.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:28.679Z,1509705868.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:28.699Z,1509705868.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:29.083Z,1509705869.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:29.104Z,1509705869.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:29.477Z,1509705869.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:29.492Z,1509705869.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:29.870Z,1509705869.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:29.891Z,1509705869.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:30.267Z,1509705870.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:30.283Z,1509705870.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:30.671Z,1509705870.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:30.687Z,1509705870.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:31.068Z,1509705871.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:31.084Z,1509705871.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:31.480Z,1509705871.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:31.495Z,1509705871.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:31.880Z,1509705871.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:31.895Z,1509705871.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:32.280Z,1509705872.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:32.295Z,1509705872.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:32.668Z,1509705872.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:32.683Z,1509705872.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:33.071Z,1509705873.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:33.086Z,1509705873.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:33.470Z,1509705873.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:33.491Z,1509705873.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:33.868Z,1509705873.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:33.883Z,1509705873.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:34.271Z,1509705874.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:34.286Z,1509705874.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:34.680Z,1509705874.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:34.695Z,1509705874.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:35.080Z,1509705875.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:35.095Z,1509705875.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:35.480Z,1509705875.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:35.495Z,1509705875.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:35.870Z,1509705875.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:35.939Z,1509705875.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:36.269Z,1509705876.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:36.287Z,1509705876.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:36.672Z,1509705876.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:36.727Z,1509705876.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:37.070Z,1509705877.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:37.091Z,1509705877.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:37.481Z,1509705877.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:37.538Z,1509705877.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:37.885Z,1509705877.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:37.935Z,1509705877.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:38.278Z,1509705878.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:38.293Z,1509705878.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:38.669Z,1509705878.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:38.689Z,1509705878.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:39.073Z,1509705879.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:39.088Z,1509705879.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:39.470Z,1509705879.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:39.485Z,1509705879.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:39.869Z,1509705879.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:39.890Z,1509705879.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:40.257Z,1509705880.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:40.293Z,1509705880.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:40.679Z,1509705880.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:40.694Z,1509705880.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:41.082Z,1509705881.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:41.101Z,1509705881.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:41.481Z,1509705881.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:41.496Z,1509705881.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:41.857Z,1509705881.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:41.892Z,1509705881.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:42.261Z,1509705882.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:42.296Z,1509705882.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:42.664Z,1509705882.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:42.693Z,1509705882.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:43.063Z,1509705883.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:43.090Z,1509705883.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:43.482Z,1509705883.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:43.498Z,1509705883.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:43.878Z,1509705883.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:43.909Z,1509705883.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:44.269Z,1509705884.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:44.301Z,1509705884.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:44.659Z,1509705884.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:44.675Z,1509705884.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:45.059Z,1509705885.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:45.075Z,1509705885.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:45.459Z,1509705885.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:45.475Z,1509705885.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:45.861Z,1509705885.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:45.876Z,1509705885.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:46.259Z,1509705886.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:46.275Z,1509705886.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:46.673Z,1509705886.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:46.705Z,1509705886.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:47.073Z,1509705887.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:47.104Z,1509705887.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:47.473Z,1509705887.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:47.508Z,1509705887.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:47.860Z,1509705887.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:47.875Z,1509705887.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:48.264Z,1509705888.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:48.279Z,1509705888.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:48.661Z,1509705888.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:48.676Z,1509705888.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:49.060Z,1509705889.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:49.075Z,1509705889.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:49.478Z,1509705889.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:49.508Z,1509705889.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:49.881Z,1509705889.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:49.982Z,1509705889.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:50.270Z,1509705890.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:50.306Z,1509705890.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:50.663Z,1509705890.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:50.715Z,1509705890.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:51.064Z,1509705891.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:51.079Z,1509705891.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:51.463Z,1509705891.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:51.511Z,1509705891.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:51.864Z,1509705891.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:51.915Z,1509705891.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:52.263Z,1509705892.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:52.278Z,1509705892.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:52.677Z,1509705892.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:52.713Z,1509705892.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:53.077Z,1509705893.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:53.113Z,1509705893.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:53.476Z,1509705893.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:53.491Z,1509705893.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:53.863Z,1509705893.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:53.879Z,1509705893.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:54.264Z,1509705894.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:54.279Z,1509705894.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:54.664Z,1509705894.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:54.679Z,1509705894.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:55.067Z,1509705895.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:55.082Z,1509705895.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:55.477Z,1509705895.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:55.512Z,1509705895.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:55.877Z,1509705895.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:55.892Z,1509705895.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:56.277Z,1509705896.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:56.309Z,1509705896.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:56.664Z,1509705896.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:56.679Z,1509705896.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:57.063Z,1509705897.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:57.079Z,1509705897.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:57.463Z,1509705897.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:57.479Z,1509705897.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:57.864Z,1509705897.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:57.879Z,1509705897.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:58.263Z,1509705898.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:58.278Z,1509705898.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:58.669Z,1509705898.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:58.685Z,1509705898.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:59.079Z,1509705899.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:59.112Z,1509705899.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:59.477Z,1509705899.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:59.508Z,1509705899.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:44:59.864Z,1509705899.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:44:59.879Z,1509705899.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:00.264Z,1509705900.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:00.279Z,1509705900.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:00.664Z,1509705900.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:00.679Z,1509705900.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:01.064Z,1509705901.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:01.079Z,1509705901.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:01.482Z,1509705901.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:01.510Z,1509705901.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:01.881Z,1509705901.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:01.911Z,1509705901.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:02.282Z,1509705902.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:02.310Z,1509705902.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:02.664Z,1509705902.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:02.679Z,1509705902.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:03.068Z,1509705903.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:03.083Z,1509705903.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:03.464Z,1509705903.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:03.479Z,1509705903.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:03.864Z,1509705903.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:03.939Z,1509705903.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:04.264Z,1509705904.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:04.279Z,1509705904.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:04.681Z,1509705904.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:04.735Z,1509705904.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:05.074Z,1509705905.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:05.089Z,1509705905.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:05.469Z,1509705905.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:05.519Z,1509705905.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:05.868Z,1509705905.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:05.919Z,1509705905.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:06.268Z,1509705906.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:06.283Z,1509705906.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:06.668Z,1509705906.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:06.683Z,1509705906.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:07.068Z,1509705907.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:07.083Z,1509705907.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:07.474Z,1509705907.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:07.489Z,1509705907.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:07.881Z,1509705907.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:07.914Z,1509705907.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:08.281Z,1509705908.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:08.312Z,1509705908.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:08.667Z,1509705908.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:08.682Z,1509705908.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:09.068Z,1509705909.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:09.083Z,1509705909.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:09.464Z,1509705909.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:09.479Z,1509705909.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:09.868Z,1509705909.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:09.883Z,1509705909.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:10.264Z,1509705910.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:10.279Z,1509705910.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:10.669Z,1509705910.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:10.685Z,1509705910.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:11.074Z,1509705911.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:11.089Z,1509705911.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:11.469Z,1509705911.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:11.484Z,1509705911.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:11.867Z,1509705911.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:11.883Z,1509705911.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:12.267Z,1509705912.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:12.282Z,1509705912.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:12.668Z,1509705912.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:12.683Z,1509705912.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:13.067Z,1509705913.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:13.083Z,1509705913.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:13.474Z,1509705913.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:13.489Z,1509705913.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:13.881Z,1509705913.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:13.912Z,1509705913.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:14.281Z,1509705914.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:14.313Z,1509705914.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:14.667Z,1509705914.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:14.687Z,1509705914.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:15.069Z,1509705915.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:15.084Z,1509705915.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:15.470Z,1509705915.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:15.485Z,1509705915.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:15.864Z,1509705915.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:15.879Z,1509705915.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:16.269Z,1509705916.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:16.284Z,1509705916.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:16.681Z,1509705916.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:16.713Z,1509705916.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:17.074Z,1509705917.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:17.089Z,1509705917.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:17.470Z,1509705917.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:17.485Z,1509705917.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:17.869Z,1509705917.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:17.943Z,1509705917.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:18.263Z,1509705918.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:18.291Z,1509705918.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:21.342Z,1509705921.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:21.399Z,1509705921.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:21.563Z,1509705921.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:21.588Z,1509705921.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:21.969Z,1509705921.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:22.026Z,1509705922.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:22.368Z,1509705922.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:22.423Z,1509705922.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:22.769Z,1509705922.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:22.787Z,1509705922.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:23.148Z,1509705923.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:23.181Z,1509705923.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:23.550Z,1509705923.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:23.582Z,1509705923.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:23.951Z,1509705923.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:23.981Z,1509705923.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:24.348Z,1509705924.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:24.385Z,1509705924.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:24.760Z,1509705924.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:24.790Z,1509705924.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:25.173Z,1509705925.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:25.207Z,1509705925.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:25.562Z,1509705925.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:25.596Z,1509705925.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:25.951Z,1509705925.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:25.983Z,1509705925.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:26.350Z,1509705926.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:26.368Z,1509705926.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:26.750Z,1509705926.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:26.765Z,1509705926.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:27.156Z,1509705927.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:27.171Z,1509705927.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:27.559Z,1509705927.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:27.596Z,1509705927.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:27.968Z,1509705927.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:27.999Z,1509705927.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:28.359Z,1509705928.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:28.401Z,1509705928.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:28.751Z,1509705928.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:28.768Z,1509705928.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:29.151Z,1509705929.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:29.168Z,1509705929.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:29.551Z,1509705929.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:29.573Z,1509705929.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:29.952Z,1509705929.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:29.972Z,1509705929.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:30.351Z,1509705930.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:30.366Z,1509705930.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:30.766Z,1509705930.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:30.801Z,1509705930.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:31.167Z,1509705931.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:31.200Z,1509705931.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:31.566Z,1509705931.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:31.605Z,1509705931.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:31.951Z,1509705931.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:31.967Z,1509705931.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:32.356Z,1509705932.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:32.371Z,1509705932.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:32.755Z,1509705932.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:32.774Z,1509705932.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:33.155Z,1509705933.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:33.171Z,1509705933.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:33.569Z,1509705933.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:33.603Z,1509705933.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:33.961Z,1509705933.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:33.985Z,1509705933.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:34.362Z,1509705934.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:34.430Z,1509705934.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:34.753Z,1509705934.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:34.811Z,1509705934.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:35.158Z,1509705935.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:35.172Z,1509705935.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:35.544Z,1509705935.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:35.608Z,1509705935.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:35.959Z,1509705935.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:35.977Z,1509705935.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:36.355Z,1509705936.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:36.405Z,1509705936.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:36.768Z,1509705936.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:36.819Z,1509705936.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:37.164Z,1509705937.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:37.183Z,1509705937.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:37.184Z,1509705937.184 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 210
2017-11-03T10:45:37.184Z,1509705937.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:45:37.186Z,1509705937.186 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:37.186Z,1509705937.186 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 210
2017-11-03T10:45:37.186Z,1509705937.186 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:45:37.188Z,1509705937.188 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:37.188Z,1509705937.188 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 210
2017-11-03T10:45:37.188Z,1509705937.188 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:45:37.277Z,1509705937.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:45:37.277Z,1509705937.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:45:37.277Z,1509705937.277 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:45:37.560Z,1509705937.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:37.659Z,1509705937.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:45:37.659Z,1509705937.659 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 210
2017-11-03T10:45:37.660Z,1509705937.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:45:37.660Z,1509705937.660 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 210
2017-11-03T10:45:37.660Z,1509705937.660 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:45:37.660Z,1509705937.660 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 210
2017-11-03T10:45:37.943Z,1509705937.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:37.973Z,1509705937.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:45:37.974Z,1509705937.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:45:37.974Z,1509705937.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:45:37.974Z,1509705937.974 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:45:37.975Z,1509705937.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:45:37.975Z,1509705937.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:45:37.975Z,1509705937.975 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:45:37.976Z,1509705937.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:45:37.976Z,1509705937.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:45:38.342Z,1509705938.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:38.373Z,1509705938.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:45:38.374Z,1509705938.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:38.749Z,1509705938.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:38.774Z,1509705938.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:45:38.776Z,1509705938.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:39.150Z,1509705939.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:39.180Z,1509705939.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:45:39.181Z,1509705939.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:39.562Z,1509705939.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:39.582Z,1509705939.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:45:39.583Z,1509705939.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:39.964Z,1509705939.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:39.979Z,1509705939.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:45:39.980Z,1509705939.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:40.365Z,1509705940.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:40.384Z,1509705940.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:45:40.385Z,1509705940.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:40.744Z,1509705940.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:40.778Z,1509705940.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:45:40.779Z,1509705940.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:41.148Z,1509705941.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:41.176Z,1509705941.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:45:41.177Z,1509705941.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:41.544Z,1509705941.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:41.571Z,1509705941.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:45:41.572Z,1509705941.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:41.951Z,1509705941.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:41.985Z,1509705941.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:45:41.986Z,1509705941.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:42.344Z,1509705942.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:42.358Z,1509705942.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:45:42.359Z,1509705942.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:42.760Z,1509705942.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:42.786Z,1509705942.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:45:42.787Z,1509705942.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:43.173Z,1509705943.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:43.191Z,1509705943.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:45:43.192Z,1509705943.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:43.561Z,1509705943.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:43.594Z,1509705943.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:45:43.595Z,1509705943.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:43.950Z,1509705943.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:43.983Z,1509705943.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:45:43.983Z,1509705943.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:44.355Z,1509705944.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:44.387Z,1509705944.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:45:44.388Z,1509705944.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:44.749Z,1509705944.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:44.791Z,1509705944.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:45:44.797Z,1509705944.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:45.148Z,1509705945.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:45.163Z,1509705945.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:45:45.164Z,1509705945.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:45.562Z,1509705945.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:45.590Z,1509705945.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:45:45.591Z,1509705945.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:45.969Z,1509705945.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:45.992Z,1509705945.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:45:45.994Z,1509705945.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:46.361Z,1509705946.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:46.395Z,1509705946.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:45:46.396Z,1509705946.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:46.747Z,1509705946.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:46.762Z,1509705946.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:45:46.763Z,1509705946.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:47.147Z,1509705947.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:47.161Z,1509705947.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:45:47.162Z,1509705947.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:47.551Z,1509705947.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:47.566Z,1509705947.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:45:47.567Z,1509705947.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:47.956Z,1509705947.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:47.970Z,1509705947.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:45:47.971Z,1509705947.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:48.351Z,1509705948.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:48.365Z,1509705948.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:45:48.366Z,1509705948.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:48.767Z,1509705948.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:48.796Z,1509705948.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:45:48.797Z,1509705948.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:49.166Z,1509705949.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:49.262Z,1509705949.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-03T10:45:49.265Z,1509705949.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:49.561Z,1509705949.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:49.582Z,1509705949.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:45:49.584Z,1509705949.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:49.957Z,1509705949.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:50.006Z,1509705950.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:45:50.007Z,1509705950.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:50.352Z,1509705950.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:50.370Z,1509705950.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:45:50.371Z,1509705950.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:50.758Z,1509705950.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:50.803Z,1509705950.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:45:50.804Z,1509705950.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:51.156Z,1509705951.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:51.209Z,1509705951.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:45:51.210Z,1509705951.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:51.559Z,1509705951.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:51.582Z,1509705951.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:45:51.583Z,1509705951.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:51.967Z,1509705951.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:51.983Z,1509705951.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-03T10:45:51.984Z,1509705951.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:52.362Z,1509705952.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:52.404Z,1509705952.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:45:52.405Z,1509705952.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:52.758Z,1509705952.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:52.773Z,1509705952.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T10:45:52.774Z,1509705952.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:53.154Z,1509705953.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:53.176Z,1509705953.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:45:53.177Z,1509705953.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:53.558Z,1509705953.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:53.576Z,1509705953.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T10:45:53.577Z,1509705953.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:53.952Z,1509705953.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:53.967Z,1509705953.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T10:45:53.968Z,1509705953.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:54.392Z,1509705954.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:54.430Z,1509705954.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T10:45:54.431Z,1509705954.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:54.812Z,1509705954.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:54.826Z,1509705954.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T10:45:54.827Z,1509705954.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:55.167Z,1509705955.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:55.183Z,1509705955.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T10:45:55.184Z,1509705955.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:55.567Z,1509705955.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:55.596Z,1509705955.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:45:55.615Z,1509705955.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:55.958Z,1509705955.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:55.988Z,1509705955.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T10:45:55.993Z,1509705955.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:56.349Z,1509705956.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:56.387Z,1509705956.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T10:45:56.388Z,1509705956.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:56.749Z,1509705956.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:56.791Z,1509705956.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T10:45:56.792Z,1509705956.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:57.149Z,1509705957.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:57.186Z,1509705957.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:57.567Z,1509705957.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:57.598Z,1509705957.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:57.994Z,1509705957.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:58.031Z,1509705958.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:58.377Z,1509705958.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:58.392Z,1509705958.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:58.748Z,1509705958.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:58.842Z,1509705958.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:59.155Z,1509705959.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:59.227Z,1509705959.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:59.554Z,1509705959.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:59.580Z,1509705959.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:45:59.956Z,1509705959.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:45:59.982Z,1509705959.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:00.355Z,1509705960.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:00.383Z,1509705960.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:00.769Z,1509705960.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:00.794Z,1509705960.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:01.170Z,1509705961.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:01.218Z,1509705961.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:01.569Z,1509705961.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:01.621Z,1509705961.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:01.948Z,1509705961.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:02.012Z,1509705962.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:02.357Z,1509705962.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:02.393Z,1509705962.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:02.749Z,1509705962.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:02.843Z,1509705962.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:03.149Z,1509705963.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:03.239Z,1509705963.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:03.568Z,1509705963.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:03.616Z,1509705963.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:03.972Z,1509705963.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:04.035Z,1509705964.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:04.369Z,1509705964.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:04.395Z,1509705964.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:04.748Z,1509705964.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:04.822Z,1509705964.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:05.148Z,1509705965.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:05.205Z,1509705965.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:05.549Z,1509705965.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:05.594Z,1509705965.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:05.951Z,1509705965.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:05.997Z,1509705965.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:06.350Z,1509705966.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:06.406Z,1509705966.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:06.762Z,1509705966.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:06.805Z,1509705966.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:07.190Z,1509705967.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:07.231Z,1509705967.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:07.583Z,1509705967.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:07.638Z,1509705967.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:07.948Z,1509705967.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:08.010Z,1509705968.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:08.348Z,1509705968.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:08.397Z,1509705968.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:08.749Z,1509705968.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:08.808Z,1509705968.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:09.148Z,1509705969.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:09.210Z,1509705969.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:09.559Z,1509705969.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:09.603Z,1509705969.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:09.963Z,1509705969.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:10.008Z,1509705970.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:10.375Z,1509705970.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:10.410Z,1509705970.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:10.747Z,1509705970.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:10.771Z,1509705970.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:11.209Z,1509705971.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:11.265Z,1509705971.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:11.544Z,1509705971.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:11.587Z,1509705971.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:11.957Z,1509705971.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:11.972Z,1509705971.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:12.348Z,1509705972.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:12.374Z,1509705972.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:12.772Z,1509705972.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:12.787Z,1509705972.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:13.169Z,1509705973.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:13.213Z,1509705973.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:13.569Z,1509705973.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:13.585Z,1509705973.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:13.958Z,1509705973.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:13.975Z,1509705973.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:14.356Z,1509705974.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:14.376Z,1509705974.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:14.757Z,1509705974.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:14.778Z,1509705974.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:15.159Z,1509705975.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:15.175Z,1509705975.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:15.568Z,1509705975.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:15.587Z,1509705975.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:15.972Z,1509705975.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:15.987Z,1509705975.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:16.369Z,1509705976.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:16.413Z,1509705976.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:16.756Z,1509705976.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:16.772Z,1509705976.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:17.156Z,1509705977.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:17.229Z,1509705977.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:17.544Z,1509705977.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:17.607Z,1509705977.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:17.944Z,1509705977.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:17.979Z,1509705977.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:18.347Z,1509705978.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:18.372Z,1509705978.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:21.521Z,1509705981.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:21.625Z,1509705981.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:21.762Z,1509705981.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:21.798Z,1509705981.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:22.160Z,1509705982.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:22.199Z,1509705982.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:22.547Z,1509705982.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:22.595Z,1509705982.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:22.940Z,1509705982.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:22.955Z,1509705982.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:23.348Z,1509705983.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:23.363Z,1509705983.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:23.758Z,1509705983.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:23.773Z,1509705983.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:24.158Z,1509705984.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:24.210Z,1509705984.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:24.554Z,1509705984.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:24.569Z,1509705984.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:24.944Z,1509705984.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:24.959Z,1509705984.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:25.343Z,1509705985.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:25.359Z,1509705985.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:25.743Z,1509705985.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:25.760Z,1509705985.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:26.142Z,1509705986.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:26.159Z,1509705986.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:26.554Z,1509705986.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:26.571Z,1509705986.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:26.949Z,1509705986.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:26.966Z,1509705986.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:27.349Z,1509705987.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:27.367Z,1509705987.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:27.743Z,1509705987.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:27.763Z,1509705987.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:28.142Z,1509705988.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:28.157Z,1509705988.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:28.537Z,1509705988.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:28.552Z,1509705988.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:28.943Z,1509705988.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:28.959Z,1509705988.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:29.363Z,1509705989.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:29.405Z,1509705989.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:29.750Z,1509705989.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:29.769Z,1509705989.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:30.162Z,1509705990.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:30.191Z,1509705990.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:30.564Z,1509705990.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:30.582Z,1509705990.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:30.952Z,1509705990.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:30.967Z,1509705990.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:31.350Z,1509705991.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:31.368Z,1509705991.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:31.751Z,1509705991.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:31.766Z,1509705991.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:32.151Z,1509705992.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:32.166Z,1509705992.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:32.561Z,1509705992.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:32.583Z,1509705992.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:32.963Z,1509705992.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:32.982Z,1509705992.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:33.357Z,1509705993.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:33.373Z,1509705993.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:33.751Z,1509705993.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:33.771Z,1509705993.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:34.150Z,1509705994.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:34.158Z,1509705994.158 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T10:46:34.158Z,1509705994.158 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:46:34.158Z,1509705994.158 [BPC1](ERROR): Data Fault
2017-11-03T10:46:34.166Z,1509705994.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:34.245Z,1509705994.245 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:46:34.539Z,1509705994.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:34.571Z,1509705994.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:34.943Z,1509705994.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:34.974Z,1509705994.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:35.336Z,1509705995.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:35.351Z,1509705995.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:35.458Z,1509705995.458 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:46:35.458Z,1509705995.458 [BPC1] No Fault, FailCount= 1
2017-11-03T10:46:35.749Z,1509705995.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:35.831Z,1509705995.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:36.164Z,1509705996.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:36.179Z,1509705996.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:36.562Z,1509705996.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:36.614Z,1509705996.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:36.943Z,1509705996.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:36.975Z,1509705996.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:37.343Z,1509705997.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:37.374Z,1509705997.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:37.743Z,1509705997.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:37.773Z,1509705997.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:38.142Z,1509705998.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:38.175Z,1509705998.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:38.562Z,1509705998.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:38.583Z,1509705998.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:38.965Z,1509705998.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:38.986Z,1509705998.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:39.362Z,1509705999.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:39.378Z,1509705999.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:39.742Z,1509705999.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:39.774Z,1509705999.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:40.142Z,1509706000.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:40.173Z,1509706000.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:40.542Z,1509706000.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:40.574Z,1509706000.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:40.943Z,1509706000.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:40.974Z,1509706000.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:41.342Z,1509706001.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:41.417Z,1509706001.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:41.762Z,1509706001.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:41.778Z,1509706001.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:42.165Z,1509706002.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:42.180Z,1509706002.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:42.561Z,1509706002.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:42.576Z,1509706002.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:42.942Z,1509706002.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:42.974Z,1509706002.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:43.342Z,1509706003.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:43.374Z,1509706003.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:43.743Z,1509706003.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:43.773Z,1509706003.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:44.143Z,1509706004.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:44.174Z,1509706004.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:44.549Z,1509706004.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:44.583Z,1509706004.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:44.965Z,1509706004.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:44.979Z,1509706004.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:45.363Z,1509706005.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:45.383Z,1509706005.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:45.737Z,1509706005.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:45.752Z,1509706005.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:46.143Z,1509706006.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:46.177Z,1509706006.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:46.542Z,1509706006.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:46.581Z,1509706006.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:46.940Z,1509706006.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:46.955Z,1509706006.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:47.339Z,1509706007.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:47.354Z,1509706007.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:47.764Z,1509706007.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:47.779Z,1509706007.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:48.161Z,1509706008.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:48.183Z,1509706008.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:48.554Z,1509706008.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:48.603Z,1509706008.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:48.940Z,1509706008.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:48.983Z,1509706008.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:49.337Z,1509706009.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:49.352Z,1509706009.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:49.743Z,1509706009.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:49.758Z,1509706009.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:50.143Z,1509706010.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:50.202Z,1509706010.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:50.557Z,1509706010.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:50.587Z,1509706010.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:50.957Z,1509706010.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:51.022Z,1509706011.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:51.357Z,1509706011.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:51.381Z,1509706011.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:51.737Z,1509706011.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:51.790Z,1509706011.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:52.143Z,1509706012.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:52.179Z,1509706012.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:52.543Z,1509706012.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:52.558Z,1509706012.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:52.943Z,1509706012.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:52.958Z,1509706012.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:53.340Z,1509706013.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:53.355Z,1509706013.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:53.753Z,1509706013.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:53.779Z,1509706013.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:54.167Z,1509706014.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:54.187Z,1509706014.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:54.553Z,1509706014.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:54.578Z,1509706014.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:54.940Z,1509706014.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:54.955Z,1509706014.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:55.346Z,1509706015.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:55.379Z,1509706015.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:55.746Z,1509706015.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:55.769Z,1509706015.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:56.145Z,1509706016.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:56.173Z,1509706016.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:56.557Z,1509706016.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:56.587Z,1509706016.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:56.957Z,1509706016.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:56.986Z,1509706016.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:57.353Z,1509706017.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:57.384Z,1509706017.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:57.746Z,1509706017.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:57.769Z,1509706017.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:58.146Z,1509706018.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:58.169Z,1509706018.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:58.542Z,1509706018.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:58.557Z,1509706018.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:58.946Z,1509706018.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:58.970Z,1509706018.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:59.346Z,1509706019.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:59.373Z,1509706019.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:46:59.753Z,1509706019.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:46:59.779Z,1509706019.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:00.157Z,1509706020.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:00.187Z,1509706020.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:00.557Z,1509706020.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:00.587Z,1509706020.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:00.946Z,1509706020.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:00.973Z,1509706020.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:01.344Z,1509706021.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:01.360Z,1509706021.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:01.746Z,1509706021.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:01.777Z,1509706021.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:02.143Z,1509706022.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:02.158Z,1509706022.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:02.555Z,1509706022.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:02.585Z,1509706022.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:02.955Z,1509706022.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:02.985Z,1509706022.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:03.362Z,1509706023.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:03.388Z,1509706023.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:03.741Z,1509706023.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:03.818Z,1509706023.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:04.151Z,1509706024.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:04.168Z,1509706024.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:04.551Z,1509706024.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:04.599Z,1509706024.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:04.951Z,1509706024.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:04.967Z,1509706024.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:05.351Z,1509706025.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:05.400Z,1509706025.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:05.754Z,1509706025.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:05.811Z,1509706025.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:06.158Z,1509706026.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:06.174Z,1509706026.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:06.554Z,1509706026.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:06.569Z,1509706026.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:06.945Z,1509706026.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:06.960Z,1509706026.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:07.350Z,1509706027.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:07.365Z,1509706027.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:07.750Z,1509706027.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:07.771Z,1509706027.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:08.151Z,1509706028.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:08.166Z,1509706028.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:08.552Z,1509706028.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:08.567Z,1509706028.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:08.957Z,1509706028.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:08.973Z,1509706028.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:09.353Z,1509706029.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:09.375Z,1509706029.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:09.750Z,1509706029.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:09.765Z,1509706029.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:10.150Z,1509706030.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:10.165Z,1509706030.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:10.545Z,1509706030.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:10.560Z,1509706030.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:10.950Z,1509706030.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:10.965Z,1509706030.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:11.350Z,1509706031.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:11.365Z,1509706031.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:11.752Z,1509706031.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:11.767Z,1509706031.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:12.151Z,1509706032.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:12.171Z,1509706032.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:12.552Z,1509706032.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:12.567Z,1509706032.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:12.950Z,1509706032.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:12.965Z,1509706032.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:13.345Z,1509706033.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:13.360Z,1509706033.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:13.750Z,1509706033.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:13.771Z,1509706033.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:14.151Z,1509706034.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:14.166Z,1509706034.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:14.554Z,1509706034.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:14.569Z,1509706034.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:14.958Z,1509706034.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:14.973Z,1509706034.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:15.353Z,1509706035.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:15.369Z,1509706035.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:15.750Z,1509706035.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:15.765Z,1509706035.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:16.150Z,1509706036.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:16.166Z,1509706036.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:16.545Z,1509706036.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:16.561Z,1509706036.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:16.949Z,1509706036.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:16.971Z,1509706036.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:17.350Z,1509706037.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:17.365Z,1509706037.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:17.753Z,1509706037.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:17.769Z,1509706037.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:18.152Z,1509706038.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:18.244Z,1509706038.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:18.558Z,1509706038.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:18.573Z,1509706038.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:21.629Z,1509706041.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:21.687Z,1509706041.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:21.832Z,1509706041.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:21.879Z,1509706041.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:22.253Z,1509706042.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:22.310Z,1509706042.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:22.658Z,1509706042.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:22.714Z,1509706042.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:23.053Z,1509706043.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:23.068Z,1509706043.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:23.433Z,1509706043.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:23.462Z,1509706043.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:23.836Z,1509706043.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:23.862Z,1509706043.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:24.230Z,1509706044.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:24.256Z,1509706044.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:24.653Z,1509706044.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:24.668Z,1509706044.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:25.049Z,1509706045.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:25.064Z,1509706045.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:25.445Z,1509706045.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:25.460Z,1509706045.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:25.832Z,1509706045.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:25.862Z,1509706045.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:26.234Z,1509706046.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:26.261Z,1509706046.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:26.635Z,1509706046.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:26.661Z,1509706046.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:27.035Z,1509706047.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:27.060Z,1509706047.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:27.453Z,1509706047.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:27.468Z,1509706047.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:27.856Z,1509706047.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:27.871Z,1509706047.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:28.253Z,1509706048.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:28.268Z,1509706048.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:28.635Z,1509706048.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:28.661Z,1509706048.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:29.028Z,1509706049.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:29.063Z,1509706049.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:29.453Z,1509706049.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:29.468Z,1509706049.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:29.853Z,1509706049.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:29.868Z,1509706049.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:30.253Z,1509706050.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:30.268Z,1509706050.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:30.633Z,1509706050.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:30.658Z,1509706050.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:31.035Z,1509706051.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:31.067Z,1509706051.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:31.449Z,1509706051.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:31.464Z,1509706051.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:31.853Z,1509706051.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:31.868Z,1509706051.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:32.253Z,1509706052.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:32.268Z,1509706052.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:32.635Z,1509706052.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:32.660Z,1509706052.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:33.033Z,1509706053.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:33.058Z,1509706053.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:33.453Z,1509706053.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:33.468Z,1509706053.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:33.856Z,1509706053.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:33.871Z,1509706053.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:34.253Z,1509706054.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:34.268Z,1509706054.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:34.635Z,1509706054.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:34.719Z,1509706054.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:35.035Z,1509706055.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:35.067Z,1509706055.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:35.453Z,1509706055.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:35.507Z,1509706055.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:35.850Z,1509706055.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:35.865Z,1509706055.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:36.249Z,1509706056.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:36.308Z,1509706056.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:36.633Z,1509706056.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:36.691Z,1509706056.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:37.035Z,1509706057.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:37.061Z,1509706057.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:37.453Z,1509706057.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:37.468Z,1509706057.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:37.852Z,1509706057.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:37.867Z,1509706057.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:38.253Z,1509706058.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:38.268Z,1509706058.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:38.635Z,1509706058.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:38.661Z,1509706058.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:39.033Z,1509706059.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:39.064Z,1509706059.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:39.454Z,1509706059.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:39.469Z,1509706059.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:39.857Z,1509706059.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:39.872Z,1509706059.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:40.253Z,1509706060.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:40.268Z,1509706060.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:40.635Z,1509706060.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:40.666Z,1509706060.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:41.028Z,1509706061.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:41.043Z,1509706061.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:41.445Z,1509706061.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:41.475Z,1509706061.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:41.841Z,1509706061.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:41.869Z,1509706061.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:42.241Z,1509706062.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:42.267Z,1509706062.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:42.633Z,1509706062.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:42.648Z,1509706062.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:43.032Z,1509706063.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:43.047Z,1509706063.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:43.441Z,1509706063.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:43.473Z,1509706063.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:43.849Z,1509706063.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:43.873Z,1509706063.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:44.245Z,1509706064.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:44.277Z,1509706064.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:44.639Z,1509706064.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:44.655Z,1509706064.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:45.032Z,1509706065.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:45.047Z,1509706065.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:45.445Z,1509706065.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:45.476Z,1509706065.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:45.853Z,1509706065.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:45.877Z,1509706065.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:46.245Z,1509706066.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:46.277Z,1509706066.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:46.639Z,1509706066.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:46.655Z,1509706066.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:47.033Z,1509706067.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:47.049Z,1509706067.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:47.449Z,1509706067.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:47.473Z,1509706067.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:47.853Z,1509706067.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:47.871Z,1509706067.871 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-03T10:47:47.871Z,1509706067.871 [BPC1] Data Fault, FailCount= 1
2017-11-03T10:47:47.871Z,1509706067.871 [BPC1](ERROR): Data Fault
2017-11-03T10:47:47.879Z,1509706067.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:47.981Z,1509706067.981 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-03T10:47:48.249Z,1509706068.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:48.275Z,1509706068.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:48.634Z,1509706068.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:48.649Z,1509706068.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:49.033Z,1509706069.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:49.048Z,1509706069.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:49.141Z,1509706069.141 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:47:49.141Z,1509706069.141 [BPC1] No Fault, FailCount= 1
2017-11-03T10:47:49.450Z,1509706069.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:49.527Z,1509706069.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:49.847Z,1509706069.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:49.877Z,1509706069.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:50.250Z,1509706070.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:50.318Z,1509706070.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:50.633Z,1509706070.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:50.650Z,1509706070.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:51.038Z,1509706071.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:51.055Z,1509706071.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:51.446Z,1509706071.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:51.477Z,1509706071.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:51.845Z,1509706071.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:51.877Z,1509706071.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:52.241Z,1509706072.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:52.279Z,1509706072.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:52.632Z,1509706072.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:52.647Z,1509706072.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:53.032Z,1509706073.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:53.047Z,1509706073.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:53.442Z,1509706073.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:53.480Z,1509706073.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:53.846Z,1509706073.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:53.877Z,1509706073.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:54.246Z,1509706074.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:54.276Z,1509706074.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:54.631Z,1509706074.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:54.647Z,1509706074.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:55.031Z,1509706075.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:55.046Z,1509706075.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:55.445Z,1509706075.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:55.481Z,1509706075.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:55.849Z,1509706075.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:55.885Z,1509706075.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:56.241Z,1509706076.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:56.256Z,1509706076.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:56.636Z,1509706076.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:56.658Z,1509706076.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:57.035Z,1509706077.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:57.049Z,1509706077.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:57.449Z,1509706077.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:57.484Z,1509706077.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:57.841Z,1509706077.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:57.857Z,1509706077.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:58.253Z,1509706078.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:58.283Z,1509706078.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:58.640Z,1509706078.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:58.655Z,1509706078.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:59.037Z,1509706079.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:59.052Z,1509706079.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:59.453Z,1509706079.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:59.481Z,1509706079.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:47:59.853Z,1509706079.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:47:59.884Z,1509706079.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:00.253Z,1509706080.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:00.282Z,1509706080.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:00.640Z,1509706080.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:00.658Z,1509706080.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:01.038Z,1509706081.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:01.053Z,1509706081.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:01.453Z,1509706081.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:01.488Z,1509706081.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:01.853Z,1509706081.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:01.867Z,1509706081.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:02.253Z,1509706082.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:02.289Z,1509706082.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:02.640Z,1509706082.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:02.738Z,1509706082.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:03.039Z,1509706083.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:03.054Z,1509706083.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:03.448Z,1509706083.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:03.495Z,1509706083.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:03.849Z,1509706083.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:03.871Z,1509706083.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:04.247Z,1509706084.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:04.288Z,1509706084.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:04.643Z,1509706084.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:04.695Z,1509706084.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:05.036Z,1509706085.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:05.051Z,1509706085.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:05.447Z,1509706085.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:05.466Z,1509706085.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:05.849Z,1509706085.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:05.864Z,1509706085.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:06.244Z,1509706086.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:06.259Z,1509706086.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:06.642Z,1509706086.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:06.657Z,1509706086.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:07.040Z,1509706087.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:07.055Z,1509706087.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:07.447Z,1509706087.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:07.467Z,1509706087.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:07.847Z,1509706087.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:07.866Z,1509706087.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:08.248Z,1509706088.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:08.263Z,1509706088.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:08.643Z,1509706088.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:08.663Z,1509706088.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:09.041Z,1509706089.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:09.056Z,1509706089.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:09.448Z,1509706089.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:09.463Z,1509706089.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:09.849Z,1509706089.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:09.865Z,1509706089.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:10.247Z,1509706090.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:10.266Z,1509706090.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:10.644Z,1509706090.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:10.659Z,1509706090.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:11.030Z,1509706091.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:11.051Z,1509706091.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:11.447Z,1509706091.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:11.466Z,1509706091.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:11.848Z,1509706091.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:11.870Z,1509706091.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:12.247Z,1509706092.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:12.267Z,1509706092.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:12.639Z,1509706092.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:12.653Z,1509706092.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:13.043Z,1509706093.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:13.063Z,1509706093.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:13.447Z,1509706093.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:13.467Z,1509706093.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:13.849Z,1509706093.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:13.863Z,1509706093.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:14.248Z,1509706094.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:14.271Z,1509706094.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:14.643Z,1509706094.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:14.663Z,1509706094.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:15.042Z,1509706095.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:15.062Z,1509706095.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:15.448Z,1509706095.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:15.463Z,1509706095.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:15.847Z,1509706095.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:15.867Z,1509706095.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:16.247Z,1509706096.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:16.299Z,1509706096.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:16.641Z,1509706096.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:16.706Z,1509706096.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:17.028Z,1509706097.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:17.061Z,1509706097.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:17.452Z,1509706097.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:17.467Z,1509706097.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:17.852Z,1509706097.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:17.910Z,1509706097.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:18.252Z,1509706098.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:18.275Z,1509706098.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:18.643Z,1509706098.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:18.683Z,1509706098.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:21.719Z,1509706101.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:21.766Z,1509706101.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:21.909Z,1509706101.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:21.950Z,1509706101.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:22.307Z,1509706102.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:22.327Z,1509706102.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:22.708Z,1509706102.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:22.723Z,1509706102.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:23.094Z,1509706103.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:23.109Z,1509706103.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:23.494Z,1509706103.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:23.508Z,1509706103.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:23.894Z,1509706103.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:23.909Z,1509706103.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:24.281Z,1509706104.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:24.312Z,1509706104.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:24.704Z,1509706104.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:24.719Z,1509706104.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:25.105Z,1509706105.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:25.127Z,1509706105.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:25.505Z,1509706105.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:25.520Z,1509706105.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:25.886Z,1509706105.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:25.911Z,1509706105.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:26.284Z,1509706106.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:26.310Z,1509706106.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:26.680Z,1509706106.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:26.707Z,1509706106.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:27.084Z,1509706107.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:27.113Z,1509706107.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:27.505Z,1509706107.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:27.520Z,1509706107.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:27.901Z,1509706107.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:27.916Z,1509706107.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:28.303Z,1509706108.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:28.318Z,1509706108.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:28.685Z,1509706108.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:28.714Z,1509706108.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:29.083Z,1509706109.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:29.113Z,1509706109.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:29.485Z,1509706109.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:29.513Z,1509706109.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:29.885Z,1509706109.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:29.913Z,1509706109.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:30.287Z,1509706110.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:30.312Z,1509706110.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:30.706Z,1509706110.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:30.722Z,1509706110.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:31.106Z,1509706111.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:31.121Z,1509706111.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:31.501Z,1509706111.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:31.517Z,1509706111.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:31.884Z,1509706111.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:31.911Z,1509706111.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:32.284Z,1509706112.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:32.315Z,1509706112.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:32.686Z,1509706112.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:32.718Z,1509706112.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:33.085Z,1509706113.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:33.100Z,1509706113.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:33.498Z,1509706113.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:33.525Z,1509706113.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:33.898Z,1509706113.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:33.951Z,1509706113.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:34.301Z,1509706114.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:34.330Z,1509706114.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:34.684Z,1509706114.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:34.701Z,1509706114.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:35.091Z,1509706115.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:35.124Z,1509706115.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:35.483Z,1509706115.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:35.498Z,1509706115.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:35.885Z,1509706115.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:35.900Z,1509706115.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:36.284Z,1509706116.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:36.327Z,1509706116.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:36.698Z,1509706116.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:36.734Z,1509706116.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:37.098Z,1509706117.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:37.106Z,1509706117.106 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:48:37.106Z,1509706117.106 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:48:37.106Z,1509706117.106 [BPC1](ERROR): Communications Fault
2017-11-03T10:48:37.136Z,1509706117.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:37.237Z,1509706117.237 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:48:37.506Z,1509706117.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:37.529Z,1509706117.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:37.887Z,1509706117.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:37.902Z,1509706117.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:38.287Z,1509706118.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:38.303Z,1509706118.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:38.303Z,1509706118.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 211
2017-11-03T10:48:38.303Z,1509706118.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:48:38.305Z,1509706118.305 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:38.305Z,1509706118.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 211
2017-11-03T10:48:38.305Z,1509706118.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:48:38.307Z,1509706118.307 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:38.307Z,1509706118.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 211
2017-11-03T10:48:38.307Z,1509706118.307 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:48:38.393Z,1509706118.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:48:38.393Z,1509706118.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:48:38.393Z,1509706118.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:48:38.394Z,1509706118.394 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:48:38.394Z,1509706118.394 [BPC1] No Fault, FailCount= 1
2017-11-03T10:48:38.686Z,1509706118.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:38.840Z,1509706118.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:48:38.841Z,1509706118.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 211
2017-11-03T10:48:38.841Z,1509706118.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:48:38.841Z,1509706118.841 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 211
2017-11-03T10:48:38.842Z,1509706118.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:48:38.842Z,1509706118.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 211
2017-11-03T10:48:39.086Z,1509706119.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:39.107Z,1509706119.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:48:39.108Z,1509706119.108 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:48:39.108Z,1509706119.108 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:48:39.109Z,1509706119.109 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:48:39.109Z,1509706119.109 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:48:39.109Z,1509706119.109 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:48:39.110Z,1509706119.110 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:48:39.110Z,1509706119.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:48:39.110Z,1509706119.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:48:39.489Z,1509706119.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:39.520Z,1509706119.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-03T10:48:39.525Z,1509706119.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:39.897Z,1509706119.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:39.924Z,1509706119.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-03T10:48:39.925Z,1509706119.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:40.297Z,1509706120.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:40.323Z,1509706120.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-03T10:48:40.324Z,1509706120.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:40.684Z,1509706120.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:40.699Z,1509706120.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-03T10:48:40.700Z,1509706120.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:41.084Z,1509706121.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:41.106Z,1509706121.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-03T10:48:41.107Z,1509706121.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:41.484Z,1509706121.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:41.498Z,1509706121.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-03T10:48:41.499Z,1509706121.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:41.884Z,1509706121.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:41.899Z,1509706121.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-03T10:48:41.900Z,1509706121.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:42.287Z,1509706122.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:42.302Z,1509706122.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-03T10:48:42.303Z,1509706122.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:42.697Z,1509706122.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:42.747Z,1509706122.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-03T10:48:42.748Z,1509706122.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:43.097Z,1509706123.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:43.127Z,1509706123.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-03T10:48:43.128Z,1509706123.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:43.497Z,1509706123.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:43.512Z,1509706123.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-03T10:48:43.529Z,1509706123.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:43.887Z,1509706123.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:43.902Z,1509706123.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-03T10:48:43.903Z,1509706123.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:44.287Z,1509706124.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:44.302Z,1509706124.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-03T10:48:44.303Z,1509706124.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:44.689Z,1509706124.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:44.703Z,1509706124.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-03T10:48:44.704Z,1509706124.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:45.086Z,1509706125.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:45.100Z,1509706125.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-03T10:48:45.101Z,1509706125.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:45.501Z,1509706125.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:45.516Z,1509706125.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-03T10:48:45.533Z,1509706125.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:45.898Z,1509706125.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:45.912Z,1509706125.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-03T10:48:45.913Z,1509706125.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:46.304Z,1509706126.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:46.334Z,1509706126.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-03T10:48:46.335Z,1509706126.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:46.689Z,1509706126.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:46.703Z,1509706126.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-03T10:48:46.704Z,1509706126.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:47.092Z,1509706127.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:47.106Z,1509706127.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-03T10:48:47.107Z,1509706127.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:47.491Z,1509706127.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:47.506Z,1509706127.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-03T10:48:47.506Z,1509706127.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:47.892Z,1509706127.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:47.907Z,1509706127.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-03T10:48:47.908Z,1509706127.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:48.292Z,1509706128.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:48.307Z,1509706128.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-03T10:48:48.307Z,1509706128.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:48.697Z,1509706128.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:48.733Z,1509706128.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-03T10:48:48.734Z,1509706128.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:49.097Z,1509706129.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:49.112Z,1509706129.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-03T10:48:49.113Z,1509706129.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:49.505Z,1509706129.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:49.533Z,1509706129.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-03T10:48:49.534Z,1509706129.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:49.890Z,1509706129.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:49.905Z,1509706129.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-03T10:48:49.906Z,1509706129.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:50.291Z,1509706130.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:50.306Z,1509706130.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-03T10:48:50.307Z,1509706130.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:50.692Z,1509706130.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:50.707Z,1509706130.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-03T10:48:50.708Z,1509706130.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:51.090Z,1509706131.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:51.105Z,1509706131.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-03T10:48:51.106Z,1509706131.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:51.505Z,1509706131.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:51.535Z,1509706131.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-03T10:48:51.536Z,1509706131.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:51.897Z,1509706131.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:51.912Z,1509706131.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-03T10:48:51.913Z,1509706131.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:52.305Z,1509706132.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:52.333Z,1509706132.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-03T10:48:52.334Z,1509706132.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:52.692Z,1509706132.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:52.706Z,1509706132.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-03T10:48:52.707Z,1509706132.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:53.091Z,1509706133.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:53.153Z,1509706133.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-03T10:48:53.154Z,1509706133.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:53.491Z,1509706133.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:53.506Z,1509706133.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-03T10:48:53.507Z,1509706133.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:53.895Z,1509706133.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:53.914Z,1509706133.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-03T10:48:53.915Z,1509706133.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:54.292Z,1509706134.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:54.307Z,1509706134.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-03T10:48:54.308Z,1509706134.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:54.697Z,1509706134.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:54.742Z,1509706134.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-03T10:48:54.743Z,1509706134.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:55.101Z,1509706135.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:55.115Z,1509706135.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-03T10:48:55.117Z,1509706135.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:55.498Z,1509706135.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:55.542Z,1509706135.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-03T10:48:55.543Z,1509706135.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:55.891Z,1509706135.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:55.942Z,1509706135.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-03T10:48:55.943Z,1509706135.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:56.294Z,1509706136.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:56.308Z,1509706136.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-03T10:48:56.309Z,1509706136.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:56.692Z,1509706136.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:56.707Z,1509706136.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-03T10:48:56.708Z,1509706136.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:57.092Z,1509706137.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:57.106Z,1509706137.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-03T10:48:57.107Z,1509706137.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:57.498Z,1509706137.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:57.512Z,1509706137.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-03T10:48:57.513Z,1509706137.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:57.902Z,1509706137.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:57.916Z,1509706137.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-03T10:48:57.917Z,1509706137.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:58.298Z,1509706138.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:58.313Z,1509706138.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:58.688Z,1509706138.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:58.703Z,1509706138.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:59.090Z,1509706139.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:59.111Z,1509706139.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:59.492Z,1509706139.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:59.515Z,1509706139.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:48:59.894Z,1509706139.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:48:59.910Z,1509706139.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:00.294Z,1509706140.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:00.309Z,1509706140.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:00.698Z,1509706140.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:00.713Z,1509706140.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:01.097Z,1509706141.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:01.112Z,1509706141.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:01.498Z,1509706141.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:01.513Z,1509706141.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:01.891Z,1509706141.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:01.906Z,1509706141.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:02.294Z,1509706142.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:02.309Z,1509706142.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:02.694Z,1509706142.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:02.709Z,1509706142.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:03.092Z,1509706143.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:03.107Z,1509706143.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:03.498Z,1509706143.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:03.513Z,1509706143.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:03.902Z,1509706143.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:03.917Z,1509706143.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:04.298Z,1509706144.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:04.319Z,1509706144.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:04.694Z,1509706144.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:04.709Z,1509706144.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:05.094Z,1509706145.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:05.109Z,1509706145.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:05.492Z,1509706145.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:05.508Z,1509706145.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:05.895Z,1509706145.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:05.910Z,1509706145.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:06.294Z,1509706146.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:06.309Z,1509706146.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:06.698Z,1509706146.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:06.758Z,1509706146.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:07.098Z,1509706147.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:07.113Z,1509706147.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:07.498Z,1509706147.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:07.513Z,1509706147.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:07.895Z,1509706147.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:07.910Z,1509706147.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:08.290Z,1509706148.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:08.305Z,1509706148.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:08.694Z,1509706148.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:08.715Z,1509706148.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:09.092Z,1509706149.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:09.107Z,1509706149.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:09.498Z,1509706149.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:09.513Z,1509706149.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:09.897Z,1509706149.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:09.912Z,1509706149.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:10.298Z,1509706150.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:10.313Z,1509706150.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:10.697Z,1509706150.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:10.712Z,1509706150.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:11.093Z,1509706151.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:11.102Z,1509706151.102 [BPC1](ERROR): Failed to receive battery data
2017-11-03T10:49:11.102Z,1509706151.102 [BPC1] Communications Fault, FailCount= 1
2017-11-03T10:49:11.102Z,1509706151.102 [BPC1](ERROR): Communications Fault
2017-11-03T10:49:11.110Z,1509706151.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:11.197Z,1509706151.197 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-03T10:49:11.497Z,1509706151.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:11.512Z,1509706151.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:11.893Z,1509706151.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:11.907Z,1509706151.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:12.289Z,1509706152.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:12.304Z,1509706152.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:12.385Z,1509706152.385 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-03T10:49:12.385Z,1509706152.385 [BPC1] No Fault, FailCount= 1
2017-11-03T10:49:12.699Z,1509706152.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:12.783Z,1509706152.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:13.102Z,1509706153.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:13.117Z,1509706153.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:13.498Z,1509706153.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:13.555Z,1509706153.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:13.892Z,1509706153.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:13.911Z,1509706153.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:14.295Z,1509706154.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:14.312Z,1509706154.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:14.692Z,1509706154.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:14.707Z,1509706154.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:15.093Z,1509706155.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:15.108Z,1509706155.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:15.497Z,1509706155.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:15.513Z,1509706155.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:15.901Z,1509706155.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:15.917Z,1509706155.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:16.298Z,1509706156.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:16.319Z,1509706156.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:16.695Z,1509706156.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:16.710Z,1509706156.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:17.095Z,1509706157.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:17.110Z,1509706157.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:17.495Z,1509706157.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:17.510Z,1509706157.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:17.894Z,1509706157.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:17.910Z,1509706157.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:18.289Z,1509706158.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:18.304Z,1509706158.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:18.698Z,1509706158.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:18.714Z,1509706158.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:21.798Z,1509706161.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:21.814Z,1509706161.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:21.817Z,1509706161.817 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-03T10:44:21.3Z
2017-11-03T10:49:21.817Z,1509706161.817 [Default:CheckIn:Read_GPS] Stopped
2017-11-03T10:49:21.818Z,1509706161.818 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-03T10:49:21.978Z,1509706161.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:22.016Z,1509706162.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:22.487Z,1509706162.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:22.503Z,1509706162.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:22.761Z,1509706162.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:22.798Z,1509706162.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:23.164Z,1509706163.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:23.191Z,1509706163.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:23.582Z,1509706163.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:23.615Z,1509706163.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:26.657Z,1509706166.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:26.730Z,1509706166.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:26.845Z,1509706166.845 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171103T001125/Courier0248.lzma
2017-11-03T10:49:26.886Z,1509706166.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:26.913Z,1509706166.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:27.271Z,1509706167.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:27.337Z,1509706167.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:27.653Z,1509706167.653 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Courier0248.lzma.bak
2017-11-03T10:49:27.653Z,1509706167.653 [DataOverHttps](INFO): SBD MOMSN=5183375
2017-11-03T10:49:27.675Z,1509706167.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:27.744Z,1509706167.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:28.288Z,1509706168.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:28.341Z,1509706168.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:28.495Z,1509706168.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:28.515Z,1509706168.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:31.586Z,1509706171.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:31.646Z,1509706171.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:31.799Z,1509706171.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:31.814Z,1509706171.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:32.172Z,1509706172.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:32.198Z,1509706172.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:32.587Z,1509706172.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:32.601Z,1509706172.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:32.974Z,1509706172.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:32.999Z,1509706172.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:33.375Z,1509706173.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:33.409Z,1509706173.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:36.502Z,1509706176.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:36.517Z,1509706176.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:36.641Z,1509706176.641 [DataOverHttps](INFO): Sending 246 bytes from file Logs/20171103T001125/Express0249.lzma
2017-11-03T10:49:36.673Z,1509706176.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:36.722Z,1509706176.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:37.066Z,1509706177.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:37.095Z,1509706177.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:37.435Z,1509706177.435 [DataOverHttps](INFO): Moved sent file to Logs/20171103T001125/Express0249.lzma.bak
2017-11-03T10:49:37.435Z,1509706177.435 [DataOverHttps](INFO): SBD MOMSN=5183379
2017-11-03T10:49:37.456Z,1509706177.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:37.471Z,1509706177.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:38.073Z,1509706178.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:38.103Z,1509706178.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:38.107Z,1509706178.107 [Default:CheckIn:Read_Iridium] Stopped
2017-11-03T10:49:38.107Z,1509706178.107 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-03T10:49:38.107Z,1509706178.107 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-03T10:49:38.259Z,1509706178.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:38.299Z,1509706178.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:41.422Z,1509706181.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:41.445Z,1509706181.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:41.605Z,1509706181.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:41.621Z,1509706181.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:41.999Z,1509706181.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:42.014Z,1509706182.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:42.390Z,1509706182.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:42.455Z,1509706182.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:42.785Z,1509706182.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:42.858Z,1509706182.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:43.176Z,1509706183.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:43.197Z,1509706183.197 [PNI_TCM](ERROR): CRC does not match. Expected:0x28581 got:0x2617
2017-11-03T10:49:43.222Z,1509706183.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:43.599Z,1509706183.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:43.643Z,1509706183.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:43.996Z,1509706183.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:44.011Z,1509706184.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:44.398Z,1509706184.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:44.451Z,1509706184.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:44.772Z,1509706184.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:44.827Z,1509706184.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:45.187Z,1509706185.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:45.202Z,1509706185.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:45.585Z,1509706185.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:45.604Z,1509706185.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:45.987Z,1509706185.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:46.022Z,1509706186.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:46.388Z,1509706186.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:46.395Z,1509706186.395 [PNI_TCM](ERROR): CRC does not match. Expected:0x42420 got:0x2588
2017-11-03T10:49:46.423Z,1509706186.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:46.798Z,1509706186.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:46.826Z,1509706186.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:47.201Z,1509706187.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:47.222Z,1509706187.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:47.599Z,1509706187.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:47.615Z,1509706187.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:47.976Z,1509706187.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:48.004Z,1509706188.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:48.373Z,1509706188.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:48.406Z,1509706188.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:48.778Z,1509706188.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:48.803Z,1509706188.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:49.176Z,1509706189.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:49.205Z,1509706189.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:49.594Z,1509706189.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:49.619Z,1509706189.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:49.998Z,1509706189.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:50.019Z,1509706190.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:50.401Z,1509706190.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:50.416Z,1509706190.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:50.772Z,1509706190.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:50.809Z,1509706190.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:51.176Z,1509706191.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:51.205Z,1509706191.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:51.578Z,1509706191.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:51.605Z,1509706191.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:51.982Z,1509706191.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:52.007Z,1509706192.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:52.377Z,1509706192.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:52.405Z,1509706192.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:52.800Z,1509706192.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:52.815Z,1509706192.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:53.202Z,1509706193.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:53.222Z,1509706193.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:53.597Z,1509706193.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:53.612Z,1509706193.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:53.976Z,1509706193.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:54.006Z,1509706194.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:54.372Z,1509706194.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:54.402Z,1509706194.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:54.779Z,1509706194.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:54.810Z,1509706194.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:55.178Z,1509706195.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:55.209Z,1509706195.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:55.589Z,1509706195.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:55.635Z,1509706195.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:55.991Z,1509706195.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:56.059Z,1509706196.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:56.397Z,1509706196.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:56.412Z,1509706196.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:56.781Z,1509706196.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:56.812Z,1509706196.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:57.175Z,1509706197.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:57.234Z,1509706197.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:57.580Z,1509706197.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:57.603Z,1509706197.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:57.985Z,1509706197.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:58.038Z,1509706198.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:58.379Z,1509706198.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:58.435Z,1509706198.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:58.795Z,1509706198.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:58.831Z,1509706198.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:59.191Z,1509706199.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:59.218Z,1509706199.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:59.591Z,1509706199.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:59.617Z,1509706199.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:49:59.980Z,1509706199.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:49:59.995Z,1509706199.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:00.376Z,1509706200.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:00.419Z,1509706200.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:00.777Z,1509706200.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:00.813Z,1509706200.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:01.178Z,1509706201.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:01.216Z,1509706201.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:01.590Z,1509706201.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:01.621Z,1509706201.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:01.990Z,1509706201.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:02.018Z,1509706202.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:02.392Z,1509706202.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:02.417Z,1509706202.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:02.778Z,1509706202.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:02.794Z,1509706202.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:03.185Z,1509706203.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:03.219Z,1509706203.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:03.576Z,1509706203.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:03.626Z,1509706203.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:03.976Z,1509706203.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:03.995Z,1509706203.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:04.378Z,1509706204.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:04.394Z,1509706204.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:04.790Z,1509706204.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:04.805Z,1509706204.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:05.194Z,1509706205.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:05.232Z,1509706205.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:05.593Z,1509706205.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:05.599Z,1509706205.599 [PNI_TCM](ERROR): CRC does not match. Expected:0x20984 got:0x49152
2017-11-03T10:50:05.627Z,1509706205.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:05.976Z,1509706205.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:05.994Z,1509706205.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:06.378Z,1509706206.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:06.394Z,1509706206.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:06.780Z,1509706206.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:06.844Z,1509706206.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:07.176Z,1509706207.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:07.211Z,1509706207.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:07.591Z,1509706207.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:07.607Z,1509706207.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:07.994Z,1509706207.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:08.009Z,1509706208.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:08.390Z,1509706208.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:08.426Z,1509706208.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:08.779Z,1509706208.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:08.815Z,1509706208.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:09.181Z,1509706209.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:09.188Z,1509706209.188 [PNI_TCM](ERROR): CRC does not match. Expected:0x26400 got:0x6593
2017-11-03T10:50:09.254Z,1509706209.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:09.581Z,1509706209.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:09.599Z,1509706209.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:09.979Z,1509706209.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:10.034Z,1509706210.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:10.375Z,1509706210.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:10.394Z,1509706210.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:10.788Z,1509706210.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:10.835Z,1509706210.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:11.193Z,1509706211.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:11.236Z,1509706211.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:11.593Z,1509706211.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:11.634Z,1509706211.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:11.985Z,1509706211.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:11.993Z,1509706211.993 [PNI_TCM](ERROR): CRC does not match. Expected:0x35797 got:0x49152
2017-11-03T10:50:12.034Z,1509706212.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:12.390Z,1509706212.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:12.410Z,1509706212.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:12.782Z,1509706212.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:12.798Z,1509706212.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:13.187Z,1509706213.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:13.227Z,1509706213.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:13.594Z,1509706213.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:13.601Z,1509706213.601 [PNI_TCM](ERROR): CRC does not match. Expected:0x57588 got:0x16690
2017-11-03T10:50:13.636Z,1509706213.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:13.995Z,1509706213.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:14.010Z,1509706214.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:14.394Z,1509706214.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:14.409Z,1509706214.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:14.786Z,1509706214.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:14.829Z,1509706214.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:15.188Z,1509706215.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:15.195Z,1509706215.195 [PNI_TCM](ERROR): CRC does not match. Expected:0x45631 got:0x27999
2017-11-03T10:50:15.231Z,1509706215.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:15.586Z,1509706215.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:15.605Z,1509706215.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:15.990Z,1509706215.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:16.004Z,1509706216.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:16.380Z,1509706216.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:16.415Z,1509706216.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:16.794Z,1509706216.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:16.809Z,1509706216.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:17.196Z,1509706217.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:17.211Z,1509706217.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:17.592Z,1509706217.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:17.615Z,1509706217.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:17.986Z,1509706217.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:18.029Z,1509706218.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:18.389Z,1509706218.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:18.396Z,1509706218.396 [PNI_TCM](ERROR): CRC does not match. Expected:0x18544 got:0x59548
2017-11-03T10:50:18.415Z,1509706218.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:18.791Z,1509706218.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:18.806Z,1509706218.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:19.189Z,1509706219.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:19.204Z,1509706219.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:19.593Z,1509706219.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:19.634Z,1509706219.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:19.996Z,1509706219.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:20.002Z,1509706220.002 [PNI_TCM](ERROR): CRC does not match. Expected:0x46002 got:0x73
2017-11-03T10:50:20.039Z,1509706220.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:20.395Z,1509706220.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:20.415Z,1509706220.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:20.521Z,1509706220.521 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-03T10:50:20.521Z,1509706220.521 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-03T10:50:20.790Z,1509706220.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:20.804Z,1509706220.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:20.858Z,1509706220.858 [Rowe_600LCM](INFO): Initializing
2017-11-03T10:50:20.860Z,1509706220.860 [Rowe_600LCM](INFO): Checking LCM
2017-11-03T10:50:20.861Z,1509706220.861 [Rowe_600LCM](INFO): LCM OK
2017-11-03T10:50:20.861Z,1509706220.861 [Rowe_600LCM](INFO): Powering up
2017-11-03T10:50:21.179Z,1509706221.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:21.226Z,1509706221.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:21.586Z,1509706221.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:21.607Z,1509706221.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:21.991Z,1509706221.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:22.069Z,1509706222.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:22.381Z,1509706222.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:22.397Z,1509706222.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:22.798Z,1509706222.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:22.855Z,1509706222.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:23.198Z,1509706223.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:23.218Z,1509706223.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:23.596Z,1509706223.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:23.643Z,1509706223.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:23.985Z,1509706223.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:24.042Z,1509706224.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:24.386Z,1509706224.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:24.418Z,1509706224.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:24.789Z,1509706224.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:24.796Z,1509706224.796 [PNI_TCM](ERROR): CRC does not match. Expected:0x56925 got:0x60479
2017-11-03T10:50:24.837Z,1509706224.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:25.006Z,1509706225.006 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-11-03T10:50:25.067Z,1509706225.067 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-11-03T10:50:25.068Z,1509706225.068 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-11-03T10:50:25.069Z,1509706225.069 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-11-03T10:50:25.070Z,1509706225.070 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-11-03T10:50:25.188Z,1509706225.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:25.218Z,1509706225.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:25.597Z,1509706225.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:25.650Z,1509706225.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:26.019Z,1509706226.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:26.058Z,1509706226.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:26.401Z,1509706226.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:26.417Z,1509706226.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:26.779Z,1509706226.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:26.807Z,1509706226.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:27.190Z,1509706227.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:27.205Z,1509706227.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:27.577Z,1509706227.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:27.623Z,1509706227.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:27.978Z,1509706227.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:27.000Z,1509706228.000 [PNI_TCM](ERROR): CRC does not match. Expected:0x11075 got:0x7286
2017-11-03T10:50:28.027Z,1509706228.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:28.374Z,1509706228.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:28.403Z,1509706228.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:28.794Z,1509706228.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:28.815Z,1509706228.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:29.201Z,1509706229.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:29.216Z,1509706229.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:29.597Z,1509706229.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:29.613Z,1509706229.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:29.990Z,1509706229.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:30.005Z,1509706230.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:30.390Z,1509706230.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:30.410Z,1509706230.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:30.775Z,1509706230.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:30.819Z,1509706230.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:31.176Z,1509706231.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:31.198Z,1509706231.198 [PNI_TCM](ERROR): CRC does not match. Expected:0x27021 got:0x4952
2017-11-03T10:50:31.227Z,1509706231.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:31.599Z,1509706231.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:31.614Z,1509706231.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:32.000Z,1509706232.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:32.016Z,1509706232.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:32.400Z,1509706232.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:32.416Z,1509706232.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:32.799Z,1509706232.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:32.815Z,1509706232.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:33.190Z,1509706233.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:33.205Z,1509706233.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:33.578Z,1509706233.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:33.615Z,1509706233.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:33.977Z,1509706233.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:34.022Z,1509706234.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:34.377Z,1509706234.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:34.398Z,1509706234.398 [PNI_TCM](ERROR): CRC does not match. Expected:0x2700 got:0x58042
2017-11-03T10:50:34.462Z,1509706234.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:34.758Z,1509706234.758 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-03T10:50:34.758Z,1509706234.758 [NAL9602] Data Fault, FailCount= 3
2017-11-03T10:50:34.758Z,1509706234.758 [NAL9602](ERROR): Data Fault
2017-11-03T10:50:34.777Z,1509706234.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:34.854Z,1509706234.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:34.938Z,1509706234.938 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-03T10:50:35.163Z,1509706235.163 [NAL9602](INFO): Powering down
2017-11-03T10:50:35.182Z,1509706235.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:35.215Z,1509706235.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:35.578Z,1509706235.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:35.650Z,1509706235.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:35.976Z,1509706235.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:36.011Z,1509706236.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:36.092Z,1509706236.092 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-03T10:50:36.093Z,1509706236.093 [NAL9602] No Fault, FailCount= 3
2017-11-03T10:50:36.373Z,1509706236.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:36.454Z,1509706236.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.443795 seconds old.
2017-11-03T10:50:36.455Z,1509706236.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:36.456Z,1509706236.456 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.444159 seconds old.
2017-11-03T10:50:36.457Z,1509706236.457 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.444591 seconds old.
2017-11-03T10:50:36.795Z,1509706236.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:36.849Z,1509706236.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.838570 seconds old.
2017-11-03T10:50:36.850Z,1509706236.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:36.851Z,1509706236.851 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.839102 seconds old.
2017-11-03T10:50:36.852Z,1509706236.852 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.839456 seconds old.
2017-11-03T10:50:37.177Z,1509706237.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:37.208Z,1509706237.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.197791 seconds old.
2017-11-03T10:50:37.209Z,1509706237.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:37.210Z,1509706237.210 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.198375 seconds old.
2017-11-03T10:50:37.211Z,1509706237.211 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198737 seconds old.
2017-11-03T10:50:37.577Z,1509706237.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:37.608Z,1509706237.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:37.982Z,1509706237.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:38.009Z,1509706238.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:38.381Z,1509706238.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:38.407Z,1509706238.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:38.784Z,1509706238.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:38.853Z,1509706238.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:41.999Z,1509706241.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:42.017Z,1509706242.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:42.131Z,1509706242.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:42.179Z,1509706242.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:42.531Z,1509706242.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:42.557Z,1509706242.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:42.931Z,1509706242.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:42.957Z,1509706242.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:43.350Z,1509706243.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:43.366Z,1509706243.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:43.741Z,1509706243.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:43.756Z,1509706243.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:44.128Z,1509706244.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:44.154Z,1509706244.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:44.561Z,1509706244.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:44.608Z,1509706244.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:44.927Z,1509706244.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:44.955Z,1509706244.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:45.329Z,1509706245.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:45.360Z,1509706245.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:45.735Z,1509706245.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:45.761Z,1509706245.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:46.134Z,1509706246.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:46.159Z,1509706246.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:46.581Z,1509706246.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:46.626Z,1509706246.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:46.935Z,1509706246.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:46.951Z,1509706246.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:47.336Z,1509706247.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:47.421Z,1509706247.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:47.737Z,1509706247.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:47.752Z,1509706247.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:48.136Z,1509706248.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:48.151Z,1509706248.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:48.536Z,1509706248.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:48.635Z,1509706248.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:48.936Z,1509706248.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:48.951Z,1509706248.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:49.336Z,1509706249.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:49.391Z,1509706249.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:49.737Z,1509706249.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:49.782Z,1509706249.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:50.137Z,1509706250.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:50.152Z,1509706250.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:50.536Z,1509706250.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:50.552Z,1509706250.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:50.939Z,1509706250.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:50.958Z,1509706250.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:51.341Z,1509706251.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:51.357Z,1509706251.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:51.737Z,1509706251.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:51.759Z,1509706251.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:52.139Z,1509706252.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:52.154Z,1509706252.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:52.540Z,1509706252.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:52.556Z,1509706252.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:52.949Z,1509706252.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:52.964Z,1509706252.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:53.342Z,1509706253.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:53.357Z,1509706253.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:53.743Z,1509706253.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:53.758Z,1509706253.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:54.143Z,1509706254.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:54.163Z,1509706254.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:54.541Z,1509706254.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:54.556Z,1509706254.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:54.943Z,1509706254.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:54.959Z,1509706254.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:55.348Z,1509706255.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:55.364Z,1509706255.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:55.740Z,1509706255.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:55.759Z,1509706255.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:56.142Z,1509706256.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:56.160Z,1509706256.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:56.541Z,1509706256.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:56.555Z,1509706256.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:56.942Z,1509706256.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:56.963Z,1509706256.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:57.348Z,1509706257.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:57.363Z,1509706257.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:57.740Z,1509706257.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:57.755Z,1509706257.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:58.141Z,1509706258.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:58.206Z,1509706258.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:58.559Z,1509706258.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:58.630Z,1509706258.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:58.939Z,1509706258.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:58.955Z,1509706258.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:59.342Z,1509706259.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:59.366Z,1509706259.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:50:59.741Z,1509706259.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:50:59.765Z,1509706259.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:00.141Z,1509706260.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:00.169Z,1509706260.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:00.559Z,1509706260.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:00.676Z,1509706260.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:00.932Z,1509706260.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:00.977Z,1509706260.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:01.340Z,1509706261.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:01.419Z,1509706261.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:01.732Z,1509706261.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:01.791Z,1509706261.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:02.189Z,1509706262.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:02.243Z,1509706262.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:02.531Z,1509706262.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:02.630Z,1509706262.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:02.943Z,1509706262.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:02.995Z,1509706262.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:03.339Z,1509706263.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:03.363Z,1509706263.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:03.740Z,1509706263.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:03.755Z,1509706263.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:04.147Z,1509706264.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:04.197Z,1509706264.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:04.539Z,1509706264.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:04.571Z,1509706264.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:04.933Z,1509706264.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:04.985Z,1509706264.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:05.314Z,1509706265.314 [NAL9602](INFO): Powering up NAL9602
2017-11-03T10:51:05.333Z,1509706265.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:05.390Z,1509706265.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:05.733Z,1509706265.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:05.774Z,1509706265.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:06.175Z,1509706266.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:06.210Z,1509706266.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:06.538Z,1509706266.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:06.557Z,1509706266.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:06.944Z,1509706266.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:06.983Z,1509706266.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:07.340Z,1509706267.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:07.386Z,1509706267.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:07.738Z,1509706267.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:07.779Z,1509706267.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:08.140Z,1509706268.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:08.156Z,1509706268.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:08.540Z,1509706268.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:08.607Z,1509706268.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:08.940Z,1509706268.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:08.967Z,1509706268.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:09.340Z,1509706269.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:09.368Z,1509706269.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:09.741Z,1509706269.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:09.765Z,1509706269.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:10.131Z,1509706270.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:10.206Z,1509706270.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:10.532Z,1509706270.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:10.570Z,1509706270.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:10.942Z,1509706270.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:10.971Z,1509706270.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:11.342Z,1509706271.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:11.365Z,1509706271.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:11.742Z,1509706271.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:11.773Z,1509706271.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:12.141Z,1509706272.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:12.182Z,1509706272.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:12.558Z,1509706272.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:12.616Z,1509706272.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:12.937Z,1509706272.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:12.985Z,1509706272.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:13.364Z,1509706273.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:13.447Z,1509706273.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:13.741Z,1509706273.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:13.788Z,1509706273.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:14.148Z,1509706274.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:14.179Z,1509706274.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:14.612Z,1509706274.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:14.648Z,1509706274.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:14.941Z,1509706274.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:14.979Z,1509706274.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:15.340Z,1509706275.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:15.433Z,1509706275.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:15.751Z,1509706275.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:15.786Z,1509706275.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:16.123Z,1509706276.123 [NAL9602](INFO): NAL9602 initialized
2017-11-03T10:51:16.140Z,1509706276.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:16.222Z,1509706276.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:16.536Z,1509706276.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:16.631Z,1509706276.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:16.949Z,1509706276.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:16.975Z,1509706276.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:17.349Z,1509706277.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:17.374Z,1509706277.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:17.749Z,1509706277.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:17.774Z,1509706277.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:18.135Z,1509706278.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:18.150Z,1509706278.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:18.536Z,1509706278.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:18.551Z,1509706278.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:18.934Z,1509706278.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:18.961Z,1509706278.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:19.341Z,1509706279.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:19.355Z,1509706279.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:19.741Z,1509706279.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:19.756Z,1509706279.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:20.150Z,1509706280.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:20.165Z,1509706280.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:20.548Z,1509706280.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:20.563Z,1509706280.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:20.944Z,1509706280.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:20.971Z,1509706280.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:21.341Z,1509706281.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:21.356Z,1509706281.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:21.748Z,1509706281.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:21.763Z,1509706281.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:22.144Z,1509706282.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:22.159Z,1509706282.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:22.541Z,1509706282.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:22.556Z,1509706282.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:22.952Z,1509706282.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:22.968Z,1509706282.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:23.352Z,1509706283.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:23.375Z,1509706283.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:23.752Z,1509706283.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:23.767Z,1509706283.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:24.141Z,1509706284.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:24.157Z,1509706284.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:24.543Z,1509706284.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:24.559Z,1509706284.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:24.941Z,1509706284.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:24.956Z,1509706284.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:25.352Z,1509706285.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:25.367Z,1509706285.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:25.743Z,1509706285.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:25.759Z,1509706285.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:26.152Z,1509706286.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:26.167Z,1509706286.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:26.574Z,1509706286.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:26.650Z,1509706286.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:26.952Z,1509706286.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:27.014Z,1509706287.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:27.341Z,1509706287.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:27.357Z,1509706287.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:27.763Z,1509706287.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:27.795Z,1509706287.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:28.142Z,1509706288.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:28.158Z,1509706288.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:28.547Z,1509706288.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:28.802Z,1509706288.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:28.964Z,1509706288.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:28.979Z,1509706288.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:29.365Z,1509706289.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:29.381Z,1509706289.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:29.761Z,1509706289.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:29.818Z,1509706289.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:30.144Z,1509706290.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:30.171Z,1509706290.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:30.570Z,1509706290.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:30.658Z,1509706290.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:30.943Z,1509706290.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:30.969Z,1509706290.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:31.345Z,1509706291.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:31.416Z,1509706291.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:31.737Z,1509706291.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:31.773Z,1509706291.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:32.167Z,1509706292.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:32.187Z,1509706292.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:32.568Z,1509706292.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:32.582Z,1509706292.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:32.950Z,1509706292.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:32.983Z,1509706292.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:33.345Z,1509706293.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:33.369Z,1509706293.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:33.744Z,1509706293.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:33.759Z,1509706293.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:34.145Z,1509706294.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:34.177Z,1509706294.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:34.540Z,1509706294.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:34.556Z,1509706294.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:34.974Z,1509706294.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:34.990Z,1509706294.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:35.354Z,1509706295.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:35.384Z,1509706295.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:35.754Z,1509706295.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:35.793Z,1509706295.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:36.160Z,1509706296.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:36.175Z,1509706296.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:36.551Z,1509706296.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:36.567Z,1509706296.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:36.951Z,1509706296.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:37.011Z,1509706297.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:37.360Z,1509706297.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:37.375Z,1509706297.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:37.737Z,1509706297.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:37.771Z,1509706297.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:38.160Z,1509706298.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:38.177Z,1509706298.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:38.564Z,1509706298.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:38.583Z,1509706298.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:38.958Z,1509706298.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:38.973Z,1509706298.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:42.157Z,1509706302.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:42.173Z,1509706302.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:42.173Z,1509706302.173 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 212
2017-11-03T10:51:42.173Z,1509706302.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-03T10:51:42.175Z,1509706302.175 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:42.175Z,1509706302.175 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 212
2017-11-03T10:51:42.175Z,1509706302.175 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-03T10:51:42.177Z,1509706302.177 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:42.177Z,1509706302.177 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 212
2017-11-03T10:51:42.177Z,1509706302.177 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-03T10:51:42.257Z,1509706302.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-03T10:51:42.257Z,1509706302.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-03T10:51:42.257Z,1509706302.257 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-03T10:51:42.294Z,1509706302.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:42.413Z,1509706302.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-03T10:51:42.413Z,1509706302.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 212
2017-11-03T10:51:42.413Z,1509706302.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-03T10:51:42.413Z,1509706302.413 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 212
2017-11-03T10:51:42.414Z,1509706302.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-03T10:51:42.414Z,1509706302.414 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 212
2017-11-03T10:51:42.729Z,1509706302.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:42.778Z,1509706302.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-03T10:51:42.779Z,1509706302.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:51:42.779Z,1509706302.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:51:42.779Z,1509706302.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-03T10:51:42.780Z,1509706302.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:51:42.780Z,1509706302.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:51:42.781Z,1509706302.781 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-03T10:51:42.781Z,1509706302.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-03T10:51:42.781Z,1509706302.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-03T10:51:43.106Z,1509706303.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:43.154Z,1509706303.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:43.505Z,1509706303.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:43.530Z,1509706303.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:43.895Z,1509706303.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:43.911Z,1509706303.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:44.293Z,1509706304.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:44.339Z,1509706304.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:44.703Z,1509706304.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:44.731Z,1509706304.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:45.113Z,1509706305.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:45.167Z,1509706305.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:45.513Z,1509706305.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:45.571Z,1509706305.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:45.914Z,1509706305.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:45.946Z,1509706305.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:46.301Z,1509706306.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:46.316Z,1509706306.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:46.713Z,1509706306.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:46.744Z,1509706306.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:47.103Z,1509706307.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:47.119Z,1509706307.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:47.503Z,1509706307.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:47.519Z,1509706307.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:47.906Z,1509706307.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:47.922Z,1509706307.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:48.306Z,1509706308.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:48.322Z,1509706308.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:48.706Z,1509706308.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:48.722Z,1509706308.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:49.106Z,1509706309.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:49.127Z,1509706309.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:49.497Z,1509706309.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:49.513Z,1509706309.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:49.906Z,1509706309.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:49.922Z,1509706309.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:50.310Z,1509706310.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:50.326Z,1509706310.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:50.703Z,1509706310.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:50.724Z,1509706310.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:51.151Z,1509706311.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:51.171Z,1509706311.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:51.502Z,1509706311.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:51.518Z,1509706311.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:51.907Z,1509706311.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:51.924Z,1509706311.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:52.307Z,1509706312.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:52.327Z,1509706312.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:52.708Z,1509706312.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:52.723Z,1509706312.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:53.157Z,1509706313.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:53.224Z,1509706313.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:53.499Z,1509706313.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:53.514Z,1509706313.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:53.908Z,1509706313.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:53.923Z,1509706313.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:54.309Z,1509706314.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:54.325Z,1509706314.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:54.707Z,1509706314.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:54.726Z,1509706314.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:55.104Z,1509706315.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:55.119Z,1509706315.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:55.495Z,1509706315.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:55.511Z,1509706315.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:55.907Z,1509706315.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:55.926Z,1509706315.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:56.309Z,1509706316.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:56.324Z,1509706316.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:56.721Z,1509706316.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:56.751Z,1509706316.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:57.100Z,1509706317.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:57.115Z,1509706317.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:57.503Z,1509706317.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:57.566Z,1509706317.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:57.907Z,1509706317.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:57.962Z,1509706317.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:58.307Z,1509706318.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:58.326Z,1509706318.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:58.724Z,1509706318.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:58.739Z,1509706318.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:59.095Z,1509706319.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:59.151Z,1509706319.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:59.495Z,1509706319.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:59.510Z,1509706319.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:51:59.621Z,1509706319.621 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-03T10:51:59.905Z,1509706319.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:51:59.943Z,1509706319.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:00.304Z,1509706320.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:00.344Z,1509706320.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:00.710Z,1509706320.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:00.738Z,1509706320.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:01.097Z,1509706321.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:01.112Z,1509706321.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:01.499Z,1509706321.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:01.535Z,1509706321.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:01.909Z,1509706321.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:01.939Z,1509706321.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:02.305Z,1509706322.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:02.337Z,1509706322.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:02.709Z,1509706322.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:02.741Z,1509706322.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:03.094Z,1509706323.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:03.121Z,1509706323.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:03.503Z,1509706323.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:03.518Z,1509706323.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:03.909Z,1509706323.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:03.924Z,1509706323.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:04.312Z,1509706324.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:04.327Z,1509706324.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:04.705Z,1509706324.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:04.720Z,1509706324.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:05.149Z,1509706325.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:05.183Z,1509706325.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:05.492Z,1509706325.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:05.507Z,1509706325.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:05.902Z,1509706325.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:05.923Z,1509706325.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:06.307Z,1509706326.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:06.326Z,1509706326.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:06.711Z,1509706326.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:06.735Z,1509706326.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:07.177Z,1509706327.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:07.213Z,1509706327.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:07.495Z,1509706327.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:07.520Z,1509706327.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:07.913Z,1509706327.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:07.929Z,1509706327.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:08.312Z,1509706328.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:08.327Z,1509706328.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:08.709Z,1509706328.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:08.725Z,1509706328.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:09.093Z,1509706329.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:09.120Z,1509706329.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:09.495Z,1509706329.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:09.521Z,1509706329.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:09.909Z,1509706329.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:09.925Z,1509706329.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:10.312Z,1509706330.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:10.327Z,1509706330.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:10.721Z,1509706330.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:10.737Z,1509706330.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:11.093Z,1509706331.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:11.120Z,1509706331.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:11.492Z,1509706331.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:11.521Z,1509706331.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:11.914Z,1509706331.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:11.978Z,1509706331.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:12.309Z,1509706332.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:12.367Z,1509706332.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:12.720Z,1509706332.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:12.735Z,1509706332.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:13.096Z,1509706333.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:13.164Z,1509706333.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:13.494Z,1509706333.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:13.519Z,1509706333.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:13.912Z,1509706333.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:13.951Z,1509706333.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:14.312Z,1509706334.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:14.373Z,1509706334.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:14.722Z,1509706334.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:14.737Z,1509706334.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:15.094Z,1509706335.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:15.119Z,1509706335.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:15.493Z,1509706335.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:15.522Z,1509706335.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:15.914Z,1509706335.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:15.929Z,1509706335.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:16.312Z,1509706336.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:16.334Z,1509706336.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:16.714Z,1509706336.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:16.729Z,1509706336.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:17.103Z,1509706337.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:17.129Z,1509706337.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:17.492Z,1509706337.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:17.524Z,1509706337.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:17.906Z,1509706337.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:17.931Z,1509706337.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:18.305Z,1509706338.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:18.335Z,1509706338.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:18.705Z,1509706338.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:18.735Z,1509706338.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:19.147Z,1509706339.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:19.184Z,1509706339.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:19.492Z,1509706339.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:19.533Z,1509706339.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:19.909Z,1509706339.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:19.939Z,1509706339.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:20.320Z,1509706340.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:20.335Z,1509706340.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:20.705Z,1509706340.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:20.730Z,1509706340.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:21.152Z,1509706341.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:21.208Z,1509706341.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:21.499Z,1509706341.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:21.532Z,1509706341.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:21.909Z,1509706341.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:21.939Z,1509706341.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:22.319Z,1509706342.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:22.334Z,1509706342.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:22.710Z,1509706342.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:22.743Z,1509706342.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:23.100Z,1509706343.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:23.131Z,1509706343.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:23.492Z,1509706343.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:23.515Z,1509706343.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:23.906Z,1509706343.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:23.937Z,1509706343.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:24.306Z,1509706344.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:24.337Z,1509706344.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:24.703Z,1509706344.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:24.734Z,1509706344.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:25.101Z,1509706345.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:25.132Z,1509706345.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:25.496Z,1509706345.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:25.535Z,1509706345.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:25.906Z,1509706345.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:25.930Z,1509706345.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:26.310Z,1509706346.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:26.367Z,1509706346.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:26.719Z,1509706346.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:26.772Z,1509706346.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:27.103Z,1509706347.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:27.119Z,1509706347.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:27.497Z,1509706347.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:27.513Z,1509706347.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:27.904Z,1509706347.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:27.950Z,1509706347.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:28.306Z,1509706348.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:28.327Z,1509706348.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:28.722Z,1509706348.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:28.775Z,1509706348.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:29.104Z,1509706349.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:29.151Z,1509706349.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:29.502Z,1509706349.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:29.518Z,1509706349.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:29.905Z,1509706349.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:29.922Z,1509706349.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:30.305Z,1509706350.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:30.321Z,1509706350.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:30.706Z,1509706350.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:30.722Z,1509706350.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:31.099Z,1509706351.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:31.114Z,1509706351.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:31.502Z,1509706351.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:31.517Z,1509706351.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:31.904Z,1509706351.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:31.919Z,1509706351.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:32.309Z,1509706352.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:32.324Z,1509706352.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:32.705Z,1509706352.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:32.721Z,1509706352.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:33.147Z,1509706353.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:33.178Z,1509706353.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:33.496Z,1509706353.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:33.511Z,1509706353.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:33.905Z,1509706353.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:33.921Z,1509706353.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:34.309Z,1509706354.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:34.324Z,1509706354.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:34.705Z,1509706354.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:34.720Z,1509706354.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:35.139Z,1509706355.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:35.182Z,1509706355.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:35.492Z,1509706355.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:35.523Z,1509706355.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:35.905Z,1509706355.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:35.931Z,1509706355.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:36.305Z,1509706356.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:36.339Z,1509706356.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:36.701Z,1509706356.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:36.734Z,1509706356.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:37.093Z,1509706357.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:37.125Z,1509706357.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:37.492Z,1509706357.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:37.508Z,1509706357.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:37.905Z,1509706357.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:37.939Z,1509706357.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:38.305Z,1509706358.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:38.385Z,1509706358.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:38.702Z,1509706358.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:38.733Z,1509706358.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-03T10:52:39.096Z,1509706359.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-03T10:52:39.112Z,1509706359.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
20